| 00:00.08 | [TK]D-Fender | truent: Care to be a little more specific? |
| 00:00.26 | truent | i dont understand how you mean, its a sip connection.. phone is analog through an ata |
| 00:00.41 | *** join/#asterisk mvanbaak_ (n=michiel@asterisk/contributor-and-bug-marshal/mvanbaak) |
| 00:00.42 | [TK]D-Fender | trwhat DEVICE <- |
| 00:01.17 | knarfly | goes to comfort my long-tan-legged Brazilian GF....bbl |
| 00:01.23 | truent | spa2102 |
| 00:01.28 | TJNII | knarfly: Huh. I guess they never got to stage 2 on my system because I don't use 3 digit extensions. |
| 00:01.48 | [TK]D-Fender | truent: You shouldn't be using "tT" for transfers on those. Use the SPA's native transfer capability |
| 00:01.59 | knarfly | TJNII, they were using 3 and then 4 digits on mine |
| 00:02.13 | TJNII | Punks myst be getting smarter.... |
| 00:02.29 | truent | [TK]D-Fender, never looked into that, but i will now |
| 00:02.30 | truent | thanks |
| 00:02.30 | knarfly | I set the firewall to block anymore attempts from these IP's but that only if they try to get in again from the same IP |
| 00:03.35 | [TK]D-Fender | knarfly: You could always set up a log scanner to auto-ban IP's that attempt hacking this way. |
| 00:03.53 | TJNII | That's not a bad idea..... |
| 00:04.09 | knarfly | Punks is right...honestly why they choose to waste their talents on intrusions is beyond me....because right now I'm going to go and use all my talents with this long-legged woman.! see use guys later...! |
| 00:04.12 | *** join/#asterisk Loadrunner (n=Loadrunn@82-170-131-68.ip.telfort.nl) |
| 00:04.47 | *** part/#asterisk Loadrunner (n=Loadrunn@82-170-131-68.ip.telfort.nl) |
| 00:06.14 | *** join/#asterisk Loadrunner (n=Loadrunn@82-170-131-68.ip.telfort.nl) |
| 00:09.34 | *** join/#asterisk [hC] (n=hardcore@S01060016b6b53c0c.vc.shawcable.net) |
| 00:11.12 | irieKEN | Anyone know offhand if Asterisk can be told to use a different codec when making calls than when receiving calls? |
| 00:13.16 | bradleyprice86 | I am trying to install a fresh copy of asterisk on my server. I am using a T1 (Digium TE205P) card and when I try to run pri show span 2 is shows it as being down. I have made sure my settings were correct in zaptel.conf, not sure what else to do. Anyone got any suggestions? |
| 00:14.11 | irieKEN | bradleyprice86: Does "down" simply mean that the line is on-hook? |
| 00:15.39 | bradleyprice86 | Hmm..Odd. I just checked it again after it being down for an hour and now it's up. |
| 00:15.51 | irieKEN | bradleyprice86: weird. |
| 00:16.18 | bradleyprice86 | I definitely have more questions though. I am trying to understand exactly how to setup asterisk so I can call out through the T1 card. |
| 00:16.36 | TJNII | irieKEN: Why do you want different codecs, what device are you talking to, and what technology are you using? |
| 00:16.51 | WimpMan | bradleyprice86: Is it external? Then it might have been taken down by the switch because of line code violations during the upgrade. |
| 00:17.07 | bradleyprice86 | Nope. It's internal. |
| 00:17.49 | bradleyprice86 | Now it just went down. |
| 00:18.26 | bradleyprice86 | What does the Switchtype refer to? |
| 00:18.31 | irieKEN | TJNII: The only common codecs between our hardphones and the major trunking services are G711 and G729. I'd like to use G729 as much as possible, but I can't buy licensing for the Blackfin Asterisk platform that I am running. So, I want outbound calls to be passthrough G.729, and incoming to be G.711. |
| 00:18.56 | WimpMan | bradleyprice86: D-Channel protocoll. |
| 00:20.19 | TJNII | irieKEN: And allowing G729 and then G711 doesn't fall to G711 when * realizes it can't talk G729 on incoming? |
| 00:20.45 | bradleyprice86 | http://pastebin.com/m496c9471 -- take a look at this, it's my old zapata.conf file. I can't understand why there would be so many switchtype definitions in there. |
| 00:21.48 | irieKEN | TJNII: I'm not sure. I won't be able to try it until Tuesday when the office is open again; so I am asking around now:) I don't think that a SIP session can change codecs mid-stream. |
| 00:22.22 | WimpMan | bradleyprice86: 2=many? You seem to use two different protocolls on the two ports. But then you should know better. |
| 00:23.15 | TJNII | irieKEN: The only other idea I have is insted of one type=friend for your provider in sip.conf have one type=peer and one type=user with the allow/disallow set appropriately for each. I've never done that for SIP, but it is sonething to look into. |
| 00:23.25 | *** join/#asterisk rwaite (n=richard@d118-75-32-112.clv.wideopenwest.com) |
| 00:23.46 | irieKEN | TJNII: Ok, I will look into that:) |
| 00:24.20 | bradleyprice86 | My span 2 is showing up as switchtype qsig. Is that right? |
| 00:24.30 | bradleyprice86 | I thought it would be national. |
| 00:25.01 | WimpMan | bradleyprice86: So do I. qsig should be on the first port. |
| 00:26.01 | WimpMan | bradleyprice86: Mustn't the switchtype/signalling be _after_ the group parameter? |
| 00:27.05 | WimpMan | So, yes. port 1 would be national by group parameter and port 2 qsig by global parameter. |
| 00:27.16 | TJNII | Well, it is Saturday night and, seeing I just quit a job I could no longer stand, I'm going to get hammered. |
| 00:27.30 | TJNII | goes out for the night |
| 00:28.27 | bradleyprice86 | As you can tell I do not know much about Asterisk. But, let me explain what I have setup. I have a an old NEC PBX coming into the system on the system, (That is how our incoming calls are recieved, and we call out over the T1 which should be the second group. |
| 00:29.54 | WimpMan | bradleyprice86: And the NEC talks qsig? Well, yes, then the signalling protocolls seem to be the wrong way round. |
| 00:30.14 | rasterix | < braves himself for another night of insults |
| 00:30.19 | rasterix | hello people |
| 00:31.01 | *** join/#asterisk axisys (n=axisys@117.18.224.165) |
| 00:31.55 | jblack | omg. WWNO in new orleans is still playing jazz. |
| 00:32.19 | jblack | rasterix: That's up to you, as to whether you're going to be nice today, or mean. =) |
| 00:32.59 | jblack | your obnoxious start doesn't look promising. :( |
| 00:33.08 | bradleyprice86 | WimpMan: So I should be using national on my outgoing? |
| 00:33.26 | rasterix | jblack: sigh i tried to be nice |
| 00:33.48 | jblack | 'braves himself for another night of insults' is nice. |
| 00:34.10 | WimpMan | bradleyprice86: I can't tell you waht you need. Depends on one port on what your telco expects and on the other what your old pbx expects. |
| 00:34.12 | rasterix | oh thats just fear |
| 00:34.12 | jblack | here's some advice. /part the channel, rejoin it, and say "Hi! I hope everyone is having fun tonight" |
| 00:34.42 | jblack | be nice, start over fresh, and who knows. You might be happy |
| 00:34.51 | WimpMan | bradleyprice86: But if that pbx has been connected to that line before and you're trying to put * inbetween, they will certainly be both the same. |
| 00:34.54 | rasterix | oh i am happy |
| 00:34.58 | rasterix | and also |
| 00:35.03 | rasterix | despite wot u think |
| 00:35.10 | bradleyprice86 | Ok. |
| 00:35.17 | [hC] | rasterix: you misspelled "what" |
| 00:35.18 | rasterix | i have something (not much) to offer this channel |
| 00:35.38 | jblack | suit yourself |
| 00:35.42 | rasterix | hc: thats from too much time in low class chat rooms :) |
| 00:36.26 | jblack | Just figured implying everyone else present is an asshole probably wasn't the bet way to get going. |
| 00:36.35 | *** join/#asterisk Levonk (n=lk@adsl-75-62-129-71.dsl.lsan03.sbcglobal.net) |
| 00:36.55 | rasterix | oh jblack... u do that to every noob... just following ur lead |
| 00:38.58 | [hC] | rasterix: you misspelled "you" and "your" |
| 00:38.59 | [hC] | :) |
| 00:39.17 | rasterix | i have a syntax optimiser |
| 00:39.46 | [hC] | rasterix: You misspelled optimizer |
| 00:39.59 | jblack | He also forgot a period. |
| 00:39.59 | rasterix | hc: since im english |
| 00:40.01 | rasterix | i didnt |
| 00:40.14 | rasterix | understand cultural differences |
| 00:40.19 | rasterix | before you correct |
| 00:40.34 | jblack | Oh, "I" should be capitalized, and "didnt" is missing an apostrophe. |
| 00:40.53 | irieKEN | rasterix: You mistyped "didn't";) |
| 00:40.58 | jblack | [hC]: Is that the game? |
| 00:41.09 | [hC] | jblack: you got it :) |
| 00:41.24 | rasterix | its good that you guys are so keen on syntax |
| 00:41.31 | irieKEN | Hehe:) |
| 00:42.26 | jblack | OMG WTF D00D U R0K! |
| 00:42.34 | rasterix | <PROTECTED> |
| 00:42.46 | [hC] | rasterix: you misspelled "you" again. |
| 00:42.49 | jblack | omg. Is there a quote saver here? |
| 00:43.01 | rasterix | i hope so |
| 00:43.10 | jblack | jbot: rasterix is <[hC]> rasterix: You misspelled optimizer < learn english we invented it... u ruined it |
| 00:43.10 | jbot | jblack: okay |
| 00:43.48 | rasterix | im sorry |
| 00:43.55 | jblack | So, rasterix, you mentioned that you knew something interesting? |
| 00:44.01 | rasterix | yes |
| 00:44.25 | rasterix | four cheese has free delivery for the next month |
| 00:44.40 | jblack | wow. Thanks for the heads up. |
| 00:44.55 | rasterix | well i could say something else |
| 00:45.04 | rasterix | but basically jblack ur such a child |
| 00:45.16 | rasterix | whatever i say u will throw insults |
| 00:45.19 | jblack | I'm sorry. |
| 00:46.00 | *** join/#asterisk terracon (n=garry@CPE001cf097a750-CM0012254076d6.cpe.net.cable.rogers.com) |
| 00:46.15 | jblack | wait. when did I insult you? |
| 00:46.25 | rasterix | how do i send a private message |
| 00:46.30 | rasterix | like i said b4 |
| 00:46.36 | rasterix | i know nothing about irc |
| 00:47.18 | rasterix | jblack: to be honest im not sure... i get the impression u hate me |
| 00:47.45 | jblack | No. I don't even know you. I just don't like 1/2 of what you say, and dislike how you say everything. |
| 00:48.12 | rasterix | i dislike the way people attack new members of this channel |
| 00:48.25 | rasterix | not just me |
| 00:48.33 | rasterix | i watch others be insulted |
| 00:48.36 | rasterix | its pathetic |
| 00:48.37 | jblack | That happens sometimes. |
| 00:49.06 | jblack | It's not always deserved, too. Usually, but not always. |
| 00:49.10 | rasterix | my view of this room |
| 00:49.16 | rasterix | so far |
| 00:49.35 | rasterix | is that there is much knowledge |
| 00:49.50 | rasterix | but that most will leave |
| 00:50.03 | rasterix | before they get an answer |
| 00:50.06 | jblack | 240 people would care to disagree with you. |
| 00:50.19 | jblack | Including, apparently, you. |
| 00:50.28 | rasterix | jblack: because there are 240 members? |
| 00:50.39 | rasterix | please... |
| 00:50.40 | *** join/#asterisk terracon (n=garry@CPE001cf097a750-CM0012254076d6.cpe.net.cable.rogers.com) |
| 00:50.56 | rasterix | i had u down as one of the more inteligent people |
| 00:51.04 | rasterix | dont destroy that |
| 00:51.14 | jblack | Me? Bah. I barely know how to tie my own shoes. |
| 00:51.27 | rasterix | stfu |
| 00:51.29 | jblack | You're welcome to make a new channel, and show this one how it's done. |
| 00:51.33 | rasterix | usually i dont talk |
| 00:52.14 | rasterix | i watch |
| 00:52.14 | rasterix | i know for a fact |
| 00:52.14 | rasterix | u know ur shit |
| 00:52.20 | jblack | Find. YOu win. I was being modest. i do know how to tie my own shoes. I can even make double knots |
| 00:52.40 | rasterix | im sure |
| 00:52.49 | rasterix | there is no reason to hate me |
| 00:52.53 | rasterix | im not arrogant |
| 00:53.06 | jblack | true, as far as I've seen. |
| 00:53.17 | rasterix | i openly admit i know less about asterisk than most people in this room |
| 00:53.19 | [hC] | what the fuck. does anyone talk about asterisk in here anymore, or what. |
| 00:53.32 | jblack | [hC]: Got something * you care to discuss? |
| 00:53.39 | WimpMan | [hC]: Asterwhat? |
| 00:53.44 | rasterix | i do but... |
| 00:53.49 | jblack | god, no. Not another * fork. |
| 00:53.51 | rasterix | ill get ripped |
| 00:53.57 | rasterix | if i ask |
| 00:53.59 | jblack | Want to know why? |
| 00:54.21 | rasterix | no |
| 00:54.27 | rasterix | i want u to stop hating on me |
| 00:54.38 | rasterix | so i can relax in this channel |
| 00:54.49 | [hC] | rasterix: you could... not pay attention. |
| 00:54.59 | jblack | YOu're asking me, personally, to not "hate on" you? |
| 00:55.04 | rasterix | yes |
| 00:55.11 | rasterix | im asking u personally |
| 00:55.23 | jblack | I'm not the boss of anything, but I can do that. |
| 00:55.28 | jblack | Hi rasterix! How ya doing? |
| 00:55.36 | rasterix | hi jblack |
| 00:55.38 | rasterix | good |
| 00:55.50 | jblack | That's great to hear. How is asterisk coming along for you? |
| 00:55.54 | [hC] | rasterix: you are a whiner. |
| 00:56.02 | [hC] | See, now you fixed jblack, and you got a new hater. |
| 00:56.08 | rasterix | lol |
| 00:56.10 | rasterix | god |
| 00:56.29 | jblack | coughs up something nasty |
| 00:57.04 | rasterix | im writing a config file editor at the moment |
| 00:57.10 | jblack | [hC]: I laughed so hard, I think you dislodged something inside of me. |
| 00:57.23 | jblack | rasterix: A config file editor for asterisk? Neat! |
| 00:57.30 | rasterix | lol |
| 00:57.44 | rasterix | jblack: i do have something unique |
| 00:57.46 | jblack | Give it a nice web ui, and you can take trixbox on |
| 00:57.53 | rasterix | no |
| 00:57.59 | jblack | rasterix: I bet. We're all unique, in the same way. |
| 00:58.07 | rasterix | im making sure |
| 00:58.13 | jblack | Of? |
| 00:58.17 | rasterix | it gives u complete flexibility |
| 00:58.33 | jblack | an asterisk editor with complete flexibility? |
| 00:58.35 | rasterix | its just a text editor |
| 00:58.47 | rasterix | just slightly better than vim |
| 00:58.49 | jblack | Oh, you mean like vim? |
| 00:58.56 | rasterix | yes |
| 00:58.58 | jblack | You'er going to outdo vim ? |
| 00:59.04 | rasterix | yes |
| 00:59.29 | jblack | I wish you luck! |
| 00:59.37 | jblack | help.. doctor... |
| 00:59.39 | WimpMan | Looks like the time to fetch a bag of crisps and lean back... |
| 00:59.54 | [hC] | goes to get some wine |
| 01:00.01 | rasterix | jblack: haha im not planning on competing with vim as an editor |
| 01:00.34 | rasterix | just gonna give some intellisence etc |
| 01:00.47 | rasterix | intellisense* |
| 01:00.49 | rasterix | :( |
| 01:01.01 | rasterix | dont rape me for one typo |
| 01:02.37 | WimpMan | rasterix: So are you going to tell us what the killer feature is? |
| 01:02.49 | rasterix | wimpman |
| 01:02.56 | *** join/#asterisk Levonk (n=lk@adsl-76-237-12-155.dsl.lsan03.sbcglobal.net) |
| 01:03.01 | rasterix | wimpman: its not a killer feature |
| 01:03.06 | rasterix | its still alpha |
| 01:03.22 | WimpMan | Well the must be a reason, you're doing it. |
| 01:03.40 | jblack | ok. I'm back. I feel like I can breathe now. |
| 01:03.47 | rasterix | because i cant type |
| 01:04.02 | jblack | so, you're gonna make an editor, better tham vim, with intelligence, that's not going to compete with vim, right/ |
| 01:04.18 | WimpMan | rasterix: So it's about syntaxcheck or what? |
| 01:04.25 | rasterix | it has a windows interface |
| 01:04.32 | jblack | for windows. |
| 01:04.34 | WimpMan | Ugh |
| 01:04.36 | rasterix | vim users wont be interested |
| 01:04.45 | rasterix | they will take one look |
| 01:04.49 | rasterix | and move on |
| 01:04.54 | jblack | I use windows sometimes, and I use vim on it. |
| 01:04.55 | rasterix | asterisk beginners |
| 01:05.03 | rasterix | might like it |
| 01:05.18 | rasterix | anyway |
| 01:05.22 | rasterix | i started now |
| 01:05.26 | jblack | I'm confused. What's the relationship between asterisk and this new killer editor? |
| 01:05.27 | rasterix | so imma finish it |
| 01:05.40 | rasterix | jblack: sorry |
| 01:05.47 | rasterix | its an asterisk editor |
| 01:06.05 | rasterix | it has intellisense for asterisk apps and functions |
| 01:06.14 | jblack | What's intellisense? |
| 01:06.17 | rasterix | its not working so great right now |
| 01:06.39 | WimpMan | rasterix: Can't you just describe what it's suppoed to do? |
| 01:06.43 | rasterix | ermm when u type the bracket after dial it tells u the parameters |
| 01:06.57 | *** join/#asterisk dignome (n=kvirc@adsl-76-195-131-121.dsl.crchtx.sbcglobal.net) |
| 01:07.01 | rasterix | when u type the first , it tells u the second |
| 01:07.02 | rasterix | etc |
| 01:07.03 | jblack | so, completion hinting |
| 01:07.04 | [hC] | rasterix: you know you can build those sorts of "plugins" into existing editors, right? |
| 01:07.14 | rasterix | yes hC |
| 01:07.25 | WimpMan | Ok, so it's like some language mode for $ourfavouriteeditor, just as a windows app? |
| 01:07.42 | WimpMan | your... |
| 01:07.48 | rasterix | kind of |
| 01:07.58 | WimpMan | needs to learn typing again :-( |
| 01:08.00 | *** part/#asterisk dignome (n=kvirc@adsl-76-195-131-121.dsl.crchtx.sbcglobal.net) |
| 01:08.06 | jblack | There's another thin that confuses me. You're working on an editor for one platform, to configure software that works on another platform? |
| 01:08.18 | rasterix | yes jblack |
| 01:08.29 | rasterix | i think of asterisk as a "box" |
| 01:08.43 | jblack | I'm trying really hard to be nice. |
| 01:08.49 | rasterix | no |
| 01:08.53 | rasterix | i dont mind this |
| 01:08.57 | rasterix | say what u think |
| 01:09.05 | rasterix | i dont like personal insults |
| 01:09.07 | jblack | You're asking me to say what I think? |
| 01:09.10 | WimpMan | Wouldn't it make more sense to do it for an existing editor that runs on both platforms, like eg vim? |
| 01:09.24 | rasterix | does vim have intelisense? |
| 01:09.31 | [hC] | rasterix: your idea sounds like a waste of your time. just write the language mode syntax for another editor that already exists. |
| 01:09.44 | jblack | Ok, saying what I think, while trying to be nice, leaves me with "misguided" at best. |
| 01:09.52 | rasterix | ok |
| 01:09.55 | rasterix | but |
| 01:10.00 | rasterix | i ask again |
| 01:10.07 | rasterix | does vim have intelisense |
| 01:10.16 | rasterix | this editor is NOT for u guys |
| 01:10.21 | rasterix | i know u wont like it |
| 01:10.25 | WimpMan | define intellisense |
| 01:10.29 | rasterix | some vb programmers might |
| 01:10.42 | jblack | But it's people like "you guys" that configure asterisk, not vb programmers. |
| 01:10.54 | WimpMan | Don't you think they prefer the webfrontends? |
| 01:11.01 | rasterix | they might do |
| 01:11.05 | rasterix | its a choice |
| 01:11.11 | rasterix | something between the two |
| 01:11.27 | [hC] | waste of time. |
| 01:11.28 | [hC] | ^ |
| 01:11.30 | jblack | i'm not sure if vim has hinting or not. |
| 01:11.43 | rasterix | i dont think it does |
| 01:12.00 | rasterix | but im not wanting a fight like i said |
| 01:12.07 | jblack | I mean, it can have anything, from the way it's designed, but I don't know that someone has set that up specifically. |
| 01:12.08 | rasterix | it might be misguided |
| 01:12.09 | [hC] | its called code completion |
| 01:12.11 | [hC] | not intellisense |
| 01:12.25 | WimpMan | is not a vim user, either. In fact I haven't fond an editor on the PC I like, at all. |
| 01:12.26 | rasterix | hc thats not correct |
| 01:12.27 | [hC] | textmate for osx does it. |
| 01:12.41 | heedly | Ctrl+P does it in vim. |
| 01:12.47 | jblack | Ok. vim 7 has code completion |
| 01:12.54 | [hC] | rasterix: that is exactly correct. you want it to suggest what options can come next. |
| 01:12.59 | heedly | the only thing vim doesn't have is suck. |
| 01:13.26 | rasterix | like i said |
| 01:13.33 | rasterix | some "windows" users |
| 01:13.54 | rasterix | will like an easy windows interface to edit their config files |
| 01:13.54 | heedly | vim runs on windows. |
| 01:14.01 | heedly | and it's easy... |
| 01:14.14 | heedly | and it edits config files! |
| 01:14.17 | rasterix | they dont want to press escape |
| 01:14.23 | rasterix | to enter command mode |
| 01:14.29 | heedly | you can change it to another key. |
| 01:14.30 | WimpMan | rasterix: Are you planning to do all config files? |
| 01:14.38 | rasterix | wimpman: yes |
| 01:15.15 | jblack | tries to take [hc]'s "crisps" |
| 01:15.16 | rasterix | but i think ill just give up |
| 01:15.37 | rasterix | i dont think its such a bad idea |
| 01:15.42 | [hC] | rasterix: you realize that the people you are talking about who want nothing to do with learning about any sort of advanced editing are probably the same people who refuse to edit asterisk config files, right? |
| 01:15.51 | jblack | rasterix: Here's something I learned the hard way a long while ago. Sometimes, when something doesn't exist, it's for good reasons. |
| 01:16.08 | WimpMan | rasterix: I think something more interesting would be if you'd chek if it all makes sense. |
| 01:16.25 | rasterix | guys |
| 01:16.31 | rasterix | its not a big deal |
| 01:16.31 | jblack | rasterix: Something much nicer would be a linter. |
| 01:16.38 | rasterix | its just another text editor |
| 01:16.46 | rasterix | it will appeal to some people |
| 01:16.51 | rasterix | its not a world changer |
| 01:16.56 | jblack | Something that would go through * config files, point out things that are probably not right, or could be done more simply. |
| 01:17.16 | rasterix | omg |
| 01:17.33 | rasterix | jblack: i have an editor window |
| 01:17.34 | jblack | That would be of great use to the channel. we could tell users "please run astlint, please" |
| 01:17.37 | WimpMan | Yes, taht sounds like a usefull thing. |
| 01:17.38 | rasterix | and underneath |
| 01:17.42 | rasterix | an error window |
| 01:17.53 | WimpMan | Might save people from a lot of headaches. |
| 01:18.03 | rasterix | that so far only shows the line number of duplicate extension, priorities |
| 01:18.09 | rasterix | but my idea is |
| 01:18.14 | rasterix | to show all errors |
| 01:18.17 | jblack | yeah. catch registers in the wrong place, duplicate extensions, extensions that are unreachable, etc etc. |
| 01:18.23 | rasterix | omg |
| 01:18.26 | jblack | duplicate priorities. |
| 01:18.33 | rasterix | jblack: can we finally agree on something |
| 01:18.35 | jblack | we could really use that. |
| 01:18.56 | WimpMan | Extensions not starting with 1 or discontingous priorities. |
| 01:19.05 | jblack | I dunno. Do you also think that a zombie attack is an inevitable, and should be prepared against |
| 01:19.15 | rasterix | yes |
| 01:19.20 | rasterix | :P |
| 01:19.24 | jblack | Then yes, we agree on something. |
| 01:19.31 | [hC] | I cant take it anymore. I have to go look at something else. you guys are killing me. |
| 01:20.18 | rasterix | the error checking is one thing i thought about |
| 01:20.19 | hatoon | |
| 01:20.20 | hatoon | No asterisk can make a connection to a mobile phone.? |
| 01:20.30 | rasterix | but the main point of this editor |
| 01:20.42 | rasterix | is to give the syntax to noobs |
| 01:20.55 | jblack | hatoon: Indirectly, by dialing it's number. |
| 01:21.16 | jblack | rasterix: Seriously, a linter that looked up all the shit that we answer 50 times a day, that's on page 43 of the book, that would be of great use. |
| 01:21.46 | rasterix | rasterix: not the market i was thinking of |
| 01:21.49 | rasterix | but yes |
| 01:21.53 | rasterix | u r right |
| 01:22.04 | rasterix | why am i talking to myself? |
| 01:22.13 | rasterix | jblack:* |
| 01:22.15 | hatoon | as well? jblack |
| 01:22.15 | jblack | Because.. |
| 01:22.27 | rasterix | lol dont be mean jblack |
| 01:22.39 | jblack | I'm trying _really_ hard to be nice to you. |
| 01:22.39 | rasterix | i admit i walked into that one |
| 01:22.57 | jblack | hatoon: Pardon? |
| 01:23.14 | hatoon | ok |
| 01:23.28 | jblack | hatoon: To get asterisk to talk directly to cell phones, you'd need cell phone towers. Can I assume you don't have your own cellular network? |
| 01:24.14 | rasterix | jblack: im trying really hard not to fall out with you irreversibly |
| 01:24.17 | WimpMan | jblack: Would >1 wlan ap qualify? |
| 01:24.20 | WimpMan | scnr |
| 01:24.30 | jblack | kicks wimpman in his wimpy balls. |
| 01:24.52 | jblack | hatoon: Your cell phone has a provider, undoubtedly, and thusly has a phone number. |
| 01:25.01 | WimpMan | was just asking... |
| 01:25.04 | jblack | You can set * up to call that cell phone number as if it's any other extension. |
| 01:25.15 | jblack | WimpMan: Oh, I thought you were being sarcastic. Sorry. |
| 01:25.30 | WimpMan | Me? Never. |
| 01:25.39 | jblack | No, that wouldn't count for a cell phone, though it can for certain kinds of phones that support 802.11 (which do exist) |
| 01:25.49 | jblack | Polycom sells those, in fact. |
| 01:25.55 | hatoon | yeah |
| 01:26.23 | jblack | Are you talking about those? 802.11 IP phones, or cell phones? |
| 01:26.25 | WimpMan | jblack: I do have three such phones in use. And if I have >1 AP my network is cellular, isn't it? |
| 01:26.33 | rasterix | well im going to bed |
| 01:26.40 | rasterix | bye all |
| 01:26.50 | jblack | WimpMan: I wouldn't consider that a cellular network. |
| 01:26.59 | hatoon | you do not talk in pvt? jblack |
| 01:27.15 | WimpMan | Now we're getting to the main problem here. People asking half (or less) questions and everybody has to guess. |
| 01:27.18 | jblack | hatoon: I only accept private messages from paying clients. |
| 01:27.59 | jblack | wimpman: No way that could exist! |
| 01:28.08 | rasterix | lol so u wont be accepting them from me anytime soon jblack? |
| 01:28.39 | jblack | nope. You can msg me all day if it help you blow off steam. I won't see 'em. |
| 01:29.05 | rasterix | i have this thing called "icechat" |
| 01:29.13 | rasterix | i dont even see how to pm |
| 01:29.18 | jblack | ice..ice..chatty.... |
| 01:29.27 | rasterix | yeah |
| 01:29.28 | WimpMan | LOL |
| 01:29.34 | hatoon | you have company, or voip thing is? jblack |
| 01:29.40 | rasterix | i know its prolly shit |
| 01:29.53 | jblack | hatoon: have you ever configured asterisk before? you seem new to me. |
| 01:30.24 | jblack | don't bother answering. I know the answer already. |
| 01:30.26 | jblack | ~book |
| 01:30.27 | jbot | Asterisk: The Future of Telephony 2nd Edition (ISBN 0-596-51048-9) --- Order yours at http://www.oreilly.com/catalog/9780596510480/ --- Free downloadable PDF http://downloads.oreilly.com/books/9780596510480.pdf --- HTML at http://tfot.leifmadsen.com, or see ~buybook |
| 01:30.39 | jblack | here's what I want you to do, hatoon. see the pdf in the line from jbot? |
| 01:31.17 | *** join/#asterisk moy (n=moy@CPE000d9d59afef-CM00140454d33e.cpe.net.cable.rogers.com) |
| 01:31.20 | jblack | I want you to download it. spend a few hours flipping through the PDF, getting general overview of what asterisk is, and what it does, and some hint as to how it is configured and acts. |
| 01:31.32 | hatoon | I have servers running only voip I have now for mobile phones |
| 01:31.40 | jblack | then, come back, and say 'ok. I have these things, and I want those things'. |
| 01:32.01 | jblack | We'll be able to give you better advice then, because you'll be better able to understand the answers. |
| 01:32.28 | RypPn | sounds like he wants chan_mobile help |
| 01:32.31 | jblack | Right now, if I send you off to voipstreet or diamondcard, you'll blow $20 or $30 on something you won't know how to use. |
| 01:32.51 | WimpMan | Being able to ask the right question is usually much more helpfull. |
| 01:32.52 | jblack | I'd rather you understand how to use it first, _then_ spend the money. get me? |
| 01:33.22 | jblack | rasterix: ping. |
| 01:33.46 | WimpMan | . o O ( Having said that, it didn't seem to help me ... ) |
| 01:33.50 | hatoon | I do not know why you have this philosophy to speak with customers in pvt only here because I can not speak better with you. |
| 01:33.54 | hatoon | jblack, |
| 01:34.43 | jblack | hatoon: Because I don't like having 50 conversations going on at once. |
| 01:35.07 | hatoon | could do great business? |
| 01:35.14 | jblack | pardon? |
| 01:35.57 | jblack | Sure. You want me to have a private conversation with ya? Pay me! |
| 01:36.34 | hatoon | how? 50 conversations did not understand. |
| 01:36.35 | jblack | Hell, if you're paying me enough, or fly down and talk to you in person. |
| 01:37.09 | jblack | hatoon: right now, I'm just in two channels. Usually, I'm in 10. And having 4 different people from each channel deciding they'd rather a private conversation drives jblack crazy. |
| 01:37.35 | jblack | someone help me please! |
| 01:38.13 | WimpMan | jblack: How much are tou prepared to pay? *eg* |
| 01:38.37 | jblack | For what? |
| 01:38.56 | WimpMan | help |
| 01:38.57 | hatoon | good bye, thanks for what has already spoken, helped considerably. |
| 01:39.05 | WimpMan | BTW: Ob what? :-) |
| 01:39.08 | jblack | hatoon: We can talk here, of course. |
| 01:39.20 | jblack | WimpMan: How much am I prepared to pay myself for help? |
| 01:39.45 | *** join/#asterisk imcdona (i=imcdona@c-24-19-84-150.hsd1.wa.comcast.net) |
| 01:39.51 | WimpMan | When you can help yourself, why do you ask for help? |
| 01:40.04 | jblack | I honestly don't understand your question. |
| 01:40.08 | WimpMan | Anyway. This is getting too silly. |
| 01:40.16 | jblack | Did you mean how much am I willing to get paid? |
| 01:40.29 | WimpMan | <jblack>Â someone help me please! |
| 01:40.34 | WimpMan | that one. |
| 01:40.41 | jblack | Oh. How much am I willing to pay _you_ for help. |
| 01:40.51 | jblack | he's gone now. |
| 01:44.15 | jblack | has anybody seen a stock ticker agi? |
| 01:44.34 | *** join/#asterisk t0ny-p40 (n=t0ny-p40@67.61.114.85) |
| 01:45.09 | t0ny-p40 | I put a extension under [default] in extensions.conf and I still get this [Aug 30 19:44:10] NOTICE[27533]: chan_sip.c:13865 handle_request_invite: Call from 'tony' to extension '1234' rejected because extension not found. |
| 01:45.27 | jblack | t0ny-p40: Did you tell asterisk to reload the extensions.conf ? |
| 01:45.55 | jblack | If so, set verbose and debug up a bit, and trace the call. Make sure you are in the context you think you are. |
| 01:46.31 | t0ny-p40 | yes |
| 01:46.32 | jblack | (asterisk -r, set debug 9, set verbose 9, then watch the call happen) |
| 01:46.46 | WimpMan | t0ny-p40: Do you have a context specified for that user or globally and is it "default"? |
| 01:47.32 | jblack | If you feel hopelessly lost, you can paste your extensions.conf, your sip.conf & iax.conf (with passwords changed to XXXX) and a log of a call attempt at pastebin.com |
| 01:47.43 | jblack | But when you do so, do the entire files. DOn't hide stuff from me |
| 01:48.02 | t0ny-p40 | I changed the context to default and no change. |
| 01:48.20 | WimpMan | Did a sip reload? |
| 01:48.28 | *** join/#asterisk ack_syn (n=ack_syn@unaffiliated/ackz0r) |
| 01:48.28 | t0ny-p40 | just did a plan reload |
| 01:48.33 | t0ny-p40 | plain* |
| 01:48.37 | WimpMan | ok |
| 01:49.18 | t0ny-p40 | whats the number for the demo? |
| 01:52.20 | t0ny-p40 | http://pastebin.com/m58737109 there is my part of the sip.conf |
| 01:52.21 | jblack | bleh. the guy on the weather channel is a doofus. |
| 01:52.52 | jblack | t0ny-p40: I was very clear and speicfic on what we needed. Why did you not follow clear instructions? |
| 01:52.59 | jblack | I honestly want to know. |
| 01:53.16 | hatoon | but you are right and just that? |
| 01:53.19 | t0ny-p40 | no working on the other stuff |
| 01:53.20 | hatoon | jblack, |
| 01:54.03 | t0ny-p40 | the extensions.conf and iax are in their default state now. |
| 01:54.07 | jblack | hatoon: We need them, because he's not in the context he thinks he is. So, to figure out what's going on, we need to trace the logic path for his various gotos and macros. For that, we need all the logic, just one small snipit. |
| 01:54.17 | *** join/#asterisk Levonk (n=lk@adsl-76-238-251-85.dsl.lsan03.sbcglobal.net) |
| 01:54.46 | hatoon | what is their price, to install an asterisk remotely complete with phones and everything but? |
| 01:55.25 | jblack | hatoon: let's start over. What do you really want? |
| 01:55.48 | t0ny-p40 | I may just delete asterisk and compile it my self. I think ubuntu screwed something up. |
| 01:57.42 | jblack | hatoon: You want to hire someone to just do it all for you? |
| 01:58.10 | jblack | I'm happy to talk with you privately about that, but I, and most everyone else in the channel, is willing to help you do it here for free |
| 01:58.21 | hatoon | |
| 01:58.21 | hatoon | my knowledge in asterisk are median, so that had doubts about the rest cellular this right and that appears very large projects for me and I can put you in play. |
| 01:59.32 | *** join/#asterisk guax (n=guaxinim@unaffiliated/guaxinim) |
| 01:59.56 | t0ny-p40 | I got it working. I needed to change the context in gtalk.conf :) |
| 02:00.06 | bradleyprice86 | pri show span 1 -- is a valid command isn't it? |
| 02:00.42 | t0ny-p40 | Does any one know anything about cableone phone? I read that they use sip. |
| 02:01.13 | WimpMan | bradleyprice86: yes |
| 02:01.58 | jblack | hatoon: brazil, hmm? You guys don't have very reliable internet down there. |
| 02:02.11 | bradleyprice86 | WimpMan: I thought that is what I was just using. I just typed it in only to get a 'No such command "pri show"' from asterisk |
| 02:03.46 | WimpMan | bradleyprice86: Sounds like you're missing the whole channeldriver. That was a digium duo pri you have? |
| 02:04.00 | bradleyprice86 | Yes. |
| 02:04.08 | WimpMan | bradleyprice86: Check core show channeltypes. |
| 02:04.42 | WimpMan | If zap is missing the zaptel drivers aren't loaded propperly. |
| 02:05.20 | bradleyprice86 | Yep. It's not showing them at all |
| 02:05.34 | WimpMan | Err, none??? |
| 02:06.07 | bradleyprice86 | WimpMan: Misleading. I mean it's not showing Zaptel at all. |
| 02:06.15 | WimpMan | ok |
| 02:06.22 | bradleyprice86 | I made a change to the zapata.conf. That must have been what it was. |
| 02:06.37 | WimpMan | Ok, so it's a zaptel not an asterisk problem for now. |
| 02:06.58 | WimpMan | Yes, looks like it's not started. |
| 02:06.58 | jblack | bradleyprice86: There's no /proc/zaptel/1 ? |
| 02:07.07 | bradleyprice86 | jblack: No. |
| 02:07.18 | jblack | no, there's not, or no, I'm wrong? |
| 02:07.33 | jblack | feels silly for asking a bad question |
| 02:08.04 | bradleyprice86 | jblack: There is. |
| 02:08.25 | bradleyprice86 | jblack: Sorry, giving very unclear answers. |
| 02:08.49 | jblack | There is a /proc/zaptel/1 ? |
| 02:09.09 | jblack | It's not your fault. It's mine. |
| 02:09.28 | jblack | I know better than to ask two-part boolean questions |
| 02:09.30 | bradleyprice86 | http://pastebin.com/m3c5a274c -- I commented out the switchtype at the beginning and manually specified under group 1 and 2. That might be what the problem is. |
| 02:10.00 | bradleyprice86 | Oops. Now that I look at it. I didn't specify it on group 1. That could be a problem. |
| 02:10.32 | WimpMan | bradleyprice86: group 1 has no switchtype |
| 02:10.33 | jblack | Yeah. If you have /proc/zaptel/1, you have zaptel loaded for the kernel. If it's missing in *, then the group would definitely cause it to be a problem. |
| 02:11.06 | bradleyprice86 | Yes. I think I accidentally changed the signalling instead of adding switchtype for some reason. |
| 02:13.19 | jblack | syntatically, I think that's all you're missing. the only other difference I see from my zapata.conf is that I do not have blank lines between channels and group 1 |
| 02:13.56 | bradleyprice86 | Still can't make incoming or outgoing calls though. |
| 02:15.06 | WimpMan | Did you reload zaptel? Did it install correctely? does pri show spans work now? |
| 02:16.00 | bradleyprice86 | WimpMan: Yes. It works now. |
| 02:16.22 | WimpMan | And what I asked earlier: Are you trying to put asterisk in front of your old pbx that was connected directely to the T1 before? |
| 02:16.37 | WimpMan | Ok, right direction then. |
| 02:16.40 | bradleyprice86 | I am communicating with the NEC, or the NEC is communicating with me. This is the error I get when I call from my cell to the main number. |
| 02:16.43 | bradleyprice86 | http://pastebin.com/m428cba72 |
| 02:16.52 | bradleyprice86 | I think I do not have it routing right. |
| 02:18.06 | WimpMan | Ok, call comes in correctely. Now it's up to your dialplan. |
| 02:18.30 | WimpMan | Looks rather complicated. What is that all it's going through? |
| 02:18.32 | bradleyprice86 | Ah. What does the NoOP stand for? |
| 02:18.54 | WimpMan | No Operation i.e. only a comment. |
| 02:19.28 | bradleyprice86 | I am using a trixbox system (strictly companies idea) I wanted to go with a vanilla flavor. I think that is what's causing some of the problems. |
| 02:20.02 | bradleyprice86 | I don't fully understand the interface they use, since I am not use to using it. |
| 02:20.15 | WimpMan | Well I have no idea what the're trying to do in that dialplan atm. |
| 02:21.47 | bradleyprice86 | So, I guess it is trying to send the inbound call to extension 4001, which doesn't exist at the moment because I haven't set up all of the extensions. Our external calls come through the old PBX which is a NEC, incoming calls are all routed to extension 4001 which I believe is the receptionist. |
| 02:22.22 | WimpMan | Yes, I was going to guess that the extension is missing. |
| 02:23.04 | WimpMan | But I have no clue how to tell trixbox how to simply forward all extensions 1:1 to the other interface. |
| 02:23.17 | bradleyprice86 | It seems to make better since when I start from scratch and learn how all of the modules communicate and how everything works. |
| 02:24.05 | *** join/#asterisk dignome (n=dignome@216-82-199-27.dyn.grandenetworks.net) |
| 02:24.06 | WimpMan | I think you only need to get the dialplan right now. |
| 02:24.33 | bradleyprice86 | Hope so. |
| 02:24.39 | WimpMan | What is the intended purpose of the Asterisk the inbetween? |
| 02:25.54 | bradleyprice86 | Well. The only reason we still have the proprietary NEC is because they have custom software they have developed that communicates directly with it, and they are in the process of making it communicate with asterisk so that they can do away with the NEC. |
| 02:26.22 | WimpMan | ok |
| 02:26.31 | *** join/#asterisk Loadrunner (n=Loadrunn@82-170-131-68.ip.telfort.nl) |
| 02:26.34 | bradleyprice86 | Several Fax servers for incoming and outgoing. |
| 02:26.37 | WimpMan | So no fancy stuff going on there. |
| 02:27.44 | bradleyprice86 | Not really. |
| 02:27.58 | bradleyprice86 | They are wanting to develop a whole new system that completely runs on asterisk |
| 02:28.01 | WimpMan | Then your dialplan would be really simple. Make sure to get the two spans into two different contexts and forward the calls to the other interface. |
| 02:28.34 | WimpMan | For faxing? |
| 02:29.47 | bradleyprice86 | Yes. Later on. I am not working on that now. |
| 02:30.20 | WimpMan | I've never tried that, but from what i've read that might get interesting. |
| 02:30.47 | bradleyprice86 | Why? |
| 02:31.54 | dignome | Hi. I can't seem to get my pri to work (it is a single span t1 provisioned by telwest in the US). I receive the message "All circuits are busy" when dialing out from asterisk and for incoming calls I get a busy signal. I have a D110P from openvox: |
| 02:32.01 | dignome | http://pastebin.com/d547f5d9a - zaptel configuration |
| 02:32.10 | dignome | http://pastebin.com/m77e6f0b4 - asterisk side |
| 02:32.18 | WimpMan | Try to google for fax and asterisk, you should find some texts on the pitfalls. |
| 02:32.27 | *** join/#asterisk chased (n=themis@ppp089210108078.dsl.hol.gr) |
| 02:32.51 | WimpMan | Do we have full moon? |
| 02:32.56 | WimpMan | Only pri setup problems today. |
| 02:33.04 | bradleyprice86 | WimpMan: Funny |
| 02:35.36 | dignome | We have an old dash 3000 phone system that has analog lines tied into our providers verilink box which goes to a t1. Trying to dump the thing (10 years old and messing up). |
| 02:35.44 | jblack | um, either full moon, or new moon. |
| 02:35.58 | jblack | I don't know which, but my clock says it's one of 'em |
| 02:37.08 | WimpMan | Jup. 0% moon today. |
| 02:38.19 | jblack | I need to lean portuguese |
| 02:40.42 | jblack | what is up with brazil these days. Are they the new Japan? |
| 02:41.37 | ack_syn | jblack, why "new Japan" ? |
| 02:41.46 | bradleyprice86 | I hate Trixbox |
| 02:42.43 | jblack | As in a country that goes from not being a big player in commerce, to a critical one. |
| 02:42.49 | WimpMan | hates shiney admin tool. They are all different so (almost?) noone will be able to help you with them. |
| 02:43.56 | bradleyprice86 | WimpMan: If I install a vanilla asterisk system would freePbx work on top for our users to access recordings |
| 02:44.18 | *** part/#asterisk chased (n=themis@ppp089210108078.dsl.hol.gr) |
| 02:44.23 | ack_syn | Yes. Oil control the 'game'. And large reserves were found here. |
| 02:44.44 | ack_syn | So, we are being a big player, ehe |
| 02:45.03 | bradleyprice86 | for now |
| 02:45.05 | ack_syn | s/control/controls |
| 02:46.01 | jblack | here? |
| 02:46.19 | ack_syn | here->Brazil, ehe. |
| 02:46.37 | WimpMan | bradleyprice86: I have no idea, but what exactely is it you need for the users? |
| 02:46.43 | jblack | feel hoisted by his own petard. |
| 02:47.17 | jblack | Is there any sort of relationship between you and hatoon/ |
| 02:47.25 | ack_syn | but anyways, you dont need to learn porguese. You dont speak japanese :) English is our (IT) language, hehe |
| 02:47.35 | Alton2 | hah, I have certainly wondered that already, he has messaged me a million times since we conversed |
| 02:47.50 | ack_syn | jblack, nop |
| 02:48.12 | jblack | He and I are trying to talk. It's... interesting. |
| 02:48.28 | jblack | In a deaf leading the blind sort of way |
| 02:48.46 | bradleyprice86 | WimpMan: They record their conversations so that they can go back at the end of the day and get information as they need it to put into the system. |
| 02:48.52 | ack_syn | haha |
| 02:50.23 | WimpMan | bradleyprice86: Sorry, I don't know any frontends for such a thing. Never had the demand. |
| 02:51.27 | bradleyprice86 | WimpMan: Alright. Well, I think I am going to have to change and setup a vanilla asterisk system. This...trixbox isn't cutting it. |
| 02:52.36 | bradleyprice86 | I have approximately 100 users with probably an average of 15 to 20 concurrent users at a time. Do think I could probably get by with a core 2 duo with 1 of 2 gigs of ram? |
| 02:52.44 | bradleyprice86 | With it doing recordings as well? |
| 02:53.07 | l2trace99 | depends on the codecs |
| 02:53.19 | bradleyprice86 | I know the server we have now has no load at all on it, but it is more powerful. |
| 02:53.23 | jblack | Yeah, I think you could pull that off. |
| 02:53.25 | WimpMan | bradleyprice86: Maybe you could export the files via samba or something. As long as you get the permissions sorted. |
| 02:53.36 | bradleyprice86 | Ok. |
| 02:53.55 | jblack | Are you transcoding recordings yet? |
| 02:54.07 | l2trace99 | bradley I have about 60 users , in queues and I record all of them |
| 02:54.11 | WimpMan | bradleyprice86: As it's al plain vanilla G711 I wouldn't see any problems there. |
| 02:54.34 | Qwell | 20 concurrent calls would be no problem whatsoever, in almost any scenario |
| 02:54.36 | l2trace99 | bigest problem I have is disc IO |
| 02:54.47 | l2trace99 | and processor |
| 02:55.02 | l2trace99 | from the conversion of mp3 of moh |
| 02:55.04 | jblack | One of my clients likes recordings, so I set up seralized transcoding for them. |
| 02:55.11 | l2trace99 | for people waiting in the queues |
| 02:55.20 | bradleyprice86 | See. I was thinking if I could get another box up and running that I could work on while they were using the main phone system. I wouldn't be under the time restraints. Because now, I only have saturday night until sunday night to get a system completely working unless I want to spend several weeks. |
| 02:55.23 | jblack | The system tends to fall behind during the day, and catches up by morning. |
| 02:55.30 | l2trace99 | that is running trixbox BTW |
| 02:55.38 | bradleyprice86 | Our moh is a mp3 |
| 02:55.49 | jblack | Ok guys, i undersatnd what's going on with hatoon now. |
| 02:55.51 | bradleyprice86 | We do transcoding on our system currently I guess. |
| 02:55.56 | WimpMan | Well the line has only 1.5mbit/direction so that limits the recordings to 300KB/s. Should be easy to handle even with a slow disk. |
| 02:56.28 | jblack | Hatoon is starting up an online free software magazine. he wants to have an asterisk based focus. He's looking for help on content and such. |
| 02:56.52 | jblack | Oh, and by the way, it's in Brazil, so portuguese is a bonus. |
| 02:56.56 | Alton2 | Hmm, my impression was that he has a commercial product that he wants to add asterisk to and he wants someone to do it for free for him. |
| 02:57.17 | bradleyprice86 | jblack: what is serialized transcoding? |
| 02:57.30 | jblack | bradleyprice86: transcoding one recording at a time. |
| 02:58.56 | jblack | Rather than doing them on the fly, all at once, i set them up to transcode one at a time, in a fifo manner. |
| 03:00.31 | jblack | It's just a simple script that flocks and when it gets it's chance runs sox on the files. |
| 03:00.43 | bradleyprice86 | Oh. |
| 03:01.13 | jblack | Technically, it's not _really_ serialized, since multiple scripts are blocking, but it's effectively so. |
| 03:01.22 | *** join/#asterisk knarfly (n=knarfly@c-75-74-155-198.hsd1.fl.comcast.net) |
| 03:02.08 | jblack | ack_syn: You may want to talk to that guy. There might be $ in it for ya |
| 03:02.22 | knarfly | where can I find a good, reliable VOIP provider that supports * iax, DID's, etc... |
| 03:03.13 | *** join/#asterisk luxxx77 (n=luxxx77@e179204163.adsl.alicedsl.de) |
| 03:04.03 | *** join/#asterisk ether0 (n=ether0@adsl-065-007-192-183.sip.mia.bellsouth.net) |
| 03:05.05 | bradleyprice86 | If I were to install a vanilla system, what would my best bet be as far as a flavor of linux? |
| 03:05.13 | WimpMan | wonders why * is writing two seperate files wehn monitoring. Are the two directions of a call handled independently internally? |
| 03:05.29 | jblack | knarfly: I've had no problems with teliax, minor problems with callwithus. No problems with vopstreet and diamondcard, but both of them are new for me. |
| 03:05.47 | jblack | WimpMan: In and out. That way you can tell where the noise is. :) |
| 03:05.47 | WimpMan | bradleyprice86: Oh, no, don't start a flavour war :-) |
| 03:05.53 | Alton2 | I like slackware, but probably debian or centos. Thing is, you have to add all sorts of things to them, whereas asterisk compiles under slackware right away. |
| 03:06.02 | jblack | bradleyprice86: Chocolate. |
| 03:06.05 | bradleyprice86 | Lol. |
| 03:06.07 | jblack | No. Mint. |
| 03:06.14 | jblack | Ubuntu |
| 03:06.22 | bradleyprice86 | I was going to say Ubuntu, simply because I am use to it. |
| 03:06.28 | WimpMan | jblack: Yes, but it would be just as good an easier if it'd write a stereo file directely. |
| 03:07.11 | WimpMan | also prefers slackware. What are others missing? |
| 03:07.33 | Alton2 | They don't like typing ./configure; make; make install |
| 03:07.40 | Alton2 | and, to some extent, I can't blame them, |
| 03:08.04 | Alton2 | although debian is still installing the asterisk 1.2 package if I remember correctly; they are not known for being current with the software versions. |
| 03:08.18 | Alton2 | So you have to compile from source anyway! |
| 03:10.15 | *** join/#asterisk terracon (n=garry@CPE001cf097a750-CM0012254076d6.cpe.net.cable.rogers.com) |
| 03:11.12 | *** join/#asterisk [gquit]bombadil (n=dana@CPE-70-94-44-157.wi.res.rr.com) |
| 03:11.27 | *** join/#asterisk Bonix (n=Bonix@196-lo1.rt2.isimples.com.br) |
| 03:12.31 | *** join/#asterisk Bonix (n=Bonix@196-lo1.rt2.isimples.com.br) |
| 03:13.42 | *** join/#asterisk Levonk (n=lk@adsl-76-227-118-224.dsl.lsan03.sbcglobal.net) |
| 03:16.12 | *** join/#asterisk coppice (n=chatzill@177.162.17.210.dyn.pacific.net.hk) |
| 03:19.10 | *** join/#asterisk harryjr (n=harryjr@67-207-147-205.slicehost.net) |
| 03:34.06 | guax | Alton2: i dont see a problem, ./configure ./make ./make install (or makepkg, or checkinstall) |
| 03:36.02 | Alton2 | yup, it's pretty much the way things are done under linux |
| 03:40.40 | jameswf-home | or ./configure && make && make install |
| 03:40.52 | jameswf-home | no ./ on makes by the way |
| 03:41.08 | ack_syn | or more README ; more INSTALL |
| 03:41.25 | jameswf-home | or rm -rf ../ |
| 03:41.44 | guax | or turn the computer off and go to the beach |
| 03:42.00 | ack_syn | many packages you dont have a "configure" script or a Makefile .. |
| 03:42.11 | ack_syn | that's the point.. |
| 03:42.28 | coppice | I take a computer to the beach, but usually need a sun shade to see the screen properly |
| 03:42.34 | jameswf-home | um ls will let you know |
| 03:43.18 | jameswf-home | if [ -f "configure" ] then ./configure; fi |
| 03:43.42 | ack_syn | else? :( |
| 03:44.58 | jameswf-home | whats the point "asterisk" the "room topic" has a configure script and Makefile |
| 03:45.04 | WimpMan | sugests s/-f/-x/ |
| 03:45.16 | ack_syn | what about its deps? hehe :) |
| 03:45.29 | jameswf-home | if it -x and is not a file what good is that |
| 03:45.51 | *** join/#asterisk sah-work (n=Bawbatos@adsl-76-247-111-195.dsl.pltn13.sbcglobal.net) |
| 03:46.30 | WimpMan | It has to be a file. |
| 03:48.23 | guax | what about to know that you are compiling asterisk, and just type, "./configure" "make" and (optional) "make install" |
| 03:48.48 | jameswf-home | sory WimpMan thinking of -e not -x |
| 03:49.21 | Qwell | why would it be an irregular file? |
| 03:49.52 | jameswf-home | Qwell: not enough fiber |
| 03:50.29 | ack_syn | guax, why could 'make install' be optional? |
| 03:50.48 | jameswf-home | ack_syn: you can compile without installing |
| 03:51.04 | ack_syn | never did it :| |
| 03:51.19 | guax | ack_syn: you can generate a package for your distro, that is checkinstall for debian, or you can use make install DESTDIR=/some/place and generate a slackware package |
| 03:51.53 | *** join/#asterisk fakhir_ (n=fakhir@unaffiliated/fakhir) |
| 03:52.05 | ack_syn | oh, never needed |
| 03:52.25 | ack_syn | I usually use --prefix to set /my/place |
| 03:52.49 | guax | not aways the best option |
| 03:53.04 | guax | well, 1 am here, time to sleep |
| 03:54.17 | ack_syn | for me it's aways the best .. |
| 03:57.33 | *** join/#asterisk [gquit]bombadil (n=dana@CPE-70-94-44-157.wi.res.rr.com) |
| 04:06.30 | jblack | I'm tired of waiting for gutav to hit. |
| 04:09.27 | jameswf-home | thats what she said |
| 04:09.51 | *** join/#asterisk Levonk (n=lk@adsl-76-237-14-156.dsl.lsan03.sbcglobal.net) |
| 04:09.53 | Alton2 | some friends of our from new orleans came down to south texas to stay with my mother |
| 04:10.01 | x86 | jameswf-home: nice |
| 04:10.02 | Alton2 | might be some time before they leave! |
| 04:11.24 | jameswf-home | I may be insensitive but if you live in a place below sea level that is regularly hit by huricanes you sort of get what you get... I cant believe how much money is being spent to prevent another katrina.... dude easy enought to prevent MOVE |
| 04:11.59 | Alton2 | yeah, I quite agree, Dolly hit here and you don't see my asking for any money or complaining about the President supposedly not doing his job. |
| 04:12.13 | Alton2 | 12 feet under sea level. sheesh. |
| 04:12.54 | Alton2 | oughta let it become another lake, but get this disturbing statistic, |
| 04:12.57 | jameswf-home | any time you hear the word those levies were built by the governmet ( or any other structure) RUN |
| 04:13.10 | *** join/#asterisk newbie___ (n=Some_guy@60.49.23.190) |
| 04:13.21 | coppice | before moving to a place below sea level, ensure you are a mermaid |
| 04:13.22 | Alton2 | 3 years after Katrina, 250,000 fewer people in new orleans... and the number employed has gone up by 10,000! |
| 04:13.31 | Alton2 | Most of those deadbeats are in Houston, sad for Houston. |
| 04:13.37 | newbie___ | hi all, has anyone tried to connect to huawei softx3000 ? |
| 04:14.11 | jameswf-home | alot here in Arizona too |
| 04:15.10 | *** join/#asterisk fakhir (n=fakhir@unaffiliated/fakhir) |
| 04:15.23 | jameswf-home | newbie___: looks neat... no |
| 04:15.38 | newbie___ | hmmm |
| 04:15.44 | *** part/#asterisk bradleyprice86 (n=bradleyp@fw.datafax.net) |
| 04:16.47 | newbie___ | let me rephrase, what could be the cause if the remote sip answered and then hang up immediately ? any pointer> |
| 04:17.12 | jameswf-home | whats the CLI say |
| 04:17.14 | l2trace99 | incompat codec settings |
| 04:17.19 | jblack | perhaps a firewall. do a sip debug |
| 04:17.22 | l2trace99 | natting |
| 04:17.27 | jameswf-home | ~sip |
| 04:17.28 | jbot | hmm... sip is http://www.cs.columbia.edu/sip/ X11 PPP dialer interface written in gtk+. URL: http://www.geocities.com/SiliconValley/Campus/3104/sip/ Session Initiation Protocol (see RFC 3261) |
| 04:17.49 | newbie___ | SIP debug says 'normal clearing' |
| 04:18.13 | Alton2 | what is the remote sip? |
| 04:18.19 | WimpMan | 404 for the 2nd url |
| 04:18.30 | newbie___ | Huawei softx3000 |
| 04:18.31 | jameswf-home | set logger.conf to dump debug to the console then [core] set debug 99 |
| 04:18.52 | l2trace99 | i think jbot needs some updating |
| 04:19.00 | newbie___ | jameswf-home: i am still on 1.2 |
| 04:19.12 | jameswf-home | jbot: has alot of debian stuff... |
| 04:19.15 | Alton2 | yikes |
| 04:19.21 | WimpMan | Or an url validation feature? |
| 04:19.30 | jameswf-home | newbie___: this is why i say [core] not core |
| 04:19.44 | jameswf-home | ~debian |
| 04:19.45 | jbot | http://www.debian.org. See http://www.debian.org/doc/manuals/project-history/index.en.html#contents |
| 04:19.45 | Alton2 | Maybe say "upgrade" instead? |
| 04:20.21 | jameswf-home | I have a bot but he is kinda a jerk.... |
| 04:21.38 | ack_syn | what about gustav? :~ |
| 04:23.12 | jameswf-home | ~weather KHB |
| 04:23.30 | newbie___ | i looked at the log. i got "Didn't get a frame from channel" "Bridge stops bridging channels " and the calls hangup |
| 04:24.02 | jameswf-home | ~weather KNEW |
| 04:24.29 | l2trace99 | ~pancakes |
| 04:24.32 | jameswf-home | doesnt look like a hurricane to me |
| 04:24.35 | l2trace99 | i got nothing |
| 04:24.55 | *** join/#asterisk dignome (n=dignome@216-82-199-27.dyn.grandenetworks.net) |
| 04:24.58 | Alton2 | it won't be long |
| 04:25.27 | Alton2 | I remember a hurricane passing by not 50 miles north of here, we got sunshiny days and not a drop of rain, almost not even a wind out of the deal. |
| 04:25.51 | Alton2 | It wasn't a 4 though. :-) |
| 04:26.27 | coppice | we had great weather for the olympics last thursday night, and the next morning folks woke to a major typhoon |
| 04:29.06 | dignome | Hi. Still having trouble driving my t1 with asterisk/zaptel. pri show span 1 states "Status: Provisioned, Down, Active". Cable is plugged in and light is green... |
| 04:29.11 | dignome | http://pastebin.com/m77e6f0b4 - asterisk side |
| 04:29.20 | dignome | http://pastebin.com/d547f5d9a - zaptel configuration |
| 04:29.45 | ack_syn | hehe |
| 04:30.01 | jblack | where's your zapata.conf ? |
| 04:30.58 | dignome | http://pastebin.com/d547f5d9a line 46 |
| 04:31.31 | jblack | You should have a group line in your zapata.conf |
| 04:32.33 | jameswf-home | dignome: your sending out SABME but the otherside is not acknowledging... my guess is they have you turned down be sure you have your dchan right |
| 04:33.07 | dignome | ok. can it vary? i mean, it is a fractional t1 - we have a couple voice channels and the rest is data. |
| 04:33.14 | *** join/#asterisk sysreq (n=sysreq@unaffiliated/sysreq) |
| 04:33.17 | jameswf-home | dignome: are you using an RJ48 X over |
| 04:33.53 | dignome | probably not... it's whatever was plugged into our telco verilink box that connects to our old analog phone system. |
| 04:38.16 | t0ny-p40 | I setup gtalk but when I try to call some on with it I cant hear them and they hear nothing. Any ideas? |
| 04:38.42 | jameswf-home | ummmm #gtalk |
| 04:38.56 | t0ny-p40 | over asterisk |
| 04:39.40 | t0ny-p40 | http://www.voip-info.org/wiki/view/Asterisk+Speaks+with+Google+Talk |
| 04:40.21 | dignome | hmm. asterisk does not have the zap or pri commands available with anything other than bchan=1-23 dchan=24 |
| 04:40.27 | dignome | going to look at crossover cable now |
| 04:41.04 | WimpMan | dignome: Do you have an alarm on the interface? |
| 04:41.21 | WimpMan | If not the cable can't be wrong. |
| 04:41.50 | newbie___ | hi all, i got "Didn't get a frame from channel" "Bridge stops bridging channels " and the calls hangup , what does it mean ? |
| 04:41.52 | dignome | no alarm is present |
| 04:41.56 | dignome | says OK |
| 04:42.40 | WimpMan | dignome: The the two endpoints communicate in some way. |
| 04:43.26 | WimpMan | I didn;t read the start, but if the line protocoll is up, it must be higher up, i.e. signalling/switchtype. |
| 04:43.59 | dignome | ok. when i talked with the provider they said something about using niq protocol |
| 04:44.29 | dignome | or maybe it was ni2 for national isdn type 2 |
| 04:44.36 | WimpMan | Err, never heared before. |
| 04:44.40 | WimpMan | That makes sense. |
| 04:44.47 | dignome | i'll have to talk with them some more. thanks guys. |
| 04:45.31 | *** join/#asterisk irisht (n=irisht@cpe-70-122-11-142.austin.res.rr.com) |
| 04:46.56 | *** join/#asterisk CrazyTux[m] (n=CrazyTux@ip68-111-67-4.oc.oc.cox.net) |
| 04:47.04 | CrazyTux[m] | Hows it going guys. |
| 04:50.05 | *** join/#asterisk bijit (n=benji@200.122.188.156) |
| 04:56.31 | *** join/#asterisk VIPCarrier (n=vipcarri@ool-44c65236.dyn.optonline.net) |
| 04:56.34 | VIPCarrier | hello |
| 04:57.04 | CrazyTux[m] | VIPCarrier, hello. |
| 04:58.41 | VIPCarrier | how u guiz doing tonight |
| 04:58.45 | VIPCarrier | ready to make some cash? |
| 04:58.47 | jameswf-home | I think the US should admit they were wrong and go to E1 |
| 04:58.57 | VIPCarrier | what about E1? |
| 04:59.13 | VIPCarrier | screw T1 and E1 we are in 2008 lets move to DS3 ;) |
| 04:59.16 | VIPCarrier | brb |
| 05:00.16 | *** join/#asterisk VIPCarrier (n=vipcarri@ool-44c65236.dyn.optonline.net) |
| 05:00.21 | VIPCarrier | i'm back |
| 05:00.28 | VIPCarrier | so whats the deal here |
| 05:00.38 | WimpMan | VIPCarrier: Where is the cash? |
| 05:00.59 | WimpMan | VIPCarrier: tell us. You started. |
| 05:01.01 | VIPCarrier | yo ur clients whould give u some cash |
| 05:01.29 | VIPCarrier | in a garbage bags |
| 05:01.39 | VIPCarrier | thats how clients do in Brooklyn |
| 05:01.55 | WimpMan | Bagwise wouldn't be bad. |
| 05:02.24 | WimpMan | Here we only use envelopes. |
| 05:02.33 | VIPCarrier | any ways i need some one to help me with little programming |
| 05:02.39 | VIPCarrier | willing to pay cash ;-) |
| 05:03.12 | jameswf-home | likes cash.... how will you get it through the computer |
| 05:03.17 | WimpMan | Probbly more a question of possibillities. |
| 05:03.38 | WimpMan | That's exactely the question. |
| 05:03.43 | VIPCarrier | Western Union my friedn |
| 05:03.50 | jameswf-home | thats not cash |
| 05:03.55 | VIPCarrier | i'll sent a u pick up cash |
| 05:03.56 | VIPCarrier | :) |
| 05:03.58 | VIPCarrier | it is cash |
| 05:04.14 | VIPCarrier | any ways |
| 05:04.25 | VIPCarrier | I need a script to provision phones |
| 05:04.39 | VIPCarrier | Cisco, Polycom and Aastra |
| 05:04.42 | VIPCarrier | via tftp |
| 05:04.57 | *** join/#asterisk the_5th_wheel (n=edd@webster.cybertek.co.za) |
| 05:05.18 | jameswf-home | I hear trixbox does that steal there scripts |
| 05:05.33 | VIPCarrier | they sux |
| 05:05.40 | VIPCarrier | i dont like trixbox |
| 05:07.01 | jameswf-home | its free.. |
| 05:07.11 | jameswf-home | as in beer |
| 05:07.14 | VIPCarrier | free does not mean always good |
| 05:07.27 | VIPCarrier | i need it for hosted solution |
| 05:10.03 | *** join/#asterisk steliosk (n=Stelios@79.107.54.145) |
| 05:11.58 | VIPCarrier | any one? |
| 05:14.21 | *** join/#asterisk terracon (n=garry@CPE001cf097a750-CM0012254076d6.cpe.net.cable.rogers.com) |
| 05:14.29 | *** join/#asterisk Levonk (n=lk@76.237.13.117) |
| 05:18.54 | *** part/#asterisk POSmeister (n=Loadrunn@82-170-131-68.ip.telfort.nl) |
| 05:22.00 | t0ny-p40 | I'm setting up a friend a sip account on my server does he need to open any ports on his router? |
| 05:22.27 | *** join/#asterisk kamanashisroy (n=kamanash@119.30.34.10) |
| 05:22.44 | VIPCarrier | what phone he gonna use |
| 05:22.45 | VIPCarrier | ? |
| 05:23.10 | VIPCarrier | tell him to open up RDP ports |
| 05:23.18 | t0ny-p40 | x-lite |
| 05:23.30 | t0ny-p40 | what port is RDP? |
| 05:23.35 | VIPCarrier | sorry rtp |
| 05:23.37 | VIPCarrier | RTP: UDP ports 16384-32767 ... |
| 05:23.59 | VIPCarrier | not sure with x-lite |
| 05:24.24 | VIPCarrier | but thats what we always keep open for our hosted cleints |
| 05:24.38 | VIPCarrier | but they use Cisco and Polycom phones not a softphone's |
| 05:24.46 | *** part/#asterisk harryjr (n=harryjr@67-207-147-205.slicehost.net) |
| 05:25.26 | VIPCarrier | make sure that u select on ur end that he has a NAT |
| 05:26.35 | newbie___ | hi all, i got "Didn't get a frame from channel" & "Bridge stops bridging channels " and the calls hangup , what does it mean ? |
| 05:29.11 | [TK]D-Fender | t0ny-p40: No, he does not need any ports open |
| 05:29.16 | [TK]D-Fender | t0ny-p40: read the guide : |
| 05:29.18 | [TK]D-Fender | ~sipnat |
| 05:29.18 | jbot | [~sipnat] Quick guide on configuring * + SIP behind NAT : http://www.aocomputing.net/?p=3 , otherwise check the WIKI at http://www.voip-info.org/wiki/view/Asterisk+SIP+NAT+solutions |
| 05:29.20 | [TK]D-Fender | ^^^^^^^ |
| 05:30.39 | SplasPood | Has anyone here ever used res_config_curl ? |
| 05:32.34 | jameswf-home | didnt take off but this is funny http://voip-buzz.com/2007/02/13/worxbox-an-independent-trixbox/ |
| 05:32.52 | jblack | <PROTECTED> |
| 05:33.29 | jblack | "Do we stayyyyy..., do we go..... by the way, hit the atm and take some money out" |
| 05:34.28 | *** join/#asterisk bijit (n=benji@200.122.188.156) |
| 05:35.28 | VIPCarrier | why would u wanna have on ur phone server joomla... and zimbra!! zimbra takes a lot of ram... |
| 05:36.17 | jameswf-home | i dunno some people run X on their systems |
| 05:37.59 | VIPCarrier | i think PBX server must stay as PBX nothing extra |
| 05:38.08 | VIPCarrier | as soon u start ading crap to it it is over |
| 05:38.18 | VIPCarrier | forget about stability |
| 05:38.40 | *** join/#asterisk [hC] (n=hardcore@S01060016b6b53c0c.vc.shawcable.net) |
| 05:53.22 | rue_mohr | I can append to a variable by referencing itself in its new value, right? |
| 05:55.32 | florz | rue_mohr: not in the general case |
| 05:56.08 | florz | I don't know the exact rules, but if the Variable contains backslashes, at least, that doesn't work |
| 05:56.22 | rue_mohr | hmm |
| 05:56.36 | rue_mohr | I'm looking to 'build' a list of extensions to ring |
| 05:57.53 | *** join/#asterisk Genji1981 (n=w@203.152.122.50) |
| 05:59.49 | Genji1981 | okay... more results on asterisk-mini openwrt on a ASUS WL-HDD. Apparently, my voice is fine.. doesn't break up... but when i speak, the sound im getting from my voip company, breaks up slightly. can anything be done other than get a faster box? |
| 06:00.33 | rue_mohr | sure its not a datarate or delay problem in the middle? |
| 06:00.38 | Genji1981 | got bare minimum processes running. bare minimum modules loaded... its a native SIP to SIP connection. |
| 06:01.00 | jblack | make sure you're not transcoding. stick to just gsm, or just ulaw. |
| 06:01.03 | Genji1981 | and cpu doesn't max out... peaks at 70percent. |
| 06:01.10 | Genji1981 | and it is ulaw. |
| 06:01.21 | Genji1981 | SJphone says PCMU |
| 06:01.24 | jblack | across the board. |
| 06:01.28 | Genji1981 | yup. |
| 06:01.35 | jblack | Then that's it. |
| 06:01.47 | Genji1981 | native SIP though, so even the codec_ulaw.so is unloaded. |
| 06:01.51 | Genji1981 | and still works fine. |
| 06:02.24 | Genji1981 | so..... i think.. ya.. ive hit the limit i can do with my ASUS wl-hdd? |
| 06:02.29 | [TK]D-Fender | rue_mohr>I can append to a variable by referencing itself in its new value, right? <- yes |
| 06:02.40 | jblack | This is your experiment, not ours. About half a dozen people told you that you were wasting your time, you did it anyways, so don't waste our time. |
| 06:02.58 | rue_mohr | Im looking through the pdf now for a string append application? |
| 06:03.16 | [TK]D-Fender | rue_mohr: Set <- |
| 06:03.23 | Genji1981 | k. well... thanks for at least giving some tips, jblack. has helped to get this far. |
| 06:03.26 | florz | rue_mohr: AFAIK there is no way |
| 06:04.05 | rue_mohr | set (string=hello) |
| 06:04.21 | rue_mohr | set string = $string+"world" |
| 06:04.25 | rue_mohr | :) |
| 06:04.26 | rue_mohr | ?? |
| 06:04.31 | [TK]D-Fender | rue_mohr: .... |
| 06:04.33 | rue_mohr | (still reading) |
| 06:04.39 | jblack | welcome. |
| 06:04.50 | [TK]D-Fender | rue_mohr: Jesus if you don't know how to set a channel variable you're pretty much screwed |
| 06:05.05 | [TK]D-Fender | ~osmosis |
| 06:05.05 | jbot | [~osmosis] Osmosis is the act of beating yourself on the head repeatedly with THE BOOK, until some measure of absorption has occured ... or at least until your unconsciousness restores peace to the channel ... |
| 06:05.07 | [TK]D-Fender | ^^^ |
| 06:05.07 | rue_mohr | I dont know how to do a string append |
| 06:05.15 | jblack | tk: The day has been solidly broken into 3 groups. |
| 06:05.16 | rue_mohr | I'm reading, I'm reading |
| 06:05.27 | [TK]D-Fender | rue_mohr: put what you want on the right side of "=" |
| 06:05.54 | jblack | Zaptel problems, How do i scratch my own ass problems, and I want to do something silly problems. |
| 06:06.18 | rue_mohr | mine is obviously the fault of my zaptel card |
| 06:06.27 | jblack | even asterix came by. He's decided to make an editor for windows to edit * config files. With "Intellisense". |
| 06:06.54 | [TK]D-Fender | jblack: Will yippy-kai-yay &#$%&^$%&^#$ |
| 06:07.18 | Genji1981 | hmm... what... vim with syntax checking? |
| 06:07.33 | jblack | just letting you know that your clue stick may break tonight. |
| 06:07.55 | jblack | The only sensible thing I've seen today is manxpower is offline. Presumably he finally left new orleans. |
| 06:08.26 | [TK]D-Fender | jblack: He only works around there, doesn't live there IIRC |
| 06:09.29 | rue_mohr | ooo, I can use d to allow people to bypass the 40 rings I have before my phone goes to vm |
| 06:09.58 | Genji1981 | oooo! asterisk 1.4.1 has been compiled for openwrt..... ive been using 1.2..... is there much of performance increase between those two versions? |
| 06:10.15 | jblack | Genji1981: Where do you live? |
| 06:11.14 | rue_mohr | m! cool! they can listen to stuff! |
| 06:11.44 | jblack | As in, hypothetically speaking, a person were to hunt you down and commit a crime of compassion, what address would they be at? |
| 06:12.34 | *** join/#asterisk Thorn (n=thorn@unaffiliated/thorn) |
| 06:13.53 | rue_mohr | t! nowonder my transfers didn't work |
| 06:13.55 | Genji1981 | nevermind.. im about to find out. |
| 06:14.14 | Genji1981 | hoping that my config files are good for 1.4... |
| 06:15.14 | rue_mohr | so if I want to enable transfers I just need to add the tT flags |
| 06:16.01 | [TK]D-Fender | rue_mohr: What phones are you using? |
| 06:16.31 | rue_mohr | analog phones on a T1 channelbank via a T1 card (zaptel) |
| 06:16.38 | *** join/#asterisk scardinal (n=supreme@port816.ds1-suoe.adsl.cybercity.dk) |
| 06:17.04 | rue_mohr | [TK]D-Fender, surprised you dont remember me by now :) |
| 06:17.23 | [TK]D-Fender | rue_mohr: I try to forget as much as I possibly can... |
| 06:17.31 | rue_mohr | nods |
| 06:17.37 | [TK]D-Fender | rue_mohr: Makes room for more things for me to forget later. |
| 06:17.47 | rue_mohr | yup |
| 06:18.01 | [TK]D-Fender | rue_mohr: So what'd I forget this time? |
| 06:18.37 | rue_mohr | I'm the guy with the 3624 mainstreet channelbank |
| 06:18.48 | rue_mohr | who is always asking stupid questions |
| 06:18.58 | [TK]D-Fender | rue_mohr: the second part rings a bell ;) |
| 06:19.09 | [TK]D-Fender | rue_mohr: And yeah I largely forgot about the chqannelback. |
| 06:19.58 | rue_mohr | I want to offer * systems at the company I work at, can our company buy a support thing that I/we can call and get any stupid questions answered (using digium equip) |
| 06:20.58 | *** join/#asterisk icltlfatppl (n=icltlfat@c-24-6-137-42.hsd1.ca.comcast.net) |
| 06:21.01 | rue_mohr | cause for the $1200 we could sell a * system for, a panasonic system would cost over $6000 |
| 06:21.22 | rue_mohr | not including sets either side |
| 06:23.47 | *** join/#asterisk obnauticus (n=obnautic@about/windows/regular/obnauticus) |
| 06:24.10 | [TK]D-Fender | rue_mohr: Exten => whatever,1,Set(ABC=${ABC}moreofhwateverhere) |
| 06:24.20 | *** join/#asterisk Levonk (n=lk@adsl-75-62-140-159.dsl.lsan03.sbcglobal.net) |
| 06:24.38 | [TK]D-Fender | ok, checkout time. later all. |
| 06:24.42 | rue_mohr | that makes sense, I was looking for an operator :) |
| 06:25.02 | [TK]D-Fender | rue_mohr: non, *'s variable handling is quite simply THAT dumb. |
| 06:25.14 | rue_mohr | have a good night |
| 06:25.19 | [TK]D-Fender | ditto |
| 06:36.33 | *** join/#asterisk tzafrir_laptop (n=tzafrir@local.xorcom.com) |
| 06:38.47 | *** join/#asterisk korihor (n=korihor@190.78.32.60) |
| 06:38.50 | *** join/#asterisk Loadrunner (n=Loadrunn@82-170-131-68.ip.telfort.nl) |
| 06:39.13 | *** part/#asterisk Loadrunner (n=Loadrunn@82-170-131-68.ip.telfort.nl) |
| 06:52.34 | *** join/#asterisk h-idrisi (n=h-idrisi@212.103.170.132) |
| 07:04.51 | newbie___ | hi all, i got "Didn't get a frame from channel" & "Bridge stops bridging channels " and the calls hangup , what does it mean ? |
| 07:12.11 | *** join/#asterisk L-info (n=L-info@g0962184.demon.co.uk) |
| 07:30.37 | *** part/#asterisk benneton (n=DELL@89.111.209.66) |
| 07:31.10 | *** join/#asterisk Levonk (n=lk@75.62.137.168) |
| 07:50.40 | *** join/#asterisk zydoon (n=zydoon@41.225.157.222) |
| 07:50.53 | *** part/#asterisk zydoon (n=zydoon@41.225.157.222) |
| 08:01.42 | *** join/#asterisk bijit (n=benji@200.122.188.156) |
| 08:10.58 | *** join/#asterisk coppice (n=chatzill@177.162.17.210.dyn.pacific.net.hk) |
| 08:12.41 | *** join/#asterisk xenonex (n=xenonex@89.218.233.198) |
| 08:15.12 | *** join/#asterisk rcy (n=rcy@S010600003981572c.vc.shawcable.net) |
| 08:20.57 | *** join/#asterisk Levonk (n=lk@adsl-75-62-138-145.dsl.lsan03.sbcglobal.net) |
| 08:24.51 | *** join/#asterisk ArashHemmat (n=arash@91.184.77.134) |
| 08:25.52 | *** join/#asterisk LINKER3000L (n=chatzill@78.32.25.201) |
| 08:52.27 | *** join/#asterisk grEvenX (n=even@pc107-130.ktv.no) |
| 09:02.04 | *** join/#asterisk tkbeat (n=tk@g227027093.adsl.alicedsl.de) |
| 09:16.58 | *** join/#asterisk MrNaz (n=naz@ppp118-208-167-192.lns10.mel4.internode.on.net) |
| 09:21.01 | *** join/#asterisk amessina (n=amessina@2001:470:1f11:68:20e:cff:fe01:d5ec) |
| 09:22.17 | jblack | amessina: Hi. |
| 09:22.24 | jblack | I'm glad you just popped on. |
| 09:22.25 | amessina | hi |
| 09:22.39 | jblack | This might surprise you, but I'm still getting dundi connections |
| 09:23.20 | jblack | I just finished sending a mail to the list about it. |
| 09:23.53 | amessina | not from me. |
| 09:24.01 | jblack | Nope, not you. |
| 09:24.20 | jblack | They both look european. asterisk.swissirc.net and dslb-082-083-035-030.pools.arcor-ip.net. |
| 09:24.24 | jblack | Know them? |
| 09:24.40 | amessina | you mean, you're still getting requests for people to connect, or getting inbound queries? |
| 09:24.51 | jblack | Port connections on 4520 |
| 09:25.28 | jblack | It's not causing me any harm, but I figured I should let you know. |
| 09:25.31 | amessina | i probably know asterisk.swissirc.net |
| 09:27.10 | amessina | yup. |
| 09:27.23 | amessina | do they think they're peered with you. |
| 09:27.38 | jblack | No idea. They must. |
| 09:28.20 | *** join/#asterisk Levonk (n=lk@adsl-75-62-132-224.dsl.lsan03.sbcglobal.net) |
| 09:29.02 | jblack | Like I said, it's not causing me any harm, but I drop packets by default, and that could slow them down if they're waiting for a timeout to a tcp connection. |
| 09:30.16 | jblack | so, how are you doing? |
| 09:32.35 | *** join/#asterisk fordfrog (n=fordfrog@gentoo/developer/fordfrog) |
| 09:35.02 | *** join/#asterisk lesouvage (n=lesouvag@cc341200-a.assen1.dr.home.nl) |
| 09:48.58 | *** join/#asterisk Levonk (n=lk@adsl-75-62-129-136.dsl.lsan03.sbcglobal.net) |
| 10:01.13 | *** join/#asterisk trelane (n=trelane@dsl093-203-152.ind1.dsl.speakeasy.net) |
| 10:10.12 | *** join/#asterisk nighty^ (n=nighty@host217-37-109-17.in-addr.btopenworld.com) |
| 10:17.20 | *** join/#asterisk drmessano (n=nonya@c-76-125-26-150.hsd1.ga.comcast.net) |
| 10:17.47 | *** join/#asterisk Multivac (n=BuRn@ZA1-securenode.echelon.co.za) |
| 10:32.47 | trelane | cries at the apparent death of his polycom 501 which is giving me a boot error 0x20 |
| 10:36.15 | *** join/#asterisk oilinki (n=oil@ppp-124-120-8-137.revip2.asianet.co.th) |
| 10:38.15 | jblack | i got those when I was first setting up my phone. |
| 10:38.30 | jblack | When I was doing autoprovisioning, in fact. I didn't have all the files that were necessary. |
| 10:38.49 | jblack | Check the log for your ftp/web server, and see what's being requested and not served. |
| 10:50.13 | *** join/#asterisk oilinki3 (n=oil@ppp-124-120-13-185.revip2.asianet.co.th) |
| 11:11.33 | knarfly | can someone enlighten me on DUNDI...can I use it to make calls to PSTN users in another state? |
| 11:12.24 | WimpMan | knarfly: If your looking for public/global information, I guess ENUM would be the way to go. |
| 11:16.36 | *** join/#asterisk Levonk (n=lk@adsl-75-62-135-174.dsl.lsan03.sbcglobal.net) |
| 11:20.17 | *** join/#asterisk andreou (i=ee4299@nemesis.ee.teiath.gr) |
| 11:42.53 | *** join/#asterisk hatoon (n=musis@189.71.123.82) |
| 11:52.47 | hatoon | good morning for all |
| 11:53.05 | *** join/#asterisk Levonk (n=lk@adsl-75-62-131-156.dsl.lsan03.sbcglobal.net) |
| 11:53.35 | *** join/#asterisk ElSonico (n=tav@dondo.ampiainen.net) |
| 12:13.13 | *** join/#asterisk gr0mit (n=tim@81.187.32.146) |
| 12:30.23 | *** join/#asterisk Illarane (n=heifer@pdpc/supporter/student/Veratien) |
| 12:33.11 | *** join/#asterisk zydoon (n=zydoon@41.225.157.222) |
| 12:33.18 | *** part/#asterisk zydoon (n=zydoon@41.225.157.222) |
| 13:03.20 | *** join/#asterisk angryuser (n=angryuse@27.216.20.81.dynamic.adsl.abo.nordnet.fr) |
| 13:08.53 | *** join/#asterisk riddlebox (n=james@75-132-225-75.dhcp.stls.mo.charter.com) |
| 13:14.04 | *** join/#asterisk Bananaskin (n=Banana@93-97-226-229.zone5.bethere.co.uk) |
| 13:28.43 | *** part/#asterisk djs (n=djs@unaffiliated/djs26) |
| 13:31.00 | *** join/#asterisk Loadrunner (n=Loadrunn@82-170-131-68.ip.telfort.nl) |
| 13:47.19 | *** join/#asterisk grandpapadot (n=no@adsl-074-185-089-046.sip.bhm.bellsouth.net) |
| 13:58.22 | grandpapadot | ahhh... coffee coffee coffee coffee |
| 14:04.55 | angryuser | good idea btw |
| 14:05.45 | guax | is drinking his coffee |
| 14:06.20 | BBishop | is drinking guax's coffee too |
| 14:06.32 | guax | o_O |
| 14:06.48 | guax | BBishop: that explain the fact that its going away too fast |
| 14:07.00 | BBishop | :D |
| 14:07.56 | riddlebox | hrmm getting errors saying zaptel is not configured corrrectly but it is |
| 14:08.26 | styelz | you must use sip on coffee, it last longer |
| 14:09.19 | guax | =P |
| 14:11.10 | brodiem | codec_coarse and chan_plunger is the way to go |
| 14:16.10 | *** join/#asterisk oilinki (n=oil@ppp-124-121-248-17.revip2.asianet.co.th) |
| 14:20.48 | tzafrir_laptop | styelz, you mean: it is better than zapping coffee? |
| 14:21.53 | tzafrir_laptop | riddlebox, what error, exactly? what do yu have in /proc/zaptel/* ? what in /etc/zaptel.conf ? |
| 14:23.37 | riddlebox | tzafrir_laptop, /proc/zaptel/1 |
| 14:25.22 | riddlebox | tzafrir_laptop, http://www.pastebin.ca/1189599 |
| 14:29.28 | riddlebox | tzafrir_laptop, I copied the files from a working server |
| 14:30.13 | tzafrir_laptop | riddlebox, what error do you get? What do you have on /proc/zaptel/1 ? |
| 14:32.25 | riddlebox | http://www.pastebin.ca/1189611 |
| 14:34.29 | tzafrir_laptop | riddlebox, please run zttest to see if zaptel really provides timing |
| 14:35.27 | riddlebox | tzafrir_laptop, its not doing anyting |
| 14:35.30 | riddlebox | anything |
| 14:36.16 | tzafrir_laptop | so you probably don't get interrupts from the card |
| 14:41.09 | riddlebox | tzafrir_laptop, so what should I do? |
| 14:42.24 | *** join/#asterisk l8router (n=me@d122-109-92-165.sbr12.nsw.optusnet.com.au) |
| 14:43.25 | KP7 | yawns and enjoys some coffee too (perfect way to celebrate * being back online) :) |
| 14:43.51 | Corydon76-dig | riddlebox: try a different slot |
| 14:45.36 | *** join/#asterisk joat (n=joat@ip70-160-147-169.hr.hr.cox.net) |
| 14:48.35 | riddlebox | ok I will shut it down and try that |
| 14:50.54 | *** join/#asterisk MrNaz (n=naz@ppp59-167-135-204.lns3.mel6.internode.on.net) |
| 14:58.24 | *** join/#asterisk kalel008 (n=tamato@41-195-84-21.access.uunet.co.za) |
| 14:58.28 | kalel008 | hi there |
| 14:59.10 | kalel008 | can anyone please help me |
| 14:59.12 | Alton2 | hi |
| 14:59.36 | kalel008 | i need a example of a read and then goto for my ivr |
| 15:00.00 | Alton2 | yeah, funny how hard those things are to find on line |
| 15:00.02 | Alton2 | hold |
| 15:00.30 | Corydon76-dig | Read(foo,my-special-prompt) |
| 15:00.49 | kalel008 | ive ben up for 1 half days figuring it out no sleep |
| 15:00.55 | Corydon76-dig | GotoIf($["${foo}" = "1"]?sometag) |
| 15:02.20 | Corydon76-dig | kalel008: may want to look at the book |
| 15:02.23 | kalel008 | where do i put that in the extensions.conf under my ivr menu after answer? |
| 15:02.24 | Corydon76-dig | ~thebook |
| 15:02.24 | jbot | Asterisk: The Future of Telephony 2nd Edition (ISBN 0-596-51048-9) --- Order yours at http://www.oreilly.com/catalog/9780596510480/ --- Free downloadable PDF http://downloads.oreilly.com/books/9780596510480.pdf --- HTML at http://tfot.leifmadsen.com |
| 15:02.39 | Corydon76-dig | kalel008: yes |
| 15:02.59 | kalel008 | thanks so much im going to try it quick brb |
| 15:03.04 | Alton2 | I always thought the book was kinda light on examples. But I was used to those superb DEC manuals. |
| 15:03.25 | Corydon76-dig | Alton2: check out the appendices |
| 15:03.46 | Corydon76-dig | Alton2: there should be a practical example for every single application in there |
| 15:03.54 | Alton2 | I thought I had, but I will look around. |
| 15:03.59 | Corydon76-dig | I worked very hard to ensure that those examples made sense |
| 15:04.12 | kalel008 | i will check it out |
| 15:04.36 | Alton2 | I've thought the same about PHP documentation, that there weren't many sensible examples. |
| 15:04.41 | kalel008 | can i do it in the gui under the file editor? |
| 15:04.52 | Alton2 | Well, your work is appreciated. Nice that it's on line and available. |
| 15:06.21 | riddlebox | Corydon76-dig, that worked |
| 15:12.47 | riddlebox | whew I didnt want to have to tell my boss, this system wouldnt be ready to be put in this week |
| 15:13.06 | Alton2 | How much did you promise? :-) |
| 15:13.46 | riddlebox | Alton2, didnt promise, but they have been waiting awhile and its been in my queue to do but emergencies kept bumping it back |
| 15:14.05 | Alton2 | Shame you have to work over the weekend. |
| 15:14.27 | *** join/#asterisk outtolunc (n=me@c-67-170-211-86.hsd1.ca.comcast.net) |
| 15:14.31 | riddlebox | Alton2, but I like asterisk and doing it, plus I log my hours and they pay me for them |
| 15:14.45 | Alton2 | Hah, that's a different story! |
| 15:15.29 | riddlebox | Alton2, its cool too because we are setting up asterisk as a voicemail for an avaya partner system, and so that they can use it as a phone tree |
| 15:16.28 | Alton2 | Good, lots of good phone systems out there but they certainly kept the cap on letting you do much with them. |
| 15:16.45 | Alton2 | And the ridiculous prices they charged for voicemail systems/licensing, sheesh. |
| 15:17.09 | riddlebox | yeah the salesman say pbx's are pretty cheap, its the voicemail that bumps it up, well and the phones haha |
| 15:17.56 | Alton2 | Makes me mad how much they charge. Seems like you can do just as much with a pc and a few IP phones. |
| 15:18.40 | *** join/#asterisk [TK]D-Fender (n=chatzill@64.235.218.194) |
| 15:19.00 | riddlebox | yeah I laugh though when I go to a customer site and they ask about VoIP and they say "but dont we need a real fast internet connection?" |
| 15:19.31 | Alton2 | At least they know something about it. Here everything is so backwards that they just think you're trying to rip them off. |
| 15:20.01 | riddlebox | kalel008, did you have a question in asterisk-gui? |
| 15:20.23 | riddlebox | Alton2, where are you? |
| 15:20.35 | Alton2 | south texas, like 1 hour from the Gulf and 5 minutes from Mexico. |
| 15:20.46 | riddlebox | ahh |
| 15:20.50 | Alton2 | McAllen area, if you're familiar with it |
| 15:21.23 | riddlebox | some of our guys went somewhere out there for Win pbx training |
| 15:21.50 | Alton2 | Hmm, I wonder where. Most of the time "South Texas" refers to the San Antonio area. |
| 15:22.02 | Alton2 | 4 hour drive from here. |
| 15:22.29 | riddlebox | all I know is that it was across from a motor sports theme park |
| 15:22.55 | Alton2 | hah, no theme parks around here |
| 15:24.51 | riddlebox | its cool my boss has given me an ACS r7 to have at my house to test this with so I can work on this stuff from home |
| 15:26.17 | Alton2 | What is an ACS r7? |
| 15:26.31 | riddlebox | Alton2, Avaya partner system |
| 15:26.44 | *** join/#asterisk fakhir (n=fakhir@unaffiliated/fakhir) |
| 15:30.58 | kalel008 | voicemenu also have a dialplan right? |
| 15:33.49 | *** join/#asterisk Levonk (n=lk@76.227.118.149) |
| 15:35.21 | *** part/#asterisk kalel008 (n=tamato@41-195-84-21.access.uunet.co.za) |
| 15:38.40 | hi365 | anyone using fetchmail + hylafax? |
| 15:42.02 | Daviey | well fetchmail is irrelevant.. just drop it into a user mail box, and spawn hylafax from procmail hi365 |
| 15:43.32 | hi365 | Damin: thats a bit overly comples. I wan tmy users to send faxes to fax@mydomain which is hosted by google apps. so i figuerd ide use hylafax to retrive the messages, but the script im working with is send the body of the email as the fax, instead of the actual pdf |
| 15:43.51 | hi365 | now using procmail would add an unnesary step ( i think) |
| 15:45.21 | Daviey | i use procmail for email->fax .. however if you have a better way, i'd like to see it |
| 15:46.19 | hi365 | Daviey: i suppose i can set procmail as the mda of fethcmail, but i thinks its an unneseary step. in any even - can i have a peek at your script (or do you pass it directly to faxmail?) |
| 15:47.37 | Daviey | hi365: i can't grab the script from where i am now.. but i can do later |
| 15:48.08 | hi365 | Daviey: hopefully i wont need it then :) if you remember, give me aping |
| 15:48.15 | Daviey | wilco |
| 15:48.23 | Daviey | what field are you submitting the fax number? |
| 15:49.53 | Daviey | hi365: ie, 5454545@somedomain.com or Subject: 5454545 |
| 15:50.34 | hi365 | Daviey: thats part of what im trying to figure out. which should it be (im using the email address fax@mydomain.com, so i guess thats out) |
| 15:51.21 | Daviey | hi365: Then i would think making the subject field the number of the recepient would be the win |
| 15:51.33 | Daviey | or, $number@fax.domain.com ? |
| 15:51.52 | hi365 | and then just pass it to faxmail, or do i need to phrase the email and pass the arguments to faxmail? |
| 15:52.14 | Daviey | hi365: i use sendfax |
| 15:52.19 | hi365 | oh |
| 15:54.21 | Daviey | hi365: what _I_ would recommend... |
| 15:54.31 | Daviey | if no attachment, fax the body of the email |
| 15:54.44 | Daviey | if pdf/ps pass directly to sendfax |
| 15:55.04 | Daviey | if .doc/.odf etc convert into .ps/.pdf |
| 15:55.27 | Daviey | This is why i use procmail to spawn a script, which inturn passes it onto sendfax |
| 15:57.35 | riddlebox | Daviey, thought faxes came as tiff |
| 15:57.50 | Daviey | riddlebox: from email TO fax |
| 15:58.22 | riddlebox | so sendfax will convert to tiff and send out? |
| 15:58.48 | Daviey | riddlebox: shrug, sendfax has native suppoort for .ps and .pdf |
| 15:58.59 | Daviey | I don't know what it does under the covers |
| 15:59.27 | Daviey | faxrcvd, for recieving faxes can send as tiff or pdf.. users tend to prefer pdf |
| 16:14.42 | riddlebox | Daviey, do you have a link for it, I have been thinking of doing something like that, then creating a php page on the server to upload and fax docs out |
| 16:15.04 | jameswf-home | tzafrir_laptop: are you familiar with d i |
| 16:15.23 | tzafrir_laptop | d i? |
| 16:15.24 | Daviey | riddlebox: it was my own scripting that did it, so no link - but i should probably do something to put it online |
| 16:15.33 | Daviey | tzafrir_laptop: debian-installer |
| 16:15.36 | tzafrir_laptop | yes |
| 16:15.52 | hi365 | im not sure that a script is nesesary - if only i could figuer oyu the faxmail variables... |
| 16:16.13 | jameswf-home | tzafrir_laptop: any idea how to make it skip user creation... if I specify root only it prompts for a user |
| 16:16.20 | hi365 | see this example: http://www.ahinc.com/hylafax.html |
| 16:16.34 | hi365 | what the $u@$h $f stuff mean? |
| 16:16.40 | Daviey | jameswf-home: using debian or ubuntu? |
| 16:16.54 | hi365 | user@host faxnum? what else is avalible? |
| 16:17.07 | jameswf-home | ubuntu but from reading the commands should be the same.. |
| 16:17.35 | tzafrir_laptop | To run a custom command at install time: http://www.debian.org/releases/stable/i386/apbs05.html.en#preseed-hooks |
| 16:18.26 | tzafrir_laptop | account setup options: http://www.debian.org/releases/stable/i386/apbs04.html.en#preseed-account |
| 16:19.16 | jameswf-home | yeah read that not to helpful wish it all has a big guide like kickstarts the hard stuff is way easier in di but the simple stuff is undocumented... you should just know i guess |
| 16:19.41 | tzafrir_laptop | jameswf-home, see a bit up there |
| 16:19.54 | tzafrir_laptop | generally you need to point your installer to the preseed file |
| 16:20.05 | tzafrir_laptop | what do you install from? CD? network? |
| 16:20.18 | riddlebox | hi365, i gave up on trying to do all of the faxing in asterisk and just put a fxs port in and send all faxes to that |
| 16:20.50 | jameswf-home | cd... I am using virtual box makes it all pretty easy |
| 16:21.18 | hi365 | riddlebox: and then? im dealing with pri's here. Giving up is just that - giving up. its doeable, im just wating for some good samaritian to come along and show the final peices of my puzle |
| 16:22.29 | tzafrir_laptop | http://www.debian.org/releases/stable/i386/apbs02.html.en shows you how to point the installer to various locations for a preseed file |
| 16:23.44 | riddlebox | hi365, maybe this will help, http://scottstuff.net/blog/articles/2004/03/28/faxing-with-asterisk |
| 16:24.49 | hi365 | riddlebox: thatnsk, but it seems that is using the tx/rx fax apps, which have been nothing hsort of a desaster for me |
| 16:27.21 | jameswf-home | tzafrir_laptop: I have alot of it down and its pointng right like i said di way easier than kickstarts... i just have to eliminate the last few prompts to be completely automated |
| 16:29.08 | riddlebox | hi365, I know what you mean |
| 16:29.23 | hi365 | riddlebox: try hylafax - much, much, much smoother |
| 16:30.07 | riddlebox | I am kinda just tired of messing with it all for a bit |
| 16:33.20 | *** join/#asterisk guax (n=guaxinim@unaffiliated/guaxinim) |
| 16:34.06 | tzafrir_laptop | prompts from the installer? or from specific packages? |
| 16:34.40 | tzafrir_laptop | also: complete the installation (with manual choices) and then look at the generated preseed file. IIRC it is under /var/log/debian-installer |
| 16:36.18 | *** join/#asterisk jebba (n=jebba@unaffiliated/jebba) |
| 16:37.01 | jebba | i'm trying to use jack() but it won't fly. I can `mplayer -ao jack foo.ogg` and it works (as user asterisk). When I call in i see jack happily picks up, but i'm hearing nothing. hints? |
| 16:44.44 | *** join/#asterisk lesouvage (n=lesouvag@cc341200-a.assen1.dr.home.nl) |
| 16:48.00 | *** join/#asterisk fnordus (n=dnall@70.71.225.48) |
| 16:54.29 | *** join/#asterisk l8router (n=me@d122-109-92-165.sbr12.nsw.optusnet.com.au) |
| 16:56.27 | *** join/#asterisk edon (n=edon@albalug/edon) |
| 16:59.43 | *** join/#asterisk tkbeat (n=tk@g227027093.adsl.alicedsl.de) |
| 17:01.13 | *** join/#asterisk jploh (n=jploh@122.53.216.252) |
| 17:02.50 | jploh | hi all, one quick question. at ami, the events outputted is consistent, right? |
| 17:03.18 | jploh | compared to, say, the output logged at app_queue? |
| 17:03.53 | [TK]D-Fender | jploh: there's an entire chapter in the book on this... go read it. |
| 17:04.10 | *** join/#asterisk atis_work (n=atis_wor@193.238.212.171) |
| 17:04.10 | jploh | okay. thanks |
| 17:10.51 | *** part/#asterisk jploh (n=jploh@122.53.216.252) |
| 17:15.00 | *** join/#asterisk xenonex (n=xenonex@89.218.233.198) |
| 17:21.22 | *** join/#asterisk eXistenZ (n=existenz@unaffiliated/existenz) |
| 17:22.10 | *** join/#asterisk dverzolla (n=dverzoll@proxynet.fcl.com.br) |
| 17:23.00 | jebba | garr, i do have asterisk/jack working for like 3 seconds then it all goes to static. |
| 17:23.19 | hi365 | Daviey: still there? any closer to the box with the mail2fax script? |
| 17:23.54 | *** join/#asterisk terracon (n=garry@CPE001cf097a750-CM0012254076d6.cpe.net.cable.rogers.com) |
| 17:24.00 | freem1nd | anyone knows good Nortel reseller located in Montreal, Canada able to test and diagnose DTI on a MICS system? |
| 17:24.48 | dverzolla | hi all, we have a very high load asterisk server and we have problems with ulimit. It is runing in a debian machine. Seems thst asterisk is not accepting the changes we make in ulimit. |
| 17:26.36 | dverzolla | every one have this problem? it is causing our channels to be bloqued. |
| 17:28.46 | *** join/#asterisk hatoon (n=avuenna@189.71.123.82) |
| 17:33.28 | *** join/#asterisk zydoon (n=zydoon@41.225.157.222) |
| 17:33.50 | *** part/#asterisk zydoon (n=zydoon@41.225.157.222) |
| 17:43.58 | *** join/#asterisk spacedokke (n=spacedok@sniper1.usinternet.com) |
| 17:44.28 | spacedokke | is the debian package of asterisk too old to use? (particularly if referencing the oreilly book) |
| 17:45.35 | WimpMan | Unsell you like to re-learn, I'd start right with a current version. |
| 17:46.02 | spacedokke | tarnation :) |
| 17:47.22 | tzafrir_laptop | spacedokke, the package in Etch is a bit old, indeed |
| 17:47.39 | tzafrir_laptop | If you're installing a new Debian system now, it might be a good idea to try Lenny |
| 17:48.25 | tzafrir_laptop | If not, I try to maintain some backported (i386 only) packages at http://updates.xorcom.com/rapid etch main |
| 17:48.35 | spacedokke | nah I have an existing one |
| 17:48.38 | spacedokke | I just like the magic of apt-get |
| 17:49.14 | *** join/#asterisk gerphimum (n=trekkie@cpe-24-174-138-171.satx.res.rr.com) |
| 17:52.06 | rue_mohr | asterisk on a 386? |
| 17:53.46 | [TK]D-Fender | rue_mohr: Windows is a 32-bit extension to a 16-bit graphical shell for an 8-bit operating system originally coded for a 4-bit microprocessor by a 2-bit company that can’t stand 1 bit of competition :) |
| 17:54.06 | [TK]D-Fender | rue_mohr: Aim low, you can always hit the ground! |
| 17:54.11 | rue_mohr | I quite agree :) |
| 17:54.24 | Bananaskin | nice 1 [TK]D-Fender |
| 17:55.37 | ph8 | hey all, i've got a grandstream gxp 2000, i'm using a '9 for an outside line' type setup - does anyone know how i can use asterisk (or configure the grandstream?) to sound a dial tone after 9 has been pressed? |
| 17:55.42 | dverzolla | spacedokke: guy, i'm not using the package version. I compiled the 1.2.29 version. |
| 17:55.56 | rue_mohr | I was stripping down ME once, I think it was, I could a config file that contained a memory patch apparently origionaly required for 95 "this line is required ~~~~ memory hog" was the effect of the comment on the config line |
| 17:55.57 | ph8 | i have ignorepat => 9 but that doesn't seem to do the trick (the grandstream probably batch-sends0 |
| 17:56.22 | rue_mohr | ph8, |
| 17:56.51 | rue_mohr | do you want to have it actually send them to the line right away, or capture and dump the digits they dial |
| 17:57.05 | rue_mohr | on mine, when you press 9, it immediatly connects you with the telco line |
| 17:57.41 | jaytee | face it, Microsoft products are the perfect example of what happens when "bloat" learns to "evolve". |
| 17:57.50 | rue_mohr | ph8, yes or no is ok, I dont need a book answer |
| 17:58.24 | rue_mohr | jaytee, the future of ms os will be interesting/amusing, as the last two they have squeezed out where "uncodable" |
| 17:58.50 | rue_mohr | I think their gonna start making linux apps and selling them |
| 17:59.37 | rue_mohr | I was worried when apple decided to support windows, about which way things would flow, I ocassionaly hear of people buying a mac to run windows on and they pretty quickly figure out it works worse |
| 17:59.49 | jaytee | ever see the photo of the overweight penguin titled MS Linux 1.0 |
| 18:00.28 | ph8 | rue_mohr: I don't really mind either way |
| 18:00.32 | ph8 | it's just having the dial tone that's useful |
| 18:01.09 | rue_mohr | ph8, ok, so is your service provided via ip, t1, or loopstart? |
| 18:01.38 | ph8 | i'm not sure what you mean, i have a server in a DC, the phone is connected by sip |
| 18:01.46 | ph8 | my outbound trunk is from a reseller over IAX2 |
| 18:01.53 | rue_mohr | so your 100% ip then? |
| 18:01.54 | rue_mohr | k |
| 18:02.06 | jaytee | (scratches head) "WTF is this daemon lableled 'Microsoft Access Jet Database Engine To unixODBC Translation Engine' using 200MB of ram and hogging 37% of the CPU?" |
| 18:02.23 | rue_mohr | no wait, that dosn't work, whats your bridge to pots? |
| 18:02.38 | ph8 | yep, the reseller deals with the pstn links |
| 18:02.45 | rue_mohr | jaytee, "jet" <--- make alot of backups |
| 18:02.52 | ph8 | (my iax2 trunk provder) |
| 18:02.54 | rue_mohr | ph8, ok |
| 18:02.56 | *** join/#asterisk jazzmann (n=chatzill@cpc1-lutn9-0-0-cust163.lutn.cable.ntl.com) |
| 18:03.09 | *** join/#asterisk tkbeat (n=tk@g227027093.adsl.alicedsl.de) |
| 18:03.31 | rue_mohr | this sounds like a capture and spill excersize, can anyone agree? |
| 18:03.36 | jaytee | rue_mohr, what's really scary is that the ESENT database used by JET and the ESENT database used by Active Directory are the same. |
| 18:04.23 | rue_mohr | tries to stay on topic, a little.. |
| 18:04.24 | jazzmann | has any idea for chan_mobile.My mobile is connectiong but showing |
| 18:04.26 | jazzmann | 00:12:62:03:C2:0B Nokia 6230au No Headset 0 |
| 18:05.15 | jazzmann | on mobile search |
| 18:05.19 | rue_mohr | could someone who knows more than I do tell me if ph8's solution should be a capture and spill? |
| 18:06.11 | rue_mohr | ph8, in your dialplan, you want to have, (I'm no expert) playtones after they dial 9, there is an option in it that makes it sing a dialtone |
| 18:06.25 | rue_mohr | that or capturedigits does it |
| 18:06.33 | ph8 | cheers |
| 18:06.42 | rue_mohr | k, good luck |
| 18:09.13 | [TK]D-Fender | ph8: ignorepat is only for zaptel FXS. Either your phone must offer the secondary tone (Polycom Can), or you'll have to make "9" a single digit extension which answers into an IVR that plays the dialtone in the background, or call DISA (fugly) |
| 18:09.41 | rue_mohr | option 2, go for option 2 |
| 18:09.52 | ph8 | cheers |
| 18:10.24 | rue_mohr | (he really knows what he's taking about) |
| 18:10.42 | WimpMan | really loves the good old overlap dial. |
| 18:11.28 | [TK]D-Fender | Dial "9" prefixes.... get the hell out of the 80's |
| 18:11.34 | [TK]D-Fender | yuck |
| 18:11.59 | dverzolla | hi all, we have a very high load asterisk server and we have problems with ulimit. It is runing in a debian machine. Seems thst asterisk is not accepting the changes we make in ulimit. |
| 18:13.07 | rue_mohr | ph8, http://downloads.oreilly.com/books/9780596510480.pdf |
| 18:14.26 | ph8 | got a paper copy, thx :) |
| 18:14.34 | rue_mohr | hah, ok |
| 18:14.46 | ph8 | [TK]D-Fender: Just seemed like the right thing to do - all the offices i've ever been in do it |
| 18:14.58 | ph8 | do you think it's better just to distinguish on number length? |
| 18:15.15 | [TK]D-Fender | ph8: Tell your friend you're jumping off a bridge and see if he follows |
| 18:15.45 | WimpMan | Or go work for Siemens. :-) |
| 18:16.48 | rue_mohr | if 9 prefixes are out of date, whats the new way then? I like positive dialing, where pausing half way though a number dosn't cause all hell to break loose |
| 18:17.01 | *** join/#asterisk Levonk (n=lk@adsl-75-62-136-48.dsl.lsan03.sbcglobal.net) |
| 18:17.08 | ph8 | an excellent poitn |
| 18:17.10 | ph8 | * point |
| 18:18.46 | [TK]D-Fender | rue_mohr: How does having (or not) a prefix have ANYTHING to do with a pause in entry screwing with your dial? |
| 18:19.13 | [TK]D-Fender | rue_mohr: Unless of course you land on an alternative match at which point FFS keep your target number handy |
| 18:19.39 | [TK]D-Fender | rue_mohr: My take is if you have trouble dialing a number, odds are you shouldn't be allowed access to a phone. |
| 18:19.58 | WimpMan | likes that one |
| 18:22.26 | [TK]D-Fender | ok, off to hit the water... later all. |
| 18:23.31 | Knightfa| | Any one have some good documentation on setting up a Digium te410p to act as two trunk Groups |
| 18:23.57 | Knightfa| | I want to have two of the t1s used for outbound and two for inbound |
| 18:24.03 | WimpMan | The example zaptel.conf? |
| 18:24.22 | Knightfa| | I think your right :) |
| 18:24.49 | Knightfa| | I thought there was somethigna little more in depth I saw you guys tossing around a week or so ago |
| 18:28.46 | *** join/#asterisk Levonk (n=lk@adsl-75-62-136-125.dsl.lsan03.sbcglobal.net) |
| 18:31.44 | *** join/#asterisk VaNNi (n=VaNNi___@38.98.61.143) |
| 18:33.24 | *** join/#asterisk edon (n=edon@albalug/edon) |
| 18:36.25 | *** join/#asterisk lesouvage (n=lesouvag@cc341200-a.assen1.dr.home.nl) |
| 18:40.06 | *** join/#asterisk Sargun (n=xbmodder@atarack/staff/sargun) |
| 18:40.12 | *** join/#asterisk andrewn (n=andrew@76-191-151-229.dsl.dynamic.sonic.net) |
| 18:41.05 | rasterix | what are the allowed characters in a variable name? |
| 18:41.30 | rasterix | [a-z0-9\-]? |
| 18:42.47 | *** join/#asterisk rickross (n=rickross@supporter/active/rickross) |
| 18:51.09 | rasterix | oh.. and does a variable have to start with alpha? |
| 18:53.26 | rue_mohr | ? |
| 18:53.30 | *** join/#asterisk joat (n=joat@ip70-160-147-169.hr.hr.cox.net) |
| 18:54.01 | rasterix | rue... im just trying to work out the exact rules for a valid variable name |
| 18:54.19 | *** join/#asterisk WilliamK (n=noc@static-71-170-144-28.dllstx.fios.verizon.net) |
| 18:54.28 | rasterix | the books not helping or i cant find it |
| 18:56.55 | jaytee | look in /doc/channelvariables.txt |
| 18:57.34 | TJNII | hmmm.... according to the console I've apparently started dialing the phone in my sleep.... Not good. |
| 18:59.02 | Corydon76-dig | rasterix: there are currently very few rules for variable names |
| 18:59.35 | WilliamK | hiya Corydon |
| 18:59.41 | Corydon76-dig | A couple: variables may not contain '}' or the sequence '${'; variable names should not contain '(' or ')' |
| 19:00.19 | Corydon76-dig | At the very least, variable names may NEVER end with ')' |
| 19:01.53 | Corydon76-dig | Oh, and variable names may not start with '_', as that character is reserved for inheritance |
| 19:02.15 | Corydon76-dig | All other characters are permitted in a variable name |
| 19:02.16 | WilliamK | takes an aggresive approach and pushes those over a cliff that harvest the asterisk lists for email addresses... |
| 19:02.55 | *** join/#asterisk Levonk (n=lk@adsl-76-227-117-205.dsl.lsan03.sbcglobal.net) |
| 19:03.00 | WilliamK | ooops, did I say that out loud? :) |
| 19:03.37 | Corydon76-dig | WilliamK: why take the chance of survival? Use a .50caliber handgun and be done with it |
| 19:04.20 | rasterix | croydon: thanks |
| 19:04.21 | *** join/#asterisk atis_work (n=atis_wor@193.238.212.171) |
| 19:04.53 | WilliamK | interesting thought... |
| 19:05.26 | Corydon76-dig | WilliamK: although more painful deaths are appreciated for spammers |
| 19:05.36 | WilliamK | we had some jerkoff stealing things on our bldg property this week... he had the guts to walk into an area that was prox carded on almost every door too |
| 19:06.27 | WilliamK | by slight chance has anyone here integrated a network monitoring tool in with their voip stuff yet? |
| 19:07.23 | rasterix | corydon: for a simple editor do you think this would be reasonable: 1. do not start with _ 2. allow alphanumeric "_" and "-" |
| 19:07.37 | rasterix | i realise thats not the rules enforced by asterisk... |
| 19:08.05 | rasterix | but it seems reasonable to me... why would anyone include other characters in their variable names... bad practise |
| 19:08.26 | Corydon76-dig | rasterix: Remember that '_' is used for inheritance, so if somebody WANTS inheritance, you probably shouldn't stop them |
| 19:09.38 | Corydon76-dig | but if somebody codes ${_foo}, it probably won't do what they want |
| 19:10.20 | rasterix | im going to show it as invalid if they start it with _ |
| 19:10.36 | Corydon76-dig | i.e. if you do Set(__foo__=bar), remember that the name of the variable being set is ACTUALLY "foo__" |
| 19:11.06 | rasterix | corydon: i think im going to go and read up on inheritance |
| 19:11.09 | Corydon76-dig | (with infinite inheritance) |
| 19:11.13 | rasterix | since i have no clue what your talking about |
| 19:11.36 | Corydon76-dig | rasterix: It's a way to get variables set on destination channels |
| 19:11.58 | Corydon76-dig | i.e. Set(_SIP_CODEC=ulaw) Dial(SIP/123@foo) |
| 19:12.24 | Corydon76-dig | So then SIP host foo will get ulaw as the codec |
| 19:12.30 | knarfly | if I do this ./configure --prefix=/dro/usr/local will all the necessary files and libraries be installed in the right place for my diskless setup? are there other command line variable I need to set in order to make asterisk build in the /dro/usr/local instead of /usr/local/ |
| 19:13.05 | Corydon76-dig | knarfly: check out the output of "./configure --help" |
| 19:13.16 | Corydon76-dig | I think what you said is correct, but check there |
| 19:14.13 | rasterix | corydon: i think im missing the point... but the variable name would be SIP_CODEC in this case? |
| 19:14.57 | Corydon76-dig | Correct |
| 19:15.10 | rasterix | ok im going with the rules i said before |
| 19:15.16 | rasterix | thanks for your help :) |
| 19:15.30 | Corydon76-dig | But when you set a variable in the dialplan, it only affects the current channel, NOT a destination channel |
| 19:15.40 | Corydon76-dig | That's what inheritance changes |
| 19:16.02 | Corydon76-dig | It allows that value to pass to the destination channel when it is created |
| 19:16.25 | rasterix | corydon: i think i understand now... for the moment im only interested in ${variablename} what is valid variablename and i think i have that now |
| 19:17.26 | *** join/#asterisk Levonk (n=lk@adsl-75-62-139-208.dsl.lsan03.sbcglobal.net) |
| 19:18.44 | rasterix | trying to write an editor for a language as "flexible" as asterisk has turned from what i thought would be a few days work to a battle of wills.... |
| 19:18.51 | rasterix | but im going to win |
| 19:18.53 | rasterix | lol |
| 19:22.06 | WimpMan | rasterix: You need to allow names tarting in _ in set commands, but not in ${}. |
| 19:25.18 | *** join/#asterisk Levonk (n=lk@adsl-76-227-119-122.dsl.lsan03.sbcglobal.net) |
| 19:25.42 | rasterix | wimpman: yup thats what im doing... thnx |
| 19:26.58 | rasterix | you no the editor you have written has not quite go there when you find yourself using vim to edit config files >< |
| 19:29.29 | rasterix | i think ill separate out the _ for inheritance in the set commands with its own token... its not strictly part of the variable name |
| 19:30.09 | *** join/#asterisk AnRkey (n=AnRkey@dsl-242-181-145.telkomadsl.co.za) |
| 19:31.40 | AnRkey | I keep getting this message, "Access Denied - Sorry, I cannot let you do that, Dave.", when I go here >> http://192.168.0.5:8088/asterisk/static/config/cfgbasic.html Can anyone tell me where to look set the access? |
| 19:31.59 | rasterix | if anyone has a really long complex extensions.conf that does not contain private information id appreciate a copy... i need to test this editor on extensions.conf i didnt write |
| 19:37.23 | kaldemar | AnRkey: authenticate here: asterisk/static/config/index.html |
| 19:38.07 | AnRkey | tried that, i get this >> Access Denied |
| 19:38.08 | AnRkey | Sorry, I cannot let you do that, Dave. |
| 19:38.21 | kaldemar | oh, it should redirect.. |
| 19:38.36 | AnRkey | any idea's |
| 19:39.31 | kaldemar | enable static content in http.conf. |
| 19:39.50 | AnRkey | k |
| 19:42.02 | AnRkey | Not Found |
| 19:42.03 | AnRkey | Nothing to see here. Move along. |
| 19:42.14 | AnRkey | its making fun of me |
| 19:42.15 | AnRkey | :p |
| 19:44.53 | kaldemar | have you installed the GUI? :P |
| 19:45.35 | *** join/#asterisk Levonk (n=lk@adsl-76-230-110-221.dsl.lsan03.sbcglobal.net) |
| 19:45.43 | AnRkey | hmm |
| 19:45.44 | AnRkey | brb |
| 19:45.45 | kaldemar | i.e. do you have the content in /var/lib/asterisk/static-http ? |
| 19:45.46 | AnRkey | haha |
| 19:46.17 | AnRkey | no |
| 19:46.18 | AnRkey | soz |
| 19:51.25 | *** join/#asterisk keulin (n=cray@bne75-5-82-231-224-34.fbx.proxad.net) |
| 20:01.37 | *** join/#asterisk Levonk (n=lk@adsl-76-243-65-165.dsl.lsan03.sbcglobal.net) |
| 20:04.55 | *** join/#asterisk atis_work (n=atis_wor@193.238.212.171) |
| 20:05.50 | gr0mit | anyone here ever used macros within the dial command? |
| 20:17.42 | heedly | gr0mit: what about them? |
| 20:23.00 | *** join/#asterisk ElSonico (n=tav@dondo.ampiainen.net) |
| 20:23.54 | jameswf-home | interesting ubuntu server cant be installed on a processor that doesn't support pae |
| 20:27.50 | *** join/#asterisk ElSonico (n=tav@dondo.ampiainen.net) |
| 20:29.22 | AnRkey | what is pae? |
| 20:34.52 | jaytee | physical address extension |
| 20:38.30 | *** join/#asterisk EI5GTB (n=Paul@78.16.31.145) |
| 20:39.05 | *** join/#asterisk l8router (n=me@d122-109-92-165.sbr12.nsw.optusnet.com.au) |
| 20:39.59 | *** join/#asterisk rickross (n=rickross@supporter/active/rickross) |
| 20:40.26 | gr0mit | heedly, sorry for delay |
| 20:41.34 | *** join/#asterisk Roge152 (n=roger@stjhnf0124w-142162082245.pppoe-dynamic.nl.aliant.net) |
| 20:41.56 | Roge152 | Can asterisk provide caller ID, if i dont subscribe to caller ID from my Provider ? |
| 20:42.36 | carrar | You have set caller ID name and number to whatever you want |
| 20:42.38 | carrar | so yes |
| 20:42.50 | Roge152 | Inbound caller ID |
| 20:42.59 | carrar | You can change it yes |
| 20:43.01 | Roge152 | To display who is calling me |
| 20:43.04 | carrar | yes |
| 20:43.07 | Roge152 | Cool |
| 20:43.25 | Roge152 | Thats a decent savings |
| 20:43.50 | carrar | I'd just toss all the numbers and names in a db and query it for every call |
| 20:44.09 | Roge152 | .... |
| 20:44.19 | Roge152 | Im not always going know who's calling me though |
| 20:46.32 | drmessano | No you won't |
| 20:46.33 | carrar | well you need at least the number |
| 20:46.45 | carrar | then you can create your own index to names from numbers |
| 20:46.54 | carrar | based on numbers you know |
| 20:46.58 | drmessano | [16:42] <Roge152> Can asterisk provide caller ID, if i dont subscribe to caller ID from my Provider ? <-- No |
| 20:47.10 | Roge152 | Ty drmessano |
| 20:47.13 | *** join/#asterisk mvanbaak_ (n=michiel@asterisk/contributor-and-bug-marshal/mvanbaak) |
| 20:47.22 | carrar | I'm thinking of PRI where caller id NAME is seperate from caller id NUMBER |
| 20:47.40 | Roge152 | Sorry carrar, i should have specified |
| 20:48.04 | drmessano | If CallerID info is not sent, I don't care what kind of line you have, you won't have callerID |
| 20:48.05 | carrar | then no |
| 20:48.13 | drmessano | It's that simple |
| 20:48.20 | Roge152 | Makes sence drmessano |
| 20:48.28 | carrar | You can create a random caller id generator :) |
| 20:48.38 | Roge152 | Heh heh |
| 20:49.54 | Roge152 | The creator of asterisk was interviewed on FLOSS weekly recently. Great episode |
| 20:50.08 | drmessano | Is that like the random answer generator where when someone asks if the will get voicemails on their asterisk box with the power off, someone had to come up with some wild ass scenario about using SRV records to send calls to a box and RSYNC'ing the VMail back when the box comes back online, rather than just saying "No" |
| 20:50.33 | drmessano | If so, i'll take two |
| 20:51.02 | Roge152 | http://twit.tv/floss38 |
| 20:59.15 | *** join/#asterisk lesouvage (n=lesouvag@cc341200-a.assen1.dr.home.nl) |
| 21:03.12 | *** join/#asterisk rickross (n=rickross@supporter/active/rickross) |
| 21:04.48 | rue_mohr | Knightfa|, still here? |
| 21:04.55 | rue_mohr | bbl |
| 21:05.30 | *** join/#asterisk atis_work (n=atis_wor@193.238.212.171) |
| 21:07.13 | lesouvage | Does anyone of you ave experience with integrating Asterisk with Microsoft SQL, can it be done? |
| 21:07.50 | *** join/#asterisk xpl (i=xpl@84.126.207.62.dyn.user.ono.com) |
| 21:09.09 | WilliamK | omg... why on earth would you want to do that? |
| 21:09.52 | WilliamK | MS SQL = known for being extremely slow |
| 21:10.05 | lesouvage | WilliamK: Good question, because a paying customer wants it that way |
| 21:10.46 | WilliamK | could be done via ODBC |
| 21:10.53 | WilliamK | but I'm not sure I'd want to |
| 21:15.39 | lesouvage | Yes I was thinking about that, but I'm not sure that it will actualy work properly. |
| 21:15.44 | rasterix | lesouvage: cant you use agi? |
| 21:17.06 | rasterix | hand the connection to ms sql to a different language that supports it? |
| 21:17.59 | rasterix | lol uhoh silence normally means i made a stupid suggestion :( |
| 21:18.28 | lesouvage | <PROTECTED> |
| 21:18.41 | *** join/#asterisk TJNII (n=TJNII@209.234.89.237) |
| 21:18.53 | lesouvage | But I'm somebody else can program that if that is the way. |
| 21:19.05 | lesouvage | But I'm sure somebody else can program that if that is the way. |
| 21:19.19 | *** join/#asterisk Levonk (n=lk@adsl-76-243-64-124.dsl.lsan03.sbcglobal.net) |
| 21:19.24 | rasterix | if odbc doesnt work right |
| 21:19.26 | rasterix | its an option |
| 21:20.18 | Corydon76-dig | lesouvage: use FreeTDS, ODBC, and func_odbc within Asterisk |
| 21:20.46 | Corydon76-dig | There's no need to dip into AGI |
| 21:21.11 | rasterix | hah... rasterix = shot down in flames |
| 21:21.14 | Corydon76-dig | func_odbc is available natively in 1.4 and as a backport in 1.2 |
| 21:21.40 | Corydon76-dig | though honestly, you really don't want it in 1.2. The support for TDS databases isn't there in 1.2 |
| 21:22.02 | Corydon76-dig | Works fine for other databases, though, like MySQL and Postgres. |
| 21:22.40 | Corydon76-dig | Fun-filled fact: I wrote func_odbc originally as a simple way to interface to MS SQL Server |
| 21:22.56 | Corydon76-dig | The original use was a blacklist |
| 21:26.07 | lesouvage | Thanks for all the advice! |
| 21:35.27 | denon | Roge152: if you're talking incoming calls, no. . there's no way for asterisk to know who's calling you if your telco doesn't tell you |
| 21:35.49 | denon | whoops, I was scrolled up |
| 21:36.25 | *** join/#asterisk rickross (n=rickross@supporter/active/rickross) |
| 21:44.21 | rasterix | are the parenthesis after an application in extensions.conf optional? |
| 21:44.50 | Qwell | rasterix: I would highly recommend not using that "other" syntax |
| 21:44.52 | rasterix | i.e. is exten => 1,1,Answer valid or should it be exten => 1,1,Answer() |
| 21:44.57 | Qwell | oh |
| 21:45.15 | Qwell | it's fine in that case |
| 21:45.45 | rasterix | hmm |
| 21:45.56 | rasterix | what did you think i meant? |
| 21:46.07 | Qwell | nothing |
| 21:46.13 | Roge152 | Ty denon |
| 21:47.24 | drmessano | So you really have to know nothing about asterisk to write asterisk books and/or applications |
| 21:47.30 | drmessano | God I have been wasting my time |
| 21:47.54 | rasterix | when u said "other" syntax it perked my interest since im trying to "loosely" define the syntax for asterisk |
| 21:48.03 | Qwell | ~book |
| 21:48.23 | jbot | Asterisk: The Future of Telephony 2nd Edition (ISBN 0-596-51048-9) --- Order yours at http://www.oreilly.com/catalog/9780596510480/ --- Free downloadable PDF http://downloads.oreilly.com/books/9780596510480.pdf --- HTML at http://tfot.leifmadsen.com, or see ~buybook |
| 21:48.23 | Qwell | rasterix: start there, it's been defined |
| 21:48.23 | Qwell | jbot: ? |
| 21:48.23 | [TK]D-Fender | drmessano: I want my wee... oh forget it |
| 21:48.35 | rasterix | ive read the book |
| 21:48.41 | drmessano | I'm writing an IDE for Perl. So, what's perl? |
| 21:48.43 | rasterix | it doesnt answer everything though |
| 21:49.12 | [TK]D-Fender | drmessano: Don't do perl... it'll give you clam |
| 21:49.37 | *** join/#asterisk rickross (n=rickross@supporter/active/rickross) |
| 21:49.38 | Roge152 | python tbh |
| 21:49.42 | rasterix | should i autocorrect answer to answer() |
| 21:49.44 | drmessano | Ok, i'm going to write an IDE for Python. So, who can tell me about Python? |
| 21:50.05 | [TK]D-Fender | rasterix: No, you should learn to do it right the first time |
| 21:50.09 | Roge152 | Id like to see a good GUI builder for TK |
| 21:50.15 | rasterix | fender: i do do it write |
| 21:50.19 | Roge152 | with built in python editor and intellisense |
| 21:50.20 | rasterix | right* |
| 21:50.27 | rasterix | its the other people that dont |
| 21:51.21 | drmessano | Is it going to have a spell and syntax checker too, Mr dont? |
| 21:52.00 | rasterix | drmessano: are you talking to me? |
| 21:52.03 | heedly | haha |
| 21:52.12 | heedly | how about you don't worry about the other people? |
| 21:52.25 | heedly | Who's going to write a program to worry about you! |
| 21:52.29 | drmessano | ill do what i wan't, thanks |
| 21:52.44 | heedly | kk |
| 21:52.53 | drmessano | lol |
| 21:53.06 | drmessano | I couldn't figure out a way to butcher 'thanks' |
| 21:53.18 | drmessano | Duh |
| 21:53.26 | drmessano | ill do what i wan't, thank's |
| 21:53.57 | rasterix | drmessano: with all due respect... you need to grow up before you hit 40 |
| 21:53.58 | [TK]D-Fender | drmessano: "10x" |
| 21:54.13 | drmessano | rasterix: What language is this famous IDE going to be written? |
| 21:54.44 | drmessano | rasterix: You need to learn something about asterisk before I am 40, as well. |
| 21:55.24 | rasterix | drmessano: i thought id write it in vbscript |
| 21:55.33 | drmessano | vbsc.. |
| 21:55.51 | drmessano | You're writing an application in vbscript? |
| 21:55.56 | *** join/#asterisk guax (n=guaxinim@unaffiliated/guaxinim) |
| 21:55.59 | drmessano | You're fucking kidding me, right? |
| 21:56.00 | rasterix | drmessano: im feeding you lines |
| 21:56.14 | rasterix | drmessano: since u have nothing worthwhile to add anyway |
| 21:56.21 | *** join/#asterisk xenonex (n=xenonex@89.218.233.198) |
| 21:56.39 | drmessano | rasterix: Don't you think it's important to have at least an intermediate understand of asterisk before trying to code an IDE for it's dialplans? |
| 21:56.55 | drmessano | You profess to know very little. Why shouldn't I RUN LIKE HELL from your app? |
| 21:57.40 | rasterix | drmessano: i think i have an above intermediate understanding of asterisk... its just that ur a genius (geez) |
| 21:57.49 | drmessano | Learning a few bits about syntax is great, but don't you have to have some UNDERSTANDING of how it WORKS as a WHOLE? |
| 21:57.57 | [TK]D-Fender | rasterix: That only speaks for the idiocy of the masses ;) |
| 21:58.16 | drmessano | rasterix: You have made it more than clear that you know little.. you have shown it and professed it on several occasions. |
| 21:58.21 | drmessano | rasterix: What changed in a week? |
| 21:58.26 | drmessano | rasterix: Osmosis? |
| 21:58.33 | drmessano | rasterix: Spaceship? |
| 21:58.46 | [TK]D-Fender | "Think how dumb the average American is. then remember that half of them are even DUMBER" - George Carlin |
| 21:58.51 | rasterix | drmessano: you have know understanding of social etiquette... it doesnt stop you joining an irc channel |
| 21:59.01 | drmessano | "no", not "know" |
| 21:59.11 | Roge152 | Is it proper or atleast ok, to run other servers on an asterisk box apache/mysql/email etc ? |
| 21:59.12 | drmessano | and you know nothing about me.. |
| 21:59.12 | rasterix | thank you |
| 21:59.26 | [TK]D-Fender | Roge152: Sure, why not |
| 21:59.27 | drmessano | But what I know about you, is that you admit to knowing little about asterisk |
| 21:59.33 | Roge152 | Cool, |
| 21:59.41 | *** join/#asterisk l8router (n=me@d122-109-92-165.sbr12.nsw.optusnet.com.au) |
| 21:59.53 | rasterix | i have seen you are unable to conduct yourself with any respect for others |
| 21:59.54 | [TK]D-Fender | Roge152: Its a question of load+eggs in a basket |
| 21:59.56 | drmessano | Frankly, I would be scared to run a dialplan through this app of yours |
| 22:00.06 | [TK]D-Fender | Roge152: Keep an eye on that ration and make up your own mind from there |
| 22:00.08 | drmessano | rasterix: HA.. you have seen nothing |
| 22:00.12 | Roge152 | Ty |
| 22:00.18 | [TK]D-Fender | ratio* |
| 22:00.53 | rasterix | i wish i knew how this irc chat works... where is the damn block button |
| 22:00.59 | drmessano | rasterix: Perhaps some time learning asterisk would be beneficial.. Maybe download Skype in the meantime |
| 22:01.09 | *** join/#asterisk alias555 (n=jeffb@stgt-4d02f73c.pool.mediaWays.net) |
| 22:01.14 | Roge152 | rasterix, /ignore user |
| 22:01.29 | drmessano | Roge152: You are taking ALL of the fun out of it |
| 22:01.42 | Roge152 | fun out of what ? |
| 22:01.43 | [TK]D-Fender | drmessano: Go read a Dale Carnegie book... |
| 22:01.51 | drmessano | Roge152: Let him screw up 10 or 12 things in his IRC client before he finds it.. don't just LEAD him to it... |
| 22:01.58 | Roge152 | ...... |
| 22:02.09 | Roge152 | This guy doesnt deserve to use opensource |
| 22:02.23 | drmessano | lol |
| 22:02.26 | drmessano | Me? |
| 22:02.29 | Roge152 | yeah |
| 22:02.36 | drmessano | Awww.. :( |
| 22:02.53 | drmessano | Should I just go to Add/Remove Programs and uninstall Asterisk then? |
| 22:02.53 | rasterix | dont get drawn in roge152 |
| 22:02.54 | Roge152 | The idea is to share knowledge and help each other. Not point and laugh because you mite know something someone else doesnt |
| 22:02.56 | drmessano | I r sad |
| 22:03.09 | Roge152 | What distro drmessano ? |
| 22:03.15 | drmessano | Roge152: I realize you are new here, but rasterix is a borderline troll.. |
| 22:03.33 | drmessano | Roge152: Don't speak of things you do not understand |
| 22:03.45 | rasterix | borderline troll? |
| 22:03.49 | drmessano | I am running Asterisk on Windows Me |
| 22:03.53 | Roge152 | Oh |
| 22:03.54 | rasterix | what is that supposed to mean? |
| 22:03.57 | drmessano | Is that I how I get rid of it? |
| 22:04.03 | drmessano | Add/Remove? |
| 22:04.12 | Roge152 | Yeah i believe thats how it is done in windows |
| 22:04.29 | Roge152 | I didnt know there was an asterisk for windows |
| 22:04.33 | drmessano | Thank you.. God that saved me from reformatting again |
| 22:04.45 | drmessano | That would have been 3 times this week |
| 22:04.47 | *** join/#asterisk rickross (n=rickross@supporter/active/rickross) |
| 22:05.15 | rasterix | roge152: this channel can be a bit of a shock... you think the main asterisk channel will be a hub of knowledge sharing... it turns out its full of children that have to ridicule everyone that enters |
| 22:05.46 | drmessano | rasterix: Actually there is a lot of knowledge sharing.. but you're a dweeb, so you get treated like one.. |
| 22:05.53 | Roge152 | ..... |
| 22:06.01 | Roge152 | Hmm |
| 22:06.16 | Roge152 | Interesting |
| 22:06.22 | [TK]D-Fender | drmessano: cool it, you're the one acting like a borderline troll |
| 22:06.25 | drmessano | Roge152: Ignore him.. he's a help vampire.. There's lot of help to be had here |
| 22:06.55 | drmessano | [TK]D-Fender: I guess I am not trying hard enough |
| 22:07.47 | [TK]D-Fender | drmessano: You mean this isn't your natural state? There may be hope for you. Fortunately I don't run on "hope", I run on "results" |
| 22:07.49 | Roge152 | Some real nice 1U's on ebay for cheap |
| 22:08.37 | Roge152 | Nice sun box's too |
| 22:08.46 | Roge152 | spends his whole check before he gets it |
| 22:09.00 | drmessano | [TK]D-Fender: No, I am just off of my game today. On a good day I can give 110% with little effort. I feel like my heart just isn't it to cross into full frontal Trollonomy today. |
| 22:09.09 | drmessano | in it* |
| 22:09.46 | drmessano | I can't even smell someone installing a Trixbox right now :( |
| 22:09.48 | [TK]D-Fender | Roge152: Welcome to the grand world of irreverent consumerism. |
| 22:10.14 | Roge152 | You said it |
| 22:10.27 | drmessano | I got a nice SFF GX150 933MHZ with 256MB Ram and some unknown hard drive for $40 yesterday |
| 22:10.40 | Roge152 | Not a bad deal |
| 22:10.44 | drmessano | fits perfectly on a 19 inch rack shelf |
| 22:10.47 | drmessano | Well |
| 22:11.10 | drmessano | I had to carry 3 miles in the damn heat.. So i'm thinking I should have ordered one for $75 now |
| 22:11.14 | drmessano | But.... hey |
| 22:11.55 | drmessano | He wanted $50 for the complete system.. cut $10 off to keep the monitor |
| 22:12.02 | drmessano | lol |
| 22:13.00 | drmessano | I really want like 3 or 4 of those boxes |
| 22:13.03 | Roge152 | How many U's in your shelf ? |
| 22:13.38 | drmessano | I want to say the top edge sits just below the top of a 3U shelf |
| 22:13.56 | heedly | $40 is kinda expensive for a paper weight. |
| 22:14.08 | drmessano | A paper weight? |
| 22:14.19 | Qwell | sounds like a firewall |
| 22:14.28 | drmessano | It's a perfect cheap box for a small asterisk system |
| 22:14.40 | drmessano | More importantly, one I can run app_rpt on |
| 22:14.47 | drmessano | Set out at the repeater site |
| 22:14.54 | heedly | lol and you don't already have an asterisk system running? |
| 22:15.07 | drmessano | Just a couple dozen |
| 22:15.16 | drmessano | It's called "bought for a purpose" |
| 22:16.21 | drmessano | I'd like 2 more and then 1 for parts only |
| 22:16.39 | heedly | app_rpt looks cool. |
| 22:16.56 | heedly | I've always wanted todo that, but need the ham liceanse first :) |
| 22:17.08 | drmessano | I already have the license, and the repeater |
| 22:17.20 | Roge152 | I wish it weren't so expensive to get decent upstream BW, Id never outsource any of my hosting needs |
| 22:17.24 | drmessano | Just need to get the PC put together |
| 22:17.31 | drmessano | and configged |
| 22:19.02 | drmessano | A buddy of mine wants to buy a $700 repeater controller, but I can do pretty much everything it will do in Software, nevermind all the neat extras |
| 22:19.40 | drmessano | I just don't want to spend real money on a PC that I can pretty much guarantee a shortened life on |
| 22:20.04 | drmessano | Easier to find a couple boxes for cheap I can just throw away when they fry |
| 22:22.38 | *** join/#asterisk obnauticus (n=obnautic@about/windows/regular/obnauticus) |
| 22:23.45 | *** part/#asterisk korihor (n=korihor@190.78.32.60) |
| 22:36.43 | *** join/#asterisk fakhir (n=fakhir@unaffiliated/fakhir) |
| 22:38.54 | KP7 | quick informational not really asterisk question- what ITSP's are you guys using and has anyone been using an ITSP will support enough inbound lines to replace a traditional phone company- I'll answer first... I'm using Broadvoice- no real asterisk support but i been using them was a couple of years, no easy setup for multiple lines but it can be done |
| 22:40.33 | [TK]D-Fender | KP7: You need a major upstream carrier like Level3 for something like that |
| 22:41.56 | KP7 | Level3 is providing ITSP services now? |
| 22:42.12 | *** join/#asterisk rickross_ (n=rickross@supporter/active/rickross) |
| 22:43.48 | knarfly | what if a residential user like me wanted a good ITSP with * and more than just a few inbound calls at once, say 5-10 simultaneous calls. |
| 22:44.05 | KP7 | exactly knarfly |
| 22:44.14 | [TK]D-Fender | knarfly: Just about all the common ones offer these kinds of services |
| 22:44.27 | [TK]D-Fender | KP7: Level3=itsp. |
| 22:44.37 | KP7 | 5 to 10 inbound? |
| 22:44.41 | *** join/#asterisk rickross_ (n=rickross@supporter/active/rickross) |
| 22:44.42 | knarfly | are the expensive? |
| 22:44.59 | heedly | L3 is very expensive. |
| 22:45.06 | knarfly | KP7, yes. mostly to do conference calls with my biz associates |
| 22:45.20 | heedly | there's a trigger that lists some popular ones.. |
| 22:45.28 | heedly | ~itsp |
| 22:45.34 | jbot | [~itsp] An ITSP is an Internet telephony Service Provider or "VoIP Telephone company". The allow you to either PLACE calls to the PSTN (called Termination), RECEIVE calls from the PSTN (called Origination), or both. Some offer fixed rates, others $/min. Enter ~itsplist-us (USA) or ~itsplist-ca (Canada) for a listing of popular ITSPs |
| 22:45.34 | KP7 | [TK]D-Fender: thats interesing, i was a Level customer up until 'bout 2 years ago and I never saw that- then again, it via VZ |
| 22:45.40 | knarfly | oh well then I better just take two L3 accounts |
| 22:45.44 | KP7 | ahhh ok |
| 22:46.16 | heedly | KP7: it's an enterprise level product with a 10k or monthly commit. |
| 22:46.21 | KP7 | knarfly: I have that same need and I am going to be doing some online training and i need to do 'bout 10 |
| 22:46.27 | KP7 | geez |
| 22:46.51 | KP7 | ~itsplist-us |
| 22:46.52 | jbot | [~itsplist-us] Here are some popular ITSPs (USA) starting with the more respected ones : http://www.teliax.com , http://connect.voicepulse.com , http://www.nufone.net , http://www.broadvoice.com, http://www.jnctn.com , http://www.bandwidth.com , http://vitelity.net |
| 22:47.26 | knarfly | I use a place called splitinfinity...they were excellent when they first started out but now they seem to have grown and are not giving away all the freebies I once enjoyed...like an 800 DID they let me have for no charge for about 1 year |
| 22:47.42 | KP7 | from what i've scene the basic ITSP provides only do a 3 way calling kinda deal |
| 22:48.22 | knarfly | but if you've got the bandwidth and conferencing setup on your * server then you can do much more than 3 way |
| 22:48.33 | KP7 | knarfly: i hate when that happens- get successful and they forget WHY they got successful *laff* |
| 22:49.36 | knarfly | KP7, well I wouldn't say that about these guys...they just got into their model which is to turn a profit...can't blame them for that |
| 22:49.40 | KP7 | knarfly: yea if they're route the calls to me- broadvoice won't, i'd have to do multiple accounts and then do a call-forward-on-busy in each account to set up a hunt group |
| 22:50.22 | [TK]D-Fender | KP7>from what i've scene the basic ITSP provides only do a 3 way calling kinda deal <- you're oly looking at cheapo-residential accounts. |
| 22:50.37 | KP7 | knarfly: that great its just that successful sometime hurts the long time customers like yourself |
| 22:50.55 | KP7 | [TK]D-Fender: nah, talked to someone 'bout the business accounts |
| 22:50.59 | knarfly | KP7, splitinfinity worked well for my needs. The trouble was my biz associated who couldn't deal with anything other than an analog phone on a PSTN...no one bothered to follow me into the 21st century |
| 22:51.13 | drmessano | I've been with level3 since they were level2... oh so many years ago |
| 22:51.21 | [TK]D-Fender | KP7: Bad place, didn't ask right, or bad rep. |
| 22:52.10 | KP7 | [TK]D-Fender: bad place? as in bad provide to use? |
| 22:52.36 | [TK]D-Fender | KP7: For you not to be able to get normal business-class services, SOMETHING is wrong. |
| 22:53.31 | KP7 | [TK]D-Fender: i again- thats what i told the guy- unlimited this and that doesn't mean squat if only one person and call in or out simultaneously |
| 22:53.52 | [TK]D-Fender | KP7: And where are you talking about? |
| 22:54.13 | [TK]D-Fender | KP7: And "unlimited" HAS limitations. Talk time on a single channel or two won't be it |
| 22:54.34 | KP7 | [TK]D-Fender: and having to set up multiple accounts and manually build a hunt group seem to be a big kludgy |
| 22:54.40 | rasterix | is "include=>" valid within [global] and [general] contexts? |
| 22:54.47 | [TK]D-Fender | KP7: And Nowhere do I see that being a requirement |
| 22:54.55 | Qwell | rasterix: anywhere |
| 22:54.58 | knarfly | ok....make PREFIX=/diskless/usr/local install 8-) |
| 22:55.09 | KP7 | [TK]D-Fender: and this is why I was asking what other folks are doing :) |
| 22:55.11 | knarfly | soon my diskless server will get it's first test running Asterisk |
| 22:55.13 | rasterix | qwell: thanks |
| 22:55.26 | Qwell | even outside of a context |
| 22:55.34 | knarfly | and then I will make a fortune selling embedded Asterisk systems....no! |
| 22:55.52 | [TK]D-Fender | KP7: Every facet of what you seem to have discussed with this rep seems to be chump residential services. You should have had yourself transferred to the right dept |
| 22:56.01 | rasterix | i understood that for #include wasnt sure about include=> |
| 22:56.14 | Qwell | erm, not outside of contexts, I guess |
| 22:56.36 | Qwell | ...maybe |
| 22:57.15 | knarfly | oops...back to the old drawing board...it just crashed again during the zaptel build...oh woe is me! |
| 22:57.42 | knarfly | i invented drawing boards....! |
| 22:58.06 | Qwell | I wonder what the guy who invented drawing boards did when his ideas didn't pan out |
| 22:58.14 | rasterix | lol |
| 22:58.22 | *** join/#asterisk ManxPower (n=manxpowe@146.sub-70-220-76.myvzw.com) |
| 22:58.31 | Qwell | ManxPower would probably know |
| 22:58.32 | KP7 | [TK]D-Fender: might be worth another call to specifically talk to their business office but something like this like you said so basic, for my money it should be on the web site with the other plan and it isn't. I shouldn't have to call for something like this |
| 22:58.53 | Qwell | ManxPower: when the guy who invented drawing boards was trying to come up with his next idea, what did he do when his ideas didn't pan out? |
| 22:59.05 | [TK]D-Fender | KP7: and I asked you who you were talking about... |
| 22:59.20 | *** join/#asterisk brut- (n=brut@h66-173-4-254.mntimn.dedicated.static.tds.net) |
| 22:59.50 | [TK]D-Fender | Qwell: Before it was "back to basics". "drawing boards" are ADVANCED |
| 22:59.58 | KP7 | knarfly: thats what hosed my * installation- a bad build of zaptel- had to use the svn version since i had upgraded to 2.6.26.3 in the process of troubleshooting |
| 23:00.51 | KP7 | [TK]D-Fender: oh, i missed that- i was talking about business account but it don't see why even a residential customer can't get more than one line |
| 23:01.13 | KP7 | [TK]D-Fender: hell if you have kids, you have 2 lines anyway |
| 23:01.15 | KP7 | fax |
| 23:01.20 | [TK]D-Fender | KP7: NAME <--- |
| 23:01.25 | KP7 | home business or home office |
| 23:01.30 | KP7 | 4 right there |
| 23:01.34 | knarfly | KP7, apparently it doesn't seem to find the source code during the zaptel build. I wish they would come up with a zaptel port that did not require the sources. And since I'm building into a different slice than the usual I'm not sure what to do at this point. |
| 23:02.10 | *** part/#asterisk ManxPower (n=manxpowe@146.sub-70-220-76.myvzw.com) |
| 23:02.10 | knarfly | KP7, I'm running on FreeBSD not Linux... |
| 23:02.21 | KP7 | knarfly: i was just 'bout to ask you that |
| 23:02.48 | KP7 | its not compiling? |
| 23:02.57 | KP7 | [TK]D-Fender: what are you asking me? |
| 23:03.02 | knarfly | KP7, I built a Fedora 9 server here last week and it works great...got it and the FreeBSD * box connected via iax |
| 23:03.14 | *** part/#asterisk hads (n=hads@argon.nice.net.nz) |
| 23:03.24 | [TK]D-Fender | KP7: what PROVIDER |
| 23:03.32 | KP7 | [TK]D-Fender: oh, Broadvoice |
| 23:03.41 | KP7 | knarfly: nice |
| 23:04.04 | knarfly | it starts to compile but then fails...I can't be sure from the error messages |
| 23:04.16 | KP7 | [TK]D-Fender: I'm going to research that list that comes on on here tho |
| 23:05.02 | KP7 | knarfly: what was the last error posted? |
| 23:05.10 | KP7 | during the make |
| 23:08.34 | *** join/#asterisk Mog (n=mog@c-68-62-219-86.hsd1.al.comcast.net) |
| 23:08.35 | *** mode/#asterisk [+o Mog] by ChanServ |
| 23:14.14 | *** join/#asterisk j0 (n=dan@S01060016b6b541d2.va.shawcable.net) |
| 23:16.26 | knarfly | zttool.c:548: error: 'NEWT_EXIT_HOTKEY' undeclared (first use in this function) |
| 23:16.27 | knarfly | *** Error code 1 |
| 23:16.56 | Qwell | install newt-devel |
| 23:17.02 | knarfly | then it bailed out on the other dependency builds...which is fully expected once zaptel crashed. |
| 23:18.36 | *** join/#asterisk joat (n=joat@ip70-160-147-169.hr.hr.cox.net) |
| 23:18.36 | knarfly | Qwell, newt is one of the dependencies, I'll have to check if it was installed or not....but right now my gorgeous Brazilian GF is here and is demanding attention...tough job but someone's got to do it....bbl |
| 23:18.42 | Qwell | knarfly: no worries, I've got it. you install zaptel |
| 23:18.52 | knarfly | 8-) |
| 23:19.36 | *** join/#asterisk LARefugee (n=chatzill@c-76-104-191-194.hsd1.wa.comcast.net) |
| 23:20.08 | KP7 | pops in |
| 23:21.12 | LARefugee | hi! under ubuntu asterisk running desktop session which audio device is best to use for console dialing / answering ? |
| 23:21.52 | WimpMan | One that supports 8K samplerate. |
| 23:22.15 | LARefugee | WimpMan: /dev/dsp is always busy alternative? |
| 23:22.32 | WimpMan | alsa |
| 23:23.07 | LARefugee | WimpMan: is that stable? Does it work for you? |
| 23:23.25 | WimpMan | With a soundcard, yes. |
| 23:23.49 | WimpMan | With an USB headset not supporting 8KHz it's horrible. |
| 23:24.16 | LARefugee | WimpMan: Ok I'll try it. modules.conf then alsa.conf /dev/???? |
| 23:24.30 | jblack | LARefugee: Just get a soft client? |
| 23:24.47 | WimpMan | It's not a /dev thingie. Try "default". |
| 23:25.01 | LARefugee | WimpMan: will do thanks! |
| 23:27.06 | *** join/#asterisk sacitec (n=tobi@201.144.211.82) |
| 23:29.31 | jblack | How has the channel been today? |
| 23:30.01 | drmessano | Some a-hole named Dr Messano is stirring up crap |
| 23:30.06 | drmessano | Other than that it's been quiet |
| 23:30.31 | jblack | oh, that jackass is around all the time. Take him with a grain of salt, and use him for the entertainment value. :) |
| 23:31.08 | jblack | Hey, did you see last night, where rasterix complained I was to omean to him? |
| 23:31.09 | drmessano | Yeah, he's nothing but a troll.. He probably has a small wee wee |
| 23:31.20 | jblack | I hear radio waves can do that. |
| 23:31.23 | drmessano | lol |
| 23:31.31 | drmessano | rasterix complained about you? |
| 23:31.37 | *** join/#asterisk Blackvel (n=blackvel@dslb-088-065-064-140.pools.arcor-ip.net) |
| 23:31.37 | jblack | To me, about me. |
| 23:32.04 | *** join/#asterisk ManxPower (n=manxpowe@146.sub-70-220-76.myvzw.com) |
| 23:32.07 | jblack | Asked me to be nice, so I was. |
| 23:32.17 | drmessano | I have made it a point to be overly mean to him, but it doesn't help that he's a pussy with no backbone. Did you tell rasterix there's no such thing as Santa? |
| 23:32.43 | jblack | Nah. I tried to be nice. At which point he started discussing his plans to make a windows editors to edit * config files on linux. |
| 23:32.52 | drmessano | Oh yes |
| 23:33.00 | jblack | He's gonna make an editor better than vim... Oh, you did catch it |
| 23:33.04 | Blackvel | hi. is asterisk version 1.4.21.2 working with a patton smartnode 4636? asterisk suddenly segfaults on centos 5.2 in chan_sip module |
| 23:33.07 | *** join/#asterisk xpl (i=xpl@84.126.212.2.dyn.user.ono.com) |
| 23:33.07 | drmessano | His Asterisk IDE.. |
| 23:33.12 | xpl | hi there |
| 23:33.17 | jblack | aye. |
| 23:33.20 | jblack | hi xpl. |
| 23:33.32 | *** join/#asterisk khronos (n=khronos@aquaman.perryinstitute.org) |
| 23:33.35 | jblack | Blackvel: I don't know. Perhaps google might. |
| 23:33.40 | jblack | oh, wait, centos 5.2? |
| 23:33.46 | jblack | ~centos52bug |
| 23:33.50 | jbot | [~centos52bug] There is a bug compiling Zaptel up to 1.4.11/1.2.26 on CentOS/RHEL 5.2: error in xpp/xdefs.h. Workaround: uncheck "xpp" (Astribank) driver in menuselect. Fixed in SVN. Patches: http://bugs.digium.com/12889, or trouble compiling x86_64 packages? Report a bug to CentOS! ".i386 packages should not satisfy dependencies for .x86_64 packages." |
| 23:33.51 | xpl | jblack can you tell me who can i dial with unknow number ? |
| 23:33.54 | jblack | Perhaps you have a 64 bit problem. |
| 23:33.56 | drmessano | jblack: He's admitted he knows little about asterisk, yet takes a name that sounds asterisk-eque, and then tells everyone he's writing an Asterisk dialplan IDE? What is WRONG with him? |
| 23:34.36 | jblack | xpl: With a pattern match. _NXXNXXXXXX will match anywhere from 1001000000 to 9999999999. |
| 23:34.56 | Qwell | jblack: that isn't going to cause a crash |
| 23:35.11 | jblack | Qwell: Good call. Thanks. |
| 23:35.18 | jblack | That would just be a build error. |
| 23:35.38 | Blackvel | jblack: i am not using zaptel at all |
| 23:35.40 | Roge152 | ubuntu does it best |
| 23:35.45 | Roge152 | sudo apt-get install asterisk |
| 23:35.55 | jblack | Blackvel: It was bad advice anyways. |
| 23:36.09 | Blackvel | np |
| 23:36.15 | jblack | Blackvel: You mean a full fleged crash, as in like a segfault? |
| 23:36.40 | Blackvel | sig 11. gdb shows mem crash |
| 23:36.54 | jblack | so possibly a double free or some such. |
| 23:37.23 | jblack | i'm not sure that * works under valgrind, but you can give running * (with the debugging symbols) under valgrind. |
| 23:37.31 | jblack | You can also try building * with libefence. |
| 23:37.35 | Blackvel | something with sip protocol which my patton box handles a bit differently. this isdn bri shit is going to get me REALLY crazy now :) |
| 23:38.12 | Blackvel | now I thought throwing away bristuff and patching heavily asterisk would fix ALL my problems including echos |
| 23:38.16 | Blackvel | now astersk segfaults :) |
| 23:38.25 | Blackvel | you fix one thing and you get a new problem haha |
| 23:38.35 | jblack | I wish more effort made everything work. |
| 23:39.08 | *** join/#asterisk CrazyTux[m] (n=CrazyTux@ip68-111-67-4.oc.oc.cox.net) |
| 23:39.10 | Blackvel | have to ask that company tomorrow about patton - asterisk integration |
| 23:39.23 | LARefugee | hello I'm back.. I'm able to console dial to an ALSA channel and I get no errors but I hear no sound. I'm on an ubuntu desktop session. Any suggestions? |
| 23:39.46 | Blackvel | maybe its just a silly option which is why patton sets non standard sip options (probably I do not even need that) |
| 23:40.01 | Blackvel | or maybe i can try another asterisk version |
| 23:40.20 | Blackvel | anyone runs patton smartnode boxes with asterisk (some special version) or special sip options? |
| 23:40.28 | jblack | certainly you should file a bug. |
| 23:40.32 | Blackvel | jupp |
| 23:40.54 | jblack | since you're building anyays, try running it under valgrind |
| 23:41.02 | Blackvel | and since I dont have to patch complete asterisk with bristuff anymore I can even patch it :) |
| 23:41.18 | Blackvel | good tip |
| 23:41.19 | jblack | or take the core and use gdb to get a backtrace |
| 23:41.26 | LARefugee | WimpMan: are you here? |
| 23:42.01 | drmessano | LARefugee: Shouldn't you be worried about the storm and less about DISA? |
| 23:42.22 | jblack | He needs to call a cab |
| 23:42.26 | LARefugee | Ha! I'm a refugee from Los Angeles actually. |
| 23:42.29 | Qwell | LA is a long way to go |
| 23:42.31 | Qwell | yeah.. |
| 23:43.08 | drmessano | You moved from Los Angeles to New Orleans? You poor bastard.. Guess you can't win |
| 23:43.13 | CrazyTux[m] | LARefugee, where are you at now |
| 23:43.20 | LARefugee | Seattle |
| 23:43.25 | jblack | LOL |
| 23:43.59 | CrazyTux[m] | is loving this Irvine, CA weather up :) *pokes* LARefugee |
| 23:44.02 | jblack | Didn't a volcano start goign active up there not too long ago? |
| 23:44.19 | drmessano | Seattle is a good choice.. Too emo to get hit by a hurricane.. If one did hit, someone would just write a song about it. |
| 23:44.39 | Blackvel | anyone interested to take a look on the gdb backtrace? http://pastebin.com/m730413a7 |
| 23:44.44 | LARefugee | St. Helens vented a bit well over a year ago. Nothing since. |
| 23:45.06 | Blackvel | i gotta go. 2 am here and I am tired. will be back in some hours. |
| 23:45.21 | jblack | Whatever you do, don't move to Wyoming valley, pa. |
| 23:45.27 | jblack | You could cause a flood. |
| 23:45.28 | drmessano | I have been totally out of the loop.. when the hell did Nirvana break up? |
| 23:45.30 | drmessano | Holy crap |
| 23:45.47 | *** join/#asterisk coppice (n=chatzill@177.162.17.210.dyn.pacific.net.hk) |
| 23:45.50 | jblack | drmessano: Well, kurt cobain died like 15 years ago. |
| 23:45.53 | [TK]D-Fender | drmessano: My guess is after Kurt Cobain's death |
| 23:46.05 | LARefugee | Christ Novoselic still lives up here I think. |
| 23:46.08 | [TK]D-Fender | drmessano: You know what colour his eyes were when he died? |
| 23:46.10 | drmessano | Good god, has it been 15 years already? |
| 23:46.12 | jblack | Which spawned the Foo Fighters. |
| 23:46.19 | jblack | drmessano: Give or take a few years. |
| 23:46.30 | drmessano | [TK]D-Fender: No |
| 23:46.32 | [TK]D-Fender | drmessano: Blue. On "blue" this way, one "blue" that way :) |
| 23:46.37 | [TK]D-Fender | One* |
| 23:46.39 | drmessano | LOL |
| 23:46.47 | jblack | Yeah. He died in 1994, so it's been 14 years |
| 23:46.48 | drmessano | I think I remember that one |
| 23:46.53 | drmessano | AH yes |
| 23:47.00 | drmessano | Right after I graduated HS I think |
| 23:47.37 | drmessano | No, month before |
| 23:48.52 | LARefugee | So has anyone ever got sound through the ALSA channel over an Ubuntu desktop session? |
| 23:49.14 | jblack | ESD is probably taking control over alsa. |
| 23:49.15 | *** join/#asterisk [hC] (n=hardcore@S01060016b6b53c0c.vc.shawcable.net) |
| 23:49.29 | KP7 | LARefugee: have you test your setup to make sure you have audio |
| 23:49.36 | KP7 | like by playing a movie |
| 23:49.43 | LARefugee | KP7: Yes I can play music |
| 23:49.49 | KP7 | and can you record? |
| 23:50.25 | jblack | KP7: "Ubuntu" doesn't use Alsa directly. It uses ESD, which in turn uses alsa. |
| 23:50.31 | LARefugee | I'm not concerned with recording. Should I be? |
| 23:50.33 | KP7 | ahh |
| 23:50.42 | jblack | LARefugee: It's probably simple audio device contention. |
| 23:51.06 | jblack | You can verify by killing esd. |
| 23:51.10 | KP7 | I'm on slackware/kde |
| 23:51.23 | KP7 | so i yep... kill arts and esd |
| 23:51.41 | LARefugee | Jblack: that's a thought. I'll look at that. |
| 23:57.01 | Blackvel | cu |
| 23:58.44 | knarfly | for the record...Kurt Cobain did not die...he shot himself...no offense but at least a million guys would have gladly traded their problems for his. |