| 00:11.10 | *** join/#brlcad illethal (n=oden@c-69-137-199-63.hsd1.fl.comcast.net) |
| 00:11.37 | *** part/#brlcad illethal (n=oden@c-69-137-199-63.hsd1.fl.comcast.net) |
| 00:13.08 | CIA-27 | BRL-CAD: 03brlcad * 10brlcad/configure.ac: |
| 00:13.08 | CIA-27 | BRL-CAD: don't just check whether the option is set to the default -- check if it's been |
| 00:13.08 | CIA-27 | BRL-CAD: set at all so that you can use --enable-all with --disable options that may be |
| 00:13.08 | CIA-27 | BRL-CAD: default 'no' already. ran into this situation trying to disable opennurbs |
| 00:13.09 | CIA-27 | BRL-CAD: (which was already default off). |
| 00:16.28 | *** join/#brlcad IriX64 (n=mariodot@bas2-sudbury98-1096601470.dsl.bell.ca) |
| 00:17.24 | IriX64 | louipc, got anymore screenshots? i really liked that last one. |
| 00:20.33 | Supaplex | is it your archnemesis? |
| 00:20.51 | IriX64 | mayhap a dream :) |
| 00:21.17 | IriX64 | a freaking system that works :) |
| 00:22.25 | Supaplex | I hear paper and pencil are pretty reliable |
| 00:22.55 | IriX64 | a system where libraries aren't called *.dll.a :( |
| 00:23.58 | ``Erik | <-- pretty happy with the mac/fbsd combo, thinks brlcad is more or less in the same groove |
| 00:24.25 | IriX64 | mmmm leopard beckons me if i switch |
| 00:26.25 | IriX64 | man you guys are adamant about copying being untouchable aren't you |
| 00:27.02 | ``Erik | ? |
| 00:27.27 | IriX64 | autogen tries to copy COPYING and it gets permission denied |
| 00:27.38 | ``Erik | it tries to copy OVER COPYING |
| 00:27.40 | ``Erik | which'd be BAD |
| 00:27.45 | IriX64 | ah |
| 00:37.41 | IriX64 | i should read that someday, but why i don't plan to give anyone a copy |
| 00:42.29 | yukonbob | *BSD++ |
| 00:54.39 | louipc | IriX64: http://louipc.dontexist.org/screenie.jpg that's how I usually work. confusing huh? I should probably get a 1px border around the windows |
| 00:56.53 | Supaplex | wahou, I'm immortalized in a screenshot :D |
| 00:57.45 | louipc | I usually don't keep them around for -too- long :P |
| 00:58.09 | Supaplex | :) |
| 00:59.02 | louipc | IriX64: yeah man you should try linux or bsd or something, get a cheap computer second hand or something if you don't want to mess with your main machine |
| 00:59.57 | IriX64 | nice shot |
| 01:00.08 | IriX64 | maybe ill switch |
| 01:00.34 | louipc | it took me a long time to completely switch |
| 01:00.50 | IriX64 | and now you're happy? |
| 01:00.50 | louipc | maybe 3 yrs trying out various distros |
| 01:00.58 | louipc | yeah now I'm totally good |
| 01:01.15 | IriX64 | ill give it serious thought |
| 01:09.20 | IriX64 | mmmm when i engage serious mode nothing happens ;) |
| 01:14.46 | ``Erik | thinking hard *grunt* |
| 01:20.46 | *** join/#brlcad dtidrow_work (n=dtidrow@host169.objectsciences.com) [NETSPLIT VICTIM] |
| 01:25.16 | *** join/#brlcad b0ef (n=b0ef@062016141081.customer.alfanett.no) [NETSPLIT VICTIM] |
| 01:25.16 | *** join/#brlcad minute-ssh (n=MinuteEl@silentflame/member/pdpc.base.minuteelectron) [NETSPLIT VICTIM] |
| 01:35.25 | IriX64 | ``Erik, mines more like *blank* :) |
| 01:35.48 | IriX64 | hate firing blanks :) |
| 01:36.16 | louipc | better than drawing one |
| 01:39.31 | *** join/#brlcad b0ef (n=b0ef@062016141081.customer.alfanett.no) [NETSPLIT VICTIM] |
| 01:39.31 | *** join/#brlcad minute-ssh (n=MinuteEl@silentflame/member/pdpc.base.minuteelectron) [NETSPLIT VICTIM] |
| 01:45.59 | IriX64 | tried but my pencil can't handle that :D |
| 01:48.44 | IriX64 | what are you doing looking between my legs :) |
| 01:54.37 | *** join/#brlcad Twingy (n=justin@74.92.144.217) |
| 03:43.25 | *** join/#brlcad bpoole (n=bpoole@UNIX38.andrew.cmu.edu) [NETSPLIT VICTIM] |
| 03:44.03 | *** join/#brlcad PrezKennedy (i=Matt@74.86.45.130) [NETSPLIT VICTIM] |
| 03:44.03 | *** join/#brlcad Supaplex (n=e@166-70-62-194.ip.xmission.com) |
| 03:44.09 | *** join/#brlcad louipc (n=louipc@bas8-toronto63-1096667871.dsl.bell.ca) [NETSPLIT VICTIM] |
| 03:44.11 | *** join/#brlcad brlcad (n=sean@pdpc/supporter/silver/brlcad) [NETSPLIT VICTIM] |
| 03:44.11 | *** join/#brlcad SWPadnos (n=Me@emc/developer/SWPadnos) [NETSPLIT VICTIM] |
| 03:44.11 | *** join/#brlcad yukonbob (n=yukonbob@198.235.198.234) [NETSPLIT VICTIM] |
| 03:44.11 | *** mode/#brlcad [+o brlcad] by irc.freenode.net |
| 03:45.02 | *** join/#brlcad Twingy (n=justin@74.92.144.217) [NETSPLIT VICTIM] |
| 03:45.02 | *** join/#brlcad CIA-27 (i=cia@208.69.182.149) [NETSPLIT VICTIM] |
| 03:45.02 | *** join/#brlcad ``Erik (i=erik@c-68-54-174-162.hsd1.md.comcast.net) [NETSPLIT VICTIM] |
| 03:45.02 | *** join/#brlcad Maloeran (n=maloeran@glvortex.net) [NETSPLIT VICTIM] |
| 03:45.07 | *** join/#brlcad ChanServ (ChanServ@services.) |
| 03:45.07 | *** mode/#brlcad [+o ChanServ] by irc.freenode.net |
| 03:45.57 | *** join/#brlcad minute-ssh (n=MinuteEl@silentflame/member/pdpc.base.minuteelectron) [NETSPLIT VICTIM] |
| 03:45.57 | *** join/#brlcad b0ef (n=b0ef@062016141081.customer.alfanett.no) [NETSPLIT VICTIM] |
| 03:45.57 | *** join/#brlcad dtidrow_work (n=dtidrow@host169.objectsciences.com) [NETSPLIT VICTIM] |
| 03:46.02 | *** join/#brlcad IriX64 (n=mariodot@bas2-sudbury98-1096601470.dsl.bell.ca) [NETSPLIT VICTIM] |
| 03:46.02 | *** join/#brlcad starseeker (n=CY@ip72-218-18-244.hr.hr.cox.net) [NETSPLIT VICTIM] |
| 04:11.01 | *** join/#brlcad bpoole (n=bpoole@UNIX38.andrew.cmu.edu) [NETSPLIT VICTIM] |
| 04:11.01 | *** join/#brlcad brlcad (n=sean@pdpc/supporter/silver/brlcad) |
| 04:11.01 | *** join/#brlcad SWPadnos (n=Me@emc/developer/SWPadnos) |
| 04:11.02 | *** join/#brlcad yukonbob (n=yukonbob@198.235.198.234) |
| 04:11.02 | *** mode/#brlcad [+o brlcad] by irc.freenode.net |
| 04:11.03 | *** join/#brlcad minute-ssh (n=MinuteEl@silentflame/member/pdpc.base.minuteelectron) [NETSPLIT VICTIM] |
| 04:11.03 | *** join/#brlcad b0ef (n=b0ef@062016141081.customer.alfanett.no) [NETSPLIT VICTIM] |
| 04:11.03 | *** join/#brlcad dtidrow_work (n=dtidrow@host169.objectsciences.com) [NETSPLIT VICTIM] |
| 04:11.54 | *** join/#brlcad Twingy (n=justin@74.92.144.217) |
| 04:11.54 | *** join/#brlcad CIA-27 (i=cia@208.69.182.149) |
| 04:11.54 | *** join/#brlcad ``Erik (i=erik@c-68-54-174-162.hsd1.md.comcast.net) |
| 04:11.54 | *** join/#brlcad Maloeran (n=maloeran@glvortex.net) |
| 04:12.02 | *** join/#brlcad ChanServ (ChanServ@services.) |
| 04:12.02 | *** mode/#brlcad [+o ChanServ] by irc.freenode.net |
| 04:12.47 | *** join/#brlcad PrezKennedy (i=Matt@74.86.45.130) [NETSPLIT VICTIM] |
| 04:12.47 | *** join/#brlcad Supaplex (n=e@166-70-62-194.ip.xmission.com) |
| 04:12.58 | *** join/#brlcad louipc (n=louipc@bas8-toronto63-1096667871.dsl.bell.ca) |
| 04:13.38 | *** join/#brlcad starseeker (n=CY@ip72-218-18-244.hr.hr.cox.net) [NETSPLIT VICTIM] |
| 04:13.40 | brlcad | yeesh |
| 04:16.29 | CIA-27 | BRL-CAD: 03brlcad * 10brlcad/src/ (11 files in 7 dirs): minor tweaks, preventive null terminating of strncmp'd strings |
| 04:22.16 | *** join/#brlcad SWPadnos (n=Me@dsl245.esjtvtli.sover.net) [NETSPLIT VICTIM] |
| 04:22.31 | *** join/#brlcad brlcad (n=sean@bz.bzflag.bz) [NETSPLIT VICTIM] |
| 04:24.18 | *** join/#brlcad yukonbob (n=yukonbob@198.235.198.234) [NETSPLIT VICTIM] |
| 04:42.36 | louipc | yeah what's up with freenode |
| 04:56.51 | *** join/#brlcad louipc (n=louipc@bas8-toronto63-1096667871.dsl.bell.ca) [NETSPLIT VICTIM] |
| 04:56.54 | CIA-27 | BRL-CAD: 03brlcad * 10brlcad/ (5 files in 2 dirs): the 'wall' procedural geometry generator tool was renamed to 'masonry' so as to not conflict with the commonly named 'wall' linux tool that writes a message to all users. source renamed from wall.c to masonry.c |
| 04:57.55 | *** join/#brlcad SWPadnos (n=Me@emc/developer/SWPadnos) [NETSPLIT VICTIM] |
| 05:02.15 | *** join/#brlcad SWPadnos_ (n=Me@dsl245.esjtvtli.sover.net) |
| 05:11.45 | CIA-27 | BRL-CAD: 03brlcad * 10brlcad/ (7 files in 2 dirs): rename the 'hd' hexdump utility to 'hex' as well given the similar linux facilities and cause for conflict/confusion. source renamed from hd.c to hex.c (and manpage in kind) |
| 05:11.46 | CIA-27 | BRL-CAD: 03brlcad * 10brlcad/TODO: renamed wall and hd commands, someone(tm) should review what else other than our libs that might be common conflict cases where we don't have a justifiable basis/need to keep the name |
| 05:11.46 | *** mode/#brlcad [+o brlcad] by ChanServ |
| 05:11.48 | *** join/#brlcad SWPadnos_ (n=Me@dsl245.esjtvtli.sover.net) |
| 05:11.51 | *** join/#brlcad bpoole_ (n=bpoole@UNIX38.andrew.cmu.edu) |
| 05:12.05 | *** join/#brlcad yukonbob (n=yukonbob@198.235.198.234) |
| 05:36.11 | CIA-27 | BRL-CAD: 03brlcad * 10brlcad/ (2 files in 2 dirs): obliterate BRL.MIL references |
| 05:42.40 | CIA-27 | BRL-CAD: 03brlcad * 10brlcad/ (sh/cray.sh src/fb/cell-fb.1 src/lgt/lgt.1 src/libfb/libfb.3): more brl.mil references begone |
| 05:46.05 | *** join/#brlcad SWPadnos (n=Me@dsl245.esjtvtli.sover.net) |
| 05:55.27 | CIA-27 | BRL-CAD: 03brlcad * 10brlcad/doc/ (5 files in 4 dirs): more address updating to avoid mil domain |
| 05:59.56 | *** join/#brlcad SWPadnos (n=Me@emc/developer/SWPadnos) [NETSPLIT VICTIM] |
| 06:23.43 | *** join/#brlcad akreal (n=ak@53.as-59.nienschanz.ru) |
| 06:29.09 | *** join/#brlcad brlcad (n=sean@pdpc/supporter/silver/brlcad) [NETSPLIT VICTIM] |
| 06:29.09 | *** mode/#brlcad [+o brlcad] by irc.freenode.net |
| 06:32.04 | *** join/#brlcad minute-ssh (n=MinuteEl@bz.bzflag.bz) [NETSPLIT VICTIM] |
| 06:58.11 | *** join/#brlcad minute-ssh (n=MinuteEl@silentflame/member/pdpc.base.minuteelectron) [NETSPLIT VICTIM] |
| 07:00.23 | *** join/#brlcad brlcad (n=sean@pdpc/supporter/silver/brlcad) [NETSPLIT VICTIM] |
| 07:00.23 | *** mode/#brlcad [+o brlcad] by irc.freenode.net |
| 07:14.14 | *** join/#brlcad akreal (n=ak@53.as-59.nienschanz.ru) [NETSPLIT VICTIM] |
| 07:14.14 | *** join/#brlcad starseeker (n=CY@ip72-218-18-244.hr.hr.cox.net) [NETSPLIT VICTIM] |
| 07:14.25 | *** join/#brlcad ak_ (n=ak@53.as-59.nienschanz.ru) |
| 07:20.24 | *** join/#brlcad Z80-Boy (i=clock@217-162-110-17.dclient.hispeed.ch) |
| 07:23.57 | *** join/#brlcad ak_ (n=ak@53.as-59.nienschanz.ru) |
| 07:28.20 | *** join/#brlcad starseeker (n=CY@ip72-218-18-244.hr.hr.cox.net) [NETSPLIT VICTIM] |
| 08:07.00 | *** join/#brlcad cad86 (n=cb548e7b@bz.bzflag.bz) |
| 08:25.44 | *** join/#brlcad Z80-Boy (n=clock@zux221-122-143.adsl.green.ch) |
| 08:37.37 | *** join/#brlcad Z80-Boy (n=clock@zux221-122-143.adsl.green.ch) |
| 08:52.17 | *** join/#brlcad elite01 (n=elite01@dslb-088-070-108-201.pools.arcor-ip.net) |
| 09:17.12 | *** join/#brlcad Z80-Boy (n=clock@zux221-122-143.adsl.green.ch) |
| 10:05.29 | *** join/#brlcad yukonbob (n=yukonbob@198.235.198.234) |
| 10:25.42 | *** join/#brlcad b0ef (n=b0ef@062016141081.customer.alfanett.no) |
| 10:32.00 | *** join/#brlcad Z80-Boy (n=clock@zux221-122-143.adsl.green.ch) |
| 12:55.28 | *** join/#brlcad SWPadnos (n=Me@dsl245.esjtvtli.sover.net) |
| 14:28.40 | CIA-27 | BRL-CAD: 03brlcad * 10brlcad/src/proc-db/Makefile.am: don't choke here if openNURBS is disabled! |
| 14:35.02 | ``Erik | silly coder, "linebuffer[YYLMAX} = '\0';" just don't make sense :D |
| 14:40.54 | brlcad | oop |
| 14:41.30 | ``Erik | must be a little burdened at the moment |
| 14:42.04 | brlcad | it's been having issues for over a day now |
| 14:42.15 | brlcad | depends which slot we get |
| 14:48.47 | ``Erik | ya in today? dave was in my office at 9 trying to organize a lunch posse |
| 14:49.03 | ``Erik | he was a bit miffed that we didn't take him yesterday, heh |
| 14:50.29 | ``Erik | http://icanhascheezburger.files.wordpress.com/2007/11/funny-pictures-bird-cat-cage.jpg |
| 14:52.42 | brlcad | yeah, i'm in |
| 14:56.05 | ``Erik | in the office, or in for lunch? :) |
| 14:56.52 | brlcad | yep |
| 14:57.18 | ``Erik | heh, I'm not a c++ programmer, I don't dig unresolvable ambiguity :D |
| 15:00.04 | ``Erik | hum, cool, segfaults in mged |
| 15:04.50 | brlcad | I was able to replicate the rt crash with a simple while loop on moss, on my laptop last night |
| 15:05.03 | ``Erik | get a good -ggdb core file? |
| 15:05.19 | brlcad | while [ $? -ne 0 ] ; do rt -F/dev/null db/moss.g all.g ; done |
| 15:05.35 | brlcad | not really, same stack trace I always get |
| 15:05.44 | ``Erik | erm |
| 15:05.52 | brlcad | I mean, I have the trace, it's just not really insightful |
| 15:05.59 | ``Erik | while true ; do rt ... |
| 15:06.00 | ``Erik | :D |
| 15:06.28 | ``Erik | but it was a -ggdb build, so you have all the arguments at every frame and can inspect them? or was the stack blown? |
| 15:07.15 | brlcad | while true != while [ $? -ne 0 ] |
| 15:08.00 | brlcad | stops as soon as it crashes |
| 15:08.22 | ``Erik | o |
| 15:08.35 | ``Erik | while true ; do ./rt ... || break; done :D |
| 15:08.53 | ``Erik | that's kinda my normal form *shrug* |
| 15:09.12 | ``Erik | of course, I build the command funny, I'm a vim user... so -o vi |
| 15:09.41 | brlcad | which is of course no different :P |
| 15:09.48 | brlcad | other than 11 chars vs 12 chars |
| 15:10.06 | ``Erik | of course, more than 10 ways to skin a cat |
| 15:10.54 | ``Erik | but I'd probably write the one time rt cmd, run it to make sure it does what I expect, then put the while true loop on it... then hop to the end and go "oh yeah, gotta break those" and put in the || break |
| 15:11.09 | ``Erik | rabid kbd monkey powers, ACTIVATE! |
| 15:11.42 | ``Erik | <-- ain't sayin' one is right or wrong, just noting his usual approach is different due to different ways of building "complex" commands :D |
| 15:11.51 | ``Erik | I'm "special" O.o |
| 15:12.07 | ``Erik | I'm also becoming a bit annoyed at all these mged crashes |
| 15:13.03 | brlcad | fix em! |
| 15:13.33 | brlcad | it's actually debuggable if you run with -f .. |
| 15:15.21 | ``Erik | and with -c, which is what I'm ding |
| 15:15.23 | ``Erik | doing |
| 15:16.01 | ``Erik | less mouse action with -c :D |
| 15:32.30 | ``Erik | heh |
| 15:33.30 | ``Erik | that's a old but |
| 15:33.31 | ``Erik | bug |
| 15:33.45 | CIA-27 | BRL-CAD: 03erikgreenwald * 10brlcad/src/mged/clone.c: add a break; to the -p option (been missing since the original import from GSI, wow) |
| 15:38.10 | *** join/#brlcad minute (n=MinuteEl@silentflame/member/pdpc.base.minuteelectron) |
| 15:43.22 | brlcad | minute: I see you noticed the rate that your backups were growing :) |
| 15:43.36 | minute | yeah |
| 15:44.05 | minute | I realised they were pretty pointless since there are other systems in place. So instead I will just run one before everytime I modify the code. |
| 15:44.38 | brlcad | could add rotation so they don't accumulate, just keep the last few |
| 15:45.27 | minute | Possibly, I am working on a MySql\MediaWiki XML\Files backup system for a different project so once finished with that I will see about using it here or something maybe. |
| 15:46.49 | CIA-27 | BRL-CAD: 03brlcad * 10brlcad/sh/make_dmg.sh: dynamically calculate the size that the DMG needs to be (since the 7.10.4 release already surpassed the 250MB barrier) .. and give me at least a minute to find that background image :) |
| 15:46.57 | brlcad | mmm.. I've always wanted to dump out mediawiki content as doxbook xml so it could be stored in CVS |
| 15:47.06 | brlcad | and bidirectionally edited |
| 15:47.42 | minute | I know MediaWiki can be dumped as XML, but I don't suppose it would be doxbook compatible. |
| 15:48.02 | brlcad | could be ... :) |
| 15:48.38 | minute | I'll look into it if you like. |
| 15:48.43 | minute | TBH it wouldn't be too much difficulty to write a simple parser since it is going to be similar. |
| 15:48.48 | brlcad | that'd be awesome |
| 15:48.54 | brlcad | yeah, the format is really pretty simple |
| 15:49.19 | brlcad | there's not really any aspect of mediawiki markup that I can think of that doesn't directly translate to docbook |
| 15:49.29 | minute | Cool, I'll have a look and see if I can find a way. |
| 15:49.57 | brlcad | I know these guys worked out some of the reverse path already for blender |
| 15:49.57 | brlcad | http://wiki.blender.org/index.php/Meta/DocBook_to_Wiki |
| 15:50.32 | brlcad | ooh, haven't seen this: http://meta.wikimedia.org/wiki/DocBook_XML_export |
| 15:51.09 | minute | "Note: this is a proposal page opened some years ago. No such feature exists in MediaWiki presently." |
| 15:51.33 | brlcad | yeah, though it's pretty much exactly what I'm referring to :) |
| 15:51.43 | minute | ahh |
| 15:52.07 | minute | Which DocBook version are you using? |
| 15:52.10 | brlcad | that coupled with the docbook-to-mediawiki and you'd have an exceptionally powerful round-trip system |
| 15:53.13 | brlcad | i used 4.5 for years as it was the latest stable, but 5.0 is pretty much "done" and usable now |
| 15:53.17 | brlcad | with some better features |
| 15:53.24 | brlcad | xml version, not the sgml version |
| 15:53.37 | minute | yeah, sgml is weird |
| 15:54.53 | minute | How is LDAP going, btw? |
| 15:55.01 | brlcad | wow, the make_pkg and make_dmg scripts I wrote over a year ago still work pretty much without a hitch |
| 15:55.13 | minute | hehe |
| 15:56.00 | brlcad | it's not gone anywhere since we went into release mode a week and a half ago .. I've been busy building and posting binaries, writing announcements |
| 15:56.17 | brlcad | still not done, but the release has to go out |
| 15:56.39 | brlcad | ldap is still next on my list though |
| 15:56.54 | minute | ahh, ok |
| 15:56.59 | brlcad | it really is the only thing remaining now other than testing the site on IE6 wo/ javascript |
| 15:57.15 | minute | I'll do that now. |
| 15:57.51 | minute | Ok, it is bad. |
| 15:58.16 | brlcad | yeah, I just kicked it off here.. wow |
| 15:58.35 | brlcad | i must have added some bad css or something |
| 15:59.11 | minute | mm |
| 15:59.18 | minute | Or IE is just crap ;) |
| 15:59.21 | minute | Anyway... |
| 15:59.30 | minute | I'll run it through some validators then take a look at the code. |
| 16:01.13 | PrezKennedy | IE is the best! |
| 16:03.42 | PrezKennedy | its like ive gone to the dark side or something |
| 16:04.44 | brlcad | minute: here's what I see presently: http://my.brlcad.org/tmp/ie6.jpg |
| 16:05.01 | minute | Same here |
| 16:06.20 | brlcad | notably, no header images (which actually isn't that bad.. :), and some of the bottom bezel on the boxes are bad (oddly only some), the two incorrectly expanded menu/search sections, the missing upper search bar, and the massive fonts (which I cold probably live with) |
| 16:08.11 | brlcad | weird.. it even got the correct hilight/shadow outline on the bottom search bezel and on the upper menu, but not on the other two... |
| 16:08.40 | brlcad | interesting because the two that are right, I did "by hand", the other two weren't |
| 16:09.16 | brlcad | mm.. 400MB mac universal binary installer.. |
| 16:09.20 | brlcad | biggest yet |
| 16:10.29 | ``Erik | um, since media wiki stores in a mysql database, you could just mysqldump and put the results into RCS or CVS O.o |
| 16:10.40 | minute | why? |
| 16:10.54 | minute | What would be the point in that :S |
| 16:11.02 | ``Erik | um, small footprint backups? |
| 16:11.06 | ``Erik | :D |
| 16:11.16 | minute | Ahh, ok. |
| 16:11.16 | ``Erik | that can be edited and loaded, if necessary |
| 16:11.28 | brlcad | i don't want backups, I want complete bidirectional editing |
| 16:11.29 | ``Erik | sorry, talking while catching up, and people keep walking in and asking questions |
| 16:11.35 | ``Erik | dump, edit, load |
| 16:11.35 | ``Erik | :D |
| 16:11.52 | minute | ``Erik: The trouble is passwords, email address, etc. |
| 16:11.57 | brlcad | so I can edit **in a sensible format** with a text editor, or in mediawiki |
| 16:12.19 | ``Erik | use a text editor that can make sql sensible? :> *duck* |
| 16:12.23 | brlcad | editing mysql dumps is not what I'd consider a usable format |
| 16:13.25 | brlcad | not for your average editing-person at least, docbook is pushing it but it at least has really good semantic structure and rich markup |
| 16:13.48 | brlcad | pretty sure there's already an emacs mode for that ;) |
| 16:14.05 | minute | brlcad: Is there some sort of caching on your server? |
| 16:14.09 | ``Erik | for editing live sql fields in a running rdbms? O.o |
| 16:14.11 | ``Erik | skeery |
| 16:14.21 | brlcad | minute: what do you mean? |
| 16:14.25 | brlcad | for the website? |
| 16:14.26 | ``Erik | yup, emacs is a dandy os, only thing missing is a decent editor O:-) |
| 16:14.28 | minute | Yeah |
| 16:14.40 | brlcad | ah, drupal caches results to non-registered users |
| 16:14.41 | brlcad | log in |
| 16:14.55 | minute | mm |
| 16:14.57 | ``Erik | rt matrices are the same order as opengl, right? |
| 16:15.05 | brlcad | they only get updates once every few hours iirc |
| 16:15.13 | brlcad | it's configurable (and can be turned off while you're testing if you want) |
| 16:15.23 | minute | Ahh, it was chaching in MediaWiki and Drupal. |
| 16:15.24 | brlcad | ``Erik: yeah |
| 16:15.25 | ``Erik | "C natural" right hand, etc? |
| 16:15.45 | ``Erik | opposed to the mathematical "fortran natural", or the abhorrent directx left hand, ... :D |
| 16:15.50 | brlcad | do you have a solaris build of 7.10.4 on hand anywhere? |
| 16:16.17 | brlcad | directx can suck my left-handed nut |
| 16:16.28 | ``Erik | um, no, I had a HEAD build from a few weeks ago, um |
| 16:16.35 | ``Erik | d'no if a temp reaper ate it |
| 16:16.36 | brlcad | darn |
| 16:16.55 | brlcad | widest is being a lil bitch on 7.10.4 for me |
| 16:17.02 | ``Erik | hum |
| 16:17.09 | ``Erik | using the GNU toolchain, or the ucb? |
| 16:17.20 | brlcad | gnu |
| 16:17.44 | brlcad | I tried it |
| 16:17.52 | ``Erik | no go? |
| 16:18.23 | brlcad | it booted up the install disk, booted solaris with good ol cde and did the install, but then when it was all done installing... |
| 16:18.27 | brlcad | the installed image wouldn't boot |
| 16:18.42 | brlcad | some issue finding the disk |
| 16:18.49 | brlcad | probably parallels-specific |
| 16:19.12 | brlcad | don't remember what happened with qemu |
| 16:19.21 | minute | Mmm, the code for the website is in a really really bad shape. |
| 16:19.26 | ``Erik | <parallels> ¡no mas! |
| 16:19.54 | brlcad | minute: html errors? |
| 16:20.12 | minute | Yeah, it is just awful in general. Mainly my fault though. |
| 16:20.30 | minute | s/general/genreal aswell |
| 16:20.43 | brlcad | I helped some I'm sure :) |
| 16:20.51 | minute | :P |
| 16:21.02 | brlcad | i mean, helping making it worse :) |
| 16:21.18 | minute | Yeah |
| 16:21.33 | brlcad | you're not supposed to agree! |
| 16:21.40 | minute | hehe |
| 16:21.41 | brlcad | j/k |
| 16:22.41 | brlcad | the more I got into the css, the more I realized that it wasn't quite set up to work well with drupal's theming and content management |
| 16:23.02 | brlcad | but! .. it does/did work, so it's something |
| 16:23.10 | ``Erik | http://validator.w3.org/ http://jigsaw.w3.org/css-validator/ |
| 16:23.13 | ``Erik | teh yayz |
| 16:24.08 | brlcad | 7 errors and 98 warnings |
| 16:24.09 | minute | sure |
| 16:24.37 | brlcad | looks like one might even be a typo in the .css file |
| 16:25.12 | brlcad | er, three of them even |
| 16:25.28 | brlcad | that's probably why ie6 is throwing a fit |
| 16:25.29 | PrezKennedy | brlcad, the construction company im contracted out to is doing the APG 715 Gate upgrade |
| 16:25.40 | brlcad | nifty |
| 16:25.56 | minute | Non the less a small rewrite would be nice. |
| 16:26.36 | brlcad | yeah, would tighten up the css, could remove the fluff that's not needed any more |
| 16:26.44 | brlcad | lots of duplication in there now |
| 16:26.45 | minute | And that PHP... |
| 16:26.52 | minute | YUCK is an understatement. |
| 16:27.03 | brlcad | especially now that the "look" is pretty much settled now |
| 16:27.57 | minute | Also I need to figure out some way to integrate the skin with gallery2, but gallery2 uses crappy TPL. |
| 16:28.10 | brlcad | you have a pretty decent integration going now I thought |
| 16:28.23 | brlcad | one style that applied to both nicely |
| 16:28.24 | minute | With what? |
| 16:28.27 | minute | yeah |
| 16:28.31 | brlcad | good separation of the header, footer, etc |
| 16:28.35 | minute | ahh |
| 16:29.08 | *** join/#brlcad PK (i=Matt@74.86.45.130) |
| 16:30.09 | minute | The thing that is making this really tedious is the fact that I can't use Notepad++ or Notepad2 while editing the site due to the sudoing thing - I wish there was a way to fix that. |
| 16:30.21 | minute | Well, not fix as such. |
| 16:30.37 | brlcad | howso? |
| 16:30.43 | brlcad | sudo -u www -s |
| 16:30.52 | minute | But that doesn't work with SFTP. |
| 16:31.00 | brlcad | ahh |
| 16:31.26 | brlcad | hm, well if your umask is set, can just upload as you |
| 16:31.39 | minute | hmm |
| 16:31.45 | minute | Maybe there is a way afterall. |
| 16:32.33 | brlcad | try now, fixed the mode on all the files so group perms work |
| 16:32.46 | brlcad | a bunch were 622 |
| 16:33.05 | *** join/#brlcad Elperion (n=Bary@p54877C1D.dip.t-dialin.net) |
| 16:33.56 | minute | Oh wow. |
| 16:33.57 | minute | It works. |
| 16:33.59 | minute | Thanks! |
| 16:36.48 | minute | Nope |
| 16:37.20 | minute | hmm |
| 16:39.05 | minute | brlcad: Are you doing anything to the site ATM? |
| 16:49.11 | minute | Total rewrite it is, then. |
| 16:49.19 | minute | Could be worse. |
| 16:54.25 | *** join/#brlcad elite01 (n=elite01@dslb-088-070-002-253.pools.arcor-ip.net) |
| 18:05.03 | *** join/#brlcad Apathy (i=Matt@74.86.45.130) |
| 18:05.44 | CIA-27 | BRL-CAD: 03bob1961 * 10brlcad/src/libbu/fchmod.c: Initial check-in. |
| 18:09.31 | *** join/#brlcad louipc (n=louipc@bas8-toronto63-1096667871.dsl.bell.ca) [NETSPLIT VICTIM] |
| 18:14.39 | *** join/#brlcad PK (i=Matt@74.86.45.130) [NETSPLIT VICTIM] |
| 18:24.51 | *** join/#brlcad Apathy (i=Matt@74.86.45.130) [NETSPLIT VICTIM] |
| 18:35.55 | *** join/#brlcad Elperion (n=Bary@p54877C1D.dip.t-dialin.net) [NETSPLIT VICTIM] |
| 18:35.55 | *** join/#brlcad minute (n=MinuteEl@silentflame/member/pdpc.base.minuteelectron) [NETSPLIT VICTIM] |
| 18:35.55 | *** join/#brlcad b0ef (n=b0ef@062016141081.customer.alfanett.no) [NETSPLIT VICTIM] |
| 18:35.55 | *** join/#brlcad starseeker (n=CY@ip72-218-18-244.hr.hr.cox.net) [NETSPLIT VICTIM] |
| 18:46.48 | *** join/#brlcad Elperion (n=Bary@p54877C1D.dip.t-dialin.net) [NETSPLIT VICTIM] |
| 18:46.48 | *** join/#brlcad minute (n=MinuteEl@silentflame/member/pdpc.base.minuteelectron) [NETSPLIT VICTIM] |
| 18:46.48 | *** join/#brlcad b0ef (n=b0ef@062016141081.customer.alfanett.no) [NETSPLIT VICTIM] |
| 18:46.48 | *** join/#brlcad starseeker (n=CY@ip72-218-18-244.hr.hr.cox.net) [NETSPLIT VICTIM] |
| 18:55.12 | *** join/#brlcad Elperion (n=Bary@p54877C1D.dip.t-dialin.net) [NETSPLIT VICTIM] |
| 18:55.12 | *** join/#brlcad minute (n=MinuteEl@silentflame/member/pdpc.base.minuteelectron) [NETSPLIT VICTIM] |
| 18:55.12 | *** join/#brlcad b0ef (n=b0ef@062016141081.customer.alfanett.no) [NETSPLIT VICTIM] |
| 18:55.12 | *** join/#brlcad starseeker (n=CY@ip72-218-18-244.hr.hr.cox.net) [NETSPLIT VICTIM] |
| 18:55.14 | CIA-27 | BRL-CAD: 03bob1961 * 10brlcad/src/librt/prep.c: rt_unprep() was using paths (i.e. a struct bu_ptbl) without being initialized. In fact, paths is never initialized. I'm guessing the intent was to use objs->paths. |
| 19:06.06 | *** join/#brlcad Elperion (n=Bary@p54877C1D.dip.t-dialin.net) [NETSPLIT VICTIM] |
| 19:06.06 | *** join/#brlcad minute (n=MinuteEl@silentflame/member/pdpc.base.minuteelectron) [NETSPLIT VICTIM] |
| 19:06.06 | *** join/#brlcad b0ef (n=b0ef@062016141081.customer.alfanett.no) [NETSPLIT VICTIM] |
| 19:06.06 | *** join/#brlcad starseeker (n=CY@ip72-218-18-244.hr.hr.cox.net) [NETSPLIT VICTIM] |
| 19:10.42 | CIA-27 | BRL-CAD: 03bob1961 * 10brlcad/include/fbserv_obj.h: The fbsl_fd and fbsc_fd member types should be int. |
| 19:14.35 | CIA-27 | BRL-CAD: 03bob1961 * 10brlcad/src/mged/fbserv.c: If windows call closesocket() instead of close(). |
| 19:16.08 | CIA-27 | BRL-CAD: 03bob1961 * 10brlcad/src/mged/mged_dm.h: The c_fd of struct client should be int. |
| 19:17.32 | CIA-27 | BRL-CAD: 03bob1961 * 10brlcad/src/mged/rtif.c: Using bu_fchmod() instead of fchmod. |
| 19:17.58 | brlcad | minute-ssh: not doing anything with the site atm |
| 19:18.03 | brlcad | nor back when you asked :) |
| 19:19.19 | brlcad | lemme know if you have other permission problems, I just made you the owner of all the files |
| 19:19.24 | brlcad | (all the skin files) |
| 19:20.56 | CIA-27 | BRL-CAD: 03bob1961 * 10brlcad/src/fbserv/fbserv.c: No longer calling close() in drop_client() because the call to pkg_close() already does this. |
| 19:23.12 | *** join/#brlcad MinuteElectron (n=MinuteEl@silentflame/member/pdpc.base.minuteelectron) |
| 19:24.45 | *** join/#brlcad Elperion (n=Bary@p54877C1D.dip.t-dialin.net) [NETSPLIT VICTIM] |
| 19:24.45 | *** join/#brlcad minute (n=MinuteEl@silentflame/member/pdpc.base.minuteelectron) [NETSPLIT VICTIM] |
| 19:24.45 | *** join/#brlcad b0ef (n=b0ef@062016141081.customer.alfanett.no) [NETSPLIT VICTIM] |
| 19:24.45 | *** join/#brlcad starseeker (n=CY@ip72-218-18-244.hr.hr.cox.net) [NETSPLIT VICTIM] |
| 19:26.31 | CIA-27 | BRL-CAD: 03bob1961 * 10brlcad/src/tclscripts/ (archer/Archer.tcl lib/RtControl.tcl): Apparently Itk's Toplevel widget now wants the -menu option directly. |
| 19:30.12 | CIA-27 | BRL-CAD: 03brlcad * 10brlcad/NEWS: bob found/fixed a memory deallocation bug in the raytracers |
| 19:33.41 | *** join/#brlcad Elperion (n=Bary@p54877C1D.dip.t-dialin.net) [NETSPLIT VICTIM] |
| 19:33.41 | *** join/#brlcad minute (n=MinuteEl@silentflame/member/pdpc.base.minuteelectron) [NETSPLIT VICTIM] |
| 19:33.41 | *** join/#brlcad b0ef (n=b0ef@062016141081.customer.alfanett.no) [NETSPLIT VICTIM] |
| 19:33.41 | *** join/#brlcad starseeker (n=CY@ip72-218-18-244.hr.hr.cox.net) [NETSPLIT VICTIM] |
| 19:33.43 | brlcad | MinuteElectron: lemme know if you need me to repeat what I'd said about the site :) |
| 19:34.10 | MinuteElectron | Still in my scrollback, but I am currently rewriting the skin thing so it might be gone later. |
| 19:34.33 | brlcad | okay, just said "no, not doing anything" and that you now own the files |
| 19:34.47 | brlcad | lemme know if you have any other permission problems |
| 19:35.05 | MinuteElectron | Ahh, so you saw the mess I got myself into then? |
| 19:35.05 | brlcad | that shouldn't ever be a "problem" .. what is in place just works well for other projects |
| 19:35.23 | MinuteElectron | Yeah |
| 19:35.38 | MinuteElectron | I think I have worked out how the system works now. |
| 19:35.40 | brlcad | no, I hadn't |
| 19:35.45 | MinuteElectron | Oh, ok. |
| 19:35.46 | MinuteElectron | nm |
| 19:35.47 | brlcad | just your comments |
| 19:35.51 | MinuteElectron | ok |
| 19:36.37 | CIA-27 | BRL-CAD: 03bob1961 * 10brlcad/src/rt/do.c: Using bu_fchmod() instead of fchmod(). |
| 19:40.17 | CIA-27 | BRL-CAD: 03bob1961 * 10brlcad/src/other/libregex/regerror.c: Reformat regerror() slightly. |
| 19:42.40 | *** join/#brlcad yukonbob (n=yukonbob@198.235.198.234) [NETSPLIT VICTIM] |
| 19:42.40 | *** join/#brlcad minute-ssh (n=MinuteEl@silentflame/member/pdpc.base.minuteelectron) [NETSPLIT VICTIM] |
| 19:43.02 | CIA-27 | BRL-CAD: 03bob1961 * 10brlcad/src/other/libpng/png.h: Mods to expose png_read_destroy() and png_write_destroy(). |
| 19:44.38 | CIA-27 | BRL-CAD: 03bob1961 * 10brlcad/src/other/iwidgets/pkgIndex.tcl: Update to 4.0.2 |
| 19:49.29 | CIA-27 | BRL-CAD: 03bob1961 * 10brlcad/src/libpkg/pkg.c: If windows call closesocket() instead of close(). Mods to use PKG_SEND with the proper number of parameters. Mods to have pkg_open() return the correct type on error. |
| 19:50.58 | CIA-27 | BRL-CAD: 03bob1961 * 10brlcad/src/fb/ (fb-pix.c fb-png.c): Using bu_fchmod() instead of fchmod(). |
| 19:57.27 | CIA-27 | BRL-CAD: 03bob1961 * 10brlcad/src/other/tk/generic/tkFileFilter.c: Initialize a few variables. |
| 19:58.46 | *** join/#brlcad Z80-Boy (i=clock@77-56-92-241.dclient.hispeed.ch) |
| 20:00.16 | CIA-27 | BRL-CAD: 03bob1961 * 10brlcad/src/other/tcl/generic/ (tclExecute.c tclInt.h tclIntDecls.h): Miscellaneous mods for compiling on Windows. |
| 20:02.35 | *** join/#brlcad yukonbob (n=yukonbob@198.235.198.234) [NETSPLIT VICTIM] |
| 20:02.35 | *** join/#brlcad minute-ssh (n=MinuteEl@silentflame/member/pdpc.base.minuteelectron) [NETSPLIT VICTIM] |
| 20:14.14 | *** join/#brlcad starseeker (n=CY@ip72-218-18-244.hr.hr.cox.net) [NETSPLIT VICTIM] |
| 20:22.39 | *** join/#brlcad minute (n=MinuteEl@silentflame/member/pdpc.base.minuteelectron) |
| 20:29.22 | *** join/#brlcad IriX64 (n=mariodot@bas2-sudbury98-1096601470.dsl.bell.ca) |
| 20:30.00 | IriX64 | http://www3.sympatico.ca/mario.dulisse2/haha.png :) |
| 20:40.00 | *** join/#brlcad starseeker (n=CY@ip72-218-18-244.hr.hr.cox.net) [NETSPLIT VICTIM] |
| 20:50.55 | IriX64 | http://www3.sympatico.ca/mario.dulisse2/mysystem.png <----- louipc this ones what im running |
| 20:50.59 | *** join/#brlcad starseeker (n=CY@ip72-218-18-244.hr.hr.cox.net) [NETSPLIT VICTIM] |
| 21:01.48 | minute | IriX64: Ultimate? |
| 21:01.51 | minute | Did you buy that yourself? |
| 21:02.07 | minute | And on 895MB of RAM, woah. |
| 21:11.01 | ``Erik | yeah, it was released after penultimate |
| 21:20.54 | IriX64 | paid good money for this thing, it's damn well gonna do what I want :) |
| 21:21.27 | IriX64 | 1gig of ram, the cheesy motherboard steals 128 meg for the onboard video :( |
| 21:22.13 | IriX64 | how to speed up windoze, throw memory and money at it :) |
| 21:23.50 | dtidrow_work | yep |
| 21:24.30 | IriX64 | it's building brlcad7.10.4 even as we speak though |
| 21:24.49 | brlcad | you should make an installation tarball for 7.10.4 so others can try it out |
| 21:24.55 | brlcad | (for cygwin) |
| 21:25.15 | IriX64 | just the binaries you mean? |
| 21:25.39 | IriX64 | id have to include the dll's but it could be done |
| 21:25.58 | brlcad | whatever is needed so that it runs |
| 21:25.58 | IriX64 | if i get it to compile ill do that |
| 21:26.04 | brlcad | a binary distribution |
| 21:26.07 | IriX64 | ill try |
| 21:26.08 | brlcad | for cygwin users |
| 21:26.11 | *** join/#brlcad elite01 (n=elite01@dslb-088-070-114-205.pools.arcor-ip.net) |
| 21:26.28 | brlcad | or for windows users for that matter if it doesn't require cygwin itself |
| 21:26.41 | IriX64 | if they have their xwin running itll work |
| 21:27.42 | IriX64 | -march=i486 :) |
| 21:28.02 | IriX64 | or pentium |
| 21:28.50 | IriX64 | gotta go shave, wife keeps nagging me, bbiab :) |
| 21:29.35 | *** join/#brlcad bpoole (n=bpoole@UNIX31.andrew.cmu.edu) |
| 21:29.54 | starseeker | Heh - got a helpful email from one of the Gentoo devs - they apparently REALLY don't like using /opt |
| 21:31.08 | starseeker | brlcad: Do you know who maintains the FreeBSD port? |
| 21:31.10 | ``Erik | yeah, they are a whiney lot :D |
| 21:31.11 | ``Erik | me |
| 21:31.22 | starseeker | where are you installing to? |
| 21:31.28 | ``Erik | /usr/local/brlcad |
| 21:31.36 | starseeker | Ah. |
| 21:31.57 | ``Erik | has for a long long long time |
| 21:32.33 | brlcad | at least ports uses /usr/local by default |
| 21:32.37 | starseeker | Interesting |
| 21:32.48 | ``Erik | yeah, you can override PREFIX to point to where you want |
| 21:32.55 | ``Erik | like /opt if you want the sysV style |
| 21:32.58 | brlcad | but hardly anyone does |
| 21:33.13 | ``Erik | /usr/X11R6 and /usr/Xorg went away, too, it's now all in /usr/local |
| 21:33.17 | starseeker | Gentoo dev suggested using /usr/lib/brlcad for everything and then symlinking the binaries into /usr/bin |
| 21:33.25 | ``Erik | heh |
| 21:33.28 | brlcad | interesting |
| 21:33.38 | ``Erik | cuz they'd really love having stuff like /usr/bin/wall ? |
| 21:33.39 | ``Erik | :D |
| 21:33.47 | brlcad | wall's gone now :) |
| 21:33.57 | ``Erik | in head... as of this morning... |
| 21:34.02 | brlcad | as of last night |
| 21:34.04 | ``Erik | or yesterday... O.o something, heh |
| 21:35.04 | brlcad | /usr/lib/brlcad is just as good a root as any if they don't mind the symlinks and if it preserves/isolates needing to rename things |
| 21:35.09 | starseeker | He also suggests forcing the use of system libs rather than having configure figure it out... sigh. |
| 21:35.10 | ``Erik | <PROTECTED> |
| 21:35.29 | ``Erik | do they provide tcl8.5a6 ? |
| 21:35.34 | starseeker | brlcad: I guess I'll try that - they seem to have a bee in their bonnet about opt |
| 21:35.38 | brlcad | starseeker: forcing it to use system libs is also not a problem "--disable-all" |
| 21:35.50 | starseeker | Except their tcl 8.5 ebuild is masked |
| 21:36.03 | ``Erik | debian doesn't have an 8.5 in testing, :/ |
| 21:36.09 | brlcad | so brl-cad will be masked until it's complete |
| 21:36.15 | brlcad | or make it use 8.4 |
| 21:36.19 | brlcad | with a patch |
| 21:36.33 | brlcad | though louipc seemed to indicate it didn't even need a patch |
| 21:36.56 | brlcad | not sure I believe it didn't really need a patch for everything to work, but if mged comes up, then good enough |
| 21:37.40 | starseeker | Really? |
| 21:38.18 | brlcad | yeah, code-wise 8.4 works for us just as well |
| 21:38.35 | brlcad | 8.5 was needed for updates for a specific platform features (aquatk) |
| 21:38.51 | starseeker | Hmm. Will the configure script in 7.10.4 give it a try with 8.4, or does that need patching? |
| 21:39.05 | brlcad | hindsight 20/20 and all, it's taken way longer than expected (both for tcl and for that need) |
| 21:39.14 | starseeker | heh |
| 21:39.42 | brlcad | mmmm.. it'll need patching to search for tcl8.4 |
| 21:39.52 | starseeker | OK |
| 21:39.53 | brlcad | but literally just like 4 lines |
| 21:40.05 | brlcad | head has those lines already |
| 21:40.22 | brlcad | interesting.. simcity in tcl/tk |
| 21:40.37 | ``Erik | *shudder* |
| 21:40.43 | starseeker | That should be a simple patch. |
| 21:40.52 | ``Erik | which simcity? the first one (on the c64) was pretty fun |
| 21:40.57 | brlcad | http://www.donhopkins.com/drupal/node/24 |
| 21:41.24 | brlcad | apparently maxis is giving the game to OLPC |
| 21:41.34 | ``Erik | nify |
| 21:41.38 | ``Erik | s/f/ft/ |
| 21:53.27 | ``Erik | heh |
| 21:53.56 | starseeker | Cool :-) |
| 21:54.58 | bpoole | Anyone here read xkcd? |
| 21:55.03 | ``Erik | daily. |
| 21:55.05 | starseeker | they're suggesting additional ebuilds be created for libs currently not in portage - given the trouble I've seen in the past getting ebuilds accepted, you'd think that it would be easier to have just one... |
| 21:55.09 | bpoole | I'm seeing him talk tomorrow :) |
| 21:55.13 | brlcad | ``Erik: prefix of /usr/brlcad/rel-7.10.4 ? |
| 21:55.14 | ``Erik | cool |
| 21:55.23 | ``Erik | no, default prefix |
| 21:55.50 | ``Erik | but I found where SOMEONE (won't mention his name, but he sits downstairs and lifts weights) broke it :D |
| 21:57.10 | ``Erik | O.o |
| 21:57.29 | CIA-27 | BRL-CAD: 03erikgreenwald 07STABLE * 10brlcad/configure.ac: libfb needs libsocket and libnsl on solaris |
| 22:00.01 | ``Erik | heh, and I fudged the commit message, go figure :D |
| 22:00.21 | CIA-27 | BRL-CAD: 03erikgreenwald * 10brlcad/configure.ac: MFC to pick up solaris fix |
| 22:03.35 | PrezKennedy | you guys still hanging out in the WW3 buildings? |
| 22:06.50 | CIA-27 | BRL-CAD: 03brlcad * 10brlcad/misc/win32-msvc8/asc2g/asc2g.vcproj: testing |
| 22:13.35 | ``Erik | ya even going to try an irix release? |
| 22:14.30 | ``Erik | with a 7.10.4 solaris on its way, and supposedly a windows release, the only thing that won't have a 7.10.4 binary is irix... we could have binaries across the board |
| 22:29.34 | starseeker | Mrf. Gentoo has by default itcl and itk 3.3, but it looks like the configure script doesn't see them. Arrgh. |
| 22:30.46 | starseeker | Interesting - it finds itcl.h, but doesn't see Itcl_Init |
| 22:48.17 | brlcad | you have to patch up tcl, tk, tclstubs, and tkstubs |
| 22:48.55 | brlcad | and maybe specifically patch out the -I includes for the src/other/tcl|tk flags |
| 22:49.13 | brlcad | otherwise it'll pick up a specific version number and incrtcl won't allow 8.4 |
| 22:49.47 | ``Erik | (in nmg now, btw) |
| 22:49.48 | brlcad | could be, should be |
| 22:49.52 | brlcad | heh |
| 22:49.58 | brlcad | so you got a good hour to go |
| 22:50.24 | brlcad | maybe less, that's like half-way or 2/3rds |
| 22:50.34 | ``Erik | guess it gets uploaded on tuesday :) |
| 23:04.58 | *** join/#brlcad IriX64_ (n=mariodot@bas2-sudbury98-1096601470.dsl.bell.ca) |
| 23:07.35 | *** join/#brlcad IriX64 (n=mariodot@bas2-sudbury98-1096601470.dsl.bell.ca) [NETSPLIT VICTIM] |
| 23:07.35 | *** join/#brlcad yukonbob (n=yukonbob@198.235.198.234) [NETSPLIT VICTIM] |
| 23:07.35 | *** join/#brlcad minute-ssh (n=MinuteEl@silentflame/member/pdpc.base.minuteelectron) [NETSPLIT VICTIM] |
| 23:09.23 | *** join/#brlcad minute-ssh (n=MinuteEl@silentflame/member/pdpc.base.minuteelectron) |
| 23:11.36 | *** join/#brlcad IriX64_ (n=mariodot@bas2-sudbury98-1096601470.dsl.bell.ca) [NETSPLIT VICTIM] |
| 23:16.45 | *** join/#brlcad IriX64_ (n=mariodot@bas2-sudbury98-1096601470.dsl.bell.ca) |
| 23:25.39 | *** join/#brlcad PrezKennedy (i=Matt@74.86.45.130) |
| 23:28.26 | *** join/#brlcad bpoole (n=bpoole@UNIX31.andrew.cmu.edu) [NETSPLIT VICTIM] |
| 23:53.39 | *** join/#brlcad Twingy (n=justin@74.92.144.217) |
