| 00:00.15 | AlcornTech | citywok: Could be demonic posession. |
| 00:02.15 | p3nguin | Could be related to possession of controlled substances, too. :D |
| 00:04.13 | *** join/#asterisk Mhaddog__ (~Mhaddog@z65-50-116-17.ips.direcpath.com) |
| 00:10.42 | *** join/#asterisk www2 (~jean-paul@5351F404.cm-6-2d.dynamic.ziggo.nl) |
| 00:10.50 | www2 | hi all |
| 00:13.41 | AlcornTech | tyman: app_swift > app_cepstral, granted, depending on what features you're using, you may need to bust out your C skills to fix problems with unallocated variables returning garbage to the dialplan, and mishandling of the pound key in some circumstances. |
| 00:14.17 | *** join/#asterisk coppice (~chatzilla@190.131.92.116.dyn.pacific.net.hk) |
| 00:17.28 | *** join/#asterisk rrb3942 (~rbullock@cpe-67-242-215-62.rochester.res.rr.com) |
| 00:19.30 | tyman | AlcornTech: you may be right. But this is happening BEFORE all modules but "core" have loaded after restart |
| 00:20.08 | ClintGoudie-Nice | Heya guys, I've got an asterisk 1.8.2.2 installed from RPM. I'm trying to debug a problem in chan_sip, so I've pulled down the src rpm, and modified the source. The source will make, but when I copy chan_sip.so into /usr/lib/asterisk/modules asterisk informs me on start that it's been compiled with different compile-time options and wont load it. |
| 00:20.19 | tyman | AlcornTech: how could dialplan parsing happen before the modules that parse it are loaded? |
| 00:20.39 | ClintGoudie-Nice | I thought to just remake the RPM, but it gets cranky with some missing items at the end of the build, and I really only care about chan_sip |
| 00:21.33 | ClintGoudie-Nice | I dont want to just make install and slam what I've got over the top of the rpm... who knows what might happen :S |
| 00:21.39 | p3nguin | What "problem" are you facing in chan_sip? |
| 00:21.52 | AlcornTech | tyman: I was merely suggesting that perhaps the problem could be worked around by using app_swift instead of app_cepstral... perhaps these "modules" wouldnt need to load. Aside from that, I have no other ideas. |
| 00:22.20 | ClintGoudie-Nice | I'm trying to send an unsolicited sip notify for MWI. the code is in there to handle it, but all I get back is a 489 Bad event |
| 00:22.39 | ClintGoudie-Nice | I expect I've got something configured incorrectly, but I'm not sure what it would be. |
| 00:22.45 | p3nguin | Is it supposed to work? Is it a bug that it doesn't work for you? |
| 00:22.58 | ClintGoudie-Nice | it is |
| 00:23.05 | ClintGoudie-Nice | it is supposed to work. |
| 00:23.22 | p3nguin | If it is a bug, see if it has been addressed in the most recent version. If it has, upgrade using the official rpm. |
| 00:23.43 | www2 | i heft some problems with music onhold http://pastebin.com/rn7bGwT5 |
| 00:23.53 | ClintGoudie-Nice | There was a bug report that's been accepted as fixed in 2.8 |
| 00:23.54 | p3nguin | Wait, I've assumed qwell created an rpm of the most recent version. |
| 00:24.03 | p3nguin | There's no Asterisk 2.8. |
| 00:24.04 | www2 | and live streams form internet |
| 00:24.17 | ClintGoudie-Nice | sorry, 1.8 ;) |
| 00:24.37 | tyman | AlcornTech: I appreciate your suggestions and hope that didn't come across in any way disrespectful. I'm currently only using SayText in the dialplan. Very simple with the same config which worked on my other centos5.5 box with 1.8.2.2. This box has 1.8.2.3 and and aliased net device (the only diffs) |
| 00:25.02 | tyman | literally same config.. |
| 00:25.11 | ClintGoudie-Nice | the bug is here: https://issues.asterisk.org/view.php?id=13028 |
| 00:25.50 | ClintGoudie-Nice | the code in 1.8 is somewhat different but still appears to be in handle_request_notify |
| 00:26.06 | AlcornTech | www2: Download the MOH files in GSM format, and plop them into /var/lib/asterisk/moh/ or whatever the correct directory is. |
| 00:26.36 | AlcornTech | http://downloads.asterisk.org/pub/telephony/sounds/ |
| 00:26.43 | ClintGoudie-Nice | what I'm trying to uncover is why it ends in 489 Bad event. Unfortunately there's not enough tracing in the else if... message-summary... block for me to tell |
| 00:26.51 | www2 | this is a mp3livestream |
| 00:28.19 | www2 | edit i use a mp3 live stream |
| 00:30.26 | AlcornTech | www2: never used it. Looks like a transcoding problem coverting mp3 to ulaw... "unable to spawn mp3player"... is that a program and is it installed properly? If all else fails, download the source code and look at line 626 of res_musiconhold.c :) |
| 00:32.52 | www2 | no i use mpg123: /usr/bin/mpg123 -q -r 8000 -f 8192 -s .mono http://88.191.123.8:8000 |
| 00:34.29 | www2 | @AlcornTech |
| 00:36.58 | tyman | I thought i heard/read something a while back about meetme not needing clocking Hw any longer in 1.8. Is it correct that by just compiling DAHDI w/o hardware u can fully utilize MeetMe? Confbridge is nice but not full featured enough. |
| 00:37.30 | leifmadsen | tyman: compiling Asterisk + DAHDI has always allowed MeetMe() to work without hardware |
| 00:37.33 | tyman | s/enough./enough for my needs right now./ |
| 00:37.55 | tyman | leifmadsen: oh :-) thx |
| 01:05.43 | *** part/#asterisk ruben23 (~RLACUMBA@121.97.111.142) |
| 01:06.49 | *** join/#asterisk sourcode (~code@ppp-58-8-98-192.revip2.asianet.co.th) |
| 01:10.05 | pabelanger | leifmadsen: Have you done any database transactions with Asterisk 1.6.2+ ? |
| 01:10.06 | pabelanger | https://wiki.asterisk.org/wiki/display/AST/Database+Transactions |
| 01:16.29 | leifmadsen | pabelanger: not really |
| 01:17.24 | *** join/#asterisk bjhaid (~abejide@41.206.12.12.vgccl.net) |
| 01:17.56 | leifmadsen | anyone configure dnsmasq.conf for FTP provisioning of phones? I haven't done this in over a year and forget the config options. Google seems to be mostly useless, surprisingly.... |
| 01:18.17 | p3nguin | I've only done it for tftp. |
| 01:18.30 | leifmadsen | ya I want to use ftp so I can authenticate |
| 01:20.36 | *** join/#asterisk Mhaddog (~Mhaddog@z65-50-116-17.ips.direcpath.com) |
| 01:21.24 | p3nguin | leifmadsen: http://forums.untangle.com/networking/3654-dhcp-options-option-33-tftp-how-2.html#post54201 |
| 01:21.40 | p3nguin | See if that particular post can get you heading in the right direction. |
| 01:22.00 | leifmadsen | will do thanks |
| 01:22.53 | p3nguin | It may be useless, I'm not sure. |
| 01:23.15 | leifmadsen | ya who knows |
| 01:23.29 | leifmadsen | this should be trivial to document, but no one seems to have done it |
| 01:23.31 | leifmadsen | oddly enough |
| 01:31.11 | carrar | why using dnsmasq? |
| 01:31.19 | leifmadsen | why not? |
| 01:31.31 | carrar | use ISC DHCP! |
| 01:31.33 | leifmadsen | I don't understand your question |
| 01:31.43 | leifmadsen | this client is using dnsmasq, that's the only reason why |
| 01:31.50 | carrar | well dnsmasq serves a specific function or two |
| 01:31.56 | leifmadsen | probably because that's what ClearOS uses |
| 01:32.04 | leifmadsen | doesn't matter, I can't change applications for DHCP |
| 01:32.14 | carrar | ah |
| 01:32.16 | leifmadsen | regardless as to what I should, or want, to use |
| 01:32.27 | carrar | damn customers!! :) |
| 01:35.28 | *** join/#asterisk Kumbang (~kumbang@180.245.137.5) |
| 01:39.17 | *** join/#asterisk rrb3942 (~rbullock@cpe-67-242-215-62.rochester.res.rr.com) |
| 01:41.40 | AlcornTech | carrar: I had an "interesting" customer today telling about everything from climate change, african flower propogation, how we should bring back pen and paper letters and the USPS, her dog on the treadmill, and more. Sometimes, customers can break the monotony. :) |
| 01:42.42 | carrar | mmm african flower propogation |
| 01:42.47 | carrar | now thats a fun topic |
| 01:43.53 | carrar | What is the average distance a flower can propogate in a 10 year period? |
| 01:44.25 | AlcornTech | beats me. I only know 1's and 0's. |
| 01:48.08 | *** part/#asterisk Tech_Travis (~Travis_El@cpe-76-168-191-127.socal.res.rr.com) |
| 01:52.31 | *** join/#asterisk joobie (~joobie@mx01.anric.com.au) |
| 01:57.40 | AlcornTech | after last night's PRI/T1/Digium card escapades I'm left wondering whether the "CPE" in "cpe-76-168-191-127.socal.res.rr.com" means "Customer-Premises Equipment" (or not). |
| 01:58.36 | joobie | what happened last night with your PRI/TI/Digium card escapades? |
| 02:00.51 | AlcornTech | joobie: I learned that if you have 2 servers and want to go SIP -> Asterisk -> Digium Cards -> 2nd server, you have to set DAHDI to use "pri_net" (so it provides timing and dialtone) instead of the default setting, "pri_cpe", which uses the other endpoint for timing/dialtone....took hours to get that and just DAHDI itself working. |
| 02:03.13 | joobie | ahh :) |
| 02:03.15 | joobie | good work |
| 02:06.22 | WIMPy | AlcornTech: Did you try qsig as well? |
| 02:09.58 | AlcornTech | WIMPy: No but I'll look into it. Thanks for the tip. |
| 02:16.16 | *** join/#asterisk ariel_ (~chatzilla@99-1-236-49.lightspeed.miamfl.sbcglobal.net) |
| 02:17.21 | *** join/#asterisk jaytee (~jforde051@unaffiliated/jaytee) |
| 02:28.34 | *** join/#asterisk leifmadsen (~Leif@asterisk/documenteur-extraordinaire/blitzrage) |
| 02:28.34 | *** mode/#asterisk [+o leifmadsen] by ChanServ |
| 02:36.23 | *** join/#asterisk ronr (~ron@62.177.179.146) |
| 02:37.20 | *** join/#asterisk Micc (~quassel@c-24-18-20-54.hsd1.wa.comcast.net) |
| 02:37.47 | Micc | it seems like one of my servers started using a different CDR module recently. How can I tell which one its actually using? |
| 02:40.01 | WIMPy | Nohing more than cdr show status, I think. |
| 02:40.35 | Micc | oh, so it can be using multiple then? |
| 02:40.51 | WIMPy | yes |
| 02:40.54 | Micc | it shows adaptive odbc, csv, cdr-custom, odbc, cdr_sqlite3_custom |
| 02:41.09 | Micc | I don't need all those. |
| 02:41.51 | WIMPy | Then noload them. |
| 02:43.11 | Micc | where does cdr_odbc get its fields? |
| 02:44.06 | WIMPy | cdr_odbc.conf? |
| 02:45.28 | AlcornTech | can you specify the database fields? I always thought they were hard coded. http://www.voip-info.org/wiki/view/Asterisk+cdr+mysql has the mysql field list. |
| 02:46.01 | WIMPy | I've never used a database backend, but I think you can configure them as you like. |
| 02:46.07 | leifmadsen | cdr_adaptive_odbc makes it all much easier |
| 02:46.25 | leifmadsen | it'll automatically add the fields you don't have if it is supported by the database |
| 02:46.32 | Micc | yeah, thats what it looks like, but I guess the sqlite one must have been trying to insert with extra fields. |
| 02:46.34 | leifmadsen | then you can just add and reference new columns as you like once you've created them |
| 02:46.39 | Micc | if I remove it then it should be fine. |
| 02:46.52 | AlcornTech | if you use MySQL, you can easily plug-in web based stats via http://www.cdr-stats.org/ |
| 02:46.54 | Micc | I've never seen the error i'm getting now before though. |
| 02:47.03 | *** join/#asterisk shtoom (shtoom@14.96.165.59) |
| 02:47.34 | Micc | AlcornTech, yeah I love cdr-stats but I wish it could tell me max usage per day/month instead of just per hour. |
| 02:47.53 | Micc | having to drill down and find the max line usage gets old fast. |
| 02:48.20 | Micc | oh wait, thats not the same as asterisk-stat |
| 02:48.26 | Micc | this looks nice. |
| 02:50.58 | AlcornTech | Micc: the cdr-stats is a rewrite of asterisk-stat... it's what it's evolved into. asterisk-stat is no more, from what I understand. Beware, if you're not familiar with installing python modules like a ninja, installation of cdr-stats could take half a day. |
| 02:52.05 | Micc | I use postgresql anyways, it probably wouldn't work. |
| 02:52.27 | AlcornTech | Hard to say... I'd imagine it uses T-SQL, but thats just my imagination. :) |
| 02:53.02 | AlcornTech | It's definately shiny though. |
| 02:58.36 | Micc | yes, it looks very snazy, I'll have to look into it when I have more time. |
| 02:59.47 | *** join/#asterisk csnook (~chris@c-76-19-64-161.hsd1.ma.comcast.net) |
| 03:10.00 | *** join/#asterisk jcape (~James_Cap@209.120.251.81) |
| 03:10.30 | jcape | Question with facilityenable=yes -- I get hangup cause 50 (facility not supported) when attempting to dial out |
| 03:11.01 | WIMPy | That was not a question. |
| 03:13.23 | WIMPy | But I've got one: Is it a disconnect or a status message? |
| 03:14.39 | jcape | status message, everyone busy/congested |
| 03:15.28 | WIMPy | That does not fit. A status can be ignored. The busy/congested suggests disconnect. |
| 03:15.41 | jcape | OK, then it's a disconnect :-) |
| 03:16.33 | WIMPy | Then you either must not enable facilities or you don't have the correct signalling. |
| 03:16.45 | WIMPy | But I wonder what kind of facility would be sent whe ncalling out. |
| 03:16.47 | jcape | Well, with facilityenable=no, outbound calls work. |
| 03:17.09 | jcape | I've got the intense debug results, if that would help |
| 03:17.21 | WIMPy | yes |
| 03:17.28 | jcape | pastebin, or does it matter? |
| 03:17.50 | WIMPy | pb is good |
| 03:18.22 | leifmadsen | hey for whoever has the problem of no console output no matter what they try, it's because you don't have a logger.conf! |
| 03:18.30 | leifmadsen | (or an incorrect/broken logger.conf) |
| 03:18.51 | leifmadsen | I just ran into it here after copying some files over, and forgot logger.conf, and without it, I get no SIP debug on the console or console output at all |
| 03:18.57 | WIMPy | jcape: Do you need facilities? |
| 03:18.57 | leifmadsen | problem solved |
| 03:19.39 | jcape | I'd like to send CNAM, yes |
| 03:20.02 | WIMPy | Ah, that might be exactely what you must not do then. |
| 03:22.28 | WIMPy | WTF??? |
| 03:22.50 | WIMPy | "Circular dependency" does not soond good. |
| 03:24.01 | drmessano | We used to call that something else |
| 03:24.38 | WIMPy | Is there an easy way to tell where I fucked that up? |
| 03:24.40 | jaytee | or a busted franistat |
| 03:46.36 | tyman | Compiled dahdi-complete on my linode slice without errors. Starting dahdi gives me the following: http://pastebin.com/Ek6mDAT0 |
| 03:47.49 | tyman | kernel source matches my running kernel as indicated with uname -r in pastie |
| 03:48.02 | WIMPy | Have you exchanged only the kernel without the headers at some point? |
| 03:48.38 | WIMPy | Is it the source of the running kernel? |
| 03:48.39 | tyman | WIMPy: no |
| 03:49.04 | WIMPy | There are some configuration options that have to match. |
| 03:49.43 | WIMPy | You need the correct headers and config for the running one. |
| 03:49.51 | tyman | WIMPy: the running kernel is from linode. They gave me the source and config'd as was running on my current kernel. Just had to make it |
| 03:50.23 | tyman | and make modules_install |
| 03:50.57 | WIMPy | So you made a new kernel? |
| 03:51.02 | tyman | obviously they may have changed their kernel config from my running compiled kernel |
| 03:51.20 | tyman | WIMPy: didnt install it |
| 03:51.53 | WIMPy | is getting confused. Who did what? And in what order? |
| 03:52.05 | tyman | fired up a new slice |
| 03:52.19 | tyman | kernel from linode running on slice |
| 03:52.26 | tyman | needed dahdi |
| 03:53.10 | tyman | pulled dahdi down and contacted linode for their kernel source |
| 03:53.26 | tyman | they're not using centos kernel source |
| 03:53.52 | tyman | confirmed the source version matched my running version |
| 03:54.04 | tyman | compiled dahdi against it successfully without errors |
| 03:54.18 | tyman | starting dahdi gave me http://pastebin.com/Ek6mDAT0 |
| 03:54.27 | tyman | that's where i'm at |
| 03:55.05 | WIMPy | Then it does not seem to match. |
| 03:55.29 | tyman | yeah... |
| 03:55.40 | WIMPy | Do you have a /proc/config.gz? |
| 03:55.42 | tyman | they must have changed their source config |
| 03:55.52 | tyman | i should...one moment |
| 03:56.05 | tyman | yeah |
| 03:56.14 | tyman | ls |
| 03:56.21 | tyman | oops |
| 03:57.12 | WIMPy | ok, then gunzip < /proc/config.gz >/usr/src/linux/.config and try that. |
| 03:57.21 | tyman | yeah...working on that.. |
| 03:57.34 | tyman | good idea...been awhile |
| 04:07.08 | *** join/#asterisk shmaltz (~chatzilla@mail.dmaven.com) |
| 04:07.46 | tyman | WIMPy: same exact result |
| 04:08.18 | tyman | WIMPy: made against .config from /proc/config.gz |
| 04:08.50 | tyman | the kernel linode is using is pretty old |
| 04:09.41 | WIMPy | did you make oldconfig? |
| 04:09.50 | *** join/#asterisk JerJer (~JerJer@asterisk/original-h323-guy/JerJer) |
| 04:10.35 | tyman | WIMPy: damn... |
| 04:15.06 | JerJer | Let it snow, let it snow, let it snow  |
| 04:16.12 | tyman | JerJer: where are you at? Chicago? |
| 04:17.22 | JerJer | michigan |
| 04:17.31 | tyman | oh geez... |
| 04:18.28 | JerJer | forecast 10 to 16 inches |
| 04:18.54 | tyman | temp? |
| 04:19.23 | JerJer | 19 |
| 04:21.15 | tyman | WIMPy: |
| 04:21.46 | tyman | copied config from /proc/config.gz into /usr/src/linux |
| 04:21.54 | tyman | make clean |
| 04:22.00 | tyman | sorry |
| 04:22.05 | WIMPy | to .config? |
| 04:22.05 | tyman | make clean...then copied |
| 04:22.11 | tyman | y |
| 04:22.26 | tyman | sorry copied config to /usr/src/linux/.config |
| 04:22.31 | tyman | make oldconfig |
| 04:22.33 | tyman | make config |
| 04:22.43 | tyman | make modules_install |
| 04:23.09 | tyman | then reinstalled dahdi...after a make clean for it too |
| 04:23.58 | WIMPy | Looks right. |
| 04:24.13 | tyman | only error in dmesg (repeats about 60x) is dahdi: disagrees about version of symbol __memcpy |
| 04:24.13 | tyman | dahdi: Unknown symbol __memcpy (err -22) |
| 04:24.48 | tyman | dahdi compiles with no errors except for missing gtk (which should be fine...no cards to config anyway) |
| 04:25.05 | WIMPy | ok |
| 04:25.22 | WIMPy | Looks like you have an incompatible toolchain. |
| 04:25.46 | tyman | glibc and/or gcc? |
| 04:26.48 | WIMPy | I'd vote for glibc. But I'm far from sure about that. Never ran into that situation. |
| 04:27.47 | tyman | I'm sure it's simple for the devs |
| 04:28.07 | tyman | that understand the implementation |
| 04:28.27 | tyman | thanks for your help WIMPy |
| 04:28.53 | WIMPy | Any reason not to install the kernel from the source? |
| 04:29.45 | tyman | the slice domU i'm running on has the kernel config'd to point to their kernel... |
| 04:30.28 | tyman | i need dahdi for meetme pretty badly...was trying to get this rolling tonight for tomorrow... |
| 04:30.48 | WIMPy | Can't do with confbridge? |
| 04:31.18 | tyman | confbridge is running now... |
| 04:31.44 | tyman | some features missing that meetme has |
| 04:31.51 | WIMPy | If you took the config from the running kernel, it sould behave exactely as the old one. |
| 04:32.23 | tyman | yeah...thats crazy....i'm not sure how this isn't working |
| 04:33.27 | WIMPy | meant: There shouldn't be any reason you can't install and use your own kernel the same way the currently running one does. |
| 04:33.37 | WIMPy | Plan B: |
| 04:33.56 | WIMPy | Wasn't there also the possibility to time meetme from the old misdn? |
| 04:34.34 | WIMPy | But I'm not sure if that depends on hardware. |
| 04:34.58 | tyman | MeetMe "doesn't just require DAHDI because of timing it also requires it because the actual conferencing engine/mixing takes place inside of DAHDI itself." |
| 04:35.17 | WIMPy | And generelly it used to be a bit iffy to get the right version for your system so that might end up no better than now. |
| 04:35.46 | WIMPy | Oh, I think you're right. |
| 04:35.46 | *** join/#asterisk tyman_ (~tyler@173-12-219-179-Fresno.hfc.comcastbusiness.net) |
| 04:36.03 | WIMPy | Oh, I think you're right. |
| 04:36.24 | tyman_ | another option would be to just config the extra func to make confbridge behave similarly to meetme |
| 04:36.51 | WIMPy | I'm sure, others would appreciate that as well. |
| 04:44.42 | *** join/#asterisk ClintGoudie-Nice (~clint@174-23-236-193.slkc.qwest.net) |
| 04:45.06 | *** join/#asterisk jcape (~James_Cap@c-76-16-97-76.hsd1.il.comcast.net) |
| 04:45.18 | *** part/#asterisk jcape (~James_Cap@c-76-16-97-76.hsd1.il.comcast.net) |
| 05:05.57 | *** join/#asterisk lanning (~lanning@173-8-187-197-SFBA.hfc.comcastbusiness.net) |
| 05:13.45 | *** join/#asterisk timahvo1 (~rogue@41.72.215.94) |
| 05:33.38 | *** join/#asterisk sourcode (~code@ppp-58-8-85-239.revip2.asianet.co.th) |
| 05:40.30 | *** join/#asterisk sawgood (~sawgood@173-13-158-27-sfba.hfc.comcastbusiness.net) |
| 05:45.41 | *** join/#asterisk jkroon (~jkroon@dsl-241-228-210.telkomadsl.co.za) |
| 05:46.10 | *** join/#asterisk recluze (~recluze@119.153.4.112) |
| 05:50.04 | recluze | hi, I'm running trixbox and trying to call a custom AGI script when extension 210 is dialled. I can't get it to work because when I "include", the included portion executes but the rest stops working |
| 05:50.12 | recluze | http://pastebin.com/0Y495bez |
| 05:50.47 | WIMPy | Better try #trixbox |
| 05:51.20 | recluze | ok thanks |
| 05:51.56 | recluze | there's not many people there but I'll give it a try |
| 05:52.33 | WIMPy | But you have much better chances, that they have an idea of trixbox's dialplan flow. |
| 05:53.04 | recluze | yeah but I think it's just some stupid mistake I'm making (being a newbie) |
| 05:54.16 | WIMPy | I don't see any AGI call in your pb. |
| 05:54.27 | sawgood | What is a 'good' approach to take when say three or four staff members need to 'monitor' the "general voicemail" box, but only one person can register a SIP 'extension' |
| 05:55.02 | *** join/#asterisk darkskiez (~mhb@darkskiez.ipv6.darkskiez.co.uk) |
| 05:55.19 | WIMPy | Not sure what you mean. |
| 05:55.40 | WIMPy | You can have the same mailbox on multiple peers. |
| 05:55.58 | recluze | WIMPy, I can't even get the NoOp to execute properly |
| 05:56.05 | recluze | if that starts working, the AGI should be easy |
| 05:56.23 | sawgood | Well, bottom line is I would to have a separate VM button on each phone (and not use the built in MWI for their registered extension) |
| 05:57.02 | WIMPy | sawgood: You can do both. |
| 05:57.13 | sawgood | If you could offer advice, I would appreciate it |
| 05:57.19 | sawgood | here is the example ... |
| 05:57.53 | sawgood | workers are x101, x102, x103 (they each have their own extension registered) and their MWI works correctly for their own extension |
| 05:57.55 | WIMPy | recluze: That's the kind of question you definitely should ask in #trixbox. |
| 05:58.13 | sawgood | x401 is the general voicemail box (virtual extension) does not get registered at any phone |
| 05:58.19 | *** join/#asterisk nix8n82 (~nate@63.162.28.112) |
| 05:58.20 | recluze | I did... still waiting if anyone would answer |
| 05:58.28 | WIMPy | Ok, so you need multiple mailboxes per account. |
| 05:58.50 | WIMPy | recluze: It's probably not the best time of day. |
| 05:58.58 | sawgood | right, I have for example x101&x401 x102&x401 |
| 05:59.02 | recluze | yeah, I guess |
| 05:59.22 | sawgood | problem is ... when the MWI goes ON (the worker does not know which extension the VM is left for) |
| 05:59.30 | sawgood | they have to check both VMs most of the time |
| 06:00.21 | WIMPy | I only do it with one mailbox per account and multiple accounts per phone. |
| 06:00.25 | sawgood | So, if there was a way to 'mask' an extension with something like a misc. destination or BLF process (as a work around) I could settle for that |
| 06:00.59 | WIMPy | You still don't see which mailbox the new message belongs to, but at least you get the right mailbox when you press the button. |
| 06:01.11 | sawgood | really ? |
| 06:01.24 | sawgood | how can more than one extension be registered at more than one phone at a time? |
| 06:01.57 | WIMPy | No, it's two accounts per phone. |
| 06:02.18 | sawgood | two mailbox accounts? |
| 06:03.07 | WIMPy | You could also hook up somethin using an AGI or via AMI that sets a custom devstate for the general mailbox. |
| 06:03.08 | *** join/#asterisk mintos (~mvaliyav@nat/redhat/x-ycsbtwypuuflvesq) |
| 06:03.33 | WIMPy | No, two accounts with one (possibly shared) mailbox each. |
| 06:04.07 | sawgood | like x101 (VM is x401) and x102 (VM is x401) |
| 06:04.26 | WIMPy | yes |
| 06:04.41 | sawgood | that would work, but then they would not have a personal voicemail box, right? |
| 06:05.16 | WIMPy | That's whe the multiple accounts per phone come in. |
| 06:05.49 | sawgood | oh ... two accounts x101 with x101 for VM and a x101 with a x401 for VM |
| 06:05.52 | WIMPy | lets say yu got the first phone with account x101 and VM x101 and 2nd account x40101 with VM x401. |
| 06:06.09 | WIMPy | then 2nd phone with account x102 and VM x102 and 2nd account x40102 with VM x401. |
| 06:06.19 | WIMPy | And so on. |
| 06:07.00 | WIMPy | But depending on the number of phones a custom devstaate for the general mailbox via the dialplan might be nicer. |
| 06:07.33 | WIMPy | It surely has the benefit that either you MWI blinks or some other button depending on which mailbox holds messages. |
| 06:11.10 | sawgood | excellent |
| 06:11.21 | sawgood | two accounts (each mapped to a differnt VM account) |
| 06:11.23 | sawgood | I am trying this now |
| 06:22.08 | *** join/#asterisk rajiv (~rajiv@gentoo/developer/rajiv) |
| 06:32.16 | *** join/#asterisk Kumbang (~kumbang@180.245.137.5) |
| 06:46.51 | *** join/#asterisk Olivier_54 (~Olivier_5@vaillant.famille-fontes.net) |
| 07:18.08 | *** join/#asterisk Iamnacho (~Iamnacho@ip174-70-138-161.ks.ks.cox.net) |
| 07:23.52 | *** join/#asterisk shapr (~shapr@nat/digium/x-quzsfojfkhpqaylc) |
| 07:26.44 | BlackBishop | I got another extension (sip username/password ) in an asterisk server, how would I go if I'd want some of the stuff I dial to go through that extension ? |
| 07:28.57 | *** join/#asterisk DJClean (~djclean@unaffiliated/djclean) |
| 07:32.00 | kaldemar | BlackBishop: define "some of the stuff i dial" and "go through that extension" please. |
| 07:43.23 | *** join/#asterisk dlirit (~lirant@80.74.100.10) |
| 07:44.06 | *** join/#asterisk geneg1 (~gene@173-230-163-176.cable.teksavvy.com) |
| 07:46.46 | *** join/#asterisk sgimeno (~chatzilla@163.117.211.10) |
| 07:53.12 | *** join/#asterisk schmidts (~schmidts@Lo20-rt01.lm33.sil.at) |
| 07:53.13 | schmidts | good morning |
| 07:54.38 | kleszcz | hi |
| 08:05.44 | *** join/#asterisk Cain (~Geek@unaffiliated/cain) |
| 08:09.54 | *** join/#asterisk oziGermany (oz@85.183.60.150) |
| 08:10.22 | oziGermany | Hi everyone this is my first time on this channel |
| 08:10.48 | schmidts | welcome ozigermany |
| 08:11.29 | *** join/#asterisk tyman (~tyler@173-12-219-178-Fresno.hfc.comcastbusiness.net) |
| 08:11.30 | oziGermany | Hi I have a big problem and hop that someone could help me the CLI show the following problem: chan_dahdi.c:13691 dahdi_pri_error: 1 Unable to receive TEI from network in state 2(Assign awaiting TEI)! |
| 08:12.33 | oziGermany | I m using Dahdi Libpri 1.4.11.5 and Dahdi 2.4.0 and a Digium B410P |
| 08:13.54 | oziGermany | .. |
| 08:15.28 | schmidts | ozigermany what do you see when you make a dahdi show status? |
| 08:15.39 | oziGermany | sec. |
| 08:16.08 | oziGermany | B4XXP (PCI) Card 0 Span 1 OK 0 0 0 CCS AMI 0 db (CSU)/0-133 feet (DSX-1) |
| 08:16.21 | oziGermany | this is the first and only span |
| 08:17.37 | *** join/#asterisk Dovid (~Dovid@213.8.121.90) |
| 08:17.53 | oziGermany | schmidts wollen wir nicht auf deutsch? |
| 08:17.59 | Dovid | morning ev1 |
| 08:26.18 | *** join/#asterisk manji (~manjiki@penicuik.physics.upatras.gr) |
| 08:26.48 | *** join/#asterisk hehol (~hehol@2001:1438:1009:200:51f6:f605:8e5c:327b) |
| 08:28.58 | *** join/#asterisk tzafrir_laptop (~tzafrir@local.xorcom.com) |
| 08:29.21 | *** join/#asterisk tamiel (~tamiel@213.30.183.226) |
| 08:33.48 | *** join/#asterisk gerhard7 (~gerhard7@212-123-146-122.ip.telfort.nl) |
| 08:40.14 | *** join/#asterisk Faustov (~fst@gentoo/user/faustov) |
| 08:58.36 | *** join/#asterisk mayfield (~mayfaild@76-250-152-203.lightspeed.snantx.sbcglobal.net) |
| 08:59.17 | *** join/#asterisk As001 (~IPN05@194.106.175.113) |
| 08:59.59 | As001 | hi I have problems with sound on my Asterisk 1.6.2.11. Sound is choppy, it is cutting. I wonder can you help me ? |
| 09:00.42 | As001 | I think links on both sides are fine, ping is ok no more than 2% packet loss |
| 09:01.00 | manji | As001: are you using asterisk on a VM or sth? |
| 09:01.36 | schmidts | As001 not more than 2% ?? how do you ping ? cause normal icmp doesnt say much about udp trafic |
| 09:02.01 | As001 | I use only sip protocol agents are registered on asterisk and i have sip account for sip provider |
| 09:02.06 | As001 | i used normal ping |
| 09:02.22 | As001 | manji what is VM what is sth ? |
| 09:02.57 | schmidts | As001 what os do you use? if possible install hping and then try it again with the following command: sudo hping -c 5000 -o 0xb8 -i u20000 IPOFYOURSERVER |
| 09:03.15 | mayfield | as001, whats latency on the end points w/ a sip show peers? |
| 09:03.15 | As001 | debian |
| 09:03.42 | As001 | from 50 to 148 ms |
| 09:04.01 | schmidts | As001 aptitude install hping ;) |
| 09:04.22 | mayfield | as001, you may need to look into adjusting jitter buffers. |
| 09:04.30 | manji | As001: Virtual machine |
| 09:04.33 | As001 | i set it on 200ms |
| 09:07.00 | As001 | it says i can install hping2 or hping2 |
| 09:07.02 | As001 | hping3 |
| 09:07.43 | As001 | hping -c 5000 -o 0xb8 -i u20000 195.252.110.113 |
| 09:07.49 | As001 | oh. ... dam |
| 09:08.22 | As001 | 75 package lost |
| 09:08.34 | As001 | i wanted to say 7% lost |
| 09:08.47 | *** join/#asterisk jkroon (~jkroon@dsl-240-159-136.telkomadsl.co.za) |
| 09:09.22 | As001 | it was ping from server to point where operators are |
| 09:10.04 | *** join/#asterisk heffer (~felix@fedora/heffer) |
| 09:10.05 | schmidts | thats why you have choppy sound ;) |
| 09:10.22 | schmidts | local network or through internet? |
| 09:10.26 | As001 | i lost 4 to 7 % how long do I need to let this ping ? |
| 09:10.51 | As001 | operators are behinig one link and server is in other country behind other link |
| 09:11.19 | As001 | operators are all behind nat in LAN |
| 09:11.55 | *** join/#asterisk kaushal (~kaushal@182.72.14.170) |
| 09:11.57 | kaushal | hi |
| 09:12.14 | kaushal | quit |
| 09:13.24 | schmidts | As001 you can use mtr and see at which hop you loss starts, maybe its a problem there or somewhere else on the way, but it sounds like you cant do much against it |
| 09:13.51 | As001 | that was think I was afraid of.. |
| 09:14.12 | As001 | ok thanks |
| 09:14.20 | schmidts | whats the round trip time hping tells you? |
| 09:14.28 | schmidts | min/avg/max |
| 09:15.04 | As001 | round-trip min/avg/max = 40.9/57.5/122.6 ms |
| 09:16.12 | schmidts | ok atleast you will not loose packets cause they are too late, the difference between avg and max will also count as loss if this is greater than your jitter buffer |
| 09:19.57 | *** join/#asterisk creativx (~creadurex@226.62-97-205.bkkb.no) |
| 09:22.49 | *** join/#asterisk dimm (~ubuntuser@unaffiliated/dimm) |
| 09:40.08 | *** part/#asterisk As001 (~IPN05@194.106.175.113) |
| 09:48.05 | *** join/#asterisk Tim_Toady (~moi@178.128.34.182) |
| 09:55.08 | *** join/#asterisk As001 (~IPN05@194.106.175.113) |
| 09:55.48 | creativx | hum |
| 09:56.47 | *** join/#asterisk debugger1oy (~anish@117.215.195.77) |
| 09:56.50 | creativx | in 1.4.. func_moh.so is loaded, but cli keeps giving this message: Music class ringing requested but no musiconhold loaded. |
| 09:58.11 | creativx | and moh doesnt work, obviously :> |
| 09:59.55 | creativx | nor does the moh keyword in cli |
| 10:02.47 | *** join/#asterisk af_ (~getsmart@78.134.21.140) |
| 10:07.19 | kerframil | creativx: app_voicemail should also be loaded |
| 10:08.22 | kerframil | creativx: never mind, didn't read the question properly. sorry. |
| 10:10.50 | kerframil | creativx: rather, check for res_musiconhold.so also |
| 10:11.00 | *** join/#asterisk astro__ (astro@silvia.drft.net) |
| 10:22.39 | *** join/#asterisk guilhermebr (~Guilherme@200.103.96.98) |
| 10:23.05 | *** join/#asterisk krion (~seb@unaffiliated/krion) |
| 10:26.50 | *** part/#asterisk As001 (~IPN05@194.106.175.113) |
| 10:27.21 | *** join/#asterisk van_nostran (~mike@ool-4571ab96.dyn.optonline.net) |
| 10:28.16 | *** join/#asterisk awclin (~alinford@80.76.116.35) |
| 10:29.35 | *** part/#asterisk van_nostran (~mike@ool-4571ab96.dyn.optonline.net) |
| 10:30.30 | *** join/#asterisk van_nostran (~mike@ool-4571ab96.dyn.optonline.net) |
| 10:32.07 | van_nostran | hi all |
| 10:32.07 | *** join/#asterisk ccesario (~ccesario@187.75.139.188) |
| 10:33.15 | van_nostran | can someone point me to a diecent sip trunking provided with a pop un australia - need US DIDs though |
| 10:34.26 | Tozz_ | r u sure that is allowed? eg. here in THe Netherlands and also in France you need a local address in the country where u want DID's from |
| 10:35.03 | van_nostran | hmm yeah we can prove us residence |
| 10:35.13 | Tozz_ | k |
| 10:35.38 | van_nostran | we'd use our provider but the latency is too high |
| 10:36.00 | van_nostran | need someone with a POP in AU |
| 10:37.16 | yenkee | exit |
| 10:40.26 | *** join/#asterisk Tim_Toady (~moi@77.49.226.75.dsl.dyn.forthnet.gr) |
| 10:40.50 | *** part/#asterisk van_nostran (~mike@ool-4571ab96.dyn.optonline.net) |
| 11:03.10 | *** join/#asterisk bdfoster (~bdfoster@unaffiliated/bdfoster) |
| 11:22.43 | *** join/#asterisk kjs (~kjs@fedora/kjs) |
| 11:23.54 | kjs | I have setup my business partners DDI to ring my phone if he does not answer within 15 seconds, is there a way to display "$name DDI" on my phone ? |
| 11:24.26 | creativx | kerframil: I dont have res_musiconhold.so in /usr/lib .. so I must have done something during make =) |
| 11:36.07 | *** join/#asterisk ickmund (~ickmund@cli-5b7e85cc.bcn.adamo.es) |
| 11:36.49 | kaldemar | kjs: use func CALLERID to set what you want to see. |
| 11:39.07 | *** join/#asterisk BlackBishop (dexter@d3xt3r01.tk) |
| 11:55.42 | creativx | so to get res_musiconhold.so back into asterisk - do I need to make again? |
| 11:56.04 | *** join/#asterisk csnook (~chris@c-76-19-64-161.hsd1.ma.comcast.net) |
| 12:05.13 | *** join/#asterisk mzahariev (adminimini@piem-peem-pushim-v.unixsol.org) |
| 12:27.56 | *** join/#asterisk Tim_Toady (~moi@79.103.48.119.dsl.dyn.forthnet.gr) |
| 12:29.41 | *** join/#asterisk satonio (d56073a8@gateway/web/freenode/ip.213.96.115.168) |
| 12:29.46 | satonio | hi |
| 12:30.01 | satonio | is it possible to run a program when there is a incoming call? |
| 12:30.28 | satonio | i mean by configuration, without changing the source code |
| 12:31.50 | atan | http://www.voip-info.org/wiki/view/Asterisk+cmd+Exec ? |
| 12:38.16 | Tozz_ | http://lmgtfy.com/?q=asterisk+run+a+program+when+there+is+a+incoming+call%3F |
| 12:44.14 | *** join/#asterisk coppice (~chatzilla@190.131.92.116.dyn.pacific.net.hk) |
| 12:47.23 | *** join/#asterisk FiReSTaRT (~dlyh@unaffiliated/firestart) |
| 12:51.03 | *** join/#asterisk Trixboxer (~Trixboxer@office.supportdepartment.net) |
| 12:59.13 | *** join/#asterisk leifmadsen (~Leif@asterisk/documenteur-extraordinaire/blitzrage) |
| 12:59.13 | *** mode/#asterisk [+o leifmadsen] by ChanServ |
| 13:01.51 | *** join/#asterisk wesphillips (~wphillips@64-19-240-7.caprock.net) |
| 13:19.23 | *** join/#asterisk CyberPony (~CyberPony@cpe-075-181-142-115.carolina.res.rr.com) |
| 13:23.42 | *** join/#asterisk joachim_- (~joachim@post.comvie.no) |
| 13:25.03 | joachim_- | Is there anyway i can get Asterisk to trigger a command or alert me if Asterisk crashes? I have sucessfully setup heartbeat but that will only help me if hardware failure... Any ideas? |
| 13:28.40 | mzahariev | joachim_-: check monit |
| 13:32.49 | *** join/#asterisk zorp75ck (~zorp75ck@pool-72-72-229-245.altnpa.east.verizon.net) |
| 13:39.29 | *** join/#asterisk gerhard7 (~gerhard7@212-123-146-122.ip.telfort.nl) |
| 13:48.03 | *** join/#asterisk rrb3942 (~rbullock@208.34.105.161) |
| 14:00.03 | leifmadsen | joachim_-: or use the safe_asterisk script which has a NOTIFY option to email on restart |
| 14:03.10 | *** join/#asterisk wesphillips (~wphillips@64-19-240-7.caprock.net) |
| 14:04.43 | *** join/#asterisk [Outcast] (~anonymous@64.202.62.5) |
| 14:06.06 | *** join/#asterisk doolittlework (~doolittle@41-134-22-10.dsl.mweb.co.za) |
| 14:08.16 | Katty | holy snickerdoodles batman it's cold out there |
| 14:08.49 | doolittlework | i have a problem with my asterisk box i have 2 b410p BRI ISDN cards installed and have a total of 6 lines connected to them, my problem is that i can get incomming calls but ever so often the call comes in it rings the switchboard extension but when i pick up the call it just dead but in the cli it still says its ringing the switchboard phone |
| 14:09.10 | doolittlework | running asterisk 1.6 |
| 14:09.55 | kjs | humm, I have this strange problem... I was using a different phone which was working fine, I have replacedthe phone with a different brand and now when it registers on the cli it still shows the old phone name. I can make calls out it's registered but all incoming calls fail |
| 14:10.27 | kjs | gives me the error |
| 14:10.33 | kjs | circuit-busy |
| 14:11.07 | kerframil | creativx: are you building directly from the sources? |
| 14:13.40 | kerframil | creativx: if so, run make menuselect and make sure that it's actually enabled (in the Resource Modules category) |
| 14:13.48 | *** join/#asterisk Cain (~Geek@unaffiliated/cain) |
| 14:17.17 | creativx | kerframil: yes thats what I did two days ago, upgrading from old 1.2 box to fresh 1.4 |
| 14:17.22 | creativx | from source, i probably cocked up menuselect |
| 14:17.45 | creativx | is there any big deal in redoing make menuselect && make on the box (Even if its now in production?) |
| 14:21.03 | kerframil | creativx: the defaults should be reasonable. you can also interact with menuselect in this fashion: menuselect/menuselect --enable res_musiconhold menuselect.makeopts |
| 14:21.31 | kerframil | creativx: menuselect.makeopts would initially be produced by make menuselect, iirc |
| 14:22.07 | creativx | ok, as long as it wont cock up asterisk |
| 14:22.08 | creativx | hehe |
| 14:22.26 | creativx | I realize I would have to stop asterisk first, then menuselect and make |
| 14:22.55 | kerframil | creativx: if all else fails, make clean and try again. you can copy the existing source tree if you're worried. you don't have to stop asterisk in order to build it. you'd probably want to do so before running make install though. |
| 14:24.20 | creativx | mkay thanks |
| 14:24.29 | creativx | i'll just snapshot the VM before I go |
| 14:31.22 | *** join/#asterisk ickmund (~ickmund@cli-5b7e85cc.bcn.adamo.es) |
| 14:32.34 | *** join/#asterisk JerJer (~JerJer@asterisk/original-h323-guy/JerJer) |
| 14:38.20 | *** join/#asterisk sysreq (~sysreq@unaffiliated/sysreq) |
| 14:38.47 | *** join/#asterisk ketas (ketas@ketas6-sixxs.si.pri.ee) |
| 14:47.27 | *** join/#asterisk nicola_pav (~nicola_pa@mail2.tikalnetworks.com) |
| 14:47.45 | nicola_pav | hello. i am trying to install asterisk 1.4 on centos |
| 14:47.56 | nicola_pav | i am getting some erros when i make |
| 14:48.08 | nicola_pav | when i run make |
| 14:48.40 | nicola_pav | app_dahdiscan, app_dahdibarge, app_dahdiras |
| 14:48.45 | nicola_pav | any hints? |
| 14:49.08 | malcolmd | dahdi installed prior to asterisk? |
| 14:49.15 | nicola_pav | yes |
| 14:49.42 | malcolmd | what versions of dahdi and asterisk and what error(s)? |
| 14:49.51 | nicola_pav | dahdi-linux and dahdi-tools are installed |
| 14:49.51 | malcolmd | and what version of centos? |
| 14:49.58 | nicola_pav | centos 5 |
| 14:50.02 | leifmadsen | 5.x? |
| 14:50.16 | leifmadsen | what version of dahdi-linux and dahdi-tools? |
| 14:50.17 | *** join/#asterisk The_Boy_Wonder (~vossel@asterisk/batman-developer/dvossel) |
| 14:50.32 | leifmadsen | what version of 1.4? |
| 14:51.33 | nicola_pav | asterisk 1.4.36 |
| 14:52.24 | nicola_pav | dahdi-linux 2.4.0, dahdi-tools 2.4.0 |
| 14:52.51 | leifmadsen | what are the errors? |
| 14:54.09 | nicola_pav | cetnos 5.5 |
| 14:55.55 | nicola_pav | the errors |
| 14:56.32 | *** join/#asterisk frigidzephyr (~rnewton@nat/digium/x-ypzbstpwtdjwnwfo) |
| 14:56.35 | nicola_pav | http://pastebin.com/pPdnnium |
| 14:56.43 | nicola_pav | can u check the link please ^^ |
| 14:57.05 | leifmadsen | that's a menuselect problem -- re-run ./configure && make menuselect |
| 14:57.20 | leifmadsen | looks like you've copied over an old menuselect.makeopts file |
| 14:57.51 | nicola_pav | i am running it now |
| 14:57.54 | nicola_pav | i had more erros |
| 14:58.06 | nicola_pav | but i looked in google and installed packages |
| 14:58.15 | nicola_pav | some of the errors were solved |
| 14:58.40 | nicola_pav | i tired ur suggestion |
| 14:58.44 | nicola_pav | same errors |
| 14:59.06 | nicola_pav | i can remove like res_jabber |
| 14:59.09 | nicola_pav | i do not need it |
| 14:59.13 | nicola_pav | but waht about dahdi? |
| 14:59.15 | leifmadsen | make distclean |
| 14:59.21 | leifmadsen | ./configure && make menuselect && make |
| 14:59.23 | leifmadsen | rebuilt it |
| 14:59.42 | leifmadsen | the errors you're getting seem to be menuselect errors -- might have to clear out the menuselect/ subdir too with a make clean |
| 14:59.56 | leifmadsen | what about dahdi? those errors have nothing to do with dahdi -- it has to do with menuselect |
| 15:00.05 | nicola_pav | i am running the suggestion now |
| 15:00.10 | nicola_pav | ah ok |
| 15:00.12 | leifmadsen | runs off to do some work |
| 15:00.14 | nicola_pav | my bad |
| 15:00.43 | *** join/#asterisk luckman212 (~quassel@pool-173-77-253-145.nycmny.fios.verizon.net) |
| 15:01.06 | nicola_pav | make is running now |
| 15:03.47 | *** join/#asterisk puzzled (~patrick@puzzled.xs4all.nl) |
| 15:06.51 | nicola_pav | leifmadsen: thank u very much |
| 15:07.10 | nicola_pav | when ran distclean and ./configure && make menuselect && make it worked |
| 15:07.37 | Katty | hmm. |
| 15:07.45 | *** join/#asterisk putnopvut (~putnopvut@asterisk/master-of-queues/mmichelson) |
| 15:07.45 | *** mode/#asterisk [+o putnopvut] by ChanServ |
| 15:07.55 | Katty | i have 3lbs of ground beef/turkey |
| 15:08.09 | Katty | gonna make 3 recipes. so far spaghetti is one of them. |
| 15:08.11 | Katty | suggestions? |
| 15:11.15 | bdfoster | mmmm... hamburger... |
| 15:11.24 | *** join/#asterisk drift- (ae3001a4@gateway/web/freenode/ip.174.48.1.164) |
| 15:14.44 | *** join/#asterisk zorp75ck (~zorp75ck@pool-72-72-229-245.altnpa.east.verizon.net) |
| 15:15.28 | JerJer | meatloaf |
| 15:15.53 | Katty | actually looking for a casserole sort of thing |
| 15:16.05 | JerJer | Gulash |
| 15:16.10 | Katty | what's that? |
| 15:16.36 | JerJer | beef, elbow noodles and a tomato based sause |
| 15:16.46 | JerJer | Goulash |
| 15:17.10 | JerJer | hungarian (as so google tells me) |
| 15:17.23 | JerJer | its something my family has made -- i'm sick of it |
| 15:17.44 | JerJer | made for years * |
| 15:25.31 | Katty | hmm sounds yummy |
| 15:25.58 | frigidzephyr | I can second the Goulash angst |
| 15:26.02 | frigidzephyr | my mom made that for years |
| 15:26.05 | frigidzephyr | i never liked it, not once |
| 15:26.38 | Katty | sounds like a beef stew with noodles in it |
| 15:32.02 | *** join/#asterisk SparFux1 (~raoul@e182025231.adsl.alicedsl.de) |
| 15:32.56 | SparFux1 | tzafrir_laptop: Hi! Is there a tutorial how to use your gitorious asterisk-tools to only build the zaphfc module and echo cancellers and not all other hardware drivers? |
| 15:33.55 | WIMPy | SparFux1: Did I get that right the other day, that you created yet another version of zaphfc? |
| 15:37.23 | *** join/#asterisk devons (HydraIRC@173-230-165-200.cable.teksavvy.com) |
| 15:37.30 | *** join/#asterisk Tech_Travis (~Travis_El@cpe-76-168-191-127.socal.res.rr.com) |
| 15:37.33 | SparFux1 | WIMPy: close. Basically I just packed everything into one ready-to-build-only-zaphfc driver tree and updated it to compile cleanly with latest dahdi svn. |
| 15:38.32 | SparFux1 | WIMPy: but tzafrir_laptop told me about gitourious git trees which seem to be much more versatile and way to go. But I don't see an obvious solution to just build the zaphfc or any other driver alone. I think most ppl would not want to build all the hardware drivers, but only one. |
| 15:38.43 | *** join/#asterisk sekil (~sekil@80.93.247.26) |
| 15:39.32 | *** join/#asterisk Tim_Toady (~moi@79.103.48.119.dsl.dyn.forthnet.gr) |
| 15:39.58 | SparFux1 | my git repo is this: http://sourceforge.net/projects/dahdi-zaphfc/ You can easily see that there's nothing new or better in there I think and thus it's only a diversion and I think I will kill it. |
| 15:42.28 | SparFux1 | WIMPy: look at this: http://gitorious.org/dahdi-extra seems much better. |
| 15:43.25 | SparFux1 | But I am looking into it to check if there is an easy way to build latest svn with only zaphfc. |
| 15:43.52 | SparFux1 | "The default target here is to build all the modules." comment looks promising :-P |
| 15:44.20 | SparFux1 | DAHDI headers are required, so I think first I have to install dahdi-linux. |
| 15:44.38 | SparFux1 | optimally dahdi-linux with no hardware drivers at all, but only echo cancellors. |
| 15:44.46 | *** join/#asterisk wesphillips (~wphillips@64-19-240-7.caprock.net) |
| 15:46.30 | SparFux1 | And btw, the FW_LOADER var should be set to n optionally and firmware not be downloaded. |
| 15:46.50 | WIMPy | Yes, some menuselect thing to dahdi might be nice. I repeadedly removed some drivers some longer time ago when I had difficulties to get them to compile. |
| 15:46.55 | WIMPy | Oned I didn't need anyway. |
| 15:47.24 | WIMPy | That definitely seems sensible to me. |
| 15:47.36 | SparFux1 | Yeah and it's a matter of compile time even. |
| 15:48.33 | SparFux1 | I agree with ahving all software echo cancellers and the like, thinkgs I at least *could* use somehow. Same goes for kernel stuff, there should be flags for modules which special hardware is required for. I would select them according to my hardware, and all other software features may be build into the kernel, I'd agree. |
| 15:49.41 | creativx | err so res_musiconhold depends on dahdi, dahdi depends on.. hardware?? |
| 15:50.09 | WIMPy | creativx: No and no. |
| 15:51.35 | creativx | WIMPy: then why is menuselect going all XXX on res_musiconhold .. ? saying it depends on dahdi(e) |
| 15:53.26 | WIMPy | creativx: Right it udes to be that way in erarlier versions. |
| 15:54.10 | creativx | this is 1.4.. and I am at a loss as how to get res_musiconhold back into the game =) |
| 15:54.19 | creativx | ip-only box |
| 15:54.25 | brainiac | Does anyone have an idea about why remote phones suddenly disconnect after 1-2 days and have to be rebooted to connect? |
| 15:55.12 | WIMPy | creativx: With 1.4 you need dahdi, or fir earlier versions of 1.4 even zaptel/ztdummy. But you don't need hardware anyway. |
| 15:56.25 | creativx | ok.. so dadhi dummy |
| 15:58.00 | creativx | which wont work well in a VM .. wee yippey |
| 15:58.21 | SparFux1 | well, how do I build dahdi with the dahdi-extra git tree? |
| 15:59.13 | *** join/#asterisk dlynes (~dlynes@70.26.126.66) |
| 16:03.28 | *** join/#asterisk calmh (~jb@acro.nym.se) |
| 16:08.21 | *** join/#asterisk Pegasus_RPG (~chatzilla@p5B0C368B.dip.t-dialin.net) |
| 16:08.50 | Pegasus_RPG | Hello there. Can anyone tell me what codec settings to use to get * to talk with QuteCom using Speex? |
| 16:09.23 | Pegasus_RPG | I've tried a bunch of settings and nothing ever works. (I get "No compatible codecs, not accepting this offer!" when I only allow the speex codec.) |
| 16:10.34 | malcolmd | core show translation recalc 10 speex is installed? you allowing speex at something other than 32kHz? 8khz only for asterisk <1.8. asterisk 1.8 allows 16kHz speex |
| 16:11.10 | drift- | anyone ever setup polycom provisioning server? |
| 16:12.14 | *** join/#asterisk Defraz (~Defraz@63.226.95.152) |
| 16:12.26 | devons | hey - I'm looking for some info on debugging phoneprov - I get "match request [phoneprov/sip.cfg] with handler [phoneprov] len 10" output on the console but a 404 error page returned. |
| 16:12.37 | Pegasus_RPG | malcolmd: ok...I can't specify a sampling rate in *. QuteCom supports 8kHz and 16kHz and I have 8kHz set as the first one to try |
| 16:13.02 | Pegasus_RPG | is on Asterisk 1.6.2.9-2 |
| 16:13.23 | SparFux1 | So, this means I'll stick with my sf.net git tree, really. It build's zaphfc only and is always to the latest svn of dahdi. |
| 16:14.26 | Pegasus_RPG | Can I use DTX? VBR? anything else? (I would just love to see a sample codecs.conf that is known to work with QuteCom but Google turns up nothing.) |
| 16:15.03 | *** join/#asterisk ClintGoudie-Nice (~clint@smtp.callware.com) |
| 16:15.13 | Pegasus_RPG | (I REALLY hate it when Google gives me results that don't actually include all search terms I entered...wtf is the point of a search engine that can't do that?!) |
| 16:15.41 | devons | drift-: I've used polycom provisioning with ftp on 1.4 but http prov isn't working for me on 1.8 |
| 16:15.43 | malcolmd | i haven't installed qutecom in a while....i'll go fire it up |
| 16:15.55 | drift- | hrm really |
| 16:16.02 | drift- | so asterisk 1.8.2.2 does not work? |
| 16:16.05 | Pegasus_RPG | malcolmd: I have QuteCom 2.2 |
| 16:16.43 | chazzam | Pegasus_RPG: try quoting things? |
| 16:16.59 | chazzam | the spell correction messes up my searches similarly to that fairly often |
| 16:18.11 | devons | I have had no luck with http phoneprov on 1.8.2.2 - trying to sort it out now |
| 16:18.13 | Pegasus_RPG | chazzam: yeah I have...try this, enter "codecs.conf" qutecom into Google. The summary shows the term "qutecom" appearing but when you go to the page (or even the cached one!!) it doesn't! |
| 16:19.05 | Pegasus_RPG | So I guess I'll need to post something on the voip-info.org page once malcolmd comes up with something :) |
| 16:20.23 | drift- | dev: correct me if i'm wrong, all you neeed is a FTP and macaddress-sip.cfg ? uploaded perfect phone... |
| 16:20.38 | drift- | configure the phone to ftp to ur tfp and thats ti right? |
| 16:21.38 | devons | yes - exactly, that works fine (and is asterisk independant) |
| 16:21.55 | creativx | gaaahh.. what is the magic to be able to select dahdi via menuselect ? |
| 16:22.05 | creativx | i feel like a dahdi dummy..! |
| 16:22.23 | *** join/#asterisk [Outcast] (~anonymous@64.202.62.5) |
| 16:22.35 | leifmadsen | creativx: make sure dahdi is installed, and make sure you've run ./configure after installing dahdi. |
| 16:22.35 | WIMPy | creativx: Did you ./configure after installing dahdi? |
| 16:23.19 | creativx | yes I just did that =) |
| 16:23.34 | creativx | No hardware timing source found in /proc/dahdi, loading dahdi_dummy |
| 16:23.35 | creativx | Running dahdi_cfg: [ OK ] |
| 16:23.50 | leifmadsen | looks fine to me |
| 16:23.51 | creativx | then i did make clean && ./configure && make menuselect in asterisk 1.4 src dir |
| 16:24.09 | creativx | I might just be blind, is there any other category in menuselect where dahdi is located? |
| 16:24.16 | creativx | all the options i've found are XXX'ed |
| 16:24.43 | creativx | which means I've cocked up.. but what is the question of the day |
| 16:24.53 | dlynes | I'm guessing 1.8.2.3 is considerably more stable than 1.8.1? |
| 16:25.05 | WIMPy | creativx: But you have a version of Asterisk that supports dahdi? |
| 16:25.53 | creativx | WIMPy: good question.. latest 1.4 from asterisk.org .. not sure in other words. must read more.. |
| 16:25.58 | dlynes | devons, what does http provisioning of a phone have to do with asterisk? That should be a function of apache, or whatever your web server is |
| 16:26.23 | *** join/#asterisk sahafeez (~sahafeez@4.53.128.211) |
| 16:26.26 | WIMPy | creativx: That should be a yes. |
| 16:26.28 | creativx | 1.4.39 is what I am running now WIMPy |
| 16:26.43 | WIMPy | Definite yes. |
| 16:26.51 | creativx | under which category should I find dahdi in menuselecT? |
| 16:26.54 | *** part/#asterisk sahafeez (~sahafeez@4.53.128.211) |
| 16:26.58 | devons | asterisk includes an http server and the module res_phoneprov is supposed to dynamically provide phone config files |
| 16:27.24 | creativx | there is "Channel drivers: chan_dahdi XXX".. any other places I've forgotten to look? |
| 16:27.32 | dlynes | devons, ah |
| 16:27.53 | dlynes | devons, i guess it only works for a specific brand (and possibly model) of phones? |
| 16:28.12 | devons | it should work for any that can provision via http |
| 16:28.23 | devons | asterisk comes with a sample config for polycom phones |
| 16:28.35 | dlynes | devons, ah....even if they have more than one config per device? |
| 16:29.25 | malcolmd | Pegasus_RPG: so i'm looking at the sip invite from qutecom, which says it has speex/8000 and speex16000 configured...but it's not actually sending them in the invite |
| 16:29.38 | devons | yes, the phone prov module can dynamically point to different files depending on request |
| 16:29.57 | devons | however, I have not been able to have it serve even a static file |
| 16:30.07 | dlynes | devons, ah...cool...I've seen the 'phoneprov' module....just never used it before, or knew what it was for |
| 16:30.32 | devons | see https://wiki.asterisk.org/wiki/display/AST/Phone+Provisioning+in+Asterisk |
| 16:31.01 | devons | it would make life very easy! |
| 16:31.14 | dlynes | devons, yeah...not for me |
| 16:31.28 | dlynes | devons, I typically configure multiple users per device |
| 16:31.44 | Pegasus_RPG | malcolmd: oh fantastic |
| 16:31.56 | dlynes | devons, and phoneprov is only capable of one user per device according to the wiki |
| 16:32.55 | dlynes | devons, that being said, i'm sure you could hack the code to allow it to work for multiple users per device |
| 16:33.23 | *** join/#asterisk rgsteele (~rgsteele@apo.aweber.com) |
| 16:35.36 | *** join/#asterisk TSM (~the_softw@78-105-6-158.zone3.bethere.co.uk) |
| 16:37.56 | dlynes | creativx, if you're seeing 'chan_dahdi XXX', it's because you don't have dahdi installed |
| 16:38.05 | *** join/#asterisk Andrew__M (62712e9c@gateway/web/freenode/ip.98.113.46.156) |
| 16:38.28 | creativx | dlynes: that is weird indeed |
| 16:38.40 | dlynes | creativx, install dahdi, then do a make distclean ; ./configure ; make menuselect ; make ; make install |
| 16:38.52 | creativx | dahdi_test |
| 16:38.52 | creativx | Opened pseudo dahdi interface, measuring accuracy... |
| 16:38.52 | creativx | 99.983% 99.974% 99.981% 99.979% 99.980% 99.630% |
| 16:39.02 | creativx | I think that would mean dahdi is in fact installed |
| 16:39.16 | dlynes | creativx, lsmod | grep -i dahdi |
| 16:39.28 | creativx | lsmod | grep -i dahdi |
| 16:39.28 | creativx | dahdi 228712 0 |
| 16:39.28 | creativx | crc_ccitt 2113 1 dahdi |
| 16:39.33 | creativx | sorry for pasteeeeeing |
| 16:39.56 | dlynes | creativx, you're going to be using the dahdi pseudo channel? i.e. just use dahdi for timing? |
| 16:40.06 | creativx | yes I am trying to get res_musiconhold to work |
| 16:40.09 | creativx | which needs dahdi |
| 16:40.15 | creativx | and this is an ip-only box.. so dummy timer |
| 16:40.21 | dlynes | creativx, yeah...you need dahdi for that, but not chan_dahdi |
| 16:40.35 | creativx | oh, so that is where the misunderstanding is |
| 16:40.37 | dlynes | creativx, i think....don't quote me on that |
| 16:40.48 | creativx | but then how do I get asterisk to load the dahdi module |
| 16:40.52 | creativx | if its not being built by make |
| 16:40.58 | creativx | since menuselect has disabled anything dahdi related.. heh |
| 16:40.58 | dlynes | creativx, btw...have you done a dahdicfg -vvvv |
| 16:41.13 | creativx | "0 channels to configure. |
| 16:41.34 | dlynes | creativx, one sec...lemme double check something |
| 16:41.37 | creativx | dahdi version is 2.4.0 (tools aswell) |
| 16:44.19 | creativx | could it be dahdi dependencies are missing too? |
| 16:45.12 | Andrew__M | Q: If my Asterisk is behing a DD-WRT NAT router, what are the options to use a softphone from the Internet, securely? |
| 16:45.46 | mayfield | you need to insmod the module |
| 16:45.59 | mayfield | if the module is compiled. |
| 16:47.12 | dlynes | mayfield, as you can see from his lsmod, it's already insmod'd |
| 16:47.23 | *** join/#asterisk timahvo1 (~rogue@41.223.57.73) |
| 16:47.54 | creativx | insmod is beyond my previous make experiences |
| 16:47.54 | creativx | =) |
| 16:48.50 | dlynes | creativx, when you do the 'make install', it does that for you automatically |
| 16:48.54 | mayfield | andrew,you can restrict access by ip, and password =P |
| 16:49.15 | dlynes | creativx, if it wasn't insmod'd, you wouldn't be able to modprobe it. If you couldn't modprobe it, it wouldn't show up in lsmod |
| 16:49.56 | creativx | dlynes: okay! |
| 16:50.09 | creativx | are there any other dependencies I am missing? libpri ? |
| 16:50.45 | WIMPy | libpri is optional. |
| 16:50.57 | SparFux1 | libpri rocks. |
| 16:51.01 | creativx | but a dependency for dahdi if pri is used |
| 16:51.09 | WIMPy | Does it? |
| 16:51.32 | Andrew__M | mayfield: Do you mean open the ports and rely on Asterisk security? |
| 16:51.39 | SparFux1 | I think so. It's an open source isdn stack which also supports bri and dahdi + libpri are at least kind of working here for me :-P |
| 16:51.48 | creativx | "LibPRI is a dependency for Asterisk and DAHDI if PRI signaling is used. " |
| 16:52.11 | SparFux1 | creativx: libpri also supports bri as of 1.4.12beta1 and +.. |
| 16:52.24 | WIMPy | SparFux1: I still prefer LCR so far. But both have some advantages. |
| 16:52.31 | creativx | thats fine and dandy.. but this is an IP only box |
| 16:52.47 | SparFux1 | WIMPy: lcr might be better, but some software lacks support for it. |
| 16:52.53 | creativx | so the dependency tree is looking bigger and bigger |
| 16:53.20 | creativx | cd ... |
| 16:53.29 | WIMPy | remembers. No Asterisk. |
| 16:53.40 | mayfield | andrew, no. you cna use iptables to retrict access by IP or you can generate strict passwords for each remote end point.. |
| 16:53.47 | *** join/#asterisk lanning (~lanning@208.87.233.137) |
| 16:53.50 | mayfield | andrew, look in your sip.config |
| 16:54.20 | mayfield | andrew, there are more complicated setup.s like setting up tun0's foreach endpoint |
| 16:54.35 | creativx | hell yes |
| 16:54.37 | creativx | lesson learned |
| 16:54.42 | creativx | libpri first.. then dahdi.. then asterisk |
| 16:54.51 | creativx | that was easy and obvious! |
| 16:55.31 | WIMPy | But as you don't have any isdn interfaces, you don't need libpri. |
| 16:55.36 | creativx | thats right |
| 16:55.40 | creativx | but try installing chan_dahdi without it! |
| 16:55.49 | Andrew__M | mayfield: Yes, I will look there. Thank you. |
| 16:56.04 | mayfield | andrew, good luck! |
| 16:56.12 | WIMPy | creativx: AFAIK that should work. |
| 16:56.37 | creativx | WIMPy: yes It did work, menuselect let me select chan_dahdi after libpri install.. now recompiling asterisk.. finally solved |
| 16:56.55 | WIMPy | Hmmm :-/ |
| 16:57.14 | creativx | voila.. keyword "moh" enabled |
| 16:57.24 | *** join/#asterisk moy_ (~moy@pni-63-239-17-194.prioritynetworks.net) |
| 16:57.37 | creativx | sweet.. then I am going home. |
| 16:58.39 | mayfield | nice creativx :) |
| 16:58.44 | mayfield | drive safe out there :P |
| 17:00.00 | dlynes | creativx, that doesn't make any sense, whatsoever |
| 17:00.21 | dlynes | creativx, i've got a 1.8 box here without libpri installed, and it works just fine |
| 17:01.36 | dlynes | creativx, erm rather forgot i had downgraded it to 1.6.2.15 trying to get blind transfers to work |
| 17:04.47 | dlynes | creativx, nvm...someone else had it installed on there, too |
| 17:05.12 | *** join/#asterisk OneFix_Work (~onefix@205.133.146.124) |
| 17:05.33 | *** join/#asterisk jaskew (~jdaskew@netblock-75-79-182-110.dslextreme.com) |
| 17:12.28 | *** join/#asterisk anthm (~anthm@freeswitch/developer/anthm) |
| 17:15.30 | *** join/#asterisk ickmund (~ickmund@cli-5b7ee407.bcn.adamo.es) |
| 17:18.18 | *** join/#asterisk CoffeeIV (~rgr@dsl093-217-226.aus1.dsl.speakeasy.net) |
| 17:22.56 | CoffeeIV | I have a Ubuntu system with asterisk 1.6.2.5, and I am having problems with dropped calls and bad sound on a ConfBridge call. I am seeing this in the logs: "res_timing_timerfd.c: Read error: Bad file descriptor" is there a different timing source I should use or somehting ? |
| 17:27.12 | *** join/#asterisk Ad-Hoc (~nimbus@194.219.214.114.dsl.dyn.forthnet.gr) |
| 17:28.33 | *** join/#asterisk Freeaqingme (~Freeaqing@83.160.112.249) |
| 17:29.09 | *** join/#asterisk g_r_eek (~g_r_eek@173-9-142-122-Miami.FL.hfc.comcastbusiness.net) |
| 17:31.52 | CoffeeIV | If I am running asterisk 1.6.2 on a 2.6.32 kernel (ubuntu), do I need the ztdummy module ? This is an all voip system with no hardware cards |
| 17:33.16 | dlynes | CoffeeIV, you should be using dahdi...it's the zaptel replacement |
| 17:34.03 | *** join/#asterisk KavanS (~KavanS@LINBIT/KavanS) |
| 17:34.55 | leifmadsen | CoffeeIV: and you don't need hardware to run DAHDI -- it uses the kernel for timing. You just build res_timing_dahdi in Asterisk. |
| 17:35.33 | kerframil | has 1.6 removed the requirement for conferencing and IAX in trunk mode? |
| 17:36.26 | CoffeeIV | ok, thanks guys |
| 17:39.52 | CoffeeIV | Is there documentation of what is allowed in user.conf ? I have host = dynamic, and I am getting failed lookups for "dynamic", and I am wondering if that should be "dynamic = yes" |
| 17:40.17 | *** join/#asterisk fskrotzki_ (~fskrotzki@cpe-74-74-245-250.rochester.res.rr.com) |
| 17:40.24 | *** join/#asterisk manji (~manjiki@ppp-94-65-194-51.home.otenet.gr) |
| 17:42.43 | *** join/#asterisk g_r_eek (~g_r_eek@173-9-142-122-Miami.FL.hfc.comcastbusiness.net) |
| 17:44.05 | leifmadsen | kerframil: I don't understand that question |
| 17:44.45 | leifmadsen | kerframil: I can't remember when, but I think 1.6.2 allows you to do IAX trunking with either res_timing_pthread and res_timing_timerfd which are kernel only modules |
| 17:44.52 | leifmadsen | (I don't recommended res_timing_pthread at all though) |
| 17:45.01 | leifmadsen | I still use res_timing_dahdi because it's just more stable |
| 17:45.18 | *** join/#asterisk g_r_eek (~g_r_eek@173-9-142-122-Miami.FL.hfc.comcastbusiness.net) |
| 17:45.39 | *** part/#asterisk g_r_eek (~g_r_eek@173-9-142-122-Miami.FL.hfc.comcastbusiness.net) |
| 17:48.42 | *** join/#asterisk g_r_eek (~g_r_eek@173-9-142-122-Miami.FL.hfc.comcastbusiness.net) |
| 17:48.55 | *** join/#asterisk paulc (~paulc@unaffiliated/paulc) |
| 17:49.08 | *** join/#asterisk AliRezaTaleghani (~AliRezaTa@unaffiliated/AliRezaTaleghani) |
| 17:49.22 | AliRezaTaleghani | ChannelZ: L-) |
| 17:49.45 | AliRezaTaleghani | ping |
| 17:49.53 | paulc | pong! |
| 17:50.03 | AliRezaTaleghani | wooops :) tnx |
| 17:50.11 | kerframil | leifmadsen: well, I still use 1.4 and have to load dahdi_dummy for those purposes so the question was whether it would still be necessary upon upgrading to 1.6. from what you say, I gather it's a no :) |
| 17:50.15 | AliRezaTaleghani | paulc: are u interestd on AMI? |
| 17:50.56 | paulc | AliRezaTaleghani: I do a few bits and pieces with it, sure.. but nothing major/complex |
| 17:51.22 | AliRezaTaleghani | I am looking for a way to poll a caller out from a Queue and push him, some other place, for example from another Queue |
| 17:51.38 | AliRezaTaleghani | pull* |
| 17:54.00 | AliRezaTaleghani | paulc: I mean, I want to change a Caller Place, after that Queueing him |
| 17:54.06 | AliRezaTaleghani | :-. is there any way? |
| 17:55.39 | paulc | AliRezaTaleghani: Are you saying you want to change the position of a caller who's already in a queue? I'm not sure if that can be done or not - I haven't had experience with it. I wonder if maybe you could change priority, to influence the position, maybe? |
| 17:56.10 | paulc | AliRezaTaleghani: I guess the real question is why do you want to change the caller's position? Can you provide some context/example? |
| 17:56.42 | leifmadsen | kerframil: well actually if you upgrade to the latest DAHDI there isn't even a dahdi_dummy module to load anymore. |
| 17:56.48 | leifmadsen | It's all just built into DAHDI. |
| 17:58.14 | kerframil | leifmadsen: ah, yes. for some reason that slipped my mind (probably because I set it up quite a while ago and haven't had to worry about it since). |
| 17:58.51 | kerframil | leifmadsen: I have on host that uses dahdi/wcte12xp but another which loads dahdi merely for IAX trunking |
| 17:58.55 | kerframil | one* |
| 17:59.02 | AliRezaTaleghani | paulc: yea, it's the just thing i am looking for. cos i have multiple Queues, there will be some situation that VIP customers are in Queue |
| 17:59.06 | AliRezaTaleghani | look |
| 17:59.10 | AliRezaTaleghani | for example: |
| 17:59.23 | AliRezaTaleghani | we have two major part |
| 17:59.28 | AliRezaTaleghani | Central-CS |
| 17:59.39 | AliRezaTaleghani | and Provinces-CS |
| 18:00.21 | AliRezaTaleghani | each of which have their own VIP-MICS-ECHO-ART queue |
| 18:00.27 | AliRezaTaleghani | so we have 8Q |
| 18:01.14 | *** join/#asterisk matiasjrossi (~matiasjro@host23.186-109-85.telecom.net.ar) |
| 18:01.23 | AliRezaTaleghani | there is times, that callers of VIP type are in Q (on Central Zone), but no VIP type caller remained on Provinces-VIP Queue |
| 18:01.49 | AliRezaTaleghani | so i will need to place VIPs from Central-VIP-Q into Provinces-VIP-Q |
| 18:02.44 | AliRezaTaleghani | :-/ |
| 18:04.10 | paulc | leifmadsen: something you said about DAHDI caused a ping in my brain yesterday.. if I'm running 1.6.2.x with only SIP and no hardware, do I need DAHDI for timing etc? or only if I'm doing conferencing? |
| 18:04.55 | paulc | AliRezaTaleghani: ..and separate agent groups service the Provinces queues versus the Central queues? |
| 18:06.02 | cusco | hello |
| 18:06.59 | cusco | when entering in queue, the member is Local/bla, so when t goes trough dialplan there is a dial, 20, .. so it tries for 20 seconds. But on Cli I read: Nobody picked up in 10000 ms |
| 18:07.11 | *** join/#asterisk AliRezaTaleghani (~AliRezaTa@unaffiliated/AliRezaTaleghani) |
| 18:07.13 | cusco | this is probably a queue parameter, what is it called? |
| 18:08.31 | matiasjrossi | hi. any way to set arbitrary sip_peer attributes at runtime (AMI/AGI/Command). Specifically 'qualifyfreq'. ? |
| 18:09.47 | ClintGoudie-Nice | heya guys, what's the quick way to see if mwi is working on a device in 1.8? I don't see a var/spool/asterisk/mwi dir |
| 18:11.10 | dlynes | matiasjrossi, asterisk realtime extensions do this, don't they? |
| 18:11.49 | *** join/#asterisk devons (HydraIRC@173-230-165-200.cable.teksavvy.com) |
| 18:12.23 | ClintGoudie-Nice | I've tried leaving a voicemail for this extension, but it didn't light the mwi light on this grandstream phone and I'm trying to figure out what's going on |
| 18:12.40 | *** part/#asterisk AliRezaTaleghani (~AliRezaTa@unaffiliated/AliRezaTaleghani) |
| 18:12.45 | matiasjrossi | ok. thank you dlynes. i've never used them. lets see if that works... |
| 18:14.47 | *** join/#asterisk raden_work (~jon@69-179-99-17.stat.centurytel.net) |
| 18:15.59 | dlynes | matiasjrossi, well, i don't know that it does, or not...I'm just guessing it does....if I remember correctly, it's a database-driven version of the config files |
| 18:20.17 | *** join/#asterisk angryuser_laptop (~angryuser@90-156-167-83.reverse.alphalink.fr) |
| 18:21.06 | *** join/#asterisk m_tadeu (~quassel@89.180.58.158) |
| 18:24.47 | *** join/#asterisk jaytee (~jforde051@unaffiliated/jaytee) |
| 18:27.30 | *** join/#asterisk MitchCapper (~UNIX@unaffiliated/mitchcapper) |
| 18:28.11 | *** part/#asterisk MitchCapper (~UNIX@unaffiliated/mitchcapper) |
| 18:30.11 | *** join/#asterisk DelphiWorld (~VoIpGuy@41.200.9.125) |
| 18:30.15 | *** part/#asterisk DelphiWorld (~VoIpGuy@41.200.9.125) |
| 18:35.41 | *** join/#asterisk ickmund (~ickmund@h-79-136-116-121.NA.cust.bahnhof.se) |
| 18:37.22 | *** join/#asterisk timahvo1 (~rogue@41.223.57.74) |
| 18:43.31 | *** join/#asterisk hetii (~hetii@87.99.51.172) |
| 18:43.35 | hetii | Hello :> |
| 18:44.09 | hetii | i try compile latest misdn sources under ubuntu 10.10 but got severeal compilation errors |
| 18:44.59 | hetii | so i try to update the sources to be able to compile them |
| 18:45.11 | hetii | here is a current result |
| 18:45.14 | hetii | http://pastebin.com/cAJ0sRtm |
| 18:45.54 | hetii | i stock on the last line |
| 18:46.06 | hetii | error: âstruct capi_ctrâ has no member named âctr_read_procâ |
| 18:46.16 | hetii | any idea what can i do ?:) |
| 18:54.54 | dlynes | hetii, apt-get install libcapi20-dev libpci-dev |
| 18:55.10 | hetii | ok |
| 18:55.12 | dlynes | hetii, it might be slightly different than libcapi20-dev for your particular version of ubuntu, however |
| 18:55.56 | dlynes | hetii, apt-cache search dev | grep -E "capi.*dev|pci.*dev" to see what it is for your system |
| 18:56.24 | hetii | libpci-dev - Linux PCI Utilities (development files) |
| 18:56.26 | hetii | libpciaccess-dev - Generic PCI access library for X - development files |
| 18:56.28 | hetii | capi4hylafax - Faxing over CAPI 2.0 device |
| 18:56.30 | hetii | capisuite - easy fax and voice box solution for ISDN/CAPI capable devices |
| 18:56.32 | hetii | libcapi20-dev - libraries for CAPI support |
| 18:56.36 | dlynes | hetii, use pastebin |
| 18:56.38 | hetii | ok |
| 18:56.47 | dlynes | hetii, for anything more than two lines |
| 18:57.00 | dlynes | hetii, anyways...as you can see...libpci-dev and libcapi20-dev |
| 18:57.02 | hetii | but after installing you libst still had this issue |
| 18:57.13 | hetii | should i include them somehow ? |
| 18:57.27 | dlynes | hetii, after the apt-get, you still have that issue? |
| 18:57.33 | hetii | yes |
| 18:57.52 | dlynes | hetii, actually |
| 18:58.06 | dlynes | hetii, you're compiling old code that's designed for an old kernel by the looks of it |
| 18:58.33 | hetii | this is the latest from misdn.org site |
| 18:59.57 | dlynes | hetii, maybe you're compiling new code that's designed for a newer kernel than what you've got, then? |
| 19:00.16 | leifmadsen | paulc: only conferencing |
| 19:00.17 | dlynes | hetii, this is what i'm looking at, specifically: /usr/src/mISDN-1_1_9_2/drivers/isdn/hardware/mISDN/hfc_pci.c - error: implicit declaration of function pci_find_device (change to pci_get_device) |
| 19:00.29 | hetii | Linux VOIP 2.6.35-25-server #44-Ubuntu SMP Fri Jan 21 19:09:14 UTC 2011 x86_64 GNU/Linux |
| 19:00.29 | dlynes | hetii, See the 'change to pci_get_device' comment? |
| 19:00.39 | paulc | leifmadsen: thanks - much appreciated :) |
| 19:00.45 | leifmadsen | paulc: and I think in 1.8 (maybe just trunk?) you don't even need DAHDI for conferencing (i.e. you can use res_timing_timerfd, or whatever) |
| 19:00.47 | hetii | i just wrote there what i change |
| 19:00.58 | leifmadsen | I know that was a project that was supposed to get done -- not sure if it was done yet though |
| 19:01.02 | *** join/#asterisk atan2 (~atan@unaffiliated/atan) |
| 19:01.16 | paulc | leifmadsen: it's a long list, I know how that goes :-) |
| 19:01.36 | leifmadsen | paulc: only 800+ open issues plus whatever other issues are found internally :) |
| 19:02.20 | hetii | i even compite all modules from this misdn but i suppose that i do to much mess inside because when i try to load them i got errors like |
| 19:02.30 | paulc | LOL yeah.. my current favourite/interest being http://bugs.digium.com/view.php?id=18675 ;-) |
| 19:02.39 | hetii | FATAL: Error inserting mISDN_l1 (/lib/modules/2.6.35-25-server/extra/mISDN_l1.ko): Unknown symbol in module, or unknown parameter (see dmesg) |
| 19:02.55 | dlynes | hetii, i guess you don't have any coding experience? |
| 19:03.14 | hetii | but as i said it was just test if i`m able to do it myself :> |
| 19:03.44 | hetii | i had but not exactly with C :> |
| 19:04.02 | dlynes | leifmadsen, wow...the list is bigger than it used to be, then |
| 19:04.25 | dlynes | hetii, i would suggest fixing the code up the way the warnings suggest, then |
| 19:04.42 | dlynes | hetii, it seems you have an incompatibility between mISDN code and your particular kernel version |
| 19:04.51 | hetii | indead |
| 19:05.15 | hetii | thats why i suppose that the latest sources from misdn site are not up to date :) |
| 19:05.16 | dlynes | hetii, but then again, personally |
| 19:05.36 | dlynes | hetii, I personally would never use ubuntu 10.10 for development |
| 19:05.38 | hetii | i know that is a lot of work but what i can said :) it must work :> |
| 19:05.58 | dlynes | hetii, I'd use 10.04 instead, just to make sure i have stable libraries to work with |
| 19:06.17 | leifmadsen | dlynes: ya we're getting about 10 issues filed a day or so |
| 19:06.21 | leifmadsen | some I close, others I don't |
| 19:06.44 | dlynes | leifmadsen, ah...btw...you're in Toronto now, right? |
| 19:07.43 | hetii | yep, i try to do something with it if still without success then i be forced to set server from scrath on some other system/kernel :( |
| 19:07.48 | dlynes | leifmadsen, Just curious if the snow storm is as bad there as it is here....we've got about 14" of snow, and it's still coming down |
| 19:07.55 | dlynes | leifmadsen, I'm in Hamilton |
| 19:16.13 | leifmadsen | dlynes: still coming down a bit more now, but I think you're on the border between the 20-25cm mark and our 10-15cm |
| 19:16.18 | leifmadsen | it's coming down, but I don't find it that bad |
| 19:16.28 | leifmadsen | dlynes: technically I'm in Caledon |
| 19:17.58 | *** join/#asterisk bvierra (~bvierra@route1.lax.office.netdna.com) |
| 19:18.51 | bvierra | Hey guys, We keep having calls drop, trying to see if something in the logs shows if it is our asterisk server or the trunk or the other line... You can see the ones for the call at: http://pastebin.com/QNRD8APT |
| 19:20.01 | *** join/#asterisk JamesHarrison (~jharr@hometree.mmmetrics.co.uk) |
| 19:28.08 | *** join/#asterisk zerohalo (~zerohalo@173-13-92-27-NewEngland.hfc.comcastbusiness.net) |
| 19:28.58 | *** join/#asterisk zerohalo (~zerohalo@173-13-92-27-NewEngland.hfc.comcastbusiness.net) |
| 19:31.39 | Dovid | leifmadsen: Sorry to be a pest. did you get to my ticket ? If you think it will take long I will put out a message on the biz list |
| 19:32.09 | *** join/#asterisk rrb3942 (~rbullock@208.34.105.161) |
| 19:32.40 | leifmadsen | Dovid: what do you mean "get to your ticket"? |
| 19:32.47 | leifmadsen | and which ticket are you referring to? |
| 19:33.03 | *** join/#asterisk slidesinger (~slidesing@c-68-44-99-163.hsd1.nj.comcast.net) |
| 19:33.18 | *** join/#asterisk reber (~reber@ns1.sylogix.net) |
| 19:33.35 | Dovid | leifmadsen: I thought I was pissing u off enough the last few days that you would just remember ;) https://issues.asterisk.org/view.php?id=18722 |
| 19:33.56 | leifmadsen | you will know I have looked at it when the status changes |
| 19:34.50 | Dovid | ok |
| 19:41.43 | dlynes | leifmadsen, ah...so Caledon is just south of the snow belt, then? |
| 19:42.07 | dlynes | leifmadsen, Shelburne (and I think Orangeville) are inside the snow belt |
| 19:43.54 | *** join/#asterisk vinhdizzo (~vinh@dhcp-v013-162.mobile.uci.edu) |
| 19:46.54 | dlynes | bvierra, what version of asterisk are you running? what version of dahdi? |
| 19:47.39 | bvierra | Asterisk 1.6.2.10 |
| 19:48.09 | dlynes | bvierra, and is 1.6.2.10 supported by the particular version of freepbx you're using? |
| 19:48.15 | bvierra | yes |
| 19:48.37 | jaskew | Does anyone have opinions on VoIP inbound/outbound providers :) e.g. Vitelity, CallCentric, Flowroute, IPComms, LES.net, etc.? Any one that really shines? |
| 19:48.55 | dlynes | bvierra, and is it a sip to sip call? (hard to tell with all the freepbx spam in your pastebin) |
| 19:49.03 | bvierra | sorry :) |
| 19:49.16 | dlynes | jaskew, vitelity.net's good, i've heard flowroute is good, and les.net sucks |
| 19:49.42 | bvierra | its froma sip phone to sip trunk |
| 19:49.46 | bvierra | (flowroute) |
| 19:50.00 | bvierra | jaskew, we have been happy with flowroute |
| 19:50.08 | bvierra | over 6 months now, no real issues |
| 19:50.29 | bvierra | they dont have a tech support phone number, but their help desk seems to answer < 1hr |
| 19:51.38 | jaskew | thanks - I'm using Vitelity and LES now. Both have been OK for the most part. |
| 19:54.04 | bvierra | dlynes, anything else I can give out to help? |
| 19:55.07 | *** join/#asterisk SaiSoma (~chatzilla@client105.jdcc.edu) |
| 19:56.03 | *** join/#asterisk nestAr (nester@blackbox.ninjaz.net) |
| 19:57.01 | *** join/#asterisk Deeewayne (~dwayne@68-64-220-110.static.forethought.net) |
| 19:57.01 | *** mode/#asterisk [+o Deeewayne] by ChanServ |
| 20:01.19 | jaskew | bvierra: do you know if flowroute still passes P-Asserted-Identity? |
| 20:03.06 | bvierra | no idea... how can I cehck? |
| 20:06.11 | *** join/#asterisk moy_ (~moy@pni-63-239-17-194.prioritynetworks.net) |
| 20:06.52 | *** part/#asterisk b14ck (~b14ck@cpe-72-129-70-245.socal.res.rr.com) |
| 20:07.05 | jaskew | At one time, they would send the caller ID, even if it was blocked. |
| 20:12.25 | *** join/#asterisk vinhdizzo (~vinh@dhcp-v013-162.mobile.uci.edu) |
| 20:12.36 | leifmadsen | dlynes: Caledon is north of Toronto (top of the 410) -- so I'd say it is north of the snow belt (which I consider Sarnia <--> London <--> Kitchener type area |
| 20:13.44 | *** join/#asterisk The-Kernel (~tcrowe@unaffiliated/the-kernel) |
| 20:16.05 | *** join/#asterisk Tech_Travis (~Travis_El@cpe-76-168-191-127.socal.res.rr.com) |
| 20:16.17 | The-Kernel | is there a way to force asterisk to register with the trunk? For some reason I don't see it trying |
| 20:16.43 | bvierra | jaskew, afaik they do not |
| 20:18.08 | bvierra | jaskew, actually I do believe they do |
| 20:18.17 | bvierra | just *82 and dialed |
| 20:18.23 | bvierra | still came through |
| 20:18.35 | jaytee | jaskew, according to Flowroute's FAQ page they still pass callerid via "P-Asserted-Identity", "Remote-Party-ID" or "From:" |
| 20:18.39 | bvierra | nm |
| 20:18.40 | bvierra | lol |
| 20:18.40 | jaskew | it's *67 isn't it? |
| 20:18.57 | bvierra | yea 82 unblocks |
| 20:18.58 | bvierra | lol |
| 20:19.10 | bvierra | yea they dont |
| 20:20.02 | bvierra | comes through as anonymous |
| 20:23.00 | jaskew | there was a time when it was passed anyway. very handy for some applications |
| 20:23.35 | bvierra | too bad its not :( |
| 20:26.22 | Katty | goooooooooooooood afternoon asterisk! |
| 20:26.25 | Katty | it's HUG TIME! |
| 20:26.27 | Katty | prepare yourself!!!! |
| 20:26.32 | n3hxs-wk | hugs Katty |
| 20:26.42 | fenrus | pets katty |
| 20:26.46 | n3hxs-wk | :p beat you to it. |
| 20:26.50 | *** join/#asterisk slidesinger (~slidesing@c-68-44-99-163.hsd1.nj.comcast.net) |
| 20:27.10 | Qwell | waits in line |
| 20:27.31 | n3hxs-wk | Qwell, is queued |
| 20:27.38 | Qwell | que? |
| 20:27.44 | n3hxs-wk | Si |
| 20:28.24 | jaskew | ha - your hug will be processed by the next available agent. |
| 20:30.05 | n3hxs-wk | Katty must not be in rotation to take hugs. |
| 20:30.26 | Qwell | presents his VIP pass |
| 20:31.03 | Dovid | Qwell: You guys going to ITEXPO ? |
| 20:31.29 | Qwell | Dovid: I believe our CEO is giving the keynote |
| 20:34.32 | Katty | hugs n3hxs-wk |
| 20:34.35 | Katty | hugs fenrus |
| 20:34.40 | Katty | hugs Qwell, twice. |
| 20:34.44 | *** join/#asterisk TSM (~the_softw@78-105-6-158.zone3.bethere.co.uk) |
| 20:34.49 | Qwell | taps the VIP pass |
| 20:35.03 | Katty | does anyone have alcholic drink recipes? |
| 20:35.14 | Qwell | vodka, ice |
| 20:35.25 | n3hxs-wk | Tequila + one ice cube. |
| 20:35.27 | *** join/#asterisk slidesinger (~slidesing@c-68-44-99-163.hsd1.nj.comcast.net) |
| 20:35.38 | n3hxs-wk | the ice cube is outside the glass. |
| 20:35.39 | Qwell | rum, glass |
| 20:36.01 | carrar | whisky, ice |
| 20:36.05 | carrar | glass optional |
| 20:36.26 | fenrus | noilly prat and tanqueray |
| 20:36.37 | fenrus | why ruin the whiskey with ice? |
| 20:36.54 | carrar | we'll it's all optional |
| 20:37.11 | Qwell | the whiskey isnt |
| 20:37.14 | frigidzephyr | use whiskey stones |
| 20:37.16 | *** join/#asterisk niekie (quasselcor@CAcert/Assurer/niekie) |
| 20:37.33 | *** join/#asterisk darkskiez (~mhb@darkskiez.ipv6.darkskiez.co.uk) |
| 20:37.42 | frigidzephyr | http://www.amazon.com/Rocks-Whiskey-Stones-Set/dp/B002GZX2DE |
| 20:37.43 | carrar | could just have ice, but won't get drunk very fast |
| 20:37.45 | bvierra | Katty, Kahlua, Amaretto, Bailys (1/3 or each) in a shot glass. Drop it into a Rum and Coke (about the same size you would for a jager bomb) |
| 20:37.50 | bvierra | tasts like chocolate milk |
| 20:37.54 | bvierra | brb |
| 20:38.06 | *** join/#asterisk ickmund (~ickmund@cli-5b7ee407.bcn.adamo.es) |
| 20:38.35 | fenrus | frigidzephyr, whiskey should not be chilled when served. |
| 20:39.01 | frigidzephyr | unless... you prefer it chilled |
| 20:39.14 | fenrus | it ruins the taste of it |
| 20:39.16 | fenrus | :) |
| 20:39.20 | fenrus | only americans do it like that |
| 20:39.31 | ClintGoudie-Nice | well and the french |
| 20:39.58 | Dovid | Qwell: Too many flight cancelations for us to go |
| 20:40.01 | Dovid | I hate the snow |
| 20:40.21 | frigidzephyr | bah, i drink scotch neat, but i like Tennessee whiskey a little chilled sometimes |
| 20:41.14 | jdoe | "ruins the taste of it" |
| 20:41.17 | *** join/#asterisk bjhaid (~abejide@41.206.12.12.vgccl.net) |
| 20:41.24 | jdoe | yeah, who'd want to ruin those pristine hints of Scottish Swamp? ;) |
| 20:42.09 | *** join/#asterisk lfod- (~email@unaffiliated/lfod-) |
| 20:42.58 | bjhaid | I want to dial an extension and once the extension answers the call, i want to playback a sound file to the extension immediately, how can I get this done. |
| 20:44.22 | sysreq | bjhaid: use Dial()'s A(x) option |
| 20:44.44 | fenrus | jdoe, i guess one of my favourites are ardbeg suprnova.. would not have anything in it, except 1-2 drops of water.. |
| 20:44.52 | bjhaid | sysreq: can you please show a sample syntax? |
| 20:45.14 | sysreq | bjhaid: Dial(SIP/blah,,A(file)) |
| 20:46.27 | *** join/#asterisk alphawave (~aw@unaffiliated/alphawave) |
| 20:46.39 | sysreq | bjhaid: from a 'core show application dial'; A(x): Play an announcement to the called party, where <x> is the prompt to be played |
| 20:47.03 | *** join/#asterisk CoffeeIV (~rgr@dsl093-217-226.aus1.dsl.speakeasy.net) |
| 20:47.09 | bjhaid | sysreq: thanks a million |
| 20:47.13 | sysreq | np |
| 20:48.22 | bjhaid | sysreq: can i write the dialplan to playback the file to multiple extensions simultaneously? |
| 20:50.15 | *** join/#asterisk chilicuil (~chilicuil@unaffiliated/chilicuil) |
| 20:50.51 | Katty | Qwell: we decided on making Bob Marley's |
| 20:51.08 | Katty | Qwell: and whatever that bailey's + butterscotch schnapps stuff is called |
| 20:53.09 | Qwell | Katty: on a weekday? |
| 20:53.26 | Katty | no sat night. it's my best friends bday |
| 20:53.32 | Qwell | oic |
| 20:53.38 | Katty | yeah we are messing her up good lol |
| 20:53.53 | Katty | let's hope she doesn't fall asleep in my bath tub again :/ |
| 20:54.13 | *** join/#asterisk matiasjrossi (~matiasjro@host23.186-109-85.telecom.net.ar) |
| 20:54.36 | *** join/#asterisk micols (~mio@rlogin.dk) |
| 20:58.16 | *** join/#asterisk TimeRider (~steve@188-220-33-123.zone11.bethere.co.uk) |
| 20:58.49 | sysreq | bjhaid: you might want to look into call files for that.. http://www.voip-info.org/wiki/view/Asterisk+auto-dial+out |
| 20:59.11 | bjhaid | sysreq: you are the bom, thanks alot |
| 21:02.19 | *** join/#asterisk bbryant (~brett@c-76-26-221-79.hsd1.sc.comcast.net) |
| 21:14.44 | *** join/#asterisk TimeRider (~steve@188-220-33-123.zone11.bethere.co.uk) |
| 21:14.50 | *** join/#asterisk shriven (~shriven@bouncer.crosscomm.net) |
| 21:15.39 | *** join/#asterisk sahafeez (~sahafeez@4.53.128.211) |
| 21:15.59 | shriven | Hello. I am trying to figure out the logic so that when someone dials in a specific DID I will have them enter a code and based on that put them in a specific conference room, anyone have hints on what dialplan cmds I should be using for this? |
| 21:16.37 | Dovid | simple |
| 21:18.42 | shriven | yea? |
| 21:20.56 | Dovid | shriven: http://pastebin.com/bxTwNWTi |
| 21:21.39 | shriven | yea that looks like it would do what I want |
| 21:21.55 | shriven | what is this part? Background(enter-conf-room) |
| 21:22.26 | Dovid | u need to have a sound file telling em to enter the room they want |
| 21:22.29 | Dovid | or enter a code |
| 21:22.46 | shriven | ahhh ok |
| 21:22.52 | shriven | thats the only part I was missing |
| 21:23.13 | shriven | would it be possible to use authenticate instead of WaitExten and do basically the same thing? |
| 21:23.26 | Qwell | exten => 5551212,1,Meetme(,d) |
| 21:23.29 | Qwell | simple |
| 21:24.00 | Dovid | Qwell: Thanks. a bit on the tired side |
| 21:24.32 | Dovid | shriven: You can use authenticate but then how will you know what room to send them to ? |
| 21:24.57 | shriven | thats what I'm asking, if there would be a way to get the digits they entered, sounds like not |
| 21:25.36 | shriven | so MeetMe, I'm reading the docs, its not very clear to me, once they are prompted for a number they will be sent to the conference they entered? |
| 21:26.07 | shriven | ahh hmm that dynamically creates the conference |
| 21:26.37 | shriven | so I could do something like have a authenticate at the beginning then just let the user dynamically create the conference |
| 21:26.44 | shriven | I think that will work for me |
| 21:26.53 | shriven | thanks Qwell and Dovid! |
| 21:27.18 | Dovid | shriven: You can also use agi's with php and perl and work custom magic there |
| 21:27.19 | Dovid | np |
| 21:28.11 | shriven | Oh one other question.... This MeetMe will it wok with the software conference bridge? I don't have any hardware for timing. |
| 21:28.28 | Katty | must call telco :< |
| 21:28.29 | Katty | cries. |
| 21:28.39 | Qwell | You don't need hardware (and it isn't timing, it's mixing). Just install DAHDI |
| 21:29.03 | shriven | ok thanks. Its been a while since I dabbled with all this, its all a bit hazy. : ( |
| 21:31.42 | n3hxs-wk | Katty, you know their answer... it is your equipment. |
| 21:31.48 | Katty | nods sadly |
| 21:31.55 | *** join/#asterisk Kyosh (~whoa@pool-74-108-17-185.nycmny.fios.verizon.net) |
| 21:32.43 | raden_work | hugs Katty |
| 21:33.17 | raden_work | whats not working Katty ? |
| 21:35.12 | *** join/#asterisk GTXComm (~John@72.128.62.30) |
| 21:35.39 | Katty | outbound fax. |
| 21:35.51 | Katty | pots lines. |
| 21:36.00 | raden_work | Its the snow storm :P |
| 21:36.07 | Katty | wouldn't surprise me ;) |
| 21:36.18 | raden_work | I seriously would not doubt it one bit |
| 21:37.33 | shriven | Qwell: ok so I don't understand I think. I setup the meetme and that works, then I get the "not a valid conference number" message, which I gather is because I don't have any conference mixing abilities.... But the ConfBridge command works just fine for me, is there a way to make meetme use that? |
| 21:37.55 | Qwell | no |
| 21:38.14 | Qwell | install DAHDI, reconfigure/install asterisk |
| 21:39.11 | shriven | I had originally started using ConfBridge because I was under the impression that with dahdi you could not do all software mixing, has that changed, or am I just wrong? |
| 21:41.27 | *** part/#asterisk diemos (~root@173-13-138-49-sfba.hfc.comcastbusiness.net) |
| 21:45.59 | *** part/#asterisk wesphillips (~wphillips@64-19-240-7.caprock.net) |
| 21:46.29 | *** join/#asterisk Guest77010 (~Freeaqing@2001:980:45b3:1:216:3eff:fe00:5) |
| 21:46.44 | Qwell | you are wrong |
| 21:47.53 | shriven | heh |
| 21:47.56 | shriven | ok |
| 21:47.58 | shriven | thanks |
| 21:48.23 | *** join/#asterisk tzafrir_laptop (~tzafrir@212.179.75.202) |
| 21:56.25 | *** join/#asterisk Kyosh (whoa@pool-74-108-17-185.nycmny.fios.verizon.net) |
| 21:57.35 | Kyosh | is there a way in a sip.conf for a specific trunk to specify rather than host=IP_Address to do a host=IP_Network/CIDR ? |
| 21:58.18 | WIMPy | no |
| 21:58.22 | Kyosh | dag nabbit |
| 21:58.24 | jaytee | I've only ever seen IP address or dynamic |
| 21:58.28 | Qwell | use dynamic |
| 21:58.30 | WIMPy | Only for permit |
| 21:58.34 | Kyosh | so i have to have multiple host lines? |
| 21:58.39 | Qwell | no |
| 21:58.44 | Kyosh | qwell, dynamic is not possible from my provider |
| 21:58.55 | jaytee | get a new provider? |
| 21:59.03 | WIMPy | You can't have multiple host lines, either. |
| 21:59.17 | Kyosh | actually its more of a peer and i cant because theyre required |
| 21:59.42 | WIMPy | also had to define 8 peers for one provider. |
| 21:59.44 | Kyosh | wimpy, well i wasnt gonna put in multiple host lines since im running in realtime and there are actually no lines |
| 21:59.49 | Kyosh | 8 peers? |
| 21:59.52 | Kyosh | try 300 IP's |
| 22:00.04 | Kyosh | they have a /23 |
| 22:00.29 | Kyosh | oh well, time to write a script to import into the database |
| 22:00.32 | Qwell | Are they not using SRV? Get a new provider, they are terrible. |
| 22:00.35 | WIMPy | And they use them all for SIP? |
| 22:00.36 | Kyosh | thanks guys |
| 22:03.52 | *** part/#asterisk matiasjrossi (~matiasjro@host23.186-109-85.telecom.net.ar) |
| 22:08.43 | *** join/#asterisk moy_ (~moy@pni-63-239-17-194.prioritynetworks.net) |
| 22:14.44 | *** join/#asterisk joobie (~joobie@mx01.anric.com.au) |
| 22:19.54 | *** join/#asterisk f2Knight (~ben@c-71-236-165-148.hsd1.or.comcast.net) |
| 22:20.16 | *** join/#asterisk awclin (~alinford@pha75-1-87-91-238-195.dsl.club-internet.fr) |
| 22:23.20 | f2Knight | Q: Asterisk 1.8 SVN, How do I update the Version Information when building from SVN? Meaning I do not want to see the SVN information, I just want to make it 1.8.xxx SVN . |
| 22:24.44 | f2Knight | Q: Anyone using 1.8 in production? I am thinking of upgrading my 1.4 server to 1.8.x curious of others experiences. |
| 22:27.09 | *** join/#asterisk csnook (~chris@c-76-19-64-161.hsd1.ma.comcast.net) |
| 22:27.27 | *** join/#asterisk Tech_Travis (~Travis_El@cpe-76-168-191-127.socal.res.rr.com) |
| 22:28.12 | *** join/#asterisk high-rez (~gus@2001:470:8115::2) |
| 22:28.46 | high-rez | Is it possible to do a raw dump on a dahdi interface to see the bits floowing across it? E.g. I'm talking about a T1/E1 interface - really the layer 2 stuff |
| 22:47.27 | high-rez | Maybe I should rephrase. What I'm looking for is something like tcpdump, but instead of for ethernet interfaces for T1 interfaces (specifically my digium T1 card). I'm not running IP over this, and don't want to debug ppp or ip - i want to debug what's being sent across the d channel :) |
| 22:48.04 | WIMPy | pri set debug |
| 22:50.46 | high-rez | WIMPy: Any way to do it outside of asterisk ? |
| 22:51.04 | WIMPy | use the file option. |
| 22:51.47 | WIMPy | And if you don't want to clutter up your CLI, I put up two patches on mantis that allow you more control over the debug output. |
| 22:52.42 | WIMPy | 18528 and 18529. |
| 23:00.09 | WIMPy | high-rez: Comments to the patch would be very welcome. |
| 23:00.52 | *** join/#asterisk hetii (~hetii@87.99.51.172) |
| 23:01.20 | *** part/#asterisk hetii (~hetii@87.99.51.172) |
| 23:13.43 | *** join/#asterisk manji (~manjiki@ppp-94-65-208-18.home.otenet.gr) |
| 23:16.50 | *** join/#asterisk JAMMAN2110 (~JAMMAN211@unaffiliated/jamman2110) |
| 23:17.04 | Tozz_ | f2Knight: I would not recommend upgrading from 1.4 to 1.8 on a production machine as 1.8 is not completely config compatible with 1.4 |
| 23:17.25 | Tozz_ | so you need to test out your config first on another machine |
| 23:17.36 | *** join/#asterisk timahvo1 (~rogue@41.223.57.72) |
| 23:47.07 | leifmadsen | Tozz_: that is always my recommendation, regardless of the version upgraded ;) |
| 23:47.27 | f2Knight | Tozz_, I am testing on another system already, we run highly customized config files that I am modifying to use a LUA and realtime DB features, Sofar its working pretty well. LUA w/ MySQL / ODBC support is a little heavy to get working i thought though. |
| 23:49.38 | f2Knight | Q: anyone know how to store X-Tags to the CDR Record? I would like to store SipAddHeader(X-Tag: CUST_ID) in a way that I can retrieve it later. Mostly because one of my sip trunks supports it and I use it to identify clients, but would like for it to also record in my asterisk logs. just not sure where or what way to store it. |
| 23:51.16 | Tozz_ | i believe there was a column in the CDR log to store additional data |
| 23:51.17 | Tozz_ | 'userfield' |
| 23:51.47 | leifmadsen | if you're using cdr_adaptive_odbc -- then you just create a new field and put whatever you want in it :) |
| 23:52.11 | leifmadsen | Just create a column called X-Tag and store whatever you want in it. |
| 23:52.37 | leifmadsen | Set(CDR(X-Tag)=${SIP_HEADER(X-Tag)}) (or however the formatting for it would go) |