| 00:06.34 | *** join/#asterisk bkruse (~Adium@fl-71-52-125-108.dhcp.embarqhsd.net) |
| 00:28.26 | *** join/#asterisk ruben231 (~OpenDial@112.198.90.58) |
| 00:33.43 | ruben231 | hi guys anyone can help regarding this issue..? -----> http://pastebin.com/nF6xTUQx two of my asterisk server being peered are sending fake auth rejection from each other how do i overcome this.thanks |
| 00:35.30 | [TK]D-Fender | It isn't an issue. It's what * does to avoid "discovery". |
| 00:35.44 | [TK]D-Fender | And it's documented in the sample sip.con. Read it. |
| 00:40.00 | ruben231 | <PROTECTED> |
| 00:41.49 | ruben231 | [TK]D-Fender: any help please.... |
| 00:42.48 | *** join/#asterisk luckman212 (~luckman21@unaffiliated/luckman212) |
| 00:44.29 | [TK]D-Fender | [19:35][TK]D-FenderAnd it's documented in the sample sip.con. Read it. |
| 00:46.35 | *** join/#asterisk timahvo1 (~rogue@197.237.174.93) |
| 00:47.21 | *** part/#asterisk ruben231 (~OpenDial@112.198.90.58) |
| 00:51.10 | *** join/#asterisk Phirum (~Phirum@unaffiliated/eyesec) |
| 00:56.35 | *** join/#asterisk jasonwert (~w3rt@71.89.137.28) |
| 01:00.20 | *** join/#asterisk tedstriker (~tedstrike@host-135-196-33-208.lines.viateldsl.com) |
| 01:10.47 | *** join/#asterisk vlad_starkov (~vlad_star@109.188.125.32) |
| 01:18.41 | *** join/#asterisk felipealmeida (~user@177.40.149.115) |
| 01:22.43 | *** join/#asterisk jpoz (~jpoz@c-24-22-121-42.hsd1.or.comcast.net) |
| 01:24.38 | *** join/#asterisk bkruse (~Adium@172.56.27.2) |
| 01:48.46 | *** join/#asterisk gartral (~gartral@unaffiliated/gartral) |
| 02:02.41 | *** join/#asterisk tedstriker (~tedstrike@host-135-196-33-208.lines.viateldsl.com) |
| 02:05.00 | *** join/#asterisk timahvo1 (~rogue@197.237.174.93) |
| 02:19.18 | *** join/#asterisk vlad_starkov (~vlad_star@109.188.125.32) |
| 02:30.09 | *** join/#asterisk darkbasic (~quassel@niko.linuxsystems.it) |
| 02:47.57 | *** join/#asterisk vlad_starkov (~vlad_star@109.188.125.176) |
| 02:59.22 | *** join/#asterisk luckman212 (~luckman21@unaffiliated/luckman212) |
| 03:04.33 | *** join/#asterisk tedstriker (~tedstrike@host-135-196-33-208.lines.viateldsl.com) |
| 03:14.37 | *** join/#asterisk jploh (~textual@49.146.185.139) |
| 03:48.41 | *** join/#asterisk vlad_starkov (~vlad_star@109.188.125.166) |
| 04:00.40 | *** join/#asterisk D30 (~deo@58.71.19.178) |
| 04:05.42 | *** join/#asterisk tedstriker (~tedstrike@host-135-196-33-208.lines.viateldsl.com) |
| 04:48.42 | *** join/#asterisk vlad_starkov (~vlad_star@109.188.125.218) |
| 04:54.52 | *** join/#asterisk charkee (~charkee@122.55.36.17) |
| 05:48.46 | *** join/#asterisk vlad_starkov (~vlad_star@109.188.125.242) |
| 05:54.16 | xandrix | [TK]D-Fender: turns out voipms was having slight issues with the montreal servers for a fiew moments i switched to montreal2 and it fixed the problem |
| 06:32.27 | *** join/#asterisk LiuYan (~LiuYan@211.154.128.133) |
| 06:35.51 | Penguin | You can log in and look at the issues tracker to find out things like that. |
| 06:43.58 | *** join/#asterisk zpotoloom (~tom@tom.data.ee) |
| 06:48.43 | *** join/#asterisk vlad_starkov (~vlad_star@109.188.125.198) |
| 07:28.33 | lnb | how does one tell what codec is being used? |
| 07:33.21 | kaldemar | by looking at *Format lines in "core show channel <channel>" output. |
| 07:46.49 | *** join/#asterisk gerhard7 (~gerhard7@77-172-47-159.ip.telfort.nl) |
| 07:47.00 | *** join/#asterisk jhlavacek (~jirka@78.208.220.3) |
| 07:48.42 | *** join/#asterisk vlad_starkov (~vlad_star@109.188.125.32) |
| 08:18.44 | *** join/#asterisk darkbasic (~quassel@niko.linuxsystems.it) |
| 08:23.42 | *** join/#asterisk yago (~kresp0@gateway/tor-sasl/kresp0) |
| 08:33.14 | *** join/#asterisk threesome (~threesome@customer-79-127-150-148.net.angelnet.cz) |
| 08:36.00 | *** join/#asterisk apb1963 (~quassel@174.134.232.101) |
| 08:50.58 | *** join/#asterisk luckman212 (~luckman21@unaffiliated/luckman212) |
| 09:00.55 | *** join/#asterisk Chainsaw (~chainsaw@gentoo/developer/chainsaw) |
| 09:04.11 | *** join/#asterisk twanny796 (~twanny@c67-109.i07-17.onvol.net) |
| 09:06.04 | twanny796 | hello asterisk, I need an initialization string for a GSM Nokia 22 modem, any help please? |
| 09:09.21 | *** join/#asterisk camelot (~chatzilla@ise1092603.lnk.telstra.net) |
| 09:10.17 | *** join/#asterisk luckman212 (~luckman21@unaffiliated/luckman212) |
| 09:12.39 | *** join/#asterisk admin0 (~admin0@2a00:ec8:404:1127:a402:b5b6:e27b:fbb8) |
| 09:13.00 | admin0 | anyone using a2billing here with asterisk .. can someone tell me some hints on how to enable + signup |
| 09:13.05 | admin0 | *sign |
| 09:13.53 | camelot | is a orange bunny |
| 09:15.16 | camelot | is bigears |
| 09:16.31 | camelot | Hi All |
| 09:18.54 | *** join/#asterisk tzafrir (~tzafrir@local.xorcom.com) |
| 09:19.08 | *** part/#asterisk camelot (~chatzilla@ise1092603.lnk.telstra.net) |
| 09:34.28 | admin0 | hey |
| 09:35.45 | *** join/#asterisk luckman212 (~luckman21@unaffiliated/luckman212) |
| 09:35.48 | *** join/#asterisk hehol (~Adium@2a01:198:71d:0:40e8:b210:b650:73bd) |
| 09:35.55 | *** join/#asterisk Neoti (~Thunderbi@cpc5-nott16-2-0-cust33.12-2.cable.virginm.net) |
| 09:37.47 | *** join/#asterisk luckman212 (~luckman21@unaffiliated/luckman212) |
| 09:41.46 | *** join/#asterisk luckman212 (~luckman21@unaffiliated/luckman212) |
| 10:02.33 | *** join/#asterisk Draecos (~Draecos@58-7-60-116.dyn.iinet.net.au) |
| 10:47.09 | *** join/#asterisk camelot (~chatzilla@ise1092603.lnk.telstra.net) |
| 10:47.18 | camelot | Hi |
| 10:47.55 | camelot | Can anyonr help with AST 12 trunk setup |
| 10:55.59 | admin0 | i am bombarded with No value given for outbound proxy in line 0 if sip.conf .. anyone knows how to fix .. using asterisk + a2billing on ubuntu 12.04 lts |
| 11:10.45 | *** join/#asterisk amizraa (~amizraa@gateway/tor-sasl/amizraa) |
| 11:11.10 | *** join/#asterisk gerhard7 (~gerhard7@77-172-47-159.ip.telfort.nl) |
| 11:15.31 | *** join/#asterisk netadmin (~mueddib@fsf/member/okaratas) |
| 12:07.39 | *** join/#asterisk mjordan (~matt@75.76.55.191) |
| 12:07.39 | *** mode/#asterisk [+o mjordan] by ChanServ |
| 12:15.09 | *** join/#asterisk ruben231 (~OpenDial@112.198.79.250) |
| 12:15.27 | ruben231 | hi guys.. |
| 12:19.23 | ruben231 | guys any can suggest somehow how to resolve this issue for my asterisk server ------> http://pastebin.com/x9r6H1NJ |
| 12:22.01 | kaldemar | what issue? |
| 12:23.58 | *** join/#asterisk vlad_starkov (~vlad_star@109.188.125.153) |
| 12:28.51 | *** part/#asterisk morfin (~morfin@morfin.telenet.ru) |
| 12:29.06 | ruben231 | kaldemar: this http://pastebin.com/x9r6H1NJ <--------------------- is flooding on my asterisk CLI> how do i remove this |
| 12:32.23 | *** join/#asterisk vlad_starkov (~vlad_star@109.188.125.153) |
| 12:39.23 | *** join/#asterisk axelm7 (~axelm7@201.254.79.219) |
| 12:39.42 | kaldemar | ruben231: drop/reject traffic from the ip address it is coming from. |
| 12:40.24 | kaldemar | ruben231: that NOTICE does not show the originating address, but the security log will if you have it enabled. |
| 12:40.57 | ruben231 | kaldemar: there is no originating Ip only the IP of my asterisk server, hwo do i cehck the IP of teh source..? |
| 12:42.39 | axelm7 | Hi everyone, good morning from Argentina. I want to buy an E1 card for my Asterisk PBX. Any recommendations? |
| 12:43.11 | axelm7 | What |
| 12:43.33 | ruben231 | kaldemar: any idea please..? |
| 12:44.01 | axelm7 | What's the difference between the Digium cards and the clones, besides the 250 dollar price diff? |
| 12:46.03 | *** join/#asterisk Draecos (~Draecos@58-7-60-116.dyn.iinet.net.au) |
| 12:54.28 | kaldemar | ruben231: i just told you. if you have security log enabled in logger.conf, it will contain lines that have the originating ip. |
| 12:58.04 | ruben231 | kaldemar: sorry, how do i enable it on logger.conf |
| 12:58.15 | ruben231 | and where to see it when its enable |
| 12:58.36 | axelm7 | A clone E1 PCIe card costs about 170 and a Digium TE133 costs 495 |
| 12:59.09 | axelm7 | what's the advantage of getting the Digium card? |
| 13:02.55 | mjordan | (1) Support. |
| 13:03.21 | mjordan | (2) We didn't knock someone else's IP off to make a product. Do you really want to buy something that someone had to copy? |
| 13:03.45 | kaldemar | ruben231: http://svn.asterisk.org/svn/asterisk/tags/12.0.0/configs/logger.conf.sample |
| 13:04.06 | mjordan | (3) Some of your money goes towards funding the Asterisk project. Cloners: highly unlikely. |
| 13:04.07 | kaldemar | ruben231: see under [logfiles] |
| 13:04.10 | mjordan | shrugs |
| 13:04.20 | mjordan | otherwise, yay capitalism? |
| 13:07.37 | ruben231 | kaldemar: im suing asterisk 1.8 somehow |
| 13:08.58 | *** join/#asterisk amessina (~amessina@2001:470:c1dc:7779:d6be:d9ff:fe8d:7c1e) |
| 13:09.31 | kaldemar | ruben231: then you don't have the security event framework that would make to log entries. so forget about the security log. see sip debug for the address or addresses and block it in your firewall. |
| 13:31.04 | *** join/#asterisk protocoldoug (~doug@unaffiliated/protocoldoug) |
| 13:31.10 | *** join/#asterisk thecardsmith (~doug@unaffiliated/protocoldoug) |
| 13:32.29 | *** join/#asterisk charkee (~charkee@122.55.36.17) |
| 13:36.31 | axelm7 | mjordan, thanks for your answer. Where can I read about the difference between a TE133 and a TE121? |
| 13:39.32 | axelm7 | I know the TE133 is the current generation and that TE121 is discontinued, but there are some deals on refurbed TE121 on eBay that might make sense depending on the technical difference between both products |
| 13:41.56 | kippi | hey |
| 13:42.15 | kippi | can I push a rtp stream to another server that accepts rtp streams? |
| 13:42.23 | *** join/#asterisk vlad_starkov (~vlad_star@109.188.125.140) |
| 13:59.08 | *** join/#asterisk felipealmeida (~user@179.210.237.70) |
| 14:09.58 | axelm7 | reading further, TE133 includes hw echo cancellation while in TE121 it is optional, requiring a VPMOCT032 Echo Cancellation Module |
| 14:11.15 | axelm7 | how important is this echo cancellation hw? is a sw implementation available? how big is the quality difference? |
| 14:14.00 | *** join/#asterisk yago (~kresp0@gateway/tor-sasl/kresp0) |
| 14:15.48 | *** join/#asterisk calum_ (~calum_@cpc4-harg5-2-0-cust371.7-1.cable.virginm.net) |
| 14:20.59 | *** join/#asterisk brad_mssw (~brad@shop.monetra.com) |
| 14:22.00 | *** join/#asterisk luckman212 (~luckman21@unaffiliated/luckman212) |
| 14:27.14 | *** join/#asterisk mjordan (~matt@nat/digium/x-eprkijcvmcfzxrbv) |
| 14:27.14 | *** mode/#asterisk [+o mjordan] by ChanServ |
| 14:40.47 | *** join/#asterisk IMS77 (~IMS77@srvmail.castel.fr) |
| 14:45.36 | *** join/#asterisk kannan (~chatzilla@123.238.229.237) |
| 14:47.44 | *** join/#asterisk axelm7 (~axelm7@201.254.79.219) |
| 14:47.50 | *** part/#asterisk axelm7 (~axelm7@201.254.79.219) |
| 14:47.53 | *** join/#asterisk axelm7 (~axelm7@201.254.79.219) |
| 14:59.10 | *** join/#asterisk jrose_atDigium (~jrose_atD@nat/digium/x-dsbmnfvgbaeezwww) |
| 15:03.51 | *** join/#asterisk thecardsmith (~doug@unaffiliated/protocoldoug) |
| 15:05.23 | *** join/#asterisk timahvo1 (~rogue@197.237.174.93) |
| 15:17.10 | *** join/#asterisk gtjoseph (~gtjoseph@unaffiliated/gtj) |
| 15:23.01 | *** join/#asterisk Vutral (~ss@mirbsd/special/Vutral) |
| 15:24.52 | *** join/#asterisk putnopvut (~putnopvut@asterisk/master-of-queues/mmichelson) |
| 15:24.52 | *** mode/#asterisk [+o putnopvut] by ChanServ |
| 15:28.43 | *** join/#asterisk leedm777 (~leedm777@nat/digium/x-gbjiljmwlaldzpkb) |
| 15:47.16 | *** join/#asterisk Katty (~Katty@97-91-121-70.static.stls.mo.charter.com) |
| 15:48.41 | IMS77 | Hi, I've got a question : a phone A call a phone B using SIP through Asterisk. |
| 15:49.50 | drmessano | Answer: Yes/no/yes |
| 15:52.29 | *** join/#asterisk apb1963 (~apb@174.134.232.101) |
| 15:52.39 | xandrix | damn thats one wide range of ips i should allow for my cell phone to be able to conect to my asterisk server |
| 15:55.33 | *** join/#asterisk jasonwert (~w3rt@75-134-81-98.static.aldl.mi.charter.com) |
| 15:58.18 | *** join/#asterisk scouture (~scouture@unaffiliated/scouture) |
| 16:00.42 | IMS77 | Hi, I've got a question : a phone A call a phone B using SIP through Asterisk. |
| 16:00.42 | IMS77 | Asterisk send an INVITE to B. I want to be able to make an operation if after 5 sec I've got no response (200 OK) from B. |
| 16:00.42 | IMS77 | A will send a new REGISTER |
| 16:01.38 | Penguin | What does REGISTER have to do with INVITE? |
| 16:01.47 | IMS77 | Dial() is the good option ? |
| 16:02.31 | *** join/#asterisk zerick (~eocrospom@190.187.21.53) |
| 16:02.35 | IMS77 | sorry I made a keyboard error |
| 16:03.28 | IMS77 | A will send a new REGISTER after the treatment |
| 16:04.04 | IMS77 | B will send a new REGISTER after the treatment |
| 16:04.09 | IMS77 | not A |
| 16:04.10 | *** join/#asterisk rrittgarn1 (~rrittgarn@75-150-221-196-Illinois.hfc.comcastbusiness.net) |
| 16:04.40 | IMS77 | and I have to call B with maybe a new IP address |
| 16:05.12 | IMS77 | should I use dial() to get no answer from invite |
| 16:05.35 | Penguin | Dial() makes the INVITE. |
| 16:05.55 | *** join/#asterisk imox (~imox@p4FC5C6DB.dip0.t-ipconnect.de) |
| 16:06.16 | IMS77 | yes but how to distinguish if B has not responded to the INVITE or if B has not answer ? |
| 16:06.58 | Penguin | That's how it already works. |
| 16:07.20 | xandrix | Penguin: question for ya in regards to what would be the better solution should i allow the network block my cell phone is on in asterisk or should i rather vpn in to my network from my phone and connect that way ? |
| 16:07.27 | Penguin | If A does Dial(SIP/B), and B is not there, A will do something else. |
| 16:08.16 | Penguin | xandrix: That's up to you to decide. Do you want to open up SIP to that entire netblock? |
| 16:08.31 | xandrix | well battery usage wise id rather not haveto vpn with my phone :P |
| 16:08.50 | Penguin | I guess you know your answer. |
| 16:08.55 | xandrix | indeed |
| 16:09.04 | xandrix | i still also haveto solve that nat issue for clients outside of my lan |
| 16:09.24 | Penguin | What's to solve? Configure asterisk correctly to work with phones behind NAT. |
| 16:09.57 | xandrix | it is setup that way i believe its a rule in my fw |
| 16:10.16 | Penguin | Don't block UDP 5060. |
| 16:10.22 | xandrix | i dont |
| 16:10.32 | xandrix | its the odd thing where people can hear me but i cant hear them |
| 16:10.33 | Penguin | Don't block the RTP range, usually 10000-20000 (or whatever is in rtp.conf). |
| 16:10.50 | xandrix | rtp is also unblocked from 10000 to 30000 just in case in my fw |
| 16:11.07 | Penguin | Does rtp.conf say to use 10000-30000? |
| 16:11.16 | drmessano | and externhost/externip and localnet |
| 16:11.35 | xandrix | drmessano: only externhost in my case since i have a dynamic ip |
| 16:11.50 | Penguin | Yep, you've got to specify the exterhost or externaddr AND the localnet. |
| 16:11.55 | xandrix | Penguin: no and i just readjusted the fw rule in consequence its now set to udp from 10000 to 20000 |
| 16:12.04 | xandrix | that was done aswell |
| 16:12.09 | drmessano | You dont use externhost AND externip |
| 16:12.18 | xandrix | scratches head thinking he probably forgont something really stupid as usual |
| 16:12.36 | drmessano | But you do need localnet |
| 16:12.37 | Katty | hi kids |
| 16:13.01 | drmessano | and I would allow UDP AND TCP for SIP, because TCP on your phone is going to be better on the battery |
| 16:13.14 | drmessano | Hi Katty |
| 16:13.16 | Penguin | But then you have to configure the phone to use TCP. |
| 16:13.26 | Penguin | But then you have to configure asterisk to use TCP. |
| 16:13.33 | xandrix | thats an interesting side note drmessano and Penguin |
| 16:13.34 | drmessano | Um yep |
| 16:13.41 | Katty | hugs drmessano |
| 16:13.45 | Katty | Penguin: you get any snow? |
| 16:14.00 | drmessano | licks the Kattys cheek |
| 16:14.11 | drmessano | Oh err sorry |
| 16:14.14 | Katty | drmessano: germs. |
| 16:14.19 | Penguin | katty: Yep! It looks like maybe half an inch of snow out there. I didn't go out for the official reading. |
| 16:14.35 | drmessano | What is this "snow" you speak of? |
| 16:14.45 | Penguin | Surely you've seen it on movies. |
| 16:14.54 | Katty | it's this cold, icky, white stuff |
| 16:14.59 | Katty | wait. |
| 16:15.05 | Katty | i better rephrase that. this IS drmessano |
| 16:15.08 | drmessano | You mean like Snow that sings that Informer song? |
| 16:16.15 | drmessano | Katty, did you watch much Beavis and Butthead? |
| 16:17.09 | Katty | no. |
| 16:17.22 | Katty | i think i tried, at one point, but decided it was a stupid comedy and then lost interest |
| 16:17.22 | drmessano | Then my reference will be lost |
| 16:17.26 | Katty | nods sadly |
| 16:17.31 | Katty | yes most likely |
| 16:17.46 | Penguin | What happened to their comeback? I was looking forward to that. |
| 16:17.47 | *** join/#asterisk Pullphinger (~Pullphing@12.40.23.68) |
| 16:18.02 | drmessano | Penguin, there was no Snookie or Jwoww in it |
| 16:18.05 | Penguin | I saw a few new episodes and then they were gone again. |
| 16:18.06 | drmessano | So the kids hated it |
| 16:18.35 | Penguin | shakes his fist |
| 16:18.45 | xandrix | Penguin: i should have something along these lines in general for my scenario to work right ? http://pastebin.com/mvj4P7w4 i took out the register part just for well privacy reasons |
| 16:18.54 | drmessano | They LITERALLY had a total meltdown because 30 minutes of the day on MTV didn't feature a Jersey Shore cast member |
| 16:19.00 | drmessano | Fscking kids |
| 16:19.55 | *** join/#asterisk sruffell (~sruffell@asterisk/the-kernel-guy/sruffell) |
| 16:19.55 | *** mode/#asterisk [+o sruffell] by ChanServ |
| 16:20.28 | xandrix | and i think one of my 2 permit rules is useless if i have set localnet |
| 16:20.57 | IMS77 | @Penguin: ok A does Dial(SIP/B, timeout) with a timeout for the INVITE. If I need to set an other timeout for the complete call, I will use the option S(), right or wrong ? |
| 16:20.57 | IMS77 | Is there a way to wait for the next REGISTER (with a loop) if the INVITE fail ? |
| 16:20.58 | Penguin | xandrix: Does deny/permit work in the general section? |
| 16:21.03 | Katty | hugs rrittgarn1 |
| 16:21.04 | Katty | oh |
| 16:21.09 | Katty | hugs sruffell too |
| 16:21.16 | Katty | sruffell: happy new year |
| 16:21.19 | Katty | rrittgarn1: free hugs! |
| 16:21.34 | sruffell | thanks! you too. |
| 16:21.41 | xandrix | Penguin: i thought it did cuz up until i enabled my cells networks i couldnt connect to it from outside |
| 16:21.49 | xandrix | goes back to reading apparently |
| 16:22.35 | Penguin | I've never put it in the general section. It seems like, if it works at all, it will apply that specific ACL to _every_ peer entry you create. That's probably not the desired effect. |
| 16:22.51 | xandrix | oooh |
| 16:22.56 | Penguin | deny/permit creates an ACL, and specifically an ACL for peers. |
| 16:23.08 | xandrix | ok so the way i did it it applys to all peers |
| 16:23.28 | Penguin | If it does anything, that's what I would guess it does. I never tried that. |
| 16:23.33 | xandrix | and thats not the desired / proper way of doing so so i should specify an acl on a per peer basis |
| 16:24.06 | Penguin | If you look in the sample sip.conf, you probably won't see deny/permit in the general section. |
| 16:24.14 | xandrix | indeed |
| 16:24.22 | xandrix | still has the no sound on his side issue ... |
| 16:24.28 | xandrix | scratches head again |
| 16:24.56 | Katty | xandrix: have you tried a sacrafice of beer and christmas cookies? |
| 16:25.08 | xandrix | Katty: i will consider it :P |
| 16:25.10 | Penguin | Be sure the remote phone is not trying to be clever with NAT. Disable ALL NAT traversal mechanisms on the client device. |
| 16:25.16 | Katty | xandrix: ^_^ |
| 16:25.26 | Katty | xandrix: sam adams has a lovely winter lager this time of year that goes pretty well with cookies |
| 16:25.28 | xandrix | Katty: does gin work ? |
| 16:25.33 | Katty | not really :< |
| 16:25.42 | Penguin | That includes any SIP settings on the client router. |
| 16:25.45 | xandrix | haha i <3 gin but ill get canadian beer :P |
| 16:25.58 | Penguin | And never forward ports on the client network. |
| 16:26.40 | xandrix | Penguin: i do not have access to said router since im using my cell phones providers internet not wifi |
| 16:27.06 | Penguin | I was referring to any plastic routers in the path. |
| 16:27.20 | Penguin | I know you don't have access to the ISP's equipment. |
| 16:27.46 | Katty | mmm plastic |
| 16:28.18 | xandrix | Penguin: ill check the options in csipsimple on my phone i dont seem to have anything nat related enabled on it |
| 16:28.45 | Penguin | ICE, STUN, another one that I can't remember the name of |
| 16:29.12 | Penguin | I use cSipSimple. Let me take a look in it. |
| 16:30.52 | Penguin | ICE, STUN, TURN |
| 16:30.57 | *** join/#asterisk mcf3782 (~Adium@adsl-065-012-184-148.sip.asm.bellsouth.net) |
| 16:31.07 | xandrix | ice and stun are disabled where is TURN ? |
| 16:31.07 | Penguin | I wanted to call it TRAP and I knew that wasn't right. |
| 16:31.27 | Penguin | TURN is lower down that same menu section, below ICE and STUN. |
| 16:31.31 | *** part/#asterisk piffey (~pfe@c-98-208-91-98.hsd1.ca.comcast.net) |
| 16:32.00 | IMS77 | If a phone A does Dial(SIP/B, timeout), the timeout is for the ringing not to get if the INVITE has been received (not catching 200 OK). How could I make a difference between both. Maybe the phone B is ringing but not anwering... I can't wait the complete timeout to make my treatment. |
| 16:32.21 | xandrix | i might have a diff version in my case i have ice stun and under stun there is the setting for the stun server but no turn |
| 16:32.24 | xandrix | maybe i should update it |
| 16:33.00 | Penguin | Disable the SDP NAT rewrite, STUN for Media, and the ICE and TURN settings if they exist. |
| 16:33.27 | xandrix | currently everything in nat traversal setting is disabled |
| 16:33.32 | xandrix | sdp nat rewrite ? |
| 16:33.38 | Penguin | I'm using 1.02.00 r2330 |
| 16:34.16 | xandrix | same here o.o |
| 16:35.26 | xandrix | ok now im really confused |
| 16:36.20 | mcf3782 | Over the weekend, I had to replace a power supply in box that's running Asterisk, and has a Digium TDM400 card in it. Now this box is logging 30 - 50 of these messages a night "ioctl: Start OnHookTrans, card 0". They're all between 0100 and 0330 local time. There are no users on this system during that time. The message comes from dahdi/linux/drivers/dahdi/wctdm.c |
| 16:37.27 | xandrix | Penguin: i am confused that we have the same version yet 2 options you have mentioned i cannot find o.O |
| 16:38.22 | mcf3782 | It's in a 'case' called "DAHDI_ONHOOKTRANSFER". I'm not exactly following what that code section is doing… Could this be related to problem with the new power supply? The TDM400 card does have a Molex connector on it for a power supply connector to be plugged into. |
| 16:38.29 | xandrix | oh haha forgot to tick expert mode |
| 16:38.37 | xandrix | Penguin: nothing in nat traversal is on currently |
| 16:39.05 | Chainsaw | mcf3782: The power supply would only affect FXS ports. Do you have any FXS modules on that card? |
| 16:39.40 | mcf3782 | Chainsaw: Yes. That card has one FXS and one FXO daughter card on it. |
| 16:40.36 | Chainsaw | mcf3782: Time to reseat things. Modules on card, card in slot, molex on card. |
| 16:40.42 | Penguin | xandrix: https://plus.google.com/108318415346798689734/photos/photo/5964337682069530066/p/pub |
| 16:42.00 | xandrix | 404 |
| 16:42.26 | Penguin | Now why would google do that? |
| 16:42.56 | Chainsaw | Do a 404? Clearly because you're not allowed to tell us that. |
| 16:42.57 | mcf3782 | Chainsaw: OK. That's the first thing I did. :) |
| 16:42.59 | xandrix | shrugs |
| 16:43.50 | Penguin | I understand what the 404 means, but the question is why would they not allow me to share the photo? |
| 16:43.53 | Chainsaw | mcf3782: I have seen BT automated line testing make the driver angry before (took *months* of hammering the bug report until someone committed the patch), does it happen without the FXO connected to the telco? |
| 16:44.35 | Chainsaw | Penguin: Because clearly you're trying to share a trade secret. |
| 16:44.56 | xandrix | lol |
| 16:48.02 | mcf3782 | Chainsaw: Hadn't thought to leave the line unplugged and see if that changes anything… I can test that tonight easy enough. Good idea! :-) It's just odd that I never saw this message until the power supply fan died and I had to put in a new power supply. |
| 16:48.09 | xandrix | Penguin: i hadto enable expert mode to see the parameters you mentioned and they are all off so i am really at a loss haha |
| 16:48.32 | Penguin | xandrix: I guess it's time to start looking at the SIP debug to see why your settings are not doing the job. |
| 16:48.34 | Chainsaw | mcf3782: The act of replacing the power supply may have meant moving the case. |
| 16:48.45 | xandrix | yeah i guess hehe |
| 16:49.44 | mcf3782 | Moving the case? |
| 16:49.51 | mcf3782 | Not sure I follow you there…. |
| 16:50.30 | drmessano | You had to open it, right? |
| 16:50.33 | drmessano | and move stuff around? |
| 16:50.37 | Chainsaw | mcf3782: You replaced a power supply. That may have involved moving the case and thus the cabling. |
| 16:50.41 | *** join/#asterisk felipealmeida (~user@179.210.237.70) |
| 16:50.43 | drmessano | Vibration |
| 16:50.48 | drmessano | Movement |
| 16:50.48 | drmessano | Banging |
| 16:50.59 | Chainsaw | mcf3782: If it is a rackmount, that would be the moment that you move the telephone cable a bit, and bite straight into it with the rack runners as you put it back. |
| 16:52.12 | *** join/#asterisk ruben231 (~OpenDial@112.198.79.250) |
| 16:52.14 | mcf3782 | It's a rack mounted case. I took the top off of it, removed the 4 screws for the power supply, unplugged all the psu cables from the motherboard, drives, etc. Put in the new psu, plugged in all the cables, put the cover back on. |
| 16:52.28 | drmessano | ..... |
| 16:53.04 | xandrix | Penguin: you gave me a trick the other day to read the sip debug in a more easy fashion and i forgot it |
| 16:53.07 | drmessano | If you think that involved no movement whatsoever.. |
| 16:53.25 | *** join/#asterisk Vutral (ss@mirbsd/special/Vutral) |
| 16:53.48 | mcf3782 | Ahh.. So you're suggesting that it could be a cable problem with the cable that's plugged into that fxs port. |
| 16:54.02 | *** join/#asterisk ChannelZ-Wk (~bobm@spark.idolum.com) |
| 16:54.57 | drmessano | No |
| 16:55.11 | Penguin | xandrix: Hmm. I don't know what that would have been. I don't do anything special. I make sure my scrollback lines are enough, core set verbose 3, sip set debug on, and make the call. |
| 16:56.15 | mcf3782 | I checked that everything was securely connected after these messages showed up the first night. But it's trivial to replace cables. The case isn't on sliders, so it's doubtful that the cable got pinched. |
| 16:56.28 | drmessano | The suggestion is that when you're inside a piece of equipment moving stuff around that other things may shift, even just a little. Contacts only need to move microscopically from a spot thats connected to a spot thats oxidized for a problem to occur. Opening the case and changing out a component is all it takes |
| 16:57.00 | *** join/#asterisk felipealmeida (~user@179.210.237.70) |
| 16:57.04 | *** join/#asterisk newtonr (~newtonr@nat/digium/x-hykliynwmtgafxab) |
| 16:57.05 | *** mode/#asterisk [+o newtonr] by ChanServ |
| 16:57.29 | mcf3782 | drmessano: Oh yea, I get that. :) |
| 16:57.53 | drmessano | Reseat, repeat |
| 16:58.02 | drmessano | Verify |
| 16:58.06 | drmessano | Inspect |
| 16:58.17 | drmessano | Check cables again |
| 16:58.37 | Chainsaw | Intermittent problems like this... |
| 16:58.50 | Chainsaw | Generally grounding issues. Make sure any "big" power plugs are fully home. |
| 16:59.18 | mcf3782 | I'll take the box down tonight after the users are gone, and give everything another once over. I did that the first night the messages showed up; but can't hurt to verify it again, just to be thorough.. |
| 16:59.45 | Chainsaw | What I can tell you from a good decade of running servers... |
| 16:59.50 | Chainsaw | The worst thing you can do to a box is power it off. |
| 17:00.00 | mcf3782 | amen to that |
| 17:00.32 | drmessano | 20kw broadcast transmitters hate that too |
| 17:00.40 | drmessano | and their power supplies |
| 17:01.01 | mcf3782 | I was 1 day short of a year and a half of uptime on this box, when the psu fan ate itself. :( |
| 17:01.30 | xandrix | hmm maybe my scrollback lines arent enough currently hehe any particular little messages i should look for in this ? http://pastebin.com/Ge4qS6UG |
| 17:01.31 | Qwell | My ex never understood why I would freak out when my computer would get turned off while I wasn't home. It's because I smoked in my office, and the HDs would seize, and never spin back up. :( |
| 17:01.45 | Chainsaw | Qwell: Stiction is never pretty. |
| 17:03.04 | mcf3782 | drmessano: Yea. I was on the engineering staff for a 25kw FM and a 2kw AM station for a few years. We hated having to shut the transmitters off for any reason. |
| 17:03.39 | drmessano | Especially if its a Harris transmitter |
| 17:03.57 | mcf3782 | They were both Harris. :) |
| 17:04.22 | mcf3782 | Not new digital ones either. |
| 17:04.34 | *** join/#asterisk threesome (~threesome@ip-94-113-13-143.net.upcbroadband.cz) |
| 17:05.14 | drmessano | They've only gotten worse |
| 17:05.15 | mcf3782 | The AM one was worse than the FM. You practically had to beg it to start back up again if it was down for more than about 20 minutes. |
| 17:06.11 | Chainsaw | I can only think of one that's worse. Atomic clocks. |
| 17:06.35 | drmessano | Our AM isn't too bad. Pretty much all the FMs either arc and blow out feedthru caps or blow a plate blocker when they're down for over an hour |
| 17:06.59 | xandrix | Penguin: i dont see anything weird |
| 17:07.00 | Chainsaw | Those PSUs *will* self-destruct if the power goes off and comes back on with even a volt over. Bang. |
| 17:07.05 | *** join/#asterisk eppigy (~Dave@snugglenets.com) |
| 17:07.08 | eppigy | hello |
| 17:07.10 | eppigy | i am dave |
| 17:07.13 | xandrix | well that catches my eye anyways so ill keep digging through it i guess |
| 17:07.17 | mcf3782 | oooh.. I can't even begin to imagine what restarting an atomic clock is like.. That's gotta involve the sacrifice of small kitchen appliances or something.. :) |
| 17:07.21 | Chainsaw | Hello Dave. |
| 17:07.53 | Chainsaw | mcf3782: It's a dark-green 4U box which is built like a Sherman tank. |
| 17:07.57 | Chainsaw | mcf3782: Weighs roughly the same. |
| 17:08.16 | mcf3782 | heh |
| 17:09.21 | drmessano | I do know one thing thats even more volitale to restart |
| 17:09.24 | drmessano | A windows machine |
| 17:09.26 | drmessano | lol |
| 17:09.31 | eppigy | hello drmessano |
| 17:09.40 | mcf3782 | ROFL |
| 17:09.53 | drmessano | COME ONNNNNN WINDOWS. NO WHAMMYS.. NO WHAMMYS.. NO WHAMMYS.... |
| 17:09.57 | drmessano | Awwwwwwwwwwwwwwwww |
| 17:10.05 | drmessano | Wermp Wermp Wermp |
| 17:10.09 | mcf3782 | Yea. But you have to restart a windows box every time you move the mouse across the screen. ;) |
| 17:10.26 | Chainsaw | *** STOP INACCESSIBLE BOOT DEVICE |
| 17:10.44 | Katty | well, since you don't like microsoft... |
| 17:10.45 | drmessano | I like how Windows 7 likes to install updates, then after it reboots, APPLY THE UPDATE |
| 17:10.51 | Katty | takes mcf3782's xbox from him |
| 17:10.54 | drmessano | What did I wait for PRIOR to the reboot?? |
| 17:11.08 | eppigy | that was just a staging run |
| 17:11.37 | eppigy | your box will be officialy broken upon reboot |
| 17:11.43 | mcf3782 | It's time for lunch for me. I'll take this box down tonight and give all the connections another good once over and see if it helps this problem. Thanks for the tips guys. |
| 17:11.51 | Chainsaw | Enjoy lunch. |
| 17:11.57 | Chainsaw | And report in with the results, of course. |
| 17:12.02 | mcf3782 | Katty - That would be difficult…since I don't have an xbox. :-D |
| 17:12.20 | mcf3782 | Chainsaw: Thanks. Will do. |
| 17:12.34 | mcf3782 | cd $KITCHEN; make lunch |
| 17:12.35 | drmessano | We run Windows 7 machines for our automation. I had one go rogue on me, middle of the day. Made the decision to reboot in, counting on 3 to 5 minutes of off-air time. The bastard took 7 minutes to install pending updates, then another 14 minutes to apply them after the reboot |
| 17:12.43 | drmessano | Off air for 21 minutes FOR A REBOOT |
| 17:13.04 | Chainsaw | What do they do in the interim? Hand you a guitar and a mic? |
| 17:13.29 | eppigy | you gotta use WSUS or w/e if youre gonna mess with windoze |
| 17:13.43 | drmessano | These machines aren't on a domain |
| 17:13.54 | *** part/#asterisk mcf3782 (~Adium@adsl-065-012-184-148.sip.asm.bellsouth.net) |
| 17:13.56 | eppigy | 8[] |
| 17:16.31 | drmessano | Chainsaw, we have a backup, but the backup, oddly enough, requires the primary to change sources from itself to the machine in the studio, so we can switch to "Emergency Control Room" mode |
| 17:16.49 | drmessano | Not very well designed |
| 17:18.36 | Chainsaw | drmessano: It just seems odd to me, running Windows in production. VMWare has seen the light recently. Perhaps there's hope for you too. |
| 17:19.05 | drmessano | Our automation software is all Windows based |
| 17:19.37 | Chainsaw | recoils in horror and averts his eyes |
| 17:19.50 | eppigy | y no puppet |
| 17:20.00 | drmessano | They even attempted to move from Netware to Linux many years ago for the DB servers, and went with Windows instead because Linux was too hard |
| 17:20.25 | Penguin | Been there. |
| 17:20.52 | eppigy | that is upsetting |
| 17:22.39 | *** join/#asterisk Vutral (~ss@mirbsd/special/Vutral) |
| 17:22.45 | xandrix | i think i am just to dumb to see my current issue xD |
| 17:22.47 | *** join/#asterisk [TK]D-Fender (~chatzilla@64.235.216.2) |
| 17:23.27 | eppigy | HELLO [TK]D-Fender |
| 17:23.47 | Penguin | xandrix: Oh. Right. You wanted me to look at the sip debug. |
| 17:24.12 | Chainsaw | Penguin: Sorry, we were being very distracting. |
| 17:24.17 | xandrix | Penguin: haha no biggie i dont want to force you to do so |
| 17:25.08 | xandrix | i might be missing a small bit i should reset my scroll lines in putty me thinks |
| 17:26.16 | [TK]D-Fender | eppigy: You ... are Dave |
| 17:26.22 | eppigy | yes |
| 17:26.24 | eppigy | YES |
| 17:26.29 | *** join/#asterisk luckman212 (~luckman21@unaffiliated/luckman212) |
| 17:26.31 | [TK]D-Fender | YES! |
| 17:26.50 | Penguin | xandrix: Create an extension that runs the echo test. Call it from your phone and see if you hear yourself when you talk. |
| 17:28.20 | Penguin | xandrix: And show me the whole sip.conf, masking ONLY your passwords. |
| 17:30.41 | *** join/#asterisk plantseeker (~Plantseek@77.240.63.97) |
| 17:31.27 | xandrix | Penguin: ok i just created the extension and reloaded the dialplan and i am about to paste my horrible sip.conf masking only my passwords |
| 17:31.42 | Penguin | Give the echo test a try first. |
| 17:31.53 | xandrix | i shall in about 2 seconds |
| 17:31.56 | Penguin | Just curious on the results of that. |
| 17:33.16 | xandrix | i used this example for the echo test http://www.voip-info.org/wiki/view/Asterisk+cmd+Echo and well i hear nothing at all |
| 17:33.22 | plantseeker | Hi can someone point me in the right direction? I have an intermittant issue with agents pausing in a queue. Running asterisk 1.8. I have tried google but so far I haven't been able to identify what areas to test. |
| 17:34.01 | Penguin | xandrix: okay |
| 17:35.37 | xandrix | Penguin: get ready for the horror :P http://pastebin.com/J3QeRgnG |
| 17:36.11 | Penguin | xandrix: Asterisk is on a LAN and you have forwarded 5060 and UDP 10000-20000 to asterisk's private address? |
| 17:36.35 | Penguin | You've still got the deny and permit in the general section. |
| 17:36.55 | xandrix | indeed i have yet to change that |
| 17:37.12 | xandrix | still had the same issue without those rules i had slapped it in temporarily so the bots would leave me alone |
| 17:37.50 | Penguin | xandrix: Which peer are you using for this? |
| 17:38.01 | Penguin | xandrix: voipms isn't behind nat. |
| 17:38.13 | xandrix | i am using roadster |
| 17:38.39 | Penguin | canreinvite was changed to directmedia some time ago. |
| 17:38.53 | xandrix | ooh |
| 17:38.53 | Penguin | Stop using insecure invite on your phones. |
| 17:39.21 | Penguin | Choose better contexts. |
| 17:39.23 | *** join/#asterisk g_r_eek (~g_r_eek@176.92.111.108) |
| 17:39.39 | Penguin | is getting the feeling someone didn't read The Book. |
| 17:40.40 | xandrix | just used examples ..... outdated ones at that to probably |
| 17:41.33 | xandrix | ok so change canreinvite to directmedia and remove insecure=invite from my peers ? |
| 17:41.39 | Penguin | I'm also wondering about the callerid values. You've put the names between angle brackets, which are for numbers. callerid=Your Name <12345> |
| 17:41.53 | xandrix | noted |
| 17:42.23 | Penguin | (1136.06) <Penguin> xandrix: Asterisk is on a LAN and you have forwarded 5060 and UDP 10000-20000 to asterisk's private address? |
| 17:42.32 | xandrix | yes |
| 17:42.47 | Penguin | And how about a firewall on the asterisk computer? |
| 17:43.07 | xandrix | well technicaly speaking the asterisk box is the firewall its running of my pfsense machine |
| 17:43.13 | Penguin | Oh. |
| 17:43.22 | Penguin | pfSense again... |
| 17:43.36 | xandrix | and just to make sure i should remove insecure=invite from all my peers right ? |
| 17:43.43 | drmessano | lol |
| 17:43.55 | drmessano | pfsense |
| 17:44.11 | Penguin | Your phones should auth, so remove insecure=invite from them. |
| 17:44.21 | *** join/#asterisk cmendes0101 (~cmendes01@office.phone.com) |
| 17:44.41 | Penguin | And if you'd use remotesecret instead of secret on your voipms peer, you could remove insecure from that one as well. |
| 17:45.01 | *** join/#asterisk scouture` (~scouture@unaffiliated/scouture) |
| 17:45.31 | Penguin | insecure=invite makes asterisk not require authentication in the invite. Hence "insecure." |
| 17:45.38 | xandrix | indeed |
| 17:45.43 | xandrix | ok well those changes have been applied |
| 17:46.11 | Penguin | So now you've got to concentrate on that stupid pfSense NAT. |
| 17:46.48 | xandrix | indeed |
| 17:47.36 | Penguin | If asterisk was listening on your public address, and there was no nat between the internet and asterisk, you wouldn't be experiencing this problem. |
| 17:47.39 | [TK]D-Fender | xandrix: your REGISTER must come at the end of [general] after all the other settings |
| 17:48.04 | [TK]D-Fender | xandrix: [voipms] (and all providers) should be "nat=no" |
| 17:48.19 | Penguin | The part about register statements is not true. |
| 17:48.39 | Penguin | You can put it anywhere in the general section. |
| 17:48.49 | Penguin | But it does have to be in the general section. |
| 17:48.52 | [TK]D-Fender | xandrix: permit=24.114.0.0/24.114.127.255 <- bad notaion for masks |
| 17:49.17 | xandrix | woops |
| 17:49.26 | [TK]D-Fender | Penguin: It used to literally cut off parsing of standard option below them |
| 17:49.37 | Penguin | He was supposed to delete those permits anyway. |
| 17:49.42 | *** join/#asterisk gerhard7 (~gerhard7@77.172.47.159) |
| 17:50.05 | Penguin | It never has since 1.4.18 (I think that's when I bothered to start using asterisk). |
| 17:50.19 | Penguin | You can put the register statements anywhere in the general section. |
| 17:50.38 | Penguin | The sample file demonstrates this. |
| 17:50.52 | [TK]D-Fender | I'd double-check the results for that... |
| 17:51.27 | [TK]D-Fender | -25C ... I think I'll reconsider that shopping run today.... |
| 17:51.28 | Penguin | I have several asterisks in production as we speak, and all of them have general settings after the register statements. I'm not just guessing. |
| 17:52.01 | *** join/#asterisk coppice (~chatzilla@123203240234.ctinets.com) |
| 17:52.16 | [TK]D-Fender | Penguin: I'd still consider it bad form even if they fixed the result it used to cause |
| 17:52.26 | Penguin | Just follow the sample. |
| 17:52.36 | [TK]D-Fender | Penguin: "hey, lets just shove this ANYWHERE". |
| 17:52.48 | xandrix | [TK]D-Fender: -38c here and i hadto walk a half hour to get to the bus so i could get to work :P |
| 17:52.50 | Penguin | That's how all the settings are put in. |
| 17:53.07 | [TK]D-Fender | xandrix: that's with windchill. |
| 17:53.11 | xandrix | si |
| 17:53.17 | [TK]D-Fender | xandrix: oui |
| 17:53.18 | xandrix | there is alot of wind in st-annes :P |
| 17:53.30 | Penguin | But it does make sense to group certain things together for ease of administration. |
| 17:53.44 | [TK]D-Fender | xandrix: Pierrefonds ain't much better... |
| 17:53.48 | xandrix | stares at his nat rules |
| 17:53.52 | xandrix | [TK]D-Fender: aggreed |
| 17:53.53 | coppice | its damned cold here too. its about 18C |
| 17:54.50 | [TK]D-Fender | goes to make breakfast |
| 17:56.49 | Penguin | here: -7.2C, wind chill -16.1 |
| 17:57.39 | coppice | here: 18C, no wind at all so wind chill 18C :-) |
| 17:58.44 | *** join/#asterisk jsjc (~Adium@197.Red-2-136-90.dynamicIP.rima-tde.net) |
| 17:59.47 | xandrix | stares at his outbound nat rules in confusion |
| 18:00.54 | *** join/#asterisk tenspeed705 (~keiths@goatfarm.vianet.ca) |
| 18:01.32 | Penguin | nat on $ext_if from $internal_net to any -> ($ext_if) |
| 18:01.39 | Penguin | How many do YOU have? |
| 18:08.32 | xandrix | that machine has an odd and complex setup i could post a screenshot of my outbound rules if youd like |
| 18:08.42 | Penguin | Go for it. |
| 18:08.48 | Penguin | But you really only need one nat rule. |
| 18:09.12 | Penguin | Just nat all internal addresses to the external address. |
| 18:09.14 | xandrix | Penguin: i have multiple lans on that machine so yes and no then again i could be completely wrong |
| 18:09.36 | Penguin | Do you have multiple LAN interfaces? |
| 18:09.40 | xandrix | yes |
| 18:10.03 | xandrix | essentialy lan 1 lan 2 lan 3 each have there respective interface / card |
| 18:10.22 | Penguin | But asterisk is on the pfSense box. NAT should not be involved there. You should NOT be using an rdr for the ports. Just pass them to the host. |
| 18:11.01 | *** join/#asterisk Kraln (~kraln@69.169.90.240) |
| 18:11.06 | Penguin | And be sure asterisk is listening to 0.0.0.0 and not the LAN address. |
| 18:11.15 | *** join/#asterisk bjornts (~BTS@it010226.klientdrift.uib.no) |
| 18:13.02 | xandrix | Penguin: if i dont specify bindaddr does it not default to 0.0.0.0 ? |
| 18:13.41 | Penguin | I have not tried to set up NAT with multiple LAN segments with separate interfaces, but I assume that one nat rule could be used or one nat rule for each segment if you'd like. |
| 18:14.02 | *** join/#asterisk Nugget (nugget@rennsport.macnugget.org) |
| 18:14.18 | Penguin | It should, yes. You can check it with sip show settings. |
| 18:14.24 | Penguin | <PROTECTED> |
| 18:14.27 | Penguin | for example |
| 18:15.15 | xandrix | in my case it is currently listening on 0.0.0.0:5060 |
| 18:15.20 | Penguin | Good. |
| 18:15.30 | Penguin | That includes the WAN address. |
| 18:15.49 | Penguin | Now just make sure pf isn't doing something it shouldn't be doing. |
| 18:15.58 | Penguin | Be sure there is no rdr for the asterisk ports. |
| 18:16.25 | Penguin | Redirect is for PORT FORWARDING. You don't forward to the local host. |
| 18:16.48 | Penguin | Forwarding goes to other hosts, simply passing in is what you use for the local host. |
| 18:17.21 | Penguin | And don't test my knowledge too much on pf. I do not use it every day. :/ |
| 18:17.39 | Penguin | And I don't know jack about pfSense. |
| 18:17.53 | Penguin | I've never used it at all that I can remember. |
| 18:19.04 | *** join/#asterisk zigg (~matt@unaffiliated/zigg) |
| 18:19.33 | xandrix | Penguin: i will test |
| 18:20.15 | xandrix | Penguin: if you wer a woman id take you out :P |
| 18:20.22 | Penguin | But I'm not... |
| 18:20.36 | xandrix | id still buy you a beer if i wer close :P |
| 18:21.22 | xandrix | remembers you saying where you wer from just cant remember where |
| 18:21.32 | Penguin | southern Illinois |
| 18:21.39 | Penguin | Near St. Louis, MO |
| 18:21.46 | xandrix | aaaah |
| 18:22.13 | xandrix | there should be a service on the internet called buy a buddy a beer so u could buy someone a beer even if u wer miles away |
| 18:22.21 | Penguin | They have that. |
| 18:22.26 | xandrix | o.O |
| 18:22.27 | Penguin | It's called "PayPal." |
| 18:22.32 | xandrix | hahaha yeah fair enough |
| 18:22.44 | xandrix | whats your addy and how much does a good beer go for down there ? |
| 18:23.31 | Penguin | Finding good beer is a bit difficult, but if you can, it's about $6 a pint. |
| 18:23.39 | xandrix | noted |
| 18:24.42 | Penguin | If you really want my paypal address, I can give it to you. |
| 18:24.47 | [TK]D-Fender | Because it has to be imported :) |
| 18:25.07 | *** join/#asterisk staykov (~wiggin@pdpc/supporter/active/staykov) |
| 18:25.10 | xandrix | [TK]D-Fender: i could actualy buy you a beer in person and same applies for you :P |
| 18:25.14 | Penguin | Because this is Anheiser-Busch country. :/ |
| 18:25.33 | xandrix | Penguin: well its to show my apreciation i really apreciate all the tips and the help you gave me |
| 18:25.37 | [TK]D-Fender | Penguin: You know what American beer and sex in a canoe have in common, right? |
| 18:25.48 | Penguin | Both taste like piss? |
| 18:25.53 | [TK]D-Fender | Penguin: They're both fucking close to water ;P |
| 18:25.57 | Penguin | heh |
| 18:27.40 | xandrix | so Penguin yes i would like your address :P |
| 18:27.50 | xandrix | * to have your |
| 18:28.23 | Penguin | sent in privmsg |
| 18:29.07 | [TK]D-Fender | Penguin: You'll have to drag your own ass up here for it, but you should know you've got another beer on me waiting :) |
| 18:29.26 | [TK]D-Fender | Penguin: You could grab Katty along the way and we'd have a party of it |
| 18:29.49 | Penguin | I'll keep that in mind if I'm ever planning a trip up that way. |
| 18:30.59 | *** join/#asterisk mattcen (~mattcen@c110-22-201-130.sunsh4.vic.optusnet.com.au) |
| 18:33.15 | *** join/#asterisk luckman212 (~luckman21@unaffiliated/luckman212) |
| 18:34.58 | *** join/#asterisk Weezey (~ohno@i.am.weezey.com) |
| 18:37.32 | *** join/#asterisk afournier (~admin@mx1.wisp-e.com) |
| 18:39.51 | *** join/#asterisk Weezey (~ohno@i.am.weezey.com) |
| 18:40.31 | *** join/#asterisk digiv (~digiv@as1.si.umich.edu) |
| 18:46.27 | *** join/#asterisk axelm7 (~axelm7@190.49.117.254) |
| 18:49.25 | *** join/#asterisk rfreire (~rfreire@189-46-60-189.dsl.telesp.net.br) |
| 18:49.36 | *** join/#asterisk jpoz (~jpoz@ec2-184-169-152-1.us-west-1.compute.amazonaws.com) |
| 18:52.22 | *** join/#asterisk anthm (~anthm@freeswitch/developer/anthm) |
| 18:53.10 | *** join/#asterisk ipengineer (~zconkle@static-71-252-134-63.dllstx.fios.verizon.net) |
| 18:56.00 | *** join/#asterisk chazzam (~chazz@donutokyo.info) |
| 18:57.08 | *** join/#asterisk jpoz (~jpoz@ec2-184-169-152-1.us-west-1.compute.amazonaws.com) |
| 18:57.58 | rfreire | Hello there, #asterisk! I'm in need of specific patch, r402604 | sgriepentrog | 2013-11-08 16:46:57 -0600 (Fri, 08 Nov 2013) | 19 lines |
| 18:58.01 | rfreire | <PROTECTED> |
| 18:58.02 | rfreire | --- |
| 18:58.18 | Qwell | rfreire: okay, so? |
| 18:58.39 | rfreire | Qwell, where can I find this specific 19-line patch? |
| 18:58.47 | Qwell | in svn |
| 18:59.12 | rfreire | Qwell, I've got a whole revision, with several patches, by http://svnview.digium.com/svn/asterisk/team/oej/rana-dtmf-duration-1.8/channels/chan_sip.c?r1=403287&r2=403286&pathrev=403287 |
| 18:59.29 | rfreire | Do you know how can I narrow down for that specific patch, Qwell? |
| 19:00.19 | rfreire | BTW: It is in order to address https://www.mail-archive.com/sipx-users@list.sipfoundry.org/msg02176.html |
| 19:00.30 | rfreire | Asterisk won't register to sipX ;-/ |
| 19:00.36 | rfreire | Reviewboard: https://reviewboard.asterisk.org/r/2988/ |
| 19:01.13 | ipengineer | Hello everyone! Any ideas why I cannot insert CALLERID into a custom cdr column name. I think it has something to do with the data needing to be escaped or something before insert: Set(CDR(c_clid_original)=${CALLERID(all)}) |
| 19:01.41 | xandrix | [TK]D-Fender: you mentioned something earlier about my permit rule not being correct and i was curious as is to what the proper syntax in that case would be ? i believe you said i used improper notation |
| 19:03.10 | rfreire | Qwell, any idea? |
| 19:04.02 | dijib | Penguin Are you around? |
| 19:05.10 | *** join/#asterisk gtjoseph (~gtjoseph@unaffiliated/gtj) |
| 19:05.10 | *** join/#asterisk elguero (~miguel323@2001:470:1f06:12c4::2) |
| 19:05.10 | *** join/#asterisk hardwire (~hardwire@cl-101.anc-01.us.sixxs.net) |
| 19:05.10 | *** join/#asterisk Wiretap (~wiretap@unaffiliated/wiretap) |
| 19:06.44 | drmessano | rfreire, https://code.asterisk.org/code/changelog/asterisk?cs=402604 <-- Click "View As Patch" |
| 19:06.50 | Penguin | dijib: I'll check. |
| 19:06.58 | rfreire | tries |
| 19:07.48 | Penguin | xandrix: address/netmask |
| 19:08.05 | *** join/#asterisk jpoz (~jpoz@ec2-184-169-152-1.us-west-1.compute.amazonaws.com) |
| 19:08.09 | Penguin | I think you had address/broadcastAddress |
| 19:08.23 | xandrix | oh crap i did |
| 19:08.26 | [TK]D-Fender | xandrix: your mask made no sense |
| 19:09.58 | xandrix | woops broke my config again |
| 19:10.04 | xandrix | getting 403 forbidden on my mobile haha |
| 19:10.52 | rfreire | drmessano++ |
| 19:10.55 | rfreire | Awesome |
| 19:11.10 | rfreire | Thanks a lot man!!! \o/ |
| 19:11.38 | drmessano | no probs |
| 19:11.59 | xandrix | typo |
| 19:16.16 | xandrix | [TK]D-Fender: i believe that in my case it should have been 255.255.0.0 right ? |
| 19:16.56 | [TK]D-Fender | xandrix: it would certainly look more sensible to allow a somewhat wide range from your provider's general viscinity |
| 19:17.51 | xandrix | [TK]D-Fender: well what i was planning on doing is allowing the entire block that fido uses for well where we are :P wich is technicaly a rogers block from what arin whois is telling me |
| 19:20.18 | xandrix | now that everything is working i should really get to making better contexts and cleaning up my configs after that ima reread the documentation on an autoattendant |
| 19:21.02 | Penguin | Did you get audio going? |
| 19:21.09 | xandrix | Penguin: si senior :P |
| 19:21.18 | Penguin | I guess I missed that part. |
| 19:21.20 | xandrix | thx to your tip on my rules i fixed it and it works |
| 19:21.33 | xandrix | *on my firewall rules |
| 19:21.37 | Penguin | You were doing a redirect instead of pass in? |
| 19:21.44 | xandrix | apparently so |
| 19:21.53 | xandrix | that was a huge fail on my part |
| 19:27.58 | *** join/#asterisk razu (~razu@195.222.7.33) |
| 19:30.07 | xandrix | so now i also have a wireless phone available when im home (i use my cell on wifi when i get home cuz i get no signal since im in abasement where every single wall is made in cement ... ) |
| 19:30.39 | [TK]D-Fender | Get a bigger antenna :) |
| 19:31.12 | xandrix | [TK]D-Fender: yeah or a repeater / booster |
| 19:31.19 | xandrix | but honestly meh :P |
| 19:31.22 | *** join/#asterisk calum_ (~calum_@cpc4-harg5-2-0-cust371.7-1.cable.virginm.net) |
| 19:31.30 | xandrix | i have voip now and it solved the problem |
| 19:31.35 | [TK]D-Fender | 15db = don't wanna have kids :) |
| 19:31.57 | xandrix | hahaha |
| 19:32.09 | xandrix | doesnt plan on having any anyways :P |
| 19:33.06 | xandrix | sometimes i wish i could negotioate with my isp and ask them to compromise 1mbps of down speed for 1 mbps more of upload |
| 19:35.31 | [TK]D-Fender | I'm fortunate to have FTTH and HDSL 12/10 to my apt |
| 19:36.04 | coppice | you need a nice balanced 1G up/1G down |
| 19:36.07 | [TK]D-Fender | xandrix: You could always go for a bonded connection |
| 19:51.17 | *** join/#asterisk jhlavacek (~jirka@87.89.218.63) |
| 19:56.32 | *** join/#asterisk _Corey_ (~chatzilla@50-200-184-54-static.hfc.comcastbusiness.net) |
| 19:57.07 | *** join/#asterisk dumby (~dumby@204.246.140.162) |
| 20:02.30 | *** join/#asterisk dumby (~dumby@204.246.140.162) |
| 20:04.26 | *** join/#asterisk apb1963 (~apb@174.134.232.101) |
| 20:07.39 | dijib | Penguin: what are you checking |
| 20:07.41 | dijib | ? |
| 20:19.02 | *** join/#asterisk bkruse (~Adium@172.56.26.252) |
| 20:26.03 | *** join/#asterisk zerick (~eocrospom@190.187.21.53) |
| 20:32.20 | *** join/#asterisk LiuYan (~LiuYan@222.125.137.85) |
| 20:32.21 | Penguin | (1304.02) <dijib> Penguin Are you around? |
| 20:32.23 | Penguin | (1306.49) <Penguin> dijib: I'll check. |
| 20:33.01 | *** join/#asterisk Ice_Strike (~Ice_Black@84.92.51.164) |
| 20:34.29 | *** join/#asterisk gerhard7 (~gerhard7@77-172-47-159.ip.telfort.nl) |
| 20:39.01 | *** join/#asterisk vlad_starkov (~vlad_star@109.188.125.140) |
| 20:43.39 | xandrix | [TK]D-Fender: i have fftn 10/1 |
| 20:43.45 | xandrix | *fttn |
| 20:44.08 | xandrix | on what seems to be adsl2+ |
| 20:44.55 | [TK]D-Fender | not quite the same... |
| 20:45.03 | [TK]D-Fender | but yeah, jsut beyond typical ADSL1 |
| 20:45.12 | *** join/#asterisk Kraln (~kraln@69.169.90.240) |
| 20:45.22 | [TK]D-Fender | Have you tested at that speed or is it simply what they list on the bill? |
| 20:47.49 | xandrix | list and tested 10 down is correct but for up its more like 768 |
| 20:47.54 | xandrix | 780 kbps |
| 20:51.55 | xandrix | and i forgot my cell phone at work .... |
| 20:52.04 | xandrix | l8z |
| 20:52.47 | *** part/#asterisk retentiveboy (~retentive@74-95-28-33-Atlanta.hfc.comcastbusiness.net) |
| 21:10.09 | *** join/#asterisk justdave (~dave@unaffiliated/justdave) |
| 21:15.46 | *** join/#asterisk jhlavacek (~jirka@87.89.218.63) |
| 21:16.17 | *** part/#asterisk rfreire (~rfreire@189-46-60-189.dsl.telesp.net.br) |
| 21:41.09 | *** join/#asterisk Chainsaw (~chainsaw@gentoo/developer/chainsaw) |
| 21:50.08 | *** join/#asterisk navaismo (~navaismo@189.191.246.129) |
| 21:56.55 | *** join/#asterisk Kraln (~kraln@69.169.90.240) |
| 22:06.02 | ipengineer | Any ideas why when trying to set a custom field in the CDR table the value being inserted is empty? Even though the verbose output shows that it is being SET correctly? http://paste.laravel.com/1jvN |
| 22:11.14 | navaismo | not me but you can take a look on the asterisk debug too see if the SQL Query(if you are on mysql) carry the value on the insert |
| 22:18.36 | ipengineer | navaismo: For whatever reason, even with debug set to 10 I am not seeing any insert statements for the CDR. |
| 22:18.45 | ipengineer | I do see all of the selects thought for Realtime |
| 22:20.22 | *** join/#asterisk zopsi (uid22708@gateway/web/irccloud.com/x-ijmrnpiwmrbewhbu) |
| 22:21.29 | *** join/#asterisk pa (~pa@unaffiliated/pa) |
| 22:24.43 | *** join/#asterisk Vutral (ss@mirbsd/special/Vutral) |
| 22:25.16 | Katty | looks in |
| 22:33.05 | navaismo | ipengineer, in your Master CSV is empty as well? |
| 22:37.26 | ipengineer | navaismo: I have cdv disabled.. I just went and tried to change it, restarted asterisk and it started working. Apparently you have to restart asterisk for any new columns to take affect |
| 22:39.41 | *** join/#asterisk tzafrir (~tzafrir@bzq-218-28-58.cablep.bezeqint.net) |
| 22:42.22 | *** join/#asterisk X-Rob_ (~Win7@unaffiliated/x-rob) |
| 22:43.04 | *** join/#asterisk reconwireless (uid10170@gateway/web/irccloud.com/x-gieziyjwfdmgwcfp) |
| 22:44.15 | *** join/#asterisk polysics (~Adium@host24-42-dynamic.41-79-r.retail.telecomitalia.it) |
| 22:44.28 | polysics | any particular caveats to go 11.6 > 11.7? |
| 22:46.45 | navaismo | changelog.txt |
| 22:46.46 | [TK]D-Fender | Only what you see in the tracker |
| 22:46.51 | Qwell | polysics: what does UPGRADE.txt say? |
| 22:47.06 | [TK]D-Fender | Changelog isn't a "caveat", that's what's FIXED |
| 22:47.15 | navaismo | ding ding ding reee |
| 22:47.30 | [TK]D-Fender | caveat is what is outstanding as BAD |
| 22:47.34 | [TK]D-Fender | GO read the tracker |
| 22:47.43 | [TK]D-Fender | polysics: Your system already crashes HARD. |
| 22:47.53 | [TK]D-Fender | polysics: This is not the time to be spineless. UPGRADE |
| 22:48.06 | polysics | that's totally true :P |
| 22:48.25 | polysics | nad I want to finally go back to work on my CSTA implementation |
| 22:48.34 | polysics | ops is not my job :( |
| 22:50.58 | *** join/#asterisk Ice_Strike (~Ice_Black@84.92.51.164) |
| 22:51.24 | *** join/#asterisk TimeRider (~steve@timerider.plus.com) |
| 22:52.11 | *** join/#asterisk dpeloquin (uid13057@gateway/web/irccloud.com/x-ulgochfcelgzstdt) |
| 22:52.32 | polysics | in the FreePBX context, I hope I don;t find out some functions it uses are now "dangerous", but at worst I can just live_dangerously |
| 22:53.30 | Ice_Strike | Is there any advantage using rabbitmq or alike for Asteriski AMI? |
| 22:56.20 | *** join/#asterisk reconwireless (uid10170@gateway/web/irccloud.com/x-tpjlxapdhkndwbki) |
| 22:59.16 | *** join/#asterisk GameGamer43 (sid5533@gateway/web/irccloud.com/x-ykhvfhlxsvlzabwa) |
| 22:59.46 | *** join/#asterisk ruben231 (~OpenDial@112.198.79.56) |
| 23:04.57 | *** join/#asterisk gtjoseph (~gtjoseph@unaffiliated/gtj) |
| 23:05.18 | *** join/#asterisk tonyclewis (uid6025@gateway/web/irccloud.com/x-kkqyjxyvhvmstnba) |
| 23:09.08 | *** join/#asterisk amizraa (~amizraa@gateway/tor-sasl/amizraa) |
| 23:11.44 | *** join/#asterisk Vutral (ss@mirbsd/special/Vutral) |
| 23:11.59 | navaismo | btw Happy New year all |
| 23:19.48 | *** part/#asterisk mjordan (~matt@nat/digium/x-eprkijcvmcfzxrbv) |
| 23:37.30 | *** join/#asterisk reconwireless (uid10170@gateway/web/irccloud.com/x-uzricdlubisgnxdv) |
| 23:47.57 | *** join/#asterisk zerick (~eocrospom@190.187.21.53) |