irclog2html for #asterisk on 20060517

`00:00.07`	`*** join/#asterisk Tili (n=Tili@cm33.gamma249.maxonline.com.sg)`
`00:00.12`	`generalhan`	`pjchilds: crap ... do you mind if i run a couple of things by you ?`
`00:01.07`	`delmar`	`pjchilds, when Asterisk is offline and the upstream cannot pass calls to it, the calls hit a generic voicemail box... hosted on the suppliers gear... I have on a couple of occasions when testing.. heard the chop on there too, but until i rule out everything at our end.. including timing, hardware, internet connection(jitter) ... im not going to get far`
`00:02.25`	`delmar`	`pjchilds, its that supplier that tells me not to use ztdummy... so they probably don't use it either... hence why I got chop on their voicemail :P`
`00:03.15`	`znoG`	`guys, I have my * box with a TDM2400 card (lots of FXS modules connected to a Lucent PBX). When the lucent PBX tries to dial through asterisk, Asterisk doesn't receive any caller ID info (NoOP(${CALLERID} returns blank). Do I have to enable something in zapata.conf to receive caller ID info?`
`00:05.21`	`pjchilds`	`delmar: from what I understand you only need ztdummy if you need a timing source... and you only need a timing source if you need to 'mix' audio streams (such as conferencing etc..)`
`00:05.35`	`*** join/#asterisk SplasPood (n=jwb@brooklyn.paravolve.net)`
`00:05.52`	`delmar`	`pjchilds, and for IAX2 trunking.. which is also not happening.. meetme/conference is required tho`
`00:05.54`	`file`	`the key word is need... timing isn't "needed" for file playback, but if it's available... it's used`
`00:06.07`	`pjchilds`	`znoG, I would be suprised if your lucent supported CLI on its analog station lines...`
`00:06.18`	`znoG`	`pjchilds: CLI?`
`00:06.30`	`znoG`	`pjchilds: yea, i figured it doesn't...`
`00:06.36`	`*** join/#asterisk dwclarkNU (n=dwclark@c-24-60-209-35.hsd1.ma.comcast.net)`
`00:06.37`	`delmar`	`pjchilds, comments i have read on the wiki say that you simply must use it if you want audio playback such as voicemail and IVR to play smoothly.. without chop... we are experiencing chop...`
`00:07.23`	`robl^`	`hrmmm.. I think I am gonna pick up some Aastra phones for my lab`
`00:07.47`	`file`	`it all comes down to the concept of, "how do you know when to send a frame of audio to a device?" well, you use a timer... be it a simple software based one that's used for scheduling (which may or may not be accurate sometimes depending on the system) or a zaptel timing source which should be reliable all the time, given it's setup correctly`
`00:07.52`	`websae`	`we have Aastra phones?`
`00:07.58`	`websae`	`*we have Aastra phones`
`00:08.04`	`websae`	`need some rob?`
`00:08.41`	`robl^`	`websae: I am thinking of picking up like 2 to 4 for testing.. see how well they work..`
`00:09.00`	`robl^`	`I heard they have good sound quality..`
`00:09.13`	`delmar`	`Oh someone in here was asking about issues with a TDM400.. making noises.. I was having the same problem... during a call via the FXO .. I could hear beeping noises at various volume levels.. very intermittantly... like standing in a supermarket check out line...this was running on a P5GD1-VM p4-775 deal... i replaced it with an older asus P4c800 motherboard... everything seems fine.`
`00:09.43`	`delmar`	`Just thought i would throw that out there in case anyone else comes accross issues with a p5gd1-vm ... i dont think they are all that compatible with digium hardware.. at least not the TDM400`
`00:12.29`	Lino`	`hmmm`
`00:12.31`	Lino`	`aastra`
`00:12.42`	Lino`	`isnt that the cheap version of nortel meridian phones?`
`00:13.02`	Lino`	`or does nortel sell the aastra stuff just with another label on it`
`00:13.07`	Lino`	`and a different price tag`
`00:19.04`	`robl^`	`I think Astra makes teh actual phones for Nortel..`
`00:19.29`	`generalhan`	`robl^: you are correct`
`00:19.55`	`generalhan`	`Aastra is the original name and they are starting to produce their OWN phones with their OWN namew`
`00:20.50`	`robl^`	`I thought Nortel hired Aastra to design the phones for the Merridian Option 11C and some of the centrex phones`
`00:25.00`	`*** join/#asterisk doughecka (n=Miranda@unaffiliated/doughecka)`
`00:26.52`	`*** join/#asterisk tuxinator_linux (n=tuxinato@netblock-68-183-112-86.dslextreme.com)`
`00:31.52`	`*** join/#asterisk chaoscon (n=ph33r@smartserv/ceo/chaoscon)`
`00:32.09`	`*** join/#asterisk Ixthod (n=mshields@198.174.206.41)`
`00:36.05`	`*** join/#asterisk marv (n=marv@12-219-145-181.client.mchsi.com)`
`00:36.19`	`*** join/#asterisk Ixthod (n=Ixthod@198.174.206.41)`
`00:37.29`	`*** part/#asterisk xai (n=pasta@about/networking/0.0.0.0/xai)`
`00:39.41`	`websae`	`a lot of people just signed off`
`00:39.44`	`websae`	`and just joined as well`
`00:39.53`	`file`	`no they didn't, you're imagining things`
`00:40.19`	`robl^`	`polyester-related hallucinations`
`00:40.27`	`file`	`no no, moon rays`
`00:40.38`	`websae`	`hahaha`
`00:40.44`	`tuxinator_linux`	`polyester hallucinations?`
`00:40.45`	`websae`	`thanks rob`
`00:41.27`	`Netgeeks`	`hey, anyone here have a voicemail function diagram (think of the old voicemail help sheets some PBX's had that you looked at to figure out where the option you were looking for was buried) for asterisk voicemail?`
`00:43.08`	`robl^`	`http://americablog.blogspot.com/attlistenx.jpg`
`00:43.09`	`tuxinator_linux`	`buried treasure, where?`
`00:51.14`	`*** part/#asterisk dwclarkNU (n=dwclark@c-24-60-209-35.hsd1.ma.comcast.net)`
`00:51.38`	`*** join/#asterisk bzbw (i=bwz@ip67-153-142-109.z142-153-67.customer.algx.net)`
`00:52.58`	`bzbw`	`hi, how do I set up intercom to using page to dial everyone including those extensions that may not be registered?`
`00:55.53`	`*** join/#asterisk yxa (n=diablo@58.185.90.101)`
`00:55.54`	`tuxinator_linux`	`stream, as apposed to local files?`
`00:56.03`	`Supaplex`	`local files`
`00:56.47`	`yxa`	`if i have a full E1, can i use half of the bandwdidth as data and the other half as voice?`
`00:56.57`	`tuxinator_linux`	`yes, have fun`
`00:57.36`	`yxa`	`tuxinator_linux is that for me?`
`00:57.39`	`tuxinator_linux`	`yes`
`00:57.48`	`tuxinator_linux`	`I hear it can be done`
`00:57.52`	`tuxinator_linux`	`but I have never done it`
`00:58.29`	`yxa`	`tuxinator_linux i guess i have to check with my incumbent`
`00:59.08`	`tuxinator_linux`	`yes, you can split the data out of the E1 stream using asterisk... I just hear it's a challenge`
`01:00.58`	`tuxinator_linux`	`Supaplex: I'd use local ogg files`
`01:01.12`	`tuxinator_linux`	`Supaplex: or better yet, RAW`
`01:02.03`	`Supaplex`	`ahh, yeah.`
`01:02.35`	`distortion`	`* + skype anyone? :)`
`01:02.48`	`*** join/#asterisk techie (n=gus@adsl-068-209-242-072.sip.mia.bellsouth.net)`
`01:05.24`	`Faithful`	`do you think it is better to run 2 separate switches?`
`01:08.28`	`tuxinator_linux`	`Faithful: you need to explain more`
`01:08.39`	`tuxinator_linux`	`Faithful: two switches for what?`
`01:10.42`	`delmar`	`pjchilds, u still around?`
`01:11.58`	`ad3`	`fresh Debian3.1r2 install, FXO, Sipura. when I try to start asterisk (built/installed zaptel, built/installed asterisk) I get ERROR[1446]: chan_zap.c:6878 mkintf: Unable to open channel 1: No such device or address`
`01:11.58`	`ad3`	`here = 0, tmp->channel = 1, channel = 1`
`01:12.40`	`ad3`	`my configs = http://pastebin.com/721653`
`01:13.34`	`*** join/#asterisk alephco1 (n=alephcom@host75.net14.mcsnet.ca)`
`01:14.33`	`*** join/#asterisk MacDome (n=eseidel@c-71-198-177-144.hsd1.ca.comcast.net)`
`01:15.32`	`*** join/#asterisk terrapen_ (n=cjs@mauritius.island.nu)`
`01:18.19`	`ad3`	`any ideas?`
`01:19.49`	`*** join/#asterisk wunderkin (i=kev@ip68-226-113-228.ph.ph.cox.net)`
`01:21.21`	`ad3`	`where can I check to fix, " Unable to open channel 1: No such device or address" when starting asterisk?`
`01:21.33`	`terrapen_`	`did you google`
`01:21.33`	`Faithful`	`a seperate switch just for telephony?`
`01:21.40`	`ad3`	`yes`
`01:21.46`	`Faithful`	`perhaps even on a different subnet`
`01:22.18`	`orlok`	`Faithful: vlans!`
`01:22.36`	`Faithful`	`orlok: managed switch`
`01:22.45`	`orlok`	`Faithful: yes, most managed switches do vlans`
`01:22.49`	`Faithful`	`simple install 4 phones`
`01:23.10`	`Faithful`	`$1K switch is a bit much`
`01:23.11`	`tuxinator_linux`	`don't even need vlans for 4 phones`
`01:23.15`	`tuxinator_linux`	`usually`
`01:23.28`	`tuxinator_linux`	`4 phones is low traffic`
`01:23.54`	`tuxinator_linux`	`and if your data network traffic is low also... you should be good`
`01:24.03`	`Faithful`	`just wondering to put them on different switch to avoid contention say someone is openning a large file on the fileserver over the same switch`
`01:24.04`	`tuxinator_linux`	`doesn't hurt to try first`
`01:24.21`	`tuxinator_linux`	`switch can handle it`
`01:24.36`	`tuxinator_linux`	`should be able to handle it`
`01:25.03`	`tuxinator_linux`	`does some frequently open large files`
`01:25.36`	`tainted_`	`i like to check on my server's page file and stuff`
`01:38.53`	`*** join/#asterisk bkw_ (n=brian@adsl-70-142-39-36.dsl.tul2ok.sbcglobal.net)`
`01:40.12`	`*** join/#asterisk Mw3_ (i=mw3@national.t-error.hu)`
`01:46.00`	`*** join/#asterisk juice (n=juice@mo-71-50-26-181.dhcp.sprint-hsd.net)`
`01:50.08`	`*** join/#asterisk d-tech (n=dtc@72.245.233.107)`
`01:50.16`	`*** join/#asterisk shido6 (n=shido6@d221-68-200.commercial.cgocable.net)`
`01:51.00`	`*** join/#asterisk lucasjb (n=lucas@mail.stabat.com)`
`01:54.46`	`*** join/#asterisk tuxinator_linuxM (n=tuxinato@netblock-68-183-112-22.dslextreme.com)`
`01:55.59`	`lucasjb`	`Hiyas, what would be the correct way to tell asterisk that I want no music on hold to be played to my agents? Can I say 'musiconhold =>'?`
`01:56.24`	`*** join/#asterisk evilbuny (n=evilbunn@203-206-241-232.dyn.iinet.net.au)`
`01:56.32`	`*** part/#asterisk evilbuny (n=evilbunn@203-206-241-232.dyn.iinet.net.au)`
`01:56.41`	`*** join/#asterisk paolob (n=donpaolo@pri-214-b7.codetel.net.do)`
`01:57.03`	`*** join/#asterisk Johnnie (n=jdlewis@pdpc/supporter/active/Johnnie)`
`01:57.26`	`paolob`	`Hi guys! How do I get a music on hold to the other telephone when I put the call on hold? thank you!`
`01:59.39`	`brettnem`	`hey anyone know how to resolve the DNS issue asterisk had in older versions?`
`02:00.00`	`brettnem`	`I'm having a DNS nightmare and I just need to get my asterisk server back on it's feet`
`02:04.08`	`delmar`	`What might be some possible causes, that would cause an increasing number of mpg123 processes, and one in particular, to cause massive system load. anyone have any comments or things I might look at?`
`02:04.36`	`orlok`	`people calling up to listen to your hold music maybe? :)`
`02:04.49`	`delmar`	`heh. nope.`
`02:04.56`	`lucasjb`	`delmar, I too have that problem, one particular mpg123 process consumes all my CPU`
`02:05.15`	`delmar`	`i just caught one process going nuts on the cpu so i killed it... hasnt popped up again, all is well but.. obviously something happened`
`02:05.31`	`delmar`	`lucasjb, right.. and u kill it .. and how long till it comes back?`
`02:05.36`	`*** join/#asterisk Shark_y (n=paoloc@host181-54.pool8288.interbusiness.it)`
`02:05.51`	`lucasjb`	`delmar, well I haven't tried killing it, I want music on hold...`
`02:06.10`	`delmar`	`lucasjb, if you stop Asterisk.. you will notice it stays running.. its not even being used by Asterisk`
`02:06.21`	`lucasjb`	`delmar, oh...`
`02:06.34`	`Shark_y`	`Hi, can I have a little help about freepbx, please?`
`02:06.46`	`delmar`	`lucasjb, i stopped Asterisk.. and that process.. and others were still there.. killed it.. and all the stale ones.. started Asterisk.. and 4 mpg123 processes are there.. killed Asterisk.. they are gone... started.. they are back again.. so all is well now`
`02:06.53`	`delmar`	`and system load is almost nothing`
`02:07.12`	`Shark_y`	`How can I generate a peer to connect a Iax Phone?`
`02:07.13`	`delmar`	`lucasjb, what version of mpg123 are u running?`
`02:07.22`	`lucasjb`	`delmar, Sadly my Asterisk server is in production, killing it is bad.`
`02:07.38`	`lucasjb`	`delmar, the version distributed with Asterisk 1.2`
`02:07.55`	`lucasjb`	`0.59r`
`02:07.58`	`*** join/#asterisk supjigatr (n=syslod@152.53.17.26)`
`02:08.00`	`delmar`	`lucasjb, if u kill that process that is loading the box i reckon your hold music will be fine`
`02:08.10`	`delmar`	`lucasjb, hrm. ok`
`02:08.11`	`lucasjb`	`delmar, OK, what the hell!`
`02:08.37`	`delmar`	`lucasjb, then test your hold music. how many mpg123 processes do u see? ps -ax \|grep mpg123`
`02:09.19`	`lucasjb`	`delmar, I've got 6 mpg processes, three are playing customer hold music, three are playing agent hold music`
`02:09.31`	`delmar`	`ok`
`02:09.39`	`delmar`	`lucasjb, at least u dont have lots and lots`
`02:09.53`	`delmar`	`lucasjb, this system seems to accumulate them.`
`02:10.00`	`delmar`	`another system i have... works mint`
`02:10.10`	`delmar`	`just starts up about 8 of them for some reason`
`02:10.10`	`delmar`	`lol`
`02:10.19`	`brettnem`	`so anyone know about the DNS issues with asterisk?`
`02:10.33`	`lucasjb`	`brettnem, I'm sure someone does, why don't you ask your question?`
`02:10.41`	`brettnem`	`lucasjb: I did.. above`
`02:10.48`	`brettnem`	`hey anyone know how to resolve the DNS issue asterisk had in older versions?`
`02:10.50`	`brettnem`	`I'm having a DNS nightmare and I just need to get my asterisk server back on it's feet`
`02:11.09`	`lucasjb`	`brettnem, yep I saw that, but what's the problem specifically?`
`02:11.15`	`brettnem`	`basicly the SIP channel is locked up`
`02:11.54`	`brettnem`	`any ideas?`
`02:12.26`	`lucasjb`	`Nope, I was just encouraging you to ask the question, I'm not really an Asterisk expert...`
`02:12.35`	`lucasjb`	`... but what does SIP channel lockups have to do with DNS?`
`02:13.13`	`brettnem`	`older asterisk versions did DNS lookups during the sip channel init.. it was a fixed bug`
`02:13.23`	`lucasjb`	`Oh I see...`
`02:13.39`	`brettnem`	`I've been running some older code (which is much more stable than today's version of asterisk) but this bug is a pain.`
`02:13.53`	`lucasjb`	`I've never really run a version prior to 1.2 so I haven't had to deal with that`
`02:18.54`	`supjigatr`	`Are there any sample dialplan setups for virtual setups?`
`02:19.05`	`brettnem`	`wow... a newbie.. cool`
`02:19.13`	`supjigatr`	`where?`
`02:19.56`	`*** join/#asterisk mjmac (n=mjmac@pdpc/supporter/active/mjmac)`
`02:20.23`	`*** join/#asterisk D13GU___ (n=diego@200.195.105.79)`
`02:20.24`	`lucasjb`	`supjigatr, you'll probably find some at voip-info.org`
`02:20.36`	`supjigatr`	`I've dug around.`
`02:20.43`	`D13GU___`	`hi all! where a download asterisk distro?`
`02:20.57`	`Qwell`	`D13GU___: astlinux is good`
`02:21.24`	`D13GU___`	`Qwell ok, well. i'm from brazil and i like to make a Voip provider ok`
`02:21.39`	`*** join/#asterisk r_evolution (n=revoluti@va-71-48-132-11.dhcp.sprint-hsd.net)`
`02:22.09`	`supjigatr`	`Does setting on hold music class affect only that channel or does it change it for all channels?`
`02:22.24`	`lucasjb`	`I want music on hold that plays silence, but if I make a [agentholdmusic] context containing directory => /var/lib/asterisk/emptyfolder, the agents instead hear the [default] hold music... how can I get silence?`
`02:22.24`	`Qwell`	`oh lord`
`02:22.54`	`r_evolution`	`you rang?`
`02:23.36`	`D13GU___`	`Qwell i can config Asterisk with Astlinux in web-based?`
`02:24.03`	`Qwell`	`oh lord`
`02:24.23`	`drray`	`music on old with dialtone as your music on hold`
`02:24.25`	`Faithful`	`is there a right way to adjust gain levels for a TDM?`
`02:24.29`	`r_evolution`	`qwll you keep calling me :)`
`02:27.28`	`*** join/#asterisk RF_MIA (n=markmia@24-55-227-232.miamfl.adelphia.net)`
`02:29.50`	`*** join/#asterisk subdolus (n=subby@subby.afraid.org)`
`02:31.02`	`D13GU___`	`Qwell i know others asterisk's distros?`
`02:31.30`	`Qwell`	`D13GU___: Honestly...If you need a web gui to configure asterisk...you SHOULD NOT become an ITSP`
`02:31.33`	`lucasjb`	`OK, to answer my own question, directory => /dev/null makes an moh context play nothing, yay!`
`02:31.41`	`Qwell`	`lucasjb: heh, nice`
`02:31.55`	`D13GU___`	`Qwell yes...`
`02:32.22`	`D13GU___`	`but you know? for ITSP? astlinux, is good?`
`02:32.41`	`Qwell`	`for an ITSP, you'd better know how to setup your own...`
`02:33.10`	`r_evolution`	`yikes.`
`02:33.11`	`D13GU___`	`asterisk package...`
`02:33.14`	`r_evolution`	`asterisk@home = ITSP!`
`02:33.16`	`r_evolution`	`:)`
`02:33.26`	`Qwell`	`D13GU___: no package. source`
`02:33.27`	`D13GU___`	`;)`
`02:33.34`	`D13GU___`	`yes.. tar.gz....`
`02:34.13`	`D13GU___`	`Qwell what disto base you use?`
`02:35.02`	`zwelch`	`my TDM card just arrived. i was excited up until the point that it lists excactly two compatible PCI 2.2 chipsets`
`02:36.02`	`zwelch`	`is the reasoning beyond my diminished enthusiam valid? I'm going to have to buy a new system to just to use this card?`
`02:37.10`	`r_evolution`	`ever feel like God is teasing you zwelch?`
`02:37.12`	`Qwell`	`zwelch: 2 that have been tested by Digium`
`02:37.16`	`Qwell`	`try it in your box`
`02:37.39`	`zwelch`	`well, i was just trying to figure out which box might be 2.2 compatible.... i can't immediatelly tell using lspci`
`02:37.45`	`zwelch`	`anyone got an idea about that?`
`02:37.56`	`zwelch`	`also, the manual definitely needs to be updated to reflect that ambiguity`
`02:38.03`	`Qwell`	`zwelch: Are you using a 486?`
`02:38.12`	`zwelch`	`heh`
`02:38.17`	`Qwell`	`Then chances are, it'll work :P`
`02:38.29`	`*** join/#asterisk MacDome (n=eseidel@c-71-198-177-144.hsd1.ca.comcast.net)`
`02:38.31`	`Qwell`	`2.2 has been around for quite some time. any reasonable box will have it`
`02:38.32`	`D13GU___`	`Qwell i remenber to see Centos with asterisk...`
`02:38.56`	`zwelch`	`Qwell: but the question now is: how do i know for sure, from the linux CLI?`
`02:39.05`	`Qwell`	`zwelch: You don't, I don't think`
`02:39.14`	`zwelch`	`there has to be a proc entry, or something that tells you`
`02:39.27`	`zwelch`	`i.e. if it has feature X, it must be PCI 2.2`
`02:39.33`	`zwelch`	`what is feature X? :)`
`02:39.38`	`Qwell`	`god me`
`02:39.40`	`Qwell`	`got too`
`02:40.59`	`Qwell`	`What's a quick way to find out the bitrate of an mp3?`
`02:43.02`	`zwelch`	`Qwell: id3info?`
`02:43.27`	`zwelch`	`now help me answer my question :)`
`02:43.28`	`Qwell`	`zwelch: yeah..`
`02:43.32`	`zwelch`	`hehehe`
`02:49.37`	`delmar`	`lucasjb, hey are u still around?`
`02:50.38`	`delmar`	`lucasjb, i just got rid of mpg123 completly. hold music still works great.. now only using the format_mp3 thing from the asterisk-addons. so.. you dont even need mpg123 for Asterisk... I wonder what the pro's/cons are using mpg123 vs format_mp3 with asterisk.`
`02:51.20`	`brettnem`	`mpg123 sucks`
`02:51.26`	`delmar`	`brettnem, yep. so i see`
`02:51.45`	`brettnem`	`I don't know about format_mp3`
`02:51.45`	`delmar`	`bastard spawns processes ALL over the place.. and they spin out and hog spu`
`02:51.48`	`delmar`	`cpu*`
`02:51.53`	`brettnem`	`yep`
`02:51.54`	`delmar`	`i just set that up`
`02:51.57`	`delmar`	`and it works great so far`
`02:52.13`	`brettnem`	`I tried native ulaw wavs for moh and I can't get the volume low enough, it's really loud!`
`02:53.05`	`*** part/#asterisk techie (n=gus@adsl-068-209-242-072.sip.mia.bellsouth.net)`
`02:58.40`	`*** join/#asterisk gcarrillog (n=gcarrill@201.152.19.192)`
`03:00.32`	`zwelch`	`Qwell: [ 16.396611] PCI: PCI BIOS revision 2.10 entry at 0xfb530, last bus=1`
`03:00.39`	`zwelch`	`is that telling me my PCI version?`
`03:00.45`	`Qwell`	`no, don't think so`
`03:00.59`	`Qwell`	`Just try the damn thing :P`
`03:01.19`	`zwelch`	`no. i have a reputation to consider.... one that involves a murky past of smoking hardware :)`
`03:01.31`	`*** join/#asterisk juanjoc (n=juanjoc@248-32-235-201.fibertel.com.ar)`
`03:02.03`	`zwelch`	`unless you're a digium authorized digium rep, you're asking me to do something that might void my warranty ;-p`
`03:02.17`	`*** join/#asterisk camelon (n=chiardon@206.106.255.85)`
`03:02.28`	`camelon`	`Night`
`03:02.40`	`Qwell`	`zwelch: If it would damage the card or the system, the slots would be different`
`03:02.49`	`Qwell`	`(ala 5v vs 3.3v)`
`03:03.05`	`zwelch`	`heh, i suppose that's true :) engineers have learned since the good old days ;)`
`03:04.00`	`zwelch`	`"hmmm.... you mean we should use polarized connections for polarlized power feeds? awww, but it's so much fun when someone gets it backwards...."`
`03:05.25`	`*** join/#asterisk mrbnet_ (n=sureal@CPE-72-135-45-43.mn.res.rr.com)`
`03:07.05`	`*** join/#asterisk santiago (n=santiago@debian/developer/santiago)`
`03:08.11`	`*** join/#asterisk stkn (n=foobar@gentoo/developer/pdpc.active.stkn)`
`03:08.34`	`*** join/#asterisk Mavvie (n=edwin@203.222.131.252)`
`03:09.14`	`*** join/#asterisk Nugget (i=nugget@dazed.slacker.com)`
`03:09.17`	`*** part/#asterisk Shark_y (n=paoloc@host181-54.pool8288.interbusiness.it)`
`03:09.43`	`gcarrillog`	`hi`
`03:10.26`	`gcarrillog`	`i have asterisk on FreeBSD`
`03:10.42`	`gcarrillog`	`i dont know where are the configuration files`
`03:10.58`	`gcarrillog`	`/etc/asterisk doesnt exist`
`03:11.43`	`RF_MIA`	`I believe there is some good FreeBSD info on the voip wiki`
`03:11.46`	`zwelch`	`i don't run freebsd, but they are probably in /usr/share/asterisk/examples or something like that, and you have to copy them wholesale yourself`
`03:11.56`	`zwelch`	`but yeah, RTFW ;)`
`03:12.04`	`gcarrillog`	`lol`
`03:12.05`	`gcarrillog`	`:P`
`03:12.08`	`zwelch`	`heheh`
`03:12.08`	`gcarrillog`	`oks`
`03:12.13`	`alephco1`	`They are in "/usr/local/etc/asterisk" I believe`
`03:12.33`	`zwelch`	`gcarrillog: that was an abbreviation for Read the FreeBSD Wiki... what's the problem ;D`
`03:12.34`	`*** part/#asterisk santiago (n=santiago@debian/developer/santiago)`
`03:12.38`	`gcarrillog`	`what is the best OS for asterisk?`
`03:13.01`	`zwelch`	`gcarrillog: the one that you get it working on :)`
`03:13.14`	`gcarrillog`	`:)`
`03:13.14`	`supjigatr`	`No best but I use slackware`
`03:13.16`	`gcarrillog`	`oks`
`03:13.23`	`zwelch`	`i use gentoo`
`03:13.35`	`supjigatr`	`astlinux is the easy way.`
`03:13.45`	`zwelch`	`but you're essentially asking, "which editor is the best to use for changing asterisk's configuration files?" :)`
`03:13.45`	`gcarrillog`	`mmmmmm and centos?`
`03:13.53`	`gcarrillog`	`jajajajaja`
`03:13.57`	`gcarrillog`	`oks`
`03:14.27`	`gcarrillog`	`thanks /usr/local/etc//usr/local/etc/asterisk <<<<its true`
`03:15.26`	`*** join/#asterisk alephco1 (n=alephcom@host75.net14.mcsnet.ca)`
`03:15.56`	`blitzrage`	`anyone know of some video conferencing software? looking for something free (its just for fun), runs on windows -- too bad asterisk doesn't do it :D`
`03:16.13`	`supjigatr`	`We use XTEN and openser.`
`03:16.20`	`supjigatr`	`not free but close.`
`03:16.32`	`blitzrage`	`yah... unfortuantely its just for a few buddied`
`03:16.38`	`blitzrage`	`buddies*`
`03:16.50`	`camelon`	`blitzrage . . Cuseeme I think`
`03:17.23`	`blitzrage`	`camelon: thanks`
`03:17.29`	`zwelch`	`blitzrage: minisip does/did mesh conferencing, though I'm not sure if it does what you want`
`03:17.35`	`supjigatr`	`I think there are linux ones that are free. Openser will do signaling.`
`03:18.10`	`zwelch`	`blitzrage: the does/did ambiguity stems from the fact that i haven't tested it, and little bit of bit rot has probably occurred`
`03:18.27`	`camelon`	`but windows net meeting?`
`03:18.37`	`blitzrage`	`gotcha... yah, too bad vid conferencing is so complex :)`
`03:18.45`	`blitzrage`	`does netmeeting do multiple cams?`
`03:18.59`	`zwelch`	`blitzrage: join the minisip project and help us make it easier ;)`
`03:19.16`	`blitzrage`	`I'm not sure where I can help there :)`
`03:19.41`	`zwelch`	`s/other/either/`
`03:20.36`	`zwelch`	`blitzrage: at the moment, you'd be helpful if you got your buddies trying out minisip for mesh conferencing and coordinitating the inevitable bug reports`
`03:20.56`	`blitzrage`	`gotcha... yah -- just want to do 3 voice/vid :)`
`03:21.01`	`blitzrage`	`page isn't loading though`
`03:21.09`	`blitzrage`	`linux only?`
`03:21.16`	`zwelch`	`ah, right... their university pipe keeps going up and down (since sunday)`
`03:21.28`	`zwelch`	`no, it's windows too`
`03:21.30`	`zwelch`	`and wince`
`03:21.38`	`blitzrage`	`oh really? any link?`
`03:21.39`	`zwelch`	`and i'm probably going to start a macosx port next month`
`03:21.44`	`zwelch`	`minisip.org is it`
`03:21.53`	`blitzrage`	`darn`
`03:21.54`	`zwelch`	`wait an hour for their network engineers to fix it :/`
`03:22.07`	`zwelch`	`however, i think it's early am in sweden; they are probably doing upgrades`
`03:22.13`	`pjchilds`	`blitzrage, why don't you use skype ... the conferencing in that works with video...`
`03:22.36`	`blitzrage`	`pjchilds: damnit... you're going to make me use skype?`
`03:23.00`	`zwelch`	`pjchilds: ;)`
`03:23.01`	`pjchilds`	`whoops... i thought you wanted something that worked on windows...`
`03:23.09`	`zwelch`	`minisip works on windows too`
`03:23.12`	`zwelch`	`;)`
`03:23.32`	`zwelch`	`but there are probably other open source solutions too ;0`
`03:23.32`	`pjchilds`	`and windows is closed source -- so you wouldn't be a anti-closed-source dude using windows...`
`03:23.39`	`blitzrage`	`pjchilds: I do -- I didn't know it did vid conf`
`03:24.21`	`zwelch`	`pjchilds: no, i'm not anti-closed source; i am anti-closed-source-when-excellent-free-and-open-solutions-are-available`
`03:24.23`	`pjchilds`	`blitzrage, oh yeah... its even out of beta I think... used it to talk to the wife/kids when working away...`
`03:24.50`	`blitzrage`	`nice`
`03:24.58`	`blitzrage`	`pjchilds: but I mean more than 2 cams`
`03:27.12`	`pjchilds`	`blitzrage, i'm pretty sure it does...`
`03:27.18`	`blitzrage`	`neat!`
`03:28.12`	`pjchilds`	`if there was a peer-2-peer distributed location finding voice-and-video over ip client with nat traversal, http tunnelling, dynamic codec adjustment etc.... well... that would be nice :)`
`03:32.03`	`Nugget`	`I'm sure the NSA's got it and they're using it right now to listen to you.`
`03:32.06`	`camelon`	`someone with big experience in the setup of *Box with . . . 2E1s (one of them ISDN (ADSL)) . . . wct4xxp . . . 2 CBs ant lot of POTS and 2 ATAs?`
`03:36.55`	`camelon`	please! don`t answer like a turmoil . .hehehehehe
`03:37.18`	`RF_MIA`	`2E1 PRI with ADSL?`
`03:37.35`	`blitzrage`	`hmmmm... can't seeem to find the 3 way button`
`03:38.09`	`camelon`	`RF_MIA . . .one of them . . the other optic fiber`
`03:38.48`	`RF_MIA`	`one is an E1 data line then?`
`03:39.23`	`RF_MIA`	`one questions do you have>?`
`03:39.44`	`pjchilds`	`blitzrage, get v2 or later of skype - select two (or more buddies) and right client 'invite to conference..' (i think?)`
`03:39.52`	`camelon`	`RF_MIA . . . nooop . . both for voice`
`03:40.00`	`blitzrage`	`pjchilds: yah, found that part of it`
`03:40.27`	`camelon`	`RF_MIA . . .*Box too unestable`
`03:40.47`	`RF_MIA`	`single quad E1 card?`
`03:41.13`	`camelon`	`frecuents downs . . .chsnel de interrupts . . . extensions drops or inactivity or busy message`
`03:41.43`	`camelon`	`RFMIA . . .TE4xxp`
`03:42.01`	`RF_MIA`	`what output do u see in Asterisk? D-channel slips or anything similar?`
`03:43.38`	`camelon`	`D-chennel issues but no exactly slips . . . no watchdod doing the dirty job . . but many times throough the day`
`03:44.26`	`camelon`	`RF_MIA . . .now . . watchdog doing the dirty job`
`03:44.34`	`*** join/#asterisk ikey (i=ikey@220.226.17.197)`
`03:44.37`	`RF_MIA`	`is your card on its own interrupt?`
`03:44.44`	`camelon`	`yepppppp`
`03:45.00`	`ikey`	`Hi does asterisk support T38?`
`03:45.06`	`RF_MIA`	`zap show status...what does that show?`
`03:45.13`	`Qwell`	`ikey: only passthrough, for now`
`03:45.14`	`docelm0`	`no not t38 until 1.4`
`03:45.16`	`RF_MIA`	`bipolar violations ?`
`03:45.19`	`camelon`	`i checked frecuently and all is OK`
`03:45.21`	`docelm0`	`Qwell not even pass thru..`
`03:45.24`	`Qwell`	`ikey: There are patches going into trunk (or already there?)`
`03:45.26`	`docelm0`	`I tried that..`
`03:45.28`	`Qwell`	`docelm0: sdp passthrough`
`03:46.23`	`camelon`	`RF_MIA . .how to detect bipolar violations?`
`03:46.39`	`RF_MIA`	`they are indicated in >zap show status`
`03:46.44`	`RF_MIA`	`or using zttool`
`03:47.04`	`ikey`	`Qwell: for this we need to install Spandsp`
`03:47.23`	`camelon`	`RF_MIA . . .with wich type of message?`
`03:47.51`	`camelon`	`RF_MIA . . never zttool detect something bad`
`03:47.52`	`RF_MIA`	`it will say something like 'bp vilotains' with a number`
`03:48.11`	`RF_MIA`	`what country? do u use R2?`
`03:48.31`	`camelon`	`RF_MIA . .i donte remeber to have seen something like that . .but not totally sure`
`03:49.28`	`RF_MIA`	`camelon...do u have any runaway processes?`
`03:49.29`	`camelon`	`RF_MIA . .not using R2 . . .and all the problem looks to come from the ADSL not from te optical E1`
`03:50.03`	`RF_MIA`	`the ADSL is an E1 PRI with 30+1 channels?`
`03:50.32`	`camelon`	`RF_MIA . . yeeeeppppppp`
`03:50.44`	`RF_MIA`	`interesting`
`03:50.57`	`camelon`	`hehehehe . .why?`
`03:50.59`	`RF_MIA`	`never heard of that....`
`03:51.35`	`*** join/#asterisk bmg505 (n=leon@c1-3-2.rndf.isadsl.co.za)`
`03:52.17`	`camelon`	`RF_MIA. . .but from your experience it could comes from . . ?`
`03:52.33`	`camelon`	`RF_MIA were to begin the checklist?`
`03:52.53`	`RF_MIA`	`start low level...cables, csu/dsu from telco, etc.`
`03:53.05`	`RF_MIA`	`try a different port on your E1 card`
`03:53.27`	`*** join/#asterisk MstlyHrmls (n=mh@melbourne.mostly-harmless.ca)`
`03:53.28`	`camelon`	`RF_MIA . . .which country are you living?`
`03:53.35`	`RF_MIA`	`US`
`03:53.39`	`Freman`	`Application command TXTCIDNAME - any... more complete documentation? like what the zone should look like, or how to make it look up with a different zone?`
`03:54.11`	`RF_MIA`	`but I have customer in Latin America and Europe where we use E1`
`03:54.38`	`camelon`	`I'm in south america`
`03:55.11`	`camelon`	`RF_MIA . . .csu/dsu= framing and coding or something else?`
`03:55.53`	`*** join/#asterisk websae (n=websae@h69-129-251-26.69-129.unk.tds.net)`
`03:55.55`	`camelon`	`FR_MIA . . .what's your area business`
`03:56.08`	`RF_MIA`	`area? territory?`
`03:56.24`	`camelon`	`noooop . .sorry . . business`
`03:56.31`	`*** join/#asterisk RevSlowmo (n=slowmo@adsl-66-218-36-163.dslextreme.com)`
`03:56.35`	`RF_MIA`	`we make h/w for asterisk`
`03:56.42`	`*** join/#asterisk elvisthedj (n=kris@host-69-145-70-130.bln-mt.client.bresnan.net)`
`03:56.50`	`RF_MIA`	`t1/e1 hardware`
`03:57.24`	`camelon`	`RF_MIA . . .like CBs?`
`03:57.35`	`elvisthedj`	`Hi all.. I just switched from head to 1.2 release and see that I don't have the RAND function.. Is there an equivelant in 1.2?? or do i need to use an agi script to generate a random number?`
`03:57.49`	`RevSlowmo`	`How could I make asterisk only pickup on a dialplan if X amount of rings were detected?`
`03:57.59`	`RF_MIA`	`we make a t1/e1 bridge for Asterisk`
`03:59.06`	`RevSlowmo`	`Or only ans if the line is still ringing?`
`03:59.13`	`websae`	`RF_MIA: what product is it called?`
`03:59.39`	`RF_MIA`	`fonebridge...redfone fonebridge`
`03:59.43`	`*** join/#asterisk qai (i=qai@216.154.22.3)`
`03:59.48`	`elvisthedj`	`RevSlowmo: have you tried setting the delay after the Answer app?`
`04:00.18`	`elvisthedj`	`Answer(10000) (answer after 10 seconds.. how ever many rings that is)`
`04:00.19`	`websae`	`that's what i thought ;)`
`04:00.30`	`RF_MIA`	`:)`
`04:00.52`	`Qwell`	`elvisthedj: about 2`
`04:01.13`	`RevSlowmo`	`I was doing Wait,7 then Answer on its own...`
`04:01.32`	`Freman`	`TXTCIDNAME doesn't appear to work... at least not with AEL`
`04:01.49`	`Freman`	`MEH=${TXTCIDNAME($NUMBER})};`
`04:02.06`	`elvisthedj`	`Qwell: ty :p`
`04:02.27`	`Qwell`	`eh?`
`04:02.36`	`elvisthedj`	`so, in the stable 1.2, there's no way to generate a random number?`
`04:03.15`	`elvisthedj`	`Qwell: that was a thanks`
`04:03.16`	`Qwell`	`elvisthedj: no function RAND?`
`04:03.20`	`Qwell`	`no, not you...`
`04:03.29`	`qai`	`Question: I can't get call waiting to wait. It will transfer the incoming call to v-mail. Any sugestions? My extensions_custom_conf uses Dial(295/local from-internal,45,mtT) - 45 second wait`
`04:03.31`	`elvisthedj`	`Qwell: Right.. it's in head, but not in 1.2`
`04:04.00`	`elvisthedj`	`May 16 21:56:49 ERROR[11660]: pbx.c:1382 ast_func_read: Function RAND not registered`
`04:04.10`	`Qwell`	`1) Why are you using t and T?`
`04:04.17`	`qai`	`transfer capability`
`04:04.23`	`Qwell`	`2) wtf...that syntax is...wtf?`
`04:04.25`	`blitzrage`	`Freman: ${NUMBER}`
`04:04.27`	`blitzrage`	`not $NUMBER`
`04:04.33`	`*** join/#asterisk hypa7ia (i=hypatia@judecca.aculei.net)`
`04:04.40`	`blitzrage`	`hypa7ia: hoi!`
`04:04.48`	`Qwell`	`qai: tT is BAD together..`
`04:04.57`	`hypa7ia`	`hihi blitzrage`
`04:04.58`	`Qwell`	`means I can transfer myself to a 900 number`
`04:05.00`	`hypa7ia`	`how goes`
`04:05.02`	`Qwell`	`on your dime`
`04:05.11`	`blitzrage`	`yay`
`04:05.42`	`Qwell`	`3) What is in the from-internal context, at exten 395?`
`04:05.47`	`Qwell`	`295 that is`
`04:05.49`	`[TK]D-Fender\|AFK`	`Qwell : Depends on the context of the other channel....`
`04:05.59`	`qai`	`It is just an extension`
`04:06.01`	`Freman`	`blitzrage: that's what I have... my copy and paste method is poor (c: 'MEH=${TXTCIDNAME(${NUMBER})};' <- is it (sans ') it's just on a seperate machine`
`04:06.10`	`Qwell`	`qai: yes, what extension?`
`04:06.31`	`[TK]D-Fender\|AFK`	`Qwell : And the oly reason to use it is if you are sharing a common dial section for interal extensions between phones and IVR.`
`04:06.33`	`Qwell`	`Freman: Do you understand how TXTCIDNAME works?`
`04:06.34`	`elvisthedj`	`ok.. i'm going to assume that if i need a four digit random number, i gotta use an agi to get it`
`04:06.41`	`[TK]D-Fender\|AFK`	`Qwell : Which just sucks anyways`
`04:06.45`	`qai`	`a regular phone.. in the kitchen`
`04:06.49`	`Freman`	`says Syntax error, unexpected #end, expecting TOK_MINUS or TOK_COMPL or TOK_LP or TOKEN; Input:`
`04:06.53`	`Qwell`	`qai: Show me the syntax`
`04:07.07`	`Qwell`	`Freman: Show us the whole line`
`04:07.23`	`Freman`	`Qwell: Nope, as I can't find real documentation for it, I was hoping to try it and work it`
`04:07.26`	`Freman`	`that is the whole line`
`04:07.33`	`Freman`	`or the error line?`
`04:07.34`	`Qwell`	`no it isn't`
`04:07.40`	`Qwell`	`The entire line from extensions.conf`
`04:07.58`	`RevSlowmo`	`elvisthedj: Just for info it is a fxo card, x100p, It picks up no matter what, I want it to act like a ans machine and only pick up if its still not offhook in x amount of rings of secs.`
`04:08.05`	`Freman`	`MEH=${TXTCIDNAME(${NUMBER})};`
`04:08.11`	`Freman`	`that is the entire line from extensions.ael`
`04:08.16`	`Qwell`	`Freman: better`
`04:08.26`	`Qwell`	`Do you not need Set() in ael?`
`04:08.28`	`[TK]D-Fender\|AFK`	`RevSlowmo : well what are you doing in yuor incoming context?`
`04:08.33`	`Freman`	`nope`
`04:08.37`	`*** join/#asterisk jaike (n=a@203.131.137.76)`
`04:08.47`	`Qwell`	`positive? Does MEH=blah work?`
`04:09.10`	`qai`	`exten => 199,n,Dial(local/295@from-internal,45,mtTwW)`
`04:09.21`	`Freman`	`NUMBER=${CALLERID(number)}; works`
`04:09.24`	`RevSlowmo`	`wait,answer,digittimeout,background,waitexten`
`04:09.36`	`[TK]D-Fender\|AFK`	`RevSlowmo : pastebin it`
`04:09.37`	`[TK]D-Fender\|AFK`	`~pb`
`04:09.43`	`jbot`	`extra, extra, read all about it, pb is a place to paste your stuff without flooding the channel - try http://pastebin.com/, or http://pastebin.ca`
`04:11.05`	`RevSlowmo`	`http://pastebin.com/721834`
`04:11.06`	`jaike`	`anyone know how to disable recording when using AgentMonitorOutgoing? we just need the c option to change CDR source to agent ID`
`04:11.24`	`jaike`	`recordagentcalls=no in agents.conf doesnt work`
`04:12.33`	`[TK]D-Fender\|AFK`	`RevSlowmo : And it still picks up almost immediately?`
`04:13.07`	`*** join/#asterisk syle (n=blah@unaffiliated/syle)`
`04:13.30`	`RevSlowmo`	`[TK]D-Fender\|AFK: Not that it picks up immediatly but if I pickup the phone first is still picks up, but does nothing but lower the overall volume on the line at the set wait time.`
`04:13.38`	`*** join/#asterisk eidolon (n=eido@pdpc/supporter/monthlybronze/eidolon)`
`04:13.48`	`eidolon`	`hi folks, anyone familiar with Twinklephone?`
`04:13.59`	`eidolon`	`aka just 'twinkle'? Linux VOIP softphone.`
`04:14.02`	`[TK]D-Fender\|AFK`	`RevSlowmo : If you pick up fast enough * should stop seeing it ring and give up.`
`04:15.28`	`RevSlowmo`	`[TK]D-Fender\|AFK: So thats not good then..... But it acts funny when it still does pickup it doesnt seem to go past the Answer part it just sits their.`
`04:15.50`	`qai`	`Qwell - is that info from from-internal what you were looking for - pretty straight forward stuff - I think something must be missing`
`04:16.09`	`blitzrage`	`can I connect skype to asterisk?`
`04:16.20`	`Qwell`	`blitzrage: omg nub!`
`04:16.24`	`RevSlowmo`	`[TK]D-Fender\|AFK: I am using fxsks on the channel, does that matter.`
`04:16.34`	`blitzrage`	`why doesn't asterisk support video conferencing?`
`04:16.45`	`Qwell`	`blitzrage: doesn't it?`
`04:17.00`	`Qwell`	`I thought file and russellb did some stuff to it?`
`04:17.03`	`qai`	`sure would be nice eh blitzrage - seeing that they are offering free skypout till end of 2006 to US and CAN`
`04:17.25`	`blitzrage`	`qai: I'm not sure what that has to do with video conferencing :)`
`04:18.05`	`qai`	`it has to do with your q regarding skype to asterisk - from a purely voice respective`
`04:18.20`	`blitzrage`	`oh -- I already get free phoen calls :)`
`04:18.53`	`Qwell`	`anybody worth calling, has a sip address :p`
`04:19.12`	`blitzrage`	`heh -- I just decided to run an ITSP -- who the hell is going to charge me for calls :)`
`04:20.21`	`qai`	`excuse my blantent ignorance - but what is an ITSP`
`04:20.46`	`blitzrage`	`~itsp`
`04:20.48`	`jbot`	`rumour has it, itsp is Internet Telephony Service Provider. An ITSP is a "VoIP Phone Company"`
`04:21.21`	`[TK]D-Fender\|AFK`	`RevSlowmo : Make sure to set faxdetect to "no"`
`04:21.43`	`qai`	`oh - that ITSP`
`04:21.50`	`RevSlowmo`	`[TK]D-Fender\|AFK: Is the in the zaptel.conf`
`04:22.00`	`[TK]D-Fender\|AFK`	`RevSlowmo : yup`
`04:22.07`	`qai`	`~mestupid - rumour has it that mestupid is true`
`04:22.08`	`jbot`	`qai: that's too long`
`04:22.17`	`qai`	`see`
`04:22.23`	`*** join/#asterisk redondos_ (n=redondos@190.48.57.66)`
`04:23.01`	`jaike`	`guess will have to tinker with chan_agent.c`
`04:24.07`	`*** join/#asterisk SkramX (n=mark@admins.sentiensystems.net)`
`04:24.21`	`SkramX`	`i cant hear anything from my sccp-phone, however asterisk receives data`
`04:31.55`	`qai`	`Seeing that there is a lull.. anyone with suggestions how I can get call waiting to wait! - it just transfers the incoming call to v-mail if the extension is busy`
`04:32.34`	`[TK]D-Fender\|AFK`	`qai : Depends on your phone.`
`04:33.04`	`Qwell`	`qai: If you aren't going to give me what I asked...`
`04:33.08`	`Qwell`	`how can I possibly help?`
`04:33.31`	`qai`	`I gave you the exten info - isn't that what you asked for?`
`04:33.36`	`qai`	`exten => 199,n,Dial(local/295@from-internal,45,mtTwW)`
`04:33.43`	`Qwell`	`That isn't 295`
`04:33.48`	`Qwell`	`what does 295 look like?`
`04:34.07`	`Qwell`	`pastebin it`
`04:34.16`	`qai`	`one sec`
`04:34.32`	`[TK]D-Fender\|AFK`	`Qwell : You KNOW what that is from the context name, don't you?`
`04:34.45`	`jaike`	`qai: you can do a Wait loop on exten 295`
`04:34.52`	`[TK]D-Fender\|AFK`	`Qwell : Screams the "A" word...`
`04:34.55`	`Qwell`	`[TK]D-Fender\|AFK: No, if it's a simple Hangup()...`
`04:35.03`	`Qwell`	`obviously it isn't going to work`
`04:35.13`	`*** join/#asterisk PBXtech (i=nik@23.sub-70-213-182.myvzw.com)`
`04:35.18`	`Qwell`	`So unless we know exactly what it's doing...how can we possibly diagnose?`
`04:35.29`	`RevSlowmo`	`[TK]D-Fender\|AFK: http://pastebin.com/721844`
`04:35.35`	`*** join/#asterisk bjohnson (n=bjohnson@i216-58-58-202.cybersurf.com)`
`04:35.35`	`RevSlowmo`	`[TK]D-Fender\|AFK: It seems to be off`
`04:37.00`	`[TK]D-Fender\|AFK`	`RevSlowmo : Can you pastebin the real thing please`
`04:37.51`	`qai`	`Qwell - I don't have exten info for 295. (That I can find). Incoming calls are routed to 199 where I do some preprocessing before handing off to 295`
`04:37.57`	`*** join/#asterisk CunningPike (n=arodgers@S010600095b33697f.vc.shawcable.net)`
`04:38.11`	`Qwell`	`So, what does 295...DO?`
`04:38.33`	`[TK]D-Fender\|AFK`	`qai : How is it you don't have infor for an exten on your own system?`
`04:38.42`	`RevSlowmo`	`[TK]D-Fender\|AFK: Oh the config, well I couldnt faxdetect=no to work in the config but it says it defaults to no.`
`04:39.10`	`[TK]D-Fender\|AFK`	`RevSlowmo : Can you still pastebin it in case there is another option in there that interferes....`
`04:39.19`	`RevSlowmo`	`sure`
`04:40.01`	`[TK]D-Fender\|AFK`	`RevSlowmo : Don't think so hard! People are always convinced they only have to show some tiny bit from a means of their choice. Peer review requires VISIBILITY.`
`04:40.33`	`RevSlowmo`	`[TK]D-Fender\|AFK: Heh, I was adding that to zaptel.conf not zapata.conf`
`04:40.50`	`[TK]D-Fender\|AFK`	`RevSlowmo : I helped a guy today who didn't realise he spelled a SIP realm wrong on his peer and thats why calls were failing. Little shit happens.`
`04:41.18`	`[TK]D-Fender\|AFK`	`RevSlowmo : Fxdetect stuff doesn't go in Zaptel..... thats a zapata`
`04:41.54`	`[TK]D-Fender\|AFK`	`ok, hurry up people I've got about 5 more minutes of consciousness left in me....`
`04:42.32`	`qai`	`ok - in the local context I have three lines:`
`04:42.36`	`qai`	`exten => 295,1,Macro(exten-vm,295,295)`
`04:42.51`	`qai`	`exten => ${VM_PREFIX}295,1,Macro(vm,295)`
`04:43.00`	`qai`	`exten => 295,hint,SIP/295`
`04:43.03`	`Qwell`	`firstly, that second line doesn't work`
`04:43.05`	`[TK]D-Fender\|AFK`	`Qwell : Yup, AMP`
`04:43.27`	`[TK]D-Fender\|AFK`	`Qwell : Sure it does...`
`04:43.31`	`Qwell`	`secondly...now what is in exten-vm?`
`04:43.41`	`[TK]D-Fender\|AFK`	`Qwell : AMP`
`04:43.41`	`Qwell`	`[TK]D-Fender\|AFK: You sure? vars are runtime`
`04:43.54`	`Freman`	`damnit gentoo maintainer didn't include res_perl in 1.2.7`
`04:43.55`	`[TK]D-Fender\|AFK`	`Qwell: thats not a var, its a diaplan constant.`
`04:44.17`	`RevSlowmo`	`[TK]D-Fender\|AFK: home.earthlink.net/~blumel/zapata.conf`
`04:44.17`	`Qwell`	`regardless...`
`04:44.19`	`Qwell`	`#freepbx`
`04:44.20`	`[TK]D-Fender\|AFK`	`Qwell : thats exacty where its defined`
`04:44.34`	`Qwell`	`~amp`
`04:44.35`	`jbot`	`amp is, like, "amp is, like, NOT supported here! people using it should join #freepbx (the new name of amp)"`
`04:44.46`	`Qwell`	`umm`
`04:44.50`	`Qwell`	`who butchered that?`
`04:44.55`	`blitzrage`	`gnomes`
`04:45.04`	`RevSlowmo`	`[TK]D-Fender\|AFK: Id pb it but I cant for the love of god copy the file into the clipboard.... dang vim cant find the cmd`
`04:45.19`	`Qwell`	`jbot: amp is NOT supported here! People using it should join #freepbx (FreePBX is the new name of AMP)`
`04:45.20`	`jbot`	`...but amp is already something else...`
`04:45.27`	`Qwell`	`jbot: no, amp is NOT supported here! People using it should join #freepbx (FreePBX is the new name of AMP)`
`04:45.29`	`jbot`	`okay, Qwell`
`04:45.32`	`Qwell`	`~amp`
`04:45.33`	`jbot`	`amp is, like, NOT supported here! People using it should join #freepbx (FreePBX is the new name of AMP)`
`04:47.30`	`qai`	`Rats - gotta march off to freepbx.. just when I was starting to feel the love`
`04:47.46`	`Qwell`	`freepbx is the CAUSE of your problem`
`04:48.31`	`[TK]D-Fender\|AFK`	`RevSlowmo : You have 2 contexts defined in your zapata... its a mess`
`04:49.04`	`[TK]D-Fender\|AFK`	`1 line refers to [default] the other to [incoming] (which I don't see in your other PB)`
`04:49.40`	`qai`	`jaike mentioned using a wait loop. Do you think that I could loop back to the same exten line a few times?`
`04:50.04`	`Qwell`	`qai: #freepbx`
`04:50.13`	`qai`	`ok omg..`
`04:50.33`	`[TK]D-Fender\|AFK`	`qai : Immediately drop any thought or manipulating basic call-flow in AMP. When using a cookie-cutter config, expect to get CUT.`
`04:51.30`	`zwelch`	`will it be okay to connect my FXO port behind my DSL line? i can't imagine there would be a problem, but others probably have such a card with DSL and know what actually works`
`04:51.33`	`qai`	`thanks for all the help.. its great that you guys are here as often as you are to help.`
`04:51.39`	`zwelch`	`s/line/modem/`
`04:51.45`	`*** part/#asterisk qai (i=qai@216.154.22.3)`
`04:52.16`	`[TK]D-Fender\|AFK`	`zwelch : extremely rarely can pose problems, just filter it first`
`04:52.20`	`CunningPike`	`zwelch: Your correction`
`04:52.47`	`zwelch`	`CunningPike: holy nifty feature, batman!`
`04:52.49`	`[TK]D-Fender\|AFK`	`zwelch : Don't put the closing "/" and it won't regurjitate :)`
`04:53.12`	`CunningPike`	`It's a good bot`
`04:53.20`	`CunningPike`	`You're a good bot, jbot`
`04:53.54`	`zwelch`	`anyway, the modem has a built-in filter on the pass through port`
`04:54.00`	`zwelch`	`so that's why i think it's cool`
`04:54.12`	`[TK]D-Fender\|AFK`	`zwelch : what card?`
`04:54.17`	`zwelch`	`TDM4xx`
`04:54.28`	`zwelch`	`it's an 11, dev kit model`
`04:54.29`	`*** join/#asterisk firestrm (n=no@S01060013105c1c69.gv.shawcable.net)`
`04:54.33`	`[TK]D-Fender\|AFK`	`zwelch : TDM doesn't filter anything....`
`04:54.53`	`[TK]D-Fender\|AFK`	`zwelch : you still need to put an ADSL filter in front ofit.`
`04:54.53`	`*** part/#asterisk RF_MIA (n=markmia@24-55-227-232.miamfl.adelphia.net)`
`04:54.58`	`zwelch`	`no, i meant my Cisco 675 DSL modem has a built-in filter on its pass through port`
`04:55.10`	`zwelch`	`i want to plug the TDM4xx into that pass through, which is filtered`
`04:55.15`	`[TK]D-Fender\|AFK`	`zwelch : AH, that makes more sense.`
`04:55.18`	`zwelch`	`right then :)`
`04:55.46`	`[TK]D-Fender\|AFK`	`I'm so glad to be POTS free :)`
`04:56.45`	`firestrm`	`telus the pots king of canada :)`
`04:57.03`	`[TK]D-Fender\|AFK`	`firestrm : Bell begs to differ....`
`04:57.29`	`firestrm`	`lol.. but are the as pure evil as telus is?`
`04:58.11`	`[TK]D-Fender\|AFK`	`almost... telus is small enough they SHOULDN'T treat you as craps as they do. Bell can more than afford to supremely not give a shit :)`
`04:58.42`	`[TK]D-Fender\|AFK`	`Just a question of nearly irreleven scale :)`
`04:59.03`	`firestrm`	`telus just recentyly pulled a fast one on alot of outdial terminators, blocked access to the telus phone network..`
`04:59.17`	`[TK]D-Fender\|AFK`	`eek`
`04:59.44`	`firestrm`	`cant dial 250,403 or 306 (which is wierd becuse thats sasktel)`
`04:59.57`	`[TK]D-Fender\|AFK`	`Holy crap, yeah... thats news.`
`05:00.35`	`[TK]D-Fender\|AFK`	`Ok well I'm fried.... checkout time for me.`
`05:00.37`	`[TK]D-Fender\|AFK`	`later all`
`05:00.52`	`firestrm`	`its been going on for a few weeks now.. their excuse is that voip providers cant comply with e911 so their blocking all but a few select ones..`
`05:01.08`	`firestrm`	`l8tr`
`05:01.19`	`Freman`	`Where's the best place to go for the asterisk manual... I've been using voip-info but it's such a mix of old and new atm`
`05:02.03`	`blitzrage`	`~thebook`
`05:02.04`	`jbot`	`[thebook] somebody said thebook was Asterisk: The Future of Telephony, released under a Creative Commons license and available at http://www.asteriskdocs.org << Meet Jim Van Meggelen at Cluecon http://www.cluecon.com`
`05:02.23`	`[TK]D-Fender\|AFK`	`blitzrage : ! ! !`
`05:02.23`	`firestrm`	`thanks blitzrage, you beat me to it :)`
`05:02.24`	`[TK]D-Fender\|AFK`	`I don't want to stay awake!`
`05:02.30`	`blitzrage`	`[TK]D-Fender\|AFK: who goes?`
`05:02.37`	`[TK]D-Fender\|AFK`	`ME :)`
`05:02.37`	`blitzrage`	`who does? -- and the answer is... me`
`05:02.37`	`Freman`	`tah`
`05:02.54`	`[TK]D-Fender\|AFK`	`hehe, ciao peeps.`
`05:04.25`	`firestrm`	`so who out there is REALLY good i mean business quality good as in if any problem they will kiss your a$$ and get it fixed right now, high quality audio good, outdial terminator for IAX ?`
`05:05.16`	`firestrm`	`dont care much about $$ as long as.. 1 PAYG and 2 somewhat reasonable but dont have to be the cheapest..`
`05:06.34`	`firestrm`	`anyone?? suggestions.. ive discovered that while suxtel may be resonable quality audio and $$$.. service.. what service.. klingon service manager..`
`05:06.58`	`zwelch`	`speaking of IAX, I'm guessing that I won't have problems with trunking between internal and external * servers, with a symetric nat in between them; again, it would be nice to hear that others have done or are doing this`
`05:07.57`	`firestrm`	`zwelch, ive tried it... jidder was a bit of a problem for some reason i couldnt figure out..`
`05:08.52`	`*** join/#asterisk ghost99 (n=neville@222-153-92-225.jetstream.xtra.co.nz)`
`05:08.55`	`zwelch`	`hmmm, i bet some tuning of something could fix it, but the question of what to tune might be rather challenging to answer`
`05:09.49`	`firestrm`	`exactly.. what i wound up doing was using 2 rv016's and setting up a tunnel between the two sites instead..`
`05:10.09`	`zwelch`	`at the very least, i imagine this will force me to upgrade my firewall to something more modern than its 266MHz StrongARM 110 :)`
`05:10.48`	`firestrm`	`lol... ya you might find you bandwidth improves.. that cant be good for more than maybe 2mbps..`
`05:10.52`	`Qwell`	`266mhz...pfft`
`05:11.03`	`Qwell`	`It's all about 110 mhz sparcstations :P`
`05:11.16`	`zwelch`	`the upstream port is only 1Mb/s, which is still slower than my DSL connection :/`
`05:11.23`	`zwelch`	`s/slower/faster`
`05:11.32`	`firestrm`	`Qwell, lol.. my mailserver runs off of a 333 sparc ultra`
`05:12.15`	`firestrm`	`its amazing what some of that old hardware will keep up with..`
`05:12.19`	`zwelch`	`however, i have started to need to move large data files between my internal and external networks, so this will be the final straw`
`05:12.20`	`Qwell`	`ugh`
`05:12.26`	`Qwell`	`my ss5 has a 10k rpm scsi drive...`
`05:12.30`	`Qwell`	`slower than ata100, heh`
`05:12.38`	`Qwell`	`by a whole factor`
`05:12.48`	`Sedorox`	`ultra scsi? :p`
`05:12.54`	`Qwell`	`something`
`05:12.54`	`zwelch`	`firestrm: yeah... i'll repurpose my firewall as a backup dns and mail server, and it'll last as long as its hard drive does`
`05:13.09`	`firestrm`	`zwelch, smoothwall?`
`05:13.10`	`Qwell`	`It's a good HD`
`05:13.24`	`zwelch`	`firestrm: run on ARM? :)`
`05:13.39`	`firestrm`	`hmm.. now that would be a cool ort..`
`05:13.43`	`firestrm`	`er port..`
`05:13.45`	`Sedorox`	`lol`
`05:14.07`	`Sedorox`	`my router/firewall.. will be a 1.2 Celery with 3 nics.. and 256 ram.. lol`
`05:14.26`	`*** join/#asterisk Altair256 (n=Altair25@mail.clccorp.com)`
`05:15.05`	`firestrm`	`Sedorox, i found that by the time i bought the hardware and set up the software it was cheaper and easier to go with a hardware solution..`
`05:15.32`	`firestrm`	`im mostly happy with my rv016's and rv080's`
`05:15.40`	`firestrm`	`some issures..`
`05:16.59`	`firestrm`	`the nice feature is built in ssl tunnels.. so i can set up secure voip networks without the while firewall/nat problems`
`05:19.06`	`firestrm`	`well gotta go.. must continue the iax outdial provider investigation..`
`05:19.18`	`Sedorox`	`hehe`
`05:19.38`	`Sedorox`	`dunno.. mine terminates fomr bgp peers and stuff too`
`05:20.23`	`firestrm`	`bgp?`
`05:21.05`	`Sedorox`	`boarder gateway protocol...`
`05:21.24`	`Sedorox`	`connect to other people.. share network prefixes..`
`05:22.24`	`Sedorox`	`like SS7 in telcom.. but for data networks :p`
`05:22.33`	`firestrm`	`ok.. im catching up :) that works too.. but i like the encrypted factor.. keeps mr shrub out of my phone converstations..`
`05:22.35`	`Sedorox`	`(from what I understand of ss7 anyway)`
`05:22.42`	`Sedorox`	`hehe yea`
`05:23.36`	`Sedorox`	`anyway.. off to bed..`
`05:23.37`	`Sedorox`	`night`
`05:23.49`	`firestrm`	`me too.. gnite..`
`05:25.35`	`Freman`	`hmm ok... I can't get res_perl working with asterisk 1.2.7 - more reason for me to not upgrade to it )c:`
`05:25.35`	`zwelch`	`blitzrage: minisip.org is back up`
`05:25.53`	`*** join/#asterisk x86 (n=x86@p3m/member/x86)`
`05:26.37`	`*** join/#asterisk scardinal (n=supreme@port816.ds1-suoe.adsl.cybercity.dk)`
`05:28.46`	`*** join/#asterisk Shoragan (n=shoragan@d072.apm.etc.tu-bs.de)`
`05:36.42`	`Mavvie`	`hmm... silly "services" on the Cisco phones don't send a hostname in the HTTP request.`
`05:37.10`	`Mavvie`	`despite that they're saying they do HTTP/1.1`
`05:37.29`	`Mavvie`	`oh wait, they do, but do it as IP address:`
`05:37.34`	`Mavvie`	`Host: 202.83.176.80:80`
`05:37.36`	`Mavvie`	`geez...`
`05:40.50`	`Corydon76-home`	`Doesn't that defeat the purpose of setting a Host parameter?`
`05:41.55`	`Mavvie`	`yes`
`05:41.56`	`Mavvie`	`double yes`
`05:43.05`	`Mavvie`	`http://weblog.barnet.com.au/edwin/000094.html <- that's a different one.`
`05:43.22`	`Mavvie`	`but as dumb.`
`05:46.33`	`*** join/#asterisk tuxd00d (n=tuxinato@netblock-68-183-112-22.dslextreme.com)`
`05:47.16`	`*** join/#asterisk oej (n=oej@apollo.webway.se)`
`05:54.18`	`Freman`	`I don't think I trust ael...`
`05:56.08`	`*** join/#asterisk Mw3 (i=mw3@national.t-error.hu)`
`06:00.32`	`Corydon76-home`	`It's a computer program... trust has nothing to do with it`
`06:01.22`	`Corydon76-home`	`What's more, after you load an ael configuration, you're welcome to type 'show dialplan' to confirm it does what you wanted it to do`
`06:01.53`	`Corydon76-home`	`Its accuracy is perfectly verifiable`
`06:02.22`	`*** join/#asterisk lately (n=doug@ppp167-252-31.static.internode.on.net)`
`06:02.44`	`*** part/#asterisk lately (n=doug@ppp167-252-31.static.internode.on.net)`
`06:03.09`	`Freman`	`yeh... docs say I can use VAR=${Somethig} but this has only worked for callerid(number) everything else I've had to put Set()`
`06:10.52`	`Freman`	`asteriskbook is out of date`
`06:10.58`	`websae`	`hahaha`
`06:11.05`	`websae`	`that's why there is the wiki`
`06:11.11`	`dlynes_home`	`that's the understatement of the year`
`06:11.16`	`websae`	`~wiki`
`06:11.26`	`dlynes_home`	`wiki's a lot better, but it's still out of date in a lot of cases, too`
`06:11.43`	`websae`	`a lot of it is updated though as well`
`06:11.50`	`dlynes_home`	`~docs`
`06:11.51`	`jbot`	`[docs] probably Documentation can be found at http://www.digium.com/index.php?menu=documentation or http://www.digium.com/handbook-draft.pdf or http://www.voip-info.org/wiki-Asterisk or http://www.asteriskdocs.org or http://www.oreilly.com/catalog/asterisk or http://www.asteriskguru.com, or http://www.astmasters.net/howtos.html`
`06:12.02`	`*** join/#asterisk lately (n=doug@ppp167-252-31.static.internode.on.net)`
`06:12.26`	`Freman`	`ok, I'll steal them`
`06:13.06`	`dlynes_home`	`Freman: there's also astrecipes.net or .org...can't remember which`
`06:13.23`	`dlynes_home`	`It's a whole bunch of configuration file recipes for asterisk`
`06:13.45`	`Freman`	`hehe, good - I'll be needing that (c:`
`06:15.05`	`SkramX`	`~Skram`
`06:15.06`	`jbot`	`[skram] bored`
`06:23.24`	`*** join/#asterisk TonyM (n=TonyM@softins.claranet.co.uk)`
`06:23.37`	`*** join/#asterisk satlan32 (n=pargit@212.150.142.211)`
`06:24.27`	`*** join/#asterisk kmilitzer (n=km@office-gw.westend.com)`
`06:25.05`	`*** join/#asterisk [Airwolf] (n=airwolf@83.98.235.219)`
`06:25.15`	`*** join/#asterisk rkr245 (n=ravi@office.callsat-telecom.com)`
`06:34.16`	`*** join/#asterisk FalconJT (n=chatzill@dsl-202-72-133-72.wa.westnet.com.au)`
`06:34.39`	`FalconJT`	`hello`
`06:35.27`	`FalconJT`	`I've spent a while searching the net for a reason why I hear static noise using a TDM400 wildcard with FXO modules to dial out on the analogue network from an IP phone`
`06:35.38`	`FalconJT`	`Haven't had much luck so I thought I would ask here`
`06:36.55`	`zwelch`	`FalconJT: what about the other direction? PSTN->IP?`
`06:37.42`	`*** join/#asterisk tuxd00d (n=tuxinato@netblock-68-183-112-22.dslextreme.com)`
`06:38.04`	`zwelch`	`FalconJT: i mean, presumably you have other use cases where there is no static?`
`06:38.46`	`zwelch`	`i just got my TDM400 and will be trying out my FXO module for that purpose soon, so i am interested to know :)`
`06:40.59`	`zwelch`	`(and presumably you know, for example, that you don't have a bad analog line... ;) these are smart questions to ask, even if they sound a bit pedantic)`
`06:42.10`	`FalconJT`	`zwelch: Thanks for the response! Yes the noise is the same no matter which direction the call is made. It is not overpowering. The conversation is still fine but the noice is a little annoying compared to a normal phone call.`
`06:42.39`	`FalconJT`	`zwelch: hmmm testing out the analogue line by itself - now that is an idea I haven't done`
`06:42.43`	`zwelch`	`heh`
`06:50.57`	`*** join/#asterisk tzafrir (n=tzafrir@local.xorcom.com)`
`06:52.23`	`*** join/#asterisk [Airwolf] (n=airwolf@83.98.235.219)`
`06:54.02`	`*** join/#asterisk lorinc (n=ang@caracas-2709.adsl.interware.hu)`
`07:06.41`	`*** join/#asterisk qdk (n=qdk@213.237.44.34)`
`07:09.08`	`*** join/#asterisk MacDome (n=eseidel@c-71-198-177-144.hsd1.ca.comcast.net)`
`07:09.54`	`*** join/#asterisk MacDome (n=eseidel@c-71-198-177-144.hsd1.ca.comcast.net)`
`07:11.28`	`*** part/#asterisk fourcheeze (n=rich@westbury.doilywood.org.uk)`
`07:16.06`	`*** join/#asterisk tparcina (n=tparcina@wr-lama.iskon.hr)`
`07:16.19`	`tparcina`	`good morning everybody!`
`07:17.15`	`*** join/#asterisk mrtwister\|mobile (n=andrius@cable-10-68.cgates.lt)`
`07:19.17`	`tparcina`	`i wonder has anybody made it`
`07:19.32`	`*** join/#asterisk nagl (n=nagl@rih.zid-nw.wu-wien.ac.at)`
`07:19.38`	`dlynes_home`	`made waht?`
`07:19.41`	`dlynes_home`	`made asterisk yawn?`
`07:19.42`	`tparcina`	`I need to lock the phone so that nobody, without account code, can't call out`
`07:20.03`	`dlynes_home`	`tparcina: Authenticate()`
`07:20.42`	`tparcina`	`yes, but If i need to make 100 phone calls per day, it would be weary dificult to dial 100 pins more`
`07:20.45`	`dlynes_home`	`tparcina: you can also supply a filename to it, so that you can match multiple authentication codes`
`07:21.05`	`tparcina`	`I need something that will onlock the phone until is, with same pass, locked again`
`07:21.45`	`dlynes_home`	`tparcina: just do either a dialplan script using gotoif's and/or extensions, or using agi`
`07:22.06`	`tparcina`	`how will I do it with dialplan?`
`07:22.21`	`tparcina`	`how will I know is the phone locked or not?`
`07:22.42`	`dlynes_home`	`tparcina: Check for presence of a variable; if the variable isn't set, prompt for an authentication code`
`07:22.54`	`*** join/#asterisk BugKham (n=lamer@202.8.86.163)`
`07:23.07`	`x86`	`anyone doing ENUM lookups in their dialplans?`
`07:23.08`	`litage`	`hey guys, just a quick question posted: http://rafb.net/paste/results/M7X5za11.html`
`07:23.08`	`tparcina`	`is there any example on internet?`
`07:23.17`	`dlynes_home`	`tparcina: if the user dials lock, relock the dialplan`
`07:23.24`	`dlynes_home`	`tparcina: probably not`
`07:23.36`	`Qwell`	`good use of astdb`
`07:24.00`	`tparcina`	`qwell, you are suggesting that to me`
`07:24.03`	`Qwell`	`yes`
`07:24.11`	`Qwell`	`as the "variable" he mentioned`
`07:24.32`	`dlynes_home`	`well...variable or astdb`
`07:24.37`	`dlynes_home`	`astdb would probably be better`
`07:24.42`	`dlynes_home`	`but either will work`
`07:24.47`	`tparcina`	`I need to make it work in my head, than I hope I'll be able to do it in asterisk :))`
`07:25.03`	`x86`	`anyone doing ENUM lookups in their dialplans? i want to test my E164.org numbers from outside of my server`
`07:25.10`	`dlynes_home`	`tparcina: draw it out as a flowchart`
`07:25.50`	`tparcina`	`qwell, dlynes, I'll talk with you in a moment, yust to think it out how to make it work - then I'll ask for your suggestions`
`07:25.51`	`BugKham`	`anyone has an idea how many concurrent calls can asterisk support on a P4 CPU with 512MB DDR RAM?`
`07:26.04`	`BugKham`	`it's P4 2.8 GHz`
`07:26.11`	`x86`	`a few ;)`
`07:26.17`	`Qwell`	`BugKham: exactly 2`
`07:26.17`	`MGSsancho`	`more than 4`
`07:26.25`	`MGSsancho`	`lol`
`07:26.33`	`x86`	`BugKham: probably around 60 or so, depending on which codec you use`
`07:26.35`	`Qwell`	`impossible to answer`
`07:26.45`	`x86`	`BugKham: the less compresion the more calls you can handle, generally ;)`
`07:26.48`	`BugKham`	`QWell: huh`
`07:26.54`	`x86`	`BugKham: assuming your bandwidth doesnt become the bottleneck`
`07:27.06`	`dlynes_home`	`BugKham: the more passthrough you're doing, the more calls you can handle`
`07:27.47`	`x86`	`the more translation you're doing, the less calls you can handle`
`07:27.57`	`BugKham`	`x86: i'm using a mixture of gsm+g711u`
`07:28.19`	`dlynes_home`	`BugKham: check the performance area of the asterisk wiki on voip-info`
`07:28.29`	`dlynes_home`	`BugKham: it'll give a few examples from other users`
`07:28.38`	`x86`	`dlynes_home: you do enum lookups to e164.org?`
`07:28.50`	`dlynes_home`	`x86: nope`
`07:29.00`	`BugKham`	`I'm starting a small calling card system has generally around 10-15 calls at a time it's running quite OK`
`07:29.19`	`dlynes_home`	`x86: i'm not even sure what the purpose is`
`07:29.21`	`MGSsancho`	`>_>`
`07:29.28`	`BugKham`	`dlynes_home: thanks`
`07:29.33`	`x86`	`dlynes_home: to cut out the PSTN between two switches ;)`
`07:29.36`	`dlynes_home`	`x86: I don't currently have a need to do it, or i probably would have taken a look at it by now :0`
`07:30.02`	`dlynes_home`	`x86: ah`
`07:30.49`	`flynux`	`you can also store a dialplan in a dns subzone with e.164`
`07:30.56`	`flynux`	`but the syntax is a little mad...`
`07:31.02`	`x86`	`dlynes_home: you dial a regular e164-formatted number, lookup a NAPTR DNS record for it, and if it exists it will give you a SIP URI, which you can call outright without forwarding the call to the PSTN`
`07:31.46`	`dlynes_home`	`x86: is there a master naptr dns table?`
`07:31.50`	`BugKham`	`x86: if I run ser on the same sever as asterisk, should it help?`
`07:32.33`	`x86`	`dlynes_home: there are a few different ones... e164.info, e164.arpa, and e164.org are the most popular`
`07:33.08`	`dlynes_home`	`x86: ah...and don't the people hosting those phone numbers charge anything to access their phone numbers?`
`07:33.22`	`x86`	`they dont host anything but DNS`
`07:33.24`	`x86`	`lol`
`07:33.36`	`*** join/#asterisk littleball (n=littleba@26.203-123-30.leased.qala.com.sg)`
`07:33.38`	`dlynes_home`	`no...i mean the hosts that those sip uri's point to`
`07:33.38`	`x86`	`e164.org and e164.info don't charge at all`
`07:33.51`	`x86`	`eh, the SIP URI is the other switch ;)`
`07:33.56`	`dlynes_home`	`exactly`
`07:34.05`	`dlynes_home`	`don't they charge you to terminate on their switch?`
`07:34.16`	`x86`	`if it's one of their extensions, why would they?`
`07:34.44`	`dlynes_home`	`shurg cause you're generating more bandwidth? :)`
`07:34.46`	`littleball`	`hello, i try to name the SIP phone number, any standards there? example, i have mobile no. 12345678, i try to set the number for my sip phone which corresponding to my mobile no.`
`07:35.17`	`dlynes_home`	`x86: but yeah, i see where you're going`
`07:35.22`	`dlynes_home`	`x86: sounds like a good idea`
`07:35.35`	`x86`	`the whole point is i list my DIDs on a public DNS database like e164.org, you list your DIDs on e164.org also... I place a call to one of your DIDs, it looks it up in the database, and instead of routing the call out to the PSTN, it routes directly to your switch via SIP, IAX2, or H323`
`07:35.43`	`dlynes_home`	`x86: are you able to update the e164 entries if you move servers around?`
`07:35.49`	`x86`	`sure`
`07:36.20`	`dlynes_home`	`ah...and the e164 entry describes whether the termination point is using h323, iax2, sip, or mgcp?`
`07:36.34`	`x86`	`yup`
`07:36.42`	`dlynes_home`	`cool`
`07:36.57`	`dlynes_home`	`might reduce some minute charges :0`
`07:37.24`	`x86`	`and you can store other stuff too... like white pages info... website url... email address... icq numbers... etc`
`07:37.26`	`dlynes_home`	`and maybe even reduce some load on my pri, once we get bigger`
`07:37.48`	`dlynes_home`	`x86: ah...cool`
`07:38.38`	`dlynes_home`	`so it's easy enough to add and remove dids i take it?`
`07:38.52`	`x86`	`oh yeah`
`07:39.05`	`*** join/#asterisk jaike (n=a@203.131.137.76)`
`07:39.05`	`dlynes_home`	`hrm`
`07:39.35`	`dlynes_home`	`Need to write some tools to generate extensions, e164 entries, ...`
`07:39.39`	`*** join/#asterisk zoa (n=kkk@pirus.securax.be)`
`07:39.59`	`dlynes_home`	`And also automatically create entries in my billing database`
`07:42.11`	`*** join/#asterisk pif (n=ldm@zenon.apartia.fr)`
`07:47.19`	`*** join/#asterisk UlbabraB (n=caplaz@host241-43.pool8172.interbusiness.it)`
`08:08.21`	`*** join/#asterisk VxJasonxV (n=jason@unaffiliated/VxJasonxV)`
`08:11.23`	`*** join/#asterisk zzxxcc (n=zzxxcc@221.232.9.61)`
`08:15.15`	`*** join/#asterisk jeffgus (n=jeffgus@alpha.zimage.com)`
`08:17.14`	`*** join/#asterisk Frogzoo (n=Frogzoo@202.155.165.25)`
`08:17.26`	`tparcina`	`Dlynes, Qwell, please check this page http://www.voip-info.org/wiki/view/Locking+phones I belive this is how I should done it`
`08:17.37`	`tparcina`	`now, going to make it work :))`
`08:28.28`	`*** join/#asterisk RoyK (n=roy@10.80-203-106.nextgentel.com)`
`08:31.50`	`RoyK`	`<PROTECTED>`
`08:37.07`	`*** part/#asterisk jaike (n=a@203.131.137.76)`
`08:38.20`	`*** join/#asterisk pfn (n=pfnguyen@netblock-66-245-252-239.dslextreme.com)`
`08:40.51`	`boddy`	`Hi all I saw in configuration that in digium.com bchan=1-23 dchan=24 why it used 24 channel`
`08:41.02`	`boddy`	`for PRI`
`08:41.09`	`boddy`	`pr� has 30 channel ?`
`08:41.21`	`x86`	`PRI has 23 B channels and 1 D channel`
`08:41.30`	`x86`	`D channel does signalling`
`08:41.39`	`boddy`	`pri=t1`
`08:41.45`	`zoa`	`pri can be e1 too`
`08:41.45`	`boddy`	`?`
`08:41.49`	`zoa`	`and than it has 30`
`08:42.24`	`x86`	`boddy: T1 is 24 64kbps channels`
`08:42.58`	`x86`	`boddy: PRI usually runs over a T1, uses 23 of those channels as B channels, and the 24th channel as the D channel for signalling`
`08:43.19`	`boddy`	`I have digium te110p`
`08:43.35`	`boddy`	`can I use 30 channel`
`08:44.03`	`x86`	`not with a T1 you cant`
`08:44.25`	`zzxxcc`	`T1 is used in North America`
`08:44.27`	`*** join/#asterisk Assid (n=assid@203.115.83.214)`
`08:44.28`	`Assid`	`heya`
`08:44.37`	`x86`	`not sure about an E1 or J1, as I'm not in Europe or Japan, and don't have access to either ;)`
`08:44.38`	`zzxxcc`	`E1 is used in Europe and many other countries`
`08:44.44`	`boddy`	`I am in turkey`
`08:44.44`	`nextime`	`boddy : pri is channelized T1 in USA, but, if i can understand correctly, you are in turkey, so, you have pri over E1, so, you have 31 channels, 30 B channel and 1 D channel`
`08:44.49`	`Assid`	`anyone tried that callerid agi ? i cant seem to work it`
`08:44.50`	`Assid`	`http://nerdvittles.com/index.php?p=82`
`08:45.27`	`nextime`	`so, you have 1-15,17-31 bchan and 16 dchan`
`08:45.41`	`RoyK`	`nextime: 32 channels, 0 for sync and (usually) 16 for the dchan :P`
`08:45.54`	`zoa`	`http://www.asteriskguru.com/tutorials/e1t1.html`
`08:46.06`	`RoyK`	`zoa: hi`
`08:46.08`	`zoa`	`hey ho`
`08:46.30`	`nextime`	`RoyK : true, but not usefull for configuration purpose :)`
`08:46.37`	`RoyK`	`nextime: :)`
`08:46.50`	`zoa`	`nextime: look at those tutorials, they should help a little`
`08:46.58`	`zoa`	`i spent ages writing those things`
`08:47.04`	`zoa`	`and they still contain lotsa bugs`
`08:47.21`	`nextime`	`zoa : i've no problem with my PRI, it was a boddy's problem`
`08:47.22`	`RoyK`	`I sent you an email the other day. we're still having serious problems with the sipjb, and we really want them fixed. right now we've disabled the whole jb -- not usable`
`08:47.44`	`*** join/#asterisk sternn (n=sternn@user-0c938ku.cable.mindspring.com)`
`08:48.19`	`tparcina`	`question: can I set up accountcode for sip user? in iax.conf I can define accountcode=something, does the same work for sip?`
`08:48.32`	`RoyK`	`yes`
`08:49.05`	`tparcina`	`royK, yes to me, or yes to somebody else?`
`08:49.49`	`qdk`	`tparcina: must be everyone with that broadcast.`
`08:50.02`	`zoa`	`roy, i will need help finding it`
`08:50.15`	`tparcina`	`qdk, sorry, don't understand you`
`08:50.16`	`zoa`	`we do not find those timestamp warnings here`
`08:50.24`	`zoa`	`im using the sip jb in production`
`08:50.26`	`zoa`	`sip to zap`
`08:50.34`	`zoa`	`and dont see such a warnings`
`08:50.37`	`qdk`	`tparcina: ok, not important then. ;-)`
`08:50.53`	`tparcina`	`come on, tell me`
`08:51.49`	`tparcina`	`it seams I'm a litle slow this morning - you made a joke...`
`08:51.51`	`zoa`	`we need to find where those warnings come from`
`08:51.56`	`zoa`	`to fix them`
`08:52.44`	`*** join/#asterisk teapot (n=tandrews@mail.grok.org.za)`
`08:52.58`	`teapot`	`hi`
`08:53.00`	`*** join/#asterisk chapeaurouge (n=chapeaur@vilhost1.vision.lu)`
`08:53.00`	`*** join/#asterisk [Airwolf] (n=airwolf@83.98.235.219)`
`08:55.10`	`teapot`	`spot the bug:`
`08:55.11`	`teapot`	`if ((wc->mod[x].fxs.lasttxhook == 0x2) \|\| (wc->mod[x].fxs.lasttxhook = 0x6)) {`
`08:55.22`	`zoa`	`im using it in production on 2 callcenters and one itsp now, without any such warnings`
`08:56.07`	`teapot`	`that line is from wctdm.c`
`08:56.08`	`litage`	`are there any problems with running multiple TDM400 cards in a single physical box?`
`08:57.29`	`Assid`	`litage: shouldnt.. unless your having an irq conflict`
`08:57.37`	`litage`	`thanks Assid`
`08:57.43`	`boddy`	`nextime:what is the mean I am in turkey or in usa I jusct configure connection`
`08:57.48`	`many`	`teapot: youre missing one =`
`08:57.56`	`teapot`	`not me many`
`08:58.05`	`teapot`	`but yes, it is missing one '='`
`08:58.07`	`many`	`teapot: with appropriate compilerflags the compiler will moan at that, though.`
`08:58.14`	`teapot`	`indeed`
`08:58.26`	`teapot`	`I suppose I should submit a patch eh? ;)`
`08:58.41`	`Assid`	`can anyuone try this agi please.. i cant seem to get it to work: http://nerdvittles.com/index.php?p=82`
`08:58.46`	`many`	`no. create a bug "stupid coders."`
`08:58.58`	`teapot`	`actually the compiler doesn't moan because it's enclosed in brackets`
`08:59.03`	`many`	`if you submit a patch you will have to sign that stupid agreement`
`08:59.20`	`boddy`	`I am planing to use ccs framing and hdb3 coding`
`08:59.24`	`teapot`	`many: I've already signed that long ago :)`
`08:59.39`	`many`	`teapot: well, st^H^Hyou are nice ;)`
`08:59.41`	`Assid`	`zoa: you free for a sec?`
`08:59.41`	`teapot`	`and that "stupid coder" is probably mark :p`
`08:59.57`	`*** join/#asterisk jahani (n=k@adsl196-236-224-217-196.adsl196-16.iam.net.ma)`
`09:00.02`	`many`	`teapot: okay. i stop here. dont need to make more enemies than i have already. :P`
`09:00.09`	`teapot`	`heh`
`09:00.29`	`teapot`	`not mark anyways ..`
`09:00.29`	`zoa`	`assid, not really but shoot`
`09:00.49`	`many`	`teapot: there are people who should stay away from c-coding.`
`09:00.59`	`many`	`sadly, these are the people who write popular programs.`
`09:01.04`	`Assid`	`would you mind looking at that agi? http://nerdvittles.com/index.php?p=82 --- it looks up the caller id name but it doesnt wanna work for me`
`09:01.31`	`teapot`	`99% of coders suck, and I include myself in that category`
`09:01.36`	`boddy`	`nextime:`
`09:01.36`	`zoa`	`i dont know any agi im sorry`
`09:01.48`	`zoa`	`never used it myself`
`09:01.53`	`zoa`	`i pass it on to a collegue`
`09:01.57`	`zoa`	`im a lousy programmer`
`09:02.03`	`Assid`	`its a simple installation.. just calls AGI()`
`09:02.08`	`many`	`teapot: haha. yea, i suck too, but i dont write the programs that other people use frequently and/or in prdocution use :)`
`09:02.19`	`Assid`	`and you gotta edit the .agi file to change 0 to 1 in the ones you wanna use`
`09:02.21`	`teapot`	`many: I just wonder how come that bug didnt get piced up - its the driver for the digium cards..`
`09:02.27`	`many`	`teapot: but dont take me too serious, iam currently on a nagios hate trip, too.`
`09:03.27`	`teapot`	`Are there any digium people here atm ?`
`09:03.49`	`nextime`	`boddy : pri in usa and in turkey/europe are carried over a different link, in turkey is over E1.`
`09:05.40`	`MrChimpy`	`so um, yes, i need a mechanism of triggering calls externally to asterisk (ie. via a perl script getting XML requests or something). is this possible? AGI only seems to work for existing incoming calls.`
`09:06.41`	`many`	`manager`
`09:07.00`	`MrChimpy`	`?`
`09:07.05`	`many`	`AGI is a "Dialplan scripting extension"`
`09:07.16`	`many`	`if you want to trigger events from outside asterisk, use the manager API`
`09:07.23`	`MrChimpy`	`ah, ok, thanks`
`09:07.51`	`*** join/#asterisk sfollo81 (n=stefano@81.88.224.6)`
`09:09.32`	`many`	`mrchimpy: in this specific case, if you want to trigger that (fe) one of your coworkers trigger a call via webinterface, make the webinterface connect to manager api, login and 'originate'`
`09:09.39`	`many`	`MrChimpy: http://www.voip-info.org/wiki-Asterisk+manager+API`
`09:09.48`	`many`	`MrChimpy: http://www.voip-info.org/wiki/index.php?page=Asterisk+Manager+API+Action+Originate`
`09:10.23`	`sfollo81`	`i have to use asterisk as sip register server (like an h323 gatekeeper). which configuration files have i to use?`
`09:11.56`	`many`	`so, whom do i kick now for libpri features without needing to signup to mantis?`
`09:15.18`	`zparta`	`anyone know a good tut for setting up an asterisk server and connect to it with x-lite and hear the monkeys or something`
`09:16.39`	`teapot`	`ok, done the mantis thing`
`09:21.07`	`*** join/#asterisk hads\|home (n=hads@mail.nice.net.nz)`
`09:21.51`	`*** join/#asterisk motu (n=motu@192.165.166.183)`
`09:25.23`	`*** join/#asterisk Sonderblade (n=muh@host-213.131.147.169.addr.tdcsong.se)`
`09:28.56`	`*** join/#asterisk UlbabraB (n=UlbabraB@host241-43.pool8172.interbusiness.it)`
`09:33.23`	`*** join/#asterisk pa (n=Paolo@unaffiliated/pa)`
`09:33.29`	`*** join/#asterisk shido6 (n=shido6@d221-68-200.commercial.cgocable.net)`
`09:35.57`	`*** join/#asterisk UlbabraB (n=UlbabraB@host241-43.pool8172.interbusiness.it)`
`09:36.50`	`*** join/#asterisk yxa (n=diablo@58.185.90.101)`
`09:40.43`	`Assid`	`many: you ever got originate to work?`
`09:42.29`	`many`	`assid: Yessir.`
`09:42.51`	`many`	`i extended tigercms with that.`
`09:43.40`	`yxa`	`anyone familiar with 7940 with *? all i want to know is what are the files needed on the tftp server for it to work`
`09:51.22`	`Assid`	`many: is it necessary to set an actionid?`
`09:53.39`	`*** join/#asterisk alexrch (n=alex_rch@195.246.6.131)`
`09:54.16`	`*** join/#asterisk ghenry (n=ghenry@195.38.86.72)`
`09:54.32`	`alexrch`	`Hi guys, I have a problem with Manager API. Is here someone who has any experiences with using Manager API?`
`09:55.24`	`snitt`	`yes.`
`09:56.01`	`many`	`<PROTECTED>`
`09:56.13`	`many`	`Assid: as the lower example states, too`
`09:57.05`	`alexrch`	`snitt: it seems like Asterisk is sending some strange responses to my commands. String with events don't end properly and so.....it's strange. I have described it in http://bugs.digium.com/view.php?id=7116.`
`09:57.11`	`RoyK`	`ops. asterisk crashed again.....`
`10:07.30`	`tparcina`	`I need database help. I would like to put CID number and account code to database, how to do that? What would be my family/key?`
`10:08.10`	`tparcina`	`RoyK, oops, he did it again ;))`
`10:09.01`	`Sonderblade`	`how do you customize the different tones asterisk send to ip phones?`
`10:11.37`	`*** join/#asterisk kagato (n=kagato@souja.net)`
`10:11.42`	`kagato`	`Anyone awake?`
`10:11.50`	`tparcina`	`can somebody define family and key (from asterisk database) to me? is family=column; and key=row?`
`10:13.09`	`kagato`	`Family is basically a way to organize the keys. Think of it as a single directory that contains the keys (files) that have their values.`
`10:14.04`	`kagato`	`If you had some sort of hypothetical feature you were implementing called "dialmaster", you'd probably put all your keys in the dialmaster family.`
`10:14.44`	`kagato`	`Anyone ever have a problem with Asterisk not correctly detecting answer on outgoing calls? Does that even make sense?`
`10:16.13`	`*** join/#asterisk kio (n=kio@ool-4577ae5e.dyn.optonline.net)`
`10:16.56`	`tparcina`	`kagato, thank you. now, can i put caller id and account code as data in one row? if yes, how?`
`10:17.47`	`tparcina`	`what I'm trying to do is to put in database caller id and account code`
`10:18.56`	`tparcina`	`so, when somebody trys to call longdistance calls that dialplan check's is that caller id in database, if it is I would like it to pick up that accountcode and to call out using that accountcode for CDR`
`10:19.16`	`tparcina`	`does this make sense? is there any easier way to do this?`
`10:19.43`	`kagato`	`Mmmmm.`
`10:19.59`	`kagato`	`Basically, selecting an account code based on the number dialed?`
`10:20.35`	`tparcina`	`ok, i think i can do it without account code. please tell me this`
`10:21.12`	`tparcina`	`how to set caller_id_number in DB and than leter check does this number exist in DB?`
`10:21.35`	`kagato`	`Yes, that can be done.`
`10:21.48`	`tparcina`	`please explain it to me`
`10:22.00`	`tparcina`	`or send me some link`
`10:22.29`	`tparcina`	`because I don't understand this http://www.voip-info.org/wiki/index.php?page=Asterisk+cmd+DBput`
`10:23.09`	`yxa`	`anyone familiar with 7940 with *? all i want to know is what are the files needed on the tftp server for it to work`
`10:23.56`	`kagato`	`tparcina I don't think I understand what you're doing, but it sounds like it is possible.`
`10:24.53`	`tparcina`	`kagato, have you worked with DB so far?`
`10:26.00`	`kagato`	`tparcina: To save a value in the database, you'll need a command like Set(DB(codes/$callerid)=$code) to set the value and something like Set(variable=DB(codes/$callerid)), but I don't remember it exactly. Yes, I've used the DB for some simple stuff (highly customized lunch / night mode for a customer).`
`10:26.18`	`tparcina`	`yxa, you need those files`
`10:26.18`	`tparcina`	`<PROTECTED>`
`10:26.19`	`tparcina`	`10.03.2005 16:33 15 OS79XX.TXT`
`10:26.19`	`tparcina`	`10.03.2005 16:33 129.472 P003-07-4-00.bin`
`10:26.19`	`tparcina`	`10.03.2005 16:33 129.876 P003-07-4-00.sbn`
`10:26.19`	`tparcina`	`10.03.2005 16:44 592.222 P0S3-07-4-00.bin`
`10:26.21`	`tparcina`	`10.03.2005 17:01 461 P0S3-07-4-00.loads`
`10:26.23`	`tparcina`	`10.03.2005 16:45 592.626 P0S3-07-4-00.sb2`
`10:26.25`	`tparcina`	`26.04.2006 12:39 2.590 SIPDefault.cnf`
`10:26.27`	`tparcina`	`13.04.2006 14:28 1.901 XMLDefault.cnf.xml`
`10:27.35`	`*** join/#asterisk kiwi_uk (n=jon@kadus.kiwiuk.net)`
`10:28.45`	`*** join/#asterisk rkr245 (n=ravi@office.callsat-telecom.com)`
`10:28.51`	`kiwi_uk`	`Hi. I've just installed Digiums G.729 codec on Asterisk and have a bit of a problem - calls that need to be transcoded don't have any sound. "show g729" inidicates a channel is using the codec though.`
`10:29.08`	`*** join/#asterisk parag7732 (n=root@83.110.244.106)`
`10:29.16`	`parag7732`	`I m using Call back feature with DISA. When i get a call back and i get a tone if i dial the nos quickly suddenly call disconnects. If i press nos. slowly slowly then it works fine...Can anybody let me know what could be the problem ???\`
`10:29.52`	`kagato`	`parag7732: Do you have callprogress=yes set in zapata.conf? That might be the problem. If you don't need it, turn it off and it may fix it.`
`10:30.24`	`parag7732`	`what it does exactly kagato`
`10:30.32`	`parag7732`	`callprogress=yes`
`10:31.06`	`kagato`	`parag7732: It tries to guess when the channel is hung up or answered and stuff. Your tones may be registered as a fast busy or busy tone which it reads as hung up (and terminates the call).`
`10:31.29`	`kagato`	`parag7732: You can also try playing with busydetect (which might also be the problem).`
`10:31.40`	`parag7732`	`Ohh if i will disable it then i think i will get some hangup problems`
`10:31.47`	`*** join/#asterisk tuxd00d (n=tuxinato@netblock-68-183-112-22.dslextreme.com)`
`10:31.47`	`kagato`	`Try busydetect first, actually.`
`10:32.42`	`*** join/#asterisk blkremedy (n=ur3rdeye@135M14.oasis.mediatti.net)`
`10:33.07`	`parag7732`	`right now setting is this`
`10:33.08`	`parag7732`	`busydetect=yes`
`10:33.09`	`parag7732`	`busycount=2`
`10:33.09`	`parag7732`	`callprogress=no`
`10:33.38`	`kagato`	`try busycount=4. If that doesn't work, try busydetect=no.`
`10:34.05`	`parag7732`	`but i think then hangup problems will arise`
`10:34.10`	`parag7732`	`for this hangup b`
`10:34.18`	`parag7732`	`problems only i put these settings`
`10:34.41`	`kagato`	`If you use busycount=4 it should still catch busy signals, just after a few more seconds. This should, however, give it more tolerance to your tones.`
`10:35.10`	`parag7732`	`okk fine kagato`
`10:35.13`	`parag7732`	`I try`
`10:35.17`	`parag7732`	`thanks for the help`
`10:35.21`	`kagato`	`Good luck.`
`10:36.06`	`yxa`	`anyone familiar with 7940 sip working with * ? all i want to know is what are the files needed on the tftp server for it to work`
`10:37.58`	`Sonderblade`	`can you in asterisk configure which tones ip phones play when they get different messages like Busy Here?`
`10:39.57`	`kiwi_uk`	`yxa: are you using a@h?`
`10:40.28`	`*** join/#asterisk __chris (n=chris@unaffiliated/redlined)`
`10:41.36`	`*** join/#asterisk X-Rob (n=rob-x@dsl-202-173-151-24.qld.westnet.com.au)`
`10:43.11`	`twisla`	`~fxofxs`
`10:43.16`	`jbot`	`i guess fxofxs is An FXO port expects to receive dialtone and receive ring voltage, you plug a phone LINE into this. An FXS port expects to provide dialtone and provide ring voltage, you plug a PHONE into this.`
`10:44.52`	`yxa`	`kiwi_uk nope, just plain *`
`10:45.12`	`yxa`	`kiwi_uk do I actually need the SIP binary?`
`10:45.41`	`kiwi_uk`	`i've never tried without it so I'm not sure, sorry.`
`10:45.53`	`kiwi_uk`	`can't you just try and see?`
`10:46.11`	`yxa`	`kiwi_uk i dont have one now. but i will tomorrow`
`10:47.39`	`kiwi_uk`	`yxa: it works fine - just uses the firmware on the phone`
`10:47.48`	`blkremedy`	`Has anyone had this problem: I have a linksys router that I use to connect to the internet. I also have a spa3k, spa2100 and asterisk server on the LAN side of the router. As long as my router is connected to the internet, my spa's will register with my * box. However, will my internet connection is lost or disconnected the spa's will not register. Any ideas?`
`10:48.17`	`yxa`	`kiwi_uk so all you need is SIPdefault.cnf that's all?`
`10:48.47`	`kiwi_uk`	`you might also want dialplan.xml and ringlist.dat`
`10:49.04`	`kiwi_uk`	`there is lots of info on these phones at voip-info.org`
`10:49.18`	`yxa`	`kiwi_uk think you can zip those files to me?`
`10:49.49`	`yxa`	`kiwi_uk i know. was reading them but none of the docs is telling me what is the bare min`
`10:50.32`	`kiwi_uk`	`there is nothing to send more than whats on the wiki`
`10:51.02`	`tparcina`	`yxa, I have answered your question about 7940, read, don't just ask :))`
`10:52.11`	`yxa`	`tparcina oh shit. sorry i missed it. apologies`
`10:52.54`	`yxa`	`tparcina thing is i do not have those PS03* files. will it work w/o those?`
`10:53.08`	`*** join/#asterisk [Airwolf] (n=airwolf@83.98.235.219)`
`10:54.48`	`tparcina`	`I don't think so, because those files is firmware`
`10:55.28`	`*** join/#asterisk Tommmo (n=tps@203.62.181.52)`
`10:55.59`	`Tommmo`	`Hi, im using asterisk realtime. is there a way to automatically add contexts to realtime instead of editing extensions.conf`
`10:56.00`	`Tommmo`	`?`
`10:58.49`	`*** join/#asterisk jerlique (n=jerlique@lnk6.adl5.adsl.esc.net.au)`
`11:01.18`	`Assid`	`just curious.. is running realtime any better on system resources when you have complex plans?`
`11:02.27`	`Ahrimanes`	`i would guess realtime takes more resources`
`11:03.01`	`Assid`	`why? the whole dialplan isnt parsed.. it only searches as and when it needs to`
`11:03.15`	`Assid`	`besides.. isnt sql faster than astdb ?`
`11:03.30`	`Ahrimanes`	`yeah, but sql queries certainly take more resources than in memory lookups?`
`11:03.46`	`Ahrimanes`	`dialplan isnt saved in astdb afaik`
`11:04.19`	`Assid`	`okay.. but whereever it is saved.. im guessing sql should be faster right?`
`11:05.27`	`Ahrimanes`	`Assid: not really, afaik dialplan when in static files is read into memory and then read from there.. and memory should be quite a bit faster than sql`
`11:05.29`	`*** join/#asterisk zuobf (n=colinzuo@221.219.25.185)`
`11:05.35`	`*** join/#asterisk BugKham (i=BugKham@202.8.86.162)`
`11:07.53`	`tparcina`	`YEEEEEEEEES, I think I have made it! I have locked the phone! Now I need to test it. You can check it here`
`11:07.54`	`tparcina`	`http://www.voip-info.org/wiki/view/Locking+phones`
`11:08.08`	`Assid`	`hrmm.. let me play with it`
`11:08.19`	`tparcina`	`Please give me yours sugestions, how to make it bether`
`11:09.42`	`Tommmo`	`any ideas about my question?`
`11:13.40`	`*** join/#asterisk ToyMan (n=stuq@user-12lcqia.cable.mindspring.com)`
`11:17.20`	`nextime`	`anyone can see an error on doing AgentCallBackLogin in this string?`
`11:17.20`	`nextime`	`<PROTECTED>`
`11:17.51`	`nextime`	`( from extension.conf: )`
`11:17.52`	`nextime`	`exten => _XXXX,2,AgentCallbackLogin(${EXTEN}\|${CALLERID(num)}@operatoricb)`
`11:18.30`	`nextime`	`it say ever "agent log off" even if the agent as never been logged in`
`11:19.09`	`nextime`	`( of course i've checked many times if the config in agents.conf are correct )`
`11:19.37`	`Assid`	`i think i need to move my box back to debian`
`11:19.52`	`nextime`	`Assid : i think that it's a great idea`
`11:19.56`	`nextime`	`( i love debian )`
`11:20.25`	`Assid`	`yeah.. was playing with gentoo`
`11:20.34`	`Assid`	`doesnt justify me sticking to it`
`11:20.54`	`X-Rob`	`GENTOO REEKS OF ARSE.`
`11:20.58`	`X-Rob`	`and so says I.`
`11:21.06`	`nextime`	`i don't like gentoo, but i prefer to don't start a flame about my personal opinion on gentoo :)`
`11:21.57`	`Assid`	`okay this is weird.. i wanna install unixodbc.. and its installing some sound stuff`
`11:21.57`	`*** join/#asterisk adorah (n=FreePBX9@84.94.141.134.cable.012.net.il)`
`11:24.24`	`Assid`	`i wana play with realtime`
`11:28.18`	`*** join/#asterisk zotz (n=zotz@24.231.36.155)`
`11:31.12`	`*** join/#asterisk alphaque (n=alphaque@60.51.217.58)`
`11:31.57`	`*** join/#asterisk UlbabraB (n=UlbabraB@host241-43.pool8172.interbusiness.it)`
`11:32.50`	`*** part/#asterisk BugKham (i=BugKham@202.8.86.162)`
`11:32.53`	`*** join/#asterisk BugKham (i=BugKham@202.8.86.162)`
`11:34.53`	`*** join/#asterisk sshadow (n=sshadow@213-84-101-107.adsl.xs4all.nl)`
`11:36.16`	`blkremedy`	`If I upgrade asterisk@home 2.7 AMP to freePBX will I lose any of my settings?`
`11:36.19`	`*** join/#asterisk festr_ (n=festr@ns.regnet.cz)`
`11:36.38`	`festr_`	`hello, anyone know, what does this mean?`
`11:36.38`	`festr_`	`May 17 13:28:51 DEBUG[30761] chan_iax2.c: chan_iax2: ast_sched_runq ran 1788 scheduled tasks all at once`
`11:39.16`	`*** join/#asterisk bmg505 (n=leon@c1-3-2.rndf.isadsl.co.za)`
`11:42.57`	`*** join/#asterisk MMaster23 (n=no@ip229-116-173-82.adsl2.versatel.nl)`
`11:43.39`	`MMaster23`	`hey guys`
`11:44.00`	`MMaster23`	`having some problems with my asterisk ... custom menu sounds won't play`
`11:46.13`	`sshadow`	`MMaster23: is the path correct? have you omitted the extension of the file?`
`11:46.43`	`MMaster23`	`http://pastebin.com/722195`
`11:46.52`	`MMaster23`	`more info there`
`11:47.00`	`MMaster23`	`the path is correct`
`11:47.08`	`MMaster23`	`and i have cut off the ".gsm"`
`11:48.01`	`sshadow`	`MMaster23: drop .gsm extension ok. have u tried renaming the file other than ## ?`
`11:51.32`	`MMaster23`	`the file isn't named ##`
`11:51.40`	`MMaster23`	`that's just for internet`
`11:51.55`	`MMaster23`	`##CENSOR## = client project name`
`11:52.27`	`sshadow`	`ok`
`11:53.47`	`tparcina`	`Authenticate - it goes to next priority if I miss three times?!?! just like when I authenticate with success!`
`11:53.50`	`sshadow`	`are the file rights ok? ie chmod 744 ? Is the filesize > 0 bytes? it happened to me a couple of times`
`11:53.54`	`*** join/#asterisk myiagy (n=myiagy@mail.voffice.com.br)`
`11:54.26`	`tparcina`	`so, there are no diferents of geting it right or missing it for three times?`
`11:54.51`	`MMaster23`	`lol`
`11:54.52`	`MMaster23`	`doh`
`11:54.53`	`MMaster23`	`nm`
`11:54.56`	`MMaster23`	`i'm an idiot`
`11:55.01`	`MMaster23`	`look at the dialplan`
`11:55.25`	`MMaster23`	`had to remove the ext in the dialplan`
`11:55.25`	`tparcina`	`question is, how to make authorization goes to n+101 priority (or anywhere else) if I miss it three times`
`11:57.10`	`MMaster23`	`k tnx guys`
`11:59.40`	`*** join/#asterisk [TK]D-Fender (n=joe@toronto-HSE-ppp4122655.sympatico.ca)`
`12:01.46`	`*** join/#asterisk ghost99 (n=neville@222-153-92-225.jetstream.xtra.co.nz)`
`12:02.21`	`tparcina`	`anybody knows why this doesn't work (j option doesn't work - it doesn't jump to n+101 priority)`
`12:02.22`	`tparcina`	`exten => 258,1,Answer`
`12:02.22`	`tparcina`	`exten => 258,n,Wait(1)`
`12:02.22`	`tparcina`	`exten => 258,n,NoOp(Caller ID broj: ${CALLERID(number)})`
`12:02.22`	`tparcina`	`exten => 258,n,NoOp(autoriziram s pass datotekom)`
`12:02.22`	`tparcina`	`exten => 258,n,Authenticate(/etc/asterisk/passwords/${CALLERID(number)}\|j) ; ako =1 =>next, else n+101`
`12:02.24`	`tparcina`	`exten => 258,n,NoOp(Autorizacija je uspjesna)`
`12:02.26`	`tparcina`	`exten => 258,n,Set(DB(vanjski/${CALLERID(number)})=yes)`
`12:02.28`	`tparcina`	`exten => 258,n,Playback(lama/autorizacija_uspjesna)`
`12:02.30`	`tparcina`	`exten => 258,n,Hangup`
`12:02.32`	`tparcina`	`exten => 258,n,NoOp(Autorizacija nije uspjela)`
`12:02.34`	`tparcina`	`exten => 258,n+101,Playback(lama/autorizacija_neuspjesna)`
`12:02.36`	`tparcina`	`exten => 258,n,Hangup`
`12:03.29`	`[TK]D-Fender`	`tparcina : PASTEBIN!`
`12:03.31`	`[TK]D-Fender`	`~pb`
`12:03.33`	`jbot`	`i guess pb is a place to paste your stuff without flooding the channel - try http://pastebin.com/, or http://pastebin.ca`
`12:04.02`	`tparcina`	`D-Fender, sorry, didn't know about that`
`12:04.28`	`[TK]D-Fender`	`tparcina : You can't just do n+101 like that if I'm not mistaken. Hard-code the #'s`
`12:05.30`	`tparcina`	`so this line should be exten => 258,106,Playback(lama/autorizacija_neuspjesna)`
`12:05.40`	`tparcina`	`I'll try that`
`12:05.43`	`[TK]D-Fender`	`tparcina : No`
`12:05.51`	`[TK]D-Fender`	`tparcina :You need to renumber ALL of the lines.`
`12:05.58`	`[TK]D-Fender`	`tparcina : no "n"'s`
`12:06.23`	`tparcina`	`ok, I'll try that then`
`12:08.09`	`*** join/#asterisk saftsack (n=saftsack@p54A7ED6B.dip.t-dialin.net)`
`12:10.45`	`*** join/#asterisk FlyboySR22 (n=rsears@gateway.americanis.net)`
`12:10.52`	`*** part/#asterisk sshadow (n=sshadow@213-84-101-107.adsl.xs4all.nl)`
`12:11.29`	`Ironhand`	`I'm using an asterisk server to connect a SIP client to a SIP server/proxy... how do I force asterisk to let the rtp packets go through itself rather than create a direct link between client and server?`
`12:12.02`	`Ironhand`	`(basically so that my client only sees packets from my asterisk server)`
`12:13.03`	`kay2`	`how can I rewrite the domain when using SIP ?`
`12:13.31`	`kay2`	`I can't place a call because it wants me to have a specific domain to let it go through`
`12:14.23`	`aetius`	`Ironhand: look at the "reinvite" and "canreinvite" settings in sip.conf.`
`12:14.40`	`Ironhand`	`ok, thx aetius`
`12:16.11`	`Ironhand`	`yup, that did it, thanks again`
`12:19.10`	`*** join/#asterisk bjohnson (n=bjohnson@jecinc.tor.istop.com)`
`12:22.28`	`*** join/#asterisk Shoragan (n=shoragan@d072.apm.etc.tu-bs.de)`
`12:30.06`	`*** join/#asterisk Sebastian[1] (n=Sebastia@ip-5-112.sn2.eutelia.it)`
`12:30.11`	`*** part/#asterisk ghost99 (n=neville@222-153-92-225.jetstream.xtra.co.nz)`
`12:30.36`	`Sebastian[1]`	`Hi, i have one question, how can i let two phones use the same extension in asterisk?`
`12:30.55`	`*** join/#asterisk otmar (n=lendl@nat.labs.nic.at)`
`12:30.59`	`*** join/#asterisk tparcina (n=tparcina@wr-lama.iskon.hr)`
`12:31.10`	`[TK]D-Fender`	`kay2 : Look at the "realm" parameter`
`12:31.24`	`tparcina`	`I needed only to change one line from n+101 to 106`
`12:31.48`	`tparcina`	`because * doesn't know to which n to add 101`
`12:31.52`	`[TK]D-Fender`	`Sebastian[1] : Make an exten that just dials both. There is no inherent association between a device and any concept of "extension #"`
`12:32.39`	`[TK]D-Fender`	`tparcina : Perhaps, but there is no point in keeping the other n's because if you try to insert a line before your "J" line it won't number properly.`
`12:32.50`	`[TK]D-Fender`	`tparcina : Better complete and safe, than sorry.`
`12:32.52`	`Sebastian[1]`	`<PROTECTED>`
`12:33.10`	`Sebastian[1]`	`<PROTECTED>`
`12:34.02`	`[TK]D-Fender`	`Sebastian[1] : what I just told is "YES" you can do it, just that the idea of each device (or phone if you will) can be dialed in any way you determine.`
`12:34.05`	`*** join/#asterisk Frogzoo (n=Frogzoo@60-240-39-20.tpgi.com.au)`
`12:34.33`	`[TK]D-Fender`	`Sebastian[1] : ie : Dial(SIP/100&SIP/200,20)`
`12:34.41`	`Sebastian[1]`	`<PROTECTED>`
`12:34.59`	`tzanger`	`morning [TK]D-Fender`
`12:35.04`	`Sebastian[1]`	`<PROTECTED>`
`12:35.12`	`[TK]D-Fender`	`Sebastian[1] : You don't log in as the same phone, it will be seperat, but you will send calls to them SIMULTANEOUSLY in your dial-plan`
`12:35.23`	`[TK]D-Fender`	`~amp`
`12:35.35`	`jbot`	`hmm... amp is NOT supported here! People using it should join #freepbx (FreePBX is the new name of AMP)`
`12:35.35`	`[TK]D-Fender`	`Sebastian[1] : that'd be a ring-group I believe.`
`12:35.47`	`Sebastian[1]`	`Sorry`
`12:36.09`	`Sebastian[1]`	`<[TK]D-Fender>: thanks`
`12:36.31`	`[TK]D-Fender`	`Any Ops about?`
`12:36.36`	`[TK]D-Fender`	`Sebastian[1] : np, and gl`
`12:37.53`	`*** part/#asterisk Sebastian[1] (n=Sebastia@ip-5-112.sn2.eutelia.it)`
`12:43.35`	`stoffell`	`lol tk ;)`
`12:43.43`	`stoffell`	`it takes a few days it seems ;)`
`12:44.13`	`tparcina`	`D-Fender, but is harder to change all numbers then double check that everything is counted right (at least for me).`
`12:44.26`	`tparcina`	`ANyway, thank you for your sugestion`
`12:45.56`	`[TK]D-Fender`	`stoffell : For what?`
`12:46.01`	`*** join/#asterisk \|dennis\| (i=dennis@200.32.215.84)`
`12:46.33`	`[TK]D-Fender`	`tparcina : Well for a single script sure, just know that if you forget it you might frustrate yourself trying to debug it.`
`12:47.30`	`tzafrir`	`how much time is stored in 1MB of gsm sound file? Is the rate of time/compressed-size a rather regular one for normal phone data?`
`12:48.37`	`[TK]D-Fender`	`tzafrir : its fixed rate I believe so if you do a 3 minute recording, then a 6 minute it should be pretty much identical.`
`12:48.44`	`[TK]D-Fender`	`(in proportion)`
`12:49.33`	`Mavvie`	`there should be a better way to manipulate the CCM database than via their browser interface.`
`12:52.13`	`*** join/#asterisk iulius (n=iulius@mail1.technologieshq.com)`
`12:52.17`	`stoffell`	`[TK]D-Fender, for getting the topic changed ;)`
`12:52.27`	`Mavvie`	`all I want is to replace the value of one field for about 400 entries...`
`12:52.41`	`*** join/#asterisk [Airwolf] (n=airwolf@83.98.235.219)`
`12:55.21`	`*** join/#asterisk unixgeek (n=unixgeek@216-220-234-197.exploremaine.com)`
`12:59.09`	`*** join/#asterisk darkskiez (n=darkskie@194.247.78.146)`
`12:59.23`	`*** join/#asterisk gmaruzz (n=gmaruzz@217-133-80-112.b2b.tiscali.it)`
`13:02.21`	`[TK]D-Fender`	`stoffell : I asked yesterday as well... hope it gets put back in soon.`
`13:02.59`	`kay2`	`[TK]D-Fender: even with realm`
`13:03.03`	`kay2`	`it doesnt go out :(`
`13:04.36`	`kay2`	`[TK]D-Fender: basically, using SJphone, I can place a call, but using asterisk It doesn't, and when I look at the SIP, SJphone sends the domain properly but asterisk sends its own domain`
`13:05.18`	`[TK]D-Fender`	`kay2 : Pastebin your peer entry`
`13:05.49`	`tzanger`	`hahaha`
`13:05.54`	`tzanger`	`Bus Error (passengers dumped)`
`13:11.14`	`*** part/#asterisk r_evolution (i=_evoluti@208.251.203.246)`
`13:11.18`	`*** join/#asterisk r_evolution (i=_evoluti@208.251.203.246)`
`13:13.11`	`Sonderblade`	`how do you do to add a context to asterisk?`
`13:13.16`	`*** join/#asterisk bkw_ (n=brian@adsl-70-142-39-36.dsl.tul2ok.sbcglobal.net)`
`13:13.48`	`kay2`	`[TK]D-Fender: http://pastebin.com/722311`
`13:13.52`	`*** join/#asterisk mercestes (n=merceste@69.15.174.114)`
`13:14.14`	`Mystiq`	`hi all, on one of my pabx a Busy() doesn't wait for the user to hangup.. but just continues the dialplan or keeps the phone ringing`
`13:14.43`	`*** join/#asterisk tdonahue-laptop (n=tdonahue@64.201.13.172)`
`13:14.49`	`Mystiq`	`i'm using asterisk 1.2 (some cvs version)`
`13:14.53`	`[TK]D-Fender`	`Sonderblade : sounds like you need to do some very basic reading about dialplans.`
`13:14.55`	`[TK]D-Fender`	`~thebook`
`13:14.59`	`jbot`	`thebook is, like, somebody said thebook was Asterisk: The Future of Telephony, released under a Creative Commons license and available at http://www.asteriskdocs.org << Meet Jim Van Meggelen at Cluecon http://www.cluecon.com`
`13:15.41`	`kay2`	`[TK]D-Fender: so basically in SJphone, all I put is freephonie.net for the proxydomain and userdomain`
`13:15.47`	`[TK]D-Fender`	`kay2 : Hmmm`
`13:15.59`	`kay2`	`[TK]D-Fender: http://pastebin.com/722311`
`13:16.12`	`*** join/#asterisk brad_mssw (n=brad@shop.monetra.com)`
`13:16.23`	`[TK]D-Fender`	`kay2 : You shouldn't put anything like that in SJPhone. it should pass calls to * and * makes the like to your provider on its behalf...`
`13:16.47`	`[TK]D-Fender`	`link`
`13:17.27`	`kay2`	`[TK]D-Fender: what I meant is that if I use SJphone straight with the proxy it works`
`13:17.41`	`kay2`	`but when I use asterisk to call using the proxy with the SIP.conf u saw it doesnt work`
`13:17.57`	`kay2`	`[TK]D-Fender: so I wanna know what I do wrong`
`13:18.05`	`*** join/#asterisk Meaty (n=cp_simbu@office.abi.ca)`
`13:19.13`	`[TK]D-Fender`	`kay2 : Did you ask them for a working sample?`
`13:19.42`	`kay2`	`no`
`13:20.11`	`kay2`	`[TK]D-Fender: it's just that I don't get why if I use a SIP client to connect it works but if I use * to register it refuses it`
`13:22.25`	`Katty`	`mew.`
`13:22.31`	`Sonderblade`	`[TK]D-Fender: if it is that simple, can't you just tell me?`
`13:23.24`	`pif`	`anyone using the Thomson ST 2030 ?`
`13:23.29`	`[TK]D-Fender`	`Sonderblade : just add something like [justanewcontext] into extensions.conf and ther you are!`
`13:23.40`	`*** join/#asterisk wunderkin (i=kev@ip68-226-113-228.ph.ph.cox.net)`
`13:24.14`	`*** join/#asterisk Celery_General (n=chiv@enforcer.solutionip.com)`
`13:24.21`	`Sonderblade`	`[TK]D-Fender: yeah that's simple, but how do i call an extension in that context?`
`13:24.34`	`*** join/#asterisk _Paulo_ (n=Paulo@c906d4b0.virtua.com.br)`
`13:25.27`	`[TK]D-Fender`	`Sonderblade : You seem to be lacking the very basic concepts of what a context is, and how dial-plan logic works. You really need to download THEBOOK as linked above and do this bit of basic reading first.`
`13:25.54`	`kay2`	`[TK]D-Fender: they could have blocked the UserAgent ?`
`13:26.18`	`[TK]D-Fender`	`kay2 : what is the exact error you get? apstebin the call attempt.`
`13:26.56`	`kay2`	`it doesnt even register`
`13:27.40`	`[TK]D-Fender`	`kay2 : Doesn't matter if it registers you should still be able to attempt a call against that peer.`
`13:27.58`	`*** join/#asterisk Assid (n=assid@203.115.83.214)`
`13:28.00`	`[TK]D-Fender`	`turn on SIP debug and pastbin theo whole attempt and actually read the refusal reason.`
`13:28.24`	`Assid`	`hey tkd`
`13:28.25`	`Assid`	`hows u`
`13:28.35`	`Celery_General`	`Does anyone have a PRI T1 provider they can reccomend?? Anywhere in US/Canada? (Cheaper is always a plus ;)`
`13:29.14`	`*** join/#asterisk mhnoyes (n=mhnoyes@dialup-4.246.6.99.Dial1.SanJose1.Level3.net)`
`13:29.44`	`*** part/#asterisk mhnoyes (n=mhnoyes@dialup-4.246.6.99.Dial1.SanJose1.Level3.net)`
`13:29.53`	`Assid`	`[TK]D-Fender: u ever worked with realtime?`
`13:30.34`	`r_evolution`	`i think everyone works in realtime, don't they?`
`13:30.37`	`[TK]D-Fender`	`Assid : nope....`
`13:30.54`	`[TK]D-Fender`	`Celery_General : Depends where you are obviously...`
`13:30.55`	`*** join/#asterisk puzzled (n=patrick@puzzled.xs4all.nl)`
`13:30.57`	`r_evolution`	`i mean... all things considered... the clock is usually ticking...`
`13:31.07`	`r_evolution`	`btw sup TK ;)`
`13:31.22`	`[TK]D-Fender`	`r_evolution : I work in Planck Time ;)`
`13:31.35`	`r_evolution`	`haha. i work half the time ;x`
`13:31.43`	`r_evolution`	`here's a retarded concept for you`
`13:31.46`	`r_evolution`	`O_O`
`13:31.57`	`r_evolution`	`TK now only exists in theory.`
`13:32.15`	`r_evolution`	`k -- on the subject of Realtime`
`13:32.19`	`Celery_General`	`<[TK]D-Fender>: Location in NA isn't a consideration.. just looking for big b/w and cheapish lines...`
`13:32.28`	`r_evolution`	`you realize you can load queues/queue members from realtime`
`13:32.36`	`*** join/#asterisk Curus (n=Curus@x1-6-00-12-17-df-1b-be.k182.webspeed.dk)`
`13:32.41`	`r_evolution`	`but you don't seem to be able to load actual AGENTS`
`13:32.46`	`r_evolution`	`i.e. you can setup a queue...`
`13:32.53`	`r_evolution`	`and you can setup the agents IN said queue...`
`13:33.03`	`r_evolution`	`but the agents seem to require being in a flat file... O_o`
`13:33.10`	`r_evolution`	`or else the wiki needs to be updated...`
`13:33.11`	`r_evolution`	`hrrmm`
`13:33.22`	`Celery_General`	`[TK]D-Fender: willing to set up shop where we can get best bang for the buck.`
`13:33.34`	`Assid`	`i need to find a decent place for unltd incoming (maybe 4-5 channels) but with $5`
`13:33.45`	`[TK]D-Fender`	`Celery_General : I'm not an ITST / CLEC or anything in the family.`
`13:33.48`	`Assid`	`dont wanna use the free ones as the quality isnt always that good`
`13:33.52`	`Assid`	`can anyone suggest>?`
`13:34.03`	`[TK]D-Fender`	`Celery_General : What have you been quoted and were are you located?`
`13:34.39`	`[TK]D-Fender`	`r_evolution : Bet on WIKI failure...`
`13:34.49`	`r_evolution`	`probably`
`13:34.51`	`Hmmhesays`	`sevard: you punk you there?`
`13:34.59`	`sevard`	`sup`
`13:35.32`	`Hmmhesays`	`paypal me ten bucks and i'll give you my rhinonews account`
`13:35.38`	`Hmmhesays`	`i think i'm going to switch to giganews`
`13:35.41`	`Celery_General`	`[TK]D-Fender: Around $6k / 5 pri t1`
`13:35.52`	`Assid`	`err.. what does this mean?`
`13:35.53`	`Assid`	`63246 rate centers (NPA/NXX) in the US for $0.01`
`13:35.53`	`Assid`	`19050 rate centers (NPA/NXX) in the US for $0.024`
`13:35.53`	`kay2`	`[TK]D-Fender: it says that for the register: *CLI> May 17 23:39:42 NOTICE[26419]: chan_sip.c:5291 sip_reg_timeout: -- Registration for '0871737978@freephonie.net' timed out, trying again (Attempt #1)`
`13:36.13`	`sevard`	`Hmmhesays: giganews is good shit, i've never used rhinonews`
`13:36.21`	`sevard`	`monthly fee?`
`13:36.21`	`Assid`	`rhinonews?`
`13:36.25`	`r_evolution`	`you're looking at voicepulse arent you assid?`
`13:36.26`	`Celery_General`	`[TK]D-Fender: doesn't really get much better as you add additional lines.`
`13:36.30`	`Hmmhesays`	`40 days retention in binaries`
`13:36.36`	`Hmmhesays`	`for $15/month`
`13:37.00`	`Assid`	`r_evolution: yes. whats that mean?`
`13:37.07`	`r_evolution`	`it means those guys are rejects`
`13:37.07`	`sevard`	`are you going to pay the monthly fee?`
`13:37.13`	`r_evolution`	`i tried for an hour yesterday to get a freaking rate deck`
`13:37.16`	`Hmmhesays`	`no, but you can have the rest of my month`
`13:37.24`	`r_evolution`	`and the guy kept saying 'well you can just use our flexrate'`
`13:37.24`	`Hmmhesays`	`which is 3 weeks`
`13:37.36`	`[TK]D-Fender`	`kay2 : I did NOT ask about your REGISTER attempt, only a CALL attemp. Actually comment the register line out ENTIRELY.`
`13:37.38`	`r_evolution`	`i dont WANT to use your LCR -- i have my own... give me an effin rate deck`
`13:37.42`	`VoicePulse`	`Assid: It means we're giving you 1� calling to areas where we can afford to. You can use someone else for the other areas if they're cheaper.`
`13:37.48`	`[TK]D-Fender`	`kay2 : And PASTEBIN your CLI SIP debug for it.`
`13:37.55`	`r_evolution`	`essentially... they're not going to tell you WHICH rate centers are going at WHICH Cost`
`13:38.07`	`kay2`	`[TK]D-Fender: ok sorry :)`
`13:38.21`	`[TK]D-Fender`	`Celery_General : $6k for 5 PRI? that does blow.... where are you again?`
`13:38.21`	`r_evolution`	`just that some go for 1c and some go for 2.4c`
`13:38.37`	`Assid`	`didnt know you guys hand out here`
`13:38.45`	`kay2`	`*CLI> -- Executing Dial("OSS/dsp", "SIP/0871737978/0621161097") in new stack`
`13:38.45`	`kay2`	`<PROTECTED>`
`13:38.45`	`kay2`	`Use EXIT or QUIT to exit the asterisk console`
`13:38.47`	`Assid`	`hang even`
`13:38.55`	`kay2`	`oh pastbin:(`
`13:39.01`	`Assid`	`btw: is mathieu in ?`
`13:39.03`	`Celery_General`	`Atlantic canada..... case in point ;)`
`13:39.11`	`[TK]D-Fender`	`kay2 : and I said I wanted SIP debug info, not jsut a dial-plan trace`
`13:39.13`	`r_evolution`	`again read my comments assid...`
`13:39.17`	`VoicePulse`	`Assid: If you have any questions on getting set up, please /msg this nick and someone will help you out.`
`13:39.20`	`r_evolution`	`if a company can't provide you with a rate deck`
`13:39.22`	`*** join/#asterisk Falle (n=falle@falle.se)`
`13:39.23`	`r_evolution`	`don't waste your time :)`
`13:39.29`	`*** join/#asterisk acrg (n=aragon@decoder.geek.sh)`
`13:39.47`	`*** join/#asterisk yain (n=yain@86-102-1-17.xdsl.primorye.ru)`
`13:39.47`	`[TK]D-Fender`	`Celery_General : PRI rates depend where you are. In Monreal proper its 30% cheaper then areas not too far off island. Depends on your telco.`
`13:39.52`	`acrg`	`hi`
`13:40.34`	`acrg`	`I'm very new to asterisk and have just got it running off a sample config just to test sound quality`
`13:40.50`	`Hmmhesays`	`good for you`
`13:40.54`	`acrg`	`I've setup sip and am using xlite to run the echo test`
`13:41.01`	`acrg`	`and am getting a clicking sound`
`13:41.02`	`Hmmhesays`	`now the question is, is there anyone better than giganews`
`13:41.14`	`acrg`	`is this normal ?`
`13:41.40`	`acrg`	`changing codecs doesn't make a difference`
`13:41.52`	`*** join/#asterisk viLeR (i=1000@200.114.70.228)`
`13:41.56`	`[TK]D-Fender`	`acrg : Could be your mic/headphones setup sucks and everything else is fine... try another headset or something else.`
`13:42.21`	`Celery_General`	`I hear there are some good deals to be had in Boston or NY.... just doing some shopping around now... What kind of rate would you get in Montreal?`
`13:43.00`	`acrg`	`I've tried different headsets and with the mic disabled`
`13:43.08`	`acrg`	`even the greeting from asterisk clicks`
`13:43.19`	`acrg`	`this is on a lan btw`
`13:43.27`	`*** join/#asterisk BadPacket (n=root@unaffiliated/badpacket)`
`13:43.48`	`[TK]D-Fender`	`Celery_General : I can get a PRI here for about $700 on contract`
`13:44.19`	`[TK]D-Fender`	`Celery_General : 1 year would be aroua little under $800`
`13:44.44`	`Celery_General`	`hrmm.... who is your telco? (any ideas on the LD rates?)`
`13:45.06`	`[TK]D-Fender`	`I'm with AllStream and CAN/US @ $03c/min`
`13:45.15`	`tzanger`	`heh`
`13:45.18`	`tzanger`	`my devicenet gateway is owned`
`13:45.22`	`tzanger`	`(bit 0 of the status attribute of the indentity object is set)`
`13:45.30`	`tzanger`	`I don't see a bit for pwn3d so I think I'm safe :-)`
`13:45.48`	`*** join/#asterisk Meaty-Wrk (n=cp_simbu@office.abi.ca)`
`13:46.07`	`Celery_General`	`[TK]D-Fender: Well thats leaps and bounds better than here at .05c/min`
`13:46.24`	`*** join/#asterisk littleball (n=littleba@cm55.epsilon171.maxonline.com.sg)`
`13:46.38`	`[TK]D-Fender`	`Celery_General : yeah, that blows.`
`13:46.50`	`[TK]D-Fender`	`Celery_General : What are you requirements?`
`13:46.50`	`Celery_General`	`[TK]D-Fender: Thanks for the help!`
`13:47.03`	`*** join/#asterisk somegeek (i=levin@unaffiliated/somegeek)`
`13:47.12`	`boddy`	`hii all I have installed intel ipp but I cant find codec_g279.so`
`13:47.15`	`littleball`	`hello, i am wondering whether it is possible to have communication betweeen two sip phones which are behind different firewalls, and the media doesn't pass the center server.`
`13:47.29`	`boddy`	`also I have installed samples`
`13:48.10`	`brad_mssw`	`boddy: you need the wrapper around the ipp examples ...`
`13:48.17`	`*** join/#asterisk robl^ (n=robl@dsl093-025-218.hou1.dsl.speakeasy.net)`
`13:48.31`	`brad_mssw`	`boddy: http://www.readytechnology.co.uk/open/ipp-codecs-g729-g723.1/ and here for the binaries: http://kvin.lv/pub/Linux/Asterisk/`
`13:48.43`	`*** part/#asterisk zuobf (n=colinzuo@221.219.25.185)`
`13:48.52`	`[TK]D-Fender`	`littleball : reinvite through NAT = very hard. maybe if you are actually forwarding all the appropriate ports on each side.`
`13:49.10`	`brad_mssw`	`boddy: though you need to purchase a license if you're using it for commercial purposes (we bought ours through Digium, and use the digium-provided modules)`
`13:50.11`	`littleball`	`[TK]D-Fender, how does it work? can explain?`
`13:50.52`	`[TK]D-Fender`	`littleball : Not so much.... basically if you forward NAT & RTP on each sides firwall to the SIP device behind it, it might work. Give it a try`
`13:51.10`	`Celery_General`	`[TK]D-Fender: Pretty open ended and hypothetical at the moment.. but looking for ~400+ lines to start..... ideally in a location with a data connection that has some low latency's going overseas.`
`13:51.10`	`boddy`	`brad_mssw:No I havent use for commercial`
`13:51.21`	`boddy`	`also I said that to intel :)`
`13:52.22`	`Hmmhesays`	`my god this intarweb connection blows`
`13:52.35`	`yain`	`is it possible to have softphone connect to * via IAX and to make asterix "forward" calls from client to SIP proxy? where do I start? what to read?`
`13:52.46`	`boddy`	`intel'codecs free for non-commercial using`
`13:54.00`	`[TK]D-Fender`	`Celery_General : Geez, trying to become an ITSP?`
`13:54.27`	`*** join/#asterisk nextime (n=nextime@213-140-6-103.ip.fastwebnet.it)`
`13:54.50`	`boddy`	`?`
`13:55.08`	`*** join/#asterisk Cresl1n (n=matt@gateway.digium.com)`
`13:55.12`	`boddy`	`[TK]D-Fender:have you any idea for my question :)`
`13:56.54`	`kay2`	`[TK]D-Fender: http://pastebin.com/722393`
`13:56.55`	`kay2`	`here`
`13:57.04`	`kay2`	`[TK]D-Fender: I put the debug info`
`13:58.22`	`Celery_General`	`[TK]D-Fender: When i say 400 i mean 400 voice lines... so ~16 T1's.... gtg thanks again.`
`13:58.49`	`Celery_General`	`\quit`
`13:59.01`	`Celery_General`	`oops`
`13:59.34`	`*** part/#asterisk wwalker (n=wwalker@pdpc/supporter/sustaining/wwalker)`
`14:01.49`	`*** part/#asterisk kmilitzer (n=km@office-gw.westend.com)`
`14:04.01`	`littleball`	`<PROTECTED>`
`14:04.21`	`acrg`	`are there problems with sip sound quality when running asterisk on bsd ?`
`14:04.28`	`*** join/#asterisk stack_ (n=stack@63.239.190.202)`
`14:04.49`	`*** join/#asterisk stack_ (n=stack@63.239.190.202)`
`14:04.57`	`Ahrimanes`	`acrg: hm i havent experienced anything major and i run exclusively on freebsd`
`14:05.43`	`stack_`	`Every once in a while I get "Channel 0/22, span 2 received AOC-E charging 136435576 units" on my PRI channel... what's this mean?`
`14:05.44`	`acrg`	`could sip client software be the cause of clicking ?`
`14:05.58`	`Meaty`	`i dont have prob with sip sound on freebsd too`
`14:06.28`	`Hmmhesays`	`acrg: that is most likely`
`14:06.28`	`Ahrimanes`	`acrg: yes, even the machine you run it on.. irq stuff.. if you run xwindows with framebuffer i think it tends to affect quality`
`14:06.46`	`acrg`	`ok cool, let me try something else then`
`14:06.51`	`acrg`	`running x-lite on xp`
`14:06.58`	`Ahrimanes`	`oh ok`
`14:07.07`	`Ahrimanes`	`try sjphone, works well for us`
`14:07.23`	`acrg`	`thanks :)`
`14:07.37`	`Hmmhesays`	`i have found this version of firefly I have works great`
`14:08.16`	`boddy`	`anybody help me ?`
`14:08.17`	`Ahrimanes`	`Hmmhesays: same here, except for some nat issues`
`14:08.32`	`Hmmhesays`	`i don't have any nat issues with FF`
`14:08.39`	`Hmmhesays`	`and the echo chan is great`
`14:09.01`	`[TK]D-Fender`	`kay2 : You only showed me the INVITE. I want to see the ANSWER.`
`14:09.21`	`Ahrimanes`	`yeah generally it worked great, but it became unreachable on many clients for us`
`14:09.21`	`*** join/#asterisk r0d3nt\|m (i=r0d3nt@tinfoilhat.net)`
`14:09.25`	`wunderkin`	`stack_, google aoc-e`
`14:09.56`	`Ahrimanes`	`boddy: sorry, havent tried intel stuff`
`14:10.05`	`blkremedy`	`has anyone else lost phpmyadmin after upgrading to freepbx?`
`14:10.30`	`blkremedy`	`is there a fix for this or work around?`
`14:10.32`	`[TK]D-Fender`	`boddy : Sorry, nope, nothing to say for your issue. Go buy licenses.... how many do you feel you would need?`
`14:11.50`	`stack_`	`wunderkin, I know what it is... why does it only show up a couple of times a day?`
`14:13.33`	`wunderkin`	`well that wasn't your question, aoc-e is sent at the end of the call, no idea why you only see it once in awhile`
`14:13.42`	`acrg`	`ok, I think I've found the problem`
`14:13.49`	`acrg`	`definately this PC`
`14:14.31`	`acrg`	`phew, glad it's not asterisk :)`
`14:14.34`	`*** join/#asterisk jeebusmobile (n=jeebusmo@29palms-cuda1-68-170-36-65.losaca.adelphia.net)`
`14:15.18`	`Ahrimanes`	`acrg: what was the problem ?`
`14:15.26`	`[TK]D-Fender`	`acrg : No, its not *.`
`14:15.40`	`[TK]D-Fender`	`Ahrimanes : Craclk on local SIP call to echo test`
`14:15.50`	`[TK]D-Fender`	`crackle*`
`14:15.56`	`acrg`	`Ahrimanes not 100% sure, but I think it's something to do with directsound and this hardware and/or drivers`
`14:16.03`	`Ahrimanes`	`[TK]D-Fender: ah, actually meant what the issue with the pc turned out to be :)`
`14:16.10`	`Ahrimanes`	`acrg: sounds plausible`
`14:16.16`	`acrg`	`it was doing it now in the sound test of sjphone`
`14:16.16`	`sevard`	`Hmmhesays: do you have a TDM card? does your Master.csv display CID when you dial in?`
`14:16.31`	`Hmmhesays`	`sevard: I rarely use zaptel hardware`
`14:16.34`	`sevard`	`die`
`14:16.36`	`sevard`	`anyone else?`
`14:16.40`	`acrg`	`going to try upgrading drivers and directx`
`14:17.02`	`Hmmhesays`	`shakin' that ass on the floor bumpin' and grindin that pole, the way she's grindin that pole I think i'm losing control`
`14:17.16`	`Ahrimanes`	`Hmmhesays: uhm`
`14:17.22`	`*** join/#asterisk rogier (n=rogier@16-65-dsl.ipact.nl)`
`14:17.26`	`Hmmhesays`	`you heard me`
`14:17.28`	`sevard`	`yeah, umm`
`14:17.44`	`Hmmhesays`	`i'm reading a book on postgresql ok, leave me alone`
`14:17.48`	`Ahrimanes`	`Hmmhesays: webcam? hehe`
`14:18.42`	`acrg`	`strange, it's better if sjphone is set to not use directsound`
`14:19.25`	`acrg`	`brb`
`14:20.37`	`*** join/#asterisk klasstek (n=nunyobiz@ip67-154-143-188.z143-154-67.customer.algx.net)`
`14:21.38`	`*** join/#asterisk anthm (n=anthmct@CPE-69-76-83-52.wi.res.rr.com)`
`14:21.38`	`*** mode/#asterisk [+o anthm] by ChanServ`
`14:22.34`	`*** part/#asterisk yain (n=yain@86-102-1-17.xdsl.primorye.ru)`
`14:23.01`	`sevard`	`hidecallerid=no`
`14:23.01`	`sevard`	`callerid=asreceived`
`14:23.01`	`sevard`	`callwaiting=no`
`14:23.01`	`sevard`	`cidsignalling=bell`
`14:23.01`	`sevard`	`cidstart=polarity`
`14:23.06`	`sevard`	`but STILL no inbound CID`
`14:25.41`	`*** join/#asterisk gmaruz1 (n=gmaruzz@217-133-80-112.b2b.tiscali.it)`
`14:26.30`	`[TK]D-Fender`	`anthm: !`
`14:26.39`	`anthm`	`yes!`
`14:27.18`	`*** join/#asterisk BeEpY (i=ben@ben.bint.org)`
`14:27.30`	`BeEpY`	`Blimey, a lot more people than i expected to see!`
`14:27.42`	`BeEpY`	`Anyone here familiar with the Cisco 7970?`
`14:27.45`	`[TK]D-Fender`	`anthm : Care to add back in the AMP/FreePBX referral instructions into the channel topic for us? :)`
`14:28.23`	`anthm`	`which were what?`
`14:28.47`	`[TK]D-Fender`	`anthm : And maybe a note to suggest newbies to type "~suggestions" to have JBOT tell them channel policy, etc?`
`14:28.52`	`[TK]D-Fender`	`~amp`
`14:28.54`	`jbot`	`hmm... amp is NOT supported here! People using it should join #freepbx (FreePBX is the new name of AMP)`
`14:28.57`	`*** join/#asterisk dwclarkNU (n=dwclark@129.10.215.24)`
`14:29.14`	`[TK]D-Fender`	`anthm : that note was injected into the channel topic to reduce trolls.`
`14:29.26`	`dwclarkNU`	`is there a way in call queues to periodically play random audio files, such as advertisements?`
`14:29.32`	`[TK]D-Fender`	`anthm : Covered AMP/FreePBX/A@H, etc`
`14:29.45`	`[TK]D-Fender`	`dwclarkNU : Not really random.`
`14:29.46`	`*** join/#asterisk Modcuts (n=bob@82.133.98.155)`
`14:29.55`	`*** join/#asterisk fourcheeze (n=rich@82.153.215.21)`
`14:30.16`	`fourcheeze`	`is there a type of SIP url that includes a person's name to be displayed?`
`14:30.17`	`[TK]D-Fender`	`dwclarkNU : Fixed yes, but I suppose you could cron a symlink change to randomize it, but its an ugly hack.`
`14:30.21`	`dwclarkNU`	`[TK]D-Fender: i know you can do a periodic-announce to play a single message, but i want to change it`
`14:30.25`	`fourcheeze`	`like you can do with email`
`14:30.34`	`anthm`	`with a name like [TK]D-Fender i'd think you'd like amps`
`14:30.57`	`littleball`	`hello, any recomments for the best practice of media relay for sip devices behind firewall?`
`14:31.14`	`[TK]D-Fender`	`anthm : Haven't played with on in YEARS :D All through my PC Speakers / direct effects boards. And my nickj has nothing to do with music actually :)`
`14:31.20`	`BeEpY`	`fourcheeze "blah <sip:192.x.x.x>" ?`
`14:31.49`	`Modcuts`	`I am correct in thinking if you use GSM as a codec if a packet gets dropped the call carrys on? or does it drop?`
`14:31.53`	`BeEpY`	`I have a problem, I have softphones working no problem, and have my 7970 recieving calls without a problem, but when I dial a number, I just an engaged type tone`
`14:32.21`	`dwclarkNU`	`[TK]D-Fender: I think it would be a great feature to incorporate, similar to the random feature with music on hold....have a folder of gsm files and it would randomly sleect one every x seconds`
`14:32.47`	`dwclarkNU`	`BeEpY: what is your dialplan.xml like on ur 7960?`
`14:32.55`	`dwclarkNU`	`*7970`
`14:33.16`	`*** join/#asterisk apardo (n=apardo@87.217.146.52)`
`14:33.20`	`*** join/#asterisk SwK[Work] (n=SwK@64.89.118.139)`
`14:33.39`	`[TK]D-Fender`	`dwclarkNU : Actually what would be better is for it to call a dialplan context and bridge for the announce until an agent is available.`
`14:33.59`	`[TK]D-Fender`	`dwclarkNU : that way you could do all sorts of other logic as well.`
`14:34.08`	`BeEpY`	`dwclarkNU - im not sure how to check? or how to put one ther,e I thought that was my issue.. but it doesnt seem to request dialplan.xml from the tftp server..`
`14:34.18`	`*** join/#asterisk Syrus_ (n=pascal@tahiti.mpl.rullier.net)`
`14:34.43`	`dwclarkNU`	`BeEpY: dumb question, but i must ask...do you have the SIP image on the 7970 and not teh call manage image?`
`14:34.50`	`BeEpY`	`yes`
`14:35.05`	`BeEpY`	`cvm70sip.8-0-1-18.sbn`
`14:35.11`	`BeEpY`	`thats sip, right?`
`14:35.11`	`dwclarkNU`	`[TK]D-Fender: what do you mean by bridge for the announce?`
`14:35.17`	`BeEpY`	`I ahve it logging into asterisk`
`14:35.28`	`BeEpY`	`and can make calls to it`
`14:35.38`	`BeEpY`	`and I can return a call if someone calls me..`
`14:35.41`	`dwclarkNU`	`BeEpY: then yes, that should be it`
`14:35.51`	`dwclarkNU`	`it should be requesting more than just that file though`
`14:35.55`	`*** join/#asterisk nahirean (n=nahirean@unaffiliated/nahirean)`
`14:35.57`	`BeEpY`	`oh it does..`
`14:36.01`	`BeEpY`	`but not dialplan`
`14:36.39`	`*** join/#asterisk esculapio__ (n=elvyn@200.88.44.66)`
`14:36.41`	`BeEpY`	`i've done a factory reset, and its installed everything from the tftp server..`
`14:36.56`	`*** part/#asterisk file (i=jcolp@216.237.114.82)`
`14:37.37`	`[TK]D-Fender`	`dwclarkNU : yES, TEMPORARILY BRIDGE TO A LOCAL CAHNNEL FOR THE ANNOUNCE, AND WHEN THE AGENT ANWERS, DROP THE BRIDGE AND REBRIDGE TO AGENT`
`14:39.54`	`*** part/#asterisk theNOTO (n=biggs@cpe-65-24-200-245.insight.res.rr.com)`
`14:40.00`	`dwclarkNU`	`BeEpY: does it say SIP in teh top right corner of the screen on your phone?`
`14:40.13`	`sevard`	`haha`
`14:40.16`	`sevard`	`caps accident`
`14:40.31`	`BeEpY`	`says Cisco - but I think thats the phone name?`
`14:40.56`	`[TK]D-Fender`	`Oops, produce accident!`
`14:41.41`	`dwclarkNU`	`BeEpY: http://www.danielnylander.se/pics/AUT_0339.JPG`
`14:41.53`	`*** join/#asterisk skeffling (n=chatzill@andrew.1ec.aaisp.net.uk)`
`14:42.24`	`*** join/#asterisk Celery_General (n=chiv@enforcer.solutionip.com)`
`14:42.26`	`sevard`	`a large trout`
`14:42.36`	`sevard`	`!?! CTCP VERSION reply from [TK]D-Fender: mIRC v6.02 Khaled Mardam-Bey`
`14:42.42`	`sevard`	`Dear God :(`
`14:44.01`	`*** join/#asterisk visba (n=dca[lapt@sta-208-139-193-162.rockynet.com)`
`14:44.29`	`Nivex`	`wow, I haven't used mIRC in years.`
`14:44.59`	`[TK]D-Fender`	`sevard : Yes, my child?`
`14:45.14`	`sevard`	`i haven't used mirc in like`
`14:45.17`	`sevard`	`12 years`
`14:46.04`	`Hmmhesays`	`i'm looking for a girl i can fark in my hummer truck, apple bottom jeans and a ...`
`14:47.31`	`sevard`	`fix my CID`
`14:47.32`	`sevard`	`bitches`
`14:47.47`	`blitzrage`	`mirc sux0rz`
`14:47.48`	`r_evolution`	`fix it yourself sevard`
`14:48.13`	`r_evolution`	`etc.`
`14:48.17`	`dwclarkNU`	`BeEpY: you also might want to check what the tftp directory is in the SEP<mac>.cnf.xml file, thats where it would look for the dialplan file`
`14:48.22`	`Hmmhesays`	`hey Katty`
`14:48.58`	`Katty`	`Nivex: :<`
`14:49.10`	`Katty`	`Nivex: are you a mean old man without a mommy?`
`14:49.18`	`Celery_General`	`On a smaller scale.. Running Asterisk 1.2.7.1... when adding the line hanguponpolarityswitch=yes to zapata.conf I'm getting a Warning on load that says it's being ignored...... nothing is overriding it... and I was pretty sure this feature is included in versions >=1.2.x .... is there a line that must be uncommented on compiletime for this feature to work?`
`14:49.27`	`Nivex`	`Katty: uhh, no.`
`14:49.35`	`dwclarkNU`	`BeEpY: that file should also have a <dialTemplate>dialplan.xml</dialTemplate> in it`
`14:49.38`	`Katty`	`Nivex: :>`
`14:49.46`	`Katty`	`[TK]D-Fender: :>`
`14:49.51`	`Katty`	`[TK]D-Fender: how're the eyes?`
`14:49.54`	`Nivex`	`I guess my sense of humor doesn't convey well on IRC`
`14:49.59`	`mercestes`	`......didn't get hugs cries`
`14:50.26`	`Nivex`	`mercestes: You'll get used to it.`
`14:50.26`	`[TK]D-Fender`	`Katty : a little different today. going to take a number of weeks to stabilize I'm told from a friend of mine who did it`
`14:50.40`	`Katty`	`[TK]D-Fender: ah...`
`14:50.42`	`Katty`	`[TK]D-Fender: hang in there (=`
`14:50.53`	`*** join/#asterisk TonyM (n=TonyM@softins.claranet.co.uk)`
`14:51.35`	`sevard`	`you'll like hugs from me`
`14:51.41`	`wunderkin`	`<3`
`14:52.09`	`mercestes`	`....shrugs hugs Sevard`
`14:52.16`	`sevard`	`fag`
`14:52.35`	`*** join/#asterisk [Airwolf] (n=airwolf@83.98.235.219)`
`14:53.23`	`[TK]D-Fender`	`sevard : And get your hands off his ass ;)`
`14:53.28`	`sevard`	`mine!`
`14:53.35`	`Katty`	`there there.`
`14:53.38`	`Katty`	`let's learn to share boys.`
`14:53.51`	`acrg`	`well I fixed the clicking`
`14:54.07`	`r_evolution`	`...`
`14:54.10`	`acrg`	`have to enable "noise cancelation" in the sound drivers, heh`
`14:54.16`	`acrg`	`stupid`
`14:54.17`	`r_evolution`	`well then.`
`14:54.31`	`r_evolution`	`i see the lines of sexuality got blurred when i stopped paying attention`
`14:54.36`	`Katty`	`sevard: ...`
`14:54.39`	`sevard`	`....`
`14:54.40`	`*** join/#asterisk ManxPower (n=ewieling@dpc67142183150.direcpc.com)`
`14:54.44`	`mercestes`	`...`
`14:54.45`	`Katty`	`hiya iDunno (=`
`14:54.47`	`Katty`	`ManxPower: (=`
`14:54.48`	`iDunno`	`woot - today things are mostly working :)`
`14:54.54`	`Katty`	`iDunno: yay!`
`14:55.11`	`ManxPower`	`'morning Katty`
`14:55.42`	`r_evolution`	`ohhh god`
`14:55.45`	`r_evolution`	`i need it to e the 26th.`
`14:55.51`	`ManxPower`	`yxa, the upgrade notes that came with the firmware should have those file listed`
`14:56.01`	`sevard`	`r_evolution: is that when you get your government check`
`14:56.10`	`r_evolution`	`no sir. That's when X-Men comes out`
`14:56.15`	`r_evolution`	`the government doesn't like me very much`
`14:56.24`	`sevard`	`same difference in most communities`
`14:56.25`	`r_evolution`	`They wouldn't give me a check for fear that I'd use it for bad bad things`
`14:56.31`	`ManxPower`	`yxa, and didn't tparcina flood the channel with a list of files for you?`
`14:58.47`	`r_evolution`	`sudden. silence.`
`14:58.50`	`mercestes`	`gah Does the new firmware make polycom's boot slower?`
`14:58.59`	`r_evolution`	`burn.`
`14:59.19`	`Nivex`	`is it possible for a polycom to boot any slower?!`
`14:59.34`	`dwclarkNU`	`Nivex: sure, unplug it`
`14:59.36`	`*** join/#asterisk twisted[asteria] (n=twisted@asterisk/friend-and-developer/pdpc.professional.twisted)`
`14:59.36`	`*** mode/#asterisk [+o twisted[asteria]] by ChanServ`
`14:59.37`	`mercestes`	`Only if it shuts down automatically when power is applied to it.`
`14:59.38`	`r_evolution`	`haha`
`14:59.53`	`*** join/#asterisk myiagy (n=myiagy@mail.voffice.com.br)`
`15:00.31`	`mercestes`	`Bug: It takes a full 2 minutes for the web interface to be available after a polycom successfully boots.`
`15:00.38`	`mercestes`	`Solution: Make the polycom boot procedure last 2 minutes longer.`
`15:00.40`	`mercestes`	`DOH!`
`15:00.50`	`r_evolution`	`I thought we were calling those features these days mercestes?`
`15:02.35`	`Katty`	`asterisk is being mean to me :<`
`15:02.39`	`Katty`	`keeps saying registration failed :<<`
`15:02.48`	`BeEpY`	`dwclarkNU I think I know the issue, ill find out shortly`
`15:02.57`	`BeEpY`	`didnt realised it pulled dialplan on every boot`
`15:03.02`	`dwclarkNU`	`Katty: rm / .`
`15:03.09`	`Katty`	`dwclarkNU: do not fix me, kthx.`
`15:03.19`	`BeEpY`	`dwclarkNU you forgot the -f`
`15:03.23`	`*** join/#asterisk keyhack (n=keyhack@68.236.93.219)`
`15:03.28`	`BeEpY`	`rm / -Rf`
`15:03.30`	`BeEpY`	`;)`
`15:03.31`	`*** join/#asterisk inv_arp[work] (i=junya@c-67-191-62-53.hsd1.fl.comcast.net)`
`15:03.40`	`dwclarkNU`	`:)`
`15:03.41`	`mercestes`	`rm -dvfr`
`15:03.48`	`mercestes`	`it's more verbose.`
`15:03.55`	`mercestes`	`and it looks cool`
`15:03.59`	`*** join/#asterisk salviadud (n=ralfalfa@201.138.132.204)`
`15:04.02`	`Katty`	`what a bunch of weirdos.`
`15:04.03`	`dwclarkNU`	`that way you can see it erasing everything`
`15:04.08`	`mercestes`	`yea`
`15:04.11`	`fourcheeze`	`BeEpY: "blah <sip:192.x.x.x>" doesn't seem to work`
`15:04.19`	`mercestes`	`chown mercestes Katty >.>`
`15:04.21`	`fourcheeze`	`at least not on snoms`
`15:04.22`	`BeEpY`	`fourcheeze was only a suggestion im afraid :(`
`15:04.27`	`*** part/#asterisk twisted[asteria] (n=twisted@asterisk/friend-and-developer/pdpc.professional.twisted)`
`15:04.30`	`fourcheeze`	`yeah, I'm all in favour of those :-)`
`15:05.00`	`Assid`	`anyone here using calleridname agi ?`
`15:05.15`	`brad_mssw`	`yeah`
`15:05.31`	`Assid`	`it works for you?`
`15:05.44`	`mercestes`	`chmod 700 Katty`
`15:05.56`	`mercestes`	`bwhahahaha`
`15:06.00`	`brad_mssw`	`Assid: well, for the most part ... some stuff isn't in 411.com or google.com like cell phone numbers`
`15:06.05`	`*** join/#asterisk vooduhal (n=christop@64.18.101.51)`
`15:06.25`	`Assid`	`brad_mssw: i tried setting my caller id to a number i see in google.. but still doesnt work for me`
`15:06.27`	`Katty`	`mercestes: i don't need to be fixed, kthx.`
`15:06.31`	`Katty`	`mercestes: i just want to complain`
`15:06.35`	`Assid`	`can we pm?`
`15:06.41`	`brad_mssw`	`Assid: sure`
`15:07.06`	`vooduhal`	`Quick question. Using the new syntax for setting CID number, Set(CALLERID(number)=2342342344) causes a timeout. Anyone have any idea why?`
`15:07.27`	`vooduhal`	`SetCIDNum also causes a timeout for me if that helps.`
`15:07.35`	`dwclarkNU`	`vooduhal: * verision?`
`15:07.40`	`Katty`	`yay, it works now.`
`15:07.45`	`vooduhal`	`One sec.`
`15:07.47`	`dwclarkNU`	`*version`
`15:07.51`	`vooduhal`	`1.2.7.1`
`15:08.14`	`Katty`	`it kinda helps if you put an = between type and friend (=`
`15:08.48`	`ManxPower`	`vooduhal, define "timeout"`
`15:09.00`	`vooduhal`	`After a period of time, jumps to t,1`
`15:09.08`	`ManxPower`	`neither application/function even HAS a timeout. You have a problem elsewhere in your dialplan.`
`15:09.21`	`vooduhal`	`May I paste the 5 lines?`
`15:09.28`	`ManxPower`	`put them on pastebin.ca`
`15:09.49`	`*** join/#asterisk abatista (n=Ariel@dsl-20-177.cofs.net)`
`15:10.28`	`vooduhal`	`http://pastebin.ca/index.php`
`15:10.56`	`dwclarkNU`	`we kinda need the pastbin number`
`15:10.57`	`vooduhal`	`Doh.`
`15:11.06`	`*** join/#asterisk cytrak (n=kvirc@adelphi.geofocus.com)`
`15:11.08`	`[TK]D-Fender`	`mercestes : The fact you even USE the web interface is the problem :)`
`15:11.10`	`vooduhal`	`http://pastebin.ca/56589`
`15:11.30`	`vooduhal`	`Sorry, didn't have the URL in the clipboard.`
`15:11.38`	`boddy`	`is there anyone using free codec_g729.so`
`15:11.43`	`boddy`	`?`
`15:11.47`	`[TK]D-Fender`	`vooduhal : Pastebin a call attemt at CLI with it`
`15:12.08`	`vooduhal`	`K`
`15:12.30`	`ManxPower`	`vooduhal, you set the callerid and it no longer matches _81XXX and so everything fails.`
`15:12.32`	`boddy`	`I am trying to patch intell ipp with patch that in www.readytechnology.co.uk`
`15:12.40`	`boddy`	`but patch dosent work`
`15:12.45`	`ManxPower`	`boddy, we don't talk about that stuff here.`
`15:12.52`	`boddy`	`h�mm`
`15:13.08`	`[TK]D-Fender`	`ManxPower : Yeah, that's a neat idea :)`
`15:13.10`	`ManxPower`	`boddy, The IPP stuff does NOT include a license to G729.`
`15:13.26`	`boddy`	`so ?`
`15:13.31`	`boddy`	`what can I do`
`15:13.41`	`[TK]D-Fender`	`boddy : Pay for it like everybody else.`
`15:13.42`	`ManxPower`	`so talking about it would be much like talking about getting unlicensed copies of Microsoft Office.`
`15:13.44`	`vooduhal`	`http://pastebin.ca/56590`
`15:13.53`	`vooduhal`	`Oh...`
`15:14.01`	`mercestes`	`ears perk Unlicensed copies of Office? Where?`
`15:14.12`	`mercestes`	`oh...slinks away]`
`15:14.18`	`vooduhal`	`ManxPower: Let me see if that fixes it.`
`15:14.21`	`*** part/#asterisk dwclarkNU (n=dwclark@129.10.215.24)`
`15:14.31`	`[TK]D-Fender`	`vooduhal : I think what ManxPower said sticks. Your CID no longer matches so there is no longer a matching dialplan line to continue on.`
`15:15.09`	`*** join/#asterisk ssokol (n=ssokol@69.17.122.178)`
`15:15.12`	`[TK]D-Fender`	`vooduhal : Change it so that it verifies the originating number ONCE at the start then continues.`
`15:15.26`	`*** join/#asterisk SplasPood (n=jwb@206.252.198.101)`
`15:15.30`	`MrChimpy`	`hey gang`
`15:15.31`	`ManxPower`	`when you match on callerid it's a good idea to just use the callerid match line to run a Goto and continue from here.`
`15:15.54`	`vooduhal`	`Ah, ok. Let me see if I can fix it with a Goto.`
`15:16.06`	`MrChimpy`	`i'm doing recording through agi... i do an Exec Monitor wav\|file\|md`
`15:16.17`	`MrChimpy`	`i then do a beep to prompt user to leave message`
`15:16.22`	`ManxPower`	`once you have Goto'd a extension that does not do CallerID pattern matching then you don't have to worry about it.`
`15:16.24`	`MrChimpy`	`then do a sleep in perl for 15s`
`15:16.28`	`MrChimpy`	`then beep again`
`15:16.35`	`[TK]D-Fender`	`ManxPower : Actually yeah, thats a better idea in that you can still have it return 404 for non-valid callers and not just hangup.`
`15:16.51`	`MrChimpy`	`the recording comes out missing the 15s audio whilst perl slept, which is what I need!`
`15:17.49`	`cytrak`	`has anyone here used this PC120 one-ear-headset by sennheiser ? I think that is the reason my audio is so bad on a iax client`
`15:17.51`	`*** join/#asterisk Sonderblade (n=muh@host-213.131.147.169.addr.tdcsong.se)`
`15:21.29`	`SplasPood`	`MrChimpy: why would you be using Monitor() rather than.. erm.. what is it.. Record() I forget..`
`15:21.47`	`SplasPood`	`<PROTECTED>`
`15:22.55`	`Faithful`	`anyone know how to get a SPA-941 to register from behind NAT ?`
`15:23.00`	`kay2`	`anyone familiar with sip ?`
`15:23.05`	`cytrak`	`is it possible to tell * to send the voicemail attached to the email and remove it from a new voicemail folder ?`
`15:23.11`	`cytrak`	`or just delete it`
`15:23.12`	`*** join/#asterisk gursikh (n=guriskh1@dsl254-123-245.nyc1.dsl.speakeasy.net)`
`15:23.25`	`BeEpY`	`bah, clarks gone`
`15:23.53`	`MrChimpy`	`just needed an exec wait AGI rather than a perl sleep`
`15:24.19`	`BeEpY`	`my 7970 gives me an "engaged" tone when I try to call out, any ideas? I reckon its the dialplan, but I dont know how to fix it`
`15:24.56`	`r_evolution`	`hey Faithful i never had a problem getting the spa-941 to register from behind a nat`
`15:25.00`	`cytrak`	`nevermind`
`15:25.03`	`cytrak`	`:-)`
`15:25.04`	`r_evolution`	`no more so than anything else behind a nat :)`
`15:25.55`	`*** join/#asterisk syle (n=blah@unaffiliated/syle)`
`15:31.43`	`ManxPower`	`cytrak, you need to read voicemail.conf.sample`
`15:33.59`	`*** part/#asterisk msw (n=msw@rdu-nat.rpath.com)`
`15:35.39`	`BeEpY`	`does anyone know what the .tlv file is for?`
`15:35.58`	`*** join/#asterisk mtaht3 (n=m@207.47.5.58.rev.nextweb.net)`
`15:36.55`	`iDunno`	`I knew today was going too well!`
`15:37.46`	`Makenshi`	`BeEpY, this may be useful for you, http://www.cisco.com/univercd/cc/td/doc/product/voice/c_ipphon/english/ipp7960/addprot/mgcp/frmwrup.htm#wp1047292`
`15:38.22`	`BeEpY`	`hmm, I have 7970`
`15:42.56`	`*** join/#asterisk dwclarkNU (i=dwclarkN@155.33.196.236)`
`15:46.49`	`dwclarkNU`	`BeEpY: figure it out?`
`15:48.02`	`*** join/#asterisk techie (n=gus@adsl-068-209-242-072.sip.mia.bellsouth.net)`
`15:49.51`	`*** part/#asterisk techie (n=gus@adsl-068-209-242-072.sip.mia.bellsouth.net)`
`15:52.37`	`*** join/#asterisk oej (n=oej@apollo.webway.se)`
`15:55.32`	`*** part/#asterisk obiwanmikenolte (n=obiwanmi@mail.efc-intl.com)`
`15:57.49`	`*** join/#asterisk psk (n=psk@golia.caltanet.it)`
`16:00.43`	`*** join/#asterisk twisted[asteria] (n=twisted@asterisk/friend-and-developer/pdpc.professional.twisted)`
`16:00.43`	`*** mode/#asterisk [+o twisted[asteria]] by ChanServ`
`16:01.46`	`*** join/#asterisk chaoscon (n=ph33r@smartserv/ceo/chaoscon)`
`16:03.14`	`BeEpY`	`finnaly got outgoing calls working`
`16:03.29`	`BeEpY`	`problem is when I transfer now, the person im transferring to gets put on hold when I release the call`
`16:04.26`	`Qwell`	`Makenshi: mgcp? gross`
`16:04.53`	`*** join/#asterisk mut (n=animenod@65.111.222.120)`
`16:04.58`	`SplasPood`	`hrm... say I wanted to allow people, while on an outbound call, to hit... *5 and have it mark the CDR record, or otherwise execute a snippet of dialplan so I can know to look into that call`
`16:05.03`	`mut`	`anyone know if lucent plexus telco switches are any good?`
`16:05.04`	`vooduhal`	`Ok, I've almost got my problem solved. One other question. What is the proper syntax for something like GotoIf($[LEN(${CALLERID})=4]:2?4) ?`
`16:05.13`	`SplasPood`	`Anyone know if I can accomplish that?`
`16:05.26`	`SplasPood`	`?2:4`
`16:05.34`	`vooduhal`	`Doh. :)`
`16:05.37`	`Qwell`	`vooduhal: ${CALLERID(num)}`
`16:05.40`	`Qwell`	`(or name)`
`16:05.45`	`SplasPood`	`yea, that too`
`16:07.11`	`vooduhal`	`Oops. Typod. The line I have is exten => s,1,GotoIf($[LEN(${DESTINATION})=4]?2:4) and it always goes to 2.`
`16:07.35`	`*** join/#asterisk wunderkin (i=kev@69.26.192.234)`
`16:07.36`	`Qwell`	`" = " instead of "="`
`16:07.47`	`Qwell`	`and $LEN()`
`16:07.51`	`Qwell`	`erm`
`16:07.52`	`vooduhal`	`Ah, ok.`
`16:07.54`	`Qwell`	`${LEN()}`
`16:07.55`	`*** join/#asterisk pete_l (n=foobar@store-fw.porchlight.ca)`
`16:08.15`	`*** join/#asterisk jake1932 (n=Administ@68.236.22.143)`
`16:08.44`	`jake1932`	`anything wrong with this? exten => s,1,GotoIf($[${RETRYTIMES} > 2]?retry-times-exceeded,s,1)`
`16:08.49`	`Makenshi`	`Qwell, huh?`
`16:08.56`	`vooduhal`	`That fixed it. Thank you.`
`16:09.02`	`jake1932`	`I get May 17 12:04:42 WARNING[27631]: ast_expr2.fl:183 ast_yyerror: ast_yyerror(): syntax error: syntax error, unexpected TOK_GT, expecting TOK_MINUS or TOK_COMPL or TOK_LP or TOKEN; Input:`
`16:09.02`	`jake1932`	`<PROTECTED>`
`16:09.25`	`Qwell`	`jake1932: RETRYTIMES is probably empty`
`16:09.42`	`jake1932`	`Qwell: tnx - i'll check`
`16:10.29`	`jake1932`	`Qwell: you're correct - tnx again`
`16:10.42`	`Qwell`	`bbl`
`16:13.06`	`*** join/#asterisk salviadud (n=ralfalfa@201.138.132.204)`
`16:13.57`	`*** join/#asterisk gmaruzz (n=gmaruzz@217-133-80-112.b2b.tiscali.it)`
`16:14.59`	`*** join/#asterisk brimstone (n=brimston@pdpc/sponsor/digium/brimstone)`
`16:15.37`	`[TK]D-Fender`	`vooduhal : GotoIf($["${LEN(${CALLERID(number)})}"="4"]:2?4)`
`16:16.27`	`pete_l`	`I am upgrading to 1.2.7.1 from and older version. In 1.2.7.1, when app_queue joins the caller and the agent, I don't get a channel jumping to the 'h' extension any more. Is this a bug or a bug fix?`
`16:20.09`	`Sonderblade`	`the tones for busy, dial and callwaiting that sip-phones use are different from the ones i have in analog phones, is there a way asterisk can change which tones sip-phones use?`
`16:20.55`	`[TK]D-Fender`	`Sonderblade : * has nothing to do with what the user experiences with a SIP phone. Its up to the phone.`
`16:21.18`	`[TK]D-Fender`	`Sonderblade : So for instance you may get North American style tones where you'd be used to tones for another region.`
`16:21.50`	`Sonderblade`	`[TK]D-Fender: yeah,`
`16:21.52`	`[TK]D-Fender`	`Sonderblade : Different phone have varying degress of conttrol over the "internationalization" of these things`
`16:22.07`	`[TK]D-Fender`	`Sonderblade : Check the documentation for whatever it is that you have.`
`16:22.20`	`Sonderblade`	`[TK]D-Fender: i haven't found any phones that have i18n ringtones support`
`16:22.53`	`[TK]D-Fender`	`Sonderblade : Thats a text conversion standard isn't it? Not necessarily a raw country code.`
`16:23.44`	`Sonderblade`	`i18n is an abbrevation for internationalization`
`16:24.12`	`*** join/#asterisk salviadud (n=ralfalfa@201.138.132.204)`
`16:25.12`	`*** join/#asterisk gcarrillog (n=gcarrill@201.152.19.192)`
`16:26.21`	`Sonderblade`	`i wonder why voip is so hyped when even getting simple things like the tone frequences right is so hard :/`
`16:27.27`	`[TK]D-Fender`	`Sonderblade : NEver said it was hard, depends on your phone, what are you using?`
`16:28.23`	`cytrak`	`is it possible to setup a menu that has a Goto to another context and then once that context is done it just goes back to the next line priority of the original context where the Goto was called from ?`
`16:29.20`	`salviadud`	`the "other context" would have to have a goto to the original context on the next priority`
`16:29.36`	`cytrak`	`salviadud: yeah I didn't want to do that`
`16:30.17`	`*** join/#asterisk iPBX (n=owned@68-169-204-147.agstme.adelphia.net)`
`16:32.19`	`iPBX`	`what's the a@h channel?`
`16:32.28`	`brettnem`	`hey, how does one see RFC2833 DTMFs in tethereal?`
`16:32.55`	`[TK]D-Fender`	`cytrak : Gosub <-`
`16:32.59`	`brettnem`	`er rather ethereal`
`16:33.06`	`[TK]D-Fender`	`~amp`
`16:33.07`	`jbot`	`amp is, like, NOT supported here! People using it should join #freepbx (FreePBX is the new name of AMP)`
`16:33.11`	`[TK]D-Fender`	`iPBX : there`
`16:34.21`	`brettnem`	`anyone RFC2833?`
`16:35.09`	`brettnem`	`quiet group today`
`16:35.35`	`salviadud`	`Gosub?`
`16:35.39`	`salviadud`	`never heard of that one...`
`16:35.43`	`Ahrimanes`	`it's dinnertime.. sssh`
`16:35.56`	`*** join/#asterisk nagl (n=nagl@rih.zid-nw.wu-wien.ac.at)`
`16:36.12`	`brettnem`	`anyone know if it's possible to see RFC2833 DTMFs in a capture with ethereal?`
`16:37.02`	`iPBX`	`brettnem, the answer is yet... you just have to know what HEX data to look for`
`16:37.15`	`*** join/#asterisk \|dennis\| (i=dennis@200.32.215.84)`
`16:37.28`	`brettnem`	`iPBX, any ideas how to do this?`
`16:37.52`	`iPBX`	`nope :-)`
`16:37.59`	`brettnem`	`I thought the payload type was different for RFC2833 packets`
`16:38.14`	`*** join/#asterisk Qwell[] (i=north@unaffiliated/qwell)`
`16:39.12`	`[TK]D-Fender`	`cytrak : Gotta keep up to date on the new commands and functions...`
`16:39.32`	`brettnem`	`[TK]D-Fender: do you know how to view RFC2833 DTMFs in ethereal?`
`16:40.35`	`cytrak`	`[TK]D-Fender: I guess that's what I'm realizing now ... I got ano reilly book that I got when 2.x was just comming out`
`16:40.55`	`cytrak`	`the voip-info is up to date ?`
`16:41.02`	`cytrak`	`or new book out ?`
`16:41.03`	*** join/#asterisk Lino` (n=Lino@i577BF011.versanet.de)
`16:41.10`	`salviadud`	`voip-info`
`16:41.11`	`*** join/#asterisk W4 (n=W4@host-195-82-106-225.dynamic.mailbox.co.uk)`
`16:41.19`	`salviadud`	`i'm reading about Gotosub right now`
`16:41.31`	`salviadud`	`i mean, gosub`
`16:43.04`	`sevard`	`goatse?`
`16:43.19`	`[TK]D-Fender`	`Opps, slipped AGAIN!`
`16:43.28`	`Hmmhesays`	`is there a config tool for exim4?`
`16:46.37`	`vooduhal`	`Ok, fixed that problem. Does anyone know when function AGENT was added? I'm running 1.2.7.1 but it doesn't seem to be registered.`
`16:47.01`	`*** join/#asterisk vechers (n=103326C9@64.61.117.138)`
`16:47.23`	`vooduhal`	`And is there an easy way to get an agent name other than AGENT?`
`16:48.48`	`*** join/#asterisk C4T3l (n=rcall01@216.54.143.2)`
`16:48.55`	`cytrak`	`guess no one knows a nice 2006 asterisk book ?`
`16:49.11`	`Qwell[]`	`cytrak: wait for 1.4 to come out`
`16:49.18`	`tzanger`	`cytrak: the asterisk book just came out in 2005`
`16:49.19`	`tzanger`	`so no`
`16:49.21`	`Qwell[]`	`or look at TFOT`
`16:49.26`	`Qwell[]`	`~thebook`
`16:49.27`	`jbot`	`thebook is probably somebody said thebook was Asterisk: The Future of Telephony, released under a Creative Commons license and available at http://www.asteriskdocs.org << Meet Jim Van Meggelen at Cluecon http://www.cluecon.com`
`16:50.04`	`blitzrage`	`hey`
`16:50.21`	`Qwell[]`	`Meet Leif Madsen on irc!`
`16:50.36`	`mut`	`:O`
`16:50.42`	`mut`	`where!?!>?`
`16:50.49`	`Qwell[]`	`mut: Pay me, and I'll tell you`
`16:50.54`	`r_evolution`	`haha`
`16:50.57`	`Qwell[]`	`he may (or may not) already be here!`
`16:51.03`	`blitzrage`	`can I do UPDATE table SET field=field+1; in PostgreSQL ?`
`16:51.08`	`mut`	`anything just tell meee!!!!!!!!!!!!!11eleven`
`16:51.12`	`Qwell[]`	`asking a nubish question :p`
`16:51.16`	`blitzrage`	`lol`
`16:51.17`	`Qwell[]`	`blitzrage: think so`
`16:51.18`	`dlynes_home`	`~seen ciber311`
`16:51.24`	`jbot`	`ciber311 <n=Ciber@user-1087e94.cable.mindspring.com> was last seen on IRC in channel #asterisk, 10d 14h 50m 31s ago, saying: 'well afk a bit'.`
`16:51.24`	`r_evolution`	`Leif Madsen's alter-ego = Qwell[]`
`16:51.28`	`blitzrage`	`Qwell[]: scwheet :)`
`16:51.29`	`Qwell[]`	`r_evolution: not quite`
`16:51.32`	`r_evolution`	`shhh`
`16:51.43`	`Qwell[]`	`~seen ljam`
`16:51.45`	`jbot`	`ljam <n=blitzrag@12.174.37.165> was last seen on IRC in channel #asterisk-doc, 34d 12h 42m 10s ago, saying: 'jsmith: thanks again! night!'.`
`16:53.32`	`vooduhal`	`So anyone have an idea how to get an agent name without the AGENT function?`
`16:53.39`	`blitzrage`	`nada`
`16:53.40`	`*** join/#asterisk [Airwolf] (n=airwolf@83.98.235.219)`
`16:53.47`	`blitzrage`	`check 'show applications' and README.variables`
`16:54.27`	`*** join/#asterisk oej (n=oej@apollo.webway.se)`
`16:54.29`	`*** join/#asterisk Vorondil (n=jkiffmey@miro.voltaiccommerce.com)`
`16:54.36`	`*** part/#asterisk Vorondil (n=jkiffmey@miro.voltaiccommerce.com)`
`16:54.51`	`[TK]D-Fender`	`blitzrage : Your SQL is pretty spot-on.`
`16:54.55`	`[TK]D-Fender`	`blitzrage : ! ! !`
`16:55.17`	`blitzrage`	`[TK]D-Fender: excellent -- ! ! !`
`16:55.35`	`blitzrage`	`[TK]D-Fender: I could have done that to some of the chicks at beach volleyball on Monday... yowza`
`16:56.00`	`*** join/#asterisk DrRighteous (n=DrRighte@ool-457843d1.dyn.optonline.net)`
`16:56.00`	`cytrak`	`that the book I a;ready have ... out dated commands !`
`16:56.05`	`cytrak`	`oh well`
`16:56.20`	`Qwell[]`	`cytrak: contribute updated samples for 1.4`
`16:56.24`	`r_evolution`	`hey cytrak... you did download the pdf right? i think it's a little more updated than the actual printed one`
`16:56.38`	`blitzrage`	`depends which printing you get -- there have been 5`
`16:56.48`	`r_evolution`	`O_o`
`16:56.52`	`blitzrage`	`probably more-so now`
`16:57.17`	`*** join/#asterisk adker (n=adker@67-136-210-63.dsl1.glv.ny.frontiernet.net)`
`16:57.28`	`brettnem`	`:(`
`16:57.37`	`[TK]D-Fender`	`blitzrage : I took up VB @ the Y, as well as a martial arts course. Not so much socializing at VB, but I'm eyeing some prospects on the martial arts side :)`
`16:57.56`	`*** join/#asterisk MikeJ__ (n=vircuser@d14-69-8-30.try.wideopenwest.com)`
`16:58.06`	`blitzrage`	`[TK]D-Fender: careful -- they might be able to kick your ass :)`
`16:58.10`	`Qwell[]`	`VB? newb`
`16:58.26`	`blitzrage`	`volleyball -- not visual basic :)`
`16:58.28`	`blitzrage`	`nerd`
`16:58.30`	`r_evolution`	`;x`
`16:58.30`	`Qwell[]`	`:p`
`16:59.00`	`Qwell[]`	`missed me`
`16:59.04`	`cytrak`	`sevard: where are you reading the commands from ? voip-info or asteriskdocs ?`
`16:59.27`	`blitzrage`	`all the commands are in the CLI -- just use that`
`16:59.38`	`brettnem`	`ok so really.. someone must be able to identify rfc2833 packets with etehreal`
`16:59.51`	`cytrak`	`sorry don't mean the commads I mean the dialplan commands`
`16:59.54`	`blitzrage`	`brettnem: yah -- ethereal can :)`
`16:59.59`	`Qwell[]`	`cytrak: show applications`
`17:00.00`	`brettnem`	`blitzrage: what do they look like?`
`17:00.01`	`sevard`	`cytrak: WHO WHATA`
`17:00.04`	`blitzrage`	`cytrak: I know -- 'show applications'`
`17:00.15`	`blitzrage`	`brettnem: its in the RTP stream`
`17:00.21`	`sevard`	`cytrak: why are you talkin to me`
`17:00.30`	`brettnem`	`blitzrage: right, I'm looking at RTP.. does ethereal show them as a different packet type?`
`17:00.45`	`blitzrage`	`brettnem: no -- it's carried in RTP, you have to open up the packet`
`17:00.56`	`cytrak`	`sevard: sorry wron nick`
`17:01.01`	`brettnem`	`blitzrage: ok, so how do I search for rfc2833 data?`
`17:01.11`	`sevard`	`cytrak: the person you're talking to's nick doesn't even start with an 's'`
`17:01.13`	`blitzrage`	`brettnem: no idea`
`17:01.14`	`brettnem`	`blitzrage: I have 55,000 packets to sort through`
`17:01.16`	`brettnem`	`doh`
`17:01.18`	`brettnem`	`!`
`17:01.21`	`blitzrage`	`brettnem: enjoy :D`
`17:01.46`	`sevard`	`Ennnnnjoy!`
`17:02.43`	`[TK]D-Fender`	`<blitzrage> [TK]D-Fender: careful -- they might be able to kick your ass :) <- BONUS!!!`
`17:03.00`	`blitzrage`	`[TK]D-Fender: I'd agree with that :)`
`17:03.06`	`*** join/#asterisk generalhan (i=general_@ip67-90-64-2.z64-90-67.customer.algx.net)`
`17:03.17`	`generalhan`	`whats up all`
`17:03.19`	`[TK]D-Fender`	`blitzrage : Actually grace is a real attential getter with me.`
`17:03.41`	`*** join/#asterisk krisguy (n=krisguy@h216-170-039-057.adsl.navix.net)`
`17:03.41`	`[TK]D-Fender`	`blitzrage : You can tell things about people from the way they handle a blade :)`
`17:03.47`	`blitzrage`	`:D`
`17:04.14`	`gcarrillog`	`hi!`
`17:04.17`	`[TK]D-Fender`	`Can't wait till I'm cleared to actually bring my own iaito to dojo`
`17:04.39`	`gcarrillog`	`i need configure my linksys pap2 with asterisk`
`17:04.45`	`*** join/#asterisk UlbabraB (n=UlbabraB@host241-43.pool8172.interbusiness.it)`
`17:04.46`	`generalhan`	`can some one shoot me out some troubleshooting suggestions for a permission denial for moving a .call file to /asterisk/outgoing`
`17:04.47`	`gcarrillog`	`someone have an url?`
`17:05.07`	`r_evolution`	`giant cane?`
`17:05.16`	`blitzrage`	`gcarrillog: sounds like you're trying to move a file into a dir you don't have permission to write to`
`17:05.16`	`[TK]D-Fender`	`r_evolution : GONG!`
`17:05.16`	`r_evolution`	`the day I see a big stick walking on it's own`
`17:05.19`	`r_evolution`	`is the day i commit myself`
`17:05.20`	`r_evolution`	`ahh`
`17:05.31`	`*** join/#asterisk W4 (n=W4@host-195-82-106-225.dynamic.mailbox.co.uk)`
`17:05.43`	`generalhan`	`i have a perl script to generate a .call file (which it does) but when the script tries to move the file to the directory im getting permission denied in the error_logs`
`17:06.05`	`*** join/#asterisk scubes13 (n=klanders@cpe-071-068-198-068.sc.res.rr.com)`
`17:06.18`	`brettnem`	`that isn't; an asterisk problem`
`17:06.34`	`generalhan`	`it's kinda an asterisk question`
`17:06.36`	`scubes13`	`would this be the place for a question in regards to asterisk@home, or is there another channel?`
`17:06.39`	`Qwell[]`	`~amp`
`17:06.40`	`jbot`	`i heard amp is NOT supported here! People using it should join #freepbx (FreePBX is the new name of AMP)`
`17:07.00`	`[TK]D-Fender`	`Ops, please! Throw me a friggen bone here! ;)`
`17:07.31`	`vooduhal`	`Ok, I'm lost. According to http://www.voip-info.org/wiki/view/Asterisk+functions AGENT should exist in 1.2.7.1 but I'm not sure that it does.`
`17:07.37`	`r_evolution`	`i've come to the conclusion lately that jbot actually knows more than any of us`
`17:07.47`	`blitzrage`	`damnit... why does clustering Asterisk have to be so hard :)`
`17:07.50`	`brettnem`	`generalhan: you have a perl script moving a text file.. what does that have to do with asterisk`
`17:07.57`	`*** join/#asterisk ToyMan (n=stuq@74-32-76-147.dsl1.mdl.ny.frontiernet.net)`
`17:07.57`	`brettnem`	`because asterisk sux`
`17:08.15`	`blitzrage`	`vooduhal: are you loading chan_agent.so ?`
`17:08.25`	`blitzrage`	`I'd guess that module is in chan_agent... but not 100% sure`
`17:08.50`	`generalhan`	`brettnem: its not moving a text file ... more specifically its moving a .call file which is an asterisk thing. so if im having issues moving it ... maybe some one else has had the same problem and can help me out`
`17:08.53`	`vooduhal`	`Had to double check, but yes.`
`17:08.59`	`mut`	`OMG OMG OMG I FOUND Leif Madsen!!`
`17:09.06`	`Qwell[]`	`mut: did not`
`17:09.06`	`tzanger`	`where??`
`17:09.14`	`blitzrage`	`where?! I want his autograph`
`17:09.14`	`tzanger`	`GRAB YOUR PITCHFORKS AND TORCHES!`
`17:09.22`	`blitzrage`	`I heard he gets all the hot chicks`
`17:09.29`	`Qwell[]`	`blitzrage: He's a nub. He didn't want me to sign his book :D`
`17:09.31`	`brettnem`	`generalhan: your .call file is nothing but a text file.. the contents are irrelevant..check the directory permissions this is a file system problem`
`17:09.39`	`mut`	`anyone seen grandmas boy?`
`17:09.48`	`mut`	`he kinda looks like that dude with the black jacket`
`17:09.49`	`tzanger`	`blitzrage: yeah there's a lot of incorrect rumours about that guy`
`17:09.54`	`blitzrage`	`tzanger: lol`
`17:09.56`	`Qwell[]`	`of course, at the time, he didn't know who I was, but that's beside the point`
`17:09.59`	`vooduhal`	`Any other ideas?`
`17:10.15`	`websae`	`blitrage: I am going to order a few polycoms today are you sure you doin't want me to get you one?`
`17:10.19`	`generalhan`	`brettnem: if you dont want to help thats fine, but it makes sense to me to ask people with the same application and function how to help me solve an issue.`
`17:10.28`	`generalhan`	`ill ask elsewhere`
`17:10.29`	`Qwell[]`	`websae: You can send me his`
`17:10.46`	`brettnem`	`generalhan: I'm pretty sure I told you what to do to fix your problem in my last message`
`17:10.52`	`blitzrage`	`this is going ot be interesting... I have to keep track of the number of simultaneous calls for a user... so I have to keep track of it all in the DB -- I guess I need to do my decrementing in the 'h' extension....`
`17:10.59`	`websae`	`Qwell: haha, for one smale fee lol`
`17:11.04`	`websae`	`*small`
`17:11.14`	`Qwell[]`	`websae: free IRC support? :P`
`17:11.17`	`tzanger`	`blitzrage: heh`
`17:11.31`	`*** join/#asterisk ghenry (n=ghenry@mail.suretecsystems.com)`
`17:11.32`	`*** join/#asterisk pete_l (n=ploeppky@store-fw.porchlight.ca)`
`17:11.38`	`websae`	`Contingent of me being available`
`17:11.41`	`blitzrage`	`tzanger: the reason it needs to be in the DB is so that other boxes know the values too....`
`17:11.47`	`blitzrage`	`weeee`
`17:12.00`	`Qwell[]`	`blitzrage: can't use the cdrs?`
`17:12.04`	`tzanger`	`blitzrage: yep I know what you're saying`
`17:12.07`	`tzanger`	`NO DO NOT TRUST CDRs`
`17:12.13`	`blitzrage`	`apparently not then :)`
`17:12.13`	`tzanger`	`they are inconsistent`
`17:12.22`	`blitzrage`	`I don't use CDRs in asterisk anyways`
`17:12.32`	`tzanger`	`you can't track htem in realtime because the CDR isn't written utnil the call is gone`
`17:12.32`	`blitzrage`	`I need to check before I setup a call for someone anyways`
`17:12.38`	`blitzrage`	`exactly :)`
`17:12.48`	`tzanger`	`and if you start mucking with forkcdr and resetcdr you end up with a hopelessly useless cdr`
`17:13.05`	`blitzrage`	`yah... I think using func_odbc to write to a column in the DB will be easier...`
`17:13.23`	`hayburn`	`anyone here using ZapRAS to dynamically allowcate PRI voice channels?`
`17:13.32`	`hayburn`	`allocate heh`
`17:14.11`	`znoG`	`anyone ever admin'ed a Lucent Definity PBX?`
`17:14.32`	`blitzrage`	`tzanger: int2, int4, int8 -- number of bits or bytes?`
`17:15.02`	`blitzrage`	`2048, 4096, 8192 bits?`
`17:15.12`	`blitzrage`	`which still doesn't tell me how many digits, lol`
`17:15.43`	`tzanger`	`bytes`
`17:15.54`	`tzanger`	`int2 typically called word`
`17:15.57`	`tzanger`	`int4 = dword`
`17:15.59`	`tzanger`	`int8 = qword`
`17:16.05`	`tzanger`	`8/16/32/64 bits`
`17:16.37`	`blitzrage`	`what size of numbers can I get with those?`
`17:18.47`	`vooduhal`	`When an agent is paused, will it unpause itself after a certain period?`
`17:18.53`	`Qwell[]`	`vooduhal: no`
`17:19.46`	`vooduhal`	`K. Just making sure. We keep having users who aren't paused and think they are.`
`17:20.03`	`mut`	`anyone heard any good/bad/ugly about santera telcom switches?`
`17:20.21`	`*** join/#asterisk TonyM (n=TonyM@softins.claranet.co.uk)`
`17:21.47`	`*** join/#asterisk jsaunders (i=jsaunder@S01060060971c5817.va.shawcable.net)`
`17:23.43`	`mut`	`i killed the chan`
`17:23.45`	`mut`	`argh`
`17:25.43`	`*** part/#asterisk scubes13 (n=klanders@cpe-071-068-198-068.sc.res.rr.com)`
`17:25.45`	`*** join/#asterisk MstlyHrmls (n=mh@melbourne.mostly-harmless.ca)`
`17:25.54`	`*** join/#asterisk techie (n=gus@adsl-068-209-242-072.sip.mia.bellsouth.net)`
`17:29.01`	`distortion`	`david does this ani ring a bell: 2129810449?`
`17:29.38`	`distortion`	`& /m`
`17:35.29`	`*** join/#asterisk jeffgus (n=jeffgus@greengables.zimage.com)`
`17:36.35`	`iPBX`	`hi, i have a 'regular' linux problem... plz don't redirect me to another channel because of what I'm trying to install, just looking for help... I'm installing a@h from the ISO image (bootable CD). I burned the CD and booted with it... after it says Loading vmlinuz.......... Loading initrd.img................ then it reboots....`
`17:36.53`	`iPBX`	`i've tried reburning the CD, tried new RAM, new CDrom drive...`
`17:37.02`	`iPBX`	`defaulting the bios...`
`17:37.03`	`blitzrage`	`iPBX: a@h help is in #freepbx`
`17:37.29`	`iPBX`	`i asked my question there too... I think this is just a general pc / linux question though`
`17:37.36`	`blitzrage`	`then you want #linux`
`17:37.52`	`mut`	`##linux`
`17:37.58`	`Assid`	`iPBX: eiother the disk is bad.. OR you may wanna check the ram`
`17:37.59`	`Qwell[]`	`###linux`
`17:38.05`	`iPBX`	`i was betting someone here was experienced enough about linux that they might be able to help`
`17:38.09`	`Assid`	`you could also check the drive boot sector.. and rom`
`17:38.25`	`Assid`	`but ##linux would be your best bbet`
`17:38.36`	`Nugget`	`We're not here to help you learn how to use your operating system.`
`17:38.49`	`Nugget`	`There are countless resources online which can help you with that`
`17:38.55`	`Assid`	`Nugget: thats pre OS`
`17:39.03`	`Assid`	`initrd .. not even at the kernel`
`17:39.25`	`Nugget`	`it's still linux and not asterisk.`
`17:39.29`	`Assid`	`yep`
`17:39.41`	`Nugget`	`(which qualifies as OS if you ask me)`
`17:39.47`	`blitzrage`	`doh... I hate logic issues... I have to keep track of the number of sim calls on multiple systems in one place, but when it gets implemented, its going to be live, so there might already be channels in use.. which means if I decrease when the DB thinks it's all at zero, then I'll end up with negative values....`
`17:39.50`	`vooduhal`	`Ok, stupid question this time. Isn't there an option in queues.conf for a queue to append something to the callerid name of an incoming call on the queue?`
`17:40.06`	`Assid`	`vooduhal ?`
`17:40.10`	`vooduhal`	`Yes.`
`17:40.12`	`dwclarkNU`	`vooduhal: you can do that in extensions.conf`
`17:40.13`	`Assid`	`what?`
`17:40.25`	`ManxPower`	`vooduhal, change the caller id before the call hits the queue`
`17:40.30`	`dwclarkNU`	`vooduhal: before you throw it in the queue`
`17:40.42`	`blitzrage`	`anyone know of a good way of getting variable values from remote asterisk systems?`
`17:40.45`	`vooduhal`	`Yes, but I thought there was something already in place to provide for this.`
`17:40.51`	`*** join/#asterisk brodiem (i=1000@cpe-66-69-222-36.austin.res.rr.com)`
`17:41.07`	`*** join/#asterisk flujan (n=flujan@internet.nube.com.br)`
`17:41.30`	`flujan`	`i'm trying to configure a te406p`
`17:41.42`	`flujan`	`i put the following lines in the zaptel.conf`
`17:41.54`	`blitzrage`	`don't post more thank 3 lines`
`17:41.56`	`flujan`	`span=1,0,0,cas,ami`
`17:41.56`	`flujan`	`fxsks=1-10`
`17:41.56`	`flujan`	`fxoks=11-30`
`17:41.59`	`blitzrage`	`:)`
`17:42.01`	`blitzrage`	`lol`
`17:42.11`	`flujan`	`blitzrage, lol`
`17:42.22`	`brodiem`	`I'm trying to set an alternate attachment format in voicemail.conf but ONLY for a specific user (i.e. wav49 for all w/ exception of wav for one vm user). I tried stringing along "\|format=wav" as a user option on the vm user, as well as creating a new context specifying format=wav followed by the vm user that shoudl use this format to no avail. Any suggestions?`
`17:42.38`	`znoG`	`maaan i wish i had the money to buy decent hardware to integrate a Lucent Definity with Asterisk`
`17:42.40`	`[TK]D-Fender`	`blitzrage : AMI into that system`
`17:42.46`	`flujan`	`I'm receiving the following error:`
`17:42.47`	`flujan`	`ZT_SPANCONFIG failed on span 1: Invalid argument (22)`
`17:42.54`	`blitzrage`	`[TK]D-Fender: ahhh... yah, I guess that's how I'd have to do it...`
`17:42.54`	`znoG`	`i have to do weird stuff like using a TDM2400 card to connect them using analog`
`17:43.06`	`blitzrage`	`[TK]D-Fender: but these systems aren't local :(`
`17:43.26`	`[TK]D-Fender`	`blitzrage : What makes it challenging? Can't port forward ccess to it?`
`17:43.43`	`*** join/#asterisk marl (n=matt@albacom.plus.com)`
`17:44.13`	`[TK]D-Fender`	`blitzrage : And I use "brute-force" style AMI calls with the CLI functionality.`
`17:44.39`	`[TK]D-Fender`	`blitzrage : Though actually when you think of it I wouldn't be referring so mush to variables as I would ASTDB values.`
`17:44.50`	`*** join/#asterisk protocoldoug (n=doug@69-160-165-210.sbtnvt.adelphia.net)`
`17:45.36`	`flujan`	`i already search in google for this error message without success.`
`17:45.39`	`flujan`	`Any ideas?`
`17:45.51`	`ManxPower`	`brodiem, I don't know if you can even do that.`
`17:46.11`	`RevSlowmo`	`[TK]D-Fender: Remember me from last night, sorry I ran off but you noted I had to contexts going on... Well have simplified my zapata.conf to just 28 lines. Could you look over it and note any errors. http://pastebin.com/723017`
`17:46.13`	`ManxPower`	`florz, that means that the hardware does not match your /etc/zaptel.conf config file`
`17:46.42`	`*** join/#asterisk PakiPenguin (n=Junaid@linuxpakistan/admin/pakipenguin)`
`17:47.01`	`PakiPenguin`	`hello everyone`
`17:47.32`	`PakiPenguin`	`i'd like to ask about voice activated menus , has anyone done those with asterisk , like customer says Sales and the call is forwarded to the sales queue`
`17:47.57`	`brodiem`	`ManxPower guess I have to switch to wav instead of wav49 =/`
`17:48.46`	`docelmo`	`any anyone know any issues with running CVS HEAD Jan05 against 1.2.7.1? I have someone trying to do it and I keep getting malformed packet issues`
`17:49.06`	`*** part/#asterisk techie (n=gus@adsl-068-209-242-072.sip.mia.bellsouth.net)`
`17:50.37`	`[TK]D-Fender`	`RevSlowmo : http://pastebin.com/723025`
`17:50.42`	`RevSlowmo`	`k`
`17:50.47`	`x86`	`RevSlowmo: ?`
`17:50.53`	`x86`	`RevSlowmo: whats up man?`
`17:51.36`	`RevSlowmo`	`x86: Setup my *`
`17:54.56`	`Assid`	`err.. anyone know a decent provider for < 1.5c/min ?`
`17:54.59`	`Assid`	`or around`
`17:55.02`	`Assid`	`besides voipjet..`
`17:55.12`	`dwclarkNU`	`Assid: country?`
`17:55.12`	`docelmo`	`ya`
`17:55.13`	`docelmo`	`me`
`17:55.21`	`Assid`	`mostly US`
`17:55.30`	`docelmo`	`How many minutes?`
`17:55.30`	`dwclarkNU`	`Assid: minutes / month?`
`17:55.37`	`docelmo`	`haha`
`17:55.43`	`dwclarkNU`	`i want the customer`
`17:55.45`	`dwclarkNU`	`lol`
`17:55.55`	`docelmo`	`Who are you? or who do you represent?`
`17:56.10`	`RevSlowmo`	`[TK]D-Fender: Ok I see the changes, didnt help my problem.. Its like it trying to detect something, but what i couldnt tell you..`
`17:56.12`	`*** join/#asterisk gmaruzz (n=gmaruzz@217-133-80-112.b2b.tiscali.it)`
`17:56.58`	`*** join/#asterisk Alex (i=hauntedu@gentoo/user/alex)`
`17:57.02`	`*** join/#asterisk PakiPenguin (n=Junaid@linuxpakistan/admin/pakipenguin)`
`17:57.07`	`Alex`	`Afternoon, all.`
`17:57.10`	`PakiPenguin`	`Hello All`
`17:58.03`	`[TK]D-Fender`	`RevSlowmo : Not sure where to go next.`
`17:58.27`	`RevSlowmo`	`[TK]D-Fender: http://pastebin.com/723035 Verbose output of a call that I pickup first.`
`17:58.44`	`jake1932`	`PakiPenguin: there's nothing native to asterisk`
`17:58.55`	`Alex`	`Hey PakiPenguin :) Long time no see.`
`17:59.01`	`PakiPenguin`	`hey Alex`
`17:59.04`	`PakiPenguin`	`yeah been busy`
`17:59.08`	`PakiPenguin`	`jake1932, any pointers?`
`17:59.24`	`jake1932`	`PakiPenguin: sphynx ?`
`17:59.26`	`dlynes_office`	`Just curious how many blf's the polycom 501's can support?`
`17:59.26`	`*** join/#asterisk DrPete (n=Pete@host-84-9-255-194.bulldogdsl.com)`
`17:59.36`	`jake1932`	`PakiPenguin: i think MS has a speech server too`
`17:59.47`	`*** join/#asterisk ikey (i=ikey@220.226.8.225)`
`18:00.06`	`*** join/#asterisk scubes13 (n=klanders@cpe-071-068-198-068.sc.res.rr.com)`
`18:00.18`	`*** join/#asterisk tzafrir_laptop (n=tzafrir@bzq-88-154-12-25.red.bezeqint.net)`
`18:00.20`	`[TK]D-Fender`	`RevSlowmo : Well your context doesn't exist, but there is a 7 second wait executed like it should. did you pick it up during the 2nd ring on that other phone?`
`18:00.41`	`RevSlowmo`	`[TK]D-Fender: Yes, matter of fact 1st ring.`
`18:00.52`	`[TK]D-Fender`	`dlynes_office : No "lights" per-se, but 2 indicators on screen, and 7-8 in the buddy window`
`18:00.57`	`jake1932`	`PakiPenguin: speechworks`
`18:01.08`	`x86`	`RevSlowmo: mmk`
`18:01.16`	`[TK]D-Fender`	`RevSlowmo : So you sat and watched * wait the 7 seconds and it followed through to pick up anyways?`
`18:01.25`	`RevSlowmo`	`[TK]D-Fender: Yes`
`18:01.30`	`vooduhal`	`Ok, another stupid qustion. I have a variable set to "Firstname Lastname" but when I Set(CALLERID(name)=${MYVAR}) it sets it to the firstname only. What am I missing?`
`18:01.35`	`stoffell`	`is it possible to assign extensions 999 (for example) to a specific polycom key? (I've read on redefining keys, but only works for built-in functions?)`
`18:01.38`	`[TK]D-Fender`	`RevSlowmo : Good frigegn grief`
`18:02.08`	`jake1932`	`vooduhal: worded like a word problem?`
`18:02.16`	`x86`	`RevSlowmo: what are you doing with asterisk?`
`18:02.20`	`PakiPenguin`	`<PROTECTED>`
`18:02.23`	`vooduhal`	`jake1932: ?`
`18:02.26`	`PakiPenguin`	`hjeya x86 :)`
`18:02.28`	`[TK]D-Fender`	`stoffell : Not as far as anything I've said indicates. You can rearrange functions but not dials.`
`18:02.36`	`jake1932`	`vooduhal: cli output?`
`18:02.43`	`vooduhal`	`Ok.`
`18:02.53`	`RevSlowmo`	`x86: Making a ans machine will mail boxes.`
`18:02.53`	`*** join/#asterisk fjean (n=fjean@201.29.140.206)`
`18:02.55`	`[TK]D-Fender`	`stoffell : Let me guess.... parking?`
`18:02.58`	`RevSlowmo`	`err with`
`18:03.03`	`jake1932`	`PakiPenguin: yes - but don't think it's cheap`
`18:03.09`	`x86`	`PakiPenguin: hey man`
`18:03.14`	`PakiPenguin`	`jake1932, i was looking for something free :)`
`18:03.16`	`x86`	`RevSlowmo: did you see the example?`
`18:03.26`	`stoffell`	`[TK]D-Fender, okay, thanks. well, no.. would like to add a shortcut to a menu that announces the user's status (user logged in to that phone or not)`
`18:03.27`	`vooduhal`	`What's the url to post code again?`
`18:03.27`	`jake1932`	`haha - speech... free .. lol`
`18:03.46`	`RevSlowmo`	`x86: Well I followed one.`
`18:03.48`	`x86`	`PakiPenguin: if you want free speech recognition, you need Sphinx`
`18:03.53`	`[TK]D-Fender`	`stoffell : You can set the "messages" button for that then. its the only one.`
`18:04.14`	`[TK]D-Fender`	`stoffell : Configure the phone for 1-touch voicemail and set the contact on it.`
`18:04.14`	`PakiPenguin`	`x86, any idea if it works with asterisk :)`
`18:04.21`	`stoffell`	`[TK]D-Fender, hm, that means I lose the MWI, right?`
`18:04.34`	`vooduhal`	`What is the URL so I can post a link to code in here?`
`18:04.39`	`[TK]D-Fender`	`stoffell : Not at all. Just the fact of that button LEADING to a VM extension.`
`18:04.55`	`x86`	`RevSlowmo: check your /msgs`
`18:05.04`	`RevSlowmo`	`x86: K.`
`18:05.06`	`[TK]D-Fender`	`stoffell : Mine call *98 here at work which is what we would dial manually.`
`18:05.08`	`stoffell`	`[TK]D-Fender.. aah, indeed.. you're right, i see your point..thanks, will do some testing in that... thanks!`
`18:05.17`	`[TK]D-Fender`	`stoffell : np`
`18:05.31`	`*** join/#asterisk groogs_ (n=greg@d221-73-237.commercial.cgocable.net)`
`18:05.32`	`jake1932`	`http://www.voip-info.org/wiki/view/Sphinx`
`18:05.42`	`vooduhal`	`Anyone have the URL to post code to?`
`18:05.48`	`jake1932`	`~pb`
`18:05.49`	`jbot`	`methinks pb is a place to paste your stuff without flooding the channel - try http://pastebin.com/, or http://pastebin.ca`
`18:05.50`	`stoffell`	`[TK]D-Fender; indeed, I can assign <whatever> to it, and let it do some magic in any language... intersting :)`
`18:05.55`	`vooduhal`	`Thank you.`
`18:06.07`	`PakiPenguin`	`thanks jake1932 , looking at that`
`18:07.38`	`vooduhal`	`http://pastebin.ca/56625`
`18:07.47`	`vooduhal`	`Output, agi, and exten.`
`18:07.55`	`vooduhal`	`It's only setting it to the first word.`
`18:09.21`	`jake1932`	`vooduhal: is the .pl taking it as two seperate args?`
`18:09.33`	`ManxPower`	`vooduhal, How do you know it is a Set callerid problem and not a set myvar problem?`
`18:09.47`	`jake1932`	`ok - guess not`
`18:09.51`	`ManxPower`	`Network Sadness: http://pastebin.ca/56626`
`18:10.55`	`jake1932`	`uglyness`
`18:10.55`	`[TK]D-Fender`	`ManxPower : And the packet came back the very next day!`
`18:10.57`	`tzanger`	`wow`
`18:11.00`	`tzanger`	`that's particularly bad`
`18:11.08`	`vooduhal`	`Looks like it is a problem with the set call.`
`18:11.10`	`ManxPower`	`[TK]D-Fender, 8-)`
`18:11.14`	`tzanger`	`are you communicating with a node on the moon or something?`
`18:11.25`	`Nivex`	`ManxPower: oww!`
`18:11.26`	`ManxPower`	`someone sell me inexpensive internet service!`
`18:11.52`	`Qwell[]`	`vooduhal: Are there commas in your CID?`
`18:11.55`	`*** part/#asterisk scubes13 (n=klanders@cpe-071-068-198-068.sc.res.rr.com)`
`18:12.06`	`vooduhal`	`No.`
`18:12.22`	`vooduhal`	`One sec. Update to the code.`
`18:12.26`	`Qwell[]`	`sounds like a problem with your agi`
`18:12.26`	`ManxPower`	`vooduhal, pastebin the CLI output for that`
`18:13.04`	`Qwell[]`	`ManxPower: damn man...with that much jitter, you might as well use lpc10 for faxing`
`18:13.10`	`*** join/#asterisk file (i=jcolp@216.237.114.82)`
`18:13.33`	`vooduhal`	`Ok, http://pastebin.ca/56629`
`18:13.36`	`jake1932`	`SET VARIABLE <variablename> <value>`
`18:13.49`	`ManxPower`	`Qwell, I don't use VoIP`
`18:13.57`	`*** join/#asterisk ckwall (n=ckwall@63.149.122.94)`
`18:13.57`	`jake1932`	`is it possible it's looking at lastname as another arg?`
`18:14.39`	`vooduhal`	`Possibly. Let me try just exec a set command.`
`18:14.55`	`jake1932`	`you can also do an agi debug`
`18:15.13`	`ckwall`	`quick question... i have changed all of my [default] contexts to my company name... but when i try to log into voicemail and it promts for mail box and password, it is still looking for the values under [default]. i have reloaded everything including asterisk. which .conf did i overlook?`
`18:15.36`	`ckwall`	`Incorrect password '2222' for user '3000' (context = default)`
`18:16.05`	`ckwall`	`i have looked in voicemail.conf sip.conf extensions.conf`
`18:16.08`	`[TK]D-Fender`	`ckwall : VoiceMailMain(@context)`
`18:16.18`	`ckwall`	`from the extensions.conf?`
`18:16.23`	`*** part/#asterisk fjean (n=fjean@201.29.140.206)`
`18:16.23`	`jake1932`	`i think the problem has to do with agi using spaces as delimiters`
`18:16.24`	`[TK]D-Fender`	`ckwall : make sure you call it with a matching context`
`18:16.24`	`ManxPower`	`ckwall, paste the Voicemailmain CLI output`
`18:16.24`	`ManxPower`	`pastebin.ca it`
`18:16.30`	`ManxPower`	`no, like this: -- Executing VoiceMailMain("SIP/000e08eac9d8-a-2148", "") in new stack`
`18:16.42`	`*** join/#asterisk mtaht3 (n=m@207.47.5.58.rev.nextweb.net)`
`18:16.54`	`vooduhal`	`Ok, $agi->exec("SET", "AGENTNAME=$2"); does the same thing.`
`18:17.57`	`jake1932`	`If the value being assigned contains spaces then put it inside double quotes.`
`18:18.06`	`vooduhal`	`Ok, let me try that.`
`18:18.07`	`ckwall`	`[TK]D-Fender exten => ,2,VoiceMail(3000@progrexion)`
`18:18.21`	`jake1932`	`vooduhal: http://ourproject.org/docman/view.php/116/177/Parte3agi.html`
`18:18.35`	`vooduhal`	`That fixed it.`
`18:18.42`	`[TK]D-Fender`	`ckwall : looking better. but missing the actual exten. pastebin the fixed entry and relevent section of voicemail.conf`
`18:19.20`	`vooduhal`	`Thank you.`
`18:19.26`	`ckwall`	`sorry... it was there... just didnt type it.`
`18:19.40`	`ckwall`	`yeah, thats how it is, but it still says context = default`
`18:20.05`	`[TK]D-Fender`	`ckwall : pastebin the 2 parts and CLI output...`
`18:20.17`	`driz`	`do i need ztdummy if i run asterisk on solaris?`
`18:21.27`	`[TK]D-Fender`	`driz : Depends if you need ZTDUMMY at all.`
`18:21.47`	`ckwall`	`http://pastebin.ca/56634`
`18:21.54`	`[TK]D-Fender`	`driz : It doesn't have anything to do with any kind of OS inherently except that it wasn't designed for anything except Linux`
`18:22.52`	`[TK]D-Fender`	`ckwall : That CLI does NOT match your dialplan AT ALL. Like you didn't apply the changes`
`18:23.02`	`[TK]D-Fender`	`ckwall : exten => 3000,2,VoiceMail(3000@progrexion)`
`18:23.09`	`[TK]D-Fender`	`ckwall :-- Executing VoiceMailMain("SIP/10.0.0.91-09942258", "") in new stack`
`18:23.18`	`[TK]D-Fender`	`ckwall : Voicemail != VoiceMailMain!`
`18:23.21`	`*** part/#asterisk mtaht3 (n=m@207.47.5.58.rev.nextweb.net)`
`18:23.43`	`[TK]D-Fender`	`ckwall : And by the way, oranges ARE clearly better than apples...`
`18:23.44`	`salviadud`	`slowlaris`
`18:23.54`	`ckwall`	`what??`
`18:24.08`	`salviadud`	`!= equals not`
`18:24.14`	`driz`	`ah`
`18:24.59`	`driz`	`still reading this 376 page pdf about asterisk, so pardon the stupid questions`
`18:25.01`	`driz`	`:)`
`18:25.02`	`salviadud`	`aren't we supposed to be engineers?`
`18:25.03`	`ckwall`	`i have saved the extensionsconf done an extensions reload and even restarted asterisk`
`18:25.16`	`[TK]D-Fender`	`ckwall : Its not executing the same command!`
`18:25.30`	`[TK]D-Fender`	`ckwall : You are showing 2 completely different bits`
`18:25.34`	`Supaplex`	`Reading http://www.voip-info.org/wiki/view/app_rxfax+and+app_txfax under the Sending txfax section, I can set FAXFILE= if I do all this with an external agi right? I'd like to shim/wrap an executable some other system I have uses to send the fax...`
`18:25.58`	`[TK]D-Fender`	`[14:22] <[TK]D-Fender> ckwall : exten => 3000,2,VoiceMail(3000@progrexion)`
`18:25.58`	`[TK]D-Fender`	`[14:23] <[TK]D-Fender> ckwall :-- Executing VoiceMailMain("SIP/10.0.0.91-09942258", "") in new stack`
`18:26.01`	`*** join/#asterisk jerlique (n=jerlique@lnk6.adl5.adsl.esc.net.au)`
`18:26.07`	`ckwall`	`that is the extension entry... what I am dialing is 8500 which is set up for voicemail access`
`18:26.16`	`ckwall`	`is that maybe where I am not clear?`
`18:26.21`	`[TK]D-Fender`	`ckwall : Show me 8500 then!`
`18:26.23`	`ckwall`	`ok`
`18:26.25`	`ckwall`	`hang on`
`18:26.39`	`[TK]D-Fender`	`ckwall : not 2 things that have nothing to do with each other`
`18:27.09`	`ckwall`	`exten => 8500,1,VoicemailMain()`
`18:27.13`	`vooduhal`	`I'm sorry for all of the ignorant questions. How do I take the first 2 chars of an ${EXTEN} like I could the last two by doing this ${EXTEN:2}`
`18:27.14`	`ckwall`	`thats all i am dialing`
`18:27.27`	`[TK]D-Fender`	`ckwall : thats the problem and you clearly didn't read my sample`
`18:27.27`	`Qwell[]`	`vooduhal: :0:2`
`18:27.34`	`vooduhal`	`Thank you.`
`18:27.38`	`Qwell[]`	`I believe`
`18:27.50`	`[TK]D-Fender`	`ckwall : that should look like exten => 8500,1,VoicemailMain(@progrexion)`
`18:28.07`	`[TK]D-Fender`	`[14:16] <[TK]D-Fender> ckwall : VoiceMailMain(@context)`
`18:28.12`	`ckwall`	`ok... i guess that () would look for default?`
`18:28.20`	`ckwall`	`cuz it used to work till i changed the context`
`18:28.22`	`[TK]D-Fender`	`ckwall : yes`
`18:28.25`	`ckwall`	`makes sense.`
`18:28.25`	`ckwall`	`thanks`
`18:28.31`	`file`	`psychic powers not installed :(`
`18:28.36`	`[TK]D-Fender`	`ckwall : It tells you that to your face in CLI`
`18:28.36`	`Qwell[]`	`unless you use searchcontexts`
`18:28.39`	`marl`	`hi, can anyone tell me if its posible to have 'PrivacyManager' forward the number entered to the destination extesnion rather than displaying 'PrivacyManager'?`
`18:28.47`	`[TK]D-Fender`	`Incorrect password '2222' for user '3000' (context = default)`
`18:30.10`	`pete_l`	`well upgrading to asterisk 1.2.7.1, I have noticed when app_queue connects an agent and a caller that I no longer get a channel jumping to the 'h' extension. Was this done for a reason, or is it a bug?`
`18:30.52`	`Supaplex`	`regression isolation`
`18:32.20`	`ManxPower`	`pete_l, it should never jump to "h" until the call hangs up`
`18:32.33`	`*** join/#asterisk MacDome (n=eseidel@c-71-198-177-144.hsd1.ca.comcast.net)`
`18:32.38`	`mut`	`wooo`
`18:32.46`	`mut`	`' ' that close to owning my first house`
`18:33.07`	`Qwell[]`	`mut: Hope you didn't go with one of those "other" mortgage companies`
`18:33.12`	`Qwell[]`	`that would make me disappointed`
`18:33.15`	`mut`	`heh`
`18:33.23`	`mut`	`actaully`
`18:33.24`	`Qwell[]`	`So, fess up...which one?`
`18:33.32`	`pete_l`	`On my old version there was a channel that when the two where connected, jumped to the 'h' channel, so "feature" was a bug?`
`18:33.34`	`mut`	`got mhsda & rural development`
`18:33.55`	`mut`	`which wasn't bad`
`18:33.58`	`mut`	`5.874%`
`18:34.02`	`mut`	`100% financed`
`18:34.03`	`Qwell[]`	`mut: Which company? :p`
`18:34.07`	`mut`	`independant bank`
`18:34.11`	`Qwell[]`	`pfft`
`18:34.27`	`*** join/#asterisk MacDome (n=eseidel@c-71-198-177-144.hsd1.ca.comcast.net)`
`18:35.00`	`driz`	`alright, let me rephrase the question. if i want to provide music on hold with asterisk on solaris, is there a ztdummy type of thing i need as a dependency?`
`18:35.05`	`mut`	`pfft what`
`18:35.15`	`Qwell[]`	`pfft independant banks`
`18:35.22`	`mut`	`thats the name of it`
`18:35.22`	`mut`	`heh`
`18:35.31`	`Qwell[]`	`I stand by my statement`
`18:35.52`	`mut`	`http://www.ibcp.com/`
`18:35.53`	`mut`	`that`
`18:36.00`	`Qwell[]`	`I know what that is :p`
`18:36.12`	`mut`	`what would you rater i did`
`18:36.27`	`mut`	`getmeamortgage.com`
`18:36.28`	`Qwell[]`	`give US you rmoney! :p`
`18:36.46`	`*** join/#asterisk unixgeek (n=unixgeek@216-220-234-197.exploremaine.com)`
`18:36.49`	`Qwell[]`	`Uncle Guido's Loans - and pasta house`
`18:36.57`	`mut`	`well sure`
`18:37.04`	`dlynes_office`	`[TK]D-Fender: so i guess there's no buttons you can click on to page that extension?`
`18:37.05`	`mut`	`i'll will it all over to you`
`18:37.08`	`mut`	`no worries`
`18:37.17`	`*** join/#asterisk djacob-wcgs (i=djacob-w@c-68-32-12-249.hsd1.pa.comcast.net)`
`18:37.21`	`djacob-wcgs`	`hello all`
`18:37.24`	`djacob-wcgs`	`how are you today`
`18:37.32`	`*** join/#asterisk RF_MIA (n=unknown@ip67-93-229-222.z229-93-67.customer.algx.net)`
`18:39.34`	`*** join/#asterisk trelane_ (n=trelane@pdpc/supporter/sustaining/trelane)`
`18:41.37`	`pete_l`	`ManxPower, thanks`
`18:41.37`	`[TK]D-Fender`	`dlynes_office : Buttons? Huh? What?`
`18:41.53`	`[TK]D-Fender`	`driz : You don't need zaptel at all fo MoH`
`18:42.02`	`dlynes_office`	`[TK]D-Fender: for blf`
`18:42.19`	`[TK]D-Fender`	`dlynes_office : What does BLF have to do with BUTTONS or PAGING?`
`18:43.03`	`[TK]D-Fender`	`dlynes_office : Try to describe the scenario and I presume we are talking about Polycom phones`
`18:43.04`	`dlynes_office`	`[TK]D-Fender: because a blf button displays the status of the extension, and also allows you to call that extension`
`18:43.11`	`dlynes_office`	`[TK]D-Fender: correct`
`18:43.50`	`mut`	`quief madsen!`
`18:44.34`	`[TK]D-Fender`	`dlynes_office : Typically yes your HINT should point to an exten that DIALS the phone. For paging you'd need to likely manually dial the exten with an Alert_Info that would cause a ring-answer on it to page. You wouldn't want it just paging though whenever just anybody tried dialing it.`
`18:44.54`	`dlynes_office`	`[TK]D-Fender: I meant more like intercom, than paging`
`18:45.04`	`dlynes_office`	`[TK]D-Fender: i.e. just ring the extension, not page over its speaker`
`18:45.13`	`dlynes_office`	`[TK]D-Fender: but being able to page over its speaker would be nice, too`
`18:45.44`	`[TK]D-Fender`	`dlynes_office : then I really don't know why you use the term "paging" you want to jsut dial off a BLF'd key which is exactly what it does.`
`18:45.50`	`dlynes_office`	`[TK]D-Fender: so any idea how many lines and blfs I could have on a 501?`
`18:46.35`	`[TK]D-Fender`	`dlynes_office : AGain, there are no "lights" onthe 501, but 2 line keys could be used for BLF status (grey LCD). For a "lookup you can watch a total of 7 or 8 max`
`18:46.45`	`[TK]D-Fender`	`dlynes_office : using the "buddies" soft-key`
`18:47.09`	`dlynes_office`	`so 7 or 8 blfs max, and 3 lines max?`
`18:48.50`	`[TK]D-Fender`	`dlynes_office : there are 3 line keys, but you need to use at least 1 for your registration, leaving you 2 keys. so on "idle" you could only see 2.`
`18:49.36`	`CunningPike`	`dlynes_office: With 1.6.6, there's no limit on BLFs any more`
`18:50.18`	`Assid`	`when'd 1.6.6 come out?`
`18:50.23`	`CunningPike`	`So, with a 601 and sidecar(s), you can have as many as you need`
`18:50.43`	`CunningPike`	`Assid: Not sure - we got it under NDA - not sure if it's generally available yet`
`18:50.46`	`dlynes_office`	`So, I can only have a choice of 2 lines to dial out on?`
`18:50.47`	`Ahrimanes`	`man i dislike php`
`18:50.58`	`Assid`	`whats blf ?`
`18:51.02`	`djacob-wcgs`	`hello guys sorry to interrupt, I have a asterisk box setup andtalking to a cisco 5400 that has tdm t1's outbound, as well as talking to some ATA's and softphone, i am looking for a voip DID provider that can get me about a dozen DID's for NYC and send to me over sip. can anyone recommend someone resonalbly priced? sorry if this is not the proper place to post this request`
`18:51.04`	`dlynes_office`	`Busy Lamp Field`
`18:51.09`	`dlynes_office`	`~blf`
`18:51.11`	`jbot`	`i heard blf is Busy Lamp Field, aka little lights next to speed dials that light up when the person is on the phone and blink when that line is ringing. hint extensions are static mapped to SIP or other channels.`
`18:52.13`	`Assid`	`so what was the limitation before ?`
`18:52.21`	`CunningPike`	`Assid: 7, I thinkl`
`18:52.27`	`Assid`	`on 601?`
`18:52.28`	`CunningPike`	`s/thinkl/think/`
`18:52.37`	`CunningPike`	`Assid: On anything`
`18:52.43`	`*** join/#asterisk [Airwolf] (n=airwolf@83.98.235.219)`
`18:52.49`	`CunningPike`	`Assid: It was in the SIP application`
`18:52.55`	`vechers`	`djacob-wcgs: Vonage perhaps?`
`18:52.57`	`Assid`	`i dont get it.. how is the blf helpful ?`
`18:53.28`	`CunningPike`	`Assid: It lets an administrative assistant see if their manager is on the phone, for example`
`18:53.54`	`[TK]D-Fender`	`CunningPike : Not entirely true`
`18:54.07`	`CunningPike`	`[TK]D-Fender: Enlighten me`
`18:54.16`	`Supaplex`	`am I better off using an fxo card plugged into a faxmodem, or is softfax ok? I'm using iax termination from my carrier half way accrost the U.S.`
`18:54.30`	`[TK]D-Fender`	`CunningPike : The limit is 48 on 601's. Technically you can have more buddies than that and you can't watch them ALL.`
`18:54.33`	`djacob-wcgs`	`wechers: looking for more of a carrier that i can have more than one call up on a DID like they do for phone cards and stuff , kinda like paetec or somthing`
`18:54.53`	`[TK]D-Fender`	`CunningPike : And for 501 its limited to 8 which you could only ever hope to see in the "buddy" screen`
`18:55.06`	`[TK]D-Fender`	`CunningPike : Its all clearly written inthe changelog`
`18:55.16`	`CunningPike`	`[TK]D-Fender: Well, thanks for that`
`18:55.26`	`Assid`	`does a 301 even have a buddy screen? for that matter whats a buddy screen?`
`18:55.29`	`dlynes_office`	`CunningPike: yeah, it'd be cool if sipura 3000's would support blf`
`18:55.49`	`Supaplex`	`djacob-wcgs: junctionnetworks allows 25 lines per did. $2/mo per did and ?? cpm.`
`18:56.37`	`brad_mssw`	`junctionnetworks is a little pricy, but they've been reliable for us`
`18:56.40`	`De_Mon`	`in the dialplan I want to know where the call is comming from ie: SIP/user01 where is that stored?`
`18:57.03`	`CunningPike`	`Assid: Buddy screen is Polycom speak for the Presence feature - not sure if the 301 supports presence - maybe [TK]D-Fender knows`
`18:57.16`	`brad_mssw`	`think it's $0.029/min in/out standard , and $0.039/min in for 800 numbers`
`18:57.22`	`Assid`	`nah.. dont see anything like that on 301`
`18:57.27`	`Assid`	`guess its not there`
`18:57.40`	`djacob-wcgs`	`Supaplex; thanks , that is exactly what i am looking for, let me check them out`
`18:58.08`	`Assid`	`docelm0: you there?`
`18:58.16`	`Ahrimanes`	`anyone doing funny cdrs with asterisk bridging 2 pstn calls and billing that to a local accountcode?`
`18:58.20`	`[TK]D-Fender`	`Assid : You need to enable it in your sip.cfg`
`18:58.42`	`[TK]D-Fender`	`Assid : and yes, the 301's have it, though on its character based LCD browsing it really blows.`
`18:59.26`	`Assid`	`okay but how does it hep really?`
`19:00.56`	`[TK]D-Fender`	`Assid : you can tell their status by scrolling through a list of tracked buddies`
`19:01.14`	`[TK]D-Fender`	`If you want to know who's on the phone or not.`
`19:01.21`	`Assid`	`sweet`
`19:01.51`	`Assid`	`just curious.. the 301 has 3 buttons.. 2 of which are used.. and 1 is left empty.. is there a way i can set something on that.. like my directory ?`
`19:02.02`	`*** part/#asterisk W4 (n=W4@host-195-82-106-225.dynamic.mailbox.co.uk)`
`19:03.29`	`*** join/#asterisk kevinfcn (n=kevinfcn@c-68-39-64-129.hsd1.nj.comcast.net)`
`19:04.19`	`*** join/#asterisk _Paulo_ (n=Paulo@c906d4b0.virtua.com.br)`
`19:05.46`	`Assid`	`err.. button 25`
`19:07.05`	`[TK]D-Fender`	`Assid : Which button is "empty"?`
`19:07.21`	`[TK]D-Fender`	`Assid : Last I recall they all had a function...`
`19:07.26`	`*** join/#asterisk jmanq (n=jquintus@pool-151-199-63-201.bos.east.verizon.net)`
`19:07.52`	`Assid`	`oh wait`
`19:07.52`	`Assid`	`now it has a function`
`19:07.53`	`Assid`	`i just enabled presense`
`19:11.27`	`[TK]D-Fender`	`Assid : that would help :)`
`19:11.56`	`Assid`	`err.. not really.. no one on this box :(`
`19:13.02`	`generalhan`	`[TK]D-Fender: do you use .call files at all ?`
`19:13.11`	`*** join/#asterisk trelane_ (n=trelane@pdpc/supporter/sustaining/trelane)`
`19:13.41`	`De_Mon`	`Bwaaa func_channel isn't even in 1.2`
`19:13.48`	`De_Mon`	`hrm`
`19:14.14`	`r_evolution`	`conjunction junction`
`19:14.15`	`r_evolution`	`whats your`
`19:14.17`	`r_evolution`	`function`
`19:14.34`	`[TK]D-Fender`	`generalhan : nope, not yet`
`19:14.58`	`Assid`	`next up i wanna play with the graphics on polycom`
`19:16.55`	`Ahrimanes`	`any manager/dialplan gurus?`
`19:17.18`	`Meaty`	`:o`
`19:17.21`	`*** join/#asterisk _Paulo_ (n=Paulo@c906d4b0.virtua.com.br)`
`19:17.36`	`[TK]D-Fender`	`Ahrimanes : I'm pretty good with Dialplan... not manager though`
`19:17.37`	`rpm`	`manager guru's?`
`19:18.21`	`Meaty`	`Ahrimanes : You have a question ?`
`19:18.36`	`dlynes_office`	`anyways...thanks for the info on the polycoms, [TK]D-Fender and CunningPike`
`19:18.42`	`*** join/#asterisk [hC] (n=hardcore@mail.metrobridge.com)`
`19:18.50`	`CunningPike`	`dlynes_office: np`
`19:19.05`	`Ahrimanes`	`Meaty: yeah, any way to supply the channel argument to Dial like managers originate does?`
`19:19.12`	`dlynes_office`	`I think I might have finally convinced my boss that line indicators are not really all that important after you get three lines or more`
`19:19.14`	`*** part/#asterisk jmanq (n=jquintus@pool-151-199-63-201.bos.east.verizon.net)`
`19:19.27`	`dlynes_office`	`He's having a problem getting his head out of Nortel mode`
`19:19.28`	`rpm`	`asterisk needs an application to bridge channels. if i know what both the channel names and i don't care what the status is.`
`19:20.41`	`[TK]D-Fender`	`dlynes_home : who is?`
`19:21.00`	`generalhan`	`Ok quick question ... how difficult is it to change the user that asterisk runs on, once its already built and everything?`
`19:21.01`	`rpm`	`i have a mitel dialplan i need to convert to asterisk :)`
`19:21.06`	`Ahrimanes`	`[TK]D-Fender: see what i said to Meaty ..`
`19:21.22`	`generalhan`	`i found out why my .call file stuff isnt working ... cause the file is created by apache but asterisk isnt run by apache`
`19:21.45`	`De_Mon`	`generalhan welcome to the wonderful world of asterisk permissions`
`19:21.47`	`rpm`	`generalhan: setuid the /var/spool/asterisk/outgoing directory so the files are created as asterisk`
`19:21.47`	`_Paulo_`	`generalhan, use sudo`
`19:22.02`	`[TK]D-Fender`	`Ahrimanes : Sorry, can't just bridge...`
`19:22.21`	`generalhan`	`im a huge linux newb i dont think i understand sudo`
`19:23.05`	`De_Mon`	`rpm setuid?`
`19:23.12`	`generalhan`	`rpm: the files arent created in /var/spool/asterisk/outgoing they are just moved there.`
`19:23.25`	`Ahrimanes`	`[TK]D-Fender: ok :(`
`19:23.35`	`rpm`	`generalhan: type chmod 2755 /var/spool/asterisk/outgoing/ also make sure you are not creating the call files on a different partition, you cannot copy the files you have to move them. asterisk will read them in before they're fully written`
`19:23.40`	`_Paulo_`	`generalhan, type visudo to edit the /etc/sudoers file`
`19:23.53`	`djacob-wcgs`	`sorry buddy , igot cought up in a mess`
`19:23.54`	`_Paulo_`	`than put something like:`
`19:24.04`	`Ahrimanes`	`[TK]D-Fender: thing is i need to check if a blindtransfer transfers to a pstn number and bill accordingly.. even if the sip user has called out to a pstn and then transfers to another pstn`
`19:24.05`	`djacob-wcgs`	`oops wrong window :)`
`19:24.20`	`_Paulo_`	`Cmnd_Alias CHOWNASTERISK = /bin/chown asterisk\:asterisk /tmp/CALL*`
`19:24.25`	`_Paulo_`	`and then`
`19:24.53`	`_Paulo_`	`User_Alias WWW = www-data, apache`
`19:25.08`	`generalhan`	`OMG there has to be a way in Perl to preform a chown on a file i make to make the owner the same as asterisk's user`
`19:25.08`	`Qwell[]`	`_Paulo_ shall further be known as the sudo guru`
`19:25.08`	`_Paulo_`	`WWW ALL = (ALL) NOPASSWD: CHOWNASTERISK`
`19:25.46`	`_Paulo_`	`generalhan, you have to use suidperl`
`19:26.06`	`generalhan`	`_Paulo_: what is that ?>`
`19:26.36`	`_Paulo_`	`generalhan, an special incarnation of perl to make suid scripts`
`19:26.56`	`_Paulo_`	`generalhan, do you know what suid means?`
`19:27.04`	`generalhan`	`i know what uid means`
`19:27.04`	`djacob-wcgs`	`i dont`
`19:27.14`	`Qwell[]`	`suid=set uid`
`19:27.19`	`djacob-wcgs`	`ok thanks`
`19:27.32`	`Qwell[]`	`basically, run the program as that user`
`19:27.53`	`Qwell[]`	`(there is also sgid)`
`19:28.00`	`*** join/#asterisk MacDome (n=eseidel@A17-255-105-166.apple.com)`
`19:28.08`	`djacob-wcgs`	`kool`
`19:28.18`	`generalhan`	`i see... so i would have to use suid to set the .call file's "user"/"owner" to asterisk then i can move the file over and i will be in business ?`
`19:28.26`	`_Paulo_`	`no`
`19:28.40`	`_Paulo_`	`you will use suidperl instead of perl`
`19:28.51`	`_Paulo_`	`and make the script owner = asterisk`
`19:29.12`	`_Paulo_`	`so your cgi will run as the asterisk user`
`19:29.31`	`De_Mon`	`will apache let him do that?`
`19:29.44`	`Qwell[]`	`De_Mon: sure, why not?`
`19:29.46`	`xp_prg`	`can someone explain to me the originate asterisk command, from what I can tell if you put an extention in, it will automatically connect the dialed # to that extention up answering is that right?`
`19:30.08`	`generalhan`	`_Paulo_:right now i have the script as call.cgi so when i run it from the url i just run 192.168.0.42/call.cgi?PERAMS`
`19:30.22`	`generalhan`	`how would i call on the script that i make in suidperl ?`
`19:30.26`	`CunningPike`	`Does anyone here find their Polycoms too quiet? We have people complaining that the volume on calls and recordings from Polycoms is too low...`
`19:30.36`	`_Paulo_`	`generalhan, change the shebang line`
`19:30.48`	`Qwell[]`	`#!/usr/bin/suidperl`
`19:30.49`	`Qwell[]`	`sheesh`
`19:30.52`	`Qwell[]`	`:p`
`19:31.16`	`[TK]D-Fender`	`CunningPike : its not the phones, its your PSTN interface`
`19:31.28`	`De_Mon`	`someone ask why its called a shebang comon`
`19:31.34`	`_Paulo_`	`like Qwell said`
`19:31.39`	`CunningPike`	`[TK]D-Fender: Hardly, if it's a SIP to SIP call`
`19:31.56`	`[TK]D-Fender`	`# = hash. ! as an exlamation is a BANG`
`19:32.06`	`CunningPike`	`[TK]D-Fender: Or a recording from a Polycom`
`19:32.09`	`Qwell[]`	`and hashbang sounds stupid`
`19:32.15`	`[TK]D-Fender`	`CunningPike : they need their ears cleaned :)`
`19:32.20`	`Qwell[]`	`shbang sounds like a shell`
`19:32.24`	`Qwell[]`	`so they fudged it`
`19:32.51`	`[TK]D-Fender`	`CunningPike : I run them at work & home, and consult their usage elsewhere. Never a comment to that effect that wasn't PSTN related.`
`19:32.55`	`iPBX`	`anyone know how, with GXP2000 and AsteriskBLF, how to make the light show OFF when they are offline, instead of ON`
`19:33.25`	`gursikh`	`can someone tell me how to do a FULL reset of a polycom 501? (key combo or something?)`
`19:33.49`	`CunningPike`	`[TK]D-Fender: What we find is that Allison is louder than we are - people up their volume to hear a greeting for example, and then get their ears blown off by Allison`
`19:34.00`	`Qwell[]`	`gursikh: unplug it`
`19:34.14`	`CunningPike`	`gursikh: 4,6,8 and *, iirc`
`19:34.19`	`gursikh`	`I mean I want to remove all config, etc.`
`19:34.25`	`CunningPike`	`gursikh: That's for a factory reset`
`19:34.36`	`gursikh`	`4,6,8, and * ?`
`19:34.38`	`gursikh`	`ok let me go try`
`19:37.28`	`*** join/#asterisk MattH (n=MattH@63.174.244.195)`
`19:37.42`	`MattH`	`Hi.. is there some way that I can figure out what parking space a call was parked in from an extension?`
`19:39.26`	`generalhan`	`Qwell[], _Paulo_: is the syntax of suidperl any different? will i have to adjust my script that i already made ?`
`19:39.36`	`_Paulo_`	`no`
`19:39.48`	`_Paulo_`	`but I thin there are some naming convention`
`19:39.51`	`_Paulo_`	`in apache`
`19:40.06`	`*** join/#asterisk justinu\|laptop (n=Justin@dsl081-083-093.lax1.dsl.speakeasy.net)`
`19:40.07`	`generalhan`	`_Paulo_: uh oh .. lol, am i going to be able to do this ?`
`19:40.17`	`generalhan`	`i barely know Perl as it is`
`19:40.21`	`_Paulo_`	`sure`
`19:40.41`	`justinu\|laptop`	`anyone know how to play a periodic beep tone on top of a bridged call while you're recording it?`
`19:40.42`	`generalhan`	`ok then ! lol. what so you mean naming convention in apach ?`
`19:40.44`	`generalhan`	`apache rather`
`19:41.14`	`Qwell[]`	`justinu\|laptop: modify app_record..`
`19:41.16`	`_Paulo_`	`some apache installs restrict suid scripts`
`19:41.19`	`Qwell[]`	`and probably core stuffage`
`19:41.29`	`*** join/#asterisk mindwarp (i=mindwarp@silenceisdefeat.org)`
`19:41.36`	`generalhan`	`_Paulo_: how do i check if mine will restrict it ?`
`19:41.49`	`justinu\|laptop`	`actually, it would be mixmonitor for me...`
`19:41.54`	`_Paulo_`	`try it... :-)`
`19:41.59`	`Qwell[]`	`justinu\|laptop: whichever`
`19:42.32`	`_Paulo_`	`just do a "chown asterisk:asterisk /path/to/your/app.cgi"`
`19:43.07`	`_Paulo_`	`and change #!/usr/bin/perl to #!/usr/bin/suidperl in the scripts first line`
`19:43.21`	`generalhan`	`_Paulo_: ok so i installed suidperl then i change the shell change the script owner to asterisk then when i run the script it will stay as asterisk for when i move it over to /var/spool/asterisk/outgoing`
`19:44.01`	`_Paulo_`	`yepz, the script will run as the asterisk user`
`19:44.20`	`_Paulo_`	`and every file created will belong to asterisk`
`19:44.44`	`_Paulo_`	`generalhan, what linux distro are u running?`
`19:44.44`	`mindwarp`	`hi, question: i have a 2-line phone with an rj11 port that combines both lines. can i plug that into an FXS in a TDM card and have asterisk handle those two lines separately? or do i have to connect each line to a separate FXS?`
`19:44.49`	`mindwarp`	`thanks`
`19:44.50`	`generalhan`	`FC4`
`19:44.57`	`*** join/#asterisk droops (n=droops@adsl-065-005-212-128.sip.jan.bellsouth.net)`
`19:44.59`	`generalhan`	`im looking for the RPM now`
`19:45.24`	`_Paulo_`	`mindwarp, each line in a separete port`
`19:45.27`	`Hmmhesays`	`blabbitty blah balh`
`19:45.57`	`mindwarp`	`_Paulo_: thanks`
`19:46.11`	`generalhan`	`_Paulo_: you have a good place to get the RPM from ?`
`19:46.36`	`_Paulo_`	`Im using debian since RH closed theyr distro.`
`19:46.57`	`_Paulo_`	`but I remember using rpmfind`
`19:47.23`	`_Paulo_`	`dont fc4 has something like apt?`
`19:47.37`	`generalhan`	`i tried yum install suidperl`
`19:47.40`	`generalhan`	`but it didnt come up`
`19:48.25`	`_Paulo_`	`try perl-suidperl`
`19:49.08`	`mindwarp`	`_Paulo_: after connecting each line to a separate port, do i also have to use two separate cables to connect a two-line phone to the card?`
`19:49.37`	`mindwarp`	`(and have it talk to both lines)`
`19:51.48`	`_Paulo_`	`mindwarp, you can mess with the cable`
`19:52.41`	`mindwarp`	`hmm... "mess"`
`19:52.50`	`_Paulo_`	`modern phones use just 1 pair`
`19:52.56`	`mindwarp`	`ok`
`19:53.00`	`*** join/#asterisk ToyMan (n=stuq@user-12lcqia.cable.mindspring.com)`
`19:53.04`	`_Paulo_`	`and the cable has 2`
`19:53.29`	`_Paulo_`	`so you can put one rj11 for each pair`
`19:53.48`	`_Paulo_`	`in the * box side`
`19:54.05`	`mindwarp`	`oh, i see. well i'd probably just use two cables at that point. the phone does have 2 ports for situations like that`
`19:54.21`	`mindwarp`	`what i was wondering is if i can switch between lines using just the one cable, like the phone does`
`19:54.37`	`mindwarp`	`when connected to a combo "line 1 + line 2" POTS port`
`19:55.07`	`[TK]D-Fender`	`mindwarp : You need to FXS ports for what you want.`
`19:55.18`	`[TK]D-Fender`	`mindwarp : Each is completely independant of the other`
`19:55.26`	`mindwarp`	`ok, i see. thanks.`
`19:55.33`	`mindwarp`	`i guess i'm gonna need two TDM cards then`
`19:55.51`	`mindwarp`	`because i'd need two FXO and three FXS`
`19:56.03`	`_Paulo_`	`mindwarp, the phones 1 rj11 for 2 lines is a hack`
`19:56.14`	`mindwarp`	`_Paulo_: right, i suspected that`
`19:58.11`	`[TK]D-Fender`	`_Paulo_ : Not rally a hack, its an accepted standard, just that tdm400 cards don't take in RJ21 :)`
`19:58.20`	`Hmmhesays`	`http://www.directionzero.com/2006/doggy-style/`
`19:58.40`	`mindwarp`	`ahh, so it isn't real rj11`
`19:58.42`	`mindwarp`	`interesting`
`19:59.13`	`_Paulo_`	`ditto`
`20:02.32`	`*** join/#asterisk [Airwolf] (n=airwolf@83.98.235.219)`
`20:03.19`	`*** join/#asterisk sangee (n=rkuru@206.191.114.66)`
`20:03.58`	`sangee`	`how do i increase the volume for leg2 (i am only using sip)?`
`20:05.09`	`_Paulo_`	`rxgain/txgain?`
`20:05.20`	`sangee`	`this is for the digium card?`
`20:05.27`	`_Paulo_`	`oh... sip`
`20:05.39`	`[TK]D-Fender`	`sangee : You don't`
`20:06.15`	`sangee`	`my second leg volume is really low? i want to increase`
`20:06.25`	`ManxPower`	`sangee, you cannot change the volume of a SIP call. That must be done in the SIP device, not Asterisk`
`20:06.43`	`sangee`	`ok`
`20:06.48`	`sangee`	`thx`
`20:09.03`	`*** join/#asterisk Assid (n=assid@203.115.83.214)`
`20:12.33`	`ManxPower`	`Asterisk can change the volume of a ZAP leg of a call, of course.`
`20:12.47`	`Assid`	`VoicePulse: where are you man`
`20:14.02`	`VoicePulse`	`I am investigating the issue we are discussing in PM.`
`20:14.18`	`Assid`	`oh okay.. thought u disappeared`
`20:18.04`	`*** join/#asterisk ikey1 (i=ikey@220.226.8.213)`
`20:20.22`	`*** join/#asterisk tdonahue-laptop (n=tdonahue@64.201.13.172)`
`20:22.21`	`sevard`	`So, We need help getting inbound CID working with a TDM400P. Who can help?`
`20:22.30`	`sevard`	`in the united states*`
`20:22.42`	`Qwell[]`	`sevard: Do you have CID from the telco?`
`20:22.56`	`sevard`	`Yes, I tested.`
`20:23.07`	`sevard`	`but when it comes into the card I get zilch`
`20:23.17`	`Qwell[]`	`usecallerid=yes, callerid=asreceived`
`20:23.19`	`*** part/#asterisk pattieja (n=pcxuser@c-67-163-29-136.hsd1.il.comcast.net)`
`20:23.20`	`justinu\|laptop`	`gains not tuned?`
`20:23.25`	`sevard`	`I have both of those lines.`
`20:23.30`	`*** join/#asterisk diclophis (n=diclophi@65.203.37.58)`
`20:23.33`	`*** join/#asterisk batphone (n=will@69.15.174.114)`
`20:23.41`	`batphone`	`what causes asterisk to spawn 184 processes?`
`20:23.42`	`Qwell[]`	`Put a Wait(2) before you answer`
`20:23.50`	`sevard`	`before you answer?!`
`20:23.55`	`CrummyGummy`	`Hi all, are there any Digium cards that can handle quad BRI access? I can only see quad PRI cards.`
`20:23.55`	`Qwell[]`	`sevard: try it`
`20:24.02`	`Assid`	`batphone: crazy ass loads?`
`20:24.03`	`sevard`	`alright.`
`20:24.06`	`Qwell[]`	`see if the cid is just lagging`
`20:24.14`	`Qwell[]`	`batphone: Those probably aren't processes, but threads`
`20:24.36`	`diclophis`	`howdy all`
`20:24.42`	`diclophis`	`so.. what is up with a 'timing cable' ?`
`20:24.44`	`Qwell[]`	`some versions of...something, show all threads..not just procs`
`20:26.18`	`sevard`	`Qwell[]: That didn't work.`
`20:26.28`	`*** join/#asterisk Vorondil (n=jkiffmey@miro.voltaiccommerce.com)`
`20:26.29`	`justinu\|laptop`	`so try tuning your gains`
`20:26.35`	`justinu\|laptop`	`rxgain first`
`20:26.44`	`Qwell[]`	`sevard: If you plug in a normal phone, it gets cid?`
`20:26.54`	`batphone`	`threads`
`20:26.55`	`sevard`	`Yes, if I plug in a normal phone it gets CID.`
`20:26.56`	`batphone`	`ps axuw`
`20:27.03`	`batphone`	`lots of asteriskes`
`20:27.26`	`Supaplex`	`batphone: pstree =)`
`20:28.40`	`justinu\|laptop`	`if the gain isn't set right, the FSK CLID tones get distorted, and the dsp software can't decode them`
`20:28.48`	`batphone`	`Supaplex:`
`20:28.49`	`batphone`	`http://pastebin.ca/56667`
`20:29.03`	`batphone`	`pro-ces-ses`
`20:29.08`	`batphone`	`that is after a restart`
`20:29.11`	`sevard`	`justinu\|laptop: I don't think I can tune my gains any more than they already are.`
`20:29.18`	`batphone`	`when it comes back up ill show you a good one`
`20:29.18`	`Supaplex`	`batphone: that looks normal`
`20:29.34`	`justinu\|laptop`	`ok... i didn't get an answer on whether you had tuned them`
`20:29.44`	`sevard`	`sorry.`
`20:29.59`	`sevard`	`justinu\|laptop: just for reference's sake what do you have yours set to?`
`20:30.05`	`Supaplex`	`batphone: while idle, ??asterisk???asterisk???15*[asterisk]`
`20:30.16`	`justinu\|laptop`	`sevard: depends on the box`
`20:30.21`	`justinu\|laptop`	`they're all different`
`20:31.07`	`sevard`	`is there anything else I can do? I'm pretty sure the gains are set correctly.`
`20:31.24`	`justinu\|laptop`	`for shits and giggles, you could try and go lower on the rxgain`
`20:31.35`	`justinu\|laptop`	`see if it starts working`
`20:31.50`	`justinu\|laptop`	`try increments of 4, until you can't hear anything... then you've ruled out that as the cause`
`20:32.02`	`batphone`	`i think one of these call queue agents is forwarding their phone to the main number`
`20:32.09`	`sevard`	`I'll try it for shits and giggles.`
`20:33.03`	`justinu\|laptop`	`dlynes here had similar issues, and gain was his problem`
`20:33.18`	`sevard`	`k, going to play with it.`
`20:33.35`	`diclophis`	`justinu\|laptop, how to you test the rx/tx gain?`
`20:33.44`	`diclophis`	`and what are 'good numbers'`
`20:33.58`	`justinu\|laptop`	`there are no good numbers, just what works for the particular install`
`20:34.09`	`Ahrimanes`	`anyone know how to stop sjphone from starting on windows startup?`
`20:34.13`	`diclophis`	`yea, what about the ztmonitor tool though`
`20:34.25`	`diclophis`	`that outputs numbers`
`20:34.30`	`justinu\|laptop`	`eh... i tried that`
`20:34.36`	`r_evolution`	`try removing it from either the startup menu ahrimanes`
`20:34.39`	`justinu\|laptop`	`i ended up just doing it by ear`
`20:34.40`	`r_evolution`	`or removing it from the registry :)`
`20:34.49`	`r_evolution`	`fux a bunch of justinu.`
`20:34.50`	`r_evolution`	`;)`
`20:34.58`	`justinu\|laptop`	`i think the key is to get the gains as low as you can go, before the audio is too quiet`
`20:35.04`	`justinu\|laptop`	`distortion is bad`
`20:35.08`	`justinu\|laptop`	`mmkay?`
`20:35.17`	`Ahrimanes`	`hm, hate it when it's in the registry`
`20:35.25`	`Malthus`	`hi all`
`20:35.42`	`r_evolution`	`it's not that hard mang.`
`20:35.47`	`r_evolution`	`start > run > msconfig`
`20:35.49`	`r_evolution`	`:)`
`20:35.54`	`Malthus`	`anyway to do 3-way calling thru * with a SIP gateway that does NOT do 3-way calling?`
`20:35.56`	`generalhan`	`Qwell[], _Paulo_: i tried the suidperl script, did a chown asterisk on it, and still im getting the permission errors ? any ideas ?`
`20:36.12`	`Qwell[]`	`generalhan: What user owns the perl script?`
`20:36.20`	`generalhan`	`same that runs asterisk`
`20:36.40`	`Qwell[]`	`a lowly user can't steal permission from apache`
`20:36.41`	`justinu\|laptop`	`Malthus: app_meetme`
`20:37.02`	`generalhan`	`Qwell[]: i just didnt want to admit the user that runs asterisk ... lol. it's root`
`20:37.05`	`Ahrimanes`	`r_evolution: ah thx.. usually dont use windows so dont know these tricks :D`
`20:37.20`	`Qwell[]`	`generalhan: So the perl script itself is chown'ed to root:root?`
`20:37.21`	`Malthus`	`justinu\|laptop, would I be able to capture the hook flash to trigger the meetme?`
`20:37.26`	`generalhan`	`yes`
`20:37.38`	`generalhan`	`Qwell[]: -rwxr-xr-x 1 root root 543 May 17 13:34 trial.cgi`
`20:37.44`	`justinu\|laptop`	`Malthus: i'm not sure... depends on how your ATA notifies asterisk of that hookflash`
`20:37.50`	`Qwell[]`	`dunno, never used suidperl... _Paulo_ might know`
`20:37.51`	`justinu\|laptop`	`if it does at all`
`20:37.57`	`Malthus`	`I think it does`
`20:38.07`	`Qwell[]`	`generalhan: You also made the changes in visudo?`
`20:38.16`	`generalhan`	`Qwell[]: what changes ?`
`20:38.22`	`Qwell[]`	`the changes he said you needed to make :P`
`20:38.31`	`generalhan`	`i thought that was a different option`
`20:38.42`	`Qwell[]`	`maybe..`
`20:38.46`	`_Paulo_`	`with sudo you dont need suidperl`
`20:38.57`	`generalhan`	`right thats what i though`
`20:39.04`	`generalhan`	`so any ideas why it still doesnt work ?`
`20:39.07`	`*** join/#asterisk RoyK (n=roy@10.80-203-106.nextgentel.com)`
`20:39.33`	`_Paulo_`	`the script is setuid ?`
`20:39.41`	`Qwell[]`	`heh, that helps too`
`20:39.43`	`_Paulo_`	`chamod 4755`
`20:39.43`	`generalhan`	`#!/usr/bin/suidperl`
`20:40.16`	`_Paulo_`	`the 4 ist the setuid bit for user`
`20:40.25`	`sevard`	`i don't suppose this might have anything to do with it`
`20:40.26`	`sevard`	`May 17 15:38:02 WARNING[14111]: chan_zap.c:10879 setup_zap: Ignoring signalling`
`20:40.31`	`_Paulo_`	`use 6 for user and group`
`20:41.10`	`_Paulo_`	`i have to go to a meeting now...`
`20:41.21`	`generalhan`	`_Paulo_: so chmod 4775 /var/www/html/trial.cgi`
`20:41.27`	`Qwell[]`	`generalhan: yes`
`20:41.30`	`generalhan`	`k well ... thanks for the help`
`20:41.32`	`Qwell[]`	`or 6775...up to you`
`20:41.39`	`justinu\|laptop`	`sevard: that's normal for a reload chan_zap.so`
`20:41.41`	`generalhan`	`Qwell[]: i just tried both and still the same error`
`20:41.59`	`Ironhand`	`sorry if this is a stupid question, but... what is the usual way for an agi script called from a dialplan to initiate an outgoing call? I can seem to find any relevant command in the agi command reference`
`20:42.06`	`sevard`	`k, i figured it was just taking it down while reinitializing, but wanted to make sure`
`20:42.08`	`r_evolution`	`s`
`20:42.20`	`justinu\|laptop`	`sevard: oh, when you're tuning gains, you need to completely stop and restart asterisk`
`20:42.21`	`r_evolution`	`s'good ahrimanes... gotta follow some form of protocol at work ;x`
`20:44.26`	`generalhan`	`Qwell[]: now im getting this for my error log : Can't do setegid!`
`20:44.31`	`*** join/#asterisk daigonsai (n=chatzill@68.63.24.45)`
`20:44.45`	`Assid`	`err.. anyone ever set a bitmap to polycom phones?`
`20:44.52`	`Ironhand`	`ok, nevermind, I figured it out [insert slapping of forehead]... knew it had to be something obvious (exec)`
`20:44.54`	`Qwell[]`	`generalhan: try 4775 then`
`20:45.15`	`daigonsai`	`hi all`
`20:45.16`	`Assid`	`VoicePulse: you there?`
`20:45.18`	`generalhan`	`Qwell[]: ok that got rid of that ...`
`20:45.30`	`generalhan`	`now to figure out why it is still giving me permission issues`
`20:45.50`	`generalhan`	`and its only to that folder ... i can move it anywhere else but there`
`20:46.11`	`*** join/#asterisk esculapio__ (n=elvyn@200.88.44.66)`
`20:46.11`	`protocoldoug`	`i'm trying to get asterisk / fwd working together, and when i have fwd makes the test call...`
`20:46.14`	`*** join/#asterisk pattieja (n=pcxuser@c-67-163-29-136.hsd1.il.comcast.net)`
`20:46.16`	`protocoldoug`	`i get: http://pastebin.com/723357`
`20:46.50`	`justinu\|laptop`	`protocoldoug: set dtmfmode=rfc2833 in your peer entry for fwd`
`20:47.08`	`protocoldoug`	`justinu\|laptop, many thanks :)`
`20:47.08`	`*** join/#asterisk jahani (n=k@adsl196-107-220-217-196.adsl196-15.iam.net.ma)`
`20:47.55`	`esculapio__`	`ls /var/log/gdm/`
`20:48.02`	`daigonsai`	`got a question... a friend of mine is connecting an Asterisk box to his employer's existing phone system, and needs to send a hook flash to that existing system.`
`20:48.29`	`*** join/#asterisk Gunnar (n=gunnar@34.80-203-209.nextgentel.com)`
`20:48.59`	`daigonsai`	`He can't seem to stop Asterisk from intercepting the hook flash. Any ideas where he should look to fix this?`
`20:49.10`	`Assid`	`hrmm back to provider hunting..`
`20:49.31`	`Assid`	`anyone know of any decent ones.. < 1.5c/min ?`
`20:49.36`	`batphone`	`man`
`20:49.55`	`batphone`	`is there a macro i can use... that makes sure someone isnt forwarding their damned phone to itself?`
`20:50.06`	`batphone`	`and STILL use caller ID effectively?`
`20:50.21`	`batphone`	`i dont want to have to mess with caller id on every system i have..`
`20:50.26`	`r_evolution`	`you could always do an idiot check bat :)`
`20:51.05`	`batphone`	`dare i ask..`
`20:51.37`	`r_evolution`	`no i mean... randomly walk around and pull the BOFH stunts.`
`20:51.48`	`r_evolution`	`but what do you mean fwd'ing to itself?`
`20:51.54`	`r_evolution`	`as in you have a macro setup for fowarding`
`20:52.11`	`r_evolution`	`and people are actually entering their DID into the 'forward to this number' ?`
`20:52.13`	`batphone`	`GotoIf([${CALLER} = "IDIOT"]?,bla)`
`20:52.17`	`r_evolution`	`haha`
`20:52.23`	`SplasPood`	`Anyone here have experience with RNK Telecom ?`
`20:52.29`	`r_evolution`	`Eye Dee 10 Tee error`
`20:52.34`	`batphone`	`its not working`
`20:52.39`	`r_evolution`	`yeah we used them for orig at one point Splas`
`20:52.48`	`SplasPood`	`r_evolution: why no longer?`
`20:52.51`	`batphone`	`because sip.conf is setting either a context or a caller id other than the extension number itself`
`20:53.12`	`r_evolution`	`eh. we changed providers... and they wanted too large of a deposit for what we were trying to do`
`20:53.15`	`batphone`	`SplasPood: ive worked with some pretty rank telecom providers before`
`20:53.15`	`SplasPood`	`I just signed up with them, mostly for termination.. and so far I'm not exactly happy with the quality of service, and VERY unhappy with the quality of the support staff I've dealt with`
`20:53.22`	`*** join/#asterisk [Airwolf] (n=airwolf@83.98.235.219)`
`20:53.29`	`r_evolution`	`why not set the caller ID in the sip.conf then bat?`
`20:53.36`	`r_evolution`	`hey splas... try the guys we're working with now...`
`20:53.40`	`r_evolution`	`they piggyback on L3`
`20:53.47`	`batphone`	`because people need did's in the real world`
`20:53.47`	`r_evolution`	`www.commercetel.com`
`20:53.55`	`SplasPood`	`r_evolution: its looking like I'll be playing this game again shortly, so I'll make note of them`
`20:54.11`	`batphone`	`this is a bug in asterisk`
`20:54.24`	`r_evolution`	`ok... explain to me what you're trying to do bat and i'll throw you an idea if i have one`
`20:54.31`	`justinu\|laptop`	`there are lots of bugs`
`20:54.41`	`Assid`	`yeah`
`20:54.45`	`Assid`	`hrmm. i wanna learn AEL`
`20:54.51`	`SplasPood`	`RNK support person just asked me to define what CONGESTION means`
`20:54.53`	`batphone`	`r_evolution: say you run a call center`
`20:54.58`	`r_evolution`	`i do`
`20:55.00`	`Ahrimanes`	`Assid: you WANT grey hair? :P`
`20:55.00`	`r_evolution`	`actually :)`
`20:55.01`	`Assid`	`seems to be "easier" and more versatile.. if you know what you doing`
`20:55.15`	`batphone`	`r_evolution: some asshat uses his ip301 to fwd all his calls to his extension`
`20:55.27`	`Assid`	`Ahrimanes: nah.. im coding in php anyways.. would feel more at home`
`20:55.33`	`batphone`	`r_evolution: what we need is a way to handle that, like maybe running a zap channel up his chair`
`20:55.36`	`*** join/#asterisk MoutaPT (n=MoutaPT@85.139.196.147)`
`20:55.49`	`batphone`	`r_evolution: that way, when he does that and someone dials his number, he gets popped`
`20:55.55`	`Ahrimanes`	`Assid: ah php, so already grey hair :)`
`20:55.58`	`MoutaPT`	`Hello Any SIP SDK open source to integrate a SIP phone in an app?`
`20:56.10`	`MoutaPT`	`i'm planing to use it with ASterisk`
`20:56.25`	`MoutaPT`	`but don't now if sipX SDK is ok`
`20:56.27`	`batphone`	`r_evolution: an idiotcheck() function would be just the thing`
`20:56.34`	`Ahrimanes`	`MoutaPT: google for "sip sdk" finds quite a bit`
`20:56.35`	`Assid`	`Ahrimanes: not really.. i find it fun`
`20:56.41`	`Ahrimanes`	`:D`
`20:56.43`	`batphone`	`r_evolution: then we could use that to act accordingly, conditionally`
`20:56.47`	`Assid`	`am thinking of challenging mysrelf with new ways`
`20:57.28`	`r_evolution`	`that works bat...`
`20:57.37`	`r_evolution`	`zap y0 dumb ass!`
`20:57.53`	`r_evolution`	`Why not disable his forwarding ability in the polycom?`
`20:58.02`	`r_evolution`	`or`
`20:58.12`	`*** join/#asterisk rva (n=rafa@200.210.51.130)`
`20:58.14`	`r_evolution`	`pull the calling number out of the string`
`20:58.21`	`r_evolution`	`and compare it to the CALL TO number`
`20:58.23`	`r_evolution`	`and if it's the same`
`20:58.34`	`r_evolution`	`Playback (idiot)`
`20:58.56`	`rva`	`hi guys....i have to pound key working for transfer`
`20:58.57`	`r_evolution`	`I'm sorry but the person you have called is an idiot... and has tried to forward this call to the same number you just called. Please ask your friend to buy a fucking clue.`
`20:59.10`	`Assid`	`err.. nah`
`20:59.11`	`rva`	`but when 2 asterisks are connected, the pound runs transfer in the remote machine!`
`20:59.14`	`Assid`	`you know what`
`20:59.14`	`rva`	`is it normal?`
`20:59.23`	`Assid`	`make it call back`
`20:59.30`	`Assid`	`to the same number its calling from`
`20:59.34`	`*** join/#asterisk Gamercjm (n=chris@pool-71-254-185-148.lsanca.fios.verizon.net)`
`21:00.11`	`r_evolution`	`i like my idea better :(`
`21:00.12`	`r_evolution`	`http://www.i-am-bored.com/bored_link.cfm?link_id=15862`
`21:00.25`	`r_evolution`	`x-men in 9 days :-D`
`21:00.54`	`Ahrimanes`	`hehe`
`21:01.02`	`r_evolution`	`aiit suckas. im out`
`21:01.09`	`MoutaPT`	`pingtel sip phone works fine with asterisk?`
`21:01.14`	`r_evolution`	`ps`
`21:01.15`	`Qwell[]`	`MoutaPT: should`
`21:01.18`	`r_evolution`	`you guys need to view that`
`21:01.23`	`r_evolution`	`YEAAHHH!! IM THE JUGGERNAUT BITCH!`
`21:01.42`	`the_juggernaut_b`	`heh.`
`21:01.47`	`Qwell[]`	`juggernaut's`
`21:02.11`	`r_evolution\|afk`	`trust. click the link.`
`21:02.18`	`r_evolution\|afk`	`yeah charles i beat tha shit outta ya...`
`21:02.45`	`justinu\|laptop`	`pingtel sip phone does work with asterisk yes, i have one`
`21:03.03`	`MoutaPT`	`thks justinu!`
`21:03.52`	`[Airwolf]`	`Is it normal that SIP phones send a # as %23 to Asterisk ?`
`21:03.53`	`*** part/#asterisk rva (n=rafa@200.210.51.130)`
`21:04.22`	`Qwell[]`	`[Airwolf]: there are some that do..`
`21:04.33`	`generalhan`	`Qwell[]: you know what .... this solution that we have been chasing i think is all for nothing ... i can su apache and do the "mv" cmd maunally and it works perfectly. so it doesnt make any sense that it wouldnt work other wise`
`21:04.49`	`*** part/#asterisk diclophis (n=diclophi@65.203.37.58)`
`21:04.55`	`Qwell[]`	`generalhan: heh, fun`
`21:04.55`	`[Airwolf]`	`Qwell, do you know the best way to handle that in a dialplan ?`
`21:05.02`	`Qwell[]`	`[Airwolf]: no clue`
`21:05.10`	`[Airwolf]`	`hmm ok`
`21:05.17`	`Qwell[]`	`[Airwolf]: Is this a newer version of *?`
`21:05.23`	`generalhan`	`Qwell[]: i need to call on a script from that script that will do the "mv" cmd for me !`
`21:05.24`	`Qwell[]`	`iirc, it should "fix" it`
`21:05.40`	`[Airwolf]`	`Qwell, just 1.2.7`
`21:05.46`	`Qwell[]`	`dunno then`
`21:05.55`	`[Airwolf]`	`ok`
`21:10.37`	`xp_lunch`	`I am in the asterisk manager interface using the api to do an originate and it says permission denied, how do I fix that?`
`21:10.50`	`Qwell[]`	`xp_lunch: give your account permission in manager.con`
`21:10.51`	`Qwell[]`	`f`
`21:11.04`	`Qwell[]`	`Did I just fat finger an n, with enter?`
`21:11.08`	`*** join/#asterisk davewise (i=icechat5@66.251.196.193)`
`21:11.13`	`sevard`	`alright`
`21:11.14`	`xp_lunch`	`it needs write permission right?`
`21:11.26`	`sevard`	`somebody needs to explain dtmf rxgain black magic.`
`21:11.29`	`Qwell[]`	`xp_lunch: edit manager.conf...you'll see it`
`21:11.39`	`xp_lunch`	`Qwell[] do you understand the originate api command?`
`21:11.54`	`Qwell[]`	`yes`
`21:12.44`	`*** part/#asterisk dwclarkNU (i=dwclarkN@155.33.196.236)`
`21:12.46`	`xp_prg`	`I have been told that if you make an originate command with an extention once it connects to the Channel, it will automatically connect the call to the extension, is that true?`
`21:13.00`	`Qwell[]`	`yes`
`21:13.04`	`davewise`	`Has anyone hear of TLS and SRTP being in the current build of asterisk?`
`21:13.11`	`Qwell[]`	`davewise: no`
`21:13.40`	`xp_prg`	`thanks Qwell[]!`
`21:14.01`	`xp_prg`	`what I am trying to do is have asterisk call someone and play them a pre-recorded message`
`21:14.08`	`davewise`	`(This is what I read on a SourceForge project, suposedly supported by Google and Digum... would you like the link?)`
`21:14.38`	`xp_prg`	`the extention will have the playback command`
`21:14.48`	`xp_prg`	`Qwell[] am I going about that right?`
`21:15.02`	`*** join/#asterisk hads (n=hads@mail.nice.net.nz)`
`21:16.04`	`Qwell[]`	`sure`
`21:16.34`	`justinu\|laptop`	`xp_prg, like i told you yesterday, yes...`
`21:16.41`	`justinu\|laptop`	`you can also drop a call file in the spool directory`
`21:16.41`	`xp_prg`	`ok, just confirming it :)`
`21:16.57`	`xp_prg`	`justinu\|laptop I can't do that with the managerapi though, can I?`
`21:17.21`	`justinu\|laptop`	`they're the same thing... either send an originate action thru manager API, or drop a call file in the right directory`
`21:17.22`	`Ahrimanes`	`no that can be done with echo though`
`21:17.49`	`MoutaPT`	`davewise can you show me the link`
`21:17.49`	`xp_prg`	`ok cool, well I want to do it with the manager api`
`21:18.04`	`sevard`	`Does anyone have issues with cellphones and dtmf?`
`21:18.42`	`droops`	`i havent`
`21:18.44`	`CunningPike`	`sevard: I saw a posting on the list today that mentioned that lengthening the digittimeout helps`
`21:18.59`	`sevard`	`Where does one set that?`
`21:19.07`	`CunningPike`	`In your dialplan`
`21:19.27`	`CunningPike`	`sevard: Before your DTMF read`
`21:19.53`	`sevard`	`got it, testing...`
`21:20.41`	`sevard`	`yeah, see, i'm trying to get it to read 1234567890 and it's getting stuff like 124 and 12346 before it kicks me out and says invalid`
`21:21.03`	`*** join/#asterisk ghost99 (n=neville@222-153-92-225.jetstream.xtra.co.nz)`
`21:21.05`	`*** join/#asterisk MacDome (n=eseidel@A17-255-105-166.apple.com)`
`21:21.29`	`justinu\|laptop`	`spotty dtmf recognition can be caused by messed up gains too`
`21:21.46`	`sevard`	`we've been playing with the gains for the last 12 hours`
`21:21.50`	`sevard`	`CID works now`
`21:22.27`	`sevard`	`i think it was a configuration problem at our telco, because the settings are the same as they ever were, and it's working fine on a rather large range`
`21:22.30`	`*** part/#asterisk Vorondil (n=jkiffmey@miro.voltaiccommerce.com)`
`21:22.40`	`sevard`	`like -6 to 10 range`
`21:22.50`	`justinu\|laptop`	`hmm`
`21:23.01`	`davewise`	`Asterisk over TCP and TLS at : http://savannah.nongnu.org/projects/asterisk-tcp`
`21:23.59`	`generalhan`	`OMG i hate * permissions ... im NEVER gonna get this to work ! damnit`
`21:24.23`	`sevard`	`permissions are a pain. you just basically have to chown everything it complains about to uid asterisk`
`21:24.24`	`Assid`	`* permissions?`
`21:24.34`	`Assid`	`err`
`21:24.38`	`justinu\|laptop`	`never say never`
`21:24.43`	`davewise`	`*MoutaPT Did you get ehe link?`
`21:24.43`	`Assid`	`you need to start asterisk with the right -U`
`21:24.45`	`Assid`	`and -G`
`21:24.48`	`*** join/#asterisk MacDome (n=eseidel@A17-255-105-166.apple.com)`
`21:25.15`	`sevard`	`/var/log/asterisk, /var/lib/asterisk, a billion other things`
`21:26.12`	`*** join/#asterisk Tier_1 (n=Tier@c-24-9-75-234.hsd1.co.comcast.net)`
`21:26.22`	`generalhan`	`sevard: im trying to move a .call call file into the var/spool/asterisk/outgoing directory from a perl script but no matter how i do it a always get permission denied in the error_log`
`21:26.43`	`De_Mon`	`chown asterisk.asterisk / -R`
`21:26.43`	`sevard`	`run the script as the same uid as asterisk, that ought to work fine`
`21:26.47`	`Tier_1`	`ok what would you lookfor to playback a file or a input to a answering line`
`21:26.56`	`sevard`	`and don't follow De_Mon's advice`
`21:26.57`	`*** join/#asterisk davewise (i=icechat5@66.251.196.193)`
`21:27.09`	`generalhan`	`sevard: i am ... im even using suidperl and the script is owned by the same user that runs asterisk`
`21:27.28`	`sevard`	`chmod u+s <file>`
`21:27.47`	`sevard`	`where <file> is the path/name of the script`
`21:27.59`	`*** join/#asterisk thejdt (n=thejdt@p46.11.dsl.strencom.net)`
`21:29.34`	`*** join/#asterisk autobus (n=autobus@80.172.14.203)`
`21:30.04`	`generalhan`	`sevard: still no go .. and when i do a ls -al on the temp dir. that i make the file in ... its creating it with apache as the owner. thats what i need to stop`
`21:30.08`	`autobus`	`its possible help-me in extensions.conf?`
`21:31.19`	`*** join/#asterisk nagl (n=nagl@86.59.54.237)`
`21:31.21`	`*** join/#asterisk terrapen (n=cjs@166.70.183.108)`
`21:31.36`	`autobus`	`what is the comand necessary for separation the comanda exten => 100,2,Hangup() and exten => h,1,System(/var/lib/asterisk/scripts/callback.sh ${CALLERID(num)}) for 5 seconds?`
`21:31.36`	`thejdt`	`anyone have Cisco 7940 fw 7.3 or greater?`
`21:31.39`	`*** join/#asterisk camelon (n=chiardon@201.228.4.153)`
`21:31.53`	`Qwell[]`	`thejdt: only skinny`
`21:32.02`	`camelon`	`Hello`
`21:33.00`	`camelon`	`has asterisk something like an "call auditing system available" ?`
`21:33.05`	`Ironhand`	`how would I let an AGI script automatically terminate a call X minutes after dialling? (which is done by the same script)`
`21:33.50`	`davewise`	`Hello MoutaPT?`
`21:34.22`	`batphone`	`sup with this`
`21:36.10`	`sevard`	`autobus: wait 5`
`21:37.15`	`autobus`	`its possible use this command after one hangup command?`
`21:37.55`	`sevard`	`don't see why not`
`21:39.04`	`autobus`	`this is correct:`
`21:39.05`	`autobus`	`[callback]`
`21:39.05`	`autobus`	`exten => 100,1,Set(CALLER=${CALLERID(num)})`
`21:39.05`	`autobus`	`exten => 100,2,Hangup()`
`21:39.05`	`autobus`	`exten => 100,3,Wait,2`
`21:39.05`	`autobus`	`exten => h,1,System(/var/lib/asterisk/scripts/callback.sh ${CALLERID(num)})`
`21:39.17`	`sevard`	`Wait(2)`
`21:39.30`	`*** join/#asterisk Dr-Linux (n=Linux@202.59.73.131)`
`21:39.31`	`sevard`	`and it should be in the h, not the 100`
`21:39.38`	`sevard`	`h,1,Wait(2)`
`21:39.43`	`sevard`	`h,2,System...`
`21:39.49`	`autobus`	`hum ok`
`21:40.00`	`autobus`	`im trying`
`21:40.12`	`sevard`	`that's two seconds, though, not five`
`21:40.17`	`autobus`	`yes`
`21:40.23`	`autobus`	`its one example only`
`21:40.41`	`*** join/#asterisk [TK]D-Fender (n=joe@66.11.164.239)`
`21:40.44`	`Assid`	`err... how do i make a queue such that the person waits only 45 seconds... else jumps to voicemail`
`21:41.01`	`[TK]D-Fender`	`Assid : set the timeout on the Queue line`
`21:41.04`	`sevard`	`put the timeout on the queue to 45 seconds`
`21:41.20`	`Dr-Linux`	`Assid: yep as i did`
`21:41.27`	`[TK]D-Fender`	`Still too slow young grasshopper!`
`21:41.27`	`sevard`	`and then exten=t jumps to vm`
`21:41.27`	`docelm0`	`OI!`
`21:41.36`	`sevard`	`OY!`
`21:41.50`	`sevard`	`docelm0: how far have you gotten on your weather script you lazy bitch`
`21:41.55`	`[TK]D-Fender`	`sevard : Doesn't land on "t" after leaving queue!`
`21:42.04`	`sevard`	`it does when it times out`
`21:42.19`	`[TK]D-Fender`	`sevard : Nope.. just goes on, and sets the queue exit reason variable`
`21:42.28`	`docelm0`	`I am done.. Just have to debug it.. And I am working on C code right now`
`21:42.34`	`sevard`	`goes on to where`
`21:42.38`	`docelm0`	`not overly worried about that script right now`
`21:42.57`	`[TK]D-Fender`	`sevard : Next step in the dialplan. its up to you to find out WHY it aborted because there are multiple causes possible`
`21:43.00`	`sevard`	`docelm0: i'm just joshing you`
`21:43.12`	`sevard`	`alrighty, good enough, stuff vm there then`
`21:43.20`	`docelm0`	`I have to code a "retail" system for a client.. so Im a bit busy with that.`
`21:44.45`	`_Paulo_`	`hi, im back`
`21:44.45`	`_Paulo_`	`generalhan, still bad?`
`21:46.12`	`nextime`	`interesting, calling agentcallbacklogin from a at168 phone all is working, calling it from an iaxy * segfault`
`21:47.02`	`generalhan`	`_Paulo_: yep ... sevard is walking me through some stuff right now ...`
`21:47.21`	`*** join/#asterisk kpettit (n=keith@adsl-70-241-85-138.dsl.hstntx.swbell.net)`
`21:47.51`	`*** join/#asterisk Estaga (n=fbotha@lagged.za.net)`
`21:47.53`	`Estaga`	`hi`
`21:47.59`	`kpettit`	`HI all. I'm having a loop problem in *. If somebody fowards their phone to there own extension then calls it, it creates a loops that basically kills asterisk. ANy way to stop that?`
`21:48.25`	`[TK]D-Fender`	`kpettit : Yeah, code a sane dialplan ;)`
`21:48.36`	`Assid`	`err.. how do you logout an agent again?`
`21:48.44`	`Assid`	`with AgentCallbackLogin ?`
`21:49.09`	`Estaga`	`is there a SayDigits dialplan alternative that will say . ? as in Credit is 0.02c ? SayDigits reads it as 002 ):`
`21:49.14`	`DrPete`	`Are there any numbers I should avoid for my extensions?`
`21:49.22`	`kpettit`	`[TK]D-Fender, I've got one. THere are some kids at a call center that are purposly trying to jack it. How can I prevent somebody from fowarding there phone to there own extension?`
`21:49.59`	`nextime`	`Assid : calling AgentCallbackLogin(${CALLERIDNUM}) without any other parameter, and inserting an empty new extension when answered`
`21:50.10`	`sevard`	`saydigits(0), playback(point), saydigits(02)`
`21:50.21`	`Estaga`	`Sedorox, ... my alternative yes ):`
`21:50.22`	`[TK]D-Fender`	`kpettit : test to see if they are calling themselves in your dialpland and hang up`
`21:50.24`	`kpettit`	`* isn't smart enough to detect the loop, and I can't figure out a way to do a check to make sure someobyd isn't calling themselves in the dial statlemtn`
`21:50.42`	`nextime`	`anywaqy`
`21:50.52`	`[TK]D-Fender`	`kpettit : You don't do it in the dial STATEMENT, but rather in lines preceeding it`
`21:50.53`	`kpettit`	`[TK]D-Fender, how would you suggest I do that?`
`21:50.54`	`nextime`	`it's a some-time-ago trunk version`
`21:51.06`	`nextime`	`maybe it's better to upgrade it`
`21:51.10`	`[TK]D-Fender`	`kpettit : verify the callerID.`
`21:51.26`	`[TK]D-Fender`	`EXTEN = CALLERID = HANGUP`
`21:51.38`	`mercestes`	`Something like $[${DNID} = ${CALLERIDNUM}]? maybe but the callerID would have to match the dialed digits.`
`21:52.04`	`mercestes`	`would be better if there was a way to match originating Sip username to the terminating Sip Username...`
`21:52.08`	`*** join/#asterisk revslowmo (n=revslowm@adsl-66-218-36-163.dslextreme.com)`
`21:52.24`	`*** join/#asterisk shido6 (n=shido6@d221-68-200.commercial.cgocable.net)`
`21:52.45`	`*** join/#asterisk stack_ (n=stack@63.239.190.202)`
`21:53.29`	`FuriousGeorge`	`so now that someone is maintaining the portage ebuild for gentoo of asterisk (its actually 1.2.7.1) does anyone recommend using it?`
`21:53.31`	`stack_`	`We have a faxed hooked up to an ATA box. When it dials out, our PRI is hanging up on the call. I believe the CNG tone is causing a hangup somehow. Anyone know how to fix this?`
`21:53.35`	`kpettit`	`mercestes, maybe we 1,EXTEN=CALLERID=HANGUP then do 2,Setcallerid.... 3,Dial like that`
`21:53.47`	`revslowmo`	`Anyone have a solution for this? http://forums.digium.com/viewtopic.php?t=6665`
`21:54.00`	`kpettit`	`FuriousGeorge, using it on a few production boxes and it's been working great`
`21:54.16`	`nextime`	`uhmm`
`21:54.17`	`[TK]D-Fender`	`revslowmo : First fix that incoming context that doesn't exist....`
`21:54.20`	`batphone`	`ok.. ls /var/log/asterisk/event_log*\|wc -l = 80,000??`
`21:54.26`	`batphone`	`these files are all empty!`
`21:54.47`	`revslowmo`	`[TK]D-Fender: Ok..`
`21:54.57`	`FuriousGeorge`	`batphone: maybe your text editor is taking a while to display the text`
`21:55.07`	`FuriousGeorge`	`my nano lags quite a bit when opening logs`
`21:55.15`	`*** join/#asterisk Flauto (n=zhao@adsl-75-3-132-61.dsl.chcgil.sbcglobal.net)`
`21:55.21`	`batphone`	`wtf does my text editor have to do with how many files asterisk puts in that directory`
`21:55.23`	`Flauto`	`May 17 16:52:14 NOTICE[7239]: chan_iax2.c:1598 iax2_destroy: Avoiding IAX destroy deadlock`
`21:55.28`	`Flauto`	`what is this`
`21:55.57`	`*** join/#asterisk \|dennis\| (i=dennis@200.32.215.84)`
`21:55.59`	`FuriousGeorge`	`batphone: wc is word count`
`21:55.59`	`dlynes_office`	`batphone: do you have automatic log rotation turned on?`
`21:56.02`	`*** join/#asterisk bjohnson (n=bjohnson@i216-58-58-202.cybersurf.com)`
`21:56.19`	`syle`	`vi can support long lined files`
`21:56.22`	`batphone`	`FuriousGeorge: ls /var/log/asterisk/event_log*\|wc -l`
`21:56.25`	`syle`	`nano/pico woudl crash`
`21:56.29`	`batphone`	`this will list the number of files in that directory`
`21:56.31`	`dlynes_office`	`batphone: i.e. do you have a cron event that does asterisk -rx "logger rotate"?`
`21:56.33`	`FuriousGeorge`	`batphone: my bad`
`21:57.00`	`batphone`	`dlynes_office: its putting a file there every 2 seconds or something. i dont think logrotate is gonna help`
`21:57.07`	`dlynes_office`	`batphone: ah`
`21:57.15`	`dlynes_office`	`batphone: which version of asterisk? trunk?`
`21:57.24`	`batphone`	`1.2.7.1`
`21:57.28`	`dlynes_office`	`damn`
`21:57.39`	`dlynes_office`	`batphone: is asterisk restarting every 2 seconds?`
`21:57.42`	`batphone`	`most of them are 0 byte files`
`21:57.45`	`batphone`	`no`
`21:58.06`	`dlynes_office`	`batphone: what's your full log telling you?`
`21:58.19`	`batphone`	`i have to re-write the init script every time just to keep the init script from running a million asterisks`
`21:58.35`	`Assid`	`<PROTECTED>`
`21:58.35`	`Assid`	`<PROTECTED>`
`21:58.38`	`Assid`	`status unknown ?`
`21:58.39`	`batphone`	`im still in the process of unlinking these files, 1 sec`
`21:58.44`	`batphone`	`full log?`
`21:58.45`	`batphone`	`what do you mean`
`21:58.49`	`Assid`	`why isnt it going to the t extension ?`
`21:58.53`	`dlynes_office`	`/var/log/asterisk/full`
`21:59.18`	`syle`	`here is my init script, it goes in /etc/rc.d/rc.local lol /usr/bin/screen -L -d -m -S asterisk /bin/nice -n -19 /usr/sbin/asterisk -U asterisk -vvvgc`
`21:59.19`	`dlynes_office`	`Assid: why should it? you terminated with an error, not a timeout`
`21:59.22`	`FuriousGeorge`	`i got this "pager foghorn" which is hooked up to a phone im replacing via rj-11. there is no way to somehow convert that to 3.5mm minijack for chan dsp`
`21:59.26`	`FuriousGeorge`	`is there?`
`21:59.51`	`Qwell[]`	`use a tiny funnel`
`21:59.52`	`enkrypted`	`what are some common reasons why a sip negotiation would succeed, but only 1-way rtp? I can receive calls, but I cannot hear the caller and they can hear me.`
`21:59.59`	`Qwell[]`	`enkrypted: firewall`
`22:00.10`	`dlynes_office`	`~nat`
`22:00.12`	`jbot`	`nat is, like, Network Address Translation Usable in Asterisk sip.conf file with externip, localnet, and localmask setup properly. See docs.`
`22:00.18`	`enkrypted`	`they do not have a firewall and I have forwarded many sets of ports`
`22:00.28`	`enkrypted`	`I know this is a common thing, sorry.`
`22:00.30`	`Qwell[]`	`file: What now?`
`22:00.39`	`dlynes_office`	`enkrypted: if they don't have a firewall, how are you forwarding ports?`
`22:00.54`	`Assid`	`dlynes_office: no.. i just put a timeout in the Queue()`
`22:01.06`	`dlynes_office`	`Assid: but it's not timing out`
`22:01.09`	`enkrypted`	`i'm forwarding 5060,rtp set to 20k-25k and i read to forward 8000-8012 but I don't know why`
`22:01.13`	`dlynes_office`	`Assid: therefore, t will never be encountered`
`22:01.18`	`enkrypted`	`the 8k fwds didnt change anything`
`22:01.22`	`dlynes_office`	`Assid: you're getting a call error on iax`
`22:01.34`	`justinu\|laptop`	`if you're behind a NAT, you need to set externip= and localnet= in sip.conf`
`22:01.36`	`Assid`	`nah.. if i remove the timeout it works`
`22:01.38`	`batphone`	`i dont have a full log`
`22:01.41`	`batphone`	`might have deleted it`
`22:01.41`	`batphone`	`lol`
`22:01.42`	`justinu\|laptop`	`like the bot said`
`22:01.59`	`enkrypted`	`sorry thanks`
`22:02.19`	`dlynes_office`	`justinu\|laptop: but he said he's not using a firewall :)`
`22:02.26`	`FuriousGeorge`	`i think it his file trigger`
`22:02.31`	`enkrypted`	`i am using a firewall the other user was not`
`22:02.45`	`file`	`when ever someone says my nick it flashes on my screen`
`22:02.50`	`file`	`so it catches my attention frequently`
`22:02.52`	`dlynes_office`	`enkrypted: ah...I didn't see you say that anywhere, previously`
`22:02.55`	`Assid`	`dlynes_office: if i remove the \|\|10 it works fine`
`22:03.04`	`enkrypted`	`dlynes_office: misunderstanding`
`22:03.05`	`Assid`	`just stays in the queue`
`22:03.05`	`[TK]D-Fender`	`file file file file file file file file file file file file file file file file file file file file file file file file file file file file file`
`22:03.09`	`file`	`:D`
`22:03.09`	`Ahrimanes`	`hehe`
`22:03.12`	`dlynes_office`	`Assid: \|\|10 means give up after 10 seconds`
`22:03.20`	`Assid`	`yes`
`22:03.20`	`batphone`	`here we go`
`22:03.20`	`_Paulo_`	`lo`
`22:03.22`	`_Paulo_`	`lol`
`22:03.25`	`batphone`	`58 mb of master.csv`
`22:03.26`	`batphone`	`nice`
`22:03.26`	`file`	`I just fixed a sort of major bug in trunk's chan_sip :D`
`22:03.30`	`Assid`	`i know that.. testing at 10 secons.. i dont wanna wait forever`
`22:03.37`	`dlynes_office`	`Assid: i.e. it will never time out...after ten seconds, it'll just fail`
`22:03.52`	`Assid`	`how do i make it timeout after 10 seconds?`
`22:04.05`	`[TK]D-Fender`	`file file file file file file file file file file`
`22:04.08`	`dlynes_office`	`Assid: Set(RESPONSE(timeout)=10)`
`22:04.08`	`file`	`BAH`
`22:04.15`	`[TK]D-Fender`	`:D`
`22:04.16`	`file`	`I know roughly where you live!`
`22:04.22`	`Assid`	`oh`
`22:04.24`	`dlynes_office`	`Assid: assuming you're waiting for user input, and not a line to ring`
`22:04.28`	`FuriousGeorge`	`so like i was saying, i got this foghorn which interfaces with a phone what allows for an external speakerphone/headset via rj-11. is there any way to convert that to something i can use with chan/dsp. it would save me from having to buy an amp and a speaker`
`22:04.40`	`Assid`	`err.. waiting for agent to answer the call`
`22:04.57`	`xp_prg`	`in the extensions.conf is there a way to call a custom script somehow?`
`22:05.07`	`file`	`ut roh`
`22:05.14`	`jake1932`	`xp_prg: like a perl script?`
`22:05.16`	`xp_prg`	`ya`
`22:05.20`	`jake1932`	`xp_prg: AGI`
`22:05.33`	`FuriousGeorge`	`s/what/that`
`22:05.50`	`jake1932`	`http://www.voip-info.org/wiki-Asterisk+AGI`
`22:05.56`	`Assid`	`nevermnd`
`22:05.57`	`Assid`	`got it`
`22:06.09`	`Assid`	`apparently you need to put it in next priority`
`22:06.14`	`xp_prg`	`exten => 660,1,Playback(demo-echotest) is what I have now, what would I put to call the perl script?`
`22:06.23`	`FuriousGeorge`	`if not can anyone recommend a cheap and LOUD horn/speaker that will work with a soundcard`
`22:06.37`	`FuriousGeorge`	`or amp/speaker setup that obviously does the same`
`22:07.47`	`jake1932`	`xp_prg:forgot to ask - to you need the script to interact w asterisk?`
`22:07.55`	`jake1932`	`s/to/do`
`22:07.57`	`xp_prg`	`yes`
`22:08.19`	`jake1932`	`xp_prg: check out the link - it has lotsa info`
`22:09.29`	`nextime`	`ok, solved`
`22:10.00`	`batphone`	`file: what did you find in chan_sip ?`
`22:10.19`	`file`	`...look at the commit list and you'll see...`
`22:10.21`	`revslowmo`	`DigitTimeout is deprecated, what is the correct method in the config now?`
`22:10.38`	`revslowmo`	`timeout(digit)=5 ?`
`22:10.48`	`batphone`	`file: im having trouble with someone fowarding their extension to themselves`
`22:10.52`	`batphone`	`file: this crashes the pbx`
`22:10.54`	`file`	`that's not what I fixed.`
`22:10.59`	`xp_prg`	`jake1932 what would be an example of an entry in extensions.conf that uses agi ?`
`22:11.00`	`file`	`then get a backtrace`
`22:11.16`	`batphone`	`file: this is a bug`
`22:11.21`	`jake1932`	`exten => s,1,AGI(agiexp)`
`22:11.26`	`file`	`yes, we have a bug tracker... so submit a bug...`
`22:11.31`	`file`	`with the proper information even!`
`22:11.34`	`syle`	`file aka Joshua Colp got accepted for the summer google of code, grats`
`22:11.45`	`file`	`syle: huh?`
`22:11.46`	`jake1932`	`congrats file`
`22:11.54`	`file`	`we aren't even running Summer of Code this year`
`22:12.05`	`xp_prg`	`how about this: exten => 660,1,AGI(exec("test.pl"))`
`22:12.12`	`file`	`silly people with outdated info`
`22:12.22`	`justinu\|laptop`	`haha`
`22:13.49`	`syle`	`this is pic of file: http://www.sineapps.com//images/file2.jpg`
`22:14.03`	`file`	`old pic`
`22:14.11`	`xp_prg`	`did everyone hear that skype is now free for outbound calls, even to physical phone numbers?`
`22:14.19`	`xp_prg`	`till the end of the year`
`22:14.21`	`jake1932`	`xp_prg: till the end of the year`
`22:14.34`	`jake1932`	`xp_prg: AGI(test.pl)`
`22:14.42`	`xp_prg`	`can skype be integrated with asterisk to take advantage of this somehow?`
`22:15.02`	`revslowmo`	`[TK]D-Fender: I fixed my context problem.`
`22:15.09`	`*** join/#asterisk jahani (n=k@41.250.12.31)`
`22:15.10`	`xp_prg`	`jake1932 where does test.pl exist physically, in /etc/asterisk?`
`22:15.25`	`jake1932`	`must be located in /var/lib/asterisk/agi-bin`
`22:15.26`	`Ahrimanes`	`xp_prg: i've tried a skype <-> asterisk call today..`
`22:15.41`	`xp_prg`	`Ahrimanes, wow how did it work?`
`22:15.49`	`Ahrimanes`	`xp_prg: poorly, hehe`
`22:16.00`	`xp_prg`	`what was wrong with it?`
`22:16.07`	`Qwell[]`	`file: no, file.jpg is an old pic`
`22:16.10`	`revslowmo`	`[TK]D-Fender: Do you think the card could be defective?`
`22:16.13`	`file`	`yes, even older`
`22:16.18`	`Qwell[]`	`file2, hasn't changed very much :P`
`22:16.37`	`Ahrimanes`	`xp_prg: call setup took VERY long`
`22:16.52`	`Ahrimanes`	`xp_prg: using psgw from http://www.rsdevs.com/`
`22:17.00`	`xp_prg`	`what do you mean call setup?`
`22:17.09`	`[TK]D-Fender`	`revslowmo : I seriously doubt it.`
`22:17.35`	`Ahrimanes`	`xp_prg: from the time i started hearing ring ring in my end until the other end actually started ringing`
`22:17.40`	`DrPete`	`Can a cisco 7960 show how many messages you have?`
`22:17.58`	`revslowmo`	`[TK]D-Fender: How would I debug the card to see if it detects off hook`
`22:18.01`	`Qwell[]`	`DrPete: with some xml services, sure`
`22:18.12`	`syle`	`well if that is old info then you must be 29 by now lol`
`22:18.16`	`xp_prg`	`Ahrimanes how long did it take?`
`22:18.27`	`Qwell[]`	`or, if you pay me, I could write code into chan_skinny, to dedicate a line to voicemail`
`22:18.31`	`Ahrimanes`	`xp_prg: hm not sure.. but more than 30 seconds afair`
`22:18.34`	`xp_prg`	`Ahrimanes pgsw is not free`
`22:18.35`	`DrPete`	`Qwell[]: thanks`
`22:18.40`	`Qwell[]`	`or, at the top where it shows an arbitrary name`
`22:19.01`	`DrPete`	`lol`
`22:19.05`	`xp_prg`	`is there any way to do it for free?`
`22:19.36`	`DrPete`	`I rememeber you said you liked skinny, so why do you think its better than sip?`
`22:19.57`	`Qwell[]`	`because it is better..`
`22:20.23`	`Qwell[]`	`features can actually be added by the pbx`
`22:20.29`	`drray`	`presence`
`22:20.38`	`Ahrimanes`	`xp_prg: never said it was free... and it's the only software for skype <-> sip i've seen`
`22:20.45`	`*** join/#asterisk killfill (n=killfill@freebsd.cl)`
`22:20.47`	`killfill`	`hi`
`22:20.58`	`*** join/#asterisk ozverenm (n=ozverenm@240.93.99-84.rev.gaoland.net)`
`22:20.59`	`killfill`	`im watching something wired going on with my asterisk..`
`22:21.07`	`drray`	`if you don't know the difference between sccp and sip you don't need sccp`
`22:21.33`	`DrPete`	`lol`
`22:21.43`	`Qwell[]`	`(or sip)`
`22:21.53`	`drray`	`:)`
`22:22.13`	`killfill`	`when in normal opration, everything works ok. but some times, i see asterisk processes poping up. when the popup proc's they eat the cpu. when i kill the popups, the cpu is ok, and the original asterisk process keeps working ok.`
`22:22.22`	`killfill`	`somehow, asterisk is forking itself..`
`22:22.28`	`killfill`	`in what conditions would it do this?..`
`22:23.27`	`syle`	`asterisk doesn;t fork() it uses pthreads`
`22:23.57`	`killfill`	`wired.. im executing it as "asterisk".. i.e. no safe_asterisk.`
`22:23.59`	`FuriousGeorge`	`does anyone know if there is anyway to interface something like a telephone handset with a soundcard`
`22:24.05`	`FuriousGeorge`	`not as a mic but as a spearker`
`22:24.08`	`killfill`	`who could be doing this?`
`22:25.09`	`[TK]D-Fender`	`revslowmo : No clue how to detect that. 1 option, put a privacy filter on it (disconnects the line when another is in use)`
`22:26.09`	`*** join/#asterisk lately (n=doug@ppp167-252-31.static.internode.on.net)`
`22:27.10`	`*** join/#asterisk demigod2k (n=joey@cpe-24-210-97-162.twmi.res.rr.com)`
`22:27.11`	`demigod2k`	`hi`
`22:27.27`	`*** join/#asterisk junglicious (n=junglici@user-24-214-39-200.knology.net)`
`22:30.03`	`batphone`	`http://bugs.digium.com/view.php?id=7181`
`22:30.33`	`Sedorox`	`Ahaha.. sweet.. I'm looking at jobs in my area.. one if for a linux systems specialist.. and they list experience with asterisk as a big plus :p`
`22:31.08`	`batphone`	`Sedorox: where are you from?`
`22:31.18`	`Sedorox`	`philadelphia aresa`
`22:31.21`	`Sedorox`	`-s`
`22:31.43`	`Sedorox`	`I don't have a job`
`22:31.46`	`Sedorox`	`hence why I'm looking`
`22:31.47`	`Sedorox`	`lol`
`22:31.55`	`batphone`	`yall like my bug`
`22:31.59`	`batphone`	`how to crash any asterisk server`
`22:32.02`	`Sedorox`	`ahaha`
`22:32.04`	`killfill`	`syle: any idea why i see this?`
`22:33.14`	`dlynes_office`	`bugz: actually....I've run into something similar`
`22:33.30`	`dlynes_office`	`bugz: but it gave up after my pri got about 1/2 full`
`22:33.40`	`dlynes_office`	`bugz: adn then just hung up all calls`
`22:34.01`	`bugz`	`dlynes_office: youd be s.o.l. with a sip connect`
`22:34.21`	`dlynes_office`	`bugz: Set up an incoming pri extension to call out to a cellphone`
`22:34.45`	`bugz`	`ok`
`22:34.45`	`dlynes_office`	`bugz: have the cellphone set to call into the pri extension when the call is busy or not taking calls`
`22:34.58`	`bugz`	`haha.. ok`
`22:35.05`	`dlynes_office`	`bugz: i.e. set the voicemail number to the pri extension`
`22:36.44`	`bugz`	`yuck`
`22:37.15`	`bugz`	`i wonder how quickly a server would explode if i set all the phones to fwd to the next phone over`
`22:37.19`	`bugz`	`to make a circle`
`22:37.19`	`bugz`	`lol..`
`22:37.24`	`dlynes_office`	`bugz: I had a couple of extensions set up like that for cell phone customers until I realized what was happening`
`22:37.30`	`ozverenm`	`I have big big problems with one HFC card configured as NT mode`
`22:37.37`	`dlynes_office`	`bugz: I had to do some pretty quick work to compensate for that`
`22:37.43`	`ozverenm`	`sometimes I cannot call with asterisk`
`22:37.57`	`dlynes_office`	`bugz: I assumed when the cell phone call forwarded to voicemail that it would call forward as the cell phone number`
`22:38.10`	`ozverenm`	`When I activate debug, I don't see any Q921 messages ..`
`22:38.19`	`ozverenm`	`what can be the problem ?`
`22:38.23`	`dlynes_office`	`ozverenm: q.931?`
`22:38.31`	`ozverenm`	`yes too`
`22:38.34`	`dlynes_office`	`pri debug`
`22:38.39`	`dlynes_office`	`pri intense debug`
`22:39.00`	`ozverenm`	`this command show nothing ...`
`22:39.14`	`dlynes_office`	`hfc is a pri card, right?`
`22:39.18`	`ozverenm`	`some problems knowed for HFC cards ?`
`22:39.19`	`ozverenm`	`yes`
`22:39.31`	`dlynes_office`	`ozverenm: yeah...it works just fine for me on a digium card`
`22:39.49`	`dlynes_office`	`ozverenm: on the 4 port t1 card that is`
`22:40.00`	`ozverenm`	`But I see that some problems about HFC and IRQ on Linux`
`22:40.14`	`dlynes_office`	`yeah...problems with digium cards and irqs yeah`
`22:40.17`	`dlynes_office`	`pain in the ass, really`
`22:40.30`	`ozverenm`	`what I can do ?`
`22:40.31`	`dlynes_office`	`digium cards should play nice with irq sharing like every other card out there`
`22:40.42`	`[TK]D-Fender`	`HFC = BRI`
`22:40.48`	`dlynes_office`	`[TK]D-Fender: ah`
`22:40.58`	`dlynes_office`	`[TK]D-Fender: well, i asked him if it was a pri card, and he said yes :0`
`22:41.05`	`ozverenm`	`its not a HFC, its a junghanns cards`
`22:41.09`	`ozverenm`	`double E1`
`22:41.26`	`ozverenm`	`but the chipset its a HFC chipset ( Cologne Chipset(r))`
`22:43.23`	`*** join/#asterisk Thock (n=thock@216.119.93.253)`
`22:46.26`	`enkrypted`	`I set externip, localnet, and nat=yes but I have the same problem..`
`22:48.14`	`*** join/#asterisk tzafrir_laptop (n=tzafrir@bzq-88-154-12-25.red.bezeqint.net)`
`22:50.49`	`[TK]D-Fender`	`enkrypted : What ports did you forward to you * box?`
`22:53.10`	`enkrypted`	`5060,20k-25k`
`22:53.21`	`Qwell[]`	`enkrypted: Did you change rtp.conf?`
`22:53.24`	`Qwell[]`	`to use 20k-25k`
`22:53.27`	`enkrypted`	`yes`
`22:53.58`	`enkrypted`	`The * is on 192.168.1.100 and I am on 192.168.1.105 directly connected.`
`22:54.16`	`enkrypted`	`Other user is outside network thru NAT`
`22:54.19`	`xp_prg`	`ok here is my question, why would I use agi instead of system in my extensions.conf to execute a perl script?`
`22:54.31`	`*** join/#asterisk chaoscon (n=ph33r@smartserv/ceo/chaoscon)`
`22:54.38`	`Qwell[]`	`xp_prg: If it's an AGI`
`22:54.58`	`xp_prg`	`still dont' understand the difference`
`22:55.02`	`xp_prg`	`can you explain more?`
`22:55.08`	`dlynes_office`	`Echo is caused by the remote end, right?`
`22:55.13`	`[TK]D-Fender`	`enkrypted : you should be forwarding 10000-20000`
`22:55.21`	`dlynes_office`	`i.e. if i hear echo, it's caused by the person calling me?`
`22:55.23`	`SkramX`	`is cepstral anygood?`
`22:55.29`	`enkrypted`	`I thought it was arbitrary?`
`22:55.30`	`*** join/#asterisk praet (n=praet@wsip-68-15-32-50.ri.ri.cox.net)`
`22:55.39`	`SkramX`	`Im thinking about purchasing, or hiring someone to do voice recordings..`
`22:55.42`	`Qwell[]`	`SkramX: it's workable`
`22:55.50`	`xp_prg`	`what makes a perl script regular and what makes a perl script an agi script?`
`22:55.51`	`[TK]D-Fender`	`dlynes_home : Its hear due to the end that terminates the call`
`22:56.02`	`enkrypted`	`Defaults are rtpstart=5000 and rtpend=31000`
`22:56.06`	`dlynes_office`	`[TK]D-Fender: ah...so if i hear echo, it's caused by my end then?`
`22:56.08`	`SkramX`	`Qwell[]: okay.`
`22:56.15`	`tainted_`	`what causes pockets of dead air even when people are speaking`
`22:56.18`	`SkramX`	`any other like- applications which are better?`
`22:56.18`	`[TK]D-Fender`	`dlynes_home : Depends what your end does`
`22:56.19`	`xp_prg`	`brb`
`22:56.25`	`tainted_`	`network issues or analog issues?`
`22:57.00`	`enkrypted`	`Attempting native bridge of SIP/...`
`22:57.25`	`*** part/#asterisk terrapen (n=cjs@166.70.183.108)`
`22:57.28`	`*** join/#asterisk terrapen (n=cjs@166.70.183.108)`
`22:57.30`	`*** part/#asterisk terrapen (n=cjs@166.70.183.108)`
`22:57.32`	`enkrypted`	`Got RTP packet from 192.168.1.105:49198 (type 0, seq 989, ts 0, len 160)`
`22:57.33`	`enkrypted`	`Sent RTP packet to ...:49164 (type 0, seq 27153, ts 0, len 160)`
`22:57.46`	`dlynes_office`	`[TK]D-Fender: my end is not getting any echo at all...when I call local calls analog to pri, the remote end doesn't get echo, 50% of the calls locally going from analog to pri to SIP, get slight echo at the start of a call; long distance calls going analog to pri to SIP to 416 NPA are getting really bad echo`
`22:57.47`	`enkrypted`	`Its using 49k?`
`22:57.53`	`ozverenm`	`If I configure a card as NT mode, and connect directly my card to my PBX, I must add resistances in extremity ?`
`22:57.56`	`dlynes_office`	`[TK]D-Fender: the echo is always on the remote end, not on my end`
`22:58.46`	`dlynes_office`	`[TK]D-Fender: on my end for all calls, there's no echo at all`
`23:00.21`	`camelon`	`in wich part of the tecnologies devices I muste use pri_net signalling?`
`23:01.06`	`generalhan`	`Qwell[]: you still here ?`
`23:01.10`	`Qwell[]`	`nope`
`23:01.19`	`generalhan`	`lol`
`23:01.24`	`generalhan`	`so i got it to work finally`
`23:01.31`	`Qwell[]`	`what was it?`
`23:01.32`	`generalhan`	`i dont know why ... but i know how !`
`23:01.38`	`generalhan`	`i disabled selinux`
`23:01.41`	`[TK]D-Fender`	`dlynes_home : hmmm`
`23:01.42`	`Qwell[]`	`well...duh`
`23:01.48`	`generalhan`	`and now it works perfectly ~hahahahaha`
`23:02.52`	`CunningPike`	`dlynes_office: What handset are you using?`
`23:02.56`	`generalhan`	`so now i just need to figure out how to get it to work after i turn it back on ... causei really dont want to leave it disabled`
`23:03.12`	`dlynes_office`	`CunningPike: Nortel Meridian handset hooked up to a Nortel CICS system`
`23:03.27`	`CunningPike`	`And the other end is getting echo?`
`23:03.31`	`dlynes_office`	`CunningPike: correct`
`23:03.37`	`SkramX`	`im thinking about purchasing Cepstral (probably david)`
`23:03.47`	`CunningPike`	`dlynes_office: Sorry to make you repeat this, but what's the path?`
`23:03.51`	`Qwell[]`	`I wasn't very impressed with cepstral, over festival`
`23:04.44`	`dlynes_office`	`CunningPike: Meridian handset -> CICS -> pure analog line (no voip, no asterisk) -> pstn -> pri -> asterisk -> pri/SIP`
`23:05.01`	`CunningPike`	`And which end is getting echo?`
`23:05.25`	`CunningPike`	`Meridian or SIP`
`23:05.42`	`dlynes_office`	`Only the SIP end (local connections to sip get slight echo only at the start of the conversation), long distance SIP (416 NPA) gets really bad echo`
`23:05.55`	`CunningPike`	`camelon: pri_net is a setting in zapata.conf for setting up PRI spans`
`23:05.58`	`dlynes_office`	`I hear zero echo on the meridian end`
`23:06.18`	`dlynes_office`	`CunningPike: I also get the same problem if I call from a fido cell phone (no echo on fido end; only remote end)`
`23:06.27`	`CunningPike`	`dlynes_office: OK - what EC are you using?`
`23:06.54`	`dlynes_office`	`CunningPike: good question, but i'm guessing you're thinking the pri is suspect?`
`23:07.05`	`dlynes_office`	`CunningPike: i think it's mg2, anyways`
`23:08.33`	`xp_prg`	`I just created my_new_sound.ulaw using text2wave, will PlayBack play this?`
`23:08.38`	`CunningPike`	`dlynes_office: I'm thinking that your EC isn't able to suppress the echo that you're getting from the PSTN. If you have tried MG2, echotraining, and dicked around with gain until you're blue in the face, and ruled out interrupt issues, you're basically screwed. We went out and bought a Ditech - no echo`
`23:08.44`	`xp_prg`	`if I put it in /var/lib/asterisk/sounds ?`
`23:08.53`	`[TK]D-Fender`	`Norhell!`
`23:09.11`	`CunningPike`	`xp_prg: It should do.....`
`23:09.15`	`xp_prg`	`ok`
`23:09.22`	`CunningPike`	`xp_prg: Try it!`
`23:09.34`	`dlynes_office`	`CunningPike: i haven't done squat with gains on the pri yet, because i thought gains were only for fxo/fxs`
`23:10.14`	`xp_prg`	`if it doesn't work will it freeze up the server do you think?`
`23:10.20`	`CunningPike`	`dlynes_office: No, they are important for PRIs, too. The idea is to get them as low as possible, while still sounding 'normal' to the user`
`23:10.36`	`CunningPike`	`xp_prg: No - it will simply send an error to the CLI and carry on`
`23:10.38`	`dlynes_office`	`CunningPike: well, and it looks like echo cancellation is turned off :)`
`23:10.50`	`xp_prg`	`it worked!`
`23:10.55`	`CunningPike`	`dlynes_office: How do you know?`
`23:10.59`	`[TK]D-Fender`	`dlynes_home : Welcome to the wonderful world of Zaptel software Echo Cancellation!`
`23:10.59`	`CunningPike`	`xp_prg: Great!`
`23:11.06`	`dlynes_office`	`CunningPike: zap show channel 1`
`23:11.08`	`CunningPike`	`[TK]D-Fender: Isn't it great`
`23:11.18`	`SkramX`	`Im a little confused with Cepstral. A voice costs $29.99, but do I need an ADL license if just using it on a PBX, but not selling the voice?`
`23:11.22`	`dlynes_office`	`CunningPike: and cat /etc/asterisk/zapata.conf :)`
`23:11.23`	`[TK]D-Fender`	`CunningPike : Its been long enough I almost forget ;)`
`23:11.25`	`CunningPike`	`dlynes_office: While the channel was active?`
`23:11.29`	`dlynes_office`	`CunningPike: yeah`
`23:11.32`	`dlynes_office`	`CunningPike: erm no`
`23:11.34`	`SkramX`	`An Audio Distribution License (ADL) provides rights to publish audio created using a Cepstral voice. This includes the rights to distribute audio files containing Cepstral voice output via email, web site, telephone, audio CD, Flash Animation, or any other media, physical or electronic.`
`23:11.46`	`SkramX`	`<PROTECTED>`
`23:11.51`	`CunningPike`	`dlynes_office: OK - it will always show 'OFF' unless the channel is actually being used`
`23:11.52`	`dlynes_office`	`CunningPike: i forgot i had turned it off a while back to test faxing`
`23:12.03`	`CunningPike`	`dlynes_office: Oh - well, that'll do it then :)`
`23:12.04`	`dlynes_office`	`CunningPike: and forgot to turn it back on after i was finished testing`
`23:12.23`	`blitzrage`	`zwelch: you around?`
`23:12.25`	`CunningPike`	`dlynes_office: Maybe try turning echo can on and see if that solves you echo problem ;)`
`23:12.31`	`dlynes_office`	`lol`
`23:12.43`	`blitzrage`	`anyone here use minisip on windows?`
`23:12.45`	`Quension`	`xp_prg AGI is a specific interface/protocol .. the script is specifically designed to get and send data between itself and asterisk using that protocol`
`23:12.55`	`Quension`	`if you've ever worked with webservers, same concept as CGI`
`23:13.02`	`CunningPike`	`dlynes_office: But we had echo to some numbers that we couldn't solve with asterisk or the Digium VPM`
`23:13.09`	`CunningPike`	`We got an external EC box`
`23:13.13`	`CunningPike`	`Zero ehco`
`23:13.27`	`xp_prg`	`Quension ok, I think I get what your saying`
`23:13.40`	`dlynes_office`	`CunningPike: yeah, we're going to be buying two sangoma single port pri cards shortly both with echo cancellers`
`23:13.41`	`xp_prg`	`it sends in shell variables and you modify shell variables etc...`
`23:13.45`	`*** join/#asterisk subdolus (n=subby@subby.afraid.org)`
`23:14.08`	`camelon`	`<Cunning Pike> now the first spans are pri_cpe . . . my question: must i signalling the outgoing spans with pri_net or fxoks?`
`23:14.12`	`Quension`	`yeah`
`23:14.14`	`dlynes_office`	`CunningPike: they're pretty nice...i don't have to depend on a specific box then`
`23:14.18`	`CunningPike`	`dlynes_office: I'd be really interested to hear how you make out with them`
`23:14.25`	`dlynes_office`	`CunningPike: pain in the ass digium card only works on a specific voltage bus`
`23:14.45`	`dlynes_office`	`CunningPike: i've got one machine with pci-x that happens to run on that voltage`
`23:14.46`	`justinu\|laptop`	`sangoma is good`
`23:14.58`	`dlynes_office`	`CunningPike: all my other machines are using some other voltage`
`23:15.04`	`CunningPike`	`dlynes_office: I think they have two versions - one does both (I think - I may be wrong) and one only does one`
`23:15.05`	`CunningPike`	`Or somethong`
`23:15.21`	`dlynes_office`	`CunningPike: yeah...we got stuck with the one that only does the weird one`
`23:15.35`	`CunningPike`	`camelon: It depends on the PRI - one end needs to be pri_cpe and the other needs to be pri_net`
`23:17.26`	`CunningPike`	`camelon: You're end needs to be what the other end isn't`
`23:17.40`	`CunningPike`	`camelon: So talk to your provider`
`23:18.13`	`*** join/#asterisk JohnJacob (n=m00p@pool-71-127-110-89.aubnin.fios.verizon.net)`
`23:18.26`	`xp_prg`	`where does my perl agi script go on asterisk server, what directory?`
`23:19.11`	`xp_prg`	`oh wait I found it`
`23:19.14`	`*** join/#asterisk anthm (n=anthmct@CPE-69-76-83-52.wi.res.rr.com)`
`23:19.14`	`*** mode/#asterisk [+o anthm] by ChanServ`
`23:19.19`	`xp_prg`	`/var/lib/asterisk/agi-bin`
`23:19.28`	`blitzrage`	`~seen zwelch`
`23:19.31`	`jbot`	`zwelch is currently on #asterisk (7d 1h 47m 5s) #oe (7d 1h 47m 5s). Has said a total of 144 messages. Is idling for 16h 36m 48s, last said: 'heh'.`
`23:19.38`	`camelon`	`<cunningPike> I have pri_cpe in the incomming channels . . .and the outgoing signaling with fxoks . . .but havin lot of calling drops . . .�must I change the signaling of the outgoing channel with pri_net . . .? or wich part of the zapata config I must use pri_net?`
`23:20.12`	`CunningPike`	`camelon: Are you using a PRI?`
`23:20.25`	`camelon`	`yeeeeeeppp . . .isdn PRI`
`23:22.18`	`camelon`	`<CunningPike> . . .2E1s (PRI) . . . * . . . 2CBs . . .POTS . . .2ATAs`
`23:22.24`	`zwelch`	`blitzrage: yo`
`23:22.26`	`justinu\|laptop`	`when you say outgoing signalling, you're talking about outgoing calls on the PRI, or what?`
`23:22.40`	`zwelch`	`blitzrage: pop into #minisip :)`
`23:23.34`	`camelon`	`justinu . . yes . . . the people from inside calling thorough PSTN`
`23:23.55`	`justinu\|laptop`	`ok, so why would you have fxo_ks signalling on a PRI? that makes no sense`
`23:24.30`	`*** join/#asterisk tdonahue-laptop (n=tdonahue@seymour-cuda1-24-49-168-129.albyny.adelphia.net)`
`23:26.45`	`camelon`	`Justinu . . .the first 20 channel from the PRI are signaled like pri_cpe . . .the 10 channel for outgoing call are signalesd fxo_ks`
`23:29.35`	`camelon`	`justinu . . my question is . . .if in some part of the config i used pri_cpe signaling . . i have to use pri_net signalling in the outgoing channels?`
`23:30.05`	`justinu\|laptop`	`no`
`23:31.01`	`camelon`	`OK . . . then why you said that makes no sense in a PRI?`
`23:31.29`	`justinu\|laptop`	`because you don't often see both CCS and CAS on the same T1/E1`
`23:33.04`	`*** join/#asterisk netcrash (n=andre@82.102.32.22)`
`23:34.09`	`*** join/#asterisk supjigatr (n=syslod@152.53.16.10)`
`23:34.13`	`netcrash`	`hello , can different protocols interact throught a asterisk server ? The server does the translation between the both protocols in this case ... iax - mgcp ...`
`23:34.22`	`supjigatr`	`Yep.`
`23:34.41`	`camelon`	`justinu . . .but my 2E1s only framed with ccs+crc4 (just one)`
`23:35.05`	`supjigatr`	`Anyone tell me on a sangoma a104d which is port 1?`
`23:35.06`	`camelon`	`the second without crc4 . . only ccs`
`23:35.17`	`supjigatr`	`Is it 1-4 from card edge or card top?`
`23:35.41`	`justinu\|laptop`	`camelon: both E1s go to telco?`
`23:36.02`	`*** join/#asterisk RoyK (n=roy@10.80-203-106.nextgentel.com)`
`23:36.32`	`*** join/#asterisk mishehu (i=mishehu@cshells.shavedgoats.net)`
`23:37.13`	`camelon`	`justinu . . .yeeeppp`
`23:37.52`	`justinu\|laptop`	`and you're saying both E1s are PRI, but some channels on each of those E1s use fxo_ks signalling?`
`23:40.11`	`bkw_`	`riddle me this`
`23:40.14`	`supjigatr`	`Anyone seen this on sangoma? af_wanpipe: Unknown symbol dev_ioctl`
`23:40.26`	`bkw_`	`supjigatr, what wanpipe you installing?`
`23:40.53`	`bkw_`	`ftp.sangoma.com:/linux/custom/2.3.4/wanpipe-beta5-pre5-2.3.4.tgz is what I recommend`
`23:41.38`	`bkw_`	`supjigatr, wanrouter status is helpful also`
`23:41.56`	`supjigatr`	`says they are active.`
`23:42.02`	`bkw_`	`connected or connecting?`
`23:42.12`	`camelon`	`justinu . . .noopp . . . all are signalesd pri_cpe . . .my question .. . must I signal the outgoing channels like pri_net?`
`23:42.31`	`bkw_`	`camelon, depends on if you want to be net or cpe`
`23:42.35`	`supjigatr`	`connected`
`23:42.41`	`supjigatr`	`but asterisk can't find zap`
`23:42.53`	`bkw_`	`supjigatr, well if I had time I could help you`
`23:42.59`	`bkw_`	`I would need to ssh in and configure it`
`23:43.06`	`bkw_`	`but try the 2.3.4 beta5`
`23:43.13`	`supjigatr`	`Thanks. I'll try the newer one.`
`23:44.13`	`justinu\|laptop`	`camelon: ok, the answer is no... pri_net is only if you want to emulate the telco side`
`23:44.27`	`camelon`	`bkw_: when I must be cpe (incomming traffic?) and when i must be net (outgoing traffic?)`
`23:45.11`	`camelon`	`bkw_:is my assumption incorrect?`
`23:45.42`	`camelon`	`justinu . . get it!`
`23:49.21`	`netcrash`	`supjigatr: Thankl you`
`23:49.27`	`netcrash`	`*Thank You`
`23:49.31`	`netcrash`	`Good night`
`23:52.11`	`camelon`	`bkw_: could you give me some help?`
`23:53.44`	`*** join/#asterisk Johnnie (n=jdlewis@pdpc/supporter/active/Johnnie)`
`23:56.03`	`xp_prg`	`anyone know why this perl script line doesn't work: $AGI->stream_file("/var/lib/asterisk/sounds/my_new_sound.ulaw");`
`23:56.27`	`*** join/#asterisk MRH2 (n=Mr_happy@fcirc-adsl.demon.co.uk)`
`23:56.43`	`xp_prg`	`if do exten => 660,1,Playback(my_new_sound) it works fine`
`23:56.51`	`xp_prg`	`I am just trying to duplicate the same with a perl agi script`
`23:56.55`	`MRH2`	`hi anyone disassembled a polycom phone?`
`23:57.07`	`rpm`	`xp_prg: take the extension off.`
`23:57.14`	`xp_prg`	`ok`
`23:57.31`	`Ahrimanes`	`stream_file(my_new_sound) should work, no?`
`23:58.01`	`xp_prg`	`rpm I hear nothing`
`23:58.18`	`xp_prg`	`I know my extensions.conf is right`
`23:58.34`	`rpm`	`what happens when you debug the agi script?`
`23:58.36`	`rpm`	`agi debug`
`23:59.02`	`xp_prg`	`how do I debug it, this is my first agi script, do I put agi debug on the unix prompt?`
`23:59.19`	`rpm`	`in the asterisk console you can type 'agi debug'`
`23:59.25`	`rpm`	`make your call and watch your script run`
`23:59.39`	`xp_prg`	`ok doinf it`

Generated by irclog2html.pl by Jeff Waugh - find it at freshmeat.net! Modified by Tim Riker to work with blootbot logs, split per channel, etc.