| 00:08.16 | irule | hi |
| 00:10.41 | irule | I found some weird behavior, I have a 0 exten to dial an operator, and 500 exten for a sip phone, if I dial into default,s,1, and then dial 601, I notice that * ignores the 6? and jumps on the 0? what I see in the log is that 0 ends up being dialed |
| 00:18.21 | *** join/#asterisk brut- (n=brut@66.173.4.254) |
| 00:18.48 | tzafrir_laptop | what exactly does hdlcgen do? |
| 00:19.02 | tzafrir_laptop | what is it good for? |
| 00:23.12 | *** join/#asterisk sandorp (n=sandor@firewall2.wsi.net) |
| 00:24.11 | *** join/#asterisk infowolfe (n=infowolf@unaffiliated/infowolfe) |
| 00:25.45 | *** join/#asterisk skotch (n=skotch@ns3.plugin.com.br) |
| 00:26.16 | sandorp | for some reason my SIP softphone can accept phone calls that come in from the PSTN on analog lines, but I can't make an outbound call on the same analog line; I know I'm missing something dumb ... I had to restore my asterisk from backup and some of the files I actually had to recreate .... I just can't figure out what I'm missing; any ideas? |
| 00:33.07 | *** part/#asterisk c6vette (n=Cori@ip70-176-167-93.ph.ph.cox.net) |
| 00:36.37 | *** join/#asterisk Habbie (i=j1fame52@ip565b6ee8.direct-adsl.nl) |
| 00:36.55 | Habbie | hi - anyone awake with Cisco 12SP+ firmware files newer than L2.J2 ? |
| 00:39.24 | sandorp | DOH, I forgot to define the outbound trunk! |
| 00:40.21 | madcap | jfc. |
| 00:55.11 | *** join/#asterisk sharp (n=sharp@dsl092-234-217.phl1.dsl.speakeasy.net) |
| 00:58.21 | *** join/#asterisk DaveCanoe (n=Dave@canoe404.dclg.ca) |
| 01:02.59 | *** join/#asterisk fakhir (n=Fakhir@unaffiliated/fakhir) |
| 01:03.09 | *** join/#asterisk remmo (n=junk@202.1.119.80) |
| 01:04.49 | *** join/#asterisk xpandercom (i=Xpander4@235.sub-70-223-39.myvzw.com) |
| 01:06.34 | *** join/#asterisk zeedo (n=zeedo@reboot-robot.net) |
| 01:09.56 | xpandercom | Hello, anyone here like polycom sip phones for NAT'D deployments? |
| 01:11.09 | *** part/#asterisk mog (n=mog@c-71-207-214-192.hsd1.al.comcast.net) |
| 01:12.07 | xpandercom | we're having a crazy problem getting more than 1 polycom to register behind a NAT |
| 01:12.26 | xpandercom | the first phone registers and seizes port 5060 so no other phones can ergister and get 401 unauthoized |
| 01:12.38 | xpandercom | individually every phone will register as long as it's the only phone trying to register |
| 01:13.01 | mihinomenest | change the ports that the phones use. |
| 01:13.02 | _DAW | Ive never had that issue, may be your nat device. |
| 01:13.05 | JerJer | you must change the ports |
| 01:13.15 | JerJer | you have no choice |
| 01:15.19 | xpandercom | i must change the ports on each phone individually? |
| 01:16.39 | xpandercom | we tried moving asterisk out from behind any nat device |
| 01:16.53 | xpandercom | and still experienced the problem, the polycoms were still behind a nat |
| 01:21.10 | xpandercom | under the sip settings should we not put 5060 in the port field? |
| 01:23.11 | xpandercom | in the actual polycom phone? |
| 01:25.48 | *** join/#asterisk wothinn (i=root@vs1.svartalfheim.net) |
| 01:26.29 | *** join/#asterisk antlers (n=antlers@ip70-173-89-173.lv.lv.cox.net) |
| 01:33.12 | *** join/#asterisk bjohnson (n=bjohnson@i209-195-110-172.cia.com) |
| 01:33.59 | *** join/#asterisk edgruberman (n=bobweeve@adsl-074-185-215-060.sip.msy.bellsouth.net) |
| 01:35.26 | edgruberman | hi |
| 01:43.28 | anonymouz666 | Jul 6 22:15:52 NOTICE[6235]: pbx_spool.c:269 attempt_thread: Call failed to go through, reason 3 |
| 01:43.29 | anonymouz666 | NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Call Delivered, peerstate Call Received |
| 01:43.30 | anonymouz666 | any idea? |
| 01:44.35 | *** join/#asterisk Excelsior (n=Excelsio@unaffiliated/excelsior) |
| 01:44.39 | *** part/#asterisk Excelsior (n=Excelsio@unaffiliated/excelsior) |
| 02:00.12 | *** join/#asterisk fakhir (n=Fakhir@unaffiliated/fakhir) |
| 02:02.35 | BSD_Tech | ok we have a build issue on rpath |
| 02:02.53 | BSD_Tech | openssl does not find krb5.h |
| 02:03.11 | BSD_Tech | there for res_crypto no go |
| 02:08.59 | *** join/#asterisk c6vette (n=Cori@ip70-176-167-93.ph.ph.cox.net) |
| 02:13.06 | *** join/#asterisk lisandropm (n=lisandro@cpe-22-76.bvconline.com.ar) |
| 02:17.45 | *** join/#asterisk brookshire (i=mbrooks@hijacked.us) |
| 02:17.46 | *** join/#asterisk ShadowHntr (i=sentinel@wikipedia/Shadowhntr) |
| 02:45.47 | *** join/#asterisk coppice (n=chatzill@93.195.17.210.dyn.pacific.net.hk) |
| 02:55.24 | *** join/#asterisk snuff-home (n=snuffy@C-59-101-201-33.bur.connect.net.au) |
| 03:03.56 | *** join/#asterisk dexpdx (n=dex@66-162-134-242.static.twtelecom.net) |
| 03:04.19 | dexpdx | hey, anyone know what the the default switchtype is in zapata.conf if someone doesn't set one? |
| 03:08.08 | *** join/#asterisk stkn_ (n=stkn@gentoo/developer/pdpc.active.stkn) |
| 03:09.06 | *** join/#asterisk echo--- (n=echo@64.184.118.232) |
| 03:31.36 | *** join/#asterisk riddlebox (n=james@75-132-245-209.dhcp.stls.mo.charter.com) |
| 03:34.01 | *** join/#asterisk the_hydra (n=Mulyadi@125.164.99.27) |
| 03:34.46 | *** join/#asterisk fakhir (n=Fakhir@unaffiliated/fakhir) |
| 03:36.32 | *** join/#asterisk type0 (n=type0@190-146-42-72.gci.net) |
| 03:36.34 | type0 | yoyo |
| 03:36.41 | the_hydra | yo |
| 03:37.17 | type0 | im about to try to get teliax and a hughesnet satellite dish to work tomorrow |
| 03:40.01 | type0 | any words of encouragement? |
| 03:40.43 | BSD_Tech | exten = 13232077392,1,Set(DB(Last/Caller=${CALLERID(NUM)})ok why is this not working on 1.4.6 |
| 03:40.45 | Nugget | take beer. |
| 03:40.58 | type0 | think it'll work? |
| 03:41.28 | BSD_Tech | it use to work |
| 03:41.42 | BSD_Tech | sorry |
| 03:42.58 | *** join/#asterisk kiscokid (n=Ron@adsl-216-101-109-187.dsl.snfc21.pacbell.net) |
| 03:43.20 | type0 | im talking about satellite voip |
| 03:43.21 | type0 | :D |
| 03:44.04 | coppice | voice over satellites sucks badly |
| 03:44.41 | kiscokid | they gave that idea up in the 80s |
| 03:45.13 | coppice | they never really used it at all. in the days of satellite it was satellite one way, and cable the other |
| 03:45.37 | type0 | you really think so? |
| 03:45.46 | type0 | it should only be like 1500ms RTT |
| 03:46.17 | coppice | it should be more like 600ms, but that breaks up a conversation pretty badly |
| 03:46.35 | type0 | I dont really care about the timing |
| 03:46.43 | type0 | I guess I could route it over the microwave and the canopy |
| 03:46.49 | type0 | I'm just looking at last resort kinda thing |
| 03:46.51 | coppice | you will when you try to talk :-) |
| 03:47.29 | kiscokid | last resort = wireless sat phone |
| 03:47.48 | coppice | ooh, Iridium gets a customer :-) |
| 03:48.40 | coppice | but iridium is low orbit, so the delay is OK |
| 03:49.17 | *** join/#asterisk bkruse_home (n=kruz@69.73.127.92) |
| 03:49.23 | kiscokid | the ones they used in the 80s were 20,000 miles |
| 03:51.21 | coppice | they used them in the 60s and 70s too |
| 03:52.04 | coppice | if fibre hadn't worked out so well, we'd be using them now |
| 03:52.13 | kiscokid | I believe that SBS was the first company offering service to the public |
| 03:52.25 | kiscokid | and they started up in the 80s |
| 03:52.41 | *** join/#asterisk bmg505 (n=leon@196.209.177.15) |
| 03:52.57 | type0 | i have 5 iridium phones |
| 03:53.04 | BSD_Tech | ok asterisk needs to fix the # as end of dial |
| 03:53.21 | kiscokid | fix it how? |
| 03:53.26 | BSD_Tech | I have clients who want extensions wiht # infront of them |
| 03:53.37 | BSD_Tech | and they are yelling at me |
| 03:53.44 | BSD_Tech | 1.4.6 wont let you |
| 03:54.07 | BSD_Tech | I get a busy tone for any exten that starts with # |
| 03:55.06 | kiscokid | seems like a wierd requirement to have # in the extension |
| 03:55.08 | BSD_Tech | they have it on thier old system and they want it on the new system |
| 03:55.28 | coppice | kiscokid: I was thinking more of PSTN over satellite, but inmarsat was offering service at the end of the 60s |
| 03:55.55 | kiscokid | was inmarsat pstn? |
| 03:56.19 | coppice | no. inmarsat was like SBS, but earlier |
| 03:56.50 | kiscokid | oh well, I guess I never heard of it before |
| 03:57.34 | type0 | haha |
| 03:57.35 | coppice | I think it was a JV amongst a bunch of governments |
| 03:57.38 | type0 | spinn vodka |
| 03:57.39 | *** join/#asterisk mog (n=mog@c-71-207-214-192.hsd1.al.comcast.net) |
| 03:57.39 | *** mode/#asterisk [+o mog] by ChanServ |
| 03:58.06 | type0 | so the verdict is |
| 03:58.08 | type0 | its going to suck? |
| 03:58.10 | kiscokid | was it primarily for international calling? |
| 03:58.30 | *** part/#asterisk c6vette (n=Cori@ip70-176-167-93.ph.ph.cox.net) |
| 03:58.36 | type0 | hows the president call from airforce one? |
| 03:58.45 | *** join/#asterisk ovnicraft (n=logan@201.218.4.214) |
| 03:59.06 | ovnicraft | i use x-lite softphone.. this is the best? |
| 03:59.11 | *** join/#asterisk ken^^ (n=ken@74-212-202-58.static-ip.telepacific.net) |
| 03:59.14 | ken^^ | yo yo yo |
| 03:59.20 | kiscokid | type0: private US spy sattelite? |
| 03:59.35 | ovnicraft | can you recommend me one |
| 03:59.37 | ken^^ | hey, i just got a shiny new sangoma card to tack on with my digium tdm400p |
| 03:59.50 | type0 | hmmm |
| 03:59.55 | type0 | cant I just lease space on that? |
| 04:00.07 | type0 | ;) |
| 04:00.22 | type0 | YEAH HI GEORGE.. IM GONNA NEED SOME SPACE ON YOUR SATELLITE |
| 04:00.51 | kiscokid | the president might not want to share infrastructure with other gov'ts |
| 04:01.28 | ovnicraft | anyone can help me |
| 04:02.56 | kiscokid | ovnicraft: I've been using Idefisk softphone because it supports IAX |
| 04:03.50 | *** join/#asterisk ManxPower (n=manxpowe@209.16.72.139) |
| 04:06.42 | kiscokid | ken: which Sangoma card? |
| 04:08.00 | *** part/#asterisk mog (n=mog@c-71-207-214-192.hsd1.al.comcast.net) |
| 04:08.58 | ken^^ | kiscokid: a104d |
| 04:09.10 | ken^^ | er, a104dx i guess ? its the PCI-E version |
| 04:09.58 | ken^^ | bah, my problem is that on reboot the wctdm driver gets loaded before the wanpipe drivers, so my zaptel and zapata files fuck up so chan_zap doesn't get started =( |
| 04:10.02 | ken^^ | sucks ass |
| 04:10.13 | ken^^ | i need to figure out how to make wanpipe start before wctdm or something |
| 04:12.45 | kiscokid | ken: that's a T1/E1 card? |
| 04:12.50 | ken^^ | kiscokid: yes |
| 04:13.27 | ken^^ | kiscokid: its very nice, works great. pretty much "plug-n-play" |
| 04:14.32 | kiscokid | I'm gonna need a 1 port T1 soon. |
| 04:14.50 | ken^^ | kiscokid: get hardware echo cancel ... you can't go wrong with the a100d |
| 04:15.16 | BSD_Tech | night |
| 04:15.45 | kiscokid | will I have any trouble if I want to put into the same box as a Sangoma quad FXO card? |
| 04:15.51 | ken^^ | kiscokid: nope |
| 04:16.12 | ken^^ | kiscokid: the problems i've seen is from mixing digium + sangoma cards in the same box |
| 04:16.33 | ken^^ | kiscokid: and that's really more of just a config issue. they work fine next to each other |
| 04:16.58 | *** join/#asterisk lisandropm (n=lisandro@cpe-22-76.bvconline.com.ar) |
| 04:17.05 | kiscokid | I can see that that would be possible. The automated install of wanpipe seems to be pretty complex |
| 04:17.35 | *** join/#asterisk ovnicraft (n=logan@201.218.4.214) |
| 04:17.54 | ken^^ | kiscokid: not so much ... there's just one script you run from the driver download -- ./Setup install |
| 04:18.00 | ken^^ | and that handles everything |
| 04:18.17 | kiscokid | yeah, it does it all and that's really nice. |
| 04:18.54 | kiscokid | just saying that if something went wrong I'd hate to have to try to fix it |
| 04:19.59 | kiscokid | ken: are you going to run 4 T1's? |
| 04:21.19 | ken^^ | kiscokid: no -- but the card was free ;) |
| 04:21.26 | kiscokid | cool |
| 04:22.39 | ken^^ | kiscokid: more specifically, my phone company is taking up to $2400 for the new lines we installed, that is with proof of the card purchase. so i bought the best card that was $2400 or less ... |
| 04:23.27 | ken^^ | http://www.telephonydepot.com/product_p/105-052-003x.htm |
| 04:23.57 | ken^^ | kiscokid: to be fair, we may add something like 20 more phone lines soon |
| 04:24.06 | ken^^ | kiscokid: if so, then it's nice having the card |
| 04:39.42 | *** part/#asterisk kiscokid (n=Ron@adsl-216-101-109-187.dsl.snfc21.pacbell.net) |
| 04:48.57 | *** join/#asterisk ez` (n=ez@c66.110.149-45.clta.globetrotter.net) |
| 04:49.37 | nohop | good evening |
| 04:50.16 | *** join/#asterisk RypPn (i=TuMbL@rosscom.demon.co.uk) |
| 04:53.00 | nohop | does anyone know if there are programs (preferably for linus) that emulate a analog modem, but don't use a phoneline, but SIP ? |
| 04:53.18 | nohop | (which you could use for fax or BBS) |
| 04:54.02 | nohop | one that creates a /dev/ptyx 'interface' for modem-software to use, or something similar |
| 04:55.07 | [TK]D-Fender | nohop, lookup "iaxmodem" on the WIKI, And FORGET BBS, but fax MIGHT work at G.711 under OPTIMAL circumstances |
| 04:56.04 | nohop | i would need to be able to make a 1200 baud connection... that must be resonable, right ? |
| 04:56.26 | nohop | i'll check that one out, thanks alot! |
| 04:58.18 | *** join/#asterisk bkruse_home (n=kruz@69.73.127.92) |
| 04:58.40 | *** part/#asterisk bkruse_home (n=kruz@69.73.127.92) |
| 04:58.58 | nohop | how cool is that... it's in the apt deposit :) |
| 05:02.07 | *** join/#asterisk mihinomenest (i=sMaQ@cerebus.clandestineresearch.com) |
| 05:08.25 | *** join/#asterisk nuonguy (n=john@c-24-6-175-26.hsd1.ca.comcast.net) |
| 05:20.34 | *** join/#asterisk L|NUX (n=linux@unaffiliated/lnux/x-10290) |
| 05:21.33 | L|NUX | hi |
| 05:21.38 | L|NUX | can some one help me with VoiceMail Storage in ODBC |
| 05:21.40 | L|NUX | i have every thing setuped |
| 05:25.33 | *** join/#asterisk obnauticus (n=obnautic@c-71-59-162-60.hsd1.wa.comcast.net) |
| 05:26.14 | *** join/#asterisk JuliusSpencer (n=julius@60-234-130-224.bitstream.orcon.net.nz) |
| 05:26.59 | *** join/#asterisk blitzrage (n=blitzrag@asterisk/documenteur-extraordinaire/blitzrage) |
| 05:26.59 | *** mode/#asterisk [+o blitzrage] by ChanServ |
| 05:27.17 | JuliusSpencer | hi... I'm having a little trouble installing the wctdm module |
| 05:27.27 | JuliusSpencer | anyone here likely to be able to give advice? |
| 05:28.10 | JuliusSpencer | install /sbin/modprobe --ignore-install wctdm && /sbin/ztcfg insmod /lib/modules/2.6.21-1.3228.fc7/misc/wctdm.ko |
| 05:28.10 | JuliusSpencer | ZT_CHANCONFIG failed on channel 1: No such device or address (6) FATAL: Error running install command for wctdm |
| 05:28.26 | JuliusSpencer | anyone seen that before? |
| 05:28.31 | *** join/#asterisk pepeu (n=federico@189.167.92.21) |
| 05:28.47 | JuliusSpencer | I've googled the crap out of it, but don't seem o be able to find anything that will work |
| 05:31.03 | JuliusSpencer | Does anyone know if this is the right place to ask? |
| 05:34.05 | *** join/#asterisk JuliusSpencer (n=julius@60-234-130-224.bitstream.orcon.net.nz) |
| 05:34.32 | blitzrage | it is... but looks like no one is around |
| 05:34.39 | blitzrage | it IS Friday night |
| 05:34.41 | *** join/#asterisk vgster (n=vgster@cpc2-ledn1-0-0-cust826.leed.cable.ntl.com) |
| 05:34.49 | madcap | that syntax looks wrong |
| 05:34.58 | JuliusSpencer | hi.. |
| 05:35.23 | JuliusSpencer | I just reconnected... did anyone see what I wrote before? |
| 05:36.47 | JuliusSpencer | you mean it IS Saturday night... :) |
| 05:37.06 | madcap | try: insmod /lib/modules/2.6.21-1.3228.fc7/misc/wctdm.ko |
| 05:37.15 | JuliusSpencer | k tks |
| 05:37.33 | JuliusSpencer | I get nothing... |
| 05:37.40 | JuliusSpencer | I mean no feedback |
| 05:37.41 | madcap | then: ztcfg |
| 05:38.02 | JuliusSpencer | ZT_CHANCONFIG failed on channel 1: No such device or address (6) |
| 05:38.23 | JuliusSpencer | this only happens when I change the zaptel.conf file... I have set up two entries in it: |
| 05:38.47 | JuliusSpencer | fxsks=1,2 fxoks=3,4 |
| 05:38.52 | JuliusSpencer | (on separate lines) |
| 05:39.26 | *** join/#asterisk pepeu (n=federico@189.167.92.21) |
| 05:39.51 | madcap | probably fedora's udev |
| 05:40.50 | JuliusSpencer | hmmm ok... so... is there a way I can go about finding out or trying to work around? is tere some debugesque thing I can try? |
| 05:41.13 | JuliusSpencer | I've bene through the manual but it a few mistakes |
| 05:41.52 | madcap | look at: /etc/udev/rules.d/50-udev.rules.old |
| 05:42.04 | JuliusSpencer | cool tks |
| 05:42.33 | JuliusSpencer | hmm there isn't a .old |
| 05:42.38 | JuliusSpencer | but there is a rules |
| 05:42.41 | ovnicraft | i cant hear my record in *77 |
| 05:45.03 | JuliusSpencer | I found a README.udev. I'll give those a crack |
| 05:45.18 | JuliusSpencer | tks for the help (so far ;) ) |
| 05:46.27 | ovnicraft | how to debug asterisk |
| 05:48.18 | *** join/#asterisk troy- (n=troy@CPE00907f17e478-CM00186845db94.cpe.net.cable.rogers.com) |
| 05:48.31 | troy- | can anyone tell me how i can make the message waiting indicator light work on my cisco 7941 phones? |
| 05:50.12 | madcap | troy: add mailbox= in your device |
| 05:50.18 | madcap | should work |
| 05:50.33 | troy- | in sip.conf for each phone? |
| 05:52.27 | madcap | yep |
| 05:53.16 | madcap | also you might need to change something in the xml |
| 05:53.45 | troy- | madcap, the way i resolved it the last time was by changing the mwi option in chan_sip.c before compiling |
| 05:53.52 | troy- | just cant remember how i did it then |
| 05:58.07 | troy- | madcap, should i set mailbox=exten@default ? |
| 05:58.57 | madcap | mailbox=<mailbox number> |
| 05:59.10 | troy- | its already set like that |
| 06:00.06 | troy- | (obviously without the <> |
| 06:00.27 | madcap | edit chan_sip.c and delete the RFC compliant bit |
| 06:00.46 | troy- | any idea what lines that is :( |
| 06:00.52 | troy- | knowing me i'd remove something vital :P |
| 06:00.54 | madcap | search for 0/0 |
| 06:01.07 | troy- | what should it be changed to? |
| 06:01.13 | madcap | just remove it |
| 06:01.15 | troy- | (that sounds very *very* familiar) |
| 06:01.53 | troy- | madcap, the cisco 7941 with SIP 8.2 known to have any sort of voice distortion or quality degredation issues? |
| 06:02.46 | JuliusSpencer | hmmmm I looked into the README.udev, but came up empty. The rules file already had the zaptel stuff in it... |
| 06:03.26 | madcap | JuliusSpencer: is zaptel kernel module loaded? |
| 06:03.54 | JuliusSpencer | <PROTECTED> |
| 06:03.54 | JuliusSpencer | zaptel 181668 1 wctdm |
| 06:03.54 | JuliusSpencer | crc_ccitt 6337 2 zaptel,irda |
| 06:04.22 | madcap | pastebin the zaptel devices in the udev |
| 06:14.42 | JuliusSpencer | uh.. not sure how to do that... |
| 06:15.02 | JuliusSpencer | how do I look in the udev? |
| 06:15.33 | madcap | vi /etc/udev/rules.d/udev.rules |
| 06:15.35 | madcap | ;p |
| 06:16.10 | JuliusSpencer | oh like: # Section for zaptel device |
| 06:16.10 | JuliusSpencer | KERNEL=="zapctl", NAME="zap/ctl" |
| 06:16.10 | JuliusSpencer | KERNEL=="zaptimer", NAME="zap/timer" |
| 06:16.10 | JuliusSpencer | KERNEL=="zapchannel", NAME="zap/channel" |
| 06:16.10 | JuliusSpencer | KERNEL=="zappseudo", NAME="zap/pseudo" |
| 06:16.11 | JuliusSpencer | KERNEL=="zap[0-9]*", NAME="zap/%n" |
| 06:17.22 | madcap | I think you have too many = |
| 06:18.07 | JuliusSpencer | ah... those were in there already.. ie. I didn't modifythis file |
| 06:18.16 | JuliusSpencer | I guess the zaptel install put them there |
| 06:18.23 | madcap | hmm |
| 06:18.40 | JuliusSpencer | so are these links to possible devices? |
| 06:19.11 | madcap | you should have a directory /dev/zap with a few devices in it |
| 06:19.14 | JuliusSpencer | oh I see they're in /dev/zap |
| 06:19.30 | JuliusSpencer | channel ctl pseudo timer transcode |
| 06:19.45 | madcap | looks ok there |
| 06:20.35 | JuliusSpencer | crw------- 1 root root 196, 254 2007-07-07 16:51 channel |
| 06:20.35 | JuliusSpencer | crw------- 1 root root 196, 0 2007-07-07 16:51 ctl |
| 06:20.35 | JuliusSpencer | crw------- 1 root root 196, 255 2007-07-07 16:51 pseudo |
| 06:20.35 | JuliusSpencer | crw------- 1 root root 196, 253 2007-07-07 16:51 timer |
| 06:20.35 | JuliusSpencer | crw-rw---- 1 asterisk asterisk 196, 250 2007-07-07 16:51 transcode |
| 06:20.43 | JuliusSpencer | (just in case perms are the problem) |
| 06:21.00 | madcap | don't paste in here |
| 06:21.15 | JuliusSpencer | oh.. k |
| 06:28.05 | troy- | so much for dont paste in the channel :P |
| 06:45.48 | *** join/#asterisk Frogzoo (n=Frogzoo@202.155.165.25) |
| 06:53.46 | *** join/#asterisk kiscokid (n=Ron@adsl-216-101-109-187.dsl.snfc21.pacbell.net) |
| 06:53.52 | j0 | anyone here using a bluetooth headset with a softphone? |
| 06:56.55 | *** join/#asterisk jeffgus (n=jeffgus@greengables.zimage.com) |
| 07:12.47 | *** join/#asterisk rmayorga (n=rmayorga@unaffiliated/rmayorga) |
| 07:13.41 | *** join/#asterisk gardo (n=gardo@wizap00060.globequest.com.ph) |
| 07:19.42 | *** join/#asterisk obnauticus (n=obnautic@c-71-59-162-60.hsd1.wa.comcast.net) |
| 07:41.57 | *** join/#asterisk tr2x (n=alvar@80-218-185-55.dclient.hispeed.ch) |
| 07:51.49 | *** join/#asterisk dickyjoe (n=richardl@124.149.102.183) |
| 07:51.57 | dickyjoe | Hello |
| 07:52.04 | *** join/#asterisk ManxPower (n=manxpowe@015-852-897.area5.spcsdns.net) |
| 07:53.34 | dickyjoe | Pretty quiet here at the moment |
| 08:02.28 | dickyjoe | thanks supaplex |
| 08:03.19 | Supaplex | np |
| 08:06.02 | *** join/#asterisk DrAk0 (n=ljd@nelug/coreteam/luisjose) |
| 08:12.34 | *** join/#asterisk scardinal (n=supreme@port816.ds1-suoe.adsl.cybercity.dk) |
| 08:17.17 | *** join/#asterisk brian (n=brian@unaffiliated/brian) |
| 08:17.40 | brian | hey, what is the cheapest ISDN PRI provider/ |
| 08:19.15 | Supaplex | yourself? eg, a local loopback ptp. :P haha. |
| 08:22.40 | *** join/#asterisk tsurko (n=tsurko@77.70.15.52) |
| 08:24.39 | tzafrir_home | brian, and then again, probably also depends on your location (assuming "loopback" is the wrong answer...) |
| 08:24.54 | brian | I'm in Florida. |
| 08:32.28 | dickyjoe | Ive setup my first asterisk server today. I am having great fun |
| 08:35.59 | Siya | j0: I've used a BT headset with Skype but not with softphone yet, should work fine though |
| 08:41.16 | *** join/#asterisk DJ_Kit (n=lamass@83.149.52.8) |
| 08:41.20 | *** part/#asterisk DJ_Kit (n=lamass@83.149.52.8) |
| 08:55.54 | *** join/#asterisk fordfrog (n=fordfrog@gentoo/developer/fordfrog) |
| 08:58.34 | *** join/#asterisk DJ_Kit (n=lamass@83.149.52.8) |
| 08:58.39 | DJ_Kit | hi guys |
| 08:58.45 | DJ_Kit | i have a quastion |
| 08:59.01 | DJ_Kit | can i set my outgoing number manualy? |
| 08:59.11 | madcap | yes |
| 08:59.19 | DJ_Kit | I mean i want to call from +1)my_office_number |
| 08:59.24 | DJ_Kit | via asterisk |
| 08:59.30 | madcap | yes.. |
| 08:59.33 | DJ_Kit | can i do it? |
| 08:59.35 | DJ_Kit | how? |
| 08:59.54 | madcap | setup an extension to dial to change the outgoing callerid |
| 09:00.22 | DJ_Kit | where i can find ready settings? |
| 09:00.28 | DJ_Kit | my frien said |
| 09:00.44 | DJ_Kit | that the provaider will kill my callerid |
| 09:00.47 | DJ_Kit | and will set another |
| 09:00.59 | madcap | depends on the provider |
| 09:01.26 | DJ_Kit | ... |
| 09:03.37 | madcap | basically just set CALLERID before your dial function |
| 09:04.17 | DJ_Kit | and after... i have to only check this outgouing number? |
| 09:10.41 | *** join/#asterisk Chris-NB (n=chris@ip.tech.t-mobile.at) |
| 09:26.11 | kingsob | does the line need to be answered before using Zapateller? |
| 09:28.38 | *** join/#asterisk obnauticus (n=obnautic@c-71-59-162-60.hsd1.wa.comcast.net) |
| 09:36.06 | *** join/#asterisk andyd (n=andyd@212.183.136.194) |
| 09:37.38 | *** join/#asterisk Frogzoo (n=Frogzoo@202.155.165.25) |
| 09:50.44 | DJ_Kit | Bad balance - da best of music |
| 09:50.45 | DJ_Kit | ;) |
| 09:50.53 | DJ_Kit | listen to... |
| 09:57.50 | *** join/#asterisk andyd (n=andyd@212.183.134.208) |
| 10:00.39 | kingsob | is MeetMeCount gone in v1.4? im reading the book, and get this error |
| 10:00.40 | kingsob | <PROTECTED> |
| 10:04.37 | kingsob | i get the same thing but with MeetMe when i remove the line with MewetMeCount in it |
| 10:04.38 | kingsob | No application 'MeetMe' for extension |
| 10:07.32 | k31th | Guys im getting this error "Device does not match ACL" when im hooking up a slinksys SPA942 |
| 10:10.33 | *** join/#asterisk shinao1 (n=shinao1@dial-pool26.lagos.starcomms.net) |
| 10:13.20 | k31th | where is my ACL? |
| 10:14.37 | andyd | k31th: sip.conf |
| 10:14.51 | andyd | sip debug will help you realise whats not working. |
| 10:16.06 | k31th | andyd: does it basically mean wrong user / passwd? |
| 10:16.26 | andyd | Basically. |
| 10:16.56 | andyd | Or its guessing the wrong sip account because of an incorrect host= line or ... or .. |
| 10:17.03 | andyd | but sip debug will help realise what. |
| 10:19.35 | *** join/#asterisk jm|laptop (n=jm|home@dilbert.jamiem.com) |
| 10:20.57 | k31th | bindaddress |
| 10:21.03 | k31th | i put my subnet in there? |
| 10:46.17 | dickyjoe | Hi All I was wondering if someone could help me with a little issue I have |
| 10:49.45 | dickyjoe | can someone describe how to setup sip client to trip s extension rule |
| 10:50.56 | *** join/#asterisk porche (n=porche@81.215.112.142) |
| 10:50.59 | porche | hi all |
| 10:51.10 | porche | i have got a simple and dummy question, i am lost |
| 10:51.31 | porche | i try to connect asterisk box to telecom |
| 10:51.40 | porche | do I need fxo or fxs card? |
| 10:54.36 | porche | :) anybody home? |
| 10:55.14 | *** join/#asterisk dickyjoe (n=richardl@124.149.102.183) |
| 10:55.44 | brian | I'm home. |
| 10:55.49 | porche | grt |
| 10:56.01 | porche | brian do you know the answer of my question? |
| 10:58.03 | dickyjoe | porche whats the question |
| 10:59.19 | *** join/#asterisk snook3r (n=ariel@bzq-219-46-202.isdn.bezeqint.net) |
| 11:01.14 | dickyjoe | FXO plugs into telco |
| 11:01.37 | dickyjoe | FXS accepts an analouge phone |
| 11:02.08 | porche | got it, ok, i was digging with busydetect |
| 11:02.22 | porche | tried several options, i do not see the debug info at all |
| 11:02.36 | porche | seems like, asterisk does not trigger busy detect function |
| 11:02.39 | porche | namely ast_dsp_busydetect |
| 11:03.09 | porche | so, fxo must be configured as fxs_ks as signaling type |
| 11:03.57 | dickyjoe | i think thats right |
| 11:04.07 | dickyjoe | i don't have an analouge card |
| 11:04.24 | porche | i see, yes, my stupidity is buying tdm2400 |
| 11:04.30 | porche | to start small, |
| 11:04.38 | *** join/#asterisk Frogzoo (n=Frogzoo@202.155.165.25) |
| 11:04.49 | porche | as we dont have polarity reversal, asterisk cannot detect hang up at all |
| 11:05.10 | porche | even digging with the code, no way to make it work, this is really weird |
| 11:14.46 | *** join/#asterisk Frogzoo (n=Frogzoo@202.155.165.25) |
| 11:18.13 | *** join/#asterisk adorah (n=Michael@87.69.57.73.cable.012.net.il) |
| 11:19.14 | *** join/#asterisk xheliox (n=jeff@pdpc/supporter/active/xheliox) |
| 11:26.36 | *** join/#asterisk infowolfe (n=infowolf@unaffiliated/infowolfe) |
| 11:41.32 | *** join/#asterisk Frogzoo (n=Frogzoo@202.155.165.25) |
| 11:48.56 | *** join/#asterisk MrWup (i=root@80-46-38-124.static.dsl.as9105.com) |
| 11:49.17 | MrWup | say for example i originate a call using the manager interface, my sip handset auto dials a number |
| 11:49.33 | MrWup | how do i display on the sip handset's screen the number and name of the person it is dialling? |
| 11:49.40 | *** join/#asterisk zotz (n=zotz@24.244.163.157) |
| 11:50.35 | *** join/#asterisk gardo (n=gardo@125.60.243.93) |
| 11:55.34 | *** part/#asterisk porche (n=porche@81.215.112.142) |
| 12:07.46 | kingsob | i was just searching around the net for a web interface for meetme, and came across a link to "Adminsparadise", does this work with asterisk? |
| 12:07.50 | kingsob | http://www.adminsparadise.com/walkthroughs/phone-system/adminsparadise-voip-screenshots.html |
| 12:29.52 | *** join/#asterisk ftoledo (n=ftoledo@200.122.117.42) |
| 12:31.34 | shido6 | kingsob, that looks very much like Asterisk |
| 12:31.38 | shido6 | with a front end. |
| 12:32.26 | shido6 | like trixbox |
| 12:33.50 | ftoledo | hi al lim running asterisk 1.2 i have a x100p (intel modem) conected to zap channel pstn.. i call iax to pstn, the input sound (that i ear ) is perfecto), but my voice (output to the pstn is poor) i read many examples of echo cancelling but i cant find the correct setup, i use telefonica de argentina as pstn |
| 12:34.27 | ftoledo | anybode has this setup? |
| 12:34.57 | *** join/#asterisk ToyMan (n=Stuart@72.168.167.241) |
| 12:35.26 | ftoledo | sorry mi english is early morning here 8-) |
| 12:38.47 | kingsob | when i create a new "Conference Bridges" the extension box seems to be diabled, which is preventing me from adding a conference |
| 12:45.54 | *** part/#asterisk ftoledo (n=ftoledo@200.122.117.42) |
| 13:06.10 | *** join/#asterisk GaryH (n=chatzill@wallace.garysoft.co.uk) |
| 13:06.42 | shido6 | heh |
| 13:11.26 | *** join/#asterisk andyd (n=andyd@212.183.136.195) |
| 13:27.44 | *** join/#asterisk Frogzoo (n=Frogzoo@202.155.165.25) |
| 13:28.45 | *** join/#asterisk [TK]D-Fender (n=Joe@64.235.216.2) |
| 13:42.55 | *** join/#asterisk jm|laptop (n=jm|home@dilbert.jamiem.com) |
| 13:44.01 | *** join/#asterisk sergee (i=kvirc@195.94.224.197) |
| 13:56.37 | *** join/#asterisk stimpie (n=michiel@ip565faf27.direct-adsl.nl) |
| 14:02.28 | codefreeze | any chan_mobile users out there? How in heaven do I fill in the address=, port= fields in chan_mobile.conf? |
| 14:11.40 | *** join/#asterisk ivanfm (n=ivanfm@c934f322.virtua.com.br) |
| 14:15.06 | codefreeze | Hmmm, I paired to the computer with my cellphone, but asterisk "mobile search" just says No Bluetooth Cell/ Mobile devices found." |
| 14:15.58 | codefreeze | which, incidentally, kinda puts a damper on the relationship, if you get my drift.... |
| 14:16.29 | shido6 | oh god |
| 14:16.46 | *** join/#asterisk gardo (n=gardo@124.6.178.178) |
| 14:17.07 | shido6 | how many simultaneous calls did you plan on using with bt |
| 14:17.07 | shido6 | ? |
| 14:17.23 | codefreeze | shido6: I'd settle for 1. |
| 14:18.30 | shido6 | set a pin, pair it with the bluetools kit then edit the.conf for whatever channel driver you're using and make a change to the dialplan to receive/send calls - call quality is going to sound like the headset so dont expect it to sound crystal clear. |
| 14:19.46 | codefreeze | set the pin, paired. Edited the mobile.conf file; need the address= and port= magic numbers. |
| 14:20.44 | codefreeze | Ugh, am I a dummy. Cellphone itself will tell me the address= info.... |
| 14:27.19 | codefreeze | ugh. OK. I'm dumb as a post. Put the phone in discovery mode. then do mobile search. Ah-ha! port 4. |
| 14:27.54 | shido6 | LOL |
| 14:27.55 | shido6 | :) |
| 14:30.52 | Kwakwa | codefreeze: What hardware do you have connected to ur asterisk box to allow bluetooth -> asterisk calls? |
| 14:31.46 | codefreeze | Oh, cool: "-- Bluetooth Device steve has connected. -- Bluetooth Device steve initialised and ready." |
| 14:31.57 | Kwakwa | :) |
| 14:32.36 | codefreeze | Kwakwa: I stuck a handy dandy netgear bluetooth usb2 adapter in the back of my asterisk pc/box. |
| 14:32.53 | *** join/#asterisk pzn (i=foobar@201-1-130-181.dsl.telesp.net.br) |
| 14:33.21 | codefreeze | It's running ubuntu, poor thing, so I did apt-gets for the bluez stuff. |
| 14:33.51 | codefreeze | I think I did a modprobe for hci |
| 14:33.52 | Kwakwa | hmm, can't seem to locate that handy piece of kit |
| 14:34.02 | *** join/#asterisk RoyK (n=roy@ip-253-5-149-91.dialup.ice.no) |
| 14:34.06 | RoyK | ~book |
| 14:34.07 | jbot | hmm... book is a book called Asterisk: The Future of Telephony which is found at http://www.asteriskdocs.org/modules/tinycontent/index.php?id=11 |
| 14:34.23 | *** part/#asterisk RoyK (n=roy@ip-253-5-149-91.dialup.ice.no) |
| 14:34.49 | codefreeze | Kwakwa: do an apt-cache search bluez |
| 14:35.12 | codefreeze | The bluez stuff should already be in the kernel... |
| 14:35.15 | *** join/#asterisk riddlebox (n=james@75-132-225-75.dhcp.stls.mo.charter.com) |
| 14:35.15 | pzn | I'm new to asterisk. Can you help me with a question, so I can know if it solves my problem? The problem is: I have raw/uncompressed audio 8ksamples/16bits in two linux fifos (1 is input, other output). is there a way with asterisk to send/receive this audio from this fifo to a PAP/FXS device? |
| 14:35.21 | Kwakwa | yah, u install all the bluez-* stuff? |
| 14:36.08 | codefreeze | Pretty much. I did the -dev versions just for the halibut. |
| 14:36.25 | Kwakwa | codefreeze: :) Can't seem to locate the netgear bluetooth device on froogle |
| 14:37.01 | Kwakwa | ahh, american froogle I can |
| 14:37.09 | codefreeze | Bought mine from.... uh..... Cyberguys |
| 14:38.44 | Kwakwa | Is it definitley netgear or is it IOGEAR? |
| 14:39.27 | *** join/#asterisk wunderkin (n=wunderki@dslstat-bvi4-344.fastq.com) |
| 14:40.36 | codefreeze | Ha, netgear, iogear, let me look... yep, sorry, it is IOgear. Pardon my confusion. |
| 14:41.59 | Kwakwa | codefreeze: Cheers, the GBU211 one.. nice to know :) |
| 14:42.12 | Kwakwa | Lemme know what the quality is like now u've got it working :D |
| 14:42.35 | codefreeze | Kwakwa: setting up the dialplan to make/get my first calls now... |
| 14:42.41 | Kwakwa | gl |
| 14:42.52 | codefreeze | Oh, and yes, the gbu221 |
| 14:43.29 | codefreeze | A lot of package for so small a contents. |
| 14:44.51 | Kwakwa | heh :) So it was as simple as apt-getting all the bluez stuff, grabbing the address info and doing a mobile search (from ur phone I assume) to get the port? |
| 14:46.25 | *** join/#asterisk Frogzoo (n=Frogzoo@202.155.165.25) |
| 14:47.14 | pzn | can asterisk work with linux pipes (fifos) with uncompressed audio? |
| 14:50.15 | *** join/#asterisk philippel (n=p_lindhe@c-24-17-254-189.hsd1.mn.comcast.net) |
| 14:52.18 | *** join/#asterisk BSD_Tech (n=BSDTech@adsl-69-234-181-57.dsl.irvnca.pacbell.net) |
| 14:55.35 | tzafrir_laptop | pzn, for moh? |
| 14:56.41 | tzafrir_laptop | to an FXS device? I'm not sure |
| 14:56.52 | tzafrir_laptop | could you please elaborate on what you need? |
| 14:57.23 | tzafrir_laptop | you have a PAP2 FXS device connected to your asterisk? |
| 14:58.22 | tzafrir_laptop | maybe this is something like chan_nbs, any maybe I'm just talking nonsense |
| 14:59.00 | pzn | I am developing a hardware that will send/receive audio uncompressed to a serial port. this audio will be available in the linux server. I'll have a PAP2 FXS connected. when the person gets the phone connected to PAP, he should listen to the audio that comes from one fifo (that is connected to serial port), and if he speaks, the audio should go to one linux fifo (that will deliver in serial port) |
| 14:59.40 | pzn | since I never used a voip, I don't know if this is possible in asterisk. do you think this is possible? |
| 15:00.20 | *** join/#asterisk putnopvu1 (n=putnopvu@user-24-214-124-177.knology.net) |
| 15:03.35 | *** part/#asterisk GaryH (n=chatzill@wallace.garysoft.co.uk) |
| 15:03.48 | pzn | the basic question is: can asterisk work with linux fifos as audio input and output? |
| 15:06.41 | *** join/#asterisk bcnx (n=root@d54C0E110.access.telenet.be) |
| 15:07.27 | bcnx | Hi all. About to go berzerk. I've created awav file, PCM 16 bits, 8 khz, mono for music on hold, Asterisk plays it, but I don't hear a thing. |
| 15:07.46 | bcnx | asterisk wav files play fine |
| 15:08.35 | Kwakwa | Can you hear it play the .wav files that come with asterisk? |
| 15:09.10 | bcnx | yes |
| 15:09.15 | bcnx | that one plays fine |
| 15:09.29 | bcnx | but if I put my own wav file in the same class, nothing |
| 15:09.46 | bcnx | if a play it with winamp my wav plays perfect |
| 15:09.52 | *** join/#asterisk riddlebox (n=james@75-132-225-75.dhcp.stls.mo.charter.com) |
| 15:09.58 | bcnx | gofigure :-s |
| 15:09.59 | Kwakwa | That would assume there's a problem with the file itself then |
| 15:10.01 | Kwakwa | :/ |
| 15:10.16 | bcnx | yeah, I agree, but wat |
| 15:10.24 | bcnx | it has the same properties |
| 15:10.43 | bcnx | I converted it to araw file as well, same result |
| 15:10.53 | Kwakwa | http://www.voip-info.org/wiki/view/Using+ffmpeg+to+convert+Music+On+Hold+files |
| 15:11.19 | bcnx | I looked at that page, but didn't try to convert with ffmpeg, I'll try that |
| 15:11.21 | Kwakwa | Maybe write your file as an .mp3 then convert it using the options above |
| 15:11.24 | bcnx | thank you Kwakwa |
| 15:11.27 | Kwakwa | yah, nps |
| 15:11.36 | pzn | bcnx: "sox" is algo a good sound converter. |
| 15:14.39 | *** join/#asterisk Andri[DK] (n=andri@hydrogen.calidris.com) |
| 15:14.45 | tzafrir_laptop | pzn, directly? only for moh. But this is only unidirectional |
| 15:15.00 | tzafrir_laptop | You basically need an Asterisk channel that supports it |
| 15:15.07 | Andri[DK] | Is there any fancier way of storing voicemail than the 8 KHz wav file? |
| 15:15.18 | pzn | tzafrir_laptop: I need bidirectional. what is "moh"? |
| 15:15.27 | tzafrir_laptop | music-on-hold |
| 15:15.30 | Andri[DK] | medal of honor... or music on hold |
| 15:15.30 | Andri[DK] | :P |
| 15:15.36 | pzn | :-) |
| 15:15.38 | tzafrir_laptop | ~moh |
| 15:15.39 | jbot | moh is, like, Music On Hold. Good information about how to set it up in the various possible ways can be found at http://www.voip-info.org/wiki/index.php?page=Asterisk+config+musiconhold.conf |
| 15:16.20 | Andri[DK] | is there any way of storing voicemail in ogg, mp3 or something... I'm getting complaints of bad quality in the 8khz voicemails |
| 15:16.22 | pzn | tzafrir_laptop: so you mean that asterisk can't do this and that I should search for another pabx/voip app? |
| 15:16.43 | coppice | bcnx: unless asterisk support for wave files has improved recently, it will only play them if they look a certain way. it falls over with generic wave files. |
| 15:17.20 | tzafrir_laptop | coppice, it's not about playing files. It's bidirectional |
| 15:17.38 | pzn | can asterisk work with /dev/dsp in bidirectional audio? |
| 15:17.41 | coppice | he said certain wave files won't play while others do |
| 15:17.54 | tzafrir_laptop | pzn, yes, and also with aalsa |
| 15:18.11 | tzafrir_laptop | check chan_oss and chan_alsa |
| 15:18.52 | pzn | tzafrir_laptop: so If I make a kernel driver that gets the audio from the serial port and emulates a /dev/mydev (that is like /dev/dsp), asterisk will be able to work with it? I'll have 12 /dev/mydev1, /dev/mydev2... |
| 15:19.21 | pzn | can it work with 12 devices as /dev/dsp? |
| 15:20.05 | tzafrir_laptop | pzn, either than or slightly modify the channel driver to pump data from and to your fifo |
| 15:21.10 | pzn | tzafrir_laptop: it is also easy for me to build a kernel driver that behaves as /dev/dsp and has the same ioctls! I'll proceed this way. |
| 15:22.20 | pzn | tzafrir_laptop: thanks for your help, I'll try to use asterisk for my project. |
| 15:24.23 | *** part/#asterisk Andri[DK] (n=andri@hydrogen.calidris.com) |
| 15:25.26 | *** join/#asterisk sunsmasher (n=Beamer@rrcs-24-73-230-90.se.biz.rr.com) |
| 15:26.42 | *** join/#asterisk sunsmasher (n=Beamer@66.251.47.154) |
| 15:29.09 | mvanbaak | anyone here has a netbsd box to test a patch for asterisk trunk ? |
| 15:42.08 | *** join/#asterisk Frogzoo (n=Frogzoo@202.155.165.25) |
| 15:42.13 | *** join/#asterisk ivanfm (n=ivanfm@c934f322.virtua.com.br) |
| 15:45.46 | *** join/#asterisk lisandropm (n=lisandro@cpe-22-76.bvconline.com.ar) |
| 15:47.52 | *** join/#asterisk Cardoe (n=Cardoe@gentoo/developer/Cardoe) |
| 15:48.38 | Cardoe | looking for some reviews/recommendations of providers for a basic residential setup of asterisk. the focus is on low cost since it's more of a backup if the cell phone is dead. |
| 15:52.04 | BSD_Tech | read http://www.voip-info.org/wiki |
| 15:52.19 | BSD_Tech | do a search for providers |
| 15:52.57 | BSD_Tech | so many providers out ther and 1/2 are flybynight be ware |
| 15:54.50 | Cardoe | that's the thing. I didn't want to get caught up by a flyby night one |
| 15:54.53 | mvanbaak | BSD_Tech: what bsd versions are you running to test asterisk on ? |
| 15:58.08 | BSD_Tech | 6.2-stable |
| 15:58.33 | BSD_Tech | and 6.2 release p5 I believe |
| 15:58.53 | Cardoe | BSD_Tech: right now I was leaning towards BroadVoice... but was willing to take other suggestions basically.. it looks like someone's screwed with the wiki lately and the list providers seems oddly small |
| 15:59.07 | crimethinker | broadvoice still owes me a hundred bucks |
| 15:59.29 | mvanbaak | BSD_Tech: you have obsd trunk there ? |
| 15:59.30 | BSD_Tech | NuFone/Callcentric |
| 15:59.40 | BSD_Tech | no only FBSD |
| 15:59.54 | BSD_Tech | not played with openbsd |
| 15:59.59 | BSD_Tech | or net bsd |
| 16:00.18 | BSD_Tech | I am working on a nano bsd setup also |
| 16:00.44 | BSD_Tech | we currently have a break we are trying to fix thou |
| 16:01.09 | BSD_Tech | the current zaptel 1.4.3 on bsd and asterisk 1.4.6 dont seem to play well |
| 16:01.39 | BSD_Tech | asterisk says it sees the zaptel install but fails to compile the chan_zap |
| 16:01.39 | *** join/#asterisk anthm_mobile (n=anthm@h4608dbbd.area4.spcsdns.net) |
| 16:02.53 | BSD_Tech | we are working to fix it |
| 16:03.00 | BSD_Tech | and get the ports updated |
| 16:05.12 | *** join/#asterisk fakhir (n=Fakhir@unaffiliated/fakhir) |
| 16:05.23 | mvanbaak | BSD_Tech: I meant: do you have asterisk-trunk on fbsd ? |
| 16:05.49 | BSD_Tech | I have a few servers running on freebsd |
| 16:06.02 | *** join/#asterisk ftoledo (n=ftoledo@200.122.112.160) |
| 16:06.37 | BSD_Tech | but zapteh 1.4.3 and asterisk 1.4.6 are not working at the min |
| 16:06.46 | BSD_Tech | we are working to fix |
| 16:06.48 | mvanbaak | because recent trunk wont compile on obsd now |
| 16:06.56 | mvanbaak | and I wrote a patch for that |
| 16:07.07 | mvanbaak | just checking wether you can test it or not |
| 16:07.07 | ftoledo | i setup asterisk with x100p (intel modem) when i call from iax to pstn i ear perfect but mi voice is poor in other end |
| 16:07.22 | ftoledo | i read about echo cancelling but dont find the best solution |
| 16:07.45 | ftoledo | i connect mi pstn to telefonica argentina, any idea? |
| 16:07.48 | BSD_Tech | the x100p clones are crap pitch it and get a real tdm card |
| 16:10.28 | ftoledo | BSD_Tech: yes i think too.. is very extrange..i ear good..but the out to the pstn is echoed..can be a fullduplex problem of this fkng board? |
| 16:11.51 | BSD_Tech | can be |
| 16:12.56 | Cardoe | anyone have any experience with VoicePulse? |
| 16:13.54 | BSD_Tech | I hear they are ok but the min 50 dollar to start for byod is to much |
| 16:14.03 | BSD_Tech | same with Broadvoice |
| 16:14.05 | mvanbaak | BSD_Tech: http://bugs.digium.com/view.php?id=10145 |
| 16:14.58 | crimethinker | why on earth must every Sun server have an Opteron in it |
| 16:15.07 | Qwell | crimethinker: they...don't? |
| 16:15.19 | crimethinker | well that, or Sparc, which I just can't afford |
| 16:15.32 | Qwell | well, what else are they going to use? |
| 16:15.39 | Qwell | Intel? What's the point? |
| 16:16.00 | BSD_Tech | mvanbaak, I am not using svn trunk |
| 16:16.10 | *** join/#asterisk Strom_M (n=strom@ip70-170-60-8.lv.lv.cox.net) |
| 16:16.11 | BSD_Tech | I am using 1.4.6 tar.gz |
| 16:16.12 | Cardoe | BSD_Tech: you've used callcentric? |
| 16:16.25 | BSD_Tech | and the zaptel-bsd |
| 16:16.38 | BSD_Tech | yes I have a account with them |
| 16:16.48 | BSD_Tech | I have 3 pay as you go trunks |
| 16:17.05 | [TK]D-Fender | Cardoe, I have (through a client). They were happy and the rates are excellent |
| 16:17.10 | BSD_Tech | callcentric/nufone |
| 16:17.30 | BSD_Tech | dont rememnber the 3rd one since its used for fail over |
| 16:18.19 | BSD_Tech | .01.9 cents a min is dirt cheap |
| 16:18.39 | BSD_Tech | for pay as you go |
| 16:18.39 | Qwell | .01.9? |
| 16:18.45 | BSD_Tech | .019 cents a min is dirt cheap |
| 16:18.48 | mvanbaak | heya Qwell |
| 16:18.49 | Qwell | .019? |
| 16:19.34 | Qwell | so, just over 1 cent per hour? |
| 16:19.52 | Cardoe | well I was looking more for incoming |
| 16:20.00 | BSD_Tech | qwell read back |
| 16:20.08 | Cardoe | but their personal unlimited for $6 seems reasonable for unlimited incoming |
| 16:20.09 | BSD_Tech | BSD_Tech> .01.9 cents a min is dirt cheap |
| 16:20.25 | Qwell | .019 * 60 = 1.14 |
| 16:20.28 | Qwell | 1 cent per hour |
| 16:20.58 | BSD_Tech | 0.019 is almost 2 censt a min |
| 16:21.03 | Qwell | umm, no |
| 16:21.09 | Cardoe | BSD_Tech: he's technically correct |
| 16:21.13 | Qwell | 0.019 cents per minute is 0.019 cents per minute |
| 16:21.21 | Cardoe | you did state .019 cents per minute |
| 16:21.31 | Cardoe | what you meant was 1.9 cents per minute |
| 16:21.38 | Cardoe | we all understood |
| 16:21.52 | Cardoe | well.. most of us |
| 16:22.01 | BSD_Tech | he is busting my chops |
| 16:22.28 | BSD_Tech | but callcentric has been great |
| 16:22.43 | coppice | 1.9 cents a minute is bloody expensive |
| 16:22.46 | BSD_Tech | I have had no down time and outbound calls are nice and clear |
| 16:23.37 | BSD_Tech | not compaired to the phone company now days |
| 16:23.51 | [TK]D-Fender | Welcome to Verizon Math 101! |
| 16:24.09 | BSD_Tech | we have at&t here |
| 16:24.14 | BSD_Tech | use to be SBC |
| 16:24.33 | DarKnesS_WolF | i love read command it all i needed :-) |
| 16:25.04 | [TK]D-Fender | USA = AT&T |
| 16:25.14 | *** join/#asterisk rmayorga (n=rmayorga@unaffiliated/rmayorga) |
| 16:25.50 | BSD_Tech | depends on where you live |
| 16:25.59 | BSD_Tech | but for the most part now yes |
| 16:27.26 | Cardoe | BSD_Tech: it looks like their pay as you go inbound is 1.5 cents |
| 16:27.30 | [TK]D-Fender | BSD_Tech, Look at how the remergers have worked. They OWN everybody |
| 16:27.59 | Strom_M | [TK]D-Fender: AT&T has nothing to do with VZ, Q, or S |
| 16:29.19 | [TK]D-Fender | Strom_M, Where? |
| 16:29.36 | [TK]D-Fender | Strom_M, Ohm think I got it |
| 16:29.55 | BSD_Tech | cool my repeating clock works |
| 16:30.18 | BSD_Tech | now I have to write function checking |
| 16:30.34 | BSD_Tech | man writing dial plan from scratch is time consuming |
| 16:30.57 | mvanbaak | BSD_Tech: uhhuh |
| 16:32.17 | BSD_Tech | I have writen major functions and documented them but now I have to have the system check for them and check caller id |
| 16:32.43 | BSD_Tech | I even have it where you can change functions remotly in office |
| 16:32.46 | Cardoe | Thanks guys. I'm gonna sign up for callcentric. |
| 16:36.02 | *** join/#asterisk kombi (n=kombi@213.160.14.18) |
| 16:36.40 | kombi | to page an external number, what goes into the first parm? Page(???/number) ? |
| 16:37.18 | kombi | the outbound context? |
| 16:37.37 | BSD_Tech | external ? |
| 16:37.52 | kombi | like, someone further away.. |
| 16:38.04 | BSD_Tech | page or intercom |
| 16:38.10 | BSD_Tech | there is a diff |
| 16:38.18 | [TK]D-Fender | kombi, "show application page" |
| 16:38.27 | kombi | did..;) |
| 16:38.31 | BSD_Tech | and alot of people thing they are the same |
| 16:38.37 | [TK]D-Fender | kombi, you dial TECH jsut like in DIAL |
| 16:38.44 | kombi | ok.. |
| 16:39.12 | kombi | BSD_Tech: page to open up a room and invite others in, correct? |
| 16:39.24 | BSD_Tech | no |
| 16:39.32 | kombi | sigh.. |
| 16:39.35 | BSD_Tech | page pages multi phones |
| 16:39.47 | BSD_Tech | intercom is one on one |
| 16:40.02 | [TK]D-Fender | kombi, Page dials people just like dial except they can ALL answer. and in so doing are brdidged internally through MeetMe |
| 16:40.03 | kombi | thanks BSD_Tech, I'look that one up |
| 16:40.21 | BSD_Tech | paging is onway conversation |
| 16:40.25 | *** join/#asterisk nohop (n=root@cc501678-a.hgv1.dr.home.nl) |
| 16:40.31 | BSD_Tech | intercom allows the other person to respond |
| 16:40.49 | kombi | BSD_Tech: I thought you could give page the d switch for full duplex..? |
| 16:41.30 | kombi | Fender: that is kind of what I want though |
| 16:42.08 | BSD_Tech | I recall paging be ing 1 way |
| 16:42.30 | BSD_Tech | never used it for allowing responce |
| 16:42.40 | BSD_Tech | paging is just like a pa system |
| 16:42.43 | BSD_Tech | 1 way |
| 16:42.44 | kombi | BSD_Tech: default correct, I think I saw that switch option but I may be wrong |
| 16:42.58 | BSD_Tech | ok never new about the switch |
| 16:43.15 | *** part/#asterisk ftoledo (n=ftoledo@200.122.112.160) |
| 16:43.48 | kombi | but then again, how does one Dial(outbound/their number)? |
| 16:44.13 | BSD_Tech | no |
| 16:44.32 | [TK]D-Fender | kombi, Page *IS* Dial. Page(SIP/a&SIP/b&SIP/162543653 |
| 16:44.33 | kombi | one doesn't?;) |
| 16:44.41 | BSD_Tech | it would be Dial(SIP/IAX/LOCAL/MGCP/SKINNY |
| 16:44.48 | *** join/#asterisk cr4z3d (n=cr4z3d@ip70-162-117-87.ph.ph.cox.net) |
| 16:45.01 | kombi | Fender: I understand that.. I am just too stupid to even dial an outbound call here.. |
| 16:45.05 | BSD_Tech | IAX/IAX2 |
| 16:45.43 | kombi | BSD_Tech: ok.. or SIP if connected to a sip provider.. |
| 16:46.05 | BSD_Tech | yes |
| 16:46.10 | kombi | you guys scare the shit out of me |
| 16:46.12 | [TK]D-Fender | kombi, You can shove anythig your can do with DIAL into there. |
| 16:46.55 | Kwakwa | :) |
| 16:47.37 | kombi | konradmathieu@web.de |
| 16:48.35 | *** join/#asterisk shido6 (n=shido6@d221-68-200.commercial.cgocable.net) |
| 16:52.16 | kombi | nice one! |
| 16:52.36 | *** join/#asterisk steliosk (n=Stelios@ipa226.211.tellas.gr) |
| 16:52.46 | MrWup | i have one BRI line which is two 64k channels and a signalling channel |
| 16:52.53 | MrWup | how many calls can i put down it? |
| 16:53.23 | MrWup | maximum of two? |
| 16:53.23 | BSD_Tech | Kombi it still needs the function checking |
| 16:53.32 | kombi | scary.. |
| 16:53.37 | BSD_Tech | but its a great start for you to learn from |
| 16:53.49 | Strom_M | MrWup: two |
| 16:54.03 | *** join/#asterisk j0 (n=dan@S01060016b6b541d2.va.shawcable.net) |
| 16:54.06 | BSD_Tech | MrWup, it depends on how many channels your provider gives you |
| 16:54.17 | MrWup | one bri line, two channels 64k each |
| 16:54.21 | Strom_M | MrWup: two |
| 16:54.31 | BSD_Tech | ahh ok I missed that sorry |
| 16:54.37 | MrWup | not possible to divide that myself and have double the number of calls but half the quality? |
| 16:54.42 | Strom_M | no |
| 16:54.51 | MrWup | thats ok, had planned for that |
| 16:54.57 | Strom_M | one B channel per call |
| 16:55.05 | MrWup | the stupid engineer came along and he;s like... you can put like 20 calls through each one of these boxes |
| 16:55.19 | MrWup | dont know why youre getting 4 boxes only the biggest companies have this many |
| 16:55.28 | MrWup | youve got almost 80 possible lines here |
| 16:55.31 | *** join/#asterisk mightnare (n=mike@p4218-ipad06motosinmat.mie.ocn.ne.jp) |
| 16:55.36 | MrWup | that would be PRI surely? |
| 16:55.39 | Strom_M | "boxes"? |
| 16:55.44 | MrWup | im simply using ISDN 2e from BT |
| 16:55.57 | MrWup | which i always understood was just BRI... two 64 channels and a signalling chan |
| 16:56.59 | Strom_M | perhaps he mistook 2e for 30e |
| 16:57.11 | BSD_Tech | who was it I just emailed |
| 16:57.21 | BSD_Tech | brain just went thunp |
| 16:57.22 | MrWup | yeah i think he probably did |
| 16:57.33 | MrWup | which is odd considering he's the fken engineer who fits it |
| 16:58.08 | MrWup | anyway... 4 isdn2e boxes = 8 lines which is what i expected |
| 16:58.30 | Strom_M | or perhaps he was just an idiot |
| 16:58.35 | MrWup | yeah |
| 16:58.53 | Strom_M | MrWup: they're called "demarcation points" |
| 16:58.57 | Strom_M | not "boxes" |
| 16:59.02 | MrWup | heh ok |
| 16:59.31 | MrWup | only weird thing i found what that three of the demarcation points have a flashing green light which goes solid when u plug something in |
| 16:59.55 | MrWup | and one point has a light which is solid all the time and never flashes whether it is plugged into asterisk or not |
| 17:00.00 | MrWup | wonder if that means its fucke |
| 17:00.12 | Strom_M | does it /work/? |
| 17:00.17 | MrWup | dwill have to test it |
| 17:00.27 | MrWup | just wanted to check if thats some sort of well known omg its fucked sign =] |
| 17:00.39 | Strom_M | what is the label on the light? |
| 17:00.54 | MrWup | no label... just a little green light in the middle of the white casing |
| 17:01.06 | Strom_M | *shrug* |
| 17:01.07 | kombi | after some time, my installation stops doing Playback(), that is, they are shown in CLI but not heard while everything else such as MOH still works, can't find anything in the logs or with verbosity = 1000 |
| 17:02.54 | kombi | only reboot fixes it, not killall -1 astersisk.. |
| 17:04.01 | BSD_Tech | Kombi some og the info is fom the asterisk gui |
| 17:04.12 | BSD_Tech | killall -9 asterisk |
| 17:04.24 | kombi | that's the brutal one.. |
| 17:04.45 | BSD_Tech | you should linstall asterisk now |
| 17:04.54 | kombi | seems like another timer issure (thought I had wrangled that one down by disabling acpi) |
| 17:04.58 | BSD_Tech | and copy your dialplan to it |
| 17:05.16 | BSD_Tech | I have had acpi issues ona few systems |
| 17:06.12 | kombi | so now I disabled acpi in the kernel and still I get "kernel: lost some interupts at 1024Hz" |
| 17:06.34 | BSD_Tech | hmm |
| 17:06.39 | BSD_Tech | you have zaptel |
| 17:06.44 | BSD_Tech | for timing |
| 17:06.51 | kombi | yip, ztdummy |
| 17:06.59 | BSD_Tech | and setup a ntpd |
| 17:07.11 | kombi | think I did.. |
| 17:07.12 | BSD_Tech | so that its upadated all the tim |
| 17:07.16 | BSD_Tech | e |
| 17:07.25 | kombi | let me look into cron.. |
| 17:08.05 | BSD_Tech | back to dial pan |
| 17:08.10 | BSD_Tech | plan |
| 17:08.17 | BSD_Tech | gawd cant type today |
| 17:11.53 | kombi | So, to make an extension do an outbound call: exten => Dial(SIP/[outsideNo]) (given, we're on a sip provider) |
| 17:12.16 | kombi | ? |
| 17:12.37 | Strom_M | Dial(SIP/peer_name_in_sip.conf/number) |
| 17:13.05 | Strom_M | depending on provider's preferred method, of course |
| 17:13.05 | kombi | oh, ok.. |
| 17:14.38 | kombi | which is the peer name? username? |
| 17:15.17 | kombi | host? |
| 17:16.01 | BSD_Tech | peer like exten = s,1,Dial(SIP/callcentric12345 |
| 17:16.06 | BSD_Tech | peer like exten = s,1,Dial(SIP/callcentric/12345 |
| 17:16.12 | BSD_Tech | sorry missed a / |
| 17:16.26 | kombi | got it..! |
| 17:19.56 | kombi | ;) |
| 17:24.23 | kombi | awesome! |
| 17:25.26 | kombi | now, can one do that (page someone and get them into the conference) on an allready existing call? |
| 17:26.39 | bcnx | Hi all - anyone any idea how to configure asterisk so you can take over calls to other extensions? |
| 17:26.59 | BSD_Tech | its called parking |
| 17:27.03 | BSD_Tech | and pickup |
| 17:27.39 | bcnx | parking was somehting else as I understand it |
| 17:27.40 | BSD_Tech | or do you mean interupting the call and grabbing it |
| 17:27.54 | bcnx | but you gave me a term to with which I can look for info |
| 17:28.02 | bcnx | thats' it |
| 17:28.06 | bcnx | grabbing it |
| 17:28.10 | BSD_Tech | never seen it done |
| 17:28.18 | bcnx | really? |
| 17:28.34 | BSD_Tech | for one it would be rude |
| 17:28.52 | bcnx | no, I think I explanied it wrong |
| 17:28.54 | BSD_Tech | 2 I believe the person would have to park the call and then you pick it up |
| 17:29.13 | bcnx | suppose an extension is ringing and you hear it ringing but also that nobody picks up |
| 17:29.23 | BSD_Tech | or do you mean if your phone rings and your at another desk |
| 17:29.27 | bcnx | you then redirect the call to your extension |
| 17:29.31 | bcnx | yes |
| 17:29.35 | BSD_Tech | thats called remote pickup |
| 17:29.51 | bcnx | okay, I'll look for that on the docs |
| 17:29.53 | BSD_Tech | look at features.conf |
| 17:29.53 | bcnx | thanks! |
| 17:30.04 | bcnx | splendid, thx again! |
| 17:30.08 | BSD_Tech | remote extension pickup |
| 17:31.40 | BSD_Tech | and it also depends on whet phones you have on how you map it |
| 17:31.56 | *** join/#asterisk andyd (n=andyd@212.183.134.65) |
| 17:32.09 | BSD_Tech | there is a issue with the default *8 on gxp2000 and you have to remap to ** |
| 17:32.13 | *** join/#asterisk riddlebox (n=james@75-132-225-75.dhcp.stls.mo.charter.com) |
| 17:41.59 | mvanbaak | BSD_Tech: eh ? |
| 17:42.12 | mvanbaak | not on the gxp2000's I installed |
| 17:42.24 | mvanbaak | it's working out of the box |
| 17:42.27 | BSD_Tech | ok what firmware you running |
| 17:42.55 | mvanbaak | 1.1.1.14 |
| 17:43.44 | BSD_Tech | 1.1.2.46 the current firmware things change |
| 17:43.53 | mvanbaak | ah |
| 17:44.11 | nohop | good evening... |
| 17:44.13 | nohop | i just |
| 17:44.31 | nohop | i just installed iaxmodem, which is registering and responsive and all... |
| 17:44.44 | nohop | but when i 'call' it, it doesn't give me the 'modem beep' |
| 17:44.48 | nohop | any ideas ? |
| 17:46.00 | nohop | looks like audio is going only one way (the 'modem' does detect dtmf) |
| 17:46.15 | [TK]D-Fender | nohop, Pastebin is your FRIEND. An like usually youa re asking what wrong and showing us NOTHING. Yuo must think we're all PSYCHIC here. |
| 17:46.34 | nohop | but they're both running on the same host (differnt listening ports) |
| 17:46.57 | nohop | [TK]D-Fender: calm down dude :) there's no errors in the iax output of asterisk at all... |
| 17:50.32 | *** join/#asterisk jm|laptop (n=jm|home@zen.jamiem.com) |
| 17:51.50 | nohop | anyways |
| 17:51.51 | nohop | http://pastebin.ca/607530 |
| 17:52.27 | nohop | it kinda looks like it should be all fine... |
| 17:52.50 | [TK]D-Fender | nohop, And jsut because you installed IAXModem doesn't mean its going to DO anything with the call. |
| 17:53.11 | nohop | if i call it from a phone |
| 17:53.22 | nohop | it said "RING" in minicom, attached to the tty from iaxmodem |
| 17:53.28 | nohop | and it does dial |
| 17:53.30 | nohop | it does answer |
| 17:53.56 | [TK]D-Fender | nohop, If you have a "real" modem in your srever and call it, what will happen? NOTHING. An APPLICATION has to TELL it to answer. |
| 17:53.57 | nohop | but that's all.. it doesn't transmit/receive modulated data (unless you cound dtmf) |
| 17:54.11 | nohop | the application in this case is minicom |
| 17:54.16 | nohop | it's like.. hyperterminal, but for unix |
| 17:54.45 | nohop | ats0=1 |
| 17:54.46 | nohop | OK |
| 17:54.48 | nohop | RING |
| 17:54.50 | nohop | NO CARRIER |
| 17:55.03 | [TK]D-Fender | ATS0=1 = pick up right? |
| 17:55.09 | nohop | auto answer, yeah |
| 17:55.28 | nohop | and when i call it, it answers... and the 'real' modem starts the negotiating (the beeping things) |
| 17:55.45 | nohop | but iaxmodem just doesn't seem to 'hear' it... or atleast doesn't respond to it in any way |
| 17:56.04 | nohop | it just keeps hanging there until the real modem times out and hangs up again |
| 17:56.12 | *** join/#asterisk RypPn (i=TuMbL@rosscom.demon.co.uk) |
| 17:57.08 | *** join/#asterisk jmls (n=jmls@62.49.235.130) |
| 18:03.30 | *** join/#asterisk AbsTradELic (n=vldmr@201.79.194.147) |
| 18:12.03 | *** join/#asterisk ToyMan (n=Stuart@user-12lcqol.cable.mindspring.com) |
| 18:15.06 | *** join/#asterisk Vorondil (n=vorondil@unaffiliated/vorondil) |
| 18:25.43 | *** join/#asterisk gardo (n=gardo@121.97.199.100) |
| 18:25.55 | nohop | i didn't say smth stupid again, did i ? :) |
| 18:27.27 | *** join/#asterisk bkruse_home (n=kruz@69.73.127.92) |
| 18:30.14 | Supaplex | where do I configure safe_asterisk to not run asterisk on tty9? restarting is ok, but I don't want it there. |
| 18:37.07 | *** join/#asterisk blackout_ (n=nxu7@S0106006097940f68.vw.shawcable.net) |
| 18:39.35 | blackout_ | I need to setup a simple system, call comes in, detect if number was provided ( caller id ) if not play a message and pickup digits typed in, if yes play another message and pickup digits typed in, anyone got any pointers ? |
| 18:40.28 | Supaplex | blackout_: a dialplan can do that |
| 18:41.04 | blackout_ | Supaplex, also any pointers on setting up IVR |
| 18:41.50 | Supaplex | that's an IVR |
| 18:42.21 | Supaplex | what you've described is a few lines of dialplan. cruise the asterisk wiki, or grab the oriely book |
| 18:42.49 | nohop | [TK]D-Fender: so... nothing out of the ordinairy you could find in that pastebin eithe r/ |
| 18:43.01 | wothinn | I just set up asterisk last night and I'm *way* impressed and excited... now I want to get a hardphone... not looking to spend *too* much, though, until I'm sure I'm really going to find it useful... anyone have experience with the Grandstream Budgetone phones? Will I be happy with one? |
| 18:43.20 | *** join/#asterisk yonahw (n=yonahw@84.228.98.242) |
| 18:43.27 | nohop | cause... i could always still use a hardware-modem... but all those extra 'conversions' in between doesn't sound all that appealing to me.. :) |
| 18:44.32 | Strom_M | wothinn: don't bother with those. get a polycom ip330 |
| 18:46.11 | wothinn | Those look quite nice. Hmm. |
| 18:46.53 | wothinn | nohop: Sounds like it might be a codec issue... though I may just not know what I'm talking about since I've had asterisk going for less than 24 hours. :) |
| 18:47.47 | wothinn | Have you tried making the iaxmodem do the dialing? Is it able to place a call? |
| 18:47.50 | nohop | there was a codec problem before... but asterisk was nice enough to inform me there was an 'error negotiating the codec' or something similar... so that one's solved already |
| 18:48.13 | nohop | it's able to do everything, accept calls, dial phones/modems.... |
| 18:48.36 | nohop | but once they're connected (in a dial-pickup way, not data-link), that's it... nothing happens |
| 18:49.24 | Supaplex | some codes are bandpass filtering, they'll drop stuff modems want. don't expect gsm and modems to play nice ever. |
| 18:49.41 | nohop | i know, it *says* it's talking ulaw |
| 18:50.36 | nohop | but nothing's comming through.. like, when i'm calling it through a phone, the 'modem' should beep, telling me it's there... but it's just completely silent |
| 18:51.07 | BSD_Tech | has anyone setup a outbound trace system |
| 18:51.12 | nohop | (that ip 330 looks pretty neat for that amount of money, by the way) |
| 18:51.34 | wothinn | Strom_M: quick reading says the ip330 is PoE only. I'm doing this in my home, so I don't have a switch capable of injecting PoE. Is there another phone you'd recommend? |
| 18:52.00 | Strom_M | look at the 430 then |
| 18:52.05 | Strom_M | it comes with a power brick |
| 18:52.05 | BSD_Tech | por it has a connector on the ethernet cable for power |
| 18:52.15 | Strom_M | BSD_Tech: not the new polycoms |
| 18:52.21 | BSD_Tech | ahh |
| 18:52.35 | Strom_M | wothinn: you can also get a cheap PoE injector |
| 18:53.59 | wothinn | Hmm... good point. |
| 18:55.55 | nohop | ahh, i found a forem with all kinds of people having the same problem as i have |
| 18:56.06 | nohop | none having a solution though, that's kind of a bummer :) |
| 18:56.22 | Strom_M | don't you mean a forum? |
| 18:56.35 | nohop | hehe, ofcourse i did :) |
| 18:56.54 | nohop | my typing's terrible, sorry about that |
| 18:57.21 | Strom_M | "u" is on the other side of the keyboard from "e" |
| 18:57.27 | Strom_M | it's a spelling problem, not a typo :) |
| 18:58.20 | nohop | yeah |
| 18:58.28 | nohop | it was a brain-typo rather than a physical one :) |
| 18:58.36 | mvanbaak | anyone has a macro for enum lookups in ael2 ? |
| 18:58.55 | *** join/#asterisk yonahw (n=yonahw@84.228.101.223) |
| 18:59.56 | *** join/#asterisk red9012 (n=marc3234@206-248-177-147.dsl.teksavvy.com) |
| 19:06.12 | *** join/#asterisk yonahw (n=yonahw@84.228.101.223) |
| 19:15.30 | Supaplex | is 'realtime' priority the only reason asterisk runs as root? I'm only using voip (no digium/sangoma/etc hardware) |
| 19:17.25 | nohop | i'm afk for now again, byes all |
| 19:19.40 | *** join/#asterisk file2 (n=IrcNet@asterisk/developer-and-muffin-lover/file) |
| 19:19.40 | *** mode/#asterisk [+o file2] by ChanServ |
| 19:29.49 | BSD_Tech | I thought that all the new polycoms where like the 501 that they had a poe ethernet cable that had a builtin injector and power brick |
| 19:29.51 | BSD_Tech | hmmm |
| 19:30.19 | Corydon76-home | Supaplex: Ease of use is the primary reason |
| 19:30.28 | Corydon76-home | That, and historical |
| 19:31.55 | Supaplex | I see. |
| 19:38.32 | *** join/#asterisk zotz (n=zotz@24.244.163.157) |
| 19:44.16 | *** join/#asterisk ManxPower (n=manxpowe@015-831-677.area5.spcsdns.net) |
| 19:46.18 | *** join/#asterisk errr (n=errr@fedora/errr) |
| 19:58.00 | tzafrir_laptop | Supaplex, asterisk doesn't need to actually run as root to run real-time |
| 19:58.22 | tzafrir_laptop | It nees to be executed as root, but it quickly gives up all root permissions |
| 19:59.15 | tzafrir_laptop | And if it re-execs, it won't try to do anything that requires root again (realtime, su, etc.) |
| 19:59.19 | Supaplex | spiffy. I noticed that on my other linux box. I have other issues to address before I return to that. but thanks =) |
| 19:59.38 | Supaplex | I was thinking of using capabilities to let it renice itself. |
| 20:00.40 | tzafrir_laptop | on recent linuxes (as of 2.6.12? not sure) giving up real-time does not require special permissions |
| 20:01.07 | tzafrir_laptop | asterisk needs to give up real-time for some child processes |
| 20:01.53 | tzafrir_laptop | anyway, look in asterisk.c |
| 20:02.28 | *** join/#asterisk yonahw (n=yonahw@84.228.101.223) |
| 20:11.30 | *** join/#asterisk obnauticus (n=obnautic@c-71-59-162-60.hsd1.wa.comcast.net) |
| 20:11.33 | k31th | yo |
| 20:15.01 | *** join/#asterisk sysko (n=sysko@modemcable113.9-203-24.mc.videotron.ca) |
| 20:16.23 | kingsob | is there a good gui for conference moderation? i remember someone telling me about one that could stream the conf over the net |
| 20:17.35 | *** join/#asterisk guillote_GNU (n=guillote@190.7.27.17) |
| 20:17.46 | kingsob | but that may have been that AdminParadise thing? |
| 20:25.41 | *** join/#asterisk rmayorga (n=rmayorga@unaffiliated/rmayorga) |
| 20:30.21 | *** part/#asterisk philippel (n=p_lindhe@c-24-17-254-189.hsd1.mn.comcast.net) |
| 20:40.11 | BSD_Tech | ok is there a fully fuctinal dial plan out there |
| 20:40.19 | BSD_Tech | I am goiung insane |
| 20:40.47 | BSD_Tech | has anyone writen a full dialplan for asterisk ? |
| 20:40.55 | *** join/#asterisk shido6 (n=shido6@d221-68-200.commercial.cgocable.net) |
| 20:47.48 | tzafrir_home | what's the problem? |
| 20:48.43 | tzafrir_home | BSD_Tech, voip-info.org has several links to such samples |
| 20:48.57 | tzafrir_home | but frankly, I'm not sure that they will help you |
| 20:51.11 | tzafrir_home | pastebin your current dialplan and the missing functionality |
| 20:51.38 | infowolfe | tzafrir_home, would you happen to know off the top of your head how a person would be able to force asterisk to populate mysql? :-p |
| 20:52.38 | tzafrir_home | infowolfe, asterisk does not populate mysql. Asterisk may read from mysql if properly ordered to do so |
| 20:52.47 | infowolfe | hrm |
| 20:53.04 | tzafrir_home | unless you refer to "populate"-ing with CDR records... |
| 20:53.25 | infowolfe | i've got res_mysql and cdr_mysql setup properly for my local mysql db... |
| 20:53.47 | tzafrir_home | FreePBX's web interface populates the mysql. Then dumps it into asterisk configuration |
| 20:53.58 | infowolfe | great :-p |
| 20:54.13 | tzafrir_home | they don't use res_config_mysql |
| 20:54.33 | *** join/#asterisk adorah (n=Michael@87.69.57.73.cable.012.net.il) |
| 20:55.31 | infowolfe | my issue is that freepbx is complaining about tables not being found, and yet the documentation and a thorough google comes up with no real solution |
| 20:55.47 | infowolfe | i'll just keep digging though (time to go read the source :-\ |
| 20:56.29 | *** join/#asterisk obnauticus (n=obnautic@c-71-59-162-60.hsd1.wa.comcast.net) |
| 20:59.14 | tzafrir_home | those tables should be creates by one of the install scripts. |
| 20:59.28 | tzafrir_home | Don't really remember which (the packages do it for me) |
| 20:59.42 | *** join/#asterisk ManxPower (n=manxpowe@032-462-783.area7.spcsdns.net) |
| 21:00.27 | tzafrir_home | the tables not found, or the database not exist? maybe they get the wrong name of the database? |
| 21:00.35 | tzafrir_home | anyway, as on #freepbx |
| 21:07.28 | BSD_Tech | currently I am fixing functions |
| 21:07.35 | BSD_Tech | and writing functions |
| 21:08.01 | BSD_Tech | then move to the main dial plan but its a matter of looking to get ideas of how to correct things |
| 21:13.00 | BSD_Tech | freepbx uses a perlscript to write to files |
| 21:13.10 | BSD_Tech | and the astdb |
| 21:14.19 | BSD_Tech | freepbz is nice but a pain in the long run |
| 21:14.54 | *** join/#asterisk shido6 (n=shido6@d221-68-200.commercial.cgocable.net) |
| 21:18.20 | BSD_Tech | ok here is my issue |
| 21:19.12 | BSD_Tech | I need a way so that when you change a setting remotely like some of the functions I have written can |
| 21:19.37 | BSD_Tech | to have it verify its the exten owner changing the function and not some one else |
| 21:20.39 | BSD_Tech | I know it can use vmpasswd checking but how to make it verify the exten |
| 21:21.08 | BSD_Tech | like say I am exten 200 but I am at 400 working with co worker on a project |
| 21:21.27 | BSD_Tech | and I dial *40 to do a custom call forward |
| 21:21.58 | BSD_Tech | it should ask me to verify then ask me to change the function |
| 21:23.04 | BSD_Tech | but I cant get it to work |
| 21:23.09 | *** join/#asterisk DrAk0 (n=ljd@nelug/coreteam/luisjose) |
| 21:25.53 | *** join/#asterisk vgster (n=vgster@cpc2-ledn1-0-0-cust826.leed.cable.ntl.com) |
| 21:29.45 | tzafrir_laptop | BSD_Tech, could the extension owner call from another extension for that? |
| 21:29.52 | [TK]D-Fender | BSD_Tech, store user/pass in a DB and there you go, duh! |
| 21:30.59 | BSD_Tech | tzafrir, YES. THE IDEA IS THIS |
| 21:31.03 | BSD_Tech | sorry |
| 21:32.43 | BSD_Tech | it is going to read the voicemail.conf for exten and passwd auth |
| 21:33.15 | [TK]D-Fender | BSD_Tech, Ok, there's *1* line of dialplan required... whats the problem? |
| 21:34.14 | BSD_Tech | how |
| 21:34.21 | BSD_Tech | let me show you |
| 21:34.29 | [TK]D-Fender | BSD_Tech, "show application vmauthenticate" <----------------------- |
| 21:35.18 | BSD_Tech | http://pastebin.ca/607737 |
| 21:37.33 | [TK]D-Fender | BSD_Tech, "foo" is unnecessary. Also your forward exten is not validated |
| 21:38.45 | BSD_Tech | so you thingk it should read it back and say if correct press 1 else goto start |
| 21:39.21 | [TK]D-Fender | BSD_Tech, confirmation is nice, but proving its VALID is more important. |
| 21:39.34 | [TK]D-Fender | BSD_Tech, So that calls don't get lost into dead space |
| 21:40.16 | BSD_Tech | so have it check to make sure the exten exist you forwaring to |
| 21:40.21 | BSD_Tech | exist |
| 21:40.27 | [TK]D-Fender | correct |
| 21:40.31 | BSD_Tech | else goto restart |
| 21:40.39 | BSD_Tech | now I am really lost |
| 21:41.00 | BSD_Tech | ok so it would have to read and check astdb |
| 21:41.05 | [TK]D-Fender | And this is su-20 lines of dialplan! |
| 21:41.08 | BSD_Tech | for sip/ |
| 21:41.15 | [TK]D-Fender | no it wouldn't....... |
| 21:41.20 | BSD_Tech | ? |
| 21:41.42 | BSD_Tech | I am trying to reallearn to write dial plan and understand |
| 21:41.45 | [TK]D-Fender | SIP are DEVICES, you forward in a sense to extens so all you have to do is validate the exten is valid. |
| 21:43.13 | BSD_Tech | man I wish there was a really good handbook for asterisk 1.4 and writing dial plans |
| 21:43.15 | BSD_Tech | lol |
| 21:43.18 | BSD_Tech | ok |
| 21:43.39 | BSD_Tech | the foo line should be taken out then |
| 21:44.30 | kombi | can I outline a challenge here and you tell me whether I am completely nuts or not? |
| 21:44.45 | kombi | yum |
| 21:45.22 | BSD_Tech | now I have to think this over again |
| 21:45.30 | BSD_Tech | I am lost in dialplan land |
| 21:45.37 | [TK]D-Fender | kombi, CHALLENGE?! Its a "no contest" plea ;) |
| 21:45.51 | [TK]D-Fender | BSD_Tech, this has nothing to do with 1.4 |
| 21:46.10 | [TK]D-Fender | BSD_Tech, suck that FOO outta there! |
| 21:46.20 | BSD_Tech | the whole line |
| 21:46.27 | [TK]D-Fender | BSD_Tech, no jsut the WORD |
| 21:46.39 | *** join/#asterisk mltlnx (n=mltlnx@cpe-69-203-218-147.nyc.res.rr.com) |
| 21:47.14 | BSD_Tech | exten = *40,n,Set(fromext=$/{IF($["${fromext}"=""]?${CALLERID(number)}:${fromext})}) |
| 21:48.16 | BSD_Tech | that does not look right |
| 21:49.38 | mltlnx | quick question... I have a few customers that currently have T1's with channel banks. What would i need equipment wise to build out a voice T1 at our colo so that I can provide voice service to them? |
| 21:50.11 | mltlnx | bit off topic...i know |
| 21:50.24 | [TK]D-Fender | BSD_Tech, exten = *40,n,Set(fromext=${IF($["${fromext}"=""]?${CALLERID(num)}:${fromext})}) |
| 21:51.37 | BSD_Tech | TK you do get what I am working to do right |
| 21:52.03 | kombi | Here it comes: guy dials into system and goes on the air of a web radio via ices (easy, done), he then invites others into the conference by clicking on their phone number in a web interface. I managed to get a conference into ices, but don't know how to traverse from the former to the latter. Now, am I nuts to even want that or not? |
| 21:52.28 | BSD_Tech | now to make it verify the user changing it is the exten owner |
| 21:52.33 | kombi | mltlnx: digium hardware I would guess |
| 21:52.55 | *** join/#asterisk hfb (n=hfb@75.80.37.175) |
| 21:53.13 | [TK]D-Fender | BSD_Tech, as of that step you are asking which "extension" to forward. |
| 21:53.52 | BSD_Tech | right it ask which exten to forward |
| 21:54.06 | BSD_Tech | then it needs to verify that its the exten owner |
| 21:54.21 | [TK]D-Fender | BSD_Tech, "show application vmauthenticate" <----------------------- |
| 21:54.25 | BSD_Tech | before allowing them to do the function |
| 21:56.30 | BSD_Tech | exten = *40,n,vmauthenticate(${fromext}) |
| 21:56.50 | BSD_Tech | correct |
| 21:57.12 | BSD_Tech | or is it |
| 21:57.24 | BSD_Tech | exten = *40,n,vmauthenticate(${fromext}@default) |
| 21:58.53 | *** join/#asterisk JuliusSpencer (n=julius@60-234-130-224.bitstream.orcon.net.nz) |
| 21:59.03 | BSD_Tech | the issue there is that with 1.4.x and using user.conf it does not set the info in voicemail.conf |
| 21:59.23 | BSD_Tech | so then it would not work |
| 21:59.53 | BSD_Tech | or does it read from the users exten info in users.conf |
| 22:00.28 | *** join/#asterisk Vorondil (n=vorondil@unaffiliated/vorondil) |
| 22:00.39 | BSD_Tech | tk ? |
| 22:00.58 | [TK]D-Fender | BSD_Tech, how about you TRY it, and READ? :) |
| 22:01.20 | BSD_Tech | I am reading but it says it reads from voicemail.conf |
| 22:02.31 | BSD_Tech | this will be a issue |
| 22:02.48 | BSD_Tech | since this will be going on asterisk now boxes when done |
| 22:03.59 | kombi | I broke it down somewhat: can one page others from an existing conference? |
| 22:04.31 | ManxPower | I'll bet AsteriskNOW is not designed to be customized. |
| 22:05.05 | BSD_Tech | it worked |
| 22:05.12 | [TK]D-Fender | kombi, Page simply DIALS. |
| 22:05.24 | *** join/#asterisk simonkern (n=simonker@p54AA9ACA.dip0.t-ipconnect.de) |
| 22:05.25 | BSD_Tech | so the info in the show application needs to be updated |
| 22:05.38 | simonkern | hi |
| 22:05.48 | BSD_Tech | it does read the passwd fron users.conf |
| 22:05.50 | BSD_Tech | cool |
| 22:06.02 | simonkern | unicode? |
| 22:06.04 | BSD_Tech | Thanks TK |
| 22:06.13 | kombi | Fender: I understand that, can one dial from an existing conference? |
| 22:06.47 | [TK]D-Fender | kombi, how the hell do you dial FROM a "conference"?! You dial from a PHONE. |
| 22:07.00 | JuliusSpencer | hi.. I'm having some trouble running the ztcfg command. I get an error: ZT_CHANCONFIG failed on channel 1: No such device or address (6) |
| 22:07.05 | JuliusSpencer | Has anyone seen this before? |
| 22:07.06 | [TK]D-Fender | kombi, And No, each call to page is its own unique little conference |
| 22:07.14 | simonkern | Does anyone run sphinx together with asterisk? |
| 22:07.20 | BSD_Tech | TK ROCKS |
| 22:07.23 | kombi | Fender: hmm.. |
| 22:07.38 | BSD_Tech | now I need sound files |
| 22:07.42 | simonkern | I'm searching for an good howto or more information |
| 22:07.44 | BSD_Tech | to match |
| 22:07.50 | tzafrir_home | JuliusSpencer, what do you see on /proc/zaptel/1 ?Do you see there channel 1? |
| 22:08.07 | tzafrir_home | JuliusSpencer, what device is it? |
| 22:08.24 | kombi | Fender: could you quickly read over my highly complicated yet enormously interesting scenario further up? |
| 22:08.54 | JuliusSpencer | hi tzafrir, ls /proc/zaptel/ comes up empty... |
| 22:09.12 | JuliusSpencer | tzafrir, the dir exists, but nothing in it |
| 22:09.25 | tzafrir_home | the fact that there is /proc/zaptel means that zaptel (the module) is loaded. |
| 22:09.30 | [TK]D-Fender | kombi, You want * to call out to invite people to a conference? |
| 22:09.39 | kombi | ahm.. yes |
| 22:09.47 | JuliusSpencer | tzafrir, a tdm400p |
| 22:10.00 | [TK]D-Fender | kombi, Well Page has NO purpose in this. |
| 22:10.03 | tzafrir_home | JuliusSpencer, but no span is registered. Your card has not been detected or something |
| 22:10.14 | kombi | Fender: I feared that.. |
| 22:10.21 | [TK]D-Fender | kombi, Have it make a ".call file" or AMI Originate to pull them in. |
| 22:10.31 | tzafrir_home | modprobe wctdm |
| 22:10.32 | [TK]D-Fender | kombi, relatively easy |
| 22:10.48 | JuliusSpencer | tzafrir, how would I know if it had been detected? |
| 22:11.03 | tzafrir_home | JuliusSpencer, any change from 'modprobe wctdm'? |
| 22:11.08 | JuliusSpencer | tzafrir, it's in lspci as expected (or shown in the manual) |
| 22:11.18 | kombi | Fender: that is good news to me.. |
| 22:11.37 | tzafrir_home | If not, rmmod wctdm; modprobe wctdm; dmesg | tail |
| 22:11.37 | JuliusSpencer | tzafrir, when you say change, you mean if I do it twice in a row? |
| 22:11.38 | tzafrir_home | ~pb |
| 22:11.39 | jbot | A Pastebin is a place to paste your stuff without flooding the channel. Here are links to a few : http://pastebin.ca , http://channels.debian.net/paste , http://paste.lisp.org |
| 22:11.45 | JuliusSpencer | ah k |
| 22:11.57 | kombi | (beginning to get desperate..) along what lines would the originate command be? |
| 22:12.06 | tzafrir_home | I mean: something showed up in /proc/zaptel ? |
| 22:12.27 | JuliusSpencer | tzafrir, Zapata Telephony Interface Registered on major 196? |
| 22:12.29 | ManxPower | kombi: Originate is used with AMI (Asterisk Manager Interface). What you want to do is NOT "trivial"/ |
| 22:12.55 | ManxPower | i.e. you have to write a program to connect to AMI and issue commands to dial people, and place them into a conference. |
| 22:13.02 | tzafrir_home | JuliusSpencer, that is from the module zaptel itself, IIRC |
| 22:13.12 | ManxPower | Maybe have the person press a number to accept the conference invite, etc. |
| 22:13.37 | kombi | ManxPower: oh, I thought originate happened in CLI.. AMI is manager, right? |
| 22:14.02 | tzafrir_home | JuliusSpencer, any messages from wctdm or something? |
| 22:14.28 | JuliusSpencer | tzafrir, hmmm no, you're right that's just the zaptel stuff |
| 22:14.48 | JuliusSpencer | do you happen to know what I might expect to see? |
| 22:14.56 | tzafrir_home | can you provide the output of the command(s) I wrote earlier? |
| 22:15.04 | tzafrir_home | rmmod wctdm; modprobe wctdm; dmesg | tail |
| 22:15.06 | BSD_Tech | google it |
| 22:15.06 | kombi | ManxPower: never mind, you just said it.. |
| 22:15.10 | JuliusSpencer | yeah, here or should we get another channel going? |
| 22:15.56 | JuliusSpencer | tzafrir, do you know how to get another channel going? |
| 22:15.57 | tzafrir_home | in #paste in in a pastebin (see jbot's message above) |
| 22:16.23 | tzafrir_home | s/in/or/ |
| 22:16.41 | tzafrir_home | duh |
| 22:16.41 | kombi | ManxPower, Fender: but to decide in which direction to investigate, what is easier/better to be invoked from an application server such as php, AMI or .call? |
| 22:17.17 | kombi | or should I say, better documented |
| 22:17.40 | BSD_Tech | ok TK input now |
| 22:17.44 | tzafrir_home | call files are basically simpler, though there's a matter of permissions. And they are a bit more limited |
| 22:17.49 | [TK]D-Fender | kombi, Either |
| 22:17.50 | JuliusSpencer | tzafrir, sorry, I'll give it a go... justnot done this before |
| 22:17.59 | BSD_Tech | how to go about having it verify the end exten |
| 22:18.23 | BSD_Tech | would it not check the astdb |
| 22:18.43 | [TK]D-Fender | kombi, Go check out the WIKI, and get off your ass and TRY some of this! |
| 22:18.50 | [TK]D-Fender | BSD_Tech, Nope, verify against the dialplan. |
| 22:18.54 | JuliusSpencer | I don't see jbot's message. I think I've started a channel called #paste |
| 22:18.56 | JuliusSpencer | heh |
| 22:19.09 | BSD_Tech | ? |
| 22:19.11 | [TK]D-Fender | JuliusSpencer, : |
| 22:19.11 | kombi | Fender: I'm off my bud and trying all the time..;) |
| 22:19.12 | [TK]D-Fender | ~pb |
| 22:19.12 | jbot | A Pastebin is a place to paste your stuff without flooding the channel. Here are links to a few : http://pastebin.ca , http://channels.debian.net/paste , http://paste.lisp.org |
| 22:19.12 | BSD_Tech | hmm |
| 22:19.13 | [TK]D-Fender | ^^^^^^^^^^^^^^^^^^^ |
| 22:19.39 | [TK]D-Fender | kombi, then be QUIET about it and we'll expect to hear from you after you've made some reasonable attempts. |
| 22:20.16 | kombi | Fender: lol, ok, I shut up then, btw, anyone know the John Spencer Blues Explosion? |
| 22:20.59 | JuliusSpencer | tzafrir, I've gone to the URL and pasted, do I now put in here the URL to go to to see it? |
| 22:21.12 | BSD_Tech | ok trying to grep tk |
| 22:21.39 | BSD_Tech | I dont want to take you from your project I am just trying to learn to better my dialplan writing |
| 22:21.41 | tzafrir_home | sorry. That channel is called #flood |
| 22:21.43 | kombi | JuliusSpencer: you put the URL here |
| 22:21.48 | JuliusSpencer | http://pastebin.ca/607814 |
| 22:22.39 | j0 | i just upgraded from 1.2.18 to 1.2.20 and now it's dropping calls! HELP!! |
| 22:22.40 | j0 | Jul 7 15:20:59 WARNING[2864]: chan_sip.c:1228 retrans_pkt: Maximum retries exceeded on transmission e5ba7f2a-93b9c1b3@localhost for seqno 102 (Critical Response) |
| 22:22.40 | j0 | Jul 7 15:20:59 WARNING[2864]: chan_sip.c:1245 retrans_pkt: Hanging up call e5ba7f2a-93b9c1b3@localhost - no reply to our critical packet. |
| 22:22.43 | j0 | that's what i'm seeing |
| 22:22.52 | [TK]D-Fender | BSD_Tech, next hint : "show application chanisavail" <-------------- |
| 22:23.32 | JuliusSpencer | hi tzafrir, did you manage to see that post? |
| 22:23.58 | tzafrir_home | hmmm... no messages |
| 22:24.07 | tzafrir_home | JuliusSpencer, yes, I read it |
| 22:24.22 | tzafrir_home | just to be sure: lsmod | grep wctdm |
| 22:24.34 | tzafrir_home | this shows you one line now, right |
| 22:24.43 | tzafrir_home | this mean that the module wctdm is loaded |
| 22:25.37 | *** join/#asterisk r0d3nt (i=nobody@foster.stonedcoder.org) |
| 22:25.43 | JuliusSpencer | tzafrir, k I've put that in the postbin page... |
| 22:25.51 | JuliusSpencer | tzafrir_home, it looks like it loaded |
| 22:26.01 | JuliusSpencer | tzafrir_home, (to me :) ) |
| 22:26.26 | BSD_Tech | ChanIsAvail(LOCAL/${toext}) |
| 22:26.41 | tzafrir_home | so now: rmmod wctdm; lsmod | grep wctdm |
| 22:26.52 | tzafrir_home | now you don't see it loaded, right? |
| 22:26.59 | JuliusSpencer | nothing |
| 22:27.07 | JuliusSpencer | tzafrir_home, (which is expected I guess) |
| 22:27.20 | JuliusSpencer | yeah |
| 22:27.35 | JuliusSpencer | tzafrir_home, I think the loading is fine, it's the ztcfg command which is giving the issue. |
| 22:28.26 | JuliusSpencer | tzafrir_home, at least that's my take on it. If I have no fxo or fxs settings in my zaptel.conf then the error doesn't occur. |
| 22:28.31 | ManxPower | j0: Downgrade back to the version that was working. |
| 22:28.35 | tzafrir_home | no. If it has loaded fine, you would have a channel (and this would be demostrated by something on /proc/zaptel) |
| 22:29.16 | tzafrir_home | JuliusSpencer, if you have nothing there than ztcfg doesn't attempt to configure anything. |
| 22:29.16 | JuliusSpencer | tzafrir_home, ah right. |
| 22:29.20 | ManxPower | tzanger: and if he did not have any channels defined? |
| 22:29.36 | tzafrir_home | just a sanity check: ls /sys/class/zaptel |
| 22:29.41 | tzafrir_home | any zap1 there? |
| 22:30.00 | ManxPower | chances are you are confused about the signalling for the ports. |
| 22:30.07 | ManxPower | remember FXO ports use FXS signaling. |
| 22:30.24 | JuliusSpencer | 5 things. in the pastebin |
| 22:30.26 | tzafrir_home | but for that you need a port |
| 22:30.53 | tzafrir_home | JuliusSpencer, which address? it's a new one for each post |
| 22:31.00 | JuliusSpencer | oh :) |
| 22:31.11 | JuliusSpencer | http://pastebin.ca/607828 |
| 22:32.00 | tzafrir_home | after an 'rmmod wctdm' it is gone from the output of lsmod, right? |
| 22:32.36 | *** join/#asterisk bkruse_home (n=kruz@69.73.127.92) |
| 22:32.44 | *** part/#asterisk bkruse_home (n=kruz@69.73.127.92) |
| 22:33.08 | JuliusSpencer | tzafrir_home, uh... not sure I follow. What should I be looking for that won't exist after anrmmod? |
| 22:34.05 | JuliusSpencer | tzafrir_home, if you mean wctdm, it is gone yes. |
| 22:34.08 | tzafrir_home | rmmod wctdm ; lsmod | grep wctdm |
| 22:34.25 | JuliusSpencer | yeah that's definitely |
| 22:34.27 | JuliusSpencer | gone |
| 22:34.28 | tzafrir_home | BTW: do you copy commands from here directly to the terminal, or do you copy them maunally? |
| 22:34.45 | JuliusSpencer | I use copy paste |
| 22:34.45 | *** join/#asterisk lowlevel (n=Stuart@CPE0017f2e2a3e8-CM000f9f7d6742.cpe.net.cable.rogers.com) |
| 22:34.54 | ManxPower | JuliusSpencer: did you put your /etc/zaptel.conf on pastebin? |
| 22:35.04 | tzafrir_home | it's gone. So now let's try a modprobe again: |
| 22:35.09 | tzafrir_home | ManxPower, it is irrelevant |
| 22:35.15 | ManxPower | tzanger: why? |
| 22:35.25 | *** join/#asterisk _DAW (n=_DAW@adsl-074-185-215-060.sip.msy.bellsouth.net) |
| 22:35.31 | ManxPower | the module is loading. It looks like a config issue to me. |
| 22:35.41 | ManxPower | Maybe he has an IRQ conflict |
| 22:35.43 | tzafrir_home | because wctdm does not bring up any channel. That's the error |
| 22:36.12 | BSD_Tech | tk this look right |
| 22:36.14 | ManxPower | JuliusSpencer: Did you plug power into the card? |
| 22:36.14 | BSD_Tech | exten = *40,n,ChanIsAvail(LOCAL/${toext}?set:startread) |
| 22:36.15 | tzafrir_home | I'm trying to see what the module has to say. So far it has been surprisingly silent |
| 22:36.25 | j0 | so is 1.2.20 ready to be used in production systems? |
| 22:36.35 | JuliusSpencer | no... can do :) it's the standard one with 3 changes: fxoks=3,4 fxsks=1,2 loadzone = nz |
| 22:36.36 | tzafrir_home | modprobe wctdm ; dmesg | tail |
| 22:36.36 | ManxPower | j0: Who knows. It is so new. |
| 22:36.53 | ManxPower | j0: But if you upgrade and it breaks something then downgrade back to what works. |
| 22:36.57 | JuliusSpencer | ManxPower, yes I checked twice having found that in a google post somewhere |
| 22:37.03 | ManxPower | For production systems, of course. |
| 22:37.37 | ManxPower | JuliusSpencer: you do not want the standard one. |
| 22:37.42 | [TK]D-Fender | BSD_Tech, does that LOOK like a valid set of parameters? |
| 22:37.43 | JuliusSpencer | dmesg doesn't show anything new when doing modprobe wctdm |
| 22:37.48 | ManxPower | It is not meant to work, it is meant to show all the options |
| 22:38.26 | ManxPower | JuliusSpencer: you checked it using "cat /proc/interrupts when wctdm is loaded? |
| 22:39.16 | tzafrir_home | ManxPower, so why is nothing at all printed? |
| 22:39.31 | JuliusSpencer | I'm not sure what I'm supposed to look for in the interrupts |
| 22:39.37 | JuliusSpencer | nothing looks related to the card there |
| 22:39.47 | tzafrir_home | the driver should print at least something even if it doesn't find hardware, right? |
| 22:39.50 | ManxPower | JuliusSpencer: then you have a major problem |
| 22:39.58 | ManxPower | tzanger: no! |
| 22:40.01 | ManxPower | ..er.. |
| 22:40.05 | tzafrir_home | kernel logging level or something? |
| 22:40.09 | ManxPower | tzafrir_home: no |
| 22:40.24 | ManxPower | I believe the driver will happily load even if there is no card. |
| 22:40.28 | tzafrir_home | JuliusSpencer, are you in hte console? |
| 22:40.38 | JuliusSpencer | heh yeah well.. sshd in |
| 22:40.39 | ManxPower | try modprobe one of the other kernel card modules |
| 22:40.45 | BSD_Tech | grrr |
| 22:40.50 | BSD_Tech | ok |
| 22:40.57 | JuliusSpencer | ManxPower, kk which one should I try to load? |
| 22:41.11 | ManxPower | JuliusSpencer: if wctdm is now shown in the output of "cat /proc/interrupts" when the card is loaded then you either have a defective card or an incompatible motherboard |
| 22:41.21 | BSD_Tech | it failed |
| 22:41.38 | JuliusSpencer | ManxPower, I'll post the interrupts in case it is there, but I don't see it |
| 22:41.39 | ManxPower | JuliusSpencer: pick one from the zaptel readme. |
| 22:41.43 | JuliusSpencer | k |
| 22:41.49 | ManxPower | JuliusSpencer: With the kernel driver loaded. |
| 22:42.21 | JuliusSpencer | http://pastebin.ca/607851 |
| 22:42.57 | JuliusSpencer | ManxPower, the post I've put in the pastebin is with the wctdm loaded |
| 22:43.18 | JuliusSpencer | (wcte11xp is also loaded) |
| 22:43.22 | ManxPower | JuliusSpencer: Did you plug the power cable into the card. |
| 22:43.30 | JuliusSpencer | ManxPower, yep I checked twice |
| 22:43.40 | tzafrir_home | nada |
| 22:43.42 | JuliusSpencer | I could check the cable I guess with a volt meter |
| 22:44.01 | tzafrir_home | hmmm... what other thing would trigger a line in dmesg? |
| 22:44.04 | ManxPower | JuliusSpencer: move the card into another slot |
| 22:44.12 | JuliusSpencer | just to be sure it has something to give to the card |
| 22:44.16 | tzafrir_home | I wonder if it is logged at all |
| 22:44.39 | tzafrir_home | try, e.g: connecting/disconnecting a USB device |
| 22:44.48 | tzafrir_home | I suspect nothing is logged in the kernel |
| 22:44.50 | BSD_Tech | tk not greping this on |
| 22:44.54 | JuliusSpencer | I'm a bit confused. It seems like the module is loading without trouble. |
| 22:45.09 | ManxPower | JuliusSpencer: the module will load even if there is no card. |
| 22:45.10 | JuliusSpencer | k I'll plug a mouse in |
| 22:45.13 | JuliusSpencer | 1 tixk... |
| 22:45.15 | ManxPower | It is one of the annoying oddities |
| 22:46.24 | JuliusSpencer | http://pastebin.ca/607868 |
| 22:46.26 | BSD_Tech | re reading |
| 22:46.49 | ManxPower | JuliusSpencer: Move. The. Card. To. A. Different. Slot. |
| 22:47.05 | JuliusSpencer | ok I'll do that again... give me 5 as I'll need to power off... back in a bit |
| 22:47.35 | JuliusSpencer | I believe it's a sw issue... |
| 22:48.55 | BSD_Tech | [Jul 7 15:48:19] WARNING[7980]: chan_local.c:134 local_devicestate: Someone used Local/10000 somewhere without a @context. This is bad. |
| 22:49.38 | j0 | hmm.. it seems as if someone hits a dtmf key before the call is connected, i get the error Maximum retries exceeded on transmission e5ba7f2a-93b9c1b3@localhost for seqno 102 (Critical Response) and Hanging up call e5ba7f2a-93b9c1b3@localhost - no reply to our critical packet. |
| 22:51.45 | *** join/#asterisk RabidW (n=RabidW@adsl-68-95-198-172.dsl.wlfrct.sbcglobal.net) |
| 22:52.06 | k31th | BSD_Tech: hows it going |
| 22:52.18 | BSD_Tech | closer to getting a function right |
| 22:52.23 | BSD_Tech | but not there yet |
| 22:52.32 | k31th | with asterisknow ? |
| 22:52.57 | j0 | well i've figured out the problem at least.. but grr... makes me wonder when microsoft's voip server comes out.. it couldn't cause me THIS much stress |
| 22:53.12 | k31th | i tried installing that this afternoon... couldnt get my inbound / outbound stuff working with my crappy analog card |
| 22:53.14 | RabidW | Hi, I'm wondering if anyone has recommended smart phones for working with asterisk. I see some success stories with the E60 but that looks a little bulky for me (wasn't a huge fan of the BB). |
| 22:53.20 | k31th | which is basically a win modem |
| 22:53.50 | tzafrir_home | an x100p ? |
| 22:54.21 | k31th | yeah |
| 22:54.48 | RabidW | s/E60/E61/ |
| 22:55.03 | RabidW | hah, that's a pretty cool script |
| 22:55.05 | k31th | so im putting debian on... src compiling asterisk 1.4 and then see if i can get it working from scratch. |
| 22:55.21 | tzafrir_home | btw: if you're not in the US, and you have an echo problem with the x100p, try http://www.rowetel.com/ucasterisk/oslec.html |
| 22:55.36 | k31th | im in the UK |
| 22:56.09 | tzafrir_home | may slightly help |
| 22:56.20 | *** join/#asterisk d00gster (n=doughant@bas1-toronto12-1128667111.dsl.bell.ca) |
| 22:56.47 | *** join/#asterisk juanmanuel (n=jmacz@201.244.174.77) |
| 22:56.52 | BSD_Tech | ok TK I am stumped on this one |
| 22:57.05 | *** part/#asterisk juanmanuel (n=jmacz@201.244.174.77) |
| 23:01.52 | tzafrir_home | k31th, btw: have you considered using ISDN? |
| 23:02.11 | BSD_Tech | exten = *40,n,ChanIsAvail(LOCAL/${toext}) |
| 23:02.11 | BSD_Tech | exten = *40,n,GotoIF(${AVAILCHAN}="${toext}"|?set:startread) |
| 23:02.23 | tzafrir_home | beats using analog... |
| 23:05.05 | k31th | tzafrir_home: will be for any business just got this card for a test + 999 / 911 calls |
| 23:05.36 | BSD_Tech | did not work |
| 23:05.45 | BSD_Tech | tk next hint |
| 23:05.52 | BSD_Tech | I am stumped |
| 23:08.31 | *** join/#asterisk andyd (n=andyd@212.183.134.131) |
| 23:10.44 | *** join/#asterisk mltlnx (n=mltlnx@cpe-69-203-218-147.nyc.res.rr.com) |
| 23:16.05 | BSD_Tech | they dont have e999 in eu |
| 23:18.24 | k31th | 999 is your 911 |
| 23:18.33 | crimethinker | 112 |
| 23:19.02 | ManxPower | BSD_Tech: I suspect that Local/ channels are always available |
| 23:19.20 | BSD_Tech | ok |
| 23:19.43 | ManxPower | But if we saw a pastebin of the CLI output I might see something |
| 23:20.50 | ManxPower | Adding a Noop(AVAILCHAN=${AVAILCHAN}) between the two lines you pasted would also help |
| 23:21.09 | ManxPower | BSD_Tech: I take it you are not a programmer |
| 23:21.19 | BSD_Tech | no |
| 23:21.36 | BSD_Tech | I have been learning php the last few weeks |
| 23:21.47 | ManxPower | debugging dialplans and debugging programs are really pretty similar in the basic concepts |
| 23:21.57 | BSD_Tech | but relearning to do dial plan |
| 23:23.03 | ManxPower | For one thing xten = *40,n,GotoIF(${AVAILCHAN}="${toext}"|?set:startread) will never work the way you expect |
| 23:23.15 | ManxPower | If you have quotes on one side, you need them on the other side on the = |
| 23:23.21 | *** join/#asterisk phocus (n=phocus@c-75-65-161-101.hsd1.ms.comcast.net) |
| 23:23.52 | ManxPower | I doubt that AVAILCHAN will ever be equal to ${toext} anyway, even if you could use chanisavail with Local/ channels |
| 23:23.59 | BSD_Tech | <PROTECTED> |
| 23:23.59 | BSD_Tech | [Jul 7 16:23:12] WARNING[8209]: chan_sip.c:2787 create_addr: No such host: 999 |
| 23:23.59 | BSD_Tech | [Jul 7 16:23:12] WARNING[8209]: chan_iax2.c:2681 create_addr: No such host: 999 |
| 23:23.59 | BSD_Tech | <PROTECTED> |
| 23:24.12 | ManxPower | BSD_Tech: you know better than to flood the channel. |
| 23:24.32 | phocus | hey guyes, i want to go and get an analog adapter from walmart , like alinksys or something, wich is the easiest/best to get real quick? |
| 23:24.45 | phocus | and use it with asterisk |
| 23:24.54 | ManxPower | BSD_Tech: do you HAVE a [999] section in sip.conf? |
| 23:25.13 | BSD_Tech | no and its not chacking users.conf |
| 23:25.32 | ManxPower | phocus: anything you buy from walmart will be locked to the provider. |
| 23:25.53 | ManxPower | BSD_Tech: If 999 is not listed in sip show peers then you can't use it |
| 23:26.16 | BSD_Tech | ok then how to do this with users.conf |
| 23:26.25 | BSD_Tech | and no there is no 999 exten |
| 23:26.42 | ManxPower | you are not checking for a 999 extension, you are checking for a 999 SIP user. |
| 23:26.54 | BSD_Tech | right |
| 23:27.03 | ManxPower | BSD_Tech: If you can't Dial(SIP/999) then you can't ChanIsAvail it. |
| 23:28.13 | ManxPower | BSD_Tech: Oh and remove srvlookup=yes from sip.comf |
| 23:29.02 | ManxPower | phocus: no |
| 23:29.12 | ManxPower | mail order it from someplace like Voxzilla.com |
| 23:29.48 | phocus | thanks!! |
| 23:29.59 | BSD_Tech | ManxPower, http://pastebin.ca/607916 this is what I am working on |
| 23:31.03 | ManxPower | BSD_Tech: we won't be at a point where the dialplan is useful for a LONG time. |
| 23:31.11 | ManxPower | Can you or can you not Dial(SIP/999) |
| 23:31.27 | BSD_Tech | there is no 999 |
| 23:31.39 | ManxPower | then why are you specifying it? |
| 23:32.00 | BSD_Tech | the idea is to have it check if the user exten exist if no then ask them to start over otherwise set it |
| 23:32.06 | ManxPower | <PROTECTED> |
| 23:32.39 | ManxPower | That might be the idea, but that is not what you are telling your dialplan to do. |
| 23:32.51 | BSD_Tech | ok |
| 23:32.58 | ManxPower | ChanIsAvail(Local/999) if there is a exten => 999 |
| 23:33.22 | BSD_Tech | I changed it hold on |
| 23:34.25 | BSD_Tech | http://pastebin.ca/607920 |
| 23:34.26 | ManxPower | And WHY are you not just letting the user dial the extension, if it is invalid, catch it with exten => i and loop back. |
| 23:34.38 | ManxPower | add a counter to keep the user from trying all day to find an extension |
| 23:34.55 | ManxPower | And what is the CLI output. |
| 23:35.16 | BSD_Tech | I am doing this setp by step |
| 23:35.22 | ManxPower | no you are not. |
| 23:35.24 | BSD_Tech | get it working then add loop count |
| 23:35.25 | ManxPower | you have a page long dialplan |
| 23:35.47 | BSD_Tech | this is just 1 function I am rewriting |
| 23:35.53 | BSD_Tech | to relearn |
| 23:36.14 | ManxPower | ChanIsAvail(SIP/${toext}&IAX2/${toext}) |
| 23:36.32 | ManxPower | ${toext} had better have the SIP and IAX2 device account names, not an extension |
| 23:36.37 | BSD_Tech | its checking to see if the channel exist |
| 23:36.49 | BSD_Tech | the exten exist |
| 23:37.06 | BSD_Tech | and if not exist then it wont let them set ti |
| 23:37.08 | BSD_Tech | it |
| 23:37.11 | ManxPower | BSD_Tech: Do you understand the difference between an extension and a sip or iax account/peer name? |
| 23:37.34 | BSD_Tech | yes |
| 23:37.40 | ManxPower | ChanIsAvail(SIP/${toext}&IAX2/${toext}) This is checking the SIP and IAX account/ID, not an extension |
| 23:37.51 | BSD_Tech | the idea is it to make sure the user exten exist they are forwarding to |
| 23:38.05 | ManxPower | BSD_Tech: Please put down the crack pipe. |
| 23:38.37 | ManxPower | You CANNOT use ChanIsAvail(SIP/${toext}) to test if an extension exists. |
| 23:38.54 | BSD_Tech | TK told me to read and use it |
| 23:38.59 | ManxPower | chan is avail only tests to see if a CHANNEL (for SIP and IAX that is the device/account ID, for Zap it is the channel) |
| 23:39.01 | BSD_Tech | so TK was wroig |
| 23:39.24 | Corydon76-home | You probably misunderstood him |
| 23:39.32 | BSD_Tech | maybe your not understanding what I am doing |
| 23:39.45 | tzafrir_home | so explain |
| 23:39.51 | ManxPower | BSD_Tech: What you are doing is checking your tire pressure by changing the locks |
| 23:39.58 | ManxPower | IT makes no sense. |
| 23:40.08 | BSD_Tech | the idea is this |
| 23:40.09 | ManxPower | If you want to check the tire pressure then check the tire pressure, don't change the locks |
| 23:40.14 | BSD_Tech | I am exten 1000 |
| 23:40.23 | BSD_Tech | I am at my coworkers desk |
| 23:40.54 | BSD_Tech | I pickup dial *40 and it ask me to input the exten then it ask for my password to verify its me |
| 23:40.57 | ManxPower | What is your co-workers extension |
| 23:41.06 | Corydon76-home | You are not exten 1000. You have a device at your desk which responds to the same name as extension 1000 dials |
| 23:41.10 | BSD_Tech | 1005 |
| 23:41.37 | ManxPower | BSD_Tech: you are living proof why it is bad to name your devices the same as your extension |
| 23:41.52 | BSD_Tech | talk to the coders of the gui |
| 23:41.55 | ManxPower | BSD_Tech: Good. So you want asterisk to verify that extension 1000 exists, right? |
| 23:41.57 | *** join/#asterisk pepeu (n=federico@189.167.92.21) |
| 23:42.06 | BSD_Tech | I told them that and bkruse arguues its not |
| 23:42.09 | ManxPower | BSD_Tech: You have wasted everyone's time if you use a GUI |
| 23:42.24 | Corydon76-home | You can't verify that extension 1000 exists without dialling 1000 |
| 23:42.29 | BSD_Tech | I am trying to write a dial plan to work with the asterisk-gui |
| 23:42.41 | ManxPower | Corydon76-home: not even with ChanIsAvail(Local/1000) |
| 23:42.45 | Corydon76-home | but what you can do is verify that mailbox 1000 exists |
| 23:42.57 | ManxPower | BSD_Tech: then go to the asterisk GUI channel. We can't help you do that |
| 23:43.20 | BSD_Tech | they are not working on dial plan |
| 23:43.25 | Corydon76-home | BSD_Tech: try VMAuthenticate. I think that'll do what you want |