| 00:02.58 | *** join/#asterisk fakhir (n=fakhir@unaffiliated/fakhir) |
| 00:04.28 | ManxPower | khronos: you will need a T-1 crossover cable |
| 00:05.02 | *** part/#asterisk lesouvage (n=root@cc341200-a.assen1.dr.home.nl) |
| 00:05.07 | drmessano | Pinout as follows ---> ????? <-----------> ????? |
| 00:05.16 | drmessano | Youre welcome |
| 00:05.59 | *** join/#asterisk JoseBravo (n=jbravo@190.159.97.124) |
| 00:06.49 | ManxPower | voip-info.org will have the diagrams |
| 00:07.12 | JoseBravo | I have this net scheme (SIP Client)---Internet---(IPtables Router/NAT)---Asterisk |
| 00:07.38 | ManxPower | ~sipnat |
| 00:07.39 | jbot | [~sipnat] Quick guide on configuring * + SIP behind NAT : http://www.aocomputing.net/?p=3 , otherwise check the WIKI at http://www.voip-info.org/wiki/view/Asterisk+SIP+NAT+solutions |
| 00:10.34 | *** join/#asterisk anthm (n=anthm@freeswitch/developer/anthm) |
| 00:16.39 | JoseBravo | Im doing portforwarding ports 5060 and 10000:10100 to the asterisk server, now I can connect but I can't listed anything in my softphone... any idea? |
| 00:16.49 | khronos | ManxPoer: been reading and the documentation I've found sayd if I want to send pri signaling back to a pbx I need to use pri_net |
| 00:18.39 | [TK]D-Fender | khronos: Correct |
| 00:18.57 | [TK]D-Fender | khronos: And you'll also want to set your span to provide timing, not take it. |
| 00:19.21 | [TK]D-Fender | khronos: span = X,0,0...... |
| 00:26.56 | khronos | Ok, so something like: |
| 00:27.08 | khronos | span=1,0,0pri_net,b8zs? |
| 00:27.37 | khronos | ztcfg says my type should be either |
| 00:27.44 | [TK]D-Fender | khronos: No, signalling belings in zapata, timing belongs in zaptel |
| 00:28.09 | [TK]D-Fender | khronos: Go look at the sample configs. This is not a question you should need to ask. |
| 00:28.13 | mvanbaak | or upgrade and go with dahdi |
| 00:28.21 | [TK]D-Fender | khronos: The sample configs spell it all out. |
| 00:35.11 | LiNeTuX_Home | is zapata and zaptel going to be dahdiata and dahditel? |
| 00:35.37 | mvanbaak | no |
| 00:40.58 | *** join/#asterisk subdolus (n=subdolus@subby.afraid.org) |
| 00:49.43 | seanbright | zapata.conf is chan_dahdi.conf (i believe) and zaptel.conf is dahdi.conf |
| 00:56.58 | LiNeTuX_Home | seanbright: thx ... that's not as bad as what I made it out to be at least. Does this mean we no longer have "Zap" channels as well? |
| 00:58.39 | seanbright | correct |
| 00:58.45 | seanbright | 1.4.22 supports both |
| 00:58.53 | seanbright | 1.6.0 and up will support only DAHDI |
| 00:59.06 | seanbright | so Dial(DAHDI/g0/4105551212) |
| 00:59.08 | seanbright | etc. |
| 01:01.09 | seanbright | sorry, not _will_ support... _do_ support |
| 01:01.16 | Kobaz | the daddy of all channel drivers |
| 01:02.58 | seanbright | a poorly thought out name, to be sure. |
| 01:11.04 | mchou | oh crap. ipkall just went down |
| 01:11.44 | mchou | maybe ipkall needs a bail-out |
| 01:18.24 | *** join/#asterisk acetar (n=honer@r74-195-200-141.end1cmtc01.enidok.ok.dh.suddenlink.net) |
| 01:22.42 | *** part/#asterisk beek (n=klinebl@65.211.106.242) |
| 01:23.51 | *** join/#asterisk JoseBravo (n=jbravo@190.159.97.124) |
| 01:24.51 | JoseBravo | I have my asterisk over a firewall/nat with iptables. I did a port forwarding to UDP ports. But when I try to call from my softphone I can't listen anything... Any idea? |
| 01:27.27 | seanbright | ~sipnat |
| 01:27.28 | jbot | [~sipnat] Quick guide on configuring * + SIP behind NAT : http://www.aocomputing.net/?p=3 , otherwise check the WIKI at http://www.voip-info.org/wiki/view/Asterisk+SIP+NAT+solutions |
| 01:27.31 | seanbright | JoseBravo: ^^^ |
| 01:27.41 | seanbright | that will be $125 |
| 01:27.58 | seanbright | (and if you have questions beyond that... i really don't know the answer) |
| 01:30.50 | zuez | Bleh, documentation for OpenSIPS + dispatcher module looks to be almost non-existant |
| 01:33.53 | *** join/#asterisk fakhir_ (n=fakhir@unaffiliated/fakhir) |
| 01:54.02 | *** join/#asterisk andrewn (n=andrew@76-191-151-229.dsl.dynamic.sonic.net) |
| 01:54.11 | LiNeTuX_Home | wonders why VMWare Workstations' NAT is sooo slllooowwww |
| 01:59.46 | *** join/#asterisk Winkie (n=urmom@ur.fa.gs) |
| 02:02.55 | Qwell | might be the NIC drivers. what guest OS? |
| 02:05.03 | LiNeTuX_Home | Qwell: F9 on my Compaq nc8430 w/intel 3945 |
| 02:05.24 | LiNeTuX_Home | guest is Cent 5 |
| 02:05.58 | LiNeTuX_Home | but it's not the guest... if i bridge the connection, it's about 20x's faster |
| 02:07.03 | *** join/#asterisk coppice (n=chatzill@33.155.17.210.dyn.pacific.net.hk) |
| 02:13.45 | Qwell | *shrug* |
| 02:13.49 | Qwell | never seen that |
| 02:13.53 | *** join/#asterisk RB2 (n=RB2@pool-71-255-92-114.nwrknj.east.verizon.net) |
| 02:18.31 | implicit | zuez: let me know if you're looking for help w/ dispatcher module, it is pretty simple to use |
| 02:18.32 | LiNeTuX_Home | Qwell: me either... testing something now... I think it happened after I installed the new version of Wksn.... |
| 02:23.00 | drmessano | wants to license the flaming lips catalog for asterisk hold music |
| 02:23.52 | *** join/#asterisk anthm (n=anthm@freeswitch/developer/anthm) |
| 02:40.40 | *** join/#asterisk anthm (n=anthm@freeswitch/developer/anthm) |
| 02:41.04 | *** join/#asterisk anthm (n=anthm@freeswitch/developer/anthm) |
| 02:43.12 | drmessano | I think I just hit my "holy crap that's cool" for the week |
| 02:43.56 | LiNeTuX_Home | did it involve a toaster, some string and a whisk? |
| 02:44.14 | drmessano | Found a video of G N' R from March of 1986 performing "Dont Cry"... before they were signed, and 5 years before Use Your Illusion |
| 02:45.14 | LiNeTuX_Home | the RIAA will promptly remove that for you. |
| 02:45.32 | drmessano | lol |
| 02:46.54 | drmessano | There's actually a lot of old pre-geffen GNR stuff on "that one video site" |
| 02:48.29 | drmessano | I was looking for some pre-sellout Metallica, but apparently that was so long ago that the 8mm it was recorded on has degraded over time |
| 02:49.27 | LiNeTuX_Home | it's a shame folks will let stuff rot - or worse yet throw it away - when there are tons of folks who would gladly restore it for free |
| 02:50.17 | drmessano | I take that back |
| 02:50.28 | drmessano | All the pre-sellout Metallica stuff is on punchcards |
| 02:50.34 | drmessano | So there may be a chance! |
| 02:50.38 | LiNeTuX_Home | heh |
| 02:51.07 | coppice | its sad how little video recording there is of bands from before the MTV era |
| 02:51.07 | LiNeTuX_Home | wonders how big of a stack of punchcards it would take for a 10 minute DVD-quality clip |
| 02:51.45 | coppice | LiNeTuX_Home: 80 bytes per card. Do the maths |
| 02:52.09 | *** join/#asterisk shriven (n=shriven@cpe-076-182-080-161.nc.res.rr.com) |
| 02:52.13 | WimpMan | And how many do you have to read per second. |
| 02:52.32 | WimpMan | Reminds me of the Colossus story. |
| 02:52.36 | coppice | though I guess it depends whether you want to use 60s era compression or something more modern |
| 02:52.38 | LiNeTuX_Home | coppice: ahhh, but the missing piece of the equation: how thick is a card? |
| 02:53.08 | coppice | well, 500 cards was a big handful. say 10cm thick |
| 02:53.35 | LiNeTuX_Home | so 4K = 10cm ... |
| 02:53.40 | LiNeTuX_Home | that's a lot of cm |
| 02:54.42 | shriven | Hello. I'm having a bit of confusion, and probably missing something, but I cant' figure out what. I'm having trouble getting my sip clients to use the non NATed ip address from their environment. ie: I'm seeing Reg. Contact lines like this in sip show peer victor: Reg. Contact : sip:victor@172.16.2.15:4234;rinstance=3ca8fe983192f2ed Shouldn't that be the user's externally routable address? Furthermore when the users makes a call the |
| 02:55.01 | shriven | I've tried bot nat=route and nat=true |
| 02:55.04 | shriven | doesn't seem to help |
| 02:55.50 | shriven | some further info... My asterisk server is not NATed but it is behind a firewall, but I have opened any ports that it seems to need. |
| 02:57.56 | WimpMan | LiNeTuX: Do you already have a number of m³/s? |
| 02:58.38 | LiNeTuX_Home | DVD = 5 Mbit/s |
| 02:59.56 | WimpMan | So about 1½m of cards /s. |
| 03:00.37 | LiNeTuX_Home | jeeezus. |
| 03:01.13 | WimpMan | Ah, found specs: 187x83x0.17mm |
| 03:01.15 | LiNeTuX_Home | depending on the audio quality and number of streams, you might be looking at 600-700MiB |
| 03:02.18 | WimpMan | So it's ~1.33 m/s |
| 03:03.25 | WimpMan | That would be about 48s/m³ |
| 03:03.43 | LiNeTuX_Home | so a full blown movie could be over 18,000M tall |
| 03:04.13 | LiNeTuX_Home | or 18km |
| 03:04.22 | LiNeTuX_Home | that's a long movie |
| 03:04.54 | WimpMan | No the weight might be interesting. |
| 03:05.49 | LiNeTuX_Home | Could you imagine the hopper - and the machine - it would take to be able to stream punchcards at 5Mbit/sec ? |
| 03:06.44 | LiNeTuX_Home | I mean, max DVD bitrate is 9570 kbit/sec |
| 03:06.56 | WimpMan | guesses a few hundred in parallel would do. |
| 03:07.02 | LiNeTuX_Home | heh |
| 03:07.19 | LiNeTuX_Home | "Damnit! We lost sync! Machine 2 is down again!" |
| 03:07.33 | LiNeTuX_Home | "Okay boys, stack 'em back up again!" |
| 03:07.37 | WimpMan | Let's take a thousand. Still have to get 18m of cards fed into each. |
| 03:08.36 | coppice | nothing wrong with punchcards. I did a lot of interesting work on punchcards |
| 03:08.46 | *** join/#asterisk kfb (n=kfb@c-76-116-240-157.hsd1.pa.comcast.net) |
| 03:09.59 | LiNeTuX_Home | thinks about all the mean things you could do to coworkers and puchcards... repunching someone elses' programs just because the didn't buy you lunch... |
| 03:10.18 | LiNeTuX_Home | s/the/they |
| 03:13.11 | vader-- | Do any of you guys have templates for contracts? I am looking for a contract template to do some network cabling and setup a small business' network. |
| 03:13.42 | Qwell | <coppice> nothing wrong with punchcards. I did a lot of interesting work on punchcards |
| 03:13.46 | Qwell | welcome to 2008... |
| 03:15.11 | WimpMan | eel, I had to lears about punchcards for exams in 1996. |
| 03:15.26 | WimpMan | So you can see immediately what it's worth. |
| 03:16.02 | drmessano | <-- Has an MCSE in Windows 3.1 |
| 03:18.56 | LiNeTuX_Home | ~sipphone |
| 03:19.06 | LiNeTuX_Home | what's the bot for software sip phone? |
| 03:20.25 | LiNeTuX_Home | n/m... i just remembered the name of it |
| 03:22.12 | *** join/#asterisk rpm (n=russell@24.64.109.249) |
| 03:30.52 | *** join/#asterisk kamanashisroy (n=kamanash@119.30.34.6) |
| 03:34.02 | mchou | drmessano: hey, do you mind calling up your own ipkall # and see if you get a busy signal? I think they may be down |
| 03:34.53 | mchou | drmessano: either that or they never detected hang up on my end. :( |
| 03:53.19 | *** join/#asterisk mvanbaak_ (n=michiel@asterisk/contributor-and-bug-marshal/mvanbaak) |
| 03:55.13 | *** join/#asterisk [gnubie] (n=[gnubie]@cm141.omega112.maxonline.com.sg) |
| 04:07.21 | *** join/#asterisk implicit (n=bayan@unaffiliated/implicit) |
| 04:28.33 | ManxPower | drmessano: <-- (used to) knows PRG-II |
| 04:28.42 | ManxPower | *sigh* That would be RPG-II |
| 05:32.14 | *** join/#asterisk joelsolanki (i=joelsola@124.125.150.32) |
| 05:32.20 | joelsolanki | Hi friends |
| 05:33.08 | joelsolanki | i have a h323 gatekeeker and all the clients are g723 based. but as major providers doesnt support g723 we have a necessity to convert H323 g723 to g729 codec. |
| 05:33.15 | joelsolanki | is this possible in asterisk ? |
| 05:34.56 | coppice | I assume you mean G.723.1. The only G.723.1 transcode support in * is using Digium's hardware transcoding card. Note that G.723.1 transcoded to G.729 sounds bloody awful |
| 05:36.38 | *** join/#asterisk implicit (n=bayan@unaffiliated/implicit) |
| 05:37.26 | joelsolanki | oh. |
| 05:37.46 | joelsolanki | you mean voice clarity is not good when doing transcoding in g723.1 to g729 corect? |
| 05:38.15 | coppice | right. in general one low bit rate codec transcoded to another suffers badly |
| 05:39.54 | [TK]D-Fender | joelsolanki: think of it as a photocopy of a photocopy |
| 05:40.20 | joelsolanki | hmm ok |
| 05:40.42 | [TK]D-Fender | joelsolanki: that transcode is almost as bad as it gets... |
| 05:41.10 | joelsolanki | so better is have clients upgrade from g723 to g729 |
| 05:49.19 | *** join/#asterisk shriven (n=shriven@cpe-076-182-080-161.nc.res.rr.com) |
| 05:49.43 | scooby2 | is there a way to use a single queue but have different announcements/hold music/etc based on the number called? |
| 05:50.05 | shriven | Hello.... I'm trying to get imap voicemail storage working. If I use tls it just dies, so trying it without it I get some odd issues. |
| 05:50.21 | shriven | I get this on the asterisk side: |
| 05:50.22 | shriven | app_voicemail.c:1999 mm_log: IMAP Error: Can't do /authuser with this server |
| 05:50.32 | shriven | and on the imap server side I get this: |
| 05:50.47 | shriven | Oct 5 01:48:25 gabriel imapd: LOGIN: DEBUG: ip=[::ffff:64.105.202.244], command=LOGOUT |
| 05:50.48 | shriven | Oct 5 01:48:25 gabriel imapd: LOGOUT, ip=[::ffff:64.105.202.244] |
| 05:51.02 | shriven | so looks like it's going straight to logout, that seems quite odd to me! |
| 05:51.24 | shriven | previously without the notls flas set it did this first: |
| 05:51.35 | shriven | Oct 5 01:48:08 gabriel imapd: LOGIN: DEBUG: ip=[::ffff:64.105.202.244], command=STARTTLS |
| 05:51.35 | shriven | Oct 5 01:48:08 gabriel imapd: couriertls: accept: error:14094418:SSL routines:SSL3_READ_BYTES:tlsv1 alert unknown ca |
| 05:51.56 | shriven | so it looks like the tls issue is related to the cert, but I'm not concerned with that now |
| 05:52.11 | shriven | the point is, is t correct for the first command from the asterisk to be LOGOUT? |
| 05:56.38 | *** join/#asterisk Doc (n=scott@willers.employees.org) |
| 06:02.01 | vader-- | Do any of you guys have templates for contracts? I am looking for a contract template to do some network cabling and setup a small business' network. |
| 06:02.17 | *** part/#asterisk CrazyTux (n=brandon@ip68-111-67-4.oc.oc.cox.net) |
| 06:06.01 | [TK]D-Fender | joelsolanki: Never transcode from one lossy codec to another |
| 06:08.30 | joelsolanki | agree |
| 06:09.20 | joelsolanki | [TK]D-Fender |
| 06:09.31 | joelsolanki | is there a way to use asterisk as proxy? |
| 06:10.06 | [TK]D-Fender | joelsolanki: * is not a proxy, it is a B2BUA |
| 06:10.41 | joelsolanki | hmm |
| 06:17.08 | *** join/#asterisk logicwrath (n=no@c-68-42-253-39.hsd1.mi.comcast.net) |
| 06:17.42 | logicwrath | ~book |
| 06:17.42 | jbot | [book] Asterisk: The Future of Telephony 2nd Edition (ISBN 0-596-51048-9) --- Order yours at http://www.oreilly.com/catalog/9780596510480/ --- Free downloadable PDF http://downloads.oreilly.com/books/9780596510480.pdf --- HTML at http://tfot.leifmadsen.com or see ~buybook |
| 06:36.51 | Ericounet | hello |
| 06:49.33 | *** join/#asterisk implicit- (n=bayan@unaffiliated/implicit) |
| 06:52.23 | *** join/#asterisk CrazyTux (n=brandon@ip68-111-67-4.oc.oc.cox.net) |
| 07:01.05 | *** join/#asterisk mateo_au (n=chatzill@c122-106-221-182.belrs3.nsw.optusnet.com.au) |
| 07:41.53 | *** join/#asterisk pixlated (n=not@ool-44c0746a.dyn.optonline.net) |
| 07:42.58 | *** join/#asterisk tzafrir_laptop (n=tzafrir@local.xorcom.com) |
| 07:52.18 | *** join/#asterisk implicit (n=bayan@unaffiliated/implicit) |
| 07:52.25 | *** join/#asterisk Dieno (i=dd847525@gateway/web/ajax/mibbit.com/x-bad672530ce99e6f) |
| 07:54.56 | Dovid | hello |
| 07:56.01 | Dieno | helloz |
| 07:56.21 | Dieno | does anyone know where to get manual or help for app_radius |
| 07:56.24 | Dieno | ? |
| 07:56.56 | jblack | Google, perhaps |
| 07:58.05 | tzafrir_laptop | help radius<tab><tab> ? |
| 07:58.16 | tzafrir_laptop | (in the asterisk cli) |
| 07:58.22 | Dieno | :-s tired of gooling only found one command |
| 07:58.26 | tzafrir_laptop | core show application radius<tab><tab> ? |
| 07:58.30 | Dieno | Radius(CPP) lol |
| 07:58.45 | Dieno | hmmm ok kool let me try it ou |
| 09:00.51 | *** join/#asterisk Bhaal (i=bhaal@freenode/staff-emeritus/bhaal) |
| 09:09.25 | *** join/#asterisk oilinki3 (n=oil@ppp-124-120-19-11.revip2.asianet.co.th) |
| 09:26.01 | *** part/#asterisk Doc (n=scott@willers.employees.org) |
| 09:47.14 | *** join/#asterisk fordfrog (n=fordfrog@gentoo/developer/fordfrog) |
| 09:57.53 | *** join/#asterisk voxter (n=voxter@dpc674557030.direcpc.com) |
| 10:07.58 | *** join/#asterisk [gnubie] (n=[gnubie]@cm141.omega112.maxonline.com.sg) |
| 10:08.38 | *** join/#asterisk voxter (n=voxter@dpc674557030.direcpc.com) |
| 10:23.37 | *** join/#asterisk Kernel_Core (n=I@85.133.155.134) |
| 10:27.06 | Kernel_Core | hi all |
| 10:30.02 | *** join/#asterisk _Krieger_ (n=warsword@ip233.15.airbites.od.ua) |
| 10:32.01 | _Krieger_ | now i have ast1.4 and dahdi (i use 'dummy' driver); but when i use MeetMe i have such output: "app_meetme.c:2469 find_conf: No DAHDI channel available for conference, user introduction disabled". but i want to have it! Also i see "Internal timing is disabled (option_internal_timing=0 chan->timingfd=16)". Is it related to my issue? |
| 10:33.22 | _Krieger_ | can it be that i`ve missed some dahdi configuration step? i`ve just made it, installed and modprobed (i have dahdi.ko, dahdi_dummy.ko and dahdi_transcode.ko loaded) |
| 10:35.27 | _Krieger_ | i have channel ctl pseudo timer transcode in /dev/dahdi. i run asterisk from root. |
| 10:35.47 | *** join/#asterisk lesouvage (n=root@cc341200-a.assen1.dr.home.nl) |
| 10:36.17 | lesouvage | . |
| 10:46.34 | *** join/#asterisk _mwoodj_ (n=mwoodj@pdpc/sponsor/digium/hyper-eye) |
| 10:48.58 | *** part/#asterisk Ericounet (n=Ericoune@ACaen-151-1-92-169.w86-215.abo.wanadoo.fr) |
| 10:54.22 | *** join/#asterisk Strom_C (n=strom@208.127.172.112) |
| 11:01.21 | *** join/#asterisk comfrey (n=comfrey@dsl-66-78-76-161.ipns.com) |
| 11:01.37 | comfrey | hey all... i am attempting to get my t1 up and running |
| 11:01.52 | comfrey | so... i am not sure of the signaling |
| 11:02.03 | comfrey | i selected T1 cpe |
| 11:02.09 | comfrey | but am unsure... |
| 11:02.26 | comfrey | also uncertain as to the diference between PRI and T1 |
| 11:02.33 | comfrey | 23 vs 24 chans |
| 11:02.39 | comfrey | all this shit. |
| 11:02.47 | comfrey | wanrouter this and that. |
| 11:02.55 | *** join/#asterisk i3inary (n=shaman@cpe-76-88-94-149.san.res.rr.com) |
| 11:02.57 | comfrey | anyone wants to lend a hand... |
| 11:03.07 | comfrey | i certainly appreciate |
| 11:06.44 | *** join/#asterisk suma (n=chinnapa@cpe-76-168-177-23.socal.res.rr.com) |
| 11:07.17 | suma | hey i'm trying to load the chan_gtalk.so module, it says file not found. but the file exists |
| 11:07.30 | suma | can someone help me how to recover from this error ? |
| 11:07.54 | suma | [Jan 22 02:05:38] WARNING[12629]: loader.c:360 load_dynamic_module: Error loading module 'chan_gtalk.so': File not found |
| 11:07.54 | suma | [Jan 22 02:05:38] WARNING[12629]: loader.c:637 load_resource: Module 'chan_gtalk.so' could not be loaded. |
| 11:07.59 | suma | this is what i get |
| 11:08.22 | Strom_C | comfrey: |
| 11:08.23 | Strom_C | ~101 |
| 11:08.24 | jbot | somebody said 101 was Telephony 101, which is a good read if you're unfamiliar with traditional TDM telephony. You can download it at http://www.stromcarlson.com/docs/basics/NTtelephony101.pdf |
| 11:09.17 | suma | Strom_C: is that is for me ? |
| 11:09.58 | comfrey | cheers Strom_C |
| 11:10.24 | Strom_C | suma: no, that was for comfrey...hence why I prefixed it with "comfrey" |
| 11:10.29 | *** join/#asterisk Koshatul (n=evangeli@ppp188-33.static.internode.on.net) |
| 11:10.37 | suma | np |
| 11:11.00 | suma | can someone help me with in loading the module please |
| 11:11.24 | suma | i have chan_gtalk in the same directory where other modules are also there |
| 11:11.55 | Strom_C | which directory is it in? |
| 11:12.21 | suma | in the directory /usr/lib/asterisk/modules |
| 11:13.17 | Strom_C | what does asterisk.conf say the proper modules directory is? |
| 11:14.04 | suma | same dir /usr/lib/asterisk/modules |
| 11:14.20 | suma | astmoddir |
| 11:14.25 | Strom_C | does the file have the proper permissions? |
| 11:14.53 | suma | rwxr_xr_x |
| 11:14.58 | suma | 755 |
| 11:15.01 | suma | yes |
| 11:15.26 | suma | it is the same permissions as with other modules |
| 11:15.32 | Strom_C | same owner also? |
| 11:15.35 | suma | yes |
| 11:15.46 | Strom_C | *shrug* I'm out of ideas |
| 11:15.47 | suma | there is only one owner in the system too, that is root |
| 11:17.40 | comfrey | ok... Strom_C , i am assuming my T1 is signaling of the type pri_cpe, but am unsure... can you tell me anything about common practice |
| 11:19.15 | Strom_C | comfrey: well, is it a PRI? |
| 11:19.19 | Strom_C | or is it a regular T1? |
| 11:19.36 | comfrey | i think i have 24 chans , but am uncertain |
| 11:19.48 | Strom_C | step 1: call your telephone company |
| 11:19.50 | comfrey | it was going into an adtran |
| 11:19.52 | comfrey | yeah |
| 11:19.54 | Strom_C | ask them "what the fuck do I have?" |
| 11:19.58 | comfrey | right |
| 11:19.59 | Strom_C | then you can continue |
| 11:20.01 | comfrey | k |
| 11:20.17 | comfrey | maybe they are still up |
| 11:22.49 | comfrey | drunk dials the phone co |
| 11:25.28 | comfrey | on phone with dude |
| 11:27.07 | comfrey | says custom t1 |
| 11:27.15 | comfrey | 22 chans voicee |
| 11:28.26 | comfrey | 2 chans unassigned |
| 11:34.10 | comfrey | thinks it is wink |
| 11:43.25 | comfrey | dude says call back during daylight |
| 11:43.30 | *** join/#asterisk Ericounet (n=Ericoune@ACaen-151-1-92-169.w86-215.abo.wanadoo.fr) |
| 11:43.32 | comfrey | go figure |
| 11:44.45 | *** join/#asterisk Danskmand (n=danskman@p4FD3DB49.dip.t-dialin.net) |
| 11:52.13 | *** join/#asterisk ltd (n=z@pat.transact.net.au) |
| 11:56.32 | Danskmand | Hi :-) - I have a installation of mISDN and Asterisk. I've read that there is no really good way to run a faxserver on this. But if there's no perfect, what is the "good" solution ? |
| 12:25.39 | *** join/#asterisk qdk (n=qdk@195.242.194.42) |
| 12:38.11 | *** join/#asterisk mikkel (n=mikkel@84-238-113-66.u.parknet.dk) |
| 12:50.54 | Madkiss | Danskmand: i'm just doing such a setup right now |
| 12:51.15 | Madkiss | Danskmand: faxdetect_context and faxdetect is what you are looking for I think |
| 12:52.33 | *** part/#asterisk lesouvage (n=root@cc341200-a.assen1.dr.home.nl) |
| 12:53.24 | Nasra | <PROTECTED> |
| 12:53.38 | *** join/#asterisk simNIX (n=simNIX@82-204-21-111.dsl.bbeyond.nl) |
| 12:54.53 | *** join/#asterisk gr0mit (n=tim@81.187.32.146) |
| 12:58.38 | *** join/#asterisk oej_ (n=olle@ns.webway.se) |
| 13:13.39 | *** join/#asterisk brad_mssw (n=brad@shop.monetra.com) |
| 13:17.02 | *** join/#asterisk jack_sparo (n=adeeb@dxb-b11275.alshamil.net.ae) |
| 13:17.14 | *** part/#asterisk jack_sparo (n=adeeb@dxb-b11275.alshamil.net.ae) |
| 13:21.31 | *** join/#asterisk Danskmand (n=danskman@p4FD3DB49.dip.t-dialin.net) |
| 13:24.22 | *** join/#asterisk freakazoid0223 (n=mattc@pool-72-81-6-216.phlapa.east.verizon.net) |
| 13:26.19 | *** join/#asterisk UnixDawg (n=UnixDawg@155.129.204.68.cfl.res.rr.com) |
| 13:33.57 | *** join/#asterisk RypPn (i=TuMbL@rosscom.demon.co.uk) |
| 13:42.50 | *** join/#asterisk nuck (n=nick@122.111.59.159) |
| 13:44.13 | nuck | I'm trying to set up a simple PBX with 2 SIP trunks - I can register with provider, but when dialling out I get "Unable to create channel of type '' (cause 66 - Channel not implemented) |
| 13:44.55 | tzafrir_laptop | nuck, maybe a dialplan issue? pastebin your extensions.conf and a trace from the CLI |
| 13:45.06 | tzafrir_laptop | before that, try: core set verbose 3 |
| 13:46.07 | *** join/#asterisk LiNeTuX_Home (n=LiNeTuX@253.238.95.24.cfl.res.rr.com) |
| 13:47.04 | *** join/#asterisk sack (n=sack@106.Red-88-24-156.staticIP.rima-tde.net) |
| 13:47.39 | nuck | One wierd thing I've noticed: WARNING[5122] pbx_config.c: Unable to include context 'default' in context 'DID_engin_36_out' |
| 13:48.06 | nuck | (I've just installed the latest AsteriskNOW and am using the GUI) |
| 13:53.53 | *** join/#asterisk hawk (n=hawk@pdpc/supporter/active/hawk) |
| 13:54.14 | nuck | Aw man, that GUI's wacked! |
| 13:55.31 | nuck | what's dundi-e164? |
| 13:55.37 | hawk | I have a problem where app_amd never seems to return, it just blocks forever (or until hangup) after the AMD call in the dial plan. Any ideas? (The parameter values it prints in the console look sensible) |
| 13:56.38 | hawk | Well, the chan->cid.cid_ani and chan->cid.cid_rdnis are printed as "(null)" in the debug output, I don't know if that would cause a problem. |
| 14:04.47 | *** join/#asterisk _ShrikE (n=_ShrikE@adsl-074-185-215-060.sip.msy.bellsouth.net) |
| 14:10.09 | Madkiss | wooohooo, the chan_mISDN-thing works! |
| 14:10.53 | LiNeTuX_Home | nuck: e164: -> http://www.enum.org/faq.html |
| 14:21.16 | Madkiss | what is wrong if my snom 320 suddenly refuses to load its configuration via tftp? not really asterisk-related, i know, i just stubmled over that issue while testing my ' |
| 14:22.00 | UnixDawg | restart it and check your network |
| 14:22.14 | UnixDawg | sounds like the tftp server is rejecting connections |
| 14:22.21 | UnixDawg | try moving to ftp |
| 14:22.29 | UnixDawg | its more secure and stable |
| 14:27.51 | Madkiss | UnixDawg: it rather looks like the phone does not even try to load the configuration file |
| 14:28.38 | WimpMan | Madkiss: Stop reminding me of things I have to do right after having woken up. |
| 14:28.44 | Madkiss | it tells me "Check Update", then "Snom320 6.something.something" and that's it |
| 14:28.48 | Madkiss | WimpMan: oh sorry ;) |
| 14:33.24 | Madkiss | gosh, now what is this. |
| 14:33.49 | UnixDawg | hmm check for typos in the file |
| 14:34.24 | *** join/#asterisk colulu (n=colulu@61.141.158.178) |
| 14:35.14 | Madkiss | err. goddammit. stupid me. |
| 14:36.53 | [gnubie] | hello all.. |
| 14:38.45 | [gnubie] | does DUNDi answers the problem of disconnecting the current call session when asterisk crashes or the server goes down? |
| 14:39.40 | WimpMan | No. It only lets you locate a user. |
| 14:40.35 | [gnubie] | WimpMan: i see.. because i've been reading the docs at the voip-info website and it doesn't say about the current call session |
| 14:41.03 | [gnubie] | WimpMan: any idea of a possible solution for this kind of problem? |
| 14:41.30 | UnixDawg | Madkiss, ? |
| 14:41.36 | WimpMan | Get the peers to talk directly to each other. |
| 14:41.42 | *** join/#asterisk Danskmand (n=danskman@p4FD3DB49.dip.t-dialin.net) |
| 14:42.11 | colulu | Hi, I am trying to get 2 asterisks to hook up with E1 |
| 14:42.24 | WimpMan | Err. Am I (or my config file) missing something or is mISDN debugging only available in NT mode??? |
| 14:42.27 | colulu | I am getting 31 channels to configure. |
| 14:42.38 | colulu | I have been stuck on this for a few days |
| 14:42.59 | colulu | does anyone know how to resolve it? No matter what I do I can't seem to configure those 31 channesl |
| 14:43.13 | [gnubie] | WimpMan: what do you mean? say, an extension softphone calls an analog telephone via pots_pstn and currently in a call session and suddenly, asterisk crashes.. any solution to that one? |
| 14:44.14 | WimpMan | [gnubie]: Well if the part driving an interface crashes there is no possible solution. (Other than fixing it, off course) |
| 14:45.35 | Madkiss | well this is strange. I can dial in perfectly via PSTN, but I can not call out. the thing says: [Oct 5 16:43:23] WARNING[7266]: chan_misdn.c:3235 misdn_request: Could not Dial out on group 'external'. -- and restarting the ports does not work |
| 14:45.38 | [gnubie] | is stuck on the one way audio problem and choppy to no sound at all on iax2 trunking when "encryption=yes" is set |
| 14:47.31 | WimpMan | Madkiss: What does misdn show stacks say? |
| 14:47.43 | *** join/#asterisk fordfrog (n=fordfrog@gentoo/developer/fordfrog) |
| 14:48.15 | colulu | could someone help me with "31 channels to configure" issue? |
| 14:50.48 | Madkiss | WimpMan: well, it shows three ports that are up |
| 14:51.31 | WimpMan | up/up? |
| 14:51.44 | Madkiss | yes |
| 14:51.55 | WimpMan | ok |
| 14:54.59 | WimpMan | can remember having hat troubles using groups, but I haven't got anything with more than one TE port running. |
| 14:55.12 | *** join/#asterisk bbryant (n=brett@c-68-59-20-153.hsd1.sc.comcast.net) |
| 15:00.36 | Madkiss | http://bugs.digium.com/view.php?id=9449 -- hm |
| 15:01.51 | *** join/#asterisk nuck (n=nick@122.111.59.159) |
| 15:02.12 | nuck | Could somebody please take a look at this and help me make incoming and/or outgoing calls? |
| 15:02.13 | nuck | http://pastebin.com/d355115e7 |
| 15:02.57 | WimpMan | Madkiss: But your ports ar up/up, not down/up. aren't they? Well, maybe the whole group thing is broken? |
| 15:06.14 | Madkiss | P[ 0] Port is not configured (0) |
| 15:10.46 | Madkiss | i mean. |
| 15:10.56 | Madkiss | how can it say that the port is not configured when it actually is? |
| 15:11.32 | Madkiss | Oct 5 16:35:53 call asterisk[6326]: rc_avpair_new: unknown attribute 1490026597 |
| 15:11.35 | Madkiss | err |
| 15:12.34 | Madkiss | why does the thing believe there is a port 0? |
| 15:14.05 | colulu | I am getting [Oct 5 23:12:54] ERROR[14515]: chan_zap.c:10949 process_zap: Unknown signalling method 'ss7' |
| 15:14.05 | colulu | <PROTECTED> |
| 15:14.07 | colulu | does anyone know why? |
| 15:14.09 | WimpMan | Isn't port 0 the list of ports or just the general channel? |
| 15:14.44 | Madkiss | WimpMan: i have no idea :( |
| 15:16.26 | WimpMan | I think I'd do it myself in the dialplan. |
| 15:16.45 | *** join/#asterisk ManxPower (n=manxpowe@244.sub-75-249-101.myvzw.com) |
| 15:16.47 | Madkiss | how? |
| 15:17.26 | WimpMan | Dial out on the first port and if dialstatus=chanunavail try the next. |
| 15:19.58 | *** join/#asterisk fordfrog (n=fordfrog@gentoo/developer/fordfrog) |
| 15:20.06 | Madkiss | WimpMan: well, there is no port 0 configured anywhere |
| 15:20.33 | nuck | Here (http://pastebin.com/d3d29e280) is the debug output for my config (http://pastebin.com/d355115e7) |
| 15:21.00 | WimpMan | As I said, I think the debug output uses port 0 for any messages not specific to a particular port. |
| 15:21.30 | nuck | What does CHANUNAVAIL mean? Why am i going there? |
| 15:22.04 | shriven | I believe it means channel unavailable |
| 15:22.27 | *** join/#asterisk fakhir (n=fakhir@unaffiliated/fakhir) |
| 15:22.34 | nuck | obviously - but what does it mean is wrong with my config that I am going there? |
| 15:23.11 | shriven | which line of your config is that in? |
| 15:23.14 | colulu | could somone help me with ss7 set? |
| 15:24.00 | tzafrir_laptop | colulu, chan_zap does not support "ss7". You probably need a newer version (that is probably called "chan_dahdi") |
| 15:24.40 | ManxPower | nuck: CHANUNAVAIL can be caused by MANY things. |
| 15:24.48 | Madkiss | WimpMan: and dialing out on one port directly results in the same message |
| 15:25.09 | WimpMan | Madkiss: Ok, that's bad. |
| 15:25.48 | Madkiss | you can say that again |
| 15:25.55 | shriven | nuck: according to the debug it's happening in the [macro-trunkdial] context at priority 3 |
| 15:25.59 | shriven | which is this: exten = s,n,Goto(s-${DIALSTATUS},1) |
| 15:25.59 | WimpMan | Madkiss: I guess it's time for some pastebinning. |
| 15:26.30 | shriven | the Goto command tells * to jump to one or the other of those options |
| 15:26.50 | Madkiss | WimpMan: wait a second. i will try something else. |
| 15:26.53 | shriven | I'm a bit new at this, but I don't see either of those priority labels or priority names anywhere |
| 15:27.25 | shriven | nuck, read the book about asterisk, there is a section about Goto that explains this nicely |
| 15:27.26 | shriven | ~book |
| 15:27.27 | jbot | i heard book is Asterisk: The Future of Telephony 2nd Edition (ISBN 0-596-51048-9) --- Order yours at http://www.oreilly.com/catalog/9780596510480/ --- Free downloadable PDF http://downloads.oreilly.com/books/9780596510480.pdf --- HTML at http://tfot.leifmadsen.com or see ~buybook |
| 15:27.43 | shriven | the .pdf is free |
| 15:28.54 | colulu | i thought chan_zap support ss7 via zaptel |
| 15:29.12 | colulu | tazfrir_laptop: doesn't chan_zap supports ss7 via zaptel? |
| 15:29.23 | colulu | atazfrir_laptop: and libss7? |
| 15:29.47 | ManxPower | colulu: There is a THIRD PARTY SS7 thing that can work with zaptel, but if you want the official ss7 support you'll have to use DHADI |
| 15:31.18 | colulu | ManxPower: I have a winpipe driver which seems to only work with zaptel instead of DHADI |
| 15:31.39 | colulu | ManxPower: I tried following the procedure in http://www.venturevoip.com/news.php?rssid=1843 |
| 15:31.43 | shriven | nuck: looks like Goto() is explained on page 129... I hope that is helpful. : ( |
| 15:31.45 | colulu | MaxPower: but no success |
| 15:32.14 | Madkiss | WimpMan: okay, so what do you want to see? |
| 15:32.19 | ManxPower | colulu: I did not say I was going to help you with ss7, I only told you what you need for official ss7 support |
| 15:33.31 | ManxPower | colulu: that document is dated 13 months ago. |
| 15:36.05 | Madkiss | ManxPower: wou wou wou, wait. dialing out via a port directly just works like a charm. |
| 15:40.17 | *** join/#asterisk kamanashisroy (n=kamanash@119.30.34.4) |
| 15:42.56 | *** join/#asterisk [TK]D-Fender (n=chatzill@64.235.218.194) |
| 15:47.59 | Danskmand | Madkiss: Nachricht für dich... |
| 15:48.56 | ManxPower | What is a "wou"? |
| 15:52.09 | *** join/#asterisk Danskmand (n=danskman@p4FD3DB49.dip.t-dialin.net) |
| 15:54.12 | *** join/#asterisk Danskmand (n=danskman@p4FD3DB49.dip.t-dialin.net) |
| 15:57.05 | Madkiss | Danskmand: oh, sorry |
| 15:57.19 | Madkiss | WimpMan: got it |
| 15:57.23 | colulu | tazfrir_laptop: you checked in something about sangoma and DAHDI, is it something that I can use? |
| 15:58.39 | Qwell | colulu: he commits lots of zaptel/dahdi stuff |
| 15:59.21 | ManxPower | colulu: Sangoma is good about releasing updated drivers as zaptel is updated. Since DAHDI has had it's first release recently, Sangoma should be releasing something compatible with DAHDI soon. |
| 15:59.45 | Qwell | ManxPower: To be fair, they've known about it for quite a while now |
| 16:00.00 | colulu | yeah, it has been a while |
| 16:00.09 | colulu | I doubt if they would ever do that |
| 16:00.24 | ManxPower | colulu: DHADI was released officially 2 days ago..... |
| 16:00.36 | Qwell | it's been in rc for months. |
| 16:00.39 | colulu | DHADI has been a while |
| 16:00.43 | ManxPower | sorry, 3 days ago. |
| 16:00.52 | *** join/#asterisk emist (n=emist@unaffiliated/emist) |
| 16:01.13 | *** join/#asterisk mvanbaak (n=michiel@asterisk/contributor-and-bug-marshal/mvanbaak) |
| 16:01.29 | ManxPower | Qwell: that is true. If Sangoma does not update it's drivers they will lose lots of sales. |
| 16:01.58 | Madkiss | has somebody played with ISDN call deflection? |
| 16:02.25 | Madkiss | misdn_facility(calldeflect|12345) throws no error, but the call never arrives at 12345 |
| 16:03.02 | WimpMan | Madkiss: Yes, but not under * so far. |
| 16:03.19 | WimpMan | Used I4L for that. |
| 16:03.50 | ManxPower | Madkiss: BRIstuff is the only thing I am aware of that has call deflection that works with Asterisk. |
| 16:04.18 | Madkiss | the asterisk-patch you mean? |
| 16:04.20 | shriven | Hello, I'm hoping someone can help me figure this app_voicemail issue out. I'm using imap but it doesn't want to authenticate properly. I get this in the * console. http://pastebin.com/d288c2779 and this on the imap server mail.info log: http://pastebin.com/d317386ef |
| 16:05.55 | seanbright | cyrus imapd? |
| 16:06.35 | shriven | oh hi seanbright. |
| 16:06.40 | shriven | this is shrift ;) |
| 16:06.46 | shriven | thanks for your help lately |
| 16:06.47 | ManxPower | "authuser=vmail" I assume you are using one login for access to all mailboxes? |
| 16:06.48 | shriven | ummm |
| 16:06.55 | shriven | the imap server is courier, is that what you're asking? |
| 16:07.04 | seanbright | it is, yes. |
| 16:07.20 | shriven | yeah, it seems very odd to me that the first command it's issueing is LOGOUT |
| 16:08.11 | sfire | maybe there is nothing to deliver? |
| 16:08.35 | ManxPower | shriven: It seems odd to me too. |
| 16:08.52 | seanbright | shriven: pastebin your voicemail.conf |
| 16:08.55 | shriven | well, there isn't anything to deliver. this is simply when I do a "voicemail show users" it's just doing a preauth |
| 16:08.57 | shriven | ok |
| 16:09.45 | ManxPower | shriven: is more shown in the mail log when users log in with their local imap client? |
| 16:09.49 | ManxPower | (non-asterisk) |
| 16:10.07 | shriven | manxpower: yes successful imap logins are more verbose |
| 16:10.43 | ManxPower | shriven: are YOU able to log into the IMAP server with the same username/password as Asterisk is using? |
| 16:10.50 | shriven | yup |
| 16:10.54 | shriven | tried it several times |
| 16:11.10 | shriven | ok voicemail.conf: http://pastebin.com/d34c8bb6f |
| 16:11.27 | ManxPower | shriven: you checked the asterisk asterisk/doc directory for any notes on VM on IMAP? |
| 16:11.47 | shriven | oh, as long as you're all oggling that, does the mp3 line actually work? I had no idea thought I'd find out by trial and mostly error.... but ive' never gotten that far. |
| 16:12.13 | ManxPower | shriven: I HIGHLY recommend you use a format other than mp3 |
| 16:12.13 | shriven | manxpower: yes I have scoured all docs I can find, this seems to be a correct setup for imap users |
| 16:12.36 | shriven | vorbis is a possibility, I just wanted it something small due to it being in users's imap folders |
| 16:12.57 | ManxPower | I suggest WAV49 the files are as small as GSM, but they will play on a Windows box without having to install software, |
| 16:13.07 | shriven | how about mac? |
| 16:13.16 | shriven | all my users will be using apple's Mail.app |
| 16:13.26 | ManxPower | a mac might be able to play GSM format files without software, I don't know. |
| 16:13.35 | shriven | cool thanks |
| 16:13.40 | ManxPower | try WAV49 if it works on MAC...... |
| 16:13.48 | ManxPower | do NOT assume asterisk supports all formats. |
| 16:13.48 | shriven | ok |
| 16:13.55 | shriven | seanbright: any thoughts on that config? |
| 16:14.35 | seanbright | it's a lovely config... |
| 16:14.44 | seanbright | as to why it's not working... |
| 16:14.47 | seanbright | shrugs |
| 16:15.06 | ManxPower | shriven: what version of Asterisk are you using? |
| 16:15.06 | shriven | : ( |
| 16:15.13 | shriven | 1.6.0 rc6 |
| 16:15.21 | shriven | checked out from svn sometime last night |
| 16:15.40 | shriven | is there any way to look at what command sequence the imap client send? |
| 16:15.42 | seanbright | rc6? |
| 16:15.46 | seanbright | why not just use the release? |
| 16:15.46 | shriven | eh |
| 16:16.01 | shriven | umm maybe I'm not specifying my version right. |
| 16:16.03 | shriven | I'm using svn |
| 16:16.07 | *** join/#asterisk drako (n=ljd@nelug/coreteam/luisjose) |
| 16:16.31 | shriven | umm by release do you mean 1.4.22..... ? |
| 16:16.34 | Qwell | what exactly did you check out? |
| 16:16.40 | seanbright | shriven: no, i mean 1.6.0 |
| 16:16.59 | shriven | I was under the impression that 1.6.0 hadn't been released? it was release candidates |
| 16:17.00 | seanbright | svn co http://svn.digium.com/svn/asterisk/tags/1.6.0/ |
| 16:17.04 | shriven | ah yes |
| 16:17.05 | seanbright | it's been released. |
| 16:17.10 | seanbright | a few days ago |
| 16:17.19 | shriven | interesting |
| 16:17.24 | seanbright | that is most certainly not what is causing your problem |
| 16:17.28 | shriven | well at any rate, I got svn |
| 16:17.33 | seanbright | heh |
| 16:17.36 | shriven | Qwell: not sure it was last night. |
| 16:17.46 | Qwell | what was the exact command you used? |
| 16:17.54 | shriven | getting it now |
| 16:18.01 | shriven | svn co http://svn.digium.com/svn/asterisk/branches/1.6.0 asterisk |
| 16:18.05 | seanbright | ok |
| 16:18.13 | ManxPower | I assume libpri 1.4.x is good for asterisk 1.6.x? |
| 16:18.17 | seanbright | ManxPower: yes |
| 16:18.48 | seanbright | assuming that libpri 1.4.x is compatible with dahdi 2.0.0 :) |
| 16:19.01 | Qwell | libpri doesn't use dahdi |
| 16:19.08 | seanbright | that's what i said |
| 16:19.11 | seanbright | runs off |
| 16:19.19 | seanbright | heh |
| 16:19.25 | seanbright | dahdi uses libpri doesn't it? |
| 16:19.38 | tzafrir_laptop | libpri 1.4.x is not meaningful enough |
| 16:19.40 | Qwell | no |
| 16:19.42 | seanbright | wow |
| 16:19.49 | seanbright | well color me corrected |
| 16:20.03 | tzafrir_laptop | libpri 1.4.x for x <= 3 is compatible with libpri 1.2 |
| 16:20.33 | ManxPower | then 1.4.7 should work just fine with asterisk 1.6.x |
| 16:20.47 | tzafrir_laptop | for x >= 4 it added some newer features and got a new soname |
| 16:21.18 | tzafrir_laptop | ManxPower, I suspect even libpri 1.2 should work fine with asterisk 1.6 but I never tested that |
| 16:21.45 | shriven | Umm so, do I have the released version of 1.6.0? |
| 16:21.52 | Qwell | shriven: no |
| 16:21.55 | tzafrir_laptop | But maybe 1.6.0 does test for some newer features of libpri |
| 16:22.07 | shriven | Qwell ok if I use the /tags/1.6.0 I will? |
| 16:22.12 | Qwell | yes |
| 16:22.18 | shriven | I'll give that a try. |
| 16:22.19 | shriven | thanks |
| 16:22.27 | seanbright | well, wait... |
| 16:22.33 | shriven | oh? |
| 16:23.02 | seanbright | nevermind, you're good. |
| 16:23.11 | Qwell | don't confuse him :p |
| 16:23.14 | shriven | good if I use /tags? |
| 16:23.16 | shriven | lol |
| 16:23.18 | shriven | yes |
| 16:23.22 | shriven | don't confuse me ;) |
| 16:23.32 | seanbright | yes, use /tags |
| 16:23.41 | shriven | ok |
| 16:23.55 | ManxPower | Since 1.6.x has been released I took my old Asterisk server out of the attic and am trying 1.6.x on it. |
| 16:24.45 | coppice | can you see Narnia when you remove the side panel? |
| 16:26.16 | *** join/#asterisk oilinki7 (n=oil@ppp-124-120-19-31.revip2.asianet.co.th) |
| 16:27.26 | ManxPower | coppice: you'd be surprised at what I see. |
| 16:30.03 | *** join/#asterisk Carlos_PHX (n=Carlos@3.sub-70-210-205.myvzw.com) |
| 16:31.14 | *** join/#asterisk moy (n=moy@189.169.68.109) |
| 16:32.52 | *** join/#asterisk whymarkwh (n=dsfsdfsd@196.211.34.2) |
| 16:33.14 | *** join/#asterisk emist (n=emist@unaffiliated/emist) |
| 16:33.16 | hawk | for the record: upgrading to latest version + http://forums.digium.com/viewtopic.php?p=74250 solved my problem |
| 16:34.45 | whymarkwh | hi there i have a grandsteam ata but can not transfer using the # key to another extension(using a siemens cordless A140s) a normal analog handset works, any tips welcome |
| 16:35.25 | *** join/#asterisk mvanbaak_ (n=michiel@asterisk/contributor-and-bug-marshal/mvanbaak) |
| 16:38.17 | *** join/#asterisk outtolunc (n=me@c-24-130-75-122.hsd1.ca.comcast.net) |
| 16:39.41 | *** join/#asterisk stencil (n=stencil@pdpc/supporter/student/stencil) |
| 16:41.04 | Madkiss | WimpMan: false alarm, it doesn*t work. |
| 16:41.36 | Madkiss | the group-calling is still broken, it claims that it can not find any active channels, although they are all Up:Up |
| 16:41.45 | Madkiss | and calling via ports directly works absolutely nice. |
| 16:43.16 | Madkiss | is there some function to test whether a port is available? |
| 16:45.33 | ManxPower | Madkiss: Pastebin your /etc/zaptel.conf |
| 16:49.02 | tzafrir_laptop | and also: cat /proc/zaptel/* |
| 16:52.58 | ManxPower | dies of old age waiting |
| 16:53.11 | Madkiss | who said something of zaptel? |
| 16:53.53 | Madkiss | this is a beronet hfcmulti eight port card. |
| 16:54.06 | Madkiss | driven with mISDN and hfcmulti |
| 16:54.26 | ManxPower | You poor sod. |
| 16:55.04 | Madkiss | i agree. |
| 16:55.13 | ManxPower | Not all that many people here use BRI. Best of luck solving your problem. |
| 16:56.46 | stencil | Would it be true to say that FreeBSD is the OS of choice for Asterisk developers? |
| 16:57.25 | jaytee | I doubt it |
| 16:58.02 | stencil | jaytee: what would it be then? |
| 16:58.15 | mchou | lol |
| 16:58.19 | jaytee | whatever distro you're comfortable with |
| 16:58.48 | sfire | ubuntu is nice (IMHO) |
| 17:00.37 | *** join/#asterisk emist (n=emist@unaffiliated/emist) |
| 17:00.51 | Madkiss | is there a macro or a function that checks whether a port is available fora call? "mISDN/1/12345" works nicely, so I guess I could kind of re-build the group-stuff in dialplan. But I would need to be able to test whether mISDN/1 can take a call. |
| 17:02.01 | tzafrir_laptop | stencil, it would be quite false |
| 17:02.11 | ManxPower | stencil: Asterisk is written and developed on Linux. |
| 17:02.20 | jaytee | how about ChanIsAvail()? would that work for ya? |
| 17:02.43 | Madkiss | I would need to test. |
| 17:03.17 | ManxPower | Madkiss: or you could search the web. You are not the only person that uses mISDN with Asterisk. |
| 17:03.22 | stencil | ManxPower: ok I understand, what is the distro of choice? |
| 17:03.42 | ManxPower | stencil: The best linux distro for Asterisk is the one you know best. |
| 17:03.50 | stencil | ok |
| 17:03.57 | ManxPower | But you should know some linux nefore trying to install Asterisk. |
| 17:05.45 | Madkiss | ManxPower: right, not like i had not searched google dozens and dozens of times within the last days |
| 17:09.11 | ManxPower | http://www.voip-info.org/wiki/view/Asterisk+Documentation+1.4+misdn.txt |
| 17:09.42 | *** join/#asterisk atis_work (n=atis_wor@193.238.212.171) |
| 17:09.55 | ManxPower | If that's not helpful you might want to post to an mISDN mailing list or asterisk-users mailing list |
| 17:10.02 | ManxPower | ~mailinglist |
| 17:10.03 | jbot | [~mailinglist] The Asterisk mailing lists can be found at http://lists.digium.com , http://www.asteriskguru.com/archives Search the archives by adding "site:lists.digium.com" to your Google search. |
| 17:12.26 | tzafrir_laptop | stencil, there are even some strange folks who run Asterisk on FreeBSD |
| 17:12.56 | *** join/#asterisk cesar_CR (n=cesar@celord.ice.co.cr) |
| 17:12.58 | ManxPower | Those people are just too weird. 8-) |
| 17:13.11 | jaytee | or the WRT54G |
| 17:13.23 | whymarkwh | hi there i have a sangoma fxs extension on my asterisk box(6008) if i want to dial i see that it is cutting of digits when i look in the CLI> any tips welcom |
| 17:14.29 | ManxPower | and maybe this: http://www.asterisk.org/doxygen/trunk/Config_misdn.html |
| 17:14.41 | tzafrir_laptop | first off, it is just a zap fxs extension for asterisk |
| 17:15.46 | hardwire | hi |
| 17:16.18 | whymarkwh | i know if i press 6000 it does not break dialtone |
| 17:16.38 | ManxPower | whymarkwh: then you have something very, very, very wrong |
| 17:17.26 | tzafrir_laptop | can you pastebin the relevant dialplan? |
| 17:17.26 | whymarkwh | if i press 6000 is shows that a pressed 000 in dialplan |
| 17:17.38 | hardwire | cleans his mouse ball |
| 17:17.49 | ManxPower | whymarkwh: have you tried a different phone? |
| 17:18.02 | tzafrir_laptop | whymarkwh, you can enable dtmf digits logging in logger.conf |
| 17:18.16 | tzafrir_laptop | be sure to also enable "debug" logging |
| 17:18.33 | tzafrir_laptop | this will show you what digits you pressed |
| 17:18.55 | tzafrir_laptop | or rather: what digits were actually detected |
| 17:22.40 | hardwire | sigh.. how can ideas as simple as HUD make soooo much money? |
| 17:22.44 | hardwire | it freaks me out |
| 17:22.54 | whymarkwh | yes i have tried various phones |
| 17:23.55 | *** join/#asterisk emist (n=emist@unaffiliated/emist) |
| 17:25.00 | tzafrir_laptop | you tried and, what digits does asterisk actually get? |
| 17:25.42 | hardwire | needs a longer cable |
| 17:26.06 | whymarkwh | if i dial 6000 it picks up 000 |
| 17:26.30 | *** join/#asterisk implicit (n=bayan@unaffiliated/implicit) |
| 17:31.52 | whymarkwh | if i want to force a call to go faster of a fxs extension(sangoma card) like dialing 6000,1,Dial(SIP/6000,20,tT) on the fxs extensions there is a wait before it dials the number , if this make sence i want to force the call to dial faster, how do i accomplish this? |
| 17:34.55 | *** join/#asterisk kfb (n=kfb@c-76-116-240-157.hsd1.pa.comcast.net) |
| 17:39.53 | Madkiss | is CALLERIDNUM an asterisk-wide variable that should always contain the number of the caller? |
| 17:40.26 | tzafrir_laptop | whymarkwh, then there seems to be a problem with dtmf detection somewhere along the way |
| 17:40.32 | tzafrir_laptop | or with dialing |
| 17:40.32 | WimpMan | It used to be. |
| 17:40.39 | WimpMan | Use CALLERID(num) nuw. |
| 17:41.16 | tzafrir_laptop | you can record the audio that asterisk got with ztmonitor |
| 17:41.31 | tzafrir_laptop | to see if those are indeed valid tones |
| 17:42.10 | whymarkwh | k i will go and read up some on sangoma dtmf |
| 17:42.29 | Madkiss | WimpMan: num or number? |
| 17:42.53 | tzafrir_laptop | whymarkwh, what version of asterisk is it? |
| 17:42.58 | WimpMan | AFAIR it's both valid. |
| 17:44.35 | *** join/#asterisk emist (n=emist@unaffiliated/emist) |
| 17:45.30 | *** join/#asterisk logicwrath (n=no@c-68-42-253-39.hsd1.mi.comcast.net) |
| 17:45.38 | Madkiss | WimpMan: thank you so much sir :) |
| 17:45.55 | whymarkwh | 1.4 |
| 17:52.48 | whymarkwh | problem solved just added relaxdtmf=yes to all fxs channels no works like a charm, thanks for the tips |
| 17:56.22 | Danskmand | Madkiss: Do you think you will have time today for my prblem ? |
| 18:12.39 | *** join/#asterisk Compy (n=compy@h155.214.18.98.dynamic.ip.windstream.net) |
| 18:18.34 | Danskmand | Bin ich noch online ? - Kommt mir so ruhig vor hier.... |
| 18:19.06 | *** join/#asterisk riddlebox (n=james@75-132-225-75.dhcp.stls.mo.charter.com) |
| 18:21.55 | *** join/#asterisk lesouvage (n=lesouvag@cc341200-a.assen1.dr.home.nl) |
| 18:24.01 | hardwire | how do you guys feel about the X3220 Xeon? |
| 18:26.38 | *** join/#asterisk patrickod (n=patrick@87.192.246.254) |
| 18:27.13 | patrickod | is anyone active here? I'm having an extensions problem with my asterisk install |
| 18:27.32 | patrickod | none of the extensions seem to work even though I am pretty confident the extensions.conf file is being loaded |
| 18:27.48 | patrickod | when I put in an error deliberately it shows a warning |
| 18:27.56 | lesouvage | patrickod: can you place it on pastebin somewhere |
| 18:28.00 | patrickod | but none of the extensions work, not even the demo's |
| 18:28.04 | patrickod | lesouvage: will do |
| 18:29.34 | patrickod | http://www.stikked.com/view/52932464 |
| 18:29.47 | lesouvage | What does asterisk -rx "show dialplan"|more from the linux prompt show you. Do you recognize your extensions? |
| 18:29.59 | patrickod | one sec |
| 18:30.06 | patrickod | I think I pasted the wrong config |
| 18:30.16 | patrickod | I tried cutting it down to just my extenions and the general section |
| 18:30.18 | patrickod | one sec |
| 18:30.51 | patrickod | lesouvage: it shows my extensions |
| 18:30.55 | patrickod | but the don't seem to work |
| 18:31.12 | jaytee | can you pastebin a failed call from the CLI |
| 18:31.26 | patrickod | http://www.stikked.com/view/96893068 |
| 18:31.30 | patrickod | ok |
| 18:31.38 | patrickod | thats the output from the command you gave |
| 18:32.48 | patrickod | http://www.stikked.com/view/66313514 |
| 18:32.53 | patrickod | thats the cli output |
| 18:33.18 | jaytee | pastebin your sip.conf please |
| 18:33.29 | patrickod | ok |
| 18:34.08 | patrickod | http://www.stikked.com/view/79486779 |
| 18:34.19 | patrickod | I have to go for about 20 mins, sorry |
| 18:34.28 | patrickod | hope thats enough for you guys |
| 18:34.32 | patrickod | I appreciate the help |
| 18:34.33 | patrickod | thanks |
| 18:35.04 | jaytee | patrickod, change the context= to home in your sip.conf instead of idefisk_tests |
| 18:35.11 | jaytee | then reload and test again |
| 18:39.07 | *** join/#asterisk mog (n=mog@c-68-62-219-86.hsd1.al.comcast.net) |
| 18:39.07 | *** mode/#asterisk [+o mog] by ChanServ |
| 18:43.02 | jaytee | hardwire, haven't tried * on an X3220 but it sure runs sweet on an E5405 |
| 18:43.40 | hardwire | I can't afford 5xxx series yet |
| 18:43.57 | hardwire | it seems like xeons and pentiums are very closely related nowadays |
| 18:45.11 | jaytee | well, based on the specs the x3220 should do fine. It doesn't have the cache size the 5405 has but unless you're pushing a huge load on it I imagine it can handle most moderate sized environments |
| 18:48.32 | hardwire | jaytee: the x3220 should be fine for what I need.. 2 PRI worth of calls and transcoding |
| 18:49.42 | *** join/#asterisk angryuser (n=Miranda@236.202.141.79.dynamic.adsl.abo.nordnet.fr) |
| 18:50.03 | angryuser | can someone explain me why is this happening ? WARNING[7782]: translate.c:175 framein: no samples for ulawtolin |
| 18:50.46 | jaytee | I'm running 2 T1's configured as PRI and but I have minimal transcoding as I use uLaw mostly and the E5405 never breaks a sweat. Most concurrent calls I've had though are 34 |
| 18:51.10 | *** join/#asterisk afink_ (n=chatzill@ip68-13-89-102.om.om.cox.net) |
| 18:55.30 | *** join/#asterisk beek (n=klinebl@65.211.106.242) |
| 18:55.34 | hardwire | jaytee: I don't know the differences between the 3xxx and 5xxx series that has anything to do with linux or asterisks capabilities |
| 18:55.37 | comfrey | k |
| 18:55.43 | hardwire | and I'm very VERY confused about the AMD line |
| 19:00.06 | jaytee | angryuser, based on what you posted I'd say * is having a tough time translating between ulaw to lin. do you have codec_ulaw.so loaded when you do a show modules like codec_ulaw? |
| 19:01.06 | tvirus | We have a TDM410P and after about an hour it stops working, we only get 1-way audio. Anyone that calls to the TDM card cannot interact with the IVR and we can't hear them. This has been an issue that's been bothering us for a few days now. 2x FXO 2x FXS and the EC |
| 19:01.20 | angryuser | jaytee : codec_ulaw.so loaded |
| 19:01.42 | jaytee | hardwire, I'm not gonna get into a debate of Intel vs. AMD. I know alot of people run * on AMD systems just fine with no problems. I just feel more comfortable with Intel on a server. personal bias, nothing more. |
| 19:02.27 | jaytee | angryuser, and what exactly are you trying to do when you get that message? |
| 19:03.15 | angryuser | jaytee i have a call from PAP2T to outgoing provider, both use ulaw |
| 19:03.46 | angryuser | jaytee : ah, wait one use ulaw another alaw .... |
| 19:03.59 | jaytee | angryuser, are you in the US? |
| 19:04.14 | seanbright | the greatest country in the world? |
| 19:04.17 | seanbright | heh. |
| 19:04.29 | angryuser | jaytee : strange, il try to fix that |
| 19:05.10 | *** join/#asterisk esaym (n=user@cpe-70-120-89-6.satx.res.rr.com) |
| 19:05.12 | jaytee | angryuser, if you're in the US you don't need or want alaw except possibly for overseas calls over the intertubes |
| 19:08.05 | *** join/#asterisk atis_work (n=atis_wor@193.238.212.171) |
| 19:10.38 | *** join/#asterisk mazpe (n=mazpe@dynamic37-175.MAN-PI.cablenet.com.ni) |
| 19:11.01 | Madkiss | ha, i fought mISDN. i am teh rock. |
| 19:11.34 | WimpMan | Madkiss: What did you do to it? |
| 19:11.37 | angryuser | i have a strange zombie call, how can i hangup it from console ? xx.XX.XX.XX N95 ce9fbcdf-ad 00101/04712 0x4 (ulaw) No Rx: INVITE , nobody is calling, but it's in console |
| 19:11.41 | jaytee | usually it's about 30 minutes to an hour after they start bragging that the server crashes |
| 19:11.48 | angryuser | Madkiss : so without capi it's fine ? |
| 19:12.04 | *** join/#asterisk Corydon76-dig (i=seven@pdpc/supporter/bronze/Corydon76-home) |
| 19:12.04 | *** mode/#asterisk [+o Corydon76-dig] by ChanServ |
| 19:13.31 | Madkiss | angryuser: it works now. |
| 19:13.38 | Madkiss | WimpMan: well, i fixed a whole lot of typos |
| 19:13.49 | Madkiss | WimpMan: and i did some code debugging and it's working now the way i want it to. |
| 19:13.51 | WimpMan | Typos? |
| 19:14.33 | *** join/#asterisk UnixDawg (n=UnixDawg@155.129.204.68.cfl.res.rr.com) |
| 19:14.47 | WimpMan | has just discovered mISDNdebugtool - That's what I wanted. |
| 19:15.07 | Madkiss | WimpMan: yes, in the dialplan |
| 19:16.45 | WimpMan | Hmm. Looks like you get no port numbers there. Bad. |
| 19:17.28 | *** join/#asterisk emist_ (n=emist@unaffiliated/emist) |
| 19:23.19 | hardwire | jaytee: no debate needed.. I just don't know anything about AMD past the Athlon 32 bit line |
| 19:24.13 | patrickod | jaytee: that works :D |
| 19:24.14 | patrickod | thanks |
| 19:24.46 | jaytee | I know a few who run AMD64 for apache servers and such and there are several people in here that have run * on them just fine. I like having more than one CPU company around to drive competition and innovation :-) |
| 19:24.55 | jaytee | patrickod, cool! |
| 19:25.09 | patrickod | jaytee: thanks a million, that was bothering me for ages :D |
| 19:25.09 | Madkiss | <PROTECTED> |
| 19:25.15 | Madkiss | <PROTECTED> |
| 19:25.25 | Madkiss | look at this -- it says that it's doing the System()-call but apparently it's not |
| 19:25.32 | Madkiss | what could be the problem? |
| 19:25.57 | jaytee | patrickod, that's because each sip account has to point to a valid context in the dialplan and any number that can be dialed from that context will be "dialable" from that sip device. |
| 19:26.17 | *** join/#asterisk rcy (n=rcy@S01060002553240a8.vc.shawcable.net) |
| 19:26.19 | patrickod | ok |
| 19:27.13 | jaytee | patrickod, and from what I could see you didn't actually have an idefisk_tests context in what you pastebined so it couldn't find the extension. |
| 19:27.22 | patrickod | ok |
| 19:27.42 | patrickod | that would make sense, I was trying to follow a tutorial online, I must have deleted what I added and left the settings |
| 19:27.51 | jaytee | if you haven't read Chapter 5 in the book, now would be a good time to start in on it. |
| 19:27.55 | jaytee | ~book |
| 19:27.56 | jbot | methinks book is Asterisk: The Future of Telephony 2nd Edition (ISBN 0-596-51048-9) --- Order yours at http://www.oreilly.com/catalog/9780596510480/ --- Free downloadable PDF http://downloads.oreilly.com/books/9780596510480.pdf --- HTML at http://tfot.leifmadsen.com or see ~buybook |
| 19:30.07 | *** join/#asterisk UnixDawg_ (n=UnixDawg@155.129.204.68.cfl.res.rr.com) |
| 19:35.02 | angryuser | hm i am trying to do soft hangup from console, but, what variable does it take ? call id from console doe not work |
| 19:36.38 | [TK]D-Fender | angryuser: channel |
| 19:37.21 | angryuser | [TK]D-Fender : Peer User/ANR Call ID Seq (Tx/Rx) Format Hold Last Message ? |
| 19:37.42 | angryuser | or like sip/70 ? |
| 19:38.44 | [TK]D-Fender | angryuser: "core show channels concise" |
| 19:39.02 | [TK]D-Fender | angryuser: You do not hangup calls on a protocol level, but on a global * channel level |
| 19:39.43 | angryuser | [TK]D-Fender : thanks for info |
| 19:45.46 | *** join/#asterisk Rico29 (n=Rico@lns-bzn-48f-81-56-220-28.adsl.proxad.net) |
| 19:46.13 | *** join/#asterisk seanmh (n=seanmh@c-68-35-21-64.hsd1.nm.comcast.net) |
| 19:46.46 | hardwire | has anybody here recieved a skype module for asterisk? |
| 19:47.58 | thehar | negative. |
| 19:48.31 | hardwire | I kinda sorta wanna play with it |
| 19:48.48 | angryuser | [TK]D-Fender : i have one channel stuck ;( i have "requested hangup", and that's all, channel still there, last app is chanspy() |
| 19:48.56 | thehar | shh keep that to yourself mister |
| 19:48.58 | hardwire | but I think that is mostly as a distraction |
| 19:49.53 | hardwire | working on documenting Asterisk in an LVS scenario |
| 19:51.39 | *** join/#asterisk Linuturk (n=Linuturk@fluxbuntu/developer/Linuturk) |
| 19:51.59 | thehar | i hunger. |
| 19:52.47 | hardwire | eat a salad. |
| 19:53.02 | hardwire | that's what I'm gonna do in t minus 20 minutes and counting |
| 19:54.37 | *** join/#asterisk emist (n=emist@unaffiliated/emist) |
| 20:00.09 | *** join/#asterisk flush (n=SYN_ACK@ip216-239-75-225.vif.net) |
| 20:04.50 | *** join/#asterisk l2trace99 (n=jr@static-71-251-65-16.tampfl.fios.verizon.net) |
| 20:05.44 | angryuser | hm someone is calling for 2 hours now, i wonder....... |
| 20:07.52 | *** join/#asterisk foamball (n=eisert@user-0c6sp2h.cable.mindspring.com) |
| 20:08.37 | *** join/#asterisk atis_work (n=atis_wor@193.238.212.171) |
| 20:10.53 | hardwire | jaytee: 2.0ghz is E5405? |
| 20:11.02 | jaytee | yeah |
| 20:11.12 | hardwire | 12MB cache? |
| 20:11.17 | jaytee | yep |
| 20:11.42 | hardwire | the site I'm using ommitted the 5405.. probably for price difference reasons |
| 20:11.49 | *** join/#asterisk emist (n=emist@unaffiliated/emist) |
| 20:11.57 | hardwire | but the 5410 is available |
| 20:12.09 | angryuser | yep after use of chanspy call stays in system, Hangup after chanspy does no help, any ideas why ? |
| 20:12.34 | jaytee | she purrs like a kitten and then growls at the network, "C'mon! is that it, bitch? Show me what you got!!!" |
| 20:12.38 | hardwire | pokes angryuser in the ribs |
| 20:13.48 | angryuser | hardwire : do you need any medical attention ? |
| 20:15.13 | *** join/#asterisk mateo_au (n=chatzill@c122-106-221-182.belrs3.nsw.optusnet.com.au) |
| 20:15.35 | hardwire | angryuser: ask again in a few |
| 20:16.30 | hardwire | infact.. ping me every 5 minutes until i stop responding. |
| 20:16.33 | hardwire | then call for help |
| 20:23.40 | hardwire | wonders when the ambulance will pull up. |
| 20:30.33 | *** join/#asterisk jcmoore (n=Curt@unaffiliated/tgrman) |
| 20:30.53 | angryuser | Ok, i have found why this message kicked in , WARNING[7782]: translate.c:175 framein: no samples for ulawtolin, i had a peer(ulaw) calling outgoing peer(ulaw), so i enabled a sip debug, i got a lof of 'Bad Event' from calling peer, so i noticed that the duration of call ir more that 2hrs, i chanspy() in it to be sure, nobody was talking so i restarted *, no more messages, really strange, if someone had this and fixed, tell |
| 20:30.57 | afink_ | I am having trouble getting a pri to work. Qwest told me it is a 5ESS switch. I can make calls out but I can not make calls in, also on the outgoing calls the CID has a bunch of garbage in it. Here is the output from a pri debug span 1 on an incoming call" http://pastebin.ca/1220131 |
| 20:31.33 | afink_ | anybody have any idea what it could be? |
| 20:32.51 | angryuser | afink : it the dump of incoming call ? |
| 20:33.02 | angryuser | it's* |
| 20:33.39 | angryuser | do you have any action set to '3100' ? |
| 20:34.40 | afink_ | angryuser: yes. exten = _3100,1,Goto(ringroups-custom-4|s|1) |
| 20:35.35 | angryuser | hm, try 3100,1,Goto(ringroups-custom-4|s|1) i am not sure if you need _ |
| 20:36.13 | *** join/#asterisk StephenF (n=stephen@c-67-188-58-4.hsd1.ca.comcast.net) |
| 20:37.13 | angryuser | afink : i suppose you have checked if your call coming in a good context ? |
| 20:39.21 | afink_ | yes |
| 20:39.29 | angryuser | afink_ : try to redirect all incoming somewhere, try _X.,1 for testing |
| 20:41.31 | afink_ | I think it is a problem with the pri itself. Now I keep getting: Sending Set Asynchronous Balanced Mode Extended in from pri debug span 1 |
| 20:42.06 | afink_ | and * no longer sees the call coming in |
| 20:43.27 | *** join/#asterisk anthm (n=anthm@freeswitch/developer/anthm) |
| 20:47.23 | jaytee | just out of curiosity, what do you have set for switchtype= in zapata.conf? |
| 20:49.13 | suma | can someone help me to get the google talk to work |
| 20:49.20 | [TK]D-Fender | Ext: 1 Cause: Unallocated (unassigned) number (1), class = Normal Event (0) ] <- says it all. no proper exten in the proper place |
| 20:49.21 | suma | i could not even load the google talk module in asterisk |
| 20:50.13 | afink_ | jaytee: it is set to national. I have setup 5ess in the gui though. |
| 20:53.26 | [TK]D-Fender | afinkYour PRI itself is fine, you dialplan is not. |
| 20:53.35 | afink_ | ok thanks |
| 20:53.48 | [TK]D-Fender | afink : Even better is the fact you show no backup for your congis for us to show you the error from |
| 20:53.57 | [TK]D-Fender | configs* |
| 20:55.14 | *** part/#asterisk patrickod (n=patrick@87.192.246.254) |
| 20:58.04 | afink_ | [TK]D-Fender: I'm sure you are correct but something is up with the pri as well. Status: Provisioned, Down, Active |
| 20:58.27 | jaytee | i think it's safe to assume that after accidentally loading 3/4 of a roll of Tums in the washer and then dryer that my washer and dryer have no acid indigestion whatsoever. |
| 20:59.34 | [TK]D-Fender | afink : And again, you have shown us no configs. |
| 21:00.52 | jaytee | he doesn't have configs, he has a gui, all speckled with smegma |
| 21:02.14 | *** join/#asterisk gsiener (n=gsiener@209.169.48.66) |
| 21:03.24 | [TK]D-Fender | jaytee: And John Mclane said it best.... |
| 21:04.00 | jaytee | ? something along the lines of "Yippee Kai Aye"? |
| 21:04.21 | [TK]D-Fender | jaytee: Yup |
| 21:05.27 | jaytee | I'm just grateful my washer/dryer combo doesn't have heartburn :-) |
| 21:05.29 | suma | can some please help in getting my google talk up and running ! |
| 21:05.43 | jaytee | didja google it? |
| 21:05.58 | suma | jaytee: yes, i could not get solution for it |
| 21:06.12 | suma | for the error which I'm getting out |
| 21:06.31 | Madkiss | just asking out of interest; what is wrong if dialing via chan_capi works flawlessly but as soon as a connection is established, no sound is transmitted. |
| 21:06.47 | Madkiss | w |
| 21:06.50 | [TK]D-Fender | Madkiss: And what did you test with? |
| 21:06.56 | Madkiss | [TK]D-Fender: telephones ;) |
| 21:06.58 | suma | [Jan 22 12:07:51] WARNING[12695]: loader.c:360 load_dynamic_module: Error loading module 'chan_gtalk.so': File not found |
| 21:06.58 | suma | [Jan 22 12:07:51] WARNING[12695]: loader.c:637 load_resource: Module 'chan_gtalk.so' could not be loaded. |
| 21:06.58 | suma | this is what I get when i try to load |
| 21:07.10 | suma | but the chan_gtalk.so is in the modules directory |
| 21:07.23 | [TK]D-Fender | Madkiss: No, coming in from CAPI, what did you do to test audio between it and *? |
| 21:07.39 | Madkiss | [TK]D-Fender: uh, nothing, actually, i didn't think of that. |
| 21:07.50 | [TK]D-Fender | suma: First guess is you compiled a mismatched version to your * ver |
| 21:08.03 | [TK]D-Fender | Madkiss: Half right. The first half.... |
| 21:08.17 | [TK]D-Fender | Madkiss: Get to it |
| 21:08.25 | suma | [TK]D-Fender: i downloaded it from a prebuilt website, it is for openwrt |
| 21:08.55 | [TK]D-Fender | suma: Guess they broke it. Find a way to recompile it for yourself or find some other source. |
| 21:09.08 | [TK]D-Fender | suma: We do not support binray releases here. |
| 21:09.09 | suma | i c |
| 21:09.13 | *** join/#asterisk atis_work (n=atis_wor@193.238.212.171) |
| 21:09.45 | suma | [TK]D-Fender: should it not say that there is an mismatched version, instead it says the file not found |
| 21:10.51 | [TK]D-Fender | suma: *'s levels of descriptiveness vary. Also verify the rights on the file. |
| 21:11.22 | suma | checked on the rights, that looks fine |
| 21:11.29 | suma | 755 |
| 21:11.40 | jaytee | is it executable? |
| 21:11.40 | Madkiss | [TK]D-Fender: how would I do that? |
| 21:11.53 | suma | jaytee; Yes it is |
| 21:12.26 | suma | -rwxr-xr-x 1 root root 39410 Jul 29 2007 chan_gtalk.so |
| 21:12.39 | [TK]D-Fender | suma: and * is run as user root? |
| 21:12.48 | suma | [TK]D-Fender: yes |
| 21:12.58 | suma | rest of the modules are in the same path with the same permission |
| 21:12.59 | [TK]D-Fender | suma: then my first statement stands |
| 21:13.11 | [TK]D-Fender | Madkiss: Gee, I don't know, maybe VOICEMAIL <---- |
| 21:13.23 | Madkiss | [TK]D-Fender: oh, wait, I tried an echo-test. |
| 21:13.37 | Madkiss | [TK]D-Fender: there was nothing. |
| 21:13.59 | [TK]D-Fender | Madkiss: And you're not showing us your test either. All too common here. |
| 21:14.14 | [TK]D-Fender | Madkiss: something THOROUGH. Echo won't tell you which side is defective <- |
| 21:14.33 | [TK]D-Fender | Madkiss: Maybe * hears you but can't play back. Maybe * can play to you but not hear you./ |
| 21:14.42 | Madkiss | [TK]D-Fender: okay. problem is that right now, the setup that was causing the problem does not exist anymore, I finally got through with chan_mISDN. but I am not too comfortable with that, so maybe I will do re-construct it and then do intensive tests. |
| 21:14.51 | [TK]D-Fender | Madkiss: Your thoroughness is severely lacking |
| 21:15.12 | *** part/#asterisk gsiener (n=gsiener@209.169.48.66) |
| 21:15.21 | [TK]D-Fender | Madkiss: So basically this conversation is a complete waste of time? |
| 21:15.25 | [TK]D-Fender | Madkiss: Thanks. |
| 21:15.42 | Madkiss | what happened here that made people *so* unbelievable big jerks? |
| 21:15.44 | Madkiss | jesus christ. |
| 21:15.46 | *** join/#asterisk drako (n=ljd@nelug/coreteam/luisjose) |
| 21:16.12 | [TK]D-Fender | Madkiss: Well we try to help and we keep having the rug pulled out at every turn. Sorry if I sounded bitter. |
| 21:16.43 | [TK]D-Fender | Madkiss: You should perhaps better prefix these things so we don't actually try to hard to fix non-existant problems. |
| 21:16.50 | Madkiss | bitter's the wrong term, i'd say. |
| 21:17.20 | [TK]D-Fender | Madkiss: Thats your perogative. |
| 21:17.32 | jaytee | for the record, jesus christ does not run Asterisk, he runs Trixbox and so far he's the only one to get it running stable. It's a miracle! |
| 21:17.49 | *** join/#asterisk quaqo (n=quaqo@83-103-40-166.ip.fastwebnet.it) |
| 21:18.19 | Madkiss | that's a good one. |
| 21:18.29 | [TK]D-Fender | jaytee: What does trixbox have to do with this exactly? Or was that a random shot? |
| 21:18.40 | jblack | madkiss: Two things in conjuction. FIrstly, a lot of people come in severely unprepared. Secondly, those same people come in treating the people that are donating their time as if they're mexican house boys. |
| 21:18.51 | jaytee | [TK]D-Fender, just another "fire and forget" thing :-) |
| 21:18.58 | *** join/#asterisk david55 (i=david@unaffiliated/david55) |
| 21:19.09 | [TK]D-Fender | jaytee: Ok, was wondering if you were filling in some other bit I should have known about... |
| 21:19.43 | jblack | About 75% of the people come here match that pattern. So, don't take it personally if you happen to be the exception. |
| 21:19.46 | jaytee | nope, AFAIK he's running vanilla with no GUI if that's what you meant |
| 21:20.12 | [TK]D-Fender | jaytee: then again... we don't see anything which leaves us to wonder. |
| 21:20.49 | jaytee | [TK]D-Fender, that's also true. An almost complete lack of information in the form of configs or console output. |
| 21:20.53 | [TK]D-Fender | jblack: We'll reconvene on the "exception" status vote later ;) |
| 21:21.07 | [TK]D-Fender | jaytee: Yup. |
| 21:21.15 | jblack | aye. The jury is still out on that one. =) |
| 21:21.34 | jaytee | and I'm still trying to figure out where those $6 million in kid's wooden arrows in the bailout package is really going to end up |
| 21:21.55 | jblack | In the ass of six million kid sisters. |
| 21:22.06 | jaytee | hahahaa |
| 21:22.27 | Madkiss | jblack: I would actually understand point 1 if this was a high-traffic-channel with 900 residents and 10 lines per second. my question was just one out of interest. as I pointed out. and I was just basically phishing for something like "that's a known misconfiguration and the fix is ...". if that's not the case, then i would expect to be ignored. |
| 21:22.33 | Madkiss | jblack: not to be pissed off. |
| 21:23.26 | jblack | No need to shoot the messenger. I'm just telling you how things are. |
| 21:23.37 | Madkiss | so am I. |
| 21:23.48 | jblack | Ok. You have told me your expectations. |
| 21:24.14 | jblack | Your expectations and reality don't match. Guess which one will have to change? |
| 21:24.43 | jblack | by the way, you're welcome, nay encouraged, to sit here for hours a day and show us how it's done. =) |
| 21:25.29 | [TK]D-Fender | Madkiss: You had no details at all to give us. Akin to saying "hey I've got a problem with the steering on my Ford truck, without saying model numbers, timing info, or anything else practical. No info = no answer |
| 21:25.29 | [TK]D-Fender | Madkiss: It was a guaranteed dead end |
| 21:25.29 | jblack | what's his problem anyways? |
| 21:25.29 | jblack | 'it doesn't work' ? |
| 21:25.29 | [TK]D-Fender | jblack: Oh... he doesn't actually have one. |
| 21:25.29 | anthm | some things never change lol |
| 21:25.32 | [TK]D-Fender | jblack: He was asking about something requiring chan_fluxcapacitor.so |
| 21:25.43 | jblack | Oh, I see. Something about chan_capi, and no sound one way. |
| 21:25.54 | Madkiss | no. no sound both ways. |
| 21:26.11 | [TK]D-Fender | jblack: But then again, was CAPI even the element at fault? Can't say now can we? |
| 21:26.29 | jaytee | Madkiss, I came in here about a year and a half ago a total noob. If you actually LISTEN to what the people in this channel ask for when they ask for your configuration info and you supply it they'll help you. If you ignore it or omit things they'll naturally get annoyed or frustrated. |
| 21:26.52 | jblack | madkiss: Ok. Either you have misconfigured things, or your provider has misconfigured things, or you and your provider aren't seeing eye to eye on your account balance. |
| 21:26.54 | afink_ | [TK]D-Fender: , jaytee thanks for your help. |
| 21:26.54 | [TK]D-Fender | anthm: Nope! |
| 21:27.00 | jaytee | so if you provide what's asked for you'll get help and actually learn something |
| 21:27.13 | [TK]D-Fender | afink : Hope you found whatever it was. |
| 21:27.24 | [TK]D-Fender | jaytee: Its all posthumous anyway... |
| 21:27.27 | afink_ | I was the contexts and incorrect switch type |
| 21:27.32 | afink_ | I = It |
| 21:28.05 | Madkiss | jblack: i guess point two and three are invalid; using mISDN and chan_mISDN directly, I get a perfect connection now. It's just that I don't trust chan_mISDN too much and I would sleep better if I knew that the capi-fallback exists. |
| 21:28.38 | jblack | Uh-huh. |
| 21:28.50 | jblack | So, that would put us at "everything's right, but it doesn't work" |
| 21:29.19 | WimpMan | does not hav goo experiences with chan_capi. I'd stick with mISDN. |
| 21:30.07 | WimpMan | But I do agree that mISDN may not be a good solution, I fear it's the best. |
| 21:30.14 | Madkiss | WimpMan: Actually, I don't trust mISDN (the kernel part) either. but. well. I don't trust ISDN ... I think there's round about 10 people that understand ISDN well enough to be able to write drivers, and actually, two of then too, I guess. |
| 21:30.18 | jblack | Conflicting statements only work in religion and politics, so unless you're intentionally causing things to not work... you get to pick which one is right. |
| 21:30.52 | jblack | Oh, and marriage. |
| 21:30.55 | WimpMan | likes to think he does. |
| 21:31.06 | Madkiss | jblack: okay. See. mISDN and chan_mISDN: Works now but makes me angry. mISDN and mISDN_capi.ko and chan_capi: I can establish phone connections, but there is no sound in either direction. |
| 21:32.01 | tzafrir_laptop | suggests chan_zap |
| 21:32.17 | Madkiss | well, we would need to buy new hardware for that |
| 21:32.53 | jblack | I'd fiddle with rxgain and txgain, increasing debugging. I use neither misdn nor capi. |
| 21:33.09 | Madkiss | oh, one thing comes to my mind. the box has no sound card, so there are absolutely no sound drivers loaded, not even the dummy one. maybe chan_capi needs that? although it did not produce an error message. |
| 21:33.19 | WimpMan | I don't like bristuff because it doesnt support current * Versions. And then there are known issues as well. |
| 21:33.30 | jblack | I doubt it needs a sound card. |
| 21:34.01 | jblack | Why would you think a sound card would be necessary? |
| 21:34.19 | Madkiss | jblack: not a soundcard, but maybe it needs that dummy-mixer that exists for linux |
| 21:34.26 | jaytee | can't think why any ISDN card would need ALSA or OSS support |
| 21:34.35 | *** join/#asterisk russellb (n=russell@asterisk/digium-open-source-team-lead/russellb) |
| 21:34.35 | *** mode/#asterisk [+o russellb] by ChanServ |
| 21:34.42 | jaytee | hi russell |
| 21:34.55 | russellb | waves |
| 21:34.55 | WimpMan | Dosn't make sense to me either. |
| 21:34.58 | jblack | jaytee: Nor can I,unless he's trying to spy with a speaker hooked up to a sound card? |
| 21:35.28 | Madkiss | great, then that i dea was just wrong, i guess. |
| 21:35.29 | WimpMan | Might be helpful for debugging. But that's it. |
| 21:36.33 | jblack | I'd fiddle with rxgain and txgain. |
| 21:36.46 | jblack | Then I'd see if the capi channel has debug options. |
| 21:36.53 | WimpMan | wouldn't |
| 21:36.54 | jblack | goes off to clean up. |
| 21:37.04 | jblack | WimpMan: Oh? |
| 21:37.26 | Madkiss | it might just as well be some madness between mISDN_capi and mISDN_dsp. |
| 21:37.31 | WimpMan | Why would you want to play with gain on a digital cahnnel? |
| 21:37.51 | jblack | chan_capi has rxgain and txgain options. :) |
| 21:38.35 | jblack | At least from what I gather from http://www.junghanns.net/en/chan_capi.html |
| 21:38.39 | WimpMan | But what are they good for, except breaking dtmf recognition? |
| 21:40.01 | WimpMan | And it's a pretty senseless option per interface. To make sense it would have to be per Terminal. |
| 21:41.09 | *** join/#asterisk johnakabean (n=none@pool-72-82-113-223.nrflva.east.verizon.net) |
| 21:41.12 | WimpMan | (which isn't possible usually) |
| 21:41.21 | Madkiss | i will give it another look tomorrow, I guess. or maybe I will try to get the mISDN-guy fix the 2.6.27-code to have my hfc-card recognized. |
| 21:41.47 | johnakabean | hey room i need help upgrading asterisk from 1.4 to 1.6. Will freepbx 2.5 (latest updates) support it and what changes to freepbx do I need to make? |
| 21:42.07 | WimpMan | mISDN works with 2.6.27? |
| 21:42.14 | Madkiss | it's actually included. |
| 21:42.23 | Madkiss | in an absolutely stripped down version, but it's in. |
| 21:42.34 | WimpMan | Ok. |
| 21:42.55 | WimpMan | had the impression it was a little behind. |
| 21:43.09 | johnakabean | asterisk 1.4.22 is currently running. How do i install 1.6 without losing settings? |
| 21:43.17 | *** join/#asterisk stencil (n=stencil@pdpc/supporter/student/stencil) |
| 21:44.02 | hardwire | http://cgi.ebay.com/LOT-OF-10-INTEL-SR1300-1U-DUAL-XEON-2-8GHZ-1GB-SCSI-NEW_W0QQitemZ230297353132QQcmdZViewItem?hash=item230297353132&_trkparms=72%3A1205|39%3A1|66%3A2|65%3A12|240%3A1318&_trksid=p3286.c0.m14 |
| 21:44.03 | hardwire | sgh |
| 21:44.10 | hardwire | that's sooo worth it |
| 21:44.36 | johnakabean | I realize its worth it but do I just use my configure command line from 1.4 or what? |
| 21:45.15 | *** join/#asterisk cesal (n=jcesarlp@190.43.54.60) |
| 21:45.42 | cesal | alguien habla espanol? |
| 21:45.56 | hardwire | nyet |
| 21:46.02 | johnakabean | Yo no hablar much espanol |
| 21:46.08 | johnakabean | mucho* |
| 21:46.10 | cesal | spaciva |
| 21:46.19 | hardwire | que? |
| 21:46.21 | [TK]D-Fender | johnakabean: Don't do "make samples" and you'll be fine. You'll of course want to copy over NEW config files required for 1.6 |
| 21:46.31 | cesal | what? |
| 21:46.35 | hardwire | what? |
| 21:46.45 | cesal | q cosa? |
| 21:46.53 | hardwire | 1:46 pm |
| 21:46.59 | johnakabean | Thanks fender, Isn't there some proggy that can read the config files and make the changes. It compares them and appends them |
| 21:47.12 | cesal | bueno bueno |
| 21:47.24 | cesal | alguien desocupado q me pueda orientar |
| 21:47.25 | hardwire | cesal: where do you hail from? |
| 21:47.31 | [TK]D-Fender | johnakabean: No. * cannot be psychic about what you have done |
| 21:47.42 | johnakabean | Cosa es "time" en ingles? |
| 21:47.45 | Danskmand | Madkiss - Bist du noch da ? |
| 21:47.48 | hardwire | thinks he just got mooned en espagnol |
| 21:47.48 | cesal | no |
| 21:47.49 | Madkiss | Danskmand: mhm |
| 21:47.58 | [TK]D-Fender | johnakabean: And besides the only thing that comes included with * are SAMPLES. Worthless for anything requiring real configuration. |
| 21:48.01 | cesal | what's up = q cosa |
| 21:48.14 | hardwire | q hora es oi? |
| 21:48.46 | johnakabean | I'm not asking if asterisk can make the changes. I'm asking for a utility to compare files and append the changes |
| 21:48.48 | Danskmand | Kann ich dich einladen zu unserem Kanal - Wir warten schon auf dich (2 Personen)....Wir sind auf #IPFire |
| 21:49.00 | johnakabean | I will manually go in, of course, and check them. |
| 21:49.01 | hardwire | whats IP Fire? |
| 21:49.12 | cesal | ask in private |
| 21:49.34 | WimpMan | Language inflation. |
| 21:49.48 | johnakabean | Wimp is that for me? |
| 21:50.34 | WimpMan | No, that was about spanish and german suddenly appearing here. |
| 21:51.24 | hardwire | I'll allow it! |
| 21:51.57 | [TK]D-Fender | johnakabean: No, there is no append, and there is no POINT to one. The samples aren't usable as-is |
| 21:52.45 | johnakabean | Es no espanol clase |
| 21:53.27 | WimpMan | "Das kommt mir spanisch vor." |
| 21:53.34 | johnakabean | This isn't dutch either |
| 21:54.07 | cesal | alguien de peru? |
| 21:54.10 | cesal | o cercanias |
| 21:54.14 | johnakabean | Dit is geen Nederlandse klasse. |
| 21:55.05 | WimpMan | Jeg kan også anderledels. |
| 21:55.33 | johnakabean | Fender, I use Freepbx |
| 21:56.00 | johnakabean | it should fix the sip and other .conf files except for manager.conf and such which I need to change |
| 21:56.21 | johnakabean | I have a bunch of custom extensions in extensions.conf |
| 21:56.25 | johnakabean | I can't lose them |
| 21:57.36 | [TK]D-Fender | johnakabean: FrePBX is NOT supported in here |
| 21:57.54 | [TK]D-Fender | johnakabean: And its configs are built based on SQl data anyways. |
| 21:58.12 | [TK]D-Fender | johnakabean: And custon stuff you've done you should have the brains to back up anyway |
| 21:58.31 | thehar | snickers |
| 21:58.34 | johnakabean | i''m not talking about the extnesions that freepbx makes, i'm talking about my own I made in extensions.conf and I'm sorry you have to be arrogant |
| 21:58.40 | [TK]D-Fender | johnakabean: And then there is the question of if your FreePBX is even functional under 1.6 |
| 21:59.01 | RypPn | fpbx 2.5 works fine with 1.6 |
| 21:59.04 | johnakabean | I don't use zaptel hardware so I am not dependent on it |
| 21:59.09 | [TK]D-Fender | johnakabean: extensions.conf gets rebuilt by FreePBX on every commit |
| 21:59.10 | johnakabean | thank you ryppn |
| 21:59.19 | johnakabean | LOL it doesn't delete it just appends |
| 21:59.45 | johnakabean | My changes have stayed for months after constant upgrades and everything. I think i'll ask someone who knows what they're talking about |
| 21:59.48 | [TK]D-Fender | johnakabean: All of this of course has nothig to do with installing * 1.6 beyond not doing "make samples". |
| 22:00.31 | RypPn | the question would probably be better fielded in #freepbx all the same :) |
| 22:00.38 | johnakabean | Rypn, do you know of any utilities that reads two files and appends the changes to one |
| 22:01.11 | RypPn | sounds like diff to me |
| 22:01.18 | johnakabean | yep that's it |
| 22:01.21 | jaytee | or Kdiff |
| 22:01.26 | RypPn | or meld |
| 22:01.34 | [TK]D-Fender | johnakabean: And again, there is no need, because nothing in the * samples is usable and would at best screw you over for including stuff that is of no use where it will conflist with other stuff. |
| 22:01.40 | johnakabean | thanks, there are people in here with brains, I used diff before |
| 22:01.56 | johnakabean | I want to use it with my .conf files when I upgrade 1.4 to 1.6 |
| 22:02.28 | [TK]D-Fender | johnakabean: But what you're not following is that the sample fuiles are USLESS and merging them can only cause trouble for absolutely no benifit. |
| 22:02.43 | johnakabean | alright I just backed up all my configs with ONE command |
| 22:02.55 | jaytee | lemme guess? tar? |
| 22:03.00 | [TK]D-Fender | johnakabean: cp ? ;) |
| 22:03.00 | johnakabean | cp |
| 22:03.06 | johnakabean | to another directory |
| 22:03.27 | jaytee | wait till he finds out about rsync! |
| 22:03.36 | johnakabean | Do I need to use the same configure line from 1.4 on 1.6 |
| 22:04.19 | jaytee | now would be a good time for that rabbit with a pancake hat |
| 22:04.31 | johnakabean | ????????? |
| 22:04.35 | cesal | hi i wanna do the following |
| 22:04.42 | jaytee | nutthin, just ramblin |
| 22:04.58 | cesal | i want to install asterisk on a vm, and then connect from windows |
| 22:05.01 | cesal | using .net |
| 22:05.07 | cesal | is it posible? |
| 22:05.29 | RypPn | jaytee: http://ryppn.ath.cx/bunny.jpg |
| 22:05.52 | jaytee | god, I love that shot :-) |
| 22:06.18 | [TK]D-Fender | johnakabean: what "configure line" are you talking about? |
| 22:06.36 | [TK]D-Fender | johnakabean: That is very vague |
| 22:07.06 | RypPn | only ever beaten by... htpp://ryppn.ath.cx/fom.jpg |
| 22:07.30 | RypPn | oops |
| 22:07.32 | jaytee | cesal, connect to Asterisk from Windows using .NET? I imagine it could be done but I'm not familiar enough with the .NET libraries to say for sure. |
| 22:07.42 | RypPn | swap out that p for a t :) |
| 22:08.30 | cesal | yes |
| 22:08.53 | cesal | well the libraries exist |
| 22:09.07 | jaytee | if you're talking about using .NET to connect to the Asterisk AMI |
| 22:09.09 | cesal | has someone use them? |
| 22:09.14 | [TK]D-Fender | cesal: Connect how? * only speaks a dozen or so different protocols. |
| 22:09.24 | jaytee | got a link for the libs you're using? |
| 22:10.17 | cesal | http://sourceforge.net/projects/asterisk-dotnet/ |
| 22:10.21 | cesal | ahi esta |
| 22:10.46 | WimpMan | You need alibrary to connect to ami??? |
| 22:11.01 | *** join/#asterisk pcrane (n=pcrane@202.49.106.158) |
| 22:11.20 | cesal | i am new |
| 22:11.20 | jaytee | no, you don't |
| 22:11.31 | cesal | i have to do the followin |
| 22:11.40 | cesal | a have an app made in .net |
| 22:12.06 | cesal | and i want to program, somethings related to asterisk |
| 22:12.16 | cesal | for example |
| 22:12.25 | cesal | open a line |
| 22:12.28 | cesal | close a line |
| 22:13.13 | jaytee | cesal, then read up in "the book" about using the Manager API and then try to utilize the .NET libs to do what you want. |
| 22:14.12 | seanbright | it's most definitely possible |
| 22:14.15 | pcrane | has anyone seen this before: "SIP response 404 to standard invite" |
| 22:14.22 | cesal | is just that there are many things |
| 22:14.39 | pcrane | cesal: start off with something simple |
| 22:14.41 | seanbright | i have a windows server that listens for and handles FastAGI requests |
| 22:14.49 | cesal | thats why i am asking if someones have use them |
| 22:14.49 | seanbright | s/server/service/ |
| 22:14.51 | pcrane | originating calls is about a simple as you can get ;) |
| 22:15.01 | pcrane | it's cool it see it working |
| 22:15.57 | *** join/#asterisk JacksLivr (n=JacksLiv@jules.dougstuff.com) |
| 22:16.26 | [TK]D-Fender | pcrane: From what? |
| 22:16.46 | pcrane | I've got a SIP trunk set up between two asterisk servers |
| 22:16.50 | pcrane | I can control both ends |
| 22:17.12 | joat | used perl to do similar |
| 22:17.14 | hardwire | cesal: you asked me if you could run asterisk in a VM |
| 22:17.14 | hardwire | yes |
| 22:17.21 | hardwire | you can also run asterisk on win32, afaik |
| 22:17.23 | pcrane | but when I start a call on one, I see that message on that machine |
| 22:17.29 | pcrane | and nothing in the console of the other |
| 22:17.32 | jaytee | a sip trunk? I thought those were banned under the Hagamite Accords in 2235 by both Earth government and the Denebians? |
| 22:17.41 | hardwire | cesal: check out www.voip-info.org |
| 22:17.52 | cesal | inmediatly |
| 22:18.02 | hardwire | ? |
| 22:18.02 | [TK]D-Fender | pcrane: Pastebin <- |
| 22:18.05 | JacksLivr | hey guys. quick question. I have an iaxy that i used like a year ago. It has been in a box for a while and now i wish to configure it. I have the iaxy and a laptop. The iaxy is configured to get an address via dhcp, but there is no way that i can figure out to change the ser ver that iaxy tried to contact without getting intot the device |
| 22:18.09 | pcrane | http://pastebin.com/m1dc4ef93 |
| 22:18.10 | JacksLivr | can you help me ? |
| 22:18.14 | pcrane | with debugging ;) |
| 22:18.18 | joat | jaytee, you're thinking Debians, not Denebians... entirely different species |
| 22:18.19 | pcrane | sip and console debug |
| 22:18.21 | cesal | hardwire, have u used .net libraries? |
| 22:18.55 | pcrane | JacksLivr: you want to know the IP address of iaxy? |
| 22:19.03 | hardwire | cesal: I'm sure I have, and it was probably accidental when it happened. |
| 22:19.07 | pcrane | you know the mac address? |
| 22:19.20 | joat | JacksLivr: you have a sniffer? |
| 22:19.38 | JacksLivr | i do have a sniffer on my laptop |
| 22:19.59 | JacksLivr | thgouth about setting up dhcp server on my laptop |
| 22:20.02 | hardwire | cesal: there are .net bindings for the asterisk manager interface.. and fastagi works well with any programming language that can operate a TCP session. |
| 22:20.05 | WimpMan | Ask the dhcp server? |
| 22:20.15 | JacksLivr | i sed the dhc[p discover from the iaxy |
| 22:20.29 | JacksLivr | see |
| 22:20.38 | pcrane | what IP range are you on? |
| 22:20.39 | joat | WimpMan: too obvious of a correct answer... we're trying to do it the hard way |
| 22:20.41 | joat | heh |
| 22:20.46 | pcrane | cause you can ping the broadcast addr: |
| 22:20.51 | WimpMan | sorry |
| 22:20.53 | pcrane | ping 192.168.255.255 -d |
| 22:20.59 | pcrane | or look at the arp tables: |
| 22:21.02 | pcrane | arp -a |
| 22:21.22 | JacksLivr | pcrane: the iaxy has no ip address |
| 22:21.28 | pcrane | sorry, the ping should be -b, not -d |
| 22:21.32 | *** join/#asterisk LARefugee (n=chatzill@c-76-104-191-194.hsd1.wa.comcast.net) |
| 22:21.49 | cesal | first this |
| 22:22.04 | *** join/#asterisk mvanbaak_ (n=michiel@asterisk/contributor-and-bug-marshal/mvanbaak) |
| 22:22.09 | cesal | can i install asterisk on a virtual machine, and connect from windows |
| 22:22.11 | cesal | using .net |
| 22:22.20 | cesal | u understand what i mean? |
| 22:22.28 | pcrane | [TK]D-Fender: any suggestions? |
| 22:22.28 | jaytee | cesal, I'd say yes to both |
| 22:22.40 | seanbright | you mean like VirtualPC or Virtual Server 07 virtual machine? |
| 22:22.41 | jaytee | people have installed * on VMs |
| 22:22.46 | [TK]D-Fender | pcrane: Too much debug crap. Just sip debug & verbose 10 please. Also, from BOTH sides |
| 22:22.58 | pcrane | the other side has a lot of other stuff going on |
| 22:23.00 | pcrane | ok |
| 22:23.00 | cesal | yes |
| 22:23.03 | pcrane | I'll see what I can do |
| 22:23.09 | jaytee | and people have connected to * from a Windows client |
| 22:23.12 | seanbright | cesal: shouldn't be a problem |
| 22:23.22 | cesal | ok perfect |
| 22:23.22 | WimpMan | BTW: Doesn anyone know if there is ANY hardware support if you'd try * on Solaris? |
| 22:23.26 | [TK]D-Fender | pcrane: Don't expect us to run after this half blind. |
| 22:23.33 | pcrane | ok |
| 22:23.54 | seanbright | cesal: i do remember something when the latest version of Virtual PC came out that some people were saying MS didn't support installing linux on it |
| 22:24.02 | seanbright | cesal: but i think it works just fine (IIRC) |
| 22:24.48 | cesal | well i am new |
| 22:24.59 | seanbright | cesal: yes, you've said that. |
| 22:25.11 | seanbright | cesal: start by getting a VM up and running |
| 22:25.12 | cesal | which version of linux should i use? |
| 22:25.20 | seanbright | cesal: CentOS |
| 22:25.25 | cesal | i already have that |
| 22:25.29 | seanbright | perfect |
| 22:25.41 | cesal | but another version more light |
| 22:25.45 | seanbright | i see |
| 22:25.51 | seanbright | CentOS+Lite |
| 22:25.54 | seanbright | is kidding |
| 22:25.58 | cesal | jajjjjaj |
| 22:26.05 | jaytee | is that like Bud Light or Miller Lite? |
| 22:26.05 | seanbright | i use centos |
| 22:26.18 | seanbright | jaytee: just like that. |
| 22:28.05 | jaytee | it really sucks when you get a greater feeling of accomplishment doing a load of dishes than you do from your paying job. |
| 22:28.37 | pcrane | from one: http://pastebin.com/m7316f9d1 |
| 22:30.08 | cesal | how big is centos? |
| 22:30.21 | *** join/#asterisk david55 (i=david@unaffiliated/david55) |
| 22:30.22 | seanbright | about... |----------------------| |
| 22:31.12 | cesal | on a dvd? |
| 22:31.41 | *** join/#asterisk tryggvib (n=tryggvi@194-144-90-123.du.xdsl.is) |
| 22:32.04 | jaytee | you can get CentOS on a single DVD or about 5 CDs. |
| 22:32.34 | johnakabean | jaytee, you can use one cd and it will download the rest |
| 22:32.48 | cesal | the link to download the iso please |
| 22:32.50 | cesal | on a dvd |
| 22:32.56 | pcrane | I use debian |
| 22:33.05 | pcrane | can get a netinstall download |
| 22:33.08 | johnakabean | cesal, you can use on CD and it will download the rest as it needs them |
| 22:33.14 | johnakabean | yeah thanks pcrane |
| 22:33.26 | pcrane | download about 100MB or so |
| 22:33.32 | pcrane | and it'll download the rest as it installs |
| 22:33.35 | cesal | i won't burnt it |
| 22:33.53 | jaytee | http://mirror.centos.org/centos/5/isos/ |
| 22:33.54 | cesal | i going to dowload it and then isntall it on my vm |
| 22:33.57 | johnakabean | cesal are you using windows to burn |
| 22:33.59 | cesal | i use virtual box |
| 22:34.09 | johnakabean | lost |
| 22:34.50 | pcrane | and the other: http://pastebin.com/m7db9c4cf |
| 22:35.20 | pcrane | I've removed as much of the other crap from that 2nd one as I can |
| 22:35.37 | pcrane | it should mostly be the relevent parts of the debugging |
| 22:37.09 | [TK]D-Fender | pcrane: Looking for 917148097859 in default (domain 10.1.1.16) SIP/2.0 404 Not Found |
| 22:37.15 | [TK]D-Fender | pcrane: Easy enough. |
| 22:37.22 | pcrane | ok |
| 22:37.31 | pcrane | so it can't find that extension... |
| 22:37.31 | tryggvib | Hello, I'm trying to create an n00b SIP server... and I've been reading online and in the Asterisk book how to do it. I am kinda lost regarding registering usernames... anyone care to explain? |
| 22:37.55 | [TK]D-Fender | pcrane: 404 says "not found". Could be the user, could be the exten. extremely quick to see which |
| 22:38.01 | tryggvib | From what I understand I have to create them in sip.conf |
| 22:38.03 | pcrane | hits head on nearest hard object... |
| 22:38.07 | johnakabean | you mean adding extensions..........tryggvib |
| 22:38.26 | pcrane | hmm... |
| 22:38.29 | [TK]D-Fender | tryggvib: For sip, yes |
| 22:38.30 | tryggvib | johnakabean, I've done that but registering fails |
| 22:38.42 | johnakabean | asterisk -r |
| 22:38.45 | johnakabean | restart now |
| 22:38.59 | [TK]D-Fender | johnakabean: And why are you suggesting a hard restart of *? |
| 22:39.23 | riddlebox | hrmm my analog phones all of a sudden cannot access any of my voice menus, and my voicemail, but when a call comes in they ring |
| 22:39.39 | jaytee | hmmm, I forgot I bought cheddar..... |
| 22:40.54 | tryggvib | [TK]D-Fender, how do I register the usernames I've created in sip.conf... |
| 22:41.28 | *** join/#asterisk sucituanbo (n=free@c-24-21-121-148.hsd1.wa.comcast.net) |
| 22:41.29 | [TK]D-Fender | tryggvib: www.pastebin.com <- go show us your setup masking only passwords |
| 22:42.02 | tryggvib | wait a sec |
| 22:42.21 | tryggvib | First I'm going to try something out... |
| 22:42.57 | cesal | could someone tell from where i download everything in just one iso? |
| 22:43.28 | cesal | i mean centos |
| 22:43.46 | WimpMan | linuxiso.org would be the usual suspect. |
| 22:44.13 | *** join/#asterisk rasterix (n=IceChat7@80.177.176.254) |
| 22:44.14 | seanbright | centos.org too |
| 22:44.25 | jaytee | http://isoredirect.centos.org/centos/5/isos/i386/ |
| 22:44.38 | jaytee | you can also get x64 images there too |
| 22:45.16 | johnakabean | http://isoredirect.centos.org/centos/5/isos/x86_64/ |
| 22:45.22 | johnakabean | be blunt about it |
| 22:46.59 | rasterix | quick question... for a windows editor for the asterisk conf files what would be the best way to transfer the files |
| 22:47.10 | rasterix | im thinking sftp? |
| 22:47.17 | jaytee | I use FileZilla |
| 22:47.27 | jaytee | which uses sftp |
| 22:47.44 | rasterix | so u edit ur conf files in windows? |
| 22:47.53 | jaytee | no, not usually |
| 22:48.24 | rasterix | ive pretty much got intellisense workin in but it has to be under windows |
| 22:48.32 | cesal | i just one 1 iso |
| 22:48.37 | cesal | all in 1 iso |
| 22:48.43 | cesal | no 5 |
| 22:48.50 | jaytee | gaaaahhhhhkkk, intellisense ....... (shudders) |
| 22:49.02 | rasterix | lol jaytee |
| 22:49.09 | rasterix | the good bits of intellisense |
| 22:49.56 | rasterix | if there are any |
| 22:50.01 | pcrane | ok |
| 22:50.09 | pcrane | so, I fixed the problem |
| 22:50.13 | rasterix | it auto completes application names function names etc |
| 22:50.20 | tryggvib | [TK]D-Fender, nope what I was trying didn't work... here are my sip.conf and extensions.conf files: http://pastebin.com/m2a420513 |
| 22:50.22 | pcrane | it's important to add in a context= line in sip.conf ;) |
| 22:50.25 | tryggvib | I am getting a registrations timeout |
| 22:50.32 | rasterix | shows some basic syntax errors |
| 22:50.42 | pcrane | hits head on a brick wall |
| 22:51.18 | WimpMan | pcrane: It's not the wall's fault! |
| 22:51.28 | pcrane | heh |
| 22:51.29 | [TK]D-Fender | tryggvib: thse are supposed to be 2 local SIP phones anren't they? |
| 22:51.30 | pcrane | ;) |
| 22:51.44 | rasterix | and it shows the syntax for each application / function (obviously) |
| 22:51.55 | tryggvib | yes... two phones (similar to ekiga accounts) |
| 22:52.08 | [TK]D-Fender | tryggvib: well remove the 2 "register" lines from your sip.conf |
| 22:52.17 | tryggvib | ok |
| 22:52.20 | cesal | centos is 3.7gb? |
| 22:52.23 | [TK]D-Fender | tryggvib: they don't belong. That is for when Asterisk has to register to another server. |
| 22:52.29 | tryggvib | aaaaa |
| 22:52.34 | angryuser | cesal : likely |
| 22:52.35 | [TK]D-Fender | tryggvib: You're PHONES should be trying to rregister to * |
| 22:52.41 | [TK]D-Fender | your* |
| 22:52.43 | rasterix | but what im wondering is how people want to transfer the conf files... i tried using the ami functions but they strip out comments etc |
| 22:53.02 | tryggvib | I didn't quite understand why asterisk should be client (but of course that's for my asterisk server to connect to another) |
| 22:53.31 | cesal | i want i short version |
| 22:54.08 | WimpMan | rasterix: I'd guess there's ssh, ssh or ssh. Some peple might prefer ssh, I'd use ssh and most sensibly you go for ssh. |
| 22:54.33 | angryuser | cesal : grab a netinstall |
| 22:54.41 | rasterix | lol@wimpman |
| 22:54.50 | rasterix | so u think its a no brainer |
| 22:55.40 | jaytee | there's always ssh with the umlaut encryption add-in |
| 22:56.00 | cesal | which is the last version |
| 22:56.02 | cesal | 5.2? |
| 22:56.07 | angryuser | rasterix : use winscp or such |
| 22:56.08 | rasterix | maybe im missing a trick |
| 22:56.10 | WimpMan | Ok, I use rsync, but that usually probably wouldn't meet secuity demands. |
| 22:56.15 | angryuser | cesal : yes |
| 22:56.32 | rasterix | but ssh isnt a file transfer protocol? |
| 22:56.46 | angryuser | rasterix : it is |
| 22:56.56 | WimpMan | But sftp and scp are, and they are ssh. |
| 22:57.02 | rasterix | ahhh |
| 22:57.10 | WimpMan | But plain ssh will also do. |
| 22:57.15 | rasterix | sftp is what i was going to use |
| 22:57.30 | cesal | could i use ubuntu? |
| 22:57.32 | pcrane | cesal: I know you said centos... why not use debian, can download a netinst cd for 180MB |
| 22:57.34 | cesal | la version desktop |
| 22:57.36 | pcrane | cesal: yes |
| 22:57.48 | angryuser | cesal : for what ? |
| 22:57.48 | pcrane | ubuntu is more or less debian |
| 22:57.54 | pcrane | debian is more or less ubuntu |
| 22:58.00 | cesal | for asterisk |
| 22:58.06 | pcrane | cesal: http://www.debian.org/CD/netinst/ |
| 22:58.11 | rasterix | so basically sftp would be a sensible choice |
| 22:58.16 | rasterix | thats what im using |
| 22:58.26 | angryuser | use debian netinstall if you search minimal install |
| 22:58.38 | cesal | u r using ubuntu |
| 22:58.38 | cesal | ? |
| 22:58.55 | rasterix | i thought about samba.... |
| 22:59.01 | angryuser | cesal : choose whatever you know best |
| 22:59.25 | WimpMan | rasterix: nono. No good for internet use. |
| 22:59.38 | rasterix | yah i kind of wrote it off |
| 23:00.02 | pcrane | cesal: we use debian routinely |
| 23:00.13 | cesal | i just want to be able to use asterisk |
| 23:00.13 | pcrane | I find that it's easier than centos |
| 23:00.26 | cesal | so in resume i can use ubuntu, to install astersik |
| 23:00.40 | pcrane | (probably because I'm more farmiliar with the debian package management system) |
| 23:00.41 | pcrane | yes |
| 23:00.54 | angryuser | cesal : use asterisknow then |
| 23:01.13 | rasterix | if anyones interested in trying my intellisense editor let me know |
| 23:01.23 | rasterix | it only supports extensions.conf |
| 23:01.26 | rasterix | at the moment |
| 23:01.49 | WimpMan | rasterix: When will the X-Windows version be ready then? |
| 23:02.00 | rasterix | no can do wimpman :( |
| 23:02.09 | rasterix | its beyond my programming ability |
| 23:02.12 | rasterix | i looked at it |
| 23:02.15 | rasterix | and gave up |
| 23:03.03 | *** join/#asterisk styelz (n=yoohoo@2001:388:c098:0:0:0:0:1) |
| 23:03.32 | cesal | is it necesary to have an fxs, fxo cards? |
| 23:03.36 | cesal | to use asterisk? |
| 23:03.42 | rasterix | my thought is most people haeve at least one windows machine on their network |
| 23:04.05 | _Raptor_ | cesal: no, not if you don't want do connect the asterisk to the line |
| 23:04.15 | WimpMan | rasterix: I hanen't. What could it be good for? |
| 23:04.28 | rasterix | lol ok wimpman |
| 23:04.35 | rasterix | i guess u wont be testing it :( |
| 23:05.02 | WimpMan | I'm neither into gaming nor do I like viruses. |
| 23:05.09 | cesal | so i can use asterisk and start programming my app without that? |
| 23:05.33 | rasterix | haha i have better things to do than write viruses |
| 23:05.35 | tryggvib | [TK]D-Fender, sorry for nagging you... but you know my case... now I've got the two softphones registered but they cannot call one another... my asterisk server says users unknown |
| 23:05.35 | rasterix | but ok |
| 23:05.54 | [TK]D-Fender | tryggvib: Go to CLI and look at SIP DEBUG. |
| 23:05.54 | pcrane | cesal: yes |
| 23:05.59 | tryggvib | thanks |
| 23:06.12 | pcrane | cesal: you can get a SIP/IAX accounts for free on the internet |
| 23:06.46 | WimpMan | rasterix: No need. There are enough others who do so. |
| 23:06.49 | *** join/#asterisk emist (n=emist@unaffiliated/emist) |
| 23:07.00 | cesal | sorry for my question |
| 23:07.07 | cesal | but for what? |
| 23:07.30 | pcrane | SIP/IAX are like telephone lines, but they use voip |
| 23:07.41 | rasterix | speaking of viruses i managed to get AntiVirus 2008 on a pc |
| 23:07.54 | pcrane | so, you can initiate a call and have it terminate on the normal telephone network |
| 23:08.00 | rasterix | took me 2 hours to get rid of that mofo... avg failed completely |
| 23:10.04 | LARefugee | Forgive me but I'm addicted to console dialing. |
| 23:10.13 | tryggvib | [TK]D-Fender, I'm getting extensions not found... so I'm guessing my short extensions.conf file is too short am I forgetting anything (the pastebin site is still: http://pastebin.com/m2a420513 ) |
| 23:10.30 | tryggvib | i.e. the extension I'm calling is not found |
| 23:10.43 | pcrane | what's the console output? |
| 23:10.57 | [TK]D-Fender | tryggvib: You have no context listed for your extensions.conf bit there. |
| 23:10.58 | cesal | can u explain me that? |
| 23:10.59 | seanbright | tryggvib: add [sip] to the top of your extensions.conf |
| 23:10.59 | pcrane | what context are the extensions in? |
| 23:11.01 | cesal | please |
| 23:11.11 | tryggvib | aaa... of course :) |
| 23:11.16 | tryggvib | thank you all |
| 23:11.28 | seanbright | no problem, $125 to sean.bright@gmail.com |
| 23:11.29 | seanbright | kthx |
| 23:12.09 | tryggvib | I would if the Icelandic currency wasn't in the drains right now |
| 23:12.17 | seanbright | so is the USD |
| 23:12.17 | tryggvib | :p |
| 23:12.32 | seanbright | we just gave a bunch of corrupt bankers $700 billion |
| 23:12.38 | tryggvib | last week 1 USD was 67 ISK now its 115 ISK |
| 23:12.42 | seanbright | we obviously all wipe our asses with cash |
| 23:12.47 | rasterix | lol that was funny |
| 23:12.54 | LARefugee | one day I have to try console flash but first I have to get chan_alsa working.. |
| 23:13.07 | rasterix | the big cats really got taught a lesson on this one |
| 23:13.41 | rasterix | gamble with peoples money if ur a bank... and the government will give it all back... i need to find a casino like that |
| 23:14.44 | [TK]D-Fender | seanbright: 800$B |
| 23:15.01 | [TK]D-Fender | seanbright: And thats just phase 1. |
| 23:16.09 | seanbright | [TK]D-Fender: 700B... 800B... what's the difference |
| 23:16.18 | jaytee | I want all the banks and credit card companies to forgive my debt. "Hey, what can I say? I fucked up!" "Aw, no problem there. We know how it is. Sure, you're forgiven and while we're at it we're gonna give you an extra 10K we just printed up and a free set of steak knives" |
| 23:16.19 | [TK]D-Fender | seanbright: 100$B ;) |
| 23:16.56 | seanbright | [TK]D-Fender: touche |
| 23:23.55 | Madkiss | tryggvib: a german state bank just transferred 500 millions of euros over to Lehman Brothers the morning they officially went bankrupt |
| 23:24.25 | tryggvib | hehe |
| 23:25.07 | *** join/#asterisk sucituanbo (n=free@c-24-21-121-148.hsd1.wa.comcast.net) |
| 23:25.12 | tryggvib | here in Iceland one company (owned by one rich Icelander) bought shares for 6 billion icelandic krónas two days before the icelandic government bought 75% of the stocks |
| 23:25.15 | Madkiss | tryggvib: official reason: "Ahum, well, yeah, there was this order to transfer the money, and it was scheduled for monday morning, and actually, no manager was around on the weekend to cancel it" |
| 23:25.31 | tryggvib | when asked about it the rich guy said... well you win some you lose some... like nothing happened |
| 23:25.44 | tryggvib | lol |
| 23:26.08 | Madkiss | tryggvib: "so we just ... did it anyway. like ... 500 millions. who cares?" |
| 23:26.19 | tryggvib | we've got plenty |
| 23:26.21 | tryggvib | :) |
| 23:28.53 | tryggvib | just so those who helped me know... thanks to you I've got everything working |
| 23:29.33 | tryggvib | I'll buy you beer if I happen to be in your town (given that we meet) |
| 23:32.40 | cesal | has someone use .net libraries for asterisk |
| 23:32.42 | cesal | ? |
| 23:33.20 | seanbright | how many times are you going to ask that question? |
| 23:34.50 | seanbright | cesal: ? |
| 23:35.04 | cesal | until find someone |
| 23:35.10 | cesal | :P |
| 23:35.18 | seanbright | what is your actual question? |
| 23:35.26 | seanbright | which .net library to use? |
| 23:35.33 | cesal | how to use them |
| 23:35.36 | pcrane | tryggvib: where are you in the world? |
| 23:35.55 | seanbright | cesal: do you know how to program with .net? c# or vb.net? |
| 23:36.13 | tryggvib | pcrane, Iceland |
| 23:36.18 | pcrane | heh |
| 23:36.19 | pcrane | I'm in NZ |
| 23:36.44 | pcrane | it'd be one helluva expensive beer if I were to fly to iceland for it :p |
| 23:36.51 | tryggvib | pcrane, well I'll be in Hawaii after about 1 week and stay there until Christmas |
| 23:36.52 | tryggvib | :) |
| 23:36.57 | pcrane | nice |
| 23:37.10 | tryggvib | if anyone is in San Fransisco I'll be there for two days |
| 23:37.31 | tryggvib | I'm going to the Free culture conference in Berkeley |
| 23:37.58 | *** join/#asterisk coppice (n=chatzill@33.155.17.210.dyn.pacific.net.hk) |
| 23:38.00 | *** join/#asterisk LemensTS (n=matthew@adsl-70-238-160-24.dsl.stlsmo.sbcglobal.net) |
| 23:39.03 | LemensTS | I need to use some wireless headsets on a pbx. I see with some snom phones, you can plug in a wireless headset dongle to the phone, and the headset will work as that phones extension. I usually use polycom phones, i dont see where they can do this. Any input on this? |
| 23:40.31 | Sedorox | plantronic wireless headsets will work with anything that has a handset, if you get the right adapter and such |
| 23:40.56 | *** join/#asterisk beek (n=klinebl@65.211.106.242) |
| 23:41.15 | LemensTS | is that the one that lifts the headset reciever |
| 23:42.16 | *** join/#asterisk JohnnyBeGood (n=JohnnyBe@c-24-17-70-214.hsd1.wa.comcast.net) |
| 23:43.09 | *** join/#asterisk drumkilla (n=russell@asterisk/digium-open-source-team-lead/russellb) |
| 23:43.09 | *** mode/#asterisk [+o drumkilla] by ChanServ |
| 23:43.16 | LemensTS | http://www.plantronics.com/north_america/en_US/products/office/wireless-headsets/voyager-510-usb |
| 23:43.31 | LemensTS | they could actually just use a softphone...hmmm.. |
| 23:44.12 | Sedorox | LemensTS: the one I was thinking of, yes.. but that could work too |
| 23:44.50 | *** join/#asterisk adr3nalin3 (n=afink@asa.redglaze.com) |
| 23:46.47 | *** join/#asterisk comfrey (n=comfrey@dsl-66-78-76-161.ipns.com) |
| 23:47.04 | comfrey | i am getting an error running zapconf |
| 23:47.10 | comfrey | unknown default zaptel signalling for chan Zaptel::Chans=HASH(0x68d870) type PRI at /usr/sbin/zapconf line 169. |
| 23:47.31 | comfrey | odd. |
| 23:48.00 | cesal | asterisk can be install in windows? |
| 23:48.34 | WimpMan | cesal: You have been told so. |
| 23:48.47 | cesal | i am asking |
| 23:49.19 | tzafrir_laptop | comfrey, what version of zaptel? |
| 23:49.32 | WimpMan | cesal: Do you want to know or do you just like asking? |
| 23:50.17 | comfrey | tzafrir_laptop: zaptel-1.4.12.1 |
| 23:50.54 | tzafrir_laptop | comfrey, could you please pastebin cat /proc/zaptel/* #? |
| 23:51.56 | cesal | wanna know |
| 23:51.57 | cesal | ok |
| 23:52.29 | WimpMan | cesal: Then try to read what people answer. |
| 23:53.30 | tryggvib | well, thank you all for your help... tryggvib owes his helpers beer :) I'm off to bed |
| 23:53.58 | comfrey | tzafrir_laptop: http://pastebin.com/m3240c9f4 |
| 23:53.59 | tzafrir_laptop | comfrey, what device do you have? |
| 23:54.04 | comfrey | a101 |
| 23:54.06 | comfrey | sangoma |
| 23:54.43 | LemensTS | What do you guys think about snom phones> |
| 23:54.47 | comfrey | although lspci shows it as an A200 |
| 23:55.06 | comfrey | 06:00.0 Network controller: Sangoma Technologies Corp. A200/Remora FXO/FXS Analog AFT card |
| 23:55.58 | WimpMan | LemensTS: I very much like my 360. |
| 23:56.07 | *** join/#asterisk mog (n=mog@c-68-62-219-86.hsd1.al.comcast.net) |
| 23:56.07 | *** mode/#asterisk [+o mog] by ChanServ |
| 23:56.10 | WimpMan | Second best to my Eurit 40. |
| 23:56.55 | *** join/#asterisk Carlos_PHX (n=Carlos@ip68-3-162-244.ph.ph.cox.net) |
| 23:57.03 | WimpMan | The Snom has excellent audio quality and you can configure round about everything. |
| 23:58.06 | [TK]D-Fender | Snom... meh |
| 23:59.02 | tzafrir_laptop | comfrey, did it generate a partial /etc/zaptel.conf ? if so: could you please pastebin it? |
