| 00:08.24 | zero57 | RONNCC: Sean did say that they had a git repo running though |
| 00:08.40 | RONNCC | zero57: maybe it's just me ... doesn't look updated but idk |
| 00:08.43 | zero57 | anyways, I installed svn and are using it right now |
| 00:09.34 | zero57 | yeah, that's why I asked ;p it didn't seemed like an updated version of brlcad |
| 00:10.17 | *** join/#brlcad lachlanp (~lachlan@ppp226-79.static.internode.on.net) |
| 00:29.08 | RONNCC | ... anyone here? any mods? |
| 00:40.44 | *** join/#brlcad caen23 (~caen23@92.81.204.43) |
| 01:03.43 | RONNCC | ....... |
| 01:03.45 | RONNCC | ok seriously no one? |
| 01:09.14 | *** join/#brlcad GrantMercer015 (~GrantMerc@103.5.142.5) |
| 01:09.41 | lachlanp | seems like no mods atm |
| 01:10.42 | GrantMercer015 | how long should i generally expect to wait before knowing if my task is complete (task requires code modification). I'm super excited to find out if i finished the task. = |
| 01:15.38 | lachlanp | it depends greatly |
| 01:15.49 | lachlanp | on the mentors available |
| 01:18.21 | GrantMercer015 | its been about 15-16 hours since i submitted it, you think i should be hearing my answer pretty soon? |
| 01:18.28 | lachlanp | hmm probably |
| 01:18.32 | lachlanp | thats getting on a bit |
| 01:19.04 | lachlanp | wonder what Notify bot is doing... nothing being posted here |
| 01:19.20 | lachlanp | maybe its turned off |
| 01:20.04 | GrantMercer015 | could be going under an update, maybe a task was to modify a part of the bot and they're switching out O.o |
| 01:20.25 | lachlanp | ~6h ago i had a task marked complete |
| 01:26.09 | GrantMercer015 | aww, mine still has that "needsreview" label. Oh well, i bet they'll eventually get to it! |
| 01:27.39 | lachlanp | yeah |
| 01:27.50 | *** join/#brlcad kanzure (~kanzure@131.252.130.248) |
| 01:28.14 | lachlanp | brlcad wanted to start a rumor that you can't do any more tasks if you miss the deadline ;-) |
| 01:28.28 | lachlanp | well sortof |
| 01:28.59 | RONNCC | ... |
| 01:29.06 | RONNCC | yeah i don't know why no one is here -.-" |
| 01:29.13 | RONNCC | they were here ... yesterday and at 12 |
| 01:29.14 | RONNCC | but not now |
| 01:29.29 | RONNCC | anyone wanna try beeping thme? |
| 01:29.30 | RONNCC | *them |
| 01:30.05 | lachlanp | patience |
| 01:30.08 | lachlanp | :-) |
| 01:30.13 | lachlanp | they will eventually be here |
| 01:30.49 | lachlanp | (+ they don't like a large backlog of "where are the mods" etc) |
| 01:32.30 | *** join/#brlcad archivist (~archivist@host81-149-189-98.in-addr.btopenworld.com) |
| 01:47.08 | *** join/#brlcad Skriptkid (~Skriptkid@117.202.63.71) |
| 01:48.28 | RONNCC | ..... |
| 01:48.29 | RONNCC | but :c |
| 01:54.08 | *** part/#brlcad zero57 (~an@211.224-ppp.3menatwork.com) |
| 01:59.47 | Skriptkid | Review needed. Task key: 7983225. SA of one sheet hyperboloid |
| 02:06.06 | RONNCC | ... no one is here :( |
| 02:06.12 | RONNCC | can i have my own party :P |
| 02:18.43 | RONNCC | ... la di dah di da |
| 02:18.51 | RONNCC | dances with himself in a circle .____. |
| 02:59.49 | RONNCC | .. |
| 02:59.52 | RONNCC | ok actually? |
| 02:59.54 | RONNCC | no one? |
| 03:43.15 | RONNCC | guys |
| 03:43.18 | RONNCC | i will melt here |
| 03:43.24 | RONNCC | like just melt all over the code |
| 03:45.58 | lachlanp | whats your question? |
| 03:47.22 | lachlanp | or problem etc |
| 03:49.22 | *** kick/#brlcad [RONNCC!~sean@BZ.BZFLAG.BZ] by brlcad (behavior not cool, second warning to please read http://brlcad.org/wiki/IRC and stop asking if people are here) |
| 03:49.36 | brlcad | sighs |
| 03:51.02 | lachlanp | :-( |
| 03:51.49 | lachlanp | is the notify bot down? no comment/revision noise around |
| 03:55.04 | brlcad | apparently, he's been working on it lately and it gets stuck |
| 03:55.20 | lachlanp | ok |
| 04:03.12 | brlcad | !notify week |
| 04:03.13 | Notify | BRL-CAD: carlmoore:298, brlcad:98, starseeker:88, n_reed:62, bob1961:19, jordisayol:16, caen23:14, r_weiss:12, erikgreenwald:11, popescuandrei:5, d_rossberg:4 |
| 04:03.14 | Notify | BRL-CAD Wiki: Sean:31, Minichrispy:24, Gala:11, Jacksixb:6, 128.63.32.74:3, YolandeskzwvwzbwjStumph:1, Erik:1, 98.234.4.242:1 |
| 04:03.29 | brlcad | so it's not dead dead, but not posting |
| 04:24.58 | *** join/#brlcad twitch (~javamonn@108.223.142.86) |
| 04:26.26 | twitch | So, I'm working on a 'B' model, and I worked out the problem of fitting it all into one region, but I can't figure out how to convert the .g to ascii like Mr. Rossberg suggested. Can anyone help me out? |
| 04:27.48 | javamonn | I guess this nick would be better |
| 04:28.57 | lachlanp | hi brlcad: have you got any conventions on defining functions at the top of the code and then declaring them later? |
| 04:29.06 | lachlanp | (or the other way round if i've got it wrong) |
| 04:29.16 | lachlanp | it might make reading the tests easier |
| 04:30.39 | javamonn | I'm pretty sure you declare at the top anyways as just a C convention, makes thing easier on the compiler |
| 04:30.44 | javamonn | don't ask me though |
| 04:31.46 | lachlanp | is there such a thing as 'making things easier' for the compiler? ;-) |
| 04:32.03 | lachlanp | it lets you define them out of order then |
| 04:32.10 | lachlanp | but its probably mostly for the people |
| 04:37.48 | *** join/#brlcad RONNCC (ad49766b@gateway/web/freenode/ip.173.73.118.107) |
| 04:38.14 | javamonn | C has always been funky like that. Your supposed to declare all your functions as far up as you can with the proper return type otherwise the compiler will just pick the first call of the function as the signature, I believe. Things get screwy when you start to overload functions. |
| 04:38.25 | javamonn | good ol' K&R |
| 04:38.26 | RONNCC | brlcad: why? I was loitering for some 8 hours now.. i joined and disjoined a few times. that's why the multiple ones... not because i keep asking ~ i thought i may have missed someone |
| 04:38.38 | RONNCC | except for the dancing part |
| 04:38.41 | RONNCC | that was me |
| 04:40.21 | *** join/#brlcad mansi22 (~Mansi@182.64.83.125) |
| 04:42.09 | RONNCC | brlcad: anyway i can check if people have joined in between when i leave or something? ex. restart computer? --> sorry for the multiple asking. yeah i read the irc thing yesterday |
| 04:50.13 | *** join/#brlcad RONNCC (ad49766b@gateway/web/freenode/ip.173.73.118.107) |
| 04:50.17 | *** join/#brlcad RONNCC (ad49766b@unaffiliated/ronncc) |
| 04:50.17 | *** join/#brlcad RONNCC (ad49766b@gateway/web/freenode/ip.173.73.118.107) |
| 04:50.30 | RONNCC | what's the size of the GCI code check queue at the moment? |
| 05:13.51 | *** join/#brlcad GrantMercer015 (GrantMerce@p23184-ipngn100301fukuokachu.fukuoka.ocn.ne.jp) |
| 05:14.49 | mansi22 | hi all |
| 05:14.56 | lachlanp | hi |
| 05:15.19 | RONNCC | lachlanp: they're not here Q_Q |
| 05:15.35 | RONNCC | lachlanp: brlcad was here for like 1 minute to kick me off for too many "where is everyone" or something :( |
| 05:15.46 | mansi22 | i'm getting issues while open VS project. It stucks. I'm assuming i did something wrong with CMake |
| 05:17.51 | lachlanp | visual studion |
| 05:17.54 | lachlanp | *studio |
| 05:18.04 | lachlanp | of the brlcad source |
| 05:31.23 | brlcad | RONNCC: this is seriously your last warning, your being an asshat |
| 05:32.01 | *** join/#brlcad harmanpreet (~chatzilla@124.253.74.97) |
| 05:32.34 | RONNCC | brlcad: ok. approve my patch please |
| 05:32.50 | RONNCC | brlcad: this is also the most unresponsive org in GCI i've seen so far |
| 05:32.56 | brlcad | do you act like this in person? |
| 05:33.16 | RONNCC | brlcad: oh jees this is painful. please just tell me whats wrong with my patch or approve it so we can get on with this |
| 05:33.23 | brlcad | we've been crazy responsive all week and monday was the first day there has been a slight backlog |
| 05:33.49 | brlcad | RONNCC: I think you should just withdraw your work and move on if it's that painful to you |
| 05:33.59 | brlcad | we're allotted 36 hours |
| 05:34.05 | brlcad | most of our tasks are reviewed within 12 |
| 05:34.06 | RONNCC | brlcad: this is true. my bad |
| 05:34.27 | RONNCC | i didn't see monday sorry about that |
| 05:34.34 | brlcad | most of our students have been patient and curteous as well |
| 05:34.48 | RONNCC | i see |
| 05:35.15 | RONNCC | so what is the queue now? |
| 05:37.09 | brlcad | answering that will not help you be more patient nor help me review remaining tasks more quickly |
| 05:37.18 | brlcad | as has been obvious, you'll just keep asking where you're at |
| 05:37.20 | brlcad | i can share |
| 05:37.35 | brlcad | that they'll all be reviewed within the hour |
| 05:37.39 | RONNCC | wow |
| 05:38.29 | lachlanp | do you have a life atm brlcad? |
| 05:39.19 | brlcad | lachlanp: I've put in around 90 hours into gci over the past 8 days |
| 05:39.27 | brlcad | lachlanp: so not entirely ;) |
| 05:39.43 | lachlanp | ok :-) |
| 05:39.48 | lachlanp | big commitment |
| 05:40.06 | brlcad | that's also why patience it thin for people that aren't respectful of the time of others, we're all volunteers working hard and (usually) having a great time :) |
| 05:41.01 | brlcad | few people get on a bad side, that's frankly the first warranted kick we've had in our channel in over a year at least |
| 05:41.20 | brlcad | and now back to reviews |
| 05:44.34 | RONNCC | ahh.... sorry about that brlcad: i thought you did this sort of part time and shared it with the other devs here |
| 05:44.44 | RONNCC | brlcad: sorry to wear on your patience >___< |
| 05:49.50 | brlcad | other devs are also contributing massive amounts of time as well |
| 05:50.23 | RONNCC | yup. sorry mate |
| 05:50.29 | brlcad | it's a big undertaking to be interacting with a 100, well, newbies simultaneously |
| 05:50.41 | brlcad | we love the interaction, huge potential |
| 05:50.54 | brlcad | we were the org that has already granted commit status even |
| 05:51.36 | RONNCC | brlcad: oh holy snap there's 100 of us O_O |
| 05:51.52 | RONNCC | brlcad: really sorry then mate. i've only seen like 3 or 4 people when i'm here |
| 05:52.12 | brlcad | many don't find their way to IRC |
| 05:52.33 | brlcad | some require private discussions because they're working on production web infrastructure |
| 05:52.41 | brlcad | others just need .. help |
| 05:55.11 | RONNCC | ... don't understand your last sentence but ok. by the way who makes the deuces? they seem very self encapsulating |
| 05:56.58 | brlcad | our dev team did |
| 05:57.38 | brlcad | last sentence was just implying that some students require substantially more help than others |
| 05:59.30 | brlcad | some basically none at all, some we have to help find our website |
| 05:59.34 | brlcad | and everything in between |
| 06:00.05 | RONNCC | mhmm continuous distribution :D |
| 06:00.11 | RONNCC | would you say it's gaussian |
| 06:04.02 | brlcad | hard to say at this point, but probably |
| 06:11.22 | *** join/#brlcad Ashish101 (73b874cc@gateway/web/freenode/ip.115.184.116.204) |
| 06:12.48 | GrantMercer015 | task updated with a patch instead and ready to be reviewed(for real)! sorry about the confusion |
| 06:16.08 | Ashish101 | http://sourceforge.net/tracker/?group_id=105292&atid=640802&source=navbar-- Is there any other page where the bugs are reported apart from this one ?? |
| 06:20.06 | brlcad | Ashish101: also our BUGS file |
| 06:20.37 | Ashish101 | U mean this - http://brlcad.svn.sourceforge.net/viewvc/brlcad/brlcad/trunk/BUGS |
| 06:20.40 | Ashish101 | ? |
| 06:23.57 | Ashish101 | OK yes yes this is the one Any other (If any) |
| 06:26.49 | brlcad | no others that count |
| 06:35.22 | Ashish101 | thanks |
| 06:37.00 | mansi22 | lachlanp: yes, Visual Studio |
| 07:00.22 | *** join/#brlcad hsrai (~tcc@202.164.53.117) |
| 07:03.29 | brlcad | waves hello to hsrai |
| 07:04.56 | hsrai | Hello |
| 07:09.39 | brlcad | almost all caugh up with reviews, but I have to call it a night for now :) |
| 07:09.45 | brlcad | s/caugh/caught/ |
| 07:12.32 | Ashish101 | :) |
| 07:15.03 | *** join/#brlcad bhlegm (6cb41b13@gateway/web/freenode/ip.108.180.27.19) |
| 07:15.08 | brlcad | rather, all have been reviewed, but several need morew work |
| 07:16.17 | Ashish101 | Yup i had given mine just for chekup - is it right or wrong .. |
| 07:19.39 | bhlegm | brlcad you don't like pink? or how things are placed? in piwigo |
| 07:22.59 | brlcad | bhlegm: heh, don't worry about the style |
| 07:23.08 | bhlegm | im just wondering xP |
| 07:23.13 | brlcad | we'll fold that into our main website when the time comes and rebrand it :) |
| 07:23.20 | brlcad | but yes, both :) |
| 07:23.43 | brlcad | Ashish101: which task? |
| 07:24.04 | Ashish101 | http://www.google-melange.com/gci/task/view/google/gci2012/8021209 |
| 07:24.19 | lachlanp | i like the title of that one |
| 07:24.22 | brlcad | crash archer, right? |
| 07:24.44 | brlcad | ah, yeah |
| 07:24.48 | bhlegm | and ya there are other themes on how things are placed :P |
| 07:25.42 | Ashish101 | yes that one |
| 07:25.53 | lachlanp | hey Ashish101 - i'm getting that error all the time on my brlcad... its doing that for heaps of buttons |
| 07:26.07 | brlcad | Ashish101: so for starters, please no .doc or .docx or other microsoftness ;) |
| 07:26.16 | brlcad | Ashish101: text files work great ;) |
| 07:26.26 | Ashish101 | :) KK PDF ?? |
| 07:26.28 | brlcad | or rtf even |
| 07:26.34 | brlcad | editable is good |
| 07:26.37 | lachlanp | he's got images in it |
| 07:26.45 | lachlanp | screenshots |
| 07:26.47 | brlcad | yeah, so rtf |
| 07:26.58 | brlcad | or rtfd even |
| 07:27.14 | Ashish101 | KK I see Should i upload the test file again ?? |
| 07:27.23 | brlcad | no, for future reference |
| 07:28.06 | brlcad | Ashish101: so you certainly found a run-time error, but did that bring down archer? |
| 07:28.42 | brlcad | that's a tcl error, which sucks and is something to fix, but not exactly what the task prescribed ;) |
| 07:28.50 | Ashish101 | no That just didnt let me use that function |
| 07:29.21 | brlcad | try to crash it ;) |
| 07:29.29 | brlcad | should be easily doable with archer |
| 07:29.39 | Ashish101 | Oh OK So i have to do something to just kill Archer and not find internal bugs |
| 07:29.40 | brlcad | as it's not undergone much robustness testing |
| 07:29.44 | brlcad | right |
| 07:29.49 | Ashish101 | yes |
| 07:30.10 | *** join/#brlcad harmanpreet (~chatzilla@202.164.53.117) |
| 07:30.15 | *** join/#brlcad mansi22 (~Mansi@182.64.83.125) |
| 07:30.24 | brlcad | keep your page, though and remind me later to create a task that makes sure all menu options and all panel options in archer don't give a tcl error :) |
| 07:30.31 | brlcad | or to report all that do, etc |
| 07:31.10 | Ashish101 | KK |
| 07:31.15 | brlcad | time to hang the hat up |
| 07:31.20 | brlcad | cya all in a few |
| 07:31.23 | brlcad | goes walkabout |
| 07:31.26 | lachlanp | whats your local time? |
| 07:31.37 | brlcad | 2:30am |
| 07:31.42 | lachlanp | ah :-) |
| 07:32.07 | Ashish101 | God u r late ... |
| 07:32.13 | Ashish101 | Its just 1 PM here |
| 07:32.25 | lachlanp | 6PM here |
| 07:32.27 | lachlanp | ;-) |
| 07:33.13 | brlcad | Ashish101: couple of the other mentors are near you, so you're in great hands |
| 07:33.25 | Ashish101 | thanks :) |
| 07:36.20 | bhlegm | its 11:30 pm here |
| 07:39.59 | *** join/#brlcad d_rossberg (~rossberg@BZ.BZFLAG.BZ) |
| 07:58.59 | *** join/#brlcad hsrai (~tcc@202.164.53.117) |
| 08:04.47 | *** join/#brlcad harmanpreet (~chatzilla@202.164.53.117) |
| 08:09.24 | *** join/#brlcad hsrai (~quassel@202.164.53.117) |
| 08:13.02 | *** join/#brlcad hsrai (~quassel@202.164.53.117) |
| 08:16.52 | *** join/#brlcad hsrai_ (~quassel@202.164.53.117) |
| 08:25.38 | *** join/#brlcad mansi22 (~Mansi@182.64.83.125) |
| 08:27.13 | *** join/#brlcad hsrai (~quassel@202.164.53.117) |
| 08:34.26 | mansi22 | AUTO BUNDULED SYSTEM, which one should i use in CMake |
| 08:36.31 | d_rossberg | mansi22: the default one which you have when you don't touch the parameter (usually the AUTO one) |
| 08:37.34 | mansi22 | alright, but when the project file is made. VS crashes :-/ |
| 08:37.42 | mansi22 | i have no idea why |
| 08:40.50 | *** join/#brlcad xavortm (xavortm@93.155.146.15) |
| 08:54.58 | mansi22 | visual studio crashes as i run the BRLCAD project file. need help. |
| 08:56.50 | d_rossberg | mansi22: does it crash or hangs it? |
| 08:57.09 | mansi22 | hangs |
| 08:58.27 | d_rossberg | visual studio needs a lot of time to load all BRL-CAD projects, therefore be patient |
| 08:59.25 | mansi22 | as soon as i minimize it i can't see the window |
| 09:01.01 | d_rossberg | ??? isn't this the expexted behavior? |
| 09:01.56 | mansi22 | :P if i try to maximze, it doesn't shows up. anyways i'll wait for a while. |
| 09:03.43 | mansi22 | ahh, used administrator mode. it's working ;) |
| 09:04.26 | mansi22 | now compliing.... |
| 09:35.51 | lachlanp | hi |
| 09:35.55 | lachlanp | where does the bu_log output go? |
| 09:36.21 | lachlanp | or shouldn't i test the bu_avs_print (which dumps the attribute/value set to the bu_log) |
| 09:36.57 | *** join/#brlcad archivist (~archivist@host81-149-189-98.in-addr.btopenworld.com) |
| 09:37.14 | lachlanp | and should i test the bu_avs_add_vls (which adds a Variable Length String) |
| 09:43.00 | d_rossberg | the bu_log output goes to a hook-function (you can define your own), usually the console |
| 09:43.08 | lachlanp | ok |
| 09:43.44 | d_rossberg | and yes, please test all bu_avs_~ functions |
| 09:43.57 | lachlanp | testing if it prints properly would be a bit of work... (defintely doable though) |
| 09:44.02 | lachlanp | just a pain |
| 09:44.18 | lachlanp | yes will test bu_avs_add_vls |
| 09:45.05 | lachlanp | sorry was that a "yes test it" for bu_avs_print? |
| 09:45.50 | d_rossberg | you could define your own hook-funktion which writes the output to the memory |
| 09:46.08 | lachlanp | ok |
| 09:46.23 | d_rossberg | and then compare this memory content with the expected resule |
| 09:46.37 | d_rossberg | result |
| 09:47.24 | lachlanp | ok willdo |
| 09:57.47 | lachlanp | whats the point of the bu_avs_add_unique function? |
| 09:57.55 | lachlanp | where will you ever know it has a duplicate? |
| 09:58.00 | mansi22 | Project : error PRJ0019: A tool returned an error code from "Validating DocBook source with xmllint:" |
| 09:59.30 | lachlanp | afaik it will only show up when you print it out |
| 09:59.48 | lachlanp | or if you use the remove function |
| 10:17.48 | d_rossberg | mansi22: problems with building the documentation aren't unusual under visual studio |
| 10:30.03 | *** join/#brlcad hsrai (~quassel@202.164.53.117) |
| 10:34.16 | *** join/#brlcad harmanpreet (~chatzilla@202.164.53.117) |
| 10:42.36 | *** join/#brlcad mansi22 (~Mansi@182.64.83.125) |
| 10:42.46 | mansi22 | THANKS :) |
| 11:11.18 | *** join/#brlcad mansi22 (~Mansi@182.64.83.125) |
| 11:13.34 | *** join/#brlcad Skriptkid (~Skriptkid@117.202.105.206) |
| 11:15.05 | *** join/#brlcad harmanpreet (~chatzilla@202.164.53.117) |
| 11:27.32 | *** join/#brlcad Skriptkid (~Skriptkid@117.202.105.206) |
| 11:45.34 | Skriptkid | d_rossberg: What do I do about the One-sheet Hyperboloid Surface Area equation? |
| 11:48.32 | d_rossberg | the point is: i don't know if the formula is ok, but maybe another mentor knows |
| 11:49.01 | Skriptkid | Do I wait now? |
| 11:49.36 | d_rossberg | however, you should know if your equation contains the area of the elliptical surfaces at the top and bottom of the solid |
| 11:50.33 | Skriptkid | erik said that except some changes in code everything else wa fine |
| 11:50.39 | Skriptkid | *was |
| 11:51.22 | Skriptkid | but hang on. this is a hyperboloid. Not elliptical |
| 11:53.40 | d_rossberg | i meant the 2 end-surfaces |
| 11:55.10 | d_rossberg | the solid is buils from 3 surfaces: one hyperboloid and two elliptical |
| 11:55.58 | Skriptkid | I dont know about that. Do I have to write another function for the elliptical surfaces also? |
| 11:56.15 | Skriptkid | I guess it's already there in ell.c |
| 11:58.24 | d_rossberg | you have to write a surface function for the hyp solid, and the surface of this solid can be stripped down to 3 parts ... |
| 12:00.06 | d_rossberg | giving only the hyperbolic part would be not enough |
| 12:01.17 | *** join/#brlcad Al_Da_Best (Al_Da_Best@cpc2-shep12-2-0-cust21.8-3.cable.virginmedia.com) |
| 12:01.46 | Skriptkid | So what do I need to do now? |
| 12:02.15 | Skriptkid | Call the ell_surface_area and multiply it by two and add it to this? |
| 12:05.18 | d_rossberg | first, you should add a reference for the formala to the source code (if possible), it looks like it's not trivial |
| 12:05.56 | Skriptkid | it's there in the comments. I got it from WolframAlpha. Hang on. I'll send it here |
| 12:05.59 | d_rossberg | for the elliptical surfaces: are they always identical? |
| 12:06.11 | Skriptkid | http://mathworld.wolfram.com/Hyperboloid.html |
| 12:08.10 | Skriptkid | I don't know. But I guess even the elliptical surfaces are included, as the formula is for the SA of the whole hyperboloid |
| 12:09.20 | d_rossberg | hyperboloid is a surface, not a solid - but hyp is a solid, i.e. you need the closing surfaces in addition |
| 12:12.10 | Skriptkid | I know that. Take a look at this: http://www.wolframalpha.com/input/?i=one-sheeted+hyperboloid. Have I got the right thing? |
| 12:14.56 | Skriptkid | http://en.wikipedia.org/wiki/Hyperboloid |
| 12:14.57 | Skriptkid | So |
| 12:15.03 | Skriptkid | the top and bottom are not closed |
| 12:15.13 | d_rossberg | you see |
| 12:15.22 | Skriptkid | you mean to say that they need to be closed? |
| 12:15.34 | Skriptkid | Now hollow as in the wikipedia page |
| 12:15.35 | d_rossberg | close them and you have the hyp solid |
| 12:15.36 | Skriptkid | ? |
| 12:15.37 | Skriptkid | *not |
| 12:15.41 | Skriptkid | Ok |
| 12:15.53 | Skriptkid | So the top and bottom surfaces are ellipses |
| 12:15.54 | Skriptkid | ? |
| 12:16.43 | Skriptkid | the closing surfaces, I mean |
| 12:17.20 | d_rossberg | i'm not entirely sure, but as everything is quadratic these should be quadratic surfaces (in the plan), therefore elliptical |
| 12:19.00 | Skriptkid | Ok. So, now, shall I port the rt_ell_surface_area to this function, so that I get the area of closing surfaces also? I have the SA of the hyperboloid, I now get the SA of the top and bottom elliptical closing surfaces and I'll just add them. I have the SA of the hyp solid |
| 12:21.04 | d_rossberg | i'm afraid that rt_ell_surface_area() won't help much as this computes the area of a 3D ellipsoid solid |
| 12:21.21 | d_rossberg | this is different from a plane ellipsis |
| 12:23.19 | *** join/#brlcad xavortm (xavortm@93.155.146.15) |
| 12:23.23 | Skriptkid | All the task says is I need to compute Surface area of a one-sheeted hyperboloid. The description and references and my research didn't point to the closing surfaces at all. So could I please get an extension if there's more work? |
| 12:24.01 | Skriptkid | That wasn't pointed out by any mentor either before. |
| 12:27.32 | d_rossberg | i'm quite sure that the area function should return the area of the whole solid not only a part of it, but you may ask anothe mentor as well |
| 12:28.14 | Skriptkid | Alright. I'll do the whole solid. Could you tell me what the closing surfaces are again? |
| 12:28.23 | Skriptkid | ellipsoids? |
| 12:29.59 | Skriptkid | d_rossberg: or just plane circles, as I'm see in some images. |
| 12:30.05 | d_rossberg | http://en.wikipedia.org/wiki/Ellipse |
| 12:30.46 | d_rossberg | just plane circles: maybe |
| 12:31.50 | Skriptkid | d_rossberg: What do I calculate the area for. Circles or Ellipses? |
| 12:32.04 | Skriptkid | Or 2 seperate funcs for both? |
| 12:33.14 | Skriptkid | If it's circle, major axis = minor axis, else, ellipse, right? |
| 12:33.39 | d_rossberg | right |
| 12:33.51 | Skriptkid | okay. Thats it? or anymore work needed? |
| 12:45.42 | d_rossberg | maybe we should ask another mentor: in the data of the hyp (rt_hyp_internal) are a semi-major and -minor axis: does this mean the hyperboloid isn't rotation-symmetrical? |
| 12:49.59 | d_rossberg | http://mathworld.wolfram.com/EllipticHyperboloid.html |
| 12:51.44 | brlcad | Skriptkid: yep, the whole solid (I would have thought the trimming surfaces are implied, otherwise it's just infinity no?) |
| 12:53.20 | Skriptkid | brlcad: So is my formula for the hyperboloid surface wrong? |
| 12:54.36 | *** join/#brlcad caen23 (~caen23@92.81.204.43) |
| 12:56.37 | *** join/#brlcad andrei (~andrei@188.25.158.113) |
| 12:56.43 | Skriptkid | @d_rossberg: Do I need to find a different one? |
| 13:03.30 | d_rossberg | i'm afraid yes, we don't have a "Hyperboloid" but an "EllipticHyperboloid" here. and by the way: ip->idb_ptr isn't hyp_specific but rt_hyp_internal |
| 13:06.01 | Skriptkid | crap. ok. need some help. I found this: http://www.wolframalpha.com/input/?i=elliptic+hyperboloid. But I don't understand what 'u' and the 'v' are, which are being differentiated |
| 13:08.45 | xavortm | hey, brlcad, i uploaded some work on the page, can you check and say me if its ok and if not, what i should work on? |
| 13:11.05 | *** join/#brlcad M0J0E (~johannes@p4FDFB3D7.dip.t-dialin.net) |
| 13:14.28 | d_rossberg | Skriptkid: these are the parametrization a the surface: u is a length and v an angle |
| 13:16.03 | Skriptkid | The angle isn't there in rt_hyp_internal or hyp_specififc. How do I get it? |
| 13:16.22 | Skriptkid | I'm unable to find any other formula for SA of ellipticla hyperboloids |
| 13:17.38 | Skriptkid | tan inverse of c(Slope of asymptote cone)? |
| 13:18.38 | *** join/#brlcad Silvrous (4f706699@gateway/web/freenode/ip.79.112.102.153) |
| 13:18.48 | Skriptkid | or sine inverse of (z/c). That gives v according to 'z = c sinh v' |
| 13:19.55 | Silvrous | There's been a change to the wiki front page, changing the content to "how to stop coughing" |
| 13:20.12 | d_rossberg | there is no closed formula for the area, only for dA which needs to be integrated (where v goes from 0 to 2pi) |
| 13:20.15 | Silvrous | I assumed it was vandalism, and reverted it |
| 13:21.20 | Skriptkid | d_rossberg: Didnt understand that |
| 13:21.33 | d_rossberg | Skriptkid: at the moment the math doesn't look trivial to me |
| 13:22.42 | d_rossberg | dA(u, v) gives the change of the area in the point (u, v), i.e. A = integral dA |
| 13:23.29 | Skriptkid | Oh. But I'm unable to find any surface area formulae for elliptic hyperboloids other than that. |
| 13:29.19 | d_rossberg | all i can say is: it would cost me some days to undestand the formulas and develop a solution ;) |
| 13:30.32 | Skriptkid | d_rossberg: LOL :) There are descriptions everywhere on the web but nowhere the formula. |
| 13:31.12 | Skriptkid | d_rossberg: Guess I'll unlcaim this and move on to some other task. Wasted 4 days on this. |
| 13:32.26 | d_rossberg | Skriptkid: i support this decision :-} |
| 13:33.57 | andrei | Silvrous: nice :) thanks |
| 13:34.18 | Skriptkid | d_rossberg: So finally, when you said "I don't think the math is trivial at the moment," did you mean you didn't know it would be this hard when the task was set? Or is it just that I couldn't ind anything? |
| 13:34.26 | Skriptkid | *find |
| 13:35.44 | d_rossberg | we didn't know it would be this hard |
| 13:36.47 | Skriptkid | d_rossberg: Oh, okay. It's just that I don't wanna feel like a douche ;) Thanks for all your help. :) Continuous Integration, here I come! |
| 13:36.59 | andrei | Skriptkid, have you spoke with Matt, as far as I know he is more keen on math |
| 13:37.02 | andrei | ? |
| 13:37.09 | Skriptkid | Nope |
| 13:37.45 | andrei | Skriptkid: he might be able to help with mathematical issues (regardless of task, I believe) |
| 13:38.32 | Skriptkid | andrei: I'll do that. But I'll move on now to another task and come back to this(or a similar SA/Vol/Centroid task) later. |
| 13:38.39 | Skriptkid | andrei: thanks, anyway :) |
| 13:38.46 | andrei | sure, you're welcome:) |
| 13:39.46 | Skriptkid | one little help. Could you please assign the CI task to me? Ive claimed it now |
| 13:40.14 | andrei | yes, will do that now :) |
| 13:40.25 | Skriptkid | thank you, andrei :D |
| 13:40.48 | Silvrous | Well, I just claimrequested a similar task earlier. Guess I'd better read up on my integrals :P |
| 13:42.06 | andrei | hm, I was waiting on notify but it seems there were several claimrequests undealt with |
| 13:44.47 | *** join/#brlcad Skriptkid (~Skriptkid@117.202.105.206) |
| 13:45.28 | Skriptkid | d_rossberg: but then, do I get any credit for my effort? ;) |
| 13:46.11 | *** join/#brlcad Skriptkid1 (~Skriptkid@117.202.105.206) |
| 13:57.30 | *** join/#brlcad mansi22 (~Mansi@182.64.83.125) |
| 14:04.59 | brlcad | Silvrous: thank you :) |
| 14:06.04 | brlcad | Skriptkid_: since you're getting into "real" development issues, you may want to join the brlcad-devel mailing list where some of the other devs reside |
| 14:06.40 | brlcad | you can share progress and ask questions that are more technically involved there, and reach a couple devs that are rarely on IRC |
| 14:06.59 | brlcad | as for whether your equation is right or wrong, I haven't looked at it |
| 14:14.30 | Skriptkid | Brlcad: will do. I'm not on the SA task anymore. I'm doing CI now |
| 14:15.01 | brlcad | starseeker: looks like windows now chokes on "Validating DocBook source with xmllint:" |
| 14:16.15 | caen23 | brlcad: can you show me an error? |
| 14:16.23 | brlcad | Skriptkid: okay, just in general -- you're proving capable of asking good questions, just want you to be aware that there are more resources available to you than IRC ;) |
| 14:16.45 | brlcad | caen23: for what? the windows failure? |
| 14:16.51 | caen23 | brlcad: yes |
| 14:17.05 | Skriptkid | brlcad : Wow. Thanks for that :D |
| 14:17.13 | brlcad | a student just reported that a few hours ago |
| 14:17.21 | caen23 | did he include logs or anything? |
| 14:17.25 | brlcad | nope |
| 14:17.41 | brlcad | it makes sense, it's probably just set up to try and run xmllint, which isn't installed |
| 14:17.49 | caen23 | is it possible his setup is broken? |
| 14:17.59 | brlcad | needs to test for the tool any only try to run it if available |
| 14:18.28 | brlcad | more than likely, our build files are just not set up properly for a platform without xmllint |
| 14:18.50 | caen23 | oh, ok then |
| 14:21.03 | caen23 | and regarding my current task ("close mged when both windows are closed"), i think this might be a feature, not a bug? i think it was purposely written so that everything is deleted when the graphics window is closed, so fixing it would require quite a lot of work |
| 14:21.29 | *** join/#brlcad hsrai (~quassel@202.164.53.117) |
| 14:24.13 | brlcad | caen23: so yes it was purposely written that way, but then the "bug" is that the two windows are inconsistent. closing the command console does not delete anything. |
| 14:24.39 | brlcad | the task could be to make them consistent first, so closing either shuts down mged |
| 14:25.08 | brlcad | there are good use cases for allowing either to remain open, though, so the ultimate goal is as it describes |
| 14:25.35 | brlcad | if you have a sense for what all the work required is, perhaps you can document what that work is and we can see if it can be described in terms of a series of tasks |
| 14:25.49 | brlcad | or at least be documented for when someone has time to do it |
| 14:26.59 | caen23 | i believe that currently, the command window is a child of the graphics window, but i'm not entirely sure. also, i've noticed that closing the cmw window does delete the menu bar, perhaps so that you can't use the menu inside the graphical window to open the command window |
| 14:27.56 | *** join/#brlcad Skriptkid (~Skriptkid@117.202.105.206) |
| 14:28.25 | *** join/#brlcad Skriptkid (~Skriptkid@117.202.105.206) |
| 14:39.31 | Notify | 03BRL-CAD:brlcad * 53971 brlcad/trunk/AUTHORS: credit phillips lachlan with his work contributing a libbn unit test |
| 14:39.33 | Notify | 03BRL-CAD:brlcad * 53972 brlcad/trunk/NEWS: repost to fix comment, bob parker added preliminary support for interactive editing of sketch objects in archer |
| 14:39.57 | Notify | 03BRL-CAD:brlcad * 53973 (brlcad/trunk/AUTHORS brlcad/trunk/include/raytrace.h and 4 others): apply the arb8 centroid patch from GCI student Ashwin Lokkur (http://www.google-melange.com/gci/task/view/google/gci2012/7959221), untested. |
| 14:40.02 | *** join/#brlcad harmanpreet (~chatzilla@124.253.20.22) |
| 14:40.36 | Notify | 03BRL-CAD:jordisayol * 53974 (brlcad/trunk/misc/debian/archer.desktop brlcad/trunk/misc/debian/mged.desktop brlcad/trunk/misc/debian/rtwizard.desktop): Set mged as kde default |
| 14:40.39 | Notify | 03BRL-CAD:jordisayol * 53975 (brlcad/trunk/misc/debian/brlcad.postinst brlcad/trunk/misc/debian/brlcad.postrm brlcad/trunk/sh/make_rpm.sh): Improve Linux install/remove scripts to set mged as Gnome default app. |
| 14:40.48 | Notify | 03BRL-CAD:bob1961 * 53976 brlcad/trunk/src/tclscripts/lib/Ged.tcl: Update cadwidgets::Ged::end_data_poly_move to call the clip routine regardless of the presence of overlaps. This lets the clip routine identify holes. |
| 14:40.53 | Notify | 03BRL-CAD Wiki:Hstop Coughing * 4726 /wiki/Main_page: How To Stop Coughing |
| 14:40.55 | Notify | 03BRL-CAD Wiki:62.28.72.245 * 4727 /wiki/Community_Publication_Portal: /* Final Editorial Review */ |
| 14:40.57 | Notify | 03BRL-CAD Wiki:Silvrous * 4728 /wiki/Main_page: Undo revision 4726 by [[Special:Contributions/Hstop Coughing|Hstop Coughing]] ([[User talk:Hstop Coughing|Talk]]) rv vandalism |
| 14:40.59 | Notify | 03BRL-CAD Wiki:Sean * 0 /wiki/Special:Log/block: blocked [[User:Hstop Coughing]] with an expiry time of infinite (account creation disabled, e-mail blocked): Spamming links to external sites |
| 14:41.00 | Notify | 03GCI: Titi: Compile and run BRL-CAD on a Raspberry Pi - Task Claimed I would like to work on this task. http://www.google-melange.com/gci/task/view/google/gci2012/8003218 |
| 14:41.01 | Notify | 03GCI: An: Find and fix at least 5 spelling mistakes in at least 40 different files - Something is wrong with your git repo Hi, I figured out that something is wrong with your git repo, because when cloning, it should say "remote: counting objects: xxxxx, done ... etc" but for me, it doesn't because it's just stuck at "Cloning into 'brlcad'",... http://www.google-melange.com/gci/task/view/google/gci2012/7999212 |
| 14:41.02 | Notify | 03GCI: Gmercer015: Design an MGED command spreadsheet - Spreadsheet extension Does the spreadsheet need to have a specific extension? I would hope to be able to use OpenOffice spreadsheets as opposed to microsofts spreadsheets http://www.google-melange.com/gci/task/view/google/gci2012/7985228 |
| 14:41.03 | Notify | 03GCI: Shomiron Ghose: Find and fix at least 5 spelling mistakes in at least 40 different files - No from my understanding BRL uses apache svn ... not git... look at their build from source repo on their website. http://www.google-melange.com/gci/task/view/google/gci2012/7999212 |
| 14:41.04 | Notify | 03GCI: An: Find and fix at least 5 spelling mistakes in at least 40 different files - Shomiron Ghose Yes, but Sean just said that they already had a git repository running, check his last comment. Anyways, I'm currently cloning using "svn co https://brlcad.svn.sourceforge.net/svnroot/brlcad/brlcad/trunk" So it's fine now. http://www.google-melange.com/gci/task/view/google/gci2012/7999212 |
| 14:41.05 | Notify | 03GCI: Monika: Find and fix at least 10 spelling mistakes in at least 10 different files - Thanks Thanks so much! Unfortunately I haven't been able to find enough misspellings http://www.google-melange.com/gci/task/view/google/gci2012/7959223 |
| 14:41.06 | Notify | 03GCI: Monika: Find and fix at least 10 spelling mistakes in at least 10 different files - Claim Removed The claim on this task has been removed, someone else can claim it now. http://www.google-melange.com/gci/task/view/google/gci2012/7959223 |
| 14:41.07 | Notify | 03GCI: Melange: Convert Gallery to Piwigo - No more Work can be submitted Melange has detected that the deadline has passed and no more work can be submitted. The submitted work should be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/7991207 |
| 14:41.08 | Notify | 03GCI: BrendenD15: Compile BRL-CAD on Windows using Cygwin - I might be on to something It looks like I will have to determine a way to satisfy each variable that CMake is unable to automatically create. However, it is possible that it is infact my OS's fault CMake is having these difficulties. I have noticed that other programs not designed... http://www.google-melange.com/gci/task/view/google/gci2012/7972239 |
| 14:41.09 | Notify | 03GCI: Lachlan P: Create a utility library (LIBBU) API unit test ... for avs.c - Task Claimed I would like to work on this task. http://www.google-melange.com/gci/task/view/google/gci2012/7986218 |
| 14:41.10 | Notify | 03GCI: Lachlan P: Create a utility library (LIBBU) API unit test ... for avs.c - CMakeLists.txt Hi, Is it necessary for me to write tests that are parameterised? By that I mean that you supply data using the CMakeLists.txt. For this test (testing the attribute/value set) I don't think it will be very easy... (Looking at some of the existing... http://www.google-melange.com/gci/task/view/google/gci2012/7986218 |
| 14:41.11 | Notify | 03GCI: reikaze: Fix closedb - Where are the commands processed? In particular I've been looking for "opendb" and "closedb". I looked at tcl.h, several tcl.c's, and cmd.c without success... http://www.google-melange.com/gci/task/view/google/gci2012/7958214 |
| 14:41.12 | Notify | 03GCI: Melange: Compile BRL-CAD on Windows using Cygwin - No more Work can be submitted Melange has detected that the deadline has passed and no more work can be submitted. The submitted work should be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/7972239 |
| 14:41.13 | Notify | 03GCI: fernozzle: Implement a primitive centroid function ... for extruded bitmaps (EBM) - Centroid examples Here are some examples of the exact same centroid procedure in action (amazing balancing acts!): http://cl.ly/image/0e2j1d0A2l2q "If a physical object has uniform density, then its center of mass is the same as the centroid of its... http://www.google-melange.com/gci/task/view/google/gci2012/7998216 |
| 14:41.14 | Notify | 03GCI: BrendenD15: Compile BRL-CAD on Windows using Cygwin - Good News and Bad News I'll start with the bad news first. It really isn't bad, just inconvenient. The Compatibility Settings didn't solve anything. Which means that I still have to determine the missing variables. Good news is though, once the CMAKE_MAKE_PROGRAM and... http://www.google-melange.com/gci/task/view/google/gci2012/7972239 |
| 14:41.15 | Notify | 03GCI: Skriptkid: Add a primitive surface area function ... for hyperboloids of one sheet (HYP) - Src If patch16.patch doesn't work at all, could you please use the source files in table+hyp.tar.gz. they're updated to the latest revs and they compile(tested). I've fixed the bugs. So, they're bound to work. http://www.google-melange.com/gci/task/view/google/gci2012/7983225 |
| 14:41.16 | Notify | 03GCI: reikaze: Fix closedb - Ready for review The work on this task is ready to be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/7958214 |
| 14:41.17 | Notify | 03GCI: reikaze: Fix closedb - Use the second patch! The first one has bad paths... http://www.google-melange.com/gci/task/view/google/gci2012/7958214 |
| 14:41.18 | Notify | 03GCI: Willie Zhu: Implement a primitive volume function ... for hyperboloids of one sheet (HYP) - Ready for review The work on this task is ready to be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/8009213 |
| 14:41.19 | Notify | 03GCI: Melange: Implement a primitive centroid function ... for extruded bitmaps (EBM) - No more Work can be submitted Melange has detected that the deadline has passed and no more work can be submitted. The submitted work should be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/7998216 |
| 14:41.20 | Notify | 03GCI: Ashish: Crash Archer reliably - Task Claimed I would like to work on this task. http://www.google-melange.com/gci/task/view/google/gci2012/8021209 |
| 14:41.21 | Notify | 03GCI: Sean: Create a utility library (LIBBU) API unit test ... for avs.c - Task Assigned This task has been assigned to Lachlan P. You have 48 hours to complete this task, good luck! http://www.google-melange.com/gci/task/view/google/gci2012/7986218 |
| 14:41.22 | Notify | 03GCI: Chris Kloehn: Crash MGED reliably - Question Is this the proper link to the download I need to compete this task? http://sourceforge.net/projects/brlcad/files/latest/download?source=files http://www.google-melange.com/gci/task/view/google/gci2012/7948218 |
| 14:41.23 | Notify | 03GCI: Sean: Create a utility library (LIBBU) API unit test ... for avs.c - depends on the unit Hi Lachlan, it depends on what you're testing but in general no. It doesn't have to be parameterized but strictly speaking, it'd still be parameterized just with zero parameters. ;) http://www.google-melange.com/gci/task/view/google/gci2012/7986218 |
| 14:41.24 | Notify | 03GCI: Matt S.: Implement a primitive volume function ... for hyperboloids of one sheet (HYP) - I don't think this will work... Aside from the fact that the code is not formatted correctly, I think what you have attempted to do is implement the formula given here: http://mathworld.wolfram.com/Hyperboloid.html correct? If so, this will not... http://www.google-melange.com/gci/task/view/google/gci2012/8009213 |
| 14:41.25 | Notify | 03GCI: Matt S.: Implement a primitive volume function ... for hyperboloids of one sheet (HYP) - Task Needs More Work One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the requirements needed to complete this task, submit your work again and mark the task as complete once you... http://www.google-melange.com/gci/task/view/google/gci2012/8009213 |
| 14:41.26 | Notify | 03GCI: Matt S.: Implement a primitive volume function ... for hyperboloids of one sheet (HYP) - Deadline extended The deadline of the task has been extended with 1 days and 0 hours. http://www.google-melange.com/gci/task/view/google/gci2012/8009213 |
| 14:41.27 | Notify | 03GCI: Sean: Crash MGED reliably - hat works For this task, that link will certainly work since it was the last binary release. Since you're on Mac OS X, if you can get MGED to crash, a detailed log should be created for your automatically. Be sure to include that along with steps that reliably reproduce the crash. http://www.google-melange.com/gci/task/view/google/gci2012/7948218 |
| 14:41.28 | Notify | 03GCI: javamonn: Model a "B" using BRL-CAD - Ready for review The work on this task is ready to be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/7949231 |
| 14:41.29 | Notify | 03GCI: javamonn: Model a "B" using BRL-CAD - Worked out one problem... So I fixed the problem of it being multiple regions. I can't figure out how to export it as an ascii database though. Where do I run that command? I cant seem to export it as an ascii database either, every time I try to save it somewhere it doesn't show up. The spec says... http://www.google-melange.com/gci/task/view/google/gci2012/7949231 |
| 14:41.30 | Notify | 03GCI: Chris Kloehn: Crash MGED reliably - Thanks Thank you, Ill get right on the quality assurance, but what would you like me to do in the case that your program doesnt crash? http://www.google-melange.com/gci/task/view/google/gci2012/7948218 |
| 14:41.31 | Notify | 03GCI: Sean: Crash MGED reliably - hen you didn't try hard enough We're not foolish enough to think that our software won't crash. You might have to hunt for a couple hours, but finding a crash should be possible. I get it to crash regularly just through normal use, without even trying. That said, this task is like our spelling mistake... http://www.google-melange.com/gci/task/view/google/gci2012/7948218 |
| 14:41.32 | Notify | 03GCI: Sean: Crash Archer reliably - Task Assigned This task has been assigned to Ashish. You have 48 hours to complete this task, good luck! http://www.google-melange.com/gci/task/view/google/gci2012/8021209 |
| 14:41.33 | Notify | 03GCI: Sean: Compile and run BRL-CAD on a Raspberry Pi - Task Assigned This task has been assigned to Titi. You have 48 hours to complete this task, good luck! http://www.google-melange.com/gci/task/view/google/gci2012/8003218 |
| 14:41.34 | Notify | 03GCI: Sean: Compile and run BRL-CAD on a Raspberry Pi - IRC Please join me on IRC for login credentials or e-mail me via morrison -> brlcad.org http://www.google-melange.com/gci/task/view/google/gci2012/8003218 |
| 14:41.35 | Notify | 03GCI: Sean: Make mged 'tables' command not call system() - Task Needs More Work One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the requirements needed to complete this task, submit your work again and mark the task as complete once you re-submit your work. http://www.google-melange.com/gci/task/view/google/gci2012/8007219 |
| 14:41.36 | Notify | 03GCI: Sean: Make mged 'tables' command not call system() - not in patch format So from our discussions and what you wrote in your changelog notes, this looks like it's probably good but it's not feasible to review it as-is. Changes need to be submitted in patch format, otherwise they take far too long to review. See these for help on making... http://www.google-melange.com/gci/task/view/google/gci2012/8007219 |
| 14:41.37 | Notify | 03GCI: Sean: Make mged 'tables' command not call system() - Deadline extended The deadline of the task has been extended with 1 days and 0 hours. http://www.google-melange.com/gci/task/view/google/gci2012/8007219 |
| 14:41.38 | Notify | 03GCI: Sean: Make mged 'tables' command not call system() - fyi The follow-up task to fix the cat system() call is here, assuming someone doesn't claim it before you can fix up this patch: http://www.google-melange.com/gci/task/view/google/gci2012/7966235 http://www.google-melange.com/gci/task/view/google/gci2012/8007219 |
| 14:41.39 | Notify | 03GCI: Sean: Write BRL-CAD News article on .deb/.rpm builds - Task Needs More Work One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the requirements needed to complete this task, submit your work again and mark the task as complete once you re-submit your work. http://www.google-melange.com/gci/task/view/google/gci2012/7945213 |
| 14:41.40 | Notify | 03GCI: Ambar Pal: Compile BRL-CAD using GCC 4.8 - Task Claimed I would like to work on this task. http://www.google-melange.com/gci/task/view/google/gci2012/7982223 |
| 14:41.41 | Notify | 03GCI: Sean: Write BRL-CAD News article on .deb/.rpm builds - nicely done John, That looks fantastic, almost perfect. Just a couple minor requests and this should be good to go: remove the reference to the CPP, just refer to the interview informally or quote Gala directly. the cpp is like going backstage, you don't talk about it. include a... http://www.google-melange.com/gci/task/view/google/gci2012/7945213 |
| 14:41.42 | Notify | 03GCI: Sean: Create an artistic screenshot - Task Needs More Work One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the requirements needed to complete this task, submit your work again and mark the task as complete once you re-submit your work. http://www.google-melange.com/gci/task/view/google/gci2012/8025213 |
| 14:41.43 | Notify | 03GCI: Sean: Create an artistic screenshot - not artistic So that's certainly a screenshot, but I think it fails the artistic criteria. That blob is not graphically interesting and it's not "pretty" or visually impressive to say the least. I suggest converting some impressive 3rd-party geometry (using our stl-g importer, for example) and... http://www.google-melange.com/gci/task/view/google/gci2012/8025213 |
| 14:41.44 | Notify | 03GCI: Melange: Create a technical screenshot - Initial Deadline passed Melange has detected that the initial deadline has passed and it has set the task status to ActionNeeded. The student has 24 hours to submit the work before the task is reopened and sent back to the pool for other students to claim. http://www.google-melange.com/gci/task/view/google/gci2012/8022221 |
| 14:41.45 | Notify | 03GCI: Sean: Fix closedb - on the right track So I think you're on the right track and have pinpointed the cause of the command elimination, but your change injects a bug at the same time it fixes the other. The gedp needs to be closed out because it's still referring to the previously open database. Perhaps the issue is just the setting of... http://www.google-melange.com/gci/task/view/google/gci2012/7958214 |
| 14:41.46 | Notify | 03GCI: Sean: Fix closedb - Task Needs More Work One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the requirements needed to complete this task, submit your work again and mark the task as complete once you re-submit your work. http://www.google-melange.com/gci/task/view/google/gci2012/7958214 |
| 14:41.47 | Notify | 03GCI: Sean: Create geometry database with one of every primitive - Task Closed Congratulations, this task has been completed successfully. http://www.google-melange.com/gci/task/view/google/gci2012/7985226 |
| 14:41.48 | Notify | 03GCI: Gmercer015: Make mged 'tables' command not call system() - Ready for review The work on this task is ready to be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/8007219 |
| 14:41.49 | Notify | 03GCI: Sean: Create geometry database with one of every primitive - good enough Donny, there are a few more issues, but you've definitely put great effort pulling this .g file together. I went ahead and approved it because of that effort, but I'm hoping you can send me your other files. Some of your .g file objects reference other files that... http://www.google-melange.com/gci/task/view/google/gci2012/7985226 |
| 14:41.50 | Notify | 03GCI: Sean: Set up StatSVN - looks good There are definitely some options I'd want to include, like ignoring all of our src/other hierarchy (our 3rd party sources skew the results in a major way), but you've certainly shown what is possible. How long did it take to process the entire history? http://www.google-melange.com/gci/task/view/google/gci2012/8013211 |
| 14:41.51 | Notify | 03GCI: Sean: Set up StatSVN - Task Closed Congratulations, this task has been completed successfully. http://www.google-melange.com/gci/task/view/google/gci2012/8013211 |
| 14:41.52 | Notify | 03GCI: Sean: Convert Gallery to Piwigo - ouch That theme is terrible. I presume piwigo provides options for customizing the look and feel and maybe even the layout? What's your impression of the administrative interface? Thanks for your efforts, that's a great proof of concept. http://www.google-melange.com/gci/task/view/google/gci2012/7991207 |
| 14:41.53 | Notify | 03GCI: Sean: Convert Gallery to Piwigo - Task Closed Congratulations, this task has been completed successfully. http://www.google-melange.com/gci/task/view/google/gci2012/7991207 |
| 14:41.54 | Notify | 03GCI: Will Bensky: Add missing documentation (for any ONE command) - Ready for review The work on this task is ready to be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/7972228 |
| 14:41.56 | Notify | 03GCI: Sean: Implement a primitive centroid function ... for extruded bitmaps (EBM) - Task Closed Congratulations, this task has been completed successfully. http://www.google-melange.com/gci/task/view/google/gci2012/7998216 |
| 14:41.56 | Notify | 03GCI: Sean: Implement a primitive centroid function ... for extruded bitmaps (EBM) - likely follow-on We'll likely have a follow-on task to confirm that your implementation works (maybe a unit test), but it looks reasonable at a glance. For reference, it really helps us if you create a patch file that includes all changes together (not... http://www.google-melange.com/gci/task/view/google/gci2012/7998216 |
| 14:41.57 | Notify | 03GCI: Sean: Implement a primitive centroid function ... for polyhedron with 4 to 8 sides (ARB8) - Task Closed Congratulations, this task has been completed successfully. http://www.google-melange.com/gci/task/view/google/gci2012/7959221 |
| 14:41.58 | Notify | 03GCI: Sean: Implement a primitive centroid function ... for extruded bitmaps (EBM) - follow-on We'll likely have a follow-on task to confirm that your implementation works (maybe a unit test), but it looks reasonable at a glance. Thanks for your efforts and bonus points for updating the analyze command call and identifying that existing... http://www.google-melange.com/gci/task/view/google/gci2012/7998216 |
| 14:41.59 | Notify | 03GCI: Sean: Implement a primitive centroid function ... for extruded bitmaps (EBM) - blah sorry, ignore that last "follow-on" post. browser cache woes with the melange interface. http://www.google-melange.com/gci/task/view/google/gci2012/7998216 |
| 14:42.00 | Notify | 03GCI: Sean: Implement a primitive centroid function ... for polyhedron with 4 to 8 sides (ARB8) - follow-on task We'll likely have a follow-on task to confirm that your implementation works (maybe a unit test), but it looks reasonable at a glance. Thanks for your efforts including bonus points for cleaning up analyze command and identifying... http://www.google-melange.com/gci/task/view/google/gci2012/7959221 |
| 14:42.01 | Notify | 03GCI: Ashish: Crash Archer reliably - Am i doing it Right This is just a test file to Please tell me is this what i am supposed to do ?? http://www.google-melange.com/gci/task/view/google/gci2012/8021209 |
| 14:42.02 | Notify | 03GCI: Sean: Implement a primitive centroid function ... for extruded bitmaps (EBM) - real name fernozzle, if you provide your real name, we'll include it within our authorship file to reflect your code contribution. http://www.google-melange.com/gci/task/view/google/gci2012/7998216 |
| 14:42.03 | Notify | 03GCI: fernozzle: Implement a primitive centroid function ... for extruded bitmaps (EBM) - Real name My real name is Michael Huang. Thanks for the support! I really appreciate it! http://www.google-melange.com/gci/task/view/google/gci2012/7998216 |
| 14:42.04 | Notify | 03GCI: fernozzle: Implement a primitive volume function ... for right hyperbolic cylinders (RHC) - Task Claimed I would like to work on this task. http://www.google-melange.com/gci/task/view/google/gci2012/7960224 |
| 14:42.05 | Notify | 03GCI: Sean: Model a "B" using BRL-CAD - g2asc The g2asc command (outside of mged) will convert a .g file to a .asc file, but you made it into a single region regrardless. The shader you chose is funky with those discontinuities, but we'll not get picky on aesthetic quality. ;) Thanks for your effort! http://www.google-melange.com/gci/task/view/google/gci2012/7949231 |
| 14:42.06 | Notify | 03GCI: Sean: Model a "B" using BRL-CAD - Task Closed Congratulations, this task has been completed successfully. http://www.google-melange.com/gci/task/view/google/gci2012/7949231 |
| 14:42.07 | Notify | 03GCI: Sean: Set up Jenkins continuous integration for BRL-CAD - Task Closed Congratulations, this task has been completed successfully. http://www.google-melange.com/gci/task/view/google/gci2012/7952233 |
| 14:42.08 | Notify | 03GCI: Sean: Set up Jenkins continuous integration for BRL-CAD - follow-on tasks Moin, thanks for your efforts getting it set up. I think the original description may have been a little over-ambitious, so I'm not holding that against you. ;) Thanks for the fantastic write-up too, that should help the next person continue, whether that's you... http://www.google-melange.com/gci/task/view/google/gci2012/7952233 |
| 14:42.09 | Notify | 03GCI: Sean: Reduce duplicate code in htonf.c - Task Needs More Work One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the requirements needed to complete this task, submit your work again and mark the task as complete once you re-submit your work. http://www.google-melange.com/gci/task/view/google/gci2012/7966230 |
| 14:42.10 | Notify | 03GCI: Sean: Reduce duplicate code in htonf.c - non-conformant style Thanks for your efforts but the latest patch still has style conformancy problems. See our HACKING file at the top-level of our source distribution for details, but basically the indentation is inconsistent in some places, wrong in others, and and you have an opening brace... http://www.google-melange.com/gci/task/view/google/gci2012/7966230 |
| 14:42.11 | Notify | 03GCI: Sean: Add missing documentation (for any ONE command) - Task Needs More Work One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the requirements needed to complete this task, submit your work again and mark the task as complete once you re-submit your work. http://www.google-melange.com/gci/task/view/google/gci2012/7972228 |
| 14:42.12 | Notify | 03GCI: Sean: Add missing documentation (for any ONE command) - incomplete While the write-up itself looks okay (at a glance, didn't review in detail for accuracy), the patch is incomplete and the file is invalid XML. You need to add your file to the doc/docbook/system/man1/en/CMakeLists.txt and Makefile.am files so that it will compile. Doing... http://www.google-melange.com/gci/task/view/google/gci2012/7972228 |
| 14:42.13 | Notify | 03GCI: Sean: Implement a primitive centroid function ... for extruded bitmaps (EBM) - quick to accept femnozzle, I was apparently way too quick to accept your task... :) Your table.c.diff file is rather incorrect (read it, did you change all of that? it says you did!) because you apparently worked on an old version and then diffed against a... http://www.google-melange.com/gci/task/view/google/gci2012/7998216 |
| 14:42.14 | Notify | 03GCI: Sean: Crash Archer reliably - IRC Discussed on IRC, we're looking for crashes that take the application down, not Tcl errors. http://www.google-melange.com/gci/task/view/google/gci2012/8021209 |
| 14:42.15 | Notify | 03GCI: Daniel Rossberg: Compile BRL-CAD using GCC 4.8 - Task Assigned This task has been assigned to Ambar Pal. You have 72 hours to complete this task, good luck! http://www.google-melange.com/gci/task/view/google/gci2012/7982223 |
| 14:42.16 | Notify | 03GCI: Daniel Rossberg: Implement a primitive volume function ... for right hyperbolic cylinders (RHC) - Task Assigned This task has been assigned to fernozzle. You have 72 hours to complete this task, good luck! http://www.google-melange.com/gci/task/view/google/gci2012/7960224 |
| 14:42.17 | Notify | 03GCI: Daniel Rossberg: Add a primitive surface area function ... for hyperboloids of one sheet (HYP) - patch16.patch compiles but I don't know if the formula is ok or if the elliptical cut-surfaces are already included. http://www.google-melange.com/gci/task/view/google/gci2012/7983225 |
| 14:42.18 | Notify | 03GCI: fernozzle: Implement a primitive centroid function ... for extruded bitmaps (EBM) - Patch Sorry about that. I had generated those previous patches on the locked-down Windows machines at school and hurriedly had to jump through all sorts of hoops to do so. Now that I'm at home, however, I have submitted a proper patch (which I have... http://www.google-melange.com/gci/task/view/google/gci2012/7998216 |
| 14:42.19 | Notify | 03GCI: fernozzle: Implement a primitive volume function ... for right hyperbolic cylinders (RHC) - Ready for review The work on this task is ready to be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/7960224 |
| 14:42.20 | Notify | 03GCI: Silvrous: Add a primitive surface area function ... for right hyperbolic cylinders (RHC) - Task Claimed I would like to work on this task. http://www.google-melange.com/gci/task/view/google/gci2012/7982218 |
| 14:42.21 | Notify | 03GCI: Anshul: Find and fix at least 10 spelling mistakes in at least 10 different files - Task Claimed I would like to work on this task. http://www.google-melange.com/gci/task/view/google/gci2012/7959223 |
| 14:42.22 | Notify | 03GCI: Lachlan P: Create a utility library (LIBBU) API unit test ... for avs.c - Ready for review The work on this task is ready to be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/7986218 |
| 14:42.23 | Notify | 03GCI: Lachlan P: Create a utility library (LIBBU) API unit test ... for avs.c - Oops Sorry, I missed something and therefore resubmitted the patch. Please use the latest :-) Thanks, Lachlan http://www.google-melange.com/gci/task/view/google/gci2012/7986218 |
| 14:42.24 | Notify | 03GCI: Ambar Pal: Compile BRL-CAD using GCC 4.8 - Password Required I have downloaded and run the image provided here http://brlcad.org/wiki/Deuces Now when I try to compile and enter the command sudo make install it asks for the password of the current user. Please tell me the password. You can mail it to me if you want ambarpal 1 9 9 6... http://www.google-melange.com/gci/task/view/google/gci2012/7982223 |
| 14:42.25 | Notify | 03GCI: Skriptkid: Add a primitive surface area function ... for hyperboloids of one sheet (HYP) - What Now? Do I need to find another formula? Or wait till you verify that? http://www.google-melange.com/gci/task/view/google/gci2012/7983225 |
| 14:42.26 | Notify | 03GCI: John: Write BRL-CAD News article on .deb/.rpm builds - Ready for review The work on this task is ready to be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/7945213 |
| 14:42.27 | Notify | 03GCI: Petar Stanev: Create an artistic screenshot - I have problem with stl-g importer I have problem with stl-g importer. Where i can see tutorial how to use it ? http://www.google-melange.com/gci/task/view/google/gci2012/8025213 |
| 14:42.28 | Notify | 03GCI: javamonn: Make tables.c not call system("cat ...") - Task Claimed I would like to work on this task. http://www.google-melange.com/gci/task/view/google/gci2012/7966235 |
| 14:42.29 | Notify | 03GCI: Shomiron Ghose: Reduce duplicate code in htonf.c - Now? Ok i used vim and to the best of my knowledge used the Hacking guide. the only thing that would be possibly non-compliant is the switch statement since it is not addressed in the hacking guide explicitly - i lined it up with the function statement as it is not specifically a... http://www.google-melange.com/gci/task/view/google/gci2012/7966230 |
| 14:42.30 | Notify | 03GCI: Shomiron Ghose: Reduce duplicate code in htonf.c - Ready for review The work on this task is ready to be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/7966230 |
| 14:42.31 | Notify | 03GCI: Petar Stanev: Create an artistic screenshot - I upload a file from .stl to .g I upload a file from .stl to .g ,but when i start it on Archer i cant see it. http://www.google-melange.com/gci/task/view/google/gci2012/8025213 |
| 14:42.32 | Notify | 03GCI: Andrei Tudorica: Create prototype 2D CAD drawing(s) - Ready for review The work on this task is ready to be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/7985229 |
| 14:42.33 | Notify | 03GCI: Skriptkid: Add a primitive surface area function ... for hyperboloids of one sheet (HYP) - Claim Removed The claim on this task has been removed, someone else can claim it now. http://www.google-melange.com/gci/task/view/google/gci2012/7983225 |
| 14:42.34 | Notify | 03GCI: Skriptkid: Set up BuildBot continuous integration for BRL-CAD - Task Claimed I would like to work on this task. http://www.google-melange.com/gci/task/view/google/gci2012/8006217 |
| 14:42.35 | Notify | 03GCI: Andrei Popescu: Find and fix at least 10 spelling mistakes in at least 10 different files - Task Assigned This task has been assigned to Anshul. You have 48 hours to complete this task, good luck! http://www.google-melange.com/gci/task/view/google/gci2012/7959223 |
| 14:42.36 | Notify | 03GCI: Andrei Popescu: Make tables.c not call system("cat ...") - Task Assigned This task has been assigned to javamonn. You have 48 hours to complete this task, good luck! http://www.google-melange.com/gci/task/view/google/gci2012/7966235 |
| 14:42.37 | Notify | 03GCI: Andrei Popescu: Add a primitive surface area function ... for right hyperbolic cylinders (RHC) - Task Assigned This task has been assigned to Silvrous. You have 72 hours to complete this task, good luck! http://www.google-melange.com/gci/task/view/google/gci2012/7982218 |
| 14:42.38 | Notify | 03GCI: Andrei Popescu: Set up BuildBot continuous integration for BRL-CAD - Task Assigned This task has been assigned to Skriptkid. You have 72 hours to complete this task, good luck! http://www.google-melange.com/gci/task/view/google/gci2012/8006217 |
| 14:42.39 | Notify | 03GCI: Daniel Rossberg: Add a primitive surface area function ... for hyperboloids of one sheet (HYP) - The hyp solid is an elliptical paraboloid http://mathworld.wolfram.com/EllipticHyperboloid.html Before requesting a claim be sure to have the right formulas handy and to have them understood. http://www.google-melange.com/gci/task/view/google/gci2012/7983225 |
| 14:42.40 | Notify | 03GCI: Petar Stanev: Create an artistic screenshot - I try I try .ply to .g same problem. http://www.google-melange.com/gci/task/view/google/gci2012/8025213 |
| 14:44.50 | ``Erik | <-- didn't say skriptkids patch was ok except for those changes, just that there were those changes... |
| 14:45.12 | *** join/#brlcad Skriptki_ (~Skriptkid@117.202.105.206) |
| 14:53.51 | caen23 | brlcad: the menu bar seems to be a child of the cmd win, so perhaps decoupling those would be a good first step. also, i think the close window event should be overriden to only "hide" the window, rather than close it |
| 14:54.35 | caen23 | as for closing mged when either window is closed, that can be done in one line |
| 15:09.19 | *** join/#brlcad Skriptkid (~Skriptkid@117.202.105.206) |
| 15:25.25 | *** join/#brlcad Skriptkid (~Skriptkid@117.202.105.206) |
| 15:30.08 | Notify | 03GCI: Awesomeness: Compile BRL-CAD using Dev-C++ - Task Claimed I would like to work on this task. http://www.google-melange.com/gci/task/view/google/gci2012/7945220 |
| 15:31.53 | Notify | 03GCI: zncurtis: Find and fix at least 20 spelling mistakes in at least 5 different files - Task Claimed I would like to work on this task. http://www.google-melange.com/gci/task/view/google/gci2012/8033204 |
| 15:33.49 | Notify | 03GCI: Harmanpreet Singh: Find and fix at least 20 spelling mistakes in at least 5 different files - Task Assigned This task has been assigned to zncurtis. You have 48 hours to complete this task, good luck! http://www.google-melange.com/gci/task/view/google/gci2012/8033204 |
| 15:35.45 | Notify | 03BRL-CAD Wiki:Jacksixb * 4729 /wiki/User:Jacksixb/Independent_Study_2012-13_Log: |
| 15:36.20 | brlcad | caen23: so if you can define the task that would get us closer to the goal as described, write that up and post it as a comment suggesting it as the goal |
| 15:36.32 | brlcad | we can then give the go-ahead and work on this task in chunks |
| 15:37.20 | brlcad | my thinking was something along the lines of close merely hiding the window and just keeping track if this is the last window, do cleanup and shutdown |
| 15:40.21 | caen23 | brlcad: i thought of something similar earlier, but at that point i didn't know how it all worked so i scratched the idea. i'll see if i can do that now |
| 15:40.39 | Notify | 03GCI: HS Rai: Write BRL-CAD News article on .deb/.rpm builds - A few correction John, You did a remarkable work. Just make following corrections: 1) In 2nd paragraph, replace "in" to "on" at two places; as it is "based on" and not "based in". 2) In 3rd paragraph, replace "working in BRL-CAD" "working with BRL-CAD" 3) In 3rd paragraph,... http://www.google-melange.com/gci/task/view/google/gci2012/7945213 |
| 15:42.04 | Notify | 03GCI: Ashish: Crash Archer reliably - Claim Removed The claim on this task has been removed, someone else can claim it now. http://www.google-melange.com/gci/task/view/google/gci2012/8021209 |
| 15:42.14 | Notify | 03GCI: zncurtis: Find and fix at least 20 spelling mistakes in at least 5 different files - Claim Removed The claim on this task has been removed, someone else can claim it now. http://www.google-melange.com/gci/task/view/google/gci2012/8033204 |
| 15:42.19 | Notify | 03GCI: Daniel Rossberg: Compile BRL-CAD using Dev-C++ - Task Assigned This task has been assigned to Awesomeness. You have 48 hours to complete this task, good luck! http://www.google-melange.com/gci/task/view/google/gci2012/7945220 |
| 15:47.21 | Notify | 03BRL-CAD:brlcad * 53977 brlcad/trunk/src/libbu/sscanf.c: windows is being royal. apparently we need I64 with newer versions of MSVC to get properly sized size_t/ptrdirr_t types. |
| 15:47.55 | Notify | 03GCI: Daniel Rossberg: Implement thread creation for Windows - Please provide a patch file and take our coding conventions into account (the HACKING file). http://www.google-melange.com/gci/task/view/google/gci2012/8030203 |
| 15:50.01 | Notify | 03BRL-CAD:brlcad * 53978 brlcad/trunk/src/libbu/sscanf.c: we don't have puts, use strcat |
| 15:50.11 | Notify | 03GCI: Awesomeness: Compile BRL-CAD using Dev-C++ - Claim Removed The claim on this task has been removed, someone else can claim it now. http://www.google-melange.com/gci/task/view/google/gci2012/7945220 |
| 15:53.56 | Notify | 03GCI: HS Rai: Write BRL-CAD News article on .deb/.rpm builds - Task Needs More Work One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the requirements needed to complete this task, submit your work again and mark the task as complete once you re-submit your work. http://www.google-melange.com/gci/task/view/google/gci2012/7945213 |
| 16:03.46 | Notify | 03GCI: Ashish: Categorize all of BRL-CAD's commands into a spreadsheet - Task Claimed I would like to work on this task. http://www.google-melange.com/gci/task/view/google/gci2012/7970237 |
| 16:08.12 | Notify | 03GCI: Melange: Create prototype 2D CAD drawing(s) - No more Work can be submitted Melange has detected that the deadline has passed and no more work can be submitted. The submitted work should be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/7985229 |
| 16:09.29 | *** join/#brlcad didi_bike (~didi_bike@89.190.213.140) |
| 16:15.04 | *** join/#brlcad maths22 (~maths22@173-167-152-209-illinois.hfc.comcastbusiness.net) |
| 16:16.06 | maths22 | brlcad: crit.brlcad.org is not reading .htacess files. The upgrade is othewise done. (the .htacess does url rewriting) |
| 16:16.18 | Notify | 03GCI: Petar Stanev: Create an artistic screenshot - Ready for review The work on this task is ready to be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/8025213 |
| 16:16.20 | maths22 | I meant .htaccess |
| 16:17.17 | *** join/#brlcad harmanpreet (~chatzilla@124.253.17.135) |
| 16:21.18 | *** join/#brlcad Ashish101 (75c225d5@gateway/web/freenode/ip.117.194.37.213) |
| 16:22.57 | Ashish101 | @brlcad: I didnt have any previous experience of crash testing, was finding it very difficult .. So i quite it and joined this one - http://www.google-melange.com/gci/task/view/google/gci2012/7970237 please assign this task to me |
| 16:24.49 | Notify | 03GCI: Andrei Tudorica: Create prototype 2D CAD drawing(s) - Please Andrei Popescu, can I have your email adress please> as I see you take care of several tasks I plan to work on and I may need some help. http://www.google-melange.com/gci/task/view/google/gci2012/7985229 |
| 16:25.53 | brlcad | maths22: it is enabled, just not in user home-directories |
| 16:26.15 | brlcad | at least, it should be |
| 16:26.22 | maths22 | Mine is in the brlcad.org/d directory |
| 16:26.58 | maths22 | It is not parsed, as I tried inserting garbage and did not get a 500 error. |
| 16:27.53 | brlcad | ah, my bad -- someone did have an old config there |
| 16:28.24 | brlcad | try now |
| 16:29.05 | Notify | 03GCI: Harmanpreet Singh: Categorize all of BRL-CAD's commands into a spreadsheet - Task Assigned This task has been assigned to Ashish. You have 72 hours to complete this task, good luck! http://www.google-melange.com/gci/task/view/google/gci2012/7970237 |
| 16:29.28 | maths22 | It is parsed. I will now make it work. |
| 16:30.27 | Ashish101 | @Harmanpreet: Thanks for assigning the task... it is mentions that a template will be provided- Any downoad links for that ?? |
| 16:31.41 | *** join/#brlcad xavortm (xavortm@93.155.146.15) |
| 16:33.41 | maths22 | The site is now live at brlcad.org. Beware: the wiki and gallery links do not yet work. |
| 16:33.48 | brlcad | Ashish101: I can do that, but it'll take me a little time to dig it up |
| 16:34.03 | brlcad | maths22: you mean crit? :) |
| 16:34.10 | maths22 | yes. |
| 16:34.45 | Notify | 03GCI: Jacob B: Upgrade Drupal website - Ready for review The work on this task is ready to be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/7958216 |
| 16:36.23 | Ashish101 | KK till then ill start with the work -- what format u want it to be in ?? Cause there are lots of option but i dont know which ones u prefer |
| 16:37.22 | Notify | 03BRL-CAD:carlmoore * 53979 (brlcad/trunk/bench/benchmark.1 brlcad/trunk/bench/pixcmp.1 and 10 others): remove trailing blanks/tabs (understood to exclude files like nirt.sh) |
| 16:42.32 | xavortm | Hey, brlcad, can you tell me if my job is done? |
| 16:44.02 | brlcad | xavortm: not right now unfortunately |
| 16:44.30 | brlcad | there are other mentors working on tasks, you'll just have to be patient or look at your work yourself and see if you can think of any ways to improve it |
| 16:45.56 | xavortm | Well, if there is no feedback i wont be able to fix the issues. I mean ... there is deadline and i do nothing for more than 30 hours. |
| 16:45.57 | *** join/#brlcad Skriptkid (~Skriptkid@117.202.105.206) |
| 16:46.36 | brlcad | xavortm: unless you find the issues yourself |
| 16:47.07 | brlcad | i'm surprised how many times I've been finding really basic problems with submissions where the submitter didn't bother to compiler or read what they submitted |
| 16:47.15 | brlcad | have you checked your work? |
| 16:47.35 | brlcad | which is your task? |
| 16:47.54 | xavortm | http://www.google-melange.com/gci/task/view/google/gci2012/7960223 |
| 16:48.07 | xavortm | i did all the things you said to me (i hope i understood well) |
| 16:48.38 | brlcad | AH, so xavortm that's part of the problem |
| 16:48.48 | brlcad | if you think you're done, you need to denote that |
| 16:49.06 | brlcad | according to that page, you just uploaded some work but aren't done with it |
| 16:49.40 | brlcad | how are the mentors reviewing supposed to know when you're done or are expecting a review? they're not all on IRC |
| 16:50.24 | brlcad | also, rar files are rather annoying.. can you make it a tar.gz or tar.bz2? |
| 16:50.54 | brlcad | it's fine if that's all you have, but not a common compression format amongst most open source folks |
| 16:51.41 | *** join/#brlcad Skriptkid (~Skriptkid@117.202.105.206) |
| 16:51.58 | Notify | 03GCI: Sean: Create prototype CAD GUI layout diagram - Deadline extended The deadline of the task has been extended with 1 days and 0 hours. http://www.google-melange.com/gci/task/view/google/gci2012/7960223 |
| 16:53.01 | andrei | xavortm: Sean should correct me if I'm wrong, but as far as I know the "safest" format for you to use is .zip |
| 16:53.40 | starseeker | brlcad: the Windows build should be building the xmllint tool |
| 16:53.50 | xavortm | Well i didnt know that sorry, i am looking for a way to save it as tar.gz now. I will reupload it after a few minutes. |
| 16:54.51 | starseeker | brlcad: i.e., it's guaranteed the same way xsltproc is guaranteed |
| 16:54.53 | Notify | 03BRL-CAD:carlmoore * 53980 brlcad/trunk/src/librt/primitives/arb8/arb8.c: fix spelling in a comment |
| 16:54.59 | brlcad | andrei: even windows will unpack a tgz/tbz2, so I'd go with the better compressor :) |
| 16:55.09 | brlcad | starseeker: so then something's busted |
| 16:55.23 | andrei | ah, I didn't know windows works with tgz |
| 16:55.25 | starseeker | we have no report of a failed command? |
| 16:55.27 | brlcad | unfortunately, no build log, just a report |
| 16:55.45 | starseeker | checks the only thing he can think of, based on xsltproc experience... |
| 16:55.46 | brlcad | report that it failed trying to run xmllint |
| 16:55.51 | brlcad | maybe the lint itself failed |
| 16:56.16 | xavortm | *.tar is ok? |
| 16:56.56 | brlcad | 4:58 < mansi22> Project : error PRJ0019: A tool returned an error code from "Validating DocBook source with xmllint:" |
| 16:57.04 | brlcad | xavortm: compress it... |
| 16:57.32 | brlcad | .tar.bz2 or .tar.gz, either |
| 16:57.53 | mansi22 | ??? |
| 16:58.17 | Skriptkid | brlcad: I've claimed the CI task. Need help getting set up. |
| 16:58.18 | brlcad | mansi22: you're back -- do you have details on that error? |
| 16:58.23 | brlcad | mansi22: perhaps a full build log? |
| 16:58.45 | brlcad | Skriptkid: you don't already have a web account right? |
| 16:59.04 | mansi22 | someone replied it's a documentation error. Is it nessary for it to work? |
| 16:59.07 | starseeker | mansi22: there are a couple of possibilities for xmllint failing on Windows - it's quite finicky |
| 16:59.11 | Skriptkid | brlcad: On? |
| 16:59.28 | brlcad | our web server |
| 16:59.32 | Skriptkid | Nope |
| 16:59.46 | starseeker | mansi22: the more detail we can get on how the tool failed, the better |
| 17:01.35 | starseeker | mansi22: to answer your question - yes, it needs to work |
| 17:01.53 | starseeker | at least, I would regard the failure you've decribed as a build failure that needs to be fixed |
| 17:03.15 | Notify | 03BRL-CAD Wiki:180.194.172.94 * 4730 /wiki/Dog_Collars_-_What_You_Need_To_Know: New page: Vitamin D is a hormone that many medical experts say can not only prevent fractures in the elderly but also prolong their life expectancy. It is one of the recommended hormonal supplements... |
| 17:03.17 | mansi22 | alright, i'm compiling it again. then will add it on pastebin |
| 17:03.49 | andrei | mansi22: use something else than pastebin, try paste.lisp.org or slexy.org :) |
| 17:04.44 | xavortm | Ok, i uploaded the file (2 images + 2 psd files) |
| 17:10.06 | Skriptkid | brlcad: next? |
| 17:10.45 | Notify | 03BRL-CAD Wiki:Jacksixb * 4731 /wiki/User:Jacksixb/Independent_Study_2012-13_Log: |
| 17:12.09 | mansi22 | http://slexy.org/view/s26yFIKOSQ |
| 17:13.24 | starseeker | mansi22: are you using the latest svn checkout? |
| 17:13.58 | mansi22 | lemme check |
| 17:14.14 | starseeker | doesn't look like it to me - some of those are validating, some arent |
| 17:14.31 | starseeker | caen23 did a lot of work recently to make everything validate |
| 17:14.35 | mansi22 | Release 7.22.2 |
| 17:15.16 | starseeker | that doesn't make any sense - newest release is 7.22.0 |
| 17:15.26 | starseeker | dev release (current development trunk) is 7.22.1 |
| 17:15.55 | mansi22 | readme file says so |
| 17:16.21 | starseeker | readme file is cheating - check include/conf |
| 17:16.27 | starseeker | MAJOR MINOR and PATCH files |
| 17:16.41 | starseeker | mansi22: plus that won't tell you if your subversion repository is up to date |
| 17:17.02 | starseeker | you should run svn update and see what revision number is reported |
| 17:17.15 | Notify | 03BRL-CAD:n_reed * 53981 brlcad/trunk/src/libbu/sscanf.c: at least since .NET 2003 (v7.1) no width specifier is needed for size_t or ptrdiff_t |
| 17:19.03 | caen23 | as far as i can see, it complains about the "info" tags we added to fix the warnings. but the reference says it's ok: http://docbook.org/tdg5/en/html/refentry.html |
| 17:19.21 | mansi22 | ah, it's MAJOR - 7 MINOR - 22 PATCH - 1 |
| 17:19.35 | starseeker | mansi22: what about svn update? |
| 17:20.10 | mansi22 | doing i |
| 17:20.14 | mansi22 | doing it |
| 17:20.31 | starseeker | is it pulling any docbook updates? |
| 17:20.49 | mansi22 | revision 53981, am i right track? |
| 17:20.51 | Notify | 03BRL-CAD:n_reed * 53982 brlcad/trunk/src/libbu/sscanf.c: typo |
| 17:20.58 | starseeker | mansi22: yes |
| 17:21.09 | starseeker | mansi22: did it grab any xml file changes when you ran it? |
| 17:21.41 | mansi22 | yes, and also docbook you mentioned before |
| 17:21.42 | starseeker | if so, you may want to re-try the build |
| 17:21.52 | mansi22 | you mean CMake? |
| 17:22.08 | starseeker | re-run CMake, then try to compile again |
| 17:22.14 | mansi22 | alright |
| 17:28.23 | *** join/#brlcad hsrai_ (~quassel@202.164.53.117) |
| 17:36.38 | *** join/#brlcad Silvrous (4f706699@gateway/web/freenode/ip.79.112.102.153) |
| 17:37.21 | Silvrous | Any idea why I can't view my completed tasks list anymore? |
| 17:38.06 | Notify | 03BRL-CAD Wiki:62.28.72.245 * 4732 /wiki/Community_Publication_Portal: /* Linux Release Packaging Process: A mission for Jordi Sayol */ |
| 17:38.16 | Notify | 03BRL-CAD:n_reed * 53983 brlcad/trunk/src/libbu/vls_vprintf.c: handle z and t width specifiers the same way |
| 17:40.27 | brlcad | Silvrous: could be related to the leaderboard |
| 17:43.22 | *** join/#brlcad archivist (~archivist@host81-149-189-98.in-addr.btopenworld.com) |
| 17:44.36 | Silvrous | @brlcad: I see. Another thing... well, this is awkward, but in the sourceforge commit you credited Ashwin Lokkur with the arb8 centroid patch, but I was the one who actually did it. I'm already listed as contributor, though, so it doesn't really matter. |
| 17:45.02 | brlcad | Silvrous: gah, really? |
| 17:45.13 | brlcad | I'm sorry about that |
| 17:45.47 | Notify | 03BRL-CAD:n_reed * 53984 (brlcad/trunk/src/librt/primitives/pipe/pipe.c brlcad/trunk/src/librt/primitives/tgc/tgc.c): change minimum curve counts |
| 17:46.56 | brlcad | oh, I see what happened, that person claimed before you and gave up |
| 17:47.24 | Silvrous | No problem, as I said, it doesn't really matter since I'm already there, but I wanted you to know just in case. |
| 17:48.04 | xavortm | i Hope i am not anoying with only asking but, did you checked it? Is this what you told me to do yesterday? :) |
| 17:48.47 | Notify | 03BRL-CAD:brlcad * 53985 brlcad/trunk/AUTHORS: arb8 primtive centroid was NOT contributed by ashwin lokkur, it was from silvrous (Ungureanu, Silviu) who is already credited for a previous contribution. |
| 17:48.52 | brlcad | Silvrous: authors is but one place that will get documented, and the history of that files matters so we need to get it right |
| 17:49.16 | brlcad | you'll also be credited in our NEWS file in our next binary release of BRL-CAD |
| 17:49.50 | brlcad | which gets posted all over and sent out to variou snews channels |
| 17:50.10 | Silvrous | Whoa. That's awesome :) |
| 17:56.55 | *** join/#brlcad Skriptkid (~Skriptkid@117.202.105.206) |
| 17:59.06 | caen23 | brlcad: regarding my task, i'm almost done, but i was trying to have the closed window come back with "Tools->Graphics/Command Window". it works for bringing back the Command Window, but if i delete the graphics win and try to bring it back up with the same menu, the app crashes. i haven't been able to figure out why, and i don't know how to debug the script (or at least get a log of what happened). is there any (proper) way i can debug? |
| 17:59.49 | caen23 | googling hasn't helped much except for "puts" |
| 18:04.44 | brlcad | caen23: so yes (and posting the crash backtrace might be a valid submission for the task), you can run gdb --args mged -c |
| 18:04.55 | brlcad | mged will run in classic console mode |
| 18:05.07 | brlcad | run the "gui" command and you'll have the tcl/tk gui displayed |
| 18:05.17 | brlcad | if it crashes, you'll be in mged |
| 18:05.23 | brlcad | er, gdb |
| 18:05.55 | caen23 | thanks, let me try |
| 18:06.34 | brlcad | if you haven't used gdb before, a tutorial may be in order |
| 18:06.43 | Notify | 03GCI: Skriptkid: Set up BuildBot continuous integration for BRL-CAD - SSH figured out Read up on SSH. Logged in and created dir "Skriptkid" in the home folder(Just to test). What do I need to do next? If I need to come on IRC, I'll be there at about this time(or a bit before) tomorrow. http://www.google-melange.com/gci/task/view/google/gci2012/8006217 |
| 18:06.47 | brlcad | run command starts, backtrace will tell you where you crashed |
| 18:07.17 | brlcad | list will show you the code on the line it stopped on |
| 18:07.28 | brlcad | break function will set a breakpoint on function() calls |
| 18:09.45 | caen23 | i am familiar with gdb, thanks :D it seems to have crashed with "error: xp_attach_gl_context returned: 2" |
| 18:12.53 | caen23 | googling the error, it seems most of the results are related to os x. hmm… could i upload a patch to gci and have someone see if it crashes on linux, too? |
| 18:19.35 | Notify | 03GCI: Mitsuhide: Create an RTWizard screenshot - Task Claimed I would like to work on this task. http://www.google-melange.com/gci/task/view/google/gci2012/8034204 |
| 18:26.36 | Notify | 03GCI: Harmanpreet Singh: Create an RTWizard screenshot - Task Assigned This task has been assigned to Mitsuhide. You have 48 hours to complete this task, good luck! http://www.google-melange.com/gci/task/view/google/gci2012/8034204 |
| 18:28.01 | brlcad | caen23: sure |
| 18:35.17 | Notify | 03GCI: Cezar: Close MGED when both windows are closed - Testing on Linux I've written the patch on OS X, but mged seems to crash if you follow the steps described inside `osx_crash_log.txt`. Since this appears to be a Mac/XQuartz-specific error, could someone on a Linux machine please try running it to see if it still crashes? http://www.google-melange.com/gci/task/view/google/gci2012/7945212 |
| 18:35.45 | caen23 | ugh, really need to install virtual ubuntu/windows |
| 18:41.23 | Notify | 03GCI: Shayantan: Layout "MGED Interface" Reference Document - Task Claimed I would like to work on this task. http://www.google-melange.com/gci/task/view/google/gci2012/7953233 |
| 18:43.48 | Notify | 03GCI: Mitsuhide: Create an RTWizard screenshot - Import hello :) I am a 3d designer and I would like to know can I import a model in BRL CAD from 3ds max http://www.google-melange.com/gci/task/view/google/gci2012/8034204 |
| 18:45.12 | *** join/#brlcad maths22 (~maths22@173-167-152-209-illinois.hfc.comcastbusiness.net) |
| 18:58.48 | *** join/#brlcad merzo (~merzo@88-20-133-95.pool.ukrtel.net) |
| 19:13.33 | Notify | 03BRL-CAD:n_reed * 53986 brlcad/trunk/src/librt/primitives/arb8/arb8.c: replace macro and avoid extra magnitude calculation |
| 19:21.48 | Notify | 03GCI: Melange: Add missing documentation (for any ONE command) - Task Reopened Melange has detected that the final deadline has passed and it has reopened the task. http://www.google-melange.com/gci/task/view/google/gci2012/7972228 |
| 19:22.18 | Notify | 03GCI: Will Bensky: Add missing documentation (for any ONE command) - Task Claimed I would like to work on this task. http://www.google-melange.com/gci/task/view/google/gci2012/7972228 |
| 19:23.03 | Notify | 03GCI: Andrei Popescu: Layout "MGED Interface" Reference Document - Task Assigned This task has been assigned to Shayantan. You have 72 hours to complete this task, good luck! http://www.google-melange.com/gci/task/view/google/gci2012/7953233 |
| 19:23.23 | Notify | 03GCI: Andrei Popescu: Add missing documentation (for any ONE command) - Task Assigned This task has been assigned to Will Bensky. You have 48 hours to complete this task, good luck! http://www.google-melange.com/gci/task/view/google/gci2012/7972228 |
| 19:30.32 | *** join/#brlcad M0J0E (~johannes@p4FDFB3D7.dip.t-dialin.net) |
| 19:41.05 | *** join/#brlcad andrei (~andrei@188.25.158.113) |
| 19:59.34 | Notify | 03GCI: John: Write BRL-CAD News article on .deb/.rpm builds - Ready for review The work on this task is ready to be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/7945213 |
| 20:05.39 | Notify | 03GCI: Giovanny Gongora: Reproduce any 10 unconfirmed open bug reports - Task Claimed I would like to work on this task. http://www.google-melange.com/gci/task/view/google/gci2012/7971223 |
| 20:06.49 | Notify | 03GCI: Giovanny Gongora: Reproduce any 10 unconfirmed open bug reports - Claim Removed The claim on this task has been removed, someone else can claim it now. http://www.google-melange.com/gci/task/view/google/gci2012/7971223 |
| 20:09.44 | Notify | 03GCI: Sean: Set up BuildBot continuous integration for BRL-CAD - wrong dir The directory you created will not help you. The directory you start in is already your home directory. You need to create a directory specifically called public_html and you can install buildbot there. You will be able to access that directory at... http://www.google-melange.com/gci/task/view/google/gci2012/8006217 |
| 20:17.30 | *** join/#brlcad andrei_ (~andrei@188.25.158.113) |
| 20:17.51 | *** join/#brlcad PrezKennedyX (~DarkCalf@2002:ade7:2862::ade7:2862) |
| 20:22.17 | Notify | 03GCI: Mitsuhide: Create an RTWizard screenshot - Ready for review The work on this task is ready to be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/8034204 |
| 20:25.15 | starseeker | mansi22: any luck? |
| 20:40.11 | *** join/#brlcad andrei (~andrei@188.25.158.113) |
| 20:44.21 | *** join/#brlcad andrei_ (~andrei@188.25.158.113) |
| 20:53.40 | Notify | 03GCI: Melange: Create an artistic screenshot - No more Work can be submitted Melange has detected that the deadline has passed and no more work can be submitted. The submitted work should be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/8025213 |
| 20:57.43 | Notify | 03BRL-CAD:n_reed * 53987 brlcad/trunk/src/librt/primitives/tgc/tgc.c: use a more accurate dimension estimate when choosing number of connecting lines to plot |
| 21:04.03 | Notify | 03BRL-CAD:carlmoore * 53988 brlcad/trunk/src/librt/primitives/pipe/pipe_brep.cpp: fix sentence (removing 's' and fixing 'endedge' -- notice it is only a comment) |
| 21:04.48 | Notify | 03GCI: Sean: Create an RTWizard screenshot - almost there Almost there. Note this in the original description: "Don't just pick the most basic mode, pick one of the more complicated multi-pass renderings and showcase the entire interface." The screenshot looks great, though I would suggest dropping the console window so you can emphasize the... http://www.google-melange.com/gci/task/view/google/gci2012/8034204 |
| 21:05.07 | Notify | 03GCI: Sean: Create an RTWizard screenshot - Task Needs More Work One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the requirements needed to complete this task, submit your work again and mark the task as complete once you re-submit your work. http://www.google-melange.com/gci/task/view/google/gci2012/8034204 |
| 21:06.33 | Notify | 03GCI: Sean: Create an artistic screenshot - you have to tell archer You have to tell archer what you want it to display. Notice the hierarchy view on the left. There's a label that says "all". Try double-clicking or right-clicking that. http://www.google-melange.com/gci/task/view/google/gci2012/8025213 |
| 21:06.34 | Notify | 03GCI: Sean: Create an artistic screenshot - Task Needs More Work One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the requirements needed to complete this task, submit your work again and mark the task as complete once you re-submit your work. http://www.google-melange.com/gci/task/view/google/gci2012/8025213 |
| 21:07.33 | Notify | 03GCI: Diana Boyadjieva: Create an ISST screenshot or animation - Ready for review The work on this task is ready to be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/7945221 |
| 21:07.48 | Notify | 03GCI: Sean: Create prototype 2D CAD drawing(s) - Deadline extended The deadline of the task has been extended with 1 days and 0 hours. http://www.google-melange.com/gci/task/view/google/gci2012/7985229 |
| 21:12.43 | Notify | 03GCI: Andrei Tudorica: Create prototype 2D CAD drawing(s) - ... is the prototype ok? if it isn't,any advice on what I should repair? http://www.google-melange.com/gci/task/view/google/gci2012/7985229 |
| 21:13.24 | Notify | 03BRL-CAD:carlmoore * 53989 brlcad/trunk/src/tclscripts/rtwizard/lib/FbPage.itk: fix spelling of 'height' -- OK there, RIGHT?? |
| 21:18.09 | Notify | 03GCI: Johannes Schulte: Add a primitive surface area function ... for triangle meshes (BOT) - Deadline As I don't want to get into trouble with the deathline, I have submitted now my first patch. The algorithm itself is really ready for review. As I didn't got an answer to my error questions fast enough, I chose to easiest way, just... http://www.google-melange.com/gci/task/view/google/gci2012/7968224 |
| 21:18.24 | Notify | 03GCI: Johannes Schulte: Add a primitive surface area function ... for triangle meshes (BOT) - Ready for review The work on this task is ready to be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/7968224 |
| 21:19.04 | Notify | 03GCI: Sean: Create prototype 2D CAD drawing(s) - not understanding the task? Andrei, I think you might not be understanding this task. Your latest image makes for an interesting visual aid that might make for an interesting diagram of some sort, but it's not what is being expected for this task. The emphasis is on *prototype*. Assume you... http://www.google-melange.com/gci/task/view/google/gci2012/7985229 |
| 21:19.14 | Notify | 03GCI: Sean: Create prototype 2D CAD drawing(s) - Task Needs More Work One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the requirements needed to complete this task, submit your work again and mark the task as complete once you re-submit your work. http://www.google-melange.com/gci/task/view/google/gci2012/7985229 |
| 21:20.09 | Notify | 03GCI: Sean: Reduce duplicate code in htonf.c - Task Needs More Work One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the requirements needed to complete this task, submit your work again and mark the task as complete once you re-submit your work. http://www.google-melange.com/gci/task/view/google/gci2012/7966230 |
| 21:23.49 | Notify | 03GCI: Matt S.: Add a primitive surface area function ... for triangle meshes (BOT) - Deadline extended The deadline of the task has been extended with 2 days and 0 hours. http://www.google-melange.com/gci/task/view/google/gci2012/7968224 |
| 21:24.15 | Notify | 03GCI: Sean: Reduce duplicate code in htonf.c - still not conformant If you're using vim, you should be able to ":set modeline" to have it parse our footer, then you can auto-indent the entire file. Note the body of the two functions, for example -- you do not indent the convert_float() calls and they should be. Similarly, your latest version... http://www.google-melange.com/gci/task/view/google/gci2012/7966230 |
| 21:24.25 | Notify | 03GCI: Sean: Reduce duplicate code in htonf.c - Deadline extended The deadline of the task has been extended with 0 days and 12 hours. http://www.google-melange.com/gci/task/view/google/gci2012/7966230 |
| 21:25.25 | *** join/#brlcad andrei (~andrei@188.25.158.113) |
| 21:26.06 | Notify | 03GCI: Andrei Tudorica: Create prototype 2D CAD drawing(s) - Q Would it be good if I make the bleprints of a memory stick rendering the side view, front view and top view on a landscape A4...? Or I get this all thing wrong and the idea is to describe generaly a A4 blueprint? http://www.google-melange.com/gci/task/view/google/gci2012/7985229 |
| 21:35.09 | Notify | 03BRL-CAD:n_reed * 53990 brlcad/trunk/src/librt/primitives/ehy/ehy.c: space curves evenly |
| 21:51.09 | Notify | 03BRL-CAD:n_reed * 53991 brlcad/trunk/src/librt/primitives/ehy/ehy.c: choose curve points based on estimated curve length |
| 21:51.38 | *** join/#brlcad lachlanp (~lachlan@ppp226-79.static.internode.on.net) |
| 21:52.48 | *** join/#brlcad crdueck (~cdk@24.212.219.10) |
| 21:53.17 | caen23 | brlcad: hmm… i've tried my patch on debian 6, and the error does seem to be xquartz-specific |
| 21:53.29 | caen23 | so i think the patch should be good to go, i'm marking the task as complete |
| 21:53.59 | Notify | 03GCI: Cezar: Close MGED when both windows are closed - Ready for review The work on this task is ready to be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/7945212 |
| 21:58.04 | *** join/#brlcad crdueck (~cdk@24-212-219-10.cable.teksavvy.com) |
| 22:07.51 | Notify | 03GCI: reikaze: Fix closedb - It doesn't look like it's any code in particular I've tried commenting out sections of ged_close, and the bug persists. If I comment out just the NULL line, it crashes in vls.h with a null pointer error or a mismatch error. http://www.google-melange.com/gci/task/view/google/gci2012/7958214 |
| 22:08.31 | Notify | 03GCI: Johannes Schulte: Add a primitive surface area function ... for triangle meshes (BOT) - Deadline extension Did you extend the deadline to give yourself more time to review my patch or do you expect action from me. If you expect action from me, it would be great, if you answer my questions, because otherwise, I don't know, what I have... http://www.google-melange.com/gci/task/view/google/gci2012/7968224 |
| 22:09.02 | *** join/#brlcad reikaze (4c45450b@gateway/web/freenode/ip.76.69.69.11) |
| 22:11.17 | Notify | 03GCI: reikaze: Fix closedb - The error message if you comment out the NULL assignment ERROR: 0xffffffffffffffff mis-aligned bu_vls pointer, file /home/quincy/gcodein2012/FIX CLOSEDB/brlcad-7.22.0/src/libbu/vls.c, line 188 So I guess I should be looking there, huh... http://www.google-melange.com/gci/task/view/google/gci2012/7958214 |
| 22:23.36 | *** join/#brlcad merzo (~merzo@147-59-132-95.pool.ukrtel.net) |
| 22:36.15 | reikaze | Hey, anyone know what bu_badmagic does? |
| 22:36.30 | lachlanp | is it a function? |
| 22:36.42 | reikaze | Yep. |
| 22:36.54 | lachlanp | will look it up :-) |
| 22:39.10 | lachlanp | seems like it just checks the magic number of a structure |
| 22:39.17 | lachlanp | and bu_bombs if it's not right |
| 22:39.40 | lachlanp | probably shouldn't be called by itself... use BU_CKMAG instead |
| 22:48.12 | *** join/#brlcad maths222 (~maths22@173-167-152-209-illinois.hfc.comcastbusiness.net) |
| 22:50.36 | reikaze | I see... thanks. |
| 23:14.52 | Notify | 03GCI: Sean: Create prototype 2D CAD drawing(s) - wrong question What geometry you use doesn't matter at all (in fact you could complete this task with no geometry, but it helps). It matters more what goes on the page, where they are placed on the page, how much space they consume, and most importantly WHY a particular layout. That's why ASME... http://www.google-melange.com/gci/task/view/google/gci2012/7985229 |
| 23:21.33 | Notify | 03GCI: Matt S.: Add a primitive surface area function ... for triangle meshes (BOT) - Stupid Mobile Phone... I could not enter text from my phone on this site for some reason, but what I wanted to say is that I find myself with very little free time this week. Thus, since you were concerned about the clock running out an I didn't think I'd be... http://www.google-melange.com/gci/task/view/google/gci2012/7968224 |
| 23:23.03 | Notify | 03GCI: Sean: Fix closedb - progress, but not understanding So that's progress, but that's not yet understanding of any particular bug that can be fixed. You'll need to trace through the code with print statements or (better) a debugger to see where the misaligned pointer is coming from or going even further back to understand the cause. If... http://www.google-melange.com/gci/task/view/google/gci2012/7958214 |
| 23:38.13 | *** join/#brlcad reikaze (4c45450b@gateway/web/freenode/ip.76.69.69.11) |
| 23:45.06 | Notify | 03GCI: Sean: Add a primitive surface area function ... for triangle meshes (BOT) - more questions Johannes, There are obviously lots of ways, but keeping the interface minimal is our usual approach. Since we don't yet know of multiple types of errors (and even this one suggested is temporary), the only cases we know about are unimplemented,... http://www.google-melange.com/gci/task/view/google/gci2012/7968224 |