| 00:07.51 | mafm | Ralith: it's warning worthy because you might try to use X as argument to Y, for example |
| 00:08.16 | Ralith | okay, how do I get it to stfu? :P |
| 00:13.52 | *** join/#brlcad samrose (n=samrose@c-24-11-185-57.hsd1.mi.comcast.net) |
| 00:26.57 | mafm | Ralith: if X is first in .h before, it should be initialized before in the constructor |
| 00:27.12 | Ralith | ah, declaration order. |
| 00:27.26 | mafm | there's probably a -Wno-something to quell it |
| 00:31.37 | Ralith | eh, I think -Wall is good practice. |
| 00:32.27 | mafm | you can use -Wall and -Wno* after that, to omit specific warnings |
| 00:32.51 | mafm | especially useful if the "fault" is on the libraries you use, not on your code |
| 00:33.46 | mafm | -Wall doesn't include all warnings despite the appearance, it omits some really low importance ones |
| 00:33.54 | mafm | such as unused parameters in methods |
| 00:35.09 | Ralith | actually, it includes that |
| 00:35.15 | Ralith | >_> |
| 00:38.18 | CIA-38 | BRL-CAD: 03starseeker * r35254 10/brlcad/trunk/ (3 files in 3 dirs): Add some output options to bbsize, allow user to specify multiple objects and build the composite bounding box for all of them, add a man page |
| 00:42.59 | Ralith | pokes starseeker |
| 00:43.27 | starseeker | Ralith: saw your message |
| 00:43.31 | starseeker | odd |
| 00:43.43 | Ralith | maybe something changed between when you and I checked out trunk? |
| 00:44.01 | mafm | well, then there are others, enabled with -Wextra |
| 00:44.12 | starseeker | more likely my box - I run gentoo unstable so there may be an argument between versions or some such |
| 00:44.19 | starseeker | must run - gotta get home |
| 00:47.10 | Ralith | seeya |
| 00:47.16 | Ralith | <3 gentoo |
| 01:28.44 | *** join/#brlcad mike111 (n=mike@cadil21.kaist.ac.kr) |
| 01:28.56 | mike111 | Hi all |
| 01:31.44 | mike111 | I have a region. How do I find the area of the projection on the region on a plane, for example the x-y plane?. |
| 01:34.39 | Ralith | rtarea, maybe? |
| 01:35.30 | Ralith | mike111: yeah, I think rtarea is what you want. |
| 01:35.37 | Ralith | " rtarea - Calculate exposed and presented surface areas |
| 01:35.57 | mike111 | Hi Ralith, I can't see the command in Vol.II (MGED) |
| 01:36.03 | Ralith | it's not a mged command |
| 01:36.24 | mike111 | a raytracer? |
| 01:36.27 | Ralith | mged is the modeler. |
| 01:36.48 | Ralith | things like rt are available there mostly just as a convenience measure |
| 01:37.03 | Ralith | there are many, many BRL-CAD tools that are completely separate programs. |
| 01:37.06 | Ralith | rtarea is one of them. |
| 01:37.14 | mike111 | where is it documented? as a manpage? |
| 01:37.28 | Ralith | that's the docs I found, but there may be others |
| 01:37.33 | Ralith | I always check for manpages first |
| 01:39.20 | mike111 | Doing man area gives an `area' command in mged: Calculates an approximate presented area of one region in the mged |
| 01:39.20 | mike111 | <PROTECTED> |
| 01:42.51 | Ralith | oh, cool |
| 01:42.54 | Ralith | didn't know about that |
| 01:43.07 | mike111 | for rtarea, how do I specify which projection I want? |
| 01:43.13 | Ralith | dunno |
| 01:43.25 | mike111 | I think `area' gives the surface area and not a projection. |
| 01:43.32 | Ralith | hang around, someone else probably knows |
| 01:46.59 | mike111 | thanks for the rtarea tip |
| 01:47.59 | Ralith | np |
| 02:21.04 | *** join/#brlcad samrose (n=samrose@c-24-11-185-57.hsd1.mi.comcast.net) |
| 02:21.30 | *** join/#brlcad samrose (n=samrose@c-24-11-185-57.hsd1.mi.comcast.net) |
| 02:23.19 | starseeker | Ralith: where does g3d stash its temporary files? $HOME/.g3d? |
| 02:23.36 | starseeker | I'm thinking of the Ogre config stuff |
| 02:25.48 | Ralith | /usr/local/share/g3d right now, as bad a choice as that is |
| 02:26.42 | starseeker | nukes |
| 02:26.55 | starseeker | hmm - now I get GLX backdrop image not found: Warning |
| 02:26.55 | starseeker | Warning: Missing charsets in String to FontSet conversion |
| 02:26.56 | starseeker | Error: Shell widget menu has zero width and/or height |
| 02:27.04 | starseeker | when trying to pick a renderer |
| 02:27.30 | Ralith | uh, that may be related to no freeimage |
| 02:27.34 | Ralith | lemme send you my ogre.cfg |
| 02:27.37 | Ralith | that'll make it skip the dialog |
| 02:28.08 | *** join/#brlcad samrose (n=samrose@c-24-11-185-57.hsd1.mi.comcast.net) |
| 02:28.10 | starseeker | may as well put it on the wiki |
| 02:28.18 | starseeker | other folks may want to give it a whirl |
| 02:28.56 | Ralith | http://isitloadedyet.com/~ralith/ogre.cfg |
| 02:29.09 | Ralith | I need to modify things such that it picks a sane default instead of popping that dialog up anyway |
| 02:29.28 | Ralith | it'd probably break horribly if someone, say, set it to fullscreen or to use directx |
| 02:30.14 | Ralith | stick that in /usr/local/share/g3d |
| 02:31.59 | Ralith | any luck? |
| 02:32.10 | starseeker | grr - now it's back to |
| 02:32.11 | starseeker | Loading library ./RenderSystem_GL |
| 02:32.11 | starseeker | terminate called after throwing an instance of 'Ogre::InternalErrorException' what(): OGRE EXCEPTION(7:InternalErrorException): Could not load dynamic library ./RenderSystem_GL. System Error: ./RenderSystem_GL.so: cannot open shared object file: No such file or directory in DynLib::load at /home/cyapp/cadtoplevel/brlcad/ogre/OgreMain/src/OgreDynLib.cpp (line 90) |
| 02:32.17 | starseeker | Aborted |
| 02:32.27 | Ralith | ./? |
| 02:32.35 | starseeker | dunno |
| 02:32.51 | Ralith | is there an ogreplugins.cfg in the g3d dir? |
| 02:33.10 | starseeker | yes |
| 02:33.18 | Ralith | what's in it? |
| 02:33.28 | starseeker | # Defines plugins to load |
| 02:33.28 | starseeker | PluginFolder= |
| 02:33.28 | starseeker | Plugin=RenderSystem_GL |
| 02:33.28 | starseeker | Plugin=Plugin_OctreeSceneManager |
| 02:33.28 | Ralith | PluginFolder should be set to /usr/local/lib/OGRE |
| 02:33.30 | Ralith | ahah |
| 02:33.32 | Ralith | there's your problem. |
| 02:34.29 | starseeker | gets further now |
| 02:34.34 | starseeker | terminate called after throwing an instance of 'Ogre::FileNotFoundException' what(): OGRE EXCEPTION(6:FileNotFoundException): Cannot locate resource sphere.mesh in resource group Autodetect or any other group. in ResourceGroupManager::openResource at /home/cyapp/cadtoplevel/brlcad/ogre/OgreMain/src/OgreResourceGroupManager.cpp (line 738) |
| 02:35.03 | Ralith | that's one of those 'make install not yet supported' issues. |
| 02:35.16 | Ralith | sphere.mesh should be somewhere in your ogre checkout |
| 02:35.18 | Ralith | copy it into the g3d dir |
| 02:37.06 | starseeker | /usr/local/share/g3d/sphere.mesh |
| 02:37.09 | starseeker | right? |
| 02:37.22 | Ralith | yup |
| 02:37.26 | starseeker | still can't find it |
| 02:37.39 | Ralith | is there a resources.cfg in there? |
| 02:37.44 | starseeker | Mesh: Loading sphere.mesh. |
| 02:37.44 | starseeker | terminate called after throwing an instance of 'Ogre::FileNotFoundException' what(): OGRE EXCEPTION(6:FileNotFoundException): Cannot locate resource sphere.mesh in resource group Autodetect or any other group. in ResourceGroupManager::openResource at /home/cyapp/cadtoplevel/brlcad/ogre/OgreMain/src/OgreResourceGroupManager.cpp (line 738) |
| 02:37.48 | Ralith | it should contain: |
| 02:37.49 | starseeker | Aborted |
| 02:37.54 | Ralith | [General] |
| 02:37.54 | Ralith | FileSystem=/usr/local/share/g3d/ |
| 02:38.08 | starseeker | hmm - it's set to RBGui |
| 02:38.32 | Ralith | scrap it, drop in what I pasted |
| 02:38.40 | starseeker | yep, bing |
| 02:39.16 | starseeker | cool |
| 02:39.20 | Ralith | works? |
| 02:39.23 | starseeker | yep |
| 02:39.27 | Ralith | :D |
| 02:39.37 | starseeker | might want to fix those defaults... |
| 02:39.49 | Ralith | yeah |
| 02:39.51 | Ralith | just fixed two of them |
| 02:40.04 | Ralith | the plugindir thing and the resourcesdir thing |
| 02:40.05 | CIA-38 | BRL-CAD: 03ralith * r35255 10/rt^3/trunk/src/g3d/CMakeLists.txt: More build system improvements; installations should be somewhat less broken now. |
| 02:40.16 | Ralith | was there anything else that broke? |
| 02:40.34 | starseeker | don't think so |
| 02:40.46 | Ralith | kk |
| 02:40.48 | starseeker | might add the sphere.mesh to g3d install |
| 02:40.50 | Ralith | oh, the config file thing |
| 02:40.54 | starseeker | since we need it for now |
| 02:40.57 | starseeker | easy to get rid of |
| 02:42.43 | CIA-38 | BRL-CAD: 03ralith * r35256 10/rt^3/trunk/src/g3d/CMakeLists.txt: More build system cleanup, added autogenerate/install valid ogre.cfg. |
| 02:43.07 | mike111 | Hi all: mged hangs when I run `area' on a simple sphere region. any ideas? |
| 02:44.31 | starseeker | hmm - it's busted |
| 02:45.23 | starseeker | toss it in here: http://sourceforge.net/tracker/?group_id=105292&atid=640802 |
| 02:49.15 | mike111 | starseeker: is the SF link for me? |
| 02:49.42 | Ralith | starseeker: okay, taken care of. |
| 02:49.51 | Ralith | also switched to something prettier. |
| 02:49.55 | CIA-38 | BRL-CAD: 03ralith * r35257 10/rt^3/trunk/src/g3d/ (CMakeLists.txt OgreGLWidget.cxx knot.mesh): Changed test mesh to something more interesting, and added installation support for it. |
| 02:50.21 | Ralith | in *theory* installation should be working now. |
| 02:51.08 | CIA-38 | BRL-CAD: 03ralith * r35258 10/rt^3/trunk/src/g3d/INSTALL: Updated INSTALL. |
| 02:56.31 | Ralith | the installation test didn't actually quite work for me, but I think that was because I have a debug version of Ogre installed? |
| 02:57.29 | Ralith | OGRE_PLUGIN_DIR_REL was set to NOTFOUND for some reason. Will worry about that later. |
| 03:02.38 | *** join/#brlcad KhadorMech (n=Adder@cpe-72-224-148-98.maine.res.rr.com) |
| 03:04.05 | KhadorMech | Hi I'm trying to get brl running on my leopard mac and I keep getting "bus error". Anyone know a work-around? |
| 03:11.27 | *** part/#brlcad KhadorMech (n=Adder@cpe-72-224-148-98.maine.res.rr.com) |
| 03:36.04 | starseeker | Ralith: got the same thing |
| 03:36.07 | starseeker | NOTFOUND |
| 03:36.15 | Ralith | hm, weird. |
| 03:36.34 | Ralith | lemme try updating the cmake module |
| 03:40.40 | Ralith | didn't do any good :/ |
| 03:41.02 | Ralith | oh wel, committing anyway 'cuz presumably ogre's improved it by now |
| 03:41.53 | CIA-38 | BRL-CAD: 03ralith * r35259 10/rt^3/trunk/cmake/ (FindOGRE.cmake FindPkgMacros.cmake): Updated OGRE's cmake module (and added some stuff from OGRE's impl. of FindPkgMacros) in the hopes of improving reliability across platforms. |
| 03:51.53 | Ralith | strictly this is an OGRE-side bug |
| 03:52.16 | Ralith | since it's their cmake module that's failing to find the stuff installed by their build system. |
| 05:26.26 | mike111 | I'm trying to run rtarea from the commandline using mged -c new.g "Z;E s1.r;top;rtarea" |
| 05:27.16 | mike111 | but getting: bu_log: write error |
| 05:50.28 | Ralith | wonders why he didn't just try running rtarea itself |
| 06:23.27 | *** join/#brlcad mike111 (n=mike@cadil21.kaist.ac.kr) |
| 07:26.56 | *** join/#brlcad _clock_ (n=_sushi_@80-218-244-105.dclient.hispeed.ch) |
| 10:13.52 | *** join/#brlcad mafm (n=mafm@74.Red-83-42-152.dynamicIP.rima-tde.net) |
| 12:02.31 | *** join/#brlcad BigAToo (n=BigAToo@pool-96-230-124-27.sbndin.btas.verizon.net) |
| 12:11.40 | brlcad | Ralith: c++ initializes in the order declared, so when your initialization list doesn't match, it warns since you might be making some assumption about the order you listed |
| 12:11.58 | brlcad | doesn't matter for simple types, but especially if they're objects, you can get into bad juju |
| 12:13.06 | brlcad | the 'area' command gives projected/presented area, but just a rough approximation -- rtarea is the tool to use |
| 12:16.08 | ``Erik | totally awesome, I've gotten, like, NO mail at bz, but this morning, I get spam there. yayyyy |
| 12:16.25 | brlcad | he gets the bu_log write error because rtarea is async and mged terminates before rtarea finishes, yet it can't display the results because mged is gone |
| 12:18.06 | ``Erik | personally thinks that mged -c needs some significant attention... fixing async issues, choosing appropriate streams, etc |
| 12:19.02 | ``Erik | or; mged as a pipe tool needs attention, rather |
| 12:53.13 | ``Erik | the rotate issues I've been seeing on osX.5 are not choppiness, they seem to be that it's reading a mouse down and up and doing a zoom instead of seeing a mouse down and move to rotate |
| 12:53.20 | ``Erik | um, it zooms on mouse down |
| 12:53.37 | ``Erik | I imagine tk and apple X11.app are not playing nice |
| 12:54.04 | ``Erik | (this is on a macbook from november) |
| 13:00.24 | brlcad | ``Erik: my quick lookings seemed that it was some initialization problem on mged/libged's part |
| 13:00.53 | brlcad | as it works just fine when you first e an object, you can spin it around freely ... then once you zoom in/out, it's hosed |
| 13:01.21 | ``Erik | ok, what I was seeing, I think is related, so I'm sharing what little info I have so the people who will fix it are prepared |
| 13:01.42 | brlcad | thinks ``Erik is prepared to fix it ;) |
| 13:03.43 | ``Erik | fuck that shit, I called in sick today (stomach is bugging me) |
| 13:04.25 | ``Erik | felt awful green yesterday, went to a party on tuesday and wasn't used to the drinking and being around cigarettes and stuff |
| 13:04.35 | ``Erik | I got old. *sob* |
| 13:05.02 | d-lo | Got used to no poison and cleaner air eh? :) |
| 13:05.25 | ``Erik | well, different pollutions |
| 13:06.37 | ``Erik | d-lo, if you see the slavedriver or her minion, I wasn't able to get either by phone, nor the mathematicion. I left a VM for the boss, but a "hey, didja check your vmail?" shout would make me feel better? |
| 13:07.05 | d-lo | righto. |
| 13:07.09 | ``Erik | danke |
| 13:08.20 | ``Erik | iokit is a wreck :/ |
| 13:08.48 | ``Erik | wants to write a little program with a similar interface to batch that throw sigstop and sigcont signals based on cpu temp and/or fan speed |
| 13:09.17 | ``Erik | keep my lappy from smoking up during a rebuild of BRL-CAD :D without burning my knees |
| 13:11.29 | ``Erik | has to figure out http://pastebin.bzflag.bz/d7958bdd before he can even look at mouse events |
| 13:12.40 | ``Erik | (interesting, I put my name in as "``Erik" in the pastebin, and it reads it as "Erik".... wonder what happens if my name is "`rm -rf /`" O.o |
| 13:14.49 | ``Erik | (and, uh, it has a spam problem now.) |
| 13:15.57 | d-lo | why are tyou trying to break the pastebin? |
| 13:17.09 | ``Erik | because if I break it, then we know it's breakable and we can fix it. If someone else breaks it, it's a bad day |
| 13:17.46 | ``Erik | spent too much time as a sysadmin, thinks that's why he was pushed towards the "test developer" roll on "that project" |
| 13:17.55 | ``Erik | role |
| 13:18.15 | d-lo | Sure. Right. I know you. Its pure Malice isn't it? |
| 13:19.12 | ``Erik | hey, man, at least I'm not so deviant that I'm cracking secured encyption keys and hijacking data streams for man-in-the-middle attacks on commercial proprietary software |
| 13:19.15 | ``Erik | :D |
| 13:20.15 | ``Erik | <-- stickin' to the clasic ethos, just had a "hm, thats... interesting" moment, that's it :) |
| 13:20.40 | d-lo | riiiiiight. |
| 13:20.51 | d-lo | and its not commercial anymore :) |
| 13:22.38 | ``Erik | you'll either have to find a group of artists willing to commit and obey a common vision (EXTREMELY difficult if you don't have $'s), or run the risk of being a rogue bandit skirting the grey areas of the law :( |
| 13:23.31 | ``Erik | <-- used and was mortified by the whole bnetd situation, is gunshy |
| 13:24.16 | ``Erik | and the history of strategus... |
| 13:32.42 | brlcad | thinks he meant http://pastebin.bzflag.bz/d7958fbdd |
| 13:52.21 | *** join/#brlcad ornitorrincos (n=ilcra198@archlinux/trusteduser/ornitorrincos) |
| 13:52.25 | ornitorrincos | ho louipc |
| 13:52.48 | ``Erik | no, opengl support is not going to give you shaded displays or anything that X won't do.. and generally X will do it better |
| 13:53.05 | *** join/#brlcad pro-rsoft (n=prorsoft@unaffiliated/pro-rsoft) |
| 13:53.19 | ``Erik | oh crap, they're ALL coming here O.o :D *duck* |
| 13:53.28 | pro-rsoft | Hehe |
| 13:53.38 | ``Erik | (srry, been pimping) |
| 13:54.53 | ``Erik | so, yeah, not detecting opengl is not all that bad of a thing, we can figure out how to make it work, but it's not a show stopper |
| 13:55.30 | ornitorrincos | just curious if it was normal or I had something broken |
| 13:55.51 | ``Erik | um, if you're using linux, it SHOULD be detected |
| 13:56.07 | ``Erik | do you have the mesa dev stuff on? |
| 13:56.14 | ornitorrincos | then I probably have something broken |
| 13:56.17 | ``Erik | GL.h GLU.h etc? |
| 13:56.40 | pro-rsoft | you mean GL/gl.h |
| 13:56.49 | ``Erik | er, yeah, it's been a while |
| 13:57.09 | ``Erik | we had ogl support back to when it was irisgl and a propritary sgi thang |
| 13:57.23 | ``Erik | proprietary |
| 13:57.33 | *** join/#brlcad elena (n=elena@89.136.118.141) |
| 13:57.47 | brlcad | mornin' elena |
| 13:57.54 | elena | hi. |
| 13:58.04 | elena | how are you? |
| 13:58.09 | brlcad | great! |
| 13:58.17 | elena | I was hopping to catch one of you around. |
| 13:58.30 | ``Erik | is a square, sorry |
| 13:58.30 | elena | i'm working on conversion. |
| 13:58.31 | brlcad | busy day and slow start to it at that, but starting to get the juices flowing |
| 13:59.03 | elena | :) |
| 13:59.06 | ornitorrincos | ``Erik, yes those headrs I ahve them, checked with louipc |
| 13:59.43 | elena | are then any particular formats we want to support more than others. |
| 13:59.45 | elena | ? |
| 14:00.09 | ``Erik | ok, our ogl check starts on configure.ac:1364 |
| 14:00.48 | ``Erik | looking for libGL.so libGL2.so and libGL.dylib |
| 14:01.18 | brlcad | elena: yeah, .g :) |
| 14:01.23 | ``Erik | with minor hackery around the mac tardedness |
| 14:02.04 | elena | ok. but from what to g? |
| 14:02.12 | elena | dxf for example? |
| 14:02.32 | brlcad | followed by the more complex formats, namely iges and dxf for starters |
| 14:02.41 | elena | ok. |
| 14:02.42 | elena | thanks. |
| 14:02.46 | ``Erik | are you looking for a prioritized list of import formats? |
| 14:02.54 | elena | yes. |
| 14:02.57 | brlcad | if you want, you could just support anything we have a g-* for |
| 14:03.18 | ``Erik | *-g you mean |
| 14:03.22 | elena | i did a list for that. |
| 14:03.23 | brlcad | right |
| 14:03.24 | elena | yes. |
| 14:03.40 | elena | but for now, only with *-g and g-* |
| 14:03.50 | elena | because i need sample files to test. |
| 14:04.07 | ``Erik | but I don't think we have any document saying that "yes, we have alpha-g and beta-g, but if you have both, we'd prefer beta-g to carry geometry better" |
| 14:04.11 | elena | and I get those samples by converting from g to that format (offline) |
| 14:04.39 | ornitorrincos | libGL.so is present |
| 14:05.02 | ``Erik | um, I made a csv in src/conv/ a while back, but it's not sorted... might be nice if someone sorted it by preference? |
| 14:05.28 | ``Erik | orn: can you paste the ogl fail to a pastebin? we have pastebin.bzflag.bz :) |
| 14:09.47 | brlcad | elena: you can also find samples of most formats pretty easily by using google with the file-type keyword |
| 14:09.58 | elena | ACAD and EUCLID don't have a specific file extension? |
| 14:10.07 | ornitorrincos | umn |
| 14:10.12 | elena | i know about filetype:pdf, doc and stuff. |
| 14:10.12 | ornitorrincos | ok, who has telekinesis |
| 14:10.25 | louipc | heheh |
| 14:10.25 | brlcad | yea, like "filetype:dxf sample" |
| 14:10.36 | elena | dxf is simple. |
| 14:10.42 | elena | how about euclid? |
| 14:11.08 | ornitorrincos | louipc, now the damn opengl works |
| 14:11.11 | brlcad | lesse.. there suffix doesn't match their name like the others iirc |
| 14:11.18 | louipc | ornitorrincos: haha! ok cool |
| 14:11.44 | louipc | I preferred using openGL because X is too slow for me |
| 14:11.53 | louipc | ogl uses hardware accel and stuff |
| 14:11.58 | brlcad | (modern euclid that is) |
| 14:12.06 | louipc | but it seems to have refresh problems or something now |
| 14:12.26 | elena | thank you. for dxf, google search is a good idea. |
| 14:12.47 | elena | when i'm finished, i could it those to test some real examples. |
| 14:12.52 | ornitorrincos | and the irc log finished a few lines after I posted the error in pastebin |
| 14:13.26 | ``Erik | louipc: really? gl lines are awful slow, usually X is a lot faster :/ the whole bus transfer issue, y'know? do you have a smoking video card on a craptacular cpu? |
| 14:14.19 | elena | e.g like Erik's 8-core? |
| 14:14.29 | elena | ;) |
| 14:14.36 | louipc | ``Erik: kind of |
| 14:14.43 | ``Erik | I'm home today, just a 2 core macbook here :) |
| 14:15.02 | louipc | I run a pIII 866 MHz |
| 14:15.57 | ``Erik | that is a bit behind the curve.. but *shrug* my first two machines were measured in khz |
| 14:16.32 | ``Erik | and one of these days, I'll get around to making a vax 780 with 43bsd available on a web interface so people can experience BRL-CAD 4.x in its glory |
| 14:16.40 | ``Erik | simh++ |
| 14:17.10 | ``Erik | when things like clear or ls take a few seconds, that's nutty stuff :D |
| 14:17.20 | louipc | it's good to run old hardware, you can catch performance issues more easily ;D |
| 14:17.40 | ornitorrincos | ``Erik, for that you can do ssh over a slow connection ;) |
| 14:18.07 | ``Erik | heh, a few jobs ago, I was doing java code in a small shop, my choice hardware for development was a dual p133 with scsi's, the amd 450 was for video games :) |
| 14:18.37 | elena | :-) |
| 14:19.16 | ``Erik | DEC prioris, made an awesome coffee table... and it showed two penguins on boot O.o |
| 14:22.32 | CIA-38 | BRL-CAD: 03erikgreenwald * r35260 10/brlcad/trunk/src/conv/g-egg.c: make the vertex id unique to the file. Eliminate trailing whitespace. Etc. |
| 14:24.08 | CIA-38 | BRL-CAD: 03erikgreenwald * r35261 10/brlcad/trunk/src/adrt/libtie/tie_kdtree.c: panic mode for silliness. |
| 14:24.37 | CIA-38 | BRL-CAD: 03erikgreenwald * r35262 10/brlcad/trunk/src/librt/prep.c: irrelevent slot. |
| 15:03.27 | d-lo | is it brlcad vs the servers again today? |
| 15:05.04 | brlcad | brlcad vs monthly reports and other business mail matters |
| 15:05.21 | d-lo | ah... the fun stuff :) |
| 15:09.39 | *** join/#brlcad yukonbob (i=1000@s142-179-54-198.bc.hsia.telus.net) [NETSPLIT VICTIM] |
| 15:10.18 | *** join/#brlcad Ralith (n=ralith@216.162.199.202) [NETSPLIT VICTIM] |
| 15:16.30 | ``Erik | if you don't get the release out in time, I can push it while ya'll are out throwing beads at the pretty girls, just make sure ya bring back pics |
| 15:17.27 | ``Erik | (ya knew that, but I won't bitch any more than normal) |
| 16:27.14 | *** join/#brlcad samrose (n=samrose@ip-207-145-38-45.iad.megapath.net) |
| 17:00.14 | CIA-38 | BRL-CAD: 03bob1961 * r35263 10/brlcad/trunk/src/adrt/libtie/tie_kdtree.c: Fixed typo. |
| 17:16.58 | CIA-38 | BRL-CAD: 03bob1961 * r35264 10/brlcad/trunk/doc/docbook/system/man1/en/bbsize.xml: This is only a placeholder so that the build completes. The real file is coming. |
| 17:28.43 | CIA-38 | BRL-CAD: 03n_reed * r35265 10/brlcad/trunk/src/ (libdm/Makefile.am libdm/dm-rtgl.c tclscripts/mged/mview.tcl): turned z-clipping on by default for dm-rtgl |
| 17:40.32 | *** join/#brlcad Elrohir (n=kvirc@p5B14E1B8.dip.t-dialin.net) |
| 17:48.42 | *** join/#brlcad jdoliner (n=jdoliner@c-68-51-75-169.hsd1.il.comcast.net) |
| 17:50.28 | *** join/#brlcad hippieindamakin8 (n=hippiein@210.212.55.3) |
| 18:19.03 | CIA-38 | BRL-CAD: 03jdoliner * r35266 10/brlcad/trunk/ (include/vmath.h src/proc-db/surfaceintersect.cpp): |
| 18:19.05 | CIA-38 | BRL-CAD: adds the Jiggle get approximate intersection points closer to each other using |
| 18:19.07 | CIA-38 | BRL-CAD: newtonesque methods also adds an additional macro in vmath.h Project which |
| 18:19.13 | CIA-38 | BRL-CAD: decomposes a vector into components parallel and perpendiculur to a given vector |
| 18:33.18 | CIA-38 | BRL-CAD: 03bob1961 * r35267 10/brlcad/trunk/src/libged/erase.c: Removed a few unused variables. |
| 18:38.48 | CIA-38 | BRL-CAD: 03bob1961 * r35268 10/brlcad/trunk/src/libged/draw.c: Mod ged_addToDisplay to check if name is already in the list. If so, return the associated gdlp. |
| 18:41.58 | *** join/#brlcad hippieindamakin8 (n=hippiein@202.3.77.11) |
| 18:49.28 | CIA-38 | BRL-CAD: 03starseeker * r35269 10/brlcad/trunk/doc/docbook/system/man1/en/bbsize.xml: oops - add the bbsize man page content. |
| 19:06.32 | CIA-38 | BRL-CAD: 03bob1961 * r35270 10/brlcad/trunk/ (3 files in 3 dirs): Added code to redraw anything associated with the object being edited if it's currently being drawn. |
| 19:55.20 | *** part/#brlcad jdoliner (n=jdoliner@c-68-51-75-169.hsd1.il.comcast.net) |
| 21:18.40 | CIA-38 | BRL-CAD: 03ebautu * r35271 10/web/trunk/htdocs/more/sites/all/modules/brlcad/ (brlcad.inc brlcad.module): Moved PHP-BRLCAD interface in separate file (brlcad.inc) and implemented file conversions. |
| 21:28.10 | CIA-38 | BRL-CAD: 03n_reed * r35272 10/brlcad/trunk/ (include/dm-rtgl.h src/libdm/dm-rtgl.c): coloring with region material colors |
| 21:55.04 | CIA-38 | BRL-CAD: 03bob1961 * r35273 10/brlcad/trunk/src/libged/expand.c: This is a follow-on from the previous commit (i.e. return only database entries that match the pattern(s)). This handles the case where the pattern has no wildcards. |
| 21:57.44 | CIA-38 | BRL-CAD: 03bob1961 * r35274 10/brlcad/trunk/src/tclscripts/lib/Command.tcl: Added tab completion to the Command widget. |
| 22:17.05 | *** join/#brlcad Patmcc19_ (n=chatzill@71-223-63-203.phnx.qwest.net) |
| 22:24.03 | *** join/#brlcad Elrohir (n=kvirc@p5B14E1B8.dip.t-dialin.net) |
| 23:35.22 | *** join/#brlcad BigAToo (n=BigAToo@pool-96-230-124-27.sbndin.btas.verizon.net) |
| 23:35.43 | *** join/#brlcad Patmcc19 (n=chatzill@71-223-38-122.phnx.qwest.net) |