| 00:00.33 | JerJer | um gatekeeper is another port hmm |
| 00:01.17 | *** join/#asterisk ronaldl79 (n=chatzill@c-24-8-54-203.hsd1.co.comcast.net) |
| 00:01.47 | ronaldl79 | WTF!?! Why isn't * loading MeetMe? I have cleaned and recompiled three times now....what gives? |
| 00:02.37 | *** join/#asterisk kingtux (n=kingtux@pool-151-196-251-23.balt.east.verizon.net) |
| 00:02.39 | Ariel_ | how about h323 ata to h323 ata's |
| 00:02.57 | JerJer | are you mad |
| 00:03.09 | hardwire | ... 931 active SIP channels |
| 00:03.11 | wunderkin | insane in the membrane |
| 00:03.12 | hardwire | ugh |
| 00:03.16 | hardwire | all Tx: NOTIFY |
| 00:03.28 | Ariel_ | not me customer I have to prove to him he is and let me finish up the asterisk setup |
| 00:03.45 | hardwire | Ariel_: use a gateway. |
| 00:03.59 | hardwire | also.. if its a single line gateway |
| 00:04.03 | hardwire | tell said customer to get with the times |
| 00:04.08 | hardwire | and get something a little more off the shelf. |
| 00:04.10 | kingtux | Hello alll....I was looking for a good source that would describe what would be needed to start a small voip company, such things like bandwidth,hardware,DID, etc.... |
| 00:04.29 | hardwire | kingtux: there is a book called "Communication Systems" in most libraries |
| 00:04.39 | hardwire | and another called "Telephone Signalling" |
| 00:04.42 | hardwire | big books |
| 00:04.50 | hardwire | I am about to read them.. I suggest you do to :) |
| 00:04.54 | kingtux | is it with using asterisk |
| 00:04.59 | jskcr | anyone read orielly's asterisk book yet |
| 00:05.11 | hardwire | kingtux: that doesn't matter :) |
| 00:05.17 | hardwire | voip != asterisk |
| 00:05.23 | kingtux | his there online referrence i can look through too?? |
| 00:05.36 | jskcr | asterisk chan_sip.c = voip |
| 00:05.37 | hardwire | whats a matter.. got a fine at the library? |
| 00:06.14 | kingtux | rather just read online books |
| 00:06.23 | kingtux | lol |
| 00:06.25 | kingtux | :) |
| 00:07.08 | kingtux | hey is that communication systems book by Simon Haykin |
| 00:07.16 | *** join/#asterisk hparker (n=hparker@gentoo/developer/hparker) |
| 00:07.23 | hardwire | lemme check |
| 00:07.24 | hparker | Evenin all |
| 00:07.45 | hparker | Is there an easy way to diagnose an IAXy not ringing? |
| 00:08.00 | kingtux | Has anyone read the asterisk book |
| 00:08.11 | FuriousGeorge | can i do this exten=> _18[00,66,77,88]NXXXXXX |
| 00:08.17 | Ariel_ | hardwire, I don't want to use h323 at all but I have a customer that is well nuts in my view |
| 00:08.23 | hardwire | FuriousGeorge: on different lines |
| 00:08.36 | FuriousGeorge | hardwire: k |
| 00:08.54 | hardwire | Ariel_: sounds like how I would be |
| 00:08.56 | JerJer | FuriousGeorge: try it |
| 00:09.04 | shyru | any idea, i have auth method on my asterisk box, when i make a call with to LD spa841 does not rules, but i can make a call! but if i make a call over sipura ata 2000 the asterisk ask me for password. Any ideas? |
| 00:09.15 | JerJer | Ariel_: find a new customer then |
| 00:09.19 | hardwire | heh |
| 00:09.25 | Ariel_ | JerJer, yes I am trying to |
| 00:09.28 | hardwire | oh my chansip is so chatty |
| 00:09.52 | hardwire | I wish all of the ERROR and NOTICE subscription warnings and hint warnings were DEBUG |
| 00:10.03 | hardwire | I can hardly use the CLI |
| 00:10.11 | jskcr | hardwire: thats what frontend proxies are for :P |
| 00:10.17 | hardwire | yeh |
| 00:10.46 | paulc | Quickie: Digium PRI card in a Dell PowerEdge 1850 - 3.3v or 5v? |
| 00:11.11 | shyru | :S |
| 00:11.15 | shyru | any? |
| 00:11.16 | JerJer | TE411P |
| 00:11.22 | JerJer | paulc |
| 00:11.58 | paulc | JerJer: Cheers - so TE411P in a PowerEdge 1850 = A Good Thing(tm)? |
| 00:12.18 | JerJer | i run 1750s without any issue |
| 00:12.23 | shyru | :'( |
| 00:13.00 | *** join/#asterisk MikeJ[Laptop] (n=ircatjer@ppp-69-220-37-206.dsl.sfldmi.ameritech.net) |
| 00:13.06 | hardwire | hmm |
| 00:13.18 | hardwire | 4 channels voice + the rest as Data on a T1 |
| 00:13.25 | hardwire | how well will asterisk handle that mofo? |
| 00:13.36 | hardwire | well.. zaptel |
| 00:13.50 | jskcr | hdlc |
| 00:13.52 | Qwell | FuriousGeorge: FYI, if it were only one digit, ie 0, 6, 7, or 8, you could do a range(or list of numbers), like this [0678] or I believe [06-8] - without the commas. If it were [0,6,7,8], somebody could literally dial 18,,1234567 - and it'd work |
| 00:13.57 | jskcr | it handles it fine hardwire |
| 00:13.58 | hardwire | so configure hdlc in ztcfg |
| 00:14.03 | hardwire | and it will make an interface? |
| 00:14.08 | hardwire | via /proc/net/dev |
| 00:14.32 | kingtux | what os us guys running astersik on ? |
| 00:14.41 | Qwell | FuriousGeorge: I've said this quite a few times, and I think I might actually try to implement this. It would be nice if there were a pattern match char that said "match whatever the previous digit was" |
| 00:14.42 | hardwire | the tuxy one |
| 00:14.46 | kingtux | i'm about to do a new install on centos 4.0 |
| 00:14.54 | paulc | JerJer: 1750 != 1850.. Digium's compatibility page references the 1850 (NIC issues seem to be the only "issue").. others have whispered "sangoma!" in my direction.. not looking for a flame war, I'd rather go with Digium hardware.. but ultimately this is for a customer, they're sourcing it all, and want it to work with the minimal amount of hassle.. |
| 00:15.28 | hardwire | FuriousGeorge: think if , as || in an if statement |
| 00:15.44 | hardwire | wait |
| 00:15.45 | hardwire | no |
| 00:15.47 | hardwire | thats wrong |
| 00:16.18 | hardwire | 379M -rw-r--r-- 1 root root 379M 2005-09-29 16:16 full |
| 00:16.19 | hardwire | ugh |
| 00:16.23 | hardwire | that was 2.1 gigs yesterday |
| 00:16.45 | jskcr | hardwire: read http://www.voip-info.org/tiki-print.php?page=Asterisk+Data+Configuration |
| 00:17.01 | hardwire | thanks jskcr |
| 00:17.03 | jskcr | no |
| 00:17.06 | jskcr | prob :) |
| 00:17.09 | hardwire | o |
| 00:17.09 | hardwire | k |
| 00:17.10 | hardwire | freak |
| 00:17.34 | hardwire | now to finger out why restart when convenient never works |
| 00:18.03 | ronaldl79 | Hey guys...'no rule to make target 'modules'. Stop' .... is that bad news? |
| 00:18.21 | jskcr | anyone using asterisk with a IntelĀ® Desktop Board D915GAG |
| 00:18.28 | ronaldl79 | That's what I'm getting when I 'make install' zaptel |
| 00:18.33 | hardwire | ronaldl79: building zaptel? |
| 00:18.34 | hardwire | heh |
| 00:18.41 | hardwire | install your linux source |
| 00:18.42 | ronaldl79 | Yes, hardwire, is that common? |
| 00:18.49 | hardwire | or headers |
| 00:18.51 | hardwire | or whatever |
| 00:18.54 | jskcr | I just got intel em64t 64 bit p4 processors today |
| 00:18.57 | ronaldl79 | Well, that's the thing, I thought it already was...hmmmm |
| 00:19.09 | hardwire | jskcr: and you have nowhere to put it? |
| 00:19.31 | jskcr | hardwire: I have a D915GAG that supports it :) |
| 00:20.07 | hardwire | is that supposed to impress me? |
| 00:20.10 | hardwire | cause it does |
| 00:20.17 | hardwire | I am still socket 478 |
| 00:20.23 | hardwire | I tried to move over to the new LGA socket |
| 00:20.26 | hardwire | but.. I just can't do it |
| 00:20.33 | hardwire | to many funky PCI busses once you move over |
| 00:20.42 | *** join/#asterisk Cresl1n (n=matt@gateway.digium.com) |
| 00:20.58 | hardwire | http://www.intel.com/design/motherbd/ag/pix/d915gag_lg.jpg |
| 00:21.01 | hardwire | that looks almost rendered |
| 00:21.46 | Qwell | hardwire: parts of it were, I'd say |
| 00:21.48 | hardwire | that is the most simple mainboard I have ever seen |
| 00:21.52 | jskcr | there is the allways trusty pci=noacpi kernel line :) |
| 00:22.18 | *** join/#asterisk peggerr (i=pegasus@lain.ziaspace.com) |
| 00:22.22 | hardwire | join_queue: no queue_members defined in your config (extconfig.conf). |
| 00:22.24 | hardwire | well thats new |
| 00:22.56 | Qwell | on that exact board, they screwed up on the speaker jack casing |
| 00:23.03 | peggerr | what am i doing wrong if chan_iax2.c:5761 socket_read: Rejected connect attempt from 69.25.143.141, request '16178303190@default' does not exist appears |
| 00:23.03 | hardwire | heh |
| 00:23.15 | hardwire | tried the wiki> |
| 00:23.17 | Qwell | its missing the backing of it |
| 00:23.32 | paulc | peggerr: do you have an extension 1617.... in your "default" context |
| 00:25.21 | peggerr | paulc i am not sure what you mean by default context but i do not have any 1617 in the extensions.conf where do you see 1617? |
| 00:25.30 | hardwire | logger.conf |
| 00:25.31 | hardwire | wonderfull |
| 00:25.43 | file[laptop] | paulc: lemme take this... |
| 00:25.44 | hardwire | forgot I could change what goes to the console |
| 00:26.02 | file[laptop] | peggerr: extension 16178303190 does not exist in the context default, therefore Asterisk is not psychic and can't do anything with it |
| 00:26.03 | paulc | peggerr: What it's telling you is that a call's coming in, for extension 16178303190, and the context it's looking in is called "default".. |
| 00:26.24 | Qwell | thats an outgoing error, isn't it? |
| 00:26.52 | Qwell | nm, tired |
| 00:27.06 | file[laptop] | you're insaned |
| 00:27.14 | paulc | peggerr: To resolve, either create that extension in the "default" context.. or change the context for other end of the IAX connection and make sure that extension exists in that context.. |
| 00:27.28 | peggerr | paulc how do i get that aix did to be passed to the extensions.conf so it is handled properly |
| 00:28.00 | peggerr | paulc i think i understna dnow |
| 00:28.01 | paulc | set context=<insert name here> in iax.conf (as a default) or in a specific user/peer [section] if it's just to apply to that one user/peer |
| 00:28.03 | timecop | god damn |
| 00:28.09 | timecop | why is the fucking makefile still not fixed in zaptel |
| 00:28.15 | timecop | if there's no fucking conf.modules or modules.conf |
| 00:28.19 | timecop | stop makign it fail |
| 00:28.19 | Qwell | timecop: because you broke it |
| 00:28.21 | timecop | no |
| 00:28.26 | Qwell | its your fault |
| 00:28.29 | paulc | I gotta go.. to return later.. JerJer thanks for your help, peggerr good luck! :-) |
| 00:28.45 | timecop | <PROTECTED> |
| 00:28.46 | timecop | this hsit |
| 00:28.59 | timecop | ther'es no default case |
| 00:29.02 | Qwell | timecop: Did you not see the "if [ `hostname` == "gnaa" ]; then "echo haha, you suck"; fi" line? |
| 00:29.14 | timecop | for when it make the modconf variable |
| 00:29.18 | peggerr | paulic i have it rejistred and stuff under iax.conf so no if i jut go to extensions.conf and put that number in as a extension it should work, i was a little confused because it is not really an extension but a DID |
| 00:29.22 | timecop | for people who dont fucking use queer module autoloading |
| 00:29.31 | Qwell | Do you know what -f does? |
| 00:29.39 | Qwell | if file exists, do this |
| 00:29.43 | riksta | how do you eaves drop on conversations realtime? |
| 00:29.53 | Qwell | if its hitting the then, well...obvious |
| 00:29.57 | *** join/#asterisk copyofJohan (i=johan@c204057.adsl.hansenet.de) |
| 00:30.01 | Qwell | riksta: chan_spy, or whatever its called |
| 00:30.05 | timecop | Qwell: DO YOU KNOW THAT IF THAT VARIABLE ISNT SET IT TURNS INTO if [ -f ]; then FUCKIGN FAIL |
| 00:30.06 | riksta | thanks |
| 00:30.19 | Qwell | timecop: so fix it? |
| 00:30.21 | file[laptop] | timecop: don't do that, very very rude |
| 00:30.26 | riksta | Qwell: work with 1.09? |
| 00:30.29 | timecop | Qwell: its bene broken for at least a YEAR |
| 00:30.32 | Qwell | riksta: got me |
| 00:30.32 | timecop | why is it NOT FIXED still |
| 00:30.35 | Qwell | timecop: Then fix it |
| 00:30.50 | file[laptop] | report a bug with a fix, or atleast report a bug, or if one exists - comment on it |
| 00:32.03 | *** join/#asterisk joe (n=nnnnnjsa@ip66-107-33-195.z33-107-66.customer.algx.net) |
| 00:32.17 | rayvd | unacceptable! >:o |
| 00:33.18 | timecop | im just gonna make a new bug |
| 00:33.52 | kingtux | are u guys running AMP |
| 00:33.54 | kingtux | to configure |
| 00:34.17 | peggerr | would exten => 16178303190 ,1,Answer() be the proper command to pick up that did |
| 00:34.31 | file[laptop] | peggerr: and do what with it? |
| 00:34.35 | file[laptop] | just answer? |
| 00:35.05 | timecop | http://bugs.digium.com/view.php?id=5337 |
| 00:35.26 | peggerr | file[laptop] yes i would like to start with answering it |
| 00:36.37 | peggerr | i am still getting the Rejected connect attempt from 69.25.143.141, request '1 after putting the exten => 16178303190 ,1,Answer() IN |
| 00:37.11 | peggerr | what did i miss? |
| 00:37.26 | Qwell | haha, timecop: you suck. The fix is to just put the shit in quotes. |
| 00:37.36 | file[laptop] | peggerr: did you do an extensions reload? |
| 00:37.52 | peggerr | file[laptop] yes I did |
| 00:38.17 | timecop | Qwell: remove the file and run make install. |
| 00:38.28 | timecop | the fix is THE VARIABLE NEVER GETS ASSIGNED SO IT FUCKING FAILS. |
| 00:38.43 | *** join/#asterisk AlexCTI (n=alex@weston-69.65.86.197.myacc.net) |
| 00:38.49 | Qwell | timecop: [ if -f ] works. [ if -f "" ] does not. |
| 00:38.56 | Qwell | The fix, as I said, is to simply wrap the var in quotes |
| 00:39.06 | Qwell | want me to post a patch? |
| 00:39.26 | timecop | <PROTECTED> |
| 00:39.29 | timecop | this is the line that fails |
| 00:39.34 | FuriousGeorge | on a scale of 0 to 1, i had to resample the mp3's on aussievoip to .00008 aplitude, and now they are almost not unacceptably loud |
| 00:39.34 | timecop | its NOT IN QUITES |
| 00:39.37 | timecop | QUOTES |
| 00:39.40 | AlexCTI | Hi some know how stop asterisk if the instruction "STOP NOW" doesn't work into the CLI? |
| 00:39.41 | timecop | so according to YOU |
| 00:39.43 | timecop | it should have worked. |
| 00:39.50 | timecop | you fucking fail i.t |
| 00:39.57 | timecop | <Qwell> timecop: [ if -f ] works. [ if -f "" ] does not. |
| 00:39.59 | Qwell | If it were in quotes... |
| 00:40.01 | timecop | clearly it doesnt. |
| 00:40.13 | Qwell | by "works" I mean "passes test" |
| 00:40.18 | rayvd | why are you even helping him Qwell? |
| 00:40.22 | timecop | uh |
| 00:40.25 | AlexCTI | it make reload and show reloading |
| 00:40.27 | ronaldl79 | Okay, I need help -- why is Asterisk ignoring MeetMe at compile??? This the fourth time I've recompiled to experience the same result. |
| 00:40.48 | timecop | anyway the failure is in mv |
| 00:40.48 | wunderkin | ronaldl79: no hardware? |
| 00:40.49 | Qwell | timecop: if [ -f "$(MODCONF)" ]; then mv -f $(MODCONF) $(MODCONF).bak ; fi |
| 00:40.51 | Qwell | There you go |
| 00:40.53 | timecop | not in [ anyway. |
| 00:41.00 | Qwell | try that |
| 00:41.16 | peggerr | for Rejected connect attempt from 69.25.143.141, request '16178303190@default' does not exist is 16178303190 or whe whole 16178303190@default? |
| 00:41.20 | *** join/#asterisk frenzy (n=frenzy@193.220.82.108) |
| 00:41.21 | ronaldl79 | wunderkin : It has loaded just fine in the past w/o hardware -- I wanted to use MeetMe, so I setup to install ztdummy. Still nothing. |
| 00:41.37 | frenzy | can someone please help me... |
| 00:41.40 | frenzy | I'm connected to asterisk remotely |
| 00:41.42 | timecop | Qwell: it errors out after " mv -f .bak " |
| 00:41.43 | wunderkin | ronaldl79: yeah.. so you have ztdummy compiled and its loaded? |
| 00:41.47 | frenzy | and I get a bunch of chan_sip.c:4836 check_auth: Stale nonce received from |
| 00:41.48 | timecop | since the variable IS NOT ASSIGNED |
| 00:41.57 | Qwell | BECAUSE the variable, as you said, IS NOT ASSIGNED |
| 00:42.00 | frenzy | and my ATA disconnected |
| 00:42.01 | timecop | yeah |
| 00:42.01 | Qwell | if you wrap it in quotes... |
| 00:42.03 | frenzy | disconnects** |
| 00:42.03 | Qwell | dumbass |
| 00:42.09 | Qwell | I'm done. Be an idiot. |
| 00:42.23 | *** part/#asterisk copyofJohan (i=johan@c204057.adsl.hansenet.de) |
| 00:42.25 | hardwire | damnit |
| 00:42.38 | frenzy | ? |
| 00:42.41 | timecop | Qwell: just fixing it there wont work |
| 00:42.47 | hardwire | Sep 29 16:42:35 ERROR[14597] app_queue.c: no queue_members defined in your config (extconfig.conf). |
| 00:42.47 | hardwire | Sep 29 16:42:35 WARNING[14597] app_queue.c: Unable to join queue '1130' |
| 00:42.50 | AlexCTI | timecop, do you know how can i stop it? I need change the MOH |
| 00:42.51 | hardwire | am I insane? |
| 00:42.59 | *** join/#asterisk cced (n=dev2003@222.33.36.205) |
| 00:43.07 | ronaldl79 | yeah, wunderkin |
| 00:43.13 | timecop | Qwell: they jsut need to do a IF THERE IS NO FUCKING MODULES.CONF SKIP THAT WHOLE SHIT. |
| 00:43.14 | hardwire | show queues shows.. all the queues.. all 10 of them |
| 00:43.21 | Qwell | timecop: So do that |
| 00:43.23 | cced | who is familiar with tormenta2.vhd? |
| 00:43.24 | timecop | because even fixing that if case will generate more errors later. |
| 00:43.28 | Qwell | quit bitching about it. It's a simple fix |
| 00:43.36 | wunderkin | ronaldl79: ztdummy shows in lsmod? ok... well did you compile zaptel first then asterisk? make sure you do it in that order |
| 00:43.46 | frenzy | anyone ? |
| 00:44.00 | peggerr | why is my connecting still being rejected even though i have exten => 16178303190 ,1,Answer() in my extensions.conf??? |
| 00:44.05 | ronaldl79 | I ddin't initially, wunderkin, but then I cleaned up everything...and compiled zaptel first, etc....still no go. |
| 00:44.13 | frenzy | Keep getting "chan_sip.c:4836 check_auth: Stale nonce received from " and my ata disconnects and reconnects |
| 00:44.16 | file | peggerr: don't put a space |
| 00:44.48 | *** join/#asterisk file[tau] (n=jcolp@mctnnbsa31w-142166116178.nb.aliant.net) |
| 00:44.57 | wunderkin | ronaldl79: make sure when you are compiling asterisk it says something about zapata and moh |
| 00:44.59 | kingtux | are u guys using AMP to configure your systems, haven't used wondering how good it is |
| 00:45.00 | kingtux | ?? |
| 00:45.29 | timecop | im using vi to configure my systems. |
| 00:45.57 | kingtux | wondering if i should try to use amp?? |
| 00:45.58 | ronaldl79 | wunderkin ... does ztdummy need to be modprobe'd before compiling *??? |
| 00:45.59 | Darwin35 | why use amp why not get off you lazy but and learn read and understand the config files |
| 00:46.02 | kingtux | if its any good |
| 00:46.05 | Darwin35 | and edit them to your needs |
| 00:46.18 | Darwin35 | amp is for the lazy |
| 00:46.21 | frenzy | chan_sip.c:4836 check_auth: Stale nonce ??? |
| 00:46.24 | rayvd | AMP makes a messy dial plan. |
| 00:46.26 | kingtux | Like i said i've been using vi for the past year |
| 00:46.29 | rayvd | Pays off to learn to do it by hand. |
| 00:46.33 | wunderkin | ronaldl79: no it just needs to be installed first, it checks the includes for zaptel.c |
| 00:46.35 | peggerr | file the space between the extension and the priority?? |
| 00:46.38 | wunderkin | er h |
| 00:46.40 | kingtux | just wondiring if it is anygood |
| 00:46.46 | Darwin35 | no it sucks |
| 00:46.49 | peggerr | file i took that out and still no diffrence |
| 00:46.51 | Darwin35 | there is your answer |
| 00:46.51 | rayvd | Ehh, I didn't like it. |
| 00:46.59 | timecop | related to bug http://bugs.digium.com/view.php?id=5178 |
| 00:47.02 | file[tau] | peggerr: use exten => 16178303190,1,Answer |
| 00:47.05 | timecop | just stop fuckign with modules.conf |
| 00:47.08 | kingtux | wow do u need to blow some steam off darwin35 |
| 00:47.10 | Darwin35 | learn the .conf files and edit them by hand |
| 00:47.12 | timecop | beset solution. |
| 00:47.28 | file[tau] | peggerr: do a show dialplan and make sure it's there |
| 00:47.30 | peggerr | file[tau] so no () at the end? |
| 00:47.32 | Darwin35 | if you want a good extensions.conf to learn from let me know |
| 00:47.46 | kingtux | let me see what u got |
| 00:47.54 | file[tau] | peggerr: doesn't matter |
| 00:47.59 | ronaldl79 | wunderkin....do I need a symlink to the source as well? The current one seems to be out of whack. |
| 00:48.03 | *** part/#asterisk hparker (n=hparker@gentoo/developer/hparker) |
| 00:48.20 | wunderkin | ronaldl79: yes to your kernel source |
| 00:48.36 | AlexCTI | Hi.. My asterisk do not respond to the command STOP NOW, anyone know how fix it? |
| 00:48.44 | kingtux | what client are u guys using to chat on |
| 00:48.45 | kingtux | ?? |
| 00:48.47 | Darwin35 | http://pastebin.ca/23045 there is a good starting point read and learn |
| 00:48.51 | peggerr | file[tau] what what is wrong what does exten => 16178303190,1,Answer not work? |
| 00:49.28 | file[tau] | peggerr: do a show dialplan and make sure it's really there, and make sure that is the extension it's really dialing - not every provider puts a 1 in front |
| 00:49.47 | kingtux | isn't that example make with the make examples command |
| 00:50.01 | hardwire | there is no god |
| 00:50.09 | ronaldl79 | ln -s etc, right, wunderkin? |
| 00:50.31 | ronaldl79 | Some things I rarely use in Linux...so I don't remember them... |
| 00:50.37 | Darwin35 | I use kvirc andxchat |
| 00:50.38 | wunderkin | ronaldl79: yeah ln-s /usr/src/blah /usr/src/linux i think |
| 00:50.48 | peggerr | file[tau] it actully looks like a old one for some reason |
| 00:51.12 | Darwin35 | turn off musiconhold if you dont have timing |
| 00:51.42 | Darwin35 | and any other feature you dont need |
| 00:51.58 | Darwin35 | re read your extensions.conf and look for text errors. |
| 00:52.16 | hardwire | again I repeat |
| 00:52.17 | hardwire | there is no god |
| 00:52.18 | Darwin35 | killall -9 asterisk and do a asterisk -vvvvvvvvvvvvvgc |
| 00:52.41 | AlexCTI | ok |
| 00:52.45 | Darwin35 | Hardwire no there is no god but there is a higherpower |
| 00:52.58 | peggerr | show dialplan show how up in the same order that extensions.conf is set up correct? |
| 00:53.00 | Darwin35 | and he is kicking your butt |
| 00:53.13 | kingtux | downloading asterisk book now |
| 00:53.19 | kingtux | see what its all about |
| 00:53.21 | AlexCTI | how turn off the music on hold? |
| 00:53.29 | Darwin35 | moh.conf |
| 00:53.30 | jmg | yay we have extensions working |
| 00:53.47 | Qwell | AlexCTI: taking the call off hold will turn it off |
| 00:54.42 | peggerr | file[tau] it shows up http://pastebin.com/378319 |
| 00:54.54 | AlexCTI | ok |
| 00:55.30 | file[tau] | peggerr: okay and on the CLI when a call comes in to that, what do you see |
| 00:55.34 | hardwire | http://bugs.digium.com/view.php?id=5300#bugnotes |
| 00:55.37 | hardwire | how do I rant about this? |
| 00:56.00 | MikeJ[Laptop] | hardwire, what's up? |
| 00:56.07 | timecop | by not using mysql |
| 00:56.13 | *** join/#asterisk spackle (n=spackle@209.234.83.19) |
| 00:56.14 | Darwin35 | dress up in your moms best dress and heals and stomp around the room and pull your hair out |
| 00:56.24 | peggerr | file[tau] this is what i see http://pastebin.com/378321 |
| 00:56.32 | Darwin35 | make sure to videotape it |
| 00:56.42 | Qwell | hardwire: add a note? |
| 00:56.53 | file[tau] | oh I see |
| 00:56.59 | peggerr | what? |
| 00:57.02 | file[tau] | peggerr: you have it in the wrong context :P you didn't put it in the default one |
| 00:57.12 | file[tau] | it's trying to look for it in [default] |
| 00:57.16 | peggerr | default one? |
| 00:57.25 | file[tau] | but you have it in [16178303190] |
| 00:57.28 | MikeJ[Laptop] | Pegger, [default] |
| 00:58.12 | Darwin35 | you have to set your context to point to the inbound for your calls |
| 00:58.19 | file[tau] | MikeJ[Laptop]: pop quiz - what's record routing? |
| 00:58.33 | Darwin35 | default is [default] but many people change it to inbound |
| 00:58.33 | peggerr | so like this http://pastebin.com/378323 |
| 00:58.55 | Darwin35 | yeahh but no |
| 00:58.56 | MikeJ[Laptop] | hardwire, what's up w/ 5300? |
| 00:59.26 | hardwire | I had an issue where if I had a standard queues.conf 1w no realtime |
| 00:59.30 | hardwire | CVS HEAD as of an hour ago |
| 00:59.30 | Darwin35 | that will anser it but if you want to pont it some where else the you use a Goto |
| 00:59.40 | hardwire | it wouldn't use the queues.conf assigned queue |
| 00:59.43 | MikeJ[Laptop] | did you try the new patch on that bug |
| 00:59.47 | hardwire | it expected realtime or nothing |
| 00:59.47 | hardwire | so |
| 00:59.49 | hardwire | I patched it |
| 00:59.51 | hardwire | and it works now |
| 00:59.51 | hardwire | so |
| 00:59.55 | hardwire | push that mofo into CVS |
| 01:00.02 | file[tau] | stop talking like that |
| 01:00.07 | file[tau] | you're talking like my boss, it's scary |
| 01:00.14 | hardwire | he says mofo? |
| 01:00.22 | MikeJ[Laptop] | file, record-route? |
| 01:00.29 | file[tau] | no he spreads stuff out over several lines |
| 01:00.34 | file[tau] | I think |
| 01:00.34 | Darwin35 | all boss are scary the controll you and your life line called a paycheck |
| 01:00.35 | file[tau] | we |
| 01:00.35 | file[tau] | need to |
| 01:00.36 | file[tau] | fix |
| 01:00.37 | file[tau] | the broken |
| 01:00.38 | file[tau] | stuff |
| 01:00.38 | MikeJ[Laptop] | you mean the thing that says --> Go this way cuz i say so? |
| 01:00.47 | hardwire | I am enter happy |
| 01:00.48 | hardwire | damnit |
| 01:00.51 | hardwire | I like to be enter happy |
| 01:01.02 | hardwire | IT GIVES ME SELF WORTH! |
| 01:01.02 | Darwin35 | hardwire take your thorazine |
| 01:01.04 | hardwire | :) |
| 01:01.05 | file[tau] | MikeJ[Laptop]: sorta, makes sure that subsequent messages travel the same path - like when going through a proxy so it can keep call state and stuff |
| 01:01.16 | Qwell | file[tau]: I think all bosses do that. Mine does too |
| 01:01.17 | hardwire | MikeJ[Laptop]: I well.. totally approve of that incredibly simple patch |
| 01:01.31 | Qwell | file[tau]: at least yours isn't exclamation mark happy... |
| 01:01.33 | MikeJ[Laptop] | yeah, like I said, go this way cuz I say |
| 01:01.36 | hardwire | !!!!!!!!! |
| 01:01.48 | file[tau] | !!!???wtf |
| 01:02.06 | Qwell | hardwire: I've seen emails from my former boss...I believe we counted 32 exclamation marks...on one sentence |
| 01:02.13 | MikeJ[Laptop] | hardwire, can you post confirmation that the patch works on mantis please. |
| 01:02.13 | hardwire | wow |
| 01:02.16 | hardwire | it was really important |
| 01:02.28 | hardwire | MikeJ[Laptop]: happy to.. how do I do that.. I have an account on mantis |
| 01:02.31 | *** join/#asterisk Kyreeth (n=ashley@aquila.feathers.net) |
| 01:02.33 | hardwire | oh |
| 01:02.33 | hardwire | log |
| 01:02.33 | hardwire | in |
| 01:02.59 | MikeJ[Laptop] | that helps |
| 01:03.08 | file | just slightly |
| 01:03.11 | Darwin35 | http://pastebin.ca/23045 there is a good starting point read and learn |
| 01:03.29 | *** join/#asterisk kingtux (n=kingtux@pool-151-196-251-23.balt.east.verizon.net) |
| 01:03.50 | kingtux | are you guys running asterisk in a large enviroment?? |
| 01:04.01 | jskcr | how the hell did intel send me a javascript popup when I had it disabled :/ |
| 01:04.04 | file | large is relative |
| 01:04.38 | kingtux | plus 1000 phones |
| 01:04.39 | kingtux | ?? |
| 01:05.03 | Darwin35 | we have over 50,000 clients |
| 01:05.14 | jskcr | kingtux: your entering the realm of paid support :) |
| 01:05.29 | hardwire | MikeJ[Laptop]: posted |
| 01:05.38 | hardwire | I feel important. |
| 01:05.40 | Darwin35 | providers shold charge for support |
| 01:05.44 | kingtux | Darwin35 on many servers do u have |
| 01:06.14 | MikeJ[Laptop] | hard |
| 01:06.19 | MikeJ[Laptop] | hardwire, thanks |
| 01:06.19 | hardwire | wire |
| 01:06.30 | MikeJ[Laptop] | yes... hit enter too soon |
| 01:06.38 | Qwell | you fat fingered a w? |
| 01:06.47 | hardwire | heh |
| 01:06.50 | Darwin35 | 6 blade systems with 6 blades in each unit |
| 01:06.57 | hardwire | he skipped 4 letters completely |
| 01:06.59 | *** join/#asterisk wolfson (n=hehe@usr-kdh-208-6-58-26.beachlink.com) |
| 01:07.07 | Darwin35 | all running fbsd and asterisk in realtime |
| 01:07.08 | hardwire | not as talented as I am.. skipping entire sentances. |
| 01:07.14 | Qwell | hardwire: about 10 by my count |
| 01:07.18 | hardwire | Darwin35: that would be a fun setup |
| 01:07.29 | kingtux | asterisk in realtime?? what do u mean |
| 01:07.36 | hardwire | I really want to get a blade setup and start colocating some PBX's here in town and in Hawaii |
| 01:07.42 | hardwire | town == Anchorage |
| 01:07.56 | jskcr | hardwire would you like a irc spell checker :) |
| 01:07.57 | blitzrage | alaska! |
| 01:08.05 | kingtux | so u manage all these clients with out an interface |
| 01:08.08 | blitzrage | I might be going up there at some point |
| 01:08.11 | hardwire | jskcr: don't you pick on me |
| 01:08.24 | jskcr | hardwire: Im being serious I wrote a script for it |
| 01:08.29 | hardwire | oh poo |
| 01:08.30 | Darwin35 | look at asterisk realtime |
| 01:08.36 | hardwire | jskcr: x-chat? |
| 01:08.40 | Darwin35 | at a cli show realtime |
| 01:09.17 | Darwin35 | we use postgress for oud db with odbc and thus far it has had no issues |
| 01:09.27 | Qwell | irc spell checker that segfaults |
| 01:09.34 | hardwire | Darwin35: that do nothing here. |
| 01:09.42 | Qwell | awesome...bet he'll never spell THAT word wrong again.. |
| 01:09.56 | hardwire | Darwin35: but I have no databases here. |
| 01:10.01 | Darwin35 | read about realtime in the wiki |
| 01:10.05 | Darwin35 | ok |
| 01:10.08 | Darwin35 | why not |
| 01:10.13 | Darwin35 | you should |
| 01:10.15 | hardwire | hey |
| 01:10.17 | hardwire | you talking |
| 01:10.19 | hardwire | like me |
| 01:10.29 | Darwin35 | llearn what asterisk can really do once you go database |
| 01:10.42 | hardwire | getting there slowly |
| 01:10.44 | hardwire | going to move sip peers in |
| 01:10.51 | MikeJ[Laptop] | Darwin35, you type to much |
| 01:10.56 | hardwire | then get sip peer provisioning into it. |
| 01:11.02 | Darwin35 | slow will get you there but move faster the a tortis ok |
| 01:11.03 | kingtux | looks good darwin |
| 01:11.15 | hardwire | wtf? |
| 01:11.54 | kingtux | u have to run cvs to run realtime |
| 01:11.57 | kingtux | ?? |
| 01:12.02 | MikeJ[Laptop] | hardwire, with Darwin35, we follow a firm don't ask, don't tell policy! |
| 01:12.46 | Darwin35 | because Darwin does not use linux |
| 01:12.56 | Darwin35 | Darwin uses FreeBSD |
| 01:13.06 | Darwin35 | and there for its not a supportedplatform |
| 01:13.20 | Darwin35 | you can lick my nuts on that |
| 01:13.30 | Darwin35 | it should be supported by now |
| 01:13.44 | Darwin35 | enough providers are using it |
| 01:14.01 | *** join/#asterisk jskcr (n=jskcr@unaffiliated/jskcr) |
| 01:14.45 | MikeJ[Laptop] | Darwin35, I use windows, SO? |
| 01:14.49 | MikeJ[Laptop] | :P |
| 01:15.01 | Qwell | real men run * on beos...everybody knows that |
| 01:15.11 | *** join/#asterisk iq (n=iq@204-26-72-141.omah.qwest.net) |
| 01:15.27 | *** join/#asterisk goatmilk (n=goatmilk@130-127-45-11.chouse.resnet.clemson.edu) |
| 01:15.40 | jskcr | here ya go hardware a spell checker for irc http://pastebin.ca/24270 |
| 01:15.50 | MikeJ[Laptop] | I need that! |
| 01:15.56 | Darwin35 | do you use asterisk on windows |
| 01:16.17 | MikeJ[Laptop] | Darwin35, ummmm |
| 01:16.17 | Darwin35 | if you do you should be shot |
| 01:16.23 | MikeJ[Laptop] | welll |
| 01:16.31 | MikeJ[Laptop] | not in production |
| 01:16.40 | MikeJ[Laptop] | I do dev on my windows laptop tho |
| 01:16.41 | Darwin35 | I know some one ported it. |
| 01:16.50 | Darwin35 | I heard about it |
| 01:17.17 | jskcr | I need to find a decent grammar checker for my irc spell checking script :) |
| 01:17.18 | Darwin35 | but being really linux and fbsd are so close it should be a supported platform by now |
| 01:17.25 | Darwin35 | thats my issue |
| 01:17.40 | Darwin35 | but aslong as I am alive I will help keep it ported |
| 01:17.57 | MikeJ[Laptop] | Darwin35, and interix (windows services for unix) is basically bsd... |
| 01:18.09 | MikeJ[Laptop] | it is supported as the community will support it. |
| 01:18.19 | jskcr | MikeJ[Laptop]: Microsoft is getting rid of windows services for unix |
| 01:18.28 | MikeJ[Laptop] | digium does not have the resources to provide suport for it. |
| 01:18.46 | MikeJ[Laptop] | jskcr, they just added some pretty huge enhancements to it.. |
| 01:18.55 | MikeJ[Laptop] | where did you hear it;s going away? |
| 01:19.03 | Nugget | slashdot, of course, so it must be true. |
| 01:19.05 | drumkilla | i read that on slashdot, i think |
| 01:19.07 | drumkilla | ha |
| 01:19.08 | jskcr | yup |
| 01:19.37 | jskcr | They are end of life'ing it |
| 01:19.39 | *** join/#asterisk spootnick (n=irc@CPE-144-133-122-102.nsw.bigpond.net.au) |
| 01:20.27 | jskcr | Everyone got there pci-express video card to be able to run windows vista or as I like to call it windows oh shit theres no hardware that can run it yet so lets delay it again |
| 01:20.27 | Dr_Ray | it's just warning you that it won't be around 3 years from now |
| 01:20.37 | hardwire | crap |
| 01:20.41 | hardwire | I need to move cdr-csv to mysql |
| 01:20.46 | MikeJ[Laptop] | SFU 3.5 will continue to be supported until 2011 and will have extended support until 2014. From what the article hints at, Microsoft wants Unix interoperability integrated into the OS. Microsoft says that this integration couldn't be done with past architectures." |
| 01:20.53 | spootnick | is it just a matter of putting 'voicemail => mysql,asterisk,voicemail_users' in extconfig.conf to make voicemail work? i added an entry over there for a voicemail account, but it keeps complaining there's no entry in the voicemail.conf file |
| 01:20.54 | hardwire | oh.. poop.. there are commands for this |
| 01:21.28 | MikeJ[Laptop] | sounds like they will be building more posix API's into base OS, and another 5 yrs or so it won't be necessary. |
| 01:22.08 | Dr_Ray | Vista has a chance to really be something... but then again so did 95... |
| 01:22.15 | Darwin35 | Windows needs to EOL |
| 01:22.18 | jskcr | Thats the only product microsoft has come out with since dos 3 that I like |
| 01:22.21 | Darwin35 | MS needs to EOL |
| 01:22.29 | Darwin35 | Microshaft |
| 01:23.30 | MikeJ[Laptop] | sigh |
| 01:23.45 | jskcr | yea and while IBM supports linux, at the same time they are microsluts #2 customer |
| 01:23.57 | Dr_Ray | I liked 95 and 2000, the rest is kind of meh |
| 01:24.21 | hardwire | jskcr: can't sell what people don't want. |
| 01:24.25 | hardwire | you know what I am saying? |
| 01:24.27 | Nugget | I dunno. 95 and 98 were meh. Me was pretty awful. But 2K and XP are pretty solid. |
| 01:24.40 | Qwell | ME was more then "pretty awful" |
| 01:24.47 | Qwell | Thats like...the understatement of the year |
| 01:24.47 | jskcr | hardwire: yes you can they have been doing it for years |
| 01:24.49 | Dr_Ray | I compared 95 against 3.11, which stunk on ice |
| 01:25.03 | Nugget | I went to 95 from OS/2, hence the meh. :) |
| 01:25.06 | hardwire | jskcr: people.. not you :) |
| 01:25.11 | Dr_Ray | yeah, that would depress me |
| 01:25.14 | Dr_Ray | OS/2 was nie |
| 01:25.16 | Dr_Ray | er, nice |
| 01:25.30 | hardwire | everybody and their dog nowadays has known since .. birth .. that microsoft is the operating system computers use. |
| 01:25.32 | jskcr | I really liked deskview |
| 01:25.33 | hardwire | and thats that |
| 01:25.35 | Darwin35 | OS/2 was king of the world for its time |
| 01:25.41 | Darwin35 | they still make the server ver |
| 01:25.44 | Nugget | desqview kicked ass. |
| 01:25.48 | Darwin35 | just not the client |
| 01:26.01 | BhaalWK | Anyone know of a small php/mysql asterisk billing system which would be suitable for a share house environment which has multiple sip fones? |
| 01:26.13 | Darwin35 | os/2 5.0 did os/2 in |
| 01:26.13 | BhaalWK | pref something open source |
| 01:26.13 | Nugget | http://slacker.com/photos/media/desqview |
| 01:26.16 | jskcr | It was desqview, microshit 3.11 and os/eew |
| 01:26.26 | ronaldl79 | Perhaps I'm missing something, or am just tired...but what's happening here...... |
| 01:26.27 | jskcr | desqview was the fashizzlenit |
| 01:26.28 | peggerr | i just got my asterisk to pick up on a iax DID how do i pass that extension to other extensions in the extensions.conf??? |
| 01:26.40 | ronaldl79 | Makefile:171: target `ztdummy.o' given more than once in the same rule. |
| 01:26.48 | ronaldl79 | make -C /lib/modules/2.6.13-8-default/build SUBDIRS=/usr/src/zaptel modules |
| 01:26.57 | ronaldl79 | make[1]: Entering directory `/usr/src/linux-2.6.13-8-obj/i386/default' |
| 01:27.05 | ronaldl79 | make[1]: *** No rule to make target `modules'. Stop. |
| 01:27.12 | ronaldl79 | make[1]: Leaving directory `/usr/src/linux-2.6.13-8-obj/i386/default' |
| 01:27.19 | ronaldl79 | make: *** [linux26] Error 2 |
| 01:27.21 | Qwell | ~pb |
| 01:27.23 | jbot | methinks pastebin is a place to paste your stuff without flooding the channel - try http://pastebin.ca/ |
| 01:27.31 | glm2k | peggerr: include it an your default sip context |
| 01:27.37 | hardwire | ronaldl79: your life sucks worse than mine today |
| 01:27.44 | ronaldl79 | lol |
| 01:27.58 | jskcr | ronaldl79: is that a fresh cvs check out of zaptel |
| 01:28.15 | ronaldl79 | No, just 1.2 Beta |
| 01:28.35 | jskcr | ronaldl79: check out the latest cvs of the zaptel and try again |
| 01:28.38 | jskcr | thank you come again |
| 01:28.44 | Dr_Ray | thank you drive through |
| 01:28.46 | hardwire | danke! danke! |
| 01:28.47 | ronaldl79 | All I want is MeetMe to be recognized by * during compile ... and it's not happening. |
| 01:29.11 | wunderkin | well if zaptel doesn't complete then you dont have ztdummy |
| 01:29.11 | timecop | silencethreshold in voicemail, does lwoer numbers detect silence better or the other way around? |
| 01:29.15 | Qwell | ronaldl79: Did you uncomment the ztdummy line, or something? |
| 01:29.17 | MikeJ[Laptop] | ronaldl79, just type make |
| 01:29.21 | Qwell | ronaldl79: you don't need to do that on 2.6 |
| 01:29.22 | timecop | as in if im getting early hangups because of silence do I increase or decrease it? |
| 01:29.23 | MikeJ[Laptop] | no other sutff after it. |
| 01:29.31 | ronaldl79 | Even though I'm using 1.2 Beta, jskcr? |
| 01:29.34 | jskcr | what part of my very descriptive answer to your problem did you miss |
| 01:29.38 | jskcr | YES |
| 01:29.41 | hardwire | wow |
| 01:29.47 | hardwire | I needed a bigger font is all |
| 01:29.48 | ronaldl79 | I've done 'make,' 'make install,' and 'make linux26' ... each results in that error. |
| 01:29.50 | hardwire | I am not going blind |
| 01:29.52 | peggerr | glm2k but i dont have any sip phones |
| 01:29.54 | jskcr | go check out the latest cvs and do it again! |
| 01:30.03 | hardwire | make linux26.. I haven't done that in a while |
| 01:30.20 | Darwin35 | why use ztdummy on 2.6 when you can uuse rtc |
| 01:30.21 | ronaldl79 | I uncommented ztdummy.... |
| 01:30.38 | MikeJ[Laptop] | shouldn't have to do linux26 |
| 01:30.39 | ronaldl79 | jskcr -- which branch is the latest zaptel on??? |
| 01:30.40 | Qwell | ronaldl79: Don't do that on 2.6 |
| 01:30.40 | jskcr | rm -rf zaptel and cvs check out zaptel from HEAD. |
| 01:30.56 | MikeJ[Laptop] | ronaldl79, you don't need to checkout from head |
| 01:31.09 | MikeJ[Laptop] | 1.2 release should build fine |
| 01:31.19 | MikeJ[Laptop] | what did you modfiy before you typed make? |
| 01:31.19 | jskcr | Ive had alot of problems wit the 1.2 that the recent zaptel cvs patches have fixed |
| 01:31.29 | Qwell | MikeJ[Laptop]: <ronaldl79> I uncommented ztdummy.... |
| 01:31.29 | MikeJ[Laptop] | but it built fine |
| 01:31.33 | MikeJ[Laptop] | hmmm |
| 01:31.34 | ronaldl79 | And how do you propose using rtc Darwin? |
| 01:31.38 | ronaldl79 | Dpm |
| 01:31.43 | ronaldl79 | Don't do what, Qwell? |
| 01:31.46 | timecop | today would be nice |
| 01:31.51 | Qwell | uncomment the ztdummy stuff, on 2.6 |
| 01:32.10 | Qwell | and, rtc will automatically be used if kernel version > (>= ?) 2.6.13, I believe |
| 01:32.18 | Qwell | are we at 2.6.14 yet? heh |
| 01:32.19 | MikeJ[Laptop] | Qwell, well kinda |
| 01:32.19 | ronaldl79 | Mike ... and it has ... it compiled just fine about two weeks ago ... with MeetMe....now, I've got ztdummy loaded....and MeetMe doesn't want to compile.... |
| 01:32.34 | MikeJ[Laptop] | the if in the code is wrong, so it's used if it is >=2.6.1 |
| 01:32.47 | Qwell | neat |
| 01:32.59 | MikeJ[Laptop] | is that zaptel or asterisk compile failing? |
| 01:33.14 | jmg | has anyone got twinkle to work with *? |
| 01:33.16 | MikeJ[Laptop] | that's zaptel failing |
| 01:33.23 | Qwell | You DID compile asterisk after installing zaptel before, right? |
| 01:33.26 | jskcr | I just get cheap x100p's for 15 bucks a piece to do the timing :) |
| 01:33.26 | ronaldl79 | So, Qwell, are you telling me that MeetMe will automatically use RTC for timing....and conferencing will work? |
| 01:33.28 | jmg | twinkle or kphone i cant get either |
| 01:33.29 | MikeJ[Laptop] | so rm -rf /usr/src/zaptel |
| 01:33.36 | jmg | registration failed |
| 01:33.38 | Qwell | ronaldl79: pretty much, yes |
| 01:33.42 | MikeJ[Laptop] | re-extract it. |
| 01:33.49 | ronaldl79 | Qwell, at first....no.....then I cleaned everything up, and compiled zaptel first, then asterisk, etc.... |
| 01:33.58 | ronaldl79 | So, comment ztdummy out again, Qwell? |
| 01:34.05 | Qwell | on 2.6, yes |
| 01:34.14 | Qwell | listen to MikeJ[Laptop] |
| 01:34.30 | jmg | any ideas? |
| 01:34.34 | MikeJ[Laptop] | hold one sec. |
| 01:34.41 | MikeJ[Laptop] | re-checking the makefile we release |
| 01:34.42 | MikeJ[Laptop] | d |
| 01:35.29 | ronaldl79 | Mike, okay...I did as you suggested, so cvs checkout again from 1.2 beta?? |
| 01:35.51 | Qwell | ronaldl79: yes |
| 01:36.24 | MikeJ[Laptop] | yes |
| 01:36.32 | MikeJ[Laptop] | and don't modify anything |
| 01:36.46 | MikeJ[Laptop] | if you are using 2.6, ztdummy will compile by default |
| 01:36.52 | MikeJ[Laptop] | just type make |
| 01:37.23 | file | I think a woman in the Phillipine office is trying to get me to hook up with bkw |
| 01:37.26 | ronaldl79 | alright...let's see what happens.... |
| 01:37.29 | Qwell | file: You should |
| 01:37.31 | MikeJ[Laptop] | <PROTECTED> |
| 01:37.31 | MikeJ[Laptop] | <PROTECTED> |
| 01:37.31 | MikeJ[Laptop] | <PROTECTED> |
| 01:37.35 | MikeJ[Laptop] | see :) |
| 01:37.40 | file | "So he is your friend and may be living with ya as well right? :-)" |
| 01:37.48 | MikeJ[Laptop] | wow |
| 01:37.51 | MikeJ[Laptop] | bizzare |
| 01:38.12 | MikeJ[Laptop] | around the world gaydar? :P |
| 01:38.16 | file | apparently |
| 01:38.19 | MikeJ[Laptop] | heh |
| 01:38.31 | jskcr | whats gaydar? |
| 01:38.43 | MikeJ[Laptop] | raydar... gay-dar |
| 01:38.47 | ronaldl79 | Bad news..... |
| 01:38.50 | jskcr | oh lol |
| 01:38.51 | Qwell | anybody watch X-Men? Remember that thing Prof X used, to find people? |
| 01:38.59 | Dr_Ray | you know that vibe you get when you think chicks want to do you? |
| 01:39.00 | ronaldl79 | I just checked out zaptel....still getting the same error with 'make' |
| 01:39.03 | MikeJ[Laptop] | ronaldl79, what's up. |
| 01:39.05 | MikeJ[Laptop] | hmmm |
| 01:39.16 | MikeJ[Laptop] | pastebin from the make command on down |
| 01:39.19 | MikeJ[Laptop] | ~pb |
| 01:39.20 | jbot | pastebin is, like, a place to paste your stuff without flooding the channel - try http://pastebin.ca/ |
| 01:39.43 | *** join/#asterisk Moc (n=mochouin@modemcable173.101-70-69.mc.videotron.ca) |
| 01:39.46 | peggerr | i am having trouble phrasing this question but how do i get the extesnsions.conf to go forom one seciotn to the other http://pastebin.com/378355 |
| 01:39.56 | file | now she's telling me how she swears in her native language |
| 01:40.03 | Qwell | file: How does she? |
| 01:40.19 | jskcr | roamer323: are you on a redhat system by chance |
| 01:40.21 | file | no clue, the translation is failing horribly |
| 01:40.27 | ronaldl79 | Okay, I just pasted it, MikeJ |
| 01:40.43 | Qwell | ronaldl79: link? |
| 01:40.45 | ronaldl79 | http://pastebin.ca/24274 |
| 01:40.47 | MikeJ[Laptop] | now you need to tell me the link :p |
| 01:40.47 | jskcr | ronaldl79: : are you on a redhat system by chance |
| 01:40.48 | MikeJ[Laptop] | heh |
| 01:41.16 | ronaldl79 | No ... Suse 10.0. I have compiled various versions of * on Suse before ....from 9.3... |
| 01:41.37 | ronaldl79 | I compiled 1.2 Beta on Suse 10.0 Beta 4 ... installed RC1 today. |
| 01:42.07 | peggerr | how do i make it so i jump from one Context to another http://pastebin.com/378358 |
| 01:42.15 | file | I've got her paranoid... |
| 01:42.42 | Qwell | file: How's the brainwashing going? |
| 01:42.47 | Qwell | shit, wrong chan |
| 01:42.57 | file | they're not smart enough |
| 01:43.14 | Qwell | as subjects, or as implementors? |
| 01:43.20 | file | both |
| 01:43.24 | Qwell | interesting |
| 01:43.36 | Qwell | maybe you should move that group to PR? |
| 01:43.56 | file | I could try it on the Florida office |
| 01:44.11 | Qwell | peggerr: You seriously need to read. That is honestly the most basic question |
| 01:44.13 | MikeJ[Laptop] | ok... |
| 01:44.13 | file | they call me "sir" and stuff... that's already brainwashed... |
| 01:44.14 | Qwell | ~wikis |
| 01:44.16 | jbot | wikis is, like, http://www.voip-info.org |
| 01:44.28 | Qwell | peggerr: go there, read as much as you can, sleep, read some more |
| 01:44.31 | jskcr | ronaldl79: did you install the kernel source and go into /usr/src/linux and make cloneconfig |
| 01:44.33 | MikeJ[Laptop] | the best I can say is it looks like you do not have the correct headers for your kernel installed |
| 01:44.50 | ronaldl79 | hmmmm |
| 01:44.51 | jskcr | MikeJ[Laptop]: thats exactly what I was thinking |
| 01:45.06 | Qwell | jskcr: Whats cloneconfig do? |
| 01:45.08 | ronaldl79 | jskcr ... no, I haven't installed the kernel source...that's 200 mb ...lol |
| 01:45.09 | jskcr | MikeJ[Laptop]: ive seen the same thing from upgrading the kernel/kernel/source and not rebooting |
| 01:45.21 | *** join/#asterisk Renacor (n=kvirc@ip21.farheap.net) |
| 01:45.28 | MikeJ[Laptop] | ronaldl79, you just need the headers, not the whole source |
| 01:45.43 | MikeJ[Laptop] | but kernel soure package shouldn't be that big |
| 01:45.45 | ronaldl79 | There's already a symlink created by Suse..... |
| 01:46.02 | MikeJ[Laptop] | what does suse use, apt-get? |
| 01:46.05 | hardwire | I wanna make my asterisk server swagger with requests |
| 01:46.06 | Qwell | yast |
| 01:46.13 | hardwire | whats a simple testing system for that |
| 01:46.17 | MikeJ[Laptop] | oh yes, yast |
| 01:46.31 | Darwin35 | night kids |
| 01:46.34 | Inv_arp | hmm, dont get this, once and a while my inbound sip register fails, but a sip reload fixes it all the time |
| 01:46.34 | MikeJ[Laptop] | I think they call it kernel-sorcecode |
| 01:46.35 | jskcr | MikeJ[Laptop]: suse uses rpm / yast |
| 01:46.58 | ronaldl79 | That would contain the headers, Mike? |
| 01:47.03 | MikeJ[Laptop] | yes it does |
| 01:47.20 | MikeJ[Laptop] | and should install them in a place that they can be gotten |
| 01:47.22 | jskcr | its kernel-source for suse ronaldl79 is the package ya need |
| 01:47.27 | MikeJ[Laptop] | sigh |
| 01:47.34 | MikeJ[Laptop] | I hate how everyone calls it diff |
| 01:47.58 | MikeJ[Laptop] | on fedora it is kernel-source for 2.4 and kernel-sourcecode for 2.6 or somthing stupid |
| 01:47.59 | file | if anyone wants to donate an ATA100 or ATA133 hard drive to me, feel free to |
| 01:48.02 | MikeJ[Laptop] | I gotta run home |
| 01:48.06 | jskcr | yea I do too there needs to be some consistency between rpm based system and there is none |
| 01:48.09 | MikeJ[Laptop] | buh bye |
| 01:48.15 | ronaldl79 | Lovely.....rofl....it's downloading..... |
| 01:48.20 | ronaldl79 | All 207 MB..... |
| 01:48.27 | peggerr | Qwell i have done a lot of reading |
| 01:48.30 | ronaldl79 | At dialup speeds, it will take 50 years to finish....just kidding |
| 01:48.31 | jskcr | ronaldl79: also go to /usr/src/linux and make cloneconfig |
| 01:48.59 | kingtux | running build of asterisk and getting this ....src/short_term.c:381: warning: unused variable `i' |
| 01:49.01 | ronaldl79 | there isn't a linux directory just yet, but I presume there will be once this is downloaded.... |
| 01:49.04 | kingtux | should i be alarmed |
| 01:49.06 | kingtux | ?? |
| 01:49.13 | drumkilla | kingtux: no |
| 01:49.19 | ronaldl79 | Refresh my memory, but what does cloneconfig do? Configure the kernel? |
| 01:49.29 | Qwell | oh crap, unused variable? STOP THE PRESSES |
| 01:49.46 | kingtux | lol |
| 01:50.03 | drumkilla | it has to do with optimizations that can be enabled |
| 01:50.12 | hardwire | aww |
| 01:50.13 | hardwire | mike left |
| 01:50.20 | drumkilla | so there are a few warnings like that |
| 01:50.30 | Qwell | hardwire: yeah, I just wasted like 30 seconds trying to tab complete his name |
| 01:50.36 | hardwire | so did I |
| 01:50.38 | Qwell | heh |
| 01:50.41 | hardwire | where is he |
| 01:50.44 | hardwire | where is he |
| 01:51.02 | hardwire | Qwell: you wanna help me fix ChanIsAvail :) |
| 01:51.12 | Qwell | not really |
| 01:51.18 | hardwire | it figures |
| 01:51.20 | hardwire | you make friends |
| 01:51.27 | hardwire | but all people really care about is themselves |
| 01:51.30 | hardwire | and good riddance |
| 01:52.34 | ronaldl79 | Good deal....70% done on this 200+ MB download |
| 01:54.12 | kingtux | whats the deal with this I had this warning before forgot how to get rid of it |
| 01:54.13 | kingtux | WARNING[21656]: chan_oss.c:257 sound_thread: Read error on sound device: Resource temporarily unavailable |
| 01:54.30 | ronaldl79 | Alright, I am making 'zaptel' right now.... |
| 01:54.59 | Qwell | Don't you have to compile the kernel if you grab the source and not the headers? |
| 01:55.11 | jskcr | kingtux: Probably because something else using your sound card |
| 01:55.24 | jskcr | Qwell: not on suse |
| 01:55.45 | ronaldl79 | wooohooo.....a successful make of zaptel.... |
| 01:55.49 | kingtux | I dont't something is using my sound ard |
| 01:56.06 | Qwell | kingtux: /etc/asterisk/modules.conf - noload => chan_oss.so |
| 01:56.07 | jskcr | make cloneconfig will create the proper version.h for suse if it is not there |
| 01:56.14 | ronaldl79 | I still gotta do a make install though..... |
| 01:56.28 | Qwell | ronaldl79: then make clean on asterisk, and reinstall it |
| 01:56.36 | jskcr | err and make dep |
| 01:56.40 | kingtux | what does chan_oss.so do again |
| 01:56.52 | Qwell | kingtux: lets you use asterisk as a softphone, basically...its silly |
| 01:57.08 | jskcr | cd /usr/src/zaptel ; make ; make install ; cd /usr/src/asterisk ; make clean ; make ; make install |
| 01:57.21 | kingtux | rgr that |
| 01:58.12 | Dr_Ray | kingtux - it also lets you use a pager |
| 01:58.21 | Dr_Ray | kingtux - or a radio pager.. |
| 01:58.25 | *** join/#asterisk swm_ (n=admin@digitaldatabits.net) |
| 01:58.55 | spackle | Dr_Ray - radio pager? How so? |
| 01:59.15 | Dr_Ray | pipe the output of the console into a radio |
| 01:59.30 | kingtux | what about this warning |
| 01:59.31 | kingtux | <PROTECTED> |
| 01:59.38 | kingtux | i have a few more too |
| 01:59.49 | swm_ | no ztdummy driver? |
| 01:59.56 | kingtux | WARNING[21684]: chan_iax2.c:7477 load_module: Unable to open IAX timing interface: No such file or directory |
| 02:00.01 | kingtux | forgot to modprobe |
| 02:00.02 | jskcr | kingtux: do you have a orielly safari account |
| 02:00.04 | kingtux | it iguess |
| 02:00.16 | kingtux | no why |
| 02:00.25 | jskcr | kingtux: go get the new asterisk oreilly book |
| 02:00.28 | swm_ | kingfux: You need to load the ztdummy driver |
| 02:00.51 | kingtux | is it good |
| 02:01.03 | jskcr | yes |
| 02:01.10 | jskcr | swm_: for a beginner |
| 02:01.37 | kingtux | ok |
| 02:02.07 | hardwire | me wants to play w/ dundi |
| 02:02.12 | hardwire | I just don't have enough.. I guess servers |
| 02:02.12 | *** join/#asterisk Moc_ (n=Moc@modemcable173.101-70-69.mc.videotron.ca) |
| 02:02.13 | jskcr | www.oreilly.com/catalog/asterisk/ |
| 02:02.18 | hardwire | to really do this stuffins |
| 02:02.20 | swm_ | They also have VoIP Technology wish Asterisk and... Asterisk: The Future of Telephony |
| 02:02.21 | hardwire | Moc_ ahoy! |
| 02:02.26 | Moc_ | hi |
| 02:03.00 | Dr_Ray | My copy came today.. It's a good snapshot of where asterisk is right now, and it's a good loaner book, rather than me having to do it for people I work with. |
| 02:03.34 | swm_ | Asterisk : The Future of Telephony -- Jared Smith, et al; Paperback (Rate it) |
| 02:03.34 | swm_ | VoIP Telephony with Asterisk -- Paul Mahler; Paperback (Rate it) |
| 02:03.34 | swm_ | Borders has these too |
| 02:03.52 | Dr_Ray | is that the yellow book? |
| 02:04.01 | kingtux | cool will pickup tomorrow |
| 02:04.06 | mmlj4 | oh, i have that book |
| 02:04.07 | Dr_Ray | the $50 book, that there is no way to evaluate |
| 02:04.10 | *** join/#asterisk Goshen (n=Goshen@c-67-172-238-57.hsd1.ut.comcast.net) |
| 02:04.11 | swm_ | Dr_rawy: Which one yellow? |
| 02:04.14 | hardwire | I need to make res_musiconhold_mixable |
| 02:04.14 | ronaldl79 | Thanks to everyone for their help in troubleshooting Zaptel ... my brain is fried.... |
| 02:04.15 | mmlj4 | and hate it... the guy CAN'T WRITE |
| 02:04.24 | *** join/#asterisk mog_home (n=mogorman@user-24-236-84-48.knology.net) |
| 02:04.26 | Dr_Ray | the Yellow book is garbage |
| 02:04.44 | swm_ | Yeah Yellow book looks like shit |
| 02:04.49 | kingtux | really yellow book garbage |
| 02:04.50 | file[laptop] | my name is in the O'Reilly book... you should find it |
| 02:05.01 | Dr_Ray | I mean it has the virtue of being first |
| 02:05.04 | swm_ | How would file get his name in a book |
| 02:05.08 | mmlj4 | file[laptop]: which? |
| 02:05.12 | Dr_Ray | irc transscript? |
| 02:05.22 | file[laptop] | look for Joshua or Josh Colp... |
| 02:06.02 | file[laptop] | ironically my copy arrives on my birthday... |
| 02:06.18 | Dr_Ray | my copy got here today.. the second copy will be here next week |
| 02:06.25 | mmlj4 | no, i mean which oreilly book? switching to voip? |
| 02:06.30 | file[laptop] | the Asterisk book |
| 02:06.41 | jmg | anyone reccomend a softphone for kde ? |
| 02:06.45 | jmg | that supports arts? |
| 02:06.46 | Dr_Ray | the future of telephone |
| 02:06.49 | Dr_Ray | y |
| 02:06.51 | kingtux | for now how do i get rid of this warning |
| 02:06.52 | kingtux | res_musiconhold.c:565 moh_register: Unable to open pseudo channel for timing... Sound may be choppy. |
| 02:06.56 | *** join/#asterisk evilrabbi (i=shellcod@ip68-97-70-223.ok.ok.cox.net) |
| 02:07.15 | evilrabbi | what will cause asterisk to give me a 404 error when tring to dial out? |
| 02:07.25 | file[laptop] | evilrabbi: the extension isn't found. |
| 02:07.31 | evilrabbi | ah |
| 02:07.33 | evilrabbi | :) |
| 02:07.34 | evilrabbi | ty |
| 02:08.05 | peggerr | why might script fial to run http://pastebin.com/378377 ??? |
| 02:08.23 | file[laptop] | peggerr: it says right there |
| 02:08.28 | file[laptop] | "No such file or directory" |
| 02:09.02 | *** join/#asterisk apardo (n=apardo@144.Red-83-34-123.dynamicIP.rima-tde.net) |
| 02:09.34 | *** join/#asterisk JunK-Y (n=junky@69.156.171.59) |
| 02:09.54 | Sedorox | hmmmmmmm........ just now trying asterisk.... and it sounds like a banjo playing when I try to play a gsm file... |
| 02:09.56 | *** join/#asterisk alexhopper (n=a27386@CPE000103d29ae2-CM001225dfdfe0.cpe.net.cable.rogers.com) |
| 02:10.00 | Sedorox | any clues? |
| 02:10.03 | ronaldl79 | Is func_uri.so anything of importance? |
| 02:10.18 | JerJer | Sedorox: cat /proc/interrupts |
| 02:10.28 | JerJer | is your zaptel device sharing interrupts? |
| 02:10.33 | Sedorox | this is odd.. voicemail did work correctly :p |
| 02:10.38 | Sedorox | only have ztdummy |
| 02:10.45 | Sedorox | this is pure voip setup... |
| 02:10.52 | JerJer | then your network is latent |
| 02:11.10 | Sedorox | well this is interesting.... |
| 02:11.12 | Sedorox | its gentoo... |
| 02:11.15 | Dr_Ray | my network aint no homo |
| 02:11.19 | Sedorox | if I start with the command.... asterisk -vvvvvvvc.... |
| 02:11.22 | Sedorox | I ge the problem... |
| 02:11.24 | Sedorox | get* |
| 02:11.30 | Sedorox | yet if I /etc/init.d/asterisk start |
| 02:11.33 | Sedorox | it works fine....... |
| 02:11.38 | *** join/#asterisk zotz (n=zotz@24.231.36.100) |
| 02:11.40 | Sedorox | oddddddd |
| 02:11.55 | kingtux | xp100 is used for timing right |
| 02:11.57 | kingtux | card |
| 02:12.22 | kingtux | well can be used for timing |
| 02:12.49 | *** join/#asterisk jeffik (n=Jeff@CPE0011505c92d3-CM014350000760.cpe.net.cable.rogers.com) |
| 02:12.53 | peggerr | file[laptop] but it is there |
| 02:13.18 | Dr_Ray | woo, if you buy the book, you get 45 days to read the safari version of it. |
| 02:13.22 | file[laptop] | Failed to execute '/usr/local/libdata/asterisk/agi-bin/cidspoof.agi': No such file or directory |
| 02:13.25 | file[laptop] | that says otherwise |
| 02:13.43 | peggerr | file[laptop] http://pastebin.com/378381 |
| 02:13.47 | Sedorox | allwell.... |
| 02:13.47 | Sedorox | :p |
| 02:15.03 | file | is it executable? |
| 02:15.47 | peggerr | file -rwxr-xr-x 1 root wheel 2580 Sep 27 16:28 cidspoof.agi |
| 02:15.57 | peggerr | file is the executable enough? |
| 02:16.14 | apardo | i have some problems with hungup zap channels in spain. maybe a telco issue. somebody knows if this problems has resolved in asterisk stable versions ? |
| 02:16.19 | ronaldl79 | Has anyone ever left * running by accident while compiling new code? If so, what happened after? Did any modules fail to load? |
| 02:16.28 | *** part/#asterisk kingtux (n=kingtux@pool-151-196-251-23.balt.east.verizon.net) |
| 02:16.38 | peggerr | file is is the dame as the other two |
| 02:17.05 | cced | who is familiar with tormenta2.vhd? |
| 02:17.53 | wunderkin | just stop asterisk after you install and then start asterisk |
| 02:18.12 | azzie_ | anybody played with sipX ? |
| 02:18.19 | JunK-Y | cidspoof, i like the name! |
| 02:19.00 | ronaldl79 | wunderkin -- I've got modules failing....lol....just my night....I'm recompiling anyway. |
| 02:19.37 | Sedorox | ok.. apparently the problem is that asterisk needs to run as seperate user :p |
| 02:20.11 | peggerr | file the permissons are the same as the other two |
| 02:20.27 | *** join/#asterisk Sedorox (n=Brandon@smartserv/cna/Sedorox) |
| 02:21.39 | Sedorox | anyone in MST timezone? |
| 02:22.32 | peggerr | JunK-Y thkns! |
| 02:22.54 | cced | who use E400P?Thanks a lot |
| 02:23.20 | FuriousGeorge | so if we are never supposed to use ._ how are you supposed to give the bossman the ability to call china and taiwan? do i gotta put in a dialrule for every country code out there? |
| 02:23.21 | *** join/#asterisk hparker (n=hparker@gentoo/developer/hparker) |
| 02:24.12 | peggerr | what is going wrong here why does asterisk not like my file that has the same permissions as the other two http://pastebin.com/378389 ??? |
| 02:24.57 | ronaldl79 | I am, Sedorox |
| 02:25.19 | Sedorox | you got 7:25, right? |
| 02:25.30 | ronaldl79 | No, it's 8:25, Sedorox. |
| 02:25.41 | peggerr | spedrox |
| 02:26.42 | Sedorox | hmmmmm |
| 02:26.55 | Sedorox | but your in daylight sayings, right? |
| 02:27.06 | peggerr | what is going wrong here why does asterisk not like my file that has the same permissions as the other two http://pastebin.com/378389 ?? any ideas? |
| 02:30.24 | Qwell | FuriousGeorge: _X. at the VERY least |
| 02:34.42 | FuriousGeorge | Qwell: whats the functional difference though |
| 02:35.04 | FuriousGeorge | ._ vs .X_ |
| 02:35.29 | Darwin35 | no its 9:35 |
| 02:35.50 | Qwell | _. will match h |
| 02:36.24 | FuriousGeorge | h as in hangup? |
| 02:36.31 | L|NUX | Qwell : hey do you have any idea why eyebeam sends this to my provider ? |
| 02:36.31 | Qwell | yes |
| 02:36.35 | L|NUX | Qwell : Sep 30 12:20:21 WARNING[23940]: chan_sip.c:6890 handle_response: Forbidden - wrong password on authentication for INVITE to '"Farrukh Ahmed" <sip:asterisk@202.5.145.14:8891>;tag=as4d6381fa' |
| 02:36.48 | Qwell | L|NUX: because its the wrong password? |
| 02:36.53 | L|NUX | well but wait |
| 02:37.05 | L|NUX | mbox*CLI> sip show registry |
| 02:37.05 | L|NUX | Host Username Refresh State |
| 02:37.05 | L|NUX | chat.brain.net.pk:8891 2105999 105 Registered |
| 02:38.06 | L|NUX | so |
| 02:38.30 | *** part/#asterisk spackle (n=spackle@209.234.83.19) |
| 02:43.02 | *** join/#asterisk Snake-Eyes (n=blog@203.220.55.70) |
| 02:43.24 | *** join/#asterisk chineez (n=azn@c529da281.cable.wanadoo.nl) |
| 02:43.49 | *** join/#asterisk rking (n=rking@ip68-105-231-56.lu.dl.cox.net) |
| 02:44.07 | rking | what kind of dolt would clonebot-annoy a channel like this? |
| 02:44.20 | *** join/#asterisk Sed[Mac] (n=Brandon@smartserv/cna/Sedorox) |
| 02:44.36 | rking | i mean, #chat or something, sure... that's kind of funny on some low level... but a volunteer help channel? |
| 02:45.03 | *** join/#asterisk TucoDeAnimal (n=TucoDeAn@201.199.76.194) |
| 02:46.51 | *** part/#asterisk chineez (n=azn@c529da281.cable.wanadoo.nl) |
| 02:51.40 | *** join/#asterisk nicolasg (n=nicolas@ip-189.houseware.com.ar) |
| 02:51.47 | konfuzed | does any one here use a GrandStream HandyTone 488 ATA ? |
| 02:52.17 | konfuzed | I wonder how well the FXO termination actually works |
| 02:52.54 | konfuzed | hhhmmm |
| 02:53.05 | konfuzed | well you only live once I suppose |
| 02:53.10 | konfuzed | whats another 20 bucks right |
| 02:53.55 | konfuzed | :^) |
| 02:55.58 | *** join/#asterisk loud (n=ariel@cypher.punk.net) |
| 02:58.47 | *** part/#asterisk nicolasg (n=nicolas@ip-189.houseware.com.ar) |
| 03:02.03 | *** join/#asterisk orbodiuh (n=pabloble@adsl-8-141-46.mia.bellsouth.net) |
| 03:03.24 | *** join/#asterisk RomDump (i=romdump@norge.freeshell.ORG) |
| 03:08.46 | cced | who use E400P?Thanks a lot |
| 03:10.08 | Supaplex | digium does |
| 03:10.47 | cced | o :) |
| 03:10.47 | cced | who is familiar with tormenta2.vhd? |
| 03:10.56 | rayvd | calvin! :( |
| 03:12.39 | *** join/#asterisk wasim (n=wasim@pdpc/supporter/active/wasim) |
| 03:15.05 | FuriousGeorge | i notivce when eyebeam gets to conferencing 3 calls the quality is worse than when * is handling 6 individual calls |
| 03:15.32 | FuriousGeorge | i guess the ability to conderence with a softphone is largely a function of said softphones platform and resources? |
| 03:16.59 | Supaplex | cced: cool, so the vhdl source is available. nice :) |
| 03:17.06 | FuriousGeorge | or not, what do i know |
| 03:17.38 | *** join/#asterisk dos000 (n=dos000@i216-58-58-119.cybersurf.com) |
| 03:18.50 | *** join/#asterisk viLeR (i=1000@ip-47-252.telesat.com.co) |
| 03:18.59 | *** join/#asterisk fordvoice (n=chrisf0r@rrcs-70-61-133-92.central.biz.rr.com) |
| 03:19.26 | fordvoice | anybody here |
| 03:20.09 | Supaplex | no, we're all imaginary |
| 03:20.53 | Wrzf | haha |
| 03:21.17 | Wrzf | who is the goto person for astcc |
| 03:21.21 | dos000 | Supaplex, you know that even a sleeping person does not know he is asleep ;-) |
| 03:22.31 | fordvoice | Who is the goto person for astcc |
| 03:23.08 | *** join/#asterisk santiago (n=santiago@208.195.215.135) |
| 03:23.29 | fordvoice | I cannot seem to get the database to connect if I even set it up right..)-; |
| 03:24.02 | fordvoice | any advise or help would be greatly appreciated |
| 03:32.57 | *** join/#asterisk [hC] (n=hardcore@c-24-127-192-210.hsd1.fl.comcast.net) |
| 03:33.42 | *** join/#asterisk hellagony (n=hellagon@peh13-1-82-235-101-51.fbx.proxad.net) |
| 03:34.18 | ronaldl79 | Okay...I've got Ztdummy installed...I'm dialing a test MeetMe extension..."That is not a valid extensions." |
| 03:35.49 | *** join/#asterisk jeffgus (n=jeffgus@2002:d856:c704:0:0:0:0:1) |
| 03:38.01 | [hC] | Ooh i wonder if the 'first 50' all access pass subscriptions to receive the free IAXy have been filled yet. |
| 03:38.15 | *** join/#asterisk neil_ablang (n=neil@intra.eglobalreach.net) |
| 03:38.42 | neil_ablang | anybody who can help me on e&m with TE411P?? |
| 03:39.19 | neil_ablang | my provider says they dont see wink signal from my asterisk box |
| 03:41.26 | Qwell | neil_ablang: sometimes you need to coerce the remote end with a few drinks |
| 03:45.13 | *** join/#asterisk diclophis (n=diclophi@199.35.96.52) |
| 03:45.21 | diclophis | hello everyone |
| 03:45.39 | diclophis | anyone awake in here? |
| 03:46.12 | neil_ablang | yeah..i believe |
| 03:46.41 | diclophis | so... where are the AGI pros |
| 03:46.42 | neil_ablang | will callprogress indicator solves that |
| 03:46.55 | wasim | neil_ablang: nope |
| 03:47.24 | *** join/#asterisk da_monumental_1 (n=da_monum@rrcs-24-172-102-198.midsouth.biz.rr.com) |
| 03:48.06 | da_monumental_1 | is if possible to get time warner digital phone to work with asterisk? if so, does it use sip? |
| 03:48.34 | wasim | possibly, but the voice you hear will be as skewed as the news on their networks |
| 03:51.16 | *** join/#asterisk bmg505 (n=leon@rndf-146-24-210.telkomadsl.co.za) |
| 03:51.53 | Icemaann | i set the w and W options in my dial statement in extensions.conf, but I when I press *1 it does not start recording |
| 03:56.52 | neil_ablang | how to check if wink signal is received in asterisk? |
| 04:01.08 | Qwell | Icemaann: is it enabled in features.conf? |
| 04:03.05 | Dr_Ray | ok, this Asterisk book has already paid for itself |
| 04:04.26 | drumkilla | Dr_Ray: the o'reilly one? |
| 04:04.40 | *** join/#asterisk Delvar (n=irc@host-83-146-53-34.bulldogdsl.com) |
| 04:04.57 | Qwell | eww |
| 04:04.58 | file[laptop] | I like the O'Reilly one, I can't wait to get my copy |
| 04:05.05 | drumkilla | I know, me too! |
| 04:05.11 | drumkilla | I'm waiting for Astricon, though |
| 04:05.16 | drumkilla | and I hope they'll all sign it for me |
| 04:05.17 | mog_home | ditto |
| 04:05.20 | mog_home | yeah |
| 04:05.25 | file[laptop] | drumkilla: mine is being delivered... on my birthday! |
| 04:05.31 | drumkilla | w00t |
| 04:05.38 | Qwell | who's actually giving out the book? |
| 04:05.38 | file[laptop] | how's that for scary? |
| 04:05.40 | Qwell | authors et al? |
| 04:05.44 | drumkilla | O'reilly is giving them, i think |
| 04:05.47 | Qwell | ahh, neat |
| 04:05.51 | drumkilla | but the authors will be there, though |
| 04:05.58 | Qwell | drumkilla: yeah, of course |
| 04:06.00 | Dr_Ray | yes, the orielly one |
| 04:06.19 | drumkilla | Dr_Ray: awesome. i'm glad to hear that! :) |
| 04:06.21 | Dr_Ray | I'm on page 40, and already learned a few things |
| 04:06.38 | drumkilla | i hope I learn something :) |
| 04:06.41 | file[laptop] | Dr_Ray: very good |
| 04:06.45 | Dr_Ray | zaptel watchdog, may solve my tdm problem |
| 04:06.50 | peggerr | can somewone tell me what is wrong with my extensions.conf http://pastebin.com/378424 |
| 04:07.03 | Dr_Ray | I also found your name file.. :) |
| 04:07.14 | file[laptop] | Dr_Ray: oh no |
| 04:08.06 | Dr_Ray | I also want to play with passing data through the TDM ports |
| 04:10.01 | drumkilla | ooh, ooh, am I in there? |
| 04:15.10 | *** join/#asterisk Newbie___ (n=me@211.24.146.11) |
| 04:16.15 | Newbie___ | hi all, i use s,5,Authenticate(/etc/asterisk/password.txt|a) to Authenticate my user. once match, how do i send out the callerID stored in in database ? ie 1147=14165551212 |
| 04:17.09 | drumkilla | AGI |
| 04:17.29 | file[laptop] | or plain dialplan logic |
| 04:17.37 | Newbie___ | could i use DBget or DBput ? |
| 04:17.40 | drumkilla | if you use the astdb |
| 04:17.52 | drumkilla | Newbie___: yes, if the callerid values are saved in astdb |
| 04:18.35 | Newbie___ | drumkilla: astdb is asterisk database? |
| 04:20.05 | file[laptop] | I see alive people... |
| 04:22.17 | drumkilla | Newbie___: yep |
| 04:22.41 | wunderkin | i see dead people |
| 04:23.28 | wunderkin | i see you, file! |
| 04:23.51 | file[laptop] | eep |
| 04:24.39 | wunderkin | my portmaster is semi-fux0red but ah well |
| 04:25.44 | wunderkin | maybe its me |
| 04:26.36 | peggerr | can somewone please tellme what is wrong with my extensions.conf http://pastebin.com/378440 |
| 04:26.41 | *** join/#asterisk thetalon (n=Administ@pcp05736660pcs.norstn01.pa.comcast.net) |
| 04:26.44 | wunderkin | i can ping inside the lan and traceroute by ip outside the lan but i cant ping outside the lan.. also dns wont work.. erg..? |
| 04:27.26 | peggerr | please |
| 04:27.45 | wunderkin | peggerr: can you give me a hint what i'm looking for.. whats the error? |
| 04:28.10 | file[laptop] | hint? no hint for you! |
| 04:28.12 | wunderkin | the dial line in the foward context is wrong |
| 04:28.15 | peggerr | wunderkin the extensions dont work |
| 04:28.35 | peggerr | wunderkin if i say dial say 600 nothing happens |
| 04:28.40 | wunderkin | voicebridge is wrong too, theres no pri 1 |
| 04:28.43 | peggerr | it just hangs up after 15 seconds |
| 04:29.18 | wunderkin | well, you need to be dialing from the echo-test context or it should be included in the one its using |
| 04:29.45 | wunderkin | the 900 in default is not right either |
| 04:30.09 | peggerr | well how do i get it to jump from one context to the other |
| 04:30.59 | wunderkin | what are you trying to do here |
| 04:31.14 | wunderkin | i assume just learning how to get it all setup |
| 04:31.39 | *** join/#asterisk argos73 (n=mike@65-85-207-101.client.dsl.net) |
| 04:31.51 | peggerr | wunderkin i am grying to get the did to pick up and then let me type in a extension and if i do not pick up in say 15 seconds then it forwards me to a pstn number, yes i am still learning |
| 04:34.05 | wunderkin | i learned using the asterisk handbook on www.asterisk.org, support.. |
| 04:34.05 | peggerr | what do i need to change around |
| 04:34.11 | wunderkin | everything |
| 04:34.48 | peggerr | i vread through asteriskdocs.org |
| 04:35.37 | peggerr | so no hints |
| 04:38.04 | wunderkin | try reading the handbook, you need to concentrate on the section about the dialplan and contexts |
| 04:38.28 | drumkilla | ~docs |
| 04:38.30 | jbot | extra, extra, read all about it, docs is Documentation can be found at http://www.digium.com/index.php?menu=documentation or http://www.digium.com/handbook-draft.pdf or http://www.voip-info.org/wiki-Asterisk or http://www.asteriskdocs.org or http://www.oreilly.com/catalog/asterisk |
| 04:38.35 | wunderkin | as a start |
| 04:40.27 | *** part/#asterisk rene- (n=rene-@201.154.240.220) |
| 04:40.30 | wunderkin | you should be able to find examples off of the wiki too, there are several example sites listed |
| 04:40.40 | FuriousGeorge | * isnt a reserved extension is it? can i use it to start call parking then use 1-9 to park the calls (its a small install) |
| 04:41.04 | *** join/#asterisk R-Guy (n=ron-mirc@24.83.96.156) |
| 04:41.24 | *** join/#asterisk Jenna (n=cherryRe@209.8.233.242) |
| 04:42.03 | *** join/#asterisk Inv_Arp (i=junya@adsl-156-145-65.mia.bellsouth.net) |
| 04:42.18 | drumkilla | however, there are some * codes reserved for certain kinds of channels |
| 04:42.26 | drumkilla | zap channels for sure |
| 04:42.28 | Inv_Arp | which card do i get if i need 2 fxo and 2 fxs devices |
| 04:42.33 | hypa7ia | drumkilla: ! |
| 04:42.41 | drumkilla | Inv_Arp: the tdm400p |
| 04:42.43 | drumkilla | ~tdm400p |
| 04:42.49 | drumkilla | eh, it was worth a try |
| 04:42.58 | FuriousGeorge | drumkilla: ut those are all *[6,7]X, if you know what i mean |
| 04:43.03 | R-Guy | Anyone here run Asterisk on OpenWRT / WRT54GS? I am having a segv problem with I use SIP - wondering if anyone else has seen this. |
| 04:43.04 | FuriousGeorge | ut=but |
| 04:43.09 | drumkilla | FuriousGeorge: yup |
| 04:43.11 | drumkilla | just sayin' |
| 04:43.19 | drumkilla | hypa7ia: !!!!!!!!!!!!! |
| 04:43.46 | hypa7ia | oh man you totally win this time |
| 04:43.48 | drumkilla | ~tdm400p |
| 04:43.49 | jbot | from memory, tdm400p is http://www.digium.com/index.php?menu=product_detail&category=hardware&product=TDM400P |
| 04:43.52 | drumkilla | yay |
| 04:43.54 | FuriousGeorge | drumkilla: so just * would work, especially since those zap channels we have in mind use # to x-fer, |
| 04:43.56 | hypa7ia | next time!!!! |
| 04:44.10 | drumkilla | FuriousGeorge: yup, it should |
| 04:44.16 | drumkilla | hypa7ia: nev4r!!!!!!!!!! |
| 04:45.02 | drumkilla | i 0wn j00 ! |
| 04:45.51 | Inv_Arp | wheres the best place i can get the tdm400p? |
| 04:46.02 | drumkilla | Inv_Arp: depends where you are :) |
| 04:46.05 | *** part/#asterisk thetalon (n=Administ@pcp05736660pcs.norstn01.pa.comcast.net) |
| 04:46.16 | *** join/#asterisk lilo (i=levin@freenode/staff/pdpc.levin) |
| 04:46.26 | Inv_Arp | US florida acually |
| 04:47.09 | Qwell | FuriousGeorge: Don't use commas in ranges |
| 04:47.21 | Jenna | hi! a n00b question. Can Asterisk be used as a non Voip gateway. I mean sortofa PABX thingy. ? |
| 04:47.26 | FuriousGeorge | Qwell: why not? |
| 04:47.36 | drumkilla | Inv_Arp: you can order it from the asterisk store ... http://store.yahoo.com/asteriskpbx/index.html |
| 04:47.38 | FuriousGeorge | exten => [4,9]11 |
| 04:47.48 | FuriousGeorge | dial(zap... |
| 04:48.54 | Qwell | because you don't want people to be able to dial ,11 |
| 04:50.06 | Inv_Arp | so for 2 pots lines, i need 2 fxs and 2 fxo for in/out calling |
| 04:50.30 | Jenna | ahem ! |
| 04:50.43 | Qwell | Inv_Arp: or 2 fxo, and 90 IP phones |
| 04:51.42 | Inv_Arp | Qwell: heh.. this guy has 2 pots lines only |
| 04:52.10 | Qwell | that fine |
| 04:54.31 | Qwell | thats* |
| 04:54.51 | wunderkin | the fxs ports would be for analog phones |
| 04:54.58 | Inv_Arp | hmm but wait, if there are only 2 (rj11) pots lines this card has 4 inputs |
| 04:55.11 | Qwell | Inv_Arp: you could literally use 90 IP phones, and only 2 "pots lines". There would be nothing stopping the IP phones from talking to each other |
| 04:55.18 | *** part/#asterisk Jenna (n=cherryRe@209.8.233.242) |
| 04:55.36 | pauldy | anyone happen to know the ren for the grandstream ht386 |
| 04:57.08 | wunderkin | jenna was nice and polite |
| 04:58.41 | Qwell | Inv_Arp: point is, you don't "need" the same number of fxo and fxs |
| 04:58.57 | Qwell | If you have 3 employees and 2 lines, it doesn't make too much sense only having two phones |
| 04:59.45 | *** part/#asterisk neil_ablang (n=neil@intra.eglobalreach.net) |
| 05:02.12 | Qwell | hmm, I need an editor |
| 05:02.43 | wasim | Qwell: a friend just quit a national daily and is looking for a job |
| 05:02.53 | Qwell | wasim: I mean a personal editor |
| 05:03.07 | [hC] | Woo, registered for astricon |
| 05:03.16 | [hC] | Wonder how many people have registered so far |
| 05:03.25 | Inv_Arp | Qwell: its 2 pots lines, and 5 internal voip phones... dont i need 2 fxs/2 fxo devices so the 5 voip phones can send/receie calls? |
| 05:03.25 | drumkilla | [hC]: I have, I have! |
| 05:03.27 | Qwell | [hC]: 3 |
| 05:03.37 | wasim | kram, drumkilla and now [hC] |
| 05:03.40 | Qwell | Inv_Arp: at a minimum, you need 2 fxo |
| 05:03.43 | [hC] | haha |
| 05:03.48 | Qwell | wasim: kram doesn't really have to register |
| 05:03.52 | Dr_Ray | no way kram paid |
| 05:03.55 | [hC] | Funny, I just bought the oreilly book today, turns out they're giving out free copies |
| 05:04.05 | wasim | Qwell: it helps fudge the registeration figures |
| 05:04.06 | Qwell | [hC]: free beer too ;] |
| 05:04.09 | [hC] | now i need to sort out flights and hotel |
| 05:04.11 | Inv_Arp | Qwell: and to dial out i need 2 fxs |
| 05:04.14 | drumkilla | ooh, and beer! |
| 05:04.16 | Qwell | Inv_Arp: why? |
| 05:04.19 | Qwell | ~fxofxs |
| 05:04.20 | jbot | i guess fxofxs is An FXO port expects to receive dialtone and receive ring voltage. An FXS port expects to provide dialtone and provide ring voltage. |
| 05:04.21 | [hC] | beeeeeeer gooooood. |
| 05:04.21 | drumkilla | and I get to miss class! |
| 05:04.30 | [hC] | I get to miss work! :) |
| 05:04.40 | Qwell | Inv_Arp: you plug "lines" into fxo, you plug "phones" into fxs |
| 05:04.50 | Qwell | If you aren't going to have any analog phones, you don't need fxs |
| 05:04.57 | Inv_Arp | Qwell: oh yea damn it |
| 05:04.58 | wasim | I get to go the US embassy and get denied a visa |
| 05:05.04 | Qwell | its not "incoming calls" and "outgoing calls" |
| 05:05.19 | Inv_Arp | been so used to voip havent worked with pots in a while |
| 05:05.20 | pauldy | damb terrorists trying to get visas |
| 05:05.26 | *** join/#asterisk meshuga (i=meshuga@c-24-20-154-158.hsd1.wa.comcast.net) |
| 05:05.32 | wasim | especially us bearded ones .. |
| 05:05.33 | Dr_Ray | asteristas |
| 05:05.47 | pauldy | get an mastercard you nut case |
| 05:05.52 | pauldy | ;-) |
| 05:05.54 | Qwell | less strict |
| 05:06.03 | Qwell | you could also get a diners club card or amex |
| 05:06.20 | Dr_Ray | if you can't get a visa, no chance you are getting an amex |
| 05:06.35 | Qwell | please, I got an amex as a prize from a gumball machine |
| 05:06.51 | Qwell | and I'm STILL trying to find somewhere that accepts it |
| 05:07.38 | Dr_Ray | seriously? |
| 05:07.40 | Nugget | they're all easy to get if you're a student. but otherwise, yeah, amex is harder to get than a mastercard or visa. |
| 05:07.46 | pauldy | Qwell, only plac eI go that gives me amex issues is freaking Fry's |
| 05:07.47 | Qwell | Dr_Ray: no |
| 05:07.50 | Dr_Ray | ok |
| 05:08.34 | wasim | someday there'll be an asterasia |
| 05:08.39 | meshuga | so anyone have sucess plugging in a fax machine over a mediatrix connection? |
| 05:08.44 | Qwell | Nugget: its easier for students to get credit cards? |
| 05:08.48 | meshuga | er into a mediatrix that connects to asterisk, i mean |
| 05:08.51 | Nugget | oh yeah, totally. |
| 05:08.53 | pauldy | some day asia will be like the sahara |
| 05:08.54 | Dr_Ray | Qwell, yes, they prey on them |
| 05:09.00 | Qwell | isn't that kinda...illegal? heh |
| 05:09.08 | wasim | Qwell: yes, you get inundated by offers in college |
| 05:09.10 | Qwell | Predatory lending and all that |
| 05:09.14 | Dr_Ray | it's also easier to get credit after BK |
| 05:10.02 | Dr_Ray | most college students are still under the MDNB |
| 05:10.10 | Qwell | mdnb? |
| 05:10.17 | Dr_Ray | mommy-daddy-national-bank |
| 05:10.21 | Nugget | heh |
| 05:10.22 | Qwell | ahh |
| 05:11.02 | *** join/#asterisk Cresl1n (n=matt@user-24-236-124-147.knology.net) |
| 05:15.13 | Icemaann | Qwell: i couldnt find what I needed to at to features.conf to enable it (recording). |
| 05:15.37 | Newbie___ | hi all, i use s,2,Authenticate(/etc/asterisk/password.txt|a) to Authenticate my user. once match, how do i send out the callerID stored in in database ? ie 1147=14165551212. is there a quick and dirty way without AGI |
| 05:17.22 | Qwell | Can't you put callerid into the password file? |
| 05:17.47 | *** join/#asterisk iswm (i=iswm@unaffiliated/iswm) |
| 05:17.56 | Qwell | I must be thinking disa |
| 05:19.24 | Newbie___ | Qwell: passwords are only 4 digits |
| 05:19.30 | *** join/#asterisk scardinal (n=supreme@port816.ds1-suoe.adsl.cybercity.dk) |
| 05:20.27 | Dr_Ray | I actually love getting forex (fake rolex) spam |
| 05:20.33 | Qwell | Newbie___: You could use dbget/dbput, or whatever |
| 05:21.56 | Newbie___ | i tried that, just could not figure out dbget <family> <key> , no example in voip-info.org |
| 05:22.05 | Icemaann | automon found it |
| 05:22.37 | Qwell | Newbie___: I've never used it, but it looks like you do like |
| 05:22.53 | Qwell | dbget(CALLERIDNUM=callerid/1234) |
| 05:23.41 | Newbie___ | Qwell: thanks, i will try |
| 05:24.15 | Icemaann | qwell, are you familiar with AMP/asterisk@home ? I usually do asterisk configs by hand, but im trying A@H and its driving me nuts lol |
| 05:24.46 | Qwell | Icemaann: yes, it does that. don't use it |
| 05:25.06 | Icemaann | it uses all the macro's for dialing out, and I cant find a good way to pass options to dial() without changing the macro. i would have thought there would be a proper AMP way lol. |
| 05:25.15 | Icemaann | Qwell: yea, thats what I have gathered |
| 05:28.48 | *** part/#asterisk AlexCTI (n=alex@weston-69.65.86.197.myacc.net) |
| 05:31.22 | *** join/#asterisk transgress_ (n=transgre@71.14.20.23) |
| 05:33.52 | Newbie___ | Qwell: it worked |
| 05:34.34 | Newbie___ | except i cant confirm if asterisk is sending out the correct ANI |
| 05:34.44 | *** join/#asterisk brookshire (n=matt@gateway.digium.com) |
| 05:38.26 | pauldy | Icemaann, there are custom conf files for doing manual additions for asterisk at home |
| 05:38.58 | pauldy | use the extensions_custom.conf file to make changes and it should give you the same flexibility |
| 05:39.46 | Icemaann | pauldy: yea i saw those, I was just curious if A@H had a standard way to add dial options since that seems to be a pretty common feature. but I can do it in the _custom files all the same |
| 05:41.19 | pauldy | no many dial options can be modified outside the standard coockie cutter uses that are already done for you like moh ring groups and a few other things |
| 05:41.24 | pauldy | not many |
| 05:41.48 | pauldy | but they do give you the custom files in order to do some of the more essoteric configs |
| 05:42.24 | Icemaann | yea i like the contexts they have etc. just need to get familiar with it |
| 05:42.40 | pauldy | took me a while to get used to it too |
| 05:44.54 | Icemaann | now i just have to get this automon feature working. not having much luck |
| 05:45.24 | Qwell | Icemaann: You're running cvs head, uncommented it in features.conf, and are pressing it fast enough, while in a call? |
| 05:46.08 | Icemaann | Qwell: im going off of voip-info.org, which says: asterisk > 1.0.x, im running 1.0.9 |
| 05:46.15 | Qwell | ahh, okay |
| 05:46.18 | Qwell | the other three are true? |
| 05:46.26 | Icemaann | yes |
| 05:46.54 | pauldy | haven't use autmom |
| 05:47.13 | *** join/#asterisk pressure_man (n=pressure@ip-202-37-228-1.internet.co.nz) |
| 05:47.26 | Icemaann | im checking google |
| 05:47.30 | pressure_man | can sip users belong to multiple contexts, like iax? |
| 05:47.47 | Qwell | no, automon is head |
| 05:47.49 | pauldy | deifne a context |
| 05:47.56 | pauldy | and include other contexts in that custom context |
| 05:48.00 | pauldy | and I don't see why they cound't |
| 05:48.01 | pressure_man | that's the only way? |
| 05:48.21 | pressure_man | i mean, in iax.conf, you can specify context= multiple times for each iax user |
| 05:48.35 | Icemaann | Qwell: ahh. yea. i suppose 1.0.9 doesnt quite satisfy the version requirement now that I think of it. it is a bit late lol |
| 05:48.37 | pauldy | pressure_man, I don't know if that will work for sip.conf |
| 05:48.43 | pauldy | but you could always give it a try |
| 05:49.25 | pressure_man | wilco |
| 05:50.38 | Qwell | pressure_man: are you sure thats the case with iax? |
| 05:51.40 | *** join/#asterisk cced (n=dev2003@222.33.36.205) |
| 05:52.02 | pressure_man | iax.conf shows it |
| 05:52.09 | cced | who is familiar with tormenta2.vhd? |
| 05:52.48 | Qwell | pressure_man: where? |
| 05:53.09 | Qwell | oh, I see |
| 05:53.20 | Qwell | yeah, kinda silly |
| 05:53.27 | pauldy | cced, I know vhdl |
| 05:53.35 | pauldy | never used that particular file though |
| 05:54.31 | Qwell | cced: What do you need to know about it? |
| 05:55.02 | jmg | hey guys |
| 05:55.07 | jmg | anyone using chan_capi?: |
| 05:55.08 | pressure_man | in iax.conf: Multiple permitted |
| 05:55.08 | pressure_man | ; contexts may be specified, in which case the first will be the default. |
| 05:55.28 | jmg | we arent getting the congratulations message |
| 05:55.34 | jmg | when we call in |
| 05:55.35 | pressure_man | and it appears that sip users may only belong to one context. if you specify it twice, the latter takes effect |
| 05:56.16 | Qwell | pressure_man: why not just give them a context that includes other contexts? |
| 05:56.28 | pressure_man | yeah, that's the way it has to be done. |
| 05:56.38 | pressure_man | i just wondered if there was a more flexible way to do it |
| 05:56.39 | *** join/#asterisk Pete_Largo (n=PeteLarg@225-196.35-65.tampabay.res.rr.com) |
| 05:57.06 | pressure_man | for example, if you have a separate context each for local, national, international, tollfree etc, and want to assign various combinations of those |
| 05:57.33 | Qwell | [localinternational] include => local, include => international |
| 05:57.46 | Qwell | [tollfreenational] include => tollfree, include => national |
| 05:57.54 | Qwell | not sure I see a problem, really |
| 05:58.03 | pressure_man | sure sure, but lets say for argument's sake, that a user needed local, and international but not tollfree or national |
| 05:58.17 | pressure_man | the more individualised contexts you have, the greate the number of combinations you need to cater for |
| 05:58.41 | pauldy | cced, what are you trying to do with that fiel you have been asking about it for almost a week now |
| 05:58.42 | pressure_man | normally it would be arranged in order from free to most expensive call |
| 05:58.44 | Qwell | <sarcasm>I'd much rather have to put 8 contexts for each user in a config file.</sarcasm> |
| 05:59.13 | pauldy | I just looked it over and all it seems to do is act as soem glue logic between a bus and device |
| 05:59.25 | pauldy | whats not working with it |
| 05:59.30 | pressure_man | with 8 contexts you have around 40,000 permutations |
| 05:59.55 | Qwell | You have a similar problem, by giving each user 8 contexts |
| 06:00.05 | Qwell | or 3 contexts, or 4, of 12, or 90, or 1, or none |
| 06:00.36 | pressure_man | huh? |
| 06:00.40 | Qwell | "okay, 800 users are able to make these calls, these calls, and those calls." |
| 06:00.53 | Qwell | "now those 800 users also need to be able to make calls to Thailand." |
| 06:01.01 | pressure_man | so u use templates |
| 06:01.03 | Qwell | "go make that change to 800 entries in iax.conf" |
| 06:01.06 | pauldy | pressure_man, if youw ant to make it work ther eis an easy way to do it |
| 06:01.19 | Qwell | makes sense to me |
| 06:01.20 | pauldy | if you want to hate the way it works you will find it easier to just hate the way it works |
| 06:01.24 | Qwell | </sarcasm> |
| 06:01.45 | pressure_man | i don't hate it... i'm just investigating all options before making a misinformed decision |
| 06:02.03 | pauldy | best practice is to define a few specific roles |
| 06:02.18 | pauldy | like Qwell is round about recommnding |
| 06:02.25 | pressure_man | as i said, if it's arrange from least cost to greatest cost, that's fine |
| 06:02.29 | pauldy | each role then becomes its own context |
| 06:02.39 | pauldy | you arange it however you want |
| 06:02.49 | pressure_man | i mean, normally you would assume that a use who is allowed to make international calls would also be allowed to call local and tollfree numbers |
| 06:02.59 | pressure_man | it'd be pretty stupid not to let them do that... |
| 06:04.01 | Pete_Largo | anyone know where I can obtain the software that was supposed to come with my Mediatrix 2102 ? |
| 06:04.18 | Pete_Largo | I have a wonderful 2 port ATA that I can't configure ;) |
| 06:08.55 | pauldy | sorry pete |
| 06:12.28 | *** join/#asterisk _santiago_ (n=santiago@208.195.215.135) |
| 06:12.31 | jmg | hmm |
| 06:12.38 | *** part/#asterisk pressure_man (n=pressure@ip-202-37-228-1.internet.co.nz) |
| 06:12.48 | *** join/#asterisk Pete_Largo (n=PeteLarg@225-196.35-65.tampabay.res.rr.com) |
| 06:18.34 | jmg | how can i find out my msn numbers? |
| 06:20.46 | Supaplex | what msn numbers? |
| 06:21.08 | Pete_Largo | what the hell are msn numbers? |
| 06:22.02 | kaldemar | jmg: ask your telco. |
| 06:22.42 | kaldemar | jmg: or dial out using different callerid's. you'll find out pretty fast. |
| 06:23.34 | Supaplex | my guess is a numonic for lame. ;) |
| 06:23.59 | Pete_Largo | lame as opposed to 'leet'? |
| 06:24.08 | Pete_Largo | or lame as in liblame? |
| 06:24.18 | Pete_Largo | I really should get some sleep... |
| 06:24.33 | Supaplex | ditto |
| 06:25.10 | niZon | Pete_Largo: http://www.eicon.com/support/helpweb/DIVA/MSN.HTM |
| 06:25.19 | Pete_Largo | otherwise I'll wake up tomorrow afternoon with a bad case of qwerty-itis. |
| 06:25.59 | argos73 | playing wolfenstein3d, IIRC |
| 06:28.08 | Pete_Largo | ahh, msn is basically what we telephone guys call DID (Direct Inward Dial) |
| 06:28.31 | Pete_Largo | at least, in the US that is |
| 06:30.36 | Pete_Largo | gee, I almost didn't notice that... |
| 06:31.20 | Pete_Largo | a'odgh |
| 06:31.38 | Pete_Largo | whoops, hand didn't make it back to the proper place on the keyboard ;) |
| 06:35.55 | *** join/#asterisk lenne_dk (n=mirc@83.72.129.7.ip.tele2adsl.dk) |
| 06:44.31 | limbique | morging! |
| 06:44.34 | lenne_dk | When doing a sip show peers in the CLI I get this: |
| 06:44.42 | lenne_dk | Name/username Host Dyn Nat ACL Mask Port Status |
| 06:44.42 | lenne_dk | goip/36946139 212.112.140.171 N 255.255.255.255 5060 Unmonitored |
| 06:44.53 | limbique | anyone knows what adsi means? |
| 06:45.00 | limbique | for zap? |
| 06:45.03 | lenne_dk | Yes |
| 06:45.07 | digime | i noticed my TOS bit is getting stripped, anyone have idea why? my router QoS is turned on |
| 06:45.07 | lenne_dk | :-) |
| 06:45.19 | limbique | something like, anolog/digital station interface? |
| 06:45.24 | limbique | my guess? |
| 06:45.29 | digime | it's only happening on outgoing. i am using a sipura phone |
| 06:45.40 | lenne_dk | It's for programming display phones |
| 06:46.10 | limbique | but it is a station interface (no CO line) |
| 06:46.28 | lenne_dk | How can asterisk monitor a peer? |
| 06:48.50 | mog_home | <PROTECTED> |
| 06:53.58 | *** join/#asterisk lehel (n=asd@82.79.20.17) |
| 06:54.00 | lehel | hello |
| 06:58.12 | *** join/#asterisk Gunnar (n=gunnar@bkkb-gw.bitcon.no) |
| 06:58.55 | argos73 | limbique: http://www.voip-info.org/tiki-index.php?page=ADSI |
| 06:59.27 | lenne_dk | "Use the source, Luke". If I add "qualify=1000" to the entries in sip.conf, I get this: |
| 06:59.37 | lenne_dk | Name/username Host Dyn Nat ACL Mask Port Status |
| 06:59.37 | lenne_dk | goip/36946139 212.112.140.171 N 255.255.255.255 5060 OK (31 ms) |
| 07:00.05 | lenne_dk | This I can use in my Big Brother monitoring |
| 07:01.21 | argos73 | grrr... DLink SIP phone worked perfectly with * setup at home, but refuses to behave itself with * setup at work... :( |
| 07:01.52 | *** join/#asterisk bmg505 (n=leon@rndf-146-62-229.telkomadsl.co.za) |
| 07:01.52 | argos73 | only works around 0.01% of the time... |
| 07:02.54 | argos73 | night, all |
| 07:05.51 | *** join/#asterisk mmmToop (n=chatzill@196.31.11.194) |
| 07:07.26 | *** join/#asterisk \PsyKo\ (n=xxxxxxxx@golia.caltanet.it) |
| 07:16.35 | cjk | hello, anyone an idea when beta2 will appear? |
| 07:16.53 | limbique | argos73, tnx! |
| 07:17.40 | cced | who is familiar with tormenta2.vhd? |
| 07:22.36 | Cresl1n | nobody |
| 07:22.38 | Cresl1n | :-) |
| 07:22.53 | ronaldl79 | Anyone successfully using Festival TTS? |
| 07:22.57 | Cresl1n | who knows what ITU spec has isup message format in it? |
| 07:22.58 | Cresl1n | :-D |
| 07:24.27 | *** join/#asterisk FABRIZIOxxx (n=FABRIZIO@81-208-26-86.ip.fastwebnet.it) |
| 07:24.55 | FABRIZIOxxx | hello all.. how do i compile app_intercept for asterisk..? I cannot find any info.. |
| 07:29.59 | *** join/#asterisk mitcheloc (n=mitchelo@69-169-28-46.anhmca.adelphia.net) |
| 07:31.30 | *** part/#asterisk mitcheloc (n=mitchelo@69-169-28-46.anhmca.adelphia.net) |
| 07:32.21 | niZon | ronaldl79: I have it working |
| 07:32.46 | ronaldl79 | Which version are you using, niZon? 1.4.3 or 1.95? |
| 07:34.19 | niZon | umm |
| 07:34.33 | niZon | 1.4.3 |
| 07:35.05 | ronaldl79 | Did you apply the * patch to it? |
| 07:35.09 | *** join/#asterisk brookshire (n=matt@esbrooks3.traveller.com) |
| 07:35.31 | niZon | no |
| 07:36.05 | ronaldl79 | Hmmm...well, aren't you lucky. |
| 07:36.12 | niZon | yeah.. |
| 07:36.20 | niZon | i used the package xorcom has |
| 07:36.22 | ronaldl79 | Dr_Ray: Which versions of * does it cover? And what are you learning? |
| 07:36.31 | niZon | but i still had to do a config tweak |
| 07:36.37 | Dr_Ray | it mentions somethings about 1.2 |
| 07:36.53 | Dr_Ray | it covers the current version of asterisk |
| 07:37.07 | Dr_Ray | I've learned quite a few things I did not know |
| 07:39.22 | ronaldl79 | How much is the book? |
| 07:39.28 | ronaldl79 | And what is your current skill level with *? |
| 07:39.40 | Dr_Ray | amazon.com has it for $29 or so US |
| 07:39.57 | Dr_Ray | I have asterisk deployed with 177 zap extensions |
| 07:40.06 | Dr_Ray | and several cisco phones |
| 07:40.09 | ronaldl79 | And this book was just released? |
| 07:40.15 | Dr_Ray | ~docs |
| 07:40.17 | jbot | it has been said that docs is Documentation can be found at http://www.digium.com/index.php?menu=documentation or http://www.digium.com/handbook-draft.pdf or http://www.voip-info.org/wiki-Asterisk or http://www.asteriskdocs.org or http://www.oreilly.com/catalog/asterisk |
| 07:40.26 | Dr_Ray | the last url |
| 07:41.16 | brookshire | yeah.. |
| 07:41.28 | brookshire | it was just released a few weeks ago |
| 07:41.28 | brookshire | or a week |
| 07:41.34 | Dr_Ray | there are lots of things that I did not know, that I stumbled around.. this is a good refresher book on the current state of things |
| 07:45.08 | *** join/#asterisk tmirage (n=mirage@cust.12.229.adsl.cistron.nl) |
| 07:46.09 | Cresl1n | brookshire!!! |
| 07:46.14 | brookshire | matt! |
| 07:46.19 | brookshire | omg what are you doing up? |
| 07:46.22 | Cresl1n | hey, what are you doing up this late? |
| 07:46.23 | Cresl1n | :-) |
| 07:46.28 | Cresl1n | coding |
| 07:46.28 | brookshire | fixing rt |
| 07:46.30 | brookshire | what else |
| 07:46.31 | brookshire | :) |
| 07:46.33 | Cresl1n | oh |
| 07:46.36 | Cresl1n | hehe |
| 07:46.44 | Cresl1n | so you're not going to auburn this weekend? |
| 07:46.54 | *** join/#asterisk shanky (n=shanky@85.137.127.142) |
| 07:46.58 | brookshire | why do you keep asking everyone but me about that ;) |
| 07:47.00 | shanky | hi, good morning |
| 07:47.05 | brookshire | and no.. i'm not |
| 07:48.38 | Cresl1n | oh |
| 07:48.39 | Cresl1n | ok |
| 07:48.45 | Cresl1n | I was trying to get ahold of you |
| 07:48.54 | brookshire | why didn't you just call me? |
| 07:49.07 | Cresl1n | I finally have a free weekend, so I figured I'd ask :-) |
| 07:49.18 | Cresl1n | well, I checked to see if mark might be going too |
| 07:49.23 | brookshire | oh.. |
| 07:49.24 | Cresl1n | but I guess he's hanging here |
| 07:49.29 | brookshire | well thanks for the warning |
| 07:49.30 | brookshire | :) |
| 07:49.34 | Cresl1n | no prob :-) |
| 07:49.42 | brookshire | i probably could have if i had known you wanted to go |
| 07:49.57 | Cresl1n | ah, it's ok |
| 07:50.02 | Cresl1n | it's probably too late anyway |
| 07:50.13 | Cresl1n | oh, guess what! |
| 07:50.22 | *** join/#asterisk implicit (n=implicit@ip70-181-114-97.oc.oc.cox.net) |
| 07:50.25 | Cresl1n | my sister just ordered a nano |
| 07:53.53 | Moc_ | Cresl1n, you have read about the scraching problem with the nano ? |
| 07:54.15 | Cresl1n | yeah |
| 07:54.26 | Moc_ | it the only reason why I dont buy one |
| 07:54.30 | implicit | i have heard that it's not a widespread problem |
| 07:54.34 | Cresl1n | me too |
| 07:54.35 | Cresl1n | :-D |
| 07:54.42 | implicit | only affecting a small percentage, and they will replace defective ones |
| 07:54.58 | Cresl1n | well, that's the nasty scratch thing |
| 07:55.11 | Cresl1n | if it's not nasty, it's still a little sensitive to scratching from what i hear |
| 07:55.35 | implicit | well if u rub soft plastic against your keys in your pocket of course it will scratch :) |
| 07:55.48 | *** join/#asterisk tobiasWolf (n=konversa@195.162.255.10) |
| 07:56.09 | Cresl1n | this is true :-) |
| 07:56.32 | implicit | just put it in your pocket by itself, i bet it wont :) |
| 07:56.44 | implicit | i know cause i have one |
| 07:56.47 | Dr_Ray | my ipod is scratched up jsut from usaged for a year |
| 07:56.52 | implicit | and i scratched it a bit with my keys before |
| 07:56.53 | Dr_Ray | -d |
| 07:56.55 | implicit | accidentally |
| 07:57.00 | implicit | not too bad though |
| 07:57.06 | implicit | it scratches just as easily as my big ipod |
| 07:57.08 | implicit | g4 |
| 07:57.09 | brookshire | it is |
| 07:57.11 | brookshire | i have one |
| 07:57.11 | brookshire | lol |
| 07:57.20 | brookshire | scratched on the first day |
| 07:57.22 | Cresl1n | :-) |
| 07:57.30 | brookshire | it's still hot though |
| 07:57.32 | implicit | both of them scratch the same in my opinion |
| 07:57.35 | implicit | nano & big one |
| 07:57.39 | Dr_Ray | I want a nano, to replace my perfectly good big one |
| 07:57.43 | Cresl1n | oh, guess what she got engraved on the back |
| 07:57.50 | brookshire | what? |
| 07:57.52 | Dr_Ray | jobs knows how to drive me crazy $$$ wise |
| 07:57.53 | brookshire | her name? |
| 07:57.54 | implicit | 'pussy is fun'? |
| 07:58.02 | brookshire | asterisk? |
| 07:58.03 | Cresl1n | no, sicko |
| 07:58.03 | brookshire | :D |
| 07:58.19 | implicit | L) |
| 07:58.20 | Dr_Ray | sicko, why would she scratch that on the back? |
| 07:58.23 | Cresl1n | she put "Oh no you didn't" on the back |
| 07:58.31 | brookshire | haha |
| 07:58.40 | implicit | lol |
| 07:58.54 | Dr_Ray | "get your damn dirty ape paws off me!" |
| 07:59.08 | implicit | gnite |
| 08:03.52 | shanky | hey, I'm havin problems with codecs |
| 08:04.16 | Dr_Ray | what's the problem? |
| 08:05.14 | shanky | Capabilities: us - 0x19 (g723|alaw|g726), peer - audio=0xe (gsm|ulaw|alaw)/video=0x0 (nothing), combined - 0x8 (alaw) |
| 08:05.18 | shanky | Non-codec capabilities: us - 0x1 (g723), peer - 0x1 (g723), combined - 0x1 (g723) |
| 08:06.05 | shanky | I have this: |
| 08:06.06 | shanky | allow=alaw |
| 08:06.06 | shanky | allow=g723.1 |
| 08:06.06 | shanky | allow=g726 |
| 08:06.24 | shanky | and of course disallow=all |
| 08:07.02 | niZon | disallow=all should be listed first i believe |
| 08:07.57 | shanky | yes, it listed first |
| 08:08.14 | Dr_Ray | are you trying to connect a softphone to asterisk? |
| 08:09.31 | shanky | no, I'm using two sipura 3000 connected in the same lan to an asterisk |
| 08:09.46 | shanky | and then the asterisk is connecting to my voip provider |
| 08:11.39 | *** join/#asterisk CleanerX (n=nix@nat-ph3-wh.rz.uni-karlsruhe.de) |
| 08:20.28 | *** join/#asterisk pa (n=Paolo@unaffiliated/pa) |
| 08:22.45 | shanky | Dr_Ray: any idea about the codecs? |
| 08:24.33 | Dr_Ray | other than just picking one and trying it.. |
| 08:24.36 | Moc_ | the future look bright |
| 08:24.36 | Dr_Ray | no, sorry |
| 08:24.46 | *** join/#asterisk outsidefactor (n=blah@203-217-71-90.dyn.iinet.net.au) |
| 08:26.52 | *** join/#asterisk djin (n=djin@213-132-172-4.multikabel.nl) |
| 08:27.40 | *** join/#asterisk djin (n=djin@213-132-172-4.multikabel.nl) |
| 08:29.56 | *** join/#asterisk X-Rob (n=rob@dsl-202-173-151-24.qld.westnet.com.au) |
| 08:31.35 | *** join/#asterisk Akelavlk (n=jansun@82.119.239.141) |
| 08:31.42 | Akelavlk | Hello, has anybody idea if is "conference" application better than "MeetMe"? Has anyone extereince with that? |
| 08:38.30 | Akelavlk | djin: Sorry? |
| 08:38.43 | Akelavlk | You never heard about 'conference ' application? |
| 08:38.44 | Dr_Ray | MeetMe is what you should use |
| 08:39.48 | Akelavlk | Why? |
| 08:40.08 | Akelavlk | MeetMe seems to be weak application agains 'conference' |
| 08:40.58 | Akelavlk | Here is link with more information about http://cvs.sourceforge.net/viewcvs.py/iaxclient/app_conference/README?rev=1.2&view=auto |
| 08:42.35 | Dr_Ray | don't know much about that... sorry |
| 08:42.39 | Dr_Ray | looks interesting |
| 08:42.46 | Akelavlk | Yes, I think so.. |
| 08:43.16 | Akelavlk | It looks like pretty good application. MeetMe has many limits.. |
| 08:43.27 | Theuni | is anybody using app_rtxfax? my faxes end up in the wrong paper orientation ... |
| 08:44.56 | Delvar | Theuni: turn the paper over then... :) |
| 08:49.10 | Theuni | ;) |
| 08:49.27 | Theuni | i mean it's scaling the image wrongly :) |
| 08:56.37 | Moc_ | lol |
| 08:57.44 | Theuni | and using imagemagick ends up with a lot of bad data |
| 08:57.52 | Theuni | converting it to pdf works, though. |
| 09:02.57 | *** join/#asterisk darkskiez (n=darkskie@194.247.78.146) |
| 09:03.50 | jhiver | Hello everybody |
| 09:04.33 | Delvar | helo dr nick! |
| 09:05.47 | syle | is it possible to recode movies into 4:3? |
| 09:05.58 | syle | take a .vob file to 4:3 |
| 09:06.13 | *** join/#asterisk RoyK (n=roy@80.239.107.80) |
| 09:08.29 | Delvar | waht a weird question to ask on a voip channel |
| 09:08.59 | wasim | syle: yes |
| 09:09.01 | Dr_Ray | well, there is nothing stopping * from doing video |
| 09:09.32 | Dr_Ray | and * is not limited to a voip product |
| 09:10.54 | *** part/#asterisk Akelavlk (n=jansun@82.119.239.141) |
| 09:12.42 | jhiver | has anybody tried Xorcom with Sangoma's or Digium's single PRI card? |
| 09:13.30 | Dr_Ray | it should work |
| 09:13.43 | Dr_Ray | I mean tor2 is pretty brainless |
| 09:13.52 | jhiver | I wonder which card to go for... |
| 09:14.09 | jhiver | I know it's cool supporting Digium and all but I'll do that through g.729 licenses anyways :) |
| 09:14.12 | Dr_Ray | what do you want to do? |
| 09:14.51 | jhiver | Well I've gotten AstCC customized and 'frenchized' and now I want to do some CC |
| 09:15.23 | Dr_Ray | you going to hook to a PRI? |
| 09:15.36 | jhiver | Well yeah, I don't see any other way |
| 09:15.48 | jhiver | I mean, a calling card that has only one channel is pretty useless |
| 09:15.59 | jhiver | so I can't use my TDM400P to start with |
| 09:16.10 | Dr_Ray | well, you could buy IAX minutes |
| 09:16.14 | jhiver | otherwise I would have started cheap with 4 channels :) |
| 09:16.33 | jhiver | but I can't ask my users to dial an international number! |
| 09:16.56 | Dr_Ray | oh |
| 09:16.59 | jhiver | I'm not in the states or anything with decent VoIP servicing :) |
| 09:17.04 | Dr_Ray | I hear you |
| 09:17.14 | jhiver | so it's PRI... or PRI :) |
| 09:17.50 | jhiver | I think I'll get a fraction of a PRI to start with, maybe 10 channels, and then see how it goes |
| 09:17.53 | Dr_Ray | and a little bit of VOIP servicing on the side :) |
| 09:18.21 | jhiver | yeah I might do some asterisk hosting just because I can |
| 09:18.47 | jhiver | I have a 1 Mbps SDSL and 16 I.P. addresses so once I have the PRI, why not :) |
| 09:19.35 | jhiver | At any rate, I'm still wondering which card I should go for |
| 09:20.39 | RoyK | http://karlsbakk.net/fun/hand-foot-fun.html |
| 09:40.04 | *** join/#asterisk folsson (n=filip@h82n1fls32o985.telia.com) |
| 09:44.18 | KeX_WorX | hi |
| 09:44.26 | KeX_WorX | anyone uses minisip with asterisk ? |
| 09:45.05 | *** join/#asterisk smurfix_ (n=smurf@debian/developer/smurf) |
| 09:47.03 | *** join/#asterisk ajpb (n=a@10.67.2.81.in-addr.arpa) |
| 09:47.20 | ajpb | anybody got any idea how to get ast_data to cleanly patch 1.0.9 ? |
| 09:47.21 | *** join/#asterisk smurfix (n=smurf@debian/developer/smurf) |
| 09:51.26 | *** join/#asterisk Johnsie (n=john@acs-24-154-53-217.zoominternet.net) |
| 09:51.42 | *** join/#asterisk HitkLif (n=ALpHA@193.41.182.11) |
| 09:52.02 | KeX_WorX | no1 uses minisip ? |
| 10:00.18 | *** join/#asterisk Zeeek (n=icechat5@pdpc/supporter/active/Zeeek) |
| 10:01.09 | *** join/#asterisk RoyK (n=roy@80.239.107.80) |
| 10:01.10 | Zeeek | astro |
| 10:02.41 | RoyK | gastro |
| 10:04.01 | Zeeek | intestinal |
| 10:05.29 | *** join/#asterisk gres (n=serg@212.113.111.65) |
| 10:12.05 | Dr_Ray | fortitude |
| 10:17.37 | ajpb | anybody help a person with receding hair patch 1.0.9 with ast-data? |
| 10:18.00 | RoyK | anti-hearloss patch? |
| 10:18.05 | ajpb | lol |
| 10:18.10 | RoyK | hair, even |
| 10:18.29 | RoyK | ~seen oej |
| 10:18.31 | jbot | oej <n=Olle@apollo.webway.se> was last seen on IRC in channel #asterisk, 1d 3h 40m 39s ago, saying: 'mog_home: Yes, trying to catch up after travelling and being off-line for a while.'. |
| 10:20.37 | ajpb | so, |
| 10:20.49 | ajpb | in #asterisk, nobody has a mysql configged setup? |
| 10:21.37 | RoyK | ajpb: realtime isn't supported in 1.0 |
| 10:21.43 | ajpb | erh? |
| 10:21.46 | ajpb | we had it working :) |
| 10:21.54 | ajpb | mysql with ast_data |
| 10:21.55 | RoyK | to use mysql users with 1.0, you need mysql sipfriends |
| 10:21.58 | RoyK | hm |
| 10:21.58 | RoyK | ok |
| 10:22.03 | RoyK | we use sipfriends |
| 10:22.07 | ajpb | one oddthing :- |
| 10:22.09 | RoyK | that's a dirty hack but it works |
| 10:22.23 | ajpb | ast_data download site : svn.asteriskdocs.org is now gone |
| 10:22.24 | ajpb | ;< |
| 10:22.30 | ajpb | had to get a friend to email it to me |
| 10:23.44 | KeX_WorX | RoyK, u told me yesterday, that incominglimit is deprecated and that i should use groups instead. Can't find how to do that with groups. Can u give me a hint pls? |
| 10:24.44 | RoyK | http://www.voip-info.org/wiki-Asterisk+cmd+SetGroup |
| 10:24.57 | ajpb | does 1.0.9 have mysql config integrated? |
| 10:24.58 | RoyK | see the example there |
| 10:25.54 | RoyK | ajpb: more or less. you need to enable it in channels/Makefile |
| 10:26.40 | RoyK | http://www.voip-info.org/tiki-index.php?page=Asterisk%20sip%20mysql%20peers |
| 10:27.03 | ajpb | problem i've got is |
| 10:27.11 | ajpb | an old version - prob 1.0.0 was configured with ast_dat |
| 10:27.11 | ajpb | a |
| 10:27.17 | ajpb | server died, |
| 10:27.31 | ajpb | bad time to realise although all your data was backed up, your asterisk build wasn't |
| 10:27.38 | RoyK | And No Real Men Back Up Their Data |
| 10:27.40 | RoyK | :) |
| 10:27.50 | ajpb | and in any case installing new version of fedora would have stopped working anyway [diff kernel] |
| 10:28.04 | ajpb | so |
| 10:28.08 | ajpb | Fedora core 4 |
| 10:28.12 | ajpb | new install of asterisk |
| 10:28.15 | ajpb | database tables in place |
| 10:28.22 | ajpb | now need to get it back working again... |
| 10:28.23 | RoyK | No Sane Person Runs Fedora In Production |
| 10:28.26 | ajpb | without crying too much |
| 10:28.44 | ajpb | i like fedora, and i know lots of (more-or-less) sane people who run it in production |
| 10:28.46 | RoyK | well. if you can't get ast_data.... |
| 10:29.01 | RoyK | fedora is redhat's beta tree :) |
| 10:29.11 | ajpb | in some senses , yes |
| 10:29.13 | *** join/#asterisk gonzo- (n=gonzo@195.140.246.50) |
| 10:29.33 | ajpb | loooads of people use it anyway |
| 10:29.43 | ajpb | it's probably the most commonly installed distro these days |
| 10:31.17 | *** join/#asterisk Moc (n=mochouin@modemcable173.101-70-69.mc.videotron.ca) |
| 10:32.27 | Moc | morning... and night all |
| 10:37.52 | *** join/#asterisk christo (n=chris@195.82.114.14) |
| 10:37.52 | christo | morning all |
| 10:39.04 | Dr_Ray | Moc - ever mess with call files? |
| 10:40.23 | *** join/#asterisk Thoran (n=Thoran@p54A5A560.dip0.t-ipconnect.de) |
| 10:40.39 | Thoran | Hello everyone |
| 10:42.54 | KeX_WorX | thanks RoyK. I'll try this |
| 10:45.35 | *** join/#asterisk DannyF (n=dannyf@c-794fe353.24-0099-74657210.cust.bredbandsbolaget.se) |
| 10:45.57 | DannyF | lo folks |
| 10:47.04 | *** join/#asterisk Jzalae (n=sk@216-220-248-190.midmaine.com) |
| 10:47.36 | *** join/#asterisk NirS (n=NirS@eventhorizon.hosting365.ie) |
| 10:47.39 | NirS | hey all |
| 10:47.40 | NirS | anybody home ? |
| 10:48.17 | NirS | hello ? |
| 10:48.23 | NirS | is everybody sleeping ? |
| 10:48.30 | DannyF | almost ;) |
| 10:48.55 | *** join/#asterisk mistral (i=mistral@jstevenson.plus.com) |
| 10:52.13 | *** join/#asterisk RoyKa (n=roy@80.239.107.70) |
| 10:52.46 | NirS | danny, you have experience with Cisco 7960 phones ? |
| 10:52.59 | *** join/#asterisk Attila_Kovacs (n=kovacsat@dsl51B678A6.pool.t-online.hu) |
| 10:53.02 | NirS | the little shit is somewhat a f** to configure |
| 10:54.46 | Attila_Kovacs | Hi All! Anybody faced the one way voice problem with misdn channel? |
| 10:55.21 | Attila_Kovacs | HFC card in NT, PmP mode |
| 10:56.19 | Attila_Kovacs | One ISDN phone is connected, if I call the phone it's ok, but when I call from the phone there is no voice. |
| 11:03.07 | RoyK | Attila_Kovacs: what does pri debug say? |
| 11:07.20 | *** join/#asterisk MuppetMaster (n=MuppetMa@62.37.169.209) |
| 11:07.29 | MuppetMaster | Hello everyone. |
| 11:07.40 | *** join/#asterisk clive- (n=pirch@ndn-165-137-206.telkomadsl.co.za) |
| 11:07.56 | RoyK | MuppetMaster: hi |
| 11:08.08 | MuppetMaster | What is the URL for posting log files and then linking to them? |
| 11:08.15 | MuppetMaster | So one does not flood the IRC? |
| 11:08.21 | RoyK | ~pastebin |
| 11:08.23 | jbot | pastebin is, like, a place to paste your stuff without flooding the channel - try http://pastebin.ca/ |
| 11:08.29 | MuppetMaster | That is right, thanks. |
| 11:14.30 | DannyF | hum realtime queues is not loaded on startup of * |
| 11:14.34 | DannyF | yay |
| 11:14.42 | joelsolanki | Hi all, any body using nathelper+rtpproxy |
| 11:15.09 | joelsolanki | Just want to know for supporting nat i have to use nathelper + rtpproxy ..? |
| 11:16.23 | *** part/#asterisk MuppetMaster (n=MuppetMa@62.37.169.209) |
| 11:18.19 | *** join/#asterisk tzafrir_laptop (n=tzafrir@bzq-179-75-202.cust.bezeqint.net) |
| 11:18.31 | *** join/#asterisk dyn (n=dyn@unaffiliated/dyn) |
| 11:18.39 | dyn | hello |
| 11:18.48 | DannyF | what in heavens name do I need to add to have the farking queues loaded from realtime queues table at * startup.... |
| 11:19.22 | sivana | DannyF: I think the queues are broke |
| 11:19.27 | *** join/#asterisk malabar (n=mala@bkkb-gw.bitcon.no) |
| 11:19.41 | sivana | with static members, the retry parameter is ignored |
| 11:19.45 | dyn | i'd like to ask some help with setting up a Diva ISDN card with capi. |
| 11:20.00 | DannyF | AddQueueMember sure pukes |
| 11:20.01 | *** part/#asterisk malabar (n=mala@bkkb-gw.bitcon.no) |
| 11:20.14 | dyn | I think I need to load a firmware for such a card, right? |
| 11:20.17 | *** join/#asterisk malabar (n=mala@bkkb-gw.bitcon.no) |
| 11:20.32 | sivana | ya, the developers are more focus code clean up, like formatting and stuff |
| 11:20.33 | *** join/#asterisk RoyK (n=roy@80.239.107.70) |
| 11:20.56 | DannyF | was supposed to be fixed ages ago per the http://bugs.digium.com/view.php?id=4037 |
| 11:21.20 | sivana | don't bitch though, unless you're going to fix it yourself :) |
| 11:21.31 | DannyF | yeah i know |
| 11:21.35 | DannyF | I'm just stumped |
| 11:21.44 | sivana | yea, it's amazing |
| 11:21.53 | DannyF | I *finally* got my arse in gear and begun moving into realtime *grin* |
| 11:21.55 | clive- | dyn what linux version? |
| 11:22.07 | dyn | clive-: i'm on gentoo |
| 11:22.09 | DannyF | and of course it's broken |
| 11:22.17 | clive- | dyn which kernel |
| 11:22.19 | dyn | clive-: using 2.6.12 currently |
| 11:22.46 | clive- | dyn afaik 2.6.12 should include the drivers for capi for the card |
| 11:22.49 | sivana | DannyF: I think realtime is kind of lame myself, but what do I know |
| 11:22.53 | DannyF | sivana, reason why I did it was the app_queue commit in the cvs on the 29th broke static queues |
| 11:23.10 | dyn | clive-: i compiled and loaded diva_mnt - it is it, aint it |
| 11:23.14 | sivana | DannyF: oh, that's an easy fix |
| 11:23.14 | clive- | dyn check the wiki, there are good install instructions there |
| 11:23.26 | sivana | just remove the 5 lines that was committed |
| 11:23.26 | DannyF | i.e no realtime members logged in, exit... |
| 11:23.31 | sivana | yup |
| 11:23.44 | clive- | I have it on 2.4.x so I had tocompile sources |
| 11:23.48 | DannyF | yeah I know, but it kinda made me say "Ok lets finish the realtime move" |
| 11:23.50 | DannyF | weee |
| 11:23.52 | dyn | clive-: i'm reading the wiki for over 3 days ;) |
| 11:24.22 | dyn | clive-: is there any way to determine if my card is recognized and the capi driver started successfully? (a new entry in proc or dev maybe?) |
| 11:24.55 | dyn | clive-: well, dmesg | grep -i diva gives stuff like "Eicon DIVA - CAPI Interface driver (http://www.melware.net) |
| 11:24.56 | dyn | " |
| 11:25.01 | clive- | dyn then just start trying, . try every option, and also use the chan_capi from sourceforge, not the 0.3.5 version |
| 11:25.25 | dyn | clive-: i grabbed chan_capi 0.4.0pre1 via portage |
| 11:25.33 | DannyF | sivana, it's a tad odd thou, cuz the queues gets loaded when a call is made to go into the queues (which of course is empty because AddQueueMemeber cant add interfaces to the queue) |
| 11:25.34 | clive- | did you load the card using divactrl ? |
| 11:25.45 | dyn | clive-: i had 0 success with divactrl |
| 11:25.55 | clive- | so sounds like it working |
| 11:26.01 | clive- | try phone someone |
| 11:26.10 | sivana | DannyF: all from the last committ? |
| 11:26.15 | dyn | i tried " divactrl load -c 1 -f ETSI |
| 11:26.15 | dyn | " and it says "A: can't get card type for DIVA adapter number 1" |
| 11:26.23 | clive- | oh |
| 11:26.39 | dyn | clive-: also asterisk says "Sep 30 13:12:49 WARNING[2735]: chan_capi.c:2733 load_module: CAPI not installed, CAPI disabled!" |
| 11:26.39 | DannyF | sivana, its a catch 22 |
| 11:26.40 | clive- | what card you fgot |
| 11:26.55 | dyn | clive-: it's the Diva Server 3.0 PCI |
| 11:27.26 | dyn | so i'm sure i did not load any firmware so far (but it's placed to /usr/share/eicon/) |
| 11:27.42 | dyn | and i guess i would load the firmware and start the card first.. or..? |
| 11:27.42 | clive- | server 3.0 ??? whats that a PRI card? |
| 11:27.59 | dyn | erm |
| 11:28.03 | dyn | i'll double check |
| 11:29.01 | clive- | dyn, drop armin an email, he is the eicon/capi guru |
| 11:29.27 | clive- | once you get it working, it runs liek a dream, they are brilliant cards |
| 11:30.30 | dyn | clive-: armin? |
| 11:31.26 | dyn | at ..? |
| 11:32.35 | *** join/#asterisk nesys (n=nesys@2001:1418:1a6:0:20d:93ff:fe28:3ef8) |
| 11:45.40 | *** join/#asterisk coppice (n=chatzill@36.196.17.210.dyn.pacific.net.hk) |
| 11:48.36 | *** join/#asterisk tatuman (n=Miranda@joltid-gw.joltid.org) |
| 11:48.42 | tatuman | Hi |
| 11:49.46 | tatuman | Anyone know if it is possible to have some sort of load balancing mechanism for meetme in order that when the cpu goes like to 80 %, the client is redirected to another asterisk server |
| 11:50.37 | tatuman | and that if is possible to make a meetme conference to act as a sip client, in order to connect to other meetme conference in other asterisk server |
| 11:51.09 | *** join/#asterisk puzzled (n=patrick@puzzled.xs4all.nl) |
| 11:51.25 | puzzled | hi |
| 11:51.53 | tatuman | anyone can help me with that questions? |
| 11:53.18 | *** join/#asterisk Blazint (n=blazin@cm225.epsilon203.maxonline.com.sg) |
| 11:54.29 | *** join/#asterisk Simon- (i=byte@2001:4bd0:1000:0:202:44ff:fe47:d3ee) |
| 11:58.59 | tatuman | is anyone here? |
| 11:59.50 | shanky | tatuman: I'm, but I have no idea about your questions |
| 12:00.40 | johnm | tatuman: Im sure you could write something to do it, there isn't a reason wh it cant. But I doubt anythng is out there for it |
| 12:00.44 | johnm | should be fairly simple |
| 12:02.00 | *** join/#asterisk ful|work (n=fulgas@213.58.130.46) |
| 12:02.06 | tatuman | the thing is, there is no documentation of app_meetme, and the code is not so commented, |
| 12:02.27 | tatuman | do u know anyone who understands alot of the meetme architecture? |
| 12:04.11 | *** join/#asterisk lathos42 (n=lathos42@65-42-27-66.dowdingindustries.com) |
| 12:04.20 | lathos42 | Morning |
| 12:06.16 | *** join/#asterisk FeliXdk (i=felix@bnc.activewebs.dk) |
| 12:06.41 | *** join/#asterisk dyn (n=dyn@unaffiliated/dyn) |
| 12:14.37 | *** part/#asterisk clive- (n=pirch@ndn-165-137-206.telkomadsl.co.za) |
| 12:15.01 | *** join/#asterisk Ariel_ (n=Ariel@adsl-068-157-125-248.sip.mia.bellsouth.net) |
| 12:15.21 | johnm | tatuman: best bet is the wiki + mailing list tbh. |
| 12:17.33 | dyn | anyone can confirm if a Diva 2.01 S/T PCI card will work with asterisk or not? |
| 12:17.43 | dyn | is it an active card at all? |
| 12:21.29 | *** join/#asterisk bjohnson (n=bjohnson@jecinc.tor.istop.com) |
| 12:27.39 | *** join/#asterisk IPmonger (n=ipmonger@pcp0010577106pcs.coatsv01.pa.comcast.net) |
| 12:31.11 | Dr_Ray | ok, I finished the Asterisk : The Future of Telephony book |
| 12:31.14 | Dr_Ray | go buy it |
| 12:32.32 | iDunno | it's being delivered sometime in the next few days \o/ |
| 12:33.21 | Dr_Ray | I'm very happy with it |
| 12:33.30 | mmlj4 | better than the yellow book, i hope? |
| 12:33.38 | Dr_Ray | I've never cracked teh yellow book |
| 12:33.54 | mmlj4 | well, the guy can't write |
| 12:34.06 | Dr_Ray | heh, a common affliction of internet users |
| 12:34.16 | mmlj4 | it's painful to read |
| 12:34.55 | Dr_Ray | but I've learned lots and lots from the O'Reilly book |
| 12:35.05 | coppice | O'Really? |
| 12:35.09 | mmlj4 | heh |
| 12:35.21 | Dr_Ray | O'Course! |
| 12:36.09 | coppice | The Future of Telephony sounds a bit pretencious |
| 12:36.20 | Dr_Ray | there are sections that are like that |
| 12:36.29 | Dr_Ray | They make some bold predictions |
| 12:36.37 | Dr_Ray | akin to Os/2 and Howard Dean.. |
| 12:36.42 | Dr_Ray | but they may be right |
| 12:37.30 | coppice | so might the pundit proping up the bar at the local pub. almost anything is possible :-) |
| 12:37.47 | Dr_Ray | Like any evangelical book, that part is a bit much.. but the information is laid out and concise |
| 12:38.21 | Dr_Ray | I'll hit this book first, then the wiki |
| 12:39.40 | *** join/#asterisk zebigboss (n=harry@tor/session/x-aee0157965c42278) |
| 12:40.45 | zebigboss | <PROTECTED> |
| 12:40.50 | zebigboss | This is driving me crazy. |
| 12:41.01 | Dr_Ray | say it like a a pirate |
| 12:41.09 | Theuni | arrrrrr |
| 12:41.14 | Dr_Ray | it's driving me nuts |
| 12:41.33 | zebigboss | does this have something to do with insecury=very? |
| 12:48.18 | Ariel_ | morning folks |
| 12:48.36 | Dr_Ray | morning |
| 12:54.11 | bjohnson | OMG. Just got a "support" response that blamed software problems on the Sempron chip |
| 12:54.16 | bjohnson | This problem may be due to the AMD Processor. We have tested CADopia IntelliCAD on computers with the Pentium series of processors. So we recommend you to use Pentium P4 and above processor. |
| 12:54.29 | Theuni | hehe |
| 12:54.48 | Delvar | could be, if cad uses instruction set not in the cut down amd |
| 12:55.04 | coppice | the sempron isn't cut down |
| 12:55.16 | bjohnson | wouldn't you think they'd have that in big letters somewhere? |
| 12:55.29 | Delvar | sepron is what they call the duron now? |
| 12:55.34 | Dr_Ray | or a special version for that cpu |
| 12:55.54 | coppice | the sempron can also be an AMD64 chip |
| 12:56.10 | Delvar | oh didnt know that... /me out of loop a while |
| 12:56.20 | *** join/#asterisk MikeJ[Laptop] (n=ircatjer@mi.origenfinancial.com) |
| 12:56.34 | Delvar | amd64 supports everything p4 does doesnt it? |
| 12:56.36 | dyn | if i have to use the HiSax driver which uses the old isdn4linux code.. then CAPI is not available for me, or..? |
| 12:56.37 | bjohnson | they go to the effort to develop a wine compatible version so it can run on linux, but they can't get it to run on a Sempron running XP |
| 12:56.54 | coppice | there are no socket 462 chips any more. some semprons are AMD64 chips crippled to 32 bits. some are real 64 bit chips |
| 12:57.13 | bjohnson | this isn't a AMD64 (although it may be a crippled one) |
| 12:57.19 | bjohnson | bought it about a month ago |
| 12:57.23 | mutilator | crippled? |
| 12:57.30 | mutilator | how many people actually even use 64bits |
| 12:57.33 | mutilator | like 1% |
| 12:57.36 | coppice | Delvar: Everything from the older P4. Only the latest AMD chips support the extra stuff in prescott chips |
| 12:57.38 | Delvar | yup |
| 12:57.43 | coppice | I use 64 bit |
| 12:58.09 | coppice | surely anyone running linux on a 64 bit capable chip uses it that way |
| 12:58.21 | bjohnson | to some extent |
| 12:58.37 | RoyK | i have a few xeon64 servers with 32bit OS .... |
| 12:58.46 | bjohnson | win98? |
| 12:58.49 | Delvar | lol |
| 12:58.50 | RoyK | lol |
| 12:58.52 | mmlj4 | i use probably 45 bits |
| 12:59.02 | mutilator | O_o |
| 12:59.08 | *** join/#asterisk zotz (n=zotz@24.231.36.100) |
| 12:59.25 | RoyK | bjohnson: no. the linux distro didn't install in 64bit mode, and i haven't reinstalled them since they're in use and, well, work |
| 12:59.26 | bjohnson | I choose to use 62 bits .. needed 2 bits for a shave and a haircut |
| 12:59.29 | mmlj4 | actually, i have a 64-bit box, but it's too bloody loud to stick on my desk |
| 12:59.52 | coppice | get an AMD64 machine - cool and quiet |
| 12:59.52 | MikeJ[Laptop] | bjohnson, nice |
| 13:00.13 | bjohnson | I thought I'd splurge for my anniversary |
| 13:00.15 | Delvar | well ill be upgrading sometime soon :) |
| 13:00.22 | bjohnson | after all, 2 bits IS 2 bits |
| 13:00.29 | RoyK | single bit OS |
| 13:00.41 | coppice | I remember when computers used to have many thousands of bits |
| 13:00.46 | Dr_Ray | I can't think of any reason to go to 64bit (for me) |
| 13:00.59 | coppice | RoyK: I used to use a 1 bit OS :-) |
| 13:01.06 | Delvar | yeah me eithr... exept novalty.. im a windows slut |
| 13:01.14 | Dr_Ray | even with linux |
| 13:01.20 | Dr_Ray | there is not a killer app for it yet |
| 13:01.39 | *** join/#asterisk pa (n=Paolo@unaffiliated/pa) |
| 13:01.41 | Delvar | yep and wont be for a while... |
| 13:01.48 | Delvar | not till you get 64bit only games |
| 13:01.51 | coppice | well my AMD X2 machine is far faster with 64 bit FC4 than with 32 bit FC4, but I haven't investigated the reasons |
| 13:02.21 | Dr_Ray | coppice - well that could be a good reason to upgrade.. |
| 13:02.24 | *** part/#asterisk nesys (n=nesys@2001:1418:1a6:0:20d:93ff:fe28:3ef8) |
| 13:02.48 | Dr_Ray | I've just started writing Java software again and waiting 24 minutes for all my classes to compile.. |
| 13:03.02 | coppice | and with either OS, it makes by dual 2.4GHz xeon machine look very sick |
| 13:03.51 | *** join/#asterisk gambolputty (n=gambolpu@72.240.241.108) |
| 13:08.37 | iDunno | both my personal machines are amd64s |
| 13:08.43 | mmlj4 | Dr_Ray: java = write once, run away |
| 13:09.56 | Dr_Ray | mml, but I'm creating my application in one big text file for right now |
| 13:10.09 | *** join/#asterisk Katty (n=katrina@68-112-15-110.dhcp.cpgr.mo.charter.com) |
| 13:10.15 | mmlj4 | i guess |
| 13:10.20 | Katty | mew. |
| 13:10.27 | mmlj4 | learn perl and be happy |
| 13:10.35 | iDunno | python! |
| 13:10.40 | iDunno | python is the way forwards! |
| 13:10.51 | Katty | did i just walk into the middle of a programming language war? |
| 13:10.52 | Dr_Ray | I know perl, and perl wont do what I want (well) |
| 13:10.52 | mmlj4 | or even PHP, at least you won't have to compile your stuff |
| 13:11.14 | mmlj4 | um, i'm sure perl will, check CPAN |
| 13:11.48 | Dr_Ray | I'm trying to write a game, and java will let it run on multiple platforms fairly easily.. |
| 13:11.57 | Katty | Dr_Ray: j2me game? |
| 13:12.01 | mmlj4 | hmm... |
| 13:12.02 | T0aD | do you know where i can find specifications of dial plans strings please ? |
| 13:12.03 | mmlj4 | maybe |
| 13:12.10 | Dr_Ray | WxWidgets for perl is not quite what I need |
| 13:12.21 | T0aD | they are talking about some MGCP NCS specification but I cannot find anywhere |
| 13:13.04 | Dr_Ray | I like perl a great deal, but perl is not suited for this |
| 13:13.25 | coppice | T0aD: MGCP dialplans are in the MGCP spec |
| 13:18.18 | *** join/#asterisk NoNeo (n=Artur@193.24.24.10) |
| 13:19.03 | T0aD | im looking for them |
| 13:20.32 | iDunno | python + tk :) |
| 13:21.33 | tzanger | I thought it g729 was more protected by international telecom treaties and not software patents? |
| 13:22.37 | Dr_Ray | esp when g729 is cheap |
| 13:22.47 | Dr_Ray | $$$ not computation-wise |
| 13:22.53 | tzanger | yes g729 licensing through Digium is quite inexpensive |
| 13:23.46 | Dr_Ray | I'm giving serious thought to buying it for our payphone sites.. |
| 13:26.39 | *** join/#asterisk dalabera (n=Dalabera@pmr.pmrtechnologies.com) |
| 13:27.01 | gordonjcp | is it worth using? |
| 13:27.07 | gordonjcp | who else is using G729? |
| 13:27.42 | tzanger | I was |
| 13:27.44 | tzanger | works well |
| 13:28.02 | tzanger | Dr_Ray: unless you have bandwidth issues there is no clear advantage to it and several disadvantages |
| 13:28.25 | Delvar | disadvantage is it costs |
| 13:28.32 | Dr_Ray | I have bandwidth issues.. |
| 13:28.36 | Delvar | next can use lot of cpu in transcoding |
| 13:28.36 | Dr_Ray | at the remote sites |
| 13:28.37 | tzanger | costs, CPU use, you lose a packet you have more of a dropout... |
| 13:28.54 | tzanger | IIRC only generic interpolation is used for packet loss concealment |
| 13:29.18 | tzanger | so the less info per frame the better, and the smaller you can squeeze the audio down the more info there is per frame |
| 13:29.28 | tzanger | (at least simplistically speaking) |
| 13:29.43 | Dr_Ray | the idea is to use least cost routing so the 1st call goes out ulaw, and the next call goes out g729 |
| 13:29.43 | tzanger | Dr_Ray: does something liek gsm not alleviate the issues well enough? |
| 13:29.56 | *** join/#asterisk mephisto_bsd (n=mephisto@ns01.damasio.com.br) |
| 13:29.57 | tzanger | Dr_Ray: that sounds insane, just code everything |
| 13:29.59 | Dr_Ray | tzanger - this would be a worst case scenario |
| 13:30.27 | tzanger | Dr_Ray: just use IAX trunking and gsm, that gives you very reasonable bandwidht use |
| 13:30.31 | Dr_Ray | the idea is to put 24 payphones at a remote site, with an asetrisk box, on a small connection |
| 13:30.40 | tzanger | of course trunking is only useful if you're spewing all calls to one other point |
| 13:30.54 | Dr_Ray | most times only 1 or 2 phones will be in use... |
| 13:30.58 | tzanger | Dr_Ray: you're not hte first I've heard come up with that idea |
| 13:31.07 | tzanger | I honstly don't see much payphone use where I am at |
| 13:31.10 | Dr_Ray | I don't claim to be clever ;) |
| 13:31.37 | Dr_Ray | Our payphones are an amenity |
| 13:31.41 | Dr_Ray | not a profit center |
| 13:31.53 | tzanger | heh |
| 13:32.14 | Dr_Ray | like you can get the leasing office buy dialing 711 |
| 13:32.29 | Dr_Ray | to get security |
| 13:32.31 | Dr_Ray | etc |
| 13:32.37 | tzanger | right |
| 13:32.46 | Dr_Ray | we do 15 minutes of long distance for $1 |
| 13:33.09 | Dr_Ray | actually, 20 minutes |
| 13:33.37 | Dr_Ray | it's a a phone that will survive better than house phones have |
| 13:36.41 | Dr_Ray | at one of our properties we are going to try replacing the door phone with a payphone |
| 13:39.21 | *** join/#asterisk sphing (n=sphing@n128-227-82-250.xlate.ufl.edu) |
| 13:40.49 | *** join/#asterisk toddf (n=toddf@ns0.fries.net) |
| 13:42.05 | ajpb | anyone know what this means ? |
| 13:42.05 | ajpb | Sep 30 14:40:37 WARNING[25345]: pbx.c:1403 pbx_extension_helper: No application 'MYSQL' for extension (internal, 1102, 1) |
| 13:42.05 | ajpb | <PROTECTED> |
| 13:42.06 | ajpb | <PROTECTED> |
| 13:42.07 | ajpb | Sep 30 14:40:37 WARNING[25345]: pbx.c:1403 pbx_extension_helper: No application 'MYSQL' for extension (end-call, h, 1) |
| 13:42.10 | ajpb | ?? |
| 13:42.29 | swm_ | ITS A FUCKING MIRACLE! |
| 13:42.51 | swm_ | Check this out everyone.... |
| 13:43.39 | Dr_Ray | it's areleady overhyped |
| 13:43.44 | Dr_Ray | there is no way it' |
| 13:43.49 | swm_ | I bought a Intel SE7500WV2 Motherboard from Intel 4 months ago, along with 1 GB of memory, 2 - 2.0 Ghz XEON Processors / Stepping class D, ... and a SCSI card to use it in a SR2200 rackmount case... |
| 13:43.57 | tzanger | RMS is fucking up the GPL |
| 13:44.17 | tzanger | swm_: ok? |
| 13:44.27 | swm_ | Processors and SCSI drives had alot of conflicts with the whole setup, Stepping D was not supported, intel discontinued the board in 2004 |
| 13:45.01 | tzanger | send it back |
| 13:45.04 | Thoran | Is there a way to tell asterisk not to use # for tranfering calls ? I want to open a door with DTMF and it wants #8# as the door combo |
| 13:45.10 | Dr_Ray | that's right up there with the grill cheese sandwhich that looked like the virgin mary |
| 13:45.32 | swm_ | But they released a Bios update and HSC update for the SCSI,. Stepping D is now supported and the drives work. Total luck... Shocked. Now I have multi-processor support at 7956 Bogomips!!!! -and- all 6 scsi drives work instead of -one- |
| 13:45.48 | Thoran | nice swm :) |
| 13:45.49 | *** join/#asterisk yartelecom (n=no-email@82.211.138.63) |
| 13:45.52 | *** join/#asterisk file[laptop] (n=jcolp@mctnnbsa31w-142166115000.nb.aliant.net) |
| 13:45.56 | iDunno | swm_: wooo! |
| 13:46.00 | Dr_Ray | Thoran - I had #8663 in my dialpane and it worked |
| 13:46.06 | *** part/#asterisk sphing (n=sphing@n128-227-82-250.xlate.ufl.edu) |
| 13:46.17 | Thoran | dialpane ? |
| 13:46.21 | *** join/#asterisk zoa (n=kkk@pirus.securax.be) |
| 13:46.25 | zoa | hoooooooooooooooo |
| 13:46.26 | Dr_Ray | dialplan |
| 13:46.29 | Dr_Ray | too much coffee |
| 13:46.32 | Thoran | :) |
| 13:46.45 | Thoran | I am not sure I understand the answer then :) |
| 13:46.52 | zoa | hello folks |
| 13:46.58 | RoyK | morning, zoa |
| 13:47.00 | MikeJ[Laptop] | hello zoa |
| 13:47.02 | RoyK | afternoon, even |
| 13:47.04 | swm_ | Just sitting back in a really good mood right now! Totally blown away ... thought I would never see both processors working... Shocked.. Amazed. just in total awe... Woo Hooiesss... 2 Hours till Grand Jury Duty... |
| 13:47.06 | Thoran | dialplan means extensions.conf for me atm |
| 13:47.07 | Dr_Ray | you can use # in your extensions |
| 13:47.12 | Dr_Ray | .conf |
| 13:47.25 | Dr_Ray | you can use ABCD as well |
| 13:47.35 | Thoran | I want to be able to press # while being on the phone |
| 13:47.44 | Thoran | without asterisk wanting to transfer |
| 13:48.00 | darkskiez | whats ABCD actually used for anyway? |
| 13:48.10 | tzanger | darkskiez: channel status |
| 13:48.22 | tzanger | oh sorry I thought you were talking about RBS bits |
| 13:48.29 | Dr_Ray | some old military phones had ABCD keys |
| 13:48.31 | tzanger | ABCD are usually used where you don't hear them |
| 13:48.34 | tzanger | yeah |
| 13:48.36 | zoa | who is going to astricon here ? |
| 13:48.46 | Thoran | So I get a call from the door |
| 13:48.47 | cpatry | zoa: me :) |
| 13:48.55 | Thoran | They guy there is telling me who he is |
| 13:48.56 | Dr_Ray | my buttsett has ABCD on them, so I used them |
| 13:48.57 | MikeJ[Laptop] | zoa, I think oej is ;)( |
| 13:49.01 | MikeJ[Laptop] | errr |
| 13:49.02 | MikeJ[Laptop] | ;) |
| 13:49.05 | Thoran | I want to press #8# and the door opens |
| 13:49.06 | *** join/#asterisk LL-CoolJ (n=admin@digitaldatabits.net) |
| 13:49.07 | Thoran | problem is |
| 13:49.16 | Thoran | asterisk tellms me no extension then |
| 13:49.19 | MikeJ[Laptop] | that;s not really ll-coolj is it? |
| 13:49.21 | MikeJ[Laptop] | heh |
| 13:49.23 | *** join/#asterisk Goshen (n=Goshen@c-67-172-238-57.hsd1.ut.comcast.net) |
| 13:49.28 | Thoran | because the # is used to transfer calls |
| 13:49.32 | LL-CoolJ | Whadup Yo. |
| 13:49.38 | Thoran | so i want to use like the * for transfers |
| 13:49.45 | Dr_Ray | then transfer it to extension 8 and make that open the door |
| 13:50.01 | darkskiez | Thoran: cvs head and features.conf |
| 13:50.03 | Thoran | huh ? |
| 13:50.11 | LL-CoolJ | Gimmie some skin bro! I'm goin back to cali |
| 13:50.15 | Thoran | I have no influence on the door open mechanism |
| 13:50.23 | Thoran | Thats inside a siemens pbx |
| 13:50.34 | LL-CoolJ | Hold on, gotta get this blunt rolled up |
| 13:50.35 | darkskiez | I changed transfer to ## so you could press # when you called another menu system |
| 13:50.37 | Katty | hhmm. |
| 13:50.47 | Thoran | dark: how ? |
| 13:50.53 | Dr_Ray | make extension 8, on your dialplan dial the door and give it the open code |
| 13:50.54 | *** join/#asterisk FABRIZIOxxx (n=FABRIZIO@81-208-26-86.ip.fastwebnet.it) |
| 13:50.58 | darkskiez | Thoran: what i just said |
| 13:51.35 | Thoran | I can't call the door |
| 13:51.50 | Thoran | what do I have to enter in the features.conf ? |
| 13:51.50 | tzanger | heh |
| 13:52.01 | tzanger | what do you call a dog with no legs? Don't matter, he won't come. |
| 13:52.11 | Dr_Ray | 2nd base |
| 13:52.13 | FABRIZIOxxx | hey guys .. i have a big problem.. 2 tdm 04b on a server and i oftem get chopped up sound from the pstn lines... it seems as though the server cant handle it .. but the load on the machine is practically 0 .. what could it be?? |
| 13:52.28 | tzanger | FABRIZIOxxx: irq sharing? |
| 13:52.32 | tzanger | shitty network card? |
| 13:52.33 | Dr_Ray | IRQ |
| 13:52.40 | Dr_Ray | run zttest? |
| 13:52.43 | tzanger | tweaked-out Gentoo ricer kernel? |
| 13:52.58 | FABRIZIOxxx | tzanger .. ill try right now |
| 13:53.09 | Thoran | dark ? |
| 13:53.16 | LL-CoolJ | Someone wanna help my techie get this voip stuff working? |
| 13:53.18 | Thoran | which feature command ? |
| 13:53.36 | Dr_Ray | $50/hr |
| 13:53.56 | LL-CoolJ | Yah I dont think so dogg |
| 13:54.08 | FABRIZIOxxx | tzanger, zare there some docs on how to interpetate zttest results ..? |
| 13:54.42 | FABRIZIOxxx | i mean .. how do i use it? |
| 13:54.44 | Thoran | darkskie? |
| 13:54.51 | FABRIZIOxxx | i can see a bunch of percentages.. |
| 13:55.18 | Dr_Ray | I thought $50 an hour was more than reasonable |
| 13:55.30 | tzanger | FABRIZIOxxx: not really. you want a CONSISTENT value more than a 100.0000% value |
| 13:55.32 | Dr_Ray | not as reasonable as do it for freee |
| 13:55.37 | fenlander | sounds cheap to me |
| 13:55.38 | swm_ | Goin back to cali, goin back to cali, goin back to cali, I dont think so... |
| 13:55.45 | tzanger | $50/hr is reasonable |
| 13:55.51 | tzanger | I bill out at $75 and onsite at $95 |
| 13:56.07 | Dr_Ray | I won't do onsite |
| 13:56.21 | FABRIZIOxxx | tzanger, ok .. its always showing 99.987793 % .. is this ok?? |
| 13:56.30 | Katty | hmm. |
| 13:56.39 | tzanger | yup |
| 13:56.40 | Dr_Ray | I think anything above 98% is good enough |
| 13:56.44 | tzanger | cat /proc/interrupts |
| 13:57.01 | FABRIZIOxxx | ok .. so this reduces the problem to the network card right? |
| 13:57.06 | *** join/#asterisk fugitivo (n=ajf@201.255.104.20) |
| 13:57.09 | Dr_Ray | well, sharing |
| 13:57.50 | FABRIZIOxxx | ok .. let me check interrupts .. |
| 13:58.13 | swm_ | I have 2 1000 Mbps ports on the same interrupt lol |
| 13:58.29 | *** join/#asterisk spackle (n=spackle@209.234.83.19) |
| 13:58.29 | FABRIZIOxxx | can i post the result of /proc/interrupts? |
| 13:58.37 | *** join/#asterisk jaiger (n=jaiger@fire.innovationsw.com) |
| 13:58.38 | swm_ | ~pb |
| 13:58.40 | jbot | from memory, pastebin is a place to paste your stuff without flooding the channel - try http://pastebin.ca/ |
| 13:58.50 | FABRIZIOxxx | ok .. |
| 13:59.12 | FABRIZIOxxx | well .. its not at all long .. its about 9 lines |
| 13:59.17 | swm_ | ~pb |
| 13:59.19 | jbot | extra, extra, read all about it, pastebin is a place to paste your stuff without flooding the channel - try http://pastebin.ca/ |
| 13:59.32 | Dr_Ray | I would just disable stuff you don't need, USB, SERIAL, PRINTER.. etc |
| 13:59.58 | RoyK | ~pb |
| 13:59.59 | jbot | [pastebin] a place to paste your stuff without flooding the channel - try http://pastebin.ca/ |
| 14:00.09 | swm_ | USB is a pain in the ass, never use serial on your linux box, if you need serial get a livingston portmaster. if ya need a printer get a print hub. Heh |
| 14:00.20 | FABRIZIOxxx | jbot, ok .. |
| 14:00.28 | Dr_Ray | well, I use serial to log mitel calls ;) |
| 14:00.37 | swm_ | ~beat FABRIZIOxxx's small weiner |
| 14:00.38 | jbot | ACTION beats FABRIZIOxxx's small weiner with a large stick. |
| 14:01.01 | *** join/#asterisk Delvar (n=irc@host-83-146-53-34.bulldogdsl.com) |
| 14:01.11 | *** join/#asterisk obsidian-studios (n=obsidian@c-66-177-188-197.hsd1.fl.comcast.net) |
| 14:01.14 | johnm | Does anyone have any recommendations for cheap, yet well built 1U rackmount servers for *? |
| 14:01.15 | swm_ | Dr_Ray: Just another IRQ... I have 32 IRQ's |
| 14:01.52 | obsidian-studios | when using 30 second timeout with the dial command that's what 4-5 rings? |
| 14:01.57 | swm_ | johnm: Intel SE7600WV2 Board with a SC1200 1U Rackmount box :) Dual processor board btw... |
| 14:02.06 | johnm | swm_: how much? :) |
| 14:02.13 | spackle | johnm: you mean inexpensive, not cheap - right? |
| 14:02.21 | johnm | spackle: right. |
| 14:02.22 | swm_ | CHEAP? |
| 14:02.24 | swm_ | It's INTEL |
| 14:02.29 | swm_ | It works wonderful |
| 14:02.35 | swm_ | $750 |
| 14:02.43 | johnm | swm_: I could look, but i'll quickly ask. How many oboard nics? |
| 14:02.48 | Dr_Ray | cheap good fast |
| 14:02.56 | swm_ | Two onboard 1 Gigabit nics |
| 14:03.06 | Dr_Ray | woo, that is nice |
| 14:03.11 | johnm | swm_: What size, ATX? |
| 14:03.23 | swm_ | ATX? EPS12V or better |
| 14:03.49 | FABRIZIOxxx | ok .. can anybody help .. put my interrups on http://pastebin.ca/24300 |
| 14:04.15 | johnm | swm_: I'm preferably after something which fits nice in both a 1U rackmount, and a small sized encasement, something like the EPIA micro-ITX boards, but obviously I need something more powerful too.) |
| 14:05.03 | swm_ | Hmm I only do rackmount stuff heh... I'm done with towers and desktop cases heh |
| 14:05.44 | johnm | swm_: well im after looking for something we can offer based on the same hardware for both rack and standalone. The standalone needs to be small, sturdy and quiet. |
| 14:05.57 | johnm | swm_: anyways, you sure that motherboard model no is right? |
| 14:06.02 | johnm | swm_: can't seem to find it |
| 14:06.10 | coppice | why doesn't someone make 1U cases at a reasonable price? then we could all be rack mount users |
| 14:06.49 | swm_ | It's hard to find by now, it was discontinued last year, but it supports up to 3.0 Ghz XEON Processors x 2 .. with a 2U case, and 2.8 Ghz x 2 with a 1 U case. |
| 14:06.57 | lathos42 | coppice: Because then who would they sell their Tower and desktop cases to? :) |
| 14:06.57 | johnm | coppice: well you can get cheap 1U rackmounts for EPIA boards. even ones which take 2xEPIA micro-itx boards. they're only about Ā£150 |
| 14:07.08 | johnm | swm_: any idea what family/model took over? |
| 14:07.16 | coppice | 150 pounds is bloody expensive |
| 14:07.41 | johnm | coppice: not for a 19" rackmount case, 1U which holds Micro-ITX formfactor boards |
| 14:08.01 | coppice | exactly. a 1U case is overpriced |
| 14:08.17 | Dr_Ray | coppice - it's not based on what they cost, it's based on what people will pay |
| 14:08.19 | swm_ | I am not sure, go to Intel.com's website and check it out, I look on ebay for all my parts and get the used surplus equipment. It's rather nice. I have a pile of boards and rackmount cases, just haven't had the time to play with them |
| 14:08.20 | coppice | all ITX cases are overpriced, though |
| 14:08.39 | coppice | Dr_Ray: not its not. I won't pay that much :-) |
| 14:08.47 | Dr_Ray | you is not people |
| 14:08.48 | johnm | coppice: not at all. they're all about Ā£30-40 |
| 14:08.57 | johnm | coppice: I suppose it depends on what you call expensive really eh? |
| 14:09.11 | coppice | Dr_Ray: seriously, there are lot of makers. competition should bring them down |
| 14:09.26 | swm_ | se7500wv2 server board going for 16.92 right now on ebay in 2 hours |
| 14:09.38 | lathos42 | You're paying extra for convenience |
| 14:09.45 | coppice | 40 pounds for a very simple metal fabrication and a $5 power supply is a swindle |
| 14:09.47 | Dr_Ray | coppice - you are paying for space savings.. |
| 14:09.56 | Dr_Ray | royal you |
| 14:10.21 | coppice | hey, the royals don't have to pay for anything :-) |
| 14:10.35 | Dr_Ray | I wonder how much google saves using beige boxes as opposed |
| 14:10.38 | Dr_Ray | to 1u |
| 14:11.16 | coppice | If you use the book style PCs you can get reasonable density in a rack |
| 14:11.46 | FABRIZIOxxx | another question ... if i have 28 sip phones configured with gsm and ilbc codec and say that 8 of these are calling out on my tdms .. will a 100mbit nic be enough ..? |
| 14:12.03 | Dr_Ray | Fabri - hell yes |
| 14:12.20 | FABRIZIOxxx | ok .. so .. should i install 2 or 3 nics ..? |
| 14:12.22 | coppice | Google should be able to use 1Us cheaply. They buy enough to have a proper talk with the suppliers :-) |
| 14:12.25 | tzanger | FABRIZIOxxx: sorry I got into a discussion here int he office |
| 14:12.28 | tzanger | your interrupts look fine |
| 14:12.36 | tzanger | I notice you're running a dualcpu system... what kernel/distro? |
| 14:12.55 | *** join/#asterisk mkrufky (n=mk@68.160.103.77) |
| 14:12.56 | tzanger | 1U is expensive |
| 14:13.03 | FABRIZIOxxx | tzanger, slackware 10.2 with 2.6.13.2 kernel |
| 14:13.06 | tzanger | but it ocmes down to ... are you space or cost constrained? |
| 14:13.14 | tzanger | FABRIZIOxxx: good man. :-) |
| 14:13.15 | Dr_Ray | what rev card do you have? |
| 14:13.22 | coppice | tzanger: only if you don't buy enough of them :-) |
| 14:13.29 | spackle | tzanger, depends on how much a square foot costs in your space. |
| 14:13.37 | Dr_Ray | I could see how 1u racks would be easier to cool |
| 14:13.45 | Dr_Ray | as opposed to cooling a whole room |
| 14:13.52 | FABRIZIOxxx | tzanger, ok .. if interrupts are ok then the problem must be my lan .. |
| 14:14.01 | tzanger | not necessarily FABRIZIOxxx |
| 14:14.28 | Dr_Ray | what does zttool report back? |
| 14:14.34 | tzanger | rmmod wctdm zaptel and then dmesg -c and then modprobe wctdm and dmesg again. take the output from the last dmesg and pastebin it |
| 14:14.42 | tzanger | Dr_Ray: we were already there... it's consistent |
| 14:14.59 | FABRIZIOxxx | tzanger, ok .. just a momen t |
| 14:15.07 | Dr_Ray | oh, it's the same guy, sorry :) |
| 14:15.18 | swm_ | <PROTECTED> |
| 14:15.50 | swm_ | oh yeah and some registered memory, two that is the same model heh |
| 14:16.13 | coppice | Rapid Rail? What is it? MagLev? |
| 14:16.21 | swm_ | i'm off to grand jury duty |
| 14:16.25 | tzanger | coppice: what's g.168 compliance get an echo can? |
| 14:16.27 | FABRIZIOxxx | tzanger, http://pastebin.ca/24302 |
| 14:16.35 | FABRIZIOxxx | this is the last dmesg |
| 14:16.38 | spackle | swm_ where do you get that box? |
| 14:16.38 | lathos42 | coppice: It better be for that price |
| 14:16.53 | mutilator | off the wall question but... |
| 14:16.54 | mutilator | anyone know where i might find a list of counties in a state namely michigan.., with all towns in that county? |
| 14:17.05 | coppice | The ITU spec for line echo cans is G.168. KB1 might get through about 2 of the tests right now |
| 14:17.19 | spackle | mutilator, state website |
| 14:17.31 | mutilator | yea i've scoured it for a few hrs now |
| 14:17.36 | tzanger | FABRIZIOxxx: ok you're in italy but the FXO modules are in FCC (North America) mode |
| 14:17.37 | mutilator | i can't find anything like that |
| 14:17.44 | tzanger | FABRIZIOxxx: you didn't dmesg -c either :-) |
| 14:18.20 | FABRIZIOxxx | ok .. sorry to disturb but what do i have to do to chaNGE fcc ..? can i do it in zaptel.conf? |
| 14:18.34 | FABRIZIOxxx | yes .. i cannot unload since i have all my users talking+ |
| 14:18.41 | tzanger | FABRIZIOxxx: you want TBR21 mode |
| 14:18.57 | tzanger | or ITALY mode I suppose |
| 14:19.16 | tzanger | rmmod wctdm zaptel; dmesg -c; modprobe wctdm opermode=ITALY ; dmesg |
| 14:19.19 | tzanger | paste the new dmesg output |
| 14:19.42 | FABRIZIOxxx | ok .. i'll try |
| 14:20.22 | tzanger | FABRIZIOxxx: you need to unload/reload to change this |
| 14:20.29 | tzanger | if it's crackly/sputtery I don't htink they'll mind :-) |
| 14:20.43 | FABRIZIOxxx | ok .. just did it .. lets see if it works ..! |
| 14:21.01 | FABRIZIOxxx | now its showing ITALY mode in dmesg |
| 14:21.06 | tzanger | pastebin it please |
| 14:21.07 | *** join/#asterisk anthm (n=anthmct@CPE-69-76-83-52.wi.res.rr.com) |
| 14:21.07 | *** mode/#asterisk [+o anthm] by ChanServ |
| 14:21.10 | FABRIZIOxxx | ok |
| 14:21.13 | FABRIZIOxxx | just a sec |
| 14:21.16 | tzanger | so you have two TDM04B cards then? |
| 14:21.24 | tzanger | what version of zaptel/asterisk? |
| 14:22.03 | FABRIZIOxxx | tzanger, yes .. asterisk 1,0,9/zaptel 1,2,0 beta |
| 14:22.08 | tzanger | hmm |
| 14:22.26 | tzanger | I'd recommend CVS HEAD of zaptel myself, but let's see if this fixes your issue |
| 14:22.38 | tzanger | FABRIZIOxxx: please pastebin your new dmesg output |
| 14:23.07 | FABRIZIOxxx | ok .. just a minute |
| 14:23.18 | FABRIZIOxxx | http://pastebin.ca/24303 |
| 14:23.24 | FABRIZIOxxx | it sill in FCC ... |
| 14:23.36 | Katty | hmm. |
| 14:23.45 | tzanger | FABRIZIOxxx: type dmesg -c (don't forget the -c) |
| 14:23.52 | tzanger | that clears the dmesg output |
| 14:24.04 | *** join/#asterisk wunderkin (i=kev@12-219-162-233.client.mchsi.com) |
| 14:24.12 | FABRIZIOxxx | ok .. let me do it again |
| 14:24.16 | tzanger | so next time you do the dmesg (after you modprobe wctdm opermode=ITALY) you get only the new output |
| 14:24.25 | coppice | tzanger: I thought everyone knew what G.168 was |
| 14:24.39 | tzanger | coppice: no, I know it's echo canceller specs but I have no idea what the tests actually show |
| 14:24.58 | tzanger | I'd be very interested in seeing what was in volved in getting KB1 g168 compliant, and really understanding what g168 compliance gets you |
| 14:25.31 | johnm | coppice: Any chance you know which RFC governs G168? |
| 14:25.45 | tzanger | I thought RFCs were only an internet standard base |
| 14:25.48 | tzanger | not a telecom one |
| 14:25.49 | FABRIZIOxxx | tzanger, http://pastebin.ca/24304 .. this time with dmesg -c |
| 14:25.57 | johnm | s/RFC/ETSI/ or whatever |
| 14:26.02 | coppice | G.168 is an ITU spec |
| 14:26.03 | tzanger | MUCH better |
| 14:26.07 | tzanger | but it's still in FCC mode |
| 14:26.07 | tzanger | wtf |
| 14:26.22 | *** join/#asterisk Sedorox (n=Brandon@smartserv/cna/Sedorox) |
| 14:26.22 | johnm | coppice: and ITU have these specs somewhere? google is being crap |
| 14:26.23 | spackle | johnm - so did you find a machine? |
| 14:26.38 | tzanger | does 1.2.x not support opermode for wctdm? |
| 14:26.45 | johnm | spackle: Still looking, we have plenty of options but nothing which is fairly generic, meaty, and well priced. |
| 14:26.46 | coppice | how about the ITU web site :-) |
| 14:26.58 | tzanger | FABRIZIOxxx: I would like to suggest using CVS HEAD for zaptel but I'm not sure if that'll get you anywhere |
| 14:27.02 | spackle | johnm - what about supermicro? |
| 14:27.15 | FABRIZIOxxx | tzanger, ok .. i'll give it a test tonight.. |
| 14:27.27 | tzanger | you can try TBR21 as well |
| 14:27.41 | tzanger | rmmod wctdm zaptel ; dmesg -c ; modprobe wctdm opermode=TBR21 ; dmesg |
| 14:27.58 | tzanger | but it doesn't seem to be accepting ITALY so I'm not sure if it would accept TBR21 either |
| 14:28.05 | Katty | hmm. |
| 14:28.09 | coppice | tzanger: you need to deal with quite a few things (real world important things) to pass a goodly number of the G.168 tests. I came up with solutions for some of them a couple of years ago, they diverted my attention to other things |
| 14:28.16 | FABRIZIOxxx | tzanger, ok .. i'll test it .. |
| 14:28.25 | Katty | this is just weird. no one had said good morning to me. |
| 14:28.25 | johnm | spackle: They still come in a bit steep. Ideally what I want is a dual board, 2 onboard NIC's, 2 PCI, fits suitably in both 19" 1U rack + small encasements, and the whole bundle needs to come in around Ā£300 basic. |
| 14:28.48 | johnm | spackle: thats 300 without the rackmount, but with all the kit (single proc) |
| 14:28.53 | Beirdo | Good morning, Katty |
| 14:28.55 | tzanger | US$600 for dual board, dual NIC? riiiiiiiiiiight |
| 14:28.56 | Beirdo | just got here. |
| 14:28.58 | Katty | Beirdo: :> |
| 14:29.03 | tzanger | morning Beirdo |
| 14:29.11 | Beirdo | morning, tzanger :) |
| 14:29.14 | Katty | Beirdo: good moorning |
| 14:29.18 | johnm | tzanger: I've found plenty, but none of them support 2 PCI, and no room for a riser. |
| 14:29.26 | tzanger | wow really |
| 14:29.34 | johnm | tzanger: thats with dual xeons, and 1gb ECC DDR3200 |
| 14:29.37 | spackle | johnm: check out ironsystems. They have an 'A' class theat has tyan mobos, might be close to what you are looking for. |
| 14:29.39 | Beirdo | we don't want people feeling ignored :) |
| 14:29.42 | *** join/#asterisk BeHappy_ (n=willy@host28-80.pool8251.interbusiness.it) |
| 14:29.46 | johnm | spackle: interesting. |
| 14:29.50 | BeHappy_ | ih |
| 14:29.54 | BeHappy_ | hi |
| 14:31.13 | *** join/#asterisk znoG (n=gs@200.115.218.81) |
| 14:31.30 | spackle | Beirdo, I'll bite, what are you being interviewed about? |
| 14:31.37 | Beirdo | hehe |
| 14:31.48 | Beirdo | fulltime position here instead of contract |
| 14:31.59 | Beirdo | (stable cash flow)++ |
| 14:32.08 | *** join/#asterisk littleball (n=littleba@cm157.epsilon173.maxonline.com.sg) |
| 14:32.11 | spackle | so not your political views or a trailer of your new movie? |
| 14:32.13 | Beirdo | we'll see how it goes |
| 14:32.15 | Beirdo | nah |
| 14:32.30 | Beirdo | my political views would make people's heads spin |
| 14:32.30 | coppice | what's so stable about fulltime these days? |
| 14:32.30 | Beirdo | heh |
| 14:32.42 | Beirdo | coppice: regular pay periods |
| 14:32.46 | spackle | what's so fulltime about fulltime these days? |
| 14:32.48 | Beirdo | until you get laid off, of course |
| 14:33.03 | Beirdo | or until I move to Puerto Rico |
| 14:33.04 | Beirdo | hehe |
| 14:33.09 | coppice | exactly. contractors go last :-) |
| 14:33.23 | Beirdo | and we get screwed up cash flow |
| 14:33.50 | johnm | spackle: looking a little better (general support wise) than most of the others I've seen, but still limited to 1PCI 5v for the ones in the right price. |
| 14:34.15 | johnm | spackle: Hell, I can actually get a 19" rackmlunt case for an EPIA board, which is almost ideal for many, except that I need a powerful, redundant option also. |
| 14:34.21 | spackle | johnm: I've had good luck, sorry it didn't meet your needs. |
| 14:34.34 | johnm | spackle: even the epia boards support 2pci via riser :\ |
| 14:34.41 | johnm | spackle: np, I'll keep looking |
| 14:34.49 | johnm | spackle: I think it's going to be as simple as... I need 2 solutions |
| 14:34.52 | BeHappy_ | can i ask for some help with zaphfc? |
| 14:34.55 | Hmmhesays | wow that just made my morning |
| 14:34.57 | *** join/#asterisk da_monumental_1 (n=da_monum@rrcs-24-172-102-198.midsouth.biz.rr.com) |
| 14:35.10 | Beirdo | Hmmhesays: Hmmm? |
| 14:35.25 | Katty | Hmmhesays: mew. |
| 14:35.28 | spackle | johnm: Did you say dual processor too? |
| 14:35.44 | Hmmhesays | john mayer covering "area codes" by ludacris |
| 14:36.52 | johnm | spackle: Not on the EPIA boards. Im looking at low-end and high-end kit. The lower end is EPIA based, but the higher-end would be dual proc. What I was looking for was a fairly cheap dual proc solution, without the cruft to bring the price down. Something I can easily run under-capacity for low end, and still hit the same kind of budget |
| 14:36.57 | *** join/#asterisk file (n=jcolp@mctnnbsa31w-142166115000.nb.aliant.net) |
| 14:37.04 | johnm | spackle: it's pretty achievable, until you throw in phyiscal limitations of 1U servers, and the offerings of most people. |
| 14:37.19 | johnm | spackle: even 2U would do, at a push. |
| 14:37.21 | Katty | Hmmhesays: :< |
| 14:37.34 | Hmmhesays | it was hailarious |
| 14:37.44 | file | Katty! Hmmhesays! |
| 14:37.48 | coppice | 2U doubles your co-lo costs |
| 14:37.52 | tzanger | yup |
| 14:37.54 | Katty | file: :> |
| 14:37.59 | tzanger | unless you already have a rack/half rack |
| 14:38.01 | johnm | coppice: who cares if you're not co-lo :) |
| 14:38.17 | coppice | then who cares about 1U? |
| 14:38.20 | Hmmhesays | hey file |
| 14:38.31 | johnm | spackle: it's annoying that most offerings are 1 full, 1 half height for 1U |
| 14:38.34 | spackle | johnm: I really like the epia mini-itx rackmounts that are like 14" deep. Very appliance like. too bad they don't have better network components. |
| 14:38.40 | johnm | coppice: because it's 19" and fits in a rack? |
| 14:38.46 | johnm | coppice: you dont have to co-lo a rackmount. |
| 14:38.49 | jaiger | hey all |
| 14:39.07 | jaiger | has anyone used Mediatrix sip gateways? |
| 14:39.22 | jarrod | ive never heard of them |
| 14:39.23 | Katty | file: wuh? |
| 14:39.24 | spackle | jaiger - run fast unless you like SNMP |
| 14:39.31 | *** join/#asterisk royth1 (n=royth1@200.121.129.178) |
| 14:39.31 | coppice | actually, you can rarely truly rack mount in a co-lo. the slides never seem to fit :-) |
| 14:39.45 | file | Katty: hi |
| 14:39.57 | johnm | jarrod: yeah. they're pretty awesome |
| 14:39.57 | Katty | file: hi asl. |
| 14:40.25 | file | Katty: 18/M/Canada OMG!!! |
| 14:40.34 | *** join/#asterisk yogurt2ungue (n=yogurt2u@44-170-114-200.fibertel.com.ar) |
| 14:40.37 | Katty | file: zomghottttlolz |
| 14:40.59 | Moc | 23/M/Quebec ;) |
| 14:41.28 | Katty | you're old, Moc |
| 14:41.30 | Katty | OLD |
| 14:41.32 | file | and scary |
| 14:41.36 | twisted | 99/?/earth |
| 14:41.36 | Katty | and tall |
| 14:41.41 | Katty | twisted: pfft. |
| 14:41.42 | file | Moc is all tall like and like a giant |
| 14:41.48 | file | like omg like so cool |
| 14:41.49 | Katty | file: i know. |
| 14:42.04 | Moc | urm... ok hehe |
| 14:42.04 | Katty | twisted: it's 9:40 |
| 14:42.13 | twisted | Katty, *nods* |
| 14:42.14 | Katty | twisted: you should have been up /hours/ ago |
| 14:42.20 | file | it's 11:42AM here |
| 14:42.32 | Katty | file: get your head out of the future. |
| 14:42.33 | twisted | Katty, nah |
| 14:42.45 | file | Katty: I like it here |
| 14:42.52 | Katty | file: k'then |
| 14:43.11 | Katty | twisted: do you have teh weekend off? |
| 14:43.35 | twisted | Katty, nope |
| 14:43.41 | zoa | jaiger: i did they suck bigtime |
| 14:43.52 | zoa | or at least they used to suck back then |
| 14:43.56 | zoa | hey katty |
| 14:43.58 | zoa | and file |
| 14:43.59 | zoa | file |
| 14:44.01 | zoa | coming to asscon? |
| 14:44.10 | file | no |
| 14:44.11 | MikeJ[Laptop] | ummmm |
| 14:44.12 | Katty | twisted: goshdangitanyhow. |
| 14:44.24 | twisted | Katty, :P i'll explain later |
| 14:44.27 | MikeJ[Laptop] | I don't think it's called asscon |
| 14:44.29 | Katty | twisted: k |
| 14:44.34 | file | unfortunately I'm not going, cause I'm not made of money :P |
| 14:44.44 | twisted | for now, I must drink mah redbull to wake up, get a shower, and get to work |
| 14:44.45 | Katty | file: but do you grow on trees? |
| 14:44.57 | Katty | twisted: i don't think redbull is vegan |
| 14:45.04 | file | Katty: nope, don't think so |
| 14:45.20 | file | spackle: there's a distinct possibility |
| 14:45.26 | Katty | it's has taurine |
| 14:45.26 | Corydon-w | file's made of the meat that you don't eat... |
| 14:45.56 | Beirdo | tripe? |
| 14:46.12 | zoa | haha |
| 14:46.17 | zoa | they eat tripe in bulgaria |
| 14:46.19 | zoa | tripe soup |
| 14:46.21 | zoa | BRRRRR |
| 14:46.25 | Beirdo | heh |
| 14:46.27 | twisted | Katty, taurine is man made nowadays |
| 14:46.31 | Corydon-w | but if you suck on that meat long enough, you might get cream... |
| 14:46.34 | Katty | twisted: hey, just think, you're drinking ox bile (= |
| 14:46.35 | Beirdo | some people like strange things, I guess |
| 14:46.40 | Katty | twisted: no it's not |
| 14:46.41 | coppice | they eat tripe in lots of places |
| 14:46.56 | Beirdo | yeah, but *I* don't usually eat it :) |
| 14:47.03 | pauldy | hmm save a tree |
| 14:47.05 | Katty | twisted: taurine is found in the brain, intestines, and muscles |
| 14:47.06 | pauldy | eat a vegan |
| 14:47.32 | *** join/#asterisk mhnoyes (n=mhnoyes@user-2ivfj1r.dialup.mindspring.com) |
| 14:47.39 | coppice | Beirdo: I bet you are they kind of narrow minded person who wouldn't eat a cat |
| 14:47.45 | Beirdo | heh |
| 14:47.49 | Beirdo | not willingly |
| 14:47.59 | coppice | Beirdo: how about a pussy? |
| 14:48.00 | Katty | twisted: also, cats must have taurine |
| 14:48.07 | Katty | twisted: it is an esscential part of their kitty diet. |
| 14:48.10 | twisted | Katty, wikipedia? |
| 14:48.13 | Beirdo | coppice: that's a bit different |
| 14:48.33 | Beirdo | and we have ladies present, behave :) |
| 14:48.46 | Katty | twisted: http://en.wikipedia.org/wiki/Taurine |
| 14:48.55 | coppice | see. being palatable is just a matter of how you package things :-) |
| 14:48.56 | twisted | Katty, yah |
| 14:49.05 | Katty | Beirdo: ladies? |
| 14:49.13 | Beirdo | OK, at least ONE lady :) |
| 14:49.18 | Katty | Beirdo: who said i was a lady? :P |
| 14:49.21 | Beirdo | heh |
| 14:49.30 | Katty | i swing mostly les. anyawy |
| 14:49.31 | coppice | Beirdo: Its OK. Ladies know about these things :-) |
| 14:49.46 | Beirdo | let me give you the benefit of the doubt, it's better to assume that you are a lady than not. |
| 14:50.03 | *** join/#asterisk Jameno123 (n=james@ddsl-216-68-219-38.fuse.net) |
| 14:50.09 | Katty | Beirdo: excellent stance (((= |
| 14:50.23 | Beirdo | :) |
| 14:50.28 | Katty | twisted: mmm, bile! |
| 14:50.30 | Jameno123 | [10:43] <lehemann> **** I transfered to you and I cannot take a call while you are on the phone |
| 14:50.37 | pauldy | Beirdo, you mean you haven't learned to assume most females on irc are probably over weight middle aged bald guys sitting at home nakid touching themselves while trying to get people to talk to them on irc |
| 14:50.37 | *** join/#asterisk klasstek (n=nunyobiz@sta-206-168-218-202.rockynet.com) |
| 14:50.49 | Jameno123 | Any idea why with the cisco 7940/7960 if you hit 'transfer'. |
| 14:51.04 | Delvar | pauldy: damit you found me out! |
| 14:51.04 | Jameno123 | Call queue will not ring a phone, until the call is hung up at the transfered extension. |
| 14:51.05 | Beirdo | pauldy: I think Katty's proved that's not the case, having met people in the channel in person :) |
| 14:51.43 | tzanger | hjmm maybe I should start eating cat food |
| 14:51.45 | Jameno123 | call comes in queue, rep transfers it to another extension, all queue will absolutely not ring that phone again, until the preson you transfered the call too hangs up!.. |
| 14:51.55 | tzanger | no energy :-) |
| 14:52.06 | Beirdo | yeah, Katty's not a balding FBI agent trolling for pervs |
| 14:52.07 | Katty | tzanger: cats nap all day. |
| 14:52.15 | Katty | Beirdo: heh. |
| 14:52.39 | Katty | Beirdo: i've got a ways to go before i start balding ;) |
| 14:52.48 | Beirdo | heh, let's hope so :) |
| 14:53.03 | coppice | maybe Katty is a balding pervert trolling for an FBI agent |
| 14:53.08 | Beirdo | that would be rather unfortunate otherwise |
| 14:54.02 | johnm | spackle: looks like the xSeries servers do alright here. the 306 is cheap, and well capable. |
| 14:54.24 | Katty | coppice: i'm hardly balding. |
| 14:54.42 | Katty | coppice: though, if you're not careful, i might shed on you. |
| 14:54.48 | *** join/#asterisk usm (n=usm@218.111.64.37) |
| 14:55.32 | johnm | spackle: the *only* downside is a single onboard NIC, but that isn't going to be a problem because I can just do 801.Q trunking and QoS |
| 14:56.13 | Hmmhesays | i can't believe its friday |
| 14:56.14 | Hmmhesays | argh |
| 14:56.15 | spackle | johnm: is that an IBM xSeries? |
| 14:56.17 | Hmmhesays | to much shit to do |
| 14:56.46 | Katty | Hmmhesays: if you detach from irc, i bet you'd get more done ;) |
| 14:57.34 | coppice | Hmmhesays: stomach problems? :-) |
| 14:57.39 | Hmmhesays | naw i'd just find another distraction |
| 14:58.05 | Hmmhesays | coppice not really |
| 14:58.47 | shido6 | http://laptop.media.mit.edu/laptop-images.html |
| 14:59.06 | Hmmhesays | hey can someone do me a favor and search a song a www.chordie.com i wanna know if that popup i just got was from them |
| 15:01.12 | johnm | spackle: yeah |
| 15:01.57 | gordonjcp | Hmmhesays: chordie.com didn't produce a popup in either firefox or ie6 |
| 15:02.28 | johnm | spackle: http://www.ibm.com/common/ssi/fcgi-bin/ssialias?infotype=pm&subtype=sp&pdf=yes&appname=STG_XS_GBEN&htmlfid=XSD00311GBEN |
| 15:02.42 | Hmmhesays | gordonjcp did you search for a song? |
| 15:02.48 | gordonjcp | ah, no |
| 15:02.51 | gordonjcp | 2 secs |
| 15:03.16 | johnm | spackle: 2xPCI-X, which downgrades just fine for the Digium WIldcards. |
| 15:04.00 | gordonjcp | Hmmhesays: nope |
| 15:04.08 | Hmmhesays | thanks gordonjcp |
| 15:04.30 | Hmmhesays | all the pr0n i surf for has finally caught up with me i guess |
| 15:04.38 | coppice | johnm: as long as you get the 3.3V ones |
| 15:04.57 | lathos42 | johnm: Have you looked into Dell? |
| 15:05.14 | coppice | Ah, the dark side |
| 15:05.22 | johnm | coppice: exactly. Which should be fine anyways. We've been running with the 5v ones recently but thats hardly a bi change |
| 15:05.38 | johnm | lathos42: yeah, dell are cheap for a reason. But actually dell dont offer what we need in a 1U |
| 15:05.55 | lathos42 | johnm: Really, not even the Poweredge 1850? |
| 15:05.55 | coppice | dell 1Us aren't cheap |
| 15:06.34 | Hmmhesays | yeah get a tower, flip it on its side, drill some holes... voila! rackmount |
| 15:07.11 | johnm | lathos42: the 1850 first of all conflictsa with the digium wildcards, but no. not really. |
| 15:07.19 | coppice | HP used to make rackmounts which were a tower in a frame, so they took 2/3rds of a rack |
| 15:07.28 | johnm | coppice: they still do |
| 15:07.35 | lathos42 | Hmmhesays: That's what we did for our non-rackmount servers when we got our rack.. except we just flipped them on their sides and put them on a rack shelf |
| 15:07.53 | coppice | johnm: who buys something that stupid? |
| 15:08.09 | *** join/#asterisk littleball (n=littleba@cm157.epsilon173.maxonline.com.sg) |
| 15:08.19 | johnm | coppice: people who need high-density storage |
| 15:08.42 | johnm | coppice: they're the kit which normally offer about 8 channels for SCSI or some such |
| 15:08.46 | Hmmhesays | lathos42, that works. I just like drilling holes in things |
| 15:08.52 | *** join/#asterisk Blazint (n=blazin@cm225.epsilon203.maxonline.com.sg) |
| 15:08.55 | coppice | huh? how is a tall thin server, with huge amounts of open space around it dense? |
| 15:09.27 | lathos42 | I see that Digium updated their Hardware compatibility page |
| 15:10.45 | littleball | hi, i just create my own voip services (www.mobmeee.com). Who can recommend some more useful services for me? It is not launched yet. :) |
| 15:12.08 | samueltc | what kind of sms-related services are you offering? |
| 15:12.47 | littleball | samueltc, send from mobile by GPRS pls see www.roamingsms.com (my old website) or websms |
| 15:12.57 | samueltc | ok |
| 15:13.17 | lathos42 | johnm: I had forgotten that the 1850 has an issue with the Wildcards.. I'm looking at the 2850 for our * server |
| 15:13.24 | *** join/#asterisk TheCops (n=bobby@206-248-136-187.dsl.teksavvy.com) |
| 15:13.27 | TheCops | Hi |
| 15:13.36 | Katty | hi. |
| 15:13.49 | littleball | samueltc, i am new in VoIP domain, i try to understand what kind of services are useful |
| 15:14.01 | *** join/#asterisk f0urtyfive (n=noone@pcp0010984341pcs.ivylnd01.pa.comcast.net) |
| 15:14.19 | T0aD | why asterisk could send messages such as 488 Not acceptable to my Yate client ? |
| 15:14.24 | T0aD | codecs issue ? |
| 15:14.34 | TheCops | X-Rob, there ? |
| 15:15.09 | *** join/#asterisk oej (n=Olle@apollo.webway.se) |
| 15:16.41 | *** join/#asterisk zeckill (n=zec@221.124.100.34) |
| 15:16.55 | zeckill | hi all... I have a question about CDR billsec |
| 15:17.07 | zeckill | anyone please help... the problem is ... I would like to count the actual billing seconds to a call ... where the call is originated from a SIP trunk and connected to another Asterisk server by IAX... how do I get the actual billing duration for the IAX called between call pick up and hang up |
| 15:17.15 | *** join/#asterisk pa (n=Paolo@unaffiliated/pa) |
| 15:17.21 | zeckill | right now the CDR billsec data is giving me the duration of the whole call after the SIP call is picked up within my Asterisk box |
| 15:17.31 | *** join/#asterisk rking (n=rking@ip68-105-231-56.lu.dl.cox.net) |
| 15:17.36 | zeckill | any idea please |
| 15:18.13 | TheCops | someone is using allpage.agi script from X-Rob ? |
| 15:18.24 | *** join/#asterisk odie_flocon (n=Odie@ptr-64-201-182-211.ptr.terago.ca) |
| 15:19.32 | *** join/#asterisk }cytrak{ (n=kvirc@208.63.19.172) |
| 15:19.43 | *** join/#asterisk MrMAGO (n=mglucksm@200.109.166.83) |
| 15:19.57 | zeckill | scenario: SIP > 1st Asterisk > IAX > 2nd Asterisk... how to get the actual call duration in the 1st Asterisk box for the IAX call plz? |
| 15:22.07 | *** join/#asterisk mbranca (n=matteo@81.208.92.210) |
| 15:22.11 | MrMAGO | hello, anyone knows how to use the Dial command like a Goto? I mean, Dial(SIP/${EXTEN}@local). Can I create a peer for localhost for example? Or is there a " |
| 15:22.23 | MrMAGO | "Local" channel? |
| 15:23.14 | fugitivo | yes |
| 15:23.18 | fugitivo | Local/extension |
| 15:23.32 | *** part/#asterisk ajpb (n=a@10.67.2.81.in-addr.arpa) |
| 15:23.34 | MrMAGO | I'm using LCDial and it only takes a Dial argument as it uses Dial to send calls to providers. I need to do some "trunking"... thanks! |
| 15:24.12 | *** join/#asterisk patrick^ (n=patrick_@24.215.0.34) |
| 15:24.22 | MrMAGO | I will try it and let you know fugitivo, thanks |
| 15:24.53 | *** join/#asterisk TrevorSHarrison (n=trevorsh@24.49.36.218) |
| 15:25.03 | zeckill | fugitivo: any idea about the CDR questions of mine please? |
| 15:25.22 | fugitivo | errr |
| 15:25.56 | fugitivo | billsec field? |
| 15:26.00 | fugitivo | i have to go |
| 15:26.00 | fugitivo | sorry |
| 15:26.12 | zeckill | yes... the 1st Asterisk box CDR's billsec record is counting the whole call starting from picking up the SIP trunk |
| 15:26.23 | zeckill | ok |
| 15:26.51 | fugitivo | find channel IAX2 |
| 15:26.55 | fugitivo | in your cdr |
| 15:27.24 | fugitivo | you'll see something like IAX2/peer@ip:port |
| 15:27.30 | fugitivo | channel field |
| 15:27.44 | zeckill | yes but the CDR entry's duration is counted from the SIP pick up |
| 15:27.57 | zeckill | which is not desired |
| 15:28.03 | *** join/#asterisk redder86 (n=lee@gateway.howardsilvan.com) |
| 15:28.32 | fugitivo | not really |
| 15:28.43 | fugitivo | you have 2 fields, duration and billsec |
| 15:28.51 | fugitivo | you have to take the billsec field |
| 15:29.00 | fugitivo | i really have to go, sorry |
| 15:29.03 | *** part/#asterisk g__ (n=goakham@itd01fw-fibre.itdepartment.com) |
| 15:29.08 | zeckill | k thanks anyways |
| 15:29.39 | zeckill | maybe I should ask how to get the billsec of a bridged call |
| 15:30.01 | *** join/#asterisk sozo (n=vidar@pppoecl73095.minlos.no) |
| 15:30.28 | jaiger | has anyone used Mediatrix sip gateways? |
| 15:31.25 | zeckill | also please anyone tried registering Asterisk to a Huawei SIP server? |
| 15:31.49 | sozo | Asterisk 1.0.9 + bristuff-0.2.0-RC8o in NT-mode: I can dial out from ISDN phone, but when trying to dial to it I get: Zap/1-1 is circuit-busy. Anyone here that know what is wrong? |
| 15:31.49 | odie_flocon | yes I have |
| 15:32.14 | odie_flocon | tried the Mediatrix Sip gateways |
| 15:32.57 | odie_flocon | Nice equipment. |
| 15:33.04 | odie_flocon | Hard to configure sometimes. |
| 15:34.38 | *** join/#asterisk ronaldl79 (n=chatzill@c-24-8-54-203.hsd1.co.comcast.net) |
| 15:34.48 | ronaldl79 | Hey guys.... |
| 15:35.21 | ronaldl79 | Quick question...for Music On Hold, does * expect the 'default' class to process? That seems to be the case after it not working until I defined 'default'. |
| 15:36.20 | zeckill | how to get the billsec after a Dial() plz? |
| 15:40.22 | *** join/#asterisk watchy (n=watchy@adsl-69-152-41-249.dsl.ltrkar.swbell.net) |
| 15:40.39 | redder86 | coppice: in developing +FCERROR (carrier mismatch detection) support... basically if the modem has been instructed AT+FRM=96 (receive V.29 9600 bps) the carrier it is looking for is 1700 Hz; and if it detects a carrier at 1080 Hz instead, then it means that the other end is transmitting V.21 300 bps? So then the modem could result with +FCERROR, or (if AT+FAR=1) respond +FRH:3 and then result with CONNECT (automatically switching to V.21 HDLC re |
| 15:42.00 | coppice | redder86: for now it is easier to start both modems. whichever starts receiving something meaningful, you just stop the other one |
| 15:42.38 | *** part/#asterisk Ariel_ (n=Ariel@adsl-068-157-125-248.sip.mia.bellsouth.net) |
| 15:42.53 | redder86 | coppice: the V.21 isn't too sensitive for that? |
| 15:43.07 | redder86 | coppice: or not now with preamble detection? |
| 15:43.20 | coppice | The V.21 won't see flags from a V.29 signal |
| 15:43.27 | redder86 | coppice: okay, good |
| 15:43.32 | *** join/#asterisk Seyr (n=Seyr@rrcs-24-227-133-226.sw.biz.rr.com) |
| 15:44.07 | T0aD | why asterisk could send messages such as 488 Not acceptable to my Yate client ? |
| 15:44.15 | redder86 | coppice: so could all of the modems be started and work independently like that? V.27ter, V.29, and V.21 ? |
| 15:44.18 | *** join/#asterisk roulduke (i=urvp03zh@p508D23B5.dip0.t-ipconnect.de) |
| 15:44.51 | coppice | The more you start the bigger the compute surge until they sort out the winner, but yes you could |
| 15:44.54 | Seyr | if your recording a file and hangup instead of pressing #, any way to have it continue through the menu? if (1,1) is Record and they hangup during recording (instead of pressing #) can I make it continue to (1,2) ? |
| 15:45.28 | *** join/#asterisk hadi57 (n=al_moghr@83.136.8.206) |
| 15:45.40 | redder86 | coppice: yeah, okay. Well, I don't see any real purpose in trying to detect other high-speed carriers. The issue is virtually always with V.21 being sent when we're expecting a high-speed carrier. |
| 15:45.49 | redder86 | coppice: I was just curious. |
| 15:46.14 | johnm | lathos42: I'd seriously consider the xSeries, they look pretty excellent for the price. |
| 15:46.32 | coppice | I've started them all for T.38 testing, but its a lousy solution for a production package |
| 15:47.16 | redder86 | coppice: the right solution is to build multi-carrier detection into each modem? |
| 15:47.45 | coppice | you can't really detect which modem it is until it has trained. |
| 15:47.52 | redder86 | oh |
| 15:48.29 | coppice | but the training fails in the first few hundred ms |
| 15:48.47 | redder86 | yeah |
| 15:49.40 | redder86 | I'm running the modems on a production system as of last night. They're only going to be sending and receiving a narrow set of faxes for the next week, but so far so good. |
| 15:50.12 | coppice | I assume it is restricted to not use V.17 |
| 15:50.20 | redder86 | V.17 sending enabled, V.29 receiving. |
| 15:50.39 | coppice | OK. So the sending really is solid. Good |
| 15:50.53 | redder86 | I've tried sending enough faxes with V.17 now that I'm confident that it will either work or it will fall-back to V.29 properly. |
| 15:51.08 | redder86 | it has a hard time with V.17 14400, but V.17 12000 is solid. |
| 15:51.34 | coppice | interesting. I wonder how well other modems do |
| 15:51.49 | redder86 | normally I don't have any problems with V.17 14400. |
| 15:52.13 | redder86 | normally if V.17 14400 fails then V.17 12000 and V.17 9600 will also fail and V.29 9600 will succeed. |
| 15:52.18 | *** join/#asterisk brookshire (n=matt@gateway.digium.com) |
| 15:52.20 | redder86 | with other modems. |
| 15:52.24 | coppice | is this on an E1 or analogue line? |
| 15:52.28 | redder86 | T1 |
| 15:52.48 | redder86 | the production system is a T1. Up until now my testing has been mostly on analogue. |
| 15:52.59 | coppice | if V.17 9600 fails and V.29 succeeds I think the other end lacks V.17 |
| 15:53.14 | coppice | but then it shouldn't even be trying V.17 |
| 15:53.18 | redder86 | yes, that has been my assumption... that it signalled V.17 although it's V.17 modem is broken |
| 15:53.33 | *** join/#asterisk outofjungle (n=outofjun@61.247.246.26) |
| 15:53.42 | coppice | V.17 9600 should be *much* better than V.29 9600 |
| 15:54.09 | redder86 | I've seen many a fax machine, in particular some Panasonics, that have very flaky V.17 modems. |
| 15:54.26 | *** part/#asterisk obsidian-studios (n=obsidian@c-66-177-188-197.hsd1.fl.comcast.net) |
| 15:54.51 | coppice | could be they don't really bother with it. V.17 sells machines, but people seldom look at the speeds they really get |
| 15:55.32 | redder86 | I've also noticed that Sharp fax machines, if they don't like your V.17 signal will send DCN. So if you call back and you use V.17 again you'll also get DCN. You have to call back with V.29 training. |
| 15:55.46 | coppice | My own V.17 rx receives very solidly from the tx |
| 15:55.54 | coppice | at 14,400 |
| 15:56.13 | coppice | how often is 14,400 working properly? |
| 15:56.44 | redder86 | hrmm... I'll have to try that again. I was having off-and-on results between sending and receiving V.17 14400 (both spandsp modems). |
| 15:56.59 | redder86 | I sent a dozen faxes on Tuesday with V.17 enabled, let me get those statistics for you... |
| 15:58.15 | *** join/#asterisk sterwill (n=sterwill@hansen.sourcegear.com) |
| 15:58.30 | *** join/#asterisk BoRiS (i=boris@S010600e07dcfc2f4.wp.shawcable.net) |
| 15:58.53 | *** join/#asterisk Gunnar (n=gunnar@34.80-203-209.nextgentel.com) |
| 15:59.10 | sterwill | I'm using CVS head from yesterday, and the Directory causes this error message when it tries to dial the extension that is making the call into the Directory: |
| 15:59.18 | sterwill | Sep 30 10:55:55 WARNING[21066]: channel.c:741 channel_find_locked: Avoided initial deadlock for '0x8137908', 10 retries! |
| 15:59.32 | sterwill | When it happens, I hear some weird tones and noise, then silence, on the phone making the call. |
| 16:00.02 | Jameno123 | can the queue app report just the hold time, and not the 'call position'? |
| 16:00.12 | sterwill | The extension is a macro to forward the caller to voice mail, which works normally. |
| 16:01.01 | *** join/#asterisk [ViRii] (n=virii@68-186-170-246.dhcp.smrt.tn.charter.com) |
| 16:01.51 | [ViRii] | when a user is in converstaion with another and a seperate call comes in it only beeps on one of the phones. how to change? |
| 16:02.52 | *** part/#asterisk Attila_Kovacs (n=kovacsat@dsl51B678A6.pool.t-online.hu) |
| 16:03.01 | redder86 | coppice: out of 12 faxes sent 5 of them succeeded with V.17 14400, the others all succeeded with V.17 12000. HP, Ricoh, Sharp, Panasonic, and Brother were the receivers. |
| 16:03.12 | *** join/#asterisk Attila_Kovacs (n=kovacsat@dsl51B678A6.pool.t-online.hu) |
| 16:03.35 | BoRiS | ViRiII: You'll have to use the & with your dial to specify more then one phone to ring. |
| 16:03.43 | coppice | so it looks like I have some work to do on the tx |
| 16:05.37 | redder86 | coppice: it is possible that there was a flow control problem at the time, and that could have influenced things. I won't know for sure if the fault there was the DSP's or if it was maybe the application's. I'll know better on this coming Wednesday. |
| 16:06.16 | coppice | well, its likely I will do anything to the modems by then. I will be in India all next week |
| 16:06.32 | redder86 | sounds fun, holidays? |
| 16:06.45 | Seyr | if your recording a file and hangup instead of pressing #, any way to have it continue through the menu? if (1,1) is Record and they hangup during recording (instead of pressing #) can I make it continue to (1,2) ? |
| 16:07.06 | coppice | redder86: hardly |
| 16:07.13 | redder86 | ah |
| 16:07.22 | *** part/#asterisk Attila_Kovacs (n=kovacsat@dsl51B678A6.pool.t-online.hu) |
| 16:07.23 | redder86 | well you'll be missed |
| 16:08.21 | [ViRii] | k tx |
| 16:11.55 | jhiver | good evening everybody |
| 16:12.09 | brookshire | hi! |
| 16:13.05 | coppice | ho! |
| 16:13.18 | brookshire | who? |
| 16:13.34 | MikeJ[Laptop] | no |
| 16:16.00 | drumkilla | brookshire: !!!!!!!! |
| 16:16.10 | *** part/#asterisk spackle (n=spackle@209.234.83.19) |
| 16:17.16 | brookshire | omg hi! |
| 16:17.31 | *** join/#asterisk Sedorox (n=Brandon@smartserv/cna/Sedorox) |
| 16:18.17 | *** join/#asterisk brad_mssw (n=brad@shop.monetra.com) |
| 16:20.38 | rayvd | wtf11!11 :P |
| 16:22.50 | sigterm | morning people |
| 16:24.19 | *** part/#asterisk redder86 (n=lee@gateway.howardsilvan.com) |
| 16:24.48 | T0aD | can we enable g729 codec on asterisk ? |
| 16:25.15 | MikeJ[Laptop] | T0aD, you need to purchase licenses for it |
| 16:25.22 | T0aD | G.729 (through purchase of commercial license through Digium |
| 16:25.24 | T0aD | ok |
| 16:25.28 | MikeJ[Laptop] | to be legal in most places |
| 16:25.45 | T0aD | i have some remote comrade who is trying to configure his codecs |
| 16:25.53 | T0aD | he has mp3 enabled he told me ??! |
| 16:25.58 | *** join/#asterisk casio_ (i=jjhhjkh@200-126-69-192.bk5-dsl.surnet.cl) |
| 16:26.05 | ronaldl79 | Has anyone experienced Music on Hold pausing music...and continuing from where it finished??? |
| 16:26.13 | T0aD | MikeJ[Laptop], with Yate I have no such licence issues |
| 16:26.20 | casio_ | <PROTECTED> |
| 16:26.21 | mmlj4 | ronaldl79: pauses for how long? |
| 16:26.57 | ronaldl79 | mmlj4 -- When I place someone on hold, they hear the music....when I come back, * pauses...then continues from where it left off when I place someone on hold again. Just noticed this behavior today. |
| 16:27.03 | MikeJ[Laptop] | T0aD, yate is distributed from an area without software patents, so they may just not care |
| 16:27.11 | ronaldl79 | I am using native playback, and not mpg123 @ mmlj4 |
| 16:27.22 | mmlj4 | oh, hmm... dunno |
| 16:27.34 | ronaldl79 | mmlj4 -- Are you using mpg123? |
| 16:27.37 | tzafrir_laptop | MikeJ[Laptop], not exactly correct: yate is also distributed with Debian from the US. |
| 16:27.38 | MikeJ[Laptop] | there are certainly g729 codecs around that are not binary only, but they would be illegal to use in the US at least |
| 16:27.54 | ronaldl79 | I think I'm gonna reproduce with mpg123, and see if the results are the same. |
| 16:27.57 | mmlj4 | no, i don't have music on hold |
| 16:28.11 | tzafrir_laptop | OTOH, someone asked today about g729 and was answred that the patent is valid there |
| 16:28.12 | MikeJ[Laptop] | tzafrir, do they know they are distributing patented stuff w/o permission? |
| 16:28.49 | tzafrir_laptop | MikeJ[Laptop], I was going to ask T0aD for clarifications |
| 16:28.55 | casio_ | i need make an app that make a Digium FXO x100p callme with an event... where i can find info about howto make this?, u know a good tutorial? |
| 16:29.01 | coppice | I wonder if Kevin Walsh is a moron in real life, of if its just a part he plays on the mailing list? :-) |
| 16:29.20 | tzafrir_laptop | casio_, at what event? |
| 16:29.34 | casio_ | example a cron job |
| 16:29.45 | T0aD | MikeJ[Laptop], i love romania :) |
| 16:29.57 | tzafrir_laptop | casio_, drop a call file in Asterisk's outgoing spool |
| 16:30.16 | mutilator | coppice: chances are he has no real life.. |
| 16:30.21 | T0aD | do you know how SIP authentication is working ? |
| 16:30.27 | coppice | MikeJ: the same would be true almost anywhere if you use them for a commercial purpose |
| 16:30.29 | T0aD | what I have to send the server to authenticate ? |
| 16:30.36 | casio_ | mmm sound fine, tzafrir_laptop where i can read about? |
| 16:30.49 | tzafrir_laptop | ~voip-info |
| 16:30.52 | jbot | hmm... voip-info is the Voice Over IP wiki. It is a community resource which will answer all of your questions, from Asterisk to ZTDummy. You can find it over at http://www.voip-info.org - well worth bookmarking |
| 16:31.07 | tzafrir_laptop | casio_, somewhere there, I guess |
| 16:31.42 | casio_ | thankz tzafrir_laptop :) im searching now... |
| 16:32.14 | wunderkin | if you search for call file on there, one of the first few hits will be something about auto dialing i think |
| 16:35.43 | BoRiS | Anyone know how to check in the dialplan to see if a file exists or not? I saw the wiki but those examples dont work. |
| 16:36.09 | *** join/#asterisk myiagy (n=myiagy@200.138.215.78) |
| 16:37.02 | cpatry | boris: just write a quick agi which set a chan var? |
| 16:37.11 | cpatry | agi would be really small too. |
| 16:38.02 | BoRiS | Yeah, I thought that would be my last resort. :-p |
| 16:38.57 | *** part/#asterisk Seyr (n=Seyr@rrcs-24-227-133-226.sw.biz.rr.com) |
| 16:41.39 | mutilator | cut my life into pieces! |
| 16:41.55 | watchy | i will cut you into pieces |
| 16:42.09 | mutilator | this is my lat resort! |
| 16:42.11 | mutilator | last* |
| 16:42.15 | mutilator | cd skip* |
| 16:42.18 | watchy | haha |
| 16:42.22 | watchy | want 2 kiss |
| 16:42.42 | mutilator | uh |
| 16:42.51 | mutilator | o_O |
| 16:43.10 | watchy | no ones lookin |
| 16:44.30 | *** join/#asterisk hparker (n=hparker@gentoo/developer/hparker) |
| 16:44.32 | *** join/#asterisk SplasPood (i=jwb@ludicrous.paravolve.net) |
| 16:47.46 | *** join/#asterisk steve___ (n=steve@store-fw.porchlight.ca) |
| 16:48.21 | CoffeeIV_ | my music on hold sounds like some kind of weird industrial whale song, regardless of what's playing -- I think mpg321 is not working right on my FC3 -- any suggestions ? |
| 16:48.36 | Qwell | don't use mpg321 for moh |
| 16:48.47 | Qwell | use mpg123 - go into the asterisk source dir, and `make mpg123` |
| 16:48.53 | Qwell | uninstall mpg321 first |
| 16:49.11 | *** join/#asterisk pauldy (n=pauldy@24-155-86-154.ip.grandenetworks.net) |
| 16:49.37 | CoffeeIV_ | Qwell: I'm doing it now, thanks for the suggestion |
| 16:50.05 | *** join/#asterisk E|nyPRI_ (n=les@206-45-135-175.static.mts.net) |
| 16:50.41 | *** join/#asterisk hellagony (n=egutierr@tvn95-3-82-237-157-188.fbx.proxad.net) |
| 16:51.06 | E|nyPRI_ | im screwing with realtime sip. when a peer tries to register, I get this debug msg db.c:194 ast_db_get: Unable to find key 'xten' in family 'SIP/Registry' |
| 16:51.23 | BoRiS | E|ny! |
| 16:51.27 | E|nyPRI_ | hey ma |
| 16:51.28 | E|nyPRI_ | n |
| 16:51.32 | BoRiS | E|nyPRI: Realtime is good :) |
| 16:51.54 | E|nyPRI_ | I got it working with peers for outbound.. but anything that tries to register cacks. |
| 16:53.05 | CoffeeIV_ | Qwell (or anybody): I am using x86_64, and make mpg123 failed with a compile error -- I searched on that error and found posts to the asterisk mailing list mentioning it but no resolution -- does anyone know how to fix this ? |
| 16:53.10 | *** join/#asterisk nel (n=nel@199.75.106.119) |
| 16:53.50 | nel | how can I use authentication codes for long distance calling using asterisk or SER? i.e Dial 8 + 4 digit authorization code + long distance number |
| 16:53.58 | casio_ | anybody know websites about asterisk users group in spanish ? |
| 16:54.44 | *** join/#asterisk wsuff (n=wsuff@pcp04243496pcs.eatntn01.nj.comcast.net) |
| 16:55.35 | *** join/#asterisk jtodd (n=jtodd@ti.fox-den.com) |
| 16:56.26 | CoffeeIV_ | I have a problem compile mpg123 on x86_64 -- I put the messages here if anyone can take a look: http://pastebin.ca/24313 |
| 16:57.35 | cpatry | CoffeeIV_: looks more a mpg problem rather then an * problem. |
| 16:57.52 | *** join/#asterisk SplasPood (i=jwb@ludicrous.paravolve.net) |
| 16:58.17 | nel | CoffeeIV: could it be that you need kernel headers installed? |
| 16:59.06 | nel | any ideas on how can I implement authorization codes for long distance using asterisk or ser proxy? |
| 16:59.22 | Qwell | nel: disa or authenticate |
| 17:01.01 | *** join/#asterisk Veidit (n=Veidit@willow.veidit.net) |
| 17:01.09 | nel | Qwell: Thanks I will take a look on those |
| 17:01.45 | CoffeeIV_ | nel: I have the headers installed; if that was the issue I think the compile error would be "cannot find whatever.h". cpatry: it is more of an mpg problem, but as long as it doesn't work music on hold doesn't work in * . . . |
| 17:01.46 | nel | is "Authenticate" an * or SER module? |
| 17:02.28 | *** join/#asterisk Connor- (n=billy@198-144-174-5.knx.tn.nxs.net) |
| 17:02.34 | Qwell | * |
| 17:02.41 | Qwell | show application authenticate |
| 17:02.42 | Qwell | show application disa |
| 17:03.01 | Connor- | okay, just got a TDM01, trying to get it installed.. Don't normal do zap devices.. mostly sip, someone give me any hints? |
| 17:03.34 | nel | Coffee: http://lists.digium.com/pipermail/asterisk-users/2005-September/125845.html |
| 17:03.38 | Qwell | Connor-: are you having any specific problems? |
| 17:03.49 | sozo | Hi. Calls to my ZAP lines seem to get parked automatically after just 1 ring. Anyone know what is wrong with my config? |
| 17:04.19 | Connor- | Qwell, installingt his ona virgin system, no zap devices ever been installed.. just not sure what to do. |
| 17:04.31 | Connor- | ZT_CHANCONFIG failed on channel 1: No such device or address (6 |
| 17:04.41 | ian_k | fix /etc/zaptel.conf |
| 17:04.41 | *** join/#asterisk NirS (n=NirS@eventhorizon.hosting365.ie) |
| 17:04.42 | Qwell | You need to configure it... |
| 17:04.45 | NirS | anybody home ? |
| 17:04.45 | Qwell | ~wikis |
| 17:04.47 | jbot | i heard wikis is http://www.voip-info.org |
| 17:05.06 | NirS | anyone using AMP 1.10.0009 |
| 17:05.07 | NirS | ? |
| 17:05.13 | *** part/#asterisk wsuff (n=wsuff@pcp04243496pcs.eatntn01.nj.comcast.net) |
| 17:05.38 | ian_k | AMP reminds me of Frontpage... for some odd reason. |
| 17:05.48 | Qwell | ian_k: because both suck? ;] |
| 17:06.12 | Veidit | I am connecting 2 Asterisk via IAX2 and I am reading the guide on voip-info.org but I still have some questions, could anyone give me a hand? |
| 17:06.23 | Qwell | Veidit: if you ask |
| 17:06.28 | NirS | ian, well, it may suck, but do you know a better user front end, which is free ? |
| 17:06.32 | ian_k | unnecessary bloat |
| 17:06.38 | Qwell | NirS: vi |
| 17:06.38 | ian_k | yeah |
| 17:06.40 | ian_k | vi |
| 17:06.41 | ian_k | ;) |
| 17:06.43 | NirS | amuzing |
| 17:07.05 | NirS | something that I can give one of my silly customers to use, which has no idea what notepad even looks like |
| 17:07.12 | hparker | I've got a weird problem, periodically get a tone, like someone hit a key on the phone, but no one has.. Sometimes only one side can hear it, sometimes both.. Ideas? |
| 17:07.35 | ian_k | Don't get me wrong.. AMP is a useful tool.. just not for me. |
| 17:07.44 | nel | Qwell: that's exactly what I needed thank you very much |
| 17:07.50 | *** join/#asterisk bjohnson (n=bjohnson@jecinc.tor.istop.com) |
| 17:08.04 | ian_k | hparker - what kind of line are you on when it happens? |
| 17:08.23 | hparker | ian_k: So far it's only happened IAXy to IAXy |
| 17:08.35 | Veidit | Qwell: Server A wants to connect to server B and I have two numbers that I can use in Server A, how should I set up extensions.conf then in server A so it allways connects to Server B? |
| 17:09.01 | Qwell | not enough info. connect to Server B how? |
| 17:09.05 | Qwell | and when |
| 17:09.06 | hparker | ian_k: Haven't really used the outside lines much yet, so not sure if it's happening ther |
| 17:09.43 | ian_k | hparker - I was going to suggest switching to non-inband dtmf, but that doesn't apply. |
| 17:10.22 | ian_k | not really sure what to suggest |
| 17:10.28 | Veidit | Qwell: Ah OK Server A has two sip phones, when one dials from SIP1 to server A it should create a IAX2 connection to Serve B to forward the call |
| 17:10.40 | Veidit | and the other way around when reciving a call |
| 17:10.45 | hparker | ian_k: Google doesn't either :/ |
| 17:11.08 | ian_k | is it actually dtmf or just noise? |
| 17:11.12 | Qwell | Veidit: only when SIP1 calls Server A? |
| 17:11.28 | Katty | in other mews, lab mice and regrow their own organs |
| 17:11.35 | Katty | heart, lungs, brain, etc. |
| 17:12.01 | *** join/#asterisk santiago (n=santiago@208.195.215.135) |
| 17:12.06 | Veidit | Qwell: Yes and When SIP2 Calls server A (or well lifts the phone to dial outside) |
| 17:12.29 | Qwell | So what is Server A's job? |
| 17:12.30 | Veidit | Qwell: I can draw a nice little ASCII picture to explain it better perhaps? :) |
| 17:12.36 | Qwell | if all it does is pass calls to B? |
| 17:12.51 | *** join/#asterisk santiago (n=santiago@208.195.215.135) |
| 17:12.56 | Veidit | Server A only supports IAX and mgcp but my phones use SIP :) |
| 17:12.58 | CoffeeIV_ | what do you do to make * play music on hold from WAV files ? Just put the wav files in the right directory ? |
| 17:13.05 | Veidit | Sorry Server B only supports IAX and mgcp |
| 17:13.08 | Qwell | Then how are your SIP phones going to call A? |
| 17:13.09 | Qwell | ok |
| 17:13.39 | Veidit | Qwell: I can draw a little map to show you :) |
| 17:13.45 | ian_k | CoffeeIV_ - yep |
| 17:13.48 | Veidit | Perhaps that would explain it better |
| 17:14.08 | Qwell | make a ServerB user on ServerA, and vice versa, then just use a simple Dial() |
| 17:15.36 | Veidit | Yes that I have created users but how should I config extensions.conf kind would need a IRL example if for example the phone number was 031-111111 for SIP1 and 031-222222 for SIP2 |
| 17:16.08 | *** join/#asterisk PupenoL (n=pupeno@200.123.183.89) |
| 17:16.32 | Connor- | okay, I have fxsks=1 |
| 17:16.40 | Connor- | loadzone = us |
| 17:16.42 | coppice | CoffeeIv: depends on what is in the wave file |
| 17:16.46 | Connor- | and defaultzone=us |
| 17:16.50 | Connor- | in /etc/zaptel.conf |
| 17:18.32 | *** join/#asterisk azzie (n=az@azzie.net) |
| 17:20.37 | Veidit | Qwell: Nice draing: http://willow.veidit.net/~john/sip2iax.txt if that explains it better :) |
| 17:21.05 | hparker | Next question.. Trying to setup parked calls. In the docs at voip-info.org it says just "include => parkedcalls" unless you have a more complex dial plan. What's considered a complex dial plan? I see it load parkedcalls, and create ext 700, but it doesn't do anything when I hit *700 :/ |
| 17:21.33 | ian_k | Connor-: what kind of card? |
| 17:21.50 | Connor- | TDM01B |
| 17:22.14 | Qwell | Veidit: I've never used switch. Look into it. |
| 17:22.21 | Qwell | I think thats what you need |
| 17:22.23 | ian_k | Connor-: You need to change that |
| 17:22.31 | ian_k | Connor-: fxsks=4 |
| 17:22.32 | Katty | hmm |
| 17:22.39 | Katty | hparker: you don't create extenion 700 |
| 17:22.39 | Veidit | Qwell: OK will do |
| 17:22.41 | Connor- | only have 1 model in it. |
| 17:22.44 | Katty | hparker: it's allready in there. |
| 17:22.55 | ian_k | right.. but the channel is based on the slot, not the module # |
| 17:22.55 | Katty | hparker: when you put 700 into your dialplan, it thinks you're trying to redefine that extension |
| 17:23.04 | Katty | hparker: so /of course/ it isn't doing anything. it doesn't know what to do |
| 17:23.26 | hparker | Katty: No, I'm not creating it, but it mentions it when starting up |
| 17:23.39 | ian_k | Connor-: If your fxo module is in slot 4, fxsks=4, if it's in slot 2, fxsks=2, etc |
| 17:23.45 | Katty | hparker: and is * a regular transfer or blind transfer? |
| 17:24.00 | Connor- | it's slot 1 on the board I think.. |
| 17:24.10 | ian_k | modprobe wctdm and find out |
| 17:24.14 | *** join/#asterisk rking (n=rking@ip68-105-231-56.lu.dl.cox.net) |
| 17:24.14 | hparker | Katty: I've had this box dumped on me :/ Where would I find that? |
| 17:24.38 | Katty | hparker: show features at the CLI |
| 17:25.26 | Connor- | OH HELL'S BELLS |
| 17:25.32 | Connor- | What color are the FXO's suppose to be? |
| 17:25.39 | Katty | red? |
| 17:25.51 | Katty | analog = red |
| 17:26.10 | Connor- | I think they sent me the wrong damn module in it. |
| 17:26.15 | Katty | rut roh |
| 17:26.17 | Qwell | 01 is fxs |
| 17:26.20 | Qwell | tdm01b? |
| 17:26.22 | Katty | Connor-: pull up images.google.com to be sure. |
| 17:26.59 | Connor- | http://store.yahoo.com/asteriskpbx/tdtd1pofxsbu.html |
| 17:27.10 | hparker | Katty: No such command 'show features' (type 'help' for help) :( This is * 1.0.8 |
| 17:27.10 | Connor- | shows it as a FXO |
| 17:27.22 | Katty | hparker: then type help and look for features |
| 17:27.41 | Qwell | yeah, 01 is fxo.. |
| 17:28.31 | Katty | hparker: anyway, parked calls should be an attended transfer. |
| 17:28.38 | *** join/#asterisk bjohnson (n=bjohnson@jecinc.tor.istop.com) |
| 17:28.41 | Connor- | The box said TDM01B but the sticker on the antistatic back said TDM10B |
| 17:28.47 | Katty | hparker: if you've got * mapped to blind transfer, it'll parkt hem, but you won't know where they got put. |
| 17:28.50 | Qwell | Connor-: call digium |
| 17:28.52 | Connor- | they sent the wrong cards. |
| 17:28.59 | Qwell | simple case of dyslexia |
| 17:29.02 | Katty | Qwell: haha, call digium |
| 17:29.15 | Katty | Qwell: you'd be better off calling a snobby cat ;) |
| 17:29.18 | Qwell | Katty: well, if he bought it from the yahoo store... |
| 17:29.26 | Katty | Qwell: that doesn't mean anything |
| 17:29.27 | hparker | Katty: It doesn't do anything, we continue talking after I dial *700 (still look at help for features) |
| 17:29.48 | Katty | hparker: what does * usually do for you? |
| 17:29.52 | Connor- | I really don't give a rats as, I'm simply using the card as a timing source.. but.. still.. |
| 17:30.07 | Qwell | Connor-: well then, pfft |
| 17:30.07 | hparker | Katty: Just beeps in my ear |
| 17:30.10 | ian_k | Connor-: you sure you aren't looking at the signalling? |
| 17:30.15 | Katty | hparker: ok. call 700 directly |
| 17:30.18 | Katty | hparker: what happens? |
| 17:30.37 | ian_k | Connor-: look at 'dmesg' output - that tells you for sure what module it is |
| 17:30.38 | Connor- | ian_k: No. I'm looking at the part #'s on the box and the antistatic bag. they backwards. |
| 17:30.45 | ian_k | check dmesg |
| 17:31.53 | hparker | Katty: Just beeps in my ear, we continue talking |
| 17:32.03 | Katty | hparker: no, i mean a brand new phone call. |
| 17:32.07 | Katty | hparker: no transfers. |
| 17:32.12 | *** join/#asterisk jeffgus (n=jeffgus@2002:d856:c704:0:0:0:0:1) |
| 17:32.19 | Katty | hparker: just pick up the phone and dial extension 700. what happens. |
| 17:32.21 | hparker | Katty: Gives a busy signal |
| 17:32.29 | Katty | hparker: what's the cli say? |
| 17:33.34 | hparker | Katty: Nothing, just Accepted Authenticated call from... |
| 17:33.46 | Katty | hparker: do you have a features.conf |
| 17:34.01 | Katty | bjohnson: just because i don't do geeky talk in here often doesn't mean i'm /dumb/ |
| 17:34.21 | sivana | really |
| 17:34.30 | bjohnson | but it could mean that |
| 17:34.32 | hparker | Katty: Yes, and best as I can tell it looks right... Though, I just remembered changing the number to 701 to test with.. Let me dial that |
| 17:34.38 | bjohnson | btw, don't be so defensvie |
| 17:34.42 | bjohnson | err |
| 17:34.45 | bjohnson | deference |
| 17:34.46 | bjohnson | err |
| 17:34.49 | bjohnson | defensive |
| 17:34.53 | hparker | Katty: I parked myself! |
| 17:34.57 | Katty | hparker: yay! |
| 17:35.07 | Katty | hparker: so, probably, * is set up as something else. |
| 17:35.09 | hparker | Parking oneself.. sounds bad... |
| 17:35.18 | Katty | hparker: do your phones have an attended transfer button? |
| 17:35.21 | Qwell | porking oneself.. sounds worse... |
| 17:35.41 | hparker | Katty: No, mines a cheapy cordless |
| 17:35.41 | bjohnson | as long as it's not in the back seat |
| 17:35.44 | Katty | hparker: ok |
| 17:35.49 | Katty | hparker: then don't transfer to 700 |
| 17:36.07 | Katty | hparker: transfer to whatever number you just dialed to get yourself parked. |
| 17:36.32 | Katty | hparker: if you have a features.conf, that should show what you have * mapped to |
| 17:37.00 | hparker | Katty: I parked her! ;) |
| 17:37.06 | Katty | bjohnson: hottt. |
| 17:37.22 | Katty | bjohnson: i'll be defensive if i wanna be, dangnabbit :P |
| 17:37.50 | Katty | bjohnson: you should know that females read into everything. heh |
| 17:37.59 | bendy24 | hawt |
| 17:42.19 | *** join/#asterisk gwynpen (n=gwynpen@p54AAEF55.dip.t-dialin.net) |
| 17:43.56 | *** join/#asterisk r0d3nt (i=r0d3nt@tinfoilhat.net) |
| 17:45.11 | oej | M5345 |
| 17:46.10 | oej | Thanksch |
| 17:46.22 | wunderkin | do you need me to hold your hand? :D :D |
| 17:46.35 | sivana | heh |
| 17:49.28 | Veidit | oej: Hej dƤr! |
| 17:49.44 | oej | Veidit: Halloj |
| 17:49.50 | Veidit | oej: Angelmo here hehe |
| 17:50.18 | zoa | oej! |
| 17:50.20 | zoa | OEJ! |
| 17:50.30 | oej | zoa!!! |
| 17:50.31 | Qwell | file[laptop]: You don't sleep much, do you? |
| 17:50.33 | file[laptop] | oej: yesssssssss! |
| 17:50.34 | Veidit | oej: What is your experience with IAX to IAX communication? |
| 17:50.37 | file[laptop] | Qwell: nope |
| 17:50.44 | oej | Veidit: Ask someone else |
| 17:51.01 | Veidit | oej: What is your experience with Alcohol? :) |
| 17:51.08 | oej | file: Dance for me :-) |
| 17:51.13 | zoa | tsss |
| 17:51.15 | zoa | perverts! |
| 17:51.28 | oej | zoa: You southern Europeans are so picky |
| 17:51.35 | Veidit | How can dancing be perverted? |
| 17:51.51 | oej | zoa: Or you have pervert fantasy |
| 17:51.55 | *** join/#asterisk zeedo (n=zeedo@www.reboot-robot.net) |
| 17:54.03 | Veidit | Stay calm zoa :) |
| 17:55.11 | jhiver | pack behavior :) |
| 17:55.21 | jhiver | pack of beer of course :) |
| 17:55.27 | Qwell | oej: tell file[laptop] he has to go to astricon |
| 17:55.42 | file[laptop] | I'm not mad of money :P |
| 17:55.45 | file[laptop] | er made |
| 17:55.50 | Qwell | I'm mad at money |
| 17:56.09 | file[laptop] | I bet |
| 17:56.19 | Katty | 1-800-bets-off |
| 17:56.28 | jhiver | money is a hassle when you have and even more of a hassle when you don't :) |
| 17:56.35 | *** join/#asterisk PupenoL (n=pupeno@200.123.183.89) |
| 17:57.26 | Qwell | file[laptop]: tell anthm to pay :p |
| 17:57.29 | *** join/#asterisk funxion (n=nunya@mtnuser.icgws.com) |
| 17:57.41 | *** join/#asterisk TimAAAAA (n=TimA@CPE00062567e9e1-CM0011ae90e1e2.cpe.net.cable.rogers.com) |
| 17:58.00 | TimAAAAA | Anyone have a Sipura 2002 behind NAT connected to Asterisk?? |
| 17:58.11 | Qwell | Katty: quack |
| 17:58.19 | Katty | Qwell: honk! |
| 17:58.50 | Icemaann | speaking of sipura. anyone having issues in the US with the PSTN sound quality going through a SPA-3000? |
| 17:58.58 | rayvd | TimAAAAA: YEP! |
| 17:59.15 | wunderkin | does anyone know who david troy or ben hencke is? do they come on irc? |
| 17:59.23 | TimAAAAA | Ice, I'm having that with the SPA-2002 although not sure if its my provider or not (Canada as well). |
| 17:59.27 | rayvd | Using 2002's and PAP2-NA's, no problem here. Haven't tried 3000's though. |
| 17:59.46 | TimAAAAA | Rayvd, anything special you had to set to get the thing working?? |
| 17:59.53 | zoa | file is david troy |
| 17:59.56 | zoa | sometimes |
| 18:00.00 | zoa | when he dresses up |
| 18:00.08 | file[laptop] | what?!? |
| 18:00.08 | zoa | normally he is jessica |
| 18:00.16 | rayvd | SER :) |
| 18:00.23 | wunderkin | i thought he was klinger |
| 18:00.34 | Qwell | wunderkin: from MASH? |
| 18:00.37 | zoa | the artist formerly known as file |
| 18:00.37 | wunderkin | hehe |
| 18:00.43 | *** join/#asterisk allanon (i=allanon@netblock-66-245-233-131.dslextreme.com) |
| 18:00.45 | rayvd | But setting nat=yes and qualify=yes and telling the Sipura to do NAT mapping and NAT keep alive should be enough really. |
| 18:00.47 | file[laptop] | there's a difference. |
| 18:00.48 | wunderkin | yes |
| 18:00.58 | rayvd | What sort of probs are you having? |
| 18:01.00 | TimAAAAA | SER?? |
| 18:01.09 | rayvd | SIP Express Router -- a SIP Proxy |
| 18:01.27 | TimAAAAA | Ah, not using a Proxy. |
| 18:01.42 | ronaldl79 | Weird...does anyone have a clue why MPG123 continues an MP3 from where it stopped ... e.g, held call, conference room, etc.... |
| 18:01.54 | TimAAAAA | It looks as though Asterisk is tryiing to respond to my internal IP range when I trace packets. |
| 18:01.54 | Qwell | ronaldl79: its supposed to do that |
| 18:01.55 | ronaldl79 | I don't recall this happening in the past...it just played on....now it pauses, and resumes? Weird... |
| 18:02.06 | Qwell | I thought, anyhow |
| 18:02.15 | rayvd | TimAAAAA: Do you have nat=yes set in your sip.conf file? |
| 18:02.21 | rayvd | for your sip clients? |
| 18:02.22 | ronaldl79 | Qwell...I recall it just playing MP3s continously.... |
| 18:02.51 | TimAAAAA | yes |
| 18:03.02 | rayvd | Do phones ring both directions, but there' just no audio? |
| 18:03.04 | rayvd | or one way audio? |
| 18:03.05 | TimAAAAA | I will double check though as I've made a million changes |
| 18:03.19 | TimAAAAA | Yes, no audio is where I left off last. |
| 18:03.24 | rayvd | ahh ok |
| 18:03.41 | rayvd | so the sdp/rtp audio source ip in your SIP packets is being set to the ip of your sipura then |
| 18:03.48 | ronaldl79 | Hmmm....well, since both native MP3 playback and MP123 behave the same...I guess I have to decide between which I'll use....MPG123 offers more options for playback, as oppossed to native... |
| 18:03.48 | rayvd | so your asterisk box has no idea how to get to it. |
| 18:04.03 | rayvd | so you either need to use SER to fix that, or tell the Sipura what their "real" public IP is |
| 18:04.06 | rayvd | you can do this manually in the sipura |
| 18:04.07 | TimAAAAA | Yes, it gets the internal IP not the NAT public IP |
| 18:04.12 | rayvd | or tell it to use a STUN server |
| 18:04.24 | TimAAAAA | I don't have access to either SER or STUN |
| 18:04.37 | rayvd | STUN is free, you coudl set one up. as is SER... |
| 18:04.49 | rayvd | but as a quickie test, just put the external IP in one of your Sipura's manually and see if it works |
| 18:05.20 | wunderkin | anyone know of some automated way to compare sound files? raw pcm.. i want to make sure the audio is exactly the same on all of them, no blips, gaps, etc |
| 18:05.20 | TimAAAAA | ok, give me a sec to get back to square one here |
| 18:05.34 | rayvd | SIP Tab in the sipura |
| 18:05.37 | rayvd | EXT IP field |
| 18:05.41 | rayvd | set to the public IP on your NAT box |
| 18:06.37 | oej | file: YOU HAVE TO GO TO ASTRICON! |
| 18:06.43 | Qwell | ha! |
| 18:07.09 | rayvd | i vote for GRAINFARMINGCON :( :( |
| 18:07.09 | file[laptop] | oej: ...TOO EXPENSIVE! |
| 18:07.21 | BoRiS | :)) |
| 18:07.34 | oej | file: Where are you based> |
| 18:07.45 | file[laptop] | oej: Moncton, New Brunswick, Canada |
| 18:07.49 | TimAAAAA | rayvd, then on line tab I set NAT Mapping enable yes I take it |
| 18:07.54 | oej | Another canadian |
| 18:07.56 | rayvd | yep |
| 18:07.58 | file[laptop] | yesssss |
| 18:08.01 | rayvd | and send nat keep alives |
| 18:08.06 | rayvd | default interval should be fine |
| 18:08.18 | cpatry | astricon should be in canada next year :) |
| 18:08.27 | oej | Montreal! |
| 18:08.41 | Moc_ | ;) |
| 18:08.48 | Qwell | Astricon - Hawaii |
| 18:08.50 | *** join/#asterisk Gunnar (n=gunnar@34.80-203-209.nextgentel.com) |
| 18:08.50 | cpatry | yeah montreal! |
| 18:09.01 | lathos42 | Astricon - Lansing |
| 18:09.02 | rayvd | South Pole? |
| 18:09.22 | TimAAAAA | give me a sec rayvd - now its failing registration for uknown reasons!!! :( |
| 18:09.32 | rayvd | hehe |
| 18:10.09 | lathos42 | Astricon should be in Kalamazoo, MI |
| 18:10.12 | *** join/#asterisk lnwlf (n=lnwlf@208.255.225.67) |
| 18:10.17 | Beirdo | Nah, put it in Toronto |
| 18:10.23 | Beirdo | :) |
| 18:10.52 | shido6 | Detroit |
| 18:10.55 | Beirdo | hah |
| 18:11.04 | Beirdo | right under the Ambassador Bridge |
| 18:11.30 | mutilator | kalamazoo |
| 18:11.34 | mutilator | i almost moved there |
| 18:11.39 | lathos42 | Kalamazoo has an International Airport that people could fly into |
| 18:11.41 | *** join/#asterisk Nugget (i=nugget@dazed.slacker.com) |
| 18:11.51 | shido6 | that would hurt |
| 18:11.52 | lathos42 | I lived there up until 2 years ago |
| 18:11.56 | mutilator | stryker didn't hire me tho |
| 18:11.57 | Beirdo | no offense to any Detroit residents, but that area of Detroit sucked major ass last time I saw it |
| 18:12.18 | shido6 | what part of detroit? |
| 18:12.19 | MikeJ[Laptop] | which area of detroit? |
| 18:12.29 | Beirdo | right under the Ambassador Bridge |
| 18:12.32 | rayvd | the big area |
| 18:12.33 | rayvd | with smoke |
| 18:12.33 | mutilator | it's naster over my farmers market |
| 18:12.38 | Beirdo | total ghetto |
| 18:12.46 | MikeJ[Laptop] | weell.. its the gheto, but there is some great mexican food down there |
| 18:12.58 | MikeJ[Laptop] | who else is from the area? |
| 18:13.03 | ronaldl79 | Detroit is my hometown. ;) |
| 18:13.07 | Beirdo | the border guards told us to lock our doors and not stop for anything once... when they were detouring the I75 onramps |
| 18:13.07 | hardwire | anybody used an LD only PRI? |
| 18:13.09 | lathos42 | We could have it at the Radisson Plaza Hotel in Downtown Kalamazoo.. it'll be great! |
| 18:13.13 | ronaldl79 | And yes, Denver would be a great spot for any conference. |
| 18:13.22 | Beirdo | cousins in Toledo... |
| 18:13.30 | ronaldl79 | I haven't to been to Kala in a few years now, but always enjoyed hanging out there. |
| 18:13.40 | MikeJ[Laptop] | shido6, yes, I know you.. but didn't you move out? |
| 18:13.42 | mutilator | mio, mi would be better |
| 18:13.48 | Beirdo | oooh |
| 18:13.51 | Beirdo | Mio is nice |
| 18:13.53 | hardwire | I like denver.. but thats cause I am from there |
| 18:13.53 | shido6 | I cant move too far |
| 18:13.57 | mutilator | yea |
| 18:13.59 | MikeJ[Laptop] | where do you live? |
| 18:14.01 | ronaldl79 | Has anyone been to Astricon? |
| 18:14.02 | mutilator | i'de have to drive like.. a mile |
| 18:14.02 | TimAAAAA | rayvd, ok, I've got it registered again |
| 18:14.10 | mishehu | bah. |
| 18:14.12 | shido6 | NuFone hardware is active in detroit |
| 18:14.19 | Qwell | it should be in Anaheim next year |
| 18:14.23 | ronaldl79 | If only I could afford to, I'd attend most VoIP shows...especially VON. |
| 18:14.24 | Beirdo | have friends in Fairview, MI (if I remember right) |
| 18:14.30 | mutilator | yea |
| 18:14.33 | Beirdo | been a few years |
| 18:14.33 | MikeJ[Laptop] | shido6, where do you live? |
| 18:14.43 | Beirdo | that area's nice up there |
| 18:14.43 | mutilator | well it's still there alive and kickin |
| 18:14.47 | mishehu | shido6: don't answer him, he's a stalker! |
| 18:14.49 | hardwire | http://bugs.digium.com/view.php?id=5338 :(\ |
| 18:14.49 | shido6 | Detroit and Windsor |
| 18:14.51 | MikeJ[Laptop] | heh |
| 18:14.55 | hardwire | I should probably put a disclaimer on file |
| 18:14.55 | TimAAAAA | rayvd, ok, back to no audio. I can dial an extension that is hooked to a menu and I see it getting there but no audio |
| 18:14.58 | MikeJ[Laptop] | I work in southfield |
| 18:15.03 | rayvd | hmm |
| 18:15.06 | shido6 | where in Southfield? |
| 18:15.07 | lathos42 | Kalamazoo would be cheap to get hotel rooms in.. although they just tore down the Downtowner Motel :) |
| 18:15.08 | mutilator | yup |
| 18:15.13 | *** join/#asterisk anarcat (n=anarcat@pdpc/supporter/active/anarcat) |
| 18:15.13 | mutilator | except we're tearing up the town |
| 18:15.15 | rayvd | do a tcpdump on asterisk with -s 0 and -w output.dmp |
| 18:15.18 | shido6 | I used to work at the galleria at 12 and tele for Global Crossing |
| 18:15.21 | MikeJ[Laptop] | american center building, across the freeway from the galeria |
| 18:15.21 | MikeJ[Laptop] | heh |
| 18:15.23 | rayvd | then load output.dmp in ethereal |
| 18:15.23 | mutilator | puttin in dsl |
| 18:15.28 | ronaldl79 | Southfield, Michigan...where are you near? |
| 18:15.30 | TimAAAAA | rayvd - will do |
| 18:15.33 | rayvd | see what the media IP is being set to |
| 18:15.34 | ronaldl79 | Oh, cool.... |
| 18:15.40 | ronaldl79 | I've been to that building a few times, Mike. |
| 18:15.41 | mutilator | see |
| 18:15.41 | mutilator | e |
| 18:15.44 | shido6 | i didn tknow you were so close Mike |
| 18:15.47 | anarcat | hi |
| 18:15.51 | MikeJ[Laptop] | I am |
| 18:15.52 | mutilator | everyone lives in or near michigan |
| 18:15.54 | rayvd | should be in the initial INVITE message |
| 18:15.56 | shido6 | you should try Georgio |
| 18:16.01 | shido6 | s |
| 18:16.08 | ronaldl79 | But, after 21 years, I decided Michigan was too flat, and went south to Nashville...now I'm in Denver. |
| 18:16.11 | anarcat | so, to have more than one person in one call, i have 3 solutions: MeetMe, cmd_conference and something else than asterisk |
| 18:16.14 | anarcat | right? |
| 18:16.16 | shido6 | 696 amd Greemfield |
| 18:16.22 | shido6 | greenfield |
| 18:16.25 | ronaldl79 | You're in Michigan too, shido? |
| 18:16.36 | mutilator | like the voip community is in michigan |
| 18:16.37 | shido6 | um, NuFone *is* a Michigan company |
| 18:16.37 | rayvd | you could also set canreinvite=no |
| 18:16.46 | anarcat | so with a stock asterisk (withouth cmd_conf), i'm stuck if i don't have a timer |
| 18:17.09 | shido6 | yes, ronaldl79 . |
| 18:17.17 | TimAAAAA | I don't have ethereal handy so just looking at the plain dump - give me a minute |
| 18:17.38 | anarcat | rayvd, canreinvite? |
| 18:17.41 | rayvd | k, good luck. ethereal is nice because it makes sip all purdy :) |
| 18:17.47 | lathos42 | Michigan is cool.. how many other states can you show where you live by pointing to your hand? |
| 18:17.56 | shido6 | right |
| 18:17.58 | rayvd | anarcat: sorry that was for tim |
| 18:18.20 | funxion | andyone in here using nvfaxdetect? |
| 18:18.23 | anarcat | rayvd, oh, right |
| 18:18.38 | shido6 | bleh |
| 18:18.40 | shido6 | it sux, too |
| 18:18.41 | rayvd | actually Tim, another thing you could do if the tcpdump output isn't useful is turn sip debug on in asterisk |
| 18:18.54 | rayvd | you'll see the SIP headers and the SDP contents as well with the media IP addresses |
| 18:19.17 | ronaldl79 | hahah @ lathos |
| 18:19.18 | file[laptop] | damn you all |
| 18:19.18 | funxion | hammer call analyzer is nice for sip |
| 18:19.30 | shido6 | we could do it at cobo |
| 18:19.35 | MikeJ[Laptop] | shido6, 696 and greenfield, I live at 696 and coolidge |
| 18:19.37 | shido6 | and eat in greektown |
| 18:19.40 | ronaldl79 | I like the upper peninsula better than the lower of Michigan ... the UP is a new world... |
| 18:20.33 | TimAAAAA | rayvd, I've done that too - just trying to get decent tcpdump info here. |
| 18:20.38 | ronaldl79 | Greektown was my hangout spot...was always at the Music Menu seeing Thornetta Davis, Johnnie Bassett, Brothers Groove, etc...great place for music, but it's closed now. |
| 18:20.45 | funxion | is there anyone in here that uses fas detection over sip? |
| 18:20.50 | funxion | fas=fax |
| 18:20.53 | mutilator | new world.. |
| 18:20.58 | rayvd | how much $$ for hammer call analyzer funxion ? |
| 18:21.02 | mutilator | it's like moving to canada |
| 18:21.05 | mutilator | they all say eh |
| 18:21.16 | ronaldl79 | In the UP, mutilator? |
| 18:21.16 | funxion | rayvd like 10 g's |
| 18:21.38 | rayvd | guess i'll stick with tcpdump & ethereal :) |
| 18:21.42 | hardwire | hammer call analyzer? |
| 18:21.44 | funxion | rayvd but if you get the demo and play you'll see what I mean |
| 18:21.51 | ronaldl79 | I notice 'eh' a lot here in Colorado, too...heck, I even say it these days...eh? lol |
| 18:21.51 | *** join/#asterisk coppice (n=chatzill@36.196.17.210.dyn.pacific.net.hk) |
| 18:22.03 | funxion | you can capture packets then reconstructe calls and do audio dumps |
| 18:22.11 | hardwire | http://www.empirix.com/default.asp?action=article&ID=69 |
| 18:22.14 | rayvd | does the program do the packet capturing? |
| 18:22.18 | hardwire | yes |
| 18:22.19 | rayvd | or can you give it a tcpdump file for example? |
| 18:22.23 | hardwire | well |
| 18:22.34 | hardwire | couldn't you just make an open source thing that does just this? |
| 18:22.35 | TimAAAAA | I'm getting something like udp port 16392 unreachable - although I think its my end notifying the asterisk server - not sure yet |
| 18:22.45 | rayvd | ahh |
| 18:22.56 | rayvd | TimAAAAA: does your NAT change ports? :( |
| 18:23.14 | hardwire | wtf is nbscat? |
| 18:23.14 | TimAAAAA | I'm just using a lousy Linksys |
| 18:23.25 | hardwire | is it something kpflemming and markster fantasize about? |
| 18:23.31 | mutilator | O_o |
| 18:23.39 | hardwire | if so.. they need to make a channel input for MoH |
| 18:23.40 | *** part/#asterisk anarcat (n=anarcat@pdpc/supporter/active/anarcat) |
| 18:23.43 | rayvd | have you been able to determine what media ip address your sipura is advertising in the SIP INVITE yet? |
| 18:23.49 | ronaldl79 | Very nice....I've got a parked call w/MOH and another call in conference w/MOH ... cpu util @ .03 %... |
| 18:24.00 | TimAAAAA | no, not yet, gotta get the right tcpdump parameters!!! :( |
| 18:24.07 | *** join/#asterisk shido6 (n=shido6@d221-68-210.commercial.cgocable.net) |
| 18:24.08 | rayvd | hehe |
| 18:24.13 | rayvd | -s 0 -vvv -X ! :P |
| 18:24.17 | rayvd | oh and -n |
| 18:24.41 | hardwire | ok |
| 18:24.47 | hardwire | think I am downloading the free evaluation |
| 18:24.55 | *** join/#asterisk MRH2 (n=Mr_happy@fcirc-adsl.demon.co.uk) |
| 18:24.57 | TimAAAAA | rayvd: -vvv -X I think is what I want!! :) |
| 18:25.05 | funxion | hardwire crack it |
| 18:25.18 | rayvd | -s 0 also, otherwise it truncates the packets |
| 18:25.18 | hardwire | funxion: I aren't leet |
| 18:25.21 | funxion | lol |
| 18:25.42 | rayvd | i was leet once |
| 18:25.43 | hardwire | so |
| 18:25.48 | funxion | omg |
| 18:25.49 | rayvd | it happened at the thanksgiving dinner table with all the family present |
| 18:25.49 | hardwire | ever wish you could report drivers on the road.. |
| 18:25.53 | rayvd | embarrassing times for all |
| 18:26.02 | hardwire | and have your report publically available for mocking |
| 18:26.13 | hardwire | or.. report cute women.. and give them your numbers? |
| 18:26.43 | funxion | I guess no one in here uses fax detection |
| 18:26.47 | hardwire | I found a good way |
| 18:26.52 | MRH2 | hi - is there anyway to increase controlplayback / playback volume - maybe a setting in the code somewhere? |
| 18:26.57 | TimAAAAA | rayvd: am I looking for MEDIA IP in the invite somewhere?? |
| 18:26.58 | hardwire | I just need to see if its at all a needed thing :) |
| 18:27.11 | rayvd | it'll be in the SDP body of the INVITE |
| 18:27.20 | rayvd | you'll see something like c=<ip_address> |
| 18:27.21 | funxion | hardwire how so? |
| 18:27.22 | hardwire | MRH2: maybe you should run what you want through sox first |
| 18:27.28 | coppice | funxion: I guess many people use fax detection |
| 18:27.28 | hardwire | then play it back |
| 18:27.29 | TimAAAAA | only when the call is setup or before during registration? |
| 18:27.33 | hardwire | you can do that all from the dialplan |
| 18:27.54 | *** join/#asterisk generalhan (i=general_@ip67-90-64-2.z64-90-67.customer.algx.net) |
| 18:27.55 | hardwire | funxion: by setting up an IVR to do it quickly and easily |
| 18:27.57 | funxion | coppice no one responded to me |
| 18:27.59 | rayvd | should be in the INVITE used to initiate the call |
| 18:28.03 | generalhan | whats going on everyone / |
| 18:28.07 | generalhan | ? rather ! |
| 18:28.10 | funxion | fax detection w/ * |
| 18:28.31 | *** join/#asterisk RoyK (n=roy@55.80-202-161.nextgentel.com) |
| 18:28.33 | funxion | this is my first go at it |
| 18:28.37 | MRH2 | like recoding the files to a tmp file and playing that? |
| 18:28.49 | funxion | I read all the stuff on the wiki |
| 18:28.57 | TimAAAAA | rayvd: sorry for the slowness here. Of course now I'm getting slowness to my asterisk server!!!!!!!!! |
| 18:28.57 | hardwire | MRH2: exactly |
| 18:29.02 | hardwire | or.. storing them for later use |
| 18:29.03 | funxion | tried answering the call and passing to exten => fax |
| 18:29.06 | MRH2 | good idea |
| 18:29.07 | hardwire | if fielname-normalized.gsm doesn't exist |
| 18:29.08 | hardwire | make it |
| 18:29.11 | funxion | but that didnt werk |
| 18:29.14 | hardwire | then play it back |
| 18:29.19 | generalhan | anyone here heard of or had to deal with Savvis.net ??? |
| 18:29.20 | rayvd | what exactly are you trying to do tim? sip to pstn? or sip to sip? |
| 18:29.37 | funxion | so Im looking to see if anyone has used nvfaxdetect |
| 18:29.39 | rayvd | <sipura> --- <asterisk> --- ??? |
| 18:29.50 | TimAAAAA | just for now connect my Sipura to Asterisk - then Asterisk to VoIP provider which works fine. |
| 18:29.50 | hardwire | funxion: what do you think? |
| 18:30.01 | funxion | Im sure someone has |
| 18:30.13 | funxion | just not anyone that feels like responding so far |
| 18:30.21 | hardwire | generalhan: they have a nice site :) |
| 18:30.22 | rayvd | you coudl at the very least just run a tcpdump -n udp on your asterisk box |
| 18:30.26 | rayvd | make a call and see where the rtp goes to :) |
| 18:30.28 | hardwire | what are they proposing for you? |
| 18:30.34 | generalhan | can anyone give me som suggestions on high volume VOIP providers ... around 30k minutes per month ??? the company im with now is killing me ! |
| 18:30.41 | rayvd | you might see it trying to send to 192.168.1.32 or some private IP |
| 18:30.44 | ronaldl79 | Hey guys....let's see if I have this right...for MOH...if a class isn't defined (SetMOH) for a channel, it will revert to 'default,' right? |
| 18:30.50 | rayvd | then you'll know the media ip address is being incorrectly set |
| 18:31.01 | TimAAAAA | rayvd: doing that - just taking time - finally got a tcpdump to look at so give me a sec to pour over this thing |
| 18:31.05 | hardwire | generalhan: I use teliax |
| 18:31.13 | generalhan | where are you hardwire ? |
| 18:31.16 | hardwire | alaska |
| 18:31.19 | ronaldl79 | How's your experience been with them, hardwire? |
| 18:31.19 | generalhan | hmm |
| 18:31.28 | hardwire | ronaldl79: okey doky |
| 18:31.29 | ronaldl79 | Alaska, beautiful state... |
| 18:31.44 | hardwire | I colo a machine there for IAX2 trunking/jitterbuffering |
| 18:31.49 | generalhan | harwire: what are the prices like for high volume bulk minutes ? |
| 18:31.54 | ronaldl79 | Well, I just left Vonage for BroadVoice...shutting my CallVantage line soon ... |
| 18:31.56 | hardwire | otherwise I wouldn't be able to use them .. or anybody .. very well |
| 18:32.09 | hardwire | generalhan: not bad.. give em a call |
| 18:32.20 | hardwire | they are there right now ready and waiting to tell you whats up y0 |
| 18:32.48 | TimAAAAA | <PROTECTED> |
| 18:32.51 | ronaldl79 | BroadVoice might also be an option...they have a BYOD option for business...unlimited minutes. |
| 18:33.12 | hardwire | yeh |
| 18:33.17 | hardwire | I am worried about that |
| 18:33.19 | hardwire | for some reason |
| 18:33.20 | ronaldl79 | Although some folks have their quirks with BV, and opinoins... |
| 18:33.26 | generalhan | well im with VoicePulse right now and they are working like crazy for me, but im dropping 80% of my packets on 2 hops as my packets are going to their host IP. and i cant get savvis.net to do anything about it. i really dont want to leave voicepulse, but if i cant get this resolved then i have no choice ya know ? |
| 18:33.44 | funxion | hardwire what do I think about what? |
| 18:33.46 | rayvd | nah, we care about the sdp message in the INVITE |
| 18:33.49 | rayvd | you should see something like |
| 18:33.49 | funxion | lol |
| 18:33.57 | hardwire | generalhan: don't stay on savvis's site too long |
| 18:34.00 | TimAAAAA | rayvd: checking - dont' see that yet |
| 18:34.03 | hardwire | they initiate a javascript IM with you |
| 18:34.09 | rayvd | c=IN IP4 32.32.42.42 |
| 18:34.24 | hardwire | funxion: by stupid license plate reporting idea :) |
| 18:34.28 | rayvd | you used -s 0 on your tcpdump right? |
| 18:34.33 | rayvd | the sdp body is a ways down in the packet |
| 18:34.46 | generalhan | hardwire: its not that. its that on the way to voicepulse i hit their servers on 6 of the 13 hops, and i drop 80% of my packets across the first 2 of their routers |
| 18:34.50 | TimAAAAA | rayvd: ya, just looking through all this crap |
| 18:34.55 | rayvd | heh, k |
| 18:35.02 | MRH2 | ne1 from the uk in here (not gone to the pub) and knows a milliwatt test number? |
| 18:35.03 | funxion | hardwire i think it would be like the use of cell phones without handsfree on the highway |
| 18:36.07 | hardwire | generalhan: not the same savvis I was looking at them |
| 18:36.08 | hardwire | then |
| 18:36.08 | TimAAAAA | rayvd: Ok, I think I see the SDP stuff. Looks like the right external public IP |
| 18:36.08 | rayvd | ok |
| 18:36.08 | rayvd | so |
| 18:36.08 | hardwire | funxion: so just another obnoxious peice of crap causing more accidents? |
| 18:36.08 | funxion | hardwire yup |
| 18:36.08 | rayvd | if you do a tcpdump on asterisk, make a call... do you see asterisk attempting to send rtp data to the correct public ip? |
| 18:36.14 | rayvd | and if so, is that when you get the icmp port unreachable messages? |
| 18:36.20 | hardwire | what if I say "Please verify you are using a handset by saying... " |
| 18:36.23 | hardwire | and hang up if its not verified |
| 18:36.24 | rayvd | if that is the case you need to set up port forwarding on your linksys |
| 18:36.25 | hardwire | THAT ELL TEACH EM! |
| 18:36.29 | rayvd | to forward the RTP port range |
| 18:36.32 | rayvd | 16384 to whatever usually |
| 18:36.54 | TimAAAAA | rayvd: Yes, I think so. port 16394 - I think I probably have to tell my router to pass that traffic to the Sipura right? |
| 18:37.02 | rayvd | yep |
| 18:37.06 | generalhan | hardwire: it might be the same people, they offer MANY services, its just their routers that are killing me. I have 30 users on the phone at the same time, and we drop like 50% of our calls half way through and the rest are soo choppy that our clients start yelling at us ! its not fun at all |
| 18:37.21 | TimAAAAA | ok, let me do that |
| 18:37.24 | rayvd | udp not tcp obviously... if the linksys lets you specify |
| 18:37.28 | hardwire | generalhan: report them to the BBB :) |
| 18:37.39 | generalhan | i dont have time for that |
| 18:37.44 | generalhan | i need this fixed yesterady |
| 18:37.45 | hardwire | generalhan: I suppose stay on their site.. and bitch them out when the IM pops up |
| 18:37.46 | TimAAAAA | rayvd: it does - is the port range 16384-16482?? I think I got that from somewhere. |
| 18:37.47 | generalhan | yesterday |
| 18:37.54 | hardwire | you mean the day before today? |
| 18:37.57 | rayvd | yeah it's in the sipura on the SIP tab |
| 18:37.58 | generalhan | lol |
| 18:38.03 | hardwire | do you have a special little car I don't know about |
| 18:38.04 | rayvd | 16384 - 16482 |
| 18:38.07 | hardwire | with a crazy professor named Doc |
| 18:38.14 | funxion | hardwire now if you came out with a license plate holder that you can have text presets like "let me in arsehole" or "show me your tits" or for those peeps with their brights on you could set off flash bulbs in the rear of the car , that would be something |
| 18:38.17 | hardwire | that you need to share with the rest of the world? |
| 18:38.18 | TimAAAAA | rayvd: there it is - ok, let me try this |
| 18:38.24 | generalhan | NO .. its ALL mine |
| 18:38.29 | hardwire | funxion: haha |
| 18:38.30 | hardwire | dude |
| 18:38.42 | hardwire | funxion: I wanted to use laser vibrations on the windows to do that |
| 18:38.47 | hardwire | make a sounding board |
| 18:38.49 | funxion | omg |
| 18:38.52 | funxion | that wuold rok |
| 18:38.54 | hardwire | yeh |
| 18:38.56 | hardwire | "This is god" |
| 18:38.58 | hardwire | no. |
| 18:39.00 | hardwire | not your god |
| 18:39.06 | hardwire | you will DIE! |
| 18:39.06 | hardwire | hehe |
| 18:39.12 | TimAAAAA | rayvd: holy sh*t - it works!!!!!! |
| 18:39.19 | rayvd | huzzah! |
| 18:39.23 | funxion | "pull over so I can kick your arse" |
| 18:40.01 | TimAAAAA | rayvd: thanks dude. I'm almost 100% sure I tried this combo but maybe not with all the different stuff I was trying. |
| 18:40.13 | rayvd | yeah it can get confusing :) |
| 18:40.14 | hardwire | funxion: I have only seen lasers used for receiving the vibrations |
| 18:40.15 | rayvd | np! |
| 18:40.20 | hardwire | so.. I dunno how that would work |
| 18:40.36 | hardwire | it would proabably kill my alternator just using something pwoerfull enough to shake a cars windows |
| 18:40.57 | TimAAAAA | rayvd: final question for you - can the SIP port on line1 and line2 be the same? Is this for the port on the receiving end?? |
| 18:41.21 | funxion | I was thinking something more like lasers from a concert or whatever that sit in your back deck and display on the rear window images of whatever |
| 18:41.27 | rayvd | i believe it sets the source port to that, so they should be different |
| 18:41.30 | rayvd | 5060 and 5061 typically |
| 18:41.35 | rayvd | although you could try *shrug* |
| 18:41.54 | TimAAAAA | rayvd: I'll try to put it back to 5061 (this is on line 2). I have line 1 connected elsewhere on 5060. |
| 18:42.09 | TimAAAAA | rayvd: but when I had it on 5061 it wouldn't register!!!! :( |
| 18:42.13 | hardwire | funxion: haha |
| 18:42.31 | hardwire | funxion: either way.. it would be fun to see a list of places sorted from most negative to most positive for your state |
| 18:42.41 | hardwire | esp in a state like mine where 25% are all custom plates |
| 18:42.49 | hardwire | and you see the same person day after day |
| 18:42.56 | funxion | lol |
| 18:43.12 | Connor- | can allow and disallow have stacked codecs now? like allow=ulaw,g729 ?? |
| 18:45.22 | hardwire | different lines |
| 18:45.38 | hardwire | you can check the priorities of a host by sip show peer (peername) at the CLI |
| 18:45.41 | *** join/#asterisk mhnoyes (n=mhnoyes@user-2ivfj1d.dialup.mindspring.com) |
| 18:45.47 | hardwire | or iax show peer |
| 18:46.16 | hardwire | in CVS HEAD you can also set a global or peer based way to negotiate who wins on codec negotiation |
| 18:46.51 | coppice | what's wrong with the tradition fist fight for negotiation? |
| 18:48.42 | TimAAAAA | rayvd: working now but not recognizing dtfm I guess. Can't select a menu choice. |
| 18:56.08 | mutilator | pastys |
| 18:56.13 | mutilator | thats what i was thinkin of |
| 18:56.25 | mutilator | Damned yupers say eh and eat pasties |
| 18:56.35 | mutilator | might as well be canadians |
| 18:56.49 | bendy24 | :/ |
| 19:01.02 | mutilator | Mar 27 14:50:40 WARNING[26828]: chan_zap.c:3462 zt_handle_event: Didn't finish Caller-ID spill. Cancelling. |
| 19:01.02 | mutilator | <PROTECTED> |
| 19:01.08 | mutilator | whats that? |
| 19:01.12 | mutilator | it did it for every ring |
| 19:01.24 | *** join/#asterisk dalfry (n=dalfry@gateway.ishisystems.com) |
| 19:01.27 | mutilator | first time i've seen it happen |
| 19:01.41 | mutilator | Mar 27 14:50:27 WARNING[26828]: chan_zap.c:1451 zt_callwait: Spill already exists?!? |
| 19:01.48 | mutilator | also got that twice during the ringing |
| 19:03.01 | *** join/#asterisk shres (n=sshreyas@59.92.129.169) |
| 19:03.46 | *** join/#asterisk ksh (i=ksh@217.70.144.149) |
| 19:06.16 | *** join/#asterisk tod (n=tod@207.54.140.99) |
| 19:08.44 | tod | anyone here use quintum stuff? |
| 19:09.45 | tod | I've got one set up and working except when I use it to make a call, it never sends the hangup to asterisk. If I call it, the hangup is detected fine. |
| 19:10.24 | *** join/#asterisk snitt (i=snitt@snitt.info) |
| 19:10.46 | rayvd | dunno on that one tim, any dtmf options in the sipura you might have changed accidentally? |
| 19:10.51 | snitt | hi |
| 19:11.24 | TimAAAAA | rayvd: I tried matching with what I have set in asterisk - info, inband, auto - not one works. |
| 19:11.45 | rayvd | not sure. never ran into any dtmf problems :( |
| 19:11.51 | TimAAAAA | :( |
| 19:12.34 | TimAAAAA | anyone else on why I can't get any dtmf going?? |
| 19:12.42 | shido6 | whats up? |
| 19:12.56 | rayvd | i have dtm tx method set to Auto on the Sipura |
| 19:13.05 | rayvd | dtmf |
| 19:13.08 | TimAAAAA | rayvd: and what on asterisk? |
| 19:13.22 | rayvd | nothing |
| 19:13.24 | rayvd | just defaults i guess |
| 19:13.29 | rayvd | phone, 1 sec |
| 19:13.37 | *** join/#asterisk konfuzed (n=konfuzed@H129.C72.B0.tor.eicat.ca) |
| 19:13.41 | TimAAAAA | :) - whats the default!! |
| 19:14.01 | Katty | hmm. |
| 19:14.04 | *** join/#asterisk dersteer (n=travis@24-236-197-212.dhcp.aldl.mi.charter.com) |
| 19:14.16 | Katty | mew? |
| 19:14.47 | rayvd | in sip.conf? |
| 19:14.55 | TimAAAAA | in sip.conf in the user section |
| 19:15.21 | Katty | mew?! |
| 19:15.23 | rayvd | dtmfmode, ahh... |
| 19:15.29 | rayvd | yeah i just don't have that listed and it works fine :) |
| 19:15.31 | TimAAAAA | its not a global |
| 19:15.35 | Katty | mew! |
| 19:15.39 | TimAAAAA | hmmm, interesting. I'll remove it!! |
| 19:15.50 | Katty | mew. |
| 19:17.40 | TimAAAAA | f'in thing - no dice |
| 19:17.49 | *** join/#asterisk teddyc (i=electro@never.needs.a.reasontodrink.com) |
| 19:19.02 | teddyc | anybody here use dell poweredge 2850's ? |
| 19:19.05 | *** join/#asterisk dersteer (n=travis@24-236-197-212.dhcp.aldl.mi.charter.com) |
| 19:19.50 | Katty | Supaplex: ..? |
| 19:19.58 | teddyc | im getting -200% with zttest disabled usb, vga=normal, acpi=off, noapic and disabled hyper threading |
| 19:19.58 | rayvd | heh, that's weird tim |
| 19:20.07 | rayvd | don't know much about dtmf, i guess it's more fun with tcpdump for you :) |
| 19:20.08 | rayvd | or sip debug |
| 19:21.05 | Supaplex | Katty: mew = cat, bitbull = dog. put the two together, and you've got comedy |
| 19:21.10 | Qwell | teddyc: -200% what? |
| 19:21.31 | Katty | Supaplex: to a cat, sure. but i'm not a cat. |
| 19:21.35 | teddyc | -200.012207% |
| 19:21.39 | Katty | Supaplex: you obviously don't speak Katty. |
| 19:21.43 | teddyc | with zttest and ztdummy |
| 19:21.52 | Supaplex | you mew like one, so I had to assume |
| 19:21.58 | teddyc | which i assume accounts for the horrable audio |
| 19:22.17 | TimAAAAA | rayvd: ya!!! |
| 19:22.21 | *** join/#asterisk funxion (n=nunya@mtnuser.icgws.com) |
| 19:23.09 | Katty | Supaplex: you know what they say about assuming things. |
| 19:23.09 | rayvd | tim, what codec are you using? |
| 19:23.23 | teddyc | Qwell: its crazy i get way better than that on my old pos GX110's |
| 19:23.40 | sterwill | What kind of call quality problems will a consistent zttest output of 99.987793 bring? |
| 19:24.36 | *** join/#asterisk dersteer (n=travis@24-236-197-212.dhcp.aldl.mi.charter.com) |
| 19:26.07 | funxion | so |
| 19:26.15 | TimAAAAA | rayvd: I've tried both ulaw and alaw |
| 19:27.07 | rayvd | asterisk to your provider is also g711? |
| 19:27.21 | hardwire | that would rule |
| 19:27.27 | TimAAAAA | Yes, but I haven't gotten that far yet!! :) |
| 19:27.40 | Qwell | Don't msg me |
| 19:27.44 | rayvd | oh, this is IVR on your asterisk box |
| 19:27.59 | *** join/#asterisk gpled (n=gpled@firewall.fccfurn.com) |
| 19:28.04 | TimAAAAA | rayvd: exactly |
| 19:28.13 | *** part/#asterisk tod (n=tod@207.54.140.99) |
| 19:28.14 | rayvd | oh well, i'm not sure. site:lists.digium.com dtmf on google :) |
| 19:28.18 | Qwell | TimAAAAA: dtmf mode need to be the same on Asterisk and your ATA |
| 19:28.33 | TimAAAAA | rayvd: thanks for all your other help |
| 19:28.35 | rayvd | inband should work with ulaw right? |
| 19:28.38 | rayvd | np |
| 19:28.39 | TimAAAAA | Qwell: It is. |
| 19:28.43 | *** join/#asterisk Juxt (n=Juxt@sfl-dsl-64-135-113-4-cust.host.net) |
| 19:28.55 | TimAAAAA | rayvd: yes, inband should work with ulaw but doesn't it seems |
| 19:29.03 | Juxt | good afternoon |
| 19:29.17 | TimAAAAA | rayvd: I even specifically set the ATA to use inband instead of auto and no dice. |
| 19:29.38 | rayvd | wacky |
| 19:29.47 | gpled | does asterisk come with built in voice mail? |
| 19:30.02 | jontow | yes, app_voicemail |
| 19:30.13 | Qwell | Don't msg me |
| 19:30.34 | Qwell | TimAAAAA: try the rfc mode |
| 19:30.41 | teddyc | Qwell: retarded irc client sorry |
| 19:31.14 | teddyc | Qwell: have you ever seen zttest come back with negative numbers before? |
| 19:31.28 | TimAAAAA | Qwell: I did. Although I try it again. What setting on the ATA side for that? |
| 19:31.41 | bjohnson | general notebook ram question .. my Compaq Armada manual says it will take up to 256M SDRAM. Is that the same a SODIMM? |
| 19:35.49 | TimAAAAA | Qwell: no dice |
| 19:37.35 | rayvd | http://lists.digium.com/pipermail/asterisk-users/2004-December/078738.html |
| 19:37.38 | rayvd | You see that thread Tim? |
| 19:37.48 | teddyc | Best: 0.000000 -- Worst: -203.930664 -- Average: -200.339767 |
| 19:37.48 | teddyc | thats just insane |
| 19:37.50 | *** join/#asterisk jimmy_deanPB (n=jhodapp@adsl-70-228-242-126.dsl.ipltin.ameritech.net) |
| 19:38.06 | rayvd | temperatures in barrow alaska? |
| 19:38.47 | hardwire | heh |
| 19:38.53 | hardwire | I hate northern alaska |
| 19:39.00 | *** join/#asterisk netnameus (n=netnameu@pcp05000344pcs.shrpsr01.tn.comcast.net) |
| 19:39.10 | Juxt | ahaha i've never been there but i think i hate it too |
| 19:39.28 | TimAAAAA | rayvd: checking now |
| 19:39.37 | rayvd | me neither. yet i love it. like a sister in law. |
| 19:39.48 | hardwire | heh |
| 19:40.04 | hardwire | we have offices in Deadhorse Alaska |
| 19:40.35 | Juxt | any live horses there? |
| 19:40.38 | mutilator | deadhorse.... |
| 19:40.41 | hardwire | you must be joking. |
| 19:41.01 | Juxt | here in florida we have horseshoe crabs :-) |
| 19:41.42 | bjohnson | we play horseshoes |
| 19:41.57 | Beirdo | hardwire: should they rename it to Frozenhorse? |
| 19:41.58 | bjohnson | we also hang them up |
| 19:42.08 | hardwire | Beirdo: dead will suffice |
| 19:42.17 | Beirdo | not as descriptive :) |
| 19:42.30 | hardwire | I think they freeze after they die |
| 19:42.36 | bjohnson | how about: Dogfood, Alaska |
| 19:42.46 | hardwire | Gluefactory, Alaska |
| 19:43.04 | Beirdo | well, we're sure kicking that Deadhorse |
| 19:43.05 | Beirdo | hehe |
| 19:43.14 | hardwire | oh dear lord |
| 19:43.14 | mutilator | wow |
| 19:43.15 | tzafrir_laptop | any idea who's the author of asterisk-perl and if he gave anywhere a specific license to its distribution? |
| 19:43.17 | bjohnson | you could sell them as beer coolers |
| 19:43.17 | gpled | my current voice mail computer (toshiba stratagy) has a 4 port analog card, to interface with our keysystem. also has a serial cable to do signaling. what would kind of 4 port card, would i need for the asterisk? |
| 19:43.21 | mutilator | you guys listenin to yourself? |
| 19:43.30 | hardwire | gpled: SMDI? |
| 19:43.37 | teddyc | gpled: asterisk doesnt support SMDI |
| 19:43.45 | hardwire | some day |
| 19:43.46 | hardwire | it will |
| 19:43.49 | gpled | hardwire: for the serial, yes. |
| 19:43.58 | hardwire | I hate the idea of SMDI |
| 19:44.01 | teddyc | framework is already available |
| 19:44.28 | hardwire | I think what we have here.. is a failure to communicate. |
| 19:44.39 | rayvd | or a goat! |
| 19:44.40 | rayvd | named larry! |
| 19:44.45 | hardwire | http://tdxnet.com/cgi-bin/smokeping.cgi?target=TDX.ACS.ACSSEA |
| 19:44.47 | hardwire | I hate this |
| 19:44.50 | hardwire | thats the 5th damn hop |
| 19:44.59 | *** join/#asterisk fordvoice (n=chrisf0r@rrcs-70-61-133-92.central.biz.rr.com) |
| 19:44.59 | hardwire | Alaska SUCKS! |
| 19:45.13 | fordvoice | hello |
| 19:45.15 | rayvd | but alaska wuvs you :( |
| 19:45.17 | hardwire | once it gets all the way to denver I have 5% packet loss |
| 19:45.43 | fordvoice | Who is the goto person for ASTCC |
| 19:45.51 | hardwire | actually there is a time warner telecom router that drops a good nasty percentage of our packets |
| 19:46.03 | hardwire | fordvoice: cvs log will show you the way |
| 19:46.04 | rayvd | heh, fun |
| 19:46.06 | Beirdo | god bless them |
| 19:46.22 | rayvd | there's a time warner telecom router in our path that manglges TOS/DSCP bits |
| 19:46.26 | rayvd | doesn't strip them, just changes them around! |
| 19:46.30 | hardwire | hah |
| 19:46.36 | hardwire | peer-02-so-0-0-0-0.dlfw.twtelecom.net |
| 19:46.37 | gpled | hardwire: i figure any thing over serial can not be that hard to hack out. |
| 19:46.39 | hardwire | I need to fry that router |
| 19:46.43 | hardwire | so they replace it with something better |
| 19:46.50 | hardwire | gpled: I wouldn't know |
| 19:46.59 | malverian[work] | Asterisk doesn't allow several subscribes within a single dialog, why?!!! |
| 19:47.07 | rayvd | guess you could call your isp and have them call their isp and have them call their isp and have them call time warner :) |
| 19:47.09 | hardwire | but if you were handed a 9600 baud serial link with data |
| 19:47.13 | gpled | what do you guys thing about the 4 port analog card? |
| 19:47.29 | hardwire | and a 9600 baud tcp/ip blowfish encrypted undocumented communication protocol.. |
| 19:47.34 | hardwire | which would be easier? |
| 19:47.48 | fordvoice | I will pay somebody $50.00 to help me set up ASTCC Need this bad... |
| 19:47.50 | hardwire | since you don't know the data on any of this? |
| 19:48.04 | hardwire | fordvoice: do we look like freaking peasants? |
| 19:48.13 | hardwire | do I have my goddamn will voip for food sign out? |
| 19:48.23 | hardwire | bump it up to $150.00 and we will talk |
| 19:48.29 | hardwire | :) |
| 19:48.32 | rayvd | move the decimal place over two spots to the right and he'll voip for food ;) |
| 19:48.36 | hardwire | heh |
| 19:48.40 | fordvoice | ha |
| 19:48.42 | fordvoice | haha |
| 19:48.49 | funxion | lol |
| 19:48.49 | hardwire | you know |
| 19:48.57 | hardwire | Will voip for food should be in the topic |
| 19:49.05 | funxion | for 5 g's Ill send you a server preconfigured |
| 19:49.10 | hardwire | heh |
| 19:49.32 | hardwire | fordvoice: what you are gonna find out is getting it to work with the CC company is 90% of the labor |
| 19:49.32 | teddyc | fordvoice: http://www.voip-info.org/tiki-index.php?page=ASTCC |
| 19:49.39 | fordvoice | I already have a Voice master / Sysmaster |
| 19:49.41 | teddyc | fordvoice: its not that hard |
| 19:49.46 | rayvd | wtg teddy! he was going to give hardwire 5 grand :( |
| 19:49.55 | fordvoice | TeddyC I have been there buddy doesnt say nothing |
| 19:49.58 | fordvoice | that can help me |
| 19:50.02 | funxion | hardwire I got credit card auth working in 3 days |
| 19:50.05 | hardwire | rayvd: not that I know what I am doing :) |
| 19:50.08 | fordvoice | I have reijnstalled Asterisk 4 times in the last 24 hours |
| 19:50.10 | teddyc | weird i didnt have a problem with those instructions |
| 19:50.17 | Qwell | fordvoice: let's start with this - what problem(s) are you having? |
| 19:50.21 | jhiver | fordvoice, why don't you give Xorcom a try ? |
| 19:50.21 | hardwire | funxion: I need to implement this on an island we offer service |
| 19:50.24 | *** join/#asterisk eipi (n=eipi@66-87-235-201.fibertel.com.ar) |
| 19:50.24 | rayvd | so you're no different than most contracters then ;) |
| 19:50.32 | hardwire | because the telco out there sucks el butt mo |
| 19:50.35 | fordvoice | I cannot get it to connect with the database after I get it installed |
| 19:50.37 | jhiver | I've tried it a few days ago and it really kicks ass |
| 19:50.38 | teddyc | fordvoice: dont feel bad ive got problems that nobodys got answers to |
| 19:50.40 | funxion | I implemented this on a cruise ship |
| 19:50.45 | fordvoice | haha |
| 19:50.47 | hardwire | they are to cheap to pass CID back and forth |
| 19:51.18 | *** join/#asterisk stkn_ (i=nobody@gentoo/developer/pdpc.active.stkn) |
| 19:51.21 | fordvoice | I got a fresh install now and have not cvs'd it down or nothing |
| 19:51.26 | funxion | fordvoice I had same prob while back one sec |
| 19:51.28 | jhiver | hardwire, which island? |
| 19:51.37 | funxion | its something with the database struct from the wiki |
| 19:52.07 | hardwire | st paul.. services by AT&T/Alaskom |
| 19:52.36 | funxion | no wait you said you connot get it to connect |
| 19:52.39 | hardwire | damnit |
| 19:52.47 | jhiver | hardwire, googling for it :) |
| 19:52.48 | hardwire | I am about to put a 400mw 802.11g card in this laptop |
| 19:53.02 | hardwire | I hope they like that I ran out of parts |
| 19:53.08 | *** join/#asterisk dudes (n=dudes@12-215-34-84.client.mchsi.com) |
| 19:53.12 | hardwire | I hope their balls fall off too |
| 19:53.13 | *** join/#asterisk alexhopper (n=a27386@CPE000103d29ae2-CM001225dfdfe0.cpe.net.cable.rogers.com) |
| 19:53.23 | funxion | fordvoice did you say it wont connect or it wont write to db? |
| 19:53.47 | fordvoice | I get db creation filure |
| 19:53.50 | fordvoice | failure |
| 19:54.05 | funxion | do you have mysql installed? |
| 19:54.21 | jhiver | hardwire, I guess this island of yours must be pretty cool in the winter since it's off canada :) |
| 19:54.24 | funxion | just create it by hand |
| 19:54.28 | jhiver | how many ppl live on this rock, |
| 19:54.29 | jhiver | ? |
| 19:54.30 | funxion | its not that hard |
| 19:54.36 | fordvoice | yes |
| 19:54.41 | fordvoice | I did |
| 19:54.42 | hardwire | jhiver: off canada? |
| 19:54.45 | hardwire | its off the fucking map |
| 19:54.49 | fordvoice | but when you goto the brands |
| 19:54.53 | bjohnson | anything off canada sucks |
| 19:54.56 | fordvoice | it says db not created yet |
| 19:55.01 | jhiver | lol jeez |
| 19:55.08 | hardwire | jhiver: st paul island ak ins in the middle of the bering sea.. off of Alaska |
| 19:55.15 | jhiver | ooh |
| 19:55.22 | jhiver | even better :) |
| 19:55.23 | bjohnson | only cause we let it be there |
| 19:55.23 | jhiver | cool :) |
| 19:55.26 | hardwire | its fucking chilly |
| 19:55.40 | hardwire | the wind will put hair on your body you didn't know you could grow |
| 19:55.42 | fordvoice | here in cinci its going down to 40 tonight |
| 19:55.50 | jhiver | hardwire, lol |
| 19:56.06 | hardwire | I didn't believe it before I went out there |
| 19:56.15 | hardwire | and even with the most clothes I have ever worn.. the wind penetrated in |
| 19:56.20 | hardwire | which is funny |
| 19:56.25 | jhiver | hardwire, what brought you there? Opportunities for VoIP buiding? |
| 19:56.25 | hardwire | cause nobody builds a house worth a crap out there |
| 19:56.26 | jhiver | :) |
| 19:56.39 | hardwire | jhiver: I work for the native corporation of St Paul Island |
| 19:56.50 | jhiver | wtf is that? |
| 19:57.01 | hardwire | its a corporation.. native owned.. of St Paul Island |
| 19:57.23 | bjohnson | some names are too confusing |
| 19:57.23 | mutilator | O_o |
| 19:57.39 | hardwire | the name of the Corporation is Tanadgusix Corporation |
| 19:57.45 | jhiver | it's not very clear what this corporation does apart from being 'native' :) |
| 19:57.57 | jhiver | what do you do? |
| 19:58.01 | jhiver | - "we're native!" |
| 19:58.20 | bjohnson | you get better answers form other companies? |
| 19:58.39 | hardwire | jhiver: when the alaskan natives were bought out basically.. they were given $927 million dollars seperated into 12 regional corporations and over 120 smaller corporations |
| 19:58.43 | hardwire | including a generous supply of land |
| 19:58.44 | jhiver | yeah well, AT&T does like, telecommunications and well |
| 19:58.50 | hardwire | what my company does basically.. is own an island |
| 19:58.52 | jhiver | G.E. used to do electrics I guess :) |
| 19:58.58 | hardwire | and a few other parts of other ones |
| 19:59.01 | hardwire | and we sell dirt |
| 19:59.01 | hardwire | :) |
| 19:59.14 | hardwire | since we own 90% of St Paul Island.. our shareholders (apx 400) are on the island |
| 19:59.26 | hardwire | to keep them smart .. we established internet on the island 10 or so years back |
| 19:59.38 | hardwire | and I do the wireless/cable modem systems on that island |
| 19:59.49 | jhiver | ah cool... so this is an island with like a few thoushand ppl on it |
| 19:59.55 | hardwire | yup |
| 19:59.59 | jhiver | xclnt :) |
| 20:00.04 | hardwire | its the largest crab processing plant for America |
| 20:00.12 | jhiver | and I thought I was living in a lost place :) |
| 20:00.20 | jhiver | for real? |
| 20:00.26 | mutilator | the island sounds like it sucks |
| 20:00.47 | Juxt | i bet it smells nice |
| 20:00.48 | hardwire | hahah |
| 20:00.54 | hardwire | mutilator: yah.. and I want you to work for me :) |
| 20:00.57 | hardwire | either way |
| 20:01.00 | jhiver | mutilator, what do you know, often in cold countries you get crazy social life :) |
| 20:01.11 | jhiver | 'cause ppl ain't got nought better to do |
| 20:01.14 | hardwire | long distance from the island is apx 0.18/minute |
| 20:01.28 | hardwire | so we did voip trunking of our corporation HQ in Anchorage.. to the buildings on st paul |
| 20:01.33 | hardwire | thats the voip side of things |
| 20:01.40 | jhiver | hardwire, nice margin to make but with only a few thoushand ppl... |
| 20:01.46 | hardwire | now we have offices in hawaii and california.. all being trunked together |
| 20:01.55 | hardwire | jhiver: the uplink costs way too much |
| 20:02.01 | hardwire | we charge cable customers around $75/mo |
| 20:02.10 | bjohnson | try to get transferred to one f the other offices |
| 20:02.12 | hardwire | we are hemmoraging money |
| 20:02.23 | hardwire | but they are also our shareholders.. and my boss is a pussy |
| 20:02.26 | mutilator | yea |
| 20:02.43 | hardwire | they bitch. he bends |
| 20:02.47 | hardwire | they don't pay.. he does nothing |
| 20:03.13 | jhiver | I don't understand |
| 20:03.15 | hardwire | he won't pay me for the labor of putting up a real broadband subscriber gateway |
| 20:03.26 | jhiver | you're saying you're loosing money with long distance @ 0.18? |
| 20:03.42 | hardwire | jhiver: no we lose money on the cost of our sat for our broadband users |
| 20:03.51 | hardwire | our long distance is flat out rape. |
| 20:04.00 | jhiver | oh well |
| 20:04.13 | jhiver | just reduce bandwith and filter p2p then :) |
| 20:04.22 | hardwire | so we use voip over our already too expensive sat space.. to make up for things |
| 20:04.36 | jhiver | I see |
| 20:04.37 | hardwire | jhiver: we can't .. my boss won't permit it because his neice needs to download all her illegal music |
| 20:04.43 | *** join/#asterisk DougRoyer (i=doug@70-67.69-92-cpe.cableone.net) |
| 20:04.43 | hardwire | see.. its a really bad place to be in |
| 20:04.47 | jhiver | hardwire, lol :) |
| 20:04.53 | hardwire | since he is related to 50% of the shareholders |
| 20:04.54 | Juxt | traffic shaping! |
| 20:04.57 | hardwire | he won't stick it to em |
| 20:05.12 | jhiver | until some idiot starts to offer WiMax / VoIP service on the island I guess |
| 20:05.13 | hardwire | Juxt: traffic shaping is effective.. but not totally effective when the demand is already too high |
| 20:05.21 | hardwire | jhiver: we do |
| 20:05.34 | jhiver | but then with only a few thoushand ppl it might not be worth the effort |
| 20:05.41 | *** join/#asterisk ManxPower (n=eric@stirprop-s4-0-0-21.ndcr2.datasync.net) |
| 20:05.47 | Juxt | when demand rises you downgrade p2p to nothing |
| 20:05.53 | jhiver | I mean the island I live on is 800,000 ppl and it is a small market already |
| 20:05.56 | hardwire | Juxt: basically |
| 20:05.57 | Juxt | that's what i have in my office |
| 20:05.59 | hardwire | and cache everything |
| 20:06.01 | Juxt | nothing is wrong with that |
| 20:06.10 | hardwire | its hard working with this employer |
| 20:06.20 | Juxt | if you're on an island i'd also look into doing proxy peering |
| 20:06.30 | hardwire | Juxt: we do that |
| 20:06.31 | Juxt | to keep as much of the "internet" on the island as possible |
| 20:06.41 | hardwire | we transparently cache everybody on the island |
| 20:06.42 | *** join/#asterisk epablo (n=epablo@200.75.139.188) |
| 20:06.47 | hardwire | up to 40 gig cache size |
| 20:06.50 | epablo | Hi people |
| 20:07.02 | jhiver | hiya |
| 20:07.07 | hardwire | its like 2% used |
| 20:07.24 | hardwire | most all the traffic is p2p.. which I never minded blocking but we would get people refusing to pay whenever I did that |
| 20:07.34 | epablo | Anyone know this error. I got a server dieing on me with this error as the last thing on the console |
| 20:07.35 | hardwire | which is fine.. but we still need to like pay for the sat time |
| 20:07.36 | epablo | <PROTECTED> |
| 20:07.36 | epablo | Sep 30 15:01:00 WARNING[14889]: codec_g729.c:196 g729tolin_framein: Invalid data (9 bytes at the end) |
| 20:07.42 | jhiver | hardwire, I think this is really quite funny :) |
| 20:07.50 | hardwire | jhiver: in a mocking sort of way? |
| 20:07.55 | jhiver | maybe you should look into "netequalizer" |
| 20:07.59 | hardwire | its a tough situation when you look at the reality of it |
| 20:08.12 | jhiver | it doesn't block but penalizes depending on the amount of bandwith that you've been using |
| 20:08.14 | lathos42 | hardware: You could always call up the RIAA and MPAA and inform them of a large case of infringement anonymously :) |
| 20:08.18 | jhiver | looks kinda cool |
| 20:08.32 | hardwire | jhiver: I wonder if it can QoS IAX |
| 20:08.33 | ManxPower | hardwire, Um, let them cancel their account |
| 20:08.57 | jhiver | hardwire, no, not mocking, but I like the idea of a bunch of ppl saying "fuck it I can't download movies I can't pay" :) |
| 20:09.01 | *** join/#asterisk andrewsbenjamin (n=chatzill@miro.voltaiccommerce.com) |
| 20:09.02 | *** join/#asterisk ikey (i=ikey@220.226.30.77) |
| 20:09.13 | hardwire | ManxPower: they cancel their accounts.. we pay for their share |
| 20:09.34 | jhiver | hardwire, maybe the best way to reduce bandwith is to have a massive local FTP server with lots of warez on it :) |
| 20:09.45 | hardwire | jhiver: wheres the most rural place you have been? |
| 20:09.48 | Beirdo | and mirror all the pr0n sites |
| 20:09.49 | hardwire | nobody makes sense this far out |
| 20:09.54 | *** part/#asterisk Juxt (n=Juxt@sfl-dsl-64-135-113-4-cust.host.net) |
| 20:10.12 | jhiver | hardwire, south west of france, farmer's village with 300 ppl |
| 20:10.16 | hardwire | Beirdo: we are going to get another squid server ste up on the far end of our sat link |
| 20:10.18 | jhiver | lived there for like 10 years |
| 20:10.21 | hardwire | for cache informing |
| 20:10.33 | jhiver | fortunately I was a kid so I didn't realize how much it sucked |
| 20:10.37 | Beirdo | good idea. |
| 20:10.39 | hardwire | so that it goes out and checks for out of date freshness before sending anything over |
| 20:10.53 | hardwire | because still having a squid server on the near side.. isn't totally effective for its purpose |
| 20:11.00 | hardwire | you need to have it consult another one about a request |
| 20:11.19 | Beirdo | for best results, yeah |
| 20:11.21 | jhiver | hardwire, how about using some kind of "speed boosting" proxy techology |
| 20:11.22 | jhiver | ? |
| 20:11.35 | hardwire | compression and sat. |
| 20:11.38 | jhiver | you know, stuff that will compress HTML and JPGs and stuff |
| 20:11.38 | hardwire | never really works all that well |
| 20:11.40 | mutilator | you mean making pictures look like crap so they load faster? |
| 20:11.50 | jhiver | mutilator, yeah exactly :) |
| 20:11.53 | hardwire | heh |
| 20:11.56 | hardwire | mutilator: we thought about uit |
| 20:12.00 | hardwire | I even made an example one |
| 20:12.03 | mutilator | we use propel |
| 20:12.06 | hardwire | propel? |
| 20:12.07 | mutilator | for web acceleration |
| 20:12.11 | mutilator | www.propel.com |
| 20:12.14 | hardwire | jhiver: http://www.netequalizer.com/nda.htm |
| 20:12.15 | hardwire | looks nice |
| 20:12.18 | lathos42 | It would be a good way to discourage people wasting bandwidth on porn :) |
| 20:12.20 | hardwire | I wouldn't mind testing it out |
| 20:12.29 | hardwire | looks like a little FBD/Linux server |
| 20:12.36 | hardwire | I would more or less like to know how it all works first. |
| 20:12.38 | mutilator | can be |
| 20:12.39 | Beirdo | porn makes the internet go |
| 20:12.40 | Beirdo | heh |
| 20:12.41 | mutilator | we use them tho |
| 20:12.54 | hardwire | well I am open to suggestions |
| 20:12.58 | hardwire | I really need people to go out there and like |
| 20:13.00 | hardwire | do this shit |
| 20:13.03 | mutilator | i accidentally purged my entire mailbox about 2 weeks ago |
| 20:13.03 | jhiver | hardwire, there are some docs |
| 20:13.07 | hardwire | I am a one man show.. and its too much work |
| 20:13.07 | mutilator | so i don't have their emails anymore |
| 20:13.13 | mutilator | else i'de forward some of the stuff |
| 20:13.14 | jhiver | there is also an OSS project behind it: |
| 20:13.18 | *** join/#asterisk BBRodrigueZ (n=john@p54B01A7D.dip0.t-ipconnect.de) |
| 20:13.19 | jhiver | "bandwitharbitrator" |
| 20:13.28 | hardwire | jhiver: I saw that |
| 20:14.22 | hardwire | so Layer 7 is pattern matching on tcp/ip |
| 20:14.25 | hardwire | I take it |
| 20:14.41 | jhiver | anyways it *looks* like a decent solution, and their solution is about $2k incl. hardware |
| 20:15.05 | andrewsbenjamin | can anyone recommend an iax termination company that isn't over their heads with too many subscribers |
| 20:15.20 | mutilator | i can terminate your iax for free |
| 20:15.24 | hardwire | jhiver: well it needs to happen |
| 20:15.34 | mutilator | kill all calls on intercept? |
| 20:15.43 | jhiver | hardwire, what do you mean? |
| 20:15.44 | hardwire | heh |
| 20:15.51 | hardwire | jhiver: a human body needs to go out there and install it |
| 20:15.55 | hardwire | that isn't shaped like me |
| 20:16.01 | hardwire | or for that matter.. is me.. |
| 20:16.02 | hardwire | :) |
| 20:16.10 | jhiver | hardwire, I really don't get u |
| 20:16.16 | mutilator | i'll do it! |
| 20:16.19 | mutilator | er wait.. |
| 20:16.24 | hardwire | jhiver: all I am trying to say is.. I do not want to go do it :) |
| 20:16.25 | mutilator | popsicle... |
| 20:16.28 | mutilator | hmm |
| 20:16.29 | jhiver | aaah |
| 20:16.32 | hardwire | because of other projects I keep dealing with |
| 20:16.36 | jhiver | but I thought you *were* on the island |
| 20:17.03 | mutilator | i've been really side tracked all day |
| 20:17.05 | mutilator | i dunno why |
| 20:17.08 | mutilator | i start workin on something |
| 20:17.18 | hardwire | I had coffee |
| 20:17.21 | hardwire | and I have been running around |
| 20:17.24 | hardwire | chewing on odd things |
| 20:17.28 | hardwire | freaking out online |
| 20:17.36 | hardwire | jhiver: I am in Anchorage |
| 20:17.38 | hardwire | in my office |
| 20:17.38 | mutilator | i always chew on things |
| 20:17.41 | hardwire | nice and cozy |
| 20:17.49 | mutilator | i'de never get my job done if i didn't have a constant supply of new pens |
| 20:18.17 | hardwire | hah |
| 20:18.19 | hardwire | same here |
| 20:18.21 | jhiver | hardwire, so you're working for this "native company" but the natives are not that dumb: they actually move /away/ from the damn island :) |
| 20:18.38 | hardwire | the smart ones do |
| 20:18.43 | hardwire | I am left supporting the dumb ones |
| 20:18.44 | hardwire | but |
| 20:18.47 | hardwire | my boss is 50% dumb |
| 20:18.51 | hardwire | so that sorta sucks |
| 20:18.56 | jhiver | it's really quite funny :) |
| 20:18.59 | hardwire | hush |
| 20:19.02 | hardwire | its a job |
| 20:19.08 | jhiver | yeah yeah sure! |
| 20:19.15 | hardwire | I like the people |
| 20:19.20 | hardwire | but man.. duuuuuh |
| 20:19.23 | hardwire | every once in a whiel |
| 20:20.24 | jhiver | anyway so instead of being in a little frosty island you're on a huge frosty continent with all modern comfort... I can see why this seems such an improvement! |
| 20:20.27 | mutilator | damnit |
| 20:20.42 | mutilator | FSCK ! |
| 20:20.44 | mutilator | ARGH! |
| 20:20.49 | mutilator | i just got the "if you'de like to stay late and do this i'de appreciate it call" |
| 20:21.10 | lathos42 | mutilator: sucker |
| 20:21.15 | mutilator | i usually say no |
| 20:21.17 | jhiver | AlaskaFest is two jam-packed weeks of festivities and retail events in Anchorage to celebrate the turn of the season. Food, entertainment, shopping, and theater ā it's all happening in Anchorage, Oct. 14 - 30, 2005. |
| 20:21.17 | mutilator | and it's friday |
| 20:21.18 | hardwire | jhiver: explain? |
| 20:21.20 | lathos42 | mutilator: Shouldnt have answered your phone |
| 20:21.22 | mutilator | and my DDR pads were delivered today |
| 20:21.23 | jhiver | sounds like a lively place :) |
| 20:21.31 | mutilator | so i think i'm just going to go home |
| 20:21.35 | hardwire | mutilator: I am not hiring if you play DDR |
| 20:21.41 | mutilator | haha |
| 20:21.43 | mutilator | why not |
| 20:21.52 | hardwire | DDR is of the devil |
| 20:21.56 | jhiver | oooh DDR is fun :) |
| 20:22.04 | hardwire | all of you.. not for hire. |
| 20:22.09 | mutilator | i forced my gf to play it in the mall, was like taking her eyes out with spoons |
| 20:22.09 | pifiu | hey evye3rone |
| 20:22.26 | mutilator | and when i got home she was like " OMG OMG OMG WE NEED TO BUY THAT FOR THE XBOX!" |
| 20:22.36 | mutilator | i was like hell yea |
| 20:22.38 | jhiver | hardwire, I don't care I work for myself so my boss *is* an idiot but I forgive me :) |
| 20:23.10 | jhiver | mutilator, you sucker! use pydance, damnit! |
| 20:23.24 | jhiver | the Xbox... pfff... so un-geek... |
| 20:23.28 | mutilator | heh |
| 20:23.35 | hardwire | heh |
| 20:23.36 | mutilator | xbox is geek |
| 20:23.40 | mutilator | it's a fsckin pc |
| 20:23.52 | funxion | jhiver not if you've chipped it and r using it for streaming media |
| 20:23.52 | jhiver | yeah but like a WINDOWS pc :) |
| 20:24.02 | mutilator | so what |
| 20:24.04 | mutilator | i love my windows |
| 20:24.04 | funxion | jhiver windows is so ungeek |
| 20:24.06 | lathos42 | geek is buying the Gamecube Broadband adapter just so you can say you have it :D |
| 20:24.15 | jhiver | funjon, sure there are exceptions, but DDR isn't one :) |
| 20:24.23 | funxion | what is ddr? |
| 20:24.32 | mutilator | dance dance revolution |
| 20:24.33 | jhiver | Dance Dance Revolution |
| 20:24.40 | funxion | o no wonder I havent heard of it |
| 20:24.42 | mutilator | a game where ya dance on a pad |
| 20:24.44 | hardwire | hey |
| 20:24.44 | funxion | lol |
| 20:24.51 | hardwire | les dancing more voipin |
| 20:24.55 | *** join/#asterisk miztic (n=gerard@rarcoa.com) |
| 20:24.57 | hardwire | q: about traceroutes |
| 20:25.04 | *** part/#asterisk opus__ (n=opus@dahphish.org) |
| 20:25.07 | jhiver | that stuff with arrows that little girls giggle on in arcade rooms |
| 20:25.12 | jhiver | very fsking addictive |
| 20:25.23 | funxion | yeah Im still wondering to use app rxfax do I need to have a digium card in the box? |
| 20:25.28 | jhiver | geek sport :) |
| 20:25.31 | hardwire | ever seen a host give packet loss, only to try to traceroute a few hops out of that peer.. and it doesn't |
| 20:25.33 | mutilator | http://aaroninjapan.com/ddrindex.html |
| 20:25.37 | hardwire | for instance.. I get massive loss going to a host |
| 20:25.42 | hardwire | and it reports it halfway down the peering list |
| 20:25.44 | mutilator | click the what is ddr |
| 20:25.45 | funxion | I love watching big breasted women dance on those games |
| 20:25.55 | hardwire | but if I go just passed that lossy host .. I get no loss |
| 20:25.56 | funxion | Ill sit in d&B for hours at the bar watchin em |
| 20:25.58 | hardwire | its weird |
| 20:26.06 | hardwire | oop nevermind.. it kicked in |
| 20:26.08 | hardwire | 12% loss |
| 20:26.15 | hardwire | thank god for jitter buffers |
| 20:26.20 | hardwire | and speex |
| 20:26.21 | hardwire | I love speex |
| 20:26.44 | jhiver | hardwire, what ATA / IP phone actually supports speex? |
| 20:26.47 | rayvd | some routers block the traceroute udp packets... |
| 20:26.54 | jhiver | it would be cool to have a phone that does wideband voice |
| 20:26.58 | hardwire | jhiver: none that I know of |
| 20:27.05 | rayvd | nanog has a traceroute tool that lets you see which routers are stripping TOS/DSCP bits |
| 20:27.07 | hardwire | jhiver: use speex w/ kphone |
| 20:27.21 | *** part/#asterisk epablo (n=epablo@200.75.139.188) |
| 20:27.22 | hardwire | nanog? |
| 20:27.26 | jhiver | nyeah but softphones... yuk |
| 20:27.40 | rayvd | north american network operator's group.. they have a useful mailing list |
| 20:27.46 | jhiver | http://www.lik-sang.com/ <- for ddr and geek shopping |
| 20:28.11 | *** part/#asterisk gwynpen (n=gwynpen@p54AAEF55.dip.t-dialin.net) |
| 20:29.07 | rayvd | http://www.usinglinux.org/net/ntraceroute.html |
| 20:29.28 | jhiver | now this is THE ddr mat: |
| 20:29.30 | jhiver | http://www.lik-sang.com/info.php?category=22&products_id=3221& |
| 20:30.26 | mutilator | jhiver: i just got 2 of em |
| 20:30.30 | mutilator | that model |
| 20:30.53 | mutilator | cept it's ps2 and xbox |
| 20:31.34 | *** part/#asterisk gpled (n=gpled@firewall.fccfurn.com) |
| 20:31.45 | mutilator | theys be waiting for me at home right now |
| 20:31.49 | *** join/#asterisk shyru (n=shyru@200.94.130.194) |
| 20:32.37 | hardwire | mutilator: who do you DDR dual with? |
| 20:33.29 | mutilator | my friends play it |
| 20:33.46 | shyru | hi all!!! |
| 20:33.56 | mutilator | i'm ok at it |
| 20:33.57 | shyru | asterisk rulz! |
| 20:34.10 | mutilator | i'll be beatin all the asian kids in the mall now tho |
| 20:34.13 | mutilator | got my own |
| 20:34.15 | mutilator | :P |
| 20:34.25 | shyru | whasa mutilator |
| 20:34.37 | mutilator | oh.. |
| 20:34.48 | mutilator | making a commission module for our sales reps |
| 20:34.56 | mutilator | waiting for 5 to roll around |
| 20:35.09 | mutilator | so i can RUN out the door |
| 20:35.18 | mutilator | before someone else calls me |
| 20:36.08 | hardwire | ipmanager@twtelecom.net is getting a little peice of my mind today. |
| 20:36.47 | mutilator | heh |
| 20:36.51 | *** join/#asterisk ixx (i=foobar@cpe-24-27-44-163.austin.res.rr.com) |
| 20:36.56 | mutilator | i'm gettin 30-50% packet loss to mtu.edu today |
| 20:37.02 | mutilator | aparently someone posted a video on there |
| 20:37.11 | mutilator | and they're having outbout bandwidth spikes of 100mbit |
| 20:37.22 | hardwire | hesus |
| 20:37.24 | hardwire | whats the video? |
| 20:37.27 | lathos42 | whoops |
| 20:37.28 | mutilator | no idea |
| 20:37.33 | funxion | does nayone here have any experience connecting an * box to a quintum? |
| 20:37.34 | mutilator | thats just the email i got back from dave |
| 20:37.37 | generalhan | mutilator: you think thats bad try running 30 VOIP phones with 80% packet loss to your host ... WAY worse |
| 20:37.47 | generalhan | lol |
| 20:38.00 | mutilator | http://bloodshot.tc.mtu.edu/performance/main.php?BSID=1 |
| 20:38.37 | mutilator | heh |
| 20:38.46 | mutilator | i have 200 customers on a wireless wan |
| 20:38.49 | *** join/#asterisk marv[work] (n=timr@border0hsv.asterisksgi.com) |
| 20:38.55 | mutilator | i have enough problems with packetloss/latency |
| 20:38.56 | mutilator | everyday |
| 20:38.57 | hardwire | all looking at it? |
| 20:39.10 | mutilator | hardwire? |
| 20:39.35 | lathos42 | wooo.. I shouldnt have just chugged that half quart of water.. |
| 20:39.46 | mutilator | mm sounds good |
| 20:39.46 | mutilator | bbmin |
| 20:39.57 | hardwire | don't mind me! |
| 20:40.02 | shyru | guys! i have a problem with DISA auth method and spa 841. I have restrictions whe i make a call to cellular, with sipura ata 200 that ok the Disa auth does runs, but when i probe spa841 going to call but never use disa auth method. Ideas? |
| 20:40.15 | hardwire | lathos42: you should have |
| 20:40.17 | hardwire | but |
| 20:40.21 | hardwire | are you pissing yourself now? |
| 20:40.38 | hardwire | mutilator: I hate packet loss |
| 20:40.40 | hardwire | I hate it |
| 20:40.44 | hardwire | like the sun hates my butt |
| 20:41.17 | shyru | so? |
| 20:41.19 | lathos42 | hardwire: Naah.. But i'm sick, so tipping my head back for that long was a bad idea |
| 20:41.25 | hardwire | hahaha |
| 20:41.28 | hardwire | brain == booger |
| 20:42.07 | mutilator | hm |
| 20:42.25 | lathos42 | My boss has to be pretty tired of me stinking the room up with cherry halls :) |
| 20:42.37 | hardwire | and pissing yourself no doubt |
| 20:42.49 | mutilator | least the halls cover the piss smell eh |
| 20:42.53 | lathos42 | I dont have an incontinence problem |
| 20:43.38 | lathos42 | I'm trying to decide if I want to go see Serenity tonight |
| 20:43.45 | mutilator | ok |
| 20:43.47 | mutilator | wth is that movie about |
| 20:43.54 | mutilator | i keep seeing ppl say omg i can't wait |
| 20:43.58 | mutilator | and i've never even heard of it |
| 20:44.08 | mutilator | but then again i don't watch tv either |
| 20:44.15 | lathos42 | Its based on the TV show Firefly :) |
| 20:44.25 | mutilator | which i've also never heard of |
| 20:44.41 | dalfry | hello, I am trying to get the "on demand" recording working on asterisk at home 1.3. have defined automon in features.conf and have added wW to the DIAL_OPTIONS. Any idea why it would still not work? |
| 20:45.55 | lathos42 | I ended up getting the DVDs from Netflix because I kept hearing that it was good.. And it was |
| 20:48.25 | *** join/#asterisk Corndawg_ (i=whoisit@c-66-176-249-51.hsd1.fl.comcast.net) |
| 20:48.35 | mutilator | whats it about tho |
| 20:48.36 | mutilator | like.. |
| 20:48.37 | mutilator | ? |
| 20:49.43 | lathos42 | Its about a ship and its crew.. on the outskirts of the galaxy, trying to stay alive.. The movie focuses on the psychic girl on the ship and how the government wants her back |
| 20:50.13 | lathos42 | Good wholesome family entertainment :) |
| 20:50.14 | mishehu | psychic girls are dangerous |
| 20:50.21 | mishehu | they'll always know when you want to bang 'em |
| 20:50.43 | lathos42 | mishehu: That's why you wear your tinfoil hat when you're around them.. then they cant pickup your brainwaves |
| 20:51.01 | mishehu | lathos42: but what about "little bender" ? |
| 20:51.03 | *** join/#asterisk eipi (n=eipi@66-87-235-201.fibertel.com.ar) |
| 20:51.14 | mishehu | the other antenna might still be err... transmitting |
| 20:51.15 | eipi | ne1 from argentina? |
| 20:51.40 | anthm | they don't need to be physic to know when you want to bang em it's always ... *rimshot* |
| 20:52.00 | mishehu | anthm: bah on you! |
| 20:52.07 | mishehu | have to be technical |
| 20:55.20 | mutilator | time to go home! |
| 20:55.26 | teddyc | has anybody ran asterisk on a poweredge 2850.. zttest gives me -200.00000% ive turned off usb, both nics, framebuffer, acpi but still no luck |
| 20:55.30 | mutilator | adios all |
| 20:56.20 | lathos42 | mutilator: Later.. and go see Serenity this weekend |
| 20:56.31 | lathos42 | ITS GOOD FOR YOU |
| 20:57.31 | *** part/#asterisk mkrufky (n=mk@68.160.103.77) |
| 20:57.42 | shyru | :s |
| 20:58.20 | Beirdo | Serenity now! |
| 20:59.58 | *** join/#asterisk RickTick (n=rpulido_@c-67-191-89-108.hsd1.fl.comcast.net) |
| 21:00.08 | lathos42 | Ok, time for me to go home too |
| 21:00.10 | lathos42 | byebye! |
| 21:00.28 | generalhan | anyone in here use ELI for T-1s ? |
| 21:01.13 | azzie | ELI ? |
| 21:01.42 | RickTick | hello all: I have an attached an fxo port to a remote device ...how do I get * to dial a telephone ... thru that port? |
| 21:01.48 | generalhan | Electric LightWave |
| 21:03.25 | hardwire | just juggled 5 inbound calls |
| 21:03.31 | hardwire | she is amazed |
| 21:03.32 | Beirdo | doing the receptionist? |
| 21:03.34 | hardwire | she is also senile. |
| 21:03.36 | Beirdo | naughty |
| 21:03.39 | hardwire | yes |
| 21:03.44 | generalhan | hardwire: is that funny |
| 21:03.44 | generalhan | its the same way with our receptionist |
| 21:03.52 | hardwire | generalhan: I hate it |
| 21:03.55 | generalhan | 3 calls come in and she loses her head and starts crying ! LOL |
| 21:03.56 | hardwire | she is dense when it comes to this |
| 21:04.04 | hardwire | she hates me for getting 23 inbound channels |
| 21:04.15 | hardwire | but I have it set up to ring other phones if she is busy |
| 21:04.16 | generalhan | i walk up and put 8 people on hold and transfer them all without trouble |
| 21:04.16 | hardwire | and |
| 21:04.18 | simbulu | Compiling asterisk it seems mpg123 should be installed. www.mpg123.de says it is unmaintained and contains security problems... What should I do? |
| 21:04.20 | hardwire | all of them were at lunch |
| 21:04.21 | hardwire | grr |
| 21:04.32 | hardwire | generalhan: yeh.. I need a sexy smart receptionist |
| 21:04.39 | hardwire | vs this marble shaped goofball we have |
| 21:04.50 | hardwire | sex and smart go hand in hand |
| 21:04.53 | Beirdo | hardwire: problem with that is then you'd get no work done |
| 21:04.56 | hardwire | or.. make a nother body part in hand reference |
| 21:05.07 | hardwire | Beirdo: I am on the 4th floor |
| 21:05.14 | hardwire | the second floor receptionist is a hottie |
| 21:05.18 | hardwire | but she isn't smart |
| 21:05.26 | hardwire | so we are hoping to make her smart |
| 21:05.38 | MRH2 | sounds like my type hardwire |
| 21:05.49 | hardwire | here.. watch.. hit check.. tell them you are putting them on hold.. hit hold.. hit check.. tell them you are putt... |
| 21:05.51 | hardwire | its not that hard |
| 21:06.01 | hardwire | I watch the damn logs |
| 21:06.02 | hardwire | its funny |
| 21:06.11 | hardwire | whats even funnier is the snoms have syslog support |
| 21:06.23 | hardwire | so I watch the syslog output of log level 9.. which tells me what buttons they are pressing |
| 21:06.27 | hardwire | so I sit there and watch |
| 21:06.32 | hardwire | pop some popcorn and have a good laugh |
| 21:06.33 | hardwire | its amazing |
| 21:06.45 | hardwire | I need to put "Don't Panic" as the idle screen |
| 21:07.23 | hardwire | how sad |
| 21:09.25 | MRH2 | hardwire 4 inbound I playback a greeting then stick them in a queue |
| 21:09.42 | MRH2 | saves on answer hold answer hold etc |
| 21:09.51 | hardwire | 10 seconds to head recptionist |
| 21:09.53 | hardwire | then to the queue |
| 21:10.28 | MRH2 | is that the hot one? |
| 21:10.50 | *** join/#asterisk malcolmd (n=malcolmd@pdpc/sponsor/digium/malcolmd) |
| 21:13.16 | jarrod | hey |
| 21:13.30 | *** join/#asterisk tessier (n=treed@wsip-68-15-4-13.sd.sd.cox.net) |
| 21:13.41 | jarrod | since upgrading asterisk MGCP is giving me these BEEPS in the middle of my conversation |
| 21:13.47 | jarrod | what could be causing that |
| 21:15.25 | hardwire | but I still get reports that the internet is down when a server in netherland dies |
| 21:15.29 | hardwire | even though they can access google |
| 21:15.58 | hardwire | jarrod: you enabled monitoring |
| 21:16.00 | hardwire | ? |
| 21:16.39 | jarrod | yes im debugging |
| 21:16.52 | jarrod | it seems also that asterisk sends a lot of unnecessary MGCP signals |
| 21:17.02 | jarrod | a lot of RQNT |
| 21:17.19 | hardwire | see |
| 21:17.19 | *** join/#asterisk abcd100 (n=abcd100@61.16.172.254) |
| 21:17.28 | hardwire | I just got a report that our phone system isn't working because nobody answered the phone |
| 21:17.29 | hardwire | hah |
| 21:17.39 | hardwire | I can hear all the phones ringing.. nobody is around to pick them up |
| 21:17.48 | jarrod | are you integrating the system into a legacy phone system? |
| 21:17.59 | hardwire | no |
| 21:19.46 | *** join/#asterisk BBRodrigueZ (n=john@p54B01A7D.dip0.t-ipconnect.de) |
| 21:20.35 | ManxPower | ~docs |
| 21:20.37 | jbot | [docs] Documentation can be found at http://www.digium.com/index.php?menu=documentation or http://www.digium.com/handbook-draft.pdf or http://www.voip-info.org/wiki-Asterisk or http://www.asteriskdocs.org or http://www.oreilly.com/catalog/asterisk |
| 21:20.37 | ManxPower | ~mailinglist |
| 21:20.39 | jbot | [mailinglist] Search Asterisk mailing lists by prepending site:lists.digium.com to your Google search. Browse the mailing list archive at http://lists.digium.com/ |
| 21:23.25 | *** join/#asterisk lavilahsilva (n=Odysseus@bl4-142-89.dsl.telepac.pt) |
| 21:23.44 | jarrod | is anyone here integrating a legacy phone system with asterisk using MGCP on a device like adtran or carrier access |
| 21:23.44 | jarrod | ? |
| 21:23.52 | ManxPower | hardwire, Did you go back to the person and say "It's not a phone problem, it's a human resources problem!"? |
| 21:24.03 | hardwire | heh |
| 21:24.21 | *** join/#asterisk abcd100 (n=abcd100@61.16.172.254) |
| 21:24.24 | hardwire | damnit |
| 21:24.28 | hardwire | app_queue is acting up again |
| 21:24.44 | *** part/#asterisk BBRodrigueZ (n=john@p54B01A7D.dip0.t-ipconnect.de) |
| 21:25.16 | *** join/#asterisk Veto_laptop (i=mdkuser@cpe-66-69-38-192.satx.res.rr.com) |
| 21:25.19 | hardwire | now its not ringing dynamic members |
| 21:25.23 | hardwire | poor |
| 21:25.40 | lavilahsilva | hi, does anyone tried remote provisioning on a digium iaxy? |
| 21:26.13 | hardwire | Hi Shane! |
| 21:26.13 | hardwire | Unfortunately I am merely the IP Goddess and not the Peering Goddess. I have forwarded your |
| 21:26.13 | hardwire | email to our support team. |
| 21:26.14 | hardwire | Guys - |
| 21:26.14 | hardwire | Can you help Shane out, please? |
| 21:26.15 | hardwire | Thank you! |
| 21:26.17 | hardwire | TWTC IP Analyst |
| 21:26.19 | hardwire | yay for twtelecom |
| 21:26.36 | *** join/#asterisk SpaceBass (n=SpaceBas@c-24-125-184-203.hsd1.va.comcast.net) |
| 21:26.40 | hardwire | SpaceBass: ! |
| 21:26.43 | hardwire | long time no bass! |
| 21:26.44 | SpaceBass | hey folks |
| 21:26.51 | SpaceBass | tell me about it! |
| 21:27.06 | SpaceBass | i am actually swamped with my real job lately :( |
| 21:27.06 | hardwire | whats been going down maaaaan! |
| 21:27.31 | SpaceBass | travel and more travel |
| 21:27.41 | *** join/#asterisk zx225 (n=me@65.183.42.5) |
| 21:28.14 | jarrod | whos this zx225 guy |
| 21:28.19 | jayk- | whenever i transfer a caller, i am getting a Zombie message on the asterisk console. the call is transferred, but hthe caller never hears any ringing |
| 21:28.21 | SpaceBass | trying to call my BroadVoice account and have it forward to my blueface (irish voip) account... looks like its failing on "attemping native bridge..." |
| 21:28.33 | jayk- | anybody know why i might be getting the zombie and no ringing for the caller? |
| 21:29.16 | SpaceBass | does BV not permit native bridges or something |
| 21:29.28 | jarrod | ive seen zombie messages related to music on hold when transfering calls |
| 21:29.53 | clint_ | Anyone know how to cause asterisk to emit that really loud off-hook warning tone on a zap channel? |
| 21:30.08 | teddyc | you need a howler |
| 21:30.57 | clint_ | I've got four of those, and they're furry and eat a lot. But how are they going to help me get asterisk to make the phone buzz? |
| 21:31.08 | SpaceBass | native bridge not working...anyone? |
| 21:31.30 | ManxPower | SpaceBass, not the same codec? Using T/t on Dial? |
| 21:31.44 | SpaceBass | clint_: like what, if someone leaves a phone off the hook... ? |
| 21:31.48 | ManxPower | jayk-, using older version of Asterisk? |
| 21:31.58 | jayk- | ManxPower: i tried 1.2.0-beta and cvs-head |
| 21:32.00 | jayk- | same problem |
| 21:32.11 | jayk- | <PROTECTED> |
| 21:32.12 | jayk- | <PROTECTED> |
| 21:32.12 | jayk- | <PROTECTED> |
| 21:32.12 | jayk- | <PROTECTED> |
| 21:32.12 | jayk- | <PROTECTED> |
| 21:32.15 | rayvd | hey hardwire, who'd you email at TW for that? |
| 21:32.16 | SpaceBass | ManxPower: not using either... very simple dial ... s,1,Dial(sip/blueface/<number>) |
| 21:32.16 | jayk- | that's the message i get from the console |
| 21:32.22 | clint_ | SpaceBass: Yes, the really loud "hey, It's me the phone, remember?" tone... |
| 21:32.27 | hardwire | rayvd: I did a whois on the peers ip |
| 21:32.29 | hardwire | and it told me |
| 21:32.32 | rayvd | oh haha |
| 21:32.44 | SpaceBass | clint_: would think that might have to be built into the phone... but not sure |
| 21:32.48 | rayvd | quick response! |
| 21:33.36 | ManxPower | SpaceBass, do a "sip show channels" when the call is up so you can see what codecs each leg is using |
| 21:33.50 | clint_ | SpaceBass: Looking for how to tell a zaptel channel to do it.... Gotta be a way to tell it to play a ridiculously loud tone... |
| 21:34.13 | hardwire | rayvd: really surprising actually |
| 21:34.25 | ManxPower | clint_, it's called "howler, I think" |
| 21:35.08 | SpaceBass | ManxPower: assuming they are different (probably the case) is there a way to auto determine and convert |
| 21:35.17 | ManxPower | no, force it to use the same codec |
| 21:35.18 | rayvd | and a silly yet useful response too |
| 21:35.19 | hardwire | I need theVoice |
| 21:35.23 | hardwire | lickity split |
| 21:35.32 | hardwire | people are hanging up at the IVR |
| 21:35.39 | hardwire | because they don't know who they contacted :) |
| 21:35.59 | rayvd | they just want to call you FRIEND :( :( |
| 21:36.04 | rayvd | that is all time warner employees seek |
| 21:36.05 | rayvd | kinship |
| 21:36.06 | hardwire | actually I would love to have a fancy sound byte for "T.D.X." and "B.S.E." like AT&T has |
| 21:36.21 | hardwire | where they say "AT&T" all pretty like |
| 21:36.26 | *** join/#asterisk J[SS] (n=jeremy@smartserv/ceo/chaoscon) |
| 21:36.28 | hardwire | with fancy sound stuff |
| 21:36.36 | hardwire | I should record it and play with my voice |
| 21:37.23 | *** part/#asterisk TimAAAAA (n=TimA@CPE00062567e9e1-CM0011ae90e1e2.cpe.net.cable.rogers.com) |
| 21:39.12 | *** join/#asterisk chiardon (n=chiardon@200.71.58.39) |
| 21:39.56 | chiardon | Hello... |
| 21:41.08 | hardwire | I really don't have a pretty voice |
| 21:41.15 | lavilahsilva | hehehe |
| 21:41.36 | hardwire | who has some hot vocals here? |
| 21:41.43 | hardwire | I will give you a 1-800 you can call to record our prompts :) |
| 21:41.45 | *** join/#asterisk drumkilla_laptop (n=russell@asterisk/developer-and-stable-maintainer/drumkilla) |
| 21:41.45 | *** mode/#asterisk [+o drumkilla_laptop] by ChanServ |
| 21:42.40 | rayvd | only if we can incorporate the word 'chigger' at will! |
| 21:42.52 | SpaceBass | lol |
| 21:43.34 | hardwire | heh |
| 21:44.29 | hardwire | I got a responce from twtelecoms peering support |
| 21:44.33 | hardwire | saying they are working on it |
| 21:44.33 | hardwire | yay |
| 21:50.42 | rayvd | dang, i am just going to try emailing the whois address for the router stripping tos |
| 21:50.47 | rayvd | figured it would be an impossible task :) |
| 21:51.40 | hardwire | http://hegel.research.att.com/tts/speech/240fb239a6f50e7d4ef5ba639ef9b81c.wav |
| 21:51.43 | hardwire | thats pretty wicked |
| 21:52.29 | hardwire | http://hegel.research.att.com/tts/speech/7d734de7a6cecf9a132a61be39281ab4.wav |
| 21:52.41 | hardwire | not to be completely stereotypical :) |
| 21:53.43 | clint_ | Here's a stupid question.... (maybe) can playtones not handle more than two tones at a time? eg. 1+2+3+4/500 ? |
| 21:53.49 | *** part/#asterisk abcd100 (n=abcd100@61.16.172.254) |
| 21:54.06 | clint_ | Seems that once I put in a third tone, the first tone sticks on indefinitely, and that's it... |
| 21:54.08 | Qwell | clint_: no |
| 21:54.13 | Qwell | just 2 |
| 21:54.36 | clint_ | Was trying to simulate the howler tone (seems that 1400+2060+2450+2600 is right) and no luck... |
| 21:57.20 | clint_ | Ahh well, howler = 1400+2060/100,0/100 will have to do. |
| 21:57.43 | clint_ | Is the two tone limit a bug or a feature? |
| 21:58.25 | clint_ | (that is to say, was that design decision made on purpose, and if so, why doesn't it barf on more than two, rather than play them forever?) |
| 22:02.09 | *** join/#asterisk casio_ (i=jjhhjkh@200-126-69-190.bk5-dsl.surnet.cl) |
| 22:03.23 | rayvd | i emailed probably the same address you did hardwire, asked for ip goddess, wonder if she'll make the connection |
| 22:03.30 | rayvd | probably soemone totally different will read the email and just be puzzled |
| 22:03.44 | hardwire | she is responsive :) |
| 22:04.59 | rayvd | automated response! |
| 22:05.08 | *** join/#asterisk cio (n=na@adsl-072-149-159-016.sip.bhm.bellsouth.net) |
| 22:05.10 | cio | Greets, all. |
| 22:05.39 | hardwire | rayvd: that one is |
| 22:05.44 | hardwire | she actually responded 30 minutes later |
| 22:07.02 | hardwire | naturalvoice is pissing me off |
| 22:10.26 | *** join/#asterisk jalsot (n=tamas@abacus.eworldcom.hu) |
| 22:11.49 | rayvd | i declare jalsot a hero! |
| 22:12.06 | hardwire | ok |
| 22:12.10 | hardwire | sox w/ resample -ql |
| 22:12.13 | hardwire | is my new favorite thing |
| 22:17.24 | *** join/#asterisk peggerrr (i=pegasus@lain.ziaspace.com) |
| 22:18.14 | *** join/#asterisk adelas (n=booger@rrcs-24-199-21-141.west.biz.rr.com) |
| 22:24.33 | *** join/#asterisk dalabera (n=Dalabera@pmr.pmrtechnologies.com) |
| 22:29.35 | *** join/#asterisk hellagony (n=egutierr@tvn95-3-82-237-157-188.fbx.proxad.net) |
| 22:33.15 | zeckill | hi all... |
| 22:33.48 | zeckill | maybe I should ask how to get the billsec of a bridged call? that is... to get the billsec after a successful (and call picked up) Dial() |
| 22:34.45 | file | that question makes me scratch my head |
| 22:35.41 | zeckill | file: am I asking the question in a wrong way or? |
| 22:39.41 | hardwire | http://www.jwz.org/images/hamster.jpg |
| 22:41.06 | MRH2 | i seem to be having an interesting scenario with parked calls being lost |
| 22:41.23 | MRH2 | call to agent number -> agent parks call -> agent receives another call -> parked call timeout -> call is lost |
| 22:41.27 | hardwire | MRH2: I may have a solution |
| 22:41.41 | hardwire | you don't have call waiting on your agents phone |
| 22:41.45 | iDunno | don't park the call for more than 45 seconds ;) |
| 22:41.58 | hardwire | introduce said agent to the term "hold please" |
| 22:42.03 | iDunno | or, have the timeout redirect the call. |
| 22:42.10 | MRH2 | unfortuantely the agent channel gets flagged as busy |
| 22:42.19 | hardwire | MRH2: yeh. |
| 22:42.22 | hardwire | thats a bummer eh? |
| 22:42.27 | MRH2 | wish i could stop that |
| 22:42.32 | hardwire | I can see how that happens |
| 22:42.45 | hardwire | but I think what you need to do is as IDunno said.. make it timeout to an operator |
| 22:42.57 | hardwire | therefore it isn't lost |
| 22:42.58 | hardwire | or |
| 22:43.02 | hardwire | park the call for a longer time |
| 22:43.08 | hardwire | change it to like.. 500 minutes |
| 22:43.17 | hardwire | I type like this because I suck |
| 22:43.18 | iDunno | set the parking timeout higher, yeah, that'd make sense... |
| 22:43.27 | iDunno | though, then you'd forget it was there... |
| 22:43.32 | MRH2 | then it will likely get lost for another reason lol |
| 22:43.37 | iDunno | :) |
| 22:43.39 | hardwire | iDunno: not like it would matter.. it timeouts and hangs up anyways :) |
| 22:44.01 | iDunno | *grin* |
| 22:44.09 | hardwire | MRH2: what are you using agents for? |
| 22:44.22 | MRH2 | dynamic extensions |
| 22:44.32 | hardwire | ok |
| 22:44.51 | hardwire | when the call is parked |
| 22:44.56 | hardwire | it tries to do what now? |
| 22:45.03 | hardwire | call back an agent right. |
| 22:45.13 | hardwire | I sort of thought if I put a caller on hold |
| 22:45.18 | hardwire | then dialed 700 |
| 22:45.19 | hardwire | waited |
| 22:45.20 | hardwire | transferred |
| 22:45.24 | hardwire | it would recall the SIP |
| 22:45.26 | hardwire | not the AGENT |
| 22:45.39 | hardwire | so maybe you should find a better way to map the extensions |
| 22:45.43 | hardwire | for instance |
| 22:45.54 | hardwire | instead of exten 1000,1,Agent(stuff) |
| 22:45.57 | hardwire | make it see if its a parked call |
| 22:46.04 | hardwire | and make it go to Sip(stuff) |
| 22:46.15 | hardwire | therefore it doesn't Suck(stuff) |
| 22:47.02 | hardwire | cause what I am guessing is if agent 1000 is at sip 1100 |
| 22:47.04 | hardwire | you park the call |
| 22:47.07 | MRH2 | wish there was a variable that lets me get what sip extension an agent was logged in atgiven an agent number (with callbacklogin) |
| 22:47.09 | hardwire | it tries to dial 1100 |
| 22:47.22 | hardwire | which then sees the agent 1100 (not 1000) as busy |
| 22:47.41 | hardwire | I may be 100% wrong |
| 22:47.45 | hardwire | in which case I need a soda |
| 22:47.45 | hardwire | bbl |
| 22:47.54 | MRH2 | lol |
| 22:48.57 | MRH2 | then instead of dial agent/blah i could have dial/sip $sipagent_blah |
| 22:50.10 | MRH2 | which would allow me to have call waiting as well |
| 22:50.41 | *** join/#asterisk sgorilla (n=fdasfdas@cpe-24-160-116-130.houston.res.rr.com) |
| 22:51.53 | hardwire | MRH2: lemme see your dialplan on pastebin.ca |
| 22:52.00 | hardwire | cause I bet you are just as goofy as I expect |
| 22:52.05 | hardwire | http://www.jwz.org/images/hamster.jpg |
| 22:52.09 | hardwire | you have to see this as well |
| 22:52.12 | hardwire | it makes your day better |
| 22:52.43 | MRH2 | door closed, blinds closed, opening link |
| 22:53.45 | hardwire | heh |
| 22:53.51 | hardwire | it has hamster in it |
| 22:53.59 | MRH2 | lol that is just fun for the whole family |
| 22:54.02 | hardwire | what would you ever think I would send you that requires that kind of privacy |
| 22:54.11 | hardwire | hamster porn? |
| 22:55.36 | MRH2 | ....letting the silence go on a bit |
| 22:55.43 | hardwire | I repeat |
| 22:55.46 | hardwire | HAMSTER PORN! |
| 22:55.47 | MRH2 | ...no course not |
| 22:58.51 | peggerrr | what does this mean Invalid extension '6', but no rule 'i' in context 'index' , i think i kind of understna dwhat it means, i dialed a six but there is no extension 6 but i do have extesion 600 how do i make it so that 600 works? |
| 23:00.02 | jarrod | hey what is DTMF clipping during ongoing calls mean |
| 23:00.05 | *** join/#asterisk nagl (n=nagl@213.235.241.6) |
| 23:01.04 | zx225 | r u using mgcp |
| 23:01.12 | jarrod | yes |
| 23:01.15 | jarrod | its in the mgcp code |
| 23:01.28 | zx225 | that might be a bug with mgcp |
| 23:01.37 | *** join/#asterisk _tekati_ (n=captain@cpe-66-75-215-63.bak.res.rr.com) |
| 23:01.37 | jarrod | its looking like it more and more |
| 23:01.41 | peggerrr | ??? |
| 23:01.55 | *** join/#asterisk Ethon (i=arne@Oldman.steinkamm.com) |
| 23:02.07 | rayvd | page: dial 600? :) |
| 23:02.36 | zx225 | i don't know of any good mgcp support people |
| 23:02.48 | rayvd | haha, hey hardwire, she replied |
| 23:02.51 | rayvd | her name is stacy how cute |
| 23:03.27 | peggerrr | rayvd you know what the error message means |
| 23:03.57 | rayvd | yes |
| 23:04.02 | peggerrr | what |
| 23:04.03 | rayvd | since extension 6 doesn't exist |
| 23:04.07 | rayvd | it looks for the "invalid" extension handler |
| 23:04.08 | rayvd | which is i |
| 23:04.10 | peggerrr | i get that part |
| 23:04.11 | rayvd | which you don't have defined either |
| 23:04.27 | peggerrr | well how do i get it to wait long enought to put 600 in |
| 23:04.47 | rayvd | get what to wait? your ata? |
| 23:05.20 | peggerrr | no asteriski have extension 600 but no extension 6 |
| 23:05.36 | rayvd | ok so what are you dialing on? |
| 23:05.42 | rayvd | phone going to ata going to asterisk? |
| 23:05.49 | rayvd | or ip phone going directly to asterisk? |
| 23:06.03 | rayvd | if you're dialing 600 on the phone and asterisk is only seeing 6, then your ata is sending the dial string too soon |
| 23:06.35 | peggerrr | well dialed a did and asterisk picked up, and then i sent th edid to a indes context , let me paste the esxtesnions.conf |
| 23:07.00 | rayvd | i hope it's realaaallly long ;) |
| 23:07.13 | peggerrr | not very |
| 23:08.42 | peggerrr | check it out http://pastebin.com/379181 |
| 23:11.26 | rayvd | make a NoOp to display the contents of ${EXTEN} perhaps |
| 23:11.36 | rayvd | see if it's 6 or 600 |
| 23:12.30 | peggerrr | where right after response timeout? |
| 23:14.18 | rayvd | eh, put it first |
| 23:14.46 | peggerrr | what right after default |
| 23:15.00 | *** join/#asterisk jeffgus (n=jeffgus@2002:d856:c704:0:0:0:0:1) |
| 23:15.07 | rayvd | make it first in the index context |
| 23:15.11 | peggerrr | ok |
| 23:15.16 | rayvd | exten => s,1,NoOp,${EXTEN} |
| 23:16.19 | *** join/#asterisk dalfry (n=dalfry@gateway.ishisystems.com) |
| 23:16.41 | hardwire | rayvd: soooooo |
| 23:16.44 | hardwire | what did Stacy say? |
| 23:17.04 | peggerrr | this is the error that i got http://pastebin.com/379193 |
| 23:17.25 | peggerrr | dam that is the dame as before |
| 23:17.28 | peggerrr | err |
| 23:17.50 | rayvd | Hi Ray - |
| 23:17.50 | rayvd | You have that right! :) |
| 23:17.56 | rayvd | I have forwarded your email to our guys in Support. They should be more able to help you. |
| 23:18.07 | peggerrr | http://pastebin.com/379194 |
| 23:18.14 | *** join/#asterisk syle (n=blag@unaffiliated/syle) |
| 23:18.37 | rayvd | did the NoOp work? |
| 23:18.49 | rayvd | I didn't think you had to put NoOp's arguments in parentheses |
| 23:19.07 | rayvd | thought it was NoOp,${EXTEN} to display exten variable |
| 23:19.12 | peggerrr | no i still get the same Invalid extension '6', but no rule 'i' in context 'index' |
| 23:19.46 | peggerrr | well exten => 16178303190,2,NoOp(${CALLERID}) |
| 23:19.52 | peggerrr | works for displaying the caller id |
| 23:19.53 | *** join/#asterisk shido6 (n=shido@d221-68-210.commercial.cgocable.net) |
| 23:19.53 | rayvd | k, make NoOp display the output of $EXTEN |
| 23:19.58 | rayvd | ah |
| 23:20.09 | rayvd | well i'm curious what's in EXTEN, it seems to be 6 and no 600. just wanted to verify that. |
| 23:20.23 | rayvd | you could also make a macro and call the macro from your default context |
| 23:20.30 | rayvd | then use ARG1, ARG2, etc |
| 23:20.41 | peggerrr | well i have exten => s,1,NoOp(${EXTEN}) is that not correct |
| 23:20.51 | syle | no |
| 23:20.58 | peggerrr | ?? |
| 23:21.13 | syle | <PROTECTED> |
| 23:23.08 | peggerrr | exten => s,1,NoOp,${EXTEN} is not working much better, smae error |
| 23:24.10 | rayvd | but you do see the NoOp line being executed in your asterisk console? |
| 23:24.33 | *** join/#asterisk RoyK (n=roy@55.80-202-161.nextgentel.com) |
| 23:25.07 | syle | nothing wrong with your line |
| 23:25.10 | syle | its something else |
| 23:25.34 | peggerrr | yes actullly -- Executing NoOp("IAX2/5245633032@5245633032/2", "s") in new stack |
| 23:26.29 | peggerrr | but tha tis not giving any usefull info |
| 23:27.11 | *** join/#asterisk gambolputty (n=gambolpu@72.240.241.108) |
| 23:27.12 | rayvd | or is it? |
| 23:27.16 | rayvd | it says extension is 2 |
| 23:27.25 | rayvd | did you dial 200 though? |
| 23:27.41 | rayvd | or maybe i'm misreading that |
| 23:27.45 | rayvd | guess it just shows extension s |
| 23:29.10 | peggerrr | nope i am not pressing 3 not sure what that number is from |
| 23:31.04 | *** join/#asterisk Johnsie (n=john@acs-24-154-53-217.zoominternet.net) |
| 23:34.28 | rayvd | dunno pegg... maybe set DigitTimeout to a higher value? |
| 23:37.08 | *** join/#asterisk Navman (n=a@62.108.206.82) |
| 23:42.36 | xheliox | NOTICE[25318]: sched.c:296 ast_sched_del: Attempted to delete nonexistent schedule entry 2! -- I get this every few seconds on my asterisk console, no matter what's going on.. |
| 23:42.52 | xheliox | Any idea what it is? |
| 23:43.43 | *** join/#asterisk sgorilla (n=fdasfdas@cpe-24-160-116-130.houston.res.rr.com) |
| 23:45.06 | *** part/#asterisk Navman (n=a@62.108.206.82) |
| 23:48.06 | peggerr | why would asterisk not let me enter more then one digit |
| 23:50.37 | *** join/#asterisk wolfson (n=hehe@usr-kdh-208-6-58-26.beachlink.com) |
| 23:51.43 | peggerr | i want to enter 600 but when i enter 6 it just hangs up on me |
| 23:51.52 | kFuQ | # AGI Script that reads back e-mail from an IMAP account. |
| 23:51.52 | kFuQ | http://www.oldskoolphreak.com/tfiles/voip/tts-imap.agi |
| 23:54.15 | peggerr | ??? |
| 23:54.16 | rayvd | have you tried setting DigitTimeout to like 10 or something? |
| 23:54.24 | rayvd | peggerr? |
| 23:54.31 | peggerr | no i have not |
| 23:54.32 | MRH2 | what is all that stuff after a channel like SIP/1012-ce77 what is the -ce77 |
| 23:54.44 | peggerr | only responsetimeout |
| 23:55.02 | *** join/#asterisk opus__ (n=opus@dahphish.org) |
| 23:55.04 | opus__ | hello |
| 23:55.06 | rayvd | dunno what the default timeout is, but setting DigitTimeout to some arbitrary value may help |
| 23:55.21 | opus__ | anyone here have an asterisk PBX setup that with an external IP I can test real quick |
| 23:55.38 | *** join/#asterisk jskcr (n=jskcr@unaffiliated/jskcr) |
| 23:55.39 | Qwell | opus__: SIP/guest@24.50.66.194/s |
| 23:56.11 | jskcr | hy all |
| 23:57.12 | *** join/#asterisk krisguy (n=krisguy@h216-170-039-057.adsl.navix.net) |
| 23:57.25 | peggerr | i have DigitTimeout(5) but i still get Invalid extension '6', but no rule 'i' in context 'index' |
| 23:57.56 | fordvoice | Question How do you make the DTMF stop from passing double digits in rfc2833 |
| 23:58.03 | rayvd | hmm |
| 23:58.25 | jskcr | skdjworkjiwrjadnsfpa |
| 23:58.41 | Qwell | on fordvoice's question, not all digits are being duplicated...its kinda random |
| 23:58.47 | peggerr | rayvd what do you think? |
| 23:58.47 | fordvoice | Astcc is passing double digits from a pots line but on a local Inet line works fine |
