irclog2html for #asterisk on 20061227

`00:05.08`	`riddlebox`	`robin_sz, I would like to take a look if you dont mind`
`00:05.49`	`robin_sz`	`ok, it needs access to "a bin" or alternatively "a hammer"`
`00:06.35`	`robin_sz`	`sbingner, yes, I have a 2102`
`00:07.34`	`robin_sz`	`riddlebox, in a word, the GXP2000 is the worst waste of electricity I have yet found. Turn it off, bin it. buy somehting that works.`
`00:07.59`	`*** join/#asterisk dmd1222 (n=dmd1222@c-24-20-35-49.hsd1.or.comcast.net)`
`00:09.19`	`robin_sz`	`sbingner, can I take a wild guess? you are trying to get a 2102 to connect to a * box on your local network, and it refuses to evne make contact?`
`00:09.22`	`riddlebox`	`that sucks to hear, I got this for a gift`
`00:10.12`	`robin_sz`	`well, maybe the later ones are better. the ones I had have been totally useless. crashing, GUI going off, hook switches dont work etc etc`
`00:10.53`	`robin_sz`	`one word, don't upgrade the firmware unless you are really REALLY certain`
`00:10.59`	`robin_sz`	`no, really.`
`00:11.08`	`robin_sz`	`there is NO downgrade path`
`00:11.13`	`robin_sz`	`no way back at all.`
`00:11.13`	`riddlebox`	`this one has been working fine for me so far, its only been like 3 days`
`00:11.21`	`robin_sz`	`oh thats pretty good.`
`00:12.09`	`robin_sz`	`maybe the later ones are better. mine failed to stay up for more than a few hours, displays blank after 10 minutes or so`
`00:12.37`	`*** join/#asterisk Dont_Hate_bia (n=te_lo_me@209.200.133.237)`
`00:13.11`	`riddlebox`	`the only complaint I have so far is that it took like 5 minutes for it to update the time after I rebooted it`
`00:13.30`	`robin_sz`	`if thats the only complaint, then you are doing VERY well`
`00:13.45`	`robin_sz`	`wanna swap?`
`00:14.54`	`riddlebox`	`haha NO`
`00:15.02`	`robin_sz`	`dang`
`00:15.16`	`riddlebox`	`I want to get the call-pickup working, that is one feature I really like`
`00:19.03`	`*** join/#asterisk RoyK (n=roy@217-175-222.100710.adsl.tele2.no)`
`00:24.21`	`dlynes_laptop`	`riddlebox: you mean directed call pickup, or group pickup?`
`00:25.06`	`riddlebox`	`dlynes_laptop, I would like to press like *5XX and pick up a ringing phone`
`00:25.07`	`*** join/#asterisk BSD_Tech (n=RNeese@ppp-69-238-216-111.dsl.irvnca.pacbell.net)`
`00:25.17`	`dlynes_laptop`	`riddlebox: where xx is hte extension?`
`00:25.23`	`riddlebox`	`yup`
`00:25.27`	`dlynes_laptop`	`riddlebox: that's called directed call pickup`
`00:25.42`	`dlynes_laptop`	`riddlebox: asterisk supports group pickup without any additional programming`
`00:25.58`	`dlynes_laptop`	`riddlebox: i don't think it supports directed call pickup without some custom scripts though`
`00:26.20`	`riddlebox`	`really, is group pickup just to pickup any ringing phone in a group?`
`00:26.31`	`dlynes_laptop`	`riddlebox: exactly`
`00:27.19`	`robin_sz`	`ooh, that sounds useful`
`00:27.25`	`riddlebox`	`that would be fine, I guess, I will search for group pickup then, do you have any ideas about the intercoming?`
`00:28.22`	`dlynes_laptop`	`riddlebox: you mean internal paging?`
`00:29.20`	`riddlebox`	`yeah, so I can dial say **5xx and that phone will go off hook automatically`
`00:29.27`	`dlynes_laptop`	`riddlebox: yeah...asterisk also supports that`
`00:29.35`	`dlynes_laptop`	`riddlebox: but you need to have a phone that supports that as well`
`00:29.43`	`dlynes_laptop`	`riddlebox: most phones do not support it`
`00:29.45`	`riddlebox`	`dlynes_laptop, the phone does`
`00:29.57`	`dlynes_laptop`	`riddlebox: Aastra I know supports it for sure...polycom might support it as well`
`00:30.19`	`dlynes_laptop`	`riddlebox: take a look on the wiki for the Aastra 480i`
`00:30.31`	`dlynes_laptop`	`riddlebox: you'll see instructions on how to set up internal paging for that phone`
`00:30.35`	`riddlebox`	`yeah I want one of those, but kinda expensive`
`00:30.45`	`dlynes_laptop`	`riddlebox: it'll be similar to what you're using, i'm guessing`
`00:31.06`	`riddlebox`	`the grandstream has a pdf file, but it doesnt seem to have worked`
`00:31.16`	`dlynes_laptop`	`riddlebox: well, what can I say?`
`00:31.20`	`dlynes_laptop`	`riddlebox: it's a grandstream`
`00:31.26`	`riddlebox`	`yeah`
`00:31.35`	`riddlebox`	`gxp2000`
`00:34.06`	`*** join/#asterisk RoyKa (n=roy@217-175-222.100710.adsl.tele2.no)`
`00:34.07`	`*** join/#asterisk [tasty]freeze (n=yamahabr@204-181-50-10.skybest.com)`
`00:34.16`	`dlynes_laptop`	`riddlebox: btw....you said too expensive?`
`00:34.28`	`dlynes_laptop`	`riddlebox: isn't the gxp2000 more expensive than the aastra 9133i?`
`00:34.32`	`riddlebox`	`$100 for a phone right`
`00:34.43`	`[tasty]freeze`	`hmmmm, anyone in here using the spa-3000 for a gateway?`
`00:34.49`	`[tasty]freeze`	`the gxp2000 is about 80 bux`
`00:34.53`	`dlynes_laptop`	`woah`
`00:34.55`	`[tasty]freeze`	`maybe less depending where you go`
`00:34.57`	`dlynes_laptop`	`didn't think it was that cheap`
`00:35.04`	`dlynes_laptop`	`figured it was around $180-200`
`00:35.09`	`[tasty]freeze`	`no way.`
`00:35.18`	`[tasty]freeze`	`i have one right next to me, its a pretty nice phone i think for the moeny`
`00:35.22`	`dlynes_laptop`	`does it suck as bad as the budgetones?`
`00:35.28`	`s34n`	`does somebody have experience with digium/sangoma/rhino analog telephony cards, and would recommend one over the other?`
`00:35.41`	`[tasty]freeze`	`voipsupply is selling it for 79 bux`
`00:35.49`	`[tasty]freeze`	`i dont know, i havent used a budgetone.`
`00:36.06`	`[tasty]freeze`	`my only real complaint are the buttons.... i wish they were harder plastic...`
`00:36.12`	`s34n`	`dlynes_laptop: the gxp-2000 has serious reliability issues`
`00:36.13`	`[tasty]freeze`	`but im picky... its a nice phone`
`00:36.28`	`dlynes_laptop`	`the sangomas are good, i'm not a good person to talk to about the digium's, and the rhinos are not terribly compatible when installed in the same machine as sangomas or digiums`
`00:36.28`	`[tasty]freeze`	`s34n what kind? i havent had any so far.`
`00:36.48`	`s34n`	`[tasty]freeze: needs to be rebooted at least once a day`
`00:36.58`	`dlynes_laptop`	`s34n: so it's got the input gain problem from the budgetone licked, but introduced more problems?`
`00:37.00`	`[tasty]freeze`	`i havent rebooted mine in a week.`
`00:37.23`	`s34n`	`[tasty]freeze: is that an endorsement?`
`00:37.30`	`[tasty]freeze`	`ummm..`
`00:37.35`	`[tasty]freeze`	`no?`
`00:37.40`	`[tasty]freeze`	`maybe im just lucky.`
`00:37.41`	`riddlebox`	`I havent had any problems with my phone yet`
`00:37.47`	`dlynes_laptop`	`having to reboot a phone after a week is not a good thing`
`00:37.59`	`[tasty]freeze`	`well i updated the config file.`
`00:38.00`	`dlynes_laptop`	`i get pissed when i have to do that to some phones after 2 or 3 weeks`
`00:38.51`	`s34n`	`I playes with the gxp-2000 for several months, and was left deeply dissatisfied`
`00:38.54`	`[tasty]freeze`	`i would imagine you would be able to setup a cron job to do it if you really needed to on the server.`
`00:39.00`	`[tasty]freeze`	`what do you suggest over it s34n`
`00:39.08`	`dlynes_laptop`	`you shouldn't have to reboot a phone, period`
`00:39.23`	`[tasty]freeze`	`okay, you win. i dont feel like i should defend it anyways.`
`00:39.26`	`s34n`	`[tasty]freeze: are you looking for budget or quality?`
`00:39.42`	`[tasty]freeze`	`well, a little bit of both, but i dont wanna spend a ton on these phones.`
`00:39.50`	`[tasty]freeze`	`somewhere maybe in the middle?`
`00:39.51`	`Strom_C`	`polycom ip430`
`00:39.56`	`Strom_C`	`budget AND quality!`
`00:40.01`	`[tasty]freeze`	`excellent.`
`00:40.03`	`s34n`	`polycoms are high quality`
`00:40.25`	`[tasty]freeze`	`can i send an auto answer thru sip-info? for something like intercom usage?`
`00:40.29`	`Strom_C`	`yes`
`00:40.33`	`[tasty]freeze`	`neato.`
`00:40.56`	`s34n`	`I haven't used the ip430, but it sounds like it is a good buy`
`00:41.13`	`s34n`	`~USD150`
`00:41.50`	`riddlebox`	`[tasty]freeze, gradnstream has a pdf file to show how to do it, if you get it to work let me know`
`00:41.59`	`riddlebox`	`I used this guide, http://grandstream.com/FAQ/FAQ_and_Example_for_Asterisk_Configuration_for_GXP-2000.pdf`
`00:42.12`	`[tasty]freeze`	`the remote reboot?`
`00:42.52`	`*** join/#asterisk bmd_ (n=bmd@72.54.252.34)`
`00:42.57`	`RoyKa`	`hi`
`00:43.07`	`[tasty]freeze`	`to be honest, i've installed sipx on a box, and i've been playing with it for a bit, i mentioned the auto reboot because i saw that it can do it when it makes new/updated config files for the phone`
`00:43.12`	`riddlebox`	`[tasty]freeze, no the intercom`
`00:43.23`	`[tasty]freeze`	`oh, yes i know, i've been using it.`
`00:43.29`	`[tasty]freeze`	`thank you though.`
`00:43.41`	`riddlebox`	`[tasty]freeze, how did you achieve it?`
`00:44.34`	`[tasty]freeze`	`well, i don't have my asterisk server installed right now, but i sent a sip-info header with ("auto-answer: 0") i believe.`
`00:44.37`	`[tasty]freeze`	`or something similar.`
`00:44.52`	`riddlebox`	`yeah the pdf says that`
`00:44.59`	`[tasty]freeze`	`and when you turn on the option on the phone to accept that parameter, it will automatically answer.`
`00:45.10`	`[tasty]freeze`	`not too hard.`
`00:45.27`	`[tasty]freeze`	`why? did you expect me to do something different riddlebox?`
`00:45.48`	`riddlebox`	`I was hoping, cause I cant get it to work`
`00:45.55`	`[tasty]freeze`	`really?`
`00:45.57`	`*** join/#asterisk te_lo_meto_mami (n=te_lo_me@209.200.133.237)`
`00:46.03`	`[tasty]freeze`	`did you enable the option on the phone?`
`00:46.07`	`riddlebox`	`yup`
`00:46.49`	`[tasty]freeze`	`auto-answer via call-info header?`
`00:48.17`	`riddlebox`	`[tasty]freeze, http://pastebin.ca/292916`
`00:48.18`	`*** join/#asterisk squish102 (n=tracy@cpe-024-074-100-250.carolina.res.rr.com)`
`00:52.03`	`[tasty]freeze`	`im not sure.`
`00:52.14`	`[tasty]freeze`	`i mean that looks alright to me`
`00:52.25`	`[tasty]freeze`	`but i am not an asterisk pro or anything.`
`00:53.28`	`riddlebox`	`everytime I think I am getting good, I find something that makes me realize I am not that good :p`
`00:54.07`	`[tasty]freeze`	`yeah, this isnt really something i spend a lot of time on, i've just started playing around with asterisk, and recently sipx...`
`00:54.23`	`[tasty]freeze`	`but i havent looked at config files for sipx, i just installed it, and have been using the web interface.`
`00:55.08`	`[tasty]freeze`	`but im not sure if i like it more than asterisk....... i really like the easy way to manage all the phones thru the web interface...`
`00:55.35`	`riddlebox`	`asterisk has a gui too now`
`00:55.54`	`[tasty]freeze`	`yeah, i was looking at the new whatever its called.....`
`00:56.39`	`[tasty]freeze`	`i wonder how hard it would be to write a plugin for it to manage phones thru it.... hmmmmm.`
`00:57.22`	`riddlebox`	`but most phones have a web gui already right`
`00:58.42`	`[tasty]freeze`	`yeah, but it would be nice if you had a lot of phones, same model, to be able to setup a basic config file layout thru the asterisk gui...`
`00:59.14`	`[tasty]freeze`	`maybe im just lazy... actually, i know i am. but i still think it would be an appealing feature.`
`01:00.46`	`[tasty]freeze`	`well, i think im going to watch a movie.... then possibly either go to bed, or come back here.... i suppose ill talk to you later.`
`01:03.03`	`*** join/#asterisk bkrus1 (n=kruz@24.96.146.217)`
`01:03.28`	`*** join/#asterisk hoobastooba (n=ckwall@c-71-195-199-149.hsd1.ut.comcast.net)`
`01:03.32`	`riddlebox`	`see ya`
`01:04.34`	`hoobastooba`	`can anyone tell me how to dial 911 from a Nufone connection? I am not able to find the info on their site, and when i dial just 911 from their site it does not work. I have a ticket in to them to answer that question, but I have been putting tickets in to them with no response since the 22nd of dec.`
`01:05.04`	`*** join/#asterisk bm1 (n=bmd@72.54.252.34)`
`01:05.08`	`bm1`	`hi bmd`
`01:05.15`	`bkrus1`	`:P`
`01:05.36`	`dlynes_laptop`	`hoobastooba: do they even support 911?`
`01:06.15`	`*** part/#asterisk bm1 (n=bmd@72.54.252.34)`
`01:06.20`	`pussfeller`	`doesnt the FCC make you support 911`
`01:06.21`	`hoobastooba`	`yeah, they have an e911`
`01:06.40`	`hoobastooba`	`i jsut cant find the info on how to dial it... simply dialing 911 out across their connection does not work.`
`01:06.42`	`dlynes_laptop`	`don't they just require you to have a 911 statement?`
`01:06.59`	`dlynes_laptop`	`i.e. say that you support it under these circumstances, or that you don't support it at all?`
`01:07.08`	`pussfeller`	`i thot the FCC came out right when VIOP was first taking off and forced it on the startups`
`01:07.13`	`hoobastooba`	`http://nufone.net/features/911/`
`01:07.29`	`pussfeller`	`(bought and paid for by $$$)`
`01:08.14`	`pussfeller`	`to transfer a call, im supposed to dial #, then the ext number?`
`01:08.36`	`dlynes_laptop`	`pussfeller: depends....are you doing it from an analog phone?`
`01:08.42`	`voidans`	`hi`
`01:08.52`	`pussfeller`	`yeah thru a sipura 2100`
`01:08.55`	`voidans`	`does anyone know if there will be a single span t1 card with the new dsp?`
`01:09.13`	`Qwell`	`voidans: what dsp?`
`01:09.34`	`voidans`	`the um te207 etc have a dsp chip for echo cancellation`
`01:09.47`	`Qwell`	`oh, dunno`
`01:11.19`	`*** part/#asterisk web-keeper-666 (n=web-keep@ppp101-191.static.internode.on.net)`
`01:12.23`	`dlynes_laptop`	`pussfeller: yeah...follow the instructions in the dial() app documentation, then`
`01:12.57`	`dlynes_laptop`	`pussfeller: and make sure you use the ,t and/or the ,T option to the dial command, depending on whether you want incoming transfers, outgoing transfers, or both`
`01:13.56`	`pussfeller`	`im pretty sure thats in there`
`01:14.09`	`pussfeller`	`i was thinking it had to do with the tones or something`
`01:15.24`	`*** join/#asterisk techie (n=techie@c-67-182-22-174.hsd1.ca.comcast.net)`
`01:15.49`	`pussfeller`	`dlynes_laptop: do i have to put them on hold first?`
`01:16.10`	`*** join/#asterisk heart (n=zippetto@lugbari/people/heart)`
`01:16.15`	`dlynes_laptop`	`pussfeller: no idea on that one, sorry`
`01:16.26`	`dlynes_laptop`	`pussfeller: never done any pbx features with asterisk using analog phones`
`01:16.50`	`dlynes_laptop`	`pussfeller: i just know the features are there`
`01:17.07`	`dlynes_laptop`	`cool`
`01:17.10`	`dlynes_laptop`	`new lucy liu movie`
`01:19.48`	`*** join/#asterisk coppice (n=chatzill@40.168.17.210.dyn.pacific.net.hk)`
`01:23.26`	`*** part/#asterisk techie (n=techie@c-67-182-22-174.hsd1.ca.comcast.net)`
`01:26.34`	`Sauron	`Hum, that's not useful.`
`01:26.44`	`Sauron	`I upgraded from 1.4.0-b2 to 1.4.0`
`01:26.53`	`Sauron	`And it won't bridge my sip call`
`01:26.56`	`Sauron	`grumble`
`01:27.37`	`xai`	`is there a dundi channel?`
`01:28.15`	`Sauron	`Hmm?`
`01:28.48`	`Sauron	`afaik, there's no dundi stuff going on`
`01:29.13`	`Sauron	`Unless I've missed out on something in the last year or so since I last had * working here`
`01:30.31`	`Sauron	`I call from my spa1k through * to my cell phone`
`01:30.33`	`Sauron	`cell rings`
`01:30.35`	`Sauron	`I answer`
`01:30.37`	`Sauron	`and silence`
`01:31.10`	`voidans`	`both ways?`
`01:31.22`	`Sauron	`yep`
`01:31.54`	`voidans`	`firewall on the machine?`
`01:32.14`	`voidans`	`between the sip provider`
`01:32.22`	`*** join/#asterisk ClydeGoffe (n=ClydeGof@ool-457d3e0d.dyn.optonline.net)`
`01:33.05`	`Sauron	`Hm, yes`
`01:33.14`	`Sauron	`But it shouldn't reinvite, etc`
`01:33.20`	`Sauron	`canreinvite=no`
`01:33.21`	`voidans`	`i mean`
`01:33.48`	`voidans`	`no sound is symptomatic of blocking rtp packets`
`01:33.52`	`voidans`	`can you take the firewall down to test?`
`01:34.09`	`Sauron	`Hmm`
`01:34.14`	`Sauron	`Also doing NAT`
`01:34.38`	`Sauron	`I doubt it'd connect the rtp stream to an rfc1918 address directly :)`
`01:35.02`	`voidans`	`the port range may have changed`
`01:35.06`	`voidans`	`what are you forwarding`
`01:35.33`	`Sauron	`umm, the point was to not forward anything`
`01:36.28`	`voidans`	`how would that work`
`01:36.29`	`Sauron	`spa1k -> * -> sip provider`
`01:36.49`	`voidans`	`but um`
`01:36.54`	`dlynes_laptop`	`Sauron: check dmesg...make sure your zaptel drivers have loaded fine
`01:37.05`	`voidans`	`he's not using zap?`
`01:37.09`	`Sauron	`Umm...`
`01:37.12`	`Sauron	`what he said`
`01:37.22`	`voidans`	`you still need to get RTP to asterisk`
`01:37.24`	`dlynes_laptop`	`Sauron: are you using ztdummy though?
`01:37.38`	`bkrus1`	`modprobe zaptel`
`01:37.42`	`*** join/#asterisk h0 (n=fakhir@unaffiliated/fakhir)`
`01:38.01`	`*** join/#asterisk arrenlex (n=em@S01060040052da362.ed.shawcable.net)`
`01:38.21`	`Sauron	`Hm, zaptel was loaded`
`01:38.59`	`arrenlex`	`I want to be able to use phone menus to run commands on my Linux box: Press 1 to change directory, press 2 to run firefox, press 3 to cat file... etc. Is that even possible? I asked on #ubuntu and they pointed me to asterisk and to ekiga softphone.`
`01:39.03`	`Sauron	`I did unload wcfxo, since I don't want to use the fxo card in the machine`
`01:39.20`	`dlynes_laptop`	`Sauron: yeah...that could be your problem right there, then
`01:39.27`	`Sauron	`How so?`
`01:39.30`	`dlynes_laptop`	`Sauron: asterisk will using a timing device if one is available
`01:39.40`	`dlynes_laptop`	`Sauron: even for mundane stuff like playback of audio
`01:39.47`	`Sauron	`It used to be you only needed ztdummy/zaptel if you did conferencing`
`01:39.58`	`dlynes_laptop`	`Sauron: note the difference between needed and optional
`01:40.19`	`dlynes_laptop`	`Sauron: i'm saying it'll use it _if_ it's available
`01:40.24`	`Sauron	`so if I'm not doing conferencing, I shouldn't need ztdummy`
`01:40.37`	`dlynes_laptop`	`Sauron: yeah, so unload all your zaptel crap
`01:40.42`	`dlynes_laptop`	`Sauron: and then restart asterisk
`01:40.52`	`dlynes_laptop`	`Sauron: and see if you still have the problem before trying to debug nat
`01:41.22`	`Sauron	`Hmm.`
`01:42.08`	`dlynes_laptop`	`Sauron: it's much easier to solve it at the zaptel end than trying to muck with nat, scratching your head 50 million times, only to find out the problem was zaptel, to begin with
`01:42.10`	`*** join/#asterisk zmef420 (n=zmef420@metarb3-pool4-182.mtco.com)`
`01:42.35`	`Sauron	`I still don't see how the zaptel stuff has anything to do with my sip audio not connecting`
`01:42.52`	`dlynes_laptop`	`Sauron: i never mentioned anything about audio not connecting
`01:43.11`	`dlynes_laptop`	`Sauron: but your audio will not play back if a zaptel driver is loaded into memory, but did not initialize properly
`01:43.25`	`bkruse`	`dlynes_laptop: correct, if whatever your doing requires some sort of timing :]`
`01:43.29`	`bkruse`	`modprobe ztdummy`
`01:43.29`	`bkruse`	`?`
`01:43.30`	`dlynes_laptop`	`Sauron: asterisk only checks to see if the driver loaded, not to see if it initialized properly
`01:43.48`	`dlynes_laptop`	`bkruse: like i said...asterisk uses a timing device optionally, if it's there`
`01:43.59`	`dlynes_laptop`	`bkruse: only conference and iax trunking require it`
`01:44.12`	`dlynes_laptop`	`bkruse: but playback, background, ... will all use a timing device if it's available`
`01:44.14`	`*** join/#asterisk DavoFrom818 (n=Vito310@cpe-76-173-56-41.socal.res.rr.com)`
`01:44.16`	`Sauron	`so forgive me for asking... What am I solving by doing all this again?`
`01:44.24`	`DavoFrom818`	`hi guys`
`01:44.26`	`*** join/#asterisk intralanman (n=lanman@pool-71-253-247-137.nrflva.east.verizon.net)`
`01:44.35`	`DavoFrom818`	`what do you guys think about asterisk for windows?`
`01:44.40`	`dlynes_laptop`	`Sauron: do you know for sure rtp is getting blocked?
`01:44.54`	`dlynes_laptop`	`Sauron: did you put an ethereal monitor on there?
`01:45.12`	`dlynes_laptop`	`Sauron: if not, the zaptel fix is the easiest fix, if it fixes your problem
`01:45.19`	`Sauron	`Okay`
`01:45.27`	`dlynes_laptop`	`Sauron: you have about a 20% chance of it fixing your problem
`01:45.32`	`Sauron	`1. It shouldn't be forwarding rtp traffic, since I have canreinvite=no everywhere`
`01:45.43`	`Sauron	`I don't want to forward rtp, I was * to be inline.`
`01:45.59`	`voidans`	`but`
`01:46.02`	`dlynes_laptop`	`Sauron: if you have nat=yes, qualify=yes, and canreinvite=no, the problem is probably in zaptel
`01:46.12`	`voidans`	`is asterisk outide the firewall`
`01:46.20`	`Sauron	`voidans: * is the firewall`
`01:46.22`	`sbingner`	`erg... I got a PAP2 but it's PAP2v2 --- I can unlock it, but are there any issues with it you guys know of?`
`01:46.26`	`voidans`	`it still needs to get rtp in`
`01:46.30`	`voidans`	`no?`
`01:46.40`	`Sauron	`correct`
`01:46.42`	`dlynes_laptop`	`Sauron: are you using iax to get out, or sip?
`01:46.47`	`*** join/#asterisk Dont_Hate_bia (n=te_lo_me@209.200.133.237)`
`01:46.51`	`Sauron	`I'm not filtering (much) traffic to/from the machine`
`01:46.56`	`Sauron	`only traffic "through" it`
`01:47.01`	`Sauron	`dlynes: sip`
`01:47.08`	`Sauron	`lemme restart * see how it behaves now`
`01:47.19`	`dlynes_laptop`	`Sauron: ok, all your zaptel drivers are unloaded now?
`01:47.23`	`Sauron	`yes`
`01:47.30`	`dlynes_laptop`	`Sauron: including zaptel.ko and ztdummy.ko?
`01:47.37`	`Sauron	`yes`
`01:47.44`	`dlynes_laptop`	`Sauron: ok, restart and try
`01:47.48`	`Sauron	`I unloaded wcfxo, ztdummy and zaptel`
`01:48.11`	`dlynes_laptop`	`Sauron: if it sitll doesn't work and you're sure all those zaptel drivers are unloaded, then it's definitely a nat issue
`01:48.49`	`dlynes_laptop`	`but i generally prefer to solve problems iwth the easiest fix possible, if it works`
`01:49.06`	`Sauron	`Hum`
`01:49.11`	`dlynes_laptop`	`?`
`01:49.15`	`*** part/#asterisk fran (n=fran@190.48.193.87)`
`01:49.16`	`Sauron	`I have audio from cell -> * -> spa1k`
`01:49.27`	`Sauron	`no audio from spa1k -> * -> cell`
`01:49.55`	`dlynes_laptop`	`what did you have before?`
`01:50.00`	`Sauron	`no audio either way`
`01:50.04`	`Sauron	`So it's halfway there :)`
`01:50.08`	`voidans`	`do you have filtering outbound`
`01:50.28`	`Sauron	`No`
`01:50.32`	`dlynes_laptop`	`Sauron: now do you believe me about zaptel being used for timing if it's available?
`01:50.34`	`voidans`	`no input filters to the local net`
`01:50.46`	`voidans`	`from the local interface ;)`
`01:50.49`	`Sauron	`dlynes: I always knew zap was used for timing if available`
`01:50.52`	`Sauron	`I never argued that`
`01:51.07`	`dlynes_laptop`	`ah...maybe it was everyone else that was arguing that then`
`01:51.07`	`Sauron	`voidans: None`
`01:51.18`	`voidans`	`id ont think anyone argued with you`
`01:51.20`	`voidans`	`;)`
`01:51.34`	`Sauron	`<PROTECTED>`
`01:51.34`	`Sauron	`<PROTECTED>`
`01:51.35`	`Sauron	`<PROTECTED>`
`01:52.43`	`Sauron	`Hm, nope`
`01:52.54`	`Sauron	`still no outbound audio`
`01:53.27`	`Sauron	`and now I can't reproduce the other problem I was having`
`01:54.44`	`Sauron	`If I call from my cell through my sip provider to *, I used to get an error about unable to create sip channel for INVITE`
`01:55.36`	`*** join/#asterisk HTSUser2536 (n=aao_pwne@c-24-21-116-29.hsd1.wa.comcast.net)`
`01:55.56`	`Sauron	13:15 <`Sauron> [Dec 26 13:14:48] NOTICE[16267]: chan_sip.c:13178 handle_request_invite: Unable to create/find SIP channel for this INVITE
`01:56.13`	`Sauron	`But after upgrading from 1.4.0b2 to 1.4.0, I don't get the error`
`01:56.18`	`Sauron	`which makes it hard to troubleshoot`
`01:56.28`	`Sauron	`dlynes, any suggestions? :)`
`01:56.33`	`*** join/#asterisk mistral (n=mistral@jstevenson.plus.com)`
`01:56.35`	`Qwell`	`sounds like somebody fixed a problem to me`
`01:56.44`	`Qwell`	`when in doubt - upgrade`
`01:57.08`	`Sauron	`Qwell: So how come I still don't get connected? :)`
`01:57.19`	`Qwell`	`wasn't paying attention`
`01:57.35`	`Sauron	`look back 15 lines of scrollback`
`01:58.32`	`voidans`	`see if you are dropping packets`
`01:58.36`	`voidans`	`iptables -L -v`
`01:58.40`	`*** join/#asterisk teknoprep (n=tekon@unaffiliated/teknoprep)`
`02:00.14`	`Sauron	`hm`
`02:01.41`	`Sauron	`I see sip packets on the outside`
`02:01.43`	`Sauron	`and on the inside`
`02:04.05`	`*** part/#asterisk arrenlex (n=em@S01060040052da362.ed.shawcable.net)`
`02:05.20`	`dlynes_laptop`	`Sauron: sounds to me like you might have a sip peer that's not registered, or not listening
`02:06.10`	`Sauron	`Hm.`
`02:06.17`	`Sauron	`How can I check if I'm registered?`
`02:06.25`	`voidans`	`sip show registry`
`02:06.49`	`Sauron	`State Registered`
`02:06.58`	`*** join/#asterisk kyo (n=kio@ool-4577ae5e.dyn.optonline.net)`
`02:07.46`	`Sauron	`Man I've been trying to remember that command since last night`
`02:07.49`	`dlynes_laptop`	`nmap -sU -p 5060 ip.address.of.phone`
`02:08.25`	`Sauron	`PORT STATE SERVICE`
`02:08.25`	`Sauron	`5060/udp open unknown`
`02:12.05`	`voidans`	`do um`
`02:12.47`	`voidans`	`wow`
`02:12.57`	`*** join/#asterisk gniretar (n=gniretar@24-247-81-221.dhcp.bycy.mi.charter.com)`
`02:13.00`	`gniretar`	`hi all`
`02:13.07`	`gniretar`	`is there a voip-info page on call logging with Asterisk?`
`02:13.10`	`gniretar`	`i cant find it......`
`02:13.24`	`voidans`	`search for CDR`
`02:14.05`	`Sauron	`Hmm`
`02:14.10`	`Sauron	`what's the hangup command from *?`
`02:14.11`	`gniretar`	`not CDR`
`02:14.16`	`gniretar`	`actual recording of the call itself`
`02:14.19`	`gniretar`	`the voice`
`02:14.22`	`voidans`	`iptables -A INPUT -i external_iface -p udp -s SIP_PROVIDER -j ACCEPT`
`02:14.33`	`voidans`	`just so i can stop thinking its rtp`
`02:14.38`	`Strom_C`	`gniretar: use the mixmonitor command`
`02:14.49`	`gniretar`	`OK`
`02:14.50`	`gniretar`	`thanks`
`02:15.24`	`Sauron	`hmm, heh`
`02:15.44`	`voidans`	`then, theres some crap in the chhangelog about rtp`
`02:18.04`	`*** join/#asterisk stkn_ (i=nobody@gentoo/developer/pdpc.active.stkn)`
`02:21.26`	`*** join/#asterisk TCobur (i=UPP@c-66-30-204-187.hsd1.ma.comcast.net)`
`02:21.52`	`*** join/#asterisk linagee (n=linagee@ip68-8-184-71.sd.sd.cox.net)`
`02:22.26`	`voidans`	`workign?`
`02:22.31`	`Sauron	`hang on`
`02:22.49`	`Sauron	`so you did see the part where I said I was seeing SIP traffic when I tcpdumped both eth0 and eth1, right? :)`
`02:24.48`	`voidans`	`yeah`
`02:24.49`	`voidans`	`but`
`02:24.52`	`voidans`	`rtp isnt sip`
`02:24.58`	`Sauron	`well`
`02:25.14`	`Sauron	`rtp traffic`
`02:25.17`	`voidans`	`rtp streams on high ports, defined in rtp.conf`
`02:25.20`	`voidans`	`oic ;)`
`02:25.27`	`Sauron	`I saw streams of packets from phone -> * box`
`02:25.29`	`Sauron	`and back`
`02:25.31`	`voidans`	`so not 5060? :)`
`02:25.41`	`Sauron	`and from * box <-> sip provider`
`02:28.05`	`*** join/#asterisk ManxPowe1 (n=manxpowe@dpc67142183150.direcpc.com)`
`02:28.05`	`Sauron	`ort 11480 <-> 38680`
`02:28.09`	`Sauron	`*por`
`02:28.10`	`Sauron	`t`
`02:28.11`	`Sauron	`blah`
`02:28.14`	`Sauron	`high enough for you? :)`
`02:28.17`	`voidans`	`yep`
`02:28.18`	`voidans`	`;)`
`02:29.04`	`Sauron	`I was trying to find the FWD echo number so I can verify the rest works`
`02:29.31`	`*** join/#asterisk DaveCanoe (n=Dave@canoe404.dclg.ca)`
`02:29.42`	`Sauron	`613`
`02:29.43`	`Sauron	`Mmm`
`02:30.33`	`*** join/#asterisk RoyK (n=roy@217-175-222.100710.adsl.tele2.no)`
`02:31.04`	`*** join/#asterisk Dont_Hate_bia (n=te_lo_me@209.200.133.237)`
`02:31.12`	`*** join/#asterisk astawerksdotnet (n=doug@cpe-75-179-164-7.woh.res.rr.com)`
`02:32.14`	`*** join/#asterisk zmef420 (n=zmef420@metarb3-pool4-182.mtco.com)`
`02:32.32`	`*** join/#asterisk luke-jr\|work (n=luke-jr@fl-71-53-155-1.dhcp.embarqhsd.net)`
`02:36.55`	`*** join/#asterisk _cleric_ (n=dacleric@p54823E38.dip0.t-ipconnect.de)`
`02:38.13`	`*** join/#asterisk viator (n=laptop2@pool-71-161-156-197.spfdma.east.verizon.net)`
`02:38.30`	`*** join/#asterisk naereb (n=naereb@blk-89-245-103.eastlink.ca)`
`02:38.31`	`viator`	`hello`
`02:39.12`	`viator`	`what benefits does an asterisk system have over a traditional system such as the avaya partner system`
`02:39.29`	`Strom_C`	`a hell of a lot cheaper to maintain and operate`
`02:39.35`	`Strom_C`	`and much more flexible`
`02:39.42`	`viator`	`we already have a partner system`
`02:39.53`	`viator`	`i mean would there be a cost savings`
`02:39.59`	`Strom_C`	`how much does the maintenance cost you annually?`
`02:40.16`	`viator`	`maintainance lol`
`02:40.25`	`*** join/#asterisk NghtLght (n=ircproxy@202.179.3.171)`
`02:40.32`	`viator`	`neve have a problem with it`
`02:40.50`	`[TK]D-Fender`	`viator : How much does it cost to add a remote soft-phone user to your Avaya system?`
`02:40.57`	`viator`	`me and another guy fix most things ourselves`
`02:40.58`	`Strom_C`	`yeah, but you /do/ pay a vendor for a maintenance contract, right?`
`02:41.18`	`viator`	`i do have any soft-phones`
`02:41.22`	`viator`	`dont*`
`02:41.29`	`[TK]D-Fender`	`viator : By that token, how much does it cost to add 100 VM boxes?`
`02:41.31`	`*** join/#asterisk casedog (i=4436d5f7@gateway/web/cgi-irc/ircatwork.com/x-47a98ac880874c65)`
`02:41.39`	`[TK]D-Fender`	`viator : How about call queing?`
`02:41.41`	`viator`	`yeah we did but i dont recall what it is anually`
`02:42.15`	`viator`	`we only have about 10 lines and about 20 workstations`
`02:42.16`	`casedog`	`looking for some asterisknow help`
`02:42.37`	`casedog`	`or trixbox even`
`02:42.55`	`[TK]D-Fender`	`casedog : Please read the channel topic.`
`02:43.23`	`viator`	`could i maintin it myself easily`
`02:43.24`	`viator`	`?`
`02:43.32`	`[TK]D-Fender`	`viator : Depends on YOU.`
`02:43.39`	`casedog`	`sorry new to IRC as well`
`02:43.52`	`viator`	`im not afraid of the cli and i run linux at home`
`02:44.25`	`casedog`	`\disconnect`
`02:44.29`	`viator`	`but i dont know c`
`02:44.32`	`*** part/#asterisk casedog (i=4436d5f7@gateway/web/cgi-irc/ircatwork.com/x-47a98ac880874c65)`
`02:44.34`	`viator`	`heh`
`02:45.13`	`*** join/#asterisk xheliox (n=jeff@pdpc/supporter/active/xheliox)`
`02:46.07`	`Sauron	`Oh my`
`02:46.08`	`Sauron	`sigh`
`02:46.15`	`*** join/#asterisk reggy7c (n=reggy7c@210.11.97.131)`
`02:46.17`	`Sauron	`Just did lots of dialplan fixes`
`02:46.19`	`Sauron	`and didn't save`
`02:46.20`	`Sauron	`blech`
`02:46.20`	`thegreatmaco`	`\help`
`02:46.52`	`[TK]D-Fender`	`viator : Neither do I.`
`02:48.10`	`*** join/#asterisk posixisposi (n=andy@user-0c93jo3.cable.mindspring.com)`
`02:48.15`	`viator`	`i mean by using voip would i save money over our regular connection`
`02:49.04`	`viator`	`im sorry i dont know the proper terminology`
`02:49.32`	`viator`	`maybe its pots? and that connects to our partner system`
`02:49.52`	`[TK]D-Fender`	`viator : Please note that * by definition does not imply VoIP....`
`02:50.07`	`viator`	`i understand that`
`02:50.13`	`[TK]D-Fender`	`viator : You have all sorts of choices about what kind of phones & lines you want.`
`02:50.25`	`*** join/#asterisk bkruse (n=kruz@69.73.127.92)`
`02:51.10`	`viator`	`i understand and i know ip phones are expensive compared to traditional phones`
`02:51.44`	`Sauron	`hum`
`02:51.46`	`Sauron	`odd`
`02:53.31`	`viator`	`we will be moving to a new location hopefully soon im just looking at options`
`02:54.01`	`astawerksdotnet`	`actually compared to lets say Inter-tel phones for example some voip phones are less expensive`
`02:54.20`	`Sauron	`how odd`
`02:54.50`	`Sauron	`Dude, that's weird.`
`02:55.07`	`Sauron	`voidans`
`02:55.10`	`viator`	`the building has no ethernet cabling and only minimal phone system so we will either move this partner system there`
`02:55.22`	`viator`	`or buy somthing new`
`02:55.37`	`Supaplex`	`that should get you started ;)`
`02:55.39`	`viator`	`heheh`
`02:55.58`	`De_Mon`	`supaplex?`
`02:56.24`	`viator`	`well they are CHEAP so ill be running it all`
`02:56.25`	`Supaplex`	`yez?`
`02:56.41`	`De_Mon`	`you just brought back some fond memories of dos`
`02:56.50`	`astawerksdotnet`	`how any floors is the building ?`
`02:56.55`	`astawerksdotnet`	`many floors`
`02:56.56`	`Supaplex`	`I do that from time to time :)`
`02:57.06`	`viator`	`2 floors`
`02:57.14`	`viator`	`but its a huge steel building`
`02:57.25`	`viator`	`alot of the first floor is garage space`
`02:57.26`	`astawerksdotnet`	`no dry wall anywhere?`
`02:57.28`	`Supaplex`	`no, there are 111 floors in my building. :-D right De_Mon?`
`02:57.48`	`viator`	`theres drywall but not alot`
`02:57.55`	`De_Mon`	`hehehe`
`02:58.02`	`viator`	`we are a transportation business`
`02:58.05`	`astawerksdotnet`	`just wire ethernet it will be a good investment for the future`
`02:58.07`	`viator`	`we have taxis limos`
`02:58.09`	`Sauron	`dlynes_laptop: around?`
`02:58.15`	`viator`	`lincoln town cars`
`02:58.22`	`viator`	`cabulances`
`02:58.28`	`astawerksdotnet`	`no hummer limos?`
`02:58.30`	`Qwell`	`cabulances?`
`02:58.33`	`Qwell`	`wtf is that`
`02:58.48`	`dlynes_laptop`	`Sauron: sorta...busy eating...why?
`02:58.51`	`astawerksdotnet`	`ghostbusters ambulance`
`02:58.53`	`viator`	`yes its a van with a hydrauliclift`
`02:58.57`	`Qwell`	`oh`
`02:59.02`	`viator`	`for trnasportinc wheelchairs`
`02:59.09`	`Strom_C`	`Qwell: a cross between an ambulance and a taxi`
`02:59.12`	`viator`	`transporting*`
`02:59.25`	`Supaplex`	`c = cheap? as in cheap ambulance :P`
`02:59.29`	`Supaplex`	`yea, taxi hehe`
`02:59.32`	`Sauron	`dlynes: It got really bizarre`
`02:59.50`	`Sauron	`dlynes: calling from spa1k through * through sipprovider to cellphone`
`02:59.55`	`viator`	`we have a few haulers`
`02:59.57`	`Sauron	`If I answer cell phone, no outbound sound`
`03:00.00`	`viator`	`a realty company`
`03:00.03`	`Sauron	`if I screen call and let go to voicemail`
`03:00.08`	`Sauron	`I can leave a message just fine`
`03:00.17`	`Sauron	`then check it on cellphone and there it is`
`03:00.33`	`dlynes_laptop`	`Sauron: have you tried calling hte cellphone from a regular phone?
`03:00.34`	`viator`	`auto repiar/service`
`03:00.47`	`Sauron	`dlynes: Don't have one handy`
`03:01.06`	`dlynes_laptop`	`Sauron: sounds like it's your cellphone or your cellphone provider
`03:01.39`	`Sauron	`how odd`
`03:02.32`	`Sauron	`so i'm going to assume that the outbound sip stuff works`
`03:02.32`	`Sauron	`and focus on why the inbound call doesn't go through`
`03:02.32`	`Sauron	`how fun`
`03:03.14`	`*** join/#asterisk ClydeGoffe (n=ClydeGof@ool-457d3e0d.dyn.optonline.net)`
`03:03.52`	`Sauron	`and I think I'll go watch a movie at 9:45`
`03:03.57`	`Sauron	`or mebbe not, we'll see`
`03:07.05`	`*** part/#asterisk astawerksdotnet (n=doug@cpe-75-179-164-7.woh.res.rr.com)`
`03:07.05`	`*** join/#asterisk astawerksdotnet (n=doug@cpe-75-179-164-7.woh.res.rr.com)`
`03:09.47`	`*** part/#asterisk andresmujica (n=andresmu@190.24.226.206)`
`03:10.25`	`*** join/#asterisk dahunter3 (n=dahunter@pool-71-110-65-182.lsanca.dsl-w.verizon.net)`
`03:11.30`	`*** join/#asterisk BSDTech (n=RNeese@ppp-69-238-216-111.dsl.irvnca.pacbell.net)`
`03:13.27`	`*** join/#asterisk NghtLght (n=ircproxy@202.179.3.171)`
`03:13.52`	`*** join/#asterisk sahafeez (n=sahafeez@ip68-6-223-92.sd.sd.cox.net)`
`03:15.50`	`*** join/#asterisk RoyK (n=roy@217-175-222.100710.adsl.tele2.no)`
`03:22.19`	`*** join/#asterisk Eigh (n=Miranda@69.63.224.132)`
`03:25.07`	`*** part/#asterisk naereb (n=naereb@blk-89-245-103.eastlink.ca)`
`03:25.12`	`*** join/#asterisk DEader (n=mes@ool-44c6a5c2.dyn.optonline.net)`
`03:26.16`	`DEader`	`if i have a agi script writen in pascal what should i save the extension has`
`03:26.23`	`bkruse`	`:X`
`03:26.33`	`DEader`	`should it still be script.agi`
`03:26.53`	`bkruse`	`yes!`
`03:27.03`	`bkruse`	`i believe so`
`03:27.05`	`Sauron	`Hum`
`03:27.07`	`bkruse`	`DEader: does it not work?`
`03:27.13`	`Sauron	`how come a dialplan reload doesn't take effect?`
`03:27.29`	`Sauron	`hm, nvm`
`03:27.31`	`Sauron	`grumble`
`03:27.43`	`DEader`	`it doesn't work if i save has agi`
`03:27.46`	`DEader`	`or .pas`
`03:29.11`	`DEader`	`?`
`03:29.15`	`Sauron	`What's the replacement for DigitTimeout ?`
`03:29.24`	`Sauron	`ah`
`03:30.02`	`Sauron	`Set(TIMEOUT(digit)=4)`
`03:30.16`	`DEader`	`any one knows about agi`
`03:30.18`	`DEader`	`script`
`03:32.34`	`*** part/#asterisk ClydeGoffe (n=ClydeGof@ool-457d3e0d.dyn.optonline.net)`
`03:32.51`	`Supaplex`	`exten => 1000,7,eagi(somethingcool.agi\|Hello World...)`
`03:33.10`	`Supaplex`	`DEader: ^^^ look. or, read the wiki.`
`03:33.21`	`DEader`	`i red wiki`
`03:33.27`	`bkruse`	`~agi`
`03:33.33`	`jbot`	`agi is probably the Asterisk Gateway Interface... similar to CGI for web applications AGI lets you script call control and access databases using your favorite language. AGI wrappers are available for Python (pyst), Perl (astperl?) and other languages`
`03:33.33`	`bkruse`	`:[`
`03:33.33`	`bkruse`	`:P`
`03:33.36`	`bkruse`	`yay`
`03:33.39`	`bkruse`	`~wiki`
`03:33.53`	`DEader`	`didn't tell me what to save agi script with pascal code with what extensions`
`03:34.14`	`danp`	`it doesn't really matter what extension you save it with`
`03:34.14`	`DEader`	`i know all that already`
`03:34.26`	`danp`	`as long as it's in the agi-bin directory and it's executable`
`03:34.27`	`DEader`	`i know pascal`
`03:34.29`	`Supaplex`	`DEader: it has to be executable.`
`03:34.37`	`DEader`	`it is`
`03:34.52`	`DEader`	`but i keep getting an error saying wrong file format`
`03:34.57`	`Sauron	`Is there a zap version requirement for * 1.4?`
`03:35.01`	`Supaplex`	`and you have to obey the AGI communication protocol.`
`03:35.12`	`Supaplex`	`DEader: on what platform?`
`03:35.20`	`DEader`	`i know about the commucation proto`
`03:35.25`	`DEader`	`on linux`
`03:35.28`	`DEader`	`fedora 5`
`03:35.34`	`Supaplex`	`does it run directly?`
`03:35.46`	`Supaplex`	`eg, from the shell`
`03:35.49`	`DEader`	`i have an agi script that works fine with perl`
`03:36.01`	`DEader`	`but it doens't work with pascal`
`03:36.02`	`Supaplex`	`then that's perl, not pascal.`
`03:36.13`	`Supaplex`	`ok, let's worry about the broken one :)`
`03:36.16`	`bkruse`	`Sauron: how so?
`03:36.28`	`Sauron	`I'm wondering`
`03:36.30`	`DEader`	`i have a agi script with perl code`
`03:36.30`	`bkruse`	`im pretty sure you can use any zap with any asterisk`
`03:36.34`	`bkruse`	`dont quote me though`
`03:36.36`	`Sauron	`cuz I'm likely not runing the latest zap version`
`03:36.37`	`DEader`	`that one works ok`
`03:36.48`	`DEader`	`but the one with pascal codes doesn't work`
`03:36.50`	`Supaplex`	`does the compiled agi you wrote in pascal run from the command line?`
`03:37.28`	`Sauron	`Hm, it compiled * w/o zap support`
`03:37.33`	`Sauron	`How annoying :0`
`03:37.38`	`DEader`	`no`
`03:37.49`	`Supaplex`	`DEader: fix that first.`
`03:38.05`	`dlynes_laptop`	`Sauron: load chan_zap.so
`03:38.12`	`DEader`	`its just a regular pascal script that send out the out put to the command line`
`03:38.20`	`Sauron	`Hum, yeah. I prolly unloaded that`
`03:38.39`	`DEader`	`that the script is not being recognize has pascal`
`03:38.41`	`DEader`	`code`
`03:38.45`	`dlynes_laptop`	`Supaplex: i think it's already zapped`
`03:38.58`	`bkruse`	`no pun intended`
`03:38.59`	`bkruse`	`LO`
`03:38.59`	`dlynes_laptop`	`Supaplex: and htat's why he's having issues`
`03:39.00`	`bkruse`	`:P`
`03:39.15`	`Supaplex`	`I think he zapped DEader hehe.`
`03:40.13`	`Sauron	`dlynes: Nope. Dang, it didn't install them`
`03:40.14`	`Sauron	`grumble`
`03:40.31`	`DEader`	`huh?`
`03:40.44`	`Supaplex`	`DEader: that's nice. we (I) have netier the time nor the know how nor the patience to troubleshoot your pascal issue. stick with perl :)`
`03:41.07`	`Sauron	`mordor:/tmp # ls /usr/lib/asterisk/modules/chan_zap.so`
`03:41.08`	`Sauron	`/bin/ls: /usr/lib/asterisk/modules/chan_zap.so: No such file or directory`
`03:41.11`	`*** join/#asterisk n3xg3n (n=n3xg3n@ip70-174-160-19.dc.dc.cox.net)`
`03:41.19`	`DEader`	`i can do advance stuff in pascal`
`03:41.34`	`DEader`	`:{`
`03:41.37`	`*** part/#asterisk n3xg3n (n=n3xg3n@ip70-174-160-19.dc.dc.cox.net)`
`03:41.59`	`DEader`	`if i get this to work i could let asterisk to do any thing`
`03:42.23`	`Sauron	`why are you using pascal anyway?`
`03:42.28`	`Sauron	`It's somewhat.. outdated`
`03:42.31`	`*** join/#asterisk Aster (n=eric@205.211.239.11)`
`03:42.34`	`Supaplex`	`pascal is still alive?`
`03:42.56`	`DEader`	`its a programing language spin of to delphi for pc`
`03:43.03`	`DEader`	`and kylix for linux`
`03:43.18`	`Supaplex`	`I thought delphi was a spinoff of pascal`
`03:43.21`	`DEader`	`can write servers or software for linux in pascal`
`03:43.34`	`DEader`	`thats what i said`
`03:43.34`	`DEader`	`lol`
`03:43.48`	`Supaplex`	`ah ok :)`
`03:45.39`	`Supaplex`	`am I that cute?`
`03:46.06`	`[TK]D-Fender`	`Supaplex : unload chan_delusional.so`
`03:47.13`	`Sauron	`dum di dum`
`03:47.18`	`Supaplex`	`fenlander: that's great advice, it'll prevent people from jumping to conclusions :)`
`03:47.50`	`Sauron	`apparently that's why it didn't compile w/zap`
`03:48.02`	`Supaplex`	`so much for the keyboard interrupts :P`
`03:48.06`	`Supaplex`	`s/the/my/`
`03:48.52`	`Sauron	`there's a wcusb driver?`
`03:49.26`	`Sauron	`wow, buncha new zaptel stuffs`
`03:50.11`	`dlynes_laptop`	`wcusb isn't new`
`03:50.30`	`dlynes_laptop`	`i think it was even there in 1.0`
`03:51.22`	`*** join/#asterisk reggy7c (n=reggy7c@210.11.97.131)`
`03:52.04`	`*** join/#asterisk NghtLght (n=ircproxy@202.179.3.171)`
`03:52.39`	`*** join/#asterisk bmg505 (n=leon@c1-112-16.rndf.isadsl.co.za)`
`03:53.16`	`Sauron	`you know what ztd-eth and ztd-loc are for?`
`03:54.06`	`dlynes_laptop`	`timing over an ethernet hookup`
`03:57.38`	`Sauron	`how fun, get to rebuild asterisk`
`03:58.18`	`Supaplex`	`apt-get install ... uh nm. :)`
`03:59.55`	`Sauron	`oh shush`
`04:01.35`	`Sauron	`hum`
`04:01.35`	`Sauron	`so are people moving toward ael, and away from extensions.conf?`
`04:01.46`	`dlynes_laptop`	`if you mean more than one person, yeah, i think so`
`04:02.28`	`Sauron	`they should have a script to read extensions.conf and print extensions.ael :)`
`04:06.03`	`*** join/#asterisk grexk (n=lumiland@124.107.88.153)`
`04:09.22`	`*** join/#asterisk bmd_ (n=bmd@72.54.252.34)`
`04:09.28`	`Sean-`	`Anyone here use Asterlink before?`
`04:10.56`	`[TK]D-Fender`	`dlynes_laptop : OMG, they've DOUBLED!?`
`04:11.55`	`dlynes_laptop`	`[TK]D-Fender: ?`
`04:12.12`	`dlynes_laptop`	`[TK]D-Fender: oh...the number of people using AEL/AEL2 :0`
`04:12.27`	`Sean-`	`dlynes wusup :)`
`04:13.05`	`dlynes_laptop`	`hey`
`04:14.38`	`Sean-`	`have a good christmas and boxing day :P?`
`04:14.59`	`dlynes_laptop`	`yep`
`04:15.41`	`dlynes_laptop`	`almost finished all the spoils, too`
`04:16.48`	`Sean-`	`hehe :)`
`04:17.09`	`dlynes_laptop`	`i think i'm going to be ten pounds heavier in January`
`04:18.10`	`*** part/#asterisk bkruse (n=kruz@69.73.127.92)`
`04:24.16`	`Ez`	`i need a good voip provider allow me to choose name and # output ; give me one plz`
`04:26.38`	`converx`	`anyones knows of a wav gsm converter for windows?`
`04:27.44`	`DEader`	`there is one for linux`
`04:27.56`	`DEader`	`that convert wav to gsm format for asterisk`
`04:28.15`	`DEader`	`ez you voxee`
`04:28.21`	`DEader`	`they let u said caller id`
`04:28.48`	`converx`	`for winxp`
`04:29.39`	`*** join/#asterisk NghtLght (n=ircproxy@202.179.3.171)`
`04:29.45`	`*** join/#asterisk EyeCue (n=eyecue@unaffiliated/eyecue)`
`04:31.12`	`Sauron	`hum`
`04:31.14`	`Sauron	`how odd`
`04:32.44`	`*** join/#asterisk tydelNL (i=tydel@durka.net-addicts.net)`
`04:38.51`	`*** join/#asterisk L\|NUX (n=linux@unaffiliated/lnux/x-10290)`
`04:39.09`	`Ez`	`k`
`04:40.53`	`*** join/#asterisk Mad_guy (n=austin@ip68-1-213-212.dl.dl.cox.net)`
`04:46.02`	`*** join/#asterisk h1 (n=fakhir@ool-44c69d58.dyn.optonline.net)`
`04:48.34`	`*** join/#asterisk irq (n=dan@wsip-70-167-112-5.sd.sd.cox.net)`
`04:49.18`	`*** join/#asterisk sahafeez (n=sahafeez@ip68-6-223-92.sd.sd.cox.net)`
`04:53.44`	`*** join/#asterisk SECGOD (i=SECGOD@c-71-57-36-106.hsd1.il.comcast.net)`
`04:54.27`	`*** join/#asterisk CunningPike (n=CunningP@S010600095b33697f.vc.shawcable.net)`
`05:00.57`	`*** join/#asterisk NghtLght (n=ircproxy@202.179.3.171)`
`05:03.38`	`*** join/#asterisk mistral (n=mistral@jstevenson.plus.com)`
`05:04.17`	`*** join/#asterisk zepmantra (i=dsadsads@125.212.110.115)`
`05:06.11`	`*** join/#asterisk BSDTech (n=RNeese@ppp-69-238-216-111.dsl.irvnca.pacbell.net)`
`05:10.16`	`*** join/#asterisk infernix (i=nix@spirit.infernix.net)`
`05:12.33`	`Sauron	`Hm`
`05:12.38`	`Sauron	`why would wait(1) fail in extensions.conf?`
`05:13.02`	`*** join/#asterisk web-keeper-666 (n=web-keep@ppp101-191.static.internode.on.net)`
`05:13.32`	`*** join/#asterisk squish102 (n=squish10@cpe-024-074-100-250.carolina.res.rr.com)`
`05:13.52`	`web-keeper-666`	`Hi gang can anyone tell what the differences are between AsteriskNOW as opposed to just Asterisk..?`
`05:14.12`	`Sauron	`packaging?`
`05:14.13`	`Sauron	`I dunno.`
`05:14.47`	`*** join/#asterisk BitBandit (n=polx@24-241-129-98.static.stgr.ut.charter.com)`
`05:15.41`	`CunningPike`	`Sauron: Either a syntax error, or app_wait() isn't loaded
`05:15.57`	`Sauron	`Hum`
`05:16.00`	`Sauron	`There's an app_wait?`
`05:16.04`	`Sauron	`Oh my`
`05:16.31`	`web-keeper-666`	`I was just trying to compare the two.!, but I can't find any info. Any suggestions..?`
`05:16.40`	`Sauron	`hmm`
`05:16.45`	`Sauron	`It shows in core show applications`
`05:17.10`	`CunningPike`	`Sauron: What does the CLI say when you call it?
`05:17.38`	`Sauron	`Just do wait(1) from the cli?`
`05:17.45`	`DEader`	`is there a way to setup some thing like * 69 call back on asterisk`
`05:18.08`	`CunningPike`	`Sauron: How are you calling it now?
`05:19.02`	`*** join/#asterisk EyeCue (n=eyecue@unaffiliated/eyecue)`
`05:19.27`	`[TK]D-Fender`	`web-keeper-666 : AsteriskNOW is a full distro CD including the new GUI interface`
`05:19.42`	`Sauron	`Well, in extensions.conf, it's exten => main,5,Wait(1)`
`05:20.09`	`CunningPike`	`Sauron: So, what message do you get in the CLI when it fails?
`05:21.04`	`Sauron	`-- Executing [main@residentmenu:5] Wait("SIP/...-081c7f30", "1") in new stack`
`05:21.23`	`Sauron	`== Spawn extension (residentmenu, main, 5) exited non-zero on 'SIP/...-081c7f30'`
`05:21.49`	`Sauron	`then it goes to h,1... etc`
`05:21.51`	`CunningPike`	`Sauron: Where is it failing?
`05:21.57`	`Sauron	`Umm`
`05:22.01`	`Sauron	`That's all I get on the console`
`05:22.03`	`CunningPike`	`Sauron: Looks good to me.....
`05:22.04`	`Sauron	`So you tell me.`
`05:22.15`	`Sauron	`exited non-zero is generally bad`
`05:22.16`	`CunningPike`	`Sauron: What did you expect? Christmas lights?
`05:22.26`	`Sauron	`Sigh.`
`05:22.28`	`CunningPike`	`Sauron: Exited non-zero is the norm
`05:22.44`	`Sauron	`Huh.`
`05:22.57`	`CunningPike`	`Sauron: In fact, I don't think I have ever seen 'exited zero'
`05:23.44`	`Sauron	`Nevermind, you're starting to not pass my BS filter.`
`05:23.53`	`Sauron	`I'll wait for someone who doesn't talk about christmas lights.`
`05:24.05`	`CunningPike`	`Sauron: Suit yourself
`05:24.13`	`CunningPike`	`[TK]D-Fender: Tell him`
`05:24.31`	`dlynes_laptop`	`Sauron: CunningPike actually does know what he's talking about
`05:24.33`	`Sauron	`The reason you haven't seen exited zero, is because it doesn't give a message on a clean exit`
`05:24.53`	`[TK]D-Fender`	`Sauron : Pastebin your dialplan please.
`05:24.54`	`CunningPike`	`Sauron: If I wanted to pull this many teeth, I'd have been a dentist
`05:25.11`	`[TK]D-Fender`	`CunningPike : a 2x4 is far more effective...`
`05:25.21`	`CunningPike`	`:)`
`05:25.32`	`[TK]D-Fender`	`CunningPike : Or at least effecient :D`
`05:25.40`	`CunningPike`	`More fun, too :)`
`05:25.49`	`CunningPike`	`Makes a mess of the carpet, though`
`05:25.57`	`CunningPike`	`Off to sack the trash - biab`
`05:26.11`	`Sauron	`exten => main,4,Answer()`
`05:26.11`	`Sauron	`exten => main,5,Wait(1)`
`05:26.11`	`Sauron	`exten => main,6,Background(moo1)`
`05:26.15`	`[TK]D-Fender`	`CunningPike : Remember Lethal Weapon 3? pleas stand over there on the plastic please...`
`05:26.27`	`*** join/#asterisk TechCentric- (n=will@c-71-194-70-13.hsd1.il.comcast.net)`
`05:27.08`	`[TK]D-Fender`	`Sauron I'm suspecting your dialplan isn't in effect. do a reload and try again
`05:27.48`	`Sauron	`I just started mordorCLI> dialplan show residentmenu`
`05:27.50`	`Sauron	`Erk`
`05:27.51`	`Sauron	`mordor*CLI> dialplan show residentmenu`
`05:27.59`	`Sauron	`...`
`05:28.00`	`Sauron	`<PROTECTED>`
`05:28.00`	`Sauron	`<PROTECTED>`
`05:28.00`	`Sauron	`<PROTECTED>`
`05:28.38`	`[TK]D-Fender`	`Sauron : pastebin please.
`05:28.49`	`[TK]D-Fender`	`Sauron : and better than that please
`05:29.07`	`Sauron	`Well, you tell me how much you want, and I'll give you`
`05:35.45`	`Sauron	`.. or not.`
`05:38.58`	`[TK]D-Fender`	`Sauron : Pastebin your actual dialplan context in its entirety
`05:47.10`	`Sauron	`http://pastebin.ca/293108`
`05:47.10`	`Sauron	`Done`
`05:47.10`	`EyeCue`	`jees i gotta rebuild this box asap`
`05:47.10`	`EyeCue`	`we got a changes for 1.4 up on a url somewhere?`
`05:47.10`	`dlynes_laptop`	`EyeCue: how about the changelog from the same place you got the 1.4 tarball?`
`05:47.10`	`EyeCue`	`how about id prefer not to download the tarball first :)`
`05:47.10`	`EyeCue`	`im in research/curious mode`
`05:47.10`	`dlynes_laptop`	`EyeCue: you don't have to`
`05:47.10`	`EyeCue`	`roger that`
`05:47.10`	`EyeCue`	`brb`
`05:47.10`	`dlynes_laptop`	`EyeCue: you can download the changelog separately`
`05:47.10`	`EyeCue`	`o_O`
`05:47.11`	`EyeCue`	`ponders if theres a summary`
`05:47.11`	`dlynes_laptop`	`try checking on the website, or on the news posting to voip-info.org`
`05:47.11`	`*** join/#asterisk penghb (n=nnnnnnpe@202.108.130.138)`
`05:47.42`	`*** join/#asterisk Techie-Micheal (n=Techie-M@phpbb/support/techie-micheal)`
`05:48.04`	`Sauron	`Fender: Any news from the pastebin link I posted?`
`05:49.10`	`Techie-Micheal`	`I have asterisk 1.4, and have it running (rather easy actually), but now I'm trying to make a config change to the macro-stdexten so that users calling get the lovely ringing they expect. I'm using users.conf to set users up, so I'm a little confused as to how to setup extensions.conf. Be gentle, I set this up only a few hours ago. :P`
`05:52.27`	`*** join/#asterisk ToyMan (n=Stuart@user-12lcqia.cable.mindspring.com)`
`05:52.54`	`[TK]D-Fender`	`Sauron : Ok... well you can't make an IVR off an exten tother than "s". thats your problem
`05:53.32`	`[TK]D-Fender`	`Sauron : the parser is seeing all those fruitless Backgrounds and jsut jumping to the point... the inevitable disconnect
`05:53.40`	`[TK]D-Fender`	`Sauron : Time to reread THE BOOK
`05:54.33`	`[TK]D-Fender`	`Techie-Micheal : ....`
`05:54.34`	`[TK]D-Fender`	`~book`
`05:54.36`	`jbot`	`hmm... book is a book called Asterisk: The Future of Telephony which is found at http://www.asteriskdocs.org/modules/tinycontent/index.php?id=11`
`05:54.41`	`[TK]D-Fender`	`~wikis`
`05:54.42`	`jbot`	`[wikis] http://www.voip-info.org`
`05:55.00`	`Techie-Micheal`	`[TK]D-Fender: hm?`
`05:55.37`	`Sauron	`Hmm.`
`05:55.44`	`Sauron	`It worked with 1.2 :)`
`05:55.58`	`[TK]D-Fender`	`Techie-Micheal : I jsut had jbot link you to the book you should be reading.`
`05:56.18`	`[TK]D-Fender`	`Sauron : No it didn't..... these rules have been the same since day 1.
`05:56.34`	`[TK]D-Fender`	`Sauron : And I've corrected people who've done it for years
`05:56.50`	`Techie-Micheal`	`I have enough books on asterisk in front of me, it'd be nice if I got a real response instead of an improper ellipsis. ;)`
`05:57.29`	`Sauron	`Fender: then how come it worked for > 12 months before I did the 1.4 upgrade?`
`05:58.10`	`[TK]D-Fender`	`Techie-Micheal : if you ask a specific question, you might get a specific answer. Telling us you are confused with how to set up extension.conf tells us you don't know the basics...`
`05:58.44`	`[TK]D-Fender`	`Sauron : No reason it should ahve, and I doubt you had that sub-menu exten called that then.
`05:58.57`	`Sauron	`Sadly, I did.`
`05:59.15`	`Sauron	`And I even called it from my cellphone on several occations`
`05:59.30`	`Sauron	`hm.`
`05:59.46`	`Sauron	`Actually, maybe not.`
`05:59.54`	`Sauron	`which begs the question.. why is it going there now`
`06:00.03`	`Techie-Micheal`	`As I said above, I have a working configuration. All I'm trying to do, as I said, is get the extension to ring before it gets answered at the receiver. I said all of this already. I also said that all I'm trying to do is setup the macro in extensions.conf so that this happens. I can use the old 1.2 way of setting up extensions, but since I already said I'm instead using 1.4's users.conf, I'm wanti`
`06:00.11`	`Sauron	`Hm, nope. yeah.`
`06:00.12`	`Techie-Micheal`	`ng to know how to make this happen, as I have already explained.`
`06:01.09`	`[TK]D-Fender`	`Techie-Micheal : Hrm... ok, not familiar with users.conf.....`
`06:01.27`	`[TK]D-Fender`	`Techie-Micheal : AFAIK extensions.conf works the exact same way..`
`06:01.35`	`*** join/#asterisk bkw_ (n=brian@ppp-70-128-100-224.dsl.tulsok.swbell.net)`
`06:03.21`	`Techie-Micheal`	`[TK]D-Fender: Here's the modification to the macro that I tried:`
`06:03.22`	`Techie-Micheal`	`exten => s,1,Dial(${ARG2},20) ; Ring the interface, 20 seconds maximum`
`06:03.22`	`Techie-Micheal`	`exten => s,2,Ringing ; Make them comfortable`
`06:03.22`	`Techie-Micheal`	`exten => s,3,Wait,2`
`06:03.42`	`Techie-Micheal`	`Only change I made was adding priorities 2 and 3, the Dial is the same as is what's below it.`
`06:04.03`	`*** join/#asterisk santoshr (i=1063@203.199.110.93)`
`06:04.13`	`[TK]D-Fender`	`Techie-Micheal : And what is it doin (or not) that you don't like?`
`06:04.34`	`Techie-Micheal`	`Without it, there's no ringing, there's silence, then the endpoint answers.`
`06:04.41`	`santoshr`	`is there a way to make asterisk communicate with the gsm phone over a serial cable or something.i have the device on /dev/ttyUSB0 ?`
`06:04.45`	`Techie-Micheal`	`Well, that's what I want to fix. :P`
`06:04.57`	`Sauron	`Fender: But you can do that with extension s?`
`06:05.08`	`[TK]D-Fender`	`Techie-Micheal : Well I'd have to see what it is that calls that macro, and what else happens...`
`06:05.20`	`Sauron	`Hmm.. apparently not.`
`06:05.22`	`Sauron	`blech`
`06:05.34`	`[TK]D-Fender`	`Sauron : huh?
`06:05.46`	`CunningPike`	`Techie-Micheal: Well, you could use the 'r' option to Dial(), but that's merely masking, rather than fixing, the problem. You should get ringing from the device you are dialing`
`06:05.52`	`Sauron	`s/main/s/g on extensions.conf`
`06:06.01`	`Sauron	`and I get the same problem`
`06:06.04`	`CunningPike`	`Techie-Micheal: What is ${ARG2} set to?`
`06:06.20`	`[TK]D-Fender`	`Sauron : pastebin your new attempt at an IVR. All of it
`06:06.22`	`Sauron	23:52 <[TK]D-Fender> `Sauron : Ok... well you can't make an IVR off an exten tother than "s". thats your problem
`06:06.26`	`Techie-Micheal`	`CunningPike: ${ARG2} - Device(s) to ring`
`06:06.47`	`Sauron	`It's not an "attempt at an IVR"`
`06:06.53`	`Techie-Micheal`	`I haven't changed much, except adding those two lines, so I'm still working my way around the config.`
`06:06.53`	`Sauron	`It's "getting an old IVR to work again`
`06:06.56`	`Sauron	`eyeroll`
`06:07.02`	`ManxPower`	`WHAT!!!!`
`06:07.06`	`Sauron	`But your wish will be my command`
`06:07.13`	`ManxPower`	`Of course you can make an IVR off any extension`
`06:07.39`	`CunningPike`	`Techie-Micheal: And the value of ${ARG2} when you actually call Dial() is what?`
`06:07.45`	`Sauron	`Manx: then can you look at my pastebin and tell me why It's doing what it's doing?`
`06:07.47`	`Techie-Micheal`	`Sauron: Good luck, I tried an IVR earlier and it didn't work at all.
`06:07.49`	`ManxPower`	`Calls coming in on analog lines only hit extension "s" (and that is almost the ONLY time a call gets sent to extension "s")`
`06:07.57`	`[TK]D-Fender`	`Sauron : Strangely I didn't mean that in a negative sense....
`06:08.00`	`Sauron	`ManxPower: http://pastebin.ca/293108`
`06:08.14`	`Techie-Micheal`	`CunningPike: It may be me being tired, but I'm not sure I understand what you are asking there. :/`
`06:08.15`	`santoshr`	`app_sms uses the pstn lines which have sms support. is there a way i can intereact over the serial device and send AT commands`
`06:08.18`	`Sauron	`Fender: Fair enough.`
`06:09.16`	`CunningPike`	`Techie-Micheal: I need to know the value of ${ARG2} in order to provide some insight as to how to proceed`
`06:09.24`	`ManxPower`	`Sauron: you need a WaitExten at the end
`06:09.33`	`Sauron	`Hmm.`
`06:09.43`	`Techie-Micheal`	`CunningPike: Okay, to use the extension I'm trying to get to work, 1000.`
`06:09.48`	`[TK]D-Fender`	`ManxPower : Thats a bad app......`
`06:09.54`	`[TK]D-Fender`	`ManxPower : fugly.`
`06:10.03`	`[TK]D-Fender`	`ManxPower : And totally unescessary.`
`06:10.06`	`ManxPower`	`Older verisons of Asterisk defaulted to waiting for an extension when it falls off the end of the priority list and background has been run`
`06:10.08`	`CunningPike`	`Techie-Micheal: So, SIP/1000, then?`
`06:10.14`	`Sauron	`Aha`
`06:10.15`	`Techie-Micheal`	`CunningPike: Yees`
`06:10.22`	`Sauron	`So that's why it used to work and then stopped`
`06:10.31`	`CunningPike`	`Techie-Micheal: OK - and what device is at the other end?`
`06:10.39`	`[TK]D-Fender`	`Sauron : ManxPower probably has a point if you call this off your surrect setup...
`06:10.52`	`[TK]D-Fender`	`Sauron : I never think to use this method.
`06:11.12`	`ManxPower`	`Sauron: what version of Asterisk?
`06:11.16`	`Techie-Micheal`	`Currently myself. I'll stick up a "real" one later today.`
`06:11.32`	`Sauron	`Manx: Now, it's 1.4.0`
`06:11.39`	`santoshr`	`I want to use the gsm device connected with the help of a serial Usb cable to send and recieve sms ...`
`06:11.43`	`Sauron	`Used to be some old CVS HEAD from 2003-ish`
`06:11.44`	`Techie-Micheal`	`So now I'm trying to call from 1000 to 1000`
`06:11.49`	`ManxPower`	`Sauron: I'll bet that in 1.4 the default is to hangup when you run out of priorities
`06:11.58`	`ManxPower`	`look at UPGRADE.txt in the Asterisk source directory`
`06:12.02`	`Sauron	`So the second part of the puzzle`
`06:12.03`	`CunningPike`	`Techie-Micheal: What type of phone?`
`06:12.09`	`Sauron	`Why isn't it playing the backgrounds`
`06:12.16`	`Techie-Micheal`	`Xlite`
`06:12.21`	`ManxPower`	`Sauron: It's not playing the backgrounds??
`06:12.24`	`Sauron	`Nope`
`06:12.29`	`Sauron	`Look at the bottom of my pastebin`
`06:12.31`	`ManxPower`	`Well you need to get that fixed first.`
`06:12.34`	`Sauron	`psated the console log`
`06:12.40`	`Sauron	`http://pastebin.ca/293108`
`06:12.41`	`[TK]D-Fender`	`Sauron : if you had the WaitExten at the end it might well have played them, but you can't "run out" on anything other than "s" and act like an IVR.
`06:13.07`	`Sauron	`Manx claims otherwise and I know he's smart`
`06:13.08`	`Sauron	`:p`
`06:13.40`	`[TK]D-Fender`	`Sauron : And we both mentioned ending that exte with "WaitExten" which you have not done
`06:13.43`	`CunningPike`	`Techie-Micheal: Well, XLite isn't indicating that it's ringing, most likely - what shows in the CLI when you try it?`
`06:13.48`	`[TK]D-Fender`	`Sauron : pay attention :)
`06:13.52`	`Sauron	`I'm working on it restarting`
`06:13.58`	`ManxPower`	`Sauron: Weird.
`06:14.05`	`Techie-Micheal`	`CunningPike: I can tell you in a sec.`
`06:14.10`	`Sauron	`Umm, you didn't mention it until after Manx did, Fender :p`
`06:14.16`	`Sauron	`so get off your high horse :)`
`06:14.39`	`ManxPower`	`Sauron: make sure you have this in /etc/asterisk/logging.conf under [logfiles]
`06:14.41`	`ManxPower`	`console => verbose,notice,warning,error`
`06:14.50`	`[TK]D-Fender`	`Sauron : yeah... but I payed attention and got it right away :)
`06:14.50`	`ManxPower`	`then do a "logger reload" in the CLI and try another call.`
`06:15.02`	`ManxPower`	`I'll bet you are missing out on some logging info`
`06:15.06`	`Sauron	`And yeah... still hangs up`
`06:15.08`	`Sauron	`blech`
`06:15.09`	`Techie-Micheal`	`Hrm. That's new. :P RIght now it is saying no route to host. Oh wait.`
`06:15.26`	`ManxPower`	`Sauron: [TK]D-Fender usually knows what he's talking about.
`06:16.00`	`Sauron	`Manx: So can y'all duke it out on the "can't run IVR off anything but s" issue?`
`06:16.05`	`Sauron	`So I can get a final say on it.`
`06:16.21`	`ManxPower`	`Whoever said that was wrong.`
`06:16.43`	`[TK]D-Fender`	`Sauron : And ManxPower usually know everything I think I don't need to know :)
`06:17.14`	`ManxPower`	`Sauron: but read UPGRADE.txt. This might be a 1.4 change. I doubt it, but you never know.
`06:17.19`	`*** join/#asterisk d42 (n=don@CPE-124-189-33-60.nsw.bigpond.net.au)`
`06:17.52`	`Sauron	`Well, I added WaitExten`
`06:17.55`	`Sauron	`And still no bueno`
`06:18.15`	`ManxPower`	`Sauron: until you fix the background thing,, I doubt waitexten will help
`06:18.22`	`ManxPower`	`did you update /etc/asterisk/logging.conf ?`
`06:18.27`	`Sauron	`I did`
`06:18.44`	`Sauron	`logger.conf you mean?`
`06:18.46`	`Sauron	`Hrm.`
`06:19.08`	`ManxPower`	`yes, logger.conf`
`06:19.11`	`[TK]D-Fender`	`ManxPower : Does waitexten cause Background's to play?`
`06:19.20`	`ManxPower`	`[TK]D-Fender: no.`
`06:19.28`	`[TK]D-Fender`	`ManxPower : then there's the problem`
`06:19.43`	`ManxPower`	`IT just means that if asterisk would normally hangup because it runs out of priorities then it will wait instead`
`06:20.05`	`[TK]D-Fender`	`ManxPower : I'm now guessing that the only way to use Backgroun is to use "s" to run your IVR and let it run its course the old-fashioned way`
`06:20.10`	`ManxPower`	`Sauron: What happens if you replace the Set timeout stuff with Noops ?
`06:20.24`	`ManxPower`	`[TK]D-Fender: I use background all over the place without problems.`
`06:20.40`	`[TK]D-Fender`	`ManxPower : Hrm`
`06:20.49`	`Sauron	`http://pastebin.ca/293125`
`06:20.55`	`Sauron	`The updates y'all told me to do`
`06:20.57`	`ManxPower`	`Sauron: did the change to logger.conf make any difference on the CLI output of a call?
`06:21.06`	`Sauron	`It did not`
`06:21.15`	`Sauron	`the log in that paste is from after the logger.conf change`
`06:21.43`	`ManxPower`	`Sauron: and you did "logger reload" right?
`06:21.48`	`Sauron	`Yes`
`06:21.57`	`*** join/#asterisk hfb (n=hfb@adsl-75-4-22-136.dsl.irvnca.sbcglobal.net)`
`06:22.01`	`Sauron	`Hm`
`06:22.07`	`Sauron	`are application names case sensitive?`
`06:22.23`	`ManxPower`	`Sauron: they are not supposed to be
`06:22.26`	`Sauron	`hm.`
`06:22.36`	`Sauron	`I notice it's now called BackGround instead of Background`
`06:22.37`	`Techie-Micheal`	`Hrm. I've managed to break something, because now it no longer works. I'll figure it out and return later. Oh joy! ;)`
`06:22.45`	`[TK]D-Fender`	`Sauron : Something fishy is going on in there....
`06:22.46`	`ManxPower`	`Damn it's cold here.`
`06:22.52`	`Sauron	`then again, the description says "Background .... "`
`06:22.53`	`Sauron	`Hehn`
`06:23.02`	`CunningPike`	`Techie-Micheal: OK - good luck :)`
`06:23.42`	`[TK]D-Fender`	`Sauron : add some filler. Make it wait for 3, then PLAYBACK a file, then Wait(3) again.
`06:23.53`	`[TK]D-Fender`	`Sauron : before letting it continue...
`06:24.46`	`[TK]D-Fender`	`Sauron : I want to see if something else relating to being answered isn't at fault....
`06:27.02`	`Sauron	`hum, weird`
`06:27.02`	`d42`	`When calling in with IAX2, The Rx-Frame has CALLED NUMBER : s - Is this Ok? Or is this a problem at my VOIP service provider? After some more frames, I send a Frame stating "No such context/extension" CAUSE CODE : 3`
`06:27.18`	`Sauron	`I did answer, wait(3), playback`
`06:27.21`	`Sauron	`it never played back`
`06:27.46`	`[TK]D-Fender`	`Sauron : did the wait 3 even technically take 3 seconds?
`06:27.55`	`[TK]D-Fender`	`Sauron : if you're not sure, extend it to 5-10
`06:28.37`	`CunningPike`	`d42: Do you have an 's' extension?`
`06:28.37`	`d42`	`CunningPike, No.`
`06:28.50`	`ManxPower`	`d42: the provider is NOT sending you the destination number`
`06:29.15`	`Sauron	`okay, wait(9)`
`06:29.19`	`d42`	`ManxPower, Is this something I should talk with the service provider?`
`06:29.33`	`Sauron	`hm, yeah no`
`06:29.40`	`ManxPower`	`d42: Your provider is the only person that can help you with this problem`
`06:29.51`	`[TK]D-Fender`	`Sauron : It dies in the middle?
`06:29.53`	`Sauron	`Fender: No dice. It just runs right past the wait statements`
`06:29.59`	`d42`	`ManxPower, thanks.`
`06:30.17`	`ManxPower`	`AHA!!!!!`
`06:30.19`	`[TK]D-Fender`	`Sauron : like, do you count off the seconds while watching,a nd does the call survive that long?
`06:30.37`	`Techie-Micheal`	`Hrm. Now I know what the problem is, just not why ...`
`06:30.46`	`CunningPike`	`Techie-Micheal: Shoot`
`06:30.46`	`Sauron	`It doesn't`
`06:31.02`	`Sauron	`As in, I tried to count off the seconds, but then my cell beeped at me cuz the call ended`
`06:31.07`	`ManxPower`	`Sauron: do you have [general] section followed by [globals] section even if they are empty? (at the beginning of extensions.conf)
`06:31.26`	`Sauron	`I do`
`06:31.43`	`Techie-Micheal`	`CunningPike: For some reason, I'm getting a 401 when trying to register. I've made sure the passwords are correct and all, where it was working and I haven't touched that part, it stopped.`
`06:31.43`	`[TK]D-Fender`	`ManxPower : Consider this new evidence....`
`06:31.48`	`Sauron	`And they're not empty`
`06:31.52`	`ManxPower`	`Sauron: are the first sections and do the lines start on collumn 1
`06:32.00`	`ManxPower`	`the == they`
`06:32.00`	`Sauron	`YEs and yes`
`06:32.11`	`Sauron	`[general] followed by [global]`
`06:32.19`	`Sauron	`err`
`06:32.21`	`Sauron	`[globals]`
`06:32.52`	`[TK]D-Fender`	`ManxPower : His call dies int he MIDDLE of a wait. this isn't jsut auto-fallthrough.`
`06:33.08`	`[TK]D-Fender`	`Sauron : which you should ahve made sue to set to "no"
`06:33.11`	`[TK]D-Fender`	`sure`
`06:33.25`	`Sauron	`Fender: what should've been set to no?`
`06:33.38`	`ManxPower`	`[TK]D-Fender: nod Which is why I asked him to remove the Set Timeout stuff just to be sure`
`06:33.42`	`[TK]D-Fender`	ok, well I've got to get to bed. `Sauron I'm leaving you in very capable hands and wish you the best of luck resolving the last of this
`06:33.58`	`[TK]D-Fender`	`Sauron : autofallthrough=no
`06:34.13`	`Sauron	`Hm.`
`06:34.15`	`[TK]D-Fender`	`night all`
`06:34.19`	`Sauron	`Yet another > 2003 option.`
`06:34.21`	`Sauron	`Grumble`
`06:34.52`	`ManxPower`	`none of this adresses the issue of it not executing the backgrounds and not throwing an error`
`06:35.07`	`CunningPike`	`Techie-Micheal: Maybe pastebin your sip.conf`
`06:35.08`	`CunningPike`	`~pb`
`06:35.18`	`jbot`	`pb is, like, a place to paste your stuff without flooding the channel - try http://pastebin.ca, or http://channels.debian.net/paste`
`06:35.18`	`Techie-Micheal`	`okie.`
`06:35.27`	`Techie-Micheal`	`If pastebin isn't really slow right now. :P`
`06:35.29`	`Sauron	`Manx: I'll update the pastebin, 'sec`
`06:36.06`	`CunningPike`	`Techie-Micheal: pastebin.ca usually works. pastebin.com is fubar`
`06:36.31`	`Techie-Micheal`	`Wait, I think I just found the problem. If this doesn't work, I'll pastebin it.`
`06:38.49`	`Techie-Micheal`	`Well, that fixed the registration problem, but not the no route problem ... grrr. Well, it is almost 2AM. Thanks for the help, I'll no doubt be back later.`
`06:38.59`	`Sauron	`Manx: http://pastebin.ca/293137`
`06:39.14`	`Sauron	`It never waits 9 seconds for the Wait(9), FWIW`
`06:40.54`	`ManxPower`	`pastebin your [general] section`
`06:41.20`	`Sauron	`You don't need the zap stuff loaded for playback/background, right?`
`06:41.30`	`ManxPower`	`Sauron: no you do not need Zap for this
`06:41.59`	`*** join/#asterisk Rishi_ (n=chatzill@c-67-180-199-154.hsd1.ca.comcast.net)`
`06:42.16`	`Sauron	`http://pastebin.ca/293139`
`06:42.53`	`*** join/#asterisk shinux__ (n=shinux@196.220.25.104)`
`06:43.36`	`ManxPower`	`Sauron: I've seen similar issues before. They were always caused by some oddball (usually not printable) character near the beginning of the dialplan. I would rename your extensions.conf to something else and try a VERY simple dialplan with IVR.
`06:43.43`	`ManxPower`	`IF that works you have a starting point.`
`06:43.48`	`ManxPower`	`But I need to get to bed soon.`
`06:43.53`	`Sauron	`Hm.`
`06:45.21`	`ManxPower`	`Sauron: You have [general] BEFORE [globals] in extensions.conf, right?
`06:45.26`	`Sauron	`yes`
`06:47.53`	`Sauron	`Hehn`
`06:47.58`	`Sauron	`Oh so simple dialplan :)`
`06:48.43`	`Sauron	`grumble`
`06:50.20`	`*** join/#asterisk shinux__ (n=shinux@196.220.25.104)`
`06:51.22`	`Sauron	`Do I need a default context, if the call comes in on a diff. context?`
`06:53.58`	`*** join/#asterisk posixisposi (n=andy@user-0c93jo3.cable.mindspring.com)`
`06:54.04`	`Sauron	`huh?`
`06:54.06`	`Sauron	`sigh.`
`06:54.13`	`Sauron	`I'm done, going home.`
`06:54.18`	`Sauron	`this is getting really annoying`
`06:54.26`	`Sauron	`Manx: I have a brand new extensions.conf`
`06:54.43`	`Sauron	`and * is returning a 404 not found to the sip provider`
`06:54.46`	`Sauron	`grumble`
`06:54.52`	`Sauron	`good night`
`06:55.33`	`hoobastooba`	`quick question.... with iax2, using the register => I would not see anything on the "iax2 show registry" I should not see anytihng, correct? the registrations would show up on the server being registered to. Am i thinking correct?`
`06:56.30`	`ManxPower`	`iax2 show peers is what you are looking for`
`06:56.52`	`Sauron	`hehn`
`06:57.05`	`hoobastooba`	`so if my peers show a connected status, I am successfully registerd, correct?`
`06:57.07`	`Sauron	`so I needed _X.,1`
`06:57.10`	`Sauron	`instead of s,1`
`06:57.25`	`ManxPower`	`Sauron: for now.
`06:58.08`	`Sauron	`I'll pastebin the stuff now`
`06:58.11`	`Sauron	`blech`
`06:59.04`	`Sauron	`Hehn`
`06:59.11`	`Sauron	`pastebin.ca was nice and fast on my mac`
`06:59.18`	`Sauron	`and sucky slow ass on my linux box`
`06:59.40`	`Sauron	`~pb`
`06:59.44`	`jbot`	`somebody said pb was a place to paste your stuff without flooding the channel - try http://pastebin.ca, or http://channels.debian.net/paste`
`07:00.39`	`*** join/#asterisk NghtLght (n=ircproxy@202.179.3.171)`
`07:01.08`	`hoobastooba`	`the reason I ask is because nufone is telling me I am blocking my incoming calls.`
`07:01.20`	`hoobastooba`	`but using iax2 debug i do not see anything at all coming in.`
`07:01.27`	`*** join/#asterisk linlin (n=will@c-71-194-70-13.hsd1.il.comcast.net)`
`07:02.18`	`CunningPike`	`hoobastooba: Peers are outgoing calls, users are incoming`
`07:02.24`	`Sauron	`Manx: http://pastebin.ca/293151`
`07:02.33`	`Sauron	`Doesn't get much simpler than that, hehn`
`07:04.32`	`hoobastooba`	`But it would be safe to assume that if iax2 debug shows absolutely nothing when dialing in that they are not sending me anything, right?`
`07:05.04`	`CunningPike`	`hoobastooba: Absent a firewall or routing problems, maybe :)`
`07:07.08`	`Sauron	`Guess he went to bed, finally`
`07:07.21`	`hoobastooba`	`with iax i only need to have the one port open, right?`
`07:07.46`	`hoobastooba`	`4569`
`07:07.52`	`hoobastooba`	`i have that routed to my server.`
`07:07.52`	`CunningPike`	`hoobastooba: Yes - 4569`
`07:08.15`	`hoobastooba`	`hmmm.`
`07:08.28`	`hoobastooba`	`udp only, right?`
`07:08.38`	`CunningPike`	`hoobastooba: I would try a wireshark trace`
`07:09.43`	`CunningPike`	`hoobastooba: Care to pm me the IP address of your server?`
`07:09.49`	`hoobastooba`	`sure...`
`07:09.52`	`*** join/#asterisk sahafeez (n=sahafeez@ip68-6-223-92.sd.sd.cox.net)`
`07:09.55`	`CunningPike`	`I'll try to register and you should see a failed attempt`
`07:16.35`	`sbingner`	`argh I can't really find any info good or bad on pap2 v2 ... trying to figure out if I should go back and get the PAP2 v1 instead of this v2`
`07:17.46`	`dlynes_laptop`	`does the version you have work?`
`07:20.06`	`*** join/#asterisk mtaht4 (n=m@c-71-198-23-124.hsd1.ca.comcast.net)`
`07:21.21`	`*** join/#asterisk Strom_M (n=strom@netblock-66-159-243-60.dslextreme.com)`
`07:22.07`	`*** join/#asterisk CrashHD (i=CrashHD@c-67-182-167-222.hsd1.ca.comcast.net)`
`07:24.55`	`*** part/#asterisk santoshr (i=1063@203.199.110.93)`
`07:29.14`	`*** join/#asterisk kamuix (i=kamuix@50.71.209.88.dsl.libello.mc)`
`07:32.35`	`hoobastooba`	`CunningPike: Just a quick question... The nufone tutorial for the outbound connection says to use [NuFone] type=peer and for the inbound connection to use [NuFone] type=user. Can I have two [NuFone]'s?`
`07:32.49`	`hoobastooba`	`I thought that was what type=friend was for`
`07:33.05`	`*** join/#asterisk santoshr (i=1063@203.199.110.93)`
`07:34.20`	`santoshr`	`is it possible for me to use the app_sms to send sms via a GSm phone connected via serial usb cable`
`07:34.25`	`*** join/#asterisk TonyM (n=TonyM@softins.claranet.co.uk)`
`07:35.43`	`*** join/#asterisk intralanman (n=lanman@pool-71-253-247-137.nrflva.east.verizon.net)`
`07:35.45`	`*** join/#asterisk bdheeman (i=bsd@59.144.250.8)`
`07:43.10`	`*** join/#asterisk L\|NUX (n=linux@unaffiliated/lnux/x-10290)`
`07:49.48`	`*** join/#asterisk frogzoo (n=frogzoo@202.155.165.25)`
`07:51.11`	`bdheeman`	`hi, friends!`
`07:53.34`	`*** join/#asterisk LaDy[uQ] (n=Baby19_@85.108.151.187)`
`07:55.17`	`tzafrir`	`santoshr, no`
`07:56.32`	`*** join/#asterisk m0x (n=dsa@201-220-110-65.bk9-dsl.surnet.cl)`
`07:56.36`	`tzafrir`	`santoshr, app_sms is a certain protocol for sendig SMS over PSTN. It is a service provided by several PSTN providers. GSM providers support more "native" sms sending`
`07:57.57`	`tzafrir`	`hoobastooba, right, you can't have to entries with the sae name.`
`07:59.36`	`CunningPike`	`hoobastooba: Yes, you can - try what the tutorial says.`
`08:00.02`	`*** join/#asterisk pfn (n=pfnguyen@netblock-66-245-252-239.dslextreme.com)`
`08:00.25`	`bdheeman`	`i'm trying to compile asterisk SVN on debian/testing, the ./configure --with-pwlib=/usr/share/pwlib --with-h323=/usr/share/openh323 is not able to find these libs and, or build chan_h323; both libpt-dev-1.10.2-2 and libopenh323-dev-1.18.0-dfsg-1 are installed and yate builds h323chan from these, how do build chan_h323 for asterisk?`
`08:00.35`	`CunningPike`	`hoobastooba: There are certain authentication circumstances where friend is not exactly the same as a separate user and peer.`
`08:05.44`	`tzafrir`	`bdheeman, I managed to tweak configure.ac to get it to recognize pwlib, but have not gotten past openh323`
`08:07.47`	`bdheeman`	`tzafrir: i also did the sometime back, but i think that was not a good approach, so reinstall/rechecked out the configure.ac from svn, even the autoupdate is not solving this`
`08:08.40`	`hoobastooba`	`but two entries with the same name in the iax.conf (one for user and one for peer) is acceptable, right?`
`08:09.10`	`hoobastooba`	`sorry... missed your earlier reply... disregard.`
`08:10.44`	`*** join/#asterisk Gunnar (n=gunnar@bkkb-gw.voop.net)`
`08:10.45`	`*** part/#asterisk hoobastooba (n=ckwall@c-71-195-199-149.hsd1.ut.comcast.net)`
`08:12.23`	`tzafrir`	`bdheeman, generally: PWLIB_PLATFORM=pt`
`08:12.55`	`tzafrir`	`(instead of: PWLIB_PLATFORM="pt_${something}_r" )`
`08:13.06`	`tzafrir`	`and then you need to run autoconf`
`08:13.19`	`bdheeman`	`ok, let me try it`
`08:14.00`	`tzafrir`	`which won't work in plain 1.4.0. first delete the test for STRLEN (line 258, I believe)`
`08:14.27`	`tzafrir`	`(ugly workaround, a proper fix was already commited into branch 1.4)`
`08:15.29`	`*** join/#asterisk jeffgus (n=jeffgus@greengables.zimage.com)`
`08:17.43`	`*** join/#asterisk stephane_ (n=stephane@gw.sortilege.net)`
`08:22.03`	`sbingner`	`so anybody here who knows whether or not a SIP device may use the same nonce to talk to the same server with two usernames? ie.. reuse nonce server privided for line1 on line2`
`08:22.06`	`santoshr`	`tzafrir: ok`
`08:22.35`	`*** join/#asterisk TheCopsss (n=henri@got.securebinary.com)`
`08:25.01`	`*** join/#asterisk file2 (n=IrcNet@asterisk/developer-and-muffin-lover/file)`
`08:25.01`	`*** mode/#asterisk [+o file2] by ChanServ`
`08:25.10`	`file2`	`moo.`
`08:33.02`	`*** join/#asterisk inspired (n=mikael@85.221.7.59)`
`08:35.41`	`*** join/#asterisk X-Rob_ (n=rob-x@dsl-202-173-151-24.qld.westnet.com.au)`
`08:37.47`	`*** join/#asterisk sahafeez (n=sahafeez@ip68-6-223-92.sd.sd.cox.net)`
`08:38.47`	`*** join/#asterisk pif (n=ldm@zenon.apartia.fr)`
`08:42.46`	`*** part/#asterisk santoshr (i=1063@203.199.110.93)`
`08:49.12`	`*** join/#asterisk badcfe (n=cso@LNeuilly-152-22-86-193.w193-251.abo.wanadoo.fr)`
`08:53.20`	`*** join/#asterisk KermitTheFragger (n=ktf@118-197.bbned.dsl.internl.net)`
`08:53.28`	`*** join/#asterisk psk (n=psk@golia.caltanet.it)`
`08:53.59`	`*** join/#asterisk vgster (n=vgster@cpc2-ledn1-0-0-cust337.leed.cable.ntl.com)`
`09:03.59`	`*** join/#asterisk Zefk (n=Zefk@wsc-fo.b.astral.ro)`
`09:05.43`	`*** join/#asterisk xnon (n=xnon@200.82.222.86)`
`09:06.12`	`Zefk`	`I have a php script that returns the number of available operators in a queue. How can I read this result from * ?`
`09:06.46`	`*** join/#asterisk solar- (n=solar-@213-162-108-136.na931.adsl.metronet.co.uk)`
`09:08.22`	`NightFire91`	`Free Hosting Doesn't come any better than this >> http://www.solarcombat.net/hosting.php`
`09:24.05`	`*** join/#asterisk irq (n=dan@wsip-70-167-112-5.sd.sd.cox.net)`
`09:34.05`	`*** join/#asterisk soylentgreen (n=fgast@193.238.89.34)`
`09:35.07`	`*** join/#asterisk h1 (n=fakhir@ool-44c69d58.dyn.optonline.net)`
`09:35.56`	`*** join/#asterisk Dibbler (n=Dibbler@dsl-217-155-254-174.zen.co.uk)`
`09:42.55`	`*** join/#asterisk penghb (n=nnnnnnnp@202.108.130.138)`
`09:51.27`	`solarcombat`	`Free Hosting Doesn't come any better than this >> http://www.solarcombat.net/hosting.php`
`09:53.21`	`dlynes_laptop`	`any mods around for #asterisk?`
`09:53.35`	`dlynes_laptop`	`solarcombat's some kinda bot...he's on several channels advertising`
`09:56.32`	`*** join/#asterisk [Airwolf] (n=airwolf@86.92.174.235)`
`10:06.29`	`*** join/#asterisk linagee (n=linagee@unaffiliated/linagee)`
`10:07.40`	`*** join/#asterisk badcfe_ (n=cso@LNeuilly-152-22-86-193.w193-251.abo.wanadoo.fr)`
`10:09.27`	`*** join/#asterisk razu_ (n=razu@87-119-182-130.tll.elisa.ee)`
`10:15.20`	`*** join/#asterisk UlbabraB (n=salama@82.88.12.85)`
`10:17.00`	`SheriF_SpacE`	`i have very strange problem with nokia E60 . it register and i can call it .. but when i call it i got that it's busy`
`10:35.02`	`*** join/#asterisk ftexcom (n=info@14.Red-80-26-4.staticIP.rima-tde.net)`
`10:35.07`	`ftexcom`	`this one is easy..`
`10:35.15`	`ftexcom`	`how do I activate the gui on asterisk?`
`10:37.13`	`*** join/#asterisk UlbabraB (n=salama@host85-12.pool8288.interbusiness.it)`
`10:38.36`	`sbingner`	`the PAP2 v1 seems to work better so far`
`10:49.04`	`*** join/#asterisk file2 (n=IrcNet@asterisk/developer-and-muffin-lover/file)`
`10:49.05`	`*** mode/#asterisk [+o file2] by ChanServ`
`10:58.34`	`*** join/#asterisk ric (n=ricardog@dsl-241-14-110.telkomadsl.co.za)`
`11:02.20`	`*** join/#asterisk ruskie (n=ruskie@sourcemage/mage/ruskie)`
`11:02.20`	`*** join/#asterisk Dibbler_Lap (n=Dibbler@212.248.196.179)`
`11:02.23`	`*** join/#asterisk Fugazi (n=apereira@c9510cb0.virtua.com.br)`
`11:12.32`	`*** join/#asterisk ghenry (n=ghenry@suretecsystems.plus.com)`
`11:16.08`	`*** join/#asterisk gr0mit_home (n=Tim@extrt.txrx.org.uk)`
`11:17.09`	`file2`	`moo.`
`11:17.24`	`dlynes_laptop`	`baa`
`11:18.19`	`file2`	`eep.`
`11:19.54`	`file2`	`wazzup?`
`11:21.58`	`gr0mit_home`	`meep`
`11:22.15`	`file2`	`meepmeep.`
`11:22.30`	`gr0mit_home`	`thank goodness that is all over for another year`
`11:22.36`	`dlynes_laptop`	`honk honk`
`11:25.40`	`*** join/#asterisk nsar (n=nsar@ppp76-208.adsl.forthnet.gr)`
`11:25.43`	`nsar`	`hello`
`11:26.07`	`nsar`	`is there any significant progress with stun support in asterisk?`
`11:39.09`	`*** join/#asterisk grexk (i=7c6b5897@gateway/web/cgi-irc/ircatwork.com/x-fa3e39d8ac07f114)`
`11:43.12`	`*** join/#asterisk [Airwolf] (n=airwolf@86.92.174.235)`
`11:44.28`	`*** join/#asterisk Dont_Hate_bia (n=te_lo_me@209.200.133.237)`
`11:46.45`	`So3kris`	`hello. knows sombody if asterisknow distributes a config for the phone ?`
`11:47.50`	`Rawplayer`	`?`
`11:52.34`	`dlynes_laptop`	`So3kris: you mean autoprovisioning scripts?`
`11:53.05`	`So3kris`	`yep`
`11:53.12`	`So3kris`	`if thats including`
`11:53.15`	`dlynes_laptop`	`don't think so, no`
`11:53.19`	`dlynes_laptop`	`if it did`
`11:53.27`	`dlynes_laptop`	`it would have to know what phones you were using`
`11:53.36`	`dlynes_laptop`	`everybody doesn't use the same brands`
`11:53.53`	`So3kris`	`I know. I have at home 3 kinds`
`11:54.07`	`So3kris`	`3 differend types`
`11:54.28`	`dlynes_laptop`	`I have three different brands and three different types right in front of me`
`11:54.37`	`dlynes_laptop`	`Azatel, Sipura, and Aastra`
`11:54.51`	`dlynes_laptop`	`all three are quite different`
`11:55.11`	`dlynes_laptop`	`got a snom around here somewhere, too`
`11:55.17`	`So3kris`	`I want to install it but the server is verry slow :(`
`11:55.32`	`dlynes_laptop`	`buy a faster server`
`11:55.44`	`So3kris`	`now the asterisknow server`
`11:55.57`	`So3kris`	`60KB/sec`
`11:59.14`	`*** join/#asterisk aiksa (n=Miranda@www.crediweb.lv)`
`11:59.31`	`aiksa`	`hi everyone`
`11:59.37`	`So3kris`	`hello`
`12:00.39`	`aiksa`	`I have a strange issue related to queues, i hope somebody has seen the same`
`12:01.24`	`aiksa`	`the layout is like this: AST1 -IAX2->AST2 (queue manager) -SIP-> BT102 (Agents phone)`
`12:01.39`	`aiksa`	`the agent's login is performed via AMI`
`12:01.57`	`aiksa`	`with callbackAgentLogin`
`12:02.19`	`aiksa`	`version of * 1.2.9.1`
`12:02.59`	`aiksa`	`in some cases (I cant track down the circumstances yet), - a channel doesnt get destroyed after the call has ended`
`12:03.38`	`aiksa`	`this happens ~ once in 6 hrs.`
`12:04.14`	`aiksa`	`so at the end of the week - I have a number of undestroyed channels, which I beleive lead to unstbale performnce of the pbx`
`12:04.20`	`aiksa`	`anyone seen this before?`
`12:09.22`	`*** join/#asterisk aadilismail (i=aadilism@9-237-154-202.wol.net.pk)`
`12:10.34`	`xain`	`hi`
`12:15.26`	`*** join/#asterisk timmygospel (n=timm@80-195-204-49.cable.ubr01.perr.blueyonder.co.uk)`
`12:15.48`	`*** join/#asterisk Tili (n=tili@172.Red-88-0-147.dynamicIP.rima-tde.net)`
`12:17.57`	`timmygospel`	`hi people have quick asterisk query ?,relating to using analog phones with tdm400p card`
`12:18.54`	`timmygospel`	`not getting any dial tone when i connect my phone to the card`
`12:23.25`	`*** join/#asterisk shtoom (n=godson@59.181.111.61)`
`12:29.09`	`*** join/#asterisk basty (n=basty@212.218.65.245)`
`12:29.11`	`basty`	`Hi`
`12:29.16`	`*** join/#asterisk lorinc (n=ang@213.178.120.252)`
`12:29.42`	`basty`	`anyone knows if the bug in "http://bugs.digium.com/view.php?id=8064&nbn=33" is already solved in 1.2.14 ?`
`12:30.56`	`*** join/#asterisk phearless (n=phear@host81-138-68-106.in-addr.btopenworld.com)`
`12:32.36`	`*** join/#asterisk Dont_Hate_bia (n=te_lo_me@8.10.2.50)`
`12:47.35`	`*** join/#asterisk RoyK (n=roy@217-175-222.100710.adsl.tele2.no)`
`12:47.53`	`*** join/#asterisk RoyK (n=roy@217-175-222.100710.adsl.tele2.no)`
`12:48.13`	`*** join/#asterisk posixisposi (n=andy@user-0c93jo3.cable.mindspring.com)`
`12:54.52`	`*** join/#asterisk Iamnach0 (i=Iamnacho@ip68-103-140-124.ks.ok.cox.net)`
`13:05.08`	`*** join/#asterisk fourcheeze (n=rich@office.callmaster.co.uk)`
`13:10.01`	`xain`	`hi`
`13:10.28`	`xain`	`if access number is not responding then ... how to check .... ?`
`13:10.30`	`*** join/#asterisk bjohnson (n=bjohnson@jecinc.tor.istop.com)`
`13:13.47`	`*** join/#asterisk robl^ (n=robl@dsl093-025-218.hou1.dsl.speakeasy.net)`
`13:15.10`	`*** join/#asterisk NoNeo (n=chatzill@217.153.12.118)`
`13:21.12`	`*** join/#asterisk stuartcw (n=chatzill@softbank221025056004.bbtec.net)`
`13:21.14`	`*** join/#asterisk Astawerksdotnet (n=doug@63.161.96.170)`
`13:21.29`	`*** join/#asterisk Ebola (n=Ebola@host81-152-204-231.range81-152.btcentralplus.com)`
`13:21.39`	`Astawerksdotnet`	`good monring all`
`13:21.46`	`Astawerksdotnet`	`morning`
`13:22.33`	`robl^`	`shhh! they're sleeping. if you wake them up, they will demand coffee`
`13:23.32`	`*** join/#asterisk su13 (n=su13@xterm.auriga.ru)`
`13:23.44`	`*** part/#asterisk su13 (n=su13@xterm.auriga.ru)`
`13:24.43`	`Astawerksdotnet`	`shoot. i got a few good pots in front of me`
`13:24.54`	`Astawerksdotnet`	`dollar store special`
`13:26.50`	`*** join/#asterisk zotz (n=zotz@24.244.163.157)`
`13:27.17`	`Astawerksdotnet`	`mountain dew is much better but doesn't have the same effect at 830 am`
`13:28.04`	`robl^`	`mmmmmmm.. coffee.. I am actually starting to realize that I am awake`
`13:28.45`	`Astawerksdotnet`	`throw some water in your face. think about jessica simpson WAKEUP! :)`
`13:32.14`	`*** join/#asterisk mikael_ (n=mikael@85.221.7.59)`
`13:32.51`	`*** part/#asterisk NoNeo (n=chatzill@217.153.12.118)`
`13:33.34`	`*** join/#asterisk inspired_ (n=mikael@85.221.7.59)`
`13:33.47`	`*** join/#asterisk TonyM_ (n=TonyM@softins.claranet.co.uk)`
`13:37.23`	`robl^`	`is there any documentation for SLA in 1.4? I find nothing on the wiki`
`13:37.51`	`*** join/#asterisk dioedu (n=dioedu@201.7.117.114)`
`13:39.44`	`dioedu`	`hello, i'm having a problem... Until yesterday, i'm losing a lot of calls. Every calls I have the message: Didn't get a frame for channel: ...`
`13:40.01`	`dioedu`	`Someone knows something about that ?`
`13:41.41`	`Astawerksdotnet`	`i know there is sla i heard about it last week brb i will find something for you`
`13:42.08`	`dioedu`	`txs`
`13:42.10`	`Astawerksdotnet`	`i had a big arguement with a client after i insstalled 1.2.13 with aastra 9133i phones he was pissed because asterisk didn't have sla`
`13:42.26`	`*** join/#asterisk juanjoc (n=juanjoc@201.216.212.113)`
`13:43.15`	`robl^`	`Astawerksdotnet: well most of the time, SLA isn't needed.. just takes learnign the alternatives.`
`13:43.36`	`*** join/#asterisk UlbabraB (n=salama@host85-12.pool8288.interbusiness.it)`
`13:49.45`	`*** join/#asterisk kumbalae (n=suma@cm136.omega182.maxonline.com.sg)`
`13:51.57`	`*** part/#asterisk Crescendo (n=martinda@adsl-072-151-080-148.sip.rmo.bellsouth.net)`
`13:58.46`	`*** join/#asterisk tr2x (n=alvar@89.22.24.251)`
`14:07.32`	`*** join/#asterisk ChkDigit (n=mrw@static24-89-65-166.regina.accesscomm.ca)`
`14:08.19`	`*** join/#asterisk johann8384 (n=jonathan@69.64.10.198)`
`14:09.17`	`*** join/#asterisk kashmish_ (n=kashmish@m1.ince.net)`
`14:10.55`	`*** join/#asterisk frogzoo_ (n=frogzoo@202.155.165.25)`
`14:15.50`	`*** join/#asterisk brad_mssw (n=brad@shop.monetra.com)`
`14:21.12`	`johann8384`	`such an exciting discussion we're having this morning`
`14:21.48`	`*** join/#asterisk Pazzo_ (n=ugelt@dialin-225136.rol.raiffeisen.net)`
`14:22.14`	`*** join/#asterisk nfi\|ermes (n=ermsewrk@217.220.121.62)`
`14:22.32`	`robl^`	`shhhh! they're still sleeping`
`14:24.11`	`*** join/#asterisk Bir_ (n=xyz@85.106.155.151)`
`14:26.36`	`*** join/#asterisk s1gny\|wrk (n=s1gny@p549175E6.dip.t-dialin.net)`
`14:26.46`	`*** part/#asterisk s1gny\|wrk (n=s1gny@p549175E6.dip.t-dialin.net)`
`14:45.18`	`in-pt`	`hi all`
`14:45.33`	`Astawerksdotnet`	`ola`
`14:45.54`	`in-pt`	`can anyone please tell me where i can see differences related to asterisk-1.2 and asterisk-1.4`
`14:46.05`	`in-pt`	`Astawerksdotnet: Ola :)`
`14:46.29`	`Astawerksdotnet`	`theres too many to list here.`
`14:46.59`	`in-pt`	`but is it available somewhere online in asterisk site or somewhere else`
`14:47.52`	`Ez`	`why i am getting a lot of this msg`
`14:47.56`	`Ez`	`Dec 27 09:38:39 DEBUG[4687] chan_iax2.c: Immediately destroying 21, having received INVAL`
`14:47.58`	`Ez`	`^`
`14:48.03`	`Ez`	`^`
`14:48.48`	`Astawerksdotnet`	`there voip-info.org`
`14:51.17`	`*** join/#asterisk ram____ (n=ram@202.63.96.133)`
`14:51.20`	`phearless`	`how do we call : in english ?`
`14:51.30`	`ram____`	`hi all`
`14:52.15`	`*** join/#asterisk Aster (n=eric@205.211.239.11)`
`14:53.04`	`ChkDigit`	`phearless: You mean the "colon"?`
`14:53.12`	`phearless`	`yes`
`14:53.17`	`phearless`	`it is "colon" ?`
`14:53.55`	`phearless`	`http://en.wikipedia.org/wiki/Colon_%28punctuation%29`
`14:53.55`	`ChkDigit`	`Yes. Not to be mistaken for the part of the body with the same name.`
`14:53.56`	`phearless`	`cool`
`14:53.59`	`phearless`	`thanks`
`14:55.07`	`*** join/#asterisk mercestes (n=merceste@rrcs-71-41-157-70.sw.biz.rr.com)`
`14:59.01`	`Astawerksdotnet`	`poopshute`
`14:59.28`	`mercestes`	`Astawerksdotnet: First night on the prison block?`
`15:00.37`	`*** join/#asterisk nortex_work (n=breeves@69.6.154.70)`
`15:01.42`	`*** join/#asterisk N0S3 (n=cristian@host93.201-252-199.telecom.net.ar)`
`15:06.07`	`*** join/#asterisk Dovid (n=Dovid@ool-43530a83.dyn.optonline.net)`
`15:06.08`	`Dovid`	`I have a Polycom 601 with two side cars. I created a list of contacts in XML and it shows up on the side cars exaclty how I set it up in the XXXXXXXXXXXX-directory.xml file (in the order that I wanted it etc.). However when I hit the directories button and then contact directory I see the list in alphabetical order based on the last name. I want it to show up in this list as well in the order that`
`15:06.11`	`Dovid`	`I specified and NOT in alphabedical order.`
`15:06.57`	`*** join/#asterisk apardo (n=apardo@87.217.145.214)`
`15:07.42`	`*** join/#asterisk bjohnson (n=bjohnson@jecinc.tor.istop.com)`
`15:08.42`	`*** join/#asterisk Administrador (i=Administ@212.Red-83-33-148.dynamicIP.rima-tde.net)`
`15:08.46`	`*** join/#asterisk badcfe (n=cso@LNeuilly-152-22-86-193.w193-251.abo.wanadoo.fr)`
`15:09.46`	`Administrador`	`exist a zaptel drivers for windows? for my x100p`
`15:10.18`	`ram____`	`Administrador: from digium`
`15:10.56`	`*** join/#asterisk IPmonger (n=ipmonger@c-68-84-208-206.hsd1.pa.comcast.net)`
`15:12.39`	`Dovid`	`Administrador: not that I know of. there is a version of asterisk that runs on some platform (forgot the name of it), however it is really out dated`
`15:12.49`	`Dovid`	`i think its asterisk 1.X.X`
`15:12.51`	`Dovid`	`oops`
`15:12.55`	`Dovid`	`1.0.X`
`15:13.08`	`*** part/#asterisk [Airwolf] (n=airwolf@86.92.174.235)`
`15:15.34`	`*** join/#asterisk hi365 (n=hi365@bzq-167-158.dsl.bezeqint.net)`
`15:15.56`	`*** join/#asterisk rob0 (n=rob0@cardinal.lizella.net)`
`15:17.53`	`Administrador`	`ok thanks`
`15:18.11`	`Administrador`	`seeing the win drivers....`
`15:21.05`	`*** join/#asterisk pithen (n=pithen@dsl093-233-040.hfd1.dsl.speakeasy.net)`
`15:23.06`	`pithen`	`We have an out-of-state employee who's telephone extension is forwarded to his home office number (via asterisk of course). We can call him using his extension, but if he doesn't answer the call is not forwarded to his telco's voicemail (Verizon). His vm does work however if we dial his 10digit. Oddly, another employee has Comcast and all is fine`
`15:23.10`	`pithen`	`Any thoughts on this?`
`15:24.02`	`Astawerksdotnet`	`how are you fowarding it? what does that part of hte dial plan look like ?`
`15:25.02`	`ram____`	`pithen: show me ur extension dialplan`
`15:27.11`	`pithen`	`Astawerksdotnet, is there a prefered paste site here?`
`15:27.36`	`mercestes`	`pastebin.ca`
`15:28.29`	`pithen`	`Thank you, http://pastebin.ca/293396`
`15:28.40`	`pithen`	`I think that should be sufficient`
`15:28.49`	`*** join/#asterisk [TK]D-Fender (n=joe@MTRLPQ02-1177745839.sdsl.bell.ca)`
`15:29.51`	`mercestes`	`Try passing a time value to it.`
`15:30.41`	`pithen`	`mercestes, I'm sorry, I don't quite understand what you mean`
`15:31.01`	`mercestes`	`Dial($arg1@asterlink,120)`
`15:31.09`	`mercestes`	`for 2 minutes.`
`15:31.53`	`*** join/#asterisk Gankhuu (n=gankhuu@72-166-51-162.dia.static.qwest.net)`
`15:32.01`	`mercestes`	`Sorry, Dial(Sip/${arg1}@asterlink,120)`
`15:33.02`	`pithen`	`mercestes, I'm assuming that simply adds a timeout of 2 min, so it drops the call if it has not been answered by that point, right?`
`15:33.05`	`mercestes`	`that will attempt to force it to ring until the voicemail picks up. I'm pretty sure you can also remove that "Answer" in your dialplan and set canreinvite to yes, but if you get one way voice path, put hte answer back in. I believe it's unnecessary however.`
`15:33.14`	`mercestes`	`pithen: That's the idea.`
`15:33.27`	`mercestes`	`that's also, assuming, that Verizon's voicemail doesn't pick up after 2 minutes.`
`15:33.40`	`*** join/#asterisk riddlebox (n=james@75-132-205-166.dhcp.stls.mo.charter.com)`
`15:33.51`	`pithen`	`mercestes, ahh, i get it, you're saying that asterisk is dropping the call before verizon's vm picks it up`
`15:33.58`	`*** join/#asterisk zapp-branigan (n=zapp-bra@81-202-145-20.user.ono.com)`
`15:34.06`	`mercestes`	`I'm not there so I don't know, but it is possible.`
`15:34.23`	`mercestes`	`Also this is a cell phone, right??`
`15:34.32`	`pithen`	`mercestes, but definately something worth looking into. No, this is a land line`
`15:34.34`	`mercestes`	`for the "home office."`
`15:35.15`	`pithen`	`but using the telcos vm service, so it's the same idea`
`15:35.29`	`mercestes`	`Oh? Didn't know verizon did land lines. Nevermind then. On cell phones, their exchange tends to provide a false "ringing" while it is actually looking for the cell phone, and then ring 3 times. Which sometimes results in 3 rings to Vm, sometimes six. give or take a few rings.`
`15:35.54`	`Astawerksdotnet`	`so is it a house answering machine is that what you are saying ?`
`15:36.11`	`mercestes`	`Nah, I think it's a telco controlled Vm service off of their PBX.`
`15:36.20`	`pithen`	`mercestes, thats interesting, I didn't know that about the rings`
`15:36.57`	`pithen`	`Astawerksdotnet, Nope no answering machine.. You pick up the phone and dial *99 (at least for Comcast, I'm not sure what the code is for Vz), and then type in your password...same idea as with a cellphone`
`15:38.06`	`mercestes`	`pithen: You could always fail to * voicemail as well instead of "hangup". Might be a smart idea so if someone's vm doesn't work...you can just retrain them to use their "new" voicemail.`
`15:38.23`	`mercestes`	`when you dial the 10 digit number? Are you dialing it from a sip phone??`
`15:38.54`	`pithen`	`mercestes, yes. We use SIP (asterlink) for all l/d calls. POTS for local`
`15:39.57`	`mercestes`	`it would be interesting to see what your macro is doing differently than your dialplan.`
`15:40.26`	`pithen`	`let me see if i can find.. This dialplan is a mess right now`
`15:41.27`	`mercestes`	`I would fix that. ;)`
`15:41.51`	`*** part/#asterisk mikefoo (n=mikefoo@166.84.140.254)`
`15:42.15`	`pithen`	`mercestes, me too, although the person with more seniority thinks that the hacked together method is just fine`
`15:43.13`	`pithen`	`exten => _91NXXNXXXXXX,1,SetCallerID(203488xxxx)`
`15:43.13`	`pithen`	`exten => _91NXXNXXXXXX,2,Dial(SIP/${EXTEN:1}@asterlink)`
`15:43.15`	`*** join/#asterisk shido6 (i=shido6@d221-68-200.commercial.cgocable.net)`
`15:45.13`	`*** join/#asterisk Mpls-Eric (n=ejo1@v-209-98-205-186.mn.visi.com)`
`15:45.13`	`riddlebox`	`anyone use xten xlite on fedora core 6?`
`15:45.20`	`*** join/#asterisk frod (n=chatzill@189.150.5.34)`
`15:45.26`	`frod`	`hello all`
`15:45.47`	`*** join/#asterisk anthm (n=anthmct@CPE-69-76-83-52.wi.res.rr.com)`
`15:45.47`	`*** mode/#asterisk [+o anthm] by ChanServ`
`15:45.55`	`frod`	`is asterisk 1.4 more stable than 1.2 ?? does it have T38 Support ??`
`15:49.17`	`Mpls-Eric`	`I'm having a problem that on the surface looks like a typical NUBB problem, I sware there's more to it that that. I have a new installation, attempted from Trixbox1.2.3. Snom320 phones (but tested with softphones and polycom phones). I do not hear files playback. calls from extension to extension work fine, playtones and zapateller operate fine, but no playback, background or voicemail audio is heard. Tried downloading fresh asterisk source`
`15:50.18`	`*** join/#asterisk asdx_ (n=diego@200.61.236.33)`
`15:50.30`	`*** join/#asterisk mesgo (i=asdasd@89.152.104.145)`
`15:50.41`	`[TK]D-Fender`	`Mpls-Eric: What codec are they using?`
`15:51.18`	`ram____`	`Mpls-Eric: enable NAT=yes and try`
`15:51.22`	`tzafrir`	`no timing source?`
`15:51.34`	`Mpls-Eric`	`Tried forcing ulaw and forcing gsm. Also replaced the audio files, didn't work. It appears like a transcoding problem, but ???`
`15:52.10`	`Mpls-Eric`	`TE410E installed, but not yet connected to the T1`
`15:54.20`	`mercestes`	`piten: Sorry, had to go have an adhoc meeting.`
`15:54.21`	`shido6`	`hrmm`
`15:54.26`	`Mpls-Eric`	`Do we even need a timing source to transcode? I didn't think so. Using sip extensions.`
`15:54.39`	`*** join/#asterisk prasoum (n=h2pc@72.93.112.212)`
`15:54.42`	`shido6`	`Ive had this problem b4..`
`15:54.50`	`mercestes`	`pithen: Your dialplan for 10 digit dialing is approx. the same result as your macro. Can you provide CLI output for both instances?? Assuming the timeout value didn't help??`
`15:54.56`	`shido6`	`I didnt have much time so I just recompiled asterisk`
`15:55.02`	`shido6`	`and everything was fine.`
`15:55.18`	`shido6`	`Mpis-Eric`
`15:55.35`	`Mpls-Eric`	`I recompiled asterisk twice, second time taking care to kill off all of the original version.`
`15:56.02`	`prasoum`	`hi...i am a newbie..just installed Trixbox on a dedicated machine...need help`
`15:56.17`	`shido6`	`type your question prasoum`
`15:56.17`	`Mpls-Eric`	`I was going to attack the kernel next and compile without using centos, but wanted to avoid that if I could`
`15:56.35`	`Mpls-Eric`	`centos yum that is...`
`15:56.38`	`shido6`	`hrmm no errors during compilation?`
`15:56.46`	`Mpls-Eric`	`none that I noticed.`
`15:56.53`	`shido6`	`:)`
`15:57.00`	`shido6`	`how are you "testing" playback?`
`15:57.37`	`Mpls-Eric`	`exten 444, priority 1 = zapateller, priority 2 = playback(demo-congrats), etc...`
`15:58.09`	`prasoum`	`thanks....Well my aim is to use trixbox to make free calls abroad..`
`15:58.15`	`Mpls-Eric`	`I can operate the voicemail application by watching the console too. Can't hear a thing, but I can see which file is playing.`
`15:58.21`	`*** join/#asterisk robin_z (n=robin@rapid2.gotadsl.co.uk)`
`15:58.56`	`prasoum`	`Better...can anybody suggest me how to start..`
`15:59.38`	`*** join/#asterisk Dr-Linux (n=Nothing@202.125.139.198)`
`15:59.44`	`ram____`	`prasoum: where are u from ?`
`15:59.52`	`*** join/#asterisk mega (n=mega@217.201.78.6)`
`16:00.16`	`*** join/#asterisk paolob (n=donpaolo@pri-214-b7.codetel.net.do)`
`16:00.30`	`ram____`	`prasoum: just install trix box, and register sip provider accounts, register ur SIP Device, start making calls`
`16:00.35`	`*** part/#asterisk paolob (n=donpaolo@pri-214-b7.codetel.net.do)`
`16:01.59`	`[TK]D-Fender`	`~trixbox`
`16:02.10`	`jbot`	`i heard trixbox is NOT supported here! Trixbox is extensively modified with patches, custom configuration files, and so on. In particular, FreePBX (the GUI that comes with trixbox) includes giant creeping thing-like macros which invade your dialplan, making debugging and customization extremely difficult. Since it doesn't work the same as regular Asterisk, ...`
`16:02.11`	`mercestes`	`pithen: well, msg me if you need more help....i'm going to go upgrade a firewall..`
`16:02.18`	`*** join/#asterisk jcmoore (n=jcmoore@unaffiliated/tgrman)`
`16:02.26`	`*** join/#asterisk marv[work] (n=timr@24.214.206.254)`
`16:02.44`	`iCEBrkr`	`Well, this is weird. I see traffic on both ends, yet the one asterisk box won't register. :(`
`16:02.52`	`Igbothom_III`	`yup, for trixbox support, use (amazingly) the trixbox forums`
`16:02.52`	`Mpls-Eric`	`Anyone have ideas for me on the no playback audio problem.`
`16:02.53`	`*** join/#asterisk andrew123456as (n=Andrew@ACBC0768.ipt.aol.com)`
`16:03.07`	`andrew123456as`	`hello?`
`16:03.39`	`andrew123456as`	`I'm looking for a fdwe tips on my first ever asterisk install`
`16:03.50`	`Igbothom_III`	`then ask a question`
`16:04.05`	`andrew123456as`	`very simple ones to start`
`16:04.16`	`Mpls-Eric`	`OK, an update, I removed all the loaded modules completely and I now have it working. I'll load the modules one at a time again and find when it dies again.`
`16:04.18`	`Igbothom_III`	`(sigh)`
`16:04.22`	`andrew123456as`	`if I have two lines entering the building both going into the server`
`16:04.30`	`Igbothom_III`	`are you going to ask a question, or tell us you are going to ask one?`
`16:04.49`	`Igbothom_III`	`analog or digital lines?`
`16:04.50`	`Mpls-Eric`	`Working best without a timing source I guess`
`16:04.54`	`andrew123456as`	`will people only have to know one of the numbers?`
`16:05.22`	`andrew123456as`	`for example if I have 132456 and 237894`
`16:05.22`	`*** join/#asterisk ToyMan (n=Stuart@74-32-29-24.dsl1.mdl.ny.frontiernet.net)`
`16:05.29`	`Igbothom_III`	`depends if you want to use them both - give them one number, they can use that one, give them both, they can use both!`
`16:05.45`	`andrew123456as`	`so if 1 person rings on number a`
`16:05.48`	`Igbothom_III`	`<Igbothom_III> analog or digital lines?`
`16:05.50`	`andrew123456as`	`that line becomes busy`
`16:05.56`	`andrew123456as`	`analoge`
`16:06.01`	`Igbothom_III`	`of course it does - it is a phone line`
`16:06.13`	`andrew123456as`	`if another person rings that line will they get through or get busy tone`
`16:06.35`	`Igbothom_III`	`they will get busy - an Asterisk box won't magically make the phone lines do stuff they cannot do now`
`16:06.50`	`andrew123456as`	`I ask because in my office`
`16:07.06`	`andrew123456as`	`externally we have one number 816500`
`16:07.19`	`andrew123456as`	`people only ring that number.. but we have 10 lines`
`16:07.22`	`Igbothom_III`	`if you have a "forward on busy" configured at the phone provider, then it will forward to the second number, and you'll likely pay for the forwarded call`
`16:07.27`	`shido6`	`ok im back`
`16:07.29`	`*** join/#asterisk greekman (n=greekman@86.68.234.55)`
`16:07.34`	`Igbothom_III`	`they use digital lines, almost guaranteed`
`16:07.47`	`andrew123456as`	`cool`
`16:07.55`	`andrew123456as`	`so its an external service thanks...`
`16:08.03`	`shido6`	`um...`
`16:08.04`	`shido6`	`ok`
`16:08.09`	`shido6`	`try just a playback`
`16:08.12`	`shido6`	`as priority 1`
`16:08.15`	`Igbothom_III`	`its the same service you'd to do it without the Asterisk box`
`16:08.27`	`Igbothom_III`	`your phone company`
`16:08.28`	`shido6`	`and dial from one of your zap or sip or iax phones`
`16:08.39`	`shido6`	`Mpis-Eric`
`16:09.03`	`andrew123456as`	`thanks for the answer igbothom`
`16:09.32`	`Igbothom_III`	`np - Asterisk can do things ONCE the line gets to you, but cannot provide services that the phone company has to`
`16:09.39`	`*** join/#asterisk pifiu (n=someone@216.5.79.1)`
`16:09.40`	`shido6`	`when you run Asterisk you should remove the modules you dont need anyway :) just read your post`
`16:09.54`	`greekman`	`Hi everyone,I am searching for greek voice prompts,do someone have information?`
`16:10.04`	`andrew123456as`	`anopther simple on for you...can it determine whether it is a fax / voice call and direct appropriately?`
`16:10.11`	`Igbothom_III`	`yup`
`16:10.16`	`pifiu`	`does anyone know how to do survey's with asterisk? for example after a call is made, and I want to have the caller rate the service rep`
`16:10.19`	`pifiu`	`after the call is done`
`16:10.35`	`shido6`	`do u need to insert data into a db?`
`16:10.40`	`pifiu`	`answer 2 or 3 questions and perform statistics on it to gather information about the quality satisfaction`
`16:10.48`	`Igbothom_III`	`pifu - easy, have the op send to an extension/queue`
`16:10.50`	`pifiu`	`well i would need to analyze it`
`16:10.56`	`[TK]D-Fender`	`pifiu: Its just more dialplan and basic IVR stuff like all the rest. How you store and process your info is up to you`
`16:11.04`	`shido6`	`using mysql I've done this b4 for a restaraunt`
`16:11.10`	`[TK]D-Fender`	`pifiu: Perhaps you should learn to program :)`
`16:11.23`	`pifiu`	`LOL fender`
`16:11.26`	`shido6`	`if you do it yourself you dont have to pay anyone else to do it.`
`16:11.30`	`pifiu`	`i wish i had the patience =P`
`16:11.40`	`*** join/#asterisk ManxPower (n=manxpowe@dpc67142183150.direcpc.com)`
`16:11.57`	`pifiu`	`fender any examples of how this would be done? im not planning on implementing this right now, just to feed my curiosity`
`16:11.58`	`[TK]D-Fender`	`pifiu: Then just go hire someone, and don't ask too many questions.... that'll raise the cost for "training" :)`
`16:12.05`	`pifiu`	`lol`
`16:12.13`	`Igbothom_III`	`as they should`
`16:12.23`	`*** join/#asterisk [tasty]freeze (n=simba@204-181-50-10.skybest.com)`
`16:12.35`	`*** join/#asterisk to1 (n=tom@ip-66-235-250-60.sterlingnetwork.net)`
`16:12.38`	`[tasty]freeze`	`What is the best quality audio codec to use? Would PCMA?`
`16:12.52`	`Qwell[]`	`g722?`
`16:12.55`	`[tasty]freeze`	`with little regard for bandwidth`
`16:13.15`	`*** join/#asterisk daedius (n=anaya@mailboy.snapstream.com)`
`16:13.21`	`[TK]D-Fender`	`[tasty]freeze: indeed... G.722 is for you! Good luck finding much taht SUPPORTS it however`
`16:13.23`	`[tasty]freeze`	`thats the same as PCMA isn't it.`
`16:13.31`	`daedius`	`goodmorning all`
`16:13.45`	`[TK]D-Fender`	`[tasty]freeze: For anthing that actually involves calls to the REAL world, ULAW/ALAW depending on where you live`
`16:14.00`	`mercestes`	`Or g729. >.>`
`16:14.09`	`[TK]D-Fender`	`[tasty]freeze: No, G.722 is wdieband, and only exists in the world of computers really.`
`16:14.36`	`daedius`	`I'm looking for a solution that can take a phone line ( say my extension at work ) and VOIP it to say my home computer. Is this possible with asterisk?`
`16:15.07`	`[TK]D-Fender`	`daedius: definately`
`16:15.09`	`*** join/#asterisk mtaht4 (n=m@c-71-198-23-124.hsd1.ca.comcast.net)`
`16:15.29`	`daedius`	`Awesome, then i'm in the right place =)`
`16:15.41`	`daedius`	`I'm having a bit of difficulty figuring out what hardware I need for just one line`
`16:15.58`	`*** part/#asterisk mercestes (n=merceste@rrcs-71-41-157-70.sw.biz.rr.com)`
`16:16.01`	`daedius`	`Any tutorial recommendations for this kind of setup i'm after?`
`16:16.10`	`[tasty]freeze`	`hmmm is it a general rule that the lower numbers are better quality? since i do not have g722, would g723 be the next best?`
`16:16.10`	`[TK]D-Fender`	`daedius: if you want to be cheap, get an X100P (look it up). Its crappy but will often get the job done.`
`16:16.13`	`*** join/#asterisk ESCulapio__ (n=ESCulapi@200.88.44.66)`
`16:16.14`	`*** join/#asterisk mercestes (n=merceste@rrcs-71-41-157-70.sw.biz.rr.com)`
`16:16.28`	`ESCulapio__`	`quien habla espanol`
`16:16.31`	`ESCulapio__`	`??`
`16:16.42`	`daedius`	`[TK]D-Fender, crappy as in how?`
`16:16.45`	`mercestes`	`WEll, is your work extension a standard analog line or is it a digital phone fed off a turnkey pbx?`
`16:16.47`	`[tasty]freeze`	`un poco, pero mi espanol is muy mal`
`16:16.49`	`[TK]D-Fender`	`daedius: Otherwise your next best bets are Linksys SPA-3XXX series gateways, Digium TDM400P , and Sangoma A200 (all in order of cost)`
`16:16.57`	`pithen`	`mercestes, It appears that i should have verified that a problem existed before looking into it's cause`
`16:17.22`	`mercestes`	`pithen: lol. Rule #1..;)`
`16:17.36`	`[TK]D-Fender`	`daedius: Greater risk of echo problems, IRQ requirements, and variable disconnect supervision troubles`
`16:18.07`	`pithen`	`mercestes, I just dialed from both the extension and 10 digit to get the cli output and both went into vm.. of course it could be a spontaneous thing so i'll have to look into it a little more.`
`16:18.15`	`pithen`	`mercestes, i appreciate the help though :)`
`16:18.17`	`[TK]D-Fender`	`[tasty]freeze: G.723 is a compressed codec, and not typically available or suggestable. it is on the LOWER end of the quality scale. Bigger # != better`
`16:19.00`	`daedius`	`[TK]D-Fender, when I saw this card. I didn't quite understand why it had 4 ports in the back. Do these cards connect to multiple lines for more quality? or are some of them outgoing lines`
`16:19.17`	`daedius`	`( ports = telephone jacks )`
`16:19.21`	`[tasty]freeze`	`[TK]D-Fender then what would yousuggest, since g.722 is not avaliable... I'm really looking for quality voice.`
`16:19.36`	`[TK]D-Fender`	`daedius: A line is a line out or in. The last 2 are multiple port cards, though YOU only need 1.`
`16:19.52`	`[TK]D-Fender`	`[tasty]freeze: ULAW/ALAW dependong on where you are.`
`16:19.53`	`[tasty]freeze`	`at the moment i believe i have pcma/g.711a picked.`
`16:20.02`	`[TK]D-Fender`	`[tasty]freeze: Then thats it.`
`16:20.03`	`[tasty]freeze`	`okay.`
`16:20.06`	`[tasty]freeze`	`thank you.`
`16:21.28`	`EyeCue`	`[TK]D-Fender, selection or [a/u]law based on the standard used in that location ?`
`16:21.57`	`[TK]D-Fender`	`EyeCue: Correct. ULAW is the standard in North America and a few other places, ALAW in most others`
`16:22.06`	`EyeCue`	`for .au ?`
`16:22.14`	`*** join/#asterisk MagicFab (n=fabian@ubuntu/member/magicfab)`
`16:22.16`	`pifiu`	`oh 1.4 was releaseed! lol im so un-up to date lol`
`16:22.22`	`Igbothom_III`	`ALAW`
`16:22.26`	`[TK]D-Fender`	`EyeCue: ALAW I believe, but I'd ask around elsewhere if I were you.`
`16:22.41`	`brookshire`	`pifiu: it's on digg.com main page.. well was`
`16:22.41`	`MagicFab`	`hi - is asterisk 1.4 already in Ubuntu Feisty (7.04) ?`
`16:22.43`	`EyeCue`	`is there a fundamental problem running ulaw in a lone server/implementation ?`
`16:22.56`	`brookshire`	`MagicFab: doubt it, it was released yesterday`
`16:23.08`	`daedius`	`[TK]D-Fender, thanks for the information =) going to have to research this hardware more`
`16:23.44`	`[TK]D-Fender`	`EyeCue: nope. the worst you'll even encounter is an increased translation load if you even need to convert a call TO something else. That ULAW to ALAW is less than signiificant`
`16:23.52`	`mercestes`	`pithen: Anytime`
`16:23.55`	`EyeCue`	`roger`
`16:24.15`	`EyeCue`	`so use what everyone else is using for efficincy sake`
`16:24.23`	`brookshire`	`MagicFab: if you just want to play with it, you can download the asterisknow beta3 vmware image.. it uses asterisk 1.4 in its core`
`16:24.40`	`[TK]D-Fender`	`EyeCue: Exactly. Aim for your telco's norm`
`16:24.43`	`MagicFab`	`brookshire, interesting - tx`
`16:24.52`	`EyeCue`	`gah why cant i remove java build 10 :\|`
`16:25.07`	`brookshire`	`although, i do not recomend running asterisk in production in vmware`
`16:25.10`	`EyeCue`	`thats why i dont let it update itself :\|`
`16:26.04`	`mercestes`	`brookshire: Poppycock! I run a class 3 commercial call switching center entirely in vmware on my laptop`
`16:26.13`	`*** join/#asterisk mega (n=mega@217.201.78.6)`
`16:26.15`	`mercestes`	`ok.....I lied...:( but wouldn't that be cool??`
`16:26.45`	`brookshire`	`mercestes: i would so like to know how you did that :)`
`16:26.45`	`Strom_M`	`is there even such a thing as a class 3 office any more?`
`16:26.54`	`mercestes`	`only in vmware`
`16:26.56`	`brookshire`	`hey.. vmware is actually fine, if you plan it right..`
`16:26.59`	`ManxPower`	`mercestes: I would call it my worst nightmare.`
`16:27.02`	`Strom_M`	`I thought all that hierarchical stuff went away in the 80s :)`
`16:27.06`	`[TK]D-Fender`	`What mercestes meant to say is "secondrate" ;)`
`16:27.08`	`brookshire`	`xen is better :)`
`16:27.35`	`brookshire`	`only reason i would use xen or vmware is to create virtual pbxs for customers...`
`16:27.43`	`daedius`	`brookshire, have you heard about the new KVM being integrated into the kernel?`
`16:27.58`	`daedius`	`in 2.6.20`
`16:28.04`	`brookshire`	`daedius: never head of kvm`
`16:28.13`	`brookshire`	`i know xen is already in the kernel :)`
`16:28.25`	`ManxPower`	`I like VMWare, but their workstation product has gotten so complicated`
`16:28.39`	`brookshire`	`oh yeah.. vmware is far easier than xen`
`16:28.47`	`brookshire`	`it's a great product`
`16:28.56`	`daedius`	`yah, neither had I. kernel virtualized machine is a hyporvisor like xen in a way. But its going to be the first major virtaulization technology to make it into the vanilla kernel`
`16:29.20`	`*** join/#asterisk slayer192 (n=slayer19@66.138.39.225)`
`16:29.27`	`daedius`	`xen is supposedly going to build off of it long term`
`16:29.29`	`*** part/#asterisk mega (n=mega@217.201.78.6)`
`16:29.52`	`daedius`	`or int otherwords, xen will come standard supported on all new linux kernels :P`
`16:29.55`	`daedius`	`which would rock`
`16:30.08`	`mercestes`	`daedius: Which kernel??`
`16:30.12`	`mercestes`	`oh.`
`16:30.15`	`daedius`	`THE Kernel :P`
`16:30.16`	`mercestes`	`all new linux kernels eh?`
`16:30.19`	`daedius`	`yah`
`16:30.22`	`mercestes`	`Hm...`
`16:30.36`	`mercestes`	`Why do I see that being converted into a use flag in gentoo?`
`16:30.42`	`[TK]D-Fender`	`mercestes: Orville Redenbacher's`
`16:30.48`	`daedius`	`lols`
`16:30.59`	`mercestes`	`OOO! The buttery salty tastyness of KVM kernels! yes!`
`16:31.14`	`daedius`	`MMmm Mmm`
`16:32.12`	`RoyK`	`wtf is a kvm kernel?`
`16:32.57`	`daedius`	`kvm is a kernel driver for virtualization of hardware`
`16:32.58`	`rob0`	`Keyboard-video-mouse [switch] ?`
`16:33.10`	`daedius`	`kvm ( kernal virtualizaed machine )`
`16:33.13`	`rob0`	`ah`
`16:33.14`	`daedius`	`the naming is horrible , yes =(`
`16:34.20`	`*** part/#asterisk andrew123456as (n=Andrew@ACBC0768.ipt.aol.com)`
`16:34.21`	`E-bola`	`lol`
`16:36.46`	`RoyK`	`daedius: is this related to uml?`
`16:37.10`	`daedius`	`unified modeling language? :P no`
`16:37.34`	`rob0`	`User-mode Linux is already in the standard kernel source.`
`16:37.47`	`daedius`	`its about virtualization (i.e. giving your computer schitzophrenia )`
`16:38.17`	`rob0`	`make ARCH=um $TARGET`
`16:39.59`	`RoyK`	`daedius: what sort of virtualisation? adding a layer between kernel and drivers?`
`16:40.48`	`daedius`	`Mnn.. more than that. Its hardware virtualization. Like running an operating system within an operating system.`
`16:41.49`	`*** join/#asterisk hfb (n=hfb@pool-71-118-252-158.lsanca.dsl-w.verizon.net)`
`16:41.53`	`daedius`	`perhaps emulation is what most people understand easily, but its not really quite emulation`
`16:42.23`	`daedius`	`emulating a partition of your x86 cpu, harddrive, memory, etc`
`16:42.25`	`mercestes`	`LIke Vmware or xms`
`16:42.29`	`daedius`	`Ja =)`
`16:42.32`	`mercestes`	`...`
`16:42.35`	`mercestes`	`xen I mean..not xms`
`16:42.37`	`mercestes`	`sighs`
`16:42.40`	`daedius`	`lols :P`
`16:42.43`	`mercestes`	`...I have got to kick this caffeine addiction.`
`16:42.47`	`mercestes`	`it jacks with my brain`
`16:45.28`	`ManxPower`	`latte too`
`16:45.41`	`*** join/#asterisk smurf_ (n=smurf@smurf.noris.de)`
`16:46.52`	`*** part/#asterisk smurf_ (n=smurf@smurf.noris.de)`
`16:47.09`	`*** join/#asterisk Astawerksdotnet (n=doug@63.161.96.170)`
`16:47.34`	`johann8384`	`i created a new manager privilege called reporting and updated the RTCP manager events "bug" if anyone is ineterested #8613.`
`16:48.28`	`Qwell[]`	`nub question`
`16:48.45`	`Qwell[]`	`When you register with iax2, how do you tell it the context/exten to go to?`
`16:48.47`	`Qwell[]`	`It's just like`
`16:48.58`	`Qwell[]`	`register => user:pass@host/exten@context, right?`
`16:49.04`	`*** join/#asterisk smurf_ (n=smurf@smurf.noris.de)`
`16:49.20`	`johann8384`	`yeah the dial string and/or the user in iax.conf tell it what context to use`
`16:49.36`	`Qwell[]`	`it seems to be ignoring the context in iax2.conf`
`16:49.42`	`johann8384`	`context= or dial iax2/host/ext@context`
`16:49.51`	`*** part/#asterisk smurf_ (n=smurf@smurf.noris.de)`
`16:49.52`	`Qwell[]`	`it's sending it to s@default`
`16:50.14`	`johann8384`	`try dialing IAX2/user:password@host/context@extension`
`16:50.23`	`Qwell[]`	`it's a provider.. I only control the registering side`
`16:50.57`	`johann8384`	`do you have context= in the iax.conf (for that specific user not in general) and the extension being dialed in that context?`
`16:51.19`	`Qwell[]`	`yeah, I've got context=blah, but it still goes to s,default`
`16:51.32`	`johann8384`	`some providers send it as a 10 digit extension (ex NXXNXXXXXX), so do it like this +1NXXNXXXXXX and of course if you are not in the US it may be very different`
`16:51.49`	`johann8384`	`do an iax2 debug and see what context and extension they are sending the call to`
`16:51.56`	`Qwell[]`	`did, it's s@default :p`
`16:52.09`	`Qwell[]`	`even though I have context=blah`
`16:52.32`	`Qwell[]`	`and I added both s@blah and 5551212@blah...it's not even trying`
`16:52.35`	`johann8384`	`they are dialing s@default on your box? sounds kinda stupid to me....you can't fix stupid`
`16:52.57`	`Qwell[]`	`am I wrong in thinking that you can add exten to dial in the register statement?`
`16:52.58`	`russellb`	`Qwell[]: i didn't even know that was a feature.`
`16:53.07`	`Qwell[]`	`russellb: which?`
`16:53.14`	`russellb`	`Qwell[]: the register thing you're trying to do`
`16:53.19`	`russellb`	`i know you can do that in sip .....`
`16:53.30`	`Qwell[]`	`it may not be - I'm looking at iax2_register(), and I'm seeing squat, heh`
`16:53.33`	`russellb`	`:)`
`16:53.58`	`Qwell[]`	`russellb: basically, Pari is trying to do something for the GUI, and he has registeriax=yes, and it's registering fine, but it's going to s@default :(`
`16:54.11`	`johann8384`	`i didn't think it was but I don't know for sure so I didnt' want to squash it :)`
`16:54.12`	`Qwell[]`	`just wanted to make sure I'm not nubbing something up`
`16:54.27`	`johann8384`	`paste bin the iax2 debug`
`16:54.38`	`Qwell[]`	`it's going to s@default for sure :D`
`16:54.38`	`russellb`	`Qwell[]: ok, so the other side should call the right extension :)`
`16:54.58`	`johann8384`	`ok yeah they need to fix that or you need to accept it....i'd make em fix it`
`16:55.01`	`Qwell[]`	`but, shouldn't it be trying the context I specified?`
`16:55.10`	`Qwell[]`	`s@blah would be fine - we can work around that`
`16:55.32`	`russellb`	`Qwell[]: what context you specific`
`16:55.35`	`russellb`	`specified*`
`16:55.51`	`riddlebox`	`wohoo I got my group-callpickup working!`
`16:55.52`	`johann8384`	`if they are specifying the context I think it will try to go there if they don't have access to that context it will return "no authority found"`
`16:56.00`	`*** part/#asterisk BSDTech (n=RNeese@ppp-69-238-216-111.dsl.irvnca.pacbell.net)`
`16:56.05`	`Qwell[]`	`it's just 404ing`
`16:56.13`	`riddlebox`	`its nice when you actually just read the wiki about stuff ;)`
`16:56.16`	`johann8384`	`but they have access to default and the context you specified in your config unless you don't have a context for unauthenticated users`
`16:56.31`	`Qwell[]`	`johann8384: well, I'm registering, so of course they have access :D`
`16:56.52`	`Qwell[]`	`unless it's just something funky with users.conf`
`16:57.33`	`johann8384`	`i'd call them and get them to fix the context they are dialing, and the extension to really`
`16:57.48`	`Qwell[]`	`I guess that's the question.. can the provider specify a context?`
`16:57.53`	`johann8384`	`yeah`
`16:58.05`	`johann8384`	`dial iax2/host/ext@context`
`16:58.25`	`johann8384`	`roughly`
`16:58.34`	`*** join/#asterisk asdx (n=diego@200.61.236.33)`
`16:58.42`	`*** join/#asterisk andresmujica (n=andresmu@190.24.226.206)`
`17:00.00`	`Qwell[]`	`I wonder if this include => default is messing with it somehow...`
`17:00.18`	`johann8384`	`nope, not likely`
`17:01.03`	`johann8384`	`you said they are specifying default in the iax2 debug you saw right? that's the problem`
`17:02.24`	`riddlebox`	`wow, 10 minutes on the wiki and I have the group call pickup working and intercoming extensions working! wasted 2 days trying to figure it out myself!`
`17:02.55`	`mercestes`	`nice.`
`17:03.59`	`riddlebox`	`group-pickup is pretty easy, considering it is in features.conf, and there are two lines you add to sip.conf or whatever your phones are`
`17:04.57`	`isladelobos`	`!man`
`17:05.02`	`isladelobos`	`!help`
`17:05.20`	`ManxPower`	`!ask your damn question`
`17:05.36`	`Strom_M`	`!catsex`
`17:05.49`	`Qwell[]`	`it must just not be matching a peer`
`17:06.21`	`isladelobos`	`!ask`
`17:06.23`	`ManxPower`	`Qwell[]: NOW you understand why I put context=INVALID in [general] and specfy the correct contecxt in each of the friend/user/peers`
`17:06.27`	`isladelobos`	`XDD`
`17:06.38`	`isladelobos`	`!ask ivr`
`17:06.54`	`Qwell[]`	`ManxPower: well, this is users.conf, so it's a bit different - but yes, I see`
`17:07.09`	`*** join/#asterisk s0lid (n=jlq@210.213.243.68)`
`17:07.09`	`*** join/#asterisk RoyKa (n=roy@217-175-39.100710.adsl.tele2.no)`
`17:07.12`	`ManxPower`	`Qwell[]: users.conf? Must be a newfangled 1.4 thing`
`17:07.15`	`Qwell[]`	`ManxPower: is`
`17:07.55`	`Qwell[]`	`so, what's the #1 reason for not matching an iax2 peer on an incoming (registered) call?`
`17:08.14`	`Qwell[]`	`it's basically a type=user and also a type=peer entry`
`17:08.20`	`mercestes`	`incompatible zodiac signs. THey just aren't fated to be.`
`17:08.42`	`ManxPower`	`Qwell[]: for me, it's usually an auth problem`
`17:09.07`	`Qwell[]`	`ManxPower: outgoing/register works fine using the same user/pass, but it's possible I'm missing something in the peer definition`
`17:09.15`	`Qwell[]`	`or, he, rather`
`17:09.31`	`ManxPower`	`peers are for outgoing, users are for incoming`
`17:09.43`	`mercestes`	`The peer/user/friend stuff is ....convoluted at best, atleast for me...on minimal caffeine. So it's usually, like Manx said, an auth problem, largely due to confused user@server syntax and peer/usr syntax`
`17:09.44`	`ManxPower`	`for incoming the expected username is what is in [brackets]`
`17:09.45`	`Qwell[]`	`okay, other way around then`
`17:10.10`	`ManxPower`	`username= is only for OUTGOING from the asterisk server`
`17:10.34`	`*** part/#asterisk Qwell[] (i=qwell@unaffiliated/qwell)`
`17:10.39`	`*** join/#asterisk Qwell[] (i=qwell@unaffiliated/qwell)`
`17:10.39`	`*** mode/#asterisk [+o Qwell[]] by ChanServ`
`17:10.41`	`Qwell[]`	`woops`
`17:11.13`	`ManxPower`	`In 1.4 things changed a bit, so I can only comment on 1.2/1.0`
`17:13.47`	`*** join/#asterisk ToyMan (n=Stuart@74-32-29-24.dsl1.mdl.ny.frontiernet.net)`
`17:13.53`	`Qwell[]`	`I wonder if it's matching the guest user for some reason`
`17:14.25`	`ManxPower`	`Qwell[]: it will if it matches notihng else.`
`17:14.40`	`ManxPower`	`just make sure guest is the last section`
`17:16.20`	`ManxPower`	`As far as I can tell, Asterisk will match anything when you want it to match one one item, and match nothing when you want it to match anything.`
`17:16.28`	`Techie-Micheal`	`Hrm. I just set [username] and username= to the same thing, works okay for me.`
`17:16.41`	`RoyK`	`~sex`
`17:16.43`	`jbot`	`updatedb; locate; talk; date; cd; strip; look; touch; finger; unzip; uptime; gawk; head; apt-get install condom; mount; fsck; gasp; more; yes; yes; yes; more; umount; apt-get remove --purge condom; make clean; sleep, or super extractor, http://sf.net/projects/sex/`
`17:16.49`	`Sauron	`Manx, did you ever see the last pastebin I gave you?`
`17:16.58`	`ManxPower`	`Techie-Micheal: if type=user then you should be able to remove the username=`
`17:17.24`	`ManxPower`	`Sauron: no, but I'm leaving soon. Did you make any progress?
`17:17.31`	`Qwell[]`	`if I register => abc:blah@host`
`17:17.36`	`Techie-Micheal`	`I just set it to friend and it works. shrugs`
`17:17.37`	`Sauron	`Nope`
`17:17.37`	`Qwell[]`	`I need [abc] type=user, yes?`
`17:17.42`	`Sauron	`uber-simple dialplan`
`17:17.45`	`Sauron	`it still craps out`
`17:17.52`	`Sauron	`http://pastebin.ca/293151`
`17:18.11`	`ManxPower`	`Qwell[]: that depends on the provider. some providers always use a standard auth for sending calls to users.`
`17:18.21`	`ManxPower`	`iax2 debug should tell you what username the provider is sending you.`
`17:18.26`	`Qwell[]`	`it didn't, heh`
`17:18.27`	`*** join/#asterisk s0lid101101 (n=jlq@210.213.243.68)`
`17:19.23`	`ManxPower`	`Sauron: try it without the wait
`17:19.27`	`ManxPower`	`just for the hell of it.`
`17:20.26`	`Sauron	`Okay, now we're getting somewhere`
`17:20.51`	`[TK]D-Fender`	`Sauron: If I were you I'd turn up the SIP debug on that call....
`17:21.01`	`*** join/#asterisk spunz (n=spunz@h081217096236.dyn.cm.kabsi.at)`
`17:21.57`	`Sauron	`Manx: http://pastebin.ca/293473`
`17:22.08`	`Sauron	`Now I'm getting the error from Background`
`17:22.22`	`ManxPower`	`Sauron: what error?
`17:22.32`	`Sauron	`file.c:616 ast_readaudio_callback: Failed to write frame`
`17:22.48`	`ManxPower`	`that is usually "the far side hung up"`
`17:23.09`	`Sauron	`Hum`
`17:23.09`	`ManxPower`	`I assume you have /var/lib/asterisk/sounds/moo1.wav or gsm or whatever`
`17:23.20`	`ManxPower`	`in fact what type of audio file IS moo1 ?`
`17:23.24`	`Sauron	`.gsm`
`17:23.43`	`ManxPower`	`why not try playing one of the standard asterisk autopfiles`
`17:24.04`	`ManxPower`	`I can't type today`
`17:24.10`	`Sauron	`Shrug, I don't care`
`17:24.19`	`Sauron	`It was a file I knew used to work, and I knew the name of it. :)`
`17:25.58`	`[TK]D-Fender`	`Sauron: Time to do a SIP debug on the call....
`17:26.08`	`Sauron	`I am`
`17:26.13`	`*** join/#asterisk pussfeller (n=Friendof@166-82-183-46.quickclick.ctc.net)`
`17:27.55`	`Sauron	`Hm.`
`17:29.35`	`Sauron	`Hehn`
`17:29.47`	`Sauron	`I love how "disable console coloration" still doesn't disable all ANSI escapes...`
`17:29.51`	`Sauron	`blech`
`17:33.27`	`pussfeller`	`setting the txgain in the zap conf seems to have increased the volume of the MOH and IVR announcements, but not the sip ext transmit volume`
`17:33.57`	`pussfeller`	`maybe i need to ramp it up to something like 75`
`17:34.39`	`Sauron	`Umm, zap txgain is unrelated to SIP volume`
`17:34.42`	`Sauron	`It's a zap setting`
`17:35.00`	`Sauron	`Manx, Fender: http://pastebin.ca/293490`
`17:35.22`	`pussfeller`	`well, shouldnt it increase the over all volume being sent out over the pstn line`
`17:35.39`	`Sauron	`It should`
`17:35.51`	`Sauron	`you're talking about not increasing outbound sip-originated calls?`
`17:35.54`	`pussfeller`	`and, is there something that will increase volume of a particular sip extension`
`17:36.03`	`*** join/#asterisk frod_ (n=chatzill@189.150.5.34)`
`17:36.24`	`pussfeller`	`afaik, its only on the calls going out on the land line`
`17:36.29`	`DrkShdw`	`has anyone seen a patch to colorize the asterisk console logs? I was talking to a guy today, and he was saying his logs were colorized, then he showed me.`
`17:36.43`	`Sauron	`They are, by default.`
`17:36.49`	`rob0`	`DrkShdw: What terminal are you using?`
`17:36.59`	`Sauron	`Well, as long as your termcap tells it it's color-capable, I assume`
`17:37.01`	`DrkShdw`	`I was just going to say, must be my term`
`17:38.05`	`rob0`	`correct, any color xterm should work, or the Linux console.`
`17:38.41`	`DrkShdw`	`ok. I don't have access to an asterisk box here, but I'll look this evening.`
`17:38.47`	`DrkShdw`	`thanks`
`17:39.11`	`*** join/#asterisk Qwell (n=north@unaffiliated/qwell)`
`17:39.11`	`*** mode/#asterisk [+o Qwell] by ChanServ`
`17:41.58`	`RoyK`	`~successful`
`17:41.59`	`jbot`	`rumour has it, successful is http://karlsbakk.net/fun/asterisk-installation.wav`
`17:44.51`	`*** join/#asterisk h0 (n=fakhir@unaffiliated/fakhir)`
`17:45.06`	`*** join/#asterisk ghenry (n=ghenry@mail.suretecsystems.com)`
`17:45.33`	`*** join/#asterisk izaak (n=izaak@modemcable097.151-202-24.mc.videotron.ca)`
`17:47.34`	`*** join/#asterisk shinux__ (n=shinux@80.89.187.131)`
`17:48.49`	`*** join/#asterisk stuq (n=Stuart@74-32-29-24.dsl1.mdl.ny.frontiernet.net)`
`17:50.01`	`*** join/#asterisk hoobastoob1 (n=ckwall@c-71-195-199-149.hsd1.ut.comcast.net)`
`17:50.54`	`*** join/#asterisk ucfMethod (i=ucfMetho@c2.efb7d1.client.atlantech.net)`
`17:51.26`	`hoobastoob1`	`i have added an incoming iax2 connection from nufone. the problem i am having is that it does not play a ring to the caller. I added the r option to the dial command, and still nothing. is this correct?`
`17:51.27`	`hoobastoob1`	`exten => s,n,Dial(Zap/1\|20\|r)`
`17:53.32`	`*** join/#asterisk asdx (n=diego@200.61.236.33)`
`17:57.04`	`hoobastoob1`	`it works when i call from zap, even without the r options, but if i call from iax2 the caller hears no ringing`
`17:57.30`	`izaak`	`any recommendations for orig./term. providers? we orig. from montreal and call within canada mostly. we currently use les.net but we're getting sick of quality issues.`
`17:57.51`	`rob0`	`useless.net? SCNR`
`17:59.05`	`[TK]D-Fender`	`izaak: www.unlimitel.ca`
`18:00.05`	`*** join/#asterisk twisted[asteria] (n=twisted@24.214.206.254)`
`18:00.08`	`*** mode/#asterisk [+o twisted[asteria]] by ChanServ`
`18:01.11`	`hoobastoob1`	`anyone know why my callers are not getting ringing when they call my iax2 number even with option r on the dial line?`
`18:01.27`	`izaak`	`[TK]D-Fender: thanks, prices look good. do you use them? do you use g.711, and is the quality always good within north america?`
`18:02.04`	`[TK]D-Fender`	`izaak: Not personally, but several of my customer swear by them. They've used all sorts of other providers and have dumped them all for Unlimitel.`
`18:02.26`	`[TK]D-Fender`	`izaak: Also great people to actually work with (I have spoken with them)`
`18:02.28`	`izaak`	`[TK]D-Fender: with my current provider the price is about the same, but i get occasional echos and sometimes my calls sound like g.729 even though i only ever use g.711`
`18:03.00`	`Sauron	`Fender: Did you see my last pastebin, with the sip debug?`
`18:03.01`	`izaak`	`k, i guess it's worth opening up a test account!`
`18:03.07`	`[TK]D-Fender`	`izaak: As I said, no extensive personal experience, but I've done a few calls over them a 2 clients are running their business' off of them. Happy as a clam.`
`18:03.10`	`Sauron	`http://pastebin.ca/293490`
`18:03.19`	`Sauron	`How much fun it is to read through SIP debugging`
`18:03.30`	`*** join/#asterisk Mannetjie (n=Mannetji@vc-196-207-32-235.3g.vodacom.co.za)`
`18:03.35`	`[TK]D-Fender`	`Sauron: Yes, I'm not 100% sure what to make of it, but I'd suggest restricting your codec choice first tot he 1 you really want to use.
`18:03.35`	`Mannetjie`	`hi all`
`18:03.37`	`ucfMethod`	`howdy`
`18:03.49`	`Sauron	`Hm.`
`18:03.51`	`Mannetjie`	`I have a question`
`18:05.02`	`*** join/#asterisk leoalves (n=chatzill@200.175.180.56.static.gvt.net.br)`
`18:05.09`	`Mannetjie`	`I have a digital extention that comes from a pbx that I would like to plug into my asterisk pbx`
`18:05.20`	`Mannetjie`	`what card will work for that?`
`18:05.27`	`[TK]D-Fender`	`Mannetjie: What kind of "digital connection"?`
`18:05.35`	`Sauron	`Hm, okay.`
`18:05.49`	`Mannetjie`	`it's a siemens digital pbx that the line is coming from`
`18:05.52`	`ucfMethod`	`anyone know is * can send mp3 files for voicemails instead of wav/gsm`
`18:06.19`	`Mannetjie`	`ucfMethod, I read somewhere in the docs that you can`
`18:06.29`	`Mannetjie`	`or was is call waiting?`
`18:06.30`	`Qwell[]`	`ucfMethod: asterisk can't transcode to mp3, so you'd have to use an external app`
`18:06.38`	`ucfMethod`	`thats what i thought`
`18:06.48`	`Sauron	`Hum, yaaay`
`18:06.55`	`Sauron	`sounds like ass though`
`18:07.02`	`ucfMethod`	`Qwell: trying to figure out a way for our BB users to listen to the voicemail from the email they receive`
`18:07.09`	`Sauron	`Fender: setting my side to only allow g726 worked`
`18:07.33`	`[TK]D-Fender`	`MP3? What a waste....`
`18:07.41`	`Mannetjie`	`[TK]D-Fender, it's an extention from an siemens digital pbx`
`18:07.48`	`[TK]D-Fender`	`ucfMethod: WAV <-`
`18:07.49`	`Qwell[]`	`[TK]D-Fender: agreed`
`18:08.04`	`Sauron	`Other than ulaw/alaw, which is better between ilbc and g726?`
`18:08.23`	`[TK]D-Fender`	`Mannetjie: That does not tell us what format that signal is in. Thats like saying my car runs on LIQUID. BTW, did I forget to mention its DEISEL?`
`18:08.25`	`mercestes`	`Sauron: g729.
`18:08.27`	`ucfMethod`	`[TK]D-Fender: but for some reason, the BB wont play the wav attachment... doesnt even give the menu option "Open Attachment"`
`18:08.30`	`*** part/#asterisk prasoum (n=h2pc@72.93.112.212)`
`18:08.45`	`Sauron	`mercestes: Wrong answer. :p`
`18:08.52`	`[TK]D-Fender`	`ucfMethod: Sounds like a browser/BB issue`
`18:09.01`	`mercestes`	`I before E, except in the word Deisel. no...wait...even in the word diesel.`
`18:09.03`	`ucfMethod`	`[TK]D-Fender: terrific`
`18:09.09`	`Mannetjie`	`hhhhmmmmm, ok thank [TK]D-Fender I will have to do more reading on that pbx then, will get back to you on it`
`18:09.11`	`Mannetjie`	`thanks`
`18:09.12`	`ucfMethod`	`[TK]D-Fender: why is that nothing just works`
`18:09.26`	`Sauron	`Hmm`
`18:09.26`	`ucfMethod`	`[TK]D-Fender: ha .. i guess id be out of a job then ;-)`
`18:09.30`	`Sauron	`ulaw sounds awfully nice`
`18:09.33`	`mercestes`	`Sauron: aww...I always liked G729.
`18:09.44`	`[TK]D-Fender`	`ucfMethod: God hates us, and rain is his way of pissing`
`18:09.46`	`Sauron	`I don't have that compiled/running. :p`
`18:09.50`	`mercestes`	`Mannetjie: I can save you some time......`
`18:09.54`	`Sauron	`although BV does support 729`
`18:10.11`	`Mannetjie`	`please mercestes`
`18:10.17`	`*** join/#asterisk tzafrir_ (n=tzafrir@bzq-82-81-158-44.red.bezeqint.net)`
`18:10.23`	`mercestes`	`Mannetjie: the answer is...you probably can't. You would have to plug into the PBX as a line/trunk and use a FXS/FXO card to trunk over to the PBX>`
`18:10.28`	`mercestes`	`and leave the PBX to handle it's own phones.`
`18:10.53`	`Mannetjie`	`mercestes, that does not help much`
`18:11.01`	`mercestes`	`Mannetjie: Really?`
`18:11.04`	`Mannetjie`	`true`
`18:11.29`	`Sauron	`Ugh, ilbc sounds crappy too`
`18:11.44`	`[TK]D-Fender`	`Sauron: If you can afford it : ULAW
`18:11.55`	`Mannetjie`	`mercestes, my setup is a bit more complicated, but thanks for the help though`
`18:11.59`	`Sauron	`I can`
`18:12.05`	`Sauron	`and I'll prolly do that`
`18:12.05`	`[TK]D-Fender`	`Sauron: iLBC = Domo Arigato (almost as bad as LPC10)
`18:12.11`	`mercestes`	`Good luck then..:)`
`18:12.26`	`Sauron	`Fender: I dunno, g726 was almost as bad as ilbc`
`18:12.43`	`Mannetjie`	`mercestes, I need that extention to be run through asterisk to a ip phone 40km away`
`18:13.02`	`[TK]D-Fender`	`Sauron: Shouldn't have been. G726-32 is 1/2 G.711 and should be better than everything but G.711
`18:13.12`	`file`	`[TK]D-Fender: !`
`18:13.15`	`Mannetjie`	`as their pbx do not have voip functionality`
`18:13.20`	`[TK]D-Fender`	`file: ! !`
`18:13.32`	`Sauron	`Fender: well, this is the list that BV supports: (ulaw\|alaw\|g726\|g729\|ilbc)`
`18:13.34`	`Mannetjie`	`but my problem is that it's a digital pbx`
`18:13.50`	`Sauron	`I tested 726 and ilbc (I don't have 729)`
`18:14.04`	`Sauron	`And they made me cry :)`
`18:14.07`	`mercestes`	`Mannetjie: So? It has to plug into some form of interface, aye??`
`18:14.10`	`*** join/#asterisk heartones (n=Loveocea@84.36.11.187)`
`18:14.11`	`[TK]D-Fender`	`Sauron: I know G.726 has gone under some sort of changes lately, so G.711u/a us a safew bet
`18:14.11`	`Mannetjie`	`and I dont know what card to use in the situation`
`18:14.42`	`[TK]D-Fender`	`Mannetjie: And you can't know which card (if any) until you know what format that signal is in./`
`18:14.53`	`Mannetjie`	`true [TK]D-Fender`
`18:14.59`	`Sauron	`yep`
`18:15.09`	`[TK]D-Fender`	`Mannetjie: So go crack a few eggs, and we'll see about your chikens later...`
`18:15.14`	`Sauron	`hum`
`18:15.21`	`Mannetjie`	`thanks [TK]D-Fender`
`18:15.56`	`mercestes`	`assuming they're chickens. If they're alligators your on your own.`
`18:15.57`	`Mannetjie`	`lol @ mercestes`
`18:16.24`	`mercestes`	`I still say you have A: A PRI, B: a T1 demuxed into an analog channel bank, or C: a bunch of analog lines.`
`18:16.26`	`Sauron	`booya`
`18:16.27`	`Sauron	`It worksn ow`
`18:16.30`	`Sauron	`works now, even`
`18:16.35`	`Sauron	`Fender: What a mess.`
`18:17.08`	`[TK]D-Fender`	`Sauron: I'm currently betting its G.726 issues that blovked you up.
`18:17.27`	`mercestes`	`and you will need A: A t1 interface card by Digium/Sangoma, B: a FXO/FXS card or C: an FXO/FXS card.`
`18:17.38`	`Sauron	`Hum, dunno.`
`18:17.40`	`[TK]D-Fender`	`mercestes: Or some God-forsaken proprietary format, or maybe just a hole a cable fits into.... who knows!`
`18:17.46`	`Sauron	`It might have been "pick a codec" issues`
`18:17.53`	`Sauron	`Because I can force g726 and it works fine`
`18:17.55`	`Sauron	`but sounds crap`
`18:18.05`	`mercestes`	`[TK]D-Fender: I think they should use a bunch of ATA's daisy chained together for Voip translation. nods sagely`
`18:18.12`	`[TK]D-Fender`	`Sauron: Well we found a way that works. Hooray
`18:18.15`	`Mannetjie`	`mercestes, I will have to find out what exactly the pbx uses as [TK]D-Fender said before I can go any further`
`18:18.29`	`mercestes`	`Mannetjie: I agree.`
`18:18.29`	`Sauron	`I'm looking through the log you looked at to see what codec it had negotiated when it caused borkage`
`18:18.31`	`[TK]D-Fender`	`Mannetjie: Correct.`
`18:19.04`	`*** join/#asterisk gr0mit_home (n=Tim@extrt.txrx.org.uk)`
`18:19.38`	`Sauron	`Hum`
`18:19.51`	`Sauron	`and why are the new voicemail options not documented on voip-info.org? :(`
`18:20.07`	`Sauron	`<PROTECTED>`
`18:20.08`	`Qwell[]`	`Sauron: because nobody has added them. feel free
`18:20.20`	`Qwell[]`	`Sauron: that was deprecated in 1.2 iirc
`18:20.22`	`Sauron	`Qwell: So where do I find the real documentation? :)`
`18:20.32`	`Qwell[]`	`~rtfsc`
`18:20.34`	`Qwell[]`	`:D`
`18:20.45`	`Qwell[]`	`I am very glad that jbot didn't answer that, heh`
`18:21.37`	`[TK]D-Fender`	`jbot: rtfsc is Read the ^%#@ing source code`
`18:21.38`	`jbot`	`[TK]D-Fender: okay`
`18:21.46`	`[TK]D-Fender`	`:O`
`18:22.15`	`[TK]D-Fender`	`Armed and dangerous!`
`18:22.36`	`Sauron	`eyeroll`
`18:22.44`	`Sauron	`Qwell: That's shitty. :p`
`18:22.54`	`Qwell[]`	`[TK]D-Fender: ;)`
`18:23.48`	`[TK]D-Fender`	`I'm thinking we'll need a gang of community members to do a mass-WIKI review and split according to version.`
`18:23.49`	`*** join/#asterisk anthonyl (i=Anthony@nat/digium/x-fdb6532dab9b9746)`
`18:24.15`	`Techie-Micheal`	`Sauron: Still having problems?
`18:24.17`	`Qwell[]`	`[TK]D-Fender: sounds like you just volunteered`
`18:24.23`	`Sauron	`Techie: Nope.`
`18:24.29`	`Techie-Micheal`	`Ah, good. :)`
`18:24.33`	`[TK]D-Fender`	`Qwell : I'm fully willing to be part of the effort`
`18:24.53`	`Sauron	`Hm.`
`18:25.11`	`Sauron	`VoiceMail($ARG,[ub])`
`18:25.24`	`Qwell[]`	`Sauron: ${ARG}
`18:25.33`	`Techie-Micheal`	`Incidentally, has anybody gotten users.conf to work? I'm probably doing something wrong, but I get a lovely 404. Doesn't really matter, I've gone back to the individual config files, just curious.`
`18:25.34`	`Qwell[]`	`and either u or b (or none)`
`18:25.59`	`Sauron	`I know`
`18:26.01`	`Sauron	`whatever :p`
`18:26.01`	`[TK]D-Fender`	`Qwell[]: Forgot "s", no?`
`18:26.30`	`Qwell[]`	`umm, yeah`
`18:26.35`	`Qwell[]`	`sub/bus`
`18:27.04`	`mercestes`	`Ooo? Can I help?`
`18:27.05`	`Mannetjie`	`bye all`
`18:29.10`	`Sauron	`Yaay`
`18:29.18`	`Sauron	`Now to test outbound calls when I get home`
`18:29.32`	`hoobastoob1`	`is there a way to call into my number and when it goes to voicemail issue a key on the phone to log into my voicemail, rather than having to dial a separate number to access voicemailmain?`
`18:29.40`	`hoobastoob1`	`"#" for example?`
`18:30.14`	`Sauron	`You could have a single-digit log you in, I'd imagine`
`18:30.50`	`Sauron	`http://www.voip-info.org/wiki-Asterisk+cmd+VoiceMailMain`
`18:30.51`	`Sauron	`see the first 2 paragraphs`
`18:31.32`	`[TK]D-Fender`	`hoobastoob1: Read up on the "a" standard extension.`
`18:31.34`	`[TK]D-Fender`	`~book`
`18:31.37`	`jbot`	`i heard book is a book called Asterisk: The Future of Telephony which is found at http://www.asteriskdocs.org/modules/tinycontent/index.php?id=11`
`18:31.38`	`hoobastoob1`	`just found it... thanks`
`18:31.50`	`Sauron	`exten => #,1,VoiceMailMain(s${EXTEN})`
`18:31.59`	`in-pt`	`hi all`
`18:32.20`	`in-pt`	`is there any way in asterisk to know which sip extension is on call in real time`
`18:32.40`	`[TK]D-Fender`	`Sauron: Lol... NOPE.
`18:33.02`	`Sauron	`It should work, according to the (possibly outdated) docs.`
`18:33.14`	`[TK]D-Fender`	`Sauron: way off base... think about that line. Wrong on so many counts.
`18:33.59`	`Sauron	`Yawn.`
`18:34.08`	`Sauron	`then why doesn't your highness tell me what's wrong with it. :p`
`18:34.27`	`[TK]D-Fender`	`Sauron: What effectively gets called every time on that line is "VoiceMailMain(s#)", since the exten is "#".
`18:34.37`	`Sauron	`Hrm.`
`18:34.57`	`[TK]D-Fender`	`Sauron: Also that is an exten you'd have to actually dial, not something that would ever be referenced by the voicemail app.
`18:34.58`	`Sauron	`Yah, I meant ${CALLERID}, or whatever`
`18:35.08`	`*** join/#asterisk asdx_ (n=diego@200.61.236.33)`
`18:35.09`	`*** join/#asterisk EmleyMoor (i=ejabberd@hallam.tinsleyviaduct.com)`
`18:35.19`	`[TK]D-Fender`	`Sauron: the altter is the #1 killer :)
`18:35.22`	`Sauron	`It's early and I got crappy sleep last night`
`18:35.22`	`[TK]D-Fender`	`latter*`
`18:35.35`	`[TK]D-Fender`	`Sauron: Go caffeinate!
`18:35.42`	`Sauron	`hm.`
`18:35.47`	`Sauron	`I didn't read all of his question`
`18:35.53`	`Sauron	`indeed, a is the way to go`
`18:36.10`	`EmleyMoor`	`I can't get dring detect to work yet but think I have found another way round my "Ringback" problem...`
`18:36.28`	`Sauron	`Fender: I don't do caffeine. It's overrated.`
`18:37.12`	`*** join/#asterisk Cyon (n=cyon@216.179.31.170)`
`18:37.32`	`*** part/#asterisk hoobastoob1 (n=ckwall@c-71-195-199-149.hsd1.ut.comcast.net)`
`18:38.26`	`EmleyMoor`	`Will a GotoIf($["${CALLERID(name)}"="RINGBACK"]? work if that's what the incoming PSTN line appears to present in my cdr?`
`18:38.40`	`EmleyMoor`	`(or might I need more quotes?)`
`18:39.08`	`[TK]D-Fender`	`EmleyMoor: Looks about right`
`18:39.42`	`*** join/#asterisk TimQ (n=tim@bas3-toronto01-1177779752.dsl.bell.ca)`
`18:39.47`	`*** join/#asterisk CrashHD (i=CrashHD@c-67-182-167-222.hsd1.ca.comcast.net)`
`18:40.43`	`*** join/#asterisk asdx__ (n=diego@200.61.236.33)`
`18:41.50`	`*** join/#asterisk izaak (n=izaak@modemcable097.151-202-24.mc.videotron.ca)`
`18:41.59`	`TimQ`	`Anyone: Problem with outbound pstn - log file at http://cpp.sourceforge.net/?show=26761`
`18:42.17`	`isladelobos`	`know a good man to configure an X100P IVR ?`
`18:42.35`	`TimQ`	`chan_zap.c: Exception on 13, channel 3`
`18:42.39`	`DrkShdw`	`did someone just use "good" and "x100p" in the same sentance? :)`
`18:42.45`	`Sauron	`has anyone used the hint priority at all?`
`18:42.50`	`isladelobos`	`jeje`
`18:43.10`	`isladelobos`	`my first card`
`18:44.20`	`mercestes`	`Sauron: yes...why?
`18:44.25`	`mercestes`	`whose asking?`
`18:45.15`	`Sauron	`Just trying to figure out what it's useful for`
`18:45.18`	`Sauron	`I read the wiki page`
`18:45.22`	`[TK]D-Fender`	`TimQ: I'd double-check your interface setup. And what is the actual problem?`
`18:45.27`	`mercestes`	`Sauron: It's useful for buddywatch.
`18:45.46`	`*** join/#asterisk asdx (n=diego@200.61.236.33)`
`18:45.46`	`[TK]D-Fender`	`Sauron: For pretty lights to tell you who's on the phone
`18:45.47`	`TimQ`	`Problem is that when I dial out it rings once then deadair.`
`18:45.52`	`TimQ`	`on pstn only.`
`18:46.06`	`[TK]D-Fender`	`TimQ: What card? And we'd have to see its configs`
`18:46.47`	`*** join/#asterisk dimas (n=ds@81.18.135.125)`
`18:46.57`	`*** join/#asterisk posixisposi (n=andy@user-0c93jo3.cable.mindspring.com)`
`18:47.11`	`TimQ`	`TDM12B`
`18:47.14`	`*** join/#asterisk mega (n=mega@217.201.78.6)`
`18:47.30`	`ucfMethod`	`anyone having issues with Polycom 501s and the latest sip application 2.0.3 where the phones buttons wont work , like they are frozen for a few seconds, then magically start working again`
`18:48.24`	`TimQ`	`You want zapata.conf ? or what configs?`
`18:48.39`	`robl^`	`is there a way to rotate the cdr logs in 1.4? similar to "logger rotate" for the other logs`
`18:48.49`	`[TK]D-Fender`	`TimQ: zaptel & zapata (the useful parts since I know you're running FreePBX).`
`18:49.05`	`EmleyMoor`	`If I wasn't losing my voice I'd try out that bit of config I've just written`
`18:49.28`	`pifiu`	`has anyone played with call parking and a set of polycoms with 1.4?`
`18:50.57`	`*** join/#asterisk sigmounte (n=sigmount@www.sighq.net)`
`18:51.01`	`TimQ`	`http://cpp.sourceforge.net/?show=26765`
`18:51.46`	`*** join/#asterisk asdx__ (n=diego@200.61.236.33)`
`18:53.23`	`*** part/#asterisk Techie-Micheal (n=Techie-M@phpbb/support/techie-micheal)`
`18:54.18`	`[TK]D-Fender`	`TimQ: Missing the imports included files...`
`18:54.36`	`TimQ`	`It was working before the holidays. Perhaps too much eggnogg? Didn't touch it tho.`
`18:54.48`	`*** join/#asterisk obnauticus (n=aao_pwne@c-24-21-116-29.hsd1.mn.comcast.net)`
`18:56.32`	`*** join/#asterisk asdx_ (n=diego@200.61.236.33)`
`18:58.31`	`*** join/#asterisk spader3d (n=spader3d@198.93.180.4)`
`18:59.34`	`TimQ`	`sorry - http://cpp.sourceforge.net/?show=26766`
`19:00.42`	`[TK]D-Fender`	`TimQ: Ok, Dunno... looks pretty legit`
`19:00.50`	`[TK]D-Fender`	`TimQ: Tried rebooting the system?`
`19:00.54`	`TimQ`	`yes`
`19:02.01`	`*** join/#asterisk luchshiy (n=anonymou@d212-53-104-193.cust.tele2.ch)`
`19:05.12`	`*** join/#asterisk Katty (n=Katty@adsl-70-238-150-181.dsl.stlsmo.sbcglobal.net)`
`19:05.14`	`Katty`	`allo.`
`19:06.21`	`[TK]D-Fender`	`Katty: Mew.`
`19:06.37`	`*** join/#asterisk sbingner (n=sam@adsl-699.flex.com)`
`19:06.54`	`*** join/#asterisk asdx (n=diego@200.61.236.33)`
`19:06.58`	`*** join/#asterisk luke-jr_work (n=luke-jr@fl-71-53-155-1.dhcp.embarqhsd.net)`
`19:07.34`	`mercestes`	`I love you Katty! ;D`
`19:07.40`	`file`	`Kattttty`
`19:08.43`	`*** join/#asterisk asdx__ (n=diego@200.61.236.33)`
`19:08.52`	`*** join/#asterisk _007 (n=brian@bhlkwihed01-lo0-pool1-a165.bhlkwi.tds.net)`
`19:10.46`	`Katty`	`file: fillllllllleeeee!!!`
`19:11.24`	`[TK]D-Fender`	`"The quality of Katty's mercy... requires a strainer" ;)`
`19:11.52`	`Katty`	`:P`
`19:11.59`	`Katty`	`[TK]D-Fender: i'm doing something shiny and new today!`
`19:12.01`	`mercestes`	`aw....and she totally ignores me.`
`19:12.18`	`Katty`	`mercestes: allo (=`
`19:12.54`	`mercestes`	`Hi, katty...:)`
`19:13.10`	`Katty`	`i'm trying to figure out how to make asterisk dump it's loggery into sql.`
`19:13.29`	`*** join/#asterisk dasenjo (n=dasenjo@208.195.215.125)`
`19:14.28`	`*** join/#asterisk andresmujica (n=AndresMu@190.24.70.227)`
`19:14.37`	`Katty`	`searching on voipinfo isn't helping :<`
`19:15.24`	`in-pt`	`anyone knows what does ANSWER do with the dialstatus.`
`19:15.34`	`mercestes`	`isn't hte asterisk loggery nonstandard data?`
`19:15.58`	`mercestes`	`It isn't uniformly formatted where you have date/time, code, description......is it?`
`19:16.48`	`Katty`	`mew?`
`19:16.52`	`Katty`	`there's a module for sql.`
`19:16.55`	`Katty`	`i just dunno how to use it.`
`19:17.08`	`mercestes`	`oh.`
`19:17.22`	`mercestes`	`why do ppl insist on using SQL as an over-glorified text editor??`
`19:17.51`	`Katty`	`i just have some sales reps that need to do queries (=`
`19:17.56`	`in-pt`	`mercestes: any clue about my problem ...i wants to know which sip extension is connected in real time`
`19:18.03`	`Katty`	`i figured dumping it into our preexisting sql server would do the trick.`
`19:18.07`	`mercestes`	`in-pt: show channels and text parse it.`
`19:18.10`	`Katty`	`[TK]D-Fender: what do you think?`
`19:18.14`	`mercestes`	`in-pt: check out hints too.`
`19:18.14`	`in-pt`	`can that be done with dialstatus`
`19:18.51`	`[TK]D-Fender`	`Katty: I think Dick Cheney should have been the one in front of the barrel.`
`19:18.56`	`in-pt`	`i want to route calls on the basis of dialstatus`
`19:18.56`	`mercestes`	`in-pt: I don't thinks o.`
`19:19.03`	`Katty`	`[TK]D-Fender: i agree.`
`19:19.19`	`Katty`	`[TK]D-Fender: is making asterisk log to sql very difficult?`
`19:19.25`	`[TK]D-Fender`	`Katty: Dunno... * logs don't typically mean squat to me, so I guess it depends on your neeeds`
`19:19.30`	`mercestes`	`in-pt: ok, you can use s-BUSY, s-UNAVAIL, s-CONGEST. I don' thtink s-ANSWERED will help much because it hangs`
`19:19.32`	`in-pt`	`mercestes: i didn't understands you`
`19:19.35`	`[TK]D-Fender`	`Katty: Never tried`
`19:19.41`	`Katty`	`[TK]D-Fender: mkay.`
`19:19.52`	`in-pt`	`i needs s-ANSWERED actually`
`19:20.00`	`in-pt`	`is there any other way to simulate that`
`19:20.02`	`xheliox`	`Katty: Not difficult at all.`
`19:20.39`	`Katty`	`xheliox: really?`
`19:20.57`	`*** join/#asterisk to1 (n=tom@ip-66-235-250-60.sterlingnetwork.net)`
`19:21.04`	`Sauron	`Katty: Mew`
`19:21.08`	`xheliox`	`heh - I'm sorta coming into this conversation late.`
`19:21.15`	`xheliox`	`You want to do what exactly?`
`19:21.24`	`Katty`	`Sauron: mew.
`19:21.25`	`[TK]D-Fender`	`in-pt: "show application dial" and lookup the "h" standard extension in the BOOK`
`19:21.26`	`[TK]D-Fender`	`~book`
`19:21.28`	`jbot`	`book is, like, a book called Asterisk: The Future of Telephony which is found at http://www.asteriskdocs.org/modules/tinycontent/index.php?id=11`
`19:21.39`	`Katty`	`xheliox: rather than dumping it all into master.csv, i want to dump it into a sql database on another machine.`
`19:21.49`	`xheliox`	`Katty: Simple as pie.`
`19:21.54`	`Katty`	`xheliox: i like pie.`
`19:22.00`	`[TK]D-Fender`	`.....`
`19:22.03`	`xheliox`	`Katty: Depends on what kind.`
`19:22.03`	`rob0`	`mmmmmmmm pie`
`19:22.13`	`Katty`	`xheliox: if you could point me in the right direction, i'd be all giddy inside.`
`19:22.20`	`xheliox`	`Katty: I'd like some banana cream if you happen upon some.`
`19:22.30`	`Katty`	`xheliox: ooo banana cream is yummy.`
`19:22.37`	`xheliox`	`What kind of SQL server? MySQL? PostGre...?`
`19:23.00`	`rob0`	`sorry, just cream, no banana`
`19:23.04`	`xheliox`	`mmm, tasty face pie`
`19:23.10`	`Katty`	`it's sql server 2005`
`19:23.16`	`rob0`	`ugh`
`19:23.17`	`Katty`	`:<`
`19:23.23`	`xheliox`	`naw, it's not that awful, probably`
`19:23.32`	`Katty`	`that means it's gonna be bad sob`
`19:23.33`	`xheliox`	`you can use odbc, though I've never actually done it.`
`19:23.54`	`Cyon`	`Ewwwwwwwwwww`
`19:24.02`	`xheliox`	`Katty: Be careful, that stuff might make you very sick.`
`19:24.07`	`Katty`	`xheliox: teehee.`
`19:24.25`	`*** join/#asterisk A-Tuin (n=a-tuin@gw.ip.v4.me.uk)`
`19:24.53`	`Katty`	`xheliox: where should i start?`
`19:24.59`	`Katty`	`xheliox: a module..or something..`
`19:25.02`	`xheliox`	`http://www.voip-info.org/wiki/view/Asterisk+cdr+odbc`
`19:25.06`	`Cyon`	`Katty: By getting mysql. :)`
`19:25.14`	`Katty`	`xheliox: thank you (=`
`19:25.14`	`*** join/#asterisk jeffgus (n=jeffgus@greengables.zimage.com)`
`19:25.17`	`xheliox`	`This has info on connection to an MSSQL server..`
`19:25.18`	`*** join/#asterisk stuq_ (n=Stuart@74-32-29-24.dsl1.mdl.ny.frontiernet.net)`
`19:25.36`	`xheliox`	`But Cyon's suggestion is much more reasonable. :)`
`19:26.36`	`Katty`	`i'm sure it is.`
`19:27.41`	`*** join/#asterisk bkruse (i=bkruse@nat/digium/x-d861d62068247886)`
`19:27.51`	`in-pt`	`[TK]D-Fender: I didn't understands yoyr concern to look for extension h, as i read about h extension it allows the called party to hang up by sending the '*' DTMF digit`
`19:28.00`	`in-pt`	`how could i use that for my purpose`
`19:28.16`	`xheliox`	`in-pt: That's incorrect.`
`19:28.25`	`in-pt`	`instead i tried to use dialstatus with ANSWER flag but it just dont work`
`19:28.31`	`[TK]D-Fender`	`in-pt: I said thestandard EXTENSION "h", not the Dial parameter.`
`19:28.53`	`[TK]D-Fender`	`in-pt: And I was hoping you'd pay attention to the "g" Dial parameter in that other reference`
`19:29.53`	`*** join/#asterisk kamuix_ (i=kamuix@174.109.94.80.dsl.libello.mc)`
`19:30.37`	`*** join/#asterisk [hC] (n=hardcore@190.10.13.145)`
`19:30.42`	`*** join/#asterisk stuq (n=Stuart@74-32-29-24.dsl1.mdl.ny.frontiernet.net)`
`19:32.23`	`*** part/#asterisk to1 (n=tom@ip-66-235-250-60.sterlingnetwork.net)`
`19:34.46`	`mercestes`	`Katty: Oh, you want the CDR's in SQL...not the loggys.....ok...now it makes sense.`
`19:35.05`	`in-pt`	`[TK]D-Fender: but this standard extension will gets executed after a call has been finished`
`19:35.20`	`in-pt`	`how it could be usefull in finding the Answer dial status`
`19:35.36`	`mercestes`	`in-pt: Your going to see the same thing with s-ANSWERED.`
`19:35.41`	`in-pt`	`i am little confused..can you please specify a little more`
`19:36.07`	`[TK]D-Fender`	`in-pt: you need to read THE BOOK. You don't always leave app_dial in a place whewre you can read the status depending on WHO HUNG UP.`
`19:36.08`	`mercestes`	`in-pt: Why don't you try telling us what exactly your trying to do????`
`19:36.10`	`in-pt`	`s-ANSWERED don't exist and s-ANSWER not working`
`19:36.29`	`[TK]D-Fender`	`~book`
`19:36.31`	`jbot`	`rumour has it, book is a book called Asterisk: The Future of Telephony which is found at http://www.asteriskdocs.org/modules/tinycontent/index.php?id=11`
`19:37.53`	`Katty`	`mercestes: yesh.`
`19:37.56`	`in-pt`	`http://pastebin.ca/293626`
`19:38.00`	`Katty`	`mercestes: i'm confuzzulating, sorry.`
`19:38.08`	`in-pt`	`can you people have a look at tthe link plz`
`19:38.14`	`*** join/#asterisk andresmujica (n=AndresMu@190.24.104.25)`
`19:38.39`	`Katty`	`mercestes: i'm attempting to configure odbc :>`
`19:39.17`	`mercestes`	`Katty: yayness! I have cdr's into MySQL....mysql is easier.`
`19:39.43`	`mercestes`	`ODBC in *nix is mean.`
`19:39.44`	`bkruse`	`mercestes: nice`
`19:40.17`	`Katty`	`mercestes: yeah, but we don't have mssql.`
`19:40.30`	`mercestes`	`Good, because you want mysql anyways.`
`19:41.03`	`in-pt`	`mercestes: have you seen what i am trying to do i pasted that`
`19:41.55`	`*** join/#asterisk visba (i=user@89.sub-70-215-51.myvzw.com)`
`19:42.03`	`*** part/#asterisk visba (i=user@89.sub-70-215-51.myvzw.com)`
`19:44.04`	`[TK]D-Fender`	`in-pt: You have clearly not learned how priority jumping has changed with * 1.2 Go read everything over again.`
`19:44.50`	`mercestes`	`in-pt: I suggest hiring a consultant.`
`19:44.56`	`[TK]D-Fender`	`in-pt: And you have ignored my very direct tip to look specifically at the "g" Dial option.`
`19:48.05`	`Cinen`	`Is it possible to do a set on the exten variable to normalize dialing? For example exten => _1NXXNXXXXXX,1,Set(${EXTEN}=${EXTEN:1:10}). This does not work but I was wondering if there is another way to do it.`
`19:49.09`	`in-pt`	`<PROTECTED>`
`19:49.10`	`in-pt`	`<PROTECTED>`
`19:50.00`	`[TK]D-Fender`	`Cinen: You can't SET EXTEN directly.`
`19:50.16`	`[TK]D-Fender`	`Cinen: You can assign a variable based on it however`
`19:50.26`	`[TK]D-Fender`	`Cinen: and use that in your actual Dial statement`
`19:51.16`	`Cinen`	`yea I tried that but it means I must modify my diaplan alot`
`19:51.24`	`*** join/#asterisk anaya_ (n=anaya@mailboy.snapstream.com)`
`19:51.38`	`Cinen`	`What I would like to do is use this in a Macro or something then return to where it left so it can match only 10 digit numbers`
`19:51.45`	`sevard`	`I'm a consultant for hire.`
`19:51.50`	`johann8384`	`alamantia: you there?`
`19:52.08`	`anthonyl`	`yep`
`19:52.34`	`mercestes`	`Cinen: I thought that's what macros did by definition.`
`19:52.44`	`anthonyl`	`johann8384, i am alamantia`
`19:52.48`	`*** join/#asterisk [Airwolf] (n=airwolf@84.241.192.58)`
`19:52.51`	`johann8384`	`anthony1: oh lol ok`
`19:53.14`	`johann8384`	`anthony1: i went and fixed some if( for( while( stuff like that in the whole main folder.`
`19:53.24`	`Cinen`	`correct but macros want an s for the exten and if I goto macro with s then is messes up ${EXTEN}`
`19:53.26`	`Tili`	`how can i get SIP SRC ip?`
`19:53.28`	`johann8384`	`I put a third patch on 8679`
`19:53.51`	`*** join/#asterisk ToyMan (n=Stuart@74-32-29-24.dsl1.mdl.ny.frontiernet.net)`
`19:53.52`	`anthonyl`	`yep are you talking about the one for rtp.c's coding guidelines one or the patch for adding the manager events to the rtcp stuff?`
`19:53.58`	`anthonyl`	`i was sort of just looking at both.`
`19:54.02`	`johann8384`	`anthony1: yeah`
`19:54.36`	`mercestes`	`Cinen: Oh, I use a set(MyNumber=${EXTEN}) for storage.`
`19:54.41`	`johann8384`	`anthony1: i saw that there were many instances of that there, i'm going to go through and check for more "violations" and see what all I can fix`
`19:54.55`	`*** join/#asterisk sbingner (n=sam@adsl-699.flex.com)`
`19:55.23`	`anthonyl`	`i was thinking many you could just use the verbose or log scope. for the event. i really don't have a problem with addinga reporting scope`
`19:55.55`	`anthonyl`	`but, im just not sure if adding more scopes is the smartest idea ever, and would like to avoid confusion..`
`19:55.56`	`johann8384`	`anthony1: yeah I wasn't sure what would be right but a few people said they would like to add a few things for reporting purposes in the future`
`19:56.04`	`johann8384`	`anthony1: that is true also`
`19:56.37`	`anthonyl`	`it's just that a lot of other events would fall under a reporting scope as well`
`19:56.39`	`*** join/#asterisk mistral (n=mistral@jstevenson.plus.com)`
`19:56.52`	`[TK]D-Fender`	`Cinen: you pass parameters to macros. go read up again. And thats what I typically doa and advise. A single macro for doing the dirty work, and pattern matches to determin HOW the macro gets called`
`19:56.54`	`anthonyl`	`and if we just add it there could be a sort of "collision"-ish thing going on`
`19:57.48`	`johann8384`	`yes.`
`19:58.27`	`anthonyl`	`humm, would you have a problem with pinging the asterisk-dev list agian once more?`
`19:58.45`	`johann8384`	`nope, i'll do it right now`
`19:58.49`	`anthonyl`	`just so we can get the input of the rest of the community once more before we think about making changes like that`
`19:58.51`	`anthonyl`	`oh cool`
`20:01.19`	`isladelobos`	`know a good man to configure an X100P IVR ?`
`20:02.16`	`[TK]D-Fender`	`isladelobos: Many consultants around here, myself and sevard amonsgt undoubtably others`
`20:02.19`	`*** join/#asterisk stuq (n=Stuart@74-32-29-24.dsl1.mdl.ny.frontiernet.net)`
`20:02.40`	`isladelobos`	`translating....`
`20:03.12`	`variable_office`	`what atas have t.38 in them so i can start testing with fax over ip stuff? does the spa-1001?`
`20:03.29`	`isladelobos`	`sorry don't stand thats english`
`20:03.33`	`isladelobos`	`understand`
`20:04.52`	`[hC]`	`the new asterisk.org website looks terrible..`
`20:04.58`	`[hC]`	`compared ot the old one`
`20:05.18`	`mercestes`	`[TK]D-Fender: I think he means manual.`
`20:05.41`	`mercestes`	`...and he sounds like a bot.`
`20:05.47`	`mercestes`	`isladelobos: What's your native language?`
`20:05.56`	`isladelobos`	`spanish`
`20:06.14`	`isladelobos`	`no problem read english`
`20:06.18`	`mercestes`	`variable_office: I can save you some time. Don't fax over ATA.`
`20:06.24`	`isladelobos`	`but this is a chat english?`
`20:06.25`	`macTijn`	`yes problem write ? :)`
`20:06.31`	`mercestes`	`isladelobos: By "man" do you mean "person" or manual?`
`20:07.17`	`isladelobos`	`my chat english is little`
`20:07.28`	`isladelobos`	`i read a good english write`
`20:08.10`	`isladelobos`	`man manual`
`20:08.26`	`variable_office`	`mercestes then how can i fax?`
`20:08.35`	`mercestes`	`como es "man". Esta hombre o libro?`
`20:08.36`	`mercestes`	`:D`
`20:08.40`	`isladelobos`	`jeje`
`20:08.45`	`mercestes`	`the asterisk wiki`
`20:08.46`	`isladelobos`	`libro`
`20:08.50`	`isladelobos`	`man=manual`
`20:08.52`	`isladelobos`	`sorry`
`20:09.09`	`mercestes`	`http://www.voip-info.org/wiki-Asterisk`
`20:09.55`	`mercestes`	`In particular, http://www.voip-info.org/wiki-Asterisk+tips+IVR+menu`
`20:09.56`	`[TK]D-Fender`	`~book`
`20:10.00`	`jbot`	`well, book is a book called Asterisk: The Future of Telephony which is found at http://www.asteriskdocs.org/modules/tinycontent/index.php?id=11`
`20:11.00`	`variable_office`	`mercestes is that for me>`
`20:11.12`	`Sauron	`Fender loves to slap that bloody book around, doesn't he`
`20:11.26`	`mercestes`	`variable_office: no....you can use PRI, or Analog, or a multimode T1, or a mux/demux.`
`20:11.34`	`isladelobos`	`thanks mercestes`
`20:11.41`	`*** join/#asterisk effectiveape (n=effectiv@62.164.247.233)`
`20:11.59`	`*** join/#asterisk AstawerksdotCom (n=Astawerk@170.206.224.46)`
`20:12.02`	`mercestes`	`variable_office: I suggest against faxing via ATA's. It's problematic.`
`20:12.13`	`effectiveape`	`Can anyone give me a hand with my ivr?`
`20:12.33`	`[TK]D-Fender`	`Sauron: If only I could imbue it with true kinetic energy to convey the full "weight" of my inten :D
`20:12.47`	`mercestes`	`however, I believe the PAP2na has t38 passthrough, and the Sipura ....3000 something from memory.`
`20:13.10`	`effectiveape`	`Just having a problem in that i need it to fall through to answerphone. However it's just disconnecting`
`20:13.11`	`mercestes`	`variable_office: Google those two and double check tho, I have happily not dealt with ATA"s in some time.`
`20:13.15`	`Katty`	`mercestes: well i've given up, i think i'm just gonna use mysql.`
`20:13.38`	`mercestes`	`Katty: YAY! hugs You won't be disapponited.`
`20:14.14`	`variable_office`	`mercestes even with t38 faxing isnt reliable?`
`20:14.27`	`Katty`	`mercestes: my head hurts right now )=`
`20:14.38`	`Katty`	`mercestes: i'mma tackle it later, after my brain stops skwishing around.`
`20:14.51`	`Sauron	`Ugh`
`20:14.58`	`Sauron	`They want us to install a mysql database here`
`20:15.03`	`mercestes`	`Katty: Okies...I'll be here for you.`
`20:15.04`	`Sauron	`because shitty wordpress doesn't support pgsql`
`20:15.08`	`Katty`	`Sauron: i've never used mysql before...
`20:15.15`	`Sauron	`Sigh. I hate dumb end-users.`
`20:15.17`	`*** join/#asterisk Astawerksdotnet (n=doug@63.161.96.170)`
`20:15.23`	`mercestes`	`Katty: mysql is warm sweet sunshine happiness.`
`20:15.29`	`Katty`	`mercestes: like pie?`
`20:15.34`	`mercestes`	`variable_office: it's not the faxing that's unreliable. It's the ATAs.`
`20:15.38`	`effectiveape`	`i've setup a 't' extension but it doesn't seem to want to goto it. Just disconnects`
`20:15.53`	`*** join/#asterisk Mad_guy (n=austin@ip68-1-213-212.dl.dl.cox.net)`
`20:15.54`	`mercestes`	`Katty: OF course.....except....without the crust and the sprinkles. Mysql is just hte warm gooey filling.`
`20:15.56`	`variable_office`	`mercestes really? just the internal hardware sucks or what?`
`20:16.01`	`mercestes`	`Katty: It doesnt't even have hte pie tin.`
`20:16.10`	`Katty`	`mercestes: :>`
`20:16.12`	`*** join/#asterisk tarvoke (n=tarvoke@204.9.194.80)`
`20:16.24`	`mercestes`	`variable_office: Honestly, the load of carrying fax data tends to "burn them up." I just don't have a better way to describe it.`
`20:16.48`	`mercestes`	`variable_office: You put a phone on it....they work great. You dump a fax/modem/alarm on it...it dies in a month.`
`20:17.10`	`variable_office`	`what different ones have done this to you? are there any that work better than others/ that you prefer?`
`20:17.11`	`mercestes`	`you hook a bunch of them to a Nortel switch....total pain forever.`
`20:17.22`	`Katty`	`mercestes: mayhaps i'll bug you tomorrow about then.`
`20:17.46`	`mercestes`	`variable_office: Cisco 1860's, Linksys PAP2na, Sipura 3000something, Grandsuck Ata's.`
`20:17.52`	`mercestes`	`Katty: by all means..:)`
`20:18.10`	`*** join/#asterisk bkruse (i=bkruse@nat/digium/x-15cf679f0779bc93)`
`20:18.27`	`*** join/#asterisk NickDC (n=NickDC@CPE004010100002-CM000a739b73af.cpe.net.cable.rogers.com)`
`20:18.44`	`effectiveape`	`here is my ivr if anyone can help. http://pastebin.ca/293687`
`20:18.56`	`mercestes`	`variable_office: I've heard of descent success going Fax -> quintum -> data t1 -> Quintum -> PRI interface but...I haven't manage to study it for any length of time..and Quintum's require Quintum to configure......or a genius.`
`20:19.18`	`NickDC`	`has anyone ever configured an MP-104 FXO? i'm having problems with outgoing calls through trixbox 2.0. I think it's a route setting..?`
`20:19.28`	`*** join/#asterisk visba (n=dca[lapt@64.78.149.60)`
`20:19.37`	`*** part/#asterisk visba (n=dca[lapt@64.78.149.60)`
`20:19.49`	`mercestes`	`NickDC: Did you stop to read the topic before you disturbed my concentration???`
`20:20.10`	`*** join/#asterisk frod_ (n=chatzill@189.150.1.195)`
`20:20.14`	`variable_office`	`mercestes ah so none of them stand out as more reliable than the others?`
`20:20.38`	`*** join/#asterisk dtek (n=manuelrs@201.232.76.36)`
`20:20.43`	`mercestes`	`variable_office: I think the sipura's won the contest if I recall correctly. Cisco failed, I know that for sure.`
`20:20.47`	`*** join/#asterisk mega (n=mega@217.201.75.134)`
`20:21.03`	`Katty`	`mercestes: yay hug`
`20:21.06`	`mercestes`	`Grandstream.......I used grandstream's to prop open doors and as slip guards in my shower.`
`20:21.11`	`frod_`	`is asterisk 1.4 capable of t38 ??`
`20:21.11`	`mercestes`	`Katty: :)`
`20:21.20`	`effectiveape`	`i'm sure it's pretty simple ;)`
`20:21.26`	`[TK]D-Fender`	`frod_: in pass-through mode only.`
`20:21.32`	`*** join/#asterisk yassine (n=nnnnnnnn@xdsl-87-78-114-193.netcologne.de)`
`20:21.38`	`variable_office`	`mercestes grandstream sucks that bad huh?`
`20:21.39`	`mercestes`	`variable_office: I think the LInksys did ok but the sipura's won...which....are owned by Cisco now anyways and are marketted under the linksys name so...w/e.`
`20:21.55`	`mercestes`	`variable_office: Oh yea, they don't even hold my door open or protect me from slippage.`
`20:22.02`	`mercestes`	`My dog won't even chew on it.`
`20:22.06`	`*** join/#asterisk AstawerksdotCom (n=Astawerk@170.206.224.46)`
`20:22.08`	`variable_office`	`lol`
`20:22.43`	`variable_office`	`ever heard of gnet? it says it is capable of t38`
`20:22.45`	`NickDC`	`mercestes: the topic doesn't say anything about not asking questions in regards to FXOs which i'm using with asterisk..thought maybe someone went through that config before. sorry..`
`20:22.58`	`johann8384`	`we had several grandstreams die, some had to be power cycled periodically so we just took them back, threw them in a dumpster and replaced them with Sipura models at no charge`
`20:23.05`	`mercestes`	`NickDC: Did you say you were using Trixbox?`
`20:24.08`	`mercestes`	`variable_office: Never heard of them. YMMV. use at your own risk.`
`20:24.13`	`effectiveape`	`please- i'll send you a mincepie ;)`
`20:24.20`	`variable_office`	`johann8384 have you ever tried an ata made by Gnet? sipura seems to high mark then eh?`
`20:24.29`	`effectiveape`	`(although it might not make it in one piece)`
`20:25.09`	`johann8384`	`I like the sipura (now linksys) models quite well, I liked the phones too (for the price range). Nope, never tried a Gnet, if the manufacturer is listening send me one and i'll try it :-D`
`20:26.20`	`variable_office`	`same here, i never heard of it either sounds like nobody has`
`20:26.41`	`*** join/#asterisk ghenry (n=ghenry@mail.suretecsystems.com)`
`20:27.08`	`NickDC`	`oops yeah :S just think its more general and not so specific to a config in that system but in asterisk or on the FXO.`
`20:27.13`	`mercestes`	`that classifies it as a risk.`
`20:27.38`	`mercestes`	`Trixbox prison-dates your configs and makes troubleshooting/logs/debugging nearly impossible.`
`20:28.04`	`mercestes`	`I have not personally configured a MP-104 and I've never touched Trixbox.`
`20:28.26`	`*** join/#asterisk tsurk0 (n=tsurko@145-226.go.evo.bg)`
`20:28.39`	`johann8384`	`mercestes: you've never touched it but our obviously against it.. (not that i don't agree just noticing the irony ;))`
`20:28.48`	`mercestes`	`However, if a zap show channels shows up with no alarms I would summarily blame Trixbox, remove it, install pure asterisk, and proceed from there cursing the guy who installed Trixbox to begin with.`
`20:29.23`	`mercestes`	`johann8384: I have a similar no touch policy towards prostitutes..:P`
`20:29.58`	`johann8384`	`haha`
`20:30.11`	`NickDC`	`well. i went through the asterisk CLI to run a sip debug ip to my mp-104 and basically the mp-104 responds with a 404 not found with my destination (a pstn number) so i'm guessing it's some routing configuration needed on the fxo to send calls out the pstn line :/ so not related to trixbox.`
`20:31.08`	`NickDC`	`also trixbox is giving me installation issues on the machien i want to put it on anyways, so i'm thinking of trying asteriskNOW. maybe that's better`
`20:31.16`	`*** join/#asterisk BSDTech (n=RNeese@ppp-69-238-216-111.dsl.irvnca.pacbell.net)`
`20:31.25`	`*** join/#asterisk zapp-branigan (n=zapp-bra@81-202-145-20.user.ono.com)`
`20:31.25`	`*** join/#asterisk h0 (n=fakhir@unaffiliated/fakhir)`
`20:34.06`	`mercestes`	`NickDC: I suggest just plain asterisk so you can get the superior support found in this channel.`
`20:35.11`	`mercestes`	`and I'm not sure why a sip debug is useful on a mp-104. =/`
`20:36.06`	`mercestes`	`or why a 404 not found automatically means it's not a trixbox issue.`
`20:36.30`	`NickDC`	`the 404 not found is matched up in a syslog output of the mp-104`
`20:36.49`	`NickDC`	`on the box it actually says : cannot match endpoint number xxxxxxxx`
`20:36.54`	`*** join/#asterisk inv_Arp (i=junya@c-71-206-88-100.hsd1.fl.comcast.net)`
`20:37.02`	`NickDC`	`so i dont think trixbox is reporting bogus info`
`20:38.06`	`[TK]D-Fender`	`NickDC: Sounding like your MP is misconfigured`
`20:38.12`	`mercestes`	`so....you have trixbox -> mp-104 -> provider???`
`20:38.26`	`[TK]D-Fender`	`mercestes: MP-104 is an FXO analog interface`
`20:38.35`	`NickDC`	`tkd: yeah I am thinking so.`
`20:38.52`	`mercestes`	`Yea I was just looking that up.`
`20:39.55`	`NickDC`	`tdk : since there is serious lack of examples / documentation for it through audiocodes I've been reading forums post about people hooking it up with asterisk. just pretty hard`
`20:40.47`	`frod_`	`should i change my asterisk 1.2.14 to the 1.4.0 asterisk ??`
`20:40.51`	`*** join/#asterisk stephane_ (n=stephane@gw.sortilege.net)`
`20:41.05`	`[TK]D-Fender`	`NickDC: Going to be a hard search as what you're likely going to run into is * configs, not AudioCodes configs. Usually poeple get the gateway right and * wrong.`
`20:41.17`	`[TK]D-Fender`	`~wglwaot`
`20:41.30`	`*** join/#asterisk tr2x (n=alvar@89.22.98.129)`
`20:41.33`	`[TK]D-Fender`	`~wglwat`
`20:41.34`	`jbot`	`well, wglwat is well, good luck with all that`
`20:42.01`	`frod_`	`NickDC: i have lots of audiocodes working on * i can help you if you need ...`
`20:42.14`	`*** join/#asterisk Crescendo (n=martinda@adsl-072-151-080-148.sip.rmo.bellsouth.net)`
`20:43.28`	`NickDC`	`frod: great, well basically as I said. the FXO is probably mis configured.. it accepts incoming calls and sends it to the extension but when I dial out it says it has no endpoint match in syslog and * gets a 404 not found`
`20:44.04`	`frod_`	`i can send you a simple configuration ..`
`20:44.43`	`frod_`	`how many ports do u have ??`
`20:44.51`	`frod_`	`8 4 ??`
`20:44.54`	`NickDC`	`4`
`20:45.00`	`frod_`	`ok ..`
`20:45.07`	`frod_`	`just a sec ..`
`20:47.54`	`NickDC`	`i also have issues with regards to caller ID which you might know about as well.`
`20:49.37`	`NickDC`	`one sec.`
`20:50.03`	`*** join/#asterisk adker (n=chatzill@74-33-198-79.br1.glv.ny.frontiernet.net)`
`20:50.39`	`*** join/#asterisk NickDC (n=nickdc@CPE004010100002-CM000a739b73af.cpe.net.cable.rogers.com)`
`20:50.48`	`NickDC`	`back`
`20:51.04`	`frod`	`yes i had to register with the server ..`
`20:51.43`	`frod`	`NickDC: im senging you the file via DCC`
`20:51.52`	`NickDC`	`try again, mirc blocked it`
`20:51.59`	`frod`	`NickDC: i also have an issue with callerID`
`20:52.29`	`frod`	`sent again ..`
`20:52.40`	`NickDC`	`blah try again , damn mirc`
`20:52.52`	`NickDC`	`i thought i disabled the ini thing`
`20:53.01`	`frod`	`again ..`
`20:53.09`	`frod`	`do u want me to zip it ??`
`20:53.24`	`NickDC`	`connection failed :(`
`20:54.16`	`*** join/#asterisk jlq__ (n=jlq@210.213.199.90)`
`20:54.22`	`NickDC`	`i cant send you msgs, I have to register`
`20:54.27`	`*** join/#asterisk CunningPike (n=CunningP@S010600095b33697f.vc.shawcable.net)`
`20:54.32`	`frod`	`i snet you a private chat ..`
`20:55.33`	`frod`	`maybe i can post it somewhere or via e-mail if you need ..`
`20:56.42`	`NickDC`	`get my msgs?`
`20:57.47`	`frod`	`yes`
`21:01.08`	`Katty`	`file: i feel a splode coming on.`
`21:02.28`	`frod`	`should i change my asterisk 1.2.14 to the 1.4.0 asterisk ??`
`21:02.42`	`Qwell[]`	`frod: If you need the new features in 1.4, sure`
`21:03.05`	`frod`	`are all the conf files compatible with 1.2 ??`
`21:03.15`	`Qwell[]`	`no, you'll need to read UPGRADE.txt`
`21:03.22`	`frod`	`ok ..`
`21:03.23`	`Qwell[]`	`there are some things which will not work, or which need to be changed`
`21:03.32`	`frod`	`thanks ..`
`21:04.27`	`*** join/#asterisk Beighto (n=chatzill@64.160.113.130)`
`21:06.31`	`Beighto`	`Anybody have any recommendations where to buy phones?`
`21:07.23`	`frod`	`i buy at 888voip aastra phones and work great ..`
`21:07.35`	`[TK]D-Fender`	`Holy crap. 22" Dell widescreen LCD for $300 CAD .......`
`21:07.51`	`[TK]D-Fender`	`Beighto: Depends where you are`
`21:08.00`	`file`	`[TK]D-Fender: WHAT`
`21:08.11`	`Juggie`	`file you nub you didnt know? :)`
`21:08.14`	`Juggie`	`the sale ends today.`
`21:08.22`	`[TK]D-Fender`	`file: http://accessories.us.dell.com/sna/productdetail.aspx?c=ca&l=en&s=dhs&cs=CADHS1&sku=320-5205`
`21:08.31`	`file`	`well I'm not that interested, I have enough LCDs`
`21:08.40`	`file`	`just surprised`
`21:08.43`	`Qwell[]`	`or do you?`
`21:08.45`	`file`	`and dammit Windows`
`21:08.51`	`Qwell[]`	`can you really ever have enough?`
`21:08.53`	`Katty`	`file: share :>`
`21:09.22`	`file`	`I gave one to my step-dad and one to my brother in fact`
`21:10.11`	`[TK]D-Fender`	`Cinen: Should learn how to make macros.....`
`21:10.18`	`*** join/#asterisk tzafrir_laptop (n=tzafrir@bzq-82-81-158-44.red.bezeqint.net)`
`21:10.20`	`Beighto`	`[TK]D-Fender I meant on the internet as I have yet to find any good retail stores here in Sacramento, CA`
`21:10.29`	`Katty`	`[TK]D-Fender: macros & cheese.`
`21:10.37`	`Qwell[]`	`retail stores don't really carry voip stuff - besides vonage ATAs`
`21:10.40`	`[TK]D-Fender`	`Beighto: www.telephonydepot.com`
`21:10.42`	`Katty`	`[TK]D-Fender: i should start a geek cookbook.`
`21:10.42`	`Qwell[]`	`and now some packet8 stuff`
`21:10.55`	`Katty`	`fluffy packets and syrup`
`21:11.14`	`[TK]D-Fender`	`Cinen: Forget trying to PM me, you're not registered. And You simply don't know how they work, and EXTEN isn't everything.`
`21:11.18`	`Beighto`	`[TK]D-Fender: I'll check them out, thanks`
`21:11.52`	`[TK]D-Fender`	`Katty: The hard part is dicing up the geeks properly so they don't come out too tough :)`
`21:12.16`	`Katty`	`[TK]D-Fender: i find them often bitter :<`
`21:12.29`	`Katty`	`[TK]D-Fender: after much hugging, they're often sweeter.`
`21:12.54`	`Katty`	`[TK]D-Fender: and after squishing and pounding, they're like grapes....suitable to have dinner with.`
`21:13.44`	`iCEBrkr`	`I need a L.A. DID.`
`21:13.54`	`Katty`	`i wish i had some DIDs`
`21:13.57`	`Katty`	`DID soup.`
`21:13.59`	`Katty`	`and crackers.`
`21:14.11`	`iCEBrkr`	`My damn GF talks to her mother for frick'n hours.`
`21:14.21`	`Qwell[]`	`iCEBrkr: Then you need to get her a voip phone`
`21:14.23`	`Katty`	`iCEBrkr: i talk to my mom a lot.`
`21:14.23`	`iCEBrkr`	`Chews up the voicepulse minutes.`
`21:14.33`	`iCEBrkr`	`Qwell[]: I thought about that..`
`21:14.44`	`Qwell[]`	`it'll probably end up being cheaper - just get her a grandstream, heh`
`21:14.47`	`iCEBrkr`	`Qwell[]: I just setup an 'external' asterisk box.`
`21:14.57`	`iCEBrkr`	`Qwell[]: yeah, really.`
`21:15.46`	`iCEBrkr`	`Ehhh, nevermind`
`21:15.55`	`iCEBrkr`	`Mom still has dialup and I'm not about to deal with that shit`
`21:16.02`	`Qwell[]`	`ilbc baby!`
`21:16.06`	`Qwell[]`	`erm, lpc10`
`21:16.06`	`iCEBrkr`	`hahah`
`21:16.15`	`file`	`lpc10 is THE best codec`
`21:16.24`	`iCEBrkr`	`tehbest`
`21:16.26`	`Qwell[]`	`ooo`
`21:16.28`	`*** join/#asterisk TripleFFFF (n=TripleFF@145-27.mc.cite.net)`
`21:16.30`	`*** join/#asterisk Cinen (n=Cinen@208.70.20.33)`
`21:16.31`	`Qwell[]`	`I'm gonna make a wideband lpc10!`
`21:16.37`	`ucfMethod`	`anyone want to buy 3 Cisco 7960 series IP phones`
`21:16.48`	`ucfMethod`	`I am totally a Polycom office now`
`21:16.50`	`Qwell[]`	`ucfMethod: I'll give you $40 each :D`
`21:16.53`	`TripleFFFF`	`how can i have a sip entry have a different call port.. meaning connect to 5060 on proxy but will be on 5062 lets say`
`21:17.01`	`Nivex`	`ucfMethod: that depends on price, firmware, etc`
`21:17.17`	`Qwell[]`	`I could care less about firmware, condition (as long as they power on), etc`
`21:17.21`	`Qwell[]`	`$40, no questions asked`
`21:17.29`	`*** part/#asterisk Cinen (n=Cinen@208.70.20.33)`
`21:17.30`	`iCEBrkr`	`haha`
`21:17.39`	`*** join/#asterisk Cinen (n=Cinen@208.70.20.33)`
`21:18.12`	`Qwell[]`	`ucfMethod: Should I take that as a no?`
`21:18.27`	`*** join/#asterisk ToyMan (n=Stuart@user-12lcqia.cable.mindspring.com)`
`21:18.31`	`TripleFFFF`	`u know waht i mean ?`
`21:18.42`	`*** join/#asterisk fromm (n=fromm@fromm.omnis.com)`
`21:18.44`	`ucfMethod`	`how about 150.00 each`
`21:18.48`	`Qwell[]`	`meh`
`21:20.55`	`*** part/#asterisk BSDTech (n=RNeese@ppp-69-238-216-111.dsl.irvnca.pacbell.net)`
`21:24.23`	`*** join/#asterisk [Airwolf] (n=airwolf@attilla.nl)`
`21:26.05`	`*** join/#asterisk Teeli (n=tili@172.Red-88-0-147.dynamicIP.rima-tde.net)`
`21:29.55`	`*** join/#asterisk TonyM (n=TonyM@softins.claranet.co.uk)`
`21:31.10`	`*** join/#asterisk AsteriskAlbania (i=Asterisk@80.91.113.252)`
`21:31.17`	`*** part/#asterisk AsteriskAlbania (i=Asterisk@80.91.113.252)`
`21:31.46`	`*** join/#asterisk bkw__ (n=brian@ppp-70-128-100-224.dsl.tulsok.swbell.net)`
`21:31.57`	`*** join/#asterisk AsteriskAlbania (i=Asterisk@80.91.113.252)`
`21:32.20`	`*** part/#asterisk fx0 (n=fx0@cypher.punk.net)`
`21:32.33`	`AsteriskAlbania`	`Win 3000 EURO at the new online concurse : http://www.concorsocimarosa.it/`
`21:32.36`	`AsteriskAlbania`	`Win 3000 EURO at the new online concurse : http://www.concorsocimarosa.it/`
`21:32.40`	`AsteriskAlbania`	`Win 3000 EURO at the new online concurse : http://www.concorsocimarosa.it/`
`21:32.42`	`AsteriskAlbania`	`Win 3000 EURO at the new online concurse : http://www.concorsocimarosa.it/`
`21:32.46`	`AsteriskAlbania`	`Win 3000 EURO at the new online concurse : http://www.concorsocimarosa.it/`
`21:33.16`	`Rawplayer`	`wtf`
`21:33.27`	`Rawplayer`	`ban that mofo`
`21:34.02`	`iCEBrkr`	`huh`
`21:34.53`	`*** join/#asterisk ToyMan (n=Stuart@user-12lcqia.cable.mindspring.com)`
`21:36.12`	`*** join/#asterisk sigmounte (n=sigmount@www.sighq.net)`
`21:37.08`	`*** join/#asterisk mountainm2k (n=mountain@165.236.183.1)`
`21:42.54`	`ucfMethod`	`man i almost clicked that link ;-)`
`21:43.00`	`ucfMethod`	`i wanted to win 3000 EURO`
`21:43.07`	`sbingner`	`lol`
`21:43.10`	`ucfMethod`	`ha`
`21:43.19`	`*** join/#asterisk BSDTech (n=RNeese@ppp-69-238-216-111.dsl.irvnca.pacbell.net)`
`21:43.22`	`BSDTech`	`hey all`
`21:43.28`	`ucfMethod`	`sup`
`21:43.36`	`mountainm2k`	`Any examples of "ex-girlfriend" handy? Want to be able to easilly block telemarketers, junk faxes, etc`
`21:43.42`	`sbingner`	`I bet it's some porn site`
`21:43.45`	`BSDTech`	`just want to confirm a way to write a dynamic set of meet mee rooms`
`21:43.49`	`mountainm2k`	`Be nice if I could do it both system-wide and by extension`
`21:44.07`	`sbingner`	`mountainm2k, use astdb and callerid`
`21:44.09`	`*** join/#asterisk ManxPower (n=manxpowe@dpc67142183150.direcpc.com)`
`21:44.23`	`BSDTech`	`exten => _85XX,1, or exten => 85[1-5][0-9],1,`
`21:44.32`	`BSDTech`	`both work right`
`21:44.37`	`sbingner`	`should`
`21:44.43`	`BSDTech`	`or is there a new and better way`
`21:44.52`	`sbingner`	`but don't you still need the _?`
`21:45.01`	`mountainm2k`	`sbingner: Right -- make calls to DBGet in my dialplan... Any examples on how to do it "right"?`
`21:45.20`	`BSDTech`	`_85[1-5][0-9]`
`21:45.32`	`*** join/#asterisk Igbothom_III (n=Hilton@office.quarkit.com.au)`
`21:45.43`	`Corydon76-home`	`[0-9] is the same as X`
`21:46.05`	`Corydon76-home`	`and it takes slightly less cpu to process`
`21:46.07`	`*** join/#asterisk Teeli (n=tili@172.Red-88-0-147.dynamicIP.rima-tde.net)`
`21:46.25`	`*** join/#asterisk frod_ (n=chatzill@189.150.5.243)`
`21:47.32`	`Qwell[]`	`slightly less?`
`21:47.47`	`Corydon76-home`	`Yep`
`21:47.48`	`sbingner`	`mountainm2k, I use "exten => main,4,GotoIf(${DB(CIDS/${CALLERIDNUM}/gotostr)}?${DB(CIDS/${CALLERIDNUM}/gotostr)},1:)"`
`21:47.55`	`iCEBrkr`	`Those pennies sure add up!`
`21:47.56`	`sbingner`	`mountainm2k, but I don't know if that's 'right' ;)`
`21:47.57`	`Qwell[]`	`interesting - I would've assumed a bit more`
`21:48.10`	`Corydon76-home`	`X takes less`
`21:48.17`	`Qwell[]`	`ahh, ok`
`21:48.31`	`Corydon76-home`	`Sorry if I wasn't clear`
`21:48.33`	`Qwell[]`	`your wording was somewhat ambiguous :p`
`21:48.58`	`Corydon76-home`	`Yeah, well, I'm an ambiguous person.. :-P`
`21:49.26`	`iCEBrkr`	`and that's being nice!`
`21:51.46`	`*** join/#asterisk Tili (n=tili@172.Red-88-0-147.dynamicIP.rima-tde.net)`
`21:52.16`	`*** join/#asterisk hi365_ (n=hi365@bzq-167-158.dsl.bezeqint.net)`
`21:56.23`	`*** join/#asterisk ivanfm (n=ivanfm@c93481ec.virtua.com.br)`
`22:05.01`	`*** join/#asterisk linlin (n=will@c-71-194-70-13.hsd1.il.comcast.net)`
`22:08.37`	`CunningPike`	`Corydon76-home: Can you ban AsteriskAlbania (i=Asterisk@80.91.113.252) ?`
`22:08.53`	`Corydon76-home`	`What's it doing?`
`22:09.05`	`Qwell[]`	`CunningPike doesn't like Albanians, it seems`
`22:09.26`	`CunningPike`	`Corydon76-home: Spamming`
`22:09.32`	`Corydon76-home`	`It's not online`
`22:10.01`	`CunningPike`	`Corydon76-home: 'Win 3000 EURO at the new online concurse : http://www.concorsocimarosa.it/' about a gazzilion times`
`22:10.24`	`Qwell[]`	`/umode +g`
`22:10.30`	`Corydon76-home`	`CunningPike: it's not in the channel`
`22:10.35`	`*** join/#asterisk _007 (n=brian@bhlkwihed01-pool0-a44.bhlkwi.tds.net)`
`22:10.47`	`Corydon76-home`	`So banning it would have zero effect`
`22:10.52`	`CunningPike`	`Corydon76-home: OK - you can't ban it if it's not in the channel?`
`22:11.11`	`ucfMethod`	`cant you set the channel private, so you cant send msgs to it unless you are in it`
`22:11.16`	`Corydon76-home`	`CunningPike: there's no point to banning it if you're getting those messages and you're not in the channel`
`22:11.34`	`Corydon76-home`	`ucfMethod: that's already the case (+n)`
`22:11.38`	`ucfMethod`	`hmm`
`22:11.53`	`ucfMethod`	`i knew the ability existed, but couldnt remember the flag`
`22:12.08`	`Corydon76-home`	`CunningPike: you'd need to contact an IRCop for that`
`22:12.37`	`CunningPike`	`Corydon76-home: It joined, spammed and left - I thought there was a way you could prevent a particular nick from joining a channel`
`22:12.58`	`Corydon76-home`	`When did that happen?`
`22:13.27`	`CunningPike`	`Corydon76-home: 13:32 PST - about 45 mins ago`
`22:13.42`	`Corydon76-home`	`Oh`
`22:13.58`	`Corydon76-home`	`By this time, it probably has a new IP anyway`
`22:14.11`	`Corydon76-home`	`Most of those are infected PCs`
`22:15.06`	`*** join/#asterisk Igbothom_III (n=Hilton@office.quarkit.com.au)`
`22:15.24`	`CunningPike`	`Corydon76-home: Aye (sigh) - oh well`
`22:17.30`	`*** join/#asterisk grandy (n=chatzill@c-71-198-130-108.hsd1.ca.comcast.net)`
`22:18.01`	`grandy`	`hello.... for IAX2 clients to connect to asterisk, is it correct that I only need UDP on port 4569 open?`
`22:18.20`	`CunningPike`	`grandy: That's the idea..... :)`
`22:20.05`	`*** join/#asterisk shepimport (n=shepimpo@c-68-45-93-26.hsd1.nj.comcast.net)`
`22:21.02`	`*** join/#asterisk PakiPenguin (n=uppal@linuxpakistan/admin/pakipenguin)`
`22:21.06`	`PakiPenguin`	`hello everyone`
`22:21.09`	`shepimport`	`Hey all... does anyone know where the media stream in a sip call is controlled? i.e. allow for a direct media call vs transcoding?`
`22:21.18`	`shepimport`	`rtp stream`
`22:22.17`	`CunningPike`	`shepimport: That's part of the SIP negotiation, isn't it? Reinvites, etc?`
`22:22.59`	`CunningPike`	`shepimport: And the transcoding is performed by asterisk when it bridges the two legs of the call, unless I've had too much eggnog`
`22:23.41`	`CunningPike`	`Qwell[]: And it's Elbonians I don't like. I have nothing against Albanians`
`22:23.57`	`grandy`	`thanks cunningpike`
`22:24.15`	`BSDTech`	`1.4 rocks`
`22:24.20`	`CunningPike`	`grandy: You're welcome`
`22:24.20`	`*** join/#asterisk wunderkin (i=kev@ip72-208-3-221.ph.ph.cox.net)`
`22:24.24`	`bkruse`	`BSDTech: indeed it does!`
`22:24.24`	`grandy`	`btw, does anyone know if there is an iax2 implementation for j2me`
`22:24.34`	`BSDTech`	`j2me ?`
`22:27.06`	`TripleFFFF`	`also`
`22:27.07`	`TripleFFFF`	`<PROTECTED>`
`22:27.12`	`*** part/#asterisk TripleFFFF (n=TripleFF@145-27.mc.cite.net)`
`22:27.36`	`shepimport`	`cunning: it is part of the sip negotiation... does asterisk provide a way to modify it?`
`22:27.47`	`grandy`	`BSDTech: java mobile edition`
`22:27.54`	`BSDTech`	`ok`
`22:28.00`	`CunningPike`	`shepimport: Modify how?`
`22:28.16`	`grandy`	`also, is there a high level list of big changes in 1.4 anywhere?`
`22:28.24`	`BSDTech`	`I need a good java based sip phone`
`22:28.29`	`russellb`	`grandy: the CHANGES file in 1.4`
`22:28.34`	`grandy`	`russellb: ok`
`22:28.35`	`CunningPike`	`grandy: changes.txt in the tarball`
`22:28.40`	`grandy`	`CunningPike: ok`
`22:29.44`	`russellb`	`or http://svn.digium.com/view/asterisk/branches/1.4/CHANGES`
`22:31.06`	`Rhizome`	`hm, SpeechCreate() ;; Voice Recognition Engine interface...`
`22:31.16`	`Rhizome`	`Now that sounds neat ;)`
`22:31.52`	`russellb`	`yup, for use with Lumenvox ...`
`22:31.52`	`Cyon`	`hehe`
`22:31.59`	`Cyon`	`Very neat; perfect for detecting cold-callers and mother-in-laws and sending them to an infinite-hold queue.`
`22:35.13`	`BSDTech`	`well anyone wrote a good conversion script yet for extensions.conf to extensions.ael`
`22:36.32`	`sbingner`	`BSDTech, yes`
`22:36.35`	`sbingner`	`nm`
`22:36.37`	`sbingner`	`no :b`
`22:36.45`	`BSDTech`	`grrrr`
`22:36.47`	`russellb`	`that would be very difficult ...`
`22:36.57`	`russellb`	`that's like ... assembly to C`
`22:37.03`	`russellb`	`it just doesn't go that direction naturally.`
`22:37.08`	`*** join/#asterisk fx0 (n=fx0@cypher.punk.net)`
`22:37.14`	`BSDTech`	`ael is not easy`
`22:37.21`	`BSDTech`	`but I need to learn it`
`22:37.29`	`BSDTech`	`but was hoping for a short cut`
`22:42.10`	`*** join/#asterisk pfn (n=pfnguyen@netblock-66-245-252-239.dslextreme.com)`
`22:53.17`	`*** join/#asterisk RoyK (n=roy@217-175-39.100710.adsl.tele2.no)`
`22:54.19`	`CunningPike`	`BSDTech: Aren't we all :)`
`22:54.21`	`*** join/#asterisk posixisposi (n=andy@user-0c93jo3.cable.mindspring.com)`
`22:54.33`	`BSDTech`	`lol`
`22:59.44`	`*** join/#asterisk Mike800 (n=mike800@wsip-70-167-155-211.oc.oc.cox.net)`
`23:00.18`	`*** join/#asterisk irq (n=dan@wsip-70-167-112-5.sd.sd.cox.net)`
`23:01.03`	`Mike800`	`Anyone around?`
`23:01.31`	`CunningPike`	`314 of us`
`23:01.36`	`Mike800`	`:-)`
`23:01.49`	`Mike800`	`clever`
`23:02.23`	`Mike800`	`i'm having a problem with voicemail`
`23:02.45`	`CunningPike`	`~suggestions`
`23:02.47`	`jbot`	`rumour has it, suggestions is 1) Don't ask to ask. Just say your problem, 2) Don't repeat until 5 mins after, 3) Read and re-read the docs first, then admit it if you REALLY don't understand. You're wasting your time and ours if you haven't at least tried. 4) If your problem ain't solved, come back in 12 hrs or 24 hrs later. We're very international. 5) Be polite ...`
`23:02.58`	`Qwell[]`	`5 minutes? yuck`
`23:03.03`	`Rhizome`	`hehe`
`23:03.13`	`Mike800`	`:-)`
`23:03.30`	`mercestes`	`Yea, they should wait longer than five minutes.`
`23:03.32`	`mercestes`	`2 hours maybe.`
`23:03.33`	`Mike800`	`well, basically, asterisk isnt creating the correct permissions when creating a new mailbox`
`23:03.47`	`CunningPike`	`Mike800: Running as non-root?`
`23:03.52`	`Mike800`	`nope`
`23:04.04`	`Mike800`	`asterisk is running as root`
`23:04.14`	`CunningPike`	`Mike800: What permissions is it using then?`
`23:04.54`	`Mike800`	`well, it needs 777 for /var/spool/asterisk/default/{extension}/*`
`23:05.03`	`Qwell[]`	`no it doesn't`
`23:05.20`	`Qwell[]`	`if something is running as root, 000 is plenty`
`23:05.26`	`Corydon76-home`	`Depends on how you're accessing them`
`23:05.42`	`Mike800`	`well, im stumped`
`23:05.45`	`*** part/#asterisk isladelobos (n=user@212.Red-83-33-148.dynamicIP.rima-tde.net)`
`23:05.49`	`Qwell[]`	`What is the actual problem?`
`23:05.54`	`Corydon76-home`	`If you're accessing them from the web, and you'd prefer not to give the apache user root privileges, 777 might be wanted`
`23:05.57`	`Mike800`	`i created the directory with 777 permissions and it didnt give me the errors`
`23:06.16`	`Mike800`	`Dec 27 15:05:18 ERROR[13392]: app.c:1161 ast_lock_path: Unable to create lock file '/var/spool/asterisk/voicemail/default/15/Old': No such file or directory`
`23:06.20`	`Mike800`	`thats one of the errors`
`23:06.23`	`Mike800`	`it gives a few of them`
`23:06.29`	`Qwell[]`	`Corydon76-home: chown to root:nobody, give it 660`
`23:06.42`	`Qwell[]`	`or 730 for a dir`
`23:07.00`	`Corydon76-home`	`Qwell[]: doesn't help if asterisk creates directories on the fly, as they'll be root:root`
`23:07.21`	`Qwell[]`	`Mike800: You're using realtime?`
`23:07.24`	`Mike800`	`nope`
`23:07.55`	`Corydon76-home`	`Mike800: what version?`
`23:08.01`	`Qwell[]`	`nfs mounted voicemail? some other method of sharing voicemail across two servers?`
`23:08.17`	`Mike800`	`1.2.12.1`
`23:08.27`	`Mike800`	`its a very standard install`
`23:08.29`	`Corydon76-home`	`Sounds like you're using an old 1.2, from before we solved that problem`
`23:08.35`	`bkruse`	`nfs for voicemail?`
`23:08.39`	`bkruse`	`why!!?!?!?!`
`23:08.41`	`Mike800`	`no nfs for voicemail`
`23:08.51`	`bkruse`	`good`
`23:08.51`	`Mike800`	`so this was a known bug?`
`23:08.52`	`Corydon76-home`	`bkruse: for sharing across multiple servers`
`23:08.57`	`*** join/#asterisk dahunter3 (n=dahunter@pool-71-110-65-182.lsanca.dsl-w.verizon.net)`
`23:08.58`	`bkruse`	`that would be a good idea`
`23:09.02`	`bkruse`	`i thought it was for "speed"`
`23:09.10`	`Corydon76-home`	`Mike800: was, I thought it had been fixed for months`
`23:09.10`	`bkruse`	`i did that when attempting to "distribute" asterisk`
`23:09.18`	`dahunter3`	`anyone have a sip company that they would recommend?`
`23:09.35`	`bkruse`	`packet8 does sip trunks`
`23:09.37`	`bkruse`	`and there CHEAP`
`23:09.38`	`Corydon76-home`	`bkruse: no, it's not for speed; it's for versatility`
`23:09.52`	`bkruse`	`Corydon76-home: good point, i can see how this would play in....`
`23:09.52`	`Mike800`	`so 1.2.14 should work?`
`23:09.54`	`dahunter3`	`bkruse: And the quality is excellent?`
`23:10.05`	`Corydon76-home`	`Mike800: yes, definitely`
`23:10.05`	`bkruse`	`dahunter3: not sure about that.....just know its cheap :]`
`23:10.11`	`bkruse`	`how many voicemails is that over a 100megabit lines?`
`23:10.18`	`Mike800`	`ok...i'll upgrade and let you know what happens`
`23:10.26`	`Mike800`	`btw- i met you at Astricon :-)`
`23:10.31`	`Corydon76-home`	`bkruse: depends upon the codec`
`23:10.36`	`dahunter3`	`Okay, my driver is quality not price ;P`
`23:10.37`	`bkruse`	`Corydon76-home: of course, sorry`
`23:10.38`	`naftali5`	`anyone has metermaids working on 1.2.14?`
`23:10.40`	`Corydon76-home`	`Mike800: that's impossible`
`23:10.40`	`bkruse`	`thats interesting though`
`23:10.59`	`bkruse`	`Corydon76-home: have you done any kind of clustering(not actual calls) but distributing the load of asterisk?`
`23:10.59`	`ucfMethod`	`anything major in upgrading from 1.2 to 1.4`
`23:11.02`	`Corydon76-home`	`Mike800: I've never been to Astricon`
`23:11.07`	`Mike800`	`wait...nevermind`
`23:11.09`	`Mike800`	`that wasnt you`
`23:11.12`	`bkruse`	`ucfMethod: yes!`
`23:11.14`	`naftali5`	`ucfMethod, yes`
`23:11.14`	`Mike800`	`lol`
`23:11.42`	`ucfMethod`	`i hope i dont have to rewrite alot of dialplans`
`23:11.44`	`Mike800`	`wait...are you sure? i could have sworn i was introduced to you`
`23:11.49`	`Corydon76-home`	`bkruse: classic clustering doesn't work for time-sensitive applications`
`23:11.55`	`Mike800`	`or maybe they were joking`
`23:12.13`	`naftali5`	`the metermaids patch seems has not been updated after 1.2.9, but it is not in until 1.4, is there any way to get this to work?`
`23:12.26`	`Corydon76-home`	`bkruse: you must customize the clustering method to fit the task at hand`
`23:12.31`	`bkruse`	`right`
`23:12.57`	`bkruse`	`Corydon76-home: i realize this, thats why we are distributing the calls, not trying to balance the load on each machine over to the next, like a beowulf cluster`
`23:12.57`	`Corydon76-home`	`So call distribution is how you effectively cluster Asterisk`
`23:13.07`	`bkruse`	`ya :]`
`23:13.32`	`bkruse`	`im working on getting some set documentation on it.......`
`23:13.37`	`Corydon76-home`	`Mike800: I've been to Spring VON in San Jose and to IP4IT in Vegas`
`23:13.59`	`Corydon76-home`	`other than that, I've been to Digium HQ many times`
`23:14.00`	`Mike800`	`oh...ok :-)`
`23:14.25`	`naftali5`	`so noone has metermaids working? :(`
`23:14.26`	`Corydon76-home`	`unless you were at either PhreakNIC or BSDCon 2000...`
`23:14.37`	`Mike800`	`nope...neither`
`23:15.27`	`Corydon76-home`	`I've been to PhreakNIC since 1999 or so, and I've been the financial director for the past 2 years`
`23:15.45`	`Mike800`	`wow...nice`
`23:15.48`	`*** join/#asterisk X-Rob (n=Rob@dsl-202-173-151-24.qld.westnet.com.au)`
`23:16.38`	`Corydon76-home`	`Yeah, so, you'll find me at PhreakNIC generally`
`23:16.47`	`Mike800`	`gotcha`
`23:17.06`	`*** join/#asterisk h0 (n=fakhir@unaffiliated/fakhir)`
`23:17.14`	`Mike800`	`you know what...i just remembered...i met russelb at astricon`
`23:17.22`	`Qwell[]`	`and Qwell`
`23:17.28`	`Mike800`	`did i?`
`23:17.40`	`russellb`	`Mike800: sweet :)`
`23:17.49`	`Mike800`	`i met you through anthony`
`23:18.22`	`russellb`	`cool`
`23:18.35`	`russellb`	`i'm a pretty scary guy.`
`23:18.43`	`Qwell[]`	`I'll say`
`23:18.48`	`Mike800`	`haha`
`23:19.31`	`naftali5`	`ok, last try... anyone know if i can get blinkenlights for my parkin spots in 1.2.14??`
`23:20.12`	`Corydon76-home`	`Yeah, you would have met me at Astricon, except that they moved it a month this year, to the week after PhreakNIC and I was still recovering`
`23:20.20`	`naftali5`	`there was a patch for 1.2.9 and it is in 1.4, what about 'tween`
`23:20.46`	`Corydon76-home`	`Maybe they'll move it back to September next year`
`23:21.58`	`Mike800`	`ouch...asterisk is crashing now when i try to dial anything...has no problem starting up...`
`23:22.12`	`Mike800`	`i just upgraded to 1.2.14`
`23:22.19`	`bkruse`	`:X`
`23:22.24`	`bkruse`	`core dumpage?`
`23:22.26`	`Mike800`	`yup`
`23:22.44`	`bkruse`	`did you remove your older modules ? rm -rf /usr/lib/asterisk/modules/*`
`23:22.52`	`Mike800`	`hmm...good idea`
`23:22.59`	`Mike800`	`forgot to do that`
`23:25.13`	`*** join/#asterisk lesouvage (n=lesouvag@cc341200-a.assen1.dr.home.nl)`
`23:25.16`	`Mike800`	`i did a make upgrade...which i've never done before`
`23:25.28`	`Mike800`	`im gonna do a make clean, make, make install next`
`23:31.22`	`*** part/#asterisk Beighto (n=chatzill@64.160.113.130)`
`23:36.50`	`*** join/#asterisk FarrisG (n=lckirk@gateway.wiquest.com)`
`23:37.32`	`FarrisG`	`I have a call queue I setup. I'm using roundrobin, but if I set penalties, then the queue rings the first agent, times out, then tries the first agent again. It never rings anyone with a higher penalty`
`23:37.57`	`angler`	`FarrisG, use rrmemory`
`23:38.25`	`FarrisG`	`angler: I don't want to use rrmemory, because I want it to always ring the first agent first.`
`23:38.45`	`*** join/#asterisk AstawerksdotCom (n=Astawerk@170.206.224.46)`
`23:39.08`	`angler`	`roundrobin is deprecated and won't be in future versions because of its issues`
`23:39.40`	`FarrisG`	`angler: So then what is someone supposed to do if they want a strict calling order? Just use a ring group?`
`23:39.50`	`Qwell[]`	`rrmemory`
`23:40.11`	`angler`	`FarrisG, use QUEUE_PRIO`
`23:40.41`	`angler`	`hrm maybe thats not what u want`
`23:41.22`	`angler`	`try rrmemory and see if it works that way u want it`
`23:41.34`	`FarrisG`	`I suppose I could use a ring group made up of the static agents, and have it overflow into a queue for when none of the static agents are available. But this seems like pretty basic queue functionality`
`23:42.39`	`FarrisG`	`angler: I already did. If I use rrmemory, and the first agent doesn't answer, but the second one does, then the next call to the queue starts with the THIRD agent. Again, I need the queue to always, every time, without fail, call the first agent first`
`23:44.14`	`*** join/#asterisk stealth (n=stealth@6.206.204.68.cfl.res.rr.com)`
`23:44.38`	`angler`	`Then i suppose u will need to do it with multiple queues`
`23:46.01`	`*** join/#asterisk X-Rob_ (n=rob-x@dsl-202-173-151-24.qld.westnet.com.au)`
`23:46.22`	`*** part/#asterisk X-Rob_ (n=rob-x@dsl-202-173-151-24.qld.westnet.com.au)`
`23:46.40`	`*** join/#asterisk andresmujica (n=AndresMu@190.24.104.25)`
`23:49.35`	`*** join/#asterisk pussfeller (n=Friendof@166-82-183-46.quickclick.ctc.net)`
`23:51.44`	`ManxPower`	`FarrisG: then you do not want rrmemory`
`23:51.47`	`ManxPower`	`I think you want roundrobin`
`23:52.24`	`ManxPower`	`FarrisG: if the first agent is special then you can send the call to that agent BEFORE it hits the queue`
`23:53.31`	`FarrisG`	`ManxPower: That's what I'm doing, thanks. I actually created a ring group, with all of my static agents that have strict order. Then, if none of the usual suspects are available, it will call a queue with whoever happens to be available`
`23:54.11`	`ManxPower`	`FarrisG: that is pretty much what I do`
`23:54.41`	`*** join/#asterisk visba (n=dca[lapt@c-24-8-53-17.hsd1.co.comcast.net)`
`23:55.01`	`*** part/#asterisk visba (n=dca[lapt@c-24-8-53-17.hsd1.co.comcast.net)`
`23:55.06`	`FarrisG`	`This is for our door phone, so if the receptionist sitting in front of the door is there and someone is dumb enough to hit the button, I don't want the system ringing somebody on the other end of the building`
`23:56.23`	`ManxPower`	`I'd check to see if the recptionist is on the phone (knows he/she is at the desk) and if someone presses the button, announce something rude about a customer`
`23:57.05`	`FarrisG`	`I'd go for a good old fart sound myself`
`23:57.06`	`ManxPower`	`I set up an asterisk server once to monitor /var/log/messages, when it saw a packet blocked by the firewall filters it played ping.wav via the overhead paging.`
`23:57.21`	`ManxPower`	`Got an e-mail the next day asking if they had relocated to a submarine at war.`
`23:57.38`	`ManxPower`	`There were MANY more blocked packets than I expected.`
`23:57.38`	`*** join/#asterisk [TK]D-Fender (n=joe@64.235.216.2)`
`23:58.21`	`*** join/#asterisk linagee_ (n=linagee@ip68-8-184-71.sd.sd.cox.net)`
`23:59.30`	`FarrisG`	`A friend of mine once monitored traffic through the firewall and looked for hex data equivalent to certain flesh tones and then copied those packets into files in his own ~. Said he got the best porn from the stuff people in the office were getting.`

Generated by irclog2html.pl by Jeff Waugh - find it at freshmeat.net! Modified by Tim Riker to work with blootbot logs, split per channel, etc.