irclog2html for #asterisk on 20051009

`00:00.16`	`SarahEmm`	`hihi`
`00:00.33`	`dan__t`	`herro.`
`00:00.33`	`[hC]`	`I have two * boxes, one acting as the point for SIP connectivity, and another acting as my 'switch' - it has the PRI connected to it and acts as the master dial plan. when I place a call, and it comes back 'busy' from the PRI, and I execute Busy() - All it does is send back busy to the first * box (via IAX)`
`00:00.39`	`*** join/#asterisk KaBewM (n=kabewm@66-215-7-106.dhcp.psdn.ca.charter.com)`
`00:00.40`	`[hC]`	`at which point I have to call busy AGAIN from the first box`
`00:00.50`	`[hC]`	`is this normal, or should the switch actually play busy tones?`
`00:01.08`	`[hC]`	`I mean, both make sense for different reasons. :)`
`00:01.26`	`[hC]`	`Its no problem, I deal with it accordingly, Im just curious what other people do.`
`00:03.01`	`[hC]`	`PS. Who's stoked for astricon!?! :)`
`00:03.17`	`SarahEmm`	`heh`
`00:03.20`	`SarahEmm`	`i wish i could go :)`
`00:03.28`	`SarahEmm`	`and as for the former question, i'm not sure. i have a simple one-box * setup`
`00:03.55`	`[hC]`	`Yeah, most people do.. tis okay`
`00:04.04`	`[hC]`	`I debated going or not, and decided i should in the end`
`00:04.10`	`KaBewM`	`hey SarahEmm, fyi there seems to have been a regime change at sixTel. Their support is now superb`
`00:04.14`	`[hC]`	`Flying from florida though, made it a bit expensive.`
`00:04.34`	`SarahEmm`	`ahh KaBewM`
`00:04.34`	`dan__t`	`where's it being held?`
`00:04.38`	`SarahEmm`	`i'm happily with voctel :)`
`00:04.44`	`SarahEmm`	`sivana: speaking of which... callerid? ;)`
`00:05.03`	`sivana`	`I need to ask some ppl.. can you email for a reminder? :)`
`00:05.07`	`[hC]`	`dan__t: anaheim, CA`
`00:05.16`	`dan__t`	`ah.`
`00:05.16`	`count`	`mog_home: any luck?`
`00:05.22`	`mog_home`	`one sec i got side tracked`
`00:05.23`	`SarahEmm`	`sivana: 'k. address`
`00:05.25`	`SarahEmm`	`?`
`00:07.09`	`mog_home`	`set odbcstorage to the dsn name i think, and odbctable = name of table`
`00:07.12`	`mog_home`	`if i am not mistaken`
`00:07.34`	`mog_home`	`that will be tree fitty`
`00:07.35`	`count`	`ok`
`00:07.39`	`count`	`lemme try that`
`00:07.42`	`count`	`I'll dcc you a beer if it works`
`00:07.45`	`count`	`scouts honor`
`00:07.46`	`count`	`:P`
`00:10.42`	`Supaplex`	`beer.gif ;)`
`00:10.59`	`Supaplex`	`beware of fools bearing gifs!`
`00:10.59`	`mog_home`	`heh /me doesnt drink`
`00:11.04`	`count`	`beer.can!`
`00:11.06`	`count`	`or bottle`
`00:11.49`	`mog_home`	`i have to run out for a bit`
`00:11.51`	`mog_home`	`hope it works`
`00:12.43`	`count`	`oh no!`
`00:12.56`	`*** join/#asterisk NDT (n=me@cpe-24-195-219-245.nycap.res.rr.com)`
`00:13.12`	`count`	`nope`
`00:13.17`	`count`	`it's still going to the file on disk`
`00:16.36`	`NDT`	`Anyone in here good with radius/gnugk/aquagatekeeper? Msg me..pay you for some phone time...`
`00:18.32`	`*** join/#asterisk Chuji (i=Chuji@pcp09930052pcs.tulipgrove.tn.nash.comcast.net)`
`00:19.05`	`*** join/#asterisk GordonF (i=hixscrip@rrba-146-90-82.telkomadsl.co.za)`
`00:34.11`	`*** join/#asterisk bmg505 (n=leon@rndf-146-13-92.telkomadsl.co.za)`
`00:36.04`	`*** join/#asterisk blueone (n=blueone@62.240.35.202)`
`00:37.13`	`*** join/#asterisk halogen8 (n=halogen8@ip68-8-18-103.sd.sd.cox.net)`
`00:37.43`	`halogen8`	`is it possible to use a Intel 537 based modem as a FXO card for Asterisk?`
`00:38.18`	`KaBewM`	`sure`
`00:38.19`	`KaBewM`	`why not`
`00:38.37`	`Dr_Ray`	`buy the dev kit`
`00:38.53`	`Dr_Ray`	`the help from digium is worth the $$$`
`00:39.26`	`KaBewM`	`hehe last time i gave digium money I got screwed, stupid iaxy`
`00:39.27`	`Dr_Ray`	`er, wait, I'm biased`
`00:39.37`	`Dr_Ray`	`what happened?`
`00:39.42`	`halogen8`	`can you use any voice modem as an FXO port?`
`00:39.50`	`Dr_Ray`	`halogen - no`
`00:40.23`	`halogen8`	`Dr_Ray: can you use any voice modems as FXO cards?`
`00:41.04`	`KaBewM`	`Dr_Ray, i bought a iaxy. It didn't work right. I kept trying to get support from them and they told me to just mail the mailing list`
`00:41.08`	`KaBewM`	`which I had already done...`
`00:41.18`	`Dr_Ray`	`halogen - no, just the intel chipsets`
`00:41.19`	`KaBewM`	`actually I didnt just buy 1 iaxy, I bought ten`
`00:41.27`	`Dr_Ray`	`and none of them worked?`
`00:42.02`	`KaBewM`	`they ended up working ok, but it is severly lacking in features, security and everything`
`00:42.04`	`SarahEmm`	`just a very specific intel chipset rather`
`00:42.07`	`SarahEmm`	`a lot of intel chips don't work`
`00:42.21`	`KaBewM`	`but the documentation stank, it didnt say to use a bootp server to configure the ip. I only had a dhcp server`
`00:42.31`	`KaBewM`	`it specifically said that dhcp would work fine`
`00:42.35`	`halogen8`	`SarahEmm: do you know where i can find a list of the intel chips that will work?`
`00:43.02`	`halogen8`	`SarahEmm: will these modems work good? or would you just consider them for testing purposes only?`
`00:43.32`	`SarahEmm`	`MD3200 or Intel 837PU/PG`
`00:43.36`	`SarahEmm`	`any other chips won't work`
`00:43.39`	`SarahEmm`	`(EP, etc, don't work)`
`00:43.44`	`SarahEmm`	`halogen8: i'm not the person to ask.`
`00:43.49`	`SarahEmm`	`i use asterisk for mostly TTY, not voice.`
`00:44.33`	`KaBewM`	`TTY?`
`00:44.51`	`SarahEmm`	`text telephone.`
`00:44.57`	`halogen8`	`what about the Intel 537? I'm looking around....and it looks as if it may work....just wondering if anyone has tried it`
`00:45.00`	`KaBewM`	`oh`
`00:45.02`	`SarahEmm`	`to type to others over the phone lines instead of voice`
`00:45.03`	`halogen8`	`http://www.voip-info.org/tiki-index.php?page=X100P+clone`
`00:45.28`	`SarahEmm`	`err sorry halogen8, 537PU/PG not 837 :)`
`00:45.35`	`SarahEmm`	`the PU or PG works, other ones don't`
`00:45.58`	`SarahEmm`	`KaBewM: * has a good amount of TTY functionality in it too :)`
`00:46.06`	`SarahEmm`	`(tho i wouldn't be surprised if i was the only one using it)`
`00:46.28`	`Dr_Ray`	`tty as in services for the deaf, or tty as in teletype?`
`00:46.53`	`KaBewM`	`cool SarahEmm, never tried tty with it`
`00:47.06`	`SarahEmm`	`Dr_Ray: the former`
`00:47.14`	`KaBewM`	`i use it as a replacement for a home phone using my cable modem`
`00:47.17`	`Dr_Ray`	`very cool`
`00:47.21`	`SarahEmm`	`tho i'm also into old computing gear ;)`
`00:47.27`	`SarahEmm`	`i was talking about the former`
`00:47.37`	`Dr_Ray`	`I want a tty paper tape machine`
`00:48.11`	`KaBewM`	`i used an old trs-80 model 100 as a tty machine to get service faster from companies that would leave me on hold for hours`
`00:48.21`	`SarahEmm`	`Dr_Ray: err.. as in the latter? :)`
`00:48.44`	`SarahEmm`	`KaBewM: ...`
`00:48.50`	`Dr_Ray`	`yes, as in the latter`
`00:48.59`	`KaBewM`	`there was never any waiting for the deaf . ..`
`00:50.06`	`*** part/#asterisk cmantunes (n=cmantune@wsip-68-106-147-22.dc.dc.cox.net)`
`00:50.35`	`SarahEmm`	`KaBewM: want to bet?`
`00:50.55`	`SarahEmm`	`certainly the opposite of my experience.. heh.`
`00:51.28`	`KaBewM`	`weird. wel this was in 91 or so`
`00:51.39`	`KaBewM`	`i've not had a model 100 in years`
`00:51.53`	`Dr_Ray`	`the model 101 was awesome`
`00:52.27`	`KaBewM`	`i had the original`
`00:52.39`	`KaBewM`	`bought it at a flea market for ten bucks`
`00:53.02`	`Dr_Ray`	`A lot of reporters used them`
`00:53.02`	`SarahEmm`	`anyone know if you can turn off the dtmf sound when you dial on a polycom? replace it with just beeps or such?`
`00:53.43`	`*** join/#asterisk mcn_ (n=mcn@ext-gw.newtoncomputing.co.uk)`
`00:58.14`	`*** join/#asterisk ^X-works (n=r0x0r@host105-83.pool8261.interbusiness.it)`
`01:00.03`	`JerJer`	`Large hammer`
`01:00.27`	`SarahEmm`	`large hammer? huh?`
`01:00.49`	lancey`busy	`:)`
`01:01.06`	`JerJer`	`that would stop the dtmf sound, wouldn't it?`
`01:01.08`	`SarahEmm`	`lol`
`01:01.10`	`SarahEmm`	`yes it would`
`01:01.21`	lancey`busy	`hehehe :)`
`01:01.53`	`SarahEmm`	`not quite what i had in mind tho :)`
`01:02.47`	`*** join/#asterisk Derkommissar (n=Alberto@66.100.55.66)`
`01:11.16`	`pauldy`	`wonder if you could make a bandpass filter to just cut out the audio for the frequencies used in dtmf`
`01:11.37`	`SarahEmm`	`uhh`
`01:11.41`	`SarahEmm`	`that's a bit of overkill`
`01:11.45`	`SarahEmm`	`it was just 'cuz i prefer to not hear it`
`01:11.48`	`SarahEmm`	`not because it's a big issue`
`01:12.34`	`pauldy`	`I know but it could be useful to sell for privacy concerns`
`01:12.45`	`SarahEmm`	`ahh`
`01:12.48`	`pauldy`	`you know the people who wear aluminum foil hats`
`01:13.30`	`Dr_Ray`	`they are not hats, they are liners`
`01:13.45`	`Dr_Ray`	`way to perpetuate a stereotype`
`01:13.46`	`Dr_Ray`	`er`
`01:14.39`	`SarahEmm`	`hehe`
`01:15.27`	`pauldy`	`ok from now on I will phrase it as people with aluminum headwear`
`01:22.18`	`*** join/#asterisk gravemind (n=omgwtfbb@freenode/developer/GXTi)`
`01:29.27`	`*** join/#asterisk pr0m (n=pr0methe@lwhe2-237.2wcm.comporium.net)`
`01:32.22`	`*** join/#asterisk GXTi (n=omgwtfbb@freenode/developer/GXTi)`
`01:32.32`	`*** join/#asterisk coppice (n=chatzill@159.196.17.210.dyn.pacific.net.hk)`
`01:35.42`	`*** join/#asterisk alexhopper (n=a27386@CPE000103d29ae2-CM001225dfdfe0.cpe.net.cable.rogers.com)`
`01:37.53`	`*** join/#asterisk sd-tux (i=sd@2001:4ca0:0:fe00:0:0:a96:3f18)`
`01:42.01`	`Derkommissar`	`Has anyone attempted to run asterisk on OS X ?`
`01:43.23`	`file`	`Derkommissar: sure, you can`
`01:47.44`	`[dwC]`	`how do i make a ZAP channel answer my phone line after 20 seconds rather than after 1-2 seconds like it is default`
`01:48.22`	`*** join/#asterisk zotz (n=zotz@24.231.36.100)`
`01:48.57`	`Derkommissar`	`question is`
`01:49.05`	`Derkommissar`	`how succesfull was it ?`
`01:49.07`	`Derkommissar`	`hehe`
`01:49.13`	`Derkommissar`	`i just got an ibook`
`01:49.33`	`Derkommissar`	`im not sure if to leave OS X or to put debian on it`
`01:49.42`	`[dwC]`	`http://www.voip-info.org/tiki-index.php?page=MacOS+X`
`01:50.36`	`Derkommissar`	`Cool`
`01:50.42`	`[dwC]`	`sorry this was the one i meant to paste`
`01:50.43`	`[dwC]`	`http://www.voip-info.org/tiki-index.php?page=Asterisk%20MacOSX%20Support`
`01:51.03`	`Derkommissar`	`Cool`
`01:51.13`	`Derkommissar`	`Mac OS X looks sounds and works cool`
`01:51.37`	`*** join/#asterisk Niveous (n=mikes@pbx.niveous.ca)`
`01:51.44`	`Derkommissar`	`Cool`
`01:51.48`	`Derkommissar`	`so otherr people done it`
`01:52.29`	`[dwC]`	`i heard of a couple of people running os x native on a PC with asterisk running 100%`
`01:52.32`	`*** join/#asterisk maruz (n=maumar@host183-128.pool80104.interbusiness.it)`
`01:52.34`	`[dwC]`	`with pci support and all going`
`01:53.13`	`Derkommissar`	`i though OS X was not released for x86`
`01:53.18`	`[dwC]`	`heh`
`01:53.21`	`[dwC]`	`not officially`
`01:53.30`	`Derkommissar`	`its supposed to be in 2006`
`01:53.45`	`[dwC]`	`http://osx86project.org/`
`01:55.17`	`Derkommissar`	`Cool`
`01:55.46`	`Derkommissar`	`Dint know that`
`01:56.07`	`Derkommissar`	`i got to take my hat off, what people from mac have done with BSD its awsome`
`01:56.39`	`[dwC]`	`yeah well essentially when they move to intel x86 mac's will be PC's`
`01:56.54`	`marc324`	`what is the "./" in ./configure for?`
`01:57.15`	`[dwC]`	`you will be assimilated`
`01:57.20`	`[dwC]`	`resistance is futile`
`01:57.55`	`Derkommissar`	`LOL`
`01:58.10`	`Derkommissar`	`./ means execute the file`
`01:58.26`	`Derkommissar`	`when the file is not a /bin or /sbin directory`
`01:58.47`	`Derkommissar`	`so you compile a c program named doggy`
`01:58.54`	`SarahEmm`	`err`
`01:58.59`	`SarahEmm`	`./ just means 'current directory'`
`01:59.14`	`marc324`	`configure <enter> returns command not found`
`01:59.22`	`SarahEmm`	`./configure`
`01:59.44`	`Derkommissar`	`sarah you would not be able to run an executable`
`01:59.47`	`Derkommissar`	`in a directory`
`01:59.52`	`SarahEmm`	`what?`
`02:00.02`	`Derkommissar`	`if the path is not defined or its on a /bin directory`
`02:00.09`	`SarahEmm`	`i know this`
`02:00.10`	`Derkommissar`	`so you got to xpecify it with ./`
`02:00.12`	`SarahEmm`	`so you have to specify the path`
`02:00.15`	`SarahEmm`	`... i'm aware ;)`
`02:00.16`	`Derkommissar`	`correct`
`02:00.19`	`Derkommissar`	`correct`
`02:00.37`	`SarahEmm`	`all i was saying is that ./ doesn't mean 'execute' it means 'current dir' :)`
`02:00.38`	`SarahEmm`	`meow!`
`02:00.50`	`Derkommissar`	`if you add that directory to the /etc/profile`
`02:01.12`	`Derkommissar`	`it will work. by just typing it (Maybe) if it doesnt conflict with something else`
`02:01.35`	`Derkommissar`	`Sarah sorry im not completely fluent in english`
`02:01.41`	`marc324`	`GOTIT`
`02:01.43`	`Qwell`	`Are you saying to add . to /etc/profile?`
`02:01.45`	`Qwell`	`I hope not, heh`
`02:01.52`	`Derkommissar`	`No`
`02:01.54`	`Qwell`	`okay`
`02:01.58`	`SarahEmm`	`ahh okay Derkommissar :)`
`02:02.01`	`Qwell`	`. in PATH is a massive security vuln`
`02:02.02`	`Derkommissar`	`the directory where the configure script is at`
`02:02.02`	`SarahEmm`	`lol. that wouldn't be the best idea :)`
`02:02.12`	`Derkommissar`	`that would brake your system`
`02:02.15`	`Derkommissar`	`good test`
`02:02.17`	`Derkommissar`	`:-/`
`02:02.21`	`Derkommissar`	`what would it do`
`02:02.35`	`Derkommissar`	`you cant add . to your path`
`02:02.42`	`Derkommissar`	`even if you wanted to added`
`02:02.43`	`Qwell`	`You most certainly can`
`02:03.06`	`Derkommissar`	`it should be interesting`
`02:03.16`	`Qwell`	`its a big vulnerability`
`02:03.16`	`Derkommissar`	`i will get back to you guys when i try it on my pc`
`02:03.23`	`Derkommissar`	`to see what happens`
`02:03.26`	`SarahEmm`	`sure you can... you just Never Ever Ever should`
`02:03.28`	`SarahEmm`	`it'll work fine Derkommissar`
`02:03.33`	`SarahEmm`	`but it's a big security issue`
`02:03.41`	`Qwell`	`it won't "do anything", but if somebody drops a bad executable in /root/ or /var/tmp/ or whatever, it'll execute that first`
`02:03.42`	`Derkommissar`	`every user`
`02:03.52`	`SarahEmm`	`heh.. oooooold slacks used to default to having . in path, iirc....`
`02:03.52`	`Derkommissar`	`will be able to execute anything`
`02:03.56`	`Qwell`	`cp /home/Qwell/rootkit /root/ls`
`02:03.58`	`Qwell`	`SarahEmm: heh, silly`
`02:04.02`	`SarahEmm`	`yeah`
`02:04.04`	`Qwell`	`anyhow, bbl`
`02:04.06`	`Derkommissar`	`LOL`
`02:04.06`	`SarahEmm`	`this was in kernel 1.0 days or something`
`02:04.08`	`SarahEmm`	`ttyl qwell`
`02:04.14`	`Derkommissar`	`See ya'`
`02:04.53`	`Derkommissar`	`Sarah sorry if my terminology is not apropiate`
`02:04.54`	`Derkommissar`	`:-)`
`02:05.16`	`SarahEmm`	`it's oay :)\`
`02:05.18`	`SarahEmm`	`okay even`
`02:05.28`	`Derkommissar`	`LOL`
`02:05.31`	`Derkommissar`	`see ya later`
`02:05.54`	`Derkommissar`	`Sarah, should i stay or should i go!!`
`02:06.05`	`Derkommissar`	`i mean should i leave mac os x in my ibook`
`02:06.09`	`Derkommissar`	`or put debian on it ?`
`02:06.20`	`SarahEmm`	`dual boot`
`02:06.21`	`SarahEmm`	`s'what i do`
`02:06.33`	`Derkommissar`	`interesting`
`02:06.56`	`Derkommissar`	`i have been able to compile execute and run all linux program and tools`
`02:07.05`	`Derkommissar`	`so lets see if its nesesarry`
`02:07.21`	`Derkommissar`	`anyways see ya la8ter`
`02:07.38`	`Niveous`	`Can some help me out? I'm trying to setup voicemail on pstn line.. I want it to be able to ring 20 seconds then got asterisk system then voicemail.`
`02:08.24`	`Grubs`	`I am trying to debug why rxfax does nothing on my system. I'm using the \|debug switch and also strace yet nothing is printed in the cli when rxfax executes and I cant find any log files to use to find out why the fax file is never created. Any ideas?`
`02:10.27`	`coppice`	`Grubs: when you use the debug option rxfax produces a lot of information in the main asterisk log`
`02:13.17`	`Grubs`	`hi coppice. I have checked /var/log/asterisk/messages, /var/log/asterisk/event_log and there is nothing at all.`
`02:13.18`	`*** join/#asterisk wundaboy (n=asdf@c-67-164-107-68.hsd1.or.comcast.net)`
`02:14.35`	`Grubs`	`I am running in command line mode and can see the CLI and have verbose 6 and debugging 6 and no extra info is logged on-screen (same as messages log)`
`02:15.07`	`coppice`	`if you see nothing you are not running rxfax at all`
`02:16.04`	`Grubs`	`-- Executing RxFAX("Zap/1-1", "/var/spool/asterisk/incoming/1234.tif\|debug") in new stack`
`02:16.35`	`coppice`	`then there will be output from rxfax in the log`
`02:17.02`	`Grubs`	`but nothing further to say why the fax handshake fails (ie the sender never makes it to transmission stage)`
`02:17.33`	`coppice`	`you said you see nothing in the log. there will always be something if debug is on`
`02:17.45`	`Grubs`	`I have checked all thre log files that are in /var/log/asterisk and I dont know what other log files I can check`
`02:18.08`	`coppice`	`look at the console`
`02:19.36`	`Grubs`	`<PROTECTED>`
`02:19.53`	`Grubs`	`should be /var/log/asterisk/messages`
`02:20.51`	`Grubs`	`from using strace the next line after the " -- Executing RxFAX(..." is "user hung up"`
`02:21.27`	`Grubs`	`I am wondering if the rxfax compiled into the debian package maybe doesnt understand the \|debug switch and therefore does nothing.`
`02:22.32`	`Grubs`	`..I emailed the package maintainer to ask exactly that.`
`02:22.58`	`coppice`	`the debug switch was added some time ago`
`02:23.14`	`JamesDotCom`	`did you strace -f?`
`02:25.24`	`Grubs`	`I did not do the "-f" but am now`
`02:25.25`	`coppice`	`You should see something like this as the software starts, even if no communication occurs:`
`02:25.26`	`coppice`	`<PROTECTED>`
`02:25.28`	`coppice`	`<PROTECTED>`
`02:25.30`	`coppice`	`<PROTECTED>`
`02:25.31`	`coppice`	`Changed from phase 0 to 1`
`02:26.28`	`Grubs`	`All I see with verbosity 6 is:`
`02:26.46`	`Grubs`	`<PROTECTED>`
`02:26.47`	`Grubs`	`<PROTECTED>`
`02:26.47`	`Grubs`	`<PROTECTED>`
`02:26.47`	`Grubs`	`<PROTECTED>`
`02:26.47`	`Grubs`	`pbx*CLI>`
`02:27.47`	`coppice`	`which version of spandsp are you using?`
`02:29.04`	`Grubs`	`The debian package is "asterisk-app-fax (0.0.20050227-1)" which uses libspandsp0 (0.0.2pre17-1)`
`02:31.31`	`coppice`	`that is rather ancient. i think there should be something more up to date. the debian maintainer has been pretty keen on keeping things up to date`
`02:31.38`	`Grubs`	`the only non-stadard thing I have done is to recompile Zaptel from the latest source as the Debian Stable did not include the newer TDM400P zap drivers. May be this has broken the fax abilities?`
`02:33.20`	`coppice`	`the debug option started with pre18 :-(`
`02:33.29`	`Grubs`	`lol`
`02:34.17`	`Grubs`	`looks like I need to abandon debian stable and go for a more recent head build .... or try recompiling the whole caboose from the source myself.`
`02:34.45`	`Grubs`	`coppice - thankyou so much for your time. I appreciate the willingness of this channel to help others.`
`02:36.10`	`Grubs`	`actually - pre17 is the unstable version. my version is pre10-3 !!!!`
`02:36.28`	`Grubs`	`looks like I'll try a full source compilation.`
`02:38.27`	`*** join/#asterisk websae (i=websae@207-118-134-96.dyn.centurytel.net)`
`02:41.10`	`*** join/#asterisk juice (n=juice@mo-67-77-176-229.dyn.sprint-hsd.net)`
`02:41.55`	`marc324`	`what is meant by cvs-head sources?`
`02:48.43`	`Nugget`	`"cvs head" refers to the state of the asterisk codebase as it exists this very moment in time.`
`02:49.02`	`mog_home`	`the latest and greatest code`
`02:49.03`	`Nugget`	`it's the development branch which reflects each coder commit to the source code as it occurs`
`02:49.12`	`Nugget`	`it's the latest. quite possibly not the greatest.`
`02:49.20`	`websae`	`anyone here running ASTBILL?`
`02:49.21`	`Nugget`	`often it doesn't work at all.`
`02:49.27`	`Nugget`	`(well, sometimes)`
`02:50.42`	`mog_home`	`bah it very rarely "doesnt work" for me`
`02:51.22`	`Nugget`	`that may be, but it's still negligent to advocate cvs head for production systems, especially for end users who are unfamiliar with cvs and what that means.`
`02:53.06`	`mog_home`	`well true`
`03:05.51`	`Supaplex`	`nesides, cvs gets plenty of head. same some for later ... ;)`
`03:07.08`	`SarahEmm`	`:P`
`03:17.21`	`Dr_Ray`	`in production even`
`03:17.27`	`blitzrage`	`evening y'all`
`03:17.42`	`Dr_Ray`	`blitz - in LA yet?`
`03:19.15`	`blitzrage`	`Dr_Ray: yah`
`03:19.16`	`blitzrage`	`dinner!`
`03:20.09`	`*** join/#asterisk mut (i=WebChat@i.think.napoleon.dynamiteblows.com)`
`03:30.05`	`*** join/#asterisk popvoxdave (i=user@dave2.toad.net)`
`03:30.39`	`dan__t`	`what's up, kids.`
`03:31.00`	`*** part/#asterisk popvoxdave (i=user@dave2.toad.net)`
`03:31.39`	`dan__t`	`EXCELLENT.`
`03:33.13`	`Dr_Ray`	`I just ate my fortune from my cookie by mistake`
`03:33.22`	`*** join/#asterisk twisted (n=twisted@asterisk/friend-and-developer/pdpc.professional.twisted)`
`03:33.22`	`*** mode/#asterisk [+o twisted] by ChanServ`
`03:34.53`	`dan__t`	`haha.`
`03:35.35`	`*** join/#asterisk ubergoober (n=ubergoob@c-24-16-108-200.hsd1.wa.comcast.net)`
`03:39.31`	`dan__t`	`bummer.`
`03:41.30`	`*** join/#asterisk twisted (n=twisted@asterisk/friend-and-developer/pdpc.professional.twisted)`
`03:41.31`	`*** mode/#asterisk [+o twisted] by ChanServ`
`03:50.29`	`*** join/#asterisk bmg505 (n=leon@rndf-146-46-199.telkomadsl.co.za)`
`03:53.46`	`*** join/#asterisk \|cleric\| (n=dacleric@p548282D9.dip0.t-ipconnect.de)`
`03:53.48`	`twisted`	`mmmm`
`03:53.57`	`twisted`	`sinatra relaxes all the stress away`
`03:54.44`	`SkramX`	`anyplace that streams stuff like that fof free?`
`03:54.56`	`twisted`	`www.shoutcast.com`
`03:55.01`	`twisted`	`possibly`
`03:55.08`	`twisted`	`i have quite a few cd's tho`
`03:55.21`	`Nugget`	`iTunes has a lot of good streaming radio stations.`
`03:55.44`	`twisted`	`yeah`
`03:57.07`	`zamsler`	`shoutcast is cool.`
`03:57.41`	`*** join/#asterisk YaP (n=YaP@host-84-222-176-162.cust-adsl.tiscali.it)`
`03:57.48`	`YaP`	`hi`
`03:57.53`	`zamsler`	`hi`
`03:57.56`	`twisted`	`lo`
`03:58.04`	`zamsler`	`twisted, how have u been?`
`03:58.10`	`zamsler`	`been a while.`
`03:58.18`	`twisted`	`zamsler, heh... stressed`
`03:58.29`	`twisted`	`but it's all fading away now ;)`
`03:58.34`	`zamsler`	`lol`
`03:58.37`	`zamsler`	`more beer.`
`03:58.39`	`twisted`	`no`
`03:58.49`	`zamsler`	`lol`
`03:58.54`	`zamsler`	`have a sam on me.`
`03:59.02`	`twisted`	`is sam short for samantha?`
`03:59.06`	`twisted`	`:P`
`03:59.23`	`zamsler`	`lol`
`03:59.26`	`zamsler`	`Sam Adams...`
`03:59.28`	`zamsler`	`beer.`
`03:59.38`	`zamsler`	`but a samantha would work..`
`03:59.48`	`Nugget`	`I like sam adams on tap ok, but in a bottle I'm not so fond of it.`
`03:59.52`	`twisted`	`i knew what you meant :P`
`04:00.44`	`zamsler`	`;)`
`04:00.59`	`YaP`	`i've a problem with asterisk, in my dialplan i send all incoming calls to a sip client and if nobody answer after the timeout the call is redirected to voicemail`
`04:01.17`	`zamsler`	`wow YaP sounds like a huge problem`
`04:01.22`	`YaP`	`if the sip client isn't connected the call goes to the voicemail immediatly`
`04:01.35`	`zamsler`	`of course.`
`04:01.38`	`YaP`	`i would like to wait, i tried to use Wait(30)`
`04:01.47`	`zamsler`	`that doesn't sound like a problem.`
`04:01.58`	`*** join/#asterisk Veto_laptop (i=mdkuser@cpe-66-69-38-192.satx.res.rr.com)`
`04:02.03`	`zamsler`	`wait for what? if no one is available, then it should goto voicemail.`
`04:02.04`	`zamsler`	`;)`
`04:02.07`	`YaP`	`but now the call isn't redirected to voicemail`
`04:02.22`	`YaP`	`zamsler: wait for other phones not connected to asterisk`
`04:02.23`	`zamsler`	`well if you would quit messing things up..`
`04:02.37`	`*** join/#asterisk websae (i=websae@207-118-134-96.dyn.centurytel.net)`
`04:03.06`	`zamsler`	`YaP, people like twisted have put a lot of time into asterisk. if you would RTFM and quit breaking things... it would make his time more worth wile.`
`04:03.24`	`zamsler`	`search googole for macro dial.`
`04:03.27`	`zamsler`	`;)`
`04:03.38`	`zamsler`	`err asterisk macro dial`
`04:03.52`	`YaP`	`zamsler: i read the fine manual but i didn't found the answer`
`04:03.59`	`YaP`	`so maybe i didn't understand the manual`
`04:04.10`	`YaP`	`if you can give me an hint i'll appreciate`
`04:04.16`	`zamsler`	`for real.. there are how many thousnads of asterisk servers up and running.. we don't have these problems..`
`04:04.35`	`zamsler`	`I know how to solve your solution..`
`04:04.40`	`zamsler`	`Cisco Call Manager.`
`04:04.44`	`YaP`	`ahahah`
`04:04.48`	`zamsler`	`they have a nice web interface..`
`04:04.59`	`zamsler`	`you would never be able to screw it up.`
`04:05.07`	`YaP`	`i like asterisk :)`
`04:05.11`	`*** join/#asterisk nyquist (n=NyQuist@cp207-219-37-239.cp.telus.net)`
`04:05.22`	`zamsler`	`then you should learn how to use it.`
`04:05.34`	`Dr_Ray`	`jesus, take a chill pill`
`04:05.35`	`YaP`	`i'm trying to learn`
`04:05.38`	`zamsler`	`lol`
`04:06.00`	`YaP`	`but i don't understand this beaviour`
`04:06.08`	`zamsler`	`YaP, there is this really cool thing called astersik@home`
`04:06.12`	`zamsler`	`try that`
`04:06.22`	`zamsler`	`;)`
`04:06.23`	`YaP`	`i'm just looking for an hint to go ahead`
`04:06.29`	`Dr_Ray`	`voip-info.org has a searchable wiki`
`04:06.33`	`zamsler`	`lol`
`04:06.46`	`zamsler`	`Dr_Ray, ? = RTFM ??`
`04:06.49`	`zamsler`	`hahah`
`04:07.16`	`Dr_Ray`	`well, without being an asshole maybe?`
`04:07.34`	`zamsler`	`I am not a nice person. I am kinda like JerJer`
`04:07.43`	`zamsler`	`just a bit quieter.`
`04:07.50`	`Dr_Ray`	`why don't you try doing that now`
`04:08.43`	`zamsler`	`I am sure we would be able to look at it id you put it in pastebin YaP`
`04:08.44`	`zamsler`	`;)`
`04:08.51`	`zamsler`	`that is normally how you get help`
`04:09.16`	`zamsler`	`but if it is something stupid, you will get > /dev/null`
`04:10.31`	`YaP`	`zamsler: It's just an extension with Dial, Wait, VoiceMail`
`04:10.51`	`Dr_Ray`	`maybe at the end of the Dial command?`
`04:10.53`	`YaP`	`VoiceMail is never executed if the dialed client isn't connected`
`04:11.13`	`zamsler`	`yap, if that is the case, there are 100 examples online for working exten-vm scripts.`
`04:11.40`	`zamsler`	`have you searched google yet?`
`04:11.42`	`zamsler`	`;)`
`04:12.26`	`Rowter`	`anyone knows about the problem on wctdm (/lib/modules/2.6.8-2-686/extra/wctdm.ko) for debian 2.6?`
`04:13.18`	`zamsler`	`Rowter, hmm.`
`04:13.32`	`zamsler`	`when was your cvs checkout?`
`04:13.41`	`Rowter`	`zamsler, yeah. zaptel`
`04:13.45`	`zamsler`	`I installed one last week and it worked.`
`04:14.05`	`zamsler`	`:-?`
`04:14.41`	`Rowter`	`zamsler, mmh, debian sarge 3.1`
`04:14.49`	`zamsler`	`yeah`
`04:14.58`	`zamsler`	`but when was the zaptel checkout?`
`04:16.03`	`zamsler`	`kernel 2.6.12-1-686-smp worked last week`
`04:16.13`	`Rowter`	`I just did it now..`
`04:16.21`	`Rowter`	`well yesterday >)`
`04:16.30`	`zamsler`	`hmm`
`04:16.30`	`Rowter`	`let me checkout again`
`04:16.40`	`zamsler`	`I am compiling now.`
`04:17.45`	`Rowter`	`FATAL: Error inserting wctdm (/lib/modules/2.6.8-2-686/extra/wctdm.ko): Unknown symbol in module, or unknown parameter (see dmesg)`
`04:17.46`	`websae`	`anyone here using ASTBILL?`
`04:17.51`	`websae`	`im curious how it works out`
`04:18.41`	`zamsler`	`yup`
`04:18.43`	`zamsler`	`:(`
`04:19.05`	`zamsler`	`insmod: error inserting '/lib/modules/2.6.12/misc/wctdm.ko': -1 Unknown symbol in module`
`04:19.11`	`*** join/#asterisk NDT (n=me@cpe-24-195-219-245.nycap.res.rr.com)`
`04:19.14`	`Rowter`	`ooh.. zamsler`
`04:19.23`	`Rowter`	`so now we both have the same problem`
`04:19.24`	`zamsler`	`twisted, thoughts?`
`04:19.26`	`Rowter`	`hehe`
`04:19.33`	`zamsler`	`:(`
`04:19.44`	`Rowter`	`let's work it out..`
`04:20.14`	`zamsler`	`hmm`
`04:23.32`	`twisted`	`thoughts? from me?`
`04:23.40`	`twisted`	`i'm listening to sinatra whilst i clean my apartment`
`04:23.44`	`zamsler`	`lol`
`04:23.49`	`zamsler`	`I did that earlier.`
`04:23.49`	`Rowter`	`heh`
`04:24.23`	`Rowter`	`mmh, what should I do? use the apt-get install zaptel-source?`
`04:24.47`	`zamsler`	`Rowter, mostlikely you should submit a bug.`
`04:25.03`	`zamsler`	`but I don;t know how to get any dumps for this.`
`04:25.19`	`zamsler`	`I am not a developer.`
`04:25.23`	`Rowter`	`ok, but first I need to let this working hehe..`
`04:25.34`	`Rowter`	`as it was`
`04:25.36`	`zamsler`	`do a cvs co from last week`
`04:26.33`	`Rowter`	`zamsler, could you tell me how to tell cvs to get last week?`
`04:26.49`	`Rowter`	`let me google for that heh`
`04:27.03`	`zamsler`	`no.`
`04:27.05`	`zamsler`	`man cvs`
`04:27.07`	`zamsler`	`RTFM`
`04:27.09`	`Rowter`	`ok :)`
`04:27.10`	`zamsler`	`Damnit`
`04:27.14`	`zamsler`	`LOL`
`04:27.52`	`zamsler`	`cvs co -D 2005-10-02`
`04:27.53`	`dan__t`	`owned.`
`04:27.54`	`zamsler`	`;)`
`04:27.56`	`*** join/#asterisk \|Vulutre\| (n=Vulutre@211.119.205.68.cfl.res.rr.com)`
`04:28.08`	`\|Vulutre\|`	`Anyone here have a PRI in St. Louis, MO?`
`04:28.09`	`Rowter`	`hehe thanks`
`04:29.43`	`zamsler`	`that doesn;t help either.`
`04:29.56`	`Rowter`	`yeah just notice that zamsler`
`04:29.56`	`Rowter`	`mmh`
`04:30.15`	`zamsler`	`;)`
`04:30.23`	`Rowter`	`on google says something about it for gentoo..`
`04:30.27`	`zamsler`	`lol`
`04:30.31`	`zamsler`	`no..`
`04:30.37`	`*** join/#asterisk theblue (n=theblue@pcp04402293pcs.nrockv01.md.comcast.net)`
`04:30.37`	`zamsler`	`on your debian box.`
`04:30.40`	`zamsler`	`do man cvs`
`04:30.40`	`theblue`	`Hi all.`
`04:30.42`	`zamsler`	`;)`
`04:30.59`	`zamsler`	`Rowter, you should use AAH also`
`04:31.00`	`zamsler`	`;)`
`04:31.02`	`\|Vulutre\|`	`hmm trying to find a ~ price on PRI Integrated`
`04:31.19`	`zamsler`	`\|Vulutre\|, who is the LEC there?`
`04:31.31`	`zamsler`	`SBC?`
`04:31.34`	`\|Vulutre\|`	`zamsler: I believe it is SBC`
`04:31.39`	`zamsler`	`ouch.`
`04:31.41`	`\|Vulutre\|`	`yea`
`04:31.52`	`zamsler`	`if TDS is there then u can get ~$540`
`04:31.57`	`\|Vulutre\|`	`the one quote I like is at $640 for XO`
`04:32.00`	`zamsler`	`SBC wants ~$700`
`04:32.00`	`\|Vulutre\|`	`where is TDS?`
`04:32.01`	`Rowter`	`zamsler, why man cvs?`
`04:32.04`	`theblue`	`Does anyone know of any free SIP or IAX based VoIP providers?`
`04:32.05`	`Rowter`	`ahh?`
`04:32.18`	`zamsler`	`\|Vulutre\|, $640 is pretty good.`
`04:32.40`	`zamsler`	`hmm`
`04:32.42`	`zamsler`	`not really.`
`04:32.50`	`zamsler`	`$26/line.`
`04:32.59`	`\|Vulutre\|`	`zamsler: well its 1.44 Data/12lines`
`04:33.11`	`\|Vulutre\|`	`and it pulls from the data when a line is in use.. you know the integrated`
`04:33.20`	`zamsler`	`yeha`
`04:33.24`	`zamsler`	`I have it from TDS`
`04:33.30`	`\|Vulutre\|`	`and 100,000 LD mins... but its XO so its already VoIP`
`04:33.33`	`zamsler`	`but I pay $179`
`04:33.37`	`\|Vulutre\|`	`JESUS`
`04:33.40`	`\|Vulutre\|`	`$1279`
`04:33.40`	`zamsler`	`lol`
`04:33.41`	`\|Vulutre\|`	`urg`
`04:33.43`	`\|Vulutre\|`	`179`
`04:33.43`	`zamsler`	`no LS`
`04:33.47`	`zamsler`	`er LD`
`04:33.56`	`\|Vulutre\|`	`unlimited local?`
`04:33.56`	`zamsler`	`I only take incoming calls on my PRI.`
`04:34.00`	`\|Vulutre\|`	`ah`
`04:34.04`	`zamsler`	`All outgoing is VOIP.`
`04:34.10`	`zamsler`	`it is cheaper.l`
`04:34.17`	`zamsler`	`nothing is local here.`
`04:34.18`	`\|Vulutre\|`	`who do you use for VoIP?`
`04:34.24`	`zamsler`	`they charge by the mile.`
`04:34.31`	`zamsler`	`I have many providers.`
`04:34.31`	`dan__t`	`Ok, even though we already have a championship, the F1 GP of Japan is on in 30 mins`
`04:34.32`	`dan__t`	`FYI`
`04:34.33`	`dan__t`	`heh`
`04:34.39`	`dan__t`	`have a champion, rather.`
`04:34.45`	`dan__t`	`I need mroe beer, sorry.`
`04:34.50`	`\|Vulutre\|`	`zamsler: Ive used a few and I always get complaints cause the providers become sucky some days`
`04:34.52`	`zamsler`	`\|Vulutre\|, sixtel, voxee, voipjet, teliax, nufone`
`04:34.55`	`\|Vulutre\|`	`tried VPC`
`04:34.57`	`Rowter`	`wctdm: disagrees about version of symbol zt_receive`
`04:34.57`	`Rowter`	`wctdm: Unknown symbol zt_receive`
`04:35.00`	`\|Vulutre\|`	`Ill try some of those`
`04:35.05`	`\|Vulutre\|`	`asterlink is good`
`04:35.21`	`zamsler`	`I am ~5ms from nufone and sixtel`
`04:35.25`	`zamsler`	`they work the best.`
`04:35.34`	`zamsler`	`I use voipjet for my canada calls`
`04:35.47`	`zamsler`	`and sixtel, voxee handles my bulk.`
`04:36.02`	`zamsler`	`I use nufone and teliax if needed.`
`04:36.28`	`zamsler`	`I am using AAH on debian, and I use the rollover feature so all my calls go out.`
`04:37.02`	`zamsler`	`I normally use ~5000 minutes a month outgoing.`
`04:39.19`	`\|Vulutre\|`	`zamsler: yea we use ~10k per office`
`04:39.28`	`zamsler`	`damn.`
`04:39.33`	`zamsler`	`that's cool.`
`04:39.39`	`\|Vulutre\|`	`still not bad`
`04:39.44`	`\|Vulutre\|`	`but CA raped me`
`04:39.48`	`zamsler`	`I hardly have issues terminating calls.`
`04:40.03`	`\|Vulutre\|`	`I want to get one or 2 of the XO unlimited LD lines`
`04:40.12`	`zamsler`	`yeah`
`04:40.15`	`\|Vulutre\|`	`then I can use them to throw all my LD over using DUNDi`
`04:40.20`	`zamsler`	`TDS will do that also.`
`04:40.31`	`*** join/#asterisk Eight (n=blake@12-227-171-175.client.mchsi.com)`
`04:40.34`	`\|Vulutre\|`	`too bad TDS doesn't seem to be in any of my markets`
`04:40.41`	`zamsler`	`uhuh`
`04:40.48`	`\|Vulutre\|`	`CA, AZ, FL, SC, MO`
`04:40.59`	`zamsler`	`they are giving good prices to piss SBC off.`
`04:41.00`	`zamsler`	`LOOL`
`04:41.12`	`\|Vulutre\|`	`need PRIs in St. Louis, Miami, and Phoenix`
`04:41.14`	`zamsler`	`in IL they own fiber to ever SBC CO in my area`
`04:41.26`	`\|Vulutre\|`	`damn`
`04:41.35`	`zamsler`	`SBC wants $800 for the same service.`
`04:41.42`	`zamsler`	`and I get special SBC discounts.`
`04:41.43`	`zamsler`	`LOL`
`04:41.46`	`\|Vulutre\|`	`damn`
`04:41.47`	`\|Vulutre\|`	`again`
`04:41.49`	`zamsler`	`uhuh`
`04:42.00`	`zamsler`	`I can get a DS3 for 3000/mon.`
`04:42.05`	`\|Vulutre\|`	`I think $640 for the XO integrated isn't bad just want to make sure`
`04:42.07`	`\|Vulutre\|`	`WHAT?!!?!`
`04:42.10`	`zamsler`	`but have to pay out the ear for a phone line.`
`04:42.13`	`zamsler`	`;)`
`04:42.24`	`\|Vulutre\|`	`Bellsouth introducted 45mbit LAN lines down here for $6k`
`04:42.28`	`\|Vulutre\|`	`I thought that was good`
`04:42.30`	`zamsler`	`I get bandwidth for 42.50/Mbit`
`04:42.44`	`\|Vulutre\|`	`zamsler: where the hell are you?`
`04:42.53`	`\|Vulutre\|`	`springfield?`
`04:42.58`	`zamsler`	`Libertyville.`
`04:43.01`	`zamsler`	`lol`
`04:43.17`	`zamsler`	`I go to the phone companies differently.`
`04:43.24`	`zamsler`	`I tell them whT I will pay.`
`04:43.31`	`zamsler`	`they can choose to take my business.`
`04:43.48`	`zamsler`	`If they do not, I use last mile to find what I need at my prices.`
`04:44.05`	`\|Vulutre\|`	`whats last mile?`
`04:44.08`	`zamsler`	`sbc passed on my first deal.`
`04:44.46`	`zamsler`	`after i forwarded my prices to them... they gave me a DS3 for 1200/mo, but screwed me on everything else.`
`04:45.02`	`zamsler`	`lastmile is a telco broker company.`
`04:45.08`	`zamsler`	`they work if u know how to use them`
`04:45.13`	`zamsler`	`else u will get screwed.`
`04:45.17`	`\|Vulutre\|`	`ah`
`04:45.29`	`\|Vulutre\|`	`I was using some random place I found in yellowpages in MO`
`04:45.47`	`\|Vulutre\|`	`Ive used Broadwing (terrible after support) and Xspedius`
`04:45.52`	`zamsler`	`I send them my requirements and a PO and they auction off my service.`
`04:46.14`	`zamsler`	`I have an awsome guy that does bandwidth.`
`04:46.16`	`wunderkin`	`i just had a run-in with broadwing..`
`04:46.22`	`zamsler`	`he is out of Cali.`
`04:46.31`	`\|Vulutre\|`	`wunderkin: how did it go?`
`04:46.37`	`\|Vulutre\|`	`wunderkin: don't tell me it was in CA`
`04:46.38`	`ender`	`hrm, We're using broadwing for our bandwidth too`
`04:46.58`	`wunderkin`	`it took a couple days to fix my pri.. they set it to SF instead of ESF and they kept blaming me.. no its in phx`
`04:47.08`	`zamsler`	`lol`
`04:47.13`	`\|Vulutre\|`	`took them 2 months to port in a DID`
`04:47.15`	`wunderkin`	`but its for ld, i think their switch they said is in hayward ca`
`04:47.19`	`zamsler`	`damn`
`04:47.19`	`\|Vulutre\|`	`one that was ON the order`
`04:47.29`	`\|Vulutre\|`	`didn't get ported in turnover`
`04:47.34`	`\|Vulutre\|`	`so I got a free month`
`04:47.37`	`twisted`	`omfg`
`04:47.42`	`twisted`	`this desk is made of wood!`
`04:47.46`	`\|Vulutre\|`	`hahahaha`
`04:47.48`	`zamsler`	`lol`
`04:47.51`	`\|Vulutre\|`	`random`
`04:47.53`	`zamsler`	`twisted, ok?`
`04:48.04`	`ender`	`twisted: as opposed to what? cardboard?`
`04:48.07`	`twisted`	`zamsler, yeah, just cleaning`
`04:48.08`	`zamsler`	`lol`
`04:48.11`	`zamsler`	`oh ok.,`
`04:48.30`	`zamsler`	`kinda like I find that my carpet is tan when I clean..`
`04:48.35`	`zamsler`	`;)`
`04:48.40`	`twisted`	`lol`
`04:48.40`	`twisted`	`yeha`
`04:48.44`	`zamsler`	`I have 19 computers in my apt.`
`04:48.51`	`twisted`	`lol`
`04:48.53`	`\|Vulutre\|`	`zamsler: and your power bill is...`
`04:48.54`	`twisted`	`i don't have THAT many`
`04:48.54`	`zamsler`	`It is kinda hard to clean around them`
`04:49.01`	`zamsler`	`\|Vulutre\|, paid for`
`04:49.03`	`zamsler`	`;)`
`04:49.06`	`ender`	`yikes.`
`04:49.07`	`\|Vulutre\|`	`lol`
`04:49.07`	`Dr_Ray`	`19 computers in a studio apartment`
`04:49.08`	`ender`	`thats a lot`
`04:49.15`	`twisted`	`i have like.. 6`
`04:49.21`	`\|Vulutre\|`	`PC+Laptop+Test Server`
`04:49.24`	`twisted`	`7 if you count the xbox`
`04:49.24`	`zamsler`	`lol`
`04:50.16`	`zamsler`	`i got a new remote today. it is awesome..`
`04:50.28`	`zamsler`	`logitech Harmony 520`
`04:50.39`	`zamsler`	`$90 at wal-mart`
`04:51.01`	`zamsler`	`every geek needs one.`
`04:51.06`	`\|Vulutre\|`	`zamsler: I got the other one the 800 or what`
`04:51.07`	`\|Vulutre\|`	`rox`
`04:51.18`	`marc324`	`what the download command in ftp?`
`04:51.22`	`Dr_Ray`	`get`
`04:51.28`	`Qwell`	`get`
`04:51.33`	`Qwell`	`erm, yeah`
`04:51.34`	`Dr_Ray`	`binary`
`04:51.35`	`zamsler`	`lol`
`04:51.42`	`zamsler`	`damn.`
`04:51.46`	`dan__t`	`heh`
`04:51.52`	`zamsler`	`this is getting crazy`
`04:52.01`	`zamsler`	`how can u be on IRC and not know how to ftp?`
`04:52.03`	`zamsler`	`FFS`
`04:52.06`	`zamsler`	`RTFM`
`04:52.12`	`Qwell`	`yeah, really...`
`04:52.17`	`zamsler`	`damn kids`
`04:52.25`	`zamsler`	`mirc kiddies`
`04:52.57`	`zamsler`	`I can see needing help compiling a kernel in debian.`
`04:52.59`	`zamsler`	`but FTP?`
`04:53.03`	`zamsler`	`:!@#$!#`
`04:53.12`	`*** join/#asterisk Connor (n=billy@198-144-165-65.knx.tn.nxs.net)`
`04:53.18`	`Qwell`	`zamsler: newb :p`
`04:53.40`	`Qwell`	`oh, I read that as "I need help"`
`04:53.41`	`zamsler`	`yeah, we were all there at one time.. but we knew how to ftp..`
`04:55.33`	`Qwell`	`anthm: you know it`
`04:55.44`	`zamsler`	`lol`
`04:56.21`	`ender`	`there are people that don't realize that the 'irc' of 'mirc' actually means something.`
`04:56.41`	`Qwell`	`ender: most users of mirc`
`04:56.41`	`ender`	`think think that 'mirc' _is_ the chat system.`
`04:57.23`	`zamsler`	`<PROTECTED>`
`04:58.37`	`konfuzed`	`;^?`
`04:58.54`	`Qwell`	`please, the unzip command would have seg faulted :p`
`04:59.02`	`Nivex`	`ender: I get that at work all the time. We have a Jabber server and the preferred client is Gaim. People come up to me all the time and tell me "I can't log in to Gaim."`
`04:59.02`	`zamsler`	`hahahaha`
`04:59.14`	`zamsler`	`I use gaim`
`04:59.16`	`marc324`	`150 Opening BINARY mode data connection for postgresql-8.0.4.tar.gz (13929175 bytes). it freezed`
`04:59.17`	`zamsler`	`lol`
`04:59.21`	`zamsler`	`but not for IRC`
`04:59.31`	`zamsler`	`I used to use BitchX`
`04:59.31`	`Qwell`	`Nivex: Thats somewhat excusable`
`04:59.33`	`zamsler`	`LOL`
`04:59.39`	`Nivex`	`oh, well, the people who use Gaim for IRC are a whole 'nother crowd.`
`04:59.45`	`zamsler`	`uhuh`
`04:59.54`	`Nivex`	`Qwell: I usually let it slide since I know what they're talking about.`
`05:00.17`	`Nivex`	`It's the ones who tell me "My Internet is broken." that I want to thwap.`
`05:00.22`	`Qwell`	`What bugs me is when people at my work call AIM "IM"`
`05:00.31`	`Qwell`	`"Are you signed onto IM?"`
`05:00.40`	`ender`	`nod`
`05:00.47`	`zamsler`	`I am signed into 6 IMs`
`05:00.53`	`NDT`	`No...it's the people that call a computer a piece of crap when they did something stupid to the OS that I want to thwap`
`05:00.54`	`zamsler`	`or 6 accounts`
`05:00.55`	`ender`	`Which one? I have 4....`
`05:01.00`	`zamsler`	`but 1 IM program`
`05:01.14`	`SkramX`	`People at my school think Skype is the only VoIP platform. I'd like to slap them.`
`05:01.14`	`zamsler`	`PEBKAC`
`05:01.18`	`SkramX`	`:D`
`05:01.35`	`zamsler`	`ID10T errors`
`05:01.41`	`\|Vulutre\|`	`SkramX: but it is`
`05:02.05`	`zamsler`	`I wish skype would allow 3rd party connectionsl`
`05:03.06`	`\|Vulutre\|`	`yea it would be nice to bridge that crowd.. I believe thats a bounty`
`05:03.49`	`zamsler`	`uhuh`
`05:03.51`	`zamsler`	`Y@wn`
`05:03.56`	`zamsler`	`bedtime`
`05:04.15`	`zamsler`	`night all`
`05:04.20`	`konfuzed`	`well cant you get asterisk to call up a skype account?`
`05:04.38`	`konfuzed`	`i never considered it before but ehy not?`
`05:05.55`	`konfuzed`	`if so then you could set up like 4 skype accounts and then make a skype gateway ? mm maybe?`
`05:07.15`	`Qwell`	`konfuzed: Asterisk doesn't support the skype protocol`
`05:07.28`	`tzanger`	`konfuzed: many varied reasons, the biggest being that there is no protocol driver for skype for asterisk`
`05:07.44`	`tzanger`	`konfuzed: also, the codec that skype uses isn't available on asterisk`
`05:07.57`	`Qwell`	`what codec?`
`05:08.08`	`tzanger`	`konfuzed: also, there are some who take issue with the closed-source nature of skype`
`05:08.13`	`tzanger`	`Qwell: wideband ILBC`
`05:12.16`	`coppice`	`I think they call it something else now, like iSBC`
`05:18.55`	`*** join/#asterisk loud (n=ariel@cypher.punk.net)`
`05:19.22`	`Qwell`	`Forecast for Astricon - sunny and hot`
`05:21.36`	`Qwell`	`hmm, 2.5 days away`
`05:26.13`	`*** join/#asterisk Horshack (n=cdh@cpe-69-203-25-182.nyc.res.rr.com)`
`05:36.30`	`SplasPood`	`Anyone here mind helping me with a Cisco ATA186 dialplan?`
`05:40.38`	`*** join/#asterisk asterisk99 (n=chatzill@modemcable169.194-130-66.mc.videotron.ca)`
`05:41.18`	`asterisk99`	`anyone kow how to get zaptel to load on boot on a Gentoo system??`
`05:41.42`	`*** join/#asterisk argos73 (n=mike@65-85-207-101.client.dsl.net)`
`05:44.28`	`*** join/#asterisk alrs (n=lars@dsl092-033-090.lax1.dsl.speakeasy.net)`
`05:49.09`	`konfuzed`	`cant skype be used to call a SIP account via sipuser@Aserver.com ?`
`05:49.28`	`konfuzed`	`i can be a little slow some times`
`05:49.30`	`konfuzed`	`;^)`
`05:52.18`	`tzanger`	`not that I'm aware of, no`
`06:01.42`	`konfuzed`	`hmmm`
`06:01.48`	`konfuzed`	`has anyone seen this http://www.jajah.com/en/features_protocols.asp`
`06:02.19`	`konfuzed`	`rather interesting part of the mix`
`06:05.34`	`konfuzed`	`http://www.jajah.com/en/features_codecs.asp is quite a list of support codecs includign speex and iax of course`
`06:08.11`	`*** join/#asterisk ManxPower (n=eric@1Cust3844.an8.dfw28.da.uu.net)`
`06:08.31`	`ManxPower`	`~docs`
`06:08.33`	`jbot`	`docs is, like, Documentation can be found at http://www.digium.com/index.php?menu=documentation or http://www.digium.com/handbook-draft.pdf or http://www.voip-info.org/wiki-Asterisk or http://www.asteriskdocs.org or http://www.oreilly.com/catalog/asterisk`
`06:10.38`	`*** join/#asterisk af_ (n=af@ip-142-250.sn1.eutelia.it)`
`06:17.48`	`*** join/#asterisk nnnnnn (n=killfill@pc-200-74-17-222.nunoa2.pc.metropolis-inter.com)`
`06:18.13`	`killfill`	`hi`
`06:21.12`	`konfuzed`	`ok so I read some about the skype problems too`
`06:22.22`	`konfuzed`	`of course that always makes things a little Konphuzedless`
`06:24.47`	`*** join/#asterisk _Thor (i=Christia@user-vc8fl7l.biz.mindspring.com)`
`06:24.58`	`_Thor`	`hello everyone`
`06:25.32`	`_Thor`	`anyone has worked with PrepaidCall (calling card add-on)?`
`06:25.57`	`konfuzed`	`hello * 295 back at ya`
`06:26.29`	`_Thor`	`hello konfuzed`
`06:26.56`	`konfuzed`	`hi`
`06:27.15`	`_Thor`	`have you worked with prepaidcall?`
`06:27.23`	`konfuzed`	`mmmmmm no`
`06:27.31`	`_Thor`	`know what it is?`
`06:27.40`	`konfuzed`	`yes`
`06:27.49`	`Rowter`	`anyone has seen this error fsk_serie made mylen < 0 (-23)`
`06:28.03`	`Rowter`	`Oct 9 02:27:14 ERROR[26392]: callerid.c:274 callerid_feed: fsk_serie made mylen < 0 (-23)`
`06:28.03`	`Rowter`	`Oct 9 02:27:14 WARNING[26392]: chan_zap.c:6031 ss_thread: CallerID feed failed: Success`
`06:28.10`	`Rowter`	`am not getting the callerid.`
`06:28.43`	`JerJer`	`play with fxotune`
`06:28.45`	`_Thor`	`I don´t know why in the world it ocurred to me to use it`
`06:29.09`	`konfuzed`	`just for calling cards really`
`06:29.21`	`konfuzed`	`of go and creaatively utilize anything you want to`
`06:29.23`	`konfuzed`	`:^)`
`06:29.29`	`_Thor`	`do you know of any other solution for prepaid calls?`
`06:29.49`	`konfuzed`	`in context of calling cards`
`06:29.56`	`_Thor`	`not really`
`06:30.09`	`konfuzed`	`or prepaid minutes for extension use`
`06:30.15`	`_Thor`	`right`
`06:30.34`	`konfuzed`	`im sorta bolting one together`
`06:30.41`	`Icemaann`	`is there anyway to have asterisk detect certain DTMF tones during Dial()? If I have dialed someone, and we have talked for a while, and then I press *78, I want it to bring MOH into the channel (both sides would hear it).`
`06:30.42`	`_Thor`	`right, prepaid minutes per extension used, based on an existing balance`
`06:30.43`	`*** join/#asterisk Blazint (n=blazin@cm225.epsilon203.maxonline.com.sg)`
`06:31.13`	`_Thor`	`what direction are you going to?`
`06:31.25`	`Icemaann`	`it actually wouldnt be MOH, but playback for both parties to hear. MOH was a bad example lol.`
`06:31.37`	`konfuzed`	`A Hybrid of Open Source Technologies`
`06:31.38`	`konfuzed`	`oooooooooooooo`
`06:31.57`	`_Thor`	`prepaidcall is open source`
`06:32.14`	`_Thor`	`why you didn´t chose it?`
`06:32.23`	`konfuzed`	`conceptually`
`06:33.04`	`konfuzed`	`i have more accounting and billing to deal with besides asterisk`
`06:33.31`	`dan__t`	`Ah`
`06:33.33`	`dan__t`	`damn good race.`
`06:33.35`	`dan__t`	`with a last-lap takeover.`
`06:33.43`	`_Thor`	`umm`
`06:33.56`	`konfuzed`	`theres also a big difference between billing and accounting`
`06:34.53`	`_Thor`	`because billing is on-line, and accounting is after the fact?`
`06:35.34`	`konfuzed`	`so it could be said that this series of systems talks to asterisk and other apps and sucks in reports from those apps too`
`06:36.44`	`_Thor`	`I got a couple of friends working in projects like that. The idea is to integrate billing from different sources`
`06:37.23`	`konfuzed`	`and you cant do with out automated account activation (provisioning) payment (integrated ecomerce) and CRM Management (Collections/Suspensions)`
`06:37.43`	`_Thor`	`The idea is to use Oracle for that`
`06:37.52`	`konfuzed`	`well thats one idea`
`06:38.21`	`konfuzed`	`oracle is awesome but like database bloat ware`
`06:38.35`	`konfuzed`	`keep it simple`
`06:38.47`	`konfuzed`	`its much less expensive`
`06:38.54`	`_Thor`	`if you ever need a nice little call accounting app for the client side, let me know`
`06:39.20`	`konfuzed`	`as in web page display of it or a reporting engine?`
`06:40.20`	`konfuzed`	`maybe tool tray utility to monitor sip headers for call time ? hmmmmmmm`
`06:41.18`	`_Thor`	`well, I wrote the first version 10 years ago... and to this date I believe a running exec performs/displays better than the current tendency to use web page displays`
`06:41.29`	`*** join/#asterisk djin_ib (n=djin_ib@gridfox.xs4all.nl)`
`06:41.46`	`konfuzed`	`well thats always been true`
`06:42.28`	`_Thor`	`anyway K, let me get back to my suffer some more`
`06:43.04`	`konfuzed`	`im curious to see the call acct app`
`06:43.18`	`_Thor`	`oh, by all means`
`06:43.37`	`_Thor`	`contact me at c.savinovich@itntelecom.com`
`06:45.55`	`konfuzed`	`mmmmmmmm interesting site`
`06:46.40`	`_Thor`	`think so? thank you, it is all technology I was working on 5 years ago`
`06:46.57`	`_Thor`	`the new web site will come out one day ;)`
`06:47.26`	`konfuzed`	`it has that hybrid technology appeal`
`06:47.44`	`CoaxD`	`any of you people total OpenVPN gurus?`
`06:48.16`	`_Thor`	`really?, let me look at it one more time, <g>`
`06:49.07`	`_Thor`	`I was working on web-2-phone technoloy way before Mark Spencer finished high school <g> <g>`
`06:49.27`	`konfuzed`	`PDAs WEBCALL VoIP ip-PBX`
`06:58.50`	`*** join/#asterisk websae (i=websae@207-118-134-96.dyn.centurytel.net)`
`07:02.09`	`*** join/#asterisk blueone (n=blueone@62.240.35.202)`
`07:03.52`	`*** join/#asterisk r0d3nt (i=nobody@wsip-24-234-241-145.lv.lv.cox.net)`
`07:05.16`	`*** join/#asterisk nnnnnn (n=killfill@pc-200-74-17-222.nunoa2.pc.metropolis-inter.com)`
`07:05.40`	`killfill`	`hey, how do i make sure asterix can dial with my x100p clone card?`
`07:07.29`	`JerJer`	`don't buy a clone card`
`07:13.09`	`killfill`	`hm..`
`07:19.01`	`*** join/#asterisk ^n0b0dy^ (i=KILLME@200-70-145-170.mrse.com.ar)`
`07:19.45`	`*** part/#asterisk ^n0b0dy^ (i=KILLME@200-70-145-170.mrse.com.ar)`
`07:23.28`	`*** join/#asterisk brc_ (n=Brian@pdpc/supporter/basic/brc)`
`07:27.16`	`*** join/#asterisk alphaque (n=alphaque@60.48.197.127)`
`07:27.42`	`*** join/#asterisk leputois (n=alexis@toronto-HSE-ppp4326258.sympatico.ca)`
`07:28.19`	`leputois`	`i just setup a new server ... everything is working fine except one thing ... no sound`
`07:28.52`	`leputois`	`anyone have an idea ??`
`07:29.32`	`alphaque`	`no sound from where ?`
`07:30.31`	`djin_ib`	`Zaptel modules are loaded without problem by hand, but not at reboot. What does 'chkconfig -add zaptel' normally do? There is a /etc/rc.d/init.d/zaptel, but no /etc/rc.d/rc2.d/S09zaptel.`
`07:30.44`	`leputois`	`anywhere ... if i put in my dialplan to play a sound i will hear it but if i make a call i cannot hear the other person`
`07:31.00`	`alphaque`	`leputois: elaborate, show dialplan`
`07:31.15`	`alphaque`	`djin_ib: i'm not a linux dude, so cant help u with that`
`07:31.24`	`djin_ib`	`leputois, does the other one hear you?`
`07:31.40`	`djin_ib`	`alphaque, np. thanks.`
`07:32.17`	`djin_ib`	`leputois, is the server behind NAT?`
`07:33.11`	`*** join/#asterisk Nexis (n=nexis@12-219-60-252.client.mchsi.com)`
`07:33.29`	`djin_ib`	`So, you connected directly and the other from outside (through NAT)?`
`07:35.10`	`djin_ib`	`Mmm, leputois didn't quite understand when I asked him not to msg me :)`
`07:35.23`	`alphaque`	`djin_ib: he msged me too`
`07:35.25`	`*** join/#asterisk leputois (n=alexis@toronto-HSE-ppp4326258.sympatico.ca)`
`07:35.31`	`djin_ib`	`Ok, there he is.`
`07:35.37`	`leputois`	`sorry`
`07:36.19`	`djin_ib`	`The problem is probably in your NAT config. Make UDP ports 10000-20000 available for the outside.`
`07:36.39`	`leputois`	`ok i will try this`
`07:36.56`	`*** join/#asterisk Piranha- (i=piranha@d198-166-226-58.abhsia.telus.net)`
`07:37.19`	`leputois`	`i will lost connection since i need to rebbot router for this brb`
`07:37.27`	`leputois`	`reboot **`
`07:42.59`	`*** join/#asterisk leputois_ (n=alexis@toronto-HSE-ppp4326328.sympatico.ca)`
`07:43.08`	`leputois_`	`Still nothing`
`07:43.49`	`djin_ib`	`I'm pretty sure it is. Try it with two phones in the same lan.`
`07:56.24`	`*** join/#asterisk _leputois (n=alexis@toronto-HSE-ppp4325288.sympatico.ca)`
`07:57.10`	`_leputois`	`ok i just pu my server in DMZ so if it was a port problem it should work and still no sound`
`07:57.11`	`*** join/#asterisk mog_home (n=mogorman@user-24-236-84-48.knology.net)`
`08:01.45`	`*** join/#asterisk eGnarF (i=mrbk@eris.hb.lu.se)`
`08:10.11`	`*** join/#asterisk zoa (n=zoa@pirus.securax.be)`
`08:15.56`	`NDT`	`Of topic here but anyone good with gnugk?`
`08:20.43`	`meppl`	`guten morgen`
`08:26.14`	`*** join/#asterisk Vco (n=Vco@S01060050da6df072.sc.shawcable.net)`
`08:28.05`	`Rowter`	`anyone has the callerid problem with tdm400?`
`08:28.06`	`Rowter`	`Oct 9 04:21:51 NOTICE[29604]: chan_zap.c:6001 ss_thread: Got event 18 (Ring Begin)...`
`08:28.06`	`Rowter`	`Oct 9 04:21:51 ERROR[29604]: callerid.c:274 callerid_feed: fsk_serie made mylen < 0 (-15)`
`08:28.06`	`Rowter`	`Oct 9 04:21:51 WARNING[29604]: chan_zap.c:6031 ss_thread: CallerID feed failed: Success`
`08:28.07`	`Rowter`	`Oct 9 04:21:51 WARNING[29604]: chan_zap.c:6075 ss_thread: CallerID returned with error on channel 'Zap/1-1'`
`08:30.23`	`JerJer`	`FXOTUNE`
`08:30.24`	`JerJer`	`use it`
`08:30.35`	`JerJer`	`i told you this the last time you flooded the channel with that crap`
`08:30.50`	`brc_`	`helo`
`08:30.57`	`JerJer`	`moo`
`08:31.00`	`brc_`	`woof`
`08:34.49`	`Rowter`	`JerJer, sorry`
`08:35.02`	`Rowter`	`JerJer, but I have no echo problem, think that will help?`
`08:35.16`	`alphaque`	`jerjer, is there a test suite for chan_h323.so ?`
`08:35.29`	`alphaque`	`just to test if i got the configs right`
`08:41.52`	`JerJer`	`alphaque: now that's funny`
`08:42.21`	`JerJer`	`Rowter: then fiddle with the rxgain and txgain settngs`
`08:47.09`	`JerJer`	`and check for ring/tip reversal`
`08:52.30`	`NDT`	`Anyone think they can solve a gnugk/aquagatekeepr problem for a few bucks? heh cause I am at a loss...`
`09:00.00`	`Rowter`	`JerJer, whats is this tip-reversal mmh`
`09:01.25`	`swm_[away]`	`Anyone know any good applications pertaining to VoIP on the Nokia Symbian Series 60 Models`
`09:03.37`	`*** join/#asterisk dudes (n=dudes@12-215-34-84.client.mchsi.com)`
`09:24.39`	`NDT`	`ugggg.. like impossible to find anyone anywhere that knows anything about aquagatekeeper...hate this thing lol...`
`09:26.08`	`swm_[away]`	`Anyone know any good applications pertaining to VoIP on the Nokia Symbian Series 60 Models`
`09:28.50`	`*** join/#asterisk syle (n=blah@unaffiliated/syle)`
`09:38.33`	`*** join/#asterisk RoyK (n=roy@55.80-202-161.nextgentel.com)`
`09:40.18`	`RoyK`	`wtf?`
`09:40.18`	`RoyK`	`Oct 9 11:39:00 NOTICE[5169]: chan_sip.c:10685 handle_request_register: Registration from '<sip:71398087@213.160.242.140>' failed for '213.161.229.84' - Not a local SIP domain`
`09:40.19`	`RoyK`	`voicemail1*CLI> sip show domains`
`09:40.20`	`RoyK`	`SIP Domain support not enabled.`
`09:44.30`	`swm_[away]`	`WTF is sip domain support? lol`
`09:45.32`	`RoyK`	`swm_[away]: just read sip.conf in the source`
`09:45.39`	`RoyK`	`or t the fm`
`09:45.43`	`RoyK`	`s&t&r&`
`09:45.47`	`RoyK`	`s/t/r/`
`09:45.48`	`*** join/#asterisk nexis (n=nexis@12-219-60-252.client.mchsi.com)`
`09:45.49`	`RoyK`	`:P`
`09:45.57`	`*** join/#asterisk Koshatul (n=evangeli@ip157.net65.ipnetworks.net.au)`
`09:46.45`	`nexis`	`can anyone provide me with a few links to point me in the right direction on how to setup asterisk as a gateway to connect to a IAX service, and provide it as SIP to my hardware phones?`
`09:47.15`	`RoyK`	`argh`
`09:47.17`	`RoyK`	`cvs down?`
`09:47.28`	`swm_[away]`	`It's dead I cant even get my questions answered`
`09:47.35`	`RoyK`	`nexis: it's all in the manual :P`
`09:47.53`	`RoyK`	`~docs`
`09:47.56`	`jbot`	`from memory, docs is Documentation can be found at http://www.digium.com/index.php?menu=documentation or http://www.digium.com/handbook-draft.pdf or http://www.voip-info.org/wiki-Asterisk or http://www.asteriskdocs.org or http://www.oreilly.com/catalog/asterisk`
`09:48.43`	`RoyK`	`swm_[away]: questions?`
`09:48.56`	`nexis`	`RoyK, thank you.`
`09:49.30`	`swm_[away]`	`know any good applications pertaining to VoIP on the Nokia Symbian Series 60 Models`
`09:51.41`	`RoyK`	`no idea`
`09:51.50`	`*** join/#asterisk newl (n=newlook@203-59-91-217.dyn.iinet.net.au)`
`09:56.17`	`RoyK`	`:%s/newl//g`
`09:56.58`	`swm_[away]`	`~karma oej`
`09:56.58`	`jbot`	`oej has neutral karma`
`09:57.17`	`swm_[away]`	`~kharma`
`09:57.22`	`swm_[away]`	`~karma`
`09:57.22`	`jbot`	`swm_[away] has neutral karma`
`09:57.25`	`swm_[away]`	`~karma bkw`
`09:57.25`	`jbot`	`bkw has neutral karma`
`09:57.32`	`swm_[away]`	`~karma Junk-Y`
`09:57.32`	`jbot`	`junk-y has neutral karma`
`09:57.42`	`RoyK`	`~karma RoyK`
`09:57.42`	`jbot`	`royk has neutral karma`
`09:57.50`	`RoyK`	`~karma jbot`
`09:57.50`	`jbot`	`jbot has karma of 7`
`09:57.53`	`RoyK`	`jbot--`
`09:57.59`	`swm_[away]`	`~karma twisted`
`09:57.59`	`jbot`	`twisted has karma of 2`
`09:58.04`	`swm_[away]`	`~karma drumkilla`
`09:58.05`	`jbot`	`drumkilla has karma of 8`
`09:58.10`	`swm_[away]`	`~karma anthem`
`09:58.11`	`jbot`	`anthem has neutral karma`
`09:58.15`	`swm_[away]`	`~karma denon`
`09:58.15`	`jbot`	`denon has neutral karma`
`09:58.57`	`swm_[away]`	`~lart RoyK`
`09:59.25`	`swm_[away]`	`~lart RoyK`
`09:59.40`	`swm_[away]`	`~lart RoyK`
`10:01.40`	`RoyK`	`petefile == someone who likes pete? peat?`
`10:01.42`	`RoyK`	`:)`
`10:02.03`	`swm_`	`~jbot dict peatafile`
`10:02.08`	`swm_`	`~jbot dict petafile`
`10:02.17`	`swm_`	`~jbot petefile`
`10:02.22`	`swm_`	`~jbot dict petefile`
`10:02.29`	`RoyK`	`~swm_`
`10:02.39`	`RoyK`	`jbot: swm_?`
`10:02.41`	`swm_`	`~jbot dict pervert`
`10:02.41`	`RoyK`	`jbot: swm?`
`10:02.56`	`swm_`	`~jbot define royK`
`10:03.04`	`swm_`	`~jbot shutdown`
`10:03.06`	`RoyK`	`jbot: swm_ is the generic idiot`
`10:03.08`	`jbot`	`RoyK: okay`
`10:03.17`	`swm_`	`~jbot reboot`
`10:03.18`	`jbot`	`Not on your life cowboy :(, or are you using Window$?`
`10:03.25`	`swm_`	`~jbot kill`
`10:03.33`	`swm_`	`~jbot terminate`
`10:03.37`	`swm_`	`~jbot die`
`10:03.38`	`jbot`	`ACTION takes two shots to the head and crumples to the ground, lifeless.`
`10:03.57`	`swm_`	`Ohh IGNORE COMMAND. WOW`
`10:05.22`	`RoyK`	`<PROTECTED>`
`10:14.54`	`*** join/#asterisk andrownz (n=ecliptik@81.56.251.89)`
`10:16.24`	`andrownz`	`can anyone tel what's the best between a [sip client] and [skype/gtalk/...] just to talk to a friend that's also on his computer?`
`10:24.14`	`*** join/#asterisk oling (n=chatzill@p54B89C8B.dip0.t-ipconnect.de)`
`10:28.40`	`*** join/#asterisk pooh_ (n=hfwang@cust.15.241.adsl.cistron.nl)`
`10:32.11`	`andrownz`	`no one can tell??`
`10:34.06`	`pooh_`	`Heya RoyK`
`10:35.43`	`pooh_`	`so WHEN is there no sound at all on * channels? Festival and milliwatt are working that is it`
`10:35.47`	`pooh_`	`RTP streams?`
`10:35.57`	`pooh_`	`Setup is on LAN so no NAT`
`10:36.58`	`RoyK`	`pooh_: give me that login info again. i can take a look if you like :)`
`10:38.21`	`pooh_`	`RoyK: hold on`
`10:38.42`	`RoyK`	`brb. quick shower && 0xc0ffee`
`10:54.42`	`*** join/#asterisk ^X-works (n=r0x0r@host105-83.pool8261.interbusiness.it)`
`10:59.29`	`*** join/#asterisk queuetue (n=queuetue@toronto-HSE-ppp4122670.sympatico.ca)`
`11:11.46`	`*** join/#asterisk MarkSR (n=roisdmd@68.199.103.140)`
`11:19.32`	`*** join/#asterisk zotz (n=zotz@24.231.36.100)`
`11:21.00`	`*** join/#asterisk zuuluu (i=klineder@adsl-067-035-113-166.sip.bct.bellsouth.net)`
`11:21.41`	`zuuluu`	`is there a working cvs head mirror?`
`11:26.59`	`*** join/#asterisk Inv_arp (i=junya@adsl-156-145-65.mia.bellsouth.net)`
`11:34.17`	`*** join/#asterisk felipex (n=dsfdsf@85-18-136-75.fastres.net)`
`11:47.44`	`swm_`	`know any good applications pertaining to VoIP on the Nokia Symbian Series 60 Models`
`11:52.06`	`RoyK`	`pooh_: what hardware?`
`11:52.15`	`RoyK`	`pooh_: tried with cvs head?`
`11:57.38`	`*** join/#asterisk Baph (n=Dave@dirobertson.plus.com)`
`11:58.42`	`pooh_`	`RoYK: QUADBri from Junghanns.NET`
`11:59.00`	`RoyK`	`ic`
`11:59.08`	`RoyK`	`you told me on msg :P`
`11:59.22`	`pooh_`	`just for the record ;-)`
`11:59.29`	`RoyK`	`:P`
`12:02.17`	`*** join/#asterisk Tili (i=Tili@202-133-67-102-dialup.sat.net.pk)`
`12:05.33`	`*** join/#asterisk MRH2 (n=Mr_happy@fcirc-adsl.demon.co.uk)`
`12:06.01`	`MRH2`	`oi whats up with www.asterisk.org ?`
`12:06.53`	`MRH2`	`http://66.249.93.104/search?q=cache:Z77NU2BTL4QJ:www.asterisk.org/+&hl=en`
`12:07.13`	`*** join/#asterisk Mw3 (n=mw3@daisy.chains.ch)`
`12:07.14`	`MRH2`	`vs`
`12:07.20`	`MRH2`	`http://www.asterisk.org/`
`12:10.01`	`Tili`	`MRH2: asterisk.org is busted`
`12:10.18`	`MRH2`	`k`
`12:14.01`	`*** part/#asterisk Mw3 (n=mw3@daisy.chains.ch)`
`12:20.55`	`*** join/#asterisk coppice (n=chatzill@159.196.17.210.dyn.pacific.net.hk)`
`12:26.44`	`*** join/#asterisk coppice (n=chatzill@159.196.17.210.dyn.pacific.net.hk)`
`12:31.04`	`*** join/#asterisk zuuluu (i=klineder@adsl-067-035-113-166.sip.bct.bellsouth.net)`
`12:31.17`	`zuuluu`	`is asterisk dead?`
`12:31.39`	`coppice`	`its just taking a nap`
`12:31.58`	`swm_`	`anyone know any good applications pertaining to VoIP on the Nokia Symbian Series Models`
`12:32.47`	`coppice`	`most symbian phones can't use the DSP for the codecs, and lack the processing power on the applications ARM to do much VoIP work`
`12:32.56`	`zuuluu`	`seems their cvs and .org code is all old 1.0 stuff`
`12:33.44`	`coppice`	`oh, I see what you mean. the asterisk.org website. looks like someone screwed up a change`
`12:35.09`	`zuuluu`	`cvs.digium.com too`
`12:35.51`	`*** join/#asterisk maager (n=mager@ua-83-227-134-28.cust.bredbandsbolaget.se)`
`12:35.53`	`swm_`	`I have found 4 apps for the Symbian platform`
`12:36.11`	`coppice`	`what do they do?`
`12:36.34`	`InfraRed`	`stream porn`
`12:36.42`	`*** join/#asterisk maager (n=mager@ua-83-227-134-28.cust.bredbandsbolaget.se)`
`12:37.02`	`swm_`	`SIP VOiP Applications`
`12:37.23`	`swm_`	`I cannot seem to find Buzz2talk ... an actual download. back in 2004 it was released .`
`12:37.37`	`coppice`	`SIP over bluetooth?`
`12:37.40`	`*** join/#asterisk gambolputty (n=gambolpu@72.240.241.108)`
`12:38.13`	`swm_`	`SIP over GRMS`
`12:38.33`	`coppice`	`do you mean GPRS? SIP over GPRS is rather nasty`
`12:39.14`	`*** join/#asterisk yartelecom (n=no-email@as-ferg1.yartelecom.net)`
`12:39.31`	`swm_`	`Okay buzz2talk uses bluetooth over your phone`
`12:40.11`	`swm_`	`I have a 4 BT AP's around my house and use them for my PDA but I'm wondering if I can do anything interesting with them via my 3620 Nokia`
`12:40.45`	`swm_`	`(Class 1 Access points)`
`12:40.51`	`swm_`	`100 Ft Range on each of them`
`12:52.24`	`Tili`	`swm_: can u give me links to those apps you found. I think most of them are only for SIP text messaging and IM stuff and not VoIP usually`
`12:52.53`	`Tili`	`swm_: Most of mobile phones also dont support InputStream and outputStream at same time. i tried once building such app for BT`
`12:54.18`	`*** join/#asterisk Romik (n=romik_@212.143.5.146)`
`12:56.48`	`pooh_`	`With which * version is the latest mISDN compatible pls?`
`12:58.17`	`*** join/#asterisk CleanerX (n=nix@nat-ph3-wh.rz.uni-karlsruhe.de)`
`13:02.19`	`*** join/#asterisk magic_2 (n=magic_1@ndn-165-156-198.telkomadsl.co.za)`
`13:02.36`	`magic_2`	`lo all`
`13:05.39`	`*** join/#asterisk mithro (n=tim@p548E84D5.dip0.t-ipconnect.de)`
`13:07.32`	`*** join/#asterisk jhiver (n=jhiver@AStDenis-105-1-4-4.w193-253.abo.wanadoo.fr)`
`13:07.37`	`magic_2`	`how would i go about setting irc on my asterisk server`
`13:08.03`	`netsurfer`	`magic_2 - elaborate`
`13:09.15`	`magic_2`	`well read that i could use/setup irc on my asterisk`
`13:09.19`	`jhiver`	`hi all`
`13:10.12`	`netsurfer`	`magic_2 - <shrug> download and install BitchX or something`
`13:11.02`	`magic_2`	`excuse my ignorance but is bithx an irc client for asterisk`
`13:11.16`	`netsurfer`	`its an irc client for linux`
`13:11.33`	`magic_2`	`cause i was thinking that i could setup a irc chan for my cleint to speak tp me or my tech`
`13:11.38`	`magic_2`	`o i c`
`13:11.57`	`magic_2`	`i am currently using linux`
`13:12.11`	`magic_2`	`but not sure what the irc client is`
`13:12.31`	`jontow`	`xchat is what you're using now.`
`13:12.44`	`magic_2`	`makes sens thanx`
`13:12.47`	`jontow`	`:)`
`13:15.52`	`magic_2`	`is there a way that i could set something like that`
`13:18.31`	`jontow`	`of course -- but you need to do some reading`
`13:18.42`	`Chuji`	`magic_2 : You can host your own irc server or use a public one. Plenty of info on the web`
`13:18.50`	`Chuji`	`and has nothing to do with asterisk :)`
`13:27.09`	`*** join/#asterisk oling (n=chatzill@p54B8AF81.dip0.t-ipconnect.de)`
`13:29.40`	`oling`	`when i forward an incoming sip connection to an iax client, does asterisk decode and encode the audio?`
`13:31.09`	`*** join/#asterisk coppice (n=chatzill@24.192.17.210.dyn.pacific.net.hk)`
`13:32.05`	`*** join/#asterisk Gunnar (n=gunnar@34.80-203-209.nextgentel.com)`
`13:32.17`	`oling`	`do i lose audio quality?`
`13:41.26`	`*** join/#asterisk darkskiez (n=darkskie@host-84-9-237-20.bulldogdsl.com)`
`13:42.11`	`*** join/#asterisk IPFOX^^ (n=barny@cpc2-char1-5-0-cust96.sot3.cable.ntl.com)`
`13:54.12`	`pooh_`	`oling: encoding/decoding depends on the end peers`
`13:55.15`	`*** join/#asterisk kl_pl_01 (n=kl_pl_01@chello087207148187.chello.pl)`
`14:04.32`	`oling`	`pooh_: if both use the same codec it's not reencoded?`
`14:10.38`	`*** join/#asterisk mog_home (n=mogorman@user-24-236-84-48.knology.net)`
`14:17.00`	`pooh_`	`oling: nope, should be a bridged call`
`14:23.36`	`*** join/#asterisk tzafrir_laptop (n=tzafrir@62.90.10.53)`
`14:25.46`	`pooh_`	`how the heck to I prevent USB to be active (Bios no help) I want to disable USB grabbing an IRQ or be active at all`
`14:38.56`	`*** join/#asterisk jake1 (n=veristea@pool-68-163-227-40.bos.east.verizon.net)`
`14:46.22`	`*** join/#asterisk Qwell (n=north@24-50-66-194.vnnyca.adelphia.net)`
`14:53.39`	`*** part/#asterisk pooh_ (n=hfwang@cust.15.241.adsl.cistron.nl)`
`14:56.17`	`*** join/#asterisk brookshire (n=matt@esbrooks3.traveller.com)`
`14:59.42`	`*** join/#asterisk ZX81 (n=ZX81@222-153-100-242.jetstream.xtra.co.nz)`
`14:59.58`	*** join/#asterisk h4mm3r` (n=h4mm3r@85-18-14-10.fastres.net)
`15:00.49`	`fenlander`	`why is ZX81 sad?`
`15:01.40`	`*** join/#asterisk n0where (n=kc@q041140.ppp.asahi-net.or.jp)`
`15:02.44`	`ZX81`	`~ping`
`15:02.45`	`jbot`	`pong`
`15:03.38`	`*** join/#asterisk ZX81 (n=ZX81@222-153-100-242.jetstream.xtra.co.nz)`
`15:04.40`	`*** join/#asterisk RoyK (n=roy@cD9088681.inet.catch.no)`
`15:06.04`	`ZX81`	`~ping`
`15:06.05`	`jbot`	`pong`
`15:06.11`	`ZX81`	`~pong`
`15:06.12`	`jbot`	`wheeeeeeeeeeeeeeeeeeeeeeeeee!`
`15:06.17`	`ZX81`	`:(`
`15:08.05`	`*** join/#asterisk Craziman2 (n=Craziman@63.108.128.250)`
`15:09.26`	`Craziman2`	`I am running * 1.0.10 with Cisco 7960 phones. I am trying to get calls that time out from being parked to ring back with a different ring tone.`
`15:10.22`	`Craziman2`	`I tried creating a parkinglot context and having a s,1,SetVar(ALERT_INFO=<Bellcore-dr1>) but it didn't work`
`15:12.23`	`*** join/#asterisk Veto_laptop (i=mdkuser@cpe-66-69-38-192.satx.res.rr.com)`
`15:12.39`	`*** join/#asterisk CodeBot (i=stjohn@212.68.221.41.brutele.be)`
`15:14.31`	`*** join/#asterisk kFuQ (n=somedude@c-67-185-114-199.hsd1.wa.comcast.net)`
`15:19.14`	`*** join/#asterisk CodeBot (i=stjohn@212.68.221.41.brutele.be)`
`15:19.17`	`*** join/#asterisk pa (n=Paolo@unaffiliated/pa)`
`15:22.28`	`Qwell`	`1.0.10 was released?`
`15:23.34`	`Craziman2`	`qwell Connected to Asterisk CVS-v1-0-10/08/05-13:11:17`
`15:23.42`	`Qwell`	`hmm, no`
`15:23.58`	`Qwell`	`Thats cvs stable, v1-0, 10/08/05`
`15:24.45`	`Craziman2`	`Sorry... misread it.`
`15:26.42`	`brookshire`	`but technically that was correct.. heh`
`15:26.51`	`brookshire`	`however 1.2 will probably be the next release`
`15:26.54`	`*** join/#asterisk Wi_Fi (n=OUT@c-24-127-12-85.hsd1.ca.comcast.net)`
`15:27.11`	`*** join/#asterisk wolfson (n=hehe@usr-kdh-208-6-58-26.beachlink.com)`
`15:27.14`	`Craziman2`	`hey`
`15:27.59`	`brookshire`	`hi`
`15:28.11`	`file[laptop]`	`bonjour`
`15:28.16`	`brookshire`	`hey file`
`15:28.22`	`file[laptop]`	`hiiiiii`
`15:32.49`	`*** join/#asterisk CodeBot (i=stjohn@212.68.221.41.brutele.be)`
`15:33.41`	`RoyK`	`heh. just got an email from a quite pissed off customer after having called inmersat three times a few seconds and then getting billed about $35 for it :)`
`15:34.00`	`SkramX`	`Thats not good`
`15:34.03`	`RoyK`	`calling inmersat hsd isn't really budget stuff`
`15:34.18`	`Qwell`	`why would they even call there?`
`15:34.23`	`RoyK`	`no idea`
`15:34.33`	`SkramX`	`what is that`
`15:34.35`	`RoyK`	`but he did, three times in under 12 hours`
`15:34.37`	`SkramX`	`:D`
`15:34.38`	`*** join/#asterisk tzafrir (n=tzafrir@local.xorcom.com)`
`15:34.46`	`RoyK`	`SkramX: satellite phones`
`15:34.52`	`RoyK`	`hsd is high-speed data`
`15:34.53`	`Qwell`	`inmerset is like...yeah...middle of freaking nowhere`
`15:34.55`	`SkramX`	`RoyK: Oh.`
`15:34.57`	`file[laptop]`	`RoyK: and you explained to him how expensive it is?`
`15:34.58`	`RoyK`	`which is extra costy`
`15:34.59`	`Qwell`	`all over the world though`
`15:35.05`	`RoyK`	`file[laptop]: yes`
`15:35.12`	`SkramX`	`Ickys.`
`15:35.15`	`file[laptop]`	`and then he still wanted a credit?`
`15:35.52`	`RoyK`	`file[laptop]: i've just sent the answer to my boss for control. I'm not sure how boss wants the case handled`
`15:36.06`	`file[laptop]`	`ah`
`15:36.17`	`Qwell`	`I wouldn't credit any of it. :p`
`15:36.26`	`Qwell`	`if I were to though, it'd be the first one`
`15:36.37`	`RoyK`	`if boss wants to credit the customer for dialing a number he possibly didn't know was that expensive, well that's up to him`
`15:36.55`	`*** join/#asterisk gonzo- (n=gonzo@web.portaone.com)`
`15:36.55`	`SkramX`	`RoyK: How much do you all charge for it?`
`15:36.56`	`RoyK`	`it's only like NOK 210 (eur 25) or so`
`15:37.07`	`RoyK`	`about nok 70/min`
`15:37.17`	`SkramX`	`thats about 45USD.`
`15:37.27`	`Qwell`	`SkramX: 25 eur is like 30 usd`
`15:37.40`	`Qwell`	`I just got a 25eur paypal the other day, heh`
`15:37.41`	`SkramX`	`Really? Okay.`
`15:37.49`	`Qwell`	`if its more, I'd be kinda pissed...`
`15:38.03`	`RoyK`	`NOK 210 is USD32,-`
`15:38.06`	`SkramX`	`25 Euros = 30.36 U.S. dollars`
`15:38.08`	`SkramX`	`Yeah.`
`15:38.35`	`RoyK`	`bloody expensive`
`15:38.41`	`SkramX`	`Qwell: Yeah, but paypal takes a nice chunk sometimes; I wish they posted their exchange rates.`
`15:38.48`	`RoyK`	`but then, who needs high-speed data transfer in the himalayas?`
`15:39.42`	`file[laptop]`	`SkramX: they have a calculator`
`15:39.42`	`*** part/#asterisk Craziman2 (n=Craziman@63.108.128.250)`
`15:39.57`	`SkramX`	`hehe`
`15:40.40`	`file[laptop]`	`like for Paypal... 25 euros is...`
`15:41.04`	`Qwell`	`SkramX: dunno, the exchange was free to do`
`15:41.09`	`file[laptop]`	`$29.55 USD`
`15:42.30`	`*** join/#asterisk CodeBot (i=stjohn@212.68.221.41.brutele.be)`
`15:47.02`	`*** join/#asterisk Badenser (n=user@191-60-124-83.dsl.3u.net)`
`15:47.37`	`*** join/#asterisk asterisk99 (n=chatzill@modemcable169.194-130-66.mc.videotron.ca)`
`15:48.31`	`Badenser`	`Help! What does " chan_sip.c:6865 handle_response: Failed to authenticate on INVITE to ..." mean? What did I do wrong?`
`15:48.46`	`af_`	`may I stuff two tdm400 in a box without troubles?`
`15:48.50`	`Qwell`	`af_: sure`
`15:48.51`	`asterisk99`	`anysose ere usig Gentoo? i cann;t figure out how to have zaptel to load after a reboot`
`15:48.52`	`RoyK`	`Badenser: wrong password?`
`15:48.53`	`Qwell`	`usually, anyhow`
`15:48.58`	`RoyK`	`af_: prolly`
`15:49.02`	`Qwell`	`asterisk99: lemme see how I do it..one sec`
`15:49.15`	`af_`	`I think to manage 6 fxo in a box`
`15:49.21`	`RoyK`	`asterisk99: modprobe.conf iiirc`
`15:49.31`	`Badenser`	`RoyK, no, otherwise this would be another error message. And I successfully registered etc. ... the pw is correct`
`15:49.44`	`Qwell`	`yeah, modprobe.conf indeed`
`15:49.56`	`RoyK`	`Badenser: hehe. not running 1.0.x or anything?`
`15:50.02`	`Qwell`	`asterisk99: make install on zaptel should have added them to that file for you`
`15:50.22`	`asterisk99`	`Qwell: moodprobe loads it OK.... but after a reboot, it woo;t reload automatically`
`15:50.28`	`Badenser`	`RoyK, Asterisk 1.0.7-BRIstuffed-0.2.0-RC7k built by root@boomtime on a i686 running Linux`
`15:50.37`	`RoyK`	`bingo`
`15:50.50`	`RoyK`	`there's a bad nonce handling in asterisk`
`15:51.02`	`Badenser`	`means .. ?`
`15:51.48`	`asterisk99`	`Qwell: is there a file that linus referenced during OS boot to load the drivers?`
`15:52.52`	`asterisk99`	`Qwell: Egad... that is bad english ... Linus => Linux ... referenced => references`
`15:53.14`	`RoyK`	`Badenser: see http://bugs.digium.com/view.php?id=2746`
`15:53.34`	`RoyK`	`Badenser: the patch attached there works`
`15:53.55`	`Badenser`	`RoyK, thanks ...`
`15:53.56`	`RoyK`	`Badenser: iirc this bug is still not fixed`
`15:54.07`	`Badenser`	`sigh means compiling .... uuhhhh`
`15:54.08`	`Badenser`	`;-)`
`15:54.13`	`RoyK`	`i paid for having that bug written......`
`15:54.32`	`RoyK`	`Badenser: i could send you a patched-up tree if you like`
`15:54.53`	`RoyK`	`with that patch plus a lot of other stuff, including a rather nasty RTP/UDP port leak`
`15:55.03`	`RoyK`	`s/a ra/a patch to a ra/`
`15:55.10`	`Badenser`	`RoyK, thanks ... mh, will try it first (using Debian sources etc.)`
`15:55.21`	`RoyK`	`Badenser: don't do that`
`15:55.36`	`Badenser`	`?`
`15:55.47`	`RoyK`	`Badenser: you still need to get that RTP leak fixed if you want to use it with any volume`
`15:56.01`	`RoyK`	`do you need bristuff?`
`15:56.15`	`Badenser`	`ehm .. what was bristuff again ... ?`
`15:56.19`	`*** part/#asterisk Dr_Ray (i=drray@dsl254-011-243.sea1.dsl.speakeasy.net)`
`15:56.26`	`Badenser`	`I just did apt-get install asterisk :-)`
`15:56.31`	`RoyK`	`Badenser: drivers for hfc pci plus a lot of other stuff`
`15:56.40`	`RoyK`	`Badenser: asterisk is constant work in progress`
`15:56.46`	`RoyK`	`better get the bread when it's warm`
`15:56.52`	`Badenser`	`;-)`
`15:56.59`	`Badenser`	`nice said`
`15:57.44`	`RoyK`	`also, don't use bristuff unless you need it`
`15:57.49`	`Badenser`	`or is it in the cvs yet?`
`15:57.58`	`RoyK`	`bristuff?`
`15:58.00`	`Badenser`	`could do a checkout of warm bread`
`15:58.06`	`Badenser`	`no, these patches`
`15:58.09`	`RoyK`	`no`
`15:58.11`	`RoyK`	`they're not`
`15:58.20`	`RoyK`	`but I think most of it is fixed in CVS HEAD`
`15:58.24`	`RoyK`	`not in 1.0, though`
`15:58.38`	`RoyK`	`will you be using mysql integration or something?`
`15:58.41`	`*** join/#asterisk mhnoyes (n=mhnoyes@user-2ivfim6.dialup.mindspring.com)`
`15:58.44`	`Badenser`	`no`
`15:58.53`	`RoyK`	`just a small install?`
`15:59.01`	`Badenser`	`just need SIP, IAX, voicebox ... and maybe isdn in future`
`15:59.35`	`RoyK`	`isdn might be misdn, zaptel, isdn4linux, capi and the forth-coming sangoma native driver.....`
`15:59.40`	`RoyK`	`isdn has lots of different drivers`
`15:59.48`	`Badenser`	`sangoma ... never heard of`
`15:59.53`	`RoyK`	`dot com`
`15:59.58`	`RoyK`	`canadian co`
`15:59.59`	`Badenser`	`I would use capi`
`15:59.59`	`*** join/#asterisk wunderkin (i=kev@12-219-162-233.client.mchsi.com)`
`16:00.05`	`RoyK`	`Badenser: what hardware?`
`16:00.06`	`Badenser`	`and chan_capi`
`16:00.12`	`Badenser`	`AVM FritzCard`
`16:00.15`	`RoyK`	`ah`
`16:00.18`	`RoyK`	`right`
`16:00.40`	`RoyK`	`also Herr Junghanns' code`
`16:00.44`	`RoyK`	`as with bristuff`
`16:01.35`	`Badenser`	`yes ... Junghanns (long ago I tested it once ...)`
`16:02.15`	`Badenser`	`on the bug page ... it is said, that it is hard to reproduce ...`
`16:02.34`	`Badenser`	`mh, but I can reproduce it deterministic ..`
`16:02.35`	`RoyK`	`what bug?`
`16:02.52`	`Badenser`	`Failed to authenticate on INVITE to`
`16:02.56`	`RoyK`	`yes`
`16:02.57`	`Badenser`	`the thing you posted`
`16:03.05`	`RoyK`	`some say it's hard to reproduce`
`16:03.15`	`Badenser`	`but its absolutely easy for me`
`16:03.24`	`RoyK`	`but I've already sent my cvs asterisk tree to another guy to fix the problem at his place`
`16:03.24`	`Badenser`	`just try to call out ... booom`
`16:03.29`	`RoyK`	`yes`
`16:03.37`	`RoyK`	`but then it only happens for some clients`
`16:03.40`	`RoyK`	`afaics`
`16:04.28`	`Badenser`	`the probem seems to be: I have 3 numbers in one account at my SIP provider (and so: same domain)`
`16:04.40`	`Badenser`	`registering isnt a problem ... and one number works ...`
`16:04.48`	`Badenser`	`but the other two not`
`16:06.03`	`*** join/#asterisk CodeBot (i=stjohn@212.68.221.41.brutele.be)`
`16:07.45`	`RoyK`	`Badenser: http://karlsbakk.net/asterisk/asterisk-1.0.7-briiz.no.tar.gz`
`16:07.54`	`RoyK`	`Badenser: that might solve your problem`
`16:08.06`	`Badenser`	`thanks`
`16:08.09`	`Badenser`	`will check it`
`16:08.35`	`RoyK`	`that also fixes that nasty rtp leak`
`16:08.59`	`Badenser`	`and if you once need someone to reproduce the problem in a deterministic way, just call :-)`
`16:09.24`	`*** join/#asterisk CodeBot (i=stjohn@212.68.221.41.brutele.be)`
`16:09.41`	`RoyK`	`Badenser: just file a new bug with the info and add a note about that being a follow-up for my bug`
`16:09.51`	`RoyK`	`Badenser: it's pretty bad they don't fix bugs in -stable`
`16:10.06`	`RoyK`	`s/pretty/bloody/`
`16:11.21`	`Badenser`	`maybe I open the bug in Debian's system; maybe the "preassure" is a bit higher then ...`
`16:12.09`	`*** join/#asterisk CodeBot (i=stjohn@212.68.221.41.brutele.be)`
`16:12.09`	`RoyK`	`Badenser: doubt it`
`16:12.18`	`RoyK`	`Badenser: i'd rather use bugs.digium.com`
`16:14.18`	`*** join/#asterisk CodeBot (i=stjohn@212.68.221.41.brutele.be)`
`16:16.06`	`*** join/#asterisk zamsler (n=zamsler@c-67-184-243-204.hsd1.il.comcast.net)`
`16:16.45`	`*** join/#asterisk CodeBot (i=stjohn@212.68.221.41.brutele.be)`
`16:18.46`	`*** join/#asterisk CodeBot (i=stjohn@212.68.221.41.brutele.be)`
`16:21.08`	`Badenser`	`RoyK, thanks for help ... will check it in a calm hour`
`16:21.09`	`*** part/#asterisk Badenser (n=user@191-60-124-83.dsl.3u.net)`
`16:23.33`	`*** join/#asterisk CodeBot (i=stjohn@212.68.221.41.brutele.be)`
`16:25.01`	`*** join/#asterisk ManxPower (n=eric@1Cust3323.an7.dfw28.da.uu.net)`
`16:26.50`	`*** join/#asterisk pooh_ (n=hfwang@cust.15.241.adsl.cistron.nl)`
`16:30.09`	`*** join/#asterisk marc324 (n=marc3234@206-248-132-57.dsl.teksavvy.com)`
`16:39.00`	`*** join/#asterisk cio (n=na@adsl-072-149-159-016.sip.bhm.bellsouth.net)`
`16:39.15`	`cio`	`Hi all. Is there somewhere I can set the default no-caller id text to something besides 'asterisk'?`
`16:39.31`	`*** join/#asterisk Rav1974 (n=r@ool-457a17a9.dyn.optonline.net)`
`16:45.45`	`Rav1974`	`I have a CAC 600 + T1 card. I can't get the trunks setup in asterisk. (For incoming & outgoing lines) please help`
`16:46.42`	`pooh_`	`sorry, no knowledge of CAC600`
`16:47.05`	`Rav1974`	`:( poohpy cock`
`16:47.10`	`Rav1974`	`sorry bad pun`
`16:47.31`	`pooh_`	`Which T1 card?`
`16:47.38`	`pooh_`	`what card ...`
`16:47.41`	`Rav1974`	`TE110p`
`16:47.54`	`pooh_`	`What is a CAC600?`
`16:47.59`	`Rav1974`	`its setup correctly, but I dont have any instructions`
`16:48.10`	`Rav1974`	`CAC/ADIT 600 is a channel bank`
`16:48.14`	`pooh_`	`ah...`
`16:48.25`	`Rav1974`	`I have a 1 fxo card & 2 fxs cards`
`16:48.29`	`pooh_`	`lsmod tell you the driver(s) are loaded ?`
`16:48.36`	`Rav1974`	`all zapata & zaptel conf files look good`
`16:48.42`	`Rav1974`	`i can ring on the fxs cards`
`16:48.49`	`Rav1974`	`from my sip phone`
`16:48.54`	`Rav1974`	`& vice versa`
`16:48.59`	`pooh_`	`but....?`
`16:49.20`	`Rav1974`	`the outgoing doesn't work`
`16:49.38`	`Rav1974`	`I'm not very well versed in linux/asterisk or AMP`
`16:49.54`	`pooh_`	`How doe syour dial command look like ?`
`16:51.31`	`Rav1974`	`pooh_: I actually took an easy way by installing AAH 1.5 so I'm not sure where to see the dialplan`
`16:51.41`	`pooh_`	`ewwwwww`
`16:51.54`	`Rav1974`	`sorry, but I think its the best`
`16:51.56`	`pooh_`	`should be at '/etc/asterisk/exensions.conf`
`16:52.04`	`Rav1974`	`not everyone is an expert`
`16:52.12`	`pooh_`	`people may have other thoughts over here ;-)`
`16:52.49`	`Rav1974`	`do you want me to paste here or at pastebin?`
`16:52.57`	`pooh_`	`pastebin is ok`
`16:53.11`	`pooh_`	`include zapata and zaptel`
`16:53.28`	`pooh_`	`make sure no private stuff is in there`
`16:53.35`	`Rav1974`	`k`
`16:54.53`	`cio`	`hrm...`
`16:55.07`	`ManxPower`	`Rav1974, Not many people can help you with A@H`
`16:55.11`	`pooh_`	`morning ;-)`
`16:55.26`	`ManxPower`	`'morning, pooh_`
`16:55.26`	`Rav1974`	`pooh_: http://pastebin.com/pastebin.php?dl=388236`
`16:55.27`	`pooh_`	`Heya ManxPower, correct, just giving it a try here`
`16:55.30`	`cio`	`I just realized I'm not getting any caller id info on my new TDM400P with CVS Zaptel. Anybody know how to troubleshoot this? My /etc/asterisk/zap...conf has usecallerid=yes..`
`16:55.35`	`*** join/#asterisk adker (n=adker@67-51-237-234.dsl1.glv.ny.frontiernet.net)`
`16:55.49`	`ManxPower`	`cio, and callerid=asreceived`
`16:56.54`	`*** join/#asterisk CodeBot (i=stjohn@212.68.221.41.brutele.be)`
`16:57.24`	`cio`	`hmm... No luck... Weird...`
`16:57.50`	`Rav1974`	`pooh_: hope you can help :(`
`16:57.54`	`ManxPower`	`cio, and you have both lines BEFORE the channel => lines?`
`16:58.16`	`pooh_`	`Rav1974: What does the CLI tell you when you make a trunk call ?`
`16:58.29`	`pooh_`	`set verbose 20`
`16:58.32`	`blitzrage`	`morning all`
`16:58.36`	`pooh_`	`morn`
`17:00.17`	`pooh_`	`Rav1974: looks like a config issue`
`17:00.43`	`Rav1974`	`pooh: Verbosity was 3 and is now 20`
`17:00.44`	`Rav1974`	`<PROTECTED>`
`17:00.44`	`Rav1974`	`<PROTECTED>`
`17:01.04`	`Rav1974`	`pooh_: thats exactly what it is.`
`17:01.45`	`ManxPower`	`'morning blitzrage`
`17:01.53`	`blitzrage`	`ManxPower: how goes?`
`17:02.11`	`pooh_`	`Zap/21?`
`17:02.11`	`ManxPower`	`blitzrage, My ISP goes down more often than Lynda Lovelace`
`17:02.17`	`blitzrage`	`ManxPower: LOL!`
`17:02.35`	`*** join/#asterisk CodeBot (i=stjohn@212.68.221.41.brutele.be)`
`17:02.46`	`kl_pl_01`	`Hi, has anybody tried to push T1 traffic (betwen two T1 devices) over E1 link (SDH) ?`
`17:03.00`	`pooh_`	`# channel 21, WCT1, unhandled for now`
`17:03.25`	`ManxPower`	`blitzrage, I managed to get my Cisco to connect to a dialup ISP to at least get SOMETHING running. Whoever at Cisco decided to default Ser0 in async mode to 8 data bits, no parity and TWO stop bits should be shot.`
`17:03.26`	`pooh_`	`Rav1974: Time to consult AAH fora`
`17:03.35`	`Rav1974`	`ok :)`
`17:03.36`	`cio`	`ManxPower: Yep.`
`17:03.37`	`cio`	`Weird.`
`17:03.40`	`cio`	`It was working -`
`17:03.59`	`Rav1974`	`pooh_: where is aah forum? I didn't see one`
`17:04.06`	`ManxPower`	`cio, having too low/too high of rxgain can make callerid break`
`17:04.15`	`cio`	`There's nothing in /etc/zaptel.conf that would affect callerid is there?`
`17:04.22`	`cio`	`No, haven't messed with the rxgain at all.`
`17:05.12`	`cio`	`Everything just says "asterisk" ...`
`17:05.20`	`cio`	`It doesn't even log the callerid in the cdr logs.`
`17:05.27`	`*** join/#asterisk MikeJ[Laptop] (n=ircatjer@adsl-69-209-137-137.dsl.sfldmi.ameritech.net)`
`17:05.29`	`cio`	`Wonder if the feature got disabled somehow at the telco?`
`17:05.42`	`ManxPower`	`cio, "asterisk" means "I didn't get any callerid"`
`17:05.49`	`blitzrage`	`ManxPower: TWO stop bits?!`
`17:05.57`	`blitzrage`	`ManxPower: now that's fucked`
`17:05.57`	`ManxPower`	`blitzrage, Yeah.`
`17:06.01`	`Qwell`	`blitzrage: y0, how's Anaheim?`
`17:06.03`	`ManxPower`	`blitzrage, yeah.`
`17:06.10`	`blitzrage`	`Qwell: r0ckin`
`17:06.11`	`cio`	`Yea, that's what started me looking into it. I was trying to figure out a way to change that text to "No Caller Id" or something besides "asterisk", then I realized I wasn't getting any caller id?!?`
`17:06.30`	`Qwell`	`blitzrage: happen to see my question in #astricon earlier? :)`
`17:06.50`	`blitzrage`	`Qwell: ugh.... no -- let me look :)`
`17:07.16`	`cio`	`Any other suggestions? Thanks for the help, btw.`
`17:09.02`	`cio`	`I think it's on the telco side.`
`17:10.05`	`cio`	`On a related subject, is there a way to change the default text when there is no caller id to something besides "asterisk"?`
`17:11.32`	`*** join/#asterisk CodeBot (i=stjohn@212.68.221.41.brutele.be)`
`17:11.38`	`ManxPower`	`blitzrage, apparently the ISP uses Linux as their routers and they keep crashing`
`17:11.50`	`ManxPower`	`I'm tempted to just buy the guy a cisco`
`17:12.09`	`tzanger`	`ManxPower: who's that`
`17:12.18`	`tzanger`	`we use linux for routers and it works very well`
`17:12.27`	`ManxPower`	`tzafrir, the two guy wireless ISP I use.`
`17:12.30`	`Qwell`	`meh, my router crashes quite a bit these last few weeks`
`17:14.09`	`*** join/#asterisk pa (n=Paolo@unaffiliated/pa)`
`17:14.18`	`ManxPower`	`He seems like the typical "scrounge old hardware" geek, which I'm SO over.`
`17:14.24`	`*** join/#asterisk CodeBot (i=stjohn@212.68.221.41.brutele.be)`
`17:14.59`	`*** join/#asterisk quasi2k (n=Marcus@dsl-217-17-22-122.teliko.net)`
`17:15.01`	`ManxPower`	`His network diagram looks like the plate of spagetti I had for dinner last night.`
`17:15.12`	`quasi2k`	`hi`
`17:15.37`	`quasi2k`	`some german asterisk pros in here?`
`17:15.54`	`tzanger`	`ahh`
`17:16.06`	`tzanger`	`yes there is a difference between linux rouers and linux routers on crap`
`17:16.16`	`tzafrir`	`quasi2k, try #asterisk-de (is there such a channel?)`
`17:16.34`	`*** join/#asterisk CodeBot (i=stjohn@212.68.221.41.brutele.be)`
`17:17.18`	`quasi2k`	`nope`
`17:18.05`	`*** join/#asterisk terracon (n=tc@CPE0050da608e99-CM0012254076d6.cpe.net.cable.rogers.com)`
`17:18.26`	`ManxPower`	`The guy doesn't even run a routing protocol on his network`
`17:18.56`	`Qwell`	`silly people...think they can make a whole ISP and not know what they're doing`
`17:19.17`	`ManxPower`	`Qwell, His whole operation reminds me of the first ISP I started.`
`17:19.21`	`Qwell`	`haha`
`17:19.27`	`ManxPower`	`Under funded, under staffed, junk equipment, little experience`
`17:19.33`	`quasi2k`	`does anyone use hfc and avm combination`
`17:20.09`	`quasi2k`	`for s0 intern line and avm extern`
`17:20.11`	`ManxPower`	`If I was planning on staying in this miserable excuse for a town I'd try to buy him out.`
`17:20.27`	`Qwell`	`ManxPower: heh`
`17:23.40`	`*** join/#asterisk hhrp (i=ma_msk@213.165.211.37)`
`17:24.16`	`hhrp`	`hi`
`17:24.33`	`*** part/#asterisk darkskiez (n=darkskie@host-84-9-237-20.bulldogdsl.com)`
`17:25.13`	`hhrp`	`where can i find info on how correctly configure oh323.conf, i need to be able to receive a call from h323 gw and forward it to an extention in sip.conf`
`17:25.41`	`ManxPower`	`Pics of the damage Katrina caused to my boss's mother's house (including many pipe organs) http://www.demajo.net/organ/katrina/index.htm`
`17:26.59`	`marc324`	`ne1 know how to download j2se from shell?`
`17:27.42`	`Qwell`	`marc324: wget?`
`17:27.49`	`Qwell`	`lynx?`
`17:28.15`	`marc324`	`the files are behind a form`
`17:28.18`	`SkramX`	`marc324: what distro?`
`17:28.33`	`SkramX`	`you may want to use ports/portage/a binary`
`17:28.38`	`SkramX`	`like an rpm, etc`
`17:29.07`	`Qwell`	`you need to download the file with portage`
`17:29.18`	`Qwell`	`download it on your own, that is`
`17:29.59`	`marc324`	`https://sdlcweb4d.sun.com/ECom/EComActionServlet;jsessionid=3E73F1F8C1684E635AC3886090081F41`
`17:30.13`	`marc324`	`http://java.sun.com/j2ee/1.4/download.html#sdk`
`17:30.27`	`SkramX`	`jaja. THIS WEBSITE IS DEDICATED TO OUR LOUISIANA POLITICIANS, INCLUDING THE ORLEANS LEVEE BOARD, THE US ARMY CORPS OF ENGINEERS, AND THE CONTRACTOR WHO BUILT THE 17th STREET CANAL LEVEE. MAY THEY SPEND ALL ETERNITY IN HELL LISTENING TO KEN GRIFFIN PLAY THE 'BEER BARREL POLKA' ON A HAMMOND B-3."`
`17:30.32`	`SkramX`	`*haha.`
`17:30.58`	`hhrp`	`where can i find info on how to configure an incoming h323 gw?`
`17:31.09`	`marc324`	`wget is only when you know the url.`
`17:31.19`	`*** join/#asterisk oej (n=Olle@dsl001-136-130.lax1.dsl.speakeasy.net)`
`17:31.22`	`SkramX`	`marc324: what is the "form"`
`17:31.30`	`SkramX`	`whats the link, ill figure it out for ya.`
`17:31.48`	`marc324`	`http://java.sun.com/j2ee/1.4/download.html#sdk`
`17:32.48`	`*** join/#asterisk brc_ (n=Brian@pdpc/supporter/basic/brc)`
`17:33.34`	`SkramX`	`at a bash prompt?`
`17:33.38`	`ManxPower`	`SkramX, nod`
`17:33.48`	`marc324`	`yes`
`17:33.49`	`InfraRed`	`hhrp: tried the voip-info.org?`
`17:33.54`	`SkramX`	`$/# lynx http://tinyurl.com/cvud8`
`17:34.33`	`SkramX`	`it should open a little "window" asking if you want to download the file`
`17:34.39`	`*** part/#asterisk pooh_ (n=hfwang@cust.15.241.adsl.cistron.nl)`
`17:34.42`	`SkramX`	`I assumed you want english and for the linux platfor?`
`17:34.46`	`SkramX`	`*platform`
`17:35.36`	`SkramX`	`marc324: working?`
`17:36.20`	`InfraRed`	`hhrp: also look into transcoding`
`17:37.06`	`*** join/#asterisk chet-- (n=chet@cpe-065-190-056-004.triad.res.rr.com)`
`17:37.50`	`hhrp`	`i cant find any decent info on oh323.conf file, infrared`
`17:38.07`	`hhrp`	`i know how to config gw and end point in sip.conf no prob`
`17:38.13`	`InfraRed`	`just a matter of interest, why are you using h323?`
`17:38.15`	`chet--`	`whats the concensus on openpbx?`
`17:38.34`	`marc324`	`skramx- works thx`
`17:38.43`	`hhrp`	`network where my calls are coming from uses h323`
`17:39.15`	`InfraRed`	`Alternative implementation of H.323 protocol support for Asterisk PBX.`
`17:39.15`	`InfraRed`	`WWW: http://www.inaccessnetworks.com/ian/projects/asterisk-oh323/`
`17:39.21`	`InfraRed`	`is this what you're using?`
`17:39.42`	`hhrp`	`i created a context in oh323.conf [gw] .. put ip etc but how to specify to forward incoming call from that gw to a sip extention?`
`17:39.48`	`hhrp`	`yes`
`17:40.27`	`InfraRed`	`i am talking out of my arse here but it could be useful`
`17:40.36`	`InfraRed`	`is it accepting the call on h323?`
`17:40.41`	`hhrp`	`yes`
`17:40.50`	`hhrp`	`i have samples`
`17:40.53`	`InfraRed`	`you running h323 debug or some such command?`
`17:41.05`	`hhrp`	`and in sample it has all-prefixes`
`17:41.27`	`hhrp`	`i dont understand what alias= is for in there`
`17:41.36`	`*** join/#asterisk acidfoo (n=acidfoo@66.11.160.156)`
`17:41.44`	`hhrp`	`im in console getting output`
`17:42.39`	`*** join/#asterisk DukeOfURL (n=chatzill@67-41-211-223.brbn.qwest.net)`
`17:43.18`	`hhrp`	`it starts a call at all-prefixes`
`17:44.23`	`*** join/#asterisk mog_home (n=mogorman@user-24-236-84-48.knology.net)`
`17:45.51`	`SplasPood`	`After a Dial() when it sets DIALSTATUS to ANSWER, is there any way to determine which SIP/???? answered the call (assuming I'm dialing multiple channels at once)`
`17:46.08`	`*** join/#asterisk newmember (n=newmembe@S010600a0c93dce87.cg.shawcable.net)`
`17:50.29`	`*** join/#asterisk newl (n=newlook@203-59-214-216.dyn.iinet.net.au)`
`17:56.56`	`hhrp`	`does anyone have experience configuring oh323.conf?`
`17:57.04`	`SkramX`	`marc324: sure.`
`17:57.13`	`SkramX`	`where can I email you the invoice?`
`17:57.15`	`SkramX`	`haha`
`17:57.31`	`hhrp`	`you talking to me?:)`
`17:57.47`	`SkramX`	`hhrp: http://www.voip-info.org/tiki-index.php?page=oh323.conf`
`17:57.49`	`*** join/#asterisk r0d3nt (i=nobody@wsip-24-234-241-145.lv.lv.cox.net)`
`17:58.01`	`hhrp`	`have probs cant figure how to make it work`
`17:58.11`	`hhrp`	`it has so little description no examples`
`17:58.37`	`SkramX`	`hhrp: sorry.`
`17:58.49`	`SkramX`	`Never used h323`
`17:59.08`	`hhrp`	`i got gws configured but i cant figure out what do i need to put in order for it to understand that an incoming call has to be forwarded to a particular extn`
`18:01.25`	`SkramX`	`hhrp:`
`18:01.26`	`SkramX`	`; Set the default context of H.323 calls.`
`18:01.26`	`SkramX`	`;`
`18:01.26`	`SkramX`	`context=voip-h323`
`18:04.54`	`*** join/#asterisk darby_t (n=tom@dmv175.neoplus.adsl.tpnet.pl)`
`18:05.00`	`*** join/#asterisk Xen^ (i=linux@202.5.131.8)`
`18:06.05`	`*** join/#asterisk n4y (n=tmalkut@fw.orasoft.net.pl)`
`18:08.15`	`*** join/#asterisk shanky (n=shanky@85.137.127.142)`
`18:08.44`	`shanky`	`good afternoon`
`18:09.26`	`SkramX`	`Hello.`
`18:17.36`	`*** join/#asterisk tzafrir_laptop (n=tzafrir@local.xorcom.com)`
`18:18.20`	`*** join/#asterisk Assid (n=assid@203.115.64.57)`
`18:20.49`	`*** join/#asterisk rajiv (n=irc@gentoo/developer/rajiv)`
`18:23.23`	`*** join/#asterisk darby_d (n=tom@dno226.neoplus.adsl.tpnet.pl)`
`18:23.31`	`*** join/#asterisk mithro (n=tim@p548E84D5.dip0.t-ipconnect.de)`
`18:24.50`	`*** join/#asterisk darby_t (n=tom@dno226.neoplus.adsl.tpnet.pl)`
`18:27.28`	`hhrp`	`and how would it know what exten it is supposed to go to?`
`18:27.45`	`hhrp`	`like in sip you for regiter = .... /exten`
`18:27.56`	`hhrp`	`what do you do in h323.conf?`
`18:29.07`	`bjohnson`	`register has nothing to with exten`
`18:29.18`	`bjohnson`	`register tells another server what IP address you have`
`18:30.54`	`*** join/#asterisk mhnoyes (n=mhnoyes@user-2ivfj1j.dialup.mindspring.com)`
`18:32.23`	`hhrp`	`when you use sip and regiter you have /exten parameter`
`18:32.58`	`hhrp`	`so when a call comes ot that sip gw you registered it knows what exten to forward it to in context you define`
`18:33.20`	`hhrp`	`so why are you telling me it has nothing to do with exten`
`18:33.25`	`*** join/#asterisk MrMAGO (n=mglucksm@pdpc/supporter/sustaining/MrMAGO)`
`18:34.06`	`*** join/#asterisk SwK (i=pmmzwj@12-219-144-126.client.mchsi.com)`
`18:34.25`	`hhrp`	`i need all incoming calls on oh323 terminate to a particular exten and i cant figure outhow to do it`
`18:34.51`	`MrMAGO`	`hello... can someone help me please? in astcc, how would I specify a route for a 7 digit number? ^XXXXXXX$ ?`
`18:35.28`	`netsurfer`	`MrMAGO`
`18:37.12`	`netsurfer`	`nevermind =)`
`18:37.24`	`Qwell`	`MrMAGO: something like`
`18:37.34`	`Qwell`	`^[0-9]{7}$`
`18:37.35`	`Qwell`	`maybe`
`18:37.54`	`Qwell`	`^[2-9][0-9]{6}$ realistically`
`18:38.08`	`Qwell`	`I suck at regex`
`18:48.29`	`[hC]`	`Man.. I wish i knew exactly what the culprit was .. I presume its NAT timeouts, but.. I have messages all day, about phones registering, unregistering, registering, unregistering`
`18:48.33`	`[hC]`	`or becoming unreachable`
`18:48.42`	`[hC]`	`I have expiry set to 45!`
`18:52.03`	`jontow`	`hmm.. anyone used the Varion V400P?`
`18:52.30`	`*** join/#asterisk ManxPower (n=eric@slip-12-64-90-191.mis.prserv.net)`
`18:53.42`	`*** join/#asterisk Veto_laptop (i=mdkuser@cpe-66-69-38-192.satx.res.rr.com)`
`18:57.00`	`*** join/#asterisk Howitzer (n=aa@217.136.147.180)`
`18:58.39`	`twisted`	`bwahahahahahaha`
`18:58.40`	`twisted`	`http://www.shoplaser.com/index.html`
`18:58.47`	`twisted`	`what will they think of next?`
`18:58.56`	`*** part/#asterisk quasi2k (n=Marcus@dsl-217-17-22-122.teliko.net)`
`19:00.31`	`*** join/#asterisk brookshire (n=matt@esbrooks3.traveller.com)`
`19:02.12`	`*** join/#asterisk MnxPower (n=eric@slip-12-65-168-175.mis.prserv.net)`
`19:02.28`	`MnxPower`	`64 bytes from 209.16.72.158: icmp_seq=437 ttl=49 time=6315 ms`
`19:03.53`	`Qwell`	`MnxPower: very nice`
`19:07.15`	`*** join/#asterisk ret28 (i=rt@82-71-120-246.dsl.in-addr.zen.co.uk)`
`19:07.49`	`ret28`	`Evening`
`19:08.35`	`ret28`	`"Oct 9 20:03:52 DEBUG[31712]: Sending dtmf: 50 (2), at 82.71.120.242" from the logs`
`19:08.56`	`ret28`	`(was attempting to hit '2' in the voicemail system)`
`19:09.33`	`twisted`	`DEBUG is not a complaint`
`19:09.58`	`*** join/#asterisk IPmonger (n=ipmonger@pcp0010577106pcs.coatsv01.pa.comcast.net)`
`19:10.00`	`ret28`	`Well, the voicemail app doesn't recognise it :/`
`19:10.12`	`ret28`	`Another client manages to use voicemail just fine though (same user)`
`19:10.31`	`ret28`	`"Oct 9 20:01:46 DEBUG[31712]: Detected DTMF '1'" <-- success`
`19:12.41`	`ret28`	`Oh, now that's odd ... just forced the client to send it inband instead of rfc.... and it works`
`19:12.53`	`ret28`	`Thought the dtmf method was autonegotiated though`
`19:12.58`	`Qwell`	`no`
`19:13.02`	`Qwell`	`they need to be the same`
`19:13.15`	`ret28`	`Hmm`
`19:13.16`	`Qwell`	`inband only works on ulaw/alaw`
`19:13.34`	`twisted`	`inband only works effectively on those codecs`
`19:13.48`	`twisted`	`i have seen strange shit where it works partially on codecs as compressed as g729 :P`
`19:13.52`	`Qwell`	`heh`
`19:14.01`	`ret28`	`OK, what's the most liberal dtmf method?`
`19:14.14`	`ret28`	`(I was forcing inband because of kphone being inadequate)`
`19:15.40`	`ret28`	`twisted: Heh. It screamed at me when I tried forcing inband on gsm :)`
`19:15.45`	`ret28`	`(well, where scream == massive log spam)`
`19:15.58`	`file`	`inband on compressed codecs is bad, mmmk?`
`19:17.05`	`ret28`	`What should I be setting it to by default, the rfc or info ?`
`19:17.27`	`file`	`rfc2833 is good`
`19:17.34`	`ret28`	`'k`
`19:17.57`	`ret28`	`I'll do that for default, and coerce the kphone user with dtmfmode=inband and disallow=gsm`
`19:26.29`	`drumkilla`	`file: poke`
`19:26.33`	`*** join/#asterisk brc_ (n=Brian@pdpc/supporter/basic/brc)`
`19:26.35`	`file`	`drumkilla: prod`
`19:26.39`	`brc_`	`ZAP!`
`19:26.43`	`*** join/#asterisk toddf (n=toddf@ns0.fries.net)`
`19:26.44`	`brookshire`	`drumkilla: <3`
`19:26.45`	`brookshire`	`:D`
`19:26.48`	`drumkilla`	`w00t`
`19:27.16`	`drumkilla`	`how are you kids today`
`19:27.28`	`Juggie`	`got astricon setup yet? :P`
`19:27.30`	`*** join/#asterisk ManxPower (n=eric@adsl-70-247-221-174.dsl.lgvwtx.swbell.net)`
`19:27.34`	`file`	`drumkilla: oh, it's a fun day`
`19:27.36`	`brookshire`	`doing gooood :)`
`19:27.51`	`drumkilla`	`i still have to do laundry before I can pack :)`
`19:28.04`	`twisted`	`me too`
`19:28.10`	`twisted`	`yesterday was clean the apartment day`
`19:28.11`	`drumkilla`	`oh, and finish 2 different programming assignments for school`
`19:28.14`	`drumkilla`	`in 2 different languages`
`19:28.17`	`twisted`	`which i have done, and now i have like 3 piles of clothing`
`19:28.20`	`drumkilla`	`prolog and verilog! yay`
`19:28.31`	`Qwell`	`meh`
`19:28.34`	`Juggie`	`i guess i need all shorts heh`
`19:28.40`	`Qwell`	`at least you guys don't have to move a whole apartment before you can go :p`
`19:28.42`	`Juggie`	`qwell, its gonna be hot isnt it`
`19:28.43`	`drumkilla`	`someone check the weather`
`19:28.48`	`Qwell`	`Juggie: high 80s`
`19:28.49`	`twisted`	`drumkilla, already have`
`19:28.56`	`drumkilla`	`Qwell: I move a whole apartment a few times a year`
`19:28.59`	`twisted`	`low-mid 80s, with the low in the lower 50's`
`19:29.02`	`Qwell`	`drumkilla: yeah...`
`19:29.03`	`twisted`	`almost all week`
`19:29.07`	`drumkilla`	`nice`
`19:29.09`	`Juggie`	`will tere be hot girls :P`
`19:29.14`	`Juggie`	`*there`
`19:29.17`	`drumkilla`	`we need to have a beach party`
`19:29.18`	`ret28`	`BTW, cheers for the help guys, and nn`
`19:29.20`	`drumkilla`	`twisted: you with me?`
`19:29.22`	`twisted`	`drumkilla, hell yea`
`19:29.25`	`drumkilla`	`awesome!!!`
`19:29.31`	`twisted`	`"pasty white boys visit the beach"`
`19:29.37`	`drumkilla`	`at night`
`19:29.39`	`*** part/#asterisk ret28 (i=rt@82-71-120-246.dsl.in-addr.zen.co.uk)`
`19:29.40`	`Juggie`	`drum, you going to go to the ducks game?`
`19:29.40`	`drumkilla`	`... and drink`
`19:29.40`	`twisted`	`ah yes. ok`
`19:29.44`	`twisted`	`sounds good :)`
`19:29.47`	`*** join/#asterisk _Thor (i=Christia@user-vc8fl7l.biz.mindspring.com)`
`19:29.48`	`drumkilla`	`i have no clue what I am doing`
`19:29.52`	`Qwell`	`make sure you find a beach where drinking is allowed`
`19:29.52`	`drumkilla`	`i am showing up`
`19:29.58`	`Qwell`	`there are a few where it isn't`
`19:30.08`	`drumkilla`	`yeah, most probably don't allow it ...`
`19:30.11`	`twisted`	`we could go to laguna beach :P`
`19:30.15`	`drumkilla`	`where i'm from it's not allowed`
`19:30.19`	`_Thor`	`Hi everyone`
`19:30.30`	`Juggie`	`whats not allowed?`
`19:30.34`	`Juggie`	`oh drinking`
`19:30.39`	`_Thor`	`Has anybody worked with PrepaidCall?`
`19:30.45`	`Qwell`	`even smoking isn't allowed at some beaches`
`19:31.43`	`file`	`ugh I'm tired`
`19:31.49`	`ManxPower`	`It's Calif. Smoking is punishable by death.`
`19:31.50`	`drumkilla`	`file: red bull`
`19:32.01`	`file`	`drumkilla: nooooooooooo`
`19:32.23`	`drumkilla`	`twisted: #astricon`
`19:33.44`	`_Thor`	`I really thought that PrepaidCall was a very well supported add-on when I chose it`
`19:34.26`	`drumkilla`	`i think most people use ASTCC`
`19:34.33`	`ManxPower`	`I liked Madrid. You could smoke in the hotel.`
`19:34.42`	`Qwell`	`ManxPower: Vegas`
`19:34.59`	`ManxPower`	`Qwell, I've not been to Vegas in like 10 years`
`19:35.32`	`_Thor`	`Anybody here has used ASTCC?`
`19:36.05`	`ManxPower`	`_Thor, Sorry, I don't bill for calls.`
`19:36.56`	`_Thor`	`Anybody here bills for calls :)?`
`19:36.56`	`drumkilla`	`ManxPower: I went there for my 21st birthday this summer :D`
`19:36.56`	`ManxPower`	`drumkilla, vegas?`
`19:36.57`	`drumkilla`	`ManxPower: indeed`
`19:37.11`	`ManxPower`	`drumkilla, gamble, get drunk, get laid?`
`19:37.11`	`Qwell`	`Astricon vegas, 2006?`
`19:37.18`	`drumkilla`	`the first 2, at least`
`19:37.22`	`Qwell`	`ManxPower: the latter is no longer legal in that county`
`19:37.34`	`_Thor`	`drumkilla: did you get lucky?`
`19:37.39`	`ManxPower`	`Qwell, I know, but shuttle service is provided to places where is IS legal.`
`19:37.44`	`drumkilla`	`_Thor: overall, no :)`
`19:37.44`	`*** join/#asterisk RoyK (n=roy@host-81-191-147-248.bluecom.no)`
`19:37.47`	`Qwell`	`shuttle service? wow`
`19:37.47`	`drumkilla`	`but had a great time ...`
`19:38.35`	`ManxPower`	`I got married in Vegas.`
`19:38.45`	`drumkilla`	`awesome`
`19:38.48`	`Qwell`	`I did too`
`19:39.20`	`_Thor`	`drumkilla: In Vegas, all you got to do is ask`
`19:39.41`	`Qwell`	`or get really drunk...`
`19:39.54`	`_Thor`	`Get drunk, and then ask anybody`
`19:40.44`	`blitzrage`	`heheh`
`19:41.03`	`_Thor`	`Just don´t pay more that 100 bucks :)`
`19:41.08`	`Qwell`	`nah`
`19:41.12`	`Qwell`	`don't pay LESS than 100 bucks`
`19:41.36`	`file`	`eep blitzrage`
`19:44.00`	`ManxPower`	`For something like that, I don't think going discount is a good value.`
`19:44.56`	`_Thor`	`no way in the world I would ever pay anybody $1000 for that`
`19:44.56`	`MrMAGO`	`^\d\d\d\d\d\d\d$ =)`
`19:47.43`	`*** join/#asterisk MikeJ[Laptop] (n=ircatjer@d14-69-8-30.try.wideopenwest.com)`
`19:49.20`	`ManxPower`	`Sex, like water and air, shoud be free.`
`19:49.27`	`tzanger`	`no`
`19:49.36`	`tzanger`	`sex is like programming. one mistake and you support it for life.`
`19:50.21`	`Qwell`	`sex is like an unmanaged switch. it doesn't matter which por..nevermind`
`19:50.26`	`tzanger`	`hahaha`
`19:50.32`	`_Thor`	`As a matter of fact, a girlfriend is much more expensive than a one time Vegas shot`
`19:50.53`	`Qwell`	`_Thor: girlfriends can be inexpensive. wives on the other hand...`
`19:50.55`	`tzanger`	`_Thor: don't I know it`
`19:50.59`	`MikeJ[Laptop]`	`heh`
`19:51.01`	`tzanger`	`Qwell: I know that too`
`19:52.29`	`Qwell`	`MrMAGO: Thats no good.`
`19:52.50`	`*** join/#asterisk stkn_ (i=nobody@gentoo/developer/pdpc.active.stkn)`
`19:52.51`	`Qwell`	`MrMAGO: If a country has a very small amount of digits, one could dial international with that`
`19:53.10`	`Qwell`	`first one should probably be [2-9]`
`19:55.29`	`*** join/#asterisk clive- (n=pirch@ndn-165-140-03.telkomadsl.co.za)`
`19:56.14`	`*** join/#asterisk cyun (n=martin@tor/session/x-d0ce532d0b8aa91f)`
`19:56.30`	`cyun`	`Hello, anyone good with asterisk that can help me set something up? I just want to create a simple setup where I can put up a phone and dial "000" to route me to line 1 and "001" to route me to line 2. Can anyone recommend where I should start or point me in a good direction? thanks.`
`19:57.02`	`jake1`	`wow i got asterisk installed 2 days ago and i have NO CLUE how to use it`
`19:57.13`	`Qwell`	`~docs`
`19:57.16`	`jbot`	`[docs] Documentation can be found at http://www.digium.com/index.php?menu=documentation or http://www.digium.com/handbook-draft.pdf or http://www.voip-info.org/wiki-Asterisk or http://www.asteriskdocs.org or http://www.oreilly.com/catalog/asterisk`
`19:57.17`	`Qwell`	`jake1: start there`
`19:57.43`	`clive-`	`cyun thats a very basic question, check the docs, you should find your answer easily`
`19:57.56`	`*** join/#asterisk oej (n=Olle@dsl001-136-130.lax1.dsl.speakeasy.net)`
`19:58.03`	`Qwell`	`oej: afternoon`
`19:58.09`	`*** join/#asterisk nnnnnn (n=killfill@pc-200-74-17-222.nunoa2.pc.metropolis-inter.com)`
`19:58.41`	`cyun`	`clive-, ya i realize it must be, but I'm not familiar with pbx terms and lingo... can you give me a keyword to search the docs for?`
`19:59.31`	`*** join/#asterisk n4y (n=tmalkut@fw.orasoft.net.pl)`
`19:59.41`	`clive-`	`cyun extensions.conf`
`20:00.48`	`SplasPood`	`Is there any way to make Dial() continue on in the exten if the CALLING party hangs up, not just the called party?`
`20:02.15`	`*** join/#asterisk kiwnix (n=egarcia@82.158.159.104)`
`20:05.58`	`ManxPower`	`SplasPood, see exten => h,1,Blah as well as "g" option to "show application dial"`
`20:07.44`	`_Thor`	`I have a dumb question... I have compiled file app_prepaid_call.c, and it all creates well corresponding .so files....now, how in the world asterisk correlates function PrepaidCall() to that module, since they don´t spell the same??`
`20:07.50`	`SplasPood`	`Manx: yea, but g only works for when the called party hangs up, not the calling party`
`20:10.36`	`_Thor`	`Qwell`
`20:10.46`	`Qwell`	`?`
`20:11.03`	`SplasPood`	`Manx: any other thoughts?`
`20:11.34`	`_Thor`	`what correlation is between a module app_dial.so an command Dial() ?`
`20:12.04`	`SplasPood`	`direct?`
`20:12.45`	`*** join/#asterisk Craziman2 (n=Craziman@63.108.128.250)`
`20:12.51`	`_Thor`	`is it that Asterisk looks for its commands in folder modules and assumes anything apps-*.so is a command?`
`20:13.21`	`SplasPood`	`I'm not positive, but I believe the module registers itself as an application`
`20:13.30`	`SplasPood`	`I don't think it has anything to do with the filename, per say`
`20:13.41`	`_Thor`	`but how does it knows?`
`20:13.44`	`SplasPood`	`One of the devs would be able to give a better answer`
`20:13.48`	`brookshire`	`are you running cvs?`
`20:13.51`	`blitzrage`	`ManxPower: any suggestions for traffic shaping based on interfaces / networks ?`
`20:13.55`	`drumkilla`	`it has nothing to do with the name`
`20:13.58`	`SplasPood`	`I'd guess something like register_me_as_an_app()`
`20:14.07`	`ManxPower`	`blitzrage, what hardware?`
`20:14.14`	`drumkilla`	`every module has a function called load_module() that gets called when it gets loaded`
`20:14.15`	`SplasPood`	`brook: me?`
`20:14.19`	`_Thor`	`meaning, if file is named app_dial.so, who come it correlates it to Dial()`
`20:14.22`	`drumkilla`	`and inside that function, it registers itself as whatever it is`
`20:14.23`	`brookshire`	`spals: yeah`
`20:14.31`	`blitzrage`	`ManxPower: computer running Linux / or whatever`
`20:14.34`	`blitzrage`	`ManxPower: with 2 interfaces`
`20:14.45`	`SplasPood`	`brook: 1.2beta1 I'm pretty sure, since it shows.. no version on show version`
`20:14.52`	`blitzrage`	`ManxPower: Sempron 2200+ with 512+ of RAM`
`20:14.56`	`drumkilla`	`_Thor: inside app_dial.so's load_module function, it registers Dial(), the dialplan application`
`20:15.06`	`blitzrage`	`ManxPower: so I can run anything that a computer can run...`
`20:15.09`	`ManxPower`	`blitzrage, not really.`
`20:15.14`	`drumkilla`	`a loadable module can have multiple dialplan applications in it, or other stuff, too`
`20:15.15`	`blitzrage`	`damn...`
`20:15.30`	`drumkilla`	`and the name does not force anything`
`20:15.35`	`ManxPower`	`blitzrage, Want to know how I do it?`
`20:15.36`	`drumkilla`	`that's just for convenience`
`20:15.53`	`blitzrage`	`ManxPower: please`
`20:16.11`	`blitzrage`	`ManxPower: just want to make sure we have a good network here for Astricon... but I'm not a big network admin guy really :)`
`20:16.27`	`_Thor`	`guys, I am frantically reviewing the code as we speak :)`
`20:16.31`	`ManxPower`	`blitzrage, I set all my voip devices to use tos=0xb8 (DSCP Express Forwarding), then traffic shape based on the TOS. This assumes you trust all your network devices.`
`20:16.48`	`SplasPood`	`brookshire: any thoughts?`
`20:16.49`	`ManxPower`	`blitzrage, too bad I could not attend`
`20:16.50`	`blitzrage`	`ManxPower: yah... I won't :)`
`20:16.55`	`blitzrage`	`ManxPower: yah... very much too bad`
`20:17.06`	`blitzrage`	`ManxPower: can't trust people coming to this thing :)`
`20:17.14`	`drumkilla`	`_Thor: join #asterisk-dev if you have more questions`
`20:17.24`	`ManxPower`	`blitzrage, you can trust them to overwhelm the network and crash the hotel's router.`
`20:17.28`	`ManxPower`	`That much you can count on.`
`20:17.33`	`blitzrage`	`ManxPower: I want to shape based on interface/network really -- so I can set a lower priority for wireless than over the wired connections (which I'll be able to control)`
`20:17.46`	`blitzrage`	`ManxPower: we have our own router with T1s attached to it`
`20:17.55`	`blitzrage`	`ManxPower: I have total control of the Internet access`
`20:18.03`	`blitzrage`	`ManxPower: hotel has no control of it`
`20:18.08`	`ManxPower`	`blitzrage, what router?`
`20:18.10`	`blitzrage`	`luckily enough :)`
`20:18.24`	`blitzrage`	`ManxPower: Cisco 18xx (can't rmeember the xx part)`
`20:18.35`	`blitzrage`	`ManxPower: has 2 T1 interfaces and 2 eth interfaces`
`20:18.36`	`*** join/#asterisk pooh_ (n=hfwang@cust.15.241.adsl.cistron.nl)`
`20:18.37`	`ManxPower`	`blitzrage, nifty. Want a copy of my 1750 configs?`
`20:18.48`	`blitzrage`	`ManxPower: hrmm... don't really want to change anything on there :)`
`20:18.53`	`blitzrage`	`ManxPower: Speakeasy set it up for us`
`20:18.53`	`ManxPower`	`blitzrage, wuss`
`20:18.56`	`blitzrage`	`ManxPower: lol`
`20:18.57`	`_Thor`	`terrific help.... thank you guys`
`20:19.08`	`ManxPower`	`blitzrage, I don't use PCs for routers`
`20:19.10`	`blitzrage`	`ManxPower: ok... we're going for lunch now -- gotta go :)`
`20:19.15`	`blitzrage`	`peas!`
`20:19.16`	`pooh_`	`anybody familiar with qozap quadbri?`
`20:19.47`	`cyun`	`can someone help me in setting up a simple routing setup?`
`20:20.13`	`pooh_`	`shoot`
`20:20.42`	`cyun`	`I just want to create a simple setup where I can put up a phone and dial "000" to route me to line 1 and "001" to route me to line 2.`
`20:21.13`	`cyun`	`I realize its a simple question, but I have no experience with pbx's and only need to do that one thing...`
`20:21.20`	`Qwell`	`zap?`
`20:21.22`	`pooh_`	`take a look at the sample config files`
`20:21.33`	`clive-`	`cyun stop asking the same questions over and over`
`20:21.34`	`cyun`	`however I'm really not wanting to go through tons of docs`
`20:21.47`	`pooh_`	`ot look at www.voip-info.org sip.conf iax.conf`
`20:22.03`	`cyun`	`clive-, i really didnt get any answer the first time`
`20:22.12`	`SplasPood`	`cyun: you could hire a consultant`
`20:22.14`	`cyun`	`this is a support chan right?`
`20:22.17`	`Qwell`	`<clive-> cyun thats a very basic question, check the docs, you should find your answer easily`
`20:22.30`	`cyun`	`yep`
`20:22.34`	`cyun`	`i did check the docs`
`20:22.38`	`Qwell`	`cyun: support, yes. not "do everything for you for free"`
`20:22.43`	`cyun`	`been checking them for a while`
`20:23.11`	`SplasPood`	`there are a ton of examples on www.voip-info.org and within the example configs..`
`20:23.32`	`cyun`	`yep`
`20:23.37`	`cyun`	`ill look into it`
`20:23.51`	`*** join/#asterisk Assid (n=assid@203.115.64.57)`
`20:23.57`	`cyun`	`but voip is not what i'm wanting to do.. maybe it'll apply somehow to what im doing`
`20:24.07`	`cio`	`On a related subject, is there a way to change the default text when there is no caller id to something besides "asterisk"?`
`20:24.13`	`Qwell`	`cyun: If you ask a real question...you might get a real answer.`
`20:24.27`	`Qwell`	`What is line 1? Why do you need to dial a specific prefix to hit that line?`
`20:24.51`	`cyun`	`cause the phone will have one line connecting to it`
`20:25.01`	`Qwell`	`define line`
`20:25.04`	`cyun`	`and it needs to be able to access both lines`
`20:25.08`	`cyun`	`telephone line`
`20:25.22`	`cyun`	`normal walljack`
`20:25.30`	`Qwell`	`one phone, two lines? Why not just setup a group so it doesn't matter if one is free or not?`
`20:26.04`	`cyun`	`whats a group?`
`20:26.11`	`Qwell`	`~docs`
`20:26.14`	`jbot`	`rumour has it, docs is Documentation can be found at http://www.digium.com/index.php?menu=documentation or http://www.digium.com/handbook-draft.pdf or http://www.voip-info.org/wiki-Asterisk or http://www.asteriskdocs.org or http://www.oreilly.com/catalog/asterisk`
`20:26.34`	`cyun`	`right`
`20:29.54`	`*** join/#asterisk Veto_laptop (i=mdkuser@cpe-66-69-38-192.satx.res.rr.com)`
`20:30.00`	`killfill`	`hey, how do i see ive my zaptel x100p clone card can make calls?, where do i test this?.. im new to asterisk... :-p`
`20:36.19`	`SplasPood`	`So can someone explain why the 'g' option to Dial() only works if the target of the Dial() hangs up and not either party?`
`20:36.26`	`cio`	`On a related subject, is there a way to change the default text when there is no caller id to something besides "asterisk"?`
`20:39.06`	`Qwell`	`SplasPood: because the person who added that option intended it to be that way`
`20:39.26`	`Qwell`	`SplasPood: as was said earlier, look at extension 'h'`
`20:39.51`	`SplasPood`	`Qwell: I've looked at it, and already have it in use.. It doesn't get called either.. I'm more than happy to listen to suggestions..`
`20:40.13`	`*** part/#asterisk eGnarF (i=mrbk@eris.hb.lu.se)`
`20:41.55`	`SplasPood`	`Dial() simply exits -1 and thats where it stops..`
`20:42.24`	`*** join/#asterisk ManxPower (n=eric@adsl-70-247-221-174.dsl.lgvwtx.swbell.net)`
`20:42.35`	`SplasPood`	`<PROTECTED>`
`20:43.16`	`ManxPower`	`SplasPood, you need a NoOp(DIALSTATUS=${DIALSTATUS}) after the dial`
`20:43.34`	`*** part/#asterisk opus__ (n=opus@dahphish.org)`
`20:44.32`	`SplasPood`	`Manx: It never gets called if the calling party hangs up, hence the problem.. However, i've just discovered that exten => h does get called, just in the calling context, not within the macro.. So I suppose that'd be my mistake when it came to that suggestion`
`20:44.40`	`SplasPood`	`I still don't understand why 'g' just doesn't work both ways`
`20:45.06`	`Qwell`	`wasn't intended to work both ways`
`20:45.17`	`ManxPower`	`SplasPood, doing posthangup processing sucks`
`20:45.22`	`SplasPood`	`yes, but is there a technical reason, or just for fun?`
`20:45.51`	`SplasPood`	`Manx: I'm seeing this...`
`20:46.20`	`SplasPood`	`Well anyway, a exten => h, in the calling context does what I need in that regard`
`20:46.30`	`SplasPood`	`I had it within the macro, and that wasn't working`
`20:46.51`	`SplasPood`	`Next question would be how I could determine which of SIP/7001&SIP/7002&SIP/7003 answered the call`
`20:59.55`	`cio`	`On a related subject, is there a way to change the default text when there is no caller id to something besides "asterisk"?`
`21:01.15`	`drumkilla`	`it's hard coded in chan_sip right now, but that has been under discussion lately`
`21:02.02`	`drumkilla`	`in cvs head, you can change like 328, which is "#define DEFAULT_CALLERID "asterisk" "`
`21:02.49`	`mog_home`	`DRUMKILLA you out at *con yet`
`21:03.03`	`drumkilla`	`nope`
`21:03.06`	`*** part/#asterisk cyun (n=martin@tor/session/x-d0ce532d0b8aa91f)`
`21:03.10`	`drumkilla`	`i fly in with you guys tomorrow`
`21:04.47`	`cio`	`Cool. Thanks.`
`21:04.50`	`mog_home`	`oh really`
`21:04.55`	`mog_home`	`you gonna hit huntsville`
`21:05.05`	`pooh_`	`Ok guys, really need some help here with quadbri and qozap module`
`21:05.10`	`*** part/#asterisk IPFOX^^ (n=barny@cpc2-char1-5-0-cust96.sot3.cable.ntl.com)`
`21:05.11`	`pooh_`	`getting desperate`
`21:05.56`	`drumkilla`	`mog_home: nope, i'm just on the same flight from TX to CA`
`21:06.03`	`mog_home`	`ahh`
`21:06.05`	`mog_home`	`nice`
`21:06.11`	`drumkilla`	`yah`
`21:06.11`	`drumkilla`	`:)`
`21:06.12`	`ManxPower`	`pooh_, I vaguely recall some bug where all audio stops working if you have a Zap driver loaded, but no line connected into it.`
`21:07.03`	`ManxPower`	`pooh_, might be ISDN specific`
`21:10.57`	`pooh_`	`ManxPower: so if no lines connected quadbri does not work?`
`21:12.43`	`ManxPower`	`pooh_, As I said, I don't remember.`
`21:12.51`	`ManxPower`	`Try a mailing list search.`
`21:13.13`	`pooh_`	`ok`
`21:13.59`	`pooh_`	`ewww, how can I search the archives pls?`
`21:14.57`	`ManxPower`	`~mailinglist`
`21:14.58`	`jbot`	`from memory, mailinglist is Search Asterisk mailing lists by prepending site:lists.digium.com to your Google search. Browse the mailing list archive at http://lists.digium.com/`
`21:15.23`	`*** join/#asterisk tzafrir_laptop (n=tzafrir@bzq-179-75-202.cust.bezeqint.net)`
`21:15.37`	`pooh_`	`got it thx`
`21:16.33`	`cio`	`Anyone here have a number I can call and maybe you can tell me what caller-id info you get? I'm trying to figure something out.. I think I have a problem with my telco..`
`21:16.45`	`cio`	`Can't call them of course, it's Sunday ..`
`21:17.15`	`mmlj4`	`hey ManxPower`
`21:21.05`	`pooh_`	`MaxPower: care to do a search for me, can not find anything :-(`
`21:22.07`	`*** join/#asterisk SwK (i=ijgtfn@12-219-144-126.client.mchsi.com)`
`21:25.39`	`pooh_`	`ManxPower: care to do a search for me, can not find anything :-( (typo)`
`21:26.13`	`pooh_`	`I read something about module-init-tools.... anyway related ?`
`21:27.43`	`Qwell`	`pooh_: module-init-tools is needed to run a 2.6 kernel, instead of module-utils, or whatever`
`21:29.21`	`pooh_`	`ok, using 2.4 here. Thx`
`21:30.36`	`*** join/#asterisk mhnoyes (n=mhnoyes@user-38lc15t.dialup.mindspring.com)`
`21:30.53`	`*** join/#asterisk DaPrivateer (i=Privatee@CRIMSON.OFF-HOURS.COM)`
`21:39.02`	`*** join/#asterisk vvo (n=michal@bxj30.neoplus.adsl.tpnet.pl)`
`21:41.24`	`*** join/#asterisk tainted_ (n=identd@adsl-71-129-47-53.dsl.irvnca.pacbell.net)`
`21:41.51`	`*** join/#asterisk darby_t (n=tom@dno226.neoplus.adsl.tpnet.pl)`
`21:43.15`	`vvo`	`o, ktos z Polski (;`
`21:45.43`	`pooh_`	`no polski ;-)`
`21:45.46`	`pooh_`	`njet ;-)`
`21:55.04`	`pooh_`	`Dearly beloved, we are gather here today to say goodby to a ' good' friend......`
`21:56.10`	`tamp4x`	`kurwa`
`21:56.11`	`pooh_`	`anybody have some last words for thispiece of junk ?`
`22:00.55`	`InfraRed`	`freaks`
`22:01.36`	`pooh_`	`sttt. we are morning`
`22:10.27`	`*** join/#asterisk jdiskywlkr (n=kvirc@ip68-0-90-1.tu.ok.cox.net)`
`22:10.52`	`*** join/#asterisk mithro (n=tim@p548E84D5.dip0.t-ipconnect.de)`
`22:14.40`	`*** join/#asterisk ManxPower (n=eric@adsl-70-247-221-174.dsl.lgvwtx.swbell.net)`
`22:14.45`	`ManxPower`	`100 packets transmitted, 85 received, +1 duplicates, 15% packet loss, time 99836ms`
`22:14.52`	`ManxPower`	`Apparently Texas qualifies as a 3rd world country`
`22:16.43`	`pauldy`	`uhm ?`
`22:19.13`	`pauldy`	`one shot one kill`
`22:25.18`	`*** join/#asterisk RoyK (n=roy@55.80-202-161.nextgentel.com)`
`22:25.42`	`*** join/#asterisk nvz (n=nvz@c-24-3-200-17.hsd1.pa.comcast.net)`
`22:25.52`	`*** join/#asterisk harryvv (n=none@S010600a0c93f6f7e.vs.shawcable.net)`
`22:26.17`	`nvz`	`oh wow lots of people here :)`
`22:26.21`	`harryvv`	`good web site to shop for wholsale rates?`
`22:27.13`	`*** join/#asterisk alexhopper (n=a27386@CPE000103d29ae2-CM001225dfdfe0.cpe.net.cable.rogers.com)`
`22:27.46`	`InfraRed`	`harryvv: www.voip-info.org`
`22:27.52`	`InfraRed`	`:p under wholesaaale providers`
`22:28.01`	`nvz`	`hmm I just remembered there is an asterisk-doc package available.`
`22:28.12`	`InfraRed`	`you want someone close to you, someone on the other side of the world who's cheap is no good IMHO`
`22:28.34`	`harryvv`	`yes, trying to beat telus rates for some people.`
`22:28.47`	`nvz`	`no wonder there wasnt any good docs on how to use this thing. I didn't have them installed`
`22:28.49`	`harryvv`	`from canada to india`
`22:31.19`	`InfraRed`	`send an email to asterisk-biz list`
`22:31.25`	`InfraRed`	`loads of people will reply i bet`
`22:33.20`	`harryvv`	`yes`
`22:33.37`	`*** join/#asterisk syle2 (n=blag@unaffiliated/syle)`
`22:33.51`	`*** join/#asterisk nnnnnn (n=killfill@pc-200-74-17-222.nunoa2.pc.metropolis-inter.com)`
`22:38.48`	`nvz`	`All I am interested in right now is using my PC for a caller-ID unit, and maybe later down the road for a call-filter, speaker-phone..etc this software seems really confusing and the documentation keeps talking about Voip that doesnt seem related to what I want to do. maybe i should be using something simpler like mgetty?`
`22:40.16`	`dudes`	`Actually asterisk is well documented, and it's not all that complicated. Most things related to SIP/IAX can be reversed in a similiar fashion as using zap`
`22:41.13`	`nvz`	`I am reading the documentation now, it might as well be written in hieroglyphs for all the sense its making to me right now. I dont know all these fancy TLAs and telephony terms`
`22:41.42`	`dudes`	`you need to install it and play with it`
`22:41.45`	`nvz`	`I havent crossed a single document yet that seems to explain the simple nature of what I want to do`
`22:41.57`	`nvz`	`I have it installed, and I havent the slightest clue what to play with`
`22:42.44`	`dudes`	`you start in /etc/asterisk`
`22:42.55`	`nvz`	`its installed and running right now for whatever its worth. its just a daemon that runs in the background and it has over a dozen config files. I have no idea what that does for me`
`22:43.05`	`dudes`	`configure your zap/sip/iax phones and then edit extensions.conf to do what you want it to do`
`22:43.26`	`dudes`	`that's why you read the docs on extensions.conf and such`
`22:43.28`	`InfraRed`	`dudes: asterisk documentation is out of date with every release/subrelease`
`22:43.34`	`nvz`	`see, thats what I am talking about I dont know wtf a ZAP, SIP, or IAX is`
`22:43.52`	`InfraRed`	`nvz: learn quickly`
`22:44.01`	`InfraRed`	`nvz: asterisk is telecom, not IT`
`22:44.29`	`InfraRed`	`nvz: voip-info.org has all the stuff you need to learn, or most ofn it at least`
`22:45.10`	`*** join/#asterisk gambolputty (n=gambolpu@72.240.241.108)`
`22:45.16`	`InfraRed`	`just because you come from IT background don't expect asterisk to be walk in the park`
`22:46.12`	`harryvv`	`yes`
`22:46.15`	`nvz`	`I am confused. all I keep reading is using undefined terminology and TLA's to descripe this "PBX" and "Voip" stuff and I have no idea what any of that is or what it has to do with a window poping up to tell me who's calling. :P`
`22:46.25`	`harryvv`	`seems some administrators have a tough time understanding asterisk.`
`22:46.46`	`sivana`	`JerJer: you around?`
`22:48.26`	`nvz`	`I am not trying to create some business telephony system here. I just want to know who is calling my single home line.`
`22:48.37`	`dwmw2_gone`	`nvz: then you probably don't need Asterisk`
`22:48.40`	`nvz`	`I am beginning to think this software is far too complex for my needs`
`22:49.00`	`harryvv`	`who is like in CID?`
`22:49.00`	`InfraRed`	`probably is`
`22:49.07`	`dwmw2_gone`	`Asterisk is what you need to run a full private exchange, with real phone lines and/or Voice over IP.`
`22:49.07`	`InfraRed`	`it's a PBX`
`22:49.20`	`InfraRed`	`a complete switchboard`
`22:49.25`	`InfraRed`	`well, almost complete`
`22:49.26`	`InfraRed`	`:)`
`22:49.36`	`nvz`	`batteries not included? :P`
`22:49.40`	`*** join/#asterisk mithro (n=tim@p548E84D5.dip0.t-ipconnect.de)`
`22:49.41`	`harryvv`	`Thanks giving here in Canada`
`22:49.47`	`dwmw2_gone`	`If all you want is a window popping up showing the incoming caller-id when you receive a call, you probably want something a _lot_ simpler`
`22:50.11`	`InfraRed`	`YOU NEED MICROSOFT TELECOM 6000 XP`
`22:50.17`	`nvz`	`eww`
`22:50.22`	`harryvv`	`what is that?`
`22:50.25`	`InfraRed`	`all you need to do is to setup.exe`
`22:50.26`	`InfraRed`	`:)`
`22:50.42`	`InfraRed`	`harryvv: no idea, i just made it up`
`22:50.51`	`dudes`	`You can set CID in Asterisk if you have a PRI or a VOIP trunk that supports it`
`22:50.52`	`harryvv`	`i need to embed my firewall on a small form factor system`
`22:51.55`	`killfill`	`hey, i cannot make my asterisk work.. :-p im with asterisk@home, and my SIP phone (X-lite) shows "Login failed! contact the admin" whn i try to "login to a extension".`
`22:52.41`	`killfill`	`how do i see whats happening`
`22:52.42`	`nvz`	`I am not sure even if I studied my TLAs if it would be worth learning how this works or not. I may be interested in other things.. but the reason someone suggested this to me, was I want a caller id. so when I am down here on the PC I know if its worth stopping what I am doing to answer the phone`
`22:53.23`	`nvz`	`I am sure if I learned how this works I could probably build something to interact with my phone system from any PC in the house and do some interesting things`
`22:54.26`	`nvz`	`I should probably look into mgetty it says it can do the basic things I wanted.`
`22:54.45`	`*** join/#asterisk iCEBrkr (i=icebrkr@rrcs-24-129-130-158.se.biz.rr.com)`
`22:55.30`	`killfill`	`hey nvz, would you give me a hand?..`
`22:55.40`	`nvz`	`heh`
`22:55.45`	`nvz`	`you've got to be kidding`
`22:56.23`	`nvz`	`thats about the only hand I can give you`
`22:56.50`	`killfill`	`thanks..`
`22:57.28`	`nvz`	`I asked about using my PC for a caller ID and someone recommended me to this vastly complicated asterisk PBX software. I am clueless`
`22:58.12`	`nvz`	`I just read through /usr/share/doc/asterisk-doc/ and I wasnt able to grok any of it. because its not in english. its in engrish acronym`
`22:58.25`	`killfill`	`ah didnt understood what you typed before...`
`22:58.25`	`harryvv`	`nvz, yea dont use it`
`22:58.48`	`harryvv`	`nvz, why not just call your telephone carrier to turn on caller id?`
`22:59.23`	`killfill`	`damn.. im sure i messed something up yesterday night... i cannot even connect the x-lite client...`
`22:59.27`	`harryvv`	`nvz, asterisk is way to complex for the new person to understand.`
`22:59.49`	`nvz`	`harryvv: we have caller ID, and upstairs we got one of them talking caller-id phones. down here I got a three-headed monster (3 clustered pcs) I figured rather than going out any buying another caller id unit I could just put them to work as a caller-id`
`23:00.31`	`nvz`	`I don't spend money on technology unless it makes me money. and I quit doing IT long time ago. all this hardware I have is free.`
`23:00.50`	`nvz`	`I figured it was fully capable of serving my convenience`
`23:02.31`	`*** join/#asterisk r0d3nt (i=nobody@wsip-24-234-241-145.lv.lv.cox.net)`
`23:04.49`	`nvz`	`I will try hack something together. Its pretty obvious this is overkill. Ideally I only want the phone down here to ring if its someone worth talking to. I dont want to be working on the PC and have the phone ring only to discover its a creditor for someone who hasnt lived here in 40 years :P`
`23:09.04`	`killfill`	`the sip phone log shows me this`
`23:09.06`	`killfill`	`SIP/2.0 403 Forbidden`
`23:10.09`	`*** join/#asterisk oej (n=Olle@dsl001-136-130.lax1.dsl.speakeasy.net)`
`23:10.41`	`wunderkin`	`welcome to america!`
`23:15.18`	`*** join/#asterisk r0d3nt\|m (i=nobody@wsip-24-234-241-145.lv.lv.cox.net)`
`23:17.42`	`nvz`	`amerukia f*** yeah!`
`23:18.05`	`*** part/#asterisk nvz (n=nvz@c-24-3-200-17.hsd1.pa.comcast.net)`
`23:18.26`	`killfill`	`show agents Show status of agents`
`23:18.52`	`killfill`	`what an agent?..`
`23:18.52`	`killfill`	`a phone?`
`23:19.34`	`wunderkin`	`no, an agent is typically used in a queue`
`23:20.23`	`killfill`	`how do i show the eveiable extensions?.. im trying to login with the sip phone, but cannot..`
`23:20.40`	`blitzrage`	`oej: !!!`
`23:20.47`	`blitzrage`	`oej: ALARM!`
`23:23.01`	`kram`	`hi blitz`
`23:23.07`	`blitzrage`	`kram: hey oh!`
`23:23.15`	`blitzrage`	`kram: wuz up?`
`23:23.55`	`Qwell`	`kram: afternoon`
`23:25.20`	`blitzrage`	`ok... wireless network audit time!`
`23:25.34`	`*** join/#asterisk mithro (n=tim@p548E84D5.dip0.t-ipconnect.de)`
`23:26.03`	`killfill`	`hey guys.. want to give me a hand?..`
`23:26.13`	`killfill`	`this is the log of x-lite:`
`23:26.15`	`killfill`	`http://pastebin.com/388599`
`23:26.20`	`*** join/#asterisk mcquaid (i=mcquaid@toronto-hs-216-138-233-79.s-ip.magma.ca)`
`23:26.37`	`killfill`	`why do i get forbidden?..`
`23:26.52`	`mcquaid`	`hello, can asterisk operate behind a firewall, without mucking with the ports on the firewall itself?`
`23:27.13`	`mcquaid`	`I guess I'm wondering if asterisk can perform the same nat traversal magic that something like skype does`
`23:28.22`	`mcquaid`	`not sure if asterisk can be used in this case, but basically i signed up for vbuzzer.com and it works fine with their softphone`
`23:28.37`	`mcquaid`	`but all linux softphones i try fail to connect and i believe it's a nat issue`
`23:29.55`	`mcquaid`	`and i'm wondering if asterisk could help me get around this, but i don't have access to the firewall, so i wanted to know if asterisk could perform properly behind a firewall and perform this nat traversal for me and then i'd use a softphone to connect to the asterisk server`
`23:31.35`	`*** join/#asterisk techie (i=gus@70.86.133.66)`
`23:38.54`	`*** join/#asterisk AsteriskNoob (i=BoredBoz@207-114-232-10.gen.twtelecom.net)`
`23:39.01`	`AsteriskNoob`	`hey everyone!`
`23:40.18`	`AsteriskNoob`	`who here has played with the BETA?`
`23:44.45`	`twisted`	`nobody`
`23:44.48`	`twisted`	`betas are for wussies`
`23:44.52`	`twisted`	`we like pre-alpha here.`
`23:45.09`	`CoaxD`	`asterisk is always pre-alpha. :)`
`23:45.20`	`CoaxD`	`Generating DH parameters, 1024 bit long safe prime, generator 2`
`23:45.20`	`CoaxD`	`This is going to take a long time`
`23:45.32`	`CoaxD`	`gotta respect unix; at least it tells you the truth`
`23:46.10`	`mcquaid`	`can asterisk function behind firewall without having access to the firewall to open ports? the server does have nat running`
`23:46.23`	`CoaxD`	`(and on a Linksys WRT54G, it is really gonna take a long time.)`
`23:46.47`	`AsteriskNoob`	`lol@twisted`
`23:46.52`	`CoaxD`	`mcquaid: If you're using IAX2 as a communications protocol in its entirety, yes, long's the IAX2 port's open`
`23:47.22`	`AsteriskNoob`	`well I installed the 1.2 beta cause i was having issues with the 1.0.9 all of the sudden, I love the new features of 1.2 but they screwed up some PRI or SIP stuff... trying to trace it`
`23:47.22`	`CoaxD`	`mcquaid: Otherwise, youre pretty much screwed.`
`23:47.59`	`mcquaid`	`hmm, well i signed up for vbuzzer.com which is sip based, it's softphone works fine in windows, just trying to get any softphone client to work`
`23:48.32`	`mcquaid`	`i assume it's a firewall issue thats stopping me, so i guess their app is doing some nat traversal magic similar to skype. and I was hoping asterisk could do the same thing`
`23:48.53`	`mcquaid`	`since none of the other softphones in linux i've tried seem to do nat traversal`
`23:48.54`	`CoaxD`	`mcquaid: I dunno. i always have to putz with it to get it to work in that scenario`
`23:50.38`	`mcquaid`	`ok thx for your help`
`23:51.11`	`mcquaid`	`hmm, there must be some softphone that can get around this nat issue if asterisk isn't suitable for this`
`23:57.24`	`*** join/#asterisk chet-- (n=chet@cpe-065-190-056-004.triad.res.rr.com)`

Generated by irclog2html.pl by Jeff Waugh - find it at freshmeat.net! Modified by Tim Riker to work with blootbot logs, split per channel, etc.