| 00:06.03 | *** join/#asterisk russellb_ (n=russell@asterisk/developer-and-stable-maintainer/drumkilla) |
| 00:06.03 | *** mode/#asterisk [+o russellb_] by ChanServ |
| 00:07.09 | *** join/#asterisk DaveCanoe (n=Dave@strike.dclg.ca) |
| 00:17.00 | *** join/#asterisk implicit (n=implicit@nant.sumix.com) |
| 00:20.14 | drwelby | "Device does not match ACL" - how does one troubleshoot this? |
| 00:20.35 | drwelby | [Oct 7 00:21:09] NOTICE[338]: chan_sip.c:14801 handle_request_register: Registration from '<sip:602@192.168.16.253>' failed for '192.168.16.68' - Device does not match ACL |
| 00:20.40 | Qwell | set accept/deny |
| 00:26.25 | drwelby | Qwell: Do you mean the Allow or Deny in user.conf? |
| 00:28.50 | *** join/#asterisk rmayorga (n=rmayorga@unaffiliated/rmayorga) |
| 00:36.41 | Qwell | no, accept/deny |
| 00:36.46 | Qwell | not allow |
| 00:42.02 | drwelby | Weird. I just Allowed alaw and ulaw and denied everything else and the error stopped |
| 00:42.16 | drwelby | which is not the accept/deny you're talking about |
| 00:42.17 | Qwell | not alloe/deny |
| 00:42.22 | Qwell | accept/deny |
| 00:42.31 | drwelby | right |
| 00:42.51 | Qwell | deny=0.0.0.0 should do it |
| 00:43.16 | Qwell | erm, no |
| 00:43.18 | Qwell | accept=0.0.0.0 |
| 00:43.35 | Qwell | if you did deny=somecodec, it'll block the hostname "somecodec" |
| 00:44.16 | drwelby | sorry, not deny, but disallow |
| 00:44.54 | drwelby | Let me rephrase - allowing and disallowing certain codecs have stopped the ACL error message |
| 00:44.59 | drwelby | why, I don't know |
| 00:45.12 | *** join/#asterisk ReD-MaN (i=daemon@CPE0002b38bce8b-CM0018c0b357cc.cpe.net.cable.rogers.com) |
| 00:46.35 | *** join/#asterisk remmo (n=junk@203.32.47.250) |
| 00:53.18 | *** join/#asterisk drako (n=ljd@nelug/coreteam/luisjose) |
| 01:01.56 | drwelby | Any specific reason a Cisco 7940 would be unable to make outside calls, but a Cisco 7905 would? |
| 01:02.05 | *** join/#asterisk Buhntz (i=Boones@port-212-202-42-40.dynamic.qsc.de) |
| 01:02.14 | drwelby | The 7940 wants to dial outside numbers as a SIP extensions |
| 01:02.37 | drwelby | The 7905 seems to pass the number onto zap and dial correctly |
| 01:03.21 | drwelby | The 7940 does dial internal SIP extensions correctly though |
| 01:03.41 | Qwell | what channel driver? |
| 01:04.17 | drwelby | You're going to hate me for this, but this is on a box stock Asterisk Appliance |
| 01:04.30 | Qwell | how are you using a 7905 on an aa50? |
| 01:04.38 | Qwell | I thought we disabled chan_skinny O.o |
| 01:04.53 | drwelby | it works, that's all I can say |
| 01:04.58 | Qwell | so it must be there...heh |
| 01:05.10 | Qwell | you didn't configure it through the gui, did you? |
| 01:05.12 | Qwell | the 7905 |
| 01:05.22 | drwelby | I'm sshed into it if you want me to check anything... |
| 01:05.25 | Qwell | I'm fairly certain that there is no sip firmware for those, so it must be chan_skinny |
| 01:05.31 | Qwell | did you modify skinny.conf? |
| 01:05.57 | drwelby | 7905s, no - they were configged over TFTP |
| 01:06.10 | drwelby | skinny.conf? On the AA50? |
| 01:06.51 | drwelby | it's not in /etc/asterisk |
| 01:11.01 | drwelby | The 7905s were upgraded to SIP, I believe |
| 01:14.37 | *** join/#asterisk lmadsen (n=Leif@asterisk/documenteur-extraordinaire/blitzrage) |
| 01:14.37 | *** mode/#asterisk [+o lmadsen] by ChanServ |
| 01:17.54 | *** join/#asterisk lmadsen (n=Leif@asterisk/documenteur-extraordinaire/blitzrage) |
| 01:17.54 | *** mode/#asterisk [+o lmadsen] by ChanServ |
| 01:20.16 | *** join/#asterisk saftsack (n=saftsack@pD9E05456.dip.t-dialin.net) |
| 01:25.25 | *** join/#asterisk Mmurdock (n=vnjyjta@72.sub-72-122-53.myvzw.com) |
| 01:27.09 | *** join/#asterisk Defraz (n=t0tal@208-44-169-243.dia.static.qwest.net) |
| 01:27.53 | Defraz | I got libpri compiled and installed the zaptel drivers and I have configured the zaptel.conf and it finds the t1 on my digium card |
| 01:28.08 | Defraz | but now there is no pri command or fucntionality in asterisk |
| 01:28.11 | Defraz | did I miss something. |
| 01:28.25 | *** join/#asterisk moprilo (n=jjohn@190.10.0.64) |
| 01:28.42 | Defraz | First I compiled libpri , then zaptel and then asterisk and asterisk addones and installed the sounds. |
| 01:28.51 | moprilo | hi.. can i ask ChanIsAvail with Zap Groups?.. like this .? (exten => s,1,ChanIsAvail(Zap/g4)) |
| 01:33.03 | *** join/#asterisk asdx (n=diego@adsl-158-254.click.com.py) |
| 01:34.25 | Strom_M | moprilo: why? |
| 01:34.48 | Strom_M | Defraz: did you /install/ lipri? |
| 01:35.31 | Defraz | yes |
| 01:35.49 | Defraz | first then compiled and insalled zaptel |
| 01:35.51 | Defraz | then asterisk |
| 01:36.01 | Defraz | zttool shows the lines and everything. |
| 01:37.40 | Strom_M | pastebin your zapata.conf and your zaptel.conf |
| 01:37.42 | Defraz | but when I try and and do anything with the pri nothing is found in asterisk |
| 01:38.00 | Defraz | <PROTECTED> |
| 01:38.04 | Defraz | okay pasting now. |
| 01:38.10 | Strom_M | and this is 1.4? |
| 01:38.23 | Qwell | brownie points to anybody who gets me the # for the Comcast NOC |
| 01:38.34 | Strom_M | 555-2368 |
| 01:38.35 | Qwell | the actual NOC |
| 01:39.45 | Defraz | http://pastebin.com/m480c82ba |
| 01:40.31 | Defraz | Storm this is 1.2.24 |
| 01:40.37 | Strom_M | who's storm? |
| 01:40.48 | Defraz | ooops Strom sorry. |
| 01:40.53 | Defraz | fingers slipped. |
| 01:41.00 | Strom_M | tab complete is your friend |
| 01:41.35 | Strom_M | Defraz: hm. i'd try "make distclean" in the source directories, and then build again |
| 01:41.44 | Strom_M | this is libpri 1.2 as well, right? |
| 01:41.57 | Defraz | so do libpri first then zaptel then asterisk |
| 01:42.03 | Defraz | yes |
| 01:42.08 | Strom_M | try zaptel, libpri, asterisk |
| 01:42.13 | Defraz | 1.2.5 |
| 01:42.27 | Defraz | okay will do Strom_M |
| 01:42.50 | *** join/#asterisk aptura (n=jondoe@S010600a0c93f6f7e.vs.shawcable.net) |
| 01:43.23 | Defraz | If Asterisk can find libpri in the Lib path then that might be a problem right. |
| 01:43.39 | Defraz | I was havign trouble with it finding libspandsp |
| 01:43.50 | Defraz | and i had to add it in the path. and run Ldconfig |
| 01:45.37 | drwelby | Weird - my Cisco 7940's aren't using the right context? |
| 01:45.39 | drwelby | http://www.pastebin.ca/728508 |
| 01:46.45 | *** join/#asterisk jm|laptop (n=jm|home@zen.jamiem.com) |
| 01:47.14 | *** part/#asterisk jm|laptop (n=jm|home@zen.jamiem.com) |
| 01:51.27 | Defraz | yep that was it. |
| 01:51.51 | *** join/#asterisk ming_zym (n=ming_zym@124.254.54.169) |
| 01:55.21 | *** join/#asterisk yannj_fr (n=yannj_fr@tvn95-3-82-237-158-147.fbx.proxad.net) |
| 01:56.09 | drwelby | So when a context is included in another, is it just appended to the end or something? |
| 01:58.11 | drwelby | I just can't figure out how my 7940 seems to be skipping the context is supposed to be using. |
| 02:03.16 | *** part/#asterisk davevg-btwtech (n=davevg-b@nj-67-76-177-147.sta.embarqhsd.net) |
| 02:07.53 | *** part/#asterisk Defraz (n=t0tal@208-44-169-243.dia.static.qwest.net) |
| 02:08.18 | *** join/#asterisk mitcheloc (n=mitchel@adsl-68-120-68-89.dsl.irvnca.pacbell.net) |
| 02:08.36 | tzafrir_home | libpri does not depend on zaptel, so their order doesn't matter |
| 02:10.03 | *** join/#asterisk gremzoid (n=gremzoid@d58-111-173-16.rdl5.qld.optusnet.com.au) |
| 02:13.27 | *** join/#asterisk theHub (n=karl@ool-43577a99.dyn.optonline.net) |
| 02:22.06 | *** join/#asterisk MiLK_MaN (n=milkman@210.9.8.132) |
| 02:22.28 | MiLK_MaN | using asterisk as a xen domU, everything now working sweet except for voicemail, sip debug shows its playing the .gsm file, but i cant hear a thing at all |
| 02:28.08 | tzafrir_home | Does an echo test work? |
| 02:31.55 | *** part/#asterisk theHub (n=karl@ool-43577a99.dyn.optonline.net) |
| 02:32.44 | *** join/#asterisk techie (n=techie@adsl-76-214-3-9.dsl.lsan03.sbcglobal.net) |
| 02:33.03 | *** join/#asterisk theHub (n=karl@ool-43577a99.dyn.optonline.net) |
| 02:39.29 | *** join/#asterisk mrdigital (n=MrDigita@pool-72-94-128-5.phlapa.east.verizon.net) |
| 02:40.25 | *** join/#asterisk orbi (n=orbi@68-119-116-31.dhcp.jcsn.tn.charter.com) |
| 02:41.24 | MiLK_MaN | tzafrir_home: hmm, ill google how to do that first i think |
| 02:41.40 | Qwell | orbi: need to register first |
| 02:42.04 | Qwell | I'd throw a packet back at you if I had the source in front of me |
| 02:42.16 | tzafrir_home | MiLK_MaN, what *does* work? |
| 02:42.20 | orbi | ;) |
| 02:42.36 | MiLK_MaN | tzafrir_home: sip calls |
| 02:42.46 | MiLK_MaN | got a sip trunk set up and registered |
| 02:42.46 | tzafrir_home | sip to sip? |
| 02:42.51 | MiLK_MaN | sip to sip, yeah |
| 02:46.36 | *** part/#asterisk orbi (n=orbi@68-119-116-31.dhcp.jcsn.tn.charter.com) |
| 02:47.47 | *** join/#asterisk meechmunchie (n=Administ@p57B3C027.dip0.t-ipconnect.de) |
| 02:47.57 | meechmunchie | hello and good morning ^^ |
| 02:52.27 | *** join/#asterisk JackEStorm (n=no@ip68-225-77-136.no.no.cox.net) |
| 03:01.28 | *** join/#asterisk tellinpho (n=mrstorr@24.244.155.106) |
| 03:10.21 | meechmunchie | I have a junghanns-quadro here, do I really need that bristuff or can I use usual asterisk ? |
| 03:11.01 | meechmunchie | I meant that bristuff on junghanns website ^^ |
| 03:15.31 | *** join/#asterisk florz (n=florz@2001:1a50:503c:0:0:0:0:1) |
| 03:33.57 | *** part/#asterisk meechmunchie (n=Administ@p57B3C027.dip0.t-ipconnect.de) |
| 03:40.08 | *** join/#asterisk Teln1100A (i=hello123@bas2-toronto12-1128663406.dsl.bell.ca) |
| 03:43.22 | *** join/#asterisk ming_zym (n=ming_zym@f0-0-tep-rtr1.corp.cnb.yahoo.com) |
| 03:45.37 | *** join/#asterisk DrAk0 (n=ljd@nelug/coreteam/luisjose) |
| 03:48.57 | *** join/#asterisk stkn_ (n=stkn@gentoo/developer/pdpc.active.stkn) |
| 03:53.18 | *** join/#asterisk meechmunchie (n=Administ@p57B3C027.dip0.t-ipconnect.de) |
| 03:53.22 | *** part/#asterisk meechmunchie (n=Administ@p57B3C027.dip0.t-ipconnect.de) |
| 04:01.16 | *** join/#asterisk asdx (n=diego@adsl-158-254.click.com.py) |
| 04:06.57 | *** join/#asterisk Yourname`` (i=Miranda@unaffiliated/yourname/x-837320) |
| 04:07.07 | *** part/#asterisk nuonguy (n=john@c-24-6-175-26.hsd1.ca.comcast.net) |
| 04:07.21 | Yourname`` | When I type "asterisk -r", which asterisk gets invoked? /etc/init.d/asterisk? Or which one? |
| 04:08.03 | Yourname`` | Or /usr/sbin/asterisk |
| 04:09.42 | gremzoid | i doubt /etc/init.d/asterisk is in your path |
| 04:10.01 | [TK]D-Fender | . /usr/sbin/asterisk |
| 04:16.21 | Yourname`` | Gotcha, thanksie! |
| 04:20.38 | asdx | do "type asterisk" |
| 04:22.34 | *** join/#asterisk bkruse_home (n=bkruse@69.73.127.92) |
| 04:29.27 | *** join/#asterisk blitzrage (n=Leif@asterisk/documenteur-extraordinaire/blitzrage) |
| 04:29.27 | *** mode/#asterisk [+o blitzrage] by ChanServ |
| 04:41.45 | [TK]D-Fender | blitzrage, you don't want to be awake! |
| 04:41.53 | blitzrage | sure I do! :) |
| 04:42.44 | [TK]D-Fender | blitzrage, but you still just want........ |
| 04:43.03 | blitzrage | to be awake! |
| 04:43.10 | [TK]D-Fender | blitzrage, z0mg! lies :p |
| 04:47.01 | bjweeks | my asterisk box is trying to call my DNS server :/ |
| 04:50.51 | blitzrage | weee! |
| 04:53.38 | blitzrage | my voicemail in dialplan logic is coming along nicely |
| 04:53.43 | blitzrage | http://www.pastebin.ca/728591 |
| 04:53.52 | blitzrage | lots of good tricks in there |
| 04:59.36 | *** join/#asterisk shtoom (n=shtoom@59.93.116.244) |
| 05:10.46 | *** join/#asterisk nighty^ (n=nighty@sushi.rural-networks.com) |
| 05:20.27 | *** join/#asterisk bmg505 (n=leon@196.209.176.188) |
| 05:22.04 | *** join/#asterisk Gamercjm (n=chris@pool-71-254-179-93.lsanca.fios.verizon.net) |
| 05:24.44 | Gamercjm | Using a .call file, if a call is not answered, how can I get the results if it fails? I would like to add it automaticly in mysql.. could I add a timeout and make it perform a command? |
| 05:27.25 | MiLK_MaN | using asterisk as a xen domU, everything now working sweet except for voicemail, sip debug shows its playing the .gsm file, but i cant hear a thing at all |
| 05:33.27 | *** join/#asterisk FireMac (n=firemac@CPE000d88ae88b9-CM0011ae8bb0ee.cpe.net.cable.rogers.com) |
| 05:35.14 | *** join/#asterisk zillao (n=zillao@201.240.31.142) |
| 05:35.46 | *** part/#asterisk zillao (n=zillao@201.240.31.142) |
| 05:38.06 | *** join/#asterisk techie (n=techie@adsl-76-214-3-9.dsl.lsan03.sbcglobal.net) |
| 05:38.09 | *** part/#asterisk techie (n=techie@adsl-76-214-3-9.dsl.lsan03.sbcglobal.net) |
| 05:48.13 | *** join/#asterisk blitzrage (n=Leif@asterisk/documenteur-extraordinaire/blitzrage) |
| 05:48.13 | *** mode/#asterisk [+o blitzrage] by ChanServ |
| 05:49.03 | *** join/#asterisk adorah (n=Michael@87.69.57.246.cable.012.net.il) |
| 05:58.33 | *** join/#asterisk PepOSX (n=pepOSX@190.72.151.242) |
| 05:58.42 | MiLK_MaN | i can see this: |
| 05:58.42 | MiLK_MaN | -- Executing [111@numberplan-custom-2:2] Playback("SIP/6000-08260560", "welcome") in new stack |
| 05:58.46 | MiLK_MaN | but i hear nothing |
| 05:59.01 | MiLK_MaN | calls work fine, just no playback of files |
| 06:04.09 | *** join/#asterisk Strom_C (n=strom@208.127.172.112) |
| 06:07.51 | *** join/#asterisk L|NUX (n=linux@unaffiliated/lnux/x-10290) |
| 06:15.57 | tzafrir_home | missing timing source? bad timing source? |
| 06:16.18 | MiLK_MaN | im loading the ztdummy module |
| 06:17.20 | MiLK_MaN | ok, if i put myself on hold |
| 06:17.22 | MiLK_MaN | i get music okj |
| 06:17.31 | tzafrir_home | does it really work? What do you see when you run zttest ? |
| 06:17.49 | MiLK_MaN | -- Started music on hold, class 'default', on SIP/xxxxxxxxxx-08262a10 |
| 06:18.00 | tzafrir_home | Do you use any patched ztdummy? |
| 06:18.08 | MiLK_MaN | nah i dont, i just read up about that |
| 06:18.19 | MiLK_MaN | you refer to the ztxen right? |
| 06:18.41 | tzafrir_home | right. Which is a modified ztdummy . What kernel do you use? |
| 06:18.52 | MiLK_MaN | im using whatever came with asterisknow |
| 06:19.06 | MiLK_MaN | Linux asterisknow 2.6.16.33-0.1.smp.pae.gcc3.4.x86.i686.xen.domU #1 SMP Thu Jun 14 01:41:40 EDT 2007 i686 i686 i386 GNU/Linux |
| 06:24.01 | sheppard | Can anyone reccomend a voip provider that'll just let me generate my calls from asterisk and will give me a canadian number? |
| 06:33.17 | orakle | les.net |
| 06:33.25 | orakle | haven't tried them, but they have good rates |
| 06:39.21 | sheppard | wow not cheap |
| 06:39.55 | *** join/#asterisk CBU[^_^]M`` (n=love@210.213.142.229) |
| 06:48.21 | orakle | 1.5c/min? |
| 06:48.23 | orakle | that's cheap. |
| 06:48.42 | orakle | $8.88/month for a number with unlimited incoming calls |
| 06:48.50 | orakle | how much cheaper do you want? |
| 06:48.59 | sheppard | all my stuff is outgoing =\ |
| 06:49.19 | gremzoid | no such thing as a free lunch |
| 06:49.24 | sheppard | no |
| 06:49.37 | sheppard | I think I'll just grab a fxo card and use my existing voip service |
| 06:54.01 | orakle | so you're going to dial out of asterisk with the fxo card |
| 06:54.11 | orakle | into an ATA connected to your existing voip? |
| 06:54.27 | orakle | can't you just connect to your existing voip from asterisk directly? or is it vonage or something |
| 06:56.05 | *** join/#asterisk chesty (n=chesty@unconcerned.org) |
| 06:56.45 | *** join/#asterisk Kernel_Core (n=I@83.217.236.116) |
| 06:58.39 | sheppard | http://alnk.org/littlenose |
| 06:58.58 | sheppard | orakle: shaw, but yeah, same shit as vonage |
| 06:59.21 | sheppard | i have some form of voip device that's plugged into my cable line, however they have the ethernet disabled on it |
| 07:03.51 | orakle | right |
| 07:03.59 | orakle | it just provides a phone port and that's it |
| 07:04.01 | orakle | heh |
| 07:04.06 | orakle | so why not do it that way |
| 07:04.09 | sheppard | 2 phone ports actually! |
| 07:04.11 | orakle | an fxo card is like what, $30? |
| 07:04.15 | sheppard | well |
| 07:04.18 | sheppard | I saw some $30 FXO cards |
| 07:04.27 | sheppard | but I'm not sure if they're any good or not |
| 07:04.31 | orakle | hm y eah |
| 07:04.38 | orakle | i was looking on ebay |
| 07:04.39 | sheppard | I hear the TDM400P (I think) was quite good |
| 07:04.42 | orakle | some are like 30 and some are like 300 |
| 07:04.43 | orakle | heh |
| 07:04.49 | sheppard | but that'll support 4FXO or FXS ports |
| 07:04.52 | sheppard | which I really don't need |
| 07:04.55 | orakle | right |
| 07:04.58 | orakle | yeah i'd only need one as well |
| 07:05.08 | orakle | can you use those cheap voip ATAs? |
| 07:05.16 | orakle | or is that only for analog to voip and not the other way around |
| 07:05.24 | sheppard | nfi |
| 07:05.26 | *** join/#asterisk munmun (n=mun_mun@203.80.176.168) |
| 07:05.49 | orakle | i almost wanna get one to mess around with |
| 07:05.52 | orakle | there are cheap unlocked ones on ebay |
| 07:06.41 | Kernel_Core | anybody familiar with speex here ? |
| 07:09.08 | *** join/#asterisk Strom_M (n=strom@208.127.172.112) |
| 07:28.22 | *** join/#asterisk ming_zym (n=ming_zym@f0-0-tep-rtr1.corp.cnb.yahoo.com) |
| 07:31.26 | *** join/#asterisk munmun (n=mun_mun@202.122.127.252) |
| 07:42.07 | *** join/#asterisk idespinner (n=idespinn@cpe-75-82-69-211.socal.res.rr.com) |
| 07:42.11 | idespinner | hello |
| 07:45.07 | *** join/#asterisk xtr (n=94752345@216.19.191.191.novuscom.net) |
| 07:47.14 | *** part/#asterisk MiLK_MaN (n=milkman@210.9.8.132) |
| 07:51.23 | *** join/#asterisk af_ (n=getsmart@81-174-9-236.dynamic.ngi.it) |
| 08:07.36 | *** join/#asterisk jedaustin (n=chatzill@wsip-66-210-241-251.ph.ph.cox.net) |
| 08:08.40 | jedaustin | Arg! I think I'm going to have a melt down :) Installing an astribank.. ztcfg sees it, lszaptel sees it, asterisk doesn't even have zap. Can someone throw me a clue :)? |
| 08:16.41 | *** join/#asterisk L|NUX (n=linux@unaffiliated/lnux/x-10290) |
| 08:33.45 | *** join/#asterisk tzafrir (n=tzafrir@62.90.10.53) |
| 08:42.55 | *** join/#asterisk blq (n=Bl@dslb-088-067-041-232.pools.arcor-ip.net) |
| 09:02.06 | *** join/#asterisk Dovid (i=HydraIRC@bzq-88-152-110-223.red.bezeqint.net) |
| 09:02.32 | Dovid | when creating a conference room I have meetme(100) and i get invalid confenrece number. what am i missing ? |
| 09:02.58 | idespinner | is the context correct? |
| 09:03.20 | Dovid | nm. i never did meetme.conf |
| 09:04.46 | Dovid | i added it to meetme.conf and it still wont work |
| 09:06.07 | idespinner | i would still double check the contect |
| 09:06.12 | idespinner | context |
| 09:06.53 | *** join/#asterisk fordfrog (n=fordfrog@gentoo/developer/fordfrog) |
| 09:08.24 | Dovid | what do u mean by context / |
| 09:08.27 | Dovid | ?* |
| 09:09.04 | idespinner | in extensions.conf, the dialplans can each exist in a seperate context |
| 09:09.37 | Dovid | that i know |
| 09:09.47 | Dovid | i get an error so it is going to meetme |
| 09:09.58 | Dovid | itsbeen too damnlong since I have created a conference |
| 09:11.27 | *** join/#asterisk duki (n=duki@host-85-27-58-159.brutele.be) |
| 09:11.55 | Dovid | nm |
| 09:11.59 | Dovid | ztdummy was not loaded |
| 09:12.19 | *** join/#asterisk gremzoid (n=gremzoid@d58-111-173-16.rdl5.qld.optusnet.com.au) |
| 09:22.59 | *** join/#asterisk Bhaal (i=bhaal@freenode/staff/bhaal) |
| 09:33.55 | *** join/#asterisk mvanbaak (n=mafkees@vanbaak.xs4all.nl) |
| 09:34.02 | *** join/#asterisk idespinnr (n=idespinn@cpe-75-82-69-211.socal.res.rr.com) |
| 09:43.03 | *** join/#asterisk ToTo (n=ToTo@host75-142-dynamic.8-87-r.retail.telecomitalia.it) |
| 09:44.39 | *** join/#asterisk ToTo (n=ToTo@host75-142-dynamic.8-87-r.retail.telecomitalia.it) |
| 10:06.59 | *** join/#asterisk grEvenX (n=even@pc107-130.ktv.no) |
| 10:20.30 | *** join/#asterisk ian_goscouk (n=ias@stringer.plus.com) |
| 10:21.35 | ian_goscouk | can anyone offer any help with Asterisk and CDR Logging to Oracle ? isql ok, but asterisk log reports unable to connect to data source |
| 10:22.26 | Dovid | never touched oracle :( i am in luv wit mysql |
| 10:23.15 | ian_goscouk | ok with mysql too - but need to move to oracle for other apps etc |
| 10:23.49 | Dovid | sorry |
| 10:23.53 | Dovid | try the users lis |
| 10:23.55 | Dovid | list* |
| 10:24.01 | Dovid | http://lists.digiun.com |
| 10:24.53 | ian_goscouk | been all through the lists/forums/google/oracle etc - and as usual you see the question been asked, but never give the answer |
| 10:25.57 | Dovid | what erorr r u getting ? |
| 10:26.28 | tzafrir | http://lists.digium.com actually |
| 10:26.37 | Dovid | thanks tzafrir |
| 10:26.41 | Dovid | a bit tired and sick here ;) |
| 10:27.04 | ian_goscouk | asterisk log reports cdr_odbc: unable to connect to datasource xxx. turned verbose logging on, the it shows the correct dsn/user/password, but won't connect |
| 10:27.05 | tzafrir | For a moment I thought you were just south american :-) |
| 10:27.55 | tzafrir | and you can connect with isql ? |
| 10:28.06 | ian_goscouk | yes - perfect - and retrieve data |
| 10:28.24 | tzafrir | some incorrect socket / port / whatever settings there? |
| 10:28.56 | ian_goscouk | prob - if anyone has sample oracle settings for cdr.conf cdr_odbc.conf etc - would be very interested |
| 10:29.09 | tzafrir | Can you eliminate a password issue? Can you see a connection attempt in the logs of Oracle? |
| 10:29.20 | tzafrir | (now idea what you have on that side) |
| 10:29.51 | tzafrir | or use wireshark to try to get an idea at what's going on |
| 10:30.01 | ian_goscouk | yes - everything is fine - |
| 10:30.29 | ian_goscouk | not tried to view oracle session monitoring - not easy - for a commercial product !! |
| 10:32.05 | ian_goscouk | i did read somewhere that patching in cdr_odbc may be required. |
| 10:33.52 | tzafrir | well, Oracle is the main target of cdr_odbc |
| 10:34.31 | ian_goscouk | will keep trying - it's just another of the tasks I only get time for in my 'spare' time at the weekend |
| 10:36.13 | ian_goscouk | uk here - so 11:30 sun morning |
| 10:39.43 | tzafrir | It's a working day here :-) |
| 10:51.50 | *** join/#asterisk ming_zym (n=ming_zym@124.254.54.169) |
| 10:54.39 | *** part/#asterisk _Soul_ (n=sergio@suporte.3gnt.net) |
| 10:57.37 | jedaustin | Anyone use astribank; if so... does it send did info to asterisk? |
| 10:58.15 | *** join/#asterisk zotz (n=zotz@24.244.163.157) |
| 11:01.00 | tzafrir | jedaustin, astribank BRI or FXO? |
| 11:01.10 | jedaustin | fxo |
| 11:01.29 | jedaustin | astribank 8fxo |
| 11:01.31 | tzafrir | well, just like standard FXO channel - no |
| 11:01.53 | tzafrir | At least not with standard signalling |
| 11:02.15 | tzafrir | You normally get caller ID from the telco |
| 11:02.26 | jedaustin | Not a big deal I guess.. I was able to route inbound calls based on the zap channel number |
| 11:02.37 | tzafrir | It is also trivial to extract the zaptel channel number |
| 11:02.56 | tzafrir | (see our sample dialplan for the input port) |
| 11:02.58 | jedaustin | It's a multi tennant office.. otherwise it wouldn't matter |
| 11:03.26 | *** join/#asterisk d00gster (n=doughant@bas1-toronto12-1167878841.dsl.bell.ca) |
| 11:04.01 | tzafrir | http://rapid.tzafrir.org.il/docs/README.Astribank.html |
| 11:42.42 | tzafrir | jedaustin, so is that OK? |
| 11:44.02 | jedaustin | tzafrir: wish I had that a few hours ago :) Last thing left is to figure out how to limit the 1XX and 2XX users to specific trunks. |
| 11:44.42 | tzafrir | send them to different contexts . |
| 11:44.50 | tzafrir | That's what include=> is for... |
| 11:46.25 | jedaustin | They still want to be able to transfer between eachother, would being in different contexts keep that from happening? |
| 11:48.13 | *** join/#asterisk famicon (n=redz@c51447ddc.cable.wanadoo.nl) |
| 12:00.15 | jedaustin | back tomorrow.. it's 5am here; I've been here TOO long :) Thanks everyone for your help |
| 12:01.25 | *** join/#asterisk Poincare (n=jefffnod@amp89.ampersant.be) |
| 12:04.39 | *** join/#asterisk danalien (n=danalien@unaffiliated/danalien) |
| 12:18.58 | *** join/#asterisk knarfly (n=vj39@c-75-74-155-198.hsd1.fl.comcast.net) |
| 12:21.29 | *** join/#asterisk Greek-Boy (n=Greek-Bo@196.46.105.176) |
| 12:37.12 | *** join/#asterisk ai-a (n=jake2@cpc5-oxfd1-0-0-cust523.oxfd.cable.ntl.com) |
| 12:55.41 | idespinnr | hgkh |
| 12:55.46 | idespinnr | njj' |
| 12:56.03 | Greek-Boy | ? |
| 13:25.39 | *** join/#asterisk santiago (n=santiago@debian/developer/santiago) |
| 13:32.48 | *** join/#asterisk munmun (n=mun_mun@203.80.176.168) |
| 13:35.55 | *** join/#asterisk b_d (n=brian@209.240.42.143) |
| 13:38.19 | *** join/#asterisk _ShrikE (n=ShrikE@adsl-074-185-215-060.sip.msy.bellsouth.net) |
| 13:40.10 | *** join/#asterisk jonmoore (n=jonmoore@c-68-53-165-155.hsd1.ky.comcast.net) |
| 13:45.48 | *** join/#asterisk [TK]D-Fender (n=Joe@64.235.216.2) |
| 13:48.58 | *** part/#asterisk jonmoore (n=jonmoore@c-68-53-165-155.hsd1.ky.comcast.net) |
| 14:00.10 | *** join/#asterisk L|NUX (n=linux@unaffiliated/lnux/x-10290) |
| 14:14.29 | *** join/#asterisk snook3r (n=snook3r@bzq-219-46-202.isdn.bezeqint.net) |
| 14:16.59 | *** join/#asterisk Chris-NB (n=chris@home.fuerstaller.com) |
| 14:21.48 | *** join/#asterisk shtoom (n=shtoom@59.93.117.139) |
| 14:27.32 | *** join/#asterisk drako (n=ljd@nelug/coreteam/luisjose) |
| 14:27.55 | *** join/#asterisk zotz (n=zotz@24.244.163.157) |
| 14:44.59 | *** join/#asterisk anonymouz666 (n=anonymou@200.218.193.6) |
| 14:55.56 | devel | greetings all. anybody here who uses realtime in the dialplan? |
| 14:56.59 | gremzoid | just finished polishing something off |
| 14:57.14 | gremzoid | good timing... :) |
| 14:57.53 | devel | gremzoid, realtime? |
| 14:58.08 | gremzoid | yea... with evil ole mysql too :P |
| 14:59.16 | devel | i'm getting a "no such switch 'Realtime'" error when my extensions.conf points to realtime. some insight? |
| 14:59.32 | devel | works fine in the sip peers. |
| 14:59.54 | devel | using asterisk 1.4.12 |
| 15:00.00 | gremzoid | this using something like 'switch => Realtime/context@bleh' ? |
| 15:00.06 | devel | right. |
| 15:00.19 | gremzoid | i couldn't get it to work like that |
| 15:00.25 | devel | indeed! |
| 15:00.28 | gremzoid | http://shells.homeunix.net/~chps/unicommAsterisk/conf/extensions.conf |
| 15:00.39 | gremzoid | see my default context... i did it that way |
| 15:01.21 | gremzoid | uses the same table as i read in all the crap documentation... |
| 15:01.33 | gremzoid | i just couldn't get that switch crap to do anything |
| 15:02.11 | gremzoid | devel, it's _very_ incomplete... it only handles the Goto/Dial/Macro applications atm |
| 15:02.12 | devel | i'll absorb that. unfortunately that was my next route (using some other backend/agi method) but i was just _sure_ that "switch" had to work as that's all that's "documented" |
| 15:02.14 | *** join/#asterisk saftsack (n=oliver@p54A7DE35.dip.t-dialin.net) |
| 15:02.31 | gremzoid | i even read the source code... |
| 15:02.35 | gremzoid | :P |
| 15:03.04 | gremzoid | i couldn't make any sense... if you get it to work, drop back here and tell me how :P |
| 15:03.20 | [TK]D-Fender | that is a horrible hack and complete what you shouldn't be looking for... |
| 15:03.33 | devel | ha ha. |
| 15:03.47 | devel | any insight into 'switch' then, [TK]D-Fender? |
| 15:03.58 | [TK]D-Fender | gremzoid, you may as well have used your own table and func_odbc for all you've done... |
| 15:04.18 | [TK]D-Fender | devel, show what you're DOING and we'll see what needs to be adjusted |
| 15:04.23 | [TK]D-Fender | ~pb |
| 15:04.23 | jbot | A Pastebin is a place to paste your stuff without flooding the channel. Here are links to a few : http://www.pastebin.com , http://pastebin.ca , http://channels.debian.net/paste , http://paste.lisp.org , http://www.rafb.net/paste |
| 15:04.36 | devel | my brain tells me that 'core show switches' should at least show 'Realtime' |
| 15:05.51 | devel | [TK]D-Fender, that's all i'm doing. in context [tandem] a single entry 'switch => Realtime/tandem@extensions' then get the error 'pbx_find_extension: No such switch 'Realtime'' |
| 15:06.17 | devel | i'd feel bad about wasting pastebin space for so little, even. |
| 15:06.55 | [TK]D-Fender | devel, pastebin your configs that show you're using realtime for this in the first place, and your actual dialplan |
| 15:07.22 | [TK]D-Fender | devel, and reload your config with high debug leve to verify if there are error messages |
| 15:07.36 | gremzoid | [TK]D-Fender, it could be easily ported over to odbc/pgsql/bleh... |
| 15:08.04 | [TK]D-Fender | gremzoid, that isn't realtime... its a BD hack PRETENDING to be realtime |
| 15:08.22 | gremzoid | mysql is all i have/know/need (traffic is low, just using * for its cool AGI stuffs) |
| 15:08.33 | gremzoid | bd? |
| 15:08.37 | [TK]D-Fender | DB* |
| 15:09.07 | [TK]D-Fender | gremzoid, You are using it as a bottom-of-the-line way to map an exten to a single macro format or dial parameter. |
| 15:09.21 | [TK]D-Fender | gremzoid, You could have done this in ANY kind of DB without realtime |
| 15:09.29 | gremzoid | [TK]D-Fender, show me a nicer way and i'll use it... |
| 15:09.35 | FireMac | hi, what is the difference of freepbx and asterisk-gui? |
| 15:09.51 | [TK]D-Fender | gremzoid, in fact had you done it using your own template you wouldn't have needed all those GotoIf's for syntax checking :) |
| 15:10.36 | devel | http://pastebin.com/d103fc034 |
| 15:10.57 | [TK]D-Fender | FireMac, Freepbx does EVERYTHING, *-GUI does most stuff. * GUI uses users.conf and other garbage, runs on its own HTTP server and uses Java. FreePBX uses PHP + Apache(can work with others I think) |
| 15:11.28 | [TK]D-Fender | devel, dump your table please. |
| 15:11.48 | devel | one moment. |
| 15:11.51 | [TK]D-Fender | gremzoid, realtime IS the proper way |
| 15:12.07 | [TK]D-Fender | gremzoid, holds all your extens as they should be. |
| 15:12.39 | gremzoid | [TK]D-Fender, still don't quite get yer... you're saying i should have generated the flat conf files from the DB... instead of looking it up in sql? |
| 15:13.24 | tzafrir | asterisk-gui uses javascript, not java |
| 15:13.27 | [TK]D-Fender | gremzoid, No, the DB is supposed to hold the EQUIVALENT of pure dialplan code. |
| 15:13.44 | [TK]D-Fender | tzafrir : I cut that short, yes :) |
| 15:13.46 | devel | http://pastebin.com/d31d3fdc6 [TK]D-Fender |
| 15:13.50 | *** join/#asterisk fakhir (n=fakhir@unaffiliated/fakhir) |
| 15:14.01 | gremzoid | but i don't want the final user to edit the entire dialplan... just extens/crap |
| 15:15.03 | [TK]D-Fender | gremzoid, Thats up to you to creat a DB front-end so the can only mod stuff you want them to. |
| 15:15.28 | [TK]D-Fender | gremzoid, like a web-panel or something... |
| 15:16.48 | [TK]D-Fender | gremzoid, if all you want is something super minimal that you'll parse out yourself like you've shown, then use a DB of your own design. It'll be simpler and easier to maintain and use. |
| 15:17.04 | [TK]D-Fender | devel, pastebin a failed dial attempt at verbose 10 & debug 10 |
| 15:17.21 | gremzoid | [TK]D-Fender, i started off like devel here... but the switch thing wouldn't work... |
| 15:17.24 | devel | ah, [TK]D-Fender you're exactly right |
| 15:17.35 | [TK]D-Fender | devel, what was it? |
| 15:17.36 | gremzoid | [TK]D-Fender, not exactly my fault the documention is shit |
| 15:17.45 | gremzoid | ;) |
| 15:17.50 | [TK]D-Fender | gremzoid, only for you in what you found. |
| 15:17.52 | [TK]D-Fender | ~book |
| 15:17.53 | jbot | Asterisk: The Future of Telephony 2nd Edition (ISBN 0-596-51048-9) --- Order yours at http://www.oreilly.com/catalog/9780596510480/ --- Downloadable PDF http://downloads.oreilly.com/books/9780596510480.pdf |
| 15:17.53 | devel | wait... |
| 15:17.54 | [TK]D-Fender | ^^^^^^^^^^^ |
| 15:18.04 | *** join/#asterisk _thistle (n=thistle@cpe-71-74-139-80.neo.res.rr.com) |
| 15:18.26 | gremzoid | got it, read it, nothing about switch => Realtime in the entire thing... |
| 15:18.57 | [TK]D-Fender | gremzoid, this is the NEW book, release about a WEEK ago..... sure you have THIS one? |
| 15:19.06 | gremzoid | downloaded it yesterday |
| 15:19.18 | Corydon76-dig | The experienced would recommend that you NOT use realtime extensions |
| 15:19.36 | [TK]D-Fender | Corydon76-dig, For totally different reasons of course... |
| 15:19.47 | [TK]D-Fender | Corydon76-dig, but it DOES work, and isn't rocket science... |
| 15:19.47 | gremzoid | this experiance really deters me from spending $$$ |
| 15:19.55 | Corydon76-dig | There are better ways to do dynamic dialplans, such as func_odbc |
| 15:20.13 | [TK]D-Fender | Corydon76-dig, Yes, depending on complexity and your goals with the DB |
| 15:20.15 | devel | hmm. i see thequery: SELECT * FROM sip WHERE name = '9705212799' (which if executed in mysql directly yields a row) |
| 15:20.22 | gremzoid | Corydon76-dig, chicken in the egg... how does the switch => Realtime crap work? |
| 15:20.33 | gremzoid | theres no documention and what there is is utter shite |
| 15:20.46 | *** join/#asterisk nighty^ (n=nighty@sushi.rural-networks.com) |
| 15:20.47 | Corydon76-dig | gremzoid: I recommend that you do not use it |
| 15:20.48 | *** join/#asterisk santiago (n=santiago@debian/developer/santiago) |
| 15:20.48 | devel | but then the "no such switch" error, but debug error "Call from '9705212799' to extension '9705212798' rejected because extension not found." |
| 15:20.50 | [TK]D-Fender | ok, IO've got to go for now, back in a bit. |
| 15:21.23 | *** join/#asterisk vgster (n=vgster@cpc2-ledn1-0-0-cust826.leed.cable.ntl.com) |
| 15:21.48 | Corydon76-dig | gremzoid: instead, write a small static dialplan, doing your own queries to the database with func_odbc |
| 15:22.27 | gremzoid | Corydon76-dig, i tend to think the switch thing is broken... |
| 15:22.36 | gremzoid | dosn't work for devel here either... |
| 15:22.39 | Corydon76-dig | gremzoid: switch is not broken |
| 15:22.50 | gremzoid | else i would have done it as the textbook |
| 15:23.03 | gremzoid | however the textbook example dosn't work |
| 15:23.28 | devel | i agree. |
| 15:23.52 | devel | i could understand if i couldn't route because i'm an idiot, but the 'switch' statement seems to be what's breaking |
| 15:24.00 | gremzoid | it's fine to tell me how it should be done... but i tried that and this is the only way i got it to work... |
| 15:25.03 | Corydon76-dig | It's something like "switch => Realtime/context@tablename/opts |
| 15:25.07 | *** join/#asterisk AJaymn (n=Me@71-82-218-158.dhcp.mdsn.wi.charter.com) |
| 15:25.28 | devel | http://pastebin.com/d31d3fdc6 |
| 15:25.36 | AJaymn | Anyone know of a Heartbeat monitor for Asterisk? If something fails SIP trunks maybe.. It can send out an Email |
| 15:25.52 | devel | that's what i had Corydon76-dig and still no joy. |
| 15:26.08 | gremzoid | same |
| 15:26.28 | devel | and don't get me wrong, i'm fine with doing it the route gremzoid did, or along what you're suggesting, but still it should work as "documented" i'd think. |
| 15:26.49 | Corydon76-dig | There's something else wrong, then |
| 15:26.59 | Corydon76-dig | Probably a socket mismatch |
| 15:27.18 | devel | however, the sip entries work. |
| 15:27.19 | Corydon76-dig | i.e. /var/lib/mysql/mysql.sock vs /tmp/mysql.sock |
| 15:27.32 | devel | and, let me verify that again before i insist on it :) |
| 15:27.56 | Corydon76-dig | It does work, however badly |
| 15:29.01 | devel | yes. i have two extensions in realtime sip, and i can call one another if the extensions.conf entry is static (i.e. pointed to SIP/${EXTEN}) |
| 15:29.04 | gremzoid | devel, try: realtime load family fieldname fieldval |
| 15:29.23 | gremzoid | that returns the datafromt the table? |
| 15:29.30 | devel | so i'm confident that it's talking to the db. |
| 15:29.37 | gremzoid | + a whitespace in there |
| 15:29.40 | devel | the only 'realtime' options i have are 'realtime mysql status' |
| 15:32.02 | Corydon76-dig | devel: you'd need to have app_realtime loaded |
| 15:32.58 | devel | huh. well i certainly don't have that... one moment. |
| 15:33.17 | FireMac | hi is the zaptel trunk ok? |
| 15:33.24 | devel | and probably func_realtime and pbx_realtime? |
| 15:33.29 | tzafrir | FireMac, no. Use branches/1.4 |
| 15:33.35 | FireMac | kk |
| 15:35.11 | Corydon76-dig | Yes, you certainly do need pbx_realtime |
| 15:35.13 | devel | hey, now 'core show switches' shows realtime, as i would expect. why in the world wasn't that in any documentation anywhere? they only speak of the res_config_mysql |
| 15:35.27 | Corydon76-dig | considering pbx_realtime contains the extension logic |
| 15:35.51 | devel | see, i don't autoload modules, so if nothing says what to load, how can i know? |
| 15:36.01 | Corydon76-dig | devel: because people don't generally turn off autoloading |
| 15:36.06 | FireMac | where can i get mpg123? |
| 15:36.24 | Corydon76-dig | FireMac: we don't recommend that you use that anymore |
| 15:36.35 | Corydon76-dig | FireMac: use native moh, now |
| 15:36.40 | devel | i right a lean mean machine here, Corydon76-dig. |
| 15:36.56 | devel | and i had to come in to work on a day off to find somebody who could point me in the right direction. |
| 15:37.02 | FireMac | so all we need to install asterisk is asterisk libpri and zaptel, is that all? |
| 15:37.09 | Corydon76-dig | devel: and if you do turn it off, we assume that you know what you're doing |
| 15:37.11 | devel | well worth the company's money. |
| 15:37.25 | tzafrir | FireMac, though preferbly zaptel and libpri before asterisk |
| 15:37.31 | devel | well Corydon76-dig, some days that may be a stretch |
| 15:37.32 | Corydon76-dig | FireMac: if you want to use mp3's for moh, asterisk-addons contains format_mp3 |
| 15:37.56 | FireMac | kk |
| 15:38.03 | tzafrir | But then again, converting mp3s to wavs is usually better |
| 15:38.31 | Corydon76-dig | Yeah, I'd go with wavs, since it cuts back on the amount of transcoding that needs to be done |
| 15:39.02 | devel | so now it works as i'd expect it to, Corydon76-dig (and [TK]D-Fender and gremzoid). thanks for the pointers. |
| 15:39.32 | Corydon76-dig | Helps when you load the module that does the work. ;-) |
| 15:39.33 | gremzoid | wheres this autoloading option? |
| 15:39.42 | Corydon76-dig | in /etc/asterisk/modules.conf |
| 15:40.05 | devel | i may update the wiki... |
| 15:40.14 | Corydon76-dig | It's considered less necessary, now that you can select the modules you want to compile and install with 'make menuselect' |
| 15:40.28 | FireMac | sorry guys, is there svn for the addons? |
| 15:40.36 | Corydon76-dig | Yes |
| 15:40.58 | Corydon76-dig | Same basic path, except substitute asterisk-addons for asterisk |
| 15:41.10 | FireMac | kk |
| 15:41.18 | FireMac | so it's in asterisk trunk |
| 15:41.35 | Corydon76-dig | Why are you running trunk? |
| 15:41.52 | FireMac | what should it be? |
| 15:41.55 | Corydon76-dig | Running trunk is not advised, unless you're a developer |
| 15:41.58 | Corydon76-dig | branches/1.4 |
| 15:42.06 | FireMac | ooh ok |
| 15:42.19 | FireMac | didnt compile them yet |
| 15:42.38 | Corydon76-dig | and especially not zaptel trunk. Zaptel trunk DOES NOT WORK |
| 15:42.43 | devel | oh, that leads me to another question, short of doing diffs against the code, is there a "changelog"? i didn't seem to find one... |
| 15:42.50 | FireMac | i noticed that |
| 15:42.59 | Corydon76-dig | devel: CHANGES |
| 15:43.15 | Corydon76-dig | devel: also read UPGRADE.txt |
| 15:44.08 | devel | yeah, that was a little too broad. "Changes since Asterisk 1.2" |
| 15:44.33 | devel | i mean all good info, but i was looking specifically for what had change from 1.4.11 to 1.4.12 |
| 15:45.17 | gremzoid | w00t |
| 15:45.31 | gremzoid | Corydon76-dig, do you get a medal for two birds with one stone? :P |
| 15:45.44 | Corydon76-dig | Heh, which module did you forget to load? |
| 15:45.53 | gremzoid | just the app one |
| 15:45.54 | devel | yes, i'd offer a cold beverage of sorts, but they don't ship well. |
| 15:46.11 | gremzoid | and there was data format problem with my options in the DB |
| 15:46.42 | Corydon76-dig | You could always make a donation to my favorite charity |
| 15:46.55 | FireMac | (Corydon76-dig): are there asterisk sounds in asterisk svn? |
| 15:47.10 | devel | which charity is that, Corydon76-dig |
| 15:47.27 | Corydon76-dig | FireMac: not in svn, but on http://downloads.digium.com. You can select which ones get installed with 'make menuselect' |
| 15:47.47 | Corydon76-dig | devel: https://128bit.clickandpledge.com/default.aspx?ID=13754&cid=US&a= |
| 15:48.18 | FireMac | i tried this on asterisk/1.4 i got asterisk-sounds |
| 15:48.51 | devel | consider it done, Corydon76-dig |
| 15:49.20 | *** join/#asterisk blitzrage (n=Leif@asterisk/documenteur-extraordinaire/blitzrage) |
| 15:49.20 | *** mode/#asterisk [+o blitzrage] by ChanServ |
| 15:49.34 | FireMac | (Corydon76-dig): how do i use that make menuselect? |
| 15:49.56 | Dovid | FireMac: |
| 15:49.58 | gremzoid | mmmmm now my dialplan doesn't look like such a dirty hack |
| 15:49.59 | gremzoid | :P |
| 15:50.00 | Dovid | make clean |
| 15:50.03 | Dovid | make menuselect |
| 15:50.07 | *** join/#asterisk russellb_ (n=russell@asterisk/developer-and-stable-maintainer/drumkilla) |
| 15:50.08 | Dovid | and select what u want |
| 15:50.10 | *** mode/#asterisk [+o russellb_] by ChanServ |
| 15:50.24 | FireMac | ooh |
| 15:50.32 | FireMac | then i guess make install. |
| 15:50.38 | Corydon76-dig | Correct |
| 15:50.38 | FireMac | all that in asterisk dir? |
| 15:50.55 | Corydon76-dig | No, it downloads what you select on the fly at install time |
| 15:50.56 | Dovid | should be |
| 15:51.23 | gremzoid | i just came up with a million dollar idea... a service kinda like paypal, except you can send someone else beer anonymously |
| 15:51.30 | Dovid | haha |
| 15:51.37 | Corydon76-dig | Not everybody drinks beer |
| 15:51.44 | Dovid | gremzoid: I am willing to beta test. send me some ;) |
| 15:52.03 | gremzoid | i imagine it would be very popular amongst programmers... |
| 15:52.11 | Dovid | lol |
| 15:52.12 | Corydon76-dig | However, if you have a nice 70 year old Scotch... |
| 15:52.20 | Dovid | the guys at digium preffer red bull ;) |
| 15:52.32 | gremzoid | crikey thats old |
| 15:52.36 | Corydon76-dig | putnopvut and I both like a good Scotch |
| 15:52.46 | gremzoid | Corydon76-dig, the link above is broken |
| 15:52.56 | devel | indeed, Corydon76-dig that's a quality beverage. |
| 15:53.15 | Corydon76-dig | gremzoid: shouldn't be, did you select all of it? |
| 15:53.20 | devel | i got to that link fine, gremzoid |
| 15:53.47 | gremzoid | "Firefox has detected that the server is redirecting the request for this address in a way that will never complete." |
| 15:54.21 | Dovid | gremziod: for these cases i use IE ;) |
| 15:55.44 | Corydon76-dig | gremzoid: strange, did you get the whole URL? |
| 15:56.40 | Corydon76-dig | gremzoid: comes up fine in both Firefox and Konqueror for me |
| 15:56.48 | Corydon76-dig | gremzoid: or are you rejecting cookies? |
| 15:57.25 | Corydon76-dig | Firefox 2.0.0.6 here |
| 15:57.51 | gremzoid | ahh possibly the later |
| 15:57.54 | Corydon76-dig | gremzoid: if you prefer, www.freenode.net is also a favorite charity |
| 15:58.31 | gremzoid | what country are you in? |
| 15:58.40 | Corydon76-dig | US |
| 15:58.47 | *** part/#asterisk theHub (n=karl@ool-43577a99.dyn.optonline.net) |
| 16:00.37 | gremzoid | ah! in that case, carbon offsets it is... ;P |
| 16:03.27 | Corydon76-dig | unlikely to make a difference next to the 6.0kVA of UPS running next to me, but oh well |
| 16:04.50 | Corydon76-dig | btw, in the case of the former, I manage the finances of that charity... |
| 16:05.17 | devel | yes, we put CF bulbs through our NOC. it's considerably... dimmer. |
| 16:05.44 | Corydon76-dig | It's not noticeably dimmer in my office |
| 16:05.58 | Corydon76-dig | In fact, I thought it actually looked brighter |
| 16:09.20 | gremzoid | we put a heap of energy saving lights in when we renovated... |
| 16:09.41 | gremzoid | the one in the kitchen above the sink is always burning out... and never last more than a few months |
| 16:11.35 | devel | they are certainly a harsher light. i guess in the NOC we went from 150w bulbs down to little 75w equiv CF, so that's most of the dimness. |
| 16:11.48 | devel | we are all about efficiency though, so we live with it. |
| 16:21.19 | *** join/#asterisk saftsack (n=saftsack@pD9E047BA.dip.t-dialin.net) |
| 16:23.08 | Yourname`` | The Green NOC! |
| 16:33.31 | CCFL_Man2 | why are 684A subsets so expensive? |
| 16:46.25 | WilliamK | devel, I'm assuming your using recessed lighting? what I did in my kitchen was use the socket extenders and brought it down an inch which made ALOT of difference |
| 16:47.28 | devel | we have recessed in our offices, but in the NOC they're "open" (it's just a concrete vault with conduit surface mounted) |
| 16:48.33 | devel | curious why you've had trouble with one gremzoid (failing) i've had most of mine in place for about five years now, have never replaced one. |
| 16:49.29 | *** join/#asterisk ssokol (n=ssokol@ip70-189-77-103.ok.ok.cox.net) |
| 16:49.42 | gremzoid | ... it could be a wiring problem... i'm not an electrician, just something i've observed (i'm the only one in the house tall enough to reach it :P) |
| 16:50.01 | ssokol | Anybody here had any luck compiling zaptel on a Xen domu instance? |
| 16:50.44 | WilliamK | I've had bad luck with some of the commericial electric brand bulbs, GE ones seem to be fine |
| 16:50.58 | WilliamK | think commercial electric had a couple bad batches |
| 16:52.09 | blitzrage | ssokol: ! |
| 16:52.34 | blitzrage | I was able to compile it in VMware running CentOS 5 |
| 16:54.49 | WilliamK | dare you to grep for the word Redhat on CentOS :) |
| 17:02.32 | blitzrage | I know CentOS is Redhat. That's not a deterant |
| 17:06.04 | WilliamK | didn't say it was, just an interesting viewpoint |
| 17:09.29 | *** join/#asterisk _pepo_ (n=Pepo@190.10.187.20) |
| 17:09.34 | _pepo_ | hi friends |
| 17:10.04 | tzafrir | ssokol, you have a problem building it? |
| 17:10.12 | tzafrir | Or using it? |
| 17:10.51 | tzafrir | WilliamK, /etc/redhat-release ? |
| 17:13.01 | _pepo_ | please, how do I forward (if no reply) a call from my Asterisk-A to other Asterisk-B? |
| 17:14.46 | *** join/#asterisk fakhir (n=fakhir@unaffiliated/fakhir) |
| 17:14.58 | devel | _pepo_, Dial() has a timeout argument you could use. |
| 17:15.22 | WilliamK | I was thinking more like more /proc/version |
| 17:21.49 | *** join/#asterisk mrgoby (n=mrgoby@snapcrafty.com) |
| 17:22.27 | mrgoby | hi, i'm looking into installing astlinux (i think) on a gumstix, has anyone here done this before, or does annyone know where a decent howto is located ? |
| 17:23.58 | *** join/#asterisk f00bar80 (n=mina@196.218.135.135) |
| 17:24.28 | f00bar80 | some info about Asterisk prepaid applications ? |
| 17:25.41 | Dovid | anyone know if there is a french and russian language package for asterisk ? |
| 17:27.00 | *** join/#asterisk Kernel_Core (n=I@83.217.236.20) |
| 17:27.08 | Kernel_Core | hi all |
| 17:27.41 | Dovid | hello kernel |
| 17:28.09 | Kernel_Core | I have question .... is Speex ABR=8000 with complexity =10 , it's MOS higher than g729a ? |
| 17:28.20 | devel | Dovid, http://downloads.digium.com/pub/telephony/sounds/ |
| 17:28.24 | devel | looks like fr at least |
| 17:28.28 | Dovid | thanks devel |
| 17:28.51 | *** join/#asterisk nighty^ (n=nighty@sushi.rural-networks.com) |
| 17:29.44 | f00bar80 | ppl , any guide/more info regarding giving an asterisk's phone cards service ? |
| 17:31.40 | *** join/#asterisk TrentCreek (n=tjones14@cpe-70-117-207-168.rgv.res.rr.com) |
| 17:31.56 | *** join/#asterisk asdx (n=diego@adsl-148-18.click.com.py) |
| 17:32.03 | f00bar80 | am i off-topic ? |
| 17:32.29 | TrentCreek | what was the topic? |
| 17:36.43 | f00bar80 | any info regarding the prepaid cards , " how to " |
| 17:37.28 | _x86_ | f00bar80: voip-info.org has a few howtos on calling cards |
| 17:38.07 | TrentCreek | what info you looking for> |
| 17:38.15 | TrentCreek | I am trying to set one up myself |
| 17:38.56 | f00bar80 | TrentCreek: how it works , what it needs , how to implement it ...etc |
| 17:40.32 | *** join/#asterisk CunningPike (n=CunningP@S010600095b33697f.vc.shawcable.net) |
| 17:40.43 | TrentCreek | AstBill has an open source project |
| 17:41.07 | TrentCreek | As soon as I figure out how to use Asterisk I am going to set one up. |
| 17:41.55 | f00bar80 | TrentCreek: i checked this http://sourceforge.net/projects/asteriskbilling/ but i'm asking to know info and get the basic concepts at first |
| 17:42.28 | TrentCreek | All you need to get some DIDs and call termination |
| 17:42.52 | f00bar80 | TrentCreek: "DIDs call termincation" ? |
| 17:43.01 | TrentCreek | but, most call termination services I have found want you to buy a minimum of 10,000 minutes a day |
| 17:43.39 | f00bar80 | TrentCreek: did you check the one i sent to you ? of sf. ? |
| 17:44.04 | TrentCreek | DIDs are the phone line numbers so people can call your box |
| 17:44.06 | TrentCreek | not yet |
| 17:44.46 | TrentCreek | call termination is what you get to be able to make outbound calls, |
| 17:45.58 | f00bar80 | TrentCreek: and what about the hardware i'll need ? which type of server in which bandwidth ... so on ? |
| 17:46.36 | _x86_ | hmm |
| 17:46.41 | _x86_ | voicemail with IMAP storage? |
| 17:46.44 | _x86_ | that's hawt |
| 17:46.54 | TrentCreek | you need 83KB per call |
| 17:47.10 | f00bar80 | TrentCreek: in a total of ? |
| 17:47.13 | TrentCreek | for good quality |
| 17:47.20 | TrentCreek | or TOLL quality |
| 17:48.21 | TrentCreek | so a T1 line would get you 18 calls |
| 17:48.35 | TrentCreek | it could handle |
| 17:48.58 | f00bar80 | _x86_: voicemail with IMAP storage , this is for the server , what else ? |
| 17:49.11 | TrentCreek | since the server would only be switching traffic, it could handle hundreds of users |
| 17:49.42 | TrentCreek | a P4 would handle it fine |
| 17:51.22 | TrentCreek | Though the newest computers with DDR2 has faster bus, would be better though |
| 17:51.41 | f00bar80 | TrentCreek: which extra hardware ? asterisk itself doesn't need extra Hardware ? |
| 17:52.01 | _x86_ | f00bar80: i was just looking at the ASA's, and the latest one is for IMAP storage of voicemail... something I didn't know Asterisk was capable of doing |
| 17:52.12 | TrentCreek | That depends...what will you do about customer service? |
| 17:53.22 | f00bar80 | _x86_: ASA ? |
| 17:53.40 | TrentCreek | for me..I will handle it at server location and working to connect a SIP device to it so I can take calls. |
| 17:53.46 | f00bar80 | TrentCreek: i'm just want to give the service of TOLL calls |
| 17:54.02 | _x86_ | f00bar80: Asterisk Security Advisory |
| 17:54.04 | WilliamK | x86, there was a prob with IMAP storage from what I read previously - may be fixed byw now, but it had to do with something being malformed and crashing the * server |
| 17:54.11 | WilliamK | can't remember much without looking at the details |
| 17:54.15 | TrentCreek | yes, but what if people are havbing problems? |
| 17:54.24 | TrentCreek | and need to call? |
| 17:54.25 | _x86_ | WilliamK: right -- hence the ASA :P |
| 17:54.59 | WilliamK | yeah, I learned a bit more of some of the missing mods when I did the menuselect option |
| 17:54.59 | TrentCreek | well then no other hardware needed. |
| 17:55.10 | f00bar80 | TrentCreek: and in case that it's a remote server from " The Planet " ? |
| 17:55.15 | TrentCreek | oh..you using AsteriskNOW? |
| 17:55.16 | WilliamK | I got out of the * game back in 1.2 series and came back in the 1.4 |
| 17:55.18 | WilliamK | alot changed |
| 17:55.54 | f00bar80 | _x86_: what more than IMAP and voicemail ?> |
| 17:56.25 | TrentCreek | nothing more than a box that is connected to the net |
| 17:57.57 | TrentCreek | i would reccomend that you not use the mySQL on the same server |
| 17:58.12 | f00bar80 | TrentCreek: listen i need to know , now i'm in egypt and the any T1 server 'll not be in egypt , so that's why i'm asking about the remote server ? |
| 17:59.41 | TrentCreek | T1 is a digital line that was created to carry voice traffic |
| 18:00.11 | tzafrir | Egypt uses T1 or E1, BTW? |
| 18:00.19 | f00bar80 | TrentCreek: we don't have it here , that's why , we use to get a server from something like The planet |
| 18:01.07 | f00bar80 | tzafrir: from where did you get this info , is it for anyone to get a T1 and for how much ? |
| 18:01.33 | TrentCreek | in the US a T1 line is $350 |
| 18:02.03 | tzafrir | f00bar80, I have no info. I just asked |
| 18:02.05 | TrentCreek | so yes, you would want to get a dedicated server for yoru service. |
| 18:02.12 | TrentCreek | *your |
| 18:02.29 | TrentCreek | thePlanet would have more than a T1 |
| 18:05.13 | TrentCreek | a T1 only provides 1.5Mega Byte |
| 18:05.34 | TrentCreek | Looks like theplanet has a total of 100 Gigabytes |
| 18:05.58 | Nugget | you're getting bits and bytes confused. |
| 18:06.09 | Nugget | a t1 is 1.5 megabits per second |
| 18:06.22 | TrentCreek | yes |
| 18:06.33 | WilliamK | Nugget, thanks, I was about to start typing out a long description of that :) |
| 18:06.44 | *** join/#asterisk ESCulapio_ (n=elvyn@177stb68.codetel.net.do) |
| 18:06.48 | _x86_ | TrentCreek: depending on where you are... I can get voice T1's for $212/mo ;) |
| 18:06.53 | f00bar80 | TrentCreek: so how to plug the sip device to this server at the The Planet ? |
| 18:07.13 | Nugget | f00bar80: the same way a sip device communicates with a server anywhere else. |
| 18:07.40 | TrentCreek | you do not plug it in...it would have to communicate via the internet |
| 18:07.57 | f00bar80 | Nugget: i mean is it a service by the Planet always , or it's off-support ? |
| 18:07.58 | WilliamK | f00bar80, first you need to figure out where you want the T1 (in which city) and which area codes you want people to dialin from or are you going to be using an 800 number, and who is going to deliver the service to you |
| 18:08.43 | TrentCreek | no..the SIP device is for you to receive and make calls |
| 18:08.49 | f00bar80 | TrentCreek: it would have to communicate via the internet <---- how to ? |
| 18:08.56 | TrentCreek | Here is a great video shows you how |
| 18:08.58 | TrentCreek | http://revision3.com/systm/asterisk/ |
| 18:09.22 | TrentCreek | you can download it to see it better |
| 18:09.37 | f00bar80 | WilliamK: what's 800 number ? |
| 18:09.46 | WilliamK | if you're planning on using an 800# type service, you will need to deal with someone who's either a major carrier rep or a small RESPORG company to get the inbound 800 traffic |
| 18:10.05 | Nugget | f00bar80: at this point I think I'm just going to recommend that you find a consultant who has voip experience and pay that person to set it up for you. |
| 18:10.07 | WilliamK | 800 # is a toll-free number that allows your users to call you without them incurring charges |
| 18:10.35 | Nugget | or buy a book and start reading |
| 18:10.44 | f00bar80 | WilliamK: yes this one , but i'm asking to let them send/receive from US |
| 18:11.07 | Nugget | it's like you're asking us to teach you how to drive and you don't know what a car is yet. |
| 18:11.33 | f00bar80 | Nugget: provide me the right guide to with it by muself |
| 18:11.39 | f00bar80 | myself* |
| 18:11.53 | Nugget | everything you need to know is a google search away |
| 18:12.14 | Nugget | http://www.oreilly.com/catalog/asterisk/ |
| 18:12.15 | f00bar80 | Nugget: a start point/hints ? |
| 18:12.19 | WilliamK | F00bar80, you have a few components, and I'm going to suggest what Nugget suggested... consultant or book |
| 18:12.21 | Nugget | ~docs |
| 18:12.21 | jbot | hmm... docs is Documentation can be found at http://www.digium.com/index.php?menu=documentation or http://www.voip-info.org/wiki-Asterisk or http://www.asteriskdocs.org or http://www.oreilly.com/catalog/asterisk or http://www.asteriskguru.com |
| 18:12.21 | WilliamK | :) |
| 18:12.24 | Nugget | there. |
| 18:12.31 | Nugget | I've *provided* everything you need at this point. |
| 18:20.36 | *** join/#asterisk i3inary (i=i3inary@ip72-207-113-253.sd.sd.cox.net) |
| 18:23.22 | i3inary | hey guys hows it going. i am looking for some information on rapidvox who is a voip provider that i found here http://www.voip-info.org/wiki/index.php?page=RapidVox |
| 18:24.03 | TrentCreek | http://www.rapidvox.com/ |
| 18:24.41 | i3inary | trentcreek uh yeah i been there thanks. has anyone used them or know anyone that uses them. i been using them for a coupld weeks now and i have only had them go down one time but today i am not able to make any calls or get any emails thru to them. |
| 18:25.29 | [TK]D-Fender | i3inary, could be because virtually no-one here uses them and they suck. |
| 18:25.41 | i3inary | their rates are pretty good from what i have found and they allow unlimited channels as long as you have money to cover 2 hours of the call which is my main reason for using them. |
| 18:25.55 | Teln1100A | anyone know of a DID provider in Saudi Arabia? |
| 18:26.49 | i3inary | ok well next question would be - does anyone have any provdiers i could try out that allow unlimited channels without paying for each individual channel |
| 18:27.39 | TrentCreek | good luck on that. I know they all charge for each channel |
| 18:27.44 | [TK]D-Fender | i3inary, very few places would offer suck a product because they'd be used by telemarketers |
| 18:27.54 | i3inary | i also have a voicepulse account which i use for inbound but each channel costs a monthly fee of $20 |
| 18:28.02 | [TK]D-Fender | i3inary, and other cheap-shit fuck-offs ;) |
| 18:28.11 | [TK]D-Fender | </expletives> |
| 18:28.45 | i3inary | i see...well it is limited per se i guess to the amount of funds that you have in your account |
| 18:29.09 | i3inary | so not completely unlimited..just more flexible than a monthly fee |
| 18:29.11 | [TK]D-Fender | i3inary, true, but they don't want to hit 100% usage due to 1 guy and pissing off their OTHER clients |
| 18:29.18 | *** join/#asterisk riddlebox (n=james@75-132-225-75.dhcp.stls.mo.charter.com) |
| 18:29.33 | [TK]D-Fender | i3inary, take a look at teliax. |
| 18:32.26 | i3inary | ouch they are .02 per min to uk and china. rapidvox was .08 and 1.1 respectively. im more concerned with the dirt cheap service at this point. i do about 10k minutes a day right now and that is out of pocket for the most part. |
| 18:32.42 | JerJer | you get what you pay for |
| 18:32.49 | ESCulapio_ | I have problem with my card te120p, the LED always this red and this sharing irqI have problem with my card te120p, the LED always this red and this sharing irq |
| 18:33.02 | JerJer | make it not share an IRQ |
| 18:33.10 | i3inary | isnt that an easy cliche to use in this case...lol |
| 18:33.28 | JerJer | sure it is - turn of other shit that uses irqs |
| 18:33.53 | JerJer | like anything onboard - parallel, serial, usb, firewire etc |
| 18:34.11 | TrentCreek | i3inary: You had better find a wholesale termination service then. |
| 18:34.50 | i3inary | i guess thats what im asking for...recommendations on wholesalers. |
| 18:35.06 | i3inary | rapidvox is in effect a wholesaler i guess |
| 18:35.09 | JerJer | if you have to ask then you won't have enough volume |
| 18:35.39 | i3inary | i can have 130k minutes per day by the end of the month and double that each week there after |
| 18:35.55 | i3inary | but i need to get this sorted first...so i can ask that question right now imo |
| 18:36.04 | TrentCreek | dpretel.com has good rates |
| 18:36.08 | TrentCreek | oops. |
| 18:36.11 | TrentCreek | doretel.com |
| 18:36.31 | ESCulapio_ | JerJer, all that port already is disqualified, ( parallel, serial, usb, firewire) |
| 18:37.05 | JerJer | i3inary: if you actually had that much volume you would be driving down the road to become a CLEC or an IXC yourself |
| 18:37.16 | JerJer | so you can become a peer versus a customer |
| 18:37.25 | ESCulapio_ | but continuous sharing the port with the NIC |
| 18:37.46 | JerJer | ESCulapio_: by disqualified do you mean disabled within BIOS ? |
| 18:38.02 | i3inary | i have a different business model...that is where im headed but not right now im focusing on a different aspect right now. |
| 18:38.10 | JerJer | i3inary: or at the very least partnering directly with a CLEC or IXC |
| 18:39.08 | i3inary | definately but i need to build my volume before making these partnerships are negotiated. if you know jajah then youll understand kinda what im doing |
| 18:39.23 | JerJer | so you don't have 130k per day |
| 18:39.46 | i3inary | i can have that by the end of the month i said. i do 10k right now and im turning away a lot of business |
| 18:40.42 | ESCulapio_ | yes disabled by the bios. in the bios it reserves irq 10 and it was thinking about putting it to te120p manually |
| 18:40.43 | *** join/#asterisk jingles (n=dfbarth@39.183.dowl.anc.borealisbroadband.net) |
| 18:41.19 | JerJer | ESCulapio_: smells like you have a POS motherboard |
| 18:41.39 | JerJer | i leave everything automatic and disable everything but the NIC card |
| 18:41.55 | JerJer | and it Just Works(tm) for me |
| 18:42.18 | i3inary | and its not something that requires marketing on my part...it builds itself by nature....but im not interested in arguing these points...i just came to ask for some recommendations on cheap providers and share my current rapidvox experience (which is negative at the moment). |
| 18:42.29 | JerJer | granted I don't buy the low end crap - but i have worked with some 'embedded' stuff that i would call crap :( |
| 18:42.51 | JerJer | i3inary: you get what you pay for |
| 18:43.05 | JerJer | if you want cheap, you get cheap service, thus you provide cheap service |
| 18:43.30 | i3inary | which i do...actually i provide free service to be precise... |
| 18:43.38 | JerJer | there is no such thing as free |
| 18:43.43 | JerJer | meaning 'without cost' |
| 18:43.49 | i3inary | free international calling paid for by advertising.. |
| 18:43.56 | JerJer | you are going to have costs - who pays those costs is getting deferred |
| 18:44.06 | blitzrage | JerJer: y0! |
| 18:44.17 | JerJer | so again - if you buy cheap service you are going to get cheap service |
| 18:44.26 | JerJer | blitzrage: h0e |
| 18:44.32 | TrentCreek | Walmart provides cheap products and servces, but people keep comming |
| 18:44.42 | blitzrage | until they get lead poisoning :) |
| 18:45.05 | JerJer | TrentCreek: no wallmart provides easy access to a lot of different types of cheap products |
| 18:45.25 | i3inary | well im the reverse of walmart...i do 9k of the 10k minutes to china...heh so im giving them a cheap product back... |
| 18:45.41 | ESCulapio_ | my English is not good can respond to me in Spanish. (somebody Spanish speech) |
| 18:45.42 | i3inary | my voip has lead in it..if you will |
| 18:45.48 | ESCulapio_ | mi ingles no es bueno me pueden responder en español. (alguien habla español) |
| 18:46.43 | i3inary | anyway i have algorithms that dynamically decide which routes to use...so the fact that i get what i pay for only applies if i was using their service raw without my own code making decisions on where to route and why... |
| 18:46.44 | JerJer | i3inary: i don't know about you, but my main goal is repeat business because it is far cheaper to re-sell something to an existing customer versus being able to constantly acquire new customers |
| 18:46.50 | *** join/#asterisk qdk (n=qdk@0x573fe57e.bynqu2.broadband.tele.dk) |
| 18:47.42 | JerJer | has anyone here used Adhearsion at all? |
| 18:47.54 | i3inary | ok well im a voip engineer by trade but im not interested in selling voip service. im interested in selling my algorithms which can only be solidified under heave loads and high traffic by humans. |
| 18:48.12 | WilliamK | JerJer, yeah... Sweeper showed it to me |
| 18:48.22 | blitzrage | JerJer: plus it's easier to support less customers who pay more money |
| 18:48.30 | WilliamK | err = haven't used it though |
| 18:48.34 | JerJer | blitzrage: very much so |
| 18:48.47 | blitzrage | especially people who look for good service, and not just the cheapest product -- those people are even harder to deal with I find |
| 18:48.55 | WilliamK | :) |
| 18:48.55 | blitzrage | the cheapest people seem to be the most vocal |
| 18:49.08 | JerJer | to add to that, a premium service has less potential problems thus less overall support requirements |
| 18:49.17 | blitzrage | exactly |
| 18:50.03 | WilliamK | premium services also have less customers, although a higher revenue stream |
| 18:50.13 | JerJer | true |
| 18:50.30 | blitzrage | that was basically the point I think I was trying to make :D |
| 18:50.52 | i3inary | well speaking from direct experience there are more people than youll ever be able to count that want free service...so i say again. even though you get what you pay for is a catchy cliche its not always true...the avg joe gets what he pays for and thats not me...so like i said before im just looking for dirt cheap voip with unlimited channels or something similar to rapidvox. |
| 18:51.23 | JerJer | then be very prepared to always be finding new providers |
| 18:51.28 | blitzrage | amen |
| 18:51.31 | i3inary | i am prepared |
| 18:51.35 | WilliamK | blitz, I only yelled at VZ when they took my FiOS down for a few more hours than really acceptable |
| 18:51.49 | WilliamK | but then again, I'm paying ~200.00 month for it |
| 18:52.03 | blitzrage | WilliamK: Rogers Internet in Mississauga was soooo bad that it would go down at least once a week, and sometimes those were like 6-8 hours at a time |
| 18:52.14 | JerJer | i'm paying a hundred for crappy so-called 10 meg cable (which I get almost 5) |
| 18:52.28 | blitzrage | I'm paying $160 for 10meg cable + HDTV |
| 18:52.32 | JerJer | i want my dual T-1s back :( |
| 18:52.35 | WilliamK | this week was really the 1st time since I had the service installed that I had some major issues |
| 18:52.39 | JerJer | blitzrage: in funny money? |
| 18:52.55 | blitzrage | JerJer: I wish... real CAD dollars |
| 18:53.07 | TrentCreek | wow..I get Road Runner 10MB down/ 1.5Mb up for only $54 a month |
| 18:53.09 | WilliamK | service went down on Monday morning, and they came to replace the ONT, installed a defective ONT, and then had to troubleshoot it from there |
| 18:53.10 | JerJer | that's funny money - loonie and toonie :P |
| 18:53.30 | blitzrage | TrentCreek: that's basically what I pay, but then I add HDTV on top of that which is about $100 |
| 18:53.37 | blitzrage | JerJer: and the foonie! :) |
| 18:53.50 | JerJer | hmmm is that 5 ? |
| 18:54.07 | TrentCreek | I speed tested mine am I get 9MB down and 900k up |
| 18:54.08 | blitzrage | ya, but it doesn't exist |
| 18:54.18 | JerJer | a 5 dollar coin would be sweet - i think |
| 18:55.04 | blitzrage | I'm on a new router I think |
| 18:55.18 | blitzrage | I'm in a totally different subnet from before I left last month |
| 18:55.27 | blitzrage | 18ms pings to Michigan though! |
| 18:55.42 | blitzrage | 7800/797kb/s here |
| 18:55.48 | blitzrage | works find for me |
| 18:56.00 | blitzrage | latency is more important to me than speed |
| 18:56.07 | blitzrage | s/find/fine |
| 18:57.00 | JerJer | yes, yes it is |
| 18:57.18 | TrentCreek | latency is fine....its the jitter |
| 18:58.46 | blitzrage | at least you can fix that |
| 18:58.50 | blitzrage | (reasonably) |
| 18:58.54 | TrentCreek | true, true |
| 18:59.01 | [TK]D-Fender | Solid 5000/800 for me.... might be able to gt higher with ADSL2+ but really can't be bothered for the expense. |
| 18:59.09 | blitzrage | if my latency is 18ms, if I have to ad 5-6ms of jitterbuffer, not so bad |
| 18:59.16 | blitzrage | for sure |
| 18:59.30 | i3inary | anyone ever deal with calculating erlangs for asterisk hardware or know of a resource that lists erlang to asterisk cpu hardware stats? |
| 19:00.14 | blitzrage | I prefer to actually test it instead of dealing with theoretical numbers |
| 19:00.14 | anonymouz666 | blitzrage: 5-6ms? how do you calc that? |
| 19:00.15 | blitzrage | SIPp |
| 19:00.26 | *** join/#asterisk draygon (n=anthony@cpe-76-186-249-86.tx.res.rr.com) |
| 19:00.27 | *** join/#asterisk _MrSeb_ (n=sebax@62.123.130.130) |
| 19:00.30 | blitzrage | anonymouz666: that would just be the size of the buffer |
| 19:00.46 | blitzrage | I just made up random numbers |
| 19:00.56 | anonymouz666 | ah ok |
| 19:01.24 | blitzrage | lol, the hooters swimsuit pageant just came on |
| 19:01.29 | TrentCreek | i3inary: I just looked up the rates for rapidvox..very low..how is the voice quality? |
| 19:01.43 | _MrSeb_ | Hi, has someone installed asterisk on Debian? It's sufficent asterisk package or I must download addon to compile too? |
| 19:01.49 | TrentCreek | que quiere? |
| 19:02.24 | i3inary | i didnt have many complaints from my users about it. i used it quite a bit myself and it was solid. only problem is them being down for me atm. |
| 19:02.37 | ssokol | blitzrage, tzafrir: First I got an error message telling me that the kernel source couldn't be found. |
| 19:02.51 | blitzrage | ssokol: which distro? |
| 19:02.53 | ssokol | (sorry for the 90 minute gap) |
| 19:02.56 | blitzrage | ssokol: np |
| 19:02.58 | blitzrage | it's sunday |
| 19:02.59 | ssokol | blitzrage: CentOS 5 |
| 19:03.04 | blitzrage | ssokol: SMP kernel? |
| 19:03.13 | blitzrage | you might need 'yum install kernel-smp-devel' |
| 19:03.13 | tzafrir | ssokol, on which platform? centos5? |
| 19:03.16 | blitzrage | that has burned me before |
| 19:03.24 | ssokol | The xen kernel. |
| 19:03.26 | i3inary | trentcreek - it all depends on their peers i suppose. i heard negative things things only with certain countries. |
| 19:03.28 | blitzrage | aha |
| 19:03.29 | tzafrir | yum install kernel-xen-devel |
| 19:03.30 | blitzrage | that makes sense |
| 19:03.33 | ssokol | x86_64 |
| 19:03.36 | tzafrir | or something similar |
| 19:03.41 | ssokol | Ah! |
| 19:03.44 | ssokol | ok... |
| 19:03.47 | blitzrage | ya, that's got me before |
| 19:04.03 | TrentCreek | i3inary: yeah I see the only contact is through email |
| 19:04.16 | i3inary | yeah which is rejected for me today. |
| 19:04.23 | blitzrage | if you install zap hardware into the host xen system, do the VMs have access to it? |
| 19:04.52 | tzafrir | I think you have to tell Xen to explicitly allow it. Not sure |
| 19:05.01 | i3inary | i know they arent the only provider that does what they do. i mean i just came across them on the wiki and didnt have any problems so i kept using them after i tested them. |
| 19:05.02 | blitzrage | but it's possible? |
| 19:05.51 | i3inary | but i need to secure accounts with at least 4 more providers that have similar rates and channel limitations. |
| 19:06.43 | TrentCreek | i have seen others that do the same |
| 19:07.08 | TrentCreek | just cannot tecall them because i have been looking at so many of them |
| 19:07.33 | TrentCreek | have you tried this site? http://www.voipproviderslist.com/ |
| 19:07.41 | TrentCreek | THey list wholesale companies |
| 19:07.52 | i3inary | sweet im checking it now |
| 19:08.08 | *** join/#asterisk techie (n=techie@adsl-76-214-3-9.dsl.lsan03.sbcglobal.net) |
| 19:09.42 | ssokol | blitzrage, tzafrir: seems to compile now, but when I go to modprobe ztdummy or zaptel, it tells me "not found" |
| 19:09.57 | blitzrage | make distclean ; ./configure ? |
| 19:09.57 | ssokol | Looks like it installed it in the wrong place in /lib/modules |
| 19:10.05 | ssokol | yep, did that already |
| 19:10.08 | blitzrage | ah |
| 19:10.09 | blitzrage | hrmmm |
| 19:10.20 | *** join/#asterisk rmayorga (n=rmayorga@unaffiliated/rmayorga) |
| 19:10.46 | ssokol | I jacked around making symbolic links before tzafrir told me about the "other" kernel source, so I may have hosed it myself. |
| 19:10.58 | ssokol | Joy of xen: i can re-create it in a mater of minutes!~ |
| 19:11.22 | blitzrage | hot :) |
| 19:12.59 | draygon | anyone know a good host for a server? |
| 19:13.02 | Strom_M | hello |
| 19:13.40 | TrentCreek | lots of them |
| 19:13.50 | TrentCreek | spamspace. theplanet |
| 19:14.01 | *** join/#asterisk Boones (n=bytewalk@port-212-202-42-40.dynamic.qsc.de) |
| 19:14.06 | TrentCreek | err...rackspace |
| 19:14.12 | sheppard | severbeach |
| 19:14.14 | draygon | spamspace? |
| 19:15.08 | TrentCreek | yeah their security for a long time sucked and got turned into zombies for spam, and most spam came from them. They have since cleaned it up |
| 19:17.34 | tzafrir | ssokol, well, vserver / openvz is nicer... |
| 19:20.18 | *** join/#asterisk russellb_ (n=russell@asterisk/developer-and-stable-maintainer/drumkilla) |
| 19:20.18 | *** mode/#asterisk [+o russellb_] by ChanServ |
| 19:21.19 | TrentCreek | i3inary>: I sent an email to 'inquiries@rapidvox.com' and it has not bounced |
| 19:21.35 | *** join/#asterisk ChanR (n=ichanner@72.252.126.19) |
| 19:22.23 | i3inary | yeah the inquiries didnt bounce for me either the membersupport one did |
| 19:22.41 | i3inary | which is what you get to see after you log in |
| 19:22.47 | i3inary | ooops...cat is out of the bag |
| 19:22.49 | i3inary | heh |
| 19:23.28 | TrentCreek | yeah i already logged in |
| 19:24.30 | TrentCreek | i think I will test them out..is it back on? |
| 19:25.15 | i3inary | actually you testing them would be a good test...maybe its just my account |
| 19:25.36 | i3inary | but i have monies in there so no reason i shouldnt be able to make calls |
| 19:26.24 | i3inary | my iax2 peer has been up the whole time also.. |
| 19:26.42 | i3inary | just getting pbx_spool.c:341 attempt_thread: Call failed to go through, reason 1 |
| 19:27.03 | i3inary | and i hear nothing...no ringing or telco message |
| 19:28.09 | *** join/#asterisk Mr_Varmit (n=varmit@rrcs-64-183-163-178.west.biz.rr.com) |
| 19:28.42 | TrentCreek | they do not even have a "system status" or nothing" |
| 19:29.10 | TrentCreek | have you tried restarting the server? |
| 19:29.30 | i3inary | yep |
| 19:29.40 | TrentCreek | Seems i would find a another company fast if you use 10,000 minutes a day up |
| 19:29.49 | i3inary | i did a restart now when i saw hundreds of failed calls flying by |
| 19:29.51 | TrentCreek | that =s lots of angry customers |
| 19:29.59 | i3inary | they cant be mad if its free |
| 19:30.02 | i3inary | :) |
| 19:30.05 | TrentCreek | oh |
| 19:30.16 | Mr_Varmit | is there a way to get the voicemenu to just play a notice and wait for a input for what extention to go to? |
| 19:30.18 | i3inary | makes for a low stress environment too |
| 19:30.18 | TrentCreek | i need to use your service also then |
| 19:30.22 | i3inary | lol |
| 19:30.57 | TrentCreek | i need to peer my asterisj with yours ;-) |
| 19:31.08 | i3inary | hahah not till my audio ads are in place |
| 19:32.21 | Mr_Varmit | ive got answear the call.....what do i need to get it to play a custom recording i have |
| 19:32.32 | Mr_Varmit | then allow input for a extention |
| 19:32.54 | TrentCreek | you set it up in the dial plan |
| 19:33.02 | anonymouz666 | damn func_odbc is nice. I am reading the chapter. |
| 19:33.17 | anonymouz666 | bye to Mysql() calls |
| 19:33.34 | TrentCreek | tthere is a Playback() function |
| 19:33.54 | TrentCreek | Playback(name_of_file) |
| 19:34.54 | TrentCreek | try the tutorial video here http://revision3.com/systm/asterisk/ |
| 19:35.03 | Mr_Varmit | TrentCreek thank you |
| 19:35.11 | TrentCreek | they pla back a monkey sound on it |
| 19:36.30 | TrentCreek | i3inary: ads? I do recall a company tried that during the .com boom....well i am sure you know what happened |
| 19:36.36 | *** join/#asterisk famicon (i=redz@c51447ddc.cable.wanadoo.nl) |
| 19:36.54 | *** join/#asterisk KuJaX (n=kuj@c-67-164-251-181.hsd1.ut.comcast.net) |
| 19:37.22 | i3inary | heh i guess the fact that someone else failed means i should just give up? |
| 19:38.04 | TrentCreek | nope |
| 19:38.06 | *** join/#asterisk ectospasm (n=ectospas@c-68-62-214-39.hsd1.al.comcast.net) |
| 19:38.12 | i3inary | good i was hoping youd say that |
| 19:38.16 | TrentCreek | I think another company is doing it now |
| 19:38.29 | i3inary | im sure there are others doing it |
| 19:38.51 | i3inary | i dont want to have to have support the whole worlds free calls...do i? |
| 19:39.04 | TrentCreek | Me, I don't have the patience for such a think, just get me connected. If it is important enough, cost is no object |
| 19:39.27 | i3inary | lol youd rather hear a ringing sound than a deal that your interested in? |
| 19:39.32 | TrentCreek | I just sent to memebersupport. Not returned yet |
| 19:41.20 | i3inary | lets put it this way...i been able to support calls to 29 countries with adsense advertising alone no audio ads. then i got china cloned and the ball game changed. |
| 19:42.38 | i3inary | the only reason my site got cloned is because i allowed it with my call api...but i didnt expect it to be so popular so fast |
| 19:43.13 | i3inary | did your testcall go thru? |
| 19:43.31 | TrentCreek | i have not even set it up up |
| 19:43.34 | TrentCreek | yet |
| 19:43.48 | TrentCreek | let me do that |
| 19:48.00 | KuJaX | Does anyone here run a program like Hamachi VPN to connect to their asterisk box with a phone outside of the local network? |
| 19:50.12 | TrentCreek | i3inary: now what was that command to restart Astrisk? |
| 19:51.57 | i3inary | restart now |
| 19:52.29 | i3inary | i think i figured out why my email was bouncing...i was sending them an email from an account that wasnt registered with them |
| 19:54.36 | TrentCreek | i3inary: its your account |
| 19:54.54 | TrentCreek | my call was sucessful |
| 19:56.24 | i3inary | ohh thats good news and bad news i guess |
| 19:56.25 | i3inary | heh |
| 19:56.47 | TrentCreek | or it could be problem with your server |
| 19:57.06 | i3inary | the debug trace looks good...they accept the call |
| 19:57.22 | i3inary | so my login works |
| 19:57.45 | Kernel_Core | KuJaX: I tried Hamachi 2 years ago... it was crap |
| 19:58.01 | KuJaX | Kernel_Core: How do you go about connecting to your * box remotely? |
| 19:58.19 | TrentCreek | Secure Shell |
| 19:58.41 | i3inary | download putty and connect with ssh |
| 19:58.48 | Kernel_Core | my box has Valid iP address + Static iP address + SSH ! |
| 19:59.10 | TrentCreek | make sure the SSH service is running and/or installed |
| 19:59.50 | KuJaX | TrentCreek/i3inary: Wouldnt I have to open up ports within iptables? |
| 20:00.06 | i3inary | yeah port 22 |
| 20:00.24 | TrentCreek | possible, if it is closed off. I just keep the firewall off |
| 20:00.30 | *** join/#asterisk tecnico (n=tecnico@user-24-214-56-217.knology.net) |
| 20:00.35 | i3inary | well trent i just added more funds and my calls are working now...maybe they had an accounting issue |
| 20:00.55 | i3inary | back in business but i still need more providers like them |
| 20:01.03 | KuJaX | How about connecting into the box with a phone so that you can use your extension remotely? |
| 20:01.11 | TrentCreek | oh great..yeah you may want to check into that...maybe because the amount of minutes you use |
| 20:01.40 | i3inary | yeah my email wend thru and ill have to follow up with them. |
| 20:01.52 | Kernel_Core | KuJaX: you need to install FreePBX or some application like that |
| 20:01.53 | TrentCreek | yes you can do that.. |
| 20:02.26 | TrentCreek | i3inary: Do they offer better pricing on your 10k minutes a day? |
| 20:02.54 | i3inary | well i just saw their wholesale offer today after poking around their site |
| 20:03.03 | i3inary | so not as of now..im just another guy |
| 20:03.07 | ESCulapio_ | already the card te120p this not sharing irq with another device, but continuous the red LED, that I can do in this case |
| 20:03.40 | TrentCreek | yeah check into that... |
| 20:04.26 | TrentCreek | but even so..I saw another company that has crappy rates and they call themselves "wholesale" and reuire a minimum of 10k minutes a day |
| 20:05.01 | i3inary | oh yeah thats what im looking for...i really need a good rate to china...that is where people are going nutz |
| 20:05.16 | i3inary | 1.1 cents is ok...but i know i can get better |
| 20:06.22 | TrentCreek | did you find anything on the link I gave you? |
| 20:06.23 | ESCulapio_ | who can help to my card te120p me always has the ignited red LED, she never synchronizes with the supplier |
| 20:06.36 | ESCulapio_ | ? |
| 20:07.06 | KuJaX | So I can't setup remote extensions that are not in the physical location of the asterisk box? |
| 20:07.46 | TrentCreek | sure u can |
| 20:08.54 | i3inary | im still digging thru that link not exactly easy to find rates you have to go to each site |
| 20:09.01 | TrentCreek | yeah i know |
| 20:09.03 | i3inary | or channel policy |
| 20:10.15 | wwalker | KuJaX: they have to be able to route to the asterisk box, unimpeded, but they can be remote. |
| 20:13.34 | KuJaX | wwalker: have you ever successfully implemented a remote extension that isnt on the local network? |
| 20:14.55 | riddlebox | KuJax, I had a friend who had a sipura box at his house, which connected to my asterisk box, and he pulled dial tone from me, also other friends use sip phones on their computers to connect to my asterisk box |
| 20:16.02 | *** part/#asterisk techie (n=techie@adsl-76-214-3-9.dsl.lsan03.sbcglobal.net) |
| 20:16.30 | *** join/#asterisk fakhir (n=fakhir@unaffiliated/fakhir) |
| 20:19.13 | KuJaX | riddlebox: did you do so by just using port forwarding on the router and ip tables on the asterisk linux box? |
| 20:19.43 | TrentCreek | Anyone here ever used Asterisk Prepaid Billing Application or AstBill? |
| 20:19.57 | *** part/#asterisk pkunkra (n=chris@cpe-74-73-28-89.nyc.res.rr.com) |
| 20:20.38 | riddlebox | KuJaX, I just setup asterisk and port forwarding on my router, then setup his router to do port forwarding for sip and a couple other ports, to go to the sipura box, and it works perfectly |
| 20:23.25 | wwalker | KuJaX: yes. offices in different cities :) 1 asterisk server, all calls SIP |
| 20:24.14 | wwalker | i3inary: so what are you looking for from a provider? |
| 20:26.26 | *** join/#asterisk saftsack (n=saftsack@pD9E047BA.dip.t-dialin.net) |
| 20:27.14 | i3inary | i guess im basically concerned with rates and simultaneous channels |
| 20:27.35 | KuJaX | wwalker and riddlebox: how is the voice quality though? any latency issues involved? |
| 20:28.01 | *** join/#asterisk davevg-btwtech (n=davevg-b@nj-67-76-177-147.sta.embarqhsd.net) |
| 20:28.21 | riddlebox | good |
| 20:28.44 | wwalker | KuJaX: specifically what are you trying to do? I set up the separate offices using a pair of WRT-54Gs running OpenVPN so that there would be a routable network between the two private networks. |
| 20:29.34 | wwalker | KuJaX: voice quality, no problems, no noticable latency. ping times are 25 ms between the offices. |
| 20:30.10 | KuJaX | wwalker: I have a trixbox server (freepbx and sugarcrm combo is why we choose it). It is at our main office. We are going to be hiring someone that we want to have connect in remotely (he is in the same state, just not the same office). |
| 20:30.48 | KuJaX | We want him to have access to sugarcrm (it is PHP/MySQL/HTML based) but also, just as importantly, be able to tie into the asterisk box so that he can have his phone and extention remotely, we can transfer calls to him, etc just like he was sitting right next to us. |
| 20:31.53 | KuJaX | The router at the office is a Buffalo router running tomato firmware |
| 20:32.11 | *** join/#asterisk hmmhesays (n=Neg@24-119-176-74.cpe.cableone.net) |
| 20:32.31 | wwalker | KuJaX: should be no problem. Just get him access to the network via OpenVPN. Not familiar with the Buffalo |
| 20:33.34 | *** join/#asterisk pnlarsson (n=pnlarsso@c83-248-12-187.bredband.comhem.se) |
| 20:34.03 | KuJaX | OpenVPN works on the router level/ |
| 20:34.04 | KuJaX | ? |
| 20:34.33 | KuJaX | because the problem I am having is understanding how a phone will connect to a VPN when there are no settings within the phone for VPN login/password |
| 20:35.03 | i3inary | wwalker: do you have any providers to recommend to me? |
| 20:36.30 | *** join/#asterisk mitcheloc (n=mitchel@adsl-67-127-235-238.dsl.irvnca.pacbell.net) |
| 20:37.52 | KuJaX | Does that make sense wwalker? |
| 20:47.04 | wwalker | KuJaX: his "office" should have a router doing VPN so everything in his office can see everything in your office. |
| 20:48.11 | KuJaX | and you use the WRT-54Gs huh? When you say "running OpenVPN" are you saying thta the WRT-54Gs is running OpenVPN or the computers on each side of the network? |
| 20:48.46 | wwalker | <bias> I'm both looking to understand what folks want, and then to understand if the company I work for has decent solutions that meet folks needs </bias> |
| 20:49.46 | wwalker | the wrt's are the gateways for both offices. they are both running openvpn. None of the computers run OpenVPN. |
| 20:51.25 | wwalker | i3inary: I just left a job where we did nearly 1M minutes/mo and were growing, so it's a completely different scenario than most people trying to do SIP |
| 20:53.41 | KuJaX | Okay, so if i undertand you correctly, the wrt's are running a third party software OPENVPN and are both gateways. So basically the two routers are connected to each other through the internet which then makes both LAN's like one LAN? |
| 20:53.58 | KuJaX | so even devices (such as phones) are acting like they are all connected to the same switch/router? |
| 20:58.30 | wwalker | KuJaX: makes them both like 1 routed lan, yes, but not one network segment (they are on totally different subnets (172.16 and 10.) |
| 20:58.35 | *** join/#asterisk brut- (n=brut@66.173.4.254) |
| 21:17.56 | *** join/#asterisk TrentCreek (i=GeekBoy@cpe-70-117-207-168.rgv.res.rr.com) |
| 21:20.20 | *** part/#asterisk pnlarsson (n=pnlarsso@c83-248-12-187.bredband.comhem.se) |
| 21:32.07 | *** join/#asterisk lesouvage (n=lesouvag@cc341200-a.assen1.dr.home.nl) |
| 21:39.21 | *** join/#asterisk mltlnx (n=mltlnx@cpe-72-225-244-190.nyc.res.rr.com) |
| 21:40.39 | mltlnx | Can someone please help me locate files for a Polycom IP-330, my vendor is not available until Tuesday? |
| 21:41.24 | *** join/#asterisk b_d (n=brian@209.240.42.143) |
| 21:41.32 | TrentCreek | Who takes a day off on Columbus day? |
| 21:41.57 | mltlnx | Thats what im saying....I'm workin |
| 21:42.14 | *** join/#asterisk zeedo (n=zeedo@reboot-robot.net) |
| 21:43.09 | TrentCreek | sounds like need to find a new vendore |
| 21:43.15 | riddlebox | lol I wish we could, but our customers would kill us |
| 21:44.41 | riddlebox | I am excited my boss is looking at us selling asterisk servers! |
| 21:45.44 | TrentCreek | why ot sell them your self and make yourself rich instead of him? |
| 21:46.41 | *** join/#asterisk jm|laptop (n=jm|home@zen.jamiem.com) |
| 21:46.47 | riddlebox | because I like to get a paycheck from someone else, and also I know nothing about selling, I just know how to work on the systems |
| 21:48.13 | TrentCreek | Anyone here used Asterisk Prepaid Billing Application, or AstBill? |
| 21:48.30 | riddlebox | sorry I havent |
| 21:49.32 | TrentCreek | dammit Jim |
| 21:52.24 | hmmhesays | lol |
| 21:52.52 | hmmhesays | i always just wrote my own prepaid stuff |
| 21:53.01 | hmmhesays | you can do it pretty easily in like 100 lines in the dialplan |
| 21:53.07 | hmmhesays | with func_odbc |
| 21:54.33 | hmmhesays | query the database for a route, rate and user, then write the results after the call is over |
| 21:54.35 | *** join/#asterisk russellb_ (n=russell@asterisk/developer-and-stable-maintainer/drumkilla) |
| 21:54.35 | *** mode/#asterisk [+o russellb_] by ChanServ |
| 21:55.54 | hmmhesays | super easy mang |
| 21:57.47 | hmmhesays | theres about a million ways you could do it though |
| 21:59.23 | *** join/#asterisk lesouvage (n=lesouvag@cc341200-a.assen1.dr.home.nl) |
| 22:01.16 | TrentCreek | yeah but I need Web service |
| 22:01.26 | TrentCreek | and number generation |
| 22:01.48 | hmmhesays | eh, so write a front end for it |
| 22:01.58 | hmmhesays | you can dreamweaver something pretty up in about 30 minutes |
| 22:02.41 | TrentCreek | I don't have experence to write one |
| 22:08.42 | TrentCreek | but maybe any of you have free extra time to donate ;-) |
| 22:17.06 | *** join/#asterisk PepOSX (n=pepOSX@190.72.151.242) |
| 22:27.48 | *** join/#asterisk r0d3nt (i=nobody@foster.stonedcoder.org) |
| 22:38.21 | *** join/#asterisk ToTo (n=ToTo@host75-142-dynamic.8-87-r.retail.telecomitalia.it) |
| 22:39.43 | *** join/#asterisk [hC] (n=hardcore@S01060016b61c8983.vf.shawcable.net) |
| 22:39.59 | *** join/#asterisk russellb_ (n=russell@asterisk/developer-and-stable-maintainer/drumkilla) |
| 22:39.59 | *** mode/#asterisk [+o russellb_] by ChanServ |
| 22:46.54 | *** join/#asterisk famicon (i=redz@c51447ddc.cable.wanadoo.nl) |
| 22:48.41 | *** join/#asterisk BockBilbo (n=BockBilb@eu85-84-62-227.clientes.euskaltel.es) |
| 22:48.51 | BockBilbo | hello |
| 22:49.23 | TrentCreek | seems every is here, but off doing other things |
| 22:49.47 | BockBilbo | can anyone propose me a simple open source billing web application for asterisk? |
| 22:50.28 | BockBilbo | im looking at a2billing and asterisell, but i want a simpler program |
| 22:51.09 | FireMac | hi. where can i find asterisk log? |
| 22:51.41 | TrentCreek | hang on..I got a list somewhere |
| 22:52.32 | TrentCreek | http://www.voip-info.org/wiki/view/Asterisk+Prepaid+Applications |
| 22:52.51 | fetcher | firemac: /var/log/asterisk/cdr-csv/Master.csv |
| 22:54.30 | *** join/#asterisk Mr_Varmit (n=varmit@rrcs-64-183-163-178.west.biz.rr.com) |
| 22:55.10 | Mr_Varmit | i try to use this as my dialplan _9XXXXXXXXXXX and it will only let me dial 7 numbers..... |
| 22:55.14 | *** join/#asterisk drwelby (n=mpfister@mail.enplan.com) |
| 22:55.19 | Mr_Varmit | anyone shed some light on this? |
| 22:55.42 | BockBilbo | thanks TrentCreek, i was actually looking at this: http://www.voip-info.org/wiki/view/Open+Source+Billing+Systems |
| 22:56.17 | Mr_Varmit | i have set the If number begins with 9 and followed by 11 digits |
| 22:56.35 | Mr_Varmit | ive tried to strip the 9 and without striping.... |
| 22:57.33 | Mr_Varmit | i really dont care what calls are made....is there a string that can be put in that will allow any number to be dialed? |
| 22:57.55 | Mr_Varmit | 7 for local and 11 for long distance |
| 22:58.16 | Strom_C | Mr_Varmit: you could do _9. |
| 22:58.22 | Strom_C | which is 9 followed by one or more characters |
| 22:58.30 | Strom_C | but I would recommend you not do that |
| 22:58.53 | Mr_Varmit | theres only me and one other person here in the office |
| 22:59.00 | Mr_Varmit | we both pay the bill |
| 22:59.02 | Mr_Varmit | lol |
| 22:59.08 | Strom_C | _9. it is then |
| 22:59.13 | Mr_Varmit | :) |
| 22:59.16 | Mr_Varmit | thanks Strom_C |
| 23:00.21 | Mr_Varmit | Strom_C i just dialed, and it wont let me put the LAST number in.... |
| 23:00.29 | *** join/#asterisk jedaustin (n=chatzill@wsip-66-210-241-251.ph.ph.cox.net) |
| 23:00.30 | Mr_Varmit | i might have the strip command in there |
| 23:01.09 | Strom_C | Mr_Varmit: what kind of phone are you using |
| 23:01.17 | Mr_Varmit | polycom 500 |
| 23:01.36 | Strom_C | you also need to modify the digitmap on the polycom set |
| 23:02.46 | Mr_Varmit | where would that be on the phone? under SIP LINES? |
| 23:02.53 | *** join/#asterisk my007ms (n=my007ms@217.139.224.194) |
| 23:02.57 | Strom_C | Mr_Varmit: no no |
| 23:03.01 | my007ms | hello all |
| 23:03.02 | Strom_C | you do it in the config file |
| 23:03.48 | Mr_Varmit | i dont have a sip.cfg file |
| 23:04.11 | Strom_C | how did you configure the phone initially, then? |
| 23:04.23 | my007ms | what is this TOS in sip.conf |
| 23:04.27 | Mr_Varmit | [2-9]11|0T|011xxx.T|[0-1][2-9]xxxxxxxxx|[2-9]xxxxxxxxx|[2-9]xxxT |
| 23:04.30 | my007ms | i think i have problem with it |
| 23:04.41 | Mr_Varmit | thats whats in my phone |
| 23:04.54 | Strom_C | Mr_Varmit: ok, so modify that to match your needs |
| 23:04.56 | Mr_Varmit | Strom_C i use the web interface |
| 23:05.02 | Strom_C | Mr_Varmit: eww |
| 23:05.04 | Mr_Varmit | im not sure what that does.... |
| 23:05.19 | Strom_C | Mr_Varmit: go to polycom.com and read the admin guide |
| 23:06.39 | Mr_Varmit | Strom_C it does the same thing on the Granstream GXP 2000 |
| 23:06.46 | Mr_Varmit | it wont let me dial the last number |
| 23:06.54 | Strom_C | Mr_Varmit: read the polycom admin guide |
| 23:07.00 | Strom_C | modify the digitmap accordingly |
| 23:09.21 | wwalker | under heavy call volume, will asterisk make use of multiple cores? |
| 23:13.08 | Mr_Varmit | well ill figure it out or go back to trixbox |
| 23:13.21 | Strom_C | Mr_Varmit: fine, i'll hold your hand |
| 23:13.30 | Strom_C | Mr_Varmit: the x means "any digit" |
| 23:13.31 | *** part/#asterisk bjorkintosh (n=bjork@ip72-204-54-41.fv.ks.cox.net) |
| 23:13.34 | Mr_Varmit | well hold my nuts |
| 23:13.35 | Mr_Varmit | lol |
| 23:13.36 | Strom_C | the . means "any number of digits" |
| 23:13.44 | Mr_Varmit | i kno |
| 23:13.46 | Strom_C | the | means "new pattern match" |
| 23:13.50 | Mr_Varmit | its driving me NUTS |
| 23:13.55 | Strom_C | the T means "timeout" |
| 23:14.04 | Strom_C | so you want 9 followed by seven digits? |
| 23:14.11 | Mr_Varmit | AHHH! |
| 23:14.15 | Mr_Varmit | i get it |
| 23:14.41 | Mr_Varmit | okok...i got you ....that makes sense |
| 23:14.46 | *** join/#asterisk hellop1 (n=hellop@cpe-66-8-248-9.hawaii.res.rr.com) |
| 23:15.21 | Mr_Varmit | Strom_C thank you very much..... |
| 23:15.29 | Mr_Varmit | i appreciate the help.... |
| 23:15.46 | Mr_Varmit | ill read more up on the polycom admin guide |
| 23:16.03 | Mr_Varmit | later everyone |
| 23:16.54 | *** join/#asterisk remmo (n=junk@203.32.47.250) |
| 23:24.05 | *** join/#asterisk Qwell_ (n=north@pdpc/sponsor/digium/Qwell) |
| 23:24.05 | *** mode/#asterisk [+o Qwell_] by ChanServ |
| 23:24.27 | drwelby | Working on an AA50 here... |
| 23:24.36 | drwelby | sip show peers shows all of my phones |
| 23:24.47 | drwelby | sip show users shows nothing |
| 23:25.13 | *** join/#asterisk grimsy (n=chatzill@203-206-220-214.perm.iinet.net.au) |
| 23:25.54 | drwelby | Going through the conf files, I can't find it declaring types for any extensions |
| 23:26.26 | drwelby | If I manually edit users to be type=friend, they should show up in ship show users |
| 23:26.29 | drwelby | but they don't |
| 23:27.03 | *** join/#asterisk mltlnx (n=mltlnx@cpe-72-225-244-190.nyc.res.rr.com) |
| 23:27.33 | *** join/#asterisk adeel (n=adeel@c-24-7-132-155.hsd1.ca.comcast.net) |
| 23:28.46 | drwelby | My 7905s can call in and out, so it seems to be working |
| 23:29.04 | drwelby | It's just weird though |
| 23:31.07 | drwelby | sip show registry is empty too |
| 23:32.05 | FireMac | how do i quit, when i connect to asterisk remotely? |
| 23:32.13 | drwelby | exit |
| 23:37.26 | Strom_C | drwelby: registry is for when your asterisk box registers itself elsewhere |
| 23:38.23 | drwelby | Strom_C: oh, ok, I thought it covered phones registering too. |
| 23:38.44 | drwelby | Any idea why sip show users is blank? |
| 23:39.14 | file | because the current users.conf code simply creates peers, which work for both sending/receiving calls |
| 23:40.11 | *** join/#asterisk Sinist3r (n=Trotsky@cpe-67-49-8-68.socal.res.rr.com) |
| 23:40.48 | Sinist3r | hey guys is there a way to lower the threshold on the to allow quieter sounds to get in. |
| 23:41.23 | Strom_C | Sinist3r: i think you missed a word |
| 23:41.39 | Sinist3r | Someone calls me from a POTS line into my asterisk box, they hear me just fine, but the only problem is that I don't hear everything they say only words that are at a certain loudness will come through. |
| 23:41.54 | Sinist3r | oops |
| 23:42.01 | Sinist3r | well that should explain it |
| 23:42.18 | Strom_C | Sinist3r: is it a POTS line connected to an FXO port on your asterisk system? |
| 23:42.35 | Sinist3r | no, it comes through via a DID |
| 23:43.18 | Sinist3r | I was thinking it might be a codec issue? |
| 23:43.22 | drwelby | file: thanks, that makes me feel better |
| 23:44.04 | Strom_C | Sinist3r: which codec? |
| 23:44.48 | Sinist3r | gsm |
| 23:45.03 | Strom_C | what kind of phone are you using, and which codec is that leg of the call using? |
| 23:45.36 | Sinist3r | I'm using basic headphones and mic |
| 23:45.39 | Sinist3r | they hear me fine |
| 23:45.51 | Strom_C | so you're using a softphone |
| 23:45.57 | Sinist3r | but it's the incoming part thats the problem |
| 23:45.59 | Strom_C | what codec is the softphone using to talk to asterisk |
| 23:45.59 | Sinist3r | ya |
| 23:46.03 | Sinist3r | oh |
| 23:46.04 | Sinist3r | umm |
| 23:46.05 | Sinist3r | one sec |
| 23:46.29 | Sinist3r | says "Use Default SpeeX settings" |
| 23:46.35 | Strom_C | ugh |
| 23:46.42 | Strom_C | turn off speex, and try g.711 or ulaw |
| 23:46.43 | Sinist3r | bad? |
| 23:47.02 | Strom_C | if that fails to solve the problem, then try ulaw on the trunk portion of your connection |
| 23:47.16 | Sinist3r | k |
| 23:47.19 | Sinist3r | lets see |
| 23:47.22 | Sinist3r | wanna call? |
| 23:47.25 | Sinist3r | to test it |
| 23:48.30 | Strom_C | sure |
| 23:48.33 | Qwell_ | hey Strom_C ...silly question |
| 23:48.35 | Strom_C | give me a phone number |
| 23:48.39 | Strom_C | Qwell_: silly answer |
| 23:48.59 | TrentCreek | 555-1234 |
| 23:49.09 | Strom_C | that's 555-2368 |
| 23:49.21 | Qwell_ | If I call somebody (party B), then transfer them to somebody else (party C), does party B get any indication, assuming they're on a PRI/SS7 link or something? |
| 23:50.25 | WilliamK | Qwell, that's very interesting that you bring that up |
| 23:50.34 | WilliamK | it's something that's done almost in everyday life |
| 23:50.47 | *** join/#asterisk PepOSX (n=pepOSX@190.72.151.242) |
| 23:51.03 | Strom_C | Qwell_: so...let me break this down |
| 23:51.42 | WilliamK | and when I've done that on other systems (example Meridians, etc.) I've never noticed any alerting to party B |
| 23:53.51 | Strom_C | ok, off the phone |
| 23:54.10 | Strom_C | yeah, i dont know if you can send ALERTING after you send CONNECT |
| 23:57.58 | *** join/#asterisk jedaustin (n=chatzill@wsip-66-210-241-251.ph.ph.cox.net) |
| 23:59.08 | drwelby | Any ideas on why a Cisco 7940 would use the wrong context when dialing out? |
| 23:59.10 | drwelby | http://www.pastebin.ca/729442 |
| 23:59.20 | drwelby | My 7905s work fine |