| 00:06.09 | *** join/#brlcad kintel (~kintel@unaffiliated/kintel) |
| 00:31.45 | Notify | 03BRL-CAD:starseeker * 67282 brlcad/trunk/misc/CMake/DocBook.cmake: Go with fewer DocBook build targets. |
| 00:40.45 | Notify | 03BRL-CAD:starseeker * 67283 brlcad/trunk/src/libbu/opt.c: initialize |
| 00:47.00 | brlcad | starseeker: you do realize in r67283 that you only initialized v3? |
| 00:48.04 | Notify | 03BRL-CAD:starseeker * 67284 brlcad/trunk/src/libbu/opt.c: whoops |
| 01:04.52 | Notify | 03BRL-CAD:starseeker * 67285 brlcad/trunk/misc/CMake/docbook.cmake.in: fix header |
| 01:12.11 | Notify | 03BRL-CAD:starseeker * 67286 brlcad/trunk/misc/CMake/DocBook.cmake: Tweak install logic |
| 01:14.48 | starseeker | brlcad: I didn't, but the compiler did |
| 01:15.01 | starseeker | brlcad: is there a shorthand syntax for that situation? |
| 01:17.35 | brlcad | int a = 3, b = 2, c = 1; |
| 01:17.41 | brlcad | (i.e., no) |
| 01:17.52 | starseeker | humph |
| 01:17.58 | brlcad | unless you separate declaration from init |
| 01:18.01 | brlcad | int a, b, c; |
| 01:18.06 | brlcad | a = b = c = 0; |
| 01:18.09 | starseeker | ah |
| 01:18.36 | brlcad | what you did is generally best practice |
| 01:18.43 | brlcad | one per line, init on declaration |
| 01:19.00 | starseeker | nods - just feels clunky/verbose, but it is what it is |
| 01:19.25 | starseeker | closing in - down to less than 900 build targets on Windows now |
| 01:19.28 | brlcad | unambiguous, explicit |
| 01:19.37 | brlcad | cool, feel any faster? |
| 01:19.41 | starseeker | yes |
| 01:19.49 | starseeker | especially when re-running configure |
| 01:19.55 | brlcad | I'll have to time my load times and build carefully before I svn up my windows image |
| 01:20.26 | starseeker | still hammering out nit-noid stuff - I'd forgotten how many moving parts all of this stuff has |
| 01:21.23 | starseeker | oddly, getting a pretty decent configure speed up on Linux - probably 'cause we were generating both HTML and MAN outputs there (Windows is generally HTML only) |
| 01:21.46 | brlcad | looks like 67279 (DocBook.cmake) is not quoted paths |
| 01:23.46 | starseeker | nods - not sure if it'll matter in that case, but won't hurt |
| 01:24.11 | Notify | 03BRL-CAD:starseeker * 67287 brlcad/trunk/misc/CMake/DocBook.cmake: Quote paths (Sean) |
| 01:24.30 | starseeker | will fire a distcheck-full once the regular distcheck behaves |
| 01:26.28 | starseeker | *really* needs to send CMake a patch that prints out configure and generation times as part of the standard CMake output... it wouldn't even be that hard... |
| 01:32.27 | starseeker | OK, regular distcheck passed |
| 01:32.37 | starseeker | crosses fingers |
| 01:37.54 | brlcad | finalized terms with a new hosting provider, we're good to move |
| 01:38.59 | *** join/#brlcad LordOfBikes (~armin@dslb-088-065-191-143.088.065.pools.vodafone-ip.de) |
| 02:00.29 | Notify | 03BRL-CAD:starseeker * 67288 (brlcad/trunk/misc/CMake/DocBook.cmake brlcad/trunk/misc/CMake/docbook.cmake.in): Looks like we might need the CMAKE_CFG_INTDIR var... getting directory generated in Windows build directory, and it doesn't appear to be coming from the cmake -P script execution. |
| 02:09.07 | Notify | 03BRL-CAD:starseeker * 67289 brlcad/trunk/misc/CMake/DocBook.cmake: quote |
| 02:09.46 | Notify | 03BRL-CAD:starseeker * 67290 brlcad/trunk/misc/CMake/DocBook.cmake: remove debug message |
| 02:40.43 | Notify | 03BRL-CAD:starseeker * 67291 brlcad/trunk/misc/CMake/DocBook.cmake: Need the extras list when odd pathnames and xsltproc don't get along |
| 02:56.29 | Notify | 03BRL-CAD:starseeker * 67292 brlcad/trunk/misc/CMake/DocBook.cmake: Only mess with CMAKE_CFG_INTDIR if we're doing multiconfig - in non-multiconfig it breaks in-src-dir. |
| 03:40.47 | *** join/#brlcad maths22 (~maths22@66-118-151-70.static.sagonet.net) |
| 03:40.47 | *** join/#brlcad maths22 (~maths22@unaffiliated/maths22) |
| 03:41.16 | maths22 | brlcad: Finally looked at IRC |
| 03:41.23 | maths22 | I like the new landing page |
| 03:41.26 | maths22 | It's pretty |
| 03:42.46 | brlcad | very much a work in progress, and I've not had time to do the next steps in over a week now |
| 03:43.38 | brlcad | need to fix up the highlights, get mailing list subscription working, fix the main menu, apply the theme to the WP install, make sure it's in sync with drupal (should be), apply theme to mediawiki... |
| 03:43.50 | brlcad | and then get docs integrated/published |
| 03:51.19 | andromeda-galaxy | brlcad, maths22: indeed. The front page markup has been much improved (thanks Guaravjeetsingh!), which should help a bit. |
| 03:51.35 | andromeda-galaxy | brlcad: did we figure out how we want to distribute the work of categorizing the gci tasks? |
| 03:56.09 | brlcad | not yet |
| 03:56.13 | brlcad | been working on getting a provider selected, agreement in place, our server moved |
| 03:56.36 | brlcad | kind of an emergency given the recent reboots ... quite possibly failing hardware |
| 03:58.06 | brlcad | anyone experienced with dynamic css transitions? |
| 03:58.26 | brlcad | want to go from the menu we see on brlcad.org to the menu we see at beta.brlcad.org when someone scrolls down |
| 04:01.06 | brlcad | even more awesome would be if the logo "walked" over the corner with the grey link pulling the red |
| 04:05.53 | andromeda-galaxy | brlcad: ah okay, that makes sense. I missed the reboots somehow, I hope everything works out! I've got some experience with css transitions, I might be able to take a look a little bit later this week... |
| 04:07.33 | *** join/#brlcad shubham_ (a5e1683b@gateway/web/freenode/ip.165.225.104.59) |
| 04:10.05 | Notify | 03BRL-CAD:starseeker * 67293 brlcad/trunk/misc/CMake/DocBook.cmake: need to set these regardless |
| 04:30.13 | *** join/#brlcad maths22 (~maths22@unaffiliated/maths22) |
| 04:43.24 | *** join/#brlcad Stragus (~alexis@modemcable090.29-19-135.mc.videotron.ca) |
| 05:30.30 | *** join/#brlcad divamgupta_ (~divamgupt@103.25.231.102) |
| 05:32.24 | *** join/#brlcad divamgupta_ (~divamgupt@103.25.231.102) |
| 05:39.39 | *** join/#brlcad divamgupta (~divamgupt@103.25.231.102) |
| 06:17.56 | *** join/#brlcad divamgupta (~divamgupt@103.25.231.102) |
| 06:54.17 | *** join/#brlcad jasleen (~jasleen@117.253.228.136) |
| 06:54.19 | *** join/#brlcad jasleen7956 (~jasleen@117.253.228.136) |
| 06:54.35 | *** join/#brlcad jasleen (~jasleen@117.253.228.136) |
| 07:45.21 | *** join/#brlcad teepee_ (~teepee@unaffiliated/teepee) |
| 08:17.59 | *** join/#brlcad divamgupta (~divamgupt@103.25.231.102) |
| 08:26.58 | *** join/#brlcad esde (esde@89.252.29.238) |
| 08:29.08 | *** part/#brlcad Guest24633 (esde@89.252.29.238) |
| 08:40.29 | *** join/#brlcad sniok (esde@89.252.29.238) |
| 08:59.48 | *** join/#brlcad merzo (~merzo@user-94-45-58-141.skif.com.ua) |
| 09:51.57 | *** join/#brlcad konrado (~konro@41.202.219.73) |
| 10:27.21 | *** join/#brlcad tandoorichick (3d0c28b1@gateway/web/freenode/ip.61.12.40.177) |
| 10:27.54 | boj | brlcad thanks :), I think I have got the main idea of plate mode, now I am working on the code and trying to write a demo... |
| 10:29.30 | boj | BTW, I am a little bit confused about implementation of NURB in brep.cpp/brep.c and nurb_*.c, they are the same or the latter one is assistant functions for the former one? |
| 10:30.44 | *** join/#brlcad teepee` (bc5c2134@gateway/web/freenode/ip.188.92.33.52) |
| 10:30.53 | *** join/#brlcad konrado (~konro@41.202.219.76) |
| 11:23.16 | *** join/#brlcad Gabriel_ (4f73ab7b@gateway/web/freenode/ip.79.115.171.123) |
| 11:23.29 | starseeker | boj: the latter is an old implementation, on its way out |
| 11:23.56 | starseeker | we need to scan that code to see if there's anything we want to migrate first (i.e. something not already available in openNURBS/libbrep) |
| 11:24.30 | starseeker | brep.c/brep.cpp, src/libbrep, and src/other/openNURBS are the key to the new implementation |
| 11:24.39 | starseeker | (i.e. where you'll want to focus) |
| 11:26.05 | boj | OK, I got it, thanks for your reminding. |
| 11:28.06 | Gabriel_ | Hi, could anyone please clarify me some things about the search command, please? |
| 11:28.50 | Gabriel_ | I've seen in the source code that there is a function which gets a database full path |
| 11:29.21 | Gabriel_ | can search produce results that are not necessarily stored in the currently opened database? |
| 11:30.14 | Gabriel_ | I mean can the user input a specific database right inside search, without opening it before? |
| 12:13.47 | *** join/#brlcad divamgupta (~divamgupt@103.25.231.102) |
| 12:25.17 | *** join/#brlcad konrado (~konro@41.202.219.67) |
| 12:41.40 | sniok | So I put some thoughts that I came up with about web site improving. https://docs.google.com/document/d/1QvNBcdj8aLhiYE8qAxuzAgqSeJTinQCab9jv9LCYTyE/edit?usp=sharing |
| 12:54.54 | *** join/#brlcad kintel (~kintel@unaffiliated/kintel) |
| 13:12.12 | *** join/#brlcad gaganjyot (~gaganjyot@122.173.175.113) |
| 13:32.05 | *** join/#brlcad teepee` (bc5c2134@gateway/web/freenode/ip.188.92.33.52) |
| 13:34.35 | *** join/#brlcad YANICK_ (~YANICK19@41.202.219.73) |
| 14:10.41 | *** join/#brlcad yorik (~yorik@191.255.88.202) |
| 14:14.31 | *** join/#brlcad YANICK_ (~YANICK19@41.202.219.77) |
| 14:23.58 | *** join/#brlcad sofat (~sofat@49.248.185.230) |
| 14:36.23 | *** join/#brlcad konrado (~konro@41.202.219.74) |
| 14:39.50 | *** join/#brlcad shubham (71c18b74@gateway/web/freenode/ip.113.193.139.116) |
| 14:43.43 | *** join/#brlcad YANICK_ (~YANICK19@41.202.219.65) |
| 14:48.06 | *** join/#brlcad d_rossberg (~rossberg@66-118-151-70.static.sagonet.net) |
| 14:52.11 | *** join/#brlcad divamgupta (~divamgupt@103.25.231.102) |
| 15:54.05 | *** join/#brlcad kvps1 (b6130785@gateway/web/cgi-irc/kiwiirc.com/ip.182.19.7.133) |
| 15:56.48 | kvps1 | anybody there |
| 15:59.14 | andromeda-galaxy | kvps1: probably... |
| 16:02.41 | kvps1 | good |
| 16:03.23 | kvps1 | so can you tell me something about the code for Geometry Conversion Library |
| 16:04.31 | andromeda-galaxy | kvps1: maybe, I'm not sure, that's not a project that I've been really involved in. If you ask here and stay on IRC, someone better qualified will probably respond at some poinit |
| 16:09.04 | kvps1 | ok |
| 16:09.18 | kvps1 | so on which project are you working |
| 16:10.25 | kvps1 | i am new in this , so it will be good if you share some code with me, regarding brl cad |
| 16:22.42 | *** join/#brlcad infobot (~infobot@rikers.org) |
| 16:22.42 | *** topic/#brlcad is Welcome to BRL-CAD! || Don't ask if someone is here, ask a better question. || We're participating in GSoC 2016! Patches required. || Major release 7.26 coming any day now... :P || New website deployed, feedback welcome! || Logs: http://ibot.rikers.org/%23brlcad/ |
| 16:39.03 | *** join/#brlcad divamgupta (~divamgupt@103.25.231.102) |
| 16:52.53 | *** join/#brlcad divamgupta__ (~divamgupt@103.25.231.102) |
| 17:00.07 | *** join/#brlcad gaganjyot (~gaganjyot@122.173.175.113) |
| 17:00.17 | *** join/#brlcad konrado (~konro@41.202.219.74) |
| 17:31.48 | *** join/#brlcad konrado (~konro@41.202.219.67) |
| 17:33.31 | *** join/#brlcad penumbra (dce39556@gateway/web/freenode/ip.220.227.149.86) |
| 17:35.00 | *** join/#brlcad anirudh96 (uid151367@gateway/web/irccloud.com/x-ypvlrpjppgjckvaf) |
| 17:35.33 | anirudh96 | hey |
| 17:36.53 | anirudh96 | i am interested in taking up benchmark performance database in gsoc can anyone help me in getting started |
| 18:12.54 | *** join/#brlcad divamgupta (~divamgupt@103.25.231.102) |
| 18:43.56 | Notify | 03BRL-CAD:n_reed * 67294 brlcad/branches/brep-debug/doc/docbook/system/implementation/en/bool_eval_development.xml: add notes on keeping track of 2D vs 3D operations |
| 19:05.13 | *** join/#brlcad tandoorichick (b64b2de1@gateway/web/freenode/ip.182.75.45.225) |
| 19:20.44 | *** join/#brlcad divamgupta (~divamgupt@103.25.231.102) |
| 19:48.42 | starseeker | and distcheck-full passes again. |
| 19:48.45 | starseeker | phew |
| 19:49.01 | starseeker | proceeds to the next thing on his "stuff to break" list... |
| 19:51.33 | Notify | 03BRL-CAD Wiki:VictorfyymktdmitCharleton * 0 /wiki/User:VictorfyymktdmitCharleton: |
| 19:51.51 | starseeker | brlcad: looks like debian is storing non-english man pages in /usr/share/man/<lang>/man# directories |
| 19:52.54 | starseeker | brlcad: should we store the html and man versions of the man pages in the same hierarchy? Really they're doing the exact same job, with the HTML version being used when the man version isn't what the client program wants/supports... |
| 20:23.05 | tandoorichick | i would like to know how data is stored in a .g file (i understand it's not as simple text- like how we store vertices, edges and faces for a single object in an OFF file or with different fileds in VRML, etc.). |
| 20:26.15 | tandoorichick | fields* |
| 20:27.04 | starseeker | tandoorichick: best place to start is probably here: http://ftp.arl.mil/mike/papers/brlcad5.0/newdb.html |
| 20:29.27 | *** join/#brlcad divamgupta_ (~divamgupt@103.25.231.102) |
| 20:29.51 | tandoorichick | starseeker: thanks but i'm not able to access it (some ports might be blocked by my ISP). is there another location where the same content is present? |
| 20:30.26 | starseeker | http://brlcad.org/wiki/File:BRL_CAD_g_format_V5.pdf might work... |
| 20:30.55 | tandoorichick | thanks a lot. :) |
| 20:31.20 | starseeker | np |
| 20:39.45 | tandoorichick | starseeker: are ARS, ARB8, ARBN and BoT are the only the polygonal/polyhedral primitives? |
| 20:46.48 | *** join/#brlcad 14WAAFWJN (~divamgupt@103.25.231.102) |
| 21:16.22 | starseeker | tandoorichick: there's also NMG |
| 21:16.48 | starseeker | DSP can be polygonal with certain settings |
| 21:16.58 | starseeker | ask can extruded sketches |
| 21:16.58 | *** join/#brlcad teepee_ (~teepee@unaffiliated/teepee) |
| 21:17.06 | starseeker | s/ask can/as can |
| 21:17.40 | starseeker | in principle you can also have a NURB composed completely of linear/planar elements |
| 21:22.39 | starseeker | suspects he broke Notify again... |
| 21:25.43 | tandoorichick | starseeker: for mesh healing i would have to be concerned with which all of them? |
| 21:25.50 | tandoorichick | bot would be one |
| 21:26.20 | tandoorichick | the arbs and ars wont have to be checked i guess |
| 21:30.34 | *** join/#brlcad divamgupta_ (~divamgupt@103.25.231.102) |
| 21:47.57 | starseeker | nods - focus on bot |
| 21:48.04 | starseeker | that'll be plenty by itself |
| 21:49.14 | *** join/#brlcad kintel (~kintel@unaffiliated/kintel) |
| 21:50.19 | *** join/#brlcad penumbra (dce39556@gateway/web/freenode/ip.220.227.149.86) |
| 21:51.45 | tandoorichick | ok got it. thanks. |
| 21:54.31 | tandoorichick | one more question. i would have a mesh healing library from scratch is it? |
| 21:55.21 | tandoorichick | have to write* |
| 22:07.26 | *** join/#brlcad gaganjyot (~gaganjyot@122.173.228.248) |
| 22:39.04 | *** join/#brlcad Notify (~notify@66-118-151-70.static.sagonet.net) |
| 22:39.07 | Notify | 03BRL-CAD:n_reed * 67295 brlcad/branches/brep-debug/doc/docbook/system/implementation/en/bool_eval_development.xml: add comments on curve traversal directions |
| 22:39.11 | Notify | 03BRL-CAD:starseeker * 67296 brlcad/trunk/src/brlman/brlman.tcl.in: Update vim type mode - combined with the tcl.vim file from http://www.vim.org/scripts/script.php?script_id=1717, finally getting reasonable indenting behavior. Update indenting. |
| 22:39.14 | Notify | 03BRL-CAD:starseeker * 67297 brlcad/trunk/misc/CMake/DocBook.cmake: Add individual targets to ALL, so we can cd into a subdirectory and build with make |
| 22:39.16 | Notify | 03BRL-CAD:starseeker * 67298 brlcad/trunk/src/brlman/brlman.tcl.in: Simplify, have the script look first for lang, then en, then in the toplevel before failing to return a man page. |
| 22:39.19 | Notify | 03BRL-CAD:starseeker * 67299 (brlcad/trunk/doc/docbook/system/man1/en/CMakeLists.txt brlcad/trunk/doc/docbook/system/man3/en/CMakeLists.txt and 3 others): Tweak all things man page so we're (in principle) ready for multiple man pages in different languages. Go with the Debian setup, which puts the en man pages in the toplevel and makes <lang>/man# subdirectories for other languages. Since we don't have any |
| 22:39.21 | Notify | non-english man pages as yet this is is hypothetical, but it should set the stage. |
| 22:39.23 | Notify | ... |
| 22:39.32 | Notify | 03BRL-CAD:starseeker * 67300 (brlcad/trunk/doc/docbook/system/README brlcad/trunk/doc/docbook/system/man1/CMakeLists.txt and 3 others): Collapse the en hierarchy, since those man pages will install that way as defaults in the install. |
| 22:39.36 | Notify | 03BRL-CAD:n_reed * 67301 brlcad/branches/brep-debug/doc/docbook/system/implementation/en/bool_eval_development.xml: notes on avoiding accumulated error; spelling |
| 23:27.39 | *** join/#brlcad teepee_ (~teepee@unaffiliated/teepee) |