| 00:21.37 | *** join/#brlcad kintel (~kintel@unaffiliated/kintel) |
| 00:26.49 | Notify | 03GCI:Melange * 5604954702086144 Fix at least 8 spelling mistakes in at least 8 different files #2: Task due soon - There are less than 24 hours left until the deadline, please submit your work... |
| 01:31.58 | *** join/#brlcad ofnlut (~ofnlut_@c-68-48-58-20.hsd1.dc.comcast.net) |
| 01:31.58 | *** join/#brlcad ofnlut_ (~ofnlut_@c-68-48-58-20.hsd1.dc.comcast.net) |
| 01:36.43 | ofnlut | is there a mentor available? |
| 01:51.07 | andromeda-galaxy | does anyone know where I can find some documentation on the exact meanings of the terms shell, face, loop, etc. as used in NMG? |
| 01:54.31 | *** join/#brlcad andromedagalaxy (~andromeda@108-225-17-54.lightspeed.sntcca.sbcglobal.net) |
| 01:59.53 | starseeker | andromeda-galaxy: you might try www.scorec.rpi.edu/REPORTS/1986-1.pdf |
| 02:01.46 | andromeda-galaxy | starseeker: thanks! I'll take a look at it, though it seems to be taking a while to download... |
| 02:03.26 | starseeker | it's a thesis - 340 pages |
| 02:04.53 | andromeda-galaxy | ahh... it just loaded, does look useful |
| 02:06.12 | starseeker | figure 17 (pg 200 in the report, 218 in the pdf) may be helpful |
| 02:06.39 | starseeker | er - 17-8. |
| 02:06.43 | starseeker | couple others around there |
| 02:07.02 | Notify | 03GCI:Melange * 5230915127083008 Compile BRL-CAD with GCC trunk: Task due soon - There are less than 24 hours left until the deadline, please submit your work soon. |
| 02:07.14 | andromeda-galaxy | thanks! The definitions in chapter 10 also look useful.. |
| 02:10.08 | Notify | 03GCI:adityagulati * 5797874164039680 Create a book layout for Doc Camp Book #2: Ready for review - The work on this task is ready to be reviewed. |
| 02:43.53 | maths22 | ofnlut: Hello |
| 02:43.55 | maths22 | ~ask |
| 02:43.55 | infobot | Questions in the channel should be specific, informative, complete, concise, and on-topic. Don't ask if you can ask a question first. Don't ask if a person is there; just ask what you intended to ask them. Better questions more frequently yield better answers. We are all here voluntarily or against our will. |
| 02:44.11 | *** join/#brlcad YashM (75de1552@gateway/web/cgi-irc/kiwiirc.com/ip.117.222.21.82) |
| 02:44.43 | ofnlut | Hello I needed assistance with one of the task involving me to compile the program in Dev-C++ |
| 02:44.56 | maths22 | What was your difficulty? |
| 02:45.58 | ofnlut | theres no clear option in cmake that uses Dev-C++ I tried using MiwGW File Maker however i came across errors |
| 02:46.10 | maths22 | Looking at your log, I can see that. |
| 02:46.37 | Notify | 03GCI:brinlyt * 5230915127083008 Compile BRL-CAD with GCC trunk: Claim Removed - The claim on this task has been removed, someone else can claim it now. |
| 02:46.40 | maths22 | I'm not sure what's up with that; maybe some other mentor will know. |
| 02:46.47 | maths22 | reference: http://www.google-melange.com/gci/task/view/google/gci2014/6680593089691648 |
| 02:46.48 | ofnlut | Maybe I am using the wrong configuration? |
| 02:46.48 | gcibot | Compile BRL-CAD with Dev-C++ |
| 02:46.48 | gcibot | Status: NeedsWork (3 days, 1 hours left) |
| 02:46.48 | gcibot | Mentor(s): Jacob B, Harmanpreet |
| 02:47.13 | maths22 | I don't think so, but when I was a student participating last year, I tried this task, and I think I ran into a similar issue. |
| 02:47.38 | maths22 | I moved on to trying something else, so I never got it solved |
| 02:47.49 | ofnlut | ahh I see |
| 02:48.43 | ofnlut | this is the second task I have tried involving me compiling a program |
| 03:08.33 | Notify | 03GCI:Melange * 5670223239708672 Design a BRL-CAD splash screen #7: Task due soon - There are less than 24 hours left until the deadline, please submit your work soon. |
| 03:24.16 | Notify | 03GCI:Melange * 6399086370488320 Design a BRL-CAD Sticker #2: Task due soon - There are less than 24 hours left until the deadline, please submit your work soon. |
| 03:27.54 | *** join/#brlcad YashM (~YashM@117.222.23.42) |
| 03:32.47 | starseeker | kind of interesting - video to create a bearing in FreeCAD: https://www.youtube.com/watch?v=wWKzRr2Qw1o&feature=youtube_gdata |
| 03:44.20 | *** part/#brlcad YashM (~YashM@117.222.23.42) |
| 03:44.26 | *** join/#brlcad YashM (~YashM@117.222.23.42) |
| 04:37.55 | ignacio | Good night guys |
| 04:45.23 | YashM | gn |
| 04:53.46 | *** join/#brlcad Marctannous (bc1a92f6@gateway/web/freenode/ip.188.26.146.246) |
| 04:54.32 | Marctannous | mentors |
| 04:54.59 | Marctannous | anyone here? |
| 04:55.00 | Marctannous | https://www.google-melange.com/gci/task/view/google/gci2014/6375681818624000 |
| 04:55.01 | gcibot | Test New BRL-CAD Virtual Machine image |
| 04:55.01 | gcibot | Status: NeedsReview (3 days, 12 hours left) |
| 04:55.01 | gcibot | Mentor(s): Popescu Andrei, Ishwerdas |
| 05:17.45 | Notify | 03GCI:Melange * 6648047639461888 Design a BRL-CAD Sticker #10: Task due soon - There are less than 24 hours left until the deadline, please submit your work soon. |
| 05:23.16 | Notify | 03GCI:pulkit10mehta * 5899163250196480 Create a BRL-CAD presentation template #6: None - Sir, By mistake previous files were also compressed in the package. Kindly ignore the previous files. |
| 05:28.44 | Notify | 03GCI:Melange * 6353662997692416 Design a BRL-CAD splash screen #3: Task due soon - There are less than 24 hours left until the deadline, please submit your work soon. |
| 05:31.05 | Notify | 03GCI:Melange * 4931863265148928 Transcribe Geometry Model Data from a PDF report to an ASCII file: Task due soon - There are less than 24 hours left until the deadline, please submit your work... |
| 05:38.29 | *** join/#brlcad YashM_ (~YashM@59.88.182.188) |
| 05:40.23 | Notify | 03GCI:Melange * 6178630262587392 Design a banner for our Facebook page (and/or other social media sites) #6: Task due soon - There are less than 24 hours left until the deadline, please submit your... |
| 05:46.25 | Notify | 03GCI:Melange * 5853389636239360 Design a BRL-CAD Sticker #3: Task due soon - There are less than 24 hours left until the deadline, please submit your work soon. |
| 05:48.10 | Notify | 03GCI:Melange * 6068206720516096 Design a BRL-CAD business card #2: Task due soon - There are less than 24 hours left until the deadline, please submit your work soon. |
| 06:11.27 | *** join/#brlcad andrei_ (c35a6e7d@gateway/web/freenode/ip.195.90.110.125) |
| 06:12.42 | andrei_ | any mentor out here? |
| 06:14.04 | Stragus | It's 1am in their time zone, but ask away, they don't seem to get much sleep lately :) |
| 06:23.54 | Marctannous | andrei_ did you get a chance to look over my VM task? |
| 06:24.20 | andrei_ | nope :) |
| 06:24.27 | Marctannous | :( |
| 06:24.33 | Notify | 03GCI:popescuandrei * 6375681818624000 Test New BRL-CAD Virtual Machine image: Solutions! - Marc, the virtual machine guide cannot be merged with installing BRL-CAD guide for the reason that one... |
| 06:24.34 | Notify | 03GCI:popescuandrei * 6375681818624000 Test New BRL-CAD Virtual Machine image: Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this... |
| 06:24.59 | andrei_ | :) |
| 06:29.59 | andrei_ | Stragus, you got any task, how's it going? |
| 06:30.50 | andrei_ | also, not all mentors have the same timezone. For example, for me and mihaineacsu it's 8.30 AM :) |
| 06:32.21 | *** join/#brlcad darshpreets (~darshpree@202.164.53.117) |
| 06:32.28 | Stragus | Oh. :) I assumed most mentors were part of the standard crew in Maryland |
| 06:33.03 | Stragus | I'm not involved in the tasks, I only contributed some code over the years that is being used in BRL-CAD, I work on parallel projects |
| 06:33.32 | andrei_ | ah |
| 06:34.06 | andrei_ | ~seen d_rossberg |
| 06:34.07 | infobot | d_rossberg <~rossberg@66-118-151-70.static.sagonet.net> was last seen on IRC in channel #brlcad, 107d 15h 25m 12s ago, saying: 'or http://brlcad.org/wiki/Object-oriented_interfaces ?'. |
| 06:35.08 | YashM | nice |
| 06:36.01 | Notify | 03GCI:popescuandrei * 4861494520971264 Design a T-Shirt for BRL-CAD #10: Nice work! - Hey, Jude! Can you please upload a pdf version of t-shirt final as well? Aside of that, it looks nice! Good... |
| 06:36.36 | Notify | 03GCI:tannousmarc * 6375681818624000 Test New BRL-CAD Virtual Machine image: Even more solutions! - 1) Regarding the two terminals, at first I thought that's how it's supposed to happen, but... |
| 06:40.47 | Notify | 03GCI:moret * 5323479725375488 Identify and eliminate dead code (100+ lines) #7: Task Claimed - I would like to work on this task. |
| 06:47.38 | Notify | 03GCI:popescuandrei * 5307330648342528 Design a BRL-CAD Sticker #5 http://www.google-melange.com/gci/task/view/google/gci2014/5307330648342528: Suggestions Hey, Krassen! You've been doing... |
| 06:47.39 | Notify | 03GCI:popescuandrei * 5307330648342528 Design a BRL-CAD Sticker #5: Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to... |
| 06:48.53 | Notify | 03GCI:popescuandrei * 5307330648342528 Design a BRL-CAD Sticker #5: time - I forgot to mention, don't worry about the task time running out, if you can't manage to do it in the remaining time, I... |
| 06:51.39 | Notify | 03GCI:popescuandrei * 4949440150372352 Design a BRL-CAD splash screen #4: jpg or pdf - Hello, Andrew! Can you please upload a jpg or pdf version of your work? Not everyone can open psd and it's... |
| 06:51.44 | Notify | 03GCI:popescuandrei * 4949440150372352 Design a BRL-CAD splash screen #4: Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task... |
| 06:52.49 | Notify | 03GCI:brlcad * 5516399187329024 Design a BRL-CAD splash screen #8: Task Closed - Congratulations, this task has been completed successfully. |
| 06:53.34 | Notify | 03GCI:popescuandrei * 5323479725375488 Identify and eliminate dead code (100+ lines) #7: Task Assigned - This task has been assigned to Moretti Georgiev. You have 100 hours to complete this task,... |
| 06:53.44 | Notify | 03GCI:brlcad * 5516399187329024 Design a BRL-CAD splash screen #8: better! - Ivan, that's looking a lot better. Looks like something we might even be able to use in a future version of BRL-CAD.... |
| 06:58.35 | Notify | 03GCI:tannousmarc * 6375681818624000 Test New BRL-CAD Virtual Machine image: Ready for review - The work on this task is ready to be reviewed. |
| 06:59.10 | Notify | 03GCI:brlcad * 5265491291537408 Design new API function to reduce duplication: Task Closed - Congratulations, this task has been completed successfully. |
| 07:00.40 | Marctannous | brlcad: are you here? |
| 07:01.20 | andrei_ | brlcad: if you can, have a look at Marc's task, it looks OK to me, considering there weren't any actual issues. |
| 07:04.43 | Notify | 03GCI:brlcad * 5265491291537408 Design new API function to reduce duplication: excellent analysis - Andromeda, thanks for providing a detailed rationale write-up that explains the two choices. My... |
| 07:15.31 | Notify | 03GCI:popescuandrei * 6375681818624000 Test New BRL-CAD Virtual Machine image: None - Is the 2.pdf file the second page or the second version? If it's the second page, merge them into a single... |
| 07:15.32 | Notify | 03GCI:popescuandrei * 6375681818624000 Test New BRL-CAD Virtual Machine image: Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this... |
| 07:20.08 | ofnlut | brlcad are you available? |
| 07:20.47 | Notify | 03GCI:popescuandrei * 6375681818624000 Test New BRL-CAD Virtual Machine image: Task Closed - Congratulations, this task has been completed successfully. |
| 07:20.52 | Notify | 03GCI:tannousmarc * 6375681818624000 Test New BRL-CAD Virtual Machine image: Ready for review - The work on this task is ready to be reviewed. |
| 07:21.13 | andrei_ | ofnlut: do you need to speak specifically to brlcad, or do you need help with something? |
| 07:21.56 | ofnlut | yes I need help with one of the task about compiling the program in Dev-C++ |
| 07:23.25 | andrei_ | then ask away |
| 07:23.27 | andrei_ | perhaps I can help |
| 07:23.41 | andrei_ | (or any other mentors) |
| 07:23.56 | Stragus | (or any other non-mentor too :) ) |
| 07:24.10 | andrei_ | ^ |
| 07:24.39 | ofnlut | theres no clear option in cmake that uses Dev-C++ I tried using MiwGW File Maker however i came across errors |
| 07:24.55 | ofnlut | so am i using the wrong configuration? |
| 07:25.03 | Stragus | Dev-C++ is really just an IDE around mingw32 |
| 07:26.24 | andrei_ | what errors did you come across? do you have an error log? |
| 07:26.52 | ofnlut | yes i can pull up a pastebin |
| 07:27.06 | andrei_ | try something permanent, like a text file uploaded to melange |
| 07:28.50 | ofnlut | oh i did upload a log to melange in the task page |
| 07:29.02 | andrei_ | alright, let me look |
| 07:32.40 | andrei_ | Stragus: do you usually build brlcad on windows? |
| 07:33.22 | andrei_ | I've previously reviewed ofnlut's task and I was the one who asked him do join IRC |
| 07:33.30 | andrei_ | but I don t use windows, I don't know what to make of those errors |
| 07:33.54 | ofnlut | no this is my first time |
| 07:34.52 | andrei_ | what do you mean? |
| 07:34.55 | Stragus | I don't use Windows either, never tried to build BRL-CAD there, but I have experience with mingw32 and mingw64 |
| 07:35.45 | andrei_ | gcc.exe: error: unrecognized command line option '-Qunused-arguments' |
| 07:36.17 | andrei_ | mingw32/bin/ld.exe: cannot find -lc collect2.exe: error: ld returned 1 exit status |
| 07:36.20 | andrei_ | these seem to be the issues |
| 07:36.50 | Stragus | Uh... That's not a GCC flag |
| 07:36.59 | Stragus | It's a Clang flag too, apparently, or so says Google |
| 07:37.19 | Stragus | Apparently, it's trying to target the wrong compiler |
| 07:37.24 | Notify | 03GCI:nikhilojha271119991 * 5781103189164032 Create a BRL-CAD presentation template #8: Claim Removed - The claim on this task has been removed, someone else can claim it now. |
| 07:37.29 | andrei_ | CheckIncludeFiles.c:2:19: fatal error: regex.h: No such file or directory compilation terminate |
| 07:38.18 | Stragus | regex isn't a standard library on Windows, it will have to be installed if required |
| 07:41.58 | ofnlut | so is that the source of my issue? |
| 07:42.38 | andrei_ | it might be |
| 07:42.46 | andrei_ | let me figure out how to install it |
| 07:43.12 | Stragus | If it's trying to pass Clang options to GCC (including mingw32 and Dev-C++), that's certainly an issue |
| 07:45.01 | andrei_ | yeah, but if the regex error dissapears, we can see if that's what breaks the build or not |
| 07:46.18 | *** join/#brlcad luca79 (~luca@net-37-116-118-116.cust.vodafonedsl.it) |
| 07:46.51 | andrei_ | ofnlut: can you search for regex.h on your system, to see if it exists? |
| 07:47.55 | Notify | 03GCI:gjeet * 4949440150372352 Design a BRL-CAD splash screen #4 http://www.google-melange.com/gci/task/view/google/gci2014/4949440150372352: Thoughts on your design Hey Andrew, you can do the... |
| 07:47.59 | Stragus | I can confirm mingw32 doesn't come with regex.h, the same is probably true for Dev-C++ |
| 07:49.24 | ofnlut | yes it exist in cygwin64 folder |
| 07:49.32 | ofnlut | in my* |
| 07:51.03 | Notify | 03GCI:Melange * 5609694466932736 Design a BRL-CAD splash screen #5: Task due soon - There are less than 24 hours left until the deadline, please submit your work soon. |
| 07:51.34 | andrei_ | hm |
| 07:51.42 | andrei_ | Determining if files regex.h exist failed with the following output: Change Dir: E:/Users/Devin/Documents/brlcad-7.24.2/build/CMakeFiles/CMakeTmp |
| 07:52.14 | andrei_ | it fails to find pthread.h and regex.h |
| 07:52.25 | ofnlut | so maybe it does not work because it is not looking in cygwin64? |
| 07:53.26 | Stragus | cygwin64 is completely different from mingw32 |
| 07:53.49 | Stragus | Mingw32 is just GCC for Windows. Cygwin64 is a complete Unix emulation layer for Windows, of course it will have regex |
| 07:53.59 | andrei_ | there's no way pthread can be in mingw |
| 07:54.00 | andrei_ | yeah |
| 07:54.31 | andrei_ | ofnlut: mark your task ready for review |
| 07:54.37 | andrei_ | someone has to have a better look at it |
| 07:54.58 | andrei_ | I'll add a comment to it |
| 07:55.13 | Notify | 03GCI:alonzo_ * 6680593089691648 Compile BRL-CAD with Dev-C++: Ready for review - The work on this task is ready to be reviewed. |
| 07:56.15 | *** join/#brlcad ishwerdas (75dcad6d@gateway/web/cgi-irc/kiwiirc.com/ip.117.220.173.109) |
| 07:57.58 | Notify | 03GCI:popescuandrei * 6680593089691648 Compile BRL-CAD with Dev-C++: None - the build seems to fail to find regex.h and pthread.h in cygwin folder although it exist. Also, mingw receives Clang... |
| 07:59.33 | Stragus | I think the point was compiling with Dev-C++/mingw32, not Cygwin |
| 07:59.48 | Stragus | Cygwin is pretty much guaranteed to work, it features complete Unix emulation |
| 08:00.00 | andrei_ | well yeah, but he mentioned using the mingw make |
| 08:17.41 | *** join/#brlcad blessing (~blessing@41.205.22.3) |
| 08:53.24 | Notify | 03GCI:rossberg * 6680593089691648 Compile BRL-CAD with Dev-C++ http://www.google-melange.com/gci/task/view/google/gci2014/6680593089691648: Please retry with current developer version CMake... |
| 08:53.34 | Notify | 03GCI:rossberg * 6680593089691648 Compile BRL-CAD with Dev-C++: Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to... |
| 08:58.30 | andrei_ | ofnlut: if you need help getting the latest revision, ask away :) |
| 09:00.48 | Notify | 03GCI:mirco_wave * 5609694466932736 Design a BRL-CAD splash screen #5: Ready for review - The work on this task is ready to be reviewed. |
| 09:03.05 | *** join/#brlcad ries (~ries@D979C47E.cm-3-2d.dynamic.ziggo.nl) |
| 09:03.42 | brlcad | GCI students: andromeda-galaxy: Marctannous: others: a bunch of new tasks were just uploaded (~70), so check 'em out! even more on the way. |
| 09:04.10 | brlcad | ~ask |
| 09:04.11 | infobot | Questions in the channel should be specific, informative, complete, concise, and on-topic. Don't ask if you can ask a question first. Don't ask if a person is there; just ask what you intended to ask them. Better questions more frequently yield better answers. We are all here voluntarily or against our will. |
| 09:06.36 | ofnlut | andrei: how do i use the command exactly with tortoisesvn? |
| 09:06.55 | andrei_ | http://tortoisesvn.net/docs/release/TortoiseSVN_en/tsvn-dug-checkout.html |
| 09:08.08 | andrei_ | using the link found on the wiki |
| 09:10.41 | ofnlut | the url is not valid so should I use the https://svn.code.sourceforge.net/p/brlcad/code/<module>/trunk <module> portion? |
| 09:12.20 | brlcad | ~cadsvn |
| 09:12.20 | infobot | To obtain BRL-CAD from Subversion: svn checkout https://svn.code.sourceforge.net/p/brlcad/code/brlcad/trunk brlcad |
| 09:12.38 | ofnlut | thank you |
| 09:12.39 | andrei_ | oh, new tricks :)) |
| 09:18.54 | *** join/#brlcad blessing (~blessing@41.205.22.3) |
| 09:20.44 | Notify | 03GCI:helix * 6408871916601344 Design a BRL-CAD Sticker #13: Task Claimed - I would like to work on this task. |
| 09:23.15 | ofnlut | andrei_:I ran CMake again using the same settings and it still returned errors |
| 09:24.11 | Notify | 03GCI:ch3ck * 6408871916601344 Design a BRL-CAD Sticker #13: Task Assigned - This task has been assigned to Yash. You have 100 hours to complete this task, good luck! |
| 09:27.49 | Notify | 03GCI:popescuandrei * 4861494520971264 Design a T-Shirt for BRL-CAD #10: Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task... |
| 09:28.03 | andrei_ | ofnlut: can you upload the same logs again ? |
| 09:28.08 | ofnlut | will do |
| 09:28.37 | ofnlut | I named the new ones as developer |
| 09:28.39 | *** join/#brlcad mihaineacsu (~mihaineac@95.76.156.247) |
| 09:28.44 | Notify | 03GCI:alonzo_ * 6680593089691648 Compile BRL-CAD with Dev-C++: Ready for review - The work on this task is ready to be reviewed. |
| 09:35.49 | Notify | 03GCI:ekamjot01 * 5235927756570624 Design a BRL-CAD Sticker #12: Task Claimed - I would like to work on this task. |
| 09:37.31 | Notify | 03GCI:mihaineacsu29 * 5609694466932736 Design a BRL-CAD splash screen #5: None - That looks great! On the right side you have some gray layers that overlap each other. Can you add another version... |
| 09:37.36 | Notify | 03GCI:mihaineacsu29 * 5609694466932736 Design a BRL-CAD splash screen #5: Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task... |
| 09:37.46 | Notify | 03GCI:rossberg * 5235927756570624 Design a BRL-CAD Sticker #12: Task Reopened - This task has been Reopened. |
| 09:41.49 | Notify | 03GCI:ekamjot01 * 5235927756570624 Design a BRL-CAD Sticker #12: Task Claimed - I would like to work on this task. |
| 09:42.46 | Notify | 03GCI:ch3ck * 5235927756570624 Design a BRL-CAD Sticker #12: Task Assigned - This task has been assigned to Ekamjot Singh. You have 100 hours to complete this task, good luck! |
| 09:45.50 | *** join/#brlcad ishwerdas (75dcad6d@gateway/web/cgi-irc/kiwiirc.com/ip.117.220.173.109) |
| 09:49.24 | Notify | 03GCI:andrei23 * 4949440150372352 Design a BRL-CAD splash screen #4: None - I will try to do a better work but i need another 2 days more to do that, thank you for the suggestions and i promise... |
| 09:50.00 | Notify | 03GCI:samarpita * 5564670123442176 Fix at least 8 spelling mistakes in at least 8 different files #3: None - sir, I am thinking to claim this task . Can I have 1 or 2 examples? actually I didn't... |
| 09:52.42 | Notify | 03GCI:rossberg * 6680593089691648 Compile BRL-CAD with Dev-C++: Task Closed - Congratulations, this task has been completed successfully. |
| 09:56.09 | Notify | 03GCI:rossberg * 6680593089691648 Compile BRL-CAD with Dev-C++: Follow-on task: Fix a configuration error - Will be there soon. |
| 10:04.48 | Notify | 03GCI:helix * 6408871916601344 Design a BRL-CAD Sticker #13: Ready for review - The work on this task is ready to be reviewed. |
| 10:05.28 | Notify | 03GCI:sakshamarora7313 * 5231299258220544 Model a toy tank in 3D using BRL-CAD: Claim Removed - The claim on this task has been removed, someone else can claim it now. |
| 10:08.13 | Notify | 03GCI:ch3ck * 6408871916601344 Design a BRL-CAD Sticker #13: Perfect! - Very nice and daring design. Like it :) |
| 10:09.12 | YashM | Ch3ck, I am uploading the PSD sec |
| 10:13.14 | Notify | 03GCI:ch3ck * 6408871916601344 Design a BRL-CAD Sticker #13: Task Closed - Congratulations, this task has been completed successfully. |
| 10:15.28 | YashM | Can I claim more than one similar tasks |
| 10:15.35 | YashM | with different submissions? |
| 10:17.45 | Notify | 03GCI:adityagulati * 5797874164039680 Create a book layout for Doc Camp Book #2: New Files - Sir, I have compressed the files to make an rar file named book layout.rar. And the psd of all the... |
| 10:26.13 | YashM | the new website is screwed up |
| 10:35.40 | *** join/#brlcad deepak (~chatzilla@117.199.101.247) |
| 10:37.59 | *** join/#brlcad ries (~ries@D979C47E.cm-3-2d.dynamic.ziggo.nl) |
| 10:41.11 | *** join/#brlcad MarcTannousPhone (~androirc@109.166.128.57) |
| 10:41.26 | MarcTannousPhone | Brlcad: please tell me you are here |
| 10:41.48 | MarcTannousPhone | I really was happy when I saw that you introduced web design tasks |
| 10:42.05 | MarcTannousPhone | But I cannot claim them as I have already completed my 2 beginenr tasks |
| 10:42.55 | YashM | theres another web design task |
| 10:43.03 | YashM | which is not beginner |
| 10:43.07 | MarcTannousPhone | These are responsive landing pages we are talking about, I consider this harder than designing a sticker, do you consider thkse beginner tasks? |
| 10:43.22 | MarcTannousPhone | Yes but it's regarding an icon set which is way less challenging |
| 10:43.50 | MarcTannousPhone | ... |
| 10:43.54 | YashM | no |
| 10:43.55 | YashM | this |
| 10:43.56 | YashM | http://www.google-melange.com/gci/task/view/google/gci2014/5303979902763008 |
| 10:43.56 | gcibot | Design a web page that overviews the BRL-CAD contributors #3 |
| 10:43.57 | gcibot | Status: Open |
| 10:43.57 | gcibot | Mentor(s): Isaac Kamga, Harmanpreet |
| 10:44.11 | MarcTannousPhone | This one is way easier |
| 10:44.17 | MarcTannousPhone | Than the frontpage |
| 10:44.19 | andrei_ | MarcTannousPhone, can you give me a link? |
| 10:44.22 | MarcTannousPhone | That is my concern |
| 10:44.37 | MarcTannousPhone | http://www.google-melange.com/gci/task/view/google/gci2014/5309919842533376 |
| 10:44.37 | gcibot | Design a website icon set for brlcad.org #2 |
| 10:44.37 | gcibot | Status: Open |
| 10:44.37 | gcibot | Mentor(s): Deepak, Gauravjeet Singh |
| 10:44.41 | MarcTannousPhone | Oh no |
| 10:44.43 | MarcTannousPhone | Not that one |
| 10:44.44 | MarcTannousPhone | Sec |
| 10:45.02 | MarcTannousPhone | http://www.google-melange.com/gci/task/view/google/gci2014/5517402733281280 |
| 10:45.03 | gcibot | Design a new website landing page for BRL-CAD #10 |
| 10:45.03 | gcibot | Status: Open |
| 10:45.03 | gcibot | Mentor(s): Mandeep Kaur, Sean |
| 10:45.24 | MarcTannousPhone | This is by far the most challenging task this far, I really consider the beginner tag inappropriate |
| 10:45.33 | YashM | its not a beginner task, yeah |
| 10:46.10 | MarcTannousPhone | And I cannot claim it because my 2 beginner tasks are done |
| 10:46.55 | andrei_ | Marc, relax, if what you say is justified |
| 10:46.59 | andrei_ | I l remove the beginner tag |
| 10:47.06 | andrei_ | I ll* |
| 10:47.17 | MarcTannousPhone | Thank you |
| 10:48.03 | andrei_ | there are 10 of them, it's more than fair that you are able to work on one of them |
| 10:48.12 | andrei_ | Alright, I ll remove the beginner tag |
| 10:48.29 | andrei_ | and I ll discuss with brlcad if they should all be removed |
| 10:48.34 | andrei_ | (to be fair to others) |
| 10:48.37 | MarcTannousPhone | Thabk you |
| 10:48.44 | MarcTannousPhone | Will deliver a spectacular design |
| 10:49.00 | YashM | andrei_, Can I claim more than one similar tasks |
| 10:49.00 | YashM | with different submissions? |
| 10:49.23 | andrei_ | YashM, I wouldn't advice it, but, technically, yeah... |
| 10:49.33 | Notify | 03GCI:tannousmarc * 5517402733281280 Design a new website landing page for BRL-CAD #10: Task Claimed - I would like to work on this task. |
| 10:49.42 | andrei_ | is there a reason for which you wish to do so? |
| 10:49.58 | YashM | its open and i can do it |
| 10:50.11 | YashM | but have done it before |
| 10:50.29 | YashM | not a specific reason though |
| 10:50.31 | andrei_ | what task? |
| 10:50.39 | YashM | the sticker one |
| 10:50.49 | andrei_ | if it's "reduce duplicated code" for example |
| 10:50.57 | andrei_ | I consider it perfectly ok to do so |
| 10:51.00 | andrei_ | ah |
| 10:51.13 | andrei_ | so, there's no other task that interrests you? |
| 10:51.23 | YashM | there is |
| 10:51.24 | YashM | :P |
| 10:51.27 | YashM | but just asking |
| 10:51.29 | Notify | 03GCI:ch3ck * 5517402733281280 Design a new website landing page for BRL-CAD #10: Task Assigned - This task has been assigned to Marc Tannous. You have 96 hours to complete this task, good luck! |
| 10:51.56 | andrei_ | you can do it, of course |
| 10:52.16 | andrei_ | but the number of tasks, in an absolute way of speaking is not that relevant |
| 10:52.51 | andrei_ | it's way more important to see that you've progress and learned than to see you ve done the most tasks, while all tasks being essentially in the same spectrum |
| 10:53.05 | andrei_ | it s not forbbiden to do similar tasks, either |
| 10:53.09 | andrei_ | just do as you see fit :) |
| 10:53.21 | YashM | ok :) |
| 10:53.59 | Notify | 03GCI:helix * 5237391803547648 Create a BRL-CAD style guide / cheat sheet #5: Task Claimed - I would like to work on this task. |
| 10:55.25 | Notify | 03GCI:popescuandrei * 5237391803547648 Create a BRL-CAD style guide / cheat sheet #5: Task Assigned - This task has been assigned to Yash. You have 100 hours to complete this task, good luck! |
| 10:55.28 | YashM | Also, how do i open a .lib file? sorry for the stupid ques |
| 10:57.51 | andrei_ | ~question |
| 10:57.51 | infobot | rumour has it, question is If you have a question and want people to give useful answers, make sure you have read this first: http://www.catb.org/~esr/faqs/smart-questions.html |
| 10:57.58 | andrei_ | oops |
| 10:58.04 | andrei_ | not what I wanted |
| 10:58.14 | andrei_ | YashM, there are absolutely no stupid questions |
| 10:58.28 | andrei_ | ask anything you need/want to know |
| 10:58.38 | andrei_ | I don t think you can open a lib file |
| 10:58.45 | andrei_ | as it might be a binary, let me look |
| 11:26.01 | Notify | 03GCI:shashank1245 * 5309919842533376 Design a website icon set for brlcad.org #2: Query - The first two sites are not working.Please check for solution. |
| 11:27.21 | Notify | 03GCI:otamegami * 5604954702086144 Fix at least 8 spelling mistakes in at least 8 different files #2: Claim Removed - The claim on this task has been removed, someone else can claim it now. |
| 11:28.21 | Notify | 03GCI:popescuandrei * 5309919842533376 Design a website icon set for brlcad.org #2 http://www.google-melange.com/gci/task/view/google/gci2014/5309919842533376: None Hello! both... |
| 11:29.22 | *** join/#brlcad mihaineacsu (~mihaineac@95.76.156.247) |
| 11:31.47 | Notify | 03GCI:gjeet * 4949440150372352 Design a BRL-CAD splash screen #4: Deadline extended - The deadline of the task has been extended with 1 days and 16 hours. |
| 11:35.56 | *** join/#brlcad teepee- (bc5c2133@gateway/web/freenode/ip.188.92.33.51) |
| 11:37.49 | Notify | 03BRL-CAD Wiki:Enriuealcalde * 0 /wiki/User:Enriuealcalde: |
| 11:38.40 | ``Erik | the torrent of activity during gci, sheesh, spend half my time trying to read backlog just to get my bearings in this maelstrom :) |
| 11:38.58 | ``Erik | last time I tried, BRL-CAD and cygwin don't mix |
| 11:39.54 | ``Erik | even doing it in the shell, there were some very weird deep issues with tcl that made it a non-starter |
| 11:39.55 | andrei_ | ``Erik, daniel closed that task, the point was to find out what breaks, not to actually build |
| 11:40.04 | ``Erik | :) |
| 11:41.26 | ``Erik | I thought there was a dev-c++ generator for cmake, but it looks like I was wrong O.o second hit on "cmake dev-c++ generator" is a BRL-CAD gci task |
| 11:41.41 | andrei_ | haha, we're famous :) |
| 11:42.00 | andrei_ | maybe we should make a gci task to write one ? :p |
| 11:42.47 | ``Erik | a dec-c++ cmake generator is a lot more than a gci task, more like a gsoc task... for the cmake project.... :) |
| 11:42.51 | ``Erik | s/c/v/ |
| 11:43.21 | andrei_ | I suspected so |
| 11:43.27 | andrei_ | but was joking |
| 11:44.04 | ``Erik | it's a good idea that we'd benefit from, just not our task to own :) |
| 11:44.56 | Notify | 03GCI:rohit_agarwal * 5781103189164032 Create a BRL-CAD presentation template #8: Task Claimed - I would like to work on this task. |
| 11:46.02 | Notify | 03GCI:deepakkumarsharma * 5781103189164032 Create a BRL-CAD presentation template #8: Task Assigned - This task has been assigned to Rohit Agarwal. You have 100 hours to complete this task, good... |
| 11:47.01 | deepak | Is someone working on brlcad new website. AFAIK few days before I looked into it, it seems good but now everything messed up. Please check http://beta.brlcad.org/wp/. Is problem really exists or I'm the only one facing this. |
| 11:47.17 | Notify | 03GCI:ekansh_mahendru * 5833974572122112 Design a BRL-CAD Sticker #15: Task Claimed - I would like to work on this task. |
| 11:48.17 | Notify | 03GCI:deepakkumarsharma * 5833974572122112 Design a BRL-CAD Sticker #15: Task Assigned - This task has been assigned to Ekansh. You have 100 hours to complete this task, good luck! |
| 11:48.18 | mihaineacsu | deepak: looks good on my side; |
| 11:48.33 | ``Erik | what do you mean by "messed up"? |
| 11:48.34 | mihaineacsu | what seems to be out of place? |
| 11:49.32 | deepak | http://awesomescreenshot.com/0dd3z5d8b6. Everything aligned to left side and no image displaying. |
| 11:51.11 | andrei_ | ``Erik: is there actually anyone who uses Dev-C++ ? |
| 11:51.17 | andrei_ | <PROTECTED> |
| 11:51.17 | ``Erik | that's what it looks like for me, deepak |
| 11:51.26 | mihaineacsu | deepak: images are missing here as well |
| 11:52.00 | mihaineacsu | I thought it was my slow internet, I'm in a public place |
| 11:52.07 | ``Erik | andrei_: for BRL-CAD? no... msvc is the supported tool for making a windows package |
| 11:54.36 | deepak | It looks good few days before if I'm not wrong. Everything seems perfect I can see images too plus over effect on images. Any idea who is working on this website presently? |
| 11:54.53 | deepak | s / hover / over |
| 11:55.58 | ``Erik | deepak: I think maths22? |
| 11:57.58 | ishwerdas | deepak: I guess we had maths22 managing everything and recently there was a pull request from sofat |
| 11:58.52 | Notify | 03GCI:mirco_wave * 5609694466932736 Design a BRL-CAD splash screen #5: None - Sure thing! |
| 11:58.53 | ishwerdas | I am also working a bit, but due to other commitments haven't been able to commit something |
| 11:59.44 | ishwerdas | Also it's a work in progress so you can expect it to be broken at times :P |
| 11:59.59 | ishwerdas | if you have time, you can really help us there :) |
| 12:01.28 | Notify | 03GCI:mirco_wave * 5609694466932736 Design a BRL-CAD splash screen #5: Ready for review - The work on this task is ready to be reviewed. |
| 12:01.56 | deepak | Ah! I love to help you guys. I'm not familiar that work is in progress. |
| 12:02.11 | ishwerdas | Just checked again, it's sofat's pull request that's applied |
| 12:02.54 | ishwerdas | has caused this effect |
| 12:03.22 | ishwerdas | what images are you talking about ? |
| 12:03.52 | deepak | I think problem is in PR. Can you move one head back and check if error still exist. As I'm on the way to clone it. |
| 12:05.56 | deepak | Images that are on the alternative sides of landing page. |
| 12:06.03 | ishwerdas | I am sure it's in PR, i have cloned it before the PR was applied and problem wasn't there (regarding squashed logo and everything on left) |
| 12:06.14 | ishwerdas | that images were never there on wp theme |
| 12:06.21 | ishwerdas | they were on cpp-tricks.com/brlcad |
| 12:06.27 | ishwerdas | a mockup i made a year ago :( |
| 12:07.57 | deepak | Please check this : http://beta.brlcad.org/wp/ |
| 12:08.55 | ishwerdas | what to check for ? |
| 12:10.00 | Notify | 03GCI:mihaineacsu29 * 5609694466932736 Design a BRL-CAD splash screen #5: None - Fantastic! Good work! |
| 12:10.15 | Notify | 03GCI:mihaineacsu29 * 5609694466932736 Design a BRL-CAD splash screen #5: Task Closed - Congratulations, this task has been completed successfully. |
| 12:10.15 | ishwerdas | I think instead of copying the whole web root in git repo we should just have a repo for wiki theme and wp theme. maths22, what do you think ? |
| 12:10.47 | ishwerdas | #brlcad-gcimentors |
| 12:11.11 | ishwerdas | oops |
| 12:11.27 | andrei_ | haha |
| 12:12.06 | YashM | the beta website is screwed up or is it me |
| 12:12.24 | mihaineacsu | :) |
| 12:12.26 | ishwerdas | aah! YashM yes it's pretty screwed up |
| 12:12.34 | ishwerdas | but we are working on it |
| 12:12.47 | YashM | okay :) |
| 12:13.04 | ishwerdas | How are your tasks going on ? |
| 12:13.48 | YashM | I am making a cheat sheet currently |
| 12:15.15 | ishwerdas | great :) |
| 12:26.01 | *** join/#brlcad ishwerdas (75dcad6d@gateway/web/cgi-irc/kiwiirc.com/ip.117.220.173.109) |
| 12:46.30 | *** join/#brlcad mihaineacsu (~mihaineac@95.76.156.247) |
| 12:46.48 | *** join/#brlcad MarcTannousPhone (~androirc@109.166.135.61) |
| 12:52.40 | Notify | 03GCI:programmingluko * 5254428328198144 Design a website icon set for brlcad.org #3: Task Claimed - I would like to work on this task. |
| 12:57.56 | Notify | 03GCI:mihaineacsu29 * 5254428328198144 Design a website icon set for brlcad.org #3: Task Assigned - This task has been assigned to ProgrammingLuko. You have 100 hours to complete this task, good... |
| 12:59.10 | *** join/#brlcad ries (~ries@D979C47E.cm-3-2d.dynamic.ziggo.nl) |
| 13:01.57 | Marctannous | @any mentor |
| 13:02.25 | andrei_ | ? |
| 13:02.41 | Marctannous | does the new website in the task have to have a login form? |
| 13:02.51 | Marctannous | that's not javascript html & css and |
| 13:03.01 | Marctannous | not really design-related |
| 13:03.19 | Marctannous | also don't know what to log in to |
| 13:04.28 | mihaineacsu | Marctannous: care to share the link to the task? |
| 13:04.42 | Marctannous | http://www.google-melange.com/gci/task/view/google/gci2014/5517402733281280 |
| 13:04.43 | gcibot | Design a new website landing page for BRL-CAD #10 |
| 13:04.43 | gcibot | Status: Claimed (3 days, 21 hours left) |
| 13:04.43 | gcibot | Mentor(s): Sean, Popescu Andrei, Mihai Neacsu, Mandeep Kaur |
| 13:06.43 | mihaineacsu | Marctannous: for the moment, focus on design, the login form doesn't have to work; |
| 13:06.56 | Marctannous | but is it necessary in the layout? |
| 13:07.07 | Marctannous | out of the two examples provided, none of them work |
| 13:07.17 | Marctannous | wanted to know what the intended feature is with the login |
| 13:07.51 | andrei_ | http://beta.brlcad.org/wp/ |
| 13:07.52 | andrei_ | this one works |
| 13:08.12 | Marctannous | it redirects to a wordpress login |
| 13:08.45 | Marctannous | http://beta.brlcad.org/wp/wp-login.php? |
| 13:09.21 | andrei_ | also, since you enjoy web design so much, you could try to do one with login layout, that can be removed later on :) |
| 13:09.33 | andrei_ | tho I doubt it will be |
| 13:09.50 | ishwerdas | Marctannous: it would be better if you remove that login form |
| 13:10.20 | ishwerdas | we earlier discussed and we concluded that we want to give that space to something else |
| 13:10.27 | ishwerdas | making log-in form not so prominent |
| 13:10.31 | ishwerdas | in design |
| 13:10.37 | andrei_ | alright, there's your answer, then |
| 13:13.15 | ankesh11 | There was an AMA by Carl Bass, the CEO of Autodesk yesterday http://www.reddit.com/r/IAmA/comments/2oaei2/carl_bass_here_ceo_of_autodesk_designer/ |
| 13:13.41 | Marctannous | I've read it |
| 13:13.51 | Marctannous | ishwerds: thanks, did not know the purpose of the login form |
| 13:14.47 | ankesh11 | BRL-CAD got mentioned a couple of times. |
| 13:15.27 | mihaineacsu | cool! |
| 13:16.03 | Marctannous | it was advertised by users as an open source,free and available on multiple platforms program |
| 13:16.17 | Marctannous | mostly when people were asking bout autodesk's very very high price on software |
| 13:16.18 | ankesh11 | Yeah. |
| 13:16.36 | ankesh11 | One of the comments that struck me though was: "Are there actual brlcad users? When open source cad gets mentioned, people bring it up but have never used it." |
| 13:17.19 | ankesh11 | Really hope we can reduce the traction involved in working with BRL-CAD. |
| 13:18.02 | *** join/#brlcad teepee- (bc5c2133@gateway/web/freenode/ip.188.92.33.51) |
| 13:18.03 | Marctannous | that's because the learning curve of the program seems too steep |
| 13:18.35 | ankesh11 | Having a revamped website to attract new developers should definitely help. |
| 13:18.36 | ishwerdas | oh! that brings to me another gci task idea :) |
| 13:18.51 | YashM | advertise? |
| 13:18.53 | ishwerdas | agrees with ankesh11 |
| 13:18.56 | Marctannous | some cooly-designed tutorials would help |
| 13:19.09 | Marctannous | don't worry, the website is on its way |
| 13:19.11 | Marctannous | :D |
| 13:19.46 | YashM | a website, a better GUI and some youtube tutorials and we're set |
| 13:20.31 | ankesh11 | Marctannous: Right, maths22 and ishwerdas have designed a prototype that looks pretty good. |
| 13:20.51 | Marctannous | I really liked one of them |
| 13:20.55 | Marctannous | don't know whose it was tho |
| 13:21.00 | ishwerdas | YashM, exactly! |
| 13:21.11 | Marctannous | but but |
| 13:21.24 | Marctannous | http://www.google-melange.com/gci/task/view/google/gci2014/5290439682818048 |
| 13:21.25 | gcibot | Design a prototype CAD GUI layout #2 |
| 13:21.25 | gcibot | Status: Closed |
| 13:21.25 | gcibot | Mentor(s): Jacob B, Hardeep Singh Rai |
| 13:21.29 | Marctannous | a BETTER gui? :( |
| 13:22.40 | YashM | Marctannous, it's great |
| 13:23.07 | ankesh11 | Marctannous: The mockup looks great. |
| 13:23.10 | YashM | I think the icons are too big though |
| 13:23.22 | Marctannous | I explained it somewhere in that huge comment on the task |
| 13:23.41 | *** join/#brlcad deepak (~chatzilla@117.212.52.136) |
| 13:23.41 | Marctannous | Archer's current UI really has a lot of white space. White space is generally good in design, but the toolbar left more than half of the screen unused |
| 13:23.44 | ishwerdas | anyone with any skill in Qt design creator ? |
| 13:23.51 | ishwerdas | sry Qt designer ? |
| 13:24.04 | Marctannous | give me a link |
| 13:24.10 | Marctannous | to QT designer |
| 13:24.32 | ishwerdas | http://qt-project.org/doc/qt-4.8/designer-manual.html |
| 13:24.39 | ishwerdas | it's pretty easy to learn |
| 13:25.00 | ishwerdas | if you are interested, at-least we can generate .ui files in Qt. |
| 13:25.02 | YashM | oh WYSIWYG we meet again |
| 13:25.12 | Notify | 03GCI:codingcow_boy * 5056785140416512 Compile BRL-CAD using Microsoft Visual Studio Community Edition: Ready for review - The work on this task is ready to be reviewed. |
| 13:25.16 | Marctannous | not WYSIWYG editors please :( |
| 13:26.18 | *** join/#brlcad Vijfhoek (quassel@46.249.37.134) |
| 13:26.31 | ishwerdas | By Qt designer I meant if we can create the .ui files for current gui mockups |
| 13:26.47 | ishwerdas | using Qt framework |
| 13:27.15 | ishwerdas | then may be they can be later directly used in new GUI for BRL-CAD |
| 13:27.29 | ishwerdas | which I have seen in BRL-CAD's to-do list last year |
| 13:27.56 | ankesh11 | isherdas: I have used Qt in the past but how do you avoid the native look it generates? |
| 13:28.01 | YashM | oh, there isnt an other way round? |
| 13:28.06 | ishwerdas | there is |
| 13:28.17 | ishwerdas | you can write xml for it |
| 13:28.19 | ishwerdas | if you want |
| 13:28.24 | ishwerdas | sry QML |
| 13:28.31 | ankesh11 | QML, yeah |
| 13:28.48 | ishwerdas | ankes11 I din't get your question |
| 13:28.53 | andrei_ | the whole web is pretty much *ML ... |
| 13:29.17 | ishwerdas | I guess the problem people say about Qt is that it does not give a native feel |
| 13:29.23 | YashM | i think it means the "Qtness" |
| 13:29.49 | ishwerdas | but that's the price you pay for having cross platform consistent GUI |
| 13:30.06 | andrei_ | isn't the only other alternative GTK? |
| 13:30.07 | andrei_ | for C++? |
| 13:30.30 | ishwerdas | no, we have Qt |
| 13:30.31 | teepee- | nope wxWindows / fltk / ... :) |
| 13:30.38 | ishwerdas | and many more |
| 13:30.59 | andrei_ | ishwerdas, I meant aside of Qt, of course |
| 13:31.05 | ishwerdas | :P |
| 13:31.09 | *** join/#brlcad mihainea_ (~mihaineac@86.35.127.70) |
| 13:33.32 | *** join/#brlcad gauravjeet (75dcad6d@gateway/web/cgi-irc/kiwiirc.com/ip.117.220.173.109) |
| 13:34.28 | andrei_ | am iesit, ne vedem acolo |
| 13:34.32 | andrei_ | oops |
| 13:34.40 | Marctannous | haha |
| 13:34.50 | andrei_ | bye ppl |
| 13:35.01 | YashM | ciao |
| 13:35.17 | Marctannous | oh my god |
| 13:35.35 | Marctannous | I finally have the chance to implement a web page with the new html canvas and not go overboard because it really fits |
| 13:36.45 | teepee- | haha, that's software development... finding the right problem for the solution |
| 13:36.47 | teepee- | ;) |
| 13:37.05 | Marctannous | this is really new technology |
| 13:37.26 | Marctannous | I'm so pumped |
| 13:37.46 | teepee- | fears Marctannous will find out about WebRTC :) |
| 13:38.04 | teepee- | yep, there's always cool new stuff going on |
| 13:38.15 | Marctannous | reddit's my friend to accomodate new technologies |
| 13:38.26 | Marctannous | the web design sub started small, but now we're pretty huge |
| 13:39.14 | Notify | 03GCI:programmingluko * 5254428328198144 Design a website icon set for brlcad.org #3: Ready for review - The work on this task is ready to be reviewed. |
| 13:39.20 | mihainea_ | Marctannous: you should try hackernews |
| 13:39.34 | Marctannous | let me google it |
| 13:40.11 | Marctannous | this one : https://news.ycombinator.com/ ? |
| 13:40.18 | ankesh11 | The very same |
| 13:40.27 | mihaineacsu | careful, it might get you put things off in order to check it |
| 13:40.44 | Marctannous | or http://www.reddit.com/r/hackernews |
| 13:41.00 | mihaineacsu | I'm off to a local hackathon with Andrei_ |
| 13:41.05 | mihaineacsu | bye guys! |
| 13:41.05 | Marctannous | what's it called? |
| 13:41.27 | mihaineacsu | I don't think it has a name, it's organised by IBM; should be fun though |
| 13:41.36 | Marctannous | good luck and have fun guys |
| 13:41.40 | YashM | good luck |
| 13:43.06 | ``Erik | hackernews is/was good stuff, very startup oriented |
| 13:44.40 | Notify | 03GCI:ishwerdas * 5254428328198144 Design a website icon set for brlcad.org #3: Can be better - Nice try ProgrammingLuko but I guess you can do better. The colors are bit dull and the strokes are... |
| 13:44.41 | Notify | 03GCI:ishwerdas * 5254428328198144 Design a website icon set for brlcad.org #3: Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to... |
| 13:47.14 | *** join/#brlcad wltan (~wltan@101.127.134.59) |
| 13:48.27 | Marctannous | has anyone here tried brackets? |
| 13:48.38 | Marctannous | similar to Sublime, it's growing pretty big |
| 13:49.11 | ankesh11 | Marctannous: I haven't but have good things about it. |
| 13:49.22 | ankesh11 | PyCharm does the job for me though. |
| 13:49.27 | Marctannous | I'm reinstalling Sublime to start coding my task |
| 13:49.39 | Marctannous | was wondering whtehr I should try brackets or not |
| 13:49.43 | Marctannous | whether* |
| 13:49.57 | deepak | What about vim or emacs ;) |
| 13:50.15 | ankesh11 | The instant feedback thing in brackets is great. |
| 13:50.40 | Marctannous | also it's open source |
| 13:50.51 | Marctannous | damn, I'd really love to try it. time to install it :D |
| 13:52.15 | Marctannous | http://brackets.io/img/hero.png oh my god |
| 13:54.11 | ishwerdas | I have tried brackets |
| 13:54.17 | ishwerdas | it's nice |
| 13:54.30 | Marctannous | did you find anything bad about it? |
| 13:54.55 | Marctannous | most of my friends in the industry have already switched over to it from sublime |
| 13:55.05 | ishwerdas | when I tried, it was little tough to install plugins on linux |
| 13:55.10 | ankesh11 | Marctannous: I doesn't have web framework support yet. Also, I have heard there's a lack of plugins |
| 13:55.18 | ankesh11 | s/I/It |
| 13:55.26 | Marctannous | but it has live preview |
| 13:56.12 | Marctannous | that on its own is so good for a dual monitor setup |
| 13:56.31 | deepak | I think we can get live preview functionality with sublime too. |
| 13:57.30 | Marctannous | http://www.granneman.com/webdev/editors/sublime-text/set-up-sublime-text-to-preview-your-code-in-a-web-browser/ this is how to do it in sublime |
| 13:57.58 | Marctannous | I tried it and didn't like it to be honest, something was clunky |
| 13:58.24 | Marctannous | Brackets feels better at live updating, I'm going to start coding right now, will repot back later with further info :D |
| 14:01.20 | *** part/#brlcad gauravjeet (75dcad6d@gateway/web/cgi-irc/kiwiirc.com/ip.117.220.173.109) |
| 14:13.53 | Notify | 03GCI:o7p9bxbnyj * 4989712045441024 Improve performance of extruded sketch centroid calculations: Task Claimed - I would like to work on this task. |
| 14:15.48 | Notify | 03GCI:deepakkumarsharma * 4989712045441024 Improve performance of extruded sketch centroid calculations: Task Assigned - This task has been assigned to Andromeda Galaxy. You have 100 hours to... |
| 14:18.09 | Notify | 03GCI:ekansh_mahendru * 5833974572122112 Design a BRL-CAD Sticker #15: Ready for review - The work on this task is ready to be reviewed. |
| 14:27.40 | Notify | 03GCI:akshattripathi * 5512189783834624 Design a new website landing page for BRL-CAD #6: Task Claimed - I would like to work on this task. |
| 14:30.29 | Notify | 03GCI:deepakkumarsharma * 5512189783834624 Design a new website landing page for BRL-CAD #6: Task Assigned - This task has been assigned to Akshat Tripathi. You have 100 hours to complete this task,... |
| 14:34.19 | *** join/#brlcad kintel (~kintel@unaffiliated/kintel) |
| 14:35.35 | Notify | 03GCI:krassen * 5307330648342528 Design a BRL-CAD Sticker #5: Ready for review - The work on this task is ready to be reviewed. |
| 14:43.16 | Notify | 03GCI:kalradaksh * 4949239830413312 Transcribe Geometry Model Data from a PDF report to an ASCII file Helicopter: Task Claimed - I would like to work on this task. |
| 14:44.16 | Notify | 03GCI:deepakkumarsharma * 4949239830413312 Transcribe Geometry Model Data from a PDF report to an ASCII file Helicopter: Task Assigned - This task has been assigned to Daksh kalra. You have 100... |
| 14:45.18 | Notify | 03GCI:rossberg * 5056785140416512 Compile BRL-CAD using Microsoft Visual Studio Community Edition: Task Closed - Congratulations, this task has been completed successfully. |
| 14:48.18 | *** join/#brlcad teepee- (bc5c2133@gateway/web/freenode/ip.188.92.33.51) |
| 14:53.20 | *** join/#brlcad ishwerdas (75dcad6d@gateway/web/cgi-irc/kiwiirc.com/ip.117.220.173.109) |
| 14:55.20 | Notify | 03GCI:codingcow_boy * 5063523340124160 Compile BRL-CAD using Microsoft Visual Studio Express 2010: Task Claimed - I would like to work on this task. |
| 14:55.50 | Notify | 03GCI:zynatrix * 5516399187329024 Design a BRL-CAD splash screen #8: Thank you - Hello, Thanks, and I apologise for having to redo it so many times. |
| 14:56.51 | Notify | 03GCI:o7p9bxbnyj * 4989712045441024 Improve performance of extruded sketch centroid calculations: Ready for review - The work on this task is ready to be reviewed. |
| 14:57.56 | Notify | 03GCI:o7p9bxbnyj * 4989712045441024 Improve performance of extruded sketch centroid calculations: Timing - In timings.txt, this version of the code is listed as "Optimized new version" (the third... |
| 14:58.26 | Notify | 03GCI:krassen * 5307330648342528 Design a BRL-CAD Sticker #5: My name and my e-mail address - My name: Krassen Angelov My e-mail: krassen22@gmail.com I dont know: Open Source Solid Modeling... |
| 14:59.37 | Notify | 03GCI:deepakkumarsharma * 5063523340124160 Compile BRL-CAD using Microsoft Visual Studio Express 2010: Task Assigned - This task has been assigned to codingcow-boy. You have 100 hours to complete... |
| 15:06.48 | Notify | 03GCI:akhilha * 4639899508539392 Write manual page documentation (for g-jack): Claim Removed - The claim on this task has been removed, someone else can claim it now. |
| 15:09.21 | Marctannous | http://beta.brlcad.org/ is broken |
| 15:13.53 | maths22 | In what way? |
| 15:15.21 | Marctannous | open it up |
| 15:15.32 | Marctannous | it shows you the index of it, instead of a landing page |
| 15:23.08 | ankesh11 | http://beta.brlcad.org/wp/ is the correct link I believe. |
| 15:23.15 | andromeda-galaxy | maths22, ankesh11: do you know, in functions that take pointer arguments that are set as output parameters, does the BRL-CAD style allow the function to mutate that argument's value internally using it to keep state? |
| 15:23.52 | Notify | 03GCI:comptsy * 4639899508539392 Write manual page documentation (for g-jack): Task Claimed - I would like to work on this task. |
| 15:24.13 | Notify | 03GCI:deepakkumarsharma * 4639899508539392 Write manual page documentation (for g-jack): Task Assigned - This task has been assigned to Comptsy. You have 100 hours to complete this task, good luck! |
| 15:29.47 | Notify | 03GCI:programmingluko * 5254428328198144 Design a website icon set for brlcad.org #3: Ready for review - The work on this task is ready to be reviewed. |
| 15:30.10 | brlcad | Marctannous: what the others said -- this is a setup site, not a production one |
| 15:30.25 | brlcad | Marctannous: go to /wp for the wordpress portion and /wiki for mediawiki |
| 15:31.03 | brlcad | the tasks should have all said /wp but a couple probably didn't get it tacked on |
| 15:32.31 | starseeker | ishwerdas: if you want to check out Qt work, there is a branch with some experimental Qt interface work |
| 15:33.14 | Marctannous | brlcad: check my PM please |
| 15:34.08 | starseeker | so far we haven't put up GCI tasks for the Qt bits yet because it's *very* early experimental stages, but if there is interest we might be able to come up with a few... |
| 15:35.31 | ishwerdas | we had a lot of mockup tasks even last year and may be even before that, so i thought it would be nice if instead of creating images they could straight away create .ui files |
| 15:35.55 | starseeker | hmm... maybe, but so far we haven't been using .ui files - we've been working in straight C++ |
| 15:36.03 | starseeker | well, Qt C++ |
| 15:36.15 | ishwerdas | oh! okk. |
| 15:36.41 | Marctannous | ishwerdas: some of us (me) know how to create UI's in Photoshop/HTML+CSS but have never worked with QT before and would probably provide a better result with what we are used to |
| 15:37.00 | Marctannous | obviously, learning new technology like QT would be awesome too |
| 15:37.02 | starseeker | branch with Qt work is here: http://sourceforge.net/p/brlcad/code/HEAD/tree/brlcad/branches/qtged/ |
| 15:37.28 | starseeker | specifically http://sourceforge.net/p/brlcad/code/HEAD/tree/brlcad/branches/qtged/src/qbrlcad/ |
| 15:37.51 | starseeker | Needs Qt 5.3 |
| 15:38.36 | starseeker | pass the configure flag -DBRLCAD_ENABLE_QT=ON to build it |
| 15:38.58 | ishwerdas | Marchtannous: a task could be to convert one of your created mockups into Qt if any student has that skill-set or interest. Also learning curve is not that steep, so any one can give a try. |
| 15:39.22 | ishwerdas | starseeker: thanks, I'll look into it. |
| 15:39.46 | starseeker | ishwerdas: don't expect too much - it doesn't have any of the 3D view bits enabled |
| 15:39.55 | brlcad | Marctannous: landing page tasks fixed, marking them beginner was not intentional |
| 15:39.58 | starseeker | (or even implemented, for that matter) |
| 15:40.21 | Marctannous | brlcad: thank you. did you check out the image I sent in the PM? Is that okay? |
| 15:40.22 | brlcad | a couple were reserved beginner for variety, but there are several non-beginner to choose from |
| 15:40.47 | maths22 | brlcad: I´ll make that redirect |
| 15:43.09 | maths22 | brlcad: fixed through htaccess |
| 15:44.57 | brlcad | YashM: andrei was looking for this earlier: |
| 15:44.58 | brlcad | ~ask |
| 15:44.58 | infobot | Questions in the channel should be specific, informative, complete, concise, and on-topic. Don't ask if you can ask a question first. Don't ask if a person is there; just ask what you intended to ask them. Better questions more frequently yield better answers. We are all here voluntarily or against our will. |
| 15:45.52 | Notify | 03GCI:pulkit10mehta * 5899163250196480 Create a BRL-CAD presentation template #6: Please review my task. - It has been 24 hrs.... Nobody has reviewed it yet.. |
| 15:48.32 | YashM | oh okay |
| 15:52.13 | brlcad | ankesh11: thanks for sharing the reddit link |
| 15:52.23 | Notify | 03GCI:ishwerdas * 5899163250196480 Create a BRL-CAD presentation template #6: Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this... |
| 15:52.26 | brlcad | he seems rather full of himself |
| 15:53.00 | YashM | who? |
| 15:53.03 | Notify | 03GCI:ishwerdas * 5899163250196480 Create a BRL-CAD presentation template #6: Sorry for the delay - Hi! pulkit. Sorry for the delay. The logo in the slides look a little jagged to me. Title and BRL... |
| 15:53.42 | brlcad | ishwerdas: there is actually a super secret effort going on right now getting an interface up in Qt by starseeker |
| 15:53.45 | brlcad | did I say that out loud? |
| 15:53.58 | Notify | 03GCI:wolfcrisis * 5042004748664832 Reproduce any 5 unconfirmed open bug reports: Claim Removed - The claim on this task has been removed, someone else can claim it now. |
| 15:54.21 | brlcad | (you can check out his branch if you want to see where it's at, eerily similar to Marctannous' earlier GUI design submission) |
| 15:54.44 | brlcad | (Marc's icons can be improved, but they're still better than what we got) |
| 15:55.00 | brlcad | there are a slew of icon tasks now (and more coming) |
| 15:57.32 | brlcad | YashM: autodesk ceo |
| 15:57.39 | ishwerdas | hmm, looking forward to see some nice icons. I liked the new interface that openscad has, they use flat simple icons and they really look great. |
| 15:57.57 | ishwerdas | Almost the same icons that we have in our new website design. |
| 15:58.10 | brlcad | YashM: probably not a fair assessment, I don't know him nor him I |
| 15:59.32 | YashM | It's for promotion of the new 3D printer |
| 16:03.16 | Notify | 03GCI:darion2399 * 5001720170020864 Write manual page documentation (for g-step): Task Claimed - I would like to work on this task. |
| 16:05.42 | Notify | 03GCI:amaric * 6356614713966592 Design a BRL-CAD Sticker #11: Task Claimed - I would like to work on this task. |
| 16:07.42 | Notify | 03GCI:darion2399 * 5001720170020864 Write manual page documentation (for g-step): Claim Removed - The claim on this task has been removed, someone else can claim it now. |
| 16:08.47 | Notify | 03GCI:magejohn * 5283195146731520 Identify and eliminate dead code (100+ lines) #3: Claim Removed - The claim on this task has been removed, someone else can claim it now. |
| 16:11.01 | Marctannous | did anyone manage to eliminate dead code? |
| 16:11.13 | Marctannous | I think I saw 10 people removing claims on these tasks in the last week |
| 16:18.35 | Notify | 03GCI:judebirch * 4861494520971264 Design a T-Shirt for BRL-CAD #10: Okay! - I have now |
| 16:18.40 | Notify | 03GCI:judebirch * 4861494520971264 Design a T-Shirt for BRL-CAD #10: Ready for review - The work on this task is ready to be reviewed. |
| 16:18.44 | Notify | 03GCI:borislavrusinov * 6356815033925632 Design a BRL-CAD Sticker #9: Claim Removed - The claim on this task has been removed, someone else can claim it now. |
| 16:22.46 | Notify | 03BRL-CAD Wiki:Laurentang01 * 0 /wiki/User:Laurentang01: |
| 16:25.36 | Marctannous | brlcad: are you here? |
| 16:26.42 | ishwerdas | ~ask |
| 16:26.42 | infobot | Questions in the channel should be specific, informative, complete, concise, and on-topic. Don't ask if you can ask a question first. Don't ask if a person is there; just ask what you intended to ask them. Better questions more frequently yield better answers. We are all here voluntarily or against our will. |
| 16:27.59 | Marctannous | oh |
| 16:28.17 | Marctannous | just a second, I'll link a task. I'm writing my "about" comment because it's a landing page design. |
| 16:32.17 | *** join/#brlcad deepak (~chatzilla@117.212.52.136) |
| 16:36.22 | Notify | 03GCI:calapsss * 5263538490703872 Design a website icon set for brlcad.org #4: Task Claimed - I would like to work on this task. |
| 16:38.17 | Notify | 03GCI:deepakkumarsharma * 6356614713966592 Design a BRL-CAD Sticker #11: Task Assigned - This task has been assigned to Ante M. You have 100 hours to complete this task, good luck! |
| 16:38.37 | Notify | 03GCI:deepakkumarsharma * 5263538490703872 Design a website icon set for brlcad.org #4: Task Assigned - This task has been assigned to Charles. You have 100 hours to complete this task, good luck! |
| 16:40.12 | Notify | 03GCI:tannousmarc * 5517402733281280 Design a new website landing page for BRL-CAD #10: About - My design style is minimalist, simple and flat. I find it beautiful, and this is how all my designs... |
| 16:41.13 | Notify | 03GCI:tannousmarc * 5517402733281280 Design a new website landing page for BRL-CAD #10: Ready for review - The work on this task is ready to be reviewed. |
| 16:41.24 | Marctannous | I'd love if every one of you would look over my task and offer some feedback into this design, been working on it for 6 hours http://www.google-melange.com/gci/task/view/google/gci2014/5517402733281280 |
| 16:41.25 | gcibot | Design a new website landing page for BRL-CAD #10 |
| 16:41.25 | gcibot | Status: NeedsReview (3 days, 18 hours left) |
| 16:41.25 | gcibot | Mentor(s): Sean, Popescu Andrei, Mihai Neacsu, Mandeep Kaur |
| 16:41.42 | Marctannous | Most of your questions should be answered in my comment there too |
| 16:49.37 | brlcad | Marctannous: my first impressions are those two fonts, british spelling, and triangle soup |
| 16:50.10 | brlcad | especially the font on BRL-CAD being a bit too stretched or too small, hard to put my finger on it |
| 16:50.55 | brlcad | the triangle soup part is really fundamental, so while I really like the desing, the implication is off |
| 16:51.57 | brlcad | triangles are a staple of the content creation modeling systems (e.g., maya, 3dstudio, blender, sketchup, etc), not of the CAD and especially not of the solid modeling systems (catia, solidworks, brl-cad, etc) |
| 16:52.25 | deepak | Also spelling of modeling is wrong. |
| 16:52.27 | brlcad | that said, it's still highly geometric, and the polygonal implication isn't very strong |
| 16:53.29 | Marctannous | what do you mean by british spelling? |
| 16:53.47 | Marctannous | http://forum.wordreference.com/showthread.php?t=404988 |
| 16:54.11 | brlcad | modelling vs modeling, colour vs color, defence vs defense, etc |
| 16:54.56 | Marctannous | oh, is that "wrong"? |
| 16:55.40 | brlcad | well our project has long decided that all spelling would be AE so we can be consistent |
| 16:56.02 | Marctannous | oh okay, did not know that, can be fixed easily |
| 16:56.11 | brlcad | sure, not a big deal |
| 16:56.14 | Marctannous | the triangle soup though I'd really like to give it a few points |
| 16:56.29 | Marctannous | it's not a triangle soup, it's actually vertices in 3 dimensions being randomly connected |
| 16:56.41 | Marctannous | theer are polygons in there, but most commonly, triangles |
| 16:56.45 | brlcad | but it definitely jumps out when we talk about our solid modeling system every day for years on end, and then see modelling in big letters ;) |
| 16:57.09 | Marctannous | yeah, I'm not used to american english spelling |
| 16:57.20 | brlcad | triangle soup, polygon soup, the implication is the same |
| 16:57.24 | Marctannous | what I'd like to defend is the vertices effect |
| 16:57.45 | Marctannous | but you also have those polygon soups in BRL-CAD & Archer! |
| 16:58.05 | brlcad | only when importing geometry through a non-CAD format |
| 16:58.17 | brlcad | if you create a sphere, there are no vertices |
| 16:58.32 | Marctannous | doesn't any polygon have vertices? |
| 16:58.37 | brlcad | yes |
| 16:58.42 | brlcad | if you create a sphere, there are no polygons |
| 16:59.00 | Marctannous | yeah but spheres can't be turned into such a nice effect |
| 16:59.24 | *** join/#brlcad sofat (~sofat@202.164.45.208) |
| 16:59.40 | brlcad | like I said, I DO like the design, but the implication is definitely misleading for our domain |
| 16:59.47 | brlcad | consider this image: http://brlcad.org/gallery/diagrams/primitives |
| 17:00.06 | sofat | maths22, please tell me some more updates regarding the theme |
| 17:00.21 | *** join/#brlcad merzo (~merzo@user-94-45-58-138-1.skif.com.ua) |
| 17:00.45 | Notify | 03GCI:wltan * 6127620076863488 Compile BRL-CAD using Microsoft Visual Studio Express 2013: About the uploaded files - There are a few copies of submission.zip uploaded. To anyone reading this, you... |
| 17:01.08 | Marctannous | brlcad: If I take out that effect, I'd most likely have to start from scratch as it is pretty much the pillar of the design, so to speak. |
| 17:03.08 | deepak | On slide 1, "scroll" word and image of scroll part not displaying fully. I can see it only in full-screen mode. Check this : http://awesomescreenshot.com/0e53z8f8e1 |
| 17:03.12 | brlcad | Marctannous: so three comments on that point -- 1) you certainly completed the task, 2) the design is certainly good, and 3) I'd still like to see a slight font change and the spelling fixed as those would have to happen for it to be useable at all |
| 17:03.38 | Marctannous | brlcad: sure thing |
| 17:03.43 | Marctannous | deepak: what resolution is that |
| 17:03.52 | brlcad | i'm not suggesting we wouldn't use it, but the implication does make me very uncomfortable as it sets expectations that will not be realized |
| 17:04.28 | brlcad | the appealing aspect of it is that it is still geometric in nature, and generically so |
| 17:04.54 | YashM | I can't see scroll text either |
| 17:05.02 | Marctannous | brlcad: I'm not trying just to complete tasks, as I would've taken sticker designs for that matter, but to design something usable. If I complete this task, can I get a new landing page design task and create a new layout? |
| 17:05.07 | deepak | Marc, it's 1396 x 768 |
| 17:05.11 | Marctannous | Yashm: what res? |
| 17:05.19 | YashM | 1080 |
| 17:05.27 | Marctannous | yashm: 1920x1080? |
| 17:05.31 | YashM | yeah |
| 17:05.42 | brlcad | Marctannous: absolutely |
| 17:05.43 | Marctannous | deepak: please send me a full scren print |
| 17:05.53 | Marctannous | yashm: send me a full screen print |
| 17:06.01 | Marctannous | yashm: it works perfectly fine on my 1920x1080 monitor |
| 17:06.18 | brlcad | Marctannous: design tasks are two-fold -- potentially something we can directly use OR a design that is inspired and we can leverage through derivation |
| 17:06.45 | Marctannous | brlcad: did you introduce any of these php tasks you were talking about last night/day? |
| 17:07.01 | Marctannous | brlcad: the one with last commits seemed really challenging and would've loved to try it |
| 17:07.02 | brlcad | e.g., the notion of that design is good: simple small text front and center with a subtle geometric background with some highlight interest |
| 17:07.16 | brlcad | I can certainly run with that type of idea using different background imagery |
| 17:07.29 | deepak | Marc, Check this full screen print http://awesomescreenshot.com/0093z8hbc9 |
| 17:07.45 | Marctannous | I'll sleep on it and as I get more accustomed with solid modelling, maybe I'll get a new idea that fits better |
| 17:07.55 | Notify | 03GCI:rexey29 * 4931863265148928 Transcribe Geometry Model Data from a PDF report to an ASCII file: Ready for review - The work on this task is ready to be reviewed. |
| 17:08.21 | Marctannous | deepak: is the "first slide" not full screen on your page? |
| 17:08.41 | YashM | Marc, http://i.imgur.com/HfMnDhq.jpg |
| 17:09.02 | deepak | No |
| 17:09.23 | Marctannous | deepak: are you running it in fullscreen mode? can't see how that is possible |
| 17:09.42 | Marctannous | yashm: try making your startbar hide,it should show |
| 17:09.47 | brlcad | Marctannous: the academic overview is covered pretty well here: http://en.wikipedia.org/wiki/Solid_modeling#Solid_representation_schemes |
| 17:10.44 | Marctannous | brlcad: I'm a picture guy. The pictures you sent above helped me understand the topic better than its definition :D but yeah, I tottally see where you are coming from |
| 17:10.50 | brlcad | what you're probably used to thinking of with triangles and polygons is but a small subset of the "Boundary representation" section (most CAD systems use a far more complicated NURBS boundary representation) |
| 17:11.07 | brlcad | hold on, I have a better picture how it pertains to CAD |
| 17:11.27 | deepak | Marc, this is what I get in full-screen mode http://awesomescreenshot.com/0893z8ird3 |
| 17:11.27 | Marctannous | yashm: I am working with a scrollbar that hides automatically and did not realize the text is being hidden if you do have it locked there, will fix it though as it should work on every screen |
| 17:11.30 | YashM | Marc, it shows but thats not supposed to happen |
| 17:12.05 | Marctannous | yashm: yep, I am working on it |
| 17:12.10 | YashM | ok |
| 17:12.13 | Marctannous | deepak: the resolution of that picture is width: 1353px; height: 1900px; } |
| 17:12.18 | brlcad | http://brlcad.org/tmp/geometry_representations.png |
| 17:12.45 | Marctannous | brlcad: I suppose brl-cad handles the second option, the brep nurbs, right? |
| 17:12.53 | brlcad | brl-cad has support for all three of those, but really the first two dominate |
| 17:13.06 | brlcad | we're pretty much the best at the first |
| 17:13.25 | brlcad | we're furiously expanding support for the second form (brep/nurbs) |
| 17:13.29 | Marctannous | yep, it's clear now why my design does not fit |
| 17:14.05 | Marctannous | My understanding of geometry is pretty limited, and in what I've done so far, vertices were everywhere |
| 17:14.13 | Marctannous | but I now know what you meant |
| 17:14.31 | Marctannous | deepak: I have no idea what screen 1353x1900 is |
| 17:15.06 | brlcad | it fits, it's just not a strong fit |
| 17:15.16 | Marctannous | deepak: the issue comes from the fact that my picture scales perfectly at 16:9 and 16:10 and just goes to width:auto ( 100% ) but your monitor is of a resolution I've never seen before |
| 17:15.31 | brlcad | it's a strong fit to that third category, which we try to avoid if at all possible ;) |
| 17:16.13 | Marctannous | why is that though? |
| 17:16.28 | brlcad | think of the purpose of using a CAD system |
| 17:16.38 | Marctannous | I mean, ignore the whole design part and that, but why do you guys try to avoid vertices and stuff and go for csg? |
| 17:17.00 | brlcad | you're trying to design something for a real purpose like manufacturing or (as in our case) analysis |
| 17:17.14 | brlcad | the analysis propeties of mesh geometry are just terrible |
| 17:17.14 | Marctannous | yep |
| 17:17.21 | Marctannous | why is that/ |
| 17:18.03 | brlcad | the short answer is numerics, sampling artifacts, and data explosion |
| 17:18.13 | brlcad | you literally can study this for an entire year in university |
| 17:18.13 | Notify | 03GCI:vladyordanov * 6433230555185152 Design a banner for our Facebook page (and/or other social media sites) #5: Ready for review - The work on this task is ready to be reviewed. |
| 17:18.41 | brlcad | to analyze something simple, like mass for example |
| 17:18.46 | Notify | 03GCI:devinjohnson1999 * 4954452779859968 Design a web page that overviews the BRL-CAD contributors #5: Task Claimed - I would like to work on this task. |
| 17:18.50 | Marctannous | let me just google what sampling artifcats means |
| 17:19.05 | brlcad | you have to have something solid, solid geoemtry |
| 17:19.41 | Marctannous | let me see if I udnerstand this correctly, basically the same sphere could be defined by only radius and center |
| 17:19.51 | brlcad | solid geometry is a huge domain of geometric representation which basically has some fundamental properties that must be upheld for something to be considered "solid" and hence be possible to analyze its mass |
| 17:19.51 | Marctannous | or by a bunch of vertices and segments |
| 17:20.01 | brlcad | yes |
| 17:20.09 | brlcad | so say I want to calculate the mass of that sphere |
| 17:20.11 | Marctannous | working with only radiuses and centers is by far easier than with a hundred dozen of other variables |
| 17:20.18 | Marctannous | okay, that makes sense |
| 17:20.35 | *** join/#brlcad sofat (~sofat@202.164.45.204) |
| 17:20.45 | Notify | 03GCI:deepakkumarsharma * 4954452779859968 Design a web page that overviews the BRL-CAD contributors #5: Task Assigned - This task has been assigned to Devin Johnson. You have 100 hours to complete... |
| 17:20.51 | maths22 | Marctannous: these spheres offer a nice looking example: http://courses.washington.edu/arch481/1.Tapestry%20Reader/6.How%20To/2.Rhino%20+%20V-Ray/g.invis/rhinosmoothing.jpg |
| 17:20.57 | brlcad | basic algebra tells me that the volume is (4 / 3) * pi * radius^3 |
| 17:21.09 | brlcad | so if I have a radius and a density, I can tell you the mass |
| 17:21.23 | brlcad | if I have polygons ... well things just got a hell of a lot more complicated |
| 17:21.32 | brlcad | to the polygons actually attach to each other? |
| 17:21.42 | brlcad | do the polygons actually enclose a volume? |
| 17:21.42 | Marctannous | and on the other hand, working with vertices you'd have to add up all the small volumes to get the big volume of the sphere and then multiply that by its density |
| 17:21.49 | Notify | 03GCI:vgeorgiev * 6487841399898112 Design a BRL-CAD business card #4: Ready for review - The work on this task is ready to be reviewed. |
| 17:21.52 | Marctannous | yeah |
| 17:21.53 | brlcad | are you sure there are no tiny cracks? |
| 17:21.59 | brlcad | is it inside out? |
| 17:22.14 | Marctannous | are there any advantages to working with vertices then? |
| 17:22.15 | brlcad | just working with floating point numbers makes all of that easily possible |
| 17:22.30 | brlcad | depends on the purpose, but absolutely |
| 17:23.03 | brlcad | vertices are very simple and easy to understand, easy to model with |
| 17:23.13 | Marctannous | so these 3 types of primitives should co-exist, each having its advantages and disadvantages, the ones with as little variables as possible being the ones brl-cad focuses on |
| 17:23.17 | brlcad | easy to teach, easy to render, easy to manipulate, etc |
| 17:23.39 | brlcad | that's why the content modeling system, the gaming industry, etc all use polygonal modeling |
| 17:23.52 | brlcad | you're not doing manufacturing or analysis work there ;) |
| 17:24.11 | brlcad | it's basically why the CAD and solid modeling industry (and their different representation schemes) exist |
| 17:24.20 | Marctannous | I'd suppose some of the games that heavily rely on physics use solid modelling like brl-cad though, right? |
| 17:24.40 | brlcad | that chart I showed you outlines several of the advantages/disadvantages |
| 17:25.07 | Marctannous | I mean calculating how much volume of water should "splash" when an object drops into it seems way easier with the first type of primitives |
| 17:25.18 | brlcad | very few do because they don't actually do real physics simulations, the do heavily approximated ones where errors are quite acceptable |
| 17:25.59 | brlcad | actually water is usually represented with yet another form that isn't on that chart |
| 17:26.26 | Marctannous | is it a mesh |
| 17:26.27 | Marctannous | ? |
| 17:26.52 | brlcad | games will fake it with a mesh |
| 17:26.54 | brlcad | but no |
| 17:27.00 | brlcad | fluids are usually volumetric models which are an implicit+explicit representation hybrid |
| 17:27.04 | Marctannous | I know something about modelling!!! |
| 17:27.09 | Marctannous | oh |
| 17:27.14 | Marctannous | nevermind |
| 17:27.16 | brlcad | it gets complicated |
| 17:27.43 | brlcad | if you think of even a popular movie like Finding Nemo |
| 17:28.16 | brlcad | LOTS of water simulation going on there ... and not for an analysis purpose, but they put a lot of effort to make it look good so they use about a half dozen *different* representation types |
| 17:28.26 | brlcad | depending on what type of water is being rendered in the movie |
| 17:28.52 | brlcad | the scene where nemo is in the whale's mouth and water is sloshing all around has 4 or 5 different water models in there |
| 17:29.04 | Marctannous | :O |
| 17:29.55 | Marctannous | design-wise, representing vertices is so much easier than basically, "automatically-generated structures" |
| 17:30.15 | Marctannous | I for example have no idea of how to represent a sphere only by its radius |
| 17:30.22 | Marctannous | in any coding language |
| 17:30.52 | Marctannous | obviously, I would just go and 3 dimensionally "trace" every point in the plane but there has to be a better way |
| 17:31.13 | Marctannous | every point in the plane that is at distance radius from the sphere's center * |
| 17:31.27 | Marctannous | while connecting vertices is so easy |
| 17:32.23 | brlcad | with solid modeling, you have to be able to answer 100% correctly whether a point is inside or outside of the geometry |
| 17:32.39 | brlcad | inside, outside, or on the surface are your only three options |
| 17:32.41 | Notify | 03GCI:pulkit10mehta * 5899163250196480 Create a BRL-CAD presentation template #6: Ready for review - The work on this task is ready to be reviewed. |
| 17:32.46 | Notify | 03GCI:borislavrusinov * 5818109499801600 Design a BRL-CAD Sticker #14: Task Claimed - I would like to work on this task. |
| 17:32.53 | Marctannous | doing that with a sphere knowing its radius is easy though |
| 17:32.59 | brlcad | exactly |
| 17:33.08 | Marctannous | just check its distance to the center and compare it to the radius |
| 17:33.17 | Marctannous | oh, I see your point |
| 17:33.19 | brlcad | which is exactly what we do |
| 17:33.25 | brlcad | but if I gave you a set of points that merely "look" like a sphere .. |
| 17:33.38 | brlcad | now you have to ascertain whether those points are properly connected |
| 17:34.22 | brlcad | is it the space inside the circle that's solid or is it the space outside the circle? maybe I'm looking at a hole in a box |
| 17:34.45 | Marctannous | I suppose you could do a "convex wrapper" as we call it in romanian |
| 17:34.53 | Marctannous | not sure if that's how american |
| 17:34.59 | Marctannous | americans use it |
| 17:35.07 | Marctannous | basically trace it |
| 17:35.23 | brlcad | even worse, as I get really close to the surface, I"m going to get wrong answers if the tessellation is insufficiently sampled |
| 17:35.29 | andromeda-galaxy | This talks lots about how complex polygonal mesh-based modeling can be: www.scorec.rpi.edu/REPORTS/1986-1.pdf (starseeker mentioned it to me tomorrow) |
| 17:35.34 | Marctannous | but yeah, that's like O(vertices) while with solid modelling you have O(1) |
| 17:35.36 | andromeda-galaxy | s/tomorrow/yesterday/ |
| 17:36.19 | Marctannous | this is actually interesting |
| 17:37.29 | Marctannous | let me quickly fix the webpage, and then I'll start reading that link andromeda-galaxy sent |
| 17:37.30 | brlcad | ah yes, weiler's thesis ... so that entire 250+ page thesis is one method for representing a solid polygonal mesh with properties that let you answer with mathematical certainty what is inside or out |
| 17:38.25 | andromeda-galaxy | brlcad: is that what the BRL-CAD nmg primitive is based on? |
| 17:38.30 | andromeda-galaxy | it looks like it is to me... |
| 17:38.36 | Marctannous | while with solid modelling you need 3 lines of code |
| 17:39.07 | Notify | 03GCI: * : - |
| 17:41.19 | Notify | 03BRL-CAD Wiki:Mystiquelady * 0 /wiki/User:Mystiquelady: |
| 17:41.20 | brlcad | Marctannous: this is actually a good pic to explain the sampling problem with tessellated (polygonal or triangle) geometry |
| 17:41.23 | brlcad | http://1.bp.blogspot.com/-fh_RdiiSo_I/U7lYEGV4TOI/AAAAAAAACso/vxviUVTY-8w/s1600/gauss2.png |
| 17:42.00 | brlcad | consider a simple 2D circle |
| 17:43.06 | brlcad | in CAD-terms, lets say the "actual" mathematical circle is either the purple or black circle or halfway in between |
| 17:43.48 | Marctannous | yup |
| 17:43.49 | brlcad | the red depiction is that same circle in what we refer to as a polygonal boundary representation (polylines) |
| 17:45.03 | brlcad | if I give you a random real 3D point in that picture and ask you "is the point inside, outside, or on the circle ... the red will always be wrong given the right sample point |
| 17:45.52 | brlcad | I can of course add more detail, increase the resolution further and further (which has costs in terms of memory and cpu time) to reduce that likelihood |
| 17:46.03 | brlcad | but I'll always be able to provide a point that will return the wrong answer |
| 17:46.27 | Marctannous | it's the same with vectors vs non-vectors |
| 17:46.42 | brlcad | you mean like if that was an SVG circle? |
| 17:46.54 | Marctannous | a SVG element vs a basic PNG |
| 17:47.09 | Marctannous | given the right sample point, the PNG will always be "bad" |
| 17:47.13 | Marctannous | no matter the PNG |
| 17:47.37 | Marctannous | except in solid modelling you allow no mistakes, while in design we do |
| 17:47.44 | brlcad | pixel representations are basically the same problem, yes |
| 17:48.21 | brlcad | svg vs png in 2D is basically the same problem as NURBS vs triangles |
| 17:48.29 | Marctannous | at a theoretical level, yep |
| 17:48.48 | brlcad | if your theory is not reliable, neither is your analysis result |
| 17:49.04 | brlcad | which would make for a terrible analysis CAD tool ;) |
| 17:49.35 | Marctannous | agreed |
| 17:49.53 | brlcad | that's why pretty much no CAD tool works with polygonal geometry by default as the preferred representation type -- it's usually but an approximation of something else |
| 17:50.10 | brlcad | our website really needs a whole section dedicated to explaining all of this ;) |
| 17:50.29 | brlcad | andromeda-galaxy: how about now? |
| 17:50.50 | brlcad | I got maybe a half hour |
| 17:50.52 | andromeda-galaxy | brlcad: sure! |
| 17:50.58 | Marctannous | I think one of the pictures above, if added to a wiki page would explain it single-handedly |
| 17:51.50 | brlcad | andromeda-galaxy: and don't get to expecting this in the future, you've just been almost patient waiting for the tasks to get created so you have 3-4 days of karma to burn ;) |
| 17:52.04 | andromeda-galaxy | brlcad: indeed! |
| 17:52.05 | brlcad | so this is catch-up |
| 17:52.48 | andromeda-galaxy | okay, that sounds fair... |
| 17:57.19 | Notify | 03GCI:codingcow_boy * 5063523340124160 Compile BRL-CAD using Microsoft Visual Studio Express 2010: Ready for review - The work on this task is ready to be reviewed. |
| 17:57.52 | Marctannous | brlcad: added version2, fixing the typing mistake and the font sizes http://www.google-melange.com/gci/task/view/google/gci2014/5517402733281280 |
| 17:57.58 | gcibot | Design a new website landing page for BRL-CAD #10 |
| 17:57.58 | gcibot | Status: NeedsReview (3 days, 16 hours left) |
| 17:57.59 | gcibot | Mentor(s): Sean, Popescu Andrei, Mihai Neacsu, Mandeep Kaur |
| 17:58.27 | Marctannous | I will take another landing page design task if I come up with a new idea, now that I know the subject way better. Is that okay? |
| 17:58.44 | Notify | 03GCI:brlcad * 4989712045441024 Improve performance of extruded sketch centroid calculations: Task Closed - Congratulations, this task has been completed successfully. |
| 17:58.59 | brlcad | Marctannous: I look forward to it |
| 17:59.25 | brlcad | Marctannous: so can you tweak the font and change the spelling quick, I can mark it closed |
| 17:59.28 | Notify | 03GCI:o7p9bxbnyj * 5580955767013376 Expose and validate sketch and extruded sketch centroid analysis: Task Claimed - I would like to work on this task. |
| 17:59.34 | Marctannous | that's what I did |
| 17:59.46 | brlcad | did I miss that? |
| 17:59.53 | Marctannous | there's a new rar file uploaded, font is tweaked and the spelling corrected |
| 18:00.05 | Marctannous | "version2.rar" |
| 18:00.08 | Notify | 03GCI:brlcad * 5580955767013376 Expose and validate sketch and extruded sketch centroid analysis: Task Assigned - This task has been assigned to Andromeda Galaxy. You have 100 hours to complete this... |
| 18:00.33 | brlcad | ah, I'd apparently refreshed too quickly, I see it now |
| 18:00.48 | Notify | 03GCI:o7p9bxbnyj * 5580955767013376 Expose and validate sketch and extruded sketch centroid analysis: Ready for review - The work on this task is ready to be reviewed. |
| 18:00.58 | Notify | 03GCI:deepakkumarsharma * 5818109499801600 Design a BRL-CAD Sticker #14: Task Assigned - This task has been assigned to Borislav Rusinov. You have 100 hours to complete this task, good luck! |
| 18:01.45 | Notify | 03GCI:brlcad * 5517402733281280 Design a new website landing page for BRL-CAD #10: Task Closed - Congratulations, this task has been completed successfully. |
| 18:02.07 | brlcad | Marctannous: the animation is pretty cool |
| 18:02.18 | Marctannous | html canvas element in action |
| 18:02.28 | brlcad | Marctannous: are you familiar with csg? |
| 18:02.42 | Marctannous | http://en.wikipedia.org/wiki/Constructive_solid_geometry |
| 18:02.43 | brlcad | constructive solid geometry, boolean operations |
| 18:02.44 | Marctannous | this? |
| 18:03.20 | brlcad | indeed |
| 18:03.54 | Marctannous | not familiar with it, trying to understand how it works but it isn't really well explained on wikipedia |
| 18:04.01 | Marctannous | gotta dig a bit deepe |
| 18:05.34 | brlcad | what I had in mind was related to the mesh animation turning into some sort of dynamic CSG animation |
| 18:06.21 | Marctannous | not sure how I would go about doing it |
| 18:06.36 | brlcad | like have the cursor randomly dropping circles, squares, and triangle pairins that randomly intersect, union, subtract |
| 18:06.55 | brlcad | might be able to use csg.js if the view can be fixed to 2D |
| 18:06.57 | brlcad | http://evanw.github.io/csg.js/ |
| 18:07.05 | brlcad | helps explain CSG too ;) |
| 18:07.19 | brlcad | note those canvases are interactive |
| 18:07.53 | Marctannous | I'll have to see how much does this alter the pageload |
| 18:08.15 | Marctannous | also how to transpose it all into 2D |
| 18:08.41 | Marctannous | also, is the font tweaking okay? or does it need more altering? |
| 18:09.54 | brlcad | it's better |
| 18:09.55 | Notify | 03GCI:gjeet * 6487841399898112 Design a BRL-CAD business card #4: Task Closed - Congratulations, this task has been completed successfully. |
| 18:10.00 | brlcad | you certainly made it a lot bigger |
| 18:10.05 | brlcad | mixed feelings about that :) |
| 18:10.23 | Marctannous | takes away the attention from the triangle soup going on in the background :D |
| 18:10.39 | brlcad | so is that canvas animation just looping or is it's behavior changing? |
| 18:11.24 | Notify | 03GCI:gjeet * 6433230555185152 Design a banner for our Facebook page (and/or other social media sites) #5: Task Closed - Congratulations, this task has been completed successfully. |
| 18:11.25 | brlcad | i.e. are you drawing those vertices and lines and animating them or just looping through frames of a pre-prepared animation |
| 18:11.34 | Marctannous | not looping |
| 18:11.48 | Marctannous | I find the 5 closest points to each point |
| 18:12.02 | Marctannous | create segments between those |
| 18:12.19 | Marctannous | color the segments according to distance |
| 18:12.41 | Marctannous | that's done with a circle |
| 18:13.06 | Marctannous | and do this every time the mouse cursor hcanges position |
| 18:13.15 | Marctannous | according to the mouse's X and Y coordinates |
| 18:13.37 | Marctannous | everything is done in 2D, looks pseudo-3D and I just love the effect |
| 18:13.46 | Notify | 03GCI:Melange * 4959197779197952 Write manual page documentation (for off-g): Task due soon - There are less than 24 hours left until the deadline, please submit your work soon. |
| 18:14.16 | brlcad | yeah, it's really nice |
| 18:14.36 | Notify | 03GCI:gjeet * 6433230555185152 Design a banner for our Facebook page (and/or other social media sites) #5: Great Design - Hey Vladimir, your design is simply great, you are going good. Could you... |
| 18:15.27 | YashM | Marc, you made it yourself? |
| 18:15.45 | Marctannous | nope |
| 18:15.51 | Marctannous | the canvas element is really new |
| 18:16.03 | brlcad | what it made me think of was having something almost identical in the basic logic but instead of vertices, you create 2D primitives (sphere, box, triangle) at those points |
| 18:16.05 | Marctannous | remembered seeing these on reddit a few weeks ago |
| 18:16.23 | Marctannous | everyone is still experimenting with it |
| 18:16.35 | YashM | wouldn't that become too cluttered? |
| 18:16.39 | Marctannous | search codepen.io for "vertices canvas" loads of people trying this thing |
| 18:16.58 | Marctannous | brlcad: the primitives would be really altered |
| 18:17.23 | brlcad | you still retain the motion they have, but instead of drawing line segments between them, you depict a boolean relationship |
| 18:18.11 | brlcad | i.e., you evaluate the booleans as they move |
| 18:18.26 | brlcad | which would great this moving geometric soup |
| 18:18.31 | brlcad | s/great/create/ |
| 18:19.06 | Marctannous | brlcad: I think this would look good if I only create hexagons instead of multiple types of primitives |
| 18:19.36 | Marctannous | but I'd still have to somehow connect hexagons between them to create something good looking, not sure how I'd do that |
| 18:19.48 | Marctannous | probably randomly choose one of its vertices and seek the closest hexagon |
| 18:20.24 | Marctannous | new technology is very great to work on because you can really just come up with something that changes everything |
| 18:20.42 | brlcad | that sounds like it'd still be emphasizing a polygonal construct with hexagons |
| 18:20.43 | Marctannous | when z-index was introduced in CSS, the guy who first came up with parallax scrolling must've felt like a genius |
| 18:20.52 | brlcad | you want something smooth, like a circle |
| 18:20.59 | brlcad | in fact, could be only circles |
| 18:21.12 | Marctannous | brlcad: circles are really hard to draw though |
| 18:21.35 | Marctannous | let me get a snippet of how an average user draws a circle |
| 18:21.39 | Marctannous | in, let's say CSS |
| 18:22.16 | Notify | 03GCI:gjeet * 4861494520971264 Design a T-Shirt for BRL-CAD #10: Task Closed - Congratulations, this task has been completed successfully. |
| 18:22.33 | Marctannous | #circle { margin: 20px auto; background-color: #000; height: 250px; width: 250px; border-radius: 125px; -moz-border-radius: 125px; -webkit-border-radius: 125px; } |
| 18:24.18 | brlcad | here's kind of the gist: http://www.html5canvastutorials.com/advanced/html5-canvas-global-composite-operations-tutorial/ |
| 18:24.25 | Notify | 03GCI:ishwerdas * 5899163250196480 Create a BRL-CAD presentation template #6: Good work! - Yeah that looks better, thanks! :) |
| 18:24.30 | Notify | 03GCI:ishwerdas * 5899163250196480 Create a BRL-CAD presentation template #6: Task Closed - Congratulations, this task has been completed successfully. |
| 18:24.51 | Notify | 03GCI:adityagulati * 5797874164039680 Create a book layout for Doc Camp Book #2: A Humble Request - Sir, I have made the files for my next task. Please review my task fast since I can't claim... |
| 18:26.27 | Marctannous | not sure how the intersection is colored tho |
| 18:26.53 | Marctannous | looks like drawing red over blue makes it turn pink in js |
| 18:26.55 | Marctannous | weird |
| 18:27.12 | *** join/#brlcad gjeet (75dcad6d@gateway/web/cgi-irc/kiwiirc.com/ip.117.220.173.109) |
| 18:27.25 | brlcad | globalCompositionOperation |
| 18:27.48 | brlcad | you could probably get a nice effect by only doing xor |
| 18:28.20 | brlcad | so you create your shapes in place of vertices, have them moving around the same, but apply an xor amongst pairings |
| 18:28.36 | Marctannous | xor is the only boolean operator out of the ones mentioned there that I know of :)) |
| 18:28.44 | brlcad | heh |
| 18:29.03 | brlcad | xor is a dual subtraction operation |
| 18:29.04 | Marctannous | the difference would be that I'd have to work on color opacities |
| 18:29.32 | Marctannous | because doing the effect on a dark colored background with two colors would mess everything up |
| 18:29.35 | brlcad | A XOR B is (A MINUS B) UNION (B MINUS A) |
| 18:29.52 | Marctannous | each shape should be colored with different opacities so that their intersections actually are visible |
| 18:29.58 | Marctannous | yup |
| 18:30.06 | Marctannous | never heard of the others though |
| 18:30.46 | Marctannous | xor is used in game theory in basic C algorithms |
| 18:31.00 | Marctannous | and not even that is thought in normal high schools |
| 18:31.05 | Marctannous | taught* |
| 18:31.14 | brlcad | opacities might be a neat effect too, but xor just making both sides disappear would be interesting as that creates new shapes |
| 18:31.22 | brlcad | you no longer see circle and box |
| 18:31.28 | Notify | 03GCI:gjeet * 5307330648342528 Design a BRL-CAD Sticker #5: Task Closed - Congratulations, this task has been completed successfully. |
| 18:31.37 | brlcad | you see notched shapes and long curves |
| 18:31.44 | Marctannous | hmm |
| 18:31.46 | brlcad | you'd probably want to vary the size of these entities |
| 18:31.55 | Marctannous | but I also need to keep in mind a minimum distance between objects |
| 18:31.57 | Notify | 03GCI:devinjohnson1999 * 4954452779859968 Design a web page that overviews the BRL-CAD contributors #5: None - Do I need to make an entire website or just a page featuring the contributors. |
| 18:32.20 | Marctannous | vary the sizes between a given interval so that I know the upper boundary and can use it to make sure I don't intersect entities I don't want to intersect |
| 18:32.52 | Notify | 03GCI:brlcad * 5580955767013376 Expose and validate sketch and extruded sketch centroid analysis: Task Closed - Congratulations, this task has been completed successfully. |
| 18:33.02 | brlcad | andromeda-galaxy: is ID_SKETCH already exposed? |
| 18:33.06 | brlcad | to analyze |
| 18:33.20 | Marctannous | I'm actually going to start a discussion on reddit regarding global composite operations in html canvas and see what the guys over there think of it |
| 18:33.35 | andromeda-galaxy | brlcad: ID_SKETCH is already exposed to analyze_sketch() |
| 18:33.41 | andromeda-galaxy | where I added the centroid computation |
| 18:33.42 | brlcad | okay |
| 18:33.51 | andromeda-galaxy | ID_EXTRUDE isn't, so I just added it to analyze_general() |
| 18:33.56 | Marctannous | by the way, is there any way you can manually claim a task for me? or close the other one? I can't work on two tasks at the same time this year, I remember being able to take 2 tasks in previous years of gci :-s |
| 18:34.00 | brlcad | anyways, just a thought and boolean operations definitely would be a solid fit (pun intended) |
| 18:34.23 | andromeda-galaxy | also, is this a bug in bu_vsscanf: |
| 18:34.32 | brlcad | "where I added the centroid computation" <-- no comprendo |
| 18:34.39 | andromeda-galaxy | sscanf(", 32.0032, 32.1102", ", %n", &c) gives 0 return value and 2 in c |
| 18:35.08 | andromeda-galaxy | the patch includes a segment to make analyze_sketch call the centroid function and display it |
| 18:35.31 | andromeda-galaxy | whereas bu_sscanf() with the same arguments gives 0 return value and 1 in c |
| 18:36.13 | Notify | 03GCI:gjeet * 4954452779859968 Design a web page that overviews the BRL-CAD contributors #5 http://www.google-melange.com/gci/task/view/google/gci2014/4954452779859968: Just the contributors page ... |
| 18:36.38 | brlcad | andromeda-galaxy: so I think you're saying "yes", but you're telling me what you did :) |
| 18:37.00 | andromeda-galaxy | about the bug in bu_sscanf()? I wanted to check that there wasn't |
| 18:37.01 | brlcad | I see the block where Centroid is printed for ID_SKETCH |
| 18:37.14 | brlcad | I didn't cross apply the patch to see where that bit is |
| 18:37.19 | andromeda-galaxy | ah... |
| 18:37.36 | brlcad | my question is if I run "analyze mysketch" will it report that sketch's centroid? |
| 18:37.39 | andromeda-galaxy | it will |
| 18:37.44 | brlcad | okay :) |
| 18:37.54 | brlcad | and ditto for "analyze someextrude" |
| 18:37.59 | Marctannous | brlcad: please? :) |
| 18:38.10 | brlcad | being the new analyze_general() call I presume |
| 18:38.14 | andromeda-galaxy | indeed |
| 18:39.01 | brlcad | okay, sounds great .. next task? :) |
| 18:39.06 | brlcad | that sounds like a bug |
| 18:39.07 | andromeda-galaxy | just claimed |
| 18:39.14 | brlcad | but what does sscanf do? |
| 18:39.18 | Notify | 03GCI:o7p9bxbnyj * 5048599469621248 Implement bu_scan_fastf_t() function to scan floating point values from strings: Task Claimed - I would like to work on this task. |
| 18:39.33 | andromeda-galaxy | So calling the stdio() sscanf() gives 0,2 (return,c) |
| 18:39.38 | andromeda-galaxy | whereas bu_sscanf gives 0,1 |
| 18:39.48 | brlcad | so yeah, a bug |
| 18:39.51 | andromeda-galaxy | that's why the patch I'm going to put up for http://www.google-melange.com/gci/task/view/google/gci2014/5048599469621248 uses sscanf() instead of bu_sscanf() |
| 18:39.52 | gcibot | Implement bu_scan_fastf_t() function to scan floating point values from strings |
| 18:39.52 | gcibot | Status: ClaimRequested |
| 18:39.52 | gcibot | Mentor(s): Sean, Daniel_R |
| 18:39.57 | andromeda-galaxy | I couldn't figure out why my code wasn't working.... |
| 18:40.32 | brlcad | gjeet: thanks |
| 18:40.34 | Notify | 03GCI:Melange * 5836136417067008 BRL-CAD Promotional Video: Task due soon - There are less than 24 hours left until the deadline, please submit your work soon. |
| 18:40.35 | Notify | 03GCI:gjeet * 5048599469621248 Implement bu_scan_fastf_t() function to scan floating point values from strings: Task Assigned - This task has been assigned to Andromeda Galaxy. You have 100 hours to... |
| 18:41.04 | Notify | 03GCI:jack4ga * 5604954702086144 Fix at least 8 spelling mistakes in at least 8 different files #2: Task Claimed - I would like to work on this task. |
| 18:41.15 | gjeet | brlcad: what for ? |
| 18:41.24 | Notify | 03GCI:jack4ga * 5604954702086144 Fix at least 8 spelling mistakes in at least 8 different files #2: Claim Removed - The claim on this task has been removed, someone else can claim it now. |
| 18:41.28 | brlcad | Marctannous: no I cannot but you can unclaim and reclaim tasks |
| 18:41.29 | Marctannous | :( |
| 18:41.33 | brlcad | and your other task was reviewed |
| 18:41.52 | brlcad | gjeet: you accepted the claim before I could get to it :) |
| 18:42.14 | Notify | 03GCI:blakec2298 * 5870280601763840 Write manual page documentation (for tgf-g): Task Claimed - I would like to work on this task. |
| 18:42.30 | gjeet | :D |
| 18:42.37 | Marctannous | any idea why they only allow a task per student at any given time? maybe let people who have their only task in "waiting for review" be able to claim other tasks? |
| 18:42.52 | brlcad | Marctannous: another idea would be to create bezier curves between pairs of points, and xof/whatever/booleanize them ;) |
| 18:42.55 | brlcad | http://www.html5canvastutorials.com/tutorials/html5-canvas-bezier-curves/ |
| 18:43.10 | brlcad | but I like the idea of using fundamental primitives more |
| 18:43.29 | Marctannous | yeah, basic shapes seem nicer |
| 18:43.34 | brlcad | Marctannous: just to keep things simple and give everyone a fair chance at grabbing things |
| 18:44.36 | brlcad | Marctannous: if i'm not mistaken, you currently have nothing claimed |
| 18:44.43 | andromeda-galaxy | brlcad: sorry, uploaded for http://www.google-melange.com/gci/task/view/google/gci2014/5048599469621248 but forgot to mark complete... |
| 18:44.43 | gcibot | Implement bu_scan_fastf_t() function to scan floating point values from strings |
| 18:44.44 | gcibot | Status: NeedsReview (4 days, 3 hours left) |
| 18:44.44 | gcibot | Mentor(s): Sean, Daniel_R |
| 18:44.45 | Notify | 03GCI:o7p9bxbnyj * 5048599469621248 Implement bu_scan_fastf_t() function to scan floating point values from strings: Ready for review - The work on this task is ready to be reviewed. |
| 18:44.45 | Marctannous | yeah, I'm looking for a code task |
| 18:44.57 | brlcad | ahh |
| 18:44.59 | brlcad | very good |
| 18:45.14 | Marctannous | as I struggled for an entire day to get a working environment of brl-cad on a debian VM and want to use it |
| 18:45.21 | Marctannous | only did 2 tasks related to that so far |
| 18:45.22 | brlcad | Marctannous: please try the icon tasks at some point :) |
| 18:45.37 | Marctannous | the ones with drawing icons for translate/sheer/etc? |
| 18:45.42 | brlcad | yep |
| 18:45.53 | Marctannous | if there's no exciting coding task, I'll get that one |
| 18:46.11 | brlcad | the massive horde of coding tasks is still being written up |
| 18:46.34 | Marctannous | I was wondering whether anyone actually managed to complete a task that reduces code duplication or cleans dead code |
| 18:46.38 | Marctannous | do you have any idea? |
| 18:46.41 | brlcad | about 2/3's of yesterdays bulk update were design and the remaining 1/3 was half coding half docs |
| 18:46.52 | brlcad | nobody has been able to do that |
| 18:46.52 | Marctannous | saw more than a dozen guys removing claims on those |
| 18:47.07 | brlcad | it sounds really easy and ... if you know C, it is |
| 18:47.51 | brlcad | and, as you noticed, a big part of those tasks is simply getting set up |
| 18:47.57 | Marctannous | Yep |
| 18:48.07 | Marctannous | but removing dead code..how should that be approached? |
| 18:48.08 | brlcad | to find dead code, you have to have all the sources in place and be ready to build |
| 18:48.50 | brlcad | that's basically the task |
| 18:48.58 | brlcad | there are so many ways you can go about finding dead code |
| 18:49.03 | brlcad | simply reading the sources |
| 18:49.11 | brlcad | could write a script and count usages of functions |
| 18:49.17 | brlcad | could use a static analysis tool |
| 18:49.25 | Notify | 03GCI:rahul_mahajan1331 * 5107273286287360 Model BRL-CAD logo in BRL-CAD #2: Task Claimed - I would like to work on this task. |
| 18:49.32 | Marctannous | the global variable tasks seem nice |
| 18:49.41 | Marctannous | powering up my VM to seek global variables :D |
| 18:49.48 | brlcad | with some code tools like eclipse or msvc, you could run "find all references" which is a poor-mans' way to count usages |
| 18:50.08 | brlcad | Marctannous: have you written C programs before? |
| 18:50.26 | Notify | 03GCI:blakec2298 * 5870280601763840 Write manual page documentation (for tgf-g): Claim Removed - The claim on this task has been removed, someone else can claim it now. |
| 18:50.41 | Marctannous | here in Romania I was at one point in time one of the top 5 C programmers of my generation ( given that was when we were 14, the competition wasn't too big ) and knowing algorithms was the way to go |
| 18:50.51 | brlcad | Marctannous: this looks really promising: http://www.skynet.ie/~caolan/Packages/callcatcher.html |
| 18:51.03 | Marctannous | but what we studied for competitions is waaay different from real life usage like BRL-CAD |
| 18:51.11 | brlcad | nods |
| 18:51.22 | Marctannous | object oriented programming was non-existant |
| 18:51.35 | Marctannous | we just had to optimize basic tasks as much as possible |
| 18:52.03 | Marctannous | it got to a point where the difference between getting first place and second place was |
| 18:52.17 | Marctannous | whether you were doing the adding/extraction on bits or not |
| 18:52.49 | Marctannous | used to work with complicated code, all in one file. using files and objects from other files is completely new to me |
| 18:57.00 | Marctannous | brlcad: besides what you sent, is there an easy way for seeking variables in more than one file? |
| 18:57.04 | Marctannous | and see al its usages |
| 19:00.57 | Marctannous | would grep work? |
| 19:03.12 | Marctannous | oh my god |
| 19:03.13 | Marctannous | grep works |
| 19:03.17 | Marctannous | this is amazing |
| 19:03.52 | Notify | 03GCI:tannousmarc * 5028787255246848 Eliminate any library global variable #5: Task Claimed - I would like to work on this task. |
| 19:10.29 | Marctannous | can someone please allow me this task? I already have the patch for it |
| 19:11.06 | Notify | 03GCI:Melange * 6717116350726144 Design a banner for our Facebook page (and/or other social media sites) #2: Task due soon - There are less than 24 hours left until the deadline, please submit your... |
| 19:15.50 | *** join/#brlcad blessing (~blessing@41.205.22.3) |
| 19:20.24 | andromeda-galaxy | Marctannous: I've been considering doing one of those as well, which global did you decide to eliminate? (I don't want to do the same one) |
| 19:20.37 | Marctannous | nmg_eue_dist |
| 19:20.55 | andromeda-galaxy | I considered that too... How did you manage to remove it? |
| 19:21.14 | Marctannous | I serached the whole directory for it |
| 19:21.19 | Marctannous | found it in really few places |
| 19:21.28 | Marctannous | used the actual value there instead of nmg_eue_dist |
| 19:21.28 | andromeda-galaxy | Did you see the uses in conv/ |
| 19:21.29 | andromeda-galaxy | ? |
| 19:21.49 | Marctannous | I found uses in nmg_plot.c |
| 19:21.53 | Marctannous | that's it |
| 19:22.09 | andromeda-galaxy | look in conv/euclid/g-euclid.c, conv/g-x3d.c, cnov/ply/g-ply.c... lots more |
| 19:22.50 | Marctannous | in what folder is conv |
| 19:22.59 | andromeda-galaxy | brlcad-trunk/src/conv/ |
| 19:23.13 | Marctannous | oh I only searched librt |
| 19:23.17 | Marctannous | np, let me search the whole src |
| 19:23.32 | Marctannous | can you help me with one thing though? |
| 19:23.37 | andromeda-galaxy | what? |
| 19:23.45 | Marctannous | when I run svn diff, it also adds the changes I did in previous days for other tasks |
| 19:23.52 | Marctannous | and that weren't commited yet to the actual version |
| 19:23.56 | andromeda-galaxy | svn diff <path to file 1> <path to file 2> ... |
| 19:23.58 | Marctannous | should I just keep them there? |
| 19:24.03 | andromeda-galaxy | or alternative svn changelists |
| 19:24.14 | Marctannous | oh ok |
| 19:24.17 | Marctannous | ty |
| 19:24.47 | Marctannous | tell me which one you will do here or on private message |
| 19:24.50 | Marctannous | so that we don't overlap |
| 19:25.02 | Marctannous | at the moment I will just do nmg_eue_dist |
| 19:25.49 | Notify | 03GCI:Melange * 4951935593480192 Design a banner for our Facebook page (and/or other social media sites) #8: Task due soon - There are less than 24 hours left until the deadline, please submit your... |
| 19:25.58 | andromeda-galaxy | Marctannous: still deciding right now... |
| 19:26.22 | Marctannous | did anyone except me & you do any code tasks yet? |
| 19:26.31 | andromeda-galaxy | I don't think so... |
| 19:26.34 | Marctannous | so we can speak with him and tell him to mention what variable he is doing |
| 19:26.37 | Marctannous | overlapping is not nice |
| 19:26.55 | andromeda-galaxy | ofnlut_ and codingcow-by did compilations, but that's all |
| 19:27.05 | Marctannous | oh ok |
| 19:27.16 | Marctannous | which list are you using for checking who did what task? |
| 19:27.16 | Marctannous | http://ematirov.tk/ |
| 19:27.18 | Marctannous | this one? |
| 19:27.24 | andromeda-galaxy | just the one on the melange website |
| 19:27.28 | Marctannous | oh |
| 19:27.47 | Marctannous | nmg_eue_dist has only 40-50 uses, should be able to do these fairly soon |
| 19:27.55 | Marctannous | I only need someone to give me the task xD |
| 19:30.51 | Notify | 03GCI:sfurti06 * 6390082307096576 Design a T-Shirt for BRL-CAD #2: Ready for review - The work on this task is ready to be reviewed. |
| 19:50.26 | Notify | 03GCI:deepakkumarsharma * 5028787255246848 Eliminate any library global variable #5: Task Assigned - This task has been assigned to Marc Tannous. You have 100 hours to complete this task, good luck! |
| 19:50.41 | Notify | 03GCI:tannousmarc * 5028787255246848 Eliminate any library global variable #5: Task finished - Ignore : CMaketest.txt and rand.c tests as these were used in a previous task, and when I ran SVN... |
| 19:50.51 | Notify | 03GCI:deepakkumarsharma * 5107273286287360 Model BRL-CAD logo in BRL-CAD #2: Task Assigned - This task has been assigned to Rahul Mahajan. You have 100 hours to complete this task, good luck! |
| 19:51.06 | Marctannous | deepakkumarsharma: please http://www.google-melange.com/gci/task/view/google/gci2014/5028787255246848 |
| 19:51.06 | gcibot | Eliminate any library global variable #5 |
| 19:51.06 | gcibot | Status: Claimed (4 days, 3 hours left) |
| 19:51.06 | gcibot | Mentor(s): Hardeep Singh Rai, Ch3ck |
| 19:52.11 | Notify | 03GCI:plaffontj * 5264182400253952 Categorize all of BRL-CAD's commands into a spreadsheet: Question - Is there a text file which contains the description of the commands listed in man? Thanks! |
| 20:01.58 | Notify | 03GCI:Melange * 6127620076863488 Compile BRL-CAD using Microsoft Visual Studio Express 2013: Task due soon - There are less than 24 hours left until the deadline, please submit your work soon. |
| 20:02.08 | Notify | 03GCI:Melange * 5765799415382016 Create a BRL-CAD presentation template: Task due soon - There are less than 24 hours left until the deadline, please submit your work soon. |
| 20:02.43 | Notify | 03GCI:devinjohnson1999 * 4954452779859968 Design a web page that overviews the BRL-CAD contributors #5: None - By a working webpage mockup do you mean an image or an html file with links and the... |
| 20:11.10 | Notify | 03GCI:moret * 5323479725375488 Identify and eliminate dead code (100+ lines) #7: Compilin just one file - Hello, How to compile just one file not the whole project. For example if I make changes... |
| 20:18.42 | Notify | 03GCI:tannousmarc * 5028787255246848 Eliminate any library global variable #5: Ready for review - The work on this task is ready to be reviewed. |
| 20:39.08 | Marctannous | good night mates |
| 20:42.52 | *** join/#brlcad witness___ (uid10044@gateway/web/irccloud.com/x-uepdbogqwyqscsqf) |
| 20:50.10 | starseeker | Marctannous: removing a global isn't always replacing with a value |
| 20:50.42 | Marctannous | did you see my diff file? did I make a mistake anywhere? |
| 20:50.52 | Marctannous | all the other uses were for better visualziation, not affecting anything else |
| 20:51.17 | Marctannous | I understand what you mean, and have checked not to be removing anything that would cause malfunctions |
| 20:52.59 | starseeker | I can't see the diff right now - just making the point that if the global gets anything assigned to it you can't just yank it and replace it with hardcoded values |
| 20:53.47 | starseeker | even with the values, if they are all the same you probably want to #define a name with the value and use the name, so if the value every has to be changed it can be done once |
| 20:54.32 | Marctannous | the only case in which it was changed for anything else other than "better visualization" was inside of a struct |
| 20:54.37 | Marctannous | and I just re-initialized it there |
| 20:54.48 | Marctannous | I hope that makes sense |
| 21:04.50 | ignacio | Leaderboard works again, now in port 5001, http://kuckuck.treehouse.su:5001/ |
| 21:07.29 | Notify | 03BRL-CAD:n_reed * 63601 brlcad/trunk/src/librt/primitives/sketch/sketch.c: fix compiler-reported uninitialized error |
| 21:10.37 | Notify | 03GCI:brlcad * 5028787255246848 Eliminate any library global variable #5: Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task... |
| 21:11.21 | Marctannous | brlcad: what goes wrong? |
| 21:11.37 | Notify | 03GCI:Melange * 4531831353376768 Design a T-Shirt for BRL-CAD #8: Task Reopened - Melange has detected that the final deadline has passed and it has reopened the task. |
| 21:15.04 | starseeker | hmm - looks like Fortran -> C++ doesn't appeal so far :-) |
| 21:16.11 | Marctannous | welp my task needs more work |
| 21:16.15 | Marctannous | but I don't know what's wrong |
| 21:16.15 | Marctannous | xD |
| 21:16.21 | Notify | 03GCI:Melange * 6741580216008704 Design a T-Shirt for BRL-CAD #5: Task due soon - There are less than 24 hours left until the deadline, please submit your work soon. |
| 21:22.38 | Notify | 03GCI:Melange * 4632172593938432 Write a wiki page on joining the BRL-CAD project: Task Reopened - Melange has detected that the final deadline has passed and it has reopened the task. |
| 21:23.04 | *** join/#brlcad andromeda_galaxy (~andromeda@108-225-17-54.lightspeed.sntcca.sbcglobal.net) |
| 21:27.10 | Marctannous | please, when one of the mentors has some time, provide some feedback on what I need to workn on http://www.google-melange.com/gci/task/view/google/gci2014/5028787255246848 |
| 21:27.11 | gcibot | Eliminate any library global variable #5 |
| 21:27.11 | gcibot | Status: NeedsWork (4 days, 2 hours left) |
| 21:27.11 | gcibot | Mentor(s): Hardeep Singh Rai, Ch3ck |
| 21:32.15 | Notify | 03GCI:brlcad * 5028787255246848 Eliminate any library global variable #5: behavior changed - So you certainly eliminated the global, but not without eliminating the feature that variable provided.... |
| 21:35.26 | Notify | 03GCI:tannousmarc * 5028787255246848 Eliminate any library global variable #5: None - Is there any way to revert the repo to the current version on sourceforge? By that I mean, ignore my changes... |
| 21:36.11 | Notify | 03GCI:brlcad * 5048599469621248 Implement bu_scan_fastf_t() function to scan floating point values from strings: Task Needs More Work - One of the mentors has sent this task back for more work. Talk... |
| 21:37.11 | Notify | 03GCI:tardis * 4531831353376768 Design a T-Shirt for BRL-CAD #8: Task Claimed - I would like to work on this task. |
| 21:39.56 | Notify | 03GCI:brlcad * 5048599469621248 Implement bu_scan_fastf_t() function to scan floating point values from strings: looking pretty good - The only two things noticed on quick review are that the... |
| 21:43.01 | Notify | 03GCI:brlcad * 5833974572122112 Design a BRL-CAD Sticker #15: nice! - I like this design! Please also submit your raw working files (PSD, XCF, AI, whatever you used) too and make for review. What... |
| 21:43.11 | Notify | 03GCI:brlcad * 5833974572122112 Design a BRL-CAD Sticker #15: Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy... |
| 21:45.27 | Notify | 03GCI:mandeep * 4531831353376768 Design a T-Shirt for BRL-CAD #8: Task Assigned - This task has been assigned to Aiden. You have 100 hours to complete this task, good luck! |
| 21:47.12 | Notify | 03GCI:Melange * 5538296809652224 Design a banner for our Facebook page (and/or other social media sites) #4: Task due soon - There are less than 24 hours left until the deadline, please submit your... |
| 21:48.17 | Notify | 03GCI:jack_vaughan * 5309919842533376 Design a website icon set for brlcad.org #2: Task Claimed - I would like to work on this task. |
| 21:49.12 | Notify | 03GCI:Melange * 6690570030284800 Design a T-Shirt for BRL-CAD: Task Reopened - Melange has detected that the final deadline has passed and it has reopened the task. |
| 21:56.14 | Notify | 03GCI:mandeep * 5797874164039680 Create a book layout for Doc Camp Book #2: Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this... |
| 21:57.54 | Notify | 03GCI:mandeep * 5797874164039680 Create a book layout for Doc Camp Book #2: File Format - Hi Aditya, Have some patience and don't worry about tasks. We can create more tasks if required. Can you... |
| 21:58.34 | Notify | 03GCI:mandeep * 5309919842533376 Design a website icon set for brlcad.org #2: Task Assigned - This task has been assigned to Jack_Vaughan. You have 100 hours to complete this task, good luck! |
| 22:09.02 | Notify | 03GCI:Melange * 4544323332866048 Design a T-Shirt for BRL-CAD #6: Task Reopened - Melange has detected that the final deadline has passed and it has reopened the task. |
| 22:09.27 | Notify | 03GCI:Melange * 5987394427813888 Design a BRL-CAD splash screen #10: Task due soon - There are less than 24 hours left until the deadline, please submit your work soon. |
| 22:15.13 | Notify | 03GCI:emily_shannon * 5604954702086144 Fix at least 8 spelling mistakes in at least 8 different files #2: Task Claimed - I would like to work on this task. |
| 22:15.58 | Notify | 03GCI:emily_shannon * 5604954702086144 Fix at least 8 spelling mistakes in at least 8 different files #2: Claim Removed - The claim on this task has been removed, someone else can claim it now. |
| 22:18.09 | Notify | 03GCI:Melange * 6390082307096576 Design a T-Shirt for BRL-CAD #2: No more Work can be submitted - Melange has detected that the deadline has passed and no more work can be submitted. The submitted... |
| 22:20.14 | Notify | 03GCI:brlcad * 6390082307096576 Design a T-Shirt for BRL-CAD #2: Deadline extended - The deadline of the task has been extended with 2 days and 2 hours. |
| 22:20.54 | Notify | 03GCI:brlcad * 6390082307096576 Design a T-Shirt for BRL-CAD #2: Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to... |
| 22:26.36 | Notify | 03GCI:brlcad * 6390082307096576 Design a T-Shirt for BRL-CAD #2: a good start - Sfurti, This is a good start and you just might be the first person to submit a women's design too, so thank you for... |
| 22:32.08 | Notify | 03GCI:jack_vaughan * 5309919842533376 Design a website icon set for brlcad.org #2: Claim Removed - The claim on this task has been removed, someone else can claim it now. |
| 22:45.48 | Notify | 03GCI:maryamdawood * 5604954702086144 Fix at least 8 spelling mistakes in at least 8 different files #2: Task Claimed - I would like to work on this task. |
| 22:46.28 | Notify | 03GCI:maryamdawood * 5604954702086144 Fix at least 8 spelling mistakes in at least 8 different files #2: Claim Removed - The claim on this task has been removed, someone else can claim it now. |
| 22:47.08 | Notify | 03GCI:tardis * 4531831353376768 Design a T-Shirt for BRL-CAD #8: Ready for review - The work on this task is ready to be reviewed. |
| 22:52.10 | Notify | 03GCI:Melange * 6182685047259136 Design a BRL-CAD splash screen: Task due soon - There are less than 24 hours left until the deadline, please submit your work soon. |
| 22:52.35 | Notify | 03GCI:Melange * 4956557716488192 Fix at least 8 spelling mistakes in at least 8 different files #5: Task Reopened - Melange has detected that the final deadline has passed and it has reopened the... |
| 23:09.40 | Notify | 03GCI:Melange * 6359310477033472 Design a banner for our Facebook page (and/or other social media sites) #3: Task due soon - There are less than 24 hours left until the deadline, please submit your... |
| 23:30.01 | Notify | 03BRL-CAD:starseeker * 63602 brlcad/trunk/CMakeLists.txt: improve running of make check target |
| 23:31.54 | Notify | 03GCI:mcjose23 * 6068206720516096 Design a BRL-CAD business card #2: Claim Removed - The claim on this task has been removed, someone else can claim it now. |
| 23:36.01 | Notify | 03BRL-CAD:starseeker * 63603 brlcad/trunk/CMakeLists.txt: Better way to exclude regression dependencies from check |
| 23:39.54 | Notify | 03GCI:icyjuban * 5173865613361152 Design a web page that overviews the BRL-CAD contributors: Task Claimed - I would like to work on this task. |
| 23:46.34 | Notify | 03BRL-CAD:starseeker * 63604 brlcad/trunk/regress/CMakeLists.txt: Add the regress log file to the clean list |
