| 00:26.47 | *** join/#brlcad crazy_imp (~mj@a89-182-155-87.net-htp.de) |
| 01:27.36 | bhinesley | I'm getting a compile error with cmake: http://pastebin.mozilla.org/1246735 |
| 01:27.46 | bhinesley | glu.h doesn't exist |
| 01:40.13 | bhinesley | I disabled GL, and was able to compile. |
| 02:08.05 | bhinesley | disregard... I cleaned the build directory and it's working with GL enabled now, too. |
| 02:17.02 | CIA-61 | BRL-CAD: 03bhinesley * r44876 10/brlcad/trunk/src/proc-db/sketch.c: Applied patch 3247828, submitted by myself. Fixed sketch usage statment so that it isn't always printed, and clarified the output when an argument is mistakenly provided |
| 02:40.11 | brlcad | dloman: hehe |
| 02:40.16 | brlcad | where'd that pic come from? |
| 02:43.49 | CIA-61 | BRL-CAD: 03bhinesley * r44877 10/brlcad/trunk/src/tclscripts/archer/ArcherCore.tcl: |
| 02:43.49 | CIA-61 | BRL-CAD: Applied patch 3309910, submitted by myself. It makes Archer's opendb command |
| 02:43.49 | CIA-61 | BRL-CAD: behave like more mged when no arguments are supplied. It prints the database |
| 02:43.49 | CIA-61 | BRL-CAD: name if it is in memory only, or it prints the path to and name of the database |
| 02:43.49 | CIA-61 | BRL-CAD: if it is saved on disk. |
| 02:50.03 | *** join/#brlcad Ralith (~ralith@S010600221561996a.vc.shawcable.net) |
| 02:50.09 | CIA-61 | BRL-CAD: 03bhinesley * r44878 10/brlcad/trunk/src/tclscripts/archer/ArcherCore.tcl: Applied patch 3309107, submitted by myself. It adds a closedb command to Archer, which simply loads an empty database in memory, like when Archer is first started. |
| 02:57.57 | CIA-61 | BRL-CAD: 03bhinesley * r44879 10/brlcad/trunk/src/tclscripts/archer/ArcherCore.tcl: Applied patch 3267991, submitted by myself. The commands 'q' and 'exit' are already available in Archer; this adds the 'quit' synonym. |
| 02:59.20 | CIA-61 | BRL-CAD: 03brlcad * r44880 10/brlcad/trunk/NEWS: bhinesley made Archer's opendb command behave like mged when no arguments are supplied. It prints the name if the database is in memory only, or it prints the absolute path if the database is saved on disk. |
| 03:00.28 | CIA-61 | BRL-CAD: 03brlcad * r44881 10/brlcad/trunk/BUGS: opening a database with the same name as a command (in archer) reportedly (by bhinesley) doesn't work |
| 03:01.33 | CIA-61 | BRL-CAD: 03brlcad * r44882 10/brlcad/trunk/NEWS: bhinesley added the missing closedb command to archer as well, calls Load '' which closes the current database and opens an empty one like when archer first starts up. |
| 03:17.46 | CIA-61 | BRL-CAD: 0399.144.90.118 07http://brlcad.org * r2917 10/wiki/User:Bhinesley: /* Log */ today, and plan tomorrow |
| 03:33.51 | *** part/#brlcad Ralith (~ralith@S010600221561996a.vc.shawcable.net) |
| 06:52.01 | *** join/#brlcad Stattrav (~Stattrav@122.167.241.15) |
| 06:52.01 | *** join/#brlcad Stattrav (~Stattrav@unaffiliated/stattrav) |
| 08:17.03 | *** join/#brlcad mafm (~mafm@183.Red-81-32-97.dynamicIP.rima-tde.net) |
| 09:29.44 | *** join/#brlcad Stattrav (~Stattrav@111.93.134.142) |
| 09:29.44 | *** join/#brlcad Stattrav (~Stattrav@unaffiliated/stattrav) |
| 14:00.55 | *** join/#brlcad merzo (~merzo@193.254.217.44) |
| 15:00.55 | *** join/#brlcad mafm (~mafm@183.Red-81-32-97.dynamicIP.rima-tde.net) |
| 15:25.00 | *** join/#brlcad Stattrav (~Stattrav@122.172.247.68) |
| 15:25.00 | *** join/#brlcad Stattrav (~Stattrav@unaffiliated/stattrav) |
| 16:09.35 | brlcad | mm, some nice features coming in the subversion 1.7 update |
| 16:23.32 | CIA-61 | BRL-CAD: 03brlcad * r44883 10/brlcad/trunk/ (42 files in 25 dirs): convert about 180 calls to NEAR_ZERO() to NEAR_EQUAL() where the intent seems (via the a - b = 0 trick) to be comparing for equality. improves readability. |
| 16:24.07 | starseeker | brlcad: are they close to releasing 1.7? |
| 16:28.02 | CIA-61 | BRL-CAD: 03brlcad * r44884 10/brlcad/trunk/doc/deprecation.txt: BU_EXTERN and BU_ARGS are pre-c89 accommodations, no longer needed and minimally impacting to remove them |
| 16:42.18 | CIA-61 | BRL-CAD: 03brlcad * r44885 10/brlcad/trunk/doc/deprecation.txt: BU_EXTERN() is a macro and a bit more tricky to isolate properly, but still minimally impacting. |
| 16:48.39 | CIA-61 | BRL-CAD: 03starseeker * r44886 10/brlcad/trunk/src/tclscripts/archer/ArcherCore.tcl: Archer's use of the search command needed updating after the syntax change - fixed highlighting of related items in Archer. |
| 16:51.35 | CIA-61 | BRL-CAD: 03starseeker * r44887 10/brlcad/trunk/NEWS: |
| 16:51.36 | CIA-61 | BRL-CAD: Archer's tree widget can optionally highlight combinations that would be |
| 16:51.36 | CIA-61 | BRL-CAD: impacted by the editing of the currently selected component - that feature |
| 16:51.36 | CIA-61 | BRL-CAD: relied on search, and the syntax change threw it off. Fixed syntax, behavior |
| 16:51.36 | CIA-61 | BRL-CAD: restored. |
| 17:09.15 | CIA-61 | BRL-CAD: 03brlcad * r44888 10/brlcad/trunk/doc/deprecation.txt: have been using emacs syntax to date, but change over to perl syntax so we can easily show users how to apply a minimally impacting regex to their file(s) |
| 17:15.27 | CIA-61 | BRL-CAD: 03brlcad * r44889 10/brlcad/trunk/doc/deprecation.txt: untested, but this should swap them from emacs regexp quoting to perl quoting |
| 17:17.17 | CIA-61 | BRL-CAD: 03brlcad * r44890 10/brlcad/trunk/doc/deprecation.txt: meant slurp mode, not code 7 |
| 17:34.49 | *** join/#brlcad mafm (~mafm@193.153.199.74) |
| 17:44.24 | bhinesley | starseeker: You said that it's possible to run Archer from the build directory uninstalled... but it's still using the installed tcl scripts for me. What's the trick? |
| 17:45.04 | bhinesley | I did a cmake build out of the source directory |
| 17:46.26 | bhinesley | *outside of |
| 17:50.36 | *** join/#brlcad Stattrav (~Stattrav@111.93.134.142) |
| 17:50.36 | *** join/#brlcad Stattrav (~Stattrav@unaffiliated/stattrav) |
| 18:15.58 | starseeker | bhinesley: if you have an installed BRL-CAD in the same directory as your CMAKE_INSTALL_PREFIX, BRL-CAD will look there first for dat |
| 18:16.01 | starseeker | data even |
| 18:16.16 | bhinesley | oh, alright :) |
| 18:16.37 | starseeker | you can either a) re-build BRL-CAD with CMAKE_INSTALL_PREFIX set to a directory where there is no BRL-CAD or b) remove the installed version |
| 18:16.46 | starseeker | I get bit by that once in a while too |
| 18:17.18 | ``Erik | starseeker: "Consider a Spherical Cow: A Course in Environmental Problem Solving" by John Harte ( http://en.wikipedia.org/wiki/Spherical_cow ) |
| 18:17.19 | bhinesley | anything to save time testing |
| 18:17.20 | starseeker | usually what I'll do is pass -DCMAKE_BUILD_TYPE=Debug - that sets the install directory to ../brlcad-install relative to the build directory (IIRC) |
| 18:17.31 | starseeker | ``Erik: heh, yep :-) |
| 18:18.00 | starseeker | bhinesley: then, as long as you don't have the brlcad-install actually installed, you can run successfully from the build directory |
| 18:18.13 | starseeker | or brlcad-install actually populated rather |
| 18:18.39 | bhinesley | alright, I'll give that a go |
| 18:18.40 | ``Erik | "wanted dead or alive: schrödinger's cat" |
| 18:19.00 | starseeker | <snort> I think that's wanted dead AND alive :-O |
| 18:19.12 | starseeker | :-P |
| 18:19.37 | ``Erik | "a seminar on time travel will be held two weeks ago" |
| 18:19.45 | ``Erik | there's pretty corny :D |
| 18:20.04 | starseeker | sooo... you found the bottom of the internet? :-P |
| 18:20.20 | ``Erik | it's not as bad as /b/ |
| 18:23.11 | *** join/#brlcad athena0 (~ed@ppp-70-226-169-88.dsl.mdsnwi.ameritech.net) |
| 18:26.48 | starseeker | hmm - an auction company in Dallas, TX called Heritage Auctions is selling dinosaur skeletons |
| 18:27.00 | starseeker | just the thing to put up in the living room :-P |
| 18:27.29 | starseeker | (talk about an efficient way to scare little kids...) |
| 18:29.36 | bhinesley | psh... not my kids. They'd be all over it. |
| 18:36.29 | athena0 | I'm having a brain-fart... brlcad is complaining about a missing library before compile, and I can't seem to resolve it. |
| 18:36.46 | athena0 | $ grep "Xi library" config.log |
| 18:36.53 | athena0 | configure:28705: WARNING: X11 support is enabled but the Xi library was not found. |
| 18:37.00 | bhinesley | mesagl, I believe |
| 18:37.09 | bhinesley | hold on |
| 18:37.16 | athena0 | $ sudo aptitude search libxi | grep "X11 Input" |
| 18:37.21 | athena0 | i libxi-dev - X11 Input extension library (development h |
| 18:37.30 | athena0 | i libxi6 - X11 Input extension library |
| 18:37.38 | athena0 | p libxi6-dbg - X11 Input extension library (debug package |
| 18:38.11 | athena0 | Have I forgotten something obvious here? |
| 18:42.47 | *** join/#brlcad EricZZZ (~EricZZZ@ppp-70-226-169-88.dsl.mdsnwi.ameritech.net) |
| 18:44.17 | bhinesley | athena0: I'm pretty sure there is a mesa library missing, but I'm having trouble proving that. |
| 18:44.29 | bhinesley | I've had that warning before |
| 18:46.22 | athena0 | I don't suppose there'd be any harm in just installing xlibmesa-gl and xlibmesa-gl-dev and giving it another shot |
| 18:46.36 | bhinesley | nods |
| 18:46.39 | bhinesley | sorry I can't say for sure |
| 18:52.45 | *** part/#brlcad bhinesley (~bhinesley@99.144.90.118) |
| 18:52.51 | *** join/#brlcad bhinesley (~bhinesley@99.144.90.118) |
| 18:53.55 | athena0 | Arg. No dice. Still complaining about Xi library not found |
| 18:54.12 | bhinesley | athena0: Yeah, I see it now. The message is coming from configure.ac:1220 |
| 18:54.18 | bhinesley | libxi, allegedly |
| 18:55.00 | bhinesley | so maybe you need to do a "make clean" or something |
| 18:56.10 | athena0 | Worth a shot. ... |
| 18:57.23 | athena0 | No, still complaining during ./configure after a make clean |
| 18:57.37 | bhinesley | :-/ |
| 18:58.33 | athena0 | My system seems pretty convinced it's got the libxi packages. Any chance it's just hid them away in some strange directory structure? Maybe this could be solved with a well-placed "ln -s" |
| 19:01.36 | bhinesley | do a `sudo updatdb && locate libXi.so` |
| 19:01.45 | bhinesley | mine are in /usr/lib and /usr/lib64 |
| 19:03.39 | CIA-61 | BRL-CAD: 03kunigami * r44891 10/brlcad/trunk/src/liboptical/ (5 files): Discovered that OSLRender only leaks memory if called by sh_osl. I've copied the osl raytracer into osl_rt in such a way that it calls OSLRender class. Valgrind did not identified the memory leaks present in the rt run |
| 19:03.54 | athena0 | $ sudo updatedb && locate libXi.so |
| 19:04.16 | athena0 | <PROTECTED> |
| 19:04.21 | athena0 | <PROTECTED> |
| 19:04.27 | athena0 | <PROTECTED> |
| 19:13.14 | bhinesley | athena0: do you have libx11-dev installed? |
| 19:16.07 | athena0 | Yep. |
| 19:16.08 | athena0 | $ sudo updatedb && locate libx11-dev |
| 19:16.12 | athena0 | <PROTECTED> |
| 19:16.49 | athena0 | (output truncated ...) |
| 19:17.03 | bhinesley | yeah, I believe ya |
| 19:19.41 | athena0 | Would it be possible for the .deb file available for download to work on my machine when the source doesn't look like it's going to compile? |
| 19:20.08 | bhinesley | yeah |
| 19:20.24 | athena0 | ah. Then I'm gonna give that a shot. |
| 19:21.01 | bhinesley | good idea :) |
| 19:44.22 | CIA-61 | BRL-CAD: 03bhinesley * r44892 10/brlcad/trunk/src/tclscripts/archer/ (Archer.tcl CombEditFrame.tcl): |
| 19:44.22 | CIA-61 | BRL-CAD: Adding '-sorted' to lsearch's in few places where it's clear that the given list |
| 19:44.22 | CIA-61 | BRL-CAD: was A) sorted '-increasing' B) sorted as ASCII text C) was not modified before |
| 19:44.22 | CIA-61 | BRL-CAD: the search D) not sorted with any of '-all'/'-not'/'-glob'/'-regexp'. This |
| 19:44.22 | CIA-61 | BRL-CAD: option results in increased performance, since it forces lsearch to do a binary |
| 19:44.22 | CIA-61 | BRL-CAD: search, rather than the default linear search. |
| 19:44.23 | CIA-61 | BRL-CAD: Of all 58 instances of lsort in BRL-CAD tcl scripts that were inspected, only 3 obvious cases of missing 'lsearch -sorted' options were found following them. |
| 20:00.57 | *** join/#brlcad roberthl (~robert@v1.rhl.me.uk) |
| 20:00.57 | *** join/#brlcad roberthl (~robert@mediawiki/RobertL) |
| 20:04.24 | athena0 | Seems to work! |
| 20:04.45 | athena0 | bhinesley: Thanks very much for your help. |
| 20:05.14 | bhinesley | athena0: no problem, I wish could have helped more |
| 20:10.40 | *** join/#brlcad Stattrav (~Stattrav@117.192.142.11) |
| 20:10.40 | *** join/#brlcad Stattrav (~Stattrav@unaffiliated/stattrav) |
| 20:21.58 | CIA-61 | BRL-CAD: 03bhinesley * r44893 10/brlcad/trunk/src/tclscripts/archer/ArcherCore.tcl: Realigned the definition of mArcherCoreCommands, which was getting a little out of hand |
| 20:47.31 | CIA-61 | BRL-CAD: 03bhinesley * r44894 10/brlcad/trunk/src/tclscripts/archer/ArcherCore.tcl: Indented a multi-line string. |
| 21:03.21 | CIA-61 | BRL-CAD: 03starseeker * r44895 10/brlcad/trunk/TODO: Archer search usage fixed, note problems being seen with rtwizard. |
| 21:05.58 | starseeker | I think with that can't find Xi libs thing you might to call out the x11 location using --with-x11 or some such... I ran into something similar once. |
| 21:06.07 | starseeker | wonder if CMake build would have worked |
| 21:07.35 | starseeker | really needs to have another go at getting RamDebugger running and see if it would help the Tcl/Tk development process... |
| 21:10.51 | bhinesley | starseeker: I had the problem once before too, but I can't remember what I did. I thought it was due it some package I installed, because once it was fixed it never came back. |
| 21:12.50 | bhinesley | RamDebugger looks neat |
| 21:17.51 | starseeker | bhinesley: heh - don't be tempted to waste too much time on it though - I have a feeling getting it working with BRL-CAD could be a bit of a trick |
| 21:18.30 | bhinesley | I'm sure |
| 21:19.44 | starseeker | I'd have to start by hooking it all into our CMake tclscripts logic, and then fixing whatever needs fixing |
| 21:19.56 | starseeker | and figure out which pieces (e.g. tkcvs) we could ditch |
| 21:20.27 | bhinesley | Speaking of which, is there any chance of distcc working? I've tried, but it complained that it wasn't a valid compiler. |
| 21:20.57 | bhinesley | it worked alright with automake |
| 21:21.13 | starseeker | urm |
| 21:22.20 | bhinesley | not that it's a big deal :) |
| 21:22.32 | starseeker | looking over CMake list archives... |
| 21:22.57 | starseeker | CC=distcc gcc" cmake ../brlcad ? |
| 21:23.13 | bhinesley | yeah, it dies |
| 21:23.25 | starseeker | dies how? |
| 21:23.54 | bhinesley | something about distcc not passing compiler checks... I'll try it again in a bit and let you know. I'm doing another build right now. |
| 21:24.06 | starseeker | huh. k |
| 21:24.50 | starseeker | looks like distcc has come up before: http://www.cmake.org/pipermail/cmake/2008-January/019292.html |
| 21:35.03 | bhinesley | starseeker: http://pastebin.mozilla.org/1247430 |
| 21:35.33 | starseeker | erm. distcc works in isolation? |
| 21:36.01 | bhinesley | it uses gcc/g++ |
| 21:36.19 | starseeker | I mean if you run the line # |
| 21:36.20 | starseeker | I mean if you run the line /usr/bin/distcc gcc -o CMakeFiles/cmTryCompileExec.dir/testCCompiler.c.o -c |
| 21:36.23 | starseeker | # /home/bhinesley/brlcad-trunk/build/cmake-withogl-distcc/CMakeFiles/CMakeTmp/testCCompiler.c |
| 21:36.47 | starseeker | and then linke it: # |
| 21:36.47 | starseeker | and then linke it: /usr/bin/distcc gcc CMakeFiles/cmTryCompileExec.dir/testCCompiler.c.o -o |
| 21:36.50 | starseeker | # cmTryCompileExec -rdynamic |
| 21:36.54 | starseeker | er link it even |
| 21:38.00 | bhinesley | I'm not sure if the "gcc" is supposed to be there or not |
| 21:38.49 | starseeker | bhinesley: maybe not - I'd experiment with it "in isolation" to make sure you can get it to work, first |
| 21:42.22 | bhinesley | oh, I see what you mean |
| 21:44.41 | starseeker | hrm... looks like tktreectrl would need a CMake build file... |
| 21:44.47 | starseeker | fights the temptation... |
| 22:03.33 | bhinesley | what does the debug flag do besides change the install directory? |
| 22:50.27 | *** join/#brlcad Yoshi47 (~jan@d72-39-60-53.home1.cgocable.net) |
| 23:07.27 | starseeker | bhinesley: adds -g flag, few other compiler flags |
| 23:19.11 | *** join/#brlcad mafm (~mafm@95.Red-88-22-160.staticIP.rima-tde.net) |
| 23:32.58 | CIA-61 | BRL-CAD: 03brlcad * r44896 10/brlcad/trunk/ (10 files in 6 dirs): stop using BU_ARGS, just list the arguments. c89/posix lets us move forward. |
| 23:50.15 | *** join/#brlcad archivist_emc (~archivist@host81-149-189-98.in-addr.btopenworld.com) |