| 00:00.01 | *** join/#asterisk alexw (~textual@unaffiliated/alexw) |
| 00:03.37 | *** join/#asterisk file (~file@asterisk/developer-and-muffin-lover/file) |
| 00:03.38 | *** mode/#asterisk [+o file] by ChanServ |
| 00:25.39 | *** join/#asterisk Ron9 (~rp@185.9.7.195) |
| 00:26.14 | *** join/#asterisk sarlalian (~sarlalian@107.170.239.102) |
| 00:28.57 | *** join/#asterisk exuberocity (~exuberoci@107.45.182.22) |
| 00:42.43 | *** join/#asterisk saint_ (~saint_@gateway/vpn/privateinternetaccess/saint/x-59675695) |
| 00:43.08 | saint_ | hi all |
| 00:43.08 | saint_ | is there a way to troubleshot PrivacyManager ? |
| 00:43.37 | saint_ | Whenever i receive a call into it, and I push whatever option once the privacy manager calls me, it calls me back . so i have to enter the option twice basically before it executes my choice... |
| 00:45.44 | *** join/#asterisk robink_ (~quassel@unaffilated/robink) |
| 00:47.08 | *** join/#asterisk d00gster (~d00gster@ERMLON6511W-LP130-05-1177963037.dsl.bell.ca) |
| 00:59.00 | *** join/#asterisk gringo (~gringo@unaffiliated/gringo) |
| 01:04.35 | Get_The_Fish | So is there just no way to see commands set to the AMI? "manager set debug on" seems to do nothing. |
| 01:09.38 | saint_ | any idea ? |
| 01:20.36 | *** join/#asterisk exuberocity (~exuberoci@108.120.106.99) |
| 01:23.22 | *** join/#asterisk fstd_ (~fstd@unaffiliated/fisted) |
| 01:27.29 | *** join/#asterisk gringo (~gringo@unaffiliated/gringo) |
| 01:35.56 | *** join/#asterisk jasonwert (~jasonwert@71.89.137.28) |
| 01:36.47 | Get_The_Fish | saint I think you need to be more clear. I dont understand the issue. |
| 01:37.20 | Get_The_Fish | Or say it a different way so my dumbass can understand it :) |
| 01:49.11 | *** join/#asterisk camerin (hoax@elite.bshellz.net) |
| 01:59.10 | WIMPy | Get_The_Fish: IIRC you also need to enable general debug. |
| 02:00.05 | WIMPy | MAybe even at a higher level. But I have definitely seen the full AMI communication on the *CLI. |
| 02:02.40 | *** join/#asterisk bmurt (~brendan@pool-173-71-157-121.nrflva.fios.verizon.net) |
| 02:07.38 | Get_The_Fish | I'm not seeing it for whatever reason. No worries, its an older version, I'm not getting into it. |
| 02:08.12 | *** join/#asterisk italorossi (~Adium@179.211.186.236) |
| 02:18.03 | *** join/#asterisk vader- (~Adium@pool-173-49-160-70.phlapa.fios.verizon.net) |
| 02:41.08 | *** join/#asterisk darkbasic (~quassel@niko.linuxsystems.it) |
| 03:11.46 | *** join/#asterisk raspberrypifan (~raspberry@186.42.36.192) |
| 03:20.52 | *** join/#asterisk [TK]D-Fender (~joe@64.235.216.2) |
| 03:26.48 | *** join/#asterisk Dovid (~dovid@ool-4356e96f.dyn.optonline.net) |
| 03:41.21 | *** join/#asterisk gerhard7 (~gerhard7@77-172-82-111.ip.telfort.nl) |
| 04:00.03 | *** join/#asterisk DeVilSoulBlacK (~textual@186-79-77-193.baf.movistar.cl) |
| 04:03.46 | *** join/#asterisk simplydrew (~simplydre@unaffiliated/simplydrew) |
| 04:04.54 | *** join/#asterisk cranq (~crank@dua.tuxshells.com) |
| 04:30.36 | *** join/#asterisk happy-dude (uid62780@gateway/web/irccloud.com/x-axdtqddhqmlvtmxu) |
| 05:30.05 | *** join/#asterisk azerus (~badass@unaffiliated/badass) |
| 05:37.27 | *** join/#asterisk DragonAzul (~DragonAzu@187.208.21.48) |
| 05:43.07 | *** join/#asterisk babak (uid19622@gateway/web/irccloud.com/x-hsxyyzhmpztvhpfa) |
| 05:57.08 | *** join/#asterisk tparcina (~tomo@212.92.200.41) |
| 06:03.12 | *** join/#asterisk tzafrir (~tzafrir@bzq-179-40-172.cust.bezeqint.net) |
| 06:31.16 | *** join/#asterisk azerus (~badass@unaffiliated/badass) |
| 06:32.54 | *** join/#asterisk jeffspeff (~jeff@50.115.246.196) |
| 06:41.37 | *** join/#asterisk Panther_Modern (~Panther_M@unaffiliated/panther-modern/x-6168176) |
| 06:43.12 | *** join/#asterisk bulkorok (~Benjamin_@217.110.197.225) |
| 07:14.50 | *** join/#asterisk pchero_work (~pchero@109.70.54.56) |
| 07:19.16 | *** join/#asterisk areski (~areski@80.174.128.43.dyn.user.ono.com) |
| 07:19.41 | *** join/#asterisk hehol (~hehol@gatekeeper.loca.net) |
| 07:23.18 | madduck | is it possible somehow to convert an existing bridged call into a ConfBridge room? |
| 07:27.59 | *** join/#asterisk wonderworld (~ww@p5085908A.dip0.t-ipconnect.de) |
| 07:33.43 | *** join/#asterisk azerus (~badass@unaffiliated/badass) |
| 07:35.49 | jeffspeff | madduck, not that i've ever heard of |
| 07:36.54 | jeffspeff | by existing bridged call, i assume you are referring to a 3-way call initiated by the phone itself? |
| 07:37.10 | madduck | no |
| 07:37.16 | madduck | i mean a call bridged by asterisk |
| 07:37.19 | madduck | between two parties |
| 07:37.34 | madduck | say you and i are speaking, and now we decide that Jane should join |
| 07:37.44 | madduck | sure, we could use the functionality on the phones |
| 07:38.19 | madduck | but it seems that asterisk should allow me to do this too, e.g. convert the call into conf room 6543 and either tell Jane to dial-in or call her extension and invite her. |
| 07:42.49 | *** join/#asterisk sekil (~sekil@78.24.104.73) |
| 07:43.33 | *** join/#asterisk sekil (~sekil@78.24.104.73) |
| 07:55.05 | *** join/#asterisk wonderworld (~ww@p5085908A.dip0.t-ipconnect.de) |
| 07:58.03 | *** join/#asterisk Chainsaw (~chainsaw@gentoo/developer/chainsaw) |
| 08:04.46 | *** join/#asterisk riess82 (~riessma@91-113-4-247.adsl.highway.telekom.at) |
| 08:17.22 | *** join/#asterisk c0rnoTa (~c0rnoTa@109.188.126.8) |
| 08:23.06 | *** part/#asterisk c0rnoTa (~c0rnoTa@109.188.126.8) |
| 08:28.45 | madduck | can i set variables in a SIP stanza and then access them from the dialplan in the context where the SIP entity enters the dialplan? |
| 08:29.47 | WIMPy | You can transfer both patries to an extension sending them to ConfBridge. Via AMI you can do it in one operation. |
| 08:31.39 | WIMPy | Variables sei in sip.conf peers will be set on any channel originated from that peer. |
| 08:32.50 | *** join/#asterisk darkbasic (~quassel@niko.linuxsystems.it) |
| 08:34.16 | *** join/#asterisk CeBe (~CeBe@port-92-200-99-58.dynamic.qsc.de) |
| 08:34.41 | *** join/#asterisk azerus (~badass@unaffiliated/badass) |
| 08:41.30 | *** part/#asterisk riess82 (~riessma@91-113-4-247.adsl.highway.telekom.at) |
| 08:41.41 | madduck | i scanned all over https://wiki.asterisk.org/wiki/display/AST/Variables but could not find anything about accessing sip.conf variables :( |
| 08:43.17 | madduck | ftr, asterisk v12 seems to be able to create ad-hoc multiparty bridges: https://wiki.asterisk.org/wiki/display/AST/Bridges |
| 08:55.41 | babak | Hi, is there any web GUI that stores configuration in DB=Asterisk Realtime ? |
| 08:55.42 | madduck | aha |
| 08:55.54 | madduck | setvar=FOO=bar in sip.conf and ${FOO} in the dialplan |
| 08:56.16 | *** join/#asterisk kayatwork (~kayfox@orca.zerda.net) |
| 09:00.02 | *** join/#asterisk steelbrain (~steelbrai@182.187.57.175) |
| 09:03.00 | *** join/#asterisk D-Boy (~D-Boy@unaffiliated/cain) |
| 09:06.42 | *** join/#asterisk joat (~tim@ip70-160-158-40.hr.hr.cox.net) |
| 09:08.25 | *** join/#asterisk wonderworld (~ww@p5085908A.dip0.t-ipconnect.de) |
| 09:17.25 | *** join/#asterisk wonderworld (~ww@p5085908A.dip0.t-ipconnect.de) |
| 09:24.36 | *** join/#asterisk wonderworld (~ww@p5085958A.dip0.t-ipconnect.de) |
| 09:35.43 | *** join/#asterisk azerus (~badass@unaffiliated/badass) |
| 09:48.42 | *** join/#asterisk linocisco (~linocisco@193.134.242.12) |
| 09:48.52 | linocisco | hi all |
| 09:49.11 | linocisco | is that true (https://wiki.ubuntu.com/AsteriskSoundQuality) ? |
| 09:54.03 | *** join/#asterisk wonderworld (~ww@p508595B9.dip0.t-ipconnect.de) |
| 10:01.04 | *** join/#asterisk areski (~areski@221.Red-88-5-47.dynamicIP.rima-tde.net) |
| 10:18.49 | *** join/#asterisk wonderworld (~ww@p50858B89.dip0.t-ipconnect.de) |
| 10:32.41 | *** join/#asterisk darkbasic (~quassel@niko.linuxsystems.it) |
| 10:36.47 | *** join/#asterisk azerus (~badass@unaffiliated/badass) |
| 10:43.29 | *** join/#asterisk darkbasic (~quassel@niko.linuxsystems.it) |
| 10:51.32 | *** join/#asterisk wonderworld (~ww@p50859355.dip0.t-ipconnect.de) |
| 10:59.48 | *** join/#asterisk darkbasic (~quassel@niko.linuxsystems.it) |
| 11:08.40 | *** join/#asterisk Draecos (~Draecos@58-7-58-164.dyn.iinet.net.au) |
| 11:10.25 | *** join/#asterisk ketas (~ketas@226-209-191-90.dyn.estpak.ee) |
| 11:10.50 | *** join/#asterisk darkbasic_ (~quassel@niko.linuxsystems.it) |
| 11:37.35 | *** join/#asterisk thiagoc (~thiagoc@unaffiliated/thiagoc) |
| 11:37.45 | *** join/#asterisk azerus (~badass@unaffiliated/badass) |
| 11:46.31 | *** join/#asterisk [44] (~slackolog@unaffiliated/quintux) |
| 11:46.51 | *** join/#asterisk slackology__ (~slackolog@unaffiliated/quintux) |
| 12:03.01 | *** join/#asterisk fstd (~fstd@unaffiliated/fisted) |
| 12:03.01 | *** join/#asterisk MaliutaLap (nikolai@unaffiliated/maliuta) |
| 12:03.49 | *** join/#asterisk dan_j (sid21651@gateway/web/irccloud.com/x-momdjepqqxjovaay) |
| 12:04.43 | WIMPy | Don't know about their default installs, but surely, the gsm format as used in Asterisk is far from great. |
| 12:05.19 | *** join/#asterisk [TK]D-Fender (~chatzilla@216-191-106-163.dedicated.allstream.net) |
| 12:08.46 | *** join/#asterisk marlinc (~marlinc@ip2.weert.li.nl.cvo-technologies.com) |
| 12:09.34 | *** join/#asterisk sgriepentrog (sgriepentr@nat/digium/x-ainoiiikorbbdpmq) |
| 12:14.52 | *** join/#asterisk italorossi (~Adium@187.60.66.11) |
| 12:16.54 | *** join/#asterisk c0rnoTa (~c0rnoTa@109.188.126.65) |
| 12:17.00 | *** part/#asterisk c0rnoTa (~c0rnoTa@109.188.126.65) |
| 12:20.42 | [TK]D-Fender | babak: No. |
| 12:39.12 | *** join/#asterisk doome (~doome@82.150.48.146) |
| 12:40.03 | *** join/#asterisk camerin (hoax@elite.bshellz.net) |
| 12:40.04 | *** join/#asterisk Draecos (~Draecos@58-7-58-164.dyn.iinet.net.au) |
| 12:40.22 | *** join/#asterisk azerus (~badass@unaffiliated/badass) |
| 12:44.31 | *** join/#asterisk sgriepentrog (sgriepentr@nat/digium/x-pcadjjfxrfxsqxxo) |
| 12:55.49 | madduck | WIMPy: so yes, a blind transfer to the confbridge extension puts my peer into the conference, but then I am hung up and have to dial in. doable, but it would be nicer if I was also dropped into the conference (different extension would be ideal though to be able to mark the user etc.) |
| 13:00.02 | *** join/#asterisk wonderworld (~ww@p50859355.dip0.t-ipconnect.de) |
| 13:06.48 | WIMPy | madduck: Well, that doesn't work with modern technology any more. |
| 13:06.48 | madduck | what do you mean? |
| 13:07.01 | WIMPy | That functionality doesn't exist any more, |
| 13:08.06 | madduck | all that's needed is really something similar to the G Dial flag, i.e. disconnect the two channels and throw them into two contexts, upon press of a button like defined in features.conf |
| 13:08.16 | madduck | has this ever existed? |
| 13:08.45 | WIMPy | As I said, you can redirect both channel using AMI. |
| 13:09.11 | [TK]D-Fender | madduck: applicationmap feature + AMI Transfer |
| 13:10.16 | *** join/#asterisk camerin (hoax@elite.bshellz.net) |
| 13:10.23 | madduck | steep learning curve ahead, have not done anything with AMI so far |
| 13:11.04 | WIMPy | Noone says using Asterisk is going to be easy. |
| 13:11.43 | *** join/#asterisk jasonwert (~jasonwert@75-134-81-98.static.aldl.mi.charter.com) |
| 13:12.13 | WIMPy | What I haven't got a solution for is later breaking the conferenc again. |
| 13:13.07 | [TK]D-Fender | AMI Redirect* |
| 13:13.57 | WIMPy | But the calls are gone as far as the termional is concerned. |
| 13:15.05 | madduck | my fun already starts at having enabled = yes in manager.conf but no socket on port 5038 |
| 13:16.33 | madduck | https://wiki.asterisk.org/wiki/display/AST/AMI+Examples contains an example of what I want to do⦠|
| 13:17.49 | madduck | probably since i have no users defined yet |
| 13:17.52 | babak | thx ;Do you know any sample configuration 2 Asterisk using one shared (Realtime)database ? |
| 13:17.57 | [TK]D-Fender | WIMPy: Pretty sure you Have you restarted * completely? |
| 13:18.06 | [TK]D-Fender | oops |
| 13:18.16 | [TK]D-Fender | madduck: Have you restarted * completely? |
| 13:19.10 | *** join/#asterisk wonderworld (~ww@p50858BD7.dip0.t-ipconnect.de) |
| 13:19.14 | madduck | i didn't actually change manager.conf |
| 13:19.25 | madduck | it was enabled |
| 13:19.41 | madduck | http://slexy.org/raw/s2P292FBiv |
| 13:20.00 | madduck | [May 22 15:19:51] ERROR[1720]: config.c:1549 process_text_line: The file 'manager.d/*.conf' was listed as a #include but it does not exist. |
| 13:20.52 | madduck | not that it says anywhere how to create users, but ok ;) |
| 13:22.16 | WIMPy | As usual: See the sample configs. |
| 13:23.08 | madduck | debian installs the samples to /etc/asterisk *except* for manager.conf |
| 13:23.12 | madduck | found it now |
| 13:25.44 | madduck | [TK]D-Fender: ftr, no restart required. just manager reload and the socket appears with v11 |
| 13:26.04 | [TK]D-Fender | good.... |
| 13:27.15 | *** join/#asterisk bmurt (~brendan@pool-173-71-157-121.nrflva.fios.verizon.net) |
| 13:29.10 | *** join/#asterisk brad_mssw (~brad@66.129.88.50) |
| 13:42.50 | *** join/#asterisk elitas (~elitas@213.226.135.203) |
| 13:50.29 | *** join/#asterisk putnopvut (putnopvut@asterisk/master-of-queues/mmichelson) |
| 13:50.29 | *** mode/#asterisk [+o putnopvut] by ChanServ |
| 14:00.42 | *** join/#asterisk darkbasic (~quassel@niko.linuxsystems.it) |
| 14:02.51 | *** join/#asterisk rmudgett (rmudgett@nat/digium/x-iwiqpexwumyrnbbw) |
| 14:07.41 | *** join/#asterisk ThomasKeller (~Thomas@vmx.ethz.ch) |
| 14:08.36 | *** join/#asterisk bmurt (~brendan@pool-173-71-157-121.nrflva.fios.verizon.net) |
| 14:11.45 | *** join/#asterisk mjordan (mjordan@nat/digium/x-hhxagsvfniiacgjh) |
| 14:11.45 | *** mode/#asterisk [+o mjordan] by ChanServ |
| 14:12.24 | *** join/#asterisk davlefouAMD (~davlefouA@197.15.62.182) |
| 14:21.23 | *** join/#asterisk sekil (~sekil@78.24.104.73) |
| 14:28.40 | *** join/#asterisk exuberocity (~exuberoci@h94.241.130.174.static.ip.windstream.net) |
| 14:30.55 | *** join/#asterisk josecapurro (~jcapurro@190.52.189.6) |
| 14:39.14 | *** join/#asterisk wonderworld (~ww@p50858BD7.dip0.t-ipconnect.de) |
| 14:42.30 | *** join/#asterisk exuberocity (~exuberoci@h94.241.130.174.static.ip.windstream.net) |
| 14:46.52 | *** join/#asterisk vader- (~Adium@pool-173-49-160-70.phlapa.fios.verizon.net) |
| 14:52.13 | *** join/#asterisk pa (~pa@unaffiliated/pa) |
| 15:04.45 | *** join/#asterisk exuberocity (~exuberoci@h94.241.130.174.static.ip.windstream.net) |
| 15:18.47 | *** join/#asterisk mjordan (mjordan@nat/digium/x-cqvkabxvhbrjuqno) |
| 15:18.47 | *** mode/#asterisk [+o mjordan] by ChanServ |
| 15:26.12 | *** join/#asterisk camerin (hoax@elite.bshellz.net) |
| 15:52.14 | *** join/#asterisk rrittgarn (~rrittgarn@75-150-221-196-Illinois.hfc.comcastbusiness.net) |
| 15:59.53 | *** join/#asterisk roler (~roler@unaffiliated/roler) |
| 16:01.47 | *** join/#asterisk superscrat (asanders@nat/digium/x-tabsngycnzoelrpd) |
| 16:07.23 | *** join/#asterisk CptBurger (~Burger@198.0.100.225) |
| 16:10.52 | CptBurger | Hello! Anyone able to help me with a Resource List problem? |
| 16:11.45 | *** part/#asterisk roler (~roler@unaffiliated/roler) |
| 16:14.05 | *** join/#asterisk darkbasic (~quassel@niko.linuxsystems.it) |
| 16:14.33 | CptBurger | When my device (Panasonic Phone) tries to subscribe, I'm getting " Extension state subscription failed: Extension local does not exist in context 'rlist' or has no associated hint" |
| 16:14.45 | CptBurger | rlist is my list. |
| 16:17.31 | [TK]D-Fender | And it's telling you you're missing a hint in the dialplan for the item |
| 16:18.14 | CptBurger | im only seeing that |
| 16:18.29 | CptBurger | rlist has list items and the list items have hints |
| 16:18.40 | [TK]D-Fender | Show us all of the relevant configs |
| 16:18.42 | [TK]D-Fender | ~pb |
| 16:18.42 | infobot | A "pastebin" is a web-based service where you should paste anything over 3 lines so you don't flood the channel. Here are links to a few: http://www.pastebin.com, http://pastebin.ca, http://channels.debian.net/paste, http://paste.lisp.org, http://bin.cakephp.org/; or install pastebinit with yum or aptitude. |
| 16:18.44 | [TK]D-Fender | ^^^ |
| 16:19.26 | CptBurger | ty, one moment |
| 16:24.48 | CptBurger | http://pastebin.com/p4Sf3jGa |
| 16:25.33 | [TK]D-Fender | CptBurgerWhen my device (Panasonic Phone) tries to subscribe, I'm getting " Extension state subscription failed: Extension local does not exist in context 'rlist' or has no associated hint" |
| 16:25.45 | [TK]D-Fender | context = rlist <--------- |
| 16:25.57 | [TK]D-Fender | you don't have them where it is looking for them |
| 16:26.39 | CptBurger | I'm not sure why it thinks it should be looking at the rlist context? I dont have one of those |
| 16:27.18 | *** join/#asterisk mirton (~jazz@mirtoff.ru) |
| 16:28.02 | [TK]D-Fender | It's clearly using the name of the list as the context |
| 16:28.32 | CptBurger | oh ok, so my hints should be in an rlist context? |
| 16:29.33 | [TK]D-Fender | It is telling you explicitly that that is where it is looking... |
| 16:30.49 | CptBurger | yes and its also looking for extension "local" which i dont have defined in the list |
| 16:31.55 | CptBurger | im reviewing the sip messages to make sure they seem correct |
| 16:32.11 | CptBurger | according to this -> https://wiki.asterisk.org/wiki/display/AST/Resource+List+Subscriptions |
| 16:32.46 | *** join/#asterisk andresmujica (~andresmmu@ubuntu/member/andresmujica) |
| 16:34.20 | CptBurger | yes, my sip subscribe is good |
| 16:35.32 | [TK]D-Fender | Show it all.... |
| 16:43.54 | CptBurger | http://pastebin.com/kRkVaT5m <- Sip dialog |
| 16:43.59 | *** join/#asterisk steelbrain (~steelbrai@182.187.57.175) |
| 16:44.42 | CptBurger | I greatly appreciate your looking at this! |
| 16:45.57 | *** join/#asterisk italorossi (~Adium@187.60.66.11) |
| 16:46.01 | [TK]D-Fender | Hrm.... |
| 16:48.51 | *** join/#asterisk BBone_ (~Thunderbi@s75-157-233-55.bc.hsia.telus.net) |
| 16:52.13 | CptBurger | is that a good Hrm? or a bad Hrm? |
| 16:53.01 | [TK]D-Fender | "Not seeing why this is ahnnening hrm" |
| 16:53.07 | [TK]D-Fender | happening* |
| 16:54.40 | mjordan | "Extension state subscription failed: Extension local does not exist in context 'rlist' or has no associated hint" |
| 16:55.02 | CptBurger | yes... but why!? |
| 16:55.40 | mjordan | are you subscribing to a resource list? |
| 16:55.58 | CptBurger | trying to |
| 16:56.49 | mjordan | looks like you have a misconfiguration in your resource list. You probably have defined an extension state that you want to subscribe to in the list, but that extension state doesn't have a matching hint in the dialplan |
| 16:56.55 | CptBurger | http://pastebin.com/p4Sf3jGa <- PJSIP.conf and extensions |
| 16:57.28 | mjordan | hum. |
| 16:57.37 | mjordan | wonders why this is hitting res_pjsip_exten_state. |
| 16:57.39 | [TK]D-Fender | Context appears to tie to the listname, but the bigger myster is why it's looking for extension "local", when that's not in the list, or the request |
| 16:58.02 | mjordan | yeah. Really, it shouldn't be treating that SUBSCRIBE as one for extension state in the first place. |
| 16:58.09 | mjordan | looks at something |
| 16:59.09 | CptBurger | So yesterday, without any config changes the message was WARNING[3165] res_pjsip_exten_state.c: Extension rlist does not exist or has no associated hint |
| 16:59.23 | CptBurger | that was Asterisk 13.0.0 and pjsip 2.3 |
| 16:59.36 | CptBurger | today its 13.2.3 and pjsip 2.4 |
| 16:59.51 | CptBurger | 13.3.2 * |
| 17:01.09 | mjordan | CptBurger: pretty sure your list configuration is wrong. type should be 'resource_list', not 'list'. Which is definitely an error on the wiki page. |
| 17:01.35 | mjordan | did you get an error or a warning message when loading the config? |
| 17:01.57 | CptBurger | no, and there doesnt seem to be a cli command to check the status of resource lists |
| 17:02.08 | *** join/#asterisk BBone_ (~Thunderbi@s75-157-233-55.bc.hsia.telus.net) |
| 17:02.26 | mjordan | hm. Try changing it to 'resource_list' and see what happens. |
| 17:02.30 | *** join/#asterisk bmurt (~brendan@pool-173-71-157-121.nrflva.fios.verizon.net) |
| 17:02.49 | mjordan | and yeah. We've been wanting a 'pjsip show subscriptions' for some time. |
| 17:02.50 | mjordan | :-P |
| 17:03.01 | mjordan | alas, stuff & things keep blocking people on getting to it. |
| 17:03.03 | CptBurger | I now see and error about the resource list |
| 17:03.16 | mjordan | that's with a 'type=resource_list'? |
| 17:03.49 | CptBurger | yes |
| 17:03.51 | CptBurger | WARNING[10467]: res_pjsip_pubsub.c:731 retrieve_resource_list: Found resource list rlist, but its event type (presence) does not match SUBSCRIBE's (dialog) |
| 17:04.18 | CptBurger | stuff and things will do that |
| 17:04.49 | mjordan | yay |
| 17:04.52 | mjordan | well, that's progress |
| 17:06.11 | mjordan | unfortunately, right now, RLS only supports 'presence' and 'message-summary'. The SUBSCRIBE needs to match one of those two |
| 17:06.43 | CptBurger | so now my problem is with Panasonic... |
| 17:07.09 | *** join/#asterisk marlinc (~marlinc@ip2.weert.li.nl.cvo-technologies.com) |
| 17:07.45 | CptBurger | I see that the pjsip.conf.sample does indeed say type=resource_list, i should have double checked that |
| 17:08.01 | mjordan | well, the wiki docs being wrong certainly didn't help. Sorry about that |
| 17:08.45 | mjordan | Hum. |
| 17:08.49 | mjordan | ya know |
| 17:09.00 | mjordan | try setting the event to 'dialog' |
| 17:09.04 | mjordan | and see what happens |
| 17:10.33 | CptBurger | so that seemed to help |
| 17:10.47 | CptBurger | [May 22 13:10:14] NOTICE[10467]: res_pjsip_exten_state.c:337 new_subscribe: Extension state subscription failed: Extension local does not exist in context '824' or has no associated hint |
| 17:12.11 | mjordan | hm. And we're back to that. |
| 17:12.32 | mjordan | wonders if something got swapped around |
| 17:12.48 | CptBurger | its looking for list_items as contexts? |
| 17:13.14 | mjordan | nah, it actually is an error in the NOTICE message |
| 17:13.31 | mjordan | ast_log(LOG_NOTICE, "Extension state subscription failed: Extension %s does not exist in context '%s' or has no associated hint\n", |
| 17:13.31 | mjordan | endpoint->context, resource); |
| 17:13.42 | mjordan | will fix that |
| 17:14.21 | mjordan | what does 'dialplan show hints' show? |
| 17:14.24 | CptBurger | ok, so i have a subscriptions context included uin my local, i can move all of subscriptions to local and see if its happy with that |
| 17:14.32 | mjordan | er |
| 17:14.34 | mjordan | 'core show hints' |
| 17:15.42 | CptBurger | 816@rlist : PJSIP/4BCE-1 State:Unavailable Presence:not_set Watchers 0 |
| 17:15.42 | CptBurger | 817@rlist : PJSIP/48BE-1 State:Idle Presence:not_set Watchers 0 |
| 17:16.18 | CptBurger | dialplan show hints? You must be old skool |
| 17:16.29 | mjordan | no, just a bit slow from being off from work for a bit. |
| 17:16.42 | mjordan | So, what it shows in 'core show hints' is what it needs to match up with |
| 17:16.57 | mjordan | in your case, you'll want that to be 824@local |
| 17:17.35 | *** join/#asterisk anonymouz666 (~anonymouz@189-25-71-215.user.veloxzone.com.br) |
| 17:17.37 | CptBurger | oh derp, i made that change to rlist context earlier in this chat, right before you chimed in |
| 17:19.40 | CptBurger | there are no errors but still no watchers |
| 17:20.12 | CptBurger | im going to restart my phones and see |
| 17:20.18 | *** join/#asterisk Panther_Modern (~Panther_M@unaffiliated/panther-modern/x-6168176) |
| 17:26.45 | CptBurger | MAtt, I met you at Astricon 2014 and you introduced me to Mark as I wanted to shake the hand of the person who implemented RFC 4662. |
| 17:28.06 | mjordan | is it working now? :-D |
| 17:28.51 | file | IMPLEMENT NOTHING! |
| 17:30.01 | anonymouz666 | anyone knows if starpy (python lib to AMI) is python3-ready? |
| 17:30.36 | mjordan | anonymouz666: nope. |
| 17:30.42 | CptBurger | no more errors! |
| 17:30.46 | mjordan | anonymouz666: twisted does not support python 3 |
| 17:31.35 | anonymouz666 | I think the 15.2.0 is python3-aware |
| 17:31.45 | anonymouz666 | at least the changelog says |
| 17:31.48 | mjordan | huh |
| 17:31.51 | mjordan | that'd be pretty nice |
| 17:32.23 | mjordan | https://twistedmatrix.com/trac/milestone/Python-3.x |
| 17:32.29 | mjordan | looks like they still have a ways to go, but I could be wrong |
| 17:33.27 | CptBurger | asterisk[10467]: segfault at 78687940 ip 08212508 sp b65f7cc8 error 4 in asterisk[8048000+2a8000] |
| 17:33.34 | CptBurger | X-P |
| 17:33.41 | anonymouz666 | mjordan: I see |
| 17:33.48 | anonymouz666 | better stick to version 2.7 |
| 17:35.04 | mjordan | CptBurger: well, that's ungood. Can you get a backtrace? |
| 17:35.20 | mjordan | https://wiki.asterisk.org/wiki/display/AST/Getting+a+Backtrace |
| 17:42.11 | *** join/#asterisk thansen (~thansen@17.253.sfcn.org) |
| 17:42.50 | thansen | what's the best way to dial a bunch of extensions but not allow it to go to an extensions voicemail? |
| 17:43.02 | thansen | been a long time since I really messed with asterisk config.. |
| 17:44.21 | *** join/#asterisk wonderworld (~ww@ip-62-143-119-177.hsi01.unitymediagroup.de) |
| 17:44.37 | [TK]D-Fender | themrrobert: Dial a bunch of DEVICES |
| 17:44.47 | [TK]D-Fender | themrrobert: And don't call Voicemail afterwards |
| 17:45.30 | [TK]D-Fender | thansen: rather |
| 17:47.39 | thansen | [TK]D-Fender, ok makes sense...I'll give it a whirl real quick |
| 18:00.25 | CptBurger | @mjordan: It doesn't look like I have the -g option enabled :( |
| 18:02.14 | CptBurger | My list subscriptions appear to be working! Atleast I see the list sent to the device after a SUBSCRIBE! |
| 18:02.33 | CptBurger | Other problems that may be vendor related remain... mostly |
| 18:02.34 | CptBurger | [May 22 13:43:53] WARNING[11358]: res_pjsip_pubsub.c:2870 pubsub_on_rx_publish_request: No registered publish handler for event presence |
| 18:02.49 | CptBurger | since I have dialog messages |
| 18:09.13 | *** join/#asterisk MrSparks (~twanny@46.11.36.4) |
| 18:10.00 | MrSparks | I cannot see the session establishment with wireshark!!! |
| 18:10.38 | [TK]D-Fender | maybe you're looking wrong |
| 18:10.53 | [TK]D-Fender | maybe it isn't actually happening where you are looking |
| 18:10.55 | MrSparks | [TK]D-Fender, that's what I'm telling myself |
| 18:11.04 | [TK]D-Fender | maybe it's Maybeline |
| 18:11.30 | *** join/#asterisk bmurt (~brendan@pool-173-71-157-121.nrflva.fios.verizon.net) |
| 18:12.41 | MrSparks | my asterisk server is on 192.168.1.x and the laptop I am wiresharking from is 192.168.1.xx and I'm not seeing any sip protocol |
| 18:13.50 | MrSparks | I did sip in the filter and nothing comes up |
| 18:13.51 | [TK]D-Fender | perhaps your laptop's firewall is blocking it. |
| 18:15.32 | MrSparks | I put the firewall down, and still no sip. |
| 18:16.14 | [TK]D-Fender | If you say so... |
| 18:16.17 | CptBurger | MrSparks: Are you trying to troubleshoot a softphone? |
| 18:16.26 | CptBurger | That is on your laptop? |
| 18:16.48 | CptBurger | @mjordan: So this SIP presence dialog > http://pastebin.com/QMxRPV3q < says BAD Event to a Open / On the phone PUBLISH. Is this a because I set event=dialog instead of event=presence? |
| 18:17.30 | MrSparks | CptBurger, no the laptop is being used for wireshark only, I have zoiper on a mobile and a Siemens Optipoint phone |
| 18:18.04 | WIMPy | Then why should that laptop see the traffic? |
| 18:18.23 | file | we do not accept PUBLISH requests of that type |
| 18:18.47 | MrSparks | WIMPy, the traffic is on the wire ? |
| 18:18.49 | CptBurger | MrSparks: Then the traffic is between 192.168.1.x and the phone IP. The traffic wont be routed to your laptop unless you enable mirroring on a switch port |
| 18:19.14 | WIMPy | MrSparks: What wire? |
| 18:19.31 | WIMPy | Are you using Coax Network? |
| 18:19.31 | MrSparks | CptBurger, so should I see it on the asterisk server ? |
| 18:20.25 | [TK]D-Fender | MrSparks: Isn't that where you TOLD it to communicate with? |
| 18:21.38 | CptBurger | MrSparks: sip set debug on will show you want asterisk sees |
| 18:24.40 | CptBurger | @file: that event comes from the phone, correct? Where can i find a list of events that asterisk currently accepts? |
| 18:24.41 | MrSparks | [TK]D-Fender, CptBurger WIMPy ok I say sip on the asterisk server, why can't I see it on the laptop like DNS? |
| 18:24.58 | [TK]D-Fender | SIP isn't BROADCAST |
| 18:25.01 | file | the only PUBLISH types that are accepted are some Asterisk ones used for exchanging information between servers |
| 18:25.06 | [TK]D-Fender | Traffic goes from A to B |
| 18:25.13 | [TK]D-Fender | That is what switches do |
| 18:25.32 | CptBurger | @file: So my panasonic phones that use resource lists still dont work right now? |
| 18:25.54 | WIMPy | MrSparks: That only wors if you don't have a switch in your network or if its a managed one, configured to give you all traffic. |
| 18:25.56 | MrSparks | [TK]D-Fender, would I see it with a hub instead of a switch |
| 18:26.01 | file | Asterisk doesn't accept presence publications, it will provide them using internally determined device state |
| 18:26.49 | CptBurger | You did shout implement nothing earlier... :) |
| 18:27.05 | MrSparks | anyway thanks [TK]D-Fender , WIMPy , CptBurger |
| 18:27.23 | [TK]D-Fender | MrSparks: Or a switch that does port replication, etc |
| 18:27.30 | [TK]D-Fender | MrSparks: Etierh way you should be looking on the SERVER |
| 18:27.46 | [TK]D-Fender | MrSparks: Not expecting some 3rd party machine to ever have the traffic ever cross its path |
| 18:28.20 | *** join/#asterisk andresmujica (~andresmmu@ubuntu/member/andresmujica) |
| 18:30.04 | CptBurger | Mrspakrs: A hub may do the trick but a switch wont unless you enable port mirroring |
| 18:32.11 | *** part/#asterisk MrSparks (~twanny@46.11.36.4) |
| 18:37.11 | CptBurger | So to recap, Resource Lists are really only for asterisk to asterisk server communication. Not phones that use resource lists. I was hoping that the new resource list would work the way that this patch did for 1.8 https://issues.asterisk.org/jira/browse/ASTERISK-19516 |
| 18:37.44 | CptBurger | It gave me BLF on my Panasonic KX-UT248 phones. |
| 18:38.55 | file | no |
| 18:38.59 | file | that's not what I said |
| 18:39.30 | file | Asterisk supports RLS for subscriptions, you can subscribe and get an aggregate state of things - that state is calculated by Asterisk, it's what you get now if you subscribe individually |
| 18:39.49 | file | PUBLISH is for pushing state into Asterisk, which isn't supported |
| 18:45.39 | CptBurger | ok, thank you for the clarification. I see that my devices are registering theeir state properly. |
| 18:46.14 | CptBurger | but its not sending a new list to the phone that has subscribed to it |
| 18:46.51 | *** join/#asterisk andresmujica (~andresmmu@ubuntu/member/andresmujica) |
| 18:49.18 | *** join/#asterisk camerin (hoax@elite.bshellz.net) |
| 18:52.10 | *** join/#asterisk anthm (~anthm@freeswitch/developer/anthm) |
| 19:04.21 | CptBurger | I'm also experiencing a fairly consistent segfault when lists are sent out. Seems to happen when I boot up a second phone and the second list goes out. I'm recompiling with DONT_OPTIMIZE and BETTER_BACKTRACES to get you guys soem good info. |
| 19:07.36 | *** join/#asterisk Tim_Toady (~fuzzy@snf-33276.vm.okeanos.grnet.gr) |
| 19:13.21 | *** join/#asterisk Iamnacho (~Iamnacho@ip72-213-61-117.om.om.cox.net) |
| 19:28.49 | *** join/#asterisk CptBurger (~aweinburg@198.0.100.225) |
| 19:37.10 | *** join/#asterisk areski (~areski@80.174.128.43.dyn.user.ono.com) |
| 19:52.46 | *** join/#asterisk sparetire_ (~sparetire@unaffiliated/sparetire) |
| 20:01.15 | *** join/#asterisk exuberocity (~exuberoci@oh-76-2-238-143.dhcp.embarqhsd.net) |
| 20:03.53 | *** join/#asterisk generalhan (~tester@about/windows/staff/generalhan) |
| 20:27.40 | *** join/#asterisk camerin (hoax@elite.bshellz.net) |
| 20:30.05 | *** join/#asterisk Panther_Modern (~Panther_M@unaffiliated/panther-modern/x-6168176) |
| 20:30.34 | *** join/#asterisk robmal (r@wporzo.pl) |
| 20:34.04 | *** join/#asterisk dmartin9999 (~dmartin@mail.iotechno.com) |
| 20:37.09 | *** join/#asterisk camerin (hoax@elite.bshellz.net) |
| 20:40.13 | *** join/#asterisk [TK]D-Fender (~joe@64.235.216.2) |
| 20:44.33 | *** join/#asterisk CptBurger (~aweinburg@198.0.100.225) |
| 20:46.25 | CptBurger | Where would I find the core dump on Ubuntu for an asterisk server started by init startup script? I'm not sure what the working directory is and find is not helping.. |
| 20:56.45 | rmudgett | Core dumps are not created unless the -g option is used to start asterisk. |
| 20:58.12 | CptBurger | yeah i know, im having asegfault issues and mjordan pointed me to the wiki on getting a backtrace |
| 20:59.25 | CptBurger | so i cd /home/andrew (as a unpriviledged location) and run asterisk -vvvg and wait for it to crash |
| 20:59.44 | CptBurger | it does and says core dumped but there is no core file in /home/andrew |
| 21:00.31 | CptBurger | i tried from another directory and it says Unable to access the running directory (Permission denied). Changing to '/' for compatibility. But there is no core file in / after crash either |
| 21:01.23 | CptBurger | i changed the startup script to include -g as well |
| 21:01.41 | CptBurger | but i cant seem to get a core file with or without the script |
| 21:03.30 | CptBurger | i know what it is |
| 21:03.34 | CptBurger | asterisk user |
| 21:03.50 | CptBurger | curse my secure build! |
| 21:12.52 | *** part/#asterisk marceloamorim (~marcelo@189-90-192-72.isimples.com.br) |
| 21:22.24 | *** join/#asterisk bkruse (~Adium@24.42.207.11) |
| 21:45.29 | *** join/#asterisk azerus (~badass@unaffiliated/badass) |
| 21:50.07 | *** join/#asterisk BBone_ (~Thunderbi@s75-157-233-55.bc.hsia.telus.net) |
| 22:04.45 | *** part/#asterisk mjordan (mjordan@nat/digium/x-cqvkabxvhbrjuqno) |
| 22:08.16 | *** join/#asterisk kasanop (~kasanop@ivanpoddubny.com) |
| 22:24.33 | *** join/#asterisk sareebro (~sareebro@unaffiliated/sareebro) |
| 22:26.39 | *** join/#asterisk bmurt (~brendan@pool-173-71-157-121.nrflva.fios.verizon.net) |
| 22:33.28 | sareebro | 3RD_FRM_CHECK_ERROR is the bane of my existence. If anyone can help me troubleshoot this ongoing issue I've been having with sending faxes using the SendFax application over both SIP and analog, please PM me! Thanks :D |
| 22:40.25 | *** join/#asterisk nixz (~nixz@unaffiliated/nixz) |
| 22:41.42 | nixz | hello guys! would asterisk work if instead of using 10000-20000 rtp... I'll use 2 to 3 ports not within those range specified? |
| 22:44.34 | nixz | I just read this.. for each RTP port, you also open RTCP port. Therefore a call can consume up to 4 RTP ports. |
| 22:44.35 | nixz | the first port of the range should be even, so 10001 won't be used (use 10000 or 10002 instead); the last port must be uneven, and if you specify e.g. 10017 as last in range asterisk will actually use 10018 |
| 23:23.58 | *** join/#asterisk jameswf (uid27319@gateway/web/irccloud.com/x-zqbwfuorazqsnmey) |
| 23:29.03 | *** join/#asterisk petris (sid19918@gateway/web/irccloud.com/x-ofnzadhvynzukejl) |
| 23:59.35 | *** join/#asterisk fstd (~fstd@unaffiliated/fisted) |