| 00:00.07 | Hogie | Veto: dont leave a blank line |
| 00:00.19 | Hogie | the ones below it wont show up |
| 00:00.20 | Hogie | heh |
| 00:00.28 | Hogie | (I wanted intercom as 6... but I had to put it as 3) |
| 00:00.43 | pfn | I need to replace my broken lcd on my 7960 |
| 00:00.44 | pfn | heh |
| 00:01.00 | niZon | pfn: what did you do to it? :P |
| 00:01.15 | Nethab | he probably got one with a bad LCD |
| 00:01.16 | pfn | got my wife mad at me... |
| 00:01.22 | Nethab | i saw one on ebay a few back |
| 00:01.56 | outtolunc | hogie: thats what cargo straps are for <G> |
| 00:02.07 | Hogie | outtolunc: lol |
| 00:02.44 | outtolunc | my boss has a beachcraft bonanza, it's old but sweet |
| 00:02.54 | Hogie | wtf, Im looking up airports |
| 00:03.01 | Hogie | like, the one up by my parent's house |
| 00:03.11 | Hogie | its 200+ feet higher than the one I fly out of |
| 00:03.16 | Hogie | and its only 20 miles north |
| 00:03.17 | Hogie | lol |
| 00:04.20 | Veto | Hogie: got it all working now w v4.2...will frutz with v5 upgrade tomorrow after i wake up from drinking tonight :) 7960 >>> Sipura 841. |
| 00:04.29 | Veto | But the 841 is a nice entry lvl phone for low volume. |
| 00:04.34 | outtolunc | well i wish you the best for your flight, just be prepared and remember your training |
| 00:05.53 | outtolunc | oh yeah, and no 'mile high club' in a cessna ok <G> |
| 00:06.07 | *** join/#asterisk ariel_ (~Ariel@dsl-20-177.cofs.net) |
| 00:06.12 | ariel_ | hello everyone. |
| 00:06.19 | Hogie | awwww |
| 00:06.29 | Hogie | not even in a 182 with autopilot? |
| 00:08.09 | Hogie | lol |
| 00:08.13 | *** part/#asterisk sudoer (~toy@denali.ccs.neu.edu) |
| 00:11.30 | TUplink | hwat would my managemnt user name be for IPS |
| 00:11.31 | TUplink | ? |
| 00:13.53 | Nethab | the user you set up in manager.conf in asterisk |
| 00:24.34 | Veto | Hogie: any suggestions for other ringers, the 2 default suck ass. |
| 00:29.34 | niZon | hm looks like MTS dropped |
| 00:30.09 | niZon | or something in their network |
| 00:34.00 | BoRiS | whats up with MTS? |
| 00:34.33 | Borgon | hello |
| 00:34.56 | *** join/#asterisk Felipeao (Felipeao@201.3.222.138) |
| 00:35.41 | niZon | BoRiS: I saw a bunch of MTS people drop, on other networks too |
| 00:35.41 | Borgon | I was following the broadvoice howto with asterisk from voip-org, i finally added the info to sip.conf and got asterisk to start without any errors... How do i configure my softphone to asterisk? |
| 00:35.41 | Borgon | I tried adding the asterisk server ip, etc but what port does it connect to? i tried telnetting to 5060 and its closed 5036 is open |
| 00:35.44 | niZon | seemed curious |
| 00:36.05 | niZon | it's 5060 UDP, telnet uses TCP :P |
| 00:36.43 | Borgon | aah didnt know it was udp by default |
| 00:36.54 | Borgon | Which user/pass do i put.. the broadvoice info.. or the asterisk manager pass? |
| 00:41.33 | *** join/#asterisk kimo_sabe (nick@zappa.azrackspace.net) |
| 01:01.03 | *** join/#asterisk tzanger (~tzanger@38.116.194.42) |
| 01:08.56 | *** join/#asterisk Trepalium (~chadk@wnpgmb02dc1-57-202.dynamic.mts.net) |
| 01:09.54 | *** join/#asterisk carlos-d-man (~carlos@201.128.216.57) |
| 01:12.14 | Chuji | quiet night |
| 01:14.25 | *** join/#asterisk fugitivo (~ajf@201.255.99.14) |
| 01:15.41 | carlos-d-man | Chuji do you mind helping me get started? |
| 01:16.11 | carlos-d-man | I have not been able to connect a sip phone to a recently installed cvs asterisk |
| 01:16.12 | Chuji | sure |
| 01:16.15 | Chuji | ~rtfm |
| 01:16.16 | jbot | [rtfm] read the f*cking manual... try asking me about "FAQ" |
| 01:16.23 | Chuji | ~rtfw |
| 01:16.24 | jbot | from memory, rtfw is Read That F*cking Wiki, the one at http://www.voip-info.org/tiki-index.php |
| 01:16.39 | carlos-d-man | been there |
| 01:16.48 | Qwell | ~faq |
| 01:16.53 | Chuji | ~docs |
| 01:16.54 | jbot | Documentation can be found at http://digium.com/index.php?menu=documentation or http://www.digium.com/handbook-draft.pdf or #asterisk-doc, or http://www.voip-info.org/wiki-Asterisk, or http://www.asteriskdocs.org |
| 01:17.19 | Chuji | carlos-d-man : just giving you a hard time |
| 01:17.23 | Chuji | I'll help ya |
| 01:17.24 | Qwell | jbot: faq is frequently asked question... try asking me about "RTFM" |
| 01:17.25 | jbot | Qwell: okay |
| 01:17.26 | Qwell | ~faq |
| 01:17.28 | jbot | it has been said that faq is frequently asked question... try asking me about "RTFM" |
| 01:17.34 | Qwell | nothing beats a circular reference |
| 01:18.24 | *** part/#asterisk Blissex (~Blissex@82-69-39-138.dsl.in-addr.zen.co.uk) |
| 01:18.28 | Chuji | carlos-d-man : Are you completely green? Have you ever installed asterisk? Connected a sip phone to it? |
| 01:18.40 | Chuji | Just so I know where to start with you |
| 01:20.02 | carlos-d-man | hehe |
| 01:20.15 | carlos-d-man | I installed from CVS myself :) |
| 01:21.07 | *** join/#asterisk elric (~kavit@ppp114-10.static.internode.on.net) |
| 01:21.22 | carlos-d-man | I know it's working because I see the processes with ps and I can -r into it, I have tried to connect with the sip ophone and I can see in CLI that * answers, goes into timeout and hangs up because it got no answer |
| 01:22.22 | carlos-d-man | btw those ~faq ~docs ~rtfw and ~rtfm are handy too ;) |
| 01:22.35 | Chuji | Have you configured the sip phone in sip.conf? |
| 01:24.22 | carlos-d-man | I added this to iax.conf [phone] type=phone host=dynamic dtmfmode=inband secret=phone |
| 01:25.35 | carlos-d-man | I also tried [dialx] type=friend username=dialx secret=secret? host=dynamic context=demo in iax.conf |
| 01:26.04 | Qwell | sip.conf isn't iax.conf |
| 01:26.12 | Qwell | VERY different |
| 01:26.31 | carlos-d-man | Ill delete them from there |
| 01:26.43 | carlos-d-man | but is that correct in sip.con? |
| 01:27.00 | Felipeao | Carlos, SIP accounts are created under sip.conf |
| 01:27.11 | Qwell | ~google sip.conf site:voip-info.org |
| 01:27.18 | Felipeao | Carlos, those accounts can be reached / called through Extensions.conf |
| 01:27.19 | Qwell | first link |
| 01:27.32 | Qwell | carlos-d-man: I suggest you read that |
| 01:27.41 | *** join/#asterisk coolschool (~coolschoo@server1.pointnet.co.uk) |
| 01:27.52 | carlos-d-man | ok :) |
| 01:28.02 | coolschool | anyone been successfull with the manager Action : Redirect? |
| 01:33.52 | carlos-d-man | does asterisk need to restart after I save sip.conf with the new settings? |
| 01:34.07 | coolschool | issue asterisk -rx reload |
| 01:34.20 | coolschool | or asterisk -rx "sip reload" |
| 01:38.00 | *** join/#asterisk tengulre (~tengulre@61.185.238.166) |
| 01:39.18 | carlos-d-man | Apr 22 20:35:50 NOTICE[3547]: chan_iax2.c:5761 socket_read: Rejected connect attempt from 192.168.0.180, request '0@demo' does not exist ; using [phone] username=phone secret=phone host=dynamic defaultip=192.168.0.180 |
| 01:47.17 | tengulre | Hi,all |
| 01:51.46 | coolschool | hi |
| 01:51.54 | coolschool | i am tearing my hair out tongiht! |
| 01:52.43 | tengulre | <PROTECTED> |
| 02:02.29 | Nethab | you can't get redirect to work? |
| 02:07.25 | *** join/#asterisk rabelais (~blank@ca-stmnca-cuda4-gen2c1-171.vnnyca.adelphia.net) |
| 02:09.46 | *** join/#asterisk MrBelvedr (~tt@ip68-227-218-250.dc.dc.cox.net) |
| 02:10.26 | *** join/#asterisk Ahewes (~rsb@adsl-69-107-53-145.dsl.pltn13.pacbell.net) |
| 02:10.44 | MrBelvedr | how do i configure ast to try another extension if the first extension it tries fails |
| 02:11.02 | MrBelvedr | I have 2 voip providers, say provider 1 and provider 2 |
| 02:12.01 | jontow | give it a timeout or use busy priority (n+100) and just use the next priority instead of sending to voicemail or hanging up or whatever |
| 02:12.05 | MrBelvedr | when i teminate a call with my softphone to asterisk, i want asterisk to try provider 1 first and if the call does not go through for ANY reason then it will try provider 2 |
| 02:12.33 | MrBelvedr | jontow do you know where a config example of that is online I can see? |
| 02:12.35 | *** join/#asterisk Atacomm (~dan@69.54.45.98) |
| 02:13.14 | MrBelvedr | can anybody give me an example of the most reliable way to do this? |
| 02:13.16 | Atacomm | wow, the list of people is like double since I was last in here.... :) |
| 02:13.37 | jontow | no, not offhand |
| 02:14.03 | jontow | exten => 102,1,Dial(SIP/102,15) |
| 02:14.09 | jontow | exten => 102,2,Dial(SIP/103,15) |
| 02:14.25 | jontow | exten => 102,101,Dial(SIP/103,15) |
| 02:14.30 | jontow | ...etc |
| 02:14.50 | jontow | something like that.. it'll try SIP/102 for 15 seconds, if no answer it goes to priority 2 which dials SIP/103 |
| 02:15.04 | jontow | or if busy, it jumps to n+100 which is 101.. which still dials SIP/103 |
| 02:15.11 | jontow | play with that for a while.. im sure you can figure it out :) |
| 02:15.24 | *** join/#asterisk PTG1234 (~PTG123@ip68-106-24-139.ph.ph.cox.net) |
| 02:16.43 | MrBelvedr | yeah don't really want to experiment too much |
| 02:16.55 | MrBelvedr | just want to know for sure under all conditions what will work |
| 02:16.58 | MrBelvedr | thanks though |
| 02:17.15 | MrBelvedr | i don't have too much time to experiment :) |
| 02:17.22 | jontow | then why are you here? ;) |
| 02:17.51 | *** join/#asterisk syslod (~yurplsl@65.114.15.71) |
| 02:18.06 | MrBelvedr | just tryin this before the mail list |
| 02:19.38 | syslod | Hello. |
| 02:20.20 | MrBelvedr | hello |
| 02:22.15 | syslod | Any IAX PSTN devices out there? |
| 02:22.36 | jontow | syslod.. what do you mean? FXO? or FXS? |
| 02:22.54 | syslod | FXS. |
| 02:23.15 | syslod | Tired of SIPURA 3000's |
| 02:23.54 | Nethab | IAXy? |
| 02:23.54 | PTG1234 | after about hours of being connected all day with me using it on and off, my battery life was 20% |
| 02:24.03 | PTG1234 | hope that new battery comes tommorow |
| 02:24.08 | syslod | IAXy isn't currently avail. |
| 02:24.18 | Nethab | you can still get one off ebay |
| 02:24.27 | syslod | I need like 200 of them. |
| 02:24.41 | PTG1234 | why iaxy |
| 02:24.49 | file[laptop] | PTG1234: it's just nice though isn't it? |
| 02:24.54 | syslod | IAX2 = NO NAT PROBS |
| 02:24.56 | Nethab | that's the only IAX FXS device i know of |
| 02:25.15 | Nethab | paint it orangr? |
| 02:25.18 | *** join/#asterisk IPmonger (~ipmonger@pcp0010577106pcs.coatsv01.pa.comcast.net) |
| 02:25.22 | PTG1234 | re-invite - 2mins = no nat problems :) |
| 02:25.40 | Atacomm | that was a comment one of my sales guys made when he saw the new IAXy photos, lol |
| 02:25.41 | *** part/#asterisk IPmonger (~ipmonger@pcp0010577106pcs.coatsv01.pa.comcast.net) |
| 02:25.42 | fugitivo | anyone is using stanaphone with asterisk? |
| 02:25.57 | *** join/#asterisk iq|laptop (~iq@70-59-167-162.omah.qwest.net) |
| 02:26.13 | syslod | Is the new IAXy going to do something different? Maybe more codecs? |
| 02:26.22 | Atacomm | nope, just a new shell |
| 02:26.28 | Atacomm | from what i read on digium's site |
| 02:26.41 | file[laptop] | hardware is different |
| 02:26.45 | Nethab | no ROM update |
| 02:26.47 | Nethab | ? |
| 02:26.57 | file[laptop] | it's all integrated into a single board now |
| 02:27.18 | syslod | I've been cheating here lately. Using GS routers as SIP IAX gateways. |
| 02:27.41 | Atacomm | ah, i suppose that would make it a bit cheaper to make, always wondered why it wasnt done that way |
| 02:27.44 | Nethab | I've always wondered if DIgium would ever make multi port FXS gateways |
| 02:28.12 | syslod | Anyone seen a fax solution? |
| 02:28.13 | PTG1234 | considering i can buy 4 4port atas for the same price of an iaxy, and i can get my servers out of the rtp stream, i can't understand getting an iaxy |
| 02:28.34 | Nethab | NAT is why, some people have problems with it |
| 02:28.54 | Atacomm | we sell 1 iaxy every 2-3 months....our customers prefer the sipuras....the codec support makes a huge difference for people not on a LAN |
| 02:28.56 | syslod | NAT is why, most people have problems with it |
| 02:28.57 | Nethab | and don't have the time or expertise to trouble shoot it |
| 02:29.24 | file[laptop] | I've had no problems with NAT |
| 02:29.33 | file[laptop] | the only places are where IAX2 wouldn't work either |
| 02:29.37 | Nethab | neither have I, but I just have a crappy linksys |
| 02:29.38 | syslod | Atacomm: We have had back luck with sipura + nat otherwise it works great. |
| 02:29.55 | file[laptop] | qualify, nat, canreinvite - those three and it just works (tm) |
| 02:30.06 | file[laptop] | the Sipuras have GREAT NAT stuff built in, I love it |
| 02:30.10 | Atacomm | syslod: really? we go through several thousand units of sipura a month...very few complaints |
| 02:30.30 | *** join/#asterisk jeh (~jeh@63.171.225.10) |
| 02:30.48 | syslod | Hmm. I have about 50 of them and I have around 150 customer to connnect this month. Any pointers? |
| 02:30.56 | file[laptop] | the only place I have yet to have SIP work is behind my school's firewall rules, as they are highly strict |
| 02:31.04 | file[laptop] | no UDP, very few unfiltered TCP/IP ports |
| 02:31.18 | file[laptop] | SIP even works over my GPRS connection which is NATed |
| 02:31.27 | Atacomm | file: we are looking at re-launching the ipV website either this monday or the next. wonder how surprised people will be, lol |
| 02:31.34 | PTG1234 | yah i have used sip through a double nat network |
| 02:31.38 | Atacomm | syslod: I rarely configure them, we just push them off to other service providers |
| 02:31.47 | syslod | :) |
| 02:31.56 | file[laptop] | PTG1234: that reminds me, SJphone pocket PC edition |
| 02:32.06 | PTG1234 | file: no g729 support though |
| 02:32.11 | PTG1234 | but when evdo comes out.. oh baby |
| 02:32.11 | file[laptop] | gsm though |
| 02:32.24 | file[laptop] | I have *almost* enough bandwidth |
| 02:32.26 | PTG1234 | yah i should buy a 802.11b card for this thing |
| 02:32.33 | PTG1234 | you tried it through your data connection? |
| 02:32.38 | file[laptop] | yes |
| 02:32.46 | PTG1234 | work? |
| 02:32.51 | file[laptop] | when I switched towers it greatly improved my bandwidth though ;) almost works |
| 02:32.54 | file[laptop] | jitter here and there |
| 02:33.15 | PTG1234 | hmm ok downloading now :) |
| 02:33.18 | file[laptop] | I think part of town is devoid of bandwidth, cause it sucks there... but everywhere else is half decent |
| 02:33.19 | PTG1234 | i'll give er a try |
| 02:33.28 | PTG1234 | our bw is pretty good here |
| 02:33.29 | PTG1234 | latent though |
| 02:33.31 | file[laptop] | I even streamed some radio station at lunch time and watched a video |
| 02:33.43 | PTG1234 | well sprint now has that live tv through the phone stuff |
| 02:33.46 | PTG1234 | not sure how good it is |
| 02:33.49 | PTG1234 | who is your provider? |
| 02:33.58 | file[laptop] | Rogers Wireless |
| 02:34.16 | fugitivo | anyone is using stanaphone with asterisk? |
| 02:34.22 | Nethab | blah evdo |
| 02:34.39 | PTG1234 | they getting evdo? |
| 02:34.50 | Veto | anyone know where I can find a cisco sip firmware changelog? specifically v4 -> v5 -> v6 -> v7 diffs |
| 02:34.56 | Nethab | verizon has evdo $80 a month |
| 02:34.56 | file[laptop] | it's GSM |
| 02:35.15 | file[laptop] | so they have EDGE in some places |
| 02:35.16 | PTG1234 | so i don;'t think that has much to do with no having evdo does it? |
| 02:35.18 | PTG1234 | ah |
| 02:35.30 | file[laptop] | but my ppc isn't capable of it, and so far my ppc is working for what I wanted it for |
| 02:35.37 | PTG1234 | well i am waiting and hoping for evdo |
| 02:35.47 | PTG1234 | and mine does support it already |
| 02:35.49 | Nethab | i'd much rather have wimax |
| 02:35.56 | alt | Veto: I'm using 6.3 with Asterisk and it seems to work fine. I wouldn't go into the 7.x as those images need to get a loads file to boot. |
| 02:36.05 | file[laptop] | except my wifi card, cause it sucks |
| 02:36.06 | file[laptop] | stupid sandisk |
| 02:36.14 | PTG1234 | mine is the best toy i have ever had |
| 02:36.20 | PTG1234 | yah everyone says don't buy sandisk |
| 02:36.24 | PTG1234 | i am thinking about getting a socketcom |
| 02:36.43 | PTG1234 | sandisk has a cool wifi + 256mb |
| 02:36.47 | PTG1234 | but it doesn't work with mine anyhow |
| 02:36.51 | Atacomm | i tried Sandisk on a Sokries board, never did get it to work, didnt support IDE mode...grr |
| 02:36.53 | file[laptop] | that's what I have |
| 02:36.59 | Veto | alt, I've got my new 7960 @ v4.2 atm... going to v5 then v6 is a good thing? |
| 02:37.05 | PTG1234 | file[laptop]: it works with the memory? |
| 02:37.08 | file[laptop] | yes |
| 02:37.10 | alt | I'd go to 4.4 at the very least. |
| 02:37.17 | file[laptop] | the wifi worked *once* |
| 02:37.20 | Veto | alt: I know that once I v5 I can't < v5 |
| 02:37.27 | alt | yeah |
| 02:37.50 | Veto | alt: I guess I'm wondering if v5 is way better or just the latest and greatest |
| 02:37.57 | PTG1234 | hah |
| 02:38.04 | PTG1234 | i jus tgot a 1gig card |
| 02:38.12 | PTG1234 | sjphone installed :) |
| 02:39.05 | alt | Veto: there's not much reason that I can think of. There's a couple of new features, but nothing huge. |
| 02:39.15 | PTG1234 | file: let me know when you are back |
| 02:41.53 | file[laptop] | I appear to be back |
| 02:42.33 | Veto | alt: thanks much, I'll go find a v4.4 and stick there until I find a reason to go to v5+ |
| 02:43.03 | Nethab | did they take features away after v5? |
| 02:43.11 | alt | Nethab: not that I know of. |
| 02:43.20 | Nethab | some really bad bugs? |
| 02:43.41 | Veto | I do see that v6 has new dsp code, but i'm not having quality issues in my brief testing. |
| 02:43.42 | alt | has anyone done Music-on-hold with only a SIP infrastructure? I'm getting nothing out of this thing. |
| 02:48.55 | Trepalium | Is there some kind of default username on adit 600 channel banks? I've tried resetting it again and again, and it keeps asking for a login. :-( |
| 02:49.42 | *** join/#asterisk Berkey (mikeberkey@ip70-180-160-35.lv.lv.cox.net) |
| 02:50.56 | Berkey | Is is OK to love a phone system? Cause I sure as heck am in love with asterisk! |
| 02:51.17 | Trepalium | I'm starting to wonder if the TDM card is fried, or if the firmware is busted. I'd upload firmware, but I don't have any. |
| 02:51.57 | Trepalium | Berkey: As long as it's not a Nortel Meridian, I think it's okay. |
| 02:51.57 | PTG1234 | hey file |
| 02:52.05 | PTG1234 | how do i make sjphone work for my own sip servers? |
| 02:52.09 | Nethab | haha nortel |
| 02:52.10 | Berkey | He he |
| 02:53.02 | jeh | are there known problems with callgroup pickup in current CVS? |
| 02:53.22 | file[laptop] | PTG1234: uh I haven't figured that out quite |
| 02:53.28 | file[laptop] | I got mine to register |
| 02:53.31 | file[laptop] | that's about it |
| 02:54.51 | Trepalium | Did anyone recieve those Soyo VoIP gateways that folks were talking about a couple weeks ago? |
| 02:55.15 | PTG1234 | haha |
| 02:55.18 | PTG1234 | then how did you use it? |
| 02:55.22 | PTG1234 | how did you get it to register? |
| 02:55.27 | PTG1234 | it says we can make a custom service profile |
| 02:55.31 | PTG1234 | but doesn't say how |
| 02:55.36 | file[laptop] | oh Profile... New... SIP... |
| 02:55.42 | file[laptop] | I generated a call file and called it ;) |
| 02:56.19 | Qwell | I think it was sjphone..friend got it to work on his pda |
| 02:56.47 | file[laptop] | I just haven't had time to play with it fully yet |
| 02:58.29 | PTG1234 | i see account password caller id |
| 02:58.36 | PTG1234 | how about address? |
| 02:59.13 | file[laptop] | playyyyyy |
| 02:59.40 | *** join/#asterisk Rez (lorez@lorez.staff.freenode) |
| 02:59.58 | *** join/#asterisk MajestiK (~MajestiK@S01060800208687ec.ed.shawcable.net) |
| 03:05.42 | *** join/#asterisk Moc[Train] (~mochouina@modemcable165.109-70-69.mc.videotron.ca) |
| 03:05.54 | Moc | Hail |
| 03:06.09 | *** join/#asterisk chaoscon (~ph33r@chaoscon.user) |
| 03:08.24 | jeh | I just updated our PBX from 3/12/05-CVS to Current-CVS and it appears callpickup is now broken |
| 03:08.25 | PTG1234 | its making my head hurt |
| 03:09.51 | tzanger | well I just gave away one of the biggest secrets to a successful asterisk dialplan on -users |
| 03:09.56 | tzanger | let's see if anyone picks up on it |
| 03:10.33 | file[laptop] | isn't that cute |
| 03:10.43 | tzanger | yes, yes I am |
| 03:10.55 | tzanger | Moc: welcome back |
| 03:12.45 | Atacomm | tzanger: how goes |
| 03:12.53 | tzanger | Atacomm: holy shit man |
| 03:12.55 | tzanger | long time no talk |
| 03:12.57 | tzanger | where have you been? |
| 03:13.01 | Atacomm | been busy :) |
| 03:13.03 | Atacomm | lol |
| 03:13.05 | tzanger | obviously |
| 03:13.31 | Moc | thanks, IT GOOD TO BE HERE.. |
| 03:13.37 | Moc | hey Atacomm long time no see |
| 03:13.38 | tzanger | back in la belle province |
| 03:13.41 | syslod | Whoa T.38 bounty to $4000 |
| 03:13.46 | Atacomm | lol |
| 03:15.02 | BoRiS | Just need steve to submit his current t.38 implimentation. :) |
| 03:15.37 | tzanger | T38's ratcheting up |
| 03:15.45 | tzanger | that's probably all he was waiting for |
| 03:15.46 | tzanger | :-) |
| 03:15.53 | PTG1234 | file[laptop]: you couldn't get it to dial a number? |
| 03:17.36 | file[laptop] | correct |
| 03:17.53 | file[laptop] | Proxy Authentication Required, but when looking at a sip debug asterisk was sending back a codec error which made no sense to me |
| 03:18.26 | PTG1234 | yah i am having same issue |
| 03:20.25 | PTG1234 | do you have advanced audio and compressing settings in your profile? |
| 03:20.41 | ManxPower | My Asterisk install went about as well as I expected. |
| 03:20.43 | file[laptop] | dunno, I could get up but I'm barely concious as it is |
| 03:20.49 | PTG1234 | man |
| 03:20.55 | PTG1234 | rough day at the salt mine? |
| 03:20.59 | Veto | on my 7960 my services and directories buttons don't go to the url I've defined in the SIPxxx files, running v4.4 |
| 03:21.05 | file[laptop] | I dunno, just not doing well I guess |
| 03:22.04 | ManxPower | Ouch! |
| 03:23.51 | *** join/#asterisk Moc_ (~Moc@modemcable165.109-70-69.mc.videotron.ca) |
| 03:24.32 | Nethab | Asterisk Manager question, why do SIPpeers and IAXpeers act completely different |
| 03:25.00 | syslod | Hmm. Does OpenH323 work with *? |
| 03:25.59 | Nethab | i think so, i've heard of people working with it, but it was a pain |
| 03:26.11 | PTG1234 | hmm i think i am gonna try xlite |
| 03:26.26 | file[laptop] | PTG1234: You have a copy for Pocket PC? |
| 03:26.29 | syslod | OpenH323 has a T38 modem. |
| 03:26.30 | ManxPower | <PROTECTED> |
| 03:26.33 | PTG1234 | yah i just found one :) |
| 03:26.37 | file[laptop] | GIMME GIMME GIMME |
| 03:26.46 | Nethab | really? interesting |
| 03:26.48 | PTG1234 | oh sure sure |
| 03:26.51 | PTG1234 | now your my friend |
| 03:27.02 | PTG1234 | http://www.handango.com/PlatformProductDetail.jsp?productType=2&optionId=1_2_2&jid=E44D824DF5EDFD5619DFD962F7874C6F&platformId=2&siteId=1&productId=65957§ionId=0&catalog=30&txtSearch=voip |
| 03:27.10 | ManxPower | ~google site:lists.digium.com T.38 H323 |
| 03:27.27 | syslod | Wonder if I could do T38 to H323 then queue to a modem? |
| 03:27.56 | ManxPower | syslod, If you could, then someone would be doing it with Asterisk already. |
| 03:28.26 | PTG1234 | xlite is running :) |
| 03:28.27 | PTG1234 | yay |
| 03:29.09 | file[laptop] | hrm this has something... that I can use... mmm |
| 03:29.12 | file[laptop] | might be enough bandwidth |
| 03:29.25 | syslod | ManxPower: Looks like it works. I just setup with hylafax as tty and I just recieved a T.38 fax via H323. |
| 03:29.33 | MrBelvedr | what is the softphone featured on the teliax home page? |
| 03:29.39 | Nethab | hahaha does anyone watch Enterprise |
| 03:30.02 | MrBelvedr | no |
| 03:30.34 | syslod | h323 _> T.38 driver to tty to hylafax seems to work. |
| 03:31.10 | Nethab | there's a great shot they did they took a scene from First Contact and redid it, it was hilarious |
| 03:31.20 | Nethab | for the alternate universe |
| 03:31.22 | PTG1234 | oh man |
| 03:31.28 | PTG1234 | those women looked hot tonight on enterprise |
| 03:31.47 | Nethab | Zefram Cochrane the way he was meant to be |
| 03:32.25 | *** join/#asterisk |nix (~inix@202.148.164.31) |
| 03:35.25 | Nethab | Hoshi agreed to do that scene? |
| 03:36.06 | ManxPower | I still think the tripple breasted whore of eroticon VII is hotter. |
| 03:36.19 | Nethab | Why is the manager api so inconsistent |
| 03:36.35 | MajestiK | I've got a weird problem, I can call in on IAX, or local extensions to eachother, but if I call in on my zaptel (x100p), I'm getting SIP timeout errors for each extension I'm trying to ring.. this was working before I rebooted the machine |
| 03:36.37 | ManxPower | Nethab, Because it was written by a dozen people over the course of a couple of years. |
| 03:36.43 | Nivex | mmmmm Hoshi.... I'll have to catch it Sunday. |
| 03:36.52 | ManxPower | Nethab, Which version? 1.0.x or CVS-HEAD? |
| 03:36.56 | WilliamK | You have 43 new messages, and 18 old messages... |
| 03:36.58 | Nethab | head |
| 03:36.58 | file[laptop] | whoops NAT |
| 03:37.54 | syslod | Crap. Anyone have idea why spandsp give me a "undefined symbol : inflatedInit" ? |
| 03:38.18 | ManxPower | You people don't find references to THHGTTG? |
| 03:38.22 | ManxPower | You people don't find references to THHGTTG funny? |
| 03:38.49 | Nethab | you mean reference to the movie? |
| 03:39.04 | file[laptop] | my provider's GPRS setup is wreaking havoc with xlite |
| 03:39.17 | ManxPower | file[laptop], You are suprized? |
| 03:39.19 | PTG1234 | mine was too |
| 03:39.22 | ManxPower | latency latency latency |
| 03:39.23 | PTG1234 | but i think i figured out how to fix it |
| 03:39.25 | file[laptop] | well it was working lastnight |
| 03:39.40 | PTG1234 | fixed |
| 03:39.44 | file[laptop] | I'm going through a different gateway tonight |
| 03:40.06 | PTG1234 | yay it works :) |
| 03:40.10 | PTG1234 | without a headset even |
| 03:40.11 | PTG1234 | cool |
| 03:40.11 | PTG1234 | hah |
| 03:40.20 | file[laptop] | nice |
| 03:40.34 | PTG1234 | now uninstalling crappy sjphone |
| 03:40.37 | PTG1234 | i may buy xpro for this thing |
| 03:40.39 | Nethab | 300ms is not lag, it's um a decency tape delay |
| 03:41.03 | PTG1234 | guess i have an excuse to buy a wireless card for this thing tomorow |
| 03:41.10 | PTG1234 | they need a pocket size bluetooth=wireless hub |
| 03:41.42 | file[laptop] | I'm upgrading the driver for my wifi card |
| 03:41.50 | file[laptop] | in hopes of it working |
| 03:41.51 | PTG1234 | oh something v ery cool |
| 03:41.55 | PTG1234 | the delorme bluetooth gps |
| 03:41.59 | PTG1234 | i love it |
| 03:42.11 | Nethab | porthos rocks |
| 03:42.40 | file[laptop] | PTG1234: you have it? |
| 03:42.45 | PTG1234 | you know what rocks, working all day from the golf course on your pda like i did today |
| 03:42.47 | PTG1234 | file: ya |
| 03:42.51 | file[laptop] | cool |
| 03:42.51 | PTG1234 | its awesome |
| 03:42.58 | Nivex | PTG1234: "working"? :) |
| 03:43.03 | PTG1234 | if you travel at all get one.. its cheap too |
| 03:43.16 | PTG1234 | oh but you don't drive yet :) |
| 03:43.26 | file[laptop] | hehe |
| 03:48.33 | file[laptop] | yy updated drivers fixed my wifi card |
| 03:48.34 | file[laptop] | it works now |
| 03:48.41 | PTG1234 | you suck |
| 03:50.55 | file[laptop] | the card just has to be inserted a certain way |
| 03:51.13 | PTG1234 | do you have to reboot to use it? |
| 03:51.41 | file[laptop] | when I installed the driver yeah, but after that no |
| 03:51.51 | file[laptop] | it's just there's a flaw in the way the card is designed physically, pin isn't right |
| 03:52.21 | *** join/#asterisk bjohnson (~bjohnson@66.11.165.128) |
| 03:57.55 | *** join/#asterisk BrianR___ (~brianr@db25794f132ccc95.node.tor) |
| 04:02.15 | Atacomm | mr william |
| 04:02.47 | PTG1234 | hey Mr. K |
| 04:06.06 | WilliamK | nah, didn't die |
| 04:06.21 | WilliamK | had 25 mins of voicemails (43 total) |
| 04:07.11 | WilliamK | nearly all of them were technical recruiters calling with jobs |
| 04:07.27 | Atacomm | lol |
| 04:07.38 | Atacomm | thats alot of voicemail; i avoid mine as much as possible |
| 04:11.52 | ManxPower | I love voicemail so much I never check mine. |
| 04:12.20 | *** join/#asterisk Berkey (mikeberkey@ip70-180-160-35.lv.lv.cox.net) |
| 04:12.49 | Nugget | http://www.michaelbach.de/ot/index.html <-- very very cool optical illusions (with explanations) |
| 04:13.35 | *** join/#asterisk MajestiK (~MajestiK@S01060800208687ec.ed.shawcable.net) |
| 04:19.53 | Nethab | 25 minutes |
| 04:19.53 | Nethab | all from the same person |
| 04:21.12 | WilliamK | not all from the same person, had ALOT of calls |
| 04:21.18 | WilliamK | this was 15 days worth of calls |
| 04:21.32 | Nethab | oh, ok that's not so bad |
| 04:27.58 | *** join/#asterisk tengulre (~tengulre@61.185.238.166) |
| 04:28.23 | tengulre | hi,all! |
| 04:28.42 | tengulre | does the asterisk support Dialogic hardware? |
| 04:31.41 | tengulre | I can't find source code anywhere? |
| 04:32.00 | *** join/#asterisk Veto (mdkuser@cpe-66-69-38-192.satx.res.rr.com) |
| 04:40.17 | MeTaBSD | hi |
| 04:40.33 | MeTaBSD | how can i calculate my asterisk traffic on my server ? |
| 04:40.53 | *** join/#asterisk twisted (~twisted@twisted-professional-pdpc.developer.and.friend.of.asterisk) |
| 04:40.53 | *** mode/#asterisk [+o twisted] by ChanServ |
| 04:43.19 | *** join/#asterisk Veto (mdkuser@cpe-66-69-38-192.satx.res.rr.com) |
| 04:43.45 | Veto | why would you buy a 7940 over a 7960? |
| 04:43.47 | twisted | hey Atacomm |
| 04:43.54 | Atacomm | twisted: how goes? |
| 04:44.05 | Nugget | Veto: 7940 is cheaper, isn't it? |
| 04:44.16 | twisted | Atacomm, tired.. i passed out on the couch and just woke up |
| 04:44.20 | twisted | i was supposed to be on the road tonight |
| 04:44.23 | Veto | nugget: not more than $20-30 |
| 04:44.31 | WilliamK | 7960s flooded the market about 2 weeks ago |
| 04:44.34 | Nugget | well, $20-$30 is $20-$30. :) |
| 04:44.49 | Atacomm | i never have figured out cisco's naming...... 7940 should be 7920, 7920 shouldnt be named that......7970 should be 7980.....for once be descriptive and let people know the difference with the model number |
| 04:44.54 | Nugget | $30 could get this whole channel drunk. :) |
| 04:45.01 | Atacomm | twisted: wow, lol, not good then, lol |
| 04:45.40 | Veto | nugget: who says it isn't already? |
| 04:45.42 | twisted | it's not too bad |
| 04:45.46 | WilliamK | so has anyone had a chance to see the Soyo N400S yet? |
| 04:45.46 | Nugget | good point. :) |
| 04:45.55 | twisted | my 'thing' isn't until sunday, so I can leave tomorrow :) |
| 04:46.23 | *** join/#asterisk syle (~blah@wnpgmb02dc1-177-70.dynamic.mts.net) |
| 04:46.25 | Atacomm | twisted, bad bad autoresponder, lol |
| 04:46.32 | twisted | lol |
| 04:46.35 | twisted | i forget how to work this thing |
| 04:46.36 | twisted | hangon |
| 04:46.41 | twisted | there we go |
| 04:46.45 | twisted | try again |
| 04:48.15 | *** join/#asterisk freat (~freat@c-67-162-109-129.hsd1.il.comcast.net) |
| 04:52.54 | Veto | do I need to run v5+ to get directory_url to work on my 7960? I set it up, url works...directories button doesn't bring it up. |
| 04:53.48 | Veto | WilliamK: they were running 4 bills, right? (7960) |
| 04:57.40 | Veto | err, 4 c notes |
| 04:58.36 | *** join/#asterisk heison (~heison@CPE000a01d49e6f-CM00111a59bec2.cpe.net.cable.rogers.com) |
| 04:58.48 | Nethab | what about polycomm? haven't seen to many of those around |
| 04:59.35 | Nugget | I like my 7960, but I'd be just as happy with a 7940. I only use three of the line buttons. |
| 04:59.49 | Nugget | doubly so for the ones I have in the guest bedroom and kitchen. |
| 04:59.51 | Veto | we almost bought a IP600 to test for spkr, but trying 7960 first. |
| 05:00.12 | *** join/#asterisk newmember (~newmember@S010600a0c93dce87.cg.shawcable.net) |
| 05:00.48 | Veto | nugget: any idea why my directories button only brings up default? url looks good in fx. |
| 05:02.19 | Nethab | I almost got an IP500 but the seller was a sphincter nugget |
| 05:02.24 | Veto | also set services to services to berbee.com and nada. |
| 05:03.15 | Nugget | I wrote my own. |
| 05:03.39 | Nugget | I'm finding the address book to be a lot more useful than I'd expected. |
| 05:04.06 | Nugget | I figured it was more novelty than it was worthwhile, but I'm happily surprised that I use it |
| 05:04.08 | Veto | Nethab: my wife fuxored some brownies last night, came out of the kitchen and said, "those are some ass brownies"...I lmao. |
| 05:04.58 | Veto | nugget: I'd love to, but first I want http://dir.domain.com/asterisk/directory.html to work. |
| 05:04.59 | Nethab | taste just like chicken |
| 05:05.25 | Nethab | oh haha i made a double entendre sorry nugget |
| 05:06.29 | Nugget | Nethab: http://slacker.com/~nugget/asterisk8.php |
| 05:06.54 | Veto | on v4.4 if directory_url is right, shouldn't it: a) be an option on the menu or b) replace the default? (first cisco phone) |
| 05:07.13 | Nugget | [directory] [5] |
| 05:09.11 | Veto | what's wrong with my test url: http://album.geocomputing.net/asterisk/directory.html ? |
| 05:09.34 | Nugget | don't indent any of the lines. |
| 05:10.07 | Nugget | you also have an opened <directoryentry> at the end with no close and no content |
| 05:12.24 | Veto | nugget: fixed, but still only 4 options. (rebooted, reloaded) |
| 05:12.32 | Nugget | strange. |
| 05:13.05 | Veto | running v4.4 |
| 05:13.11 | Nugget | that's ancient |
| 05:13.42 | Veto | should I v5? phone was de-cherried earlier to v2 -> 3 -> 4 |
| 05:13.49 | Nugget | current is 7.3 |
| 05:14.11 | Veto | but does v5 -> v6 buy me anything (like directory) ? |
| 05:14.28 | Nugget | I dunno, I've only ever run 7.x |
| 05:14.46 | Veto | bah, back in a bit...gonna v5 then. |
| 05:15.05 | Veto | that's the one way upgrade, right? |
| 05:15.26 | Nugget | dunno, sorry |
| 05:19.27 | Veto | okay, I think I know now. looks like my v3 v4 v5 failed, settings->status->firmware still says p0s030203.. |
| 05:19.35 | Nugget | oops |
| 05:19.52 | Veto | even though tftp logs says it asked for it. |
| 05:20.39 | Nugget | make sure OS79XX.TXT agrees with the SIP[foo].cnf |
| 05:21.21 | Veto | and with SIPDefault.cnf, done |
| 05:22.04 | Veto | there a reboot sequence from keypad to avoid turning phone over to pull power? |
| 05:23.09 | Nugget | * 6 and settings |
| 05:23.13 | Nugget | all at the same time |
| 05:23.24 | *** join/#asterisk SilentBob420 (silentbob@mrburns.4twenty.us) |
| 05:24.33 | Veto | thx |
| 05:24.53 | Veto | hmm: log: |
| 05:24.57 | Veto | Apr 23 05:22:01 cerberus in.tftpd[10772]: RRQ from 10.0.0.168 filename OS79XX.TXT |
| 05:24.57 | Veto | Apr 23 05:22:01 cerberus in.tftpd[10773]: RRQ from 10.0.0.168 filename SIPDefault.cnf |
| 05:24.57 | Veto | Apr 23 05:22:01 cerberus in.tftpd[10774]: RRQ from 10.0.0.168 filename /SIP0007EB26DC09.cnf |
| 05:24.57 | Veto | Apr 23 05:22:02 cerberus in.tftpd[10777]: RRQ from 10.0.0.168 filename P0S30300.bin |
| 05:24.57 | Veto | Apr 23 05:22:03 cerberus in.tftpd[10778]: RRQ from 10.0.0.168 filename RINGLIST.DAT |
| 05:24.57 | Veto | Apr 23 05:22:03 cerberus in.tftpd[10778]: sending NAK (1, File not found) to 10.0.0.168 |
| 05:24.58 | ScythelX | hey all i have zaptel and ztdummy loaded but asterisk still cant open the timing module - is the only other thing tha tneeds to be compiled into the kernel USB UHCI |
| 05:24.59 | Veto | Apr 23 05:22:03 cerberus in.tftpd[10779]: RRQ from 10.0.0.168 filename dialplan.xml |
| 05:25.10 | Nethab | argh my eyes they burn! |
| 05:25.13 | Veto | but I still show p0s0203 |
| 05:25.17 | Veto | sorry :p |
| 05:25.19 | ScythelX | and does it matter if its compiled as a module or built into the kernel |
| 05:25.31 | Nugget | I dunno, Veto, sorry. |
| 05:25.41 | Veto | no worries, I'll mess with it. |
| 05:25.49 | *** join/#asterisk brad[] (~brad@brad.developer.gentoo) |
| 05:31.36 | *** join/#asterisk |nix (~inix@202.148.164.31) |
| 05:33.54 | Veto | nugget: was using p0s30300 instead of p0s-03-0-00 |
| 05:34.21 | Nugget | oops |
| 05:34.38 | Nugget | then again, I love simple solutions. :) |
| 05:35.23 | Veto | now to v4.2 (3.0 didn't have [5] on directory) |
| 05:36.00 | Nugget | much nicer than "Linux kernel 2.6.9 has an unstable ipfilter tunnel and you need to upgrade to 2.6.19-bleeding-edge-not-even-linus-trusts fork with patches from some guy in sweden in order for tftp to be able to negotiate mtu with the cisco" |
| 05:37.22 | Veto | lol, lets talk fun...I'm going to do a rhel3 -> rhel4 (centos) upgrade this weekend, coloed....hope like hell it works. |
| 05:37.23 | *** join/#asterisk elric (~kavit@ppp114-10.static.internode.on.net) |
| 05:37.44 | Veto | fyi, 4.2 has [5] External Directory. |
| 05:38.31 | Nugget | spiffy |
| 05:38.59 | Veto | I want to do it via yum, but the initrd issue concerns me...if I can get it to boot, I'm good. |
| 05:39.37 | Nugget | don't look at me, I hate linux. :) |
| 05:39.55 | Veto | or does linux hate you? :) |
| 05:40.02 | Nugget | we're on speaking terms |
| 05:40.41 | Veto | heh, you have any netapp filers? |
| 05:41.04 | Nugget | nope, I'm strictly garage-built kit. |
| 05:41.08 | `Sauron | Nugget |
| 05:41.46 | `Sauron | What's this tftp mtu stuff? :p |
| 05:41.51 | Nugget | la la la |
| 05:42.00 | Veto | for future reference, v4.2+ seem to support [5] External Directory and external [services] |
| 05:42.04 | `Sauron | That's what I thought. |
| 05:42.12 | Nugget | I hope I never need to know that, Veto. :) |
| 05:42.28 | Veto | indeed! |
| 05:42.47 | *** join/#asterisk file (~file@mctn1-7378.nb.aliant.net) |
| 05:48.30 | Nethab | I'm surprised at how many Cisco phones i see in TV shows |
| 05:48.41 | Nugget | cisco phones and powerbooks. |
| 05:48.46 | Nugget | it's all about Teh Sexy |
| 05:49.10 | Qwell | watch a low budget show, see if they have barbietones |
| 06:03.00 | ScythelX | can anyone point me in the right direction to get ztdummy working correctly |
| 06:03.11 | ScythelX | i get this error cant open pseudo channel for timing... Sound may be choppy. |
| 06:03.51 | ScythelX | I have 2.6 and did make linux26 |
| 06:04.13 | ScythelX | ast zaptel # lsmod |
| 06:04.13 | ScythelX | Module Size Used by |
| 06:04.13 | ScythelX | ztdummy 2596 0 |
| 06:04.13 | ScythelX | zaptel 222020 1 ztdummy |
| 06:04.27 | *** join/#asterisk BoRiS (boris@S01060040ca1e5b54.wp.shawcable.net) |
| 06:06.02 | Atacomm | hey boris |
| 06:06.59 | iq|laptop | Hi, anyone using AAH. Is hostname someone linked to AAH? Does changing hostname make asterisk stop accepting requests? |
| 06:08.21 | BoRiS | hi Atacomm, How are you? |
| 06:08.46 | ScythelX | anyone? :/ |
| 06:08.53 | BoRiS | I haven't seen you in awhile.... Good to see you. :) |
| 06:09.02 | Atacomm | BoRiS: tired :) just did the smoke test tonight on our latest card revision, passed with flying colors :) |
| 06:11.28 | BoRiS | I am feeling tired myself.... Also nothings good on TV right now. Is that your ipVolution TDM card? |
| 06:11.34 | Atacomm | yup |
| 06:11.42 | Atacomm | wanna see? |
| 06:11.53 | BoRiS | Sure. :) |
| 06:12.02 | Atacomm | email? |
| 06:12.12 | ScythelX | do i still need to compile in usb support even though the linux26 zaptel ztdummy uses the pcs interal clock? |
| 06:13.03 | *** join/#asterisk spiral-dive (~wanderer@c211-28-253-110.eburwd5.vic.optusnet.com.au) |
| 06:13.12 | BoRiS | nope |
| 06:13.31 | BoRiS | Remember to uncomment the # ztdummy in the Makefile |
| 06:14.39 | ScythelX | hmm |
| 06:16.33 | brad[] | Am I right in assuming I have to add something to my dialplan to get hookflash from an IP phone to translate to a line flash on an X100P card? |
| 06:16.55 | ScythelX | boris: the modules load but asterisk isnt working with them ie; |
| 06:16.56 | ScythelX | Module Size Used by |
| 06:16.56 | ScythelX | ztdummy 2596 0 |
| 06:16.56 | ScythelX | zaptel 222020 1 ztdummy |
| 06:17.14 | ScythelX | res_musiconhold.c:817 moh_register: Unable to open pseudo channel for timing... Sound may be choppy. |
| 06:20.10 | Qwell | brad[]: FXO shouldn't really do callerid, from what I've heard |
| 06:20.17 | Qwell | erm...call waiting |
| 06:20.58 | Qwell | brad[]: Its a PBX, not a <insert random non-PBX device that might pertain to the above> |
| 06:21.56 | Qwell | simply put, if you want two calls, get two lines |
| 06:23.15 | Qwell | call waiting/threeway calling is a hack anyways, isn't it? |
| 06:23.34 | Qwell | seems like its a bit hackish |
| 06:24.26 | spiral-dive | hey ppl I have jsut installed * and got extension working, but I have anoying problem of console messages re MySQL db rate_engine and unknown DB ratings - How do I fix this - or make it go away?? |
| 06:25.09 | spiral-dive | os is debian |
| 06:25.20 | newl | add the database and associated tables, or do not load the rate engine. |
| 06:25.21 | Veto | nugget: moved to v5.3 so far, but now the logo is kicking my ass...gimp, don't fail me now. |
| 06:25.30 | niZon | spiral-dive: well asterisk -r -x 'stop now' will make it go away |
| 06:25.36 | niZon | :P |
| 06:26.05 | Veto | nugget: fyi, HUGE quality diff between v2 and v4/5 |
| 06:26.08 | niZon | Veto: 7960 firmware? |
| 06:26.09 | spiral-dive | niZon - thanks - not wuite the answer I was looking for ;-) |
| 06:26.18 | Veto | niZon: yea |
| 06:26.38 | niZon | spiral-dive: it looks like * can't find the ratings database, maybe you named it something else? |
| 06:26.47 | niZon | Veto: yum |
| 06:27.03 | niZon | where did you get your 7960? |
| 06:27.23 | Veto | Volt |
| 06:27.49 | spiral-dive | newl - how do I add the db?? is it another "module" or sumthin? Obviously the db would require tables defined etc - so if it is not a "plugin" there must be some instructions for creating it?? |
| 06:28.12 | spiral-dive | niZon - didnt name the database anything - didnt know about it till I got the console messages |
| 06:29.13 | spiral-dive | niZon do you know where it is supposed to be located?? - it may have the wrong owner/perms |
| 06:29.25 | spiral-dive | or it may not exist at all |
| 06:29.38 | niZon | hmm |
| 06:30.03 | niZon | not sure |
| 06:32.19 | spiral-dive | tried turning it off in rate_engine.conf - seems to ignore that |
| 06:32.37 | spiral-dive | cant seem to find any other reference to it |
| 06:33.49 | Veto | niZon: Volt had a good deal and "frosty" there was great help. |
| 06:35.52 | brad[] | Qwell: Yeah, I've been finding that - call-waiting is rarely appropriate when a PBX is being used anyway.. this is a bit of an odd setup though |
| 06:35.56 | Veto | any reason to go to v6 on 7960 over v5 fw? |
| 06:37.29 | blitzrage | why not v7? |
| 06:37.30 | BoRiS | Veto: Are you in a firmware binge? Upgrading to v2->6 now? hehe |
| 06:38.11 | Veto | BoRiS: lol, indeed...v++ on the brain! |
| 06:38.50 | niZon | Veto: how much did you pay? |
| 06:38.55 | Veto | I see new dsp code in v6, wondering if if it makes a diff. |
| 06:39.10 | Veto | niZon: $270 |
| 06:39.15 | niZon | hmm |
| 06:39.46 | Veto | not a g, just a 60 |
| 06:40.03 | niZon | there's hardly any difference |
| 06:40.11 | Veto | icons, right? |
| 06:40.11 | BoRiS | Sorry, I don't have any Cisco phones..... yet. :-p |
| 06:40.11 | Nethab | what's the difference between the 60 and 60g |
| 06:40.34 | Veto | Icons, my understanding Nethab. |
| 06:40.35 | niZon | BoRiS: do you know of any place in winnipeg that can sell them? |
| 06:41.01 | Nethab | icons, they made a product revision with a new letter and all it was new icons? |
| 06:41.15 | Veto | g = Global, icons instead of english. |
| 06:41.17 | BoRiS | locally....Hmmmmmmmm |
| 06:41.29 | Nethab | oh i18n i guess that's a good reason |
| 06:42.35 | Veto | somewhere in there they changed poe, I think. We are home->nat deployed, so no diff to us on that. |
| 06:44.16 | niZon | hmm maybe elite would have them |
| 06:45.00 | niZon | or not |
| 06:49.54 | *** join/#asterisk Micc (~mic@c-24-18-35-120.hsd1.wa.comcast.net) |
| 06:50.09 | Micc | Ok, this is driving me crazy... |
| 06:50.15 | Micc | I've got two asterisk servers. |
| 06:50.22 | Micc | One on Linux and one on FreeBSD. |
| 06:50.25 | BoRiS | I dont think so..... MTS does. :) |
| 06:50.28 | Micc | Using the same configs. |
| 06:50.54 | niZon | MTS eh |
| 06:50.57 | Micc | I had it working earlier on both. Then I change my IP address and it doesn't work. |
| 06:51.01 | BoRiS | I've used one at their technical showroom. :) |
| 06:51.06 | Micc | So the linux one always worked I didn't change anything. |
| 06:51.16 | Micc | But it breaks for a few minutes too. |
| 06:51.18 | niZon | i wonder what they'll charge for a 7960 |
| 06:51.26 | niZon | probablly about $500 |
| 06:51.28 | Micc | Then I do some tweaking which it shouldn't have needed and it works again. |
| 06:51.45 | BoRiS | But of course... I dont think they sell the ones you want for retail. |
| 06:51.47 | Micc | But I can't get my FreeBSD impl to read any sip packets. |
| 06:51.55 | niZon | red river has a ton of cisco phones :P |
| 06:52.11 | PTG1234 | what does it do micc? |
| 06:52.21 | PTG1234 | and have you reset the arp tables in the switch/routers? |
| 06:52.44 | Micc | no, I'm thinking that has to be it. |
| 06:52.59 | PTG1234 | ya most likely :) |
| 06:53.01 | PTG1234 | if you see no packets |
| 06:53.02 | BoRiS | niZon: They always charge insane prices. |
| 06:53.05 | PTG1234 | and an ip change caused it |
| 06:53.12 | Micc | I need to get my boss to give me the password to the router so I can reset it. |
| 06:53.33 | spiral-dive | turn it off and on again ;-) |
| 06:53.40 | Micc | Yeah, I should have thought of that earlier. I was just too frustrated because I had a bad cat5 cable for a while too. |
| 06:54.25 | PTG1234 | hah |
| 06:54.26 | niZon | BoRiS: yeah, mts sucks |
| 06:54.32 | PTG1234 | don't need the password to yank that power cable :) |
| 06:56.22 | spiral-dive | Micc, explain it like this - woops I tripped and the power cord fell out |
| 06:56.27 | Micc | I got it. |
| 06:56.56 | PTG1234 | what was it? :) |
| 06:57.16 | spiral-dive | there goes the security of the place hehehe |
| 06:57.48 | niZon | pff i think iax.cc gets their DIDs from group telecom |
| 06:58.54 | BoRiS | nope |
| 06:59.04 | BoRiS | It passes THRU group telecom |
| 06:59.40 | BoRiS | 480 - xxxx = Group Telecom a.k.a now a Bell Canada company |
| 07:04.00 | niZon | ah |
| 07:04.21 | niZon | well they're taking FOREVER to get their 204 DIDs active |
| 07:04.57 | niZon | and Les isn't offering a per minute thing anymore :\ |
| 07:05.27 | BoRiS | whats he now offering? |
| 07:05.49 | niZon | some residential unlimited or something |
| 07:06.08 | BoRiS | hehe |
| 07:06.17 | niZon | I don't think I'd use it enough to justify paying what he was charging |
| 07:07.12 | niZon | so are you a consultant? |
| 07:07.35 | BoRiS | Yes. :) |
| 07:07.53 | niZon | ah cool |
| 07:07.57 | BoRiS | Thanks. |
| 07:08.24 | BoRiS | :) |
| 07:08.27 | niZon | what kind of consulting do you do? |
| 07:20.59 | iq|laptop | hi, How to change default Music on hold ? |
| 07:22.11 | iq|laptop | I got few mp3 files in mohmp3 folder... how to specify which one to use in musiconhold.conf ? |
| 07:26.59 | *** join/#asterisk RoyK (~roy@143.80-202-166.nextgentel.com) |
| 07:34.32 | *** join/#asterisk Micc (~mic@c-24-18-35-120.hsd1.wa.comcast.net) |
| 07:34.42 | Micc | ok, all is good now. phew |
| 07:36.37 | *** part/#asterisk Nethab (~chatzilla@adsl-67-113-141-170.dsl.sntc01.pacbell.net) |
| 07:51.30 | *** join/#asterisk rvhi (~rv@66.175.65.89) |
| 07:54.17 | *** join/#asterisk peted20 (~chatzilla@d14-217.rb.gh.centurytel.net) |
| 07:55.57 | *** join/#asterisk djin (~djin@gridfox.xs4all.nl) |
| 07:57.18 | *** join/#asterisk rvhi (~rv@66.175.65.89) |
| 08:03.04 | *** join/#asterisk rvhi (~rv@66.175.65.89) |
| 08:08.57 | *** join/#asterisk zeedo (~zeedo@www.bsrf.org.uk) |
| 08:25.05 | *** join/#asterisk ckruetze (HydraIRC@cpc3-cmbg7-5-0-cust100.cmbg.cable.ntl.com) |
| 08:29.14 | *** join/#asterisk oden (~oden@194-237-146-22.customer.telia.com) |
| 08:34.20 | RoyK | http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&category=8278&item=7509040464&rd=1 |
| 08:34.26 | RoyK | LOL |
| 08:34.26 | RoyK | I want that camera |
| 08:35.05 | illuvator | OK, I need an opionion |
| 08:35.19 | RoyK | you are stupid! |
| 08:35.29 | Atacomm | lol |
| 08:35.58 | illuvator | Do you think I can do 240 channels of ISDN/muLAW <-> GSM/IAX2? |
| 08:36.02 | Atacomm | roy: we've been looking at a $4000 Sony HDV camcorder for promo videos here at work :) cameras are fun, lol |
| 08:36.30 | RoyK | illuvator: on what hardware? |
| 08:36.56 | RoyK | Atacomm: I just bought a 4x5" linhof camera :) |
| 08:37.03 | illuvator | RoyK: 4-way opteron 2.0 GHz 4GB of RAM |
| 08:37.13 | Atacomm | RoyK: cool cool |
| 08:37.38 | RoyK | illuvator: er. you can prolly do with far less than that |
| 08:37.48 | Atacomm | RoyK: we just got our prototypes of our ipVolution TDM120 and TDM60 :) lol, it would make his 4-way opteron obsolete ;) |
| 08:38.42 | RoyK | hm |
| 08:38.46 | RoyK | what? |
| 08:39.16 | *** join/#asterisk Ridgeback (~Ridgeback@ppp130-78.lns1.adl2.internode.on.net) |
| 08:39.20 | Ridgeback | hello |
| 08:39.23 | RoyK | <PROTECTED> |
| 08:39.41 | illuvator | Atacomm: can it do hardware G.729A? and does it work with asterisk? |
| 08:39.44 | Ridgeback | anyone know of a good DID providor using IAX? |
| 08:39.46 | Atacomm | royk: you didnt hear about our project to build 4 t1/e1 cards with onboard DSP for echo & codec? :) Digium cancelled our reseller contract back in january because of it....we finally got our prototypes, they look as complicated as highend video cards :) |
| 08:40.28 | Atacomm | illuvator: G729A will be supported, it will be licensed seperately to keep the card price down for those who don't want it. We haven't yet secured the license on G729A but we do have the codec partially implimented at this time |
| 08:40.48 | Atacomm | and asterisk is our primary market at this time |
| 08:41.07 | illuvator | how is it being implemented? PLD? |
| 08:41.29 | RoyK | Atacomm: hehe |
| 08:41.32 | RoyK | fuck |
| 08:41.38 | RoyK | those digium cards really suck |
| 08:41.47 | illuvator | yep |
| 08:42.26 | illuvator | i'm still getting jim dixon's tormeta 2's from this guy in ohio |
| 08:42.40 | Atacomm | massive FPGA :) |
| 08:42.57 | illuvator | must be half the size of the board :) |
| 08:43.16 | Atacomm | haha, not really... the 32MB of ram takes up about 1/3 of the board :) |
| 08:43.32 | illuvator | "CPU calling space ship xylinx, come in xylinc" |
| 08:43.44 | Atacomm | hahaha |
| 08:44.14 | illuvator | still can't be as impressive as some of the dialogic cards i've seen |
| 08:44.25 | illuvator | full length PCI with full size daughter boards |
| 08:44.34 | illuvator | scary |
| 08:44.50 | Atacomm | lol...dialogic though is a very old design :) we are only 1/3 of an inch longer than the TE410P and can replace a dual xeon with a celeron |
| 08:45.08 | illuvator | yeah |
| 08:45.13 | illuvator | this will be really good when its ready |
| 08:45.19 | illuvator | and if it works right and is stable :) |
| 08:45.35 | illuvator | please tell me you're not implementing the PCI interface in the FPGA |
| 08:45.40 | Atacomm | of course i beleive the Dialogic is 100% end user programmable where as ours isn't |
| 08:46.03 | Atacomm | The PCI interface is on the FPGA, on the PCIe versions its external |
| 08:46.16 | illuvator | yuck yuck yuck |
| 08:46.35 | Atacomm | actually FPGA PCI isn't bad, lots of vendors do it. some just do it really bad |
| 08:46.44 | illuvator | well hopfully at least you bought a readymade PCI subsystem for the FPGA then |
| 08:46.49 | illuvator | yes, like digium |
| 08:46.53 | Atacomm | lol |
| 08:47.05 | Atacomm | i had no desire to write that myself |
| 08:48.54 | *** join/#asterisk Rez (lorez@lorez.staff.freenode) |
| 08:49.43 | *** join/#asterisk jonas (jonas@jonas.probe-networks.host.freenode) |
| 08:50.43 | *** join/#asterisk L|NUX (~linux@202.63.195.187) |
| 08:51.08 | L|NUX | Server is located in the US. L|NUX is located in pakistan on dialup. he is trying to register his softphone to the server. He cannot ping the server. Someone here mentioned the servers address block used to be private,but Linux can ssh into the server,just cannot get registered via sip. I dont know,we have tried everything. I can register to the server,he can register my * at my home, he has tried multiple accounts. From viewing debug,he |
| 08:51.15 | L|NUX | says "hello", * says "hello" unauth'd,register please, then it cannot get past that. |
| 08:51.32 | L|NUX | any idea ? |
| 08:51.44 | *** join/#asterisk nine76 (~t00r@cpe-69-135-184-24.woh.res.rr.com) |
| 08:52.45 | L|NUX | any one alive ? |
| 08:53.36 | L|NUX | hello |
| 09:06.35 | *** join/#asterisk jalsot_ (~tamas@abacus.eworldcom.hu) |
| 09:15.11 | *** join/#asterisk ManxPower (~eric@72-254-154-77.client.stsn.net) |
| 09:43.56 | *** join/#asterisk Ridgeback (~Ridgeback@ppp142-99.lns1.adl2.internode.on.net) |
| 09:44.32 | Ridgeback | anyone know of a good DID using IAX providor in the U.S.?? |
| 09:48.57 | Atacomm | lol |
| 09:49.11 | Atacomm | ADSL isnt fast enough? |
| 09:50.07 | Atacomm | roy, your email bounced, i just tried again |
| 09:50.17 | Atacomm | it said command timeout |
| 09:55.10 | Atacomm | ~seen clive |
| 09:55.13 | jbot | clive <~clive@chills.demon.co.uk> was last seen on IRC in channel #gllug, 85d 20h 19m 35s ago, saying: 'Sounds bad'. |
| 10:10.50 | *** part/#asterisk queuetue (~Scott@h69-21-252-54.69-21.unk.tds.net) |
| 10:21.41 | inspired | hmm, if no agents are logged into a queue, can I have a n+1 priority (nobody is available to answer your call at this time)? |
| 10:22.24 | inspired | the wiki page says Queue returns 0 if noone is logged in, but that can't be right |
| 10:30.13 | *** join/#asterisk L|NUX (~linux@202.63.195.187) |
| 10:30.33 | *** part/#asterisk RichiH (richih@richih.staff.freenode) |
| 10:30.33 | L|NUX | hello |
| 10:30.35 | L|NUX | can some one tell me how can i change sip realm ? |
| 10:33.01 | L|NUX | ok bye |
| 10:34.34 | *** join/#asterisk julianjm (~julianjm@250.Red-80-59-67.pooles.rima-tde.net) |
| 10:35.08 | *** join/#asterisk sunil (~sunil@202.54.37.190) |
| 10:37.03 | *** join/#asterisk MikeJ[Laptop] (~jayden@pcp02795302pcs.roylok01.mi.comcast.net) |
| 10:44.21 | *** join/#asterisk delphiuk (~richard@host81-155-71-212.range81-155.btcentralplus.com) |
| 10:44.57 | *** join/#asterisk cmk (~cmk_@p54A3BFAF.dip.t-dialin.net) |
| 10:46.06 | *** join/#asterisk gambolputty (~gambolput@cblmdm65-221-51-80.buckeye-express.com) |
| 10:54.11 | *** part/#asterisk Ridgeback (~Ridgeback@ppp142-99.lns1.adl2.internode.on.net) |
| 10:54.48 | newl | heh |
| 11:00.58 | *** join/#asterisk cmk (~cmk_@p54A3BFAF.dip.t-dialin.net) |
| 11:20.12 | *** join/#asterisk peterc (~peter@host217-35-138-153.in-addr.btopenworld.com) |
| 11:32.00 | *** join/#asterisk rvhi (~rv@66.175.65.89) |
| 11:47.34 | *** join/#asterisk easimon (~easimon@localhorst.kawo2.RWTH-Aachen.DE) |
| 11:54.56 | *** join/#asterisk yaboo (~jsirucka@220.245.131.131) |
| 11:55.04 | yaboo | join #wrt54g |
| 11:56.14 | *** join/#asterisk zotz (~zotz@24.231.32.109) |
| 11:56.23 | *** join/#asterisk Druken (~druken@CPE00119539b9cc-CM000e5cde4ca2.cpe.net.cable.rogers.com) |
| 11:56.29 | Druken | housework sucks ass |
| 11:56.35 | *** join/#asterisk ViZ` (vogon@59.95.0.45) |
| 11:56.42 | ViZ` | hi folks |
| 11:56.49 | Druken | someone write me an agi script that will do the housework for me :) |
| 11:57.16 | ViZ` | anyone know of a good softphone COM DLL that I can use to make calls with Asterisk? |
| 11:57.49 | Druken | you want to make a softphone? |
| 11:58.01 | ViZ` | I want it to be integrated into my agent app |
| 11:58.14 | ViZ` | so theres no messing about with a third party system |
| 11:58.30 | Druken | good luck :) hehe |
| 11:58.38 | ViZ` | :) |
| 11:58.46 | Druken | i highly doubt there is a drop in dll |
| 11:59.12 | ViZ` | darn, I guess that would just be too easy eh? |
| 11:59.34 | Druken | think about it... if there was, don't ya think there would be a few more softphones out? |
| 11:59.55 | ViZ` | guess so |
| 12:00.05 | Druken | every jackass that can drag and drop would have one |
| 12:01.21 | spiral-dive | hey ppl - anybody heard of an ATA connected phone ringing once every few minutes?? |
| 12:01.46 | spiral-dive | nothing there -just like pranking |
| 12:02.07 | Druken | spiral-dive: check your voicemail |
| 12:03.14 | spiral-dive | I thought it might be connected with mailbox - so I disabled that - but it still rings - I have no messages |
| 12:03.42 | spiral-dive | any other ideas? |
| 12:04.12 | Druken | what ata is it? |
| 12:04.23 | spiral-dive | sipura 2000 |
| 12:04.54 | Druken | if you disconnect it from the server, pull the rj45, does it still ring? |
| 12:05.27 | spiral-dive | hang on a mo |
| 12:07.37 | spiral-dive | doesnt seem to be playing up - so it is coming from asterisk - but even with -vvvvr it does not indicate anything |
| 12:09.23 | Druken | try turning on sip debug |
| 12:09.33 | Druken | it may shed some light on your problem |
| 12:20.38 | *** join/#asterisk pino (~z@host39-28.pool21345.interbusiness.it) |
| 12:21.13 | pino | does anyone know how to get inband progress information when dialing out from a Zap PRI/BRI channel? |
| 12:31.10 | bjohnson | every few minutes or every 60 minutes? |
| 12:33.07 | bjohnson | a few of us are wondering if that's from the SPA using a dynamic IP. Rebooting the SPA will fix it until the next time, but try restarting your dhcpd or setting the SPA to a static IP and monitor and report |
| 12:48.50 | *** join/#asterisk r0d3nt (~RatMan@wsip-24-234-241-84.lv.lv.cox.net) |
| 12:54.59 | *** join/#asterisk ManxPower (~eric@stirprop-s0-0-0-26.ndcr2.datasync.net) |
| 12:59.24 | *** join/#asterisk ManxPower (~eric@stirprop-S0-0-0-26.ndcr2.datasync.net) |
| 13:01.06 | *** join/#asterisk julianjm (~julianjm@250.Red-80-59-67.pooles.rima-tde.net) |
| 13:06.49 | *** join/#asterisk Berkey (mikeberkey@ip70-180-160-35.lv.lv.cox.net) |
| 13:10.56 | *** join/#asterisk kimc (~freenode@pcp09643046pcs.wbrmfd01.mi.comcast.net) |
| 13:12.49 | kimc | hello asterisk - anybody around? |
| 13:13.54 | pino | let's change question and see if anyone can give me a hint |
| 13:14.08 | pino | I'm dialing out from a SIP channel to a Zap channel on a BRI. |
| 13:14.37 | pino | if the SIP channel is already up - for instance, because I've artificially gone through a DISA app - then I get inband progress all right. |
| 13:15.02 | pino | if the SIP channel is not already up, I hear the phone's ringback instead of the inband progress info coming from the network. |
| 13:15.12 | pino | Is there a simple way to fix this? |
| 13:17.00 | kimc | So if the SIP channel is not already up you dial out with a leading '9' + 7 or 10 digits ? |
| 13:17.27 | pino | kimc: no, I'm in Europe (Italy) and the numbering plan is different. |
| 13:17.47 | kimc | Ok but thats the process right ? |
| 13:17.47 | pino | The problem is that some special services offered by the network do not connect the call immediately... |
| 13:18.09 | pino | well, yes, I dial out with a leading '0' to get into the "PSTN" context, then three digits. |
| 13:18.51 | kimc | And when it connects after the 3 digits you want to hear call progress at this point? |
| 13:19.25 | pino | these services welcome you with a menu during the "progress" phase of the call, so I'm trying to convince * to (1) pass me the inband progress info even if the channel in the progress state and not in the up state, and (2) pass the DTMF to the network even though the channel is not in the up state. |
| 13:19.28 | pino | kimc: yes, exactly. |
| 13:20.30 | kimc | Hmm.. my outbound context is: |
| 13:20.45 | kimc | [local] |
| 13:20.52 | kimc | exten => _9NXXNXXXXXX,1,Dial(${TRUNK}/w${EXTEN:1}) |
| 13:21.00 | kimc | exten => _9NXXNXXXXXX,2,Congestion |
| 13:21.14 | kimc | So is yours similar to this ? |
| 13:21.46 | kimc | Oh and: |
| 13:21.49 | kimc | TRUNK=Zap/4 |
| 13:22.05 | pino | yes, except that i don't have "w" |
| 13:22.45 | pino | (are you running head? I'm running 1.0.7 and I don't have "w" in "show application dial") |
| 13:22.48 | kimc | Right, the 'w' causes a 'wait' for the pstn to come ready |
| 13:23.13 | kimc | Otherwise it the leading digit will usually not be read |
| 13:23.26 | pino | well, I've solved the problem by putting Answer before Dial :) |
| 13:23.54 | kimc | Hmm.. could that be the problem? |
| 13:24.01 | pino | this fscks up the CDR records though :( |
| 13:24.09 | kimc | ahh.. |
| 13:24.32 | pino | and does not solve the DTMF problem ... hmmmmmm |
| 13:24.44 | pino | this second part could just be related to my ignorance in configuring SIP |
| 13:25.47 | kimc | Do you have dtmfmode= set in sip.conf ? |
| 13:26.50 | kimc | How about: |
| 13:26.53 | kimc | canreinvite=no ; allow RTP voice traffic to bypass Asterisk |
| 13:27.19 | pino | well, I have out-of-band dtmf and they work when the channel is up :) |
| 13:27.38 | pino | actually I'm wondering if this special service is in any way whatsoever conforming to the specs... |
| 13:28.01 | pino | they have two "twin" services with the same menus, the same background music, and so on; one is for residential customers and one is for business customers. |
| 13:28.21 | kimc | Ah Ok, our situations are different as I'm just using a POTS line so DTMF is in-band |
| 13:28.22 | pino | the residential one answers the call right away, the business one does not and stays in the PROCEEDING state |
| 13:28.35 | kimc | right |
| 13:28.50 | pino | I couldn't benefit from canreinvite, because * is my gateway to the PSTN :) |
| 13:29.08 | kimc | yes |
| 13:29.25 | *** join/#asterisk The_Duke (~the_duke@ppp-125-34.adsl.restena.lu) |
| 13:29.27 | kimc | So your BRI is what we would call ISDN? |
| 13:29.36 | The_Duke | Hello, |
| 13:29.39 | kimc | hello |
| 13:29.58 | pino | kimc: yes, it's the 2-channel interface to the ISDN! |
| 13:29.59 | The_Duke | is someone here from UK, who could help me test/debug a UK tollfree number??? |
| 13:30.30 | kimc | No takers so far Duke.. |
| 13:31.32 | kimc | I would like to have BRI but I don't think there are any interface cards for US standards |
| 13:31.38 | kimc | at low prices |
| 13:33.10 | kimc | Maybe the lack of BRI here makes for less development |
| 13:33.28 | Druken | pino: actually bri is 3 channels |
| 13:33.42 | kimc | 2B + D ? |
| 13:33.44 | *** join/#asterisk JunK-Y (~junky@modemcable174.107-81-70.mc.videotron.ca) |
| 13:33.47 | Druken | yeah |
| 13:35.12 | kimc | I have a zaptel question: When I dial out, on the console I see: DIAL Twxxxxxxxxxxw |
| 13:35.32 | pino | Druken: it is |
| 13:35.34 | kimc | I cause the leading 'w' but is this normal for the trailing one ? |
| 13:36.28 | pino | kimc: there are, but they are expensive, I guess... |
| 13:36.43 | kimc | pino: This is what I've heard |
| 13:38.17 | pino | kimc: thank you a lot for your help |
| 13:38.31 | pino | i think i'll give up taming * for this afternoon :) |
| 13:38.45 | kimc | Very good |
| 13:39.34 | pino | bye! |
| 13:43.17 | kimc | Druken - Are you still around? |
| 13:44.44 | *** join/#asterisk gres (~serg@81.222.48.242) |
| 13:47.30 | kimc | Anyone running * on BSD ? |
| 13:47.39 | inetdcrsh | i'm around |
| 13:48.33 | kimc | hello inetdcrsh: Did you notice my earlier question about the DIAL logging to the console? |
| 13:48.40 | inetdcrsh | yeah |
| 13:48.59 | kimc | Any thoughts on the trailing 'w' ? |
| 13:49.11 | inetdcrsh | error in your dialplan somewhere |
| 13:49.18 | kimc | Ok |
| 13:49.23 | inetdcrsh | <PROTECTED> |
| 13:49.28 | inetdcrsh | that's what i get when i call something |
| 13:49.52 | JunK-Y | inetdcrsh: whats wrong? |
| 13:49.54 | inetdcrsh | you've got a typo in your dialplan somewhere |
| 13:50.06 | inetdcrsh | nothing.. i was showing kimc what i get in con when i dial |
| 13:50.25 | JunK-Y | that makes sense :) |
| 13:50.35 | inetdcrsh | well.. nothing with my zaptel anyway |
| 13:50.46 | inetdcrsh | i'm trying to switch to sip service, and i'm having a bastard of a time with that |
| 13:50.46 | kimc | I get: |
| 13:50.57 | kimc | Executing Dial("SIP/303-f04d", "Zap/4/wxxxxxxxxxx") in new stack |
| 13:51.21 | inetdcrsh | ok.. then that W is in your Dial line for zaptel |
| 13:51.25 | kimc | Doesn't have a trailing 'w' on the cli |
| 13:51.35 | inetdcrsh | what is the w for? |
| 13:52.20 | kimc | The leading w is needed or the telco frequently misses the first dtmf digit |
| 13:52.31 | inetdcrsh | lol |
| 13:52.34 | inetdcrsh | junk telco |
| 13:52.40 | inetdcrsh | what country? |
| 13:52.51 | kimc | Michigan, USA :) |
| 13:52.56 | inetdcrsh | lol |
| 13:53.01 | inetdcrsh | qwest then |
| 13:53.04 | kimc | SBC |
| 13:53.08 | inetdcrsh | even worse |
| 13:53.14 | kimc | On a slic |
| 13:53.15 | inetdcrsh | VA here.. good ole' verizon |
| 13:53.48 | kimc | Beat my head against the wall for days trying to lower the zap card tx level etc.. |
| 13:54.03 | inetdcrsh | fyi, i've had nothing but trouble with the zap cards |
| 13:54.04 | kimc | Then it finally dawned on me what was happening |
| 13:54.11 | kimc | really |
| 13:54.16 | inetdcrsh | yeah |
| 13:54.19 | inetdcrsh | they're pretty much crap |
| 13:54.44 | inetdcrsh | even when you get them tuned well |
| 13:54.46 | inetdcrsh | audio quality sucks |
| 13:54.52 | kimc | I had an echo problem for a while but now have that fixed |
| 13:55.05 | inetdcrsh | yeah.. but the quality still isn't that good |
| 13:55.14 | kimc | The docs say that echocancel is default to 'on' but not here.. |
| 13:55.14 | inetdcrsh | impossible to get the volumes right |
| 13:55.28 | inetdcrsh | there are no docs |
| 13:55.40 | inetdcrsh | that's the other part of the problem |
| 13:55.45 | inetdcrsh | there is no good documentation for * |
| 13:55.55 | kimc | I just set the RX to 3.0 this morning for a little higher caller level |
| 13:56.05 | inetdcrsh | if you want to get something working, plan to spend a week or two tinkering |
| 13:56.07 | kimc | Know what you mean about the docs, thats for sure |
| 13:56.26 | inetdcrsh | and of course, digium doesn't help |
| 13:56.31 | inetdcrsh | i spent thousands on their cards |
| 13:56.38 | kimc | I even purchased that 'e-book' |
| 13:56.40 | inetdcrsh | but, heaven forbid they help me with the config |
| 13:56.50 | inetdcrsh | gotta send them $500 to get their assistance |
| 13:57.04 | kimc | Is that where support $ starts ? |
| 13:57.19 | inetdcrsh | honsetly, i'm not even sure |
| 13:57.30 | inetdcrsh | i just got annoyed and hung up on the guy |
| 13:57.35 | kimc | heh |
| 13:57.39 | inetdcrsh | the problem i was having.. |
| 13:57.43 | inetdcrsh | every 4 hours or so |
| 13:57.50 | inetdcrsh | all of my zap cards would lock up |
| 13:57.56 | inetdcrsh | hang offhook |
| 13:58.02 | kimc | I better sign off and go help a friend down the road by fixing his PC |
| 13:58.05 | inetdcrsh | no outbound, no inbound.. nothing |
| 13:58.14 | kimc | How did you fix it ? |
| 13:58.23 | inetdcrsh | honestly.. i haven't |
| 13:58.33 | kimc | wow.. thats bad |
| 13:58.34 | inetdcrsh | busydetect=yes |
| 13:58.34 | inetdcrsh | busycount=8 |
| 13:58.45 | inetdcrsh | that's gotten it to the point where it only happens about once every week or so |
| 13:59.02 | inetdcrsh | so, i just threw a script in cron to reset ast, and reload the zap drivers every night |
| 13:59.08 | inetdcrsh | that mitigates the problem |
| 13:59.17 | inetdcrsh | but, i'm migrating away frmo the zap cards |
| 13:59.19 | Berkey | You guys have any strong opinions on cisco phones for use as sip handsets? Is it worth the update hassle? |
| 13:59.30 | inetdcrsh | berkey: nope, it's not |
| 13:59.36 | inetdcrsh | get snom or polycom phones |
| 13:59.47 | inetdcrsh | you can get new ones for the same price you buy used ciscos for |
| 14:00.45 | Berkey | Cisco is kinda scary. Quality harware, but they allways want to go around inventing "better" protocals! |
| 14:01.03 | kimc | BRB |
| 14:01.07 | inetdcrsh | amen to that berkey |
| 14:01.14 | Berkey | he he |
| 14:01.27 | Nugget | just like digium invented IAX? It's not too hard to come up with something better than SIP. |
| 14:01.50 | inetdcrsh | the difference is that iax isn't required for * |
| 14:02.03 | inetdcrsh | legally, if you buy a cisco phone without sip support |
| 14:02.07 | inetdcrsh | you have to BUY the sip support for it |
| 14:02.12 | Nugget | and neither is SCCP required to use a 79x0 phone. |
| 14:02.12 | inetdcrsh | you can't just load the image |
| 14:02.33 | Berkey | Well the cisco thing wouldn't be a big deal but they make you pay to use open standards! |
| 14:02.38 | Nugget | you're supposed to buy support for the phone no matter which image you use. |
| 14:02.40 | inetdcrsh | exactly |
| 14:02.43 | Nugget | SIP doesn't cost extra |
| 14:03.01 | inetdcrsh | that's typical cisco mantra.. buy support for everything |
| 14:03.06 | Berkey | It does to flash the handset though right? |
| 14:03.18 | inetdcrsh | i went with an ip phone system and asterisk because i wanted to SAVE money |
| 14:03.19 | Nugget | hey -- if you want their software they expect you to pay the software license. I don't see what's unfair about that. |
| 14:03.26 | inetdcrsh | it's not unfair |
| 14:03.27 | Nugget | SIP doesn't cost more, that's just incorrect. |
| 14:03.38 | Berkey | I don't want their software! |
| 14:03.51 | inetdcrsh | it's not unfair.. it's just the reason i didn't buy cisco phones |
| 14:03.53 | Nugget | so buy a phone without firmware and start coding. |
| 14:03.59 | *** join/#asterisk djin (~djin@gridfox.xs4all.nl) |
| 14:04.07 | Nugget | sounds like a waste of energy to me |
| 14:04.10 | Berkey | O I C what you are getting at. |
| 14:06.02 | inetdcrsh | or just buy a phone that supports the open standard and be done with it |
| 14:06.10 | Nugget | I did. I bought a 7960. |
| 14:06.40 | Nugget | it's exactly as open as any other sip phone on the market. |
| 14:08.28 | inetdcrsh | except that you had to either buy the maint. |
| 14:08.39 | Nugget | that's part of buying a cisco phone. |
| 14:08.47 | Nugget | it costs exactly the same no matter which firmware you use. |
| 14:08.51 | inetdcrsh | that's part of buying anything cisco |
| 14:09.06 | Nugget | you seem to be insisting that cisco charges extra for the SIP image. They don't. |
| 14:09.17 | inetdcrsh | no.. i'm insisting that you have to pay cisco to get it |
| 14:09.27 | Nugget | you have to pay cisco to get the phone, yes. |
| 14:09.31 | Berkey | I just have this grand Idea that cisco could be a hardware company. Make more of their docs and software available free. Then people would buy all their hardware. |
| 14:09.35 | *** part/#asterisk JunK-Y (~junky@modemcable174.107-81-70.mc.videotron.ca) |
| 14:09.37 | Berkey | But that is a dream. |
| 14:09.48 | inetdcrsh | well, if you've got a cco account.. that's basically how it works |
| 14:10.07 | inetdcrsh | you just have to have a maint. contract to get one |
| 14:10.15 | Berkey | Not realy. Ever try to get much support for a PIX? |
| 14:10.27 | inetdcrsh | oh yes |
| 14:10.33 | inetdcrsh | i'm a "retired" ccie |
| 14:10.43 | *** join/#asterisk ALD (~allendufa@c-66-41-198-191.hsd1.mn.comcast.net) |
| 14:11.05 | Berkey | That test is a bitch I hear. |
| 14:11.16 | inetdcrsh | wouldn't know.. i haven't taken one in years |
| 14:11.20 | inetdcrsh | i'm off the cisco bandwagon now |
| 14:11.40 | Berkey | I heard they do things like bend one of your serial pins when you leave the hardware lab. |
| 14:12.15 | Berkey | he he sneaky way to make sure you know trouble shooting methodology. |
| 14:12.19 | inetdcrsh | now that's just cold |
| 14:12.39 | inetdcrsh | they did give me a bad patch cable once |
| 14:12.45 | *** join/#asterisk manoj_ (~manoj@202.88.237.63) |
| 14:12.55 | Berkey | Well that is all just rummor and inuendo |
| 14:12.56 | manoj_ | what is balance-sheet crisis |
| 14:12.58 | Berkey | he he |
| 14:13.06 | inetdcrsh | never had a bent serial connector though |
| 14:13.17 | manoj_ | any idea |
| 14:13.28 | Berkey | Well was the patch cable an accident? |
| 14:13.30 | inetdcrsh | balance-sheet crisis? |
| 14:13.36 | inetdcrsh | i don't know.. it might have been planned |
| 14:25.58 | *** join/#asterisk Berkey (mikeberkey@ip70-180-160-35.lv.lv.cox.net) |
| 14:33.14 | *** join/#asterisk _SMP_ (~SMP@pandora.burned.net) |
| 14:41.55 | *** join/#asterisk fabioFVZ (~fabio@213-92-104-168.f5.ngi.it) |
| 14:47.55 | *** join/#asterisk pooh_ (user78@cust.15.241.adsl.cistron.nl) |
| 14:48.26 | pooh_ | Anybody know why I can not 'terminate' a number with # in the DISA app pls? |
| 14:49.17 | pooh_ | I _have_ to wait for the timeout of DISA, even DigitTimeOut and ResponseTimeOut do not wrk with DISA |
| 14:49.28 | inetdcrsh | sorry, i know nothing about disa |
| 14:49.39 | pooh_ | me neither, but learning ;-) |
| 14:50.27 | newl | bah this is driving me nuts. GS101->*->FWD then FWD->KIAX is fine. KIAX->FWD->*->GS101 doesn't work. I get no iax2 traffic beyond the normal poke/pong/ack even when using the Call Me app they provide. |
| 14:51.01 | *** join/#asterisk tekjacob_ (~myself@70-32-21-41.frdrmd.adelphia.net) |
| 14:51.41 | newl | ethereal reflects the same traffic. |
| 14:51.45 | jake | could I create a RedHat 7.2 install - compile all dependencies for asterisk - then copy the /usr/lib and /usr/bin to a different RedHat 7.2 machine and have it work - or are their additional steps? |
| 14:51.54 | pooh_ | newl: gimme a call on FWD 398137, it is IAX terminated |
| 14:52.11 | pooh_ | jake: should work |
| 14:52.18 | tekjacob_ | Hey all, I know this in a FOP channel but I need some help... I have an asterisk system w/ a PRI. I want the receptionist to be able to take a call and drag it over to a "speed dial" button to transfer it out to someones cell phone. Anyone have any idea how to set that up? |
| 14:52.31 | jake | tnx pooh_ |
| 14:52.41 | pooh_ | jake: dev machine, prod machine |
| 14:53.00 | pooh_ | tekjacob: FOP channel? |
| 14:53.01 | jake | I can't comile on the final target machine |
| 14:53.12 | pooh_ | jake: wise, very wise :-) |
| 14:53.16 | *** join/#asterisk PatrickDK (patrickdk@dyn-19-218.myactv.net) |
| 14:53.23 | tekjacob_ | pooh_ Flash Operator Panel |
| 14:53.30 | jake | so - my thinking was compile on a seperate installation |
| 14:53.34 | pooh_ | tekjacob: this is * channel |
| 14:53.42 | pooh_ | jake: good idea |
| 14:53.45 | jake | tnx |
| 14:54.02 | tekjacob_ | pooh_ mis-typed should have been "this is NOT an FOP channel" |
| 14:54.09 | pooh_ | jake: just make sure your RH7.2 is up to date ;-) |
| 14:54.09 | newl | pooh_: outgoing is fine. I just can't seem to get any incoming traffic _through_ (or _to_ for that matter) asterisk from fwd. As mentioned, if I remove asterisk from the equation and have kiax connected directly, incoming calls work fine. |
| 14:54.19 | jake | pooh_ - am i missing any folders besides - /usr/lib and /usr/bin? |
| 14:54.20 | pooh_ | tekjacob: :D |
| 14:54.36 | pooh_ | jake: yes a lot of them |
| 14:54.48 | jake | k |
| 14:55.29 | pooh_ | jake: unless you have the * db and /etc/init.d/ stuff and voicemail/sounds stuffalread |
| 14:55.44 | jake | oh |
| 14:55.50 | pooh_ | jake: take a look at a random asterisk RPM to see what you need |
| 14:56.05 | jake | great - that's what I was looking for - tnx |
| 14:56.23 | pooh_ | jake: and ofcourse your /etc/asterisk dir/dialplan ;-) |
| 14:56.28 | jake | right |
| 14:56.29 | jake | :) |
| 14:56.35 | jake | i got that |
| 14:56.52 | jake | just talking about the executable/lib stuff |
| 14:57.00 | pooh_ | Anybody created a dialplan with seperate plans for diffrent departments ? |
| 14:57.03 | pooh_ | Jake: ah ok |
| 14:57.32 | pooh_ | jake: do not forget /etc/usr/sbin |
| 14:57.37 | jake | ok |
| 14:58.09 | pooh_ | jake: /usr/sbin that is, sorry |
| 14:58.20 | jake | tnx pooh... |
| 14:58.33 | pooh_ | jake: np |
| 14:58.49 | The_Duke | is someone here from UK, who could help me test/debug a UK tollfree number??? |
| 15:00.14 | *** join/#asterisk The_Duke2 (~the_duke@ppp-125-34.adsl.restena.lu) |
| 15:00.15 | *** join/#asterisk arbius (~arbius@c-67-173-45-34.hsd1.il.comcast.net) |
| 15:02.20 | PatrickDK | pooh, seperate plans for different departments is the whole point of pbx |
| 15:02.28 | PatrickDK | heh, in asterisk they are call contexts |
| 15:02.49 | PatrickDK | everyone should have atleast two different ones setup, one for incoming calls, and one for outgoing |
| 15:06.12 | *** join/#asterisk iq (~IQ@63-230-47-233.omah.qwest.net) |
| 15:07.18 | inetdcrsh | ok.. i'm about to pull my hair out again |
| 15:07.27 | inetdcrsh | i'm trying to get asterisk to work as a sip client |
| 15:07.27 | pooh_ | PatrickDK: thx, I understand that, I am talking about completely sperate dialplans in different directories with gateway contexts for interconnecting based on authority. Meaning 1 asterisk server many different companies |
| 15:07.46 | inetdcrsh | i can either get incoming calls to work |
| 15:07.50 | inetdcrsh | or i can get outgoing |
| 15:07.55 | inetdcrsh | but i can't for the life of me get both |
| 15:08.36 | PatrickDK | pooh, like I said, THAT is the WHOLE point |
| 15:08.55 | PatrickDK | who said it was limited to one incoming and one outgoing |
| 15:09.07 | PatrickDK | I am currently using 6 different incoming plans |
| 15:09.11 | PatrickDK | and 4 outgoing plans |
| 15:09.14 | PatrickDK | each is seperate |
| 15:09.18 | pooh_ | PatrickDK: DO you know of an exampe (URL?) |
| 15:09.26 | PatrickDK | example? |
| 15:09.36 | PatrickDK | it's no different from any you conig you will see |
| 15:09.47 | PatrickDK | pooh, you must really not be thinking |
| 15:09.48 | *** join/#asterisk Rez (lorez@lorez.staff.freenode) |
| 15:10.10 | pooh_ | PatrickDK: I have a seperate dir in /etc/asterisk for every company |
| 15:10.25 | PatrickDK | then you just need to inlude them all into the main one |
| 15:10.31 | pooh_ | yes |
| 15:10.48 | PatrickDK | pooh, you have to make sure every company uses different [names] for it's contexts |
| 15:10.57 | pooh_ | yup, did that |
| 15:11.02 | PatrickDK | and link each sip/zaptel/h323/iax user to their context |
| 15:11.07 | pooh_ | PatrickDK: YFYI it is working |
| 15:11.15 | pooh_ | PatrickDK: yup |
| 15:11.37 | PatrickDK | I still don't see how that is more complex than a normal incoming/outgoing setup? |
| 15:12.10 | pooh_ | PatrickDK: I seperated dialplans, macro's, fucntionality, providers, trunks etc |
| 15:12.24 | pooh_ | PatrickDK: For each department/company |
| 15:15.00 | inetdcrsh | anytime i try to call into the system, i get a SIP/2.0 407 Proxy Authentication Required |
| 15:15.12 | inetdcrsh | why is * expecting the remote end to proxy auth? |
| 15:15.57 | inetdcrsh | i' |
| 15:16.02 | inetdcrsh | i'm registered to them |
| 15:17.34 | *** join/#asterisk PatrickDK (patrickdk@dyn-19-218.myactv.net) |
| 15:18.01 | inetdcrsh | does anyone here have asterisk set up as a sip client? |
| 15:18.54 | PatrickDK | hmm, ya, anyone that uses sip |
| 15:19.43 | inetdcrsh | ok.. why does asterisk want a proxy auth from the remote end? |
| 15:19.55 | inetdcrsh | i'm registering with a sip server |
| 15:20.03 | inetdcrsh | when i call the number there from my cell |
| 15:20.11 | inetdcrsh | i get sent immediately the their voicemail |
| 15:20.14 | inetdcrsh | with sip debug on |
| 15:20.22 | inetdcrsh | asterisk shows SIP/2.0 407 Proxy Authentication Required |
| 15:20.35 | inetdcrsh | but, i can call out, and sip show registry shows me registered with them |
| 15:20.44 | inetdcrsh | so, i have to assume that asterisk is looking for the proxy auth |
| 15:20.45 | PatrickDK | you have insecure=very |
| 15:21.03 | inetdcrsh | ? |
| 15:21.20 | PatrickDK | I guess not |
| 15:21.29 | inetdcrsh | is that an option i can set somewhere? |
| 15:21.33 | PatrickDK | yep |
| 15:21.36 | PatrickDK | in sip.conf |
| 15:21.57 | inetdcrsh | haha.. i just wiki'd that |
| 15:22.15 | *** join/#asterisk convey (~van@208-216-127-234.cust.gti.net) |
| 15:22.30 | *** join/#asterisk dizzydiffi (~diseyi@adsl-70-240-211-145.dsl.hstntx.swbell.net) |
| 15:22.39 | inetdcrsh | bam.. fixed |
| 15:22.51 | dizzydiffi | i am the greatest |
| 15:22.55 | inetdcrsh | i've spent 2 days spewing out every obscenity i could think of |
| 15:23.02 | newl | Ali! |
| 15:23.26 | inetdcrsh | damned vonage initiates calls from a different FROM: then the one i'm logging into |
| 15:23.43 | dizzydiffi | any one using alepo |
| 15:24.32 | PatrickDK | inetdcrsh, no, all that does is allow any port to connect to you |
| 15:24.39 | PatrickDK | they randomly select outgoing port |
| 15:24.45 | PatrickDK | instead of keeping it fixed |
| 15:24.56 | inetdcrsh | from the wiki "allow registered hosts to call without re-authenticating" |
| 15:25.05 | inetdcrsh | either way.. that fixed it |
| 15:25.23 | inetdcrsh | happy days are here again |
| 15:29.34 | *** join/#asterisk cmk (~cmk_@p54A3BFAF.dip.t-dialin.net) |
| 15:31.10 | *** join/#asterisk fcgreco (~fcgreco@200.245.73.163) |
| 15:32.14 | convey | anyone have an example of Zaptel.conf and Zapata.conf for RobbedBit esf b8zs. |
| 15:32.25 | convey | T1's |
| 15:35.34 | inetdcrsh | only robbed bit i've ever known was when somebody stole my powerdrill |
| 15:35.52 | convey | lol |
| 15:36.19 | inetdcrsh | in all seriousness.. what is robbedbit? |
| 15:37.08 | *** join/#asterisk fcgreco (~fcgreco@200.245.73.163) |
| 15:37.08 | convey | it is a digital trunk, non-pri |
| 15:37.17 | convey | sometimes called a local T1 |
| 15:37.24 | inetdcrsh | ok.. i'll have to add that to my buzzword list |
| 15:37.29 | convey | lol |
| 15:37.29 | inetdcrsh | ahh.. all b-channels |
| 15:37.33 | convey | yup |
| 15:39.44 | *** join/#asterisk fugitivo (~ajf@201.255.99.14) |
| 15:42.35 | *** join/#asterisk inetdcrsh (~inetdcrsh@static-70-105-62-122.rich.east.verizon.net) |
| 15:42.41 | inetdcrsh | ok.. back to your t1\ |
| 15:42.50 | inetdcrsh | i've never configured one of those with asterisk |
| 15:42.54 | inetdcrsh | but, i'm willing to give it a shot |
| 15:44.00 | inetdcrsh | :-p |
| 15:44.08 | jake | i have one working with robbed bit, what are you hooking it to? |
| 15:44.53 | fcgreco | hi folks! I need an information. I have an TDM04B interface setup for analog lines, now I want setup my mobile card interface. Can anyone tell me if it´s works as fxs or fxo mdoule? |
| 15:45.06 | file | mobile card interface? |
| 15:45.16 | jake | ok |
| 15:45.26 | jake | i'll pastebin what I have and you can try it |
| 15:45.37 | jake | one sec |
| 15:48.52 | fcgreco | I have a mobile phone. I can connect this mobile phone in one interface card. This interface card has a r11 connection and I would like connect it in a Digium card. I tried to connect on the TDM04B, but I not sure it this interface is fxs or fxo. |
| 15:50.49 | jake | convey: http://pastebin.ca/10142 |
| 15:51.13 | *** join/#asterisk Nix (~Nix@81.213.125.220) |
| 15:51.57 | jake | convey: i have two TE110P cards |
| 15:52.02 | *** join/#asterisk Veto (mdkuser@cpe-66-69-38-192.satx.res.rr.com) |
| 15:53.26 | *** join/#asterisk loko (rbrown@67.171.78.22) |
| 15:53.38 | loko | Who do you guys recommend for pay per minute DIDs |
| 15:57.53 | jake | loko - i've found that all the providers seem to have mixed results... A lot depends on what your path to them looks like |
| 15:58.06 | loko | yea |
| 15:58.12 | loko | I just want one that is stable and does f' up |
| 15:58.16 | loko | livevoip f'in blows |
| 15:58.40 | loko | sixtel is down for hours at a time (the DIDs are, not their service) and they dont pass caller id info correctly |
| 15:58.44 | jake | i have iax.cc and nufone |
| 15:58.54 | loko | i use nufone for my 800 numbers and like them |
| 15:59.10 | loko | I use iax.cc / sixtel for local DIDs - but my DIDs are down all the time with them |
| 15:59.29 | jake | there is also voipjet and iaxtel.com |
| 15:59.46 | jake | i have had better luck with iax.cc |
| 16:00.02 | convey | inetdcrsh: you still around? |
| 16:00.19 | inetdcrsh | yeah |
| 16:00.20 | jake | convey - did that config i send you work? |
| 16:01.00 | convey | jake: I just got back. Lemme look. |
| 16:02.19 | iq | hi, I've multiple mp3 in the musiconhold folder. Can I force * to always use the one I want instead of using them in series? |
| 16:03.22 | *** join/#asterisk lters (~lters@mrtc-mm-600046.mis.net) |
| 16:03.24 | *** join/#asterisk zen-froglet (~zen@starlight.chat.za.net) |
| 16:03.34 | zen-froglet | evening. |
| 16:03.42 | iq | morning |
| 16:03.48 | zen-froglet | heh. |
| 16:03.55 | iq | :) |
| 16:04.01 | jake | iq - according to this - you can - http://www.voip-info.org/wiki-Asterisk+config+musiconhold.conf |
| 16:04.01 | zen-froglet | anyone tried Asterisk on SuSE9.3 yet ? |
| 16:04.14 | *** join/#asterisk dalabera (~dalabera@adsl-146-35-91.mia.bellsouth.net) |
| 16:04.38 | zen-froglet | and is it possible to get the OctoBri card working in the 2.6 Kernels ? |
| 16:04.40 | convey | jake: your T1's are working with this signalling? fxs_ks |
| 16:05.27 | jake | yes |
| 16:05.34 | jake | in production now |
| 16:06.17 | ManxPower | Does anyone have a voicemail notification script that uses externnotify=? |
| 16:06.30 | iq | jake, I read it earlier. maybe I need to reread :) |
| 16:06.38 | PatrickDK | manxpower, I used too\ |
| 16:06.58 | jake | iq - near the bottm it has some talk of classes - and Tiny Tim |
| 16:07.38 | convey | jake: thanks, I will give it a try. What hardware are you using again? |
| 16:07.53 | iq | jake, thanks :) |
| 16:08.01 | jake | 2 TE110P cards |
| 16:08.05 | jake | iq - np |
| 16:08.21 | convey | jake: think it will work with Sangoma cards? |
| 16:08.38 | jake | i would think so |
| 16:09.37 | convey | jake: excellent! thanks |
| 16:09.44 | jake | np - good luck |
| 16:12.08 | dalabera | maxpower-> what does externotify does? |
| 16:13.19 | *** join/#asterisk ramtha (~tk@td9091901.pool.terralink.de) |
| 16:13.41 | ramtha | is there a working implementation for cdr radius accounting in asterisk? |
| 16:13.57 | *** part/#asterisk fcgreco (~fcgreco@200.245.73.163) |
| 16:13.59 | ramtha | i meen to imagine, that radius ist not working b< default |
| 16:15.13 | *** join/#asterisk mDuff (~cduffy@64.128.31.220) |
| 16:15.16 | JerJer | ramtha: no there are more efficent solutions |
| 16:15.42 | JerJer | if you want radius, use perl to implement a radius client and parse the csv files |
| 16:15.58 | JerJer | if you want a real solution, write a cdr backend |
| 16:17.22 | zen-froglet | and is it possible to get the OctoBri card working in the 2.6 Kernels ? |
| 16:17.38 | ramtha | hmm that sounds good, are there perl scripts in the net right now? i have no experience in perl :) |
| 16:18.29 | JerJer | use google |
| 16:18.29 | *** join/#asterisk WilliamK (~wkeller@c-24-0-130-177.hsd1.tx.comcast.net) |
| 16:18.40 | *** join/#asterisk bah (048830696@AC9D6E86.ipt.aol.com) |
| 16:18.42 | JerJer | this channel is not your personal search engine |
| 16:19.46 | ManxPower | JerJer, You're tired of deflowering all the new Asterisk virgins too? |
| 16:19.56 | zen-froglet | JerJer: perhaps i shoudl re-phrase this question. |
| 16:20.11 | *** join/#asterisk julianjm (~julianjm@250.Red-80-59-67.pooles.rima-tde.net) |
| 16:20.18 | zen-froglet | I have SuSE 9.3 with Asterisk installed. I have installed the OctoBri card, and have Asterisk talking to the card. |
| 16:20.26 | zen-froglet | kernel 2.6.11-20a |
| 16:20.54 | zen-froglet | when i make a call from external source, the system is not answering. |
| 16:21.16 | zen-froglet | from the locals here in South Africa, they claim that the OctoBri card does not work with the 2.6 kernel. |
| 16:22.27 | zen-froglet | i do not know of any means to test the card, but have been told that it works fine with SuSE9.1 |
| 16:22.56 | zen-froglet | looking at SuSE 9.1, the default kernel is 2.6.4-52 |
| 16:23.05 | *** join/#asterisk IPmonger (~ipmonger@pcp0010577106pcs.coatsv01.pa.comcast.net) |
| 16:23.14 | zen-froglet | and if it works on 9.1, howcome it will not work with 9.3 ? |
| 16:23.25 | zen-froglet | or is there no one here that has tested 9.3 ? |
| 16:23.27 | sung | yo |
| 16:23.41 | sung | any comments on the sipuras boxen for faxing? |
| 16:23.43 | *** part/#asterisk IPmonger (~ipmonger@pcp0010577106pcs.coatsv01.pa.comcast.net) |
| 16:23.51 | sung | we're using them a little here and we've noticed it's just not reliable |
| 16:25.20 | zen-froglet | I was under the impression that irc.freenode.net is the place to come and chat when I am unable to solve a problem. Seems I may be mistaken. |
| 16:26.27 | *** part/#asterisk zen-froglet (~zen@starlight.chat.za.net) |
| 16:27.36 | pooh_ | YFYI DISA Timeout is hardcoded, I adjusted the source to get the values I want |
| 16:28.45 | psycodad | can I use an normal ISDN card also as connection for internal ISDN phones only ? |
| 16:29.40 | psycodad | means: asterisk-isdn_card-sbus-ISDN_phones |
| 16:43.05 | convey | Anyone using Sangoma cards? |
| 16:44.08 | tzanger | I have, they work just as well as the digium ones |
| 16:44.46 | *** join/#asterisk criten (~peterh@dsl-202-173-184-65.nsw.westnet.com.au) |
| 16:45.31 | convey | tzanger: do you know how to configure the driver, the wanpipt1.conf file? |
| 16:45.38 | tzanger | there's nothing to configure |
| 16:45.44 | tzanger | read the directions :-) |
| 16:45.50 | tzanger | you did compile with TDM support right? |
| 16:45.55 | convey | tzanger: yes |
| 16:46.02 | *** join/#asterisk Delvar (~irc@83.146.53.34) |
| 16:46.03 | tzanger | then there isn't anything to it |
| 16:46.12 | convey | tzanger: do I have to start the wanrouter service? |
| 16:46.19 | tzanger | of course |
| 16:46.51 | convey | tzanger: it requires the wanpipe.conf file in /etc/wanpipe |
| 16:46.57 | tzanger | yes |
| 16:47.03 | tzanger | the directions tell you how to create one |
| 16:47.27 | convey | tzanger: which one to I use? there are several examples, X25, ppp, etc. |
| 16:47.43 | tzanger | uh, the tdm one if there is one |
| 16:47.53 | convey | tzanger: No TDM example :( |
| 16:47.56 | tzanger | you just use the wancfg util, tell it the card, tell it the specifics of the span and that's it |
| 16:48.12 | convey | tzanger: Ok I will try that. brb |
| 16:48.28 | *** join/#asterisk ALD (~allendufa@c-66-41-198-191.hsd1.mn.comcast.net) |
| 16:48.58 | *** join/#asterisk R-Guy (~ron-mirc@24.87.100.41) |
| 16:58.39 | convey | tzanger: do you need a cont file for every T1 span or can I edit the file manually to include the additional T1's? |
| 16:58.59 | convey | tzanger: cont = conf btw |
| 17:01.25 | *** join/#asterisk jdg (~jdg@CA03F84B.adsl.mana.pf) |
| 17:01.27 | tzanger | convey: uh... I think each span needs to be configured; I've only used one-span cards |
| 17:10.13 | *** join/#asterisk shido6 (~greg@d57-87-253.home.cgocable.net) |
| 17:11.50 | convey | tzanger: I have a 4 span card |
| 17:12.20 | *** join/#asterisk BoRiS (boris@S01060040ca1e5b54.wp.shawcable.net) |
| 17:12.31 | convey | tzanger: It looks as though it wants a config for each span.. dunno.. I tried to cat the configs together with no luck. I did get one working :) |
| 17:14.15 | tzanger | convey: I would have thought one config file would have worked for four spans |
| 17:14.37 | convey | Do you want to look at the config? |
| 17:14.38 | tzanger | I bet you hav eto say wanrouter start wp1 wp2 wp3 wp4 (normally it just starts the first) |
| 17:14.44 | tzanger | where wp1 is whatever name you gave the interface |
| 17:15.01 | convey | that is a possibility |
| 17:15.10 | convey | lemme try that |
| 17:15.46 | *** join/#asterisk omarc55 (~omarc55@adsl-2-68-80.mia.bellsouth.net) |
| 17:16.36 | *** join/#asterisk Ayano (~erik_leee@12-218-103-14.client.mchsi.com) |
| 17:17.03 | *** join/#asterisk loomi (~loomi@24.80-203-115.nextgentel.com) |
| 17:17.28 | omarc55 | Hi all. I am trying to make a call from a ZAP channel to a softphone that uses speex but I get the following on the asterisk console: Unable to find a path from gsm to speex. I have speex installed (it shows up when I do "show codecs"), what am I doing wrong? |
| 17:17.35 | *** join/#asterisk BoRiS (boris@S01060040ca1e5b54.wp.shawcable.net) |
| 17:17.58 | Ayano | Hey everyone. I just set up asterisk@home, and I cant figure out the password for the voicemail when accessing it from the phone. Any help? |
| 17:18.11 | Nugget | it's whatever you set it to in voicemail.conf |
| 17:19.14 | Ayano | Thank you nugget! Also when I put someone on hold it drops after about 15 seconds. Is there a setting for that? |
| 17:19.26 | Nugget | no. it shouldn't be doing that. |
| 17:19.31 | *** join/#asterisk Moc (~mochouina@modemcable165.109-70-69.mc.videotron.ca) |
| 17:19.35 | Nugget | check the console and see what asterisk thinks is happening |
| 17:19.38 | Moc | Hail |
| 17:19.43 | BoRiS | Moc!!! |
| 17:19.44 | mDuff | Nugget, howdy. |
| 17:20.59 | Moc | Hi BoRiS |
| 17:21.15 | mDuff | omarc55, run "show translation". Does the speex line have numbers in it, or just dashes? |
| 17:21.36 | Ayano | Thank you. So in voicemail.conf it has the individual settings for each mail box? |
| 17:22.35 | Nugget | it should be pretty obvious once you look at the file. |
| 17:22.55 | Ayano | Ok, I'll check it out. I'm greatfull. Thanks. |
| 17:24.22 | omarc55 | mDuff: just dashes |
| 17:25.58 | mDuff | omarc55, that's pretty much what I was expecting. "show codecs" is a little unintuitive -- it shows codecs that aren't available; you'll notice it does the same thing with g723, for instance, even if you don't have a license and a copy of that installed. |
| 17:26.21 | convey | anyone know how to enable mutliple spans on a quad T1 sangoma card? |
| 17:26.41 | mDuff | omarc55, the Asterisk makefile looks for speex headers in a limited number of places at build-time and decides whether to include speex support based on whether they're found. |
| 17:26.58 | mDuff | omarc55, it's possible that either the headers weren't installed when your copy of asterisk was built, or they were installed in a different place. |
| 17:27.07 | omarc55 | mDuff: ah I see so I must've done something wrong with speex, I'll check it out. thanks. |
| 17:27.44 | mDuff | (personally, I think that aspect of the build system is braindead, btw -- makes much more sense to have the user specify what they want and complain if it's not found rather than include everything there's headers for and silently fail to include what isn't found). |
| 17:28.06 | *** join/#asterisk xlyz (~xl@213-140-17-96.fastres.net) |
| 17:28.11 | *** part/#asterisk xlyz (~xl@213-140-17-96.fastres.net) |
| 17:28.48 | omarc55 | yeah, cause I didn't notice any warning or anything so I assumed it was installed, especially since I saw it with show codecs |
| 17:29.53 | lters | the same thing happens with support for cdr_pgsql.so |
| 17:30.44 | lters | even if the postgresql dev headers are there, it only looks for them in /usr/include/pgsql and debian installs them in /usr/include/postgresql |
| 17:31.39 | BoRiS | just add a symlink :) |
| 17:31.51 | *** join/#asterisk Himeko (~himeko@S01060040ca128fc3.ed.shawcable.net) |
| 17:32.00 | lters | yeah, but why not make it look there too. |
| 17:32.01 | BoRiS | ln -sf /usr/include/postgresql /usr/include/pgsql |
| 17:33.00 | lters | compiling is or should not be for everyone |
| 17:33.16 | lters | I wish you could apt-get cvs head compile :) |
| 17:33.21 | lters | compiled. |
| 17:33.30 | *** join/#asterisk TUplink (~Tommy@68-232-92-239.chvlva.adelphia.net) |
| 17:34.37 | eKo1 | eh, no. |
| 17:34.38 | BoRiS | Actually, mine compiles file even though I have a /usr/include/postgresql and some files in /usr/include |
| 17:35.03 | BoRiS | file=fine |
| 17:35.48 | eKo1 | Modify the make file if you use locations that * wouldn't expect. |
| 17:37.14 | TUplink | ZT_CHANCONFIG failed on channel 1: Device not configured (6) |
| 17:37.17 | BoRiS | never had to modify any of my make files. :) |
| 17:38.08 | eKo1 | I take it you're not a developer. |
| 17:40.22 | BoRiS | hehe, I am not the one with the problem. :) |
| 17:40.30 | TUplink | do i need to have a /etc/zaptel.conf ? |
| 17:42.18 | TUplink | line 12: Channel 1 already configured as 'FXS Kewlstart' at line 1' |
| 17:44.28 | mDuff | BoRiS, and you use PostgreSQL support? |
| 17:45.49 | *** join/#asterisk R-Guy (~ron-mirc@24.87.100.41) |
| 17:46.00 | BoRiS | I use postgresql with *, yes. :) |
| 17:46.47 | *** part/#asterisk loomi (~loomi@24.80-203-115.nextgentel.com) |
| 17:47.42 | lters | not prob for me either :), just an observation. |
| 17:47.44 | convey | anyone know how to enable mutliple spans on a quad T1 sangoma card? |
| 17:47.57 | PTG1234 | file: wake up |
| 17:48.31 | TUplink | Server# ztcfg |
| 17:48.32 | TUplink | Keyword: [loadzone], Value: [us] |
| 17:48.32 | TUplink | Keyword: [defaultzone], Value: [us] |
| 17:48.32 | TUplink | Keyword: [fxsks], Value: [1] |
| 17:48.32 | TUplink | ZT_CHANCONFIG failed on channel 1: Device not configured (6) |
| 17:48.35 | TUplink | whats that mean |
| 17:50.17 | eKo1 | it means channel 1 is not configured. |
| 17:50.41 | eKo1 | i can't be more redundant. |
| 17:52.04 | TUplink | so how do i configure it |
| 17:52.04 | TUplink | ? |
| 17:52.34 | Himeko | irfanview was always good software |
| 17:53.22 | *** join/#asterisk anachron (~sgnome@ip70-176-146-245.ph.ph.cox.net) |
| 17:53.33 | Himeko | wups |
| 17:53.36 | Himeko | wrong ch |
| 17:53.50 | anachron | can someone help me get music on hold working please? |
| 17:54.18 | anachron | when i try to park a call it says it can't transfer |
| 17:55.38 | lters | anachron, does hold work? |
| 17:55.50 | TUplink | anachron when i installed zapten and ztdummy all of mine started working |
| 17:55.57 | TUplink | zaptel* |
| 17:56.14 | anachron | ok .. lemme install that quick .. brb |
| 17:56.20 | *** join/#asterisk Silik0n (~krice@rso.suspicious.org) |
| 17:57.35 | anachron | zaptel is installed now .. but i can't find the ztdummy module to load it |
| 17:57.50 | *** join/#asterisk Blissex (~Blissex@82-69-39-138.dsl.in-addr.zen.co.uk) |
| 17:57.51 | TUplink | um... |
| 17:57.55 | Qwell | anachron: You have to uncomment it in the makefile |
| 17:57.58 | TUplink | what os? |
| 17:58.03 | anachron | rh9 |
| 17:58.06 | *** join/#asterisk my007ms (~msm@62.139.88.97) |
| 17:58.12 | TUplink | modprobe ztdummy |
| 17:58.17 | anachron | i installed it via rpm |
| 17:58.28 | TUplink | im n freebsd and didnt have to uncomment it |
| 17:58.31 | anachron | when i use modprobe ztdummy it says it can't find it |
| 17:58.37 | TUplink | ok. |
| 17:58.39 | TUplink | so find it |
| 17:58.54 | Qwell | eww, packages are no good with asterisk |
| 17:59.06 | anachron | ztdummy.so? |
| 17:59.19 | TUplink | Qwell i need zaptel help |
| 18:00.40 | Qwell | Don't message me |
| 18:00.54 | TUplink | well poop |
| 18:01.45 | my007ms | HI all |
| 18:02.32 | anachron | i can't seem to find anything related to ztdummy on this system |
| 18:02.46 | anachron | should i just install zaptel via cvs? |
| 18:02.48 | Qwell | anachron: Don't use the package |
| 18:02.55 | Qwell | for zaptel or asterisk |
| 18:02.57 | TUplink | well find wcfxo |
| 18:03.19 | Qwell | and, you don't need ztdummy for MoH |
| 18:03.20 | Silik0n | just get it from cvs and build it... it doesnt take that long |
| 18:03.24 | anachron | ok |
| 18:03.31 | *** join/#asterisk iq (~iq@63-230-47-233.omah.qwest.net) |
| 18:03.40 | *** join/#asterisk znoG (gs@200.115.216.109) |
| 18:03.42 | anachron | so qwell .. after i edited zapata.conf and musiconhold.conf, what do i have to do to get it to work? |
| 18:03.49 | TUplink | mine is in /usr/loval/lib/zaptel |
| 18:03.51 | Qwell | pastebin your errors |
| 18:03.59 | anachron | pastebin? |
| 18:04.05 | Qwell | ~pastebin |
| 18:04.06 | jbot | pastebin is probably a place to paste your stuff without flooding the channel - try http://pastebin.ca |
| 18:04.35 | TUplink | is "#" a comment isn a sh file? |
| 18:04.38 | TUplink | or ; |
| 18:06.20 | znoG | # |
| 18:06.35 | anachron | http://pastebin.ca/10145 |
| 18:06.49 | file | what an eventful day! |
| 18:06.56 | *** part/#asterisk iq (~iq@63-230-47-233.omah.qwest.net) |
| 18:07.08 | TUplink | if i have a FXO i need to have fxs.ko loaded rite |
| 18:07.19 | *** join/#asterisk tangel (tangel@64.135.81.8) |
| 18:07.47 | tangel | is it worth a shot trying to get my TDM400P working in freebsd w/ asterisk? |
| 18:07.56 | *** join/#asterisk iq (~iq@63-230-47-233.omah.qwest.net) |
| 18:07.59 | tangel | it looks like the driver has matured quite a bit but i don't know to what extent |
| 18:08.00 | anachron | i have it working in FreeBSD |
| 18:08.25 | my007ms | y? |
| 18:08.33 | tangel | awesome... i have a dedicated linux machine for asterisk currently but i'd love to ditch it and just put the card in my freebsd gateway machine |
| 18:09.50 | TUplink | Server# /usr/local/etc/rc.d/zap* start |
| 18:09.50 | TUplink | mknod: /dev/wcfxo0: No such file or directory |
| 18:09.58 | TUplink | whats that mean? |
| 18:10.16 | anachron | qwell .. what do i have to add to extensions and features to get moh to work? |
| 18:10.43 | Qwell | got me |
| 18:10.58 | TUplink | device_attach: wcfxo0 attach returned 6 ???? |
| 18:11.30 | anachron | cos when i use #700 to initiate a transfer it says it can't transfer .. but i have the extension and context for it defined |
| 18:12.10 | file | I tell you baby all my dreams come true |
| 18:12.14 | file | when I'm laying next to you |
| 18:12.17 | file | is that so wrong? |
| 18:14.27 | *** join/#asterisk The_Duke (~the_duke@ppp-125-34.adsl.restena.lu) |
| 18:15.42 | The_Duke | is someone here from the UK, who could help me test debug a UK TollFree number? |
| 18:16.48 | Qwell | The_Duke: I can call UK tollfree from FWD |
| 18:17.07 | Qwell | it probably isn't that reliable though |
| 18:17.17 | *** join/#asterisk anthm (~anthmct@CPE-69-76-83-52.wi.res.rr.com) |
| 18:17.18 | *** mode/#asterisk [+o anthm] by ChanServ |
| 18:17.49 | slePP | someone buy me a 4 port T1 controller |
| 18:17.50 | slePP | :P |
| 18:17.57 | file | slePP: no. |
| 18:18.05 | slePP | i give you a new car in return |
| 18:18.06 | Druken | me too |
| 18:18.16 | file | anthm: what evilness have I gotten myself into?!? |
| 18:18.17 | Druken | a NEW car? |
| 18:18.18 | Qwell | slePP: What kind of car? :p |
| 18:18.23 | slePP | Druken: didn't say it was my car ;> |
| 18:18.32 | Qwell | slePP: I'm game |
| 18:18.36 | slePP | Qwell: you live in my city, don't you? probably not a good idea to drive whatever "new" car i may provide ;> |
| 18:18.44 | Qwell | dunno, what city? |
| 18:18.48 | slePP | edmonton |
| 18:18.55 | file | uh huh |
| 18:18.59 | Qwell | different country even :P |
| 18:19.15 | Qwell | slePP: I miss my hostname being Ontario CA... |
| 18:19.48 | Qwell | That always made for a confusing explanation |
| 18:20.35 | my007ms | can someone pleas tell me where to find webmin module |
| 18:20.56 | Druken | doesn't exsist |
| 18:21.17 | my007ms | this not work ftp://ftp.asterisk.org/pub/asterisk/webmin/ |
| 18:21.33 | my007ms | can i find in othere place |
| 18:23.03 | my007ms | i get error msg say "Module webmin is missing a module.info file " |
| 18:23.23 | znoG | i say read www.voip-info.org and manage asterisk through good ole vim |
| 18:23.33 | *** join/#asterisk Weezey (Weezey@lan6.LO.iasl.com) |
| 18:23.54 | Weezey | damn. asterisk-oh323 won't compile against CVS HEAD. |
| 18:24.13 | *** join/#asterisk fcgreco (~fcgreco@200.245.73.163) |
| 18:24.15 | JerJer | go find the author and complain |
| 18:24.21 | *** join/#asterisk brad[] (~brad@brad.developer.gentoo) |
| 18:24.24 | TUplink | i am having trouble installing a Wildcard X100p |
| 18:24.48 | TUplink | says IRQ allocation failed! |
| 18:24.51 | my007ms | how to find author name i try to many |
| 18:25.10 | *** join/#asterisk kimc (~freenode@pcp09643046pcs.wbrmfd01.mi.comcast.net) |
| 18:25.45 | fcgreco | hi folks! I have a TDM04B card, it is installed and configured. Now I need connect a trunk mobile TDMA. Can anyone tell if this trunks are fxo or fxs?? |
| 18:26.13 | Weezey | JerJer: I tried to fix it myself, got further, but still stuck. It's looking for the channel_pvt.h which is now missing. I replaced all the c->pvt->pvt with c->tech_pvt but there's still some stuff that isn't work. |
| 18:26.25 | Weezey | fcgreco: red is fxo, green is fxs |
| 18:26.59 | TUplink | any one have know what i can do with "IRQ allocation failed!" |
| 18:28.19 | my007ms | can some one tell me where to find AMP rpm |
| 18:28.20 | my007ms | ? |
| 18:28.45 | fcgreco | weezey: I now , in my tdm04b I have only fxo modules and one anolog line connect, now I want connect this trunk mobile in a Digium card. I need to know if I need connect it on fxs or fxo module. |
| 18:29.14 | JerJer | Weezey: so then what's wrong with chan_h323? |
| 18:29.52 | Weezey | hmmm, there is one? So, how about them Bo Sox? |
| 18:30.04 | *** join/#asterisk fugitivo (~ajf@201.255.102.41) |
| 18:30.05 | *** join/#asterisk ManxPower (~eric@stirprop-S0-0-0-26.ndcr2.datasync.net) |
| 18:30.22 | *** join/#asterisk __a (user@193.140.215.2) |
| 18:30.36 | Qwell | fcgreco: Would you plug it into the wall, or would a phone plug into it? |
| 18:30.45 | *** part/#asterisk __a (user@193.140.215.2) |
| 18:33.13 | fcgreco | Qwell: I will try to explain a lit bit diferent. I have a TDMA phone, this phone is connected on a card that has a output connect rj11. So I want connect this interface on a Digium card, but I don´t know this interface is fxs or fxo? |
| 18:33.27 | Qwell | So its a phone? |
| 18:33.39 | fcgreco | Qwell: yes |
| 18:33.51 | Qwell | So then it would plug into an FXS |
| 18:34.06 | fugitivo | fxo receives tone, fxs gives tone |
| 18:34.16 | Qwell | ~fxsfxo |
| 18:34.17 | jbot | [fxsfxo] An FXO port expects to receive dialtone and receive ring voltage. An FXS port expects to provide dialtone and provide ring voltage. |
| 18:34.24 | Qwell | yes, that, heh |
| 18:34.28 | fugitivo | :) |
| 18:35.23 | fcgreco | thank you! |
| 18:36.27 | *** join/#asterisk Sedorox (~Sed@12.151.26.93) |
| 18:43.36 | *** join/#asterisk ScaredyCat (~ScaredyCa@i169173.upc-i.chello.nl) |
| 18:43.50 | ScaredyCat | yes my007ms I am :D |
| 18:44.54 | *** join/#asterisk Berkey (mikeberkey@ip70-180-160-35.lv.lv.cox.net) |
| 18:49.17 | my007ms | :) |
| 18:49.49 | my007ms | it's not work y? |
| 18:51.17 | mDuff | I realize this is a bit OT -- point me elsewhere if appropriate -- but I'm looking for a softphone for Linux that either presently can be controlled over a pipe (in place of or in addition to a conventional GUI) or which is modular enough in design to be not excessively hard to tweak to do so. Suggestions? |
| 18:52.41 | fugitivo | hmmm |
| 18:53.12 | fugitivo | there is one, command line, but i don't remember the name |
| 18:55.31 | *** join/#asterisk dontmsgme (~Email@red-corp-201.130.176.54.telnor.net) |
| 18:55.40 | fugitivo | i think its linphone |
| 18:56.00 | *** join/#asterisk tris (~tristan@camel.ethereal.net) |
| 18:56.46 | *** join/#asterisk fcgreco (~fcgreco@200.245.73.163) |
| 18:56.55 | fugitivo | anyone tried phonegaim? |
| 18:57.32 | mDuff | fugitivo, ahh -- it does indeed have a console interface. Useful! |
| 18:57.50 | fcgreco | can I mixed 3 fxo modules and 1 fxs modules on a tdm04b? |
| 18:57.58 | Moc_ | sure |
| 18:58.11 | fugitivo | mDuff: linphone? yes |
| 18:59.04 | *** join/#asterisk MrBelvedr (~tt@ip68-227-218-250.dc.dc.cox.net) |
| 18:59.36 | *** join/#asterisk Umaro (~umaro@209.140.74.64) |
| 19:00.17 | Umaro | Hey guys, has anyone ported the app_chanspy patch to a stable version of asterisk? |
| 19:01.09 | MrBelvedr | what source code file has the Asterisk cmd Dial code? |
| 19:01.46 | *** join/#asterisk NK123 (~admin@cpe-024-163-078-012.nc.res.rr.com) |
| 19:04.01 | ALapo | http://www.local6.com/slideshow/news/3745342/detail.html?qs=1&s=1&p=news&dm=ss&tn=b |
| 19:05.56 | MrBelvedr | that is hilarious |
| 19:06.27 | *** join/#asterisk anthm (~anthmct@CPE-69-76-83-52.wi.res.rr.com) |
| 19:06.27 | *** mode/#asterisk [+o anthm] by ChanServ |
| 19:07.51 | *** join/#asterisk christo (~chris@212.18.226.160) |
| 19:07.54 | christo | evening |
| 19:08.31 | mDuff | hmm -- the linphonec interface is really intended for manual, rather than programmatic use. |
| 19:08.45 | mDuff | think I'll need to revise it a bit. |
| 19:10.13 | *** join/#asterisk Barmal (~1@m615e36d0.tmodns.net) |
| 19:12.35 | MrBelvedr | what source file has the Asterisk cmd Dial code? I am going to tweak the timeout code |
| 19:13.48 | *** join/#asterisk L|NUX (~linux@202.5.145.58) |
| 19:15.46 | christo | is the 'asterisk database' always installed with a vanilla asterisk build? |
| 19:16.47 | mDuff | christo, the libdb-based one? Yes. |
| 19:17.03 | mDuff | (libdb? db2? gdb? don't recall which) |
| 19:17.12 | mDuff | err, gdbm? |
| 19:17.26 | *** join/#asterisk ikey1 (ikey@220.226.8.42) |
| 19:18.10 | DeeJayTwo | For those who were not using postgresql over odbc with Realtime because it was buggy... we fixed it yesterday and it's now in CVS :) |
| 19:18.19 | DeeJayTwo | postgresql rocks =) |
| 19:19.01 | *** join/#asterisk Ali42 (~alimdi@moua7.com) |
| 19:19.50 | Ali42 | hello |
| 19:20.01 | Ali42 | is there any french doc of asterisk? |
| 19:20.06 | eKo1 | you mean realtime through odbc is working? |
| 19:20.34 | *** join/#asterisk voiper (~none@pcp0010158348pcs.eatntn01.nj.comcast.net) |
| 19:20.47 | eKo1 | i thought asterisk was written in french...oh wait, that's c++. Almost fooled me. |
| 19:21.01 | christo | mDuff - okay. It's DB1 isn't it? |
| 19:21.30 | *** join/#asterisk NK1234 ([To0Qjt4Pg@cpe-024-163-073-087.nc.res.rr.com) |
| 19:21.48 | eKo1 | either db1 or db2, don't remember. |
| 19:22.18 | eKo1 | or db3 or db4? |
| 19:22.27 | *** join/#asterisk FuriousGeorge (~brian@ool-43516ebb.dyn.optonline.net) |
| 19:22.31 | FuriousGeorge | hi all |
| 19:22.37 | Berkey | I have been looving for a voip provider with a phone number in las vegas nevada. I keep comming up dry. Anyone got any recomendations? |
| 19:22.50 | FuriousGeorge | im trying to make linux26 and its telling me in need to lin linux to dir with my kernel source, but it is linked |
| 19:23.10 | FuriousGeorge | is this b/c im in a chrooted enviornment? |
| 19:23.29 | eKo1 | why are you in a chrooted environment? |
| 19:23.45 | FuriousGeorge | eKo1: im just installing gentoo and im waiting for kde to compile |
| 19:24.12 | FuriousGeorge | eKo1: but i already compiled my kernel |
| 19:24.30 | *** part/#asterisk fcgreco (~fcgreco@200.245.73.163) |
| 19:25.59 | FuriousGeorge | k, maybe it will fix itself after first boot |
| 19:26.33 | eKo1 | yeah, finish with your other installs, the proceed to install * |
| 19:30.30 | mDuff | christo, sounds right. |
| 19:30.34 | *** join/#asterisk kisu (~kisu@218.237.126.163) |
| 19:32.14 | voiper | anyone here uses chan_h323 ? |
| 19:33.41 | *** join/#asterisk Blackvel (~blackvel@dsl-213-023-034-025.arcor-ip.net) |
| 19:33.48 | Blackvel | good evening |
| 19:34.36 | Blackvel | who would be able (and intersted) to tell me more about show application dial, especially DIALSTATUS The status of the call as a text string, one of |
| 19:34.36 | Blackvel | <PROTECTED> |
| 19:34.38 | convey | Anyone running zaptel on Suse 9.2? |
| 19:36.14 | *** join/#asterisk viLeR (1000@ip-47-252.telesat.com.co) |
| 19:36.28 | *** join/#asterisk zen-froglet (~zen@starlight.chat.za.net) |
| 19:40.19 | *** part/#asterisk ScaredyCat (~ScaredyCa@i169173.upc-i.chello.nl) |
| 19:42.26 | *** join/#asterisk L|NUX (~linux@202.5.145.58) |
| 19:43.02 | DeeJayTwo | <eKo1> you mean realtime through odbc is working? : yes |
| 19:43.23 | DeeJayTwo | there was a bug with null fields.. |
| 19:44.17 | *** join/#asterisk UPMeduardo (~UPMeduard@rpv9.dit.upm.es) |
| 19:44.26 | DeeJayTwo | we only fixed a bug related with SQLGetData |
| 19:44.48 | DeeJayTwo | We're gonna make further test soon to ensure everything is working properly.. |
| 19:45.11 | eKo1 | Excellent. |
| 19:45.46 | DeeJayTwo | Yet, you could use the example withs sip_buddies . |
| 19:51.01 | *** join/#asterisk fcgreco (~fcgreco@200.245.73.163) |
| 19:51.12 | zen-froglet | is there a way to debug the OctoBRI card via the Asterisk command interface |
| 19:51.13 | zen-froglet | <PROTECTED> |
| 19:52.20 | fcgreco | hi! when I am reload asterisk I found this message Apr 23 16:47:44 WARNING[32553]: chan_zap.c:10084 setup_zap: Ignoring signalling. I commented the line signalling=fxs_ks and the message stop. any idea! |
| 19:53.37 | fcgreco | the tdm04b works with the line uncommented , but I don´t know this error. I have a tdm04b. |
| 19:53.59 | *** join/#asterisk voiper (~none@pcp0010158348pcs.eatntn01.nj.comcast.net) |
| 19:54.24 | Atacomm | ~seen denon |
| 19:54.32 | jbot | denon is currently on #asterisk (1d 5h 10m 42s) |
| 20:05.42 | convey | Anyone running zaptel on Suse 9.2? |
| 20:07.05 | eKo1 | Why use Suse? It costs money. |
| 20:08.10 | JerJer | download a linux kernel and busybox |
| 20:08.15 | JerJer | who needs a distro? |
| 20:08.18 | *** join/#asterisk a-evol (~a-evol@217.77.38.2) |
| 20:08.20 | a-evol | hiya guys |
| 20:08.32 | a-evol | anyone here running asterisk on gentoo ? |
| 20:08.40 | eKo1 | yeah |
| 20:08.46 | eKo1 | not me though |
| 20:09.19 | a-evol | heh, who then ? |
| 20:09.27 | JerJer | bkw does |
| 20:10.33 | eKo1 | i thought bkw uses debian |
| 20:10.38 | eKo1 | or is that kram |
| 20:12.07 | *** join/#asterisk voiper (~none@pcp0010084634pcs.eatntn01.nj.comcast.net) |
| 20:13.33 | a-evol | what do you guys run asterisk on then ? |
| 20:13.52 | eKo1 | i run one on fc2, fc3 and redhat enterprise |
| 20:17.08 | L|NUX | can some one tell me how can i change sip realm ? |
| 20:18.03 | DeeJayTwo | I run it on Debian |
| 20:18.07 | DeeJayTwo | and FreeBSD |
| 20:18.13 | eKo1 | realm=myrealm in sip.conf |
| 20:18.16 | a-evol | DeeJayTwo: 5.3 ? |
| 20:18.46 | DeeJayTwo | yes |
| 20:19.34 | a-evol | uhm, do you have a zaptel chip for it ? |
| 20:19.39 | L|NUX | eKo1 : ok thanks |
| 20:19.57 | DeeJayTwo | no |
| 20:20.03 | DeeJayTwo | I was using it for SIP only |
| 20:20.17 | a-evol | okay, did you compile it by hand, or did you use ports ? |
| 20:20.46 | a-evol | I tried with ports but it failed on zaptel, and I couldn't find out how to make it drop zaptel and zapata |
| 20:21.32 | L|NUX | eKo1 : can i define realm for every sip like if i want to define differnet realm for different extensions ? |
| 20:21.37 | DeeJayTwo | from CVS |
| 20:21.47 | zen-froglet | is there some way one can debug a zaptel OctoBRI Card ? |
| 20:22.00 | a-evol | cvsup what_syntax ? |
| 20:22.20 | DeeJayTwo | see www.asterisk.org >> download section |
| 20:26.28 | eKo1 | L|NUX: try it. i'm not usre. |
| 20:26.38 | L|NUX | ok |
| 20:31.24 | *** join/#asterisk Dutts (~dutts@81.168.70.41) |
| 20:34.03 | Blackvel | what does CONGESTION mean in DIAL variable DAILSTATUS? |
| 20:34.56 | *** join/#asterisk harryvv (~leonardo@S010600055d210201.vs.shawcable.net) |
| 20:35.23 | eKo1 | sorta like a busy |
| 20:37.00 | Blackvel | ah I see |
| 20:37.05 | Blackvel | but there is BUSY too |
| 20:37.23 | harryvv | anyone know of a voip carrier that goes into japan? |
| 20:37.25 | Blackvel | wrong number would be an intersting variable to check |
| 20:37.35 | Blackvel | but there is none? |
| 20:41.57 | *** join/#asterisk dmccollum (~dmccollum@69-164-245-72.atlaga.adelphia.net) |
| 20:45.43 | *** join/#asterisk Elshar (~Elshar@ip205-68.oregonfast.net) |
| 20:46.45 | a-evol | anyone here that's got a good idea on how to Not have zaptel install on gentoo ? |
| 20:47.03 | voiper | hi |
| 20:47.10 | voiper | any chan_h323 experts around ? |
| 20:47.43 | zen-froglet | any Zaptel guru's here ? |
| 20:51.44 | harryvv | just talked to somone who was installing a avaya 500 phone system asked him how much the ippbx was said millions. Of course he would not give a price. |
| 20:56.50 | WilliamK | harryvv, the average base system for a toshiba that's IP upgradeable/ready is about 60k |
| 20:56.54 | WilliamK | for something reasonable |
| 20:57.53 | WilliamK | (the sys I'm refering to is kinda like a hybrid) |
| 21:00.05 | harryvv | 60k for how many phones..and is that strait digital to digital phones? |
| 21:01.27 | FuriousGeorge | hey all, i usccessfully logged in to my sip provider and get an sip phone logged into my * box, but im having trouble making outgoing calls. x-lite says 404, and asterisk says nothing unless i have sip debug. will anyone take a look at my sip debug |
| 21:01.33 | *** join/#asterisk iq (~iq@63-230-47-233.omah.qwest.net) |
| 21:02.08 | harryvv | Fur, what protocol does your provider use? |
| 21:02.20 | FuriousGeorge | sip |
| 21:02.28 | harryvv | also what ports do you have open |
| 21:02.33 | FuriousGeorge | doh |
| 21:02.46 | FuriousGeorge | wait that should only affect incomming, right? |
| 21:03.58 | FuriousGeorge | i passed port 5060 to my * box but it didnt help |
| 21:04.20 | harryvv | mostly but you need sip and rtp open. rtp spans 10000-20000 |
| 21:05.17 | FuriousGeorge | harryvv: shouldnt that only matter for incomming calls where i am making outgoing? |
| 21:05.23 | harryvv | no |
| 21:05.28 | harryvv | rtp is very important |
| 21:05.52 | harryvv | you need both ways...you talk to somone the packet traffic is flowing both ways. |
| 21:06.28 | FuriousGeorge | harryvv: i had this working once before, but i have always used a nat here, (will change one day), i dont have the option to pass rtp protocol in that nat |
| 21:06.43 | WilliamK | harryvv, client got 96 stations total all digital, like 8 phones are the big supervisor phones |
| 21:07.10 | FuriousGeorge | since i reformated my drive, i got the sip host registered, and my sip client registered, but im now sure what im doing different. if u want to take a look at my sip debug its here |
| 21:07.24 | FuriousGeorge | http://pastebin.ca/10153 |
| 21:07.26 | harryvv | no its your firewall |
| 21:07.34 | voiper | furious put the box on dmz if you can (if you are using * only to go out you don't have to, but worth of a try) |
| 21:07.42 | harryvv | check the firewall its a large part of everyone sip/rtp problems. |
| 21:08.20 | harryvv | my router will not work only have 20 ports that can be open so cannot do sip. does iax well though. |
| 21:08.27 | FuriousGeorge | k, im gonna go in the dmz, if that solves it we know it was the problem. im pretty sure it is configured exactly like it was when this was working. only thinkg i changed was * |
| 21:09.16 | voiper | did you set the extenip inside sip.conf ? |
| 21:09.31 | harryvv | he does not need to do that |
| 21:09.58 | FuriousGeorge | ok, i went into the dmz and still didnt make an outgoing call, so it aint the fw |
| 21:10.08 | voiper | looks like you are sending your nat ip to provider |
| 21:10.08 | harryvv | rtp Fur |
| 21:10.15 | harryvv | rtp needs to be opened up |
| 21:10.51 | harryvv | http://www.cs.columbia.edu/~hgs/rtp/faq.html |
| 21:10.56 | harryvv | thats on rtp |
| 21:10.57 | voiper | harryW i have a * running behind nat without forwarding rtp |
| 21:11.05 | FuriousGeorge | harryvv: i promise you this was working before i did a mkreiserfs /dev/evms/boot. i do plan on using a linux box for nat one day, but not yet. i cant pass rtp on my linksys residential gateweay device |
| 21:11.05 | voiper | i have the box on dmz |
| 21:11.39 | FuriousGeorge | i mean mkresierfs /dev/evms/root |
| 21:11.58 | harryvv | symptoms of rtp ports not open is the remote calling party will hear you but you cannot hear them. |
| 21:12.18 | voiper | try putting your real ip inside sip.conf extenip |
| 21:12.37 | harryvv | why would that make a difference voiper? |
| 21:12.56 | voiper | when he sends a request to provider the request will go out as his real ip and not 10.xxx (internal ip) |
| 21:13.05 | voiper | so the provider knows whom to respond back |
| 21:13.18 | zen-froglet | zaptel specialists ? |
| 21:13.38 | FuriousGeorge | harryvv: i think my symptoms are resulting from improperly set up sip.conf and extensions.conf. i cant call out with this line: exten => ._,1,dial(sip/sipout/${EXTEN:1},20) |
| 21:14.04 | harryvv | voiper: that still does not solve his rtp problem if its not open. |
| 21:14.30 | FuriousGeorge | "sipout" is in [ ] in sip.conf where i registered my provider for outgoing calls |
| 21:14.32 | voiper | if the box is on dmz that solves the rtp issue |
| 21:14.55 | harryvv | not if he cannot span 10,000 ports |
| 21:15.05 | FuriousGeorge | which it was and it still didnt work, and btw, before i reformated my root partition this worked fine, i dont know about incomming, didnt try, but ill cross that bridge when i get there |
| 21:15.48 | FuriousGeorge | i promise i was able to make outgoing calls, and they were able to hear me, w/o doing anything to my nat, besides passing 5060 to my * box |
| 21:16.05 | harryvv | but did you hear them? |
| 21:16.26 | FuriousGeorge | perfectly |
| 21:16.37 | FuriousGeorge | not so much as a jitter, echo, or lost packet |
| 21:16.58 | voiper | sipout is configured as a peer ? |
| 21:18.19 | FuriousGeorge | yeah, im gonna make another pastebin, if this thing im trying now doesnt work |
| 21:18.35 | harryvv | I can make 100% iax connections to anyone but sip cannot because of my poor rtp range. |
| 21:19.11 | *** join/#asterisk Nethab (~chatzilla@adsl-67-113-141-170.dsl.sntc01.pacbell.net) |
| 21:20.52 | harryvv | hate it when a cybersquater sits on a decent domain name. |
| 21:22.16 | *** join/#asterisk pepzi (robert@hd5e24fa4.gavlegardarna.gavle.to) |
| 21:22.28 | FuriousGeorge | i bet if you look here you can find a stupid mistake in my .confs http://pastebin.ca/10158 . i would appreciate it |
| 21:22.36 | nine76 | heh... |
| 21:22.47 | FuriousGeorge | extensions.conf is a few lines at the bottom |
| 21:23.21 | Nethab | wow CVS has been busy these last couple weeks |
| 21:23.43 | Nugget | That's why I go to Safeway instead. |
| 21:23.53 | Blackvel | FuriousGeorge: is that * behind NAT? add externip |
| 21:23.57 | Nethab | either that or someone has been putting extra indentation in the comments again |
| 21:24.08 | nine76 | <PROTECTED> |
| 21:24.17 | nine76 | I could be wrong,but that appears incorrect? |
| 21:24.25 | FuriousGeorge | Blackvel: it is, what if its dynamic, i think i remember setting that last time |
| 21:24.43 | Blackvel | cvs or stable? |
| 21:24.49 | Blackvel | externip=xxx.dyndns.org |
| 21:24.51 | Blackvel | or externhost |
| 21:24.53 | Nethab | Dial(SIP/provider/${EXTEN:1},20 is correct |
| 21:25.11 | Nethab | i updated CVS head just now and a bunch of files updated |
| 21:25.15 | Nethab | more than usual |
| 21:25.20 | Blackvel | right that is wrong too :) |
| 21:25.23 | nine76 | ,_,1,!? |
| 21:25.36 | Nethab | oh _. not ._ |
| 21:25.41 | nine76 | :) |
| 21:25.45 | Nethab | underscore comes first |
| 21:25.52 | *** join/#asterisk n4y (~tmalkut@fire2.orasoft.net.pl) |
| 21:26.09 | Nugget | by definition :) |
| 21:26.12 | FuriousGeorge | Blackvel: adding externip to [sipout] part of sip.conf |
| 21:26.19 | *** join/#asterisk bkw_ (~bkw_@bkw.developer.and.friend.of.asterisk) |
| 21:26.19 | *** mode/#asterisk [+o bkw_] by ChanServ |
| 21:26.27 | Blackvel | does that make sense: dial(sip/sipout/${EXTEN:1}, ? |
| 21:26.30 | Blackvel | no |
| 21:26.33 | Blackvel | [general] |
| 21:26.42 | Blackvel | what do you want to do? |
| 21:26.45 | Blackvel | dail sipout sip telephone? |
| 21:26.48 | Nethab | just make sure your parenthesis are closed |
| 21:26.54 | Blackvel | throw away exten then |
| 21:27.23 | Blackvel | upps |
| 21:27.30 | Blackvel | its your voip provider? |
| 21:28.27 | FuriousGeorge | sorry |
| 21:28.30 | Nethab | externip doesn't go under a provider section |
| 21:28.35 | FuriousGeorge | i just want to make outgoing calls for now |
| 21:28.43 | Blackvel | use instead of this: exten => _91.,1,Dial(SIP/${EXTEN:2}@sipout,30,r) |
| 21:28.57 | FuriousGeorge | so i registered [sipout] with my sip provider credentials |
| 21:29.53 | Nethab | any good changes to the manager api recently |
| 21:30.07 | Blackvel | why, is it bad? :) |
| 21:30.50 | FuriousGeorge | Blackvel: thats not it, exact same thing happened. my syntax on that line last time was something like taht |
| 21:31.00 | Blackvel | believe me |
| 21:31.04 | Blackvel | it works here |
| 21:31.49 | FuriousGeorge | im not saying the line's syntax is bad or wrong, im just saying the same thing happens |
| 21:32.02 | Blackvel | well what? |
| 21:32.13 | Blackvel | errmsg might help |
| 21:32.14 | Blackvel | ;) |
| 21:32.24 | FuriousGeorge | hollon |
| 21:33.00 | FuriousGeorge | asterisk says nothing, x-lite says 404 not found, and sip debug says: http://pastebin.ca/10153 |
| 21:33.10 | Blackvel | xlite? |
| 21:33.13 | Blackvel | what number do you dail? |
| 21:33.32 | Blackvel | then your extension matching is still wrong |
| 21:33.45 | FuriousGeorge | tried an 800 number (sip phone lets you call them free) and '**' which just gives you a "welcome to sip phone message" |
| 21:34.08 | Blackvel | do you have exten => _.,1,dial now? |
| 21:34.29 | FuriousGeorge | i ahve it as you put it in the channel now, in extensions.conf |
| 21:34.51 | Blackvel | sipin is a typo too: ._1,dial |
| 21:35.02 | Blackvel | should be _.,1,dial |
| 21:35.19 | *** join/#asterisk Juggie (agony@CPE00c049d9f271-CM014270110981.cpe.net.cable.rogers.com) |
| 21:35.21 | Blackvel | or even <exten>,1,dial |
| 21:35.50 | Blackvel | according to your register .../sipin |
| 21:35.51 | Blackvel | sipin |
| 21:36.10 | Blackvel | exten => sipin,1,Dial(SIP/brian) |
| 21:36.28 | Blackvel | hit reload yet? |
| 21:36.33 | FuriousGeorge | exten => ._,1,Dial(SIP/brian,20) |
| 21:37.08 | FuriousGeorge | i'm in, cover me |
| 21:37.41 | FuriousGeorge | thanks a bunch |
| 21:39.19 | Blackvel | no |
| 21:39.24 | FuriousGeorge | actually, it appears as if its connecting, but getting disconnected. i havent set up sound yet, so i should probably wait till i do before i go any further with this one |
| 21:39.35 | Blackvel | exten => _.,1,Dial(SIP/brian,20,<options>) |
| 21:40.04 | *** join/#asterisk Blissex (~Blissex@82-69-39-138.dsl.in-addr.zen.co.uk) |
| 21:40.22 | FuriousGeorge | do i need options? at least one? ill fix that period comma order thing |
| 21:40.36 | convey | Anyone running zaptel on SLES9? |
| 21:42.36 | Blackvel | not too sure |
| 21:42.39 | Blackvel | maybe not |
| 21:44.32 | convey | anyone here with zaptel experience? |
| 21:45.43 | Blackvel | a bit |
| 21:45.46 | Blackvel | on rh9 |
| 21:45.46 | Blackvel | ;) |
| 21:45.48 | *** join/#asterisk UPMeduardo (~UPMeduard@rpv9.dit.upm.es) |
| 21:46.05 | Nethab | no you don't need any options |
| 21:46.13 | Nethab | you don't even need a timeout |
| 21:46.21 | Nethab | it will just try forever |
| 21:46.48 | convey | blackvel: I can't seem to get the zaptel service to start. |
| 21:48.26 | Blackvel | insmod zaptel does not work? |
| 21:48.33 | Blackvel | compile was fine? |
| 21:49.53 | convey | compile was fine. Insmod returns "Invalid module format" |
| 21:52.22 | *** join/#asterisk mountie (~mountie@24.42.99.232) |
| 21:54.04 | *** join/#asterisk jtodd (~jtodd@garthim.fox-den.com) |
| 21:55.12 | Atacomm | jtodd |
| 21:55.16 | Atacomm | long time no see |
| 21:55.22 | jtodd | Howdy. |
| 21:55.33 | jtodd | Yes, I've been just lurking here for a while. |
| 21:55.44 | jtodd | Too many other things pulling me in different directions to natter on IRC. :-) |
| 21:55.50 | Atacomm | yeah, same here |
| 21:57.58 | Atacomm | jtodd: been too busy on several different development projcets :) |
| 21:58.50 | jtodd | Good time to be in the VoIP market, I guess. |
| 21:59.23 | Atacomm | ya, you know about some of my projects right? |
| 21:59.49 | jtodd | Hard to keep track of everyone's projects. :-) |
| 21:59.50 | Blackvel | hm |
| 21:59.58 | jtodd | Are you the one doing the DSP card? |
| 22:00.14 | Blackvel | good time for the US market? :) |
| 22:00.28 | jtodd | Blackvel: good time in any market, actually. |
| 22:00.39 | Blackvel | germany? forget it |
| 22:00.48 | jtodd | Blackve |
| 22:00.51 | Atacomm | jtodd: yup, we've got cards in house we are playing with now :) |
| 22:00.58 | jtodd | Blackvel: no, .de too. I know at least three people in that area. |
| 22:01.05 | jtodd | Atacomm: finally. |
| 22:01.25 | Blackvel | yes, but that does not tell anything about budgets, businesses or middle to enterprise projects :) |
| 22:01.36 | Atacomm | jtodd: yup, wanna see? ;) |
| 22:01.40 | jtodd | atacomm: well, let me know when those are ready to ship. I've been hoping that those weren't vaporware, but until I get my hands on one (i.e.: you're ready to ship them) it's still just a nice day dream. :-) |
| 22:01.44 | Blackvel | i know some voip guys from .de too |
| 22:01.55 | jtodd | atacomm: sure. |
| 22:02.06 | Atacomm | jtodd: msg me your email addr :) |
| 22:02.14 | jtodd | blackvel: I've heard no complaints from my .de associates; seems to be doing well, there. |
| 22:03.05 | Atacomm | jtodd: on its way :) |
| 22:08.29 | Nethab | really, i want to be in a project, can I please, mommy please? |
| 22:09.25 | Blackvel | jtodd: *? |
| 22:09.29 | Blackvel | hehe |
| 22:09.48 | Atacomm | Nethab: lol |
| 22:10.05 | jtodd | Blackvel: You mean are they using asterisk? |
| 22:10.06 | Nethab | as long as I can use popsicle sticks |
| 22:10.27 | Atacomm | hahaha |
| 22:10.34 | Blackvel | voip != * |
| 22:10.39 | Blackvel | not necessarily |
| 22:10.59 | Nethab | some day * will have presence and text messaging working |
| 22:11.00 | Blackvel | jtodd: but you rely more on voip, don't you? |
| 22:11.05 | Nethab | then it won't be voip |
| 22:11.08 | jtodd | Blackvel: Yes... correct.... I'm not sure what your point is. |
| 22:11.49 | *** join/#asterisk daf_duck (daf_duck@5354E072.cable.casema.nl) |
| 22:12.08 | ScythelX | anyone ever have problems with inbound calling on a cisco 79XX phone being very choppy because its sucking up a shitload of bandwidth |
| 22:12.34 | Blackvel | jtodd: me neiter :) |
| 22:12.52 | ScythelX | and im using g729 |
| 22:17.04 | *** join/#asterisk Weezey (WeezeyD@206.210.109.233) |
| 22:18.25 | Weezey | I installed h323 by the book, everything compiled nicely, but when I run asterisk, it just stops at [chan_h323.so] I'm running CLI with -vvvvvvvvvvvvvvvvvv so where can I find the logs? |
| 22:20.17 | Nethab | -vvvvvvvvgc? |
| 22:20.21 | daork | that tends to happen when configuration is well broken |
| 22:20.38 | daork | or, slightly broken |
| 22:21.57 | Blackvel | i am off |
| 22:21.58 | Blackvel | n8 |
| 22:22.01 | Weezey | daork: hmmm, I had invalid IP before, but even with a valid one, no go. |
| 22:22.11 | Weezey | Nethab; yes. gc too |
| 22:28.30 | *** join/#asterisk shido (~shido@d57-87-253.home.cgocable.net) |
| 22:28.45 | shido | ubuntu is cool lookin |
| 22:29.38 | Nugget | Linux is poo. |
| 22:30.03 | jake | . |
| 22:30.50 | alt | Nugget: take that back before I beat you with a wet noodle |
| 22:31.48 | niZon | that was odd... SJPhone just randomly crashed |
| 22:32.01 | jake | SJPhone for Windows? |
| 22:32.05 | niZon | yeah |
| 22:32.06 | Nethab | apostrophe surgery is an unneccesary procedure |
| 22:32.20 | jake | unlike a Windows app to just crash randomly |
| 22:32.34 | niZon | *shrug* |
| 22:32.36 | alt | does musiconhold only work on a zaptel card? |
| 22:32.45 | Druken | alt: no |
| 22:32.52 | zen-froglet | anyone got a moment to assist with zaptel card issue ? |
| 22:32.58 | alt | then why can't I get MoH? |
| 22:33.00 | alt | grrr... |
| 22:33.06 | alt | what the heck am I doing wrong? |
| 22:33.14 | Druken | how are you getting moh on the zaptel ? |
| 22:33.19 | alt | I'm not |
| 22:33.21 | alt | I don't have one |
| 22:33.27 | alt | I have the ztdummy interface installed |
| 22:33.50 | *** join/#asterisk Berkey (mikeberkey@ip70-180-160-35.lv.lv.cox.net) |
| 22:34.13 | Druken | oh |
| 22:34.14 | alt | I'm using an entirely SIP infrastructure. Clients and gateways |
| 22:34.26 | alt | but I don't see any docs regarding SIP+MoH |
| 22:35.05 | Druken | where are you expecting it? |
| 22:35.09 | Nugget | that's because SIP has nothing to do with MoH |
| 22:35.14 | Nugget | they're entirely unrelated |
| 22:35.15 | zen-froglet | can anyone assist, I have a Zaptel OctoBRI card configured with Asterisk. I can authenticate a sip phone and dial out. The card does not seem to be answering calls from external |
| 22:35.24 | alt | Nugget: I suspected as much |
| 22:35.54 | alt | here's another thing. if I press the mute button on my 7940 the MoH mutes too.... |
| 22:35.57 | alt | I think it's all related. |
| 22:36.18 | alt | maybe I should try looping the call through the 'local' channel |
| 22:36.48 | Berkey | anyone use International Number Exchange? |
| 22:36.59 | Berkey | INX they call it. |
| 22:39.21 | Druken | 5 bux a month eh... |
| 22:41.11 | *** join/#asterisk shido6 (~greg@d57-87-253.home.cgocable.net) |
| 22:41.33 | Atacomm | hey shido, hows it going |
| 22:44.37 | JerJer | what happened to this big hardware launch in march? |
| 22:44.49 | shido6 | hey atacomm |
| 22:44.52 | shido6 | sup? |
| 22:45.02 | shido6 | nice point to start tho :) |
| 22:45.06 | shido6 | where's the echocancelling gear? |
| 22:45.07 | shido6 | :) |
| 22:45.14 | Atacomm | jerjer: dates change, its happening soon, several people here have seen it |
| 22:45.24 | JerJer | yeah typical story |
| 22:45.33 | JerJer | you told me I would see it in march |
| 22:45.38 | JerJer | vapor |
| 22:45.42 | JerJer | hype |
| 22:45.46 | JerJer | bullshit |
| 22:46.19 | Atacomm | as you wish jeremy |
| 22:46.31 | JerJer | you assured me I would see it in march |
| 22:46.36 | JerJer | you were so sure of yourself |
| 22:46.38 | WilliamK | hey Jer, I've actually seen the pictures so far |
| 22:46.44 | JerJer | now its "dates change" |
| 22:46.49 | Atacomm | actually since you and i never get along, i never assured you of anything |
| 22:46.55 | WilliamK | things take time |
| 22:47.16 | JerJer | then don't say a god damn thing about it until you are ready |
| 22:47.34 | Atacomm | then dont listen |
| 22:47.43 | JerJer | its called hype |
| 22:47.46 | JerJer | and i don't subscribe to it |
| 22:47.53 | WilliamK | Jer, someone forget to give you your sugar today? cuz that was harsh |
| 22:48.00 | Atacomm | lol |
| 22:48.07 | JerJer | you want to create a market before having a product to justify spending the cash to manufacture your product |
| 22:48.13 | JerJer | don't lie |
| 22:48.16 | JerJer | espcially to yourself |
| 22:48.26 | Atacomm | no need to do that |
| 22:48.30 | Atacomm | market exists |
| 22:48.49 | JerJer | then why the 6 months of hype? |
| 22:48.54 | JerJer | pre order now |
| 22:49.19 | Druken | i'm havin a brain fart... who's the guy from sudbury ontario ? |
| 22:49.27 | *** join/#asterisk mrgoby (~mrgoby@pcp05302654pcs.wanarb01.mi.comcast.net) |
| 22:50.17 | Atacomm | because we can, nothing written in the law says we cant talk about an unreleased product....everyone does that, look at Intel, AMD, IBM... even Digium spreads info long before they release a new card |
| 22:50.29 | JerJer | bullshit |
| 22:50.49 | JerJer | they have real hardware revs before doing the marketing |
| 22:51.12 | JerJer | i knew about digum's DS-3 card for months, but I never said a goddamn thing to anyone |
| 22:51.28 | Druken | a ds3 card? |
| 22:51.31 | Atacomm | yup, I've known about their DS3 gear as well, whats your point? |
| 22:51.32 | Druken | shiat.... |
| 22:52.46 | JerJer | digium didn't go spreading it aruond before it was even fully designed to make a market for it |
| 22:52.54 | *** part/#asterisk pooh_ (user78@cust.15.241.adsl.cistron.nl) |
| 22:52.58 | JerJer | and Digium doesn't screw people over |
| 22:53.19 | JerJer | for trivial bits of technical information |
| 22:53.43 | Atacomm | i have no idea what bullshit you are spreading now, but to each their own |
| 22:53.54 | JerJer | you certainly know |
| 22:54.04 | JerJer | and so does many in this community |
| 22:54.17 | Atacomm | if thats what you want to think, go ahead |
| 22:54.36 | JerJer | no need to think - i've got first hand experience |
| 22:54.54 | Atacomm | in smoking crack yes you do |
| 22:55.03 | zen-froglet | anyone know of anything special that needs to be added for asterisk to answer incomming isdn calls? |
| 22:55.11 | JerJer | slePP gives me crack cookies all the time |
| 22:55.16 | JerJer | i love them |
| 22:55.23 | Atacomm | lol |
| 22:55.32 | slePP | they're good for you |
| 22:55.44 | JerJer | Atacomm: I am going to let you slit your own throat with your own actions |
| 22:55.51 | JerJer | time will tell |
| 22:56.02 | *** join/#asterisk MatsK (~matsk@107.80-202-57.nextgentel.com) |
| 22:56.07 | jalsot_ | hi |
| 22:56.13 | JerJer | zen-froglet: an exten |
| 22:56.18 | JerJer | for the incoming DID |
| 22:56.31 | jalsot_ | is there a way to check if there are slips on PRI? |
| 22:56.34 | WilliamK | hey Jer, actually I've had 0 bad dealings with Dan or his company, and 0 with digium, so I'd say this is just a free enterprise environment and ya'll should live to tolerate free enterprise cuz if you can't then neither can be good at business. |
| 22:57.06 | JerJer | one enterprise doesn't promise to deliever something then ends up developing their own solution instead |
| 22:57.10 | zen-froglet | JerJer: it's not DID, just a regular incomming call from external. Am i supposed to map it to something ? |
| 22:57.49 | JerJer | zen-froglet: it has to come inbound on some sort of DNIS |
| 22:57.57 | JerJer | or use the special extension 's' |
| 22:58.00 | alt | well.. I should preface my MoH problem with this fact: If I use the 't' option in the dial() function and then press "#" to transfer I do get MoH. But if I use the Cisco 7940's Hold and Transfer buttons I do not. |
| 22:58.06 | WilliamK | Jer, re-read what you typed please, cuz I don't get the point of what you were saying |
| 22:58.27 | JerJer | ie you don't make a promise to do something |
| 22:58.33 | JerJer | then do something else |
| 22:58.44 | JerJer | after the game started |
| 22:59.25 | JerJer | or don't shit where you eat |
| 22:59.31 | jake | sounds like it's just taking them a little longer than expected... is that no true? |
| 23:00.01 | *** join/#asterisk Chickens (Oo@ip68-3-238-32.ph.ph.cox.net) |
| 23:00.20 | zen-froglet | JerJer: it comes into default. but not seeing any activity on the BRI |
| 23:00.33 | zen-froglet | no activity in asterisk at all |
| 23:00.44 | JerJer | not sure then - i know almost nothing about BRI |
| 23:01.16 | zen-froglet | tis like PRI, except i only have two channels |
| 23:01.34 | JerJer | is it a zaptel driver? |
| 23:02.04 | zen-froglet | it is |
| 23:02.15 | zen-froglet | zaptel OctoBRI card |
| 23:02.28 | JerJer | then in zapata.conf put a context=something |
| 23:02.54 | JerJer | then in extensions.conf put exten => _X.,1,NoOP(${EXTEN}) |
| 23:03.04 | JerJer | in [somthing] |
| 23:03.09 | JerJer | speeld right |
| 23:03.42 | zen-froglet | lemmy try that |
| 23:04.16 | PTG1234 | anyone need a cisco 7206VXR router, before i sell it on ebay? |
| 23:04.58 | Chuji | PTG1234 : How much? |
| 23:05.13 | PTG1234 | make me an offer, if its decient its yours :) |
| 23:05.19 | PTG1234 | i hate to go through the trouble of ebaying |
| 23:05.30 | PTG1234 | also got a pix 515 Unlimited if anyone needs one |
| 23:05.45 | *** join/#asterisk clint_ (~clint@snap.helixsystems.com) |
| 23:05.53 | Chuji | shit man, that means I have to research what they are worth |
| 23:05.53 | CoaxD | PTG1234: Whats all in it? |
| 23:06.08 | CoaxD | PTG: (The 7206VXR) |
| 23:06.14 | PTG1234 | extra FE card, w/ 2 ports.. and an OC3 interface |
| 23:06.22 | PTG1234 | dual power supply |
| 23:06.28 | CoaxD | Oooh. Too much for me. I fold |
| 23:06.29 | PTG1234 | how do i see what the NPE is in it? |
| 23:06.31 | PTG1234 | i am in the console |
| 23:07.23 | CoaxD | (I say "What the fuck is an NPE", and he's gonna think i'm a total idiot.) |
| 23:07.27 | PTG1234 | whats the command to see the specs on this thing |
| 23:07.32 | PTG1234 | the cpu i think :) |
| 23:07.32 | CoaxD | 'show ver' |
| 23:07.54 | CoaxD | that'll show you everything you need to know about that |
| 23:08.02 | clint_ | So I just upgraded to current CVS from a version from Feb... and my existing voicemail outgoing messages won't play with error: format_wav_gsm.c: Unexpected header size 16... Anyone have any ideas? |
| 23:08.19 | PTG1234 | k |
| 23:08.27 | PTG1234 | Chuji: you still there? |
| 23:08.30 | CoaxD | cisco 4500 (R4K) processor (revision B) with 32768K/16384K bytes of memory. |
| 23:08.30 | CoaxD | Processor board ID 03190118 |
| 23:08.30 | CoaxD | R4600 CPU at 100Mhz, Implementation 32, Rev 2.0 |
| 23:08.48 | Chuji | PTG1234 : Probably more than I need too man |
| 23:08.52 | PTG1234 | Processor board ID 21290135 |
| 23:08.52 | PTG1234 | R7000 CPU at 262Mhz, Implementation 39, Rev 2.1, 256KB L2, 2000KB L3 Cache |
| 23:08.52 | PTG1234 | 6 slot VXR midplane, Version 2.0 |
| 23:08.53 | CoaxD | damn, the cat across the room just farted. Damn, that was loud |
| 23:09.00 | PTG1234 | what you guys need them for? :) |
| 23:09.12 | CoaxD | PTG1234: Nice |
| 23:09.28 | CoaxD | PTG1234: I could _use_ it, but I'd need some more interfaces, and that router is worth *way* more than I could pay |
| 23:09.47 | PTG1234 | What do you guys think its worth? |
| 23:09.55 | PTG1234 | Right now its worth nothing to me :) |
| 23:09.58 | CoaxD | just the router alone is probably worth $3500 |
| 23:10.00 | *** join/#asterisk bjohnson (~bjohnson@66.11.188.120) |
| 23:10.05 | CoaxD | now, add interfaces |
| 23:10.13 | CoaxD | that is a guess, tho |
| 23:10.34 | CoaxD | <-- offers $500. *lol* |
| 23:10.45 | niZon | PTG, do you have any managed switches or wireless (802.11g) equipment? |
| 23:10.56 | PTG1234 | managed switches i do |
| 23:11.07 | *** join/#asterisk harryvv (~leonardo@S010600055d210201.vs.shawcable.net) |
| 23:11.09 | PTG1234 | 80211b i have like a wrt54g with booster, thats about it |
| 23:11.11 | CoaxD | sure wish i could afford a managed 24 port |
| 23:11.14 | PTG1234 | nizon: what are you looking for? |
| 23:11.16 | CoaxD | like a cisco 2924xl |
| 23:11.33 | harryvv | CoaxD for how large a network |
| 23:11.40 | niZon | well i could use another wrt54g :P |
| 23:11.44 | CoaxD | harryvv: Um, 24 ports? :) |
| 23:11.45 | PTG1234 | i got a HP 4000M i am gonna get rid of cheap, the management software on that is pimp |
| 23:11.54 | niZon | how much? |
| 23:11.57 | CoaxD | PTG: I guess I do have one of those, but i dont have it fully loaded w/ ports |
| 23:12.06 | CoaxD | PTG: I think i have...what..8 ports? |
| 23:12.08 | harryvv | pimp mmm sounds like your in your early 20s |
| 23:12.09 | harryvv | ;) |
| 23:12.12 | PTG1234 | CoaxD: ah this is loaded |
| 23:12.19 | CoaxD | PTG: That thing is worth what, $150? :) |
| 23:12.22 | PTG1234 | i think one slot is empty, with redudant PS etc |
| 23:12.28 | CoaxD | PTG: Ah. mine only has 1 PS |
| 23:12.30 | PTG1234 | Coax: without the card? |
| 23:12.44 | zen-froglet | JerJer: *8( still not answering calls |
| 23:12.44 | CoaxD | PTG: Hmm, no, i dont think they're worth squat even WITH the cards |
| 23:12.47 | PTG1234 | haha late 20s :) |
| 23:12.48 | harryvv | PTG what cpu ram ? |
| 23:12.58 | PTG1234 | coaxd: according to ebay, probably $800-1000 |
| 23:13.02 | CoaxD | PTG: Damn |
| 23:13.16 | PTG1234 | i'd probably get rid of it for $400 maybe even less |
| 23:13.18 | CoaxD | PTG: Well, they can handle what, 96 ports? I forget how many slots |
| 23:13.20 | harryvv | servers on ebay are going cheap these days compared to a few years ago |
| 23:13.25 | PTG1234 | the java app on that thing alone is worth the money if you ask me :) |
| 23:13.35 | PTG1234 | i love watching my network dance around in real time |
| 23:13.36 | CoaxD | PTG: Heh :) |
| 23:13.46 | CoaxD | PTG: Yeah, i bet. I've never actually used one of 'em |
| 23:13.58 | PTG1234 | nizon: what you need the switch for? |
| 23:14.00 | CoaxD | PTG: The HP managed switching gear tho is pretty cool, tho, from what i've heard |
| 23:14.17 | PTG1234 | yah its just as good as the big boys, just not as expensive.. and their java app blows away the others.. |
| 23:14.18 | CoaxD | PTG: Tho i tell ya, they're *way* too big of a form factor to be useful |
| 23:14.22 | PTG1234 | i just have no need for all this stuff now |
| 23:14.23 | harryvv | My training was in cisco vlan switches |
| 23:14.28 | niZon | PTG1234: actually I just want the wireless router :P |
| 23:14.28 | CoaxD | PTG: (Tho, that form factor filled with gbics is pretty damn sweet) |
| 23:14.39 | niZon | i probablly couldn't afford the switch |
| 23:14.40 | niZon | lol |
| 23:14.47 | PTG1234 | nizon: how much for it and the booster? i'll sell it.. i am using a SRX now |
| 23:15.16 | CoaxD | <-- broke mofo |
| 23:16.16 | iq | hi, anyone heard about Sipura's plans to add IAX in IP phones? |
| 23:16.39 | harryvv | iq if that happens it would be a nice blessing. |
| 23:17.14 | Chuji | If the iax2 rcf gets done it might speed up the process |
| 23:17.44 | Chuji | rcf = rfc btw |
| 23:18.03 | JerJer | iq: sipura won't do it |
| 23:18.27 | JerJer | no matter how many petitions get signed |
| 23:18.37 | JerJer | and then canceled |
| 23:19.40 | CoaxD | too much work for too little return |
| 23:20.18 | niZon | i want to see an IAXy with an FXO interface |
| 23:20.24 | CoaxD | um |
| 23:20.25 | PTG1234 | wow the booster is going on ebay for $71 right now |
| 23:20.28 | CoaxD | the point would be...? |
| 23:21.10 | CoaxD | being able to plug in a phone line to it and take incoming calls? |
| 23:21.23 | CoaxD | I spose that would be useful, but why not just use a PCI card? |
| 23:21.49 | CoaxD | The whole point of an ATA is to plug an analog phone into it and make calls |
| 23:22.43 | *** join/#asterisk Tili (~Tili@202-133-65-108-dialup.sat.net.pk) |
| 23:22.55 | Nethab | the reason is my * server is co-located and my FXO line is at home |
| 23:23.15 | Nethab | or in many different offices |
| 23:24.42 | Druken | why use fxo lines? get your numbers hosted with a real provider |
| 23:24.49 | Druken | would be much cheaper |
| 23:25.43 | Nethab | sbc is bastards and is holding up portability |
| 23:25.50 | PTG1234 | my stupid pda just hard reset |
| 23:25.58 | PTG1234 | GRRR |
| 23:26.03 | niZon | palm? |
| 23:26.24 | PTG1234 | no PPC6600 |
| 23:26.27 | niZon | hm |
| 23:26.30 | PTG1234 | reset switching battery |
| 23:26.34 | Nethab | the pocketpc sjphone? |
| 23:26.45 | CoaxD | Druken: You know full well that not everybody can do that |
| 23:26.47 | PTG1234 | the smartphone ppc |
| 23:27.27 | CoaxD | Druken: And , FYI, a "REAL PROVIDER" is one that is regulated. Not some one-off lame ISP owned by 1 person. |
| 23:27.44 | CoaxD | Druken: As much as we'd like to admit, internet telephony is not as reliable as regulated service. |
| 23:28.02 | CoaxD | s/admit/believe |
| 23:28.38 | Atacomm | hey file |
| 23:28.45 | file | hi |
| 23:28.52 | CoaxD | Druken: This is not to say that we shouldn't give 'em props and do business with the voip providers out there; just saying that of the ones that are regulated versus the ones that are not regulated, the ones that are regulated will provide better, more stable service, as a rule |
| 23:28.53 | Nethab | actually broadvoice is pretty decent, we set it to forward to our POTS line on failure |
| 23:29.03 | *** join/#asterisk three55ml (trilluser@cpe-66-25-89-157.satx.res.rr.com) |
| 23:29.06 | CoaxD | Nethab: broadvoice was down for at *least* 4 hours a couple weeks ago |
| 23:29.08 | JerJer | Atacomm: so no words in your defense? typical |
| 23:29.25 | CoaxD | Nethab: Show me 1 FCC regulated telco that could be down that long without severe retribution. |
| 23:29.33 | JerJer | guess its hard to deny the truth |
| 23:29.51 | Nethab | you missed the part about forwarding to sbc pots line |
| 23:30.14 | CoaxD | nethab: This means that you are relying upon broadvoice to deliver your calls |
| 23:30.20 | CoaxD | Nethab: Which is great, except if you want true reliability |
| 23:30.33 | *** join/#asterisk Rick_Hunter (~rhunter@07-098.008.popsite.net) |
| 23:30.39 | Nethab | well we wanted cheap not reliable to i'm not a good gauge i guess |
| 23:30.51 | PTG1234 | then use a reliable provider |
| 23:30.52 | CoaxD | Nethab: Also, you got other issues with "true voip providers". NuFone, for example, is one damn good voip provider. I use them quite a bit daily as a part of business |
| 23:31.13 | CoaxD | Nethab: However, NuFone sure as hell aint gonna deliver calls to me when a frickin interlink at Level3 is dead, making it so i cant GET to NuFone ;) |
| 23:31.22 | Nethab | actually i have 3 providers, i even got an old prepay net2phone account in asterisk |
| 23:31.29 | jake | Jer - if you were this persistant about helping newbies, he'd have a lot more business |
| 23:31.45 | PTG1234 | i have never had my voip phone down |
| 23:31.53 | CoaxD | PTG: Wonderful. :) |
| 23:32.03 | JerJer | jake: WTF? i help a lot of newbies |
| 23:32.08 | *** join/#asterisk phsilva (~phsilva@mensa.fsc.ufsc.br) |
| 23:32.11 | jake | define help |
| 23:32.13 | CoaxD | PTG: My only point is that voip over the internet is automatically less reliable than regulated telco |
| 23:32.15 | jake | RTFM |
| 23:32.17 | jake | ? |
| 23:32.18 | JerJer | only the ones that are motivated to help themselves first |
| 23:32.24 | jake | goggle it you f'n idiot |
| 23:32.27 | PTG1234 | "Figure it out your fucking self" :) thats help |
| 23:32.28 | PTG1234 | haha |
| 23:32.40 | jake | this is not your personal search engine |
| 23:32.42 | CoaxD | jake: JerJer helps folks, sir. If you're an idiot, i'm very sure he can't help that. |
| 23:32.43 | jake | ok |
| 23:32.48 | Nethab | that means your a motivator, not a helper |
| 23:32.50 | PTG1234 | hah |
| 23:32.55 | JerJer | if they cannot ask a informed question they don't desirve help |
| 23:33.11 | CoaxD | JerJer: How do I set up my PPP? |
| 23:33.12 | jake | whatever |
| 23:33.13 | Nethab | ok, why does the manager api suck so badly |
| 23:33.25 | three55ml | jake: A Google search for "nufone" speaks for itself ;) |
| 23:33.27 | PTG1234 | JerJer: if they cannot ask a informed question they don't desirve help << i think his point was made :) |
| 23:33.30 | JerJer | CoaxD: http://www.tldp.org/HOWTO/PPP-HOWTO/ |
| 23:33.36 | CoaxD | JerJer: Rock on. Thank you. |
| 23:33.52 | iq | How do you strip out ID3 tags from mp3? http://fibiger.org/mp3tag.html is dead |
| 23:33.57 | CoaxD | JerJer: Now, got any advice for how to best view porn with my 2400bps dialup connection? |
| 23:34.03 | Nethab | why would anyone use ppp when you could pptp or whatever the microsoft proprietary protocol is |
| 23:34.11 | CoaxD | JerJer: (After I get my PPP to work, of course) |
| 23:34.20 | JerJer | at &f &d1 |
| 23:34.31 | CoaxD | JerJer: I got this application that says "SPEED UP YOUR INTERNET CONNECTION". How do I install it? |
| 23:34.49 | JerJer | type deltree windows in a C:\ prompt |
| 23:34.55 | Syncros | cat /dev/urandom |
| 23:34.57 | jake | CoaxD: It's not always like that |
| 23:34.57 | CoaxD | JerJer: Will do! Thank you. |
| 23:34.58 | Nethab | first hang your modem from an electric fence |
| 23:35.00 | Nethab | then pee on it |
| 23:35.10 | jake | and i'm sure you know that |
| 23:35.21 | *** join/#asterisk jalsot (~tamas@abacus.eworldcom.hu) |
| 23:35.22 | CoaxD | jake: Dude i dunno man. I'm just a newbie |
| 23:35.47 | CoaxD | JerJer: Why won't my voip work on my 2400 modem? I thought my 386 would do voip cuz i read this website and it said voip was fast? |
| 23:36.01 | JerJer | run LPC-10 |
| 23:36.10 | CoaxD | JerJer: Oh yeah. because i need a PPP connection. thats right. You told me that yesterday |
| 23:36.24 | jalsot | hi |
| 23:36.26 | CoaxD | JerJer: Dude. LPC-10. Can I buy that at Best Buy? |
| 23:36.38 | iq | Question: Anyone know how to strip out ID3 tags from mp3 for MusicOnHold? http://fibiger.org/mp3tag.html is not working |
| 23:36.39 | CoaxD | JerJer: And does it run on windows? |
| 23:36.48 | jake | CoaxD - it's a general * channel - not an expert channel |
| 23:36.50 | CoaxD | JerJer: (My windows says "WINDOWS 3.1" |
| 23:36.57 | Nethab | the answer then would be buy a $1000 dollar bandpass filter and limit your voice to 1khz tones then have lpc compress it |
| 23:37.13 | CoaxD | jake: Whats * |
| 23:37.20 | Nethab | * is an asterisk |
| 23:37.22 | jake | go RTFM |
| 23:37.25 | CoaxD | hmm |
| 23:37.25 | jake | lol |
| 23:37.33 | Nethab | & is an and |
| 23:37.35 | jake | you f;n loser |
| 23:37.35 | CoaxD | what means asterisk? |
| 23:37.45 | Nethab | >*< is a cat butt |
| 23:37.52 | jake | isn't that how to handle the questions? |
| 23:37.56 | CoaxD | my cat doesnt have a butt like that |
| 23:38.09 | Nethab | that was a bolo reference |
| 23:38.23 | CoaxD | how did i get here? |
| 23:38.26 | Nethab | ah bolo the first IP multiplayer game |
| 23:38.32 | CoaxD | am i in the wrong place? |
| 23:38.41 | zen-froglet | (.)(.) <= nice hooters |
| 23:38.52 | Nethab | yes you put a * after your rm -r |
| 23:39.07 | CoaxD | in my windows? |
| 23:39.13 | Nethab | yes |
| 23:39.22 | jake | * like *.* |
| 23:39.27 | CoaxD | oh |
| 23:39.32 | convey | anoyne using broadvoice? |
| 23:39.33 | CoaxD | So like a smiley face only the eyes right |
| 23:39.33 | Nethab | no like deltree * |
| 23:39.33 | jake | almost boobies |
| 23:39.38 | Nethab | i use broadvoice |
| 23:39.39 | CoaxD | convey: no, they've been down for 6 months |
| 23:40.21 | convey | I haven't used them in a while. It seemd to work earlier. |
| 23:40.54 | convey | Now my system answers but I can't hear the greeting. Any ideas? |
| 23:41.07 | zen-froglet | turn up the volume ? |
| 23:41.19 | zen-froglet | or the greeting is not playing |
| 23:41.35 | *** join/#asterisk jabbzy (~dygup@noiseboys.force9.co.uk) |
| 23:41.59 | Nethab | i noticed after they went down i get better caller id |
| 23:42.31 | zen-froglet | JerJer: is there anyway i can debug the BRI to see any activity ? |
| 23:43.01 | zen-froglet | even the slightest crackle on the line |
| 23:43.08 | harryvv | what file in asterisk looks for cdr_mysql.conf? trying to get this cdr to work properly and it says cdr_mysql: cannot connect to database server localhost. Call will not be logged |
| 23:43.11 | jake | why not create a seperate channel for asterisk newcomers and convince Digium to show it on their page instead of this channel? |
| 23:43.29 | Nethab | #asterisk-noobs |
| 23:43.33 | jake | right |
| 23:43.40 | convey | I see the greating played in the CLI but I hear nothing |
| 23:44.03 | jake | anyone else with me on that? |
| 23:44.08 | Nethab | i think the idea is if they're smart enough to figure out how to irc they must be smart enough to ask questions |
| 23:44.22 | jake | we know that is not the case |
| 23:44.24 | Nethab | that assumption is wrong |
| 23:44.44 | Nethab | i think they should have to dcc the secret password to the bot |
| 23:44.59 | Nethab | that would rule out all the NAT problem questions |
| 23:45.05 | jake | just don't think the proper route is to get cursed out by Jeremy for not having a clue |
| 23:45.49 | *** join/#asterisk UBiQUiTY (~mirke@user-12lcl1s.cable.mindspring.com) |
| 23:46.01 | jalsot | can anybody tell me what are good and acceptable results for zttest on a TE100 and TE110? |
| 23:46.10 | jake | if I were in his position, I would use every oppurtunity as a sales oppurtunity as his partner does |
| 23:46.28 | jake | after all Jeremy - you do VOIP termination - lots of newcomers need that |
| 23:46.47 | Nethab | oh he wants to terminate them all right |
| 23:46.55 | jake | hehe |
| 23:47.10 | Nethab | i think he doesn't want customers who ask questions like "How do i plug in this PCI card" |
| 23:47.22 | jake | they can call digium for that |
| 23:47.39 | Nethab | that never stopped them from calling me though |
| 23:47.42 | jake | Digium provides free support |
| 23:47.55 | Nethab | cause i'm the phone number they know answers |
| 23:48.00 | Nethab | at least as long as broadvoice is up |
| 23:48.25 | jake | ok - bet you got a lot of customers from Jeremy :) |
| 23:48.39 | Nethab | no, cause i don't have a business |
| 23:48.49 | Nethab | i just have friends and family, which is worse |
| 23:49.10 | jake | oh - ok - thought you were saying you did official Broadvoice support |
| 23:49.22 | Nethab | no i gave them all my broadvoice number |
| 23:49.26 | jake | ok |
| 23:49.38 | Nethab | so if they call, and it doesn't work they know not to bother |
| 23:49.50 | jake | that makes sense |
| 23:50.00 | *** join/#asterisk iq (~iq@63-230-47-233.omah.qwest.net) |
| 23:51.45 | Nethab | which reminds me, anyone have a project in Silicon Valley |
| 23:52.19 | zen-froglet | harryvv: you sure the at the mysqld is running correctly ? |
| 23:52.19 | Nugget | "a project"? |
| 23:52.32 | Nethab | yeah da projects boyyeeee |
| 23:52.41 | Nugget | 'fo sheezy |
| 23:52.50 | *** join/#asterisk gambolputty (~gambolput@cblmdm65-221-51-80.buckeye-express.com) |
| 23:52.59 | Nethab | now has anyone seen my pants they seem to have fallen off my ankles |
| 23:53.08 | jabbzy | ? |
| 23:53.24 | alt | Nethab: I saw them hanging off the tree outside your balcony |
| 23:53.40 | Nethab | i live on the first floor, so that would make sense |
| 23:53.40 | jabbzy | have you tried soft hangup? |
| 23:54.13 | Nethab | soft hangup, is not as fun as transfering them to an echo test |
| 23:54.26 | jabbzy | what the trousers? |
| 23:54.38 | Nethab | oh i thought you meant ex girlfriends |
| 23:55.16 | jabbzy | incidentally, has meetme changed its config? the adminpin don't seem to take? |
| 23:55.31 | alt | speaking of transferring to an echo test: I have an amusing story |
| 23:56.12 | zen-froglet | JerJer: this zaptel card just does not want to answer anyting, any other idea on what could possible be a problem ? |
| 23:56.42 | alt | this company was sending us calls and we hadn't agreed to terminate the calls. So after a month or so of trying to get them to stop sending the calls (which we were rejecting anyhow), one of the guys says, 'fine. if we can't get them on the phone, maybe their customers can' and terminates the calls to a 1kHz test tone. |
| 23:56.47 | alt | :) |
| 23:57.00 | jake | ouch |
| 23:57.02 | alt | needless to say, the traffic has ceased :) |
| 23:57.24 | alt | took about 4 hours. |
| 23:57.27 | jake | zen - do you see the call come in on the asterisk CLI? |
| 23:57.50 | zen-froglet | jake: not at all, |
| 23:58.01 | *** join/#asterisk da-manFL (~claude_cu@adsl-065-006-172-248.sip.mia.bellsouth.net) |
| 23:58.17 | zen-froglet | jake: i can dial out with the card, but am not seeing a single thing incomming *8( |
| 23:58.50 | zen-froglet | i would kill to find another way to diag the problem |
| 23:59.06 | iq | Hi, Is the process mpg123 always running even when no one is on hold??? |
| 23:59.16 | jake | zen - not sure if pri intense debug works with BRI |
| 23:59.16 | Nethab | it shouldn't |
| 23:59.25 | Nethab | but it has a habit of hanging and sticking around |
| 23:59.32 | zen-froglet | jake: set that already, still nothing. |
| 23:59.40 | iq | Nethab, might be coz the mp3 I'm using still have ID3 tags in it? |
| 23:59.55 | zen-froglet | Enabled EXTENSIVE debugging on span 1 |