| 00:00.22 | CIA-14 | BRL-CAD: 03brlcad * 10brlcad/configure.ac: check for setpriority for src/libbu/parallel.c in bu_nice_set() |
| 00:38.51 | IriX64 | http://irix64.spaces.live.com/photos/brl-cad <--- moonlight shot rendered on xwin32 :) |
| 00:40.08 | IriX64 | heh you do it i'm busy with 7.10 ;) |
| 00:40.23 | brlcad | i just might :P |
| 00:40.39 | IriX64 | give me a copy when you get it done :) |
| 00:44.23 | IriX64 | haha xwin32 takes screen shots too, bonus, i might buy that thing |
| 00:49.51 | ``Erik | or a big sphere |
| 00:51.34 | IriX64 | yellow ;) |
| 00:53.00 | IriX64 | ``Erik look for ],, in configure.ac (the x11 link functionality part i think) |
| 00:53.31 | ``Erik | um, why? |
| 00:54.03 | IriX64 | my x11 support isnt there and don't tell me i don't have x11 :) |
| 00:55.47 | ``Erik | um, that's testing for link ability, after the header has been found |
| 00:56.02 | ``Erik | check your config.log for why it's unable to check the X libs |
| 00:56.19 | IriX64 | ok ty |
| 00:57.11 | IriX64 | thought acchecklib checked the libs |
| 00:58.29 | IriX64 | the jove thing has already been reported i take it? |
| 01:02.34 | brlcad | yes |
| 01:02.53 | brlcad | IriX64: this would be a great time to learn CVS and work from the latest CVS sources |
| 01:03.04 | brlcad | so that changes can be immediately applied and retested |
| 01:03.29 | brlcad | didn't matter before relase, but now it would help |
| 01:04.36 | IriX64 | ill think about it had a horrible experience with cvs don't want it repeated (guy hacked his way in using my ip and deleted most of the project, I swore off cvs after that) |
| 01:06.35 | brlcad | ehm, that would only be if you were running a cvs server |
| 01:06.57 | brlcad | otherwise, you're going to be looking at problems that have already been fixed again |
| 01:10.23 | ``Erik | um, using your ip? O.o like a MiM attack, or? o.O (and since you'll only have read access to the repo, like everyone else in the world does, there's no risk, right?) |
| 01:10.33 | IriX64 | ok ill take the sourcefoge tutorial and set up a client |
| 01:13.24 | CIA-14 | BRL-CAD: 03brlcad * 10brlcad/misc/nsis/Makefile.am: initial makefile template for nsis files, add files to the dist |
| 01:14.10 | CIA-14 | BRL-CAD: 03brlcad * 10brlcad/ (configure.ac misc/Makefile.am): generate nsis Makefile, traverse into it |
| 01:14.19 | brlcad | the new nsis installer is pretty sweet |
| 01:14.30 | brlcad | gonna have to one-up it on os x |
| 01:17.45 | ``Erik | nsis as in nullsoft? |
| 01:22.54 | joevalleyfield | only way to one up it is to make bloody aqua work ;) |
| 01:23.00 | IriX64 | well rsync seems to be working, will that do? |
| 01:24.41 | joevalleyfield | irix, rsync for what? |
| 01:24.56 | IriX64 | getting the latest brlcad sources |
| 01:25.10 | IriX64 | sourceforge supports it |
| 01:25.27 | joevalleyfield | let me go read about that |
| 01:25.41 | IriX64 | all right |
| 01:25.44 | IriX64 | :) |
| 01:26.03 | joevalleyfield | actually, could you give me a link? |
| 01:27.02 | joevalleyfield | wow |
| 01:27.06 | joevalleyfield | that's magical |
| 01:27.48 | joevalleyfield | for a non-committer who is on irc here, that is probably ideal |
| 01:28.35 | IriX64 | http://sourceforge.net/docs/E04/en/#viewcvs |
| 01:28.48 | IriX64 | yeah |
| 01:31.23 | IriX64 | http://www.pastebin.ca/440464 <---- bottom of the paste what the farkle is yes/lib :) |
| 01:31.51 | IriX64 | just noticed it don't know where it first happened |
| 01:33.55 | IriX64 | rsync needs a progress indicator :) |
| 01:34.42 | joevalleyfield | --progress ? |
| 01:34.55 | IriX64 | too late :) |
| 01:39.09 | ``Erik | why do you need a progess indictor? go do, y'know, something else... *shrug* |
| 01:40.00 | IriX64 | heh im playing with the source tarball does that qualify as something :) |
| 01:40.40 | IriX64 | that yes lib is probably my fault mea culpa |
| 01:45.03 | IriX64 | what platform has 7.10.0 successfully been built on? |
| 01:46.15 | brlcad | wow, didn't know there was rsync access added myself |
| 01:46.36 | joevalleyfield | brlcad, you could use that to back the thing up |
| 01:48.00 | brlcad | i do for the cvsroot |
| 01:48.07 | brlcad | just didn't know there was user-level |
| 01:48.43 | brlcad | or is it the root he's syncing out.. heh |
| 01:49.23 | IriX64 | sourceforge says you can *extract that way |
| 01:52.02 | joevalleyfield | it is whole lot easier to strip X out this time than it was a year and a half ago |
| 01:55.38 | IriX64 | somebody already did it for you, it doesn't build :P |
| 01:58.23 | IriX64 | found X, it was hiding behind W ;) |
| 02:11.11 | joevalleyfield | irix, what platform are you on? |
| 02:11.40 | IriX64 | no secret cygwin on windows xp+ |
| 02:11.50 | joevalleyfield | ok |
| 02:11.57 | IriX64 | err pro not + |
| 02:13.24 | IriX64 | amd model 3800+ cpu |
| 02:14.33 | IriX64 | does everything i want it to shrug |
| 02:16.55 | joevalleyfield | i've never built on cygwin |
| 02:17.29 | IriX64 | http://irix64.spaces.live.com/photos/brlcad pix no 72 some of the things its currently doing |
| 02:18.24 | IriX64 | i've probably never built on what your running:) |
| 02:18.39 | joevalleyfield | :) |
| 02:18.44 | joevalleyfield | mac |
| 02:18.53 | IriX64 | as i said :) |
| 02:20.29 | IriX64 | runs irssi too but i prefer to just click on a url in the channel window and auto go there |
| 02:28.29 | *** join/#brlcad bjorkBSD (n=bjork@ip70-178-214-102.ks.ks.cox.net) |
| 02:34.41 | IriX64 | rsync pulling source now neat |
| 02:34.54 | IriX64 | might stay up tonight :) |
| 02:48.55 | CIA-14 | BRL-CAD: 03brlcad * 10brlcad/README: condense the commercial support information, but credit SURVICE Engineering accordingly instead of the focus on SURVIAC |
| 02:51.35 | IriX64 | the blog has a cygwin build of 7.8.4 running on the windows desktop, xwin32 is pretty good... seamless xwindows |
| 03:02.06 | CIA-14 | BRL-CAD: 03brlcad * 10brlcad/doc/html/manuals/Obtain.html: stray reference to the old address though it doesn't meantion the old agreement. replace with the same info from README |
| 03:21.40 | CIA-14 | BRL-CAD: 03brlcad * 10brlcad/src/liboptical/ (photonmap.c sh_plastic.c): removed the spaced out pointer dereference format inconsistencies |
| 03:25.23 | CIA-14 | BRL-CAD: 03brlcad * 10brlcad/src/liboptical/ (photonmap.c sh_plastic.c): ws |
| 03:39.55 | deltazap | IriX64: irssi is the only irc client, really |
| 03:40.09 | deltazap | it's the only one worth talking about ;) |
| 03:40.16 | IriX64 | how bout bitchX ;) |
| 03:41.16 | CIA-14 | BRL-CAD: 03brlcad * 10brlcad/src/liboptical/photonmap.c: use libbu memory management.. there's a bug in here somewhere where a right tree node becomes non-null invalid. also seems to be a massive amount of leakage going on .. stuff not getting free'd.. |
| 03:42.18 | IriX64 | deltazap: practice what you preach :P |
| 03:44.30 | deltazap | 4i4r7s7s5i 8i8s 9t3h3e 10b11e11s12t 2c2l6i6e4n4t 7h5a5n8d8s 9d3o3w10n 11:11P |
| 03:45.00 | IriX64 | thats kick material :) |
| 03:45.20 | bjorkBSD | whoa i just saw colors! |
| 03:45.21 | deltazap | haha, but it's one line :P |
| 03:46.21 | deltazap | if i had been spamming figlet or cowsay, then it would be controversial |
| 03:46.53 | CIA-14 | BRL-CAD: 03brlcad * 10brlcad/src/liboptical/photonmap.c: missed a realloc, use calloc where we need it be zero |
| 03:48.14 | CIA-14 | BRL-CAD: 03brlcad * 10brlcad/BUGS: crashes during photonmap raytrace of m35 where right node is invalid |
| 03:48.54 | brlcad | ~colortest |
| 03:48.55 | ibot | 2c3o4l5o6r7t8e9s10t |
| 03:49.28 | deltazap | haha |
| 03:50.13 | deltazap | brlcad: when ever you need testing on your installer for osx, i'm there ;) |
| 03:50.21 | brlcad | :) |
| 03:50.41 | deltazap | and for ruby. i love me some ruby |
| 03:50.52 | brlcad | I want to get it to just a drag and drop that has just the "unified environment" new interface |
| 03:51.10 | brlcad | else a folder that has mged, archer, and a shell in the meantime |
| 03:51.34 | brlcad | instead of the installer that it uses now |
| 03:51.39 | deltazap | yeah, i don't thin kthat will work if you normally need admin access in order to install into /usr |
| 03:52.07 | brlcad | yeah, it wouldn't install into /usr as a drag n' drop |
| 03:53.39 | brlcad | IriX64: for what it's worth, you're pulling the entire history of BRL-CAD |
| 03:53.47 | brlcad | not just a checkout that will compile |
| 03:53.57 | brlcad | you'll still have to pull a "checkout" from what you're downloading |
| 03:54.40 | IriX64 | can't work from that dir? |
| 03:54.56 | brlcad | cvs -d :pserver:anonymous@brlcad.cvs.sourceforge.net:/cvsroot/brlcad login |
| 03:55.00 | brlcad | cvs -d :pserver:anonymous@brlcad.cvs.sourceforge.net:/cvsroot/brlcad checkout -P brlcad |
| 03:55.05 | IriX64 | next rsync run i should be able to pull just new/changed files |
| 03:55.10 | brlcad | those two will get you a current checkout |
| 03:55.31 | brlcad | rsync is pulling the *entire* source history -- the cvs root, not a cvs checkout |
| 03:55.48 | IriX64 | you keep all that there? |
| 03:56.06 | IriX64 | ill wait and see what ive got |
| 03:56.17 | brlcad | you could still use what you get |
| 03:56.40 | brlcad | you're just getting about 20 times more data than you need or will want |
| 03:56.48 | IriX64 | ty |
| 03:56.58 | brlcad | i.e. you're downloading every version of BRL-CAD that has ever existed |
| 03:57.31 | brlcad | all versions in each file, not neatly sorted out -- in CVS/RCS format, not in a compilable format |
| 03:57.44 | IriX64 | well im a history buff :) |
| 03:58.10 | deltazap | IriX64: ok, ready? |
| 03:58.21 | IriX64 | for? |
| 03:58.58 | deltazap | On feb 20, 2003, what version of brlcad was available and what state was it in. Please respond in a 5 paragraph format. |
| 03:59.02 | deltazap | :O |
| 03:59.03 | deltazap | :P |
| 03:59.05 | brlcad | just note that it won't be anything that you'll be able to compile directly, you'll still have to do a checkout -- not hard either, just cvs -d path_to_what_you_rsync checkout -P brlcad |
| 03:59.22 | IriX64 | ty |
| 03:59.30 | IriX64 | trying cvs |
| 03:59.38 | brlcad | still probably easier to use the two cvs commands above :) |
| 04:01.22 | IriX64 | cvs password? |
| 04:01.29 | brlcad | o password |
| 04:01.31 | brlcad | *no |
| 04:01.50 | brlcad | just hit enter |
| 04:04.09 | IriX64 | got it but ill never remebr those commands :) |
| 04:04.27 | IriX64 | ill stop rsync |
| 04:05.46 | IriX64 | my fav just went by...havoc.asc |
| 04:05.50 | IriX64 | :) |
| 04:06.19 | brlcad | ibot: cadcvs is <reply>To obtain BRL-CAD from anonymous CVS: cvs -d :pserver:anonymous@brlcad.cvs.sourceforge.net:/cvsroot/brlcad login && cvs -d :pserver:anonymous@brlcad.cvs.sourceforge.net:/cvsroot/brlcad checkout -P brlcad |
| 04:06.21 | ibot | okay, brlcad |
| 04:06.26 | brlcad | ~cadcvs |
| 04:06.28 | ibot | To obtain BRL-CAD from anonymous CVS: cvs -d :pserver:anonymous@brlcad.cvs.sourceforge.net:/cvsroot/brlcad login && cvs -d :pserver:anonymous@brlcad.cvs.sourceforge.net:/cvsroot/brlcad checkout -P brlcad |
| 04:07.29 | IriX64 | ty filed |
| 04:14.51 | *** join/#brlcad PrezKennedy (n=Matthew@c-69-255-112-97.hsd1.md.comcast.net) |
| 04:23.07 | IriX64 | http://www.pastebin.ca/440612 < -- 7.10.0 sourcetarball at work :) |
| 04:24.47 | IriX64 | too many hoops to go thru to build it again :) |
| 04:26.31 | IriX64 | so next checkout with the same switches will get me just the changed files? |
| 04:28.23 | IriX64 | how do you want me to proceed? start from autogen.sh or just configure it? |
| 04:48.40 | IriX64 | heh that was easy, no configure :) so ill autogen |
| 04:49.02 | IriX64 | now ill shut up lessn i have something to say. |
| 05:41.55 | brlcad | you don't need to checkout again, you can actually stay directly in sync with the latest |
| 05:42.07 | brlcad | just run "cvs update" in the brlcad directory that you checked out |
| 05:43.48 | brlcad | it'll update to the latest source every time you update, barring any conflicts that occur from an edit you might make |
| 08:16.12 | *** join/#brlcad clock_ (i=clock@84-72-61-6.dclient.hispeed.ch) |
| 10:19.35 | *** join/#brlcad docelic (n=docelic@212.15.173.88) |
| 10:49.42 | *** join/#brlcad docelic (n=docelic@212.91.114.180) |
| 12:25.59 | *** join/#brlcad clock_ (i=clock@84-72-61-6.dclient.hispeed.ch) |
| 13:16.24 | *** join/#brlcad smallfoot- (i=vc@clamwin/translator/smallfoot) |
| 13:16.29 | smallfoot- | back |
| 13:17.26 | brlcad | toes |
| 13:18.43 | smallfoot- | whats up? |
| 13:19.37 | smallfoot- | from Wikipedia "The user interface is rather anachronistic, more typical of the 80's than the beginning of 21st century. It is hardly usable for an occasional user." |
| 13:22.08 | smallfoot- | i wish there was some CAD that was rediculously simple |
| 13:22.13 | smallfoot- | and rediculously easy to use |
| 13:22.20 | smallfoot- | so i could use it without RTFM |
| 13:22.49 | docelic | smallfoot-: well, we can save you the time by bringing you back to reallity really fast. |
| 13:22.54 | docelic | There is no such CAD ;-) |
| 13:24.43 | smallfoot- | hehe |
| 13:29.16 | clock_ | smallfoot-: you can learn using BRL-CAD faster than what would take you to earn money for buying a commercial CAD licence |
| 13:35.34 | smallfoot- | license??? |
| 13:47.31 | docelic | Hey folks how come the binary releases are behind the source code on sf.net page? You need help with building on various platforms ? |
| 13:48.10 | brlcad | docelic: an understatement |
| 13:48.16 | brlcad | but yes |
| 13:49.32 | smallfoot- | oh |
| 13:49.44 | smallfoot- | doesnt sourceforge have some compile farm? |
| 13:50.22 | docelic | yes, but not automated afaik |
| 13:50.37 | brlcad | actually, they shut the compile farm down |
| 13:51.06 | brlcad | getting the compilations themselves isn't generally too bad for any given platform |
| 13:53.05 | brlcad | moreso the number of platforms and packaging up the builds for some of those systems is often a manual process |
| 13:53.19 | brlcad | there are some scripts to automate the builds packagings, but they're incomplete |
| 13:53.25 | brlcad | sh/make_*.sh |
| 13:53.39 | brlcad | tied to the main Makefile so that there are build targets |
| 13:54.19 | brlcad | as well as polish like consistently building to /usr/brlcad/rel-#.#.# with symlinks in /usr/brlcad haven't been scripted yet either |
| 13:55.43 | smallfoot- | http://archimedes.incubadora.fapesp.br/portal/screenshots-2/fileMenu.gif/image_view_fullscreen oh this looks nice |
| 14:20.58 | *** join/#brlcad clock_ (i=clock@84-72-61-6.dclient.hispeed.ch) |
| 15:09.40 | *** join/#brlcad docelic (n=docelic@213.147.110.16) |
| 15:24.01 | brlcad | woot, have almost made vers.sh entirely obsolete |
| 16:28.27 | *** join/#brlcad thomasgruebler (n=557ca7f9@bz.bzflag.bz) |
| 16:28.51 | thomasgruebler | hallo! |
| 16:30.11 | thomasgruebler | ich hab brlcad auf debian installiert. jedoch weis ich nicht wie ich es ausführen soll. es gibt da einen ordner wo sehr viele ausführbare dateien von brlcad drinnen sind,aber alle durchzuprobieren würde ewig dauern und keine der ausprobierten startete eine gui |
| 16:31.17 | bjorkBSD | auf englisch bitte: http://google.com/translate_t |
| 16:31.40 | thomasgruebler | hello |
| 16:31.46 | bjorkBSD | <PROTECTED> |
| 16:31.47 | thomasgruebler | i hav installed brlcad on debian. |
| 16:31.55 | thomasgruebler | but i don't know how to start it |
| 16:31.59 | bjorkBSD | mged |
| 16:33.01 | bjorkBSD | that's far shorter in english than it is in german. |
| 16:33.01 | bjorkBSD | very curious. |
| 16:35.47 | thomasgruebler | i go to reinstall it. |
| 16:36.00 | thomasgruebler | the newer version |
| 16:39.45 | thomasgruebler | so |
| 16:39.51 | thomasgruebler | now i have the newest version |
| 16:39.56 | thomasgruebler | but i cannot start it |
| 16:40.05 | thomasgruebler | mged is not possible |
| 16:40.42 | bjorkBSD | why not? |
| 16:40.47 | bjorkBSD | it's how i've always started it... |
| 16:41.00 | thomasgruebler | command not found |
| 16:41.05 | bjorkBSD | are you using tcsh? |
| 16:41.17 | thomasgruebler | bash |
| 16:41.25 | bjorkBSD | then it should be in your path. |
| 16:41.53 | bjorkBSD | or maybe not ... |
| 16:41.55 | thomasgruebler | where is the location of it? |
| 16:41.58 | deltazap | only if he's added it to his path, or if the debian package adds it |
| 16:41.59 | bjorkBSD | mine's in /urs/brlcad |
| 16:42.02 | deltazap | /usr/brlcad/bin |
| 16:42.13 | bjorkBSD | */usr |
| 16:42.52 | thomasgruebler | now it's working |
| 16:42.53 | thomasgruebler | thanks |
| 16:43.22 | thomasgruebler | it seems more complicate than autocad |
| 16:44.38 | thomasgruebler | qhen i want to create an elypsoidor soit writes: no database opened. |
| 16:44.43 | bjorkBSD | it's not a cad program. |
| 16:44.48 | bjorkBSD | as in, 2d-cad |
| 16:44.52 | bjorkBSD | it's a 3d cad program. |
| 16:44.58 | bjorkBSD | cad/cae |
| 16:45.05 | thomasgruebler | thomasgruebler@SiduxG:~/install$ /usr/brlcad/bin/mgedInitializing and backgrounding, please wait...libGL warning: 3D driver claims to not support visual 0x4b |
| 16:45.17 | thomasgruebler | is written when i start it from bash |
| 16:45.32 | thomasgruebler | i wanted an 3d cad programm |
| 16:45.39 | bjorkBSD | you found it :) |
| 16:45.50 | bjorkBSD | using it is a different matter. |
| 16:46.00 | thomasgruebler | the first in Linux non cost. |
| 16:46.05 | bjorkBSD | there're others. |
| 16:46.15 | thomasgruebler | which? |
| 16:46.22 | bjorkBSD | uhhh i forget. |
| 16:46.27 | thomasgruebler | :) |
| 16:46.28 | bjorkBSD | i think it starts with a b. |
| 16:46.43 | bjorkBSD | blender. |
| 16:46.45 | bjorkBSD | that's right. |
| 16:47.06 | thomasgruebler | i know this. |
| 16:47.19 | thomasgruebler | but it cannot draw lines of spezial lenght |
| 16:47.30 | bjorkBSD | i bet it's a user error. |
| 16:47.47 | thomasgruebler | no it's real. |
| 16:47.51 | docelic | ;-) |
| 16:47.55 | bjorkBSD | <PROTECTED> |
| 16:48.03 | thomasgruebler | there are tweaks to do it but it's mainly an animation programm |
| 16:48.19 | thomasgruebler | how can i load an database in mged? |
| 16:49.15 | bjorkBSD | one day i promise i'll write a decent intro tutorial |
| 16:49.21 | bjorkBSD | /usr/brlcad/share/brlcad/7.8.2/html/manuals |
| 16:50.38 | thomasgruebler | ok a database is a file |
| 16:51.06 | bjorkBSD | think of brlcad as you'd think of say, emacs. |
| 16:51.13 | bjorkBSD | lots of really interesting ideas expressed :) |
| 16:51.26 | thomasgruebler | now i wanted to make an prisma but i killed it |
| 16:51.56 | thomasgruebler | i need something like autocad, proengineer. free for Linux |
| 16:52.17 | deltazap | this is the closest thing to pro/e for free |
| 16:54.14 | bjorkBSD | thomasgruebler, you can make your own pro/e :) |
| 16:54.20 | bjorkBSD | with brlcad! |
| 16:54.33 | thomasgruebler | how? |
| 16:55.39 | bjorkBSD | well the sources are open. |
| 16:55.50 | bjorkBSD | it's just a matter of beating into a pro/e shape. |
| 16:55.55 | bjorkBSD | *it |
| 16:56.02 | bjorkBSD | got a hammer? :D |
| 16:56.37 | thomasgruebler | :) |
| 16:57.07 | thomasgruebler | i know how to programm a microcontroller in C but not how to programm brlcad. and without any kde or gtk lib |
| 16:57.49 | docelic | For a man who know how to programm a microcontroller in C. brlcad cannot be a problem! |
| 16:58.17 | bjorkBSD | heheheh |
| 16:58.29 | bjorkBSD | think of brlcad as a microcontroller ;) |
| 16:58.32 | thomasgruebler | i've never programme somthing for pc. but i want to do |
| 16:58.54 | thomasgruebler | for displaying data sent from the mikrocontroller |
| 16:58.56 | bjorkBSD | gut. macht du! |
| 17:00.17 | thomasgruebler | jetzt bemüh ich mich die ganze zeit umsonst englisch zu sprechen :) |
| 17:02.36 | bjorkBSD | <PROTECTED> |
| 17:03.39 | bjorkBSD | aber ich spreche nicht Deutsches. |
| 17:04.28 | thomasgruebler | so it's not your mother language |
| 17:04.37 | bjorkBSD | ich hatte ein schone deutsche madchen vor jahren. |
| 17:04.39 | bjorkBSD | nein. |
| 17:05.24 | bjorkBSD | no habla. |
| 17:05.40 | thomasgruebler | :) |
| 17:06.22 | bjorkBSD | sie war wunderbar |
| 17:06.56 | bjorkBSD | und ich var ein schwein 8-| |
| 17:07.00 | thomasgruebler | wie alt bist du? |
| 17:07.04 | thomasgruebler | warst du da? |
| 17:07.42 | bjorkBSD | 29 ... and a half :) |
| 17:08.10 | bjorkBSD | Texas. |
| 17:08.35 | thomasgruebler | how can i stop brlcad to turn my prisma? it turnsaround when i pressed ctrl+Z |
| 17:09.29 | thomasgruebler | help |
| 17:10.08 | bjorkBSD | hilfe :) |
| 17:10.28 | bjorkBSD | when in doubt, turn it off and turn it back on ;-) |
| 17:10.29 | thomasgruebler | bitte hild mir |
| 17:11.10 | thomasgruebler | how??? |
| 17:14.44 | bjorkBSD | hmm. i oughta get version 7.10 |
| 17:14.53 | bjorkBSD | do you have 7.8.2 or the newest one? |
| 17:15.15 | thomasgruebler | the newest deb from sf |
| 17:15.21 | bjorkBSD | ah |
| 17:15.24 | thomasgruebler | i killed the application |
| 17:15.41 | bjorkBSD | there's no getting around reading the manual on this one, thomasgruebler. |
| 17:16.15 | thomasgruebler | i see |
| 17:16.42 | thomasgruebler | but from first view it looks good so i like it |
| 17:17.29 | deltazap | take your time, read through intro to mged |
| 17:17.44 | deltazap | huh |
| 17:18.04 | bjorkBSD | EOF, deltazap. |
| 17:18.22 | *** join/#brlcad thomasgruebler (n=557ca7f9@bz.bzflag.bz) |
| 17:18.28 | deltazap | i thought you could never run out of internet :P |
| 17:19.09 | bjorkBSD | hehe |
| 17:19.50 | thomasgruebler | i killed firefox somehow |
| 17:19.59 | thomasgruebler | i don't know how |
| 17:20.04 | thomasgruebler | it neverhappened |
| 17:20.08 | thomasgruebler | bye. |
| 17:20.19 | bjorkBSD | EOF thomasgruebler. |
| 17:20.33 | deltazap | apt-get install irssi |
| 17:20.37 | deltazap | oh darn he left |
| 17:20.39 | bjorkBSD | eek! |
| 17:20.45 | bjorkBSD | pkg_add -r xchat2 |
| 17:21.40 | bjorkBSD | i need to deep clean my german. |
| 17:21.50 | bjorkBSD | para la allemande mamacitas |
| 17:58.24 | *** join/#brlcad Elperion (n=Elperion@p54875aba.dip.t-dialin.net) |
| 18:31.12 | *** join/#brlcad IriX64 (n=mario_du@bas2-sudbury98-1096601189.dsl.bell.ca) |
| 18:34.03 | IriX64 | be vewy vewy quiet, we're hunting tk files :) |
| 18:35.56 | *** join/#brlcad Elperion (n=Elperion@p54875aba.dip.t-dialin.net) |
| 18:36.19 | *** join/#brlcad zapp (n=zap@pool-72-64-253-55.tampfl.fios.verizon.net) |
| 18:36.39 | zapp | whoops, kinda...uh...killed irssi there for a bit |
| 18:57.02 | IriX64 | anybody wanna tacle a build related issue? |
| 18:57.07 | IriX64 | tackle too |
| 19:41.01 | *** join/#brlcad clock__ (i=clock@84-72-61-6.dclient.hispeed.ch) |
| 19:51.02 | bjorkBSD | BRL-CAD Release 7.10.0, Build 20070415 |
| 19:51.02 | bjorkBSD | Elapsed compilation time: 59 minutes, 12 seconds |
| 19:51.20 | docelic | which plataform ? |
| 19:51.36 | bjorkBSD | my computer. |
| 19:51.42 | bjorkBSD | <PROTECTED> |
| 19:52.04 | bjorkBSD | it's a freebsd x86 |
| 19:52.32 | IriX64 | pretty quick if it only took an hour |
| 19:52.41 | bjorkBSD | CPU: Intel(R) Celeron(R) CPU 2.20GHz (2193.53-MHz 686-class CPU) |
| 19:52.44 | bjorkBSD | it's a celeron. |
| 19:54.49 | IriX64 | finally it found tk8.4 |
| 19:54.54 | IriX64 | and tcl |
| 20:02.36 | IriX64 | bjorkBSD did you use the supplied tcl/tk libs? |
| 21:01.44 | bjorkBSD | IriX64, it was 8.5 wasn't it? |
| 21:01.47 | bjorkBSD | i believe i did. |
| 21:01.54 | *** join/#brlcad louipc (n=louipc@bas8-toronto63-1177707276.dsl.bell.ca) |
| 21:07.36 | *** join/#brlcad louipc_ (n=louipc@bas8-toronto63-1088754332.dsl.bell.ca) |
| 21:17.37 | IriX64 | yes thank |
| 21:18.10 | IriX64 | for me 8.5 is fraught with peril :) |
| 21:19.03 | IriX64 | trying with tcl84 :) |
| 21:19.13 | IriX64 | looking very good so far |
| 21:20.05 | IriX64 | still timing out louipc? |
| 21:21.24 | louipc_ | yeah I think I'll have to call my ISP and bitch |
| 21:21.40 | IriX64 | sure its not the server? |
| 21:21.48 | louipc | I'm back in action though with a fresh install and a new hard-disk |
| 21:22.03 | IriX64 | hah back from the wars eh? |
| 21:22.12 | louipc | yeap because the little light on my modem indicates that the network is down on the isp end |
| 21:22.31 | louipc | and I can't access the internet in any way when it happens |
| 21:22.55 | IriX64 | call em tear a strip off after all you're the customer :) |
| 21:24.16 | IriX64 | -ltcl84 gotta love it :) |
| 21:25.16 | IriX64 | static link but what the heck, whatever works :) |
| 21:26.03 | louipc | if brlcad is the only thing you use it for, sure |
| 21:26.44 | IriX64 | huh its a system lib, quite capable of non static linking |
| 21:27.10 | IriX64 | i mean brlcad isd linking its stuff statically |
| 21:30.34 | *** join/#brlcad louipc (n=louipc@bas8-toronto63-1088754332.dsl.bell.ca) |
| 21:33.14 | IriX64 | lets try this map thing, somebody throw out a function i should know nothing about (don't be a smartypants and say main:)) |
| 21:41.55 | IriX64 | http://www.pastebin.ca/441828 <=== map |
| 21:42.47 | bjorkBSD | should i install tcl8.5 independently? |
| 21:50.25 | IriX64 | bjorkBSD if that's aimed at me, I know nothing about fbsd so can't comment |
| 21:56.55 | louipc | I'd say it's a good idea to have it independently |
| 21:59.52 | bjorkBSD | okay. |
| 23:02.07 | brlcad | FAQ Tip of the Day: pressing x, y, z, X, Y, Z in the graphics window will send the model spinning.. you press 0 to stop the spin |
| 23:15.11 | IriX64 | model? or drawing? |
| 23:18.37 | bjorkBSD | thingamagic |
| 23:21.36 | IriX64 | magically bjorkBSD starts spinning :) |
| 23:21.54 | IriX64 | i pressed the appropriate keys :) |
