| 00:02.11 | *** join/#asterisk hyphen (n=hyphen@71.224.213.97) |
| 00:08.21 | *** join/#asterisk znoG (n=gs@201.235.148.162) |
| 00:09.34 | *** join/#asterisk zotz (n=zotz@24.244.163.225) |
| 00:19.07 | *** join/#asterisk perm_confused (n=ARF@24-148-32-14.nwb-bsr1.chi-nwb.il.cable.rcn.com) |
| 00:23.07 | perm_confused | Anyone knowledgeable about TDM40B and x100P cards answer a relatively simple question? The knowledgebase was clear on the setting, but not what the settings indicate. |
| 00:23.39 | bhrobinson | a question I might be able to answer.... I am still new, but will give it a try |
| 00:23.42 | *** join/#asterisk aao_pwner (n=aao_pwne@c-24-21-91-140.hsd1.wa.comcast.net) |
| 00:25.24 | perm_confused | it indicates that if you have more then 1 card you should "add the channels" and change the channels for the TDM card, but does the channels in /etc/zaptel.conf tie directly to the channels in /etc/asterisk/zapata.conf? |
| 00:26.17 | perm_confused | actually I only have two modules on the TDM40B in slot 1-2 and I was reading the O'Reilly docs and it seem to cordinate the channels with the slot numbers. |
| 00:28.17 | perm_confused | if that was to convoluted I can try again to explain, I've been reading all day and my brain is a little fuzzy |
| 00:28.51 | bhrobinson | ok, simple rules.... |
| 00:29.02 | bhrobinson | the analog card always comes first. |
| 00:29.17 | bhrobinson | then it starts with 1 - 4 on the 400 card |
| 00:29.23 | bhrobinson | and so on from there |
| 00:29.41 | bhrobinson | to ensure your order, check the zttool and it will tell you the order your cards are in |
| 00:30.26 | bhrobinson | and just so it does not hit you later, as it did me... if you have a 400 and then say a te210p, you off the ports by the number... |
| 00:30.39 | bhrobinson | i.e. 400 will be ports 1 - 4 |
| 00:30.55 | bhrobinson | then the 210 port 1 will be 5-29 |
| 00:33.49 | bhrobinson | make sense? |
| 00:33.56 | perm_confused | gotcha, thank you for the help. I was going about it backward |
| 00:34.43 | bhrobinson | just feel honored I actually knew how to answer a question <grin> been bothering these guys for 2 months now |
| 00:34.56 | perm_confused | heh |
| 00:42.20 | *** join/#asterisk Dr-Linux (n=Linux@202.59.73.131) |
| 00:44.03 | *** join/#asterisk damanivu (n=damanivu@ip68-4-207-173.oc.oc.cox.net) |
| 00:49.46 | *** join/#asterisk rishaan (n=rishaan@c-67-160-249-95.hsd1.ca.comcast.net) |
| 00:50.34 | rishaan | folks, can someone point to a large scale asterisk deployment with clustering support ? |
| 00:50.45 | rishaan | would prefer a detailed instructions/help |
| 00:50.59 | rishaan | ideally, i would like SER followed by a cluster of asterisk on solaris 10 |
| 00:51.17 | rishaan | any help/pointer ?? appreciate the responses |
| 00:51.36 | damanivu | I am looking |
| 00:52.09 | damanivu | I just came back from the Internet Telephony conference in San Diego. I believe I saw one. |
| 00:52.49 | rishaan | is there anyone who is willing to help build the network (and has the prior experience setting it up) |
| 00:53.06 | rishaan | PM me and we can talk the terms.... |
| 00:53.39 | rishaan | 4 asterisk boxes, 2 SER in HA mode and a 2 web-servers (HA mode) |
| 00:53.52 | damanivu | Nope not me then. Sorry. |
| 00:54.27 | rishaan | in the mean time, i can dig through the documents if you have any pointers |
| 00:59.33 | rishaan | this channel is awefully quite? Wonder if i got disconnected :-( |
| 00:59.44 | damanivu | Nope |
| 00:59.46 | damanivu | Still here |
| 01:00.08 | damanivu | I could not find anything through all the flyers. Sorry. |
| 01:00.27 | rishaan | thanks for looking. |
| 01:00.41 | rishaan | was there a company/consultants offering such solution? |
| 01:01.24 | damanivu | Yes, but I do not believe I picked up their flyer. |
| 01:06.37 | damanivu | Here is the link for the exhibitors: http://www.tmcnet.com/voip/conference/CA06/sd06-exhibit-now.htm#information |
| 01:09.44 | *** join/#asterisk Iamnacho (i=Iamnacho@ip68-103-140-124.ks.ok.cox.net) |
| 01:10.39 | *** join/#asterisk JunK-Y (n=junky@modemcable205.175-81-70.mc.videotron.ca) |
| 01:16.08 | El_Maestro | A've got a newbie question if I may bother you gurus. |
| 01:17.19 | El_Maestro | I've set up * under OS X, (or at least I think) I used an assistant to setup FWD, and downloaded xlite to a different PC. What configfile should I modify to add the softphone? |
| 01:17.35 | El_Maestro | I'm still a bit confused with this, extension/sip files |
| 01:18.51 | damanivu | k hold let me pull it up. |
| 01:21.32 | damanivu | I will get you a screen shot of my config using XLITE. |
| 01:22.00 | *** join/#asterisk riddlebox (n=james@24-171-10-102.dhcp.stls.mo.charter.com) |
| 01:22.15 | El_Maestro | thanks :) I still don't fully grasp the concepts of *. |
| 01:24.07 | dmz | hey again, i'm trying to understand queue repeats vs timeouts. if I set a timeout to say 180s (queue(id,,,180) and have internal queue timeotu to 10 after it tries the agents lines 1 time it drops out (i'm calling queue with 'n', no retry). If I don't have 'n' it never gives up retry and can't ever break out |
| 01:24.30 | dmz | also the 'H' option, can i tell it if someone hits '*' to drop out of queue, not to hangup? |
| 01:25.33 | damanivu | Here is a site: http://chayden.net/Asterisk/SeUpAsteriskAtHome.htm |
| 01:25.42 | damanivu | This one helped me a lot with XLITE |
| 01:26.08 | El_Maestro | thanks, damanivu, I'll give it a read. :) |
| 01:26.17 | *** join/#asterisk alexmontoanelli (n=alexm@alexmm.unetvale.com.br) |
| 01:26.19 | damanivu | Also, can you get into Asterisk CLI ? |
| 01:26.35 | damanivu | You can run SIP DEBUG to see what is going on |
| 01:27.07 | El_Maestro | oh.. how? |
| 01:27.22 | *** part/#asterisk alexmontoanelli (n=alexm@alexmm.unetvale.com.br) |
| 01:27.51 | damanivu | I have not tried it on OS X but, when you are in root, type: asterisk -r |
| 01:28.06 | damanivu | this should bring up the asterisk console |
| 01:28.13 | El_Maestro | lemesee... :) |
| 01:30.30 | El_Maestro | hmm I get : Unable to connect to remote asterisk |
| 01:31.59 | damanivu | does /var/run/asterisk.ctl exist? |
| 01:32.50 | El_Maestro | yup |
| 01:34.05 | damanivu | I do not believe your Asterisk is running then. |
| 01:34.26 | El_Maestro | lol... figures |
| 01:35.03 | damanivu | *thinking* |
| 01:36.13 | damanivu | if you type in root: ps -ax | grep asterisk |
| 01:36.18 | damanivu | does anything come up? |
| 01:36.28 | El_Maestro | lemesee |
| 01:37.02 | riddlebox | is there a way to make sure asterisk can connect to broadvoice, once in a while I get an error saying it cant connect and it could be a dns problem? |
| 01:37.23 | El_Maestro | it says.. 8686 std S+ ):00.01 grep asterisk |
| 01:37.50 | El_Maestro | it says.. 8686 std S+ 0:00.01 grep asterisk |
| 01:37.51 | damanivu | riddlebox - Not familiar with Broadvoice. Only teliax. Sorry. |
| 01:38.12 | riddlebox | <PROTECTED> |
| 01:38.16 | riddlebox | I get that error? |
| 01:38.37 | dmz | so a via processor isn't the best to run an * queue system on :) |
| 01:38.37 | damanivu | El_Maestro - Your Asterisk is not running at all |
| 01:38.56 | *** join/#asterisk stkn (n=stkn@gentoo/developer/pdpc.active.stkn) |
| 01:38.56 | El_Maestro | damn.. the asistant said it was |
| 01:39.35 | damanivu | It does not look like it as it is not in any of your processes. |
| 01:39.37 | damanivu | Try this |
| 01:40.16 | teknoprep | hmmm |
| 01:40.24 | damanivu | type: /usr/sbin/asterisk -vvvgc |
| 01:40.27 | teknoprep | i have to sit down and read the damn * book |
| 01:40.47 | damanivu | teknoprep - It is now free! Woo hooo! |
| 01:40.57 | teknoprep | its always been hasn't |
| 01:41.10 | damanivu | Nope |
| 01:41.15 | teknoprep | oh |
| 01:41.23 | DrkShdw | dmz: if you aren't having asterisk do the encoding, a VIA should be fine (for instance, if you are hooking it up to a voip gateway box, or something |
| 01:41.24 | rishaan | does the book contains a chapter on asterisk clustering??? |
| 01:41.27 | teknoprep | i just don't have the time.. but i have to |
| 01:41.31 | damanivu | I am old school. I need a book in my hands when I am sitting on the throne |
| 01:41.52 | teknoprep | lol i don't sit on the throne long... don't have enough time |
| 01:42.05 | El_Maestro | well something happened because my terminal window dissapeared... |
| 01:42.07 | damanivu | sorry to hear that :-( |
| 01:42.28 | damanivu | Hmm. I hope it is a box you can afford hack. |
| 01:42.41 | damanivu | *to* |
| 01:42.43 | El_Maestro | lol, something went wrong because it quited on me haha |
| 01:43.26 | teknoprep | hmmm |
| 01:43.59 | El_Maestro | damanivu.. I really appreciate your help.. Ive got to run, .. got a wedding to assist. |
| 01:44.10 | El_Maestro | I'll be back, thanks :) |
| 01:44.14 | damanivu | n/p |
| 01:44.23 | *** join/#asterisk windygeek (n=support@206.mui23.chcg.cgcil02r18.dsl.att.net) |
| 01:44.58 | *** join/#asterisk tzafrir (n=tzafrir@62.90.10.53) |
| 01:45.26 | dmz | DrkShdw, i am hooking to a voip gateway but I have inbound to local queues (testing for small office) |
| 01:47.02 | DrkShdw | dmz: I haven't done it in a while, but using a via C7 1.5g itx asterisk box connected to a 24 channel voip geateway, worked fine for me. this is probably 4-6 months ago |
| 01:47.59 | dmz | really? i'm just testing my local ivr from iaxy connected phone & a soft phone (ulaw both) and when I queue up 5 calls into the queue it starts hitting 100% when it's playing the status messages |
| 01:48.03 | rishaan | Anyone has pointer to the * book? Not free anymore on O'REILLY |
| 01:48.19 | dmz | you try google? |
| 01:48.26 | rishaan | let me try |
| 01:48.59 | rishaan | got it... thanks |
| 01:50.42 | Marshall16 | Anyone that will install Asterisk , Zaptel etc everything i need to call with my TDM400B card btw its not installed the drivers that is i'll pay via paypal ;\ |
| 01:52.15 | *** join/#asterisk gnubien (n=e@140.243.33.65.cfl.res.rr.com) |
| 01:53.03 | gnubien | hi, looking for info or tutorial on setup of linksys sipura spa-1001 using linux slackware 11.0, got any urls? |
| 01:53.05 | teknoprep | conferencing doesn't work without a zaptel hardware device ? |
| 01:53.35 | Qwell | teknoprep: or ztdummy |
| 01:53.42 | teknoprep | ahhh |
| 01:53.54 | teknoprep | ztdummy is a zaptel clone application? |
| 01:54.04 | teknoprep | or a fake zaptel ? |
| 01:54.09 | Qwell | no |
| 01:54.14 | teknoprep | oh what is it ? |
| 01:54.17 | joe | provides the timing needed |
| 01:54.32 | teknoprep | do i still need a hardware device? |
| 01:54.34 | *** join/#asterisk Cyon (n=cyon@cyons.net) |
| 01:54.37 | mistermocha | you can find the * book on digium.com |
| 01:54.49 | Qwell | ~book |
| 01:54.52 | jbot | well, book is a book called Asterisk: The Future of Telephony which is found at http://www.asteriskdocs.org/modules/tinycontent/index.php?id=11 |
| 01:55.24 | joe | teknoprep: http://www.voip-info.org/wiki-Asterisk+timer+ztdummy and read what jbot said :) |
| 01:55.33 | teknoprep | yeah i am reading the book now |
| 01:55.42 | teknoprep | thats where i got the info about zaptel and conferencing |
| 01:57.09 | gnubien | is the Grandstream Budgetone phone junk? |
| 01:57.13 | damanivu | no |
| 01:57.24 | teknoprep | i love the gxp-2000 |
| 01:57.25 | damanivu | It works for me |
| 01:57.39 | *** join/#asterisk Ebola (n=Ebola@host86-138-123-50.range86-138.btcentralplus.com) |
| 01:57.46 | teknoprep | the new firmware they just released actually increased phone quality... the functionality and features of the phone are really good |
| 01:57.50 | damanivu | The only problem I have with the Grandstream is the ringer |
| 01:58.03 | joe | and the sound quality imho |
| 01:58.44 | gnubien | are the Grandstream Budgetone phones easy to configure in linux? |
| 01:58.58 | teknoprep | its a web page to configure them |
| 01:59.07 | teknoprep | you type in the IP addy. |
| 01:59.18 | teknoprep | and wam you have a web page to configure them |
| 01:59.55 | rishaan | Is there a way to send vmail in an email while specifying the email address/contents as part of the dialplan? |
| 02:00.10 | rishaan | I want to send custom message on every vmail/email attachement |
| 02:00.11 | teknoprep | yes |
| 02:00.15 | teknoprep | oh |
| 02:00.23 | rishaan | how? |
| 02:00.31 | Qwell | shouldn't be too difficult |
| 02:00.33 | teknoprep | i thought you meant just send the vmail to an email addy |
| 02:00.51 | rishaan | how to specify the email address in the dialplan instead of the vmail.conf? |
| 02:01.00 | Qwell | I imaging you can use channel variables in emailbody |
| 02:01.07 | Qwell | imagine, rather |
| 02:01.09 | gnubien | teknoprep: are there any urls Grandstream Budgetone for linux setup? |
| 02:01.23 | Qwell | or...meh |
| 02:01.25 | teknoprep | gnubien, wtf are you talking about? |
| 02:01.27 | Qwell | just use a vmnotify script |
| 02:01.33 | Qwell | have it send the email |
| 02:01.40 | rishaan | vmnotify script? let me check |
| 02:01.40 | teknoprep | gnubien, what doesit matter if its linux or windows or mac... if you configure the phone through a webpage ? |
| 02:02.01 | Qwell | externnotify in voicemail.conf |
| 02:02.20 | gnubien | teknoprep: ok, total newb question |
| 02:02.44 | joe | http://www.vonage.com/vonagevphone/ anyone know if there is a sip phone that is sort of like that thing that works well w/ * ie more of a hard phone than a softphone but via a usb port sort of thing? |
| 02:03.13 | teknoprep | you want a soft phone for Windows ? |
| 02:03.16 | teknoprep | use idefisk |
| 02:03.31 | teknoprep | idefisk is pretty much the best * compliant softphone you can get and its free |
| 02:03.37 | teknoprep | the USB part you can use whatever headset you want |
| 02:03.40 | joe | and for linux |
| 02:03.50 | teknoprep | idefisk is also for linux |
| 02:03.50 | teknoprep | and mac |
| 02:04.04 | damanivu | idefisk works well |
| 02:04.06 | teknoprep | it works over IAX2 tho not SIP |
| 02:04.12 | joe | nm |
| 02:04.20 | joe | just saw that, thanks |
| 02:04.21 | teknoprep | but IAX2 is compliant with NAT... so you can use it any where in the world with 0 nat problems |
| 02:04.36 | teknoprep | SIP sucks for NAT |
| 02:04.59 | teknoprep | unless you use a decent SIP proxy that is located on the INET |
| 02:05.06 | rishaan | Qwell, thanks for poting vmnotify.. I took a quick look ... needs some mod before I could use |
| 02:05.17 | damanivu | IAX2 also uses encrypted registering if I am not mistaken. |
| 02:05.22 | rishaan | here is what I need. Any help/suggestion would save some time... |
| 02:05.35 | rishaan | Caller leaves a voicemail for one of my users |
| 02:05.55 | rishaan | I need to modify the wav file to append a fixed message at the end |
| 02:06.05 | *** join/#asterisk bkw_ (n=brian@70.143.58.55) |
| 02:06.12 | rishaan | need to send an email with modified wav attached |
| 02:06.25 | damanivu | Can you send two WAV files? |
| 02:06.26 | rishaan | the email will contain certain specific variable (from the dialplan) |
| 02:06.40 | teknoprep | yeah have fun with that |
| 02:06.52 | rishaan | nope, has to be a single wav ( i was thinking of writing an elaborate script) which does all this manually |
| 02:07.30 | rishaan | my problem is the variable ??? Don't know how to customize the message with a variable from dialplan (let's assume the callee's account details) |
| 02:07.39 | damanivu | It should be possible but I am not sure how. |
| 02:07.57 | rishaan | hmm... even if I could attach two wav files, how would that work? |
| 02:08.10 | damanivu | That is easy. |
| 02:08.12 | damanivu | Hold |
| 02:08.26 | rishaan | i am sure its possible and I am willing to spend time/energy if pointed in the right direction |
| 02:08.39 | gnubien | teknoprep: are the grandstream Budgetone phones sip compliant? or only iax? |
| 02:08.47 | rishaan | don't want to head in the wrong direction and re-invent the wheel if something like this exists already |
| 02:08.48 | teknoprep | gnubien, they are sip |
| 02:08.57 | teknoprep | gnubien, i don't know if anyone makes an IAX hardphone |
| 02:09.12 | teknoprep | gnubien, only iax hardware device i know of it the IAXY and its an ATA |
| 02:09.36 | gnubien | teknoprep: thanks for the info |
| 02:09.37 | rishaan | basically: modify vmail text contents (as part of the email) and append to the end of vmail |
| 02:09.58 | rishaan | wav file...are the two features I am looking into |
| 02:10.50 | teknoprep | gnubien, np.. not like i am any type of pro tho |
| 02:11.17 | damanivu | here: exten => h,1,system(mime-construct --to "{your-eimail-here}" --subject "Call from ${CALLERID(number)} ${CALLERID(name)}" --attachment wavfilehere.wav --type application/wav --file /var/spool/asterisk/monitor/wavefile.wav |
| 02:11.44 | rishaan | beautiful |
| 02:11.51 | damanivu | I missed a ')' at the end |
| 02:12.11 | rishaan | thanks a lot thanks a lot damainvu you are good :-) |
| 02:12.29 | damanivu | n/p |
| 02:14.43 | *** join/#asterisk trelane (n=trelane@unaffiliated/trelane) |
| 02:21.57 | *** join/#asterisk joat (n=joat@ip70-160-147-169.hr.hr.cox.net) |
| 02:28.32 | *** join/#asterisk tzafrir (n=tzafrir@62.90.10.53) |
| 02:30.53 | *** join/#asterisk Iamnacho (i=Iamnacho@ip68-103-140-124.ks.ok.cox.net) |
| 02:41.45 | *** join/#asterisk damanivu (n=damanivu@ip68-4-207-173.oc.oc.cox.net) |
| 02:47.38 | *** join/#asterisk rishaan (n=rishaan@c-67-160-249-95.hsd1.ca.comcast.net) |
| 03:01.32 | *** join/#asterisk angom_h (n=Angel@red-corp-201.130.156.15.telnor.net) |
| 03:11.59 | *** join/#asterisk brimstone (n=brimston@pdpc/sponsor/digium/brimstone) |
| 03:19.50 | *** join/#asterisk SwK (n=Silik0nJ@12-214-191-109.client.mchsi.com) |
| 03:37.01 | *** part/#asterisk hyphen (n=hyphen@71.224.213.97) |
| 03:48.43 | *** join/#asterisk Malawar (n=Malawar@adsl-75-21-162-87.dsl.sgnwmi.sbcglobal.net) |
| 03:49.20 | Malawar | for some reason my asterisk isn't able to find any sounds |
| 03:49.43 | Malawar | asterisk.conf is configured for /var/lib/asterisk and the sound is in /var/lib/asterisk/sounds/test.wav |
| 03:49.57 | *** join/#asterisk Marshall16 (n=Marshall@cpe-76-181-166-122.columbus.res.rr.com) |
| 03:49.59 | Malawar | Play(test) just says it can't find the file :( |
| 03:50.36 | *** join/#asterisk Ox0F0-0FF (n=pierre@201.38.238.66) |
| 03:52.40 | *** join/#asterisk coppice (n=chatzill@229.166.17.210.dyn.pacific.net.hk) |
| 03:52.55 | *** join/#asterisk bmg505 (n=leon@c1-24-8.rndf.isadsl.co.za) |
| 03:52.59 | *** join/#asterisk dejaydreams (n=bak@CPE-24-163-239-227.mn.res.rr.com) |
| 03:53.39 | dejaydreams | anyone happen to know a lot about the Cisco 7960? I have some hardware related questions. |
| 03:54.28 | Nugget | It's easier to just ask your questions instead of trying to prequalify the channel. |
| 03:55.16 | Nugget | while many of us might not know "a lot" about 7960s, some of us might know the answers you need. |
| 03:55.20 | dejaydreams | well I just got a 7960 today and when I plugged it in the headset button went green, showed the universal application loader, I unplugged it to move it on my desk and now it won't power up, or at least that is what it appears as none of the buttons go green and the screen is blank |
| 03:56.19 | Nugget | a green headset button is the "I'm rebooting!" indicator (in addition to the headset indicator) |
| 03:56.26 | Nugget | sounds strange that it did that before |
| 03:57.17 | *** join/#asterisk juanjoc (n=juanjoc@248-32-235-201.fibertel.com.ar) |
| 03:57.47 | dejaydreams | I don't have TFTP running on my network yet, so if it was trying to find something maybe that's why? But in any case it just does nothing other than look good on my desk at the moment |
| 03:58.10 | Nugget | it would be getting a lot futher if the problem were a lack of a suitable tftp server. |
| 03:58.26 | Nugget | you should be seeing something on the screen |
| 03:58.35 | dejaydreams | which is what I figured...i should see something on the screen |
| 03:59.25 | file | Heute Ist Mein Tag! |
| 04:03.00 | *** join/#asterisk lowlevel (n=Stuart@CPE0050ba71c82f-CM000f9f7d6742.cpe.net.cable.rogers.com) |
| 04:03.01 | *** join/#asterisk zeedo (n=zeedo@reboot-robot.net) |
| 04:03.35 | dejaydreams | i've been trying to find if there are any key combos that you should press when plugging in the power to do any sort of resets but i'm finding nothing |
| 04:03.57 | *** join/#asterisk Native_Mind (n=ajb@c-69-142-19-57.hsd1.nj.comcast.net) |
| 04:07.01 | Nugget | * 6 Settings (all at once) will make it reboot |
| 04:07.11 | Nugget | but there shouldn't be anything you have to do just for plugging it in |
| 04:08.06 | file | Nugget: your SIP URI is evil |
| 04:08.35 | Nugget | why is it evil? |
| 04:08.46 | dejaydreams | well I wonder if the power brick is crapped or something, I'll have to get my meter on it once I find it (I hate moving) |
| 04:08.56 | file | because it gave ringing indication, switched to progress, gave no feedback, and then went really chop and I heard a beep after a bit |
| 04:09.03 | Nugget | weird. |
| 04:09.32 | Nugget | I was rebooting my cisco when you called (verifying the key combo before I said anything to dejaydreams) so I couldn't answer. |
| 04:09.40 | Nugget | but it should have dumped you in comedian mail |
| 04:09.42 | Malawar | meh |
| 04:09.49 | Malawar | why does asterisk have to load all the modules by default :( |
| 04:10.08 | file | Malawar: if you don't want it to then change modules.conf |
| 04:10.20 | Malawar | my main problem is having dozens of conf files |
| 04:11.35 | file | Nugget: let's try this... again! ready? |
| 04:11.44 | Nugget | ready! |
| 04:13.26 | Nugget | Moo! |
| 04:17.06 | *** join/#asterisk Marshall16 (n=Marshall@cpe-76-181-166-122.columbus.res.rr.com) |
| 04:17.27 | file | rm -rf Nugget |
| 04:17.58 | Malawar | right, so |
| 04:18.09 | Malawar | did something happen to 'control stream file' in 1.4? |
| 04:18.15 | Marshall16 | What Linux Distro is preferd for asterisk to be installed on with zaptel freepbx ETC? |
| 04:18.52 | Nugget | Whichever distro you prefer. Asterisk doesn't care at all. |
| 04:19.02 | Marshall16 | b/s |
| 04:19.13 | DrkShdw | ubuntu and suse make it kinda painful IMO. the rest should be decent |
| 04:19.22 | Malawar | i run it on debian, no problems.. |
| 04:19.25 | file | I'm a Debian guy myself |
| 04:19.28 | Malawar | except I think I lost some functionality in the new version :/ |
| 04:19.45 | Nugget | I run it on OS X and FreeBSD. Clearly the platform is pretty far down the list of concerns. |
| 04:19.52 | DrkShdw | I personally use CentOS. (still waiting on *good* bsd zaptel drivers) heh |
| 04:19.57 | file | my toaster runs Asterisk too |
| 04:20.06 | Marshall16 | basicly |
| 04:20.16 | Marshall16 | what os should i install so i can pay one of you to install all my shit for me? |
| 04:20.27 | Marshall16 | so it is easyer for you to install ;) |
| 04:20.42 | *** part/#asterisk angom_h (n=Angel@red-corp-201.130.156.15.telnor.net) |
| 04:20.48 | file | Nugget: eeeeeeeevil |
| 04:21.11 | file | Nugget: I sentence you to installing Cisco Call Manager! |
| 04:21.17 | Marshall16 | anyone? |
| 04:21.18 | Nugget | gahh |
| 04:21.21 | DrkShdw | Nugget: make it easy, install an AGI on his asterisk toaster. press 1 for light, 2 for medium, 3 for dark, 4 to burn down the place |
| 04:21.30 | *** part/#asterisk joat (n=joat@ip70-160-147-169.hr.hr.cox.net) |
| 04:29.38 | *** join/#asterisk __freedom__lover (n=eduardo@201-26-102-119.dsl.telesp.net.br) |
| 04:31.50 | __freedom__lover | quit |
| 04:32.08 | *** join/#asterisk Mavvie (n=edwin@ppp1-155.lns1.syd7.internode.on.net) |
| 04:32.34 | Marshall16 | so what OS should i install so it will be easyest to install asterisk zaptel etc |
| 04:33.17 | *** join/#asterisk __freedom__lover (n=eduardo@201-26-102-119.dsl.telesp.net.br) |
| 04:33.40 | __freedom__lover | dfg |
| 04:33.57 | sp0n9e- | i'll start the fight...debian is a personal favorite, though suse is the only stock distro that's got my sata drivers (or at least at time of install) |
| 04:34.28 | sp0n9e- | but really, i'd go with what you're most familiar with |
| 04:42.27 | *** join/#asterisk Math` (n=privmath@modemcable238.43-82-70.mc.videotron.ca) |
| 04:46.13 | *** join/#asterisk rishaan (n=rishaan@c-67-160-249-95.hsd1.ca.comcast.net) |
| 05:03.39 | *** join/#asterisk Zero1328 (n=Zero@CPE-58-162-55-72.qld.bigpond.net.au) |
| 05:03.51 | *** part/#asterisk Zero1328 (n=Zero@CPE-58-162-55-72.qld.bigpond.net.au) |
| 05:04.07 | *** join/#asterisk SonicChao (n=SonicCha@dpc67142187100.direcpc.com) |
| 05:06.21 | *** join/#asterisk coppice (n=chatzill@229.166.17.210.dyn.pacific.net.hk) |
| 05:14.08 | Malawar | <PROTECTED> |
| 05:14.08 | Malawar | <PROTECTED> |
| 05:14.09 | Malawar | :( |
| 05:14.17 | Malawar | it plays the sound just fine |
| 05:18.12 | *** join/#asterisk Marshall16 (n=Marshall@cpe-76-181-166-122.columbus.res.rr.com) |
| 05:19.17 | Malawar | oops, nevermind. |
| 05:19.21 | Malawar | guess i shouldn't write to stdin |
| 05:19.47 | *** part/#asterisk file (n=file@neutrino.joshua-colp.com) |
| 05:24.30 | *** join/#asterisk aao_pwner (n=aao_pwne@c-24-21-91-140.hsd1.wa.comcast.net) |
| 05:29.05 | *** join/#asterisk zzxxcc (n=zzxxcc@221.232.118.191) |
| 05:32.56 | *** join/#asterisk Shadowpillar (n=Shadow@dialup-4.233.125.109.Dial1.LosAngeles1.Level3.net) |
| 05:33.58 | Shadowpillar | is there any way to make use of some T1 frame relays and DS1's with asterisk? |
| 05:34.25 | Shadowpillar | just for mucking around with within an internal network |
| 05:38.30 | DrkShdw | Shadowpillar: you can use a TDM2400 fro a T1/E1 interface |
| 05:39.46 | Shadowpillar | I just have some telecom equipment I'd like to try out |
| 05:40.44 | Shadowpillar | a NewBridge 3624 Channel Bank (with the huge 25 pair connectors..) and a 1024k frame relay by kentrox, and 2 westell DS1 mountings |
| 05:41.03 | Shadowpillar | know how I could wire any of that up? :S |
| 05:41.12 | Shadowpillar | I dont know much about telecom equipment |
| 05:42.17 | DrkShdw | only t1 interface I've ever used with asterisk, is the tdm2400 by digium. |
| 05:43.27 | *** join/#asterisk file (n=file@neutrino.joshua-colp.com) |
| 05:43.27 | *** mode/#asterisk [+o file] by ChanServ |
| 05:46.31 | *** join/#asterisk jo3sm1th (i=jo3sm1th@68.sub-75-195-246.myvzw.com) |
| 05:49.58 | *** join/#asterisk Mugatu_ (n=mugatu@unaffiliated/Mugatu) |
| 05:51.18 | DrkShdw | hmm, I didn't know file was an op |
| 05:55.22 | DrkShdw | Nugget: you still around? Just curious what hardware you use with FreeBSD to interface with the analog lines. I'm reading the bsd-zaptel drivers aren't very stable (and have experienced the same in the past) |
| 05:56.25 | file | DrkShdw: I'm an insane op at that |
| 05:57.08 | DrkShdw | file heh. to be honest, I never really paid attention to who the ops were. I just noticed the channel mode a few mins ago |
| 05:57.28 | file | yeah, I parted the channel... dunno why |
| 05:58.10 | *** join/#asterisk RaHaiL (n=rahail1@209-19-88-243.detroit.mi.D-Conn.net) |
| 05:58.34 | DrkShdw | hrm, guess I'ma do some research. I wanna find out if bsd-zaptel has gotten better, or if Nugget is just using a pure-voip asterisk. I'd love to get asterisk (with voip and analog) going *stable* on freebsd |
| 06:04.57 | *** join/#asterisk AJaymn (n=boiwonde@24-159-236-181.dhcp.mdsn.wi.charter.com) |
| 06:05.33 | AJaymn | is there any way to get asterisk to read a text file to a caller? what id like to do is have it read a customers bill amount. |
| 06:09.43 | *** join/#asterisk kristalino (n=kristali@LNeuilly-152-21-126-73.w193-253.abo.wanadoo.fr) |
| 06:42.33 | *** join/#asterisk eject_ck (n=eject_ck@88-214-80-200.dialup.umc.net.ua) |
| 06:43.48 | *** join/#asterisk Assid (i=assid@203.115.83.215) |
| 06:58.50 | *** join/#asterisk re-pete (n=repete@24.96.201.72) |
| 07:01.13 | *** join/#asterisk svenna_ (n=svenna@p548D092E.dip0.t-ipconnect.de) |
| 07:06.48 | *** join/#asterisk jmls (n=asterisk@host81-159-167-80.range81-159.btcentralplus.com) |
| 07:07.26 | jmls | morning y'all |
| 07:16.42 | stephane_ | jour |
| 07:18.56 | *** join/#asterisk BigBadHoss (n=hoss@65.4.26.233) |
| 07:19.09 | BigBadHoss | hey all |
| 07:19.28 | BigBadHoss | im getting an error in asterisk -r Unable to connect to remote asterisk (does /var/run/asterisk/asterisk.ctl exist?) |
| 07:19.39 | BigBadHoss | it checked and it does exist |
| 07:19.51 | BigBadHoss | i think its a permissions problem |
| 07:20.00 | BigBadHoss | i checked with root and it does exist |
| 07:20.50 | BigBadHoss | anybody here? |
| 07:22.10 | jmls | BigBadHoss: try asterisk -vvvvvvvvvvvvvvc and see what happens |
| 07:22.22 | BigBadHoss | it runs fine |
| 07:22.24 | BigBadHoss | no errors |
| 07:22.29 | BigBadHoss | stops after chan_zap.so |
| 07:22.35 | jmls | stops ? |
| 07:22.46 | BigBadHoss | it dosent do anything else |
| 07:22.50 | BigBadHoss | back to shell |
| 07:23.00 | jmls | you have have a problem with the zap config |
| 07:23.05 | BigBadHoss | ok |
| 07:23.10 | BigBadHoss | i used svn branch |
| 07:23.13 | BigBadHoss | what next |
| 07:23.16 | jmls | what zap device do you have ? |
| 07:24.14 | BigBadHoss | tdm400p |
| 07:24.47 | jmls | did you download libpri and zaptel as well as asterisk ? |
| 07:24.53 | BigBadHoss | yes |
| 07:25.09 | jmls | built libpri first, then zaptel .. |
| 07:25.15 | BigBadHoss | yes |
| 07:25.21 | BigBadHoss | exact specs Digium TDM12B (TDM400B) |
| 07:25.34 | BigBadHoss | it shows up in lspci |
| 07:25.36 | jmls | pastebin the output up to the chan_zap.so |
| 07:25.53 | BigBadHoss | its over ssh, so do you want me to pipe it into a file? |
| 07:26.22 | jmls | nah, pastebin would be best |
| 07:27.12 | DrkShdw | bbl all |
| 07:27.47 | BigBadHoss | http://pastebin.ca/203585 |
| 07:27.58 | BigBadHoss | after that i get a shell root@asteriskbox |
| 07:28.48 | jmls | try service zaptel start and see what happens |
| 07:29.26 | BigBadHoss | root@Asterisk:/var/run/asterisk# service zaptel start |
| 07:29.26 | BigBadHoss | bash: service: command not found |
| 07:29.41 | jmls | what OS are you on |
| 07:29.42 | Marshall16 | lol |
| 07:29.44 | carrar | oh yeah, you are owned |
| 07:29.53 | BigBadHoss | ubuntu |
| 07:30.17 | jmls | what does ubuntu use to start a service ? |
| 07:30.32 | BigBadHoss | not sure |
| 07:31.07 | jmls | try /etc/init.d/zaptel start |
| 07:31.07 | BigBadHoss | dosent have one |
| 07:31.13 | BigBadHoss | yeah |
| 07:31.19 | BigBadHoss | thats the way you start them |
| 07:31.40 | BigBadHoss | no such file |
| 07:31.57 | jmls | go back to the zaptel source directory |
| 07:31.59 | jmls | make install |
| 07:32.01 | BigBadHoss | i can try compilingit again, but * wouldnt compile without it would it? |
| 07:32.04 | jmls | make config |
| 07:32.40 | BigBadHoss | anything else? |
| 07:32.59 | jmls | afaik that should be all to install the zaptel service |
| 07:33.52 | BigBadHoss | stll stops there |
| 07:34.07 | jmls | did you reboot the machine after installing ? If the config has installed all the correct automatic services, then they will start themselves on a boot |
| 07:34.08 | BigBadHoss | no problems from zaptel start |
| 07:34.13 | jmls | ok |
| 07:34.14 | BigBadHoss | ok i will try that |
| 07:34.31 | BigBadHoss | not used to rebooting linux :) |
| 07:35.04 | jmls | no, it's just the only way I know (apart from init 3 then init 6) of restarting most things :| |
| 07:35.11 | carrar | zaptel options |
| 07:35.12 | carrar | <PROTECTED> |
| 07:35.12 | carrar | <PROTECTED> |
| 07:35.12 | carrar | <PROTECTED> |
| 07:35.12 | carrar | <PROTECTED> |
| 07:35.26 | carrar | depending on your setup |
| 07:35.28 | BigBadHoss | whoa what? |
| 07:35.51 | carrar | and of course |
| 07:35.53 | carrar | make install |
| 07:35.53 | BigBadHoss | make config worked? |
| 07:36.01 | BigBadHoss | or do i need something else |
| 07:36.24 | jmls | carrar: BigBadHoss said that "no problems from zaptel start" |
| 07:36.30 | carrar | oh |
| 07:36.33 | carrar | I just came in |
| 07:37.10 | carrar | then asterisk |
| 07:37.11 | carrar | <PROTECTED> |
| 07:37.11 | carrar | <PROTECTED> |
| 07:37.11 | carrar | <PROTECTED> |
| 07:37.11 | carrar | <PROTECTED> |
| 07:37.13 | carrar | er |
| 07:37.13 | jmls | no worries: he has problems with asterisk starting, it craps out after "loading chan_zap.so". returns to the shell |
| 07:37.15 | carrar | damn it |
| 07:37.18 | jmls | :) |
| 07:37.20 | carrar | <PROTECTED> |
| 07:37.20 | carrar | <PROTECTED> |
| 07:37.20 | carrar | <PROTECTED> |
| 07:37.21 | carrar | <PROTECTED> |
| 07:37.23 | carrar | there |
| 07:37.25 | carrar | for asterisk |
| 07:37.30 | BigBadHoss | marshall@Asterisk:~$ /etc/init.d/zaptel start |
| 07:37.30 | BigBadHoss | Loading zaptel framework: done. |
| 07:37.30 | BigBadHoss | Waiting for zap to come online...OK |
| 07:37.30 | BigBadHoss | Loading zaptel hardware modules: wctdmRunning ztcfg: . |
| 07:37.39 | BigBadHoss | thats it after reboot |
| 07:37.46 | carrar | ztcfg -vvvv |
| 07:37.56 | jmls | BigBadHoss: what's your zapata.conf - is it set up right ? |
| 07:38.11 | BigBadHoss | marshall@Asterisk:~$ ztcfg -vvvvvv |
| 07:38.11 | BigBadHoss | Notice: Configuration file is /etc/zaptel.conf |
| 07:38.11 | BigBadHoss | line 0: Unable to open master device '/dev/zap/ctl' |
| 07:38.12 | BigBadHoss | 1 error(s) detected |
| 07:38.12 | BigBadHoss | marshall@Asterisk:~$ |
| 07:38.19 | carrar | talking asterisk is fun when drinking lots of wine! |
| 07:38.22 | carrar | heheh |
| 07:38.24 | carrar | w00t! |
| 07:38.29 | jmls | <PROTECTED> |
| 07:38.39 | carrar | no zap devices |
| 07:39.00 | Marshall16 | 0000:05:07.0 Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface |
| 07:39.05 | carrar | look at the instructions installing the devices |
| 07:39.10 | carrar | udev |
| 07:39.47 | jmls | I concur |
| 07:39.49 | BigBadHoss | i am using freepbx, but i cant even get * to work right |
| 07:40.03 | carrar | read the read me |
| 07:40.04 | jmls | yikes |
| 07:40.06 | carrar | in zaptel |
| 07:40.12 | carrar | it's helpfull |
| 07:40.19 | carrar | look at udev |
| 07:40.29 | carrar | FYI |
| 07:40.30 | carrar | Always |
| 07:40.33 | carrar | read the README |
| 07:40.50 | BigBadHoss | the src? |
| 07:41.11 | carrar | ok I lied |
| 07:41.13 | carrar | hah |
| 07:41.17 | Marshall16 | ... |
| 07:41.18 | carrar | README.udev |
| 07:41.19 | carrar | :) |
| 07:41.25 | carrar | in the zap source yes |
| 07:41.36 | carrar | You need to do that |
| 07:42.52 | BigBadHoss | i ma helping him |
| 07:43.04 | carrar | did you shoot the sharif |
| 07:43.07 | BigBadHoss | yes |
| 07:43.45 | jmls | OMG - they've killed Woody .. |
| 07:43.48 | carrar | read that yet? |
| 07:43.56 | carrar | time is money! |
| 07:43.57 | *** join/#asterisk DrkShdw (n=scorpio@unaffiliated/drkshdw) |
| 07:44.36 | carrar | and tell me you are not running 1.4 |
| 07:45.08 | carrar | my support level here does not cover anything over 1.2* |
| 07:45.14 | *** join/#asterisk DrkShdw (n=scorpio@unaffiliated/drkshdw) |
| 07:45.15 | carrar | heh |
| 07:45.57 | BigBadHoss | i dont have a 50-udev.rules file |
| 07:46.20 | carrar | any rule files? |
| 07:46.38 | BigBadHoss | <PROTECTED> |
| 07:46.38 | BigBadHoss | # zaptel devices with ownership/permissions for running as non-root |
| 07:46.38 | BigBadHoss | KERNEL=="zapctl", NAME="zap/ctl", OWNER="asterisk", GROUP="asterisk", MODE="0660" |
| 07:46.38 | BigBadHoss | KERNEL=="zaptimer", NAME="zap/timer", OWNER="asterisk", GROUP="asterisk", MODE="0660" |
| 07:46.38 | BigBadHoss | KERNEL=="zapchannel", NAME="zap/channel", OWNER="asterisk", GROUP="asterisk", MODE="0660" |
| 07:46.39 | BigBadHoss | KERNEL=="zappseudo", NAME="zap/pseudo", OWNER="asterisk", GROUP="asterisk", MODE="0660" |
| 07:46.41 | BigBadHoss | KERNEL=="zap[0-9]*", NAME="zap/%n", OWNER="asterisk", GROUP="asterisk", MODE="0660" |
| 07:46.52 | carrar | did you reboot your system? |
| 07:46.57 | BigBadHoss | yes |
| 07:46.59 | carrar | hrmm |
| 07:47.05 | BigBadHoss | make udev does nothing |
| 07:47.15 | carrar | anything in dmesg? |
| 07:47.15 | BigBadHoss | do i need to do that in the asterisk directory |
| 07:47.28 | BigBadHoss | nope |
| 07:47.43 | Marshall16 | BigBadHoss |
| 07:47.45 | carrar | nothing like Found a Wildcard TDM: Wildcard TDM400P REV I (4 modules) |
| 07:47.49 | carrar | or whatever your card is |
| 07:47.50 | Marshall16 | the lights on the TDM12B are on |
| 07:47.52 | Marshall16 | lol |
| 07:48.18 | BigBadHoss | [17179586.488000] -- DID YOU REMEMBER TO PLUG IN THE HD POWER CABLE TO THE TDM400P?? |
| 07:48.18 | BigBadHoss | [17179586.488000] Unable to do INITIAL ProSLIC powerup on module 0 |
| 07:48.18 | BigBadHoss | [17179586.496000] intel8x0_measure_ac97_clock: measured 54713 usecs |
| 07:48.18 | BigBadHoss | [17179586.496000] intel8x0: clocking to 46896 |
| 07:48.18 | BigBadHoss | [17179586.996000] Unable to do INITIAL ProSLIC powerup on module 0 |
| 07:48.19 | BigBadHoss | [17179586.996000] Module 0: FAILED FXS (FCC) |
| 07:48.22 | carrar | Any reason you have to use ubantu |
| 07:48.23 | BigBadHoss | [17179586.996000] Module 1: Not installed |
| 07:48.25 | BigBadHoss | [17179587.156000] ts: Compaq touchscreen protocol output |
| 07:48.27 | BigBadHoss | [17179587.168000] Real Time Clock Driver v1.12 |
| 07:48.29 | BigBadHoss | [17179587.264000] Module 2: Installed -- AUTO FXO (FCC mode) |
| 07:48.31 | BigBadHoss | [17179587.464000] Module 3: Installed -- AUTO FXO (FCC mode) |
| 07:48.32 | Marshall16 | because its already installed |
| 07:48.33 | Marshall16 | ;\ |
| 07:48.33 | BigBadHoss | [17179587.860000] Found a Wildcard TDM: Wildcard TDM400P REV I (2 modules) |
| 07:48.52 | BigBadHoss | marshall16, did you plug the power cable into it? |
| 07:48.55 | carrar | there |
| 07:48.57 | carrar | it's there |
| 07:49.02 | Marshall16 | power? |
| 07:49.04 | Marshall16 | no |
| 07:49.09 | DrkShdw | heh |
| 07:49.17 | BigBadHoss | [17179586.488000] ProSLIC on module 0 failed to powerup within 504 ms (0 mV only) |
| 07:49.23 | Marshall16 | lol |
| 07:49.25 | BigBadHoss | that needs to be done right? |
| 07:49.31 | Marshall16 | let me turn it off and hook it up |
| 07:49.35 | carrar | did you plug thepower supply into it? |
| 07:49.37 | BigBadHoss | ok ill shut it down |
| 07:49.38 | Marshall16 | no |
| 07:49.40 | Marshall16 | ill need to now |
| 07:49.44 | carrar | hahha |
| 07:49.47 | Marshall16 | shh |
| 07:49.50 | Marshall16 | im newb to this |
| 07:49.59 | DrkShdw | you only need power to the card, if it's got FXS modules |
| 07:50.26 | jmls | DrkShdw: [17179586.996000] Module 0: FAILED FXS (FCC) |
| 07:50.29 | BigBadHoss | well why would module 1 be failed |
| 07:50.50 | jmls | BigBadHoss: [17179586.996000] Module 1: Not installed |
| 07:51.03 | jmls | you've got 1 FXS and 2 FXO ? |
| 07:51.05 | BigBadHoss | marshall are you using any fxs? |
| 07:51.16 | carrar | also try |
| 07:51.17 | carrar | modprobe wcfxs |
| 07:51.40 | DrkShdw | looks to me like he's got 1 fxs, 2 fxo and 1 empty, and forgot to plug the power into the card for the fxs to work |
| 07:51.40 | BigBadHoss | marshall thats probably why trix wouldnt work :) |
| 07:51.47 | BigBadHoss | ha |
| 07:51.47 | carrar | once you plug power into it |
| 07:52.01 | BigBadHoss | should work right? |
| 07:52.13 | carrar | Should win the lotto too |
| 07:52.32 | BigBadHoss | i already have |
| 07:52.32 | carrar | I'm not feeling the love |
| 07:52.32 | BigBadHoss | too late for anybody |
| 07:53.13 | carrar | modprobe wctdm |
| 07:55.01 | carrar | STATUS CHECK PLS |
| 07:55.04 | carrar | K THNX |
| 07:55.16 | BigBadHoss | turning the system on, you drunk |
| 07:55.20 | carrar | hahha |
| 07:55.22 | carrar | FU |
| 07:55.24 | carrar | !! |
| 07:55.37 | BigBadHoss | that wine will bite-back in the morning :) |
| 07:55.43 | carrar | NO |
| 07:55.50 | carrar | I drink two large glasses of water |
| 07:55.56 | carrar | solves everything |
| 07:56.10 | carrar | other then I have to pee a lot |
| 07:56.15 | jmls | shredded chicken mayo sandwich always works |
| 07:56.26 | carrar | actually that sounds good |
| 07:56.47 | jmls | trust me, it's saved my life a few time :) |
| 07:56.52 | carrar | heh |
| 07:57.19 | BigBadHoss | Logger Warning: Unable to open log file '/var/log/asterisk/full': Permission denied |
| 07:57.28 | BigBadHoss | what are the rights i need to set for it |
| 07:57.43 | carrar | umm |
| 07:57.48 | carrar | what is full? |
| 07:57.50 | jmls | are you running * as root ? |
| 07:57.53 | BigBadHoss | i did chown asterisk /var/log/asterisk |
| 07:57.59 | BigBadHoss | no as asterisk i believe |
| 07:58.02 | *** join/#asterisk tsurk0 (n=tsurko@vpn-pppoe-213-240-242-237.megalan.bg) |
| 07:58.10 | carrar | drwxr-xr-x 5 root root 4096 Aug 28 19:09 /var/log/asterisk |
| 07:58.14 | carrar | 755 |
| 07:58.56 | jmls | drwxr-xr-x 4 root root 4096 Oct 2 18:39 /var/log/asterisk |
| 07:59.07 | jmls | snap. |
| 07:59.15 | carrar | I win, 5 trumps 4 |
| 07:59.35 | jmls | nuts. |
| 07:59.55 | BigBadHoss | still craps out at zap.so |
| 08:00.21 | jmls | BigBadHoss: have you configured your /etc/asterisk/zapata.conf for the hw ? |
| 08:00.27 | BigBadHoss | no |
| 08:00.30 | BigBadHoss | i ran ztcfg |
| 08:00.34 | BigBadHoss | would that not do it |
| 08:00.39 | jmls | no. |
| 08:00.40 | carrar | Are you starting asterisk with: /usr/sbin/asterisk -vvvgc |
| 08:00.46 | BigBadHoss | no |
| 08:00.49 | BigBadHoss | -cvvvvvvvv |
| 08:01.18 | carrar | modprobe wctdm |
| 08:01.21 | carrar | what does that do |
| 08:01.30 | carrar | in your dmesg |
| 08:01.53 | BigBadHoss | [17179849.816000] Registered tone zone 0 (United States / North America) |
| 08:01.54 | BigBadHoss | [17179887.188000] Registered Tormenta2 PCI |
| 08:01.54 | BigBadHoss | [17179887.188000] Registered tone zone 0 (United States / North America) |
| 08:01.54 | BigBadHoss | [17179887.268000] Registered tone zone 0 (United States / North America) |
| 08:01.54 | BigBadHoss | [17179887.292000] Registered tone zone 0 (United States / North America) |
| 08:01.54 | BigBadHoss | [17179887.316000] Registered tone zone 0 (United States / North America) |
| 08:01.56 | BigBadHoss | [17179887.340000] Registered tone zone 0 (United States / North America) |
| 08:02.00 | BigBadHoss | [17179887.360000] usbcore: registered new driver wcusb |
| 08:02.02 | BigBadHoss | [17179887.360000] Wildcard USB FXS Interface driver registered |
| 08:02.04 | BigBadHoss | [17179887.360000] Registered tone zone 0 (United States / North America) |
| 08:02.06 | BigBadHoss | [17179890.368000] Registered tone zone 0 (United States / North America) |
| 08:02.08 | BigBadHoss | [17179912.632000] Registered tone zone 0 (United States / North America) |
| 08:02.15 | DrkShdw | holy spamerrific |
| 08:02.25 | BigBadHoss | sorry guys |
| 08:02.32 | kristalino | gosh |
| 08:02.38 | BigBadHoss | its late and nobody else is using the chan |
| 08:02.50 | kristalino | no, it's early |
| 08:02.57 | jmls | very early for a Sunday |
| 08:02.59 | carrar | did you put your /etc/zap* in pastein.ca yet? |
| 08:03.05 | kristalino | sunday morning |
| 08:03.05 | BigBadHoss | hang on |
| 08:03.12 | carrar | phttp://pastebin.ca/ |
| 08:03.14 | jmls | and /etc/asterisk/zapata.conf |
| 08:03.14 | carrar | http://pastebin.ca/ |
| 08:03.28 | kristalino | pastie.caboo.se |
| 08:03.40 | carrar | put /etc/zaptel.conf in the pastebin |
| 08:03.53 | carrar | put both |
| 08:03.59 | jmls | yay ;) |
| 08:04.49 | carrar | Your /etc/zaptel.conf |
| 08:04.52 | BigBadHoss | i dont have a zapata.conf |
| 08:04.53 | carrar | shouwl be as simple as |
| 08:04.53 | carrar | loadzone = us |
| 08:04.54 | carrar | defaultzone=us |
| 08:04.54 | carrar | fxoks=1-4 |
| 08:05.04 | BigBadHoss | haha |
| 08:05.06 | carrar | if it's fxs |
| 08:05.13 | BigBadHoss | i have 1 fxs 2 fxo |
| 08:05.26 | carrar | fssks |
| 08:05.27 | carrar | err |
| 08:05.31 | carrar | fxsks |
| 08:05.34 | carrar | fxsko |
| 08:05.35 | carrar | then |
| 08:05.40 | carrar | damn it |
| 08:05.45 | carrar | fxsfs |
| 08:05.48 | jmls | strong wine ? |
| 08:05.49 | carrar | fxoks |
| 08:05.50 | carrar | :) |
| 08:06.08 | BigBadHoss | http://pastebin.ca/203613 |
| 08:06.15 | BigBadHoss | someone edit it for me |
| 08:06.31 | carrar | HOLY MILLIONS OF COMMENTS |
| 08:06.53 | carrar | ok |
| 08:06.57 | BigBadHoss | its the standard file |
| 08:06.58 | carrar | so nothing is configured |
| 08:07.02 | BigBadHoss | nope |
| 08:07.05 | carrar | which is ok |
| 08:07.37 | carrar | whats in your log files |
| 08:07.43 | BigBadHoss | which one |
| 08:08.02 | carrar | <PROTECTED> |
| 08:08.25 | carrar | probably should have started with that |
| 08:08.43 | carrar | no pasting |
| 08:08.48 | BigBadHoss | no messages, just full and queue_log |
| 08:09.04 | carrar | just full? |
| 08:09.06 | jmls | shouldn't he have his fxo / fxs set up in /etc/zaptel.conf ? |
| 08:09.14 | carrar | yeah |
| 08:09.16 | carrar | but |
| 08:09.19 | *** part/#asterisk El_Maestro (n=hpod@189.157.33.154) |
| 08:09.24 | carrar | asterisk should die if it is not configuted |
| 08:09.29 | carrar | shouldn't |
| 08:09.52 | jmls | it does die - it doesn't startup |
| 08:09.58 | carrar | the default install it will run |
| 08:09.58 | BigBadHoss | Oct 15 04:08:00 VERBOSE[5297] logger.c: [chan_zap.so]Oct 15 04:08:00 VERBOSE[5297] logger.c: [chan_zap.so] => (Zapata Telephony w/PRI) |
| 08:09.59 | BigBadHoss | Oct 15 04:08:00 ERROR[5297] chan_zap.c: Unable to load config zapata.conf |
| 08:09.59 | BigBadHoss | Oct 15 04:08:00 WARNING[5297] loader.c: chan_zap.so: load_module failed, returning -1 |
| 08:09.59 | BigBadHoss | Oct 15 04:08:00 WARNING[5297] loader.c: Loading module chan_zap.so failed! |
| 08:10.01 | BigBadHoss | sorry |
| 08:10.23 | jmls | BigBadHoss: Oct 15 04:08:00 ERROR[5297] chan_zap.c: Unable to load config zapata.conf |
| 08:10.27 | BigBadHoss | yes |
| 08:10.38 | BigBadHoss | is that permissions or just not configured |
| 08:10.42 | carrar | I did n't see that file in the pastebin |
| 08:10.57 | BigBadHoss | thats the sample file i put up |
| 08:11.00 | carrar | Pleased to be pasting that in bastebin |
| 08:11.01 | BigBadHoss | wait |
| 08:11.08 | BigBadHoss | i dont have one |
| 08:11.11 | carrar | yes you do |
| 08:11.19 | carrar | touch it then |
| 08:11.20 | BigBadHoss | where? |
| 08:11.27 | jmls | in /etc/asterisk |
| 08:11.34 | BigBadHoss | i have a template |
| 08:11.43 | carrar | <PROTECTED> |
| 08:12.03 | Marshall16 | zapata.conf.template and zapata_additional.conf is all thats there |
| 08:12.11 | jmls | wtf ? |
| 08:12.13 | BigBadHoss | yes |
| 08:12.25 | carrar | ok you did not to the correct make commands |
| 08:12.34 | BigBadHoss | ok make what? |
| 08:12.48 | carrar | DEATH TO THEE WHO FAILS THE README |
| 08:12.48 | jmls | no, he's using freepbx ...... |
| 08:12.48 | BigBadHoss | yes |
| 08:12.48 | jmls | bastard child that it is |
| 08:13.10 | jmls | go to /usr/src/asterisk |
| 08:13.13 | jmls | make samples |
| 08:13.58 | BigBadHoss | k |
| 08:14.26 | BigBadHoss | done |
| 08:14.31 | BigBadHoss | what needs tp be put it |
| 08:14.37 | carrar | WHIP IT UP CHILD |
| 08:14.52 | jmls | make samples installs sample config files into /etc/asterisk |
| 08:15.06 | jmls | you should have /etc/asterisk/zapata.conf |
| 08:15.15 | BigBadHoss | i have it |
| 08:15.19 | Marshall16 | yeah |
| 08:15.19 | BigBadHoss | its opened with nano |
| 08:15.20 | Marshall16 | its ther |
| 08:15.30 | jmls | fire up asterisk -vvvvvvvvvvc |
| 08:15.36 | carrar | <PROTECTED> |
| 08:15.57 | jmls | I win 10 vs higher than 3 |
| 08:15.58 | BigBadHoss | done |
| 08:16.01 | jmls | and ? |
| 08:16.05 | carrar | heh |
| 08:16.06 | BigBadHoss | started |
| 08:16.10 | jmls | yay |
| 08:16.47 | carrar | Let me give you the mailing address where you can send mroe bottles of wine |
| 08:17.17 | BigBadHoss | will boones farm do? |
| 08:17.36 | jmls | BigBadHoss: do yourself a favour - if you're wanting to learn asterisk, use asterisk, not freepbx/trixbox/etc. when you understand how it all works then these are fine frontends but don't help you understand the fundamentals of * |
| 08:18.06 | carrar | yeah |
| 08:18.16 | BigBadHoss | i know, i just dont use zap cards |
| 08:18.20 | carrar | don't waste your time with the PRECANNED crap |
| 08:18.40 | carrar | nothing wrong with zap cards |
| 08:18.45 | carrar | they are awesome |
| 08:18.57 | BigBadHoss | indeed |
| 08:19.03 | jmls | BigBadHoss: anyway, good luck going forwards. |
| 08:19.10 | carrar | I'm a fan of the quad T1 cards myself |
| 08:19.24 | BigBadHoss | if i could afford them, i would use them |
| 08:19.33 | carrar | viognier is good |
| 08:19.35 | carrar | send now |
| 08:19.46 | jmls | hmm. got two of those from digium. slipped frames / hangups etc. Moved to sangoma, not a single problem since |
| 08:20.06 | carrar | well don't pay for them |
| 08:20.12 | carrar | make your customer pay for them |
| 08:20.21 | jmls | I am the customer :) |
| 08:20.25 | carrar | doh! |
| 08:20.29 | carrar | heh |
| 08:21.18 | jmls | carrar: thanks for the help sorting out BigBadHoss |
| 08:21.28 | carrar | np |
| 08:21.36 | BigBadHoss | well |
| 08:21.40 | BigBadHoss | its running |
| 08:21.43 | carrar | I always fail to ask for logs first ) |
| 08:21.44 | BigBadHoss | so its a start |
| 08:21.51 | jmls | ... |
| 08:22.10 | BigBadHoss | how do i configure the manager interface like its supposed to be? |
| 08:22.20 | BigBadHoss | admin/amp111 |
| 08:22.22 | jmls | go to the irc channel for freepbx. |
| 08:22.42 | carrar | CLI OR DIE |
| 08:23.06 | jmls | I've never used freepbx/amp/trixbox etc,you'd be much better off there |
| 08:23.58 | BigBadHoss | well a manager is a * thing right? |
| 08:24.10 | carrar | DEFINE_MANAGER |
| 08:24.33 | carrar | guessing no |
| 08:24.41 | jmls | a manager connection is a * thing |
| 08:24.55 | jmls | in /etc/asterisk/manager.conf |
| 08:24.57 | carrar | I'm thinking web interface pretty manager |
| 08:25.10 | *** join/#asterisk leoman1 (n=leo@70.241.166.244) |
| 08:25.24 | carrar | CLICK on RUN |
| 08:25.38 | carrar | THEN click on USE |
| 08:26.07 | carrar | Did I forget click on START |
| 08:26.12 | leoman1 | Has anyone had this error? : manager.o(.text+0xf66e): In function `init_manager': |
| 08:26.12 | leoman1 | <PROTECTED> |
| 08:26.53 | jmls | more info required - how / where are you getting this error ? |
| 08:26.55 | *** join/#asterisk juanjoc (n=juanjoc@248-32-235-201.fibertel.com.ar) |
| 08:27.01 | leoman1 | root/asterisk/asterisk-1.4.0-beta2/main/manager.c:2622: undefined reference to `ast_extension_state_add' |
| 08:27.12 | leoman1 | running make for asterisk |
| 08:27.12 | carrar | ack |
| 08:27.17 | jmls | yeuw |
| 08:27.27 | BigBadHoss | 1.4!!! |
| 08:27.32 | BigBadHoss | :) |
| 08:27.39 | leoman1 | I know |
| 08:27.48 | jmls | hey, we run 1.4 in production. |
| 08:27.49 | leoman1 | figured I |
| 08:28.01 | leoman1 | figured I'd go with the latest without trouble |
| 08:28.10 | jmls | it's still a beta |
| 08:28.20 | jmls | latest is 1.2.12 or something |
| 08:28.33 | leoman1 | do you suggesst I take a step back to the latest stable? |
| 08:28.35 | carrar | Why not just subversion todays version? |
| 08:28.39 | carrar | heh |
| 08:28.40 | jmls | no, 1.4 does compile |
| 08:28.50 | jmls | don't know why you've got that problem |
| 08:29.06 | BigBadHoss | kernel headers? |
| 08:29.10 | jmls | best thing is to svn the latest 1.4 branch rather than beta2 |
| 08:29.11 | leoman1 | installed a redhat enterprise rl4 |
| 08:29.17 | carrar | he failed to mention he is compiling it on OPENBSD |
| 08:29.28 | jmls | BigBadHoss: no, it's a ast_ thingie |
| 08:29.28 | leoman1 | nope. |
| 08:29.33 | BigBadHoss | oooohhhhhhh |
| 08:29.55 | jmls | checkout the latest 1.4 svn code for zaptel, libpri and asterisk |
| 08:30.10 | leoman1 | ok |
| 08:30.16 | jmls | beta2 has some bugs that have been fixed in the latest svn |
| 08:30.31 | carrar | don't be a wuss |
| 08:30.38 | carrar | use 1.4 Alpha 2 |
| 08:30.40 | leoman1 | svn? know about cvs, but what is svn? |
| 08:30.52 | jmls | subversion. digium uses it instead of cvs |
| 08:31.00 | leoman1 | I see |
| 08:31.10 | jmls | most projects these days do. |
| 08:31.10 | leoman1 | let see about that then. |
| 08:31.11 | leoman1 | thanks |
| 08:31.14 | jmls | np |
| 08:31.46 | jmls | carrar: you may laugh, but one of our servers *is* running 1.4 alpha (taken from svn trunk in July!) |
| 08:31.54 | carrar | hahah |
| 08:32.07 | carrar | What are you using in 1.4 |
| 08:32.13 | jmls | jabber specifically |
| 08:32.21 | carrar | to which country? |
| 08:32.28 | jmls | to our application |
| 08:32.31 | carrar | ah |
| 08:32.38 | carrar | vpn exploit? |
| 08:32.41 | jmls | so it can check agent states and send call information |
| 08:32.42 | carrar | err nat |
| 08:33.11 | jmls | gotta go feed the ankle-biters before they start eating the furniture ... |
| 08:34.10 | leoman1 | he he |
| 08:34.20 | leoman1 | give them bubble gum |
| 08:35.16 | carrar | jmls |
| 08:35.29 | carrar | you should do a hamachi * network! |
| 08:35.36 | carrar | heh |
| 08:36.08 | *** join/#asterisk tuck3r (n=tuck3r@unaffiliated/tuck3r) |
| 08:38.12 | *** join/#asterisk nassy (n=nassy@207-38-197-201.c3-0.wsd-ubr1.qens-wsd.ny.cable.rcn.com) |
| 08:39.42 | BigBadHoss | anybody ready to help me configure the zapata.conf? |
| 08:40.00 | leoman1 | that's not the right question |
| 08:40.11 | BigBadHoss | kidding |
| 08:40.15 | BigBadHoss | can someone? |
| 08:41.03 | BigBadHoss | plz |
| 08:41.43 | leoman1 | you haven't asked a real question |
| 08:42.12 | carrar | ok |
| 08:42.16 | carrar | one last advice |
| 08:42.18 | BigBadHoss | i need to configure it tdm400b |
| 08:42.23 | carrar | http://www.voip-info.org/wiki-Asterisk |
| 08:42.25 | BigBadHoss | module 0 is fxs |
| 08:43.27 | leoman1 | I'm noone to talk about configuring zapata but,from experience , you should ask a targeted question, specific. Not, "I don't know anything about zapata, would someone please guide from a to z?" without reading about it. |
| 08:44.10 | carrar | configure /etc/zaptel.conf 1st |
| 08:44.26 | carrar | then configure /etc/asterisk/zapata.conf |
| 08:45.44 | leoman1 | I used to say that :) |
| 08:46.09 | *** join/#asterisk lorinc (n=ang@caracas-0798.adsl.interware.hu) |
| 09:00.08 | *** join/#asterisk oQPa (i=Ftv@1.Red-83-35-130.dynamicIP.rima-tde.net) |
| 09:03.34 | *** join/#asterisk DarKnesS_WolF (n=wolf@212.103.170.135) |
| 09:06.33 | *** join/#asterisk cian (n=cian@cian.ws) |
| 09:14.34 | *** join/#asterisk sulex (n=sulex@pdpc/supporter/active/sulex) |
| 09:24.21 | BigBadHoss | one last zap question |
| 09:24.35 | BigBadHoss | i am showing my fxo channels, but not my fxs channel |
| 09:24.43 | BigBadHoss | what could be tje problem |
| 09:25.51 | DarKnesS_WolF | BigBadHoss: show me the ztcfg -vvvvvvv output |
| 09:26.15 | DarKnesS_WolF | BigBadHoss: u connected a 5v power right ? |
| 09:26.22 | Marshall16 | yes |
| 09:26.34 | BigBadHoss | ok hang on |
| 09:26.51 | BigBadHoss | Channel 01: FXO Kewlstart (Default) (Slaves: 01) |
| 09:26.51 | BigBadHoss | Channel 03: FXS Kewlstart (Default) (Slaves: 03) |
| 09:26.52 | BigBadHoss | Channel 04: FXS Kewlstart (Default) (Slaves: 04) |
| 09:27.13 | DarKnesS_WolF | BigBadHoss: thats it ? no errors ? |
| 09:27.22 | BigBadHoss | nope |
| 09:27.29 | BigBadHoss | asterisk starts up to |
| 09:27.35 | BigBadHoss | chan 1 is the fxs |
| 09:27.39 | BigBadHoss | the others are fxo |
| 09:27.49 | DarKnesS_WolF | BigBadHoss: ok seems the /etc/zaptel.conf is fine so now what is the problem ? |
| 09:28.08 | BigBadHoss | when i do zap show channels, i only see 3-4 |
| 09:28.12 | BigBadHoss | not 1 |
| 09:28.19 | BigBadHoss | or 0 in module terms |
| 09:29.11 | BigBadHoss | am i supposed to see the fxs card? |
| 09:29.45 | DarKnesS_WolF | BigBadHoss: i think zap show channels will parss out the /etc/astersik/zapata.conf |
| 09:29.55 | DarKnesS_WolF | BigBadHoss: do u have context for each channel there ? |
| 09:30.20 | BigBadHoss | i have group 0 for 3-4 |
| 09:30.25 | BigBadHoss | but nothing for 1 |
| 09:30.29 | BigBadHoss | do i need it? |
| 09:31.15 | DarKnesS_WolF | yes u need it |
| 09:31.25 | DarKnesS_WolF | if u'll use it |
| 09:31.46 | BigBadHoss | what do i need to use for signaling for the fx |
| 09:31.50 | BigBadHoss | fxs |
| 09:32.13 | BigBadHoss | fxsks or fxoks |
| 09:32.19 | DarKnesS_WolF | fxoks |
| 09:32.23 | BigBadHoss | ok |
| 09:32.28 | BigBadHoss | lemme try er out |
| 09:32.38 | BigBadHoss | should i set group=1 since i already have 0 |
| 09:32.39 | DarKnesS_WolF | BigBadHoss: the FXO get signiling as FXS and the FXS get signinling as FXO |
| 09:32.46 | BigBadHoss | i knoiw |
| 09:32.53 | DarKnesS_WolF | BigBadHoss: yes it' depend on ur dialplan logic |
| 09:33.15 | DarKnesS_WolF | i have 2 FXO and 2 FXS each one of the FXS has it's own group |
| 09:33.19 | DarKnesS_WolF | the FXO same group |
| 09:35.16 | *** part/#asterisk _Vile (i=_Vile@198.175.14.242) |
| 09:40.53 | *** join/#asterisk Givur (n=mail@p54BCE540.dip.t-dialin.net) |
| 09:40.57 | Givur | Hi all |
| 09:41.07 | *** join/#asterisk scardinal (n=supreme@port816.ds1-suoe.adsl.cybercity.dk) |
| 09:41.30 | *** part/#asterisk BigBadHoss (n=hoss@65.4.26.233) |
| 09:41.46 | DarKnesS_WolF | hello Givur |
| 09:42.05 | *** join/#asterisk addisonzinser (i=addisonz@dynamic-acs-24-144-221-113.zoominternet.net) |
| 09:44.09 | Givur | I have a question, a customer has ask me about the possibilties for follow scenario: He calls a with his UMTS phone(Videocall) a normal landline number, this gets connected via a VoIP Carrier(SIP or IAX2) to our Asterisk box, the Asterisk box should now record the incoming video stuff. |
| 09:47.33 | *** join/#asterisk gnubien (n=e@147.147.8.67.cfl.res.rr.com) |
| 09:48.17 | gnubien | hi, does the pc or cable modem need be on for grandstream bugetone 101 to work? |
| 09:53.21 | DarKnesS_WolF | gnubien: nop just u need to connect 1st time from web interface to do the confugratiosn then u connect it to the lan and thats it. |
| 09:53.32 | DarKnesS_WolF | Givur: i'm not sure about video recording in * |
| 09:55.16 | gnubien | DarKnesS_WolF: thanks, got any urls for grandstream bugetone 101 linux setup? |
| 09:59.48 | DarKnesS_WolF | gnubien: it'svery easy :P |
| 09:59.50 | Givur | DarKnesS_WolF: Ok, thank you sofar. |
| 10:00.36 | gnubien | DarKnesS_WolF: ok, found the manual for the phone, thanks |
| 10:05.39 | gnubien | DarKnesS_WolF: will connect grandstream to cable model; connet it in series or in parallel with pc connector cable? |
| 10:08.34 | *** join/#asterisk ToTo (n=ToTo@host203-49-dynamic.0-87-r.retail.telecomitalia.it) |
| 10:16.48 | *** join/#asterisk juice (n=juice@mo-76-0-45-81.dhcp.embarqhsd.net) |
| 10:22.27 | *** join/#asterisk DarKnesS_WolF (n=wolf@212.103.170.135) |
| 10:24.36 | *** join/#asterisk Calisto (n=sod@82-38-195-50.cable.ubr04.shef.blueyonder.co.uk) |
| 10:29.58 | *** join/#asterisk nortex (n=nortex@72.16.95.84) |
| 10:32.40 | *** join/#asterisk vgster (n=vgster@cpc2-ledn1-0-0-cust944.leed.cable.ntl.com) |
| 10:47.50 | *** join/#asterisk Assid (i=assid@203.115.83.215) |
| 10:55.45 | *** join/#asterisk zotz (n=zotz@24.244.163.225) |
| 11:31.22 | *** join/#asterisk negativecreep (n=xaeem@host210-2-164-31.isb.dancom.net.pk) |
| 11:31.26 | negativecreep | hi folks |
| 11:31.44 | negativecreep | how can i define a peer which can make calls through me without username/password auth..just ip |
| 11:35.47 | qdk | negativecreep: that would be a user, not a peer. |
| 11:36.13 | negativecreep | i see. |
| 11:36.59 | negativecreep | how can i go about doing that? |
| 11:42.29 | *** part/#asterisk ionel_mc (i=crap@81.180.172.163) |
| 11:43.07 | qdk | negativecreep: read something about it i guess... |
| 11:53.27 | *** join/#asterisk dlynes_laptop (n=dlynes@S01060016b6c052ee.vc.shawcable.net) |
| 11:54.47 | *** join/#asterisk kracker (i=kracker@pdpc/supporter/sustaining/kracker) |
| 11:56.06 | kracker | question, i purchase and have setup a say generic astrisk system, can i route calls through it, record the traffic on those calls (voice) and route that call to my cell phone? |
| 11:56.53 | dlynes_laptop | kracker: yes |
| 11:58.05 | kracker | wow |
| 11:58.39 | kracker | as a consultant i'm on the phone all the time so having a record (simply for review) would be .... wow |
| 12:07.23 | dlynes_laptop | btw |
| 12:07.33 | dlynes_laptop | you can do that with your ultra low tech cellphone, too :) |
| 12:41.12 | *** join/#asterisk VibroMax (n=phisto@83.229.70.154) |
| 12:42.22 | *** join/#asterisk Ebola (n=Ebola@host86-138-123-50.range86-138.btcentralplus.com) |
| 12:50.42 | *** join/#asterisk mosty (n=mostynm@60-241-198-194.static.tpgi.com.au) |
| 12:53.44 | *** join/#asterisk brunner (n=Chris@24-181-118-207.dhcp.mtgm.al.charter.com) |
| 12:53.51 | brunner | does anyone know of a good SIP client for windows? |
| 12:54.38 | xheliox | I typically use Sjphone.. not to say it's good or bad.. |
| 12:56.21 | brunner | thanks |
| 12:56.34 | brunner | that's actually what I was trying to use |
| 12:56.56 | brunner | does anyone have an SIP address I could call to test with? |
| 12:59.05 | r0d3nt|m | crunch.telephreak.org |
| 12:59.21 | r0d3nt|m | 66.0.154.246 |
| 12:59.27 | brunner | thanks |
| 12:59.33 | r0d3nt|m | np. |
| 12:59.44 | mosty | do you need zaptel to use the digium B410P bri card? |
| 13:00.26 | benjk | no |
| 13:00.32 | *** join/#asterisk inv_Arp (i=junya@c-71-206-88-100.hsd1.fl.comcast.net) |
| 13:00.39 | benjk | Digium's BRI doesn't use zaptel |
| 13:01.00 | mosty | benjk, do i just need the latest version of asterisk? ie no kernel modules? |
| 13:01.03 | sx-wks | uses what ? |
| 13:01.27 | benjk | I don't know what it uses but Creslin told me it wasn |
| 13:01.32 | benjk | t Zaprtel based |
| 13:03.08 | r0d3nt|m | benjk, have you seen asterisk latest version get stuck in a loop which generates bajillions of log files ?? |
| 13:03.43 | benjk | I don't use bleeding edge software |
| 13:03.49 | brunner | my friend and I can both connect to crunch.telephreak.org, but we can't connect to eachother. what ports much be open to send or receive calls? |
| 13:04.04 | r0d3nt|m | benjk, not cvs, release standard versions. |
| 13:04.15 | benjk | brunner, you're probably both behind NAT |
| 13:04.23 | benjk | simply opening ports won't help |
| 13:04.34 | brunner | benjk: I am, I'm not sure if he is |
| 13:04.47 | brunner | err, wait, he's not |
| 13:05.15 | r0d3nt|m | benjk, Asterisk 1.2.12.1 |
| 13:05.16 | benjk | he's not and you are, still sounds like a NAT issue |
| 13:05.28 | benjk | rodent|m I use BRIstuff stable |
| 13:05.38 | benjk | that means Asterisk 1.0.x |
| 13:05.41 | brunner | right, so what should I adjust on my NAT? |
| 13:05.56 | r0d3nt|m | benjk, i understand.. ok thanks.. so you haven't seen this issue... =) |
| 13:06.19 | benjk | I saw somebody talking about it |
| 13:06.20 | brunner | 5060? |
| 13:06.29 | benjk | brunner 5060 is only half |
| 13:06.35 | benjk | the other half is random |
| 13:06.48 | r0d3nt|m | brunner, it's more complicated than that, you'll need a stun server or a 3rd party of some sort to manage your calls if you're both behind nat |
| 13:07.05 | brunner | I see |
| 13:07.27 | r0d3nt|m | brunner, stun server, an asterisk server, etc.. |
| 13:07.51 | benjk | OpenPBX has STUN support, you might want to use that |
| 13:08.16 | brunner | alright |
| 13:08.17 | brunner | thanks |
| 13:08.20 | benjk | its a fork of Asterisk |
| 13:10.26 | *** join/#asterisk tzafrir (n=tzafrir@62.90.10.53) |
| 13:13.38 | *** join/#asterisk qdk (n=qdk@213.150.62.32) |
| 13:19.02 | *** join/#asterisk [TK]D-Fender (n=joe@64.235.216.2) |
| 13:19.22 | dlynes_laptop | good morning, [TK]D-Fender |
| 13:22.40 | *** join/#asterisk cian (n=cian@cian.ws) |
| 13:24.20 | *** join/#asterisk inv_Arp (i=junya@c-71-206-88-100.hsd1.fl.comcast.net) |
| 13:24.23 | *** join/#asterisk DarKnesS_WolF (n=wolf@196.218.71.150) |
| 13:36.07 | *** join/#asterisk _MDC_ (n=marcus@c-6efde255.06-72-6c6b7013.cust.bredbandsbolaget.se) |
| 13:39.31 | _MDC_ | I'm trying to register to my provider using sip with register => uid:pwd@host, but the problem is that i'm behind nat and therefore I want to sent my public ip in that register packet, I tried externip but still I got contact: s@192.168.100.60.. What else could I try? |
| 13:42.45 | *** join/#asterisk cian (n=cian@cian.ws) |
| 13:43.16 | mosty | does anyone know how to get the latest version of misdn? the cvs checkout instructions in their howto don't work |
| 13:44.39 | mosty | ahh, i got it |
| 13:44.58 | *** join/#asterisk hyphen (n=hyphen@71.224.213.97) |
| 13:57.35 | mosty | i can't find an misdn kernel patch for anything newer than 2.6.3-rc2 - is it that old? |
| 14:01.03 | *** join/#asterisk cian (n=cian@cian.ws) |
| 14:01.33 | *** join/#asterisk cian (n=cian@cian.ws) |
| 14:03.25 | *** join/#asterisk Givur (n=mail@p54BCE540.dip.t-dialin.net) |
| 14:07.17 | wmandra | marning all |
| 14:09.45 | *** join/#asterisk Sasch (n=Admin@host102-30-static.107-82-b.business.telecomitalia.it) |
| 14:10.01 | DarKnesS_WolF | _MDC_: i didn't get it ur regster from ur asterisk server to ur SIP provider .. where u can see s@virtual_ip thing ? |
| 14:11.14 | _MDC_ | DarKnesS_WolF, with sip debug |
| 14:11.53 | DarKnesS_WolF | _MDC_: the RealIP gets rewritein in the router not in asterisk ! |
| 14:12.01 | DarKnesS_WolF | _MDC_: thats what i know |
| 14:12.37 | _MDC_ | DarKnesS_WolF, well then I have to have some sip nat module, which I don't... |
| 14:12.59 | DarKnesS_WolF | _MDC_: so if u did sip show register what u'll see ? |
| 14:14.14 | _MDC_ | I just talked to my provider who enabled NAT on me.. I'll se if it works now.. brbr |
| 14:21.19 | wmandra | _MDC_: pastebin your sip.conf masking the passwords.... |
| 14:22.04 | _MDC_ | everything is now allright after talking to my sip provider, thanks for your help! |
| 14:22.11 | *** join/#asterisk xnon (n=xnon@200.8.31.93) |
| 14:23.37 | DarKnesS_WolF | _MDC_: good |
| 14:42.40 | *** join/#asterisk Splat (n=Splat@220-253-107-59.TAS.netspace.net.au) |
| 15:03.00 | *** join/#asterisk florz (i=nobody@2001:1a50:503c:0:0:0:0:1) |
| 15:07.08 | *** join/#asterisk [ProB]CrazyM (n=tobias@pD9E9073F.dip0.t-ipconnect.de) |
| 15:17.37 | *** join/#asterisk bjohnson (n=bjohnson@i216-58-9-125.cybersurf.com) |
| 15:17.38 | *** join/#asterisk twanny (n=leopardu@195.158.76.61) |
| 15:41.09 | *** join/#asterisk xnon (i=xnon@200.8.31.93) |
| 15:57.36 | *** join/#asterisk qdk (n=qdk@0x535eae17.boanxx9.adsl-dhcp.tele.dk) |
| 16:15.08 | *** join/#asterisk Givur (n=mail@p54BCE2CA.dip.t-dialin.net) |
| 16:16.47 | *** join/#asterisk wunderkin (i=kev@ip72-208-3-42.ph.ph.cox.net) |
| 16:22.52 | *** join/#asterisk sb_mx (n=sb_mx@189.135.63.213) |
| 16:24.54 | *** join/#asterisk waba (n=waba@eott.enix.org) |
| 16:35.13 | *** join/#asterisk mog (i=ejabberd@c-71-207-215-93.hsd1.al.comcast.net) |
| 16:35.13 | *** mode/#asterisk [+o mog] by ChanServ |
| 16:43.12 | *** join/#asterisk dasenjo (n=dasenjo@63.245.86.105) |
| 16:46.11 | *** join/#asterisk DarKnesS_WolF (n=wolf@196.218.72.212) |
| 16:58.03 | *** join/#asterisk vgster (n=vgster@81.96.139.177) |
| 17:00.28 | *** join/#asterisk eltech (i=G00Ds@ool-457c9421.dyn.optonline.net) |
| 17:01.56 | *** join/#asterisk freebsd_fan (n=unsure@sw69x3.foto.gu.se) |
| 17:02.30 | *** part/#asterisk waba (n=waba@eott.enix.org) |
| 17:02.52 | marcus2 | has anyone here done anything with jingle? |
| 17:04.40 | *** join/#asterisk twanny (n=leopardu@195.158.76.61) |
| 17:05.04 | twanny | hello : anyone knows a link to the builtin extensions of 'trixbox'? |
| 17:05.24 | twanny | hello : anyone knows a link to the builtin extensions of 'trixbox'? |
| 17:05.58 | twanny | .. |
| 17:06.43 | *** join/#asterisk jhassine-lap (n=jhassine@smtp.brainalliance.com) |
| 17:07.00 | jhassine-lap | what does this mean SIP/sip_proxy-out-082164f8 is circuit-busy ? |
| 17:11.48 | *** join/#asterisk Eliran_Itzhak (n=eliran@bzq-88-152-190-223.red.bezeqint.net) |
| 17:12.31 | *** join/#asterisk linlin (i=linlin@c-67-173-49-55.hsd1.il.comcast.net) |
| 17:12.32 | *** join/#asterisk jaike (i=jaike@124.106.191.5) |
| 17:13.37 | *** join/#asterisk ghenry (n=ghenry@mail.suretecsystems.com) |
| 17:15.34 | jhassine-lap | <PROTECTED> |
| 17:16.00 | *** join/#asterisk h3x` (n=leet@6.160-244-81.adsl-dyn.isp.belgacom.be) |
| 17:16.07 | *** part/#asterisk h3x` (n=leet@6.160-244-81.adsl-dyn.isp.belgacom.be) |
| 17:16.42 | twanny | exit |
| 17:19.52 | *** join/#asterisk eltech (n=eltech@ool-457c9421.dyn.optonline.net) |
| 17:22.58 | *** join/#asterisk eltech (i=G00Ds@ool-457c9421.dyn.optonline.net) |
| 17:23.09 | *** part/#asterisk jaike (i=jaike@124.106.191.5) |
| 17:24.52 | *** join/#asterisk eltech (i=G00Ds@ool-457c9421.dyn.optonline.net) |
| 17:31.19 | *** join/#asterisk jhassine-lap_ (n=jhassine@smtp.brainalliance.com) |
| 17:34.19 | *** join/#asterisk aao_pwner (n=aao_pwne@c-24-21-91-140.hsd1.wa.comcast.net) |
| 17:46.59 | SpaceBass | hey folks |
| 17:47.05 | SpaceBass | I have a security related question |
| 17:47.48 | SpaceBass | I have a wifi phone that only supports WEP...worthless....i used to use it via an unencrypted AP that was on a seperate subnet w/ NAT to my LAN that has my * box |
| 17:48.15 | SpaceBass | but I upgraded my router to a BSD based system that doesnt do so well with nat b/t subnets...long story short, it doesnt work |
| 17:48.56 | SpaceBass | so I'm thinking of putting a 2nd NIC in my * box and running an open AP on it....private address ranges...but that basically makes my asterisk box wide open to the outside world.... does that put my lan at risk also? |
| 17:49.31 | *** join/#asterisk cian (n=cian@cian.ws) |
| 17:53.03 | wmandra | spacebass: i had a similar situation..... my solution was to upgrade the AP to one that supported multiple SSIDs on different VLANS. |
| 17:53.26 | SpaceBass | wmandra, well thats basically no different than using a 2nd AP, which I'm doing now |
| 17:53.56 | SpaceBass | what I prefered was to have my open AP on a subnet with NAT back to my asterisk box...but that broke when I changed routers |
| 17:54.14 | *** join/#asterisk saftsack (n=saftsack@p54A7CD51.dip.t-dialin.net) |
| 17:54.28 | saftsack | hi |
| 17:54.36 | saftsack | does asterisk provide click2dial? |
| 17:54.39 | wmandra | just don't use NAT.... use seperate VLANS with ACLs on the router to limit the traffic that can pass between the VLANS |
| 17:55.01 | SpaceBass | using something like a cisco aironet? |
| 17:55.07 | wmandra | yup |
| 17:55.56 | wmandra | with the aironet APs you can even have a RADIUS server force a prticular device onto a specific VLAN |
| 17:56.40 | SpaceBass | not a bad solution...but little more expensive than I'd hope for for a home setup |
| 17:57.54 | *** join/#asterisk DarKnesS_WolF (n=wolf@196.218.71.150) |
| 17:58.00 | wmandra | you can get the aironet 1100 on ebay pretty cheap...... also the signal strength is unbelievable..... i get almost twice the distance tna i did with a linksys or dlink AP |
| 17:58.16 | *** join/#asterisk xnon (i=xnon@200.8.31.93) |
| 18:01.22 | *** join/#asterisk rustyb (i=rustyb@68-235-135-252.atlsfl.adelphia.net) |
| 18:01.23 | *** part/#asterisk mog (i=ejabberd@c-71-207-215-93.hsd1.al.comcast.net) |
| 18:02.15 | wmandra | saftsack: there are 3rd party apps available for click-to-dial support check http://voip-info.org |
| 18:03.46 | *** join/#asterisk cian (n=cian@cian.ws) |
| 18:03.53 | wmandra | saftsac: if your using windows I would recommend snapanumber.com |
| 18:09.04 | *** join/#asterisk mog (i=ejabberd@c-71-207-215-93.hsd1.al.comcast.net) |
| 18:09.04 | *** mode/#asterisk [+o mog] by ChanServ |
| 18:13.50 | *** join/#asterisk audial (n=root@87.240.28.34) |
| 18:15.19 | *** join/#asterisk unimprtnt (n=unimprtn@pool-72-90-159-136.nwrknj.east.verizon.net) |
| 18:15.26 | audial | hello =] i have a problem with compiling *, i need to add additional channel, not existed in trunk. Where i have to set the source file and the libs for compiling it? |
| 18:15.41 | audial | i use the HEAD version |
| 18:16.17 | *** part/#asterisk unimprtnt (n=unimprtn@pool-72-90-159-136.nwrknj.east.verizon.net) |
| 18:16.41 | audial | it seems to me that i have to set it in ./menuselect/ files but i dont know exactly which of them 8\ do u know? |
| 18:17.03 | *** join/#asterisk sulex (n=sulex@pdpc/supporter/active/sulex) |
| 18:18.37 | audial | anybody home? ;) |
| 18:18.41 | *** join/#asterisk jhassine-lap (n=jhassine@smtp.brainalliance.com) |
| 18:18.57 | *** join/#asterisk drcode (n=chatzill@87.69.59.186.cable.012.net.il) |
| 18:18.59 | drcode | hi all |
| 18:21.03 | drcode | any one up |
| 18:23.10 | xheliox | I just woke up :P |
| 18:23.41 | drcode | I want to check if pepole from out side can register to my ast box, someone can try ? |
| 18:23.59 | audial | drcode: yes) |
| 18:26.43 | *** join/#asterisk JonR800 (i=jon@p1mp.org) |
| 18:27.45 | *** join/#asterisk jo3sm1th (i=jo3sm1th@106.sub-70-194-136.myvzw.com) |
| 18:33.19 | *** join/#asterisk RaYmAn-Bx (i=rayman@kbhn-vbrg-sr0-vl212-213-185-15-16.perspektivbredband.net) |
| 18:37.23 | *** join/#asterisk eltech (i=G00Ds@ool-457c9421.dyn.optonline.net) |
| 18:44.36 | *** join/#asterisk cian (n=cian@cian.ws) |
| 19:08.06 | Marshall16 | how do i set my callerid number in asterisk? |
| 19:09.49 | jhassine-lap | unknown rtp codec 102 |
| 19:14.23 | *** join/#asterisk jtexter3 (n=jtexter3@ip68-97-73-114.ok.ok.cox.net) |
| 19:17.05 | *** join/#asterisk Eliran_Itzhak (n=eliran@bzq-88-152-190-223.red.bezeqint.net) |
| 19:19.22 | *** join/#asterisk groogs_ (n=chatzill@cbl-66-102-80-249.wtccommunications.ca) |
| 19:21.00 | groogs_ | is it possible to use the asterisk manager interface to execute programs? from the CLI I can do "!/some/program" but if i send the astman "command" with !/some/program, it returns "Privilege: Command No such command '!/var/lib/asterisk/bin/retrieve_conf' (type 'help' for help) " |
| 19:30.43 | *** join/#asterisk angom_h (n=Angel@red-corp-201.130.156.15.telnor.net) |
| 19:37.07 | *** join/#asterisk jtexter3 (n=jtexter3@ip68-97-73-114.ok.ok.cox.net) |
| 19:37.39 | audial | *CLI> ! echo '1' |
| 19:37.39 | audial | 1 |
| 19:37.45 | audial | it works =) |
| 19:38.22 | audial | groogs_: may be you have incorrect privileges? |
| 19:38.48 | groogs_ | yeah, it works from CLI |
| 19:38.54 | groogs_ | i'm trying to do it from the manager interface |
| 19:39.24 | audial | agi ? |
| 19:40.20 | groogs_ | http://www.voip-info.org/wiki/view/Asterisk+manager+API |
| 19:48.35 | *** join/#asterisk xnon (i=xnon@200.8.31.93) |
| 19:49.29 | groogs_ | hm.. using "! command" (space) doesn't report any error, but doesn't seem to run the command either |
| 19:49.46 | groogs_ | ["data"]=> string(20) "Privilege: Command " ["Response"]=> string(7) "Follows" |
| 19:52.01 | *** join/#asterisk cian (n=cian@cian.ws) |
| 19:59.54 | *** join/#asterisk cian (n=cian@cian.ws) |
| 20:06.55 | drcode | can I get sms in asteriks or send sms? |
| 20:09.53 | joe | drcode: http://www.voip-info.org/wiki-Asterisk+cmd+Sms |
| 20:10.29 | *** part/#asterisk angom_h (n=Angel@red-corp-201.130.156.15.telnor.net) |
| 20:11.01 | drcode | joe: do fxo card can also send sms? |
| 20:12.13 | drcode | or its by hardware card? |
| 20:13.26 | ghenry | anyone know of any messages/sms you can send via wifi handsets? |
| 20:13.40 | ghenry | SIP messenging? |
| 20:14.18 | drcode | joe: the sms send and recive depend on fxo card? |
| 20:14.29 | *** join/#asterisk Mad_guy (n=austin@ip68-1-213-212.dl.dl.cox.net) |
| 20:14.57 | *** join/#asterisk SpaceBass (n=sp@static-71-251-230-6.rcmdva.fios.verizon.net) |
| 20:14.59 | SpaceBass | hey folks |
| 20:15.09 | ghenry | hey |
| 20:15.33 | SpaceBass | where can I configure the address that asterisk sends to devices? |
| 20:16.06 | ghenry | what address? |
| 20:16.11 | SpaceBass | i have externip in sip.conf |
| 20:16.17 | SpaceBass | but its sending that address to lan clients too |
| 20:16.34 | ghenry | nat settings in there too |
| 20:17.08 | file | have you set localnet so chan_sip knows what is local? |
| 20:17.25 | SpaceBass | i do have localnet |
| 20:17.30 | SpaceBass | is there a localip setting I can set? |
| 20:18.20 | file | no, if properly configured externip will only be put in when the device doesn't come from anything in the localnet range |
| 20:18.28 | SpaceBass | hummm |
| 20:18.35 | SpaceBass | think I see the problem now |
| 20:18.47 | SpaceBass | I'm having one way audio issues with a wifi phone that is on a different subnet |
| 20:18.53 | *** join/#asterisk cian (n=cian@cian.ws) |
| 20:19.06 | SpaceBass | so, according to what I have set in localnet the wifi phone is external |
| 20:19.13 | SpaceBass | can I have another localnet setting? |
| 20:19.27 | file | try and see. |
| 20:19.44 | SpaceBass | lol |
| 20:20.57 | *** join/#asterisk Brime (n=Brime@207-118-85-187.dyn.centurytel.net) |
| 20:21.24 | *** join/#asterisk cian (n=cian@cian.ws) |
| 20:21.27 | SpaceBass | wow...that worked |
| 20:21.43 | Brime | Hello |
| 20:21.47 | SpaceBass | THAT WORKED! |
| 20:22.07 | *** join/#asterisk Ifaistos (n=stelios@dslcustomer169.vivodi.gr) |
| 20:22.09 | SpaceBass | Iv'e been without a cordless phone for 6 months...and I rebuild my router 2x and have been blaming the router...and that was it |
| 20:22.12 | *** join/#asterisk cian (n=cian@cian.ws) |
| 20:22.20 | Ifaistos | greetings ! |
| 20:22.50 | drcode | joe: I need fxo card? |
| 20:22.53 | *** join/#asterisk joat (n=joat@ip70-160-147-169.hr.hr.cox.net) |
| 20:23.51 | drcode | http://www.codeproject.com/useritems/The_Bridge.asp |
| 20:24.09 | Brime | some one I know needs a cheap teleconferencing system |
| 20:28.18 | *** join/#asterisk cian (n=cian@cian.ws) |
| 20:29.13 | *** join/#asterisk mart- (n=martin@82-39-249-44.cable.ubr03.newy.blueyonder.co.uk) |
| 20:30.45 | mart- | anyone happen to have a link to something that compares how much CPU is required for a given number of streams, please? I'm sure I've read about it somewhere... |
| 20:31.18 | JonR800 | mart-: http://www.voip-info.org/tiki-index.php?page=Asterisk+dimensioning |
| 20:31.20 | *** join/#asterisk jhassine-lap (n=jhassine@cs181016045.pp.htv.fi) |
| 20:32.23 | mart- | JonR800: that's not what I've seen before, but I'll have a read. thanks. |
| 20:32.54 | JonR800 | np hope it helps |
| 20:33.16 | *** join/#asterisk Assid (n=assid@59.183.0.67) |
| 20:33.33 | *** join/#asterisk jhassine-lap_ (n=jhassine@cs181016045.pp.htv.fi) |
| 20:37.29 | *** join/#asterisk Cyt (n=danielcy@158.Red-80-25-12.staticIP.rima-tde.net) |
| 20:43.58 | *** join/#asterisk DEader (n=de2@ool-44c6a5c2.dyn.optonline.net) |
| 20:44.18 | DEader | is there a special hardware or something to make meet me work ? |
| 20:44.28 | DEader | meetme in asterisk |
| 20:46.47 | *** join/#asterisk test34 (n=test34@unaffiliated/test34) |
| 20:49.27 | *** join/#asterisk hads (n=hads@mail.nice.net.nz) |
| 20:51.24 | jtexter3 | DEader: what issues are you having with meetme? |
| 20:52.36 | *** join/#asterisk tsurk0 (n=tsurko@vpn-pppoe-213-240-242-237.megalan.bg) |
| 21:01.39 | *** join/#asterisk foxxtrot (n=craig@c-67-185-55-194.hsd1.wa.comcast.net) |
| 21:03.08 | *** join/#asterisk Eliran_Itzhak (n=eliran@bzq-88-152-190-223.red.bezeqint.net) |
| 21:09.37 | *** join/#asterisk bjohnson_ (n=bjohnson@i216-58-94-249.cybersurf.com) |
| 21:27.25 | *** join/#asterisk cian (n=cian@cian.ws) |
| 21:27.48 | *** join/#asterisk mitcheloc (n=mitchelo@titaniumsoft.net) |
| 21:33.46 | robin_sz | Deeewayne, |
| 21:33.50 | robin_sz | oops. |
| 21:37.02 | *** join/#asterisk Iamnacho (i=Iamnacho@ip68-103-140-124.ks.ok.cox.net) |
| 21:37.34 | *** join/#asterisk ToTo (n=ToTo@host203-49-dynamic.0-87-r.retail.telecomitalia.it) |
| 21:40.13 | qdk | hmm... my SJphone connects fine to the server through SIP, but I get 404 no matter what i dial in SJphone and asterisk CLI doesnt show anything, what could be the problem? |
| 21:41.46 | *** part/#asterisk crochat (i=crochat@84-74-145-66.dclient.hispeed.ch) |
| 21:44.20 | *** part/#asterisk jmls (n=asterisk@host81-159-167-80.range81-159.btcentralplus.com) |
| 21:50.15 | *** join/#asterisk sevard (n=sev@c-67-188-173-23.hsd1.ca.comcast.net) |
| 21:53.52 | *** join/#asterisk riddlebox (n=james@24-171-10-102.dhcp.stls.mo.charter.com) |
| 21:54.52 | Ifaistos | qdk: check your dialplan for errors. It's the most common problem that shows uo like this |
| 21:56.21 | qdk | Ifaistos: ok, thx. i have ; a lot... think ill make a completely new and test with bare minimum. |
| 21:57.23 | Ifaistos | Anyone going to the astricon ? |
| 21:58.54 | qdk | Ifaistos: lol... i typed zip in stead of sip in my context in sip.conf. |
| 21:59.04 | qdk | Ifaistos: like for it? |
| 21:59.08 | qdk | link* |
| 22:03.38 | *** part/#asterisk CtRiX (n=CtRiX@aretha.navynet.it) |
| 22:05.25 | *** join/#asterisk CtRiX (n=CtRiX@aretha.navynet.it) |
| 22:06.46 | groogs_ | anyone from digium here? bugs.digium.org: PROBLEMS SENDING MAIL TO: ...... Mailer Error: Could not instantiate mail function. |
| 22:09.34 | *** join/#asterisk X-Rob (n=Rob@dsl-202-173-151-24.qld.westnet.com.au) |
| 22:12.12 | *** join/#asterisk ToTo (n=ToTo@host203-49-dynamic.0-87-r.retail.telecomitalia.it) |
| 22:12.52 | brimstone | groogs_, i made sure people know about that, thanks! |
| 22:17.26 | *** join/#asterisk Juggie (i=agony@CPE00c049d9f271-CM00137186c8d8.cpe.net.cable.rogers.com) |
| 22:20.57 | *** join/#asterisk Dovid (n=Dovid@barak.cellcom.co.il) |
| 22:21.34 | Dovid | morning all |
| 22:22.38 | Dovid | anyone seeing my messages ? nothing comin up. thinkin its my irc client |
| 22:23.05 | Nugget | Moo. |
| 22:23.23 | Dovid | ok |
| 22:23.26 | Dovid | its workin ;) |
| 22:25.23 | *** join/#asterisk De_Mon (n=de_mon@fl-69-69-141-171.dyn.embarqhsd.net) |
| 22:28.54 | Nugget | http://nugget.livejournal.com/114095.html |
| 22:30.51 | Nivex | dammit, now I have an urge to buy chicken McNuggets |
| 22:30.52 | Nivex | :) |
| 22:32.50 | sivana | can res_js connect to a database? |
| 22:34.14 | Dovid | re_js is ? |
| 22:34.53 | sivana | javascript |
| 22:35.30 | Dovid | dont know much java :( |
| 22:35.44 | sivana | I need to build a survey, simple 5 questions, 1 level, but needs to be stored in db |
| 22:36.06 | Dovid | ok |
| 22:36.17 | sivana | trying to figure out the best way |
| 22:36.21 | Dovid | sivana: u can use an agi |
| 22:36.45 | Dovid | well ur gona need agi to send to the db |
| 22:37.08 | Dovid | the question is if u want the whole call to be agi cause it can be cpu intensive |
| 22:37.13 | Dovid | agi can be written in php or perl |
| 22:37.17 | sivana | ya |
| 22:37.55 | sivana | probably the entire call |
| 22:38.02 | Dovid | how many concurent calls /. |
| 22:38.04 | Dovid | ?* |
| 22:38.17 | Dovid | cause they can be cpu intensive. |
| 22:38.49 | sivana | not sure exactly |
| 22:38.55 | sivana | probably not alot |
| 22:39.16 | Dovid | i have had whole calls in agi with no problem but not many calls and it was a good box |
| 22:44.51 | *** part/#asterisk mog (i=ejabberd@c-71-207-215-93.hsd1.al.comcast.net) |
| 22:46.13 | JT | ~thebook |
| 22:46.14 | jbot | [thebook] a book called Asterisk: The Future of Telephony which is found at http://www.asteriskdocs.org/modules/tinycontent/index.php?id=11 |
| 22:54.36 | *** join/#asterisk lucaferr (n=lucaferr@h229n1fls305o1037.telia.com) |
| 22:55.59 | *** join/#asterisk robin_z (n=you@adsl.redpoint.org.uk) |
| 22:59.53 | qdk | anyone have an idea to why an x-lite client has a SIP ping of 130ms, when the ICMP ping is about 15ms? |
| 23:09.28 | *** join/#asterisk kronic (n=gnorman@mail.stabat.com) |
| 23:09.40 | benjk | how do you measure the SIP ping? |
| 23:10.27 | qdk | benjk: sip list peers |
| 23:10.44 | benjk | from the asterisk console? |
| 23:10.49 | qdk | yes, cli |
| 23:10.59 | benjk | I doubt that's anywhere near accurate |
| 23:11.14 | robin_z | and .. why does not my CLI a dial command be having? |
| 23:11.51 | qdk | Name/username Host Dyn Nat ACL Port Status |
| 23:11.51 | qdk | peavey/peavey xx.yy.92.235 D N 55786 OK (127 ms) |
| 23:11.51 | qdk | kok/kok xx.yy.174.23 D N 5060 OK (20 ms) |
| 23:12.48 | robin_z | you have a user called Kok? |
| 23:12.54 | qdk | yes |
| 23:12.57 | robin_z | coo. |
| 23:12.59 | benjk | I have often noticed that the lag the CLI shows me was totally out of whack for one entry while it was roughly ok for others etc etc |
| 23:13.23 | qdk | benjk: ok |
| 23:13.30 | benjk | and also, it often takes a very long time for those values to change |
| 23:13.44 | benjk | even if they did change in reality |
| 23:13.58 | qdk | benjk: here is a small delay on the conversation and i suspect the SIP latency to be the reason. |
| 23:14.05 | benjk | I believe the measurement runs on a failry low priority thread |
| 23:14.31 | qdk | the server is doing _nothing_ |
| 23:14.34 | robin_z | hmmm ... when did "sip list peers" get included in *? |
| 23:14.42 | benjk | sip show peers |
| 23:14.48 | robin_z | mine has "sip show peers" ... |
| 23:14.50 | benjk | was always there |
| 23:14.56 | qdk | robin_sz: show is deprecated. |
| 23:15.11 | benjk | not for me |
| 23:15.20 | robin_z | not in mine its not .. 1.2.9.1 |
| 23:15.34 | qdk | 3 sip peers [Monitored: 2 online, 1 offline Unmonitored: 0 online, 0 offline] |
| 23:15.34 | qdk | The 'sip show peers' command is deprecated and will be removed in a future release. Please use 'sip list peers' instead. |
| 23:15.34 | qdk | *CLI |
| 23:15.41 | benjk | if I ever do 1.4 which I doubt I will, that would be the first thing I change back |
| 23:15.55 | robin_z | qdk: you are on 1.4? |
| 23:16.20 | robin_z | debian*CLI> sip list peers |
| 23:16.20 | robin_z | No such command 'sip list' (type 'help' for help) |
| 23:16.24 | qdk | robin_sz: yes. i mentioned earlier, but i guess you wasnt here. |
| 23:16.29 | robin_z | 'k |
| 23:17.14 | robin_z | hmm .. and my peers all have "Unmonitored" ... do i have to do something to make them monitored? |
| 23:17.27 | benjk | qualify = yes |
| 23:17.32 | robin_z | 'k |
| 23:18.37 | benjk | there are so many total misnomers in Asterisk |
| 23:19.06 | benjk | yet they don't care about correcting those, instead they care about changing names which are perfectly ok |
| 23:19.19 | benjk | go figure |
| 23:20.38 | robin_z | id settle for them doing something acheivabel and useful |
| 23:20.50 | robin_z | like including support for HFC based isdn cards |
| 23:20.52 | benjk | for example Macro() |
| 23:20.58 | benjk | that's a misnomer |
| 23:21.02 | benjk | its not a macro |
| 23:21.05 | benjk | its a procedure |
| 23:21.10 | robin_z | its a funcition |
| 23:21.26 | benjk | no it doesn't return any value thus a procedure call |
| 23:21.39 | robin_z | point |
| 23:21.39 | benjk | but it executes in its own stack, so its not a macro |
| 23:22.00 | Juggie | whats the point |
| 23:22.06 | qdk | benjk: show is for details of a single account now... and list is for lists. :-) |
| 23:22.25 | benjk | there are other such misnomers, but of course "show" definitely requires changing |
| 23:22.46 | Juggie | feel free to bring up any on the -dev list. |
| 23:22.58 | benjk | been there done that |
| 23:23.17 | robin_z | im getting all worried about this HFC card now ... telco is changing the line in 5 days ... |
| 23:23.29 | benjk | what's the problem with it? |
| 23:23.37 | robin_z | well .... |
| 23:24.13 | robin_z | debian:/etc/asterisk# cat /proc/zaptel/2 |
| 23:24.13 | robin_z | Span 2: ZTHFC1 "HFC-S PCI A ISDN card 0 [TE] layer 1 DEACTIVATED (F4)" AMI/CCS |
| 23:24.22 | robin_z | thats "deactivated" word ... |
| 23:24.34 | robin_z | and ... |
| 23:24.35 | benjk | zaphfc? |
| 23:24.39 | robin_z | yeah |
| 23:24.51 | benjk | did you use BRIstuff? |
| 23:24.56 | robin_z | I did |
| 23:25.21 | robin_z | on the CLI .. i get this every second |
| 23:25.26 | robin_z | Oct 16 00:25:10 WARNING[2711]: chan_zap.c:2506 pri_find_dchan: No D-channels available! Using Primary channel 4 as D-channel anyway! |
| 23:25.43 | benjk | did you use BRIstuff to download Asterisk and patch or did you run it against a copy you got directly? |
| 23:25.54 | robin_z | I let it do its own ting |
| 23:26.10 | benjk | so it downloaded asterisk for you, right? |
| 23:26.17 | robin_z | yeah |
| 23:26.20 | benjk | ok |
| 23:27.01 | robin_z | I was considering trying tzafrir's rapid thing |
| 23:27.27 | benjk | can you try with the stable version of BRIstuff? |
| 23:27.31 | benjk | just to compare |
| 23:27.38 | robin_z | dunno? |
| 23:27.43 | benjk | because that's what I am using and it works like a charm |
| 23:27.52 | robin_z | im using: |
| 23:27.59 | benjk | the stable version is using Asterisk 1.0.x |
| 23:28.04 | robin_z | bristuff-0.3.0-PRE-1r |
| 23:28.38 | benjk | yeah, that's "experimental" |
| 23:28.52 | robin_z | i'll try ./compile.sh again and see if I notice anything dangerous |
| 23:29.18 | benjk | did you configure your D-channel ? |
| 23:29.22 | benjk | should be 3 not 4 |
| 23:29.27 | robin_z | sure? |
| 23:29.32 | benjk | yes |
| 23:29.35 | benjk | 2B+D |
| 23:29.40 | robin_z | I have a x100p on span 1 |
| 23:29.43 | benjk | channel 1 and 2 are for voice |
| 23:29.53 | benjk | ah ok |
| 23:30.04 | benjk | try doing without that |
| 23:30.16 | benjk | see if it makes a difference |
| 23:30.47 | benjk | or, try moving the X100 to channel 4 |
| 23:30.55 | robin_z | might be hard |
| 23:30.57 | qdk | hmm. i think that x-lite is junk, coz with adore the SIP ping is good, and the is _no_ delay on the conversation. |
| 23:31.00 | benjk | then channels 1 and 2 for BRI and 3 for the D channel |
| 23:31.41 | benjk | not hard, all you have to do is edit your zaptel config to say that the X100P is channel=4 |
| 23:32.13 | *** join/#asterisk tlp (i=tlp@71-33-103-74.bois.qwest.net) |
| 23:32.15 | benjk | qdk, xlite == total resource hog |
| 23:32.39 | *** join/#asterisk lucaferr (n=lucaferr@h229n1fls305o1037.telia.com) |
| 23:33.19 | robin_z | good old Justin |
| 23:34.07 | robin_z | Warning: could not find versions for .tmp_versions/zaptel.mod |
| 23:34.07 | robin_z | make[1]: Leaving directory `/usr/src/kernel-headers-2.6.8-2-686-smp' |
| 23:34.07 | robin_z | build_tools/genudevrules > /etc/udev/rules.d/zaptel.rules |
| 23:34.07 | robin_z | build_tools/genudevrules: line 1: udevinfo: command not found |
| 23:34.09 | robin_z | oopsie. |
| 23:34.57 | qdk | benjk: ok. |
| 23:36.20 | robin_z | see if its any better after installing the udev stuff |
| 23:41.59 | *** join/#asterisk SECGOD (i=SECGOD@c-71-57-36-106.hsd1.il.comcast.net) |
| 23:42.42 | *** join/#asterisk Dovid (n=Dovid@barak.cellcom.co.il) |
| 23:49.14 | benjk | ah yes, the udev rules gave me some troubles when I started |
| 23:54.59 | robin_z | hmmm |
| 23:55.11 | robin_z | I had zaphfc already installed by hand ... |
| 23:55.21 | robin_z | but the bristuff fails to compile it ... |
| 23:55.47 | robin_z | the last one compiled itself using the kernel 'build' links to the headers etc |
| 23:56.00 | robin_z | this one seems to want to kernel src itself for some reason |
| 23:57.32 | Dovid | u allways need the kernel src for asterisk |
| 23:58.15 | benjk | not for asterisk, but for zaptel |
| 23:58.18 | robin_z | nah |
| 23:58.27 | robin_z | ona 2,6 kernel? |
| 23:58.39 | benjk | on 2.6 you need the headers |
| 23:58.43 | robin_z | kernel headers yes |
| 23:58.46 | robin_z | but source? |
| 23:59.00 | benjk | depends onthe makefile though |
| 23:59.07 | robin_z | quite |
| 23:59.28 | robin_z | whatever, i'll let it try with the source ... if it keeps it happy ;) |
| 23:59.31 | benjk | robin_z, which OS |
| 23:59.33 | benjk | ? |
| 23:59.36 | benjk | or distro |
| 23:59.55 | robin_z | Linux 2.6.8-2 SMP (debain sarge witha backports kernel) |