irclog2html for #asterisk on 20060613

`00:00.10`	`Bert-`	`:)`
`00:00.12`	`shmaltz`	`dlynes_home, the interesting part is I have it running fine on some machines`
`00:00.14`	`dlynes_home`	`shmaltz: ls -l /etc/rc.d/rc.udev`
`00:00.26`	`dlynes_home`	`shmaltz: what bits do you see set on taht file?`
`00:00.34`	`shmaltz`	`-rwxrwxrwx 1 root root 1396 2006-01-25 10:04 /etc/rc.d/rc.udev*`
`00:00.43`	`shmaltz`	`I think thats 777`
`00:01.01`	`dlynes_home`	`shmaltz: yeah...you must've changed the default permissions, or slamd really sucks`
`00:01.33`	`shmaltz`	`dlynes_home I did change it, because it didn't have x permissions so I just did chmod 777 /etc/rc.d/rc.udev`
`00:01.36`	`shmaltz`	`what should it be?`
`00:01.50`	`CunningPike`	`wikkid: Sorry - missed your question - just saw it now on scrollback`
`00:01.53`	`dlynes_home`	`shmaltz: if anything, 755, or 700`
`00:02.09`	`dlynes_home`	`shmaltz: it should not be world writable`
`00:02.12`	`CunningPike`	`wikkid: If all your phones are IP based, you can do exactly what you say - that's the beauty of it!`
`00:02.32`	`wikkid`	`frakin sweet!`
`00:02.34`	`shmaltz`	`dlynes_home, but that wont do any harm`
`00:02.37`	`wikkid`	`thanks cunningpike`
`00:02.47`	`P-NuT`	`does anyone have DETAILED zaptel.conf config for x100p in australia with tx/rx gain and the full box and dice?`
`00:02.49`	`CunningPike`	`wikkid: No problem - good luck! :D`
`00:03.02`	`dlynes_home`	`shmaltz: it will if someone breaks into your box`
`00:03.17`	`shmaltz`	`dlynes_home, :) please back to the problem`
`00:04.09`	`*** join/#asterisk Snake-Eyes (n=blog@203.220.55.70)`
`00:04.32`	`dlynes_home`	`shmaltz: well, if you want to fix it for the short term, you can do chmod 700 /etc/rc.d/rc.hotplug`
`00:04.35`	`hads`	`P-NuT: tx/rx gain settings depend on your line, so someone elses aren't going to help a lot.`
`00:04.40`	`shmaltz`	`dlynes_home, found the problem looks like rc.S wasn't starting it`
`00:04.50`	`shmaltz`	`started it manualy and viola, works nicely`
`00:05.00`	`hads`	`P-NuT: Also, you will most likely have echo with an X100 no matter what.`
`00:05.11`	`P-NuT`	`hads: how aren't they? They're all telstra lines.`
`00:06.07`	`*** join/#asterisk coppice (n=chatzill@44.199.17.210.dyn.pacific.net.hk)`
`00:06.10`	`hads`	`P-NuT: Yes, and they are all different length lines from different exchanges which gives them all different characteristics.`
`00:07.21`	`dlynes_home`	`shmaltz: yeah...just looked at the script`
`00:07.29`	`shmaltz`	`and?`
`00:07.30`	`dlynes_home`	`shmaltz: i guess udev does need hotplug under slackware`
`00:07.41`	`*** join/#asterisk SwK (n=Silik0nJ@12-219-147-107.client.mchsi.com)`
`00:07.55`	`shmaltz`	`dlynes_home, I have hotplug already but still no go automaticaly wiil have to hack that out :P`
`00:08.19`	`dlynes_home`	`shmaltz: you need to change rc.M so that rc.udev is loaded automatically if it has execution bits set`
`00:08.58`	`dlynes_home`	`shmaltz: nvm....rc.S is autoexecuting it`
`00:09.09`	`dlynes_home`	`shmaltz: so just make sure rc.udev has its execution bits set`
`00:09.31`	`shmaltz`	`dlynes_home if it's 777 then it does`
`00:12.47`	`dlynes_home`	`CunningPike: oh yeah...did I mention? [TK]D-Fender and a sangoma tech helped me get one of those cards up and running`
`00:13.20`	`CunningPike`	`dlynes_home: Great! How is it?`
`00:13.26`	`dlynes_home`	`CunningPike: works like a charm`
`00:13.28`	`Sponge_bob`	`has anyone tried to successfull compile the webmeetme?`
`00:13.35`	`CunningPike`	`dlynes_home: Great!`
`00:13.45`	`dlynes_home`	`CunningPike: the installer is very picky about which options you choose though, as I found out the hard way`
`00:14.02`	`dlynes_home`	`CunningPike: i need to get it running on 2.6 yet though`
`00:15.01`	`*** join/#asterisk torkii (n=eballest@213-145-185-94.dd.nextgentel.com)`
`00:15.06`	`CunningPike`	`dlynes_home: OK - gotta run. Home time!`
`00:15.22`	`denon`	`hmm, am I missing something? cant you change a 7960's IP from telnet?`
`00:15.22`	`Nugget`	`telnet is eeeeeeevil!`
`00:15.30`	`dlynes_home`	`CunningPike: later`
`00:15.42`	`denon`	`(they have no dhcp on that network)`
`00:16.10`	`dlynes_home`	`denon: can't you change it through the local keypad, http, or provisioning?`
`00:16.39`	`*** join/#asterisk mog (i=ejabberd@68.62.237.103)`
`00:16.42`	`dlynes_home`	`denon: or load a dhcp server on the asterisk box for that matter?`
`00:17.32`	`denon`	`nah, its just temporary`
`00:17.38`	`denon`	`we want to toss it directly on the dsl, which has no dhcp`
`00:17.46`	`denon`	`asterisk is 10,000 miles away :)`
`00:17.56`	`denon`	`I'll just feed it to it via tftp on another network I guess`
`00:20.47`	`[TK]D-Fender`	`Did I just hear my name? :)`
`00:21.59`	`[TK]D-Fender`	`dlynes_home : So after your recompile all is good?`
`00:22.09`	`[TK]D-Fender`	`dlynes_home : Running ont eh kernel you wanted as well?`
`00:22.56`	`*** join/#asterisk BZBW (i=BZBW@ip67-153-142-109.z142-153-67.customer.algx.net)`
`00:23.21`	`BZBW`	`hi anyone knows if 1.2.9.1 support SIMPLE?`
`00:23.21`	`jhiver`	`aaah why oh why`
`00:23.36`	`file`	`BZBW: no it doesn't`
`00:23.59`	`BZBW`	`I just want to test if my SNOM/Polycom support IM or not:)`
`00:24.01`	`jhiver`	`I still don't know _why_ asterisk's cdr_odbc stopped recording CDRs in the cdr database while saying "cdr_odbc: query successful" on the CLI`
`00:24.20`	`jhiver`	`it's very frustrating`
`00:24.37`	`BZBW`	`what about about the latest CVS branch for SIMPLE?`
`00:24.41`	`jhiver`	`you have something that works, then it stops, and there's no error message either!`
`00:25.14`	`file`	`BZBW: we don't have text messaging really...`
`00:25.23`	`file`	`we have it in dialog, but that's it - and I have yet to find a phone that does it`
`00:25.25`	`jhiver`	`anybody ran into that before by any chance?`
`00:26.19`	`[TK]D-Fender`	`file : Polycom's all support SIP IM's.`
`00:26.20`	`BZBW`	`emm, strange, I knew during VON show last year someone from * devel mentioned about supporting SIMPLE.`
`00:26.41`	`BZBW`	`Yes Polycom does that already:)`
`00:26.46`	`jhiver`	`Well, I guess that's a NO :)`
`00:27.02`	`file`	`BZBW: that was probably me, as I was working at one of the terminals putting together a proof of concept patch`
`00:27.09`	`*** join/#asterisk {Sean} (n=sean@c-67-177-80-24.hsd1.mi.comcast.net)`
`00:27.10`	`{Sean}`	`aye`
`00:27.22`	`file`	`[TK]D-Fender: not how we support it right now...`
`00:27.22`	`{Sean}`	`i have a new * install (although not an * newbie)`
`00:27.28`	`jhiver`	`I think I'm gonna need to work around by writing the CDRs into a file using cdr_csv and then inserting them in the db every 5 minutes or so`
`00:27.34`	`{Sean}`	`for some reason nmap is showing that 5060 is open but filtered`
`00:27.40`	`jhiver`	`is there a way to rotate the CDR log files safely?`
`00:27.44`	`{Sean}`	`and i have no firewalling or iptables rules enabled`
`00:27.53`	`BZBW`	`file: so are u saying we will never support SIMPLE?`
`00:27.54`	`jhiver`	`wouldn't want to do a move in the middle of a write...`
`00:28.04`	`file`	`BZBW: no, I said we don't currently support it`
`00:28.28`	`dlynes_home`	`not yet]`
`00:28.38`	`{Sean}`	`anybody have any ideas?`
`00:29.19`	`BZBW`	`file: u know the plan when we will? Cauz we are trying to put together a system to demo these advance features to a potential client:)`
`00:29.34`	`jhiver`	`{Sean}, maybe something to do with the router in front of that box of yours?`
`00:29.36`	`file`	`BZBW: no, right now we're working on getting 1.4 out there - not new features or core changes`
`00:29.49`	`jhiver`	`or maybe your ISP is an ass and you should try to change the SIP port`
`00:30.02`	`{Sean}`	`jhiver: its not the router, its a wide open colo'ed server with no filtering of any type enabled`
`00:30.15`	`jhiver`	`{Sean}, then I really don't know :(`
`00:30.21`	`{Sean}`	`yeah its a shitter :/`
`00:30.29`	`BZBW`	`file: u know any other SIP proxy support it? Other than SER(I'm not sure if it is complete:().`
`00:30.34`	`jhiver`	`tell me about it, I've got weird issues of my own :(`
`00:31.03`	`file`	`BZBW: SER as a SIP proxy is complete... what's not complete about it?`
`00:31.30`	`BZBW`	`it claim support Jabbar and SIMPLE.`
`00:31.55`	`file`	`it's easy to support SIMPLE in it, because all it's doing is routing the message`
`00:32.06`	`jhiver`	`so c'mon guys... no way to safely rotate the Master.csv log?`
`00:32.32`	`jhiver`	`I guess if I enable the CDR buffer it will make it less likely to run into this kind of trouble...`
`00:32.55`	`*** join/#asterisk wolfson (i=wolfson@65.167.193.3)`
`00:32.59`	`BZBW`	`file: yes, that's why I'm supprised that it is not there yet:(`
`00:33.20`	`file`	`BZBW: where? in Asterisk?`
`00:33.50`	`BZBW`	`file: Yes, I thought SIMPLE is easy to implement in *:)`
`00:33.55`	`file`	`no`
`00:33.56`	`file`	`it's not`
`00:34.35`	`denon`	`huh, this is odd`
`00:34.36`	`[TK]D-Fender`	`See!?!?! SIMPLE=hard! News at 11!`
`00:34.47`	`denon`	`why wouldnt a 7960 take a static assignment from a tftp?`
`00:34.49`	`coppice`	`don't you realise names are designed to divert attention, and not to illuminate. the very name SIMPLE tells you it isn't`
`00:34.52`	`denon`	`it seems to pull the configs`
`00:35.20`	`coppice`	`like open systems are only open when you remove the cover`
`00:36.00`	`BZBW`	`file:k, looks like I'll have to wait then:(`
`00:37.07`	`Qwell[]`	`BZBW: Or hire somebody to write it for you`
`00:38.48`	`BZBW`	`Quell: Good idea, we will see whether the boss will agree on this:((`
`00:39.04`	`jhiver`	`well, fucking _duh_, I just understood what was wrong`
`00:39.11`	`*** join/#asterisk Poincare (n=jefffnod@amp89.ampersant.be)`
`00:39.37`	`jhiver`	`it was registering the records just fine, except on UTC time when I'm GMT+4`
`00:39.50`	`jhiver`	`so I was like "why is there no record for today"`
`00:39.53`	`jhiver`	`laaaame`
`00:40.51`	`jhiver`	`sorry 'bout the moaning lads`
`00:41.57`	`*** join/#asterisk RoyK (n=roy@122.80-203-78.nextgentel.com)`
`00:43.16`	`jhiver`	`gotta go to bed I guess... :)`
`00:43.27`	`jhiver`	`cya all`
`00:44.38`	`*** join/#asterisk trelane (i=trelane@66.93.203.199)`
`00:46.06`	`dlynes_home`	`[TK]D-Fender: yeah...after the recompile, everything is fine`
`00:46.11`	`dlynes_home`	`[TK]D-Fender: but not running on 2.6 yet`
`00:46.49`	`dlynes_home`	`[TK]D-Fender: picked up a book on writing Linux device drivers today though, so I can understand how these damned things work`
`00:47.03`	`dlynes_home`	`[TK]D-Fender: i've written MS-DOS and OS/2 drivers before...just never Linux drivers`
`00:47.50`	`*** part/#asterisk wikkid (n=Chris@63.228.225.137)`
`00:48.31`	`dlynes_home`	`[TK]D-Fender: heh...speaking of...the sangoma tech just logged on :)`
`00:49.48`	`[TK]D-Fender`	`:)`
`00:50.07`	`*** join/#asterisk justinu (n=Justin@dsl081-083-093.lax1.dsl.speakeasy.net)`
`00:50.12`	`justdave`	`is this a good channel to ask questions about freepbx, or do they have their own channel?`
`00:50.14`	`dlynes_home`	`[TK]D-Fender: anyways...if you ever deal with alex, he's pretty cool too`
`00:50.21`	`dlynes_home`	`justdave: type /topic`
`00:50.50`	`[TK]D-Fender`	`I've run it under FC3 / Centos 4.2 / 4.3 with 2.6 stock kernels without issue... really not sure why your's would bomb unless you wen't psycho in disabling everything YOU thought was irrelevent...`
`00:50.59`	`justdave`	`dlynes_home: thanks. Been too long since I logged in and saw it :)`
`00:51.20`	`justinu`	`~seen sevard`
`00:51.33`	`jbot`	`sevard is currently on #asterisk. Has said a total of 388 messages. Is idling for 8h 4m 48s, last said: 'die?'.`
`00:51.33`	`dlynes_home`	`[TK]D-Fender: I've got my 2.6 kernel trimmed down to the bare essentials, yeah`
`00:52.31`	`dlynes_home`	`[TK]D-Fender: mostly cause i don't feel like waiting for eight hours for it to compile on a VIA C3`
`00:52.40`	`[TK]D-Fender`	`dlynes_home : Lose the "power user" approach and open up a bit... 2% efficiency will turn your card 100% inoperable ;)`
`00:53.23`	`dlynes_home`	`[TK]D-Fender: the only problem it seemed to have was that it thought udev wasn't installed`
`00:53.41`	`dlynes_home`	`[TK]D-Fender: but i think i solved the problem with that card through alex's help`
`00:54.06`	`[TK]D-Fender`	`Cool. I know you'll hit 100% shortly....`
`00:54.23`	`dlynes_home`	`[TK]D-Fender: stupid thing doesn't detect anything properly when the power's not plugged in`
`00:54.52`	`[TK]D-Fender`	`dlynes_home : its got FXS right?`
`00:54.58`	`dlynes_home`	`[TK]D-Fender: yeah`
`00:55.18`	`[TK]D-Fender`	`dlynes_home : Then you may proceed in kicking your own arse for not believing the big print :)`
`00:55.31`	`dlynes_home`	`yeah, but even still`
`00:55.38`	`dlynes_home`	`it should still at least detect the fxo`
`00:55.48`	`dlynes_home`	`not complain about not being able to allocate memory from the pci bus`
`00:56.36`	*** join/#asterisk Lino` (n=Lino@i577BDED4.versanet.de)
`00:57.11`	`dlynes_home`	`anyways`
`00:57.12`	`dlynes_home`	`heh`
`00:57.13`	`[TK]D-Fender`	`dlynes_home : Well at least its operating where no familiar competitor was stable before!`
`00:57.35`	`dlynes_home`	`yeah...it's a hell of a lot more stable in those machines than those crappy x100p cards so far`
`00:58.13`	`dlynes_home`	`I'm getting that particular machine up and running for testing faxing using sangoma cards`
`00:58.30`	`dlynes_home`	`Got another four port fxo that's going up to replace our nortel keysystem`
`00:58.44`	`dlynes_home`	`and another four port with echo canceller to replace someone's panasonic keysystem`
`00:58.53`	`[TK]D-Fender`	`dlynes_home : Don't forget that the A200 is not so nice with faxing yet.... driver updates pending`
`00:59.17`	`dlynes_home`	`plus two single port pri cards to replace the digium four port pri that's flaking out like crazy`
`00:59.28`	`dlynes_home`	`that way i've got a failover machine as well`
`00:59.55`	`asterisk-dud`	`anyone heard of a zyxel phone?`
`01:00.01`	`dlynes_home`	`never`
`01:00.08`	`dlynes_home`	`never heard of cisco, either`
`01:00.35`	`dlynes_home`	`[TK]D-Fender: define not so nice with faxing?`
`01:02.04`	`[TK]D-Fender`	`dlynes_home : Un-good success ratio. They're working on it.`
`01:02.06`	`asterisk-dud`	`my zyxel phone is registered and everything but when i dial it gives two beep and nothing`
`01:02.33`	`[TK]D-Fender`	`Zyzel SUCKS, moreso than many other WiFi Phones (Which ALL suck)`
`01:02.40`	`dlynes_home`	`[TK]D-Fender: in what configuration, though?`
`01:03.03`	`[TK]D-Fender`	`dlynes_home : SpanDSP IIRC. Not sure about pass-through (fxs/fxo)`
`01:03.14`	`dlynes_home`	`[TK]D-Fender: i wasn't going to use it with spandsp`
`01:03.17`	`dlynes_home`	`[TK]D-Fender: only passthrough`
`01:03.32`	`dlynes_home`	`[TK]D-Fender: i.e. zap channel bridging`
`01:04.06`	`dlynes_home`	`[TK]D-Fender: btw...is spandsp required for the fax priority and faxdetect=...?`
`01:04.15`	`[TK]D-Fender`	`dlynes_home : nope.`
`01:04.21`	`dlynes_home`	`[TK]D-Fender: cool`
`01:04.26`	`[TK]D-Fender`	`dlynes_home : Thats jsut Zaptel tone-detection.`
`01:04.56`	`dlynes_home`	`ok, so i don't care about spandsp not working with sangoma then`
`01:05.22`	`dlynes_home`	`anyone that's got fax, i'll make sure they've got at least one analog line`
`01:05.32`	`[TK]D-Fender`	`dlynes_home : Hey, got one for you... I'm on Slack 10.2 and running Swaret. X has died on me (again). Ever run into that?`
`01:05.56`	`dlynes_home`	`what's swaret again? and define "died on me (again)"?`
`01:06.16`	`mishehu`	`swaret is one of those dependency trackers I think`
`01:06.21`	`[TK]D-Fender`	`SWARET = APt-like update tool`
`01:06.24`	`dlynes_home`	`ah`
`01:06.36`	`[TK]D-Fender`	`Goes to the normal -current repos though`
`01:06.37`	`dlynes_home`	`and what was the reason X gave you for it dying?`
`01:06.46`	`mishehu`	`as opposed to SVELT, which would just make your computer look really good.`
`01:07.04`	`[TK]D-Fender`	`Dunno.. I never get to see... it goes black, and the poof frozen`
`01:07.11`	`dlynes_home`	`cool`
`01:07.39`	`dlynes_home`	`check /var/log/Xorg.0.log`
`01:07.49`	`*** join/#asterisk shmaltz (n=mybox@mail.dmaven.com)`
`01:07.52`	`dlynes_home`	`after it crashes and before you start X again`
`01:08.30`	`[TK]D-Fender`	`dlynes_home : Those 2 time points are synonymous with my condition :)`
`01:08.33`	`dlynes_home`	`i don't use crap like swaret or what's that other beastly think for installing gnome onto slackware again?`
`01:08.46`	*** join/#asterisk `Kevin (n=Kevin@64.243.236.20)
`01:08.49`	`[TK]D-Fender`	`Dropline`
`01:08.53`	`dlynes_home`	`yeah`
`01:08.54`	`[TK]D-Fender`	`And i just use KDE.`
`01:08.56`	`dlynes_home`	`that piece of crap`
`01:09.02`	`[TK]D-Fender`	`(or TRY at any rate)`
`01:09.08`	`dlynes_home`	`try?`
`01:09.14`	`dlynes_home`	`kde's rock solid stable`
`01:09.47`	`[TK]D-Fender`	`I think its a GLX issue`
`01:09.55`	`*** join/#asterisk yxa (n=diablo@58.185.90.101)`
`01:09.57`	`[TK]D-Fender`	`thats the last thing it tries loading`
`01:10.14`	`dlynes_home`	`so X isnt' even starting up before locking up?`
`01:10.31`	`[TK]D-Fender`	`not that I can tell...`
`01:10.37`	`*** join/#asterisk cybergyp1y (n=mark@APoitiers-156-1-36-77.w86-213.abo.wanadoo.fr)`
`01:10.44`	`dlynes_home`	`if you look in /etc/X11/xorg.conf`
`01:10.45`	`[TK]D-Fender`	`screen blanks then dies. Not Alt-F1, etc`
`01:10.48`	`dlynes_home`	`you'll see the modules it loads`
`01:10.53`	`dlynes_home`	`comment out all the modules`
`01:11.00`	`*** join/#asterisk hads (n=hads@mail.nice.net.nz)`
`01:11.01`	`dlynes_home`	`and then try starting again`
`01:11.33`	`[TK]D-Fender`	`I could try that I guess... keeping in mind I'm using a custom one I built for TV-Out`
`01:11.43`	`dlynes_home`	`shurg`
`01:11.49`	`dlynes_home`	`deal without having tv-out for a while`
`01:12.04`	`dlynes_home`	`if you've got a special module for that, that is`
`01:12.11`	`[TK]D-Fender`	`dlynes_home : Thats the entire POINT of X on there... its my HTPC :)`
`01:12.15`	`dlynes_home`	`custom "one"?`
`01:12.20`	`dlynes_home`	`custom one what?`
`01:12.26`	`[TK]D-Fender`	`No, NVIDIA TV_OUT (FX 5200)`
`01:12.38`	`[TK]D-Fender`	`I made my xorg.conf file for it.`
`01:12.43`	`dlynes_home`	`commenting out the modules shouldn't affect that`
`01:12.49`	`*** join/#asterisk mmlj4 (n=jkelly@ip70-171-92-106.no.no.cox.net)`
`01:13.13`	`[TK]D-Fender`	`I'll give it a shot, keeping in mind that failure = net-death (this is my home everything box)`
`01:13.20`	`dlynes_home`	`that'll only affect crap like multihead displays, open gl, truetype font rendering, ...`
`01:14.03`	`dlynes_home`	`you're using the drivers supplied by nvidia too, right?`
`01:14.08`	`[TK]D-Fender`	`I'm due to swap that card out with my main PC's GF4-4200 so I can do 1080i in HD through DVI`
`01:14.19`	`[TK]D-Fender`	`Yeah, I'm running the proprietary ones.`
`01:14.58`	`[TK]D-Fender`	`Its was working... every other X release seems to kill my TV out and I'm about ready to throw in the towel and switch to Debian/CentOS`
`01:15.22`	`dlynes_home`	`and how will that fix the problem?`
`01:15.34`	`dlynes_home`	`those are X releases causing the problem, not slackware`
`01:18.07`	`[TK]D-Fender`	`I'm also not sure about dependencies which HAVE gone wonky as well as the PITA that it is to install even some common stuff....`
`01:18.27`	`[TK]D-Fender`	`I100 packages and crap to compile just to run VLC`
`01:18.30`	`dlynes_home`	`that's probably swaret causing your problems then`
`01:18.38`	`dlynes_home`	`vlc?`
`01:19.09`	`yxa`	`is sangoma us or canada based?`
`01:19.12`	`[TK]D-Fender`	`VideoLAN Client.`
`01:19.15`	`dlynes_home`	`i'm guessing swaret is short for swear at et?`
`01:19.18`	`dlynes_home`	`yxa: Canada`
`01:19.25`	`[TK]D-Fender`	`yxa : Markham, Ontario, Canada`
`01:19.34`	`dlynes_home`	`[TK]D-Fender: that's pretty much the same as mplayer, right?`
`01:19.55`	`yxa`	`[TK]D-Fender are their cards well supported under *?`
`01:20.00`	`dlynes_home`	`[TK]D-Fender: i.e. they're from the same root project?`
`01:20.02`	`dlynes_home`	`yxa: yes`
`01:20.14`	`[TK]D-Fender`	`dlynes_home : Not quite... massive internal decode capability, plus streaming from any other player (which means if I'm missing codecs I can stream from my windows PC)`
`01:20.28`	`[TK]D-Fender`	`yxa : Yup, they work great`
`01:20.32`	`dlynes_home`	`[TK]D-Fender: ah`
`01:20.35`	`yxa`	`great`
`01:20.42`	`[TK]D-Fender`	`dlynes_home : No, VLC is its own completely distict project`
`01:21.42`	`{Sean}`	`would anybody be willing to give me 10 mins of * help for $25`
`01:21.45`	`*** join/#asterisk pjchilds (n=pjchilds@pdpc/supporter/student/pjchilds)`
`01:22.32`	`dlynes_home`	`yxa: also great support for sangoma in the unicall device driver abstraction library`
`01:24.32`	`[TK]D-Fender`	`dlynes_home : FreeSWITCH has native support of it (not going through Zaptel) as well....`
`01:25.12`	`dlynes_home`	`[TK]D-Fender: yeah, i know...but i figured he was asking about asterisk in the asterisk channel..i figured it was inappropriate to mention freeswitch`
`01:25.24`	`dlynes_home`	`but since you broke that unspoken rule already....`
`01:25.32`	`dlynes_home`	`yate has excellent support for sangoma, too`
`01:27.09`	`dlynes_home`	`btw`
`01:27.14`	`dlynes_home`	`italy won 2-0 earlier today`
`01:28.05`	`drray`	`beating ghanna`
`01:28.29`	`Nugget`	`http://colo.slacker.com/stuff/italy.swf`
`01:29.58`	`[TK]D-Fender`	`Nugget : CLASSIC`
`01:30.08`	`Nugget`	`quite`
`01:30.09`	`[TK]D-Fender`	`Nugget : But for you... just OLD`
`01:30.13`	`[TK]D-Fender`	`D`
`01:30.14`	`Nugget`	`pout`
`01:31.58`	`shmaltz`	`why am I getting this:ibpri.so.1.0: cannot open shared object file: No such file or directory`
`01:32.29`	`Nugget`	`because you installed a binary package of asterisk and didn't compile it yourself.`
`01:32.46`	`shmaltz`	`Nugget, I did compile it myself`
`01:32.54`	`Nugget`	`then you accidently deleted a library file.`
`01:33.12`	`shmaltz`	`Nugget, I didn't it exists in /usr/lib/libpri.so.1`
`01:33.15`	`shmaltz`	`.0`
`01:33.23`	`shmaltz`	`-rwxr-xr-x 1 root root 264282 2006-06-12 21:28 /usr/lib/libpri.so.1.0*`
`01:33.23`	`Nugget`	`then I have no idea, sorry. :)`
`01:33.40`	`shmaltz`	`Nugget, could it be because I'm running x86_64?`
`01:33.42`	`Nugget`	`ld search path is hosed, maybe, although I'd expect the skies to rain fire and locusts if /usr/lib/ wasn't in it.`
`01:34.19`	`shmaltz`	`Nugget how do I tell the contents of path?`
`01:34.58`	`Nugget`	`man ldconfig`
`01:35.20`	`shmaltz`	`Nugget, you are right:`
`01:35.22`	`shmaltz`	`echo $PATH`
`01:35.23`	`shmaltz`	`/usr/local/sbin:/usr/sbin:/sbin:/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/usr/games:/usr/lib64/java/bin:/usr/lib64/java/jre/bin`
`01:35.42`	`Nugget`	`that's the shell search path. unrelated.`
`01:36.10`	`shmaltz`	`works now :)`
`01:36.27`	`shmaltz`	`after copying libpri.so.1.0 to /usr/lib64`
`01:36.56`	`Nugget`	`interesting`
`01:37.01`	`shmaltz`	`Thank You Nugget`
`01:37.05`	`shmaltz`	`whats so interesting?`
`01:37.09`	`Qwell`	`You actually want to change ld.so.conf`
`01:37.27`	`shmaltz`	`if the shell path doesn't have /usr/lib but /usr/lib64 I guess the same goes for what related`
`01:37.40`	`shmaltz`	`Qwell, what is ld.so.conf?`
`01:37.54`	`Qwell`	`that`
`01:38.28`	`shmaltz`	`ok, man ld.so is my friend`
`01:38.49`	`Qwell`	`but..`
`01:39.04`	`Qwell`	`If it doesn't include /use/lib/, there is probably a reason`
`01:39.10`	`Qwell`	`/usr/lib/ even`
`01:39.15`	`dlynes_home`	`shmaltz: you didn't install libpri`
`01:39.27`	`shmaltz`	`dlynes_home, of course I did`
`01:39.57`	`shmaltz`	`dlynes_home, btw, the problem is hotplug, and I remmemberd that when I ran setup durning install I said dont enable hotplug`
`01:40.08`	`dlynes_home`	`ic`
`01:40.14`	`shmaltz`	`dlynes_home, anyhow it works now`
`01:40.15`	`dlynes_home`	`chmod 755 /etc/rc.d/rc.hotplug then`
`01:43.14`	`shmaltz`	`dlynes_home, i just had to rerun setup script from pkgtool`
`01:44.58`	`*** join/#asterisk juice (n=juice@doc-72-47-32-128.maryville.mo.cebridge.net)`
`01:45.46`	`*** join/#asterisk RopeBurn (n=Tester@Toronto-HSE-ppp3697240.sympatico.ca)`
`01:46.07`	`RopeBurn`	`Hi I was wondering if someone has done the call-through script using a ZAP channel bridge?`
`01:46.18`	`Qwell`	`RopeBurn: huh?`
`01:46.20`	`RopeBurn`	`Im wondering how to detect NOANSWER,BUSY on a native bridge`
`01:46.49`	`RopeBurn`	`Say I call in on ZAP/1 and want my calls forwarded to my cell phone via the next available ZAP channel`
`01:47.20`	`RopeBurn`	`When I do that the available ZAP Channel "answers" the call, not the person whom you are calling..`
`01:48.02`	`RopeBurn`	`exten => 505,1,Dial(ZAP/1/2280075,20,H\|g) ; Jason Mobile`
`01:48.02`	`RopeBurn`	`;exten => 505,2,Wait(20)`
`01:48.02`	`RopeBurn`	`;exten => 505,3,ChanIsAvail(ZAP/1)`
`01:48.02`	`RopeBurn`	`exten => 505,4,GotoIf($[{AVAILSTATUS) = RINGING]?5)`
`01:48.02`	`RopeBurn`	`exten => 505,2,GotoIf($[{DIALSTATUS} = NOANSWER]?4)`
`01:48.03`	`RopeBurn`	`exten => 505,3,GotoIf($[{DIALSTATUS} = CONGESTION]?4:5)`
`01:48.04`	`RopeBurn`	`exten => 505,4,Playback(vm-nobodyavail)`
`01:48.07`	`RopeBurn`	`exten => 505,5,VoicemailMain(504@local)`
`01:48.09`	`RopeBurn`	`exten => 505,6,Hangup()`
`01:48.18`	`RopeBurn`	`oops, 505,4 is something i recently added`
`01:48.28`	`RopeBurn`	`i was going to try wait(20), then ChanisAvail`
`01:48.54`	`dlynes_home`	`RopeBurn: repeat after me...pastebin pastebin pastebin`
`01:48.55`	`dlynes_home`	`~pb`
`01:49.02`	`jbot`	`i guess pb is a place to paste your stuff without flooding the channel - try http://pastebin.com/, or http://pastebin.ca, or http://channels.debian.net/paste, or for #oe use http://oe.pastebin.com, or http://bzflag.pastebin.ca/`
`01:49.12`	`RopeBurn`	`sorry didn't know about that`
`01:53.48`	`*** join/#asterisk chealer (n=chealer@pdpc/supporter/student/chealer)`
`01:54.31`	`chealer`	`hi, is there a CVE ID for the vulnerability fixed in 1.2.9.1?`
`01:57.01`	`*** join/#asterisk asterisk-dud (n=dwwollma@64-42-247-120.mb.skyweb.ca)`
`02:04.41`	`chealer`	`CVE-2006-2898`
`02:06.22`	`chealer`	`if anyone has ops, that could enhance /topic`
`02:06.24`	`*** part/#asterisk chealer (n=chealer@pdpc/supporter/student/chealer)`
`02:23.40`	`*** join/#asterisk P-NuT (n=P-Nut@fw.office.unitedip.net.au)`
`02:23.42`	`*** join/#asterisk cyfred (n=andrew@unaffiliated/cyfred)`
`02:23.50`	`P-NuT`	`So..`
`02:24.22`	`P-NuT`	`Can you run asterisk on windows? And are there ay out of the box solutions like asterisk @ home for windows?`
`02:24.30`	`Corydon76-home`	`No.`
`02:24.42`	`drray`	`yate`
`02:24.52`	`drray`	`but it's not out of the box`
`02:25.00`	`drray`	`cisco call manager`
`02:25.11`	`[TK]D-Fender`	`P-NuT : Learn to deal with Linux.... its not so hard`
`02:25.29`	`drray`	`the fedora core install is simple`
`02:26.17`	`cyfred`	`Hi all, I have 6 lines coming in from the PSTN which are all tied to one number, however there are several 1800 numbers that also point/forward to these lines; im trying to get asterisk to detect the called number; I believe thats impossible with PSTN lines yes??? Is there a way to get a similar functionality?`
`02:27.26`	`hads`	`cyfred: Not that I am aware of with POTS lines.`
`02:27.35`	`drray`	`distinctive ringing?`
`02:28.31`	`cyfred`	`Ive been led to believe that the carrier wont distinctive ring on 1800s; id need to have multiple pstn numbers`
`02:29.07`	`[TK]D-Fender`	`cyfred: You are nearing the point where you'd be better off getting a partial PRI`
`02:29.10`	`drray`	`if you had a PRI it would show up what number you have`
`02:30.12`	`cyfred`	`I know it can be fudged with an ISDN line because I could buy a block of 100 pstn number and forward to one of them; essentially im trying to avoid paying the high setup fees for that though as most of the services will be handled on VoIP with a SIP carrier`
`02:30.31`	`drray`	`then just move your 800's to sip?`
`02:31.31`	`P-NuT`	`[TK]D-Fender: I am running it on Linux dude..`
`02:31.39`	`P-NuT`	`a mate wants to run it on windows.`
`02:31.39`	`drray`	`dude`
`02:31.42`	`P-NuT`	`God knows why`
`02:32.51`	`cyfred`	`drray: is that possible? I thought 1800/1300s tied to pstn lines; so if the sip carrier will tie the 1800 numbers to my sip number can asterisk then detect the incomming called 1800 number?`
`02:33.32`	`drray`	`unless I'm missing a key point`
`02:34.15`	`cyfred`	`ok I need to talk to the sip carrier then and see if they can tie the numbers together...`
`02:34.31`	`drray`	`they'd never touch the PSTN at that point`
`02:34.54`	`RopeBurn`	`there are windows api applications that talk to asterisk I'm guessing`
`02:35.08`	`cyfred`	`yes; and the pstn would remain seperate and could be easily removed when voip is all that I require`
`02:35.20`	`RopeBurn`	`can someone tell me how a person can get asterisk to treat a zap bridge the same as calling a direct zap line`
`02:35.37`	`drray`	`ropeburn what do you mean?`
`02:36.03`	`RopeBurn`	`Im trying to design a call through script that calls my cell phone and returns to my asterisk voicemail if the call is not answered`
`02:36.45`	`RopeBurn`	`I cannot get the timeout to work when zap channels are operating in a native bridge`
`02:37.53`	`hads`	`RopeBurn: Probably becuase analog zap channels can't detect answer etc. Try looking at the answer confirmation option to the dial command.`
`02:40.58`	`RopeBurn`	`yikes`
`02:42.27`	`RopeBurn`	`fair enough`
`02:42.31`	`RopeBurn`	`im gonna stop trying that`
`02:44.27`	`*** part/#asterisk RopeBurn (n=Tester@Toronto-HSE-ppp3697240.sympatico.ca)`
`02:44.45`	`hads`	`People do it, it's just not as pretty as using ISDN lines.`
`02:45.02`	`hads`	`Ah.. seeya then.`
`02:46.02`	`*** join/#asterisk Fao (n=sadsa2@static-72-68-71-2.nwrknj.fios.verizon.net)`
`02:49.40`	`*** join/#asterisk FuriousGeorge (n=brian@ool-43536ea8.dyn.optonline.net)`
`02:50.17`	`FuriousGeorge`	`theyre running out of digits before 1.4`
`02:50.30`	`drray`	`save the digits!`
`02:50.39`	`drray`	`we should have a telethon`
`02:50.54`	`*** join/#asterisk syle (n=blah@unaffiliated/syle)`
`02:52.29`	`*** join/#asterisk MedozasSVR (n=MedozasS@p549BBFE3.dip0.t-ipconnect.de)`
`02:55.03`	`MedozasSVR`	`Hi guys - i need someone with real knowledge of asterisk - i have a setup system working like a charm with realtime asterisk (database dialplan), but what really makes me getting insane is, that the "ex-girlfriend-function" is not working properly - for example if i make a "_X./300" to dial with a specific rule only from the 300 extension, it simply gets ignored`
`02:55.22`	`MedozasSVR`	`any ideas would be great`
`02:56.27`	`MedozasSVR`	`i have also tried something like "_X.\|300"`
`02:57.10`	`MedozasSVR`	`every other rule is working properly`
`02:58.00`	`drray`	`do you have caller id working?`
`02:59.05`	`cyfred`	`grr ok the sip carrier I have currently use doesnt provide a direct in dial number; time to change carriers it would appear`
`02:59.50`	`cyfred`	`drray: so if I change to a sip carrier that will give me a direct in dial number and point the 1800s at that, asterisk will let me route to extensions based on the dialed number??`
`03:01.21`	`drray`	`cyfred - that I don't know`
`03:02.28`	`drray`	`my PRI tells me that someone is calling on line`
`03:03.21`	`drray`	`I don't know that sip would do that`
`03:03.30`	`cyfred`	`it costs next to nothing anyway to have multiple sip numbers so it could have a seperate one for each of the 1800s anyway, which would then definately work as there would be a seperate trunk for each 1800 effectively`
`03:03.31`	`drray`	`unless you made a sip for each inbound numbder`
`03:03.54`	`drray`	`a pri is what you want`
`03:03.59`	`drray`	`well`
`03:04.53`	`drray`	`next time my PRI gets a call, any second now, I'll paste you what asterisk sees verbose 10`
`03:09.22`	`drray`	`and noone is calling`
`03:09.23`	`drray`	`hmmmm`
`03:09.56`	`cyfred`	`the main reason im staying clear of a PRI is the $3k+ setup cost`
`03:10.59`	`drray`	`your telco gives you 8 lines?`
`03:11.06`	`drray`	`and wants them copper over PRI?`
`03:11.18`	`drray`	`where are you?`
`03:14.28`	`[TK]D-Fender`	`cyfred : $3K for setup? Ridiculous... where are you located?`
`03:15.00`	`cyfred`	`australia; at the moment its 4 copper pairs yes which goes into a pabx; id like those 4 pairs to go into asterisk and then have the call locally answered or bounced over sip to an external number`
`03:15.49`	`cyfred`	`i think the 3k is for a full E1 line (i was given the quotes so im just reading numbers off them, didnt actually get them myself so im a little unsure)`
`03:15.51`	`drray`	`hmmm.. what's the longest run I can do with two digium cards?`
`03:16.07`	`dlynes_home`	`drray: what kinda run?`
`03:16.13`	`dlynes_home`	`drray: analog? pri?`
`03:16.53`	`drray`	`pri`
`03:16.58`	`drray`	`in peer mode so to speak`
`03:17.18`	`dlynes_home`	`no idea for that...not really a pri expert`
`03:17.23`	`dlynes_home`	`but analog can go quite a ways`
`03:17.33`	`hads`	`cyfred: What about ISDN BRI?`
`03:17.49`	`dlynes_home`	`we've got one customer with analog lines extended 1.5km up the road`
`03:18.06`	`drray`	`schweet`
`03:18.06`	`dlynes_home`	`and their ethernet is also extended 1.5km up the road`
`03:18.20`	`dlynes_home`	`ethernet can't normally go 1.5km though`
`03:18.26`	`dlynes_home`	`you need special equipment for that`
`03:19.13`	`cyfred`	`hads: i need more than 2 active incomming`
`03:19.41`	`hads`	`3 x BRI?`
`03:19.59`	`cyfred`	`yeah but one is data not voice isnt it?`
`03:20.19`	`dlynes_home`	`drray: looks like maximum 655 feet for pri though, according to zaptel.conf`
`03:20.21`	`cyfred`	`technically I need 6+ anyway`
`03:20.35`	`hads`	`3 x BRR will give you 6 channels.`
`03:20.57`	`hads`	`But if you need more I think 3.5 BRI is about the even point to a partial E1 in Australia.`
`03:21.29`	`hads`	`And PRI cards are easier to setup with Asterisk than BRI.`
`03:23.53`	`cyfred`	`hads: well 10 channel partial PRI is $2035 setup cost; but we already have an E1 data link so id prefer to voip on that as opposed to installing another for voice; and have someway to keep pstn lines for local call residents (for the time being)`
`03:24.27`	`*** join/#asterisk juice (n=juice@doc-72-47-32-128.maryville.mo.cebridge.net)`
`03:25.55`	`drray`	`do you use the full e1 data link?`
`03:27.33`	`cyfred`	`hardly.. well rather i might personally on occasion but generally no, and im happy to set QoS on the voip to be higher than data... id say the average utilisation is < 50%`
`03:27.59`	`hads`	`Fair enough. Going with DID numbers with a SIP provider and forwarding your 1300 numbers is a good way of doing it anyway - like was suggested above.`
`03:28.03`	`drray`	`no, I meant get half the e1 for voice and half to data`
`03:31.32`	`cyfred`	`interesting thought, but the e1 provider is not capable of providing the PRI support`
`03:33.08`	`hads`	`cyfred: http://www.nehos.net/ are meant to be good if you are looking for providers. Haven't used them myself though.`
`03:39.57`	`cyfred`	`alright, looks like we can get several DID numbers one for each 1800/1300 number; setup some trunks and I have what I need; and the pstn lines might go away entirely then, but we'll see that might be a bit hard to pursuade others to do`
`03:42.27`	`Juggie`	`dlynes_home, you can do Pri over ethernet.`
`03:43.54`	`dlynes_home`	`Juggie: yeah...it's called h323 :)`
`03:44.21`	`*** join/#asterisk russellb (n=russell@asterisk/developer-and-stable-maintainer/drumkilla)`
`03:44.22`	`*** mode/#asterisk [+o russellb] by ChanServ`
`03:45.25`	`dlynes_home`	`Juggie: no?`
`03:46.16`	`Juggie`	`no, its not`
`03:46.23`	`dlynes_home`	`oh`
`03:46.28`	`dlynes_home`	`so how do you do it then?`
`03:46.53`	`*** join/#asterisk mike800 (n=michael@68-171-34-225.vnnyca.adelphia.net)`
`03:46.55`	`*** part/#asterisk Fao (n=sadsa2@static-72-68-71-2.nwrknj.fios.verizon.net)`
`03:46.59`	`Juggie`	`uses mac addresses`
`03:47.11`	`Juggie`	`see your /etc/zapata.conf or the zapata.conf.sample`
`03:47.14`	`Juggie`	`look for dynamic=`
`03:47.15`	`dlynes_home`	`any minimum bandwidths?`
`03:47.21`	`mike800`	`juggie: you'll be glad to know i'm using debian now.... :-)`
`03:47.32`	`Juggie`	`mike800, i normally use centos, but is it working ok now?`
`03:47.40`	`Juggie`	`dlynes_home, i have no idea to be honest.`
`03:48.00`	`Juggie`	`i've never used it, but its a way of extending pri over a switched ethernet network or something`
`03:48.29`	`dlynes_home`	`ah...if the minimum bandwidth is too high, my ethernet extension method wouldn't work for pri extension then`
`03:48.33`	`mike800`	`juggie: well, i installed ubuntu on my laptop and i'm about to install debian on my asterisk box`
`03:48.42`	`*** join/#asterisk AsteriskWacko (i=Asterisk@24-117-117-211.cpe.cableone.net)`
`03:49.03`	`Juggie`	`the proper name is TDMoE`
`03:49.14`	`Juggie`	`http://www.asteriskdocs.org/modules/tinycontent/content/docbook/current/docs-html/x1320.html`
`03:51.45`	`Juggie`	`i've never used this`
`03:51.51`	`Juggie`	`but in theory it should work :)`
`03:52.07`	`*** join/#asterisk bmg505 (n=leon@c1-230-12.rndf.isadsl.co.za)`
`03:55.37`	`Sponge_bob`	`anyone have experience with conferences? i'm looking into a web based GUI or agi script that would give me the admin options like mute, kick, lock`
`03:57.08`	`Juggie`	`write one ;)`
`03:57.29`	`*** join/#asterisk viler (i=1000@200.114.70.228)`
`03:58.52`	`*** join/#asterisk mike800 (n=michael@68-171-34-225.vnnyca.adelphia.net)`
`03:59.50`	`Sponge_bob`	`Juggie: i'm no programmer`
`04:00.44`	`Sponge_bob`	`is there one out there already?`
`04:00.53`	`Juggie`	`i wrote one, but it belongs to the goverment`
`04:00.59`	`Juggie`	`so its not my code to release unfortunatally`
`04:01.55`	`Sponge_bob`	`i work with the government so does that mean i can use it?`
`04:02.03`	`Sponge_bob`	`:-)`
`04:03.01`	`dlynes_home`	`Sponge_bob: I would imagine Juggie wrote it for the Canadian government, not the US government :)`
`04:03.36`	`Juggie`	`Canadian :)`
`04:03.45`	`Juggie`	`i will gladly contract to write it again :P`
`04:05.10`	`*** join/#asterisk Freman (n=twitsrus@jaguar.wbs.net.au)`
`04:05.13`	`dlynes_home`	`Juggie: the tdmoe sounds cool`
`04:05.32`	`dlynes_home`	`Juggie: especially for somewhere that needs to extend their whole phone system a mile or so up the road`
`04:05.58`	`Juggie`	`should work so long as your switches route the packets`
`04:06.04`	`Juggie`	`its on a level lower then ip apprentally.`
`04:06.17`	`dlynes_home`	`oh`
`04:06.26`	`dlynes_home`	`then it won't work`
`04:06.31`	`Freman`	`heya fellas. I've got a call file that's channel is Local/s@context with Application: Dial and Data:SIP/9100&SIP/9101 \| s@context is a message to be played. I have the problem of it playing before either line is answered`
`04:06.38`	`Freman`	`can anyone help me fix that?`
`04:08.07`	`Juggie`	`dlynes_home, why not?`
`04:08.49`	`dlynes_home`	`Freman: set it up so that when that extension is dialed in context,s,1 that you do a wait(2) or so, then do an answer, and hten play the message`
`04:09.00`	`*** join/#asterisk implicit (n=implicit@ip68-4-84-39.oc.oc.cox.net)`
`04:09.03`	`dlynes_home`	`Juggie: because the technology is shdsl`
`04:09.31`	`Freman`	`I do that already`
`04:09.35`	`dlynes_home`	`Juggie: so you need to go through two shdsl bridges before you get to the final ethernet mac address`
`04:09.35`	`Juggie`	`dlynes_home, so`
`04:09.45`	`Freman`	`it's playing the message as soon as it dials`
`04:09.50`	`Juggie`	`setup a vlan`
`04:09.57`	`Juggie`	`improvise :)`
`04:10.03`	`dlynes_home`	`It's already using a vlan`
`04:10.16`	`Juggie`	`then the shdsl switches should be invisible`
`04:10.21`	`Juggie`	`*bridges`
`04:10.29`	`dlynes_home`	`Yeah, they are invisible`
`04:10.33`	`dlynes_home`	`but it's all IP`
`04:10.42`	`Juggie`	`nah`
`04:10.49`	`dlynes_home`	`no?`
`04:10.53`	`Juggie`	`it supports arp/mac addresses too :)`
`04:10.57`	`Juggie`	`it woudnt work if it didnt.`
`04:11.02`	`dlynes_home`	`yeah, it supports arp`
`04:11.07`	`dlynes_home`	`i thought arp was ip though?`
`04:11.36`	`Juggie`	`arp resolves an ip into a mac address`
`04:11.56`	`*** join/#asterisk dale_cook (n=dale_coo@67.182.195.160)`
`04:12.02`	`dlynes_home`	`ah`
`04:12.12`	`Juggie`	`a switch doesnt work on an ip level`
`04:12.12`	`dlynes_home`	`yeah...it's only a 1.5Mb connection, too`
`04:12.26`	`Juggie`	`thats a t1`
`04:12.31`	`Juggie`	`you'd get 23 channels`
`04:12.31`	`dlynes_home`	`It's running on a single copper pair`
`04:12.42`	`Juggie`	`but you'd blow all the other bandwidth`
`04:12.47`	`Juggie`	`how many channels do you need?`
`04:12.53`	`Juggie`	`why not just extend w/ g729`
`04:12.54`	`dlynes_home`	`atm, none`
`04:13.04`	`Juggie`	`put an * box on both ends`
`04:13.08`	`dlynes_home`	`I was just thinking for the future, in case we get any similar clients`
`04:13.10`	`Juggie`	`iax across, use g729`
`04:13.17`	`Juggie`	`that should do.`
`04:13.25`	`Juggie`	`g729 would be good over a no loss link`
`04:13.37`	`dlynes_home`	`especially if they have an existing nortel system they want to extend`
`04:13.55`	`dlynes_home`	`yeah...the link is probably very high latency, too`
`04:14.03`	`Juggie`	`1.5mile dsl`
`04:14.05`	`Juggie`	`nah`
`04:14.10`	`dlynes_home`	`ah`
`04:14.20`	`Juggie`	`only a few ms`
`04:14.28`	`dlynes_home`	`I just remember it takes about a minute before it finishes initializing the link setup`
`04:14.37`	`Juggie`	`well ping across it`
`04:15.03`	`dlynes_home`	`yeah...i think it was like 120 or 130ms ping times`
`04:15.07`	`Juggie`	`minor`
`04:15.29`	`Juggie`	`mos scores allow for about 400ms`
`04:15.36`	`Juggie`	`thats when people will start to notice`
`04:15.53`	`dlynes_home`	`ah`
`04:16.07`	`Juggie`	`thats round trip including network insertion time.`
`04:16.14`	`Juggie`	`you should aim for 200ms ping or lower.`
`04:16.33`	`Juggie`	`beause when you factor in compression/decompresson network insertion that can blow 200ms easy`
`04:16.50`	`dlynes_home`	`ic`
`04:17.03`	`Juggie`	`use ulaw and you eliminate compression time though`
`04:17.07`	`P-NuT`	`Has anyone installed asterisk from apt-get instead of from source? Including zaptel-source package to support the x100P is it doable?`
`04:17.22`	`Juggie`	`so say on a high latency, but high bandwith link`
`04:17.25`	`Juggie`	`ulaw would work better`
`04:17.29`	`Strom_C`	`P-NuT: sure it's doable, if you want a horribly outdated version of asterisk`
`04:17.42`	`*** join/#asterisk \|dennis\| (i=dennis@200.32.215.84)`
`04:22.21`	`Ciber311`	`anyone here using axvoice?`
`04:34.07`	`*** join/#asterisk scardinal (n=supreme@port816.ds1-suoe.adsl.cybercity.dk)`
`04:43.05`	`P-NuT`	`Strom_C: How outdated? And is it much less stuffing about?`
`04:43.50`	`Strom_C`	`what?`
`04:44.32`	`P-NuT`	`Strom_C said: P-NuT: sure it's doable, if you want a horribly outdated version of asterisk`
`04:44.50`	`P-NuT`	`is it less work to install?`
`04:44.55`	`P-NuT`	`and easier to update?`
`04:44.57`	`Strom_C`	`I don't understand what you meand by "stuffing about"`
`04:45.10`	`Strom_C`	`yes; just use subversion to get the stable branch`
`04:45.14`	`P-NuT`	`LESS WORK TO INSTALL`
`04:45.35`	`Strom_C`	`if you call "make clean; make install" too much work, then sure`
`04:45.39`	`P-NuT`	`ok`
`04:45.40`	`Strom_C`	`also, dont shout at me`
`04:45.48`	`P-NuT`	`I'm not..`
`04:45.49`	`P-NuT`	`sorry`
`04:45.56`	`Strom_C`	`all caps == shouting`
`04:46.00`	`*** join/#asterisk dale_cook (n=dale_coo@67.182.195.160)`
`04:46.11`	`Strom_C`	`never do that unless you are actually shouting`
`04:47.33`	`Strom_C`	`hell, you could write bash scripts to do everything for you`
`04:47.44`	`Strom_C`	`download, make, install...all in one step`
`04:52.19`	`*** join/#asterisk juampiro (n=sada@dsl-201-128-166-12.prod-infinitum.com.mx)`
`04:52.29`	`juampiro`	`alguien habla espa�ol ??`
`04:54.08`	`juampiro`	`Hello`
`04:58.25`	`*** part/#asterisk dale_cook (n=dale_coo@67.182.195.160)`
`05:02.03`	`*** part/#asterisk P-NuT (n=P-Nut@fw.office.unitedip.net.au)`
`05:13.51`	`*** join/#asterisk Arno[Slack] (i=100@master.infinityperl.org)`
`05:38.28`	`*** join/#asterisk parag7732 (n=root@de1-b1453.alshamil.net.ae)`
`05:38.41`	`parag7732`	`anybody knows about wengo`
`05:47.15`	`*** join/#asterisk jeebusmobile (n=jeebusmo@29palms-cuda1-68-170-33-192.losaca.adelphia.net)`
`06:04.00`	`*** join/#asterisk DaveCanoe (n=Dave@canoe404.dclg.ca)`
`06:11.28`	`*** join/#asterisk subdolus (n=subby@subby.afraid.org)`
`06:11.34`	`stephane_`	`jour`
`06:11.57`	`*** join/#asterisk SuperLag (n=aaron@gentoo/developer/SuperLag)`
`06:16.19`	`*** join/#asterisk acehunky (n=chat_jok@221.128.139.67)`
`06:17.14`	`acehunky`	`can any one tell me difference between asterisk 1.2.9.1 and asterisk 1.0.11.1 ?`
`06:18.38`	`FreezeS`	`look at the changelist`
`06:18.49`	`FreezeS`	`the difference is rather huge`
`06:20.15`	`*** join/#asterisk af_ (n=af@ip-164-240.sn2.eutelia.it)`
`06:27.54`	`*** join/#asterisk RoyK (n=roy@122.80-203-78.nextgentel.com)`
`06:28.26`	`*** join/#asterisk tparcina (n=tparcina@wr-lama.iskon.hr)`
`06:29.06`	`tparcina`	`good morning`
`06:30.05`	`tparcina`	`still sleaping everybody?`
`06:31.20`	`*** join/#asterisk kmilitzer (n=km@office-gw.westend.com)`
`06:31.31`	`*** join/#asterisk oej (n=oej@213.115.215.5)`
`06:39.49`	`*** join/#asterisk martijn_ (n=martijn@i155156.upc-i.chello.nl)`
`06:39.53`	`martijn_`	`morning`
`06:44.54`	`*** join/#asterisk Money5ack (i=moneysac@wer.will.spontanficken.de)`
`06:44.54`	`tparcina`	`morning martijn`
`06:46.43`	`*** join/#asterisk tparcina_ (n=tparcina@wr-lama.iskon.hr)`
`06:52.59`	`*** join/#asterisk P-NuT (n=P-Nut@fw.office.unitedip.net.au)`
`06:54.12`	`*** join/#asterisk [Airwolf] (n=airwolf@83.98.235.220)`
`06:55.11`	`*** join/#asterisk [Airwolf] (n=airwolf@83.98.235.220)`
`07:04.37`	`tparcina_`	`anybody use MCC - billing solution for asterisk?`
`07:05.33`	`tparcina_`	`what billing solution's do you use at all?`
`07:07.18`	`drray`	`I use a perl cgi script`
`07:10.01`	`tparcina_`	`drray: perl cgi script for billing?`
`07:14.19`	`*** join/#asterisk littlejohn (n=little@host144-73.pool877.interbusiness.it)`
`07:14.21`	`drray`	`I have a script that when I want to print a phonebill it searches .csv for extension`
`07:14.25`	`drray`	`then totals a bill`
`07:17.10`	`af_`	`how use gotoif to give busy on a specific cli?`
`07:17.22`	`af_`	`or there is a better way to do it?`
`07:18.30`	`*** join/#asterisk lorinc (n=ang@caracas-1330.adsl.interware.hu)`
`07:18.48`	`tparcina_`	`drray: interesting, but i prefer to use database instead of .csv file`
`07:19.38`	`tparcina_`	`drray: and i need to do billing for monthly period for several users, so i woulf prefer something with user (web) interface so that anybody can bill it easily`
`07:21.52`	`tparcina_`	`drray: MCC looks like good product, but i'll have to use something else (i use mysql and MCC doesn't)`
`07:23.37`	`*** join/#asterisk geoffl (n=geoff@gjctech.plus.com)`
`07:26.29`	`*** join/#asterisk tparcina (n=tparcina@wr-lama.iskon.hr)`
`07:28.56`	`*** join/#asterisk tparcina_ (n=tparcina@wr-lama.iskon.hr)`
`07:30.37`	`*** join/#asterisk mrtwister (n=manopulu@107.250.broadband5.iol.cz)`
`07:34.24`	`*** part/#asterisk websae (n=websae@209-252-79-66.ip.mcleodusa.net)`
`07:41.24`	`geoffl`	`Hi, I'm playing with Asterisk right now and plan to put it into production - but I'm not sure of the best way to set up my network to cope. I intend having two, load-balanced ADSL lines and each will terminate with a different real-world IP address. So, Asterisk can't know its external IP in advance. Is there a way around this - or does it effectively limit Asterisk to only using one ADSL route?`
`07:47.29`	`*** join/#asterisk nagl (n=nagl@rih.zid-nw.wu-wien.ac.at)`
`07:56.21`	`*** join/#asterisk oej (n=oej@213.115.215.5)`
`07:57.33`	`*** join/#asterisk shmeg (n=ben@203.220.28.66)`
`07:59.05`	`shmeg`	`Jun 13 17:33:18 NOTICE[2114] chan_sip.c: Failed to authenticate user "[incomingCID]" <sip:[incomimgCID]@[mysipprovider]:5060>;tag=ff007fb4-ensOBJ00086`
`07:59.14`	`shmeg`	`wondering if someone could take a look at this`
`07:59.40`	`shmeg`	`I have spent two day going around in circles - trying to get a single incoming SIP trunk working`
`07:59.50`	`shmeg`	`this is the result when calling from PSTN network`
`07:59.53`	`*** join/#asterisk qdk (n=qdk@213.237.44.34)`
`07:59.56`	`shmeg`	`any ideas?`
`08:03.40`	`drray`	`are they in the same contexts?`
`08:04.35`	`*** join/#asterisk darkskiez (n=mbryars@194.247.78.146)`
`08:04.57`	`shmeg`	`hmmm thats would be a good question - 2secs`
`08:06.31`	`shmeg`	`yes they are`
`08:07.48`	`oej`	`shmeg: Contexts have nothing to do with autentication`
`08:08.01`	`*** join/#asterisk jaike (n=a@203.115.188.120)`
`08:08.10`	`oej`	`You need to add a peer with hostname= ipaddress of your provider`
`08:08.20`	`oej`	`shmeg: and add insecure=very to that peer`
`08:08.29`	`oej`	`shmeg: In order to avoid authentication for the service provider`
`08:08.54`	`oej`	`shmeg: That way, you can define an incoming context for calls from the service provider too`
`08:09.22`	`jaike`	`what packages do i need o compile asterisk-addons in debian?`
`08:09.26`	`shmeg`	`ok - the only line I dont have in there is type=peer`
`08:09.33`	`*** join/#asterisk jpeeler (n=jpeeler4@host81-154-150-237.range81-154.btcentralplus.com)`
`08:09.41`	`jaike`	`am getting the folowing messages`
`08:09.44`	`jaike`	`app_addon_sql_mysql.c:23:19: mysql.h: No such file or directory`
`08:09.44`	`jaike`	`cdr_addon_mysql.c:38:19: mysql.h: No such file or directory`
`08:10.12`	`jpeeler`	`hello all, what can i do to get rid of this:`
`08:10.13`	`jpeeler`	`Jun 13 09:05:00 NOTICE[26618]: app_dial.c:1055 dial_exec_full: Unable to create channel of type 'ZAP' (cause 0 - Unknown)`
`08:10.40`	`oej`	`shmeg: Peers are matched on IP for incoming calls`
`08:11.07`	`shmeg`	`oej: ok will try`
`08:11.19`	`jaike`	`anyone?`
`08:12.36`	`qdk`	`jaike: you lack mysql libs?`
`08:13.38`	`shmeg`	`oej: could you take a look at this? http://pastebin.ca/65059`
`08:15.08`	`shmeg`	`jaike: install server/client from www.mysql.com`
`08:21.21`	`jaike`	`i did apt-get install mysql-client mysql-server..still having problems`
`08:21.45`	`*** part/#asterisk geoffl (n=geoff@gjctech.plus.com)`
`08:22.14`	`qdk`	`jaike: need i ask again?`
`08:24.19`	`shmeg`	`qdk: maybe you are confusing him as its a statement not a question`
`08:24.36`	`shmeg`	`jaike: I think qdk is trying to tell you you need the mysql libs as well`
`08:24.41`	`jaike`	`qdk: i think so..need to know what packages to download`
`08:25.02`	`qdk`	`jaike: apt-cache search <something>`
`08:25.43`	`jaike`	`qdk: thanks!`
`08:26.10`	`qdk`	`apt-cache search libmysql`
`08:27.02`	`*** join/#asterisk puzzled (n=patrick@puzzled.xs4all.nl)`
`08:27.15`	`jaike`	`it compiled. thanks qdk`
`08:27.18`	`puzzled`	`morning`
`08:27.28`	`qdk`	`jaike: np`
`08:29.46`	`*** join/#asterisk oej (n=oej@213.115.215.5)`
`08:32.43`	`shmeg`	`oej: could you take a look at this? http://pastebin.ca/65059`
`08:34.43`	`*** join/#asterisk v_farmer (i=rvilleri@xs6.xs4all.nl)`
`08:37.27`	`*** join/#asterisk Shoragan (n=shoragan@d072.apm.etc.tu-bs.de)`
`08:38.37`	`*** join/#asterisk Gunnar (n=gunnar@bkkb-gw.bitcon.no)`
`08:45.53`	`*** join/#asterisk zoa (n=kkk@pirus.securax.be)`
`08:51.00`	`*** join/#asterisk Freman (n=twitsrus@ppp125-36.lns2.bne3.internode.on.net)`
`08:52.04`	`Freman`	`Greetings, I'm trying to get the BLF to work with my new GXP-2000. I think I've put everything into the configuration files properly, and I've restarted asterisk and the GXP. All that happens is that my lights lock on solid even when the phones are on hook and not calling`
`08:54.34`	`Freman`	`Must I upgrade to asterisk 1.2 to have this feature work properly?`
`08:55.56`	`key2`	`How can I manage that asterisk doesn't send an INVITE to a phone that is already in USE ?`
`09:07.31`	`*** join/#asterisk [Airwolf] (n=airwolf@83.98.235.220)`
`09:10.26`	`Freman`	`ah, I resolved it... it's got to have the hint included in the primary context of the phone`
`09:17.31`	`*** join/#asterisk ghenry (n=ghenry@mail.suretecsystems.com)`
`09:19.36`	`ghenry`	`I am trying to get my zapata.conf to recognise the 4 modules we have`
`09:19.47`	`ghenry`	`our zaptel.conf is fine`
`09:19.57`	`ghenry`	`I'll do a paste in a sec`
`09:22.39`	`*** join/#asterisk clive- (n=pirch@dsl-146-121-231.telkomadsl.co.za)`
`09:22.45`	`ghenry`	`ANy help would be greatly appreciated. I know it's something dumb!`
`09:22.46`	`ghenry`	`http://scsys.co.uk:8001/2115`
`09:23.20`	`ghenry`	`brb`
`09:26.30`	`*** join/#asterisk Sonderblade (n=mah@host-213.131.147.169.addr.tdcsong.se)`
`09:47.56`	`stoffell`	`I have an * 1.2.7 running since 3 weeks (3w,4days uptime), and I see 269 running asterisk processes, is that normal ?`
`09:48.12`	`stoffell`	`it's a 30-users server, with an E1`
`09:48.56`	`*** join/#asterisk MikeJ__ (n=vircuser@d14-69-8-30.try.wideopenwest.com)`
`09:50.10`	`stoffell`	`1gb ram, 512 mb swap, of wich only 12mb is free`
`09:53.55`	`qdk`	`ps auxww \| grep -i asterisk \| grep -v grep \| wc -l`
`09:53.55`	`qdk`	`1`
`09:54.56`	`stoffell`	`280`
`09:55.21`	`stoffell`	`rising.. owow..`
`09:55.46`	`stoffell`	`281`
`09:56.47`	`qdk`	`stephane_: did you start asterisk with a safe_asterisk script?`
`09:57.38`	`stoffell`	`qdk, i guess you're asking me? :) yes, it's running with safe_asterisk`
`09:58.00`	`qdk`	`oh, sorry stoffell, yes i am. :-D`
`09:59.02`	`stoffell`	`I can do an asterisk restart (when convenient) , but that way I won't know if the problem is * related or something else..`
`09:59.16`	`qdk`	`stoffell: ok, then my guess is that the script is fucked up... it cant see that the asterisk it has started is still running and it spawns a new one... making a sad loop fir disaster.`
`09:59.39`	`stoffell`	`hm, should I be able to find that in the full log ?`
`10:00.22`	`qdk`	`stoffell: kill the script and the asterisk and start asterisk yourself.`
`10:01.20`	`stoffell`	`qdk, hm, well yeah, but at the moment it's not spawning extra process, it stops at 281`
`10:01.25`	`stoffell`	`(but for how long..)`
`10:01.57`	`qdk`	`stoffell: ok, thats only about 280 too many.`
`10:02.34`	`stoffell`	`qdk, on my own * box I've got 34 processes running .. and i restart that one every night (at 00:01 am)`
`10:03.00`	`qdk`	`stoffell: sounds very unstable.`
`10:03.33`	`qdk`	`show uptime`
`10:03.33`	`qdk`	`System uptime: 5 weeks, 6 days, 19 hours, 31 minutes, 25 seconds`
`10:04.02`	`qdk`	`thats from a 2 year old installation which is screaming for an update.`
`10:04.15`	`*** join/#asterisk MatsK (n=mats@141.221.181.62.in-addr.dgcsystems.net)`
`10:04.18`	`stoffell`	`well, that restart i should get rid of, it's not needed anymore`
`10:04.47`	`stoffell`	`the one with the 281 process started creating these 45minutes ago.. and has System uptime: 3 weeks, 4 days, 23 hours, 35 minutes, 51 seconds`
`10:05.05`	`stoffell`	`so, something happened 45 minutes ago`
`10:06.12`	`stoffell`	`can I find out which processes are actually being actively used? (however, there's no zombies)`
`10:06.57`	`qdk`	`stoffell: how can you have a 3 weeks uptine, when you restart the service every night?`
`10:07.12`	`stoffell`	`qdk, that was on another server (wich only has 34 processes)`
`10:07.43`	`stoffell`	`sorry if I didn't make that clear enough ;)`
`10:08.06`	`qdk`	`stoffell: and why are you mixing 1 problem on 1 server with another server?`
`10:08.42`	`stoffell`	`qdk; just to make clear another server also has more then 1 process running, but not 280`
`10:09.04`	`*** join/#asterisk pa (n=paolo@unaffiliated/pa)`
`10:09.17`	`Ahrimanes`	`anyone got nokia E60 working with asterisk?`
`10:09.43`	`qdk`	`stoffell: i guess you are talking only about * processes.`
`10:09.58`	`Ahrimanes`	`* = 1 process with threads`
`10:10.34`	`stoffell`	`qdk; yes`
`10:11.35`	`stoffell`	`Ahrimanes; ah, yes, well, indeed..`
`10:12.14`	`stoffell`	`update.. i have 1 asterisk process with few threads, and 1 of these threads has a lot of other threads also`
`10:12.16`	`stoffell`	`does this help ?`
`10:12.22`	`qdk`	`stoffell: perhaps you have some AGI or whatever running, which spawns extra processes.`
`10:13.23`	`qdk`	`stoffell: how ans with what do you get your info?`
`10:13.26`	`stoffell`	`hm, not at the moment (I don't see any that is)`
`10:13.44`	`stoffell`	`qdk; i used htop to view the threads`
`10:14.54`	`qdk`	`stoffell: ps auxww \| grep -i asterisk \| grep -v grep \| wc -l`
`10:14.59`	`qdk`	`stoffell: what does that say?`
`10:15.11`	`stoffell`	`280`
`10:15.21`	`Ahrimanes`	`qdk: ps auxww wont show threads`
`10:15.35`	`stoffell`	`Ahrimanes, i think it does`
`10:15.39`	`stoffell`	`i'm on debian sarge`
`10:15.44`	`qdk`	`Ahrimanes: im not looking for threads.`
`10:15.47`	`Ahrimanes`	`hm`
`10:15.53`	`Ahrimanes`	`nonstd ps.. ew`
`10:16.12`	`vgster`	`hi, does anyone know if the ut starcom gf200 is on sale yet?`
`10:16.29`	`qdk`	`Ahrimanes: I wanna rule out the possibility that his asterisk_Safe script is fucked.`
`10:17.12`	`stoffell`	`qdk, i think it's not the safe_asterisk, there's no asterisk started in the /var/log/full, and that should be logged, right ?`
`10:17.39`	`qdk`	`stoffell: dont know... dont know of /var/log/full.`
`10:18.22`	`qdk`	`<- lunch`
`10:18.28`	`stoffell`	`ah, k, looked like that, so..`
`10:18.31`	`stoffell`	`have a nice meal`
`10:18.34`	`stoffell`	`;)`
`10:18.53`	`qdk`	`thx. ;-)`
`10:24.17`	`MedozasSVR`	`Hi guys - i need someone with real knowledge of asterisk - i have a setup system working like a charm with realtime asterisk (database dialplan), but what really makes me getting insane is, that the "ex-girlfriend-function" is not working properly - for example if i make a "_X./300" to dial with a specific rule only from the 300 extension, it simply gets ignored`
`10:24.43`	`MedozasSVR`	`any idea would be great`
`10:26.41`	`*** join/#asterisk tparcina (n=tparcina@wr-lama.iskon.hr)`
`10:26.56`	`MedozasSVR`	`nodody here with realtime asterisk knowledge?`
`10:27.14`	`puzzled`	`maybe try the asterisk-users mailinglist`
`10:27.17`	`tparcina`	`MedozaSVR: not me`
`10:27.42`	`tparcina`	`MedozaSVR: but i'm interested do you use unixodbc`
`10:27.56`	`*** join/#asterisk X-Rob_ (n=rob@202.9.51.33)`
`10:27.57`	`MedozasSVR`	`i thought asterisk-users is a bit less worth than users here ;)`
`10:28.01`	`MedozasSVR`	`no, i use mysql`
`10:28.04`	`tparcina`	`does anybody else use unixodbc?`
`10:28.18`	`MedozasSVR`	`but there isn't a big difference`
`10:28.29`	`MedozasSVR`	`what specific database do you want to use`
`10:28.45`	`tparcina`	`MedozaSVR: yes they are, but on asterisk-users, more people read the mail then they are reading this channel right now`
`10:29.10`	`tparcina`	`MedozaSVR: i would like to use MSSQL - wil it work with asterisk and unixodbc?`
`10:29.29`	`MedozasSVR`	`never subscribed to a mailing list shame-on-me - short one-liner?`
`10:30.05`	`MedozasSVR`	`ahh, got it`
`10:30.44`	`tparcina`	`MedozaSVR: the thing is the company has mssql server that is backedup and is totaly redudant, and tey would like to use it instead of mysql (that i use regulary)`
`10:30.47`	`*** join/#asterisk Neptune__ (n=foo@zux221-156-100.adsl.green.ch)`
`10:30.59`	`tparcina`	`MedozaSVR: yes, you should be shamed (because of mailing list :))`
`10:31.49`	`tparcina`	`so, has anybody tried using asterisk-unixodbc-mssql? does it work as it should?`
`10:32.40`	`puzzled`	`tparcina: I don't think there are many ppl using a mickeysoft db if you have postgresql, mysql etc. :)`
`10:32.57`	`MedozasSVR`	`geez - mssql - never been a fan of - but if its in there .... hmmm .... it definitly is possible - but i think there would be some work to do with table structure`
`10:33.49`	`MedozasSVR`	`@tparcina: http://www.asteriskdocs.org/modules/tinycontent/content/docbook/current/docs-html/x1454.html`
`10:34.31`	`MedozasSVR`	`i know only cdr, but better the first step than no one ;)`
`10:34.40`	`tparcina`	`puzzled, i have mysql, but in this perticular case i would prefer to use mssql (because it's allready there and it's much more secure thatn i'll be able to make mysql database)`
`10:35.53`	`tparcina`	`<MedozasSVR: thank you for link, i'll try it now!`
`10:35.56`	`puzzled`	`tparcina: I would never use the word "secure" and mickeysoft in one sentence but if you feel comfortable with it, that's what matters`
`10:36.10`	`MedozasSVR`	`hes right - why pulling out existing infrastructure - but before upgrading to next higher mssql, think of mysql, will ja :))`
`10:36.38`	`MedozasSVR`	`no prob`
`10:37.16`	`tparcina`	`puzzled: i'm secure with mssql because i'm don't administrate it. so, if it fails, it's not my problem :)) so i'm totaly secure about it :))))`
`10:37.29`	`puzzled`	`hehe`
`10:38.08`	`MedozasSVR`	`@tparcina: look at the bottom of http://www.voip-info.org/wiki/view/Asterisk+cdr+odbc - should help you too`
`10:39.08`	`MedozasSVR`	`still nobody with realtime asterisk experience?`
`10:40.32`	`*** join/#asterisk tparcina_ (n=tparcina@wr-lama.iskon.hr)`
`10:43.21`	`*** join/#asterisk tparcina (n=tparcina@wr-lama.iskon.hr)`
`10:44.13`	`tdi`	`re`
`10:44.36`	`tdi`	`does somebody know a contact (jabber or sth ) to the iaxmodem developer ?`
`10:46.38`	`*** join/#asterisk starlein (i=star@fo0bar.de)`
`10:50.14`	`MedozasSVR`	`can anybody help with with realtime asterisk?`
`10:53.31`	`*** join/#asterisk Modcuts (n=bob@lan.proporta.com)`
`10:55.34`	`Ahrimanes`	`anyone using a nokia E60 with asterisk?`
`10:55.44`	`Ahrimanes`	`i get Jun 13 12:55:14 WARNING[46982]: chan_sip.c:3563 process_sdp: Error in codec string 'eo 0/1 RTP/AVP 34' when calling the sip client on the phone`
`10:57.58`	`Poincare`	`anyone experience with 'cascading' BRI lines on * ?`
`10:58.13`	`clive-`	`cascading?`
`10:58.45`	`Poincare`	`if the 2 timeslots on the first BRI are used, getting 3rd call on the next BRI`
`10:58.47`	`fenlander`	`Ahrimanes: eo 0/1? does this thing do video?`
`10:59.00`	`Ahrimanes`	`fenlander: hm well it _is_ a 3g phone..`
`10:59.00`	`Freman`	`is there a working perl module for asterisk 1.2 yet?`
`10:59.24`	`Ahrimanes`	`Freman:what type of perl integration do you want?`
`10:59.41`	`*** join/#asterisk nfi\|ermes (n=ermsewrk@217.220.121.62)`
`10:59.52`	`Ahrimanes`	`fenlander: but happens when i do a voice call to the phone.. calling from the phone works.. somewhat`
`10:59.54`	`clive-`	`poincare, its called "hunting", just ask yourtelco to switch that on for you`
`11:00.12`	`Freman`	`the same that I've got in asterisk 1.0.9 the perl() app`
`11:00.18`	`fenlander`	`Ahrimanes: take an ethereal trace of it`
`11:00.19`	`Ahrimanes`	`Freman: ah res_perl`
`11:00.25`	`Ahrimanes`	`fenlander: ok, gtalk?`
`11:00.26`	`Poincare`	`clive-: well they claim that _I_ have to set it up :-)`
`11:00.33`	`fenlander`	`Ahrimanes: ack`
`11:00.39`	`clive-`	`poincare typical`
`11:00.47`	`Freman`	`yes, res_perl (I get it mixed up with rlm_perl for radius)`
`11:01.22`	`Poincare`	`clive-: so i'm confused with ISDN/BRI... Does our pbx has to send a request or so back to get it on the second bri?`
`11:01.49`	`clive-`	`no`
`11:02.06`	`Poincare`	`and what about the 'call rejected' log message on the first BRI?`
`11:02.14`	`Freman`	`I can't upgrade if there's no working res_perl in asterisk 1.2 )c:`
`11:02.45`	`Ahrimanes`	`Freman: hm, not sure res_perl is actively developed any more :(`
`11:03.05`	`clive-`	`if the first bri is being used, it cant send a call reject.....speak to someone esle at the telco, :)`
`11:03.10`	`Freman`	`hmmm it's an important part of my privacy mod )c:`
`11:03.37`	`Poincare`	`well, I had this "-- Rejecting callwaiting SETUP on channel 0/0 span 2 0" message....`
`11:04.03`	`Poincare`	`so, that's what confuses me... still want to blaim the telco tho :-)`
`11:05.15`	`*** join/#asterisk oej (n=oej@213.115.215.5)`
`11:05.19`	`Freman`	`I suppose I could re-write it to make use of agi...`
`11:07.00`	`*** join/#asterisk tparcina (n=tparcina@wr-lama.iskon.hr)`
`11:21.29`	`ghenry`	`what's exten => s,n,blah mean? then 'n'?`
`11:23.41`	`znoG`	`means it auto-increments the value of n`
`11:27.15`	`X-Rob_`	`it means, _exactly_, look at the priority value of the line above me in the extensions.conf file, and increment it by one.`
`11:27.24`	`X-Rob_`	`which is why you've got to start with a '1'`
`11:27.54`	`SheriF_WorK`	`ghenry: exten => extesion_number,pireorty,Application to be run when u dial this extension.`
`11:28.34`	`ghenry`	`ah, thanks all`
`11:28.47`	`*** join/#asterisk Koshatul (n=evangeli@ip157-65-132.cust.bit.net.au)`
`11:36.53`	`ghenry`	`do I need WaitExten here: http://scsys.co.uk:8001/2120`
`11:43.57`	`*** join/#asterisk tRSS (n=tRSS@193.220.221.2)`
`11:44.41`	`tRSS`	`quick question: what is the command for loading zaptel/ztdummy during boot. I have done it before, but can't seem to remember how to do it again?`
`11:45.40`	`tRSS`	`never mind, found it`
`11:46.01`	`*** join/#asterisk ToyMan (n=stuq@user-12lcqia.cable.mindspring.com)`
`11:53.04`	`*** join/#asterisk rkr245 (n=ravi@81.21.33.35)`
`11:53.23`	`*** join/#asterisk P-NuT (n=P-Nut@CPE-60-225-220-3.nsw.bigpond.net.au)`
`11:55.07`	`P-NuT`	`Yo.`
`11:55.19`	`P-NuT`	`Hey is anyone using a cisco 7905 with asterisk?`
`11:56.41`	`P-NuT`	`or knows how to configure one in sip.conf?`
`12:00.55`	`*** join/#asterisk florz (i=nobody@2001:1a50:503c:0:0:0:0:1)`
`12:04.59`	`*** join/#asterisk X-Rob_ (n=rob@202.9.51.33)`
`12:08.34`	`*** join/#asterisk Guggemand (i=Guggeman@tester2.har-tabt.dk)`
`12:08.44`	`*** join/#asterisk oej (n=oej@213.115.215.5)`
`12:09.42`	`*** join/#asterisk [TK]D-Fender (n=joe@toronto-HSE-ppp4122655.sympatico.ca)`
`12:10.07`	`*** join/#asterisk coppice (n=chatzill@44.199.17.210.dyn.pacific.net.hk)`
`12:12.38`	`nextime`	`i have a strange problem in a DeadAGI script. Running the script from shell, it work great. Running it from * in h,1 exten with DeadAGI, it is execute cleany, it do some file operation but it don't execute a database query to mysql. any idea on that?`
`12:14.11`	`s-ndh-c`	`how does it execute this query?`
`12:15.30`	`*** join/#asterisk tparcina (n=tparcina@wr-lama.iskon.hr)`
`12:16.36`	`*** join/#asterisk aze_ (n=aze@ACayenne-101-1-3-127.w81-248.abo.wanadoo.fr)`
`12:23.23`	`tparcina`	`MedozasSVR: i have followed instructions but i don't understand when /usr/lib/libtdsodbc.so driver should be created. the thing is, i don't have that file... i have installed FreeTDS from RPM, now I'll try to install it from source code`
`12:24.00`	`*** join/#asterisk alucard064 (n=alucard0@ABayonne-152-1-39-252.w83-193.abo.wanadoo.fr)`
`12:24.08`	`alucard064`	`hello`
`12:24.19`	`alucard064`	`someone have ever use astbill`
`12:24.20`	`alucard064`	`?`
`12:29.21`	`alucard064`	`hello`
`12:29.22`	`alucard064`	`someone have ever use astbill`
`12:29.24`	`alucard064`	`?`
`12:29.27`	`nextime`	`s-ndh-c : from python in the agi script, but if i execute it from shell ( not from mysql shell, executing the agi script as ./script.py from bash ) it work`
`12:31.29`	`*** join/#asterisk tparcina_ (n=tparcina@wr-lama.iskon.hr)`
`12:34.31`	`*** join/#asterisk bjohnson (n=bjohnson@jecinc.tor.istop.com)`
`12:35.00`	`s-ndh-c`	`hm`
`12:35.33`	`alucard064`	`hello`
`12:35.36`	`alucard064`	`someone have ever use astbill`
`12:35.38`	`alucard064`	`?`
`12:36.23`	`s-ndh-c`	`nextime: tried to pipe its output into some file?`
`12:36.47`	`s-ndh-c`	`and did you start it as the same user asterisk would start it?`
`12:37.27`	`nextime`	`s-ndh-c : no output at all`
`12:37.38`	`s-ndh-c`	`hm i guess the asterisk user doesnt have a valid shell so you cant test this anyways, but maybe you can see something in the scripts output?`
`12:37.42`	`s-ndh-c`	`ah ok`
`12:37.43`	`nextime`	`yes, i'm working as asterisk user`
`12:38.17`	`nextime`	`s-ndh-c : looking in the mysql log file it seem that from DeadAGI it don't connect to mysqld at all`
`12:38.25`	`*** join/#asterisk myiagy (n=myiagy@mail.voffice.com.br)`
`12:38.29`	`*** join/#asterisk voipaster (n=25x8supp@203.167.120.9)`
`12:38.47`	`nextime`	`if i run it on a normal AGI before the hangup it is working`
`12:39.54`	`SheriF_WorK`	`sccp is for cisco skinny protocol only ?`
`12:43.06`	`*** join/#asterisk tparcina (n=tparcina@wr-lama.iskon.hr)`
`12:44.52`	`key2`	`how comes in INBAND dtmf with asterisk, when I press a key, it works just once in a while ? Is there any parameter with the DTMF that has to be set ?`
`12:46.53`	`*** join/#asterisk momelod (n=momelod@bas5-toronto12-1168029373.dsl.bell.ca)`
`12:47.00`	`momelod`	`hello, good-morning`
`12:47.05`	`*** join/#asterisk tparcina_ (n=tparcina@lns02-0080.dsl.iskon.hr)`
`12:47.09`	`momelod`	`im wondering if anyone here can give me some insight.. i resently installed asterisk on a testing machine, i've configured an analog card w/ 2 fxo ports and 2 fxs ports, SIP, IAX2 but all my calls sound very poor over the aformentioned channels..`
`12:47.29`	`momelod`	`I have been using the gsm codec and ulaw, both sound choppy, w/ echo and the voice seems delayed`
`12:49.19`	`tparcina_`	`does anybody use FreeTDS for unixodbc? when i have installed FreeTDS on Fedora 4 it didn't create /usr/lib/libtdsodbc.so file...`
`12:49.59`	`momelod`	`maybe its someplace else? find / -name libtdsodbc.*`
`12:50.08`	`momelod`	`then create a softlink to /usr/lib/`
`12:50.32`	`*** join/#asterisk kSquared (i=kkaitan@68-65-51-183.chvlva.adelphia.net)`
`12:51.02`	`kSquared`	`hey all.. quick question on compiling zaptel on FC5 from a linux newbie`
`12:52.09`	`kSquared`	`when I try to run the make clean step, I get "*** /lib/modules/2.6.16-1.2133_FC5smp/build: No such file or directory. Stop." and then "Error 2"`
`12:52.21`	`tparcina_`	`momelod: i whis it is, but it isn't...`
`12:52.30`	`kSquared`	`if I try to run make afterwards, it tells me I don't have the sources for the FC5smp kernel installed`
`12:52.34`	`tparcina_`	`momelod: find / -name libtdsodbc.* doesn't find anything`
`12:52.35`	`kSquared`	`where would I get those?`
`12:53.00`	`momelod`	`kSquared: u need the kernel headers for your running kernel`
`12:53.10`	`kSquared`	`can I get them using yum and/or some other pm?`
`12:53.43`	`momelod`	`i've never used redhat so i dont know, but my guess would be yes.. they usually supply kernels headers for this exact reason`
`12:54.07`	`tparcina_`	`momelod: have you worked with asterisk-linuxodbc (using FreeTDS)?`
`12:54.13`	`momelod`	`tparcina: i guess u have to install the lib manually..`
`12:54.25`	`momelod`	`tparcina: no`
`12:54.51`	`momelod`	`i did have it working with mysql, havent heard of linuxodbc`
`12:54.59`	`key2`	`how comes in INBAND dtmf with asterisk, when I press a key, it works just once in a while ? Is there any parameter with the DTMF that has to be set ?`
`12:56.01`	`tparcina_`	`momelod: i have no idea how to install it manualy, even don't know where to start... i gues this is just to much for my linux knowledge :(`
`12:56.12`	`Katty`	`morning`
`12:56.39`	`[TK]D-Fender`	`key2 : Stop repeating yourself. Inband sucks because its trying to decode DTMF by AUDIO withing a choppy stream.`
`12:56.40`	`tparcina_`	`morning Katty`
`12:57.00`	`tparcina_`	`Katty - he or she?`
`12:57.19`	`tRSS`	`my boot script for asterisk and zaptel are not working. I get 'asterisk ended with exit status 1' and then it tries to restart again and fail. similarly, my zaptel also fails. i made my boot script using 'make config' in the asterisk and zaptel (source directories)`
`12:58.00`	`tRSS`	`how can I fix this?`
`12:58.31`	`momelod`	`tRSS: are u running asterisk as root or a user?`
`12:58.41`	`tRSS`	`momelod: as root`
`12:59.26`	`[TK]D-Fender`	`tRSS : Try just running it through "asterisk -gvvvvvc" and see where it bombs out instead of the auto-reload script.`
`12:59.28`	`momelod`	`hrmm.. i had that problem when i was running as a user..?`
`12:59.43`	`tRSS`	`momelod: i am able to run asterisk and zaptel normally. by the way, i don't have any digium hardware. i am using ztdummy`
`13:00.08`	`tparcina_`	`tRSS: in logger.conf start full logging and se why asterisk doesn't start`
`13:00.25`	`momelod`	`check the logs to see why asterisk is failing.. maybe run 'asterisk -c' and read the warnings/errors`
`13:00.46`	`tRSS`	`alright give me a few mins. and let me check`
`13:00.54`	`tparcina_`	`he can't run asterisk -c - because of safe asterisk`
`13:01.01`	`key2`	`[TK]D-Fender: and is there any way to debug what's wrong ? because for some reason, I have to press 50x on a key so asterisk sees the dtmf key.`
`13:01.24`	`momelod`	`killall asterisk`
`13:01.26`	`key2`	`[TK]D-Fender: so I was wondering if it was possible to tell asterisk the lenght of the inband key`
`13:01.29`	`momelod`	`then asterisk -c`
`13:01.38`	`tzanger`	`key2: zapata interface?`
`13:02.04`	`Katty`	`tparcina_: quite female.`
`13:02.07`	`tzanger`	`tparcina_: that is simple; don't run safe_asterisk.`
`13:02.43`	`tparcina_`	`Katty, you are first female that i read on this channel :))`
`13:02.48`	`[TK]D-Fender`	`key2 : Stop using inband.`
`13:03.01`	`Katty`	`tparcina_: so?`
`13:03.05`	`tparcina_`	`tzanger, it isn't me, it's tRSS`
`13:03.09`	`Katty`	`hey tzanger`
`13:03.15`	`[TK]D-Fender`	`key2 : And there is no easy way to lengthen the DTMF time (100msec IIRC)`
`13:03.17`	`tzanger`	`hello`
`13:03.30`	`*** join/#asterisk stuartcw (n=chatzill@softbank221025056004.bbtec.net)`
`13:03.36`	`tparcina_`	`Katty, so I'm glead that there are females on this channel`
`13:03.43`	`*** join/#asterisk feld_ (n=feld@12.148.212.157)`
`13:03.46`	`Katty`	`tparcina_: k`
`13:03.55`	`docelmo`	`Katty is bout the only asterisk female except for 2 others I know`
`13:04.06`	`docelmo`	`but she's the coolest MEW!`
`13:04.13`	`Katty`	`docelmo: freak.`
`13:04.19`	`Katty`	`docelmo: if i give you something to eat, will you hush?`
`13:04.22`	`docelmo`	`DAMN RIGHT!`
`13:04.26`	`docelmo`	`no`
`13:04.31`	`[TK]D-Fender`	`...`
`13:04.37`	`Katty`	`docelmo: aww ;)`
`13:04.48`	`feld_`	`girls can't use the internet. don't fool yourself docelmo`
`13:04.58`	`feld_`	`don't fall for the evil trickery`
`13:04.58`	`Katty`	`docelmo: s'ok, i love you anyway.`
`13:05.10`	`tparcina_`	`everybody gets hug from Katty except me? hell, why?`
`13:05.14`	`tzanger`	`The internet: where men are men, women are also men, and little girls are FBI agents.`
`13:05.18`	`Katty`	`tparcina_: yeahi don't know you. at all.`
`13:05.25`	`feld_`	`tzanger, amen`
`13:05.33`	`docelmo`	`I got a cup here on my desk that says "I dont need to know the internet. My wife knows everything" So maybe they do..`
`13:05.53`	`docelmo`	`HELL YA!`
`13:06.03`	`tparcina_`	`tzagner, you made me laugh :))`
`13:06.21`	`Katty`	`there is plenty of data to prove i am female`
`13:07.05`	`[TK]D-Fender`	`tzanger : Saw that "sexual predators" report huh?`
`13:07.06`	`tparcina_`	`Ketty, well do you wan't to get know me better ;)`
`13:07.36`	`Katty`	`cheesy.`
`13:07.42`	`tparcina_`	`Katty, come on, prove it!`
`13:07.49`	`Katty`	`...`
`13:08.02`	`tparcina_`	`..`
`13:08.03`	`tparcina_`	`.`
`13:08.06`	`tparcina_`	`go!`
`13:08.22`	`docelmo`	`yep she's female she is lacking certain anatomy`
`13:08.26`	`Katty`	`further proof that males never grow up.`
`13:08.52`	`docelmo`	`And women.. Cant live with em.. Cant live w/o em.. Cant kill em..`
`13:08.59`	`Katty`	`precisely.`
`13:09.03`	`tparcina_`	`why would we grow up? to do housework? hell no!`
`13:09.08`	`Katty`	`we're your living hell, so you can appreciate heaven when you get there.`
`13:09.10`	`[TK]D-Fender`	`Katty : "Whats the difference between men and government bonds? Government bonds MATURE"`
`13:09.16`	`Katty`	`[TK]D-Fender: hehe`
`13:09.23`	`Katty`	`[TK]D-Fender: that's pretty good.`
`13:09.45`	`[TK]D-Fender`	`All too true. (for the majority of the online world)`
`13:10.56`	`tparcina_`	`come on guys, and Katty :), this is asterisk channel - help me to connect asterisk to mssql with odbc`
`13:11.19`	`tparcina_`	`and stop folling around with girls (and boys - for Ketty)`
`13:11.39`	`*** join/#asterisk ToTo (n=ToTo@81.174.33.2)`
`13:11.44`	`*** join/#asterisk somegeek (i=levin@tor/regular/somegeek)`
`13:12.07`	`*** join/#asterisk brad_mssw (n=brad@shop.monetra.com)`
`13:12.18`	`Katty`	`[TK]D-Fender: someday i'm going to figure you males out ;)`
`13:12.40`	`*** join/#asterisk lilo (i=levin@freenode/staff/pdpc.levin)`
`13:12.52`	`*** join/#asterisk Ariel_ (n=Ariel@70.46.87.158)`
`13:14.19`	`Katty`	`Ariel_: hey hun`
`13:14.31`	`[TK]D-Fender`	`Katty : An unfulfilling quest... espeically given your research subjects...`
`13:14.45`	`Ariel_`	`morning everyone`
`13:15.07`	`kSquared`	`hmm`
`13:15.19`	`kSquared`	`I'm still having a lot of trouble getting zaptel to compile on fc5`
`13:15.24`	`Katty`	`[TK]D-Fender: perhaps i should just practice billiards instead.`
`13:15.30`	`kSquared`	`I downloaded the kernel headers`
`13:15.37`	`Katty`	`[TK]D-Fender: banking is more satisfying than males ;)`
`13:15.39`	`kSquared`	`(with kernel and kernel-devel packages)`
`13:16.26`	`tRSS`	`alright guys, I dont see anything wrong when I do a asterisk -vvvvgc. a few warnings and one error (about not being able to connect to my mysql server). I have a strong feeling that the bootup script installed has some sort of a bug or maybe safe_asterisk has some sort of a bug`
`13:16.27`	`kSquared`	`but make tells me I don't "appear to have the kernel sources installed"`
`13:17.09`	`kSquared`	`do I need the entire kernel source or will just the headers suffice?`
`13:18.36`	`*** join/#asterisk eipi (n=eipi@139-213-126-200.fibertel.com.ar)`
`13:18.57`	`[TK]D-Fender`	`Katty : Billiards... good mindless fun....`
`13:19.08`	`momelod`	`is the g729 codec really worth buying a lisence?`
`13:19.20`	`[TK]D-Fender`	`momelod : If you need the bandwidth, yes.`
`13:19.21`	`momelod`	`is there a way i can test it for free?`
`13:19.29`	`[TK]D-Fender`	`momelod : Whats to "test"?`
`13:19.46`	`momelod`	`lol!`
`13:19.53`	`Katty`	`[TK]D-Fender: i'll say. at least it's relaxing.`
`13:19.59`	`momelod`	`no, its just that ive used ulaw and gsm they both sound really bad`
`13:20.00`	`[TK]D-Fender`	`momelod : It works, it sounds in the same class as GSM, a bit clearer in some ways, and takes up less bandwidth.`
`13:20.03`	`tRSS`	`i believe there is an educational version of g729 available`
`13:20.16`	`tRSS`	`for testing purposes`
`13:20.21`	`tRSS`	`only`
`13:20.22`	`momelod`	`thanx tRSS`
`13:20.34`	`[TK]D-Fender`	`Katty : Yup... In my prime I'd head out to the pool halls around 7-8pm, and leave at closing :) I was a 9-ball god in my circles...`
`13:21.18`	`momelod`	`im just wondering why my calls sounds so bad, they have echo, delay and jitter.. what should i be tweaking? i cant believe that all asterisk installes are as bad as mine`
`13:21.55`	`momelod`	`in terms of sound quality i mean`
`13:22.17`	`Katty`	`[TK]D-Fender: nice.`
`13:22.27`	`*** join/#asterisk DaveCanoe (n=Dave@canoe404.dclg.ca)`
`13:23.12`	`s-ndh-c`	`what ip phones are good?`
`13:23.29`	`momelod`	`i re-compiled all the sources with the tweaks for my cpu, ive tried the different codecs and echo cancellers with no success.. the quality it just too poor for real use`
`13:24.00`	`s-ndh-c`	`GXP 2000 SIP Phone or thomson speedtouch 2030?`
`13:24.04`	`s-ndh-c`	`which is better?`
`13:24.05`	`momelod`	`what am i missing?`
`13:24.13`	`tRSS`	`maybe your machine is not upto the level for asterisk momelod, but i can be wrong also`
`13:24.48`	`momelod`	`i thought so too, and i went from a 1ghz 512mb machine to a 2.4ghz 1gb machine`
`13:24.53`	`momelod`	`no chance`
`13:24.55`	`momelod`	`change`
`13:24.57`	`tRSS`	`really`
`13:25.18`	`tRSS`	`i have asterisk running of a P4 3.2 Ghz HT , with 512 MB ram and it works fine`
`13:25.46`	`momelod`	`its wierd, even on the LAN i experience delay and echo..`
`13:25.52`	`*** join/#asterisk copland (n=stonecol@209.216.65.10)`
`13:26.04`	`momelod`	`i think there has to be a tweak someplace, but where?`
`13:26.32`	`copland`	`anyone know what this is -- Got SIP response 400 "Invalid Subscription-State" back from 192.168.1.50`
`13:26.37`	`tRSS`	`momelod: make sure your network is not choked somewhere? ;)`
`13:26.37`	`stoffell`	`s-ndh-c, i prefer thomson, better quality`
`13:26.51`	`stoffell`	`momelod, using sip only or also zap?`
`13:27.00`	`momelod`	`sip/zap/iax2`
`13:27.17`	`momelod`	`even my zap calls have echo, but they are much better then sip or iax2`
`13:27.39`	`s-ndh-c`	`stoffell: ok`
`13:28.12`	`momelod`	`i dont think my network is bogged, cause we all get crazy fast speeds locally and from the internet`
`13:28.40`	`momelod`	`i can stream music and it sounds perfect`
`13:29.10`	`tparcina_`	`s-ndh-c, i have gpx 2000 and it is ok. cisco is better, but i'm satisfaided with gpx also`
`13:29.36`	`stoffell`	`momelod, read on the voip-info.org on echo, a lot depends on what is connecting to what.. (sip-sip, sip-zap, etc...)`
`13:30.30`	`hypnox`	`momelod so when youphone from a variety of sip phones to say asterisk's voicemail you get bad quality?`
`13:30.42`	`tparcina_`	`momelod: what phones do you use?`
`13:31.17`	`momelod`	`im just testing now, ive used xlite, idefisk, and we have one cheap-o noname hardware sip phone`
`13:31.48`	`tparcina_`	`momelod: how meny hardwer phones do you have?`
`13:31.54`	`momelod`	`i cant really tell with voicemail, it sounds okay.. its when your talking with someone live that the echo/delay/jitter are more noticable`
`13:32.02`	`momelod`	`just one hardware phone`
`13:32.10`	`hypnox`	`when you're talking to someone who is where`
`13:32.14`	`momelod`	`and also an analog phone`
`13:32.23`	`*** part/#asterisk stuartcw (n=chatzill@softbank221025056004.bbtec.net)`
`13:32.30`	`tparcina_`	`momelod: thare is the problem - you use softphone.`
`13:32.33`	`momelod`	`im in my office, my co-worker is in his office 10 feet away`
`13:32.48`	`[TK]D-Fender`	`momelod : GXP-2000 firmware sucks and has been plagued with echo even on direct SIP calls, and lets not even start about Zaptel SW EC....`
`13:33.00`	`tparcina_`	`momelod: when you hear echo, the problem is on the other side`
`13:33.24`	`coppice`	`oh, go on. everyone loves a good moan about the software EC :-)`
`13:33.29`	`momelod`	`hrmm.. so your saying i need a real high quality phone to test ?`
`13:33.47`	`momelod`	`but why would the softphones be bad?`
`13:34.21`	`s-ndh-c`	`cause all is done in softwar?`
`13:34.25`	`s-ndh-c`	`*software`
`13:34.26`	`*** join/#asterisk JackEStorm (n=thinkthi@ip68-225-72-125.no.no.cox.net)`
`13:34.29`	`momelod`	`arn't hardphones basically a cheap computer that runs software anyways?`
`13:34.43`	`*** join/#asterisk A-Tuin\|work (n=A-Tuin@212.41.185.81)`
`13:34.58`	`tparcina_`	`momelod: it isn't always, but in more cases it is. main reason low quality microphone`
`13:34.59`	`[TK]D-Fender`	`coppice : I've got nice HWEC thank you :)`
`13:35.26`	`tparcina_`	`Fender, you run Digium 405?`
`13:35.27`	`coppice`	`nah. its just software in a different place`
`13:35.39`	`s-ndh-c`	`if i start asterisk with -vvvvc it should tell me about all ongoing calls right?`
`13:35.54`	`[TK]D-Fender`	`tparcina_ : NOpe`
`13:36.01`	`tparcina_`	`yes, just do - show channels`
`13:36.16`	`[TK]D-Fender`	`tparcina_ : And the 405 does not have HWEC.`
`13:36.16`	`tparcina_`	`fender, well, what do you use?`
`13:36.23`	`[TK]D-Fender`	`tparcina_ : Sangoma A104d`
`13:36.59`	`tparcina_`	`Fender: what Digium 405 uses? or i have missed the number?`
`13:37.11`	`*** join/#asterisk ambriento (n=ambrient@www.cobranet.com.br)`
`13:37.27`	`[TK]D-Fender`	`tparcina_ : 406/411 = HWEC.`
`13:37.44`	`[TK]D-Fender`	`tparcina_ : 110/405/410 = SWEC`
`13:37.54`	`tparcina_`	`fender, i have started with Digium, and it works. And i dont change hardware that works :)`
`13:38.05`	`coppice`	`its just like sports scores`
`13:38.07`	`coppice`	`Digium 405 \| Sangoma 104`
`13:38.08`	`coppice`	`Digium's in the lead at this moment :-)`
`13:38.08`	`tparcina_`	`Fender, ok, thank you`
`13:38.10`	`[TK]D-Fender`	`tparcina_ : If it works for you hey... whatever...`
`13:38.57`	`[TK]D-Fender`	`coppice : But Sangoma is 7 characters long VS Digium at 6 ! Ah HAAA!!!!!!!! Lead regained!`
`13:39.22`	`s-ndh-c`	`it works wonderfull from softphone -> asterisk ->misdn->other pbx ->phones`
`13:39.30`	`s-ndh-c`	`but not the other way around`
`13:39.33`	`tparcina_`	`Fneder, you have tried everything.... have you tried storing asterisk CDR to mssql?`
`13:39.48`	`s-ndh-c`	`like asterisk wouldnt notice the incomming call at all`
`13:39.49`	`coppice`	`any cisco T.38 experts in the house?`
`13:41.27`	`s-ndh-c`	`any idea what could be wrong?`
`13:41.32`	`*** join/#asterisk wunderkin (i=kev@ip68-226-113-228.ph.ph.cox.net)`
`13:41.58`	`coppice`	`nope. that's why i'm looking for a cisco t.38 expert :-)`
`13:43.30`	`*** join/#asterisk unixgeek (n=unixgeek@216-220-234-197.exploremaine.com)`
`13:43.52`	`docelmo`	`coppice what do you want to know about cisco t.38?`
`13:43.53`	`[TK]D-Fender`	`tparcina_ : Nope, plenty of things I havent tried. Dundi, Realtime, SQl storage of ANYTHING, AGI, T.38`
`13:44.48`	`tparcina_`	`Fender, you have disaponte me :(`
`13:45.06`	`[TK]D-Fender`	`tparcina_ : Good.... a small warm-up for the real world.`
`13:45.14`	`*** join/#asterisk mercestes (n=merceste@cpe-70-116-149-83.houston.res.rr.com)`
`13:45.16`	`coppice`	`we are testing with a cisco. we negotiate with it to go from voice to T.38, using a new port for the UDPTL. the cisco keeps switching to UDPTL, but sending it to the old port where the RTP was going`
`13:45.24`	`[TK]D-Fender`	`tparcina_ : Now get your hands off your nuts and seize the day!`
`13:46.23`	`docelmo`	`What are the settings your using for t.38`
`13:47.11`	`tparcina_`	`Fender, it's 15min unitl my close time. i ton't think that i'll do so much in that time - it's better to keep my hends where they are :)))`
`13:47.16`	`coppice`	`what kind of settings for this are there on a cisco?`
`13:48.42`	`tparcina_`	`coppice, i see that you use cisco. have you ever connected asterisk with ccme?`
`13:49.02`	`coppice`	`i don't use cisco`
`13:49.18`	`zoa`	`coppice i see you speak english, did you ever consider talking swahili ?`
`13:49.27`	`zoa`	`:p`
`13:49.40`	`*** join/#asterisk blaylock (n=sfv100@snap.helixsystems.com)`
`13:49.42`	`coppice`	`ngoh m'sik fei jau man`
`13:49.43`	`ambriento`	`hehehe`
`13:49.59`	`tparcina_`	`zoa, give me a min so i can think for an answer :))`
`13:50.47`	`tparcina_`	`has anybody connect asterisk with cisco ccme?`
`13:51.00`	`ambriento`	`what was that coppice ?`
`13:51.38`	`coppice`	`well, it wasn't swahili, unless by fluke`
`13:51.59`	`coppice`	`now, in cantonese it means I don't understand swahili`
`13:52.33`	`[TK]D-Fender`	`:)`
`13:54.12`	`[TK]D-Fender`	`coppice : News report about even schmuck whitey getting Chinese characters tatooed on themselevs with supposed means like "lova", "power", etc... when in reality they say "Gas", "Gullible White Boy", "etc :D`
`13:54.14`	`ambriento`	`omg, I barelly say 'nin hao'`
`13:54.37`	`ambriento`	`as far as I know it is mandarin`
`13:55.45`	`coppice`	`D-Fender: that was the specific reason I learned to read :-)`
`13:56.49`	`coppice`	`the expression "Gullible White Boy" has come up a couple of times recently. must have been in a big news story. I saw the chinese, and it actually did say gullible white boy`
`13:56.50`	`ambriento`	`so coppice, would share with us what chinese chars do you have tattoed ?`
`13:57.07`	`tparcina_`	`Katty, head right - you are all bunch of kids :P`
`13:57.31`	`coppice`	`i don't have tattoos, but at least I am adequately prepared to phrase my own`
`13:57.39`	`tRSS`	`why do I keep getting missing /dev/zap when my zaptel is being loaded at boot time. it worked fine once, but started giving this error after that. any ideas? i can do a modprobe zaptal && modprobe ztdummy manually`
`13:59.00`	`*** join/#asterisk MikeJ__ (n=vircuser@d14-69-8-30.try.wideopenwest.com)`
`13:59.27`	`tparcina_`	`ok fender, coppice and all other that speak swahili :)) i'll going home now. have a nice day, and don't get to tired working with asterisk`
`13:59.29`	`tparcina_`	`bye`
`14:00.07`	`tRSS`	`bump!?`
`14:00.32`	`*** part/#asterisk kmilitzer (n=km@office-gw.westend.com)`
`14:00.36`	`LokeshIndian`	`tRSS:do u have /dev/zap/ctl present ?`
`14:00.41`	`coppice`	`ambriento: I guess yuo mean ni hao. nin hao would be good year`
`14:01.27`	`ambriento`	`wow, really?`
`14:01.41`	`tRSS`	`Lokeshindian: I can see /dev/zap but i can't go inside zap`
`14:02.12`	`tRSS`	`Lokeshindian: for lsmod, i can see ztdummy is loaded, but not zaptel`
`14:02.23`	`coppice`	`ambriento: this white boy is not so gullible :-)`
`14:03.14`	`LokeshIndian`	`i know this problem i was having the same prob wait a min i can provide you solution`
`14:03.14`	`ambriento`	`hmmm`
`14:03.14`	`*** join/#asterisk Arno[Slack] (i=100@master.infinityperl.org)`
`14:03.23`	`tRSS`	`perfect, thanks`
`14:03.32`	`ambriento`	`coppice, what about shin nien hao?`
`14:04.01`	`ambriento`	`i don't even know what a gullible is... let me learn this quickly :)`
`14:04.37`	`ambriento`	`I got it... i guess ;)`
`14:04.49`	`*** join/#asterisk postel_ (n=jp@unaffiliated/postel)`
`14:07.52`	`[TK]D-Fender`	`ambriento : Did you know the world gulliable isn't even in the dictionary? :)`
`14:07.58`	`[TK]D-Fender`	`word*`
`14:08.24`	`LokeshIndian`	`tRSS: do u have /etc/udev/rules.d/zaptel.rules file present ?`
`14:08.29`	`ambriento`	`not really`
`14:08.34`	`ambriento`	`I got it from cambrigde`
`14:08.41`	`ambriento`	`oops, cambridge*`
`14:09.04`	`[TK]D-Fender`	`ambriento : .... that was a JOKE...`
`14:09.14`	`*** join/#asterisk tanvalmg (n=mguevarr@67-134-234-194.dia.static.qwest.net)`
`14:09.17`	`brad_mssw`	`[TK]D-Fender: the actual joke is ... did you know they're dropping the word 'gullible' from the dictionary`
`14:09.26`	`tRSS`	`Lokeshindian: let me check real quick`
`14:09.31`	`ambriento`	`hmm`
`14:09.39`	`brad_mssw`	`[TK]D-Fender: that's from like grade-school though ... geez`
`14:09.42`	`ambriento`	`looks liek somebody missed the joke <--`
`14:09.46`	`ambriento`	`like*`
`14:10.03`	`tanvalmg`	`Hi there...just want to know if anyone here has installed a Digium TDM400P in an IBM Netfinity server`
`14:11.00`	`[TK]D-Fender`	`brad_mssw : And it just keeps getting better!`
`14:11.12`	`tRSS`	`Lokeshindian: I have this file but owner and group are set for asterisk, shouldn't this be root, since I am running my asterisk as root?`
`14:11.17`	`*** join/#asterisk littleball (n=littleba@cm52.epsilon174.maxonline.com.sg)`
`14:11.57`	`LokeshIndian`	`tRSS: yes exactly u allow the permission to this file and see if it works`
`14:12.33`	`LokeshIndian`	`tanvalmg:what is ur problem ?`
`14:14.11`	`*** join/#asterisk skac (i=ashica@nebulacore.net)`
`14:16.20`	`*** join/#asterisk dale_cook (n=dale_coo@66.239.3.2.ptr.us.xo.net)`
`14:16.31`	`*** part/#asterisk littleball (n=littleba@cm52.epsilon174.maxonline.com.sg)`
`14:17.46`	`tRSS`	`Lokeshindian: I have tried what you told me, but I believe this file is created for the purpose of running * as non-root, but in my case, I am running it as root. since, my zaptel is not coming online, I am also getting 'Asterisk ended with exit status 1' error later on... i really need some help here`
`14:19.19`	`LokeshIndian`	`tRSS: but in my case i m running asterisk as a root and group and owner of this file is also root...i m sure you have the permission problem with this file`
`14:19.27`	`*** join/#asterisk \|dennis\| (i=dennis@200.32.215.84)`
`14:19.59`	`tRSS`	`which file are you referring to? the /etc/udev/rules.d/zaptel.rules file or /dev/zap/* files?`
`14:20.30`	`LokeshIndian`	`zaptel.rules file and it should have some entries`
`14:21.03`	`ambriento`	`tRss, do you use udev?`
`14:21.37`	`tRSS`	`ambriento: how can I check for udev? but if i am to guess, i am guessing yes. I am using FC4`
`14:21.40`	`*** join/#asterisk C4T3l (n=rcall01@216.54.143.2)`
`14:22.01`	`momelod`	`dmesg \|grep udev`
`14:22.26`	`*** join/#asterisk AltnTab (n=ecs@nrjsoft13.networx-bg.com)`
`14:22.37`	`tRSS`	`didnt work`
`14:23.09`	`momelod`	`sorry i should have checked before i said that, it doesnt work.. please ignore it`
`14:23.10`	`ambriento`	`start typing udev[TAB] and see if there's stuff in therr`
`14:23.18`	`ambriento`	`there*`
`14:24.18`	`ambriento`	`brb`
`14:25.23`	`*** join/#asterisk viler (i=1000@200.114.70.228)`
`14:25.59`	`*** join/#asterisk mog (i=ejabberd@68.62.237.103)`
`14:26.30`	`tRSS`	`yes, i can see a lot of udev related stuff`
`14:32.27`	`*** join/#asterisk Koshatul (n=evangeli@ip157-65-132.cust.bit.net.au)`
`14:32.48`	`Dr-Linux`	`question, how can i send dialed number in a variable with Dial or Goto application?`
`14:33.16`	`tanvalmg`	`LokeshIndian: we tried to install the TDM400P in an IBM Netfinity 4000R, and the card can not be recognized`
`14:33.16`	`Dr-Linux`	`i wanna send dialed number in a variable to AGI script`
`14:37.10`	`LokeshIndian`	`tanvalmg:I had installed TDM400P card but not on IBM server,,its better u check on digium site if that server is compatible with this card or not..as they mentioned compatible hardware there`
`14:37.58`	`*** join/#asterisk Teeli (n=Tili@cm109.gamma248.maxonline.com.sg)`
`14:39.49`	`*** join/#asterisk ToyMan (n=stuq@74-32-26-30.dsl1.mdl.ny.frontiernet.net)`
`14:40.37`	`vader--`	`hey i was wondering if anyone could take a look at my dialplan and see if you notice anything wrong with it`
`14:40.38`	`vader--`	`http://pastebin.ca/65132`
`14:41.29`	`*** join/#asterisk mhnoyes (n=mhnoyes@dialup-4.246.6.204.Dial1.SanJose1.Level3.net)`
`14:44.40`	`[TK]D-Fender`	`vader-- : Maybe you could be a bit more specific about what part isn't working to your satisfaction....`
`14:44.44`	`*** part/#asterisk mhnoyes (n=mhnoyes@dialup-4.246.6.204.Dial1.SanJose1.Level3.net)`
`14:45.09`	`[TK]D-Fender`	`vader-- : You local 7-digit dialing is broken....`
`14:45.18`	`*** join/#asterisk MikeJ__ (n=vircuser@d14-69-8-30.try.wideopenwest.com)`
`14:45.40`	`[TK]D-Fender`	`vader-- : Actually, almost your entire [outbound] context is broken...`
`14:46.05`	`*** part/#asterisk mog (i=ejabberd@68.62.237.103)`
`14:46.08`	`[TK]D-Fender`	`vader-- : I hope to hell you never have an emergency there either.`
`14:46.58`	`iq`	`yo`
`14:47.27`	`[TK]D-Fender`	`vader-- : You've got extra macros instead of smarter macros.... I guess I could go on....`
`14:47.49`	`[TK]D-Fender`	`vader-- : #`
`14:47.49`	`[TK]D-Fender`	`[macro-stdvm]`
`14:47.49`	`*** join/#asterisk beyond (n=beyond@200.192.160.100)`
`14:47.52`	`[TK]D-Fender`	`is broken`
`14:48.14`	`[TK]D-Fender`	`vader-- : Shall I simply draw my trout and prepare for the onslaught? :)`
`14:49.32`	`vader--`	`hehe`
`14:49.40`	`vader--`	`any advice to fix them?`
`14:49.42`	`Hmmhesays`	`wow did that sound bad`
`14:49.42`	`*** join/#asterisk tgrman (n=jcmoore@picard.ojc.nuvio.com)`
`14:49.58`	`[TK]D-Fender`	`vader-- : MASSIVE REWRITE.`
`14:50.16`	`Hmmhesays`	`cha ching`
`14:50.24`	`Ciber311`	`Hmmhesays: don't worry, [TK]D-Fender is always saying weird stuff :P`
`14:50.33`	`Hmmhesays`	`yes because I don't know him at all`
`14:51.22`	`Hmmhesays`	`da da da da da hey, working the kinks out of this asterisk/ldap/ser frankenstein of a system i've created`
`14:51.34`	`*** join/#asterisk hohum (n=dcorbe@12.195.58.234)`
`14:53.00`	`*** join/#asterisk MikeJ[Laptop] (n=vircuser@d14-69-8-30.try.wideopenwest.com)`
`14:59.00`	`*** join/#asterisk squinky86 (n=squinky8@gentoo/developer/squinky86)`
`15:01.10`	`Dr-Linux`	`question, how can i send dialed number in a variable with Dial or Goto application?`
`15:01.12`	`Dr-Linux`	`i wanna send dialed number in a variable to AGI script`
`15:02.25`	`*** join/#asterisk \|dennis\| (i=dennis@200.32.215.84)`
`15:05.41`	`*** join/#asterisk AlexCTI (n=alex@adsl-074-238-025-003.sip.mia.bellsouth.net)`
`15:07.28`	`AlexCTI`	`Hi everyone, there is someone familiar with handle queues?`
`15:07.37`	`*** join/#asterisk tdonahue (n=tdonahue@207.138.151.58)`
`15:08.33`	`*** join/#asterisk wunderkin (n=wunderki@69.26.192.234)`
`15:09.05`	`*** join/#asterisk jaike (n=a@203.115.188.120)`
`15:11.38`	`blaylock`	`has anyone upgraded since the security alert?`
`15:11.38`	`LokeshIndian`	`AlexCTI: yes, what is your problem ?`
`15:14.04`	`*** join/#asterisk pigpen2 (n=mark@70.232.183.131)`
`15:14.53`	`AlexCTI`	`LokeshIndian, I have set a queue, and when there isnot agents login in, it play msg, play annoucemnts and works fine the queue, so when the agents make login, the first incoming calls are send to the agents fine, but after few calls the time to get an agent turn long and the caller get silence`
`15:15.17`	`*** join/#asterisk MikeJ__ (n=vircuser@d14-69-8-30.try.wideopenwest.com)`
`15:15.25`	`[TK]D-Fender`	`Holy crap, LCD prices are dropping through the floor....`
`15:15.39`	`*** join/#asterisk Jamez^7 (n=martini@modemcable131.214-131-66.mc.videotron.ca)`
`15:15.41`	`Qwell`	`[TK]D-Fender: somebody mentioned a $149 19" lcd from tigerdirect yesterday`
`15:16.10`	`Qwell`	`[TK]D-Fender: What makes you say they're dropping?`
`15:16.12`	`[TK]D-Fender`	`My fav 19" widescreen wend from $250 to $210.....`
`15:16.21`	`Qwell`	`nice`
`15:16.35`	`[TK]D-Fender`	`Qwell : And I bought one at the start of the year for $350 (retail)`
`15:16.39`	`Qwell`	`heh`
`15:16.54`	`[TK]D-Fender`	`The 20" WS's are falling fast too... Acer is flooding the market.`
`15:16.58`	`LokeshIndian`	`AlexCTI: well i m running queues...but i m not logging agents...i dont have clue about your problem..sorry ask some one else`
`15:17.06`	`Qwell`	`[TK]D-Fender: benq?`
`15:17.18`	`[TK]D-Fender`	`Acer`
`15:17.24`	`Qwell`	`isn't acer benq?`
`15:17.35`	`[TK]D-Fender`	`Benq is decent stuff.... but Acer is the uber-value king...`
`15:17.39`	`*** join/#asterisk Assid (i=assid@203.115.83.214)`
`15:17.45`	`Qwell`	`So, they compete with...themselves? heh`
`15:17.46`	`[TK]D-Fender`	`Not IIRC....`
`15:17.55`	`Qwell`	`pretty sure it is`
`15:18.01`	`AlexCTI`	`LokeshIndian, How do you put your agents on the queue?`
`15:18.04`	`[TK]D-Fender`	`trying to remember who they bought out..`
`15:18.23`	`Qwell`	`http://global.acer.com/about/news.asp?id=59`
`15:18.25`	`[TK]D-Fender`	`Was a company more known for scanners at the time...`
`15:18.40`	`Qwell`	`nobody`
`15:19.31`	`Assid`	`heya Qwell, [TK]D-Fender`
`15:19.35`	`Assid`	`how you guys doing`
`15:19.36`	`LokeshIndian`	`AlexCTI: i dont make them login in the queues .. i had defined them in the queues..they will get calls when there is a call in the respective queue.`
`15:19.38`	`[TK]D-Fender`	`Qwell : Well that doesn't leave much room for doubt does it? :)`
`15:19.46`	`Qwell`	`nope ;)`
`15:19.55`	`[TK]D-Fender`	`Qwell : But its Acer's branded models that show the big drop....`
`15:19.57`	`Qwell`	`but, I thought they bought somebody too`
`15:20.09`	`*** join/#asterisk h0 (n=h0@ool-44c69453.dyn.optonline.net)`
`15:20.20`	`[TK]D-Fender`	`Qwell : Its just been a log while and Benq never found a price-point to maintain my interest.`
`15:20.54`	`*** join/#asterisk denon (i=denon@synapse.subneural.net)`
`15:20.54`	`*** mode/#asterisk [+o denon] by ChanServ`
`15:21.48`	`[TK]D-Fender`	`Qwell : Got a friend of mine running quad-head who doesn't see the point of WS. For him it'd only be to rotate for price list reading..... kinda sad...`
`15:22.18`	`[TK]D-Fender`	`I find it great for expanding the center area of web pages that are constantly straddled with side-bars.`
`15:22.29`	`[TK]D-Fender`	`Not that I don't occasionally nuke them with Firefox :)`
`15:23.37`	`CunningPike`	`Is bugs.dugium.com FUBAR?`
`15:24.05`	`file`	`at the moment? yes`
`15:24.53`	`[TK]D-Fender`	`Our bugs have bugs now? AIDS infects herpes, news at 11!`
`15:26.07`	`[TK]D-Fender`	`"This just in : AIDS & herpes have mutated and gone AIRBORNE!"`
`15:26.27`	`drray`	`airborn meaning the carriers can fly in airplanes`
`15:26.34`	`coppice`	`Qwell: are you thinking of Siemens mobile? Bbenq/Acer bought them. they bought someone else too`
`15:27.00`	`drray`	`our bugs are wireless`
`15:31.24`	`Qwell`	`coppice: That might be it`
`15:34.09`	`*** join/#asterisk ryguillian (n=ryan@205.234.239.193)`
`15:34.38`	`Qwell`	`grr...`
`15:34.44`	`Qwell`	`file: Get me a new desk`
`15:38.16`	`*** join/#asterisk liran_ (n=Coll@212.199.177.203.static.012.net.il)`
`15:39.43`	`*** join/#asterisk algorithmn (n=algorith@ool-45722b4c.dyn.optonline.net)`
`15:41.28`	`*** join/#asterisk clyrrad (n=ddd@CPE001195f553c7-CM0011aea484a4.cpe.net.cable.rogers.com)`
`15:41.44`	`*** join/#asterisk catlee (n=catlee@host66146143d.dsl.res.tor.fcibroadband.com)`
`15:41.49`	`catlee`	`Good morning`
`15:42.30`	`catlee`	`Our company's old phone system is slowly dying, today one of the (proprietary!) hard drives in the voice mail system seems to have died.`
`15:42.45`	`catlee`	`I'd like to replace the whole system with asterisk`
`15:42.58`	`LokeshIndian`	`catlee:good idea`
`15:43.01`	`*** join/#asterisk [Airwolf] (n=airwolf@83.98.235.220)`
`15:43.30`	`catlee`	`What is a realistic timeframe for an experienced system administrator to get the necessary hardware, install, configure and test asterisk, and make it live?`
`15:43.48`	`LokeshIndian`	`catlee:1 day`
`15:43.57`	`[TK]D-Fender`	`catlee : Depends on the size oand complexity.`
`15:44.03`	`clyrrad`	`Is anyone here farmiliar with Astertest? - Specifically compiling it?`
`15:44.05`	`catlee`	`Relatively small office - 30 people`
`15:44.21`	`[TK]D-Fender`	`catlee : Basic VM / IVR / ect?`
`15:44.22`	`Juggie`	`catlee, an afternoon easily.`
`15:44.28`	`Juggie`	`if its just extensions`
`15:44.41`	`[TK]D-Fender`	`catlee : Yeah, 1 day and you're ready....`
`15:44.44`	`catlee`	`Yeah, basic voicemail, extensions`
`15:44.46`	`catlee`	`What's IVR?`
`15:44.56`	`[TK]D-Fender`	`catlee : Interactive Voice Response`
`15:45.06`	`[TK]D-Fender`	`catlee : As in "auto-attendant"`
`15:45.07`	`*** join/#asterisk RaYmAn-Bx (i=rayman@kbhn-vbrg-sr0-vl201-020.perspektivbredband.net)`
`15:45.08`	`clyrrad`	`Yep.... lets you talk to the phone system`
`15:45.11`	`catlee`	`ah, ok`
`15:45.14`	`Ciber311`	`just remember to keep backups :P`
`15:45.23`	`Ciber311`	`otherwise the sales people will hang you ;)`
`15:45.23`	`catlee`	`yeah, that would be nice, but not required to start`
`15:45.34`	`[TK]D-Fender`	`catlee : Its pretty mucha given... east stuff...`
`15:46.08`	`clyrrad`	`Can somone give me a quick hand with Astertest?`
`15:46.17`	`catlee`	`I was trying to set up asterisk yesterday for SIP, but wasn't having too much luck...although that could have been the clients I was trying`
`15:47.21`	`LokeshIndian`	`catlee:before stting it up read about it ...from various sites and a book is also available from Oreilly`
`15:47.41`	`catlee`	`yeah, I'm partway through that now`
`15:48.18`	`Ciber311`	`man, everyone and their uncle is pimping that book out :P`
`15:49.15`	`*** join/#asterisk Heimidal (n=Heimidal@phpbb/styles/heimidal)`
`15:49.22`	`clyrrad`	`hrm..... guess no one has used Astertest before? I want to put a stress test on my server - I am having trouble to get it to compile using the instructions from the site. I have asterisk complied and installed with out issue. But when I modify the Makefile per the instructions I get the following error - ../include/asterisk/file.h:27:2: #error You must include stdio.h before file.h!`
`15:49.39`	`Heimidal`	`can anyone help me with setting up Music on Hold? It won't play the preinstalled MP3s as far as I can tell`
`15:49.59`	`*** join/#asterisk Teeli (n=Tili@cm109.gamma248.maxonline.com.sg)`
`15:50.12`	`clyrrad`	`here is the whole error: http://pastebin.ca/65146`
`15:50.18`	`LokeshIndian`	`Heimidal:do u have mpg321 installed ?`
`15:50.52`	`clyrrad`	`Has anyone had this issue before?`
`15:50.54`	`Heimidal`	`LokeshIndian: hmm.. I thought it was something that was installed with Asterisk`
`15:51.53`	`LokeshIndian`	`Heimidal: no`
`15:52.06`	`tanvalmg`	`To anyone...what rack-unit server can you recommend for Asterisk with TDM400P card?`
`15:53.26`	`*** join/#asterisk SplasPood (n=jwb@206.252.198.101)`
`15:55.52`	`*** join/#asterisk FinboySlick (n=FinboySl@c207.134.243-64.clta.globetrotter.net)`
`15:56.04`	`*** join/#asterisk klasstek (n=nunyobiz@ip67-154-143-190.z143-154-67.customer.algx.net)`
`15:56.58`	`Juggie`	`anything with a full height pci slot? :)`
`15:57.04`	`FinboySlick`	`I have a simple one: How do I tell asterisk not to answer a specific zaptel channel?`
`15:57.30`	`FinboySlick`	`(I only want to use it for outgoing calls)`
`15:57.48`	`CunningPike`	`FinboySlick: Create separate groups in zapata.conf`
`15:58.11`	`*** join/#asterisk dsfr (n=dsfr@pdpc/sponsor/digium/dsfr)`
`15:58.29`	`*** join/#asterisk angler (n=angler@pdpc/sponsor/digium/angler)`
`15:58.30`	`CunningPike`	`FinboySlick: Oh, wait - scratch that`
`15:58.43`	`*** join/#asterisk ph\|ber (n=phiber@slackwaresupport.com)`
`15:58.50`	`FinboySlick`	`Actually, let me describe this better first.`
`15:58.59`	`CunningPike`	`:D`
`15:59.17`	`ph\|ber`	`hey guys and gals.. if my asterisk box is behind a linux firewall, what specific iptables rules do i need to add for outgoing iax or sip connections to my provider..`
`15:59.18`	`Juggie`	`FinboySlick, put the channels you want to answer in one context`
`15:59.24`	`Juggie`	`put the channels you dont want to answer in another context.`
`15:59.36`	`FinboySlick`	`I have a 6 port Sangoma A200D and 3 lines. I only want to answer port 1. I want to be able to dial out on port 1-3 (whichever isn't busy).`
`15:59.52`	`FinboySlick`	`Okie.`
`15:59.54`	`FinboySlick`	`I'll try that.`
`16:00.00`	`*** join/#asterisk Cresl1n (n=matt@gateway.digium.com)`
`16:00.12`	`zoa`	`hey ho creslin`
`16:00.13`	`Ciber311`	`ph\|ber: ph\|ber: SIP 5004-5082`
`16:00.13`	`Ciber311`	`RTP 10001-20000`
`16:00.14`	`Ciber311`	`IAX 4569`
`16:00.40`	`Juggie`	`eg, group=1 context=answer channels=>1-2 group=2 context=noanswer channels=>3-4`
`16:00.59`	`Juggie`	`obviously in [answer] you have exten=> whatever,1,Answer`
`16:01.20`	`Juggie`	`and in [noanswer] you can just do exten=> _X.,1,Noop(Ignoring call)`
`16:01.51`	`ph\|ber`	`Ciber311: so those need to be nat'ed to my * box.`
`16:02.20`	`Ciber311`	`yes`
`16:02.23`	`Juggie`	`i also assume, immediate=no`
`16:02.25`	`ph\|ber`	`k. thanks`
`16:02.27`	`Juggie`	`has to be set`
`16:02.32`	`Juggie`	`but thats default i believe.`
`16:02.39`	`Ciber311`	`don't forget to add "nat=yes" under general in your sip.conf`
`16:02.47`	`Heimidal`	`hmm... well, I got hold music working, but it's really jittery`
`16:02.56`	`Juggie`	`Heimidal, what client?`
`16:03.01`	`Juggie`	`what version of asterisk`
`16:03.55`	`Heimidal`	`how do I get the version?`
`16:04.01`	`Juggie`	`'show version'`
`16:04.03`	`Juggie`	`in the console`
`16:04.08`	`Juggie`	`what is your client`
`16:04.10`	`Heimidal`	`1.2.4`
`16:04.12`	`Juggie`	`a soft phone a hard phone?`
`16:04.15`	`Heimidal`	`hard`
`16:04.21`	`Juggie`	`first thing, thats old, upgrade it to 1.2.9.1`
`16:04.32`	`Heimidal`	`last time I upgraded, it broke a few things`
`16:04.44`	`Juggie`	`secondly, in your hard phone make sure VAD/Silence whatever they call it is off.`
`16:04.59`	`Juggie`	`eg, make sure the phone transmits silence.`
`16:05.24`	`*** join/#asterisk mog (i=ejabberd@68.62.237.103)`
`16:06.00`	`Juggie`	`what is probally happening is in asterisk 1.2.x asterisk is timeing off the incomming RTP stream, and if your phone isnt sending packets(because your not talking) then that would explain why its jittery`
`16:06.06`	`Juggie`	`this is fixed in 1.4 when it comes out.`
`16:06.16`	`Heimidal`	`ok`
`16:06.26`	`Juggie`	`if you talked or whistled into the phone or something`
`16:06.32`	`Juggie`	`you would probally fine the jitter would go away`
`16:06.36`	`Juggie`	`*find`
`16:07.07`	`*** join/#asterisk Vorondil (n=jkiffmey@miro.voltaiccommerce.com)`
`16:07.10`	`Heimidal`	`hmm`
`16:07.18`	`Heimidal`	`what is the easiest upgrade path?`
`16:07.35`	`Beirdo`	`hmm. wonder why my asterisk isn't responding to SIP`
`16:08.04`	`Hmmhesays`	`cause you changed the sip listening port`
`16:08.07`	`Hmmhesays`	`:D`
`16:08.07`	`Juggie`	`just compile and install 1.2.9.1 ontop of 1.2.4, it supports all the same config files etc.`
`16:08.14`	`Heimidal`	`ok`
`16:08.15`	`Beirdo`	`Hmmhesays, nope, but good thought :)`
`16:08.17`	`Juggie`	`should be no problem`
`16:08.18`	`ph\|ber`	`Ciber311: still doesnt work.. any ideas?? phone, here at my office, asterisk box, cross country, behind linux firewall.. phone registers, and i can see when i dial *97, no voice on my end.`
`16:08.25`	`*** join/#asterisk af_ (n=af@ip-164-240.sn2.eutelia.it)`
`16:08.32`	`Beirdo`	`is there a way to tell asterisk ONLY to bind to one interface?`
`16:08.41`	`Juggie`	`ph\|ber, asterisk is behind a firewall?`
`16:08.46`	`ph\|ber`	`yes`
`16:08.51`	`Juggie`	`set externip= in sip.conf`
`16:08.54`	`Juggie`	`tell it the real ip.`
`16:09.31`	`ph\|ber`	`it is set.`
`16:09.38`	`clyrrad`	`Do you guys prefer keeping your configs in a database or in files... is there really a big performance difference going the DB apporach?`
`16:09.49`	`Beirdo`	`hah, bindaddr= in sip.conf might be my key here`
`16:09.50`	`Juggie`	`nat=yes set for all the phones?`
`16:09.58`	`ph\|ber`	`the phone i am on.. yes`
`16:10.10`	`Juggie`	`the phones can hear * but * cant hear the phones?`
`16:10.51`	`ph\|ber`	`no, i cant hear the vm`
`16:11.00`	`[TK]D-Fender`	`clyrrad : Files is just fine for normal office PBX use. Its only when you scal up a LOT that it pays to split things up.`
`16:11.01`	`ph\|ber`	`but i see in my logs dialing *97`
`16:11.02`	`*** join/#asterisk KranZ (n=user@sme.bestline.net)`
`16:11.20`	`Juggie`	`ph\|ber, you have an rtp problem then`
`16:11.24`	`C4T3l`	`[TK]D-Fender: agreed!`
`16:11.26`	`*** join/#asterisk websae (n=websae@209-252-79-66.ip.mcleodusa.net)`
`16:11.32`	`Juggie`	`use 'rtp debug' on the server`
`16:11.38`	`Juggie`	`and see where the packets are going`
`16:11.46`	`Juggie`	`make sure linxu is letting them out, etc.`
`16:11.50`	`Juggie`	`*linux`
`16:11.55`	`ph\|ber`	`Sent RTP packet to 192.168.1.61:2224 (type 0, seq 27177, ts 4160, len 160)`
`16:12.01`	`clyrrad`	`clyrrad : Files is just fine for normal office PBX use. Its only when you scal up a LOT that it pays to split things up.`
`16:12.01`	`clyrrad`	`<ph\|ber> but i see in my logs dialing *97`
`16:12.01`	`clyrrad`	`* KranZ has joined #asterisk`
`16:12.01`	`clyrrad`	`<Juggie> ph\|ber, you have an rtp problem then`
`16:12.01`	`clyrrad`	`<C4T3l> [TK]D-Fender: agreed!`
`16:12.03`	`clyrrad`	`* websae has joined #asterisk`
`16:12.05`	`clyrrad`	`<Jugg`
`16:12.07`	`clyrrad`	`sorry`
`16:12.09`	`clyrrad`	`:(`
`16:12.11`	`clyrrad`	`my bad`
`16:12.13`	`clyrrad`	`didnt mean to do that`
`16:12.42`	`Juggie`	`ph\|ber, theres your problem`
`16:12.46`	`clyrrad`	`TK... Do you find its just as easy to do the configs in the DB or more of a hassle?`
`16:12.57`	`Juggie`	`if * is behind a firewall and the phone is on the internet`
`16:13.03`	`Juggie`	`then thats certainly the wrong ip`
`16:13.09`	`ph\|ber`	`ok..`
`16:13.17`	`[TK]D-Fender`	`clyrrad : Well I've never done it with DB, but they require setup.... files are more often than not a cut&paste job.....`
`16:13.21`	`Juggie`	`you dont have nat=yes set for that phone`
`16:13.24`	`ph\|ber`	`phone, behind linux router, * behind different linux router`
`16:13.29`	`*** join/#asterisk CoffeeIV (i=rgr@cpe-70-112-100-20.austin.res.rr.com)`
`16:13.33`	`[TK]D-Fender`	`clyrrad : if it was over 50 extens I might consider DB...`
`16:13.39`	`Juggie`	`and if you do then your linux packet forrward rule is broken`
`16:13.47`	`Juggie`	`because it should not change the source ip/port`
`16:13.49`	`[TK]D-Fender`	`clyrrad : Even then though....`
`16:13.50`	`clyrrad`	`TK- yes there will be more than 50`
`16:13.51`	`Juggie`	`well maybe port, but not the ip.`
`16:13.55`	`[TK]D-Fender`	`clyrrad : #?`
`16:14.11`	`*** join/#asterisk swytch (n=ezcall@LNeuilly-152-22-86-193.w193-251.abo.wanadoo.fr)`
`16:14.14`	`CoffeeIV`	`Can you use a voice modem as a trunk in asterisk, perhaps by hackishly wiring the mic/speaker to the sound card ?`
`16:14.21`	`clyrrad`	`Well I would say a few hundered at least... I dont know what this server can handle... I have been trying to Astertest on it`
`16:14.26`	`clyrrad`	`no luck getting it to compile yet`
`16:14.45`	`swytch`	`any who can tell me how to declare a user in sip.conf if i show them (pastebin) my sip INVITE ?`
`16:14.57`	`[TK]D-Fender`	`CoffeeIV : No, only 1 kind of specific modem is usable with *, the X100P (Intel 537)`
`16:15.05`	`Juggie`	`swytch, there are a number of samples in there already`
`16:15.20`	`Juggie`	`check your asterisk source/configs/sip.conf.sample`
`16:15.33`	`swytch`	`Juggie: the problem is someone cleaned them away..`
`16:15.36`	`[TK]D-Fender`	`CoffeeIV : and forget the idea of freakish patching of audio from any other device.....`
`16:15.47`	`swytch`	`Juggie: oh ill have a look 8-)`
`16:15.56`	`clyrrad`	`TK - did you see my previous message?`
`16:17.19`	`[TK]D-Fender`	`clyrrad : Few hunderd? eek.. yeah, DB starts looking appealing....`
`16:17.59`	`CoffeeIV`	`D-Fender: I have seen references on the web to something that hooks up asterisk to skype using some kind of freakish patching . . . if freakish patching is the only way I'll do it. How come someone hasn't written a driver for an RS-232 controlled dialer and acoustic coupler on sound card already ? :)`
`16:18.31`	`ph\|ber`	`ok. so i put my phone on a real ip.. same thing`
`16:18.32`	`clyrrad`	`TK - Yea thats what I am thinking too, it would be nice to know how much load this server can handle though, have you ever useed Astertest?`
`16:19.08`	`*** join/#asterisk Qwell[] (i=north@unaffiliated/qwell)`
`16:19.18`	`drray`	`a x100p card is $(`
`16:19.22`	`drray`	`er, 9`
`16:21.35`	`[TK]D-Fender`	`clyrrad : Nope... what are you planning on using for PSTN?`
`16:21.55`	`*** join/#asterisk nexstar (n=nexstar@adsl-67-112-181-25.dsl.lsan03.pacbell.net)`
`16:22.49`	`[TK]D-Fender`	`CoffeeIV : Here's a though : you can by usable stuff for far less effort than it takes to try and make garbage usable.....`
`16:22.53`	`swytch`	`Juggie: its for calls comming in from a GW on a known ip address with "From: <sip:493465574@1.2.3.4;user=phone>;tag=.." in the INVITE. and the example in sip.conf.sample (type=peer) doensnt work.`
`16:23.08`	`[TK]D-Fender`	`CoffeeIV : You don't spend days of programming to fix a $10 problem....`
`16:23.47`	`swytch`	`CoffeeIV: unless there are 1000 people having that $10 problem 8-)`
`16:24.09`	`iq`	`anyone streaming free football?`
`16:24.16`	`drray`	`it's his time to spend as he see fit`
`16:24.25`	`drray`	`and waste accordingly`
`16:24.26`	`[TK]D-Fender`	`swytch : You'd have to find a way to bill & collect from them.... and find a target product that 1000 people use :)`
`16:24.40`	`[TK]D-Fender`	`drray : Waste... indeed so.`
`16:25.08`	`drray`	`I was told by a boss that I was wasting my time, not buying another mitel for work`
`16:25.14`	`ph\|ber`	`Ciber311: any ideas?`
`16:25.41`	`[TK]D-Fender`	`drray : Yeah, but he's not qualified to say such things :) slight difference.`
`16:25.52`	`drray`	`heh`
`16:26.08`	`[TK]D-Fender`	`drray : Only industry I here of Mitel in is hospitality....`
`16:26.17`	`[TK]D-Fender`	`drray : What kind of setup do you have?`
`16:26.21`	`drray`	`we are a hotel`
`16:26.22`	`drray`	`:)`
`16:26.22`	`Hmmhesays`	`say what?`
`16:26.27`	`[TK]D-Fender`	`drray : :D`
`16:26.40`	`drray`	`his middle name is turnkey by the way`
`16:26.50`	`swytch`	`[TK]D-Fender: im beginning to think that way too. i have a damn $10 problem that i have to solve right now. with gw -> MERA -> Asterisk`
`16:27.01`	`[TK]D-Fender`	`drray : Mitel's middle name is "Ben Dover" :)`
`16:27.08`	`drray`	`yeah`
`16:27.21`	`Hmmhesays`	`we still sell old mitel smart-1 dialers here`
`16:27.25`	`[TK]D-Fender`	`drray : And lube will cost you extra`
`16:27.40`	`drray`	`lube is a special order product`
`16:27.42`	`[TK]D-Fender`	`Hmmhesays : And there are some 2 headed turtles..... you just don't see them much...`
`16:27.43`	`CoffeeIV`	`I'm looking more to see if someone else has already wasted the time, more than I am planning to hack it myself. How do the skype<->asterisk hacks out there work ?`
`16:27.48`	`drray`	`but since you need to be up today...`
`16:27.57`	`*** join/#asterisk trixter (n=trixter@65-165-167-217.du.volcano.net)`
`16:28.08`	`[TK]D-Fender`	`CoffeeIV : Everyone else has realized that their time was worth more than the 10$ too.... sorry...`
`16:28.19`	`trixter`	`http://www.trxtel.com/index.php?page=Asterisk_Bounty asterisk bounties are now doubled`
`16:28.23`	`Hmmhesays`	`CoffeeIV I have it running`
`16:28.48`	`CoffeeIV`	`Hmmhesays: the one that runs on windows and you hook it up to your * ?`
`16:28.54`	`Hmmhesays`	`yeah pretty much`
`16:29.04`	`Hmmhesays`	`it kind of sucks, but I don't have the time to port that over`
`16:29.26`	`Hmmhesays`	`a monkey could understand the skype api though`
`16:29.35`	`drray`	`I don't get why people use skype`
`16:29.36`	`Hmmhesays`	`all based on message passing`
`16:29.38`	`drray`	`over IAX`
`16:29.55`	`CoffeeIV`	`Hmmhesays: are physical wires involved, or is it all software ? I thought the skype API did not give you access to the audio stream`
`16:30.01`	`Hmmhesays`	`drray: because it is quick, easy and requires 0 knowledge of computers, its perfect for end lusers`
`16:30.15`	`mog`	`it does CoffeeIV but it creates a vaudio card`
`16:30.18`	`mog`	`its lame`
`16:30.27`	`drray`	`do we need to make a zero config iaxy client?`
`16:30.28`	`Hmmhesays`	`yeah`
`16:30.29`	`mog`	`its basically just a wrapper to script their gui`
`16:30.53`	`[TK]D-Fender`	`Skype is the P2P bastard child of the VoIP world.... it should be put down along with its overzealous techie-wanna-be promoters....`
`16:31.08`	`Hmmhesays`	`I disagree`
`16:31.33`	`Hmmhesays`	`skype is great for the people that make up the majority of computer users out there`
`16:31.34`	`CunningPike`	`[TK]D-Fender: Don't hold back - tell us how you really feel`
`16:31.54`	`coppice`	`Skype takes wideband seriously. skype takes encryption seriously. skype takes ease seriously. it has a lot going for it`
`16:31.58`	`[TK]D-Fender`	`CunningPike : :F`
`16:32.06`	`CunningPike`	`:D`
`16:32.20`	`*** join/#asterisk tRSS (n=tRSS@193.220.221.2)`
`16:32.32`	`*** join/#asterisk mountainm2k (n=mountain@cbit-98.bullseye9.com)`
`16:32.32`	`tRSS`	`hey everyone`
`16:32.36`	`tRSS`	`i am back`
`16:32.43`	`Hmmhesays`	`when I want to see my gf's tits without driving halfway across town, skype it is`
`16:32.44`	`[TK]D-Fender`	`coppice : but it fails on infrastructure integration and openness.`
`16:33.18`	`[TK]D-Fender`	`Hmmhesays : Try to avoid mentioning women and vehicles in the same sentences, k? ;)`
`16:33.20`	`Vorondil`	`err, lmao`
`16:33.31`	`Vorondil`	`Hmmhesays: nice`
`16:33.32`	`mountainm2k`	`x86 -- TNX for pointing me toward iaxmodem / HylaFAX, much better solution I think... Just need to get the DID portion working...`
`16:33.43`	`CoffeeIV`	`skype has a dense enough encoding that it sounds ok over dialup -- that's the main technical feature I think`
`16:33.44`	`mountainm2k`	`(which is tough since I don't have DID's yet)`
`16:33.45`	`Hmmhesays`	`[TK]D-Fender: when I want to see my gf's tits without WALKING halfway across town then`
`16:34.04`	`tRSS`	`my asterisk won't load at boot time. i did 'make config' in the asterisk source directory. i am able to run it successfully manually (by doing /etc/init.d/asterisk start). any help would be much appreciated.`
`16:34.04`	`[TK]D-Fender`	`Hmmhesays : Ekiga for the win! ;)`
`16:34.05`	`drray`	`amazing how far you will walk with an erection`
`16:34.22`	`*** part/#asterisk trixter (n=trixter@65-165-167-217.du.volcano.net)`
`16:34.25`	`Hmmhesays`	`about 3 feet`
`16:34.32`	`drray`	`30 times?`
`16:34.42`	`C4T3l`	`tRSS: what distro are u using???`
`16:34.43`	`coppice`	`i give skype good marks for not being in a race to the bottom like most other voip`
`16:34.47`	`tRSS`	`FC4`
`16:34.59`	`*** part/#asterisk opc0de (n=adam@CPE006008148866-CM000f9fa8c50a.cpe.net.cable.rogers.com)`
`16:35.12`	`Hmmhesays`	`I agree on the infrastructure integration and open-ness`
`16:35.19`	`[TK]D-Fender`	`coppice : They know that slow and steady is the way to go, just like SCO ;)`
`16:35.26`	`C4T3l`	`tRSS: look at chkconfig --list asterisk and see what the output says`
`16:35.38`	`Hmmhesays`	`but it excels where most other voip software fails, easy of use to the monkeys`
`16:35.39`	`[TK]D-Fender`	`<- Pulls no punches...`
`16:35.53`	`*** join/#asterisk jtodd (n=jtodd@reserve-64-79-115-18.wiline.com)`
`16:35.58`	`[TK]D-Fender`	`Hmmhesays : And Monkeys is what made Windows an empire....`
`16:36.08`	`coppice`	`well it seems everyone else can wait to get there. sod the quality, its IP :-)`
`16:36.21`	`drray`	`kingdom of the blind the one eyed monkey is king`
`16:36.28`	`tRSS`	`C4T3l: i am getting this: 'service asterisk supports chkconfig, but is not referenced in any runlevel (run 'chkconfig --add asterisk')'`
`16:36.30`	`[TK]D-Fender`	`So much for the technological and intellectual liberation of the world....`
`16:37.14`	`C4T3l`	`tRSS: wierd, run 'chkconfig --add asterisk'`
`16:37.15`	`tRSS`	`C4T3l: I can see asterisk starting but then it crashes and tries to restart automatically where it fails. I have to kill all the processes and start it manaully and then it works. but this defies the whole purpose`
`16:37.21`	`*** join/#asterisk rene- (n=rene-@dsl-200-67-175-250.prod-empresarial.com.mx)`
`16:37.25`	`[TK]D-Fender`	`Thats the problem with technology... we let monkeys use it and influence its direction. I say a little benevolent dictatorship is in order...`
`16:37.42`	`C4T3l`	`tRSS: ohhh, do a ps -ef \| grep asterisk`
`16:38.26`	`*** join/#asterisk dsfr (n=dsfr@pdpc/sponsor/digium/dsfr)`
`16:38.39`	`tRSS`	`C4T3l: well it is not running at the moment. like I said above, it tries to load, but fails. I have to kill the unsuccessful processes and start it manually`
`16:38.42`	`Hmmhesays`	`[TK]D-Fender: this is true`
`16:38.50`	`Hmmhesays`	`but ms has brought us some good things`
`16:38.57`	`Hmmhesays`	`my pc wouldn't be the gaming platform it is without windoze`
`16:39.06`	`catlee`	`Ok, I think I have a somewhat working asterisk setup...I have ekiga connected to asterisk, and I set up 611 to dial Echo()`
`16:39.18`	`[TK]D-Fender`	`Hmmhesays : True, but these prices I would gladly pay, and more.`
`16:39.21`	`rene-`	`hello, i have two asterisk boxen, box 1 linked to box 2 over IAX, how do i make box 1 to play fax sounds so it triggers spandsp or nvfaxdetect fax detection in boxen2 (the one that originates)`
`16:39.32`	`catlee`	`When I dial 611 on ekiga, I see the call on the asterisk console, but ekiga doesn't seem to connect`
`16:39.50`	`rene-`	`i would also like to test for disconnected, busy, and answering machine signals in this simulation`
`16:40.00`	`[TK]D-Fender`	`catlee : Turn on "sip debug" and pastebin your attempted call`
`16:40.02`	`[TK]D-Fender`	`~pb`
`16:40.03`	`jbot`	`hmm... pb is a place to paste your stuff without flooding the channel - try http://pastebin.com/, or http://pastebin.ca, or http://channels.debian.net/paste, or for #oe use http://oe.pastebin.com, or http://bzflag.pastebin.ca/`
`16:40.07`	`*** join/#asterisk \|dennis\| (i=dennis@200.32.215.84)`
`16:40.13`	`[TK]D-Fender`	`full CLI output.`
`16:40.24`	`Hmmhesays`	`all the multimedia stuff windows brought about, i don't know if i'd give that up`
`16:40.27`	`[TK]D-Fender`	`Yes... it WILL take pages most likely.`
`16:40.34`	`tRSS`	`C4T3l: i am not sure, what I am missing here. I have another FC3 machine with the exact same setup running smoothly. i just have to move this onto this machine now`
`16:40.37`	`catlee`	`ah, I see`
`16:40.43`	`*** join/#asterisk freebsd_fan (n=ebola@i-83-67-73-117.freedom2surf.net)`
`16:40.43`	`[TK]D-Fender`	`Hmmhesays : *nix has plenty and has for a long time now...`
`16:41.11`	`Hmmhesays`	`the catalyst was windows though`
`16:41.23`	`C4T3l`	`tRSS: all i can suggest is to try and re-compile.... are you using .rpms or source?`
`16:41.38`	`catlee`	`it's sending traffic back on a different UDP port`
`16:41.39`	`[TK]D-Fender`	`Hmmhesays : Somewhat... between that and MacOS which all found roots in X-Windows anyways....`
`16:41.52`	`[TK]D-Fender`	`catlee : Where is Ekiga relative to your * server?`
`16:41.58`	`tRSS`	`C4T3l: I am using source (never felt comfortable with rpms), and I have tried recompiling several time with the same outcome`
`16:42.00`	`tRSS`	`:(`
`16:42.05`	`catlee`	`through a VPN at this time`
`16:42.17`	`[TK]D-Fender`	`catlee : So "effectively" local?`
`16:42.27`	`catlee`	`yeah, but with lots of restricted ports`
`16:42.32`	`catlee`	`or, with few open ports`
`16:42.38`	`[TK]D-Fender`	`catlee : You need to open up 5060,10000-20000 UDP`
`16:42.42`	`C4T3l`	`tRSS: damn, do you have the newest * vers?`
`16:42.44`	`Hmmhesays`	`roots there, but X didn't get decent until windows could already be used for a pretty decent multimedia machine`
`16:42.46`	`catlee`	`5060 is ok`
`16:43.06`	`catlee`	`but asterisk is trying to send back to 5074 it looks like`
`16:43.15`	`[TK]D-Fender`	`Hmmhesays : Near enough to par, and who's to say how things might have evolved if it were the subject of more focus....`
`16:43.20`	`*** join/#asterisk Johnnie (n=jdlewis@pdpc/supporter/active/Johnnie)`
`16:43.24`	`rene-`	`box1 calls box2, IAX2, can i use steveu app txfax in box2 to trigger fax detection in box1`
`16:43.27`	`catlee`	`unless that's the source port from ekiga that initiated the connection`
`16:43.28`	`tRSS`	`C4T3l: yes, I downloaded like 2 days ago`
`16:43.44`	`[TK]D-Fender`	`catlee : The return port is OK.... just pastebin what was requested...`
`16:43.57`	`Hmmhesays`	`[TK]D-Fender: i'll give you that`
`16:45.55`	`*** join/#asterisk rikstah (n=rick@87.113.88.49.bbplus.pte-ag2.dyn.plus.net)`
`16:46.09`	`rene-`	`question2, the manager event originate action has a Async parameter, what does it do?`
`16:46.21`	`C4T3l`	`tRSS: did you get any strange compile-time errors?`
`16:46.30`	`Juggie`	`it allows you to issue more manager commands before the event returns from the originate.`
`16:46.38`	`Juggie`	`exactally what async suggests.`
`16:46.41`	`rikstah`	`Can anyone tell me a web based interface to use in conjunction with RealTime's mysql extensions (so i can add remove easily, rather than use phpmyadmin)`
`16:46.43`	`*** join/#asterisk littlejohn (n=little@host144-73.pool877.interbusiness.it)`
`16:46.47`	`C4T3l`	`tRSS: what kernel vers are you running?`
`16:46.50`	`tRSS`	`C4T3I: nope, and this is why i am so lost.`
`16:47.33`	`nexstar`	`i installed tftp on cent os, how do i set that up?`
`16:47.43`	`tRSS`	`how do I check my kernel version?`
`16:47.53`	`rikstah`	`tRSS, uname -a`
`16:48.01`	`rene-`	`Juggie: thx`
`16:48.17`	`tRSS`	`C4T3l: 2.6.11-1`
`16:48.42`	`tRSS`	`thanks rikstah`
`16:48.45`	`Nugget`	`I'm running version 6.1!`
`16:49.57`	`rene-`	`rikstah: build your own, if you used rails, the scaffolding feature would build a gui for your schema with no effort, you just need to add an id int auto_incrementing column to the schema and make a quick fix because a column named 'type' as used by asterisk for peer`
`16:50.14`	`rene-`	`, friend, and users clash with a function in rails`
`16:50.23`	`*** join/#asterisk Skymarshal (n=Skymarsc@p54AF162B.dip0.t-ipconnect.de)`
`16:50.24`	`rikstah`	`yeah i'm planning to build one, just seeing if there was one already`
`16:50.29`	`C4T3l`	`tRSS: try and grab an older asterisk version like 1.2.7`
`16:50.44`	`*** join/#asterisk Strom_C (n=strom@gateway.digium.com)`
`16:50.51`	`rikstah`	`rene-, do you have any exisiting one?`
`16:50.57`	`rene-`	`but in the end it is a three line effort once you have set up your database and installed rails`
`16:51.23`	`rene-`	`the generated GUI wont be pretty but it will be fully functional`
`16:51.31`	`Skymarshal`	`Hi. I am trying to use IAXtel.com and get the following error:`
`16:51.32`	`rene-`	`and you can customize the layout afterwards`
`16:51.33`	`Skymarshal`	`chan_iax2.c:7438 socket_read: Registration of 'xxxxxx' rejected: 'Registration Refused' from: '69.73.19.178'`
`16:51.34`	`Skymarshal`	`I doublechecked the configuration and don't know what could it be. Any ideas?`
`16:52.13`	`rikstah`	`rene-, yeah, i envisioned creating something where you dont have to keep putting the same number in then the priority etc, maybe some nice ajax that takes all that hard work out of it`
`16:52.18`	`[TK]D-Fender`	`Skymarshal : pastebin your config.`
`16:52.22`	`rikstah`	`and something that can group and sort them`
`16:52.54`	`catlee`	`[TK]D-Fender: Yeah, it was just the ports that I needed to fix`
`16:53.56`	`rene-`	`rikstah: that would be cool`
`16:54.36`	`Skymarshal`	`[TK]D-Fender: http://pastebin.com/706837`
`16:54.59`	`*** part/#asterisk mog (i=ejabberd@68.62.237.103)`
`16:55.28`	`*** join/#asterisk pjz (n=pj@zachs.place.org)`
`16:55.33`	`pjz`	`howdy all`
`16:55.39`	`rene-`	`hi`
`16:55.52`	`pjz`	`I just got some enw polycom 501 phones in.. but htey're running bootrom 3.1.2.`
`16:55.56`	`pjz`	`all my older ones run 2.6.1`
`16:56.02`	`pjz`	`I know I can't downgrade`
`16:56.10`	`pjz`	`is it safe to upgrade everyone to 3.1.x?`
`16:56.21`	`Qwell[]`	`pjz: Is there a need to run 3.1.x?`
`16:56.24`	`pjz`	`is there a way to only run 3.1.x for those guys?`
`16:56.25`	`Qwell[]`	`If not...why?`
`16:56.32`	`pjz`	`Qwell[]: there's not`
`16:56.38`	`Qwell[]`	`Then just keep at 2.x.x`
`16:57.02`	`*** join/#asterisk MatsK (i=MatsK@83.233.97.229)`
`16:57.04`	`pjz`	`Qwell[]: but they're all centrally administered and boot via dhcp and then ftp their firmware`
`16:57.10`	`Qwell[]`	`ahh`
`16:57.16`	`[TK]D-Fender`	`pjz : No need, leave the BR alone unless you specifically need the new provisioning options. They both support All curent SIP application revisions which I WOULD suggest synchronizing on.`
`16:57.57`	`Qwell[]`	`pjz: You can't specify a firmware version, based on mac address?`
`16:57.59`	`[TK]D-Fender`	`pjz : Centrally upgrade them to the latest SIP release and don't put the BR in the provisioning folder.`
`16:58.02`	`tgrman`	`I upgraded >3000 IP30x and 50x phones to 3.1.2, no problems`
`16:58.25`	`[TK]D-Fender`	`Qwell : You can in the phones dedicated <mac>.cfg file.`
`16:58.32`	`Qwell[]`	`well then`
`16:58.40`	`[TK]D-Fender`	`Mine at home all run 3.1.3 and 2.0.0 Beta`
`16:59.34`	`pjz`	`what's the stable SIP app version ?`
`16:59.45`	`[TK]D-Fender`	`pjz : Currently SIP 1.6.6.`
`17:00.18`	`*** join/#asterisk jhiver (n=jhiver@LReunion-151-20-4.w193-253.abo.wanadoo.fr)`
`17:00.18`	`catlee`	`ok, one last quick question :)`
`17:00.29`	`[TK]D-Fender`	`catlee : Shoot`
`17:00.29`	`catlee`	`I run 'stop now' in the asterisk console`
`17:00.32`	`pjz`	`which I can get from where?`
`17:00.38`	`catlee`	`and nothing happens :)`
`17:00.44`	`catlee`	`except the load goes to 100%`
`17:00.49`	`pjz`	`I can only find 1.6.5 at freedomphones.net`
`17:01.01`	`*** join/#asterisk postel (n=jp@unaffiliated/postel)`
`17:01.12`	`catlee`	`I have to Ctrl-C to kill it`
`17:01.29`	`nexstar`	`quick question`
`17:01.57`	`nexstar`	`tftp uses your user name and password for the user your loged on as for the user and password for tftp right?`
`17:02.13`	`catlee`	`I have a feeling it's one of the modules, because if I disable autoload then stopping does work`
`17:02.16`	`[TK]D-Fender`	`pjz : contact your reseller, they should simply give it to you.`
`17:02.28`	`pjz`	`[TK]D-Fender: ah, okay`
`17:02.41`	`*** join/#asterisk mog (i=ejabberd@68.62.237.103)`
`17:03.26`	`catlee`	`I'm thinking I should just load the modules I need anyway though, right?`
`17:05.36`	`[TK]D-Fender`	`pjz : Just be warned that many things changes from 1.5.x to 1.6.x and that you are strongly advised to redo your configs ans not to screw them up from being able to start.`
`17:05.58`	`[TK]D-Fender`	`pjz : And a 2nd side note that you should just wait about 2 weeks anyways for the release of SIP 2.0 official :)`
`17:06.25`	`rene-`	`is it possible to use a local channel to generate from an asterisk system to another part of the dialplan, how?`
`17:06.54`	`pjz`	`[TK]D-Fender: oh, hrm`
`17:06.56`	`rene-`	`rephrasing: is it possible to use a local channel to generate a call from one part of the dial plan to another part of the dialplan?`
`17:07.04`	`[TK]D-Fender`	`rene- : Ummmm.... want to restructure that into something resembling a sentence?`
`17:07.41`	`[TK]D-Fender`	`rene- : Dial(Local/[exten]@[context])`
`17:08.09`	`rene-`	`[TK]D-Fender: heh sorry...`
`17:08.17`	`KranZ`	`poop`
`17:08.17`	`rene-`	`can i bridge two local channels?`
`17:08.52`	`[TK]D-Fender`	`rene- : Sure I guess.... in terms of onle local calling another...`
`17:09.00`	`rene-`	`yes`
`17:09.02`	`rene-`	`ok will try`
`17:09.07`	`[TK]D-Fender`	`but forcing a bridge would require real programming I'm sure...`
`17:09.22`	`pjz`	`[TK]D-Fender: actualy I'm running app v1.4.1`
`17:09.31`	`[TK]D-Fender`	`pjz : EEK....`
`17:09.48`	`pjz`	`[TK]D-Fender: enh, it works :P)`
`17:09.48`	`[TK]D-Fender`	`pjz : Ok, you'll need to rebuild your configs from scratch for sure.`
`17:10.04`	`pjz`	`[TK]D-Fender: can do that; I've got a script that generates them from templates`
`17:10.06`	`[TK]D-Fender`	`pjz : I'm sure it does... just means more work in converting. How many have you got?`
`17:10.24`	`pjz`	`[TK]D-Fender: around 3 dozen`
`17:10.43`	`[TK]D-Fender`	`pjz : Not so bad....`
`17:10.46`	`pjz`	`[TK]D-Fender: but like I said, I generate all the configs using a script and templates`
`17:11.19`	`[TK]D-Fender`	`pjz : I've got about the same here, but no script.... no need either.. I'm better off rebuilding my template which I can just cut & paste to anyways...`
`17:11.23`	`Skymarshal`	`I am trying to use IAXtel.com and get the following error:`
`17:11.25`	`Skymarshal`	`chan_iax2.c:7438 socket_read: Registration of 'xxxxxx' rejected: 'Registration Refused' from: '69.73.19.178'`
`17:11.26`	`Skymarshal`	`I doublechecked the configuration and don't know what could it be. Any ideas? http://pastebin.com/706837 (I x'ed the password and account data).`
`17:11.50`	`pjz`	`[TK]D-Fender: RGMUser("pj","510","Paul Jimenez",510,SoundPoint500('0004f201c26a'),cellphone='XXXXXXXXXX')`
`17:12.17`	`pjz`	`[TK]D-Fender: that's one extension definition in my script`
`17:12.32`	`[TK]D-Fender`	`pjz : Cool.`
`17:12.57`	`[TK]D-Fender`	`pjz : I could make a quickie-grep on myself if I truely cared, but whatever :)`
`17:13.39`	`pjz`	`[TK]D-Fender: well, having all the info in one place like that makes it easy to add more extension.. just cut/paste that line and edit it into the new user.`
`17:14.15`	`pjz`	`[TK]D-Fender: so should I really wait for 2.0 official?`
`17:14.28`	`pjz`	`[TK]D-Fender: also: where would I get docs for the config files for that?`
`17:17.21`	`pjz`	`[TK]D-Fender: I got my phones from voipsupply.com so 'ask my reseller' is kind of an obnoxious process`
`17:17.21`	`*** join/#asterisk mopri (n=jjohn@201.192.107.57)`
`17:17.24`	`*** join/#asterisk Falle (n=falle@falle.se)`
`17:21.04`	`*** part/#asterisk philippel (n=p_lindhe@c-24-19-186-72.hsd1.wa.comcast.net)`
`17:23.04`	`[TK]D-Fender`	`pjz : Yeah, I'd avise waiting jsut a little longer.`
`17:23.10`	`*** join/#asterisk eivindtr (n=wingnut-@062016174126.customer.alfanett.no)`
`17:23.16`	`[TK]D-Fender`	`pjz : Odds are the base config will last you several minor revisions...`
`17:23.45`	`[TK]D-Fender`	`pjz : Dunno.. they are normally pretty upfront about that sort of thing. Its all in how you ask :) They have an easy-access FTP from what I recall.`
`17:23.53`	`*** join/#asterisk DaPrivateer (n=matt7229@printserv.imbetterthanyou.com)`
`17:23.56`	`*** join/#asterisk NeonLevel (n=Miranda@201.155.235.92)`
`17:24.07`	`pjz`	`[TK]D-Fender: ah, okay`
`17:24.09`	`eivindtr`	`Does anyone else have problems with svn.digium.com right now?`
`17:26.01`	`*** part/#asterisk mog (i=ejabberd@68.62.237.103)`
`17:26.25`	`nexstar`	`how do i restart eth card to grab new ip address`
`17:26.32`	`nexstar`	`ifdown and ifup doesent reset it`
`17:27.11`	`eivindtr`	`You may have to delete some cache in the dhcp-server..`
`17:27.32`	`nexstar`	`no no, i can restart the computer and it grabs the new ip`
`17:27.34`	`LokeshIndian`	`nexstar: service network restart`
`17:28.48`	`nexstar`	`ah, i know why it wasent working, i was using eth1, not eth0`
`17:28.50`	`nexstar`	`errr`
`17:28.55`	`*** join/#asterisk dwmw2_gone (n=dwmw2@baythorne.infradead.org)`
`17:29.08`	`tanvalmg`	`forgive my question...how do i check if the motherboard is PCI 2.2 compliant?`
`17:29.27`	`*** join/#asterisk malcolmd (n=malcolmd@pdpc/sponsor/digium/malcolmd)`
`17:31.22`	`nexstar`	`i have port 21 forwarded to the voip box and need a ftp-server to run on it... tftp doesent use the same port right? what is a ftp-server program that i can use?`
`17:31.31`	`*** join/#asterisk mog (i=ejabberd@68.62.237.103)`
`17:31.37`	`[TK]D-Fender`	`tanvalmg : Read the manual/specsheets/etc`
`17:31.56`	`eivindtr`	`Does anyone else have problems with svn.digium.com right now? Can someone try svn checkout http://svn.digium.com/svn/asterisk/trunk zaptel?`
`17:31.57`	`[TK]D-Fender`	`nexstar : ProFTPD. very common.`
`17:32.34`	`nexstar`	`and i can yum install that?`
`17:33.38`	`[TK]D-Fender`	`nexstar : very likely.`
`17:33.52`	`*** join/#asterisk paolob (n=donpaolo@pri-214-b7.codetel.net.do)`
`17:33.59`	`nexstar`	`now say i install that server while loged in as user1, does the ftpserver use the person im loged on as for the username and password?`
`17:35.31`	`nexstar`	`yum can only find vsftpd`
`17:37.01`	`*** join/#asterisk michael-i (n=michael@141.41.38.58)`
`17:37.28`	`michael-i`	`does anyone happen to have astmanproxy-1.13-20051224-1315.tgz ?? their server's down...`
`17:37.47`	`tanvalmg`	`D-Fender : what directory is it under?`
`17:37.50`	`[TK]D-Fender`	`nexstar : Not a clue from there....`
`17:38.03`	`nexstar`	`k`
`17:38.06`	`nexstar`	`i think i got it`
`17:38.42`	`[TK]D-Fender`	`tanvalmg : What do you mean directory? It means go read the documentation thats available for your board! Be it a book, downloeded specs from the manufacturer, etc.`
`17:39.07`	`*** join/#asterisk jeffgus (n=jeffgus@greengables.zimage.com)`
`17:39.27`	`unixgeek`	`eivindtr: I am able to do a svn checkout.`
`17:39.50`	`unixgeek`	`eivindtr: svn co http://svn.digium.com/svn/zaptel/trunk/`
`17:43.24`	`eivindtr`	`unixgeek: Thanks, but it didn't work for me... I'm not experienced with svn - maybe I need an upgrade or something...`
`17:43.33`	`*** join/#asterisk SwK[Work] (n=SwK@64.89.118.139)`
`17:44.04`	`[TK]D-Fender`	`Trunk... brave people you are... the problem I find with bleeding edge is... all the blood :)`
`17:44.21`	`*** part/#asterisk ph\|ber (n=phiber@slackwaresupport.com)`
`17:44.31`	`Qwell[]`	`[TK]D-Fender: That "bleeding edge" is gonna be 1.4 soon :P`
`17:44.49`	`Qwell[]`	`the more people testing it right now, the better`
`17:45.48`	`jaike`	`help please. when`
`17:46.19`	`[TK]D-Fender`	`Talks does funny Yoda, hmmmmmmm`
`17:48.00`	`rene-`	`heh`
`17:48.24`	`*** part/#asterisk mog (i=ejabberd@68.62.237.103)`
`17:48.48`	`[TK]D-Fender`	`Qwell : We all know the truth is that 1.4 is the Beta, and 1.4.1 is the release ;)`
`17:48.57`	`Qwell[]`	`[TK]D-Fender: something like that :P`
`17:49.20`	`[TK]D-Fender`	`1.4.8.6.7.5.3.0.9!`
`17:49.50`	`*** join/#asterisk Strom_C (n=strom@gateway.digium.com)`
`17:51.43`	`rene-`	`i am trying to do predictive dialing, using the manager api, outbounds calls get connected and then i transfer the call to asterisk queue so it gets distributed between agents, the callee will hear dead air while the call is connected to a real agent, lets say 3-5 seconds when they are available agents, what approaches has been taken to this problem?`
`17:51.50`	`*** join/#asterisk InfraRed (n=subhi@arpa-addr.in)`
`17:51.53`	`InfraRed`	`hi`
`17:51.54`	`rene-`	`s/they/there`
`17:52.12`	`InfraRed`	`do i need to edit extensions.conf to add voice ail ?`
`17:52.14`	`InfraRed`	`voicemail`
`17:52.16`	`Strom_C`	`rene-: add hold music to your queue`
`17:52.22`	`InfraRed`	`or just voicemail.conf and sip.conf`
`17:52.35`	`rene-`	`Strom_C: good one`
`17:54.30`	`[TK]D-Fender`	`InfraRed : Yes`
`17:54.34`	`*** join/#asterisk _CALLNET (n=charly@140.Red-217-125-115.staticIP.rima-tde.net)`
`17:54.58`	`*** join/#asterisk clive- (n=pirch@dsl-145-46-170.telkomadsl.co.za)`
`17:58.21`	`*** join/#asterisk harryvv (n=none@S010600a0c93f6f7e.vs.shawcable.net)`
`17:59.50`	`docelmo`	`man people get pissy when you suspend accounts..`
`17:59.52`	`SplasPood`	`rene-: why is that a good one?`
`18:00.08`	`SplasPood`	`oh.. I see`
`18:00.26`	`SplasPood`	`since yer initiating the calls, it'd be obnoxious to pick up your phone and hear music... or ringing for that matter`
`18:00.38`	`rene-`	`true, i have never experienced that`
`18:00.51`	`rene-`	`when telemarketers call they are online`
`18:00.54`	`SplasPood`	`what if you played some message before dropping em into the queue?`
`18:00.54`	`rene-`	`right awat`
`18:00.56`	`rene-`	`away`
`18:01.07`	`SplasPood`	`rene-: they're also prolly not using asterisk queues :P`
`18:01.10`	`*** join/#asterisk mog (i=ejabberd@68.62.237.103)`
`18:01.13`	`rene-`	`they would hangup`
`18:01.27`	`SplasPood`	`rene-: have you checked all the various timeout vars for the queue?`
`18:01.41`	`rene-`	`SplasPood: true, but then how to do acd in asterisk`
`18:01.47`	`SplasPood`	`I've never done what you're doing tho.. only the other way around`
`18:02.02`	`SplasPood`	`rene-: acd, at least afaik, implies distributing inbound calls`
`18:02.03`	`nexstar`	`ok, i have proftpd setup, where do i setup user name and password? or is that used off of the user im loged into the maching with`
`18:02.17`	`rene-`	`SplasPood: i am aware that i can skip a member if he doesnt respond in say 5 seconds to a connection attempt`
`18:02.25`	`InfraRed`	`[TK]D-Fender: found the syntax in the default extensions file`
`18:02.32`	`SplasPood`	`rene-: yea, timeout= in the queues.conf`
`18:02.37`	`InfraRed`	`but it's sending it to the wrong context`
`18:02.41`	`InfraRed`	`how can i fix that`
`18:02.41`	`SplasPood`	`rene-: it'll ring em for that long`
`18:03.37`	`rene-`	`and then onto the next member`
`18:03.37`	`SplasPood`	`yes, presuming it's a roundrobin`
`18:03.37`	`rene-`	`i am not sure i should be using queues for outbound`
`18:03.37`	`SplasPood`	`but see, thats why this isn't ideal`
`18:03.38`	`SplasPood`	`you want to pick an agent`
`18:03.38`	`InfraRed`	`<PROTECTED>`
`18:03.38`	`SplasPood`	`THEN connect a call to them`
`18:03.38`	`InfraRed`	`Jun 13 19:00:58 NOTICE[15205]: chan_local.c:494 local_alloc: No such extension/context 501@internal creating local channel`
`18:03.39`	`SplasPood`	`you don't want to be making calls when your agents aren't avail`
`18:03.39`	`InfraRed`	`instead of 501@voice-mail`
`18:03.40`	`clive-`	`does anyone know how sensative iax2 trunking is to not-so-perfect zttest scores ?`
`18:04.02`	`SplasPood`	`rene-: never used it, but there's this VICDIAL thing.. might wanna take a look`
`18:04.17`	`InfraRed`	`[TK]D-Fender: i have mailbox=501@voice-mail`
`18:04.20`	`InfraRed`	`in sip.conf`
`18:04.21`	`rene-`	`true, thats why members on the queue are online, arent in pause, and have been responding to calls in less time than timeout`
`18:04.24`	`InfraRed`	`under the right extensions`
`18:04.53`	`rene-`	`that are the advantages of using queues, as opposed to sent connection attempts directly to agents or to devices`
`18:04.56`	`SplasPood`	`rene-: if they were paused the calls would skip em`
`18:05.12`	`SplasPood`	`rene-: what are the advantages?`
`18:05.17`	`[TK]D-Fender`	`InfraRed : ...? Just change them as appropriate...`
`18:05.18`	`eivindtr`	`unixgeek: The svn problem -> I was behind a proxy... duh!`
`18:05.37`	`unixgeek`	`eivindtr: that would explain it..... :-)`
`18:05.53`	`InfraRed`	`should voicemail and extensions be in the same xontext?`
`18:05.55`	`InfraRed`	`context`
`18:06.15`	`[TK]D-Fender`	`rene- : Calculating avg/time to response, skills based routing, not having the system send 10 calls to the same person at a time, etc...`
`18:06.38`	`[TK]D-Fender`	`InfraRed : use your imagination and figure what belong with what....`
`18:06.38`	`SplasPood`	`[TK]D-Fender: was that directed to me?`
`18:06.52`	`InfraRed`	`;) ok`
`18:07.04`	`[TK]D-Fender`	`SplasPood : Possibly :) I"m getting dizzy...`
`18:08.05`	`rene-`	`I am fully aware of the advantages of DO using queues, i have found some downsides if we are initiating connections to PSTN first and then transfer to agents, and those are waiting times for agents between pickup`
`18:08.49`	`SplasPood`	`[TK]D-Fender: yea but for what he's doing.. spam calls... people need to have an agent as soon as they answer the phone.. not be dropped into a queue`
`18:09.05`	`SplasPood`	`[TK]D-Fender: what rene said :)`
`18:09.13`	`rene-`	`heh`
`18:09.57`	`[TK]D-Fender`	`rene- : Ah, outbound... welll the advantage IS still intelligent disribution and you SHOULD have an agent free and ready to answer IMMEDIATELY.`
`18:10.05`	`SplasPood`	`to be honest I found so many annoyances /w asterisk's queue setup that I just considered writing my own`
`18:10.09`	`*** join/#asterisk dlynes_office (n=dlynes@216.251.149.66)`
`18:10.23`	`[TK]D-Fender`	`SplasPood : Try ICD`
`18:10.30`	`dlynes_office`	`woah`
`18:10.30`	`SplasPood`	`[TK]D-Fender: ICD?`
`18:10.35`	`dlynes_office`	`working t.38???`
`18:10.39`	`SplasPood`	`dlynes_office: huh?!`
`18:11.00`	`dlynes_office`	`SplasPood: read the topic in #asterisk-dev`
`18:11.01`	`*** join/#asterisk pepsis_ (n=pepsi@cable-24-139-25-26.net.dyn.personainc.net)`
`18:11.24`	`rene-`	`ICD?`
`18:11.30`	`rene-`	`i recall reading about it`
`18:11.57`	`*** join/#asterisk Cresl1n (n=matt@gateway.digium.com)`
`18:12.51`	`SplasPood`	`dlynes_office: ok, got any more info?`
`18:13.04`	`dlynes_office`	`SplasPood: ask file...he set the topic :)`
`18:13.09`	`*** join/#asterisk justinu\|laptop (n=Justin@12.44.122.130)`
`18:13.13`	`SplasPood`	`rene-: http://www.voip-info.org/wiki-ICD`
`18:13.18`	`*** join/#asterisk MACscr (n=MACscr@66.73.154.70)`
`18:13.22`	`MACscr`	`hello everyone`
`18:14.11`	`justinu\|laptop`	`~seen sevard`
`18:14.15`	`jbot`	`sevard is currently on #asterisk. Has said a total of 388 messages. Is idling for 1d 1h 27m 30s, last said: 'die?'.`
`18:14.52`	`dlynes_office`	`justinu\|laptop: this time i put the cd in my car, instead of the van`
`18:15.00`	`dlynes_office`	`justinu\|laptop: hopefully i remember tonight :p`
`18:15.09`	`SplasPood`	`[TK]D-Fender: this ICD looks interesting, but seems its all OpenPBX now?`
`18:15.25`	`*** join/#asterisk feld_ (n=feld@12.148.212.157)`
`18:15.33`	`dlynes_office`	`SplasPood: openpbx is a fork of asterisk, so it'll probably work in asterisk as well`
`18:15.48`	`justinu\|laptop`	`dlynes_office: killer! :)`
`18:16.01`	`SplasPood`	`dlynes_office: yea but for how long...`
`18:16.07`	`Beirdo`	`well, asterisk running on the vserver seems to be working just fine`
`18:16.08`	`Beirdo`	`heh`
`18:16.24`	`SplasPood`	`heh, i've got asterisk running in a parallels VM on my macbook pro`
`18:16.36`	`Beirdo`	`got a lot of reconfiguration to do, but the voice quality calling my wife was quite good`
`18:17.05`	`dlynes_office`	`so it didn't sound like screeching, crying eagles?`
`18:17.18`	`rene-`	`SplasPood, i have running asterisk natively in the Mac book :D`
`18:17.33`	`Beirdo`	`it sounded like a perfectly clear call`
`18:17.45`	`dlynes_office`	`Beirdo: then you haven't been married long enough yet :p`
`18:17.47`	`Beirdo`	`mind you, it was ulaw end to end, so it SHOULD sound perfectly clear`
`18:17.52`	`Beirdo`	`hahah`
`18:18.01`	`Beirdo`	`it hasn't even been a month yet :)`
`18:18.45`	`dlynes_office`	`give it time, give it time ;)`
`18:19.06`	`Beirdo`	`we'll see`
`18:19.38`	`Beirdo`	`and show translation has some real nice numbers :)`
`18:19.48`	`dlynes_office`	`?`
`18:20.12`	`[TK]D-Fender`	`dlynes_office : And today's progress report?`
`18:20.48`	`dlynes_office`	`working on it right now`
`18:22.29`	`*** join/#asterisk Jick (n=jicksta@66-100-35-23-static.dsl.oplink.net)`
`18:22.40`	`*** join/#asterisk MacWeenie (n=chatzill@82-35-73-28.cable.ubr02.dals.blueyonder.co.uk)`
`18:23.47`	`[TK]D-Fender`	`dlynes_office : What are your remaining issues?`
`18:24.13`	`dlynes_office`	`none, afaik....i'm working on getting it working on 2.6 right now`
`18:24.19`	`dlynes_office`	`after that's finished`
`18:24.29`	`dlynes_office`	`then i'll be getting the hwec to work`
`18:25.25`	`[TK]D-Fender`	`dlynes_office : Thats practically automatic. just use "echocancel=yes" and turn on 1 flag in wanpip1.conf`
`18:25.43`	`dlynes_office`	`yeah, but i still want ot test it anyways :P`
`18:25.57`	`[TK]D-Fender`	`Test = use = success :)`
`18:26.04`	`[TK]D-Fender`	`Same thing!`
`18:26.24`	`dlynes_office`	`Besides, i've got a whole crapload of things on my plate atm`
`18:26.47`	`*** join/#asterisk mcuk_storm (n=storm@neo.matrix-lan.net)`
`18:27.27`	`key2`	`[TK]D-Fender: do you know if call-limit still works in asterisk 1.2.58`
`18:27.29`	`key2`	`1.2.8`
`18:27.33`	`*** join/#asterisk Gamercjm (n=chris@pool-71-254-164-253.lsanca.fios.verizon.net)`
`18:28.19`	`dlynes_office`	`an asterisk box with x100p card and blacklisting, an asterisk box with sangoma a200 w/4 port fxo to replace nortel cics, an asterisk box with sangoma a200d w/4 port fxo to replace panasonic kx-tda30, an asterisk box with sangoma a200 w/2 port fxs/2 port fxo to test faxing, two asterisk boxes with sangoma a101s in them, set up with 10 g729's each`
`18:28.38`	`dlynes_office`	`and not to mention i need to finish off a billing system`
`18:28.48`	`dlynes_office`	`I wish I had more people working here`
`18:28.59`	`[TK]D-Fender`	`key2 : Don't know why not...`
`18:29.26`	`justinu\|laptop`	`dlynes_office: you need a few more asterisk machines to replace stuff`
`18:29.34`	`[TK]D-Fender`	`dlynes_office : For remote admin work, may rates are very accessable ;)`
`18:29.35`	`dlynes_office`	`and then plus my buddy wants me to go to the phillippines with him, too`
`18:29.39`	`dlynes_office`	`lol`
`18:29.39`	`Beirdo`	`sorry, had to go answer the door`
`18:29.53`	`*** join/#asterisk feld_ (n=feld@12.148.212.157)`
`18:29.58`	`Beirdo`	`the largest translation time shown on the vserver is 28ms`
`18:30.12`	`dlynes_office`	`justinu\|laptop: working capital is probably the biggest impediment atm :)`
`18:30.14`	`Beirdo`	`anything -> speex is 27 or 28ms`
`18:30.37`	`Beirdo`	`much much better than the anaemic celeron figures :)`
`18:30.53`	`Qwell[]`	`or the overpowered niagara figures`
`18:31.56`	`Beirdo`	`heh, haven't seen them, but niagara's meant to be more I/O than number-crunching, no?`
`18:32.02`	`Qwell[]`	`indeed`
`18:32.13`	`Qwell[]`	`speex <> ilbc == 1200ms ;)`
`18:32.20`	`Beirdo`	`holy crap`
`18:32.57`	`Beirdo`	`I think that machine would make a more convincing web server :)`
`18:33.09`	`Qwell[]`	`oh, no, it does great with asterisk`
`18:33.11`	`dlynes_office`	`or a firewall server :p`
`18:33.17`	`Qwell[]`	`dlynes_office: excessive!`
`18:33.17`	`Nivex`	`what is that, sending the packet out to vonage to be converted or something?!`
`18:33.33`	`Beirdo`	`does great for asterisk with no nasty translation, I guess`
`18:33.49`	`Qwell[]`	`Beirdo: yeah...or with a hardware transcoding solution`
`18:33.54`	`dlynes_office`	`Yeah...I get in the 50s for ilbc, myself`
`18:34.03`	`Qwell[]`	`dlynes_office: 50s?`
`18:34.06`	`dlynes_office`	`yeah`
`18:34.10`	`Qwell[]`	`50ms?`
`18:34.14`	`dlynes_office`	`correct`
`18:34.15`	`Beirdo`	`this AMD64 shows 12ms/13ms to ilbc`
`18:34.24`	`Qwell[]`	`dlynes_office: s == seconds :P`
`18:34.33`	`dlynes_office`	`no`
`18:34.36`	`Beirdo`	`the other columns are all < 5ms`
`18:34.42`	`dlynes_office`	`50s as in 50-59 ms`
`18:35.02`	`dlynes_office`	`some weird americans might write it as 50's`
`18:35.04`	`Nivex`	`50's`
`18:35.06`	`Qwell[]`	`heh`
`18:35.06`	`SplasPood`	`rene-: I run it in a VM because I like to break things :)`
`18:35.39`	`dlynes_office`	`and nivex proved my point :p`
`18:38.35`	`*** join/#asterisk PMantis (n=pmantis@cpe-66-66-115-197.rochester.res.rr.com)`
`18:39.32`	`PMantis`	`Hello, * 1.2.9.1 is not configuring my TDM400P correctly... here's my zapata.conf file and a CLI output...`
`18:39.32`	`PMantis`	`http://pastebin.com/707054`
`18:39.49`	`rene-`	`heh`
`18:40.43`	`PMantis`	`ztcfg -vvvvv shows the ports properly`
`18:40.51`	*** join/#asterisk Lino` (n=Lino@i577BCB34.versanet.de)
`18:41.48`	`*** join/#asterisk rogier (n=rogier@16-65-dsl.ipact.nl)`
`18:42.08`	`dlynes_office`	`PMantis: define "not configuring .... properly"`
`18:42.28`	`[TK]D-Fender`	`PMantis : And please shoe the zaptel.conf to match....`
`18:42.32`	`[TK]D-Fender`	`show*`
`18:43.02`	`dlynes_office`	`switchtype I think is for pri's, not analog lines`
`18:43.20`	`[TK]D-Fender`	`And you override your signalling all over the place. Tha file is a mess.`
`18:43.37`	`justinu\|laptop`	`dlynes, yeah switchtype sets the "pri profile"`
`18:43.46`	`[TK]D-Fender`	`Obvious AMP remements....`
`18:43.47`	`dlynes_office`	`PMantis: you should only override that which is not working with defaults`
`18:43.51`	`justinu\|laptop`	`if you call it "pri profile" the moron nortel techs at your telco will know what it means`
`18:44.03`	`dlynes_office`	`PMantis: don't override every possible thing you could find in the sample zapata.conf file`
`18:44.23`	`justinu\|laptop`	`actually, that wasn't quite fair... some of those nortel trained telco guys are pretty sharp, but they live in their own world`
`18:44.37`	`dlynes_office`	`PMantis: i'm guessing your zaptel.conf is just as much of a mess as zapata.conf`
`18:45.02`	`dlynes_office`	`justinu\|laptop: as do all the other legacy hardware bitches`
`18:45.16`	`justinu\|laptop`	`heh`
`18:45.31`	`justinu\|laptop`	`i finally had to learn some of their jargon just to get the job done`
`18:45.38`	`dlynes_office`	`heh`
`18:45.47`	`justinu\|laptop`	`i got a whole set of DMS manuals on CDROM`
`18:45.52`	`Strom_C`	`oooooo`
`18:45.58`	`justinu\|laptop`	`DMS500 translations guide is over 15,000 pages`
`18:45.59`	`PMantis`	`[TK]D-Fender, Yeah, the file was generated with "PhoneCall". I used the sample, and simply added "channel => x" lines... no go.`
`18:46.00`	`dlynes_office`	`so you know what a cics, mics, option11, startalk flash, and bcm all are now?`
`18:46.09`	`dlynes_office`	`dms500 is damned old too`
`18:46.13`	`justinu\|laptop`	`no, those are shitty edge devices`
`18:46.15`	`dlynes_office`	`don't even think it's still used :p`
`18:46.16`	`[TK]D-Fender`	`PMantis : Clean it up and show your zaptel.conf....`
`18:46.18`	`PMantis`	`[TK]D-Fender, dlynes_office, my zaptel.conf file is here: http://pastebin.com/707071`
`18:46.25`	`justinu\|laptop`	`DMS500 is still sitting in a lot of CLEC COs`
`18:46.34`	`justinu\|laptop`	`it's just a DMS100 and a DMS250 combined`
`18:46.34`	`Strom_C`	`dlynes_office: I know several companies that use DM5`
`18:46.40`	`dlynes_office`	`justinu\|laptop: it's an isdn switch, right?`
`18:46.44`	`justinu\|laptop`	`it can be`
`18:46.46`	`justinu\|laptop`	`if you buy DTCIs`
`18:46.48`	`dlynes_office`	`justinu\|laptop: for cdrs on isdn lines?`
`18:46.59`	`Strom_C`	`dlynes_office: TDM class 4/5 hybrid switch`
`18:47.03`	`justinu\|laptop`	`well, DMS100 is a class 5 end office switch`
`18:47.10`	`dlynes_office`	`PMantis: ummm...wtf?`
`18:47.18`	`dlynes_office`	`PMantis: you're mixing loop start with kewl start`
`18:47.19`	`justinu\|laptop`	`so it's not designed to do the kind of tandem routing that IXCs needed`
`18:47.34`	`dlynes_office`	`PMantis: you need to make up your mind which it is`
`18:47.47`	`PMantis`	`'scuse me?`
`18:48.05`	`dlynes_office`	`PMantis: in zaptel.conf you've defined all ports as being kewl start`
`18:48.22`	`PMantis`	`ztcfg output: http://pastebin.com/707077`
`18:48.38`	`dlynes_office`	`PMantis: in zapata.conf, you've got them defined as a combination of loop start and kewl start`
`18:48.41`	`justinu\|laptop`	`DMS500 can speak a lot of protocols, SS7, ISDN, GR303, all the analog variants, etc.`
`18:48.55`	`justinu\|laptop`	`probably even SIP and RTP if you pay them enough`
`18:49.19`	`dlynes_office`	`PMantis: ztcfg only reads zaptel.conf, it doesn't read zapata.conf; zapata.conf is for asterisk`
`18:49.26`	`PMantis`	`dlynes_office, Ahh, it placed "signalling" in there twice... once with ls, once with ks. ks was last.`
`18:49.30`	`dlynes_office`	`PMantis: your zaptel.conf seems to be fine`
`18:49.38`	`Strom_C`	`I know the DMS-10 can be converted to speak some kind of voip protocol with a module change; I'd imagine the rest of the DMS line can do something similar`
`18:49.47`	`dlynes_office`	`PMantis: "it placed ..."?`
`18:49.51`	`dlynes_office`	`PMantis: what's "it"?`
`18:49.54`	`PMantis`	`dlynes_office, Yes, I understand what zaptel.conf is for.`
`18:50.27`	`PMantis`	`dlynes_office, I know you just came into the conversation, but I said earlier that "PhoneCall" generated the zapata.conf.`
`18:50.39`	`*** join/#asterisk PakiPenguin (n=Junaid@linuxpakistan/admin/pakipenguin)`
`18:50.40`	`PMantis`	`dlynes_office, So, "it" = "PhoneCall"`
`18:50.40`	`PakiPenguin`	`hello`
`18:50.41`	`dlynes_office`	`ah...never heard of it`
`18:50.41`	`eivindtr`	`I'm trying to compile the most recent "trunk", but there seems to be a circular dependency between zaptel and libpri. Anyone experiencing the same? Any trick..?`
`18:50.52`	`dlynes_office`	`I've always manually editted my zapata.conf`
`18:51.22`	`PMantis`	`dlynes_office, Me, too... but I have to deploy this server for a client... and they will want to use a web interface....`
`18:51.28`	`PMantis`	`PhoneCall = http://www.vecsector.com/phonecall`
`18:51.40`	`dlynes_office`	`ah`
`18:51.49`	`Beirdo`	`OK, this is... screwy`
`18:51.51`	`Strom_C`	`I always strongly dicourage my clients from administering their own phone system unless they clearly understand exactly what they're doing`
`18:51.54`	`Beirdo`	`hmm`
`18:51.59`	`PMantis`	`Heh`
`18:52.08`	`dlynes_office`	`Strom_C: nah...encourage them to screw it up`
`18:52.14`	`dlynes_office`	`Strom_C: then you get paid more to fix it`
`18:52.26`	`PMantis`	`lol`
`18:52.31`	`Beirdo`	`my CDR shows a duration of: 2147483647s for a 2s call`
`18:52.38`	`justinu\|laptop`	`i always get the biggest fucktard clients`
`18:52.49`	`Beirdo`	`WTF did I do wrong now?!`
`18:52.49`	`dlynes_office`	`justinu\|laptop: i think everyone does :)`
`18:52.51`	`justinu\|laptop`	`last one left an insane string of messages on my cellphone while I was on my honeymoon`
`18:52.58`	`dlynes_office`	`Beirdo: which version are you using?`
`18:53.00`	`justinu\|laptop`	`all because he didn't pay his bill and SBC turned off his PRI`
`18:53.18`	`dlynes_office`	`hahaha`
`18:53.26`	`Beirdo`	`1.0.9-dfsg-1 (from ubuntu breezy)`
`18:53.28`	`Beirdo`	`it seems`
`18:53.32`	`dlynes_office`	`and he thought you had something to do with it?`
`18:53.40`	`Beirdo`	`jeez that's old, I thought I had newer`
`18:53.41`	`justinu\|laptop`	`well, he thought the asterisk machine needed to be reset`
`18:53.57`	`dlynes_office`	`Beirdo: try using a release of asterisk that was released in the last year?`
`18:53.59`	`justinu\|laptop`	`so just for kicks, I logged in and restarted zaptel/asterisk, and it still was down`
`18:54.20`	`Beirdo`	`heh, worth a try, but you'd THINK this should behave`
`18:54.21`	`Beirdo`	`heh`
`18:54.23`	`dlynes_office`	`Beirdo: that version is quite old`
`18:54.32`	`Beirdo`	`yeah, it is`
`18:54.47`	`dlynes_office`	`Beirdo: there was a bug similar to that in an older 1.2 version...it might have existed in 1.0.9, too`
`18:55.14`	`Beirdo`	`and it's on a 64-bit machine, so it's likely a 64-bit issue that has been fixed since`
`18:55.14`	`dlynes_office`	`Beirdo: after all, there's 1.0.9.1 and 1.0.9.2 and 1.0.10, and 1.0.11 too`
`18:55.19`	`*** join/#asterisk pengyong (n=lala@218.93.158.125)`
`18:55.19`	`justinu\|laptop`	`anyways, this guy had no contract or anything with me, and the last voicemail had something to do with calling the police and coming over to my house... at that point, i decided i'm not dealing with him anymore... ever`
`18:55.33`	`PMantis`	`dlynes_office, Ok, this is rediculous.. I copied the zapata.conf file from my working * machine.. and this thing doesn't like it... same error I pastebin'd before.`
`18:55.50`	`rene-`	`is it possible to run nvlinedetect and nvfaxdetect in a sequence to allow for filtering of all busy, disconnected and then fax signals?`
`18:55.56`	`dlynes_office`	`PMantis: did you edit the file under windows?`
`18:56.04`	`PMantis`	`ROFL`
`18:56.14`	`dlynes_office`	`i'm guessing that's a yes?`
`18:56.15`	`PMantis`	`No, I don't have a windoze mahcine here.`
`18:56.18`	`dlynes_office`	`oh`
`18:56.19`	`dlynes_office`	`heh`
`18:56.50`	`PMantis`	`well, except under vmware when I have to.`
`18:57.16`	`*** join/#asterisk gregj (n=gj@195.225.250.35)`
`18:57.24`	`Beirdo`	`well, I'll try upping it to 1.2.7 from ubuntu dapper`
`18:57.44`	`Beirdo`	`screw it, I'll upgrade the vserver to dapper completely :)`
`18:57.58`	`dlynes_office`	`Beirdo: upgrade to a non-buggy version`
`18:58.06`	`dlynes_office`	`Beirdo: upgrade to 1.2.9.2`
`18:58.17`	`dlynes_office`	`erm 1.2.9.1 i mean`
`18:58.25`	`Beirdo`	`hmmm.`
`18:58.29`	`PMantis`	`Ha, I was gonna say.......`
`18:58.41`	`dlynes_office`	`the 1 and the 2 are right beside each other :p`
`18:58.45`	`gregj`	`I just got reqies frm my boss that he wans me to setup asterisk with astbill probably, and outbound connecion using SIP (we already have provider)`
`18:58.53`	`gregj`	`now, can anyone point me to some howto ?`
`18:58.54`	`Beirdo`	`compiling it wasn't what I wanted to do today, but not a bad idea,I guess`
`18:59.01`	`gregj`	`I can't dig anything on google`
`18:59.11`	`dlynes_office`	`Beirdo: binary packages are bad mmmmmkay?`
`18:59.14`	`justinu\|laptop`	`~docs`
`18:59.16`	`jbot`	`docs is probably probably Documentation can be found at http://www.digium.com/index.php?menu=documentation or http://www.digium.com/handbook-draft.pdf or http://www.voip-info.org/wiki-Asterisk or http://www.asteriskdocs.org or http://www.oreilly.com/catalog/asterisk or http://www.asteriskguru.com, or http://www.astmasters.net/howtos.html`
`18:59.19`	`justinu\|laptop`	`~thebook`
`18:59.33`	`Beirdo`	`binary packages are good for those with limited time to admin too many machines :)`
`18:59.44`	`dlynes_office`	`Beirdo: yeah..compile from source`
`18:59.50`	`dlynes_office`	`Beirdo: and then make your binary package`
`18:59.51`	`gregj`	`cheers`
`18:59.52`	`justinu\|laptop`	`~book`
`18:59.53`	`jbot`	`well, book is a book called Asterisk: The Future of Telephony which is found at http://www.asteriskdocs.org/modules/tinycontent/index.php?id=11`
`18:59.54`	`dlynes_office`	`Beirdo: that you then deploy`
`19:00.17`	`justinu\|laptop`	`gregj: start with the "book" if you haven't already`
`19:00.20`	`Beirdo`	`I have one asterisk box, but several machines to keep up, but yeah, that would make sense`
`19:00.32`	`dlynes_office`	`Beirdo: that's what I do, anyways`
`19:00.41`	`Beirdo`	`sensible for sure.`
`19:00.43`	`dlynes_office`	`Beirdo: it's worked well for me, for both asterisk and kernel upgrades`
`19:01.03`	`Beirdo`	`well, until now, my asterisk box was on a gentoo machine, so I was always compiling`
`19:01.06`	`*** part/#asterisk mog (i=ejabberd@68.62.237.103)`
`19:01.14`	`dlynes_office`	`yeah...that would be very annoying`
`19:01.26`	`Beirdo`	`to say the least ;)`
`19:01.56`	`*** part/#asterisk pepsis_ (n=pepsi@cable-24-139-25-26.net.dyn.personainc.net)`
`19:02.29`	`*** join/#asterisk Jason99 (n=jason@jason.unitz.ca)`
`19:03.39`	`dlynes_office`	`good afternoon, jason`
`19:03.58`	`*** join/#asterisk mog (i=ejabberd@68.62.237.103)`
`19:04.11`	`Jason99`	`Hello`
`19:04.59`	`*** join/#asterisk \|dennis\| (i=dennis@200.32.215.84)`
`19:05.24`	`*** join/#asterisk \lart (i=nunya@neo.jasons.org)`
`19:05.59`	`\lart`	`good day all.. Considering 3 phones - Cisco 7960G, Aatra 480i or possibly a Snom 360. Anyone have thoughts/experiences pro & con on those stations? My big requirements are 2-4 lines on the station and a headset jack.`
`19:06.19`	`justinu\|laptop`	`you should include the polyocm ip601 in that list as well`
`19:06.51`	`\lart`	`justinu, ok, fair enough.. Polycom's are typically quite a bit more spendy, are they not?`
`19:07.32`	`justinu\|laptop`	`actually much cheaper than cisco 7960`
`19:07.51`	`justinu\|laptop`	`i've used all of them except the cisco`
`19:08.01`	`justinu\|laptop`	`i prefer the ip601 over the snom, or the aastra`
`19:08.35`	`*** join/#asterisk japerry (n=japerry@216.231.51.208)`
`19:08.48`	`\lart`	`really? Interesting.. I've never used a 7960 in a SIP setup, but have used them (as a user) on a CallManager setup, and thought it was a great phone.`
`19:08.56`	`japerry`	`heya. so question--what has changed with asterisk 1.2 regarding watching for busy signals?`
`19:08.56`	`dlynes_office`	`~lart \lart`
`19:09.28`	`japerry`	`going through manuals for the polycom phone don't seem to work, and sip show subscriptions doesn't show inuse lines either`
`19:10.28`	`dlynes_office`	`\lart: the astra 480i certainly isn't competitive with the 601`
`19:10.45`	`dlynes_office`	`\lart: erm aastra...but the 9133i is quite competitive, considering what it does`
`19:10.54`	`justinu\|laptop`	`7960 is a great phone`
`19:10.58`	`justinu\|laptop`	`it's just very expensive`
`19:11.04`	`dlynes_office`	`\lart: if you're comparing the 9133i against a polycom 501 that is`
`19:13.17`	`justinu\|laptop`	`i used to have a bunch of micropolis 4gig SCSIs`
`19:13.20`	`\lart`	`Price isn't as big of a concern, so long as it's not greater than $300 US, which is the price on the 7960G..`
`19:13.25`	`justinu\|laptop`	`those things were big, hot and loud`
`19:13.42`	`\lart`	`oh yeah they were. and mighty hefty.`
`19:13.47`	`*** join/#asterisk oej (n=oej@apollo.webway.se)`
`19:13.55`	`websae`	`<----- has great deal on phones :) hehehe`
`19:13.59`	`justinu\|laptop`	`i went to the micropolis fire sale in chatsworth when they stopped making drives`
`19:14.08`	`Juggie`	`i need to get my hand son a mitel 5340`
`19:14.46`	`justinu\|laptop`	`they had a lot of really neat equipment for developing and testing drives in their facility`
`19:15.02`	`Katty`	`just for the record, gmail on the blackberry is handy dandy`
`19:16.45`	`Beirdo`	`heya, Katty`
`19:17.10`	`*** join/#asterisk C4T3l (n=rcall01@216.54.143.2)`
`19:17.29`	`dlynes_office`	`yeah...micropolis scsi kicked ass, too`
`19:18.09`	`*** join/#asterisk mercestes (n=merceste@69.15.174.114)`
`19:18.59`	`[TK]D-Fender`	`\lart : Polycom = best value for a quality IP phone. In north America there is no reason not to go with them.`
`19:19.09`	`mountainm2k`	`I'd like to try out DID w/o paying for a PRI right off the bat, any recommendations on IAX2 providers that are somewhat inexpensive?`
`19:19.22`	*** join/#asterisk Lino` (n=Lino@i577BF4E9.versanet.de)
`19:19.25`	`Strom_C`	`\lart: I've used the Cisco and the Polycom, and I find the Cisco to be a lot less hassle to configure than the Polycom`
`19:19.48`	`nexstar`	`installed wu-ftpd.rpm and the only files it installed reside in /usr/doc`
`19:19.51`	`nexstar`	`why is that?`
`19:20.21`	`[TK]D-Fender`	`\lart : True that Cisco's file is a bit flatter, but no more or less function, except that Polycom adheres to the more common standdards and is noticably less expensive.`
`19:21.12`	`justinu\|laptop`	`polycom has more provisioning options... TFTP/FTP/HTTP/HTTPS`
`19:21.16`	`gregj`	`so, can asterisk store all accounts and settings in sql database ?`
`19:21.22`	`Strom_C`	`plus, I prefer the design of the Cisco handset and find that the Cisco keypad tends to be more reliable when dialing quickly`
`19:21.25`	`gregj`	`all docs are for text file configuration`
`19:21.29`	`justinu\|laptop`	`gregj: yes, that is called "realtime"`
`19:21.41`	`gregj`	`okay`
`19:21.50`	`gregj`	`I gues if I want astbill, I need mysql`
`19:22.19`	`clive-`	`any ideas what can cause an IVR to sound really bad ?`
`19:22.34`	`gregj`	`is there any particular doc/howto about that kinda setup ?`
`19:22.38`	`gregj`	`the book is nothing about it`
`19:22.43`	`justinu\|laptop`	`should be on the voip-info.org side, greg`
`19:22.44`	`[TK]D-Fender`	`\lart : Lets start further back a bit : Do you need/want PoE? What kind of call volume? Speakerphone?`
`19:22.46`	`justinu\|laptop`	`site`
`19:24.22`	`\lart`	`don't need PoE, speakerphone a must, it's my desk phone for my home office. Headset & speakerphone used often.`
`19:24.37`	`Strom_C`	`cisco and polycom both have excellent speakerphones`
`19:24.47`	`*** join/#asterisk geoffl (n=geoff@gjctech.plus.com)`
`19:25.27`	`[TK]D-Fender`	`\lart : IP501 is for you then.`
`19:25.53`	`\lart`	`the 501 has a headset jack?`
`19:26.20`	`Strom_C`	`either the 501 or the 7940; it comes down to your personal preference, and I like the 7940/7960`
`19:26.51`	`[TK]D-Fender`	`\lart : yup, RJ9.`
`19:27.18`	`\lart`	`Not a handset, a headset, like over the head, with microphone..`
`19:27.36`	`Strom_C`	`\lart: handset AND headset jacks`
`19:27.39`	`\lart`	`ah.`
`19:27.40`	`Strom_C`	`both are RJ9`
`19:27.49`	`[TK]D-Fender`	`\lart : Yes, RJ9 is a standard format, typically used with Plantronics headsets & Amps`
`19:28.06`	`*** join/#asterisk techie (n=gus@voipops.net)`
`19:28.14`	`justinu\|laptop`	`if you're comparing to cisco, why not the 601? more features, less money`
`19:28.28`	`\lart`	`RJ9 is a smaller Rj11/45 type jack, I'm looking for a 2.5/3.5mm jack for the headset...`
`19:28.44`	`Strom_C`	`\lart: you won't find that on any quality phone`
`19:28.44`	`[TK]D-Fender`	`justinu : Well we're aiming for his NEEDS, and the price diff to an IP501 is even more staggering :)`
`19:28.57`	`Strom_C`	`phono plugs are the domain of crappy consumer phones`
`19:29.04`	`*** part/#asterisk rene- (n=rene-@dsl-200-67-175-250.prod-empresarial.com.mx)`
`19:29.18`	`[TK]D-Fender`	`\lart : You won't find 2.5mm on a GOOD phone. You can get an RJ9-2.5mm adapter easily enough though.`
`19:29.55`	`Strom_C`	`[TK]D-Fender: do you have me on ignore or something? You seem to keep repeating everything I say :)`
`19:30.01`	`Nivex`	`for some reason I thought the headset/handset jack on phones was an RJ10`
`19:30.06`	`Nivex`	`too many RJ's :)`
`19:30.10`	`\lart`	`My old polycom desk phone (analog) had a 2.5mm jack on it. :)`
`19:30.19`	`\lart`	`soundpoint pro even.`
`19:30.48`	`justinu\|laptop`	`what's the diff between the rj9 and the 2.5mm jack? on requires an amp, the other doesn't?`
`19:30.55`	`Strom_C`	`rj9 is modular`
`19:31.00`	`Strom_C`	`2.5m is a phono plug`
`19:31.03`	`Qwell[]`	`Nivex: I don't know if its true for rj9 also, but you know the difference between rj11 and rj12, right?`
`19:31.04`	`\lart`	`Precisely - with the RJ9, you need an amp`
`19:31.08`	`tzanger`	`RJ9 will pull the phone off the desk before letting go, 2.5mm won't`
`19:31.34`	`tzanger`	`amp? wtf does that have to do with it?`
`19:31.38`	`[TK]D-Fender`	`Strom_C : Huh? What?! ;)`
`19:31.44`	`*** join/#asterisk oej (n=oej@apollo.webway.se)`
`19:31.51`	`tzanger`	`our nortel phones have rj9s that you can plug in to with a normla rj9 headset with no amp`
`19:31.53`	`justinu\|laptop`	`well, all those nice expensive plantronics headsets require some kind of "amp"`
`19:31.55`	`justinu\|laptop`	`with batteries`
`19:32.02`	`loonacy`	`Hey, i have an account that goes through a proxy server, i can register like "register=>username@hostname:password:authname@proxy" and incoming calls work fine, but I can't figure out how to get outgoing calls to work. http://pastebin.com/707174`
`19:32.28`	`\lart`	`sorry, i've just never seen a headset that's RJ9. Every headset I've ever seen is a 2.5 or 3.5mm jack`
`19:32.36`	`[TK]D-Fender`	`\lart : No, you can get a straight RJ9-2.5mm adapter cable. I've seen them, and plantronics has those...`
`19:32.42`	`*** join/#asterisk Strom_C (n=strom@gateway.digium.com)`
`19:32.51`	`Strom_C`	`dammit, screen keeps flaking out on me`
`19:33.06`	`Nivex`	`www.ciscoheadsetadapter.com`
`19:33.19`	`[TK]D-Fender`	`justinu\|laptop : And you don't NEED an amp at all times, its just highly recommended. And having tried all kinds of phones & headsets, its worth it...`
`19:34.12`	`[TK]D-Fender`	`justinu\|laptop : Just FYI... the plantronics AMps can be powered off Polycom power bricks ;) Utter hilarity since I've got my 600's on PoE and TONS of extras`
`19:34.28`	`[TK]D-Fender`	`Nivex : Thats one place I found a year ago...`
`19:35.18`	`Nivex`	`[TK]D-Fender: yeah, I've known about it for awhile... I've just been waiting to see if anyone has ever actually ordered from them with success.`
`19:35.18`	`justinu\|laptop`	`d-fender: interesting`
`19:35.47`	`[TK]D-Fender`	`justinu\|laptop : I thought so :)`
`19:36.14`	`[TK]D-Fender`	`Nivex : I've tried un-amp'd headsets off RJ9 though... unappealing... it makes such a HUGE difference...`
`19:36.25`	`[TK]D-Fender`	`Nivex : I bought top-line stuff for my CSR's....`
`19:37.04`	`Nivex`	`I built my own headset adapter, and it did work. unfortunately I can't solder worth a sh*t and the thing broke after a week`
`19:37.06`	`[TK]D-Fender`	`Plantronics H261P headsets on M12 amps....`
`19:37.10`	`*** join/#asterisk oej (n=oej@apollo.webway.se)`
`19:37.53`	`*** join/#asterisk gr0mit_home (n=Tim@extrt.txrx.org.uk)`
`19:38.16`	`\lart`	`so it looks like in the end to be between the 7960 and the 601, at least that seems to be the conventional wisdom..`
`19:38.25`	`*** join/#asterisk TripleFFFF (n=TripleFF@147-102.mc.cite.net)`
`19:38.47`	`*** join/#asterisk zotz (n=zotz@24.244.133.115)`
`19:38.49`	`TripleFFFF`	`HEY..`
`19:38.52`	`\lart`	`thanks all..`
`19:39.06`	`[TK]D-Fender`	`601? Overkill....`
`19:39.07`	`[TK]D-Fender`	`oh well`
`19:39.08`	`TripleFFFF`	`on exten => _NXXNXXXXXX,1 and exten => _514NXXXXXX,1`
`19:39.13`	`TripleFFFF`	`is NXXX gonna overide ?`
`19:39.24`	`TripleFFFF`	`i need to force all canada calls elsewhere`
`19:39.26`	`mountainm2k`	`most specific wins`
`19:39.27`	`Qwell[]`	`TripleFFFF: depends`
`19:39.38`	`mountainm2k`	`or, rather, most specific _should_ win`
`19:39.39`	`Qwell[]`	`mountainm2k: I don't think that's entirely true`
`19:39.49`	`mountainm2k`	`oh?`
`19:40.03`	`Qwell[]`	`If you want to guarantee it, you have to do some funky include =>s, to get the order right`
`19:40.07`	`Qwell[]`	`iirc..`
`19:40.11`	`TripleFFFF`	`hmmm`
`19:40.12`	`[TK]D-Fender`	`TripleFFFF : You can play with the sort order, or put some logic in the "generic" one as a safeguard...`
`19:40.12`	`TripleFFFF`	`as in`
`19:40.39`	`[TK]D-Fender`	`TripleFFFF : The Logic approach is probably best...`
`19:40.40`	`TripleFFFF`	`theres already like so many areacodes in canada.. (not as much as usa of course)`
`19:40.45`	`TripleFFFF`	`Macro(checkcountry,${EXTEN})`
`19:40.48`	`TripleFFFF`	`that could help`
`19:40.59`	`TripleFFFF`	`and [macro-checkcountry]`
`19:41.07`	`TripleFFFF`	`exten => s,1,set(NPA=${MACRO_EXTEN:0:3})`
`19:41.07`	`TripleFFFF`	`exten => s,2,GOTOIF($[ "${NPA}" = "418"]?canada\|1)`
`19:41.08`	`TripleFFFF`	`etc?`
`19:41.29`	`loonacy`	`I've never had a problem with extensions not going to the most specific extension.`
`19:41.30`	`Qwell[]`	`TripleFFFF: something like that`
`19:43.30`	`*** join/#asterisk Cyon (n=cyon@216.179.31.170)`
`19:45.02`	`*** join/#asterisk feld_ (n=feld@12.148.212.157)`
`19:45.09`	`Cyon`	`Been a long time since I was here....`
`19:45.12`	`*** join/#asterisk ToyMan (n=stuq@user-12lcqia.cable.mindspring.com)`
`19:48.55`	`TripleFFFF`	`ok`
`19:48.57`	`terrapen`	`http://www.foxnews.com/images/208173/10_2_061306_alberto_kidfloat.jpg`
`19:48.57`	`TripleFFFF`	`Macro(checkcountry,${EXTEN})`
`19:49.01`	`terrapen`	`what could possibly go wrong?`
`19:49.06`	`TripleFFFF`	`if macro sets COUNTRY=CANADA`
`19:49.12`	`TripleFFFF`	`can i use after im out of macro ?`
`19:49.13`	`TripleFFFF`	`yeah`
`19:53.26`	`geoffl`	`Hi, I'm trying to work out a way of getting Asterisk to cope with my planned network setup: Two load-balanced, NATed ADSL connections - so two possible external IPs.`
`19:53.55`	`Strom_C`	`do the load-balancing in an external router :)`
`19:54.54`	`TripleFFFF`	`oh you get a macro var ?`
`19:55.01`	`geoffl`	`Don't see how that would get around having two external IPs because each of the two connections would have their own. BTW, this would be two ISPs`
`19:55.43`	`*** join/#asterisk Koshatul (n=evangeli@CPE-138-217-188-144.qld.bigpond.net.au)`
`19:55.54`	`geoffl`	`TripleFFFF: I can use macros in sip.conf?`
`19:56.59`	`dlynes_office`	`Does anyone know how asterisk chooses what order to play mp3s in, in files mode, off the top of their head? (don't bother looking it up in the code...I can do that...was just looking for an off-the-cuff answer)`
`19:57.24`	`Strom_C`	`geoffl: no no - have the two different ISP connections coming into, say, your cisco router, and have a separate internal IP address for the asterisk box. Let the router make the routing decisions.`
`19:58.47`	`geoffl`	`Strom_C: when I tried that with one route, I got 403 errors unless I specified the external IP in the general section. When I tried it on a per-peer basis, it didn't work.`
`19:58.53`	`*** join/#asterisk stephane_ (n=stephane@merlin.cabale.net)`
`19:58.57`	`Strom_C`	`you using SIP or IAX?`
`19:59.17`	`geoffl`	`Both. I don't have a problem with IAX - just with SIP`
`19:59.41`	`Strom_C`	`yeah, SIP doesnt play well with NAT at all`
`20:00.04`	`TripleFFFF`	`does gotoif go to next if TRUE or FALSE`
`20:00.06`	`Strom_C`	`I want to say look into using SER to route your SIP traffic, but I have no experience with SER`
`20:00.21`	`Strom_C`	`but I'm sure there's someone in here who does have such experience`
`20:01.13`	`[TK]D-Fender`	`* works fine behind NAT most of the time for normal stuff`
`20:02.38`	`geoffl`	`[TK]D-Fender: can SER use externip's on a per-peer basis?`
`20:02.49`	`[TK]D-Fender`	`geoffl : No idea about SER...`
`20:03.32`	`[TK]D-Fender`	`geoffl : Externip & localnet are only for general, and both are required`
`20:04.12`	`TripleFFFF`	`WOW works`
`20:05.17`	`geoffl`	`[TK]D-Fender: thanks`
`20:06.23`	`[TK]D-Fender`	`geoffl : It will forge the header on all SIP messages not destined for a localnet range.`
`20:07.30`	`geoffl`	`[TK]D-Fender: that's SER, right?`
`20:08.41`	`*** join/#asterisk timscott (n=a@d198-53-23-18.abhsia.telus.net)`
`20:09.58`	`gregj`	`what is that zaptel asterisk requres on fbsd ?`
`20:09.58`	`[TK]D-Fender`	`geoffl : No, *. I told you I don't know anything about SER`
`20:10.45`	`[TK]D-Fender`	`gregj : You trying to make life hard on yourself?`
`20:11.02`	`gregj`	`nope`
`20:11.56`	`*** join/#asterisk h0 (n=h0@ool-44c69453.dyn.optonline.net)`
`20:13.02`	`gregj`	`but all info on fbsd says that zaptel is required`
`20:13.16`	`gregj`	`also asterisk doesn't want to strt via rc scripts if zaptel is not running`
`20:13.46`	`geoffl`	`[TK]D-Fender: Sorry - I got confused.`
`20:16.03`	`C4T3l`	`we should all go back to using CP/M. Now that was an operating system I tell you what`
`20:17.41`	`tzanger`	`yeah it was something. heh`
`20:19.10`	`jsaunders`	`* for CP/M!? Tight.`
`20:19.14`	`CoffeeIV`	`are there Wildcard X100P drivers for CP/M ? I've never used it`
`20:19.25`	`jsaunders`	`Heh`
`20:22.06`	`gregj`	`:]`
`20:22.23`	`[TK]D-Fender`	`C4T3l : Long-live legacy Apple!`
`20:23.45`	`*** part/#asterisk geoffl (n=geoff@gjctech.plus.com)`
`20:25.58`	`*** join/#asterisk smackus (n=smackus@63.149.122.94)`
`20:26.47`	`*** join/#asterisk BZBW (i=BZBW@ip67-153-142-109.z142-153-67.customer.algx.net)`
`20:27.09`	`smackus`	`when recording i am using the following, exten => _NXXXXXX,1,SetVar(CALLFILENAME=${CALLERIDNUM}-${EXTEN:0}-${TIMESTAMP})`
`20:27.25`	`smackus`	`i would rather show the extension of the phone that is calling, rather than the caller id of the phone. is this possible?`
`20:27.31`	`smackus`	`if so, what change do I make?`
`20:28.22`	`[TK]D-Fender`	`smackus : That IS using the callerid of the person PLACING the call...`
`20:29.14`	`[TK]D-Fender`	`smackus : As well as the exten they are dialing...`
`20:29.48`	`smackus`	`ok, then i have something set up wrong in my config files then... I want my outgoing caller id to show a specific number. I am setting that per sip.conf. I am using the local telephone number. That will be the same on every phone so people calling back go to an inbound queue. Then I want the extension to show in the variables for my files. Where have I gone wrong?`
`20:30.22`	`[TK]D-Fender`	`smackus : What kind of interface are you calling out on? That previous line has no bearing on outbound ID....`
`20:30.23`	`*** join/#asterisk catlee (n=catlee@Z-pc1-959-S1.gw2.tor1.rogerstelecom.net)`
`20:30.26`	`catlee`	`Good afternoon`
`20:30.35`	`[TK]D-Fender`	`catlee : welcome back`
`20:30.38`	`catlee`	`I had some more luck getting asterisk working with SIP once I got into the office`
`20:30.50`	`smackus`	`it goes out on zap`
`20:30.52`	`catlee`	`ekiga isn't the best client`
`20:30.59`	`[TK]D-Fender`	`smackus : Details please..`
`20:31.07`	`smackus`	`ok.. hang tight.`
`20:31.16`	`[TK]D-Fender`	`catlee : no it isn't, but this is a test and Ekiga is free...`
`20:31.23`	`[TK]D-Fender`	`smackus : What kind of ZAp?`
`20:31.52`	`catlee`	`I notice that the first few seconds of a call (e.g. to voicemail) are lost. Is there something I should be doing in my dial plan, or is this ekiga's fault?`
`20:31.57`	`*** join/#asterisk Johnnie (n=jdlewis@pdpc/supporter/active/Johnnie)`
`20:32.37`	`smackus`	`[TK]D-Fender:http://pastebin.com/707307`
`20:32.40`	`catlee`	`Like if I have 'exten => 1,1,SayUnixTime()'`
`20:32.54`	`*** join/#asterisk lars-ut (n=lars-ut@70.103.228.158)`
`20:32.59`	`catlee`	`I never get to heard the first few parts of the time`
`20:34.02`	`*** join/#asterisk dandan (i=dandan@pacanka.com)`
`20:34.07`	`dandan`	`hey all :)`
`20:34.07`	`*** join/#asterisk mtaht4 (n=m@reserve-64-79-114-30.wiline.com)`
`20:34.23`	`[TK]D-Fender`	`smackus : Wrong answer.. what technology are those lines?`
`20:34.31`	`Bert-`	`hello there :)`
`20:34.37`	`dandan`	`i am trying to make the outgoing work over PRI but my provider tells me that I am passing a 'progress indicator field' to him`
`20:34.39`	`smackus`	`pri t1`
`20:34.42`	`dandan`	`anyway to make it go away?`
`20:34.50`	`Bert-`	`according to you guys, what is the best softphone for Linux ?`
`20:35.03`	`catlee`	`Also, in no particular order: a) I need FXO cards to connect my system to a PSTN line, right?`
`20:35.04`	`[TK]D-Fender`	`smackus : Ok, well go set callerid then, good odds you can do it...`
`20:35.10`	`catlee`	`b) I'd like to manage sip accounts / extensions / voicemail with a database, is that possible?`
`20:35.25`	`[TK]D-Fender`	`smackus : Read up on the CALLERID() function.`
`20:35.26`	`*** join/#asterisk clyrrad (n=ddd@CPE001195f553c7-CM0011aea484a4.cpe.net.cable.rogers.com)`
`20:35.41`	`catlee`	`c) Are roaming extensions possible? Eventually I'd like to set up another server in another office, and allow people's extensions to follow them there.`
`20:36.02`	`[TK]D-Fender`	`catlee : typically yeah, some kind of card or interface box, adn for the size you described a databsed system simply isn't worth it.`
`20:36.17`	`[TK]D-Fender`	`catlee : Yes, roaming ext's is possible.`
`20:36.24`	`justinu\|laptop`	`catlee: the chan_agents stuff allow people to "login" to phones`
`20:36.43`	`[TK]D-Fender`	`justinu\|laptop : I'm sure he's thinking of more than Queues...`
`20:37.04`	`justinu\|laptop`	`so how do you do it then?`
`20:37.19`	`clyrrad`	`anyone here farmiliar with Astertest?`
`20:37.20`	`[TK]D-Fender`	`justinu\|laptop : A lot of dialplan to pass the info....`
`20:37.36`	`dandan`	`i am trying to make the outgoing work over PRI but my provider tells me that I am passing a 'progress indicator field' to him - anyone knows how to stop that?`
`20:38.19`	`clyrrad`	`I have Astertest installed - and when I try to load Asterisk it tells me app_securax_serverload.so: undefined symbol: ast_load`
`20:38.26`	`clyrrad`	`can anyone help me with that?`
`20:38.42`	`catlee`	`Ah, so you set up 'virtual' extensions for people, and then agents are associated with queues attached to those extensions?`
`20:39.05`	`[TK]D-Fender`	`catlee : there are a number of ways, some more/less painful than others.`
`20:39.30`	`[TK]D-Fender`	`catlee : But I'm betting this isn't a make/break factor in your choosing * anyways.`
`20:39.42`	`catlee`	`nope`
`20:39.59`	`clyrrad`	`TK - Are you farmiliar with Astertest?`
`20:40.00`	`*** join/#asterisk hads (n=hads@mail.nice.net.nz)`
`20:40.02`	`catlee`	`I'd like to get some idea beforehand though`
`20:40.09`	`catlee`	`I'd hate to have to completely redo the configuration`
`20:40.11`	`[TK]D-Fender`	`clyrrad : nope`
`20:40.30`	`clyrrad`	`:( how about ast_load?`
`20:40.49`	`[TK]D-Fender`	`catlee : If you template things right the most you'd have to do is a couple of macros on each side.`
`20:41.26`	`C4T3l`	`just a quick question, does anyone know if Norstar Meridian phones come with a chanSpy-like function`
`20:41.27`	`[TK]D-Fender`	`catlee : But if you're just starting I'd be impressed as to how far you'd get on your own from scratch on this one....`
`20:41.46`	`[TK]D-Fender`	`C4T3l : Norstar phones don't HAVE features.. its the PBX....`
`20:42.02`	`[TK]D-Fender`	`C4T3l : Digital phones = dumb`
`20:42.10`	`catlee`	`[TK]D-Fender: heh`
`20:42.15`	*** join/#asterisk Lino` (n=Lino@i577BC355.versanet.de)
`20:42.24`	`dandan`	`i am trying to make the outgoing work over PRI but my provider tells me that I am passing a 'progress indicator field' to him - anyone knows how to stop that?`
`20:42.27`	`catlee`	`[TK]D-Fender: one system is more than enough for me right now :)`
`20:42.58`	`[TK]D-Fender`	`dandan : Pastebin your zapata`
`20:43.16`	`[TK]D-Fender`	`catlee : Actually I just figured out how I'd do it :)`
`20:43.50`	`dandan`	`[TK]D-Fender: http://pastebin.ca/65240`
`20:44.19`	`C4T3l`	`[TK]D-Fender: yeah, I've never been impressed with norstar`
`20:44.27`	`catlee`	`Is there a good * reference online? I've been using the voip-info wiki and the * book so far`
`20:44.28`	`*** join/#asterisk shmaltz (n=mybox@mail.dmaven.com)`
`20:44.31`	`dandan`	`[TK]D-Fender: with sangoma A101`
`20:45.05`	`[TK]D-Fender`	`dandan : Add pridialplan = local`
`20:45.05`	`[TK]D-Fender`	`prilocaldialplan = local`
`20:45.08`	`justinu\|laptop`	`catlee, those are the references, afaik`
`20:45.13`	`shmaltz`	`If I'm running a system just for asterisk, is a swap partition a must?`
`20:45.34`	`[TK]D-Fender`	`catlee : Those are the only 2 worth considering really...`
`20:45.42`	`Strom_C`	`shmaltz: give it twice your RAM and you wont have to worry about it`
`20:45.56`	`dandan`	`[TK]D-Fender: thanks, i will try`
`20:46.02`	`dandan`	`trying right now`
`20:46.03`	`dandan`	`that is :)`
`20:46.05`	`shmaltz`	`Storm_C, the problem is I havn't got that much room`
`20:46.20`	`*** part/#asterisk VoicePulse (n=contact@unaffiliated/voicepulse)`
`20:46.27`	`Strom_C`	`what? what are you running on? a 1 gig drive from the 1990s?`
`20:46.28`	`*** join/#asterisk VoicePulse (n=contact@unaffiliated/voicepulse)`
`20:46.30`	`timscott`	`how much RAM do you have, shmaltz?`
`20:46.36`	`shmaltz`	`Storm_C I want to run wihtout swap`
`20:46.39`	`dandan`	`[TK]D-Fender is your sangoma restarting all channels when starting asterisk?`
`20:46.42`	`dandan`	`(twice?)`
`20:46.43`	`shmaltz`	`no an IDE Flash card 2GB`
`20:46.51`	`shmaltz`	`1 GB of RAM`
`20:46.58`	`timscott`	`ah, ya dont need swap.`
`20:47.01`	`Strom_C`	`give it 512 MB of swap then`
`20:47.07`	`timscott`	`:)`
`20:47.09`	`Strom_C`	`or no swap`
`20:47.10`	`dandan`	`:>`
`20:47.11`	`Strom_C`	`whatever :)`
`20:47.34`	`[TK]D-Fender`	`dandan : Sometimes I think.`
`20:47.34`	`shmaltz`	`Storm_C thanks, no swap is good for me :)`
`20:47.48`	`Strom_C`	`shmaltz: Strom, not Storn`
`20:47.51`	`Strom_C`	`I'm not weather`
`20:47.54`	`file`	`Strommy Boy!`
`20:47.54`	`timscott`	`I dunno, I have a couple asterisk machines running ~2GB drives, they only have 256MB swap`
`20:47.55`	`shmaltz`	`I'm building my first solid state system`
`20:47.56`	`*** join/#asterisk tsurk0 (n=tsurko@85.187.160.157)`
`20:48.00`	`Strom_C`	`filester!`
`20:48.03`	`Strom_C`	`whats cookin`
`20:48.03`	`C4T3l`	`shmaltz: you biulding an embedded?`
`20:48.03`	`shmaltz`	`lol`
`20:48.12`	`shmaltz`	`C4T3I, yep`
`20:48.14`	`file`	`dealing with silly code, you?`
`20:48.23`	`Strom_C`	`eating and working`
`20:48.28`	`C4T3l`	`shmaltz: what type of hardware?`
`20:48.39`	`tanvalmg`	`Anyone running Asterisk with TDM400P on a SuperMicro server?`
`20:49.23`	`shmaltz`	`C4T3I, epia miniitx`
`20:49.46`	`C4T3l`	`shmaltz: is it for a SOHO?`
`20:49.52`	`[TK]D-Fender`	`tanvalmg : I did very briefly`
`20:50.06`	`tanvalmg`	`any problem with it?`
`20:50.13`	`*** part/#asterisk TripleFFFF (n=TripleFF@147-102.mc.cite.net)`
`20:50.14`	`shmaltz`	`C4T3I, for a 12 user application, with CB for POTS`
`20:50.42`	`shmaltz`	`C4T3I, http://caseoutlet.com/shopexd.asp?id=534`
`20:50.57`	`tanvalmg`	`D-Fender: what model? Did you have any problem with it?`
`20:51.00`	`C4T3l`	`shmaltz: sweet, you using astlinux or full blown asterisk & linux?`
`20:51.08`	`*** join/#asterisk ToTo (n=ToTo@host212-207.pool872.interbusiness.it)`
`20:51.22`	`shmaltz`	`C4T3I, using Slackware 10.2 for now, might switch don't know yet`
`20:51.27`	`[TK]D-Fender`	`tanvalmg : Didn't use it very long... how about you ask a REAL question....`
`20:51.40`	`shmaltz`	`C4T3I, and this:`
`20:51.42`	`shmaltz`	`http://www.logicsupply.com/product_info.php/cPath/44/products_id/512`
`20:51.43`	`justinu\|laptop`	`lol`
`20:51.59`	`[TK]D-Fender`	`tanvalmg : And by that last one you want to know ehich Supermicro board I'm using?`
`20:52.14`	`tanvalmg`	`yes`
`20:52.30`	`tanvalmg`	`D-Fender: yes..if I may ask`
`20:53.02`	`dandan`	`[TK]D-Fender: still nothing, can you check http://pastebin.ca/65247`
`20:53.02`	`*** join/#asterisk somegeek (i=levin@tor/regular/somegeek)`
`20:53.07`	`[TK]D-Fender`	`tanvalmg : No idea anymore.. its an old one. Do you have an actual PROBLEM right now?`
`20:53.09`	`dandan`	`that is what I get in my console`
`20:53.36`	`dlynes_office`	`[TK]D-Fender: of course not..he just wants to get you all riled up ;)`
`20:53.44`	`[TK]D-Fender`	`dandan : You sure they're really set as PRI?`
`20:53.45`	`tanvalmg`	`D-Fender: No problem actually..just looking into Supermicro as a possible new server for our Asterisk system`
`20:53.52`	`*** join/#asterisk lilo (i=levin@freenode/staff/pdpc.levin)`
`20:54.07`	`dandan`	`[TK]D-Fender: what do you mean?`
`20:54.10`	`dlynes_office`	`tanvalmg: lotsa peeps running asterisk on supermicro with no problems, if that's what you're getting at`
`20:54.14`	`[TK]D-Fender`	`tanvalmg : Most are fine, just go to Digium.com and check out the compatability list, and when in doubt PHONE them.`
`20:54.19`	`mitcheloc`	`is anyone here familiar with the digium bug tracker?`
`20:54.34`	`dlynes_office`	`mitcheloc: no....nobody is...none at all :)`
`20:54.35`	`clyrrad`	`How do you guys test the capacity of your servers? As in how many consectuative calls it can handle?`
`20:54.39`	`*** join/#asterisk kiko69 (n=keith@adsl-75-16-91-106.dsl.irvnca.sbcglobal.net)`
`20:54.52`	`[TK]D-Fender`	`dandan : Maybe they're running your link as dumb-T1 (CAS) and not PRI....`
`20:55.01`	`mitcheloc`	`dlynes_office: =P`
`20:55.04`	`tanvalmg`	`D-Fender: I've looked into Digium site...thanks very much`
`20:55.09`	`Strom_C`	`clyrrad: servers can handle infinite consecutive calls. it's the concurrent calls you need to be worried about :)`
`20:55.15`	`dlynes_office`	`I think we need to add "Don't ask to ask, just ask" to the topic :)`
`20:55.22`	`clyrrad`	`Storm_C....... Thats what I ment`
`20:55.35`	`[TK]D-Fender`	`dlynes_office : ...`
`20:55.37`	`justinu\|laptop`	`i dunno, if each of those consecutive calls lasts 1ms, you might have a problem`
`20:55.37`	`[TK]D-Fender`	`~suggestions`
`20:55.40`	`jbot`	`from memory, suggestions is 1) Don't ask to ask. Just say your problem, 2) Don't repeat until 5 mins after, 3) Read and re-read the docs first, then admit it if you REALLY don't understand. You're wasting your time and ours if you haven't at least tried. 4) If your problem ain't solved, come back in 12 hrs or 24 hrs later. We're very international. 5) Be polite ...`
`20:55.40`	`Strom_C`	`Why the hell does everyone call me "Storm"?`
`20:55.43`	`dandan`	`[TK]D-Fender: hmm... no idea, the t-1 comes off of MC 3810 Cisco router, and from what I can see from vendor guidelines it is a PRI...`
`20:55.56`	`dandan`	`(btw. incoming call works)...`
`20:56.00`	`[TK]D-Fender`	`dandan : :/ dunno.....`
`20:56.02`	`mitcheloc`	`dlynes_office: shush! fine, my question is regarding this: http://bugs.digium.com/view.php?id=6082 i posted a reply, and since it's a closed bug, i don't think anyone will pay attention, should i start a new bug?`
`20:56.23`	`justinu\|laptop`	`Strom_C: dyslexia`
`20:56.24`	`dlynes_office`	`mitcheloc: when they close a bug, there's usually a reason stated`
`20:56.33`	`[TK]D-Fender`	`mitcheloc : If you're sure you'd be ignored otherwise, haven't you just answered your own question? ;)`
`20:56.35`	`dlynes_office`	`mitcheloc: and that particular one is open, not closed`
`20:56.52`	`clyrrad`	`so Strom_C what do you do to test the server?`
`20:57.01`	`mitcheloc`	`dlynes_office: it's more of a patch, ah, why did i think it was closed then`
`20:57.11`	`dandan`	`[TK]D-Fender: hmm.. I have no idea how to block that field...`
`20:57.29`	`dlynes_office`	`mitcheloc: because it says, " Resolution open"?`
`20:57.42`	`dlynes_office`	`heh`
`20:57.44`	`dandan`	`oh, and they asked me the silly question if I can change the capability to 3.1 kHz audio...`
`20:57.47`	`dandan`	`that was weird...`
`20:58.04`	`Strom_C`	`clyrrad: usually I just throw lots of clock cycles and RAM at it and keep everything ulaw, and then my bottleneck shifts from the box to the bandwidth`
`20:58.05`	`dlynes_office`	`mitcheloc: actually...weren't we talking about that particular bug the other day?`
`20:58.20`	`dlynes_office`	`No, I guess not`
`20:58.25`	`*** join/#asterisk Jick (n=jicksta@66-100-35-23-static.dsl.oplink.net)`
`20:58.33`	`clyrrad`	`Storm_C have you ever tried Astertest?`
`20:58.35`	`dlynes_office`	`The one I was talking with someone the other day was one JerJer reopened`
`20:58.38`	`mitcheloc`	`i don't think so, but i do like the new feature in asterisk, already added it to snap`
`20:58.53`	`mitcheloc`	`but i'd like to know why it doesn't work with voicemail =/`
`20:58.53`	`Strom_C`	`clyrrad: no`
`20:59.10`	`dlynes_office`	`mitcheloc: see the last comment from mogor, though?`
`20:59.13`	`Strom_C`	`clyrrad: and stop calling me Storm`
`20:59.19`	`Strom_C`	`my name is Strom`
`20:59.26`	`clyrrad`	`LOL`
`20:59.27`	`justinu\|laptop`	`shirley you can't be serious`
`20:59.28`	`clyrrad`	`sorry bro`
`20:59.30`	`KranZ`	`storm, we need rain!`
`20:59.31`	`clyrrad`	`missed that :)`
`20:59.32`	`dandan`	`well, it is still better than srom...`
`20:59.32`	`dandan`	`:)`
`20:59.37`	`justinu\|laptop`	`or snom`
`20:59.42`	`dandan`	`yeah, snom!`
`20:59.42`	`dandan`	`<PROTECTED>`
`20:59.51`	`Strom_C`	`I'm in big trouble if Snom comes out with a phone called the Carlson`
`20:59.54`	`mitcheloc`	`dlynes_office: yes, what about it?`
`20:59.55`	`dandan`	`Strom_C: /nick Snom :)`
`21:00.17`	`dlynes_office`	`mitcheloc: well, actually the last five or so comments`
`21:00.18`	`Jason99`	`Is it safe to do a DNS round robin which points to multiple Asterisk servers.. will the voice phones function correctly? All servers would have the exact same config..`
`21:00.21`	`Snom`	`blah blah blah`
`21:00.31`	`dandan`	`hehehe`
`21:00.32`	`dandan`	`:)`
`21:00.34`	`dlynes_office`	`mitcheloc: they're wanting you or adomjan to clean it up a bit before it gets committed`
`21:00.39`	`justinu\|laptop`	`this channel needs a an Almon_S`
`21:00.43`	`Jick`	`Does anyone how to implement a forced hangup when a called user presses the pound key?`
`21:00.59`	`mitcheloc`	`dlynes_office: it's already commited to trunk... and i didn't submit the patch, i'm just harassing them by testing it ;)`
`21:01.06`	`dlynes_office`	`mitcheloc: oh...nvm`
`21:01.13`	`dlynes_office`	`mitcheloc: i was looking at the wrong end of the comments`
`21:01.33`	`mitcheloc`	`dlynes_office: looks like i'm not the only one with reading problems =P`
`21:02.19`	`*** join/#asterisk JINDAL (n=root@220.226.54.1)`
`21:02.52`	`*** part/#asterisk JINDAL (n=root@220.226.54.1)`
`21:03.11`	`dlynes_office`	`mitcheloc: it hasn't been committed to trunk yet, either`
`21:03.15`	`dlynes_office`	`mitcheloc: that's why it's still open`
`21:03.16`	`*** join/#asterisk puzzled (n=patrick@puzzled.xs4all.nl)`
`21:03.25`	`dlynes_office`	`mitcheloc: it's only been committed to jcollie's branch`
`21:03.49`	`rikstah`	`if anyone's interested ive just made some new builds of Asterisk Desktop Manager at http://adm.hamnett.org/?q=node/2 if anyone wants to test it i'd appreciate it`
`21:04.41`	`*** join/#asterisk _4d4m_ (n=adam@62.69.102.99)`
`21:04.50`	`mitcheloc`	`dlynes_office: perhaps i posted my comment in the wrong place, but the function i am using is here http://bugs.digium.com/view.php?id=6682`
`21:04.53`	`mitcheloc`	`and that bug is closed`
`21:05.21`	`mitcheloc`	`they are listed under "related"`
`21:05.54`	`Jick`	`Does anyone know what .conf files allows called users to force a hangup by pressing the # key? I know I've seen it done before but I can't find information on it anywhere...`
`21:05.58`	`dlynes_office`	`mitcheloc: next step is usually for it to be committed to oej's test-this-branch, and then after that, kevin fleming usually decides if it's ready for trunk; russell decides if it's ready for a release (kevin rubber stamps it)`
`21:06.13`	`Beirdo`	`OK, upgraded the system to ubuntu dapper, bringing 1.2.7, and the CDR is no longer bogus`
`21:06.17`	`dlynes_office`	`mitcheloc: those ones are closed, because they're taken care of by your bug report`
`21:06.53`	`file`	`justinu\|laptop: you're talking about asterisk trunk?`
`21:07.06`	`Qwell[]`	`file: You tell him, file!`
`21:07.10`	`justinu\|laptop`	`well, i'd like to see it in a release tarball, actually`
`21:07.20`	`Qwell[]`	`justinu\|laptop: 1.36`
`21:07.25`	`Qwell[]`	`.0`
`21:07.26`	`file`	`well it won't be in 1.2`
`21:08.06`	`dlynes_office`	`Beirdo: there ya go...pays to upgrade, doesn't it?`
`21:08.08`	`file`	`it's in trunk though`
`21:08.19`	`justinu\|laptop`	`cool`
`21:08.22`	`Beirdo`	`yup`
`21:08.29`	`justinu\|laptop`	`i could probably backport it to my own releases then`
`21:08.42`	`mitcheloc`	`dlynes_office: playdtmf is already in trunk, so should i leave my comment where it is or put it in the closed bug?`
`21:08.43`	`justinu\|laptop`	`i hope it works better than it did 6 months ago tho`
`21:09.22`	`Jason99`	`Is it safe to do a DNS round robin which points to multiple Asterisk servers.. will the voice phones function correctly? All servers would have the exact same config..`
`21:09.33`	`shmaltz`	`anybody here know if the Adit 600 have an output for 48V DC so I can use it to power my Tellabs Echo Can?`
`21:09.38`	`dlynes_office`	`mitcheloc: 6682 is only for the new manager action; 6082 is to create a new manager event whenever a dtmf digit is sent on the channel`
`21:09.48`	`dlynes_office`	`mitcheloc: two entirely different features`
`21:10.07`	`mitcheloc`	`dlynes_office: so "move" it then?`
`21:10.29`	`dlynes_office`	`i didn't look at your comment...so i wouldn't know which it's applicable to`
`21:10.52`	`dlynes_office`	`mitcheloc: your comment is applicable to neither`
`21:11.07`	`dlynes_office`	`mitcheloc: yours is PlayDTMF; those are both referring to SendDTMF`
`21:11.13`	`*** join/#asterisk Winkie (n=urmom@cpc3-stre1-0-0-cust656.bagu.cable.ntl.com)`
`21:11.37`	`dlynes_office`	`mitcheloc: PlayDTMF, afaik is a Dialplan application`
`21:11.41`	`dlynes_office`	`mitcheloc: it's not a manager application`
`21:12.55`	`mitcheloc`	`playdtmf is a manager application, senddtmf is a dialplan application`
`21:13.10`	`dlynes_office`	`not according to those bug reports`
`21:13.42`	`*** join/#asterisk r0d3nt (n=RatMan@foster.stonedcoder.org)`
`21:13.42`	`dlynes_office`	`ok, that's just plain weird`
`21:13.57`	`dlynes_office`	`they report it as SendDTMF, but the code is using PlayDTMF`
`21:14.00`	`dlynes_office`	`talk about confusing`
`21:14.23`	`mitcheloc`	`not if you read the bug`
`21:14.33`	`mitcheloc`	`dlynes_office: they changed the name to prevent confusion heh`
`21:15.47`	`*** join/#asterisk ToTo (n=ToTo@host212-207.pool872.interbusiness.it)`
`21:17.11`	`dlynes_office`	`mitcheloc: yeah...i would say your comment belongs in the other one`
`21:17.22`	`dlynes_office`	`mitcheloc: you're triggering an event, not responding to the event, correct?`
`21:18.00`	`mitcheloc`	`dlynes_office: yes sir, even though it's closed, will they notice it?`
`21:18.14`	`dlynes_office`	`mitcheloc: if it's closed, i don't think you can add a comment`
`21:18.45`	`iCEBrkr`	`!seen [TK]D-Fender`
`21:18.52`	`dlynes_office`	`mitcheloc: but you might be able to get it reopened for discussion, by asking brian (bweschke)`
`21:18.56`	`iCEBrkr`	`~seen [TK]D-Fender`
`21:18.59`	`jbot`	`[tk]d-fender is currently on #asterisk (9h 9m 17s). Has said a total of 226 messages. Is idling for 22m 26s, last said: 'mitcheloc : If you're sure you'd be ignored otherwise, haven't you just answered your own question? ;)'.`
`21:19.18`	`iCEBrkr`	`?`
`21:19.21`	`iCEBrkr`	`That's not right`
`21:19.23`	`brc_`	`eh?`
`21:19.27`	`brc_`	`oh, hah, not me`
`21:19.29`	`dlynes_office`	`mitcheloc: i would ask him in #asterisk-dev...he's a lot more active in there`
`21:19.35`	`dlynes_office`	`iCEBrkr: yeah it is`
`21:19.57`	`mitcheloc`	`dlynes_office: okay, i'll head over there, are you referring to oej?`
`21:19.58`	`dlynes_office`	`[12:42] <[TK]D-Fender> mitcheloc : If you're sure you'd be ignored otherwise, haven't you just answered your own question? ;)`
`21:20.03`	`dlynes_office`	`it is now 13:05`
`21:20.14`	`dlynes_office`	`mitcheloc: bweschke`
`21:20.21`	`dlynes_office`	`mitcheloc: he's the one that closed the report`
`21:21.14`	`iCEBrkr`	`dlynes_office: I haven't been at work for 9hrs and I saw him talking in channel just before lunch`
`21:21.14`	`dlynes_office`	`oej is olle`
`21:21.28`	`*** part/#asterisk Vorondil (n=jkiffmey@miro.voltaiccommerce.com)`
`21:21.29`	`dlynes_office`	`iCEBrkr: and?`
`21:21.37`	`mitcheloc`	`dlynes_office: okay, i'll bugger off then, thanks`
`21:21.49`	`dlynes_office`	`iCEBrkr: it says he's been idle for 22 minutes and 26 seconds`
`21:21.49`	`iCEBrkr`	`oh, I misread`
`21:21.54`	`iCEBrkr`	`I thought it said he was idle for 9hrs`
`21:22.26`	`jaike`	`please help, on asterisk what seems to be the problem if agents cant login`
`21:22.33`	`*** join/#asterisk asterboy (n=kevin@S010600485480f4be.ed.shawcable.net)`
`21:22.34`	`jaike`	`but all phones have dialtone`
`21:22.37`	`Jick`	`Hasn't someone in here developed a system with the pound-key hangup feature? A pointer in the right direction would be greatly appreciated. :)`
`21:22.56`	`Strom_C`	`jaike: what does the console say when agents try to log in?`
`21:22.59`	`dlynes_office`	`jaike: dialtone just means the phones are able to register...has nothing to do with the agents/queue applications`
`21:23.17`	`dlynes_office`	`Jick: of course`
`21:23.35`	`Strom_C`	`~ygwypf`
`21:23.41`	`dlynes_office`	`Jick: define an extension of '#' with a priority of 1 within the current context`
`21:23.55`	`dlynes_office`	`Jick: i.e. in the context of your autoattendant`
`21:24.18`	`dlynes_office`	`Jick: you'll need to tell your phone not to use '#' as the dial termination character though`
`21:24.21`	`dandan`	`[TK]D-Fender: are you still here?`
`21:24.38`	`dandan`	`can someone look at: http://pastebin.ca/65255 and tell me what the hell is wrong?`
`21:24.38`	`dlynes_office`	`Jick: erm...actually...might not have to`
`21:24.47`	`jaike`	`yes.... phone will say, agent login and by the time you press your ID it just hang up.. supposedly it will say agent logged in, then press # say goodbye`
`21:25.00`	`Jick`	`dlynes_office : Hmmm. How can that extension be reached when in a call with another user to hang them up?`
`21:25.12`	`dlynes_office`	`Jick: oh...that's what you want to do`
`21:25.21`	`Strom_C`	`jaike: pastebin the relevant config files`
`21:25.23`	`Strom_C`	`~pb`
`21:25.25`	`jbot`	`extra, extra, read all about it, pb is a place to paste your stuff without flooding the channel - try http://pastebin.com/, or http://pastebin.ca, or http://channels.debian.net/paste, or for #oe use http://oe.pastebin.com, or http://bzflag.pastebin.ca/`
`21:25.25`	`dlynes_office`	`Jick: take a look at the documentation on the wiki for the dial command`
`21:25.31`	`smackus`	`ok, so I am still confused on a couple of things. I am able to change the caller id name and number on my old telephone system, but moving to the new asterisk phone system I am only able to change the number.`
`21:25.31`	`Jick`	`dlynes_office : Yeah. The called person hits # to hang the call up`
`21:25.38`	`smackus`	`I am setting caller id info in the sip.conf.`
`21:25.43`	`smackus`	`can anyone help me with this issue?`
`21:25.45`	`Jick`	`dlynes_office : Ahh, okay. Checking it out now.`
`21:25.46`	`dlynes_office`	`Jick: there's some info on there about keeping asterisk in the media path`
`21:25.48`	*** join/#asterisk Lino` (n=Lino@i577BCFA4.versanet.de)
`21:26.00`	`Strom_C`	`smackus: name and number for calls to internal extensions only, or are you calling out over the PSTN?`
`21:26.19`	`catlee`	`alright, I'm off for the night`
`21:26.21`	`catlee`	`thanks for the tips`
`21:26.26`	`smackus`	`for calls going out over my T1s, yes`
`21:26.34`	`Strom_C`	`smackus: you can only set number`
`21:26.41`	`Jick`	`dlynes_office : Hmm, there's a feature to transfer with call with #`
`21:26.42`	`Strom_C`	`name is handled by the telco network`
`21:27.01`	`smackus`	`on my old system it allows me to change the displayed name.`
`21:27.02`	`Strom_C`	`it's complicated, but in a nutshell, the name lookup happens on the terminating end of the call`
`21:27.09`	`dlynes_office`	`Jick: so transfer it to a local extension, and have that local extension execute the hangup dialplan application`
`21:27.27`	`Strom_C`	`smackus: are you calling internally to your own phones, or are you calling PSTN phones?`
`21:27.46`	`Jick`	`dlynes_office : Yeah, I was sticking that in my dialplan just now :)`
`21:27.54`	`smackus`	`PSTN`
`21:28.04`	`Strom_C`	`smackus: then name is handled by the telco.`
`21:28.13`	`Strom_C`	`look up CNAM for more details`
`21:28.21`	`smackus`	`but they tell me it can be over ridden by the pbx`
`21:28.32`	`Strom_C`	`which crazy telco do you have?`
`21:28.34`	`smackus`	`as is the case with my old system`
`21:28.49`	`smackus`	`ACC is the carrier.`
`21:28.55`	`smackus`	`ATnT basically`
`21:28.56`	`dandan`	`BLAH!`
`21:29.02`	`dandan`	`stupid STUFF!`
`21:29.12`	`Strom_C`	`AT&T is telling you that you can override the /name/ display?`
`21:29.17`	`smackus`	`yes`
`21:29.24`	`Strom_C`	`AT&T interexchange?`
`21:29.27`	`Strom_C`	`or AT&T LEC?`
`21:29.41`	`zoa`	`anyone from digium huntsville awake ?`
`21:29.59`	`Strom_C`	`zoa: I can throw my iced tea on someone and wake them up`
`21:30.05`	`smackus`	`that I do not know how to answer`
`21:30.17`	`zoa`	`Strom_C: go yell at mark :p`
`21:30.18`	`Strom_C`	`smackus: long distance or local`
`21:30.30`	`smackus`	`long distance`
`21:30.35`	`dlynes_office`	`dandan: can you pastebin your zaptel.conf and your zapata.conf files, and a zap show status output?`
`21:30.42`	`Strom_C`	`smackus: so it's interexchange then, I'd assume`
`21:30.45`	`dandan`	`dlynes_office: I am on it...`
`21:30.51`	`dandan`	`i am just sooooo frustrated...`
`21:30.53`	`smackus`	`ok`
`21:30.55`	`dandan`	`incoming calls work...`
`21:31.07`	`Strom_C`	`smackus: have you tried using Set(CALLERID(name) ?`
`21:31.35`	`smackus`	`in the exten => lines? let me try that.`
`21:31.41`	`smackus`	`i have been setting it in sip.conf`
`21:32.01`	`Strom_C`	`you're going out over PRI. why would you do that in sip.conf? :)`
`21:32.04`	`dlynes_office`	`dandan: also, what's your physical configuration? are you on a t1/pri, e1/pri, analog/t1, analog/e1? what country are you in? which ilec are you using to provide you with the feed?`
`21:32.26`	`dlynes_office`	`dandan: it looks you're probably on 2 channel isdn`
`21:32.37`	`dandan`	`dlynes_office: 24 chan pri...`
`21:32.40`	`smackus`	`first crack at this stuff... I am sure I am doing a hundred things wrong :-D`
`21:32.52`	`dandan`	`dlynes_office: hold on, compiling everything for you`
`21:33.12`	`dlynes_office`	`dandan: ok, so 23 b's, and 1 d`
`21:33.12`	`dandan`	`dlynes_office: yes`
`21:33.18`	`dlynes_office`	`dandan: Canada? USA?`
`21:33.25`	`*** part/#asterisk acrg (n=aragon@decoder.geek.sh)`
`21:33.29`	`dandan`	`USA, CT, CLEC: CTC (Marlboro, MA)`
`21:33.36`	`dlynes_office`	`ok`
`21:33.58`	`timscott`	`Has anyone here ever used AtlasVoice for termination?`
`21:33.59`	`timscott`	`re: http://billing.atlasvoice.com/billing/index.php?_page=AtlasVoice:businesservices`
`21:34.24`	`dandan`	`the T comes in as: T, and then it is split by MC 3810 to eth out (net) and PRI out (voice)`
`21:34.27`	`smackus`	`Strom_C:so you are saying to do something like this: exten => 120,1,Set(CALLERID(blah)`
`21:34.33`	`Strom_C`	`no`
`21:34.44`	`dandan`	`dlynes_office: i assume it is an voip aggregator of some sort...`
`21:34.47`	`timscott`	`If anyone has any experience or familiarity with them, I would appreciate comments on them. Feel free to PM me.`
`21:34.55`	`Strom_C`	`exten => 2368,1,Set(CALLERID(name)=dogballs)`
`21:35.08`	`smackus`	`oh, gotcha`
`21:35.13`	`dlynes_office`	`dandan: probably just splitting out your d channel for internet`
`21:35.15`	`timscott`	`hehe dogballs`
`21:35.20`	`timscott`	`catsex, dogballs, and dead hookers`
`21:35.20`	`zoa`	`Strom_C: guess it helped :)`
`21:35.31`	`dlynes_office`	`goatse.cx`
`21:35.41`	`Strom_C`	`zoa: never doubt the power of good old Southern iced tea`
`21:35.43`	`PMantis`	`wonderful`
`21:35.55`	`timscott`	`coke > iced tea`
`21:35.58`	`timscott`	`north > south`
`21:36.00`	`dlynes_office`	`i knew ya wanted some of that, PMantis`
`21:36.01`	`timscott`	`me > you`
`21:36.07`	`[TK]D-Fender`	`dlynes_office : EVIL`
`21:36.09`	`dandan`	`dlynes_office: hm... funny thing: i have 23 channels, of which max 8 is for voice, which gives me 16 voice channles (compression) and rest for data. If noone is on the phone I have all 23 channels for data...`
`21:36.13`	`Strom_C`	`actually, I prefer unsweetened iced tea to the sweetened stuff they have down here`
`21:36.36`	`Strom_C`	`I drink it and I'm reminded of when I was 7 and put an entire box of sugar into a glass of iced tea`
`21:36.39`	`dandan`	`dlynes_office: http://pastebin.ca/65261`
`21:37.03`	`PMantis`	`I'm using Ubuntu, and /etc/init.d/zaptel is not symlinked to /etc/rc?.d/... but still the modules load on bootup. What else could be loading the modules?`
`21:37.16`	`dandan`	`PMantis: /etc/modules.conf?`
`21:37.44`	`dlynes_office`	`PMantis: hotplug is loading it`
`21:37.53`	`PMantis`	`danalien, /etc/modules doesn't have it.`
`21:37.59`	`PMantis`	`dlynes_office, Ahhhhhhh`
`21:38.03`	`dandan`	`:)`
`21:38.17`	`PMantis`	`ok, that's cool.`
`21:38.20`	`dandan`	`yeah, I have it disabled, it confuses the hell out of me :)`
`21:38.29`	`PMantis`	`Heh`
`21:38.37`	`smackus`	`Strom_C: well, that did not change the outbound caller id name.`
`21:38.39`	`dlynes_office`	`dandan: now, i can't remember offhand`
`21:38.46`	`dlynes_office`	`dandan: inbound was working, but not outbound?`
`21:38.57`	`dandan`	`dlynes_office: that is correct`
`21:39.12`	`Strom_C`	`smackus: I don't understand why it would anyway, because according to the ISDN spec, you should not be able to do that.`
`21:39.20`	`dlynes_office`	`dandan: comment out your prilocaldialplan field; see if that fixes it`
`21:39.31`	`dandan`	`dlynes_office: they send me an extension inbound, for example: 500 and it rings :)`
`21:39.31`	`smackus`	`the same t1 plugged into the old system shows the name i am sending from the phone system. If i move the t1 to the asterisk box, it shows the name set up by ACC`
`21:39.45`	`Strom_C`	`smackus: you using a digium card?`
`21:39.49`	`smackus`	`yes`
`21:39.52`	`PMantis`	`Hmmm, is /var/run volatile? I had and asterisk dir there for pid stuff, etc.`
`21:39.52`	`Strom_C`	`call support`
`21:40.02`	`dlynes_office`	`PMantis: of course it is`
`21:40.03`	`dandan`	`dlynes_office: ok, hold on`
`21:40.19`	`dlynes_office`	`PMantis: directories and files get created and deleted there all the time`
`21:40.24`	`dandan`	`PMantis: no, it shouldn't be...`
`21:40.39`	`dlynes_office`	`PMantis: /var/run itself isn't volatile, but its contents are`
`21:40.47`	`dandan`	`there you go :)`
`21:40.51`	`dandan`	`you beat me to it`
`21:40.51`	`CunningPike`	`PMantis: No - if you create an 'asterisk' subdir and specify that in your Makefile, it should stick`
`21:40.52`	`PMantis`	`dlynes_office, Wasn't quite "of course" to me..`
`21:40.57`	`PMantis`	`but thanks for confirming suspicions.`
`21:40.59`	`PMantis`	`:)`
`21:41.00`	`dandan`	`restart now`
`21:41.02`	`dandan`	`oops`
`21:41.08`	`dandan`	`:)`
`21:41.08`	`PMantis`	`lol`
`21:41.20`	`dandan`	`waaaay too many windows :)`
`21:41.23`	`dlynes_office`	`PMantis: well, probably what CunningPike has said, too`
`21:41.50`	`clyrrad`	`does anyone know where teh ast_load function is delcared?`
`21:41.54`	`dlynes_office`	`PMantis: but again, whatever in that /var/run/asterisk directory will be volatile`
`21:42.10`	`dandan`	`dlynes_office: nope, doesn't work...`
`21:42.17`	`dandan`	`wanna see the output from the CLI`
`21:42.19`	`dandan`	`?`
`21:42.27`	`dlynes_office`	`dandan: let's see your dial command in your extensions.conf file`
`21:42.54`	`dlynes_office`	`dandan: you can just paste the dial command to this channel`
`21:43.00`	`dlynes_office`	`dandan: not the whole context`
`21:44.07`	`dandan`	`dlynes_office: http://pastebin.ca/65264`
`21:45.21`	`*** join/#asterisk Strom_C (n=strom@gateway.digium.com)`
`21:45.33`	`Strom_C`	`man, what is with screen today?`
`21:45.33`	`dlynes_office`	`dandan: Dial(Zap/g1/18X0X245X00) is what it should be, I believe`
`21:45.44`	`dandan`	`g1? hm...`
`21:45.56`	`dlynes_office`	`dandan: because you're using a channel group`
`21:46.13`	`dandan`	`yeah, let's try... I just wanted to go out on a single channel`
`21:46.31`	`dlynes_office`	`dandan: you will, but it'll grab the first available channel from 1-23`
`21:46.59`	`dandan`	`yes, that's what i thought...`
`21:47.08`	`*** join/#asterisk trelane (i=trelane@66.93.203.199)`
`21:47.49`	`KranZ`	`http://www.dailytech.com/article.aspx?newsid=2813`
`21:47.52`	`dandan`	`dlynes_office: still same error...`
`21:48.08`	`dlynes_office`	`dandan: hrm...maybe [TK]D-Fender might know then`
`21:48.25`	`dlynes_office`	`dandan: i don't know at this point if it's a problem with your asterisk setup, or a problem with your sangoma card`
`21:48.27`	`dandan`	`dlynes_office: thanks for all your help`
`21:48.46`	`dandan`	`they told me to get rid of progress indicator field...`
`21:48.50`	`dandan`	`in my setup`
`21:49.10`	`dlynes_office`	`dandan: lemme see how i've got it set up on my te405p`
`21:49.17`	`[TK]D-Fender`	`?`
`21:50.02`	`dlynes_office`	`ruh roh`
`21:50.09`	`dlynes_office`	`now you've gone and angered the sangoma gods`
`21:50.22`	`[TK]D-Fender`	`HULK SMASH!!!`
`21:50.27`	`dlynes_office`	`lol`
`21:50.44`	`*** join/#asterisk Jon335 (i=Jon335@unaffiliated/jon335)`
`21:50.45`	`dandan`	`sangoma works`
`21:50.54`	`[TK]D-Fender`	`dandan : Trying to force local 7 digit as 11 digit will get you rejected on your PRI....`
`21:50.55`	`dandan`	`it has been configured by David from Sangoma, CANADA`
`21:51.07`	`dlynes_office`	`dandan: David Yat Sing?`
`21:51.14`	`dandan`	`I do not know, ext. 119`
`21:51.20`	`smackus`	`ok, I think I understand how to do this now... the number associates with the nation database and give it a name... got it now.`
`21:51.28`	`dlynes_office`	`yeah...David Yat Sing, or Yat Sin....can't remember which`
`21:51.32`	`dandan`	`i think he sounded like an indian guy, EXTREMELY HELPFUL`
`21:51.58`	`Jon335`	`Has anyone tried the D-Link DVG-2001S?`
`21:52.22`	`dlynes_office`	`dandan: try adding busydetect=no, callprogress=no to your zapata.conf file`
`21:52.33`	`*** join/#asterisk Dibbler_ (n=Dibbler@snaddy.plus.com)`
`21:52.46`	`dandan`	`dlynes_office: ok, hold on`
`21:53.14`	`dlynes_office`	`dandan: and make sure prilocaldialplan=local is still commented out`
`21:53.35`	`dandan`	`yes, it still is`
`21:53.56`	`dlynes_office`	`dandan: or maybe that's what [TK]D-Fender was talking about`
`21:54.23`	`dandan`	`dlynes_office: there is progress...`
`21:54.31`	`dandan`	`the call has been completed...`
`21:54.32`	`dandan`	`meaning:`
`21:54.36`	`[TK]D-Fender`	`you shouldn't have to even TALK about call progress... and if its an issue at all I'm betting he's got an analog T1 and not a fractional PRI.`
`21:54.40`	`dandan`	`Requested transfer capability: 0x00 - SPEECH`
`21:54.40`	`dandan`	`<PROTECTED>`
`21:54.42`	`asterboy`	`zaptel: version magic '2.6.11.12 preempt K6 4KSTACKS gcc-3.4' should be '2.6.11.12 preempt PENTIUMIII 4KSTACKS gcc-3.4'`
`21:55.02`	`dlynes_office`	`[TK]D-Fender: why would 10 digit dialing for local numbers be an issue?`
`21:55.21`	`asterboy`	`Getting this message when I try to boot.`
`21:55.47`	`asterboy`	`Any suggestions? zaptel: version magic '2.6.11.12 preempt K6 4KSTACKS gcc-3.4' should be '2.6.11.12 preempt PENTIUMIII 4KSTACKS gcc-3.4'`
`21:55.52`	`dlynes_office`	`dandan: so did it work? were you able to talk to anyone on the other end of that call?`
`21:56.01`	`dandan`	`no, it gives me silence...`
`21:56.06`	`dlynes_office`	`cool!`
`21:56.12`	`dandan`	`yeah, very... :)`
`21:56.18`	`*** join/#asterisk r0d3nt (n=RatMan@ip68-108-184-243.lv.lv.cox.net)`
`21:56.27`	`dlynes_office`	`better than an error, isn't it?`
`21:56.40`	`[TK]D-Fender`	`dlynes_office : He was dialing 11 digits for LOCAL calls.. the PRI would usully rejects this an a non-valid format for the target`
`21:56.46`	`dlynes_office`	`ah`
`21:56.54`	`dandan`	`[TK]D-Fender: ah!`
`21:57.15`	`dlynes_office`	`dandan: ok, so that begs the question...why would you be doing 11 digit dialing for local calls?`
`21:57.38`	`dandan`	`that's what vendor guidelines suggested...`
`21:57.43`	`*** join/#asterisk eKo1 (n=bernd@190.4.7.90)`
`21:57.43`	`dandan`	`sent to me by ctc...`
`21:57.44`	`dlynes_office`	`vendor?`
`21:57.57`	`dlynes_office`	`I thought you were the vendor?`
`21:58.15`	`dandan`	`no, that's the name for all tech stuff CTC sends you`
`21:58.20`	`dandan`	`(CTC - clec)`
`21:58.35`	`dlynes_office`	`good clec`
`21:58.52`	`dandan`	`[TK]D-Fender: !`
`21:58.53`	`dandan`	`:)`
`21:59.00`	`eKo1`	how come `sip show inuse' for one of my extensions shows a different number than what I count with sip show channels?
`21:59.10`	`[TK]D-Fender`	`Dialing 7 as 10 = OK, as 11 = recipe for disaster`
`21:59.12`	`dandan`	`my sangoma restarts all channels twice...`
`21:59.13`	`eKo1`	`Which number should I trust?`
`21:59.15`	`*** join/#asterisk RoyK (n=roy@122.80-203-78.nextgentel.com)`
`21:59.16`	`dlynes_office`	`i usually don't listen to stupid advice, if it sounds like stupid advice`
`21:59.18`	`dandan`	`OH!!!!`
`21:59.20`	`dandan`	`right!`
`21:59.22`	`dandan`	`10 vs. 11...`
`21:59.25`	`dandan`	`bleh!`
`21:59.27`	`dandan`	`gotta go home :/`
`21:59.46`	`dlynes_office`	`ah...so clec never told him...he told himself that :P`
`22:00.05`	`dandan`	`yeah, they mentioned 10 vxs. 11...`
`22:00.06`	`dandan`	`:)`
`22:00.16`	`dandan`	`but it is still not an issue... :/`
`22:00.37`	`dlynes_office`	`dandan: try calling your cellphone`
`22:00.46`	`asterboy`	`Need help.`
`22:00.48`	`dlynes_office`	`dandan: that way you know what both ends of the conversation sound like`
`22:00.55`	`dandan`	`dlynes_office: no difference...`
`22:00.57`	`dlynes_office`	`dandan: then you've got a better idea where to proceed next`
`22:00.59`	`asterboy`	`When I run a modprobe wctdm, I get this:`
`22:01.00`	`asterboy`	`WARNING: Error inserting zaptel (/lib/modules/2.6.11.12/misc/zaptel.ko): Invalid module format`
`22:01.13`	`asterboy`	`How can I correct that?`
`22:01.14`	`smackus`	`ok, so back to an old question that I have not figured out yet...`
`22:01.14`	`smackus`	`I want to SetVar(CALLFILENAME=${here is where my question lies}`
`22:01.14`	`dandan`	`no, still back to where we started...`
`22:01.21`	`dandan`	`asterboy: recompile zaptel...`
`22:01.31`	`dlynes_office`	`asterboy: you're using a different compiler version or kernel version to compile the modules with than the kernel that's installed`
`22:01.46`	`asterboy`	`yep, that sounds like the issue`
`22:01.47`	`smackus`	`I want this variable to show 3505 as in the extension... example: exten => 3503,1,Dial(SIP/PTSTest3,20)`
`22:01.49`	`[TK]D-Fender`	`Ok, I'm outta here, back LATE`
`22:01.52`	`dlynes_office`	`asterboy: type cat /proc/version`
`22:01.56`	`dandan`	`dlynes_office, [TK]D-Fender: thank you both... I am going home`
`22:01.58`	`asterboy`	`cat /proc/version`
`22:02.04`	`asterboy`	`:P`
`22:02.07`	`dlynes_office`	`asterboy: that'll tell you which kernel version is installed, and it'll tell you what compiler version was used`
`22:02.10`	`dandan`	`dlynes_office: we will follow up tomorrow...`
`22:02.28`	`asterboy`	`Linux version 2.6.11.12 (root@hylafax) (gcc version 3.4.3)`
`22:02.37`	`dandan`	`thanks anyway...`
`22:02.38`	`dandan`	`:)`
`22:02.38`	`dlynes_office`	`asterboy: now type gcc --version`
`22:03.29`	`*** join/#asterisk freebsd_fan (n=ebola@i-83-67-73-117.freedom2surf.net)`
`22:03.29`	`asterboy`	`gcc (GCC) 3.4.3`
`22:03.29`	`dlynes_office`	asterboy: and now ls -al /lib/modules/`uname -a`/build
`22:03.29`	`*** join/#asterisk Qwell[] (i=north@unaffiliated/qwell)`
`22:03.29`	`smackus`	`{CALLERIDNUM} sets the number specified as setcallerid`
`22:03.33`	`smackus`	`but i need to use the variable to specify extension.`
`22:03.58`	`smackus`	`i could just send the caller id as the extension, but i want the number to display, not the extension.`
`22:04.10`	`dlynes_office`	`smackus: {CALLERID(num)}`
`22:04.16`	`dlynes_office`	`smackus: CALLERIDNUM is deprecated`
`22:04.27`	`smackus`	`thats what I meant... sorry`
`22:05.06`	`dlynes_office`	`smackus: could you reword your question? It's not making any sense`
`22:05.15`	`smackus`	`yeah, i know... sorry.`
`22:05.22`	`asterboy`	`.`
`22:05.43`	`dlynes_office`	`smackus: i understand English is probably not your native language, that's why i'm asking you to try rewording it`
`22:06.05`	`*** join/#asterisk adorah (n=Asterjet@87.69.72.228)`
`22:06.05`	`smackus`	`rewording... hang on`
`22:06.22`	`smackus`	`ok, when I call someone outside the office, I need it to show my 800 number. Got that all worked out. But I am recording my calls and creating a file name based on variables set in the extensions.conf.`
`22:06.23`	`dlynes_office`	`smackus: even if it's still not good English, I might still be able to get the gist of it`
`22:06.39`	`smackus`	`part of that file name needs to be the extension that they are calling from.`
`22:07.03`	`smackus`	`the part I am stuck on is that I can set the caller id, but not specify in a variable how to identify the extension they are at when they call.`
`22:07.10`	`smackus`	`there are 5 extensions all with the same caller id.`
`22:07.11`	`dlynes_office`	`smackus: by extension, do you mean caller id number, or their extension on their local phone system, that is not part of your phone system?`
`22:07.25`	`smackus`	`local extension.`
`22:07.33`	`dlynes_office`	`smackus: you're not able to pass that or get it`
`22:07.39`	`dlynes_office`	`smackus: it's technically impossible`
`22:07.54`	`smackus`	`ok, can you offer some suggestions?`
`22:07.57`	`dlynes_office`	`smackus: unless their pbx and your pbx are both running asterisk`
`22:08.05`	`*** join/#asterisk Qwell[] (i=north@unaffiliated/qwell)`
`22:08.06`	`smackus`	`here is my end result I need.`
`22:08.06`	`dlynes_office`	`smackus: and their pbx is running on a pri`
`22:08.36`	`*** join/#asterisk rene- (n=rene-@dsl-200-67-175-250.prod-empresarial.com.mx)`
`22:08.56`	`smackus`	`I need to record calls... working. I need to send caller id... working I need to identify that call recordings as to which extension it was made from... not working.`
`22:09.03`	`smackus`	`any suggestions on a better approach?`
`22:09.23`	`dlynes_office`	`smackus: your callers are calling from a non-asterisk pbx, right?`
`22:09.45`	`smackus`	`Asterisk users are calling outbound to residential phones`
`22:09.52`	`smackus`	`outbound call center`
`22:10.10`	`dlynes_office`	`ok, and the residential phones need to know what extension at your call center has called them?`
`22:10.22`	`smackus`	`no`
`22:10.35`	`dlynes_office`	`exactly`
`22:10.45`	`smackus`	`I need match call recordings to the extension that the call was made from`
`22:10.46`	`dlynes_office`	`the residential phones have nothing to do with what you're talking about, do they?`
`22:11.25`	`dlynes_office`	`oh...wait...I think I understand what you're getting at`
`22:11.32`	`dlynes_office`	`There's only one pbx in this equation, right?`
`22:11.38`	`dlynes_office`	`and it's an Asterisk pbx?`
`22:11.38`	`smackus`	`this is hard to explain, I am sorry.`
`22:11.42`	`smackus`	`yes`
`22:12.10`	`smackus`	`calling out from the asterisk pbx i need to send my 800 number as the caller id, that is working correctly.`
`22:12.16`	`dlynes_office`	`Ok, and it's making calls out to residential surveyees or solicitees through a pri?`
`22:12.54`	`*** part/#asterisk mog (i=ejabberd@68.62.237.103)`
`22:12.55`	`smackus`	`but I only can figure out how to use the caller id number as a variable to name my call recording files. I would like to use the 4 digit extension that they are calling from`
`22:13.08`	`smackus`	`dlynes_office:correct`
`22:13.11`	`dlynes_office`	`smackus: forget about the call recording for now`
`22:13.14`	`smackus`	`ok`
`22:13.20`	`dlynes_office`	`smackus: ok, now that we've got that clarified`
`22:13.52`	`dlynes_office`	`smackus: all that's missing is that when you do a call recording, you want to know which extension is making the call, so that you can generate a filename for the file`
`22:13.58`	`dlynes_office`	`smackus: correct?`
`22:14.02`	`smackus`	`correct.`
`22:14.51`	`asterboy`	`dlynes_office, what am I looking for with the ls -al in /lib/modules/2.6.11.12/build ?`
`22:15.21`	`Qwell[]`	`asterboy: to see if it points to the right source dir`
`22:15.23`	`dlynes_office`	`asterboy: to see if it actually links to an existing directory and also that the directory is kernel headers and/or kernel source`
`22:15.35`	`dlynes_office`	`asterboy: and also that it's the correct directory`
`22:16.19`	`dlynes_office`	`smackus: what you want to examine is the ${CHANNEL} variable`
`22:16.21`	`Qwell[]`	You guys ever heard anything about `uptime` wrapping around after like a year and a half, on Linux?
`22:16.38`	`smackus`	`ok.. will do, thanks.`
`22:16.44`	`Qwell[]`	`box has been up for 481 days, but uptime shows...6`
`22:16.52`	`dlynes_office`	`smackus: you'll want to break it down so that you're only accessing the part of the channel variable that contains the extension that's being called from`
`22:16.55`	`asterboy`	`ok, looks good.`
`22:17.04`	`dlynes_office`	`smackus: and then use that to create your filename for the monitoring`
`22:17.16`	`dlynes_office`	`Qwell[]: cool`
`22:17.20`	`dlynes_office`	`Qwell[]: type date`
`22:17.24`	`asterboy`	`it lists the filesm but not sure if it is the correct directory`
`22:17.28`	`Qwell[]`	`Tue Jun 13 17:17:27 CDT 2006`
`22:17.47`	`asterboy`	`The dates are correct`
`22:17.50`	`Qwell[]`	`/proc/uptime shows 481 days...`
`22:17.59`	`Qwell[]`	`573083.43 41579555.81`
`22:18.09`	`Qwell[]`	`the first one is 6 days, the second is "right"`
`22:18.35`	`asterboy`	`Do I possibly need to recompile my compiler?`
`22:19.02`	`asterboy`	`I did do a move from a Pentium III maching to a K6 box.`
`22:19.04`	`dlynes_office`	`Qwell[]: type hwclock?`
`22:19.13`	`asterboy`	`recompiled the kernel`
`22:19.20`	`asterboy`	`all looked good.`
`22:19.25`	`Qwell[]`	`dlynes_office: returned 127...probably some error`
`22:19.36`	`dlynes_office`	`Qwell[]: there's yoru problem right there, then`
`22:19.38`	`Qwell[]`	`don't feel like quitting irc again :p`
`22:19.40`	`dlynes_office`	`Qwell[]: well`
`22:19.45`	`asterboy`	`made sure make menuconfig had the K7 info in it, but my kernel headers may be out of sync.`
`22:19.49`	`dlynes_office`	`Qwell[]: did you run hwclock as root user?`
`22:19.57`	`Qwell[]`	`oh..no, heh`
`22:19.58`	`asterboy`	`How can I check that.`
`22:19.58`	`asterboy`	`?`
`22:20.05`	`dlynes_office`	`Qwell[]: try it as root user`
`22:20.10`	`file`	`and, offline I go`
`22:20.16`	`Qwell[]`	`meh, that means I have to get through the proxy again`
`22:20.23`	`dlynes_office`	`lol`
`22:20.41`	`dlynes_office`	`Qwell[]: what's wrong with using the 'su' command?`
`22:20.45`	`Qwell[]`	`Tue 13 Jun 2006 04:33:09 PM CDT -0.546851 seconds`
`22:21.08`	`dlynes_office`	`shurg...dunno...i never ssh as root`
`22:21.15`	`Qwell[]`	`I'm telling you...I think it just wrapped around, heh`
`22:21.17`	`dlynes_office`	`don't allow it either`
`22:21.18`	`Qwell[]`	`wtf`
`22:21.33`	`asterboy`	`Is there a way I can compile zaptel with some line commands to fix this error?`
`22:21.39`	`dlynes_office`	`Qwell[]: take a look at your hwclock again`
`22:21.49`	`Qwell[]`	`bah! I just closed it :P`
`22:21.50`	`dlynes_office`	`Qwell[]: and then take a look at date again`
`22:21.55`	`asterboy`	`the compile works with no problems.`
`22:22.00`	`Qwell[]`	`date still looks fine`
`22:22.04`	`dlynes_office`	`Qwell[]: you've got major drift happening there`
`22:22.17`	`Qwell[]`	`.5 seconds over a year and a half?`
`22:22.18`	`dlynes_office`	`Qwell[]: you haven't synced your hardware clock for quite some time`
`22:22.30`	`dlynes_office`	`Qwell[]: .5 seconds? heh...try again`
`22:22.31`	`Qwell[]`	`or...heh`
`22:22.38`	`klasstek`	`has anyone heard of lumenvox for tts/speech recognition on nix for ? If so has anyone used it? How does it compare to cepstral?`
`22:22.40`	`asterboy`	`but it is obviously creating my modules .ko files with the old kernel.`
`22:22.46`	`Qwell[]`	`alright, so 50 minutes`
`22:22.50`	`dlynes_office`	`Qwell: i see about 13 hours buddy`
`22:22.53`	`asterboy`	`Is there a way to manually override this?`
`22:23.00`	`Qwell[]`	`ooo...`
`22:23.03`	`Qwell[]`	`12:50`
`22:23.11`	`Qwell[]`	`okay, well, that still doesn't explain it :p`
`22:23.42`	`dlynes_office`	`it does if one's negative of the other one, and it's using signed integers :)`
`22:25.08`	`asterboy`	make[1]: Entering directory `/usr/src/linux-2.6.11.12'
`22:25.17`	`asterboy`	`looks like the correct source directory`
`22:25.19`	`*** join/#asterisk riddlebox (n=james@24-171-10-102.dhcp.stls.mo.charter.com)`
`22:25.25`	`asterboy`	`what next?`
`22:25.30`	*** join/#asterisk Lino` (n=Lino@i577BD2BA.versanet.de)
`22:26.02`	`dlynes_office`	`asterboy: make dep ; make bzlilo ; make modules ; make modules_install?`
`22:26.24`	`riddlebox`	`does anyone here manage asterisk boxes for customers?`
`22:26.39`	`dlynes_office`	`asterboy: and make sure your INSTALL_PATH in Makefile is deploying to the correct directory, too`
`22:26.43`	`dlynes_office`	`riddlebox: never`
`22:26.55`	`dlynes_office`	`riddlebox: customers always manage their own boxes`
`22:27.18`	`Jon335`	`Does anyone know about the GrandStream HandyTone 386? I'm wondering whether I can use the 2 FXS ports as seperate extensions.`
`22:27.48`	`justinu\|laptop`	`that's the general idea jon`
`22:27.51`	`dlynes_office`	`Jon335: that's what fxs ports are for`
`22:27.55`	`riddlebox`	`dlynes_office, our company has been asked to sell and provide support for a couple of asterisk boxes, but my boss doesnt really know how much to charge, its only like 4 phones on each all sip`
`22:28.15`	`dlynes_office`	`riddlebox: charge by the hour, then`
`22:28.19`	`*** join/#asterisk Inkubot (n=inkubot@200.74.182.64)`
`22:28.21`	`*** part/#asterisk rene- (n=rene-@dsl-200-67-175-250.prod-empresarial.com.mx)`
`22:28.23`	`Inkubot`	`jalo`
`22:28.31`	`Jon335`	`justinu\|laptop and dlynes_office, thanks ;)`
`22:28.38`	`Inkubot`	`i've got a hardware question`
`22:28.58`	`*** part/#asterisk AlexCTI (n=alex@adsl-074-238-025-003.sip.mia.bellsouth.net)`
`22:29.10`	`Inkubot`	`how long can be a phone attached to a ATA ?`
`22:29.10`	`Inkubot`	`an ATA?`
`22:29.28`	`dlynes_office`	`Inkubot: until the ATA burns out from age?`
`22:29.29`	`*** join/#asterisk angler (n=angler@pdpc/sponsor/digium/angler)`
`22:31.51`	`*** join/#asterisk backblue (n=moo@87-196-4-132.net.novis.pt)`
`22:32.57`	`*** part/#asterisk terrapen (n=cjs@166.70.183.108)`
`22:41.45`	`asterboy`	`sone of bitch...can't get past the fact that zaptel compiles with the old Pentium III code.`
`22:42.10`	`*** join/#asterisk Neptune__ (n=foo@zux221-166-031.adsl.green.ch)`
`22:42.14`	`asterboy`	`tried your suggestions to no avail dylnes_office`
`22:42.38`	`asterboy`	`maybe my linux source is the old`
`22:42.49`	`riddlebox`	`how do you guys recomend I upgrade to the newest version if I installed from source?`
`22:42.58`	`*** join/#asterisk nagl (n=nagl@86.59.54.237)`
`22:43.08`	`Qwell[]`	`riddlebox: install from source again`
`22:43.26`	`riddlebox`	`Qwell[], do I do make remove or uninstall from the old one?`
`22:43.42`	`Qwell[]`	`don't need to.. just clear out /var/lib/asterisk/modules/`
`22:43.56`	`riddlebox`	`ok thanks`
`22:44.49`	`riddlebox`	`hrrm I dont even have that dir`
`22:45.05`	`Qwell[]`	`oh`
`22:45.09`	`Qwell[]`	`/usr/lib/asterisk/modules`
`22:45.11`	`KranZ`	`asterboy do 'uname -a' and see if its i386`
`22:46.40`	`*** join/#asterisk joat (n=joat@144.202.228.194)`
`22:46.48`	`asterboy`	`it's as it should be, i686 athlon`
`22:46.54`	`KranZ`	`t38 has been committed to trunk`
`22:47.14`	`asterboy`	`err...wait, here is what it says:`
`22:47.15`	`asterboy`	`Linux hylafax 2.6.11.12 #3 Sat Nov 19 22:26:41 MST 2005 i686 athlon-4 i386 GNU/Linux`
`22:47.22`	`KranZ`	`doh`
`22:48.01`	`asterboy`	`ls`
`22:48.13`	`joat`	`argh! i'm finding out that installing * is much, much easier from scratch than it is from .debs or rpms`
`22:48.14`	`*** join/#asterisk nentis (n=nentis@hotblack.opensourcery.com)`
`22:48.41`	`Qwell[]`	`joat: well...yeah`
`22:48.45`	`Qwell[]`	`we could've told you that`
`22:49.10`	`riddlebox`	`joat, and it seems to work better too`
`22:49.19`	`joat`	`i tried to take a short cut using this 5 year-old laptop...`
`22:49.43`	`asterboy`	`uname does show me that the system is still using old kernel though.`
`22:50.03`	`asterboy`	`I just compiled and install an hour ago, so the compile date is wronf`
`22:50.11`	`joat`	`riddlebox, and a lot less crap gets installed/enabled`
`22:50.28`	`KranZ`	`make sure to update your default boot kernel in grub/lilo`
`22:50.34`	`KranZ`	`or pay attention when it boots`
`22:51.21`	`KranZ`	`asterboy: you set the processor type when compiling right?`
`22:51.32`	`KranZ`	`asterboy: (kernel)`
`22:53.46`	`asterboy`	`yes`
`22:53.51`	`asterboy`	`in make menuconfig`
`22:54.20`	`KranZ`	`k`
`22:56.27`	`asterboy`	`ok, redooing lilo fix it.`
`22:56.46`	`asterboy`	`the uname caught my attention.`
`22:56.57`	`asterboy`	`now that it has the proper kernel loading...all is good.`
`22:57.15`	`KranZ`	`coo`
`22:57.53`	`KranZ`	`bbt`
`22:59.02`	`*** join/#asterisk s34n (n=s34n@ip-206-159-190-125.mvdsl.com)`
`23:02.47`	`*** join/#asterisk Ariel_ (n=Ariel@dsl-20-177.cofs.net)`
`23:04.42`	`riddlebox`	`that was easy enough, upgraded to 1.2.9.1`
`23:06.21`	`BZBW`	`KranZ: when will t38 officially released? Will it be in 1.4?`
`23:06.38`	*** join/#asterisk Lino` (n=Lino@i577BD450.versanet.de)
`23:08.50`	`*** join/#asterisk endrin (i=daed@CPE-70-92-75-238.new.res.rr.com)`
`23:10.17`	`*** join/#asterisk Bullseye_Network (n=Kyle@216.143.192.69)`
`23:12.04`	`file`	`t38 passthrough is in trunk, and will be released in 1.4`
`23:15.34`	`*** join/#asterisk tlowe_ (n=tlowe@bgp.terrorist.net)`
`23:15.40`	`BZBW`	`file: so it's only passthrough?`
`23:15.57`	`file`	`right now? yes`
`23:16.39`	`*** join/#asterisk nexstar (n=nexstar@adsl-67-112-181-25.dsl.lsan03.pacbell.net)`
`23:16.40`	`dlynes_office`	`file: I think I hear BZBW volunteering to make it a transcoder :)`
`23:18.47`	`file`	`hehe`
`23:24.56`	`*** join/#asterisk adker (n=adker@74-33-195-209.br1.glv.ny.frontiernet.net)`
`23:28.02`	*** join/#asterisk Lino` (n=Lino@i577BD364.versanet.de)
`23:29.33`	`*** join/#asterisk znoG (n=gs@205-17-235-201.fibertel.com.ar)`
`23:30.01`	`ids2500`	`t38 passthrough doesn't work though`
`23:30.08`	`*** part/#asterisk mountainm2k (n=mountain@cbit-98.bullseye9.com)`
`23:31.59`	`dlynes_office`	`Pentium 75 - 200 with 32MB's of RAM and the f00f bug...`
`23:32.21`	`*** join/#asterisk DaPrivateer (n=matt7229@gateway.66fruit.com)`
`23:32.22`	`dlynes_office`	`That machine's sufficient to run an x100p card and one sipura 2000 unit, right?`
`23:32.31`	`dlynes_office`	`if everything's ulaw?`
`23:32.49`	`PMantis`	`dlynes_office, Sounds like the perfect machine to push 200 calls through. :)`
`23:33.07`	`dlynes_office`	`PMantis: it's just for a home pbx for blacklisting incoming calls for the boss`
`23:33.11`	`asterboy`	`Anyone have Sangoma cards not recognize on boot.`
`23:33.19`	`asterboy`	`I have the software installed.`
`23:33.38`	`dlynes_office`	`asterboy: what particular sangoma card?`
`23:33.41`	`asterboy`	`But /proc/interrupts and lspci don't even show the card`
`23:33.44`	`asterboy`	`A200`
`23:33.46`	`PMantis`	`dlynes_office, I've never tried to use that small of a machine, so i can't comment.. but I couldn't resist humor. :)`
`23:34.00`	`dlynes_office`	`asterboy: do an lspci -v, and see if you have an nec network card listed`
`23:34.02`	`asterboy`	`tried every pci slot`
`23:34.15`	`asterboy`	`lspci -v \|more`
`23:36.45`	`mitcheloc`	`are there any docs around explaining how t.38 passthrough works?`
`23:36.48`	`asterboy`	`no nec card listed`
`23:37.06`	`*** part/#asterisk nentis (n=nentis@hotblack.opensourcery.com)`
`23:37.08`	`dlynes_office`	`asterboy: any network cards listed, period?`
`23:38.11`	`file`	`ids2500: we tested it between two Sipuras, and it worked fine`
`23:38.14`	`asterboy`	`yes`
`23:38.25`	`asterboy`	`there is an eth0 which is correct`
`23:38.27`	`file`	`we tested it between two Grandstreams, didn't work fine... so it's up to the implementation, they are very diverse and some just plain suck`
`23:38.37`	`dlynes_office`	`asterboy: besides the ones you're expecting?`
`23:38.41`	`asterboy`	`no`
`23:38.45`	`asterboy`	`just the one`
`23:38.58`	`asterboy`	`it seems as though BIOS is not showing it`
`23:38.58`	`dlynes_office`	`asterboy: pastebin your lspci -v then?`
`23:39.02`	`asterboy`	`dmidecode \|more`
`23:40.17`	`dlynes_office`	`asterboy: is there a reason you keep typing linux commands out to the chat channel?`
`23:42.14`	`asterboy`	`lol, ya cause I'm pulling my hair out and need a beer`
`23:42.51`	`dlynes_office`	`umm...I thought in edmonchuck, you guys smoked pot, instead of drinking beer?`
`23:43.13`	`asterboy`	`http://pastebin.ca/65309`
`23:43.35`	`asterboy`	`how are suppose to cool your throat?`
`23:43.55`	`*** part/#asterisk mitcheloc (n=mitchelo@70-32-188-167.lmdaca.adelphia.net)`
`23:44.08`	`xachen`	`dlynes_office: I'm 2 hours away from Edmonchuck :P`
`23:44.10`	`dlynes_office`	`yeah...it looks like you might have a bad pci slot where you're plugging it into, or it's not plugged in all the way`
`23:44.13`	`xachen`	`we prefer beer over pot`
`23:44.17`	`xachen`	`but have the occasional raid!`
`23:44.21`	`dlynes_office`	`heh`
`23:44.35`	`asterboy`	`ya, beer is good`
`23:44.43`	`asterboy`	`ice cold and frosty`
`23:45.03`	`asterboy`	`Don't get it.`
`23:45.05`	`dlynes_office`	`so're you able to get kokanee in alberta?`
`23:45.27`	`asterboy`	`Isn't that from the Kootneys which is Alberta?`
`23:45.37`	`dlynes_office`	`kootenays which is in bc`
`23:46.54`	`dlynes_office`	`asterboy: have you tried plugging it into a different pci slot?`
`23:47.06`	`ids2500`	`<mitcheloc> are there any docs around explaining how t.38 passthrough works?`
`23:47.08`	`ids2500`	`it doesn't work`
`23:47.18`	`asterboy`	`every one`
`23:47.22`	`dlynes_office`	`asterboy: also have you checked to make sure it's fully seated properly in the slot?`
`23:47.33`	`asterboy`	`yes`
`23:47.39`	`asterboy`	`I used a hammer`
`23:47.54`	`dlynes_office`	`asterboy: i'd send it back then, and get them to send you a new one, on their shipping dime`
`23:47.54`	`asterboy`	`oh wait...maybe that's why it's not working anymore :P`
`23:48.02`	`asterboy`	`back to pot`
`23:48.17`	`asterboy`	`ya, I'll try it in another machine just to make sure.`
`23:48.42`	`asterboy`	`And I did have a little bird on my shoulder telling me to bring the other just in case.`
`23:48.47`	`dlynes_office`	`asterboy: heh...nvm...one of the most common postal code prefixes in southern ontario is P0T ...`
`23:48.56`	`asterboy`	`lol`
`23:49.00`	`asterboy`	`That should be in BC`
`23:49.06`	`dlynes_office`	`heh`
`23:49.13`	`asterboy`	`Canada's #1 cash crop`
`23:49.25`	`drray`	`I need to go to BC to pick up some more codeine flavored aspirin`
`23:49.25`	`dlynes_office`	`prolly more pot grown in ontario than bc`
`23:49.27`	`justinu\|laptop`	`yay canada`
`23:49.32`	`dlynes_office`	`but bc's is higher grade and more popular`
`23:49.38`	`file`	`ids2500: it was tested in the Digium office earlier today with two SPA2100 ATAs and it worked, now - what devices are you using that it does not work with?`
`23:49.56`	`justinu\|laptop`	`yay SPA2100`
`23:50.19`	`dlynes_office`	`justinu's had a few too many beers already today`
`23:51.21`	`dlynes_office`	`anyways`
`23:51.40`	`justinu\|laptop`	`i wish`
`23:51.50`	`justinu\|laptop`	`i was just proclaiming my love for canada and spa2100s`
`23:52.00`	`twisted[asteria]`	`blame canada`
`23:52.02`	`twisted[asteria]`	`(aka file)`
`23:52.11`	`file`	`yup, all my fault`
`23:52.18`	`dlynes_office`	`i'm guessing a p75 - 200 w/32MB's of memory is sufficient for one zaptel incoming line, and one sipura 2000 port?`
`23:52.24`	`dlynes_office`	`if everything's running ulaw?`
`23:52.30`	`justinu\|laptop`	`spa2100 runs my phones at home, and canada rules for providing such a wonderful crop`
`23:53.01`	`twisted[asteria]`	`lol`
`23:55.51`	*** join/#asterisk trelane` (i=trelane@66.93.203.199)
`23:56.24`	`*** join/#asterisk mog (i=ejabberd@68.62.237.103)`

Generated by irclog2html.pl by Jeff Waugh - find it at freshmeat.net! Modified by Tim Riker to work with blootbot logs, split per channel, etc.