| 00:03.02 | Ariel_ | Drizzt321, try this setup then lets see what it does http://pastebin.ca/23041 |
| 00:03.21 | Drizzt321 | Ariel_: k |
| 00:03.35 | Ariel_ | I got to make some coffee |
| 00:04.15 | Drizzt321 | k |
| 00:07.00 | *** join/#asterisk Druken (n=druken@CPE00121716da99-CM000e5cde4ca2.cpe.net.cable.rogers.com) |
| 00:08.43 | *** join/#asterisk budah (i=1003@200.215.57.174) |
| 00:10.35 | *** join/#asterisk MikeJ__ (n=ircatjer@d14-69-8-30.try.wideopenwest.com) |
| 00:13.51 | *** join/#asterisk MGSsancho (n=sancho@207.215.249.181) |
| 00:14.11 | *** join/#asterisk Romik (n=romik_@84.77.154.154) |
| 00:16.06 | Drizzt321 | Ariel_: umph. |
| 00:16.11 | Drizzt321 | Ariel_: you back? |
| 00:16.34 | Ariel_ | yes |
| 00:17.06 | Drizzt321 | no success |
| 00:17.08 | Ariel_ | Family room, next to kitchen, not very far. |
| 00:17.13 | Drizzt321 | ah |
| 00:17.15 | Ariel_ | ok what error are you getting now. |
| 00:17.41 | Drizzt321 | not errors, exactly. still the same 404 error, but I was just looking through the sip debug trace when I try to make a call |
| 00:18.53 | Drizzt321 | the last packet that gives the 404, looks like its trying to initialize a call, but when it goes to 'look up' the number I am trying to dial, it can't find it. but it looks like its trying to look it up from itself, not trying to look it up through BV |
| 00:19.44 | Drizzt321 | want me to pastebin it? |
| 00:20.44 | Druken | Ariel_: sounds like my place... my computer is right beside one of the kitchen doors |
| 00:21.21 | Drizzt321 | Druken, Ariel_ : heh, yea, but at least your fridge isn't in the same room, but the kitchen is down the hall, and the bathroom is shared. gah, I hate living in the dorms |
| 00:21.44 | Drizzt321 | Ariel_: http://pastebin.ca/23044 |
| 00:22.25 | *** join/#asterisk syle2 (n=blag@unaffiliated/syle) |
| 00:22.37 | Ariel_ | kitchen leads into my family room. It has a bar like counter. Which I have my laptop on the side of the family room. It's fairly easy to watch the kids. |
| 00:23.21 | Drizzt321 | sweet |
| 00:23.30 | *** join/#asterisk MikeAG (n=mgross@24.152.200.217) |
| 00:23.51 | Ariel_ | exten => 2001,2,Dial/sip/2001,60) should be exten => 2001,2,Dial(sip/2001,60) |
| 00:24.00 | Drizzt321 | ah, ok. I thought that looked odd |
| 00:24.08 | Ariel_ | can you via another phone call into your box? |
| 00:24.21 | Darwin35 | http://pastebin.ca/23045 ok here you all go take a look and hope it helps |
| 00:24.45 | Drizzt321 | Ariel_: no, all I get is directed immediately to voicemail |
| 00:25.01 | Darwin35 | ariel look at the pastebin |
| 00:25.05 | Darwin35 | it will help you |
| 00:25.50 | Darwin35 | I will post more as I fix things |
| 00:25.59 | Darwin35 | and ask that you might doi same |
| 00:26.47 | Ariel_ | OK so your trying to get people to use a standard way to write extensions.conf |
| 00:27.02 | Drizzt321 | Darwin35: want to take a look at mine and figure out what I'm doing wrong? |
| 00:27.16 | Drizzt321 | Darwin35: http://pastebin.ca/23041 |
| 00:27.31 | Darwin35 | I think stardiziiing the file would help |
| 00:27.34 | Darwin35 | but no |
| 00:27.48 | Darwin35 | I just put it out there for people to read and learn from |
| 00:28.02 | Darwin35 | I think thou the layout is very clean and easy to use |
| 00:28.50 | Darwin35 | if you dont like thats fine |
| 00:28.56 | Ariel_ | Drizzt321, is this the number you dialed? 2285963592 |
| 00:29.01 | Drizzt321 | Darwin35: well, I think I will take, and examine it, and probably learn something from it...except first I need to get some basic functionality working |
| 00:29.05 | Darwin35 | but hope it might make configuring easier for all |
| 00:29.10 | Drizzt321 | Ariel_: well, I put 12285963592 into xlite, yes |
| 00:29.22 | Darwin35 | its all there |
| 00:29.36 | Drizzt321 | Ariel_: that happens to be my cell, you'll probably get a busy, cause its a mississippi number, I keep meaning to go get it changed to a local number... |
| 00:29.39 | *** join/#asterisk bkw__ (n=brian@adsl-69-154-1-104.dsl.tulsok.swbell.net) |
| 00:29.48 | Ariel_ | it did not take the 1 |
| 00:29.50 | Darwin35 | the only big part not fully functioning is my macrostdexten-new |
| 00:29.56 | Drizzt321 | hrm |
| 00:30.39 | Drizzt321 | Ariel_: $#UY(*#@$U*#@)( |
| 00:30.42 | Drizzt321 | stupid xlite |
| 00:30.50 | Drizzt321 | it had 1 as the dial prefix in the sip proxy settings |
| 00:30.54 | Drizzt321 | I took that out, it dials... |
| 00:30.56 | Ariel_ | Drizzt321, it did not match a dial rule you have 1NXXNXXXXXX |
| 00:31.19 | Ariel_ | now your getting some place |
| 00:31.21 | Drizzt321 | Ariel_: yea...I'll have to make a marco or something that will take that, and put the 1 on it |
| 00:31.37 | Ariel_ | yes it's part of your dialing rules |
| 00:31.39 | Drizzt321 | Ariel_: yup :) |
| 00:31.43 | Ariel_ | <PROTECTED> |
| 00:31.47 | Drizzt321 | exactly |
| 00:32.08 | Drizzt321 | but...it still says I am busy, when trying to dial from my cell to my SIP number :( |
| 00:32.31 | Ariel_ | ok that is another issue |
| 00:32.38 | Drizzt321 | yea |
| 00:32.44 | Ariel_ | your behind a firewall/nat correct |
| 00:33.12 | Drizzt321 | asterisk is on my firewall machine, so its sorta not behind it |
| 00:33.19 | Drizzt321 | behind the firewall part, yes, but not nat |
| 00:33.26 | Ariel_ | really |
| 00:33.33 | Drizzt321 | although as far as I know I have unfirewalled the necessary ports |
| 00:33.34 | Drizzt321 | yes |
| 00:34.03 | Drizzt321 | I've read that sometimes there are issues if its behind a nat, so I simply put it on the nat machine, so it could operate directly on the external ip |
| 00:34.17 | Ariel_ | ok so you have port udp 5060 open and 10,000 to 20,000 udp for the sound open? |
| 00:34.30 | Drizzt321 | yea, let me doublecheck that I do |
| 00:34.35 | *** join/#asterisk JDLSpeedy_ (i=joe@pdpc/supporter/sustaining/JDLSpeedy) |
| 00:35.33 | Ariel_ | when you make the call to your box make sure you have sip debug on and see what it says. |
| 00:36.01 | Drizzt321 | Ariel_: yup, they're open |
| 00:36.31 | Drizzt321 | Ariel_: I just did so, it seems its sending 488, not acceptable here back out, which gives me the busy signal |
| 00:36.48 | *** join/#asterisk mick3 (n=rebel@sdn.infometrics.co.nz) |
| 00:37.23 | *** join/#asterisk litage (n=nick@203.201.96.147) |
| 00:37.32 | kiwnix | for FastAGI in java... what you will recomend, Asterisk-java or OrderlyCalls? |
| 00:37.41 | kiwnix | (simple apps) |
| 00:37.58 | fugitivo | java != fast |
| 00:37.59 | Ariel_ | Drizzt321, ok so your box is the one that is rejecting the call |
| 00:38.17 | Drizzt321 | yup, seems that way |
| 00:39.06 | kiwnix | fugitivo: ok... AGI over TCP :D |
| 00:39.08 | Darwin35 | because he hads not got his context setup |
| 00:39.25 | Darwin35 | he needds to read the pastebin I put up and learn from it |
| 00:39.28 | Drizzt321 | Darwin35: I was just looking that over, I thought that |
| 00:39.34 | Darwin35 | it will answer all his questions |
| 00:39.56 | Drizzt321 | Darwin35: right...but I would like to be able to use it sooner than a day or two from now once I somewhat understand yours :P |
| 00:40.23 | Darwin35 | well if you use the one I pasted and edit it . it will work |
| 00:40.33 | Darwin35 | I use to use broadvoice |
| 00:40.45 | Darwin35 | its fully functional |
| 00:40.54 | Darwin35 | then read and learn from it |
| 00:41.10 | Drizzt321 | Darwin35: hows it working in the longish run? good provider? |
| 00:41.30 | Ariel_ | Drizzt321, bv is ok they have there issues from time to time. |
| 00:41.41 | Darwin35 | I changed over to a iax provider and had much more luck |
| 00:41.47 | Drizzt321 | ahh |
| 00:41.56 | Darwin35 | but BV is a ok company |
| 00:42.02 | Drizzt321 | there a better provider out there I might want to switch to? |
| 00:42.04 | Darwin35 | i use TelIax |
| 00:42.21 | Drizzt321 | I was interested in BV cause its got the cheap $6/mo 100 minutes outbound started BYOD plan |
| 00:42.36 | fugitivo | having problems with broadvoice? |
| 00:42.53 | Drizzt321 | fugitivo: not particularly, at least, I haven't gotten it to work yet, if thats a problem in and of itself |
| 00:42.56 | Darwin35 | dritz give me a min |
| 00:43.02 | Drizzt321 | fugitivo: working on getting my setup properly setup, lol |
| 00:43.18 | fugitivo | i have a working config, at least it was working when i used bv |
| 00:43.36 | Ariel_ | Drizzt321, add a context called [default] and put there include => from-broadvoice just for a test. |
| 00:43.39 | fugitivo | where is your conf? |
| 00:43.42 | Drizzt321 | fugitivo: well, we've managed to get my outbound calling working, now I gotta work on my inbound |
| 00:43.50 | Drizzt321 | kk |
| 00:43.50 | fugitivo | pastebin your conf |
| 00:43.58 | Ariel_ | fugitivo, he as |
| 00:44.02 | fugitivo | where |
| 00:44.05 | Ariel_ | pastebin.ca |
| 00:44.13 | fugitivo | :) |
| 00:44.21 | Ariel_ | http://pastebin.ca/23041 |
| 00:44.24 | Ariel_ | is one of them |
| 00:44.37 | Drizzt321 | Ariel_: nope, still says busy |
| 00:44.44 | fugitivo | you should not use friend |
| 00:44.46 | fugitivo | use peer |
| 00:44.46 | *** join/#asterisk [Airwolf] (n=airwolf@attilla.nl) |
| 00:45.21 | Ariel_ | fugitivo, your right but right now lets get him working |
| 00:45.38 | fugitivo | you have a typo, it's authname, you have authnam |
| 00:45.46 | Drizzt321 | erm? |
| 00:45.46 | Darwin35 | I am looking for my old bv config |
| 00:45.53 | Darwin35 | to setup for you\ |
| 00:46.05 | Drizzt321 | ah, very true |
| 00:46.24 | fugitivo | everything else seems ok, does the context from-broadvoice exists? |
| 00:46.31 | Drizzt321 | yup |
| 00:46.45 | Ariel_ | yup as in?? |
| 00:46.58 | fugitivo | ok, i see it |
| 00:47.00 | Drizzt321 | err, that was to fugitivo |
| 00:47.03 | Drizzt321 | Ariel_: no, didn't work |
| 00:48.03 | fugitivo | are you behind nat? |
| 00:48.29 | Drizzt321 | fugitivo: no, firewall yes, but nat no. at least, my asterisk server isn't, and yes, I have 5060 and 10000-20000 unfirewalled |
| 00:48.30 | Drizzt321 | udp |
| 00:48.42 | fugitivo | Drizzt321: set qualify to no |
| 00:48.57 | Ariel_ | Drizzt321, ok make in the default an exten => yourphonenumber,1,dial(Sip/2001,60) |
| 00:48.57 | Drizzt321 | fugitivo: whats that do? |
| 00:50.32 | Darwin35 | dritz whats your email |
| 00:50.32 | fugitivo | incoming is not working or outgoing? |
| 00:50.49 | *** part/#asterisk netnameus (n=netnameu@pcp05000344pcs.shrpsr01.tn.comcast.net) |
| 00:51.09 | Ariel_ | incoming |
| 00:51.10 | Drizzt321 | Darwin35: drizzt321@shackmail.com |
| 00:51.18 | fugitivo | oh |
| 00:51.32 | Drizzt321 | hmm... |
| 00:51.34 | fugitivo | one test |
| 00:51.43 | Drizzt321 | I see No Compatable Codecs in the messages output |
| 00:51.44 | fugitivo | change the default context to from-broadvoice |
| 00:51.49 | Drizzt321 | at the time I tried calling in |
| 00:52.00 | Drizzt321 | the /var/log/asterisk/messages that is |
| 00:52.57 | Darwin35 | I have a sip.conf and a extensions.conf |
| 00:53.04 | Darwin35 | setup for broadvoice |
| 00:53.21 | Drizzt321 | k |
| 00:54.20 | fugitivo | Drizzt321: first change de default context, just for test, then, can you paste the entire line of that error? |
| 00:55.29 | Drizzt321 | Sep 15 20:51:08 NOTICE[15933]: No compatible codecs! |
| 00:55.30 | Darwin35 | ok sent |
| 00:55.44 | Darwin35 | you need to put your register line in the sip.conf |
| 00:55.52 | Drizzt321 | yup, thats done |
| 00:55.53 | fugitivo | Drizzt321: did you try changing the default context? |
| 00:56.02 | fugitivo | Drizzt321: under [general] |
| 00:56.08 | fugitivo | Drizzt321: set it to from-broadvoice |
| 00:56.16 | Darwin35 | and you need to edit extensions.conf and and change the dial lines |
| 00:56.25 | Drizzt321 | fugitivo: in sip.conf? |
| 00:56.29 | fugitivo | Drizzt321: yes |
| 00:56.43 | Darwin35 | dritz the sip.conf I just sent will work |
| 00:56.47 | Darwin35 | its all set |
| 00:57.03 | Darwin35 | jyst fill in the needed info |
| 00:57.13 | Darwin35 | your accoutt info in the sip.conf |
| 00:57.26 | Drizzt321 | cool. whenever it gets put into my mailbox |
| 00:57.31 | Drizzt321 | probably take a few minutes |
| 00:57.42 | fugitivo | oh well, try the context thing meanwhile |
| 00:58.05 | Drizzt321 | fugitivo: yea, I set context=from-broadvoice |
| 00:58.13 | Drizzt321 | got that no compatable codec line again |
| 00:58.16 | Drizzt321 | in the messages |
| 00:58.21 | Drizzt321 | not the console |
| 00:58.38 | fugitivo | ok |
| 00:58.53 | fugitivo | set disallow=all allow=ulaw in the broadvoice account |
| 01:00.23 | Drizzt321 | Darwin35: ok, trying them out |
| 01:00.36 | Darwin35 | read and edit them first |
| 01:00.41 | Darwin35 | add your info |
| 01:01.04 | Darwin35 | your on cvs head right |
| 01:01.20 | Drizzt321 | yup |
| 01:01.23 | Darwin35 | ok |
| 01:01.33 | Darwin35 | good this file is writen for head |
| 01:01.52 | Darwin35 | the dial line in extensions.conf need to be fixed |
| 01:02.13 | Darwin35 | I had the old lines not the new ones |
| 01:04.00 | Darwin35 | I know they work because I am using the same files but setup for teliax |
| 01:04.51 | Darwin35 | brb |
| 01:06.09 | Drizzt321 | Darwin35: erm....asterisk is complaining about alot of invalid priority 'n' in alot of places |
| 01:06.47 | fugitivo | it's not a good idea to just use another conf... it's good when you detect the error and know how to fix it |
| 01:07.00 | Darwin35 | hmm mine does not are you sure your on head |
| 01:07.15 | Drizzt321 | hrm? |
| 01:07.18 | Drizzt321 | the one you sent me |
| 01:07.38 | Drizzt321 | extensions.conf |
| 01:07.46 | Drizzt321 | rather, new-extensions.conf was the name you had it |
| 01:08.58 | Darwin35 | yes |
| 01:09.07 | Darwin35 | I am going over it right now |
| 01:09.12 | Darwin35 | hold a min |
| 01:09.58 | *** join/#asterisk Moc_ (n=mochouin@219.155-ppp.3menatwork.com) |
| 01:10.18 | Drizzt321 | holy crap |
| 01:10.21 | Drizzt321 | i fixed it |
| 01:10.42 | Drizzt321 | you know that codec issue that I mentioned earier |
| 01:11.02 | Drizzt321 | well, I added allow=ulaw allow=gsm into the [sip.broadvoice.com] in sip.conf...like a charm |
| 01:11.29 | fugitivo | you didn't add disallow=all allow=ulaw as i told you... |
| 01:11.30 | Darwin35 | it shold hav ebeen in the sip.conf I sent you |
| 01:12.33 | *** join/#asterisk drumkilla_laptop (n=russell@asterisk/developer-and-stable-maintainer/drumkilla) |
| 01:12.33 | *** mode/#asterisk [+o drumkilla_laptop] by ChanServ |
| 01:12.41 | *** join/#asterisk clinthome (n=clinthom@va-chrvlle-cad1-bdgrp5-8d-209.chvlva.adelphia.net) |
| 01:13.07 | MrCh|cken | Hi Rob111 |
| 01:13.35 | MrCh|cken | sorry . . .Hi Rob! |
| 01:13.39 | Darwin35 | driz do a version from the cli |
| 01:14.09 | Darwin35 | if its compalining about n then i dont think your on head |
| 01:14.17 | Darwin35 | show version |
| 01:14.51 | mick | so, I'm having many problems with asterisk |
| 01:15.01 | mick | Sep 16 12:21:14 WARNING[13548]: app_voicemail_pg.so: load_module failed, returning -1 |
| 01:15.01 | mick | Sep 16 12:21:14 WARNING[13548]: Loading module app_voicemail_pg.so failed! |
| 01:15.02 | Drizzt321 | Darwin35: Asterisk 1.0.7-BRIstuffed-0.2.0-RC7k |
| 01:15.13 | Darwin35 | ok your not on head |
| 01:15.16 | fugitivo | what is that? |
| 01:15.20 | fugitivo | BRIstuffed |
| 01:15.29 | Drizzt321 | its the debian packages |
| 01:15.35 | Darwin35 | driz are you on bsd |
| 01:15.41 | Darwin35 | ahh debian |
| 01:15.52 | syle | mick, remove your module directory before doing a make install |
| 01:15.55 | Veto | 1.2.0 beta 1 working pretty well for people? Thinking about installing on my small pbx. |
| 01:15.57 | Drizzt321 | yea |
| 01:16.28 | Darwin35 | drizz you have to go threw and chaneg all the ,n to nm,brs |
| 01:16.30 | mick | yeah see the thing is, I haven't touched it (mostly) |
| 01:16.42 | Drizzt321 | Darwin35: yea, I figured |
| 01:16.47 | fugitivo | _pg ? voicemail in postgres? |
| 01:16.49 | Darwin35 | my extensions.conf is writen for cvs head |
| 01:17.06 | mick | so my next question is, how do I create a trunk? |
| 01:17.09 | Darwin35 | that or compile cvshead and install it |
| 01:17.11 | *** join/#asterisk sneak (n=sneak@64.220.234.21.ptr.us.xo.net) |
| 01:19.34 | Darwin35 | sorry drizz you also have to change all the Set($BD to DBPUT and the Set( to DBGET |
| 01:19.36 | mick | could anyone point me to a howto for configuring a simple voip provider, and routing calls via that provider? |
| 01:19.59 | mick | I'm sort of familiar how to create extensions in extensions.conf, but the calls aren't working (keep getting 404 in my softphone) |
| 01:20.03 | Darwin35 | SET($BD/DB |
| 01:20.31 | Veto | there was a ifdef in <1.0.9 to make Sipura f726 work properly, anyone know where it is/was? i forgot. |
| 01:20.38 | MrCh|cken | <PROTECTED> |
| 01:20.40 | Veto | err, g726 |
| 01:20.40 | Drizzt321 | mick: what softphone? xlite? |
| 01:20.47 | mick | Drizzt321: yep |
| 01:21.34 | Drizzt321 | mick: try setting the Dial Prefix in the sip proxy settings to blank |
| 01:21.51 | mick | the same thing happens on my hard phone too though |
| 01:22.02 | Drizzt321 | mick: it seems to strip that off so that asterisk won't receive the 1, if you have that set to 1, which end up not matching the exten |
| 01:23.04 | *** join/#asterisk clinthome (n=clinthom@va-chrvlle-cad1-bdgrp5-8d-209.chvlva.adelphia.net) |
| 01:23.49 | mick | now I can't even dial other extensions :| |
| 01:24.01 | Drizzt321 | mick: oh. umph. I dunno then |
| 01:24.50 | mick | :| |
| 01:24.56 | mick | asterisk seems awfully hard to configure |
| 01:25.04 | fugitivo | nah |
| 01:25.05 | Vco | ? |
| 01:25.22 | fugitivo | it's like programming your vcr |
| 01:25.28 | mick | point me to an easy to read howto then |
| 01:25.33 | Vco | or a really simple tax form... |
| 01:25.35 | fugitivo | ~docs |
| 01:25.45 | jbot | rumour has it, docs is Documentation can be found at http://www.digium.com/index.php?menu=documentation or http://www.digium.com/handbook-draft.pdf or http://www.voip-info.org/wiki-Asterisk or http://www.asteriskdocs.org or http://www.oreilly.com/catalog/asterisk |
| 01:25.50 | fugitivo | ~ping |
| 01:25.55 | jbot | pong |
| 01:26.06 | fugitivo | nice ping |
| 01:27.22 | Darwin35 | Drizz go cvs co head |
| 01:27.29 | Darwin35 | compile and install it |
| 01:27.38 | Darwin35 | then use the files I sent you |
| 01:27.53 | Darwin35 | you might have to update some pkgs |
| 01:27.58 | Darwin35 | but its worth it |
| 01:29.29 | smcmahon | someone want to define what this means if they can? "Dont know how to set condition 18 on channel Zap/1-1" |
| 01:29.30 | smcmahon | What is condition 18 ? |
| 01:30.45 | hardwire | does anybody else here execute an Answer() before dialing out of the local/ld trunk |
| 01:30.49 | mick | exten => _0800.,1,Dial(SIP/${EXTEN:1}@sipserve,30,r) |
| 01:30.52 | mick | does that look correct? |
| 01:30.56 | hardwire | to better implement call waiting for the sip client thats making the call? |
| 01:30.58 | mick | I have 'sipserve' defined in sip.conf |
| 01:31.08 | hardwire | since its a sip client.. it obviously isn't a modem. |
| 01:31.22 | mick | what else do I need to ensure calls to 0800-something are routed through that voip provider? |
| 01:32.04 | mick | basically what I want to do... is route certain tollfree calls via a provider, and anything else out my pstn card |
| 01:32.21 | hardwire | you are on the right path |
| 01:32.32 | hardwire | don't see why you would need anything else |
| 01:33.55 | ixx | mick, you can create a [to-tollfree] or something containing the _800. you have and then another for all the rest... I assume all the rest really means NXXXXX and 1NXXNXXXXX |
| 01:33.59 | Veto | Hmm-home, on transfers the first ring includes some horrible screeching sound. additonal rings are normal. |
| 01:34.31 | Drizzt321 | Darwin35, Ariel_, fugitivo: this is really odd, and wrong. after I make an outgoing call, asterisk dies. it doesn't segfault, it just exits. |
| 01:35.02 | ixx | then have some section for the users that can dial out to those areas.. and do include => to-tollfree and include => to-whatever |
| 01:36.01 | ixx | you can shove everything into one context but I recommend using different context for the different outgoing/incoming call types |
| 01:36.20 | Drizzt321 | Darwin35, Ariel_, fugitivo: oh wait, it does segfault, I get: == Spawn extension (dial-out, 19784187300, 1) exited non-zero on 'SIP/2001-5017' |
| 01:36.57 | mick | /var/log/asterisk/full doesn't show much etiher |
| 01:39.32 | ixx | taxes? taxes are much nastier than asterisk config |
| 01:39.56 | ixx | it is a different mindset though... for most people |
| 01:40.14 | sudhir492 | anyone using Queues here? |
| 01:40.21 | Vco | yea...don't feel like your getting bent over by your asterisk system |
| 01:40.26 | *** join/#asterisk DarthClue (n=DarthClu@adsl-70-244-228-14.dsl.tulsok.swbell.net) |
| 01:41.40 | Drizzt321 | anyone know why asterisk would segfault when a call ends? either incoming, or outgoing call, it just segfaults as soon as the call is shut down |
| 01:41.47 | mick | ixx: yep |
| 01:41.58 | mick | hardwire: ok, thanks |
| 01:42.05 | hardwire | yup |
| 01:42.59 | fugitivo | Drizzt321: because you're using an ugly package :) |
| 01:43.14 | Drizzt321 | fugitivo: ? |
| 01:43.19 | *** join/#asterisk apardo (n=apardo@23.Red-83-44-179.pooles.rima-tde.net) |
| 01:43.26 | fugitivo | you're using a debian package, right? |
| 01:43.30 | drumkilla_laptop | Drizzt321: Asterisk v1-0 is up to version 1.0.9 |
| 01:43.32 | Drizzt321 | fugitivo: yea |
| 01:43.36 | drumkilla_laptop | many things have been fixed ... |
| 01:43.38 | hardwire | hmm |
| 01:43.40 | hardwire | this shuold be odd |
| 01:43.42 | hardwire | nm. |
| 01:43.44 | fugitivo | Drizzt321: that's the reason, compile cvs |
| 01:43.53 | drumkilla_laptop | and your version is patched by code not in the main tree |
| 01:44.10 | Drizzt321 | Druken: oh |
| 01:44.22 | Drizzt321 | rather annoying |
| 01:44.31 | drumkilla_laptop | if you want to use 1.0, check out version 1.0 from cvs (cvs co -r v1-0 asterisk) |
| 01:44.43 | Drizzt321 | yea |
| 01:44.47 | Drizzt321 | darnnit |
| 01:44.52 | mick | each time I try to access voicemail, it says login incorrect |
| 01:45.11 | bkw__ | hrm |
| 01:45.19 | bkw__ | i'm trying to figure out how to hairpin a call thru a TNT |
| 01:45.28 | fugitivo | mick: are you using the speaker? |
| 01:45.38 | hardwire | bkw__: hairpin.. tnt? |
| 01:45.42 | mick | fugitivo: sorry? |
| 01:45.46 | mick | fugitivo: speaker? |
| 01:46.39 | mick | hm, seems to work now |
| 01:46.42 | mick | this is so confusing :| |
| 01:47.05 | Drizzt321 | fugitivo, drumkilla_laptop: would you suggest 1.2 beta? or 1.0cvs? |
| 01:47.06 | fugitivo | mick: yes, hands free speaker |
| 01:47.15 | *** join/#asterisk viLeR (i=1000@ip-47-252.telesat.com.co) |
| 01:47.19 | hardwire | MAX TNT. |
| 01:47.29 | drumkilla_laptop | Drizzt321: it's up to you, really ... |
| 01:47.43 | fugitivo | Drizzt321: if it's not a production system, go with cvs head, or 1.2 beta |
| 01:48.02 | Drizzt321 | drumkilla_laptop: yea, I'm trying to think. this isn't production, as in a company, but at the same time, its not necessarily 100% test |
| 01:48.16 | Drizzt321 | ah heck, I can always remove, and get 1.0cvs |
| 01:48.40 | sudhir492 | Is there a way to restrict calls from going to busy extensions in queues? |
| 01:48.44 | drumkilla_laptop | if you're not really worried, go with 1.2beta |
| 01:48.50 | drumkilla_laptop | help test it for us, hehe |
| 01:49.01 | Drizzt321 | yup |
| 01:49.12 | drumkilla_laptop | it should be pretty stable right now |
| 01:49.15 | Drizzt321 | now, to clean up and purge my deb asterisk packages |
| 01:49.32 | kiwnix | when is aproximately the release of 1.2? (week-span... or month span)... i mean it's worth of it to use 1.2 new capabilities in a system that will be in production in 1 or 1.5 moths? |
| 01:49.40 | Drizzt321 | after saving my current sip.conf and extensions.conf of course, though I probably will end up refashioning them anyways |
| 01:49.49 | Veto | i've just upgraded a small production envrionment to 1.2b1 and so far it's working fine...but I haven't tested extensively. |
| 01:50.00 | DarthClue | drumkilla_laptop, is 1.2beta just cvs head? |
| 01:50.11 | Veto | dont' know if that helps Drizzt321 |
| 01:50.26 | Drizzt321 | Veto: well, sounds good enough to me |
| 01:50.51 | Veto | only issue i'm having is this horendous screech on right at a transfer...but had that in 1.0.9 as well. |
| 01:50.52 | Drizzt321 | Veto: since the debian patched 1.0.7 segfaults whenever I end a call, so it can't be worse than that |
| 01:50.55 | drumkilla_laptop | DarthClue: yeah, an image of it |
| 01:51.48 | DarthClue | well, i'll be setting up a couple systems in the next few days that will be using cvs-head, and it will be tested heavily. i'll try to report bugs if i can. |
| 01:52.53 | Veto | anyone else experienced the horrible warble/screech at a transfer? |
| 01:53.03 | Katty | :> |
| 01:54.14 | Katty | scooby doo, where are you? |
| 01:54.29 | Darwin35 | ok Drizz hope the files work for you |
| 01:54.32 | Darwin35 | let me know |
| 01:54.44 | Katty | DarthClue: :> |
| 01:55.19 | Darwin35 | ok the ricekrisp treats are done |
| 01:55.21 | Darwin35 | yes |
| 01:55.41 | Darwin35 | and the choc milk is cold |
| 01:58.30 | Katty | :< |
| 01:58.46 | Katty | oh. tomorrow is friday. |
| 01:58.54 | syle | is it |
| 01:59.00 | syle | kewl |
| 01:59.07 | file | dang nabbit |
| 01:59.10 | file | mentally I'm an hour ahead |
| 01:59.29 | Katty | goshdangitanyhow, get your head out of the future. |
| 01:59.30 | Drizzt321 | drumkilla_laptop: for 1.2, I still need to grab the zaptel and libpri, right? |
| 01:59.35 | DarthClue | yep. and I'm gonna be hardly working. I think they have me down for a football run driving the band instruments. |
| 01:59.43 | Drizzt321 | drumkilla_laptop: ah, nm, I found the links |
| 01:59.46 | file | Katty: sillyness |
| 02:00.09 | syle | file shaves the muff |
| 02:00.11 | Katty | that'll teach you. |
| 02:00.26 | file | yay break |
| 02:00.30 | DarthClue | hey file, can you tell me the lottery numbers since you are so far in the future? i'll split it with ya. |
| 02:01.20 | file | nope |
| 02:01.23 | file | I'm afraid not |
| 02:01.46 | MikeJ__ | shaves the muff? |
| 02:01.48 | MikeJ__ | uhhhhh |
| 02:02.20 | Katty | :> |
| 02:04.33 | Katty | :< |
| 02:04.54 | Katty | file: don't make me sit on you again. |
| 02:05.14 | MikeJ__ | this is getting.. ummmm... disturbing |
| 02:06.10 | DarthClue | now where is wikibob, i need something defined... |
| 02:06.10 | Katty | can't be disturbing. Hmmhesays isn't here. |
| 02:06.10 | DarthClue | MikeJ__, um, no. this is just like cluecon, only, nobody really gets hurt. |
| 02:06.10 | DarthClue | oh, and we all drink alone. |
| 02:06.21 | Katty | and Katty doesn't hide in her room all night (= |
| 02:06.54 | DarthClue | yeah, well, with the way bkw was shaking hands, i can't say i blame you for hiding. |
| 02:07.01 | Katty | teehee! |
| 02:07.55 | DarthClue | ya know, it's kinda cold in here....first time it's been this cool in a long time. 62 degrees and dropping, yah! |
| 02:08.58 | Hmm-home | argh Got SIP response 400 "Invalid message-summary" |
| 02:09.05 | Hmm-home | wtf is up with that |
| 02:09.26 | MikeJ__ | let me check.. |
| 02:09.31 | MikeJ__ | 404 not found ;) |
| 02:09.38 | MikeJ__ | from what? |
| 02:09.49 | Hmm-home | asterisk I think its from the mwi |
| 02:09.54 | Katty | Hmm-home: you were having that problem earlier when you called right? |
| 02:10.04 | kiwnix | if i'm interested in giving information to a closed bug... should i just reopen it with comments? |
| 02:10.11 | Katty | Hmm-home: right before i abandoned you and went home. |
| 02:10.18 | kiwnix | s/closed/suspended/ |
| 02:10.24 | MikeJ__ | Hmm-home, that just changed arond a bit the other night |
| 02:10.39 | MikeJ__ | kiwnix, what bug? |
| 02:10.50 | kiwnix | 3874 -> http://bugs.digium.com/view.php?id=3874 |
| 02:11.03 | file | Hmm-home!!! |
| 02:11.08 | Hmm-home | yo file |
| 02:11.10 | kiwnix | on 1.0.9 it dont work too |
| 02:11.15 | Hmm-home | what change MikeJ__? |
| 02:11.30 | Hmm-home | what changed I should say |
| 02:11.50 | MikeJ__ | the order of the headers for those mwi notifications to be rfc compliant |
| 02:12.04 | mick | so, now I'm getting this back from my voip provider: |
| 02:12.07 | Hmm-home | shiat |
| 02:12.12 | mick | Sep 16 14:11:31 VERBOSE[14304]: -- Got SIP response 483 "Too Many Hops" back from x |
| 02:12.18 | mick | what does it mean? what should I do? |
| 02:12.26 | MikeJ__ | put items in RFC-specified order (issue #5217) |
| 02:12.33 | kiwnix | MikeJ__: it don't work with 1.0.9 and CID is not received too :-/ |
| 02:12.38 | Hmm-home | thats probably why i'm getting that message back then |
| 02:12.47 | Hmm-home | have they always been out of order? |
| 02:13.05 | MikeJ__ | kiwnix, you want to comment that a closed bug that is not getting addressed by the developer is broken? |
| 02:13.11 | MikeJ__ | do you have fixes for it? |
| 02:13.44 | MikeJ__ | Hmm-home, yes... well.. there is finally an rfc on it I guess. but look at the bug for more details.. |
| 02:14.10 | kiwnix | MikeJ__: no, im just saying that i'm in spain, and i can give more information, if giving more information will improve the chances of getting the bug resolved, i can help |
| 02:14.11 | MikeJ__ | Hmm-home, well, revert it locally and see what happens |
| 02:14.30 | MikeJ__ | kiwnix, well... ummm... |
| 02:14.56 | Hmm-home | i don't have time to do it, that is the problem |
| 02:15.01 | MikeJ__ | I think without a patch, no one is really going to look at it to tell you the truth |
| 02:15.03 | Hmm-home | i'm leaving in the morning |
| 02:15.16 | MikeJ__ | no one is offering it up. |
| 02:15.54 | MikeJ__ | a bounty perhaps??? |
| 02:16.03 | kiwnix | ok :D, then i will try to contact the reporter, or try to adapt the patch to HEAD (there is a working patch for 1.0.9) |
| 02:16.54 | kiwnix | MikeJ__: i can suggest it to my boss, but we are very resource-limited :-( (I hope he accepts) (What do you think a good bounty will be?) |
| 02:17.16 | MikeJ__ | if you have a working patch for head, by all means, either find a bug marshall in #asterisk-bugs to reopen for you, or just open a new bug, and associate it with that bug. |
| 02:17.38 | MikeJ__ | kiwnix, a good bounty is the one big enough to get somone to do it! |
| 02:17.46 | kiwnix | MikeJ__: thanks a lot for the help :) |
| 02:17.48 | MikeJ__ | I don't know.. you might want to speak to digium.. |
| 02:18.11 | MikeJ__ | see if they are willing to do it as it is in direct support of selling their cards in spain |
| 02:18.40 | kiwnix | good idea :), thankyou very much |
| 02:18.53 | *** join/#asterisk mhnoyes (n=mhnoyes@user-2ivfmvb.dialup.mindspring.com) |
| 02:19.32 | smcmahon | Anyone know how to report a busy signal after a sip response of 486 busy here ? |
| 02:19.32 | MikeJ__ | sorry I wasn't more help |
| 02:19.46 | MikeJ__ | report to what? |
| 02:20.52 | smcmahon | Report it to a sip phone ... you know busy signal instead of a rapid busy |
| 02:22.29 | MikeJ__ | http://www.voip-info.org/tiki-index.php?page=Asterisk+cmd+Busy |
| 02:22.51 | Darwin35 | asterisk needs a way to identify with caller id internal nmbr vrs extenal nmbr |
| 02:23.10 | smcmahon | lDarwin35 : Ya think |
| 02:23.27 | MikeJ__ | use this to check ... --> http://www.voip-info.org/tiki-index.php?page=Asterisk+variable+DIALSTATUS |
| 02:23.28 | Darwin35 | so when you call outside you office it gives the full nmbr + exten and internal calls only get the localexten |
| 02:23.53 | FuriousGeorge | correction, when i uncomment i cant call out, but i can receive calls. when commented i can receive calls but obviously cant call out |
| 02:23.54 | FuriousGeorge | http://pastebin.ca/23034 |
| 02:23.59 | MikeJ__ | Darwin35, you can do all hat in dialplan |
| 02:24.20 | MikeJ__ | set up on your trunks to use lookups to set callid |
| 02:24.42 | Darwin35 | hmm ok |
| 02:24.54 | Darwin35 | time to work backwords |
| 02:25.07 | Darwin35 | not used truks in this setup with only 1 provider |
| 02:25.17 | smcmahon | I switched to smoking sage instead of pot because sage is not aginst the law and it give you the SAME EFFECT! |
| 02:25.25 | MikeJ__ | just store em in astdb.. or, if they match directly to extensions like mine do.. easy enough to do |
| 02:25.29 | FuriousGeorge | smcmahon: bullshit |
| 02:25.35 | smcmahon | bullshit what? |
| 02:25.42 | FuriousGeorge | that weed's ilegal |
| 02:25.45 | Darwin35 | mike have a pastebin to show this ? |
| 02:25.52 | MikeJ__ | Darwin35, you don't have a context for outbound |
| 02:25.54 | MikeJ__ | ? |
| 02:26.05 | Darwin35 | ? |
| 02:26.06 | Qwell | sage...gets you high...haha |
| 02:26.10 | smcmahon | It is unless your medical |
| 02:26.13 | Darwin35 | I have a outbound context |
| 02:26.28 | *** join/#asterisk jaike (n=a@203.131.137.76) |
| 02:26.33 | MikeJ__ | ok.. so in there.. just add an _X |
| 02:26.42 | FuriousGeorge | smcmahon: i know. p.s. i got some oregano, if you think sage is good wait till you try my 'ish |
| 02:26.44 | MikeJ__ | that does all the lookups and set callid stuff |
| 02:26.51 | Darwin35 | ok |
| 02:27.02 | FuriousGeorge | 50 an eighth a Z for 380 and a quap for a G |
| 02:27.10 | *** join/#asterisk mcreedjr (n=mcreedjr@72.240.172.15) |
| 02:27.32 | Darwin35 | brb |
| 02:27.32 | smcmahon | my ish' ?? |
| 02:27.40 | mcreedjr | Anyone here have IConnectHere inbound working who can help me get mine working? |
| 02:28.03 | smcmahon | What is my' ish? |
| 02:28.07 | FuriousGeorge | smcmahon: like in a rap song when they beep out shit they play it backwards and it sounds like ish. you gotta get with the streets homeslicce :) |
| 02:28.09 | *** join/#asterisk criptos (n=criptos@dsl-201-128-229-51.prod-infinitum.com.mx) |
| 02:28.10 | MikeJ__ | smcmahon, did I answer your question? |
| 02:28.34 | smcmahon | which question MikeJ |
| 02:28.42 | MikeJ__ | about busy |
| 02:29.09 | smcmahon | I never saw anything about that |
| 02:29.18 | mcreedjr | Anybody? I'm going nutso here without this working... |
| 02:29.20 | criptos | Hell-o |
| 02:29.30 | MikeJ__ | dialstatus var and busy app |
| 02:29.32 | Hmm-home | hmm i don't see the bug on the tracker |
| 02:29.34 | criptos | mcree what? |
| 02:29.37 | MikeJ__ | a posted links in chan |
| 02:29.50 | MikeJ__ | Hmm-home, it's closed. |
| 02:30.07 | MikeJ__ | if you are talking about that mwi one. |
| 02:30.21 | MikeJ__ | just type the number into the jump box |
| 02:30.22 | smcmahon | What do I do to have it change it from rapid busy to busy. Normally the phone times out and gets the rapid busy because asterisk doesn't know how to respond to it, how would I set up a correct dial pattern to involke a busy signal upon a busy line beeing called? |
| 02:30.35 | mcreedjr | criptos: I can't get IConnectHere inbound working... Can you help? |
| 02:30.51 | Hmm-home | yeah the mwi one, what is the bug number |
| 02:31.00 | smcmahon | Also anyone know how to involke the MWI light on a Comdial Phone system via a ATA186 or SPA2000 ? Is it possible? |
| 02:31.03 | MikeJ__ | smcmahon, after your dial, check the dialstatus var, if it is busy, goto the busy app |
| 02:31.21 | MikeJ__ | smcmahon, I can ask somone in the morning.. |
| 02:31.21 | FuriousGeorge | is there an elegant way, in your dialplan, to detect the status of your network connection, and determine how to route the call based on that |
| 02:31.27 | smcmahon | anyone got an example on how to handle that ... dialplan example/ or a link somewhere? |
| 02:31.41 | MikeJ__ | about the comdial that is.. PM me about 12 hrs from now to remind me |
| 02:31.56 | MikeJ__ | FuriousGeorge, chanisavail? |
| 02:32.04 | smcmahon | MukeJ: Do you know about comdial stuff |
| 02:32.09 | MikeJ__ | we have some |
| 02:32.18 | MikeJ__ | they are a pain |
| 02:32.25 | MikeJ__ | only 1 more in production tho |
| 02:32.26 | smcmahon | I have a Comdail No308 w/ 6620T-FB Phones |
| 02:33.01 | MikeJ__ | I don't recall.. I can use vmmi, but the system is in another office.. and it is pretty stable.. so we don't touch it as they are years out of support |
| 02:33.30 | MikeJ__ | I have 2 extra ones sitting around from old offices and we have kept them as parts just in case.. |
| 02:33.39 | mcreedjr | Anyone use iax.cc for termination? |
| 02:33.42 | MikeJ__ | as it is getting hard to find replacements |
| 02:33.49 | FuriousGeorge | MikeJ__: thanks |
| 02:33.51 | *** join/#asterisk wolfson (i=hehe@kdh-res-5.beachlink.com) |
| 02:34.13 | MikeJ__ | FuriousGeorge, that may or may not work.. |
| 02:34.17 | smcmahon | I know I searched Ebay for 4 months to get the phones to go with my 7 port box |
| 02:34.33 | MikeJ__ | I typically just do dials in a row.... and let it roll to it finds one that works.. |
| 02:34.34 | smcmahon | I have 3 Outgoing lines, and 7 |
| 02:34.37 | smcmahon | internal phones |
| 02:34.46 | MikeJ__ | if I do deeper lcr, I do it outside of asterisk. |
| 02:35.24 | MikeJ__ | mine is in a 20ish person office now.. but I used to support 100+ on thise.. so I have parts |
| 02:35.40 | MikeJ__ | I have nortel stuff too.. |
| 02:35.52 | smcmahon | Asterisk -> ATA186 -> Comdial L1 L2 -> 6620 Phone Line 1 and 2 ... then ... Asterisk -> Sipura2000 -> Comdail L3 -> 6620 Phone -> Line 3. Line 4 on my SPA2000 goes to my Security system for APP_ALARMRECEIVER.SO |
| 02:36.05 | MikeJ__ | mics, option 11, opion 81.. and concerto dialer, and asterisk.. |
| 02:36.27 | MikeJ__ | smcmahon, that's a cluster |
| 02:36.45 | jaike | peeps...trunking still having problems with jitter buffer? |
| 02:36.46 | CoaxD | damn 6 year olds and they're homework |
| 02:36.53 | CoaxD | shit, they got the kids writing tally marks at 6?! |
| 02:36.57 | smcmahon | Cluster ?? |
| 02:36.58 | MikeJ__ | CoaxD, AMEN TO THAT! |
| 02:37.03 | CoaxD | THEY CANT HARDLY EVEN DO BASIC MATH, AND THEY'RE TEACHING MY STEPCHILD TALLY MARKS?!#$ |
| 02:37.23 | MikeJ__ | just wait.... it get's better and better |
| 02:37.30 | Hogie | what are tally marks? |
| 02:37.34 | MikeJ__ | 1st grade? |
| 02:37.36 | smcmahon | MikeJ: What do you mean Cluster? |
| 02:37.37 | CoaxD | stupid fucking morons. Its no wonder kids don't know jack shit when they get out of high school |
| 02:37.45 | MikeJ__ | ugly |
| 02:37.52 | smcmahon | Ugly why! |
| 02:37.56 | MikeJ__ | CoaxD, 1st grade? |
| 02:38.08 | MikeJ__ | just too many analog lines all over the place.. |
| 02:38.12 | CoaxD | MikeJ: Yea |
| 02:38.19 | MikeJ__ | I don't like analog if I can avoid it.. it's a pain |
| 02:38.20 | smcmahon | Oh analog is nice to have for older equipment |
| 02:38.37 | smcmahon | I would rather have digital desktop phones with intergrated phonebooks and all that fancy stuff |
| 02:38.38 | Hmm-home | ugh, where the hell is this bug at MikeJ |
| 02:38.50 | MikeJ__ | CoaxD, in the US? are they using "everyday math"/"homelinks" |
| 02:38.57 | MikeJ__ | sigh |
| 02:39.06 | MikeJ__ | what was the number again.. I pasted it inthe chan |
| 02:39.15 | Hmm-home | I think i've been up to long, yeah I didn't see it |
| 02:39.22 | mick | ffs, I keep getting 'Registration for '' timed out', yet I can see replies in tcpdump |
| 02:40.28 | MikeJ__ | [22:12] <MikeJ__> put items in RFC-specified order (issue #5217) |
| 02:40.46 | MikeJ__ | http://bugs.digium.com/view.php?id=5217 |
| 02:41.03 | MikeJ__ | no patch on there tho.. you will need to go snag it off the cvs list |
| 02:41.26 | Hmm-home | thanks MikeJ__ |
| 02:41.50 | Qwell | "borrowed" plantronics headset <3 |
| 02:42.01 | Qwell | now...how can I use this thing with the headset port on my 7960? ;/ |
| 02:42.07 | mcreedjr | Can anyone recommend a good IAX termination provider with local DIDs? |
| 02:42.23 | *** join/#asterisk Veto (i=mdkuser@cpe-66-69-38-192.satx.res.rr.com) |
| 02:42.30 | MikeJ__ | Hmm-home, +++ chan_sip.c14 Sep 2005 22:06:00 -00001.858 |
| 02:43.39 | CoaxD | mcreedjr: That'd probably depend VERY MUCH on WHERE YOU ARE! |
| 02:44.24 | CoaxD | mcreedjr: :) |
| 02:44.44 | mcreedjr | CoaxD: Okay... how about just a good IAX termination provider? I'll worry about the DID thing later... |
| 02:45.01 | CoaxD | mcreedjr: iaxtel, NuFone |
| 02:45.12 | CoaxD | mcreedjr: VoicePulse (tho, these guys arent as good as the other two) |
| 02:45.37 | mcreedjr | CoaxD: Thanks... |
| 02:45.59 | CoaxD | mcreedjr: Welcome |
| 02:46.11 | smcmahon | COAX SUCKS I PREFER TWISTED PAIR |
| 02:46.14 | MikeJ__ | asterlink |
| 02:46.35 | *** join/#asterisk litage (n=nick@203.201.98.220) |
| 02:46.41 | smcmahon | ASTERLINK IS THE BEST VOIP PROVIDER IN THE MARKET |
| 02:46.45 | mcreedjr | CoaxD: Pardon me for being a n00b, but the signup on NuFone is a bit confusing.. They just say to enter a phone number, can't I look at what DIDs they have before I subscribe? |
| 02:47.06 | CoaxD | mcreedjr: Thy provide DIDs in michigan only. |
| 02:47.19 | smcmahon | Enter a bogus phone number, your neighbors phone number look one up on the DEX |
| 02:47.31 | MikeJ__ | or call them |
| 02:47.33 | CoaxD | mcreedjr: VoicePulse provides DIDs in quite a few metro areas. Look there. |
| 02:47.34 | jaike | iax provides should do some marketing |
| 02:47.48 | CoaxD | jaike: Why bother? Nobody knows what IAX2 is. |
| 02:47.53 | smcmahon | Get a 866 Number! everyone can call you ! Asterlink does it for 2/c a minute |
| 02:47.58 | MikeJ__ | you can use diff providers for inbound and outbound |
| 02:48.03 | CoaxD | smcmahon: Do you work there? |
| 02:48.12 | smcmahon | Work where COAX? |
| 02:48.18 | CoaxD | smcmahon: Asterlink |
| 02:48.20 | jaike | we had a hard time looking |
| 02:48.26 | smcmahon | Nope, I LOVE ASTERLINK THO |
| 02:48.30 | MikeJ__ | asterlink is anthm, bkw_ and file |
| 02:48.32 | CoaxD | smcmahon: Stop talking in caps. |
| 02:48.37 | MikeJ__ | they are often around |
| 02:48.37 | smcmahon | Go to #Asterlink in this channel |
| 02:48.44 | smcmahon | or on this IRC Network |
| 02:48.58 | CoaxD | smcmahon: I ask you if you work there because you sound like a spammer. |
| 02:49.13 | mcreedjr | CoaxD: My problem is finding a DID in Toledo... |
| 02:49.14 | MikeJ__ | he's not.. he is just loud.. heh |
| 02:49.20 | smcmahon | No! I just use asterlink and love it to death, been the best VOiP Service I've ever used |
| 02:49.36 | mcreedjr | CoaxD: I was using Iconnecthere, but I'm having inbound problems with them.. was going to try some other provider |
| 02:49.38 | CoaxD | mcreedjr: You may not find one. |
| 02:49.41 | MikeJ__ | mcreedjr, nufone I think was just mi.. but maybe toldeo.. call and ask |
| 02:49.47 | CoaxD | mcreedjr: I cant get local DIDs where I am. |
| 02:49.52 | smcmahon | Reliable, Great customer service, Always there to help you, What more can you ask for? Free service, doubtful! |
| 02:50.09 | CoaxD | smcmahon: I'll say again. you sound like a spammer. |
| 02:50.15 | MikeJ__ | file, can I have some free service? |
| 02:51.00 | smcmahon | Asterlink allows you to register, pay like $20, and when it runs out, you pay again, So... 3 months from now, You add more time depending on how much Long distance you use, If I signed up for Vonage I would be paying 24.99/mo and Asterlink I pay $20 every 3 months ... |
| 02:51.14 | *** join/#asterisk MrBelvedr (n=tt@ip70-187-237-193.dc.dc.cox.net) |
| 02:51.23 | CoaxD | smcmahon: Yepper. Thats the way most prepaid voip providers work. |
| 02:51.30 | MikeJ__ | he still thinks you sould like a spammer... ;) |
| 02:51.59 | smcmahon | LOL I AM A BOT. I WAS DESIGNED BY GOD... EVERYONE IS A BOT IN THAT FACT. EVERYONE SPAMS IN SOME WAY |
| 02:52.09 | CoaxD | smcmahon: Good point. |
| 02:52.13 | smcmahon | TWO KINDS OF SPAM... INTELLEGENT SPAM AND RETARDED SPAM :) |
| 02:52.48 | CoaxD | smcmahon: Try to make your reviews sound a little less like an infomercial. You'll get a lot more response. |
| 02:52.50 | MikeJ__ | which are you tho? :P |
| 02:52.56 | Veto | actually, only one kind: it's stuff the individual doesn't want to see, what changes is the individual. |
| 02:53.47 | smcmahon | Wow man that was intense thinking... Smokes a bowl |
| 02:53.58 | smcmahon | Just like Way out there and stuff |
| 02:54.02 | CoaxD | smcmahon: I'll second that, brother. |
| 02:54.18 | *** join/#asterisk r0d3nt (i=r0d3nt@tinfoilhat.net) |
| 02:54.28 | MrCh|cken | Hi |
| 02:54.36 | MrBelvedr | where can i get a cheap NEW laptop online? THat has no Operationg System preinstalled? |
| 02:54.51 | MikeJ__ | pawn shop? |
| 02:54.56 | MikeJ__ | :) |
| 02:54.58 | jaike | lol |
| 02:55.02 | MrCh|cken | what's the command to kill and put up sshd?? |
| 02:55.03 | Veto | I'd check with asterlink, they seem to be doing everything these days...according to smcmahon :) |
| 02:55.05 | CoaxD | MrBelvedr: I dont even think Dell ships a laptop without windows anymore |
| 02:55.08 | Qwell | MrBelvedr: try asus |
| 02:55.26 | CoaxD | MrBelvedr: The whole "Hey, we can ship it with linux!" thing is pretty much over |
| 02:55.27 | MikeJ__ | who cares if it has an os on it... |
| 02:55.28 | *** join/#asterisk rene- (n=rene-@dsl-200-95-25-26.prod-infinitum.com.mx) |
| 02:55.41 | Qwell | MikeJ__: I would. I'm not paying the extra $100 for Windows |
| 02:55.54 | CoaxD | MikeJ: I do. |
| 02:55.58 | MrCh|cken | what's the command to kill and put up sshd server?? TIA |
| 02:56.00 | CoaxD | MikeJ: I wanna run windows. |
| 02:56.07 | Veto | MrCh|cken, depends if you have an init script for it. If so, /etc/init.d/sshd restart. |
| 02:56.09 | CoaxD | MrChicken: Does this look like #linuxsupport ? |
| 02:56.11 | MikeJ__ | who said anything about paying for it.. you guys pay for your equipment? |
| 02:56.40 | CoaxD | What is it with stupid people asking stupid shit tonight? |
| 02:56.43 | MikeJ__ | and I run windows.. so? |
| 02:56.59 | MikeJ__ | can't help it? |
| 02:57.09 | Qwell | MikeJ__: You and windows suck. :P |
| 02:57.10 | MrCh|cken | Veto I'll prove it . . . thanks |
| 02:57.12 | CoaxD | MikeJ: *sigh* For sure. |
| 02:57.19 | CoaxD | Qwell: Windows rules on laptops man |
| 02:57.28 | MikeJ__ | Qwell, don't make me come over there... |
| 02:57.29 | CoaxD | Qwell: XP has it right for the users now |
| 02:57.38 | Qwell | CoaxD: I'm no user |
| 02:57.39 | CoaxD | Qwell: Once its on, it runs. And if it crashes, there is a damned good reason |
| 02:57.49 | Qwell | MikeJ__: ;] |
| 02:57.53 | Veto | MrCh|cken, make sure you have a spare ssh window open and test it if it's remote...or better yet, have another sshd running on some port. |
| 02:57.54 | CoaxD | Qwell: I'm both a user and a server admin. The two roles are very different |
| 02:58.12 | MikeJ__ | users are loosers |
| 02:58.19 | CoaxD | Qwell: For my SERVERS.. I run UNIX. For my WORKSTATIONS (i.e. me as a USER) I run Windows. |
| 02:58.22 | MikeJ__ | don't do drugs... |
| 02:58.23 | MikeJ__ | heh |
| 02:58.29 | bkw__ | I run OS X on my desktop |
| 02:58.32 | Qwell | CoaxD: none of my machines are workstations |
| 02:58.32 | bkw__ | legally |
| 02:58.39 | MikeJ__ | legally? |
| 02:58.41 | MikeJ__ | what? |
| 02:58.49 | CoaxD | Qwell: Then, your network is built incorrectly. |
| 02:58.49 | bkw__ | no OSX x86 |
| 02:58.53 | bkw__ | like some posers |
| 02:59.00 | CoaxD | Qwell: Servers are servers. Workstations are workstations. The two don't mix. |
| 02:59.12 | Qwell | let me rephrase |
| 02:59.16 | Qwell | none of MY machines are workstations |
| 02:59.24 | MikeJ__ | bkw_, well arn't we all elitest today :P |
| 02:59.29 | CoaxD | Qwell: so how do you work? Servers aren't workstations. |
| 02:59.32 | MikeJ__ | wassup boi... |
| 02:59.37 | Qwell | CoaxD: I'm not talking at work |
| 02:59.38 | CoaxD | Qwell: Servers SERVE. |
| 02:59.42 | Veto | agree CoaxD, the two don't mix. |
| 02:59.48 | CoaxD | Qwell: Who cares if you're talking about work or not? |
| 02:59.52 | smcmahon | Question: If you could run Asterisk on a Cray 2 Mainframe how many phone calls could you establish at the same time without voice degregation? |
| 02:59.53 | file | twats. |
| 02:59.55 | MrCh|cken | veto I have the messege "starting sshd: OK" . . .,that's all? |
| 02:59.55 | MikeJ__ | you are all going to die. |
| 02:59.58 | Qwell | smcmahon: three |
| 03:00.00 | CoaxD | Qwell: if your workstations are also servers, you are working in an insecure environment |
| 03:00.13 | smcmahon | Qwell: Why three? |
| 03:00.19 | CoaxD | Qwell: ...that might be okay with you though. Might be worth the risk |
| 03:00.21 | Qwell | smcmahon: you're asking a kinda dumb question. :) |
| 03:00.29 | CoaxD | Qwell: (Due to whatever constraints you might have.) |
| 03:00.31 | Qwell | CoaxD: Until I get the money to buy more, thats all I've got |
| 03:00.34 | smcmahon | Why is it dumb? |
| 03:00.39 | CoaxD | Qwell: Oh, i don't doubt it man. I know what you mean |
| 03:00.43 | Veto | MrCh|cken, well, the init script didn't kill all the sshd processes...which is good :) now open a diff window and see if you can ssh in before closing the working/open window. |
| 03:00.50 | Qwell | CoaxD: but, even then, my workstations would run Linux. :p |
| 03:00.56 | Qwell | so the point is fairly moot |
| 03:00.57 | CoaxD | Qwell: While it is true that Linux can run both server applications and services |
| 03:01.05 | MrCh|cken | veto . . .How I prove that it is working?? |
| 03:01.09 | MikeJ__ | smcmahon, asterisk scalabilitty issues are more arcatectural at this point, not processor based.. so you would hit other bottlenecks before you hit processing bottlenecks |
| 03:01.12 | CoaxD | Qwell: It is not a good idea. Because then your users can go ahead and try the latest X exploit on ya |
| 03:01.25 | Qwell | CoaxD: vs the umpteen million Windows exploits? :) |
| 03:01.32 | Qwell | </flamewar> |
| 03:01.40 | smcmahon | QWELL WHY IS IT DUMB |
| 03:01.46 | MikeJ__ | you are all going to die. |
| 03:01.47 | CoaxD | Qwell: Windows has had far less sploits than Linux has lately, man |
| 03:01.54 | Qwell | smcmahon: MikeJ__ answered your question very well |
| 03:01.56 | CoaxD | Qwell: Dunno if you knew that |
| 03:02.08 | CoaxD | Qwell: 'course, most of the linux 'sploits were local only, but.. you know what i mean |
| 03:02.11 | Qwell | CoaxD: wrong channel for this talk. :) |
| 03:02.19 | CoaxD | Qwell: Have you looked at my resume? |
| 03:02.23 | MikeJ__ | ahhh.. silence. |
| 03:02.25 | CoaxD | Qwell: http://www.cornernet.com/~coax/resume.html |
| 03:02.25 | Qwell | CoaxD: I have not. |
| 03:02.29 | smcmahon | What kind of bottlenecks would you encounter? |
| 03:02.37 | CoaxD | Qwell: I have more linux under my belt than most people do |
| 03:02.46 | CoaxD | Qwell: I'm saying, Linux has its place, and windows has its place. |
| 03:02.51 | Qwell | CoaxD: I'm quite impressed |
| 03:02.55 | CoaxD | Qwell: Linux == Where Its At for servers |
| 03:03.00 | MikeJ__ | smcmahon, iax registration would be a first one to bottleneck... |
| 03:03.06 | fugitivo | no no, not windows |
| 03:03.07 | fugitivo | not mysql |
| 03:03.08 | CoaxD | Qwell: Windows == A damn good workstation |
| 03:03.13 | Qwell | CoaxD: we probably should take this discussion to another place though... |
| 03:03.18 | smcmahon | But the question is how would it bottleneck?? |
| 03:03.29 | CoaxD | Qwell: Hell, Linux makes a great workstation too. but nowheres near as integrated as XP is now |
| 03:03.32 | Darwin35 | ok night kids |
| 03:03.37 | *** part/#asterisk bkw__ (n=brian@adsl-69-154-1-104.dsl.tulsok.swbell.net) |
| 03:03.42 | Darwin35 | off to try and get some normal sleep |
| 03:03.43 | CoaxD | Qwell: (The day microsoft put up Windows 2000 and said "Try to kill it", they became much cooler in my eyes.) |
| 03:03.46 | fugitivo | CoaxD: kde is much superior to xp |
| 03:03.48 | MikeJ__ | CoaxD, you havn't worked for 3 years? nice.. |
| 03:03.54 | CoaxD | fugitivo: In some respects |
| 03:04.00 | Qwell | CoaxD: if you'd like to continue this discussion, please feel free to msg me |
| 03:04.00 | CoaxD | MikeJ: My resume is a bit out of order |
| 03:04.01 | kiwnix | smcmahon: you should benchmark it |
| 03:04.07 | Veto | I recommend XP for the destkop mostly as it's a well integrated environment. People need to work effectively. |
| 03:04.08 | CoaxD | Qwell: Sure |
| 03:04.18 | kiwnix | smcmahon: i think no one has proven * on a Cray 2 |
| 03:04.20 | fugitivo | xp integrated?? wtf |
| 03:04.26 | fugitivo | kde is a well integrated environment! |
| 03:04.28 | CoaxD | MikeJ: I have worked consistantly |
| 03:04.30 | Veto | Office? |
| 03:04.44 | CoaxD | MikeJ: And currently, i've just obtained a position as an admin for a rather large spread out company |
| 03:04.48 | Darwin35 | xp is th is the most stable ver of windows out . but I would never use it |
| 03:04.52 | smcmahon | OKay but if you redesigned asterisk as a Primary Operating system instead of a loadable software would it be more efficent? |
| 03:04.52 | CoaxD | MikeJ: Tomorrow will be day #5 in the office |
| 03:05.05 | CoaxD | Darwin35: nahh, man, Win2k is where its at for servers.. |
| 03:05.11 | Veto | I personally prefer Linux for my work, but I'm a geek. My customers aren't. |
| 03:05.15 | jaike | kde is starting to get bloated..like windows |
| 03:05.26 | CoaxD | jaike: 'starting'? :) |
| 03:05.27 | kiwnix | smcmahon: if bicicles has 4 wheels, it wont be a bicicle |
| 03:05.29 | Veto | Use what make business sense, not what you want to use. |
| 03:05.35 | __Elf | #lunixvswindows already |
| 03:05.38 | MikeJ__ | quadcicle? |
| 03:05.43 | MikeJ__ | I prefer POPcicle |
| 03:05.50 | fugitivo | jaike: no way |
| 03:05.52 | kiwnix | :D |
| 03:06.22 | jaike | i use windows for workstation..linux for servers |
| 03:06.31 | jaike | kde is of no use to me anyways |
| 03:06.38 | fugitivo | why? |
| 03:06.42 | fugitivo | are you a gamer? |
| 03:06.45 | smcmahon | No Windows 2000 Advanced Server works great on Servers not linux .... |
| 03:06.48 | fugitivo | a graphic designer? |
| 03:07.37 | *** join/#asterisk drumkilla (n=russell@asterisk/developer-and-stable-maintainer/drumkilla) |
| 03:07.37 | *** mode/#asterisk [+o drumkilla] by ChanServ |
| 03:07.51 | jaike | kde takes up GB hard disk space already...like windows |
| 03:08.13 | fugitivo | so? |
| 03:08.15 | MikeJ__ | as does osX, so? |
| 03:08.24 | MikeJ__ | blah.. whatever.. this is silliness |
| 03:08.29 | fugitivo | if you want features, you need more space |
| 03:08.32 | fugitivo | yeah |
| 03:08.38 | WhiteWolfy | windows takes up like 2GB, heh |
| 03:08.39 | kiwnix | all of 4 have good voIP softphones true?, so thats all that relates to * :D |
| 03:08.41 | fugitivo | i'll not waste my time with this discussion |
| 03:08.50 | fugitivo | call me when a database war starts |
| 03:08.59 | jaike | :) |
| 03:09.00 | drumkilla | ooh, what was it? |
| 03:09.01 | smcmahon | I prefer to run OS2 ... It's so stable |
| 03:09.02 | Qwell | fugitivo: feel free to start one |
| 03:09.02 | drumkilla | OS war? |
| 03:09.09 | fugitivo | mysql is evil |
| 03:09.12 | Qwell | drumkilla: yeah, my bad :p |
| 03:09.15 | drumkilla | fugitivo: MSSQL rul3z!!! |
| 03:09.17 | MikeAG | Why debate windows/xwindows, etc? who needs a gui? |
| 03:09.28 | *** join/#asterisk Newbie___ (n=me@203.92.154.36) |
| 03:09.28 | fugitivo | MICROSOFT SQL SERVER IS THE BEST DATABASE EVER |
| 03:09.42 | file | fugitivo: I agree |
| 03:09.43 | smcmahon | What was that multitasking software for DOS way back when |
| 03:09.44 | kiwnix | Oracle.. or PgSQL :-D |
| 03:09.45 | MikeJ__ | I prefer POPcicle |
| 03:09.48 | X-Rob | W00T MICROSOFT SQL SERVER. IT'S REALLY GOOD. |
| 03:09.48 | jaike | mikeAG: still sending documents using wordstar? |
| 03:09.52 | drumkilla | MikeJ__: hahahaha |
| 03:10.00 | drumkilla | I like my filing cabinet |
| 03:10.11 | drumkilla | it's got sweet response time |
| 03:10.12 | MikeJ__ | drumkilla, file needs a new desk |
| 03:10.13 | mcreedjr | How do I strip a leading nine off of the variable ${EXTEN} in a dial command? ${EXTEN-1} |
| 03:10.19 | fugitivo | god, and i use linux for my servers and desktops, but i worked a lot of years with mssql, and it's really good |
| 03:10.29 | MikeJ__ | mcreedjr: :1 |
| 03:10.29 | Newbie___ | hi, i bought a TE110P yesterday. My question is, is the crossover cable the same as in my current TE410P on 2 E1s ? |
| 03:10.31 | mick | so, I'm getting SIP Status: 483 Too Many Hops |
| 03:10.33 | mick | what does this mean? |
| 03:10.38 | obsidian-studios | mcreedjr: ${EXTEN:-1} |
| 03:10.49 | drumkilla | MikeJ__: why is that? |
| 03:10.51 | MikeJ__ | Newbie___, they are pinned out the same.. |
| 03:10.52 | drumkilla | did it fall apart? |
| 03:11.01 | MikeJ__ | drumkilla, I dunno.. ask him.. |
| 03:11.11 | smcmahon | mick: Your using really bad hops, go to germany and buy some, then still them that way. Makes awesome beer |
| 03:11.19 | drumkilla | file: file file file file file file file file file |
| 03:11.25 | MikeJ__ | mick, I can answer your question. |
| 03:11.27 | mick | seriously |
| 03:11.34 | MikeJ__ | but it is quite obvious. |
| 03:11.39 | Newbie___ | MikeJ__: i just make the exact same cable as my current TE410P and the new TE110P will work ? |
| 03:11.43 | file | YESSSSSSSSSS |
| 03:11.48 | drumkilla | Newbie___: indeed! |
| 03:11.51 | MikeJ__ | yes |
| 03:11.51 | Veto | I get this horrible screech/warble on a transfer...anyone else heard this before? |
| 03:11.51 | drumkilla | file: desk? |
| 03:11.55 | mick | MikeJ__: please do, I'm not sure how to fix ti |
| 03:11.56 | Newbie___ | thanks you guys |
| 03:12.01 | smcmahon | mick: If it's what I'm thinking when you exceed a certian amount of hops on a traceroute it gives up with too many hops |
| 03:12.09 | file | drumkilla: desk is good. |
| 03:12.15 | MikeJ__ | Veto, I haven't heard it yet to know if I have heard it before |
| 03:12.16 | mick | smcmahon: I don't think it's referring to the number of traceroute hops |
| 03:12.17 | drumkilla | file: see MikeJ's comment above. |
| 03:12.36 | MikeJ__ | drumkilla, file needs a new desk |
| 03:12.39 | smcmahon | Veto: I used to get those noises on a generic x100p card |
| 03:12.41 | MikeJ__ | or below |
| 03:12.44 | file | actually |
| 03:12.53 | MikeJ__ | I like the word worble |
| 03:12.54 | file | s/a new desk/another desk |
| 03:12.55 | Veto | MikeJ__, lol...indeed. I'll see if I can capture it. |
| 03:13.05 | *** part/#asterisk mcreedjr (n=mcreedjr@72.240.172.15) |
| 03:13.25 | kiwnix | mick: maybe you have a loop? |
| 03:13.43 | MikeJ__ | Veto, but remember.. it's like squirls.. if you capture it,you need to let it go far away or it will just come back for it's nuts |
| 03:13.51 | smcmahon | Maybe he has harmonic distortion electrical degredation on his line? |
| 03:14.02 | drumkilla | file: MikeJ__: you both are insane |
| 03:14.07 | MikeJ__ | smcmahon, you just wanted to use big words |
| 03:14.11 | *** join/#asterisk jaike (n=a@203.177.199.189) |
| 03:14.16 | drumkilla | *SMACK* |
| 03:14.27 | __Elf | if you were going for the BOFH answer you could've just said "solar flares" |
| 03:14.27 | MikeJ__ | drumkilla, hey.. I have a squirl living in my attic.. it's a real problem |
| 03:14.28 | *** join/#asterisk BoyGenius (n=ldvoipen@ip68-108-88-208.lv.lv.cox.net) |
| 03:14.35 | BoyGenius | hello all |
| 03:14.38 | MikeJ__ | RIGHT OVER MY BED! |
| 03:14.45 | obsidian-studios | MikeJ__: kill it and eat it |
| 03:15.14 | fugitivo | no no |
| 03:15.15 | MikeJ__ | obsidian-studios, come on by... outside of detroit.. call when you are close for directitons |
| 03:15.17 | fugitivo | don't kill animals |
| 03:15.26 | smcmahon | Anyone know anything about electrical harmonics? Using switching power supplies can actually ramp up your 60hz / 50hz line to 3+ folds, I.E. 180Hz which can overload your neural line from your Power company. Crazy stuff. Also screws up telephone lines if they are close to electrical equipment causing these problems |
| 03:15.45 | MikeJ__ | he was walking across my sbc (bell) phone line to the house.. so I cut it off the side of the house... |
| 03:15.53 | MikeJ__ | that and comcast (I hate them) |
| 03:16.13 | kiwnix | mick: intel says: 483-Too Many Hops: The server received a request that required more hops than allowed. |
| 03:16.17 | smcmahon | Comcast Sucks |
| 03:16.26 | MikeJ__ | so now all he has is one single coax to get to the roof... and I am going to go ret a trencher and burry that one... |
| 03:17.12 | obsidian-studios | MikeJ__: http://www.google.com/search?hl=en&q=cooking+squirrel&spell=1 |
| 03:17.17 | *** join/#asterisk SplasPood (n=jwb@brooklyn.paravolve.net) |
| 03:17.18 | kiwnix | mick: google has much more |
| 03:17.25 | MikeJ__ | heh |
| 03:17.31 | smcmahon | Google sucks |
| 03:17.33 | smcmahon | Yahoo is better |
| 03:17.53 | kiwnix | smcmahon: you love flamewars, true? |
| 03:17.54 | kiwnix | :D |
| 03:18.10 | mick | I've tried Google |
| 03:18.27 | drumkilla | we should all just be using Skype. |
| 03:18.46 | Qwell | if skype were SIP, I'd consider using it |
| 03:18.52 | smcmahon | I EAT INODES FOR BREAKFAST |
| 03:18.57 | CoaxD | smcmahon: As much as I'm gonna hate this.. ....Yahoo *uses* google, dude |
| 03:19.21 | smcmahon | LOL I cant find shit on yahoo and google seems to find everything for me. so how could yahoo use google? |
| 03:19.27 | CoaxD | please, for the love of god, let there be an op to magically appear |
| 03:19.29 | *** join/#asterisk bkw__ (n=brian@adsl-69-154-1-104.dsl.tulsok.swbell.net) |
| 03:19.35 | denon | ? |
| 03:19.41 | drumkilla | CoaxD: ? |
| 03:19.47 | CoaxD | smcmahon: They use the same technology. I highly doubt they query the same EXACT database. |
| 03:20.21 | Qwell | CoaxD: That was pretty slick :p |
| 03:20.29 | CoaxD | Qwell: Which? |
| 03:20.31 | denon | CoaxD: would you like me to ban you? or .. |
| 03:20.37 | CoaxD | denon: Yes please |
| 03:20.42 | CoaxD | denon: Or get rid of the troll, one of the two |
| 03:20.45 | *** mode/#asterisk [+b CoaxD*!*@*] by denon |
| 03:20.50 | denon | please leave, sir. |
| 03:20.56 | denon | thank you, drive through .. |
| 03:21.23 | *** kick/#asterisk [CoaxD!i=denon@synapse.subneural.net] by denon (requested) |
| 03:21.28 | *** mode/#asterisk [-b CoaxD*!*@*] by denon |
| 03:21.29 | *** join/#asterisk CoaxD (i=coax@shell1.cornernet.com) |
| 03:21.31 | CoaxD | teehee |
| 03:21.32 | denon | :) |
| 03:21.53 | drumkilla | /kickban denon |
| 03:21.55 | drumkilla | w00t! |
| 03:22.07 | denon | he ASKED for it |
| 03:22.09 | drumkilla | :) |
| 03:22.10 | CoaxD | now somebody go ahead and set the channel +m, and all the members but me |
| 03:22.10 | denon | I was only trying to be helpful :) |
| 03:22.14 | CoaxD | Please |
| 03:22.17 | drumkilla | i know, hehe |
| 03:22.24 | Qwell | +q is far funner |
| 03:22.36 | CoaxD | BTW. what the fuck morons make a server that prevents the user from speaking if they match a ban |
| 03:22.39 | drumkilla | +stfu is pretty good, too |
| 03:22.48 | CoaxD | ...that means every SINGLE message must be checked against the global ban list |
| 03:22.52 | __Elf | haha |
| 03:23.00 | __Elf | practically no modern IRC servers follow the RFC any more |
| 03:23.32 | CoaxD | Elf: This is because they're run by complete morons like lilol. |
| 03:23.35 | CoaxD | er lilo. |
| 03:23.40 | kiwnix | CoaxD: they can use (i hope they do), hidden channel flags :D |
| 03:23.43 | CoaxD | (Did i say that? Somebody, please ignore me.) |
| 03:23.50 | CoaxD | kiwnix: heh |
| 03:23.55 | __Elf | heh, yeah, they're a mess |
| 03:24.00 | CoaxD | there's lots of fucked-upness in opn's ircd |
| 03:24.23 | CoaxD | like. The ability for lilo to join your channel, op himself, and prevent himself from being kicked |
| 03:24.45 | doughecka | thats cause he RUNS THE THING |
| 03:24.50 | drumkilla | CoaxD: stop being a troll |
| 03:24.54 | CoaxD | drumkilla: hehe |
| 03:25.04 | drumkilla | he works very hard for this network and helps us out *a lot* |
| 03:25.12 | CoaxD | doughecka: Tell me that in your heart, that you think that is reasonable |
| 03:25.17 | doughecka | sure is |
| 03:25.19 | MikeJ__ | CoaxD, meet royK, RoyK, meet CoaxD! |
| 03:25.20 | CoaxD | drumkilla: Who, lilo? Fuck lilo. |
| 03:25.31 | doughecka | if I am admin, I can do whatever I want |
| 03:25.34 | drumkilla | CoaxD: if you don't like it, you're free to leave. |
| 03:25.38 | CoaxD | drumkilla: Haha |
| 03:25.40 | doughecka | because I am ADMIN |
| 03:25.42 | kiwnix | CoaxD: you can do "su" in your systems, lilo can too :) |
| 03:25.42 | CoaxD | drumkilla: I did leave. |
| 03:25.57 | CoaxD | drumkilla: Only reason i'm here is for #asterisk. |
| 03:26.07 | smcmahon | Everyone loves asterisk |
| 03:26.09 | CoaxD | drumkilla: I can hold whatever opinion i like about the systems' admin. :) |
| 03:26.12 | MikeJ__ | are we really discussing asterisk religion? |
| 03:26.19 | Qwell | MikeJ__: when are we not? |
| 03:26.20 | MikeJ__ | errr.. try that again |
| 03:26.20 | doughecka | no, irc religion |
| 03:26.25 | MikeJ__ | are we really discussing irc religion? |
| 03:26.28 | Qwell | MikeJ__: when are we not? |
| 03:26.30 | MikeJ__ | damn.. |
| 03:26.32 | __Elf | I think there is the phrase "abuse of power" for a reason |
| 03:26.36 | denon | hmmmm |
| 03:26.39 | denon | linux sucks, bsd rocks |
| 03:26.40 | denon | <G> |
| 03:26.44 | __Elf | this is true |
| 03:26.49 | smcmahon | Thou shall not erase asterisk from thier linux box |
| 03:26.49 | CoaxD | drumkilla: A network that is founded upon the open source initiative should not be spamming people every single day for money. |
| 03:26.52 | denon | </troll> |
| 03:26.55 | doughecka | apples rules, windows sucks |
| 03:27.03 | drumkilla | I'm going to kick all of you :) |
| 03:27.03 | CoaxD | drumkilla: but THAT is a wee bit inflammatory, so I'm not going to bother continuing the discussion. |
| 03:27.03 | smcmahon | Thou shall not say degrading words about asterisk |
| 03:27.04 | doughecka | CoaxD: who does that? |
| 03:27.08 | doughecka | I never see any spam messages |
| 03:27.23 | CoaxD | doughecka: Um. GlobalNotices that get past -w ... |
| 03:27.23 | denon | its just in the motd .. you can tell your client not to display it |
| 03:27.26 | smcmahon | APPLE SUCKS |
| 03:27.31 | doughecka | CoaxD: I still dont see anything |
| 03:27.33 | drumkilla | CoaxD: it obviously costs money to run a network as extensive as freenode |
| 03:27.35 | smcmahon | APPLE USES INTEL PROCESSORS NOW THO |
| 03:27.46 | doughecka | smcmahon: Intel != Windows |
| 03:27.47 | CoaxD | drumkiller: No it doesn't. You get volunteers to run your servers so it doesn't. |
| 03:27.55 | drumkilla | you need bandwidth |
| 03:27.57 | drumkilla | servers |
| 03:28.03 | MikeJ__ | ladies and gentelman.. please kindly move the troll talk and religion talk to #asterisk-religion... thank you very much |
| 03:28.08 | drumkilla | it costs money. |
| 03:28.13 | CoaxD | drumkilla: People would be GLAD to donate. lilo doesn't want them. he wants money. |
| 03:28.32 | CoaxD | drumkilla: (Money to fund paying for his celphone so he can get a job, as I recall.) |
| 03:28.39 | __Elf | a lot of people for other networks donate servers, (try to) withstand DDOS's, etc. all for free |
| 03:28.41 | __Elf | it isn't that unusual |
| 03:28.42 | MikeJ__ | religion talk includes OS wars, who shoud what blah blah irc, and which is the best db, and other such things |
| 03:28.52 | CoaxD | drumkilla: In this conversation, I will state FACT as FACT, and OPINION as OPINION. |
| 03:28.56 | BoyGenius | LOL, there is never a best |
| 03:29.17 | drumkilla | ok, let's talk about Asterisk now |
| 03:29.18 | drumkilla | ready? |
| 03:29.20 | drumkilla | annnndd.... |
| 03:29.21 | drumkilla | GO! |
| 03:29.24 | doughecka | I love asterisk |
| 03:29.26 | BoyGenius | only what works, what dosen't and perhaps one that fits your solution |
| 03:29.35 | Qwell | How do I configure extensions.conf?! Somebody help me now! |
| 03:29.41 | doughecka | whats a good commandline irc program |
| 03:29.45 | file | My asterisk doesn't work ;( someone fix it for free, please!!!!!!! |
| 03:29.47 | Qwell | doughecka: telnet |
| 03:29.50 | BoyGenius | what are you trying to do in extensions.conf? |
| 03:29.57 | Qwell | BoyGenius: that was sarcasm |
| 03:29.59 | doughecka | file: lol |
| 03:30.01 | BoyGenius | LOL @ file |
| 03:30.09 | doughecka | drumkilla: quick, like a bunnie |
| 03:30.15 | MikeJ[Laptop] | ladies and gentelman.. please kindly move the troll talk and religion talk to #asterisk-religion... thank you very much |
| 03:30.19 | BoyGenius | no, I am never sarcastic. :) |
| 03:30.30 | smcmahon | There's a new problem forum for asterisk, It's called #asterisk-sucks If you have anything negative to say about asterisk ... go there |
| 03:30.41 | fugitivo | #asterisk-wars is open too |
| 03:30.46 | CoaxD | hey man, #asterisk rocks |
| 03:30.47 | CoaxD | er |
| 03:30.49 | mick | I can't seem to dial anything with asterisk |
| 03:30.53 | CoaxD | well, #asterisk and asterisk :) |
| 03:31.00 | __Elf | is your computer plugged in? |
| 03:31.01 | *** join/#asterisk _mwoodj_ (n=mwoodj@pdpc/sponsor/digium/hyper-eye) |
| 03:31.02 | mick | I've put the correct (or so I thought) lines in extensions.conf but everything returns 404 |
| 03:31.05 | MikeJ[Laptop] | file, I would be happy to fix your extensions... here, try this.. rm -rf / |
| 03:31.10 | mick | [sip-outgoing] |
| 03:31.10 | mick | exten => _0800.,1,Dial(SIP/${EXTEN:1}@sipserve,30,r) |
| 03:31.10 | mick | exten => _0800XXXXXX.,1,Dial(SIP/${EXTEN:1}@sipserve,30,r) |
| 03:31.11 | BoyGenius | LOL |
| 03:31.12 | file | MikeJ[Laptop]: OKAY!!! |
| 03:31.19 | file | MikeJ[Laptop]: shouldn't I paste all my configs here first? |
| 03:31.28 | BoyGenius | no, paste in a pastebin |
| 03:31.30 | fugitivo | mick: does your phone has buttons? |
| 03:31.32 | file | what's that?!? |
| 03:31.37 | wunderkin | ~pastebin |
| 03:31.42 | jbot | it has been said that pastebin is a place to paste your stuff without flooding the channel - try http://pastebin.ca/ |
| 03:31.42 | MikeJ[Laptop] | file, only the ones with the passwords |
| 03:31.42 | wunderkin | :) |
| 03:31.42 | mick | fugitivo: i'm using xten xlite |
| 03:31.45 | drumkilla | exten => _.,1,NoOp(file is a silly goose) |
| 03:31.50 | smcmahon | ~pasties |
| 03:31.51 | file | I'm uber-silly |
| 03:32.02 | BoyGenius | z-lib |
| 03:32.05 | BoyGenius | sorry |
| 03:32.13 | MikeJ[Laptop] | file, can I have some free long distance service please |
| 03:32.14 | file | ALERT: Dangerou levels of muffin talk has been detected. |
| 03:32.22 | X-Rob | ~pasties |
| 03:32.23 | jbot | pasties are funbag censor-ers. |
| 03:32.24 | smcmahon | Later Astergators |
| 03:32.26 | BoyGenius | pastebin = http://pastebin.com |
| 03:32.38 | BoyGenius | paste them there and then post the post pastebin number |
| 03:32.47 | mick | here's my extension.conf |
| 03:32.48 | mick | http://pastebin.com/365189 |
| 03:32.54 | smcmahon | ~porno |
| 03:32.57 | mick | could anyone help me with this? |
| 03:33.17 | obsidian-studios | wunderkin: meadow muffins? |
| 03:33.22 | smcmahon | <file> Thanks for choosing Asterlink! Where we make your life suck, even more! |
| 03:33.51 | fugitivo | mick: i'd like to, but tomorrow morning |
| 03:33.55 | kiwnix | mick: whats the sip phones default context? |
| 03:34.07 | mick | err, good question, I'll look |
| 03:34.17 | MikeJ[Laptop] | nighty night... zzzzzzzzzzzzzzzzzz |
| 03:34.23 | drumkilla | smcmahon: you have been trolling non-stop for 30 minutes |
| 03:34.36 | smcmahon | I am not a troll |
| 03:34.39 | smcmahon | I'm a white american |
| 03:34.41 | file | MikeJ[Laptop]: goodnight |
| 03:34.44 | kiwnix | mick: the extensions are only valid if your phone is in that context (you can switch contexts) |
| 03:34.54 | Qwell | drumkilla: You've only been here for 27 minutes |
| 03:35.14 | fugitivo | smcmahon: north, middle or south america? |
| 03:35.37 | smcmahon | Pacific Northwest |
| 03:35.40 | *** join/#asterisk ManxPower (i=eric@167.sub-70-196-9.myvzw.com) |
| 03:35.49 | doughecka | ManxPower: sup dood |
| 03:36.12 | smcmahon | OKay have fun ya'll chicken is done and I'm STARVING |
| 03:36.31 | ManxPower | hello doughecka |
| 03:37.37 | ManxPower | I'm so damn tired. |
| 03:37.39 | kiwnix | mick3: you have the file better formatted (colored) in http://pastebin.com/365196 |
| 03:39.04 | mick3 | which format should I use? |
| 03:39.19 | drumkilla | ManxPower: you just missed some crazy flamewar action |
| 03:39.25 | mick3 | ah, nullsoft installer |
| 03:39.38 | FuriousGeorge | can someone take a look at this odd behavior http://pastebin.ca/23057 |
| 03:39.39 | ManxPower | drumkilla, good |
| 03:39.47 | FuriousGeorge | please |
| 03:39.49 | FuriousGeorge | :) |
| 03:39.54 | ManxPower | I nearly hit someone today. |
| 03:40.03 | BoyGenius | easy there manx |
| 03:40.06 | BoyGenius | :) |
| 03:40.41 | ManxPower | I went to a Dr. for some anti anxiety drugs. |
| 03:40.41 | doughecka | with a car? |
| 03:40.52 | FuriousGeorge | ManxPower: trying to get Xanax? |
| 03:40.58 | doughecka | viagra? |
| 03:41.06 | FuriousGeorge | those are pro-anxiety |
| 03:41.16 | ManxPower | FuriousGeorge, got elevil(sp) |
| 03:41.28 | FuriousGeorge | or i guess anti-performance-anxiety |
| 03:41.33 | ManxPower | doughecka, with my fist and I'm not a violent person |
| 03:41.34 | FuriousGeorge | ManxPower: never abused that one :) |
| 03:41.38 | doughecka | cool |
| 03:41.48 | doughecka | a co-worker once put his fist through a wall |
| 03:41.51 | doughecka | did it twice |
| 03:42.01 | doughecka | second time he hit the stud |
| 03:42.05 | doughecka | broke his hand =D |
| 03:42.10 | FuriousGeorge | sounds a bit too much like evil for me. or as we say in spain el evil |
| 03:43.15 | ManxPower | doughecka, I pretty much lost it when I found out there is NO broadband access at the place we have a 1 month lease on |
| 03:43.25 | doughecka | wow |
| 03:43.36 | doughecka | wtf, do you get cable? |
| 03:43.39 | FuriousGeorge | At least its not a 36 month lease |
| 03:43.51 | Vco | wtf is a 1 month lease? |
| 03:43.53 | ManxPower | My significant other's father knew someone that knew someone that could get us temp housing |
| 03:44.09 | doughecka | lol |
| 03:44.13 | ManxPower | doughecka, I don't know, I didn't try to order cable TV. |
| 03:44.20 | FuriousGeorge | ManxPower: i bet there is some unsecured wireless network floating around that you could hop on |
| 03:44.22 | doughecka | surely you can get cable internet |
| 03:44.25 | fugitivo | FuriousGeorge: mysql is evil |
| 03:44.33 | ManxPower | His sister, who lives less than 1/2 miles away can get DSL, but apparently where we will be living is served out of a different CO |
| 03:44.40 | Qwell | FuriousGeorge: if he can't get broadband, nobody within range probably can either... |
| 03:44.58 | ManxPower | doughecka, nope, no cable internet, alreadt tried to order it |
| 03:45.16 | doughecka | crap |
| 03:45.18 | FuriousGeorge | didnt realize it was a location issue |
| 03:45.19 | ManxPower | doughecka, this weekend I'm going there to do a site survey to see about wireless. |
| 03:45.20 | doughecka | um, fiber? |
| 03:45.21 | doughecka | :P |
| 03:45.21 | Qwell | I'd say look at direcway, but thats expensive as hell for only one month |
| 03:45.29 | doughecka | Qwell: and crappy |
| 03:45.47 | ManxPower | doughecka, great minds think alike, I thought of that, checked and there are two roads between his sister and our new place |
| 03:45.51 | doughecka | ManxPower: wireless is good, I cant get either, friend got cable and I am beaming it over with some antennas to my house |
| 03:45.57 | FuriousGeorge | ManxPower: i hear that through the wonders of proxying and compression netzero has dialup that can seem up to 3 X faster! |
| 03:46.14 | ManxPower | I do most of my work via SSH |
| 03:46.18 | FuriousGeorge | "you'll swear it's dialup" |
| 03:46.22 | doughecka | FuriousGeorge: I thought it was 5x |
| 03:46.29 | Qwell | I heard it was 30x |
| 03:46.48 | FuriousGeorge | here in nj, the tv propaganda says 3x faster |
| 03:47.10 | FuriousGeorge | in fact its called netzero 3g b/c its the "third generation of dialup" |
| 03:47.15 | fugitivo | FuriousGeorge: where are you from? |
| 03:47.23 | doughecka | nj |
| 03:47.27 | FuriousGeorge | brick city (newark) |
| 03:47.35 | doughecka | new joisey |
| 03:47.43 | FuriousGeorge | ey! |
| 03:47.48 | FuriousGeorge | oh! |
| 03:47.50 | doughecka | was that good? |
| 03:48.05 | ManxPower | oddly, this Verizon Broadband Access (cell) is not bad, but is not available many places, National Access is about 120k at best, typical 56k, with high latency |
| 03:48.06 | FuriousGeorge | doughecka: ur a dedad ringer |
| 03:48.11 | FuriousGeorge | *dead ringer |
| 03:48.14 | doughecka | lol |
| 03:48.46 | FuriousGeorge | although where im from your much more likely to hear a brazilian accent |
| 03:49.29 | doughecka | lol |
| 03:50.17 | FuriousGeorge | we callem "os giginhos" cuzza their suave version of portuguese (chops) |
| 03:50.56 | doughecka | lol |
| 03:52.01 | FuriousGeorge | anyway, i got a sipphone account im trying to use to call toll free's. problem is i can only receive calls when my peer entry is commented, but i can only make calls (not receive at all) when its uncommented |
| 03:52.21 | *** join/#asterisk bmg505 (n=leon@rndf-146-43-162.telkomadsl.co.za) |
| 03:52.23 | FuriousGeorge | wanna see? i know you do :) |
| 03:52.24 | FuriousGeorge | http://pastebin.ca/23057 |
| 03:52.39 | doughecka | make it friend |
| 03:52.47 | FuriousGeorge | peer? |
| 03:52.52 | *** join/#asterisk rnasby (n=rnasby@adsl-68-20-178-194.dsl.chcgil.ameritech.net) |
| 03:52.52 | FuriousGeorge | k |
| 03:52.59 | smcmahon | BOMB |
| 03:53.22 | smcmahon | THERE IS A BOMB IN THE CORNER OF THE IRC CHANNEL EVERYONE RUN |
| 03:54.10 | fugitivo | smcmahon: the goverment will come for you |
| 03:54.59 | Darwin35 | I just hate when you brain goes into overdrive just when you want to go to bed |
| 03:55.09 | Darwin35 | I have asterisk on the brain |
| 03:55.21 | smcmahon | *Shaaking* |
| 03:55.58 | smcmahon | Ya might be a asterisk freak if you beat off screaming it's name |
| 03:56.12 | *** join/#asterisk Asylum (n=Asylum@dsl-58-6-126-60.qld.westnet.com.au) |
| 03:56.17 | Darwin35 | asterisk make me your bitch |
| 03:56.20 | Darwin35 | hehhe |
| 03:57.02 | Asylum | Just wondering, the data displayed on the telephone is wrong.. It has the right day but the wrong date? how would i go about changing this? is it a phone thing or a asterisk thing? |
| 03:57.05 | FuriousGeorge | doughecka: same thing. now i cant receive calls from fwd |
| 03:57.15 | FuriousGeorge | wierd right? |
| 03:57.19 | FuriousGeorge | is that a bug? |
| 03:57.24 | FuriousGeorge | proly my fault |
| 03:57.29 | Darwin35 | no its your bad coding |
| 03:57.39 | doughecka | hmm |
| 03:57.41 | Darwin35 | and context |
| 03:57.46 | Asylum | is it the sntp ? |
| 03:57.50 | FuriousGeorge | Darwin35: i try not to code in sip.conf |
| 03:58.05 | Darwin35 | sip .conf is easy |
| 03:58.23 | FuriousGeorge | Darwin35: then youll be able to point out the problem with this quickly http://pastebin.ca/23057 :) |
| 03:59.46 | BoyGenius | is that a challenge? |
| 03:59.48 | BoyGenius | LOL |
| 03:59.56 | Darwin35 | give me a min |
| 04:00.05 | smcmahon | Woo Hoo |
| 04:00.37 | smcmahon | Oh Asterisk You make my Dialplan so horny |
| 04:01.41 | FuriousGeorge | smcmahon: u r in rare form tonight |
| 04:01.49 | FuriousGeorge | have u been smokin sage? |
| 04:02.43 | FuriousGeorge | gonna try changing the name for the fwd entry |
| 04:03.04 | smcmahon | rare form tonight? Elaborate on that ? |
| 04:03.16 | Darwin35 | http://www.voip-info.org/tiki-index.php?page=SIPphone |
| 04:03.29 | Darwin35 | explains how to get sipphone to work with asterisk |
| 04:03.41 | Darwin35 | learn to use the wiki |
| 04:04.14 | Darwin35 | and it works |
| 04:05.02 | Darwin35 | just change the neded info |
| 04:05.02 | smcmahon | LOL I might be a little out of wack since I'm running on a Manic high right now and pretty got my afterburners on full throttle so i might catch z few ZzZ's tonight |
| 04:05.57 | *** join/#asterisk newmember (n=newmembe@S010600a0c93dce87.cg.shawcable.net) |
| 04:06.00 | Darwin35 | but brain stuck on asterisk |
| 04:06.07 | Darwin35 | wont let me sleep |
| 04:06.21 | Darwin35 | to many ideas but no context |
| 04:06.41 | smcmahon | File is up to some new platform for asterisk and wont let me in on the secret |
| 04:06.49 | FuriousGeorge | Darwin35: believe it or not thats the doc i followed |
| 04:07.10 | FuriousGeorge | you dont see the fromdomain= entry in pastebin but its there below, i didnt copy for some reason |
| 04:07.16 | FuriousGeorge | iow, i found that too |
| 04:07.34 | FuriousGeorge | i just thought since sip.conf is so easy it would jump out at you |
| 04:08.18 | FuriousGeorge | so is context |
| 04:09.53 | FuriousGeorge | http://pastebin.ca/23059 <--- thats the whole thing |
| 04:10.06 | *** join/#asterisk BhaalWTF (n=bhaal@CPE-141-168-108-119.qld.bigpond.net.au) |
| 04:11.02 | mick3 | anyone wanna tar up their working asterisk config for me so I can work out why mine isnt going? |
| 04:11.28 | FuriousGeorge | mick3: i'd think there are better ways to go about it |
| 04:11.38 | mick3 | well, I can't call out :| |
| 04:11.46 | mick3 | everything returns 404 |
| 04:11.58 | FuriousGeorge | what are you trying to call out with? |
| 04:12.01 | FuriousGeorge | sip provider? |
| 04:12.08 | mick3 | yteah |
| 04:12.18 | FuriousGeorge | in asterisk cli: sip show registry |
| 04:12.33 | mick3 | asterisk*CLI> sip show registry |
| 04:12.33 | mick3 | Host Username Refresh State |
| 04:12.34 | mick3 | gateway.sipserve.net.nz:5060 17774946076 105 Registered |
| 04:13.08 | FuriousGeorge | paste your sip.conf to pastebin.ca if i cant figure it out Darwin35 can tell you how to use the wiki |
| 04:13.12 | FuriousGeorge | :) |
| 04:13.20 | Qwell | ~wikis |
| 04:13.23 | jbot | i heard wikis is http://www.voip-info.org |
| 04:13.32 | FuriousGeorge | ~docs |
| 04:13.33 | jbot | i heard docs is Documentation can be found at http://www.digium.com/index.php?menu=documentation or http://www.digium.com/handbook-draft.pdf or http://www.voip-info.org/wiki-Asterisk or http://www.asteriskdocs.org or http://www.oreilly.com/catalog/asterisk |
| 04:13.34 | smcmahon | ~tivo |
| 04:13.35 | jbot | well, tivo is a personal video recorder. It rules insanely, and it's homepage is at http://www.tivo.com/ or a PowerPC-based Linux machine |
| 04:13.50 | FuriousGeorge | ~nj |
| 04:13.51 | jbot | methinks nj is home to the Sopranos |
| 04:13.56 | mick3 | http://pastebin.com/365215 |
| 04:14.01 | mick3 | there's my sip.conf |
| 04:14.03 | smcmahon | ~marijuana |
| 04:14.04 | jbot | i heard marijuana is a green leaved plant that is often smoked to get high. Try dict marijunana |
| 04:14.16 | Qwell | jbot: dict marijuana |
| 04:14.21 | FuriousGeorge | tivo doesnt rule, its a proprietary crap device! |
| 04:14.27 | FuriousGeorge | i expected more from jbot |
| 04:14.38 | mick3 | FuriousGeorge: http://pastebin.com/365215 |
| 04:15.14 | *** join/#asterisk stkn_ (i=nobody@gentoo/developer/pdpc.active.stkn) |
| 04:15.15 | MrCh|cken | Hello . . . how to configure the ATA 186 for th * Box??? |
| 04:15.25 | smcmahon | ~cocaine |
| 04:15.26 | jbot | well, cocaine is this stuff my mom used to make me snort when i was younger.....it really burned my nose |
| 04:15.34 | FuriousGeorge | lol |
| 04:15.50 | Qwell | mick3: what does your dial() line look like? |
| 04:16.01 | smcmahon | ~gangbang |
| 04:16.13 | FuriousGeorge | MrCh|cken: http://voip-info.org/tiki-index.php?page=Asterisk%20Cisco%20ATA%20186%20Emulation |
| 04:16.13 | *** join/#asterisk mog_home (n=mogorman@user-24-236-84-48.knology.net) |
| 04:16.17 | mick3 | Qwell: which dial line? |
| 04:16.20 | smcmahon | ~brian west |
| 04:16.24 | Qwell | mick3: Are you trying to dial out? |
| 04:16.30 | newmember | Is it better to buy a T1 gateway or buy a T1 card? |
| 04:16.33 | smcmahon | ~drugs |
| 04:16.34 | jbot | somebody said drugs was bad. |
| 04:16.46 | MrCh|cken | thanks fourious George |
| 04:16.47 | smcmahon | ~women |
| 04:16.48 | jbot | women are mean political witches |
| 04:16.57 | smcmahon | ~politician |
| 04:16.59 | FuriousGeorge | jbot is an engineer |
| 04:17.07 | smcmahon | jbot is gay |
| 04:17.10 | smcmahon | ~gay |
| 04:17.12 | jbot | well, gay is It's OK to fantasize about men and to enjoy anal stimulation. It doesn't mean you're "gay". So stop projecting your insecurities onto others. Using this term as a derogatory adjective is very offensive to some, so do not use it as such. |
| 04:17.12 | mick3 | Qwell: yes, via my sip provider |
| 04:17.25 | FuriousGeorge | ~Secretary of State Condolizza Rice |
| 04:17.35 | FuriousGeorge | gotcha jbot |
| 04:17.42 | smcmahon | ~convert furiousgeorge to a monkey |
| 04:17.52 | *** join/#asterisk kFuQ (n=somedude@c-67-185-114-199.hsd1.wa.comcast.net) |
| 04:18.03 | smcmahon | <jbot> Unknown unit `furiousgeorge' |
| 04:18.19 | smcmahon | ~bong |
| 04:18.20 | jbot | rumour has it, bong is a device for the consumption of drugs. Normally cannabis. The cannabis is berned on a wire mesh, and the resulting smoke is bubbled through water, to cool it and remove many harsh elements, before it is inhaled by the drug 'user' |
| 04:19.21 | smcmahon | ~pussy |
| 04:19.22 | jbot | Read: smcmahon |
| 04:19.23 | Qwell | mick3: okay, so what is your dial line? |
| 04:19.27 | ManWtheMetalBat | LOL |
| 04:19.34 | smcmahon | ~penis |
| 04:19.35 | jbot | [penis] esperanto - past tense of the verb to struggle or fight. |
| 04:19.45 | smcmahon | ~struggle |
| 04:19.53 | smcmahon | ~spirits |
| 04:19.54 | ManWtheMetalBat | jbot: you are confusing smcmahon |
| 04:19.56 | jbot | ManWtheMetalBat: what are you talking about? |
| 04:19.56 | *** join/#asterisk BhaalWTF (n=bhaal@CPE-141-168-108-119.qld.bigpond.net.au) |
| 04:20.03 | *** join/#asterisk Faithful (n=Faithful@202-6-145-116.ip.adam.com.au) |
| 04:20.05 | ManWtheMetalBat | jbot: neverming |
| 04:20.07 | ManWtheMetalBat | d |
| 04:20.24 | smcmahon | jbot: your gay |
| 04:20.45 | smcmahon | ~digital |
| 04:20.47 | jbot | i heard digital is http://russnelson.com/topicdigital.gif |
| 04:20.48 | mick3 | Qwell: i'm sorry, I don't know what you're referring to, where would I find my dial line? |
| 04:21.19 | FuriousGeorge | mick3: at www.voip-info.org |
| 04:21.21 | smcmahon | mick3: when you pick up your phone of course |
| 04:21.25 | *** part/#asterisk BhaalWTF (n=bhaal@CPE-141-168-108-119.qld.bigpond.net.au) |
| 04:22.26 | FuriousGeorge | mick3: what we mean to say, is that if you dont know where you would invoke "dial" you may be better served looking at some documents |
| 04:22.38 | smcmahon | be back gotta call a superior beeing from a payphone down the street. Aliens need my disposition on Analog and Digital communications so they can talk with members of the SETI Program |
| 04:22.50 | FuriousGeorge | mick3: asterisk isnt exactly intuitive. its not like you pick it up and just kinda figure it out |
| 04:22.59 | mick3 | exten => _0800.,2,Dial(SIP/${EXTEN:1}@sipserve,30,r) |
| 04:23.04 | mick3 | this seems to be one of my dial lines |
| 04:23.16 | mick3 | if that's what you mean |
| 04:23.39 | fugitivo | this is not life |
| 04:24.24 | FuriousGeorge | exten => _18XXNXXXXXX,2,Dial(SIP/sipserve/${EXTEN}) try that |
| 04:24.36 | FuriousGeorge | exten => _18XXNXXXXXX,2,Dial(SIP/sipserve/${EXTEN},30,r) try that |
| 04:24.54 | FuriousGeorge | you may need |
| 04:24.54 | fugitivo | will i get a new life? |
| 04:25.08 | FuriousGeorge | exten => _18XXNXXXXXX,2,Dial(SIP/username@sipserve/${EXTEN},30,r) try that |
| 04:25.16 | FuriousGeorge | fugitivo: no but you may learn a new spell |
| 04:25.18 | FuriousGeorge | or something |
| 04:25.47 | FuriousGeorge | i thought we were talking about zelda, nm |
| 04:25.57 | fugitivo | oh |
| 04:26.05 | fugitivo | i like zelda |
| 04:26.33 | fugitivo | i have a lot of spells in nwn |
| 04:26.34 | FuriousGeorge | never a big fan myself, i always prefered warcraft style games. now i just play asterisk and other boring things all day |
| 04:26.47 | mick3 | thanks FuriousGeorge, ill try that |
| 04:26.50 | FuriousGeorge | and of course anything ID does |
| 04:26.50 | fugitivo | yeah, me too |
| 04:27.04 | mick3 | what do the 30,r mean on the end? |
| 04:27.08 | FuriousGeorge | mick3: did you ever sip show registry in cli to see if you had authenticated w/ ur provider |
| 04:27.18 | fugitivo | 30 seconds |
| 04:27.35 | Qwell | You VERY likely don't need/want ,r |
| 04:27.50 | FuriousGeorge | i just threw it in there cuz he had it, whats that retry? |
| 04:28.13 | FuriousGeorge | *what's that? retry? |
| 04:28.30 | FuriousGeorge | ~r |
| 04:28.31 | jbot | A language and environment for statistical computing.. URL: http://www.r-project.org |
| 04:28.33 | mick3 | FuriousGeorge: yeah I did, and I am registered |
| 04:28.43 | fugitivo | wow |
| 04:28.49 | fugitivo | interesting |
| 04:28.53 | mick3 | Qwell: if I pastebin my extensions, could you perhaps take a look at it for me? |
| 04:29.00 | fugitivo | now i have a new life! |
| 04:29.13 | Qwell | FuriousGeorge: force ringing |
| 04:29.23 | FuriousGeorge | ahh, thanks |
| 04:29.44 | fugitivo | THAT is interesting |
| 04:29.53 | FuriousGeorge | fugitivo: what r? |
| 04:29.57 | fugitivo | yes |
| 04:30.10 | FuriousGeorge | *what? r? (damn syntax) |
| 04:30.18 | FuriousGeorge | gotha |
| 04:30.24 | FuriousGeorge | *gotcha |
| 04:30.30 | fugitivo | i'll throw asterisk and start playing with that |
| 04:31.04 | FuriousGeorge | i wonder if they call it r cuzza pearson's r |
| 04:31.17 | FuriousGeorge | fugitivo: you're leaving us? |
| 04:31.25 | fugitivo | nah |
| 04:31.25 | Darwin35 | did it work |
| 04:31.35 | Darwin35 | did you fallow the page |
| 04:31.43 | fugitivo | me? |
| 04:31.59 | Darwin35 | Furious |
| 04:32.11 | Darwin35 | the page for asterisk and sipphone |
| 04:32.20 | FuriousGeorge | Darwin35: u talking to me? for some reason i didnt pastebin the whole thing. i did in fact follow those docs the only difference is the name |
| 04:32.23 | fugitivo | is similar to the S language and environment which was developed at Bell Laboratories |
| 04:32.47 | FuriousGeorge | Darwin35: but no it didnt |
| 04:32.48 | Darwin35 | did it work |
| 04:32.52 | Darwin35 | ok |
| 04:33.00 | Darwin35 | grrrr |
| 04:33.11 | Darwin35 | man |
| 04:33.25 | Darwin35 | it works here so you have major issues man |
| 04:33.35 | fugitivo | what? |
| 04:33.42 | Darwin35 | and thats the setup I have |
| 04:33.46 | *** join/#asterisk snewpy (n=markl@203-214-131-5.dyn.iinet.net.au) |
| 04:33.57 | FuriousGeorge | http://pastebin.ca/23059 <-- thats my real setup |
| 04:34.11 | FuriousGeorge | mick3: i just noticed your pastebins, u still want me to look |
| 04:34.12 | Darwin35 | fug when I talk t o you I will bitch slap you first |
| 04:34.18 | Darwin35 | lol |
| 04:34.35 | fugitivo | who? |
| 04:34.38 | FuriousGeorge | u slap me in a dream you'd better wake up an apologize :) |
| 04:35.06 | mick3 | FuriousGeorge: yes please |
| 04:35.13 | fugitivo | the 5 w |
| 04:35.19 | mick3 | cos I still can't dial out |
| 04:35.32 | *** join/#asterisk rayvd (i=rayvd@arthur.bludgeon.org) |
| 04:35.33 | Darwin35 | well I use the setup from the wiki and it work s fine |
| 04:35.42 | mick3 | please show me this magical setup |
| 04:35.42 | rayvd | Anyone ever run into disappearing dscp/tos bits? |
| 04:36.02 | rayvd | my asterisk box is setting them outbound, but when they arrive on the sip proxy elsewhere on the internet, the bits are no longer set! |
| 04:36.07 | FuriousGeorge | mick3: now lemme see extensions |
| 04:36.13 | rayvd | common for routers to be set up to strip 'em? |
| 04:36.28 | Darwin35 | ok look |
| 04:36.45 | mick3 | FuriousGeorge: will just paste it |
| 04:36.52 | FuriousGeorge | not here |
| 04:36.56 | Darwin35 | this room needs to rooms one for those runing cvs head and beta 1 and a room for those on pre 1.2 |
| 04:37.04 | Darwin35 | so we know who is where |
| 04:37.28 | Darwin35 | its hard to fix 1.0.X when your on 1.2beta or 1.2 cvs head |
| 04:37.42 | Darwin35 | with the context diffs |
| 04:37.49 | fugitivo | i'm in 1.0.x |
| 04:37.53 | fugitivo | who needs help? |
| 04:37.58 | Darwin35 | move to beta1 |
| 04:38.10 | Darwin35 | cathup with the world |
| 04:38.10 | fugitivo | i can't |
| 04:38.11 | mick3 | FuriousGeorge: http://pastebin.com/365233 |
| 04:38.12 | FuriousGeorge | yeah, i think us guys using the stable release should stay here and all of yall can make ur own room |
| 04:38.27 | fugitivo | i agree with george |
| 04:38.35 | fugitivo | #asterisk-head |
| 04:38.36 | Darwin35 | head is more stable the the 1.0.x |
| 04:38.44 | Darwin35 | and loads more featurees |
| 04:38.52 | *** join/#asterisk charles___ (n=charles_@c-71-57-176-6.hsd1.fl.comcast.net) |
| 04:38.58 | rayvd | is the jitter buffer driver in head pretty stable? |
| 04:39.04 | fugitivo | mine isn't unstable |
| 04:39.09 | rayvd | was considering trying out head for that feature in specific |
| 04:39.10 | Darwin35 | #asterisk-head sounds like a sex room |
| 04:39.14 | rayvd | lol |
| 04:39.24 | Qwell | #asterisk-head forwards to #asstricks |
| 04:39.39 | fugitivo | #head-asterisk |
| 04:39.51 | Darwin35 | #asterisk-cvs |
| 04:39.54 | FuriousGeorge | mick3: im kinda new myslef, but can you start a context on priority 3 like that? any reason you didnt start with priority 1? |
| 04:40.03 | mick3 | no there isn't, i just didn't |
| 04:40.10 | mick3 | surely that wouldn't make much difference? |
| 04:40.10 | FuriousGeorge | and shouldnt you have curlys around ${EXTEN} |
| 04:40.27 | mick3 | there are |
| 04:40.35 | mick3 | they're green |
| 04:40.41 | mick3 | look closer |
| 04:40.50 | fugitivo | green? |
| 04:40.58 | mick3 | syntax highlighting makes them green :) |
| 04:41.07 | fugitivo | lol |
| 04:41.15 | FuriousGeorge | mick3: ur using 1.2? |
| 04:41.31 | mick3 | 1.0.9 |
| 04:41.34 | mick3 | Asterisk 1.0.9-BRIstuffed-0.2.0-RC8h |
| 04:41.44 | Qwell | 0800 is not a valid US phone number |
| 04:41.49 | mick3 | Qwell: yes, I live in NZ |
| 04:41.55 | FuriousGeorge | i assume hes in australia or something |
| 04:41.57 | fugitivo | Qwell: in argentina it's valid |
| 04:41.59 | Qwell | ok |
| 04:42.12 | Qwell | You don't need anything in front of it, like you would need a 1 in the US? |
| 04:42.14 | fugitivo | mick3: that's an ugly package |
| 04:42.16 | FuriousGeorge | fugitivo: did i ever tell you how to make a million dollars in argentina |
| 04:42.16 | mick3 | nope |
| 04:42.20 | mick3 | just 0800 |
| 04:42.25 | mick3 | fugitivo: is it? |
| 04:42.27 | fugitivo | FuriousGeorge: no, tell me please! |
| 04:42.36 | mick3 | perhaps I should just download the latest asterisk and start again |
| 04:42.38 | Vco | pimp off Paris Hilton? |
| 04:42.38 | fugitivo | mick3: debian? |
| 04:42.42 | FuriousGeorge | mick3: are you using all those macros and stuff in extensions.conf |
| 04:42.49 | mick3 | fugitivo: yeah, it's a package from xorcom.com |
| 04:42.51 | fugitivo | FuriousGeorge: tell me! tell me! |
| 04:42.54 | mick3 | FuriousGeorge: i'm not sure, probably not |
| 04:43.41 | FuriousGeorge | fugitivo: compras un argentino por lo que vale, y lo vendes por lo que crea que vale |
| 04:43.42 | fugitivo | mick3: maybe you should get cvs if it's not a production system |
| 04:43.53 | fugitivo | aaaaaaaaahhhhh LOL |
| 04:44.09 | fugitivo | FuriousGeorge: that way i can make billions of dollars |
| 04:44.26 | FuriousGeorge | my families gallego, i sure you've head a couple of those jokes |
| 04:44.38 | fugitivo | hehe |
| 04:45.01 | fugitivo | yes we have |
| 04:45.08 | FuriousGeorge | mick3: can i suggest you change priorities to 1,2, and so on, and backup that extensions.conf and start with one that implements only what you have |
| 04:46.03 | smcmahon | Just learned that ANI Reports a code of 72 from a Qwest pay phone in salem oregon for anyone interested. |
| 04:46.30 | FuriousGeorge | mick3: and just to make sure its not a syntax thing, use exten => _.,1,dial(sip/sipserv/${EXTEN},30) |
| 04:47.00 | Qwell | 72 is an unassigned ANI2 code |
| 04:47.23 | FuriousGeorge | mick3: mv extensions.conf to extension.conf.bak, and next time you start asterisk, with your simplified dialplan, make sure its verbose (asterisk -cvvvvvvvvvvvvvvvv) and tell me what the output says |
| 04:47.25 | file[laptop] | uh yeah our circuit is slightly screwed up |
| 04:47.25 | file[laptop] | SO |
| 04:47.29 | file[laptop] | they sometimes deliver ANI2 backwards |
| 04:47.44 | Qwell | 27 is a payphone :p |
| 04:47.46 | file[laptop] | thus it's 27 |
| 04:47.49 | FuriousGeorge | mick3: and if i cant help you, just constantly post the output of sip debug on to Qwell. thats why hes here |
| 04:48.12 | Qwell | smcmahon: http://artofhacking.com/files/callerid/ANI2.TXT |
| 04:48.24 | mick3 | ok |
| 04:48.29 | mick3 | FuriousGeorge: i'l try that now |
| 04:49.44 | smcmahon | In salem it is 72 |
| 04:49.56 | file[laptop] | it's 27. |
| 04:50.10 | smcmahon | ok so it's backwards |
| 04:50.15 | file[laptop] | yes. |
| 04:50.30 | smcmahon | Called BKW on his 800 and It says 72 |
| 04:50.43 | mick3 | still 404 :(:( |
| 04:50.47 | mick3 | here is my extensions.conf |
| 04:50.50 | Darwin35 | http://pastebin.ca/23062 there is a sip.conf that work for broadvoice asterlink and sipphone. with 1 extension mapped. |
| 04:51.05 | smcmahon | What does COCOT stand for? |
| 04:51.14 | smcmahon | File should know this |
| 04:51.40 | file[laptop] | why, and why should I care? |
| 04:51.57 | smcmahon | Just wondering if you know what it stands for |
| 04:51.57 | mick3 | ok |
| 04:52.09 | mick3 | whenever I try to dial out, log says 'Cannto find extension content 'defualt' |
| 04:52.11 | mick3 | what do I do? |
| 04:52.35 | FuriousGeorge | put [default] at the top of extensions.conf |
| 04:52.41 | mick3 | ok |
| 04:53.07 | mick3 | still 404 |
| 04:53.08 | FuriousGeorge | do you have context=(name in extensions.conf) in sip.conf |
| 04:53.10 | file[laptop] | customer owned coin operated telephone, simple Google away |
| 04:53.22 | mick3 | yes, I have context=default |
| 04:53.28 | FuriousGeorge | link me to your new extensions and sip.conf |
| 04:53.56 | smcmahon | http://www.alleged.com/telephone/Payphone-Directory-Mirror/payor.html |
| 04:54.01 | FuriousGeorge | mick3: default is the default context for incomming calls which is defined at the top of sip.conf |
| 04:54.02 | smcmahon | Link to all the payphones in oregon |
| 04:54.09 | mick3 | sip.conf: http://pastebin.com/365239 |
| 04:54.17 | FuriousGeorge | otoh, you had context=sip-outgoing before |
| 04:54.30 | FuriousGeorge | and you had sip-outgoing in extensions.conf which is good |
| 04:54.37 | mick3 | extensions.conf: http://pastebin.com/365240 |
| 04:54.38 | smcmahon | LOL it would be funny to program asterisk to spawn mutiple extensions to call all the payphones at once. Thus making the whole city ring at once |
| 04:55.05 | Vco | smcmahaon is a terrorist |
| 04:55.13 | mick3 | smcmahon is a douche |
| 04:55.17 | Vco | *bag* |
| 04:55.27 | smcmahon | mick3 is gay |
| 04:55.38 | smcmahon | wait i take that back |
| 04:55.40 | FuriousGeorge | lemme see sip.conf |
| 04:55.43 | smcmahon | mick3 is a transvestite |
| 04:56.02 | Vco | so then he's just sexually ambiguous? |
| 04:56.29 | smcmahon | sure thats it |
| 04:56.36 | mick3 | FuriousGeorge: [16:54:33] (mick3): sip.conf: http://pastebin.com/365239 |
| 04:56.50 | Vco | speaking of gay |
| 04:56.58 | Vco | dtmf is being gay lately.. |
| 04:57.11 | FuriousGeorge | mick3: you only pasted the top half |
| 04:57.12 | smcmahon | Would it be considered a terrorist act to make all the payphones in your city ring all at once? |
| 04:57.17 | mick3 | oh |
| 04:57.22 | Vco | under your current government? yes |
| 04:57.26 | Qwell | smcmahon: it could, yes |
| 04:57.38 | smcmahon | Vco, What goverment do you reside under? |
| 04:58.08 | Vco | why the goverment of Petoria of course... |
| 04:58.17 | smcmahon | Woo Hoo |
| 04:58.39 | mick3 | FuriousGeorge: http://pastebin.com/365241 |
| 04:59.39 | smcmahon | LOL program asterisk to call all the payphones and when someone picks up announce "This is not a test. There is a bomb in the area where your hearing this message. Please hang up, Run like hell and Get out of here" :) |
| 05:00.17 | FuriousGeorge | :| |
| 05:00.19 | smcmahon | LOL If you hold the phone up to your ass and fart, it could be considered a terrorist threat... |
| 05:00.23 | Darwin35 | http://pastebin.ca/23062 there is a sip.conf that work for broadvoice asterlink and sipphone. with 1 extension mapped. Furious here is one that works |
| 05:00.27 | mick3 | FuriousGeorge: any ideas? |
| 05:00.34 | Darwin35 | its right off a working system |
| 05:00.47 | smcmahon | What is the problem mick3 ? |
| 05:00.51 | FuriousGeorge | anyay, i gotta say mick3 everything looks fine... what im thinking is.... |
| 05:00.54 | *** join/#asterisk zoo (i=nobody@ip-113-16.travedsl.de) |
| 05:01.16 | Darwin35 | thats not funny |
| 05:01.21 | FuriousGeorge | what does it say in asterisk cli when you dial out |
| 05:01.26 | mick3 | smcmahon: i cant dial out, everything (cept local extensions) return 404 |
| 05:01.55 | smcmahon | Okay what are you dialing out to for service? |
| 05:02.03 | *** part/#asterisk zoo (i=nobody@ip-113-16.travedsl.de) |
| 05:02.03 | mick3 | my voip provider |
| 05:02.06 | FuriousGeorge | 404 is your client, its much more helpful to tell us what asterisk says |
| 05:02.09 | FuriousGeorge | when you dial out |
| 05:02.11 | mick3 | the cli doens't seem to say anything |
| 05:02.11 | smcmahon | Which specific voip provider |
| 05:02.18 | mick3 | smcmahon: sipserve.net.nz |
| 05:02.21 | Qwell | mick3: set verbose 50 |
| 05:02.22 | Qwell | try the call again |
| 05:02.27 | FuriousGeorge | have you restarted asterisk since you made these changes |
| 05:02.29 | Qwell | pastebin exactly what the CLI says |
| 05:02.32 | mick3 | FuriousGeorge: yes |
| 05:02.42 | mick3 | er |
| 05:02.46 | FuriousGeorge | like Qwell said asterisk -cvvvvvvvvvvvvvvvvvvvvvvvvvvvvv |
| 05:02.47 | mick3 | cli still doesn't say anything |
| 05:02.50 | mick3 | asterisk*CLI> set verbose 50 |
| 05:02.50 | mick3 | Verbosity was 8 and is now 50 |
| 05:02.56 | smcmahon | uhh a simple command "reload" works besides restarting asterisk |
| 05:02.56 | Qwell | great, now call again |
| 05:03.11 | FuriousGeorge | smcmahon: lets go one step at a time with mick3 |
| 05:03.43 | mick3 | I hate to tell you this, but the cli isn't showing anything |
| 05:03.46 | smcmahon | okay... Umm. 404 Errors suck .... Been there almost a year ago. Thinking of differnet situations this can occur from |
| 05:03.52 | mick3 | even though I've set verbose to 50 |
| 05:03.55 | Qwell | mick3: Then WHERE does it give the 404? |
| 05:03.56 | FuriousGeorge | sip show users |
| 05:03.57 | smcmahon | did you load asterisk in verbose mode? |
| 05:04.02 | mick3 | Qwell: on xlite |
| 05:04.06 | Qwell | ... |
| 05:04.10 | mick3 | smcmahon: yeah, I used asterisk -vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvr |
| 05:04.15 | mick3 | Qwell: my softphone, xten xlite |
| 05:04.15 | Qwell | So its not an asterisk problem |
| 05:04.24 | smcmahon | It's X-Lite which sucks |
| 05:04.30 | mick3 | nah |
| 05:04.31 | smcmahon | I have it on my workstation |
| 05:04.38 | Qwell | bkw__: I'm borrowing this |
| 05:04.40 | Qwell | NEXT!!! |
| 05:04.40 | mick3 | I could do the same thing with my hardphone, and it does the same thing |
| 05:04.51 | mick3 | it just goes beep beep beep instead |
| 05:04.52 | FuriousGeorge | mick3: what are you using as a client |
| 05:04.58 | mick3 | FuriousGeorge: xten xlite |
| 05:04.59 | Qwell | mick3: You need to setup your hardphone and softphone to use asterisk |
| 05:05.06 | smcmahon | What happens when you use your hardphone specifically mick3? |
| 05:05.07 | mick3 | Qwell: which I've done |
| 05:05.13 | FuriousGeorge | may want to make an entry for xlite in sip.conf see if that helps |
| 05:05.20 | Qwell | mick3: sip debug, call again |
| 05:05.29 | Qwell | pastebin every single line you get |
| 05:05.43 | Qwell | if you get absolutely nothing, your configs on your phones are horribly broken |
| 05:05.54 | mick3 | ok pasting now |
| 05:06.34 | mick3 | http://pastebin.com/365244 |
| 05:06.36 | FuriousGeorge | mick3: are you sure your client is logging into asterisk |
| 05:06.42 | FuriousGeorge | sip show friends in asterisk cli |
| 05:07.08 | mick3 | asterisk*CLI> sip show friends |
| 05:07.08 | mick3 | No such command 'sip show friends' (type 'help' for help) |
| 05:07.30 | smcmahon | Line 37... What does... SIP/2.0 407 Proxy Authentication Required |
| 05:07.36 | FuriousGeorge | mick3: i mean users |
| 05:07.40 | FuriousGeorge | sip show users |
| 05:07.54 | mick3 | asterisk*CLI> sip show users |
| 05:07.54 | mick3 | Username Secret Accountcode Def.Context ACL NAT |
| 05:07.54 | mick3 | 510 default No Alway |
| 05:07.54 | mick3 | 509 default No Alway |
| 05:07.54 | mick3 | 508 default No Alway |
| 05:07.56 | mick3 | etc etc |
| 05:08.42 | Qwell | Looking for 0800400600 in default |
| 05:08.42 | Qwell | SIP/2.0 404 Not Found |
| 05:08.53 | Qwell | Where is your extensions.conf? |
| 05:08.55 | smcmahon | Why is NAT even on. Shouldn't the port be forwarded to asterisk for better reliability? |
| 05:09.21 | FuriousGeorge | did you try => ._,1,Dial(SIP/username@sipserve/${EXTEN},30) |
| 05:09.21 | Qwell | show me your default context |
| 05:09.26 | mick3 | FuriousGeorge: yes |
| 05:09.33 | Qwell | FuriousGeorge: That won't work, and NEVER use _. |
| 05:09.39 | Qwell | never ever, ever |
| 05:09.42 | FuriousGeorge | Qwell: i thought it was ok for testing |
| 05:09.46 | Qwell | no, never |
| 05:09.47 | FuriousGeorge | which is what we are doing |
| 05:09.52 | mick3 | Qwell: http://pastebin.com/365240 |
| 05:09.52 | Qwell | _X., if you must |
| 05:09.55 | FuriousGeorge | fine |
| 05:09.58 | JerJer | yeah i want to send 'i' or 't' or 's' to my sip provider |
| 05:10.12 | Qwell | mick3: default is empty, why? |
| 05:10.26 | Qwell | sip-outgoing is not the context your phones are looking for |
| 05:10.38 | mick3 | oh, I thought it was |
| 05:10.40 | Qwell | and why the hell are you starting at priority 4? |
| 05:10.53 | FuriousGeorge | i told him to stick it up there cuz * was complaining he never defined it, but i thought that was the default context for incomming calls where he is trying to call out |
| 05:10.58 | Qwell | and don't use _., because its stupid |
| 05:11.00 | mick3 | since sip-outgoing is referenced in my voip provider sip.conf entry |
| 05:11.07 | mick3 | ok, I'll make those changes and then paste a new extensions.conf |
| 05:11.12 | Qwell | mick3: but NOT by your phone |
| 05:11.15 | Qwell | which is what matters |
| 05:11.21 | Qwell | do this |
| 05:11.26 | Qwell | one sec |
| 05:11.45 | mick3 | k |
| 05:12.20 | FuriousGeorge | oh yeah, look at that, you got no context for your client |
| 05:12.26 | Hogie | here I am sitting at my desk, and my upstairs neighbors start having sex on their bed located above me:\ |
| 05:12.32 | Hogie | im sooo lonely |
| 05:12.36 | Qwell | http://pastebin.com/365246 |
| 05:12.52 | Qwell | I made three changes - find them |
| 05:13.08 | Hogie | oops, wrong damn network |
| 05:13.18 | Qwell | and, what is in extensions-def.conf ? |
| 05:13.27 | FuriousGeorge | Qwell: also, if you look at his sip.conf, shouldnt he put his client in a context like sip-outgoing |
| 05:13.29 | Qwell | If you have [default] in there, its going to screw things up |
| 05:13.42 | Qwell | FuriousGeorge: yes, eventually. I just said to include sip-outgoing as a test |
| 05:13.53 | Qwell | probably a dumb test, since I have no clue whats in that other .conf |
| 05:14.11 | Qwell | $20 says [default] is already defined elsewhere |
| 05:14.21 | *** join/#asterisk KaBewM (n=DA-MAN@24-180-28-208.dhcp.psdn.ca.charter.com) |
| 05:14.33 | FuriousGeorge | hes got his provider as [sip-outgoing] (peer) but his client has no context defined, i think that may be his problem |
| 05:14.39 | mick3 | extensions-def: http://pastebin.com/365247 |
| 05:14.43 | Qwell | FuriousGeorge: walk him through it |
| 05:14.53 | Qwell | ahh, ok |
| 05:15.10 | FuriousGeorge | mick3: context=sip-outgoing in [501] section or whatever client you are using |
| 05:15.15 | mick3 | awesome, it seems to work now |
| 05:15.25 | FuriousGeorge | what did it? |
| 05:15.26 | Qwell | good, now remove the include => line I said to add, and listen to FuriousGeorge |
| 05:15.44 | mick3 | will change the extension content now |
| 05:15.53 | Darwin35 | get asterisk out of my mind so I can go to sleep |
| 05:16.09 | FuriousGeorge | Qwell: i believe you walked me thru my first outgoing call not long ago |
| 05:16.16 | Qwell | FuriousGeorge: dunno |
| 05:16.21 | Darwin35 | I just kep editing my extensions.conf addinng and editing adding and editing |
| 05:16.23 | FuriousGeorge | it was a special moment |
| 05:16.28 | FuriousGeorge | few months back |
| 05:16.30 | FuriousGeorge | u da man! |
| 05:16.31 | Qwell | FuriousGeorge: paypal.com |
| 05:16.31 | Qwell | :P |
| 05:16.42 | FuriousGeorge | actually it was JerJer |
| 05:16.52 | FuriousGeorge | ;) |
| 05:17.57 | zobia | Hello everybody |
| 05:18.00 | mick3 | now, how do I get incoming going? :) |
| 05:18.02 | mick3 | (pstn) |
| 05:18.17 | zobia | I need help for a dialplan problem |
| 05:18.20 | mick3 | iv'e set the context in my zapata.conf to pstn-incoming |
| 05:18.20 | FuriousGeorge | mick3: ask Qwell :) |
| 05:18.28 | mick3 | [pstn-incoming] |
| 05:18.29 | mick3 | exten => 501,1,Dial(SIP/501,20) |
| 05:18.35 | mick3 | does that syntax look correct? |
| 05:18.46 | Qwell | looks about right |
| 05:18.48 | zobia | i want to play a voice file then play a tone . i use wait(1) to play a tone .but it did not play the sound. |
| 05:19.00 | zobia | any other way to play a tone? |
| 05:19.12 | Qwell | zobia: playtones. What type of tone exactly? |
| 05:19.15 | Qwell | dtmf? |
| 05:19.17 | FuriousGeorge | mick3: under default... |
| 05:19.42 | FuriousGeorge | exten=> (ur#),1,Answer |
| 05:20.01 | Qwell | FuriousGeorge: If you pass the call like that without answering, you don't get charged unless the phone answers |
| 05:20.24 | FuriousGeorge | Qwell: i should really use that :) |
| 05:20.47 | FuriousGeorge | he also needs the user account defined in sip.conf |
| 05:21.01 | mick3 | which user account |
| 05:21.10 | JerJer | that user account |
| 05:21.17 | Qwell | 501 |
| 05:21.18 | mick3 | -- Starting simple switch on 'Zap/1-1' |
| 05:21.18 | mick3 | == Starting Zap/1-1 at default,s,1 failed so falling back to exten 's' |
| 05:21.18 | mick3 | == Starting Zap/1-1 at default,s,1 still failed so falling back to context 'default' |
| 05:21.24 | mick3 | yeah, it is defined in sip.conf |
| 05:21.27 | FuriousGeorge | [sipphone] |
| 05:21.27 | FuriousGeorge | ; For incoming calls only. Example: FWD (Free World Dialup) |
| 05:21.27 | FuriousGeorge | type=user |
| 05:21.28 | FuriousGeorge | context=inbound |
| 05:21.46 | FuriousGeorge | ur context is default |
| 05:21.50 | Qwell | mick3: because you have nothing IN default |
| 05:22.09 | mick3 | hmn, ok |
| 05:22.12 | Qwell | but... |
| 05:22.23 | Qwell | double check your zap configs, make sure you have the context in the right place |
| 05:22.37 | Qwell | <mick3> iv'e set the context in my zapata.conf to pstn-incoming |
| 05:22.42 | zobia | please take a look at my script http://pastebin.ca/23065 |
| 05:22.53 | *** join/#asterisk Uberbot (n=Uberbot@69.252.219.76) |
| 05:22.54 | zobia | can i play a tone after play 'enter_pin' |
| 05:23.13 | Qwell | zobia: I already asked you a question... |
| 05:23.29 | zobia | oh. sorry Qwell , i did not see ur question |
| 05:23.37 | Qwell | What type of tone do you want to play? |
| 05:23.43 | Uberbot | Hi all. |
| 05:23.51 | fugitivo | zobia: beep |
| 05:24.14 | Qwell | fucking people keep trying to take my pens |
| 05:24.16 | fugitivo | zobia: playback(beep) |
| 05:24.27 | zobia | okay. thanx. |
| 05:24.43 | *** join/#asterisk wasim (n=wasim@pdpc/supporter/active/wasim) |
| 05:24.52 | FuriousGeorge | Qwell: actually since we are talking about inbound calling i got a wierd issue. i just got my inbound FWD working, but the only fricken way is to comment out my outbound |
| 05:25.16 | fugitivo | is fwd working? |
| 05:25.25 | Qwell | FuriousGeorge: outbound FWD? |
| 05:25.26 | FuriousGeorge | http://pastebin.ca/23067 |
| 05:25.26 | fugitivo | yeaaaaaa |
| 05:25.29 | fugitivo | it's working! |
| 05:25.45 | fugitivo | last week iax registration with fwd was broken |
| 05:25.45 | FuriousGeorge | outbound works |
| 05:26.01 | fugitivo | or was it 2 weeks ago? |
| 05:26.02 | FuriousGeorge | and inbound works when i comment out outbound |
| 05:26.02 | Qwell | FuriousGeorge: because you have a type=friend AND type=user with the same name |
| 05:26.17 | Qwell | change your friend to a peer or something |
| 05:26.30 | FuriousGeorge | i just changed that from peer/user. i thought they could be the same |
| 05:26.30 | Qwell | seperate it, so it isn't a friend |
| 05:26.40 | Qwell | friend = user + peer |
| 05:26.56 | JerJer | don't be lazy and use separate user's and peer's |
| 05:27.01 | FuriousGeorge | oh right. but it was peer before and same issue, i just changed it on some1's suggestion recently |
| 05:27.10 | FuriousGeorge | ill try again |
| 05:29.09 | FuriousGeorge | ok now its friend and peer and same issue. lemme comment out the peer and see if it starts working |
| 05:30.38 | wasim | don't use friend |
| 05:30.50 | FuriousGeorge | Qwell: yup, when i comment out the entry for peer it starts working, but obviously outbound wont go. i also tried renaming the user, but nothing |
| 05:30.53 | FuriousGeorge | isnt that strange |
| 05:31.15 | Qwell | don't use friend, heh |
| 05:31.17 | wasim | no |
| 05:31.19 | Qwell | user and peer |
| 05:31.29 | Qwell | not user and friend, nor peer and friend |
| 05:31.49 | Uberbot | Anyone have any hints as to why CID isn't working on my incoming zap device? |
| 05:31.58 | Uberbot | It used to. |
| 05:32.00 | FuriousGeorge | Qwell: i know what you mean, i changed it back to peer |
| 05:32.00 | Qwell | Uberbot: callerid=yes in your config? |
| 05:32.15 | Uberbot | In zapata.conf, yes. |
| 05:32.22 | wunderkin | i think there was a bug in head |
| 05:32.27 | Qwell | usecallerid=yes, rather |
| 05:32.45 | Uberbot | usecallerid=yes |
| 05:32.47 | Uberbot | Yes. |
| 05:32.48 | FuriousGeorge | Qwell: i had it as friend for one test run when i basically ran out of ideas, but the rest of the time, and now, its peer |
| 05:33.11 | Qwell | FuriousGeorge: well, what happens? |
| 05:33.46 | FuriousGeorge | nothing, CLI doesnt say a thing |
| 05:33.57 | *** join/#asterisk sams (n=sams@pcp424683pcs.naugus01.ga.comcast.net) |
| 05:33.57 | Qwell | sip debug, set verbose 50 |
| 05:33.58 | FuriousGeorge | unless i comment out the peer entry and then everything is normal |
| 05:34.27 | Uberbot | My other phone that's plugged in in parallel to the zap is getting CID..... |
| 05:34.33 | *** join/#asterisk hellagony (n=egutierr@201.230.140.227) |
| 05:35.08 | sams | anyone have any suggestions for a voip provider with low latency and good sound quality? (currently with VoicePulse and they are great except for pricing and lack of some features) |
| 05:35.20 | wasim | sams: nufone |
| 05:35.27 | Uberbot | I've got it (temporarlily) going through a DSL filter before it goes to the zap. Could a DSL filter block CID? |
| 05:35.33 | niZon | i found sixtel has greatly improved... |
| 05:35.35 | FuriousGeorge | Qwell: still noting, goes straight to the provider's vm |
| 05:35.48 | sams | wasim, isn't nufone expensive? |
| 05:35.52 | FuriousGeorge | unless i comment out the peer part in which case all is normal |
| 05:36.02 | wasim | sams: not for low latency and good quality, it isn't |
| 05:36.19 | FuriousGeorge | except outgoing calling via fwd, which still dont work |
| 05:36.36 | *** join/#asterisk scardinal (n=supreme@port816.ds1-suoe.adsl.cybercity.dk) |
| 05:36.38 | *** join/#asterisk shaZwaz (n=chatzill@203.81.196.167) |
| 05:36.48 | FuriousGeorge | i mean: inbound only works when i comment out outbound |
| 05:37.16 | shaZwaz | hi all |
| 05:37.42 | FuriousGeorge | hey |
| 05:37.54 | sams | wasim, so it looks like nufone charges $7.50/month for the phone number, right? |
| 05:38.10 | shaZwaz | hi wasim bhai |
| 05:38.26 | wasim | sams: i don't think they had a flat fee, it may have changed, lookit their website |
| 05:38.38 | Qwell | for an MI DID, yes, $7.50 |
| 05:38.41 | wasim | shaZwaz: did you see the ashes? |
| 05:38.49 | shaZwaz | :) |
| 05:38.57 | wasim | ok, thats right, they didn't have any flat fee for the toll free numbers |
| 05:39.15 | shaZwaz | not much , but heard a lot |
| 05:39.36 | X-Rob | bloody poms. |
| 05:39.37 | wasim | shaZwaz: best test series i've seen |
| 05:39.52 | wunderkin | Uberbot: my last comment was to you, are you using head? |
| 05:39.55 | shaZwaz | a rare one\ |
| 05:39.57 | sams | wasim, they don't seem to have too much detailed info on their site... when I go to sign up, they let me type in a phone number... do I just pick any number I want? |
| 05:40.35 | Hogie | 877 THE P0RN was free last I checked (about 3 weeks ago?) |
| 05:40.35 | Darwin35 | ok try this again night all chat tomarrow |
| 05:41.08 | Qwell | sams: Thats to get a vanity DID |
| 05:41.28 | Qwell | for tollfree, its not free to get a vanity DID |
| 05:41.30 | FuriousGeorge | Qwell: any idea's about my strange problem there? sip debug didnt say anything when i had my outgoing uncommented |
| 05:41.31 | Qwell | no clue about local |
| 05:41.56 | wasim | FuriousGeorge: do you have any type=friend ? |
| 05:42.17 | FuriousGeorge | my sip clients but none of them are named proxy01.sipphone.com |
| 05:42.18 | shaZwaz | wasim did you hear what wasim akram said |
| 05:42.23 | FuriousGeorge | xlites |
| 05:42.31 | wasim | shaZwaz: no, i don't trust namesakes |
| 05:42.39 | shaZwaz | ha ha |
| 05:44.08 | sams | ahh, nufone only supports Michigan phone numbers... that is kinda pointless |
| 05:44.11 | FuriousGeorge | i think im gonna call it a night, screw the fwd |
| 05:44.55 | Hogie | sams: depends what you use them for. We use them for outbound LD & incoming 800's... haven't had a problem in a year |
| 05:45.37 | shaZwaz | screw fwd |
| 05:46.01 | wasim | sams: same here for atleast 2+ years now |
| 05:46.04 | shaZwaz | doesn't go well with * |
| 05:46.48 | wasim | yep, we got our first nufone account 29 may 2003 |
| 05:46.49 | sams | do you guys know if there are any additional charges for those 800 numbers beyond the 2c/min and the 25$ setup fee? |
| 05:47.03 | Hogie | there isn't a $25/setup unless you get a vanity number |
| 05:47.03 | *** join/#asterisk e-Hernick (n=ncc@modemcable120.39-131-66.mc.videotron.ca) |
| 05:47.04 | FuriousGeorge | sams: the 25 is only for a vanity nmber |
| 05:47.14 | FuriousGeorge | a plain old 800 did is free |
| 05:47.20 | FuriousGeorge | and no, no ther charges |
| 05:47.37 | FuriousGeorge | well, you owe JerJer a favor, but he'll explain that later |
| 05:47.49 | shaZwaz | wasim can you suggest a reliable provider for SIP/IAX call termination to pk ? |
| 05:48.00 | FuriousGeorge | pk? |
| 05:48.19 | wasim | shaZwaz: worldcall |
| 05:48.28 | FuriousGeorge | pakistan? |
| 05:48.31 | shaZwaz | :-/ |
| 05:48.31 | wasim | shaZwaz: but they don't do retail, only wholesale |
| 05:48.56 | sams | ok, so nufone is the recommendation for outbound and 800 inbound, what about a local inbound number? should I just get a standard pots line for that? |
| 05:48.57 | shaZwaz | I am talking about UK /US DIDs |
| 05:49.04 | e-Hernick | Hey, I'm working on an IVR with Asterisk 1.2.. Using AEL.. Most everything works just great, but I have a problem; my SIP dialout provider, VoipJet, can be unreliable. Sometimes, calls don't go through; when that happens, I want Asterisk to call again using my fallback SIP provider. |
| 05:49.07 | e-Hernick | Any ideas ? |
| 05:49.33 | wasim | shaZwaz: what do UK/US DID have to do with PK termination? |
| 05:49.38 | shaZwaz | incidentally all the bw to world call is provided by our co |
| 05:50.08 | wasim | shaZwaz: worldcall are launching their PK DID now ... H323 SIP IAX |
| 05:50.14 | Hogie | e-Hernick: easy... |
| 05:50.18 | Hogie | after your Dial |
| 05:50.19 | sams | e-Hernick, does it the dial command get an error and go to pri+101 or does it look like its working but its not actually doing anything? |
| 05:50.22 | X-Rob | e-Hernick - type 'show application Dial' |
| 05:50.23 | Hogie | do pri+101 |
| 05:50.30 | shaZwaz | I mean calls from UK/US |
| 05:50.35 | X-Rob | Oi. |
| 05:50.37 | shaZwaz | IAX |
| 05:50.40 | X-Rob | pri+101 is _depreciated_ |
| 05:50.42 | shaZwaz | yo |
| 05:50.46 | X-Rob | you shuould be checking DIALSTATUS |
| 05:50.53 | shaZwaz | you mean * ? |
| 05:50.54 | e-Hernick | Well, I'm checking DIALSTATUS. |
| 05:50.55 | X-Rob | <PROTECTED> |
| 05:50.55 | X-Rob | <PROTECTED> |
| 05:51.00 | shaZwaz | well well |
| 05:51.10 | e-Hernick | But it doesn't seem to be working so well..When transfers fail, I get a weird tone |
| 05:51.22 | e-Hernick | And I'm not sure asterisk detects the call failure |
| 05:51.24 | X-Rob | you should be getting CHANUNAVAIL |
| 05:51.45 | X-Rob | However, there _are_ bugs in AEL still |
| 05:52.11 | X-Rob | paste your AEL code to pastebin, along with what 'show dialplan whatever' thinks it is |
| 05:52.15 | X-Rob | ~pb |
| 05:52.17 | jbot | rumour has it, pastebin is a place to paste your stuff without flooding the channel - try http://pastebin.ca/ |
| 05:52.35 | sams | if * is not getting a failure response back then your provider is basically locking it up... think you may have to just wait for a timeout and then try to dial with something else |
| 05:53.05 | e-Hernick | This is my code http://pastebin.ca/23069 |
| 05:53.10 | e-Hernick | I'm checking dialstatus |
| 05:53.15 | *** join/#asterisk toddf (n=toddf@ns0.fries.net) |
| 05:53.36 | e-Hernick | this is my first AEL application, 470 lines now for the whole app |
| 05:53.46 | e-Hernick | I sure like AEL more than extensions.conf |
| 05:54.36 | e-Hernick | Though I find it somewhat lacking as a language. It's no python, and damn, is it capricious about syntax. |
| 05:55.10 | shaZwaz | wasim I don't want PK DIDs for now, looking for UK/US DIDs for call termination to * |
| 05:55.24 | wasim | shaZwaz: US nufone, UK magrathea |
| 05:55.41 | X-Rob | e-Hernick - indeed it is. Stick a 'NoOp(${DIALSTATUS}) after the dial command, see if it's not being set correctly |
| 05:56.16 | shaZwaz | I will be using these for support , so must be reliable |
| 05:56.27 | wasim | how do you goto to a particular line in a an extension in ael? like how would Goto(context|extension|priority) be done in ael? |
| 05:56.35 | *** join/#asterisk Romik (n=romik_@84.77.131.158) |
| 05:56.36 | e-Hernick | Good idea. though debugging this problem is not so easy, since it occurs at random. Can't reproduce it at will.. |
| 05:56.37 | wasim | shaZwaz: both of these are rock solid |
| 05:57.04 | e-Hernick | I was wondering if anybody had already developed an AEL dialer with fallback dialout provider |
| 05:57.12 | X-Rob | e-Hernick - having the debug there will help you diagnose it when it does fail |
| 05:57.15 | e-Hernick | But I figure not, since AEL is so young :) |
| 05:57.18 | e-Hernick | X-Rob, indeed |
| 05:57.22 | wasim | i got the context|extension bit, but how would you hit a particular line in an extension? |
| 05:57.43 | e-Hernick | it's added. |
| 05:58.32 | e-Hernick | Is it just me or does the gsm codec used for sounds... plain suck |
| 05:58.47 | e-Hernick | I'm using plain old pcm wav now |
| 05:58.57 | e-Hernick | It's a boost in sound quality.. And I can spare a few extra megs |
| 05:59.08 | e-Hernick | I wonder why gsm is recommended at all |
| 05:59.31 | e-Hernick | Is there ANY benefit from using godawful gsm compression, other than saving up to a few worthless megs ? |
| 05:59.38 | *** join/#asterisk wafro (i=matt@i216-58-44-251.cybersurf.com) |
| 05:59.38 | shaZwaz | wasim choose one IAX / SIP ? u think wud be better in this scenario |
| 05:59.48 | e-Hernick | IMHO IAX > SIP |
| 05:59.49 | X-Rob | e-Hernick - Nope. No advantage at all. |
| 06:00.03 | wafro | hey .. does anyone know if a PAP2 2.0.10(LSc) can be unlocked? |
| 06:00.10 | wafro | or do i need 2.0.9 |
| 06:00.16 | Qwell | wafro: Your provider can unlock it, for a fee |
| 06:00.23 | wafro | i don't have a provider |
| 06:00.39 | Qwell | then why buy a pap2? |
| 06:00.41 | wafro | it's provisioned to vonage .. but they won't do it at all |
| 06:00.44 | Qwell | just get a pap2-na |
| 06:00.49 | wafro | you can't get -na's |
| 06:00.55 | Qwell | sure you can |
| 06:01.13 | wafro | if your a service provider :) |
| 06:01.17 | Qwell | nah |
| 06:01.27 | e-Hernick | Oh, one more problem. Sometimes, especially when using my cell phone to call asterisk, it tends to detect a single keypress as two distinct repetitions of the DTMF tone, thus messing up everything. |
| 06:01.34 | wasim | shaZwaz: IAX anyday |
| 06:01.38 | e-Hernick | Can I tweak DTMF detection somehow ? |
| 06:01.41 | shaZwaz | right |
| 06:01.44 | wafro | well i have a PAP2 .. and i know it's unlockable :) |
| 06:01.55 | wafro | i bought the damn thing .. i should be able to use it |
| 06:02.11 | Qwell | get vonage to unlock it... |
| 06:02.16 | e-Hernick | wafro, you have sold your soul to vonage in exchange for a 5$ rebate over the pap2-na |
| 06:02.20 | Qwell | assuming its a vonage pap2 |
| 06:02.29 | e-Hernick | wafro, you have no chance to survive, make your time. |
| 06:02.37 | wafro | i'll never get vonage :P |
| 06:02.46 | Qwell | Then why did you buy a vonage pap2? |
| 06:02.57 | wafro | because it stated "SIP 2.0 compliant" on the box |
| 06:03.07 | wafro | not "Vonage ONLY" |
| 06:03.07 | Qwell | so return it, and buy a pap2-na |
| 06:03.13 | wafro | this is more fun ;) |
| 06:03.25 | Qwell | then...get...vonage...to...unlock...it |
| 06:03.31 | wafro | they won't |
| 06:03.33 | Qwell | we can go around in circles for hours, if you'd like |
| 06:03.33 | *** join/#asterisk argos73 (n=mike@65-85-207-101.client.dsl.net) |
| 06:03.46 | wafro | lol i've gone around in circles with vonage |
| 06:03.55 | Qwell | then return the damn thing |
| 06:03.55 | e-Hernick | wafro, I bet when you go to McDonalds' and see "100% RealBeef" on your burger wrapper, you assume that RealBeef might actually be of animal origin, don't you ? |
| 06:04.12 | wafro | i shelved the box after my previous efforts (disassmbled and decompressed the MIPSX code) |
| 06:04.17 | Qwell | e-Hernick: as long as RealBeef doesn't have a space... ;] |
| 06:04.44 | e-Hernick | Qwell, it's a deliciously deceitful trademark :) |
| 06:04.46 | wafro | but i was looking around and people have made some progress with other firmwares by loading a non encrypted XML |
| 06:04.50 | wasim | Just like how its no longer Kentucky Fried Chicken ... rather KFC |
| 06:05.06 | Qwell | wasim: it is back to Kentu.. |
| 06:05.19 | e-Hernick | Kentucky Fried C. |
| 06:05.22 | Qwell | and yes, we've all heard of animal 57 :p |
| 06:07.16 | e-Hernick | When specifying an extension such as _70N, can I check if 0 <= N < 5 without using an ugly for loop ? For example, I could do 7[0-5] with the Sipura dialplan syntax.. |
| 06:07.30 | e-Hernick | 70[0-5] actually |
| 06:07.59 | Qwell | You can do the same with * |
| 06:08.08 | Qwell | exten => _70[0-5] |
| 06:08.25 | e-Hernick | nice |
| 06:08.34 | e-Hernick | what about [0-3,5,7-9] ? |
| 06:08.41 | Qwell | no commas |
| 06:08.49 | Qwell | [0-357-9], should work |
| 06:08.53 | Qwell | I think? :p |
| 06:08.59 | e-Hernick | I'll try. |
| 06:09.04 | Qwell | let me know |
| 06:09.37 | X-Rob | Hurm. |
| 06:09.45 | X-Rob | I'm hungry, but it's not even 4:30pm |
| 06:10.00 | e-Hernick | It works. |
| 06:10.39 | *** join/#asterisk FreezeS (n=gido_b@82.208.156.94) |
| 06:11.27 | e-Hernick | Anyway. Sleep time. Thanks ! |
| 06:11.33 | Qwell | yep |
| 06:16.53 | *** join/#asterisk razu (n=razu@fw.voicenet.ee) |
| 06:19.52 | *** part/#asterisk BoyGenius (n=ldvoipen@ip68-108-88-208.lv.lv.cox.net) |
| 06:21.16 | shaZwaz | wasim farfone has evolved ....! |
| 06:21.27 | shaZwaz | great leap |
| 06:21.28 | *** part/#asterisk Uberbot (n=Uberbot@69.252.219.76) |
| 06:21.31 | wasim | shaZwaz: has it? |
| 06:21.50 | *** join/#asterisk Romik_ (n=romik_@84.77.131.158) |
| 06:21.59 | wasim | lol ... no, we're farfon.com |
| 06:21.59 | *** join/#asterisk Romik_ (n=romik_@84.77.131.158) |
| 06:22.36 | shaZwaz | when did farfon telcom emerge ? |
| 06:22.44 | wasim | farfone are proteas ... |
| 06:22.52 | wasim | this is the first i've heard of 'em |
| 06:26.14 | *** join/#asterisk MGSsancho (n=user@adsl-67-126-140-240.dsl.irvnca.pacbell.net) |
| 06:26.15 | *** join/#asterisk Romik_ (n=romik_@84.77.131.158) |
| 06:28.37 | shaZwaz | that nearly tricked me |
| 06:30.18 | shaZwaz | wasim magrathea has a weird website |
| 06:31.25 | *** join/#asterisk voipguy (n=voipguy@196.200.26.42) |
| 06:34.22 | *** join/#asterisk Romik_ (n=romik_@84.77.131.158) |
| 06:34.35 | *** join/#asterisk r0d3nt|m (i=r0d3nt@tinfoilhat.net) |
| 06:34.43 | So3kris | Good Morning |
| 06:34.57 | *** join/#asterisk dudes (n=dudes@12-215-34-84.client.mchsi.com) |
| 06:35.37 | *** join/#asterisk Romik_ (n=romik_@84.77.131.158) |
| 06:36.44 | shaZwaz | good day |
| 06:39.55 | wasim | shaZwaz: magrathea-telecommunications.co.uk i think |
| 06:39.55 | wasim | shaZwaz: From: Magrathea Sales <sales@magrathea-telecom.co.uk> |
| 06:49.44 | *** join/#asterisk Mw3 (i=mw3@spool12-14.gatesgroup.hu) |
| 06:50.20 | *** join/#asterisk mjr^^ (n=muhajir_@210.212.195.134) |
| 06:53.31 | shaZwaz | wasim familiar with any voip QA tools ? |
| 06:55.44 | sams | anyone know anything about Broadvox? are they a good voip wholesole provider? |
| 06:56.13 | Qwell | I should start a provider |
| 06:56.22 | Qwell | ourqualitysucksbutourratesarecheap.com |
| 06:56.40 | *** join/#asterisk stkn_ (i=nobody@gentoo/developer/pdpc.active.stkn) |
| 06:58.10 | *** join/#asterisk terracon (n=tc@CPE0050da608e99-CM0012254076d6.cpe.net.cable.rogers.com) |
| 06:58.11 | sams | qwell, so I take it that you dont like broadvox? :) |
| 06:59.45 | *** join/#asterisk oej (n=Olle@212.247.206.4) |
| 07:00.58 | Qwell | that was completely unrelated |
| 07:01.01 | *** join/#asterisk tobiasWolf (n=konversa@195.162.255.10) |
| 07:01.25 | opus_ | qwell |
| 07:01.33 | opus_ | i'm using those providers as 'tier 2' |
| 07:02.10 | opus_ | it all about the multipath and lcr |
| 07:02.17 | sams | I keep seeing the tier # stuff around, what do the different tier numbers represent? |
| 07:03.10 | *** join/#asterisk terracon (n=tc@CPE0050da608e99-CM0012254076d6.cpe.net.cable.rogers.com) |
| 07:03.28 | opus_ | second source, figure of speech |
| 07:05.02 | wasim | shaZwaz: you mean MOS and other junk like that? |
| 07:05.04 | sams | so tier 3 just means your 3rd peer option for calls to be routed through? |
| 07:05.26 | wasim | shaZwaz: VOIP QA tools are basically, latency measurement and throughput, what else? |
| 07:05.26 | wasim | shaZwaz: jitter too |
| 07:05.36 | shaZwaz | MOS ? |
| 07:06.10 | shaZwaz | plus digital voice print type stuff |
| 07:07.29 | *** join/#asterisk terracon (n=tc@CPE0050da608e99-CM0012254076d6.cpe.net.cable.rogers.com) |
| 07:07.57 | *** join/#asterisk blitzrage (n=blitzrag@asterisk/documenteur-extraordinaire/blitzrage) |
| 07:14.54 | *** join/#asterisk apardo (n=apardo@23.Red-83-44-179.pooles.rima-tde.net) |
| 07:18.41 | smcmahon | I smell some kinda pork product in this room |
| 07:18.57 | *** join/#asterisk terracon (n=tc@CPE0050da608e99-CM0012254076d6.cpe.net.cable.rogers.com) |
| 07:23.08 | wasim | smcmahon: not from here, bloody customs confiscated the sausages someone sent me |
| 07:25.14 | *** join/#asterisk \PsyKo\ (n=xxxxxxxx@golia.caltanet.it) |
| 07:26.17 | smcmahon | LOL thats funny |
| 07:30.29 | *** join/#asterisk vlrk (n=vlrk@59.93.74.34) |
| 07:31.12 | vlrk | <PROTECTED> |
| 07:31.30 | vlrk | the sendmail is working properly when i test it independently |
| 07:31.48 | vlrk | but through asterisk it doesnot send any mail |
| 07:33.22 | smcmahon | Maybe it's denying relay of the messages? |
| 07:33.45 | sep | vlrk, what does maillog say ? |
| 07:35.53 | shaZwaz | wasim back to worldcall, last time I heard they were struggling with * |
| 07:36.04 | wasim | shaZwaz: who isn't? |
| 07:36.18 | shaZwaz | :) |
| 07:36.23 | shaZwaz | me me me |
| 07:37.00 | wasim | shaZwaz: when was the last time you tried to push 240 g729 channels on a single box? |
| 07:37.13 | wasim | shaZwaz: when was the last time you integrated ss7 on * with a siemens switch? |
| 07:37.17 | shaZwaz | ahww |
| 07:37.41 | wasim | shaZwaz: when was the last time you deployed an * based mgcp media gateway to work with proprietary hacks from siemens |
| 07:38.07 | shaZwaz | eew |
| 07:38.15 | wasim | exactly ... :) |
| 07:39.12 | shaZwaz | 240 is a decent number |
| 07:39.33 | wasim | we're upto 200 almost ... working on the final 40 ... |
| 07:39.41 | wasim | but facing severe cpu limitations |
| 07:39.53 | shaZwaz | which machine ? |
| 07:40.09 | wasim | this is a dual opteron 248 |
| 07:40.15 | wasim | but i think we'll need 252s |
| 07:40.48 | wasim | poor worldcall, they have such screwed up stuff that its a wonder stuff works at all :( |
| 07:40.50 | shaZwaz | interting |
| 07:42.24 | wasim | now, imagine the ss7 was the easiest to do ... |
| 07:42.47 | wasim | :( |
| 07:43.07 | shaZwaz | yo |
| 07:43.11 | shaZwaz | keep going |
| 07:43.52 | shaZwaz | the youth looks forward to you ... |
| 07:43.55 | shaZwaz | :) |
| 07:44.53 | *** join/#asterisk outsidefactor (n=blah@203-217-71-90.dyn.iinet.net.au) |
| 07:44.55 | shaZwaz | back in Islu ? |
| 07:45.19 | wasim | nah, i'm a lahori now |
| 07:45.48 | shaZwaz | yup plenty of water here :) |
| 07:46.37 | *** join/#asterisk nagl (n=nagl@rih.zid-nw.wu-wien.ac.at) |
| 07:47.16 | shaZwaz | wasim what you meant by developing * based mgcp |
| 07:47.42 | wasim | * has mgcp controller, not gateway |
| 07:47.53 | shaZwaz | yeah the gateway |
| 07:47.57 | wasim | we're working very hard on making mgcp mgw for * |
| 07:48.21 | shaZwaz | you speak for a team ? |
| 07:48.27 | wasim | i speak for a team |
| 07:48.38 | wasim | the team although doesn't speak to me too often |
| 07:49.09 | shaZwaz | heehee |
| 07:49.57 | *** join/#asterisk apardo (n=apardo@23.Red-83-44-179.pooles.rima-tde.net) |
| 07:51.33 | *** join/#asterisk oej (n=Olle@212.247.206.4) |
| 07:51.44 | shaZwaz | is a home based one ? |
| 07:52.20 | shaZwaz | or a co based setup ? |
| 07:52.50 | wasim | mgcp? its a global effort |
| 07:54.15 | shaZwaz | ah |
| 07:54.45 | shaZwaz | why do I forget |
| 07:55.12 | shaZwaz | yeah right now I know the tea, |
| 07:55.13 | shaZwaz | team |
| 07:55.38 | wasim | oh, good, please tell them to be nice to me ... |
| 07:58.47 | shaZwaz | wasim have you seen the Ad about pcb looking for pace attack ? |
| 07:58.59 | shaZwaz | new pace attack |
| 07:59.21 | wasim | shaZwaz: no, but i always wanted to develop some tools for the pcb |
| 07:59.38 | shaZwaz | like .. |
| 08:01.13 | wasim | dunno, various tools ... one was a PDA+GSM based score, so that all local matches could get live scores out |
| 08:01.34 | wasim | some training tools, tracking, primarily analysis tools |
| 08:01.34 | shaZwaz | thats nice |
| 08:02.00 | wasim | so you could run a ticker tape with domestic cricket scores |
| 08:02.22 | shaZwaz | seems like you got your degrees from some UET ? |
| 08:02.45 | wasim | no, got some from a hot frying pan once ... |
| 08:05.58 | shaZwaz | wasim is there some option for recording IP calls ? |
| 08:12.28 | wasim | shaZwaz: you mean other than monitor? |
| 08:13.13 | shaZwaz | yes coz it didn't work |
| 08:13.24 | wasim | eh? why not ... |
| 08:13.39 | *** join/#asterisk mick3 (n=rebel@mick.is.a.rebel.net.nz) |
| 08:13.57 | shaZwaz | dunno I am still running 1.0.4 may be a bug |
| 08:14.35 | shaZwaz | the soxmix cmd either produce output with monitor |
| 08:15.49 | mjr^^ | hi all |
| 08:16.24 | X-Rob | shaZwaz - just upgrade to 1.0.9 |
| 08:16.42 | mjr^^ | any one to guide me thru configuration of x-pro |
| 08:16.52 | shaZwaz | yup must do that |
| 08:17.37 | *** join/#asterisk pa (n=Paolo@unaffiliated/pa) |
| 08:20.10 | shaZwaz | mjr^^: voip-info.org is your friend |
| 08:20.40 | mjr^^ | i get error as |
| 08:20.42 | mjr^^ | Sep 16 13:43:08 NOTICE[13045]: chan_sip.c:7733 handle_request: Registration from 'muja <sip:vikram@7097093260>' failed for '210.212.195.134' |
| 08:20.48 | mjr^^ | frm my asterisk |
| 08:21.14 | shaZwaz | behind NAT ? |
| 08:22.07 | mjr^^ | yes |
| 08:22.44 | shaZwaz | you better checkout the NAT page at voip-info.org |
| 08:22.56 | mjr^^ | thanx dude |
| 08:28.02 | *** join/#asterisk newbien (n=e@217.245.33.65.cfl.res.rr.com) |
| 08:31.24 | johnm | Can anyone tell me what it is I need to do to generate the ring-tone on Dial. In this instance the network provider wont generate it (since it doesn't actually happen that way). it's SIP->ZAP/PBX |
| 08:37.52 | sigterm | anyone have a polycom 301? i was trying to configure it by the web interface , it rebooted and now the web interface isnt working, but the phones online, receiving pings |
| 08:38.31 | *** join/#asterisk [Airwolf] (n=airwolf@attilla.nl) |
| 08:38.35 | sigterm | just curious where on the phone i can check to enable/disable the web interface if there is such a setting |
| 08:42.26 | *** join/#asterisk smcmahon (n=admin@digitaldatabits.net) |
| 08:43.18 | smcmahon | Woo Hoo |
| 08:48.14 | wasim | sigterm: nmap it |
| 08:49.06 | sigterm | k |
| 08:49.48 | sigterm | only 42 is open |
| 08:50.24 | *** part/#asterisk newbien (n=e@217.245.33.65.cfl.res.rr.com) |
| 08:52.47 | *** join/#asterisk lexande (n=lexande@cpe-72-129-125-12.socal.res.rr.com) |
| 08:56.58 | *** join/#asterisk JooZoo (n=chatzill@kultapossu.yok.utu.fi) |
| 09:00.56 | *** join/#asterisk razu (n=razu@fw.voicenet.ee) |
| 09:02.16 | *** join/#asterisk Laerte (n=io@217.221.36.10) |
| 09:02.20 | Laerte | hy people |
| 09:02.38 | So3kris | hello |
| 09:03.38 | *** join/#asterisk RoyK (n=roy@80.239.107.69) |
| 09:04.16 | RoyK | helo |
| 09:10.17 | *** join/#asterisk buzzyd (n=buzzyd@82-35-251-70.cable.ubr01.enfi.blueyonder.co.uk) |
| 09:10.38 | buzzyd | Does anyone have experience with Sipura 3000 units in the UK? |
| 09:11.40 | buzzyd | I can't seem to get my sipura to use port 5060 when connecting to my asterisk box is their anyway I can force this on asterisk? |
| 09:11.52 | So3kris | Got you some problems ? I want to buy a sipura 2000 |
| 09:11.53 | *** join/#asterisk lexande (n=lexande@cpe-72-129-125-12.socal.res.rr.com) |
| 09:14.08 | lexande | i've set up an Asterisk@home server to use FWD according to the instructions at http://www.aussievoip.com.au/tiki-index.php?page=1.10.007-FWD , but when i try to call an FWD number to test i get "all circuits are busy now" |
| 09:14.20 | lexande | what might be wrong? |
| 09:18.35 | *** join/#asterisk puzzled (n=patrick@puzzled.xs4all.nl) |
| 09:18.45 | puzzled | morning |
| 09:19.18 | lexande | morning |
| 09:20.49 | lexande | since nobody here is answering, where should i ask? |
| 09:21.22 | puzzled | the mailing list or wait about 4 hours till the ppl in the US are awake |
| 09:23.03 | lexande | well, since you're here, i'll ask you. i've set up an Asterisk@home server to use FWD according to the instructions at http://www.aussievoip.com.au/tiki-index.php?page=1.10.007-FWD , but when i try to call an FWD number to test i get "all circuits are busy now". what might be wrong? |
| 09:23.24 | *** join/#asterisk colombus (n=colombus@193.190.210.151) |
| 09:25.44 | puzzled | lexande: that's a questions for the Asterisk@Home irc channel/mailing list. BEsides that, I have no idea cause I don't know what funky stuff A@H does |
| 09:26.10 | lexande | what is the asterisk@home channel called? |
| 09:26.27 | puzzled | dunno. check the A@H website |
| 09:39.20 | *** join/#asterisk yaboo (n=jsirucka@220-245-131-131.static.tpgi.com.au) |
| 09:39.52 | lexande | there does not seem to be an asterisk@home IRC channel, and therefore this channel is the only ontopic place to ask |
| 09:41.31 | *** join/#asterisk zeitgeist_y2k (n=ceicke@mail.inmedias.it) |
| 09:42.32 | zeitgeist_y2k | question about callfiles... if a call is currently active on a given channel and a callfile now says, that a call should happen on that channel, what happens? |
| 09:43.14 | puzzled | lexande: A@H is only based on asterisk. A@H questions on the Asterisk mailing list are often ignored for not belonging there. You should really talk to the A@H people. they do have forums |
| 09:43.45 | puzzled | zeitgeist_y2k: you could easily try that. but I guess a busy |
| 09:52.53 | *** join/#asterisk dwmw2_gone (i=ctrlprox@baythorne.infradead.org) |
| 09:58.12 | *** join/#asterisk Gunnar (n=gunnar@bkkb-gw.bitcon.no) |
| 10:13.37 | *** join/#asterisk Tmirage (n=mirage@cust.12.229.adsl.cistron.nl) |
| 10:23.11 | many | is there any comprehensable documentation zu extconfig.conf? |
| 10:23.38 | many | (voip-info seems to stay at some very basic examples) |
| 10:42.15 | *** join/#asterisk mover (n=dlu@gw-dus-net.dus.de.ncore.net) |
| 10:42.39 | mover | hi @all |
| 10:43.03 | mover | anyone get cvs head from today? |
| 10:43.32 | mover | cant compile addons especially res_mysql_config.so |
| 10:43.59 | *** join/#asterisk pa (n=Paolo@unaffiliated/pa) |
| 10:45.32 | So3kris | Is it hard to connect 2 Asterisk server to eachother. the manual on voip.org was not complete clear to me. |
| 10:46.14 | FreezeS | it's very easy So3kris |
| 10:46.16 | FreezeS | use IAX |
| 10:46.43 | So3kris | that have i tryed toe configed |
| 10:46.49 | *** part/#asterisk pa (n=Paolo@unaffiliated/pa) |
| 10:48.21 | So3kris | FreezeS: have i read it good. that you must make a cross connection. A->B and B->A |
| 10:48.50 | FreezeS | it took me 5 minutes to set it up, after reading the manual... |
| 10:48.59 | FreezeS | what isn't working for you ? |
| 10:49.16 | So3kris | the wil nog register |
| 10:49.29 | So3kris | but i have seen one with trunk and a other with a user config |
| 10:50.10 | So3kris | FreezeS: do you use the trunk config ? |
| 10:50.27 | FreezeS | So3kris, how are the boxes physically linked ? |
| 10:50.47 | So3kris | the are in the same network |
| 10:51.35 | mover | plz helm me out, what is going wrong with addons: res_config_mysql.c:428: error: storage size of `mysql_engine' isn't known |
| 10:51.45 | FreezeS | don't you use iax.conf ? |
| 10:52.06 | So3kris | iax.conf and exten...conf |
| 10:52.36 | FreezeS | well, you set something like this: |
| 10:52.41 | FreezeS | [first] |
| 10:52.46 | *** join/#asterisk szer (n=szer@217.116.36.22) |
| 10:52.48 | FreezeS | type=friend |
| 10:52.51 | FreezeS | user=first |
| 10:52.57 | szer | hi |
| 10:53.03 | FreezeS | secret=pass |
| 10:53.10 | FreezeS | host=xx.xx.xx.xx |
| 10:53.19 | FreezeS | context=whatever |
| 10:54.06 | So3kris | no trunk=yes ? |
| 10:54.18 | FreezeS | no |
| 10:54.26 | FreezeS | and on [general] you do: |
| 10:54.52 | *** join/#asterisk dercol (n=ercolani@sei.yacme.com) |
| 10:55.01 | kaldemar | ~pastebin |
| 10:55.02 | jbot | pastebin is probably a place to paste your stuff without flooding the channel - try http://pastebin.ca/ |
| 10:55.09 | kaldemar | ;) |
| 10:55.58 | szer | is there anybody who is familiar with muxmon? |
| 10:56.51 | *** join/#asterisk nsar (i=nsar@athe530-h107.otenet.gr) |
| 10:57.06 | nsar | asterisk can compile and work succesfully on solaris? |
| 10:57.59 | FreezeS | So3kris: register => first:pass@XX.XX.XX.XX, where XX.XX.XX.XX is the second box's IP |
| 10:58.22 | So3kris | Ok FreezeS thanx you very mutch |
| 10:58.46 | FreezeS | and on the second, you don't put the register line |
| 11:02.56 | *** join/#asterisk nextime (n=nextime@213-140-6-96.ip.fastwebnet.it) |
| 11:05.15 | *** join/#asterisk szer (n=frodo@217.116.36.22) |
| 11:06.08 | *** part/#asterisk lexande (n=lexande@cpe-72-129-125-12.socal.res.rr.com) |
| 11:06.49 | *** join/#asterisk szer (n=frodo@217.116.36.22) |
| 11:07.18 | szer | HELP |
| 11:07.35 | szer | hi |
| 11:09.53 | *** join/#asterisk szer (n=szer@217.116.36.22) |
| 11:10.18 | zobia | hello. i record one wav file under windows. but when i put it in /var/asterisk/sounds , it prompt format_wav.c:156 check_header: Unexpected freqency 22050 |
| 11:10.29 | zobia | please help me out |
| 11:10.51 | zobia | which tools i need to make wav files? |
| 11:11.09 | FreezeS | zobia: use 8000 sampling frequency |
| 11:11.56 | zobia | thanx for answer FreezeS,how can i make 8000 sampling frequency? |
| 11:12.11 | FreezeS | what tool are using to record ? |
| 11:12.50 | zobia | windows sound recorder |
| 11:13.15 | FreezeS | use audacity |
| 11:13.21 | FreezeS | it's free |
| 11:13.33 | zobia | okay, thanx.i will try |
| 11:13.40 | FreezeS | np |
| 11:17.15 | szer | what's the difference between chanspy and muxmon? |
| 11:21.27 | shaZwaz | zobia to be exact use 8000 Sampling rate and 16 bit mono |
| 11:24.03 | *** join/#asterisk CleanerX (n=nix@nat-ph3-wh.rz.uni-karlsruhe.de) |
| 11:33.32 | *** join/#asterisk zotz (n=zotz@24.231.36.100) |
| 11:35.18 | zobia | thanx shaZwaz |
| 11:46.57 | *** join/#asterisk zoo (i=nobody@ip-113-16.travedsl.de) |
| 11:50.48 | *** join/#asterisk Pazzo (n=Pazzo@host130-250.pool8172.interbusiness.it) |
| 12:01.21 | sivana | tzanger: ping |
| 12:02.05 | Druken | pong :) |
| 12:02.54 | sivana | :) |
| 12:03.40 | Druken | sivana: ya know... i really love how telco return their calls.... (neither gt or allstream has called yet) |
| 12:04.24 | sivana | that's ok... GT is owned my Sprint and I was talking to them yesterday |
| 12:04.40 | sivana | they're taking my partner and I to a Leaf/Sens game... lol |
| 12:04.43 | Druken | yeah, i told ya rogers purchased GT |
| 12:05.38 | Druken | in toronto or ottawa? |
| 12:05.39 | Druken | hehe |
| 12:05.43 | sivana | Ottawa |
| 12:06.13 | sivana | that's where my rep is |
| 12:06.29 | Druken | cool :) |
| 12:07.18 | Druken | did you find out about a cost factor? |
| 12:07.20 | sivana | of what? |
| 12:07.23 | sivana | oh |
| 12:07.39 | sivana | can you email me your office location/info/phone so I can get a quote? |
| 12:08.05 | sivana | I forgot.. that's why he called in the first place :) |
| 12:08.16 | Druken | hehehe |
| 12:09.02 | *** join/#asterisk pa (n=Paolo@unaffiliated/pa) |
| 12:10.20 | *** join/#asterisk darkskiez (n=darkskie@194.247.78.146) |
| 12:11.25 | zobia | hello. how can i print something from agi to the asterisk console when i invoke this agi? |
| 12:13.18 | zobia | i wrote that agi in perl. if i use perl *.agi then it's working. when i invoke in the dialplan it seems did not run this agi. |
| 12:13.22 | sivana | zobia: does NoOP work? |
| 12:15.48 | zobia | oh, i did not use NoOP before |
| 12:16.01 | sivana | NoOp(blah) |
| 12:16.11 | *** join/#asterisk szer (n=szer@217.116.36.22) |
| 12:16.28 | *** join/#asterisk szer (n=szer@217.116.36.22) |
| 12:16.40 | zobia | thanx sivana. i will check about NoOp then ask u again okay? |
| 12:16.54 | sivana | sure |
| 12:18.15 | FreezeS | sivana, zobia, are you girls ? |
| 12:18.21 | sivana | umm.. no |
| 12:18.22 | zobia | hello sivana i check NoOp. it's for printf the var which set in the dialplan. what i want to print is the variable inside the agi program. |
| 12:18.35 | zobia | yes. i am girl . anything wrong? |
| 12:18.41 | FreezeS | no, just curious |
| 12:18.52 | FreezeS | you both have girl nicknames :) |
| 12:19.04 | sivana | funny.. you too |
| 12:19.09 | szer | what's the difference between the muxmon and chanspy? |
| 12:19.13 | sivana | NoOp(${VAR}) ? |
| 12:19.29 | *** join/#asterisk newl (n=newlook@203-59-18-208.dyn.iinet.net.au) |
| 12:19.34 | sivana | I guess I know nothing about AGI.. hehe |
| 12:19.56 | zobia | oh. like i printf something from agi, but where i can see the output? |
| 12:20.21 | sivana | yes, I hear what you're saying, but I have no idea how to get it to show up in the CLI |
| 12:21.04 | zobia | ok, no problem. maybe other person knows. it's no need to show CLI, just anywhere i can see the output is ok. |
| 12:21.27 | sivana | you could write to a text file? |
| 12:22.18 | szer | hmm, i think i'm invisible |
| 12:22.22 | zobia | yes. it's good idea. |
| 12:28.33 | zobia | as i search on the web , it said use print STDERR could work. but my one can not. |
| 12:30.40 | zobia | and when i use the latest cvs asterisk. if i use 'stop now' or 'restart' it 's not working. anybody use the latest one? |
| 12:34.26 | *** join/#asterisk bjohnson (n=bjohnson@jecinc.tor.istop.com) |
| 12:39.27 | *** join/#asterisk MikeJ[Laptop] (n=ircatjer@mi.origenfinancial.com) |
| 12:44.35 | tzanger | sivana: here |
| 12:45.39 | *** join/#asterisk cjk (n=cjk@80.92.64.103) |
| 12:46.53 | DrukenWrk | szer: not invisible we just don't know the answer.... is that alright? |
| 12:50.08 | szer | yep |
| 12:52.52 | *** join/#asterisk rob314 (n=rob314@207.58.194.2) |
| 12:58.36 | Katty | mew. |
| 12:58.42 | mutilator | mornin all |
| 12:59.20 | mutilator | ya know i took the ,t out of my Dial command, and wouldn't ya know it everyone behind a firewall/nat is having issues with their audio |
| 12:59.50 | *** join/#asterisk Ariel_ (n=Ariel@adsl-068-157-125-248.sip.mia.bellsouth.net) |
| 12:59.55 | Katty | Ariel_: :> |
| 13:00.08 | Ariel_ | good morning |
| 13:00.10 | Ariel_ | Katty, how are you? |
| 13:00.25 | Katty | Ariel_: soon to be hyper after this sugary donut and oj. |
| 13:00.33 | *** join/#asterisk florin_m (n=florin@212.240.100.196) |
| 13:00.35 | florin_m | hi |
| 13:00.42 | florin_m | anyone with PRI UK experience ? |
| 13:00.45 | Ariel_ | well that is good in a way. |
| 13:00.47 | florin_m | seems i have a problem |
| 13:00.53 | Katty | florin_m: probably. you should just ask your question. |
| 13:01.16 | Katty | Ariel_: good in the way that i'm a little tired. bad in the way i'll be bouncy and not be able to concentrate :P |
| 13:01.17 | florin_m | on asterisk i receive ONLY 6 digits as dID |
| 13:01.23 | *** join/#asterisk gambolputty (n=gambolpu@72.240.241.108) |
| 13:01.29 | florin_m | but if i connect my pbx |
| 13:01.35 | florin_m | i receive all of them :( |
| 13:01.55 | florin_m | so how to fix it? |
| 13:02.34 | Ariel_ | florin_m, which 6 digits last ones or the beginning? |
| 13:02.53 | *** join/#asterisk Phantom-X (n=there@c-edefe055.630-1-64736c13.cust.bredbandsbolaget.se) |
| 13:02.55 | florin_m | last ones |
| 13:02.57 | Phantom-X | hello there |
| 13:03.08 | florin_m | i receive only last 6 digits |
| 13:04.32 | Ariel_ | do you have: in the zapata.conf switchtype= euroisdn |
| 13:04.37 | florin_m | yep |
| 13:05.12 | florin_m | signalling=pri_cpe |
| 13:05.12 | florin_m | switchtype=euroisdn |
| 13:05.42 | Ariel_ | prilocaldialplan=national |
| 13:05.57 | Phantom-X | does asterisk really ned any hardware if I wanna run SIP ? |
| 13:06.07 | Ariel_ | Phantom-X, no |
| 13:06.11 | Phantom-X | cool |
| 13:06.26 | *** join/#asterisk Nir_S (n=Nir@84.94.135.83.cable.012.net.il) |
| 13:06.38 | Phantom-X | so making a "answering machine if I am not at home will be doable without any special hardware then I hope |
| 13:06.39 | *** join/#asterisk pablix (n=root@lacnic.net.uy) |
| 13:06.41 | pablix | hio all |
| 13:07.01 | Ariel_ | florin_m, cidsignalling=v23 |
| 13:07.07 | pablix | what is the sintax in the extension.conf to incomming calls from my pbx? my pbx have the dialplan 1xx |
| 13:07.23 | florin_m | same |
| 13:07.25 | Ariel_ | Phantom-X, well yes |
| 13:08.29 | florin_m | let me try :P |
| 13:09.28 | pablix | somebody help me? pleasssseeeeee? |
| 13:10.04 | Katty | pablix: sometimes you have to be patient until someone drops by that has an answer to your question. saying pleeeeeeeeeaaaaaaaaaassssssseomglolz!!!11 is NOT going to help you. |
| 13:10.13 | Katty | pablix: if anything, that's just going to annoy people. |
| 13:10.59 | Ariel_ | pablix, what do you want to do? your question is actually incomplete? |
| 13:11.10 | *** join/#asterisk newbien (n=e@217.245.33.65.cfl.res.rr.com) |
| 13:11.11 | pablix | katty; ok you have reason. sorry |
| 13:11.23 | Ariel_ | an dial plan is exten => 1XX.,Dial(Blah) |
| 13:12.08 | pablix | ariel. i have asterisk installed and i didnt receive incomming calls from pbx... i need the sintax in exstension.conf to receive incomming calls. |
| 13:12.34 | Ariel_ | pablix, to go where? |
| 13:12.38 | Ariel_ | via what device? |
| 13:12.43 | FreezeS | pablix, how do you connect asterisk to the telephone line ? |
| 13:12.49 | Ariel_ | which context or media is the pbx sending you the call? |
| 13:13.17 | pablix | i connect the box to pbx from e1 (te110p) |
| 13:14.23 | *** join/#asterisk lehel (n=asd@82.79.20.17) |
| 13:14.25 | lehel | hello |
| 13:14.46 | Ariel_ | pablix, in the context in the zapata.conf for the E1 you you need like context=incoming In that context you then need to route the call via either numbers sent to you. like exten => 1NXX.,dial(or what you want) |
| 13:15.02 | Nir_S | hey all |
| 13:15.09 | Nir_S | how is everybody been doing ? |
| 13:15.15 | *** join/#asterisk jief- (n=jief@modemcable163.182-80-70.mc.videotron.ca) |
| 13:15.19 | Nir_S | I've got a funky AGI question to askl |
| 13:15.20 | Nir_S | ask\ |
| 13:15.22 | Nir_S | ask |
| 13:15.29 | FreezeS | pablix, you REALLY should read the docs... |
| 13:15.30 | *** part/#asterisk newbien (n=e@217.245.33.65.cfl.res.rr.com) |
| 13:15.31 | jief- | hello, im looking for a h.323 softphone (preferably free and available for Linux) |
| 13:15.45 | *** join/#asterisk h4mm3r` (n=h4mm3r@85-18-14-10.fastres.net) |
| 13:15.48 | Nir_S | juif, you believe you can try sjphone from sjlabs |
| 13:15.51 | Nir_S | www.sjlabs.com |
| 13:15.58 | Nir_S | jief that is |
| 13:16.26 | zeitgeist_y2k | jief-, gnomemeeting |
| 13:16.41 | pablix | Ariel_ in the zapata ??? or in the extension? |
| 13:17.09 | *** join/#asterisk mjr^^ (i=qWer__@210.212.195.130) |
| 13:17.11 | jief- | zeitgeist_y2k: ill keep that one in mind, but i use KDE, and having to install lots of GTK deps, doesnt feel good hehe |
| 13:17.15 | *** join/#asterisk RickTick (n=rpulido_@c-67-191-89-108.hsd1.fl.comcast.net) |
| 13:17.19 | florin_m | now i can;t dial at all out :P |
| 13:18.47 | Ariel_ | pablix, both |
| 13:19.11 | Ariel_ | the context= goes in the zapata.conf and the exten = is for the extensions.conf |
| 13:20.02 | Nir_S | question: lets say I have an Asterisk running an AGI script. That script then originates a call to an outbound number and into a specific context, how can I pass the variables that were set in the first context, eg CALLERIDNUM and such into the new context ? |
| 13:20.35 | pablix | Ariel; i have a context=default in the zapata and now in the extension i need to add this line in the context default no? |
| 13:22.38 | zobia | hi, everybody. i still can not debug my agi. either print to console or write to any log file. please see if my agi like this it can print something on the console? |
| 13:22.52 | zobia | http://pastebin.ca/23087 |
| 13:23.20 | mistral | are there any docs anywhere about getting a Intel Winmodem to work ? |
| 13:23.42 | Ariel_ | pablix, if you want to do that then yes. But I would never have anything of use in my default context. |
| 13:24.09 | pablix | ok ariel but is just for testin. and move when i put asterisk in production |
| 13:24.15 | pablix | i receive this message now |
| 13:24.16 | pablix | Extension '' in context 'default' from '109' does not exist. Rejecting call on channel 0/31, span 1 |
| 13:24.19 | Ariel_ | florin_m, have you called digium for your free te110p setup support? |
| 13:24.23 | zobia | :( . nobody answer my question? |
| 13:24.50 | Katty | zobia: remember, patience is the key. |
| 13:25.04 | Ariel_ | pablix, ok it's telling you don't have an extension 109. So now what is your dial plan that you have? |
| 13:25.05 | Katty | zobia: you're not the only one in the channel with problems. |
| 13:25.24 | darkskiez | florin: who is your provider |
| 13:25.32 | pablix | no., because the ext. 109 is a pbx extension. i need to add in asterisk dialplan too? |
| 13:25.36 | darkskiez | i've a te110p in the UK hooked up to a BT reseller |
| 13:25.38 | zobia | yes. i know. i am full of patient . good luck everybody |
| 13:26.29 | zobia | i think for expert it's not a hard question. but maybe they are sleeping now. |
| 13:26.42 | rob314 | zobia: i have always had good luck with using debug("blah blah blah"); |
| 13:26.48 | rob314 | instead of verbose |
| 13:27.13 | rob314 | i had the same trouble when first playing with AGI |
| 13:27.31 | florin_m | <darkskiez> BT |
| 13:27.36 | florin_m | <darkskiez> BT -uk |
| 13:27.43 | zobia | oh use debug inside perl file? |
| 13:27.55 | florin_m | <darkskiez> u get all digits from did ? |
| 13:27.56 | darkskiez | florin_m: what asterisk version? |
| 13:27.57 | Nir_S | any AGI wizards around ? |
| 13:28.07 | florin_m | <darkskiez> i get only last 6 :( |
| 13:28.07 | Ariel_ | pablix, but you have not givin us any real info other then you have a pbx and want to dial. dial to where from where? or to what? |
| 13:28.07 | darkskiez | florin_m: yes. |
| 13:28.18 | florin_m | asterisk head version |
| 13:28.29 | florin_m | what version u using? |
| 13:28.30 | rob314 | zobia: if you use "debug()" inside the AGI it will just print directly to the asterisk console |
| 13:28.37 | darkskiez | head from end of june |
| 13:28.48 | zobia | wow. i am trying now. thanx rob314 |
| 13:28.50 | florin_m | <darkskiez> can u pastebin ur zaptel.conf and ur zapata.conf ? |
| 13:29.00 | rob314 | zobia: i assume that is what you are trying to do? |
| 13:29.05 | pablix | ariel_ i need to dial in my pbx with dial plan 1XX to my asterisk dial plan 2XX is that possible? what i need? |
| 13:29.19 | *** join/#asterisk cio (n=na@adsl-068-209-198-242.sip.bhm.bellsouth.net) |
| 13:29.23 | darkskiez | florin_m: not at the moment |
| 13:29.25 | florin_m | <darkskiez> i get full callerid, but i don't get full did (the number he dialed) |
| 13:29.31 | zobia | ok. i am trying debug() |
| 13:29.34 | darkskiez | OH |
| 13:29.37 | darkskiez | that |
| 13:29.41 | darkskiez | thats normal for BT |
| 13:29.43 | darkskiez | thats how it works |
| 13:29.49 | florin_m | <darkskiez> only 6 ? |
| 13:29.58 | florin_m | but on my pbx i get all ! |
| 13:30.05 | florin_m | so can't be from bt! |
| 13:30.06 | darkskiez | the pbx is configured to add the rest |
| 13:30.16 | florin_m | aaa ;) |
| 13:30.19 | florin_m | k then ;) |
| 13:30.19 | rob314 | zobia: good luck with it... if you need some examples I can certainly forward some over |
| 13:30.28 | florin_m | <darkskiez> thanks . false alarm then ;) |
| 13:30.35 | zobia | bad luck , still no output |
| 13:30.52 | zobia | yes. please forward some example to me. thanx a lot |
| 13:30.59 | zobia | i only got AGI Script create_voicemail.agi completed, returning 0 |
| 13:31.09 | zobia | nothing else |
| 13:31.14 | darkskiez | florin_m: setting your outgoing DID is the same, you need to set it to 6 digits. |
| 13:31.16 | cio | Hi all. I have an asterisk system that sits on a private network with a natted Internet connection. I have a couple remote phones. I can dial in to the * box and then hit an extension and talk to the people at those remote extensions but if I pick up a SIP phone I can call those extensions, but no audio goes back and forth. An RTP thing I guess. Any suggestions? |
| 13:31.24 | Ariel_ | pablix, we are miss communication. Pbx --- te110p asterisk box. ---- to where? what devices? your dial string depends on that. |
| 13:31.31 | rob314 | zobia: do you have AIM or Yahoo IM? |
| 13:31.38 | florin_m | <darkskiez> i know, i've seen that too ;) and it's working fine ;) |
| 13:31.39 | zobia | yes. |
| 13:31.48 | zobia | let me open my yahoo. |
| 13:32.02 | florin_m | <darkskiez> problem is if a extension dial's out stupid pbx put's a strange called id out ;) |
| 13:32.05 | rob314 | my SN on both is KC8DML... contact me there and we can work on this a little |
| 13:32.24 | zobia | ok. thanx |
| 13:32.44 | pablix | ariel. aaahh ok.. (pbx_) --- (aster te110p) ---- (pcremote xten phone) |
| 13:33.40 | Phantom-X | where can I find the documentation for asterix , I did an emerge asterisk in gentoo right now and it seems to ahve been compiled all ok now I just need to know how to deal with this thing =) |
| 13:33.49 | rob314 | all: since i am fairly new to being in the room here, is it accepted by the community to have someone contact me outside the room, or do you guys prefer i keep the discussion in the room here in case there was someone with the same problem/question? |
| 13:34.08 | Phantom-X | man asterisk didnt give much |
| 13:34.19 | Ariel_ | exten => 109,1,Dial(Sip/xten,20) |
| 13:34.31 | Ariel_ | ~docs |
| 13:34.35 | jbot | docs is probably Documentation can be found at http://www.digium.com/index.php?menu=documentation or http://www.digium.com/handbook-draft.pdf or http://www.voip-info.org/wiki-Asterisk or http://www.asteriskdocs.org or http://www.oreilly.com/catalog/asterisk |
| 13:34.38 | florin_m | <darkskiez> is ur card keep re-init time to time? |
| 13:34.42 | Phantom-X | thank you |
| 13:34.57 | darkskiez | florin_m: its a setting somewhere. |
| 13:35.41 | florin_m | <darkskiez> why ? so it doesn't stuck or something? |
| 13:36.30 | darkskiez | see resetinterval in zapata.conf |
| 13:36.31 | pablix | ariel_ the same erro. |
| 13:36.33 | pablix | Extension '' in context 'default' from '109' does not exist. Rejecting call on channel 0/31, span 1 |
| 13:37.20 | *** join/#asterisk goatmilk (n=goatmilk@130-127-45-11.chouse.resnet.clemson.edu) |
| 13:38.12 | Ariel_ | pablix put exten => s,1,answer | exten => s,2,Dial(Sip/xten,20) just for a test |
| 13:38.42 | *** join/#asterisk DVKII (n=DIVK@cpc3-belc2-3-0-cust231.belf.cable.ntl.com) |
| 13:39.05 | pablix | ariel; same error :( |
| 13:42.54 | Katty | Sep 16 08:33:39 WARNING[3568]: chan_zap.c:5768 ss_thread: CallerID feed failed: Success <- teehee! |
| 13:43.04 | *** join/#asterisk Shoragan (n=shoragan@d072.apm.etc.tu-bs.de) |
| 13:43.17 | tzanger | Katty: :-) nothing like checking errno, doing something that fucks with errno and THEN asking for perror to describe it :- |
| 13:43.20 | tzanger | er :-) |
| 13:43.24 | *** join/#asterisk brad_mssw (n=brad@shop.monetra.com) |
| 13:43.39 | cio | Anyone? |
| 13:43.40 | cio | Hi all. I have an asterisk system that sits on a private network with a natted Internet connection. I have a couple remote phones. I can dial in to the * box and then hit an extension and talk to the people at those remote extensions but if I pick up a SIP phone I can call those extensions, but no audio goes back and forth. An RTP thing I guess. Any suggestions? |
| 13:44.16 | tzanger | cio: talk to bkw_ he says that SIP + NAT is trivial |
| 13:44.24 | Katty | tzanger: errno is just silly. |
| 13:44.41 | cio | Ok, thanks. What do you mean by trivial? |
| 13:45.16 | tzanger | cio: he claims it's stupidly simple to set up and make work, so I'm pointing everyone with trouble on that to him :-) |
| 13:45.29 | cio | tzanger: thanks. |
| 13:46.44 | Juggie | tzanger, once you understand how the traffic flows |
| 13:46.47 | Juggie | its simple |
| 13:46.58 | *** join/#asterisk viLeR (i=1000@ip-47-252.telesat.com.co) |
| 13:47.14 | cio | Juggie - help a brother out then. I'm pretty sure I got it, but my question is once RTP kicks in, is it phone-to-phone or phont-to-*-to-phone? |
| 13:47.42 | Juggie | cio, so you have remote phones in a natted network, connecting to a * server, which is also inside a natted network correct? |
| 13:47.44 | Juggie | so double nat? |
| 13:47.54 | cio | Yep. |
| 13:47.57 | Juggie | ok. |
| 13:48.01 | cio | No, single nat on both sides. |
| 13:48.09 | Juggie | thats what i mean |
| 13:48.13 | Juggie | anywho |
| 13:48.16 | cio | k, cool. please continue .. :) |
| 13:48.27 | Juggie | on your firewall external to your * box |
| 13:48.41 | Juggie | i assume you have forwarded the sip udp port |
| 13:48.43 | Juggie | into the * box |
| 13:48.45 | Juggie | correct? |
| 13:48.45 | cio | Yep. |
| 13:48.51 | Juggie | did you also forward the RTP range? |
| 13:48.54 | cio | An the RTP UDP ports 10k-20k. |
| 13:48.59 | Juggie | as defined in your /etc/asterisk/rtp.conf |
| 13:49.02 | cio | Yep. |
| 13:49.03 | ful|work | rtp proxy |
| 13:49.03 | Juggie | k good |
| 13:49.07 | Juggie | ful, shush |
| 13:49.28 | Juggie | cio, within your /etc/asterisk/sip.conf did you define your internal & external networks? |
| 13:49.39 | Juggie | and your externalip |
| 13:49.47 | cio | Yep. |
| 13:50.09 | tzanger | Juggie: well yes but you need to restrict the ports that * will send RTP through to something sane (say a couple dozen) but you can't always restrict the ports on the other equipment |
| 13:50.22 | tzanger | I really prefer NOT to open up 10k fucking ports just to allow SIP through |
| 13:50.30 | Juggie | tzanger, you dont have to restrict ports |
| 13:50.38 | cio | Yep, both defined. |
| 13:50.40 | tzanger | Juggie: can you explain then, I *am* a SIP newb |
| 13:50.40 | Juggie | you can usually set them up on triggers |
| 13:50.54 | Juggie | eg, device makes a connect to 5060, then open up 10k-20k for that ip |
| 13:51.36 | Juggie | or you could even go as far as to write a script to open up the firewall based on registered devices |
| 13:51.58 | Juggie | cio |
| 13:52.03 | Juggie | when you make a phone call |
| 13:52.28 | Juggie | eg, a remote sip->asterisk call, which scenarios work |
| 13:52.57 | Juggie | eg, can you hear, but not send, no audio at all? etc. |
| 13:52.58 | cio | sip-> asterisk, asterisk-> sip, local sip->sip all work. |
| 13:53.18 | jief- | you shouldnt use ports under 15K, as those are reserved for services |
| 13:53.18 | cio | sip(remote)->sip(remote) calls, rings, mwi, but no voice. |
| 13:53.19 | Juggie | ok, so its solely remote sip-> local sip |
| 13:53.30 | Juggie | k |
| 13:53.56 | Juggie | do you have canreinvite=no for your remote sip phones |
| 13:53.57 | tzanger | Juggie: you mean open up 10-20k for the INTERNAL IP from any extenral IP right? |
| 13:54.16 | cio | Nope. |
| 13:54.18 | Juggie | tzanger, there are more then one way to do it |
| 13:54.24 | cio | They show up in sip show peers with good pings. |
| 13:54.35 | tzanger | Juggie: well you can't open up 10k prots for the one external host because you will quickly run out of ports for other calls |
| 13:54.38 | Juggie | cio, set that, set canreinvite=no for your remote phones. |
| 13:54.40 | cio | I fixed my registration issues by expiring them after a few minutes instead of an hour. |
| 13:54.52 | Juggie | tzanger, i'm not opening up for one host |
| 13:54.54 | cio | Ok. |
| 13:55.28 | Juggie | tzanger, you setup a forwarding rule, which says when a connection is received from such and such an external ip, on range 10k-20k forward to * ip. |
| 13:55.38 | Juggie | cio, also make sure nat is not on for your local phones. |
| 13:55.52 | tzanger | Juggie: ok |
| 13:55.58 | cio | Yea, fixed that early on. |
| 13:55.58 | tzanger | but still why are 10k fucking ports required? |
| 13:56.02 | tzanger | that's what blows me away |
| 13:56.15 | tzanger | dynamic port allocation in this day and age is assinine |
| 13:56.17 | Juggie | tzanger, because unless you have a sip aware firewall, you have no idea which rtp port will be chosen |
| 13:56.26 | Juggie | if any |
| 13:56.40 | Juggie | because in most scenarios, the remote sip phone will use the source port of the rtp to repond |
| 13:56.46 | jief- | if you dont want to open ports, just do like everyone else, use VPN |
| 13:57.17 | Juggie | you could actually probally not even use the 10k-20k range |
| 13:57.24 | Juggie | and still work with alot of phones, if not most by changing settings |
| 13:57.27 | cio | My corporate * solution works great, I'm just trying to put some phones at remote sales peoples homes. |
| 13:57.41 | cio | If it was another branch, I'd probably do IAX switching with another * box. |
| 13:57.45 | Juggie | cio, understood... i'm just making sure you have the settings down |
| 13:57.57 | jief- | cio: use VPN or LAN extension for remote people |
| 13:58.06 | Juggie | not necessairy |
| 13:58.08 | *** join/#asterisk Ivar-Voop (n=chatzill@bkkb-gw.bitcon.no) |
| 13:58.38 | Juggie | cio, did you change those settings? |
| 13:59.08 | cio | Yep.. The only thing I really added was canreinvite=no, everything else was right on the money. |
| 13:59.14 | Juggie | k |
| 13:59.15 | cio | Thanks for the help, btw. |
| 13:59.19 | Juggie | np |
| 13:59.23 | Juggie | did you try to make a call? |
| 13:59.43 | Juggie | be sure to sip reload first. |
| 13:59.48 | cio | I have to track down one of these remotes and get them to go pick up. |
| 14:00.02 | cio | Thanks - I'll let you know how it goes!!!! :) |
| 14:00.11 | Juggie | get a remote phone for testing locally :) |
| 14:00.14 | Juggie | it will save you alot of time |
| 14:00.35 | Juggie | get a 50$ nat router and a phone and plug it into your internet connection :P |
| 14:00.36 | cio | I do at my house, I'm at work now.. If I can't track them down, I'll test at lunch. |
| 14:00.42 | Juggie | thats what i have here. |
| 14:00.43 | Juggie | i ment @ work |
| 14:00.50 | Juggie | you need a test setpu @ the office. |
| 14:01.00 | Juggie | ummm |
| 14:01.02 | Juggie | if it doesnt work |
| 14:01.05 | Juggie | on the console |
| 14:01.11 | Juggie | do rtp debug |
| 14:01.22 | mutilator | anyone heard of using t in your Dial command helping customers behind nat? |
| 14:01.33 | cio | k, will do! |
| 14:01.35 | mutilator | not lose their audio stream |
| 14:01.49 | Katty | heh. my best friend is hosting a Pure Romance party. |
| 14:01.56 | Juggie | you can also do 'sip debug' at the same time |
| 14:02.03 | Juggie | and what ever you gather, save it so i can take a look |
| 14:02.17 | Juggie | oh yah cio |
| 14:02.24 | cio | ? |
| 14:02.29 | Juggie | when you do sip show peers |
| 14:02.32 | Katty | Hmmhesays: guess what. my conservative best friend is hosting a sex toy party. .......did i already tell you this? ROAD TRIP YOURSELF DOWN HERE! kthxbi. |
| 14:02.38 | Juggie | Nat = N and the Host = an external ip correct |
| 14:02.51 | Juggie | for the remotes |
| 14:02.53 | *** join/#asterisk vlrk (n=vlrk@59.93.71.226) |
| 14:03.18 | cio | Yep! |
| 14:03.23 | vlrk | i want to use the asterisk with gdb |
| 14:03.25 | Juggie | cio, also you dont need someone to answer to test it |
| 14:03.33 | vlrk | how far can it be possible |
| 14:03.38 | cio | How do I test RTP without a body? |
| 14:03.56 | Katty | i thought that said RIP without a body. |
| 14:03.58 | Katty | heh |
| 14:04.03 | Juggie | nm |
| 14:04.09 | Juggie | that would only work sip->zap |
| 14:04.16 | cio | Ahh.. |
| 14:04.21 | cio | :) |
| 14:04.24 | Juggie | as it would send rtp before zap answersa |
| 14:05.05 | tzanger | I dunno, a hundred ports open would be more than enough |
| 14:05.17 | cio | heh |
| 14:05.22 | Juggie | tzanger, yes, you can define 10k-11k |
| 14:05.28 | Juggie | and that will get you 500 conversations |
| 14:05.30 | cio | still on the ports.. just use trigger ports man.. |
| 14:05.31 | Juggie | 2 ports per conversation |
| 14:05.36 | tzanger | * can't handle more than a couple hundred SIP calls anyway so double that (RTP in/out) and you're there |
| 14:05.37 | *** join/#asterisk cpatry (n=grepmoo@65.39.228.5) |
| 14:05.52 | Juggie | tzanger, 90% of the time, remote phones wont even use those ports |
| 14:05.54 | *** join/#asterisk mkrufky (n=mk@68.160.103.77) |
| 14:06.04 | Juggie | they will almost allways use the source port of the first rtp packet they receive |
| 14:06.08 | cio | What the hell else are you going to use those ports for? |
| 14:06.08 | tzanger | Juggie: therein lies part of the problem |
| 14:06.14 | cio | Unless you're running a game server or something ... |
| 14:06.19 | *** join/#asterisk christian2 (n=Christia@host-84-9-73-229.bulldogdsl.com) |
| 14:06.21 | lehel | people, if i want my fax working i need to setup a context for it in zapata.conf? |
| 14:06.40 | Juggie | tzanger, not really, any sensible nat device leaves the source port open for return traffic for a alotted peroid of time |
| 14:06.51 | christian2 | a quick one: I've found a bug in the 1.2 beta - how do I 1.) check if it's been reported 2.) report it if not ? |
| 14:07.08 | Juggie | christian2, #asterisk-bugs http://bugs.digium.com |
| 14:07.21 | christian2 | ta |
| 14:08.41 | lehel | anyone could help me out with fax detection on a tdm400p? |
| 14:09.03 | cio | With what type of lines? |
| 14:09.09 | *** join/#asterisk valence_ (n=valence@Quebec-HSE-ppp230300.qc.sympatico.ca) |
| 14:09.12 | cio | I've been down this road. |
| 14:09.33 | lehel | cio: isdn.. capi |
| 14:09.38 | cio | Ahh - |
| 14:10.03 | lehel | it is a canon b820 |
| 14:10.33 | lehel | and i don't have dial tone on it, however it is plugged in channel 3 of the tdm card (?) |
| 14:13.43 | Ivar-Voop | Anybody been playing with the switch statement in extensions.ael? |
| 14:16.31 | *** join/#asterisk supaigtr (n=yurplsl@152.53.16.10) |
| 14:24.10 | *** join/#asterisk anthm (n=anthmct@CPE-69-76-83-52.wi.res.rr.com) |
| 14:24.10 | *** mode/#asterisk [+o anthm] by ChanServ |
| 14:24.49 | Katty | hi anthm |
| 14:25.12 | anthm | hello |
| 14:29.25 | *** join/#asterisk mhnoyes (n=mhnoyes@user-38lc11d.dialup.mindspring.com) |
| 14:29.55 | *** part/#asterisk christian2 (n=Christia@host-84-9-73-229.bulldogdsl.com) |
| 14:30.27 | *** join/#asterisk rob314 (n=rob314@207.58.194.2) |
| 14:31.51 | *** join/#asterisk l-fy (n=pchitesc@yate/developer/l-fy) |
| 14:31.53 | l-fy | hello |
| 14:32.12 | *** join/#asterisk oej (n=Olle@apollo.webway.se) |
| 14:32.21 | l-fy | the new asterisk sends the dtmf's over pri by inline? |
| 14:36.04 | szer | what's the difference between the muxmon and chanspy? |
| 14:36.34 | cpatry | szer: i answered that question 1 hour ago in #asterisk-dev |
| 14:37.53 | bkw_ | BLOODY HELL |
| 14:38.17 | bkw_ | szer, muxmon records to disk |
| 14:38.17 | Katty | bkw_: breathe (= |
| 14:38.26 | bkw_ | chanspy is realtime spying |
| 14:38.28 | mutilator | bkw_: you heard of using a t in your Dial command helping with rtp streams? |
| 14:38.40 | bkw_ | mutilator, yes |
| 14:38.45 | bkw_ | but why would you do that |
| 14:38.56 | mutilator | i removed the t, and all day yesterday i had users calling in that audio worked in one direction and not the other |
| 14:38.56 | bkw_ | chan_local does too |
| 14:39.16 | mutilator | all were behind firewall/nat |
| 14:39.20 | mutilator | or used a softphone |
| 14:39.21 | bkw_ | sounds like native bridge was taking place |
| 14:39.23 | *** join/#asterisk FarrisG (n=jrush@h-68-164-19-170.dllatx37.covad.net) |
| 14:39.27 | szer | bkw_, the chanspy isn't record to disk the monitored chan? |
| 14:39.36 | mutilator | yea |
| 14:40.00 | mutilator | why is that? |
| 14:40.07 | FarrisG | I managed to get "presence" working, so that our admin can tell who is on the phone when a customer calls, but it only works some of the time and I can't quite figure out what the pattern is |
| 14:40.09 | mutilator | i had to add the t back into my dials |
| 14:40.11 | FarrisG | Using Polycom 501s |
| 14:41.24 | *** join/#asterisk wunderkin (i=kev@12-219-162-233.client.mchsi.com) |
| 14:41.36 | *** join/#asterisk CoffeeIV_ (n=CoffeeIV@mail.airlinksystems.com) |
| 14:42.10 | anthm | it's because by allowing t you are telling the native bridge to react to dtmf and pass it back to the outer loop which in asterisk means quit the inner loop and return the digit then go back in next time |
| 14:42.39 | anthm | if you send no feature flags at all the native bridge never exits |
| 14:42.50 | mutilator | k |
| 14:43.16 | mutilator | cause what i have is a as5350 taking in calls, then goes via SIP to asterisk then sip to customer |
| 14:46.11 | mutilator | is that noted anywhere in the wiki? |
| 14:46.59 | szer | is there any possibility to put some code in muxmon to run some application after the monitoring ended? |
| 14:48.15 | MikeJ[Laptop] | mutilator, there is also an open bug in head about rfc2833 on cisco's (rtp type 121) issues with missing digits and such |
| 14:48.50 | *** join/#asterisk rob314 (n=rob314@207.58.194.2) |
| 14:48.53 | MikeJ[Laptop] | szer, there are always possibilities... |
| 14:49.02 | szer | :) |
| 14:49.15 | MikeJ[Laptop] | anthm wrote it.. you might want to speak with him about contracting the work if you can't do it yourself |
| 14:49.35 | *** join/#asterisk Kernel-Kris (n=Kris@lfkn-fw.angelinacounty.net) |
| 14:49.49 | MikeJ[Laptop] | or, you could just do it onthe h exten of the call? |
| 14:49.57 | MikeJ[Laptop] | depends on what you are trying to do |
| 14:50.17 | Kernel-Kris | can someone help me with my extensions.conf file |
| 14:50.24 | szer | just create some mp3s from the recorded stuff |
| 14:50.32 | Kernel-Kris | not able to get any call out |
| 14:50.34 | *** join/#asterisk MikeAG (n=mgross@66.216.172.91.static.dejazzd.com) |
| 14:50.51 | MikeJ[Laptop] | szer, just run it on a remote machine, cron a script to do it every 5 min or somthing |
| 14:50.57 | mutilator | link to bug mikej? |
| 14:51.10 | MikeJ[Laptop] | because encoding the mp3's on the same box will cause load issues for asterisk |
| 14:51.27 | MikeJ[Laptop] | mutilator huh? |
| 14:51.33 | szer | i already meet with this |
| 14:51.50 | MikeJ[Laptop] | yes, I know many who do.. it's the same issue with soxmix |
| 14:51.57 | mutilator | reported on bugs.digium.com? |
| 14:51.57 | MikeJ[Laptop] | which is why muxmon is nice |
| 14:52.03 | MikeJ[Laptop] | mutilator, yes |
| 14:52.14 | mutilator | know #? |
| 14:52.30 | MikeJ[Laptop] | http://bugs.digium.com/view.php?id=5160 |
| 14:52.33 | szer | 4735 |
| 14:53.01 | MikeJ[Laptop] | szer, he's talking about the cisco 2833 dtmf issue |
| 14:53.05 | file[laptop] | what an odd odd dream |
| 14:53.11 | Kernel-Kris | can anyone help me |
| 14:53.49 | anthm | i am working on a new one now actually |
| 14:54.04 | anthm | fixing the bug in it |
| 14:55.10 | szer | sorry |
| 14:56.13 | Kernel-Kris | whereis everyone at today? |
| 14:56.14 | mutilator | ah |
| 14:56.31 | mutilator | i use inband dtmf |
| 14:57.09 | mutilator | havn't run into that issue |
| 14:58.00 | Kernel-Kris | hows the FreeBSD zaptel drivers coming along? |
| 14:59.19 | Kernel-Kris | ? |
| 15:00.34 | *** part/#asterisk Kernel-Kris (n=Kris@lfkn-fw.angelinacounty.net) |
| 15:01.24 | *** join/#asterisk Kernel-Kris (n=Kris@lfkn-fw.angelinacounty.net) |
| 15:03.29 | *** join/#asterisk will31 (n=will@207.176.159.90) |
| 15:05.29 | *** join/#asterisk Kernel-Kris (n=Kris@lfkn-fw.angelinacounty.net) |
| 15:05.55 | *** join/#asterisk hellagony (n=egutierr@200.121.129.180) |
| 15:06.30 | synthetiq | hello, im having trouble making lcoal calls, if anyone can look at my confix and tell me what is wrogn that would be great: http://pastebin.ca/23100 |
| 15:06.58 | gambolputty | I have a php script that is trying to telnet to * manager but it can't due to permission problems. Any ideas? |
| 15:07.19 | cochi|away | yeah. adjust permissions ;) |
| 15:07.30 | cochi|away | oh i'm away *shutsUp* |
| 15:08.04 | *** join/#asterisk riksta (n=rick@62.6.163.90) |
| 15:08.07 | l-fy | ok |
| 15:08.11 | l-fy | the bug report is this |
| 15:08.35 | l-fy | because of the new libpri on e1 in europe asterisk dosen't send dtmf's outbund |
| 15:08.39 | l-fy | outbound |
| 15:08.44 | l-fy | see ja guys |
| 15:08.47 | *** part/#asterisk l-fy (n=pchitesc@yate/developer/l-fy) |
| 15:09.01 | Wonka | how can i add some -v when i'm already at the console? |
| 15:09.10 | *** join/#asterisk shermster (n=chatzill@ndn-165-148-99.telkomadsl.co.za) |
| 15:09.58 | Phantom-X | I wonder , can asterisk let say answer calls for me and send different messages depending on which dtmf/cid is given ? |
| 15:10.31 | lehel | Wonka: set verbose .. |
| 15:10.46 | Wonka | lehel: thanks! |
| 15:10.54 | lehel | np |
| 15:11.11 | RickTick | Phantom: yes |
| 15:11.25 | Kernel-Kris | asterisk is new to me ............what would be a good addition to the extensions.conf file for SIP pones |
| 15:11.36 | Phantom-X | that's cool , where can I get docs about that specific stuff |
| 15:13.27 | RickTick | Phantom: the wiki site is a good place to start. exten => _xxxXXXxxxx,1,playback(blah) |
| 15:13.53 | Phantom-X | ok I see |
| 15:15.01 | *** join/#asterisk pa (n=Paolo@unaffiliated/pa) |
| 15:15.29 | Phantom-X | I think I am in love :) |
| 15:19.48 | Kernel-Kris | asterisk is new to me ............what would be a good addition to the extensions.conf file for SIP pones |
| 15:20.14 | Beirdo | ~wikis |
| 15:20.21 | jbot | i guess wikis is http://www.voip-info.org |
| 15:20.35 | mutilator | not asking the same question 5 lines later would be a good start.. |
| 15:20.54 | *** join/#asterisk shido6 (n=shido6@d221-68-210.commercial.cgocable.net) |
| 15:21.37 | *** join/#asterisk zoo (i=nobody@ip-113-16.travedsl.de) |
| 15:22.03 | CoffeeIV_ | gambolputty: what is the actual error message when the php script runs ? Is it run from a command line or from a web browser ? |
| 15:22.06 | *** part/#asterisk zoo (i=nobody@ip-113-16.travedsl.de) |
| 15:22.18 | Kernel-Kris | mutilator, thanks for all the help |
| 15:22.22 | gambolputty | php script is on apache |
| 15:22.44 | gambolputty | Permission denied (13) |
| 15:22.59 | gambolputty | tries to make a telnet connection to * manager |
| 15:23.05 | CoffeeIV_ | gambolputty: is the error on the browser or in the apache logs ? |
| 15:24.12 | gambolputty | [client 192.168.3.33] PHP Warning: fsockopen(): unable to connect to 127.0.0.1:5038 in /var/www/html/index.php on line 48, referer: http://192.168.2.4/ |
| 15:24.28 | gambolputty | I verifyied that I can connect to * manager directly with a telnet command |
| 15:24.38 | gambolputty | I pasted in manager commands and it worked |
| 15:24.45 | gambolputty | but the php part isn't working for some reason |
| 15:26.06 | JerJer | your php crap is broken then |
| 15:26.41 | gambolputty | it works fine on another box though |
| 15:26.52 | gambolputty | but not on the one I am trying to fix |
| 15:26.53 | bkw_ | lalala |
| 15:27.18 | Darwin35 | sipphoe go in sip.conf |
| 15:27.31 | Darwin35 | iax phones go in iax.conf |
| 15:27.39 | CoffeeIV_ | gambolputty: I gotta go -- check that you can type "telnet 127.0.0.1 5038" on the prompt on the asterisk computer, maybe * manager isn't running |
| 15:27.49 | Darwin35 | morning bkw |
| 15:28.01 | gambolputty | manager is running |
| 15:28.03 | gambolputty | I verifyied that I can connect to * manager directly with a telnet command |
| 15:28.04 | syzygyBSD | If I am unable to fax in my disclaimer where should i email the scan to? |
| 15:28.07 | Darwin35 | you never talk to me anymore |
| 15:28.07 | mutilator | in the manager interface.. if i dial using a macro when i run a Action: Status |
| 15:28.13 | mutilator | it shows the extension as s |
| 15:28.14 | Darwin35 | I feel so unloved |
| 15:28.17 | mutilator | any way to fix that |
| 15:28.23 | Darwin35 | lol |
| 15:29.02 | *** part/#asterisk msw (n=msw@24.172.59.42) |
| 15:29.32 | synthetiq | hello, im having trouble making lcoal calls, if anyone can look at my confix and tell me what is wrogn that would be great: http://pastebin.ca/23100 |
| 15:30.37 | *** join/#asterisk buzzyd (n=buzzyd@82-35-251-70.cable.ubr01.enfi.blueyonder.co.uk) |
| 15:31.33 | buzzyd | Hi all, can some one tell me why my sipura seems to use random ports when connecting to my Asterisk box |
| 15:31.50 | JerJer | the behavior of action: status changed |
| 15:32.07 | JerJer | perhaps your php crap hasn't been fixed to deal with the new behavior |
| 15:32.08 | syzygyBSD | synthetiq: why do you have the 'g' in Zap/g4/ |
| 15:32.19 | buzzyd | I have specified 5060 where I see it but still no joy |
| 15:33.00 | shido6 | thats a lot of rfc |
| 15:33.08 | buzzyd | good move :) |
| 15:33.18 | buzzyd | nooooooo |
| 15:33.41 | szer | bye |
| 15:33.46 | buzzyd | ah ok thats fine two's ok :) |
| 15:34.10 | anthm | MuxMon can execute commands post record btw in the latest one I thought I saw someone ask |
| 15:34.50 | syzygyBSD | buzzyd: does the source port seem random or the destination? |
| 15:35.19 | Juggie | source is random |
| 15:35.24 | Juggie | dest is what the client asks for |
| 15:35.28 | syzygyBSD | right, as it should be |
| 15:35.45 | buzzyd | on sip show peers I see random ports but all other non sipura units show 5060 |
| 15:35.57 | Juggie | yah |
| 15:35.59 | Juggie | thats just nat |
| 15:36.05 | Juggie | i get that with some phones |
| 15:36.16 | buzzyd | but that messes with my traffic shapping |
| 15:36.39 | Juggie | play with the phone |
| 15:36.41 | buzzyd | I need all sip to be 506x so I can priorities |
| 15:36.42 | Juggie | if it has a nat mode |
| 15:36.43 | Juggie | disable it |
| 15:36.47 | buzzyd | ah ok |
| 15:37.06 | Juggie | nat mode on rmote phones is evil |
| 15:37.10 | Juggie | your better off handeling it on the server |
| 15:38.12 | *** join/#asterisk fataia`falamu (i=cLeRiSY@CPE-61-9-197-32.nsw.bigpond.net.au) |
| 15:38.42 | *** join/#asterisk qWer^ (n=muhajir_@210.212.195.134) |
| 15:44.06 | *** join/#asterisk SpaceBass (n=sp@c-24-125-184-203.hsd1.va.comcast.net) |
| 15:44.08 | SpaceBass | hey folks |
| 15:44.18 | SpaceBass | anyone ever used blueface (Irish VoIP provider)? |
| 15:44.33 | SpaceBass | having problems... iax show users and show peers shows that its registered, but cannot call in or out |
| 15:44.55 | Juggie | they provide iax? |
| 15:44.58 | SpaceBass | yep |
| 15:45.01 | SpaceBass | iax2 |
| 15:45.23 | SpaceBass | sip too, which I may try next |
| 15:46.34 | Darwin35 | anyone know of a good agi script for asterisk that does weather by zipcode |
| 15:46.41 | Darwin35 | or area code |
| 15:46.53 | Darwin35 | I dont find anything in the wiki |
| 15:47.04 | Darwin35 | other then a festival setup that lame |
| 15:47.41 | *** join/#asterisk dextro (n=Miranda@209.163.224.58) |
| 15:47.56 | brettnem | wahoo did someone say something about a festival?!??? |
| 15:50.41 | bkw_ | http://www.cnn.com , Laura Bush looks scared to death |
| 15:51.39 | *** join/#asterisk pigpen (n=mark@fw.seamans.cc) |
| 15:51.53 | bkw_ | buzzyd, you still here? |
| 15:52.00 | brettnem | blah |
| 15:52.05 | bkw_ | why do you need SIP on 506X? You do realize thats just signalling right? |
| 15:52.05 | *** join/#asterisk marshall (n=test@S0106000f3dcdd088.wp.shawcable.net) |
| 15:52.06 | SpaceBass | bkw_ wouldn't you be standing next to him |
| 15:52.17 | bkw_ | the media will be different |
| 15:52.19 | SpaceBass | ok... got sip outbound working with blueface but not inbound |
| 15:52.38 | *** join/#asterisk mAsH` (n=mash@ppp-217-133-150-46.cust-adsl.tiscali.it) |
| 15:53.22 | mAsH` | hi all |
| 15:54.38 | Darwin35 | whats up with all these people haveing issues with in bound and out bound the last few days |
| 15:54.49 | Darwin35 | they get out bound working inbound breaks |
| 15:54.54 | Darwin35 | visa versa |
| 15:55.05 | *** join/#asterisk outtolunc (i=outtolun@adsl-66-218-53-170.dslextreme.com) |
| 15:55.16 | syzygyBSD | SpaceBass: are you behind a firewall at all? |
| 15:55.36 | SpaceBass | yep, but use broadvoice sip so have ports already forwarded |
| 15:55.56 | *** join/#asterisk spditner (i=simon@byte.unitycode.org) |
| 15:56.09 | SpaceBass | sip show peers shows the outbound registeration |
| 15:56.19 | SpaceBass | but show users doesnt show the registration for incoming |
| 15:56.49 | syzygyBSD | including port 4569? |
| 15:56.55 | SpaceBass | yep |
| 15:57.11 | syzygyBSD | are you using IAX or sip? |
| 15:57.17 | SpaceBass | tried both |
| 15:57.19 | SpaceBass | sip now |
| 15:57.24 | spditner | within h323.conf, how would you direct all inbound calls from a specific ip address to a context? |
| 15:58.51 | shido6 | same way you do with sip |
| 15:59.08 | shido6 | is there a southoffice example in your h323.conf ? |
| 15:59.26 | spditner | no |
| 15:59.43 | shido6 | search for h323.conf.sample |
| 15:59.46 | shido6 | on your box |
| 15:59.47 | SpaceBass | ok... fluke... blueface working now... |
| 15:59.47 | spditner | it's 1.0.9 |
| 16:00.21 | spditner | is it in head? |
| 16:00.53 | *** join/#asterisk marty1 (i=marty1@user-3109.l4.c4.dsl.pol.co.uk) |
| 16:03.30 | spditner | shido6: I don't see it in channels/h323/h323.conf.sample for 1.0.9, or HEAD. Is there a different example somehwere else? |
| 16:04.20 | *** join/#asterisk fugitivo (n=ajf@201.255.100.115) |
| 16:04.24 | shido6 | hrmm |
| 16:05.13 | *** join/#asterisk obiyoda (n=chatzill@ns2.globalmart.com) |
| 16:06.39 | obiyoda | Is there an IRC channel for Asterisk at Home? |
| 16:07.20 | Darwin35 | yeah its called asterisk |
| 16:07.25 | mutilator | if i reload app_voicemail does it reload the configuration too? |
| 16:09.57 | shido6 | Im oldskewl and unload app_voicemail.so |
| 16:10.00 | obiyoda | Is there an easy way with Asterisk@hiome to record calls? |
| 16:10.01 | shido6 | load app_voicemail.so |
| 16:10.33 | shido6 | its right there |
| 16:10.38 | shido6 | in the gui |
| 16:10.45 | shido6 | when u add the extension |
| 16:10.57 | shido6 | then view the dialplan extensions.conf to see what triggers it |
| 16:13.16 | mutilator | i spose it does |
| 16:16.07 | *** join/#asterisk jsb32 (n=gravitis@128.100.33.138) |
| 16:16.43 | jsb32 | hey -- I'm wondering if asterisk is working properly.. Port 5060 doesn't seem to be open -- I'm trying to connect my polycom phone |
| 16:18.31 | *** join/#asterisk Joelsolanki (n=joelsola@202.160.161.93) |
| 16:18.58 | Joelsolanki | Hello room |
| 16:19.46 | Joelsolanki | i have installed asterisk on redhat 9 and i have sip service provider. |
| 16:20.02 | Kernel-Kris | redhats the problem |
| 16:20.18 | jsb32 | ? |
| 16:20.20 | Joelsolanki | hehe joking ? |
| 16:20.39 | syzygyBSD | i run it on fedora with no problems |
| 16:20.47 | mkrufky | me too |
| 16:20.57 | syzygyBSD | Joelsolanki: what is your question? |
| 16:21.06 | jsb32 | I had to disable most of selinux to get amportal to work... |
| 16:21.10 | Corydon-w | I'm getting a telco drop in line voltage just before a ring when I try to place a call from a TDM04B. With kewlstart, this is seen as a hangup. Anybody know if there's a parameter I can use to fix this? Or alternately, what I can ask the telco to change? |
| 16:21.18 | Joelsolanki | yes let me tell. u. |
| 16:21.22 | pfn | unless you're trying to built a locked-down box, selinux is overkill |
| 16:21.33 | pfn | locked-down = bare essentials only |
| 16:21.43 | *** join/#asterisk epablo (n=epablo@200.75.139.188) |
| 16:21.45 | pfn | a la a kerberos kdc or a pki ca provider |
| 16:21.47 | epablo | Hi people.. |
| 16:22.14 | jsb32 | anyway - question: it seems as though asterisk isn't properly listening on 5060.. how can I check? |
| 16:22.26 | Joelsolanki | i have installed asterisk on redhat 9 and i have sip voip provider. i have configured my sip.conf and extension.conf and i have linksys pap2 device but some how things are not working. so let me give u the configuration. |
| 16:22.29 | syzygyBSD | jsb32: netstat -na|grep 5060 |
| 16:23.09 | jsb32 | syzygyBSD: I only get a single line, (UDP), ending in 0.0.0.0:* |
| 16:24.03 | epablo | I've got a quick question. I have 2 asterisk servers. 1 is a Gw with a E1 and the other has the sip clients. I need to be ables to send calls between them, to the respective extensions. How do I set that up, using SIP |
| 16:25.27 | Juggie | use iax |
| 16:25.33 | Juggie | to send calls between * servers. |
| 16:25.43 | syzygyBSD | jsb32: that means that it is listening for connections from anyone |
| 16:26.03 | epablo | Juggie: I heard that loads the machine more.. and I cant get the same throughput |
| 16:26.10 | syzygyBSD | asterisk is listening, do you have a firewall at all? |
| 16:26.19 | Juggie | epablo, heard from who |
| 16:26.22 | Joelsolanki | this is my asterisk configuration http://pastebin.ca/23111 |
| 16:26.27 | Juggie | iax uses less bandwidth, if you use iax trunking |
| 16:26.32 | mistik1 | hey guys/gals |
| 16:26.36 | jsb32 | syzygyBSD: shouldn't be a firewall, nope... These damned polycom phones are a PIA.. |
| 16:26.38 | Joelsolanki | can anybody look what is wrong in my configuraiton? |
| 16:26.58 | jsb32 | syzygyBSD: There's no indication in the full asterisk log that the phone is making any connection at all... |
| 16:27.08 | epablo | Juggie: Read it here. but I'll do that then.. thanks |
| 16:27.22 | syzygyBSD | jsb32: well is your phone setup right? |
| 16:27.38 | jsb32 | syzygyBSD: grr... it bloody well seems to be! :) |
| 16:28.02 | Darwin35 | j32 whats up |
| 16:28.16 | Darwin35 | ok bsd |
| 16:28.16 | Joelsolanki | can anybody help me ? |
| 16:28.16 | jsb32 | polycom phone isn't making any connection to asterisk... |
| 16:28.31 | mistik1 | I am seeking to implement a system over asterisk, that will call a list of numbers and play a message to this list in my own voice, Is there such an application in asterisk already or would that be something in need of writing? |
| 16:28.36 | Darwin35 | turn off the password in your sip.conf |
| 16:28.43 | Darwin35 | and see if it connects |
| 16:28.44 | mistik1 | what i'm after is like a reminder system |
| 16:28.55 | Darwin35 | its a sip phone right |
| 16:29.17 | jsb32 | Darwin35, yeah, its a sip phone |
| 16:29.34 | mistik1 | One which for example a doctors office would use to call a list of patients to remind them of thier appointment times and such. |
| 16:29.38 | Joelsolanki | can anybody help / suggest me? |
| 16:30.07 | syzygyBSD | Joelsolanki: Try one thing at a time, can your linksys connect to asterisk? |
| 16:30.46 | Joelsolanki | syzygyBSD: how to test that? |
| 16:30.55 | pfn | darix but that doesn't cover branching or deletions, does it |
| 16:30.59 | DarthClue | mistik1, you would need to write something for that, but it wouldn't be too hard to do. |
| 16:31.06 | jsb32 | http://pastebin.ca/23112 <---- sip.conf config for the phone... should work |
| 16:31.11 | pfn | indeed |
| 16:31.24 | pfn | oops |
| 16:31.25 | pfn | oops |
| 16:31.35 | syzygyBSD | Joelsolanki: are you in the asterisk console? |
| 16:31.39 | Joelsolanki | yes |
| 16:32.09 | mistik1 | DarthClue: would you have any idea where I would start to look for info on writing this module? |
| 16:32.17 | Joelsolanki | syzygyBSD: yes i m in asterisk console |
| 16:33.16 | DarthClue | mistik1, you would need a script that can create call files or generate the calls using originate. you would need pre-recorded sound files that would be played for each call. |
| 16:33.19 | syzygyBSD | Joelsolanki: if you reconnect your linksys does it show up as connecting? |
| 16:33.56 | *** join/#asterisk apardo (n=apardo@23.Red-83-44-179.pooles.rima-tde.net) |
| 16:33.59 | Joelsolanki | syzygyBSD: no it doesnt display anything in asterisk console when i start the linksys device. |
| 16:34.15 | Kernel-Kris | Darwin35, hey you still in the mood to help |
| 16:34.41 | syzygyBSD | Joelsolanki: what is your debug level? ie what did you start asterisk with 'asterisk -vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvdr' |
| 16:35.46 | Joelsolanki | syzygyBSD: asterisk -vvvvvvvvvvvvvvr |
| 16:36.20 | Joelsolanki | syzygyBSD: should i increase it ? |
| 16:36.24 | syzygyBSD | ok, so your linksys isn't configured to connect to asterisk |
| 16:36.32 | syzygyBSD | no, that is plenty |
| 16:37.11 | *** join/#asterisk myiagy (n=myiagy@200.138.215.78) |
| 16:37.15 | Joelsolanki | no i have configured linksys pap2 to connect to asterisk. |
| 16:37.28 | Joelsolanki | it means request is not coming on asterisk server |
| 16:37.31 | shido6 | Shweet |
| 16:37.37 | shido6 | I love the pap2 |
| 16:38.26 | *** join/#asterisk SplasPood (i=jwb@ludicrous.paravolve.net) |
| 16:38.45 | *** join/#asterisk syle2 (n=blag@unaffiliated/syle) |
| 16:39.15 | mistik1 | DarthClue: let me ask you this, Could you write such a script? |
| 16:39.23 | JerJer | all the sipura ata's are very nice |
| 16:39.38 | syzygyBSD | I have never used pap2, maybe someone else can help with that then |
| 16:40.28 | Joelsolanki | syzygyBSD: ok no problem. i will check once again and let u know if i need help with asterisk :) |
| 16:40.29 | JerJer | what's so hard? configure each line with your SIP information |
| 16:40.47 | JerJer | in the admin page, of course |
| 16:40.47 | DarthClue | mistik1: if you want to send me the specs of what you are looking for and how active your system is I can get back to you with a quote. I've got something similar to this written already but it would have to be modified to do what you want. |
| 16:40.54 | *** join/#asterisk apardo (n=apardo@23.Red-83-44-179.pooles.rima-tde.net) |
| 16:41.32 | *** join/#asterisk |dennis| (n=dennis@200.32.215.82) |
| 16:41.35 | mistik1 | DarthClue: that's most excellent. do you mind a /msg so we can exchange contact info? |
| 16:42.09 | *** join/#asterisk msw (n=msw@24.172.59.42) |
| 16:42.18 | *** join/#asterisk usam (n=usam@203.156.122.225) |
| 16:43.28 | usam | HEllo, Just wondering if any1 has successfully used LCDial application .. getting "No Provider available for the destination" all the time :( |
| 16:43.37 | JerJer | lol |
| 16:44.22 | brettnem | any1?? is that anything like ne1? |
| 16:44.46 | Qwell | brettnem: completely different |
| 16:45.41 | brettnem | hmm |
| 16:45.42 | Darwin35 | back |
| 16:45.49 | Darwin35 | ok did it register |
| 16:46.36 | *** part/#asterisk epablo (n=epablo@200.75.139.188) |
| 16:47.29 | *** join/#asterisk zedkatuf (n=knoppix@82-33-115-145.cable.ubr08.azte.blueyonder.co.uk) |
| 16:48.08 | Darwin35 | man I wish my burner had not died |
| 16:48.18 | Darwin35 | Ineed a install cdrom |
| 16:49.35 | *** join/#asterisk jimmy_deanPB (n=jhodapp@adsl-70-228-242-126.dsl.ipltin.ameritech.net) |
| 16:50.40 | cpatry | go buy another 1? |
| 16:50.47 | cpatry | its like 30 $ |
| 16:50.48 | shido6 | how many do you need? |
| 16:50.58 | bkw_ | 1 billion |
| 16:51.04 | shido6 | slot load, dual layer, |
| 16:51.19 | tzanger | ok RJ45/48 is 8-conductor, RJ11 is 4 conductor, what is the "mini" RJ connector used between handsets and telephone bases? |
| 16:51.48 | JerJer | Rj-12 ? |
| 16:52.02 | shido6 | 52X LG |
| 16:52.16 | Darwin35 | I am broke till payday next week |
| 16:52.28 | shido6 | $32.41 |
| 16:53.48 | *** join/#asterisk miah (n=miah@chia-pet.org) |
| 16:53.56 | miah | hi, any of you using broadvoice for voip? |
| 16:54.38 | Essobi | Meh. |
| 16:54.51 | mAsH` | i have to use CVS to use direct pickup ? |
| 16:54.53 | Essobi | How do you grab a certain date of cvs.. I can't remeber |
| 16:54.53 | Qwell | tzafrir: rj11 is 6 |
| 16:54.58 | Qwell | erm, tzanger |
| 16:55.02 | Qwell | isn't it? |
| 16:55.14 | Essobi | 11 is 4 |
| 16:55.24 | Qwell | 12 is 4, which is why its thiner |
| 16:55.37 | tzanger | RJ11 is a standard telephone cable connector and it can do 6 pins yes |
| 16:55.48 | tzanger | so RJ11 is 6 pin RJ12 is 4 "mini" version of RJ11 |
| 16:55.55 | tzanger | what is the difference between RJ45 and RJ48? |
| 16:56.00 | Qwell | tzanger: wiring |
| 16:56.10 | tzanger | Qwell: that's it? it's teh same connector otherwise |
| 16:56.14 | Qwell | yes, afaik |
| 16:56.17 | tzanger | hmm |
| 16:56.23 | Qwell | 48 is like T1, right? |
| 16:56.24 | Himeko | nah, rj12 is the same crystal |
| 16:56.51 | outtolunc | http://www.accesscomms.com.au/RJreference.htm |
| 16:56.51 | Himeko | the different names have to to with the way you wire them |
| 16:57.06 | Qwell | 11 and 12 ARE different |
| 16:57.12 | Qwell | erm |
| 16:57.35 | mutilator | if i use gotoif[02 > 01] will it work? |
| 16:57.41 | mutilator | or will the preceding 0 mess it up |
| 16:57.45 | Qwell | that site says rj12 is 6 position |
| 16:57.59 | Himeko | it is |
| 16:58.04 | Himeko | so are alot of them |
| 16:58.17 | Qwell | the one for handsets is 4 pin though |
| 16:58.20 | Himeko | it's wireling and application that gives them the different numbers |
| 16:58.48 | Himeko | ya, i've always seen those prefaced with a "mini" |
| 16:59.31 | tzanger | that reference doesn't show any 4 position jack |
| 16:59.49 | Qwell | aren't there a few below 11? like 8 |
| 17:00.47 | CoffeeIV_ | Does anyone use the * voicemail storage in a database stuff ? You know where it keeps the VM messages in mysql -- does it work ? |
| 17:01.14 | SwK[Work] | CoffeeIV_: i guess it works |
| 17:01.37 | Qwell | rj8, rj10, rj22 are all 4 position, supposedly |
| 17:01.43 | Supaplex | Does Digium offer free phone support for random crashes in asterisk? |
| 17:02.11 | cpatry | Supaplex: submit a report on bugs.digium.com |
| 17:02.54 | Qwell | yeah, google is saying handsets are rj10 |
| 17:03.33 | Qwell | isn't rj11 on the phone, and rj12 is on the wall? |
| 17:05.08 | cpatry | handset is rj10, wall is rj-11. |
| 17:10.35 | *** join/#asterisk apeman (n=cmurray@zoidberg.digital-storm.net) |
| 17:16.42 | Nugget | my hair is no longer cyan. |
| 17:16.51 | Nugget | need to get it cut now and maybe dye it back to normal |
| 17:17.59 | *** join/#asterisk stkn__ (i=nobody@gentoo/developer/pdpc.active.stkn) |
| 17:18.18 | Qwell | cyan? |
| 17:21.36 | *** join/#asterisk GreyFoxx (i=greg@out.of.phaze.org) |
| 17:21.56 | Nugget | yeah, I've had cyan hair for the past month or so. |
| 17:22.00 | Nugget | but now it's all faded. |
| 17:26.05 | GreyFoxx | Anyone happen to know of a Canadian seller of the OEM X100P cards ? All I can find are people on ebay who want crazy shipping fees :) |
| 17:26.18 | synthetiq | <PROTECTED> |
| 17:26.19 | *** join/#asterisk Cresl1n (n=matt@gateway.digium.com) |
| 17:26.22 | synthetiq | what does that mean |
| 17:26.29 | cpatry | greendisease: X100p is deprecated |
| 17:26.41 | cpatry | but i can sell one if u want. |
| 17:26.50 | synthetiq | when i dial from my sip phone it goes to the number, when i idal from an outside number in it gies me that error |
| 17:27.21 | spackle | Just got my TE411P card back from Digium this morning. |
| 17:27.34 | spackle | There are some dramatic improvements. |
| 17:27.41 | synthetiq | what did they do |
| 17:27.44 | GreyFoxx | cpatry: I'm looking to pickup 3 of them. |
| 17:27.47 | synthetiq | does the echo can work? |
| 17:27.59 | spackle | firmware upgrade and added the echo can daughterboard. |
| 17:28.02 | cpatry | GreyFoxx: i just have 2 for dev, sorry |
| 17:28.05 | shido6 | smell it |
| 17:28.24 | spackle | heh |
| 17:29.31 | *** join/#asterisk flynux (i=lan4dij@cl-8.bru-01.be.sixxs.net) |
| 17:29.31 | shido6 | I can ship xpress post |
| 17:29.35 | spackle | Yeah, I'd say the echo can works. |
| 17:29.50 | spackle | I called my wife who is always complaining about echo. |
| 17:30.06 | spackle | her first question is usually "Areyou calling me on a VOIP phone?" |
| 17:30.30 | spackle | all she could hear was the computer room in the background and no echo. |
| 17:31.38 | synthetiq | what di dthey modify |
| 17:31.47 | synthetiq | cuz my te411- cards need the echoc ans fixed |
| 17:32.58 | spackle | synthetiq: do you have the echo can daughterboard on yours? |
| 17:33.10 | synthetiq | yes |
| 17:33.38 | spackle | I'm not sure, it was just updated to the most recent firmware. I didn't have the daughterboard before. |
| 17:33.49 | malverian[work] | I'm getting random (significant) echo when making calls over the PRI to certain numbers. I have echo training/cancellation enabled and it only seems to happen to certain numbers. |
| 17:33.58 | synthetiq | firmware??? wtf |
| 17:34.19 | synthetiq | malverian adjsut gaines from rx+6 and tx -5 |
| 17:34.23 | malverian[work] | I'm using a TDM110P with the firmware that came with the card... |
| 17:34.28 | synthetiq | ok anyone can answer my question |
| 17:34.31 | spackle | synthetiq: They announced new firmware for them about a month ago. |
| 17:34.51 | synthetiq | ok ill have to check on that |
| 17:34.55 | spackle | synthetiq: It's a free upgrade but they have to do it so you have to ship your card back. |
| 17:34.58 | malverian[work] | synthetiq, Think that will help? It's only happening to the phone here.. the person dialing from out line hears their own voice echoing. |
| 17:35.15 | spackle | The next revision of firmware might be user-installable. |
| 17:35.16 | *** join/#asterisk buddah (n=djbrianc@67.110.253.129) |
| 17:36.18 | synthetiq | my current issue is.... i can dial a number thats a remote iax from my sip phone going to myasterisk machine, but when peopel try to dial in from an out side number it doesnt go thru, jsut gives this error Everyone is busy/congested at this time (1:0/0/1) |
| 17:36.56 | synthetiq | ==wtf? |
| 17:38.31 | malverian[work] | Are there firmware upgrades for the TDM110P that can be installed? |
| 17:41.15 | Juggie | heh |
| 17:41.28 | Juggie | heh, my TE411P just arrived |
| 17:41.36 | Juggie | i love getting thousand dollar hardware i didnt pay for |
| 17:41.44 | buddah | whats the syntax to send someone to a specific context of voicemail.conf? |
| 17:41.59 | buddah | is it exten => 1234,1,VoiceMailMain(context) |
| 17:42.00 | buddah | ? |
| 17:42.04 | Juggie | no |
| 17:42.15 | Juggie | VoiceMailMain({$EXTEN}@context |
| 17:42.17 | Juggie | er, ) |
| 17:42.23 | buddah | ok |
| 17:42.27 | buddah | awesome |
| 17:43.58 | bjohnson | synthetiq: bump up the logging level |
| 17:44.38 | *** join/#asterisk tris (i=tristan@camel.ethereal.net) |
| 17:45.13 | bjohnson | synthetiq: if you can dial out but not in, it's likely a sip.conf/iax.conf issue (perhaps pointing to bad context or bad authentication config) |
| 17:48.48 | *** join/#asterisk azzie_ (n=az@azzie.net) |
| 17:49.29 | *** join/#asterisk PakiPenguin (n=uppal@linuxpakistan/admin/pakipenguin) |
| 17:51.08 | buddah | now i keep getting login incorrect |
| 17:51.14 | buddah | and cant log in for voicemail |
| 17:52.03 | buddah | oh |
| 17:52.04 | buddah | lol |
| 17:52.19 | buddah | forgot zee $ |
| 17:56.21 | *** join/#asterisk r0d3nt (i=r0d3nt@tinfoilhat.net) |
| 17:57.02 | *** join/#asterisk nowster (n=pm@glanrhyd.zetnet.co.uk) |
| 17:57.08 | *** join/#asterisk Samoied (n=Samoied@popeye.opens.com.br) |
| 17:57.42 | nowster | anyone notice that the Wiki is wrong for the syntax of Dial(Modem) in 1.0.9? |
| 17:58.14 | Nugget | Fix it. |
| 17:58.26 | cpatry | nowster: theres a lot of errors in the wikis, please fix that :) |
| 17:58.44 | nowster | It *might* be a bug, of course. :) |
| 17:58.47 | *** join/#asterisk diaolos (n=alex@krital.ath.forthnet.gr) |
| 17:59.13 | diaolos | hello all |
| 17:59.21 | nowster | exten => _9X.,1,Dial(Modem/g1:${EXTEN},60,r) is what works. |
| 17:59.22 | *** join/#asterisk r0d3nt|m (i=r0d3nt@tinfoilhat.net) |
| 17:59.37 | nowster | exten => _9X.,1,Dial(Modem/g1/${MSN}:${EXTEN},60,r) is what's in the wiki. |
| 17:59.47 | Nugget | So fix it. |
| 18:00.00 | Qwell | What is ${MSN}? |
| 18:00.10 | nowster | "Multiple Subscriber Number" |
| 18:00.25 | diaolos | I am trying to setup asterisk on a p2 400 w 196mb ram and a fritz pci card (for a while now) |
| 18:00.31 | nowster | The outgoing caller number on the ISDN bus. |
| 18:00.46 | diaolos | i started with asterisk at home centos 3.5 based distro |
| 18:01.03 | diaolos | but could not compile the fritz drivers at all |
| 18:01.18 | diaolos | so i tried suse 9.3 which has builtin support |
| 18:01.43 | diaolos | it detected the card but it wouldnt boot (i imagine ram wasnt enough even for a minimal system with no fb) |
| 18:02.01 | diaolos | so i have installed gentoo now |
| 18:02.08 | *** join/#asterisk ctooley (n=ctooley@rrcs-24-227-212-181.sw.biz.rr.com) |
| 18:02.45 | diaolos | card and capi are working..but have been emerging for 2 days all the AMP dependencies..and there is no AMP ebuild |
| 18:03.20 | diaolos | i am wondering if someone here can suggest an easier solution as i am so frustrated with my lost time, i am willing to start again |
| 18:04.03 | diaolos | are there other linux ditributions that have AVM fritz support? or are there binaries for cent os? certainly the howto instructions are very out of date |
| 18:05.00 | diaolos | anyone? |
| 18:05.32 | MikeJ[Laptop] | for AMP? |
| 18:05.38 | MikeJ[Laptop] | probably not... |
| 18:05.44 | diaolos | not for AMP |
| 18:05.45 | MikeJ[Laptop] | I think they have a mailing list tho |
| 18:05.51 | diaolos | for AVM fritz pci card |
| 18:06.02 | MikeJ[Laptop] | no idea, sorry.. don't even know what those are |
| 18:06.10 | myke | i didn't have the greatest experience with amp |
| 18:06.10 | diaolos | isdn cards.. |
| 18:06.16 | myke | had to rewrite all the configs by hand anyway |
| 18:06.23 | spackle | MikeJ: Are you from Digium? |
| 18:06.35 | MikeJ[Laptop] | MISDN support is going into asterisk tree probably this week.. |
| 18:06.39 | diaolos | yeah but i figured since its what asteriskathome distributes it was the best |
| 18:06.42 | MikeJ[Laptop] | spackle, no, why? |
| 18:07.01 | spackle | MikeJ: You always seem to know what it going on. |
| 18:07.03 | Katty | diaolos: beep! |
| 18:07.03 | diaolos | are there any similar but simpler to setup web tools? i just want to test if asterisk works on my gentoo |
| 18:07.09 | myke | if you can deal with editing config files by hand i think yr better off doing straight asterisk and not amp |
| 18:07.10 | MikeJ[Laptop] | I talk to people alot |
| 18:07.17 | MikeJ[Laptop] | and work the bugtracker alot |
| 18:07.26 | DarthClue | dialos, um, a@h isn't the greatest thing in the world. |
| 18:07.28 | twisted[asteria] | MikeJ[Laptop] is an attention whore :P |
| 18:07.31 | *** join/#asterisk TxRx (n=rxtx@adsl-dyn-233-102.heliweb.de) |
| 18:07.31 | myke | i found it way easier to get asterisk working that way than going the amp route |
| 18:07.32 | spackle | aha |
| 18:07.33 | TxRx | hi^^ |
| 18:07.39 | DarthClue | MikeJ is manning the security cameras, that's how he knows. |
| 18:07.41 | MikeJ[Laptop] | twisted is an... |
| 18:07.49 | MikeJ[Laptop] | well just a whore :P |
| 18:07.55 | diaolos | ok so i will try the config files |
| 18:07.58 | twisted[asteria] | MikeJ[Laptop], hahahaha no. |
| 18:08.01 | Katty | MikeJ[Laptop]: your whore? |
| 18:08.01 | MikeJ[Laptop] | wassup twisted. |
| 18:08.02 | TxRx | can anyone help me ? -> I've setup'd zaphfc .. with this howto: http://www.pro-linux.de/work/asterisk/asterisk-1.html, the kernel module is loaded, the card was detected successfully but when i want to start ztcfg it returns /aborts with: ZT_CHANCONFIG failed on channel 1: Invalid argument (22) |
| 18:08.10 | twisted[asteria] | MikeJ[Laptop], eating lunch, bout to get to work |
| 18:08.17 | MikeJ[Laptop] | and your comment on that thing was understood. |
| 18:08.19 | TxRx | --> the detected card: zaphfc: CCD/Billion/Asuscom 2BD0 configured at mem 0xd0994f00 fifo 0xc9888000(0x9888000) IRQ 11 HZ 100 |
| 18:08.22 | jarrod | is there a way i can have SER share registry inforamtion so requests (invites) can come to either proxy and they can authenticate the user? |
| 18:08.49 | twisted[asteria] | MikeJ[Laptop], ;) frustration rules the nation |
| 18:08.55 | MikeJ[Laptop] | yes indeed |
| 18:09.28 | diaolos | something else. since i installed asterisk on gentoo there is some cron job that runs asterisk wakeups that emails me every minute /bin/bash: /var/lib/asterisk/agi-bin/run_wakeups: No such file or directory |
| 18:09.43 | diaolos | any idea what that is? will it be resolved once i configure asterisk? |
| 18:09.58 | *** join/#asterisk bassie (n=bas@datarack.xs4all.nl) |
| 18:12.16 | obsidian-studios | diaolos: I have run * on gentoo for a while, never ran into that cron issue? Might want to hit up gentoo-voip with that ?, but it's not one I have seen, check your /etc/crontab for an entry, or your /etc/cron.hourly /etc/cron.daily dirs. |
| 18:12.44 | Qwell | if its every minute, it'll be in /etc/crontab |
| 18:13.09 | *** join/#asterisk apardo (n=apardo@23.Red-83-44-179.pooles.rima-tde.net) |
| 18:13.15 | diaolos | thanks guys will try |
| 18:13.17 | obsidian-studios | Qwell: true, ignored the minute part :o |
| 18:13.22 | Qwell | seems silly to have cron run an agi...why doesn't it just create a call file? |
| 18:13.52 | buddah | ok, so i got [brf] in voicemail.conf with 20 boxes, 101-120, then in extensions.conf i have exten => 12345,1,VoiceMailMain(${EXTEN}@brf) |
| 18:13.53 | buddah | is that right? |
| 18:14.02 | buddah | when i try to log into any mailbox it says login incorrect |
| 18:14.15 | malverian[work] | What's the best way to ring ALL SIP channels? |
| 18:14.30 | Qwell | buddah: looks right |
| 18:15.09 | syzygyBSD | I am trying to get sox to work with mp3s, I have recompiled it after I had the libmad and libmp3lame libraries installed but it still doesn't support it |
| 18:15.54 | malverian[work] | Do I have to manually put every number or is there something like "Dial(SIP/*)" that would work? |
| 18:15.54 | *** join/#asterisk Gunnar (n=gunnar@34.80-203-209.nextgentel.com) |
| 18:16.21 | buddah | http://pastebin.ca/23125 |
| 18:16.23 | buddah | thats what happens |
| 18:17.31 | Qwell | and the login and password are 12345? What were you saying about 101-120 earlier? 12345 isn't in that range |
| 18:17.35 | kpettit | any good open asterisk log/call analizers? |
| 18:18.01 | buddah | 12345 i added in with 101-120 |
| 18:18.04 | buddah | forgot that |
| 18:18.11 | Qwell | with a password of 12345? |
| 18:18.16 | buddah | yeah |
| 18:18.29 | Qwell | What does the line look like? |
| 18:18.31 | malverian[work] | Anyone? |
| 18:18.33 | Qwell | in voicemail.conf |
| 18:18.45 | buddah | 12345 => 12345 |
| 18:19.53 | *** join/#asterisk kg (n=kg@chello062179062077.chello.pl) |
| 18:19.53 | obsidian-studios | malverian[work]: I am looking for a way as well, but for now am manually entering them via &, have not seen any sip groups? I think there is a better way? |
| 18:19.53 | buddah | do i need more than just the box# and password? |
| 18:20.01 | Qwell | Don't think so |
| 18:20.10 | *** join/#asterisk mjr^^ (n=muhajir_@210.212.195.134) |
| 18:20.15 | buddah | -- Executing VoiceMailMain("SIP/office-4954", "12345@brf)") in new stack |
| 18:20.16 | buddah | i see that |
| 18:20.29 | buddah | the ${EXTEN} is picking up what i call correct? |
| 18:20.38 | buddah | since i'm dialing 12345 to get to the vmail |
| 18:20.52 | Qwell | for fun, try Voicemailmain(s12345@brf) |
| 18:21.02 | buddah | ok |
| 18:21.15 | mjr^^ | can any one tell me which is the cheapest sip provider to call pc to telphone from us to india |
| 18:21.29 | mjr^^ | can any one tell me which is the cheapest sip provider to call pc to telphone from us to india |
| 18:21.31 | Essobi | Is there anyway to lower the mixing latency on a meetme for expense of cpu |
| 18:21.37 | buddah | nope |
| 18:21.39 | buddah | still incorrect |
| 18:21.58 | Qwell | buddah: s skips the password check, so something is obviously wrong in voicemail.conf |
| 18:22.02 | buddah | hmm |
| 18:22.03 | buddah | ok |
| 18:22.06 | buddah | i'll look over it again |
| 18:22.37 | mjr^^ | can any one tell me which is the cheapest sip provider to call pc to telphone from us to india |
| 18:23.49 | mjr^^ | with good quality voice |
| 18:24.17 | mjr^^ | any website plz |
| 18:27.13 | miah | www.google.com? |
| 18:27.18 | miah | do the work yourself? |
| 18:27.24 | Essobi | you might find something on www.voip-info.org |
| 18:29.15 | mjr^^ | k |
| 18:29.19 | mjr^^ | thanks |
| 18:33.05 | MikeJ[Laptop] | asking 3 times in 1 min will usually get people to ignore you, not help you.. |
| 18:33.29 | MikeJ[Laptop] | it's kindof like saying that your question is more important that whatever anyone else is doing. |
| 18:33.51 | file | which isn't true :P |
| 18:33.54 | Essobi | psh |
| 18:33.54 | Qwell | MikeJ[Laptop]: it was slightly longer then a minute ;] |
| 18:34.04 | Essobi | :) |
| 18:34.22 | MikeJ[Laptop] | twice at 21 after the hour, then at 22 after??? not much longer. |
| 18:34.42 | MikeJ[Laptop] | Can anyone program my asterisk? |
| 18:34.42 | MikeJ[Laptop] | Can anyone program my asterisk? |
| 18:34.49 | fugitivo | sure |
| 18:34.51 | fugitivo | why not |
| 18:34.54 | MikeJ[Laptop] | Can anyone program my asterisk? |
| 18:34.57 | MikeJ[Laptop] | :) |
| 18:35.03 | fugitivo | hehe |
| 18:35.18 | Qwell | MikeJ[Laptop]: paypal.com |
| 18:35.45 | MikeJ[Laptop] | :O |
| 18:35.49 | fugitivo | i don't ask for money, i have a thinkgeek wish list of $2000 |
| 18:35.55 | Essobi | I R TEH c0D3R |
| 18:35.59 | MikeJ[Laptop] | heh |
| 18:36.03 | spackle | hehe |
| 18:36.03 | MikeJ[Laptop] | GEEK! |
| 18:36.14 | spackle | he must be leet |
| 18:36.28 | fugitivo | 1337 |
| 18:37.09 | *** join/#asterisk nagl (n=nagl@213.235.241.6) |
| 18:37.56 | buddah | omg |
| 18:37.58 | buddah | i'm so dumb |
| 18:38.50 | mjr^^ | hehe |
| 18:39.25 | mutilator | astdb have much of a size/speed problem? |
| 18:39.42 | buddah | got the voicemail |
| 18:39.43 | buddah | working |
| 18:39.45 | buddah | :D |
| 18:39.48 | *** join/#asterisk lordcian (n=lordcian@209.194.32.60) |
| 18:40.24 | *** part/#asterisk lordcian (n=lordcian@209.194.32.60) |
| 18:43.57 | bassie | hello |
| 18:43.57 | malverian[work] | obsidian-studios, Yeah.. I already use that for several ring groups.. but I don't want to have to manually do everyone for the "ALL" group. |
| 18:44.02 | bassie | somebody using FWD |
| 18:44.18 | bassie | I keep getting registration refused errors |
| 18:44.30 | *** join/#asterisk Mike_TK (n=Mike@ip-80-242-42-206.aramiska-arc.aramiska.net) |
| 18:44.43 | Qwell | buddah: What was the problem? |
| 18:44.46 | Nivex | bassie: I'm registered ok to FWD on IAX |
| 18:45.01 | buddah | the phone i was using didnt have a mailbox= |
| 18:45.03 | buddah | in sip.conf |
| 18:45.03 | buddah | lol |
| 18:45.09 | bassie | nivex: how long did it take for your account to be active |
| 18:45.35 | Nivex | bassie: It's been awhile since I created it so I don't recall exactly. 10-30 minutes I think. |
| 18:46.09 | bassie | nivex: the username is the phone no + pass, right? |
| 18:47.08 | bassie | uhm the credentials are the phone# + pass was what I meant :) |
| 18:47.55 | Darwin35 | ok I think I made a great clean layout. to standardize asterisk extensions.conf |
| 18:47.57 | Mike_TK | Hello. Can anyone tell me if there is any implementations (patches) of SIP jitter that can be applied to CURRENT / HEAD / 1.2b ? |
| 18:48.03 | Darwin35 | makes it easy to fallow |
| 18:48.40 | Nivex | bassie: register => 64357:xxxxxx@iax.fwdnet.net |
| 18:49.28 | *** join/#asterisk Tili (i=Tili@202-133-65-13-dialup.sat.net.pk) |
| 18:49.40 | malverian[work] | Is there any way to ring all extensions for specific channel type? Eg.. dial all SIP extensions. |
| 18:49.50 | bassie | nivex: thanks, that is what I use. |
| 18:50.00 | bassie | weird |
| 18:50.04 | buddah | hmm, next issue, it picks up 12345, and goes to 12345@brf in voicemail.conf |
| 18:50.04 | bkw_ | malverian[work], no |
| 18:50.10 | buddah | how can i make it so it doesnt? |
| 18:50.16 | buddah | so i can have 1 line for all 20 users? |
| 18:50.21 | Essobi | malver Hand craft a Dial() |
| 18:50.21 | bkw_ | what? |
| 18:50.23 | gnarf37 | malverian[work]: not directly no, but you could write something that does Dial(SIP/1&SIP/2&SIP/3) etc.. |
| 18:50.25 | *** join/#asterisk apardo (n=apardo@23.Red-83-44-179.pooles.rima-tde.net) |
| 18:50.38 | bkw_ | buddah, what do you mean? show me the entry in vm.conf |
| 18:50.54 | buddah | yeah i forgot the prior part of what i'm doing |
| 18:50.55 | buddah | lol |
| 18:51.20 | buddah | i got exten => 12345,1,VoiceMailMain(${EXTEN}@brf) |
| 18:51.22 | buddah | in extensions |
| 18:51.33 | gnarf37 | Darwin35: what you got? :) |
| 18:51.33 | buddah | in sip.conf for phone i have mailbox=106@brf |
| 18:51.44 | buddah | but when i dial in, and try the pw for 106 it wont work |
| 18:51.48 | buddah | only works for 12345 mailbox |
| 18:52.12 | Darwin35 | http://pastebin.ca/23129 |
| 18:52.13 | Qwell | you need a 106,1,Voicemailmain(${EXTEN}@brf) also |
| 18:52.17 | buddah | yeah |
| 18:52.20 | Darwin35 | use and enjoy |
| 18:52.22 | buddah | i was hoping i'd have 1 line |
| 18:52.26 | buddah | that works for all users |
| 18:52.33 | Darwin35 | very easy to fallow well documented |
| 18:52.51 | Qwell | exten => 1[0-2][0-9],1,Voicemailmain(${EXTEN}@brf) |
| 18:52.59 | *** join/#asterisk rayvd (i=rayvd@arthur.bludgeon.org) |
| 18:53.00 | Qwell | try that. That'll work for 100-129 |
| 18:53.01 | buddah | nice |
| 18:53.05 | Qwell | hack it to your need |
| 18:53.39 | obsidian-studios | gnarf37: there has to be a better way to dial multiple sips, I mean having 10 or more in a dial is going to start getting a little unwieldy with all the &s? |
| 18:53.48 | rayvd | Any way to decrease the "volume" of the tones in indications.conf short of modifying the asterisk source code? |
| 18:53.54 | Darwin35 | yes use groups |
| 18:53.59 | rayvd | the busy tone is quite loud. |
| 18:54.16 | Darwin35 | add group=# to your extensions in sip.conf |
| 18:54.25 | PakiPenguin | can anyone help me with some h323 problem? |
| 18:54.33 | Darwin35 | learn about groups in the wiki |
| 18:54.39 | obsidian-studios | Darwin35: ok, just like with zap channels? |
| 18:54.44 | Darwin35 | yes |
| 18:55.16 | bassie | nivex: did you enter the _393 extension rules in your extensions.conf |
| 18:55.34 | bassie | if so, what does the 2nd _393 line read, iax2.fwdnet.net or iax.fwdnet.net |
| 18:55.41 | mjr^^ | has asterisk supporting h.323 got any bugs |
| 18:55.49 | *** join/#asterisk apardo (n=apardo@23.Red-83-44-179.pooles.rima-tde.net) |
| 18:55.55 | Darwin35 | yeah its called h323 |
| 18:56.05 | Darwin35 | or womera |
| 18:56.12 | PakiPenguin | hmms |
| 18:56.23 | *** join/#asterisk zamsler (n=zamsler@c-67-184-232-149.hsd1.il.comcast.net) |
| 18:56.29 | Tili | hi PakiPenguin |
| 18:56.30 | Darwin35 | if it aint IAX its a bug |
| 18:56.38 | bassie | lol |
| 18:56.38 | PakiPenguin | hey Tili |
| 18:56.49 | PakiPenguin | sorry couldnt call you guy , i forgot , will call him tomorrow morning for sure |
| 18:56.52 | zamsler | does anyone know what kinda card the TE110P is?? PCI or PCI-X??????? |
| 18:56.59 | zamsler | voipsupply doesn;t have a clue |
| 18:57.01 | zamsler | LOL |
| 18:57.08 | Nivex | bassie: I have a [fwdout] section in my iax2.conf and my extensions.conf has exten => _1393X.,2,Dial(IAX2/fwdout/${EXTEN:4}) |
| 18:57.16 | Rowter | for each rhino channel bank you need a T1 card? image you have 4 rhinos or you could connect them together? to one T1 rj45? |
| 18:57.17 | Nivex | (priorty 1 is a SetCID call) |
| 18:57.56 | Tili | PakiPenguin: i don't mind. but i would love to know what he said and wether you got the job or not. |
| 18:57.58 | brad_mssw | zamsler: sure looks like standard PCI to me |
| 18:58.11 | brad_mssw | zamsler: PCI-X would be larger |
| 18:58.13 | Rowter | zamsler, I have tested TDM04B on a pci-x and worked ok, I think TE110P should work ok, just check the voltage. |
| 18:58.17 | Darwin35 | I need to get a iaxtel nmbr and Ineed a 700 nmbr |
| 18:58.22 | bassie | nivex: you mean iax.conf |
| 18:58.29 | zamsler | I need it to work in PCI |
| 18:58.31 | bassie | or do you really have an iax2.conf? |
| 18:58.41 | Darwin35 | for iax you do |
| 18:58.46 | Nivex | bassie: yeah sry |
| 18:58.48 | Darwin35 | not iax2 |
| 18:58.53 | Darwin35 | just iax.conf |
| 18:58.54 | bassie | thankx |
| 18:58.58 | bassie | ok |
| 18:59.17 | bassie | weird then, should work since I followed all the steps outlined @ the fwd site |
| 18:59.41 | Darwin35 | at the cli do a iax2 show registry and show peers |
| 19:00.08 | bassie | Host Username Perceived Refresh State |
| 19:00.08 | bassie | 65.39.205.121:4569 701280 <Unregistered> 60 Rejected |
| 19:00.31 | Darwin35 | your not loged in so you cant make calls |
| 19:00.39 | bassie | darwin, makes sense. |
| 19:00.41 | bassie | :) |
| 19:00.55 | bassie | but how can I fix my registration problem |
| 19:01.02 | bassie | or troubleshoot it so to speak |
| 19:01.07 | Darwin35 | check your password and login name |
| 19:01.20 | Darwin35 | and then re read thier config page |
| 19:01.38 | Darwin35 | brb fone interview |
| 19:03.26 | Darwin35 | http://pastebin.ca/23129 hope you dont find it to anal rentenative |
| 19:08.12 | malverian[work] | I guess I could write an app that does it... |
| 19:10.12 | *** join/#asterisk |dennis| (i=dennis@200.32.215.84) |
| 19:11.45 | *** join/#asterisk oej (n=oej@apollo.webway.se) |
| 19:12.06 | *** join/#asterisk popvoxdave (i=user@dave2.toad.net) |
| 19:12.10 | *** part/#asterisk popvoxdave (i=user@dave2.toad.net) |
| 19:12.27 | Kernel-Kris | Darwin35, are you charging to help people today |
| 19:12.38 | spackle | anybody have the version of oh323 that ships with asterisk-addons working with a h323 phone? |
| 19:12.54 | bkw_ | well if you're here asking Darwin for help you're in major trouble. |
| 19:13.31 | Kernel-Kris | bkw_, why is that |
| 19:13.45 | file | so true, so true |
| 19:14.16 | spackle | bkw_ going to irc to give or get help is like being Don Quixote |
| 19:14.18 | Kernel-Kris | whats wront with Darwin35 |
| 19:14.54 | Kernel-Kris | well i need help is there anyone willing to help? |
| 19:16.12 | spackle | Kernel-Kris, ask a question about Asterisk |
| 19:16.19 | Corydon-w | Interesting how people ask if they can ask a question. |
| 19:16.31 | *** join/#asterisk r0d3nt (i=r0d3nt@tinfoilhat.net) |
| 19:16.54 | Kernel-Kris | spackle, its a lil more involved than that |
| 19:16.58 | Corydon-w | If you needed permission to ask a question, that would be quite a conundrum, wouldn't it? |
| 19:17.23 | Kernel-Kris | i have a dail plan that isnt working correctly and im able to dail in and get a demo menu but no internal extensions |
| 19:17.38 | Corydon-w | How do you ask for permission, if you aren't allowed to ask a question? |
| 19:17.54 | spackle | That describes a problem. It's a little better. |
| 19:18.02 | obsidian-studios | Corydon-w: raise your hand |
| 19:18.06 | spackle | Kernel-Kris: is this asterisk at home? |
| 19:18.10 | Mike_TK | Asking question and asking for permission is different things ;) |
| 19:18.22 | spackle | Kernel-Kris: do you know about contexts yet? |
| 19:19.33 | Kernel-Kris | Spacebar, no its not asterisk at home and yes i know about contexts |
| 19:19.45 | *** join/#asterisk generalhan (i=general_@ip67-90-64-2.z64-90-67.customer.algx.net) |
| 19:20.53 | Kernel-Kris | spackle, no its not asterisk at home and yes i know about contexts |
| 19:21.10 | Mike_TK | Kernel-Kris Than you probably should put your extensions in different context (default is ok, sometimes ;) ) and not include demo context there. |
| 19:21.24 | generalhan | can some one take a look at a WARNING message for me ? im really confused |
| 19:21.25 | generalhan | chan_iax2.c:6010 socket_read: Received mini frame before first full voice frame |
| 19:21.41 | spackle | Kernel-Kris: So you want to dial in, and be able to dial directly to an extension, or do you want a couple extensions to ring? |
| 19:23.41 | ender | when dialing an IAX2 channel to another asterisk box, can I specify what context to dial to? |
| 19:23.53 | ender | eg: Dial(IAX2/host/context/number) ? |
| 19:24.20 | *** join/#asterisk zotz (n=zotz@24.231.36.100) |
| 19:24.40 | bassie | can some fwd call me for a test @ 701280 |
| 19:25.07 | bassie | someone that is |
| 19:25.12 | bassie | :) |
| 19:26.00 | fugitivo | nothing |
| 19:26.04 | zzzirk | same here |
| 19:26.07 | bassie | hmm |
| 19:26.09 | Kernel-Kris | spackle, i have a TDM400p with one line in it currently........i want to be able to dial in get a menu and be able to dail out |
| 19:26.20 | bassie | strange, I can call 393-612 for test |
| 19:26.27 | bassie | but you can't reach me |
| 19:27.18 | Nugget | Kernel-Kris: ok, so do that. |
| 19:28.00 | zzzirk | I've got a TE110P card and I'm getting something funky when loading chan_zap.so... I've never used a PRI card and the error I'm getting is related to that (or appears to be): /usr/lib/asterisk/modules/chan_zap.so: undefined symbol: pri_suspend_acknowledge |
| 19:28.09 | zzzirk | anyone point me to what I'm doing wrong? |
| 19:28.26 | Qwell | zzzirk: got libpri installed? |
| 19:28.36 | zzzirk | and that was exactly what I was wondering |
| 19:28.38 | zzzirk | lemme check |
| 19:28.50 | fugitivo | USE="zaptel pri" emerge asterisk |
| 19:28.51 | fugitivo | :) |
| 19:28.58 | Qwell | a version which matches zaptel |
| 19:29.00 | Kernel-Kris | Nugget, thanks dick |
| 19:29.13 | zzzirk | fugitivo: doesn't work for me, I'm on debian, but thanks ;) |
| 19:29.31 | Qwell | eww, debian...source or package version of asterisk et al? |
| 19:29.43 | zzzirk | package, but I've built from source as well |
| 19:29.47 | zzzirk | although not on this box |
| 19:29.57 | Nugget | Kernel-Kris: at some point you're going to have to suck it up and learn how to edit the dialplan. |
| 19:30.03 | *** join/#asterisk MRH2 (n=Mr_happy@fcirc-adsl.demon.co.uk) |
| 19:30.04 | zzzirk | Qwell: yes, libpri is installed |
| 19:30.04 | Nugget | the sooner you do it, the better off you'll be. |
| 19:30.37 | Kernel-Kris | Nugget, i really apreciate all the help |
| 19:30.39 | Nugget | You're not asking for help, you're asking for us to do it for you. |
| 19:30.52 | Nugget | take some initiative. It's your system. |
| 19:30.53 | zzzirk | Did I maybe screw something up when I was compiling the kernel drivers? Or miss something maybe? |
| 19:31.15 | *** join/#asterisk ManxPower (n=eric@stirprop-s4-0-0-21.ndcr2.datasync.net) |
| 19:31.19 | Nugget | Your questions have all basically been nothing more than "hey, tell me what to type" |
| 19:31.25 | Nugget | that's not what we're here for |
| 19:31.30 | spackle | hi MaxPower |
| 19:31.38 | bassie | may I call someone on fwd |
| 19:31.39 | Qwell | Nugget: it is, if we're paid |
| 19:31.43 | MRH2 | is there any way to limit the number of available channels / calls to a sip provider, or define max bandwidth to a SIP Peer |
| 19:31.59 | Qwell | bassie: 527043 |
| 19:32.02 | Kernel-Kris | Nugget, i havent had a chance to ask a direct question........ass.......i was telling me conf |
| 19:32.13 | Qwell | eating though, don't expect me to talk much |
| 19:32.23 | bassie | qwell: here I come (I hope) |
| 19:32.25 | Nugget | calling me an ass and a dick isn't helping your cause any, either. :) |
| 19:32.32 | spackle | anybody have the version of oh323 that ships with asterisk-addons working with a h323 phone? |
| 19:32.48 | bassie | ringing |
| 19:32.58 | anthm | do people really buy these dcaps ? |
| 19:33.03 | Qwell | bassie: I got an error from fwd |
| 19:33.09 | bassie | hmm |
| 19:33.26 | Qwell | must be a problem on their end |
| 19:33.28 | bassie | really stupid this |
| 19:33.37 | bassie | I hear the ringing |
| 19:33.38 | bassie | but |
| 19:33.47 | bassie | registration keeps being rejected |
| 19:34.39 | bassie | qwell: thanks anyone. |
| 19:35.02 | bassie | anyway |
| 19:35.07 | bassie | well |
| 19:35.25 | bassie | top gear is on, suppose that'll be a better waste of time for now :) |
| 19:35.26 | *** join/#asterisk Pablo_C (n=captain@216.130.251.9) |
| 19:35.51 | bkw_ | Astricon is a total rip off :P |
| 19:36.05 | Nugget | heh |
| 19:36.09 | Pablo_C | anyone here had any luck getting a cisco 7970 running sip? |
| 19:36.11 | bkw_ | dCap is a rip off |
| 19:36.27 | spackle | cluecon = value |
| 19:36.49 | Qwell | Pablo_C: you can't (yet) |
| 19:36.56 | Qwell | there is no sip firmware (last I checked) for it |
| 19:37.09 | syzygyBSD | if there is a hangup during the execution of an agi script, how can i tell the script to continue? |
| 19:37.20 | Pablo_C | I heard they have it in the beta downloads but my login wont let me in to the beta section |
| 19:37.21 | Pablo_C | :\ |
| 19:37.31 | Pablo_C | anyone got beta access at cisco? <g> |
| 19:37.49 | Qwell | Pablo_C: licensed cco beta users do :p |
| 19:37.54 | spackle | shhhh They will hear you. |
| 19:38.02 | Pablo_C | hmmm |
| 19:38.26 | generalhan | can anyone tell me what this means ............ WARNING[2435]: chan_iax2.c:6010 socket_read: Received mini frame before first full voice frame |
| 19:38.37 | Pablo_C | qwell pm? |
| 19:38.56 | *** part/#asterisk azzie_ (n=az@azzie.net) |
| 19:39.12 | spackle | generalhan, well it means there was a little bit before it all came rolling in. |
| 19:39.23 | wunderkin | does anyone know where the explanations of g/G/r/R are for zaptel? |
| 19:39.24 | kg | generalhan: nothing important, probably a peer is a bit lagged |
| 19:39.25 | generalhan | ok but no major issues or concerns with that |
| 19:40.35 | syzygyBSD | wunderkin: http://www.voip-info.org/tiki-index.php?page=Asterisk+Zap+channels |
| 19:41.33 | Qwell | no |
| 19:41.45 | wunderkin | syzygyBSD, ah thanks |
| 19:41.58 | Qwell | .. |
| 19:42.41 | syzygyBSD | me on the other hand has to deal with an additional agi script without all the information because asterisk kills an executing agi if there is a hangup |
| 19:43.09 | Juggie | syzygyBSD, it never used to :( but you can trap the sighup and ignore it |
| 19:43.36 | syzygyBSD | ya, or i could just write another one to be run on hangup... |
| 19:43.38 | wunderkin | aha, i found the problem.. i still have another active channel ;/ |
| 19:44.15 | wunderkin | dumdumdum |
| 19:45.18 | Juggie | syzygyBSD, yah, but thats a hassle :) |
| 19:45.30 | syzygyBSD | it's not too bad |
| 19:45.41 | Juggie | my scripts detected hangup in the script and then cleaned up |
| 19:45.42 | Juggie | which was nice |
| 19:45.46 | Juggie | but they are in php |
| 19:45.58 | syzygyBSD | mine is in python |
| 19:45.58 | Juggie | so i have to recompile php with thread management before i can ignore sighup |
| 19:47.09 | Pablo_C | Qwell, I have a cco and can login to cisco... but where is the beta stuff?? |
| 19:47.10 | Juggie | someone needs to develop a * modem emulator |
| 19:47.13 | Juggie | that would be cool |
| 19:47.22 | syzygyBSD | lol |
| 19:47.50 | JerJer | Juggie: SpanDSP |
| 19:47.52 | JerJer | go for it |
| 19:49.06 | znoG | what do you guys recommend as a 16-24port FXS SIP/IAX solution? (rack mountable) |
| 19:49.23 | znoG | reasonably priced :) |
| 19:49.56 | fugitivo | audiocodes |
| 19:50.02 | zzzirk | Okay, this may sound stupid, but I've never dealt with a PRI interface before... how can I tell if the telco guy hooked it up right? It's a TE110P card and they claim to have plugged it into a switch but I can't call out now that I've got everything configured. |
| 19:50.29 | fugitivo | is the light on? |
| 19:50.33 | zzzirk | oh, and it's set to PRI mode, and I finally figured out why chan_zap.so was having trouble |
| 19:50.36 | Qwell | zzzirk: You'll never be able to prove they did it wrong. If they did, they'll fix it, and never explain what the problem was |
| 19:50.46 | zzzirk | ah, lovely |
| 19:50.47 | syzygyBSD | do you get shocked when you lick the wires? |
| 19:50.58 | zzzirk | and since it's a weekend no one is there to help me and I'm stuck til mondya |
| 19:51.00 | zzzirk | lovely |
| 19:52.04 | *** join/#asterisk bjohnson (n=bjohnson@jecinc.tor.istop.com) |
| 19:52.31 | *** join/#asterisk zotz (n=zotz@24.231.36.100) |
| 19:54.34 | *** join/#asterisk astnoob (n=astnoob@static-209-137-161-171.t1.cavtel.net) |
| 19:56.36 | znoG | anyone? |
| 19:56.48 | astnoob | <PROTECTED> |
| 19:56.48 | astnoob | error: dereferencing pointer to incomplete type |
| 19:56.48 | astnoob | Looking through the log everything seems to stem from this: |
| 19:56.48 | astnoob | make[1]: Entering directory `/usr/src/kernel-headers-2.6.8-2-386' |
| 19:56.49 | astnoob | <PROTECTED> |
| 19:56.51 | astnoob | in file included from /usr/src/zaptel/zaptel.c:40: |
| 19:57.47 | fugitivo | znoG: audiocodes |
| 19:57.55 | astnoob | <PROTECTED> |
| 19:58.46 | znoG | fugitivo: ah sorry, didn't see that. Thanks |
| 19:58.51 | znoG | fugitivo: are they expensive for a 24 port? |
| 19:59.16 | fugitivo | what is expensive for you? |
| 19:59.41 | fugitivo | you can get one for $1500 or less |
| 20:01.05 | znoG | well i can probably do with 8 x 2 port sipuras instead |
| 20:01.20 | znoG | for 16 lines |
| 20:01.38 | doughecka_ | Why would caller id name not be passed to my phones? Is there a zap option I can change to allow it? |
| 20:02.25 | fugitivo | doughecka_: caller id comming from where? |
| 20:02.32 | FuriousGeorge | this was just working yesterday, now when i call out via iax (nufone) im told the call was rejected b/c there is no such context/extension, but every nufone entry has a corresponding context= line which in turn corresponds to a context in extension |
| 20:02.35 | doughecka_ | oh, a PRI |
| 20:02.44 | doughecka_ | PRI -> asterisk -> sip phones |
| 20:02.45 | mutilator | ast_freak: ya using HEAD or stable? |
| 20:02.46 | mutilator | er |
| 20:02.47 | mutilator | astnoob |
| 20:03.09 | shido6 | the peer doesnt need a context for NuFone |
| 20:03.21 | FuriousGeorge | hmm |
| 20:03.37 | fugitivo | znoG: you can do 12x2=24 port pap2-na for $840, but then you have to administer all the devices, a pain in the ass |
| 20:03.38 | astnoob | <PROTECTED> |
| 20:04.17 | doughecka_ | fugitivo: you can get a t1 card and a adtran channel bank, which also gives you some FXO ports |
| 20:04.18 | mutilator | did ya do cvs checkout asterisk or cvs checkour -r v1 |
| 20:04.28 | astnoob | <PROTECTED> |
| 20:04.32 | mutilator | try gettin table |
| 20:04.34 | mutilator | stable* |
| 20:04.37 | astnoob | k thanks :) |
| 20:04.38 | FuriousGeorge | shido6: i took it out, but Sep 16 12:02:24 WARNING[11145]: chan_iax2.c:5553 socket_read: Call rejected by 198.22.67.70: No such context/extension |
| 20:04.40 | fugitivo | doughecka_: that's much more expensive |
| 20:04.59 | doughecka_ | only a couple hundred |
| 20:05.00 | FuriousGeorge | and im sure the rest of the contexts= correspond to extensions.conf |
| 20:05.29 | doughecka_ | I can get an adtran for maybe $400 or so :) |
| 20:05.37 | mutilator | O_o |
| 20:05.46 | mutilator | a 24port bank? |
| 20:05.48 | fugitivo | doughecka_: i think that the audiocodes with 24fxs is the best option |
| 20:06.02 | mutilator | ours was like 1200 |
| 20:06.06 | zzzirk | okay, within the asterisk console if I type 'pri show span 1' it shows my PRI as "provisioned, up, active" does that tell my my T1 is actually connected, or is that just internal asterisk status? |
| 20:06.07 | mutilator | were |
| 20:06.10 | fugitivo | mutilator: which one? |
| 20:06.13 | shido6 | pastebin.ca |
| 20:06.17 | *** join/#asterisk zeedo (n=zeedo@www.reboot-robot.net) |
| 20:06.20 | mutilator | ta652 |
| 20:06.24 | shido6 | refer to the diretives FuriousGeorge |
| 20:06.29 | shido6 | directives |
| 20:06.35 | doughecka_ | fugitivo: oh? |
| 20:06.36 | shido6 | or send me a pastebin |
| 20:06.38 | doughecka_ | how much is that? |
| 20:06.48 | FuriousGeorge | one sec |
| 20:07.05 | wunderkin | zzzirk: yeah its up |
| 20:07.06 | fugitivo | doughecka_: i don't know exactly, but it's 1500 or less, i'm sure is cheaper that that |
| 20:07.12 | doughecka_ | ah |
| 20:08.02 | mutilator | er |
| 20:08.05 | mutilator | ta624 |
| 20:08.06 | mutilator | meh |
| 20:08.54 | fugitivo | meou |
| 20:09.21 | mutilator | froogling it's like $1100 minimum for that |
| 20:09.32 | fugitivo | well, i was close |
| 20:09.48 | spackle | adtran 850 |
| 20:10.21 | bjohnson | you can get used channel banks on ebay |
| 20:10.31 | bjohnson | many people have had luck with that |
| 20:10.45 | fugitivo | you can't have luck with a costumer :) |
| 20:10.45 | doughecka_ | adtran 624 |
| 20:10.48 | doughecka_ | works pretty good |
| 20:10.57 | mutilator | ya |
| 20:10.58 | bjohnson | loosely speaking, 24 channels for $1000 including digium t! card |
| 20:11.00 | spackle | I wouldn't buy another used one now, I can get 3 for the price of one new one. |
| 20:11.01 | ManxPower | Adtran TA 750 and 850 are great |
| 20:11.07 | doughecka_ | used at a client, but I had bad server hardware, causing echo |
| 20:11.11 | spackle | I wouldn't buy another used one now, I can get 3 for the price of one new one.er, new one |
| 20:11.11 | mutilator | we've got like.. 5 624's deployed |
| 20:11.32 | bjohnson | spackle: yeah. I hate getting 3 for the price of one too |
| 20:11.32 | spackle | Maxpower are you using any h323? |
| 20:11.34 | doughecka_ | mutilator: work good? callerid/stuff like that |
| 20:11.39 | mutilator | yea, work great |
| 20:11.39 | bjohnson | spackle: what are you trying to say? |
| 20:11.42 | doughecka_ | cool |
| 20:11.48 | CoffeeIV_ | How do I find the documentation on an asterisk function called from within the .confs, like "Monitor()" ? "help monitor" at the *CLI> didn't do it |
| 20:11.52 | fugitivo | i hate getting one for the price of 3 |
| 20:11.56 | spackle | Man, typing, take two. |
| 20:12.17 | fugitivo | ~docs |
| 20:12.20 | jbot | rumour has it, docs is Documentation can be found at http://www.digium.com/index.php?menu=documentation or http://www.digium.com/handbook-draft.pdf or http://www.voip-info.org/wiki-Asterisk or http://www.asteriskdocs.org or http://www.oreilly.com/catalog/asterisk |
| 20:12.28 | FuriousGeorge | shido6: http://pastebin.ca/23136 <--- i swear it was working yesterday |
| 20:12.30 | spackle | If I get a new one, it's 1200, I can get three adtrans off ebay for $400, I'll never buy another new one again. |
| 20:12.35 | doughecka_ | still dont get calleridname |
| 20:12.37 | doughecka_ | on my pri |
| 20:12.41 | doughecka_ | what option would be turned off |
| 20:12.46 | *** join/#asterisk atmel (n=vlad@cpe-66-91-254-53.san.res.rr.com) |
| 20:13.58 | spackle | in short, buy used, get a backup, it still costs less. |
| 20:14.06 | CoffeeIV_ | thanks for the links to the docs, but I seem to remember that those functions were also documented in a place "built in" to asterisk, so that you wouldn't find documentation for the latest version on the web while you were using an older version |
| 20:15.01 | bjohnson | the savings in channel bank vs multiple pap2s is the administration time. upfront hardware cost is about the same. |
| 20:15.11 | bjohnson | cb becomes cheaper if talking fxos |
| 20:15.49 | fugitivo | is any solution for 12 fxo? |
| 20:16.08 | fugitivo | any fxo gateway? |
| 20:16.36 | wunderkin | doughecka_: i havent really been following but make sure that the name is being sent (theres some kind of zap debug for that) and you may need a wait in before you dial the phone |
| 20:16.56 | doughecka_ | its got lots of waits in there allready |
| 20:17.07 | doughecka_ | and it was being sent before, but something changed in the config and now its not |
| 20:17.19 | wunderkin | i dunno im just learning, but first i would think you would want to turn on the debug to make sure its even being sent |
| 20:17.37 | wunderkin | thats all i can say about it :D |
| 20:17.47 | fugitivo | dougchecka_: usecallerid=yes hidecallerid=no callwaitingcallerid=yes |
| 20:17.49 | doughecka_ | :)) |
| 20:18.07 | fugitivo | dougchecka_: callerid=asreceived |
| 20:18.24 | doughecka_ | cool |
| 20:18.56 | doughecka_ | would the switchtype matter? |
| 20:19.54 | doughecka_ | meh, still nothing |
| 20:20.57 | *** join/#asterisk Inv_arp (i=junya@adsl-11-73-185.mia.bellsouth.net) |
| 20:21.13 | *** join/#asterisk gambolputty (n=gambolpu@72.240.241.108) |
| 20:21.55 | bjohnson | fugitivo: the adit cbs will take fxo |
| 20:22.08 | bjohnson | fugitivo: there ARE fxo gateways but they are $$$$$ |
| 20:22.30 | CoffeeIV_ | In the file res_monitor.c, there is a static char* describing how to use the Monitor() function, which is defined in that file. How can I make * print out that static char*, so I can look at the docs for * commands while writing .conf's just like I use man to look at the docs for C functions when I am programming ? |
| 20:22.39 | doughecka_ | the adtran 624 has 16 FXS and 8 FXO |
| 20:22.46 | fugitivo | bjohnson: for example? |
| 20:23.22 | fugitivo | if i need 12fxs, do i use 4 tdm400p with 4 fxo modules? :) |
| 20:23.41 | mutilator | i use 24fxs on my 624's |
| 20:23.42 | doughecka_ | fugitivo: nooo |
| 20:23.42 | bjohnson | fugitivo: I don't have any gateway examples. They were too expensive for me to even remember brand names |
| 20:23.59 | doughecka_ | fugitivo |
| 20:24.11 | doughecka_ | yay |
| 20:25.51 | doughecka_ | hmm |
| 20:26.04 | doughecka_ | names might have been coming in on the old analog lines |
| 20:26.10 | doughecka_ | not sure if we got name ever on the pri |
| 20:28.05 | jarrod | the adtran is bunk |
| 20:28.18 | fugitivo | how much is the adtran? |
| 20:29.56 | jarrod | its not worth it |
| 20:29.58 | jarrod | go carrier access |
| 20:30.03 | jarrod | they have so many bugs with their MGCP code |
| 20:30.10 | jarrod | (adtran) |
| 20:30.30 | doughecka_ | no voip crap for me :) |
| 20:31.06 | jarrod | oh |
| 20:31.09 | jarrod | then adtrans are great |
| 20:31.10 | doughecka_ | but does the 624 support voip? |
| 20:31.30 | jarrod | the 3rd gens have MGCP code |
| 20:31.40 | jarrod | but its so buggy its unusable |
| 20:32.27 | fugitivo | well, if you need 12 fxo for an asterisk box, what do you choose? |
| 20:33.17 | FuriousGeorge | channe; bank? |
| 20:33.24 | jarrod | CARRIER ACCESS |
| 20:33.29 | jarrod | they frickin rock |
| 20:34.01 | syzygyBSD | what is the sampling rate of raw files? |
| 20:34.39 | fugitivo | no more options? |
| 20:34.46 | jarrod | anyone built high availability ser deployment where multiple proxies share same registration info |
| 20:35.00 | jarrod | fugitivo dont need any outside CAC |
| 20:38.25 | *** join/#asterisk Kernel-Kris (n=Kris@lfkn-fw.angelinacounty.net) |
| 20:39.17 | apeman | fugitivo: I'm using a MultiTech MVP2410 24 Channels FXO, PRI interface. It was really expensive, over $4000.00 I would have liked to just use an digium t1 card. |
| 20:39.39 | Rowter | fugitivo, I had a similar config and set 3 tdm04b |
| 20:39.51 | fugitivo | Rowter: how does it work? |
| 20:40.44 | Rowter | fugitivo, this was a week ago, so I can't tell exactly, but had been ok till now.. they are using each line and receiving. |
| 20:41.10 | fugitivo | no irq problems? |
| 20:41.14 | Rowter | nop |
| 20:41.49 | doughecka_ | jarrod: can I upgrade any 624 to gen3? |
| 20:41.49 | Rowter | fugitivo, where are you from? |
| 20:42.15 | fugitivo | argentina |
| 20:42.22 | Rowter | ohh I see :) |
| 20:42.58 | Rowter | I have a bigger config now, 110 FXS and 32 FXo, am wondering about using rhino channel banks for FXS and FX0.. |
| 20:43.14 | Rowter | with a TE400P |
| 20:43.36 | *** join/#asterisk djin_ib (n=djin_ib@gridfox.xs4all.nl) |
| 20:43.39 | Rowter | for each rhino I need a E1 slot no? thats my wondering |
| 20:44.43 | djin_ib | Does "chan_zap.c:4162 zt_write: Cannot handle frames in 2 format" seem familiar to anyone ?!? |
| 20:44.59 | bjohnson | fugitivo: do you need expandability? |
| 20:45.10 | spackle | Jarrod, what model of channel bank do you use? |
| 20:45.25 | djin_ib | Trying to forward a incoming fax through fac detection (exten => fax,1,etc. ) |
| 20:45.27 | fugitivo | bjohnson: no, just 12 fxo |
| 20:45.36 | doughecka_ | ooh, I have gen 3 |
| 20:45.40 | doughecka_ | do I need a firmware upgrade? |
| 20:45.43 | bjohnson | fugitivo: then you have 3 good options |
| 20:45.59 | bjohnson | fugitivo: cb, atas, or digium pci cards |
| 20:46.15 | bjohnson | fugitivo: I'd go mixture of atas and pci |
| 20:46.22 | fugitivo | bjohnson: spa? |
| 20:46.36 | bjohnson | I like the dlink/sipuras |
| 20:46.44 | jarrod | spackle: adit 600 |
| 20:46.56 | bjohnson | they are one of the cheapest but still good product |
| 20:46.59 | fugitivo | what about 3 tdm400p with fxo modules? |
| 20:47.07 | spackle | Jarrod: and you are happy with the mgcp support in *? |
| 20:47.20 | jarrod | spackle: YES with the CAC |
| 20:47.23 | jarrod | we've deployed many |
| 20:47.26 | fugitivo | Kteatime is great |
| 20:47.27 | bjohnson | fugitivo: you said you need 12 fxs |
| 20:47.27 | jarrod | but adtran is BUGGY |
| 20:47.36 | bjohnson | fugitivo: now you say you need fxo? |
| 20:47.40 | jarrod | and the adit 600s will support 2 t1s |
| 20:47.43 | fugitivo | bjohnson: did i say that? |
| 20:47.48 | bjohnson | yes |
| 20:47.51 | fugitivo | <fugitivo> bjohnson: no, just 12 fxo |
| 20:47.59 | bjohnson | crap |
| 20:48.04 | fugitivo | lol |
| 20:48.07 | bjohnson | then cb |
| 20:48.11 | znoG | fugitivo: do you know any provider of Audiocodecs products? i want to find some pricing without having a sales guy after me |
| 20:48.15 | bjohnson | unless you want 12 spa 3000s |
| 20:48.24 | fugitivo | znoG: only in argentina |
| 20:48.30 | bjohnson | fugitivo: I thought you started by talking about pap2 |
| 20:48.31 | bjohnson | fugitivo: I thought you started by talking about pap2s |
| 20:48.34 | znoG | fugitivo: thats where I am |
| 20:48.45 | fugitivo | really? |
| 20:48.49 | znoG | fugitivo: yup |
| 20:49.00 | znoG | fugitivo: posta :) |
| 20:49.21 | bjohnson | jarrod: so CARRIER ACCESS don't need a T1 interface to *? |
| 20:49.31 | syzygyBSD | does anyone know all the encoding for the raw files ? |
| 20:49.54 | znoG | fugitivo: commlogik? |
| 20:49.58 | jarrod | bjohnson: no |
| 20:50.05 | jarrod | it would run over MGCP |
| 20:50.11 | bjohnson | jarrod: via cat5? |
| 20:50.19 | jarrod | over ethernet |
| 20:50.31 | jarrod | IP |
| 20:50.38 | bjohnson | well that would save $500 on a cb solution |
| 20:50.52 | jarrod | the CMG card costs more than that |
| 20:50.53 | jarrod | hah |
| 20:51.31 | spackle | I like it. |
| 20:52.41 | znoG | fugitivo: es commlogik? |
| 20:54.49 | fugitivo | znoG: yes, commlogik |
| 20:56.00 | znoG | fugitivo: thanks |
| 21:02.33 | smcmahon | Anyone know -of- a website that has the definition of the various ANI codes? |
| 21:05.32 | Inv_arp | smcmahon: googled? |
| 21:06.50 | *** join/#asterisk stkn (i=nobody@gentoo/developer/pdpc.active.stkn) |
| 21:09.53 | syzygyBSD | where is a good place for me to leave information that i found out like the sampling/encoding of raw files? |
| 21:10.07 | spackle | how can I name my monitored conference recordings as conf_datetime? |
| 21:10.54 | jarrod | is there a way to specify a remote voicemail server? |
| 21:10.59 | spackle | syzygyBSD: you mean for others to reference? On the wiki: |
| 21:11.02 | spackle | ~wiki |
| 21:11.09 | jarrod | VoicemailMain() is sent to a 'voicemail server' |
| 21:11.13 | syzygyBSD | ya, creating an account so i can |
| 21:11.16 | jarrod | another asterisk box |
| 21:11.34 | spackle | syzygyBSD: excellent. |
| 21:12.26 | spackle | jarrod: can you send them to an extension that does voicemailmain() on the remote server? |
| 21:12.53 | malverian[work] | jarrod, Dial(IAX/vmailserver) |
| 21:13.37 | jarrod | how would that route per individual vmail boxes for many different contexts? |
| 21:13.55 | spackle | Monitor(wav,/var/spool/asterisk/monitor/conf${datetime},m) I'm trying to concatenate conf+timestamp to name the file but it doesn't work like this. Anybody know how? |
| 21:14.54 | smcmahon | Anyone know how to perform a caller id lookup online? |
| 21:14.59 | spackle | name the vmailservers differently according to the contexts? |
| 21:15.19 | spackle | smcmahon, you mean like during an asterisk call? |
| 21:16.00 | smcmahon | No No, Is thier some kind of online website that you could type someone's phone number in and display the CID ? |
| 21:16.17 | spackle | google does some reverse lookups |
| 21:16.31 | smcmahon | Yeah I was loooking for something more sofisticated |
| 21:16.42 | spackle | lots of privacy issues. |
| 21:16.47 | syzygyBSD | spackle: how can i add a page to the wiki? http://voip-info.org/tiki-index.php?page=Asterisk+cmd+Dictate isn't there and should be |
| 21:17.11 | smcmahon | What does Asterisk CMD Dictate do syzygyBSD |
| 21:17.37 | PakiPenguin | guys , i am trying to send a call to an ip that need a user/pass to accept the call , but i am getting errors , can someone help me out please, here's the detail http://pastebin.ca/23143 |
| 21:17.59 | syzygyBSD | it allows you to "dictate" a file. has built in methods to go forward/back review record, truncate |
| 21:18.14 | smcmahon | Does it use festival? |
| 21:18.17 | syzygyBSD | I just submitted a patch to allow a filename to be passed as well, so it doesn't have to be entered by the user |
| 21:18.22 | spackle | syzygyBSD: did you enclose it like this [my page] IIRC that's how it's done. |
| 21:18.38 | *** join/#asterisk lesouvage (n=lesouvag@cc341200-a.assen1.dr.home.nl) |
| 21:19.29 | spackle | syzygyBSD: I just updated to recent CVS today, I need to try app_dictate. |
| 21:19.32 | smcmahon | syzygyBSD: Does it use festival |
| 21:19.55 | syzygyBSD | smcmahon: no, it is the other way of dictating, ie the caller dictates something |
| 21:20.17 | *** join/#asterisk dalabera (n=Dalabera@pmr.pmrtechnologies.com) |
| 21:20.20 | smcmahon | Interesting. Hope to see details about this some day |
| 21:20.58 | spackle | syzygyBSD: what page are you starting from to add yours? |
| 21:21.10 | lesouvage | is increasing the memory (from 256 mb to 512 mb ) a good idea if I want to improve performance of an asterisk box or can I better spend my money on a faster motherboard and keep the same memory? |
| 21:21.22 | syzygyBSD | spackle: http://voip-info.org/tiki-index.php?page=Asterisk+cmd+Dictate |
| 21:21.26 | syzygyBSD | http://voip-info.org/tiki-index.php?page=Asterisk+-+documentation+of+application+commands |
| 21:21.28 | syzygyBSD | i mean |
| 21:21.35 | spackle | lesouvage, is the memory maxed out? |
| 21:21.36 | fugitivo | lesouvage: does your asterisk use more cpu or memory? |
| 21:21.39 | smcmahon | lesouvage: Asterisk will always bottleneck somewhere else |
| 21:22.27 | lesouvage | spackle: what do you mean with maxed out, I can add 1 gb max but that's kind of expensive. |
| 21:22.33 | spackle | lesouvage: As a blanket statement I would say better mobo. |
| 21:22.51 | smcmahon | Woo Hoo my neighbors house caught fire, Gotta move my dome cameras outside to capture this online :) |
| 21:22.57 | spackle | lesouvage, No, I mean is there any free (in top or free) |
| 21:23.14 | fugitivo | smcmahon: url |
| 21:23.28 | jarrod | hmm |
| 21:23.30 | syzygyBSD | smcmahon: you didn't start it did you? |
| 21:23.38 | smcmahon | LOL ME? Nooo Not me |
| 21:23.49 | jarrod | what if you have multiple asterisk servers and you need to keep a good centralized CDR |
| 21:23.57 | smcmahon | I dont have a grudge aginst hispanics. They were probally burning thier shit paper in thier fireplace again |
| 21:23.58 | jarrod | and you dont want double records |
| 21:24.00 | lesouvage | speackle: When the box is on for days it tends to use more then 200 mb of the 256 available. |
| 21:24.26 | spackle | jarrod, send all your CDRs to one database. |
| 21:24.34 | jarrod | what about double logging? |
| 21:24.41 | lesouvage | fugitivo: I have never saw the box really cramble. Even when I raised the cpu load to 100 with converting mp3 asterisk could handle an incoming call. |
| 21:24.43 | smcmahon | My asterisk box has 2 XEON Processors at 2.4 GHZ 3 GB of Memory, 6 SCSI Drives (Hot Swappable) of course |
| 21:24.53 | jarrod | like call from one server (feature server) to a gateway server |
| 21:24.57 | fugitivo | lesouvage: is it doing transcoding? |
| 21:24.58 | *** join/#asterisk s34n (n=chatzill@ip-206-159-190-125.mvdsl.com) |
| 21:24.59 | jarrod | gets logged twice |
| 21:25.04 | jarrod | to same CDR? |
| 21:25.05 | spackle | lesouvage, That's normal behavior for linux. I'd say if you are having problems look elsewhere. |
| 21:25.21 | s34n | what's a decent soft phone for Gnome in Linux? |
| 21:25.30 | spackle | jarrod, Keep you time well synched and just clean them out with a query |
| 21:25.30 | Qwell | s34n: sip or iax? |
| 21:25.33 | s34n | sip |
| 21:25.36 | *** join/#asterisk Ariel_ (n=Ariel@dsl-20-177.cofs.net) |
| 21:25.41 | Qwell | no clue |
| 21:25.42 | lesouvage | spackle: I don't have problems, I was looking for advice. The box is running fine. |
| 21:25.51 | s34n | Qwell: how about iax? |
| 21:25.52 | fugitivo | s34n: there're no decent, but try gnophone |
| 21:25.55 | smcmahon | all this sip-in makes me wanna go get some pepsi |
| 21:26.05 | fugitivo | s34n: or xlite |
| 21:26.30 | spackle | lesouvage, get a good motherboard with good pci support then. |
| 21:26.31 | Qwell | iaxcomm |
| 21:27.19 | malverian[work] | s34n, linphone works well for me. |
| 21:27.21 | lesouvage | fugitivo: what do you mean with transcoding (sorry English is not my native language so sometimes I miss something) |
| 21:27.36 | malverian[work] | s34n, The interface is a bit dumb, but it works well. |
| 21:27.45 | *** join/#asterisk CrazyYoss (n=nobody@adsl-69-236-44-222.dsl.pltn13.pacbell.net) |
| 21:27.57 | smcmahon | fugitivo: what is your native language? |
| 21:28.19 | *** join/#asterisk wacky_ (n=wacky@modemcable006.177-201-24.mc.videotron.ca) |
| 21:28.48 | fugitivo | mandarin |
| 21:29.12 | wacky_ | is it possible to switch codecs in the middle of a call ? let's say you issue a Dial() command and the remote client handles a bit more codecs, could the communication switch codec at that moment ? |
| 21:29.30 | CrazyYoss | Ive got a quick question, I want to setup a system where multiple clients can call up and record a message. Ive checked out the asterisk feature list and its pretty comprehensive. Would it be overkill to use asterisk for something like this? |
| 21:29.45 | smcmahon | fugitivo never herd of that one before |
| 21:29.53 | malverian[work] | jarrod, You could do a dial macro.. |
| 21:30.25 | wacky_ | in fact, I have point 'B' (outside PSTN), the '*' server, and point 'S' (a user) |
| 21:30.26 | malverian[work] | jarrod, Dial(VMAILSERVER/whatever,,M(dovmail^${CALLERIDNUM})) |
| 21:31.12 | jarrod | now theres a good idea |
| 21:31.21 | *** join/#asterisk f0urtyfive (n=noone@pcp0010984341pcs.ivylnd01.pa.comcast.net) |
| 21:31.24 | spackle | smcmahon - mandarin - Chineese. |
| 21:31.26 | malverian[work] | And then have a macro "dovmail" that does a VoiceMailMain(${ARG1}) |
| 21:31.31 | wacky_ | id's like: B->* to be 'ulaw' while playing the initial message, but after entering the ext., I'd like B->S to use g729 (since Asterisk doesn't speak g729 here) |
| 21:31.41 | f0urtyfive | Anyone know a good place to get US termination? |
| 21:32.02 | wacky_ | sorry, s/id's/I'd |
| 21:32.04 | fugitivo | wacky_: that's transcoding |
| 21:32.20 | wacky_ | fugitivo - well, both B and S speak g729, only Asterisk doesn't |
| 21:32.25 | spackle | crazyYoss, no Asterisk would be good for that application |
| 21:32.35 | wacky_ | and Asterisk should just bridge the call, and not matter what is passed around, shouldn't it ? |
| 21:33.17 | wacky_ | and even, Asterisk is said to pass-thru g729 |
| 21:33.19 | malverian[work] | spackle, I think he was asking if there was a less robust system he could use for that limited need he has. |
| 21:33.36 | smcmahon | I really dont like G.729 |
| 21:33.49 | wacky_ | what about g711u ? |
| 21:33.58 | smcmahon | 711 Ulaw is fine |
| 21:34.22 | malverian[work] | What's bandwidth difference between 729 and 711? |
| 21:34.53 | fugitivo | 8kbps and 64kbps |
| 21:35.05 | s34n | fugitivo: gnophone looks inactive since 2001 |
| 21:35.15 | brad_mssw | malverian[work]: http://www.voip-info.org/tiki-index.php?page=Bandwidth%20consumption |
| 21:35.17 | fugitivo | really? |
| 21:35.20 | s34n | fugitivo: I didn't realize xlite had a linux version |
| 21:35.21 | brad_mssw | 711 is uncompressed |
| 21:35.34 | fugitivo | s34n: yes, it's like 2 months old |
| 21:35.43 | *** join/#asterisk doughecka_ (n=Miranda@unaffiliated/doughecka) |
| 21:36.04 | Katty | is it time to go home yet? |
| 21:36.15 | smcmahon | G.723.1 6.4 Kbps 21.9 Kbps |
| 21:36.22 | fugitivo | Katty: did you finish your work? |
| 21:36.30 | Katty | fugitivo: hours ago. |
| 21:36.34 | Katty | Hmm-home: mew? |
| 21:36.59 | smcmahon | Codec BR NEB |
| 21:36.59 | smcmahon | <PROTECTED> |
| 21:36.59 | smcmahon | <PROTECTED> |
| 21:36.59 | smcmahon | <PROTECTED> |
| 21:36.59 | smcmahon | <PROTECTED> |
| 21:37.00 | smcmahon | <PROTECTED> |
| 21:37.02 | smcmahon | <PROTECTED> |
| 21:37.04 | smcmahon | <PROTECTED> |
| 21:37.06 | smcmahon | <PROTECTED> |
| 21:37.06 | Katty | smcmahon: yikes. |
| 21:37.14 | *** join/#asterisk Nebukadneza (n=daddel9@i3ED6E8F4.versanet.de) |
| 21:37.15 | Katty | smcmahon: :< |
| 21:37.15 | Nebukadneza | hi |
| 21:37.17 | smcmahon | OKay looking at this... What is G723.1 ? |
| 21:37.25 | Katty | smcmahon: pastebin nexttime, plskthx. |
| 21:37.30 | fugitivo | another licensed codec |
| 21:37.36 | Nebukadneza | is it possible to crypt isdn/zaptel calls with asterisk? |
| 21:37.50 | smcmahon | Okay I've never seen anything further about this in asterisk development |
| 21:37.56 | smcmahon | Sicks my dog on KATTY |
| 21:38.05 | wacky_ | 711 can run at 8000 also.. |
| 21:38.17 | wacky_ | that's what is suggested in the SIP packets |
| 21:38.48 | PakiPenguin | :p |
| 21:38.50 | wacky_ | is there a way to troubleshoot native-bridging ? |
| 21:39.01 | Katty | smcmahon: dude, shut up. |
| 21:39.24 | Katty | smcmahon: unless you're really just wanting to be smacked upside the head with a unix manual. |
| 21:39.37 | fugitivo | !! |
| 21:39.42 | fugitivo | sendmail manual! |
| 21:39.46 | smcmahon | Katty: If you can catch me |
| 21:39.53 | Katty | smcmahon: k |
| 21:40.20 | f0urtyfive | Hey has anyone in here used H323 with asterisk before? |
| 21:40.29 | smcmahon | H323 sucks |
| 21:41.30 | spackle | Fourtyfive, I was just asking about it a little bit ago, what is your issue? |
| 21:41.45 | wacky_ | why would native bridging fail ? and also, is * supposed to print something in the console when it bridges successfully ? |
| 21:42.05 | f0urtyfive | spackle: I was just wondering, because XO just installed a T1 that has a Cisco router that does H323 on 5 lines at my dad's office, was wondering if I could call into it from asterisk and have it ring their phones... |
| 21:43.27 | spackle | Fourtyfive, Asterisk can certainly call h.323. Don't you think the h.323 is just for XO though? |
| 21:43.40 | CrazyYoss | spackle: what kind of hardware would I need to be able to handle multiple calls at once? |
| 21:43.55 | f0urtyfive | spackle: I would assume so, but if I can call them via h323 instead of through the pstn, I'd like to, its a lot cheaper for me to call over a voip protocal :P |
| 21:44.10 | Inv_arp | CrazyYoss: how many calls? |
| 21:44.15 | f0urtyfive | spackle: The h323 port is open on the router, so I would assume... |
| 21:44.23 | spackle | CrazyYoss, probably a T1 Card, or a provider that could send calls to you over IP. |
| 21:44.23 | Katty | smcmahon: (= |
| 21:44.23 | fugitivo | smcmahon: for example? |
| 21:44.44 | f0urtyfive | spackle: It would also be nice if I could call into their h323 capable router, and then use that for outgoing calls, as they have 100,000 "free" minutes per month |
| 21:44.45 | Katty | smcmahon: grow curves, for example. |
| 21:44.51 | CrazyYoss | Inv_arp: lets say can handle around 10-15 calls at the same time |
| 21:44.52 | spackle | CrazyYoss, how many calls do you anticipate getting at once? |
| 21:45.29 | Inv_arp | CrazyYoss: bah any decent pc |
| 21:45.56 | spackle | brb |
| 21:45.59 | syzygyBSD | can someone take a look at http://voip-info.org/tiki-index.php?page=Asterisk+cmd+Dictate and tell me if i left anything important out? |
| 21:46.15 | Inv_arp | CrazyYoss: my amd 350mhz 128ram handles 5 sip/ilbc at the office no hiccups |
| 21:46.23 | CrazyYoss | Inv_arp: whats the max a standard phone line can have going through it? |
| 21:46.28 | fugitivo | Inv_arp: ilbc? nice |
| 21:46.46 | Ariel_ | hello everyone. |
| 21:46.48 | CrazyYoss | <--noob, what is sip/ilbc? |
| 21:47.16 | Inv_arp | CrazyYoss: dont get your question on max std phone line... as much as ports/cards you have avail |
| 21:47.22 | Inv_arp | Ariel_: hey man |
| 21:47.28 | Ariel_ | Sip is a protocal for voip device ilbc is the codec used for the compression. |
| 21:47.45 | Ariel_ | Inv_arp, hello how is everything going? |
| 21:47.48 | *** join/#asterisk cianhughes (n=cian@cian.ws) |
| 21:48.00 | Katty | Ariel_: mew (= |
| 21:48.07 | Inv_arp | Ariel_: alright ... tryin to look for some php ggs down here |
| 21:48.11 | syzygyBSD | smcmahon: that is a neat trick, you will have to teach me sometime |
| 21:48.17 | Inv_arp | rr gigs |
| 21:48.21 | Ariel_ | php ggs? |
| 21:48.35 | Inv_arp | jobs i should say |
| 21:48.45 | Ariel_ | ahh |
| 21:48.55 | CrazyYoss | Inv_arp: thats my question right there so to handle 10-15 calls simaltaneously I would need 10-15 lines/cards or a provider to send it over ip? |
| 21:49.41 | *** join/#asterisk Dovid (n=dovi5988@pool-141-153-233-195.mad.east.verizon.net) |
| 21:50.38 | Ariel_ | CrazyYoss, what type of band width do you have for your internet? |
| 21:50.39 | spackle | CrazyYoss, one PRI/T1 can handle 23 calls, but PRI lines are expensive. |
| 21:51.41 | CrazyYoss | Ariel_: eventually around 100mbps but a majority will be used for data |
| 21:52.19 | Ariel_ | wow 100mbps to the internet. you can then handle allot of calls |
| 21:52.32 | fugitivo | 100mbps? |
| 21:52.35 | spackle | ;-) |
| 21:52.50 | fugitivo | my lan is that fast |
| 21:52.54 | Katty | DarthClue: ringringringringringringring bananabus |
| 21:53.02 | Katty | DarthClue: dododododedo. |
| 21:53.07 | f0urtyfive | i can give you 100 mbps for the low low price of 3000$ monthly :P |
| 21:53.45 | Ariel_ | yes my lan is that fast but not my internet connection. |
| 21:54.02 | smcmahon | LOL my LAN is 1000MBPS |
| 21:54.18 | f0urtyfive | ... congrats? |
| 21:54.22 | CrazyYoss | Ariel_: what kind of bandwidth am I talking about needing for 10-15 calls simaltaneously and do providers compress the audio before sending it? |
| 21:54.22 | shido6 | . |
| 21:54.27 | Ariel_ | smcmahon, my servers are on a 1gig switch but not my users. |
| 21:54.41 | f0urtyfive | CrazyYoss: 75kbps*15 |
| 21:54.43 | smcmahon | Ariel: Bandwith control |
| 21:55.45 | Ariel_ | actually 80K per call is more of what you will see. That is using ulaw but with g729 you can get that down to 24kbps per call. |
| 21:55.56 | smcmahon | I'm connect to the net at 4.8 MBPS |
| 21:55.59 | CrazyYoss | f0urtyfive: thank you, now any recommended providers? |
| 21:56.08 | *** part/#asterisk mkrufky (n=mk@68.160.103.77) |
| 21:56.14 | f0urtyfive | CrazyYoss: Depends how many minutes your doing per month |
| 21:56.22 | Ariel_ | g729 8k 16 overhead for ethernet. |
| 21:56.25 | f0urtyfive | and where your doing them to |
| 21:56.44 | fugitivo | 2mbps for 100 concurrent calls with g729 |
| 21:56.48 | CoffeeIV_ | you know how they have the reserved extension names like "s", "t "for timeout, "o "for operator, etc ? what does "a" mean ? |
| 21:57.08 | f0urtyfive | CoffeeIV_: read the manual :P |
| 21:57.21 | Ariel_ | CoffeeIV_, do show application dial |
| 21:57.30 | CoffeeIV_ | I just looked in the yellow asterisk book, it didn't list "a" |
| 21:57.33 | CrazyYoss | f0urtyfive: calls are all coming in to me, im not making any calls. Basically a voicemail server |
| 21:57.55 | fugitivo | i don't have any "a" |
| 21:58.09 | spackle | how can I name my monitored conference recordings as conf_datetime? |
| 21:58.42 | f0urtyfive | CrazyYoss: You didnt specify ;) |
| 21:58.50 | f0urtyfive | CrazyYoss: You'd still need to figure out how many minutes you'd want... |
| 21:58.54 | spackle | Monitor(wav,/var/spool/asterisk/monitor/conf${datetime},m) I'm trying to concatenate conf+timestamp to name the file but it doesn't work like this. Anybody know how? |
| 21:59.04 | *** part/#asterisk mistik1 (i=rasta@ool-44c02704.dyn.optonline.net) |
| 21:59.17 | CoffeeIV_ | Ariel_: I did show appliaciton dial and there is no mention of "a" |
| 21:59.27 | PakiPenguin | btw i dont know if anyone noticed , the spelling of creator in the Astricon banner are wrong |
| 21:59.27 | f0urtyfive | CrazyYoss: if your doing a substantial ammount of minutes, you could get a fairly good deal, if not, probably around 1c per minute for normal numbers, and 2-3c per minute for 800 |
| 22:00.00 | PakiPenguin | http://www.digium.com/images/email/astricon_2005.gif |
| 22:00.09 | *** join/#asterisk bkw__ (n=brian@adsl-69-154-1-104.dsl.tulsok.swbell.net) |
| 22:00.17 | CrazyYoss | f0urtyfive: ahhh now for bulk rates such as 5000+ would that number be any lower? |
| 22:00.35 | smcmahon | *Ponders* Would it be considered a Terrorist Act by the United States of America to call all the coin-operated-stations (pay phones) in your city and make them all ring at once every 5 minutes for 3 days in your city? heh |
| 22:00.46 | f0urtyfive | CrazyYoss: 5000 minutes? Probably not... |
| 22:01.01 | CoffeeIV_ | the extension "a" is used in macro-vm, and I'm trying to add a system command right after the call to VoiceMailMain, to runa script to notify me of a new VM. adding exten => a,3, system(whatever) didn't work, neither did exten => s,9,system(whatever) |
| 22:01.10 | *** join/#asterisk l-fy (n=pchitesc@yate/developer/l-fy) |
| 22:01.12 | l-fy | hello |
| 22:01.15 | spackle | smcmahon: stupid asterisk tricks |
| 22:01.23 | fugitivo | CoffeeIV_: what is macro-vm? |
| 22:01.24 | smcmahon | tricks? |
| 22:01.31 | l-fy | did someone manage to install 16 E1's into a single box, and to have full load? |
| 22:01.54 | syzygyBSD | smcmahon: yes it would be a terroist attack, labeled as an atack on our communication infrastructure |
| 22:02.16 | smcmahon | Umm Install 1 E-1 to 16 Boxes would be better |
| 22:02.20 | CoffeeIV_ | fugitivo: its the macro for voicemail in my extension.conf; my extension.conf was (mostly) made by doing make examples in the asterisk source |
| 22:02.29 | CrazyYoss | f0urtyfive: so id have a provider send me the data then use a program like asterisks to do what I need? |
| 22:02.36 | fugitivo | CoffeeIV_: using *@home? |
| 22:02.42 | l-fy | smcmahon > let's not talk about what i want to do, let's talk if is possibile to install 16 E1's in a single box |
| 22:02.42 | f0urtyfive | CrazyYoss: Considering I dont know what you need.... |
| 22:02.49 | CoffeeIV_ | fugitivo: no |
| 22:02.53 | l-fy | i'm refering to normal pstn - pstn routing |
| 22:02.54 | *** join/#asterisk _DAW (n=bob@1.sub-70-197-179.myvzw.com) |
| 22:02.58 | fugitivo | CoffeeIV_: where did you get that macro? |
| 22:02.59 | f0urtyfive | CrazyYoss: It sounds like you need to do a _lot_ more research, or hire a consultant to setup whatever you want to do |
| 22:03.02 | smcmahon | I think you would run into a sort of bottleneck somewhere |
| 22:03.19 | CrazyYoss | f0urtyfive: hehehe yup...just trying to get a general understanding |
| 22:03.21 | smcmahon | OKay. How many lines per E-1. |
| 22:03.37 | l-fy | smcmahon > that mean fully 480 channels |
| 22:03.48 | CrazyYoss | f0urtyfive: thank you for your help |
| 22:03.53 | smcmahon | 480 Channels over 16 E-1's ? |
| 22:04.04 | l-fy | and since is a busy box it will handle minumum 30000 calls /hour |
| 22:04.08 | l-fy | well |
| 22:04.13 | l-fy | 16*30 = 480 |
| 22:04.37 | CoffeeIV_ | fugitivo: I installed asterisk from source, and did "make examples" or "make config" or whatever it is int eh /usr/src/asterisk dir that makes some example configs. Or maybe the file was there by default without make whatever. I followed the installation instructions for installing asterisk from source. |
| 22:04.38 | smcmahon | Yeah I'm sure asterisk would not handle that very well on one box |
| 22:04.54 | l-fy | so i have 480 channels which will mean 240 simultainous calls |
| 22:04.56 | f0urtyfive | CrazyYoss: What exactly are you trying to do? |
| 22:05.11 | *** join/#asterisk convey (n=test@66.55.43.2) |
| 22:05.12 | fugitivo | CoffeeIV_: head? |
| 22:05.14 | l-fy | smcmahon > i intend to use a similar system with asterisk, but not asterisk |
| 22:05.23 | smcmahon | I would recommend more than 1 asterisk box for that kind of task |
| 22:05.25 | CrazyYoss | f0urtyfive: basically a system where users can call in record a message and its stored on a server |
| 22:05.25 | l-fy | i know that asterisk may have problems |
| 22:05.27 | CoffeeIV_ | fugitivo: no |
| 22:05.37 | convey | Can anyone recommend a good * friendly provider other than broadvoice? |
| 22:05.42 | f0urtyfive | CrazyYoss: What would be the point? |
| 22:05.44 | CoffeeIV_ | fugitivo: sorry, it WAS from head, about 3 weeks ago |
| 22:05.44 | *** part/#asterisk ctooley (n=ctooley@rrcs-24-227-212-181.sw.biz.rr.com) |
| 22:05.47 | l-fy | this is why i ask, if someone did that then i will not have a problem to do it with my system |
| 22:05.49 | smcmahon | convey ... Use Asterlink |
| 22:05.49 | CrazyYoss | f0urtyfive: audio blogging |
| 22:05.53 | f0urtyfive | CrazyYoss: o... |
| 22:06.11 | f0urtyfive | CrazyYoss: Yeah, that shouldnt be _too_ hard... I assume you'd want to take the audio onto a webpage or something? |
| 22:06.16 | smcmahon | convey ... Asterlink uses asterisk to provide voip |
| 22:06.33 | *** join/#asterisk dudes (n=dudes@12-215-34-84.client.mchsi.com) |
| 22:06.41 | CrazyYoss | f0urtyfive: yeah I can do that no problem....its the "non digital world" that scares me |
| 22:06.43 | smcmahon | convery ... www.asterlink.com |
| 22:06.43 | fugitivo | convey: someone recommended me iaxtel some time ago |
| 22:07.17 | fugitivo | l-fy: how are you going to put 16 e1 in a box? |
| 22:07.21 | convey | thanks all |
| 22:07.25 | convey | I will try both |
| 22:07.31 | l-fy | fugitivo > i intend to use 4 sangoma A104 cards |
| 22:07.35 | fugitivo | l-fy: maybe you'll need a cluster |
| 22:08.03 | l-fy | fugitivo > the customer had required one box |
| 22:08.10 | l-fy | i just do the job |
| 22:08.13 | *** join/#asterisk Kyreeth (n=ashley@aquila.feathers.net) |
| 22:08.17 | smcmahon | l-fy: Make 4 Asterisk Boxes to acomplish this feat. |
| 22:08.18 | fugitivo | the customer never knows what he wants :) |
| 22:08.30 | l-fy | smcmahon > i never use asterisk |
| 22:08.36 | Ariel_ | l-fy, I have a box working with 3 te410p in it. Without issues. |
| 22:08.43 | l-fy | fugitivo > my customers are smart |
| 22:08.57 | l-fy | Ariel_ > please tell me your hardware configuration |
| 22:08.58 | fugitivo | l-fy: then why are your customers? |
| 22:09.04 | l-fy | what motherbord? |
| 22:09.19 | smcmahon | Ariel_: Are you getting 30,000 calls an hour tho? |
| 22:09.24 | l-fy | fugitivo > most of our customers require custom solutions |
| 22:09.51 | Ariel_ | Intel Dual Xeon with 1 gig ram External Raid box controller on an intel MB |
| 22:10.18 | l-fy | Ariel_ > can you tell me the exactly mb? |
| 22:10.28 | smcmahon | Intel SE75000WV2 Dual Gigabit Ethernet 3 GB of Ram, SCSI Option. |
| 22:10.42 | smcmahon | 2.4 GHZ XEON Processors |
| 22:10.52 | Ariel_ | l-fy, no I did not build it another person did. But I can find out later. |
| 22:10.58 | smcmahon | SE7500WV2 not 0000 lol |
| 22:11.20 | l-fy | Ariel_ > which load do you have? |
| 22:11.43 | Ariel_ | we have a custom load of asterisk stable on 1.0.7 version which we have modified. |
| 22:11.59 | *** join/#asterisk podzap (n=podzap@roswell.pp.saunalahti.fi) |
| 22:12.06 | *** join/#asterisk r0d3nt (i=nobody@wsip-24-234-241-145.lv.lv.cox.net) |
| 22:12.14 | l-fy | Ariel_ > i don't even have an asterisk, so it dosen't matter |
| 22:12.22 | l-fy | i will not even use digium cards |
| 22:12.31 | l-fy | but i need to know teoretical |
| 22:12.38 | fugitivo | l-fy: what will you run? |
| 22:12.59 | l-fy | fugitivo > 4 sangoma A104 + yate + wanpipe interface insted of zaptel |
| 22:13.01 | Ariel_ | These boxes are 3 of them with hartbeat and qfs file systems both are connected to an Adtran box from the pstn provider. |
| 22:13.12 | fugitivo | l-fy: what is yate? |
| 22:13.14 | fugitivo | a boute? |
| 22:13.16 | l-fy | Ariel_ > what is the load |
| 22:13.20 | fugitivo | boat? |
| 22:13.24 | l-fy | ~yate |
| 22:13.29 | l-fy | o well |
| 22:13.31 | l-fy | ask google |
| 22:13.39 | bkw__ | http://yate.null.ro/pmwiki/ |
| 22:13.48 | fugitivo | thanks bkw_ |
| 22:14.13 | bkw__ | to be honest its not about who makes what.. its about everything working and working well together ;) |
| 22:14.15 | Ariel_ | l-fy, normal hands between 5000 to 6000 sip users. but have never see it reach all 12 t1 ports in use. |
| 22:15.08 | Ariel_ | l-fy, if you don't use asterisk why are you here? |
| 22:15.28 | fugitivo | l-fy: why yate and not asterisk? |
| 22:15.30 | smcmahon | Because he has some sort of dimensia bringing him here |
| 22:15.34 | l-fy | Ariel_ > yate is a similar system |
| 22:15.45 | l-fy | smcmahon > i'm a she :) |
| 22:15.49 | bkw__ | haha |
| 22:15.52 | bkw__ | you tell em |
| 22:15.53 | bkw__ | ;) |
| 22:15.56 | smcmahon | Oh nasty |
| 22:16.05 | fugitivo | why yate? |
| 22:16.10 | l-fy | Brian, down boy :) |
| 22:16.30 | opus_ | whats yate like? |
| 22:16.30 | bkw__ | ASTERISK IS NOT THE ANSWER TO EVERYTHING |
| 22:16.32 | l-fy | fugitivo > this is asterisk channel, let's not talk about yate, there is an #yate channel for that |
| 22:17.08 | file[laptop] | bkw_: we can do conferences on the new platform now ;) |
| 22:17.14 | fugitivo | l-fy: we talk about sex and trains here, why wouldn't we talk about yate? |
| 22:17.34 | bkw__ | fugitivo, because we can |
| 22:17.35 | l-fy | fugitivo > because is fair this way |
| 22:17.45 | l-fy | and because i can't talk about yate since i've wrote a part of it :) |
| 22:17.54 | fugitivo | ok |
| 22:17.56 | fugitivo | hold on |
| 22:18.18 | *** join/#asterisk kshumard_home (n=ksh@pcp08979908pcs.huntsv01.al.comcast.net) |
| 22:19.04 | opus_ | yate yay |
| 22:19.59 | swm_ | swm = Stephen William Mcmahon * Salem, Oregon 97301 |
| 22:21.48 | swm_ | anyone use the 996 confrence in channel 996? |
| 22:21.48 | opus_ | hi swm. |
| 22:21.48 | opus_ | whats channel 996? |
| 22:21.49 | swm_ | LOL |
| 22:22.05 | swm_ | Go to #996 and type ~list |
| 22:23.04 | *** join/#asterisk jsb32 (n=gravitis@128.100.33.138) |
| 22:23.45 | jsb32 | hi -- I've set up a couple SIP phones, but it seems that asterisk stops processing calls from them after a few minutes.. I need to keep issuing a console 'reload'.. is there a timeout I don't know about? |
| 22:24.04 | *** join/#asterisk cuga_ (n=cuga@CPE0000d11fb269-CM0012c92137d6.cpe.net.cable.rogers.com) |
| 22:24.52 | podzap | well |
| 22:25.32 | PakiPenguin | anyone having trouble with compiling asterisk-addons |
| 22:25.44 | podzap | i managed to get asterisk working behind NAT, with FreeBSD and pf. it was a real fucking pain in the ass. |
| 22:25.53 | Qwell | podzap: it usually is |
| 22:26.02 | jsb32 | podzap: it really was. |
| 22:26.42 | PakiPenguin | hello?? |
| 22:26.45 | podzap | pf wasn't the pain in the ass, but that was (ipf and nat) |
| 22:26.56 | podzap | i had to switch my entire firewall setup |
| 22:27.11 | fugitivo | pf is easy and rocks |
| 22:27.14 | podzap | pf works like a dream |
| 22:27.28 | xheliox | pf is the best, and I hate BSD |
| 22:27.49 | fugitivo | why isn't pf ported to linux? |
| 22:28.02 | opus_ | cuz its got IPTables |
| 22:28.12 | *** join/#asterisk snewpy (n=markl@203-214-131-5.dyn.iinet.net.au) |
| 22:28.15 | fugitivo | iptables is much inferior to pf |
| 22:28.17 | podzap | iptables sucks ass, just like ipf and ipfw |
| 22:28.38 | opus_ | i don't have problems with iptables.. |
| 22:29.03 | opus_ | has connection tracking, qos, |
| 22:29.03 | podzap | the syntax looks like the output from a bad perl coder |
| 22:29.14 | swm_ | IP Tables only sucks if the user doesn't know what thier doing |
| 22:29.22 | Nugget | isn't "bad perl coder" redundant? :) |
| 22:29.41 | opus_ | haha |
| 22:29.44 | podzap | i write very neat and easy to read perl code :-) |
| 22:30.11 | opus_ | well its not like brain surgury, or writing regex's |
| 22:30.13 | fugitivo | pf syntax is perfect |
| 22:30.16 | opus_ | which will cause your brain to blow up |
| 22:30.17 | fugitivo | it's art |
| 22:30.20 | fugitivo | it has style |
| 22:30.43 | Nugget | pf+altq is delicious. life altering. |
| 22:30.49 | podzap | i setup an extension to play wu-tang-clan gravel pit mp3 when i call it :-) |
| 22:31.01 | swm_ | There is no actual style of programming. I think that is the person reading it who needs to re-align thier way of decyphering the code they are reviewing |
| 22:31.06 | *** part/#asterisk nowster (n=pm@glanrhyd.zetnet.co.uk) |
| 22:31.34 | podzap | swm_: there is neat and there is sloppy, in a bedroom, and in source code |
| 22:31.37 | fugitivo | yes there is |
| 22:32.08 | podzap | put all of your shoes in a row, line up similar items in source code, etc... |
| 22:32.09 | *** join/#asterisk abatista (n=Ariel@dsl-20-177.cofs.net) |
| 22:32.22 | swm_ | OKay I could agree with the sloppy programming part,... Never seen the bedroom issue. Seems like you know a little about sloppy bedroom manners heh |
| 22:32.42 | podzap | swm_: yeah, i've lived with my wife for 8 years now... |
| 22:32.44 | opus_ | technical support -> don't worry be happy :) |
| 22:33.29 | *** part/#asterisk Cresl1n (n=matt@gateway.digium.com) |
| 22:33.31 | jsb32 | ok - questionne... Asterisk keeps "timing out" or something, and not accepting calls from my SIP phones, and I need to keep issuing a "reload"... ideas? |
| 22:33.51 | swm_ | jsb32: turn off qualify |
| 22:33.58 | ariel_ | argh I hate it when the network resets |
| 22:34.02 | podzap | and now i even managed to get a functional asterisk with only 12 configuration files |
| 22:34.08 | Qwell | ariel_: its a nice ride |
| 22:34.17 | ariel_ | really now |
| 22:34.28 | jsb32 | swm_: that's it? |
| 22:34.43 | swm_ | Try it |
| 22:35.26 | podzap | anybody here running * on a wrt54g? |
| 22:35.29 | *** join/#asterisk fiber0pti (n=johndoe@207.114.199.98) |
| 22:35.40 | swm_ | podzap: yeppers |
| 22:35.52 | fiber0pti | how many pri circuits can a moderate digium card handle? |
| 22:36.01 | Qwell | fiber0pti: one per port? |
| 22:36.02 | CoaxD | a 'moderate digium card'? |
| 22:36.04 | sams | anyone have any recommendations for a voip provider that offers multiple local numbers, 800#, has fax support, and supports concurrent inbound/outbound calls? |
| 22:36.17 | *** part/#asterisk outtolunc (i=outtolun@adsl-66-218-53-170.dslextreme.com) |
| 22:36.21 | swm_ | sams: NONE |
| 22:36.21 | podzap | swm_: could you pastebin the output of ipkg list_installed and df -k ? |
| 22:36.41 | Qwell | sams: asterlink can do 2-3 of the 4 |
| 22:36.43 | fiber0pti | Qwell: is the TI/E1/J1 interface that digium talks about a PRI interface? |
| 22:36.44 | swm_ | podzap: not at the current moment but later tonight |
| 22:36.49 | Qwell | fiber0pti: it can be |
| 22:37.02 | Qwell | PRI is a protocol, T1 is an interface...iirc |
| 22:37.05 | podzap | swm_: oh, it's 2am ... i have to go to bed in a minute! |
| 22:37.23 | swm_ | podzap: It's 3:43 pm here. |
| 22:37.26 | jsb32 | swm_: thanks-- |
| 22:37.27 | sams | so no one does it all? that's horrible... means I gotta keep track of 2 or 3 different bills just for phone services |
| 22:37.27 | CoaxD | Qwell: Close enough |
| 22:37.40 | Qwell | CoaxD: please do correct me, if I'm off.. |
| 22:37.43 | swm_ | jsb32: did that solve it ? |
| 22:37.58 | CoaxD | Qwell: T1 is the delivery layer |
| 22:38.05 | CoaxD | Qwell: The protocols you run on top are irrelevant |
| 22:38.09 | CoaxD | Qwell: (to the T1 layer) |
| 22:38.28 | Qwell | delivery layer...interface...yeah, close enough. heh |
| 22:38.59 | jsb32 | swm_: I believe so.. |
| 22:39.28 | swm_ | jsb32: You can dial and receive calls correct? |
| 22:39.40 | jsb32 | swm_: yep yep |
| 22:39.55 | swm_ | jsb32:: Qualify does sometimes cause problem |
| 22:40.14 | fiber0pti | Qwell: if I have a PRI circuit going into the asterisk box what is the appropriate FXS card and how does that interconnect with a punch down block |
| 22:40.23 | Qwell | You don't use an FXS card. |
| 22:40.34 | fiber0pti | FXO? |
| 22:40.35 | Qwell | how many PRIs? Just one? |
| 22:40.43 | fiber0pti | Correct.. just one. |
| 22:41.05 | Qwell | get a TE105 or TE110 |
| 22:42.07 | fiber0pti | but for analog phones connected to a punch-down block on the office side how would you interconnect those? |
| 22:42.10 | CoaxD | fiber: You need to learn how T1 works. Then, you'll KNOW how it is punched down |
| 22:42.11 | swm_ | Qwell: Why not something more fancy |
| 22:42.11 | FuriousGeorge | can someone translate this for me: Sep 16 14:38:51 WARNING[12459]: chan_iax2.c:5553 socket_read: Call rejected by 198.22.67.70: No authority found |
| 22:42.27 | FuriousGeorge | im registered with the server, but i can't call out |
| 22:42.32 | Druken | you don't have access to make a call on that server |
| 22:42.33 | swm_ | FuriousGeorge: Ya dont know what your doing. |
| 22:42.37 | CoaxD | fiber: Start reading. |
| 22:42.37 | Qwell | fiber0pti: okay, so you have one PRI from your telco, and you want that about 24 phones? |
| 22:42.42 | FuriousGeorge | swm_: cut me some slack |
| 22:42.45 | CoaxD | Qwell: 23. |
| 22:42.47 | Qwell | s/that // |
| 22:42.57 | fiber0pti | Qwell: Yes, let's say 23, 1 is the D channel for signalling, but yes |
| 22:43.06 | swm_ | Furious: What are you communicating with? |
| 22:43.16 | sigwerk | the aliens |
| 22:43.24 | Qwell | either get a TE405/410, or two of the aforementioned cards, and a channel bank with ~24 FXS |
| 22:43.32 | sigwerk | had to :D |
| 22:43.42 | Qwell | something like an adtran |
| 22:43.46 | FuriousGeorge | swm_: im not sure what your refering to. im communicating with a remote softphone, my asterisk box, and pots |
| 22:43.51 | Qwell | or that other one...something access |
| 22:44.03 | *** join/#asterisk jimlinux (n=jim@69.49.168.58.swcp.com) |
| 22:44.17 | swm_ | so then your using a IAx softphone? |
| 22:44.50 | Qwell | fiber0pti: the TE405/410 is a bit more expensive then two of the others, but if you ever expand, you won't need to buy more cards |
| 22:44.51 | FuriousGeorge | swm_: no but i dont need to. remote eyebeyam <sip> asterisk <iax> pots |
| 22:44.52 | swm_ | Furious, Set asterisk to debug level, and pastebin it |
| 22:46.19 | Qwell | Carrier Access...thats the one |
| 22:46.28 | Qwell | fiber0pti: http://www.voip-info.org/tiki-index.php?page=Asterisk+Channel+Bank |
| 22:46.30 | podzap | then is not a comparative |
| 22:47.00 | podzap | you can't say "more expensive then something" |
| 22:47.02 | Qwell | podzap: I failed English 12 times. I don't really care. |
| 22:47.30 | Qwell | and yes, I know, than, but really, I just don't care. :p |
| 22:47.50 | f0urtyfive | hey guys anyone have an h323-enabled asterisk that can test call an IP for me? |
| 22:48.46 | CoaxD | podzap: Someone after my own heart. |
| 22:48.55 | CoaxD | podzap: if i would of known, i would of talked to you sooner. :) |
| 22:49.02 | Qwell | OF?! |
| 22:49.04 | Qwell | WOULD OF?! |
| 22:49.05 | Qwell | :p |
| 22:49.07 | CoaxD | Qwell: :) :) |
| 22:49.20 | Qwell | Who's the grammar nazi now? |
| 22:49.25 | CoaxD | Qwell: (my #1 grammar-based pet peeve, ever.) |
| 22:49.36 | FuriousGeorge | swm_: http://pastebin.ca/23148 |
| 22:49.40 | Qwell | yeah, that one pisses me off to no end |
| 22:49.47 | CoaxD | Qwell: Indeed. |
| 22:50.09 | *** join/#asterisk generalhan (i=general_@ip67-90-64-2.z64-90-67.customer.algx.net) |
| 22:50.25 | generalhan | maybe someone can help me out with a real easy question lol |
| 22:50.32 | Qwell | generalhan: probably not |
| 22:50.33 | FuriousGeorge | swm_: it was working yesterday, ive been tinkering a bit since i found it it stopped working, but thats essentially a working install from yesterday, give or take |
| 22:50.34 | Qwell | but, go ahead |
| 22:51.16 | generalhan | when i used to do asterisk -r with verbosity at 42 i used to get colored display that helped me out a lot, like the notices would show up in yellow. warnings in red. and now it doesnt do that for me anymore |
| 22:51.24 | generalhan | is there a way that i can turn that back on ? |
| 22:51.43 | Qwell | generalhan: I think there was a bug related to that |
| 22:51.49 | Qwell | might want to check the bug tracker |
| 22:52.06 | podzap | CoaxD: would've != would of |
| 22:52.18 | podzap | CoaxD: would've = would have |
| 22:52.27 | Qwell | podzap: he was being sarcastic |
| 22:52.28 | *** join/#asterisk MikeJ[Laptop] (n=ircatjer@d14-69-8-30.try.wideopenwest.com) |
| 22:52.35 | podzap | hehe |
| 22:52.58 | mishehu | gah. |
| 22:53.03 | mishehu | g729 woes... |
| 22:53.19 | podzap | i am not really a grammar nazi, but I just think it sounds pretty stupid to substitute then for than |
| 22:53.43 | podzap | i could understand if a non-native english speaker did it, maybe... |
| 22:53.47 | mishehu | podzap: you don't like people who speak goodly and more better? |
| 22:53.56 | Qwell | a non-native english speaker would never make that mistake |
| 22:53.58 | podzap | lol! |
| 22:54.09 | Qwell | s/would/should |
| 22:55.12 | swm_ | http://pastebin.ca/23148 |
| 22:55.21 | swm_ | anyone make sense of furiousgeorge's pasebin? |
| 22:55.39 | podzap | if people can't get comparatives and spelling correct when writing their language, how in the hell do they ever write code which compiles? :-) |
| 22:55.42 | f0urtyfive | do people in here normally use cvs asterisk for production use? |
| 22:56.52 | Troy__ | question -- i have a adtran tsu 100 w/4fxo ports can i inverse mux 4 analog lines and send them to a digium 110p t-1 card into * |
| 22:57.07 | ariel_ | f0urtyfive, I use cvs -r 1.0 |
| 22:57.28 | swm_ | I use CVS_HEAD |
| 22:57.29 | mishehu | I don't have to re-register this g729 codec everytime I update asterisk, do I? |
| 22:57.52 | ariel_ | Oil futures are down 1.75.... so far so good. There slowly going down. |
| 22:57.52 | swm_ | I have never had to relicense g729 on an update |
| 22:58.22 | _DAW | I had to register again after updating from stable 1.0.9 to beta 1 |
| 22:58.24 | Qwell | ariel_: good for consumers who don't invest on the futures market. ;] |
| 22:58.53 | ariel_ | Qwell, oil now adays is over priced |
| 22:59.05 | Supaplex | you think? |
| 22:59.05 | ariel_ | dam spelling keyboard... |
| 22:59.10 | Qwell | ariel_: won't argue with that |
| 22:59.22 | podzap | ariel_: where do you live? |
| 22:59.39 | Supaplex | and the price of gasoline to crude is greatly out of wack |
| 22:59.42 | ariel_ | 16 miles south west of Miami. Almost in the everglades |
| 22:59.57 | generalhan | Qwell: the bug just started happening though? cause it used to be in color for a really long time and now all the sudden its not ... i miss my colors ! LOL |
| 23:00.00 | mishehu | swm_: hmm, must be a bug in 1.2.0b1 then, because I can't use the codec |
| 23:00.00 | swm_ | Does this look wrong?? exten => _1NXXNXXXXXX,2,Dial,IAX2/FuriousGeorge@NuFone/${EXTEN} 1 |
| 23:00.03 | podzap | the oil prices in the USA are finally catching up with the rest of the world; they are not overpriced in the USA, they have just been underpriced forever. |
| 23:00.34 | podzap | i, for one, am glad to finally see americans start to pay like the rest of the world pays for gas. |
| 23:00.39 | mishehu | podzap: actually, I thought it was mostly because other countries in the world tax the hell out of gas |
| 23:00.44 | swm_ | ~cnn |
| 23:00.47 | jbot | CNN: Americans are requested to kiss each other less strongly to avoid 'the Earth moving' too much. |
| 23:00.47 | mishehu | not that it actually costs them that much |
| 23:01.09 | ariel_ | podzap, yes they are. When the us has lots of oil that is not allowed to be taken from the ground due to laws it's over priced. |
| 23:01.10 | podzap | mishehu: they tax the hell out of gas in the US also, just the base price there is lower. |
| 23:01.21 | swm_ | ~file |
| 23:01.39 | swm_ | ~reboot |
| 23:01.40 | jbot | Not on your life cowboy :(, or are you using Window$? |
| 23:01.48 | *** join/#asterisk athoms (n=iam@toronto-HSE-ppp3995285.sympatico.ca) |
| 23:01.48 | mishehu | podzap: 25-50 cents tax per gallon versus 50 cents per liter? |
| 23:01.54 | swm_ | ~ups |
| 23:01.55 | jbot | Light C and C++ debugger under X11.. URL: http://www.concerto.demon.co.uk/UPS/ |
| 23:02.06 | swm_ | ~shit |
| 23:02.07 | jbot | i guess shit is feces |
| 23:02.16 | swm_ | ~jbot dict shit |
| 23:02.38 | swm_ | ~jbot dict file |
| 23:02.39 | f0urtyfive | Podzap: they definetly dont tax the shit out of gas in the US |
| 23:02.40 | podzap | mishehu: i can guarantee you that the gas tax per gallon is not 50 cents today |
| 23:02.50 | f0urtyfive | Podzap: in New Jersey its as low as 10-15c per gal |
| 23:02.51 | swm_ | ~jbot dict inode |
| 23:03.10 | Qwell | ~bot abuse |
| 23:03.11 | jbot | ACTION huddles in the corner, whimpering 'please, please stop' |
| 23:03.21 | f0urtyfive | lol |
| 23:03.27 | mishehu | ~lart Qwell |
| 23:03.30 | podzap | regardless of the tax percentage, I want to see americans pay the same price for gas as the rest of the world :-) |
| 23:03.37 | podzap | 4-5 USD per gallon |
| 23:03.47 | swm_ | LOL |
| 23:03.51 | swm_ | ~jbot dict gangbang |
| 23:03.57 | f0urtyfive | lol |
| 23:04.01 | f0urtyfive | that sounds kind of silly |
| 23:04.05 | podzap | i am really happy to see it getting up to 3.50 per gallon in the US |
| 23:04.09 | Qwell | swm_: seriously, thats getting old |
| 23:04.09 | mishehu | podzap: well, it ain't surprising me. I knew this day would come, so I drive a corolla |
| 23:04.14 | swm_ | ~jbot dict rape |
| 23:04.21 | athoms | I need some help with ztdummy on a 2.6 install |
| 23:04.23 | mishehu | i've paid $4-5 a gallon |
| 23:04.24 | f0urtyfive | so we should pay more than you, even though we get taxed less? |
| 23:04.26 | fiber0pti | When I dial out through asterisk and there's no one talking there's a lot of static. Any ideas on how to reduce this? |
| 23:04.29 | fugitivo | ~jbot dict asterisk |
| 23:05.09 | Supaplex | jbot thinks asterisk is a ****** ? ;) |
| 23:05.10 | jbot | okay, Supaplex |
| 23:05.22 | swm_ | fiberOpti: Go fiber optic on your lines -or- get a line filter? |
| 23:05.28 | generalhan | Qwell: you still here ? |
| 23:05.36 | Qwell | generalhan: nope |
| 23:05.46 | athoms | anyone interested in helping out a newbie on asterisk? |
| 23:05.47 | podzap | f0urtyfive: no, i'd just be happy if americans paid the same for things as the rest of the world, then it would reduce the purchasing power of americans and they would start to see themselves as equals to the rest of the people in the world. it's just my philosophy... |
| 23:05.52 | generalhan | the bug tracker says that the color problem is related to viewing the console in 'linux' as oppoesed to 'screen' |
| 23:05.57 | f0urtyfive | lol |
| 23:05.58 | swm_ | athoms: whats up |
| 23:06.05 | podzap | btw, i am an american. |
| 23:06.12 | f0urtyfive | podzap: And we just told you that we do pay the same, but our taxes are less... |
| 23:06.13 | generalhan | i dont understand. how do i view it in linux? i thought thats what i was doing LOL |
| 23:06.13 | fiber0pti | is it normal to get static even when dial the number? |
| 23:06.23 | fugitivo | athoms: i have a wish list in thinkgeek |
| 23:06.28 | swm_ | it's "when i dial the number" |
| 23:06.39 | athoms | unable to load ztdummy, needed to use meetme |
| 23:06.44 | fugitivo | athoms: no zaptel? |
| 23:06.57 | athoms | no not in this box |
| 23:07.05 | ariel_ | generalhan, which version are you using? mine displays in color |
| 23:07.08 | fugitivo | you need zaptel or ztdummy |
| 23:07.11 | Qwell | ztdummy comes with zaptel |
| 23:07.11 | podzap | f0urtyfive: 3.50 per gallon is not quite what the prices are in europe. The gas here is currently 1.32 per liter, 3.87 liters being one US gallon. |
| 23:07.12 | generalhan | 1.0.9 |
| 23:07.13 | swm_ | *smoke a cigarette, take a shot of orange mandrian vodka, and try again* |
| 23:07.35 | f0urtyfive | podzap: Now go findout what european tax is per litra |
| 23:07.37 | f0urtyfive | litre |
| 23:07.38 | fugitivo | athoms: you need a timer device for meetme, ztdummy will provide that |
| 23:07.38 | generalhan | ariel_: but im using PuTTY to view the console, does that matter ? |
| 23:07.53 | swm_ | why dont they name it "ztdipshit" |
| 23:08.13 | swm_ | ~jbot dict meth |
| 23:08.15 | ariel_ | generalhan, Asterisk 1.0.9 built by root is on mine and works with putty. |
| 23:08.31 | athoms | ztdummy is what I am trying to use, but I can't get it to load |
| 23:08.37 | fiber0pti | no matter what codec I use I get quite a bit of static even when just dialing a number and then listening. The same static can be heard when the line is slient. |
| 23:08.39 | Qwell | athoms: What does it say? |
| 23:08.39 | fiber0pti | any ideas? |
| 23:08.39 | podzap | that comes up to 6.24 USD per gallon for gasoline |
| 23:08.43 | swm_ | modprobe |
| 23:08.56 | swm_ | insmod |
| 23:09.00 | generalhan | ariel_: crap ... mine USED to show color using PuTTY, and now for some reason it doesnt ... that was SOO helpmful too |
| 23:09.02 | fugitivo | fiber0pti: how is your call route? |
| 23:09.15 | fugitivo | fiber0pti: pstn -> asterisk -> sip device ? |
| 23:09.21 | swm_ | generalhan: what is PuTTY? |
| 23:09.37 | Nugget | PuTTY is what windows users use for ssh. |
| 23:09.38 | generalhan | my savior ! lol |
| 23:09.43 | swm_ | Eww |
| 23:09.52 | swm_ | ~jbot dict PuTTY |
| 23:09.54 | fugitivo | it's a pu tty |
| 23:09.56 | Qwell | "Roughly 75 percent (depending on grade) of U.K. gas price is taxes" |
| 23:09.56 | fiber0pti | sip device -> asterisk -> sip provider. BUT I don't even have to complete a number to hear the static. |
| 23:10.11 | swm_ | ~jbot dict PuTTY 2 |
| 23:10.14 | athoms | unable to open pseudo device |
| 23:10.15 | Nugget | It's not bad, but the author is a bit of a twit. |
| 23:10.21 | fugitivo | fiber0pti: network latency? |
| 23:10.23 | swm_ | How do you get 2 of 6 from the dict? |
| 23:10.33 | Qwell | swm_: by going to dictionary.com |
| 23:10.33 | Nugget | I think he was a bit outclassed when he originally developed it, but it's matured a lot since then |
| 23:10.34 | fugitivo | fiber0pti: did you try with another sip device? |
| 23:10.37 | podzap | I couldn't give a shit about taxes. if i pay 6.24USD per gallon of gas, I want to see people in the US pay the same price :-) |
| 23:10.40 | swm_ | ~jbot dict ky |
| 23:10.41 | Qwell | abusing the bot becomes extremely spammy...please stop |
| 23:10.59 | f0urtyfive | swm_: Go buy a dictionary crist |
| 23:11.07 | generalhan | i want my colors back. this sux |
| 23:11.08 | athoms | does ztdummy run on a 2.6 kernel? |
| 23:11.13 | Qwell | athoms: yes |
| 23:11.24 | f0urtyfive | podzap: Lol incredibly logic you have there |
| 23:11.27 | fiber0pti | fugitivo: 1ms to the asterisk server and about 30ms to the voip provider |
| 23:11.41 | podzap | ~jbot dict logic |
| 23:11.49 | fugitivo | fiber0pti: change the sip device or the cable |
| 23:11.50 | Qwell | athoms: Do you get an error when you try to load ztdummy? |
| 23:11.50 | swm_ | I wanna fiber optic phone line |
| 23:12.10 | f0urtyfive | "But in England, about half of what we pay for petrol is a British tax." |
| 23:12.21 | f0urtyfive | Hey thats funny, in England, the gas price is about 2x that in the US! |
| 23:12.24 | f0urtyfive | Surprising isnt it! |
| 23:12.24 | fiber0pti | fugitivo: the sip device is a soft phone, x-lite. can you recommend a better softphone? preferably free |
| 23:12.25 | fugitivo | stop filling my 10 lines bitchx console with dict results |
| 23:12.26 | swm_ | WHO CARES ABOUT GAS PRICES! GET A MOUNTIAN BIKE |
| 23:12.28 | f0urtyfive | lol |
| 23:12.36 | athoms | no loades fine, lsmod showes it running |
| 23:12.38 | gordonjcp | swm_: yeah, what a great idea |
| 23:12.43 | FuriousGeorge | swm_: did you ever look at that pastebin? |
| 23:12.45 | podzap | f0urtyfive: i live in .fi, taxes are probably higher... |
| 23:12.48 | gordonjcp | I'll just mountain bike 250 miles a day |
| 23:12.48 | f0urtyfive | podzap: http://www.guardian.co.uk/worldlatest/story/0,1280,-5278716,00.html |
| 23:12.49 | fugitivo | fiber0pti: no |
| 23:12.56 | Qwell | podzap: so get taxes lowered |
| 23:12.57 | gordonjcp | cretin |
| 23:13.01 | *** part/#asterisk PakiPenguin (n=uppal@linuxpakistan/admin/pakipenguin) |
| 23:13.02 | *** join/#asterisk Darwin35 (n=kvirc@ip70-179-214-245.dl.dl.cox.net) |
| 23:13.08 | f0urtyfive | podzap: enough with your nonsensical complaining about your gas prices being too high, move somewhere with lower taxes |
| 23:13.09 | Qwell | gordonjcp: You commute 250 miles? |
| 23:13.11 | fiber0pti | fugitivo: is it normal to get a large quantity of static? |
| 23:13.14 | Qwell | rather, 125 |
| 23:13.22 | gordonjcp | Qwell: I used to |
| 23:13.22 | swm_ | FuriousGeorge: I looked at youir pastebin and Couldn't figure out anything, I asked people in here to look and they ignored it |
| 23:13.27 | Qwell | christ |
| 23:13.30 | gordonjcp | actually I used to commute 140 miles each way |
| 23:13.32 | fugitivo | fiber0pti: i get sometimes with my atcom 320, but i think the phone is bad, and the cable too |
| 23:13.33 | podzap | Qwell: small countries can not lower taxes, they don't have the scales of economy like large countries do. |
| 23:13.43 | gordonjcp | Qwell: briefly I commuted 230 miles each way, for a couple of weeks |
| 23:13.45 | FuriousGeorge | swm_: oh, i was on the phone so i missed it thaks |
| 23:13.45 | Qwell | podzap: then move to a bigger country, and stop bitching about it. :p |
| 23:13.47 | f0urtyfive | podzap: and that is somehow the large countries fault? |
| 23:13.48 | f0urtyfive | lol |
| 23:13.53 | Qwell | gordonjcp: jesus, why? |
| 23:13.58 | *** join/#asterisk jontow (i=jontow@ws.woflsys.net) |
| 23:14.01 | gordonjcp | Qwell: just the way things worked out |
| 23:14.02 | podzap | no, i just want to see americans pay through the nose |
| 23:14.06 | FuriousGeorge | swm_: i guess ill hit up support.... JERJER!!! j/k im sending an email ;) |
| 23:14.09 | podzap | plain and simple, no logic, no reason |
| 23:14.14 | f0urtyfive | apparently |
| 23:14.17 | *** join/#asterisk darkskiez (n=darkskie@host86-132-168-156.range86-132.btcentralplus.com) |
| 23:14.18 | gordonjcp | Qwell: I live in a fairly big country where everything's a long way apart |
| 23:14.30 | swm_ | Dont rip your hair out trying to hard, it's something simple |
| 23:14.32 | athoms | is the ztdummy need to be config in zapata.conf? |
| 23:14.39 | Qwell | athoms: no |
| 23:14.43 | ariel_ | no |
| 23:14.49 | swm_ | delete zapata.conf heh |
| 23:14.55 | athoms | where does it get configed? |
| 23:15.15 | swm_ | it gets compiled inside your computers hard drive |
| 23:15.33 | darkskiez | athoms: what settings do u want to change? |
| 23:15.56 | podzap | * won't start without a minimal zapata.conf, at least not on my machine... |
| 23:16.05 | athoms | trying to get meetme app working |
| 23:16.16 | *** join/#asterisk __Elf (n=Elf@elf-laptop.glassfish.net) |
| 23:16.19 | athoms | what needs to be in a zapata.conf |
| 23:16.28 | Troy__ | question -- i have a adtran tsu 100 w/4fxo ports can i inverse mux 4 analog lines and send them to a digium 110p t-1 card into * |
| 23:16.33 | swm_ | It's a sequence of one's and zero's stored on a metal plate within a metal box, that has head's running over the plate. |
| 23:17.07 | podzap | athoms: http://pastebin.ca/23149 |
| 23:17.08 | fugitivo | athoms: you only need the module loaded |
| 23:17.13 | swm_ | zapata is not used in the method your using ztdummy for |
| 23:17.16 | podzap | athoms: that is a minimal zapata.conf, which I use |
| 23:17.26 | swm_ | USE -> insmod ztdummy |
| 23:17.32 | swm_ | make |
| 23:17.33 | swm_ | make install |
| 23:17.36 | swm_ | insmod ztdummy |
| 23:18.25 | swm_ | that all you need to do anthoms and it should work fine |
| 23:18.34 | Qwell | insmod? no |
| 23:18.37 | ariel_ | Troy__, you might want to call adtran |
| 23:18.45 | swm_ | no what qwell |
| 23:18.49 | Qwell | modprobe |
| 23:18.50 | FuriousGeorge | swm_: but you see, it isn't entirely that i dont know what im doing. you'll give me that, right? |
| 23:19.13 | swm_ | ok modprobe excuse me |
| 23:19.17 | swm_ | either one works for me |
| 23:19.36 | Troy__ | i would if i believed i wouldnt get a ...uh dunno i guess its possible |
| 23:19.37 | swm_ | modprobe ztdummy |
| 23:20.29 | Troy__ | digium told me the 400p card would do DID but after installing and configure they said no sorry that doesnt do that |
| 23:20.39 | swm_ | qwell: would modprobe -d ztdummy be relevant ? |
| 23:20.47 | athoms | I get an error...unable to open master device '/dev/zap/ctl' |
| 23:20.56 | Qwell | are you using udev? |
| 23:20.58 | *** join/#asterisk [Airwolf] (n=airwolf@attilla.nl) |
| 23:21.00 | Qwell | if so, README.udev |
| 23:21.38 | athoms | ok will read... |
| 23:21.54 | generalhan | some one make my colors come back on my console |
| 23:22.02 | generalhan | lol |
| 23:22.08 | fugitivo | <PROTECTED> |
| 23:22.17 | fugitivo | did it wokr? |
| 23:22.25 | swm_ | Color is for idiots, Black and white is just fine |
| 23:22.39 | generalhan | pfft. color is for idiots ? |
| 23:22.52 | swm_ | Copy that, Thats 100% Affirmative |
| 23:22.56 | fugitivo | smw_ is your monitor b&w? |
| 23:23.17 | swm_ | My monitor is a "color monitor" but I dont see colors on it :) because It's all black and white mode ... |
| 23:23.37 | fugitivo | then you're an idiot that spend money on a color monitor without using the colors |
| 23:23.53 | darkskiez | swm is a muppet |
| 23:23.55 | swm_ | But I didn't spend money on a color monitor, I got them for free |
| 23:24.03 | darkskiez | swm is a muppet |
| 23:24.04 | fugitivo | yeah, you're the man |
| 23:24.06 | darkskiez | damn |
| 23:24.11 | generalhan | i have a real nice 13 inch Green and White monitor ill trade you for your color then |
| 23:24.19 | swm_ | Okay |
| 23:24.31 | swm_ | does it have a VGA connector on it? heh |
| 23:24.36 | fugitivo | i have a 12" orange that'll break your eyes |
| 23:24.38 | darkskiez | generalhan rocks |
| 23:24.48 | darkskiez | god damn this ircclient |
| 23:24.49 | swm_ | I love the old orange ones |
| 23:25.02 | f0urtyfive | lol |
| 23:25.05 | darkskiez | fugitivo: i think you're in the wrong irc channel. |
| 23:25.13 | swm_ | darkskiez is a flake |
| 23:25.24 | fugitivo | darkskiez: no, i'm in the right channel |
| 23:25.40 | swm_ | why not the left channel? Then we could have stereo? |
| 23:26.11 | darkskiez | ba-dum tish |
| 23:26.23 | fugitivo | you're right, i'll clone the desktop so i have a stereo irc |
| 23:26.37 | swm_ | lol |
| 23:26.39 | Qwell | no, not clone - that'd be mono |
| 23:26.49 | Troy__ | http://www.linuxquestions.org/questions/history/351002 |
| 23:26.59 | swm_ | Create a Asterisk-L: and a Asterisk-R |
| 23:27.11 | fugitivo | Qwell: i'll be a fake stereo |
| 23:27.12 | f0urtyfive | ... |
| 23:27.19 | f0urtyfive | you guys have too much time on your hands... |
| 23:27.21 | swm_ | Could also do Asterisk-C and Asterisk-RR and Asterisk-RL and get Surround :) |
| 23:27.43 | fugitivo | f0urtyfive: yes, i use gentoo |
| 23:27.45 | f0urtyfive | lol |
| 23:27.45 | swm_ | Wonder if that would be Dolby Pro Logic or Digital |
| 23:27.55 | Qwell | and MR and ML, 6.1 |
| 23:28.18 | swm_ | I dont think darkskiez could decypher all those channels tho |
| 23:28.19 | fugitivo | emerging world in my p2 400 |
| 23:29.00 | darkskiez | not when i'm busy decoding my 17.3 UDTV system |
| 23:29.13 | swm_ | I think it would be neat to have a virtual room with people from a IRC client in it and kinda make it a digital surround sound chat room in a way but text based |
| 23:29.16 | fugitivo | you mean UDEV system? |
| 23:29.28 | darkskiez | no UDTV, 16xHDTV |
| 23:29.36 | festr | anyone have tryed chan_woomera? |
| 23:29.41 | fugitivo | what is that? i live in the third world |
| 23:30.06 | swm_ | Yeah I tried chan_woomera and a boomerang hit me in the head when i ran it |
| 23:30.13 | darkskiez | fugitivo: its better resolution than thew real world :) |
| 23:30.41 | festr | swm_: did you compile it succesfully? |
| 23:30.43 | fugitivo | darkskiez: what resolution? |
| 23:31.08 | swm_ | LOL resolution is what your eyes see, Nothing can compare to what is outside your home, thus on your TV. For instance if you take a person with full blown cataracks and put them in front of your TV. How is resolution now? :) |
| 23:31.17 | darkskiez | swm: its a futurama joke. |
| 23:31.35 | swm_ | I dont watch lame tv shows sorry |
| 23:31.47 | darkskiez | Ooooooooo fight fight fight |
| 23:31.48 | f0urtyfive | swm seems like he's like 16... |
| 23:32.06 | f0urtyfive | Tryin to be "smarter" then everyone else... |
| 23:32.07 | swm_ | Umm 16 yr oild watch cartoons |
| 23:32.18 | darkskiez | yes they do |
| 23:32.21 | *** join/#asterisk bjohnson (n=bjohnson@i216-58-18-217.cybersurf.com) |
| 23:32.37 | darkskiez | doesnt preclude others from watching them |
| 23:32.40 | swm_ | Statistically I am smarter than 75% of society based on a IQ Test |
| 23:32.45 | fugitivo | ok ok |
| 23:32.50 | darkskiez | an IQ of 75 ey? |
| 23:32.54 | f0urtyfive | lol |
| 23:32.55 | fugitivo | first, iq tests are a joke |
| 23:33.01 | darkskiez | thats not what that means you know. |
| 23:33.09 | swm_ | Umm Add about 132 more to that number |
| 23:33.25 | Qwell | 207? I think not |
| 23:33.27 | darkskiez | you have an iq of 207? |
| 23:33.29 | f0urtyfive | lol |
| 23:33.32 | f0urtyfive | Dummy |
| 23:33.34 | swm_ | Yeppers |
| 23:33.40 | f0urtyfive | 135 IQ is in the 99th percentile |
| 23:33.47 | fugitivo | that must be difficult for you |
| 23:33.57 | darkskiez | whats your age, may I ask? |
| 23:34.12 | swm_ | 25 yrs old, and I am Autistic :) |
| 23:34.13 | fugitivo | i couldn't live with 75% of stupids |
| 23:34.13 | darkskiez | Did you click the IQ test popup's ? |
| 23:34.36 | f0urtyfive | swm_: Lol I like the address on your webpage |
| 23:34.50 | swm_ | address? |
| 23:35.36 | swm_ | Which one? heh |
| 23:35.45 | f0urtyfive | Address |
| 23:35.45 | f0urtyfive | Digital DataBits Innovations and Services |
| 23:35.45 | f0urtyfive | Oregon |
| 23:35.45 | f0urtyfive | USA |
| 23:35.54 | f0urtyfive | your missing a few essnetial parts :P |
| 23:36.30 | swm_ | Yep that is because I dont provide services to anyone outside my city limits, and the only way someone is going to get the website address is from one of my business cards, so an address is not needed. :) |
| 23:36.51 | f0urtyfive | swm_: BTW who is Jennifer Archer? |
| 23:37.11 | swm_ | That would be my wonderful wife :) |
| 23:37.23 | f0urtyfive | Why does she have a different last name? |
| 23:37.42 | swm_ | Well that depends on where you found the name |
| 23:37.56 | *** join/#asterisk NORANDOMS (n=watchy@adsl-69-152-41-249.dsl.ltrkar.swbell.net) |
| 23:38.27 | swm_ | If you could specifically give me a location of the name I could explain that to you |
| 23:38.31 | fugitivo | is she inside the 75%? |
| 23:38.49 | Qwell | fugitivo: most people are |
| 23:38.55 | Qwell | ...I crack myself up sometimes |
| 23:39.20 | ariel_ | hummm can we really belive those IQ test's |
| 23:39.27 | fugitivo | no |
| 23:39.32 | fugitivo | iq tests are a joke |
| 23:39.45 | swm_ | I really dont trust thier actual number but, that's what I saw |
| 23:39.50 | ariel_ | ahh joke yes |
| 23:39.51 | fugitivo | you can get high results if you practice |
| 23:40.20 | *** join/#asterisk JunK-Y (n=junky@67.71.156.106) |
| 23:40.56 | f0urtyfive | swm: is Ann your mother? |
| 23:41.00 | swm_ | "SAY I IF YOU HAVE COMCAST FOR A INTERNET PROVIDER" |
| 23:41.25 | swm_ | Ann .. Uhh Nope Janet |
| 23:41.47 | f0urtyfive | Hm... |
| 23:41.51 | f0urtyfive | Whos ann then... |
| 23:42.01 | fugitivo | f0urtyfive: are you from the government? |
| 23:42.06 | f0urtyfive | lol |
| 23:42.07 | f0urtyfive | no |
| 23:42.14 | fugitivo | then stop asking personal questions |
| 23:42.23 | JerJer | alas aye |
| 23:42.47 | swm_ | Uhh where you see Ann? lol |
| 23:43.04 | f0urtyfive | swm_: Is yor mothers middle initial L? :P lol |
| 23:43.17 | swm_ | Actually it is :) |
| 23:43.21 | f0urtyfive | found ya! :P |
| 23:43.33 | swm_ | Wow that was hard wasn't it ? |
| 23:43.55 | f0urtyfive | nah just bored |
| 23:44.08 | f0urtyfive | and for some reason theirs a strange number of mcmahons in Oregon :P |
| 23:44.17 | f0urtyfive | stop versioning me will you, its not changing :P |
| 23:44.21 | swm_ | Yeah we came from Ireland |
| 23:44.28 | swm_ | I hold the crest from the castle |
| 23:44.48 | *** join/#asterisk __Elf (n=Elf@elf-laptop.glassfish.net) |
| 23:45.16 | swm_ | it's over 250 lbs |
| 23:45.48 | darkskiez | I'm Irish |
| 23:45.49 | swm_ | I'm the original strain of the mcmahon era, Ed Mcmahon is a inbread piece of shit |
| 23:45.58 | *** join/#asterisk mtc (n=mtc@xdsl-84-44-153-81.netcologne.de) |
| 23:46.04 | mtc | hallo all |
| 23:46.09 | darkskiez | and not like coz my great great great grandfather blah balh blah |
| 23:46.12 | darkskiez | coz I was born there |
| 23:46.24 | swm_ | Wish I was born there |
| 23:46.31 | darkskiez | I'll send you a letterbomb |
| 23:46.35 | darkskiez | make you feel at home |
| 23:46.41 | swm_ | Woo Hoo |
| 23:49.24 | swm_ | darkskiez: what's it like over there in ireland? |
| 23:49.36 | darkskiez | shite, so i moved to scotland |
| 23:50.53 | swm_ | How is scotland? |
| 23:51.02 | darkskiez | Great, so I stayed. |
| 23:51.51 | athoms | ok...i have followed the README.udev made the changes stated. and recompiled zaptel. make clean -> make linux26 -> make install... |
| 23:52.43 | athoms | modprobe ztdummy returns nothing |
| 23:52.55 | JerJer | goood |
| 23:53.00 | *** join/#asterisk newbien (n=e@217.245.33.65.cfl.res.rr.com) |
| 23:53.10 | *** join/#asterisk PupenoL (n=pupeno@200.123.183.89) |
| 23:53.27 | bjohnson | so good, it greats an extra "o" |
| 23:53.54 | swm_ | try lsmod and see if it's loaded |
| 23:54.01 | athoms | lsmod shows ztdummy and zaptel running |
| 23:54.23 | athoms | reloaded asterisk and restarted |
| 23:54.34 | *** part/#asterisk newbien (n=e@217.245.33.65.cfl.res.rr.com) |
| 23:55.10 | athoms | still has same problem...unable to open pseudo device |
| 23:55.19 | athoms | suggestions? |
| 23:56.00 | swm_ | Smoke a bowl and take a break |
| 23:56.03 | darkskiez | do you have the zaptel device in /dev ..what it called again |
| 23:56.13 | swm_ | c somethin |
| 23:56.16 | fugitivo | athoms: did you load the module? |
| 23:56.16 | darkskiez | running asterisk as root ? |
| 23:56.26 | athoms | yes root |
| 23:56.33 | athoms | module is loaded |
| 23:56.34 | darkskiez | check permissions on the zaptel device anyway |
| 23:56.39 | bjohnson | did you mod the loadule? |
| 23:56.53 | darkskiez | did you insmod the ztdummy.o ? |
| 23:56.54 | athoms | shows in lsmod |
| 23:57.34 | darkskiez | sorry, getting carried away there |
| 23:57.41 | *** join/#asterisk mmlj4 (n=looseduk@ip70-171-92-106.no.no.cox.net) |
| 23:58.11 | darkskiez | run make devices |
| 23:58.16 | darkskiez | in your zaptel source dir |
| 23:58.33 | Katty | blah. |
| 23:58.59 | darkskiez | humbug |
| 23:59.00 | athoms | make devices... |
| 23:59.09 | darkskiez | aye |
| 23:59.12 | darkskiez | without the .'s |
| 23:59.39 | mmlj4 | seen manxpower |
