| 00:00.11 | jaytee | beek, ah! I'm sharing using Cisco Catalyst switches configured with the ports on the switch configured for 802.1Q trunking and the phones are in their own VLAN. |
| 00:00.14 | harry_v | beek, well depends. some dont recomend sharing same lan network but in my case, both my phones and data are on same lione. Even with heavy vidio it does not affect voice quality. |
| 00:00.19 | *** join/#asterisk jcollie (n=jcollie@fedora/jcollie) |
| 00:01.20 | harry_v | Site survey of port avaiability and type of switch will detirmine if a new switchis needed or not. |
| 00:01.22 | beek | harry_v: Your's is just "best effort" then. Jaytee -- that sounds like what I'm going to be getting into in a couple of weeks at another site. |
| 00:01.41 | beek | harry_v: That seems to work well in many cases. |
| 00:02.02 | beek | CRAP!!!!! I just looked at the clock and I'm late for an appointment. Gotta run. Have a good night guys. |
| 00:02.03 | jaytee | with 100MB links to the phones/desktops and a gigabit backbone bandwidth is hardly and issue, especially since I'm averaging about 10 to 15 concurrent calls at peak. |
| 00:02.24 | jaytee | nite beek, drive careful! |
| 00:02.29 | harry_v | kinda sucks to propose a bid, then your offered the bid and find out no more ports left ;) |
| 00:02.47 | *** join/#asterisk petchaw (i=ae308e94@gateway/web/ajax/mibbit.com/x-43aea499963e95fa) |
| 00:02.52 | jaytee | harry_v, sounds like a poor job of a site survey |
| 00:02.52 | harry_v | so 100 MB per port |
| 00:03.08 | harry_v | jaytee, no im hypothisizing one |
| 00:03.16 | jaytee | ah |
| 00:03.26 | harry_v | I never have done a site survey without look at the switches |
| 00:03.55 | harry_v | once walked to the BAY because a customer wante a new drop to the pos. Isaid crap, no more ports ;) |
| 00:04.31 | harry_v | general rule, ports can not exceed 75% before a new one is ordered. but that is there policy ;) |
| 00:05.42 | *** join/#asterisk Maliuta (n=scooby@kiev.lusan.id.au) |
| 00:05.59 | harry_v | jaytee, you work for a company right? |
| 00:06.23 | jaytee | um, yeah |
| 00:06.35 | harry_v | how is the economy affecting your company? Ive been calling companies left and right and most are slow. |
| 00:07.17 | harry_v | two major companies down the hill from me are Boeing contractors here in Canada |
| 00:07.56 | jaytee | harry_v, we're a non-profit zoo that depends on sales of annual memberships, individual one time ticket sales and contributions from businesses and private donors. Take a wild guess how business is. |
| 00:08.32 | harry_v | cool |
| 00:08.58 | harry_v | ohhman i would love to work at a zoo. have a cirtain love of animals ;) |
| 00:09.15 | harry_v | im sure sales are really down. |
| 00:09.17 | jaytee | cool? hardly! donations are down big time. A rich person's wallet in a recession is tighter than an 8 year old virgin's vagina. |
| 00:09.29 | harry_v | I know |
| 00:09.44 | jaytee | and that's speaking strictly hypothetically, of course! |
| 00:10.01 | harry_v | Part of that money is going into gold at the present. Its at 970 a oz |
| 00:10.42 | harry_v | jaytee, sounds like your zoo needs to get creative. mabey rent some space for some other use |
| 00:10.55 | jaytee | when I bought 14K casting grain back in 2000-2001 for jewelry making it's based on the spot price when I put in an order and back then it was 225.00 an oz. |
| 00:11.24 | *** join/#asterisk cheGGo (n=cheGGo2@dslb-088-069-027-222.pools.arcor-ip.net) |
| 00:11.26 | carrar | jaytee, do they let you our of your cage? |
| 00:11.28 | *** join/#asterisk axisys (n=axisys@ip68-98-177-71.dc.dc.cox.net) |
| 00:11.32 | carrar | our=out |
| 00:11.37 | jaytee | harry_v, we have facilities for rental spaces for weddings, special functions, etc. and we have a large capital reserve. |
| 00:11.49 | harry_v | good deal |
| 00:12.00 | jaytee | carrar, only on the weekends so they can clean it. |
| 00:12.06 | carrar | haha |
| 00:12.46 | jaytee | the bars on the glassless window of our server room are just wide enough to fling feces through at the people walking by. |
| 00:12.56 | harry_v | I once saw a chimpanze pull up the other one by the legs and push him forward like a broom pushing all the hay to the side. |
| 00:13.48 | jaytee | I've actually had african elephants take a dump and a piss right in front of the steps to my office as they were walked on the access road. |
| 00:14.29 | jaytee | I got to ride one once. my legs and hips were sore for 3 days afterwards. |
| 00:14.51 | harry_v | haha |
| 00:15.21 | harry_v | why was it like ridding in a truck with no springs? |
| 00:15.23 | jaytee | like trying to ride two full grown horses side by side at the same time straddling both of them |
| 00:15.37 | harry_v | yea, the splits |
| 00:15.44 | jaytee | stretches the old thigh muscles and puts a hell of a strain on the hips. |
| 00:16.16 | harry_v | so did you walk like a bow legged joe for those few days? |
| 00:16.34 | harry_v | :) |
| 00:16.59 | jaytee | I think I know how Jean Claude Van Damme felt in Kickboxer after he's been stretched between two trees |
| 00:17.14 | jaytee | yeah, bow legged and hunched over |
| 00:18.10 | harry_v | :) |
| 00:19.28 | *** join/#asterisk sortudo (i=Sortudo@189.0.143.80) |
| 00:20.44 | sortudo | Please, does anyone knows if there is any room about free voip services, to make international calls? |
| 00:21.26 | harry_v | I personally do not know anyone who would sell free calls if thay have zero operating expenses. |
| 00:22.47 | sortudo | i need a servoce like voipuser.org becouse it is not working for me any more. |
| 00:23.21 | sortudo | service* |
| 00:24.06 | harry_v | who are you tring to call overseas |
| 00:24.37 | harry_v | jaytee, how is your sed and bash scripting skills? |
| 00:24.53 | sortudo | i am trying to call from brazil to brazil |
| 00:25.18 | harry_v | for the same number or all different numbers? |
| 00:25.38 | harry_v | and how many active calls at the same time? |
| 00:25.51 | jaytee | harry_v, I've managed to get by with em. why? |
| 00:26.19 | *** join/#asterisk stevetotaro (n=Steve@pool-72-72-143-197.hrbgpa.dsl-w.verizon.net) |
| 00:26.42 | harry_v | okay, I know who to turn to for sed or some bash. In fact, im trying to create a simple one that will switch off the incmming ivr and just ring the main phone direct. |
| 00:27.22 | jaytee | harry_v, why use a script for that? |
| 00:27.33 | harry_v | is there another way of doing it/ |
| 00:27.34 | jaytee | is the main phone on *? |
| 00:27.58 | harry_v | one is analog on a ata and other polycom |
| 00:28.14 | jaytee | that doesn't answer my question now does it? |
| 00:28.18 | harry_v | anlog is main. its the loudest and two of them on same channel |
| 00:28.45 | jaytee | both are lines on your asterisk system, yes? |
| 00:28.50 | harry_v | yes |
| 00:29.19 | jaytee | so you'd like to be able to turn off the IVR and have calls go to a specific line when the IVR is turned off? |
| 00:29.27 | harry_v | yes |
| 00:29.31 | *** join/#asterisk Khratos (n=Khratos@190.80.194.169) |
| 00:29.56 | *** part/#asterisk korihor (n=korihor@200.44.218.45) |
| 00:30.33 | *** join/#asterisk bminish (n=bminish@rb.brenbox.home.minish.org) |
| 00:32.08 | jaytee | use a binary flag in the astdb and just use a GotoIf against a variable that stores what the flag is set to in the astdb and setup an extension macro with a simple 2 choice menu to press one to turn the IVR on or 2 to route calls to your number and in that extension macro have it change the value of the binary flag in the astdb. |
| 00:33.02 | jaytee | hang on a second |
| 00:33.31 | harry_v | never done that before. |
| 00:33.42 | harry_v | but I think I know what you are talking about. |
| 00:35.25 | carrar | falls off the edge as he's not able to hang on that long |
| 00:36.51 | harry_v | carrar, what kind of shape you in? |
| 00:37.07 | carrar | above avg |
| 00:37.36 | carrar | I excersize |
| 00:37.56 | rene- | do u exercise ? |
| 00:38.17 | harry_v | yes |
| 00:38.50 | harry_v | like climbing? Im going to take on the chief this summer. It does not look to hard. This is the back face of it. |
| 00:38.54 | harry_v | http://www.youtube.com/watch?v=xx09_sh_nFE |
| 00:39.40 | rene- | wow that must be pretty cool |
| 00:39.48 | rene- | we dont have mountains where i live |
| 00:40.11 | drmessano | Where I come from, mountain is a verb |
| 00:40.23 | harry_v | front face, have to be a mountain climber with ropes. I actually hiked to the base of the chief. Being the second largest monolith granite wall in the world, had a hard time locating the climbers looking up. looked like pencil points they were so high up :) |
| 00:40.35 | jaytee | harry_v, check out this section of my IVR, http://pastebin.ca/1343314 |
| 00:40.36 | rene- | scary |
| 00:40.51 | rene- | i am intrigued by those guys who climb bare hand |
| 00:41.09 | harry_v | rene, adrenalin rush;) |
| 00:41.31 | eppigy | hello |
| 00:41.43 | drmessano | HI DAVE |
| 00:41.45 | eppigy | :D |
| 00:41.46 | rene- | scary stuff too, where i live i get my fix with windsurf, i am no pro but when going on a plane you get to to -very- fast |
| 00:41.48 | harry_v | Yes, lots of "boldering at the base of the chief. I climbed on bolders as big as a two story house. but others 5-8 feet tall |
| 00:42.00 | rene- | hehe scary |
| 00:42.04 | rene- | surely it is pretty cool |
| 00:42.12 | harry_v | the boldering is awsome. |
| 00:42.24 | drmessano | jaytee is into extreme rollerskating |
| 00:42.39 | eppigy | I woudl rather just go to south america and work as a merc for a week |
| 00:42.47 | harry_v | its a huge work out going up then down and around to the next bolder. I was out of breath keeping up with the 10 year olds. |
| 00:42.47 | jaytee | harry_v, and this is the macro I dial to set the binary flag to either a 1 or a 2. Not really a "binary" flag but you get the idea. |
| 00:42.52 | drmessano | He puts on a glitter suit and rainbow laces and races through the ghetto at 4am on a friday night |
| 00:42.52 | jaytee | http://pastebin.ca/1343319 |
| 00:43.11 | jaytee | drmessano, I want you! I want you now! |
| 00:43.21 | rene- | wow extreme rollerskating |
| 00:43.33 | drmessano | lol |
| 00:43.56 | *** join/#asterisk erth64net (n=erth64ne@69-30-67-191.dq1sn.easystreet.com) |
| 00:44.02 | drmessano | I used to be into the martial arts.. I have a brown belt in Pad Thai |
| 00:44.38 | rene- | cool |
| 00:45.00 | jaytee | I climbed Mt. Hood, Pike's Peak (the easy side) and several smaller mountains in the Cascades. |
| 00:45.54 | drmessano | I married a redhead once |
| 00:46.20 | drmessano | Thats "extreme" |
| 00:46.28 | jaytee | that's as adventurous as I've ever gotten except I skydived twice on static line and once on freefall |
| 00:46.36 | Talkradio | redheads are hot |
| 00:46.49 | *** join/#asterisk minotaur01 (n=test@dhcp-0-13-46-41-d9-29.cpe.mountaincable.net) |
| 00:46.50 | jaytee | drmessano, did I ever tell you I used to be a redhead when I had hair? |
| 00:46.59 | drmessano | Redheads are dangerous as shit |
| 00:47.08 | Talkradio | :) |
| 00:47.09 | drmessano | jaytee: I didnt know that |
| 00:47.37 | jaytee | we ginger kids are basically all insatiable and wild |
| 00:47.41 | drmessano | Redheads possess every recessive psycho gene available to womenkind |
| 00:48.17 | jaytee | let's not be gender specific! I know several ways to torture and castrate. |
| 00:48.18 | drmessano | Scorn a brunette: SHe goes home and pouts eating ice cream |
| 00:48.27 | *** join/#asterisk minotaur01 (n=test@dhcp-0-13-46-41-d9-29.cpe.mountaincable.net) |
| 00:48.44 | drmessano | Scorn a redhead: She goes home, gets an ice cream scoop, and smashes your windows with it, carving her name in the side of your car |
| 00:48.47 | carrar | hiking rocks! |
| 00:48.49 | jaytee | Scorn a blonde and she's in the sack with someone else by 9:30pm and doesn't care a bit. |
| 00:49.06 | *** join/#asterisk stuffcorpse (n=rick@121.98.136.241) |
| 00:49.07 | carrar | I've done a few hikes: http://pics.osburn.com/tree/229/ |
| 00:49.14 | harry_v | vancouver is now paying the price for the olympics. What was originally going to cost 600 million is now 6 billion dollars. |
| 00:49.18 | eppigy | i keep reading hikes as kikes |
| 00:49.31 | eppigy | tells you about the subject matter of the other channels I idle in |
| 00:49.45 | harry_v | dont vote for for the olympics if you want to pay taxes on it for the next 20 years. |
| 00:50.36 | harry_v | Olympics are only for cities that already HAVE infrastructure. We will never recoup the cost. |
| 00:50.43 | drmessano | Iulia isn't wearing a bra.. Just FYI |
| 00:50.50 | harry_v | who is that? |
| 00:51.12 | carrar | Romanian wife? |
| 00:51.37 | jaytee | carrar, there's a nice easy climb in Southern Oregon called Pilot Rock right on the border with Cali. On the top of the rock on the south side you're in Cali and on the north you're in Oregon. Great view of Mt. McGloughlin to the NE and Mt Shasta to the S-SE. |
| 00:52.06 | carrar | thats a long ways to go for a hike! |
| 00:52.22 | drmessano | Shasta is soda for losers |
| 00:52.32 | jaytee | eppigy, stop hanging out in nazi and skinhead channels, it's bad for the soul if you still have one. |
| 00:52.52 | eppigy | soul...? |
| 00:52.53 | jaytee | carrar, it used to be in my "backyard" |
| 00:52.55 | eppigy | D: |
| 00:53.08 | jaytee | http://dudeism.com |
| 00:53.26 | drmessano | OH HELL YESH |
| 00:54.02 | jaytee | danny, this was waiting for me when I got home today :-) http://www.rock-n-roll-action-figures.com/20sdexbiglea.html |
| 00:54.22 | drmessano | AWESOME!!!! |
| 00:54.27 | carrar | This is hiking: http://pics.osburn.com/photo/10932/original |
| 00:54.44 | rene- | when is canada getting the olympic games |
| 00:55.07 | drmessano | Even has the white russian |
| 00:55.16 | jaytee | the rug really brings the whole room together :-) |
| 00:56.19 | jaytee | I may get the Walter one where he's in bowling attire |
| 00:56.22 | drmessano | They have Walter too!!! |
| 00:56.36 | drmessano | Nihilists, Donnie |
| 00:56.50 | jaytee | and Donny is supposedly coming soon (but who cares? STFU, Donny!" |
| 00:57.09 | drmessano | You're out of your element |
| 00:57.15 | jaytee | hehehee |
| 00:57.25 | drmessano | I use "Mark it Zero" at work |
| 00:57.37 | drmessano | Whenever someone messes something up |
| 00:57.42 | drmessano | "MARK IT ZERO" |
| 00:57.54 | drmessano | HE WAS OVER THE LINE |
| 00:58.03 | jaytee | "nobody fucks with the Jesus, man!" |
| 00:58.12 | harry_v | so exlain macro status and ivr top. Is the ivr for incomming calls from zap? |
| 00:58.13 | drmessano | I dont roll on Shabbas |
| 00:58.40 | drmessano | What a fucking brilliant, underated movie |
| 00:58.44 | jaytee | harry_v, sort of. My IVR server is connected to my primary * server via an IAX2 trunk |
| 00:58.56 | harry_v | ahh |
| 00:58.56 | jaytee | calls come in and out of my facility via PRI |
| 00:59.12 | drmessano | YOURE ENTERING A WORLD OF PAIN |
| 00:59.26 | eppigy | 8[] |
| 00:59.27 | jaytee | that was one of John Goodman's best roles |
| 00:59.42 | jaytee | that and Al The Pal in Always |
| 00:59.43 | *** join/#asterisk thansen (n=thansen@c-76-27-110-194.hsd1.ut.comcast.net) |
| 00:59.51 | drmessano | jaytee: What does the dude do? (I dont mean employment-wise, fill in the blank) |
| 01:00.04 | jaytee | he abides, of course |
| 01:00.09 | drmessano | I WANT YOU.. NOW |
| 01:00.13 | path_ | :-) |
| 01:00.15 | jaytee | hahahahaaha |
| 01:00.22 | harry_v | sounds like a drill sargent |
| 01:00.48 | drmessano | Thats like my friggin mantra |
| 01:01.26 | jaytee | "There's just one thing I've got to ask you, Dude. Do you have to cuss so much?" "What the fuck are you talking about, man?" |
| 01:01.44 | *** join/#asterisk C4colo (n=DJpyro@66.185.111.33) |
| 01:02.30 | drmessano | John Goodman was awesome in that movie.. but who knew Jeff Bridges had that movie in him? |
| 01:02.40 | jaytee | The Big Lebowski has become one of my all time 3 favorite movies. |
| 01:02.40 | C4colo | anyone know what would cause memory corrupted errors such as "asterisk: double free or corruption (out)" or "asterisk: corrupted double-linked list" when someone tries to page? |
| 01:02.42 | drmessano | He's a good actor, but that was such a brilliant role |
| 01:02.56 | harry_v | talking about drill sargents I was in the AF at one time. In the barricks we had a blue rope TI. In army thay call them drill sargents. Well this one was huge. He comes in and says :Airman, I want you to goto Dorm B1 and B2 and tell them to goto Dorm B3. This young airman who looks like the late acros marty feldman with these big eyes replies "Huu?" then he yells at him again but this time MUCH louder. You should have seen his eyes al |
| 01:02.56 | harry_v | most poped out ofhis head :) |
| 01:03.05 | jaytee | Casablanca, The Big Lebowski and WALL-E. |
| 01:03.11 | C4colo | I've seen crashes like this related to other issues too, this only happens when the Page() application is used with three or more extensions to page |
| 01:03.15 | drmessano | I need to see Wall-E.. |
| 01:03.37 | jaytee | it's really cute |
| 01:03.50 | drmessano | I think my top 3 are Die Hard, A Big Hand for a Little Lady, and Big Lebowski |
| 01:03.51 | jaytee | harry_v, 3708 BMTS |
| 01:03.59 | harry_v | 3711 bmts |
| 01:04.00 | harry_v | :) |
| 01:04.05 | harry_v | cool! |
| 01:04.06 | C4colo | asterisk 1.4.23.1 |
| 01:04.09 | jaytee | right on, brutha! |
| 01:04.14 | harry_v | when did you serve? |
| 01:04.23 | jaytee | 75-79 |
| 01:04.28 | harry_v | 80s for me ;) |
| 01:04.35 | jaytee | 30750 |
| 01:04.46 | drmessano | jaytee is old.. he's like my perverted uncle "grabby" |
| 01:04.51 | jaytee | Keesler? |
| 01:04.58 | harry_v | 375 cannot recall the rest of my AFSC :) sikorsky mechanic |
| 01:05.14 | harry_v | sheppard |
| 01:05.22 | jaytee | ah |
| 01:05.37 | harry_v | man, basic is such a shock to a teenager |
| 01:05.38 | drmessano | I saw Navy Seals like 6 times.. does that count? |
| 01:05.46 | *** join/#asterisk jjshoe_ (i=jjshoe@CPE-69-23-96-210.new.res.rr.com) |
| 01:05.55 | harry_v | I worked with navy seals dr ;) |
| 01:06.05 | drmessano | You met Charlie Sheen? |
| 01:06.07 | harry_v | Actually watch them do there work on my aircraft |
| 01:06.09 | drmessano | YOU ROCK |
| 01:06.38 | jaytee | I did tech school at Keesler and my permanent party base was Tinker AFB in Oklahoma City. Did a 90 day TDY at Norad, Cheyenne Mountain and another one at Elmendorf in Anchorage,AK |
| 01:06.49 | harry_v | talk about code of silence. I asked them some questions and it was as if I was a ghost as thay huridly did there things to prepare. |
| 01:07.11 | harry_v | kirtland here |
| 01:07.15 | jjshoe_ | anyone know why I would get a 404 on this? http://pastebin.ca/1343341 |
| 01:07.38 | harry_v | the technoligy in the millitary is great |
| 01:08.04 | harry_v | of course, the navy training in electronics is the best |
| 01:08.14 | [TK]D-Fender | jjshoe : Dialplan error, just like it says |
| 01:08.20 | jaytee | jjshoe, well, looks to me like dynamic dns is involved so if the address changed, guess what? 404=NOT FOUND |
| 01:09.52 | [TK]D-Fender | jaytee: nope. |
| 01:10.15 | kb3ien | [TK]D |
| 01:10.22 | jaytee | [TK]D-Fender, where does it "say" dialplan error? |
| 01:10.29 | kb3ien | [TK]D-Fender: i did find the problem last night btw, |
| 01:10.56 | jjshoe_ | extension to extension calls |
| 01:10.57 | [TK]D-Fender | jaytee: You didn't look at WHAT it was 404-ing |
| 01:11.56 | harry_v | Here is what we installed on our pavehawks. drmessano, dont think you would want to mess with this aimrnan she looks ready for a sar gunnery mission ;) http://www.warbirdbrewing.com/home/images/Miss_America_compressed.jpg |
| 01:12.35 | *** join/#asterisk andresmujica (n=andresmu@ubuntu/member/andresmujica) |
| 01:12.47 | jaytee | [TK]D-Fender, aha! looking for 301 in from_internal |
| 01:12.53 | drmessano | Shes probably single.. I prefer married women |
| 01:13.01 | *** join/#asterisk cguerrero (n=cguerrer@200.34.66.137) |
| 01:13.17 | *** join/#asterisk RobertLaptop (n=rmiddle@96.244.48.200) |
| 01:13.33 | harry_v | biggest weapon I have ever fired was the M-60 but nothing like a minigun |
| 01:14.09 | jaytee | I got to pull the lanyard on a 155mm howie |
| 01:14.32 | jaytee | that'll give ya wood! |
| 01:16.56 | harry_v | i still have my blues |
| 01:17.30 | jaytee | I can't remember what i did with mine. probably tossed em |
| 01:17.50 | harry_v | yea :) |
| 01:17.55 | carrar | Biggest weapon? |
| 01:18.02 | carrar | I've ridden airplanes! |
| 01:18.25 | harry_v | lets see |
| 01:18.43 | carrar | http://pics.osburn.com/photo/1528/original |
| 01:19.09 | [TK]D-Fender | carrar: I've ridden a PLANET. |
| 01:19.17 | carrar | got me topped |
| 01:19.29 | carrar | BUT |
| 01:19.33 | carrar | was it a weapon |
| 01:19.47 | harry_v | C-130,C-141,C-5,DC-9,nightinggale, VIP apache, H-3,H-53. pretty much it. |
| 01:20.04 | harry_v | I thoght the ride on a C-5 was interesting. |
| 01:20.20 | jaytee | god, that plane |
| 01:20.23 | [TK]D-Fender | fires up his planetary collider |
| 01:20.34 | jaytee | it always feels like it should be falling like a rock |
| 01:20.41 | kb3ien | does asterisk have some means to report packet losses in the rtp streams? |
| 01:20.49 | carrar | YES |
| 01:21.01 | harry_v | whitnessed a F-4 landing gear collapse and going up in flames as it went down the runway |
| 01:21.02 | harry_v | ;) |
| 01:21.11 | jaytee | oooh |
| 01:21.29 | jaytee | I used to love watching them take off at night with full afterburners |
| 01:21.30 | carrar | ${CHANNEL(rtpqos,audio,all) |
| 01:21.58 | *** join/#asterisk coppice (n=chatzill@126.168.17.210.dyn.pacific.net.hk) |
| 01:21.59 | carrar | } |
| 01:22.20 | harry_v | same here. you knew when those figthters were consuming the entire lengthof the runway it was going to be a pure verticle lift to 10k feet in seconds. |
| 01:22.59 | harry_v | I have to share some more stories with you some time ;) |
| 01:23.09 | harry_v | the action dangers and death. |
| 01:23.38 | harry_v | I will try this dial plan when i get back. get some thing to eat. |
| 01:23.57 | jaytee | F4's could only handle pure vertical for a brief period then had to reduce climb angle. F16 was and I think still is the only plane that can actually accellerate in a straight vertical |
| 01:24.32 | jaytee | although the F22 Raptor may have stolen that trophy away |
| 01:25.18 | coppice | I've watched F14 and F15 stop vertically, put on full power, and go up into the clouds |
| 01:25.44 | *** part/#asterisk macli (n=macli@nmc.brc.ubc.ca) |
| 01:25.52 | jaytee | but not accellerate vertically |
| 01:26.35 | coppice | if they are vertical, reduce their speed to zero, and then put on power to get to the clouds, how are they not accelerating? |
| 01:27.27 | jaytee | straight vertical? |
| 01:27.44 | coppice | yep. it used to be a regular stunt at airshows in the 70s |
| 01:27.54 | jjshoe_ | darn.. something's broke, show dialplan doesn't return nearly enough data |
| 01:28.25 | jaytee | I know a 16 can do it but the 15 is too heavy for the amount of thrust the powerplant puts out |
| 01:28.35 | coppice | of course, they only have a light load while doing that, but all impressive specs for fighters are based on non-battle configs :-) |
| 01:28.48 | jaytee | and the 14 while having some nice features was a wallowing pig in comparison to either of the other two. |
| 01:29.08 | coppice | of course, several Russian planes can also do it |
| 01:34.06 | *** join/#asterisk Jacke (i=jacke@isup.ss7.pl) |
| 01:35.43 | *** join/#asterisk andresmujica1 (n=andresmu@ubuntu/member/andresmujica) |
| 01:37.21 | *** join/#asterisk joat (n=joat@ip70-174-79-200.hr.hr.cox.net) |
| 01:39.39 | *** join/#asterisk ingenius (n=alektro@host251.190-31-44.telecom.net.ar) |
| 01:42.48 | *** join/#asterisk tk8 (n=Bryan_Ru@c-68-83-22-225.hsd1.nj.comcast.net) |
| 01:42.58 | tk8 | sup everybody |
| 01:43.22 | tk8 | i wanted to know what i should look into to make asterisk act as an automatic dialer |
| 01:43.24 | *** join/#asterisk imcdona (i=imcdona@c-24-17-45-79.hsd1.wa.comcast.net) |
| 01:43.55 | imcdona | If I iniate a call through the manager API, it rings for a period of time and then hangs up. it doesn't go to the callers voicemail |
| 01:44.07 | *** join/#asterisk ingenius (n=alektro@host251.190-31-44.telecom.net.ar) |
| 01:44.13 | imcdona | any idea's on why this is happening? I can see that astrisk is sending a cancel to the sip provider |
| 01:44.47 | minotaur01 | tk8: look in to call file |
| 01:44.51 | minotaur01 | files |
| 01:44.59 | minotaur01 | .call |
| 01:45.22 | imcdona | I Will do that to test. that is a good idea. but still...why the hangups with the API? |
| 01:45.30 | tk8 | minotaur01: thanks i will |
| 01:45.31 | imcdona | no pun intended |
| 01:45.54 | minotaur01 | you can't also look into a click2call script |
| 01:46.10 | *** join/#asterisk dgoner (n=david@mx1.repairpc.net) |
| 01:49.56 | *** join/#asterisk propellerhead (n=yogurt2u@200.43.87.124) |
| 02:04.20 | *** join/#asterisk Magicblaze007 (n=sony@fl-67-233-192-118.dhcp.embarqhsd.net) |
| 02:07.19 | Magicblaze007 | I was talking to a voicepulse representative today and his connection was not very good...the voice got cut a few times. Which is the best voip provider as far as voice quality is concerned? |
| 02:07.51 | Magicblaze007 | is there a review somewhere of voip providers and their voice quality/reliability? |
| 02:08.31 | *** join/#asterisk andresmujica (n=andresmu@ubuntu/member/andresmujica) |
| 02:11.20 | *** join/#asterisk [intra]lanman (n=intralan@freeswitch/developer/intralanman) |
| 02:21.17 | carrar | VoIPreports.com |
| 02:21.19 | carrar | heh |
| 02:39.40 | Magicblaze007 | shows me a honda! |
| 02:40.57 | Magicblaze007 | what exactly is sip trunking? |
| 02:44.28 | *** join/#asterisk mazpe (n=mazpe@c-76-109-233-122.hsd1.fl.comcast.net) |
| 02:44.39 | harry_v | kind of sounds like octomom |
| 02:46.55 | *** join/#asterisk MmixX (n=mix@61.14.191.142) |
| 02:48.49 | *** join/#asterisk pdmmm (i=pdm@pdm.sh) |
| 02:48.58 | jaytee | Magicblaze007, http://tinyurl.com/czn69o |
| 02:53.10 | carrar | hrmm |
| 02:53.32 | jaytee | octothorpe is the name given to the # key on telephones by a Bell Labs employee in the 1960's. Most Americans refer to it as the "pound" key and in the UK or Europe it is commonly refered to as the "hash" key. |
| 02:53.56 | harry_v | thats strange jaytee, was that some kind of mov vidio? |
| 02:54.18 | jaytee | what? the tinyurl link? |
| 02:54.42 | harry_v | live stream |
| 02:54.45 | harry_v | interesting |
| 02:54.57 | jaytee | http://letmegooglethatforyou.com |
| 02:55.30 | jaytee | i just took the link that site generates and converted it to a tinyurl address. |
| 02:55.58 | jaytee | It's a fun way of saying, "Google is your friend, now go do your homework!" |
| 02:57.28 | harry_v | hehe |
| 02:57.36 | harry_v | ustream.tv interesting |
| 02:57.49 | harry_v | some day, passive tv will disapear |
| 02:59.04 | *** join/#asterisk CunningPike (n=arodgers@S01060014bf81366b.vc.shawcable.net) |
| 03:08.32 | *** join/#asterisk mog (n=mog@c-68-62-170-242.hsd1.al.comcast.net) |
| 03:08.32 | *** mode/#asterisk [+o mog] by ChanServ |
| 03:08.36 | mog | <PROTECTED> |
| 03:10.14 | *** join/#asterisk fakhir (n=fakhir@unaffiliated/fakhir) |
| 03:10.59 | *** part/#asterisk supjigator (n=shanebur@64.147.216.10) |
| 03:15.22 | *** join/#asterisk Maliuta (n=scooby@kiev.lusan.id.au) |
| 03:15.29 | mog | woot http://www.rfc-editor.org/authors/rfc5456.txt |
| 03:18.34 | mazpe | exten => 101,1,Dial(SIP/pete,10) should ring 10 seconds a move on right? |
| 03:20.28 | *** join/#asterisk Bonix (n=Bonix@200-195-41-212.isimples.com.br) |
| 03:22.05 | *** join/#asterisk MrNaz (n=mrnaz@ppp118-208-164-14.lns10.mel4.internode.on.net) |
| 03:24.09 | carrar | yes it will ring for 10 seconds |
| 03:24.25 | carrar | then move onto priority 2 if it exists |
| 03:25.45 | *** join/#asterisk double_cheesburg (n=chatzill@ip70-162-238-155.ph.ph.cox.net) |
| 03:26.03 | *** join/#asterisk moy (n=moy@CPE001cdfec4cee-CM00080dab8485.cpe.net.cable.rogers.com) |
| 03:31.02 | *** join/#asterisk fakhir (n=fakhir@unaffiliated/fakhir) |
| 03:40.15 | mazpe | carrar: for some reason is not working.. keeps ringing |
| 03:41.06 | mazpe | now it works |
| 03:41.08 | mazpe | sweet! |
| 03:43.08 | *** join/#asterisk russellb (n=russell@asterisk/digium-open-source-team-lead/russellb) |
| 03:43.08 | *** mode/#asterisk [+o russellb] by ChanServ |
| 03:44.33 | thehar | russellb: haiii |
| 03:45.10 | mazpe | whats average ring time? 25 seconds? |
| 03:46.36 | Qwell | mazpe: 4 cycles |
| 03:46.49 | russellb | thehar: hi2u2 |
| 03:46.54 | thehar | hehe |
| 04:00.31 | Micc | I can't find how to configure a polycom ip 450 by web browser. |
| 04:00.38 | Micc | Does it not have a web configuration? |
| 04:01.58 | *** join/#asterisk axisys (n=axisys@ip68-98-177-71.dc.dc.cox.net) |
| 04:04.26 | thehar | rages |
| 04:19.09 | *** join/#asterisk Maliuta (n=scooby@kiev.lusan.id.au) |
| 04:27.57 | drmessano | Ah shoot.. Kelly Groucutt of ELO died |
| 04:28.17 | Qwell | drmessano: you test it yet? |
| 04:28.29 | *** part/#asterisk shtoom (n=shtoom@121.246.167.147) |
| 04:31.29 | drmessano | No, downloaded.. need to burn and install.. hang on |
| 04:42.55 | *** join/#asterisk riddlebox (n=james@75-132-225-75.dhcp.stls.mo.charter.com) |
| 04:54.14 | *** join/#asterisk riddlebox (n=user@75-132-225-75.dhcp.stls.mo.charter.com) |
| 04:54.16 | kb3ien | i seem to have my findmefollow me working. need to start a wiki for this crap. hate wikis but it may be best. |
| 04:55.28 | kb3ien | when my astbox completes a call from my polycom to another sip host: is the pbx still in the rtp stream /ALWAYS/ ? |
| 04:55.28 | *** join/#asterisk stuffcorpse (n=rick@121.98.136.241) |
| 05:01.21 | *** join/#asterisk stuffcorpse (n=rick@121.98.136.241) |
| 05:03.17 | [TK]D-Fender | kb3ien: Depends on what you're doign |
| 05:03.19 | [TK]D-Fender | doing* |
| 05:04.06 | kb3ien | thats a resounding NO to allways, eh. figures. |
| 05:04.23 | [TK]D-Fender | kb3ien: it COULD be always for YOU, but that would depend on YOU |
| 05:04.51 | kb3ien | oh i found the typo that drove me to think that Dial envokes answer, although the voip-info page could be phrased better. |
| 05:05.26 | [TK]D-Fender | kb3ien: So aside from the fact your thought it always answer, what was the reason it actually was? |
| 05:05.49 | kb3ien | half the internet or more speaks english as a second languge. 90% if Drunk English in a separate language... |
| 05:06.08 | jql | i'm speaking that rite now |
| 05:06.58 | kb3ien | was returning MACRO_RESULT from a subsequent invocation of Dial(M()) badly. |
| 05:07.14 | coppice | half the internet is incapable of using english at all. of the rest, most use it as a second language |
| 05:07.50 | kb3ien | the find me follow me sorta works now, it calls my cellphone and tells me the call is from my cellnumber. but the displayed callerid is right. odd really. |
| 05:07.57 | [TK]D-Fender | kb3ien: M() sure makes it look like they answered anways |
| 05:08.30 | kb3ien | well i can subsequently call CONGESTION to overide that.... |
| 05:08.47 | japherwocky | everyone is philosophising on irc tonight |
| 05:08.58 | kb3ien | aparently, it works, what the hell. |
| 05:09.06 | jql | that's friday for you |
| 05:09.19 | [TK]D-Fender | Saturday here... |
| 05:09.22 | kb3ien | shoot its friday and IM SOBER!!! |
| 05:09.43 | japherwocky | maybe a little tispy |
| 05:09.50 | kb3ien | its "2409" ;) on friday night |
| 05:10.06 | japherwocky | 9p here |
| 05:10.11 | kb3ien | from the ppl who brought your "14h00 am" |
| 05:10.58 | [TK]D-Fender | kb3ien: .... doesn't work |
| 05:11.24 | kb3ien | inthe words of the virgin mary, come again? |
| 05:11.30 | kb3ien | what doest work? |
| 05:11.45 | [TK]D-Fender | kb3ien: French 24-hour time w/ mismatched and altogether unnecessary am/pm |
| 05:12.01 | kb3ien | French? |
| 05:12.17 | japherwocky | i thought that meant 2am after an all-nighter |
| 05:12.19 | *** join/#asterisk stuffcorpse (n=rick@121.98.136.241) |
| 05:12.26 | kb3ien | its no more french than english "14U00" beging the german. |
| 05:12.46 | kb3ien | its nice to have a 14h00 am, i can still get up in the morning! |
| 05:13.35 | kb3ien | Heur and Hour both "Hayches" (as the cockneys say) |
| 05:14.10 | kb3ien | Haytches? Hateches ? nvr mind. i'm going mental here. |
| 05:14.39 | [TK]D-Fender | kb3ien: Short trip :0 |
| 05:15.07 | kb3ien | hrm but the screnery cannot be beet! |
| 05:31.25 | *** join/#asterisk nima0102 (n=nima@91.98.219.178) |
| 05:36.06 | kb3ien | [TK]D-Fender still there? |
| 05:36.13 | [TK]D-Fender | yup |
| 05:36.46 | kb3ien | http://kb3ien.us/extensions.(conf|did) |
| 05:37.06 | kb3ien | it uses dial(M(mymacro)) |
| 05:37.27 | kb3ien | and mymacro controls if the inbound call gets answered (yet). |
| 05:38.38 | [TK]D-Fender | kb3ien: "did" doesn't do anything that I can see... |
| 05:39.03 | [TK]D-Fender | kbhowever I see a nifty flaw that should force an answer in there |
| 05:39.23 | kb3ien | extension.did is loaded into the inbound context and calls Dial(local/&SIP/) |
| 05:39.49 | kb3ien | even if my cell company tries to force me to use their Voicemail they need to generate DTMF to steal the inbound call. |
| 05:40.13 | *** join/#asterisk MindTheGap_ (n=MindTheG@189.59.204.179) |
| 05:40.23 | [TK]D-Fender | kb3ien: exten => 13475553400,n,Dial(Local/16465550246@pstn-shim/n&SIP/13475553400.1,50,Ttr); <- "r" |
| 05:41.11 | kb3ien | add some database calls to the Dial() and you got a push-my-calls, pull-my-calls setup going on. |
| 05:41.28 | kb3ien | i dont think the 'r' does anything special there does it? |
| 05:41.37 | kb3ien | maybe it does. Whats the flaw? |
| 05:41.52 | kb3ien | if there is a better practise i'm all for it. |
| 05:42.14 | [TK]D-Fender | kb3ien: r = answer the call and generate AUDIO ringing. |
| 05:42.31 | [TK]D-Fender | r= EVIL |
| 05:42.40 | [TK]D-Fender | typcially a shoot-on-sight offence |
| 05:42.54 | kb3ien | hrm, thats vestigial. i'm hoping.... |
| 05:44.53 | kb3ien | i concur its a shoot on site offense. it was greedy copy and paste im pressed for time. but its totally vestigial. |
| 05:45.39 | kb3ien | the code still works sans 'r'. one of the Ts is wrong too, for my designs. |
| 05:45.41 | Micc | Is there a setting in the polycom phones that makes it not full duplex? |
| 05:45.55 | Micc | When I talk it mutes the ear peice it seems. |
| 05:46.13 | kb3ien | normally its called Linksys... |
| 05:46.17 | jql | lol |
| 05:47.00 | jql | Micc: the sidetone volume is in the config file somewhere, but I don't think it's going to mute the other party by any normal mechanism |
| 05:47.14 | kb3ien | [TK]D-Fender is my aproach acceptable to you? |
| 05:47.36 | Micc | jql, hmm, I'll have to look into that. |
| 05:48.32 | [TK]D-Fender | kb3ien: Is it still always answering? |
| 05:49.01 | kb3ien | now it only answers when i pickup the polycom 13475553400.1 or press 1 on my cell. |
| 05:49.16 | *** join/#asterisk murdock_ut (n=chatzill@c-98-202-154-226.hsd1.ut.comcast.net) |
| 05:51.16 | kb3ien | my cell being the 646 number. |
| 05:51.37 | [TK]D-Fender | kb3ien: Ok, so it "works" |
| 05:52.01 | kb3ien | i'd like to pass additional arguments to pstn-shim somehow in the future. |
| 05:52.36 | kb3ien | it 'works' i didnt know if it embodied some other flaw i didnt pickup on. |
| 05:52.58 | kb3ien | the ,r was misleading. |
| 05:54.55 | kb3ien | i'm not keen on the Dial(M()) construct, i'd rather have an async dial() IE FORKING. |
| 05:55.14 | jql | I know what you mean. I had to write one of those once |
| 05:55.18 | jql | an AsyncDial() |
| 05:55.39 | kb3ien | how would it return values? shared memory space with the calling thread? |
| 05:55.44 | jql | the code's already there, since the manager interface allows it |
| 05:56.03 | kb3ien | well the local/ 'technology' is really the fork i guess. |
| 05:56.13 | jql | generally the spawning thread needs to wait |
| 05:56.20 | jql | playing peaceful music or whatnot |
| 05:56.33 | jql | then the spawned thread hijacks the original thread via AsyncGoto |
| 05:56.47 | kb3ien | thats not really what i want. i want it to get on with trying to find me! |
| 05:56.54 | jql | heh |
| 05:57.23 | jql | then yes, more along the lines of Local/ |
| 05:57.49 | kb3ien | can i pass variables or ARGx with local/ ? |
| 05:58.05 | jql | Set(__INHERITED_VARIABLE=foo) |
| 05:58.15 | jql | then all child calls can read ${INHERITED_VARIABLE} |
| 05:58.30 | kb3ien | just BEFORE calling dial(local/) ? |
| 05:58.32 | kb3ien | ah |
| 05:58.34 | *** join/#asterisk philippel (n=p_lindhe@pool-98-111-74-92.sttlwa.fios.verizon.net) |
| 05:58.35 | jql | yes |
| 05:58.48 | jql | single underscore goes to direct children, double-underscore goes to all descendants ever |
| 05:58.54 | kb3ien | may as well get it 'right' callerid(num) seems to contain the cellphones' DID. |
| 05:59.32 | kb3ien | is that passed by value or by reference, can i modify the variable, will the modifications be passed up the stack? |
| 05:59.44 | jql | by value |
| 05:59.58 | *** join/#asterisk ghento (n=ghento@d75-157-192-235.bchsia.telus.net) |
| 06:00.05 | jql | setting variables in other calls means you need to put the target ${CHANNEL} variable in an inherited variable as well |
| 06:00.08 | kb3ien | ok. good enough for my wants. |
| 06:00.28 | kb3ien | comeagain? |
| 06:00.45 | Micc | jql, your right. I think it was because I was talking between two phones in the same room with music on in the background. |
| 06:00.57 | Micc | jql, under normal operation it doesn't cut out. |
| 06:01.47 | kb3ien | what do i need to do with ${CHANNEL} ? |
| 06:02.09 | jql | you don't wanna go there |
| 06:02.23 | jql | but, you can read another channel's variable with ImportVar |
| 06:02.24 | kb3ien | dunno its cheeper than whiskey... |
| 06:02.31 | *** join/#asterisk mintos (n=mvaliyav@nat/redhat-in/x-83ea8182c23cbf8d) |
| 06:02.33 | kb3ien | AH. okay. |
| 06:02.38 | jql | as long as you know its name |
| 06:02.52 | kb3ien | so i can publish or pry, my choice. |
| 06:02.59 | kb3ien | i'll publish. |
| 06:03.00 | philippel | question - I'm on a system running 1.4.15, when two particiapnts enter the conference that is dynami using 'dMxw' options, they can hear the music but can still talk to each other, even though the marked 'moderator' has not joined yet. Does anyone know if this was a known issue before I just upgrade asterisk to see if related? Calls come in on a PRI |
| 06:03.22 | *** join/#asterisk Maliuta (n=scooby@kiev.lusan.id.au) |
| 06:03.46 | kb3ien | okay flowroute went from 6ms to 81ms! |
| 06:03.52 | kb3ien | not cool. |
| 06:04.01 | *** join/#asterisk verywiseman (n=verywise@unaffiliated/verywiseman) |
| 06:06.24 | kb3ien | that's good. incase i'm squatting on a phone without callerid, i still get spoken callerid. |
| 06:06.25 | *** join/#asterisk jme_009 (n=anus@bas2-ottawa23-1167852246.dsl.bell.ca) |
| 06:06.38 | *** join/#asterisk RMod (n=nicolasj@unaffiliated/rmod) |
| 06:06.46 | jql | hmm... what client was that? |
| 06:06.47 | *** join/#asterisk angler_ (n=angler@nat/digium/x-53e348208ec40328) |
| 06:06.48 | *** join/#asterisk fish-bulb (n=cstewart@nat/digium/x-24493b015cd1c40a) |
| 06:06.51 | *** join/#asterisk mnicholson (n=mnichols@nat/digium/x-aecfdb0168dab47b) |
| 06:07.06 | *** join/#asterisk jpeeler (n=jpeeler@asterisk/digium-software-dev/jpeeler) |
| 06:07.10 | *** join/#asterisk s0lid (n=s0lid@203.192.188.182) |
| 06:07.12 | *** join/#asterisk fordfrog (n=fordfrog@gentoo/developer/fordfrog) |
| 06:07.28 | *** join/#asterisk CunningPike (n=arodgers@S01060014bf81366b.vc.shawcable.net) |
| 06:07.51 | kb3ien | i'd like to figure out if a given polycom is sending direct to the sip-gateway on through asterisk, is there a litmus test for that? |
| 06:08.16 | *** part/#asterisk jme_009 (n=anus@bas2-ottawa23-1167852246.dsl.bell.ca) |
| 06:08.38 | jql | rtp debug if it's the only call in progress |
| 06:08.53 | jql | pretty damned easy to tell... the flood of packet debug and all that |
| 06:09.12 | [TK]D-Fender | checkout time. Later all |
| 06:11.10 | kb3ien | later! |
| 06:11.22 | kb3ien | good point. |
| 06:12.16 | Micc | g722 sounds awesome! |
| 06:12.42 | coppice | G.722.1 at 32k sounds much better :-) |
| 06:13.08 | jql | cheater |
| 06:13.19 | Micc | How can I see which sampling rate its using for g722? |
| 06:13.39 | coppice | there is only one sampling rate for G.722 - 16k |
| 06:14.27 | Micc | it should be using g722.1 |
| 06:14.32 | Micc | its hdvoice |
| 06:14.50 | jql | not unless you paid polycom more than $500 |
| 06:15.37 | Micc | jql, I paid for two hdvoice phones. |
| 06:15.39 | Qwell | coppice: god yes it does |
| 06:15.48 | jql | 722.1 isn't hdvoice, it's Siren |
| 06:15.52 | Qwell | it's pretty freaking amazing |
| 06:15.58 | jql | different brand name |
| 06:16.03 | coppice | and CELT sounds better than G.722.1 |
| 06:16.12 | Qwell | coppice: haven't heard CELT.. what's that? |
| 06:16.34 | coppice | Jean-Marc Valin's new super duper voice codec |
| 06:16.56 | Qwell | that's the speex dude? |
| 06:16.59 | Micc | does asterisk support g722.1? |
| 06:17.03 | coppice | yes |
| 06:17.07 | Qwell | why do I know that? |
| 06:17.26 | Qwell | I've heard the name once. ever. and it was just "Jean". and it was at lunch like...yesterday. |
| 06:17.43 | coppice | er, yes Jean-Marc Valin in the speex guy. * doesn't do G.722.1 |
| 06:17.48 | Qwell | coppice: actually... |
| 06:18.31 | Qwell | http://svn.digium.com/view/asterisk?view=revision&revision=175508 |
| 06:18.33 | Qwell | it does |
| 06:18.52 | Qwell | in pass-through, anyways |
| 06:19.20 | coppice | well, passthrough it pretty trivial to do. |
| 06:19.29 | kb3ien | okay bed time! |
| 06:19.49 | kb3ien | well one more thing.... |
| 06:19.51 | coppice | there's a G.722.1 codec available, when * gets around to using it :-) |
| 06:20.21 | kb3ien | is there any better FXO FXS analouge adapter than the cisco WICs? |
| 06:20.41 | kb3ien | or whatever they are in my 2600s |
| 06:21.01 | Micc | coppice, can I download and install it? |
| 06:21.08 | kb3ien | the mc3800s were horrible to me. |
| 06:21.46 | coppice | Micc: it won't do you much good without code to integrate it. freeswitch uses it right now |
| 06:22.23 | Micc | coppice, I'm not sure I would want to use it anyways. This sounds good enough I think for my customers. |
| 06:22.40 | Micc | coppice, I don't think I need to give them anything else that will take up more bandwidth. |
| 06:23.03 | coppice | G.722.1 works well for voice, and a lot of music. it really sucks with percussive stuff, though. CELT works well with them all |
| 06:36.36 | kb3ien | on second thoughts bed time... |
| 06:55.52 | *** join/#asterisk frk2 (n=frk2@zivios/member/fkhan) |
| 07:20.33 | *** join/#asterisk Sargun (n=Sargun@atarack/Staff/Sargun) |
| 07:25.37 | *** join/#asterisk pif (n=ldm@zenon.apartia.fr) |
| 07:30.00 | *** join/#asterisk Gopaul (n=chatzill@59.97.121.135) |
| 07:30.14 | Gopaul | how to handle mysql database connection in asterisk dialplan? |
| 07:34.16 | *** join/#asterisk _gm (n=gmustafa@115.186.106.37) |
| 07:53.06 | *** join/#asterisk jksM (i=jks@193.189.93.254) |
| 08:03.24 | *** join/#asterisk FabiOne (n=FabiOne@host86-154-static.59-88-b.business.telecomitalia.it) |
| 08:03.31 | FabiOne | hi all |
| 08:05.28 | FabiOne | there are some way to transfer an nanswered call to another context/extension digiding a code on the phone? i tryed with custom features but i got no success :-( |
| 08:11.28 | *** join/#asterisk ingenius (n=alektro@host144.200-117-157.telecom.net.ar) |
| 08:12.23 | *** join/#asterisk eric2 (n=nobody@69.60.247.142) |
| 08:12.46 | eric2 | zaptel dead but subsys locked any ideas? trying to get wanpipe going |
| 08:19.48 | *** join/#asterisk Greek-Boy (n=greek@41.222.89.77) |
| 08:23.23 | x86 | more details? |
| 08:37.28 | eric2 | I just removed everything.. .asterisk, wanpipe and zaptel |
| 08:37.30 | eric2 | going to reinstall |
| 08:37.35 | eric2 | x86 in what order? |
| 08:37.41 | eric2 | or does it matter? |
| 08:37.55 | eric2 | removed all and just came back from a reboot |
| 08:39.52 | x86 | i usually do wanpipe first (because it has to patch the zaptel source tree), then zaptel, then asterisk |
| 08:40.01 | eric2 | k |
| 08:42.56 | eric2 | where do I get the zaptel source? |
| 08:43.03 | eric2 | asterisk.org? |
| 08:44.53 | x86 | same place you get asterisk source |
| 08:59.07 | *** join/#asterisk erth64net (n=erth64ne@69-30-67-191.dq1sn.easystreet.com) |
| 09:00.26 | *** join/#asterisk af_ (n=getsmart@88-149-240-30.dynamic.ngi.it) |
| 09:00.31 | *** part/#asterisk lanning (n=lanning@173.8.187.197) |
| 09:01.34 | EmleyMoor | RFC5456 \o/ |
| 09:09.34 | tzafrir_laptop | eric2, http://downloads.digium.com/pub/zaptel/ |
| 09:09.34 | tzafrir_laptop | To browse it: http://svn.digium.com/svn/zaptel/branches/1.4 |
| 09:09.34 | tzafrir_laptop | or: |
| 09:09.44 | tzafrir_laptop | http://svn.digium.com/view/zaptel/branches/1.4 |
| 09:10.34 | eric2 | thanks :) |
| 09:13.32 | eric2 | tdm card is up, zaptel is fried: http://pastebin.ca/1343571 |
| 09:13.37 | eric2 | there's the output |
| 09:13.44 | eric2 | how do I fix this? |
| 09:14.36 | eric2 | zaptel gives me nothing but issues |
| 09:15.06 | eric2 | wanpipe is running |
| 09:15.10 | eric2 | asterisk is running |
| 09:15.10 | *** join/#asterisk ecret (n=ecret@CPE001e9002348e-CM001225d8ab30.cpe.net.cable.rogers.com) |
| 09:15.47 | scooby2 | anyone familiar with the perl AGI command set_variable? |
| 09:19.19 | tzafrir_laptop | eric2, I really don't know the output produced by Sangoma scripts |
| 09:20.02 | tzafrir_laptop | I guess that "dead but subsystem locked" is either an incorrect test by them or ztcfg failed |
| 09:20.26 | eric2 | ya, not sure, this is my first time having real issues like this.. :( |
| 09:39.10 | *** join/#asterisk theodred (n=nohost@205.207.102.195) |
| 09:39.16 | theodred | hello |
| 09:55.51 | *** join/#asterisk Mr_BOnD_007 (i=Mr_BOnD_@119.160.199.6) |
| 10:01.23 | *** join/#asterisk arpu (n=arpu@chello062178159144.10.14.univie.teleweb.at) |
| 10:02.32 | *** join/#asterisk s0lid (n=s0lid@203.177.91.163) |
| 10:13.10 | *** join/#asterisk drmessano^ (n=nonya@pdpc/supporter/active/drmessano) |
| 10:14.31 | *** join/#asterisk arejay (i=arejay@dawnshosting.com) |
| 10:26.03 | *** join/#asterisk jc6 (n=jc6@75.87.188.225) |
| 10:27.48 | jc6 | hi i am new to asterisk can any one help me in configuring gizmo for recieving calls |
| 10:29.41 | jc6 | file, please help me |
| 10:31.29 | jc6 | Qwell, please help me |
| 10:31.46 | drmessano^ | denon, please help me |
| 10:35.09 | tzafrir_laptop | jbot, tell jc6 about ask |
| 10:35.32 | *** join/#asterisk buzukelis (n=buzukeli@ip-195-14-171-9.bnk.lt) |
| 10:36.00 | drmessano^ | $nickname, please help me |
| 10:36.05 | buzukelis | hi guys, gow to install asterisk-addons to work with mysql-cdr |
| 10:36.06 | tzafrir_laptop | jc6, "gizmo" as in their SIP client? Or as in their service? |
| 10:36.52 | tzafrir_laptop | Their service is actually sipphone.com . search for: sipphone.com asterisk |
| 10:37.27 | tzafrir_laptop | buzukelis, apt-get install asterisk-mysql #? |
| 10:38.04 | tzafrir_laptop | If you install from source, use the standard procedure. What version of asterisk-addons? |
| 10:38.12 | tzafrir_laptop | What linux distribution do you use? |
| 10:39.42 | tzafrir_laptop | hmm... I see we'll have a KKK in some 8 monthes |
| 10:40.17 | tzafrir_laptop | (Kubuntu Karmic Koala) |
| 10:40.20 | buzukelis | i using centos 5.2 trying compile from source |
| 10:40.43 | tzafrir_laptop | And your problem is? |
| 10:41.14 | buzukelis | cdr's not apearing in mysql |
| 10:48.05 | *** join/#asterisk obnauticus (n=obnautic@about/windows/regular/obnauticus) |
| 10:55.31 | tzafrir_laptop | did cdr/cdr_mysql.so got built? installed? |
| 11:01.52 | *** join/#asterisk ITguru (n=ITGuru@5ac1064f.bb.sky.com) |
| 11:03.10 | *** join/#asterisk cheGGo (n=cheGGo2@dslb-088-069-014-129.pools.arcor-ip.net) |
| 11:12.41 | *** join/#asterisk Ast001 (n=uros@cable-89-216-154-211.dynamic.sbb.rs) |
| 11:13.19 | Ast001 | hello I can not see my x100p card on cat /proc/interrupts and I have error report on dmesg after loading wcfxo |
| 11:13.56 | Ast001 | NOTICE-wcfxo: WCFXO/0: Unknown DAA chip revision: REVB=0 |
| 11:14.05 | Ast001 | Failed to initailize DAA, giving up... |
| 11:14.15 | Ast001 | <PROTECTED> |
| 11:14.29 | Ast001 | it is not sharing interrupts with anything |
| 11:14.54 | Ast001 | on lspci -v i can see it has interrupt 20 but on cat /proc/interupts I can not see it |
| 11:15.45 | Ast001 | I tried to install asterisk on Ubuntu 8.04 server with zaptel 1-4-12 and zaptel 1-4-9 and asterisk 1-4-21.1 |
| 11:17.10 | Ast001 | is it broken card ? bad motherboard ? misconfiguration ? or to recent zaptel or kernel ? |
| 11:18.01 | Ast001 | or maybe digium messed up with zaptel to eliminate cheap competition ? |
| 11:18.26 | cjk | hi, i have 2 devices connected to my bri line, asterisk and another device. now for some MSN's I would like that asterisk just ignores the call. any idea on how to achieve this? |
| 11:20.08 | *** join/#asterisk stuffcorpse (n=rick@121.98.136.241) |
| 11:22.21 | Ast001 | I've read on internet myproblem is kernel problem someone changed kernel to sole YellowDog kernel and card started to function |
| 11:22.23 | cjk | forget my stupid question |
| 11:23.08 | Ast001 | ok see you later |
| 11:23.13 | *** part/#asterisk Ast001 (n=uros@cable-89-216-154-211.dynamic.sbb.rs) |
| 11:26.14 | cjk | <PROTECTED> |
| 11:27.05 | obnauticus | i can fix that problem |
| 11:27.09 | obnauticus | use email. |
| 11:27.15 | *** join/#asterisk mintos (n=mvaliyav@nat/redhat-in/x-3214e2d6f0054a62) |
| 11:45.20 | *** join/#asterisk mort_gib (n=mjensen@16.Red-83-36-63.staticIP.rima-tde.net) |
| 11:53.58 | *** join/#asterisk oej (n=olle@90-231-84-152-no112.business.telia.com) |
| 11:56.44 | *** join/#asterisk coppice (n=chatzill@126.168.17.210.dyn.pacific.net.hk) |
| 11:57.55 | *** join/#asterisk nighty^ (n=nighty@x122091.ppp.asahi-net.or.jp) |
| 12:00.36 | *** join/#asterisk shtoom (n=shtoom@121.246.167.147) |
| 12:02.12 | shtoom | Hi I've connected asterisk to syntel PBX for call recording purpose. every thing is going good except this occasional error on console chan_zap.c:8174 zt_pri_error: !! Unexpected Channel selection 3 |
| 12:02.24 | shtoom | what might be the issue ? |
| 12:02.58 | shtoom | I;ve seen similar posts on mailing lists but no one answered them |
| 12:14.49 | *** join/#asterisk russellb (n=russell@asterisk/digium-open-source-team-lead/russellb) |
| 12:14.49 | *** mode/#asterisk [+o russellb] by ChanServ |
| 12:20.11 | mort_gib | shtoom: Why are you doing that?? |
| 12:21.06 | *** join/#asterisk esaym (n=user@cpe-70-120-89-6.satx.res.rr.com) |
| 12:41.57 | *** join/#asterisk martyn-dev1 (i=be194458@gateway/web/ajax/mibbit.com/x-c2b4dbcf855f3c4b) |
| 12:42.02 | martyn-dev1 | hey! |
| 12:42.19 | martyn-dev1 | Do you know the linksys PAP reference with 1FXO and 1FXS |
| 12:42.20 | martyn-dev1 | ? |
| 13:20.25 | *** join/#asterisk grantm (n=grant@68.142.138.4) |
| 13:23.59 | *** join/#asterisk ajohnson (n=ajohnson@63.147.46.186) |
| 13:26.56 | *** join/#asterisk joat (n=joat@ip70-174-79-200.hr.hr.cox.net) |
| 13:28.38 | *** join/#asterisk stevetotaro (n=Steve@pool-72-72-143-197.hrbgpa.dsl-w.verizon.net) |
| 13:30.23 | jer | hrmm... can't seem to get my dialplan to respect the leading "+" in an incomming call (one of the phones insists upon putting a + infront of the country code; so when dialing 18005551212 for instance, it sends it to the * box as +18005551212) |
| 13:33.42 | jer | s/incoming/outgoing/ sorry |
| 13:37.53 | *** join/#asterisk shido6 (n=shido6@96-28-34-156.dhcp.insightbb.com) |
| 13:39.09 | *** join/#asterisk Bonix (n=Bonix@200-195-41-212.isimples.com.br) |
| 13:40.51 | *** join/#asterisk jmacz (n=jmacz@190.25.35.100) |
| 13:44.16 | *** join/#asterisk riddlebox (n=james@75-132-225-75.dhcp.stls.mo.charter.com) |
| 13:54.49 | *** join/#asterisk andresmujica1 (n=andresmu@ubuntu/member/andresmujica) |
| 13:56.18 | *** join/#asterisk stuffcorpse (n=rick@121.98.136.241) |
| 14:06.33 | *** join/#asterisk stuffcorpse (n=rick@121.98.136.241) |
| 14:12.06 | *** join/#asterisk megacrypto_ (n=mega@41.232.107.72) |
| 14:14.06 | megacrypto_ | hi all .. im trying to get my first asterisk server running and was looking for some help |
| 14:19.17 | megacrypto_ | well. i'll just say what i need.. basically is to setup sip for my home .. no outside calling or receiving, just an internal network |
| 14:19.38 | megacrypto_ | im trying to do this to learn asterisk and take it a step at a time |
| 14:20.44 | megacrypto_ | i posted a thread yesterday regarding my question http://forums.digium.com/viewtopic.php?t=67318 |
| 14:24.08 | *** join/#asterisk manxpower (n=manxpowe@42.sub-75-202-38.myvzw.com) |
| 14:28.56 | *** join/#asterisk _ShrikE (n=_ShrikE@adsl-074-185-215-060.sip.msy.bellsouth.net) |
| 14:28.57 | *** join/#asterisk joat (n=joat@ip70-174-79-200.hr.hr.cox.net) |
| 14:29.56 | megacrypto_ | is anyone around? |
| 14:30.54 | *** join/#asterisk Subdolus (n=subby@subby.afraid.org) |
| 14:31.24 | *** join/#asterisk MmixX (n=mix@61.14.191.142) |
| 14:34.09 | *** join/#asterisk minotaur01 (n=test@mail.upperjamestoyota.ca) |
| 14:34.37 | *** join/#asterisk ingenius (n=alektro@host16.190-136-29.telecom.net.ar) |
| 14:37.02 | *** join/#asterisk MaliutaLap (n=biteme@203.171.192.27) |
| 14:37.42 | *** join/#asterisk rpm (n=rpm@S010600055d2cf2e2.cg.shawcable.net) |
| 14:37.48 | Pan3D | morning * people |
| 14:38.06 | Talkradio | morning |
| 14:39.02 | minotaur01 | morning |
| 14:39.09 | *** join/#asterisk path_ (n=path@pc-15-190-86-200.cm.vtr.net) |
| 14:43.42 | jer | hrmm... can't seem to get my dialplan to respect the leading "+" in an outgoing call (one of the phones insists upon putting a + infront of the country code; so when dialing 18005551212 for instance, it sends it to the * box as +18005551212) |
| 14:44.11 | *** join/#asterisk stuffcorpse (n=rick@121.98.136.241) |
| 14:45.22 | *** join/#asterisk qdk (n=qdk@0x55815908.terminal.tdcmobil.dk) |
| 14:50.20 | _ShrikE | jer: pb your dialplan |
| 14:51.19 | Talkradio | maybe the dial plan inside the phone, i'd compare it to another phone if you can |
| 14:52.43 | jer | _ShrikE, the dialplan is 357 lines long, you want it all or just the relevant portion? |
| 14:52.53 | *** part/#asterisk andresmujica1 (n=andresmu@ubuntu/member/andresmujica) |
| 14:52.55 | _ShrikE | Jet the relevant part |
| 14:52.58 | jer | ok |
| 14:52.59 | jer | one second |
| 14:53.00 | _ShrikE | err just |
| 14:53.21 | *** join/#asterisk empiric (n=empiric@116.71.52.222) |
| 14:53.23 | manxpower | exten => _+.,1,Goto(${EXTEN:1),1) |
| 14:53.35 | manxpower | well with the correct closing brace, of course. |
| 14:54.06 | manxpower | and if your dialplan is 357 lines long you should have been able to figure that out for yourself. 8-| |
| 14:54.07 | Magicblaze007 | how can grandcentral give free calling whereas voicepulse charges for each call? |
| 14:54.11 | *** join/#asterisk BBHoss (n=bbhoss@68.159.148.173) |
| 14:54.25 | empiric | hi all i am using IP phone Dlink DPH-80 it gets regiesteerd when i try t call from IP phone it says using SIP RTP Cos Mark 5 |
| 14:54.25 | manxpower | Magicblaze007: Ask them. We don't know their business plan. |
| 14:54.30 | empiric | what this mean |
| 14:54.42 | jer | shido6, http://pastebin.ca/1343703 |
| 14:54.54 | manxpower | empiric: means the RTP audio has a class of service of 5, (the default, I think) |
| 14:55.01 | jer | manxpower, shit i forgot the leading _ =[ |
| 14:55.04 | jer | and you're right i should have |
| 14:55.22 | Magicblaze007 | Thanks manxpower. Also, is there a place where voip providers call quality/reliablity has been compared by an independent source? |
| 14:55.30 | jer | the dialplan is actually long overdue for an optimization |
| 14:55.32 | manxpower | Magicblaze007: no. |
| 14:55.41 | shido6 | erf? |
| 14:55.47 | manxpower | jer: We all have our bad days, |
| 14:56.37 | jer | manxpower, that fixed it up, thanks for the kick in the head |
| 14:57.15 | riddlebox | jer, just be glad [TK-fender] isnt around :) |
| 14:57.41 | empiric | but i cannot call on any local extension why |
| 14:57.41 | empiric | but others can call me |
| 14:58.51 | manxpower | empiric: your problem is not caused by that message |
| 14:59.56 | jer | riddlebox, it's not like i asked "having a hard time dialing e.164 numbers out of my sip trunk" =p |
| 15:00.25 | Magicblaze007 | is it easy to setup asterisk so that it talks to two different voip providers? (Selects the voip provider which is giving better voice quality that day) + That will also give redundancy I guess? |
| 15:00.57 | riddlebox | jer, :) |
| 15:02.33 | *** join/#asterisk gr0mit (n=tim@extrt.txrx.org.uk) |
| 15:02.38 | *** join/#asterisk MaliutaLap (n=biteme@203.171.192.217) |
| 15:02.44 | jer | Magicblaze007, you could probably write an agi which performs some testing and calculating some hueristics on what you define as "better voice quality", and dials out that provider. the exact specifications of such a system, are beyond the scope of this answer =] |
| 15:02.59 | jer | s/calculating/applying/ |
| 15:03.11 | jer | oh, slick |
| 15:03.16 | *** join/#asterisk empiric (n=empiric@116.71.52.222) |
| 15:03.22 | empiric | manxpower |
| 15:03.26 | empiric | whats the cure |
| 15:03.46 | empiric | from xlite i can call on dlink from link i can not |
| 15:04.13 | empiric | that above RTP error comes more faster as soon as i call |
| 15:04.21 | empiric | any idea wht to do |
| 15:05.28 | *** join/#asterisk nighty^ (n=nighty@x122091.ppp.asahi-net.or.jp) |
| 15:06.16 | manxpower | empiric: Dude, that is NOT AN ERROR MESSAGE |
| 15:06.16 | manxpower | You have some OTHER issue that you have NOT DISCOVERED YET |
| 15:06.36 | empiric | ok |
| 15:07.01 | manxpower | jer: In the VoIP world it |
| 15:07.07 | empiric | but the phone is regieterd n am etting calls means its conected |
| 15:07.17 | empiric | ok wait me coming |
| 15:07.20 | manxpower | s usually easier to let the device do what it wants to do and fix it in the dialplan |
| 15:07.22 | jer | manxpower, in the voip world it is what? |
| 15:07.32 | manxpower | jer: In this case, phones. |
| 15:07.41 | jer | ah, yeah that's what i was hoping to do =] |
| 15:07.43 | manxpower | But it can apply to carriers or other switches or proxies or whatever |
| 15:08.13 | jer | just the pbx for my home, so i do all the cleanup before i send it out (if it gets sent out) |
| 15:08.16 | scooby2 | anyone familiar with the perl AGI command set_variable? my perl script is doing: $AGI->set_variable('FOREIGN','TRUE'); but NoOp(${FOREIGN}) returns literal $FOREIGN and not a value |
| 15:09.06 | manxpower | scooby2: that would indicate some form of syntax error. When you do something like a NOOP you should never get the literal back. |
| 15:09.46 | scooby2 | thats what I was thinking. its like FOREIGN is not set |
| 15:10.01 | manxpower | scooby2: if that was the case you would get a blank back |
| 15:10.08 | scooby2 | ahh |
| 15:10.43 | manxpower | On the console if you see the math, expression, or variable name then almost always you have a syntax error. |
| 15:11.10 | scooby2 | thank you |
| 15:11.37 | manxpower | scooby2: I understand it's not very intuitive |
| 15:12.35 | *** join/#asterisk russellb (n=russell@asterisk/digium-open-source-team-lead/russellb) |
| 15:12.35 | *** mode/#asterisk [+o russellb] by ChanServ |
| 15:20.18 | *** join/#asterisk MmixX (n=mix@61.14.191.142) |
| 15:28.06 | *** join/#asterisk gr0mit (n=tim@extrt.txrx.org.uk) |
| 15:35.53 | *** join/#asterisk gr0mit (n=tim@extrt.txrx.org.uk) |
| 15:38.17 | manxpower | 560244 |
| 15:42.13 | Magicblaze007 | is gizmo4 a voip service provider as well? |
| 15:43.42 | *** join/#asterisk Ast001 (n=uros@cable-89-216-154-211.dynamic.sbb.rs) |
| 15:44.00 | *** join/#asterisk verywiseman (n=verywise@unaffiliated/verywiseman) |
| 15:44.04 | Ast001 | hi my x100p card can not be initialized and I can see error in dmesg |
| 15:44.52 | Ast001 | <PROTECTED> |
| 15:45.03 | Ast001 | Failed to initailize DAA, giving up... |
| 15:45.20 | Ast001 | wcfxo: probe of 0000:00:08.0 failed with error -5 |
| 15:45.42 | Ast001 | I also can not see interrupt in /proc/interrupts for wcfxo |
| 15:45.54 | Ast001 | but I can see x100p on lspci |
| 15:46.21 | tzafrir_laptop | yes. The error is that the driver fails to talk properly with the card |
| 15:46.52 | Ast001 | lspci -v indicates that x100p has interrupt 20, but on cat /proc/interrupts I can not see wcfxo |
| 15:47.10 | Ast001 | why is that tzafrir ? |
| 15:47.26 | Ast001 | I use zaptel 1.4.12 I tried 1.4.9 too but has the same result |
| 15:49.38 | Ast001 | Should I revert to some ancient version like 1.2.16 and fedora 6 ? |
| 15:50.08 | Ast001 | I tried to install asterisk on Ubuntu 8.04 server |
| 15:56.49 | eric2 | I just had issues with zaptel, turns out to be inconsistencies with some of my rpm's... my fault |
| 15:59.05 | manxpower | now you understand WHY most of us recommend compiling from source. |
| 15:59.28 | manxpower | Ast001: wcfxo is not loaded |
| 16:00.11 | *** join/#asterisk erth64net (n=erth64ne@69-30-67-191.dq1sn.easystreet.com) |
| 16:00.47 | *** join/#asterisk joat (n=joat@ip70-174-79-200.hr.hr.cox.net) |
| 16:01.26 | tzafrir_laptop | manxpower, that is irrelevant. |
| 16:02.00 | Ast001 | tzafrir if you want i can give you ssh access to see what is happening |
| 16:02.13 | tzafrir_laptop | Ast001, no real need |
| 16:02.52 | Ast001 | I have feeling it would work good on some older kernel |
| 16:02.58 | tzafrir_laptop | You can download latest zaptel or dahdi-linux , build it (without installing) and insmod zaptel.ko / dahdi.ko and wcfxo.ko from there |
| 16:03.18 | *** join/#asterisk chendy (n=chatzill@58.61.196.225) |
| 16:03.21 | tzafrir_laptop | This should test if the problem is reproduced |
| 16:03.41 | Ast001 | just to do make not make install ? |
| 16:03.49 | tzafrir_laptop | just 'make' |
| 16:04.07 | tzafrir_laptop | (in zaptel: ./configure #first) |
| 16:04.22 | Ast001 | just doing that |
| 16:06.53 | eric2 | I think source is best, but rpm's for my distro was the quick and dirty shortcut |
| 16:07.35 | *** join/#asterisk [TK]D-Fender (n=joe@64.235.218.194) |
| 16:09.51 | Ast001 | insmod zaptel.ko no such file or directory |
| 16:09.53 | *** join/#asterisk dgoner (n=david@mx1.repairpc.net) |
| 16:10.13 | Ast001 | I did ./configure and make and I can no insmod from there |
| 16:10.26 | Ast001 | I can't insmod zaptel.ko |
| 16:15.18 | chendy | try modprobe -v zaptel after make install |
| 16:15.41 | Ast001 | he said to do just make and then to try to insmode |
| 16:16.35 | chendy | the kernel modules were placed unde kernel/ directory |
| 16:16.53 | Ast001 | I see |
| 16:16.55 | chendy | so, try insmod kernel/zaptel.ko |
| 16:17.30 | Ast001 | insmod: error inserting 'kernel/zaptel.ko': -1 File exists |
| 16:17.41 | k-man | i'm trying to get inbound calls working - i have set up the port forwards, but it still does not work - how can i monitor the port to see if anything comes in on it when i get an inbound call? |
| 16:18.04 | [TK]D-Fender | k-man: "sip set debug on" |
| 16:19.24 | k-man | [TK]D-Fender: yes - did that and nothing - i suspect my portforwards are not working |
| 16:19.35 | k-man | but i dunno |
| 16:20.11 | [TK]D-Fender | k-man: Do you see the local traffic when you did it? |
| 16:22.25 | k-man | [TK]D-Fender: it receives something from the vsp |
| 16:22.28 | k-man | ill paste it |
| 16:23.34 | k-man | http://pastebin.ca/1343742 |
| 16:24.08 | *** join/#asterisk jaytee (n=jforde@unaffiliated/jaytee) |
| 16:25.36 | k-man | theres an error: SIP/2.0 400 Bad Request |
| 16:25.58 | Ast001 | I dont know I guess I will try to use older zaptel drivers with some other distro |
| 16:26.05 | *** join/#asterisk coppice (n=chatzill@126.168.17.210.dyn.pacific.net.hk) |
| 16:26.09 | Ast001 | see you |
| 16:26.18 | *** part/#asterisk Ast001 (n=uros@cable-89-216-154-211.dynamic.sbb.rs) |
| 16:26.19 | [TK]D-Fender | k-man: that is not an INVITE, that is a QUALIFY packets |
| 16:26.40 | k-man | oh |
| 16:27.23 | k-man | is there any way to get the messages logged to a file? |
| 16:27.59 | k-man | [TK]D-Fender: but can i at least say that the port forwarding on port 5060 is working from that message? |
| 16:29.48 | [TK]D-Fender | k-man: Should be. reload SIP and try to get * to register |
| 16:33.07 | k-man | i can see outbound registering |
| 16:33.11 | *** join/#asterisk silversens (n=syl@LAubervilliers-153-53-5-141.w217-128.abo.wanadoo.fr) |
| 16:33.13 | k-man | but nothing about inbound |
| 16:34.11 | k-man | http://pastebin.ca/1343747 |
| 16:35.00 | silversens | Hi, I really need help here I got troubles with dahdi : I did install it correctly and auto generate config files, they contain the good informations about my cards |
| 16:35.20 | silversens | my chan_dahdi.conf is also correct |
| 16:35.41 | silversens | but when I module load chan_dahdi.so |
| 16:35.46 | silversens | [Feb 21 17:36:35] WARNING[3550]: chan_dahdi.c:930 dahdi_open: Unable to specify channel 6: No such device or address |
| 16:35.46 | silversens | [Feb 21 17:36:35] ERROR[3550]: chan_dahdi.c:7357 mkintf: Unable to open channel 6: No such device or address |
| 16:35.46 | silversens | here = 0, tmp->channel = 6, channel = 6 |
| 16:35.46 | silversens | [Feb 21 17:36:35] ERROR[3550]: chan_dahdi.c:10946 build_channels: Unable to register channel '6' |
| 16:36.16 | silversens | and it says the same thiing for all my channels |
| 16:38.36 | silversens | http://pastebin.com/m19fd8e69 |
| 16:39.14 | silversens | here are my /etc/dahdi/system.conf and /etc/asterisk/chan_dahdi.conf |
| 16:39.18 | silversens | please help... |
| 16:39.23 | silversens | I really don't get it |
| 16:39.28 | *** join/#asterisk lbt (n=david@78.32.229.233) |
| 16:41.07 | k-man | [TK]D-Fender: bed time - ill be back later to pester you about it ;) |
| 16:41.11 | k-man | thanks for your help |
| 16:41.13 | k-man | night all |
| 16:43.47 | [TK]D-Fender | silversens: stop *. do "dahdi_cfg -vvvv", then try to restart * manually. PB everything |
| 16:43.53 | [TK]D-Fender | k-man: nite |
| 16:45.10 | *** join/#asterisk ingenius (n=alektro@host16.190-136-29.telecom.net.ar) |
| 16:46.28 | silversens | [TK]D-Fender : Thanks for answering, here's what dahdi_cfg gives : http://pastebin.com/m3deb3e25 |
| 16:46.43 | silversens | I don't think I need to go further since I get : DAHDI_CHANCONFIG failed on channel 1: No such device or address (6) |
| 16:47.07 | [TK]D-Fender | silversens: pastebin dmesg |
| 16:48.35 | silversens | [TK]D-Fender: http://pastebin.com/m53ee8092 |
| 16:52.29 | [TK]D-Fender | silversens: "cat /proc/interrupts" |
| 16:52.42 | [TK]D-Fender | silversens: Last thing in dmesg looks like to unconfigured them |
| 16:53.48 | silversens | [TK]D-Fender: http://pastebin.com/m588a9751 |
| 16:54.15 | [TK]D-Fender | silversens: indeed the card is gone |
| 16:54.19 | silversens | [intra]lanman : what do u mean by "unconfigured them " ? |
| 16:54.25 | [TK]D-Fender | silversens: do "modprobe wctdm" twice |
| 16:54.34 | [TK]D-Fender | silversens: then redo the last 2-3 things |
| 16:54.49 | tzafrir_laptop | modprobe twice? why? |
| 16:55.15 | tzafrir_laptop | dahdi_hardware should generally also tell you if the driver for your card is loaded |
| 16:55.35 | tzafrir_laptop | If it is loaded, you should see its channels in lsdahdi |
| 16:55.58 | *** join/#asterisk Neo2102 (n=Jarrings@220.235-247-81.adsl-dyn.isp.belgacom.be) |
| 16:56.04 | Neo2102 | Yup |
| 16:56.23 | tzafrir_laptop | if it is not loaded ('-wctdm') - is the module wctdm loaded? |
| 16:56.25 | Neo2102 | ANyone know if they are problem with vmware ? |
| 16:56.32 | tzafrir_laptop | lsmod | grep ^wctdm |
| 16:56.36 | [TK]D-Fender | Neo2102: Try asing in #vmware |
| 16:56.42 | Neo2102 | Playback Sound is too slowly |
| 16:57.12 | Neo2102 | I don't know but all playback sound is slow |
| 16:59.12 | silversens | [TK]D-Fender : I got it, thanks : I was loading dahdi-transcode instead of dahdi_transcode |
| 16:59.15 | silversens | so stupid |
| 17:01.36 | *** join/#asterisk freakazoid0223 (n=matt@pool-71-246-17-74.phlapa.fios.verizon.net) |
| 17:02.51 | tzafrir_laptop | silversens, it's the same . insmod translates '-' to '_' |
| 17:03.00 | silversens | tzafrir_laptop |
| 17:03.04 | silversens | yep that's not it |
| 17:03.13 | silversens | for one second the module was loading |
| 17:03.18 | Neo2102 | Who has already installed * on, vmware ? |
| 17:03.18 | silversens | I try to understand why |
| 17:03.32 | tzafrir_laptop | I asked you some very specific questions above |
| 17:05.11 | silversens | tzafrir_laptop: lsdahdi = http://pastebin.com/m527f9a00 |
| 17:06.04 | silversens | tzafrir_laptop : lsmod | grep ^wctdm = nothing |
| 17:06.54 | tzafrir_laptop | What version of dahdi-tools do you use? |
| 17:07.10 | silversens | 2.1.0.2 |
| 17:08.23 | tzafrir_laptop | ok. that's a bit odd. But anyway, you do have two existing spans for two cards |
| 17:08.27 | Neo2102 | I've some problem all playback sound are very slow |
| 17:08.40 | Neo2102 | it's too difficult to hear because it's too slow |
| 17:08.47 | Neo2102 | I don't have any hardware card |
| 17:14.00 | silversens | ok I get ity |
| 17:14.34 | silversens | I just needed to run dahdi_cfg after loading modules and before running asterisk |
| 17:14.36 | silversens | sorry.... |
| 17:15.33 | silversens | one question though : before, to access those channels we were using Zap/X in exensions.conf |
| 17:15.59 | silversens | what do we need to use now ? Not the same thing cause I get : ast_request: No channel type registered for 'Zap' |
| 17:18.21 | *** join/#asterisk empiric (n=empiric@116.71.58.44) |
| 17:18.52 | silversens | Ok I got my answer : DAHDI/X |
| 17:19.01 | silversens | thanks for your help all ! |
| 17:19.09 | *** part/#asterisk silversens (n=syl@LAubervilliers-153-53-5-141.w217-128.abo.wanadoo.fr) |
| 17:19.43 | empiric | guys i have dlink DVG-14025 voip router any one use that with astersk for outbound calls |
| 17:19.43 | empiric | ? |
| 17:24.54 | [TK]D-Fender | empiric: can you get into the amin page to configure it? |
| 17:24.59 | [TK]D-Fender | admin* |
| 17:25.09 | empiric | yes |
| 17:25.38 | empiric | but it has 4 RJ45 and 2 RJ11 ports |
| 17:25.54 | empiric | and WAN port how i make calls outbound? |
| 17:26.39 | [TK]D-Fender | empiric: Set it up like you would any other ATA with * |
| 17:26.41 | empiric | its bit strange i configure one of my IP phone and its regestered with asterisk i can recieve incoming cals on that no outgoing calls on locl ext |
| 17:28.01 | *** join/#asterisk Tales (n=hayley@c-69-244-185-132.hsd1.mi.comcast.net) |
| 17:42.25 | *** join/#asterisk bmoraca (n=chatzill@adsl-99-137-86-249.dsl.skt2ca.sbcglobal.net) |
| 17:42.49 | *** join/#asterisk Dovid (n=annon@tony09-121-90.inter.net.il) |
| 17:49.37 | *** join/#asterisk thansen (n=thansen@c-76-27-110-194.hsd1.ut.comcast.net) |
| 17:55.55 | *** join/#asterisk UQlev (n=kvirc@91.184.221.31) |
| 17:56.16 | *** join/#asterisk fakhir (n=fakhir@unaffiliated/fakhir) |
| 18:15.00 | *** join/#asterisk empiric (n=empiric@116.71.58.44) |
| 18:15.03 | *** join/#asterisk nix8n82 (n=nate@mo-65-41-196-62.sta.embarqhsd.net) |
| 18:19.19 | *** join/#asterisk ingenius (n=alektro@host16.190-136-29.telecom.net.ar) |
| 18:21.04 | *** join/#asterisk Tommy3 (n=tom@c-76-29-235-137.hsd1.al.comcast.net) |
| 18:22.51 | Tommy3 | I need to get asterisk loaded on wrt54gl. Anyone got some experience to share? |
| 18:23.30 | *** join/#asterisk mazpe (n=mazpe@c-76-109-233-122.hsd1.fl.comcast.net) |
| 18:24.24 | UQlev | Tommy3: I guess wrt's CPU will not support asterisk |
| 18:24.30 | UQlev | and codecs |
| 18:25.14 | *** join/#asterisk shazaum (n=shazaum@unaffiliated/shazaum) |
| 18:25.23 | shazaum | hi dude's |
| 18:25.42 | shazaum | with use rawman ? |
| 18:25.45 | Tommy3 | There's a version for OpenWRT, but I cant find anyone to give me advise. |
| 18:26.41 | Tommy3 | I have asterisk running on an old server. costs too much to run considering cost to run the wrt54gl router instead. |
| 18:27.16 | Tommy3 | got my family hooked on asterisk, now im trying to cut costs. |
| 18:27.51 | beek | Tommy3: I have mine running on an Asus GL-500P. That's OpenWRT. |
| 18:28.13 | shazaum | I do me if the http server returns "404" at destination "rawman" ? |
| 18:28.14 | mvanbaak | I have mine running on a Soekris 4801. Full linux |
| 18:28.44 | *** join/#asterisk RobertLaptop (n=rmiddle@96.244.48.200) |
| 18:29.19 | Tommy3 | beek: maybe with a little note comparing you could help me. I can see one of the downloads in my openwrt webpage is asterisk. Im at that point. |
| 18:30.10 | Tommy3 | beek: I also have a memory card with socket that I have not installed yet. not sure if I need it for asterisk. |
| 18:30.35 | beek | I mounted a USB stick and have my Asterisk installation loaded there. |
| 18:30.45 | mazpe | how do i change the caller id based on the extension that is calling? |
| 18:30.54 | beek | It's been a while since I've done this, and I'm rusty. I'm looking at the configs now. |
| 18:31.41 | beek | Ahh... I see what I did now. I added to ipkg.conf: src asterisk14 http://members.home.nl/hans.zandbelt/openwrt/kamikaze/7.09 and then used ipkg to install Asterisk. |
| 18:31.53 | beek | The instructions for that were on his site, IIRC. |
| 18:32.07 | Tommy3 | beek: I'll be here for a while. I made this my mission for the day. |
| 18:32.40 | beek | Tommy3: Good luck. |
| 18:32.41 | Tommy3 | beek: loading up the webpage now.... |
| 18:33.28 | *** join/#asterisk BadHAL (n=nn@cpe-72-179-194-139.stx.res.rr.com) |
| 18:33.28 | Tommy3 | beek: thanks. are you around here a lot. I may end up with config issues that are asterisk specific. |
| 18:34.52 | beek | Off and on. |
| 18:35.02 | *** join/#asterisk joat (n=joat@ip70-174-79-200.hr.hr.cox.net) |
| 18:35.25 | Tommy3 | beek: No luck with that website. I speak english and latin, but no german. Thanks anyway. appreciate your interest. |
| 18:36.36 | beek | Tommy3: There are some instructions written in english somewhere that reference that site. That's what I used. See if google can help locate them. |
| 18:37.10 | beek | IIRC, I googled OpenWRT and Asterisk and found the site. Perhaps add some of that configuration line will help speed the process. |
| 18:38.04 | *** join/#asterisk BuSyAnToS (n=31749@81-208-83-253.fastres.net) |
| 18:38.16 | mazpe | hmm.. |
| 18:39.31 | Tommy3 | beek: Ok, thanks. |
| 18:39.49 | eppigy | hello |
| 18:39.52 | eppigy | i am dave |
| 18:40.08 | *** join/#asterisk moy (n=moy@CPE001cdfec4cee-CM00080dab8485.cpe.net.cable.rogers.com) |
| 18:41.15 | mvanbaak | hey dave |
| 18:41.20 | eppigy | hi |
| 18:41.53 | *** join/#asterisk qdk (n=qdk@0x558140c7.terminal.tdcmobil.dk) |
| 18:42.06 | *** join/#asterisk brad_mssw (n=brad@shop.monetra.com) |
| 18:43.02 | Tommy3 | mvanbaak: didnt mean to ignore you. was focused on traffic from beek. didnt see yours til now. |
| 18:43.19 | mvanbaak | no problem Tommy3 |
| 18:43.43 | mvanbaak | Tommy3: I prefer to run asterisk on something a bit better then openwrt |
| 18:43.52 | Tommy3 | mvanbaak: dont know what that device is, but am interested in any advise. |
| 18:43.55 | mvanbaak | so I got a soekris 4801 with a 1GB flash card |
| 18:44.24 | drmessano^ | or you can run it on a computer |
| 18:44.27 | mvanbaak | a soekris is a small board with CPU and memory soldered on it, and it has 3 network interfaces and a CF slot where you can put your CF card |
| 18:44.34 | Tommy3 | mvanbaak: I have 1gb flash but not wired in yet. will it be required do you think? |
| 18:44.42 | mvanbaak | drmessano^: the whole idea here is to run a no-noise, low power device |
| 18:45.34 | mvanbaak | Tommy3: http://soekris.com/pictures/net4801/net4801_BC_back_big.jpg |
| 18:45.39 | drmessano^ | Yeah, because, I didn't know that |
| 18:45.52 | mvanbaak | http://soekris.com/pictures/net4801/net4801_BC_interior_big.jpg |
| 18:46.06 | *** join/#asterisk mog (n=mog@c-68-62-170-242.hsd1.al.comcast.net) |
| 18:46.06 | *** mode/#asterisk [+o mog] by ChanServ |
| 18:46.25 | mvanbaak | I use the 5501 as redundant firewalls |
| 18:46.33 | eppigy | look at you |
| 18:46.47 | mvanbaak | http://soekris.kd85.com/images/tn/dsc07080.med.jpg |
| 18:46.48 | mvanbaak | that one |
| 18:47.22 | beek | mvanbaak: What distro do you run on that thing? |
| 18:47.37 | mvanbaak | beek: OpenBSD |
| 18:47.50 | beek | mvanbaak: You compile * from source then? |
| 18:48.07 | drmessano^ | Nah, he uses RPMs |
| 18:48.14 | mvanbaak | beek: yes |
| 18:48.15 | ricko73 | mvanbaak: Astlinux ftw |
| 18:48.17 | drmessano^ | PLEASE SOME LAUGH AND NOT CORRECT ME |
| 18:48.22 | drmessano^ | SOMEONE* |
| 18:48.23 | mvanbaak | lol drmessano^ |
| 18:48.23 | drmessano^ | Anyway |
| 18:48.59 | beek | ricko73: You use Astlinux on one of these? |
| 18:49.00 | *** join/#asterisk eric256 (n=eric256@c-75-71-188-88.hsd1.co.comcast.net) |
| 18:49.17 | ricko73 | yes, I'm one of the project devs |
| 18:49.29 | Neo2102 | Hey who has already installed Elastix on Vmware Server ? |
| 18:49.36 | beek | heads over to the astlinux website... |
| 18:49.36 | mvanbaak | ricko73: tho problem is, astlinux == linux |
| 18:49.37 | ricko73 | I mostly use net5501's now, but it will still work on a net4801 |
| 18:49.48 | drmessano^ | This channel needs more humor |
| 18:49.51 | drmessano^ | s/humor/people telling me an Centos 5.2 and RPMS on a 128MB CF is a bad idea/ |
| 18:50.05 | drmessano^ | Close enough |
| 18:50.29 | ricko73 | mvanbaak: Askozia was *BSD, but they are supposedly moving to Linux too |
| 18:50.36 | drmessano^ | Anyway.. Back to installing Qwell's latest wet dream in Virtual Box |
| 18:50.39 | Neo2102 | Asterisk on vmware does'nt work ? |
| 18:50.42 | *** join/#asterisk RypPn (i=TuMbL@rosscom.demon.co.uk) |
| 18:51.03 | mvanbaak | Neo2102: it works fine on vmware. but you were asking for elastix on vmware server |
| 18:51.18 | mvanbaak | Neo2102: that's a pretty specific setup |
| 18:51.28 | mvanbaak | Neo2102: most people use plain asterisk |
| 18:51.32 | drmessano^ | Elastix is a friggin beast |
| 18:51.35 | *** join/#asterisk Khratos (n=Khratos@190.166.158.179) |
| 18:51.40 | drmessano^ | With precompiled binaries |
| 18:51.47 | eppigy | D: |
| 18:51.48 | Qwell | beast? |
| 18:52.05 | drmessano^ | Bloat |
| 18:52.15 | eppigy | bloast |
| 18:52.16 | Qwell | oh |
| 18:52.39 | drmessano^ | I feel like I ate 3 lbs of indian food after installing it, which I have done, all of ONCE |
| 18:52.48 | *** join/#asterisk lanning (n=lanning@173.8.187.197) |
| 18:52.48 | *** join/#asterisk _pepo_ (n=_pepo_@190.12.5.106) |
| 18:52.50 | Neo2102 | mvanbaak playback sound played very SLOWNLY |
| 18:52.51 | _pepo_ | hi friends |
| 18:53.00 | drmessano^ | Elastix seemed shitty to me, so I moved on |
| 18:53.08 | _pepo_ | please, how do I exit from CLI console in asterisk? |
| 18:53.15 | drmessano^ | exit |
| 18:53.23 | Khratos | _pepo_, quit |
| 18:53.25 | _pepo_ | it does not work |
| 18:53.36 | Khratos | of course, not when you start it as 'asterisk -gvvvvvvvvvvvc' |
| 18:53.42 | mvanbaak | _pepo_: CTRL+c |
| 18:54.00 | _pepo_ | CTRL+c ---> shutdown my asterisk |
| 18:54.06 | drmessano^ | Khratos: You left out 3 v's, an e, and two Z's.. You have 30 seconds to guess the puzzle |
| 18:54.25 | drmessano^ | ZOMG I WONT WHEEL OF FORTUNE |
| 18:54.29 | drmessano^ | Damnit man |
| 18:54.31 | drmessano^ | WON* |
| 18:54.55 | mvanbaak | I tried elastix and found out it's like all the other GUI's: bloatware |
| 18:55.24 | drmessano^ | Ehhh.. thats not accurate and overgeneralizing |
| 18:55.35 | mvanbaak | maybe |
| 18:55.36 | drmessano^ | Elastix includes a LOT of CRAPware |
| 18:55.51 | drmessano^ | It tries to do too much, like CRM, Email server, IM server etc |
| 18:55.55 | drmessano^ | Its not a PBX, its a toy |
| 18:55.58 | eppigy | wut r elastix |
| 18:56.17 | drmessano^ | It like Asterisk Small Business Server 2009 ZOMG Edition |
| 18:56.21 | eric256 | is there a condition to tell if all of a ques members are busy? i need to send a call to a que, but play a message first only if the que is full |
| 18:56.31 | eppigy | OMGWTFBBQ rc1 |
| 18:56.39 | mvanbaak | eppigy: indeed |
| 18:56.42 | drmessano^ | eppigy: rc2 is out, please upgrade |
| 18:56.43 | *** join/#asterisk BadHAL (n=nn@cpe-72-179-194-139.stx.res.rr.com) |
| 18:56.46 | eppigy | true |
| 18:56.51 | eppigy | looks for the torrent |
| 18:57.08 | eric256 | ~book |
| 18:57.08 | jbot | book is probably probably Asterisk: The Future of Telephony 2nd Edition (ISBN 0-596-51048-9) --- Order yours at http://www.oreilly.com/catalog/9780596510480/ --- Free downloadable PDF at http://www.asteriskdocs.org --- HTML at http://tfot.leifmadsen.com or see ~buybook |
| 18:57.20 | mvanbaak | eric256: just issue the queuecommand. configure the queue to not take any members when the queue is full and play the message in the next priority |
| 18:57.49 | eric256 | mvanbaak: but i want them to goto the same que, just after the message |
| 18:58.27 | eric256 | or an easy way to configure people to login to multiple queues i guess, then i could bounce out to the message and the plop into another que...but then there are two queues instead of just one which seems messy |
| 18:58.35 | eppigy | eric256: I think that is the announce |
| 18:59.05 | *** join/#asterisk empiric (n=empiric@116.71.58.44) |
| 18:59.12 | eric256 | but i only want to announce if they are full ;( lol.... they call in, if the queue is available go straight to a person, if it is busy then goto an IVR and from there to the same que |
| 18:59.15 | eppigy | have you even looked at a queues.conf sample? |
| 18:59.54 | empiric | hi i havevoip phones enables i want to dia out going cals through my telco network what i need a FXS gateway or FXO |
| 19:00.47 | eric256 | i've looked at several but obviously not the right ones ;( |
| 19:01.44 | drmessano^ | empiric: ~book |
| 19:02.14 | drmessano^ | Read.. Now.. Car.. Very.. Fast.. |
| 19:02.26 | lanning | ~book |
| 19:02.27 | jbot | it has been said that book is probably Asterisk: The Future of Telephony 2nd Edition (ISBN 0-596-51048-9) --- Order yours at http://www.oreilly.com/catalog/9780596510480/ --- Free downloadable PDF at http://www.asteriskdocs.org --- HTML at http://tfot.leifmadsen.com or see ~buybook |
| 19:02.33 | mvanbaak | ~tfm |
| 19:02.33 | jbot | tfm is probably The Fine Product Documentation |
| 19:02.38 | eppigy | eric256: the announce is used when the queues is full iirc |
| 19:02.54 | eppigy | I mean try experimenting |
| 19:03.13 | eric256 | i will, but so far it seems to always play the announce which is what the documentation suggests |
| 19:03.26 | eppigy | well dog |
| 19:03.28 | eppigy | log in |
| 19:03.32 | eppigy | and play around |
| 19:03.36 | eric256 | i have been |
| 19:03.38 | eric256 | ;) |
| 19:03.40 | eppigy | nice |
| 19:06.06 | eric256 | i was just looking for a gotoif that could branch based on the status of the que.../me keeps looking |
| 19:15.33 | *** join/#asterisk anthm (n=anthm@freeswitch/developer/anthm) |
| 19:20.43 | eric256 | looks like i can use QUEUE_MEMBER_COUNT to get the count of members...but how do i get the number of available agents/ |
| 19:20.45 | eric256 | ? |
| 19:23.44 | *** join/#asterisk andresmujica1 (n=andresmu@ubuntu/member/andresmujica) |
| 19:24.18 | *** join/#asterisk mrsci (n=mrsci@unaffiliated/mrsci) |
| 19:25.06 | eric256 | hmm guess i can bounce out to a script and parse the results of "show queue" |
| 19:29.03 | *** part/#asterisk andresmujica1 (n=andresmu@ubuntu/member/andresmujica) |
| 19:34.09 | *** join/#asterisk MmixX (n=mix@61.14.191.142) |
| 19:51.43 | *** join/#asterisk killown (n=Yamato@unaffiliated/killown) |
| 19:54.15 | *** join/#asterisk tagHirap (n=brutuz@ool-43532c6d.dyn.optonline.net) |
| 19:55.27 | tagHirap | hi all, is there a way to initiate a call from linux cli? or i need to create an application using the APIs which will directly communicate with the card |
| 19:57.07 | mvanbaak | tagHirap: two possibilities: callfiles or manager |
| 19:59.43 | tagHirap | mvanbaak: can those be executed from cron? |
| 19:59.56 | mvanbaak | yup |
| 20:01.38 | *** join/#asterisk bminish (n=bminish@rb.brenbox.home.minish.org) |
| 20:08.48 | *** join/#asterisk mat3schk3 (n=pat@dslb-084-063-100-102.pools.arcor-ip.net) |
| 20:12.01 | *** join/#asterisk joako (n=joako@opensuse/member/joak0) |
| 20:12.26 | [TK]D-Fender | tagHirap: Direct from CLI as well |
| 20:15.25 | *** part/#asterisk mat3schk3 (n=pat@dslb-084-063-100-102.pools.arcor-ip.net) |
| 20:15.45 | *** join/#asterisk propellerhead (n=yogurt2u@200.43.87.112) |
| 20:17.58 | *** join/#asterisk rbd (n=rbd@rrcs-96-10-27-206.se.biz.rr.com) |
| 20:41.42 | *** join/#asterisk ghento (n=ghento@d75-157-192-235.bchsia.telus.net) |
| 20:57.50 | *** join/#asterisk axisys (n=axisys@ip68-98-177-71.dc.dc.cox.net) |
| 20:58.37 | *** join/#asterisk russellb (n=russell@asterisk/digium-open-source-team-lead/russellb) |
| 20:58.37 | *** mode/#asterisk [+o russellb] by ChanServ |
| 21:08.47 | *** join/#asterisk Dj-Neo (n=Jarrings@220.235-247-81.adsl-dyn.isp.belgacom.be) |
| 21:08.57 | Dj-Neo | Hey! |
| 21:08.57 | Magicblaze007 | I want to try asterisk on a dedicated machine. Should I download a distribution and install asterisk ? |
| 21:09.07 | Dj-Neo | Who has already installed Asterisk on Vmware Server ? |
| 21:09.44 | Magicblaze007 | Dj-Neo: Why not virtualbox? |
| 21:10.33 | Magicblaze007 | Why is asterisk 1.4 and 1.6 versions available simultaneously. What is the difference? |
| 21:11.07 | jql | they are mutually incompatible, and not everyone is ready to port |
| 21:11.19 | Magicblaze007 | Thanks jql |
| 21:11.34 | Dj-Neo | Magicblaze007 I've a sound problem. Playback are played very low |
| 21:11.46 | Dj-Neo | And I don't know if this issue is due to vmware or not |
| 21:12.03 | Dj-Neo | slow |
| 21:12.05 | Dj-Neo | no low |
| 21:12.09 | Magicblaze007 | Why not try it on the native OS? unless its windoz? |
| 21:12.33 | [TK]D-Fender | Dj-Neo: playback of WHAT? Low in what way? general volume? Picth is too low? |
| 21:12.45 | [TK]D-Fender | Dj-Neo: what are you listening to it on? |
| 21:12.56 | Dj-Neo | Yes pitch is very low and it's difficult to understand |
| 21:13.05 | Dj-Neo | when I listen the playback like when I dial *97 |
| 21:13.22 | [TK]D-Fender | Dj-Neo: like its talking in slow motion? |
| 21:13.27 | Dj-Neo | yes |
| 21:13.37 | [TK]D-Fender | Dj-Neo: sounds like * isn't getting enough priority |
| 21:13.49 | Dj-Neo | I test it in LAN network |
| 21:13.55 | [TK]D-Fender | Dj-Neo: You should be able to Google a decent how-to for this |
| 21:14.09 | [TK]D-Fender | Magicblaze007: in answer to your first question, yes. |
| 21:14.24 | Dj-Neo | priority ? bandwiith ? |
| 21:14.39 | [TK]D-Fender | Dj-Neo: priorityI'm thinking |
| 21:15.00 | Dj-Neo | I've only installed * on the Centos VM |
| 21:15.04 | [TK]D-Fender | Dj-Neo: also check your virtual kernel'shz. * needs 1000 |
| 21:15.21 | Dj-Neo | how to check that ? |
| 21:15.22 | [TK]D-Fender | hz |
| 21:15.36 | [TK]D-Fender | Dj-Neo: Go ask in #vmware |
| 21:15.43 | Magicblaze007 | [TK]D-Fender: I just saw opensuse asterisk , and they only have 1.4 rpms. Anywhere I can find 1.6 rpms? Or do you recommend compiling from source? |
| 21:16.18 | [TK]D-Fender | Magicblaze007: I always recommend from source. SUSE has added "gotchas" concerning how they deal with kernel modules which may prove a PITA |
| 21:17.19 | Dj-Neo | [TK]D-Fender it's Elastix installed. |
| 21:17.41 | *** join/#asterisk carrar (i=tim@osburn.com) |
| 21:17.46 | carrar | w00t! |
| 21:18.09 | Magicblaze007 | [TK]D-Fender: isn't there a linux CD that comes with asterisk that I can install on virtualbox? |
| 21:18.56 | Magicblaze007 | and askterisknow preferably |
| 21:20.17 | [TK]D-Fender | Magicblaze007: Just install from source on a normal distro |
| 21:25.16 | *** join/#asterisk jaytee (n=jforde05@unaffiliated/jaytee) |
| 21:29.23 | *** join/#asterisk qdk (n=qdk@0x573d8c95.bynqu2.dynamic.dsl.tele.dk) |
| 21:35.52 | Magicblaze007 | Thanks |
| 21:44.16 | *** join/#asterisk killown (n=Yamato@unaffiliated/killown) |
| 21:49.15 | *** join/#asterisk flindman (n=flindman@ARennes-356-1-6-115.w86-214.abo.wanadoo.fr) |
| 21:52.31 | *** join/#asterisk ingenius (n=alektro@host16.190-136-29.telecom.net.ar) |
| 21:52.56 | *** join/#asterisk markgreene (n=markgree@c-76-27-144-75.hsd1.al.comcast.net) |
| 21:53.17 | *** join/#asterisk ManxPower (n=manxpowe@42.sub-75-202-38.myvzw.com) |
| 21:54.24 | markgreene | I've got a sangoma a200 fxo card that does not see callerID when recieving a call. Asterisk always routes to the s extension. Suggestions from anyone? |
| 21:56.11 | Khratos | Routing to the s extension not necessarily means that it is not seeing the callerID |
| 21:56.54 | Khratos | What you could to in order to verify is add a priority like 'exten => s,n,NoOP(${CALLERID(num)})' |
| 21:56.58 | *** join/#asterisk Telamon (n=telamon@blk-11-14-210.eastlink.ca) |
| 21:57.06 | thehar | and probably Set() it |
| 21:57.12 | Khratos | Just to see if you are getting the caller Id or not |
| 21:58.06 | Telamon | Anyone have any experience with Polycom phones? I have a bunch of 501s that suddenly have dead network ports after some office rewiring. They power up fine, but can't get a dhcp connection. |
| 21:58.16 | *** join/#asterisk MatBoy (n=MatBoy@wiljewelwetenhe.xs4all.nl) |
| 22:00.34 | markgreene | Khratos, when I call into my FXO port I need to know what exten is being called... possible? |
| 22:01.08 | thehar | Telamon: i had that problem a lot. it was my switches. |
| 22:01.46 | *** join/#asterisk jmacz (n=jmacz@190.25.35.100) |
| 22:05.47 | Telamon | thehar: How did you fix it? RMA the phones and replace the switch? I'm wondering if there is a software flash or a fuse to replace that will get the phones working by Monday. |
| 22:12.57 | *** join/#asterisk flindman (n=flindman@ARennes-356-1-82-223.w86-220.abo.wanadoo.fr) |
| 22:14.44 | thehar | Telamon: replaced my switches.. they were old as mud |
| 22:20.15 | thehar | we put some cheap dell gigabit switches in place.. since they were only for the voip vlan |
| 22:21.38 | Tales | I'm trying to set up an echo tester by the starfish book |
| 22:21.46 | Tales | But I always get this upon hangup: |
| 22:21.57 | Tales | <PROTECTED> |
| 22:22.16 | Tales | It does this if I'm connecting on an IAX or SIP soft phone |
| 22:23.12 | thehar | hrm |
| 22:24.12 | Tales | app_echo.so is loaded, but has a use count of 0 |
| 22:28.45 | [TK]D-Fender | Tales: PASTEBIn the entire call's CLI output. |
| 22:28.47 | [TK]D-Fender | ~pb |
| 22:28.48 | jbot | [~pb] A "pastebin" is a web-based service where you can paste anything over 3 lines without flooding the channel. Here are links to a few : http://www.pastebin.com , http://pastebin.ca , http://channels.debian.net/paste , http://paste.lisp.org , http://www.rafb.net/paste, or , http://bin.cakephp.org/ |
| 22:28.49 | [TK]D-Fender | ^^^^^^^^^^ |
| 22:28.52 | Tales | Sure. |
| 22:29.48 | Tales | http://paste.cluenet.org/1493 |
| 22:30.22 | [TK]D-Fender | Tales: Did you hangup yourself or did it just seem to disconnect you immediately? |
| 22:30.34 | Tales | I hung up myself after I wasn't getting any echoes. |
| 22:30.57 | Tales | .123 is the Windows desktop I'm running Zoiper on. |
| 22:31.06 | [TK]D-Fender | Tales: Seriousy double-check your soundcardcard settings |
| 22:31.26 | Tales | Microsoft Sound Mapper |
| 22:31.32 | [TK]D-Fender | Tales: Make sure the mic is enabled, that its checked as the recording source, etc. Enable live output, etc |
| 22:32.24 | Tales | Yup, mic is selected as the recording source and the volume is turned all the way up. |
| 22:34.14 | [TK]D-Fender | Tales: and you can hear yourself out your speakers? |
| 22:36.14 | Tales | Hear what I'm saying into the microphone out my speakers no., |
| 22:39.03 | *** part/#asterisk Telamon (n=telamon@blk-11-14-210.eastlink.ca) |
| 22:40.16 | [TK]D-Fender | Tales: Set your output settings so you can. |
| 22:40.28 | [TK]D-Fender | Tales: we need to rule out defective settings / equipment |
| 22:40.54 | Tales | well, my mic works in audacity |
| 22:42.15 | [TK]D-Fender | Tales: Keep playing around with your source settings, etc... |
| 22:42.44 | Tales | I'm going to test with a SIP softphone on my handheld computer |
| 22:44.01 | Tales | "No answer" |
| 22:44.36 | Tales | http://paste.cluenet.org/1494 |
| 22:44.39 | Tales | That's a CLI log of taht |
| 22:45.41 | Tales | Zoiper on desktop never goes past "State: Dialing" |
| 22:47.01 | Tales | And it's still there 2 minutes after I initiated the call |
| 22:47.51 | *** join/#asterisk path_ (n=path@pc-15-190-86-200.cm.vtr.net) |
| 22:48.48 | [TK]D-Fender | Tales: Oh wait! |
| 22:48.59 | [TK]D-Fender | Tales: do an ANSWER before you call "echo"/. |
| 22:49.24 | [TK]D-Fender | Tales: Actually, Answer(), then Playback(silence/1), then do you echo |
| 22:50.50 | Tales | Nowww it works. |
| 22:50.59 | [TK]D-Fender | :) |
| 22:51.04 | Tales | s/www/w/ |
| 22:51.12 | [TK]D-Fender | Tales: ~botsnack |
| 22:51.16 | [TK]D-Fender | ~botsnack |
| 22:51.16 | jbot | [TK]D-Fender: :) |
| 22:51.19 | [TK]D-Fender | there we go |
| 22:51.37 | *** part/#asterisk E-bola (i=psybnc@ip181.rev112.brygge.net) |
| 22:51.38 | [TK]D-Fender | Tales: Yeah I forgot that you have to establish audio or it will look like it does something... but doesn't |
| 22:51.56 | Tales | I blame the book |
| 22:52.27 | Tales | But now it works! |
| 22:52.36 | Tales | Thanks [TK]D-Fender, and now I'm off to dinner. |
| 22:53.45 | [TK]D-Fender | Tales: Enjoy |
| 22:53.52 | Tales | Later, I shall create my diabolical plan of having several IAXmodems and mgetty on them. |
| 23:15.01 | *** join/#asterisk andresmujica (n=andresmu@ubuntu/member/andresmujica) |
| 23:23.06 | Khratos | brb |
| 23:29.43 | *** join/#asterisk jjg (n=jjg@76.21.4.40) |
| 23:29.54 | jjg | does video work with the jingle integration? |
| 23:33.17 | *** join/#asterisk troubled (n=troubled@unaffiliated/troubled) |
| 23:36.14 | *** join/#asterisk Bonix (n=Bonix@200-195-41-212.isimples.com.br) |
| 23:38.20 | *** join/#asterisk obnauticus (n=obnautic@about/windows/regular/obnauticus) |
| 23:38.58 | *** join/#asterisk riddlebox (n=user@75-132-225-75.dhcp.stls.mo.charter.com) |
| 23:43.09 | jjg | jbot : test |
| 23:43.10 | jbot | Failed! |
| 23:43.16 | jjg | jbot : jingle |
| 23:43.31 | jjg | jbot : hi |
| 23:43.32 | jbot | hello, jjg |
| 23:43.40 | jjg | jbot : tell me about jingle |
| 23:44.11 | jjg | jbot, help |
| 23:49.37 | *** join/#asterisk criten (n=criten@216.75.233.220.exetel.com.au) |
| 23:51.08 | *** part/#asterisk andresmujica (n=andresmu@ubuntu/member/andresmujica) |
| 23:54.25 | *** join/#asterisk l0gis1c (n=logisic@adsl-75-30-229-231.dsl.pltn13.sbcglobal.net) |
