IRC log for #asterisk on 20120107

`00:03.40`	`hardwire`	`to the source code!`
`00:04.20`	`hardwire`	`60 seconds worth give or take 4.99 seconds.`
`00:19.21`	`*** join/#asterisk LemensTS (~matthew@adsl-70-238-150-222.dsl.stlsmo.sbcglobal.net)`
`00:20.20`	`LemensTS`	`if you call a business and get an ivr, and want you to hit #, asterisk trys to transfer you. Do you guys usually change blindxfer to something else?`
`00:22.57`	`SeRi`	`p3nguin: you around?`
`00:22.58`	`WIMPy`	`Maybe you should check your dial options.`
`00:27.11`	`LemensTS`	`WIMPy: ah my tT and my dial out eh`
`00:28.41`	`LemensTS`	`If im calling out to a business, I will just want 't' in my dial command than right?`
`00:28.52`	`LemensTS`	`I mean T`
`00:30.12`	`WIMPy`	`You should try to avoid them if possible. And it is generally unlikely that you want to allow both sides to do transfers.`
`00:32.05`	`LemensTS`	`WIMPy: can you still do transfers without them being set in the DIAL cmd?`
`00:34.18`	`SeRi`	`p3nguin: your options are for IAX2?`
`00:47.51`	`WIMPy`	`LemensTS: A transfer key on your phone is always preferrable.`
`00:57.43`	`hardwire`	`kisses ajam right on the lips`
`01:19.43`	`SeRi`	`p3nguin: is not working`
`01:27.51`	`carrar`	`fix it`
`01:37.56`	`SeRi`	`so you are now p3nguin? :)`
`01:49.53`	`*** join/#asterisk celord (~cesar@celord.ice.co.cr)`
`01:55.16`	`*** join/#asterisk jmordica_mac (~jmordica_@c-76-123-162-158.hsd1.ms.comcast.net)`
`01:55.39`	`jmordica_mac`	`I need to get a sip capture on a call. I know asterisk -rrrrrv but it's not giving me enough info`
`01:55.52`	`jmordica_mac`	`I guess I need like verbose 7?`
`01:58.29`	`jmordica_mac`	`I want to get all sip messages`
`01:58.37`	`jmordica_mac`	`which verbose do i use?`
`02:03.54`	`p3nguin`	`seri: Am I what?`
`02:03.59`	`tzanger`	`hey.. does anyone have ready access to asterisk and a pri that coudl grab a pri intense log of a call set up for me?`
`02:04.20`	`tzanger`	`I'm debugging something on a new system being designed and the switch doesn't like asterisk's setup message, claiming that it's missing a critical IE`
`02:04.41`	`tzanger`	`there is some suggestion that asterisk should be identifying the bearer channel, but I was thinking that the switch would tell us which to use`
`02:10.34`	`p3nguin`	`jmordica_mac: Connect to asterisk CLI with "asterisk -r"`
`02:11.32`	`jmordica_mac`	`done`
`02:11.38`	`p3nguin`	`jmordica_mac: Then, if you want to turn up core verbose, set it to whatever you want, but there's not much reason to go above 3 for most things. But core verbose has nothing to do with SIP. If you want to see SIP traffic, "sip set debug on".`
`02:12.12`	`jmordica_mac`	`perfect`
`02:12.15`	`jmordica_mac`	`i got what i need`
`02:12.16`	`jmordica_mac`	`thanks`
`02:12.26`	`p3nguin`	`sip set debug off to disable it.`
`02:13.26`	`carrar`	`no never turn it off`
`02:13.28`	`carrar`	`watch it`
`02:13.34`	`carrar`	`F O R E V E R`
`02:14.12`	`SeRi`	`p3nguin: no. carrar told me to fix it so I ask if he was p3nguin :P`
`02:14.27`	`carrar`	`I was`
`02:14.29`	`SeRi`	`p3nguin: I cant get the systems to se each other over IAX2`
`02:14.30`	`carrar`	`not now however`
`02:14.35`	`SeRi`	`lol`
`02:14.55`	`p3nguin`	`seri: Did you review my SIP-to-SIP configuration and translate it to IAX2 configuration?`
`02:15.00`	`SeRi`	`yes`
`02:15.39`	`p3nguin`	`Are you going to be registering one side to the other, or just using static host names?`
`02:15.50`	`SeRi`	`registering`
`02:15.54`	`SeRi`	`here is what I have`
`02:16.31`	`p3nguin`	`By the way, I didn't find my punch-down tool at that place.`
`02:16.48`	`carrar`	`no worries`
`02:16.50`	`carrar`	`I got on`
`02:16.51`	`carrar`	`one`
`02:17.17`	`p3nguin`	`Anyone know if a T1 circuit uses all four pairs between the smart jack and the WIC in the router?`
`02:17.20`	`carrar`	`I still have the little red plastic tip covers for the punch`
`02:17.34`	`p3nguin`	`Mine has the cover, too, but I lost the damn tool.`
`02:17.40`	`carrar`	`T1's use 2 pairs`
`02:17.48`	`carrar`	`pings 1,2,4,5`
`02:17.50`	`carrar`	`pins`
`02:18.03`	`p3nguin`	`I know there is only one pair going to the smart jack on the telco side.`
`02:19.01`	`p3nguin`	`So I can safely use the brown/white pair for something else? Whoever punched the T1 modular jack punched all the pairs, so I wasn't sure if that meant they were all needed or not.`
`02:19.34`	`p3nguin`	`If I would have done it, I would have checked my documentation and punched only what was needed, leaving spare pairs wound up inside the jack housing.`
`02:19.35`	`carrar`	`http://www.osburn.com/~osburn/rs232/`
`02:19.50`	`carrar`	`see bottom`
`02:20.36`	`p3nguin`	`Okay, so wait a second...`
`02:20.42`	`carrar`	`done`
`02:20.51`	`p3nguin`	`The cable from the smart jack to the router is a standard Ethernet cable?`
`02:21.03`	`carrar`	`It's a Rj45`
`02:21.17`	`p3nguin`	`I understand what type of jack it is.`
`02:21.23`	`p3nguin`	`But that doesn't have any bearing on what wires are used.`
`02:21.30`	`p3nguin`	`It could use a single pair or all four.`
`02:21.43`	`p3nguin`	`I just don't know what wires are used between a smart jack and a router.`
`02:21.44`	`carrar`	`You can just use a typicaly ethernet cat5 cable yes`
`02:21.49`	`*** join/#asterisk sarthor (~sarthor@unaffiliated/sarthor)`
`02:21.57`	`carrar`	`use a colid copper one for better results`
`02:22.09`	`carrar`	`from the NIU to your WIC`
`02:22.16`	`carrar`	`straight through cat5 cable will work`
`02:22.43`	`carrar`	`colid=solid`
`02:23.17`	`p3nguin`	`Okay, so I'll pull off the blue pair and use it for the phone line.`
`02:23.27`	`p3nguin`	`That'll save me having to pull another cable.`
`02:23.32`	`carrar`	`well`
`02:23.33`	`carrar`	`no`
`02:23.36`	`carrar`	`follow th chart`
`02:23.48`	`sarthor`	`Hi, I have installed " Asterisk 1.8.8.0-1digium1~natty, Copyright (C) 1999" is there any web based interface application if I want to browse / manage / extension with mouse clicks?`
`02:23.55`	`carrar`	`The blue and orange pairs are used for a T1`
`02:24.04`	`carrar`	`if you are wirring it correctly`
`02:24.19`	`carrar`	`you can then use the green and brown for another T1`
`02:24.29`	`p3nguin`	`In a regular Ethernet cabling, such as from my switch to my phone, the blue and brown pairs are dead.`
`02:24.34`	`carrar`	`however be aware a T1 might get or cause interferance`
`02:24.50`	`carrar`	`better to use a dedicated cable if you can`
`02:25.54`	`carrar`	`T1 pin outs are different then ethernet pin outs`
`02:26.30`	`carrar`	`also note gige uses 4 pairs`
`02:26.59`	`SeRi`	`p3nguin: http://pastebin.com/JcvV1hKG`
`02:27.51`	`SeRi`	`p3nguin: Thats my side to him`
`02:28.01`	`*** join/#asterisk luckman212_phone (~luckman21@pool-108-41-8-176.nycmny.fios.verizon.net)`
`02:28.42`	`p3nguin`	`Okay, your name is houston, so you are registering as houston to his side...`
`02:28.46`	`luckman212_phone`	`uhm am i the only one having blind xfer problems with 1.8.9.0-rc1`
`02:28.51`	`p3nguin`	`There's no nat setting in iax.conf, by the way.`
`02:29.08`	`SeRi`	`ok`
`02:29.24`	`SeRi`	`that shouldnt prevent them from connecting though`
`02:29.38`	`p3nguin`	`No, it won't.`
`02:30.08`	`p3nguin`	`I would also think your context would be from puerto rico, since the calls will be coming from PR.`
`02:30.59`	`SeRi`	`yea thatw as a small typo I for got to change but yes thats the intention`
`02:31.04`	`p3nguin`	`You don't have a host for the puertorico peer.`
`02:31.10`	`p3nguin`	`Is his system going to register to you?`
`02:31.14`	`SeRi`	`yes`
`02:31.22`	`p3nguin`	`Then you need host=dynamic`
`02:31.47`	`p3nguin`	`So both sides will have host=dynamic in the peer entries, and both sides will have a register statement.`
`02:32.34`	`SeRi`	`got it`
`02:33.05`	`p3nguin`	`Once you save those changes and reload your iax2 on each side, check the registry of both.`
`02:33.59`	`SeRi`	`they are both seating on "Request Sent"`
`02:34.31`	`p3nguin`	`Did you entire your opened or forwarded UDP 4569 correctly on both ends?`
`02:34.38`	`p3nguin`	`entire? ensure`
`02:34.42`	`p3nguin`	`did you ensure`
`02:34.44`	`p3nguin`	`weird`
`02:34.50`	`SeRi`	`yes.`
`02:35.00`	`p3nguin`	`is messed up today.`
`02:35.02`	`SeRi`	`one question`
`02:35.54`	`SeRi`	`can multiple iax2 registry use the same port?`
`02:35.55`	`luckman212_phone`	`guys is anybody in here running 1.8.9`
`02:36.13`	`sarthor`	`Hi, I have installed " Asterisk 1.8.8.0-1digium1~natty, Copyright (C) 1999" is there any web based interface application if I want to browse / manage / extension with mouse clicks?`
`02:36.23`	`SeRi`	`hes side is regsiterd to voip.ms just fine. but cant seem to get out to me at all.`
`02:36.31`	`p3nguin`	`IAX2 only uses one port. You are not limited to a single "connection" on it.`
`02:36.33`	`SeRi`	`he does not even pass threw my firewall :/`
`02:37.26`	`p3nguin`	`Perhaps the DNS is bad. Go on the asterisk box and check your host name with ping, dig, host, or nslookup.`
`02:37.50`	`p3nguin`	`Check his DNS on your box and your DNS on his.`
`02:38.13`	`SeRi`	`I did. all is good`
`02:38.34`	`p3nguin`	`Let's convert it to static hosts without registration, then.`
`02:39.02`	`p3nguin`	`Comment out the registers, and change host from dynamic to the other side's actual fqdn or address.`
`02:41.25`	`SeRi`	`ok`
`02:42.52`	`sarthor`	`Hi, I have installed " Asterisk 1.8.8.0-1digium1~natty, Copyright (C) 1999" is there any web based interface application if I want to browse / manage / extension with mouse clicks?`
`02:43.13`	`carrar`	`~book`
`02:43.13`	`infobot`	`Asterisk: The Definitive Guide, 3rd Edition (ISBN 0-596-51734-3) available at http://oreilly.com/catalog/9780596517342 - Asterisk: The Definitive Guide is released under a Creative Commons License (http://creativecommons.org/licenses/by-nc-nd/3.0/us/) and is available for reading online at http://www.asteriskdocs.org/ or see ~buybook`
`02:43.34`	`carrar`	`sarthor, please read`
`02:44.37`	`sarthor`	`carrar: I am reading, and web says about freepbx, but I want to install asterisk on my preinstalled pc.`
`02:44.57`	`p3nguin`	`~freepbx`
`02:44.57`	`infobot`	`[~freepbx] FreePBX is unable to be supported here. It is made up of complex dialplans and scripts which can't be easily supported by people who aren't deeply involved. Try joining #freepbx and asking there`
`02:45.02`	`sarthor`	`carrar: and freepbx have to reformat my pc, that is the whole distro.`
`02:45.11`	`p3nguin`	`wrong`
`02:45.17`	`p3nguin`	`FreePBX is just an application.`
`02:45.36`	`p3nguin`	`Just like installing Firefox, you can install FreePBX.`
`02:45.46`	`p3nguin`	`But we can't help you do it.`
`02:45.58`	`sarthor`	`carrar: and freepbx have to reformat my pc, that is the whole ---ISO--- Sorry`
`02:46.10`	`sarthor`	`p3nguin: sorry ISO`
`02:46.17`	`p3nguin`	`wrong`
`02:46.25`	`p3nguin`	`wrong wrong wrong`
`02:46.30`	`carrar`	`x2`
`02:46.58`	`p3nguin`	`wrong^2`
`02:47.15`	`carrar`	`sarthor, look at the book`
`02:47.23`	`carrar`	`then proceed`
`02:47.35`	`carrar`	`forget freebpx`
`02:47.43`	`sarthor`	`p3nguin: I do not like to stick with that "No I am right,". I am here to know. YOu are right, but i just saw that, have to download the whole ISO and write on the CD and then install.`
`02:48.02`	`p3nguin`	`I'll say it again...`
`02:48.21`	`p3nguin`	`FreePBX is an application which you install like any other application.`
`02:48.31`	`p3nguin`	`It has NOTHING to do with CDs.`
`02:48.37`	`p3nguin`	`Nothing to do with ISO.`
`02:48.45`	`p3nguin`	`It is just an app.`
`02:49.09`	`p3nguin`	`You obviously already have an OS installed.`
`02:49.19`	`p3nguin`	`Install FreePBX. Have a ball.`
`02:49.45`	`sarthor`	`p3nguin: carrar there website says "The easiest way to install FreePBX is to download this small "net installer" ISO, burn it to a CD,". I just want to use asterisk, not the freePBX, but i want some web interface for Asterisk.`
`02:50.05`	`p3nguin`	`Do you want some random OS, or do you want FreePBX?`
`02:50.12`	`p3nguin`	`Your choice.`
`02:50.40`	`sarthor`	`I am want Asterisk to install on my ubuntu-server`
`02:50.40`	`p3nguin`	`If you want to use your existing OS, install freepbx on it and have a day.`
`02:51.07`	`p3nguin`	`If you want to change your OS, get AsteriskNOW CD ISO image and install it using the FreePBX option.`
`02:51.39`	`sarthor`	`p3nguin: and that is already installed. and i created 2 extentions. and i can login, but I am here because i want to web interface for this. and I am just a learner`
`02:52.05`	`p3nguin`	`I won't say it again after this. Install FreePBX and go use it.`
`02:54.45`	`sarthor`	`p3nguin: English is not my native language, when you posted messanges, that time i was writing. OK. i got what you said. but, Still, is this not possible to use any web interface for asterisk 1.8.8 ?`
`02:55.01`	`sarthor`	`massages *`
`02:55.18`	`p3nguin`	`I guess I'll try a different approach...`
`02:55.18`	`p3nguin`	`No. It is not possible.`
`02:56.05`	`sarthor`	`p3nguin: OK. I am not good in English. Now i understand, that it is not possible, Thank you`
`02:56.52`	`p3nguin`	`must remember this technique in the future.`
`02:58.19`	`*** join/#asterisk Kobaz (~kobaz@its.kobaz.net)`
`03:01.50`	`jmordica_mac`	`Does asterisk send a ring back before early media?`
`03:02.10`	`jmordica_mac`	`so a caller picks up and dials a number, hears a ring and possibly a busy signal right after?`
`03:02.24`	`p3nguin`	`If you're doing it wrong, it could.`
`03:02.36`	`p3nguin`	`Take out any 'r' Dial option you're using.`
`03:03.15`	`jmordica_mac`	`just trying to figure out why dialing outbound with asterisk is much faster than freeswitch`
`03:03.37`	`jmordica_mac`	`same terminating carrier and same sip device and same telephone number being dialed`
`03:03.53`	`p3nguin`	`I wouldn't have any idea about that.`
`03:05.29`	`p3nguin`	`What I'd like to know is why I can't get an ssh socks proxy to work for my browser. I've done it plenty of times before, but this time it doesn't work. I use ssh -D3128 server.whatever, then in my browser I set socks5 proxy to localhost 3128.`
`03:05.47`	`jmordica_mac`	`got ya. what about on inbound calling. don't hear a ring back until after sip device rings`
`03:05.48`	`p3nguin`	`But the connection to the web site always times out.`
`03:05.55`	`jmordica_mac`	`about 1 second after sip device rings`
`03:06.35`	`p3nguin`	`That sounds typical. You could provide Ringing() or Progress() in your dialplan right off and see if it makes any difference.`
`03:07.11`	`jmordica_mac`	`it's not by default?`
`03:07.19`	`p3nguin`	`There is no default dial plan.`
`03:07.40`	`p3nguin`	`It will have whatever you have written in it.`
`03:08.00`	`jmordica_mac`	`i see. fpbx hehe`
`03:08.08`	`p3nguin`	`~freepbx`
`03:08.09`	`infobot`	`[~freepbx] FreePBX is unable to be supported here. It is made up of complex dialplans and scripts which can't be easily supported by people who aren't deeply involved. Try joining #freepbx and asking there`
`03:08.29`	`p3nguin`	`Just like we don't do Windows, we don't do FreePBX.`
`03:09.10`	`jmordica_mac`	`thanks`
`03:10.26`	`*** join/#asterisk luckman212_phone (~luckman21@pool-108-41-8-176.nycmny.fios.verizon.net)`
`03:22.15`	`KNERD`	`~burn freepbx`
`03:22.15`	`infobot`	`ACTION pours gasoline all over freepbx, ignites the fire, and then enjoys some toasty marshmallows with the glorious blaze`
`03:22.44`	`luckman212_phone`	`mmm toasty`
`03:23.59`	`X-Rob`	`Hah`
`03:24.11`	`X-Rob`	`I wrote that disclamier what, 4 years ago now?`
`03:24.15`	`X-Rob`	`and it hasn't been changed`
`03:29.21`	`*** part/#asterisk jmordica_mac (~jmordica_@c-76-123-162-158.hsd1.ms.comcast.net)`
`03:30.17`	`SeRi`	`p3nguin: we are connected`
`03:30.26`	`SeRi`	`now I need to create the dial plan`
`03:31.08`	`*** join/#asterisk GGD (~deberle@pool-173-72-204-39.clppva.fios.verizon.net)`
`03:32.24`	`luckman212_phone`	`SeRi: what was the problem`
`03:32.38`	`SeRi`	`hes firewall was blocking it`
`03:35.33`	`p3nguin`	`seri: Are you back to registrations?`
`03:36.54`	`SeRi`	`p3nguin: no`
`03:36.56`	`SeRi`	`static`
`03:41.25`	`SeRi`	`p3nguin: you avail?`
`03:42.55`	`*** join/#asterisk resist0r (~resist0r@69.31.131.51)`
`03:43.12`	`p3nguin`	`Instead of asking that all the time, maybe you could just say what it is that you want to say.`
`03:43.45`	`SeRi`	`I dont like to bother`
`03:43.49`	`SeRi`	`Thats why I ask`
`03:45.09`	`p3nguin`	`I sure wish I knew what is the problem with my ssh proxy.`
`03:46.35`	`resist0r`	`If two extensions are both in the from-internal context and when tested with a softphone register successfully but can not connect to each other and get a 404 not found error what the heck? both are set to friend and nat=yes -- any ideas cuz it should be simple and I have wasted so much time on just this`
`03:47.28`	`SeRi`	`p3nguin: I just make a regular dial plan context and it shold work?`
`03:49.52`	`p3nguin`	`You don't even need a new context. Just create a relevant extension with the correct Dial().`
`03:56.09`	`ChannelZ`	`resist0r: need to see some console output but you're probably confused about the SIP peer names and/or are dialing the wrong thing`
`03:57.35`	`SeRi`	`o ok cool`
`03:57.47`	`p3nguin`	`This is stupid. And ssh -D proxy works fine from my desktop, but does not work on my laptop.`
`03:58.43`	`p3nguin`	`Very irritating.`
`03:59.19`	`p3nguin`	`Especially when I NEED it to work to bypass a stupid corporate firewall so I can do my work.`
`04:06.58`	`SeRi`	`:(`
`04:08.02`	`p3nguin`	`I don't see any difference in how I connect from each.`
`04:12.09`	`SeRi`	`p3nguin: the inbound call will be identify by an IP?`
`04:12.27`	`p3nguin`	`The inbound call will be a regular inbound call.`
`04:13.01`	`SeRi`	`yes but to start the from-pr context the exten => would be?`
`04:13.18`	`p3nguin`	`I have no idea what you're asking.`
`04:13.36`	`*** join/#asterisk JuStIcIa_ (~JuStIcIa_@190.167.49.178)`
`04:14.34`	`p3nguin`	`Do you understand call flow?`
`04:16.17`	`SeRi`	`so when he calls me what would it show as an exten when he calls? for example voip.ms when sending a call you have to have an inbound context with the did to properly route the calls ie: [voip.ms-inbound] exten => 7133487756,1,GoTo(fax-rx0)`
`04:16.41`	`p3nguin`	`Whatever extension he sends is what you'll receive.`
`04:18.36`	`p3nguin`	`Do you understand call flow?`
`04:18.41`	`SeRi`	`yes`
`04:31.15`	`SeRi`	`p3nguin: right now I am set for 100[0-9] from my ext. I am now on dual digits ie: 1010 how do I change it?`
`04:31.18`	`SeRi`	`Thanks!`
`04:31.55`	`p3nguin`	`_10[01][0-9]`
`04:32.05`	`p3nguin`	`wait, 0-9 is X`
`04:32.09`	`p3nguin`	`_10[01]X`
`04:33.58`	`ketas-ts`	`p3nguin: is it allowed to bypass corporate fw? :P`
`04:34.32`	`p3nguin`	`I don't work for the corp, so I really don't care about their policies. I just have work to do and can't be bothered with their crap.`
`04:34.46`	`SeRi`	`Thanks p3nguin`
`04:35.02`	`*** part/#asterisk bbourdage (~bbourdage@75-150-221-205-Illinois.hfc.comcastbusiness.net)`
`04:35.50`	`p3nguin`	`I couldn't even get my training materials from my email because their crap is so locked down.`
`04:36.54`	`SeRi`	`that sucks....`
`04:37.01`	`SeRi`	`gov?`
`04:37.09`	`p3nguin`	`worse`
`04:37.15`	`SeRi`	`isp?`
`04:37.19`	`p3nguin`	`healthcare`
`04:37.22`	`SeRi`	`ha!`
`04:37.23`	`SeRi`	`LOL`
`04:38.33`	`p3nguin`	`One guy tells me, "Just grab your laptop and hook it up." So I did. My device was not authorized and I didn't have their credentials to authorize my device.`
`04:38.51`	`p3nguin`	`So I tell him, "Shouldn't be a problem... I know how to get around it."`
`04:38.52`	`SeRi`	`cisco clean acces?`
`04:39.07`	`ketas-ts`	`hahaha`
`04:39.13`	`p3nguin`	`So I grab a term and ssh -D3128 my.server ...`
`04:39.29`	`p3nguin`	`Point my browser to localhost 3128 socks5 proxy...`
`04:39.36`	`p3nguin`	`And nothing happens.`
`04:39.41`	`SeRi`	`:/`
`04:39.44`	`ketas-ts`	`:P`
`04:39.52`	`p3nguin`	`I don't get it.`
`04:40.11`	`ketas-ts`	`fw bypassed you`
`04:40.24`	`p3nguin`	`No, it's my laptop.`
`04:40.35`	`p3nguin`	`I'm back on my own LAN and it still does not work.`
`04:40.40`	`p3nguin`	`But my desktop does.`
`04:40.43`	`p3nguin`	`same ssh server`
`04:40.48`	`ketas-ts`	`eh?`
`04:40.50`	`p3nguin`	`Does not make sense to me.`
`04:40.57`	`ketas-ts`	`why should it not work`
`04:41.07`	`p3nguin`	`I can't see any reason it should not work. But it doesn't work.`
`04:41.09`	`ketas-ts`	`ssh -V`
`04:41.19`	`p3nguin`	`OpenSSH_5.6p1, OpenSSL 1.0.0a 1 Jun 2010`
`04:41.26`	`p3nguin`	`laptop^`
`04:42.05`	`ketas-ts`	`doesn't make sense actually`
`04:42.27`	`p3nguin`	`The desktop worked when it was using 5.5p1, so it probably isn't the version that is giving me the trouble.`
`04:42.51`	`ketas-ts`	`eh?`
`04:43.24`	`ketas-ts`	`do you get any errors from ssh`
`04:43.54`	`SeRi`	`ssl perhaps?`
`04:43.54`	`p3nguin`	`Let me launch it with -vvv and then try to access web via proxy.`
`04:44.09`	`SeRi`	`ubuntu had many issues when they change to their own ssl build`
`04:44.54`	`ketas-ts`	`do they want to follow debian :P`
`04:45.10`	`SeRi`	`I hate ubuntu`
`04:45.10`	`p3nguin`	`Nothing appeared when I tried that. The browser doesn't even wait very long before saying "The connection has timed out."`
`04:45.37`	`ketas-ts`	`and no errors`
`04:45.42`	`p3nguin`	`It would normally take at least a full minute, but when I am trying to proxy it, it takes like 20 seconds.`
`04:45.42`	`ketas-ts`	`weird`
`04:48.04`	`p3nguin`	`I see a few lines where it says it will be listening and forwarding to channel 0.`
`04:48.31`	`ketas-ts`	`why should it timeout, really`
`04:48.32`	`p3nguin`	`I guess I need to compare output between the desktop (works) and the laptop (doesn't work).`
`04:48.47`	`p3nguin`	`I thought it was odd that the timeout was so short.`
`04:49.05`	`ketas-ts`	`no fw?`
`04:49.26`	`p3nguin`	`I thought of that... no rules, policies are ACCEPT.`
`04:49.29`	`p3nguin`	`Maybe I can try a different browser with better success.`
`04:49.36`	`p3nguin`	`s/better //`
`04:50.39`	`resist0r`	`p3nguin: Im jump'n in this late so sorry if its already gone over -- but can you create a localhost proxy and point your browser at localhost in the proxy settings ssh -L3128:localhost:3128 user@domain`
`04:51.03`	`p3nguin`	`I'm doing dynamic forwarding with -D`
`04:51.20`	`p3nguin`	`for the purpose of a browser socks proxy.`
`04:51.54`	`*** join/#asterisk Guest83700 (~bbourdage@75-150-221-205-Illinois.hfc.comcastbusiness.net)`
`04:53.29`	`p3nguin`	`firefox-3.6.24 here I come.`
`04:54.31`	`ketas-ts`	`you meant ff10?`
`04:54.42`	`p3nguin`	`hah, no`
`04:54.58`	`ketas-ts`	`i recently upgraded from 8.0.1 to 9.0... looked stupid`
`04:55.19`	`p3nguin`	`I refuse to partake in their ridiculousness.`
`04:56.08`	`ketas-ts`	`p3nguin: it it's quick and painless`
`04:56.16`	`ketas-ts`	`don't refuse`
`04:57.08`	`ketas-ts`	`when they finally release major version... what number do they bump then`
`04:57.14`	`ketas-ts`	`i'm wondering`
`04:58.25`	`p3nguin`	`Note well: ridiculousness.`
`05:01.01`	`ChannelZ`	`so you're going to use an old browser because you don't like their versioning?`
`05:02.24`	`p3nguin`	`Yes.`
`05:03.08`	`p3nguin`	`I am quite satisfied with firefox 3. I was also quite satisfied with firefox 2, but I think my distro stopped supporting it.`
`05:04.13`	`p3nguin`	`I guess they technically stopped supporting 3, but the community still supports it and that is good enough to keep me in business.`
`05:04.44`	`carrar`	`FireFox next major release will be Chrome 50.1.312.41`
`05:04.46`	`ChannelZ`	`I'm sure it runs flawlessly on your 386 running Windows 95`
`05:20.57`	`*** join/#asterisk sixohquad (~sixohquad@2002:b841:8ef9:0:2c26:23d8:506b:a797)`
`05:21.15`	`sixohquad`	`can somebody please tell me why im getting no such command on sip reload or dialplan reload?`
`05:24.24`	`sixohquad`	`asterisk 1.8`
`05:24.27`	`sixohquad`	`fresh install`
`05:24.37`	`sixohquad`	`no gui`
`05:24.47`	`sixohquad`	`built from source`
`05:28.22`	`sixohquad`	`asterisk -vvvvvvvr`
`05:28.25`	`sixohquad`	`sip reload`
`05:28.28`	`sixohquad`	`no such command`
`05:32.30`	`[TK]D-Fender`	`Probably because chan_sip isn't even loaded`
`05:34.57`	`p3nguin`	`dialplan probably doesn't work because pbx_config isn't loaded.`
`05:35.11`	`p3nguin`	`This makes me think that you do not have an appropriate modules.conf.`
`05:35.34`	`p3nguin`	`When you installed, did you make samples?`
`05:35.45`	`*** join/#asterisk curahack (~michel@sub-190-88-85ip69.rev.onenet.an)`
`05:36.03`	`[TK]D-Fender`	`20probably not`
`05:36.30`	`curahack`	`Can Asterisk be run on a OpenVZ VPS?`
`05:58.50`	`*** join/#asterisk sixohquad (~sixohquad@184.65.142.249)`
`05:58.59`	`sixohquad`	`no i didn't make samples\`
`05:59.11`	`sixohquad`	`do people typically make samples?`
`05:59.23`	`sixohquad`	`i saw a couple tutorials that said not to bother`
`05:59.40`	`carrar`	`heh`
`05:59.44`	`p3nguin`	`If you know what you are doing and you can make all of your own confs, you don't need to.`
`05:59.47`	`sixohquad`	`but obviously there's stuff im missing`
`05:59.54`	`carrar`	`~book`
`05:59.54`	`infobot`	`Asterisk: The Definitive Guide, 3rd Edition (ISBN 0-596-51734-3) available at http://oreilly.com/catalog/9780596517342 - Asterisk: The Definitive Guide is released under a Creative Commons License (http://creativecommons.org/licenses/by-nc-nd/3.0/us/) and is available for reading online at http://www.asteriskdocs.org/ or see ~buybook`
`05:59.55`	`sixohquad`	`yeah`
`06:00.01`	`p3nguin`	`But it was apparent that you missed something important. You need the sample files.`
`06:00.09`	`sixohquad`	`yeah for sure`
`06:00.20`	`sixohquad`	`i hate being a n00b`
`06:00.25`	`carrar`	`yeah`
`06:00.27`	`carrar`	`it sucks`
`06:00.44`	`sixohquad`	`totally, i wish i could just matrix this shit`
`06:00.50`	`sixohquad`	`PFFFFFFF, you know asterisk`
`06:01.06`	`p3nguin`	`You can go make samples now... as long as you didn't disturb your source tree.`
`06:01.21`	`sixohquad`	`rm -rf'd`
`06:01.22`	`sixohquad`	`kidding`
`06:01.28`	`sixohquad`	`its fine`
`06:01.49`	`p3nguin`	`Not a big deal if you did. You'd just have to go get a new one first.`
`06:02.31`	`sixohquad`	`when i am jedi, you all will embrace me. for now, make samples`
`06:02.33`	`p3nguin`	`This brings up a question: do I have to ./configure and make before I can make samples?`
`06:03.18`	`carrar`	`PHEARING`
`06:03.30`	`carrar`	`PHEARING the EMBRACE`
`06:03.37`	`sixohquad`	`hahaha`
`06:04.03`	`sixohquad`	`i wondering how many other people were lanning with him`
`06:08.43`	`carrar`	`I'm not lanning with anyone`
`06:08.51`	`carrar`	`not into lan parties`
`06:09.24`	`carrar`	`unless your that guy from google that turned his house into a lan party house`
`06:09.32`	`carrar`	`that seems interesting`
`06:10.37`	`carrar`	`http://kentonsprojects.blogspot.com/2011/12/lan-party-optimized-house.html`
`06:11.35`	`sixohquad`	`hah crazy`
`06:12.15`	`sixohquad`	`7 or 8 years ago i through a lan party at a curling rink near here. 550 people`
`06:15.45`	`sixohquad`	`I ON MY OWN. chuck norris`
`06:15.52`	`sixohquad`	`there was like 6 of us`
`06:20.31`	`sixohquad`	`you guys solved my problem btw. geniuses, all of you. even the -o's`
`06:36.46`	`*** join/#asterisk jeffgus (~jeffgus@2001:470:f2eb:1::4)`
`06:40.09`	`*** join/#asterisk xpot (~xpot@166-70-100-198.ip.xmission.com)`
`06:40.57`	`SeRi`	`p3nguin: all is working thanks!`
`06:41.21`	`SeRi`	`but when I call my brother the ivr application complains about the file been ulaw and unable to play it on g722`
`06:41.32`	`SeRi`	`is there a way to make it for both of them?`
`06:51.49`	`SeRi`	`Unable to open custom/IVR-MAIN-GREETING (format 0x1000 (g722)): No such file or directory`
`06:57.39`	`*** join/#asterisk roham (~ali@31.184.187.2)`
`07:00.22`	`SeRi`	`done.`
`07:00.28`	`SeRi`	`Thanks for the help p3nguin!`
`07:20.15`	`*** join/#asterisk jmwpc (~jmwpc@c-24-5-58-60.hsd1.ca.comcast.net)`
`07:22.22`	`*** join/#asterisk gerhard7 (~gerhard7@82-168-115-40.ip.telfort.nl)`
`07:28.26`	`jmwpc`	`hello #asterisk - I just installed an X100p fxo card, dahdi, and rebuilt asterisk. I can't seem to dial out using my home phone line - here's all (i hope) the relevant info http://pastebin.com/Gc2QUwHt`
`07:38.03`	`jmwpc`	`I can't dial out with my x100p fxo card... #asterisk is silent on the matter - http://pastebin.com/Gc2QUwHt`
`07:38.22`	`jmwpc`	`lulz... wrong channel`
`07:44.34`	`*** part/#asterisk jmwpc (~jmwpc@c-24-5-58-60.hsd1.ca.comcast.net)`
`07:49.37`	`*** join/#asterisk mintos (~mvaliyav@114.143.161.169)`
`07:49.58`	`EmleyMoor`	`Are there any hidden costs/points to beware of with the Cisco SPA 501G?`
`07:56.25`	`*** join/#asterisk mintos (~mvaliyav@114.143.161.169)`
`07:57.58`	`*** join/#asterisk jmwpc (~jmwpc@c-24-5-58-60.hsd1.ca.comcast.net)`
`07:58.19`	`coppice`	`Its a sick industry where that is a value question`
`07:58.33`	`*** join/#asterisk mintos (~mvaliyav@114.143.161.169)`
`07:59.22`	`jmwpc`	`hello again - still struggling to get outbound calls working on an x100p card - http://pastebin.com/Gc2QUwHt - i hope this is all the info`
`08:07.03`	`Maliuta`	`jmwpc: need to see more of what's in the extensions.conf ... is that exten in the right context?`
`08:10.30`	`jmwpc`	`Maliuta: I believe so. I get the following message from the cli when attempting to dial out: Executing [5551212@google-out-xxxx:1] Dial("SIP/103-00000008", "DAHDI/1/5551212") in new stack`
`08:11.00`	`jmwpc`	`but the target phone (my cell) never rings, and I hear nothing on the dialing extension`
`08:13.33`	`Maliuta`	`jmwpc: show me the file.`
`08:13.40`	`jmwpc`	`k... one moment`
`08:14.07`	`Maliuta`	`jmwpc: for starters you should only need to pass the DAHDI channel if you want it to ring`
`08:15.02`	`Maliuta`	`jmwpc: and let me get this straight ... you have a handset attached to the dahdi chan, and not an incoming line?`
`08:18.36`	`jmwpc`	`incomng line... it's an fxo card`
`08:18.38`	`jmwpc`	`http://pastebin.com/R588srWa`
`08:19.42`	`jmwpc`	`I am trying to use it in place of google-voice for local calls... wife's family in confused by the different caller ids presented by the google numbers`
`08:21.01`	`jmwpc`	`the phone line is plugged into the fxo port, and I tested a handset on the passthru port which worked correctly`
`08:27.39`	`ChannelZ`	`Do you get a ring indication on the console if you call the line?`
`08:28.59`	`jmwpc`	`let me give that a try... will me a minute`
`08:29.11`	`*** join/#asterisk lanning (~lanning@173-8-187-197-SFBA.hfc.comcastbusiness.net)`
`08:31.44`	`jmwpc`	`well this could be a problem... I need to turn off forwarding on that line (it currently forwards to google voice), but my provider's web site is all kinds of broken`
`08:32.17`	`jmwpc`	`* Shakes fist at Comcast *`
`08:33.41`	`ChannelZ`	`well the thing to figure out is if the FXO is working. You might try running dahdi_monitor and dumping to a file, doing a test call, and then listening to the audio afterwards for some insight as to what might be going on`
`08:33.52`	`jmwpc`	`Most of what i have been reading in forums points to needing to add a delay before dialing, where do I add that?`
`08:34.01`	`ChannelZ`	`and that's the other thing to try`
`08:34.15`	`ChannelZ`	`put a 'w' or two prior to the digits`
`08:34.22`	`ChannelZ`	`Dial(DAHDI/1/w5551212)`
`08:35.06`	`ChannelZ`	`I have to do this on my system at work, as the telco doesn't quite provide the dialtone quick enough`
`08:35.35`	`jmwpc`	`It would be that simple... :) Let me see where that, and the dahdi_monitor gets me and go from there. Thanks for the help`
`08:36.50`	`ChannelZ`	`good luck, I'm off to bed`
`08:39.01`	`Maliuta`	`jmwpc: I think you might want the line to wait a little to get a dialtone (I remember futzing with it when I was using a hardline)`
`08:44.13`	`jmwpc`	`Maliuta: I'm leaning towards that being the issue... I'll keep messing with it.`
`08:45.33`	`Maliuta`	`pretty sure it needs to wait a fraction of a second before actually sending something down the channel`
`08:45.34`	`jmwpc`	`hmmm... from dahdi_monitor 1 -vv .. Rx: 0 ( 0) Tx: 0 ( 0)`
`08:45.42`	`Maliuta`	`eats dinner`
`08:57.51`	`*** join/#asterisk irroot (~gregory@41.54.190.5)`
`08:58.16`	`*** part/#asterisk irroot (~gregory@41.54.190.5)`
`09:00.43`	`*** join/#asterisk xpot (~xpot@166-70-100-198.ip.xmission.com)`
`09:00.55`	`jmwpc`	`well i think this is a problem for tomorrow... thanks Maliuta & ChannelZ`
`09:35.48`	`*** join/#asterisk imox (~imox@91-64-181-64-dynip.superkabel.de)`
`10:08.50`	`*** join/#asterisk rajmohan (~rajmohan@117.193.177.181)`
`10:12.45`	`*** join/#asterisk tzafrir (~tzafrir@212.179.75.202)`
`10:23.16`	`*** join/#asterisk master_of_master (~master_of@p57B5538A.dip.t-dialin.net)`
`10:35.30`	`*** join/#asterisk ferdna (~ferdna@cpe-67-10-220-35.elp.res.rr.com)`
`10:40.26`	`*** join/#asterisk drmessano (~nonya@pdpc/supporter/active/drmessano)`
`11:17.28`	`*** join/#asterisk gerhard7 (~gerhard7@82-168-115-40.ip.telfort.nl)`
`11:38.17`	`*** join/#asterisk irroot (~gregory@197.172.85.4)`
`11:38.43`	`*** part/#asterisk irroot (~gregory@197.172.85.4)`
`11:41.02`	`*** join/#asterisk xgoethe (~xgoethe@213.Red-88-9-3.dynamicIP.rima-tde.net)`
`11:41.46`	`*** join/#asterisk IsUp (IsUp@unaffiliated/isup)`
`11:41.55`	`IsUp`	`hi`
`11:42.27`	`*** join/#asterisk xgoethe (~xgoethe@213.Red-88-9-3.dynamicIP.rima-tde.net)`
`11:43.51`	`tech`	`anyone around?`
`11:43.56`	`*** join/#asterisk sekil (~sekil@78.24.104.82)`
`11:44.01`	`*** part/#asterisk sekil (~sekil@78.24.104.82)`
`11:47.45`	`*** join/#asterisk brdude (~brdude@c-24-130-20-142.hsd1.ca.comcast.net)`
`11:55.43`	`*** join/#asterisk portnov (~portnov@v-20678-unlim.vpn.mgn.ru)`
`11:55.48`	`portnov`	`hi all`
`12:02.45`	`*** join/#asterisk simNIX (~simNIX@82-170-89-67.ip.telfort.nl)`
`12:11.39`	`portnov`	`https://issues.asterisk.org/view.php?id=18229`
`12:12.03`	`portnov`	`how can I know what is status of the patch? Is it in some released version of * ?`
`12:19.49`	`*** join/#asterisk Maliuta (~nobusines@kiev.lusan.id.au)`
`12:21.02`	`*** join/#asterisk cnu (~cnu@the.ultimate.lamer.la)`
`12:22.45`	`*** join/#asterisk \|Physis\| (c909e49a@gateway/web/freenode/ip.201.9.228.154)`
`12:23.31`	`\|Physis\|`	`New WebPage NPX, www.npxtech.com.br !!`
`12:34.01`	`*** join/#asterisk binbash_ (~peter@server.digitog.nl)`
`12:35.36`	`WIMPy`	`portnov: As long as there's no commit notice, you have to patch yourself.`
`12:37.28`	`*** join/#asterisk roham (~ali@31.184.187.2)`
`12:42.05`	`*** join/#asterisk joobie (~joobie@unaffiliated/moo0o0ooo00o0o0o)`
`12:42.35`	`joobie`	`hey guys.. I've got a Sangoma ISDN card that uses DAHDI.. i just bought a GSM G400P card and put that in, and going through the install docs now`
`12:42.53`	`*** join/#asterisk timahvo1 (~rogue@197.177.117.98)`
`12:42.58`	`joobie`	`it mentions that it can't find dahdi-linux-complete and asks if it wants to install it for me`
`12:43.12`	`joobie`	`but not sure.. i dont want to screw with my existing dahdi config that i have with the ISDN`
`12:43.17`	`joobie`	`any tips?`
`12:43.32`	`*** join/#asterisk rajmohan (~rajmohan@59.97.104.22)`
`12:43.43`	`joobie`	`it says i can specify the dahdi-linux-complete path as an option too, but is this the same dahdi that would be used for ISDN?`
`12:44.22`	`WIMPy`	`Yes`
`12:44.48`	`WIMPy`	`There is only one dahdi and one config. But one driver per type of card.`
`12:46.17`	`joobie`	`hmm`
`12:46.32`	`joobie`	`what should i do here?`
`12:46.55`	`joobie`	`it says it can download and install dahdi-linux-complete, but i dont want it to impact the ISDN using dahdi`
`12:47.03`	`WIMPy`	`Merge the configs in to one.`
`12:47.51`	`WIMPy`	`Not knowing your packages, I have no idea what it thinks it is missing.`
`12:47.51`	`joobie`	`the installer for the G400P doesn't give me that option`
`12:48.03`	`WIMPy`	`But there is no way to keep it seperate.`
`12:48.04`	`joobie`	`it wants dahdi-linux-complete`
`12:48.13`	`joobie`	`i onyl have dahdi-linux which i used for my ISDN`
`12:48.37`	`WIMPy`	`You can add dahdi-tools then.`
`12:48.51`	`WIMPy`	`complete=linux+tools`
`12:50.07`	`joobie`	`i have tools also`
`12:50.39`	`joobie`	`im basically following this http://downloads.openvox.cn/pub/manuals/V2.2/English/G400P%20User%20Manual.pdf`
`12:50.49`	`joobie`	`it has a bash script for install`
`12:51.12`	`joobie`	`it gets to a stage where it says "can't find dahdi-linux-complete directory"`
`12:51.20`	`WIMPy`	`If you have both, then you should be able to skip that part.`
`12:51.29`	`WIMPy`	`Unless it needs a later version.`
`12:52.02`	`joobie`	`and it gives me 4 options.. (1) download and install dahdi-linux-complete (2) enter dahdi-linux-complete dir path manually (3) download the latest version of dahdi-linux-complete (4) skip the step`
`12:52.36`	`joobie`	`ahh so go skip on that step?`
`12:52.48`	`WIMPy`	`I'd try that one.`
`12:53.52`	`joobie`	`ok i think that worked`
`12:54.05`	`joobie`	`now it says it cant find asterisk`
`12:54.09`	`joobie`	`sec ill point it manually`
`12:55.31`	`joobie`	`OK it took that when i did it manually, i specified the SRC of my asterisk - but now it says it's going to install the openvox modules to the src directory`
`12:55.59`	`joobie`	`hmm it looks like it's recompiling a few asterisk modules`
`12:59.35`	`WIMPy`	`Wow. the channeltype "extra" deserves a price for being descriptive. But I wonder where dahdi is involved here.`
`12:59.59`	`joobie`	`this damn script`
`13:00.05`	`joobie`	`just did a make and make install on my asterisk src`
`13:00.15`	`joobie`	`talk about obtrusive`
`13:02.19`	`joobie`	`it says to do 'service dahdi start' but i dont have dahdi as a service`
`13:02.25`	`joobie`	`page 22`
`13:04.15`	`joobie`	`WIMPy, chan_extra.so is there now.. do you mind checking out page 22 of the doc to see what you think?`
`13:04.36`	`WIMPy`	`restart it the way you do it.`
`13:04.38`	`joobie`	`i dont have dahdi as a service.. and the other steps, im worried about doing that and it affecting my ISDN`
`13:04.48`	`joobie`	`but what about the module`
`13:05.07`	`WIMPy`	`genconf will generate a new config.`
`13:05.12`	`WIMPy`	`So make sure you have a backup.`
`13:05.27`	`joobie`	`just of /etc/dahdi/system.conf ?`
`13:05.31`	`joobie`	`i use wanpipe too`
`13:05.36`	`joobie`	`duno if that will be impacted..`
`13:06.12`	`WIMPy`	`and what's it called? dahdi_channels.conf if you use that.`
`13:06.36`	`joobie`	`last time i ran that dahdi commands - it asked me about E1`
`13:06.56`	`joobie`	`this card is a GSM card.. i have both - i can't recall having the ability in the config to configure multiple cards`
`13:07.03`	`joobie`	`it just gives you the one card right..?`
`13:07.42`	`\|Physis\|`	`NPX :: Soluções em Telecomunicações Utilizando o conceito de redes convergentes a NPX desenvolveu uma solução de PABX-IP extremamente versátil, que segue as tendências dos avanços mundiais em telecomunicações. Novo Site. www.npxtech.com.br`
`13:07.45`	`WIMPy`	`genconf should generate a config for all cards.`
`13:08.10`	`WIMPy`	`\|Physis\|: Where's the english version of that site?`
`13:09.33`	`\|Physis\|`	`new site, 63% translated`
`13:10.59`	`*** join/#asterisk irroot (~gregory@41.51.107.6)`
`13:11.36`	`*** part/#asterisk irroot (~gregory@41.51.107.6)`
`13:11.49`	`joobie`	`hmm`
`13:14.13`	`joobie`	`it fuekd my dahdi config a bit`
`13:14.31`	`joobie`	`but the device is still unknown`
`13:14.38`	`joobie`	`depmod -a mustnt have added the driver`
`13:14.43`	`joobie`	`any ideas WIMPy ?`
`13:15.00`	`WIMPy`	`depmod it yourself and run genconf again.`
`13:15.48`	`joobie`	`i did depmod -a`
`13:16.31`	`WIMPy`	`err.`
`13:16.53`	`WIMPy`	`modprobe it yourself and run genconf again.`
`13:18.52`	`joobie`	`what module should i be loading with modprobe?`
`13:19.20`	`WIMPy`	`Didn;t the manual have the name?`
`13:20.07`	`joobie`	`it says to do just 'depmod -a' .. but then in a dmesg it shows mention of opvxg4xx`
`13:20.28`	`joobie`	but i did ls /lib/modules/`uname -r` and i dont see any openvox related modules
`13:20.39`	`joobie`	`i see a dahdi dir, but in there no openvox modules that im aware of`
`13:21.11`	`WIMPy`	`Yes, that must be the one.`
`13:21.46`	`WIMPy`	`Hmm. So it wasn't installed?`
`13:21.51`	`joobie`	`http://pastebin.com/0iBSvEVh`
`13:21.55`	`joobie`	`those are the only modules in there`
`13:22.15`	`WIMPy`	`Maybe skipping the dahdi ting doesn't just skip the download?`
`13:22.27`	`joobie`	`yea`
`13:22.32`	`joobie`	`maybe`
`13:23.33`	`*** join/#asterisk mintos (~mvaliyav@114.143.161.169)`
`13:25.53`	`joobie`	`grr`
`13:26.01`	`joobie`	`i tried modprobe dahdi`
`13:26.05`	`joobie`	`still unknwon device`
`13:29.58`	`joobie`	`ok it's definitely opvxg4xx`
`13:34.43`	`joobie`	`WIMPy`
`13:34.48`	`joobie`	`i think this version of dahdi doesnt have the driver`
`13:35.37`	`joobie`	`if i want to go with the newer version it can install for me, will it cause any grief if i do this ontop of my current version?`
`13:37.02`	`joobie`	`yea BAM.. the newer dahdi has the driver (just saw it during install)`
`13:37.20`	`joobie`	`ISDN is fuked now neway.. just tried to call it and it's giving busy`
`13:48.07`	`joobie`	`i just did modprobe -r dahdi`
`13:48.13`	`joobie`	`to load up the new dahdi module`
`13:48.17`	`joobie`	`and the server crashed when i did that`
`13:51.51`	`WIMPy`	`Ouch.`
`13:53.04`	`*** join/#asterisk felimwhiteley (~quassel@089-101-203026.ntlworld.ie)`
`13:54.16`	`joobie`	`just rung the NOC to have it power cycled`
`13:58.23`	`WIMPy`	`Not an easy situation. as wanpipe also somehow depends on dahdi.`
`13:59.19`	`joobie`	`i think it's partially running after reboot`
`13:59.26`	`joobie`	`dahdi has the new module loaded`
`13:59.36`	`joobie`	`just trien to get my head around where it's at.. seeing some weird results atm`
`14:00.03`	`WIMPy`	`The module for the card?`
`14:00.45`	`WIMPy`	`Is dahdi_hardware showing both cards icl. drivers?`
`14:01.41`	`joobie`	`http://pastebin.com/GVjQNQsc`
`14:01.50`	`joobie`	`but when i go into asterisk dahdi is not a valid cmd`
`14:02.04`	`joobie`	`nor is gsm (which is meant to come with the openvox`
`14:02.17`	`WIMPy`	`wanpipe seems to be missing.`
`14:02.35`	`joobie`	`does the - indicate it's not loaded/`
`14:02.41`	`WIMPy`	`I guess you may have to re-make that for the current dahdi.`
`14:02.46`	`WIMPy`	`yes`
`14:03.48`	`joobie`	`WIMPy, is wanpipe zaptel?`
`14:04.00`	`joobie`	`ie. i cant have wanpipe and dahdi running at the same time?`
`14:04.15`	`WIMPy`	`No. Zaptel is the old name of dahdi.`
`14:04.19`	`joobie`	`ahh`
`14:04.34`	`WIMPy`	`wanpipe is the Sangoma driver.`
`14:04.38`	`joobie`	`ahhh`
`14:05.01`	`joobie`	`do you know the cmd to do the install in wanpipe src?`
`14:05.05`	`joobie`	`i have the src i was using before`
`14:05.22`	`WIMPy`	`No.`
`14:05.29`	`joobie`	`http://pastebin.com/V9ymmVtf`
`14:05.35`	`joobie`	`it says this.. but not sure which one to go for`
`14:05.39`	`joobie`	`that is in the README`
`14:05.39`	`WIMPy`	`make and make install would be the obvious guess.`
`14:06.02`	`joobie`	`what about ./Setup zaptel ?`
`14:06.17`	`WIMPy`	`Sounds dated.`
`14:06.27`	`joobie`	`it's on a 1.4 asteirsk setup`
`14:06.31`	`joobie`	`it is`
`14:06.34`	`WIMPy`	`It's not a bri card you have. is it?`
`14:06.41`	`joobie`	`no, it's a E1`
`14:06.41`	`WIMPy`	`Oh`
`14:07.00`	`*** join/#asterisk Da-Geek (~Da-Geek@11.74.155.90.in-addr.arpa)`
`14:07.03`	`WIMPy`	`But it's a later version that already uses dahdi?`
`14:07.45`	`joobie`	`i dont follow`
`14:07.57`	`joobie`	`this is the version of wanpipe i used for the original install`
`14:08.01`	`joobie`	`which works ok`
`14:08.17`	`WIMPy`	`You do use dahdi and no zaptel, I hope.`
`14:08.34`	`joobie`	`well, im not 100%`
`14:08.44`	`joobie`	`before i started openvox toying around, i didnt have a dahdi service`
`14:08.53`	`joobie`	`now i do which came witht he install of the new dahdi version`
`14:09.00`	`joobie`	`that makes me think that i didnt use dahdi in the past`
`14:09.00`	`WIMPy`	`On the E1 you you Dial(dahid/... or Dial(zap/... ?`
`14:09.15`	`joobie`	`DAHDI`
`14:09.20`	`joobie`	`in the dialplan`
`14:09.23`	`joobie`	`no zap`
`14:09.34`	`WIMPy`	`Ok, so it has been dahdi before. Good.`
`14:10.06`	`joobie`	`phew :)`
`14:10.12`	`joobie`	`i did do "dahdi show status" in asterisk too btw`
`14:10.17`	`WIMPy`	`That should be the general installation than.`
`14:10.22`	`WIMPy`	`then`
`14:10.27`	`joobie`	`so the ./Setup install ?`
`14:10.44`	`WIMPy`	`yes`
`14:10.52`	`joobie`	`thanks :) ill try now`
`14:11.05`	`WIMPy`	`And hope that doesn't re-install dahdi, removing the openvox stuff.`
`14:12.05`	`joobie`	`http://pastebin.com/9YEzQHJi`
`14:12.16`	`joobie`	`that is where im at in the install of wanpipe`
`14:12.28`	`joobie`	`im not sure which one is for me`
`14:13.09`	`WIMPy`	`I'm a little bothered about reading Zaptel there.`
`14:13.22`	`WIMPy`	`But 3 should be all you nee, I suppose.`
`14:14.06`	`joobie`	`ok it's proceeding.. it then looked for zaptel/dahdi`
`14:14.11`	`joobie`	`and i pointed it to dahdi src (the new one)`
`14:14.20`	`joobie`	`it's compiling the module now.. looks promising`
`14:14.39`	`WIMPy`	`good`
`14:14.39`	`joobie`	`damnit`
`14:14.40`	`joobie`	`error`
`14:15.20`	`WIMPy`	`I guess you've got a newer dahdi than before now?`
`14:15.22`	`joobie`	`http://pastebin.com/UhXet3eg`
`14:15.26`	`joobie`	`nod`
`14:16.03`	`joobie`	`reacon i need to go for a newer wanpipe?`
`14:16.33`	`WIMPy`	`Maybe. But actually that doesn't look that bad I think.`
`14:16.42`	`joobie`	`mm?`
`14:17.12`	`WIMPy`	`Yes, it seems to be incompatible to the dahdi version.`
`14:18.39`	`joobie`	`would you suggest i get the latest wanpipe version?`
`14:19.14`	`joobie`	`im using 3.3.15 .. on ftp://ftp.sangoma.com/linux/current_wanpipe/ i can see 3.5.6`
`14:20.41`	`joobie`	`hmm im gona try stable`
`14:21.07`	`WIMPy`	`I have no idea what versions are compatible.`
`14:21.27`	`joobie`	`ok stable is 3.4.9`
`14:21.29`	`joobie`	`let's se ehow this goes`
`14:21.34`	`WIMPy`	`But using the latest stable is usually a good idea, I think.`
`14:22.19`	`joobie`	`BTW that option WIMPy, it now says "3. TDM Voice (Dahid/Zaptel) + WAN Protocol Support"`
`14:22.35`	`joobie`	`ie. it mentions Dahid, i think they mean Dahdi :P`
`14:22.57`	`joobie`	`damnit, same error`
`14:25.43`	`*** join/#asterisk [TK]D-Fender (~chatzilla@64.235.218.194)`
`14:25.43`	`*** join/#asterisk Tuju (~tuju@176.75.219.213.sta.estpak.ee)`
`14:25.43`	`*** join/#asterisk k-man (~k-man@unaffiliated/k-man)`
`14:25.43`	`*** join/#asterisk bipolar (~bipolar@offsitesysadmin.com)`
`14:25.43`	`*** join/#asterisk aways (~aways@89-158-146-16.rev.dartybox.com)`
`14:25.43`	`*** join/#asterisk Iamnacho (~Iamnacho@ip174-70-139-212.ks.ks.cox.net)`
`14:25.43`	`*** join/#asterisk mahlon (mahlon@martini.nu)`
`14:26.56`	`joobie`	`WIMPy, http://pastebin.com/3rCG4YfR which would you suggest here?`
`14:27.02`	`joobie`	`this version is the latest`
`14:27.26`	`WIMPy`	`2`
`14:27.43`	`joobie`	`thanks.. BTW what are you looking for that leads you to 2 ?`
`14:27.48`	`joobie`	`just for knowledge sake`
`14:28.16`	`WIMPy`	`"PRI"`
`14:30.11`	`joobie`	`ahh k`
`14:30.18`	`joobie`	`OK looks like wanpipe went OK this time`
`14:30.28`	`WIMPy`	`cool`
`14:30.32`	`joobie`	`do i need to run wancfg_dahdi`
`14:32.01`	`joobie`	`i found a post that said you need to use downgrade to dahdi 2.2 to use the older wanpipe modules`
`14:32.12`	`*** join/#asterisk Ionic (ionic@ionic.de)`
`14:37.56`	`joobie`	`OK i ran it, configured it up and then went to restart asterisk as apart of the process and modprobe tried to unload dahdi_echocon_mg2 and failed.. so im rebooting`
`14:42.01`	`joobie`	`WIMPy, same response in dahdi_hardware`
`14:42.20`	`joobie`	`gsm commands are working now in asterisk.. but doesnt look like the E1 is present`
`14:59.22`	`*** join/#asterisk bmg505 (~leon@196-209-10-111.dynamic.isadsl.co.za)`
`15:06.21`	`WIMPy`	`So I guess the wanpipe stuff isn;t getting started?`
`15:06.29`	`*** join/#asterisk tamiel (~tamiel@85-171-170-252.rev.numericable.fr)`
`15:08.52`	`joobie`	`im not sure WIMPy`
`15:09.12`	`joobie`	`http://pastebin.com/22gW2Xhq`
`15:09.19`	`joobie`	`check that out - it comes up in dahdi but as inactive`
`15:09.57`	`WIMPy`	`Ok, that's good that far.`
`15:10.21`	`WIMPy`	`You just hit the usual issue that your channels have been reordered.`
`15:10.45`	`WIMPy`	`So you have to adjust the cahnnel numbers in chan_dahdi.conf.`
`15:11.06`	`WIMPy`	`Or maybe you can make sure to load the wanpipe stuff before the openvox module in order to keep the old channel numbers.`
`15:12.39`	`joobie`	`WIMPy, we are on the same wavelength :)`
`15:13.04`	`joobie`	`i just edited dahdi/system.conf and changed the d/bchans for the openvox to be after the e1`
`15:13.22`	`WIMPy`	`You can't do that.`
`15:13.49`	`joobie`	`hmm i did already and just rebooted`
`15:13.53`	`joobie`	`how come that cant be done?`
`15:13.58`	`WIMPy`	`The dahi module decides the channel numnbers as they are registered by the low level drivers.`
`15:14.35`	`WIMPy`	`in the system.conf you just tell it what (guven) channel has to behave what way.`
`15:14.48`	`joobie`	`what is the channel numbers used for in system.conf? just a read only type thing? I noticed it said "*DONT EDIT**", etc in the motd`
`15:14.53`	`joobie`	`ahhh`
`15:14.57`	`WIMPy`	`For the lowest level. For the upper level, you continue in chan_dahdi.conf.`
`15:15.02`	`joobie`	`well, i hope it comes back up`
`15:15.26`	`portnov`	`there is strange network-related bug in ast_gethostbyname() or somewhere similar… under some circumstances, it sets address family to AF_UNSPEC instead of AF_INET.`
`15:15.31`	`WIMPy`	`The numbers can't be altered manually.`
`15:15.41`	`joobie`	`kk it's back up`
`15:15.43`	`joobie`	`ill revert it`
`15:15.52`	`WIMPy`	`As I said, you may be able to reorder them by loading the driver modules in the desired order.`
`15:17.34`	`joobie`	`is that complex to do WIMPy ?`
`15:17.52`	`joobie`	`ive just updated chan_dahdi.conf and restarted`
`15:17.55`	`*** join/#asterisk FiReSTaRT (~dlyh@unaffiliated/firestart)`
`15:18.02`	`joobie`	`rebooted even.. waiting now`
`15:18.19`	`WIMPy`	`I'd go an blacklist the modules and manually load them.`
`15:19.00`	`WIMPy`	`However in the case of a PRI, channel numbers shouldn;t really matter and the groups don;t have to be in the order of the channels.`
`15:19.22`	`joobie`	`yea`
`15:19.27`	`joobie`	`i might just live with it if this works`
`15:19.32`	`WIMPy`	`But changing hardware is always an annoying thing with dahdi.`
`15:19.48`	`joobie`	`tell me about it`
`15:20.30`	`joobie`	`i went into the NOC earlier today to just plug in the OpenVOX card and found that the free PCI-E slot was hitting a fan when i put the card in`
`15:20.37`	`joobie`	`so had to switch the E1 card to the other slot`
`15:20.55`	`joobie`	`just moving it on the Bus caused it to not function`
`15:21.28`	`WIMPy`	`Shared IRQ?`
`15:22.52`	`joobie`	`naa, the Wanpipe config specifies the specific PCISLOT/BUS`
`15:23.01`	`joobie`	`well i guess that's more the wanpipe than dahdi :P`
`15:23.06`	`WIMPy`	`oh`
`15:23.10`	`joobie`	`WIMPy, we're a step closer but it's still screwed`
`15:23.16`	`WIMPy`	`yes`
`15:23.16`	`joobie`	`just tried dialling and i get a busy tone`
`15:23.23`	`joobie`	`i can see dahdi now in asterisk`
`15:23.32`	`joobie`	`sec ill dump this`
`15:23.51`	`joobie`	`http://pastebin.com/u4pxdsNL`
`15:24.16`	`joobie`	`http://pastebin.com/GUEeTJEU`
`15:24.26`	`joobie`	`previously i couldnt run any dahdi commands from within asterisk console`
`15:24.35`	`joobie`	`but now when i dial the ISDN, it gives me a busy tone`
`15:25.02`	`joobie`	`hmm just saw this in console [Jan 8 02:24:20] WARNING[5709]: chan_dahdi.c:2494 pri_find_dchan: No D-channels available! Using Primary channel 24 as D-channel anyway!`
`15:25.26`	`WIMPy`	`24? That smells like T1 instead of E1.`
`15:25.59`	`WIMPy`	`Or is that the offset from the GSM card?`
`15:26.16`	`WIMPy`	`yes, I think it's the absolute number.`
`15:26.17`	`joobie`	`it starts at 9 now (offset cos of GSM)`
`15:26.34`	`joobie`	`originally i had bchan=1-15,17-31`
`15:26.37`	`joobie`	`16 was dchan`
`15:26.47`	`WIMPy`	`Ok, time to compare to your backups.`
`15:26.58`	`joobie`	`it's right`
`15:27.05`	`joobie`	`i mean based on original dchan`
`15:27.13`	`joobie`	`it's offset to 9 now, making 16 24`
`15:27.27`	`WIMPy`	`yes`
`15:28.24`	`joobie`	`http://pastebin.com/b0BXGr7W that is the current /etc/dahdi/system.conf`
`15:29.04`	`joobie`	`http://pastebin.com/jEX0QXJG that was my old, working /etc/dahdi/system.conf`
`15:30.09`	`joobie`	`do you think it's my span setting?`
`15:30.14`	`*** join/#asterisk vpopov (~happylife@dyn-58-35.fttbee.kis.ru)`
`15:30.41`	`joobie`	`i dont understand how to interpet the span setting, but it seems like it has to do with the sync with the uplink`
`15:31.01`	`WIMPy`	`Timing source looks wrong, but I think wanpipe may actually not use that setting.`
`15:31.46`	`WIMPy`	`Yes, but according to your old config you were generating timing which would definitely be wring.`
`15:31.58`	`WIMPy`	`At least if that's connected to your telco.`
`15:32.12`	`joobie`	`the old config was functional`
`15:32.20`	`joobie`	`and ya it's connected to the telco`
`15:32.37`	`WIMPy`	`yes, I think wanpipe just doesn't use that setting.`
`15:32.38`	`joobie`	`what do i need to set timing to, in order to use telco? is it 0 ?`
`15:32.41`	`joobie`	`ahh`
`15:33.15`	`WIMPy`	`1=1st priority, 2=2nd, ... and 0=genereate yourself.`
`15:34.08`	`joobie`	`i just tried changing dchan to hardhdlc btw`
`15:34.15`	`joobie`	`rebooting the server to try it again`
`15:35.50`	`WIMPy`	`hardhdlc should be better, but I think dchan should also work.`
`15:36.03`	`WIMPy`	`chan_dahdi.conf is the next bit.`
`15:36.18`	`WIMPy`	`Wht does 'dahdi show status' say?`
`15:37.19`	`joobie`	`that did the trick`
`15:37.27`	`WIMPy`	`Oh, and if you have hardware echo cancellation, you can remove the mg2 configuration.`
`15:37.36`	`joobie`	`changing hardhdlc from dchan`
`15:37.46`	`WIMPy`	`Ok. Good to know.`
`15:37.58`	`joobie`	`http://pastebin.com/ckn1MwsV`
`15:38.18`	`joobie`	`wow`
`15:38.25`	`joobie`	`so i have ISDN and GSM working`
`15:38.27`	`WIMPy`	`That looks good.`
`15:38.34`	`WIMPy`	`Great`
`15:38.40`	`joobie`	`http://pastebin.com/x9pQZMXX`
`15:38.45`	`joobie`	`now just gotta figure that out :P heh`
`15:38.51`	`joobie`	`WIMPy, thanks a million for the help above`
`15:39.22`	`WIMPy`	`A million?`
`15:39.44`	`joobie`	`thanks a lot :)`
`15:39.44`	`WIMPy`	`I might consider going paypay for that :-)`
`15:39.48`	`joobie`	`lol`
`15:40.07`	`joobie`	`I went to sri lanka for a holiday 2 weeks ago`
`15:40.21`	`joobie`	`and withdrew 300,000`
`15:40.37`	`joobie`	`i typed that into the ATM and second guessed myself because it sounded like such a large figure`
`15:40.58`	`joobie`	`sorry 30,000`
`15:41.05`	`joobie`	`but in reality it's just $300AUD/USD`
`15:41.06`	`joobie`	`:P`
`15:41.30`	`joobie`	`you could probably score a million in another currency pretty easily :P`
`15:41.37`	`WIMPy`	`Yes, I guess I should have askeswhich currency ;-)`
`15:43.28`	`joobie`	`heh`
`15:43.52`	`joobie`	`http://pastebin.com/cd7nNER8 - ergh, this is looking like it will be another challenge`
`15:45.05`	`WIMPy`	`Looks like it wants the good old module unload and module load instead of module reload.`
`15:45.32`	`WIMPy`	`Maybe I should also try the gsm stuff.`
`15:45.51`	`WIMPy`	`I have only checked basic communication so far.`
`15:46.02`	`WIMPy`	`But I will try the osmocom way.`
`15:46.36`	`*** join/#asterisk gerhard7 (~gerhard7@82-168-115-40.ip.telfort.nl)`
`15:48.15`	`joobie`	`http://pastebin.com/dVQ13NFP - still some grief on a module unload / load`
`15:48.46`	`joobie`	`yea it was a punt - i get really poor reception in the NOC where this server is so wasn't sure it would work with the GSM cards`
`15:49.02`	`joobie`	`many peopel opt to use a GSM gateway though`
`15:49.12`	`joobie`	`rather than these interface cards`
`15:49.22`	`WIMPy`	`Many hosting facilities have bad receprion.`
`15:49.53`	`WIMPy`	`I wouldn't go for them. Too lossy signalling.`
`15:50.19`	`joobie`	`this G400P card though has external antenna support.. im hoping if it doesnt have good enough reception i can just wack a decent antenna on the end`
`15:50.41`	`joobie`	`you wouldnt go for the gsm gateways or the interface cards?`
`15:50.49`	`WIMPy`	`The antenna is definitely the most important bit.`
`15:51.00`	`WIMPy`	`Gateways.`
`15:51.08`	`WIMPy`	`well, SIP gateways that is.`
`15:51.27`	`WIMPy`	`GSM<>ISDN should be fine wrt signalling.`
`15:51.28`	`joobie`	`yer`
`15:51.58`	`joobie`	`i tossed it up and went the interface card so i could have a bit more fun`
`15:52.00`	`WIMPy`	`But with the direct link you could in theory get away without transcoding.`
`15:52.07`	`joobie`	`but many say interface with sip and it's simpler`
`15:52.14`	`WIMPy`	`Although you probably don;t want to.`
`15:52.19`	`joobie`	`heh`
`15:52.31`	`WIMPy`	`Not sure about that one.`
`15:52.35`	`joobie`	`i have a sim card that costs $40 a month`
`15:52.42`	`joobie`	`and it's unlimited calls austrlaia wide`
`15:52.55`	`joobie`	`that's why i bought this thing.. the mobile call rates are getting really cheap in AU`
`15:54.09`	`WIMPy`	`That has been the reason why those gateways have been built.`
`15:54.25`	`joobie`	`ahh`
`15:55.04`	`WIMPy`	`That's why you find them with BRI or PRI so that you cann connect them as external line to your PBX.`
`15:56.30`	`joobie`	`yer`
`15:56.52`	`joobie`	`and from what i read, they are not widely supported on heaps of platforms (at least the openvox wasn't)`
`15:57.12`	`joobie`	`the sip gateway will make some pretty wide support i guess`
`15:57.23`	`WIMPy`	`I haven't looked at the cards so far.`
`15:57.47`	`joobie`	`it set me back about $750AU/US`
`15:57.56`	`joobie`	`that's the card with 4 GSM modules`
`15:58.14`	`joobie`	`GSM modules are about $150 a pop`
`15:58.40`	`WIMPy`	`ye, I guess the SIP things are cheaper. But I'd feel more confident about a card, I think.`
`15:59.14`	`joobie`	`BTW WIMPy .. that dahdi config is now using echocanceller, where as my original wasnt.. should i use this? i didnt have any echo issues in the past without it...`
`15:59.29`	`joobie`	`im the same.. prefer the card`
`15:59.30`	`Ionic`	`Hmm...`
`15:59.35`	`joobie`	`i guess it will give you a bit more flexibility`
`15:59.58`	`joobie`	`i guess, because the gsm gateways wopuld have some web config gui to change stuff around too`
`16:00.08`	`Ionic`	`Weird problem: in my incoming extension, I dial two SIP hosts as the first step and HangUp() as the second step`
`16:00.23`	`Ionic`	`Whenever someone calls me, sound goes out to them but I can't hear anything`
`16:00.48`	`WIMPy`	`Do you have a DSP module on the card?`
`16:00.55`	`Ionic`	`I once managed to get it started with using hold etc. but there's no guarantee it'll ever work`
`16:01.04`	`Ionic`	`Yes, the DSP module does ulaw`
`16:01.09`	`Ionic`	`My SIP clients obviously alaw`
`16:01.20`	`joobie`	`WIMPy, i'm not sure..`
`16:01.27`	`Ionic`	`Oh :p`
`16:01.28`	`Ionic`	`Sorry`
`16:01.29`	`WIMPy`	`Ionic: Sounds like a networking issue.`
`16:01.32`	`joobie`	`i got that card a while back.. few years`
`16:01.32`	`Ionic`	`I hikacked`
`16:01.37`	`joobie`	`any way to check?`
`16:01.41`	`Ionic`	`However, when I call someone via my SIP client, everything works fine`
`16:01.52`	`Ionic`	`i.e. outgoing calls have both incoming and outgoing sound`
`16:02.06`	`Ionic`	`Only incoming calls are lacking the incoming sound`
`16:02.07`	`WIMPy`	`joobie: No idea if wanpipe offers soemthign to check. Maybe dmesg comes up with something.`
`16:02.17`	`WIMPy`	`~sipnat`
`16:02.18`	`infobot`	`[~sipnat] Quick guide on configuring Asterisk + SIP behind NAT: http://www.aocomputing.net/?p=3 otherwise check the WIKI at http://www.voip-info.org/wiki/view/Asterisk+SIP+NAT+solutions . Typically, you MUST configure these settings with appropriate values in the [general] section of sip.conf: nat, canreinvite, externhost or externip, and localnet.`
`16:02.20`	`Ionic`	`I guess we can rule out networking issue pretty much as I'm in a local network`
`16:02.28`	`WIMPy`	`Ionic: Checht that ^`
`16:02.35`	`Ionic`	`WIMPy: I'm not NATed`
`16:02.42`	`Ionic`	`At least not currently`
`16:02.52`	`WIMPy`	`Ionic: All phones and Asterisk on the same LAN?`
`16:02.57`	`Ionic`	`Yep`
`16:03.03`	`Ionic`	`Calls incoming via ISDN`
`16:03.11`	`Ionic`	`Laptop (SIP client) in my LAN`
`16:03.34`	`joobie`	`does your LAN to LAN calling have this issue?`
`16:03.46`	`WIMPy`	`Ionic: Do you have any nat support enabled on the clients? Like STUN?`
`16:03.46`	`Ionic`	`Nope, this works fine`
`16:03.50`	`Ionic`	`Yeah`
`16:04.02`	`Ionic`	`I'm using a dynamic user with nat=yes`
`16:04.15`	`Ionic`	`Cause I'm using the same stuff when I'm mobile too`
`16:04.27`	`WIMPy`	`Enabling STUN usually does more harm than good.`
`16:04.42`	`Ionic`	`I can see stun.c messages in the debug log`
`16:04.48`	`Ionic`	`Guess I'll try to turn it off`
`16:05.00`	`WIMPy`	`You have stun enabled on Asterisk even?`
`16:05.29`	`Ionic`	`Not sure, that's what I'm checking`
`16:05.30`	`WIMPy`	`You should only do that if you are behind nat and on a dynamic IP.`
`16:06.14`	`Ionic`	`Hm I can't find any reference`
`16:07.06`	`Ionic`	`But I'm seeing those messages: [Jan 7 16:51:33] DEBUG[568766] stun.c: Runt Attribute (got 3, expecting 4)`
`16:11.11`	`WIMPy`	`You should definitely get rid of that.`
`16:12.49`	`Ionic`	`A codec problem is unlikely, right?`
`16:13.00`	`Ionic`	`i.e. ISDN card is using ulaw whilst SIP clients use alaw`
`16:13.02`	`WIMPy`	`yes`
`16:13.42`	`Ionic`	`Hm`
`16:13.43`	`WIMPy`	`Why don't you change the codec to match?`
`16:15.20`	`portnov`	`.`
`16:15.38`	`portnov`	`Q: are incomming Jingle calls supposed to work in * ?`
`16:16.36`	`fenrus`	`"incoming jingle calls" ?`
`16:16.42`	`fenrus`	`please describe what you mean`
`16:20.11`	`*** join/#asterisk hehol (~Adium@2a01:198:71d:0:21f:d0ff:fea1:568e)`
`16:24.16`	`Ionic`	`Hm ok`
`16:24.26`	`Ionic`	`Limiting to ulaw seems to work`
`16:24.43`	`*** join/#asterisk TimeRider (steve@188-220-34-144.dsl.cnl.uk.net)`
`16:24.53`	`Ionic`	`Weird`
`16:25.04`	`WIMPy`	`Yes.`
`16:25.07`	`Ionic`	`asterisk should be able to do the conversion flawlessly`
`16:25.16`	`WIMPy`	`It should be able to transcode.`
`16:25.33`	`Ionic`	`Or maybe I was just lucky it worked this time`
`16:25.52`	`Ionic`	`Hm dunno :p`
`16:25.59`	`Ionic`	`I'll test some more tomorrow`
`16:41.26`	`portnov`	`fenrus: I try to call to asterisk via xmpp/jingle (using pidgin). * receives some XMPP messages, but does not interpret them as incomming call.`
`16:45.08`	`*** join/#asterisk xgoethe (~xgoethe@213.Red-88-9-3.dynamicIP.rima-tde.net)`
`16:45.22`	`xgoethe`	`hi there`
`16:45.56`	`xgoethe`	`anyone knows if there is a replacement in asterisk 1.8 similar to AgentLoginCallback?`
`17:02.21`	`*** join/#asterisk CheBuzz (~CheBuzz@71-221-185-234.bois.qwest.net)`
`17:02.51`	`CheBuzz`	`Anybody know what asterisk services listen on UDP ports 15650, 15651, 13006 and 13007?`
`17:11.11`	`CheBuzz`	`Odd, I had asterisk listening on that port, but when I restarted it, it is now only listening on 5060 and 4569, as I would expect. Anybody know why that would happen?`
`17:14.27`	`*** join/#asterisk resist0r (~resist0r@69.31.131.51)`
`17:15.17`	`*** join/#asterisk vpopov (~happylife@dyn-58-35.fttbee.kis.ru)`
`17:16.10`	`*** join/#asterisk francisvgarcia (~networker@186.1.68.198)`
`17:16.24`	`*** join/#asterisk timahvo1 (~rogue@197.178.105.175)`
`17:22.48`	`kaldemar`	`CheBuzz: were those actually ports that asterisk listened to, and not just UDP connections. by default ports 10000-20000 are used for RTP.`
`17:22.52`	`*** join/#asterisk oliver1 (~oliver@manz-590f2020.pool.mediaWays.net)`
`17:23.48`	`CheBuzz`	`Those were ports I saw in "netstat -ulpn", and there were no calls active at the time.`
`17:29.15`	`kaldemar`	`well, nothing listens on those ports unless you configure asterisk to.`
`17:35.07`	`*** join/#asterisk Tim_Toady (~fuzzy@195.74.247.28.dsl.dyn.forthnet.gr)`
`17:35.42`	`*** part/#asterisk CheBuzz (~CheBuzz@71-221-185-234.bois.qwest.net)`
`17:35.51`	`*** join/#asterisk irroot (~gregory@41.49.233.193)`
`17:36.25`	`*** part/#asterisk irroot (~gregory@41.49.233.193)`
`18:00.12`	`*** join/#asterisk stackevil (~marvin@unaffiliated/stackevil)`
`18:00.36`	`*** part/#asterisk stackevil (~marvin@unaffiliated/stackevil)`
`18:06.17`	`*** join/#asterisk resist0r (~resist0r@69.31.131.51)`
`18:34.57`	`*** join/#asterisk PoWeRKiLL (~powerkill@87.68.246.10.adsl.012.net.il)`
`18:40.57`	`*** join/#asterisk godmachine-x6 (~poorelanc@funtoo/user/godmachine-x6)`
`18:56.47`	`*** join/#asterisk GGD (~deberle@pool-173-72-204-39.clppva.fios.verizon.net)`
`19:00.03`	`*** join/#asterisk brah (c82b2429@gateway/web/freenode/ip.200.43.36.41)`
`19:00.31`	`brah`	`Question regarding T1 lines. They're claimed to be 1.544 Mbps`
`19:00.38`	`brah`	`Is that one thousand Mbps, or one and a half Mbps?`
`19:05.29`	`[TK]D-Fender`	`One and a half`
`19:06.11`	`[TK]D-Fender`	`Otherwise you'd have seen 1.544 Gbps`
`19:11.14`	`brah`	`And then I'd be wondering if it was a thousand Gbps (unplausible, heh) or one and a half Gbps`
`19:13.02`	`carrar`	`I'd like to upgrade my T1 to 1.544 Gbps pls k thanks`
`19:25.10`	`*** join/#asterisk Ast001 (~uros@cable-89-216-178-236.dynamic.sbb.rs)`
`19:28.39`	`Ast001`	`hello did anyone try atcom ip02 device ? It has uClinux os and ancient Asterisk version and can connect to fxo and fxs line. I have this device. I prefer to configure it in configuration files via ssh access and it works like I want for sometime but then it seems that it overwrites my changes and revert to configuration from GUI. Does anyone have any experiance with it ?`
`19:29.37`	`p3nguin`	`I always write 1 when I mean 1000.`
`19:29.59`	`p3nguin`	`"I'll sell you my car for just 1 dollar."`
`19:42.27`	`*** join/#asterisk GGD (~deberle@pool-173-72-204-39.clppva.fios.verizon.net)`
`19:47.55`	`*** join/#asterisk resist0r (~resist0r@69.31.131.51)`
`19:58.53`	`*** join/#asterisk timahvo1 (~rogue@41.90.214.75)`
`20:06.56`	`*** join/#asterisk xgoethe_ (~xgoethe@172.Red-88-9-10.dynamicIP.rima-tde.net)`
`20:07.36`	`*** join/#asterisk godmachine-x6 (~poorelanc@funtoo/user/godmachine-x6)`
`20:08.24`	`*** join/#asterisk gerhard7 (~gerhard7@82-168-115-40.ip.telfort.nl)`
`20:09.41`	`*** part/#asterisk Ast001 (~uros@cable-89-216-178-236.dynamic.sbb.rs)`
`20:14.16`	`*** join/#asterisk hipitihop (~denis@122.150.58.211)`
`20:31.12`	`*** join/#asterisk evil_gordita (robert@ip70-188-50-186.rn.hr.cox.net)`
`20:49.15`	`*** join/#asterisk Defraz (~Defraz@corp.fuzecore.com)`
`21:29.45`	`*** join/#asterisk Ionic (ionic@ionic.de)`
`21:32.33`	`*** join/#asterisk Abraham13 (4cd17887@gateway/web/freenode/ip.76.209.120.135)`
`21:33.02`	`Abraham13`	`what's up gang`
`21:34.39`	`*** join/#asterisk dandre (~daniel@ble59-2-81-56-122-47.fbx.proxad.net)`
`21:35.43`	`Abraham13`	`Anyone know of a way to integrate the Call Detail Records on a trixbox 2.8 PBX platform to Quickbooks? I'd like to automate billing for our finance department as much as possible`
`21:55.44`	`Abraham13`	`Or, if not Quickbooks, perhaps A2Billing? Not sure if A2Billing integrates with trixbox CDR data.`
`21:56.06`	`*** join/#asterisk ferdna (~ferdna@cpe-67-10-220-35.elp.res.rr.com)`
`21:59.41`	`fenrus`	`~trixbox`
`21:59.42`	`infobot`	`Trixbox is unable to be supported here. It is a closed-source distribtuion of Asterisk and FreePBX containing proprietary code that its users do not have access to, making it difficult to support. Try joining #trixbox and asking your questions there.`
`22:04.26`	`*** join/#asterisk corretico (~luis@190.211.93.11)`
`22:04.58`	`Abraham13`	`thank you, I will do that.`
`22:05.44`	`Abraham13`	`before I leave, a quick question. Which open-source PBX platforms would you all recommend?`
`22:05.58`	`[TK]D-Fender`	`Asterisk`
`22:06.47`	`Abraham13`	`good answer, that should be the captcha for signup`
`22:07.25`	`fenrus`	`we ran asterisk with a2billing last world scout jamboree for prepaid telephony :)`
`22:14.26`	`*** join/#asterisk TimeRider (steve@188-220-34-144.dsl.cnl.uk.net)`
`22:35.11`	`*** join/#asterisk fisted (~fisted@unaffiliated/fisted)`
`22:45.01`	`*** join/#asterisk SeRi (~wtf@c-76-31-169-54.hsd1.tx.comcast.net)`
`22:58.25`	`F2Knight`	`fenrus, how did you like a2billing? Personally I think it sucks. but never found anything else OSS so ended up writing my own`
`22:58.44`	`F2Knight`	`work in progress still`

Generated by irclog2html.pl Modified by Tim Riker to work with infobot.