| 00:00.19 | *** join/#asterisk glLoadIdentity (~Tuyan@81.212.245.79) |
| 00:01.14 | *** join/#asterisk Delucia (~Delucia@ptr-66-225-153-217.ptr.terago.ca) |
| 00:01.17 | Delucia | hi there |
| 00:01.31 | mr_monkey | does anybody something about CDR in asterisk with postgres? |
| 00:01.41 | pfn | uh, install postgres |
| 00:01.43 | pfn | and rebuild asterisk |
| 00:01.47 | pfn | then configure cdr_pgsql.conf |
| 00:01.48 | pfn | done |
| 00:01.48 | Delucia | im getting 403 forbidden on my sip calls on xlite.. did anyone see this before? |
| 00:02.04 | mr_monkey | is it necessary to reinstall asterisk |
| 00:02.05 | mr_monkey | ? |
| 00:02.08 | *** join/#asterisk BBS- (~who@168.100.183.67) |
| 00:02.50 | mr_monkey | or is not ? |
| 00:03.19 | herag | i don't understand what i'm doing wrong...my broadvoice can dial out to anything in my state, i set asterisk to register with broadvoice, and then in the dialplan, i do exten => s,1,dial(SIP/broadvoice/7146124785,20)....and then I get an error saying not a local user, but I can dial this number from my sipura when it's registered with broadvoice...what am I doing wrong? |
| 00:03.42 | pfn | hrm, how do I check link stats in linux? I forget how offhand (ethernet that is, duplex, speed, etc.) |
| 00:03.48 | pfn | ifconfig doesn't give the info I need |
| 00:03.59 | pfn | mr_monkey more or less, yes, make install again |
| 00:04.16 | herag | pfn: install a network traffic monitor, e.g. iptraf or something |
| 00:04.40 | twisted | wtf is this? broadvoice day in #asterisk? |
| 00:04.55 | pfn | herag dial *11* digits |
| 00:05.09 | herag | pfn: i tried that also, no good |
| 00:05.11 | pfn | herag set fromuser=yourbroadvoicenumber |
| 00:05.18 | pfn | fromdomain=sip.broadvoice.com |
| 00:05.20 | pfn | then go try again |
| 00:05.33 | pfn | damnit, I don't have iptraf on this box |
| 00:05.43 | pfn | and I'm not supposed to "install additional software" on this box |
| 00:05.50 | pfn | I don't suppose there's some /proc/net file I can read |
| 00:06.04 | mr_monkey | ok, one more question about billing. is it necessary to execute commands such as: SetAccount , SetAMAFlags, NoCDR, etc after configuring cdr_pgsql.conf ? |
| 00:06.12 | herag | pfn: there are, but they're not nearly as useful as a monitor would be |
| 00:07.36 | herag | pfn: does the fromuser have to be the actual domain? i currently have the ip there |
| 00:07.58 | PatrickDK | that is why there is a fromdomain |
| 00:08.08 | pfn | nevermind, dmesg shows the mode |
| 00:08.11 | herag | err, sorry...not the from user...the fromdomain |
| 00:08.17 | pfn | herag just set fromdomain=sip.broadvoice.com |
| 00:08.19 | pfn | doesn't hurt |
| 00:08.22 | pfn | doesn't do shit either |
| 00:08.32 | pfn | fromuser=yourbvnumber |
| 00:09.17 | herag | this is in my sip.conf, right? |
| 00:09.52 | pfn | in your broadvoice config yes |
| 00:10.03 | *** join/#asterisk zane2 (~S@69-165-66-251.sbtnvt.adelphia.net) |
| 00:10.18 | zane2 | hello |
| 00:10.25 | herag | ya...i have those :/ |
| 00:11.00 | Moc_ | so what new ? |
| 00:11.42 | *** part/#asterisk Delucia (~Delucia@ptr-66-225-153-217.ptr.terago.ca) |
| 00:13.08 | zane2 | hey is anyone here from the UK and using an IAX provider? |
| 00:15.23 | mitchel | does anyone know what chmod command i should use on an agi script so it'll work without a permissions problem |
| 00:17.04 | mitchel | i did chmod 777 prompts.php ----> -rwxrwxrwx 1 root root 2903 May 3 01:12 prompts.php |
| 00:17.15 | mitchel | but asterisk is saying it failed to execute it |
| 00:17.23 | mitchel | Failed to execute '/var/lib/asterisk/agi-bin/prompts.php': No such file or directory |
| 00:17.23 | mitchel | <PROTECTED> |
| 00:18.01 | Moc | what was the news about people have to watch the user mailling list for ? |
| 00:18.43 | zane2 | if its 777 then it should definately work |
| 00:19.21 | pfn | mitchel make sure the first line of prompts.php is #!/usr/bin/php |
| 00:19.24 | pfn | or wherever you have php installed |
| 00:19.29 | cuban- | ~jbot translate german english saben |
| 00:19.46 | pfn | moc apparently no news |
| 00:20.01 | file | try 755 |
| 00:20.36 | mitchel | <PROTECTED> |
| 00:20.36 | mitchel | Failed to execute '/var/lib/asterisk/agi-bin/prompts.php': No such file or directory |
| 00:20.36 | mitchel | <PROTECTED> |
| 00:20.36 | mitchel | <PROTECTED> |
| 00:20.45 | mitchel | what i don't get is why it says "launched" after it says failed |
| 00:20.45 | Moc | ok... I wondered why we were ask to watch the user list |
| 00:20.58 | mitchel | pfn: i'm looking at that now |
| 00:21.08 | pfn | mitchel what is the first line of prompts.php |
| 00:21.23 | mitchel | #!/usr/local/bin/php -q |
| 00:21.35 | pfn | does /usr/local/bin/php exist? |
| 00:21.45 | pfn | moc I wonder too, but they won't tell us |
| 00:22.01 | pfn | damn bunch of secrets they don't share with the rest of us |
| 00:22.02 | pfn | hrmph |
| 00:22.05 | mitchel | pfn: =) |
| 00:22.11 | mitchel | you knocked it right on the head |
| 00:22.25 | mitchel | my other system had php in a different spot |
| 00:22.37 | mitchel | odd how it thinks it can't find it then it executes it anyways |
| 00:22.49 | mitchel | or maybe they just have limited error response codes |
| 00:22.50 | *** join/#asterisk Kumbang (~kumbang@167.205.22.54) |
| 00:26.51 | herag | if I download the asterisk source, does it come with all the zaptel and pri and whatnot modules with it? |
| 00:27.06 | *** part/#asterisk slaker (~slaker@shell1.speakeasy.net) |
| 00:28.30 | file | herag, you compile the modules... and they're separate, downloadable from CVS |
| 00:28.36 | *** join/#asterisk lwc (~phxlc@VDSL-130-13-79-92.PHNX.QWEST.NET) |
| 00:29.00 | herag | file: thank yuo |
| 00:30.19 | pfn | mitchel you should know now, I'm always right ;-) |
| 00:30.37 | zane2 | hey im having a problem making this application work. im trying to get it to automatically call 5 sequential numbers and only ring for about 2 rings, 1 after another. how do i get it to hang up on the first number and not hang up on the whole thing? |
| 00:30.54 | pfn | specify a timeout in the Dial string |
| 00:31.33 | pfn | man, I don't get how my calls add up so quickly |
| 00:31.44 | pfn | has 25% of the month gone by yet? heh |
| 00:31.50 | pfn | and damnit, where's that nowork dude |
| 00:31.54 | pfn | I wanna try out his VN termination |
| 00:32.01 | zane2 | print "EXEC DIAL IAX2/fghjfghjty\@voicepulse/1$call_number,5\n";#5 second timeout? |
| 00:32.17 | pfn | I guess, I dunno, I don't do agi |
| 00:32.32 | zane2 | blah. |
| 00:32.39 | *** join/#asterisk zeedo (~zeedo@www.bsrf.org.uk) |
| 00:36.11 | zane2 | i suck. i need to learn to program. |
| 00:36.49 | file[laptop] | zane2: you do realize there's a module for perl to do AGI stuff? |
| 00:37.25 | zane2 | yah |
| 00:37.35 | *** part/#asterisk mr_monkey (~canek@201.128.119.24) |
| 00:37.40 | zane2 | i dont know perl tho |
| 00:37.57 | file[laptop] | uh huh... |
| 00:38.05 | zane2 | or agi really |
| 00:38.14 | zane2 | im a programing noob |
| 00:40.31 | zane2 | were u talking about asterisk.gnuinter.net? |
| 00:41.40 | pfn | heh |
| 00:42.21 | *** join/#asterisk Silik0n (amscore@mother.metachar.net) |
| 00:45.04 | *** join/#asterisk cuban- (~djimenez@border0-hou.cuban.cc) |
| 00:50.03 | herag | i get an error when trying to run asterisk-1.0-RC1, i compiled it from source, no problems, i load asterisk, but I get an error: Loading module chan_modem_i4l.so failed!, something about undefined symbol ast_unregister_modem_driver |
| 00:53.14 | pfn | you need to load chan_modem.so in global |
| 00:53.24 | pfn | the sample modules.conf does this for you |
| 00:55.01 | *** join/#asterisk ebrady (~ebrady@del224003.columbus.rr.com) |
| 00:55.15 | herag | ok, it loads now :) |
| 00:55.45 | herag | sigh...i thought upgrading from 0.90 would help...i still get the "not a local user" error |
| 00:55.55 | herag | maybe what I'm trying to do can't be done? |
| 00:56.29 | slePP | 2004-08-10 18:56:16 WARNING[655378]: channel.c:466 ast_channel_walk_locked: Avoided initial deadlock for 'SIP/17806692602-254c', 10 retries! |
| 00:56.33 | slePP | this means wut? :> |
| 00:56.48 | herag | i want asterisk to tell broadvoice to take the call that arrived at the asterisk server and forward it to another number, this other number has nothing to do with asterisk, or broadvoice or anything, it's a cell phone |
| 00:59.02 | PatrickDK | zap :) |
| 00:59.34 | PatrickDK | Dial(Zap/1/cellphonenumber,50) |
| 00:59.37 | *** join/#asterisk greendisease (~jack@dsl081-200-011.nyc2.dsl.speakeasy.net) |
| 00:59.48 | herag | PatrickDK: what is zap? |
| 00:59.59 | herag | i thought I had to use SIP? |
| 01:00.03 | PatrickDK | well, you have to use something to call your cellphone |
| 01:00.09 | PatrickDK | you can use anything |
| 01:00.15 | PatrickDK | how to do go from asterisk to pstn? |
| 01:00.28 | herag | i don't |
| 01:00.34 | herag | i don't have an fxs/fxo card |
| 01:00.38 | PatrickDK | well, you can't call your cellphone than |
| 01:00.50 | PatrickDK | you could use broadvoice for pstn access |
| 01:00.51 | herag | but can't I tell asterisk to redirect the call through broadvoice? |
| 01:00.54 | PatrickDK | isn't that wat you pay them for |
| 01:01.03 | herag | ya, that's what I thought |
| 01:01.14 | PatrickDK | if broadvoice will let you have 2 calls at once |
| 01:01.20 | PatrickDK | dunno if they will let ya though |
| 01:01.34 | herag | hmm...well, they have a call forwarding feature in their web interface |
| 01:01.43 | *** join/#asterisk menger (~menger@dsl-88.243.240.220.dsl.comindico.com.au) |
| 01:01.53 | herag | like, if something rings three times at the sipura ata, it will forward to any number i specify |
| 01:02.01 | herag | i want that kind of control with asterisk |
| 01:02.08 | PatrickDK | oh, heh, easy |
| 01:02.23 | PatrickDK | if dial to sipura fails dial cellphone |
| 01:02.29 | PatrickDK | you still need pstn access somehow |
| 01:02.30 | menger | when you run the dial command |
| 01:02.32 | menger | give a timeout |
| 01:02.42 | menger | then it goes to next line in your dialplan |
| 01:02.46 | PatrickDK | 15 is good for about 3-4 rings |
| 01:02.55 | herag | right, i have something like that |
| 01:03.16 | herag | eexten => s,1,dial(SIP/broadvoice/17149876541,5) |
| 01:03.29 | herag | but then i get this bloody "not a local user" error |
| 01:03.31 | PatrickDK | 5 seconds? your nuts |
| 01:03.40 | herag | whatever...the time thing isn't important |
| 01:03.50 | PatrickDK | you have broadvoice setup in sip.conf |
| 01:03.56 | herag | yes |
| 01:04.04 | PatrickDK | you can make outgoing calls using broadvoice? |
| 01:04.10 | herag | i dunno |
| 01:04.14 | PatrickDK | heh |
| 01:04.15 | herag | how would I test that? |
| 01:04.19 | PatrickDK | dial a number |
| 01:04.22 | herag | how? |
| 01:04.31 | PatrickDK | go read the manua some more than |
| 01:04.37 | herag | sigh |
| 01:04.41 | PatrickDK | start simple before you get complex |
| 01:05.35 | menger | not a local user might mean you have to set your caller id |
| 01:05.56 | herag | menger: it's possible, becasue I get the same error even if I try to do hangup |
| 01:06.13 | herag | I thought this was simple...it's the simplest thing I could think of...I don't have any phones or anything connected to the server...it's just some box sitting in my lab |
| 01:06.40 | menger | http://www.voip-info.org/wiki-Asterisk+settings+Broadvoice |
| 01:06.48 | herag | menger: yup |
| 01:06.56 | herag | i've poured over those a million times |
| 01:07.00 | herag | i can register just fine |
| 01:07.41 | herag | i don't understand this line much at all: /${EXTEN:1}@broadvoice |
| 01:08.03 | herag | what does that mean? |
| 01:08.29 | PatrickDK | Dial(SIP/phonenumber@broadvoice) |
| 01:08.40 | menger | dials the extension with first digit removed |
| 01:08.42 | herag | that's just like making an ip level call, right? |
| 01:09.02 | herag | i can't dial out to a ptsn line with that, yes? |
| 01:09.21 | menger | depends on how your dialplan is set up |
| 01:09.39 | herag | my dialplan is two lines |
| 01:09.44 | herag | the one i pasted earlier |
| 01:09.49 | herag | and then s,1,hangup |
| 01:09.54 | herag | err, s,2,hangup |
| 01:10.20 | herag | i've tried taking out the first line, and using s,1,hangup, and I _still_ get the local user error |
| 01:10.26 | menger | change it to be like PatrickDK recommends |
| 01:10.31 | herag | asterisk can't even hangup the line properly |
| 01:10.43 | menger | okay, that is something else |
| 01:10.47 | menger | did you answer the call? |
| 01:10.55 | herag | i have to answer it? |
| 01:11.11 | herag | oops |
| 01:11.49 | menger | not sure |
| 01:11.59 | herag | !! |
| 01:12.00 | menger | i think you don't |
| 01:12.02 | herag | ooh, something happened |
| 01:12.33 | PatrickDK | with dial, you don't have to answer |
| 01:12.42 | PatrickDK | with anything else besides dial, you do |
| 01:12.52 | gambolputty | ENUM=VoIP Spam? you decide....... |
| 01:12.53 | gambolputty | http://news.com.com/Net+phone+customers+brace+for+'VoIP+spam'/2100-7352_3-5302988.html?tag=nefd.lede |
| 01:13.11 | herag | well, i just added the answer line, and now it _does_ forward to my cell phone |
| 01:13.13 | herag | whoo! |
| 01:13.40 | PatrickDK | heh, I already get those on my home phone |
| 01:13.44 | sung | jtodd: congrats |
| 01:13.49 | gambolputty | but on your VoIP phone too? |
| 01:13.56 | gambolputty | probably a matter of time |
| 01:13.58 | sung | jtodd: in regards to last week's press release |
| 01:13.59 | herag | I still get the local user error...but it's working....hmm |
| 01:14.08 | menger | not that easy |
| 01:14.29 | menger | you have to know what protocol the machine is running |
| 01:14.33 | menger | and be able to login |
| 01:14.41 | gambolputty | ok |
| 01:14.50 | PatrickDK | menger, see the ENUM statement |
| 01:14.51 | gambolputty | and port number come to think of it |
| 01:14.59 | PatrickDK | e164 tells you the protocol |
| 01:15.10 | PatrickDK | gives you all info you need to connect |
| 01:15.18 | gambolputty | the article didn't specifically mention ENUM |
| 01:15.27 | gambolputty | but for us, it is all too easy to figure out |
| 01:15.34 | menger | PatrickDK: take off e164 |
| 01:15.55 | PatrickDK | could, or I could just not accept anyone I don't want |
| 01:16.17 | menger | lol yep |
| 01:16.23 | *** join/#asterisk zane2 (~S@69-165-66-251.sbtnvt.adelphia.net) |
| 01:17.12 | gambolputty | the techniques we use to prevent, or at least slow, email spam will probably apply to VoIP spam |
| 01:17.28 | gambolputty | putting your VoIP number in a picture, for example |
| 01:18.08 | PatrickDK | heh, just have a trusted registry |
| 01:18.36 | PatrickDK | ssl certs :) |
| 01:18.45 | zane2 | hey how come when i add ",9" for a 9 second timeout, to the end of print EXEC DIAL blahblah i get Aug 10 21:13:05 WARNING[1133742896]: chan_iax2.c:5339 socket_read: Call rejected by 66.234.228.132: No such context/extension -- Hungup 'IAX2/voicepulse/7' == No one is available to answer at this time |
| 01:19.18 | zane2 | do i have the timeout formatted wrong? whenever i try to add dial options in it totally scews up the script |
| 01:19.20 | menger | zane2: sounds like the call was rejected, so the timeout does not apply |
| 01:19.20 | PatrickDK | what is the dial command? |
| 01:19.22 | bkw_ | who told you ,9 was valid? |
| 01:19.26 | bkw_ | show us the dial line |
| 01:19.45 | jizaymes | just use w |
| 01:19.57 | bkw_ | w doesn't work on voicepulse |
| 01:19.59 | jizaymes | oh, nevermind |
| 01:20.02 | jizaymes | yeah |
| 01:20.03 | bkw_ | it won't work like that guys |
| 01:20.10 | bkw_ | why do you want the ,9 anyway? |
| 01:20.24 | zane2 | print "EXEC DIAL IAX2/userid\@voicepulse/1number,9\n"; |
| 01:20.39 | bkw_ | that will not work |
| 01:20.41 | PatrickDK | hmm, must be agi |
| 01:20.45 | bkw_ | no |
| 01:20.47 | bkw_ | that doesn't work |
| 01:20.51 | bkw_ | you can't do a wait on iax |
| 01:20.51 | zane2 | i want to specify a timeout or use the H option so i can hit * and cancel the call |
| 01:21.08 | *** join/#asterisk doughecka (~rooot@doughecka.registered) |
| 01:21.09 | jizaymes | you'll have to do your exec, then do a sleep in perl, then send DTMF to the channel |
| 01:21.12 | jizaymes | i think |
| 01:21.19 | bkw_ | no thats not his goal |
| 01:21.20 | jizaymes | oh nevermind |
| 01:21.21 | jizaymes | yeah |
| 01:21.22 | jizaymes | i see this |
| 01:21.23 | bkw_ | I don't think |
| 01:21.23 | jizaymes | heh |
| 01:21.31 | jizaymes | wants to set the call timeout? |
| 01:21.35 | bkw_ | anyway i'm gonna shut up... because I have had one of those days |
| 01:21.36 | jizaymes | of 9? why not 10? or 8 |
| 01:21.42 | zane2 | i dunno |
| 01:21.43 | zane2 | i just chose 9 |
| 01:21.52 | zane2 | i just want to be able to cancel the call and go back to a menu or something |
| 01:22.08 | zane2 | i have to hang up then call back in with the way its setup now |
| 01:22.59 | sung | jizaymes |
| 01:23.05 | jizaymes | sung |
| 01:23.08 | sung | jump up jump up get down |
| 01:23.30 | zane2 | any ideas? |
| 01:23.32 | *** join/#asterisk NirS (~NirS@210.82.62.52) |
| 01:23.39 | NirS | ~seen jerjer |
| 01:23.45 | jbot | jerjer is currently on #asterisk (17h 47m 43s). Has said a total of 11 messages. Is idling for 8h 12m 25s |
| 01:23.49 | PatrickDK | maybe use | instead of , |
| 01:24.15 | PatrickDK | I have no idea from inside an agi script |
| 01:24.28 | jizaymes | you could use exec() maybe |
| 01:24.44 | jizaymes | <PROTECTED> |
| 01:24.52 | jizaymes | it seems to be in normal extensions.conf format |
| 01:25.21 | zane2 | hmm |
| 01:25.31 | zane2 | i dont think | or \ / 's will do anything |
| 01:26.06 | *** join/#asterisk GoofBall (~jsadler@npvcache-out.tellabs.com) |
| 01:27.15 | zane2 | damn this seems like it should be so easy |
| 01:27.47 | jizaymes | i think if you use exec() and look at the return code, it might be more useful |
| 01:27.51 | jizaymes | regardless of setting a timeout |
| 01:27.56 | zane2 | hmm |
| 01:28.07 | zane2 | im a noob and i dunno how to do that |
| 01:31.29 | zane2 | can i just add like print "EXEC ABSOLUTETIMEOUT 9\n"; at the end then print "HANGUP\n" print "GOTO(exten,1)" |