| 00:00.18 | Druken | isn't that a stupid question... isn't drmac a nickname? |
| 00:00.38 | shido | messages_uri: 693000 |
| 00:00.40 | shido | err |
| 00:00.45 | shido | http://pastebin.ca/17659 |
| 00:00.49 | shido | bdunn, check out http://pastebin.ca/17659 |
| 00:01.30 | shido | of course u need to add 3000 in voicemail.conf |
| 00:01.31 | shido | :) |
| 00:04.53 | dasenjo | Hi to all! Im getting a "Everyone is busy/congested at this time" notice .. but I don't know how to debug it to identify where is the Dial cmd that is producing it ... any suggestion ? |
| 00:05.44 | riksta | sip/iax2 debug |
| 00:07.54 | darwin35 | MikeJ did it I saw him |
| 00:08.09 | Hmm-home | heh, look it's shido |
| 00:08.47 | dasenjo | riksta, thanks, I have so many SIP exts ... Is there always a "Response: Error" asociated with this notice? |
| 00:09.17 | riksta | you can enable debug on just one ip |
| 00:09.33 | darwin35 | MikeJ you alive |
| 00:10.40 | dasenjo | riksta, my problem is that I can't identify the SIP ext that is producing the error .. so I can't choose an ip/peer .. |
| 00:11.47 | riksta | paste some debug output to the pastebin |
| 00:12.06 | Micc | How do I turn off these debug messages? I called digium support and the guy went in and turned on some debuggin and I'm not sure how to turn it off. Its not sip debug its like all debug output. |
| 00:12.18 | Hmm-home | no debug <tech> |
| 00:12.27 | Hmm-home | er.. lemme try that again |
| 00:12.31 | bdunn | What is wrong with this: exten => 4001,1,Dial(IAX2/account#:password@gwiaxt01.voicepulse.com/18005551212) ? Shouldn't that go out on the AIX connection to VoicePulse and dial 18005551212? |
| 00:12.31 | Hmm-home | <tech> no debug |
| 00:12.38 | riksta | yeh |
| 00:12.57 | bdunn | IAX... old habit |
| 00:13.35 | *** join/#asterisk iq (~iq@65-103-165-101.omah.qwest.net) |
| 00:13.39 | Micc | Hmm-home, its not sip, its not zap and its not iax2 so what else is there? I'm seeing chan_sip and acl.c messages. |
| 00:14.03 | Hmm-home | flooding the screen? |
| 00:14.17 | *** join/#asterisk evilrabbi (~evilrabbi@ip68-97-70-223.ok.ok.cox.net) |
| 00:14.26 | Micc | yeah |
| 00:14.40 | Micc | I tried debug level 0 too and it hasn't stoped. |
| 00:14.44 | Hmm-home | turn your monitor off? |
| 00:14.52 | unabonger | who can figure out my parkingtime => not working right problem |
| 00:15.39 | Hmm-home | set verbose 0 |
| 00:15.41 | *** join/#asterisk jlewis (~jlewis@solo.atlantic.net) |
| 00:16.21 | jlewis | my ATA186 seems to have quit...and the top red light just flashes continuously...anyone know what that means? |
| 00:16.31 | Micc | I thought that get overriden with -vvv which is what I normally use. |
| 00:16.47 | Hmm-home | yeah Micc I don't know.. was just throwing that out there |
| 00:17.03 | Hmm-home | jlewis, power cycle it and check your settings |
| 00:17.05 | Micc | Yeah, it goes away with verbose level 0 |
| 00:17.14 | Micc | but then I don't see what I used to see. |
| 00:17.15 | jlewis | that was the first thing I tried |
| 00:17.43 | Hmm-home | and all the settings are correct? |
| 00:17.44 | *** join/#asterisk MustDie (voip@205.247.13.252) |
| 00:18.19 | jlewis | can't mess with the settings...it's not pingable...but it keeps spewing CDP broadcast packets |
| 00:18.30 | Hmm-home | no voice menu config? |
| 00:19.52 | jlewis | I've never used that (at least not that I remember) |
| 00:19.58 | Hmm-home | try it |
| 00:20.17 | Hmm-home | pick up the phone and hit the big red button, ask for commissioner gordon |
| 00:21.26 | *** join/#asterisk buddah (~hnic@208.179.86.5) |
| 00:21.53 | Hmm-home | (21, 22, 23) == (ip, default route, subnet) if memory serves |
| 00:22.05 | jlewis | its unresponsive |
| 00:22.12 | jlewis | I just get dead air |
| 00:22.17 | *** part/#asterisk unabonger (BhongwanSh@66.228.196.216) |
| 00:22.23 | buddah | i have a question about faxing. i am able to send t.38 fax from a grandstream ata 486, through asterisk fine no problem, but incoming doesnt work. any idea what would stop incoming? i keep getting an NG: poor line condition result on incoming |
| 00:22.55 | Hmm-home | is the fax getting reinvited one way but not the other? |
| 00:23.17 | buddah | also, on the ata's sip.conf entry, i have disallow=all, allow=ulaw. but when the fax bridges, it uses a g729 liscence, so i think its trying to push it g729 |
| 00:23.28 | buddah | how could it be doing that if i have it only to allow ulaw? |
| 00:23.53 | buddah | or is it the entry in extensions.conf that will fix it? |
| 00:24.16 | Hmm-home | you sure it's not coming in g.729 and going to the ata ulaw? |
| 00:24.27 | buddah | ahh, could be |
| 00:25.23 | buddah | well the incoming is originating from PSTN |
| 00:25.41 | buddah | nevermind |
| 00:27.17 | *** join/#asterisk mog_home (~mogorman@user-24-236-84-48.knology.net) |
| 00:27.39 | Hmm-home | hmm, same mog that hangs out on fdfnet? |
| 00:27.44 | *** join/#asterisk JunK-Y (~junky@Toronto-HSE-ppp3743078.sympatico.ca) |
| 00:28.00 | mog_home | ? |
| 00:28.07 | mog_home | no |
| 00:28.14 | mog_home | mog from digium |
| 00:28.20 | Hmm-home | ahh |
| 00:29.07 | buddah | god i wish faxing wasn't such a pain |
| 00:29.10 | shido | ZzzZZ |
| 00:29.13 | shido | its not a pain |
| 00:29.36 | Hmm-home | specially not over a pstn line |
| 00:29.54 | buddah | if its like this, could it be messing it up. pstn --> cisco gw --g729--> * --ulaw--> ata 486? |
| 00:29.57 | buddah | cus it looks like thats whats going |
| 00:30.29 | Hmm-home | could be, why don't you confirm that |
| 00:30.44 | bdunn | Is it possible to have a local extension dial an outside number - something like a speed dial? |
| 00:30.56 | Hmm-home | yes |
| 00:31.43 | bdunn | Hmm-home Everything I am seeing is about setting it up on the phone. Can you give me a hint so I can find this please? |
| 00:31.44 | shido | hrmm |
| 00:31.48 | shido | im tempted to send a fax no |
| 00:31.49 | shido | now |
| 00:32.09 | Hmm-home | I got an old record player shido, i'll sell it to you for 10 bucks |
| 00:32.53 | wunderkin | can someone here check a couple core files for me, or should i post it to the list? |
| 00:33.32 | Hmm-home | make a call and during the call sip show channels |
| 00:33.48 | JunK-Y | wunderkin: core file? cause u got any core dump, in which context? |
| 00:34.45 | Juggie | how do i create a patch |
| 00:34.52 | wunderkin | JunK-Y: hmm...? yeah i have a couple of core dumps.. one from 6-14-04 head and 7-11-04 head.. i know june is old but this in production |
| 00:34.55 | Juggie | if i have two versions of a file, how do i create a diff |
| 00:35.04 | JunK-Y | Juggie: cvs diff -u filename |
| 00:35.28 | JunK-Y | this is too old, get a fresh copy no? |
| 00:35.41 | wunderkin | me? |
| 00:35.45 | JunK-Y | ya |
| 00:35.53 | wunderkin | yeah well i got it with 7-11 too |
| 00:36.13 | JunK-Y | its like 9 months old. |
| 00:36.22 | wunderkin | oh i mean 05 haha |
| 00:36.39 | JunK-Y | ha, that makes more sense :) |
| 00:36.46 | JunK-Y | just pastebin the back trace |
| 00:36.51 | wunderkin | i have the flu.. still have a bit of a fever .. not thinking clearly! |
| 00:36.59 | wunderkin | i didnt think that was right haha |
| 00:37.03 | wunderkin | ok |
| 00:37.32 | shido | anyone have a fax machine I can fax to? |
| 00:37.59 | Hmm-home | heh, no.. since you didn't even reply to my smartass comment |
| 00:39.37 | bdunn | Hmm-home - I did that... sip show channels. Still can't work that one out. Keep getting Jedi Extension Trick. exten => 3005,1,Dial(IAX2/username:password@gwiaxt01.voicepulse.com/18173664284) |
| 00:39.39 | gravemind | it's here... |
| 00:39.44 | gravemind | brand shiny new pap2-na |
| 00:40.03 | bdunn | Hmm-home - Tried quotes, putting in my SIP extension, etc. |
| 00:40.54 | Hmm-home | haha I think we got our conversations crossed bdunn |
| 00:40.59 | Hmm-home | what is your problem? |
| 00:41.08 | bdunn | Oh... heh... but it seems like a pretty good hint. |
| 00:41.17 | *** join/#asterisk da_monumental_1 (~da_monume@rrcs-24-172-102-198.midsouth.biz.rr.com) |
| 00:41.19 | Hmm-home | that was for buddah |
| 00:41.35 | bdunn | Basically I want to setup things so that dialing 3005 will dial an external number 8173664284 (cell phone) via the AIX connection to Voice Pulse. |
| 00:41.46 | Hmm-home | aix? |
| 00:41.53 | bdunn | Sorry.... IAX. :-) |
| 00:41.55 | Qwell | * runs on aix? |
| 00:42.16 | bdunn | I'd never try it... AIX is... well, the future doesn't look too great at IBM. |
| 00:42.18 | wunderkin | JunK-Y: http://pastebin.ca/17662 and http://pastebin.ca/17663 - i changed the phone number on the channel to X |
| 00:42.44 | gravemind | damn... tiny. |
| 00:43.30 | bdunn | I can see how this is done with Zap, but not IAX... can't find anything that works. |
| 00:43.35 | Hmm-home | why are you sending username/password in the extension and not setting it in iax.conf? |
| 00:43.43 | bdunn | It is in aix.conf. |
| 00:43.49 | bdunn | Hmmm... lemme try something. |
| 00:44.03 | Hmm-home | then why are you sending it in extensions.conf |
| 00:44.19 | infinity1 | let the fun begin |
| 00:44.43 | *** join/#asterisk CleanerX (~nix@nat-ph3-wh.rz.uni-karlsruhe.de) |
| 00:45.04 | bdunn | So... if ZAP calls are like exten => 3005,Dial(Zap/g1/8173664284) then I would put in exten => 3005,Dial(IAX2/g1/8173664284)?? I'm not sure I understand the g1 part. |
| 00:45.11 | Hmm-home | no |
| 00:45.13 | Hmm-home | that is wrong |
| 00:45.26 | Qwell | You need a priority |
| 00:45.48 | bdunn | exten => 3005,1,Dial(IAX2/g1/18173664284) ? |
| 00:45.52 | Hmm-home | did you follow the wiki? |
| 00:46.05 | fluidicsl | what do I need to add to my dial plan to my my zap line answer a call |
| 00:46.08 | bdunn | The wiki tells me all about how to do this with phones... can't find the info for the extensions.conf. |
| 00:46.15 | Hmm-home | sure there is dude |
| 00:46.38 | Hmm-home | http://www.voip-info.org/tiki-index.php?page=Asterisk+voicepulse+connect bdunn big section labeled outbound dialing |
| 00:46.49 | bdunn | Of course... I'm about 4 days into Asterisk. :-) Haha.... LOTS to learn. |
| 00:46.53 | bdunn | I'll check the link. Thanks! |
| 00:47.05 | fluidicsl | yeah |
| 00:48.42 | fluidicsl | I am trying to get a zap line to answer a call. what should I add in the exstentions.conf file ? |
| 00:48.44 | TripleFFF2sdf | fordays into asterisk = 4 lines |
| 00:48.57 | TripleFFF2sdf | or you up to the # this is a comment still ;) |
| 00:48.59 | Qwell | four days into asterisk = 4 words |
| 00:49.00 | Hmm-home | fluidicsl somewhere for the incoming call to go? |
| 00:49.05 | Micc | Hmm-home, he edited my logger.conf |
| 00:49.21 | bdunn | Hmm-home - That works for dialing outside lines, but how do I link an extension number like 3005 to dial an external number like 18173664284? ? |
| 00:49.34 | Hmm-home | same concept there guy |
| 00:49.44 | TripleFFF2sdf | ? |
| 00:49.47 | fluidicsl | I can call out on the zap line but where do I put it in my dial plan |
| 00:50.01 | fluidicsl | I have a context for inbound stuff but what should it look like |
| 00:50.03 | Hmm-home | _1NXXNXXXXXX,1,Dial,IAX2/Abc1dEF2GH@voicepulse/<1900jimmyjunk> |
| 00:50.11 | TripleFFF2sdf | like .. heu... exten->3005,1,dial(iax2@someshit/1877blahblah) |
| 00:50.15 | fluidicsl | the zap line that is |
| 00:50.44 | Micc | fluidics1, it comes in on the context you specify and the extension of the phone number dialed. |
| 00:51.21 | fluidicsl | its a zap line so it gets the extention of my actual telephone number ? |
| 00:51.53 | Micc | fluidcis1, so for me I add exten => 2069731073,1,Goto(context,s,1) |
| 00:51.59 | bdunn | DAMN! I swear to God I did that before and it didn't work. Oh well... thanks a lot guys. Another issue solved. This stuff is great. |
| 00:52.13 | fluidicsl | is that for a zap line or a voip line ? |
| 00:52.31 | Hmm-home | bdunn: keep your smile one when you're sitting there at 1am swearing up and down at some problem you can't figure out |
| 00:52.32 | Micc | fluidics1, if you enter verbose mode you'll see what extension and context it is trying to enter. |
| 00:53.01 | bdunn | Heheh... I LOVE this stuff. It's a wonderful and neverending new gadget. |
| 00:53.05 | *** join/#asterisk CpuID (~nathan@dsl-202-173-176-82.qld.westnet.com.au) |
| 00:53.11 | Hmm-home | yeah it has it's moments |
| 00:53.36 | CpuID | hey ppls, ive got some weirdass issues, iax calls that just drop voice both ways for like 5 seconds at a time, at random intervals |
| 00:53.39 | CpuID | suggestions? |
| 00:53.53 | Hmm-home | using trunking? |
| 00:54.32 | CpuID | this is when trying cisco 7960 (ulaw) <-local-> asterisk-office <------------net----------------> asterisk-home <-zaptel-> cordless |
| 00:54.41 | CpuID | from memory trunking is off atm |
| 00:54.47 | CpuID | this is when only trying 1 call simultaneously... |
| 00:54.58 | CpuID | doesnt trunking only have a benefit with multiple calls? |
| 00:55.21 | Hmm-home | yeah... but ... nm, |
| 00:55.44 | Hmm-home | sounds like it might be a timing issue |
| 00:55.49 | CpuID | timing, as in? |
| 00:56.14 | CpuID | http://lists.digium.com/pipermail/asterisk-dev/2003-May/000666.html |
| 00:56.18 | gravemind | 'tis working |
| 00:56.20 | CpuID | you know that there explains it pretty well |
| 00:56.21 | gravemind | got into the setup thingy |
| 00:56.24 | CpuID | iax2 with gsm |
| 00:56.30 | CpuID | ive had it with ilbc too |
| 00:57.50 | Katty | Hmm-home: mew |
| 00:58.11 | Hmm-home | hey Katty |
| 00:58.27 | Katty | Hmm-home: my bed is assembled :> |
| 00:58.36 | Katty | Hmm-home: and i only got one scratch :>> |
| 00:58.40 | gravemind | erm... |
| 00:58.41 | gravemind | hmm. |
| 00:58.45 | Hmm-home | cool, get a new one? |
| 00:58.56 | Katty | ya, wrought iron black sleigh bed |
| 00:59.08 | Katty | rail caught the right thigh :< |
| 00:59.08 | Hmm-home | cool |
| 00:59.17 | Hmm-home | ouch |
| 00:59.19 | Katty | big scratch going across it |
| 00:59.23 | Katty | i'm ok (= |
| 00:59.43 | Hmm-home | good deal |
| 00:59.50 | gravemind | oh. duh. |
| 01:00.10 | Katty | my bank account is currently recovering ;) |
| 01:00.20 | Katty | it doesn't like dropping a couple grand in a single day |
| 01:00.29 | gravemind | ouch |
| 01:00.34 | Hmm-home | heh, mine either |
| 01:01.06 | Katty | we could open a joint account and collect 50 cents more interest :P |
| 01:01.19 | Katty | we could each get an orange soda :>>> |
| 01:01.22 | gravemind | heh |
| 01:01.26 | Hmm-home | mmmm, or one of those sticky hands |
| 01:01.28 | gravemind | pap2s come with one g729 license |
| 01:01.30 | gravemind | but it has two ports |
| 01:01.37 | gravemind | so you can only use g729 on one of the two :P |
| 01:01.37 | Katty | Hmm-home: oooh, neat! |
| 01:01.51 | Hmm-home | I want a blue one |
| 01:01.55 | gravemind | orange soda? sounds tasty. |
| 01:02.09 | Katty | tis |
| 01:02.16 | Katty | especially when chilled |
| 01:02.20 | Katty | and poured on.............. |
| 01:02.21 | Katty | err |
| 01:02.22 | Katty | nevermind |
| 01:02.25 | infinity1 | is there a difference in sound qulaity on the polycom 500 vs 600 |
| 01:02.32 | Hmm-home | iced cream |
| 01:02.35 | Katty | yeah, i'm thinking purple |
| 01:02.41 | Katty | Hmm-home: exactly. except soy |
| 01:02.49 | Katty | Hmm-home: cause soy ice cream isn't MURDER |
| 01:02.54 | Katty | </sarcasm> |
| 01:03.19 | Katty | dun dun dun |
| 01:03.31 | Katty | Hmm-home: you really need to change this light bulb for me |
| 01:03.34 | Katty | i can't reach it |
| 01:03.35 | snewpy | infinity1: no, there isn't.. at least not noticable |
| 01:03.39 | Hmm-home | katty in the library with a milk shake |
| 01:03.51 | Katty | Hmm-home: soy milk shake, thankyouverymuchkthxbi |
| 01:04.04 | Hmm-home | haha a lame joke gone un laughed at |
| 01:04.05 | fluidicsl | can you keep an exstention from emidiatly going to the s exstention ? |
| 01:04.12 | Katty | Hmm-home: ;) |
| 01:04.24 | Hmm-home | haven't you ever played 'clue' ms. |
| 01:04.33 | Katty | of course i have |
| 01:04.33 | infinity1 | snewpy: k. i'll go for the 500. i don't see a good reason for 600 |
| 01:04.37 | Katty | but i prefered in the kitchen |
| 01:04.37 | infinity1 | tnx |
| 01:04.39 | Katty | with a candle stick |
| 01:04.44 | Katty | err, no that's file |
| 01:04.46 | Hmm-home | <chuckle> |
| 01:04.51 | Katty | kitchen candlestick...yeah that's definately file |
| 01:05.02 | Hmm-home | someone seriously needs to write an ip enabled version of clue |
| 01:05.05 | buddah | awesome |
| 01:05.14 | buddah | incoming/outgoing t.38 |
| 01:05.16 | buddah | i'm happy now |
| 01:05.31 | fluidicsl | is there any way to keep incomeing calls from automaticly going to the s exstention of a given context ? |
| 01:06.13 | Katty | Hmm-home: they have monopoly now |
| 01:06.23 | Hmm-home | exten => s,1,goto(new_context,s,1) |
| 01:06.28 | Damin | 996? |
| 01:06.36 | Hmm-home | hmm there is an ip version of clue... sweet |
| 01:06.42 | fluidicsl | yeah but I dont want it to go to s,1 in the first place |
| 01:06.51 | infinity1 | snewpy: is $180 good for a 501 |
| 01:06.52 | Hmm-home | why? just send it somewhere else |
| 01:07.00 | Hmm-home | haha and I have it! |
| 01:07.18 | Hmm-home | monopoly would be fun |
| 01:07.21 | Damin | inifinity: That is new pricing for one, yeah.. |
| 01:07.23 | Hmm-home | we could get an all day game going |
| 01:07.27 | snewpy | infinity1: yes, it is |
| 01:07.39 | fluidicsl | becuse I dont want anything on the s exstentin in my inbound context |
| 01:07.46 | snewpy | infinity1: where from? |
| 01:07.57 | infinity1 | snewpy: pcnation.com |
| 01:08.07 | infinity1 | snewpy: know a better place? |
| 01:10.49 | Katty | boo! |
| 01:10.57 | Katty | Hmm-home: i can't reach the light :< |
| 01:11.18 | Katty | :> |
| 01:11.34 | Katty | mirc? |
| 01:11.36 | Katty | :< |
| 01:11.54 | Hmm-home | i'm using mirc yeah |
| 01:12.01 | infinity1 | damn. you can get polycom 500's even cheaper. |
| 01:12.20 | Hmm-home | can't run my snes emulator in linux |
| 01:12.42 | snewpy | infinity1: most of the cheap ones are "authorized only".. ie you have to be polycom reseller |
| 01:13.13 | infinity1 | snewpy: should i care? |
| 01:13.19 | Katty | Hmm-home: oh.j |
| 01:13.23 | Katty | Hmm-home: k |
| 01:13.36 | infinity1 | snewpy: i see 500's are cheaper than 501s. i'm looking to see what the difference is. |
| 01:13.42 | snewpy | infinity1: sure, because you won't be able to buy it :) |
| 01:13.48 | Hmm-home | never got tv out to work right with my graphics card either :( |
| 01:14.03 | Katty | :< |
| 01:14.08 | Katty | Hmm-home: it requires hugging |
| 01:14.10 | snewpy | infinity1: the 501 has extra flash memory.. it's the new version of the 500, and the 500 will be EOL'ed and eventually stop getting updates long before the 501 does |
| 01:14.29 | infinity1 | snewpy: guess i should go with the 501 |
| 01:14.33 | Hmm-home | just easier all around to have windows on this machine |
| 01:14.53 | snewpy | infinity1: check out http://www.telephonyware.com/telephonyware/tw00176.html for a list of features of the 501 |
| 01:14.59 | *** join/#asterisk _DAW (~bob@68-114-110-210.dhcp.slid.la.charter.com) |
| 01:18.22 | infinity1 | <PROTECTED> |
| 01:18.31 | _DAW | HI everyone |
| 01:19.37 | Hmm-home | yo |
| 01:22.29 | _DAW | Anyone here using Adit600 w/ *? |
| 01:23.37 | Hmm-home | i'm sure a lot of people are, but its pretty slow in here right now |
| 01:23.51 | Hmm-home | the mailing list might be a good place to look |
| 01:24.17 | _DAW | yeah.. I noticed. I am actually looking for the manual. CAC is taking their sweet time getting me my account info. |
| 01:24.49 | Hmm-home | might try some p2p, google etc.. |
| 01:25.12 | CpuID | ok, changed jitterbuffer to 1, will get some feedback over the next 1-2 days about my iax2 dropouts |
| 01:25.14 | CpuID | see if that helps |
| 01:25.21 | Hmm-home | Katty if you're around I could use some input on an IP500 |
| 01:25.39 | *** part/#asterisk mansing (~chatzilla@250-116.customer.cloud9.net) |
| 01:25.43 | infinity1 | i think i need a Promise SATAII150 SX8 |
| 01:25.49 | _DAW | hmm-home - what you need on IP500? |
| 01:25.50 | *** part/#asterisk Cybertoy (~Cybertoy@ool-457852fa.dyn.optonline.net) |
| 01:25.54 | _DAW | we use lots |
| 01:26.06 | infinity1 | _DAW: ya. i'm buying a 501 |
| 01:26.20 | Hmm-home | cool, i'm quoting a build tomorrow that's price sensitive but requires ip phones |
| 01:26.20 | Nugget | Levi's 501 Blues. |
| 01:26.20 | _DAW | good stuff |
| 01:26.39 | Hmm-home | cisco is to expensive |
| 01:26.50 | *** join/#asterisk SarahEmm (~sarahemm_@MTL-ppp-159032.qc.sympatico.ca) |
| 01:26.53 | Hmm-home | so i'm considering going with the IP500 |
| 01:26.58 | SarahEmm | mewhi |
| 01:27.19 | _DAW | they are a great choice, and I think you will find that the voice quality is superior to even the 7960 |
| 01:27.32 | infinity1 | i want to build a new server also. damn 1ghz crap sucks. |
| 01:27.35 | snewpy | Hmm-home: get the 501 instead... it's the updated model.. more flash |
| 01:27.48 | snewpy | same price |
| 01:27.52 | Hmm-home | is the speaker phone everyone says it is? |
| 01:27.59 | _DAW | and then some.. :) |
| 01:28.02 | Hmm-home | heh updated isn't always better |
| 01:28.05 | snewpy | Hmm-home: the speaker phone is incredible |
| 01:28.22 | snewpy | Hmm-home: no difference other than extra flash memory for larger firmware.. other than that it's the same as the IP500 |
| 01:28.24 | _DAW | 5021 is a just as good but like snewpy has room for all the new upcomming features |
| 01:28.35 | _DAW | i mean 501 |
| 01:28.51 | Hmm-home | cool i'll check that one out, this is a small setup 5-10 phones |
| 01:28.57 | Hmm-home | vonage incoming |
| 01:29.20 | SarahEmm | woo, i in theory have a 647 DID :) |
| 01:29.27 | Hmm-home | damn raid card is almost as expensive as the rest of pc <chuckle> |
| 01:30.04 | Hmm-home | rock on SarahEmm |
| 01:30.39 | infinity1 | where can i get a 501 shipped for 180-185? |
| 01:30.58 | Hmm-home | they are 190 at atacomm |
| 01:31.00 | infinity1 | freakin every site adds a charge right before checkout. i'm noy buying from assholes like that. its the principal |
| 01:31.24 | Qwell | like shipping or tax? |
| 01:31.32 | Hmm-home | heh I didn't notice they were in minneapolis |
| 01:32.29 | infinity1 | last minute they add a "handling" fee |
| 01:33.17 | Nugget | shopping based on price alone is not the best approach. |
| 01:33.33 | Nugget | you end up buying from only the shiftiest and least reputable places |
| 01:33.57 | *** join/#asterisk cp5 (~samy@adsl-68-123-234-50.dsl.irvnca.pacbell.net) |
| 01:34.03 | infinity1 | Nugget: got a suggestion? |
| 01:34.12 | _DAW | We worked very hard to establish a relationship with a distributer that helped us get Polycom Certified, otherwise you will not have access to firmware or support.. :( |
| 01:34.21 | cp5 | if i have a patch to contribute, can i just send it to asterisk-dev@lists.digium.com and attach it? |
| 01:34.58 | harryvv | DAW, got the ip500 working but of course, other things in the files need modified. |
| 01:35.01 | JunK-Y | cp5: bugs.digium.com |
| 01:35.09 | cp5 | Junk-y, k, cool |
| 01:35.14 | snewpy | nugget is right... buy it from someone who actually knows what they are doing, and will support you, and help you replace it if there's a problem, etc.... that kind of service is worth far more than the few bucks you're going to save buying from the cheapest place around |
| 01:35.35 | JunK-Y | report it there, just add [patch] foobar as summary |
| 01:35.37 | cp5 | just wrote a patch to include fxstest's regdump and stats (voltage of zap channels) to asterisk so you can get those without killing asterisk |
| 01:35.38 | *** join/#asterisk mag_um (~mag_um@210.19.250.122) |
| 01:36.06 | cp5 | JunK-Y, it's not actually a bug, more of a feature |
| 01:36.27 | _DAW | Try reviewvideo.com, they are very much in bed with polycom and we have worked with their techs in the past. Once certified the 501's run between 169 and 179. |
| 01:36.52 | infinity1 | Hmm-home: atacomm's site is broke |
| 01:37.02 | JunK-Y | that's why u could specify it via [patch] |
| 01:37.04 | infinity1 | thats what they get for running .nET |
| 01:37.19 | _DAW | harrvv - what types of things? |
| 01:39.58 | *** join/#asterisk PBXtech (~nik@032-274-559.area1.spcsdns.net) |
| 01:40.44 | Hmm-home | yes atacomm's is broke |
| 01:41.10 | infinity1 | voipsupply wants like $17 for shipping. |
| 01:41.57 | snewpy | infinity1: try telephonyware... actually "what it costs" shipping, same price as voipsupply for the ip 501 |
| 01:42.06 | *** join/#asterisk Juggie (~agony@CPE00c049d9f271-CM00137186c8d8.cpe.net.cable.rogers.com) |
| 01:42.28 | PBXtech | anyone try the new echo cancel cards from digium? |
| 01:42.47 | JunK-Y | PBXtech: nope, work great^ |
| 01:42.48 | JunK-Y | ? |
| 01:42.56 | infinity1 | snewpy: wow. they have a way better website than everyone else |
| 01:43.19 | PBXtech | wondering |
| 01:43.20 | infinity1 | i can't believe the quality of the websties selling voip stuff. |
| 01:43.27 | infinity1 | its a joke. |
| 01:43.38 | *** join/#asterisk j4m3s (~debbie@216.207.245.18) |
| 01:44.04 | infinity1 | snewpy: damn. they want 18 for TAX! |
| 01:44.05 | *** part/#asterisk j4m3s (~debbie@216.207.245.18) |
| 01:44.12 | snewpy | you're in CA? |
| 01:44.17 | infinity1 | yea |
| 01:44.21 | *** join/#asterisk j4m3s (~debbie@216.207.245.18) |
| 01:44.33 | Juggie | damn thunder and lightning |
| 01:44.55 | SarahEmm | gah |
| 01:44.59 | SarahEmm | fsck |
| 01:45.01 | SarahEmm | my IP changed today |
| 01:45.06 | SarahEmm | so my DID is broken before i could eve use it |
| 01:45.07 | infinity1 | snewpy: yep |
| 01:45.09 | SarahEmm | *grumbles* |
| 01:45.22 | SarahEmm | this isn't a workable solution. *sighs* |
| 01:45.25 | infinity1 | snewpy: i ain't a crappy state sales tax |
| 01:45.34 | infinity1 | snewpy: er paying a crappy state |
| 01:45.59 | SarahEmm | anyone in channel provide DIDs in area codes 416 or 647? ;) |
| 01:46.22 | snewpy | infinity1: you're buying peace of mind :) |
| 01:46.44 | infinity1 | snewpy: california is a headache |
| 01:46.53 | infinity1 | snewpy: an earthquake needs to sink it. |
| 01:47.06 | snewpy | haha |
| 01:47.09 | snewpy | move to NV |
| 01:47.38 | infinity1 | snewpy: yea. my good friend lives in summerlin |
| 01:47.51 | infinity1 | snewpy: i should follow. |
| 01:47.56 | SarahEmm | do most providers of IAX2 termination require static IPs, or is this just this provider? |
| 01:47.57 | infinity1 | snewpy: what does IT get paid there |
| 01:48.26 | PBXtech | [SarahEmm]: doesnt matter |
| 01:48.30 | SarahEmm | uhh |
| 01:48.32 | SarahEmm | what doesnt matter? |
| 01:48.35 | PBXtech | provider yes |
| 01:48.35 | snewpy | infinity1: can't say I know.. just telecommute with your tax-paid IP 501 :) |
| 01:48.41 | SarahEmm | provider yes? |
| 01:48.42 | SarahEmm | *confused* |
| 01:48.44 | PBXtech | clients dont need static ip |
| 01:48.47 | SarahEmm | uhh |
| 01:48.51 | SarahEmm | my provider requires a static IP |
| 01:48.51 | PBXtech | provider does |
| 01:48.53 | SarahEmm | and doesn't use secrets and such |
| 01:48.59 | SarahEmm | which is useless for me. |
| 01:48.59 | snewpy | SarahEmm: generally not.. a few of the smaller/higher-end ones do |
| 01:49.03 | PBXtech | thats dumb |
| 01:49.07 | SarahEmm | they didn't TELL ME this until they already set it up tho |
| 01:49.14 | SarahEmm | i specifically said i had a dynamic IP at the beginning *growl* |
| 01:49.26 | PBXtech | tell me your ip, so i can spoof it and get free calls |
| 01:49.27 | SarahEmm | so it's entirely possible to do IAX2 termination to a dynamic IP? |
| 01:49.31 | SarahEmm | lol |
| 01:49.32 | PBXtech | yup |
| 01:49.32 | SarahEmm | no :P |
| 01:49.35 | SarahEmm | 'k |
| 01:49.36 | SarahEmm | thought sol |
| 01:49.39 | SarahEmm | gonna yell at provider |
| 01:49.49 | SarahEmm | cancel if they can't do it, because my IP already changed so my DID is broken already |
| 01:50.12 | SarahEmm | sivana, you around? or slePP? |
| 01:50.14 | PBXtech | IAX registers to the server, so it should update all the time |
| 01:50.18 | SarahEmm | err |
| 01:50.40 | SarahEmm | it only registers with the server if you use a secret, no? |
| 01:50.43 | _DAW | PBXtech is right, shouldnt be much different from SIP from a REG standpoint? |
| 01:50.51 | SarahEmm | mine shows Unmonitored when using the config the provider gave me |
| 01:51.01 | SarahEmm | and they specifically said the DID would break if my IP changed, and i'd have to email and they'd update the IP |
| 01:51.03 | file[laptop] | Unmonitored just means qualify isn't enabled |
| 01:51.04 | SarahEmm | which Sucks |
| 01:51.10 | infinity1 | SarahEmm: who is your provider? i'd like to know so i don't sign up with a static ip service |
| 01:51.18 | SarahEmm | xetricom. shido's. |
| 01:51.20 | darylp | yeah, no kidding |
| 01:52.14 | infinity1 | wtf. i thought he knew what was up |
| 01:53.10 | SarahEmm | *fires off an email to them* |
| 01:53.20 | SarahEmm | unless they can terminate properly to a dynamic IP it's useless for m.e |
| 01:53.26 | PBXtech | xetricom.. hmm :) /whois Sarahemm now I got everything i need !!! |
| 01:53.45 | harryvv | anyone here runnign monowall |
| 01:53.49 | SarahEmm | PBXtech: heh. |
| 01:53.53 | SarahEmm | no, because my IP's changed |
| 01:54.02 | SarahEmm | so even *i* don't have access to it |
| 01:54.08 | SarahEmm | anyone with logs could get it tho because it was my old IP :P |
| 01:54.09 | PBXtech | ill try it tomorroe |
| 01:54.14 | PBXtech | just kidding |
| 01:54.20 | SarahEmm | heh |
| 01:54.22 | SarahEmm | meow |
| 01:54.26 | SarahEmm | this is harder than expected. |
| 01:54.33 | SarahEmm | i'd not expected getting a VoIP DID would be so hard.. heh |
| 01:54.33 | PBXtech | they should have a password |
| 01:54.34 | *** join/#asterisk meppl (~mephisto@A7d7b.a.pppool.de) |
| 01:54.35 | darylp | is that supposed to be a security feature? |
| 01:54.37 | fluidicsl | is there a way to make it so that an incomeing call on a zap chan never hits the s exstention ? |
| 01:54.52 | SarahEmm | i have no idea darylp. it defeats the purpose anyway because they don't use secrets, just a hardcoded IP |
| 01:55.09 | darylp | oh, I see, yeah, with no secret how else would you secure it |
| 01:55.27 | _DAW | fluidicsl - have a more specific exten.. |
| 01:55.41 | PBXtech | aparently they think ip is good enough heh |
| 01:56.40 | darylp | well, it's probably not much less secure than secrets in reality, however, it's not useful with a dynamic ip, and it sure seems odd |
| 01:56.54 | SarahEmm | yeah. it does. |
| 01:57.05 | SarahEmm | nobody mentioned this to me until the 'ok, it's all set up! by the way, you can't use a dynamic ip.' :P |
| 01:57.05 | PBXtech | ide rather have md5 than a static ip |
| 01:57.40 | PBXtech | whats the commend in linux to tell what processor is running? |
| 01:57.55 | darylp | well me too |
| 01:58.35 | _DAW | PBXtech: utilization? top |
| 01:58.47 | _DAW | or ps -aux |
| 01:58.47 | infinity1 | PBXtech: cat /proc/cpuinfo |
| 01:58.49 | SarahEmm | PBXtech: cat /proc/cpuinfo |
| 01:58.53 | PBXtech | thx |
| 01:58.59 | infinity1 | SarahEmm: ;) little slow there |
| 01:59.04 | SarahEmm | doh! ;) |
| 01:59.09 | SarahEmm | hey, it's the end of a long day |
| 01:59.16 | SarahEmm | bleh. i *so* need a day off |
| 01:59.23 | infinity1 | SarahEmm: yea. sounds like it. |
| 01:59.28 | JunK-Y | ive friday off :P |
| 01:59.47 | SarahEmm | sat/sun |
| 02:00.51 | WilliamK | =) |
| 02:00.55 | SarahEmm | cool :) |
| 02:01.10 | PBXtech | now to figure out the real MHZ of this thing.. :/ |
| 02:01.22 | *** join/#asterisk bankrupt (~bank@pcp08695394pcs.500ash01.tn.comcast.net) |
| 02:01.54 | WilliamK | =) |
| 02:02.34 | infinity1 | PBXtech: i believe its "MHz" |
| 02:03.47 | PBXtech | yea but that not real (i though) 1.6mgz Opteron not right |
| 02:05.08 | infinity1 | PBXtech: yea. |
| 02:05.11 | Katty | mew |
| 02:06.09 | SarahEmm | WilliamK: heh. i'm doing a similar thing. |
| 02:06.20 | SarahEmm | i work 2200-0800 sat/sun then back on at noon on sun until 2300 =-/ |
| 02:06.30 | SarahEmm | payback for other ppl working my shifts while i'm off to learn to sign |
| 02:08.08 | JunK-Y | when i was studying, i was working from 15hto23h, then from 24h to 8h, was rushing at 7am, trustme. |
| 02:09.08 | SarahEmm | *nods* |
| 02:14.33 | infinity1 | yay. head is talking to me. |
| 02:15.04 | infinity1 | for some reason that sounds wrong. |
| 02:15.13 | file | SarahEmm: KITRICH! |
| 02:15.32 | SarahEmm | mew |
| 02:15.32 | SarahEmm | file! |
| 02:15.36 | file | yay file |
| 02:17.20 | SarahEmm | file! |
| 02:17.23 | SarahEmm | poops |
| 02:17.25 | SarahEmm | uhh |
| 02:17.25 | SarahEmm | oops |
| 02:17.49 | file | bad kitrich bad |
| 02:18.01 | SarahEmm | mew? |
| 02:19.19 | *** join/#asterisk santiago (~santiago@63.245.86.188) |
| 02:23.59 | *** join/#asterisk flynux (5inodyv@pingou.in) |
| 02:26.28 | key2 | I have a PA168 phone and I wanted to know if someone had an idea of how to use the forward key |
| 02:29.35 | Juggie | why does app_voicemail hate me. |
| 02:29.54 | file | it hates everyone |
| 02:30.59 | Weezey | yeah, don't feel special. |
| 02:31.14 | tzafrir | Juggie, why do you feel that way? |
| 02:31.46 | Juggie | ahh trying to merge an out of date patch into it and its being a pain |
| 02:32.15 | tzafrir | Juggie, what patch? |
| 02:33.05 | Juggie | 4403 |
| 02:33.20 | Juggie | i am running a clean app_voicemail.c now from cvs |
| 02:33.24 | Juggie | and its acting weird |
| 02:33.30 | Juggie | saying mailbox is full |
| 02:34.51 | Juggie | grr |
| 02:35.29 | *** join/#asterisk Ooben (~MyUser@adsl-154-142-9.cae.bellsouth.net) |
| 02:35.46 | Ooben | Hey there, can someone try completing a call to nick@ooben.sytes.net ? |
| 02:35.56 | Ooben | SIP |
| 02:36.30 | file | uh I could |
| 02:36.46 | file | lemme look and see here |
| 02:36.58 | Hmm-home | file what time you are getting into chicago on the 2nd? |
| 02:37.04 | file | 2:45PM |
| 02:37.19 | SarahEmm | DarthClue: any word on cluecon? ;) |
| 02:37.41 | file | can you hear me? |
| 02:37.42 | JunK-Y | and u better wait my little ass dude! :) |
| 02:37.50 | Hmm-home | ahh ok, was hoping bkw_ wouldn't have to come all the way back to the airport to come get me |
| 02:37.52 | file | Ooben: ... |
| 02:37.54 | Juggie | anyone use odbc storage |
| 02:37.58 | file | Hmm-home: when do you get in? |
| 02:37.59 | Juggie | for voicemail |
| 02:38.04 | Juggie | i think its broke in cvs |
| 02:38.05 | Ooben | lol josh == file ? |
| 02:38.11 | file | Ooben: yes |
| 02:38.19 | mag_um | hi |
| 02:38.19 | Ooben | oh thanks man! |
| 02:38.26 | Hmm-home | 8:00pm |
| 02:38.27 | file | yw |
| 02:38.32 | file | Hmm-home: yow'sa |
| 02:38.37 | Juggie | file, you dont use vm odbc do ya |
| 02:38.40 | Hmm-home | best I could do |
| 02:38.45 | file | Juggie: hell no |
| 02:39.02 | Juggie | file, it did work i think someone borked it in cvs |
| 02:39.03 | file | Hmm-home: we'll get you, don't worry... |
| 02:39.15 | Hmm-home | fly out of fargo at 6:45 |
| 02:39.31 | file | I fly out at 11:30AM my time, arrive 2:45PM Chicago time |
| 02:39.49 | mag_um | i have problem with codec... anyone could guide me... |
| 02:39.58 | Hmm-home | yeah fargo to chicago is only about 700 miles iirc |
| 02:40.01 | file | mag_um: details/specifics are good |
| 02:40.39 | mag_um | Jul 14 09:19:25 WARNING[1264579392]: samples/codec_g729.c:217 g729tolin_framein: Received a G.729 frame that was 4 bytes from RTP |
| 02:40.50 | file | Hmm-home: want my cell # just in case? |
| 02:41.04 | Hmm-home | yeah I was going to gather everyone up soon here |
| 02:41.13 | Hmm-home | *everyones number |
| 02:41.16 | file | yeah |
| 02:41.36 | file | need to get a sheet... one sec |
| 02:42.52 | Juggie | anyone running latest cvs? |
| 02:43.00 | Juggie | i need someone to test voicemail |
| 02:43.56 | file | hey Katty |
| 02:44.01 | Katty | hihi |
| 02:46.19 | *** join/#asterisk mxmasster (~maxc@pool-71-106-161-147.lsanca.dsl-w.verizon.net) |
| 02:46.20 | mxmasster | hi all |
| 02:46.25 | file | hiya |
| 02:46.51 | mxmasster | i am looking for a database schema for lcr... specifically ways to store and distinguish between different countries and prefixes in a standardized way |
| 02:50.11 | file | anyone else that's going to Cluecon that wants to exchange contact info? |
| 02:50.30 | JunK-Y | ive already ur mobile, wanna mine^ |
| 02:50.48 | file | I have two numbers actually, one US one Canada |
| 02:50.54 | *** join/#asterisk bkw_ (~bkw_@bkw.developer.and.friend.of.asterisk) |
| 02:50.54 | *** mode/#asterisk [+o bkw_] by ChanServ |
| 02:50.56 | *** join/#asterisk eidolon (~eido@eidolon.monthly-bronze.supporter.pdpc) |
| 02:51.01 | JunK-Y | msg me all that. |
| 02:51.09 | SarahEmm | i dunno if i'm going, file. only if someone else finances it |
| 02:51.24 | bkw_ | OK if anyone is going to do any fucking.. it's gonna be me.. mmmkay |
| 02:51.34 | file | bkw_: what are you babbling about now?!? |
| 02:51.38 | SarahEmm | lol bkw |
| 02:51.41 | Qwell | bkw_: brt |
| 02:51.48 | Qwell | erm |
| 02:51.49 | bkw_ | haha |
| 02:51.51 | bkw_ | be right there? |
| 02:51.55 | file | bkw_: it's bad enough you're trying to hit on me, but in the channel? *GASP* |
| 02:51.57 | Qwell | typo? |
| 02:52.13 | bkw_ | file dear.. i'm not hitting on you |
| 02:52.49 | file | that's what they all say |
| 02:53.15 | bkw_ | I heard file say "fuck" the other day |
| 02:53.17 | bkw_ | I was like OMG |
| 02:53.19 | bkw_ | haha |
| 02:53.26 | file | yup |
| 02:53.28 | Qwell | cj: ? |
| 02:53.38 | file | I was on the verge of smashing my Dell today, and deleting my work |
| 02:53.38 | *** kick/#asterisk [cj!~bkw_@bkw.developer.and.friend.of.asterisk] by bkw_ (PING THIS ASSHOLE) |
| 02:53.41 | MicC_ | umm...Anyone setup FWD using IAX ? |
| 02:53.53 | *** join/#asterisk cj (~cjcollier@CJ.monthly-bronze.supporter.pdpc) |
| 02:54.02 | bkw_ | haha |
| 02:54.08 | bkw_ | cj :P |
| 02:54.11 | cj | sorry, Qwell |
| 02:54.26 | MicC_ | in the setup on the FWD website it says to put the extension (393...etc) in the "appropriate section" so I can dial 393 to access FWD |
| 02:54.30 | Qwell | cj: You should apologize to everybody individually |
| 02:54.36 | MicC_ | WTF is an "appropriate context?" |
| 02:54.53 | MicC_ | incoming works great |
| 02:54.56 | Qwell | MicC_: Whatever you want it to be |
| 02:55.06 | Katty | oooh, first snuggle all week! |
| 02:55.08 | Qwell | something your phone can dial |
| 02:55.08 | cj | sorry everybody invididually |
| 02:55.16 | MicC_ | yeah...thats the wrong thing to say to a newb...hehe. |
| 02:55.21 | MicC_ | they should say "put it here bitch" |
| 02:55.24 | file | I wonder if my US account will still ring here in Canada |
| 02:55.34 | Qwell | MicC_: put it in default then, that should work |
| 02:55.36 | Katty | hihi Nugget |
| 02:55.45 | MicC_ | hehe |
| 02:55.45 | MicC_ | thanks |
| 02:56.04 | MicC_ | thats 14 for 14 (14 questions asked and 14 questions answered in under 30 seconds) |
| 02:56.07 | MicC_ | I love this chan |
| 02:56.07 | MicC_ | :P |
| 02:56.20 | file | darn nothing |
| 02:56.44 | Katty | file: what were you doing, mister incognito? |
| 02:57.03 | file | Katty: seeing if my US cellular account would ring here in Canada |
| 02:57.09 | Katty | oh |
| 02:57.11 | Katty | k |
| 02:57.25 | Qwell | file: You get signal? |
| 02:58.18 | file | of course I get signal |
| 02:58.20 | file | roaming dear |
| 02:58.24 | Qwell | eww |
| 02:58.25 | bkw_ | OMG PEOPLE ARE FUCKING MORONS |
| 02:58.32 | Katty | gosh |
| 02:58.32 | Qwell | bkw_: What are you, new? |
| 02:58.40 | Katty | bkw_: welcome to earth (= |
| 02:58.50 | bkw_ | why are people so stupid |
| 02:59.02 | Katty | so you can seem so smart? |
| 02:59.14 | bkw_ | ok their is exactly two things a computer understands.. 1 and 0.. how the fuck do so many people get it wrong |
| 02:59.26 | file | yay binary |
| 02:59.31 | file | I had to know binary for a test at school... |
| 02:59.39 | bkw_ | fg |
| 02:59.41 | Katty | recognize it? |
| 02:59.45 | Katty | or convert it to something? |
| 02:59.53 | Nugget | they try to store the digits in mysql. :) |
| 03:00.09 | Corydon76-home | bkw_: yeah, welcome to #asterisk :-P |
| 03:00.21 | Nugget | which silently converts the 1s and 0s to foos and bars for their convenience. |
| 03:00.30 | Nuxi | actually, there is also sometimes 1 and sometimes 0. These states lead to unrecoverable errors. |
| 03:00.49 | Nugget | and in intel cpus there's only 0's and 0.99999999999999999e99s |
| 03:01.32 | Corydon76-home | FDIV... Intel's own hardware random number generator... |
| 03:01.59 | Katty | i feel really dumb right now |
| 03:02.04 | SarahEmm | lol Corydon76-home |
| 03:03.29 | Nuxi | 1000001 1110011 1110100 1100101 1110010 1101001 1110011 1101011 |
| 03:03.37 | Nuxi | == Asterisk |
| 03:03.44 | Nuxi | (ASCII) |
| 03:04.20 | Corydon76-home | 11001001 == Unconditional Return (Z80) |
| 03:04.37 | Nuxi | 0.99999999999999999e99s000000.99999999999999999e99s 0.99999999999999999e99s0.99999999999999999e99s0.99999999999999999e99s000.99999999999999999e99s0.99999999999999999e99s 0.99999999999999999e99s0.99999999999999999e99s0.99999999999999999e99s00.99999999999999999e99s00 0.99999999999999999e99s0.99999999999999999e99s000.99999999999999999e99s00.99999999999999999e99s |
| 03:04.37 | Nuxi | 0.99999999999999999e99s0.99999999999999999e99s0.99999999999999999e99s000.99999999999999999e99s0 0.99999999999999999e99s0.99999999999999999e99s00.99999999999999999e99s000.99999999999999999e99s 0.99999999999999999e99s0.99999999999999999e99s0.99999999999999999e99s000.99999999999999999e99s0.99999999999999999e99s 0.99999999999999999e99s0.99999999999999999e99s00.99999999999999999e99s00.99999999999999999e99s0.99999999999999999 |
| 03:04.42 | Nuxi | For all you intel people. |
| 03:04.43 | cfrank | Anyone know how to get zap to detect when a call is answered? |
| 03:04.48 | Corydon76-home | aka a STNG episode |
| 03:04.49 | Katty | 0 <- state of my brain. |
| 03:05.10 | *** join/#asterisk CdtDelta (~CdtDelta@dsl081-225-161.chi1.dsl.speakeasy.net) |
| 03:05.28 | Katty | someone should get this cookie crisp away from me :/ |
| 03:05.28 | Nuxi | No wonder intel is slow, all those 9s to write. er... .wati... |
| 03:05.30 | Corydon76-home | cfrank: you need to recite the special rune |
| 03:06.09 | Corydon76-home | "a la penis butter sammiches" |
| 03:06.17 | bkw_ | asterisk-biz is mom and pop voip shops.. god damn just because you can doesn't mean you should |
| 03:06.41 | Corydon76-home | bkw_: you have to start somewhere... |
| 03:07.04 | Nugget | I had this great idea yesterday! I'm going to learn how to use asterisk, and then sell connections to people. Please tell me what to type to do that, but nobody steal my idea! |
| 03:07.39 | cfrank | Corydon76-home, please translate |
| 03:07.45 | bkw_ | Corydon but these mom and pops start up.. and just disappear over night.. thats going to cause the strong hand of the FCC to smack down on us harder and faster than needed |
| 03:07.47 | Katty | Nugget: i'll get right on that |
| 03:08.22 | Nugget | also, I want to keep using my mandrake box, but my friend says gentoo makes the computer faster so is it better to install the gentoo rpm first? |
| 03:08.23 | Corydon76-home | bkw_: most businesses fail. It's a free market |
| 03:08.36 | bkw_ | not leaving people with no phone service |
| 03:08.49 | SarahEmm | nini all |
| 03:08.53 | Katty | nini sarah |
| 03:08.54 | Corydon76-home | People will learn. |
| 03:08.56 | Katty | sweet dreams (= |
| 03:09.04 | bkw_ | Corydon ya pay the little bit extra |
| 03:09.14 | bkw_ | just becuase its 0.005 per min doesn't mean its a good thing |
| 03:09.24 | Corydon76-home | Besides, I don't know anybody who honestly uses voip as their primary phone service |
| 03:09.36 | Qwell | Corydon76-home: I do |
| 03:09.36 | bkw_ | I use my cellphone |
| 03:09.37 | bkw_ | hehe |
| 03:09.40 | Nugget | I'd like to, but it's just too flaky. |
| 03:09.44 | Katty | phone? what's that? |
| 03:09.46 | bkw_ | Qwell, stupid meet world! |
| 03:09.55 | Nuxi | he's hard to get a hold of. |
| 03:10.03 | bkw_ | I have a land line |
| 03:10.08 | bkw_ | but I don't even have a phone hooked up to it |
| 03:10.34 | Corydon76-home | I have a landline as well... |
| 03:10.37 | cfrank | Take2, Does zap detect answered call. |
| 03:10.53 | Nugget | I use my landline for fax |
| 03:11.04 | bkw_ | well my cellphone is on a trip right now to get the AT&T cooties take out of it |
| 03:11.20 | kd5uzz | what codec uses the least amount of bandwidth? |
| 03:11.29 | Corydon76-home | You got naked cuties in your phone? |
| 03:11.35 | Katty | bkw_: what happened? :< |
| 03:11.36 | Nuxi | unix talk? gziped? |
| 03:11.38 | bkw_ | kd5uzz, its called research.. www.voip-info.org has a nice article about it |
| 03:11.47 | bkw_ | Katty, it was an unlocked nokia 6620 from AT&T |
| 03:11.54 | Corydon76-home | kd5uzz: lpc10 |
| 03:12.04 | bkw_ | and I wanted the at&t firmware gone.. and updated to an uncustomized version |
| 03:12.22 | Katty | oh ah |
| 03:15.58 | file[laptop] | what's everyone up to? |
| 03:16.01 | file[laptop] | besides no good. |
| 03:16.37 | *** join/#asterisk bjohnson (~bjohnson@i216-58-63-248.igs.net) |
| 03:17.36 | Nugget | slacking, drinking asahi |
| 03:17.55 | file[laptop] | ooh drinking |
| 03:19.14 | file[laptop] | I hate the nights, it always gets so quiet... |
| 03:20.00 | Nugget | move to japan and your nights will be everyone else |
| 03:20.03 | Nugget | 's mornings. |
| 03:20.23 | file[laptop] | true |
| 03:24.28 | *** join/#asterisk slup (~Slup@62.99.97.45) |
| 03:25.56 | |Vulture| | the nights are the best |
| 03:26.42 | slup | dose anyone know of any way, workaround, patch or hack to change the voicemail options? |
| 03:27.05 | |Vulture| | like what options? |
| 03:27.10 | Katty | file[laptop]: 5ft 2in |
| 03:27.10 | Qwell | use the source Luke^wslup |
| 03:27.32 | |Vulture| | a lot of the options have been moved to voicemail.conf in HEAD |
| 03:28.14 | slup | as in the keymapings |Vulture| |
| 03:28.37 | |Vulture| | oh you will have to mess with the source then |
| 03:28.50 | slup | Qwell :) |
| 03:29.51 | slup | source is in C right? |Vulture| Qwell ? |
| 03:30.34 | |Vulture| | yup in the /usr/src/asterisk/voicemail |
| 03:31.00 | slup | i code but not in C so i think that might take me right out of depth :S |
| 03:31.57 | slup | anyone know better then the sites i've been trawling round if there is a voicemail app rework in the pipeline? |
| 03:32.24 | file[laptop] | YATTA! |
| 03:33.03 | file[laptop] | slup: you could write your own if you really wanted in another language... using AGI, if you REALLY wanted |
| 03:33.17 | slup | i came accross pages talking about it and key mappings seemed to be a common theme amoungst many other more involved toipcs |
| 03:33.17 | file[laptop] | but for most people, app_voicemail works ... usually |
| 03:33.21 | Nivex | file[laptop]: yatta? Now there's a name I've not heard in a long time. |
| 03:33.29 | file[laptop] | Nivex: quite |
| 03:33.32 | Juggie | file[laptop], i am working on a bug in it right now, trying to track it down :) |
| 03:33.45 | Nivex | IAX2/guest@reliant.nivex.net/6051 |
| 03:33.48 | Juggie | with realtime enabled, the new maxmsg code is broken |
| 03:34.03 | Juggie | it will assume maxmsg = 0 unless the field maxmsg exists in your voicemail users table |
| 03:35.02 | bkw_ | as it should |
| 03:35.07 | slup | AGI sounds more out of mydepth than C |
| 03:35.19 | bkw_ | Juggie, that should be there if you want it |
| 03:35.23 | Nugget | feh, AGI is trivial. |
| 03:35.27 | bkw_ | AGI is poop |
| 03:35.33 | bkw_ | real men use res_perl |
| 03:35.44 | Nugget | app_intercal is where it's at |
| 03:35.44 | slup | bkw_ yes sounds like a desired property |
| 03:36.02 | bkw_ | perl is great |
| 03:36.03 | bkw_ | I love perl |
| 03:36.18 | file[laptop] | bkw_: I found a nifty song for Asterisk... Call Me by Blondie :P |
| 03:36.34 | bkw_ | I have that |
| 03:36.38 | bkw_ | look on my aim status |
| 03:36.40 | file[laptop] | so do I |
| 03:37.52 | slup | i'm more in the boiler room than the coal face, i'd love to be able to go deep into the source but i can't do everything |
| 03:38.09 | bkw_ | why not? |
| 03:38.15 | bkw_ | you wouldn't last two seconds at our company |
| 03:38.25 | bkw_ | you have to be able to do EVERYTHING |
| 03:38.27 | bkw_ | and anything |
| 03:38.30 | Qwell | You'd last months at ours |
| 03:38.32 | bkw_ | right file |
| 03:38.34 | slup | just have to wait for someone better than me to push the right buttons |
| 03:38.35 | file[laptop] | hell yes |
| 03:38.50 | bkw_ | file has seen the madness that is our company.. its a good thing |
| 03:38.57 | Qwell | bkw_: You guys looking for somebody that can do anything? ;] |
| 03:38.59 | bkw_ | it makes for interesting days |
| 03:39.08 | bkw_ | Qwell, sorry file took that job |
| 03:39.13 | bkw_ | DarthClue, works for us too |
| 03:39.17 | |Vulture| | anyone want to buy some FXO/FXS modules or a TDM card? |
| 03:39.30 | bkw_ | |Vulture|, who would want to use that pos card? |
| 03:39.30 | wunderkin | can someone check a couple of core dumps.. one from 6-14-04 head and 7-11-04 head.. i know june is old but this in production.. i know you will probably say update but i dont think ive really seen much that would affect me.. |
| 03:39.36 | wunderkin | er 2005 |
| 03:39.36 | |Vulture| | bkw_: shhhh |
| 03:39.46 | Katty | naptime for kattys |
| 03:39.48 | |Vulture| | bkw_: digium suckered me into buying them |
| 03:39.52 | bkw_ | wunderkin, do you have the same running binary that generated the cores? |
| 03:39.54 | |Vulture| | :( |
| 03:39.59 | wunderkin | bkw_, yeah |
| 03:40.07 | bkw_ | gdb asterisk core |
| 03:40.08 | bkw_ | bt full |
| 03:40.12 | |Vulture| | if this Sangoma card works well Im not looking back |
| 03:40.13 | bkw_ | post it to pastebin.ca |
| 03:40.14 | slup | i'm resionably happy with my firm although qwell s firm sounds good if the pays right :p |
| 03:40.31 | Qwell | slup: are you an idiot? If so, you'll make $50k+ |
| 03:40.31 | file[laptop] | I get to work with cool people all day! |
| 03:40.32 | bkw_ | wunderkin, you should come to cluecon |
| 03:40.39 | Qwell | otherwise, no, the pay is crap |
| 03:40.40 | bkw_ | i'll be showing you how to use gdb and valgrind |
| 03:40.45 | wunderkin | already there dude http://pastebin.ca/17662 and http://pastebin.ca/17663 :D |
| 03:41.00 | file[laptop] | oh that bug... |
| 03:41.02 | wunderkin | i can do a bt full and put it into a file thats all :) |
| 03:41.05 | bkw_ | wunderkin, that really does me no good |
| 03:41.11 | bkw_ | i'll need to get in and poke around at it |
| 03:41.18 | bkw_ | wunderkin, you up for a gdb lesson? |
| 03:41.21 | file[laptop] | I think I had that happen on my box once... |
| 03:41.29 | bkw_ | sometimes the bt can lie |
| 03:41.40 | bkw_ | it will say its fucking up one place.. but its really not |
| 03:41.45 | wunderkin | ok... |
| 03:41.50 | slup | qwell no i'm only half an idiot so do i make double or half? |
| 03:41.51 | bkw_ | those are the ones that make you go WTF |
| 03:41.56 | Qwell | slup: half |
| 03:42.07 | bkw_ | now valgrind is the shiznit for finding shit |
| 03:42.09 | file[laptop] | I'm hallucinating again |
| 03:42.36 | bkw_ | file I had a bug crawl accross my face lastnight while I was sleeping |
| 03:42.39 | bkw_ | freaked me the fuck out |
| 03:42.40 | bkw_ | haha |
| 03:42.40 | Nugget | ew |
| 03:42.43 | slup | qwell i can always burn half my cv |
| 03:42.45 | litage | file[laptop]: here in .au we actually have spiders that big |
| 03:42.53 | bkw_ | wunderkin, can you get me access to your box? |
| 03:42.54 | file[laptop] | litage: don't tell me that |
| 03:42.56 | Qwell | slup: No, you have to actually be an idiot |
| 03:42.57 | bkw_ | so I can poke at the core |
| 03:43.02 | bkw_ | ok dirty thoughts |
| 03:43.08 | bkw_ | NEXT!!! |
| 03:43.10 | wunderkin | hehe |
| 03:43.11 | file[laptop] | naughty naughty bkw_ |
| 03:43.16 | bkw_ | yes sorry |
| 03:43.16 | file[laptop] | getting intimate with that core dump |
| 03:43.18 | Nivex | Nugget: glad you said that and not me :) |
| 03:43.33 | slup | qwell well i live in europe so the comute would kill anyway |
| 03:43.46 | file[laptop] | poison the entire house, and Greg at the same time? |
| 03:43.49 | bkw_ | orkin is about to descend onto this house like a swat team |
| 03:43.50 | Corydon76-home | Hey! Let's rewrite glibc and put all the functions in Asterisk. That way, we reduce our dependencies! |
| 03:43.56 | litage | file[laptop]: honestly, we do. you occasionally see these huge huntsman spiders that are big enough to shoot with a gun |
| 03:44.01 | bkw_ | Corydon GREAT IDEA |
| 03:44.07 | bkw_ | lets rename them all with ast_ in the names |
| 03:44.10 | wunderkin | bkw_, yeah.. or would it suffice to tar the source files? |
| 03:44.14 | bkw_ | that should confuse the hell out of people |
| 03:44.20 | bkw_ | wunderkin, does me no good |
| 03:44.26 | Corydon76-home | And while we're at it, let's rewrite the kernel so that Asterisk doesn't depend upon that, either! We'll make it it's own OS |
| 03:44.33 | file[laptop] | Corydon76-home: great idea! |
| 03:44.39 | bkw_ | asterisk will boot fully native as the OS on the box |
| 03:44.42 | bkw_ | now thats a novel idea |
| 03:44.45 | bkw_ | Lets do that |
| 03:44.48 | file[laptop] | it'll be ZeroLatency(tm) technology |
| 03:44.49 | Qwell | I'm in |
| 03:45.03 | file[laptop] | cause ya know it just HAS to have a fancy name |
| 03:45.04 | bkw_ | and when it segfaults .. man it will fucking segfault |
| 03:45.07 | Corydon76-home | And HEY! Why don't we make an Asterisk processor, too! That way, we won't have to depend upon arbitrary processor issues! |
| 03:45.17 | bkw_ | Corydon ok lets do that too |
| 03:45.17 | Nivex | Corydon76-home: you strike me as an emacs guy. |
| 03:45.18 | Nivex | :-P |
| 03:45.19 | file[laptop] | Corydon76-home: omg that's an awesome idea |
| 03:45.26 | bkw_ | i'm a emacs guy |
| 03:45.26 | slup | bkw_ thats a friggin mental idea so it's probably the best one |
| 03:45.34 | Qwell | wait for it...wait for it... |
| 03:45.35 | Corydon76-home | Nivex: sarcasm is lost on you |
| 03:45.35 | bkw_ | I knew file would fall in love with emacs |
| 03:45.40 | Qwell | we could call it x-asterisk |
| 03:45.44 | wunderkin | bkw_, ok.. |
| 03:45.45 | bkw_ | asteriskX |
| 03:45.47 | Qwell | instead of x86... |
| 03:45.48 | Qwell | nevermind |
| 03:45.51 | Nivex | Corydon76-home: and on you as well |
| 03:45.56 | Qwell | it only works if you say them both out loud |
| 03:46.11 | bkw_ | file did you get the .emacs file from coast1? |
| 03:46.12 | Nivex | Qwell: I got it. cute. |
| 03:46.22 | file[laptop] | bkw_: not yet |
| 03:46.28 | file[laptop] | bkw_: I've been working in PHP |
| 03:46.33 | Nivex | sleep time. gnite. |
| 03:46.35 | bkw_ | did you get php syntax stuff in there? |
| 03:46.39 | Corydon76-home | Emacs is a nice operating system, but it lacks a decent editor |
| 03:46.42 | bkw_ | they have a module for that |
| 03:46.45 | bkw_ | WHAT? |
| 03:46.48 | bkw_ | emacs is great |
| 03:46.49 | file[laptop] | pfft nah |
| 03:46.56 | bkw_ | usage of emacs with gdb or valgrind is NICE |
| 03:47.08 | bkw_ | it will open and warp you to the line in the code where the problem is |
| 03:47.22 | bkw_ | hand applying diff files is the same way |
| 03:47.28 | Qwell | lame |
| 03:47.33 | file[laptop] | I need to still do my presentation |
| 03:47.33 | file[laptop] | bleh |
| 03:47.36 | bkw_ | you can open a diff .. go to the line.. press enter.. it will warp you to the line in the file where it shoudl go |
| 03:47.55 | Qwell | hmm |
| 03:47.55 | Corydon76-home | I would make emacs your shell, but I don't have memory to burn |
| 03:47.56 | bkw_ | so if you had to hand apply a diff its great |
| 03:48.05 | bkw_ | M-x shell |
| 03:48.07 | bkw_ | it has it alrready |
| 03:48.11 | bkw_ | hehe |
| 03:48.14 | file[laptop] | bkw_: did we get the res the projector is going to work at yet? |
| 03:48.26 | bkw_ | file no but i'll saddle up and ride someones ass about it tommorow |
| 03:48.34 | file[laptop] | bkw_: ride it goooood |
| 03:48.45 | bkw_ | don't think anthm would like that too much |
| 03:48.46 | bkw_ | haha |
| 03:48.52 | file[laptop] | meh |
| 03:48.54 | Nugget | bkw's gonna ride you hard and put you up wet. |
| 03:49.00 | Corydon76-home | Why project graphics when you can project emacs and do your presentation in there? |
| 03:49.02 | bkw_ | NOT RIGHT |
| 03:49.23 | bkw_ | i'll use emacs for mine |
| 03:49.28 | bkw_ | because i'm doing a demo/howto |
| 03:49.34 | bkw_ | power point has no place in my talk |
| 03:49.47 | file[laptop] | I haven't quite figured out how I wanna do mine |
| 03:49.53 | Corydon76-home | That's because you're a sick MF |
| 03:50.02 | bkw_ | file setup ser |
| 03:50.04 | bkw_ | on stage |
| 03:50.06 | bkw_ | :P |
| 03:50.19 | bkw_ | and make it talk to asterisk |
| 03:50.22 | bkw_ | :P |
| 03:50.22 | Qwell | I should speak at astricon |
| 03:50.27 | file[laptop] | bkw_: I wanna give a background on what it is/does/why it rocks |
| 03:50.31 | mishehu | don't speak with (a) lisp |
| 03:50.48 | file[laptop] | I'll think of something |
| 03:50.50 | file[laptop] | work on it this weekend. |
| 03:51.49 | *** join/#asterisk jdg (~jdg@CA03F90F.adsl.mana.pf) |
| 03:52.00 | slup | well i'd better be off |
| 03:52.13 | bkw_ | i'm about to spiffy mine up a bit |
| 03:53.01 | slup | one last thing how much do you recon it might cost to get someone to dabble in the source and bring the key mappings out ot a conf file? |
| 03:53.21 | Qwell | slup: for voicemail? like, "press 1 to do this, press 2 to do that"? |
| 03:53.30 | slup | yea |
| 03:53.36 | Qwell | dunno, whats it worth to you? |
| 03:53.49 | file[laptop] | don't forget recordings. |
| 03:54.10 | *** join/#asterisk bankrupt (~bank@pcp08695394pcs.500ash01.tn.comcast.net) |
| 03:54.16 | slup | recordings not a problem |
| 03:55.01 | slup | good Q Qwell i've not looked too deep into workarounds yet |
| 03:55.29 | slup | could get away with chopping some of the recordings around |
| 03:55.35 | Qwell | likely |
| 03:55.43 | slup | it's mainly the order of things thats bugging me |
| 03:55.44 | *** join/#asterisk DA-MAN (~DA-MAN@66-215-92-29.pas-eres.charterpipeline.net) |
| 03:56.59 | cj | DA-MAN: watch out, man. You're very nearly taking my nick :) |
| 03:57.00 | slup | but being able to redo the actual mappings to fit an existing or prefered layout is somthing i'm supprised hasn't been done already |
| 03:57.11 | cj | DA-MAN: my nick used to be da_man for a few years |
| 03:57.24 | *** join/#asterisk santiago (~santiago@63.245.86.188) |
| 03:58.22 | slup | why hasn't some just made it like an IVR with actions |
| 03:58.39 | Qwell | explain |
| 03:58.43 | Qwell | oh, vm |
| 03:58.52 | slup | ye |
| 03:59.07 | Qwell | I guess you *could* break out app_voicemail and use parts of it in the dialplan |
| 03:59.10 | Qwell | but...yeah |
| 03:59.19 | slup | so you map your options and trigger actions |
| 03:59.30 | slup | could you |
| 03:59.45 | slup | without gettiug into the source? |
| 03:59.50 | Qwell | no, heh |
| 03:59.57 | Qwell | it would be quite a change I'm sure |
| 03:59.59 | slup | :p |
| 04:00.00 | *** part/#asterisk jdg (~jdg@CA03F90F.adsl.mana.pf) |
| 04:00.32 | slup | mmm i hate things like that |
| 04:00.33 | Juggie | anyone using realtime + app_voicemail? |
| 04:00.55 | Qwell | Juggie: to test drmacs patch? |
| 04:01.00 | Juggie | no |
| 04:01.01 | *** join/#asterisk MustDie (~voip@ool-18b91f29.dyn.optonline.net) |
| 04:01.08 | Juggie | i'm hunting a bug with the new maxmsg code |
| 04:01.11 | Juggie | related to realtime |
| 04:01.12 | MicC_ | hey |
| 04:01.18 | slup | i get like a dog with a bone but i think this bone is not going to budge |
| 04:01.20 | Juggie | if the field is missing from your database, it sets the maxmsg to 0 |
| 04:01.23 | MicC_ | I am having a bastard of a time adding FWD outbound |
| 04:01.26 | Juggie | and breaks your message taking |
| 04:01.30 | MicC_ | their instructions just don't work |
| 04:01.57 | file[laptop] | MicC_: yes, yes they do |
| 04:01.57 | MicC_ | can anyone look at my outbound code and make a suggestion? |
| 04:02.13 | file[laptop] | MicC_: I activated IAX2 on my account, and then pasted the example from their FAQ and it works great |
| 04:02.17 | file[laptop] | same goes for inbound |
| 04:02.52 | MicC_ | file: where did you put the outbound (dial 393 to get out) stuff at? |
| 04:03.02 | MicC_ | inbound works beautiful |
| 04:03.13 | *** join/#asterisk twisted (~twisted@twisted-professional-pdpc.developer.and.friend.of.asterisk) |
| 04:03.13 | *** mode/#asterisk [+o twisted] by ChanServ |
| 04:03.18 | file[laptop] | MicC_: in my voip context... that I use for VoIP Peering, like to FWD and sipphone... |
| 04:03.27 | twisted | file!!! |
| 04:03.35 | file[laptop] | MicC_: has to be in a context that's reachable from the phone you're calling from though |
| 04:03.35 | twisted | (just a forewarning) |
| 04:03.38 | file[laptop] | twisted: heyyyyy |
| 04:03.40 | MicC_ | I have the AMP management inteface |
| 04:03.49 | MicC_ | its making a mess of my extensions.conf |
| 04:03.49 | file[laptop] | MicC_: uh yeah, I don't help with people who use AMP. |
| 04:03.56 | MicC_ | lol |
| 04:03.59 | file[laptop] | it's too much of a hassle |
| 04:04.11 | twisted | amp == shite |
| 04:04.13 | MicC_ | is there another less annoying interface? |
| 04:04.15 | file[laptop] | plus I think there's a guide for setting FWD up with AMP |
| 04:04.16 | twisted | well |
| 04:04.22 | twisted | the interface is nice, but the way it does shit is shite |
| 04:04.28 | MicC_ | ah |
| 04:04.34 | MicC_ | is there an alternative? |
| 04:04.39 | MicC_ | <= noob. |
| 04:04.39 | twisted | DIY ;) |
| 04:04.56 | twisted | actually, the best interface i've found by far is vi/vim |
| 04:05.03 | MicC_ | ok....something that dosen't involve a couple of weeks of coding. |
| 04:05.16 | MicC_ | I had it working without AMP |
| 04:05.30 | MicC_ | but I have to make it easy for idiots |
| 04:05.32 | twisted | switchvox has a nice interface |
| 04:05.34 | twisted | but it's not free |
| 04:05.38 | file[laptop] | yay switchvox |
| 04:05.44 | file[laptop] | twisted: so why are you slightly tipsy? |
| 04:05.51 | twisted | file: betcha never thought i'd bring them up, eh? |
| 04:06.02 | twisted | file, i was hanging out with some co-workers at margarita night |
| 04:06.04 | file[laptop] | twisted: I knew you'd have a certain someone on your mind from there :P |
| 04:06.12 | twisted | file, oh yea? |
| 04:06.16 | twisted | and who might that be? |
| 04:06.25 | file[laptop] | someone who happens to be married |
| 04:06.25 | MicC_ | back to what said...it has to be in a context reachable by the phone I am dialing from |
| 04:06.33 | MicC_ | suggestion..? |
| 04:06.36 | twisted | ehh? |
| 04:06.58 | twisted | OH - Tristan |
| 04:07.00 | MicC_ | hangong...I am going to google for that guide on installing FWD in AMP |
| 04:07.04 | twisted | haha, i didn't know she was married |
| 04:07.09 | file[laptop] | twisted: haha yup |
| 04:07.13 | twisted | lol |
| 04:07.14 | twisted | anywho |
| 04:07.17 | twisted | rebooting into 10.4.2 |
| 04:07.17 | twisted | brb |
| 04:08.16 | harryvv | anyone here use monowal? |
| 04:09.08 | brenda | I had mono once |
| 04:10.17 | harryvv | so did my wife and she never kissed anyone as a teen :) |
| 04:10.48 | *** join/#asterisk twisted (~twisted@twisted-professional-pdpc.developer.and.friend.of.asterisk) |
| 04:10.48 | *** mode/#asterisk [+o twisted] by ChanServ |
| 04:10.50 | twisted | j #redbull |
| 04:11.16 | twisted | file: what's different in 10.4.2? |
| 04:11.21 | Micc | Micc_, every time you come in here and talk my dotIRC starts flashing. |
| 04:12.35 | file[laptop] | twisted: stuff is different |
| 04:12.47 | file[laptop] | twisted: haven't really figured out what, but it feels faster |
| 04:13.16 | twisted | it does feel faster |
| 04:13.21 | twisted | it booted up in like half the time |
| 04:13.27 | file[laptop] | yup |
| 04:13.27 | twisted | and applications are like *POW* |
| 04:13.41 | file[laptop] | makes me happppppy |
| 04:14.45 | *** join/#asterisk loud (~roots@cypher.punk.net) |
| 04:15.01 | SplasPood | twisted: you think so? I don't feel it... |
| 04:15.14 | twisted | SplasPood, yea |
| 04:15.15 | twisted | i feel it |
| 04:15.20 | twisted | but then again i'm running a dual 1.25 |
| 04:15.39 | SplasPood | ahh, i'm on an older albook |
| 04:15.58 | SplasPood | gig of ram and what not, but slower.. and not dual |
| 04:15.59 | SplasPood | :P |
| 04:16.03 | twisted | heh |
| 04:16.04 | twisted | eah |
| 04:16.06 | SplasPood | its the 17" tho |
| 04:16.12 | twisted | dual 1.25 w/ a gig o ram |
| 04:16.21 | twisted | and dual 17" flats |
| 04:16.41 | SplasPood | I still think mine is cooler, so nyah :P |
| 04:16.43 | file[laptop] | the Mini feels faster too |
| 04:17.23 | twisted | lol |
| 04:17.28 | twisted | my power book is still "coming" |
| 04:17.33 | file[laptop] | haha |
| 04:17.46 | file[laptop] | poor twisted |
| 04:17.51 | twisted | i almost wound up with one last week |
| 04:17.53 | twisted | but it was a 500mhz |
| 04:17.55 | twisted | so i declined |
| 04:18.54 | twisted | lol |
| 04:18.55 | Qwell | Nugget: You suck |
| 04:19.07 | twisted | Nugget, how big is your cinema display? |
| 04:19.17 | Nugget | big enough that I can't get my arms around it. :) |
| 04:19.25 | twisted | what size, ninny |
| 04:19.28 | Nugget | 30" |
| 04:19.41 | twisted | i'll trade you my two 17" flat screens for your 30" |
| 04:19.45 | Nugget | bollocks |
| 04:19.46 | twisted | that makes 34" |
| 04:19.50 | twisted | it's a great deal! |
| 04:20.06 | Qwell | real men have dual 30" |
| 04:20.10 | twisted | no |
| 04:20.16 | twisted | real men have a 6" lcd |
| 04:20.20 | twisted | so as not to overcompensate |
| 04:22.14 | Nugget | 2x17" displays at 1280x1024 is only 2.6 million pixels. wimpy. :) |
| 04:22.29 | MicC_ | file: got it working |
| 04:22.34 | MicC_ | stupid AMP |
| 04:22.44 | file[laptop] | yes, stupid AMP |
| 04:23.51 | MicC_ | hrm...is it a 1 time cost for switchvox? |
| 04:26.27 | *** join/#asterisk Newbie___ (me@211.24.146.11) |
| 04:26.54 | Newbie___ | hi could anyone recommend a SIP-H323 translator ? |
| 04:27.31 | fluidicsl | any one know of a good doc for setting up asterisk voice mail |
| 04:27.46 | fluidicsl | any one know of a good doc for setting up asterisk voice mail |
| 04:27.52 | loud | voicemail.conf |
| 04:27.52 | MicC_ | fluidicsl: don't use AMP |
| 04:27.53 | MicC_ | hehe |
| 04:27.57 | fluidicsl | yeah I am not |
| 04:28.28 | fluidicsl | no but I am looking for a good howto exsplaining it |
| 04:28.57 | *** join/#asterisk alphaque (~alphaque@218.111.61.41) |
| 04:29.23 | loud | here |
| 04:29.26 | loud | http://voip-info.org/wiki-Asterisk+voicemail |
| 04:29.57 | fluidicsl | I must be the only person who hats that site with a passion |
| 04:30.16 | wunderkin | must be |
| 04:30.32 | fluidicsl | I just think most of the exsplinations are really poor |
| 04:30.32 | mog_home | there can be only one |
| 04:30.48 | file[laptop] | it's a wiki - improve it. |
| 04:31.01 | loud | yeah, i understand, you are like those people who say "cisco.com" site does not explain anything. |
| 04:31.13 | loud | hire someone who can help you then. |
| 04:31.18 | loud | easy, no reading . |
| 04:31.59 | wunderkin | bkw are you still around? |
| 04:32.08 | wunderkin | hehe |
| 04:32.32 | file[laptop] | what do you need bkw for? |
| 04:32.52 | JunK-Y | for sex. |
| 04:32.54 | JunK-Y | NEXT! |
| 04:32.55 | JunK-Y | hjhehe |
| 04:32.59 | wunderkin | for <3 |
| 04:33.04 | file[laptop] | I thought so. |
| 04:36.07 | *** join/#asterisk MrBelvedr (~tt@ip68-227-218-250.dc.dc.cox.net) |
| 04:40.41 | *** join/#asterisk scardinal (~supreme@port816.ds1-suoe.adsl.cybercity.dk) |
| 04:45.11 | bkw_ | http://zeeb.at/oops/DontLook.jpg |
| 04:45.29 | Juggie | bkw, i found a bug in realtime i think, do you have realtime voicemail setup? |
| 04:45.33 | Juggie | trying to confirm it |
| 04:45.33 | *** join/#asterisk helpmeguys (~helpmeguy@222.253.74.83) |
| 04:45.45 | bkw_ | what is the bug? |
| 04:46.03 | Juggie | with realtime and the new maxmsg patch, funky things happen |
| 04:46.10 | bkw_ | no clue |
| 04:46.11 | bkw_ | dont' have ti setup |
| 04:46.12 | bkw_ | http://zeeb.at/oops/AirtranAir.jpg |
| 04:46.25 | Juggie | if maxmsg field is missing from your voicemail users table, it breaks voicemail |
| 04:46.28 | Juggie | maxmsg is allways set to 0 |
| 04:46.32 | *** join/#asterisk Dorado (~adaniels@203-80-40-200.cpe.goonellabah.norlink.com.au) |
| 04:46.37 | bkw_ | well patch it |
| 04:46.48 | Juggie | i have been working on it for like 2hrs |
| 04:46.51 | Juggie | i cant find whats going on |
| 04:46.52 | bkw_ | 2 hours? |
| 04:46.57 | twisted | wheee |
| 04:46.58 | bkw_ | for a maybe a 2 linep atch? |
| 04:47.00 | twisted | bkw!! |
| 04:47.04 | bkw_ | twisted yes? |
| 04:47.06 | twisted | hi |
| 04:47.17 | Juggie | we cant find whats not working, and i dont exactally know * internals. |
| 04:47.20 | twisted | slightly, too |
| 04:47.37 | twisted | bkw never talks to me anymore |
| 04:47.38 | *** join/#asterisk helpmeguys (~helpmeguy@222.253.74.83) |
| 04:47.53 | bkw_ | ya I do |
| 04:47.56 | file[laptop] | twisted: one night stand? |
| 04:47.57 | bkw_ | you're busy and so am I |
| 04:47.57 | bkw_ | hehe |
| 04:48.01 | twisted | haha |
| 04:48.06 | bkw_ | Juggie, this is simple to see why its not set |
| 04:48.07 | file[laptop] | yeah we're all busy |
| 04:48.09 | twisted | sometimes |
| 04:48.13 | twisted | this is true |
| 04:48.23 | twisted | wheee alcohole |
| 04:48.25 | twisted | -e |
| 04:48.46 | bkw_ | Juggie, actually |
| 04:48.51 | twisted | meh |
| 04:48.58 | twisted | i'm gonna chill in front of the boob tube |
| 04:48.59 | bkw_ | twisted hrm |
| 04:49.07 | twisted | heh |
| 04:49.13 | Juggie | bkw_, me and junky have been playing with it for a couple of hours... append_mailbox looks like it should set vmu->maxmsg = maxmsg when its not set to a proper value |
| 04:49.17 | Juggie | but it doesnt get run |
| 04:49.25 | twisted | bkw_, ? |
| 04:49.40 | bkw_ | line 5527 does the logic backwards from the rest of the stuff |
| 04:49.48 | bkw_ | its shit like this that makes asterisk suck some days |
| 04:50.02 | file[laptop] | some days? |
| 04:50.12 | twisted | haha |
| 04:50.14 | twisted | some days |
| 04:50.16 | twisted | tha's a good funnie |
| 04:50.17 | bkw_ | haha |
| 04:50.30 | bkw_ | ok in find_user_realtime |
| 04:50.33 | bkw_ | you'll need to do this |
| 04:50.46 | twisted | er |
| 04:50.47 | twisted | stfu |
| 04:51.15 | file[laptop] | if there is one present ^^^ |
| 04:51.28 | Juggie | i started off by trying to port an old patch to work on the new changes in head and in the process of that i found this bug first |
| 04:51.58 | Juggie | i ported the patch ok, but vm crashes when it exists, sometimes, not sure whats happening there yet |
| 04:52.28 | bkw_ | this is a one liner really |
| 04:52.29 | bkw_ | ast_copy_string(retval->maxmsg, MAXMSG, sizeof(retval->maxmsg)); |
| 04:52.45 | bkw_ | in find_user_realtime |
| 04:52.48 | Juggie | why MAXMSG |
| 04:52.52 | Juggie | it should be maxmsg |
| 04:52.57 | bkw_ | um you'll need to copy it in |
| 04:53.01 | bkw_ | start with a default |
| 04:53.07 | bkw_ | then let your column override it if itsnot null |
| 04:53.14 | bkw_ | it doesn't set a default it looks like |
| 04:53.22 | Juggie | right, but the voicemail.conf contains the default now |
| 04:53.32 | bkw_ | actually go read the code |
| 04:53.37 | bkw_ | MAXMSG defaults to 100 |
| 04:53.40 | bkw_ | as in ITS NOT SET |
| 04:53.51 | bkw_ | gotta start with something if its not set |
| 04:54.03 | bkw_ | you can also go find it and copy it in but not wise for realtime |
| 04:54.13 | *** join/#asterisk af_ (~af@ip-131-22.sn2.eutelia.it) |
| 04:54.19 | Juggie | ok, but i was thinking that the users should get set to the default value |
| 04:54.27 | bkw_ | you're not thinking |
| 04:54.29 | Juggie | eg, if i set 50 as default in voicemail.conf |
| 04:54.29 | bkw_ | first off |
| 04:54.31 | bkw_ | you need to set something |
| 04:54.43 | bkw_ | hold on |
| 04:54.59 | Juggie | right, maxmsg is set to whatever you want in voicemail.conf |
| 04:55.05 | Juggie | and if its not there, its set to MAXMSG |
| 04:55.39 | Juggie | so i would want to use maxmsg then, such that if someone sets maxmsg=50 in voicemail.conf then everyuser defaults to 50, correct? |
| 04:55.55 | Juggie | unless of course they have an overriding value |
| 04:56.19 | Qwell | maxmsg is a per user setting? |
| 04:56.28 | Juggie | its both |
| 04:56.28 | *** join/#asterisk Kumbang (~unknown@167.205.24.5) |
| 04:56.33 | Qwell | useful |
| 04:56.36 | Juggie | global & peruser |
| 04:56.47 | JunK-Y | in general its for all users. |
| 04:56.47 | bkw_ | Juggie, you think way too small sometimes |
| 04:56.50 | Juggie | this is new in head from a few weeks ago |
| 04:56.57 | Juggie | bkw, how so. |
| 04:57.18 | JunK-Y | :P |
| 04:57.24 | Juggie | explain to me the fault in my logic there, i'm not afraid to be wrong hah |
| 04:57.28 | bkw_ | 1 this is a simple thing to fix |
| 04:57.34 | bkw_ | and I don't feel like trying to lab it up to show you |
| 04:57.50 | Juggie | i was looking in the wrong place... i didnt know realtime had seperate entry points |
| 04:57.57 | bkw_ | ;) |
| 04:57.58 | bkw_ | its ok |
| 04:58.00 | bkw_ | you know now |
| 04:58.08 | Juggie | hey, i'm a newb to the * code |
| 04:58.08 | bkw_ | you'll need to dupe the code or write a function to do it |
| 04:58.17 | Juggie | everyones gotta learn somewhere eh :) |
| 04:58.24 | bkw_ | we'll grep is your friend ;) |
| 04:58.26 | bkw_ | hehe |
| 04:58.40 | bkw_ | I don't know much of the code base but I can find where things happen pretty quickly |
| 04:58.51 | Juggie | since maxmsg is static, i should be able to just reference that |
| 04:58.56 | Juggie | i'll try it anyways see what happens :) |
| 04:59.01 | bkw_ | no don't modify that |
| 04:59.09 | bkw_ | just copy it in.. if its not in the user entry |
| 04:59.21 | bkw_ | thats the problem it should have a default then let the realtime override it |
| 04:59.28 | Juggie | right |
| 04:59.30 | Juggie | i am aware |
| 04:59.34 | bkw_ | thats one line |
| 04:59.44 | Juggie | but what i am saying is, realtime only handles per user settings, not global |
| 05:00.09 | Juggie | so I should inherit the global value read in from voicemail.conf no? |
| 05:00.11 | bkw_ | it would if you copy in the global setting if its tehre and the MAXMSG if its == 0 |
| 05:00.25 | Juggie | yah |
| 05:00.27 | Juggie | exactally |
| 05:00.37 | bkw_ | ok still one line of code |
| 05:01.10 | wunderkin | bkw_, if you need shell access ive setup an account for you.. if you want me to msg you the details |
| 05:01.13 | Juggie | wanna see if you can figure out why my patch for odbc storage crashes on exit? :) |
| 05:01.26 | bkw_ | <PROTECTED> |
| 05:01.43 | Juggie | i just modded the previous patch to go cleanly on the new changes to app_voicemail |
| 05:02.07 | bkw_ | that will copy in the global if its there.. and the default else.. that should work |
| 05:02.33 | bkw_ | but that right after the memset in find_user_realtime |
| 05:04.59 | bkw_ | actually you need to snprintf that |
| 05:05.46 | Juggie | yah |
| 05:05.49 | Juggie | it wast workin |
| 05:06.02 | *** join/#asterisk |Vulture| (~V@c-66-177-92-4.hsd1.fl.comcast.net) |
| 05:08.01 | Juggie | i thought * wanted to eliminate all sprintf's |
| 05:08.14 | Qwell | snprintf, not sprintf |
| 05:08.32 | Qwell | sprintf is bad |
| 05:09.27 | bkw_ | in any case it might be three lines of code in that function |
| 05:10.10 | bkw_ | if you really wanna have a heart attack run asterisk under valgrind |
| 05:10.18 | bkw_ | you'll see just how sloppy the code really is |
| 05:10.37 | Qwell | bkw_: You should give a talk on debuggers at astricon |
| 05:10.44 | Juggie | yah |
| 05:10.52 | bkw_ | its all just really minor things |
| 05:10.55 | bkw_ | but still its sloppy |
| 05:10.58 | Juggie | debugging on linux is totally not what i am used to |
| 05:11.06 | Juggie | i am useless with out my win32 debugger :) |
| 05:11.17 | bkw_ | valgrind is the shiznit for finding memory issues |
| 05:12.10 | bkw_ | bed time |
| 05:12.12 | Juggie | why is snprintf required here anyways, whats wrong with ast_copy_string |
| 05:12.12 | bkw_ | later |
| 05:12.37 | bkw_ | you gotta get the int into a string.. atoi(maxmsg) might work |
| 05:12.50 | *** join/#asterisk florz (nobody@2001:1a50:503c:0:0:0:0:1) |
| 05:12.53 | bkw_ | actually you don't |
| 05:12.56 | bkw_ | i'm very tired right now |
| 05:12.59 | bkw_ | so i'm nto all here |
| 05:13.12 | bkw_ | just might not have to snprintf it.. its an int on the struct |
| 05:13.21 | bkw_ | so you should be able to just assign it |
| 05:13.28 | bkw_ | ok bed calls my name |
| 05:13.29 | bkw_ | bbl |
| 05:17.07 | Juggie | yah i should sleep too |
| 05:17.42 | JunK-Y | me too, wake up at 6 :( |
| 05:20.36 | Dorado | does anyone have any experience with octtel FXO boxes? |
| 05:21.12 | Dorado | I'm having trouble getting it to send a call to my asterisk gateway without an extension. |
| 05:25.58 | *** join/#asterisk menger (~menger@static-88.243.240.220.dsl.comindico.com.au) |
| 05:27.30 | file[laptop] | hrm do I sleep... or not |
| 05:27.55 | menger | sleep is over rated |
| 05:28.10 | file[laptop] | oh no, it's Matt Enger |
| 05:28.52 | menger | :P |
| 05:29.19 | file[laptop] | oh no you got married while I wasn't looking |
| 05:29.38 | menger | lol |
| 05:30.05 | file[laptop] | I bet your geekness has gone down hill |
| 05:33.08 | Maveric | w00t for mythtv |
| 05:33.14 | Maveric | and asterisk |
| 05:33.23 | menger | file: oh for sure |
| 05:34.26 | file[laptop] | menger: very sad |
| 05:38.27 | menger | :P |
| 05:38.40 | menger | anyone here use a cisco 7960 + 7914? |
| 05:39.11 | *** join/#asterisk syle (~blah@wnpgmb06dc1-167-98.dynamic.mts.net) |
| 05:41.06 | *** join/#asterisk juice (~juice@mo-69-69-247-217.dyn.sprint-hsd.net) |
| 05:42.52 | *** join/#asterisk Strom_C (~strom@66.159.243.60) |
| 05:42.56 | Strom_C | hello telephone audience |
| 05:43.25 | cp5 | Junk-y, what do you mean a disclaimer? what is it that i need to include in the patch? |
| 05:43.49 | JunK-Y | cp5: read the bug guidelines, u'll see. |
| 05:43.54 | cp5 | okay, thanks |
| 05:44.16 | JunK-Y | and btw, u should read it before posting a bug :) |
| 05:44.24 | cp5 | ah my bad |
| 05:44.28 | cp5 | i wasn't aware of it |
| 05:44.45 | JunK-Y | just read it carefully and give us state about all that. |
| 05:44.50 | cp5 | will do |
| 05:46.09 | syle | what central authority decides where to route DID's? |
| 05:49.19 | Qwell | syle: in North America, NANPA, right? |
| 05:49.56 | syle | right |
| 05:50.59 | syle | hey i got a problem not sure whats going on , i have one asterisk server on outside static ip, and one asterisk box here at home behind NAT, i have a register statement on my home box, but it never seems to register, so i can;t call back home |
| 05:51.21 | Qwell | NAT is evil |
| 05:51.37 | syle | isn;t idea of register statement that asterisk keeps a log of the ip address of the iax/sip connection so it knows where to go |
| 05:52.32 | syle | it only works when i hardcode host= with my currenty dynamic ip address |
| 05:52.45 | syle | and doing some port forwarding hehe |
| 05:53.05 | *** join/#asterisk twisted (~twisted@twisted-professional-pdpc.developer.and.friend.of.asterisk) |
| 05:53.05 | *** mode/#asterisk [+o twisted] by ChanServ |
| 06:00.56 | syle | ahh fuck i see what it was |
| 06:01.09 | syle | didn;t have register statement in general section |
| 06:01.10 | syle | blah |
| 06:02.13 | *** join/#asterisk djin_ib (~djin_ib@gridfox.xs4all.nl) |
| 06:09.44 | *** join/#asterisk helpmeguys (~helpmeguy@222.253.74.83) |
| 06:21.00 | *** join/#asterisk newl (~newlook@203-59-217-50.dyn.iinet.net.au) |
| 06:22.21 | syle | lovely |
| 06:23.24 | syle | all you providers: how much you paying a minute typically on inbound DID numbers? |
| 06:23.33 | infinity1 | syle: you're still talking to yourself? :) |
| 06:23.42 | syle | talking to whoever is listening :) |
| 06:23.59 | Qwell | syle: 2c/min for tollfree incoming |
| 06:24.13 | syle | not toll free |
| 06:24.34 | infinity1 | syle: i've been paying 2cents |
| 06:24.48 | infinity1 | syle: but i haven't shopped aruond much. i just use it for dialing out. |
| 06:25.03 | syle | ahhh |
| 06:25.20 | syle | http://www.iax.cc/index.php?refer=iaxgoogle |
| 06:25.38 | syle | this site does 1.3 cents a minute inbound DID |
| 06:25.48 | infinity1 | i do have inbound, but don't use it :) |
| 06:25.52 | syle | and your outbound calls are about 1.43 cents a minute |
| 06:26.01 | *** join/#asterisk shido6 (~greg@d221-68-209.commercial.cgocable.net) |
| 06:26.01 | syle | what you paying? |
| 06:26.04 | syle | for outbound |
| 06:26.42 | syle | i like this site cept i am canadian so doesn;t help me alot |
| 06:26.51 | syle | not much for CDN area codes lol |
| 06:27.07 | infinity1 | i just checked. i'm paying 2cents both ways |
| 06:27.42 | syle | well anyone will knock down your outbound calling rate to 1.5 cents a minute if you prepay a couple hundred i am sure |
| 06:27.51 | syle | usually way it works |
| 06:27.59 | *** join/#asterisk ramprem (~pravin@211.24.142.6) |
| 06:28.25 | infinity1 | syle: i'm still runing a test box. i haven't put it into production so i don't have any commitments set |
| 06:28.34 | ramprem | hi guys..got a question... is there a predefined channel variable to identify the called number on asterisk? |
| 06:28.37 | syle | i;m in same boat as you then |
| 06:28.44 | Qwell | ramprem: like ${EXTEN} ? |
| 06:29.02 | ramprem | yeahhh |
| 06:29.04 | infinity1 | syle: i just gave nufone 2 bux, and teliax for inbound like 5 bux i think it was |
| 06:29.22 | syle | hows the nufone quality? |
| 06:29.31 | Qwell | I like nufone. It's all I use |
| 06:29.32 | ramprem | ${CALLERIDNUM} is a predefined variable for the calling party |
| 06:29.35 | infinity1 | i talked on it for an hour the other day. it was fine. |
| 06:29.38 | ramprem | how about the called party? |
| 06:29.39 | syle | what codec they using? |
| 06:29.53 | Qwell | syle: pretty much any |
| 06:29.57 | infinity1 | syle: i'm using g729 with them |
| 06:29.59 | syle | i ask cause anyone running g729 over gsm pisses me off lol |
| 06:30.08 | Qwell | g729 over gsm? |
| 06:30.23 | infinity1 | syle: you mean instead of |
| 06:30.25 | syle | the caller can barely hear them in g729 |
| 06:30.32 | syle | gsm i can hear them just fine |
| 06:30.46 | *** join/#asterisk cfrank (~cfrank@wsip-24-234-137-140.lv.lv.cox.net) |
| 06:31.05 | infinity1 | i'm still experimenting |
| 06:31.17 | ramprem | anyone? predefined asterisk variable for identifying the called number |
| 06:31.19 | Qwell | syle: You can use just about any codec with nufone |
| 06:31.23 | infinity1 | i have a note in my docs that says to use gsm with nufone. |
| 06:31.24 | syle | try switching between those 2 codecs, listen to how loud one is over the other |
| 06:31.46 | syle | well asterisk will autonegotiate the codec you want |
| 06:31.59 | syle | if you set gsm then nufone will be forced to send call in gsm |
| 06:32.48 | syle | i;m not done fully testing, my codec testing was done over local zap lines |
| 06:32.59 | syle | haven;t tested over sip and iax yet |
| 06:33.41 | infinity1 | syle: i've got 2 sip hardphones, 1fxo, 1fxs. |
| 06:33.56 | infinity1 | the only think i haven't been able to get working so far is disa. |
| 06:33.59 | syle | kewl which SIP hardphones you got? |
| 06:34.07 | infinity1 | gxp2000 and polycom. |
| 06:34.11 | syle | snom phones look the cheapest |
| 06:34.20 | infinity1 | haven't messed with the poly much. |
| 06:34.22 | ramprem | :( |
| 06:34.27 | syle | polycom got some good prices to i think |
| 06:34.35 | syle | cisco is just outrageous |
| 06:35.21 | syle | i was going to get a cisco then i thought what the hell for, companies aren;t going to pay cisco that price for their phone when they can buy others , stick with what everyone else uses i say |
| 06:35.32 | litage | what FXO/FXS hardware have you guys have a lot of success with developing production/commercial * boxes? |
| 06:35.37 | shido6 | ok dagnabbit |
| 06:35.41 | shido6 | wo has a di-514 |
| 06:35.42 | infinity1 | the more this shit seems like it'll actually work, the more hardware i buy |
| 06:35.46 | shido6 | with ip phones behind it |
| 06:35.51 | shido6 | Save yourslef the trouble |
| 06:35.59 | shido6 | it works but lags like hell |
| 06:36.08 | shido6 | like all friggin hell |
| 06:36.21 | syle | di-514 is what |
| 06:36.23 | syle | ata? |
| 06:36.26 | syle | or hardphone |
| 06:36.40 | shido6 | no |
| 06:36.41 | shido6 | its a router |
| 06:36.44 | shido6 | dlink router |
| 06:36.46 | shido6 | wireless router |
| 06:36.47 | infinity1 | litage: i've only used the digium card |
| 06:36.58 | shido6 | I moved all my stuff to an offsite pbx |
| 06:37.01 | syle | ohhh |
| 06:37.03 | shido6 | in case i lose power, etc |
| 06:37.09 | shido6 | I still get voicemail |
| 06:37.10 | shido6 | etc |
| 06:37.17 | syle | yeah everyone knows to only buy the di-604 dlink router lol |
| 06:37.18 | shido6 | and if im out |
| 06:37.22 | shido6 | I can go over a friends house with broadband |
| 06:37.24 | shido6 | bring my phones |
| 06:37.28 | shido6 | and be back up again |
| 06:37.42 | infinity1 | uhh... linux router guys. |
| 06:38.01 | syle | i use to use linux as a router, don;t anymore |
| 06:38.04 | infinity1 | shido6: except that sip sux ass over nat |
| 06:38.17 | infinity1 | syle: it owns |
| 06:38.32 | shido6 | I USED to use my linux box as a router |
| 06:38.37 | shido6 | but my cable modem goes out |
| 06:38.37 | syle | depends on your application infinity |
| 06:38.43 | shido6 | so the UPS and everything else is wortheless |
| 06:38.44 | shido6 | -e |
| 06:38.59 | syle | personally if i want something open i;ll just port forward from the broadband router to an internal ip port |
| 06:39.02 | shido6 | NO problems at all with the asterisk box on the local net |
| 06:39.04 | shido6 | 2 nics |
| 06:39.04 | infinity1 | syle: application? i can't think of a good reason to not use linux as your firewall/router. |
| 06:39.07 | shido6 | 1 inside 1 out |
| 06:39.09 | shido6 | that was perfect |
| 06:39.15 | shido6 | now Im experimenting with how our customers are playing |
| 06:39.21 | shido6 | and Im starting to see their problems |
| 06:39.24 | shido6 | with the routers, etc |
| 06:39.36 | syle | depends on what your doing |
| 06:39.38 | shido6 | enter the NuFone FAQ page. |
| 06:39.50 | shido6 | dont buy cheap shit |
| 06:40.00 | infinity1 | shido6: how much bandwidth does your nufone service use |
| 06:40.05 | shido6 | erf? |
| 06:40.07 | syle | only use i could see in doing it would be to order ADSL and cable modem service, put 3 nic cards in the linux box and code a perl script to switch between routes in case one fails |
| 06:40.18 | shido6 | how much bandwidth do I have locally or the entire nufone network? |
| 06:40.32 | infinity1 | shido6: is nufone at one location? |
| 06:40.36 | shido6 | no |
| 06:40.52 | shido6 | locally here at the house |
| 06:40.53 | infinity1 | shido6: what areas do you have local DIDs? just michigan right? |
| 06:40.55 | shido6 | I have 10 mbit |
| 06:40.58 | cfrank | Hello. I need sime zap help.. |
| 06:41.00 | cfrank | TDM04B (signalling=fxs_ks) not detecting remote answer. |
| 06:41.04 | shido6 | and across the border in michigan |
| 06:41.09 | shido6 | we have a crapload of bandwidth |
| 06:41.16 | sneak | "at" the internet |
| 06:41.21 | shido6 | then at our other switch office we have another - danit sneak |
| 06:41.24 | syle | shido6 you have michigan DID;s as in from a company or you actually have your own PRI line there?> |
| 06:41.25 | shido6 | you cant sneak up on ppl like that |
| 06:41.28 | shido6 | I didnt see you there |
| 06:41.31 | shido6 | whats UP!? |
| 06:41.40 | sneak | the sky, the ceilin' - how you feelin'? |
| 06:41.43 | shido6 | hehe |
| 06:41.53 | shido6 | I wanted to blow away my linux box here |
| 06:41.58 | shido6 | to make it a pvr only box |
| 06:42.00 | sneak | i wanted to blow away some people here |
| 06:42.03 | shido6 | so I oved everything offsite |
| 06:42.06 | shido6 | blew away the box |
| 06:42.08 | shido6 | and Im pissed |
| 06:42.09 | sneak | but it had nothing to do with magnetic media |
| 06:42.44 | shido6 | di604, eh? |
| 06:42.45 | syle | i;m gonna be doing webhosting on the side to if anyone wants to host a site on a 8 gig, dual 3.2 processor, scsi raid 5 machine let me know, paid 10k for this server not doing alot right now |
| 06:42.57 | shido6 | 10k |
| 06:42.58 | shido6 | ouch |
| 06:43.04 | shido6 | where are you syle? |
| 06:43.08 | syle | yeah cause its DELL |
| 06:43.16 | syle | warantee and all lol |
| 06:43.18 | shido6 | better be a dan itanium |
| 06:43.20 | shido6 | mmmmm |
| 06:43.21 | shido6 | mmmm |
| 06:43.25 | shido6 | you cant say DAMN without the M |
| 06:43.31 | syle | i am in canada, my server is in california |
| 06:43.34 | infinity1 | heh |
| 06:43.35 | shido6 | ahh |
| 06:43.37 | shido6 | where in canada? |
| 06:43.41 | shido6 | canadia, rather |
| 06:43.43 | syle | winnipeg |
| 06:43.48 | shido6 | ontario here |
| 06:43.49 | Qwell | weird, I read that as "where is canada"? |
| 06:43.50 | infinity1 | i have a server in downtown san jose, ca. |
| 06:43.58 | shido6 | windsor and toronto both sometimes |
| 06:44.01 | shido6 | and ottawa |
| 06:44.12 | syle | contract work? |
| 06:44.25 | shido6 | no, Im eventually going to prove that we can handle Canadia |
| 06:44.31 | shido6 | and add it to NuFone |
| 06:44.38 | shido6 | but its difficult |
| 06:44.40 | syle | hell i hated driving from hamiliton to toronto when i use to live there hehe |
| 06:44.48 | shido6 | I need SLA's and direct links to our nufone net |
| 06:44.52 | shido6 | which is costly |
| 06:45.17 | shido6 | wanna help? |
| 06:45.25 | shido6 | I already have 8xx numbers and toronto dids |
| 06:45.36 | syle | i think ontario is kewl, as long as you don;t live directly in toronto so you can appreciate having a car vs the subway, also real estate prices suck there hehee |
| 06:46.01 | shido6 | the ladies love us tho |
| 06:46.27 | syle | i can help sure |
| 06:46.36 | syle | i been wanting a reason to setup a PRI line here |
| 06:47.14 | syle | works out to about 30 bucks a channel in wpg from prices i;ve researched all week lol |
| 06:47.42 | shido6 | why should I get a di 604? |
| 06:47.53 | shido6 | syle, syle syle |
| 06:47.56 | shido6 | you think too small |
| 06:48.01 | shido6 | get a couple ds3 |
| 06:48.02 | shido6 | s |
| 06:48.25 | syle | hahah i will think ds3 when i can afford to get my money back on a line like that |
| 06:48.30 | shido6 | how serious are you , because there's a guy in your area |
| 06:48.34 | shido6 | I used to do biz with |
| 06:48.38 | shido6 | who can help you with that area |
| 06:48.46 | shido6 | cousins with the simpsons guy |
| 06:48.51 | shido6 | groening |
| 06:48.54 | syle | hmm what do you need exactly? |
| 06:48.56 | shido6 | I cant pronounce nor spell his name |
| 06:49.36 | shido6 | to take over the world, syle |
| 06:49.41 | syle | haha |
| 06:49.50 | Qwell | one province at a time, eh shido6? |
| 06:49.55 | shido6 | mmm, yes - they all laugh, in the beginning |
| 06:50.02 | shido6 | damn right Qwell |
| 06:50.04 | syle | well i am more than willing to help you with winnipeg |
| 06:50.21 | Qwell | shido6: expand to California, and I'm your man. :p |
| 06:50.27 | shido6 | funny u mention that |
| 06:51.01 | shido6 | let me send a snowball over to jerjer to get that rolling downhill, how many people do you have interested for Cali? |
| 06:51.13 | Qwell | shido6: like none, heh |
| 06:51.23 | shido6 | err |
| 06:51.29 | shido6 | if you build it they will come? |
| 06:51.33 | shido6 | no..... |
| 06:51.37 | *** join/#asterisk jeffgus (~jeffgus@greengables.zimage.com) |
| 06:51.41 | shido6 | u can have the network |
| 06:51.44 | shido6 | you can have the gear |
| 06:51.47 | shido6 | if people dont know |
| 06:51.53 | shido6 | you're gonna go bankrupt |
| 06:52.18 | bankrupt | whats wrong with that? |
| 06:52.26 | Qwell | ha |
| 06:52.55 | infinity1 | shido6: you need customers. there is no way to know customers of ds3 magnitude without a bus first |
| 06:53.00 | syle | di-604 because it is the most stable broadband router, works with xbox etc as well, if you saw my house though you;d know why a good router is important, i must have like 15 ethernet lines running to diff parts of my house, even dedicated xbox and playstation ports on my switch lol |
| 06:53.13 | shido6 | well my xbox works FINE behind the dlink |
| 06:53.19 | shido6 | 514 |
| 06:53.23 | shido6 | no correction |
| 06:53.26 | Qwell | linux box router |
| 06:53.29 | shido6 | I was using linux at the time |
| 06:53.29 | infinity1 | dlink? spare me. |
| 06:53.35 | shido6 | I used the dlink as a switch |
| 06:53.52 | shido6 | ok syle |
| 06:53.52 | infinity1 | dlink is nutz. did you see their enterprise products? |
| 06:53.55 | shido6 | xbox modded? |
| 06:53.58 | infinity1 | i about died laughing when i saw that |
| 06:54.06 | *** join/#asterisk djin_ib (~djin_ib@gridfox.xs4all.nl) |
| 06:54.09 | syle | hell yeah with every emulator you can imagine and 120 gig drive |
| 06:54.10 | Qwell | infinity1: link? |
| 06:54.14 | shido6 | syle |
| 06:55.01 | syle | i have about 50 xbox games, couple playstation, couple hundred nintendo, snes, bunch of mp3 and movies etc |
| 06:55.04 | infinity1 | 'Preferences will be here, someday' |
| 06:55.07 | syle | all on that one drive |
| 06:55.11 | Qwell | infinity1: yeah, I like that too |
| 06:55.13 | infinity1 | 'FAQ will be somewhere, someday' |
| 06:55.18 | shido6 | ftp , syle? |
| 06:55.23 | *** join/#asterisk chris78 (~schulte@gate.sympat.de) |
| 06:55.30 | *** join/#asterisk limbique (~limbique@nl-ifw-oss.orcagroup.com) |
| 06:55.31 | infinity1 | :) |
| 06:55.34 | limbique | good morning |
| 06:55.39 | shido6 | I use c xbox and quix |
| 06:55.46 | shido6 | and ftp |
| 06:55.53 | shido6 | do you use any of these for your xbox? |
| 06:55.54 | syle | you wouldn;t want an ftp dude, outbound bandwidth sucks on ADSL |
| 06:56.11 | syle | don;t keep them on my remote server or it would be fast hehe |
| 06:56.37 | syle | shido what i do personally |
| 06:57.00 | syle | is i have a program installed that when i rent blockbuster games, if i like them it copies them directly to the drive |
| 06:57.02 | syle | that is the best way |
| 06:57.06 | infinity1 | shido6: whats it cost to get a ds3 for pstn @ a datacenter? |
| 06:57.08 | syle | + you know if you like them :) |
| 06:57.09 | *** join/#asterisk gres (~gres@81.222.48.242) |
| 06:57.16 | shido6 | syle - pxHD |
| 06:57.29 | shido6 | do you ahve a list of games? |
| 06:57.30 | *** join/#asterisk yxa (empty@cm121.gamma228.maxonline.com.sg) |
| 06:57.33 | shido6 | ive been looking for top spin |
| 06:57.42 | shido6 | and a few others |
| 06:57.46 | limbique | Anyone known with the asterisk manager api? |
| 06:57.51 | syle | not off hand |
| 06:58.00 | limbique | i get this event: newchannel SIP/orca5-fb2b with state Ring |
| 06:58.11 | syle | i only buy xbox games i play online |
| 06:59.34 | limbique | anyone knows if that orca5 is the name of the phone or de username it logons with |
| 07:00.04 | infinity1 | limbique: its the name of the whale @ seaworld |
| 07:00.57 | shido6 | wow |
| 07:00.57 | limbique | hehe |
| 07:01.02 | shido6 | i must be living under a rock |
| 07:01.08 | shido6 | when did dlink have so much gear on their site |
| 07:01.12 | limbique | it's the name of our company.. :P |
| 07:01.27 | syle | what channel banks you guys using? |
| 07:01.37 | shido6 | adtran, rhino, carrier access |
| 07:01.48 | shido6 | and one zhone that is collecting dust |
| 07:01.55 | limbique | so, nobody knows? |
| 07:02.07 | syle | funny how you you mention your from canada, i can;t find crap on ebay for channel banks |
| 07:02.19 | shido6 | syle - what do you need |
| 07:02.21 | syle | you got a url to a suppiler? |
| 07:02.21 | shido6 | I have a connect here |
| 07:02.30 | shido6 | I should setup a URl |
| 07:03.23 | syle | i need a supplier |
| 07:03.34 | syle | i plan on approaching companies to setup voip for them soon |
| 07:04.06 | syle | these businesses are small like 10 people or so |
| 07:04.33 | shido6 | sweet |
| 07:04.34 | Qwell | syle: thing bigger :p |
| 07:04.37 | shido6 | I have hardware |
| 07:04.40 | Qwell | think* |
| 07:04.41 | shido6 | channel banks |
| 07:04.52 | Qwell | I want to try to get the contract for my company... |
| 07:04.52 | shido6 | memory, cpu's |
| 07:04.53 | shido6 | mobo's |
| 07:04.55 | Qwell | 190,000 employees |
| 07:04.56 | shido6 | graphics cards |
| 07:04.57 | shido6 | etc |
| 07:05.00 | Qwell | should net me a pretty penny |
| 07:05.34 | *** join/#asterisk bjohnson (~bjohnson@i216-58-63-248.igs.net) |
| 07:05.39 | *** join/#asterisk Martohtar (Martohtar@82.196.218.80) |
| 07:06.36 | *** join/#asterisk vuvie (~vuvie@bb219-74-45-31.singnet.com.sg) |
| 07:06.39 | Qwell | If you're going to setup companies phone system, whats a good amount to charge? Would most people do it per user? |
| 07:07.07 | CpuID | as in, a server, all the configs, and the handsets? |
| 07:07.18 | Qwell | yeah, everything |
| 07:07.25 | CpuID | hmm, id say do it as a package |
| 07:07.32 | Qwell | (not including the recurring costs, like service) |
| 07:07.35 | CpuID | ya |
| 07:07.49 | CpuID | well, it might be easy enough to do it as an outright cost, to cover initial config and server itself |
| 07:07.50 | Qwell | So, 100 users, what would you say? |
| 07:07.51 | CpuID | then do a per handset cost |
| 07:07.55 | CpuID | that might be best |
| 07:08.03 | CpuID | i havent had to work it out exact myself yet |
| 07:08.19 | CpuID | but yea, that would be smart id say, make a little margin on the handsets, and add a little extra for time to configure each handset |
| 07:08.40 | CpuID | depends on the type of handsets as to what kinda price per handset youd charge |
| 07:08.58 | CpuID | but most people that pay for phone systems would be used to paying an initial system cost plus a handset cost id think |
| 07:10.34 | *** join/#asterisk Wonka (produziert@wonka.support.madwifi) |
| 07:11.46 | Qwell | would you say its usually better to talk to new companies (who wouldn't have a system yet), or existing companies? |
| 07:11.59 | syle | existing |
| 07:12.05 | syle | they try to save money |
| 07:12.11 | *** join/#asterisk Jinxy (~UNIX@MTL-HSE-ppp195235.qc.sympatico.ca) |
| 07:12.15 | Jinxy | hello everybody |
| 07:12.16 | Jinxy | good morning |
| 07:13.04 | CpuID | ya |
| 07:13.19 | CpuID | new companies will think any phone system is expensive |
| 07:13.23 | *** join/#asterisk Myshenka (~gunde@217.9.101.85) |
| 07:13.35 | CpuID | unless they are run by someone who has some business experience, and knows that things cost money |
| 07:13.36 | Qwell | CpuID: good point |
| 07:13.36 | Jinxy | I would somebody to explain this to me in english please: |
| 07:13.40 | Jinxy | "This card supports both voice and data modes on its single span. For example, the card can support 12 channels dedicated to voice and 12 to data while passing all traffic through to the Asterisk Open Source PBX, which reliably routes the channels to their designated locations. This eliminates the need for an external router." |
| 07:14.17 | CpuID | existing companies, especially ones looking to upgrade their phone system anyways, are good targets |
| 07:14.26 | Jinxy | I know I need the T1 card for my channel bank, but what that says is confusing me |
| 07:14.26 | CpuID | because they have outlaid for other systems in the past |
| 07:14.44 | syle | what do you guys think about video phones? i don;t think people would want to be seen lol, just waking up in the morning...oww shit the phone , my hair is not done hahaaa |
| 07:14.49 | CpuID | either if their wanting to add more handsets to a system that cant handle more, or for other reasons |
| 07:14.58 | Qwell | syle: in conference rooms |
| 07:15.03 | Jinxy | syle, put tape on the camera ;) |
| 07:15.09 | CpuID | syle, lol yea i think video phones have a place and time, but not for everything |
| 07:15.15 | Jinxy | use handy man's secrete weapon; duct tape |
| 07:15.17 | CpuID | LOL Jinxy |
| 07:15.48 | Jinxy | so, anbody care to explain what I posted from description from digium's t1 pci card |
| 07:16.01 | Jinxy | I've got the channel bank and the whole shabang, just need the card to hook things up |
| 07:16.16 | Qwell | Jinxy: Is your T1 voice and data? |
| 07:16.35 | Jinxy | Qwell, no T1 |
| 07:16.39 | Qwell | or, its not even for a T1, is it? Just straight to the channel bank? |
| 07:16.41 | Jinxy | I've got 4 pots lines |
| 07:16.44 | Qwell | yeah, don't worry about it then |
| 07:17.10 | Jinxy | so I've got a FXO card in the channel bank for that, it is quad so it will handle it |
| 07:17.13 | *** join/#asterisk onkeltimm_ (~chatzilla@213-84-102-203.adsl.xs4all.nl) |
| 07:17.17 | Qwell | its just saying it CAN support both voice and data. If you're only doing one, it'll be fine |
| 07:17.20 | onkeltimm_ | helay |
| 07:17.49 | Jinxy | Qwell, pots -> channel bank -> phones |
| 07:18.00 | Jinxy | -> channel bank -> T1card -> PBX |
| 07:18.15 | Qwell | pstn > * > pri card > channel bank > phones ? |
| 07:18.21 | Jinxy | but, the 12 number confuses me, does that mean pbx can not control more than 12 extensions on the channel bank |
| 07:18.36 | Qwell | Jinxy: no, 12 is an example for the voice/data split T1s |
| 07:18.49 | Jinxy | so, in theory it can handle all 24 of em? |
| 07:18.58 | Qwell | yeah |
| 07:19.14 | Jinxy | for instance say, I had all 24 of them dedicated to extensions, while telephone was being handled by SIP etc, so it will be fine? |
| 07:19.16 | syle | hell go pstn > * > ds3 card > channel bank > phones , go big like shido |
| 07:19.34 | Jinxy | hah, this is home, can't afford expensive shit |
| 07:19.42 | Jinxy | hell, the t1 card is so expensive for its size |
| 07:19.45 | Qwell | wtf, you have a channel bank at home? |
| 07:19.52 | Jinxy | yes ;) |
| 07:19.54 | syle | i been wanting a channel bank at home |
| 07:19.59 | Qwell | and you're complaining about cost. :p |
| 07:20.12 | syle | more individual control on every line would be kewl |
| 07:20.16 | Jinxy | well, didn't cost me much on the channel bank and the rest of the gear |
| 07:20.43 | Jinxy | most of the other stuff I already had home, got a nice frame rack, a boat load of patch panels and home run cat3 in the house |
| 07:21.03 | Jinxy | there are currently only 12 phones, but I didn't want the t1 card to limit me to only 12 |
| 07:21.10 | Jinxy | that is why I inquired |
| 07:21.35 | syle | i been wanting to rewire this house, i wanted to get a lockable metal box, peiced of wood, and mark what line goes to what in the house on the patch panels |
| 07:21.47 | Jinxy | heck, who needs 4 separate phone lines at home? ;) |
| 07:22.08 | Jinxy | I am prolly gonna shift all my ld over to voipjet or some decent unlimited voip provider |
| 07:22.26 | Qwell | "unlimited" is generally one call at a time |
| 07:22.34 | syle | i would read the fine print, its unlimited till you go over 500 minutes or some shit |
| 07:22.37 | Jinxy | Qwell, yes of course |
| 07:22.52 | Jinxy | out of our 4 pots lines, only can do ld |
| 07:22.56 | syle | might as well prepay by the minute on your asterisk box, why have a contract with anyone |
| 07:23.00 | Jinxy | *one* |
| 07:23.19 | Jinxy | syle, I've calculated our NA ld uses for the past few months |
| 07:23.31 | Jinxy | its /min cost goes a lot more than I would pay a voip provider |
| 07:23.40 | syle | ahhh |
| 07:23.46 | Jinxy | and then, I could afford to dump one of my pots lines too |
| 07:23.52 | Qwell | Jinxy: it might go a lot more then an unlimited provider would allow |
| 07:23.59 | Qwell | Jinxy: how many minutes per month are we talking? |
| 07:24.16 | Jinxy | Qwell, 100 to 200 bux/mon |
| 07:24.23 | Jinxy | that is /min |
| 07:24.28 | syle | if you go over their set minutes jinxy they just gonna call you to upgrade your plan anyways |
| 07:24.31 | Qwell | how many minutes is that? |
| 07:24.36 | Jinxy | I think my current rate is like 5c/min |
| 07:24.38 | Qwell | syle: or shut you off |
| 07:24.53 | Jinxy | let me calculate |
| 07:25.13 | syle | 5c a minute ouch |
| 07:25.21 | Jinxy | syle, cannuck |
| 07:25.30 | ady | i have a question regarding fax i am not be able to rceive faxes from outside using spandsp version 0.0.2pre18 giving "Training failed (sequence failed)" errror |
| 07:25.34 | Jinxy | anyhow, it is between 2k & 4k mins |
| 07:26.03 | ady | sorry for resending |
| 07:26.03 | Jinxy | heck, I could even afford their unlimited biz plans, but they better keep em unlimited ;) |
| 07:26.19 | Jinxy | I wonder though, would somebody like Primus complain? |
| 07:26.27 | syle | ady just use one of your zaptel ports |
| 07:26.32 | syle | exten => fax,1,Dial(${PORT2}|20,t) ; send faxes to other port |
| 07:26.46 | Qwell | Jinxy: some companies have an unstated limit of about 5,000 minutes |
| 07:26.47 | Jinxy | it ain't exactly a mom 'n pop provider |
| 07:26.54 | Qwell | broadvoice will shut you off after like 3 months of that I think |
| 07:26.59 | Jinxy | ah, I will stay a lot lower than that |
| 07:27.14 | *** join/#asterisk imcdona (imcodna@dsl081-001-073.sea1.dsl.speakeasy.net) |
| 07:27.18 | Jinxy | that sucks :( |
| 07:27.22 | imcdona | I need some help... |
| 07:27.26 | imcdona | I am at a loss... |
| 07:27.31 | Jinxy | I think, I should test some waters first |
| 07:27.45 | imcdona | I am willing to give root access.... |
| 07:27.47 | syle | imcdona join the peacekeepers then |
| 07:27.52 | imcdona | to anyone who can help me |
| 07:27.59 | *** join/#asterisk Tili (~Tili@202-133-67-202-dialup.sat.net.pk) |
| 07:28.02 | imcdona | I almost hink there is a bug |
| 07:28.08 | Jinxy | imcdona, what is the issue? |
| 07:28.21 | imcdona | can someone help with AAH 1.3 |
| 07:28.30 | syle | haha |
| 07:28.37 | imcdona | registerin with AA1.3 |
| 07:28.42 | imcdona | with Teliaxd |
| 07:28.44 | imcdona | teliax |
| 07:29.01 | syle | cd /etc/asterisk ; vi extensions.conf |
| 07:29.06 | ady | actually i have no fax machine connected directly from my asterisk box i am using a mailfax script am i missing something |
| 07:29.11 | imcdona | for some reason....my server will NOT register..with teliax... |
| 07:29.18 | imcdona | won't even show a failed attempt |
| 07:29.29 | imcdona | like it's not in iax.conf |
| 07:29.33 | Jinxy | imcdona, go to console 7 and go to maximum verbose |
| 07:29.40 | syle | imcdona are you putting the register line in the general section of iax.conf? |
| 07:29.41 | imcdona | verbose 20? |
| 07:29.53 | syle | sounds like that is the problem |
| 07:30.09 | Jinxy | syle, does it really register with them? |
| 07:30.18 | Jinxy | I was under the impression, it only sends the packets |
| 07:30.32 | imcdona | doesn't even show a failed attempt... |
| 07:30.39 | syle | if hes saying its not even showing a register attempt hes just not putting register line in general section of iax.conf |
| 07:30.45 | imcdona | liek it;s not in IAX.conf |
| 07:30.48 | Jinxy | imcdona, how is your A@H hooked to the internet? |
| 07:30.48 | syle | easy fix |
| 07:30.57 | imcdona | public ip |
| 07:31.06 | Jinxy | direct dhcp? |
| 07:31.12 | imcdona | static ip |
| 07:31.27 | Jinxy | no firewall/nat between the box and the internet? |
| 07:31.38 | imcdona | no...public ip no firewall |
| 07:31.48 | Jinxy | good good |
| 07:31.48 | syle | i know this cause i had the same problem lol, cept i don;t use user interface like AAH so not sure about that |
| 07:32.01 | Qwell | imcdona: answer syle's question, sounds like he's right |
| 07:32.14 | imcdona | AAH is cool when it works...1.3 is giving me trouble though |
| 07:32.18 | Jinxy | I had an issue too |
| 07:32.45 | Jinxy | I was forcing asterisk to listen on local aliased interface |
| 07:32.46 | syle | qwell you can handle this one, i am not good with working with people that don;t know how to use vi hehee |
| 07:32.48 | syle | bbiab |
| 07:32.49 | imcdona | style...I I am putting the resgister line ine.. |
| 07:32.52 | imcdona | tell ya what... |
| 07:32.57 | Jinxy | that messed me up real good, wouldn't connect to iax |
| 07:33.06 | Jinxy | then, I changed that, firewall was screwing me |
| 07:33.08 | imcdona | I will post my user and pass for the interface |
| 07:33.15 | Qwell | I'm off to bed |
| 07:33.21 | Qwell | uhh, why would you do that? |
| 07:33.23 | imcdona | I am telling you...I am not missing anything |
| 07:34.28 | imcdona | can someone help me out here...take a look at my configs and confirm I am not crazy? |
| 07:34.59 | Jinxy | imcdona, I would, but I only started a few days ago |
| 07:35.10 | imcdona | I have done this tons of times....ever since 1.3 of AAH I have had problems |
| 07:35.13 | Jinxy | I do have extensive * experience, but only 2~3 days of * |
| 07:35.29 | imcdona | thanks Jinxy....I appreciate it |
| 07:35.43 | Jinxy | oops, the first * meant *NIX |
| 07:36.07 | Jinxy | imcdona, why don't you try free trial account for voipjet? |
| 07:36.40 | imcdona | I have been using Teliax...and Voicepulse... |
| 07:36.43 | imcdona | actually... |
| 07:37.06 | Qwell | bed |
| 07:37.15 | imcdona | I think I am going to try voicepulse...just for grins seeing as how I haevnt done that yet |
| 07:37.45 | Qwell | don't automatically assume its the provider |
| 07:38.17 | imcdona | The way I look at it...with "iax2 debug" |
| 07:38.25 | imcdona | I should see something |
| 07:38.31 | imcdona | and I do not |
| 07:38.35 | Qwell | Did you ever answer syle's question? |
| 07:38.35 | imcdona | I see NOTHING |
| 07:38.39 | Qwell | no, you did not. |
| 07:38.48 | Jinxy | imcdona, I don't see jack with that either and my iax2 connectivity works fine |
| 07:38.55 | imcdona | like the register line is missing from IAX.conf |
| 07:39.09 | Qwell | imcdona: LISTEN TO syle |
| 07:39.22 | Qwell | Thats EXACTLY what would happen |
| 07:39.27 | imcdona | yes I did answer sytls question...I DO HAVE THE REGISTER LINE |
| 07:39.37 | Qwell | in general? |
| 07:39.40 | imcdona | imcdona:ee78e805@voip-co1.teliax.com |
| 07:39.46 | Jinxy | interesting, I am not using any such lines |
| 07:39.50 | imcdona | password changed of course |
| 07:40.07 | Qwell | <syle> if hes saying its not even showing a register attempt hes just not putting register line in general section of iax.conf |
| 07:40.13 | Qwell | Thats not difficult to understand... |
| 07:40.18 | Qwell | anyhow, bed. |
| 07:40.30 | imcdona | I almost wonder if it AAH |
| 07:40.59 | imcdona | I agree qwell |
| 07:41.14 | imcdona | damn 12:38am....and still bangin my head |
| 07:41.25 | Qwell | so try listening to what people have to say |
| 07:41.41 | Qwell | You've lost any help I would have offered by not doing so |
| 07:42.01 | imcdona | qwell.....what are you saying? I would love to have your help |
| 07:42.11 | Jinxy | why don't you set it up like it is in; http://chayden.net/Asterisk/SeUpAsteriskAtHome.htm |
| 07:42.13 | imcdona | ?? |
| 07:42.18 | Jinxy | reload your stuff, so it replaces your .conf files |
| 07:42.24 | Qwell | imcdona: Read what syle said until it makes sense, then fix it |
| 07:43.18 | imcdona | Style said to check the register line...yes? I Already have..am I missing something? |
| 07:43.33 | Qwell | IS IT IN THE GENERAL SECTION OF iax.conf?! ffs man |
| 07:43.48 | imcdona | Qwell...just a sec... |
| 07:43.58 | Qwell | That couldn't possibly be any more clear. |
| 07:44.04 | Qwell | I don't even care anymore, I'm going to bed. |
| 07:44.40 | imcdona | http://pastebin.com/313108 |
| 07:44.42 | *** join/#asterisk afv-13 (~NetCB@tbnb-165-195-204.telkomadsl.co.za) |
| 07:44.42 | syle | well sleep well on the fact most of us in here i am sure have tons of years of unix exp, just not a few hehe |
| 07:44.43 | imcdona | iax.conf |
| 07:45.39 | Qwell | That was possibly the most worthless paste I've ever seen. Where's the rest of it? |
| 07:45.46 | imcdona | http://pastebin.com/313109 |
| 07:45.56 | afv-13 | i've connected my fax machine to my pbx though a fxo module, and setup an extension to test to dial it but i'm failing |
| 07:46.03 | imcdona | have a look... |
| 07:46.17 | Qwell | and, where is the third? |
| 07:46.29 | imcdona | just a sec.. |
| 07:46.35 | Qwell | and which is which? |
| 07:46.36 | syle | hmm voicejet at 1.3 cents a minute |
| 07:46.40 | *** join/#asterisk af_ (~af@ip-131-22.sn2.eutelia.it) |
| 07:46.41 | syle | quality good? |
| 07:46.56 | syle | voipjet |
| 07:47.02 | Qwell | and shouldn't it be register => ? |
| 07:47.09 | Jinxy | syle, I tried their 0.25 free, it worked ok |
| 07:47.15 | imcdona | no iax_custome.conf |
| 07:47.36 | imcdona | first is iax.conf |
| 07:47.38 | imcdona | second |
| 07:47.44 | imcdona | is iax_additonal.conf |
| 07:48.55 | imcdona | Qwell....I will call you...you seem like smart guy....you figure this one out...I put $20.00 in your paypal account |
| 07:48.58 | Qwell | imcdona: use register => instead of register= |
| 07:49.14 | imcdona | hmm...just a sec.. |
| 07:50.03 | imcdona | ok so: register=>imcdona:ee78e83fca05@voip-co1.teliax.com |
| 07:50.11 | syle | jinxy do they do callerid passthrough? |
| 07:50.13 | Qwell | spaces might matter |
| 07:50.19 | Qwell | register => imcdona:blah |
| 07:50.26 | Jinxy | syle, yes |
| 07:50.29 | Qwell | I always use spaces...it might, I don't know. Make sure though |
| 07:50.40 | Jinxy | I can specify my own #, though it doesn't work for some places |
| 07:50.54 | syle | name to right? |
| 07:51.00 | Jinxy | that I didn't try |
| 07:51.03 | imcdona | Qwell.....easy 20 bucks...what's you number |
| 07:51.07 | imcdona | pm me |
| 07:51.09 | Jinxy | how do you do that? I can test it right now |
| 07:51.15 | Qwell | imcdona: number for what? |
| 07:51.27 | imcdona | I want to call you |
| 07:51.34 | syle | kewl well 1.3 cents a minute cheapest i;ve seen |
| 07:51.37 | Qwell | its kinda 1am here |
| 07:51.46 | Jinxy | syle, how do you specify outbound name/ |
| 07:51.48 | imcdona | ok then... |
| 07:52.00 | syle | jinxy setCID |
| 07:52.05 | Qwell | Did that work, or no? |
| 07:52.08 | Jinxy | I don't exactly like "Unknown Name' ;) |
| 07:52.13 | syle | errr |
| 07:52.15 | imcdona | no qwell... |
| 07:52.16 | Jinxy | syle, let me try it |
| 07:52.18 | syle | setCIDName |
| 07:52.20 | afv-13 | does anyone know how to transfer/forward a recieved call to a device that doesn't actually have a number? |
| 07:52.21 | Qwell | Did you reload? |
| 07:52.31 | imcdona | yes... |
| 07:52.36 | imcdona | asterisk -r ...then reload |
| 07:52.39 | Jinxy | syle, I owe you a beer if it works |
| 07:52.54 | Qwell | imcdona: what does `iax2 show registry` say? |
| 07:52.58 | syle | :) |
| 07:53.15 | *** join/#asterisk seeeS (~csmall@seeeS.developer.debian) |
| 07:53.27 | Qwell | Jinxy: You can also set both at once with SetCallerID |
| 07:53.42 | Jinxy | which goes where? |
| 07:53.44 | syle | exten => yourextension,1,SetCIDName(ASTERISK TEST) |
| 07:53.50 | Qwell | dialplan |
| 07:54.01 | syle | then follow through with your normal connect to voipjet |
| 07:54.02 | imcdona | asterisk1*CLI> iax2 show registry |
| 07:54.02 | imcdona | Host Username Perceived Refresh State |
| 07:54.02 | imcdona | asterisk1*CLI> |
| 07:54.09 | Qwell | or, you could do callerid="something" in sip.conf or whatever |
| 07:54.18 | syle | its iax |
| 07:54.23 | Qwell | then iax.conf |
| 07:54.25 | imcdona | like the register stament is not in iax.conf |
| 07:54.47 | seeeS | hmm, if asterisk is not accepting connections for H.225, is that mean the phone wont work |
| 07:55.15 | syle | qwell your going to get a headach |
| 07:55.19 | Qwell | imcdona: What does your iax_additional.conf look like now? |
| 07:55.24 | Qwell | syle: bit late for that |
| 07:55.30 | syle | just take his ssh root login and add it quick and be done with it hehe |
| 07:55.56 | Qwell | syle: if it wasn't 1am, I might |
| 07:56.07 | imcdona | http://pastebin.com/313112 |
| 07:56.38 | Qwell | just for grins, try to add spaces around the => |
| 07:56.45 | syle | jinxy: does it work? |
| 07:56.49 | imcdona | ok...just a sec... |
| 07:56.49 | Qwell | I doubt it'll matter, but... |
| 07:57.01 | Jinxy | syle, gimme a sec |
| 07:57.05 | syle | think i;ll paypal 5 bucks to them and check it out if it does hehe |
| 07:57.34 | Qwell | Jinxy: tip; don't try calling your cellphone to test it :p |
| 07:57.47 | imcdona | register => imcdona:ee78efca05@voip-co1.teliax.com |
| 07:57.54 | Qwell | imcdona: right |
| 07:58.00 | Jinxy | of course, I just need to unplug all the phones in the house |
| 07:58.00 | imcdona | asterisk1*CLI> iax2 show registry |
| 07:58.01 | imcdona | Host Username Perceived Refresh State |
| 07:58.01 | imcdona | asterisk1*CLI> |
| 07:58.08 | Jinxy | this ain't exactly everybody's wakeup time ;) |
| 07:58.13 | Jinxy | or disable all the extensions |
| 07:58.32 | Jinxy | your pick, should I spend time on the puter or go downstairs to unplug circuits? ;) |
| 07:59.01 | syle | just call the damn cell phone lol |
| 07:59.11 | Qwell | syle: cell phones rarely pass cidname |
| 07:59.16 | Jinxy | they don't |
| 07:59.20 | Jinxy | anyway, gimme a min now |
| 08:00.11 | syle | hmmm |
| 08:00.17 | syle | they do here |
| 08:00.19 | syle | where you from? |
| 08:00.39 | Qwell | US |
| 08:00.41 | syle | don;t make me traceroute you |
| 08:00.43 | syle | hehee |
| 08:01.15 | Jinxy | moment of truth is here |
| 08:01.19 | syle | well i think thats because you got a cell service plan with a non telecom company in your area |
| 08:01.29 | syle | doubt they want to pay local telecom for their pbx services |
| 08:01.45 | Jinxy | call coming |
| 08:01.49 | Jinxy | interesting |
| 08:01.56 | Jinxy | fuck me blind |
| 08:02.02 | Jinxy | I had the number saved in my vista |
| 08:02.09 | Jinxy | so the stupid phone said the saved name |
| 08:02.14 | Qwell | imcdona: put the register line directly in iax.conf, instead of in an included file. The user running asterisk might not have read permission to the other files |
| 08:02.16 | syle | hahaa |
| 08:02.24 | Qwell | if that doesn't work...then I don't know |
| 08:02.38 | Qwell | put it BEFORE the #includes too |
| 08:02.47 | imcdona | ok just a sec.. |
| 08:02.55 | Jinxy | changing trunk info |
| 08:03.16 | Jinxy | dialing again |
| 08:03.27 | syle | DOS attacks of the future, forking thousands of processes to connect to an ivr menu |
| 08:03.37 | syle | tieing up all available sockets |
| 08:03.58 | imcdona | no luck...qwell..I am going to sleep on it |
| 08:04.06 | imcdona | thank you! |
| 08:04.08 | Jinxy | no name syle |
| 08:04.13 | *** join/#asterisk mountie (~mountie@24.42.99.232) |
| 08:04.16 | Jinxy | do you have to quote what is inside the () |
| 08:04.20 | Qwell | no |
| 08:04.24 | syle | nope |
| 08:04.38 | Qwell | ok, NOW I'm going to bed |
| 08:04.47 | syle | well thats gay |
| 08:04.50 | syle | how did you test? |
| 08:05.05 | Jinxy | I called one of my other home #s |
| 08:05.12 | Jinxy | pots line, that has called id from telco |
| 08:06.05 | Jinxy | is it () or {}? |
| 08:06.18 | syle | well we don;t really have any central way to connect all pbx's around the world yet |
| 08:06.30 | syle | but those fuckers should read that callername bit |
| 08:07.07 | Jinxy | you know, I love how, it won't cost me anything just as long as I dont pickup the phone |
| 08:07.17 | Jinxy | so I can keep that voip 0.25 credit forever ;) |
| 08:07.27 | Jinxy | but, I did |
| 08:07.32 | syle | hell yeah |
| 08:07.35 | Jinxy | so I lost a few cents, wanted to see voice quality |
| 08:07.41 | Jinxy | still, their rate is pretty damn cheap |
| 08:08.00 | syle | i found a guy here to that will do 1 cent a minute inbound so hell why pay anything |
| 08:08.36 | syle | you know this competition is really healthy |
| 08:08.48 | Jinxy | I guess so, as long as the comapnies keep running |
| 08:08.49 | syle | local telecoms no longer acting like their god on the phone to you |
| 08:09.02 | Jinxy | I dont want them go tits up leaving the incumbents to charge whatever the fuck they like |
| 08:09.28 | syle | well all this competition happened because of the gov;t deregulating telecoms |
| 08:09.38 | Jinxy | gonna try once again |
| 08:09.59 | *** join/#asterisk kswail (~kyndar@modemcable244.73-81-70.mc.videotron.ca) |
| 08:10.20 | syle | but rest assured in a year or 2 gov;t plans to put a per minute tax on every call and make more money |
| 08:10.36 | syle | they thought it through well |
| 08:11.34 | syle | one thing i have been enjoying watching here in canada is telecoms getting deregulated on forcing people to have phone service with them in order to have ADSL |
| 08:11.45 | Jinxy | I tried to specify 911, it didnt let it go through ;) |
| 08:12.02 | syle | jinxy |
| 08:12.05 | syle | i am curious |
| 08:12.10 | syle | do you have nufone account? |
| 08:12.15 | syle | or another account |
| 08:12.22 | syle | try cidname on another place |
| 08:12.25 | Jinxy | like I said, I am new to voip |
| 08:12.28 | syle | prob same result |
| 08:12.44 | Jinxy | I only have 4 pots now and got the voipjet because it was free |
| 08:14.18 | syle | Billing Increments |
| 08:14.18 | syle | Continental USA: six (6) second increments. |
| 08:14.18 | syle | International: thirty (30) seconds minimum and six (6) seconds thereafter. |
| 08:14.18 | syle | Mexico: sixty (60) seconds minimum and six (6) seconds thereafter. |
| 08:14.47 | syle | what is continental US |
| 08:14.58 | syle | hawaii where you live? |
| 08:20.29 | *** join/#asterisk komnieve (~ksingh@dsl081-037-205.lax1.dsl.speakeasy.net) |
| 08:20.40 | Jinxy | you sure about SetCIDName? |
| 08:21.29 | syle | yeah |
| 08:21.39 | komnieve | hi everyone |
| 08:22.02 | Jinxy | I've tried various things, it ain't working |
| 08:22.22 | komnieve | does anyone have a way to connect to the asterisk management console using amp? |
| 08:22.31 | komnieve | i can't find the asterisk pid in /var/run |
| 08:22.55 | komnieve | when i run through amp - a buddy wants a pretty gui :-) |
| 08:23.17 | syle | jinxy what does it show up as? |
| 08:23.29 | Jinxy | Unknown Name |
| 08:23.30 | tuxinator_linuxM | komnieve: I'd rather have a pretty girl |
| 08:23.39 | gordonjcp | tuxinator_linuxM: |
| 08:23.41 | gordonjcp | tuxinator_linuxM: indeed |
| 08:23.42 | komnieve | lol |
| 08:23.47 | gordonjcp | what he needs is a pretty geek chick |
| 08:23.50 | syle | setcidname is for my zap devices |
| 08:23.59 | syle | maybe their is something diff for iax/sip |
| 08:24.08 | syle | can;t see why |
| 08:24.11 | komnieve | yeah what can i say - sometimes people get really confused |
| 08:25.04 | syle | jinxy |
| 08:25.16 | Jinxy | yes sir |
| 08:25.17 | syle | http://www.voipuser.org/forum_topic_1538.html |
| 08:25.20 | syle | give this a shit |
| 08:25.22 | syle | shot |
| 08:25.40 | Wonka | "I'd rather have a pretty girl" |
| 08:26.15 | Jinxy | so |
| 08:26.20 | Jinxy | Name;number eh? |
| 08:26.46 | syle | yeah well setcalleridname should work |
| 08:27.22 | *** join/#asterisk Tili (~Tili@202-133-65-109-dialup.sat.net.pk) |
| 08:27.24 | komnieve | for a second i thought jinxy was getting into the 'pretty girl' conversation |
| 08:27.32 | *** join/#asterisk mithro (~tim@p54B135DE.dip.t-dialin.net) |
| 08:27.53 | gordonjcp | komnieve: heh |
| 08:28.05 | gordonjcp | Jinxy: yeah - you can set caller ID to display names and numbers |
| 08:28.32 | *** join/#asterisk mbranca (~matteo@81.208.92.210) |
| 08:30.09 | Jinxy | forbidden |
| 08:30.15 | komnieve | so any ideas on how to get around a 'unable to connect to remote asterisk' error even though ps shows a version running? i know the command isn't finding the pid in /var/run - but after that i'm stuck |
| 08:30.42 | syle | jinxy |
| 08:31.34 | *** join/#asterisk netman973 (~maps@202.182.78.3) |
| 08:31.47 | Jinxy | did you tell me to use setCallerIDName()? |
| 08:31.52 | Jinxy | that is where asterisk choked |
| 08:31.58 | syle | callerid="Blue Phone" <(256) 999-9999> |
| 08:32.04 | syle | try adding that into iax.conf |
| 08:32.06 | syle | try again |
| 08:33.55 | syle | well what we really want is for setcalleridname to work along with setcallerid because if we have many users on our systems we want to be able to do it dynamically |
| 08:34.34 | syle | but i suppose a separate entry in sip.conf or iax.conf for every user might accomplish the same thing |
| 08:34.55 | syle | but still a pain in the ass when it comes to scripting time |
| 08:36.31 | syle | well you got another option if you want to pass CIDname in your local area code |
| 08:36.42 | syle | find someone with a PRI line there that sells DID;s |
| 08:36.50 | syle | and has calleridpassthrough |
| 08:37.44 | Jinxy | what is a DID? |
| 08:37.53 | syle | lol |
| 08:38.00 | syle | your phone number |
| 08:38.05 | syle | direct inward dial |
| 08:38.08 | Jinxy | ic |
| 08:38.08 | komnieve | http://www.voip-info.org/wiki-DID |
| 08:38.34 | Jinxy | btw, your step #s, do they have to be in a sequence? |
| 08:38.41 | Jinxy | can you skip a few? |
| 08:38.51 | Jinxy | or, how can you utilize a #? make it wait? |
| 08:39.34 | syle | ? |
| 08:39.46 | Jinxy | you know, each thing is in steps |
| 08:40.01 | Jinxy | exten => s,1,dosomething |
| 08:40.10 | Jinxy | exten => s,n,dosomething |
| 08:40.37 | syle | they have to be in sequence yeah |
| 08:40.48 | *** join/#asterisk RoyK (~roy@179.80-203-29.nextgentel.com) |
| 08:40.51 | syle | sure you can make a number wait |
| 08:40.59 | syle | exten => s,1,dosomething |
| 08:41.05 | Jinxy | I missed one, it stopped working |
| 08:41.09 | syle | exten => s,2,wait(0.5) |
| 08:41.10 | Jinxy | I was like wtf have I done now |
| 08:41.17 | syle | exten => s,3,blah blah balh |
| 08:41.44 | afv-13 | if anyone was wondering about the fax thing i was asking about: |
| 08:41.53 | afv-13 | exten => fax,1,Dial(Zap/2) |
| 08:41.53 | afv-13 | exten => fax,2,Hangup |
| 08:42.18 | afv-13 | so simple i feel embarresed |
| 08:42.19 | syle | so i was right then afv lol |
| 08:42.38 | afv-13 | lol |
| 08:42.46 | syle | didn;t i answer that like hours ago though hehe |
| 08:42.59 | afv-13 | i didn't see |
| 08:43.21 | syle | well you better search for fax in your find irc function its there :) |
| 08:43.27 | afv-13 | i had people telling to hurry and the the phones back up |
| 08:43.41 | syle | exten => fax,1,Dial(${PORT2}|20,t) ; send faxes to other port |
| 08:43.48 | syle | sound familiar? |
| 08:43.51 | Jinxy | well, nothing seems to be working |
| 08:44.26 | afv-13 | kinda |
| 08:44.30 | syle | just fuckit jinxy, its possible your telecom just doesn;t trust to let cidname through |
| 08:44.56 | afv-13 | the " |20,t " ? |
| 08:45.01 | syle | but i would try another provider for the hell of it like nufone to see if its really them or not |
| 08:45.54 | Jinxy | you know what is the difference between adtran's TA750 and 780? |
| 08:46.04 | Jinxy | both of them share same design and modules |
| 08:47.08 | syle | its just a timeout |
| 08:48.28 | Jinxy | well, I think I am gonna go ride the bike |
| 08:48.33 | Jinxy | about 5am, just the time |
| 08:49.18 | syle | kewl |
| 08:49.31 | syle | i got a honda CM450 myself |
| 08:54.17 | syle | my brother has his bike in my garage |
| 08:54.34 | syle | i sometimes just switch plates and go cruisin on that crotch rocket lol |
| 08:54.54 | syle | first gear right up to 120 km an hour |
| 08:55.51 | syle | although this city is strange it has something call sunday cruising nights |
| 08:56.07 | syle | where everyone shows off their cars all night long |
| 08:56.10 | syle | big pickup scene |
| 08:56.33 | Wonka | pickup like picking up girls? or like pickup truck? |
| 08:56.40 | syle | girls |
| 08:56.45 | Wonka | <- non-native speaker |
| 08:56.52 | syle | all sluts, if you got a bike , guaranteed lay |
| 08:57.05 | Wonka | bleah |
| 08:57.40 | syle | i;m married now but hell i can;t count how many women i slept with before i got married lol |
| 08:57.47 | Wonka | i got a bike though... |
| 08:57.56 | Wonka | Honda CB500 |
| 08:58.01 | syle | nice |
| 08:58.10 | Wonka | nothing to show off with |
| 08:58.23 | Wonka | it takes me where i want to go, and reasonably fast |
| 08:58.34 | syle | sure it is, alot better than a car hehe |
| 08:58.49 | Wonka | can't transport a computer with a bike :( |
| 08:58.58 | syle | i got a grandam and would rather ride my peice of shit cm450 lol |
| 08:59.18 | Wonka | i had a cm400t |
| 08:59.21 | Wonka | softchopper |
| 08:59.28 | syle | well if your transporting shit just get a minivan |
| 08:59.36 | syle | but keep the bike :) |
| 09:00.03 | Wonka | if i need to transport stuff, i'll rent something suitable... |
| 09:00.18 | Wonka | but not for "lets just take this there, and back in the evening" |
| 09:00.24 | syle | i;m thinking of trading in my grandam for a minivan |
| 09:00.35 | syle | pain in the ass asking friends for a truck all the time |
| 09:00.40 | syle | like this big inconvenience |
| 09:01.31 | syle | personally i never take out loans just buy straight up what i can afford |
| 09:01.36 | syle | cept my house lol |
| 09:02.16 | gordonjcp | Wonka: my flatmate hired a van for a day to move his furniture, £36 |
| 09:02.48 | Wonka | gordonjcp: too expensive for one day... |
| 09:03.09 | syle | make friends with someone with a truck |
| 09:03.20 | gordonjcp | Wonka: not really |
| 09:03.31 | Wonka | they aren't that usual here, trucks |
| 09:03.48 | Wonka | Germany |
| 09:03.51 | gordonjcp | Wonka: over here "truck" is generally 7.5 tons and up |
| 09:04.00 | syle | what do you call someone with alot of friends? |
| 09:04.03 | syle | BROKE |
| 09:04.16 | Wonka | even pickup "truck"s aren't usual here |
| 09:04.51 | Wonka | van-like things like Opel Zafira, VW Sharan, Mazda Premacy you can see everywhere |
| 09:04.56 | gordonjcp | yeah, same here |
| 09:05.06 | gordonjcp | bloody awful things |
| 09:05.06 | Wonka | smaller cars even more |
| 09:05.15 | Wonka | bloody nice cars |
| 09:05.30 | Wonka | 5 persons + stuff for 2 weeks fit in |
| 09:06.00 | gordonjcp | nah, they're slow and uncomfortable |
| 09:06.07 | Wonka | slow? |
| 09:06.11 | Wonka | Not Really |
| 09:06.29 | Wonka | 170km/h without problem. |
| 09:06.33 | gordonjcp | they handle like buses and they guzzle fuel |
| 09:06.37 | gordonjcp | yeah, that's slow |
| 09:06.56 | Wonka | driving faster isn't really possible mostly |
| 09:07.15 | Wonka | they handle better than several smaller cars |
| 09:07.48 | gordonjcp | if you do less than about 140km/h on the motorways here, some old lady in a Yugo will rear-end you |
| 09:07.59 | syle | you got high gas prices to? |
| 09:08.17 | gordonjcp | s/gas/petrol/ , yes - ish |
| 09:08.18 | syle | in north american fucking japanese bought up so much gas raised prices on us everywhere |
| 09:08.21 | gordonjcp | not as bad as some places |
| 09:08.31 | gordonjcp | LPG is very cheap |
| 09:08.32 | afv-13 | damn |
| 09:08.51 | gordonjcp | well, the diesel ones |
| 09:09.11 | gordonjcp | 26p/l *if* you pay the taxes :-) |
| 09:09.48 | afv-13 | R5.56/l |
| 09:10.03 | *** join/#asterisk djin (~djin@213-132-172-4.multikabel.nl) |
| 09:10.09 | *** join/#asterisk zoa (~zoa@pirus.securax.be) |
| 09:10.21 | afv-13 | can't quote currency on irc, yours makes as much sense to me as mine does to you |
| 09:10.29 | gordonjcp | heh |
| 09:10.36 | gordonjcp | afv-13: where are you? |
| 09:10.42 | afv-13 | south africa |
| 09:10.47 | gordonjcp | ok |
| 09:11.11 | afv-13 | about 12:1 i think |
| 09:11.54 | Wonka | we never got our Premacy (which has a ~100PS Turbodiesel) over 7.5l / 100km |
| 09:12.03 | Wonka | even driving 170km/h |
| 09:12.39 | Wonka | diesel costs 1.119 EUR / l at the moment |
| 09:12.39 | *** join/#asterisk pbxbart (~pbx111@p54B01036.dip0.t-ipconnect.de) |
| 09:12.47 | pbxbart | hello |
| 09:13.47 | pbxbart | i would like to test the regiter proccess of asterisk. But if i try to use sipsak -UI I alwas recive 403 Forbidden |
| 09:15.37 | pbxbart | the problem seams to be that the sipsak removes the username from the uri but asterisk need the full uri |
| 09:15.44 | pbxbart | can anyone confirm this? |
| 09:17.50 | gordonjcp | Wonka: I used to have a Citroen CX 25DTR, with a modified turbo and fuel pump |
| 09:18.28 | gordonjcp | Wonka: it would tow a 2.5 tonne trailer (heavy trailer and a Saab 9000) at around 140km/h without straining |
| 09:18.43 | Wonka | hehe |
| 09:23.44 | gordonjcp | Wonka: guess who forgot there was a trailer on the back? |
| 09:23.53 | tzafrir | pbxbart, I never managed to have any luck with sipsak as a test tool |
| 09:24.31 | gordonjcp | getting dark, getting late, "This car's going like a bucket of crap, wtf is wrong with - Shit, wtf is that behind me?! Ah oops" |
| 09:24.56 | tzafrir | It needed so much messing that when we were done we didn't know if we're really properly emulating a SIP connection |
| 09:26.09 | DarthClue | http://www.darthclue.org/archives/5-Shameless-Plug.html |
| 09:27.12 | Wonka | lol |
| 09:30.33 | RoyK | hm. got this price list from a company, but wtf do they mean by "russia overlay"? |
| 09:32.22 | *** join/#asterisk Romik_ (~romik@1.fix.netvision.net.il) |
| 09:38.20 | RoyK | ~docs |
| 09:38.20 | jbot | Documentation can be found at http://digium.com/index.php?menu=documentation or http://www.digium.com/handbook-draft.pdf or #asterisk-doc, or http://www.voip-info.org/wiki-Asterisk, or http://www.asteriskdocs.org |
| 09:38.54 | tzafrir | That's nice. a new change applied to recent 2.6.13 rc3 allows manually binding and unbinding devices to drivers |
| 09:40.30 | *** join/#asterisk toot (chris@212.20.250.186) |
| 09:41.29 | RoyK | tzafrir: what does that give you? |
| 09:42.21 | *** part/#asterisk afv-13 (~NetCB@tbnb-165-195-204.telkomadsl.co.za) |
| 09:43.26 | tzafrir | faster loading? |
| 09:43.34 | tzafrir | when done right |
| 09:44.04 | tzafrir | and I can think of a number of times in the past yead where such a feature could have helped me |
| 09:44.07 | toot | does it matter where the modules are plugged in on my TDM400P card? i have the 2 FXO plugged in nearest the bracket |
| 09:46.19 | seeeS | does asterisk handle H.225 requests? |
| 09:48.50 | pbxbart | no one has a hint for my sipsak problem? |
| 09:49.18 | *** join/#asterisk puzzled (~patrick@213.84.38.78) |
| 09:49.23 | puzzled | morning |
| 09:50.06 | tzafrir | noon |
| 09:50.06 | DarthClue | pbxbart: never used sipsak. i know that a few people have, but most of them won't be around for several more hours. |
| 09:50.50 | DarthClue | 5am, no sun, not quite morning just yet. |
| 09:50.59 | toot | okay, just got my tdm400p - plugged it in, should it be reported as a Tiger Jet Network Comm controller? |
| 09:51.09 | DarthClue | toot: usually |
| 09:51.15 | toot | cool. ta |
| 09:51.51 | toot | i have 2 fxo, and 1 fxs modules on it, does it make any difference what way they are plugged in? |
| 09:52.02 | toot | other than to your config files that is |
| 09:52.25 | DarthClue | on the card, no. but with the lines, yes. make sure you have the lines connected properly or you will damage the card. |
| 09:52.57 | toot | cool - ain't got that far so thanks :) |
| 09:53.32 | toot | erm, how do i know which to plug in (sorry, dafy q) there are 4 slots and only 3 cards .. |
| 09:53.56 | tzafrir | well, look at /proc to see where exactly they are |
| 09:54.05 | tzafrir | naturally this can be automated |
| 09:54.09 | tzafrir | ~genzaptelconf |
| 09:54.09 | jbot | from memory, genzaptelconf is a script to general zaptel.conf and zapata.conf snippet for TDM cards, availble from http://tzafrir.org.il/genzaptelconf or from the Rapid zaptel packaged. Ask tzafrir about it. ignore warning about missing ast-cmd. |
| 09:56.53 | toot | /proc/zaptel is empty :) and cheers for the url |
| 09:59.09 | RoyK | wtf is "russia overlays"? |
| 10:03.40 | ady | can anyone using astfax1.0 how i integrate with asterisk i.e. call in extensions.conf |
| 10:05.17 | *** join/#asterisk potsboy (~chrisg@209.212.122.90) |
| 10:06.12 | ady | there is no help available |
| 10:06.54 | toot | um that script has gone a bit mad and keeps trying to restart asterisk, result is i have about 200mpg123 running :) |
| 10:12.01 | Ahrimanes | toot: killall would be your pal :D |
| 10:14.47 | Ahrimanes | hm killall on a solaris machine while in / ? hee |
| 10:19.16 | *** join/#asterisk toot (toot@212.20.250.187) |
| 10:19.28 | tzafrir | toot, do you refer to my script? |
| 10:19.29 | toot | hmm server died :) last i seen the load was 300 |
| 10:19.38 | tzafrir | It seems to assume that /etc/init.d/asterisk is sane |
| 10:19.55 | toot | as in will work? |
| 10:20.03 | tzafrir | yes |
| 10:20.17 | tzafrir | Alternatively: don't use -s, and stop asterisk manually |
| 10:22.09 | tzafrir | For TDM it is good enough, because the probing is only per-channel |
| 10:22.26 | tzafrir | But for pri/bri you need to remember information |
| 10:23.59 | toot | should i be seeing anything in /proc/zaptel/? |
| 10:24.21 | toot | the genzaptelconf script needs to be able to start asterisk? and mine does not start :) so its a no goer |
| 10:25.18 | *** join/#asterisk netman973 (~maps@202.182.78.3) |
| 10:30.29 | *** join/#asterisk ozJames79 (~jamesblan@CPE-2032087143.bal.ncable.net.au) |
| 10:33.57 | toot | The errors i'm getting are: http://pastebin.ca/17685 |
| 10:34.03 | tzafrir | toot, genzaptelconf generates zaptel.conf and zapata.conf |
| 10:34.03 | *** join/#asterisk MuppetMaster (~MuppetMas@177.Red-213-98-135.pooles.rima-tde.net) |
| 10:34.23 | MuppetMaster | Hello everyone. |
| 10:34.32 | MuppetMaster | Anyone know exactly what this is about?: Jul 14 12:28:18 NOTICE[11712]: rtp.c:281 process_rfc3389: Comfort noise support incomplete in Asterisk (RFC 3389). Please turn off on client if possible. Client IP: my_ip |
| 10:34.45 | tzafrir | restarting asterisk after that is a "nice to have", but you could live without it. It is not a script that is currently intended to run automatically |
| 10:35.24 | DarthClue | MuppetMaster: it means that your phone is trying to get comfort noise and it isn't supported by *. what client or phone are you trying to use? |
| 10:35.38 | MuppetMaster | DarthClue: Gizmo. |
| 10:35.47 | MuppetMaster | DarthClue: What is 'Comfort Noise'? |
| 10:35.56 | DarthClue | MuppetMaster: check your settings, you should be able to disable that. |
| 10:36.15 | tzafrir | toot, also note that it does not write directly to zapata.conf . It generates zapata-channels.conf, which you can #include in zapata.conf or just edit zapata.conf accordingly |
| 10:36.23 | DarthClue | MuppetMaster: it means that instead of hearing nothing, you would hear static or something similar so that you don't think the line is dead. |
| 10:36.36 | MuppetMaster | DarthClue: Unfortunately Gizmo is trying to be the Skype of SIP and is dumbing down what is configurble. |
| 10:36.49 | MuppetMaster | DarthClue: I posted the issue here - http://forum.gizmoproject.com/viewtopic.php?t=144 |
| 10:37.01 | toot | tzafrir - thanks for your help. when in run genzaptelconf i get Unable to connect to remote asterisk (does /var/run/asterisk.ctl exist?) |
| 10:37.35 | MuppetMaster | DarthClue: What I am trying to do is obtain a DISA to use my Asterisk to dialout instead of the prepaid Gizmo. DISA should return dialtone, but this comfort noise seems to disrupt and the Asterisk does not get the DTMFs to dial in the appropraite context. |
| 10:38.11 | DarthClue | MuppetMaster: what OS? |
| 10:38.20 | toot | the zapata-channels.conf file is empty (bar the autogenerated comments) |
| 10:38.29 | MuppetMaster | DarthClue: The Asterisk is running on SuSE 9.1 and the Gizmo on OSX 10.4.2. |
| 10:38.54 | tzafrir | toot, I believe you can ignore that. in the end it tries to connect to the running asterisk and print the output of 'zap show channels' |
| 10:39.26 | tzafrir | this is bad... |
| 10:39.41 | DarthClue | MuppetMaster: have you tried x-lite or sjphone instead? |
| 10:39.47 | DarthClue | tzafrir: what is bad? |
| 10:39.49 | *** join/#asterisk oratorloki (~krtorio@203.131.137.76) |
| 10:40.03 | tzafrir | toot, the fact that zapata-channels is empty. Sorry |
| 10:40.20 | MuppetMaster | DarthClue: I have used Xten and SJPhone with no problems. But I really like the OSX interface of Gizmo and would prefer to use that as a SIPPhone. |
| 10:40.27 | MuppetMaster | SIP softphone I mean. |
| 10:40.35 | MuppetMaster | I will try to get Gizmo to make it more Asterisk friendly. |
| 10:40.40 | MuppetMaster | An open proxy would be even better.... |
| 10:41.04 | tzafrir | toot, sadly, I don't have the time to debug it right now, sorry |
| 10:41.10 | toot | na thats fine :) thanks |
| 10:41.15 | DarthClue | MuppetMaster: I'm not an OSX user, but I'm not sure Gizmo is intended for use with *. |
| 10:42.10 | tzafrir | DarthClue, Micheal Roberts (sp?) stated that that client is not intended solely for their own network. |
| 10:42.25 | MuppetMaster | DarthClue: Well, maybe not, but let's give them a chance to see how willing they are to be Asterisk friendly. |
| 10:42.51 | DarthClue | MuppetMaster: go for it. |
| 10:43.01 | MuppetMaster | DarthClue: Michael Robinson is actively supporting DUNDi with Asterisk as part of the open number directory concept, so one would think he would want to be as friendly to Asterisk as possible. |
| 10:43.20 | MuppetMaster | DarthClue: Although Michael did misspell Asterisk at least twice in his first mail to the DUNDi list. |
| 10:43.48 | tzafrir | MuppetMaster, that whole thread left me with the impression that he still had no idea how exactly is Asterisk relevant to him |
| 10:44.02 | razu | is there any "how to" for h323 & asterisk ??? |
| 10:44.06 | MuppetMaster | tzafrir: I know, it seemed so. |
| 10:44.14 | DarthClue | http://www.darthclue.org/archives/5-Shameless-Plug.html |
| 10:44.23 | MuppetMaster | tzafrir: Which was surprising given how much of an advocate he is of opensource and all... |
| 10:44.48 | DarthClue | razu: h323 is a mystery. maybe you could try chan_woomera? |
| 10:44.48 | tzafrir | MuppetMaster, he is a great marketoid. |
| 10:44.50 | MuppetMaster | tzafrir: I appear to be the only one posting specific Asterisk issues to their forum right now, with enough community push it may change their direction. |
| 10:45.07 | tzafrir | But not that great "open source advocate" |
| 10:45.13 | MuppetMaster | tzafrir: Very true, but I would love to see a platform viable in the context of a Skype killer, and Gizmo is the closest thing out there. |
| 10:45.26 | MuppetMaster | tzafrir: He uses opensource, but doesn't necessarily contribute. |
| 10:46.03 | tzafrir | MuppetMaster, but did you note that sipphone earlier promoted gaim-phone? |
| 10:46.27 | MuppetMaster | tzafrir: I did try gaim-phone on Linux, but it wasn't that great. |
| 10:46.49 | MuppetMaster | tzafrir: The I/F on OSX with Gizmo is great, just needs chat and easier conferencing and it already surpasses what Skype has done. |
| 10:46.53 | tzafrir | I'm still not sure what do they expect to gain from thst Gizmo: merely an alternative to Skpye? |
| 10:46.56 | razu | DarthClue : i need to put 2 asterisks talking over h323 ... because of a gatekeeper ... if i didnt have the gatekeeper between, i'd use IAX between them ... |
| 10:47.29 | MuppetMaster | An open interconnected easy to use softphone for the masses. |
| 10:47.36 | MuppetMaster | Although probably without an open proxy.... |
| 10:47.40 | MuppetMaster | =( |
| 10:47.46 | tzafrir | "Open"? |
| 10:48.12 | MuppetMaster | Open in that you may call other SIP networks that accept external proxy calls and vice versa (ie - DUNDi). |
| 10:48.26 | MuppetMaster | Not necessarily opensource/open proxy. Although the latter should be a must. |
| 10:48.40 | MuppetMaster | Except that Asterisk does not have a facility for SIMPLE, really should.... |
| 10:48.45 | tzafrir | how do you call DUNDi from it? |
| 10:49.03 | MuppetMaster | Not sure today. |
| 10:49.15 | DarthClue | razu: take a look at chan_woomera ... a little more work, but maybe the best option for that setup ... http://www.pbxfreeware.org/chan_woomera/ |
| 10:50.15 | MuppetMaster | http://support.gizmoproject.com/index.php?_a=knowledgebase&_j=questiondetails&_i=61 |
| 10:50.16 | tzafrir | MuppetMaster, so it's still very much vapourware |
| 10:50.37 | razu | DarthClue : ok ... thx ... i'll take a look |
| 10:50.49 | MuppetMaster | tzafrir: One would imagine that it does this automatically behind the scenes by trying DUNDi before the proxy. |
| 10:51.19 | MuppetMaster | tzafrir: I have not had time to use a sniffer to see what happens when you do dial a number that exists within the DUNDi cloud. |
| 10:53.01 | *** join/#asterisk tessier (~treed@203.210.219.18) |
| 10:53.05 | MuppetMaster | tzafrir: I would imagine this is done at the SIPPhone proxy layer and not in the client. |
| 10:53.29 | MuppetMaster | tzafrir: Although you would still see it in the messaging with the cliennt.. |
| 10:53.31 | *** join/#asterisk Tili (~Tili@202-133-65-78-dialup.sat.net.pk) |
| 10:54.40 | *** join/#asterisk outsidefactor (chrismarti@203-206-254-183.dyn.iinet.net.au) |
| 10:57.32 | oratorloki | hello! need help in getting AgentMonitorOutgoing to work |
| 10:59.55 | oratorloki | tried to use the 'c' option to log the agent id to the channels column of the CDR |
| 11:01.47 | toot | okay just rebuilt asterisk from cvs head. still nothing in /proc/zaptel/ - any ideas or is this likely to be a case to call digium? |
| 11:02.15 | tzafrir | nothing in /proc/zaptel => no zaptel module was loaded |
| 11:02.33 | *** join/#asterisk tekati (~captain@cpe-66-75-215-63.bak.res.rr.com) |
| 11:02.36 | tzafrir | modprobe wctdm/wcfxs/fcfxo |
| 11:02.40 | toot | i modprobe'd wctdm if thats what ya mean |
| 11:02.56 | tzafrir | lsmod |grep zaptel |
| 11:03.14 | toot | zaptel 222948 - |
| 11:03.31 | tzafrir | then it has aparantly gfailed to load |
| 11:05.31 | toot | erm - any tips, ideas, pointers as to were i should go looking? |
| 11:08.46 | kajtzu | cool 7940/60 rel 7.5 is out |
| 11:09.22 | tzafrir | start with modprobe wctdm |
| 11:09.33 | Koshatul | kajtzu: i still haven't got a service contract for mine :) |
| 11:09.33 | tzafrir | dmesg |tail |
| 11:09.35 | tzafrir | later |
| 11:09.45 | Koshatul | is 7.5 really good ? i heard 7.0 was buggy |
| 11:09.57 | *** part/#asterisk oratorloki (~krtorio@203.131.137.76) |
| 11:10.28 | kajtzu | Koshatul: 7.4 is almost perfect ;-) |
| 11:10.33 | toot | Zapata Telephony Interface Registered on major 196 |
| 11:10.33 | toot | No ISA tormenta card found at d0000 |
| 11:10.34 | toot | Registered tone zone 4 (United Kingdom) |
| 11:11.02 | Koshatul | actually i bought a 7935 off ebay, but it has no power supply, and the replacement power supply is $261 AUD ex gst |
| 11:11.17 | Koshatul | kajtzu: do you have a service contract with cisco ? |
| 11:11.29 | toot | kernel is 2.6.10 if relevant |
| 11:15.08 | *** join/#asterisk zotz (~zotz@208.196.247.140) |
| 11:15.09 | Koshatul | i'll throw this into the ring, since it's quiet, I get .5-1 second drop outs intermittantly, my voip provider says it's not them (surprise) and i've tried 3 different internet connections |
| 11:16.21 | *** join/#asterisk Cresl1n (~matt@207.111.174.1) |
| 11:16.38 | kajtzu | Koshatul: sure |
| 11:17.00 | hellop | Koshatul, variable PS, $12 radio shack |
| 11:17.04 | Koshatul | i was thinking jitter correction |
| 11:17.18 | Koshatul | hellop: it has only one connection, a rj45 |
| 11:17.23 | Koshatul | it uses some kind of inline power |
| 11:17.41 | Koshatul | i've tried (and failed) with a inline psu off a polycom analog model |
| 11:17.51 | Koshatul | and a cisco aironet bridge inline psu |
| 11:18.18 | *** join/#asterisk gambolputty (~gambolput@cblmdm72-240-241-108.buckeyecom.net) |
| 11:19.16 | Koshatul | interesting is the polycom inline psu has no "output" rating on it, but i can't see them putting 240v over the wire |
| 11:20.04 | PatrickDK | they put 48v over the wire |
| 11:20.27 | tzafrir | toot, a simple 'modprobe wctdm'... |
| 11:21.02 | Koshatul | PatrickDK: same as the cisco aironet bridge ? do you know which pins ? |
| 11:21.17 | PatrickDK | hmm, that depends if it's poe, or 802.3ad |
| 11:21.30 | Koshatul | i think the aironet might be custom |
| 11:21.35 | PatrickDK | cisco used to do the power backwards |
| 11:21.41 | Koshatul | or the aironet is standard and the 7935 is custom |
| 11:21.51 | Koshatul | considering the spec for the 7935 doesn't say poe |
| 11:21.53 | toot | modprobe wctdm returns 0 and has no output |
| 11:22.00 | *** join/#asterisk djwallis81 (~djwallis8@142.afsat.com) |
| 11:22.40 | PatrickDK | heh? |
| 11:22.50 | djwallis81 | hello....i'm a complete n00b with asterisk...haven't even installed...just looking to buy hardware |
| 11:22.50 | PatrickDK | what are you attempting to find a power supply for? |
| 11:23.04 | djwallis81 | can someone assist me with recommendations? |
| 11:23.06 | *** join/#asterisk RoyK (~roy@213.160.242.93) |
| 11:23.22 | Koshatul | a cisco 7935, i purchased one off ebay with no psu, so as a side project i was going to make/rig a psu up |
| 11:23.39 | PatrickDK | hmm, check cisco's website it says on there |
| 11:23.40 | Koshatul | then i found out how little info there is on the 7935/6 psu |
| 11:23.46 | kajtzu | the 7935 isnt fun as it doesnt do sip. skinny is a pita |
| 11:23.47 | PatrickDK | it should say 802.3ad |
| 11:23.52 | djwallis81 | maybe can msg me |
| 11:23.52 | PatrickDK | or cisco poe |
| 11:23.58 | Koshatul | cisco says it comes with a inline psu |
| 11:24.18 | PatrickDK | it should say more than that |
| 11:24.22 | Koshatul | i will check again, but im sure it doesn't. one second |
| 11:25.29 | syle | toot: yum update kernel |
| 11:25.43 | syle | we are at 2.6.11 now |
| 11:26.03 | toot | so a kernel update is required - darn |
| 11:26.24 | *** join/#asterisk djin (~djin@213-132-172-4.multikabel.nl) |
| 11:26.28 | *** part/#asterisk MuppetMaster (~MuppetMas@177.Red-213-98-135.pooles.rima-tde.net) |
| 11:26.54 | toot | the difference from 2.6.10 ro 2.6.11 ...? |
| 11:27.12 | *** join/#asterisk michael1234 (~mick@202.22.163.104) |
| 11:27.18 | Koshatul | PatrickDK: the cisco site says it has a "power interface module (PIM) provides power interface and network connection", no mention of PoE or 802.3ad |
| 11:27.19 | michael1234 | how stable is 1.0.9 |
| 11:27.47 | PatrickDK | it should atleast say if it works with cisco's poe switchs |
| 11:27.48 | Koshatul | http://www.cisco.com/en/US/products/hw/phones/ps379/products_data_sheet09186a0080088849.html (the data sheet is a pdf of the page) |
| 11:28.03 | Koshatul | i don't think it does |
| 11:28.18 | djwallis81 | if i have 8 trunk lines from my telco....and i want them to connect to the asterisk...and internally its a cisco 2950 with complete ip phones....i need two Wildcard TDM400P TDM40B? |
| 11:31.05 | djwallis81 | is there someone from digium that can assist? |
| 11:31.07 | RoyK | michael1234: what are you trying to do? |
| 11:31.16 | PatrickDK | worst case: CP-7936-PWR-CS-KIT |
| 11:31.37 | RoyK | PatrickDK: ? |
| 11:31.57 | michael1234 | RoyK: I use realtime and I want to try and achieve 99.995% availability |
| 11:32.03 | Koshatul | PatrickDK: yeah, it's $261 ex GST (AUD), which is more than i paid for the unit, and i have no guarantee it works. |
| 11:32.08 | toot | what 2.6.11 are yous running syle? |
| 11:32.22 | PatrickDK | koshatul, cisco says it works |
| 11:32.26 | RoyK | michael1234: you don't get realtime on 1.0 |
| 11:32.38 | Koshatul | PatrickDK: it does, where ? |
| 11:32.45 | syle | 2.6.11-1.14_FC3 |
| 11:32.46 | *** join/#asterisk ceegee (~christian@p508A6901.dip.t-dialin.net) |
| 11:32.48 | ceegee | hello |
| 11:32.52 | PatrickDK | on the 7936 page |
| 11:32.59 | michael1234 | RoyK: Is realtime only in cvs |
| 11:33.03 | PatrickDK | but those use cisco's standard poe |
| 11:33.04 | Koshatul | but i've got the 7935 |
| 11:33.22 | PatrickDK | koshatul, but the 7936 page says it works with the 7935 |
| 11:33.29 | ceegee | is there a german speaking guru in here? :) |
| 11:33.31 | syle | figure i;ll update to 2.6.11-1.35_FC3 |
| 11:33.31 | Koshatul | ahhh |
| 11:33.35 | PatrickDK | all you need is a cisco poe adaptor, check the wiki on how to make one |
| 11:33.39 | syle | recompile my damn zaptel drivers |
| 11:33.52 | Koshatul | now i know what tomorrows project is :) |
| 11:34.19 | pbxbart | oaded symbols for /usr/lib/asterisk/modules/func_callerid.so |
| 11:34.19 | pbxbart | #0 0xb7a67943 in my_strcasecmp_8bit () from /usr/lib/libmyodbc3.so |
| 11:34.28 | pbxbart | anyoune can help me with this? |
| 11:34.32 | MikeJ[Laptop] | realtime is only in cvs |
| 11:34.54 | MikeJ[Laptop] | pbxbart, what are you trying to debug? |
| 11:34.59 | pbxbart | it is a problem with asterisk + realtime + odbc |
| 11:35.13 | pbxbart | i recive segfaults after a few minutes of load |
| 11:35.14 | michael1234 | MikeJ[Laptop]: Bugger because it crashes when you type reload sometimes |
| 11:35.17 | RoyK | michael1234: yes |
| 11:35.27 | MikeJ[Laptop] | pastebin the bt full.. |
| 11:35.30 | RoyK | michael1234: there is a hack called mysql sipfriends in 1.0 |
| 11:35.32 | RoyK | that works |
| 11:35.36 | syle | i learned this the hardway...but when you update your asterisk dir....ie: cd /usr/src/asterisk;make update.....nuke all your previous version of modules or big problems |
| 11:35.40 | RoyK | doesn't work too well, though |
| 11:35.42 | RoyK | but it works |
| 11:35.59 | michael1234 | RoyK: Is realtime getting better everyday |
| 11:36.03 | MikeJ[Laptop] | michael1234, update to head right now.. if you are getting crashes, we need to see the backtrace. |
| 11:36.14 | MikeJ[Laptop] | can you post a big to bugs.digium.com please.. |
| 11:36.29 | michael1234 | MikeJ[Laptop]: How do you output the debugs |
| 11:36.42 | MikeJ[Laptop] | we are very close to a release candidate, so we need to get these fixed.. |
| 11:36.55 | MikeJ[Laptop] | if you go to the wiki, there is a page on how.. |
| 11:36.56 | Koshatul | i had a problem ages ago between asterisk and my c7960's if they connected to a aliased adaptor, the phones would restart upon connecting |
| 11:37.14 | MikeJ[Laptop] | basically, you need to make valgrind to get the non optimized bild. |
| 11:37.29 | MikeJ[Laptop] | then start asterisk so that you can get the core, |
| 11:37.48 | MikeJ[Laptop] | then when you get the core, use gdb and do a bt and a bt full |
| 11:38.05 | pbxbart | ok |
| 11:38.38 | MikeJ[Laptop] | we really need people to follow up on these or we will never get a stable release 1.2 |
| 11:38.53 | MikeJ[Laptop] | so your help is very much apretiated.. |
| 11:38.58 | pbxbart | http://pastebin.com/313177 |
| 11:39.12 | michael1234 | cool will do |
| 11:39.22 | djwallis81 | can anyone assist....? I know my question might be to easy...but we all gotta start somewhere! I have 8 POTS lines in my current PABX....wanna change to asterisk need to know what card to buy from digium |
| 11:39.41 | toot | i'm trying to find where it tells me the kernel version i need to have for my tdm400p card - erm any tips? |
| 11:39.44 | *** join/#asterisk oratorloki (~krtorio@203.131.137.76) |
| 11:39.49 | MikeJ[Laptop] | pbxbart, bt full? |
| 11:39.51 | pbxbart | http://pastebin.com/313178 the bt full |
| 11:39.58 | *** join/#asterisk Nivex (kjotte@user-0c8hq5r.cable.mindspring.com) |
| 11:40.03 | pbxbart | sorry. this is the first time for me :-)) |
| 11:40.12 | MikeJ[Laptop] | np |
| 11:40.32 | pbxbart | seems to be a cdr problem |
| 11:40.43 | MikeJ[Laptop] | djwallis81, sizing around 8 usually hits a pricepoint where it is better to get a t1 card, and a channel bank |
| 11:40.52 | *** join/#asterisk christo (~chris@office.enovi.com) |
| 11:40.54 | MikeJ[Laptop] | but you will have to play with it. |
| 11:40.56 | michael1234 | MikeJ[Laptop]: Can you tell me how much performance impact will the core code running cause |
| 11:41.17 | MikeJ[Laptop] | it may or may not be cheaper to get a pri from telco too |
| 11:41.42 | MikeJ[Laptop] | running in valgrind should not have a huge impact.. how many users on on that box? |
| 11:41.48 | michael1234 | 100 |
| 11:41.55 | MikeJ[Laptop] | specs? |
| 11:42.00 | michael1234 | about 5 simultaneous channels maybe |
| 11:42.05 | michael1234 | dual xeon |
| 11:42.09 | MikeJ[Laptop] | oh.. don't wory about it... |
| 11:42.16 | MikeJ[Laptop] | not even close to an issue.. |
| 11:42.16 | michael1234 | ok cool |
| 11:42.43 | christo | Guys, I am sending faxes over E1 (ie with 30 channels available). If I dump 50 call files into the outgoing spool, asterisk attempts to send them all, but anything beyond the first 30 fail to go through, because there aren't any channels available. Asterisk then just deletes the call file, rather than waiting and retrying. |
| 11:42.53 | christo | is there some way of queueing these calls instead for when a channel is free? |
| 11:43.18 | syle | yeah |
| 11:43.26 | syle | set retries higher |
| 11:43.57 | MikeJ[Laptop] | pbxbart, ok.. I actually need to run to work.. if there is no one else here who ca help you with that, can you post a bug to bugs.digium.com... |
| 11:44.04 | christo | syle - thankyou... can I just set retries to a rogue high value like 100? |
| 11:44.12 | syle | sure |
| 11:44.16 | pbxbart | ok |
| 11:44.24 | christo | sule.. great. thanks a lot :) |
| 11:44.25 | pbxbart | i have a nother core file her |
| 11:44.29 | MikeJ[Laptop] | please read the bug guidelines.. we need that bt /bt full plus configs and stuff to see what it is trying to do |
| 11:44.38 | MikeJ[Laptop] | sorry... |
| 11:44.40 | pbxbart | shoud i refer the the pastbin urls? |
| 11:44.54 | MikeJ[Laptop] | I would attach in a file, the pastebins expire |
| 11:46.15 | syle | mikej |
| 11:46.28 | *** join/#asterisk Tili (~Tili@202-133-67-119-dialup.sat.net.pk) |
| 11:46.37 | syle | question for you, why does everything exit non-zero in verbose mode it seems |
| 11:47.01 | ceegee | I have problems making sip to isdn calls. isdn phone rings but when taking up the earpiece of isdn phone the sip phone still rings a few seconds. then a connection establishes but I can speak only in direction sip -> isdn. this was shown up in /var/log/messages: http://pastebin.com/313179 |
| 11:47.12 | syle | == Spawn extension (default, 701, 1) exited non-zero on 'Zap/2-1' |
| 11:47.27 | pbxbart | ok, i'll do so |
| 11:47.31 | ceegee | distribution is suse linux 9.3 with AVM FritzCard |
| 11:47.33 | syle | get that after i hangup a call on any extension |
| 11:49.00 | oratorloki | need help on how to get AgentMonitorOutgoing(c) to work |
| 11:49.25 | syle | i can;t say i have any real problems, i would just like to see real if else statements make it into extensions.conf one day |
| 11:49.45 | *** join/#asterisk limbique (~limbique@nl-ifw-oss.orcagroup.com) |
| 11:49.49 | limbique | hi |
| 11:50.35 | limbique | does anyone knows to do a pickup from an other extension on asterisk? |
| 11:51.11 | syle | is that english? |
| 11:52.13 | limbique | sort of :P |
| 11:52.30 | limbique | insert 'how' |
| 11:53.40 | hellop | limbique, you mean forward a call to another extension? |
| 11:53.59 | limbique | no, A calls B an C does a pickup. |
| 11:55.02 | kaldemar | define B to a call group and C to the same pickup group. use *8 to pickup the call. |
| 11:55.38 | oratorloki | does anyone here tried using AgentMonitorOutgoing(c)? |
| 11:55.43 | oratorloki | c - change the source channel in the CDR record for this call to agent/agent_id so that we know which agent generates the call |
| 11:55.52 | tzafrir | syle, see what dialplan command has returned the non-zero status. And then see why it was so |
| 11:56.17 | kaldemar | parameters in config files are callgroup=X and pickupgroup=X. |
| 11:57.23 | syle | tzafrir : it always happens after a hangup on zap channel |
| 12:00.13 | limbique | kaldemar, thx... |
| 12:00.38 | limbique | gotta go |
| 12:00.39 | limbique | cya |
| 12:02.44 | syle | anyways it happens all the time |
| 12:02.54 | pbxbart | i've just created my first bug |
| 12:02.57 | syle | even on the simplest of crap like |
| 12:02.59 | *** join/#asterisk tld (~tld@195.84-48-78.nextgentel.com) |
| 12:03.00 | pbxbart | does this look good? http://bugs.digium.com/view.php?id=4708 |
| 12:03.01 | syle | exten => 801,1,Playback(custom/homemessage) |
| 12:03.01 | syle | exten => 801,2,Hangup |
| 12:04.39 | tzafrir | pbxbart, the description is a bit too short |
| 12:04.49 | syle | anyways if your bored maybe you can look at that hangup function :) |
| 12:04.52 | tzafrir | pbxbart, what does it take to reproduce the problem? |
| 12:05.28 | tzafrir | pbxbart, what about relevant local settings? |
| 12:05.51 | *** join/#asterisk bjohnson (~bjohnson@jecinc.tor.istop.com) |
| 12:06.46 | *** join/#asterisk shido (~shido@d221-68-209.commercial.cgocable.net) |
| 12:07.22 | *** part/#asterisk oratorloki (~krtorio@203.131.137.76) |
| 12:07.57 | tzafrir | did it happen once? occsionally? always? |
| 12:08.33 | tzafrir | any special characters somewhere in the database that trigger it? |
| 12:12.39 | syle | tzafrir |
| 12:12.46 | syle | is it safe to run asterisk as root |
| 12:13.11 | pbxbart | i'll add more infos |
| 12:13.17 | tzafrir | It shouldn't immidietly eat your hard drive. But you should avoid it |
| 12:13.42 | tzafrir | At least IMHO |
| 12:14.28 | syle | so whats needed, chown -R user allasteriskdirectories.....start asterisk as that user |
| 12:14.31 | tzafrir | There's no good reason to let asterisk run as root. And there are a number of ways in which it can misbehave |
| 12:14.32 | syle | am i missing anything? |
| 12:15.12 | tzafrir | syle, /var/run/asterisk /var/log/asterisk /etc/asterisk /var/spool/asterisk |
| 12:15.20 | tzafrir | maybe also /var/lib/asterisk |
| 12:15.32 | tzafrir | And it is chown -R asterisk.asterisk |
| 12:17.32 | syle | --/var/lib/asterisk/modules? |
| 12:18.56 | shido | ZzzzZ |
| 12:19.10 | tzafrir | syle, why would asterisk need to write to its modules directory? |
| 12:19.11 | RoyK | z |
| 12:19.28 | *** join/#asterisk perlmonky (~perlmonky@12.109.119.54) |
| 12:19.36 | tzafrir | shido, porting asterisk to s390? |
| 12:19.37 | syle | doesn;t need to write, needs to be able to read |
| 12:19.42 | RoyK | tzafrir: for buffer overflow attacks to be a lot more efficient |
| 12:19.58 | syle | just like covering my basis |
| 12:20.22 | tzafrir | syle, the default ownership is "owned by root, readable to all" |
| 12:21.52 | syle | there is no /var/run/asterisk so not sure where its creating its pid files |
| 12:22.56 | syle | i would include /var/lib/asterisk though |
| 12:22.58 | shido | erf? |
| 12:23.06 | syle | i tend to record gsm files in the sounds dir |
| 12:23.11 | shido | Im .........Im.......... Im gonna play some area 51 |
| 12:23.13 | shido | rebooting |
| 12:25.47 | Katty | mew |
| 12:25.57 | *** join/#asterisk shido6 (~greg@d221-68-209.commercial.cgocable.net) |
| 12:26.01 | *** part/#asterisk djwallis81 (~djwallis8@142.afsat.com) |
| 12:28.00 | *** join/#asterisk CosmoCid (~cosmocid@85.96.192.140) |
| 12:28.12 | syle | --/var/run/asterisk.pid |
| 12:28.13 | syle | found it |
| 12:30.04 | syle | -bash-3.00$ /usr/sbin/asterisk -vvvvvvvvvvvvvvvvvvvvvvvvvvvvvp |
| 12:30.04 | syle | Unable to set high priority |
| 12:30.04 | syle | -bash-3.00$ |
| 12:30.08 | Cresl1n | hey all! :-) |
| 12:30.12 | syle | ok i guess more work is needed |
| 12:30.14 | syle | what the hell is that |
| 12:30.24 | RoyK | syle: no need to use more than 3 v's |
| 12:30.44 | RoyK | syle: heh. i'm quite sure -p requires root |
| 12:31.15 | RoyK | syle: instead of -p, use nice -n -19 asterisk -gvvvvc |
| 12:31.36 | RoyK | -p makes the box hang if some loop is started |
| 12:31.40 | RoyK | which is bad |
| 12:32.46 | *** join/#asterisk kram (~mark@kram.digium.sponsor.pdpc) |
| 12:32.46 | *** mode/#asterisk [+o kram] by ChanServ |
| 12:33.00 | Katty | RoyK: get your paws off me, you uncooth non feline! |
| 12:33.02 | syle | nice: cannot set priority: Permission denied |
| 12:33.04 | syle | lol |
| 12:33.05 | Katty | :P |
| 12:33.20 | RoyK | hm |
| 12:33.49 | RoyK | syle: perhaps use asterisk -u someuser instead? |
| 12:34.28 | syle | oww now thats useful |
| 12:34.44 | syle | su - asterisk -c "asterisk" was my other option |
| 12:36.10 | *** join/#asterisk MikeJ[Laptop] (~ircatjerr@mi.origenfinancial.com) |
| 12:36.10 | *** join/#asterisk benthos (~n_o_b_o_d@69.90.85.25) |
| 12:36.23 | Koshatul | one little question on that poe issue, is it 12v or 48v ? i've read 3 different sites that claim different voltages, and i'm about to start looking for something authoritave, but i thought i'd ask ? |
| 12:36.24 | syle | now bitching about not having write permissions on the zap devices lol |
| 12:36.28 | RoyK | syle: asterisk -h perhaps |
| 12:36.35 | RoyK | syle: just chmod them |
| 12:36.50 | syle | chown -R asterisk.asterisk /dev/zap |
| 12:36.54 | syle | have to add that one to hehe |
| 12:37.37 | RoyK | perhaps chrooting asterisk could be nice |
| 12:37.40 | *** join/#asterisk pifiu (~myassisbi@208.205.181.170) |
| 12:39.47 | tzafrir | The problem is that either with -p or with -U, asterisk's restart is too stipid and gets a "permissions denined" |
| 12:40.07 | tzafrir | I thus always use the init.d script |
| 12:40.46 | RoyK | huh? |
| 12:40.48 | RoyK | kidding? :) |
| 12:41.05 | tzafrir | I meant: with -U: with or without -p (the error messages are simply different) |
| 12:41.34 | tzafrir | RoyK, on my version, at least. And I was simply too lazy to patch it, as I use the init.d script |
| 12:41.36 | Madkiss | Does somebody know what I need to do in order to download firmware files from Cisco? |
| 12:41.51 | syle | i tend to keep asterisk in a screen session all the time |
| 12:41.54 | Madkiss | I got a brand new 7960 with license and all that stuff, but I don't know where to get the software |
| 12:42.18 | kajtzu | Madkiss: you need to have a PICA or similar authorization code to download sw from cco |
| 12:42.34 | Madkiss | Where do I find that thing? |
| 12:42.56 | kajtzu | uh you need to create a cco account |
| 12:43.08 | kajtzu | somewhere in the Process(tm) it'll ask you for a authorization code, pica id, etc. |
| 12:43.41 | kajtzu | there's like 3-4 different codes you can input and they all are pretty much interchangeable. so it depends on what you received from your cisco account or reseller |
| 12:43.41 | Madkiss | how do I do that? |
| 12:43.50 | kajtzu | go www.cisco.com and create a id |
| 12:43.55 | Madkiss | BTDT |
| 12:45.30 | Madkiss | kajtzu: Id did not ask me for PITA, id ... |
| 12:46.09 | kajtzu | see section "register for additional access" |
| 12:46.13 | pifiu | Does anyone know where in the Polycom config files do I tell the phonw where to get the config files (we are setting up phones that have old software and only support TFTP, we want to tell them to get their configs from HTTP after they update)? |
| 12:46.29 | Madkiss | ah |
| 12:46.30 | Madkiss | h |
| 12:47.26 | Madkiss | Now where do I get the "Registration number" and the verification key? Is it written somewhere on the phone? |
| 12:47.34 | kajtzu | no |
| 12:47.43 | kajtzu | it's supplied to you by your cisco reseller |
| 12:47.57 | Madkiss | Ingram? |
| 12:48.05 | kajtzu | or whatever instance (assuming you didn't ebay it) you purchased it from |
| 12:49.12 | Madkiss | Well, what should I say? I see the delivery paper => "IP PHONE w& 1 STATION USER LICENSE2, but no registration number, and no verification key. nowhere. |
| 12:50.16 | kajtzu | right |
| 12:50.38 | *** join/#asterisk lehel (~lehel@82.79.20.17) |
| 12:50.44 | lehel | hello |
| 12:50.54 | kajtzu | you're missing smartnet or pica |
| 12:50.59 | lehel | somebody tried the Asterisk SMS Gateway? |
| 12:51.58 | benthos | Anyone know if there is another way to capture the "ALERT_INFO" header on an incoming call besides the sipgetheader() patch ? |
| 12:52.38 | kajtzu | Madkiss: just buying a license doesnt entitle you to upgrades |
| 12:52.39 | kajtzu | or sw |
| 12:53.57 | syle | extensions.ael |
| 12:53.59 | syle | is it needed |
| 12:54.09 | syle | get warnings if its not there |
| 12:55.36 | Madkiss | kajtzu: well, so ... I got a phone, a license ... but no software? |
| 12:56.46 | *** join/#asterisk MikeJ[Laptop] (~ircatjerr@mi.origenfinancial.com) |
| 12:57.39 | kajtzu | it is assumed the software comes with ccm or csps ;) |
| 12:57.54 | kajtzu | get smartnet or pica if you need it separately ;) |
| 13:00.08 | *** join/#asterisk michael1234 (~mick@202.22.163.104) |
| 13:00.17 | michael1234 | what do you guys use for log rotation |
| 13:00.53 | Ahrimanes | notepad |
| 13:01.25 | *** join/#asterisk MrbBelvedr (~tt@ip68-227-218-250.dc.dc.cox.net) |
| 13:02.21 | seeeS | logrotate |
| 13:02.43 | *** part/#asterisk pifiu (~myassisbi@208.205.181.170) |
| 13:05.55 | *** join/#asterisk anthm (~anthmct@CPE-69-76-83-52.wi.res.rr.com) |
| 13:05.55 | *** mode/#asterisk [+o anthm] by ChanServ |
| 13:06.14 | lehel | anyone heard about asterisk sms gateway? |
| 13:08.13 | *** join/#asterisk afv-13 (~NetCB@tbnb-165-221-173.telkomadsl.co.za) |
| 13:08.55 | Madkiss | kajtzu: Wait ... I _buy_ a phone _with_ a license and yet get no software because to get it, I need to get a "ccm" or a "csps", whatever that is? (can one buy consonants, too?) |
| 13:09.31 | afv-13 | i'll take a vowel please |
| 13:10.15 | Nugget | eep |
| 13:10.35 | Nugget | Madkiss: yeah, cisco are crackheads. You need both a license and a support contract to gain access to the software. |
| 13:10.47 | Madkiss | So my phone is worthless?! |
| 13:10.52 | kajtzu | pretty much ;-) |
| 13:10.54 | Madkiss | wtf |
| 13:10.56 | kajtzu | ccm is cisco call manager |
| 13:10.58 | Nugget | The good news is that the support contract only costs about $8 bucks, but it's a bear finding a vendor who will sell you just one |
| 13:11.00 | kajtzu | csps is cisco sip proxy server |
| 13:11.03 | RoyK | Nugget: not crackheads. they only knows how to make money |
| 13:11.07 | Hmmhesays | what kind of phone? |
| 13:11.13 | Katty | Hmmhesays: a banana phone |
| 13:11.17 | afv-13 | could someone please show me an example of an exten => t....... |
| 13:11.19 | Hmmhesays | beer phone? |
| 13:11.22 | Madkiss | Hmmhesays: Cisco 7960 |
| 13:11.24 | Katty | no, banana phone |
| 13:11.27 | *** join/#asterisk darwin35 (~darwin35@ip70-186-117-198.ma.dl.cox.net) |
| 13:11.29 | Nugget | ring ring ring ring ring ring ring |
| 13:11.30 | kajtzu | Madkiss: well the theory goes that you're really the problem here as you don't have a cisco or reseller contract like very other cisco customer would have :) |
| 13:11.32 | Nugget | banana phone |
| 13:11.36 | mutilator | banana pgone |
| 13:11.36 | Hmmhesays | MadKiss: put sip on it |
| 13:11.37 | Katty | doo do do do do do |
| 13:11.37 | afv-13 | hahahaha |
| 13:11.42 | Hmmhesays | and be happy |
| 13:11.47 | kajtzu | very -> every |
| 13:11.48 | Madkiss | Hmmhesays: That's what I am goddamn trying to do |
| 13:11.55 | Hmmhesays | well what's the problem? |
| 13:12.02 | Madkiss | I have no working software for it |
| 13:12.06 | darwin35 | its time for bananas in pajamas |
| 13:12.08 | Hmmhesays | heh, get some |
| 13:12.13 | kajtzu | Madkiss: see the phone's got a base price of X. then depending on if you're buying a CCM license or a SIP/MGCP license it costs extra |
| 13:12.20 | Hmmhesays | are you a cop? |
| 13:12.23 | Madkiss | Hmmhesays: THat's the problem. |
| 13:12.27 | kajtzu | they force on you the license thing so you can't avoid it |
| 13:12.33 | Madkiss | Hmmhesays: No, I am not affiliated with the police in any way. |
| 13:12.34 | Hmmhesays | a software 5-0? |
| 13:12.49 | Madkiss | kajtzu: I got a goddamn license. |
| 13:13.01 | kajtzu | Madkiss: yup. but the license entitles you to _use_ |
| 13:13.04 | kajtzu | Madkiss: not _download_ |
| 13:13.22 | kajtzu | the service contract (smartnet, pica, reseller provided, etc.) entitles you to _download_ |
| 13:13.41 | darwin35 | chill out drop the fucking attitude this am and speak like your talking to your fucking mother |
| 13:13.48 | Katty | DarthClue: :> |
| 13:13.53 | *** join/#asterisk salvini_fs (~felipesal@200141121118.user.veloxzone.com.br) |
| 13:13.54 | darwin35 | no need to get pissy |
| 13:14.31 | salvini_fs | how to change priority in codecs? |
| 13:14.50 | darwin35 | put the codec you want first on top of the others |
| 13:14.58 | salvini_fs | but it aint working |
| 13:15.02 | darwin35 | and do the same in your phone |
| 13:15.07 | salvini_fs | i did it |
| 13:15.09 | darwin35 | what phone |
| 13:15.14 | salvini_fs | eyebeam |
| 13:15.16 | darwin35 | and what codec |
| 13:15.20 | salvini_fs | softphone actually |
| 13:15.33 | *** join/#asterisk potsboy (~chrisg@209.212.122.90) |
| 13:15.35 | salvini_fs | gsm/ilbc |
| 13:15.36 | RoyK | anyone here ever made eyebeam video work with asterisk? |
| 13:15.48 | Ahrimanes | RoyK: i have it running even with some hardphones |
| 13:15.50 | darwin35 | I have not worked with softphones othert then sflphone |
| 13:16.01 | potsboy | does anybody know were I will be able to get hold panasonic pbx manuals? |
| 13:16.16 | salvini_fs | is sflphone better than eyebeam? |
| 13:16.18 | darwin35 | the panasonic site |
| 13:16.26 | darwin35 | sflphone is for unix |
| 13:16.32 | salvini_fs | ok |
| 13:16.33 | syle | hey how do you fix *67 so it works on your local zap lines at home |
| 13:16.42 | potsboy | panasonic site does have the technical stugg im after |
| 13:16.52 | Nugget | what does *67 do? |
| 13:17.02 | darwin35 | then you have to call the support line and they will point you to it |
| 13:17.20 | darwin35 | nugget what did you map it to in your extensions.conf |
| 13:17.32 | salvini_fs | darwin35, the problem is, i use disallow=all, allow=ilbc and allow=gsm. but softphone always gets gsm. |
| 13:17.32 | Nugget | I'm asking syle/ |
| 13:18.08 | salvini_fs | darwin35, even though I put ilbc as preferred in eyebeam. but when i leave only ilbc as codec, it uses ilbc |
| 13:18.15 | darwin35 | style what do you have *67 mapped to do |
| 13:18.24 | Ahrimanes | RoyK: want info? |
| 13:18.34 | RoyK | what hardfons? |
| 13:18.36 | darwin35 | it may not support ilbc |
| 13:18.47 | Ahrimanes | RoyK: wooksung 2100w |
| 13:18.52 | Madkiss | Now the only thing left to find out is what Cisco-people smoke all day |
| 13:18.57 | salvini_fs | it does support, because when i leave ilbc, eyebeam works fine with asterisk. |
| 13:19.04 | Ahrimanes | RoyK: innomedia mta5410 |
| 13:19.09 | Nugget | I presume that syle is one of those people we sometimes get in here who mistakenly believes that those * codes are universal, the same everywhere, and such a fundamental part of analog phones that the zap channels should also be mimicing what they do on a phone line from his local provider. |
| 13:19.16 | Ahrimanes | RoyK: dont remember if any more of them work with eyebeam |
| 13:19.25 | salvini_fs | but if i add gsm after ilbc, it prefeers gsm. always. even though ilbc is before in asterisk too |
| 13:19.35 | Nugget | but he might just be asking how to modify his extension to allow him to keep using it, whatever it does. |
| 13:19.40 | *** join/#asterisk Lee__ (~lee@ool-44c26fa3.dyn.optonline.net) |
| 13:19.43 | darwin35 | not sure then like I said I dont use windows softclients |
| 13:19.47 | darwin35 | sorry |
| 13:19.52 | salvini_fs | ok. tks anyway |
| 13:21.18 | hellop | anyone know of a good reverse number lookup? |
| 13:21.24 | darwin35 | I dont think they should be mapping any hard coded *exten it should all be in exten.conf |
| 13:21.45 | hellop | phone number to address |
| 13:22.07 | darwin35 | enum dundi |
| 13:22.32 | darwin35 | like ip or hard |
| 13:23.00 | hellop | darwin35, me? |
| 13:23.07 | darwin35 | yes you |
| 13:23.10 | hellop | non ip |
| 13:23.20 | Hmmhesays | anyone got any experience working with serial ports in perl? |
| 13:23.20 | darwin35 | no they next to you wearing your pants |
| 13:23.25 | Katty | Hmmhesays: you |
| 13:23.34 | Hmmhesays | me? |
| 13:23.38 | Katty | Hmmhesays: yes. |
| 13:23.45 | Hmmhesays | what'd I do now? |
| 13:23.49 | Katty | Hmmhesays: twice as much as half |
| 13:23.52 | hellop | darwin35, that explains why I have no pants! |
| 13:23.54 | Katty | oh |
| 13:23.57 | Katty | i read that wrong, nevermind |
| 13:23.59 | darwin35 | non that are public . |
| 13:24.06 | Hmmhesays | <chuckle> what did you read? |
| 13:24.06 | darwin35 | and are costly |
| 13:24.12 | Katty | Hmmhesays: how much do i know |
| 13:24.58 | Hmmhesays | haha, you lost me completely |
| 13:25.47 | darwin35 | now dance like a pritty little school girl dance I said |
| 13:25.53 | hellop | heh |
| 13:26.04 | DarthClue | http://www.darthclue.org/archives/5-Shameless-Plug.html |
| 13:26.23 | gordonjcp | got to be careful, dancing when you're wearing a kilt |
| 13:26.30 | darwin35 | I have 5 utility kilts and 3 family Tartens |
| 13:26.41 | gordonjcp | cool |
| 13:26.48 | Katty | Hmmhesays: yeah well that's normal :P |
| 13:27.01 | Katty | oh, i could bring a /skirt/ to cluecon! |
| 13:27.05 | Katty | and heels! |
| 13:27.08 | Katty | oh god, what am i thinking |
| 13:27.10 | darwin35 | Hellop www.utiilkilts.com |
| 13:27.11 | Katty | forget that |
| 13:27.26 | Katty | DarthClue: should i wear a skirt one day? |
| 13:27.52 | *** join/#asterisk MrBelvedr (~tt@ip68-227-218-250.dc.dc.cox.net) |
| 13:28.09 | Katty | darwin35: i shall NOT relate myself to anything catholic |
| 13:28.16 | darwin35 | hehehh |
| 13:28.26 | *** join/#asterisk kswail (~kyndar@modemcable244.73-81-70.mc.videotron.ca) |
| 13:28.29 | Wonka | woah. someone hand me a bucket. |
| 13:28.33 | Hmmhesays | heh, that might be a bad idea if you are worried about stuff |
| 13:28.38 | Wonka | BUILDVER=$(shell if uname -r | grep -q ^2.6; then echo "linux26"; else echo "linux24"; fi) |
| 13:28.46 | Katty | Hmmhesays: it's not a short skirt (= |
| 13:28.51 | Wonka | from zaptel's makefile |
| 13:29.01 | Hmmhesays | a long skirt in the summer time? |
| 13:29.11 | Katty | well it's an angle cut, see |
| 13:29.17 | darwin35 | no only knee height |
| 13:29.19 | hellop | Once you experiece the unrestricted freedom of wearing a skirt, you never again mock those who choose to dance around like schoolgirls. |
| 13:29.20 | Wonka | WHY doesn't anyone think of those who want to build modules for a kernel other than the running one? |
| 13:29.27 | darwin35 | with long white stockings |
| 13:29.30 | Katty | so the right side is thigh height and the left side is ankle height |
| 13:29.41 | Wonka | Katty: send pix |
| 13:29.42 | tzafrir | Wonka, that's the point of it, I believe |
| 13:29.47 | Katty | Wonka: have none |
| 13:29.52 | Wonka | tzafrir: shoot some :) |
| 13:30.04 | tzafrir | Wonka, there should be an option to override the automatic detection |
| 13:30.08 | tzafrir | If not, it is a bug |
| 13:30.12 | Wonka | tzafrir: ack |
| 13:30.30 | Wonka | tzafrir: i usually try to build all modules before booting the new kernel... |
| 13:30.31 | tzafrir | Wonka, I build regularly on 2.6 for various 2.6 and 2.4 kernel configs |
| 13:30.35 | darwin35 | wich kilt shall I wear today the tan beig grey tan camo or the military green |
| 13:30.46 | Katty | DarthClue: :< |
| 13:30.54 | Katty | darwin35: tan! |
| 13:30.59 | tzafrir | Wonka, stable or HEAD? |
| 13:30.59 | Wonka | `uname -r` outside of some ?= construct _is_ _evil_ |
| 13:31.01 | darwin35 | tan with work boots |
| 13:31.20 | Wonka | tzafrir: i just need the ztdummy module, asterisk debian packages |
| 13:31.21 | Katty | (= |
| 13:31.36 | darwin35 | an yes regimental |
| 13:31.45 | tzafrir | http://tzafrir.org.il/rapid108/unstable/ |
| 13:32.14 | tzafrir | Wonka, you'll get there pre-built zaptel for sarge kernels |
| 13:33.02 | tzafrir | You'll also get there , in the diff of the zaptel package, the dpatch Makefile.dpatch that removes most of this ugliness from that makefile |
| 13:33.30 | Katty | DarthClue: :> |
| 13:33.40 | Wonka | tzafrir: i don't like debian kernels and bake my own |
| 13:33.47 | tzafrir | Wonka, and this is not the only eveil makefile in asterisk |
| 13:34.03 | tzafrir | Wonka, install zaptel-source from there |
| 13:34.05 | Wonka | tzafrir: if i had a debian kernel, i'd have used zaptel-sources or how it's named |
| 13:34.06 | darwin35 | is cvs down |
| 13:34.19 | tzafrir | and then run: m-a zaptel build |
| 13:34.31 | Wonka | i don't like this debian module helper thingie... |
| 13:34.33 | tzafrir | and behold the magic (hopefully) |
| 13:34.44 | Wonka | wants to use the debian damaged kernel sources from months ago |
| 13:34.50 | nitram | but u need to remove the "#" from the makefile first. otherwise ztdummy will not be build |
| 13:34.51 | tzafrir | oh, if you don't like it: |
| 13:35.18 | nitram | Wonka: and you can use that with a plain vanilla kernel |
| 13:35.41 | Wonka | nitram: hm. too late now, i've rebooted the machine... |
| 13:35.52 | Wonka | was necessary anyway - 2.4.21 ran there |
| 13:36.00 | tzafrir | run (as a user): m-a -u . -i -t -f zaptel build |
| 13:36.22 | tzafrir | Wonka, the above line should give it a saner behaviour |
| 13:36.48 | tzafrir | 2.4.21? is that woody you have over there? |
| 13:38.01 | Wonka | it is updated to sarge now, but it was a custom built kernel |
| 13:38.11 | Wonka | and nobody bothered to update it |
| 13:38.20 | Wonka | now it's got a fine 2.6.12.2 |
| 13:38.51 | *** join/#asterisk _-Jon-_ (jon@CPE00112f6dfbee-CM00003989406c.cpe.net.cable.rogers.com) |
| 13:38.55 | _-Jon-_ | Morning everyone |
| 13:39.21 | *** join/#asterisk komnieve (~ksingh@dsl081-037-205.lax1.dsl.speakeasy.net) |
| 13:39.39 | Hmmhesays | hmm I need a good motherboard for a small install |
| 13:39.41 | _-Jon-_ | Does anyone know if I have an alternate number with broadvice if I can set up a dialplan to ring different phones depending on which number is called? |
| 13:39.59 | Hmmhesays | for incoming calls? |
| 13:40.03 | _-Jon-_ | Yes |
| 13:40.10 | Hmmhesays | that's not broadvoice dependent |
| 13:40.31 | _-Jon-_ | Oh okay so Asterisk will know which number the person dialed? |
| 13:41.01 | Hmmhesays | you should get the dialed number of the incoming call yes |
| 13:41.17 | _-Jon-_ | Okay, thanks |
| 13:41.41 | Hmmhesays | you could verify that pretty easily |
| 13:41.49 | _-Jon-_ | sip debug? |
| 13:41.53 | Katty | hmm. |
| 13:41.56 | Hmmhesays | set verbose 5 |
| 13:42.08 | Katty | somewhere, over the rainbow, there is a file on linux that will let me dump stuff into it so that i can do stuff on start up |
| 13:42.22 | _-Jon-_ | Alright, thanks hmmhesays |
| 13:42.23 | Katty | like mount network shares |
| 13:42.36 | tzafrir | <PROTECTED> |
| 13:42.51 | Katty | someone knows what that file is, and where it is |
| 13:42.53 | Hmmhesays | etc/rc* |
| 13:43.08 | Hmmhesays | with symlinks to etc/init.d |
| 13:43.10 | tzafrir | Katty, the init scripts are quite distro-dependent. Unless you refer to /etc/inittab itself |
| 13:43.32 | Katty | tzafrir: i'm running mandrake and debian. |
| 13:43.33 | tzafrir | But you normally woldn't run things from there, unless you really know what you're doing |
| 13:43.43 | Katty | tzafrir: i'd prefer to start vncserver when debian starts, but i don't know how |
| 13:43.46 | Hmmhesays | you just got the answer for debian |
| 13:43.57 | Katty | Hmmhesays: i don't know what a symlink is |
| 13:44.10 | Hmmhesays | it's s symbolic link |
| 13:44.14 | tzafrir | mandrake: chkconfig . Debian: update-rc.d |
| 13:44.16 | Katty | which also goes over my head |
| 13:44.21 | Hmmhesays | ahhh |
| 13:44.22 | Katty | tzafrir: k (= |
| 13:44.38 | Katty | tzafrir: and where is chkconfig and update-rc.d? |
| 13:44.41 | *** join/#asterisk znoG (~gs@200.115.216.109) |
| 13:44.46 | Hmmhesays | in debian, you put your script in /etc/init.d and link it to whichever run level you want it to start in |
| 13:44.53 | Katty | Hmmhesays: ooh. |
| 13:44.56 | Madkiss | hum |
| 13:44.58 | Madkiss | Jul 14 15:44:41 WARNING[9677]: chan_sip.c:695 retrans_pkt: Maximum retries exceeded on call 0013c4df-14fa0004-75b42cb2-2ed85287@192.168.0.29 for seqno 101 (Non-critical Response) |
| 13:44.58 | Katty | Hmmhesays: that makes sense :> |
| 13:45.01 | Madkiss | What the hell? |
| 13:45.04 | tzafrir | but then again, for debian chances are that the links are in place, and if the service is not running, it is due to /etc/default/servicename |
| 13:45.15 | Hmmhesays | etc/rc3.d for run level 3 ... as an example |
| 13:46.11 | *** join/#asterisk coppice (~chatzilla@228.143.17.210.dyn.pacific.net.hk) |
| 13:46.44 | Hmmhesays | in debian if something doesn't run, check for a typo in your symlink <chuckle> |
| 13:46.51 | Hmmhesays | 99% of the time it's me fat fingering it |
| 13:47.22 | Madkiss | How do I display a list of all clients currently logged into asterisk? |
| 13:49.09 | *** part/#asterisk ozJames79 (~jamesblan@CPE-2032087143.bal.ncable.net.au) |
| 13:50.16 | newl | Madkiss: 'help sip', look for the 'show xyz' options. |
| 13:50.25 | Ahrimanes | Madkiss: look at output from sip show peers and iax2 show peers |
| 13:50.34 | Katty | actually, which run level is it where it doesn't go into the gui? |
| 13:50.41 | Katty | or where do i find my current run level? |
| 13:50.58 | newl | /sbin/runlevel |
| 13:51.00 | Katty | ASTERISK:~# runlevel |
| 13:51.01 | Katty | N 2 |
| 13:51.03 | Katty | ^- that? |
| 13:51.08 | Madkiss | 2000/2000 192.168.0.29 D 255.255.255.255 5061 Unmonitored -- looks good. |
| 13:51.15 | Madkiss | Why the hell does my phone not call out, then? |
| 13:51.22 | *** part/#asterisk ceegee (~christian@p508A6901.dip.t-dialin.net) |
| 13:51.23 | Madkiss | "Maximum retries exceeded on call" |
| 13:51.32 | tzafrir | previous runlevel cur-runlevel |
| 13:52.20 | Madkiss | SIP/2.0 407 Proxy Authentication Required |
| 13:52.24 | Madkiss | aharm |
| 13:52.37 | Katty | hmm |
| 13:52.49 | Katty | there's about 20 things in here |
| 13:53.41 | darwin35 | festival |
| 13:53.43 | tzafrir | Katty, with debian there is no separate runlevel for "no gui" |
| 13:53.45 | Hmmhesays | anything below runlevel 5 |
| 13:53.45 | darwin35 | festival |
| 13:54.06 | Katty | tzafrir: k |
| 13:54.06 | Hmmhesays | and kill the graphical startup |
| 13:54.17 | tzafrir | the xdms run as services |
| 13:54.30 | Hmmhesays | usually I just remove it from etc/init.d |
| 13:54.59 | *** join/#asterisk Holos (~asdf@72.1.197.10) |
| 13:55.12 | Katty | what's xdms? |
| 13:55.20 | Katty | is that like startx? |
| 13:55.25 | Hmmhesays | the pretty login gui |
| 13:55.37 | Katty | xdms isn't startx? |
| 13:55.42 | Katty | or startx starts xdms? |
| 13:56.05 | Hmmhesays | no, xdms is the x display manager |
| 13:56.19 | Hmmhesays | x is x windows itself |
| 13:56.38 | Katty | way to loose me completely :< |
| 13:56.41 | Nugget | Just scrap it all and buy a mac. |
| 13:56.42 | Hmmhesays | startx fires up x, then starts xdms |
| 13:57.00 | Katty | and xdms manages what, exactly |
| 13:57.12 | Katty | don't say display, that confuses me |
| 13:57.14 | Katty | it manages the gui? |
| 13:57.18 | Hmmhesays | bingo bango |
| 13:57.24 | Katty | mango? |
| 13:57.30 | Hmmhesays | wango? |
| 13:57.32 | mutilator | zango |
| 13:57.35 | Katty | i thought kde was my gui |
| 13:57.41 | Katty | so.....xdms manages kde? |
| 13:58.01 | Hmmhesays | more or less it manages which gui you use |
| 13:58.18 | Hmmhesays | gnome, kde, icewm etc |
| 13:58.22 | Nugget | I've never heard of xdms, but there's an xdm (with the usual clones like kdm) which serves as an alternative to typing "startx". |
| 13:58.54 | Hmmhesays | x display manager (service) |
| 13:58.59 | Nugget | xdm is fundamnentally a graphical login(5) that lets you configure a unix box to boot straight into the gui |
| 13:59.19 | Nugget | although underneath is does a crapload of stuff you'll probably never care about in addition to that |
| 13:59.52 | Hmmhesays | which is why I always disable it |
| 14:00.20 | Nugget | why would extra capabilities be a reason to avoid it? |
| 14:00.42 | mutilator | gremlins |
| 14:01.18 | Hmmhesays | no real reason I suppose, other than I don't like it starting on every reboot |
| 14:01.45 | *** join/#asterisk `Sauron (sauron@h-69-3-12-50.hstqtx02.covad.net) |
| 14:01.51 | Nugget | arguably it's a little bit safer than using the "startx" approach because it avoids leaving an open user shell sitting behind the x server. |
| 14:02.22 | jontow | ( startx & ) ; lock -pn |
| 14:02.26 | jontow | thats my line ;) |
| 14:02.31 | Nugget | good call :) |
| 14:03.05 | jontow | i've yet to find a decent pty locking program for linux though |
| 14:03.06 | Holos | Can anyone shed some light on a problem I'm having: I moved my Polycom phone from eth0 to eth0:0 and I am able to receive calls and make calls but there is no audio. I can call from my Xlite client that registers to the eth0:0 address. The Polycom sends audio but doesn't receive. |
| 14:03.20 | jontow | i foudn 'vlock' but it.. bothers me ;) i was thinking about just porting the source to the one included in the freebsd/netbsd base systems |
| 14:03.30 | jontow | i have many a script relying on it |
| 14:08.00 | *** join/#asterisk stkn (~stkn@stkn-active-pdpc.developer.gentoo) |
| 14:08.35 | darwin35 | mine autolock after 5 min of no use |
| 14:09.26 | darwin35 | and after 15 min of no use it logs the userout and resets the terminal |
| 14:12.07 | Katty | hmm |
| 14:12.23 | Katty | so if i do S88startvncserver -> ../init.d/vncserver |
| 14:12.31 | Katty | and in the vncserver script file thing i just type vncserver |
| 14:12.35 | Katty | would that make it all work? :P |
| 14:13.52 | Hmmhesays | close Katty |
| 14:14.21 | *** join/#asterisk [Jedi] (~fdsafasdf@213.162.200.226) |
| 14:14.24 | [Jedi] | Hello |
| 14:14.43 | hellop | any suggestions for sip softphone on a PDA? |
| 14:14.53 | *** join/#asterisk SpaceBass (~sp@c-24-125-184-203.hsd1.va.comcast.net) |
| 14:14.53 | Hmmhesays | sjphone maybe? |
| 14:15.02 | [Jedi] | I'm trying to connect an old Aculab card directly to an E1 interface of a Digium TE405P, so that the aculab uses all the E1 for performing stress-test on the Digium card |
| 14:15.11 | *** join/#asterisk Ariel_ (~Ariel@adsl-068-157-125-248.sip.mia.bellsouth.net) |
| 14:15.11 | [Jedi] | I've set up the aculab as CPE and the digium as NET |
| 14:15.30 | SpaceBass | morning |
| 14:15.40 | Ariel_ | Hello everyone |
| 14:15.46 | hellop | So when a PDA says it has VOIP it's probably no more then a softphone right? Like the Symbol MC50.. |
| 14:15.52 | [Jedi] | but in the aculab I get: "Received Signal Lost", "Lost Synchronisation" and Frame "Slip in Receive Buffer" |
| 14:15.53 | lehel | hi Ariel_.. how's goin? |
| 14:16.03 | Ariel_ | lehel, good |
| 14:16.06 | [Jedi] | what could be the problem? |
| 14:16.07 | *** join/#asterisk Katty (~angela@68.112.15.110) |
| 14:16.10 | *** join/#asterisk danalien (~danalien@danalien.user) |
| 14:16.11 | [Jedi] | bad cable? |
| 14:16.22 | [Jedi] | or these errors are higher-level? |
| 14:16.30 | Hmmhesays | how'd that work out Katty |
| 14:16.38 | Katty | eh? |
| 14:16.43 | Katty | i missed what you typed. |
| 14:16.46 | Hmmhesays | your vncserver deal |
| 14:16.50 | Katty | oh |
| 14:16.59 | Katty | i didn't add it runlevel 2 yet |
| 14:18.41 | Hmmhesays | Ariel_ have you used *@home 1.1 in production anywhere? |
| 14:18.56 | Ariel_ | Hmmhesays, yes |
| 14:19.17 | Hmmhesays | I got a 5 phone system going up next week, and I'm thinking of using it |
| 14:20.24 | SpaceBass | *cough* does my house count as production? |
| 14:20.40 | Holos | I solved my audio only problem by moving the ip the phones registered to from eth0:0 to eth1. Has anyone had any issues binding to second IP's? |
| 14:20.41 | Hmmhesays | how much uptime? |
| 14:21.39 | toot | what kernel are people using with with TDM400P cards? |
| 14:22.00 | komnieve | Hi everyone |
| 14:22.08 | Hmmhesays | price senstive installs kind of suck, hard to find a system with an intel board in it for a reasonable price |
| 14:22.12 | Ariel_ | Hmmhesays, I actually have 3 systems up and running with ahh. |
| 14:22.23 | Ariel_ | ahh/a@h |
| 14:22.33 | Hmmhesays | what kind of hardware are you running? |
| 14:22.41 | komnieve | has anyone had a problem with amp/ahh not writing the extended conf files from the mysql db? |
| 14:22.43 | Ariel_ | Hmmhesays, what kinda board are you going to use for pstn? |
| 14:22.54 | Hmmhesays | none, this is a vonage install |
| 14:23.12 | komnieve | lol |
| 14:23.17 | Ariel_ | Hmmhesays, how are you going to get vonage into the asterisk box? |
| 14:23.18 | greg_work | komnieve: #amportal |
| 14:23.26 | mutilator | sledge hammer! |
| 14:23.31 | komnieve | good stuf thanks greg |
| 14:23.37 | Katty | i'm going to invest in a new strat |
| 14:23.40 | Hmmhesays | Ariel_ same way I have my testing boxes setup |
| 14:23.45 | Hmmhesays | ;) gotta know the right voodoo |
| 14:23.52 | mutilator | a sledge hammer! |
| 14:24.20 | greg_work | so, my TDM400P crashed my server again last night .. was hoping it was an irq conflict, but after disabling everything and turning off APIC a few days ago, apparently it wasn't. |
| 14:24.39 | Hmmhesays | anyone, no pstn |
| 14:24.40 | Hmmhesays | all IP |
| 14:24.45 | Hmmhesays | *anyhoo |
| 14:25.15 | Ariel_ | Hmmhesays, the ones I have setup are all with at least one pstn line I don't trust not having one for 911 and it keeps me out of any leagle problems. |
| 14:26.03 | Hmmhesays | yeah that's a good idea |
| 14:26.11 | Hmmhesays | lol, what's up Katty, did I miss something? |
| 14:26.50 | Ariel_ | Katty, hello hope all is well. (sends a small but quick hug). |
| 14:26.53 | Hmmhesays | I gotta find the pc hardware for under a grand |
| 14:26.54 | *** join/#asterisk solar (~solar@smtp.gentoo.org) |
| 14:27.05 | Juggie | that should not be hard |
| 14:27.13 | Hmmhesays | everything on tigerdirect seems to use crap motherboards |
| 14:27.16 | Ariel_ | Hmmhesays, well build the server from newegg using shuttle box. |
| 14:27.17 | Katty | Ariel_: good thanks, how's you? (= |
| 14:27.19 | Juggie | build something |
| 14:27.25 | Katty | Hmmhesays: oh just the voodoo, and then the doll under the server |
| 14:27.36 | Juggie | a 1000$ pc should be easy |
| 14:27.56 | Hmmhesays | yeah, no raid, and off brand everything |
| 14:28.01 | Juggie | you can get computers from dell for like 1/2 that. |
| 14:28.03 | Juggie | cdn |
| 14:28.19 | *** join/#asterisk T-Squared (~ted@hidden.serreyn.com) |
| 14:28.38 | Ariel_ | Hmmhesays, I just setup a video box for zoneminder using a shuttle and dlink cames for under a grand. |
| 14:29.19 | hellop | lo? |
| 14:29.33 | *** join/#asterisk MustDie (voip@205.247.13.252) |
| 14:29.52 | Katty | what do they call the tv stand things with doors on the front? |
| 14:30.05 | T-Squared | ok interesting problem zaptel card with analog line coming in and going out to analog phone. We have caller id and call waiting and get the caller id, but can't seem to flash to pick up the call works fine if I do not go thru asterisk |
| 14:30.20 | Hmmhesays | a tv stand |
| 14:30.23 | Hmmhesays | with doors in the front |
| 14:30.25 | key2 | someone uses a tel with PA168 chipset |
| 14:30.33 | SpaceBass | T-Squared known issue, there is not really a method for * to recognize the "beep" coming from the PSTN line |
| 14:30.33 | Katty | Hmmhesays: it's starts with an a! |
| 14:30.37 | Katty | Hmmhesays: arm, something or other |
| 14:31.10 | T-Squared | also anyone know where to disable the busy channel checking on amp/asterisk so a SIP phone will see multiple calls coming in |
| 14:31.33 | SpaceBass | T-Squared you have to activate call waiting, its disabled by default... *70 I think |
| 14:31.34 | *** join/#asterisk SwK[Work] (~SwK@border0hsv.asterisksgi.com) |
| 14:31.35 | toot | erm - does it matter what kernel i run with my TDM400P? i can't find anywhere specifys what i should be running |
| 14:31.50 | Hmmhesays | armoir? |
| 14:32.13 | Katty | ! |
| 14:32.14 | Katty | that's it! |
| 14:33.07 | SpaceBass | Katty - www.target.com or www.ladiff.com (cheap end to high end) |
| 14:33.26 | [Jedi] | Which would be the best way to do a stress-test against an asterisk using TDM? |
| 14:33.37 | T-Squared | spacebass, for the sip phone or for the analog phone - the analog already has it enabled in the config |
| 14:33.56 | Hmmhesays | a paper clip from positive to ground |
| 14:34.03 | SpaceBass | T-Squared you have to enable call waiting on the sip phone's extension... assuming the phone supports it |
| 14:34.17 | T-Squared | got it, enabled, now to test again |
| 14:34.20 | mishehu | toot: I'd say at least a 2.4.x kernel. |
| 14:34.25 | Hmmhesays | ugh, why are 3ware raid cards so expensive |
| 14:34.31 | SpaceBass | T-Squared one work-around that Im using for PSTN call waiting is to have the PSTN carrier call-forward-on-busy to a voip provider like BV |
| 14:34.33 | mishehu | Hmmhesays: because they' |
| 14:34.35 | Hmmhesays | beside the fact that they rock |
| 14:34.37 | mishehu | Hmmhesays: because they're so good |
| 14:34.38 | Katty | SpaceBass: if i was wanting cheap, i'd just go to a thrift store or goodwill, or just buy a corner tv stand |
| 14:34.45 | *** join/#asterisk malcolmd (~malcolmd@malcolmd.digium.sponsor.pdpc) |
| 14:34.55 | SpaceBass | Katty I didnt want to make assumptions :) |
| 14:35.09 | Katty | SpaceBass: (= |
| 14:35.13 | *** join/#asterisk Cresl1n (~matt@207.111.174.1) |
| 14:35.36 | T-Squared | spacebass can't do it, already costing me too much a month for the analog line, wife just wants it to work like it used to with her analog phone |
| 14:35.59 | syle | what online credit card processing companies you guys using? |
| 14:36.15 | SpaceBass | T-Squared belive me, I've been through this exact issue :) .. BV has a $5/month BYOD plan that has unlimited incoming minutes (and lines) and thats your best bet |
| 14:36.23 | T-Squared | paypal |
| 14:36.46 | SpaceBass | T-Squared another option is to create an extension that uses the flash() app and then transfers the call back to the calling phone |
| 14:37.05 | SpaceBass | T-Squared the problem with that is no really asterisk features are in play (hold, music on hold, conf, etc) |
| 14:37.23 | Holos | Hmmhesays: IBM has some nice 1U servers for $1200CAD right now.. I picked up 2 for a new install w/ cold spare |
| 14:37.37 | *** join/#asterisk nowork (~jfu2808@216.254.141.97) |
| 14:37.44 | Hmmhesays | cool, i'll check that out |
| 14:38.03 | pawalls | Has anyone here screwed around with the sphinx2/asterisk documentation they put up? |
| 14:38.52 | key2 | bkw_: there ?? |
| 14:39.06 | Katty | Hmmhesays: voodoo chile? :> |
| 14:39.25 | Holos | Hmmhesays: Look for 88362MU It's a 3.0G with a 36GB Scsi card. They have SATA as well. |
| 14:39.44 | Holos | Hmmhesays: s/card/drive |
| 14:40.59 | bkw_ | hrm |
| 14:41.10 | T-Squared | can you enable call waiting in sip.conf? |
| 14:41.32 | mountie | Holos: Looks like that is 1900 (CAD): http://www-132.ibm.com/webapp/wcs/stores/servlet/ProductDisplay?productId=8705217&storeId=124&langId=124&catalogId=-124 |
| 14:41.37 | SpaceBass | T-Squared not sure... would imagine there is a way |
| 14:41.40 | MikeJ[Laptop] | KRAM! |
| 14:41.52 | *** join/#asterisk dieck (~dieck@saengerschafter.de) |
| 14:41.56 | kram | hi mr. mike what's up |
| 14:41.59 | *** join/#asterisk icebalm (~icebalm@42.speede.mycybernet.net) |
| 14:42.11 | Holos | mountie: It's on promo for most resellers. Even at a bad rate I pay $1139 from techdata |
| 14:42.12 | SpaceBass | Hmmhesays I used to be such a huge SRV (and double trouble) fan.. i've recenly been ripping the last few cds that I didnt have online and re-discovered some of those |
| 14:42.19 | bkw_ | Hi mr kram |
| 14:43.00 | mountie | Ah - need to go through reseller... Recomendations for Canadian ones? |
| 14:43.10 | Hmmhesays | Katty: nope another hendrix tune, little wing |
| 14:43.16 | Hmmhesays | wonderful rendition |
| 14:43.16 | dieck | hey there. Is there any way to dial an iax-adress from the asterisk-commandline? I dont want to phone, I just want to test my configs and hear it ring :) |
| 14:43.20 | kram | hi dubyah |
| 14:43.25 | Holos | mountie: I'm a Canadian reseller.. |
| 14:43.41 | nowork | Can I be a Canadain reseller..how? |
| 14:43.41 | Hmmhesays | SpaceBass: yeah that man is a legend |
| 14:44.16 | Holos | nowork: Sell $50,000 of IBM in 6 months, have an existing account with Supercom, Ingram or Techdata and you're all set. |
| 14:44.49 | Holos | dieck: Dial yourself from the IAX phone.. |
| 14:45.15 | *** join/#asterisk shanky (~shanky@238.Red-80-33-29.pooles.rima-tde.net) |
| 14:45.35 | icebalm | hello all, checking out asterisk's page I can't seem to find if it will do something I'm looking for, particularly, having a 3-5 person conference with the ability to have it dial out and have whoever picks up immediately join the conference, is this possible with asterisk? |
| 14:46.20 | gordonjcp | yeah |
| 14:46.28 | icebalm | cool |
| 14:46.45 | gordonjcp | well - I think so anyway, here's what I've managed before |
| 14:47.02 | Holos | icebalm: I think it may be easier to call the person from a second line, wait till they answer, then transfer them to the conference location. I don't know how you would tell the conference to dial out exactly. |
| 14:47.06 | gordonjcp | conference call, with calls coming in |
| 14:47.15 | Katty | Hmmhesays: k |
| 14:47.16 | *** join/#asterisk bikola (~bikola@049.018.dsl.nsw.iprimus.net.au) |
| 14:47.18 | gordonjcp | Holos: I'm coming to that |
| 14:47.34 | key2 | bkw_: are the hub inside the PA168phone 10baseT or 100BaseT |
| 14:47.35 | key2 | ? |
| 14:47.48 | gordonjcp | icebalm: create a call file that goes in /var/spool/asterisk/outgoing and then tells it to dial an extension and connect it to the conference |
| 14:47.58 | icebalm | Holos: was thinking maybe some web conference administration page or via DTMF commands? |
| 14:48.37 | Holos | icebalm: Web is easy, have it write a call file like gordonjcp mentioned. DTMF may require hacking the meetme conference. |
| 14:48.41 | gordonjcp | icebalm: the way I did it just involves creating a file then moving it to the directory - you could do that with a script |
| 14:48.48 | icebalm | web would be preferable |
| 14:48.51 | *** join/#asterisk Mike (~mike@201.135.48.252) |
| 14:48.53 | gordonjcp | icebalm: dead easy |
| 14:49.20 | icebalm | nice, I'm compiling it now, I'll check out the docs some more and see what I can do |
| 14:49.25 | bkw_ | key2, I think its 10/100, but why not go and research it yourself? |
| 14:49.32 | gordonjcp | problem is that the cgi script for the web interface will require write access to /var/spool/asterisk/outgoing |
| 14:49.34 | Mike | guys i have a GS 488 here, im trying to use the FXO to dial with asterisk, i created a sip user name outgoing exten => _9[1-8][0-9]XXXXXX,4,Dial(SIP/outgoing,10,D(${EXTEN:1})) but i just get dialtone |
| 14:49.35 | bkw_ | the phone I have supports POE |
| 14:49.37 | icebalm | thanks |
| 14:49.46 | Mike | any ideas? |
| 14:50.36 | [Jedi] | Digium hardware can work as "Network"? |
| 14:50.47 | SpaceBass | i wish my switch suppored PoE... now I have to buy an injector for each cisco phone... |
| 14:50.50 | [Jedi] | I want three E1s as CPE and another one as network |
| 14:51.09 | [Jedi] | pri show span 1,2,3 and 4 seem to be correctly configured |
| 14:51.18 | [Jedi] | and my CPE E1s work well |
| 14:51.22 | [Jedi] | but not my network E1 |
| 14:51.50 | *** join/#asterisk doolph (doolph@201.226.146.178) |
| 14:51.51 | [Jedi] | in the remote side I get a "Received Remote Alarm" |
| 14:52.05 | [Jedi] | and asterisk's zttool shows the E1 as "RED" |
| 14:52.09 | Holos | SpaceBass: Polycoms? |
| 14:52.53 | SpaceBass | Holos what about em? |
| 14:53.04 | SpaceBass | anyone have a recomendtion on an e-mail to fax service? |
| 14:53.31 | Holos | SpaceBass: sorry, I didn't read that very well, I need a cisco 802.11af cable for every polycom phone.. |
| 14:53.32 | doolph | check inter7 |
| 14:54.04 | SpaceBass | Holos is the PoE requirements on a polycom the same as the cisco? |
| 14:54.04 | mountie | Holos: Where you located? |
| 14:55.26 | tzafrir | Holos, "web" means giving the web server write permissions to the asterisk spool directory, or some other priviliges elevation mechanism |
| 14:55.45 | doolph | ...... |
| 14:55.45 | *** join/#asterisk mariogamboa (~sudaikdd@201.138.151.155) |
| 14:55.54 | mariogamboa | hi all |
| 14:56.36 | tzafrir | hi mariogamboa |
| 14:57.01 | Holos | tzafrir: Or to a random directory, and have a cron job sit and watch for call files, scan for any badness and then move them to the asterisk spool directory. |
| 14:57.11 | mariogamboa | i need to know if asterisk can simulate a secondary tone because when i push the 9 i don't recive tone but can make the call because in the dial pattern have 9|. |
| 14:57.41 | mariogamboa | i need when press 9 can hear a secondary tone and after can make the call |
| 14:57.45 | mariogamboa | is posible |
| 14:57.49 | SpaceBass | mariogamboa check the wiki for dial as you go |
| 14:57.57 | SpaceBass | I seem to recall seeing a post about that |
| 14:58.06 | SpaceBass | (or maybe it was about how it doesnt work with *) |
| 14:58.12 | mariogamboa | the dial is correct because i can make the calls |
| 14:58.27 | Holos | tzafrir: You could also use the manager interface to create the call files too.. that may be a more secure option. |
| 14:58.40 | Hmmhesays | manager interface to create call files? what? |
| 14:59.05 | mariogamboa | the question is when i push the key 9 asterisk can make a secondary dial tone like panasonic or another pbx made it |
| 14:59.20 | Hmmhesays | yes |
| 15:00.03 | SpaceBass | Hmmhesays really? I thought that was the whole deal about not doing dial-as-you go or whatever its called |
| 15:00.16 | Holos | Hmmhesays: Sorry, not create call files, but tell asterisk to call. |
| 15:00.21 | gordonjcp | Hmmhesays: I think he means create the call, not call file |
| 15:00.28 | Nuxi | "originate" |
| 15:00.31 | Hmmhesays | you can set in the dialplan to play back dialtone |
| 15:02.55 | shanky | hi, I'm having a rare problem with my asterisk, I have configure it to use two external accounts with telsome.dk, the outbound calls work, but I can't call between the extensions |
| 15:03.06 | doolph | mariogamboa it is possible |
| 15:04.06 | shanky | I always get a message like this: |
| 15:04.13 | shanky | <PROTECTED> |
| 15:04.27 | doolph | then it's wrong password |
| 15:05.09 | mariogamboa | spacebass wiki? |
| 15:05.11 | mariogamboa | where |
| 15:05.14 | SpaceBass | ~wiki |
| 15:05.22 | SpaceBass | hummm |
| 15:05.35 | SpaceBass | http://www.voip-info.org/ |
| 15:05.43 | mariogamboa | ah |
| 15:05.44 | mariogamboa | i see |
| 15:05.46 | ast_freak | Does Asterisk support SRTP (encryption)? |
| 15:05.55 | shanky | doolph: then why I can do an outbound call? |
| 15:06.44 | doolph | shanky sometimes you dont need to be registered to make calls |
| 15:08.32 | mariogamboa | yep |
| 15:10.45 | *** join/#asterisk razu (~razu@80-235-89-85-dsl.prn.estpak.ee) |
| 15:11.45 | *** join/#asterisk Twister (Twister@216.30.232.108) |
| 15:11.57 | *** join/#asterisk mhnoyes (~mhnoyes@user-38lc125.dialup.mindspring.com) |
| 15:13.02 | Wonka | hrm. |
| 15:14.29 | Wonka | i've got an asterisk installation which receives calls via SIP and the only extension connects them to a meetme. ztdummy is loaded. when i call it, there's some looping noise. |
| 15:14.33 | coppice | ast_freak: no. like to add it? :-) |
| 15:15.08 | Wonka | what can that be? |
| 15:15.17 | ast_freak | coppice: It's not within my skill set to do so right now, but that's for offering. :) |
| 15:15.21 | Wonka | if someone wants to listen: sip:8600@195.244.243.6 |
| 15:17.54 | Twister | question, i currently have * CVS-v1-0-12/01/04-10:39:12, and i want to upgrade to 1.0.9 stable, are there any issues with doing this? |
| 15:18.01 | Twister | can i just download and build |
| 15:18.15 | Ariel_ | Twister, no |
| 15:18.34 | razu | can anyone gime me a hint ... how to solve this problem ??? >>> http://razu.hk.tpu.ee/error |
| 15:19.04 | razu | give * |
| 15:20.39 | Ariel_ | razu, have you sent an email to the folks from astguiclient about it? there is a mailing list for them. |
| 15:21.07 | *** join/#asterisk GaVa (~fernando@200.196.30.254) |
| 15:21.11 | toot | sob. people are telling me the TDM400P are trouble. i ain't having any luck at all - i would love to know what kernel i need to be running as a starting point :) |
| 15:21.23 | doolph | 2.4.x |
| 15:21.37 | razu | Ariel_ : no ... i've been searching about vicidial problems for 2 weeks ... and everyone says that it's working fine ... i dont get it ... i'm having lots of problems :S |
| 15:21.42 | Ariel_ | toot, I am using them. I have no problems I even fax via them. |
| 15:21.43 | toot | can i not get of with a 2.6? |
| 15:21.47 | T-Squared | what is the trouble with the tdm400p? |
| 15:22.01 | T-Squared | razu that is a perl error with conflicts on the install of time:hires |
| 15:22.11 | toot | i have no idea - just i'm not having any joy getting it running - and am now hearing mobo death rumours, etc |
| 15:23.08 | T-Squared | I have been running it for about 3 months now just fine from the basics standpoint. Only problem I have now is being able to pick up my analog line call waiting, can't seem to get it to flash to the second call thru asterisk |
| 15:23.35 | DarthClue | 2.6 kernels are fine. |
| 15:23.38 | Lee__ | how would I tell Asterisk to respond to a SIP 302 redirect message to route an outgoing call? Presently, it isn't responding. |
| 15:23.39 | razu | T-Squared : but is it problem of the workstation or server ??? i've installed Time::HiRes 1.55 to my workstation but it didnt solve it :S ... and i tried to get it work under XP, but i get the same error ... |
| 15:23.54 | mariogamboa | yep |
| 15:24.16 | razu | T-Squared : commenting out that 122 line solves a bit my problem ... but then i cant get Vicidial working :S |
| 15:24.20 | mariogamboa | no |
| 15:25.05 | T-Squared | I think you need to install Time::HiRes version 1.66 not 1.55 maybe it requires it |
| 15:25.05 | razu | T-Squared : it dials out ... but it cant resolve if the number it called is online or not ... so it keeps hanging :| |
| 15:25.31 | *** part/#asterisk lehel (~lehel@82.79.20.17) |
| 15:26.07 | razu | T-Squared : ok ... i'll try 1.66 |
| 15:26.25 | [Jedi] | uhm |
| 15:26.28 | T-Squared | I don't see in the perl code where it is checking the version |
| 15:26.29 | [Jedi] | I'm stress-testing my asterisk |
| 15:26.43 | [Jedi] | in TOP, i get an "irq" load of + than 50% |
| 15:28.26 | *** join/#asterisk |dennis| (~dennis@200.32.197.2) |
| 15:29.13 | *** join/#asterisk dtwilson (~dave@host217-36-121-129.in-addr.btopenworld.com) |
| 15:29.30 | mariogamboa | anyhere have experence with e1 mfcr2 for mexico? |
| 15:29.53 | dtwilson | hello all - anybody got voicemail configured with database support? |
| 15:30.09 | DarthClue | http://www.darthclue.org/archives/5-Shameless-Plug.html |
| 15:30.28 | |dennis| | Question: Right now with a pbx box that we have from the local telephone company, a user who wants to dial out has to first enter a security code number in order to have access to the line...can this be done with asterisk???? |
| 15:31.22 | mariogamboa | yes i know |
| 15:31.51 | dtwilson | |dennis| - you mean like dial '9' for outside line? r dial an access key code to unlock the outside line? |
| 15:32.03 | dtwilson | either way asterisk can do both afaik |
| 15:32.11 | tzafrir | hmmm, I see the following was added in the cvs diff of 1.0: |
| 15:32.16 | tzafrir | CFLAGS+=$(shell if uname -r|grep -q 8.2.0 ; then echo " -DOSX10_4 " ; fi) |
| 15:32.18 | DarthClue | |dennis|: yes, it can. |
| 15:32.26 | |dennis| | dtwilson - yes..dial an access key code to access the outside line.... :) |
| 15:32.27 | stkn | does anybody know which license is used by asterisk perl? i've tried to contact the author, but no response so far... |
| 15:32.36 | |dennis| | oh thanks..DarthClue and dtwilson.... |
| 15:32.47 | tzafrir | can anybody think of an existing linux kernel release name that will break it? |
| 15:33.23 | tzafrir | 2.6.8-200 ? |
| 15:33.24 | stkn | not unless we move to 2.8.x.y |
| 15:33.31 | *** join/#asterisk icebalm (~icebalm@42.speede.mycybernet.net) |
| 15:33.59 | tzafrir | stkn, there's no ^ . and '.' is a wildcard |
| 15:34.02 | stkn | "." is dangerous then |
| 15:34.04 | Hmmhesays | anyone know if debian has 8XXX series 3ware raid controller support? |
| 15:36.03 | *** join/#asterisk trickyrick77 (~rsegrest@207.111.174.1) |
| 15:36.16 | [Jedi] | I'm stress-testing my asterisk, and I get a very high percent of IRQ in "TOP" |
| 15:36.25 | [Jedi] | how can I lower it? |
| 15:36.29 | T-Squared | hmmhesays it's built into the kernel so yes |
| 15:36.56 | *** join/#asterisk gravemind (~omgwtfbbq@GXTi.developer.freenode) |
| 15:37.05 | Hmmhesays | good call |
| 15:37.28 | mishehu | Hmmhesays: getting pata or sata raid? |
| 15:37.34 | *** join/#asterisk icebalm (~icebalm@42.speede.mycybernet.net) |
| 15:37.51 | Hmmhesays | probably sata, doesn't really matter though, this system will have 5-10 phones on it |
| 15:38.04 | mishehu | Hmmhesays: will your server do anything other than asterisk? |
| 15:38.11 | Hmmhesays | not a damn thing |
| 15:38.46 | Hmmhesays | will be a low cost pc with a decent raid card |
| 15:38.57 | mishehu | Hmmhesays: ah, well, if you were going to do heavier work I would have recommended the 95xx series, but for just running asterisk for 5-10 phones an 8xxx sounds almost overkill |
| 15:39.22 | Hmmhesays | theres a 20 dollar different between the pata and sata cards |
| 15:39.37 | Hmmhesays | i'm not going to fark around with software raid, even on a small system |
| 15:40.36 | mishehu | Hmmhesays: raid1 seems fine for software, but anything raid5 or 6 I'd not recommend for software raid. get the sata controller for sure. |
| 15:40.50 | Hmmhesays | i know |
| 15:41.24 | Hmmhesays | for $120 bucks I'll go with hardware |
| 15:42.04 | *** join/#asterisk lehel (~lehel@82.79.20.17) |
| 15:42.11 | GaVa | [Jedi]: how are u testing it? |
| 15:42.17 | Lee__ | software raid1 on modern hardware performs very well |
| 15:43.36 | *** join/#asterisk eKo1 (~bernd@metrored-gw.tropicohn.com) |
| 15:43.44 | pawalls | Software raid is a pain in the ass.. |
| 15:43.56 | *** part/#asterisk Lee__ (~lee@ool-44c26fa3.dyn.optonline.net) |
| 15:44.02 | pawalls | I use it, but I wish I had just gone with a 3ware controller. |
| 15:44.12 | *** join/#asterisk doolph (doolph@201.226.146.178) |
| 15:44.22 | *** join/#asterisk angler (~angler@angler.digium.sponsor.pdpc) |
| 15:44.46 | Hmmhesays | heh, I could probably get away with a p3 |
| 15:44.49 | *** join/#asterisk MrbBelvedr (~tt@ip68-227-218-250.dc.dc.cox.net) |
| 15:44.57 | *** join/#asterisk [TK]D-Fender (~joe@4.67.252.216.dsl1.colba.net) |
| 15:47.42 | T-Squared | can you upgrade asterisk at home to a newer asterisk at home without reconfiguring everything? |
| 15:48.10 | doolph | yes |
| 15:48.18 | *** join/#asterisk bintut (~bintut@202.128.40.243) |
| 15:48.28 | T-Squared | how ? documentation source? |
| 15:48.54 | doolph | read their website |
| 15:49.11 | dtwilson | Hmmmhesays - you'd certainly get away with a wee PIII 700 with 256 Ram and running apache, MySQL and much more - we have that here and with no probs - same volume of phones as you specified |
| 15:49.31 | T-Squared | yes, and where does it talk about upgrade? |
| 15:49.50 | SpaceBass | T-Squared no, there is no upgrade path yet |
| 15:50.01 | SpaceBass | T-Squared it will replace your current config |
| 15:50.26 | T-Squared | grr which means outage while you reconfigure everything and regresssion test it all again |
| 15:50.43 | Hmmhesays | i think for the price i'll just go with a dell poweredge |
| 15:50.46 | dtwilson | T-Squared - simply save a copy of /etc/asterisk folder and contents from existing config - then install the newer version and import old configs back in |
| 15:51.15 | Hmmhesays | $450 bucks and poweredges are good |
| 15:51.24 | SpaceBass | dtwilson that works--- usually.. but often you miss on new features they've added |
| 15:51.59 | *** join/#asterisk Juxt (~Juxt@64.135.20.202) |
| 15:52.05 | dtwilson | SpaceBass - yeah but he seems to be aiming for minimum downtime as opposed to increased features |
| 15:52.08 | Juxt | good evening |
| 15:52.12 | Juxt | or morning LOL |
| 15:52.17 | bintut | hello all.. |
| 15:52.19 | Ariel_ | dtwilson, aah uses amp which means when you change a setting via the amp interface it will over change your files. |
| 15:52.22 | Juxt | what causes this: WARNING[5943] chan_sip.c: Maximum retries exceeded on call 20f6b4eb2bf4256c33468b5830f9a2d7@192.168.16.17 for seqno 102 (Non-critical Request) |
| 15:52.22 | Juxt | <PROTECTED> |
| 15:52.24 | Katty | SpaceBass: way to set my hilight off |
| 15:52.27 | SpaceBass | dtwilson good point.. but if it ain't broke... why upgrade if you aren't getting features? |
| 15:52.34 | SpaceBass | Katty did it? sorry |
| 15:52.39 | Hmmhesays | Juxt a call that isn't working right |
| 15:52.41 | Katty | SpaceBass: just teasing ;) |
| 15:53.04 | Juxt | Hmmhesays: well i need to know possible causes of that |
| 15:53.12 | Hmmhesays | Juxt sip debug my friend |
| 15:53.18 | bintut | i'm confused with the Digium Wildcard TDM400P. are these cards for 64bit PCI slots or is it ok to insert them on a 32bit PCI slots? |
| 15:53.30 | dtwilson | SpaceBass - also a good point - but some people seem hellbent on upgrading things :) |
| 15:53.42 | *** part/#asterisk Myshenka (~gunde@217.9.101.85) |
| 15:54.05 | dtwilson | bintut - 32 bit is fine |
| 15:54.05 | SpaceBass | dtwilson I'm still running windows for workgroups... people keep telling me about this 95 thing... see no reason to upgrade |
| 15:54.05 | SpaceBass | :) |
| 15:54.10 | Hmmhesays | upgrading production is a no no |
| 15:54.46 | dtwilson | yeah I'm using a CVS snapshot from March 2004 in my production box |
| 15:55.06 | T-Squared | looking more for bugfixes than new features, couple of minor database things and still have some weird customizations to get caller id working to my house line W: prefixed for work calls, H: prefixed for house calls |
| 15:55.13 | dtwilson | and only cos it needed upgrading for UK callerid |
| 15:55.29 | bintut | dtwilson: really? so i can just insert the TDM40B and TDM22B cards to my existing p3 box? |
| 15:55.31 | T-Squared | although was looking at the contact manager |
| 15:55.33 | SpaceBass | T-Squared what version of @home are you running? |
| 15:55.50 | Hmmhesays | she bang she bangs oh baby when she move she moves I go crazy //william hung |
| 15:55.57 | icebalm | DarthClue: gah, $300 credit towards registration != $300 :( |
| 15:56.07 | bkw_ | yes it is |
| 15:56.13 | *** join/#asterisk Malthus (~herman@port0129-abn-s-adsl.cwjamaica.com) |
| 15:56.18 | icebalm | it assumes you're going |
| 15:56.19 | christo | I have a problem. I am sending out faxes with spandsp and txfax, but most of them come out distorted, or a bit squashed - some very bad, some just not very good quality. Are there any tricks to fixing this? |
| 15:56.26 | bkw_ | haha |
| 15:56.46 | dtwilson | has anybody managed to get voicemail db support working? |
| 15:57.11 | SpaceBass | T-Squared what version of @home are you running? |
| 15:57.31 | dtwilson | just tried http://voip-info.org/tiki-index.php?page=Asterisk+voicemail+database and checkout doesnt seem to include the vm-modules required |
| 15:57.42 | T-Squared | good question, amp is 1.10.007 so 1.0? |
| 15:57.47 | dtwilson | has something changed since that post? |
| 15:57.47 | *** join/#asterisk enots (dimka@freelsd.net) |
| 15:58.17 | DarthClue | icebalm: i'll make you a special deal, if you can get it posted to slashdot and at least 50 people register because of it I will give you $300 cash. |
| 15:58.28 | SpaceBass | T-Squared you should be able to prefix caller ID just fine... but since PSTN doesnt provide DID info you have to manually add it |
| 15:59.03 | T-Squared | no I can and have it working (mostly) occasionally I get an inbound call with caller-id set to the extension of the analog phone? |
| 15:59.16 | icebalm | holy crap 50 people |
| 15:59.27 | T-Squared | my PSTN caller id does come thru |
| 16:00.14 | DarthClue | icebalm: it's a fair trade. besides, you would be much happier coming to cluecon and spending the $300 there than anywhere else... |
| 16:00.22 | SpaceBass | yeah, CID should, but there is no DID info for routing or prefixing in AMP |
| 16:00.29 | icebalm | DarthClue: you are probably right |
| 16:01.06 | T-Squared | exactly, so I had to hand modify some files that are not re-written to get it to work correctly |
| 16:01.23 | dtwilson | T-Squared - you could do a teeny bit of MySQL, perl AGI magic to roll your own ACD app if thats what you're trying to do (from my understanding) |
| 16:01.38 | *** join/#asterisk funxion (~nunya@mtnuser.icgws.com) |
| 16:01.58 | dtwilson | i.e. re-direct callers based on incoming CID to associated agents |
| 16:02.06 | dtwilson | I have something similar on our setup |
| 16:02.07 | icebalm | DarthClue: but alas I cannot attend |
| 16:03.13 | *** join/#asterisk kerspoon (~james@213-232-83-17.dsl.prodigynet.co.uk) |
| 16:03.14 | DarthClue | icebalm: hence, why we are happy to modify the offer, 1 slashdot ( or any major news outlet ) post + 50 confirmed (ie paid) registrations and you get $300. |
| 16:03.18 | T-Squared | it is working now, needed to do a different context on the zapata.conf file, then modifiy the dial plan to route the calls appropriately (my phones and the house phones) prefixing the callerid info with H so I know it is a house call |
| 16:03.57 | icebalm | it's a sad day when slashdot is considered a major news outlet :( |
| 16:04.09 | *** join/#asterisk OloBola (~casper_sp@adsl-69-110-121-26.dsl.pltn13.pacbell.net) |
| 16:04.36 | *** join/#asterisk Lee__ (~Lee@ool-44c26fa3.dyn.optonline.net) |
| 16:05.00 | OloBola | can I output incoming call audio to an application using AGI? |
| 16:05.08 | DarthClue | icebalm: well, we don't consider it major, but it is quite geeky, and for cluecon, we need geeky, or freaky, or people with money willing to buy from the vendors. |
| 16:05.43 | icebalm | DarthClue: well the major part I agree with, news outlet is sketchy at best, heh |
| 16:06.20 | icebalm | DarthClue: what about a link from fark, would you consider that major enough? |
| 16:06.26 | icebalm | they're freaks |
| 16:06.55 | DarthClue | icebalm: if it gets the registrations then yes. |
| 16:08.46 | *** join/#asterisk jo3sm1th (~email@ppp-69-233-25-103.dsl.irvnca.pacbell.net) |
| 16:08.58 | jo3sm1th | Is there a softphone with a built in proxying function? I know "firefly" does not have this |
| 16:09.01 | *** join/#asterisk rjreb (~rjreb@greatwall.amer.net) |
| 16:11.52 | OloBola | Hi. can I output incoming call audio to an application using AGI? |
| 16:12.39 | Juxt | OloBola: good one |
| 16:13.11 | OloBola | I must of asked a dumb question again |
| 16:13.25 | Juxt | OloBola: no, not at all. i'd like to know that too. |
| 16:13.34 | darwin35 | what is a good site other then atcomm for voip phones and ata devices |
| 16:13.49 | Juxt | voipsupply |
| 16:13.54 | *** part/#asterisk T-Squared (~ted@hidden.serreyn.com) |
| 16:13.57 | darwin35 | I used atcomm but them moved to flash pages I cant view |
| 16:15.08 | OloBola | I think a tomato just hit me on the back of the head |
| 16:15.44 | gravemind | hmmm |
| 16:15.47 | gravemind | my pap2 isn't cooperating. |
| 16:16.01 | OloBola | I was hoping to send audio stream to a another machine for processing |
| 16:16.07 | gravemind | initially it worked, but only after 10 seconds of silence would it actually dial out - now it just sends a busy signal :/ |
| 16:16.49 | DarthClue | OloBola: talk to anthm, he can probably put something together that will make that possible. |
| 16:16.53 | *** join/#asterisk MRH2 (~Mr_happy@fcirc-adsl.demon.co.uk) |
| 16:17.17 | OloBola | DarthClue: ok, thanks |
| 16:18.17 | MRH2 | ne1 know if there is a way to get the real channel an agent is logged in at from the agent number |
| 16:19.33 | DarthClue | MRH2: you using chan_agent? |
| 16:20.46 | *** join/#asterisk jsharp (~jsharp@65.88.255.132) |
| 16:20.54 | MRH2 | chan_agent? |
| 16:20.56 | *** join/#asterisk Koshatul (~evangelio@ip157.net65.ipnetworks.net.au) |
| 16:21.15 | DarthClue | MRH2: how do you configure your agents / queues |
| 16:21.29 | *** join/#asterisk nikko (~nikko@69.85.201.170) |
| 16:22.28 | nikko | any nufone support persons here? |
| 16:22.40 | doolph | nop |
| 16:23.06 | MRH2 | just using agentcallbacklogin no Queues would like to be able to refence what SIP extension an agent is logged in at |
| 16:25.42 | MRH2 | is there a variable that refers to this based on agent number? |
| 16:27.35 | Hmmhesays | does the ip501 have a switch on it like cisco 7960's? |
| 16:27.50 | MRH2 | yes Hmm |
| 16:27.58 | Ariel_ | Hmmhesays, yes |
| 16:28.23 | *** join/#asterisk yaaar (~chatzilla@lifebook.tranquility.net) |
| 16:28.24 | yaaar | word |
| 16:28.30 | DarthClue | MRH2: take a look at http://www.voip-info.org/wiki-Asterisk+cmd+AgentCallbackLogin, i think you can get to a global variable which will give that. |
| 16:28.31 | *** join/#asterisk razu (~razu@80-235-89-85-dsl.prn.estpak.ee) |
| 16:28.38 | SpaceBass | ohhh... does the cisco switch in those phones pass PoE? |
| 16:28.41 | yaaar | what's a good pri card likely to cost me? and what model do you guys recommend? |
| 16:28.48 | Ariel_ | SpaceBass, no |
| 16:29.00 | DarthClue | yaaar: what kind of pri card? |
| 16:29.42 | Wonka | hrm. funny looping noise stops if one enables only certain codecs. |
| 16:29.58 | yaaar | DarthClue: uh.....i really don't know the first thing about it. i've got a spare pri in our modem pool that we aren't really utilizing, and i'd like to plug it into * |
| 16:30.20 | DarthClue | Wonka: HEAD or STABLE? |
| 16:30.28 | Wonka | DarthClue: debian stable |
| 16:30.33 | Wonka | DarthClue: in a meetme |
| 16:30.35 | SpaceBass | Ariel_ oh well... so much for getting rid of my wirenest |
| 16:30.36 | Wonka | DarthClue: via sip |
| 16:30.55 | *** join/#asterisk viLeR (1000@ip-47-252.telesat.com.co) |
| 16:31.24 | Ariel_ | yaaar, spare PRI nice. then you need the TE110p board for a one port. |
| 16:31.33 | Ariel_ | yaaar, it's around $ 600.00 |
| 16:31.35 | DarthClue | yaaar: oh, duh...you can get a TE110 or TE105 from digium |
| 16:31.52 | MRH2 | k i'll have another look .... was looking for something like variable realchannel_agent123 = SIP/789 |
| 16:31.58 | nikko | anyone have their nufone 800 DID's giving "all circuits are busy" right now? |
| 16:32.19 | *** join/#asterisk jaiger (~jaiger@fire.innovationsw.com) |
| 16:32.22 | yaaar | cool |
| 16:32.25 | Ariel_ | it's lunch time. See you all later. |
| 16:33.51 | blitzrage | another hour though... |
| 16:34.00 | Qwell | I want a free lunch |
| 16:34.22 | blitzrage | I'm getting a free lunch in an hour :) |
| 16:34.28 | Qwell | damn you |
| 16:34.30 | Qwell | :p |
| 16:34.32 | blitzrage | actually I'm getting paid to eat it too |
| 16:34.33 | blitzrage | lol |
| 16:34.49 | DarthClue | blitzrage: you are coming to cluecon, right? |
| 16:34.56 | Qwell | blitzrage: we got paid to go bowling last Wednesday |
| 16:35.07 | SpaceBass | nice... my 7960 is on the fedex truck for delivery |
| 16:35.46 | cpatry | bowling: what a sport! :P |
| 16:36.45 | |dennis| | Question? A Wildcard TDM400P has four ports to connect to four different regular phone lines? Is that about right? |
| 16:37.13 | jsharp | If you have 4 FXO modules in it, yes. |
| 16:37.20 | DarthClue | |dennis|: depends on the modules. |
| 16:37.44 | jsharp | Put FXO modules in it for phone lines, FXS modules in it for phones. |
| 16:38.21 | |dennis| | hmmmm...thanks..... |
| 16:41.37 | Qwell | DarthClue: mind a quick msg? |
| 16:42.25 | DarthClue | Qwell: bout? |
| 16:42.38 | Qwell | cluecon |
| 16:42.46 | DarthClue | sure. |
| 16:44.21 | *** part/#asterisk jeremywhiting (~jeremy@65-103-254-239.slkc.qwest.net) |
| 16:46.08 | Wonka | Jul 14 18:46:01 WARNING[5477]: db.c:47 dbinit: Unable to open Asterisk database |
| 16:46.12 | Wonka | whuss? |
| 16:46.25 | Wonka | "noload => app_db.so" doesn't help |
| 16:48.11 | MikeJ[Laptop] | Wonka, that is for ast_db.. it is part of core... |
| 16:48.20 | MikeJ[Laptop] | that is weird... |
| 16:48.20 | Wonka | hm. |
| 16:48.29 | Wonka | how do i make that error go away? |
| 16:48.33 | Qwell | missing an engine? |
| 16:48.52 | Wonka | can it be because some file doesnt belong to asterisk's user? |
| 16:49.27 | Qwell | sounds like that could be the case |
| 16:50.34 | Wonka | open("/var/lib/asterisk/astdb", O_RDWR|O_CREAT, 0664) = -1 EACCES (Permission denied) |
| 16:50.38 | Wonka | hrm |
| 16:50.41 | *** join/#asterisk Mother_ (~kvirc@93.Red-80-32-127.pooles.rima-tde.net) |
| 16:50.44 | Wonka | couldn't it just _say_ that? |
| 16:51.09 | *** join/#asterisk anonymouz666 (~anonymouz@200.218.192.3) |
| 16:51.27 | cpatry | ls -l /var/lib/asterisk/astdb ? |
| 16:52.18 | Wonka | cpatry: it belonged to root, not to asterisk. chown -R done. |
| 16:52.35 | cpatry | and its fine now i presume? |
| 16:52.35 | Wonka | the problem was finding the problem, not solving it... |
| 16:52.40 | Wonka | jep |
| 16:52.56 | Wonka | if it had told me which file it had trouble with... |
| 16:52.58 | Wonka | *sigh* |
| 16:53.01 | *** join/#asterisk Netrunz (~ff@195.137.136.242) |
| 16:53.07 | Netrunz | hello everybody |
| 16:53.09 | *** join/#asterisk Twister (Twister@216.30.232.108) |
| 16:53.18 | Netrunz | anyone willing to help a newbie? |
| 16:53.40 | cpatry | Wonka: good idea too. |
| 16:53.50 | Twister | Netrunz: ask ya question |
| 16:54.01 | DarthClue | Netrunz: maybe, what's the question. |
| 16:54.12 | blitzrage | DarthClue: I doubt I'll be going to ClueCon |
| 16:54.17 | Nugget | http://www.cafepress.com/nucleartacos.26229228 |
| 16:54.22 | blitzrage | DarthClue: to be honest I'm sick of it already... |
| 16:55.13 | Netrunz | ok I got asterisk set up with 3 internal lines in sip mode and works like a charm. Now I want to let my internal phone call through a VoIP line I got from my provider. How do I tell asterisk to divert the calls toward that line? and how do i configure it to use my voip (SIP) external line? |
| 16:55.32 | Twister | goot a TDM400P in a box, has 4 pots lines hooked to it, wanted to be able to actually specify which channel to use, would i do Dial(ZAP/#/phonenumber) where # = channel number |
| 16:55.41 | DarthClue | blitzrage: sorry to hear that. |
| 16:55.50 | DarthClue | Netrunz: configure it in extensions.conf |
| 16:56.00 | Netrunz | ok darth but... how |
| 16:56.03 | Netrunz | :O |
| 16:56.05 | DarthClue | Twister: yes. |
| 16:56.10 | Netrunz | any good doc? |
| 16:56.12 | Netrunz | ;) |
| 16:56.12 | anthm | interesting, nobody is ever seems to be sick of free code do they |
| 16:56.34 | DarthClue | Netrunz: the wiki knows all ... http://www.voip-info.org/tiki-index.php?page=Asterisk+config+extensions.conf |
| 16:56.35 | Twister | Netrunz: www.voip-info.org |
| 16:56.44 | *** part/#asterisk perlmonky (~perlmonky@12.109.119.54) |
| 16:57.04 | Netrunz | Ok thanks. i'll take alook at itand let u know :) |
| 16:57.43 | anthm | err, interesting, nobody ever seems to be sick of free code!, so busy coding even more free code I can't type engish |
| 16:58.04 | OloBola | is a network status page too much to ask |
| 16:58.16 | yaaar | yeah funny about that. i've also noticed that nobody seems to get sick of free beer |
| 16:58.23 | Qwell | OloBola: Whats the point? |
| 16:58.31 | Qwell | OloBola: If the network is down, you won't be able to access it. :P |
| 16:58.57 | gordonjcp | yaaar: I got sick *from* free beer |
| 16:59.00 | Qwell | kram: afternoon |
| 16:59.03 | *** join/#asterisk zeedo (~zeedo@www.reboot-robot.net) |
| 16:59.07 | OloBola | the site can always be reached though! Amazing |
| 16:59.16 | yaaar | gordonjcp: and yet, I'll bet you still aren't sick *of* it, are you? |
| 16:59.33 | Twister | i think what he wants is a status page for * |
| 17:00.24 | OloBola | yeah! Asterisk is down again! Damn it digium |
| 17:00.37 | DarthClue | OloBola: what is down? CVS? |
| 17:01.32 | OloBola | just a provider. I will not name names though |
| 17:01.43 | DarthClue | OloBola: what kind of service do you need? |
| 17:01.48 | OloBola | shit happens! |
| 17:01.56 | OloBola | nothing |
| 17:02.02 | OloBola | just grumbling |
| 17:03.39 | OloBola | wahoooo! thx. |
| 17:04.39 | gordonjcp | yaaar: nope, that's why I brew about 10 gallons a week |
| 17:04.56 | yaaar | gordonjcp: good call! that's a fair bit more than i get brewed |
| 17:05.30 | *** join/#asterisk wunderkin (kev@12-215-218-160.client.mchsi.com) |
| 17:05.36 | gordonjcp | heh |
| 17:05.47 | gordonjcp | yaaar: my flatmate and I are complete pissheads |
| 17:05.58 | bkw_ | haha |
| 17:05.58 | gordonjcp | well, we're Scottish, what do you expect? |
| 17:06.10 | bkw_ | flatmate, pisshead.. such words |
| 17:06.34 | Lee__ | when did the zaptel driver for the TDM400P cards change from wcfxs to wctdm? |
| 17:06.35 | gordonjcp | he's moving to his own flat soon, and you know what that means... |
| 17:06.36 | gordonjcp | yup |
| 17:06.47 | gordonjcp | ... more space for fermenting bins |
| 17:06.52 | Lee__ | change names, that is. |
| 17:06.55 | DarthClue | Lee__: quite a while back. |
| 17:07.12 | Lee__ | DarthClue, thanks. |
| 17:07.30 | yaaar | gordonjcp: right on. So are we....but we still have to buy a lot of beer; we don't get around to brewing more than once every couple of weeks. But we've got a really nice imperial stout on tap right now |
| 17:08.21 | Nugget | yay brewing. |
| 17:08.58 | yaaar | gordonjcp: i just built a keg fridge last night |
| 17:09.11 | gordonjcp | ah, I'm going to do that |
| 17:09.14 | yaaar | already had one, but it was a really bunk fridge (found on side of road) that leaked a bit |
| 17:09.31 | yaaar | found another fridge on the side of the road last night with better seals. it gets colder too |
| 17:09.37 | yaaar | i was stoked |
| 17:09.41 | gordonjcp | yaaar: I'm keeping an eye out on freecycle for one |
| 17:09.54 | gordonjcp | what did you do, take out the shelves and put a hole in the door? |
| 17:09.56 | yaaar | well, if you weren't across an ocean, you could have my old one |
| 17:10.00 | gordonjcp | heh |
| 17:10.14 | gordonjcp | I've got about 6 bottles of my Imperial Stout left |
| 17:10.15 | yaaar | i offered it to like 20 people last night and no takers |
| 17:10.17 | greg_work | DarthClue: uh, i just checked out zaptel stable and it changed from wctdm TO wcfxs... |
| 17:10.21 | *** part/#asterisk Juxt (~Juxt@64.135.20.202) |
| 17:10.40 | gordonjcp | yaaar: I've got a nice IPA on, brewed up some elderflower in the wort |
| 17:10.43 | yaaar | i need to get a counterpressure filler so i can fill a few bottles here and there |
| 17:10.44 | bkw_ | yes stable is almost a year old |
| 17:10.45 | gordonjcp | quite tanky, and light |
| 17:10.51 | bkw_ | its wcfxs in stable |
| 17:10.54 | yaaar | gordonjcp: elderflower, huh? hmmm.... |
| 17:10.56 | bkw_ | shortly there after it was changed |
| 17:10.57 | gordonjcp | s/tanky/tangy/ |
| 17:11.06 | greg_work | i used to have a wctdm.ko, (built 2005-01-04) and now its wcfxs, with an alias wctdm wcfxs |
| 17:11.14 | bkw_ | yes it will alias now |
| 17:11.27 | gordonjcp | yaaar: yeah I had this stuff called "Village Elder" when I was in England last year, which was a light hoppy IPA with elderflower |
| 17:11.41 | yaaar | sounds promising |
| 17:11.49 | gordonjcp | just the job to prime the digestive system on a hot afternoon, pre-curry |
| 17:11.55 | greg_work | does HEAD use wctdm or wcfxs then/ |
| 17:11.56 | yaaar | oh yeah |
| 17:12.29 | *** join/#asterisk [cc]smart (~smart@gw.ptr-62-65-149-158.customer.ch.netstream.com) |
| 17:12.40 | *** join/#asterisk scratchrf (~ryan@63-226-200-214.tukw.qwest.net) |
| 17:13.29 | Qwell | greg_work: wctdm |
| 17:14.37 | greg_work | so it started out wcfxs, around 1.0 switched to wctdm, then around 1.0.7 or 1.0.8 switched to wcfxs (with wctdm as an alias), and now its back? |
| 17:14.59 | greg_work | er, back to wctdm again? |
| 17:15.14 | greg_work | thats just. weird. |
| 17:15.17 | tzafrir | there is no wctdm in 1.0, right? |
| 17:15.53 | greg_work | mine was wctdm until today |
| 17:16.07 | greg_work | i was running CVS stable somewhere around 1.0.7 |
| 17:16.26 | greg_work | now i'm running CVS stable as of about 3 hours ago |
| 17:17.09 | wunderkin | what all will help for debugging purposes in case of a crash? i'm running with safe_asterisk so its using -g, i saw something on the list about enabling debugging.. is that -d? |
| 17:17.29 | Lee__ | wctdm.ko tells me "Freshmaker passed register test". What's Freshmaker, besides Mentos? |
| 17:17.46 | greg_work | are there any plans to release a 1.1 or whatever based on CVS head anytime soon? |
| 17:18.16 | tzafrir | greg_work, 1.2? |
| 17:18.24 | *** join/#asterisk stevekstevek (~chatzilla@notafirewall.horizonlive.net) |
| 17:18.28 | DarthClue | greg_work: the last discussed release was a 1.2 based on a frozen CVS-HEAD but I haven't heard much since it was discussed a couple of weeks ago. |
| 17:18.48 | greg_work | (in theory, since you all tell me that cvs HEAD is "usually stable" it should be a short process to do a feature freeze for a couple weeks, get everything cleaned up, and release) |
| 17:19.01 | DarthClue | greg_work: yeah, in theory. |
| 17:19.04 | tzafrir | It seems that they aim for August or something similar |
| 17:19.36 | DarthClue | it requires getting all the devs and cvs-commit people together for a couple of days to work on it. |
| 17:19.43 | *** join/#asterisk alfred_ (~alfcertai@200.119.18.102) |
| 17:20.11 | alfred_ | srt: I have a little question about Asterisk-Java, do you have a minute? |
| 17:21.21 | greg_work | has there ever been talk about moving to a stable/testing/unstable type workflow? have a stable, like how it is now (official releases), unstable HEAD, and a 'testing' where basically finished things from unstable can go.. |
| 17:22.10 | stevekstevek | anyone having problems with nufone? |
| 17:23.00 | greg_work | i would be much more comfortable using that kind of thing where (in theory) there should be no major bugs in testing... i don't feel comfortabl using HEAD because basically its a gamble if you get a usable copy or not .. at least, without following development (cvs logs, -dev mailing list, etc) closely, which i unfortunately don't have enough time to do |
| 17:24.36 | *** join/#asterisk jansaell (~jan@h94n2c1o1124.bredband.skanova.com) |
| 17:24.36 | scratchrf | yes, i'm having problems with incoming nufone |
| 17:24.54 | stevekstevek | OK, so it's not just me. Getting reorder from your telco? |
| 17:24.58 | scratchrf | yes |
| 17:25.01 | *** join/#asterisk Hmmhesays (negative3k@66.173.103.108) |
| 17:25.06 | Hmmhesays | niven hates me, lol |
| 17:25.08 | stevekstevek | kinda like they're not being announced to telcos or something.. |
| 17:25.50 | alfred_ | anyone with some Asterisk-Java experience? |
| 17:26.40 | *** join/#asterisk clinthome (~clinthome@snap.helixsystems.com) |
| 17:28.53 | Qwell | stevekstevek: me too :( |
| 17:33.42 | alfred_ | anyone with some Asterisk-Java experience? |
| 17:34.43 | doolph | uh |
| 17:34.48 | *** join/#asterisk Tili (~Tili@202-133-65-220-dialup.sat.net.pk) |
| 17:38.43 | *** join/#asterisk SpaceBass (~sp@c-24-125-184-203.hsd1.va.comcast.net) |
| 17:41.44 | Qwell | thats funny... |
| 17:42.05 | Qwell | I was just getting 724ms to my 7960 over my lan |
| 17:42.19 | SpaceBass | would there be a way to disable/enable MOH with a vertical service code... like call waiting, etc? |
| 17:42.21 | alfred_ | Qwell? |
| 17:42.21 | doolph | lol |
| 17:42.26 | alfred_ | you too what? |
| 17:42.42 | doolph | how you can get 724ms in a lan |
| 17:42.46 | doolph | that's impossible |
| 17:43.30 | bkw_ | Qwell, is that a qualify? |
| 17:43.33 | bkw_ | thats 724? |
| 17:43.45 | bkw_ | remember qualify != ping |
| 17:44.12 | jsharp | Its not impossible. I get 900-1000ms ping times when I get a traffic storm at home. |
| 17:44.15 | SpaceBass | if I am going to use a variable for controlling music on hold (IE change it from a real path to empty path and vice versa) do I want to set a golobal and change it or a channel? |
| 17:45.09 | doolph | jsharp pinging to one pc to another pc? in a LAN? |
| 17:45.18 | doolph | over internet its ok |
| 17:45.18 | jsharp | Yup. |
| 17:45.28 | doolph | then your comp mad sucks |
| 17:45.40 | Qwell | bkw_: yeah, a qualify |
| 17:45.41 | doolph | or your router/switch whatever |
| 17:45.48 | jsharp | No. It just happens when I get a multicast storm. |
| 17:46.11 | bkw_ | Qwell, that is not a ping |
| 17:46.14 | bkw_ | so you're fine |
| 17:46.25 | bkw_ | you might wanna update your phone or something |
| 17:46.26 | Nugget | sounds liuke jsharp needs some traffic shaping |
| 17:46.31 | bkw_ | its acting retarded |
| 17:46.34 | jsharp | When that happens, every port on my core switch goes to full saturation and my FDDI ring goes to full saturation. |
| 17:46.40 | Qwell | bkw_: 7.3 sip |
| 17:46.47 | bkw_ | i never had issues with that |
| 17:46.51 | bkw_ | are you running CDP? |
| 17:46.53 | Qwell | its my router I'm sure |
| 17:46.55 | Qwell | cdp? |
| 17:46.56 | bkw_ | an cisco switches? |
| 17:47.01 | bkw_ | cisco discovery protocol |
| 17:47.05 | blitzrage | cisco discovery protocol |
| 17:47.06 | Qwell | nah |
| 17:47.07 | blitzrage | heh |
| 17:47.09 | Qwell | just my linux router |
| 17:47.18 | bkw_ | is the router your linux box? |
| 17:47.23 | bkw_ | and asterisk box |
| 17:47.26 | Qwell | no |
| 17:47.30 | bkw_ | ok |
| 17:47.30 | bkw_ | haha |
| 17:47.46 | Qwell | yeah, I have asterisk running on my 110mhz sparc router. :p |
| 17:47.49 | doolph | i have router and asterisk at the same machine |
| 17:47.52 | Qwell | That'll be the day |
| 17:48.10 | doolph | i dont feel any difference |
| 17:51.04 | *** join/#asterisk jtodd (~jtodd@204.91.156.2) |
| 17:51.30 | *** join/#asterisk _omer (dfsdf@203.215.180.254) |
| 17:52.09 | _omer | what RED HAT 9 Linux services are needed for Asterisk? |
| 17:52.11 | cj | I just installed the dev kit in one of my linux machines and need some basic help. Anyone feel like holding my hand? :) |
| 17:52.21 | Nugget | _omer: the kernel. |
| 17:52.33 | jsharp | Hey, I ran Asterisk on a Sparc with 2 80Mhz Supersparc II processors. It worked pretty well. |
| 17:52.52 | _omer | Nuddet: ok......and? |
| 17:53.04 | key2 | jsharp: what about the FXO/FXS cards ? |
| 17:53.43 | jsharp | Couldn't use those...unless someone has built an SBUS FXO/FXS board. |
| 17:53.59 | Qwell | jsharp: doubt it, heh |
| 17:54.02 | _omer | what is the installation and handling difference of asterisk in RED HAT 9 and FEDORA? |
| 17:54.03 | key2 | what's the machine ? |
| 17:54.07 | key2 | blade ? |
| 17:54.12 | key2 | ultra 60 ? |
| 17:54.13 | jsharp | SparcStation 20. |
| 17:54.24 | key2 | I could eventually make one :) |
| 17:54.41 | key2 | but it would be a pain in the ass to make the zaptel driver :) |
| 17:54.52 | jsharp | The TDM400s should work in a PCI-based ultra machine, though. |
| 17:55.06 | key2 | jsharp: what about the drivers ? |
| 17:55.19 | key2 | and do you know like octo proc sun with pci ? |
| 17:55.31 | cj | jsharp: is that a 32-bit machine? |
| 17:55.38 | key2 | no |
| 17:55.39 | key2 | 64 |
| 17:55.41 | key2 | :) |
| 17:55.43 | key2 | sparc are 64 |
| 17:55.44 | cj | damn. how old is that? |
| 17:55.48 | jsharp | Depends on your OS. There have been people working on Solaris zaptel drivers. |
| 17:55.49 | Qwell | key2: not all sparc |
| 17:55.54 | Qwell | and, I don't think the ss20 is 64 |
| 17:55.58 | Qwell | thats a 4m, right? |
| 17:55.59 | jsharp | The ss20 is 32. |
| 17:56.01 | jsharp | Yes, 4m. |
| 17:56.06 | Qwell | yeah.. |
| 17:56.22 | jsharp | An octoproc with PCI? Ummm. not off the top of my head. |
| 17:56.45 | key2 | exactly |
| 17:57.07 | key2 | I wonder if asterisk would run better on a E4500 with 12 400Mhz proc or on a dual opteron |
| 17:57.14 | key2 | or quad opteron |
| 17:57.21 | Qwell | key2: quad dual-core opteron? |
| 17:57.27 | SpaceBass | is there a way to set music on hold on a per channel basis? IE in sip.conf? |
| 17:57.37 | key2 | Qwell: for example |
| 17:57.43 | key2 | Qwell: what would be the best |
| 17:57.47 | key2 | quad dual core opteron ? |
| 17:57.53 | Qwell | I'd get that |
| 17:58.07 | key2 | or a sun fire with 32 sparc CPU ? |
| 17:58.30 | Qwell | e15k? |
| 17:58.44 | cj | do you folks advise building from CVS over debian packages? |
| 17:58.56 | Qwell | cj: or build stable |
| 17:59.06 | Qwell | asterisk packages aren't ever very...good |
| 17:59.39 | cj | thanks, Qwell. If CVS doesn't work, I'll grab a stable tarball |
| 17:59.56 | file | Developer conference starts in 2 minutes on 996. SHAGADELIC! |
| 18:01.26 | key2 | Qwell: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=5787198599&category=51238&ssPageName=WDVW&rd=1 |
| 18:01.27 | *** join/#asterisk wwh (~wadeh@4.22.175.195) |
| 18:01.29 | key2 | that for example |
| 18:01.34 | key2 | would work good ? |
| 18:01.55 | Qwell | You have $100k to spend on a server? |
| 18:02.01 | Qwell | oh, $442k |
| 18:02.10 | blitzrage | cj: packages are almost always out of date |
| 18:02.18 | blitzrage | cj: just install from CVS or .tar.gz |
| 18:02.29 | key2 | Qwell: how many concurrent calls with echo cancel can I handle with that one ? |
| 18:02.36 | Qwell | key2: 3 |
| 18:02.44 | key2 | ?????//// |
| 18:02.55 | Qwell | maybe 4 |
| 18:02.56 | key2 | Qwell ? 3 what ? calls or 3k calls ? |
| 18:03.04 | Qwell | 3 calls |
| 18:03.07 | key2 | why ? |
| 18:03.09 | key2 | why not more ? |
| 18:03.14 | Qwell | I don't know, I don't own one |
| 18:03.17 | _omer | anybody who have tried asterisk in RED HAT 9 minimum installation ? |
| 18:03.21 | Qwell | but, I would guarantee you'd get at least 3 |
| 18:03.25 | key2 | Qwell: so why do you say 3 or 4 |
| 18:04.29 | *** join/#asterisk smani (~smani@64-8-240-154.client.dsl.net) |
| 18:04.56 | wwh | anyone have lots of FCS errors with wct4xxp? |
| 18:04.56 | cj | looks like asterisk needs a pretty new libpri, eh? |
| 18:05.06 | smani | Hi. I have a question on Asterisk licensing. Can somebody please help ? |
| 18:05.14 | Qwell | smani: ask away |
| 18:05.17 | smani | We have non-free alert messaging software. Now we are planning write a client talking to Asterisk server for VoIP messaging and distribute it with our software. I want to know if this |
| 18:05.18 | smani | would place any licensing restrictions on our software by using Asterisk. We have done no modifications to asterisk code. |
| 18:05.48 | Qwell | smani: I suggest talking to somebody Digium |
| 18:05.49 | Qwell | at |
| 18:06.03 | Qwell | They *do* have a seperate license available for it |
| 18:06.13 | cj | smani: If you don't link to it, I don't think it would cause a problem. |
| 18:07.20 | smani | We call asterisk from our software by writing a AGI script. Is that linking ? |
| 18:07.32 | Qwell | smani: call Digium and talk to them about it |
| 18:07.32 | jsharp | No. |
| 18:08.08 | *** join/#asterisk gwynpen (~gwynpen@p54AAD6E8.dip.t-dialin.net) |
| 18:09.20 | wwh | Greetings, I have a question about getting FCS errors on an ISDN PRI. |
| 18:10.50 | wwh | I have test equipment generating HDLC messages and my quad T1 card is getting a lot of FCS errors (one every few minutes). |
| 18:12.16 | *** part/#asterisk scratchrf (~ryan@63-226-200-214.tukw.qwest.net) |
| 18:12.33 | wwh | Card is a T410P quad T1 with zaptel drivers 1.0.7 and 1.0.8. Kernel is 2.6.5 on FC 2.0 |
| 18:13.09 | |Vulture| | wwh: put it on a loopback and run a looptest |
| 18:13.38 | |Vulture| | wwh: but first check for sharing IRQs and run zttest to verify that it stable to the PCI bus |
| 18:14.26 | wwh | I guess I would have to make a special cable for the loopback, right? |
| 18:14.50 | key2 | wwh: well that's two wires |
| 18:14.52 | key2 | can't u do it ? |
| 18:15.18 | wwh | no prob |
| 18:15.35 | alfred_ | FCS error are not your fault wwh, it's related to a lot of compatibilty problems with digium cards |
| 18:16.04 | smani | Thank you guys. Just got off the phone with digium. Seems like it(licensing) is not an any issue as long as our code isn't linked with asterisk |
| 18:16.13 | alfred_ | I'm thinking that digium cards have problems even with the air... he he |
| 18:16.21 | |Vulture| | alfred_: this is true |
| 18:16.32 | |Vulture| | I am testing a Sagnoma card right now |
| 18:16.49 | |Vulture| | got sick of HDLC aborts |
| 18:17.01 | alfred_ | Yes, Sangome doesnt have that kind of troubles |
| 18:17.15 | |Vulture| | alfred_: you use Sangoma? |
| 18:17.27 | alfred_ | I'm starting use Sangoma cards too |
| 18:17.50 | _omer | Is installing ASterisk in Fedora or FREEBSD different than installing in RED HAT? |
| 18:18.04 | |Vulture| | FreeBSD yes |
| 18:18.08 | |Vulture| | Fedora is Redhat |
| 18:19.02 | *** join/#asterisk cfrank_ (~cfrank@bi01p1.co.us.ibm.com) |
| 18:19.03 | darwin35 | not by much |
| 18:19.26 | darwin35 | on bsd its easier because you install from the ports tree and it does allthe work |
| 18:19.36 | |Vulture| | yea |
| 18:19.40 | |Vulture| | apt2get |
| 18:20.20 | darwin35 | freebsd gets all the pkgs and builds and installs. it runs great on bsd |
| 18:21.13 | darwin35 | I am working on Festival 1.95 now to fix bugs and get it compiling and working on bsd for asterisk |
| 18:21.28 | darwin35 | and most other functions work fine |
| 18:22.34 | _omer | |Vulture| : nothing is different in FEDORA and Redhat? |
| 18:23.06 | |Vulture| | not really fedora is the freeware branch from Redhat |
| 18:23.08 | wwh | Can digium cards be made to have very low FCS rates, or should I consider another card? |
| 18:23.09 | darwin35 | and yes I know I get bashed for not being a linux user and that bsd is not supported but why not support it is my fricking question |
| 18:23.14 | |Vulture| | and RHE is the commercial break |
| 18:23.33 | |Vulture| | wwh: you running on an Intel Based mobo? |
| 18:23.37 | brookshire | FCS rate? |
| 18:23.48 | wwh | not sure. I'll check |
| 18:23.53 | brookshire | and which card? |
| 18:24.01 | _omer | |Vulture| : which FEDORA ? core 1 , core 2 etc |
| 18:24.04 | |Vulture| | T410P |
| 18:24.17 | DarthClue | _omer: * on FC is easier. I have it running on FC3 at the moment and I am about to try it on FC4 as well. |
| 18:24.27 | |Vulture| | I run CentOS 4.1 |
| 18:24.39 | |Vulture| | its basically RHE + FC3 |
| 18:24.43 | wwh | Card: TE410P, Fedora Core 2, 2.6.5 (stock) and 2.6.10 kernels |
| 18:24.50 | Nugget | Linux is poo. :) |
| 18:24.54 | brookshire | te4xx have very few incompatability issues ;) |
| 18:25.05 | |Vulture| | te or t? |
| 18:25.16 | |Vulture| | the te110xp has issues with Aborts |
| 18:25.27 | _omer | actually I know how to install asterisk in RH 9....now I think I need to change OS.... |
| 18:25.42 | DarthClue | _omer: FC or CentOS will work fine. |
| 18:26.01 | *** join/#asterisk MicC_ (~sum1@CPE000c419ce901-CM000a7363f92c.cpe.net.cable.rogers.com) |
| 18:26.18 | MicC_ | I am having a hella time connecting 2 Asterisk boxes together |
| 18:26.25 | cfrank_ | How do I fet switch contunue hunting to another asterisk if no channed is available? |
| 18:26.30 | toot | if i do a fresh make install of zaptel/libpri/asterisk i'm getting the following when modprobe wctdm |
| 18:26.32 | DarthClue | MicC_: connecting how? |
| 18:26.37 | MicC_ | IAX |
| 18:26.38 | toot | WARNING: Error inserting zaptel (/lib/modules/2.6.10/misc/zaptel.ko): Invalid module format |
| 18:26.40 | MicC_ | its easy I know |
| 18:26.44 | MicC_ | but man...its hard |
| 18:26.44 | file | DarthClue: back to work, slacker! |
| 18:26.45 | MicC_ | haha |
| 18:26.52 | toot | and the same for wctdm.ko - any idea why? |
| 18:27.01 | _omer | DarthClue: everything is same in CENTOS and RH9 ? like CVS , Folders, etc etc ? |
| 18:27.30 | DarthClue | _omer: there are a few differences, but you will be happier with FC or CentOS as they are the continuation of the RH line. |
| 18:28.00 | MicC_ | Centos: RHEL compiled from RH's own source rpms |
| 18:28.18 | _omer | ok DarthClue...thanks |
| 18:28.50 | DarthClue | toot: make clean and then make install right? |
| 18:29.28 | toot | yep |
| 18:29.34 | Katty | :> |
| 18:29.38 | Katty | k, all better |
| 18:30.02 | Qwell | pamples? |
| 18:30.02 | DarthClue | toot: try removing the modules directory then doing it. |
| 18:30.23 | DarthClue | Qwell: it will be explained at cluecon. |
| 18:30.38 | Qwell | DarthClue: you'll have to explain it at astricon too :p |
| 18:30.46 | file | DarthClue: get us slashdotted man! |
| 18:30.50 | DarthClue | I'll send notes back with your sponsoree. |
| 18:31.20 | Qwell | DarthClue: bribe CmdrTaco |
| 18:31.26 | DarthClue | file: um, slashdot was bought out by the big orange shift-8 and won't help us anymore. |
| 18:31.30 | Qwell | get him in free, he'll post the article |
| 18:31.44 | file | DarthClue: NOOOOO! MAKE IT SO |
| 18:31.46 | DarthClue | Qwell: if he wants in free, tell him to contact the empire and we will arrange it. |
| 18:31.57 | brookshire | hehe |
| 18:32.14 | hardwire | hello fellow voipists |
| 18:32.24 | Katty | and voipettes. |
| 18:32.27 | Katty | thankyouverymuch |
| 18:32.36 | *** part/#asterisk Cresl1n (~matt@207.111.174.1) |
| 18:32.41 | file | brookshire: Mattttttttt |
| 18:32.43 | toot | nope. removed the modules form /lib/modules/2.6.10/misc/ make clean && make install |
| 18:32.51 | toot | same error - Invalid module format |
| 18:32.58 | DarthClue | toot: HEAD? |
| 18:33.24 | toot | stable i believe :) |
| 18:33.42 | DarthClue | toot: OS and * version? |
| 18:33.58 | toot | actually - arse - i think it was head |
| 18:34.05 | brookshire | hi |
| 18:34.09 | Katty | asl |
| 18:34.14 | toot | will try again - whats current stable? |
| 18:34.17 | blitzrage | 24/m/Canada :D |
| 18:34.20 | Katty | ... |
| 18:34.21 | file | brookshire: how are you? |
| 18:34.22 | brookshire | oh no you didn't do the asl |
| 18:34.23 | Katty | way to miss my sarcasm |
| 18:34.26 | blitzrage | lol |
| 18:34.31 | file | 18/m/Canada!!! |
| 18:34.34 | blitzrage | I noticed it and ignored it :D |
| 18:34.35 | Katty | hottttt |
| 18:34.42 | file | that's hot |
| 18:34.44 | blitzrage | Katty: so I've been told |
| 18:34.46 | DarthClue | american sign language! |
| 18:34.47 | brookshire | 26/m/huntsville, al |
| 18:34.48 | brookshire | ;) |
| 18:34.51 | Katty | file: who's hot |
| 18:34.54 | Katty | file: do what? |
| 18:34.56 | file | Katty: that. |
| 18:34.58 | DarthClue | toot: 1.0.9 but we prefer HEAD. |
| 18:35.01 | Katty | ... |
| 18:35.02 | blitzrage | brookshire: you work at Digium? |
| 18:35.06 | brookshire | yeah |
| 18:35.07 | Katty | stop messing up my pitiful humor! |
| 18:35.10 | *** join/#asterisk drooth (~drooth@ip68-107-113-28.sd.sd.cox.net) |
| 18:35.20 | drooth | anyone recommend a good MUSIC ON HOLD replacement program? |
| 18:35.27 | Katty | a cd player? |
| 18:35.32 | drooth | the asterisk music on hold program is taking 99% of my CPU |
| 18:35.36 | brookshire | drooth: russell just put in an awesome patch |
| 18:35.42 | file | drooth: do you have 0.59r? |
| 18:35.45 | DarthClue | 2?/m/3rd rock from the sun. |
| 18:35.47 | brookshire | i don't know when it will be commited |
| 18:35.54 | *** join/#asterisk Tili (Tili@202-133-65-110-dialup.sat.net.pk) |
| 18:35.59 | drooth | running lastet asterisk @ home ISO... |
| 18:36.07 | brookshire | bah.. use head |
| 18:36.13 | file | head is good |
| 18:36.19 | drooth | brookshire: ok. how do I get it |
| 18:36.20 | blitzrage | brookshire: did I see you at Spain? |
| 18:36.21 | DarthClue | drooth: dump ass and get HEAD. |
| 18:36.28 | drooth | file: ok |
| 18:36.32 | brookshire | blitzrage: no.. i'm the other other matt |
| 18:36.36 | file | Katty: nooo :( |
| 18:36.40 | Katty | file: k |
| 18:36.45 | blitzrage | brookshire: lol - I met two matts already! |
| 18:36.49 | drooth | ... how about a link??? |
| 18:36.52 | DarthClue | drooth: http://voip-info.org/tiki-index.php?page=Asterisk+Download and follow the directions for the development version. |
| 18:36.53 | brookshire | we have 5 total |
| 18:36.57 | Katty | ???!!oneoneone |
| 18:37.05 | toot | just downloaded 1.0.9 and have same result |
| 18:37.06 | blitzrage | brookshire: are you the Matt I met at Astricon 2004 and talked to in the lobby? |
| 18:37.14 | brookshire | no |
| 18:37.15 | brookshire | lol |
| 18:37.16 | drooth | darth: thx |
| 18:37.17 | toot | debian/2.6.10 asterisk 1.0.9 |
| 18:37.22 | DarthClue | drooth: yvw |
| 18:37.23 | brookshire | i haven't ever been to any conferences |
| 18:37.44 | drooth | darth: so this version has a working music on hold??? |
| 18:37.47 | Katty | DarthClue: you guys ever decide what time you're coming down? |
| 18:38.13 | OloBola | dependable voip provider == oxymoron? |
| 18:38.36 | DarthClue | drooth: most of us don't use ass and prefer HEAD. you will have to do some additional configuration steps if you aren't using HEAD but you will be better off for it. |
| 18:38.39 | Qwell | OloBola: inexpensive, stable, has good customer service |
| 18:38.42 | Qwell | OloBola: pick 2 |
| 18:38.50 | DarthClue | OloBola: what kind of services do you want? |
| 18:38.59 | drooth | darth: ok |
| 18:39.23 | OloBola | DarthClue: I'm prepiad somewhere at the moment |
| 18:39.24 | Wonka | Katty: me too |
| 18:39.30 | DarthClue | Katty: that's up to bkw_, I'm just along for the ride, but I think he was wanting to come down on Monday and stay overnight, then head out first thing Tuesday am. |
| 18:39.38 | Katty | DarthClue: k |
| 18:40.01 | DarthClue | OloBola: depending on what you need, we can get you something now that doesn't require up front costs. |
| 18:40.17 | *** join/#asterisk sivana (~sivana@mixdown.ca) |
| 18:40.29 | sivana | ~mailist |
| 18:40.49 | OloBola | DarthClue: I'm just putsing around at the moment building pet projects |
| 18:40.57 | *** join/#asterisk stkn (~stkn@stkn-active-pdpc.developer.gentoo) |
| 18:41.00 | sivana | ~maillist |
| 18:41.05 | drooth | 0.59r has working music on hold? |
| 18:41.11 | *** join/#asterisk Darwin35 (~darwin@ip70-186-117-198.ma.dl.cox.net) |
| 18:41.17 | drooth | who is russel |
| 18:41.17 | sivana | bah.. how do I search the mail list using google? |
| 18:41.32 | Katty | DarthClue: :> |
| 18:41.49 | drooth | try http://www.mail-archive.com/asterisk-users@lists.digium.com |
| 18:41.57 | DarthClue | sivana: go to google and put in site:lists.digium.com ????? where ????? is what you want to find. |
| 18:42.09 | sivana | ah.. that's it |
| 18:42.11 | sivana | ty |
| 18:42.11 | DarthClue | drooth: 0.59r is the version of mpg123 i believe. |
| 18:42.15 | toot | will try with head now |
| 18:43.04 | Darwin35 | use madplay insted of mpg123 or use native |
| 18:43.09 | drooth | darth: ah.. what about using madplayer instead |
| 18:43.17 | drooth | darwin35: lol same thought |
| 18:43.19 | Darwin35 | I use madplay |
| 18:43.45 | Madkiss | aww. |
| 18:43.50 | DarthClue | drooth: i would recommend native, madplay has been used by some people. |
| 18:43.55 | Madkiss | What would cause an error like this one? Jul 14 20:41:34 WARNING[9596]: chan_sip.c:6851 handle_response: Forbidden - wrong password on authentication for INVITE to '"Martin Loschwitz" <sip:madkiss@freenet.de>;tag=as7bcf0507' |
| 18:43.57 | Darwin35 | I have the string for musiconhold.conf |
| 18:44.03 | Madkiss | I am registered with that server, at least |
| 18:44.32 | DarthClue | Madkiss: looks like it doesn't like the password that you are trying to authenticate with. |
| 18:45.00 | Madkiss | DarthClue: err? Asterisk is registered with the VoIP-provider already |
| 18:45.03 | drooth | anyone use * with unlimited mobile to mobile......... |
| 18:45.12 | Lee__ | DIgium officially recommends using CVS HEAD for both asterisk and zaptel. Isn't that a bit odd? |
| 18:45.17 | *** join/#asterisk alphaque (~alphaque@218.111.61.41) |
| 18:45.18 | toot | argh. same problem :) Invalid module format - using HEAD |
| 18:45.21 | Qwell | Lee__: Not really |
| 18:45.35 | Darwin35 | no you get more features in head |
| 18:45.41 | brookshire | Lee__: however when 1.2 comes out.. they will probably recommend 1.2 |
| 18:45.45 | Lee__ | I usually think of the current CVS as the place where development is done. |
| 18:45.48 | DarthClue | Lee__: no, it's expected for the moment. |
| 18:46.23 | Lee__ | doesn't that run the risk of a production system going down cause of some syntax error? |
| 18:46.23 | DarthClue | Lee__: sounds like you may need to redo your debian install (just guessing) cause it is borking the modules. |
| 18:46.29 | wwh | Update: by FCS rate, I meant the number of FCS errors per some measurement of time, e.g., per day. This should be quite low. |
| 18:46.48 | Lee__ | DarthClue, how did you know I'm using Debian and having module problems? |
| 18:47.04 | DarthClue | er...i used the force. |
| 18:47.17 | DarthClue | toot: sounds like you may need to redo your debian install (just guessing) cause it is borking the modules. |
| 18:47.21 | toot | :D |
| 18:47.38 | toot | i was really hoping i would not have to |
| 18:47.44 | toot | ah well |
| 18:47.46 | Lee__ | toot, you using Sarge? |
| 18:47.55 | toot | yeah with custom kernel |
| 18:48.03 | Lee__ | try with the stable kernel? |
| 18:48.08 | DarthClue | toot: sometimes [sh]it happens and you have to just fsck it all and start over. |
| 18:48.17 | toot | yar ah well |
| 18:48.47 | wwh | Hardware: Intel S875 server with single XEON, 1G RAM, Promise controller with 2 SATA drives, e100 and e1000 NICS |
| 18:49.39 | *** join/#asterisk cursor (~kevin@andromeda.office.cursor.biz) |
| 18:49.47 | *** join/#asterisk gwynpen (~gwynpen@p54AAD6E8.dip.t-dialin.net) |
| 18:50.56 | cursor | Don't tell everyone |
| 18:51.03 | cursor | You'll start rumours |
| 18:51.10 | bkw_ | about what? |
| 18:51.18 | cursor | :-) |
| 18:51.51 | cursor | aaaargh! |
| 18:51.52 | file | want a pic of me?!? |
| 18:51.56 | Madkiss | hm, I don't get this |
| 18:51.59 | cursor | I don't think you'll sell many pictures of me |
| 18:52.14 | *** join/#asterisk sivana (~sivana@mixdown.ca) |
| 18:52.24 | DarthClue | the pictures show bkw_ in a compromising position with his cursor. |
| 18:52.31 | cursor | haha |
| 18:52.51 | cursor | :-) |
| 18:52.56 | file | ooh |
| 18:52.56 | hardwire | hmm |
| 18:53.00 | cursor | bk_ |
| 18:53.11 | hardwire | anybody wanna do my job for me? |
| 18:53.15 | hardwire | the pay stinks |
| 18:53.18 | cursor | That depends upon your job |
| 18:53.25 | DarthClue | hardwire: depends on the job and the pay. |
| 18:53.31 | Strom_C | man, you know you're too into this voip stuff when you have a cisco phone next to the toaster oven |
| 18:53.31 | hardwire | this is a yes/no like situation here cursor. |
| 18:53.58 | DarthClue | Strom_C: i have my voip setup so that i can use it from anywhere, even my cell. |
| 18:53.59 | cursor | I'm told that I have a job. I wonder what it is |
| 18:54.12 | DarthClue | cursor: your job is to keep bkw_ happy. |
| 18:54.15 | hardwire | you already think too much so no job for you |
| 18:54.17 | cursor | haha |
| 18:54.26 | file | Strom_C: sexy |
| 18:54.48 | hardwire | I need a cohort pretty badly actually |
| 18:54.56 | hardwire | I wonder if I should just post a job listing here. |
| 18:55.01 | hardwire | anybody wanna move to anchorage? |
| 18:55.08 | hardwire | and can lift more than their own body weight. |
| 18:55.10 | file | nope |
| 18:55.14 | Beirdo | nope and nope |
| 18:55.34 | hardwire | poo |
| 18:55.45 | hardwire | its incredibly hard finding experienced techies up here |
| 18:55.51 | *** part/#asterisk gwynpen (~gwynpen@p54AAD6E8.dip.t-dialin.net) |
| 18:55.55 | hardwire | not that they are all stolen away.. they just don't exist. |
| 18:56.06 | Beirdo | must be the stinking cold winters :) |
| 18:56.07 | cursor | Just get them to work remotely |
| 18:56.08 | *** join/#asterisk stkn (~stkn@stkn-active-pdpc.developer.gentoo) |
| 18:56.10 | mutilator | hardwire: yea i'll move |
| 18:56.13 | mutilator | if you're serious.. |
| 18:56.13 | hardwire | Beirdo: where do you live? |
| 18:56.18 | Beirdo | Toronto |
| 18:56.20 | hardwire | mutilator: send resume to shane@tdxnet.com |
| 18:56.21 | mutilator | i would gladly move back to anchorage |
| 18:56.26 | hardwire | even better! |
| 18:56.27 | mutilator | ok |
| 18:56.30 | hardwire | you know it sucks here |
| 18:56.34 | Beirdo | heh |
| 18:56.36 | mutilator | heh |
| 18:56.40 | mutilator | not that bad.. |
| 18:56.56 | Beirdo | my next move is likely to be south, not further north |
| 18:57.05 | cursor | South Pole |
| 18:57.09 | hardwire | Beirdo: I bet our winters are just as harsh as outside of toronto |
| 18:57.28 | hardwire | infaaaact |
| 18:57.29 | Beirdo | I know that parts of Alaska get way colder than here |
| 18:57.34 | hardwire | yeh |
| 18:57.35 | mutilator | anchorage isn't so bad cause it's close to the water |
| 18:57.39 | mutilator | it's just overcast all winter long |
| 18:57.40 | Beirdo | yeah, makes sense |
| 18:57.41 | hardwire | 400 miles north |
| 18:57.45 | drooth | hey with music on hold, how do you use native??? |
| 18:57.46 | mutilator | thats the only bad part |
| 18:57.48 | yaaar | hey guys, can i use SetCallerID on a PRI? |
| 18:57.55 | mutilator | resume sent |
| 18:58.02 | hardwire | mutilator: had that on hand eh :) |
| 18:58.07 | mutilator | yea |
| 18:58.09 | mutilator | :P |
| 18:58.12 | Beirdo | mutilator: not the ONLY bad part |
| 18:58.12 | drooth | As it turns out I am using CVS version!! |
| 18:58.13 | mutilator | ofcourse |
| 18:58.20 | hardwire | I am already not going to hire you |
| 18:58.23 | hardwire | based on your name |
| 18:58.27 | Beirdo | there is the issue of it being the wrong country for me. :) |
| 18:58.31 | hardwire | I know I will fuck it up |
| 18:58.35 | mutilator | heh, been my name since i was 13 |
| 18:58.40 | hardwire | and probably give you a stupid nickname |
| 18:58.42 | mutilator | i was on fort rich while i was there tho |
| 18:59.00 | mutilator | most ppl just say mut.. |
| 18:59.07 | hardwire | sending me a resume in word |
| 18:59.13 | *** join/#asterisk ohad (~ohad@22-231-13-72.cosmoweb.net) |
| 18:59.16 | hardwire | heh |
| 18:59.23 | mutilator | rather something else? everyone wants word that has asked |
| 18:59.38 | hardwire | did you live in anchorage? |
| 18:59.48 | hardwire | mutilator: hah.. no openoffice is fine |
| 18:59.50 | ohad | hi all, does anyone know of a solid company that give either out of the pkg or consulting solutions for asterisk around new york city? |
| 19:00.01 | mutilator | hardwire: ya on fort richardson |
| 19:00.24 | hardwire | ohad: go to the techie part of new york.. put a huge * on your chest and start screaming |
| 19:00.24 | hardwire | I bet you would find a few |
| 19:00.36 | ohad | does anyone know - .fonality.com ? |
| 19:00.41 | hardwire | mutilator: our subsidiary works donig range work up there |
| 19:00.44 | Beirdo | or at least you'll get change in your hat |
| 19:01.03 | ohad | heh |
| 19:01.08 | hardwire | I hated YDI |
| 19:01.19 | mutilator | :O |
| 19:01.22 | hardwire | hyperlink is a much better company |
| 19:01.28 | SpaceBass | got a new (to me) 7960 with 3.x sccp on it... trying to upgrade to sip and it keeps reporting that it cannot find the file listed in OS79xx.txt but the images are in the same directory as the OS file |
| 19:01.31 | mutilator | they were bought out by ydi |
| 19:01.32 | hardwire | how do you feel about travelling all the goddamn time |
| 19:01.38 | hardwire | mutilator: you lie! |
| 19:01.44 | mutilator | no.. |
| 19:01.48 | hardwire | thats why they suck now |
| 19:01.49 | hardwire | damn |
| 19:01.52 | mutilator | heh |
| 19:01.55 | Qwell | SpaceBass: ooo, I just did that. Get the universal loader, and put a SEPxxx.cnf there |
| 19:02.06 | hardwire | mutilator: this would require a lot of bush work.. |
| 19:02.08 | SpaceBass | Qwell universial loader? |
| 19:02.10 | hardwire | long flights over water |
| 19:02.11 | mutilator | doing? |
| 19:02.17 | Qwell | SpaceBass: yeah, check cisco.com |
| 19:02.18 | hardwire | exactly what you want it looks like |
| 19:02.28 | SpaceBass | Qwell drat... no cco access yet... |
| 19:02.31 | hardwire | wireless administaration of hyperlink items.. custom linux wireless bridges |
| 19:02.34 | hardwire | network topology changes |
| 19:02.38 | cursor | space: where did you get your SIP image? |
| 19:02.40 | hardwire | starband and sat |
| 19:02.49 | hardwire | giong to st paul island AK |
| 19:02.51 | hardwire | as well as dutch harbor |
| 19:02.56 | Beirdo | hardwire: don't forget... scaring wildlife |
| 19:02.59 | hardwire | indeed |
| 19:03.04 | hardwire | but thats not part of the job |
| 19:03.06 | hardwire | I opt not to scare |
| 19:03.11 | Beirdo | :) |
| 19:03.17 | hardwire | but its not a very uhm.. beautifull job |
| 19:03.23 | mutilator | whys that |
| 19:03.24 | SpaceBass | I have purchased smartnet on the phones... 2 months ago... but its still not activated |
| 19:03.31 | hardwire | I have to do a lot of makeup on whatever I work on |
| 19:03.35 | hardwire | I typically have to pain things all the time |
| 19:03.37 | hardwire | de-rust them |
| 19:03.44 | Qwell | SpaceBass: msg me later... |
| 19:03.47 | SpaceBass | Qwell any way to do it with out the universial loader? Ive never had a problem later |
| 19:03.48 | SpaceBass | ok |
| 19:03.54 | Qwell | SpaceBass: I'll send you my configs and stuff |
| 19:03.55 | SpaceBass | s/later/before |
| 19:04.20 | *** join/#asterisk JerJer (~JerJer@jerjer.bronze.supporter.pdpc) |
| 19:04.28 | blitzrage | JerJer: zup |
| 19:04.42 | Qwell | DarthClue: if it doesn't get posted by the time I'll get back, I'll get on the bribe wagon |
| 19:04.49 | JerJer | Global crossing is experiencing what seems to be a random call setup problems today |
| 19:04.56 | blitzrage | Beirdo: I'm in Toronto too (well - Oakville, then moving to Mississauga) |
| 19:05.03 | Strom_C | I can't remember where I put my screwdriver |
| 19:05.14 | DarthClue | Strom_C: check the blender? |
| 19:05.18 | Beirdo | blitzrage: getting closer to the centre of the universe bit by bit :) |
| 19:05.45 | JerJer | like one of their switches doesn't even know about our toll-free numbers any more |
| 19:06.01 | *** part/#asterisk JerJer (~JerJer@jerjer.bronze.supporter.pdpc) |
| 19:06.55 | Madkiss | Is some german user with Freenet as VoIP-provider here? |
| 19:07.20 | blitzrage | Beirdo: lol - you say that too eh? (centre of the universe :)) |
| 19:07.35 | Beirdo | is anyone aware of an asterisk-friendly VoIP provider with Puerto Rico DIDs? |
| 19:07.46 | Beirdo | blitzrage: yeah, grew up in Parry Sound... :) |
| 19:07.50 | *** join/#asterisk jdg (~jdg@CA03F894.adsl.mana.pf) |
| 19:07.57 | Darwin35 | WARNING[6425] chan_sip.c: sip_xmit of 0x86b2e1c (len 451) to 10.0.0.2 returned -1: Address family not supported by protocol |
| 19:08.10 | yaaar | is it possible to set the caller id on a PRI? or am i stuck with callerid==the number assigned to the pri? |
| 19:08.12 | Beirdo | don't blame me for Toronto's arrogance |
| 19:08.41 | DarthClue | yaaar: it depends on if your pri provider supports it. |
| 19:08.45 | yaaar | hrm |
| 19:09.13 | yaaar | i can imagine the conversation already |
| 19:09.14 | DarthClue | yaaar: your pri provider. |
| 19:09.24 | yaaar | yeah, no, i got that part.... |
| 19:09.51 | DarthClue | yaaar: calling your boss and telling him you are subverting the system and using a spare pri is probably not a good idea though. |
| 19:10.15 | *** part/#asterisk jdg (~jdg@CA03F894.adsl.mana.pf) |
| 19:11.01 | *** join/#asterisk Ayano (~erik_leee@adsl-70-245-190-94.dsl.spfdmo.swbell.net) |
| 19:11.51 | *** join/#asterisk jeffik (~Jeff@CPE00c049565af7-CM0012256ead9e.cpe.net.cable.rogers.com) |
| 19:11.58 | cj | how do I set up a mysql data source for asterisk? |
| 19:12.08 | jeffik | anybody using sixtel? |
| 19:12.17 | cursor | no |
| 19:12.45 | cursor | call sixtel and ask for subscriber numbers |
| 19:12.51 | DarthClue | jeffik: why? |
| 19:12.53 | yaaar | the question is who on earth at centurytel will know whether i can set the callerid |
| 19:13.07 | yaaar | DarthClue: oh, and my boss is well aware that i'm planning on stealing the pri |
| 19:13.20 | DarthClue | yaaar: either an account manager or a tech. |
| 19:13.49 | yaaar | he actually called me today and said "we need to cancel the last pri in the modem pool...it's not being utilized" and i said "why don't we plug it into the * box?" |
| 19:13.57 | jeffik | Darth: well my regular provider got out of the business and i fell back to them and now no outgoing calls to NYC |
| 19:14.00 | DarthClue | yaaar: good save |
| 19:14.09 | jeffik | and they haven't updated any open trouble tickets in weeks |
| 19:14.26 | DarthClue | jeffik: can i /msg you? |
| 19:14.53 | DarthClue | jefik: is it a toll free? |
| 19:15.36 | jeffik | Darth, all i need is outbound |
| 19:15.55 | jeffik | Darth: US/Canada and some easten european coungtries |
| 19:17.04 | cursor | jeffik: Most SIP/IAX providers will offer you that |
| 19:18.01 | DarthClue | jeffik: ok, we only offer US48 presently. |
| 19:20.02 | cursor | Nothing interesting in the news today |
| 19:20.03 | cursor | hmmm |
| 19:20.09 | *** join/#asterisk tuxinator_linuxM (~spabin@ip68-109-146-168.ph.ph.cox.net) |
| 19:20.34 | *** join/#asterisk wizhippo (~wizhippo@Quebec-HSE-ppp233869.qc.sympatico.ca) |
| 19:20.48 | file | it's tuxinator_linuxM1 |
| 19:21.03 | cursor | M5 |
| 19:21.21 | file | pfft 5 |
| 19:21.28 | cursor | :-) |
| 19:22.23 | jeffik | Beirdo: why the sigh? |
| 19:22.40 | Beirdo | one of those days |
| 19:22.52 | Beirdo | heh |
| 19:23.03 | cursor | Midweek crisis |
| 19:23.19 | file | it's Thursday |
| 19:23.22 | file | Wednesday was midweek. |
| 19:23.27 | Beirdo | a case of the Thursdays, or something |
| 19:24.03 | Strom_C | This must be Thursday. I never could get the hang of Thursdays. |
| 19:24.17 | file | ~thursday |
| 19:24.17 | jbot | "This must be Thursday. I could never get the hang of Thursdays." (Arthur Dent) |
| 19:24.25 | Beirdo | so I guess I'll just drop an IAXy in PR while I continue to search for a DID provider down there :) |
| 19:24.25 | file | :) |
| 19:24.42 | Strom_C | I still can't find my goddamned Phillips screwdriver |
| 19:24.59 | cursor | Did you check down the back of the sofa? |
| 19:25.04 | *** join/#asterisk avidal45679 (~avidal@154.Red-80-38-51.pooles.rima-tde.net) |
| 19:25.06 | Beirdo | Strom_C: now that IS a dilemma |
| 19:25.53 | cursor | Dial(emma) |
| 19:26.02 | Strom_C | quite definitely not down the back of the sofa, as the sofa is not against the wall at the moment |
| 19:26.07 | Beirdo | heh |
| 19:26.29 | Beirdo | my phillips screwdrivers always go on unauthorized road trips |
| 19:26.43 | cursor | AWOL |
| 19:27.00 | Beirdo | yup |
| 19:27.06 | cursor | If you offered them more holidays, they wouldn't need to go AWOL :-) |
| 19:27.10 | Beirdo | and always show up after I buy a replacement |
| 19:27.26 | *** join/#asterisk mrgoby (~mrgoby@aa.linuxbox.com) |
| 19:27.58 | Strom_C | I've been trying to think my way through locating it to no avail. The last thing I used it for was mounting the payphones, and it's nowhere near the payphones. |
| 19:28.13 | Beirdo | payphones? |
| 19:28.14 | Beirdo | hehehe |
| 19:28.20 | file[laptop] | check your pants |
| 19:28.30 | Beirdo | do you have asterisk doing coin tone detection? |
| 19:28.32 | cursor | yes - check your pants - if you've been mounting things |
| 19:28.48 | *** join/#asterisk trig (~jb@xob.neospire.net) |
| 19:28.53 | Strom_C | Beirdo: not yet |
| 19:29.00 | Beirdo | that would be so cool |
| 19:29.01 | cursor | Beirdo: rate table |
| 19:29.08 | Strom_C | cursor: I already tried the "the pants I wore yesterday" trick |
| 19:29.10 | Strom_C | didnt work |
| 19:29.14 | Madkiss | Shouldn't "exten => _9.,1,Dial(SIP/$EXTEN:1@sipgate,60)" make all calls that start with a 9 go out via "sipgate"? |
| 19:29.26 | Beirdo | especially if you have kids... teenagers that will have to pay for calls. :) |
| 19:30.15 | Beirdo | of course, this is a man whose CDRs indicate 4011min of usage so far this month |
| 19:30.23 | Madkiss | ah, I see, ah |
| 19:30.39 | cursor | Madkiss: ${EXTEN:1} |
| 19:31.02 | Beirdo | I can't believe I've averaged 4.75h/day on the phone |
| 19:31.11 | Beirdo | unfrigging believable |
| 19:31.12 | cj | how do I stop safe_asterisk ? |
| 19:31.24 | cursor | Asterisk cannot be stopped |
| 19:31.29 | cj | heh |
| 19:31.30 | Holos | Does anyone have Auto-Answer working on Polycom phones? I'm having a problem getting it to work.. |
| 19:32.11 | cj | anyone have a real answer? I'd hate to kill -9 it ;) |
| 19:32.28 | file[laptop] | I'm on the phone aboot 5-6 hours a day |
| 19:32.44 | cpatry | just kill -9 ur safe_asterisk |
| 19:32.48 | cpatry | it wont kill asterisk |
| 19:33.04 | cj | cpatry: is there a nicer way to do it? |
| 19:33.20 | cpatry | not that i know. |
| 19:33.29 | Corydon-w | If Asterisk is shut down normally, safe_asterisk will quit |
| 19:33.30 | cpatry | whats wrong with kill -9 pid? |
| 19:33.44 | cursor | /etc/init.d/asterisk stop |
| 19:33.49 | mrgoby | asterisk -rx "stop now" |
| 19:33.53 | cj | cursor: no workie |
| 19:33.57 | cj | mrgoby: thanks |
| 19:33.57 | cpatry | Corydon-w: but he doesnt want to kill asterisk i think. |
| 19:34.01 | Corydon-w | Only when Asterisk shuts down abnormally does safe_asterisk restart it |
| 19:34.01 | cpatry | just the safe_asterisk |
| 19:34.06 | mutilator | safe_asterisk didn't seem to work correctly |
| 19:34.17 | cpatry | safe_asterisk works fine here. |
| 19:34.23 | cj | cpatry: I figured asterisk might have a shutdown process it would prefer to use rather than coming to a screaching halt |
| 19:34.47 | Corydon-w | cj: asterisk -rx 'stop now' |
| 19:34.49 | mrgoby | it does, login to the cli and stop it from there... the best way i know |
| 19:34.49 | cpatry | asterisk has one, safe_asterisk doesnt have one. |
| 19:35.10 | mrgoby | or do it from bash with the -x option |
| 19:36.25 | tzafrir | asterisk is a daemon. And like all daemons, started and stopped by an init.d script |
| 19:36.43 | cursor | unless they are started manually |
| 19:36.47 | Strom_C | http://www.stromcarlson.com/misc/decorate_by_phone_2.jpg |
| 19:36.55 | *** join/#asterisk ast_freak (~jesse@hades-out.universalsystems.net) |
| 19:36.55 | hardwire | coming up with a dial-in who answers what dialplan sure stinks |
| 19:37.04 | *** join/#asterisk ZeeLax (1000@125-143.dialup.itte.kz) |
| 19:37.14 | hardwire | Strom_C: stealing payphones? |
| 19:37.18 | hardwire | thats a crime yop |
| 19:37.19 | Strom_C | stealing? |
| 19:37.24 | Strom_C | I bought those |
| 19:37.25 | hardwire | crime crime crime |
| 19:37.29 | hardwire | I am sending the popo |
| 19:37.31 | cursor | Your phone sign shows that you didn't find that screwdriver :-) |
| 19:37.38 | hardwire | actually.. I wanted to put a payphone in the kitchen |
| 19:37.44 | hardwire | w/ a speaker in it |
| 19:37.53 | hardwire | so I can dial and have it tune into a streaming station :) |
| 19:37.58 | Strom_C | heh |
| 19:38.07 | Strom_C | music over ulaw isn't the greatest |
| 19:38.17 | cj | res_odbc is not listed in modules.conf... why does the log say it's registed database handle ? |
| 19:38.23 | hardwire | a company in colroado wanted me to retrofit standard payphone shells for VoIP |
| 19:38.25 | hardwire | wireless VoIP |
| 19:38.27 | cursor | Why would anyone use one of those payphones when there's an ordinary phone on a table next to them? |
| 19:38.28 | hardwire | ugh |
| 19:38.33 | hardwire | that would have sucked the monkey. |
| 19:38.43 | Strom_C | cursor: because they're afraid of using a rotary dial |
| 19:38.53 | cursor | haha |
| 19:39.25 | cursor | Well, I'm convinced. I need three payphones in my hallway as well |
| 19:40.02 | Strom_C | hah |
| 19:40.33 | tzafrir | cursor, well, I don't expect you to be at your server to restart it in case of a power failiure, would you? |
| 19:40.53 | tzafrir | And besides, you need four |
| 19:41.10 | tzafrir | because I'll "get" one of them |
| 19:41.17 | cursor | I like it. A box of beer with empty bottles in it. Under that's there's the "extra" box |
| 19:41.21 | cursor | what forethought |
| 19:41.37 | Beirdo | Strom_C: nice :) |
| 19:42.11 | Strom_C | hehe, thanks :D |
| 19:42.18 | cursor | tzafrir: My servers will restart themselves when the power is back up |
| 19:42.21 | Beirdo | you are a true phone geek |
| 19:42.23 | Beirdo | :) |
| 19:42.56 | Strom_C | i might mount my bell system hard hat somewhere in that corner as well |
| 19:43.13 | Beirdo | heh |
| 19:43.20 | tzafrir | cursor, in interesting test for that: |
| 19:43.23 | cursor | I might mount a payphone in place of a door bell |
| 19:43.26 | wwh | Question on clock source in /etc/zaptel.conf for T1 cards. Do I set the clock source to 0 to provide clock to the network and 1 to get time FROM the network? |
| 19:43.36 | cursor | Let them call me instead of ringing the bell |
| 19:43.59 | Strom_C | cursor: that would be cool |
| 19:44.08 | Strom_C | "INSTRUCTIONS - Pick up phone, dial 0" |
| 19:44.10 | tzafrir | run 'init 1' . Did asterisk stop? then run 'init 3' (or init 5, or 2, depends on the system), did asterisk restart? |
| 19:44.21 | cursor | One of my servers is called hyperion |
| 19:44.44 | Strom_C | speaking of which, can you do ringdowns with zaptel cards? |
| 19:44.53 | *** part/#asterisk bdunn (~bwdunn@c-24-0-49-250.hsd1.tx.comcast.net) |
| 19:44.57 | Strom_C | that would work better, i think :) |
| 19:45.23 | cursor | Well, not for telephony |
| 19:45.30 | cursor | I have one as a timer |
| 19:46.03 | cursor | Those interested would read the notice on the website |
| 19:49.21 | *** part/#asterisk jeffik (~Jeff@CPE00c049565af7-CM0012256ead9e.cpe.net.cable.rogers.com) |
| 19:49.52 | *** join/#asterisk eKo1 (~bernd@metrored-gw.tropicohn.com) |
| 19:52.19 | *** join/#asterisk SarahEmm (~sarahemm_@MTL-ppp-159032.qc.sympatico.ca) |
| 19:52.29 | SarahEmm | mewmew |
| 19:52.50 | SarahEmm | sivana: you 'round? |
| 19:52.54 | SarahEmm | slePP: you 'round? ;) |
| 19:53.07 | Katty | mew |
| 19:53.46 | *** join/#asterisk pigpen (~mark@fw.seamans.cc) |
| 19:54.00 | cursor | cyber-tooth |
| 19:54.48 | eKo1 | that too |
| 19:55.34 | *** join/#asterisk MrBelvedr (~tt@ip68-227-218-250.dc.dc.cox.net) |
| 19:56.09 | Katty | moo |
| 19:56.13 | SarahEmm | moooo |
| 19:56.15 | SarahEmm | *hoots* |
| 19:56.17 | sivana | yes |
| 19:56.19 | sivana | sorry |
| 19:56.21 | sivana | I'm here |
| 19:56.25 | SarahEmm | can i msg? |
| 19:56.27 | sivana | sure |
| 19:56.58 | *** join/#asterisk TripleFFF2sdf (~TripleFFF@modemcable131.156-131-66.mc.videotron.ca) |
| 19:57.10 | blitzrage | moo urns |
| 19:57.12 | Beirdo | SarahEmm: http://pics.beirdo.ca/RandomPics/DSC_2752 |
| 19:57.13 | OloBola | for voice recognition, why not just record a wav and pass it to a m$ box running speech sdk and grammars? The grammars should narrow it down enough to get an accurate read, I would guess. |
| 19:58.37 | iCEBrkr | OloBola: Shhhh about voice recognition.. I've been hacking away at EAGI stuff for a few days now. and still nothing. |
| 19:58.41 | iCEBrkr | >:( |
| 19:58.49 | SarahEmm | if i could get good voice recognition and a good synth, i could forget about using BRS ;) |
| 19:58.53 | SarahEmm | somehow i think that's unlikely right now tho |
| 19:58.55 | Katty | moo bile |
| 19:59.05 | iCEBrkr | SarahEmm: Sphinx works ok. |
| 19:59.26 | Katty | hmm |
| 19:59.33 | SarahEmm | iCEBrkr: for what kind of recognition? |
| 19:59.46 | iCEBrkr | At least I had it working stand-alone on my linux box and crappy mic. |
| 19:59.56 | iCEBrkr | SarahEmm: Simple stuff. Yes, no, left, right, up down, 1 2 3 4 |
| 20:00.09 | SarahEmm | yeah. |
| 20:00.12 | iCEBrkr | I haven't found one that does dictation good. |
| 20:00.15 | SarahEmm | that couldn't be used for a relay system ;) |
| 20:00.34 | iCEBrkr | SarahEmm: I'm jumping in this mid-conversation. I have no idea what you guys are talking about :D |
| 20:01.08 | SarahEmm | guys? |
| 20:01.10 | SarahEmm | just me *giggle* |
| 20:01.11 | OloBola | iCEBrkr: speech SDK 5.1 chokes a little on asterisk wav files. The same audio works perfectly directly to the engine though. |
| 20:01.26 | SarahEmm | i was just saying if i could have good speech recognition, i could build a completely automated simple relay system |
| 20:01.30 | SarahEmm | but no such thing exists heh |
| 20:01.31 | iCEBrkr | SarahEmm: Whatever, you're just a guy with long hair. |
| 20:01.43 | SarahEmm | *sigh* |
| 20:01.43 | SarahEmm | thanks. |
| 20:01.44 | SarahEmm | :P |
| 20:01.46 | iCEBrkr | HEHE |
| 20:01.54 | Beirdo | I used to have long hair |
| 20:01.56 | Beirdo | hehe |
| 20:01.59 | iCEBrkr | SarahEmm: Sorry, had to barrow that quote from Eurotrip. |
| 20:02.38 | SarahEmm | iCEBrkr: uhh.. huh? |
| 20:02.49 | iCEBrkr | SarahEmm: Obviously you never saw Eurotrip. |
| 20:03.00 | iCEBrkr | LOL |
| 20:03.05 | iCEBrkr | Me? Troll? |
| 20:03.07 | iCEBrkr | Naaaaaaaaaa |
| 20:03.12 | SarahEmm | *confused* |
| 20:03.17 | iCEBrkr | No seriously.. In the movie Eurotrip. |
| 20:03.22 | Beirdo | ignore the troll :) |
| 20:03.25 | Beirdo | heh |
| 20:03.41 | Beirdo | SarahEmm: did you see that picture I pasted to ya? |
| 20:03.45 | SarahEmm | err.. picture? |
| 20:03.49 | iCEBrkr | anyhow. |
| 20:03.49 | Beirdo | http://pics.beirdo.ca/RandomPics/DSC_2752 |
| 20:03.53 | Beirdo | :) |
| 20:03.56 | *** join/#asterisk dr123 (~asdf@12-202-51-38.client.insightBB.com) |
| 20:04.12 | SarahEmm | err... it's distilling.. ?? |
| 20:04.15 | SarahEmm | what about it? |
| 20:04.17 | Beirdo | yes |
| 20:04.19 | Beirdo | on my TV |
| 20:04.20 | dr123 | I just got a 7905 and a 7912 can someone please dcc me the sip firmware? |
| 20:04.25 | SarahEmm | ooh |
| 20:04.26 | SarahEmm | coolies |
| 20:04.27 | Beirdo | using mythgame |
| 20:04.29 | Beirdo | :) |
| 20:04.38 | iCEBrkr | There's a part in the movie Eurotrip that one of the 2 guyfriends this chick has says "You're not a girl, you're just a guy with long hair" meaning they're such good friends he'd never look at her as more than just that. |
| 20:04.42 | iCEBrkr | No fun when you have to explain the jokes |
| 20:04.49 | SarahEmm | iCEBrkr: oh. |
| 20:04.57 | SarahEmm | iCEBrkr: i thought you were bugging me about being trans. heh. *sigh* |
| 20:05.02 | SarahEmm | Beirdo: nice! |
| 20:05.14 | iCEBrkr | SarahEmm: Pffft, Please. I got better things to do. :D |
| 20:05.20 | iCEBrkr | but now that you mention it. |
| 20:05.23 | iCEBrkr | >:) |
| 20:05.29 | Beirdo | it was playable other than the mouse on the IR keyboard sucking large quantities... |
| 20:05.44 | cursor | I haven't bothered with MythGame yet |
| 20:05.44 | Beirdo | I think I'll have to hook up an RF mouse to the PVR too :) |
| 20:05.45 | SarahEmm | iCEBrkr: lol. |
| 20:05.53 | Hmmhesays | sweet geebus what happened to my fop buttons |
| 20:05.57 | SarahEmm | iCEBrkr: most days it wouldn't bother me. today is being rough on me. |
| 20:06.04 | cursor | I'll give MythPhone a whirl one day |
| 20:06.06 | iCEBrkr | SarahEmm: :( |
| 20:06.19 | Beirdo | oh, and I couldn't get it to quit as I had no windowbar (running ratpoison) |
| 20:06.33 | Beirdo | cursor: I tried it, it was unusable for me :) |
| 20:06.48 | Beirdo | so I moved on |
| 20:06.52 | cursor | I'll give MythGame a miss then :-) |
| 20:07.04 | Beirdo | well, it's puzzlepirates in particular |
| 20:07.12 | cursor | At least my MythTV shows me a caller ID window when people interrupt me |
| 20:07.13 | Beirdo | it has no "quit the game" button |
| 20:07.33 | Beirdo | but Ctrl-Alt-Backspace did wonders |
| 20:07.34 | cursor | Well, when people try to interrupt me |
| 20:07.50 | *** join/#asterisk clive- (~pirch@rrba-146-104-189.telkomadsl.co.za) |
| 20:07.53 | Hmmhesays | they are all tiny now |
| 20:08.12 | cursor | I don't have a keyboard plugged into my Myth frontend |
| 20:08.38 | Beirdo | that would make playing games a bit tough when you need the keyboard :) |
| 20:08.50 | cursor | :-) |
| 20:09.00 | cursor | I assumed the games would work using a remote |
| 20:09.08 | cursor | like using the direction keys etc. |
| 20:09.10 | tzafrir | I tried ion for a while. but there are certain things for which you need a rat. surfing, for instance |
| 20:09.17 | yaaar | Beirdo: you could probably have just used atl-f4 to kill the window instead of dropping the whole x session |
| 20:09.24 | PatrickDK | hmm, I don't use anyting on my mythtv box |
| 20:09.29 | cursor | a rat would down if you took it surfing |
| 20:09.35 | PatrickDK | no keyboard, remote, monitor |
| 20:09.37 | Beirdo | yaaar: don't think that works in ratpoison |
| 20:09.38 | cursor | or can those critters swim |
| 20:09.44 | yaaar | bunk |
| 20:09.53 | yaaar | cursor: they can swim for a while |
| 20:10.30 | cursor | I'll test it by dumping one in the middle of the Atlantic |
| 20:10.42 | tzafrir | currently using icewm |
| 20:12.42 | *** join/#asterisk Tenkawa (~Tenkawa@Tenkawa.user) |
| 20:12.48 | iCEBrkr | Is is 5pm yet?! |
| 20:12.53 | iCEBrkr | is it even |
| 20:12.58 | Tenkawa | is there any way to easily test a zaptel card is functioning? |
| 20:13.04 | iCEBrkr | cursor: watch the toes! |
| 20:13.05 | cursor | 9:13pm |
| 20:13.22 | iCEBrkr | Tenkawa: Dial out? |
| 20:13.31 | Tenkawa | iCEBrkr: not got it configured yet |
| 20:13.36 | iCEBrkr | hehe |
| 20:13.39 | Tenkawa | just installed the card |
| 20:13.42 | *** join/#asterisk pbxbart (~pbx111@p54B00FCA.dip0.t-ipconnect.de) |
| 20:13.51 | iCEBrkr | Tenkawa: Well it'll spew errors if the modules don't load. |
| 20:13.56 | pbxbart | -DBUSYDETECT_MARTIN -Wno-missing-prototypes -Wno-missing-declarations -DZAPATA_PRI -DIAX_TRUNKING -DCRYPTO -fPIC -c -o chan_sip.o chan_sip.c |
| 20:13.56 | pbxbart | chan_sip.c:9299: internal compiler error: output_operand: invalid expression as operand |
| 20:13.56 | Tenkawa | true |
| 20:13.58 | iCEBrkr | Tenkawa: and you can look at dmesg |
| 20:14.06 | pbxbart | anyone seen this befon in 1.0.9 ? |
| 20:14.08 | Tenkawa | it did say registered a zaptela no character node 196 |
| 20:14.14 | Tenkawa | er on |
| 20:14.23 | iCEBrkr | Tenkawa: that's a good start. |
| 20:15.23 | Tenkawa | didnt realize that it had a phone out oon it too |
| 20:15.26 | Tenkawa | kinda nice |
| 20:15.27 | *** join/#asterisk udfc (~AlanBunch@216-206-23-226.dia.cust.qwest.net) |
| 20:15.47 | Tenkawa | of course my bios is pissed off at it |
| 20:16.42 | iCEBrkr | I'm still debating if I want to get a land-line for my Asterisk box. |
| 20:16.59 | iCEBrkr | I got the cheap-o x100p card in there. |
| 20:17.08 | eKo1 | as oposed to wireless? |
| 20:17.17 | iCEBrkr | eKo1: straight voip. |
| 20:17.23 | eKo1 | ah... |
| 20:17.30 | iCEBrkr | eKo1: Since even my local calls go out via voicepulse. |
| 20:17.39 | udfc | can i ask an aah question ? |
| 20:17.54 | iCEBrkr | udfc: say please. |
| 20:18.00 | iCEBrkr | :D |
| 20:18.19 | udfc | aah installed and working with 3 polycom phones ... |
| 20:18.20 | iCEBrkr | 45mins until Beer time. I gotta stop watching the clock. This will take forever. |
| 20:18.31 | iCEBrkr | Um, what is 'aah'? |
| 20:18.40 | SarahEmm | Asterisk @Home |
| 20:18.47 | iCEBrkr | Other than the sound I make after I piss. :D |
| 20:18.50 | udfc | configuring inbound fax, fax machine on Zap/1 configured as ext 2310 |
| 20:18.56 | Hmmhesays | it's that sound you make after a huge meal |
| 20:18.57 | SpaceBass | Qwell you around? |
| 20:19.12 | iCEBrkr | udfc: ok, what's not working? |
| 20:19.27 | udfc | inbound call answers and tried to hit Zap/2310 and "== Everyone is busy/congested at this time" |
| 20:19.41 | udfc | needless to say the fax machine is not offhook |
| 20:20.03 | udfc | 666 from a softphone works ... |
| 20:20.19 | udfc | dial 2310 from the softphone works ... |
| 20:20.28 | iCEBrkr | I'm not familiar with Asterisk @home, but I'm assuming you can get into asterisk -r CLI |
| 20:20.33 | udfc | yes |
| 20:20.40 | iCEBrkr | set verbose 4 |
| 20:20.44 | *** join/#asterisk meppl (~mephisto@A7d28.a.pppool.de) |
| 20:20.45 | udfc | ok |
| 20:21.00 | iCEBrkr | I'm thinking your inbound context is hosed some how |
| 20:21.33 | udfc | i see the call hit the inbound trunk and it answer s the call |
| 20:21.34 | iCEBrkr | and it wouldn't be zap/2310 it'd be sip/2310.. |
| 20:21.41 | iCEBrkr | At least in my configuration is it. |
| 20:21.47 | iCEBrkr | it is... |
| 20:21.55 | udfc | nope i have a zap card |
| 20:21.56 | iCEBrkr | So it gets to 's'? |
| 20:22.05 | iCEBrkr | udfc: So? I have a zap card too. |
| 20:22.28 | iCEBrkr | You're taking the inbound call and trying to 'deliver' it somewhere else right? |
| 20:22.34 | udfc | yes |
| 20:22.43 | *** join/#asterisk miguel3239 (~myoung@h-68-167-124-170.cmbrmaor.covad.net) |
| 20:22.58 | iCEBrkr | [inbound-fwd] |
| 20:22.58 | iCEBrkr | exten => 47191,1,Ringing |
| 20:22.58 | iCEBrkr | exten => 47191,2,Answer |
| 20:22.58 | iCEBrkr | exten => 47191,3,Dial(SIP/2101&SIP/2104,25,tr) |
| 20:23.06 | iCEBrkr | That's a little different, but. you get the idea. |
| 20:23.28 | udfc | would a log snippet help ? |
| 20:23.43 | iCEBrkr | Your polycoms aren't using zaptel 'technology' |
| 20:23.46 | iCEBrkr | they're using SIP |
| 20:24.07 | udfc | true, im not having a problem on the sip side, just with the fax machine |
| 20:25.01 | iCEBrkr | I've only tinkered with fax stuff. |
| 20:25.03 | iCEBrkr | Never got it working |
| 20:25.28 | iCEBrkr | But there's a 'fax' extension if you're using... oh hell I forget. |
| 20:25.59 | udfc | if I set the config file manualy to Zap/1 for the fax ext it at least bridges the channels |
| 20:26.33 | udfc | when the aah database thingy creates the config files and uses Zap/2310 |
| 20:26.40 | udfc | i get congestion |
| 20:26.41 | Tenkawa | hmm |
| 20:27.06 | iCEBrkr | udfc: What are you using for you 'zap' device? |
| 20:27.20 | udfc | how do you mean |
| 20:27.42 | *** join/#asterisk shido6 (~greg@d221-68-209.commercial.cgocable.net) |
| 20:27.58 | hardwire | http://bogomip.com/~hardwire/vehix.jpg |
| 20:28.00 | hardwire | I really want that |
| 20:28.04 | hardwire | think I can convert it to VoIP? |
| 20:28.05 | iCEBrkr | FXO/FXS |
| 20:28.19 | iCEBrkr | udfc: you have something to connect your asterisk box to PSTN, rihgt? |
| 20:28.21 | iCEBrkr | right |
| 20:28.25 | udfc | yes |
| 20:28.25 | *** join/#asterisk dack (~dack@S0106000f664f0871.vc.shawcable.net) |
| 20:28.32 | udfc | the four port digium cards |
| 20:28.36 | cursor | Who's tractor is that? |
| 20:28.42 | udfc | 1 card with fxs 1 card for fxo |
| 20:29.25 | iCEBrkr | udfc: See. when you do a Dial(Zap/1/blahblahblhablh) it's attempting to dial out of that device. |
| 20:29.28 | hardwire | cursor: heh |
| 20:29.44 | iCEBrkr | I don't see how directing an inbound call back to your zaptel device is gonna work |
| 20:30.05 | iCEBrkr | Then again, I configure Asterisk with all trial and error.. :D |
| 20:30.36 | udfc | yes, im taking the call on zap/7, the inbound CO line and sending to zap/1 the analog fax machine |
| 20:30.46 | iCEBrkr | Oh! Duh! |
| 20:30.48 | Tenkawa | hmm |
| 20:30.50 | udfc | just as i would if i was using a analog desk phone |
| 20:30.51 | iCEBrkr | I knew that...</sarcasm> |
| 20:31.04 | dack | Can someone explain this behavior: I have a context with "exten => _555,1,Playback(beep)" and "exten => _.,1,Playback(invalid)" dial a single 5 immediately (no |
| 20:31.07 | dack | waiting for DigitTimeout) |
| 20:31.08 | udfc | i counld tell it was a test for me 8-) |
| 20:31.21 | *** join/#asterisk santiago (~santiago@63.245.86.98) |
| 20:31.22 | Tenkawa | I'm getting uable to open master device /dev/zap/ctl when I try to modprobe wcfxo :( |
| 20:31.45 | SarahEmm | does it exist Tenkawa? |
| 20:31.46 | Madkiss | What's wrong if the dialtone on my 7960 (connected to *) does not sound like the "normal" one? |
| 20:31.50 | Tenkawa | SarahEmm: yeah |
| 20:31.50 | tzafrir | Tenkawa, what kernel version? |
| 20:32.03 | Tenkawa | ahh crap |
| 20:32.06 | Tenkawa | I'm running udev |
| 20:32.06 | Strom_C | Madkiss: what /does/ it sound like? |
| 20:32.23 | *** join/#asterisk mxmasster (~maxc@pitbull.media.net) |
| 20:32.25 | mxmasster | hi all |
| 20:32.27 | Madkiss | Strom_C: well, it's not that loud, and it sounds not very strong |
| 20:32.44 | mxmasster | i'm looking for a good way to store countrycodes/prefixes in a mysql database for an lcr application |
| 20:32.45 | Tenkawa | tzafrir: 2.6.11 |
| 20:32.52 | Strom_C | Madkiss: you try turning the volume up? |
| 20:33.06 | mxmasster | is there a standard db format i should use, or just store the first x digits based on the rate? |
| 20:33.14 | tzafrir | Tenkawa, well, I was going to see if it made sense to ask about udev... |
| 20:33.18 | Tenkawa | heheh |
| 20:33.26 | Tenkawa | yeah.. reading entres I need to make now |
| 20:33.29 | dack | ugh, that made no sense... lets try that again. |
| 20:33.36 | eKo1 | mxmasster: i store the first x digits based on the rate |
| 20:33.51 | *** join/#asterisk xlyz (~xl@213-140-17-96.fastres.net) |
| 20:34.02 | *** part/#asterisk xlyz (~xl@213-140-17-96.fastres.net) |
| 20:34.03 | eKo1 | that way, i can index that column and get the rates quickly |
| 20:34.10 | dack | Can someone explain this behavior: I have a context with "exten => _555,1,Playback(beep)" and "exten => _X,1,Playback(invalid)". Dialing a single 5 says invalid immediately (no waiting for DigitTimeout) or giving the opportunity to dial 2 more 5's. |
| 20:34.36 | mxmasster | eKo1: doesn't that require a select * from db where prefix like? |
| 20:34.56 | mxmasster | wait... that doesn't make sense |
| 20:35.03 | Madkiss | Strom_C: no |
| 20:35.07 | mxmasster | you'd have to do a select based on the country code and work from there right? |
| 20:35.16 | Madkiss | Strom_C: I want the normal dialtone even on the SIP-thing |
| 20:35.45 | mxmasster | eKo1: is that what you are doing |
| 20:36.19 | *** join/#asterisk asterisk99 (~chatzilla@modemcable111.209-131-66.mc.videotron.ca) |
| 20:36.19 | Tenkawa | rebooting box now |
| 20:37.08 | *** join/#asterisk wizhippo (~wizhippo@Quebec-HSE-ppp233869.qc.sympatico.ca) |
| 20:37.46 | Tenkawa | still need to figure out wat this resource conflict my bios keeps griping about is about |
| 20:37.47 | Strom_C | Madkiss: my 7960 gives normal sounding dial tone |
| 20:37.59 | eKo1 | mxmasster: say what again? |
| 20:38.17 | Strom_C | if the only thing that sounds different is that it's too soft, try turning the volume up and see if that works |
| 20:38.36 | Madkiss | Strom_C: Well, where do you live? ;) |
| 20:38.43 | Tenkawa | well close |
| 20:38.44 | Tenkawa | r |
| 20:38.57 | Tenkawa | nw telling me channel config failed |
| 20:39.05 | mxmasster | eKo1: curious about the db query... if a person is dialing 18005551212, how do you generate the match? select '1%' from the database and do it in the agi, or keep selecting from the db until there is a match? |
| 20:39.33 | Strom_C | Madkiss: Los Angeles |
| 20:39.34 | *** join/#asterisk Exomorph (Exomorph@216.251.134.9) |
| 20:39.38 | Madkiss | Strom_C: uhm. |
| 20:39.48 | Madkiss | Strom_C: Well, maybe your definition of "normal" is different from mine? |
| 20:39.48 | Exomorph | Who here knows much about the meridian phones? We have a 7208 here that we want to pick up the active incoming call when you pick up up the phone. Anyone have any ideas? |
| 20:39.59 | asterisk99 | Has anyone here seen weird behaviour from the LEN() expression? e.g. LEN(xxx) just returns LEN(xxx) and not 3 like youo would expect |
| 20:40.00 | Strom_C | Madkiss: where are you? |
| 20:40.06 | Madkiss | Strom_C: Germany |
| 20:40.21 | eKo1 | well, say your column is called prefix, you will have something like 'where $number = prefix%' |
| 20:40.34 | Strom_C | as far as I was aware, all modern precise dial tone is a combination of 350hz and 440hz |
| 20:40.37 | Strom_C | sine wave |
| 20:41.23 | Strom_C | ah ok, your dial tone is just 425hz continuous |
| 20:41.44 | dack | shouldn't * wait for more digits or digittimeout if the extension is ambiguous? |
| 20:42.31 | Madkiss | Strom_C: So what do I do to "fix" my asterisk? |
| 20:42.52 | OloBola | Which format records the clearest? g723, g729, gsm, h263, ulaw, alaw, vox, wav |
| 20:42.57 | Tenkawa | ok well this is annoying |
| 20:43.07 | Strom_C | madkiss: I'm looking |
| 20:43.15 | *** join/#asterisk MustDie (~voip@205.247.13.59) |
| 20:43.18 | Strom_C | OloBola: ulaw |
| 20:43.24 | OloBola | thank you |
| 20:43.40 | brookshire | ulaw/alas |
| 20:43.43 | brookshire | alaw |
| 20:44.05 | OloBola | alaw is god? |
| 20:44.17 | mogorman | ulaw is god |
| 20:44.21 | brookshire | ulaw and alaw are both raw |
| 20:44.25 | mogorman | at least the american |
| 20:44.31 | mogorman | not quite brooks |
| 20:44.39 | brookshire | alaw is used more in europe |
| 20:44.43 | mogorman | ulaw and alaw are almost raw with a table |
| 20:44.47 | mogorman | sin_lin is raw |
| 20:45.00 | iCEBrkr | my ass is raw. |
| 20:45.09 | iCEBrkr | ow. ow. ow. |
| 20:45.11 | brookshire | i'm afraid to ask why |
| 20:45.13 | Strom_C | if you hit the PSTN though, linear is a waste of 64kbps |
| 20:45.17 | iCEBrkr | brookshire: :) |
| 20:45.55 | iCEBrkr | Strom_C: Yea cuz we all need 128bit/44k stereo sound for phone calls *jokes* |
| 20:46.00 | jsharp | We've secretly replaced iCEBrkr's toilet paper with 50 grit sand paper. Lets see if he notices. |
| 20:46.12 | Madkiss | Strom_C: any idea, maybe? |
| 20:46.26 | iCEBrkr | jsharp: Hey! you stay away from my toilet paper! That's sacred! |
| 20:46.38 | Strom_C | Madkiss: I'm still looking |
| 20:47.12 | udfc | can someone explain "Executing Dial("Zap/7-1", "ZAP/2310|20|d") in new stack" |
| 20:47.18 | mxmasster | eKo1: isn't that like search slow though? |
| 20:47.19 | udfc | i think i know but maybe i donw |
| 20:47.31 | iCEBrkr | udfc: it's dialing. |
| 20:47.44 | udfc | ok, that i know |
| 20:47.45 | Strom_C | Madkiss: what sip firnware version are you running? |
| 20:48.02 | jsharp | ZAp/2310? Zap channel 2310? |
| 20:48.05 | jsharp | Uh. |
| 20:48.06 | iCEBrkr | From Zap/7-1 to ZAP/2310 with a 20 second timeout |
| 20:48.13 | Madkiss | Strom_C: 7-4-0 |
| 20:48.21 | Strom_C | ok, same as me |
| 20:48.24 | udfc | the 2310 is the ext number |
| 20:48.34 | eKo1 | mxmasster: you would think so but no. just don't use regex |
| 20:48.55 | udfc | im guessing that needs to be a channel number |
| 20:49.00 | udfc | more like Zap/1 |
| 20:49.12 | miguel3239 | dack: http://www.voip-info.org/tiki-index.php?page=Asterisk+config+extensions.conf+sorting |
| 20:49.43 | iCEBrkr | udfc: I dunno, I never 'called' another zaptel device. |
| 20:49.54 | iCEBrkr | udfc: All I have are SIP devices. |
| 20:50.04 | udfc | how would you make an analog desk phone ring ? |
| 20:50.04 | iCEBrkr | or ATA devices. whichever. |
| 20:50.21 | udfc | ok, an ata |
| 20:50.22 | dack | miguel3239: i've read that already. this behaviour is not the same as described in the wiki. |
| 20:50.23 | iCEBrkr | udfc: Yea, I'd Dial(SIP/2101,20,tr) :D |
| 20:50.54 | mxmasster | eKo1: are you then populating your rate table based on your provider, or did you start out with a list? |
| 20:51.55 | miguel3239 | dack: You are doing pattern matching, correct? So, wouldn't it be the same idea? You are using _X instead of _. but it is pattern matching. Or I am I not understanding this? |
| 20:51.57 | dack | miguel3239: using their first example, I would never be able to dial anything other than a 1 digit extension. |
| 20:52.15 | dack | miguel3239: it doesn't wait for timeout when the match is ambiguous |
| 20:52.18 | cj | how do I disable res_odbc? |
| 20:52.35 | miguel3239 | dack: The first example is showing the problem... the second one is the solution |
| 20:52.48 | dack | miguel3239: i know, but the problem they show is not my problem. |
| 20:53.03 | cj | $ sudo grep res_odbc /etc/asterisk/* |
| 20:53.03 | cj | /etc/asterisk/modules.conf:;preload => res_odbc.so |
| 20:53.06 | miguel3239 | dack: sorry, I guess I am not following then |
| 20:53.25 | cj | so it doesn't look like I'm telling it to load... is it staticly linked? |
| 20:53.32 | dack | miguel3239: for example if I match the pattern "_918.", I can only dial a 4 digit extension starting with 918 |
| 20:53.48 | dack | no more digits than that, it goes right away |
| 20:53.58 | Madkiss | Strom_C: Do you think that stuff must be configured straight in the phone itself? |
| 20:54.06 | *** join/#asterisk razu (~razu@80-235-89-85-dsl.prn.estpak.ee) |
| 20:54.14 | eKo1 | mxmasster: there's a rate table for the providers and then there's my rate table. |
| 20:54.16 | miguel3239 | dack: right because it finds a match and immediately goes |
| 20:54.31 | mxmasster | eKo1: ? |
| 20:54.39 | dack | miguel3239: which is a big problem. |
| 20:54.57 | greg_work | dack: try _918XXXX |
| 20:55.04 | Strom_C | Madkiss: I don't see an option for it on the phone's menu; i'm telnetting into mine now to see what i can find |
| 20:55.06 | greg_work | or whatever # of digits you actually have |
| 20:55.24 | greg_work | if you have two patterns _918XX and _918XXXXXXX it should wait if you only dial a 5 digit number |
| 20:55.28 | dack | greg_work: that only works for a fixed number of digits |
| 20:55.34 | *** join/#asterisk kimosabe (~kimo@216.60.60.103) |
| 20:55.36 | greg_work | _918. not waiting sounds like a bug though? |
| 20:55.42 | Tenkawa | ooh |
| 20:55.45 | mxmasster | eKo1: you mean you have a table that lists your providers and connection information, and then you have a rate table with the prefixes and rates? |
| 20:55.50 | Tenkawa | resource conflict is gone |
| 20:55.51 | greg_work | by what you described, its acting like _918X |
| 20:55.54 | Tenkawa | that's got to help |
| 20:55.56 | Madkiss | you can log into the 7960? |
| 20:55.58 | asterisk99 | anyone here know if LEN() function works or not? |
| 20:55.59 | Madkiss | Good grief! |
| 20:56.00 | Tenkawa | had to move cards around |
| 20:56.16 | benthos | asterisk99: it works, but limited functionnality |
| 20:56.20 | kimosabe | is it possible to configure the sipura 3000 model so that the fxo interface will take a trunk and allow you to send it to a diffrent location via ip |
| 20:56.26 | dack | this guy has the same problem, no explaination was given here either: http://forums.digium.com/viewtopic.php?t=351&highlight=digittimeout |
| 20:56.26 | benthos | I think it has a limit of like 79 characters |
| 20:56.40 | asterisk99 | benthos: i am getting very wierd behavior |
| 20:56.50 | Nugget | Subject: !ncrease the LENgth of your @sterisk!!!!!!! |
| 20:56.59 | iCEBrkr | hahah |
| 20:57.13 | benthos | asterisk99: what kind of weird behaviour ? |
| 20:57.16 | asterisk99 | benthos: I am trying to test the length of a variable, but it seems to give me the couont of the NAME of the variable |
| 20:57.32 | greg_work | kimosabe: that is what an ATA does by definition |
| 20:57.45 | kimosabe | is there a good voice over ip rpovider that has 5 dollar plans and accepts international credit cards |
| 20:57.52 | dack | greg_work: i just tried making "_5XX" and "_5XXX". I doesn't wait for the 4th digit. goes immediately into "5XX" |
| 20:58.04 | benthos | asterisk99: what does your extension line look like ? |
| 20:58.05 | kimosabe | greg_work yes but suposably the fxo takes a trunk for back up purposes only |
| 20:58.28 | kimosabe | not so that you can take ths trunk and send it to a new location |
| 20:58.37 | kimosabe | tru e? |
| 20:58.38 | greg_work | kimosabe: huh? like it doesn't make the fxo available on SIP? |
| 20:59.14 | asterisk99 | benthos: I set up a very simple dialplpan for 100 ... 100,1,SetVar(abc=xxxxxxxxxxxxxxxxxxxxxxxxx) |
| 20:59.23 | kimosabe | i want city · 1 take trunk via sip my swb line and i want to ecieve it i n 3nd city |
| 21:00.10 | Strom_C | Madkiss: I'm not seeing an option for tone localization; it might be firmware-dependent |
| 21:00.21 | dack | here is what I'm trying to do: http://www.voip-info.org/wiki-Asterisk+Extension+Matching |
| 21:00.40 | Madkiss | Strom_C: Isn't the dialtone dependant of asterisk? |
| 21:00.41 | dack | but it isn't doing this: If you were to dial "123", Asterisk would wait to see if you dial another digit, because it is not clear whether you want extension 123 or, for example, extension 123999, which would match the second pattern defined. |
| 21:00.56 | greg_work | kimosabe: no, from what i can tell it is an fxo gateway |
| 21:01.10 | asterisk99 | benthos: then 100,1,GotoIf([${LEN(${abc})}>100]?9) |
| 21:01.15 | greg_work | maybe theres an option or something to configure either fxo gateway or failover |
| 21:01.42 | dack | miguel3239, greg_work: any ideas? |
| 21:01.48 | Strom_C | Madkiss: not on the 7960 |
| 21:01.49 | asterisk99 | benthos: it ALWAYS takes the jump to 9 |
| 21:02.01 | pigpen | could anyone point me in the right direction, I am getting: line 144: Unable to open master device '/dev/zap/ctl' when I to go run ztcfg -vvv |
| 21:02.16 | Madkiss | Strom_C: oh dear. |
| 21:02.33 | asterisk99 | benthos: and my by reconing 20 is < 20 {Unless new math is implemented in asterisk} |
| 21:02.41 | greg_work | dack: you're using analog phones on an fxs i take it? |
| 21:02.43 | *** join/#asterisk file (~jcolp@mctn1-142166195139.nb.aliant.net) |
| 21:02.43 | asterisk99 | benthos: and my by reconing 20 is < 100 {Unless new math is implemented in asterisk} |
| 21:02.45 | Strom_C | Madkiss: my guess is that there may be a localized version of the firmware you can load |
| 21:02.47 | iCEBrkr | /bin/sh: line 1: data: command not found |
| 21:02.50 | iCEBrkr | errr |
| 21:02.53 | dack | greg_work: SIP phones |
| 21:02.53 | iCEBrkr | Thu Jul 14 17:02:51 EDT 2005 |
| 21:02.57 | iCEBrkr | 2 minutes late!?!!? |
| 21:03.02 | iCEBrkr | BEER O'CLOCK |
| 21:03.05 | *** join/#asterisk L|NUX (linux@202.5.146.14) |
| 21:03.06 | Strom_C | Madkiss: or you could get used to North American tones :) |
| 21:03.12 | greg_work | dack: SIP phones don't pay attention to extensions.conf |
| 21:03.14 | Madkiss | Strom_C: I rather doubt that, honestly |
| 21:03.28 | dack | greg_work: what do you mean? |
| 21:03.28 | benthos | asterisk99: how about if you do a NoOp(${LEN(${abc})}) what does it give you ? |
| 21:03.43 | Strom_C | im still mucking about with mine to see if i can change the tones though |
| 21:03.46 | greg_work | dack: SIP phones only send one dialstring |
| 21:03.53 | iCEBrkr | dack: he means SIP phones don't read the extensions.conf file. that's just for asterisk to read |
| 21:03.54 | dack | greg_work: it's grandstreams with early dial, and no passwords to avoid the early dial bug |
| 21:03.54 | greg_work | dack: so there's usually a dialplan in the phone itself |
| 21:03.58 | *** join/#asterisk shmaltz (~chatzilla@69.28.255.210) |
| 21:04.03 | Damin | iCEBrkr: Hey bastard! :) |
| 21:04.13 | iCEBrkr | Damin: dude, don't make me any more late for Beer Time! |
| 21:04.22 | iCEBrkr | I'm already 4mins late. |
| 21:04.25 | iCEBrkr | :D |
| 21:04.27 | Damin | Sorry.. |
| 21:04.36 | miguel3239 | dack: are you trying to have the system play invalid for any invalid extensions entered? |
| 21:04.38 | *** join/#asterisk zoa (~k@213.91.216.136) |
| 21:04.41 | iCEBrkr | anyhow |
| 21:04.42 | dack | greg_work: but with early dial it sends the digits as you enter them, and asterisk decides if it is a complete extension or not... |
| 21:04.43 | iCEBrkr | I'm outta here |
| 21:05.03 | greg_work | dack: uh .. that sounds impossible |
| 21:05.04 | zoa | anyone from digium here ? |
| 21:05.04 | *** join/#asterisk pietro (~pietro@host254-67.pool8258.interbusiness.it) |
| 21:05.06 | pietro | hello |
| 21:05.16 | shmaltz | anybody here ever intergrated Avaya partner with Asterisk? |
| 21:05.19 | dack | greg_work: that's what it already is doing..... have you not heard of early dial? |
| 21:05.22 | pietro | how to i choose a codec for voip ? |
| 21:05.28 | greg_work | dack: from what i know of SIP you have to send the whole thing at once |
| 21:05.33 | greg_work | no |
| 21:05.33 | dack | greg_work: nope. |
| 21:05.46 | asterisk99 | benthos: i get 33, which is correct |
| 21:06.35 | greg_work | dack: did you read http://www.voip-info.org/tiki-index.php?page=Asterisk+phone+grandstream+budgetone |
| 21:06.51 | *** part/#asterisk TripleFFF2sdf (~TripleFFF@modemcable131.156-131-66.mc.videotron.ca) |
| 21:06.52 | dack | greg_work: yes. a quote from voip-info.org: Early Dial means that the BudgetTone sends for each pressed digit a SIP INVITE message to Asterisk. Asterisk looks into its extensions and, if no match happened yet, it sends back a "484 Address Incomplete" message. Otherwise, it executes the action. |
| 21:06.59 | Strom_C | Madkiss: I think I'm pretty much dead in the water on localizing these tones, but don't give up; I don't know as much about these as some do |
| 21:07.16 | greg_work | dack: yeah, ok. new to me |
| 21:07.26 | dack | greg_work: i guess basically what I'm seeing then is a bug in the SIP channel with early dial |
| 21:07.34 | miguel3239 | dack: On my system I followed the instructions on "Alternative NOT using i" if what you are trying to do is capture incorrect extensions. It is working so far for me: http://www.voip-info.org/tiki-index.php?page=Asterisk+i+extension |
| 21:07.35 | greg_work | you also read Currently (Firmware 1.0.4.55 and 1.0.4.63), early dial does not work. |
| 21:07.55 | dack | miguel3239: tried that. It doesn't work (and it's not quite what I want to do either). |
| 21:08.04 | dack | greg_work: that is out of date. it does work now. |
| 21:08.13 | miguel3239 | dack: Okay... sorry I couldn't help... I am going to back out now |
| 21:08.27 | dack | i guess i'll just have to file a bug report... |
| 21:08.51 | dack | miguel3239: thanks any miguel3239 |
| 21:08.55 | greg_work | it could be a bug with the way * processes partial SIP addresses i guess... |
| 21:08.58 | dack | s/any/anyway |
| 21:09.07 | dack | greg_work: that's what I'm thinking. |
| 21:09.12 | Madkiss | Strom_C: Oh dear. |
| 21:09.45 | greg_work | one thing i can see is if it sends "address incomplete" when it doesn't match yet, really, once it DOES match one (but could also match something else) it's no longer 'incomplete' but some other status .. like 'possbily complete' |
| 21:10.03 | greg_work | there would need to be a mechanism for the SIP phone to say it's done .. or a timeout |
| 21:10.15 | greg_work | one option, of course, is to turn off early dial ...... |
| 21:10.39 | dack | greg_work: yes, but then you always have to wait for the phone's timeout or press a "send" key. |
| 21:11.04 | asterisk99 | benthos: I found a bug in GotoIf... The comparison opertaor (e.g. >) must have a space on either side!!!!! |
| 21:11.05 | greg_work | yep |
| 21:11.09 | greg_work | thats what we do here |
| 21:11.18 | greg_work | i usually dial then pickup, and it calls right away |
| 21:11.19 | *** join/#asterisk _santiago_ (~santiago@63.245.86.173) |
| 21:11.19 | dack | i would have expected it to work the same way as an analog phone would |
| 21:11.49 | Madkiss | Strom_C: I am still not convinced this is not something related to asterisk ... hm. |
| 21:11.51 | dack | greg_work: it's a pain when you start doing menus and such |
| 21:11.58 | tzafrir | asterisk99, a documented bug is usually called "feature" |
| 21:12.01 | brookshire | zoa: where are you? |
| 21:12.05 | greg_work | menus ? |
| 21:12.23 | greg_work | that's only to start a SIP session (ie, place a phone call) |
| 21:12.41 | dack | greg_work: i know. what if you call your voicemail? |
| 21:12.48 | OloBola | does anyone know offhand how may kHz audio files are recorded at? |
| 21:12.52 | greg_work | if you're connected to something - like a remote IVR, or an application ,like voicemail - digits are processed instantly |
| 21:13.01 | dack | then you want to press a key to go to the next message |
| 21:13.03 | OloBola | ulaw I mean |
| 21:13.09 | greg_work | yes, and it happens immediately |
| 21:13.25 | greg_work | think of it as sending the tone down the line |
| 21:13.35 | OloBola | does anyone know offhand how may kHz ulaw files are recorded at? |
| 21:13.44 | asterisk99 | benthos: Well here's a kewl feature GotoIf($[1>100]?9) always takes the jump ( in la-la land 1 is suddenly greater that 100 ) |
| 21:13.44 | eKo1 | 8 |
| 21:13.47 | greg_work | whereas starting a SIP session (placinga new call) it sends a packet that says "dial this number: xxxxxxx" |
| 21:14.25 | dack | greg_work: hrmz.... I didn't realize it would do that once connected. |
| 21:14.34 | asterisk99 | benthos: But GotoIf($[1 > 100]?9) never takes the jump ( sanity reigns supreme once again ) |
| 21:15.13 | greg_work | asterisk99: thats because in dialplan, everything is a string |
| 21:15.20 | trig | is there anyplace to find a good list of ringers or should I just start making some? Getting asked about "fun" ringers. |
| 21:15.28 | greg_work | 1>100 is considered the string "1>100" which evaluates to true |
| 21:15.41 | greg_work | (since there's no condition, and its non-zero and not empty) |
| 21:16.02 | *** join/#asterisk Alfa_ (mathias@alexandria.nixia.no) |
| 21:16.07 | greg_work | you have to put spaces around operators to get * to recoginize them as operators, then it actually evaluates it |
| 21:16.16 | asterisk99 | greg_work: so why wouldn't 1 > 100 be considered a stringy thingy either? |
| 21:16.25 | greg_work | because there's spaces |
| 21:16.40 | asterisk99 | greg_work: cuz if I wuz a computer, space is just another character |
| 21:17.20 | greg_work | yes, but it's been told to recoginize " > " (or " < " or " + " or " = ") as operators |
| 21:17.26 | greg_work | so it evalutes the expression |
| 21:17.53 | greg_work | it also treats 1 and 100 as strings .. but then sees you're trying to do a numerical comparison, and so it tries to convert them to numbers |
| 21:18.11 | Strom_C | yay, both my payphones have dial tone now! |
| 21:18.26 | asterisk99 | greg_work: odd... strange syntax... whitespace actually changes behaviour.... thank god Basic, C, Perl, and Fortran don't do that |
| 21:18.42 | SarahEmm | go strom! |
| 21:18.59 | Strom_C | I love 3M scotchlok buttsplices |
| 21:19.03 | SarahEmm | :) |
| 21:19.06 | Strom_C | insert wire, crimp, snap |
| 21:19.23 | greg_work | asterisk99: yes, it is odd. and as a programmer i find it very annoying and always forget and mess it up :p |
| 21:19.34 | cj | Strom_C: I saw some of those yesterday. Very nifty. |
| 21:19.55 | asterisk99 | greg_work: I agree... This syntax is very unforgiving (like my wife!!!!!) |
| 21:20.48 | asterisk99 | greg_work: Too bad they didn't take your syntax and pass it to a Perl eval() function |
| 21:20.52 | *** join/#asterisk kFuQ (~somedude@c-67-185-114-199.hsd1.wa.comcast.net) |
| 21:21.17 | greg_work | well, you can run an agi or fastagi or use res_perl .... ;) |
| 21:21.51 | asterisk99 | greg_work: I wrote a db engine years ago and provided syntax (and all I did was cheat and pass it to Perl's eval()... made me look like a frikkin' genius which I;m far from being) |
| 21:22.40 | *** join/#asterisk JohnJacob (~JohnJacob@pcp0011543387pcs.mainf01.in.comcast.net) |
| 21:23.00 | OloBola | when recording audio, what is the format for u-law? 11 kHz mono? |
| 21:23.17 | asterisk99 | greg_work: I was thinking about agi, but what happens if my perl code gets an error... is the error shown in asterisk's cLI> stream? |
| 21:24.15 | greg_work | asterisk99: usually not, since it expects to have an AGI conversation, not see perl errors. you can see it with agi debug though |
| 21:24.16 | asterisk99 | greg_work: If not, it would be like the early days of CGI... when you debugged by braille |
| 21:24.36 | greg_work | asterisk99: and really, don't use an AGI unless you really need it. it's a lot more overhead than dialplan logic |
| 21:24.42 | asterisk99 | greg_work: agi debug??? |
| 21:24.44 | greg_work | espesially for doing 1 > 100 :p |
| 21:24.50 | greg_work | asterisk99: from the * console |
| 21:25.27 | asterisk99 | greg_work: Hmmmmm..... asterisk needs a new dialplan language |
| 21:25.52 | asterisk99 | greg_work: One a programmer (and a programmer's mother) would love |
| 21:25.56 | Madkiss | Strom_C: It has never come to my mind that cisco distributes special firmware versions ... |
| 21:26.09 | loud | as in ? |
| 21:26.24 | greg_work | meh, the dialplan isn't that bad |
| 21:26.46 | greg_work | it can do basic stuff, you just have to remember a few little caveats |
| 21:26.49 | asterisk99 | greg_work: It's "OK" ... weird... but livable |
| 21:26.54 | Nugget | dialplan syntax and structure is klunky and akward, but it's manageable. |
| 21:27.15 | greg_work | and if you want a full fledged programming language, then theres no point in even having the dialplan. just modify the * source code to do what you want ;) |
| 21:27.23 | asterisk99 | greg_work: But I can see the moment yu want to get sophisticated, it's gonna start falling apart |
| 21:27.35 | greg_work | or (realistically) write it in a real prorgamming language, and call it as an agi |
| 21:27.53 | greg_work | i haven't found any areas where agi + dialplan couldn't manage |
| 21:28.03 | SpaceBass | is it after 5? yep... scotch time.... |
| 21:28.13 | asterisk99 | greg_work: But if you blow up in agi, you are gonna be "blind" |
| 21:28.55 | greg_work | asterisk99: so, write logging into your program, and don't deploy scripts before you test them |
| 21:29.01 | greg_work | these are basic software design concepts |
| 21:29.19 | pawalls | Crap |
| 21:29.53 | pawalls | What is the option/config file for setting how many rings asterisk waits before asterisk "answers" a zaptel interface |
| 21:30.12 | pawalls | As in.. before it even puts it into the dialplan. |
| 21:30.14 | asterisk99 | greg_work: Hehehe. Thhat's tantamount too NASA saying, "We can't get the pump switch to work... let's roll the sucker back and rip the whole flippin' shuttle apart!!!!!" --- wait a min... that's what they may have to do |
| 21:30.34 | asterisk99 | greg_work: Oh god!!! That's mean!!!! |
| 21:31.12 | asterisk99 | greg_work: Well... Rant time over... back to work.... or maybe not... did someoone say it was Beer Time???? |
| 21:31.26 | greg_work | yeah i think so. i'm going home now. its hot in here and i'm hungry :p |
| 21:35.19 | SwK[Work] | NET SPLIT! |
| 21:35.19 | SpaceBass | fun |
| 21:35.30 | udfc | bye ! |
| 21:35.44 | *** join/#asterisk anthm (~anthmct@CPE-69-76-83-52.wi.res.rr.com) [NETSPLIT VICTIM] |
| 21:35.44 | *** join/#asterisk _santiago_ (~santiago@63.245.86.173) [NETSPLIT VICTIM] |
| 21:35.45 | *** join/#asterisk asterisk99 (~chatzilla@modemcable111.209-131-66.mc.videotron.ca) [NETSPLIT VICTIM] |
| 21:35.45 | *** join/#asterisk dr123 (~asdf@12-202-51-38.client.insightBB.com) [NETSPLIT VICTIM] |
| 21:35.45 | *** join/#asterisk sivana (~sivana@mixdown.ca) [NETSPLIT VICTIM] |
| 21:35.45 | *** join/#asterisk jansaell (~jan@h94n2c1o1124.bredband.skanova.com) |
| 21:35.45 | *** join/#asterisk Koshatul (~evangelio@ip157.net65.ipnetworks.net.au) [NETSPLIT VICTIM] |
| 21:35.45 | *** join/#asterisk gravemind (~omgwtfbbq@GXTi.developer.freenode) [NETSPLIT VICTIM] |
| 21:35.45 | *** join/#asterisk znoG (~gs@200.115.216.109) |
| 21:35.45 | *** join/#asterisk benthos (~n_o_b_o_d@69.90.85.25) [NETSPLIT VICTIM] |
| 21:35.45 | *** join/#asterisk toot (toot@212.20.250.187) [NETSPLIT VICTIM] |
| 21:35.45 | *** join/#asterisk yxa (empty@cm121.gamma228.maxonline.com.sg) [NETSPLIT VICTIM] |
| 21:35.45 | *** join/#asterisk loud (~roots@cypher.punk.net) [NETSPLIT VICTIM] |
| 21:35.45 | *** join/#asterisk samyk (~samy@adsl-68-123-234-50.dsl.irvnca.pacbell.net) [NETSPLIT VICTIM] |
| 21:35.45 | *** join/#asterisk _mwoodj_ (~mwoodj@hyper-eye.digium.sponsor.pdpc) [NETSPLIT VICTIM] |
| 21:35.45 | *** join/#asterisk brookshire (~matt@207.111.174.1) [NETSPLIT VICTIM] |
| 21:35.45 | *** join/#asterisk mozrat (~mozrat@mozrat01.vm.bytemark.co.uk) [NETSPLIT VICTIM] |
| 21:35.45 | *** join/#asterisk f3r (~fer@68.63.43.200.powervt.com.ar) [NETSPLIT VICTIM] |
| 21:35.45 | *** join/#asterisk Corydon76-home (nine@Corydon76-home.sustaining.supporter.pdpc) [NETSPLIT VICTIM] |
| 21:35.45 | *** join/#asterisk Supaplex (~supaplex@shell.aros.net) |
| 21:35.45 | *** join/#asterisk SwK (pgzpll@12-219-156-206.client.mchsi.com) [NETSPLIT VICTIM] |
| 21:35.45 | *** join/#asterisk So3kris (~jan-wille@soekris.xs4all.nl) [NETSPLIT VICTIM] |
| 21:35.45 | *** join/#asterisk iswm (iswm@iswm.user) [NETSPLIT VICTIM] |
| 21:35.45 | *** join/#asterisk kajtzu (~kajtzu@212.226.212.95) [NETSPLIT VICTIM] |
| 21:35.45 | *** join/#asterisk thalunil (~thalunil@walledcity.de) [NETSPLIT VICTIM] |
| 21:35.45 | *** join/#asterisk R3DB0x (nobody@66.142.28.36) [NETSPLIT VICTIM] |
| 21:35.46 | *** join/#asterisk Silik0n (~krice@newrso.suspicious.org) [NETSPLIT VICTIM] |
| 21:35.46 | *** join/#asterisk easydone (~notdone@eksel.demon.nl) [NETSPLIT VICTIM] |
| 21:35.46 | *** join/#asterisk Corydon-w (white@vcchgate.vcch01.springfield.tn.us.vcch.net) [NETSPLIT VICTIM] |
| 21:35.46 | *** join/#asterisk d-tech (~dtc@node-423a1ebb.cle.onnet.us.uu.net) [NETSPLIT VICTIM] |
| 21:35.46 | *** join/#asterisk macTijn (martijn@linda.net.insecure.nl) [NETSPLIT VICTIM] |
| 21:35.46 | *** join/#asterisk DougRoyer (doug@70-67.69-92-cpe.cableone.net) [NETSPLIT VICTIM] |
| 21:35.46 | *** join/#asterisk xkev (~kevin@orbit.xmission.com) [NETSPLIT VICTIM] |
| 21:35.46 | *** join/#asterisk PatrickDK (patrickdk@dyn-19-218.myactv.net) [NETSPLIT VICTIM] |
| 21:35.46 | *** mode/#asterisk [+o anthm] by irc.freenode.net |
| 21:35.55 | *** join/#asterisk denon (denon@synapse.subneural.net) [NETSPLIT VICTIM] |
| 21:35.55 | *** join/#asterisk L|NUX (linux@202.5.146.14) |
| 21:35.55 | *** join/#asterisk shido6 (~greg@d221-68-209.commercial.cgocable.net) [NETSPLIT VICTIM] |
| 21:35.55 | *** join/#asterisk clive- (~pirch@rrba-146-104-189.telkomadsl.co.za) [NETSPLIT VICTIM] |
| 21:35.55 | *** join/#asterisk ast_freak (~jesse@hades-out.universalsystems.net) [NETSPLIT VICTIM] |
| 21:35.56 | *** join/#asterisk jaiger (~jaiger@fire.innovationsw.com) [NETSPLIT VICTIM] |
| 21:35.56 | *** join/#asterisk viLeR (1000@ip-47-252.telesat.com.co) [NETSPLIT VICTIM] |
| 21:35.56 | *** join/#asterisk yaaar (~chatzilla@lifebook.tranquility.net) [NETSPLIT VICTIM] |
| 21:35.56 | *** join/#asterisk enots (dimka@freelsd.net) [NETSPLIT VICTIM] |
| 21:35.56 | *** join/#asterisk dtwilson (~dave@host217-36-121-129.in-addr.btopenworld.com) [NETSPLIT VICTIM] |
| 21:35.56 | *** join/#asterisk mhnoyes (~mhnoyes@user-38lc125.dialup.mindspring.com) [NETSPLIT VICTIM] |
| 21:35.56 | *** join/#asterisk Mike (~mike@201.135.48.252) [NETSPLIT VICTIM] |
| 21:35.56 | *** join/#asterisk dieck (~dieck@saengerschafter.de) [NETSPLIT VICTIM] |
| 21:35.56 | *** join/#asterisk solar (~solar@smtp.gentoo.org) [NETSPLIT VICTIM] |
| 21:35.56 | *** join/#asterisk mountie (~mountie@24.42.99.232) [NETSPLIT VICTIM] |
| 21:35.56 | *** join/#asterisk af_ (~af@ip-131-22.sn2.eutelia.it) [NETSPLIT VICTIM] |
| 21:35.56 | *** join/#asterisk Strom_C (~strom@66.159.243.60) [NETSPLIT VICTIM] |
| 21:35.56 | *** join/#asterisk syle (~blah@wnpgmb06dc1-167-98.dynamic.mts.net) [NETSPLIT VICTIM] |
| 21:35.56 | *** join/#asterisk cj (~cjcollier@CJ.monthly-bronze.supporter.pdpc) [NETSPLIT VICTIM] |
| 21:35.56 | *** join/#asterisk Juggie (~agony@CPE00c049d9f271-CM00137186c8d8.cpe.net.cable.rogers.com) [NETSPLIT VICTIM] |
| 21:35.56 | *** join/#asterisk jlewis (~jlewis@solo.atlantic.net) [NETSPLIT VICTIM] |
| 21:35.56 | *** join/#asterisk dsfr (~dsfr@dsfr.digium.sponsor.pdpc) [NETSPLIT VICTIM] |
| 21:35.56 | *** join/#asterisk Umaro (~umaro@67.189.110.20) [NETSPLIT VICTIM] |
| 21:35.56 | *** join/#asterisk hardwire (~hardwire@209.112.194.45) [NETSPLIT VICTIM] |
| 21:35.56 | *** join/#asterisk anti (russ@anti.developer.gentoo) [NETSPLIT VICTIM] |
| 21:35.56 | *** join/#asterisk Syncros (~sysop@noc.routermonkey.net) [NETSPLIT VICTIM] |
| 21:35.56 | *** join/#asterisk Patrick^ (~patrickm@birch4.mountaincable.net) [NETSPLIT VICTIM] |
| 21:35.56 | *** join/#asterisk jonathh (~asd@host81-136-131-42.in-addr.btopenworld.com) [NETSPLIT VICTIM] |
| 21:35.56 | *** join/#asterisk maik (~maik@bfs.cs.uni-sb.de) |
| 21:35.56 | *** join/#asterisk drray (~drray@dsl254-011-243.sea1.dsl.speakeasy.net) [NETSPLIT VICTIM] |
| 21:35.56 | *** join/#asterisk rajo (~rajo@bfs.cs.uni-sb.de) |
| 21:35.57 | *** join/#asterisk Math` (~math@modemcable166.240-37-24.mc.videotron.ca) [NETSPLIT VICTIM] |
| 21:35.57 | *** join/#asterisk wshs (screwy@69-168-246-252.bflony.adelphia.net) [NETSPLIT VICTIM] |
| 21:35.57 | *** join/#asterisk rv_weasel (~no@adsl-66-142-40-127.dsl.kscymo.swbell.net) [NETSPLIT VICTIM] |
| 21:35.57 | *** join/#asterisk Mw3 (mw3@daisy.chains.ch) [NETSPLIT VICTIM] |
| 21:35.57 | *** join/#asterisk Madkiss (madkiss@madkiss.staff.freenode) [NETSPLIT VICTIM] |
| 21:35.57 | *** join/#asterisk terracon (~tc@CPE0050da608e99-CM0012254076d6.cpe.net.cable.rogers.com) [NETSPLIT VICTIM] |
| 21:35.57 | *** join/#asterisk trig_hm (~jb@home.monkeypr0n.org) [NETSPLIT VICTIM] |
| 21:35.57 | *** join/#asterisk WilliamK (~wkeller@c-24-0-130-177.hsd1.tx.comcast.net) [NETSPLIT VICTIM] |
| 21:35.57 | *** join/#asterisk roamer323 (~sing@67.71.62.212) [NETSPLIT VICTIM] |
| 21:35.57 | *** join/#asterisk srt (~nobody@gw0-cgn.reucon.net) [NETSPLIT VICTIM] |
| 21:35.57 | *** join/#asterisk Chotaire (chotaire@chotaire.net) [NETSPLIT VICTIM] |
| 21:35.57 | *** join/#asterisk jero (~boo@199.243.85.90) [NETSPLIT VICTIM] |
| 21:35.57 | *** join/#asterisk emrah (~emrah@aslann.aslann.net) [NETSPLIT VICTIM] |
| 21:35.57 | *** join/#asterisk dros7 (~simon@laotan.openflows.org) [NETSPLIT VICTIM] |
| 21:35.57 | *** join/#asterisk fenlander (~neils@82.152.81.57) [NETSPLIT VICTIM] |
| 21:35.57 | *** join/#asterisk cypromis (~michael@83.149.70.59) |
| 21:35.57 | *** join/#asterisk Elshar (~Elshar@I.wants.your.cheekan.org) [NETSPLIT VICTIM] |
| 21:35.57 | *** join/#asterisk prh (~paul@wacka.mjr.org) |
| 21:35.57 | *** join/#asterisk IronHelix (~irc@ool-45785cfe.dyn.optonline.net) [NETSPLIT VICTIM] |
| 21:35.57 | *** join/#asterisk devel (~devel@wiggum.digitalcoven.com) [NETSPLIT VICTIM] |
| 21:35.57 | *** join/#asterisk _m_ (~m@fbta199.fbta.uni-karlsruhe.de) [NETSPLIT VICTIM] |
| 21:35.57 | *** join/#asterisk blitzrage (~blitzrage@blitzrage.documenter.extraordinaire.of.asterisk) |
| 21:35.57 | *** join/#asterisk techie (gus@antibala.com) [NETSPLIT VICTIM] |
| 21:35.58 | *** join/#asterisk trelane (trelane@66.93.203.199) [NETSPLIT VICTIM] |
| 21:35.58 | *** mode/#asterisk [+o denon] by irc.freenode.net |
| 21:35.58 | *** join/#asterisk CoaxD (coax@12.47.34.11) [NETSPLIT VICTIM] |
| 21:35.58 | *** join/#asterisk likwid-- (~likwid@nc-65-162-200-167.dyn.sprint-hsd.net) [NETSPLIT VICTIM] |
| 21:35.58 | *** join/#asterisk hohum (corbe@snoop.burghcom.com) [NETSPLIT VICTIM] |
| 21:35.58 | *** join/#asterisk stevek (~stevek@slim-eth0.horizonlive.net) [NETSPLIT VICTIM] |
| 21:35.58 | *** join/#asterisk ApEtc (apetc@ip-66-218-241-107.cableaz.com) [NETSPLIT VICTIM] |
| 21:35.58 | *** join/#asterisk puowvip (ircuser@the-legacy-never-dies.diamond.org) [NETSPLIT VICTIM] |
| 21:35.58 | *** join/#asterisk jontow (jontow@ws.woflsys.net) [NETSPLIT VICTIM] |
| 21:35.58 | *** join/#asterisk mishehu (mishehu@cshells.shavedgoats.net) [NETSPLIT VICTIM] |
| 21:35.58 | *** join/#asterisk slePP (~slepp@S0106000f663692da.ed.shawcable.net) [NETSPLIT VICTIM] |
| 21:36.13 | *** join/#asterisk Nivex (kjotte@user-0c8hq5r.cable.mindspring.com) |
| 21:36.13 | SwK[Work] | NETJOIN! |
| 21:36.14 | *** join/#asterisk JohnJacob (~JohnJacob@pcp0011543387pcs.mainf01.in.comcast.net) [NETSPLIT VICTIM] |
| 21:36.14 | *** join/#asterisk Alfa_ (mathias@alexandria.nixia.no) [NETSPLIT VICTIM] |
| 21:36.14 | *** join/#asterisk wizhippo (~wizhippo@Quebec-HSE-ppp233869.qc.sympatico.ca) [NETSPLIT VICTIM] |
| 21:36.14 | *** join/#asterisk trig (~jb@xob.neospire.net) [NETSPLIT VICTIM] |
| 21:36.14 | *** join/#asterisk Darwin35 (~darwin@ip70-186-117-198.ma.dl.cox.net) [NETSPLIT VICTIM] |
| 21:36.14 | *** join/#asterisk clinthome (~clinthome@snap.helixsystems.com) [NETSPLIT VICTIM] |
| 21:36.15 | *** join/#asterisk jsharp (~jsharp@65.88.255.132) [NETSPLIT VICTIM] |
| 21:36.16 | *** join/#asterisk rjreb (~rjreb@greatwall.amer.net) [NETSPLIT VICTIM] |
| 21:36.16 | *** join/#asterisk danalien (~danalien@danalien.user) [NETSPLIT VICTIM] |
| 21:36.16 | *** join/#asterisk `Sauron (sauron@h-69-3-12-50.hstqtx02.covad.net) [NETSPLIT VICTIM] |
| 21:36.16 | *** join/#asterisk tekati (~captain@cpe-66-75-215-63.bak.res.rr.com) |
| 21:36.16 | *** join/#asterisk flynux (5inodyv@pingou.in) [NETSPLIT VICTIM] |
| 21:36.16 | *** join/#asterisk SplasPood (jwb@paravolve.net) [NETSPLIT VICTIM] |
| 21:36.16 | *** join/#asterisk MooingLemur (~troy@phx200.pinchaser.com) [NETSPLIT VICTIM] |
| 21:36.16 | *** join/#asterisk pawalls (~pawalls@pawalls.teamgleim.com) [NETSPLIT VICTIM] |
| 21:36.16 | *** join/#asterisk cervajs (~cervajs@cervajs.fpf.slu.cz) [NETSPLIT VICTIM] |
| 21:36.16 | *** join/#asterisk pcm (~pcm@user-69-73-0-22.knology.net) [NETSPLIT VICTIM] |
| 21:36.16 | *** join/#asterisk talkwebhosts (~freenoder@c-24-127-182-46.hsd1.ca.comcast.net) [NETSPLIT VICTIM] |
| 21:36.16 | *** join/#asterisk InfraRed (~bigboss@master.subhi.com) [NETSPLIT VICTIM] |
| 21:36.16 | *** join/#asterisk sneak (~sneak@64.220.234.21.ptr.us.xo.net) [NETSPLIT VICTIM] |
| 21:36.16 | *** join/#asterisk Ahrimanes (~aron@hobbes.bsd-dk.dk) [NETSPLIT VICTIM] |
| 21:36.16 | *** join/#asterisk eldu (~damajor@tuxmania.org) [NETSPLIT VICTIM] |
| 21:36.16 | *** join/#asterisk key2 (~tree@gob75-2-81-56-64-17.fbx.proxad.net) [NETSPLIT VICTIM] |
| 21:36.16 | *** join/#asterisk Poincare (~jefffnode@dD5779BD2.access.telenet.be) [NETSPLIT VICTIM] |
| 21:36.16 | *** join/#asterisk pjz (~pj@place.org) [NETSPLIT VICTIM] |
| 21:36.16 | *** join/#asterisk cpatry (~grepmoo@65.39.228.5) [NETSPLIT VICTIM] |
| 21:36.16 | *** join/#asterisk Damin (~damin@nucleus.nacs.net) [NETSPLIT VICTIM] |
| 21:36.16 | *** join/#asterisk tclark (~TC@S0106000c413a1c61.gv.shawcable.net) [NETSPLIT VICTIM] |
| 21:36.16 | *** join/#asterisk implicit (~bayan@209.80.0.43) [NETSPLIT VICTIM] |
| 21:36.16 | *** join/#asterisk jesster (jesster@jesster.org) [NETSPLIT VICTIM] |
| 21:36.16 | *** join/#asterisk pietro (~pietro@host254-67.pool8258.interbusiness.it) [NETSPLIT VICTIM] |
| 21:36.17 | *** join/#asterisk jtodd (~jtodd@204.91.156.2) [NETSPLIT VICTIM] |
| 21:36.17 | *** join/#asterisk florz (nobody@2001:1a50:503c:0:0:0:0:1) [NETSPLIT VICTIM] |
| 21:36.17 | *** join/#asterisk jhiver (~jhiver@AStDenis-101-2-4-33.w193-253.abo.wanadoo.fr) [NETSPLIT VICTIM] |
| 21:36.17 | *** join/#asterisk dwmw2_gone (~dwmw2@baythorne.infradead.org) [NETSPLIT VICTIM] |
| 21:36.17 | *** join/#asterisk ncjp (~switch@61.206.115.5.user.ad.il24.net) [NETSPLIT VICTIM] |
| 21:36.56 | OloBola | is the audio quality the same when using RECORD as it is for voicemail? My RECORD wav's seem to be much lower quality, I could be hallucinating though |
| 21:36.57 | *** join/#asterisk JohnJacob (~JohnJacob@pcp0011543387pcs.mainf01.in.comcast.net) [NETSPLIT VICTIM] |
| 21:36.57 | *** join/#asterisk Alfa_ (mathias@alexandria.nixia.no) [NETSPLIT VICTIM] |
| 21:36.57 | *** join/#asterisk wizhippo (~wizhippo@Quebec-HSE-ppp233869.qc.sympatico.ca) [NETSPLIT VICTIM] |
| 21:36.57 | *** join/#asterisk trig (~jb@xob.neospire.net) [NETSPLIT VICTIM] |
| 21:36.57 | *** join/#asterisk Darwin35 (~darwin@ip70-186-117-198.ma.dl.cox.net) [NETSPLIT VICTIM] |
| 21:36.57 | *** join/#asterisk clinthome (~clinthome@snap.helixsystems.com) [NETSPLIT VICTIM] |
| 21:36.57 | *** join/#asterisk jsharp (~jsharp@65.88.255.132) [NETSPLIT VICTIM] |
| 21:36.57 | *** join/#asterisk rjreb (~rjreb@greatwall.amer.net) [NETSPLIT VICTIM] |
| 21:36.57 | *** join/#asterisk danalien (~danalien@danalien.user) [NETSPLIT VICTIM] |
| 21:36.57 | *** join/#asterisk `Sauron (sauron@h-69-3-12-50.hstqtx02.covad.net) [NETSPLIT VICTIM] |
| 21:36.57 | *** join/#asterisk tekati (~captain@cpe-66-75-215-63.bak.res.rr.com) |
| 21:36.57 | *** join/#asterisk flynux (5inodyv@pingou.in) [NETSPLIT VICTIM] |
| 21:36.57 | *** join/#asterisk SplasPood (jwb@paravolve.net) [NETSPLIT VICTIM] |
| 21:36.57 | *** join/#asterisk MooingLemur (~troy@phx200.pinchaser.com) [NETSPLIT VICTIM] |
| 21:36.57 | *** join/#asterisk pawalls (~pawalls@pawalls.teamgleim.com) [NETSPLIT VICTIM] |
| 21:36.57 | *** join/#asterisk cervajs (~cervajs@cervajs.fpf.slu.cz) [NETSPLIT VICTIM] |
| 21:36.57 | *** join/#asterisk pcm (~pcm@user-69-73-0-22.knology.net) [NETSPLIT VICTIM] |
| 21:36.57 | *** join/#asterisk talkwebhosts (~freenoder@c-24-127-182-46.hsd1.ca.comcast.net) [NETSPLIT VICTIM] |
| 21:36.57 | *** join/#asterisk InfraRed (~bigboss@master.subhi.com) [NETSPLIT VICTIM] |
| 21:36.57 | *** join/#asterisk sneak (~sneak@64.220.234.21.ptr.us.xo.net) [NETSPLIT VICTIM] |
| 21:36.57 | *** join/#asterisk Ahrimanes (~aron@hobbes.bsd-dk.dk) [NETSPLIT VICTIM] |
| 21:36.57 | *** join/#asterisk eldu (~damajor@tuxmania.org) [NETSPLIT VICTIM] |
| 21:36.57 | *** join/#asterisk key2 (~tree@gob75-2-81-56-64-17.fbx.proxad.net) [NETSPLIT VICTIM] |
| 21:36.57 | *** join/#asterisk Poincare (~jefffnode@dD5779BD2.access.telenet.be) [NETSPLIT VICTIM] |
| 21:36.57 | *** join/#asterisk pjz (~pj@place.org) [NETSPLIT VICTIM] |
| 21:36.57 | *** join/#asterisk cpatry (~grepmoo@65.39.228.5) [NETSPLIT VICTIM] |
| 21:36.58 | *** join/#asterisk Damin (~damin@nucleus.nacs.net) [NETSPLIT VICTIM] |
| 21:36.58 | *** join/#asterisk tclark (~TC@S0106000c413a1c61.gv.shawcable.net) [NETSPLIT VICTIM] |
| 21:36.58 | *** join/#asterisk implicit (~bayan@209.80.0.43) [NETSPLIT VICTIM] |
| 21:36.58 | *** join/#asterisk jesster (jesster@jesster.org) [NETSPLIT VICTIM] |
| 21:37.16 | *** join/#asterisk anthm (~anthmct@CPE-69-76-83-52.wi.res.rr.com) [NETSPLIT VICTIM] |
| 21:37.16 | *** join/#asterisk jesster (jesster@jesster.org) [NETSPLIT VICTIM] |
| 21:37.16 | *** join/#asterisk implicit (~bayan@209.80.0.43) [NETSPLIT VICTIM] |
| 21:37.16 | *** join/#asterisk tclark (~TC@S0106000c413a1c61.gv.shawcable.net) [NETSPLIT VICTIM] |
| 21:37.16 | *** join/#asterisk Damin (~damin@nucleus.nacs.net) [NETSPLIT VICTIM] |
| 21:37.16 | *** join/#asterisk cpatry (~grepmoo@65.39.228.5) [NETSPLIT VICTIM] |
| 21:37.16 | *** join/#asterisk pjz (~pj@place.org) [NETSPLIT VICTIM] |
| 21:37.16 | *** join/#asterisk Poincare (~jefffnode@dD5779BD2.access.telenet.be) [NETSPLIT VICTIM] |
| 21:37.16 | *** join/#asterisk key2 (~tree@gob75-2-81-56-64-17.fbx.proxad.net) [NETSPLIT VICTIM] |
| 21:37.16 | *** join/#asterisk eldu (~damajor@tuxmania.org) [NETSPLIT VICTIM] |
| 21:37.16 | *** join/#asterisk Ahrimanes (~aron@hobbes.bsd-dk.dk) [NETSPLIT VICTIM] |
| 21:37.16 | *** join/#asterisk sneak (~sneak@64.220.234.21.ptr.us.xo.net) [NETSPLIT VICTIM] |
| 21:37.16 | *** join/#asterisk InfraRed (~bigboss@master.subhi.com) [NETSPLIT VICTIM] |
| 21:37.16 | *** join/#asterisk talkwebhosts (~freenoder@c-24-127-182-46.hsd1.ca.comcast.net) [NETSPLIT VICTIM] |
| 21:37.16 | *** join/#asterisk pcm (~pcm@user-69-73-0-22.knology.net) [NETSPLIT VICTIM] |
| 21:37.16 | *** join/#asterisk cervajs (~cervajs@cervajs.fpf.slu.cz) [NETSPLIT VICTIM] |
| 21:37.16 | *** join/#asterisk pawalls (~pawalls@pawalls.teamgleim.com) [NETSPLIT VICTIM] |
| 21:37.16 | *** join/#asterisk MooingLemur (~troy@phx200.pinchaser.com) [NETSPLIT VICTIM] |
| 21:37.16 | *** join/#asterisk SplasPood (jwb@paravolve.net) [NETSPLIT VICTIM] |
| 21:37.16 | *** join/#asterisk flynux (5inodyv@pingou.in) [NETSPLIT VICTIM] |
| 21:37.16 | *** join/#asterisk tekati (~captain@cpe-66-75-215-63.bak.res.rr.com) [NETSPLIT VICTIM] |
| 21:37.16 | *** join/#asterisk `Sauron (sauron@h-69-3-12-50.hstqtx02.covad.net) [NETSPLIT VICTIM] |
| 21:37.16 | *** join/#asterisk danalien (~danalien@danalien.user) [NETSPLIT VICTIM] |
| 21:37.16 | *** join/#asterisk rjreb (~rjreb@greatwall.amer.net) [NETSPLIT VICTIM] |
| 21:37.17 | *** join/#asterisk jsharp (~jsharp@65.88.255.132) [NETSPLIT VICTIM] |
| 21:37.17 | *** join/#asterisk clinthome (~clinthome@snap.helixsystems.com) [NETSPLIT VICTIM] |
| 21:37.17 | *** join/#asterisk Darwin35 (~darwin@ip70-186-117-198.ma.dl.cox.net) [NETSPLIT VICTIM] |
| 21:37.17 | *** join/#asterisk trig (~jb@xob.neospire.net) [NETSPLIT VICTIM] |
| 21:37.17 | *** join/#asterisk wizhippo (~wizhippo@Quebec-HSE-ppp233869.qc.sympatico.ca) [NETSPLIT VICTIM] |
| 21:37.17 | *** join/#asterisk Alfa_ (mathias@alexandria.nixia.no) [NETSPLIT VICTIM] |
| 21:37.17 | *** join/#asterisk JohnJacob (~JohnJacob@pcp0011543387pcs.mainf01.in.comcast.net) [NETSPLIT VICTIM] |
| 21:37.17 | *** join/#asterisk _santiago_ (~santiago@63.245.86.173) [NETSPLIT VICTIM] |
| 21:37.17 | *** join/#asterisk Exomorph (Exomorph@216.251.134.9) [NETSPLIT VICTIM] |
| 21:37.17 | *** join/#asterisk asterisk99 (~chatzilla@modemcable111.209-131-66.mc.videotron.ca) [NETSPLIT VICTIM] |
| 21:37.17 | *** join/#asterisk meppl (~mephisto@A7d28.a.pppool.de) [NETSPLIT VICTIM] |
| 21:37.17 | *** join/#asterisk dr123 (~asdf@12-202-51-38.client.insightBB.com) [NETSPLIT VICTIM] |
| 21:37.17 | *** join/#asterisk stkn (~stkn@stkn-active-pdpc.developer.gentoo) [NETSPLIT VICTIM] |
| 21:37.17 | *** join/#asterisk sivana (~sivana@mixdown.ca) [NETSPLIT VICTIM] |
| 21:37.17 | *** join/#asterisk jansaell (~jan@h94n2c1o1124.bredband.skanova.com) [NETSPLIT VICTIM] |
| 21:37.17 | *** join/#asterisk Koshatul (~evangelio@ip157.net65.ipnetworks.net.au) [NETSPLIT VICTIM] |
| 21:37.17 | *** join/#asterisk gravemind (~omgwtfbbq@GXTi.developer.freenode) [NETSPLIT VICTIM] |
| 21:37.17 | *** join/#asterisk znoG (~gs@200.115.216.109) [NETSPLIT VICTIM] |
| 21:37.17 | *** join/#asterisk benthos (~n_o_b_o_d@69.90.85.25) [NETSPLIT VICTIM] |
| 21:37.17 | *** join/#asterisk toot (toot@212.20.250.187) [NETSPLIT VICTIM] |
| 21:37.17 | *** join/#asterisk yxa (empty@cm121.gamma228.maxonline.com.sg) [NETSPLIT VICTIM] |
| 21:37.17 | *** join/#asterisk juice (~juice@mo-69-69-247-217.dyn.sprint-hsd.net) [NETSPLIT VICTIM] |
| 21:37.17 | *** join/#asterisk loud (~roots@cypher.punk.net) [NETSPLIT VICTIM] |
| 21:37.17 | *** join/#asterisk samyk (~samy@adsl-68-123-234-50.dsl.irvnca.pacbell.net) [NETSPLIT VICTIM] |
| 21:37.17 | *** join/#asterisk _mwoodj_ (~mwoodj@hyper-eye.digium.sponsor.pdpc) [NETSPLIT VICTIM] |
| 21:37.17 | *** join/#asterisk brookshire (~matt@207.111.174.1) [NETSPLIT VICTIM] |
| 21:37.17 | *** mode/#asterisk [+o anthm] by irc.freenode.net |
| 21:37.18 | *** join/#asterisk mozrat (~mozrat@mozrat01.vm.bytemark.co.uk) [NETSPLIT VICTIM] |
| 21:37.18 | *** join/#asterisk emp (~emp@70.57.239.37) [NETSPLIT VICTIM] |
| 21:37.18 | *** join/#asterisk bytee_ (~byte@byte.fedora) [NETSPLIT VICTIM] |
| 21:37.18 | *** join/#asterisk f3r (~fer@68.63.43.200.powervt.com.ar) [NETSPLIT VICTIM] |
| 21:37.18 | *** join/#asterisk iCEBrkr (icebrkr@rrcs-24-129-130-158.se.biz.rr.com) [NETSPLIT VICTIM] |
| 21:37.18 | *** join/#asterisk Turulo (~weed@117.Red-83-52-245.pooles.rima-tde.net) [NETSPLIT VICTIM] |
| 21:37.18 | *** join/#asterisk casele (~case@donpanic.faveve.uni-stuttgart.de) [NETSPLIT VICTIM] |
| 21:37.18 | *** join/#asterisk Corydon76-home (nine@Corydon76-home.sustaining.supporter.pdpc) [NETSPLIT VICTIM] |
| 21:37.18 | *** join/#asterisk Toi (~pleemans@d5152D12D.access.telenet.be) [NETSPLIT VICTIM] |
| 21:37.18 | *** join/#asterisk infinity1 (brendon@solara.netcal.com) [NETSPLIT VICTIM] |
| 21:37.18 | *** join/#asterisk timecop (timecop@AnimeNfo.com) [NETSPLIT VICTIM] |
| 21:37.18 | *** join/#asterisk Supaplex (~supaplex@shell.aros.net) [NETSPLIT VICTIM] |
| 21:37.18 | *** join/#asterisk SwK (pgzpll@12-219-156-206.client.mchsi.com) [NETSPLIT VICTIM] |
| 21:37.18 | *** join/#asterisk MajestiK (~MajestiK@S01060800208687ec.ed.shawcable.net) [NETSPLIT VICTIM] |
| 21:37.19 | *** join/#asterisk So3kris (~jan-wille@soekris.xs4all.nl) [NETSPLIT VICTIM] |
| 21:37.19 | *** join/#asterisk iswm (iswm@iswm.user) [NETSPLIT VICTIM] |
| 21:37.19 | *** join/#asterisk KryoStoffer (~kri@helium.kri.dk) [NETSPLIT VICTIM] |
| 21:37.19 | *** join/#asterisk Beirdo (~gjhurlbu@beirdo.user) [NETSPLIT VICTIM] |
| 21:37.19 | *** join/#asterisk crash3m (crash3m@crash3m.user) [NETSPLIT VICTIM] |
| 21:37.19 | *** join/#asterisk Mike9 (~sturdee@ireland.pathwaynet.com) [NETSPLIT VICTIM] |
| 21:37.19 | *** join/#asterisk kajtzu (~kajtzu@212.226.212.95) [NETSPLIT VICTIM] |
| 21:37.19 | *** join/#asterisk hellop (~hellop@cpe-70-93-40-171.hawaii.res.rr.com) [NETSPLIT VICTIM] |
| 21:37.19 | *** join/#asterisk lung (~lung@24-148-96-186.ip.mhcable.com) [NETSPLIT VICTIM] |
| 21:37.19 | *** join/#asterisk dant (~dan@81-86-69-213.dsl.pipex.com) [NETSPLIT VICTIM] |
| 21:37.19 | *** join/#asterisk litage (~nick@ws01.5749.dsl.winshop.com.au) [NETSPLIT VICTIM] |
| 21:37.19 | *** join/#asterisk thalunil (~thalunil@walledcity.de) [NETSPLIT VICTIM] |
| 21:37.19 | *** join/#asterisk R3DB0x (nobody@66.142.28.36) [NETSPLIT VICTIM] |
| 21:37.19 | *** join/#asterisk Silik0n (~krice@newrso.suspicious.org) [NETSPLIT VICTIM] |
| 21:37.19 | *** join/#asterisk JamesDotCom (~james@sweep.bur.st) [NETSPLIT VICTIM] |
| 21:37.19 | *** join/#asterisk kore (kore@mindwipe.org) [NETSPLIT VICTIM] |
| 21:37.19 | *** join/#asterisk easydone (~notdone@eksel.demon.nl) [NETSPLIT VICTIM] |
| 21:37.19 | *** join/#asterisk Godsey (lanny@204.17.223.9) [NETSPLIT VICTIM] |
| 21:37.19 | *** join/#asterisk kaldemar (~kalde@vipunen.hut.fi) [NETSPLIT VICTIM] |
| 21:37.19 | *** join/#asterisk jalsot (~tamas@abacus.eworldcom.hu) [NETSPLIT VICTIM] |
| 21:37.19 | *** join/#asterisk Falle (falstaf@voip-forum.se) [NETSPLIT VICTIM] |
| 21:37.19 | *** join/#asterisk Corydon-w (white@vcchgate.vcch01.springfield.tn.us.vcch.net) [NETSPLIT VICTIM] |
| 21:37.19 | *** join/#asterisk d-tech (~dtc@node-423a1ebb.cle.onnet.us.uu.net) [NETSPLIT VICTIM] |
| 21:37.19 | *** join/#asterisk Evanrude (~david@wsip-68-15-251-34.dl.dl.cox.net) [NETSPLIT VICTIM] |
| 21:37.19 | *** join/#asterisk PatrickDK (patrickdk@dyn-19-218.myactv.net) [NETSPLIT VICTIM] |
| 21:37.19 | *** join/#asterisk xkev (~kevin@orbit.xmission.com) [NETSPLIT VICTIM] |
| 21:37.19 | *** join/#asterisk DougRoyer (doug@70-67.69-92-cpe.cableone.net) [NETSPLIT VICTIM] |
| 21:37.20 | *** join/#asterisk macTijn (martijn@linda.net.insecure.nl) [NETSPLIT VICTIM] |
| 21:37.20 | *** join/#asterisk nitram (foo@superblob.com) [NETSPLIT VICTIM] |
| 21:37.35 | udfc | set net_mode = yoyo |
| 21:37.36 | *** join/#asterisk denon (denon@synapse.subneural.net) [NETSPLIT VICTIM] |
| 21:37.36 | *** join/#asterisk L|NUX (linux@202.5.146.14) [NETSPLIT VICTIM] |
| 21:37.36 | *** join/#asterisk shido6 (~greg@d221-68-209.commercial.cgocable.net) [NETSPLIT VICTIM] |
| 21:37.36 | *** join/#asterisk clive- (~pirch@rrba-146-104-189.telkomadsl.co.za) [NETSPLIT VICTIM] |
| 21:37.36 | *** join/#asterisk ast_freak (~jesse@hades-out.universalsystems.net) [NETSPLIT VICTIM] |
| 21:37.36 | *** join/#asterisk jaiger (~jaiger@fire.innovationsw.com) [NETSPLIT VICTIM] |
| 21:37.36 | *** join/#asterisk viLeR (1000@ip-47-252.telesat.com.co) [NETSPLIT VICTIM] |
| 21:37.36 | *** join/#asterisk yaaar (~chatzilla@lifebook.tranquility.net) [NETSPLIT VICTIM] |
| 21:37.36 | *** join/#asterisk enots (dimka@freelsd.net) [NETSPLIT VICTIM] |
| 21:37.36 | *** join/#asterisk dtwilson (~dave@host217-36-121-129.in-addr.btopenworld.com) [NETSPLIT VICTIM] |
| 21:37.36 | *** join/#asterisk mhnoyes (~mhnoyes@user-38lc125.dialup.mindspring.com) [NETSPLIT VICTIM] |
| 21:37.36 | *** join/#asterisk Mike (~mike@201.135.48.252) [NETSPLIT VICTIM] |
| 21:37.36 | *** join/#asterisk dieck (~dieck@saengerschafter.de) [NETSPLIT VICTIM] |
| 21:37.36 | *** join/#asterisk solar (~solar@smtp.gentoo.org) [NETSPLIT VICTIM] |
| 21:37.36 | *** join/#asterisk mountie (~mountie@24.42.99.232) [NETSPLIT VICTIM] |
| 21:37.36 | *** join/#asterisk af_ (~af@ip-131-22.sn2.eutelia.it) [NETSPLIT VICTIM] |
| 21:37.36 | *** join/#asterisk Strom_C (~strom@66.159.243.60) [NETSPLIT VICTIM] |
| 21:37.36 | *** join/#asterisk syle (~blah@wnpgmb06dc1-167-98.dynamic.mts.net) [NETSPLIT VICTIM] |
| 21:37.36 | *** join/#asterisk cj (~cjcollier@CJ.monthly-bronze.supporter.pdpc) [NETSPLIT VICTIM] |
| 21:37.36 | *** join/#asterisk Juggie (~agony@CPE00c049d9f271-CM00137186c8d8.cpe.net.cable.rogers.com) [NETSPLIT VICTIM] |
| 21:37.36 | *** join/#asterisk jlewis (~jlewis@solo.atlantic.net) [NETSPLIT VICTIM] |
| 21:37.36 | *** join/#asterisk dsfr (~dsfr@dsfr.digium.sponsor.pdpc) [NETSPLIT VICTIM] |
| 21:37.36 | *** join/#asterisk Umaro (~umaro@67.189.110.20) [NETSPLIT VICTIM] |
| 21:37.36 | *** join/#asterisk hardwire (~hardwire@209.112.194.45) [NETSPLIT VICTIM] |
| 21:37.37 | *** join/#asterisk anti (russ@anti.developer.gentoo) [NETSPLIT VICTIM] |
| 21:37.37 | *** join/#asterisk Syncros (~sysop@noc.routermonkey.net) [NETSPLIT VICTIM] |
| 21:37.37 | *** join/#asterisk Patrick^ (~patrickm@birch4.mountaincable.net) [NETSPLIT VICTIM] |
| 21:37.37 | *** join/#asterisk jonathh (~asd@host81-136-131-42.in-addr.btopenworld.com) [NETSPLIT VICTIM] |
| 21:37.37 | *** join/#asterisk maik (~maik@bfs.cs.uni-sb.de) |
| 21:37.37 | *** join/#asterisk drray (~drray@dsl254-011-243.sea1.dsl.speakeasy.net) [NETSPLIT VICTIM] |
| 21:37.37 | *** join/#asterisk rajo (~rajo@bfs.cs.uni-sb.de) |
| 21:37.37 | *** join/#asterisk Math` (~math@modemcable166.240-37-24.mc.videotron.ca) [NETSPLIT VICTIM] |
| 21:37.37 | *** join/#asterisk wshs (screwy@69-168-246-252.bflony.adelphia.net) [NETSPLIT VICTIM] |
| 21:37.37 | *** join/#asterisk rv_weasel (~no@adsl-66-142-40-127.dsl.kscymo.swbell.net) [NETSPLIT VICTIM] |
| 21:37.37 | *** join/#asterisk Mw3 (mw3@daisy.chains.ch) [NETSPLIT VICTIM] |
| 21:37.37 | *** join/#asterisk Madkiss (madkiss@madkiss.staff.freenode) [NETSPLIT VICTIM] |
| 21:37.37 | *** join/#asterisk terracon (~tc@CPE0050da608e99-CM0012254076d6.cpe.net.cable.rogers.com) [NETSPLIT VICTIM] |
| 21:37.37 | *** join/#asterisk trig_hm (~jb@home.monkeypr0n.org) [NETSPLIT VICTIM] |
| 21:37.37 | *** join/#asterisk WilliamK (~wkeller@c-24-0-130-177.hsd1.tx.comcast.net) [NETSPLIT VICTIM] |
| 21:37.37 | *** join/#asterisk roamer323 (~sing@67.71.62.212) [NETSPLIT VICTIM] |
| 21:37.37 | *** join/#asterisk srt (~nobody@gw0-cgn.reucon.net) [NETSPLIT VICTIM] |
| 21:37.37 | *** join/#asterisk Chotaire (chotaire@chotaire.net) [NETSPLIT VICTIM] |
| 21:37.37 | *** join/#asterisk jero (~boo@199.243.85.90) [NETSPLIT VICTIM] |
| 21:37.37 | *** join/#asterisk emrah (~emrah@aslann.aslann.net) [NETSPLIT VICTIM] |
| 21:37.37 | *** join/#asterisk dros7 (~simon@laotan.openflows.org) [NETSPLIT VICTIM] |
| 21:37.37 | *** join/#asterisk fenlander (~neils@82.152.81.57) [NETSPLIT VICTIM] |
| 21:37.37 | *** join/#asterisk cypromis (~michael@83.149.70.59) |
| 21:37.37 | *** join/#asterisk Elshar (~Elshar@I.wants.your.cheekan.org) [NETSPLIT VICTIM] |
| 21:37.38 | *** join/#asterisk prh (~paul@wacka.mjr.org) |
| 21:37.38 | *** join/#asterisk IronHelix (~irc@ool-45785cfe.dyn.optonline.net) [NETSPLIT VICTIM] |
| 21:37.38 | *** join/#asterisk devel (~devel@wiggum.digitalcoven.com) [NETSPLIT VICTIM] |
| 21:37.38 | *** join/#asterisk _m_ (~m@fbta199.fbta.uni-karlsruhe.de) [NETSPLIT VICTIM] |
| 21:37.38 | *** join/#asterisk blitzrage (~blitzrage@blitzrage.documenter.extraordinaire.of.asterisk) |
| 21:37.38 | *** join/#asterisk techie (gus@antibala.com) [NETSPLIT VICTIM] |
| 21:37.38 | *** join/#asterisk trelane (trelane@66.93.203.199) [NETSPLIT VICTIM] |
| 21:37.39 | *** mode/#asterisk [+o denon] by irc.freenode.net |
| 21:37.39 | *** join/#asterisk CoaxD (coax@12.47.34.11) [NETSPLIT VICTIM] |
| 21:37.39 | *** join/#asterisk likwid-- (~likwid@nc-65-162-200-167.dyn.sprint-hsd.net) [NETSPLIT VICTIM] |
| 21:37.39 | *** join/#asterisk hohum (corbe@snoop.burghcom.com) [NETSPLIT VICTIM] |
| 21:37.39 | *** join/#asterisk stevek (~stevek@slim-eth0.horizonlive.net) [NETSPLIT VICTIM] |
| 21:37.39 | *** join/#asterisk ApEtc (apetc@ip-66-218-241-107.cableaz.com) [NETSPLIT VICTIM] |
| 21:37.39 | *** join/#asterisk puowvip (ircuser@the-legacy-never-dies.diamond.org) [NETSPLIT VICTIM] |
| 21:37.39 | *** join/#asterisk jontow (jontow@ws.woflsys.net) [NETSPLIT VICTIM] |
| 21:37.39 | *** join/#asterisk mishehu (mishehu@cshells.shavedgoats.net) [NETSPLIT VICTIM] |
| 21:37.39 | *** join/#asterisk slePP (~slepp@S0106000f663692da.ed.shawcable.net) [NETSPLIT VICTIM] |
| 21:37.56 | yaaar | SPLITTERS!!!! |
| 21:37.57 | *** join/#asterisk Hmmhesays (negative3k@66.173.103.108) [NETSPLIT VICTIM] |
| 21:37.57 | *** join/#asterisk newl (~newlook@203-59-217-50.dyn.iinet.net.au) [NETSPLIT VICTIM] |
| 21:37.57 | *** join/#asterisk CdtDelta (~CdtDelta@dsl081-225-161.chi1.dsl.speakeasy.net) [NETSPLIT VICTIM] |
| 21:37.57 | *** join/#asterisk mogorman (~mogorman@207.111.174.1) [NETSPLIT VICTIM] |
| 21:37.57 | *** join/#asterisk ptblank (~MURDER1@68-65-93-235.lmdaca.adelphia.net) [NETSPLIT VICTIM] |
| 21:37.57 | *** join/#asterisk A-Tuin|work (~A-Tuin@nat.office.legend.net.uk) [NETSPLIT VICTIM] |
| 21:37.57 | *** join/#asterisk A-Tuin (~a-tuin@steves.ip.v4.me.uk) [NETSPLIT VICTIM] |
| 21:37.57 | cj | maybe I'll wait until this finishes before I ask again... |
| 21:37.57 | OloBola | is this IRC's equivalent to an earthquake ? |
| 21:37.57 | *** join/#asterisk dant (~dan@81-86-69-213.dsl.pipex.com) [NETSPLIT VICTIM] |
| 21:37.57 | *** join/#asterisk kore (kore@mindwipe.org) [NETSPLIT VICTIM] |
| 21:37.57 | *** join/#asterisk Evanrude (~david@wsip-68-15-251-34.dl.dl.cox.net) [NETSPLIT VICTIM] |
| 21:38.15 | udfc | set net_mode = stable (may be ) |
| 21:38.15 | *** join/#asterisk anthm (~anthmct@CPE-69-76-83-52.wi.res.rr.com) [NETSPLIT VICTIM] |
| 21:38.15 | *** join/#asterisk _santiago_ (~santiago@63.245.86.173) [NETSPLIT VICTIM] |
| 21:38.15 | *** join/#asterisk asterisk99 (~chatzilla@modemcable111.209-131-66.mc.videotron.ca) [NETSPLIT VICTIM] |
| 21:38.15 | *** join/#asterisk dr123 (~asdf@12-202-51-38.client.insightBB.com) [NETSPLIT VICTIM] |
| 21:38.15 | *** join/#asterisk sivana (~sivana@mixdown.ca) [NETSPLIT VICTIM] |
| 21:38.15 | *** join/#asterisk jansaell (~jan@h94n2c1o1124.bredband.skanova.com) |
| 21:38.15 | *** join/#asterisk Koshatul (~evangelio@ip157.net65.ipnetworks.net.au) [NETSPLIT VICTIM] |
| 21:38.15 | *** join/#asterisk gravemind (~omgwtfbbq@GXTi.developer.freenode) [NETSPLIT VICTIM] |
| 21:38.15 | *** join/#asterisk znoG (~gs@200.115.216.109) [NETSPLIT VICTIM] |
| 21:38.15 | *** join/#asterisk benthos (~n_o_b_o_d@69.90.85.25) [NETSPLIT VICTIM] |
| 21:38.15 | *** join/#asterisk toot (toot@212.20.250.187) [NETSPLIT VICTIM] |
| 21:38.15 | *** join/#asterisk yxa (empty@cm121.gamma228.maxonline.com.sg) [NETSPLIT VICTIM] |
| 21:38.15 | *** join/#asterisk loud (~roots@cypher.punk.net) [NETSPLIT VICTIM] |
| 21:38.15 | *** join/#asterisk samyk (~samy@adsl-68-123-234-50.dsl.irvnca.pacbell.net) [NETSPLIT VICTIM] |
| 21:38.15 | *** join/#asterisk _mwoodj_ (~mwoodj@hyper-eye.digium.sponsor.pdpc) [NETSPLIT VICTIM] |
| 21:38.15 | *** join/#asterisk brookshire (~matt@207.111.174.1) [NETSPLIT VICTIM] |
| 21:38.15 | *** join/#asterisk mozrat (~mozrat@mozrat01.vm.bytemark.co.uk) |
| 21:38.15 | *** join/#asterisk f3r (~fer@68.63.43.200.powervt.com.ar) [NETSPLIT VICTIM] |
| 21:38.15 | *** join/#asterisk Corydon76-home (nine@Corydon76-home.sustaining.supporter.pdpc) [NETSPLIT VICTIM] |
| 21:38.15 | *** join/#asterisk Supaplex (~supaplex@shell.aros.net) |
| 21:38.15 | *** join/#asterisk SwK (pgzpll@12-219-156-206.client.mchsi.com) [NETSPLIT VICTIM] |
| 21:38.15 | *** join/#asterisk So3kris (~jan-wille@soekris.xs4all.nl) [NETSPLIT VICTIM] |
| 21:38.15 | *** join/#asterisk iswm (iswm@iswm.user) [NETSPLIT VICTIM] |
| 21:38.16 | *** join/#asterisk kajtzu (~kajtzu@212.226.212.95) [NETSPLIT VICTIM] |
| 21:38.16 | *** join/#asterisk thalunil (~thalunil@walledcity.de) [NETSPLIT VICTIM] |
| 21:38.16 | *** join/#asterisk R3DB0x (nobody@66.142.28.36) [NETSPLIT VICTIM] |
| 21:38.16 | *** join/#asterisk Silik0n (~krice@newrso.suspicious.org) [NETSPLIT VICTIM] |
| 21:38.16 | *** join/#asterisk easydone (~notdone@eksel.demon.nl) [NETSPLIT VICTIM] |
| 21:38.16 | *** join/#asterisk Corydon-w (white@vcchgate.vcch01.springfield.tn.us.vcch.net) [NETSPLIT VICTIM] |
| 21:38.16 | *** join/#asterisk d-tech (~dtc@node-423a1ebb.cle.onnet.us.uu.net) [NETSPLIT VICTIM] |
| 21:38.16 | *** join/#asterisk macTijn (martijn@linda.net.insecure.nl) [NETSPLIT VICTIM] |
| 21:38.16 | *** join/#asterisk DougRoyer (doug@70-67.69-92-cpe.cableone.net) [NETSPLIT VICTIM] |
| 21:38.16 | *** join/#asterisk xkev (~kevin@orbit.xmission.com) [NETSPLIT VICTIM] |
| 21:38.16 | *** join/#asterisk PatrickDK (patrickdk@dyn-19-218.myactv.net) [NETSPLIT VICTIM] |
| 21:38.16 | *** mode/#asterisk [+o anthm] by irc.freenode.net |
| 21:38.49 | udfc | Hey cletis, quit futzing with that cable |
| 21:39.24 | Qwell | cj: good idea |
| 21:39.31 | Qwell | OloBola: no, this is the IRC equivalent of a foreshock |
| 21:39.53 | *** join/#asterisk RoyK (~roy@179.80-203-29.nextgentel.com) |
| 21:39.53 | Qwell | lilo: Fix it! :P |
| 21:39.54 | yaaar | SPLITTERS!!!! |
| 21:40.01 | RoyK | <PROTECTED> |
| 21:40.21 | *** join/#asterisk Barmal (~info@c-24-30-75-206.hsd1.ga.comcast.net) |
| 21:40.52 | Madkiss | Strom_C: Maybe it has something to do with the language settings? |
| 21:40.56 | Barmal | does anybody know what this error means? got SIP response 481 "Call Leg does not exist" |
| 21:41.03 | Strom_C | Madkiss: perhaps |
| 21:41.37 | Madkiss | Strom_C: My 7960 does not offer me "German" as language |
| 21:41.49 | Hmmhesays | vad seriously sucks sometimes |
| 21:42.03 | Madkiss | Hmmhesays: Do you eventually have an idea on the dialtone issue? |
| 21:42.21 | Madkiss | Hmmhesays: My dialtone is just wrong - the north american one, instead of the german one. |
| 21:42.44 | file | Strom_C: poke |
| 21:43.25 | DarthClue | ~cluecon |
| 21:43.25 | jbot | well, cluecon is http://www.cluecon.com - The Open Source Telephony Expo and Developers Conference featuring presentations by Mark Spencer, Greg Boehnlein, Ken Rice, Brian West, Vikrant Mathur, Craig Southeren, David Sugar, Bob Andreasen, Joshua Colp, Greg Merriweather, Brian Fertig, Peter Nixon, and Marc Olivier Chouinard. |
| 21:43.26 | Corydon-w | Would someone PUH-LEEEZE unsubscribe the guy who left his vacation program spouting to the list? |
| 21:43.40 | cj | anyone know what would cause this? |
| 21:43.42 | cj | Jul 14 14:05:04 NOTICE[3725] res_musiconhold.c: Request to schedule in the past?!?! |
| 21:44.39 | *** join/#asterisk dasenjo (~dasenjo@63.245.86.173) |
| 21:45.03 | Hmmhesays | everyone should have north american dial tone |
| 21:45.09 | Madkiss | no |
| 21:45.14 | Madkiss | I don't want t |
| 21:45.15 | Alfa_ | cj: I think that's mentioned in the asterisk tips&tricks section of the voip-info-wiki |
| 21:45.18 | Madkiss | it sounds strange :P |
| 21:46.23 | file | Come to Cluecon to see me really run into a wall! |
| 21:46.59 | doolph | which wall |
| 21:47.20 | file | a great wall |
| 21:47.27 | pietro | how to i choose a codec for voip ? |
| 21:47.27 | cj | thanks, alfa. I'll check there. |
| 21:47.41 | doolph | pietro uh? |
| 21:47.44 | OloBola | is the audio quality the same when using RECORD as it is for voicemail? My RECORD wav's seem to be much lower quality, I could be hallucinating though |
| 21:47.45 | DarthClue | pietro: come to cluecon. |
| 21:47.50 | cj | when the asterisk -d -vvv output says Couldn't establish connection. Check debug., what exactly does it mean? |
| 21:47.59 | bkw_ | add -r |
| 21:48.06 | cj | thanks |
| 21:48.25 | cj | full error line: Jul 14 14:46:15 WARNING[5951]: res_config_mysql.c:439 load_module: MySQL RealTime: Couldn't establish connection. Check debug. |
| 21:50.07 | benthos | asterisk99: True, forgot about that one... I knew I had a similar problem :-) |
| 21:52.35 | cj | Alfa_: switching to the alsa driver vice oss fixed it, it seems |
| 21:53.04 | *** join/#asterisk ptblank (~MURDER1@68-65-93-235.lmdaca.adelphia.net) |
| 21:53.19 | *** join/#asterisk darkskiez (~mhb@host-84-9-91-168.bulldogdsl.com) |
| 21:54.07 | yaaar | so what do you guys use for cordless phones on your * boxes? i'd like to have either 900MHz or 5.8GHz, as the 2.4 band is extremely crowded right here... |
| 21:54.26 | Alfa_ | cj: Good, I'll remember that :-) |
| 21:54.32 | yaaar | do you use regular cordless phones on iaxy's, or are there cordless sip/iax phones around that i'm not finding? |
| 21:55.18 | cj | what is SCCP? |
| 21:55.21 | yaaar | also, if you plug a regular phone into an iaxy (or grandstream sip adapter, or whatever) can you do things like conference, or put someone on hold and call someone else? |
| 21:55.29 | yaaar | cj: skinny client control protocol |
| 21:55.41 | yaaar | cj: usually just "skinny" |
| 21:55.55 | cj | what does it do? |
| 21:56.14 | dkz | talking of sccp, anyone tried sip ver 7.5? I'm interesting in the remote party id display updating. |
| 21:56.21 | yaaar | cj: it's mostly an alternative way for your PBX to talk to your phones (near as I can tell), as opposed to SIP/IAX. |
| 21:56.51 | cj | Hmmm... looks like it can't bind to port 2000... Wonder what's got it open... |
| 21:56.52 | yaaar | cj: the only thing I really know about it is that skinny is what comes by default on cisco phones, requiring you to upgrade the firmware to a SIP version |
| 21:56.53 | dkz | its nicknamed skinny, as it does very little, the client is very lightweight. |
| 21:57.17 | SpaceBass | yaaar lol |
| 21:57.27 | *** join/#asterisk kFuQ (~somedude@c-67-185-114-199.hsd1.wa.comcast.net) |
| 21:57.35 | cj | I guess I can disable it, then :) |
| 21:57.44 | yaaar | SpaceBass: which part was funny? the skinny discussion or me cursing your time zone/ |
| 21:57.46 | yaaar | ? |
| 21:57.53 | dkz | does anyone have P0S-3-07-5-00.zip or similar / |
| 21:58.01 | Alfa_ | I'll just repeat myself now that the netsplit is over... DTMF works with SIP, ulaw and rfc2833 on incoming calls, but not when using auto-dialout (outgoing-spool). Any ideas? |
| 21:58.06 | yaaar | dkz: i didn't realize 7.5 was out. i've got 7.4 |
| 21:58.10 | SpaceBass | yaaar the skinny part, but seeing as how i have very few timezine loylities... that can be funny too |
| 21:58.18 | SpaceBass | anyone have 2.3? |
| 21:58.37 | file | ok everyone, when I say go - signup for Cluecon... readY? |
| 21:58.39 | file | and... |
| 21:58.39 | file | GO! |
| 21:58.45 | yaaar | SpaceBass: i was only cursing your timezone because you made it to scotch time whilst i was still at work |
| 21:58.47 | Qwell | done |
| 21:58.49 | Qwell | What do I win? |
| 21:58.57 | file | a hug! |
| 21:58.59 | dkz | yaaar: reading the release notes it looks like a lot of good fixes, and I'm DAMN keen to see the remote party id update working, so if you get transferred you see wh to, and *8 might be updated to refect the picked up number etc. |
| 21:59.01 | Qwell | eww |
| 21:59.01 | SpaceBass | $300 off reg... nevermind |
| 21:59.25 | SpaceBass | dkz is that 7.5? |
| 21:59.26 | udfc | anybody wana take a shot a why a Polycom IP 500 would just randomly reboot ? |
| 21:59.46 | dkz | SpaceBass: yeh, i've not got it, but i'm keen to try. |
| 21:59.46 | yaaar | udfc: UPS problems? |
| 21:59.49 | tzafrir | Alfa_, details, details, details! for example: to where exactly do you dial? |
| 21:59.51 | SpaceBass | udfc sounds like a malfunction... hardware |
| 22:00.00 | yaaar | hehehehe |
| 22:00.07 | udfc | thats what i think im gona have to explain to ploycom |
| 22:00.12 | SpaceBass | if pcuniverse will EVER get my smartnet setup..... but thats another issue |
| 22:00.21 | Alfa_ | tzafrir: Into my menu-extension |
| 22:00.24 | cj | hmm... looks like I'm having timing issues.. anyone know what causes those? :) |
| 22:00.35 | udfc | i will put it behind a ups tho |
| 22:00.42 | yaaar | udfc: do you have more than one of those polycoms? can you swap power supplies and see if the problem moves to the other phone? |
| 22:00.48 | dkz | SpaceBass: p2p networks only seem to have 7.4 atta moment |
| 22:00.52 | yaaar | or switch where the phones are plugged in... |
| 22:00.59 | udfc | nope this is my test phone, im just getting started testing |
| 22:01.05 | yaaar | yeha |
| 22:01.07 | SpaceBass | dkz yeah saw that |
| 22:01.10 | udfc | the other 3 went to my branch office for a pilot project |
| 22:01.14 | yaaar | jank |
| 22:01.26 | tzafrir | Alfa_, how exactly do you send the dtmf? |
| 22:01.33 | dkz | i'm tempted to randomly tftp request the correct files from random ips, i'm sure someone would reply |
| 22:01.37 | yaaar | alright. closing time folks |
| 22:01.42 | udfc | i will put it behind a ups |
| 22:01.44 | yaaar | catch yall either from home or tomorrow |
| 22:02.11 | udfc | hummm, phone with a picky power supply, not good |
| 22:02.35 | SpaceBass | dkz LOL.. is that like war-dailing for firmware? |
| 22:02.53 | dkz | SpaceBass: :) |
| 22:02.57 | Alfa_ | tzafrir: Pressing the buttons on my desk-POTS-phone... Sorry, forgot some things from my original message. |
| 22:03.56 | Alfa_ | tzafrir: When answering the auto-dialout and trying to use the menus my console is flooded with "Unknown RTP codec 96 received".. |
| 22:03.57 | tzafrir | Alfa_, one thought: how can you eliminate timing issues? |
| 22:04.35 | tzafrir | why rtp? what channel do you use to dial? |
| 22:04.41 | Alfa_ | SIP |
| 22:04.47 | udfc | has anyone found a STABLE and RELIABLE SIP carrier for orig and termination. Price is not important. Im not looking for the cheapest, just the most stable. |
| 22:05.03 | tzafrir | and how is the dtmf passed with that sip channel? |
| 22:05.17 | *** join/#asterisk maruk (~maruk@i-194-106-46-242.freedom2surf.net) |
| 22:05.28 | *** join/#asterisk bjohnson (~bjohnson@i216-58-63-248.igs.net) |
| 22:05.39 | Alfa_ | tzafrir: rfc2833 from my provider. It works when I'm calling in |
| 22:06.00 | *** join/#asterisk DarthClue (~Headaches@adsl-70-244-228-14.dsl.tulsok.swbell.net) |
| 22:06.09 | *** join/#asterisk viLeR (1000@ip-47-252.telesat.com.co) |
| 22:07.52 | Alfa_ | tzafrir: There's like ten of those RTP-messages for each DTMF-tone I pass |
| 22:08.55 | cj | Woo! "modprobe wcfx" fixed the timing errors :) |
| 22:10.32 | cj | What does TDM stand for? |
| 22:10.44 | tzafrir | ~tdm |
| 22:10.44 | jbot | extra, extra, read all about it, tdm is Time Division Multiplexing. It is a scheme in which numerous signals are combined for transmission on a single communications line or channel. Each signal is broken up into many segments, each having very short duration. |
| 22:11.07 | cj | danke |
| 22:11.18 | *** join/#asterisk Corndawg_ (whoisit@c-66-176-249-51.hsd1.fl.comcast.net) |
| 22:11.43 | Strom_C | ah, good old TDM. Welcome to 1973. |
| 22:13.32 | *** join/#asterisk ptblank (~MURDER1@68-65-93-235.lmdaca.adelphia.net) |
| 22:16.07 | *** join/#asterisk JunK-Y (~junky@Toronto-HSE-ppp3743078.sympatico.ca) |
| 22:17.23 | *** join/#asterisk LeeColleton (~lc@dsl254-021-168.sea1.dsl.speakeasy.net) |
| 22:18.13 | LeeColleton | asterisk as installed on my debian Ubuntu system won't start because it runs as the user "asterisk" but its .pid and .ctl files are owned by root. This seems seriously borked. |
| 22:18.45 | LeeColleton | I have to manually change the .pid and .ctl file in /var/run to be owned by asterisk for it to start up |
| 22:27.35 | tzafrir | LeeColleton, the rundir should be /var/run/asterisk |
| 22:27.45 | tzafrir | not /var/run . |
| 22:28.05 | tzafrir | and /var/run/asterisk should be owned by the userand/org group asterisk |
| 22:28.45 | *** join/#asterisk Ariel_ (~Ariel@dsl-20-177.cofs.net) |
| 22:28.56 | tzafrir | edit /etc/asterisk/asterisk.conf . |
| 22:29.40 | tzafrir | And that said, Ubuntu is not exactly Debian... |
| 22:38.19 | Darwin35 | and here I thought now days TDM = Telephone DIaltone modulator |
| 22:38.28 | Darwin35 | Dialtone |
| 22:38.45 | Darwin35 | lol |
| 22:52.56 | cj | where can I find docs about what FXS and FXO are/do? |
| 22:52.58 | cj | ~fxs |
| 22:52.58 | jbot | rumour has it, fxs is foreign exchange system - or the type of port you need to connect a analog device (phone, fax machine) to a pbx |
| 22:53.12 | cj | ~fxo |
| 22:53.12 | jbot | foreign exchange office - type of port you need to connect a POTS (Plain Old Telephone Service) line from your telco to a pbx http://www.digium.com/index.php?menu=fxsvfxo |
| 22:54.09 | Strom_C | gah no, FXS stands for foreign exchange station AFAIK |
| 22:54.17 | cj | so line goes to fxo, phone goes to fxs? |
| 22:54.22 | Strom_C | yes |
| 22:54.27 | file[laptop] | Strom_C: you're silly |
| 22:54.43 | cj | nice |
| 22:54.48 | cj | I'm almost done... maybe... |
| 22:55.23 | udfc | humm, what else does the bot know ? |
| 22:55.35 | cj | how do I tell asterisk to use /var/run/asterisk/asterisk.ctl as the socket rather than /var/run/asterisk.ctl? |
| 22:56.04 | Strom_C | well yes i am |
| 22:56.42 | cj | ah, asterisk.conf |
| 22:56.57 | udfc | ~voip |
| 22:56.57 | jbot | [voip] Voice over IP |
| 22:57.03 | SarahEmm | the bot knows about kitriches! |
| 22:57.05 | SarahEmm | ~sarahemm |
| 22:57.05 | jbot | methinks sarahemm is kitrichernesses. |
| 22:57.06 | SarahEmm | ~kitrich |
| 22:57.07 | jbot | it has been said that kitrich is a cross between an ostrich and a kitten |
| 22:57.26 | file[laptop] | SarahEmm: kitrich! |
| 22:57.30 | udfc | ~btsom |
| 22:57.57 | SarahEmm | ~file |
| 22:58.05 | SarahEmm | *peers* |
| 22:58.08 | SarahEmm | it's updating debian files, aparantly. |
| 22:58.09 | SarahEmm | oops. |
| 22:58.18 | file[laptop] | quite |
| 22:58.29 | SarahEmm | evidently i can't get info on file ;) |
| 22:58.32 | SarahEmm | ~file[laptop] |
| 22:58.32 | jbot | file[laptop] is probably really a bad boy, idiot, or worse |
| 22:58.34 | SarahEmm | ooh. |
| 22:58.35 | *** join/#asterisk MikeJ[Laptop] (~ircatjerr@adsl-69-209-168-226.dsl.sfldmi.ameritech.net) |
| 22:59.39 | *** join/#asterisk file[laptop] (~file[lapt@mctn1-142166195139.nb.aliant.net) |
| 23:01.14 | tzafrir | jbot, forget kitrich |
| 23:01.14 | jbot | tzafrir: i forgot kitrich |
| 23:01.21 | tzafrir | not it doesn't |
| 23:01.33 | *** join/#asterisk MRH2 (~Mr_happy@fcirc-adsl.demon.co.uk) |
| 23:01.38 | blitzrage | zttool requires both ncurses-devel and libnewt? |
| 23:02.01 | tzafrir | libnewt requires ncurses or slang, IIRC |
| 23:02.09 | udfc | somebody remind what the modprobe for the zap driver is |
| 23:02.18 | Qwell | udfc: to load the driver |
| 23:02.26 | Qwell | oh, you mean, whats it called? |
| 23:02.36 | SarahEmm | tzafrir: why forget kitrich? |
| 23:02.38 | SarahEmm | ~kitrich |
| 23:02.43 | SarahEmm | :o(( |
| 23:02.47 | udfc | yes |
| 23:02.50 | tzafrir | wcfxo ? fcfxs ? fctdm? |
| 23:02.52 | udfc | tnx |
| 23:02.53 | Qwell | udfc: what card? |
| 23:03.02 | udfc | the 4 port module card |
| 23:03.12 | Qwell | wctdm |
| 23:03.15 | udfc | from the devel kit |
| 23:03.16 | udfc | tnx |
| 23:03.16 | Qwell | tzafrir: fc? |
| 23:03.17 | tzafrir | SarahEmm, It seems to have scared you |
| 23:03.25 | cj | how do I find out why asterisk can't connect to the mysql db I set up for it? |
| 23:03.26 | tzafrir | wc, right |
| 23:03.27 | SarahEmm | uhh |
| 23:03.29 | SarahEmm | kitrich scared me? |
| 23:03.31 | SarahEmm | i'm a kitrich! |
| 23:03.39 | SarahEmm | it was added there 'cuz ppl kept asking what a kitrich was :P |
| 23:03.55 | tzafrir | well, you can always re-add it |
| 23:04.01 | *** join/#asterisk _DAW (~bob@68-114-110-210.dhcp.slid.la.charter.com) |
| 23:04.10 | cj | Jul 14 16:03:37 ERROR[2399]: res_config_mysql.c:596 mysql_reconnect: MySQL RealTime: Failed to connect database server on . Check debug for more info. |
| 23:04.22 | cj | Where is this "debug" of which it speaks? |
| 23:04.24 | Qwell | cj: It doesn't know the hostname |
| 23:04.52 | tzafrir | cj, see logger.conf regarding where 'debug' goes |
| 23:05.14 | SarahEmm | jbot: kitrich is a cross between an ostrich and a kitten |
| 23:05.14 | jbot | okay, SarahEmm |
| 23:05.20 | cj | [global] |
| 23:05.23 | cj | hostname=localhost |
| 23:05.29 | tzafrir | ~pastebin |
| 23:05.30 | jbot | extra, extra, read all about it, pastebin is a place to paste your stuff without flooding the channel - try http://pastebin.ca |
| 23:06.10 | tzafrir | Hmm, I tend to jump the gun with ~pastebin |
| 23:06.24 | *** join/#asterisk Micc (~dotirc@c-24-18-35-120.hsd1.wa.comcast.net) |
| 23:06.34 | Qwell | tzafrir: better safe then sorry |
| 23:07.07 | cj | oh, sorry, tz |
| 23:07.29 | MRH2 | hope i can ask a really stupid regexp question - I am trying to match if $callerid contains the word test anywhere in it like - gotoif ($["{$CallerId} : test])?2:3 |
| 23:07.43 | Qwell | MRH2: pass it to an AGI |
| 23:07.47 | cj | what's the usual protocol with pastebin? > 3 lines? |
| 23:08.13 | Qwell | cj: depends on the channel... some say > 1, some say > 4, some don't care at all |
| 23:08.15 | tzafrir | cj, two-three lines are certainly permitted and are not a flood |
| 23:08.15 | Qwell | always best to ask |
| 23:08.51 | *** join/#asterisk Weezey (Weezey@vaio2.tsnetworks.ca) |
| 23:09.05 | tzafrir | I just thought it was a beginning of something longer: the whole file |
| 23:09.11 | Weezey | what's new in CVS? |
| 23:09.34 | blitzrage | Weezey: ummmm... lots |
| 23:09.40 | tzafrir | Weezey, cvs diff -r rev1 -r rev2 ? |
| 23:09.41 | blitzrage | Weezey: check the -cvs list |
| 23:09.42 | Weezey | anything good? |
| 23:10.00 | Weezey | mmmm, list. Didn't know it existed. |
| 23:10.03 | Qwell | Weezey: my indications changes :p |
| 23:10.18 | *** join/#asterisk TripleFFF2sdf (~TripleFFF@modemcable131.156-131-66.mc.videotron.ca) |
| 23:10.18 | udfc | are there notes on * on RHEL 4 |
| 23:10.24 | TripleFFF2sdf | wondering how to log off |
| 23:10.38 | TripleFFF2sdf | AgentCallbackLogin([AgentNo|]exten@context) |
| 23:10.38 | udfc | the X top right 8-) |
| 23:10.44 | Weezey | Qwell: now instead of NOTIFY you changed it to Don'TNOTIFY ? |
| 23:10.45 | TripleFFF2sdf | i meant agent logoff |
| 23:10.45 | TripleFFF2sdf | lol |
| 23:10.52 | Qwell | Weezey: huh? |
| 23:11.02 | TripleFFF2sdf | AgentCallbackLogin(|#) |
| 23:11.13 | TripleFFF2sdf | tried that bust always ask for new extensions after uer/pass |
| 23:11.25 | Qwell | Weezey: midi notes in Playtones |
| 23:11.50 | gordonjcp | Qwell: 'lo |
| 23:11.54 | gordonjcp | nn all |
| 23:11.58 | Qwell | gordonjcp: hi |
| 23:12.00 | Qwell | gordonjcp: bye |
| 23:12.09 | Weezey | Qwell: cool |
| 23:12.13 | TripleFFF2sdf | any idea ? |
| 23:13.31 | *** join/#asterisk eng1neer (1000@adsl-68-94-57-152.dsl.rcsntx.swbell.net) |
| 23:13.35 | TripleFFF2sdf | oh |
| 23:13.46 | TripleFFF2sdf | <PROTECTED> |
| 23:13.48 | TripleFFF2sdf | k |
| 23:14.08 | TripleFFF2sdf | easy |
| 23:14.09 | TripleFFF2sdf | lol |
| 23:14.25 | MRH2 | triple - do it in 2 stages - stage 1 dial stage 2 and submit the options u need to agentcallbacklogin - this will cover passwords n stuff |
| 23:15.37 | MRH2 | sorry that is if u want to do it from the dialplan |
| 23:15.45 | eng1neer | on the latest cvs head, did cahnnel spy disapper or did it change? |
| 23:15.46 | TripleFFF2sdf | yeah |
| 23:15.55 | TripleFFF2sdf | i do manually for now |
| 23:15.59 | TripleFFF2sdf | as we all have same callerid |
| 23:16.05 | TripleFFF2sdf | so i cant use that as clallback number |
| 23:16.15 | TripleFFF2sdf | unless i create a sip entry ffor agent |
| 23:16.17 | TripleFFF2sdf | hmm |
| 23:16.35 | TripleFFF2sdf | wondering max time..i loged all agents off |
| 23:16.37 | TripleFFF2sdf | still on moh |
| 23:16.45 | TripleFFF2sdf | 1:40 and counting |
| 23:17.15 | TripleFFF2sdf | timeout = 15 |
| 23:17.32 | cj | bah. I don't understand why the config file parser isn't picking up the host, user and password fields |
| 23:17.40 | *** join/#asterisk anthm[tablet] (~anthm@rrcs-67-52-7-122.west.biz.rr.com) |
| 23:18.35 | TripleFFF2sdf | hmm 3:30 |
| 23:18.37 | TripleFFF2sdf | this sucks |
| 23:18.41 | TripleFFF2sdf | ill be on hold for ever |
| 23:18.48 | *** join/#asterisk mariogamboa (~sudaikdd@201.138.151.155) |
| 23:18.55 | mariogamboa | hi all |
| 23:19.18 | mariogamboa | i have a question about ignorepat |
| 23:19.38 | mariogamboa | this command only works with analog phone no with ip phones? |
| 23:21.38 | *** join/#asterisk _santiago_ (~santiago@63.245.86.173) |
| 23:21.43 | mariogamboa | is correct |
| 23:23.48 | Weezey | ... /ignore pat |
| 23:24.52 | tzafrir | cj, pastebin the file? (with modified user/pass) |
| 23:24.54 | mariogamboa | yes |
| 23:25.09 | *** join/#asterisk colinm_ (~colol@VDSL-130-13-8-95.PHNX.QWEST.NET) |
| 23:25.13 | mariogamboa | i have in my outbound context ignorepat => 9 |
| 23:25.46 | mariogamboa | but i see only works with analog phone with ip phone doesn't works? |
| 23:26.12 | *** join/#asterisk mut (WebChat@i.think.napoleon.dynamiteblows.com) |
| 23:26.14 | Weezey | depends on how the phone delivers the digits |
| 23:26.26 | mut | hardwire ya still around? |
| 23:26.34 | Weezey | Maybe it's more fore Zap FXSs? |
| 23:26.36 | hardwire | depends. |
| 23:26.42 | hardwire | whats up mut |
| 23:26.56 | mariogamboa | in this case the ip phone the dtmf is sip |
| 23:27.08 | mut | actually crap, i'll bbfew |
| 23:27.13 | mut | food jus got done cookin |
| 23:27.14 | hardwire | oh no you will not |
| 23:27.18 | hardwire | sit down and spit it out |
| 23:27.20 | hardwire | :) |
| 23:27.27 | mut | wanted to talk about movin |
| 23:27.36 | hardwire | heh |
| 23:29.44 | TripleFFF2sdf | asterisk is weird |
| 23:29.52 | TripleFFF2sdf | why would it send to queues if not agent loged in ? |
| 23:30.16 | wunderkin | change that in queues.conf |
| 23:30.42 | TripleFFF2sdf | joinempty = yes |
| 23:30.46 | TripleFFF2sdf | right im dumb |
| 23:30.57 | MRH2 | any way to match part of the callerid in the dialplan? I can't find an example - if only I can get the syntax around the test bit I think - gotoif ($["{$CallerId}" : test])?2:3 |
| 23:31.03 | *** join/#asterisk unixmonster (user@pcp986360pcs.northw01.in.comcast.net) |
| 23:31.52 | *** join/#asterisk DarthClue (~Headaches@adsl-70-244-228-14.dsl.tulsok.swbell.net) |
| 23:32.19 | Ariel_ | MRH2, look for on the wiki for exgirl friend |
| 23:32.35 | TripleFFF2sdf | weill |
| 23:32.46 | TripleFFF2sdf | i made it joinempty=no |
| 23:32.50 | TripleFFF2sdf | and reload app_Queues.so |
| 23:33.02 | TripleFFF2sdf | i called and got queued |
| 23:33.26 | TripleFFF2sdf | agents configured [0 online |
| 23:34.04 | Ariel_ | TripleFFF2sdf, do reload instead of reload app_queues.so |
| 23:34.22 | wunderkin | i think if you have dynamic members it wont work, or something like that |
| 23:35.57 | anthm[tablet] | exgirl friend or ex girlgriend lol kinda means 2 difft things |
| 23:36.18 | hardwire | hmm |
| 23:36.19 | Qwell | anthm[tablet]: heh |
| 23:36.21 | hardwire | this should be odd |
| 23:36.49 | anthm[tablet] | Qwell I heard you might be able to win the slashdot challange? |
| 23:37.09 | Qwell | anthm[tablet]: through bribery perhaps :p |
| 23:38.34 | MRH2 | damn i can't regexp use |
| 23:38.51 | Qwell | MRH2: You could probably do it using an AGI |
| 23:39.29 | hardwire | you think a PII 450 would be enough CPU to encode an mp3 stream via liveice as well as provide MoH of that mp3 stream? |
| 23:40.07 | anthm[tablet] | bribe you or them ? |
| 23:40.08 | anthm[tablet] | =D |
| 23:40.18 | Qwell | anthm[tablet]: both |
| 23:41.00 | anthm[tablet] | well you'd get a free pass to the conference that's fer shur |
| 23:41.21 | Qwell | anthm[tablet]: I'm not actually going to cluecon... |
| 23:41.28 | file[laptop] | and why not |
| 23:41.30 | anthm[tablet] | aww |
| 23:41.30 | MikeJ[Laptop] | you should.. |
| 23:41.34 | Qwell | airfare |
| 23:41.44 | file[laptop] | lousy excuse! |
| 23:41.45 | MikeJ[Laptop] | and you should for free.. then airfare would not be a big deal |
| 23:41.47 | MikeJ[Laptop] | hehe |
| 23:41.48 | Qwell | file[laptop]: indeed |
| 23:41.50 | MikeJ[Laptop] | drive? |
| 23:41.57 | Qwell | MikeJ[Laptop]: 2500 miles? :p |
| 23:42.02 | MikeJ[Laptop] | walk? |
| 23:42.07 | Qwell | (my wife HAS been considering a roadtrip though...) |
| 23:42.08 | Qwell | heh |
| 23:42.09 | MikeJ[Laptop] | where do you live? |
| 23:42.12 | Qwell | CA |
| 23:42.14 | Micc | those numbers at the end of ast_readstring before the "#" are those minimum and maximum numbers to read? |
| 23:43.06 | anthm[tablet] | how bout my new module that does call recording natively and even lets you append => |
| 23:43.19 | MRH2 | ok i am gonna try down the agi route thanks Qwell |
| 23:43.33 | anthm[tablet] | agent can have his own sound file with all his calls in it back to back *smile* |
| 23:43.53 | Qwell | hmm |
| 23:43.58 | Qwell | I need to write an agent dialplan |
| 23:44.16 | Qwell | "Press 1 for 'Have you tried rebooting the system?', press 2 for..." |
| 23:44.24 | SarahEmm | lol |
| 23:45.42 | SarahEmm | thankyou |
| 23:47.49 | gravemind | hrm |
| 23:47.55 | gravemind | pap2 is working okay now |
| 23:48.01 | gravemind | still waits 5-10 seconds before dialing out |
| 23:48.10 | gravemind | it must only dial out normal speed if you dial a full number |
| 23:51.35 | gravemind | yep, seems to ring immediately if you dial a full number - but i might just be meeting the timeout by dialing so many digits :P |
| 23:51.49 | cj | what is kewlstart? |
| 23:51.51 | cj | wiki? |
| 23:51.53 | cj | ~kewlstart |
| 23:52.23 | gravemind | kind of T1 signalling if im not mistaken. |
| 23:52.32 | anthm[tablet] | its for analog |
| 23:52.35 | cj | ah. so I shouldn't use it for analog lines? |
| 23:52.37 | cj | oh. |
| 23:52.50 | anthm[tablet] | its the normal default of most analog in us |
| 23:53.14 | cj | Hmm... I think I have my card set up right.. now I need to test it... |
| 23:53.30 | anthm[tablet] | its the the same as the other one only with disconnect detection etc |
| 23:53.32 | cj | how do I put up a SIP gateway so I can make POTS calls from X-Lite? |
| 23:53.59 | anthm[tablet] | the secret to tellign if you have it is if you have any phone with glowing buttons if it works on your line its kewlstart |
| 23:54.38 | cj | anthm[tablet]: that didn't make any sense... |
| 23:54.41 | DarthClue | glowing buttons? um...i would be a bit concerned about radiation at that point. |
| 23:54.50 | cj | SIP phone or analog phone? |
| 23:55.23 | gravemind | analog phone |
| 23:55.26 | gravemind | he means line-powered phones |
| 23:55.36 | gravemind | as opposed to wall-powered |
| 23:55.45 | gravemind | you know, the ones that work when the power goes out :) |
| 23:55.46 | cj | ah |
| 23:56.04 | cj | so if it works how? Plugged in to my FXS port on my card? |
| 23:56.26 | cj | I'm more interested in getting my FXO port working making outbound calls atm... |
| 23:59.15 | *** join/#asterisk mog_home (~mogorman@user-24-236-84-48.knology.net) |
| 23:59.45 | SarahEmm | anthm: err... not quite.. if you have a phone with glowing buttons and they blink when the other end hangs up, no? |
| 23:59.49 | SarahEmm | any line has power on it... |
