| 00:00.47 | mjmtaiwan | any quick way to update to 1.2.4 if I installed without using cvs |
| 00:02.53 | mjmtaiwan | I tried #make upgrade #make clean; make install but ... no luck |
| 00:03.45 | thazza | mjmtaiwan: Did you just try #make clean, #make, #make install |
| 00:05.38 | Libila | for some reason I'm getting ZT_CHANCONFIG failed. I read multiple tutorials and I believe I have done it right, I just don't know why it's not working. I pasted all my configuration files and modules I have loaded at http://tinyurl.com/dy9hv could someone please take a look? |
| 00:05.47 | mjmtaiwan | well... I was in /usr/src/asterisk-1.2.1 and ran the #make upgrade #make clean; make install as I found after a google search but ... I think this is wrong. |
| 00:06.00 | mjmtaiwan | do I need to download the newest version first? |
| 00:06.30 | thazza | mjmtaiwan: Of course.. Remove the old src files and get new src. |
| 00:06.45 | mjmtaiwan | sorry... dumb question I guess. |
| 00:06.53 | mjmtaiwan | I have another... dumb question that is. |
| 00:08.35 | mjmtaiwan | I'm trying to get the incoming call to ring my cell and the sip phone on my desk at the same time. |
| 00:08.38 | mjmtaiwan | I'm using the following: |
| 00:08.52 | mjmtaiwan | exten => s,Dial(SIP/202&Zap/2/7039297626,60,otr) |
| 00:09.06 | mjmtaiwan | But ... it rings the sip phone once ... then only rings the cell. |
| 00:09.08 | justinu | everyone call mjm :) |
| 00:09.12 | *** join/#asterisk EriSan (n=erisan@81-174-35-6.f5.ngi.it) |
| 00:09.20 | mjmtaiwan | I'm ready!! |
| 00:09.27 | thazza | lol @ justinu |
| 00:09.50 | mjmtaiwan | (not the right number ;) |
| 00:10.43 | thazza | j/k |
| 00:11.20 | mjmtaiwan | I hope some of you are the digium guys I met in FLA last week. |
| 00:11.38 | justinu | nope |
| 00:11.39 | *** join/#asterisk Ariel_ (n=Ariel@dsl-20-177.cofs.net) |
| 00:12.16 | Ariel_ | hello folks |
| 00:12.19 | mjmtaiwan | Ah... perhaps he was in the other booth |
| 00:12.35 | hackeron | hmm, one of our lines went dead and everytime someone tries to make a call, asterisk just waits there even though there's no dialtone. I'm commented out the zap channel, but what can be done to avoid such a problem in the future? |
| 00:12.43 | justinu | what competition? |
| 00:12.55 | Qwell | justinu: the S word? |
| 00:12.58 | thazza | justinu: Me. |
| 00:13.33 | thazza | ~sword |
| 00:13.35 | jbot | from memory, sword is a maja playa |
| 00:13.52 | thazza | s-word ;-) |
| 00:14.11 | _Sam-- | if they can say digium why cant you say the s word? |
| 00:14.29 | justinu | ah, that word |
| 00:14.36 | justinu | well, i dig sangoma :P |
| 00:14.41 | _Sam-- | :) |
| 00:14.52 | chaos1 | hey, please advise. I want to setup a small asterisk test server.I don't have any specialized digium etc hardware |
| 00:15.13 | chaos1 | how do i go about trying different features of asterisk just starting of with a laptop,hub,few ethernet cables |
| 00:15.21 | chaos1 | is that enough? |
| 00:15.28 | justinu | sure |
| 00:15.31 | justinu | get a softphone client |
| 00:15.35 | mjmtaiwan | best quick way is with asterisk@home |
| 00:15.48 | chaos1 | justinu:gnuphone, would be fine.? |
| 00:15.50 | justinu | that's a good way to get your ass kicked here, mjmtaiwan |
| 00:15.59 | mjmtaiwan | just make sure you can wipe the drive with impunity |
| 00:16.02 | mjmtaiwan | oops. |
| 00:16.23 | chaos1 | mjmtaiwan:do u pronounce the j as y |
| 00:16.27 | Ariel_ | thazza, good to know is your T3/E3 card out yet? |
| 00:16.39 | Exstatica | haha i just caught a firmware upgrade syslog message from supura sp941 that is pretty funny |
| 00:16.49 | Exstatica | <134>** old magic: kOsMoS9 fIrMwArE, new magic: kOsMoS9 fIrMwArE |
| 00:16.56 | chaos1 | justinu:which client do u recommend |
| 00:16.56 | justinu | chaos1: i dunno about gnuphone, i used xlite for testing. |
| 00:17.07 | justinu | doesn't mean it's good tho |
| 00:17.30 | thazza | Ariel_: I was just kidding around, i don't work for the compition. |
| 00:17.31 | chaos1 | recommend any iax test client other than xlite |
| 00:17.41 | chaos1 | is there something like five live |
| 00:17.44 | _Sam-- | idefisk |
| 00:17.51 | *** join/#asterisk diegomsp (n=diego@200.162.8.226) |
| 00:18.15 | mjmtaiwan | chaos1: ? |
| 00:18.18 | _Sam-- | http://www.asteriskguru.com/tutorials/idefisk_softphone.html |
| 00:18.27 | _Sam-- | that is an iax softclient |
| 00:18.42 | *** part/#asterisk darkskiez (n=darkskie@bb-87-81-62-203.ukonline.co.uk) |
| 00:19.26 | chaos1 | Thanks _Sam-- |
| 00:20.02 | Ariel_ | thazza, damm oh well |
| 00:24.14 | chaos1 | an expert opinion needed for this situation: a call received by asterisk,to be forwarded to agents registered on some other non-asterisk proxy so that the call is forwarded only to those agents that are not busy |
| 00:24.18 | chaos1 | how do I go about that? |
| 00:24.22 | chaos1 | ;) |
| 00:25.16 | chaos1 | justinu:xlite rocks |
| 00:25.39 | *** join/#asterisk Habakuk (n=andy@65.89.31.126) |
| 00:25.40 | chaos1 | _Sam--:do you have any thoughts for my question |
| 00:28.04 | *** join/#asterisk cassio- (i=cassio-@201008000184.user.veloxzone.com.br) |
| 00:28.21 | cassio- | can someone help me with a file? |
| 00:28.54 | *** join/#asterisk los415 (i=los415@los.race.com) |
| 00:29.04 | *** join/#asterisk killer-ch (n=killer-c@quasimodo.csn.tu-chemnitz.de) |
| 00:29.26 | *** join/#asterisk konfuzed (n=KonfuzeD@H135.C72.B0.tor.eicat.ca) |
| 00:29.28 | cassio- | let me explain better, a guy installed a addon that picks up the next available line, I see it in my first asterisk server, but I want to put it on the second, but the guy is missing, can someone as least see the file and give me a little help? |
| 00:31.28 | mjmtaiwan | chaos1: I don't understand your last remark "mjmtaiwan:do u pronounce the j as y" |
| 00:33.17 | *** join/#asterisk Gunnar (n=gunnar@34.80-203-209.nextgentel.com) |
| 00:34.00 | *** join/#asterisk BlueDevi1 (n=BlueDevi@scooby.csn.tu-chemnitz.de) |
| 00:34.02 | _Sam-- | chaos1: i would say to haev your agents log into the asterisk box :) |
| 00:34.07 | Ariel_ | chaos1, if asterisk does not control the register I don't know how it knows the user is busy. |
| 00:35.09 | _Sam-- | since asterisk handles agent logins and queues fine...there would be no reason to forward to the non-asterisk proxy if you logged your agents into the asterisk machine also |
| 00:36.05 | *** join/#asterisk stkn_ (n=stkn@gentoo/developer/pdpc.active.stkn) |
| 00:41.39 | *** join/#asterisk kyo (n=kio@ool-4577ae5e.dyn.optonline.net) |
| 00:44.47 | [av]bani | yay ubuntu |
| 00:46.36 | *** part/#asterisk mroth_afk (n=mroth@63.65.26.220) |
| 00:47.16 | Zodiacal | will asterisk benefit from a hyper threading cpu? |
| 00:48.23 | *** join/#asterisk xheliox (n=jeff@pdpc/supporter/active/xheliox) |
| 00:49.09 | *** join/#asterisk stkn__ (n=stkn@gentoo/developer/pdpc.active.stkn) |
| 00:49.15 | [av]bani | does anything? |
| 00:49.19 | Ariel_ | Zodiacal, the older one did not. In fact the zaptel worked better when hyper threading was turned off |
| 00:49.29 | Ariel_ | [av]bani, ubuntu...???? |
| 00:49.41 | Zodiacal | ariel hrmm maybe thast my problem.. |
| 00:49.46 | Zodiacal | i'll try turning it off |
| 00:50.31 | Ariel_ | for some reason it would give echo on the channels |
| 00:51.38 | Zodiacal | oh thats not my issue |
| 00:51.43 | Zodiacal | mines still that damn dial delay |
| 00:52.24 | _Sam-- | [av]bani: if you want me to test anything with the gxp let me kno |
| 00:53.12 | *** join/#asterisk justinu (n=Justin@cpe-72-129-86-208.socal.res.rr.com) |
| 00:54.50 | *** join/#asterisk angom_w (n=angom@red-corp-200.38.16.10.telnor.net) |
| 00:55.04 | glm2k | Zodiacal: dial delay? |
| 00:55.27 | Zodiacal | glm2k yeah, when i dial out using my digium pstn card it takes 6 seconds before it rings on both sides |
| 00:56.04 | glm2k | hmm, doesn't happen on my end. using a te110p |
| 00:56.06 | *** join/#asterisk Naturalblue (n=Kay@195.26.12.229) |
| 00:56.30 | Zodiacal | tdm400p with x100 fxo cards here |
| 00:56.38 | glm2k | i know there's a delay for CID when dialing in, but dialing out? *scratches head* |
| 00:56.46 | Zodiacal | dialing in is instant |
| 00:56.51 | Zodiacal | i disabled CID |
| 00:56.57 | glm2k | aye |
| 00:57.06 | glm2k | same here, i don't have it anyway :) |
| 00:57.17 | Zodiacal | even if i use two analog phones and call each other (i have multiple lines) its instant.. so its not the phone co. i don't think |
| 00:57.44 | *** part/#asterisk Naturalblue (n=Kay@195.26.12.229) |
| 00:57.45 | Zodiacal | heres my post that some guys are trying to help me with, i posted my logs too... do you get this in your logs during calls? http://forums.digium.com/viewtopic.php?p=13294 |
| 00:57.48 | Zodiacal | all the exceptions etc? |
| 00:58.01 | glm2k | gimme a sec, dialing out... |
| 00:58.14 | Zodiacal | np take yer time :) any help is greatly appreshated |
| 00:58.14 | *** join/#asterisk N0S3 (n=terminal@host99.200-82-106.telecom.net.ar) |
| 00:59.03 | Zodiacal | bbn in 20 seconds, going to go flip my server on w/o HT. |
| 00:59.36 | Weezey | yeah, hooker thermometer doesn't help these days. |
| 00:59.51 | glm2k | sorry, clear a newborn babe's arse. no debug messages when calling out |
| 01:00.25 | glm2k | oh and if it helps, i have a really hacked 2005-08 version of * on 2 servers and they both have HT off |
| 01:01.38 | Zodiacal | glm2k no debug messages in your full logs? or the cli? |
| 01:02.41 | MikeJ[Laptop] | http://www.ipchicken.com/ |
| 01:02.51 | MikeJ[Laptop] | that's funny ^^^^ |
| 01:03.00 | fdask | why |
| 01:03.14 | hardwire | it just is |
| 01:03.18 | glm2k | i had a debug log as well as a messages log set to debug and notice,warning,error respecively |
| 01:03.21 | hardwire | whyt associate a chicken with an IP address? |
| 01:03.23 | hardwire | see |
| 01:03.24 | hardwire | funny |
| 01:03.38 | *** join/#asterisk dca[laptop] (i=user@30.sub-70-218-252.myvzw.com) |
| 01:03.40 | glm2k | we need IPv6 so the chicken can cross the internet! |
| 01:03.50 | hardwire | oh dear lord |
| 01:04.07 | MikeJ[Laptop] | see... funny... |
| 01:04.12 | MikeJ[Laptop] | funny like sheep... |
| 01:04.23 | *** join/#asterisk xheliox (n=jeff@user-0c6s3h2.cable.mindspring.com) |
| 01:04.35 | Weezey | to get to your mom? |
| 01:04.46 | rob0 | Thrill-seeking |
| 01:05.15 | Weezey | dude, seriously, it's time to get out of the house |
| 01:05.17 | hardwire | I am so tired |
| 01:05.21 | Weezey | you're starting to smell. |
| 01:05.24 | hardwire | is asterisk 1.2.8 out yet? |
| 01:05.37 | MikeJ[Laptop] | hardwire, yes... |
| 01:05.39 | glm2k | Weezey: lol. i am out of the house. |
| 01:05.48 | justinu | lets get off moms... cuz i just got off yours |
| 01:05.53 | *** join/#asterisk jyukes (n=jameshot@pool-138-89-229-250.atc.east.verizon.net) |
| 01:05.56 | MikeJ[Laptop] | glm2k, you need to spend less time away from the house on irc |
| 01:06.19 | glm2k | hmm, according to my logs, i haven't been here in months :) |
| 01:06.42 | Weezey | asterisk taught me how to spell convenient. |
| 01:07.18 | MikeJ[Laptop] | spell check taught me to spell |
| 01:07.27 | hardwire | how long do you think asterisk 1.2.4 will sit there on the top of the changelog? |
| 01:07.29 | Qwell | Weezey: tought me how to spell "sto wh co" |
| 01:07.36 | Weezey | heh |
| 01:07.41 | Qwell | taught..heh |
| 01:07.54 | Qwell | That word somehow started as touch |
| 01:07.56 | MikeJ[Laptop] | hardwire, until 1.2.5 is released |
| 01:07.59 | Weezey | is there a trick to getting DTMF to work over IAX2? |
| 01:08.05 | Qwell | Weezey: press buttons |
| 01:08.13 | MikeJ[Laptop] | Weezey, ummmmmm |
| 01:08.13 | hardwire | MikeJ[Laptop]: that is not a measurable amount of time :) |
| 01:08.16 | hardwire | bbl |
| 01:08.16 | justinu | swear |
| 01:08.17 | Weezey | Qwell: Allison only hears the first digit. |
| 01:08.34 | MikeJ[Laptop] | speak up! |
| 01:08.59 | MikeJ[Laptop] | Weezey, allison doesn't really listen to all the numbers.. that's just a rumor... |
| 01:09.08 | MikeJ[Laptop] | it's actually the computer doing it |
| 01:09.13 | Qwell | MikeJ[Laptop]: LIES! |
| 01:09.33 | Qwell | I DTMF'd a few at Astricon, and she read back every tone! |
| 01:12.36 | Weezey | I need a better source of PAP2s |
| 01:12.43 | Qwell | ebay? |
| 01:12.44 | *** join/#asterisk miguel3239_ (n=chatzill@h-68-167-124-170.cmbrmaor.covad.net) |
| 01:12.56 | Weezey | I dislike ebay |
| 01:13.01 | Weezey | I constantly lose. |
| 01:13.04 | MikeJ[Laptop] | it dislikes you |
| 01:13.08 | Weezey | yeah |
| 01:13.16 | MikeJ[Laptop] | I should go write some code |
| 01:13.27 | Weezey | I'm all like "Bitch, just lemme win the fuckin' 7940!" |
| 01:13.33 | Weezey | and ebay talks back. |
| 01:13.46 | Weezey | MikeJ[Laptop]: I wrote some sweet AGI the other day. |
| 01:14.44 | Weezey | MikeJ[Laptop]: "The number you have dialed is an international call, your call will be completed for X dollars and X cents per minute. Press 1 to continue. or hang up." |
| 01:15.09 | Weezey | Gets the mySQL data and parses it up for the rates. |
| 01:16.11 | Ariel_ | Weezey, post on the -biz list to see if anyone has some. I saw some on voipsupply.com the other day. |
| 01:16.48 | Weezey | yeah, the only problem with voip supply is they got my address wrong the first time |
| 01:16.57 | Weezey | so they keep shipping my stuff to the wrong city. |
| 01:17.19 | Weezey | bah, updating did bupkiss. |
| 01:17.45 | *** join/#asterisk A-Tuin (n=a-tuin@steves.ip.v4.me.uk) |
| 01:17.55 | Weezey | allison still doesn't let me check my voicemail. 841 ---SIP---> * box 1 ---IAX2---> voicemailmain on * box 2 |
| 01:18.20 | Weezey | anything SIPped to box 1 can though. |
| 01:18.25 | Ariel_ | Weezey, have you called them on the phone. |
| 01:18.36 | Weezey | yeah |
| 01:18.50 | Weezey | Fred Rob didn't help |
| 01:19.13 | Weezey | You can call them via their asterisk box too |
| 01:19.31 | Ariel_ | really |
| 01:19.49 | Ariel_ | how |
| 01:20.09 | Weezey | yep, SIP/0@asterisk.b2llc.com is reception |
| 01:20.20 | Weezey | I belive 45 is my rep. |
| 01:20.29 | Weezey | maybe 47 |
| 01:20.32 | Weezey | haven't called in a while. |
| 01:21.21 | Weezey | hmm doesn't seem to work anymore |
| 01:21.52 | Ariel_ | I know that they changed there box out to Fonality |
| 01:23.15 | *** join/#asterisk Naturalblue (n=Kay@195.26.12.229) |
| 01:23.28 | Weezey | Joe's pretty good to |
| 01:23.45 | Weezey | it's those other sales lackeys that got my account all buggered |
| 01:23.54 | Weezey | so I drove down to pick up my last order. |
| 01:24.04 | *** join/#asterisk mosty (i=mostynm@adsl-137-244.swiftdsl.com.au) |
| 01:24.15 | Weezey | never doing that again, bringing shit accross the border takes forever |
| 01:24.25 | Ariel_ | wow so you live up north in the cold weather area. |
| 01:24.58 | Weezey | It's not cold up here these days. |
| 01:25.00 | Weezey | sucks. |
| 01:25.03 | Weezey | I miss my winter. |
| 01:25.32 | Weezey | Flore-da! |
| 01:25.46 | Weezey | or Taxachusetts? |
| 01:25.50 | mosty | i have some cdr entries which i can't figure out the source for. the channel is "SIP/incoming-<randomnumber>", when i was expecting something like "SIP/extensionnumber-randomnumber" |
| 01:26.02 | Ariel_ | Yes Homestead Florida |
| 01:26.31 | Weezey | incoming == "incoming" or the IP? |
| 01:26.45 | Ariel_ | mosty, it might have died before going to a sip device |
| 01:26.45 | Weezey | mmm, dinner's ready |
| 01:26.46 | mosty | Weezey: the string "incoming" |
| 01:27.00 | Weezey | dinner at 8:30 sucks though. |
| 01:27.11 | Weezey | bbl for DTMFing. |
| 01:27.56 | mosty | ariel: the call lasted about 40 minutes |
| 01:28.10 | Ariel_ | Weezey, voxilla has some pap2 as well.... |
| 01:28.59 | mosty | ariel: that's the source channel, but what does "incoming" mean? i can't find that string in my extensions.conf or sip.conf |
| 01:29.18 | Ariel_ | mosty, you context where the call came in on |
| 01:29.51 | Ariel_ | you/your |
| 01:30.27 | mosty | ariel: but i don't have a context called "incoming" in my dialplan |
| 01:32.03 | mosty | in all the other cdr entries, the channel field looks like SIP/<sip_client_number>-<random_number> |
| 01:37.40 | *** join/#asterisk Habakuk (n=andy@65.89.29.5) |
| 01:38.44 | Qwell | What's the difference between the SPA 2002 and 2100? |
| 01:39.07 | [av]bani | Qwell: 98 ? |
| 01:39.14 | Qwell | at least |
| 01:39.32 | Qwell | Does the 2100 just have the extra ethernet port? |
| 01:41.28 | Nugget | the 2100 can also make espresso. |
| 01:42.38 | *** join/#asterisk kc5cqm (n=kc5cqm_@cpe-68-206-116-214.stx.res.rr.com) |
| 01:42.48 | kc5cqm | hello |
| 01:43.33 | *** join/#asterisk _8ball (n=spunk@64-13-46-242.eug.clearwire-dns.net) |
| 01:46.02 | kc5cqm | noticed something weird today... had my asterisk box at home set to transfer a call to my work extension. Had a co-worker call to test it from his phone. The caller ID on my office phone showed a company callerID number, not my home line. Is it know for voicepulse to run promiscuous callerID? |
| 01:46.23 | kc5cqm | I'm lost |
| 01:46.24 | *** part/#asterisk shido6 (n=shido@d221-68-216.commercial.cgocable.net) |
| 01:46.32 | Nugget | what does "promiscuous callerid" mean? |
| 01:46.44 | kc5cqm | you get to set the callerID string |
| 01:46.49 | Nugget | yes, that's correct. |
| 01:46.49 | Qwell | one that runs around with other CIDs and goes bar hopping |
| 01:46.59 | kc5cqm | ;-) |
| 01:47.26 | kc5cqm | I didn't think many providers would allow it...guess voicepulse is more "business oriented" and pbx friendly |
| 01:47.48 | kc5cqm | still...could be really abused in the wrong hands |
| 01:48.08 | Nugget | is "promiscuous callerid" a term you just made up, or have I just totally missed that phrase in the year or so I've been using asterisk? |
| 01:48.24 | kc5cqm | I pulled it from the depths of my mind |
| 01:48.26 | justinu | kc5cqm de k6xbrge sk |
| 01:48.27 | kc5cqm | or other places |
| 01:48.36 | justinu | k6xbr ge sk |
| 01:48.40 | Nugget | it doesn't really make sense, and google's got 0 hits on the phrase. |
| 01:48.42 | kc5cqm | no, seriously...I heard it on /. about a year ago on something discussing nuphone |
| 01:48.59 | kc5cqm | ;-) k6xbr de kc5cqm. QSY to HF? |
| 01:49.05 | justinu | i wish |
| 01:49.16 | justinu | i want to build an antenna |
| 01:49.25 | justinu | but i need geekpower help |
| 01:49.37 | kc5cqm | geekpower huh? |
| 01:49.43 | justinu | yeah, sorta like manpower |
| 01:49.46 | justinu | only geekier |
| 01:49.49 | dogtanian | what do you want an antenna for? |
| 01:49.50 | Nugget | manxpower? :) |
| 01:49.54 | justinu | lol |
| 01:49.55 | justinu | HF |
| 01:50.07 | kc5cqm | gonna get yoru general first? |
| 01:50.07 | justinu | i want to get my general and do SSB/CW |
| 01:50.16 | justinu | but I need to have the antenna as the motivator |
| 01:50.20 | dogtanian | single sideband morse? |
| 01:50.25 | justinu | otherwise i'll never do it |
| 01:50.26 | dogtanian | are you a radio amateur? |
| 01:50.30 | justinu | yeah, SSB and CW |
| 01:50.40 | justinu | yeah |
| 01:50.44 | dogtanian | CW doesn't need a sideband |
| 01:50.45 | kc5cqm | typically you don't havy any sidebands with morse, only a carrier wave |
| 01:50.58 | justinu | i don't want to do more on SSB |
| 01:50.58 | kc5cqm | there is modulated CW...that has sidebands |
| 01:50.59 | *** join/#asterisk kietlak (n=kietlak@11-mo3-6.acn.waw.pl) |
| 01:51.04 | kc5cqm | waste of space imho |
| 01:51.12 | justinu | i just want to do SSB or CW |
| 01:51.31 | dogtanian | which one? |
| 01:51.34 | dogtanian | lol |
| 01:51.34 | justinu | both |
| 01:51.34 | kc5cqm | get a tuner justinu...amazing what you can do with 60' of wire outside and a good ground |
| 01:51.38 | kc5cqm | or a rainspout |
| 01:51.48 | kc5cqm | or something metal and not too close to flesh |
| 01:51.58 | dogtanian | 1/4 wavelength's are easy to make |
| 01:51.59 | justinu | i was gonna buy one of those kenwood 700 series transceivers |
| 01:52.23 | kc5cqm | I've got an Icom 706MKIIG and a kenwood TR-9000 here at the house |
| 01:52.24 | dogtanian | or just a bit of wire cut to size (dipole) |
| 01:52.32 | kc5cqm | and a double-bazooka 40m antenna |
| 01:52.45 | justinu | i need some kind of pole |
| 01:52.50 | dogtanian | well tbh both of those sound a bit too sophisticated for CW |
| 01:52.50 | kc5cqm | a 1/4 wave vertical is easy for 20m and up |
| 01:52.54 | Qwell | justinu: heh heh heh |
| 01:53.02 | mosty | does the the "type" setting for iax entries have the same meaning as for sip entries? |
| 01:53.02 | Qwell | I've got yer pole right here |
| 01:53.03 | justinu | but i want to run low band |
| 01:53.12 | justinu | Qwell: sick fuck |
| 01:53.23 | kc5cqm | hey justinu, a TDM400 has a mode to key radios PTT and detect COS |
| 01:53.25 | dogtanian | 1/4 wave can be used for any freq |
| 01:53.36 | kc5cqm | tuners work |
| 01:53.40 | justinu | yeah, i heard the presentation at astricon |
| 01:53.40 | dogtanian | in fact any harmonic-multiple will work |
| 01:53.53 | kc5cqm | I run all the way to 80m mobile |
| 01:53.53 | Qwell | app_rpt? |
| 01:54.07 | justinu | i want to talk to bhutan |
| 01:54.13 | dogtanian | also, you'll need a license |
| 01:54.16 | dogtanian | heh |
| 01:54.19 | justinu | i have a license |
| 01:54.20 | kc5cqm | I'd love to tie in a 2m radio to my * box |
| 01:54.22 | justinu | just not a general |
| 01:54.24 | dogtanian | i was just looking at flights to bhutan :) |
| 01:54.32 | dogtanian | going from bangladesh |
| 01:54.53 | justinu | nice |
| 01:54.56 | dogtanian | http://www.drukair.com.bt/ |
| 01:54.56 | justinu | always wanted to go there |
| 01:55.03 | dogtanian | i ahve a lot of air-miles i need to spend |
| 01:55.06 | kc5cqm | I thouht about going to Quatar |
| 01:55.09 | dogtanian | nahh |
| 01:55.13 | dogtanian | quatar sucks |
| 01:55.16 | justinu | read lots of stuff about bhutan years ago |
| 01:55.23 | kc5cqm | it's damn windy here......brb...gotta check my antennas |
| 01:55.28 | kc5cqm | 45 mph |
| 01:55.29 | dogtanian | quatar is just a rubbish boring arab city |
| 01:55.50 | kc5cqm | is it a dry country? |
| 01:56.00 | dogtanian | yes. although its on the coast too |
| 01:56.12 | kc5cqm | oh well...it would be to make a few bucks |
| 01:56.12 | dogtanian | it's very flat |
| 01:56.24 | dogtanian | heh. you'd have to live under shaira law |
| 01:56.25 | kc5cqm | I live on the Texas Gulf Coast...very flat too |
| 01:56.29 | dogtanian | amm |
| 01:56.44 | justinu | kc5cqm: i want to work 160 meters |
| 01:56.54 | dogtanian | not sure if you'd be a big hit in quatar in that case |
| 01:57.03 | dogtanian | one of my ex-flatmates was from there |
| 01:57.07 | kc5cqm | I'm in Corpus Nugget |
| 01:57.15 | kc5cqm | I've never been on 160M |
| 01:57.18 | kc5cqm | not here anyway |
| 01:57.21 | justinu | why not? |
| 01:57.22 | Nugget | cool. I fly down to mustang beach a lot during the summer. |
| 01:57.29 | kc5cqm | no antenna for it |
| 01:57.30 | Nugget | not far up the coast from you |
| 01:57.34 | kc5cqm | brb... |
| 01:57.37 | justinu | see, i want an antenna for 160m |
| 01:57.49 | justinu | any of you guys pilots? ever fly an sr22? |
| 01:57.54 | Nugget | yes. no. |
| 01:58.00 | dogtanian | kc5cqm: to transmit to bhutan you'd probablly have to bounce the signal off the moon |
| 01:58.07 | dogtanian | ...or the ionosphere |
| 01:58.13 | Nugget | heck, my fbo just recently got their first g1000 182. :) |
| 01:58.17 | *** part/#asterisk RoyK (n=roy@10.80-203-106.nextgentel.com) |
| 01:58.22 | justinu | i'm amazed |
| 01:58.28 | justinu | it's a very very nice plane |
| 01:58.36 | Nugget | yeah, they do look very nice |
| 01:58.48 | justinu | it does 145 indicated at 12000 feet |
| 01:58.52 | justinu | 175 groundspeed |
| 01:58.58 | Nugget | I'll buy one if flightaware ever IPOs. :) |
| 01:59.08 | *** join/#asterisk sancho (n=user@adsl-67-121-107-88.dsl.irvnca.pacbell.net) |
| 01:59.08 | justinu | avionics are amazing |
| 01:59.17 | justinu | the avidyne system is great |
| 01:59.22 | Qwell | woah, did you guys hear that? |
| 01:59.35 | Qwell | That was the sound of radio stuff going miles over my head. :p |
| 01:59.42 | Nugget | heh |
| 01:59.48 | Qwell | (pun only partially intended) |
| 01:59.58 | dogtanian | heh :) |
| 02:00.26 | dogtanian | i used to have a radio amateur licence a few years back |
| 02:00.30 | dogtanian | don't ahve time for it now though |
| 02:00.39 | justinu | my license is good for life |
| 02:00.44 | dogtanian | besides, everywhere's connected to the internet |
| 02:00.45 | newl | -.-. --.- |
| 02:01.06 | Nugget | my dad's ham license is one of those "good for life" ones. |
| 02:01.07 | newl | dogtanian: except when those pesky floods and hurricanes happen. :) |
| 02:01.18 | dogtanian | although when I'm watching LOST i often think how easy it'd be to make a transmitter out of teh plane wreckage |
| 02:01.26 | Nugget | I was never able to muster up any interest in amateur radio, though. modems made it seem pretty irrelevant to me. |
| 02:01.40 | *** part/#asterisk Alric (n=nbowyer@masq.hyperusa.com) |
| 02:01.49 | dogtanian | newl: that's what iridium sat-phones are for |
| 02:02.13 | newl | Nugget: same here. I was fully capable of passing the 13wpm code, and theory tests for general license but the computer was more interesting. |
| 02:02.16 | dogtanian | ....which reminds me... do you guys think it'd be possibe to connect an iridium sat phone to asterisk? |
| 02:02.26 | newl | iridium haha crap coverage |
| 02:02.33 | newl | globalstar isn't much better |
| 02:02.35 | dogtanian | pretty cheap tho |
| 02:02.59 | newl | though when you're out in the sticks, it's better than nothing |
| 02:02.59 | dogtanian | is globalstar any good with data? |
| 02:03.23 | dogtanian | what i really want to do is transmit video |
| 02:03.23 | newl | couldn't say. I've only used both for voice. |
| 02:03.28 | dogtanian | hmm |
| 02:03.57 | newl | justinu: yes, avionics are cool :) |
| 02:04.24 | dogtanian | cool :) |
| 02:04.39 | justinu | the avidyne avionics are very nice |
| 02:04.42 | dogtanian | i was thinking of joining Tactical Communications in teh RAF |
| 02:04.45 | justinu | i'm impressed with the presentation |
| 02:05.10 | newl | dogtanian: ya can't really go wrong with military techinical training. |
| 02:05.15 | dogtanian | yah |
| 02:05.40 | dogtanian | i have a good engineering hons degree so it'd be pretty easy for me to get in as an officer |
| 02:05.48 | dogtanian | i'm a banker atm tho :/ |
| 02:05.57 | dogtanian | getting a bit dishartened with it tho :/ |
| 02:05.58 | newl | hey..whatever pays the bills I say. :) |
| 02:06.11 | dogtanian | yeah... true... but that only works up to a point |
| 02:06.23 | dogtanian | not enough excitment for me |
| 02:06.31 | mosty | is it possible for unknown sip clients to connect to an asterisk machine without registering? |
| 02:06.53 | Nugget | mosty: yes |
| 02:07.21 | mosty | nugget: how is that done, and how can i turn it off? |
| 02:07.51 | Nugget | point the default context for [general] in sip.conf to someplace safe. |
| 02:08.49 | mosty | nugget, hmm i though i had done that already :/ |
| 02:08.56 | Nugget | then you're fine |
| 02:09.12 | *** join/#asterisk TheCops (i=nobody@got.securebinary.com) |
| 02:09.13 | *** join/#asterisk deidre (i=uyiii@stevanus.centrin.net.id) |
| 02:09.28 | dogtanian | that reminds me... i think i have a registration problem too... i'm on a dynamic IP and use dyndns to resolve to my * box... but i sometimes find that i can't initiate outgoing calls (IAX2)... although if i use a PSTN phone to call my * box (and let it ring a bit) and then try to make an IAX2 outgoing call then it works perfectly |
| 02:09.28 | TheCops | Someone seen this error message? format_wav.c:247 update_header: Unable to find our position |
| 02:09.52 | dogtanian | its really confusing me since i'm a bit of a * noob |
| 02:10.03 | deidre | hi did anyone get any luck with using intel 536EP as X100P clone? |
| 02:11.06 | dogtanian | any ideas anyone? |
| 02:11.14 | mosty | nugget: i'm trying to figure out this mystery sip src channel, which looks like SIP/incoming-<random_string> in the CDR entry. do you have any ideas where this "incoming" client comes from? the string does not appear in any of my config files as an extension |
| 02:11.49 | Nugget | dunno, sorry. |
| 02:12.23 | *** join/#asterisk ctooley (n=ctooley@jc1-111.moment.net) |
| 02:12.25 | *** part/#asterisk ctooley (n=ctooley@jc1-111.moment.net) |
| 02:13.13 | *** join/#asterisk FastJack_ (i=fastjack@p5091CDCF.dip.t-dialin.net) |
| 02:14.57 | kc5cqm | deidre, I have a cheapie x101p working...like $8 on ebay now |
| 02:15.47 | kc5cqm | anyone have trouble with routing their default context to an extension? like annoying random calls? |
| 02:23.59 | *** join/#asterisk mogorman (i=root@user-24-236-84-48.knology.net) |
| 02:26.32 | *** join/#asterisk mis (n=mis@static-66-182-95-76.bbsc.net) |
| 02:27.49 | *** join/#asterisk bluecrow_76 (n=Mitch@ip24-250-77-177.br.br.cox.net) |
| 02:28.41 | mis | wondering if anyone can help me with a problem.... I have an fxo card that I have connected to my phone line in my home for testing asterisk. I want to be able to keep asterisk connected to my phone line, but since I do not have an FXS card the PBX picks up outgoing calls also. |
| 02:29.12 | Nugget | I don't understand what you mean, mis. |
| 02:31.47 | mis | I think I am really not going to be able to solve this problem... but I figured I would try the IRC to see if anyone had done what i wanted to do. I have a PBX box that I have an FXO Card in. I plugged my PBX into my home phone line jack in a room in my house. I do not have a FXS card for analog phones. |
| 02:33.42 | mis | This setup is fine for making outgoing phone calls from IP Softphones, or answering incomeing calls on the house PSTN line through the FXO card, but if I want to make a normal phone call out on the analog phones in my house, the FXO card thinks that it is receiving a call because the line the calling analog phone is plugged into is the same line that runs into the FXO card on the asterisk server. |
| 02:34.30 | mis | I tried several ways to match the phone number of my home to route and ignore, so that asterisk would not pick up outgoing (normal) analog phone calls |
| 02:35.22 | mis | I have not been successful at this yet. I am wondering if I just have to sink some cash into a FXS card and then place my PBX between my outgoing PTSN line and my house phones |
| 02:35.41 | mis | Was that any clearer? |
| 02:37.08 | [av]bani | the inside phone picking up the line confuses the x100 into thinking the line is ringing |
| 02:37.59 | *** join/#asterisk Assid (n=assid@203.115.64.14) |
| 02:38.00 | [av]bani | about sums it up? |
| 02:38.02 | Assid | heya |
| 02:38.20 | *** join/#asterisk tehdely (n=delysiid@home.teambarry.org) |
| 02:38.46 | mis | I know that, but I was wondering if there was any way I could do incoming call routing and match my home phone and do nothing... |
| 02:39.36 | *** join/#asterisk svartalfheim (i=EVEAddic@pool-71-115-168-142.gdrpmi.dsl-w.verizon.net) |
| 02:53.03 | p0g0_ | mis: a couple of transistors should do it- wire the off hook in serial with the * box line- go off hook & kill the signal to *...brute force, but effective... |
| 02:55.05 | deidre | is it possible to change intel 536EP into x100p just like its older brother intel 537EP? |
| 02:59.39 | *** join/#asterisk heath__ (n=heath__@12-215-32-56.client.mchsi.com) |
| 03:01.57 | *** join/#asterisk kab0b (n=asdf@S0106001195772f19.ed.shawcable.net) |
| 03:02.24 | blackremedy | is there a way to limit a particular extension to a specific dial plan in asterisk? |
| 03:03.37 | blackremedy | Never mind...I'll answer my own question. I'm sure there has to be but, I just need to do some more home work. |
| 03:03.57 | blackremedy | 'preciate the help |
| 03:04.14 | mosty | put the sip/iax client in a particular context that's separated from the contexts you don't want them to have access to |
| 03:04.17 | _Sam-- | that is what [contexts] within extensions.conf are for |
| 03:05.27 | *** join/#asterisk zotz (n=zotz@24.231.47.175) |
| 03:05.29 | kab0b | hello i am having some troubles with outbound calling i was wondering if anyone could give me a hand? i am getting the AutoCongestion due to slow response and call failed, reason 8 |
| 03:06.24 | Assid | kab0b: are you sure its not the remote server? |
| 03:06.33 | Assid | wherever you are trying to call into |
| 03:07.03 | kab0b | i don't think it would be i have a few friends that use the same server to connect to and thiers is working fine |
| 03:07.13 | kab0b | its voipjet if you've heard of it |
| 03:07.19 | Assid | well |
| 03:07.21 | Assid | check your account |
| 03:07.34 | Assid | sometimes voipjet shows a buck in the account. but still doesnt call out |
| 03:07.49 | kab0b | ya it says i have 4.78 |
| 03:08.13 | Assid | try voipjets' other server |
| 03:08.19 | *** join/#asterisk mgf (n=mgf@r200-125-28-214-dialup.adsl.anteldata.net.uy) |
| 03:08.22 | Assid | they have a west coast and east coast |
| 03:09.01 | kab0b | ok i'll the west cause thats where i am |
| 03:09.25 | Assid | yeah if that doesnt work. tyr the east |
| 03:09.52 | Assid | my dial plan fails from east to west.. and then jumps to voicepulse if i still cant call out |
| 03:10.34 | kab0b | ya none of voipjets are working for me |
| 03:11.39 | Assid | how are you dialling? Dial(IAX2/user@voipjet ?? |
| 03:12.14 | Assid | pastebin that section of your dialplan.. and the verbose output |
| 03:12.41 | kab0b | its a perl script that is dropping a file to /spool/outgoing |
| 03:12.54 | Assid | huh |
| 03:13.58 | kab0b | when someone calls it logs thier callerid and the perlscript creates a file in the spool/outgoing folder to call the customer back right away |
| 03:14.40 | *** join/#asterisk exstatica (i=exstatic@redline.mednor.net) |
| 03:15.31 | Assid | okay but you prolly have a dialplan first.. |
| 03:15.41 | kab0b | ok i'll paste that first |
| 03:15.47 | Assid | and you prolly can set verbose and see the variables |
| 03:16.12 | kab0b | actaully i think i found it i was sending it to the wrong exten |
| 03:17.27 | kab0b | this is what i have http://pastebin.com/537981 |
| 03:17.42 | kab0b | thats the dial plan part after the script |
| 03:19.02 | kab0b | right now what i have been doing is just saving a file to the outgoing folder cause i don't think the formatting for the file is right in the dial plan |
| 03:19.03 | Assid | well.. if you solved it.. no isseues |
| 03:20.08 | kab0b | nope didn't work |
| 03:22.03 | kab0b | i'm getting the same thing but now it also says channel IAX2/ipadress:4569-2 was never answered |
| 03:22.27 | *** join/#asterisk jaike (n=a@203.131.137.76) |
| 03:25.11 | jaike | so quiet |
| 03:25.26 | *** join/#asterisk imran (n=codentes@cpe-68-206-61-183.houston.res.rr.com) |
| 03:25.35 | jaike | 400 users with nothing to say |
| 03:26.51 | *** join/#asterisk pigpen2 (n=mark@fw.seamans.cc) |
| 03:31.05 | *** join/#asterisk imran (n=codentes@cpe-68-206-61-183.houston.res.rr.com) |
| 03:34.17 | *** join/#asterisk imran (n=codentes@cpe-68-206-61-183.houston.res.rr.com) |
| 03:35.46 | *** join/#asterisk NoVaZuR (n=novazur@ALamentin-104-1-36-205.w81-248.abo.wanadoo.fr) |
| 03:35.46 | *** join/#asterisk sigmounte (n=sigmount@LSt-Amand-152-33-38-41.w82-127.abo.wanadoo.fr) |
| 03:35.52 | NoVaZuR | hi |
| 03:37.04 | NoVaZuR | with phonesystems as provider, I have a lot of warnings in my logs : "WARNING[14284]: chan_sip.c:9606 handle_response_register: Got 200 OK on REGISTER that isn't a register". All seem to work, but is it possible to help me to correct this ? |
| 03:37.51 | *** part/#asterisk mosty (i=mostynm@adsl-137-244.swiftdsl.com.au) |
| 03:39.09 | *** join/#asterisk imran_ (n=imran_@cpe-68-206-61-183.houston.res.rr.com) |
| 03:41.15 | *** part/#asterisk imran_ (n=imran_@cpe-68-206-61-183.houston.res.rr.com) |
| 03:41.38 | NoVaZuR | nobody ? |
| 03:44.18 | heath__ | NoVaZuR: just pretend like you don't see those.. it's my understanding that they don't hurt anything |
| 03:48.32 | *** join/#asterisk mariet53 (i=mariet53@200.127.63.228) |
| 03:49.15 | *** part/#asterisk mariet53 (i=mariet53@200.127.63.228) |
| 03:49.46 | *** join/#asterisk alexhopper (n=a27386@CPE000103d29ae2-CM001225dfdfe0.cpe.net.cable.rogers.com) |
| 03:50.06 | *** join/#asterisk bmg505 (n=leon@dsl-146-10-217.telkomadsl.co.za) |
| 03:55.21 | SkramX | no, i just had to restart |
| 03:55.23 | SkramX | oops |
| 04:02.13 | deidre | anybody know about using intel 536EP as x100p clone? is it possible? |
| 04:02.49 | *** join/#asterisk mattwj2005 (n=Matt@dialup-4.159.98.191.Dial1.Chicago1.Level3.net) |
| 04:04.22 | *** part/#asterisk mattwj2005 (n=Matt@dialup-4.159.98.191.Dial1.Chicago1.Level3.net) |
| 04:04.26 | *** join/#asterisk inv_arp (i=methodpo@71.196.20.92) |
| 04:04.26 | trixter | in asteirsk if I have N g729 licesnes, and an additional call comes in for g729 how does asterisk deal with that? dump the call or negotiate a new codec? if it negotiates a new codec how? since multiple channels can in theory use the codec it has to be channel independant whatever it does |
| 04:04.53 | trixter | prior to the additional call all N licenses are in use |
| 04:05.06 | *** join/#asterisk tobeycaesar (n=kanon@210.1.12.18) |
| 04:05.42 | *** part/#asterisk tobeycaesar (n=kanon@210.1.12.18) |
| 04:05.58 | *** join/#asterisk imran (n=imran@cpe-68-206-61-183.houston.res.rr.com) |
| 04:06.10 | imran | # Appears as ANNA |
| 04:06.16 | *** join/#asterisk coppice (n=chatzill@19.197.17.210.dyn.pacific.net.hk) |
| 04:07.07 | *** part/#asterisk NoVaZuR (n=novazur@ALamentin-104-1-36-205.w81-248.abo.wanadoo.fr) |
| 04:07.11 | Nugget | # Appears as ARMANDO |
| 04:07.30 | file | # Appears as FILE |
| 04:07.55 | *** join/#asterisk mattwj2005 (n=Matt@dialup-4.159.98.191.Dial1.Chicago1.Level3.net) |
| 04:08.16 | mattwj2005 | so whatz the deal? Irc now supports voice? |
| 04:08.55 | Nugget | (#G010E376RM1) Why are you using ms comic chat?!?! |
| 04:09.37 | mattwj2005 | lol.....actually I am using gaim......I see there is a voice functionality on this server |
| 04:10.38 | methodz | can 1u cases take normal atx mobo's? |
| 04:11.00 | Nugget | I've never seen one that could |
| 04:11.17 | *** join/#asterisk imran_ (n=codentes@cpe-68-206-61-183.houston.res.rr.com) |
| 04:11.22 | mattwj2005 | voice <nick1> [nick2] ...: Grant channel voice status to someone. You must be a channel operator to do this. |
| 04:11.27 | methodz | hmm newegg has http://www.newegg.com/Product/Product.asp?Item=N82E16811127044 |
| 04:11.39 | Nugget | voic has nothing to do with voice, mattwj2005. |
| 04:11.47 | Nugget | it's +v, for moderated channels |
| 04:12.30 | mattwj2005 | oh gotta you thanks nugget |
| 04:12.57 | mattwj2005 | I thought it was a functionality like yahoo instant messager |
| 04:13.22 | *** join/#asterisk heison (n=heison@CPE000a01d49e6f-CM00111a59bec2.cpe.net.cable.rogers.com) |
| 04:13.28 | mattwj2005 | you know.....you can "call" people with it |
| 04:14.13 | mattwj2005 | what can I say....I am all about the voip thing :) |
| 04:14.17 | *** join/#asterisk Prival (i=user65@Kitchener-HSE-ppp3571800.sympatico.ca) |
| 04:14.36 | heison | ~seen sivana |
| 04:14.41 | jbot | sivana is currently on #asterisk. Has said a total of 21 messages. Is idling for 14h 36m 25s, last said: 'the 301 is a bit weak on the lcd display'. |
| 04:14.46 | Prival | Hi, anyone knows where I can get a spec file for zaptel 1.2.3 in order to build an rpm? |
| 04:16.57 | *** join/#asterisk SibRphrek (n=SibRphre@user-12lccke.cable.mindspring.com) |
| 04:18.45 | Ariel_ | Prival, you can pull the files from cvs with the r1.2.3 tag on them |
| 04:22.06 | *** part/#asterisk imran (n=imran@cpe-68-206-61-183.houston.res.rr.com) |
| 04:22.33 | heison | hi, if anyone can help.... I'm buliding zaptel (svn checkout 1.2.3) on sarge on 2.6.8, and I'm getting a bunch of errors: |
| 04:23.46 | heison | zaptel.c:... warning:.... definied but not used |
| 04:24.14 | mattwj2005 | I wish some of you guys were here......I would say lets go out to the bars :P |
| 04:24.20 | heison | before the zaptel.c warnings, i also had a bunch of errors... |
| 04:24.57 | heison | include/linux/..h: error storage sizde of `mmap_sem' isn't known |
| 04:25.06 | *** part/#asterisk mattwj2005 (n=Matt@dialup-4.159.98.191.Dial1.Chicago1.Level3.net) |
| 04:25.18 | Prival | Ariel_: CVS? I toght asterisk/zaptel was under SVN... anyway, I don't see any spec in their svn... |
| 04:26.01 | Ariel_ | Prival, it can be gotten via svn or cvs |
| 04:27.19 | heison | very similiar to http://pastebin.ca/raw/191 |
| 04:28.24 | Prival | Ariel_: I can't find cvs info on their web... Can you help me out or give me the server name and repository path? |
| 04:28.54 | *** join/#asterisk imran (n=a@cpe-68-206-61-183.houston.res.rr.com) |
| 04:28.55 | Ariel_ | export CVSROOT=:pserver:anoncvs@cvs.digium.com:/usr/cvsroot |
| 04:29.20 | Ariel_ | cvs login anoncvs |
| 04:29.26 | Nugget | seems negligent to be advocating cvs use these days. cvs is deprecated. |
| 04:29.45 | Ariel_ | Nugget, yes but it's still updated |
| 04:30.06 | Nugget | if subversion is a deterrant to you, you probably shouldn't be running the development code anyway. :) |
| 04:30.31 | Ariel_ | cvs checkout -r v1-2-3 zaptel |
| 04:30.34 | Nugget | it's not like we're in the dark, ugly 1.0.x days either. digium hasn't started neglecting the releases yet. |
| 04:31.01 | Ariel_ | Nugget, I am just responding to his question. |
| 04:31.08 | Prival | Ariel_: cvs co -r v1-2-3 zaptel |
| 04:31.08 | Prival | cvs [server aborted]: no such tag v1-2-3 |
| 04:31.44 | Nugget | and I am just trolling. :) |
| 04:32.04 | Ariel_ | Prival, do cvs co -r v1-2 zaptel |
| 04:32.22 | Ariel_ | Nugget, it's ok I need to go to bed anyway |
| 04:32.49 | Prival | Ariel_: Yup, checking out right now... |
| 04:33.28 | Ariel_ | svn has more features but I have all my scripts still with cvs I am kinda used to it. |
| 04:33.44 | heison | prival: this is what i did... |
| 04:34.14 | Prival | Ariel_: Same here... I'm not sure I'm ready for the database concept of SVN. I like the file based flexibility of CVS. |
| 04:35.30 | heison | svn checkout http://svn.digium.com/svn/zaptel/tags/1.2.3 1.2/zaptel |
| 04:35.30 | Prival | Ariel_: I don't see any spec there... |
| 04:35.30 | Ariel_ | heison, I don't know debian but do you have the kernel-source |
| 04:35.47 | heison | yes, i do have the kernel source and symlinked /usr/src/linux-2.6 to the actual source /usr/src/kernel-source-2.6.8 |
| 04:36.09 | heison | i have also created a symlink to /lib/modules/`uname -r`/build |
| 04:36.51 | Ariel_ | make[1]: Leaving directory `/usr/src/linux-2.6.5-1.358' |
| 04:36.51 | Ariel_ | make: *** [linux26] Error 2 |
| 04:37.07 | Ariel_ | heison, see anything wrong with that last line |
| 04:38.27 | heison | can't spot anything obvious... |
| 04:38.37 | Ariel_ | 2.6.5 |
| 04:38.43 | Ariel_ | or 2.6.8 |
| 04:39.21 | heison | you're referring to the pastbin.ca post? |
| 04:39.29 | Ariel_ | heison, yes |
| 04:39.38 | heison | that was someone else's, sorry for the confusion... |
| 04:39.44 | heison | i have 2.6.8 |
| 04:39.50 | heison | and looks like it's now compiling... |
| 04:39.58 | heison | after i went into /usr/src/linux |
| 04:40.30 | Prival | Ariel_: Is there supposed to be a spec file in the cvs/svn ? |
| 04:40.51 | heison | make menuconfig, and changed CRC-CCITT from M to *, followed by a make under /usr/src/linux |
| 04:40.54 | Ariel_ | spec file? |
| 04:41.28 | heison | while i'm compiling the kernel, make linux26 seems to have started and ended without errors... |
| 04:42.00 | *** join/#asterisk pigpen2 (n=mark@fw.seamans.cc) |
| 04:42.22 | Prival | Ariel_: I need to build an RPM... I don't have build toold installed on our Asterisk distro. SO I need to compile a RPM on a compile station in order to then update the Asterisk station... |
| 04:42.31 | *** join/#asterisk EriSan (n=erisan@81-174-35-6.f5.ngi.it) |
| 04:42.54 | Ariel_ | you do know that there is rpm's aready made |
| 04:42.55 | heison | but i swear it's already installed as a module, in fact grep -i ccitt /lib/modules/2.6.8-2-386/* returns modules.symbols: aslias symbol:crc_ccitt |
| 04:43.20 | Prival | Ariel_: Where is that? |
| 04:43.33 | heison | anyways, i'm gonna carry on... thanks Ariel- |
| 04:43.39 | *** join/#asterisk acehunky (n=chat_jok@59.184.4.145) |
| 04:44.44 | acehunky | can anyone tell me whats the diff between asterisk-1.2.4 and asterisk-netsec-1.2.4 ? |
| 04:44.51 | Nugget | 0.0.1 |
| 04:45.28 | Ariel_ | Prival, check out ftp.linuxsys.com/pub/release |
| 04:45.50 | Nugget | acehunky: I see on digium.com (first hit for google "asterisk-netsec") says: "We are also excited to announce the release of a special version of Asterisk 1.2.2, called Asterisk-NetSec. It includes some very exciting features not available in any other version of Asterisk, or even any other related product! Please view the appropriate README and ChangeLog for more details." |
| 04:46.06 | Nugget | with link to http://ftp.digium.com/pub/telephony/asterisk/README-1.2.2-netsec |
| 04:46.16 | Nugget | which pretty much exactly answers your question. |
| 04:46.26 | Nugget | well, if it wasn't a 404. :) |
| 04:46.48 | Nugget | but README-1.2.4-netsec works and does |
| 04:47.22 | Prival | Ariel_: Yaeh, great, i386... I'm all i686 based I tried to recompile the srpms from there withour any luck... |
| 04:47.43 | Ariel_ | sorry you might try google |
| 04:48.00 | Ariel_ | I am too sleepy to look.... good night and good luck |
| 04:48.54 | acehunky | Nugget lemme lookup the url |
| 04:52.46 | *** join/#asterisk Jzalae (n=sk@dsl-66-63-110-48.gwi.net) |
| 05:02.52 | *** join/#asterisk nurfe (n=rgff@h24-207-70-68.dlt.dccnet.com) |
| 05:03.14 | *** join/#asterisk kend (n=chatzill@host-64-65-199-187.man.choiceone.net) |
| 05:03.51 | kend | What's the command to send DTMF? |
| 05:04.03 | Qwell | SendDTMF is an app I believe |
| 05:04.14 | kend | Qwell: thanks! |
| 05:05.23 | Nugget | what's the phone number for 911? |
| 05:05.41 | `Sauron | 9911 |
| 05:05.45 | `Sauron | :p |
| 05:05.45 | Qwell | 19911 |
| 05:05.49 | Nugget | haha |
| 05:07.08 | *** join/#asterisk BugKham (n=lamer@125.24.26.220) |
| 05:15.23 | svartalfheim | So are there any decent non-pc systems asterisk can run on? Like a WRT54G and what not. |
| 05:16.18 | kc5cqm | I've read about a port to the linksys |
| 05:17.07 | svartalfheim | Yea and I thought there were some others it was ported to as well. |
| 05:22.55 | heison | svartalfheim: http://www.tomsnetworking.com/Sections-article153-page1.php |
| 05:23.52 | Triffid_Hunter | i read about some guys putting asterisk on a gumstix |
| 05:24.08 | Triffid_Hunter | now that's a tiny pbx! |
| 05:24.18 | Qwell | Triffid_Hunter: yes, Kristian Kielhofner... |
| 05:24.45 | Qwell | also on the soekris and such... astlinux |
| 05:24.49 | _Sam-- | that small pbx in toms hardware has no horsepower |
| 05:24.59 | Qwell | _Sam--: it'll do a few calls |
| 05:25.10 | _Sam-- | a few...but maybe not even a small office's worth |
| 05:25.13 | Qwell | the gumstix is what, 400mhz for a good one? |
| 05:25.20 | acehunky | Nugget: didnt find any drastic difference here |
| 05:25.23 | Qwell | _Sam--: Why would you put a whole office on a gumstix? That's just be silly |
| 05:25.26 | *** join/#asterisk nestar (i=nester@makes.all.the.girlies.go.wewt.wewt.net) |
| 05:25.30 | acehunky | between asterisk and asterisk-netsec |
| 05:25.36 | Qwell | if you need a pbx in your shoe...sure, go for the gumstix |
| 05:25.38 | _Sam-- | not gumstix! the one that is pictured at the toms hardware page above |
| 05:25.51 | Qwell | oh, hold on :p |
| 05:25.52 | acehunky | here is the diff between both the readme. |
| 05:25.56 | _Sam-- | on the soekris |
| 05:25.58 | acehunky | <PROTECTED> |
| 05:25.58 | acehunky | 166a167,174 |
| 05:25.58 | acehunky | > * NETWORK SECURITY DEVICES |
| 05:25.58 | acehunky | > |
| 05:25.58 | acehunky | > This release of Asterisk contains support for network security devices |
| 05:25.59 | acehunky | > manufactured by Ranch Networks, Inc., using their MIDCOM interface |
| 05:26.01 | acehunky | > library. You will need the companion libmidcom-0.1.0.tar.gz file to |
| 05:26.02 | acehunky | > build the library. Contact Ranch Networks' support department for assistance |
| 05:26.05 | acehunky | > in building and configuring MIDCOM support. |
| 05:26.06 | Qwell | soekris, yeah |
| 05:26.07 | acehunky | > |
| 05:26.21 | _Sam-- | id rather have a mini itx |
| 05:26.22 | Qwell | soekris has a little bit of power |
| 05:26.26 | acehunky | is soekris 4801 shipping yet ? |
| 05:26.52 | Qwell | has been for months |
| 05:26.56 | Qwell | I saw one in Oct |
| 05:26.59 | acehunky | oops i mean the new one .. |
| 05:27.07 | acehunky | they said it would ship from feb 06 |
| 05:27.15 | Qwell | the -60? |
| 05:27.28 | acehunky | yeah |
| 05:27.29 | Qwell | no news on the soekris site |
| 05:27.32 | acehunky | that one. |
| 05:27.47 | acehunky | January 18, 2006 ***** NEWS ***** |
| 05:27.47 | acehunky | The net4801-60 is coming soon, a variation with 256 Mbyte SDRAM, it should start shipping in early February. |
| 05:28.35 | acehunky | Nugget: are you there ? |
| 05:29.29 | _Sam-- | the soekris 4801 is their most powerful unit? |
| 05:30.29 | acehunky | yeah _Sam-- and 4801-60 is having 256 MB RAM soldered |
| 05:30.40 | _Sam-- | but same lame cpu? |
| 05:31.02 | *** join/#asterisk elg (n=fugalh@falcon.fugal.net) |
| 05:31.09 | _Sam-- | my pda has more processing ability |
| 05:31.14 | _Sam-- | and its 2 years old |
| 05:31.55 | fdask | heh |
| 05:33.07 | svartalfheim | Man, those soekris boards seem like a ripoff. You could probably put together a mini-itx system for less money and take up just a little more space. And get a faster CPU. |
| 05:33.24 | Qwell | svartalfheim: except that it's already all there |
| 05:33.38 | _Sam-- | what is? |
| 05:33.43 | fdask | what do these boards do? |
| 05:33.57 | _Sam-- | they are computer |
| 05:33.58 | _Sam-- | s |
| 05:34.24 | _Sam-- | people program them to do anything...routers, asterisk, firewalls, etc |
| 05:34.36 | Qwell | I bet they make good APs |
| 05:34.56 | [av]bani | svartalfheim: try gumstix |
| 05:35.40 | acehunky | well gumstix turns out to be more expensive when you want most of the things |
| 05:35.44 | svartalfheim | Yea, the soekris boards have a PC-Card socket... but you can get that for mini-itx cheap as well. I don't know, I guess if space is a problem soekris is better. |
| 05:36.06 | _Sam-- | a PC Card (CF adapter) for a mini itx baord is 14 bucks |
| 05:36.21 | Nugget | my firewall is a soekris box. I'm quite happy with it. |
| 05:36.42 | [av]bani | fwiw the soekris boards are _small_. youre talking nano-itx, not mini-itx |
| 05:36.56 | Nugget | it's comforting to have such low power draw and no moving parts. |
| 05:37.10 | tehdely | i'm getting a soekris once this ancient PC finally craps out |
| 05:37.13 | [av]bani | Nugget: yet, gumstix is smaller, lower power, and faster to boot |
| 05:37.23 | tehdely | P1 166 running freebsd, has outlasted all of our newer machines with the exception of the macs |
| 05:37.38 | Nugget | gumstix is linux, though, right? |
| 05:37.43 | [av]bani | its anything you want |
| 05:37.46 | Nugget | cool |
| 05:38.06 | Nugget | can I get one with three ethernets? :) |
| 05:38.09 | [av]bani | yep |
| 05:38.15 | Nugget | rockin' |
| 05:38.19 | [av]bani | and cf |
| 05:38.23 | [av]bani | or sd |
| 05:38.35 | acehunky | :D |
| 05:41.35 | Nugget | the gumstix site seems very linux-centric. it's enough to deter me |
| 05:41.53 | Nugget | "with patches kernel, with patches userspace" is never something you want to see |
| 05:42.11 | Qwell | Nugget: get on the BSD boys :p |
| 05:43.45 | [av]bani | it does run asterisk though |
| 05:46.00 | *** join/#asterisk kc5cqm (n=kc5cqm_@cpe-68-206-116-214.stx.res.rr.com) |
| 05:46.08 | *** join/#asterisk shido6 (n=shido@d221-68-216.commercial.cgocable.net) |
| 05:46.57 | kc5cqm | hey is there googletalk sip support yet? I know they're contactable via the gizmo project, and that is sip based... |
| 05:47.11 | tainted- | how much is gumstix |
| 05:47.54 | Qwell | tainted-: about $100-150 |
| 05:50.34 | rob0 | I'm a Linux user, but Nugget has a good point about that. I tend not to trust projects that can't see beyond Linux. |
| 05:51.06 | kc5cqm | what do you mean? |
| 05:51.16 | kc5cqm | define trust? |
| 05:51.26 | kc5cqm | in terms of longevity, security, political stance? |
| 05:51.48 | kc5cqm | I don't see the use of a windows or mac nessus port for instance |
| 05:51.50 | Nugget | It's a reason to lack confidence in their longevity or perspective. |
| 05:51.58 | coppice | i think he means projects which aren't doing exactly what he want piss him off :-) |
| 05:52.43 | kc5cqm | so how do you feel about X.org? |
| 05:52.46 | kc5cqm | ;-) |
| 05:53.02 | kc5cqm | ok, seeing a bit beyond linux to the BSD's |
| 05:53.13 | Nugget | I'm happy to see some competition in the X11R6 space, since XFree86 has been stagnant for longer than most people have been aware of their existence. |
| 05:53.14 | rob0 | A lot of people come into Linux from Windows, and they don't seem to understand that there are other types of Unix. |
| 05:53.16 | kc5cqm | or scientific apps |
| 05:53.35 | Nugget | and X11R6 predates Linux by a few decades, so the heritage in that area sort of dodges the whole issue. |
| 05:53.57 | kc5cqm | hehe, X is certainly well rooted |
| 05:54.26 | kc5cqm | I'm just saying there there exist certain applications that only make sense on a *nix enviroment |
| 05:54.41 | Nugget | and I'm just saying that "Linux" has fuck-all to do with *nix. |
| 05:54.56 | Nugget | it's just one of many, and often isn't the one that makes the most sense |
| 05:55.13 | kc5cqm | ;-) |
| 05:55.51 | kc5cqm | actually Nugget, I'm debating on openBSD on this p III 933 box I just got...dedicated for * use |
| 05:56.07 | Nugget | for asterisk I can't really recommend anything but Linux. |
| 05:56.08 | *** join/#asterisk SibRphrek (n=SibRphre@user-12lccke.cable.mindspring.com) |
| 05:56.24 | rob0 | If you need zaptel, you need Linux. |
| 05:56.39 | Nugget | I run asterisk on Linux, OS X, and FreeBSD. It's enough of a challenge in Linux, trying to buck that expectation just compounds the difficulties |
| 05:56.41 | kc5cqm | yeah, I need zaptel for my packet8 |
| 05:57.05 | [av]bani | you can run packet8 with * ? |
| 05:57.13 | kc5cqm | I thought zaptel was supported under FreeBSD |
| 05:57.20 | Nugget | it is, but the support is half-assed |
| 05:57.36 | [av]bani | er, afaik they only support their locked devices |
| 05:57.36 | Nugget | it's flaky, it lags, and there's nobody who can help if you have problems. |
| 05:57.38 | kc5cqm | [av]bani, well, sorta...p8 device plugged into an analog card |
| 05:57.44 | [av]bani | my cow orkers have packet8 |
| 05:58.03 | De_Mon | cow orkers :P |
| 05:58.05 | [av]bani | the new stuff they ship can't be unlocked |
| 05:58.11 | [av]bani | uniden phones |
| 05:58.22 | coppice | that's why supporting many platforms is not necessarily a good thing. putting all your effort into supporting one can lead to much better results, and better long term viability |
| 05:58.27 | kc5cqm | give it time.. |
| 05:58.37 | [av]bani | if someone knows how to get packet8 working with * i'd love to hear it. |
| 05:58.45 | kc5cqm | I might consider a really stripped down linux for it though |
| 05:58.48 | Nugget | asterisk and zaptel need to be a hell of a lot more stable before cross-platform use will really be viable |
| 05:58.59 | [av]bani | Nugget: "sipX" |
| 05:59.17 | kc5cqm | [av]bani, it's working indirectly. I'm using the P8 device, but I have the analog line from the device plugged into a x101p card in my * box |
| 05:59.26 | [av]bani | kc5cqm: cheater! |
| 05:59.27 | tainted- | can a gumstix run m0n0wall? |
| 05:59.32 | Qwell | tainted-: probably |
| 05:59.33 | kc5cqm | with the echo-cancellation turned on, it's pretty clean |
| 05:59.34 | Nugget | I would agure, though, that having a focus on cross-platform use leads to better code, fewer bugs, and better performance. I think it's a shame that digium is linux-focused for that reason. |
| 05:59.37 | tainted- | how much load can it handle? |
| 05:59.50 | Qwell | tainted-: aren't they up to like 400mhz? |
| 05:59.50 | Nugget | it's the whole "root nameserver" concept, which I think is fundamnetally wise. |
| 05:59.51 | tainted- | 100,000 concurrent http hits okay? |
| 05:59.56 | kc5cqm | yeah, it's cheating... |
| 05:59.58 | kc5cqm | but it works |
| 05:59.58 | Qwell | I doubt that |
| 06:00.08 | tainted- | hmm |
| 06:00.10 | kc5cqm | is gumstix x86? |
| 06:00.14 | [av]bani | Nugget: stop whining and start porting? :) |
| 06:00.15 | tainted- | no |
| 06:00.23 | Nugget | I'm too stupid to help with that. |
| 06:00.25 | [av]bani | Nugget: afaik they dont refuse ports |
| 06:00.30 | *** join/#asterisk Mavvie (n=edwin@252-131-222-203.rev.techex.net.au) |
| 06:00.33 | Mavvie | greetings. |
| 06:00.47 | Mavvie | I had this great idea this afternoon: |
| 06:00.58 | [av]bani | Nugget: then file a funded development request, bankroll ports |
| 06:01.11 | [av]bani | "i'm too poor to help with that." |
| 06:01.23 | Nugget | No financial interest for me. I don't use asterisk professionally |
| 06:01.24 | tainted- | Qwell what would u recommend as a colocation firewall (linux based) |
| 06:01.30 | Qwell | got me.. |
| 06:01.42 | rob0 | coppice: still, as much as possible I think it's good for code to be portable across Unices. That's not like a shotgun approach of trying to support too much. |
| 06:01.46 | Mavvie | When a call comes in via a certain context, before doing all the includes of the different parts of the dialplan, I set a variable (like in the [global] section) so that later on in the dialplan I know exactly which context I came in through. |
| 06:01.50 | Nugget | I'm just a casual end-user when it comes to asterisk. |
| 06:01.58 | Nugget | and a blowhard, loudmouth, and mysql-hater. :) |
| 06:02.09 | tainted- | i can vouch for that |
| 06:02.12 | Mavvie | unfortunately, contexts don't like setting variables. |
| 06:02.20 | `Sauron | long live MYSQL! |
| 06:02.27 | Mavvie | hi `Sauron |
| 06:02.31 | coppice | rob0: depends. you generally have to rely on input from users, since you won't have many platforms to work with directly. |
| 06:02.37 | kc5cqm | If skype released a binary that interfaced with *, how many of y'all would run it? |
| 06:02.48 | many | no. |
| 06:02.55 | many | noway:) |
| 06:03.00 | Nugget | kc5cqm: I just bought a piece of hardware that I hope will provide a skype/asterisk gateway for me. |
| 06:03.00 | Mavvie | `Sauron: guess what. I got an "invitation to a mud wedding" from my old fatal dimensions mud. |
| 06:03.03 | kc5cqm | PostgreSQL > MySQL ;-) |
| 06:03.07 | Nugget | I expect to receive it next week |
| 06:03.08 | kc5cqm | hehe, actually I use both... |
| 06:03.10 | Mavvie | `Sauron: haven't been online there for say four years. |
| 06:03.17 | `Sauron | Haahn. |
| 06:03.18 | [av]bani | kc5cqm: sqlite > * |
| 06:03.23 | kc5cqm | Nugget, a hardware skype implimentation |
| 06:03.27 | Nugget | yeah |
| 06:03.34 | Nugget | like an ata, but for skype not pstn. |
| 06:03.37 | kc5cqm | [av]bani, perl hash on disk ;-) |
| 06:03.44 | Nugget | requires a windows box runnign skype to function |
| 06:03.49 | kc5cqm | or, need I say it....cobol |
| 06:03.50 | `Sauron | Eww. |
| 06:04.03 | Nugget | I'll add it to my asterisk pages once I've gotten it working |
| 06:04.04 | kc5cqm | oh, so it's a glorified USB soundcard? |
| 06:04.06 | `Sauron | Nugget: Isn't that like needing mysql to run a website? |
| 06:04.13 | [av]bani | i love how mythbusters makes people so angry |
| 06:04.17 | Nugget | kc5cqm: something like that, yeah, with a telco interface. |
| 06:04.23 | Nugget | it's a skype FXS |
| 06:04.31 | kc5cqm | If skype claims to have a wifi phone, I don't see why they don't make a hardware ethernet to pots device. |
| 06:04.42 | rob0 | All I was saying is that projects who seem to think that Linux is the only Unix are a turnoff for me. I like it if they're aware of the outside world. Whether or not they support it is another matter. |
| 06:04.49 | Nugget | that's what this is, basically, except it's usb and stupid. |
| 06:04.53 | `Sauron | grar |
| 06:05.07 | Nugget | http://www.echostore.com/skype-usb-to-rj11-adaptor.html |
| 06:05.11 | many | thats because skype doesnt want to share the market |
| 06:05.27 | Nugget | I figured that for $60 it was worth buying one just to play with |
| 06:05.37 | [av]bani | rob0: sounds like strawman to me. nobody thinks linux is the only unix, its just that not everyone has enough time to concentrate on different ports. |
| 06:05.40 | kc5cqm | skype wouldn't be sharing the market if they released a binary for * |
| 06:05.54 | kc5cqm | they'd be boosting their userbase |
| 06:06.01 | [av]bani | rob0: i write opengl stuff which runs on win32/linux/osx, but its a pita |
| 06:06.04 | many | but not their crapware. |
| 06:06.17 | `Sauron | so what would cause my FXO card to think it's off-hook for looong periods of time? |
| 06:06.46 | many | you wouldnt need to rely on skype software anymore |
| 06:06.46 | Nugget | kc5cqm: sure, but most of the time being cross-platform isn't more work -- it just requires perspective. |
| 06:06.48 | kc5cqm | hey, when someone calls from LD into my pbx and it answers and rings extensions, they get billed for the ringing huh? |
| 06:06.57 | `Sauron | yep |
| 06:07.00 | kc5cqm | or does it keep the voltage high (old school blackbox style)? |
| 06:07.02 | [av]bani | kc5cqm: dont answer, ring first |
| 06:07.14 | many | so they would boost their userbase, yes, but lose on other shares. |
| 06:07.23 | [av]bani | dial(exten&exten&exten) instead of answer() dial(exten&exten&exten) |
| 06:07.35 | kc5cqm | hmmm...thanks [av]bani |
| 06:07.58 | [av]bani | (...obvious? :) |
| 06:07.59 | kc5cqm | so it won't answer the incoming call unless an exten is answered (or later event fires() |
| 06:08.10 | kc5cqm | not that obvious... |
| 06:08.15 | [av]bani | well that, and it keeps the ringtone consistent |
| 06:08.30 | [av]bani | instead of (euro ring, then your local ringtone) |
| 06:08.39 | many | see, their not the first to implement easytouse voip |
| 06:08.44 | `Sauron | hum, so if you do a dial() first, and the othe end answers |
| 06:08.56 | `Sauron | does it automatically answer the incoming call, and connect them? |
| 06:08.59 | many | Teamspeak and stuff were there long before skype |
| 06:09.03 | rob0 | [av]bani: win32 is a different matter. I'm only going on about Linux-only stuff which you think is a strawman. Fair enough. |
| 06:09.04 | many | they just made the hype. |
| 06:09.13 | kc5cqm | hell, I had voip going 10 years ago |
| 06:09.18 | kc5cqm | in my dorm |
| 06:09.25 | many | Yea |
| 06:09.30 | *** join/#asterisk SwK (n=SwK@12-219-147-107.client.mchsi.com) |
| 06:09.32 | kc5cqm | and lets not forget speakfreely |
| 06:09.40 | rob0 | [av]bani: If I could think of an example and show you, I bet you'd agree with me. :) |
| 06:09.41 | kc5cqm | there's still not any decent voip crypto around |
| 06:09.51 | Nugget | pgpphone. :) |
| 06:09.59 | [av]bani | rob0: afaik nobody 'seem to think that Linux is the only Unix' and i know of nobody who is so insulated from the outside world that they are unaware of other unices, contrary to your belief... |
| 06:10.00 | many | so, if they were interested in interoperthingie (cant spell word right now.=), why didnt they implement other protocols as well? |
| 06:10.01 | kc5cqm | speakfreely had great crypto...crappy interface, 1/2 duplex, etc. |
| 06:10.15 | `Sauron | interoperatabillity |
| 06:10.24 | many | iax has some enc |
| 06:10.26 | many | sauro :) |
| 06:10.31 | `Sauron | interoperability? |
| 06:10.34 | `Sauron | hell if I know |
| 06:10.38 | many | yes, thanks. :) |
| 06:10.40 | *** join/#asterisk SplasPood (n=jwb@brooklyn.paravolve.net) |
| 06:10.48 | *** join/#asterisk nestar (i=nester@makes.all.the.girlies.go.wewt.wewt.net) |
| 06:10.56 | Nugget | [av]bani: I disagree. Too often I run into simple, braindead crap like #!/bin/bash and code that just makes dumb linux-only assumptions. |
| 06:11.03 | many | okay, gtg, sorry. :) |
| 06:11.04 | Nugget | there's no excuse for that kind of stuff |
| 06:11.07 | `Sauron | De_Mon wins |
| 06:11.07 | kc5cqm | everyone needs to start wrapping all their net traffic in crypto...totally need to monkeywrench the latest bullshit ideas the data-haul providers (ATT mostly) has in mind for a tiered internet. |
| 06:11.12 | many | civil service calls for me |
| 06:11.19 | [av]bani | Nugget: how about crap which makes dumb bsd-only assumptions? |
| 06:11.24 | [av]bani | Nugget: i see plenty of that. |
| 06:11.33 | Nugget | really? I can't say that I do. |
| 06:11.38 | De_Mon | Nugget whats wrong with #!/bin/bash ?? |
| 06:11.38 | `Sauron | Nugget: All of my shell scripts are bourne-compatible. :) |
| 06:11.39 | [av]bani | i see it all the time. |
| 06:11.46 | kc5cqm | the BSD and Linux camps have always had this relationship...long as I could remember. |
| 06:11.54 | Nugget | De_Mon: bash doesn't exist on most unix boxes, and when it does it's often not in /bin/ |
| 06:11.54 | `Sauron | #!/bin/sh |
| 06:11.57 | [av]bani | kc5cqm: linux = posix, bsd = "bsd" |
| 06:12.10 | deidre | did anyone manage to use intel 536EP as x100P? |
| 06:12.15 | [av]bani | sorta-posix when it suits them, bsd when it doesnt |
| 06:12.15 | De_Mon | Nugget oh... |
| 06:12.22 | kc5cqm | bsd lite |
| 06:12.42 | tainted- | what's the minimum # of digits in an international call |
| 06:12.42 | Mavvie | hah, found a reason why "extension => s,n" is bad.... |
| 06:12.47 | [av]bani | makes porting a pita when an api exists on one side but not the other, or when bsd says 'we dont need posix semantics, legacy is good neough for us' |
| 06:12.53 | Mavvie | (if yuo accidently remove a line and have no idea where it came from) |
| 06:12.57 | kc5cqm | I remember when microsoft claimed NT4 was posix |
| 06:12.59 | [av]bani | 'we know better than ISO' |
| 06:13.05 | Mavvie | "which line did I delete again?" |
| 06:13.08 | tainted- | i'm trying to catch bad #s before it goes out the trunk |
| 06:13.22 | De_Mon | Mavvie undo or diff |
| 06:13.30 | Mavvie | De_Mon: cvs diff to the rescue indeed. |
| 06:13.58 | De_Mon | Mavvie if your using vim you could diff against the backup |
| 06:14.12 | De_Mon | or.. any editor that makes backups |
| 06:14.47 | [av]bani | kc5cqm: it is, mostly. about as posix as HP/UX is. |
| 06:15.16 | kc5cqm | they also called it C3 |
| 06:15.29 | kc5cqm | (less any removable media or network) |
| 06:15.30 | [av]bani | still cracks me up when vendors ship k&r c compilers in 2006... |
| 06:16.39 | kc5cqm | its an important history lesson... |
| 06:16.59 | kc5cqm | sorta the way we all hav k&r books somewhere |
| 06:17.08 | [av]bani | Nugget: there is always platform-specific assumptions, even among *bsd. |
| 06:17.13 | *** join/#asterisk nestar_ (i=nester@makes.all.the.girlies.go.wewt.wewt.net) |
| 06:17.33 | Nugget | and thus draws the line between good code and bad code. |
| 06:17.34 | Mavvie | [av]bani: yes, like <linux/soundcard.h> |
| 06:18.22 | *** join/#asterisk mda (n=mda@adsl-71-141-123-169.dsl.snfc21.pacbell.net) |
| 06:18.23 | [av]bani | Nugget: what projects have you released? |
| 06:18.26 | Nugget | and no, not "always." that's ridiculous and unsupportable. |
| 06:18.52 | Nugget | there's no shortage of code that can "./configure && make install" on all variety of goofy platforms |
| 06:18.54 | [av]bani | well ok, 'hello world' will mostly compile across all bsds without changes |
| 06:19.11 | [av]bani | Nugget: err, why do you think autoconf is needed.... |
| 06:19.33 | [av]bani | if bsd was so consistent, configure wouldnt be needed to compile across all the bsds.. but it is |
| 06:19.45 | *** part/#asterisk deidre (i=uyiii@stevanus.centrin.net.id) |
| 06:20.04 | Nugget | there's also a non-zero amount of software that fails embarassingly to "./configure && make install" if you're not using Linux, often for no good reason at all beyond simple developer ignorance. |
| 06:20.08 | Nugget | and that's a valid complain |
| 06:20.10 | [av]bani | and tbh, configure is clunky and top heavy |
| 06:20.10 | Nugget | +t |
| 06:20.36 | [av]bani | well, what multi platform projects have you released? |
| 06:20.52 | Nugget | that's your counterargument? |
| 06:21.12 | [av]bani | if you think its so simple, i'd like to see some of your code |
| 06:21.26 | `Sauron | Nugget: the same can be said for *bsd software |
| 06:21.46 | [av]bani | (you obviously have no idea how much work goes into porting stuff across bsd's, let alone osx or win32 or linux) |
| 06:21.58 | De_Mon | i'd rather have something that works on bsd or linux than nothing because the developer didn't want to learn how to make it cross-compatable |
| 06:21.59 | Nugget | it's certainly less common for software to be unnecessarily bsd-specific, if for no other reason that linux dominates the open source world. |
| 06:22.19 | `Sauron | Nugget: actually, the statement works for any *nix :) |
| 06:22.24 | De_Mon | quit complaining, get of your ass, and fix it |
| 06:22.34 | [av]bani | so conversely, if bsd was dominant you would expect more unnecessarily bsd-specific code... |
| 06:22.39 | [av]bani | and this is illogical how? |
| 06:22.47 | Nugget | huh? |
| 06:22.48 | `Sauron | De_Mon: I've ported my share of software between platforms |
| 06:23.11 | [av]bani | there is more linux specific code because linux is dominant |
| 06:23.19 | SwK | you know its kinda funny how people actually think BSD is not very prevelent |
| 06:23.22 | `Sauron | svr4 code sucks |
| 06:23.24 | Nugget | isn't that exactly what I just said? |
| 06:23.24 | [av]bani | and this is a fault of linux how? |
| 06:23.37 | Nugget | when did i say anything was the fault of linux? |
| 06:23.51 | SwK | whats up nugget |
| 06:24.15 | Mavvie | http://images.google.cn/images?q=tiananmen vs http://images.google.com/images?q=tiananmen |
| 06:24.19 | Nugget | I said it bothered me when software was needlessly linux-specific, and you're trying to twist that into some bullshit os war that I've never started. |
| 06:24.22 | [av]bani | then your statement has no significance at all, it is simply stating the blindingly obvious |
| 06:24.34 | Nugget | you're arguing against all variety of things I never said. |
| 06:24.56 | Nugget | and then claiming victory because the things you *wish* I'd said are easy to refute. |
| 06:25.41 | cpm | straw man |
| 06:25.48 | SwK | I'm opening bets... Giving 5 to 3 on Nugget |
| 06:26.13 | rob0 | I was Nugget's backup man, but I stepped out of it. |
| 06:26.30 | SwK | I appearently walked in to late |
| 06:26.37 | mda | sorry to interrupt this autoconf discussion... can someone here help me understand how asterisk might be used to how a radio call-in show? callers need to be able to use normal phones to call an 800 number, say perhaps 6 callers at once. |
| 06:26.44 | [av]bani | ok, you said there's more linux-specific code because there's more linux. so this is insightful how exactly? |
| 06:26.47 | Nugget | frankly, it's pretty silly to argue against my only point, unless you think it's a good thing for software to be unnecessarily linux-specific. |
| 06:26.52 | rob0 | cat chips guacamole Budweiser >> /dev/rob0 |
| 06:27.14 | SwK | altho I do like watching battles of the whits (especially when one of the parties obviously has no clue the caliber of person he is speaking too) |
| 06:27.28 | Nugget | so now you're not disagreeing with me, you're just bitching that I haven't been sufficiently insightful? brilliant. |
| 06:27.41 | [av]bani | no, i'm saying you're whining about something which is pretty pointless. |
| 06:28.01 | SwK | you want whining?! Let me get started about something... |
| 06:28.02 | Nugget | except you've conveniently decided to be selective about what I'm saying. |
| 06:28.50 | SwK | so there's this chartered airplane and on board are Bill Clinton, A preist, and a boy scout..... |
| 06:29.05 | Nugget | haha |
| 06:29.06 | rob0 | and how many parachutes? |
| 06:29.10 | Qwell | rob0: 2 |
| 06:29.12 | Nugget | and one backpack. :) |
| 06:29.13 | Qwell | always n-1 |
| 06:29.15 | SwK | 3 parachutes |
| 06:29.45 | rob0 | It's okay Father, we both can go, the Leader of the Free World just jumped out with my backpack. |
| 06:29.51 | SwK | The pilot runs outta cockpit, bad news and worse news, the planes going down... we only have 3 parachutes... so you on the ground..... |
| 06:30.11 | Qwell | ruined ot |
| 06:30.15 | Qwell | it* |
| 06:30.20 | rob0 | /dev/spoiler |
| 06:30.23 | Qwell | SwK: You suck at this :p |
| 06:30.28 | SwK | the priest says I cant Die I have my flock to watch over.... |
| 06:31.03 | kc5cqm | hey, anyone here using gentoo? |
| 06:31.08 | Qwell | kc5cqm: yeah |
| 06:31.13 | rob0 | Let's find something else to fight about. |
| 06:31.15 | SwK | Clinton says well I'm a former president I cant die.. the priest responds "well waht about the boy" Clinton... "fuck this kid"... the Preist.. "We have time for that?" |
| 06:31.19 | kc5cqm | I've gotta get into it |
| 06:31.19 | argos73 | mda: fairly easy to do, but there are a bunch of pieces to "assemble" |
| 06:31.34 | SwK | kc5cqm, gentoo works just fine |
| 06:31.46 | Qwell | kc5cqm: there are TONS of docs for gentoo |
| 06:31.58 | kc5cqm | cool |
| 06:32.05 | kc5cqm | a coworker friend of mine likes it |
| 06:32.15 | Qwell | gentoo.org and the gentoo wiki |
| 06:32.16 | SwK | hentoos gotta good wiki that tells you how to do everything up to and including washing your ass |
| 06:32.24 | Qwell | SwK: indeed |
| 06:32.33 | tainted- | what version quicktime do i need to play gsm files? |
| 06:32.44 | Qwell | That's one thing about gentoo...it has amazing docs |
| 06:32.45 | mda | argos73: Telos makes a product called ONE-x-Six that does basically what we need. 6 PSTN lines in, does agc, can mute any of them, can call screen. However it is a bit expensive (list $1700) and still requires 6 PSTN lines in on a hunt group from the local phone company. |
| 06:32.55 | kc5cqm | ass washing is important too... |
| 06:33.01 | rob0 | SwK: could be important to do that if you're a Boy Scout flying with a priest and an ex-President. |
| 06:33.04 | Qwell | mda: $1600? Why not get a PRI? |
| 06:33.20 | [av]bani | presumably a pri is more expensve than 6 pots |
| 06:33.37 | tainted- | mda where are u located? |
| 06:33.39 | Qwell | I doubt a PRI is more than $1700 |
| 06:33.42 | tainted- | must be the boonies |
| 06:33.46 | [av]bani | Qwell: per month |
| 06:33.55 | mda | tained: i'm in San Francisco |
| 06:34.03 | tainted- | that's a bucket of ass |
| 06:34.05 | Qwell | is his not per month? |
| 06:34.15 | Qwell | mda: Is the $1700 a one time fee, or recurring? |
| 06:34.18 | [av]bani | 6 pots per month vs 1 pri+6 channels per month |
| 06:34.26 | argos73 | mda: as a low-end starting point, you could get a pair of TDM400 cards and plug the pots lines into them... that would give you two additional ports - one could be used as the interface to the mixer |
| 06:34.28 | mda | the $1700 is for the digital hybrid and console: http://www.telos-systems.com/?/1x6/default.htm |
| 06:34.31 | Qwell | oh |
| 06:34.34 | [av]bani | pri is likely more expensive per month, i doubt the one time equipment cost has anything to do with it |
| 06:34.41 | mda | the cost of PSTN lines coming vs. PRI is independent. |
| 06:34.52 | Qwell | well, sometimes 6 lines is enough to offset the cost |
| 06:34.55 | kc5cqm | look at the vonage ad on this page: http://blog.tmcnet.com/blog/tom-keating/voip/google-talk-uses-global-ip-sounds-voice-engine.asp |
| 06:34.59 | kc5cqm | this should not be legal |
| 06:35.43 | kc5cqm | someone's gonna get suid...err sued |
| 06:36.00 | mda | so anyhow, I'm guessing asterisk could deal with several PSTN lines. I assume the local phone company has to do the hunt? Verizon wants $37/month for each of 6 lines on a single phone number. |
| 06:36.13 | Qwell | mda: it could do it fine |
| 06:36.17 | argos73 | mda: no problem ther |
| 06:36.45 | [av]bani | kc5cqm: unlimited with lots of tiny print |
| 06:36.48 | mda | or alternatively, i'm guessing asterisk could be used with VOIP and all i need is broadband internet, and the PSTN hunt group is done by some VOIP provider? |
| 06:37.02 | kc5cqm | [av]bani, no...it's a link to a site for other providers...not vonage |
| 06:37.23 | kc5cqm | unless he's a reseller and has some sort of geographic thing going for his site |
| 06:37.24 | argos73 | mda: probably wouldn't go that route... audio quality could get icky |
| 06:37.45 | [av]bani | kc5cqm: haha, deceptive ad. but business as usual. and fully supported by your corrupt congressmen |
| 06:37.50 | mda | argos73: i would have guess audio quality would be better with VOIP? since there wouldn't be the last mile analog on my end. |
| 06:37.52 | *** join/#asterisk imran (n=a@cpe-68-206-61-183.houston.res.rr.com) |
| 06:38.14 | [av]bani | mda: the only negative is the latency, everything else is win |
| 06:38.41 | kc5cqm | "my congressman takes more bribes than yours" |
| 06:39.09 | SwK | mda: i have a few asterisk boxes switching 192 lines |
| 06:39.13 | [av]bani | mda: if you can find a good ITSP, thats the simplest and usually cheapest way. but good reliable ITSP are hard to come by |
| 06:39.38 | [av]bani | and yay finished my diskless CF * server |
| 06:41.10 | argos73 | mda: depends where you want to spend your money... you'd need a fairly good (low latency, low packet loss) IP connection to get good results |
| 06:41.21 | mda | i should clarify that *I'm* in SF, but the radio show is actually in Florida. I'm just the west coast geek helping out. |
| 06:41.37 | [av]bani | ask _Sam-- about florida ITSPs |
| 06:41.42 | [av]bani | he has one he likes |
| 06:42.13 | *** join/#asterisk imran (n=a@cpe-68-206-61-183.houston.res.rr.com) |
| 06:42.14 | [av]bani | or was it [TK]D-Fender |
| 06:42.16 | [av]bani | heh |
| 06:43.06 | SwK | hahahah |
| 06:43.08 | mda | verizon wants $37/month for line on a hunt group. I don't get it -- why would they charge so much for a trivial thing, when basic service is $13/month? |
| 06:43.15 | SwK | which florida ITSP? |
| 06:43.53 | SwK | mda: huntgroups are "business class service" basic service is "residential" and business tarifs are always higher |
| 06:44.15 | argos73 | mda: sure it's $13 total? lots of taxes and other charges in there... |
| 06:44.37 | SwK | you can get $10.50 lines in TN from bellsouth |
| 06:44.47 | SwK | (minus the obligitory E911 etc charges) |
| 06:44.56 | argos73 | i'm paying between $30-50 for verizon business lines, depending on where they are |
| 06:45.01 | mda | argos73: yeah, there are some extras, but still < $20. |
| 06:45.14 | Nugget | reminds me, I need to drop callerid from my pstn line. all I do with it now is fax. |
| 06:45.35 | SwK | Nugget, you like actually have a hard fax machine? |
| 06:45.39 | Nugget | yes |
| 06:45.40 | SwK | those things are so 1990 |
| 06:45.55 | Nugget | computer fax is great for receiving, but it still sucks for sending. |
| 06:45.58 | [av]bani | t38 and asterisk is not so good yet... |
| 06:46.05 | Qwell | ugh, in CA, home lines are ~$30 |
| 06:46.12 | SwK | t37/t28 just suck |
| 06:46.14 | Nugget | I have to fax my expensre reports, so having a real machine is the only sane solution I've found |
| 06:46.18 | Qwell | with just basic features |
| 06:46.19 | SwK | err t38 |
| 06:46.21 | Nugget | expense, even. |
| 06:46.22 | SwK | damn I cunt tipe |
| 06:46.41 | mda | so about software -- the Telos has a nice physical keyboard, computer software, etc. for a show assistant to do call screening, mute callers. |
| 06:46.46 | SwK | nugget: scanner with ADF |
| 06:46.50 | kc5cqm | Nugget, I've found hylafax great |
| 06:47.08 | Nugget | I tried the scanner approach for a bit, but it was so much more work |
| 06:47.12 | Mavvie | kc5cqm: here too. |
| 06:47.21 | tainted- | www.voipwanker.com still available! |
| 06:47.22 | SwK | Nugget, thats what the ADF is for |
| 06:47.28 | kc5cqm | got one of those rocketmodems...works great |
| 06:47.44 | Qwell | adf=auto document feeder |
| 06:47.57 | SwK | mda: you know you can get really nice PBX style phones like Polycoms and Cisco's for asterisk |
| 06:48.05 | kc5cqm | eww...sending real paper |
| 06:48.08 | SwK | ding sing ing qwell gets a gold star |
| 06:48.23 | kc5cqm | hylafax works great for sending from a doc imaging system |
| 06:48.30 | tainted- | anyone deployed asterisk in a mission critical environment? |
| 06:48.39 | [av]bani | define mission critical |
| 06:48.40 | SwK | tainted: like ITSPS? |
| 06:48.48 | SwK | or how about my whole office |
| 06:48.58 | kc5cqm | only deployed in my house |
| 06:49.08 | tainted- | like no calls can be dropped |
| 06:49.10 | argos73 | mda: it would be a little work, but you should be able to come up with a dialplan to handle part of it, and I imagine there are some GUI programs out there that could be adapted to fit |
| 06:49.26 | SwK | tainted-: like 6 9's uptime heh |
| 06:49.30 | kc5cqm | what is ITSPS? |
| 06:49.40 | SwK | ITSPs |
| 06:49.42 | Qwell | SwK: 9 6's? |
| 06:49.44 | tainted- | SwK like PSTN uptime |
| 06:49.46 | SwK | 99.9999 |
| 06:49.52 | Nugget | I use asterisk for work, but it's nothing like running a 911 call center. |
| 06:49.54 | Qwell | 66.6666666% |
| 06:50.03 | SwK | 666.666 |
| 06:50.07 | SwK | 666.666.666 |
| 06:50.09 | mda | these folks are apparently using asterisk for a call-in show: http://lists.digium.com/pipermail/asterisk-users/2005-June/113113.html |
| 06:50.18 | *** join/#asterisk brc_ (n=brian@pdpc/supporter/basic/brc) |
| 06:50.19 | kc5cqm | My cable modem gives me about a 90% uptime |
| 06:50.20 | kc5cqm | hehe |
| 06:50.25 | [av]bani | heh. the ILECs here have constant massive outages. prolly not even 4 9's |
| 06:50.25 | Nugget | if I get a call and the quality sucks I just blame it on a recent office move and call them with my mobile. :) |
| 06:50.44 | mda | but i can't say i understand what their system diagram looks like. what services are they getting from the outside? how is the hunt group done? |
| 06:50.44 | SwK | I work for an asterisk support/dev company and we have put asterisk in all kinds of places |
| 06:51.08 | brc_ | when you do a sip show peers, under the Nat column, what does "N" indicate? |
| 06:51.25 | SwK | brc_, "Not a damn thing" |
| 06:51.28 | brc_ | it seems to match to the peers I have nat=yes on, but wouldn't Y make more sense |
| 06:51.34 | brc_ | SwK |
| 06:51.39 | brc_ | DUDE |
| 06:51.43 | SwK | whats up y0 |
| 06:51.43 | brc_ | long time |
| 06:51.43 | tainted- | hmm |
| 06:51.58 | brc_ | nat is a mofobeotch |
| 06:52.00 | argos73 | with that many callers, they're probably using PRIs... hunt groups kinda fall out of the picture at that point - it's just a matter of how many channels you have |
| 06:52.11 | tainted- | SwK what's the most 'mission critical' environment u've done |
| 06:52.20 | tainted- | SwK that was all VOIP |
| 06:52.20 | Qwell | I run my pacemaker on * |
| 06:52.27 | Nugget | haha |
| 06:52.36 | SwK | tainted: how about several VoIP only carriers |
| 06:53.11 | argos73 | Qwell: you reboot your pacemaker weekly? |
| 06:53.14 | SwK | tainted: total combined monthly minutes in the 1/4 to 1/2billion monthly range |
| 06:53.32 | SwK | damn that was redundant redundant |
| 06:53.43 | argos73 | crc check |
| 06:53.46 | brc_ | department of redundancy |
| 06:53.46 | tainted- | SwK all on asterisk? |
| 06:53.47 | brc_ | department |
| 06:53.51 | SwK | no |
| 06:53.54 | tainted- | SwK or asterisk / SER |
| 06:53.59 | SwK | ast/ser |
| 06:54.26 | tainted- | nice |
| 06:54.37 | tainted- | just wanted to know it was possible |
| 06:54.49 | [av]bani | anything is possible if you throw enough $ at it |
| 06:55.26 | tainted- | that's deep |
| 06:55.49 | [av]bani | well, it got us to the moon didnt it? |
| 06:56.19 | Supaplex | so where's Elvis? |
| 06:56.25 | rob0 | Hey, I didn't get to go to the moon. :( |
| 06:56.27 | Nugget | he's left the building. |
| 06:56.32 | argos73 | we never got to the moon.. that was all done on a sound stage... :) |
| 06:56.40 | *** part/#asterisk kab0b (n=asdf@S0106001195772f19.ed.shawcable.net) |
| 06:57.00 | mda | why should i care about physical location of an ITSP? people are asking about florida, etc.? |
| 06:57.07 | Supaplex | who needs $$ when you can use your imagination |
| 06:57.16 | Qwell | mda: the closer they are to you, the less latency (generally) |
| 06:57.35 | mda | ah. |
| 06:58.21 | argos73 | mda: but it's worth researching first.... a traceroute from my cable modem to my dsl line (same location) usually runs through NYC and Chicago |
| 06:58.27 | argos73 | ...to go three feet |
| 06:58.28 | mda | but isn't the speed of light about the same on the traditional phone network and internet? |
| 06:58.41 | argos73 | mda: far from it |
| 06:58.59 | mda | i mean, i realize the phone network is synchronous. |
| 06:59.07 | argos73 | every router between point A and B adds a little delay |
| 06:59.21 | mda | but at least with high quality ISPs, i tend to see latencies cross-country < 70ms consistently. |
| 06:59.45 | SwK | yeah but a 1 hop ITSP can still be 10^1000 times worse then a 50 hop away ITSP |
| 06:59.59 | Nugget | route through new orleans and your packets will get drunk. |
| 07:00.14 | Supaplex | heh |
| 07:00.26 | Supaplex | no, they drown |
| 07:01.08 | SwK | or they get blown away by the tornado |
| 07:01.40 | Supaplex | hurricane > tornado |
| 07:03.13 | tainted- | i used to get 9ms to broadvoice's servers |
| 07:03.22 | tainted- | still sounded like crap |
| 07:04.04 | *** join/#asterisk jissssssssss (n=dsa@222.124.227.92) |
| 07:04.07 | rob0 | You should have talked to someone else :) |
| 07:05.29 | *** part/#asterisk kc5cqm (n=kc5cqm_@cpe-68-206-116-214.stx.res.rr.com) |
| 07:08.01 | argos73 | eewwww... got 100 new DID numbers today - just realized that I need to type all of them into this spreadsheet... |
| 07:08.51 | Mavvie | argos73: be happy, last time I let somebody else do it I got to correct it all up to two times. |
| 07:09.02 | argos73 | hehe |
| 07:09.12 | SwK | argos73: yeah well I wont mention any company names, but try one of the largest VoIP did/minute resellers in the country does everything with excel spread sheets |
| 07:09.15 | argos73 | that's why I maintain the spreadsheet... :) |
| 07:10.11 | jissssssssss | hi... |
| 07:15.29 | *** join/#asterisk bloch (n=lol@c-67-170-7-94.hsd1.wa.comcast.net) |
| 07:17.46 | *** join/#asterisk N0S3 (n=cristian@host145.200-43-204.telecom.net.ar) |
| 07:20.09 | N0S3 | <PROTECTED> |
| 07:20.24 | N0S3 | <PROTECTED> |
| 07:23.35 | *** join/#asterisk MGSsancho (n=user@adsl-67-121-107-88.dsl.irvnca.pacbell.net) |
| 07:24.39 | *** join/#asterisk cuff (i=cuff@p121.bass6.sinor.ru) |
| 07:27.33 | *** part/#asterisk cuff (i=cuff@p121.bass6.sinor.ru) |
| 07:34.40 | *** join/#asterisk _cleric_ (n=dacleric@p5482B5BA.dip0.t-ipconnect.de) |
| 07:35.34 | *** join/#asterisk Astar (n=astar@ANantes-154-1-13-92.w81-53.abo.wanadoo.fr) |
| 07:42.46 | *** join/#asterisk newsmafia (n=newsmafi@wsip-68-15-19-142.sd.sd.cox.net) |
| 07:42.48 | *** join/#asterisk angom_h (n=angom@red-corp-200.76.252.151.telnor.net) |
| 07:46.52 | *** join/#asterisk scardinal (n=supreme@port816.ds1-suoe.adsl.cybercity.dk) |
| 07:48.13 | *** part/#asterisk jaike (n=a@203.131.137.76) |
| 07:57.15 | *** join/#asterisk bluecrow76 (n=Mitch@ip24-250-77-177.br.br.cox.net) |
| 08:06.38 | Beirdo | anybody here using broadvoice? |
| 08:11.01 | *** join/#asterisk acehunky (n=chat_jok@59.184.4.145) |
| 08:11.17 | acehunky | hi |
| 08:14.39 | *** join/#asterisk axscode (n=axscode@203.213.217.123) |
| 08:15.14 | axscode | Feb 6 04:03:45 WARNING[5634]: chan_sip.c:9532 handle_response_invite: Forbidden - wrong password on authentication for INVITE to '"7770001" <sip:8888062@192.168.4.10>;tag=as3390bbb0' <-- hi guyz.. who's password is wrong... user 8888062 or 7770001? |
| 08:17.51 | *** join/#asterisk ard (n=ard@2001:7b8:32d:0:20c:6eff:fe18:d11f) |
| 08:19.12 | iDunno | well, where did you change it? it's wrong on the other one :) |
| 08:19.43 | axscode | don't know. im trying to create an outgoing trunk.. |
| 08:19.53 | axscode | but it seems... I have that error.. |
| 08:20.14 | axscode | sip outgoing trunk.. |
| 08:20.38 | iDunno | I'm guess then that you've got the wrong password on the outgoing trunk |
| 08:21.03 | axscode | the outgoing trunk have a correct user and pass. |
| 08:21.19 | *** join/#asterisk jalsot (n=tamas@abacus.eworldcom.hu) |
| 08:21.22 | axscode | because it has the same user and pass. |
| 08:22.16 | axscode | iDunno: do you know how to create outgoing trunk manually? coz I tried using astbill for that.. |
| 08:22.54 | *** join/#asterisk TonyM (n=TonyM@adsl-solo-80-168-225-194.claranet.co.uk) |
| 08:23.10 | tronix | try 'reload' command in Asterisk's console |
| 08:23.12 | *** join/#asterisk nestar (i=nester@makes.all.the.girlies.go.wewt.wewt.net) |
| 08:23.13 | tronix | then try again |
| 08:23.51 | tronix | it could also be an auth type problem? |
| 08:24.01 | tronix | eg set 'auth=plain' or 'auth=md5' to resolve |
| 08:25.42 | iDunno | it's only a SIP peer, if it's sip, so you only need to look in the asterisk book at the sip.conf examples :) |
| 08:26.53 | axscode | I gues its not on auth.. since I can register may phones... though not in the trunk.. |
| 08:26.56 | axscode | brb.. |
| 08:32.54 | *** join/#asterisk Uberbot (n=Uberbot@c-69-252-219-76.hsd1.nm.comcast.net) |
| 08:32.59 | Uberbot | Hi all. |
| 08:33.58 | Uberbot | Can anyone tell me why this doesn't work? |
| 08:34.04 | Uberbot | exten => 715,4,record(/tmp/asterisk.wav) |
| 08:34.04 | Uberbot | exten => 715,5,wait(2) |
| 08:34.05 | Uberbot | exten => 715,6,playback(/tmp/asterisk.wav) |
| 08:34.38 | *** part/#asterisk newsmafia (n=newsmafi@wsip-68-15-19-142.sd.sd.cox.net) |
| 08:35.38 | Uberbot | All I get is: Feb 4 01:32:07 WARNING[1887]: file.c:820 ast_streamfile: Unable to open /tmp/asterisk.wav (format ulaw): No such file or directory |
| 08:35.38 | Uberbot | But the file does exist.... |
| 08:39.02 | Beirdo | anyone here use sixtel or broadvoice? |
| 08:39.41 | *** join/#asterisk sulex (n=sulex@pdpc/supporter/active/sulex) |
| 08:42.13 | *** join/#asterisk pengyong (n=lala@218.93.119.110) |
| 08:45.06 | *** join/#asterisk oej (n=oej@apollo.webway.se) |
| 08:45.19 | *** part/#asterisk Uberbot (n=Uberbot@c-69-252-219-76.hsd1.nm.comcast.net) |
| 08:47.04 | *** join/#asterisk bloch (n=lol@c-67-170-7-94.hsd1.or.comcast.net) |
| 08:55.18 | *** join/#asterisk [Airwolf] (n=airwolf@attilla.nl) |
| 09:08.48 | *** join/#asterisk af_ (n=af@ip-142-84.sn1.eutelia.it) |
| 09:16.15 | *** join/#asterisk brookshire[home] (n=matt@68.62.235.16) |
| 09:30.47 | *** join/#asterisk ard (n=ard@2001:7b8:32d:0:20c:6eff:fe18:d11f) |
| 09:41.30 | sim | hop |
| 09:41.38 | brookshire[home] | jump? |
| 09:53.52 | *** join/#asterisk Simon- (n=byte@ecares35.ulb.ac.be) |
| 09:57.39 | *** join/#asterisk h4mm3r` (n=h4mm3r@85-18-14-10.fastres.net) |
| 10:05.43 | *** part/#asterisk droops (n=droops@adsl-065-005-212-128.sip.jan.bellsouth.net) |
| 10:17.02 | *** join/#asterisk pa (n=Paolo@unaffiliated/pa) |
| 10:17.46 | thazza | skip |
| 10:20.03 | *** join/#asterisk oej (n=oej@apollo.webway.se) |
| 10:38.56 | *** join/#asterisk Shoragan (n=shoragan@d072.apm.etc.tu-bs.de) |
| 10:41.26 | *** join/#asterisk RoyK (n=roy@10.80-203-106.nextgentel.com) |
| 10:45.44 | *** join/#asterisk Koshatul (n=evangeli@210-9-153-195.msi.net.au) |
| 10:46.50 | *** join/#asterisk J4nus (i=jqt6lv1y@cable-62-205-100-250.upc.chello.be) |
| 10:52.22 | *** join/#asterisk CleanerX (n=nix@xdsl-81-173-170-53.netcologne.de) |
| 10:53.57 | *** join/#asterisk wodantj (n=wodantj@c-1a9e72d5.05-32-6e6b701.cust.bredbandsbolaget.se) |
| 10:56.17 | wodantj | Hi. I'm little bit lost here. I've just installed Asterisk 1.0.7 (debian package) and I've configured my SIP to the extent that I can call my phonenummer from a normal phone and get "You have successfully...asterisk...". The problem is.. what now ? I want to have two soft phones connected to it, thats the general idea, BUT i dont know even where to start configurate stuff :/ |
| 10:59.25 | konfuzed | then you did nt read any of the simplest docs really, sip.conf and extensions.conf |
| 10:59.54 | wodantj | konfuzed: Where do I find them ? it's a huge project. i get confused |
| 11:00.49 | *** join/#asterisk ToTo (n=ToTo@host10-211.pool872.interbusiness.it) |
| 11:01.32 | konfuzed | your install dir/conf/sip.conf , extensions.conf |
| 11:03.29 | wodantj | the sip.conf seems to be OK since it do connect to my provider and I can call my phone number and get that "you have successfully installed and exexcuted asterisk". What I'm asking is where do I get good info about everything. The terminology of everything and so on. I don't know what to look for in most cases |
| 11:03.58 | konfuzed | voip-info.org |
| 11:04.28 | konfuzed | asterisk doesnt make any of the phones though |
| 11:04.52 | iDunno | or look at the asterisk book, it's for a slightly newer version of asterisk, but it mostly works :) |
| 11:05.50 | wodantj | konfuzed: doesnt make any of the phones? what do you mean by that ? |
| 11:06.04 | *** join/#asterisk saftsack (n=saftsack@p54A7FFDC.dip.t-dialin.net) |
| 11:06.10 | saftsack | hi are some isdn hardware cracks here? |
| 11:06.40 | *** join/#asterisk coppice (n=chatzill@35.202.17.210.dyn.pacific.net.hk) |
| 11:06.48 | konfuzed | asterisk is a software only project |
| 11:07.16 | saftsack | but isdn + asterisk is very common here in germany |
| 11:07.36 | wodantj | konfuzed: Oh thats OK. I'm having soft phones with it |
| 11:08.29 | saftsack | haha |
| 11:11.59 | blackremedy | anyone here heard of axon? |
| 11:12.12 | blackremedy | or used axon? |
| 11:15.09 | konfuzed | hm yeah digiums hardware is may as well be entirely seperate incontext of asterisk working with essentially all standard telecom interconnects ( ports,outlets,extensions,ip network ) ) |
| 11:34.12 | af_ | my spa 3000 does not detect remote hangup on fxo? what could be? |
| 11:40.03 | *** join/#asterisk gvag11 (n=g@ppp17-adsl-168.ath.forthnet.gr) |
| 11:40.21 | gvag11 | hi all |
| 11:41.34 | gvag11 | I have a problem with Spandsp ... I can receive fine but sending is a problem ... I can send always fine to a Panasonic machine but Canon and some others is always a disconnect. I am using TE110P . Any idea ? |
| 11:44.07 | gvag11 | coppice : I have a problem with Spandsp ... I can receive fine but sending is a problem ... I can send always fine to a Panasonic machine but Canon and some others is always a disconnect. I am using TE110P . Any idea ? |
| 11:46.47 | *** join/#asterisk leopardus (n=leopardu@217.22.179.197) |
| 11:47.11 | leopardus | hello : where can I get a list of all the applications? |
| 11:47.57 | gvag11 | show applications from the CLI> |
| 11:48.16 | *** join/#asterisk Jun_ (n=wj1918@pool-138-89-62-149.nwrk.east.verizon.net) |
| 11:48.45 | leopardus | gvag11 : ok, 10x |
| 11:48.53 | coppice | gvag11: strange. spandsp used to have a problem sending to specific machines in that way, but I thought it was sorted out long ago |
| 11:49.44 | gvag11 | coppice : whatever i do to the Panasonic is super fine ... But to others i have problem ... any idea ? I am using 0.0.2pre23 |
| 11:52.45 | coppice | if they just disconnect on you, it sounds like they are not happy with something in the messages. i wonder what? |
| 11:53.06 | leopardus | gvag11 : where can I get help on the applications? |
| 11:53.19 | gvag11 | for sure i pass the negotiation and then when i have Receiving page 1 , then disconnect... |
| 11:53.44 | gvag11 | leopardus: check on www.voip-info.org |
| 11:54.15 | coppice | that sounds like a training failure on the image modem carrier. |
| 11:54.32 | leopardus | gvag11 : ok |
| 11:55.24 | gvag11 | you think its because of the ghostscript that i use to convert pdf to tif ? |
| 11:55.27 | *** join/#asterisk Simon- (n=byte@ecares35.ulb.ac.be) |
| 11:55.30 | gvag11 | i am using tiffg3 |
| 11:56.27 | coppice | if that is wrong, why would the panasonic machine accept the image? |
| 11:56.46 | coppice | you need an image 1728 pixels wide |
| 11:57.26 | gvag11 | you are right .... yes its 1728 wide ... Some times i can send to Canon but its like 5% of the times ... |
| 11:58.17 | gvag11 | if its the training failure on the image modem carrier, what can i do for it ? |
| 12:01.52 | *** join/#asterisk Simon-_ (n=byte@80.193.211.68) |
| 12:08.11 | blackremedy | does anyone know if asterisk@home 2.5 will work with ndiswrapper? The kernel in 2.4 didn't like it. |
| 12:08.34 | blackremedy | sorry I meant 2.3 |
| 12:11.53 | RoyK | hi |
| 12:15.01 | *** join/#asterisk littleball (n=littleba@cm140.epsilon174.maxonline.com.sg) |
| 12:24.37 | littleball | hi |
| 12:28.13 | *** join/#asterisk coppice_ (n=chatzill@194.157.17.210.dyn.pacific.net.hk) |
| 12:29.23 | *** part/#asterisk RoyK (n=roy@10.80-203-106.nextgentel.com) |
| 12:46.29 | *** join/#asterisk Krill (n=majestic@210-84-11-13.dyn.iinet.net.au) |
| 12:48.06 | *** join/#asterisk tcheturbo (n=Lbjunior@bombacha.tcheturbo.com.br) |
| 12:48.44 | tcheturbo | i have this problem in the nat asterisk |
| 12:51.57 | *** join/#asterisk scon (n=scon@dslb-084-057-020-023.pools.arcor-ip.net) |
| 12:58.55 | *** join/#asterisk coppice_ (n=chatzill@9.203.17.210.dyn.pacific.net.hk) |
| 13:02.18 | *** join/#asterisk M-I-A-- (n=mai@wsp05975102wss.cr.net.cable.rogers.com) |
| 13:08.14 | *** join/#asterisk Dibbler_ (n=Dibbler@snaddy.plus.com) |
| 13:13.02 | *** join/#asterisk draga (i=draga@host209-235.pool8253.interbusiness.it) |
| 13:13.58 | *** join/#asterisk zotz (n=zotz@24.231.47.175) |
| 13:14.53 | draga | hello everybody. I've set up a asterisk server which receives and places calls using both local network and remote SIP connections. I've two remote phones and some remote SIP services. The question is: I'm trying to tweak the QoS settings and I'm getting some interesting results, but which ports should get more priorities (i.e.: which ports are used by Asterisk for the calls, etc)? |
| 13:15.34 | *** join/#asterisk pengyong (n=lala@218.93.157.7) |
| 13:34.11 | *** join/#asterisk pa (n=Paolo@unaffiliated/pa) |
| 13:37.38 | *** join/#asterisk leopardus (n=leopardu@217.22.179.197) |
| 13:51.35 | *** join/#asterisk scon (n=scon@dslb-084-057-043-079.pools.arcor-ip.net) |
| 13:52.42 | wodantj | Hi, i'm at a lost again. Got internal phones working and the "real" phoneline working to call TO but not call FROM. How do I get asterisk to use my SIP-connection to my phone provider to call "outside" calls ? |
| 13:52.52 | *** join/#asterisk coppice_ (n=chatzill@112.203.17.210.dyn.pacific.net.hk) |
| 13:52.58 | austinnichols101 | draga: check sip.conf and rtp.conf for ports |
| 13:53.44 | wodantj | clients-wants-to-phone-out -> asterisk -> phone out ... hmmt |
| 13:54.08 | austinnichols101 | wodantj: does real = PSTN? |
| 13:55.45 | wodantj | austinnichols101: I thinks thats the one |
| 13:55.52 | austinnichols101 | k |
| 13:55.58 | wodantj | yes it is.. |
| 13:58.34 | austinnichols101 | then set yourself up an exten => _9. that does a dial() command (so you hit 9 for this particular 'trunk') |
| 14:00.36 | *** join/#asterisk elg (n=fugalh@falcon.fugal.net) |
| 14:01.28 | wodantj | austinnichols101: Haven't figured out what those trunks are :) |
| 14:01.33 | *** join/#asterisk santiago (n=santiago@63.245.86.215) |
| 14:02.20 | austinnichols101 | think of a trunk as as being the same as the plain old copper line you have (or used to have) at home |
| 14:02.29 | *** join/#asterisk [Airwolf] (n=airwolf@attilla.nl) |
| 14:02.49 | *** part/#asterisk santiago (n=santiago@63.245.86.215) |
| 14:02.51 | wodantj | austinnichols101: so i set it up as TRUNK=SIP/user:pass@myprovider ? |
| 14:02.51 | austinnichols101 | then just say 'trunk' so that your down with the telecom guys |
| 14:03.08 | austinnichols101 | who's provider? |
| 14:03.15 | wodantj | i have a SIP provider |
| 14:03.20 | wodantj | for outgoing calls |
| 14:03.20 | austinnichols101 | which company? |
| 14:03.26 | austinnichols101 | each one's a bit different in setup |
| 14:03.30 | wodantj | "ephone" a company here in sweden |
| 14:03.34 | austinnichols101 | k |
| 14:03.39 | wodantj | well i got the incoming calls working |
| 14:04.14 | austinnichols101 | brb |
| 14:05.40 | *** join/#asterisk bmg505 (n=leon@dsl-146-1-238.telkomadsl.co.za) |
| 14:05.50 | *** join/#asterisk kn0x (n=atlantic@c-67-165-163-75.hsd1.il.comcast.net) |
| 14:08.49 | *** join/#asterisk scon (n=scon@dslb-084-057-030-233.pools.arcor-ip.net) |
| 14:09.16 | *** join/#asterisk pigpen2 (n=mark@fw.seamans.cc) |
| 14:11.58 | *** join/#asterisk coppice_ (n=chatzill@244.168.17.210.dyn.pacific.net.hk) |
| 14:11.59 | *** join/#asterisk Naturalblue (n=Kay@195.26.12.229) |
| 14:13.43 | *** join/#asterisk gambolputty (n=gambolpu@cblmdm72-240-116-131.buckeyecom.net) |
| 14:16.26 | *** join/#asterisk [TK]D-Fender (n=joe@66.11.164.239) |
| 14:29.39 | `lyme | u know when you like run zap show channel 2 |
| 14:29.57 | `lyme | and it says hookstate: on hook and you know it's unplugged... uhh what should you do? |
| 14:30.24 | *** join/#asterisk fulgas (n=fulgas@a81-84-117-84.cpe.netcabo.pt) |
| 14:30.26 | `lyme | it also says channel 1 is offhook, and i know it is on hook |
| 14:32.47 | *** join/#asterisk pigpen2 (n=mark@fw.seamans.cc) |
| 14:33.15 | nibbler_ | wohoo. asterisk actually performs very very well even on a pentium 200. handling multiple calls ;) |
| 14:33.32 | saw | guys, one of you has experience with SNOM and DevState() for setting LED status? |
| 14:35.34 | *** join/#asterisk rpm (n=russell@S010600111155e117.cg.shawcable.net) |
| 14:35.47 | p0g0_ | what's "zap show status" ALARMS RED mean? |
| 14:37.15 | austinnichols101 | red = trunk down |
| 14:37.42 | p0g0_ | austinnichols101: like a bad card? |
| 14:37.50 | austinnichols101 | not necessarily |
| 14:38.01 | wasim | usually a bad cable or beyond |
| 14:38.01 | austinnichols101 | more like if I unplug my phone line I'll have a red alarm |
| 14:38.17 | p0g0_ | austinnichols101: cool- that's the case then. thx |
| 14:38.19 | austinnichols101 | you can run zttool from /usr/src/zaptel to see more info |
| 14:43.30 | *** join/#asterisk wunderkin (i=kev@ip68-226-113-228.ph.ph.cox.net) |
| 14:44.53 | *** join/#asterisk razu (n=razu@217-159-187-162-dsl.prn.estpak.ee) |
| 14:55.06 | *** join/#asterisk pigpen2 (n=mark@fw.seamans.cc) |
| 14:55.50 | *** join/#asterisk ivanfm_ (n=ivanfm@200-207-60-132.dsl.telesp.net.br) |
| 14:58.28 | *** join/#asterisk kyo (n=kio@ool-4577ae5e.dyn.optonline.net) |
| 14:58.34 | *** join/#asterisk brainstorm (n=brainsto@nopcode.org) |
| 15:02.32 | *** join/#asterisk neon_kl (i=neon_kl@60.48.197.79) |
| 15:02.47 | *** join/#asterisk neon_kl (i=neon_kl@60.48.197.79) |
| 15:10.11 | *** join/#asterisk donnib (n=aaa@0x555281d0.adsl.cybercity.dk) |
| 15:10.39 | donnib | does anybody know a chat room for Asterisk@Home ? |
| 15:12.01 | wunderkin | ~aah |
| 15:12.05 | jbot | [aah] Asterisk@Home. The Asterisk@Home support forum is here: http://sourceforge.net/forum/forum.php?forum_id=420324 |
| 15:12.35 | donnib | so there is no chat room ? |
| 15:13.03 | wunderkin | forgot the name |
| 15:14.27 | *** join/#asterisk mhnoyes (n=mhnoyes@user-2ivfmtl.dialup.mindspring.com) |
| 15:15.57 | austinnichols101 | no chat for AAH |
| 15:16.21 | austinnichols101 | this is probably the best spot |
| 15:16.21 | wunderkin | im thinking of ampportal |
| 15:16.24 | *** join/#asterisk p0g0_ (n=pogo@madwifi/support/p0g0) |
| 15:16.40 | austinnichols101 | good idea |
| 15:16.47 | wunderkin | #amportal |
| 15:17.49 | *** part/#asterisk mhnoyes (n=mhnoyes@user-2ivfmtl.dialup.mindspring.com) |
| 15:17.54 | wunderkin | no one here will answer an asterisk@home question if it is related to the management of it, maybe something more directly related to asterisk but dont hold your breath |
| 15:17.58 | *** join/#asterisk p0g0 (n=p0g0@madwifi/support/p0g0) |
| 15:18.39 | wunderkin | and i hear amportal is dead a lot so good luck if you want a gui |
| 15:19.41 | *** join/#asterisk bkw__ (n=bkw_@ppp-70-128-122-10.dsl.tulsok.swbell.net) |
| 15:20.56 | austinnichols101 | I get a lot of answers for my aah-related questions here. You just have to make sure you've done your research before asking... |
| 15:27.54 | donnib | well i don't know if i choose correct to use AAH but right now it works with some issues which i can't figure out. it's slow when i dial in. it takes 9 seconds before the call tries to ring. have tried to look in the AAH forum and AMP forum and i am not the only one. it's something with dialparties.agi which takes time to process. i have disabled fax support which gave cople of seconds. |
| 15:29.58 | austinnichols101 | donnieb: sounds like something is bad wrong with config (hardware?). No issues at all of that sort here. |
| 15:29.58 | *** join/#asterisk Tili (i=Tili@202-133-67-96-dialup.sat.net.pk) |
| 15:30.20 | wunderkin | you are using an analog card i assume |
| 15:30.28 | donnib | no. i only use SIP |
| 15:30.46 | wunderkin | oh, thats a dialplan issue then |
| 15:31.15 | austinnichols101 | or it could be a centos / hw issue |
| 15:32.19 | donnib | well i don't know. what i know is what i can see in the CLI. it hangs many seconds in dialparties.agi before continuiing |
| 15:32.36 | wunderkin | exactly |
| 15:32.41 | *** join/#asterisk HamYaI (i=HamYai@125.24.0.233) |
| 15:32.42 | austinnichols101 | any mods to the dialplan other than through AMP? |
| 15:32.58 | donnib | no. only thrug AMP |
| 15:33.17 | austinnichols101 | what do you get when you run zttest? |
| 15:33.31 | HamYaI | what's latest stable version of asterisk on FC3? can anyone suggest? |
| 15:34.00 | austinnichols101 | donnie: /usr/zrc/zaptel/zttest |
| 15:34.28 | donnib | here is what i get in my CLI http://pastebin.com/pastebin.php?dl=538576 |
| 15:35.03 | wunderkin | like donnib said, it is a problem with the dialparties agi, zttest has nothing to do with this issue |
| 15:35.26 | austinnichols101 | k - I'll defer to wunderkin on this one |
| 15:35.30 | *** join/#asterisk killer-ch (n=killer-c@quasimodo.csn.tu-chemnitz.de) |
| 15:35.35 | wunderkin | agi for everything = lame |
| 15:35.51 | *** join/#asterisk BlueDevi1 (n=BlueDevi@scooby.csn.tu-chemnitz.de) |
| 15:36.02 | wunderkin | i cant help you since i dont use aah |
| 15:36.48 | donnib | it was just a question. i thought maybe somebody had an idea. |
| 15:36.50 | wunderkin | the agi needs to be debugged to see where it is holding up |
| 15:37.05 | donnib | any idea how i can do that ? |
| 15:38.11 | *** join/#asterisk elg (n=fugalh@falcon.fugal.net) |
| 15:38.29 | wunderkin | there is an agi debug command but ive never had to use it, one other way would be to maybe send text to the verbose log, or maybe run it from the command line |
| 15:38.37 | austinnichols101 | start with editing /var/lib/asterisk/agi-bin/dialparties.agi and putting in debug statements to observe what's happening |
| 15:39.36 | austinnichols101 | the line '-- dialparties.agi: Added extension 200 to extension map' from your pastebin was generated by the agi debug |
| 15:41.11 | donnib | so it's already activated |
| 15:42.53 | austinnichols101 | I'm just saying that you can view the file and see how that line got generated |
| 15:43.29 | *** join/#asterisk BlueDevi1 (n=BlueDevi@scooby.csn.tu-chemnitz.de) |
| 15:44.51 | razu | have anyone got Sweex modem with Intel chip to work ? |
| 15:45.03 | donnib | ok i will take a look. thanx for all your help. |
| 15:45.33 | austinnichols101 | wunderkin: it seems like there's a lot of AAH haters around - I'm not sure why. Any opinions? |
| 15:46.20 | wunderkin | guis and techs dont mix, you dont learn how it works that way |
| 15:46.36 | austinnichols101 | I can understand that |
| 15:47.18 | *** join/#asterisk Drew (n=foo@zux221-065-169.adsl.green.ch) |
| 15:47.49 | Drew | new BETA - firmware is available for the GXP2000 => http://voip-info.org/wiki/view/GXP-2000 |
| 15:47.59 | tzafrir_laptop | austinnichols101, because of the way AAH was put together. It just happens to work. But this is not a maintainable PBX system |
| 15:49.05 | tzafrir_laptop | Kind of the same problem I have with Skype: people use it because it works, and don't worry about the future |
| 15:49.07 | austinnichols101 | what I do like about AAH is that it helps cut down on the learning curve for your first system. |
| 15:49.41 | tzafrir_laptop | austinnichols101, the problem is that too many people keep it as their production system. I do agree that it is a great demo system |
| 15:49.46 | austinnichols101 | but I can see where many people would just stop right there and never try to figure out how it works internally |
| 15:49.54 | *** join/#asterisk coppice_ (n=chatzill@220.202.17.210.dyn.pacific.net.hk) |
| 15:50.27 | austinnichols101 | still, it's positive if it brings more people/visibility to asterisk |
| 15:51.38 | tzafrir_laptop | Sure. I just wouldn't want to see too many broken PBX systems, that's all. |
| 15:51.40 | austinnichols101 | but AMP really has issues as a gui - they're definitly going to have to address that at some point |
| 15:52.07 | tzafrir_laptop | austinnichols101, what do you mean? |
| 15:52.09 | *** join/#asterisk svenna_ (n=svenna@p548D10F7.dip0.t-ipconnect.de) |
| 15:52.14 | {zombie} | Drew: yay, looks like it fixes many of the outstanding issues |
| 15:52.19 | austinnichols101 | yes - shouldn't give everyone a bad name |
| 15:53.13 | austinnichols101 | tzafrir: one of the bigger issues going on over on the AAH forums right now is that of upgrade. |
| 15:53.20 | _Sam-- | Drew: THANKS. |
| 15:53.25 | Drew | zombie - yes but it still seams to have some problems with the displays of older hardware versions |
| 15:53.54 | _Sam-- | the link to the zip file is an old firmware, though. |
| 15:53.59 | austinnichols101 | Since everything is already pre-integrated, it's a problem when you want to upgrade to the latest asterisk build, etc. because you drop faxdetect, etc. and have to add it back in manually |
| 15:54.16 | Drew | no problem - just got the firmware into my hands and i thought that some other ppl might want to try it... |
| 15:54.26 | Drew | hang on - ill fix the link |
| 15:54.44 | austinnichols101 | so you put in the latest build and the amp stops working because of a depracated feature and joe AAH user isn't quite sure of why it's broken or how to fix it |
| 15:55.18 | _Sam-- | ty...they specifically put a feature i requested in there. |
| 15:55.19 | _Sam-- | im happy! |
| 15:55.33 | {zombie} | which one was that sam? |
| 15:55.38 | Drew | zip file link is fixed |
| 15:55.41 | _Sam-- | ability to turn off missed call log |
| 15:55.46 | _Sam-- | from showing on the display |
| 15:55.52 | {zombie} | the features I've been waiting for are the speed dial ones |
| 15:56.05 | _Sam-- | ty drew |
| 15:56.06 | {zombie} | ah yeah, I saw that.. hadn't tried the previous firmware yet so that wasn't an issue for me :) |
| 15:56.52 | *** join/#asterisk Tili (i=Tili@202-133-67-96-dialup.sat.net.pk) |
| 15:57.06 | *** join/#asterisk miguel3239 (n=chatzill@dsl092-074-055.bos1.dsl.speakeasy.net) |
| 15:58.26 | Drew | im still waiting for the LDAP features for the phonebook and sip/sendtext support ;-) |
| 15:59.13 | _Sam-- | based on how responsive they've been...i wouldnt be surprised to see it soon |
| 15:59.19 | _Sam-- | do you talk to bill @ gs? |
| 16:00.11 | Drew | no - i got the firmware from a guy who knows a guy ;) |
| 16:01.58 | *** join/#asterisk TeknoKosh (n=evangeli@210-9-153-195.msi.net.au) |
| 16:03.54 | Drew | the firmware was released via the importer of GS products in germany - he obviously has a inside cut on what is going on at GS |
| 16:05.10 | *** join/#asterisk jhiver (n=jhiver@AStDenis-105-1-4-4.w193-253.abo.wanadoo.fr) |
| 16:05.12 | jhiver | hi lads |
| 16:05.37 | jhiver | can you tell me if there is a way with asterisk to "round robin" outgoing calls to different gateways? |
| 16:05.56 | _Sam-- | WOOP...Disable Missed-Call: No Yes (Missed calls NOT recorded) |
| 16:06.07 | jhiver | i.e. I have N gateways, and the Yth calls goes to gateway no Y% N |
| 16:07.10 | *** join/#asterisk rpm_ (i=russell@S010600111155e117.cg.shawcable.net) |
| 16:08.25 | *** join/#asterisk copantl (n=copantl@205.240.200.121) |
| 16:15.56 | *** join/#asterisk secure75 (n=mic@host-82-135-62-14.customer.m-online.net) |
| 16:17.19 | *** join/#asterisk cpm_ (n=Chip@dns1.eruditium.org) |
| 16:21.12 | *** join/#asterisk RoyK (n=roy@80.239.107.70) |
| 16:24.59 | *** join/#asterisk kn0x (n=atlantic@c-67-165-163-75.hsd1.il.comcast.net) |
| 16:27.06 | *** join/#asterisk fugitivo (n=ajf@201.255.178.118) |
| 16:28.13 | kn0x | ohmy |
| 16:28.21 | *** join/#asterisk bbrdrgz (n=alex@p54B000C8.dip0.t-ipconnect.de) |
| 16:28.22 | kn0x | memory leak fix ehh? |
| 16:28.38 | kn0x | i suppose ill have to take care of that |
| 16:33.54 | *** join/#asterisk websae (i=websae@CPE-24-167-204-30.wi.res.rr.com) |
| 16:34.15 | websae | anyone using a t1 digium card in here? |
| 16:34.19 | websae | if so, how is it working out? |
| 16:34.59 | *** join/#asterisk Koshatul (n=evangeli@210-9-153-195.msi.net.au) |
| 16:36.25 | wunderkin | works good for me, im using 2nd gen firmware |
| 16:36.38 | websae | how much is yoru PRI? |
| 16:38.02 | wunderkin | well mine is for LD only, i assume you mean local |
| 16:38.13 | websae | yes |
| 16:38.14 | wunderkin | and that can vary all over |
| 16:38.16 | websae | you have LD line? |
| 16:38.20 | websae | how does that work? |
| 16:38.22 | bbrdrgz | Hi everyone, i haven't touched asterisk for a while now, i was wondering - Did the chan_sip got fixed to the point of actually complying with rfc during the past year or so ? |
| 16:39.34 | wunderkin | the same way |
| 16:39.44 | websae | how much does that run you? |
| 16:39.47 | websae | unlimited LD? |
| 16:41.42 | wunderkin | no |
| 16:41.42 | websae | hmm? |
| 16:41.42 | *** join/#asterisk dfgas (n=dfgas@adsl-69-210-88-233.dsl.milwwi.ameritech.net) |
| 16:41.45 | dfgas | where would i find a howto on sunrocket? |
| 16:41.47 | wunderkin | just the loop charge, pay per minute |
| 16:42.17 | websae | is that expensive? |
| 16:42.30 | websae | the per minute? |
| 16:42.33 | dfgas | or is ther anyone in here that knows how to set it up? |
| 16:43.25 | Katty | hi lads. |
| 16:44.04 | wunderkin | it depends on your commitment, on the no commit line i have 1.69/min interstate, the intrastate will get you |
| 16:44.13 | leopardus | hello : anyone wants to call me on 737673 in Malta - Europe? |
| 16:44.29 | wunderkin | 500 commit i have 1.2 something |
| 16:48.06 | *** join/#asterisk h4mm3r` (n=h4mm3r@85-18-14-10.fastres.net) |
| 16:49.40 | *** join/#asterisk jmacz (n=jmacz@201.244.199.176) |
| 16:50.31 | *** join/#asterisk af_ (n=af@ip-142-84.sn1.eutelia.it) |
| 16:53.30 | *** join/#asterisk mogorman (i=root@user-24-236-84-48.knology.net) |
| 16:53.34 | *** join/#asterisk jmcc (n=jcorgan@64-142-68-61.dsl.static.sonic.net) |
| 16:58.32 | *** part/#asterisk mogorman (i=root@user-24-236-84-48.knology.net) |
| 16:58.40 | *** join/#asterisk wodantj (n=wodantj@c-1a9e72d5.05-32-6e6b701.cust.bredbandsbolaget.se) |
| 16:59.12 | *** join/#asterisk mogorman (i=root@user-24-236-84-48.knology.net) |
| 17:00.32 | *** join/#asterisk leopardus (n=leopardu@217.22.179.197) |
| 17:02.25 | websae | anyone here have a fiberoptic network? |
| 17:02.42 | websae | i am curious what's a good switch for fiber network |
| 17:03.01 | websae | i have 212 locations that fiber will be ran to |
| 17:06.24 | *** join/#asterisk elg (n=fugalh@falcon.fugal.net) |
| 17:07.55 | cpm_ | If I go there will trouble |
| 17:08.55 | cpm_ | websae, as yesterday. If you want a high density fiber switch, better start cruising ebay. |
| 17:09.03 | cpm_ | Actually, that's a pretty odd question. |
| 17:09.22 | websae | why? |
| 17:09.30 | websae | i am talking about a new switch |
| 17:09.54 | websae | i need to connect 200 locations where i have fiber running to each where there are media converters |
| 17:11.58 | mdave | if you are spending the cash to install 200 fiber runs, you'll probably want to spend the cash for a top of the line catalyst |
| 17:12.22 | *** join/#asterisk RoyK (n=roy@ti211310a080-8845.bb.online.no) |
| 17:12.39 | mdave | in fact, if you've already got to the point where you know you are installing fiber, it baffles me that you waited until now to think about what sort of switch to use |
| 17:12.57 | leopardus | asterisk : please give me a call on fwd 797637 |
| 17:13.23 | websae | my apologies, we're going to be running it |
| 17:13.35 | leopardus | anyone : please give me a call on fwd 797637 |
| 17:13.35 | websae | we are wondering what type of switch to get to handle such |
| 17:13.44 | RoyK | hi |
| 17:14.07 | RoyK | i keep thinking.... |
| 17:14.16 | mdave | do you have a network engineer handling the project? |
| 17:14.35 | websae | not yet |
| 17:14.39 | websae | so a catalyst |
| 17:14.41 | RoyK | for setting up a large-scale asterisk solution, it'd be great to have a really good rtpproxy or mediaproxy replacement |
| 17:14.51 | mdave | Perhaps that should have been your first move |
| 17:15.12 | mdave | Starting a project without having someone that knows what they are doing is always a bad idea |
| 17:15.18 | rpm | leopardus: doesn't work. |
| 17:15.26 | dfgas | where would i find a howto on sunrocket? |
| 17:15.38 | mdave | Becuase once you find that someone, you may find out that the way you've done what youve started may be all wrong |
| 17:15.46 | leopardus | rpm: ?? |
| 17:16.13 | mdave | And to be honest, I doubt you will have much luck finding that someone on this channel - its possible, but doesnt seem to be the best place |
| 17:16.25 | rpm | leopardus: i dialed 797637 and i got service unavailable |
| 17:16.27 | *** join/#asterisk chapeaurouge (n=chap@user-85-201-82-146.tvcablenet.be) |
| 17:16.29 | leopardus | rpm: sorry 737637 |
| 17:16.40 | mdave | Id start with the larger regional ISPs and networking firms in your area |
| 17:16.43 | cpm_ | Sounds like a pretty big project to be dredging irc for clues on. |
| 17:16.48 | mdave | cpm, exactly |
| 17:17.00 | file | irc help is free though |
| 17:17.05 | file | very cost effective |
| 17:17.11 | rob0 | and well worth the cost! |
| 17:17.14 | rob0 | Sometimes! |
| 17:17.21 | leopardus | rpm: try 737673 |
| 17:17.29 | leopardus | rpm: that fwd |
| 17:17.55 | *** join/#asterisk Assid (n=assid@203.115.64.14) |
| 17:17.56 | mdave | If I was dragging fiber to 200 locations, Id be damn sure to have decided what I was going to connect it to before I signed or paid for anything else |
| 17:17.59 | rpm | i have no mic. |
| 17:18.05 | rpm | it is ringing though |
| 17:18.15 | mdave | In fact, I'd probably decide on the hardware first |
| 17:18.18 | rpm | [2006-02-04 10:14:12] -- IAX2/192.246.69.186:4569-7 is ringing |
| 17:18.18 | rpm | [2006-02-04 10:14:23] -- IAX2/192.246.69.186:4569-7 answered SIP/101-b3b1 |
| 17:18.28 | mdave | Even with 200 fiber ports, the switch is probably going to cost less than the fiber runs |
| 17:18.40 | mdave | Unless you are talking incrfedibly short distances, in which case - why fiber? |
| 17:18.58 | leopardus | rpm: you cannot talk with no mic, are u hearing me? |
| 17:19.24 | RoyK | leopardus: you can talk with no mic :) |
| 17:19.29 | rpm | leopardus: im connected via rdp to this machine im not sure.. i do see the mic levels go up and down though so there is audio. |
| 17:19.32 | RoyK | leopardus: but you risk not being heard..... |
| 17:19.53 | cpm_ | rob0, yeah, but thats not exactly a "how do I run asterisk on my wrt54g" kinda question. :) |
| 17:20.52 | dfgas | does packet8 work with asterisk? |
| 17:20.57 | rpm | asterisk on a wrt54g.. what a waste. |
| 17:21.03 | mdave | anyone know what the default timeout is for a DISA, or how to change it? |
| 17:21.15 | mdave | also, is there any way to debug *just* dtmf recognition? |
| 17:21.16 | *** join/#asterisk Jun_ (n=wj1918@pool-138-89-62-149.nwrk.east.verizon.net) |
| 17:21.24 | *** join/#asterisk Darwin35 (n=Darwin@c-24-9-75-234.hsd1.co.comcast.net) |
| 17:21.33 | cpm_ | rpm, similarly clueful question, different scale. |
| 17:21.48 | rob0 | Oh I know cpm_, you are preaching to the choir here ... I am always ignoring people who don't do their homework. |
| 17:21.50 | mdave | Or a 'how do I run asterisk on my Palm III' |
| 17:22.00 | leopardus | hello : I'm testing long distance from Malta - Europe anyone got an FWD number I can call to? |
| 17:22.02 | cpm_ | heh |
| 17:22.16 | *** join/#asterisk ndh-- (n=vayer@dou59-1-82-238-55-84.fbx.proxad.net) |
| 17:22.22 | *** part/#asterisk ndh-- (n=vayer@dou59-1-82-238-55-84.fbx.proxad.net) |
| 17:22.29 | mdave | seriously. If you can answer that one, you've got your crap together ;) |
| 17:23.43 | rob0 | Sometimes I try to be nice and point them in the right direction, but if you're lacking basic understanding of the subject matter and prerequisites, IRC is a poor place to try to get it. |
| 17:25.28 | leopardus | hangup |
| 17:25.34 | leopardus | oops |
| 17:26.14 | af_ | iax2 works udp only, or it can use tcp as well? |
| 17:27.15 | RoyK | rotfl |
| 17:27.25 | RoyK | af_: you can't transport realtime voice over tcp |
| 17:27.44 | RoyK | packet drops, retransmits etc can be really interesting with realtime data |
| 17:28.06 | *** join/#asterisk roulduke_ (i=rytnhx55@p508D36D5.dip0.t-ipconnect.de) |
| 17:28.08 | RoyK | Math`: given a good jitterbuffer, it may sound good, but the latency will prolly be quite bad |
| 17:28.35 | Math` | I mean giving it a bit of loss |
| 17:28.41 | Math` | and hearing how retransmits sounds |
| 17:29.59 | leopardus | exit |
| 17:30.27 | jbalcomb | iCEBrkr I just did a preliminary onsite inspection for my first potential Asterisk system!! woot! $$$ |
| 17:30.37 | RoyK | Math`: that'll only create latency, as tcp will do the retransmits and the reordering |
| 17:30.53 | af_ | mhhh I am wondering so how skype can bypass proxies...... |
| 17:31.02 | Math` | yeah the sound should "pause" for a small bit of time |
| 17:32.02 | RoyK | Math`: given plc that retransmits the last frame, it can get quite interesting |
| 17:32.20 | RoyK | Math`: given plc that interpolates first/next frame it can get even more interesting |
| 17:32.23 | Math` | af_: its a peer to peer network, they use other's bandwidth to do the relay |
| 17:33.28 | af_ | ok Math` let's suppose I have a firewall that blocks all the ports, and the you can surf the net using a proxy: skype is able to work in an anv like this? |
| 17:33.38 | af_ | env, sorry. |
| 17:33.49 | Math` | I don't think so |
| 17:33.58 | af_ | somene told me yes |
| 17:34.08 | Math` | well it needs some outbound ports |
| 17:34.19 | af_ | that is 80 or 443 tcp |
| 17:34.20 | Math` | except if it can use 443 |
| 17:34.27 | Math` | yeah but I doubt it |
| 17:34.32 | af_ | is configurable on the panel also |
| 17:34.39 | af_ | so, it uses tcp |
| 17:34.45 | Math` | and 80 is blocked if you have to use a proxy |
| 17:34.58 | Math` | af_: signalling and voice-stream are two different things |
| 17:34.59 | af_ | no, but you have to do http not only 80 |
| 17:35.20 | Math` | you have to be able to make outgoing connections |
| 17:35.40 | af_ | you can, using a proxy |
| 17:35.46 | Math` | you can poll for incoming calls and make outbound calls using http if you make a small protocol |
| 17:35.54 | Math` | yeah, you can use socks5 |
| 17:35.59 | Math` | but not an http proxy |
| 17:36.15 | Math` | or even socks4, but BIND support is nicer :) |
| 17:37.16 | *** join/#asterisk nextime (n=nextime@213-140-6-103.ip.fastwebnet.it) |
| 17:39.33 | *** join/#asterisk jorge_ (n=jorge@84.77.40.122) |
| 17:40.43 | jorge_ | kram are u there? |
| 17:46.46 | *** join/#asterisk bloch_ (n=lol@c-67-170-7-94.hsd1.wa.comcast.net) |
| 17:50.58 | *** join/#asterisk Flusher (i=flusher@filer.euroserv.com) |
| 17:51.07 | *** join/#asterisk qw3rty (n=qw3rty@c-67-167-79-57.hsd1.il.comcast.net) |
| 17:53.39 | qw3rty | I am setting up asterisk with a Wildcard X100P FXO card. I am in the process of tuning the setting for echo cancelling etc. When I make a call though, when I am not talking to remote end hears complete silence, like the call dropped. Is this Asterisk or the X100P? Is there a way to fix this? |
| 17:54.14 | qw3rty | the call is still there but no noise in the background |
| 17:54.44 | Maxxed- | woo another question |
| 17:54.48 | Maxxed- | after idlin alll night |
| 17:54.50 | *** join/#asterisk krisguy (n=krisguy@h216-170-039-057.adsl.navix.net) |
| 17:55.07 | Maxxed- | i have a TDM02B |
| 17:55.17 | Maxxed- | 2 fxo modules |
| 17:55.29 | Maxxed- | im sure i can, but just making sure.. |
| 17:55.40 | Maxxed- | can i have a call come in on one fxo |
| 17:55.54 | Maxxed- | nobody answers any of the inhouse extintions |
| 17:56.05 | Maxxed- | then the call gets fowarded out the other fxo |
| 17:56.13 | Maxxed- | say to my cell |
| 17:56.24 | Maxxed- | so i dont have to give folks my direct cell # |
| 17:56.48 | Maxxed- | i just give them the home num, if im not there the call goes out my other line |
| 17:58.48 | hypnox | Maxxed- yes, almost anything is possible |
| 17:58.51 | *** join/#asterisk fulgas (n=fulgas@a81-84-117-84.cpe.netcabo.pt) |
| 18:02.06 | Maxxed- | hypnox yeah i was just making sure :) |
| 18:02.07 | Maxxed- | thx |
| 18:02.23 | Maxxed- | now i get to break my configs a few times |
| 18:02.24 | Maxxed- | heh |
| 18:02.35 | Maxxed- | good ol'configuration by trial and error |
| 18:02.36 | *** join/#asterisk Skkip (n=Skipper@216.160.91.91) |
| 18:03.35 | *** join/#asterisk MrBelvedr (n=tt@ip70-187-237-193.dc.dc.cox.net) |
| 18:04.52 | Drew | new BETA - firmware is available for the GXP2000 => http://voip-info.org/wiki/view/GXP-2000 |
| 18:06.06 | _Sam-- | Drew: what is your name on that page? |
| 18:06.12 | _Sam-- | er nm! |
| 18:06.16 | _Sam-- | you are Adrian2k? |
| 18:06.57 | Drew | yep |
| 18:09.22 | _Sam-- | how many gxps do you have / manage? |
| 18:11.46 | *** join/#asterisk fitmark (n=fitmark@82.155.112.114) |
| 18:13.04 | fitmark | Hi, I have a problem with a TDM400P card. I am unable to load the wcfxs module (zaptel 1.0.2). |
| 18:13.48 | fitmark | It worked till today, then I had to reboot the machine and the kernel would not load the module any more. |
| 18:14.13 | fitmark | kernel: 2.4.27 on a debian sarge. |
| 18:14.22 | fitmark | any suggestions? |
| 18:15.29 | mishehu | yeah. |
| 18:15.43 | mishehu | don't use a tdm400 card. I've had too many problems with them. |
| 18:16.00 | fitmark | not an option at the time. :( |
| 18:16.31 | mishehu | but is somethign to think about, especially if you notice you have continued trouble. when you insert the mod to the kernel, what happens? |
| 18:17.03 | fitmark | /lib/modules/2.4.27-1-386/misc/wcfxs.o: init_module: No such device |
| 18:17.04 | fitmark | Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. |
| 18:17.04 | fitmark | <PROTECTED> |
| 18:17.04 | fitmark | /lib/modules/2.4.27-1-386/misc/wcfxs.o: insmod /lib/modules/2.4.27-1-386/misc/wcfxs.o failed |
| 18:17.04 | fitmark | /lib/modules/2.4.27-1-386/misc/wcfxs.o: insmod wcfxs failed |
| 18:17.30 | fitmark | Everything was working well before rebooting. |
| 18:18.05 | fitmark | The kernel does load the zaptel module. But the wcfxs doesn't |
| 18:18.15 | mishehu | does lspci show the device? |
| 18:18.29 | fitmark | yep. |
| 18:18.31 | fitmark | 0000:00:0a.0 Network controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface |
| 18:19.29 | mishehu | did you do anything else to the system besides just reboot? |
| 18:19.57 | fitmark | I moved the machine from one place to another (in the same room). |
| 18:21.01 | mishehu | has it been completely powered off? |
| 18:21.07 | fitmark | Yes. |
| 18:21.59 | mishehu | hmmm did you try to reseat the card in its slot? |
| 18:22.51 | fitmark | not yet. I am remotely solving the problem now. |
| 18:23.53 | fitmark | but that is an option. I thought that if lspci reported the card there were no issues with the PCI slots or the power cable. |
| 18:26.04 | tzafrir_laptop | is that card a Digium TDM400P card? |
| 18:26.06 | *** join/#asterisk kashmish_ (n=kashmish@m1.ince.net) |
| 18:26.31 | fitmark | It wasn't I who bought it, but I guess so. |
| 18:26.38 | tzafrir_laptop | fitmark, lsmod | grep ^zaptel |
| 18:26.56 | fitmark | zaptel 216608 0 |
| 18:27.04 | *** join/#asterisk qw3rty (n=qw3rty@c-67-167-79-57.hsd1.il.comcast.net) |
| 18:27.35 | tzafrir_laptop | did you load it with insmod or with modprobe? |
| 18:27.53 | znoG | ohhhh man i applied the distinctive ring after CID patch to Asterisk, and I actually got much further with my distinctive ring detection, but now they call come in with the same pattern (197,0,0) |
| 18:28.00 | tzafrir_laptop | 2.4.27-1-386 ? Are you aware of later Sarge kernels? |
| 18:28.04 | *** join/#asterisk ToTo (n=ToTo@host51-136.pool875.interbusiness.it) |
| 18:28.12 | fitmark | I guess this last time I used insmod. |
| 18:28.29 | tzafrir_laptop | Are you sure you didn't build the modules vs. kernel-headers-2.4.27-2-386 ? |
| 18:28.43 | fitmark | yep, that's the kernel. And today was the first time I looked into this machine. |
| 18:28.48 | fitmark | let me check. |
| 18:29.27 | fitmark | i'm sure. |
| 18:29.53 | tzafrir_laptop | fitmark, gee, you really should upgrade to that kernel (-2-). It as been released over a year ago. And you can't pool the excuse of not willing to reboot ;-) |
| 18:30.42 | fitmark | eheh, thanks. I probabily am going to upgrade the kernel. |
| 18:31.15 | fitmark | The problem is that if it was working with this one, it should still work even after a simple reboot :). |
| 18:31.24 | tzafrir_laptop | next time: apt-get install kernel-image-2.4-386 |
| 18:31.35 | tzafrir_laptop | This should have taken card of those upgrades |
| 18:31.51 | Drew | _Sam-- - i manage 5 GXP2K's |
| 18:31.52 | tzafrir_laptop | Though try -686 |
| 18:34.21 | *** join/#asterisk kashmish_ (n=kashmish@m1.ince.net) |
| 18:34.51 | fitmark | Any other sugestion ? (thanks tzafrir_laptop and mishehu). |
| 18:35.15 | *** join/#asterisk muzzz_ (n=chatzill@218.111.19.27) |
| 18:35.49 | tzafrir_laptop | fitmark, if the card is a later TDM card, it may require a later version than 1.0.7 . |
| 18:36.22 | tzafrir_laptop | 1.0.9 added support for some newer TDM400P cards |
| 18:36.45 | fitmark | hmm... I guess it is not a later card, since it was working with 1.0.2 till today. |
| 18:36.58 | fitmark | the problem was having to reboot the machine. |
| 18:37.09 | *** join/#asterisk elg (n=fugalh@falcon.fugal.net) |
| 18:37.30 | fitmark | and when it booted it would not load the wcfxs kernel module again. |
| 18:37.39 | tzafrir_laptop | what triggered jbot to say that? |
| 18:37.58 | tzafrir_laptop | fitmark, was it the same kernel? |
| 18:38.05 | *** join/#asterisk azc-uk (n=vircuser@84-45-206-139.no-dns-yet.enta.net) |
| 18:38.13 | fitmark | yep. it was. |
| 18:38.23 | fitmark | The only thing I did was: |
| 18:38.27 | fitmark | 1. shutdown |
| 18:38.30 | tzafrir_laptop | anything interesting on dmesg? |
| 18:38.37 | fitmark | 2. move the machine from one place to another. |
| 18:38.42 | fitmark | 3. turn it back on. |
| 18:38.42 | azc-uk | hi all, can anyone help me with a question about AMP please? |
| 18:38.53 | azc-uk | the links on "setup" appear to have stopped working |
| 18:38.55 | Qwell | ~amp |
| 18:38.57 | jbot | extra, extra, read all about it, amp is NOT supported here! people using it should join #amportal |
| 18:39.39 | tzafrir_laptop | azc-uk, only if you can phrase it as an asterisk question |
| 18:39.49 | azc-uk | oh ok |
| 18:39.51 | azc-uk | let me try |
| 18:40.20 | fitmark | tzafrir_laptop, just a sec please. |
| 18:40.28 | azc-uk | well, i am wondering if my asterisk extension conf file is broken because when i try to access it using amp i get "cannot connect to asterisk manager with admin/amp111" |
| 18:41.35 | tzafrir_laptop | fitmark, did you remove and reinstall the cad? if so: any chance you forgot to connect the power connector? |
| 18:41.54 | fitmark | no, I did not reinstall the card. |
| 18:42.00 | fitmark | It was a simple reboot. |
| 18:42.18 | *** join/#asterisk kashmish_ (n=kashmish@m1.ince.net) |
| 18:42.20 | tzafrir_laptop | azc-uk, take a look at /etc/asterisk/manager.conf |
| 18:42.55 | fitmark | I am trying with kernel 2.4.27-2-686 |
| 18:43.14 | tzafrir_laptop | azc-uk, also: is asterisk actually running? asterisk -r |
| 18:43.31 | fitmark | latter i'll check dmesg and give you something about it. |
| 18:43.45 | azc-uk | tzafrir: yes it is running |
| 18:43.53 | azc-uk | what would i be looking for in the manager.conf? |
| 18:44.25 | azc-uk | oh...one thing i didn't mention |
| 18:44.33 | *** join/#asterisk exstatica (i=exstatic@redline.mednor.net) |
| 18:44.57 | azc-uk | the machine has got an external ip on it - i set up rules for SIP/IAX, but in the manager.conf, there is "port=5038" - not sure what that is for |
| 18:44.59 | *** join/#asterisk qw3rty (n=qw3rty@c-67-167-79-57.hsd1.il.comcast.net) |
| 18:45.27 | azc-uk | aha |
| 18:45.30 | azc-uk | it is a firewall issue |
| 18:45.35 | azc-uk | stopping iptables makes it work |
| 18:45.40 | tzafrir_laptop | azc-uk, sounds like you managed to generate a broken manager config |
| 18:45.51 | *** part/#asterisk SplasPood (n=jwb@brooklyn.paravolve.net) |
| 18:46.05 | azc-uk | tzafrir: i didn't actually change it |
| 18:46.06 | tzafrir_laptop | sorry, misread you |
| 18:46.14 | azc-uk | no worries |
| 18:46.24 | tzafrir_laptop | did it work before? |
| 18:46.53 | azc-uk | well, i was having major issues getting it running with iax full stop - it would work for incoming with iptables stopped |
| 18:47.03 | azc-uk | i surfed for hours then i found another doc saying open udp 8000 |
| 18:47.05 | azc-uk | which makes it work |
| 18:47.16 | *** join/#asterisk ast_freak|Laptop (n=jesse@66-191-130-138.static.roch.mn.charter.com) |
| 18:47.26 | tzafrir_laptop | udp port 8000 ??? |
| 18:47.28 | azc-uk | so iptables is now started, and only now did i notice it wasn;t working |
| 18:47.31 | tzafrir_laptop | udp port 4569 |
| 18:47.36 | azc-uk | that is open too |
| 18:47.43 | azc-uk | but without udp 8000, it doesn't work |
| 18:47.46 | azc-uk | believe it or not |
| 18:48.05 | azc-uk | someone on undernet was helping me yesterday - he was a bit of a guru, and he couldn't figure it out |
| 18:48.14 | tzafrir_laptop | anyway, are there any iptable rules on the localhost interface? not much point blocking it, as no bad guys gonna come from there |
| 18:48.14 | azc-uk | and today i found the udp8000 thing |
| 18:49.19 | azc-uk | i don't really know iptables - how do i tell which rules are associated with localhost? |
| 18:49.38 | tzafrir_laptop | azc-uk, let's check things. First off: is asterisk listening on the manager interface: |
| 18:49.39 | azc-uk | in fact |
| 18:49.47 | tzafrir_laptop | netstat -lntp | grep 5038 |
| 18:50.13 | azc-uk | yes |
| 18:50.22 | azc-uk | thanks for helping by the way |
| 18:50.25 | azc-uk | much appreciated |
| 18:50.52 | tzafrir_laptop | now: from the same system: telnet localhost 5038 |
| 18:51.12 | azc-uk | doesn't work |
| 18:51.25 | tzafrir_laptop | Does it connect? (give a message about Esc character)? |
| 18:51.41 | azc-uk | sorry, i broke it out early....will watch it and wait |
| 18:51.55 | azc-uk | just sitting there |
| 18:51.57 | tzafrir_laptop | It should connect immedietly. |
| 18:51.58 | azc-uk | atm |
| 18:52.19 | tzafrir_laptop | BTW: you are running from the same system as asterisk, right? |
| 18:52.24 | azc-uk | yup |
| 18:52.27 | azc-uk | does the telnet client request come FROM localhost? |
| 18:52.54 | tzafrir_laptop | "localhost" just tells it to go through the loopback interface |
| 18:52.57 | Qwell | if you use localhost as the address, it should |
| 18:53.05 | Qwell | unless you have some seriously broken routes, heh |
| 18:53.11 | tzafrir_laptop | (over-simplification, but never mind) |
| 18:53.13 | azc-uk | i don't think i have |
| 18:53.30 | azc-uk | so, what's next please? |
| 18:53.38 | azc-uk | it's still trying 127.0.0.1 |
| 18:53.53 | *** join/#asterisk SplasPood (n=jwb@brooklyn.paravolve.net) |
| 18:54.00 | tzafrir_laptop | what do you use to configure the firewall? |
| 18:54.05 | azc-uk | command prompt |
| 18:54.15 | azc-uk | sorry, that is a "windows" thing to say |
| 18:54.30 | tzafrir_laptop | do you mean manual runs of iptables? |
| 18:54.35 | azc-uk | yes |
| 18:54.49 | tzafrir_laptop | What will you do on next boot? |
| 18:54.59 | azc-uk | i did do service iptables save |
| 18:55.34 | tzafrir_laptop | I wonder: that "vircuser": do you use virc? |
| 18:55.54 | tzafrir_laptop | (a tiny irc client) |
| 18:56.14 | azc-uk | "Megalith's visual irc 2.0" - a windoze client |
| 18:56.29 | azc-uk | i stopped iptables and managed to telnet in - how do i break the session please? |
| 18:56.50 | tzafrir_laptop | ctrll-] |
| 18:57.04 | tzafrir_laptop | and then press enter, and give the command "quit" |
| 18:57.11 | azc-uk | ooh thanks! |
| 18:58.01 | tzafrir_laptop | this is what the "Escape character" message at the beginning meant: if you send that character you escape to telnet's internal command line |
| 18:58.11 | azc-uk | aag |
| 18:58.12 | azc-uk | aah |
| 18:58.15 | azc-uk | thanks for explaining that |
| 18:58.24 | _Sam-- | cl is shorter than quit :) |
| 18:58.37 | azc-uk | ok - so do i just need a rule to allow all traffic from localhost? |
| 18:59.35 | tzafrir_laptop | azc-uk, it also depends on the order of rules |
| 18:59.47 | tzafrir_laptop | hang on... |
| 19:00.01 | _Sam-- | tzafrir: how did you become so patient with teaching people? :) |
| 19:03.45 | *** join/#asterisk tartar (n=tartar@CPE0004e27b716e-CM014370001917.cpe.net.cable.rogers.com) |
| 19:03.47 | azc-uk | would 'iptables -I INPUT 1 -d 127.0.0.1 -j ACCEPT' work? |
| 19:03.56 | azc-uk | oops |
| 19:03.58 | tzafrir_laptop | azc-uk, try http://tzafrir.org.il/firewall |
| 19:04.04 | Qwell | localhost should always accept.. |
| 19:04.06 | Qwell | no reason not to |
| 19:04.10 | azc-uk | '-s 127.0.0.1' |
| 19:04.52 | tzafrir_laptop | It should give you a nice little firewall script. Also, has a nice feature for testing: |
| 19:04.56 | *** part/#asterisk tartar (n=tartar@CPE0004e27b716e-CM014370001917.cpe.net.cable.rogers.com) |
| 19:05.25 | azc-uk | thanks! |
| 19:05.38 | *** join/#asterisk seant (n=seant@67.105.255.132.ptr.us.xo.net) |
| 19:05.41 | tzafrir_laptop | 'firewall test' runs something like 'echo firewall clear | at +5 min" before doing anything else |
| 19:05.48 | azc-uk | i am going to try learning to see if changing settings for localhost works, and if it doesn't i will run your script |
| 19:05.53 | azc-uk | thanks for sending it though |
| 19:05.55 | tzafrir_laptop | Which can be handy if you're on a remote host |
| 19:06.11 | tzafrir_laptop | azc-uk, wget it |
| 19:06.22 | tzafrir_laptop | and then chmod +x firewall |
| 19:06.53 | *** join/#asterisk pascalek (n=nevermin@aow211.internetdsl.tpnet.pl) |
| 19:06.56 | azc-uk | yay - i fixed it! |
| 19:07.02 | azc-uk | thanks to all of you guys and gals |
| 19:07.23 | *** join/#asterisk zno_ (n=chatzill@user-0cdfqr0.cable.mindspring.com) |
| 19:08.50 | azc-uk | now the only thing left to do is get outgoing iax calls working |
| 19:09.09 | seant | After doing a lot of testing on a crappy compaq box, I purchased a Dell Poweredge 1800 and loaded Asterisk@Home on it without any problems. However, now I can't get any audio from asterisk, but phone to phone conversations work without any problems. Has anyone run into anything like this in the past? (Running asterisk 2.4) |
| 19:09.56 | tzafrir_laptop | seant, you live in the deep future. Asterisk 2.4 is something written in C#, I believe |
| 19:10.03 | *** part/#asterisk SplasPood (n=jwb@brooklyn.paravolve.net) |
| 19:10.15 | tzafrir_laptop | You probably meant a@H 2.4 |
| 19:10.19 | seant | sorry, 1.2.4 |
| 19:10.22 | seant | =) |
| 19:11.43 | tzafrir_laptop | I'm basically on my way out now, but this sounds like some sort of NAT/firewall related issue. |
| 19:11.57 | azc-uk | tzafrir: is that for me or for seant? |
| 19:11.59 | tzafrir_laptop | any NAT/firewall between the phones and Asterisk? |
| 19:12.00 | seant | all of the phones and the asterisk box are on the same network |
| 19:12.10 | tzafrir_laptop | for seant |
| 19:13.07 | azc-uk | one more question, very quickly if yo udon't mind - if i am getting prompts from alison saying all circuits are busy when i call out |
| 19:13.20 | tzafrir_laptop | seant, one other thing to try: can you set an extension to just do "Miliwatt()"? If so: does it produce sound? |
| 19:13.33 | azc-uk | is that be a dial pattern problem, or could it actually be a setup issue with my outbound iax? |
| 19:13.48 | seant | tzafrir_la: let me check |
| 19:14.23 | tzafrir_laptop | azc-uk, now this is phrased as AMP problem. asterisk -rvvv and see if you get to 'Dial' |
| 19:14.27 | seant | Miliwatt()? Does that even exist? |
| 19:14.41 | tzafrir_laptop | sorry: Milliwatt |
| 19:17.08 | azc-uk | it does get to dial |
| 19:18.35 | seant | so, something like this in my extensions.conf? |
| 19:18.36 | seant | exten => 128, Milliwatt() |
| 19:18.40 | tzafrir_laptop | And where does it actually dial to? What error message is there? |
| 19:18.51 | azc-uk | i get iax2/voiptalk2-1 is curcuit-busy# |
| 19:18.59 | azc-uk | oops, the hash is extra |
| 19:19.00 | tzafrir_laptop | seant, exten => 128,1,MilliWatt() |
| 19:19.12 | tzafrir_laptop | no space, and you need a priority number |
| 19:19.23 | seant | oh, right. Thanks |
| 19:19.51 | *** join/#asterisk justinu (n=Justin@cpe-72-129-86-208.socal.res.rr.com) |
| 19:19.52 | azc-uk | also "call rejected by 217.14.132.162 - no authority found |
| 19:19.59 | azc-uk | 217.x.x.x is the iax provider |
| 19:20.09 | seant | tzafrir_la: yeah, that works |
| 19:20.36 | seant | I get a constant tone |
| 19:20.39 | *** join/#asterisk Flusher- (i=flusher@filer.euroserv.com) |
| 19:21.13 | tzafrir_laptop | seant, if that works and nothing else does, I suspect bad timing setup. Do you have zaptel modules loaded? |
| 19:21.28 | seant | tzafrir_la: yes |
| 19:21.54 | tzafrir_laptop | try: zttest |
| 19:21.59 | seant | tzafrir_la: Maybe they are not loaded correctly? |
| 19:22.16 | tzafrir_laptop | does it give something? |
| 19:22.27 | seant | how do I run zztest? |
| 19:22.38 | tzafrir_laptop | zttest . Or better: zttest -v |
| 19:22.55 | tzafrir_laptop | If it hangs up for more than 10 sends you probably have a problem |
| 19:23.14 | seant | From the command line or CLI? |
| 19:23.35 | _Sam-- | command line |
| 19:23.42 | tzafrir_laptop | from the command line . /usr/sbin/zttest , IIRC . Or maybe /sbin/zttest . |
| 19:24.11 | seant | I don't have that. I just have ztcfg and zttool |
| 19:24.35 | tzafrir_laptop | hmmm... try: time head -c 8000 /dev/zap/pseudo |
| 19:25.05 | seant | tzafrir_la: nothing |
| 19:25.10 | tzafrir_laptop | hangs? |
| 19:25.18 | seant | nothing prints |
| 19:25.34 | tzafrir_laptop | ok, probably a timing problem |
| 19:25.54 | tzafrir_laptop | lsmod | grep ^zaptel |
| 19:26.14 | seant | [root@asterisk1 ~]# lsmod | grep ^zaptel |
| 19:26.15 | seant | zaptel 196740 11 ztdummy,wctdm,wcfxo,wcte11xp,wct1xxp,wct4xxp,tor2 |
| 19:26.24 | Qwell | excessive |
| 19:26.28 | tzafrir_laptop | Do you have a digium card? |
| 19:26.35 | seant | Yes, the TE100P |
| 19:27.26 | tzafrir_laptop | Maybe it is configured to get timing from the other end and it is disconnected? |
| 19:27.44 | tzafrir_laptop | Is the card connected to a provider? |
| 19:27.48 | seant | Should I remove the card and try recompiling zaptel? |
| 19:27.50 | seant | no |
| 19:27.59 | tzafrir_laptop | no need to rebuild |
| 19:28.01 | *** part/#asterisk secure75 (n=mic@host-82-135-62-14.customer.m-online.net) |
| 19:28.18 | seant | I am doing testing right now, and I am having a PRI line installed on Friday |
| 19:28.25 | tzafrir_laptop | in zaptel.conf, change the timing parameter. Could you pastebin your zaptel.conf? |
| 19:28.45 | azc-uk | tzafrir, when you have finished looking after seant, i would appreciate it if you would please give me a hand with outbound iax :-( |
| 19:29.06 | _Sam-- | you should be chargined 125/hour for support tzaf |
| 19:29.21 | tzafrir_laptop | I'm leaving soon |
| 19:29.23 | seant | yeah, sorry I am taking up so much of your time |
| 19:29.54 | tzafrir_laptop | _Sam--, it's a good way to learn |
| 19:29.55 | seant | fxsks=1 |
| 19:29.55 | seant | loadzone = us |
| 19:29.56 | seant | defaultzone=us |
| 19:30.00 | tzafrir_laptop | ~pb |
| 19:30.01 | jbot | i heard pb is a place to paste your stuff without flooding the channel - try http://pastebin.com/, or http://pastebin.ca |
| 19:30.16 | seant | sorry, never used pastebin |
| 19:30.18 | tzafrir_laptop | seant, is that your entire zaptel.conf? |
| 19:30.23 | _Sam-- | you're not learning..you already know everything you're telling them :) |
| 19:30.31 | _Sam-- | but they are learning for free |
| 19:31.27 | seant | yes |
| 19:31.40 | tzafrir_laptop | seant, that card is not configured. There is only one FXO channel configured there |
| 19:32.17 | tzafrir_laptop | heack, a three lines paste does not need pastebin. It was a reflex because I thought it would be a longer paste |
| 19:32.57 | tainted- | says you |
| 19:33.05 | tainted- | my terminal is only 20 characters wide |
| 19:33.26 | seant | tzafrir_la: I don't want to waste any more of your time. Ithink you have already helped me find the problem. I can do some googling to find some more info. |
| 19:33.36 | tzafrir_laptop | those were short three lines |
| 19:34.01 | seant | Thanks for your help though. =) |
| 19:34.31 | tzafrir_laptop | seant, take a look at /proc/zaptel . Also google for genzaptelconf . A@H don't bother including my latest version, for some reason. |
| 19:34.43 | seant | ok, will do |
| 19:35.43 | azc-uk | tzafrir: have you got any more time to give me a pointer ? feel free to say no if you gotta go |
| 19:35.50 | azc-uk | oops, forgot to say "please" |
| 19:35.57 | azc-uk | please :-) |
| 19:37.16 | *** join/#asterisk imran (n=a@cpe-68-206-61-183.houston.res.rr.com) |
| 19:37.26 | tzafrir_laptop | azc-uk, not sure. Try going over your config. For starters, check if you're really registered |
| 19:37.34 | tzafrir_laptop | iax2 show registry |
| 19:37.41 | tzafrir_laptop | bye folks |
| 19:37.44 | azc-uk | thanks |
| 19:38.08 | *** join/#asterisk Flusher (i=flusher@filer.euroserv.com) |
| 19:38.20 | Skkip | is there a limit to meetme? providing CPU and Bandwith is not an issue? |
| 19:40.13 | *** join/#asterisk popvoxdave (n=popvoxda@c-68-33-130-204.hsd1.md.comcast.net) |
| 19:40.19 | *** part/#asterisk popvoxdave (n=popvoxda@c-68-33-130-204.hsd1.md.comcast.net) |
| 19:40.51 | SpaceBass | anyone know a provider with french (Paris) DIDs? |
| 19:46.45 | *** join/#asterisk ptblank (n=MURDER1@68-169-161-61.lmdaca.adelphia.net) |
| 19:56.49 | *** join/#asterisk ast_freak|Laptop (n=jesse@66-191-130-138.static.roch.mn.charter.com) |
| 20:00.43 | *** join/#asterisk alexhopper (n=a27386@CPE000103d29ae2-CM001225dfdfe0.cpe.net.cable.rogers.com) |
| 20:06.20 | *** join/#asterisk crich1999 (n=crich@port-212-202-201-26.dynamic.qsc.de) |
| 20:09.35 | *** join/#asterisk ToTo (n=ToTo@host51-136.pool875.interbusiness.it) |
| 20:24.08 | *** join/#asterisk brif8 (n=Techno@lazyjtrainingcenter.com) |
| 20:24.51 | brif8 | Was there an older Digium Card X100P which did a single T1 (cat 5) port, that shows something like "Wildcard X 100P" |
| 20:25.13 | Qwell | t100p or something |
| 20:25.23 | Qwell | why not just buy a good one from Digium? |
| 20:25.36 | pb_ | brif8: the x100p was a single port POTS FXO card |
| 20:26.36 | brif8 | pb_: nope I think this one was T1. I had 20 copper lines connected into an ADIT 600, which then connected into my * box with a cat5 cable which I think was T1. |
| 20:26.45 | Qwell | t100p |
| 20:26.52 | Qwell | open your eyes :p |
| 20:27.06 | *** join/#asterisk Abydos313 (i=justcall@72.20.3.66) |
| 20:27.21 | *** join/#asterisk lesouvage (n=lesouvag@82.74.11.143) |
| 20:27.23 | mzo | why did Digium stop making x100ps? |
| 20:27.48 | Qwell | They were junk :p |
| 20:27.55 | mzo | really? |
| 20:27.57 | Qwell | the other cards are far better |
| 20:28.00 | mzo | i mean even the real ones? |
| 20:28.08 | mzo | what if that's your actual application though, i mean hooking up analog phone lines? |
| 20:28.20 | Qwell | ~wikis |
| 20:28.22 | jbot | well, wikis is http://www.voip-info.org |
| 20:28.22 | Qwell | ~docs |
| 20:28.23 | jbot | docs is, like, probably Documentation can be found at http://www.digium.com/index.php?menu=documentation or http://www.digium.com/handbook-draft.pdf or http://www.voip-info.org/wiki-Asterisk or http://www.asteriskdocs.org or http://www.oreilly.com/catalog/asterisk or http://www.asteriskguru.com, or http://www.astmasters.net/howtos.html |
| 20:28.23 | brif8 | Qwell: could have been t100p it's been a few years and I no longer work on that machine that I can just go look it up quickly. |
| 20:28.23 | pb_ | brif8: it might well be a T1 card, but in that case it is not an x100p. like Qwell says, it is probably a t100p or some such. |
| 20:28.24 | Qwell | Abydos313: ^ |
| 20:28.30 | Abydos313 | Hi |
| 20:28.39 | Abydos313 | excellent thx |
| 20:28.50 | brif8 | what would Redhat have reported the t100p as a "wildcard t100p" ?? |
| 20:28.51 | pb_ | mzo: if you want to hook up analog phone lines, digium will sell you a TDM400 board. |
| 20:29.04 | mzo | but if it's just one analog phone line? Isn't that overkill =) |
| 20:29.47 | pb_ | if you just want one line, you might be better off with a standalone ATA: sipura spa3000 or some such. |
| 20:29.48 | *** join/#asterisk justin1 (n=Justin@cpe-72-129-86-208.socal.res.rr.com) |
| 20:29.55 | rob0 | You can always get one FXO plus 1-3 FXS modules for the TDM400. |
| 20:30.09 | mzo | <PROTECTED> |
| 20:30.27 | Qwell | mzo: From $140-350 or so, depending on number and type of ports |
| 20:30.27 | lesouvage | mzo: with one anolog line an x100p (clone or original) card will do fine to start with. |
| 20:30.28 | pb_ | certainly more than the x100p, but I guess you get what you pay for. |
| 20:30.45 | pb_ | mzo: fwiw, there are usually a couple of folks selling x100p clones on ebay for $10 or thereabouts |
| 20:31.04 | pb_ | if an x100p is what you want, that's the place to go |
| 20:31.23 | rob0 | Yes, the clones are cheap, and they sort of work, within the limitations of the hardware design. |
| 20:31.23 | mzo | nah no more clones. |
| 20:31.42 | mzo | I'd rather buy a real one, i have a single real x100P and two clone boards and i'd rather swap them all out |
| 20:32.01 | mzo | my 'work' asterisk server has real digium hardware and it's so much different, and better sounding. |
| 20:32.18 | brif8 | has the t100p now been replaced with with the t110p ? |
| 20:32.30 | Qwell | brif8: te1xxp |
| 20:32.57 | brif8 | sorry meant te110p, ok great thanks |
| 20:33.05 | rob0 | I have a clone for FXO and a TDM400 with a single FXS. Calls from/to the POTS line sound okay. |
| 20:34.47 | lesouvage | On behalve of a third party I'm in the proces of realizing a complete and up to date voice promt set for asterisk in Dutch. I'm looking for a list with the voiceprompts linked with the applications thye will use them and the text that I have to translate. Is there such a list and where can I found it? |
| 20:35.48 | lesouvage | Any help would be appriciated |
| 20:42.20 | infinity2 | anyone know when the debain asterisk packages will be updated? |
| 20:43.00 | Nugget | Just build it yourself. :) |
| 20:43.03 | *** join/#asterisk imran (n=a@cpe-68-206-61-183.houston.res.rr.com) |
| 20:43.34 | _Sam-- | what debian package are you running right now? |
| 20:43.42 | infinity2 | 1.2.1 |
| 20:44.09 | _Sam-- | is there something in 1.2.4 that you need? |
| 20:44.42 | _Sam-- | because 1.2.1 seems fine |
| 20:44.55 | _Sam-- | (i run it on still on 3 boxes...dont want to wake up one day and find my crap not working) |
| 20:45.05 | _Sam-- | which has been the case with most of the other ones |
| 20:45.07 | hardwire | _Sam--: you are a talker |
| 20:45.17 | _Sam-- | im all talk |
| 20:45.26 | infinity2 | there are a lot of fixes since 1.2.1. |
| 20:45.33 | infinity2 | segfaults, memory leaks. |
| 20:45.37 | _Sam-- | that is from 1.2.2 |
| 20:45.42 | _Sam-- | 1.2.1 didnt have the probs |
| 20:45.46 | Qwell | Yes it did |
| 20:46.20 | infinity2 | mine use to segfault all the time till i went though my extensions and specificed voicemail contexts |
| 20:46.34 | infinity2 | now it just dies maybe twice a month |
| 20:46.50 | _Sam-- | i have 1.2.1 on three boxes with no problems i guess im just lucky |
| 20:47.07 | _Sam-- | and i was under the impression the memory leaks came in 1.2.2 |
| 20:47.26 | *** join/#asterisk DEJ (n=A_mail@pool-68-238-244-251.phlapa.fios.verizon.net) |
| 20:48.25 | X-Rob | _Sam--, no, they've been around since $[ .. ] |
| 20:49.18 | infinity2 | i think i'm going to permantely give up on voxee also :) |
| 20:49.39 | infinity2 | who else is similar to voipjet and voxee? |
| 20:50.09 | brif8 | which extensions command would I look for to route calls based on the number called. I have two numbers and wish to route the calls based on the number dialed. |
| 20:50.27 | Qwell | brif8: two ways... |
| 20:50.34 | Qwell | GotoIf, or CID matching |
| 20:50.36 | Qwell | so like |
| 20:50.46 | Qwell | s/5551212,1,DoSomething |
| 20:50.47 | Qwell | or |
| 20:51.02 | *** join/#asterisk mogorman (i=root@user-24-236-84-48.knology.net) |
| 20:51.13 | Qwell | s,1,GotoIf($[${CALLERID(num)} = 5551212]?blah) |
| 20:51.16 | Qwell | or some such |
| 20:51.24 | Qwell | Mr. Ogorman! |
| 20:51.32 | brif8 | Qwell: thanks man !!!! I take it 5551212 is my number which they called right ? |
| 20:51.40 | _Sam-- | how are you supposed to know what changed there are version to version...if there is no changelog type file with the source? |
| 20:51.43 | Qwell | brif8: oh...number they calleD...no |
| 20:51.49 | Qwell | That's the callers number |
| 20:51.51 | _Sam-- | er |
| 20:51.56 | _Sam-- | i guess i need to open my eyes |
| 20:51.58 | Qwell | brif8: What type of channel? |
| 20:52.24 | brif8 | T1, which has five seperate numbers assigned to it |
| 20:52.44 | Qwell | I don't know anything about PRI... I imagine it doesn't use s |
| 20:52.52 | Qwell | You'd probably just do like |
| 20:52.58 | Qwell | 5551212,1,DoSomething() |
| 20:53.02 | brif8 | just on two if they dial 18001111111 then it goes to Sip/202 whereas if they dial 18002222222 it goes to my cell phone |
| 20:53.02 | Qwell | 5551213,1,DoSomething() |
| 20:54.13 | brif8 | Qwell: that would still be recorded as a call received in master.csv right ? |
| 20:54.19 | Qwell | sure |
| 20:54.40 | brif8 | great thanks man :) |
| 20:55.52 | *** join/#asterisk heison (n=heison@CPE000a01d49e6f-CM00111a59bec2.cpe.net.cable.rogers.com) |
| 20:56.38 | *** join/#asterisk spunz (n=spunz@h081217096096.dyn.cm.kabsi.at) |
| 20:57.13 | brif8 | Qwell: seeing you have all the answer ;_ ;) you don't know a site that can give me T1 costs for a zip code ? |
| 20:57.27 | Qwell | no, but if you called they'd be happy to tell you |
| 20:58.44 | lesouvage | brif8: you should add an extension with the number to the context named in the zapata.conf. exten => 123456778,1,goto(menu1,s,1) or something like that. It's working for me. |
| 20:59.00 | lesouvage | 123456778 is your number. |
| 21:00.01 | brif8 | lesouvage: care to pastebin your zapata.conf and extensions for me to see (the part where your route the incoming call), please ? |
| 21:00.11 | lesouvage | This way you can route every number to a different extension or even to a different asterisk box. |
| 21:01.02 | lesouvage | brif8: wait a moment. |
| 21:01.09 | brif8 | ok thanks |
| 21:01.10 | *** join/#asterisk techie (i=gus@antibala.com) |
| 21:02.38 | *** join/#asterisk natrualblue (n=naturalb@195.26.12.229) |
| 21:02.54 | natrualblue | hi there |
| 21:03.18 | natrualblue | im usinga grandstream gxp2000 but only seem to be able to get 1 incoming call |
| 21:03.20 | *** join/#asterisk iq (n=iq@71-214-6-43.omah.qwest.net) |
| 21:03.29 | natrualblue | anything else goes to voicemail |
| 21:03.31 | natrualblue | any idea |
| 21:06.01 | *** join/#asterisk schuylerdigium (n=Bosco@gateway.digium.com) |
| 21:06.50 | _Sam-- | there is a setting on the phone |
| 21:06.54 | _Sam-- | its called "disable call waiting" |
| 21:06.59 | _Sam-- | make sure that you dont have that selected |
| 21:08.16 | lesouvage | brif8: see http://pastebin.ca/40005 . This is a reallife working example. |
| 21:08.34 | brif8 | lesouvage: thanks man |
| 21:08.42 | _Sam-- | Qwell: how do i make the warnings and notices show up in color on the CLI ...i made a new 1.2.4...but they dont show in color |
| 21:08.43 | *** join/#asterisk twisted[mobile] (n=twisted@asterisk/friend-and-developer/pdpc.professional.twisted) |
| 21:08.43 | *** mode/#asterisk [+o twisted[mobile]] by ChanServ |
| 21:08.56 | natrualblue | thanx _sam |
| 21:09.20 | _Sam-- | sure thing...hope it helped |
| 21:09.28 | _Sam-- | did you get the new firmware? |
| 21:09.32 | _Sam-- | some just came out today |
| 21:09.36 | natrualblue | yep |
| 21:09.49 | natrualblue | its pure silk in a glass |
| 21:09.59 | lesouvage | brif8: does it make sence to you? |
| 21:10.07 | natrualblue | yep |
| 21:10.10 | natrualblue | i love it |
| 21:10.26 | _Sam-- | the phones are definitely getting better...one day at a time. |
| 21:10.33 | brif8 | lesouvage: yes. in zapata.conf you specify the context and in extensions.conf you have the context and what happens |
| 21:10.36 | natrualblue | the menus and the configs straight from the lcd |
| 21:10.42 | natrualblue | excellent |
| 21:10.52 | _Sam-- | what firmware did you have before? |
| 21:11.43 | natrualblue | i had 1.0.13 and then 1.0.2.3 |
| 21:11.51 | natrualblue | sam i have call waiting enabled |
| 21:11.57 | lesouvage | brif8: that the idea. You can use the gotoif lines to make a difference depending on the time of the day. |
| 21:12.41 | brif8 | yeah I'm worried about the time of day but more NB the actual number of mine which they called. I have multiple incoming numbers |
| 21:13.52 | natrualblue | sam it might be a mistake in the new firmware |
| 21:14.22 | _Sam-- | could be...my gxp here isnt setup for incoming |
| 21:14.26 | _Sam-- | so i cant test |
| 21:15.19 | _Sam-- | i definitely have all my outgoing line appearances though |
| 21:16.21 | *** join/#asterisk Pegger (n=peg@pool-68-163-180-64.bos.east.verizon.net) |
| 21:16.32 | lesouvage | brif8: you have to add an extension for every number you want to be processed by the asterisk box. You don't need to point them to another menu but you can. For testing it is usefull to first point it to a counter. You can hear if it's working. When the counter works you can route the call to whatever you think is usefull. |
| 21:17.08 | *** join/#asterisk bloch (n=lol@c-67-170-7-94.hsd1.wa.comcast.net) |
| 21:17.24 | *** part/#asterisk imran (n=a@cpe-68-206-61-183.houston.res.rr.com) |
| 21:17.43 | natrualblue | i can make multiple outbound calls |
| 21:17.53 | natrualblue | just any secondary inbound go to VM |
| 21:18.00 | natrualblue | maybe its my PBX |
| 21:18.27 | brif8 | lesouvage: yeah I'll test it, I was mistake to think that all incoming calls HAD to go to s,1,1 ...... I didn't realise that I could have mynumber1,1,1 ...... and mynumber2,1,1 ..... that if someone called mynumber1 that is would be handled different that s and mynumber2. |
| 21:18.30 | natrualblue | brb |
| 21:18.34 | lesouvage | brif8: for counter code see http://pastebin.ca/40007 |
| 21:19.12 | kuku5 | Anyone else having problems with cisco 7960 resetting itself or just freezing ? |
| 21:20.43 | natrualblue | sorry mate only have a gxp2000 and a cisco ata 186 with 2 analog phones connected |
| 21:20.57 | natrualblue | have to say th e ata is rubbish |
| 21:24.01 | *** join/#asterisk Koshatul (n=evangeli@ip157-65-132.cust.bit.net.au) |
| 21:26.44 | natrualblue | im using A@H 2.4 |
| 21:26.52 | natrualblue | it has the memeory leak so maybe its that |
| 21:29.40 | mzo | there isn't a new version of aah yet? |
| 21:30.00 | Skkip | is there a limit to meetme? providing CPU and Bandwith is not an issue? |
| 21:30.17 | *** join/#asterisk cpm_ (n=Chip@dns1.eruditium.org) |
| 21:34.43 | *** join/#asterisk iDunno (n=brettp@miranda.sommitrealweird.co.uk) |
| 21:35.55 | *** join/#asterisk iDunno (i=brettp@miranda.sommitrealweird.co.uk) |
| 21:37.55 | cpm_ | Okay, first time trying this. My local telephone wants 7 digits for a local call. errg, I don't even know how to explain it. |
| 21:38.01 | cpm_ | Sorry, just thinking out loud |
| 21:42.50 | *** join/#asterisk ctooley (n=ctooley@rrcs-24-227-212-163.sw.biz.rr.com) |
| 21:44.38 | *** part/#asterisk shido6 (n=shido@d221-68-216.commercial.cgocable.net) |
| 21:47.55 | *** join/#asterisk pigpen2 (n=mark@fw.seamans.cc) |
| 21:48.49 | *** join/#asterisk shido6 (n=shido@d221-68-216.commercial.cgocable.net) |
| 21:49.10 | natrualblue | mzo there is a new 2.5 just d/l now |
| 21:49.12 | cpm_ | Got it. |
| 21:49.24 | mzo | ooh, yay, lemme go look |
| 21:50.10 | natrualblue | the irish server doesnt how it but the uk one does |
| 21:58.43 | *** join/#asterisk juanjoc (n=jcomella@222-32-235-201.fibertel.com.ar) |
| 22:04.28 | *** join/#asterisk RoyK (n=roy@host-81-191-147-248.bluecom.no) |
| 22:09.34 | X-Rob | Geez |
| 22:09.55 | X-Rob | Downloading a new version of aah just to upgrade asterisk |
| 22:09.59 | X-Rob | it's not that difficult, people. |
| 22:17.00 | *** join/#asterisk mogorman (i=root@user-24-236-84-48.knology.net) |
| 22:17.41 | *** join/#asterisk gvag11 (n=g@ppp51-adsl-23.ath.forthnet.gr) |
| 22:19.51 | EriSan | someone have * running on OpenVZ ? |
| 22:30.04 | *** join/#asterisk netsurfer (n=bbjunkie@i-83-67-48-18.freedom2surf.net) |
| 22:31.39 | netsurfer | hi all |
| 22:33.32 | *** join/#asterisk jdiskywlkr (n=kvirc@ip68-0-83-251.tu.ok.cox.net) |
| 22:34.32 | *** join/#asterisk jeebusroxors (n=jeebus@29palms-cuda1-68-170-36-65.losaca.adelphia.net) |
| 22:35.10 | jeebusroxors | hey anyone around willing to work with me on a silly little problem - im an asterisk noob heh.... |
| 22:36.52 | cpm_ | I'd love to, but I'm a bit of noob myself. Might want to try asking your question. |
| 22:37.11 | cpm_ | <PROTECTED> |
| 22:38.56 | jeebusroxors | true - but i hate people who just come in and ask a question - seems so demanding... |
| 22:39.26 | X-Rob | No |
| 22:39.26 | X-Rob | it's really annoying when people waffle on |
| 22:39.37 | X-Rob | If you can ask a question, people will wander through, and either know the answer and answer it, or not know it and not answer it. |
| 22:39.47 | X-Rob | (hint: ask your question) |
| 22:39.48 | jeebusroxors | the problem be this: im trying to get two SIP softphones connected and im getting a 603 declined |
| 22:40.47 | X-Rob | ok, so what is /var/log/asterisk/full telling you? |
| 22:41.42 | jeebusroxors | i dont have a full and in event there is nothing |
| 22:42.21 | X-Rob | edit /etc/asterisk/logger.conf and add or uncomment "full => notice,warning,error,debug,verbose" |
| 22:42.29 | X-Rob | then 'logger reload' in the asterisk console |
| 22:46.48 | jeebusroxors | 'no application dial....' would be a bad thing hmm? |
| 22:47.05 | *** join/#asterisk jeffgus (n=jeffgus@greengables.zimage.com) |
| 22:47.31 | *** part/#asterisk ctooley (n=ctooley@rrcs-24-227-212-163.sw.biz.rr.com) |
| 22:49.06 | X-Rob | Boggle. |
| 22:49.09 | X-Rob | Yes, it would |
| 22:49.14 | X-Rob | asterisk console, 'show application dial' |
| 22:49.34 | jeebusroxors | not registered.... |
| 22:49.47 | X-Rob | you've stuffed the install somehow |
| 22:49.51 | X-Rob | What version are you running? |
| 22:50.00 | jeebusroxors | haha... |
| 22:50.10 | jeebusroxors | 1.2.4 |
| 22:50.17 | X-Rob | Wierd. |
| 22:50.29 | jeebusroxors | yea well |
| 22:50.37 | jeebusroxors | ha - ill go recompile then yay |
| 22:50.40 | jeebusroxors | thanks fer the help |
| 22:50.41 | X-Rob | wait |
| 22:50.49 | X-Rob | does /usr/lib/asterisk/modules/app_dial.so exist? |
| 22:50.49 | jeebusroxors | waiting |
| 22:51.15 | *** join/#asterisk mistral (i=mistral@jstevenson.plus.com) |
| 22:51.37 | jeebusroxors | yea |
| 22:52.12 | natrualblue | hey x-rob |
| 22:52.24 | natrualblue | thanx for that killer paging app |
| 22:52.24 | X-Rob | ok, edit /etc/asterisk/modules.conf - really the only thing you need in there is [modules] and autoload=yes |
| 22:52.35 | X-Rob | natrualblue, I'm doing some changes to it today |
| 22:52.44 | natrualblue | what are you chaging |
| 22:52.50 | natrualblue | im mad interested |
| 22:53.00 | X-Rob | supporting older snom's (eg, 220's) and setting up groups. |
| 22:53.13 | natrualblue | iwas loking for you the other day as stupidity caused me not to get it working |
| 22:53.17 | X-Rob | Going to tie it into AMP |
| 22:53.25 | natrualblue | kick ass |
| 22:53.26 | X-Rob | natrualblue, yeah, I saw you on #openpbx, but I was off working 8) |
| 22:53.36 | natrualblue | truely you are aking aong men |
| 22:53.50 | natrualblue | a king among men |
| 22:53.58 | *** join/#asterisk MikeJ[Laptop] (n=vircuser@d14-69-8-30.try.wideopenwest.com) |
| 22:54.01 | natrualblue | its a fantatsic app |
| 22:54.09 | natrualblue | cleanly written |
| 22:54.33 | natrualblue | my only problem is the f*&^%kin ata 186 i have |
| 22:54.47 | natrualblue | but thats nothing to do with you |
| 22:54.48 | neon_kl | ftp://wedphoto@weddingphotos.com.my@www.weddingphotos.com.my/www/admin |
| 22:55.53 | natrualblue | x-rob |
| 22:56.01 | natrualblue | can i ask a Q |
| 22:56.08 | natrualblue | its not a fix it Q |
| 22:56.09 | *** join/#asterisk Katty (n=angela@64.82.232.54) |
| 22:56.10 | X-Rob | natrualblue, just ask. |
| 22:56.14 | natrualblue | just a i want to know more |
| 22:56.15 | X-Rob | Don't ask if you can ask. Just ask. |
| 22:56.21 | natrualblue | in the app |
| 22:56.32 | jeebusroxors | X-Rob; doing that gives me a whole bunch of errors and kills the server.... |
| 22:56.38 | natrualblue | the meetme on the paging sender has dq |
| 22:56.49 | natrualblue | and then recipents have dmq |
| 22:56.49 | X-Rob | jeebusroxors, ok. Something's wierd. |
| 22:56.57 | natrualblue | i have messed with these |
| 22:57.09 | X-Rob | natrualblue, type 'show application meetme' to find out what those options do |
| 22:57.10 | natrualblue | and get that m = memeber |
| 22:57.24 | natrualblue | but waht do the rest represent |
| 22:57.32 | natrualblue | cool |
| 22:57.44 | natrualblue | i typed before i read your reply |
| 22:58.01 | X-Rob | jeebusroxors, can I ssh to your machine? |
| 22:58.14 | jeebusroxors | X-Rob; no...stealing wifi heh.... |
| 22:58.23 | *** join/#asterisk zeedo (n=zeedo@reboot-robot.net) |
| 22:58.25 | X-Rob | Hrm. |
| 22:58.47 | X-Rob | Well, you'll have to find out which modules are killing asterisk, and put noload=>modulename.so |
| 22:59.02 | X-Rob | but if you've done a clean install, nothing should be dying. |
| 22:59.04 | natrualblue | excellent |
| 22:59.10 | natrualblue | i know know |
| 22:59.18 | znoG | hrm, apart from rebuilding every time you make a change to code, how else can you "quickly" make a change to Asterisk code and see the impact? |
| 22:59.28 | X-Rob | znoG, ??? |
| 22:59.29 | natrualblue | i wish A@h had a decent upgrade option# |
| 22:59.40 | natrualblue | other htan the bacjup restore crap |
| 22:59.54 | X-Rob | natrualblue, just upgrade asterisk. |
| 23:00.02 | natrualblue | sorry about the spelling |
| 23:00.11 | X-Rob | AMP has a great upgrade procedure, and nothing needs to be upgraded in asterisk. |
| 23:00.19 | X-Rob | uh |
| 23:00.20 | natrualblue | is that the only chnage in A@H |
| 23:00.26 | copantl | any body know where i can found support for a tormenta2 card? |
| 23:00.27 | X-Rob | nothing needs to be _changed_ when upgrading asterisk |
| 23:00.44 | natrualblue | i thught asterisk had a memory leak |
| 23:00.54 | X-Rob | yeah. So just download 1.2.4, compile, install |
| 23:00.58 | Pegger | is it possible to build asterisk with unixodbc support withount installing unixodbc on the box that asterisk is on |
| 23:01.01 | X-Rob | nothing needs to be changed. |
| 23:01.01 | znoG | X-Rob: say I make a change to chan_zap.c, I want to see how the change affected the behaviour of Asterisk quickly, but I guess I have no option but to rebuild. |
| 23:01.12 | X-Rob | znoG, if you've changed a C file, it needs to be compiled. |
| 23:01.20 | natrualblue | it will sit onto of the install i have without Q |
| 23:01.25 | X-Rob | natrualblue, yup |
| 23:01.32 | EriSan | guys, anyone have * running on OpenVZ ? |
| 23:01.42 | natrualblue | i feel the fool |
| 23:01.44 | X-Rob | Pegger, no, you need the odbc client stuff. |
| 23:02.08 | X-Rob | EriSan, no-one answered last time. I'd say 'try it' |
| 23:02.19 | natrualblue | is there an upgrade script or do i have to do it manually |
| 23:02.25 | X-Rob | but don't expect timing sources to work (eg, meetme, music on hold) |
| 23:02.34 | EriSan | X-Rob, thats what i'm doing, but without much success |
| 23:02.39 | Pegger | X-Rob, well which If I just want to run the unixodbc from the database server why cant i just do that |
| 23:02.57 | X-Rob | natrualblue, download asterisk. type 'make upgrade' |
| 23:03.11 | X-Rob | that'll install over the top of your existing asterisk. |
| 23:03.13 | Pegger | X-Rob, are you saying that timing does not work with realtime |
| 23:03.23 | X-Rob | then just asterisk -rx "stop now" |
| 23:03.32 | natrualblue | excellent |
| 23:03.36 | X-Rob | Pegger, uh? |
| 23:03.37 | *** join/#asterisk imran (n=a@cpe-68-206-51-113.houston.res.rr.com) |
| 23:03.42 | natrualblue | last Q |
| 23:03.46 | natrualblue | ftp or svs/svn |
| 23:03.50 | natrualblue | cvs/svn |
| 23:03.51 | Pegger | X-Rob, "but don't expect timing sources to work (eg, meetme, music on hold)" |
| 23:03.52 | X-Rob | Pegger, I'm saying that it's unlikely a virtual host will have a functioning timing source. |
| 23:04.34 | Pegger | X-Rob, i am not planing on running it in a vertrual host, just on diffrent machines all toghter |
| 23:04.42 | X-Rob | Pegger, I was talking to EriSan |
| 23:05.00 | znoG | X-Rob: yeah, i figured :) |
| 23:05.23 | znoG | X-Rob: just thought programmers have a way of shortcutting it so that they don't rebuild the entire Asterisk source to see a change in, say, chan_zap.c |
| 23:05.35 | Pegger | X-Rob, ok then plase direct your answers to somewone an not just the whole room please |
| 23:05.42 | Pegger | it can become confusing |
| 23:05.43 | X-Rob | znoG, you don't. If you change chan_zap.c, and type 'make', it will only rebuild chan_zap |
| 23:06.07 | X-Rob | Pegger, Since you're incapable of keeping track of conversations, I'll just simply stop answering your question. Easily solved. |
| 23:07.21 | znoG | X-Rob: ah, yes. :) |
| 23:07.28 | mzo | haha |
| 23:07.55 | X-Rob | znoG, and 'make upgrade' will install it |
| 23:08.07 | X-Rob | (another hint) |
| 23:08.08 | X-Rob | 8) |
| 23:08.08 | *** part/#asterisk schuylerdigium (n=Bosco@gateway.digium.com) |
| 23:11.12 | znoG | X-Rob: make upgrade will just install the modified files since the last make? |
| 23:13.15 | X-Rob | it'll replace all the modules and the asterisk binary, but won't bother with sounds and config files |
| 23:13.41 | X-Rob | but since you've only changed one file, the result is the same as if it just installed the one file you've changed |
| 23:14.00 | *** join/#asterisk konoa (n=refused@69.90.202.130) |
| 23:14.57 | *** join/#asterisk AJMn (i=AJay@63.231.252.9) |
| 23:15.48 | AJMn | can someone help me figure out why, when ur redirected to voicemail and you get the beep, it automaticlly starts playing VM-Review not giving the caller any time to record message? |
| 23:16.26 | X-Rob | AJMn, possibly because it can't open the voicemail directory for writing. |
| 23:16.57 | X-Rob | Check the permissions on /var/spool/asterisk/voicemail |
| 23:17.14 | AJMn | what permission should it have? |
| 23:17.39 | AJMn | oh sweet.. no voicemail dir |
| 23:17.41 | X-Rob | The correct, albeit useless answer is 'Permissions that allow asterisk to write to it' |
| 23:18.03 | X-Rob | or, yes, the directory might not be there at all 8) |
| 23:19.30 | *** join/#asterisk mistral (i=mistral@jstevenson.plus.com) |
| 23:19.57 | copantl | can i change a V400P card from T1 to E1? |
| 23:20.28 | *** join/#asterisk poiupoiu (i=Gomez@146.229.185.138) |
| 23:21.33 | X-Rob | copantl, looks like they're different cards. V400P-T and V400P-E |
| 23:21.50 | tainted- | can i request a feature? |
| 23:22.03 | rob0 | NO |
| 23:22.09 | X-Rob | *laugh* |
| 23:22.18 | mzo | i want asterisk to take over the world! that's my feature request, please put for 1.2.5 plzkthx |
| 23:22.39 | mzo | although that would probably have to wait until 2.0 :P |
| 23:22.45 | tainted- | my request is more encompassing |
| 23:22.58 | X-Rob | tainted-, the question you want to ask is 'How do I do...' |
| 23:23.00 | tainted- | just want a timeout parameter for ParkAndAnnounce |
| 23:23.17 | konoa | hey guys, i'm wondering if you could point me in the right direction: i want to place a call thru my asterix server, basically a call saying "Reminder, you have something due in X days" |
| 23:23.33 | konoa | but i need to trigger it from elsewhere, say, a web script |
| 23:23.35 | tainted- | oh wait |
| 23:23.39 | tainted- | it's been added?! |
| 23:23.39 | X-Rob | [Description] |
| 23:23.39 | X-Rob | <PROTECTED> |
| 23:23.41 | tainted- | damn it |
| 23:23.53 | konoa | can anyone help me out? |
| 23:23.53 | *** join/#asterisk frade (n=frade@ip68-104-184-1.ph.ph.cox.net) |
| 23:24.07 | tainted- | X-Rob that is some really fast feature adding |
| 23:24.13 | X-Rob | tainted-, I rock. |
| 23:24.20 | X-Rob | konoa, use '.call' files. |
| 23:24.21 | tainted- | it's true |
| 23:24.51 | X-Rob | http://www.voip-info.org/wiki-Asterisk+auto-dial+out |
| 23:24.54 | konoa | x-rob: is that a "call queue" ? |
| 23:24.58 | mzo | must have been some secret pay-pals involved |
| 23:25.05 | X-Rob | konoa, no, read that voip-info link |
| 23:25.08 | konoa | x-rob: thanks for the link |
| 23:25.09 | *** join/#asterisk bloch (n=lol@c-67-170-7-94.hsd1.or.comcast.net) |
| 23:25.17 | tainted- | X-Rob what's 7/1 |
| 23:25.31 | X-Rob | tainted-, uh. A really small number? |
| 23:25.43 | X-Rob | Oh. No that would be 1/7. 7/1 is 7. |
| 23:25.58 | tainted- | that was magical |
| 23:26.35 | *** join/#asterisk kusznir (n=kusznir@pool-70-110-56-56.sttlwa.dsl-w.verizon.net) |
| 23:27.33 | kusznir | Is there a good asterisk web management app that can be installed relatively easily under debian? |
| 23:27.38 | znoG | you guys use ParkAndAnnounce to do what, exactly? |
| 23:28.03 | X-Rob | I don't. |
| 23:34.26 | *** join/#asterisk jeebusroxors (n=jeebus@29palms-cuda1-68-170-36-65.losaca.adelphia.net) |
| 23:35.44 | jeebusroxors | X-Rob; i removed everything recompiled and everythings working now - thanks alot for your help |
| 23:35.50 | X-Rob | np |
| 23:37.38 | *** join/#asterisk Qwell (n=north@unaffiliated/qwell) |
| 23:45.15 | Abydos313 | what distro do you guy recommend to run asterisk on? |
| 23:46.52 | znoG | pretty much any Linux distro should work |
| 23:47.11 | znoG | it'll work with Gentoo, Redhat, Fedora, Debian, it just depends what you like and are familiar with. |
| 23:47.17 | Abydos313 | ok |
| 23:47.20 | X-Rob | CentOS is 'recommended' |
| 23:47.30 | X-Rob | or it used to be anyway. I'm not sure if it still is. |
| 23:47.40 | Abydos313 | centos is kewl. we run oracle on it at work |
| 23:48.27 | Abydos313 | i like debian myself. quick question i get error 1 'no termcap' and make fails |
| 23:48.46 | Abydos313 | i isntalled term-compat.. same error |
| 23:51.07 | mzo | centos, the os so bad it's not worth a dirty filthy cent. |
| 23:51.26 | Abydos313 | runs fine for us |
| 23:52.01 | X-Rob | I run centos pretty much everywhere. |
| 23:52.22 | mzo | shh, i'm trolling :P |
| 23:52.29 | *** join/#asterisk RoyK (n=roy@10.80-203-106.nextgentel.com) |
| 23:52.35 | X-Rob | Going to have to roll out a new kenrel to all of them tho, sigh. |
| 23:53.30 | X-Rob | mzo, well, it is annoying. With #6399, what do you do? It's obviously a kernel bug, but I can't isoloate it. And the CentOS guys wouldn't want to. |
| 23:53.52 | X-Rob | and even if they did, and fixed the bug, it would no longer be binary compatible with RHEL, which would screw 'em up. |
| 23:54.14 | X-Rob | s/it would/they would/ |
| 23:54.39 | *** join/#asterisk sigmounte (n=sigmount@LSt-Amand-152-33-38-41.w82-127.abo.wanadoo.fr) |
| 23:54.49 | *** join/#asterisk mtgh (n=chatzill@dsl093-001-038.det1.dsl.speakeasy.net) |
| 23:55.03 | X-Rob | so you tell redhat. And they go 'you're not a customer, go away, peasant'. |
| 23:55.32 | dpryo | *cuddles debian* |
| 23:57.17 | X-Rob | Yes. You think that until you've got a machine 1800km away that's blown a hard drive and needs to be reinstalled. |
| 23:57.33 | X-Rob | hand a debian cd to lowest-common-denominator PC tech and see how far he goes. |
| 23:57.54 | X-Rob | (without spending 4 hours on the phone to him) |
| 23:58.06 | dpryo | Sorry, I am not familar with non-redundant hardware :) |
| 23:58.47 | X-Rob | dpryo, I've got 30 via eden machines around australia. |
| 23:58.51 | dpryo | lol |
| 23:59.03 | X-Rob | you really think they want to cough up for dual intel rackmount machines for each one? |
| 23:59.07 | X-Rob | I don't fucking think so. |
| 23:59.32 | X-Rob | s/intel/ibm/ |
| 23:59.50 | dpryo | I've got 80 rackmounted servers, and a few more at a remote location |