| 00:09.20 | *** join/#asterisk spiceycurry (~mcurry@CPE687f74121aa3-CM000f9fa76fda.cpe.net.cable.rogers.com) |
| 00:09.40 | spiceycurry | what can I use for a timing device (other than dahdi) as I am going with skype for asterisk |
| 00:11.59 | *** join/#asterisk diegomad (mad@186.81.139.74) |
| 00:12.44 | Corydon76-dig | If you're using a recent kernel, there's fdtimers |
| 00:13.03 | spiceycurry | Using 2.6.18-028stab064.4 |
| 00:13.04 | Corydon76-dig | Whatever you do, don't use the pthread timers |
| 00:13.10 | spiceycurry | ok cool |
| 00:13.22 | spiceycurry | thanks for the heads up |
| 00:14.18 | spiceycurry | know where I could get info on fdtimers to install it? |
| 00:14.23 | Corydon76-dig | If you're on BSD (or OS X), there's a kqueue timer in development |
| 00:14.38 | spiceycurry | using ubuntu 9.10 |
| 00:15.01 | Corydon76-dig | 2.6.22 is needed for timerfd |
| 00:15.13 | spiceycurry | crap |
| 00:15.38 | Corydon76-dig | http://lwn.net/Articles/245533/ |
| 00:15.40 | spiceycurry | if I could upgrade or recompile my kernel I could do that, or dahdi. |
| 00:17.23 | *** join/#asterisk hipitihop (~denis@203.132.229.236) |
| 00:18.11 | Corydon76-dig | There's the dahdidummy driver |
| 00:20.21 | *** join/#asterisk halkun (~chatzilla@mke-66-97-120-232.milwpc.com) |
| 00:20.27 | spiceycurry | I will give that a shot... though, last time I tried to compile dahdi, it wanted to compile kernel drivers |
| 00:21.25 | halkun | A while ago I was shown a very inexpensive VIOP gateway that was about $60. I can't recall it's brand name now. |
| 00:21.42 | TJNII | Why can't you touch the kernel? Hosted box or something like that? |
| 00:22.08 | halkun | It's actively supported by both the manufacturer and by Asterisk |
| 00:22.13 | dmz | spiceycurry are you on a virtual machine or physical? |
| 00:22.23 | spiceycurry | yea, its a virtual machine |
| 00:22.33 | dmz | there is a ztdummy module you can compile |
| 00:22.43 | dmz | it's in the dahdi source |
| 00:22.59 | halkun | I'm looking to have people call my land line and have the call foreward to a sip client on my android cell phone |
| 00:23.09 | spiceycurry | ok, I will see how far I can get with that... though, if it requires kernel drivers, I am fooked |
| 00:23.19 | dmz | it'll need the kernel headers |
| 00:23.29 | dmz | which vps company are you with? |
| 00:23.37 | spiceycurry | ultrahosting.com |
| 00:23.44 | dmz | ahh, too bad your not w/us ;) |
| 00:23.57 | halkun | (also backwards call from my sip phone go though the internets and back home to out my land line |
| 00:23.59 | spiceycurry | what company are ypu with? |
| 00:24.17 | spiceycurry | dmz: what hosting company are you with? |
| 00:24.19 | dmz | although we're not as "cheap" as them |
| 00:24.44 | dmz | zzservers, we don't oversell memory/disk/network/cpu/etc so we charge what it costs to run, so our prices are slightly higher |
| 00:24.51 | spiceycurry | sweet |
| 00:25.02 | halkun | oh! found it |
| 00:25.03 | dmz | i'm actually rebuilding the latest kernel this weekend so our hosts can support ztdummy |
| 00:25.11 | spiceycurry | sweet |
| 00:25.13 | halkun | SPA3102Sisco |
| 00:25.17 | spiceycurry | maybe I can switch over :D |
| 00:25.23 | halkun | Cisco SPA3102 |
| 00:25.39 | halkun | anyone have any experiance with this device? |
| 00:27.38 | spiceycurry | no hardware on my vps, so I take it, I will not need libPri -> correct/ |
| 00:27.40 | spiceycurry | ? |
| 00:28.28 | *** join/#asterisk luckyaba (~lucky@ip72-194-218-169.sb.sd.cox.net) |
| 00:29.40 | ariel_ | spiceycurry: not needed |
| 00:29.46 | spiceycurry | ok coo |
| 00:29.48 | spiceycurry | ty |
| 00:30.05 | ariel_ | spa3102 are fairly easy to setup and there are many doc's on how to set it up with asterisk |
| 00:33.02 | *** join/#asterisk slidesinger (~slidesing@c-68-44-99-50.hsd1.nj.comcast.net) |
| 00:34.12 | halkun | I'm just wondering because I have never ever played with VOIP before. So far I have an old dell that I put Linux on and a sip client on my cell phone. at home |
| 00:35.22 | halkun | At home I have DSL with a dynamic IP. I'll probably use some kind of DNS service (DyneDNS) so that I can at least connect to my home network with my SIP phone |
| 00:36.07 | halkun | Becasue my DSL modem uses PPPoE, I'm going to need to put the 3102 behind my already existing router. |
| 00:36.22 | halkun | unless the 3102 does PPPoE that is |
| 00:38.22 | ariel_ | ~thebook |
| 00:38.23 | infobot | extra, extra, read all about it, thebook is Asterisk: The Future of Telephony 2nd Edition (ISBN 0-596-51048-9) --- Order yours at http://www.oreilly.com/catalog/9780596510480/ --- Free downloadable PDF http://downloads.oreilly.com/books/9780596510480.pdf --- HTML at http://astbook.asteriskdocs.org |
| 00:38.38 | ariel_ | halkun: you should read |
| 00:39.27 | TJNII | ~sipnat |
| 00:39.28 | infobot | [~sipnat] Quick guide on configuring * + SIP behind NAT : http://www.aocomputing.net/?p=3 , otherwise check the WIKI at http://www.voip-info.org/wiki/view/Asterisk+SIP+NAT+solutions |
| 00:39.32 | spiceycurry | yum install moo |
| 00:39.33 | TJNII | Look at that, too. |
| 00:39.58 | spiceycurry | ~sex |
| 00:39.59 | infobot | [~sex] updatedb; locate; talk; date; cd; strip; look; touch; finger; unzip; uptime; gawk; head; emerge --oneshot condom; mount; fsck; gasp; more; yes; yes; yes; more; umount; emerge -C condom; make clean; sleep; |
| 00:40.38 | *** join/#asterisk Maliuta (~scooby@kiev.lusan.id.au) |
| 00:41.03 | spiceycurry | infobot, tell me how awsome I am |
| 00:41.43 | spiceycurry | infobot, tell infobot about recursive functions |
| 00:42.51 | spiceycurry | infobot |
| 00:43.07 | theshadow | I don't think infobot agrees :P |
| 00:43.28 | spiceycurry | infobot, recursive is a nasty trick |
| 00:43.29 | infobot | ...but recursive is already something else... |
| 00:43.42 | spiceycurry | infobot, what is recursive |
| 00:43.43 | infobot | ask me about recursive |
| 00:43.50 | spiceycurry | lol |
| 00:44.03 | theshadow | infobot: What is recursive? |
| 00:44.04 | infobot | ask me about recursive |
| 00:44.10 | theshadow | infobot: you fail. |
| 00:44.10 | infobot | ACTION slaps theshadow for calling her a failure |
| 00:44.15 | theshadow | lol |
| 00:44.18 | spiceycurry | ROFL |
| 00:44.27 | spiceycurry | infobot rules! |
| 00:44.28 | infobot | ACTION makes the rules. now stfu and code more addons. |
| 00:44.38 | spiceycurry | HAHA! |
| 00:44.49 | spiceycurry | infobot loves eliza |
| 00:44.51 | halkun | thanks for the PDF guys |
| 00:45.12 | spiceycurry | infobot, spiceycurry is the king |
| 00:45.13 | infobot | okay, spiceycurry |
| 00:45.26 | theshadow | infobot: Can you pass the turing test? |
| 00:45.39 | spiceycurry | infobot, tell me about spiceycurry? |
| 00:45.49 | theshadow | I think you broke it :P |
| 00:46.05 | spiceycurry | infobot, what is spiceycurry? |
| 00:46.06 | infobot | well, spiceycurry is the king |
| 00:46.14 | spiceycurry | thats fucking right |
| 00:46.37 | theshadow | lol only took... 3 tries! |
| 00:46.52 | spiceycurry | infobot, infobot is lesser than spiceycurry |
| 00:46.53 | infobot | ...but infobot is already something else... |
| 00:47.07 | spiceycurry | infobot, no, infobot is less than spiceycurry |
| 00:47.08 | infobot | spiceycurry: okay |
| 00:47.18 | spiceycurry | infobot, what is infobot |
| 00:47.18 | infobot | i heard infobot is less than spiceycurry |
| 00:47.32 | spiceycurry | infobot, what is mike curry? |
| 00:47.34 | infobot | spiceycurry: what are you talking about? |
| 00:47.52 | spiceycurry | infobot, what is spiceycurry? |
| 00:47.52 | infobot | i heard spiceycurry is the king |
| 00:47.59 | spiceycurry | ok, I am done here. |
| 00:48.03 | spiceycurry | j/k |
| 00:48.37 | spiceycurry | I hate updating via yum.. |
| 00:49.09 | spiceycurry | infobot, tell me a story |
| 00:52.46 | spiceycurry | infobot, I am bored |
| 00:52.47 | infobot | it is my pleasure to meet you, bored |
| 00:53.12 | spiceycurry | infobot, I am a dirty pirate hooker |
| 00:53.13 | infobot | it is my pleasure to meet you, a dirty pirate hooker |
| 00:55.32 | *** join/#asterisk moy (~moy@bas1-unionville55-1177733627.dsl.bell.ca) |
| 00:56.16 | TJNII | ~spiceycurry |
| 00:56.17 | infobot | hmm... spiceycurry is the king |
| 00:56.43 | TJNII | infobot, spiceycurry is a clueless newbie who molests the bot |
| 00:56.44 | infobot | ...but spiceycurry is already something else... |
| 00:56.51 | TJNII | infobot, no spiceycurry is a clueless newbie who molests the bot |
| 00:56.51 | infobot | TJNII: okay |
| 00:57.16 | TJNII | I'll just leave that for when he comes back. |
| 00:57.34 | *** join/#asterisk baddragon (yiffstar66@unaffiliated/devemo) |
| 01:00.37 | *** join/#asterisk wonderworld (~ww@ip-62-143-22-226.unitymediagroup.de) |
| 01:17.52 | *** join/#asterisk spiceycurry (~mcurry@CPE687f74121aa3-CM000f9fa76fda.cpe.net.cable.rogers.com) |
| 01:18.21 | *** join/#asterisk dkirker-openmobl (~dkirker@openmobl/ceo/dkirker) |
| 01:18.25 | spiceycurry | how do I install the EXACT kernel-source for my kernal again? yum install kernel-something`uname -r` |
| 01:24.16 | xheliox | kernel-devel |
| 01:25.58 | xheliox | kernel-devel-`uname -r` |
| 01:26.03 | spiceycurry | ok thanks |
| 01:26.18 | xheliox | And just how spicy is your curry? |
| 01:26.25 | spiceycurry | it's hot as shit |
| 01:26.26 | spiceycurry | lol |
| 01:26.37 | spiceycurry | even infobot things I am the king |
| 01:26.55 | spiceycurry | infobot, tell xheliox about spiceycurry |
| 01:27.15 | spiceycurry | ROGL |
| 01:27.16 | spiceycurry | rofl |
| 01:27.49 | spiceycurry | doh, I lose |
| 01:28.44 | *** join/#asterisk ehsjoar (~ehsjoar@c-98-245-155-132.hsd1.co.comcast.net) |
| 01:34.45 | jaytee | infobot, what is spicecurry |
| 01:34.46 | infobot | jaytee: what are you talking about? |
| 01:35.07 | jaytee | infobot who is spicecurry |
| 01:35.08 | infobot | jaytee: what are you talking about? |
| 01:35.27 | jaytee | it must not remember about people between sessions |
| 01:35.35 | TJNII | You typo'd the name |
| 01:35.52 | jaytee | infobot who is spiceycurry |
| 01:35.53 | infobot | spiceycurry is, like, a clueless newbie who molests the bot |
| 01:36.15 | spiceycurry | lol |
| 01:36.26 | jaytee | I was not the one who taught him that |
| 01:36.32 | spiceycurry | infobot, tell me about infobot |
| 01:36.46 | spiceycurry | infobot, tell about infobot |
| 01:37.14 | spiceycurry | infobot, tell everyone about infobot |
| 01:37.23 | jaytee | infobot, infobot is the most helpful and smartest of all bots |
| 01:37.23 | infobot | ...but infobot is already something else... |
| 01:37.28 | spiceycurry | no |
| 01:37.36 | spiceycurry | infobot, what is infobot |
| 01:37.36 | infobot | well, infobot is less than spiceycurry |
| 01:37.48 | spiceycurry | infobot: thats right bitch |
| 01:37.59 | jaytee | infobot, no, infobot is the most helpful and smartest of all the bots |
| 01:38.00 | infobot | jaytee: okay |
| 01:38.26 | jaytee | ~botsnack |
| 01:38.26 | infobot | jaytee: aw, gee |
| 01:38.45 | spiceycurry | infobot, jaytee is a hand grenade |
| 01:38.46 | infobot | ...but jaytee is already something else... |
| 01:38.51 | spiceycurry | what is jaytee |
| 01:39.00 | spiceycurry | infobot, what is jaytee |
| 01:39.01 | infobot | i guess jaytee is likes to play with the animals in the zoo |
| 01:39.06 | spiceycurry | lol |
| 01:39.22 | spiceycurry | infobot, tell infobot about recursion |
| 01:39.55 | spiceycurry | that should keep her busy for some time |
| 01:45.34 | *** join/#asterisk traderz (~traderz@c-67-184-227-156.hsd1.il.comcast.net) |
| 01:46.13 | traderz | i am behind nat and seem to be able to make calls outbound but don't seem to be able to get inbound calls. any ideas? |
| 01:46.21 | traderz | would be greatly appreciated |
| 01:46.28 | TJNII | ~sipnat |
| 01:46.29 | infobot | [~sipnat] Quick guide on configuring * + SIP behind NAT : http://www.aocomputing.net/?p=3 , otherwise check the WIKI at http://www.voip-info.org/wiki/view/Asterisk+SIP+NAT+solutions |
| 01:46.58 | TJNII | Though SIP/NAT issues generally manifest themselves as one-way audio |
| 01:47.13 | TJNII | Do you see the call attempt in sip debug? Are you registered to the provider? |
| 01:47.22 | traderz | i am registered yes |
| 01:47.36 | *** join/#asterisk liglag (genericdev@tn-76-5-157-207.sta.embarqhsd.net) |
| 01:48.01 | *** join/#asterisk coppice (~chatzilla@191.193.17.210.dyn.pacific.net.hk) |
| 01:48.21 | ChannelZ | You probably need port forwarding or STUN to keep the door propped open for inbound traffic |
| 01:49.03 | traderz | ok i will do some reading then |
| 01:49.09 | TJNII | Again, Do you see the call attempt in sip debug? |
| 01:49.18 | traderz | i did see the call attempt yes |
| 01:49.39 | TJNII | Than it isn't a NAT issue. |
| 01:49.52 | ChannelZ | RTP becomes a bitch. Has anyone played with the SIP iptables nat module for linux? |
| 01:50.18 | traderz | i dont think so |
| 01:50.20 | TJNII | I had to unload it. |
| 01:50.34 | traderz | let me see if its loaded |
| 01:50.44 | TJNII | I use shorewall, but that is just an iptables wapper. Calls wouldn't work with that module loaded. |
| 01:51.10 | TJNII | This was a couple years back, though. I haven't tried it since. |
| 01:51.12 | ChannelZ | I wasn't sure what it did, if it monitored SIP packets to open up the correct RTP ports or if it actually re-wrote SIP, etc. |
| 01:51.27 | *** join/#asterisk KingDavidNYC (~Chris1232@pool-71-190-78-39.nycmny.east.verizon.net) |
| 01:51.28 | ChannelZ | Not sure where these things are documented |
| 01:54.36 | KingDavidNYC | hello, can anybody please point me how to install a svn patch? |
| 01:55.04 | traderz | could it have anything to do with the context setting in teh trunk? |
| 01:56.02 | TJNII | Yes. Console debug should tell you that. |
| 01:56.08 | ChannelZ | it could but that would not be a NAT problem |
| 01:56.20 | ChannelZ | So maybe you could help us help you by posting a failed call |
| 01:56.29 | traderz | ok |
| 01:59.21 | ChannelZ | waits not patiently for the oven to heat up |
| 02:00.13 | TJNII | realizes his truck needs a repair he can't do himself |
| 02:01.19 | liglag | I'm having issues with "follow me" and out bound calls, I'm thinking the out bound sip device isn't resetting fast enough. Does anyone know how to force a pause between outbound dials? |
| 02:02.40 | TJNII | Do it in the dialplan. Use wait() |
| 02:04.01 | liglag | Can I do that via the gui or only by editing the conf file itself? |
| 02:04.24 | TJNII | groans |
| 02:04.53 | liglag | I'm assuming thats a stupid question then |
| 02:04.56 | TJNII | You'll want to seek help in the correct channel for your GUI. |
| 02:05.01 | *** join/#asterisk mindCrime (~chatzilla@64.134.184.174) |
| 02:06.42 | ChannelZ | we need a /join nagbot |
| 02:06.48 | TJNII | haha |
| 02:06.54 | liglag | Thank you, sorry for my ignorance. |
| 02:13.04 | KingDavidNYC | anybody knows how to install a patch? |
| 02:14.26 | TJNII | man patch |
| 02:16.05 | KingDavidNYC | type in "man patch XXXX.svndiff"? |
| 02:17.14 | TJNII | No, type in "man patch" and read how to use the patch utility. |
| 02:17.23 | *** join/#asterisk zerohalo (~zerohalo@cambridge.zerohalo.com) |
| 02:17.37 | TJNII | Though I've never used a "svndiff." It may be in a different format. |
| 02:18.12 | KingDavidNYC | right, that's what I mean if anybody done it |
| 02:18.15 | *** join/#asterisk pabelanger_ (~pabelange@CPE0013f7abc09a-CM0013f7abc096.cpe.net.cable.rogers.com) |
| 02:18.41 | *** join/#asterisk zerohalo (~zerohalo@cambridge.zerohalo.com) |
| 02:21.40 | *** join/#asterisk zerohalo (~zerohalo@cambridge.zerohalo.com) |
| 02:23.09 | *** join/#asterisk zerohalo (~zerohalo@cambridge.zerohalo.com) |
| 02:25.41 | *** join/#asterisk JAMMAN2110 (~james@unaffiliated/jamman2110) |
| 02:53.35 | *** join/#asterisk RobH (~robh@wikimedia/RobH) |
| 03:08.47 | *** part/#asterisk jaskew (~jdaskew@netblock-75-79-182-110.dslextreme.com) |
| 03:13.24 | *** join/#asterisk mtonkey (~mtonkey@c-69-181-126-126.hsd1.ca.comcast.net) |
| 03:13.42 | *** part/#asterisk mtonkey (~mtonkey@c-69-181-126-126.hsd1.ca.comcast.net) |
| 03:14.35 | *** join/#asterisk mindCrime (~chatzilla@cpe-075-189-213-049.nc.res.rr.com) |
| 03:24.11 | *** join/#asterisk JT (~j@unaffiliated/jt) |
| 03:29.55 | *** join/#asterisk baddragon (yiffstar66@unaffiliated/devemo) |
| 03:32.49 | *** join/#asterisk drachenfels2 (~king@91.142.36.77) |
| 03:33.34 | drachenfels2 | I'm trying to further troubleshoot the following issue https://issues.asterisk.org/view.php?id=16936 |
| 03:35.01 | drachenfels2 | I've enabled DEBUG_SCHEDULER and DUMP_SCHEDULER flags, anyone with idea of what to do next? |
| 03:36.57 | p3nguin | What is the feature called where I got called by someone and my phone sends caller ID to the phone which called me? |
| 03:39.14 | drachenfels2 | i've never heard of such a feature |
| 03:39.23 | p3nguin | or if callerA calls to callerB, and callerB calls me and initiates a transfer... at which time my info appears on callerA's phone? |
| 03:39.27 | *** join/#asterisk cosmicwombat (~cosmicwom@69.7.44.68) |
| 03:39.36 | *** join/#asterisk riddlebox (~riddlebox@75-132-225-75.dhcp.stls.mo.charter.com) |
| 03:40.32 | drachenfels2 | i would have thought this would be set with CALLERID in an extension context |
| 03:40.54 | drachenfels2 | oh, no wait... |
| 03:41.01 | drachenfels2 | I'm sure caller ID is one way only |
| 03:41.19 | p3nguin | For explanation purposes, it's like a reverse caller iD. |
| 03:41.43 | p3nguin | I'm looking for the technical terminology to describe this. |
| 03:42.08 | drachenfels2 | I've never heard or seen this on a phone system before... |
| 03:42.24 | drachenfels2 | sorry |
| 03:42.35 | p3nguin | It exists. But unfortunately I don't know any better way to describe it. |
| 03:43.02 | p3nguin | Occasionally we get people through here looking to set up such configuration on Asterisk. |
| 03:43.09 | drachenfels2 | I've only ever heard of presentation number and caller id |
| 03:43.28 | [TK]D-Fender | p3nguin: .... |
| 03:43.30 | [TK]D-Fender | ~cpid |
| 03:43.32 | infobot | [~cpid] Called-Party ID is possible with * using patches on Mantis. See : http://bugs.digium.com/view.php?id=8824 |
| 03:43.42 | p3nguin | oh |
| 03:46.48 | KingDavidNYC | does anybody here can please give me a pointer on how to install a patch with svndiff? |
| 03:48.40 | drachenfels2 | patch -p0 < mypatch |
| 03:49.49 | KingDavidNYC | thank you. does it matter if I installed using a tar file? |
| 03:49.58 | KingDavidNYC | ....and not the svn? |
| 03:50.50 | ChannelZ | not really |
| 03:50.58 | KingDavidNYC | ok thanks |
| 03:53.58 | *** join/#asterisk kartik (~koolkarti@117.207.84.39) |
| 03:57.02 | *** join/#asterisk seanjohn (~shanebrig@mail.sheltoncomputers.com) |
| 03:57.21 | seanjohn | is there an advantage of recording slin files when you use g729? |
| 03:58.14 | *** join/#asterisk Jumpie (~lah@c-76-111-80-110.hsd1.va.comcast.net) |
| 04:00.27 | [TK]D-Fender | no |
| 04:01.40 | p3nguin | My thought is that there might be slightly less overhead because you're not having to transcode into yet another format, since sln is asterisk's native format. Is this faulty thinking? |
| 04:08.33 | Jumpie | man im loving ssh tunnels |
| 04:12.05 | p3nguin | You must be new. |
| 04:12.23 | Jumpie | no |
| 04:12.26 | Jumpie | just not done it this way |
| 04:12.34 | Jumpie | i guess what i meant is...love how easy it is to do with putty |
| 04:12.35 | Jumpie | heh |
| 04:12.52 | Jumpie | hmm...im using a softphone and when i hung up the call it said "overall call jitter=3.19ms" |
| 04:12.58 | Jumpie | is that a gauge i can use to tweak some settings? |
| 04:13.00 | p3nguin | You're probably still using the PuTTY GUI for it, too. |
| 04:13.12 | Jumpie | p3nguin...thats what im saying..im used to NOT having a gui |
| 04:13.43 | p3nguin | I'd recommend using a batch script if you need to bring up the tunnel very often. |
| 04:13.52 | p3nguin | screw all that gooey crap. |
| 04:14.13 | Jumpie | do you have to stay logged into the host ssh to keep the other service you're forwarding up? |
| 04:14.18 | Jumpie | or does it break the second you break the ssh |
| 04:14.22 | Jumpie | not sure if its there for setup, or for continuan |
| 04:14.57 | p3nguin | Bring up the tunnel, pass traffic through it. If the ssh connection is broken, there is no tunnel for traffic to go through. |
| 04:15.34 | Jumpie | well i guess i wasnt sure if once it had been established, it continued to do the forwarding behind the scenes or somethin |
| 04:15.37 | Jumpie | i guess that doesnt make sense |
| 04:15.40 | Jumpie | :P i figured the answer wa sno |
| 04:16.10 | Jumpie | can you forward multiple ports on one ssh connections? |
| 04:16.16 | p3nguin | yes |
| 04:16.59 | Jumpie | <PROTECTED> |
| 04:17.07 | Jumpie | like when im forwarding https internally |
| 04:17.15 | Jumpie | going back, and redoing it fixes it |
| 04:18.11 | *** join/#asterisk ManxPower (~manxpower@81.sub-75-234-153.myvzw.com) |
| 04:22.11 | Jumpie | man i want the diners, driveins, and dives job that guy has on foodnetwork |
| 04:22.12 | Jumpie | lol |
| 04:22.24 | Jumpie | get paid to travel all over the country and help make/eat food thats fantastic |
| 04:30.03 | *** join/#asterisk baddragon (yiffstar66@unaffiliated/devemo) |
| 04:41.39 | *** join/#asterisk Andrew_M (~60fa1253@gateway/web/freenode/x-jpclupzrybkustzi) |
| 04:43.49 | *** join/#asterisk mintos (~mvaliyav@nat/redhat/x-hfzzuifyeytfqkqr) |
| 04:43.55 | Jumpie | hey p3nguin any good MOH sources you know of? |
| 04:43.59 | Jumpie | lookin for a few sinatra snippets |
| 04:52.39 | *** join/#asterisk [8none1] (~8none1]@cerberus.franklinamerican.com) |
| 05:07.52 | *** join/#asterisk hipitihop (~denis@203.132.229.236) |
| 05:12.17 | ChannelZ | try a CD store |
| 05:13.01 | ManxPower | MMMmmm...nothing like the smell of unlicensed music in the morning |
| 05:13.27 | ChannelZ | mmmhmmmm! |
| 05:13.42 | Kyosh | heh |
| 05:17.16 | *** part/#asterisk Fairman (~Fairman@c-24-23-61-12.hsd1.ca.comcast.net) |
| 05:17.48 | Andrew_M | For MOH look at http://en.wikipedia.org/ wiki/Wikipedia:Sound/list and http://www.opsound.org/. |
| 05:21.37 | ChannelZ | hmm. Some server at Microsoft is trying really hard to send me an email with stray newlines |
| 05:22.05 | ChannelZ | Protocol standards? Who needs them! |
| 05:23.14 | *** join/#asterisk baddragon (yiffstar66@unaffiliated/devemo) |
| 05:37.53 | *** join/#asterisk smooth_penguin (~smoove@59.95.29.84) |
| 06:20.25 | *** join/#asterisk Akiraa (~Akiraaaa@79.112.33.79) |
| 06:25.05 | Akiraa | Is there a (preferably free) web-based softphone you would recommend? Would be used as a way for a client to place a call directly from our website |
| 06:41.47 | *** join/#asterisk hipitihop (~denis@203.132.229.236) |
| 06:46.17 | *** join/#asterisk Micc (~quassel@c-98-225-57-96.hsd1.wa.comcast.net) |
| 06:46.40 | Micc | My fax session counter keeps getting stuck |
| 06:47.01 | Micc | it shows I have 3 current sessions in fax show stats, but fax show sessions shows nothing. |
| 06:47.17 | Micc | and when I try to receive a new fax it says max liceses |
| 06:47.41 | Micc | res_fax_digium.c: Cannot create FAX session - session limit exceeded (max: 3). |
| 06:47.56 | Micc | but theres no other sessions at the time. |
| 06:51.03 | coppice | I think you will need to contact Digium directly about that. there aren't many paid up users of fax for asterisk using this forum |
| 07:02.59 | *** join/#asterisk TJ^ (~TJ@193.47.83.49) |
| 07:07.56 | *** join/#asterisk mr_ian (~mr_ian@S0106001b63f49383.du.shawcable.net) |
| 07:08.21 | Jumpie | lol |
| 07:08.36 | Jumpie | coppice is that like when khaled mardam bey celebrated his 5th registration in 10 years |
| 07:08.44 | Jumpie | haha...i jest |
| 07:12.03 | *** join/#asterisk lobo99 (~jose@84.36.221.87.dynamic.jazztel.es) |
| 07:12.09 | coppice | sounds like a steady income |
| 07:12.36 | lobo99 | hello! I have x100p. Works with dahdi or with zaptel? |
| 07:42.54 | *** join/#asterisk romb (~romb@unaffiliated/romb-work/x-7222485) |
| 07:49.23 | *** join/#asterisk maxagaz (~maxagaz@soho2.i-xanadu.com) |
| 07:51.28 | Jumpie | hahah i been beating myself up as to why im getting caller id unknown on a particular trunk |
| 07:51.35 | Jumpie | apparently that particular verizon line doesnt have CID service |
| 07:51.37 | Jumpie | :P |
| 07:52.07 | Jumpie | but....i thought 'caller id' service wsas like...name/company name |
| 07:52.12 | Jumpie | i thought the number itself was always passed |
| 07:58.46 | coppice | caller ID is a relatively modern service. It was rare until the late 90s. its certainly not a given |
| 08:00.57 | *** join/#asterisk af_ (~getsmart@88-149-240-255.dynamic.ngi.it) |
| 08:01.09 | Jumpie | but i thought caller id..the big deal was basically name+num |
| 08:01.21 | Jumpie | but the concept fo the number of those calling...is required in regards to routing so |
| 08:01.30 | Jumpie | i figured it'd always be passed to the callee |
| 08:01.31 | Jumpie | guess not |
| 08:04.23 | coppice | until about 1990 is was technically impractical to actually get the number to the callee, unless they were a big user with E1 or T1 lines |
| 08:08.36 | Jumpie | so i guess since this customer only had this line for faxes...may have not opted to add it to the line? |
| 08:08.48 | Jumpie | i was just pretty sure..when we tested at the fax machine....i could see the incoming caller # |
| 08:08.53 | coppice | very likely |
| 08:09.02 | Jumpie | but...when i call into the trunk...non fax....i get unknown/unknown |
| 08:09.08 | Jumpie | the configs are pretty much identical cept the # is different |
| 08:09.19 | coppice | the FAX machine does not display caller ID. It displays a number the other FAX machine sends it |
| 08:09.38 | Jumpie | even on the screne? |
| 08:09.41 | Jumpie | screen |
| 08:09.45 | Jumpie | im not talkin the fax received on the header |
| 08:10.06 | Jumpie | like when hook picked up it said 'incoming call from xxxxxxxxxxX" |
| 08:10.12 | coppice | the LCD on FAX machines normally displays a number sent by the other FAX machine |
| 08:10.17 | Jumpie | hmm..no kidding |
| 08:10.31 | Jumpie | i guess the easiest way to be for sure is get a cheap analog phone w/ CID |
| 08:10.37 | coppice | yes, because when FAX machines started nobody had caller ID |
| 08:10.49 | Jumpie | i've been going nuts on this till i tried the other trunk(main line) and it came through fine |
| 08:10.57 | Jumpie | yea..this is one of thiose all in ones |
| 08:28.03 | Akiraa | What is such a thing as a "sip-capable firewall"? http://en.wikipedia.org/wiki/List_of_SIP_software#SIP-capable_firewalls |
| 08:30.35 | Jumpie | coppice |
| 08:30.38 | Jumpie | noticed something interesting |
| 08:30.48 | Jumpie | since it seems this line doesnt have cid |
| 08:30.58 | Jumpie | and this is primarily for a fax.... |
| 08:31.11 | Jumpie | when a non fax call comes in...and it by passes the fax extension and goes to the next destination |
| 08:31.21 | Jumpie | the callerid is overwriten with the callerid/name of the passed over fax extension |
| 08:31.24 | Jumpie | is this natural? |
| 08:42.18 | ChannelZ | Akiraa: A 'SIP-capable firewall' (or anything-capable really) watches the traffic passing through it and understands certain protocols, so it can add port forwarding or even change packets to make them work through NAT |
| 08:43.43 | Akiraa | ChannelZ: what's a scenario where such a device would be useful? |
| 08:44.07 | ChannelZ | When you have SIP devices behind a firewall |
| 08:44.28 | Akiraa | the alternative being port forwarding? |
| 08:45.12 | ChannelZ | yes and making sure the device is setup to do NAT, or having the server side have to know the remote end is using NAT, which sometimes you don't have control of |
| 08:46.12 | ChannelZ | like in * when you set a peer to nat in sip.conf, it tells * to ignore the IP address in the SIP headers (which is usually a phony LAN IP of the device behind the firewall which is unroutable) and send packets for that peer back to the IP address they came from |
| 08:47.03 | ChannelZ | if the device was behind a SIP-aware firewall, the firewall its self could fudge the outgoing packets and replace the phony IP with the real one so the remote end wouldn't have to know the peer was behind a firewall |
| 08:47.49 | ChannelZ | plus it can watch the SIP packets and automatically setup the correct forwards so the RTP packets make it back through the firewall without manual port forwarding |
| 08:58.23 | *** join/#asterisk Ad-Hoc (~nimbus@62.1.142.15.dsl.dyn.forthnet.gr) |
| 09:00.22 | Akiraa | ChannelZ: thanks, will be looking into that |
| 09:07.51 | *** join/#asterisk aidinb (~Aidin@71-94-148-218.static.mtpk.ca.charter.com) |
| 09:10.15 | *** join/#asterisk sourcode (~code@ppp-58-8-237-38.revip2.asianet.co.th) |
| 09:15.00 | *** join/#asterisk halkun (~halkun@officegateway.ethostream.com) |
| 09:15.21 | halkun | Ok, I'm going though the starfish book and I have a few questions |
| 09:16.56 | halkun | I'm going to be investing in a SPA3102 voip gateway |
| 09:17.49 | halkun | now the starfish book is harping on something called a Zaptel device for using asterisk |
| 09:18.22 | ChannelZ | the 3102 doesn't fall under Zaptel (now DAHDI) |
| 09:18.51 | ChannelZ | though you'd need to build one of them if you want to do anything like conferencing or call recording |
| 09:19.04 | halkun | No, Here's my project |
| 09:19.14 | halkun | I have an android phone with a sip client on it |
| 09:19.18 | Akiraa | zaptel are drivers for PCI/PCIe telephony cards residing in the same machine |
| 09:19.27 | halkun | That's what I thought |
| 09:19.43 | halkun | so I'll just rig for VoIP only |
| 09:20.12 | halkun | and I let the 3102 deal with the analog interface |
| 09:21.35 | halkun | Now the idea is I want to use my sip client on my android phone to connect to my asterisk server when I'm in a Wifi spot when I'm out and about |
| 09:22.01 | halkun | I would then like to have the asterisk server "dial out" on my home phone line. |
| 09:22.08 | halkun | This is compleatly doable right? |
| 09:22.39 | ChannelZ | yeah |
| 09:23.26 | halkun | and the reverse is also true, you call my home and it will ring my sip phone if I'm in a wifi spot |
| 09:23.41 | ChannelZ | sure |
| 09:24.11 | halkun | Ok, I just wanted to make extra special sure. I don't want to blow $60 on a glorified router if it doesn't work |
| 09:24.35 | halkun | I'm just trying to give my cell phone service without going though the cell company :) |
| 09:29.53 | ChannelZ | stick it to the man |
| 09:34.24 | carrar | heh |
| 09:36.50 | halkun | Ok, I'm gonna buy the 3102 today... I hope this sn't going to be too painful... |
| 09:37.44 | halkun | I have the PC already. It's a dell 1.2 with a gig of ram. Unbuntu Hardy Haron |
| 09:38.07 | ChannelZ | the 3102 is a strange little device |
| 09:38.08 | halkun | I'll probably go with a prebuilt binary for now |
| 09:38.18 | halkun | I read somewhere that some ore "locked" |
| 09:49.17 | halkun | quit |
| 09:58.38 | *** join/#asterisk MhaddogM1 (~MhaddogM1@adsl-64-223-140.mia.bellsouth.net) |
| 10:01.52 | *** join/#asterisk viq (~viq@unaffiliated/viq) |
| 10:04.22 | *** join/#asterisk gr0mit (~tim@81.187.67.134) |
| 10:06.54 | *** join/#asterisk sun28 (~light@sun28.ipfw.su) |
| 10:10.34 | *** join/#asterisk hehol (~Adium@ip-78-94-0-76.unitymediagroup.de) |
| 10:22.01 | *** join/#asterisk angryuser_laptop (~angryuser@90-156-167-83.reverse.alphalink.fr) |
| 10:27.40 | Akiraa | ChannelZ: how so? "the 3102 is a strange little device" |
| 10:30.19 | *** join/#asterisk kartik (~koolkarti@117.207.80.100) |
| 10:31.23 | *** join/#asterisk Wildy (~simba@mas4-gw.pleer.ru) |
| 10:38.10 | coppice | its reflection cannot be seen in a mirror :-) |
| 10:47.12 | *** join/#asterisk viq (~viq@unaffiliated/viq) |
| 10:53.53 | Akiraa | they are not easy to configure, but have a lot of settings |
| 11:15.21 | *** join/#asterisk imox1234 (~imox1234@p4FC5C4D8.dip0.t-ipconnect.de) |
| 11:15.43 | imox1234 | hello, when i compile asterisk i get this error: configure: *** or install the 'libxml2' development package. |
| 11:16.03 | imox1234 | which package i have to install thats its run ? |
| 11:17.39 | |amadeus| | what about libxml2-dev? :))) |
| 11:18.21 | imox1234 | hmm ok i found this, it was libxml2-devel :-) thanks |
| 11:18.49 | |amadeus| | gern :) |
| 11:19.01 | imox1234 | du you speak german ? |
| 11:19.35 | |amadeus| | actually i _am_ german ;) |
| 11:30.20 | *** join/#asterisk TimeRider (steve@5ac7b349.bb.sky.com) |
| 12:11.19 | *** join/#asterisk JAMMAN2110 (~james@unaffiliated/jamman2110) |
| 12:11.31 | *** join/#asterisk MiserySoft (~LND@89.193.4.101) |
| 12:13.11 | *** join/#asterisk riddlebox (~riddlebox@75-132-225-75.dhcp.stls.mo.charter.com) |
| 12:27.51 | *** join/#asterisk timholum (~AndChat@73.sub-97-189-132.myvzw.com) |
| 12:28.12 | timholum | Hello everyone |
| 12:29.19 | *** join/#asterisk pinoyskull (~pinoyskul@112.198.64.91) |
| 12:29.36 | *** join/#asterisk jsjc (~chatzilla@global210.lnk.telstra.net) |
| 12:30.33 | jsjc | I am looking to have a few dialout sIP accounts within my asterisk so if I wanted after sending Dial trough a SIP account if anyhting does not go right to use the "2nd" one and so on. What I should be looking at to read about? where I could find some info? |
| 12:31.05 | *** join/#asterisk vader-- (~me@c-71-225-201-226.hsd1.nj.comcast.net) |
| 12:31.16 | *** join/#asterisk romb (~romb@unaffiliated/romb-work/x-7222485) |
| 12:35.28 | ariel_ | ~thebook |
| 12:35.28 | infobot | thebook is probably Asterisk: The Future of Telephony 2nd Edition (ISBN 0-596-51048-9) --- Order yours at http://www.oreilly.com/catalog/9780596510480/ --- Free downloadable PDF http://downloads.oreilly.com/books/9780596510480.pdf --- HTML at http://astbook.asteriskdocs.org |
| 12:36.03 | timholum | Jsjc most sip providers allow you to have multiple outbound lines with one sip trunk |
| 12:36.59 | jsjc | timholum: the one I have does not so that is why I want to have that so I can go trough various SIP accounts I have. |
| 12:37.20 | timholum | I use voip.ms and have all outbond calls over it. It costs me 1.5 cents per min per call |
| 12:39.00 | ariel_ | jsjc: it's just a simple way to have the next line dial our for you, exten => _X.,1,Dial(sip/blah1) next one exten => _X.,n,Dial(sip/blah2) |
| 12:39.12 | timholum | Jsjc, I would search for failover or something like that. But I can't tell you for sure becouse I have never done it |
| 12:39.48 | jsjc | will go and do a bit of research on it |
| 12:39.49 | ariel_ | it's a simple dial plan rule if one is busy it goes to the next line, |
| 12:40.01 | jsjc | I sue 12voip.com adn has 2 outbound channels i think |
| 12:40.22 | timholum | Ariel_ wouldent that dial the same number again once it hangs up |
| 12:40.29 | ariel_ | no |
| 12:40.38 | ariel_ | it goes to the next line |
| 12:40.48 | ariel_ | it's up to you to put the settings for the sip account there |
| 12:40.55 | ariel_ | read the book it has samples |
| 12:40.59 | ariel_ | and explains it |
| 12:42.19 | timholum | Ya but if it picks up on the first line. You hang up it will dial again on the second line and so on until it is done |
| 12:42.40 | ariel_ | first one does not acept call it goes to the next line |
| 12:42.45 | ariel_ | your not hanging up |
| 12:43.14 | ariel_ | you create what you want done via the dial plan |
| 12:43.18 | timholum | Correct. I know that part of it will work |
| 12:43.39 | ariel_ | if the provider does not acept the call it moves on to the next line |
| 12:43.54 | ariel_ | if it accepts the call well that is up to the provider to finish it up |
| 12:44.01 | timholum | I agree with that part |
| 12:45.04 | *** join/#asterisk farkus (chatzilla@cpe-72-225-212-219.nyc.res.rr.com) |
| 12:45.20 | timholum | But if the first line is not busy it will make the call on the first line and when that call is done it will make the call again on the second |
| 12:45.31 | ariel_ | no |
| 12:46.02 | ariel_ | if it makes call connects, then when it hands up it comes back to the h line |
| 12:46.11 | ariel_ | it's up to you to do the next thing via the h |
| 12:46.35 | ariel_ | it's made that way |
| 12:47.05 | ariel_ | once you connect the channels then it jumps to the h or t for timeout. |
| 12:47.15 | timholum | Ok. I will have to look at that when I am at a computer |
| 13:00.26 | *** join/#asterisk rossand (~aross@CPE000c413a19a3-CM00159a025ad4.cpe.net.cable.rogers.com) |
| 13:04.37 | *** join/#asterisk riddlebox (~riddlebox@75-132-225-75.dhcp.stls.mo.charter.com) |
| 13:11.46 | *** join/#asterisk aceio (~5188dc77@gateway/web/freenode/x-drpvixeczgikdmuy) |
| 13:11.59 | aceio | hi all |
| 13:12.09 | aceio | i need some help |
| 13:12.46 | aceio | i have manage to setup internal call which works fine |
| 13:12.49 | *** join/#asterisk Belgarath (~Belgarath@banda.pl) |
| 13:13.48 | aceio | now i need to configure the b410p isdn card to be able too dial and rec incoming call |
| 13:14.19 | aceio | any help would be nice |
| 13:16.36 | *** join/#asterisk Sipster (~Sipster@modemcable045.5-200-24.mc.videotron.ca) |
| 13:18.27 | *** join/#asterisk neurosys (~neurosys@c-71-196-20-208.hsd1.fl.comcast.net) |
| 13:19.10 | aceio | i am getting the following output on asterisk http://pastebin.com/GFjMqqjs |
| 13:19.26 | aceio | when i am trying to dial an outside line |
| 13:26.18 | *** join/#asterisk ccesario (~ccesario@189-19-6-236.dsl.telesp.net.br) |
| 13:28.09 | *** join/#asterisk MhaddogM1 (~MhaddogM1@adsl-64-223-140.mia.bellsouth.net) |
| 13:35.31 | *** join/#asterisk RobH (~robh@wikimedia/RobH) |
| 13:41.44 | riddlebox | what is the best way to purge my messages log? just rm the logfile? |
| 13:49.54 | *** join/#asterisk leifmadsen (~Leif@asterisk/documenteur-extraordinaire/blitzrage) |
| 13:49.54 | *** mode/#asterisk [+o leifmadsen] by ChanServ |
| 13:50.46 | *** join/#asterisk cosmicwombat_ (~cosmicwom@69.7.44.68) |
| 13:51.34 | *** join/#asterisk cosmicwombat (~cosmicwom@69.7.44.68) |
| 13:57.57 | *** join/#asterisk RypPn (~TuMbL@rosscom.co.uk) |
| 14:04.16 | *** join/#asterisk s4msung (~s4msung@dice.s4msung.de) |
| 14:09.43 | *** join/#asterisk riddlebox (~riddlebox@75-132-225-75.dhcp.stls.mo.charter.com) |
| 14:17.40 | *** join/#asterisk Iamnacho (~Iamnacho@ip174-70-139-208.ks.ks.cox.net) |
| 14:45.11 | *** join/#asterisk MhaddogM1 (~MhaddogM1@adsl-64-223-140.mia.bellsouth.net) |
| 14:46.24 | *** join/#asterisk cesar_CR (~cesar@201.201.41.242) |
| 14:49.21 | *** part/#asterisk jmls (~jmls@host217-36-208-155.in-addr.btopenworld.com) |
| 15:15.09 | *** join/#asterisk tzafrir_laptop (~tzafrir@bzq-218-155-148.cablep.bezeqint.net) |
| 15:15.49 | *** join/#asterisk atis_work (~atis_work@193.238.212.171) |
| 15:17.34 | Nugget | cp /dev/null logfile |
| 15:24.04 | dzup | if i use a "tormenta 3" w * in a 'e1' line how many calls can i have at the same time? |
| 15:27.16 | *** join/#asterisk romb (~romb@unaffiliated/romb-work/x-7222485) |
| 15:29.15 | *** join/#asterisk path (path@gateway/shell/bshellz.net/x-bziccvjpiohusjrd) |
| 15:29.21 | jaytee | dzup, 30 voice channels so 30 concurrent calls |
| 15:48.07 | *** join/#asterisk TJNII (~TJNII@207.189.199.62) |
| 15:56.55 | *** join/#asterisk Jumpie (~lah@c-69-255-192-97.hsd1.dc.comcast.net) |
| 16:16.38 | *** join/#asterisk [TK]D-Fender (~chatzilla@216.191.106.163) |
| 16:30.58 | *** join/#asterisk lhz (~shrekz@c-b9aa72d5.021-158-73746f34.cust.bredbandsbolaget.se) |
| 16:31.42 | *** join/#asterisk Bartockbatz (~szilverth@c-24-62-161-95.hsd1.nh.comcast.net) |
| 16:32.04 | Bartockbatz | hello folks - got a question about caller id |
| 16:32.50 | Bartockbatz | SIP trunk provider and would like to know what I would need to add to my dialplan and where to show caller ID of the incoming number. I am using asterisk 1.4 |
| 16:35.27 | Bartockbatz | any takers? |
| 16:36.54 | *** join/#asterisk MiserySoft (~lee@host81-139-167-173.in-addr.btopenworld.com) |
| 16:37.18 | *** join/#asterisk traderz (~traderz@c-67-184-227-156.hsd1.il.comcast.net) |
| 16:37.50 | traderz | i have two sip providers and can make calls outbound without issue but can't get any inbound calls to work. any help would be appreciated |
| 16:42.24 | *** join/#asterisk TimeRider (steve@5ac3184a.bb.sky.com) |
| 16:43.20 | [TK]D-Fender | Bartockbatz: To show it where? |
| 16:44.31 | *** join/#asterisk pabelanger_ (~pabelange@CPE0013f7abc09a-CM0013f7abc096.cpe.net.cable.rogers.com) |
| 16:48.54 | *** join/#asterisk Cain` (~Geek@unaffiliated/cain) |
| 16:54.58 | *** join/#asterisk RypPn (~TuMbL@rosscom.co.uk) |
| 16:58.21 | *** join/#asterisk bminish (~bminish@pdpc/supporter/professional/bminish) |
| 17:02.15 | *** join/#asterisk jameswf (~james@unaffiliated/jameswf-home) |
| 17:09.18 | *** join/#asterisk smooth_penguin (~smoove@59.95.36.129) |
| 17:14.44 | *** join/#asterisk riddlebox (~riddlebox@75-132-225-75.dhcp.stls.mo.charter.com) |
| 17:22.23 | *** join/#asterisk seanjohn (~shanebrig@mail.sheltoncomputers.com) |
| 17:22.47 | seanjohn | how do you say LIKE in a comparion, not explicit? |
| 17:23.11 | seanjohn | = should be like and == should be explicit but asterisk is a$$ backwards. |
| 17:23.24 | *** part/#asterisk slashtom (~tom@k-rad.co.uk) |
| 17:41.28 | *** join/#asterisk Dovid (~annon@213.8.121.90) |
| 17:42.09 | *** join/#asterisk TimeRider (~steve@109.224.131.68) |
| 17:51.07 | *** join/#asterisk diegomad (mad@186.81.144.96) |
| 17:53.46 | *** join/#asterisk Cain (~Geek@unaffiliated/cain) |
| 18:02.05 | *** join/#asterisk [TK]D-Fender (~chatzilla@64.235.218.194) |
| 18:05.36 | *** join/#asterisk romb (~romb@unaffiliated/romb-work/x-7222485) |
| 18:08.35 | *** join/#asterisk Netgeeks (~chris@173.11.68.155) |
| 18:10.56 | *** join/#asterisk ManxPower (~manxpower@216.186.151.147) |
| 18:14.37 | *** join/#asterisk xpot-mobile (~james@70-91-210-237-BusName-Utah.hfc.comcastbusiness.net) |
| 18:16.01 | *** join/#asterisk ChrisWi (~admin@mx2.wwserver.net) |
| 18:21.43 | *** join/#asterisk devdvd (~myemail@173-31-160-214.client.mchsi.com) |
| 18:27.45 | *** join/#asterisk kartik (~koolkarti@117.207.80.100) |
| 18:36.58 | *** join/#asterisk zerohalo (~zerohalo@cambridge.zerohalo.com) |
| 18:43.41 | Slugs_ | My commador 64 won't compile asterisk NEED HELP!!!! |
| 18:45.00 | ChannelZ | Upgrade to Commodore 128, it work good |
| 18:45.29 | ChannelZ | voicemail play at almost half speed! |
| 18:46.37 | Slugs_ | oh sweet!!!!!!! |
| 18:46.40 | Slugs_ | ty ty ty |
| 18:47.04 | Slugs_ | im bored ;/ |
| 18:49.03 | ChannelZ | hehe |
| 18:52.28 | *** join/#asterisk tzafrir (~tzafrir@bzq-218-155-148.cablep.bezeqint.net) |
| 18:59.16 | *** join/#asterisk romb (~romb@unaffiliated/romb-work/x-7222485) |
| 19:01.11 | *** join/#asterisk Naikrovek (~jjohnson@unaffiliated/naikrovek) |
| 19:01.11 | *** join/#asterisk zzlane (~zzlane@c-67-175-46-8.hsd1.il.comcast.net) |
| 19:01.17 | *** join/#asterisk Dolfe (~root@ool-4573cc55.dyn.optonline.net) |
| 19:05.00 | ChannelZ | vid-e-o games |
| 19:21.43 | Slugs_ | i like them |
| 19:21.59 | ChannelZ | play some |
| 19:22.11 | Slugs_ | i don't have any good ones |
| 19:22.26 | *** join/#asterisk aeperezt (~aperez@190.5.250.30) |
| 19:22.29 | Slugs_ | im thinking about turning my ps3 into a media server |
| 19:22.38 | aeperezt | helo |
| 19:22.46 | ChannelZ | as opposed to a media consumer? |
| 19:22.52 | Slugs_ | http://code.google.com/p/ps3mediaserver/wiki/FAQ |
| 19:22.54 | Slugs_ | heheh |
| 19:23.07 | Slugs_ | hello aeperezt |
| 19:23.12 | Naikrovek | Slugs_: you don't "turn it" into one, you just use it as one |
| 19:23.16 | aeperezt | need help with an dahdi wcte12xp |
| 19:23.19 | Naikrovek | and i can vouch for ps3 media server |
| 19:23.22 | Naikrovek | AWESOME |
| 19:23.28 | Slugs_ | sweet |
| 19:23.28 | ChannelZ | Yeh I use that program.. but the PS3 is the 'consumer' |
| 19:23.54 | ChannelZ | Run it on my Windoze box so I can watch shows I download on the PS3 without having to sneakernet it :) |
| 19:24.00 | Naikrovek | yes |
| 19:24.19 | Naikrovek | i have an appletv but it sucks in comparison to the ps3's media center capabilities |
| 19:24.30 | Slugs_ | oh rly? |
| 19:24.35 | Naikrovek | rly |
| 19:24.39 | Slugs_ | i heard apptv was good |
| 19:24.55 | aeperezt | it was working now it does not sincronice and every time it try to load modules and syncronize it hang the server |
| 19:24.59 | ChannelZ | it's not HD is it? |
| 19:25.02 | Naikrovek | ps3 + ps3 media server > appletv |
| 19:25.05 | Naikrovek | appletv is 720p |
| 19:25.09 | Naikrovek | ps3 is 1080p |
| 19:25.15 | aeperezt | helo Slugs_ |
| 19:25.18 | Slugs_ | ni |
| 19:25.55 | fenrus | appletv is retarded :) |
| 19:25.58 | fenrus | mac mini <3 |
| 19:26.00 | ChannelZ | grrph. |
| 19:26.06 | ChannelZ | throws an 8gb flash drive in the trash |
| 19:27.31 | ChannelZ | Have you played any of these PixelJunk games/ |
| 19:27.51 | Slugs_ | gets it out and....... throws it away again |
| 19:28.25 | TJNII | What was wrong with it? |
| 19:28.47 | ChannelZ | it's not right in the head |
| 19:28.49 | *** join/#asterisk riddlebox (~riddlebox@75-132-225-75.dhcp.stls.mo.charter.com) |
| 19:28.56 | ChannelZ | Won't format, gives errors |
| 19:29.28 | ChannelZ | I even tried dd-ing zeros to it and it barfs |
| 19:29.47 | *** join/#asterisk uqlev (~yuriy@91.184.221.31) |
| 19:29.50 | Slugs_ | haven't played these games |
| 19:29.51 | Naikrovek | wow |
| 19:31.08 | ChannelZ | I've been playing a lot of Little Big Planet lately |
| 19:32.07 | Naikrovek | that's a good game |
| 19:32.11 | *** join/#asterisk Torrieri (~Torrieri@nelug/crew/torrieri) |
| 19:39.49 | seanjohn | how is = interpreted in asterisk, literally or like and how do I get LIKE if its not so. |
| 19:40.16 | *** join/#asterisk leifmadsen (~Leif@asterisk/documenteur-extraordinaire/blitzrage) |
| 19:40.16 | *** mode/#asterisk [+o leifmadsen] by ChanServ |
| 19:40.17 | *** join/#asterisk farkus_ (chatzilla@cpe-72-225-212-219.nyc.res.rr.com) |
| 19:40.23 | seanjohn | equals |
| 19:40.40 | seanjohn | exten => s,n,GotoIf($["${CALLERID(num)}"="0000"]?blacklisted) |
| 19:42.38 | seanjohn | ? |
| 19:42.43 | wonderworld | hey. incoming calls via my sip provider stopped working suddenly. i can't see anything in the cli when i get an incoming call. outgoing calls work fine. i didn't change configs at all. how would i debug that? |
| 19:43.07 | seanjohn | does that mean if it includes or does it mean is it exactly? |
| 19:43.19 | *** join/#asterisk tzafrir (~tzafrir@bzq-218-155-145.cablep.bezeqint.net) |
| 19:43.33 | *** join/#asterisk pabelanger_ (~pabelange@CPE0013f7abc09a-CM0013f7abc096.cpe.net.cable.rogers.com) |
| 19:43.34 | seanjohn | wonderworld, sip show peers and then sip show registration |
| 19:43.55 | seanjohn | sip show registry |
| 19:44.20 | seanjohn | do you see ok next to the ips of your provider? |
| 19:44.26 | seanjohn | OK |
| 19:44.35 | wonderworld | yes |
| 19:44.53 | seanjohn | for the regisry, do you see registered if you aren't using a static ip |
| 19:45.12 | seanjohn | sip show registry |
| 19:45.15 | wonderworld | sipgate.de:5060 N xxxxxxxe0 105 Registered Sat, 01 May 2010 21:43:59 |
| 19:45.31 | ChannelZ | seanbright: = is EQUALS |
| 19:45.36 | seanjohn | are you using freepbx? |
| 19:45.47 | wonderworld | voice announcement from my provider is "number not reachable" |
| 19:45.48 | ChannelZ | I meant seanjohn |
| 19:45.54 | wonderworld | no, asterisk 1.6 |
| 19:46.28 | seanjohn | do you use iptables as your firewall |
| 19:46.46 | wonderworld | yes i do, but i didn't change my setup for over a year |
| 19:46.50 | seanjohn | ChannelZ: how do I get "LIKE" |
| 19:47.03 | wonderworld | wait, ill disable iptables to see if that fixes it |
| 19:47.16 | ChannelZ | seanjohn: Look at the : operator which is a regex |
| 19:47.57 | seanjohn | try iptables -A INPUT -s PROVIDERIPHERE -p udp --dport 10000:20000 -j ACCEPT |
| 19:48.15 | seanjohn | then iptables -A INPUT -s PROVIDERIPHERE -p udp --dport 5060:5064 -j ACCEPT |
| 19:48.57 | TJNII | Try turning off the firewall first. If that fixes it, then you can mess with rules. |
| 19:48.57 | seanjohn | just a suggestion, allowing all voip |
| 19:48.57 | wonderworld | ya |
| 19:48.57 | seanjohn | but only from his provider |
| 19:48.57 | wonderworld | wow on debian there is no /etc/init.d/iptables |
| 19:49.10 | wonderworld | is there an easy way to disable it or do i have to write rules that allow everything? |
| 19:49.18 | seanjohn | did you compile it, if so, i could help but go to #netfilter |
| 19:49.34 | seanjohn | but try disabling the firewall first |
| 19:50.00 | ChannelZ | iptables -F; iptables -P INPUT ACCEPT |
| 19:50.16 | seanjohn | he can't find the binary ChannelZ lo |
| 19:50.18 | seanjohn | lol |
| 19:50.31 | wonderworld | thanks, i'll try now |
| 19:50.35 | ChannelZ | /sbin/iptables |
| 19:50.37 | *** join/#asterisk romb (~romb@unaffiliated/romb-work/x-7222485) |
| 19:50.54 | [TK]D-Fender | seanjohn: there is no "like". So compare a substring |
| 19:51.07 | seanjohn | i saw that, using regex |
| 19:51.11 | seanjohn | thanks fender |
| 19:51.35 | ChannelZ | well he was talking about using a substring function to cut what you're comparing, and then compare it with = |
| 19:51.57 | seanjohn | so, actual substring() |
| 19:52.05 | wonderworld | i am not sure for how long this isn't working, because i recieve near zero calls on that line. maybe it's down for weeks |
| 19:52.46 | wonderworld | cell phone battery empty. too many problems in a row :) |
| 19:53.00 | TJNII | Your provider should tell you that. Broadvoice gives me a listing of missed calls. |
| 19:53.47 | wonderworld | ok. firewall is down. same result. |
| 19:53.56 | seanjohn | can you point me on voipinfo, fender? |
| 19:54.22 | ChannelZ | So either you are lying to your ITSP and they're sending calls to a crazy IP that isn't you, or they are maybe broken. |
| 19:54.38 | wonderworld | wait i can check that. |
| 19:54.47 | wonderworld | they show the ips i am registered with |
| 19:55.24 | *** join/#asterisk riddlebox (~riddlebox@75-132-225-75.dhcp.stls.mo.charter.com) |
| 19:55.37 | seanjohn | nevermind, fender, offset and length, i did that the other day with caller id |
| 19:55.44 | wonderworld | nope. ip is correct |
| 19:56.14 | wonderworld | i restarted asterisk as well, no change. can't reboot the box right now. |
| 19:56.15 | [TK]D-Fender | seanjohn: Which is what I was saying |
| 19:56.21 | ChannelZ | so if you're really getting nothing on the console at ALL when a call is supposed to be coming in, then perhaps they aren't sending it to you.. for reasons unknown |
| 19:56.39 | seanjohn | a lot more dialplan that regexp |
| 19:56.55 | [TK]D-Fender | seanNope |
| 19:57.00 | wonderworld | ok. thank you guys. i don't want to call them, will be support-horror i guess |
| 19:57.01 | [TK]D-Fender | seanjohn: Nope |
| 19:57.07 | [TK]D-Fender | seanjohn: same single line |
| 19:57.46 | seanjohn | to separate the digits into variables, its 10 extens and then to compare for patterns, about 5 per comparison, with 8 comparisons = 55 extens |
| 19:58.32 | ChannelZ | we have no idea what you're doing |
| 19:58.33 | [TK]D-Fender | seanjohn: depends what you are comparing. Give me a precise pair to compare please |
| 19:59.16 | wonderworld | another strange thing is...one sip account with the same provider is registered to another box. that one works fine. i guess the problem is on my side but i still don't know how to debug it :) |
| 19:59.42 | wonderworld | maybe my ISP blocked sip |
| 19:59.57 | ChannelZ | mebbe |
| 20:00.34 | seanjohn | if it includes more than so many 0's and so many of each digit, such as 5 repetitive. |
| 20:00.42 | seanjohn | callerid check |
| 20:00.44 | *** join/#asterisk smooth_penguin (~smoove@59.95.36.129) |
| 20:00.55 | wonderworld | just 5060 would be important for seeing something in asterisk, right? |
| 20:01.05 | ChannelZ | for incoming sip yes |
| 20:01.05 | seanjohn | all go to blacklist in the same context |
| 20:01.18 | ChannelZ | unless you change the port |
| 20:01.58 | seanjohn | i already have > LEN 10 and less than LEN 10 |
| 20:02.14 | ChannelZ | seanjohn: you're probably better off writing an AGI in some other language to do crazy things.. I check CID against a database for instance to block people, or translate stupid CID names into something better |
| 20:02.40 | seanjohn | right now i have a text database |
| 20:02.43 | [TK]D-Fender | seanjohn: precise samples please. |
| 20:03.11 | seanjohn | 0000 consecutive |
| 20:03.21 | wonderworld | hmm no. moved my apache to port 5060 and tried to connect from an external host. works |
| 20:03.37 | seanjohn | thats how they INVITE you wonder |
| 20:03.57 | seanjohn | change your register string if you want another port |
| 20:04.31 | wonderworld | i'll check sip debug log again |
| 20:04.36 | wonderworld | maybe i missed something |
| 20:04.51 | ChannelZ | 5060 is TCP for your webserver, SIP is UDP |
| 20:04.59 | wonderworld | doh ohh ok |
| 20:05.03 | ChannelZ | Is your firewall still down? |
| 20:05.21 | wonderworld | no, up again. wait i can show you my active iptables |
| 20:06.14 | [TK]D-Fender | sean4 "0"'? Thats it? |
| 20:06.18 | ChannelZ | well if you add a rule specifically to allow UDP 5060 (which I assume you already have), you can look at the packet counter and if it's staying at 0 that would tell you somethign |
| 20:06.22 | [TK]D-Fender | seanjohn: 4 "0"'? Thats it? |
| 20:06.33 | *** join/#asterisk Infin1ty (~Infin1ty@pdpc/supporter/active/infin1ty) |
| 20:06.52 | wonderworld | http://pastebin.com/Aq0QGqLa |
| 20:06.52 | [TK]D-Fender | seanjohn: So anything starting with 4 "0"? |
| 20:06.59 | ChannelZ | [TK]D-Fender: I think he means 4 "0" anywhere in the number. Thus regex. |
| 20:08.06 | seanjohn | yeah or contain it anywhere, we all know area codes don't contain 3 zeros and neither does prefixes or 4 zeros for extensions |
| 20:08.31 | seanjohn | i could do the substring for each |
| 20:08.32 | seanjohn | doh |
| 20:08.41 | seanjohn | 3 lines instead of 10 |
| 20:08.53 | [TK]D-Fender | seanjohn: of it its any series of 4 consecutive idetical digits at any offset this will clearly take more |
| 20:09.15 | [TK]D-Fender | seanjohn: On the thought of it occuring anywhere in the string |
| 20:09.16 | zzlane | Does anyone on here have experience with Askozia? http://www.askozia.com/ |
| 20:09.47 | wonderworld | ChannelZ: i'll try the package counter, how would i show it for a specific port? |
| 20:10.04 | seanjohn | i was doing xten => change,n,Set(DIGIT1=${CIDN:0:-9}) |
| 20:10.04 | seanjohn | exten => change,n,Set(DIGIT2=${CIDN:1:-8}) |
| 20:10.04 | seanjohn | exten => change,n,Set(DIGIT3=${CIDN:2:-7}) |
| 20:10.06 | seanjohn | and so on |
| 20:10.09 | wonderworld | sorry, i am an IP-Tables idiot. |
| 20:10.49 | ChannelZ | well.. do iptables -L INPUT and pastebin that, lets see what you have going first |
| 20:11.09 | wonderworld | i already did [22:06] <wonderworld> http://pastebin.com/Aq0QGqLa |
| 20:11.24 | ChannelZ | sorry I missed it |
| 20:11.29 | wonderworld | np |
| 20:11.30 | seanjohn | but for this, just have 3 lines and change the offsets for acode, prefix, extens |
| 20:11.53 | seanjohn | extens to keep from conflicting with exten of dial |
| 20:12.08 | seanjohn | thanks for suggestion fender |
| 20:12.17 | p3nguin | wonderworld: I just got here... is your box behind a firewall and NATted or are you connecting it directly to the internet? |
| 20:12.29 | ChannelZ | wonderworld: ok.. so so iptables -Z INPUT |
| 20:12.56 | wonderworld | cablemodem <---- public ip ----> [BOX] <--LAN> |
| 20:12.57 | ChannelZ | that will zero the packet counters. Then try an incoming call. |
| 20:13.12 | ChannelZ | Then do iptables -L INPUT -v |
| 20:13.36 | wonderworld | k, trying.... |
| 20:14.25 | ChannelZ | if the first column remains 0 for your udp sip line (line 9 in your paste) then no SIP packets are even reaching you. If you /msg me your IP I can even try |
| 20:14.38 | wonderworld | lol |
| 20:14.43 | wonderworld | it suddenly started working |
| 20:14.57 | ChannelZ | hmm |
| 20:15.13 | wonderworld | must have been iptables then somehow |
| 20:15.21 | wonderworld | or my sip-provider (don't think so) |
| 20:15.32 | ChannelZ | It could be a lot of things |
| 20:17.11 | *** join/#asterisk joako_ (~joako@opensuse/member/joak0) |
| 20:18.54 | joako_ | I am getting odd error messages: "asterisk.c: The canary is no more. He has ceased to be! He's expired and gone to meet his maker! He's a stiff! Bereft of life, he rests in peace. His metabolic processes are now history!" |
| 20:20.11 | TJNII | haha. I have no idea what that is supposed to mean. |
| 20:20.13 | ChannelZ | Run for your life! |
| 20:20.23 | TJNII | has nethack mode enabled in screen, too. |
| 20:21.49 | wonderworld | ChannelZ: thanks a lot for your help. appreciate it! |
| 20:22.42 | ChannelZ | for what it was worth :) |
| 20:24.03 | ChannelZ | joako_: are you running * at realtime priority? |
| 20:25.53 | *** join/#asterisk tzafrir (~tzafrir@bzq-218-155-146.cablep.bezeqint.net) |
| 20:29.12 | wonderworld | flush |
| 20:30.35 | seanjohn | anyone know of a site to search through all area codes for existence of a prefix |
| 20:32.25 | riddlebox | alright got fail2ban working now thats one less thing I have to worry about all the time |
| 20:32.38 | wonderworld | fail2ban is great |
| 20:33.19 | wonderworld | do you use it for ssh or for other services as well? |
| 20:33.50 | riddlebox | ssh isnt allowed from the outside world, only inside |
| 20:33.57 | ChannelZ | I changed my ssh port which pretty much stopped things dead |
| 20:34.02 | riddlebox | and my wife wouldnt know how to do ssh if she had to lol |
| 20:34.07 | ChannelZ | (I was/am running denyhosts) |
| 20:34.39 | wonderworld | denyhosts is the same but if i remember right it does only ssh? |
| 20:34.57 | ChannelZ | by default yes but you can teach it to do other things.. but I don't think it's as flexible as fail2ban |
| 20:35.05 | wonderworld | ahh i see |
| 20:35.19 | riddlebox | plus I only allow one extension to be accessed from the outside world, the others all expect certain IP addresses |
| 20:35.21 | wonderworld | there come many premade scripts with fail2ban for a lot of services |
| 20:35.30 | wonderworld | smtp is useful |
| 20:35.54 | riddlebox | wonderworld, what do I set in fail2ban to have it email me when it bans someone? |
| 20:36.29 | wonderworld | not sure. i have it running on a box i can't access right now. i think there was an otion in the main config file |
| 20:36.49 | *** join/#asterisk MiserySoft (~lee@95.145.211.181) |
| 20:36.50 | riddlebox | hrmm I will keep reading through it all then |
| 20:36.51 | wonderworld | mine mails to root which is forwarded afterwards |
| 20:37.03 | *** part/#asterisk MiserySoft (~lee@95.145.211.181) |
| 20:39.30 | *** join/#asterisk MiserySoft (~lee@95.145.211.181) |
| 20:39.34 | *** part/#asterisk MiserySoft (~lee@95.145.211.181) |
| 20:39.36 | wonderworld | has someone here experience with patton media gateways? i heared only the best about them and was wondering if the gossip is true? |
| 20:42.22 | xheliox | wonderworld: I haven't used them in a couple of years, but they worked every well for us at a hotel we installed them in. |
| 20:42.47 | dzup | hmm degium tormenta 3 is a good compatible choice for a rented e1 line with my asterisk box or there is a better choice? |
| 20:42.47 | wonderworld | i really want to move from pci hardware |
| 20:42.55 | wonderworld | generated a lot of problems for me |
| 20:43.53 | wonderworld | i didn't have a single problem with digium T1/E1 cards but a lot of problems with DIGIUM (and others) for Euro-ISDN |
| 20:44.17 | *** join/#asterisk romb (~romb@unaffiliated/romb-work/x-7222485) |
| 20:44.44 | dzup | am planning in usa server over a e1 |
| 20:46.40 | wonderworld | i have been running a TE122 Wildcard on a german E1 without problems |
| 20:46.49 | wonderworld | for about 2 years |
| 20:47.02 | wonderworld | 30 people using softphones all day |
| 20:47.16 | *** join/#asterisk Brookss (~SSJGotenk@174.3.119.13) |
| 20:47.51 | wonderworld | echo cancelation module is important |
| 20:48.04 | wonderworld | software echo cancel sucks |
| 20:48.43 | *** join/#asterisk tzafrir (~tzafrir@bzq-218-155-145.cablep.bezeqint.net) |
| 20:49.06 | dzup | have you try a'tormenta 3' ? |
| 20:49.13 | wonderworld | nope |
| 20:50.14 | dzup | hmm i going to google on 'TE122 Wildcard' |
| 20:50.34 | wonderworld | it's from digium as well |
| 20:50.40 | *** join/#asterisk MiserySoft (~LND@95.145.211.181) |
| 20:50.58 | dzup | ahh |
| 20:51.32 | *** join/#asterisk lost_sou1 (~none@cpe-67-241-68-202.twcny.res.rr.com) |
| 20:56.26 | wonderworld | is there a debian repository with current asterisk packages? |
| 20:57.12 | Brookss | I think its in Squeeze |
| 20:57.24 | Brookss | didn't get the most current one with Sid/Lenny |
| 20:57.57 | wonderworld | yeah, no i ment if there is a community-supported external repository that provides current versions.... |
| 21:00.49 | [TK]D-Fender | dzup: Tormenta is ANCIENT. Get a current model |
| 21:01.49 | dzup | [TK]D-Fender: can you refer me a model to be use on e1? |
| 21:02.41 | [TK]D-Fender | dzup: And of Digium or Sangoma's current digital cards |
| 21:03.32 | dzup | either, must be * compatible in usa/cana |
| 21:03.48 | dzup | s/cana/canada/g |
| 21:06.00 | [TK]D-Fender | dzup: Any |
| 21:06.52 | dzup | ok i got it *any* but no tormenta, something new |
| 21:08.21 | Brookss | what to u guys think about 3cx? |
| 21:08.45 | ChannelZ | the iphone clone softphone? |
| 21:08.54 | Brookss | the windows pbx |
| 21:08.57 | [TK]D-Fender | Brookss: Why would anyone in here have used it? |
| 21:10.00 | Brookss | [TK]D-Fender: I try as many ok products as I can, and so assume others may also... such as Ubuntu/Suse/Fedora/CentOS or same with asterisk kinda XD |
| 21:10.36 | *** join/#asterisk riddlebox (~riddlebox@75-132-225-75.dhcp.stls.mo.charter.com) |
| 21:10.41 | [TK]D-Fender | Brookss: Yes, but you've just done the equivalent for looking for positive reviews for a Big Mac... while sitting in a BURGER KING |
| 21:11.02 | Brookss | lol! XD ok I see your point |
| 21:11.27 | [TK]D-Fender | Brookss: If you're looking for a fully comprehensive can of worms to open, ask about FreeSWITCH while you're at it :) |
| 21:12.30 | Brookss | lol I take it people still prefer asterisk over freeswitch until freepbx v3.0 comes out? ^_^ |
| 21:13.06 | [TK]D-Fender | Brookss: And why would that be? |
| 21:13.19 | [TK]D-Fender | Brookss: this isn't FreePBX either.... |
| 21:13.30 | [TK]D-Fender | Brookss: Seems you've found ANOTHER can... |
| 21:13.49 | [TK]D-Fender | Brookss: And FreePBX 3.0 IS due to support * |
| 21:13.52 | Brookss | lots of options and time consuming miracles to test on yep |
| 21:15.50 | Brookss | thats only the cans however, the briefcase to me ends up being which distro to run it all over >_< |
| 21:18.48 | *** join/#asterisk tzafrir (~tzafrir@bzq-218-155-147.cablep.bezeqint.net) |
| 21:19.03 | Corydon76-dig | Someone learned far too late that once people get used to it, they absolutely loathe XML |
| 21:19.25 | [TK]D-Fender | Brookss: Clearly 3cx on VAX is for you |
| 21:20.50 | Brookss | I just looked it up, its an OS :o |
| 21:21.09 | *** join/#asterisk gr0mit (~tim@extrt.txrx.org.uk) |
| 21:21.34 | [TK]D-Fender | Brookss: Don't forget to stock up on Bt-101's |
| 21:22.13 | *** join/#asterisk ehsjoar (~ehsjoar@c-98-245-155-132.hsd1.co.comcast.net) |
| 21:22.23 | Brookss | ewwww XD |
| 21:24.21 | Corydon76-dig | Their initial firmware for the bt101 wasn't bad... as long as you didn't upgrade it the most current |
| 21:24.59 | Corydon76-dig | From bad to worse, and you couldn't downgrade |
| 21:27.03 | *** join/#asterisk rare1980_ (~rare1980@115.186.3.19) |
| 21:28.33 | joako_ | I think we can all agree that * (including string and tin cans) > grandstream |
| 21:33.19 | Dovid | lol |
| 21:33.39 | Dovid | i have a gxp200 that sits on my desk and collects dust |
| 21:38.30 | Slugs_ | i did the same thing with my penis |
| 21:38.58 | *** join/#asterisk romb (~romb@unaffiliated/romb-work/x-7222485) |
| 21:47.52 | *** join/#asterisk chilicuil (~chilicuil@unaffiliated/chilicuil) |
| 21:57.46 | *** join/#asterisk uqlev (~yuriy@91.184.221.31) |
| 22:07.26 | *** join/#asterisk enyawix (~enyawix@adsl-87-97-208.bna.bellsouth.net) |
| 22:12.45 | *** join/#asterisk vivekp (~b49531e1@gateway/web/freenode/x-xsissyejgzcztocd) |
| 22:18.00 | *** join/#asterisk MhaddogM1 (~MhaddogM1@adsl-64-223-140.mia.bellsouth.net) |
| 22:24.17 | *** join/#asterisk Slugs_ (~yeah@c-76-97-217-69.hsd1.ga.comcast.net) |
| 22:25.05 | *** join/#asterisk TimeRider (steve@5ac3184a.bb.sky.com) |
| 22:33.18 | *** join/#asterisk romb (~romb@unaffiliated/romb-work/x-7222485) |
| 22:40.26 | *** join/#asterisk chilicuil (~chilicuil@unaffiliated/chilicuil) |
| 22:41.50 | *** join/#asterisk TimeRider (steve@5ac3184a.bb.sky.com) |
| 23:02.59 | *** join/#asterisk jksM (jks@193.189.93.254) |
| 23:04.34 | *** join/#asterisk putnopvut (~putnopvut@asterisk/master-of-queues/mmichelson) |
| 23:04.34 | *** mode/#asterisk [+o putnopvut] by ChanServ |
| 23:06.04 | *** join/#asterisk jks (jks@193.189.93.254) |
| 23:08.42 | p3nguin | In order for jabber support to work with tls, should I have to explicitly compile asterisk --with-iksemel and --with-gnutls? |
| 23:15.48 | *** join/#asterisk baddragon (yiffstar66@unaffiliated/devemo) |
| 23:19.09 | seanjohn | is this correct: exten => s,n,GotoIf($[${acode}>=257 && ${acode}<=300]?blacklisted) |
| 23:19.41 | seanjohn | the area code should be no greater than 256 and no more than 300, for this check |
| 23:19.52 | seanjohn | the area code should be no greater than 256 and no less than 300, for this check |
| 23:21.59 | jaytee | >=257 will only match on 257 or higher so 256 would never work |
| 23:22.02 | *** join/#asterisk blaines (~blaines@ip68-106-24-21.ph.ph.cox.net) |
| 23:22.09 | p3nguin | I guess not, because I compiled it with those options, and I still get this: [May 1 18:21:39] ERROR[18116]: res_jabber.c:515 aji_act_hook: gnuTLS not installed. You need to recompile the Iksemel library with gnuTLS support |
| 23:22.11 | seanjohn | i know that jaytee |
| 23:22.21 | seanjohn | i'm trying to figure out how to say AND |
| 23:22.25 | seanjohn | && |
| 23:22.44 | seanjohn | exten => s,n,GotoIf($[${acode}>=257 && ${acode}<=300]?blacklisted) |
| 23:24.18 | jaytee | you only need one & when evaluating 2 expressions |
| 23:24.42 | jaytee | at least in the asterisk dialplan anyways |
| 23:25.00 | *** join/#asterisk romb (~romb@unaffiliated/romb-work/x-7222485) |
| 23:25.18 | jaytee | maybe you're thinking you need to from habit? C, C++ or C# coding? |
| 23:29.28 | *** join/#asterisk tzafrir (~tzafrir@bzq-218-155-145.cablep.bezeqint.net) |
| 23:33.28 | *** join/#asterisk voxter (~voxter@S010600090f53ea17.vc.shawcable.net) |
| 23:34.16 | *** join/#asterisk kotp (~vgoff@96.2.187.66) |
| 23:37.19 | *** join/#asterisk chilicuil (~chilicuil@unaffiliated/chilicuil) |
| 23:42.03 | *** join/#asterisk tzafrir_laptop (~tzafrir@212.179.75.202) |
| 23:44.54 | carrar | seanjohn, that seems like a odd range of area codes to block |
| 23:46.41 | carrar | General Purpose Code Area codes |
| 23:48.59 | joobie | guys i got a polycom 321 and having an auth issue.. only have access to the web config, but ive setup other polycom 320's this way also and it's been ok.. have confirmed against another polycom 320 that this 321 is setup right - but i keep getting .. "[Apr 30 22:50:45] WARNING[5184]: chan_sip.c:8553 check_auth: username mismatch, have <3006>, digest has <>" |
| 23:49.01 | joobie | 3016 is the sip user id .. any idea wats up with the conf? couldnt see anything about digest in there.. and it looks identical to a 320 which auths fine |
| 23:55.49 | *** join/#asterisk pabelanger_ (~pabelange@CPE0013f7abc09a-CM0013f7abc096.cpe.net.cable.rogers.com) |