IRC log for #asterisk-dev on 20071201

00:29.24*** join/#asterisk-dev mog (n=mog@c-68-62-172-83.hsd1.al.comcast.net)
00:29.24*** mode/#asterisk-dev [+o mog] by ChanServ
00:50.31tzafrir_laptopQwell, still here?
00:52.01Qwellyeah
00:52.51tzafrir_laptopSomething I'm trying to understand with respect to out-of-tree modules:
00:53.24tzafrir_laptopI noticed that there's a new codec_g729.so for 1.4.15 (due to the new checksum field)
00:53.49tzafrir_laptopBut how does the single module work with various build-time configurations?
00:54.11Qwellyou mean if asterisk is compiled with something besides "normal" flags?
00:54.23Qwellit doesn't work.
00:56.36tzafrir_laptopok
00:57.07tzafrir_laptopwe're trying to figure out what to do with that and our own (Debian) out-of-tree modules
00:57.38Qwelljust build with the same cflags
00:59.52Qwell(MENUSELECT_CFLAGS, that is)
01:00.04Qwellplus devmode has to be the same
01:31.32*** join/#asterisk-dev mog (n=mog@c-68-62-172-83.hsd1.al.comcast.net)
01:31.32*** mode/#asterisk-dev [+o mog] by ChanServ
01:35.31*** join/#asterisk-dev jtodd (n=jtodd@103.sub-75-210-0.myvzw.com)
02:45.16*** join/#asterisk-dev snuff-home (n=snuffy@C-61-68-140-107.bur.connect.net.au)
02:50.16*** join/#asterisk-dev _charly_ (i=kroseneg@sunrise.schmidham.net)
03:16.37*** join/#asterisk-dev Laureano (n=chatzill@92-237-114-200.fibertel.com.ar)
03:56.08*** join/#asterisk-dev russellb (n=russell@asterisk/developer-and-stable-maintainer/drumkilla)
03:56.08*** mode/#asterisk-dev [+o russellb] by ChanServ
04:00.50*** join/#asterisk-dev outtolunc (n=me@c-67-174-216-60.hsd1.ca.comcast.net)
04:14.36*** join/#asterisk-dev moy (n=moyhu@189.169.99.32)
05:34.08*** join/#asterisk-dev pnlarsson (n=pnlarsso@c83-248-96-159.bredband.comhem.se)
08:20.49*** join/#asterisk-dev tzafrir_laptop (n=tzafrir@89.130.6.136)
08:20.49*** mode/#asterisk-dev [+o tzafrir_laptop] by ChanServ
09:09.07*** join/#asterisk-dev tzafrir_laptop (n=tzafrir@89.130.6.136)
09:09.07*** mode/#asterisk-dev [+o tzafrir_laptop] by ChanServ
11:00.33*** join/#asterisk-dev RoyK (n=roy@ip-231-27-149-91.dialup.ice.no)
11:02.57*** join/#asterisk-dev davevg-btwtech (n=davevg-b@nj-67-76-177-147.sta.embarqhsd.net)
11:05.18*** join/#asterisk-dev davevg-btwtech (n=davevg-b@nj-67-76-177-147.sta.embarqhsd.net)
12:24.55*** join/#asterisk-dev davevg-btwtech (n=davevg-b@nj-67-76-177-147.sta.embarqhsd.net)
12:51.20*** join/#asterisk-dev tzafrir_laptop (n=tzafrir@89.130.6.136)
12:51.20*** mode/#asterisk-dev [+o tzafrir_laptop] by ChanServ
14:09.25*** join/#asterisk-dev DarkRift (i=dark@bas10-montreal02-1177584058.dsl.bell.ca)
14:13.29*** join/#asterisk-dev ksteward (n=ksteward@71.174.94.169)
14:14.00*** part/#asterisk-dev ksteward (n=ksteward@71.174.94.169)
14:28.59*** join/#asterisk-dev RoyK (n=roy@ip-231-27-149-91.dialup.ice.no)
14:56.16*** join/#asterisk-dev Laureano (n=chatzill@92-237-114-200.fibertel.com.ar)
15:04.24*** join/#asterisk-dev russellb (n=russell@asterisk/developer-and-stable-maintainer/drumkilla)
15:04.24*** mode/#asterisk-dev [+o russellb] by ChanServ
15:07.42*** join/#asterisk-dev Laureano (n=chatzill@92-237-114-200.fibertel.com.ar)
15:08.13*** mode/#asterisk-dev [+o bmd] by ChanServ
15:11.50*** mode/#asterisk-dev [+o bkruse] by ChanServ
15:26.33*** join/#asterisk-dev blitzrage (n=Leif@asterisk/documenteur-extraordinaire/blitzrage)
15:26.33*** mode/#asterisk-dev [+o blitzrage] by ChanServ
15:26.48*** join/#asterisk-dev d3wayne (n=deeewayn@76.29.245.9)
15:26.48*** mode/#asterisk-dev [+o d3wayne] by ChanServ
15:27.11blitzragemorning all
15:27.19russellbg'morning blitzrage and d3wayne
15:27.25d3waynemorning guys!
15:27.33blitzragehey hey russellb and d3wayne!
15:27.36russellbwhat's up rockstars?
15:27.48d3waynegotta go, kids are in the car and parade is at grandma's
15:28.03russellbha, ok
15:28.04russellbhave fun
15:28.08blitzragerussellb: just rolled out of bed 30 seconds ago :)
15:28.21russellbnice ... i woke up at 7 something :(
15:28.51blitzrageeeeeesh
15:28.57blitzrageI made myself sleep in today
15:29.03blitzrageI was probably awake around 8ish
15:34.14Corydon76-digWhat's the Ubuntu command to select the compiler version?
15:35.15russellbhmm
15:35.41russellbsudo rm -f /usr/bin/gcc ; sudo ln -s /usr/bin/gcc-3.4 /usr/bin/gcc ?
15:35.41russellb:-p
15:41.22Corydon76-digDoesn't work... our configure script doesn't like it when the gcc version doesn't match up with the cpp version
15:41.44russellbah ...
15:48.25RoyKCorydon76-dig: then why not use cpp-3.4?
15:51.23Corydon76-digRoyK: I'm trying to replicate a problem with gcc-4.2
15:52.03Corydon76-digWith optimizations on, gcc 4.2 mangles audio
15:52.49Corydon76-digand rather than just reporting this and letting them track it down, they (gcc team) want us to track down exactly what file is improperly optimized by gcc 4.2
15:53.38*** join/#asterisk-dev tzafrir_laptop (n=tzafrir@89.130.6.136)
15:53.38*** mode/#asterisk-dev [+o tzafrir_laptop] by ChanServ
15:54.04russellbvery interesting
15:54.33russellbsounds like a tough job ...
15:55.04Corydon76-digimpossible, if I can't get Ubuntu to switch over gcc to 4.2
15:55.31russellb:(
15:55.51blitzrageOT: anyone know if motherboards usually come with a SATA->IDE connector (on MBs that support both IDE and SATA?)
15:56.17blitzrageI have a 3rd SATA drive I need to get data off of, but only have 2 SATA inputs on the board...but 2 open IDE connections....
15:59.06Iamnachohavent seen one come with them, but you can buy a SATA to ide converter
16:00.11Iamnachowe bought some cheap ones at my work. i think they are addonics brand.. got them from some yahoo store...
16:08.06blitzragegotcha... hrmmm.... I'm gonna go down to my locker to check the MB boxes... but that's kinda what I figured. Sucks, since I can't even pop one of these drives out as they are set to be a RAID array
16:09.30*** join/#asterisk-dev IgorG (i=FeedomPa@host-90-188-188-119.pppoe.omsknet.ru)
16:11.01QwellCorydon76-dig: ./configure CC=gcc-4.2 CPP=g++-4.2?
16:11.59QwellI'm pretty sure I've done something like that before
16:12.19QwellI think the right ones are listed in ./configure --help
16:13.37Qwellor you could cheat and just edit makeopts
16:17.47*** join/#asterisk-dev docelmo (n=docelmo@c-76-99-153-242.hsd1.de.comcast.net)
16:20.15docelmodoes anyone know if ast 1.4.x have an easy way to pull out the sip response code when the channel is unavailable or congested?
16:24.42IgorGdocelmo: get cause code and look for corresponding SIP cause code?
16:29.56blitzragedocelmo: I don't think so... but it might not be hard to add it to... SIPCHANINFO() function?
16:31.03*** join/#asterisk-dev jtodd (n=jtodd@blob.fox-den.com)
16:31.09blitzragejtodd: !!!
16:33.39blitzragedocelmo: oh hey, it looks like there is a X-Asterisk-HangupCause header added to the call that you could retrieve with SIP_HEADER() function (this is in trunk... not sure about 1.4... I'll check)
16:35.53blitzragedocelmo: looks to be in 1.4 as well
17:07.29*** join/#asterisk-dev IgorG (n=FeedomPa@host-90-188-188-119.pppoe.omsknet.ru)
17:39.20*** join/#asterisk-dev atisss (n=atisss@193.238.212.171)
17:40.53*** join/#asterisk-dev fakhir (n=fakhir@unaffiliated/fakhir)
17:43.29*** join/#asterisk-dev russellb (n=russell@asterisk/developer-and-stable-maintainer/drumkilla)
17:43.29*** mode/#asterisk-dev [+o russellb] by ChanServ
17:44.00docelmoblitzrage I ended up ripping it out of chan_sip.  Im looking for the actual SIP response code
17:49.34*** join/#asterisk-dev ManxPower (n=manxpowe@31.sub-75-200-19.myvzw.com)
17:54.07*** join/#asterisk-dev CunningPike (n=CunningP@S010600095b33697f.vc.shawcable.net)
17:59.02blitzragedocelmo: oh... the HangupCause doesn't contain it eh?
17:59.16*** join/#asterisk-dev caio1982 (i=caio1982@CAcert-br/caio1982)
18:00.19russellbblitzrage: i think it just has some mapping from it to an Asterisk cause code, which are very similary to ISDN cause codes
18:00.30blitzrageahhh gotcha
18:00.34blitzragethat makes sense
18:55.26*** join/#asterisk-dev bmcghee (n=brentmcg@d66-183-250-149.bchsia.telus.net)
18:56.13bmcgheehello?
18:57.55filegoodbye?
18:58.02bmcgheelol
18:58.19bmcgheefile is it ok to ask a question here. im getting an error i cant figure out how to get asterisk to launch
18:58.34filethis channel is for development talk, you probably want #asterisk
18:58.57bmcgheek thnks
19:39.32*** join/#asterisk-dev atisss (n=atisss@193.238.212.171)
20:12.53*** join/#asterisk-dev RoyKa (n=roy@ip-59-29-149-91.dialup.ice.no)
20:39.10*** join/#asterisk-dev atisss (n=atisss@193.238.212.171)
21:36.53*** join/#asterisk-dev jsmith (n=jsmith@68.247.95.55)
21:36.53*** mode/#asterisk-dev [+o jsmith] by ChanServ
21:39.45*** join/#asterisk-dev atisss (n=atisss@193.238.212.171)
22:06.22docelmoanyone up for some dev questions?
22:08.27jsmithJust go ahead and ask... if anyone knows the answer, they'll shout it out
22:10.59docelmohehe..  ok I did what I thought would work which was to use pbx_builtin_setvar_helper to set a variable in the channel.  I am doing this in chan_sip.c in the function handle_response()   The problem I am having is when I use the setvar function it doesnt actually set the variable..  Any ideas?
22:11.51docelmoThese are the 2 lines I have added to get what I am looking for
22:11.55docelmo<PROTECTED>
22:11.59docelmo<PROTECTED>
22:12.38docelmoowner from what I can tell the the struct ast_channel for the A leg of the call.  this should work shouldnt it?  or what am I doing wrong?
22:16.17docelmoAny ideas?
22:16.40jsmithI think you can set a regular variable with it, but not call the CDR dialplan function with it
22:16.44jsmithI'd try something like:
22:17.00jsmith<PROTECTED>
22:17.32docelmoI think I can work with that..  Thanks!
22:17.40docelmoI will give er a try
22:17.51jsmithAnd then from the dialplan, you could always do: Set(CDR(resp)=${CDR-resp})
22:18.25docelmoAhh yes but I need this to happen right before the mysql cdr engine cuts a CDR
22:19.21docelmoI guess I could do this in the h extension of the context.
22:22.03jsmithBe right back, gotta boot into a different kernel to try something
22:25.12*** join/#asterisk-dev jsmith (n=jsmith@68.247.95.55)
22:25.12*** mode/#asterisk-dev [+o jsmith] by ChanServ
22:52.28*** join/#asterisk-dev tzafrir_laptop (n=tzafrir@89.130.6.136)
22:52.28*** mode/#asterisk-dev [+o tzafrir_laptop] by ChanServ
22:52.34tzafrir_laptopis sruffer here?
22:52.43tzafrir_laptopsruffel, actually
22:53.51tzafrir_laptopI'm trying to understand http://svn.digium.com/view/zaptel?view=rev&rev=3271
23:00.38Qwelltzafrir_laptop: what do you mean?
23:03.17*** join/#asterisk-dev jsmith (n=jsmith@68.247.95.55)
23:03.17*** mode/#asterisk-dev [+o jsmith] by ChanServ
23:03.20tzafrir_laptopsuppose I had zaptel 1.4.1 installed and I now try to upgrade to 1.4.10 . But on the new build I configure to only build zaptel.ko and ztdummy.ko
23:04.59tzafrir_laptopI end up with the rest of the old zaptel modules in my directory
23:05.37tzafrir_laptopSo I wonder what exactly that loop should do that is not already done by modules installation
23:06.36Qwellso, you'd still have drivers from 1.4.11 installed?  that seems...wrong
23:06.59Qwelloh, you mean it won't uninstall those
23:07.27Qwellso it shouldn't be INSTALL_MODULES, it should be all modules
23:09.00docelmojsmith I did what you said and it works..  However..  Its setting the variable as a global variable.  I would rather have it set as a channel var so only the channel has access to it.
23:09.13wedhornQwell: any luck yet with your skinny tones pondering?
23:09.34Qwellwedhorn: gonna try to remember to bring in my 30vip on Monday
23:09.54wedhornok, you get the power thing sorted out?
23:10.06QwellI have a brick, just didn't want to have to bring it
23:10.42wedhornok, good luck then.
23:14.08docelmoanyone else have an idea how my issue?
23:25.58*** join/#asterisk-dev bkw_ (n=brian@adsl-70-142-57-3.dsl.tul2ok.sbcglobal.net)
23:57.39*** join/#asterisk-dev adker (n=chatzill@74-37-21-237.br1.glv.ny.frontiernet.net)

Generated by irclog2html.pl Modified by Tim Riker to work with infobot.