| 00:31.03 | starseeker | brlcad: If I'm reading the docs for Gecode 4.0 correctly, it looks like it may now be able to solve the sorts of constraint equations we'd be looking at |
| 00:54.34 | starseeker | still a workout for the CPU when compiling |
| 01:23.06 | Notify | 03BRL-CAD:brlcad * 54892 (brlcad/trunk/src/libbu/CMakeLists.txt brlcad/trunk/src/libbu/Makefile.am and 2 others): collapse ispar.c into parallel.c even though we want to prefer smaller files. ispar was a bad non-descript name to begin with and the two functions it provides are weak. more importantly, the access a global that we can make static if we consolidate it to parallel.c |
| 01:28.18 | Notify | 03BRL-CAD:brlcad * 54893 brlcad/trunk/src/libbu/parallel.c: rename bu_pid_of_initiating_thread to not have the bu_ prefix since it's not a published global. make it static too to limit scope. |
| 01:45.32 | Notify | 03BRL-CAD:brlcad * 54894 brlcad/trunk/src/libbu/parallel.c: consistency, use arrow instead of parendotting |
| 01:59.10 | Notify | 03BRL-CAD:brlcad * 54895 brlcad/trunk/src/libbu/parallel.c: remove parallel support for SGI IRIX since it's a gone platform and keeping it here has become a maintenance burden (having to maintain and needing to improve/change a threading impl that cannot be tested) |
| 02:04.01 | Notify | 03BRL-CAD:brlcad * 54896 brlcad/trunk/src/libbu/parallel.c: since the interface is getting updates, same obsolescence holds true for our old cray, alliant, convex, ardent, and encore multimax |
| 02:11.28 | Notify | 03BRL-CAD:brlcad * 54897 brlcad/trunk/src/libbu/semaphore.c: do the same for semaphore support, remove the antiquated platforms (sgi, ardent, alliant, convex, cray, n16). make bu_semaphore_free() a thing too, instead of just an idea for releasing memory. |
| 02:11.48 | Notify | 03BRL-CAD:brlcad * 54898 brlcad/trunk/include/bu.h: declare the new bu_semaphore.free() function. |
| 02:29.51 | Notify | 03BRL-CAD:brlcad * 54899 brlcad/trunk/include/orle.h: convex is long gone |
| 02:31.01 | Notify | 03BRL-CAD:brlcad * 54900 brlcad/trunk/include/bu.h: remove support for cray, irix/sgi, convex, and ultrix. highly dependent on the compiler and makes the define seem to be much more complicated than it really is. |
| 02:34.58 | Notify | 03BRL-CAD:brlcad * 54901 (brlcad/trunk/include/rtgeom.h brlcad/trunk/src/libbu/semaphore.c and 4 others): remove support for platforms that are no longer even remotely accessible (sgi arguably is, but we should still compile there with gcc). remove accommodations and references to cray, sgi/irix, and alliant |
| 02:48.46 | *** part/#brlcad n_reed (~molto_cre@66-118-151-70.static.sagonet.net) |
| 03:42.11 | brlcad | hm, the migration still hasn't begun |
| 03:42.56 | brlcad | ``Erik: if that was /usr/web data, I have it backed up |
| 03:43.09 | brlcad | those files weren't sync'd (yet) |
| 03:58.51 | Notify | 03BRL-CAD:brlcad * 54902 (brlcad/trunk/CHANGES brlcad/trunk/include/bu.h): deprecated to obsolete: remove bu_get_load_average() and bu_set_realtime() |
| 04:01.29 | Notify | 03BRL-CAD:brlcad * 54903 brlcad/trunk/src/libbu/parallel.c: removed bu_get_load_average and bu_set_realtime. the latter is technically minimally impacting since the implementation has done nothing for a couple decades now. |
| 04:02.33 | Notify | 03BRL-CAD:brlcad * 54904 (brlcad/trunk/src/libbu/CMakeLists.txt brlcad/trunk/src/libbu/Makefile.am): deprecated to obsolete: remove bu_fopen_uniq() |
| 04:14.55 | Notify | 03BRL-CAD:brlcad * 54905 (brlcad/trunk/CHANGES brlcad/trunk/include/bu.h): deprecated to obsolete: remove declarations for bu_fopen_uniq() and bu_get_public_cpus() |
| 04:17.31 | Notify | 03BRL-CAD:brlcad * 54904 (brlcad/trunk/src/libbu/CMakeLists.txt brlcad/trunk/src/libbu/Makefile.am): deprecated to obsolete: remove bu_fopen_uniq() |
| 04:18.48 | Notify | 03BRL-CAD:brlcad * 54906 (brlcad/trunk/CHANGES brlcad/trunk/include/bu.h brlcad/trunk/src/libbu/parallel.c): remove bu_cpulimit_get() and bu_cpulimit_set() as a minimally impacting change since they've also pretty much done nothing for a couple decades. |
| 04:50.21 | Notify | 03BRL-CAD:brlcad * 54907 brlcad/trunk/src/libbu/parallel.c: clean up some of the failure logging and pass the thread cpu id numbers indexed from 1 to ncpu (inclusive). that way we can reserve cpu 0 for the parent process/thread that is creating all of the threads. stub in an initial bu_parallel_id() function to get the cpu id, but just checkpointing the work in progress because __thread is apparently unavailable on |
| 04:50.22 | Notify | Mac OS X. |
| 04:52.02 | Notify | 03BRL-CAD:brlcad * 54908 brlcad/trunk/src/libbu/parallel.c: make sure windows is consistent with stashing cpu ids from 1 to ncpu too |
| 04:53.18 | Notify | 03BRL-CAD:brlcad * 54909 brlcad/trunk/src/libbu/parallel.c: bu_get_public_cpus() went bye bye |
| 04:53.39 | brlcad | It looks like there is going to be a delay for the new server until tomorrow night |
| 08:28.02 | *** join/#brlcad jordisayol (~jordisayo@unaffiliated/jordisayol) |
| 10:49.57 | *** join/#brlcad witness (uid10044@gateway/web/irccloud.com/x-kmepvsuuoqzwxsmb) |
| 11:06.09 | *** join/#brlcad milamber (~devlin@d118-75-244-176.try.wideopenwest.com) |
| 11:40.54 | *** join/#brlcad n_reed (~molto_cre@66-118-151-70.static.sagonet.net) |
| 12:39.52 | *** join/#brlcad hsrai (~hsrai@202.164.53.116) |
| 13:10.29 | Notify | 03BRL-CAD:brlcad * 54910 brlcad/trunk/src/rt/do.c: remove the old cray cpulimit call, didn't do anything useful anywhere else and the func is now gone |
| 14:21.10 | ``Erik | ls - l |
| 14:21.19 | ``Erik | heh, whups |
| 14:21.27 | jordisayol | :-) |
| 14:35.15 | *** join/#brlcad brlcad (~sean@66-118-151-70.static.sagonet.net) |
| 14:35.21 | brlcad | woot |
| 14:36.23 | ``Erik | httpd not up? |
| 14:36.46 | *** join/#brlcad n_reed (~molto_cre@66-118-151-70.static.sagonet.net) |
| 14:37.12 | *** join/#brlcad Notify (~notify@66-118-151-70.static.sagonet.net) |
| 14:43.08 | brlcad | it is now, curious that it didn't start automatically |
| 14:43.33 | ``Erik | log has lots of freakout from trying to boot with bad network info, they didn't change it in single user mode or before the swap |
| 14:44.00 | ``Erik | something in the config probably tries to resolve and address, and gave up when that failed |
| 14:44.23 | brlcad | nods |
| 14:45.04 | brlcad | sounds like exactly as you described, they needed to update the network config but then all was fine |
| 14:48.46 | ``Erik | clock was all wonky, too |
| 14:50.07 | brlcad | "We had no problems, we just had to add the IP and gateway to the /etc/rc.conf file and it came online." |
| 14:50.22 | brlcad | wears the IP was already there, dunno about the gateway |
| 14:50.48 | brlcad | s/wears/swears/ |
| 14:51.24 | *** join/#brlcad Notify (~notify@66-118-151-70.static.sagonet.net) |
| 14:51.25 | Notify | 03BRL-CAD:bob1961 * 54913 brlcad/trunk/src/other/tk/library/panedwindow.tcl: Apply previous fixes to ::tk::panedwindow::Motion and ::tk::panedwindow::MarkSash. |
| 14:53.27 | *** join/#brlcad Notify (~notify@66-118-151-70.static.sagonet.net) |
| 14:53.28 | Notify | 03BRL-CAD:bob1961 * 54913 brlcad/trunk/src/other/tk/library/panedwindow.tcl: Apply previous fixes to ::tk::panedwindow::Motion and ::tk::panedwindow::MarkSash. |
| 15:02.32 | brlcad | elfga core dump |
| 15:02.37 | ``Erik | yes |
| 15:02.59 | ``Erik | something with how I load things into sbcl is a bit twitchy, have it up now, though |
| 15:06.41 | ``Erik | hw.ncpu: 8 |
| 15:06.42 | ``Erik | hw.physmem: 3740434432 |
| 15:11.40 | brlcad | giggles like a little school girl |
| 15:20.50 | ``Erik | adds -j8 to the make.conf and tries a portupgrade O.o |
| 15:40.42 | *** join/#brlcad Skriptkid (~Skriptkid@117.202.97.44) |
| 15:40.42 | brlcad | heh |
| 15:40.51 | brlcad | curious to know what the vgr count looks like |
| 15:47.11 | ``Erik | 2.5 ghz xeons, should be a bit less than the office 8 core xeon servers |
| 16:02.22 | *** join/#brlcad merzo (~merzo@68-104-133-95.pool.ukrtel.net) |
| 16:54.37 | *** join/#brlcad jordisayol (~jordisayo@unaffiliated/jordisayol) |
| 17:28.58 | *** join/#brlcad jordisayol (~jordisayo@unaffiliated/jordisayol) |
| 17:38.58 | *** join/#brlcad starseeker (~starseeke@66-118-151-70.static.sagonet.net) |
| 17:40.10 | starseeker | ``Erik: is Notify up? |
| 17:52.52 | brlcad | apparently not |
| 18:21.43 | *** join/#brlcad Notify (~notify@66-118-151-70.static.sagonet.net) |
| 18:22.00 | Notify | 03BRL-CAD:bob1961 * 54913 brlcad/trunk/src/other/tk/library/panedwindow.tcl: Apply previous fixes to ::tk::panedwindow::Motion and ::tk::panedwindow::MarkSash. |
| 18:22.09 | Notify | 03BRL-CAD:brlcad * 54914 brlcad/trunk/TODO: chan_ tools belong in util, not anim. terrible names too. |
| 18:22.13 | Notify | 03BRL-CAD:brlcad * 54911 brlcad/trunk/TODO: temp colors and temp matrices during ray tracing |
| 18:22.17 | Notify | 03BRL-CAD:bob1961 * 54915 (brlcad/trunk/src/tclscripts/archer/Archer.tcl brlcad/trunk/src/tclscripts/archer/ArcherCore.tcl): Added a preference for the max number of members displayed in Archer's tree for a combination. This prevents the GUI from locking when some user wants a few hundred thousand members in a single group (ttk::treeview doesn't handle this well). Also warn the user when all members are not |
| 18:22.19 | Notify | visible. |
| 18:22.23 | Notify | 03BRL-CAD:brlcad * 54912 brlcad/trunk/src/remrt/rtsrv.c: another cpulimit removal |
| 18:22.30 | Notify | 03BRL-CAD:starseeker * 54916 (brlcad/trunk/INSTALL brlcad/trunk/configure.cmake.sh brlcad/trunk/src/other/CMakeLists.txt): OK, make a better stab at this - a single commit that makes both tktreectrl and tkdnd packages available in BRL-CAD. Not clear yet if tkdnd is the right thing to use for tree element manipulation, but it will allow for support for things like dragging and dropping a .g file onto Archer to open |
| 18:22.32 | Notify | it. |
| 18:22.34 | Notify | 03BRL-CAD:starseeker * 54917 (brlcad/trunk/INSTALL brlcad/trunk/configure.cmake.sh brlcad/trunk/src/other/CMakeLists.txt): revert 54916 |
| 18:22.49 | Notify | 03BRL-CAD Wiki:Cfitzsimmons * 0 /wiki/User:Cfitzsimmons: |
| 18:22.51 | Notify | 03BRL-CAD:carlmoore * 54918 brlcad/trunk/src/util/pix-png.c: program works the same but the source code has been slightly shortened |
| 18:24.08 | Notify | 03BRL-CAD:bob1961 * 54919 brlcad/trunk/src/tclscripts/archer/ArcherCore.tcl: Minor tweak to ArcherCore::getTreeMembers. |
| 18:33.44 | Notify | 03BRL-CAD:bob1961 * 54920 brlcad/trunk/src/tclscripts/lib/Command.tcl: This fixes the Command::invoke method's mishandling of double quotes in nested commands. |
| 18:34.48 | *** join/#brlcad jordisayol (~jordisayo@unaffiliated/jordisayol) |
| 18:38.42 | *** join/#brlcad caen23 (~cezar@92.83.177.51) |
| 18:47.10 | *** join/#brlcad DarkCalf (~DarkCalf@173.231.40.98) |
| 19:44.08 | Notify | 03BRL-CAD:r_weiss * 54921 brlcad/trunk/src/libged/tables.c: Update to ged_tables to support bu_lseek on Windows 64bit. |
| 19:56.06 | *** part/#brlcad jordisayol (~jordisayo@unaffiliated/jordisayol) |
| 21:17.53 | Notify | 03BRL-CAD:r_weiss * 54922 (brlcad/trunk/src/libfb/if_X.c brlcad/trunk/src/libfb/if_X24.c and 7 others): Updates to libfb to support bu_lseek and improve Windows 64bit. Changed many "long" and "int" to "off_t", "size_t" or "ssize_t". |
| 21:19.52 | Notify | 03BRL-CAD:r_weiss * 54923 brlcad/trunk/include/fbio.h: Update to "fbio.h" changing the return for "_write" and "_read" to "ssize_t". |
| 21:26.29 | Notify | 03BRL-CAD:r_weiss * 54924 brlcad/trunk/src/libfb/if_X24.c: Update to file "if_X24.c" to support "bu_lseek" on Windows 64bit. |
| 21:35.20 | Notify | 03BRL-CAD:r_weiss * 54925 brlcad/trunk/src/fb/pp-fb.c: Update to "pp-fb.c", changing types for "bu_lseek" from "long" to "off_t". |
| 21:43.18 | Notify | 03BRL-CAD:r_weiss * 54926 brlcad/trunk/src/util/pixbustup.c: Update to "pixbustup.c" changing type for "bu_lseek" to "off_t". |
| 21:56.27 | Notify | 03BRL-CAD:r_weiss * 54927 brlcad/trunk/src/util/plrot.c: Change to print format for return value of bu_ftell. |
| 22:02.41 | *** join/#brlcad witness (uid10044@gateway/web/irccloud.com/x-qrspdignwhkoyxrf) |
| 22:19.18 | Notify | 03BRL-CAD:r_weiss * 54928 (brlcad/trunk/src/conv/iges/findp.c brlcad/trunk/src/conv/iges/iges_struct.h and 2 others): Updates to iges converter, changing some data types to "size_t" and "off_t" to support function "bu_ftell". |
| 23:59.22 | *** join/#brlcad DarkCalf (~DarkCalf@173.231.40.98) |