| 00:01.26 | *** join/#debian asarch (~asarch@189.188.158.110) |
| 00:02.41 | *** join/#debian igitur (~Francois_@41.87.244.235) |
| 00:03.04 | architek | igitur: is there a led on this ethernet port? did you try to use a sniffer to see if any traffic is seen? |
| 00:03.59 | igitur | no led. haven't tried a sniffer, but by logging into my router I have verified that no IP has been assigned via DHCP |
| 00:03.59 | architek | igitur: debian uses /etc/network/interfaces as configuration. you can pastebin it if you want |
| 00:04.34 | *** join/#debian pappe (~pappe@109.230.236.93) |
| 00:04.47 | igitur | it's the standard DHCP interfaces... iface eth0 inet dhcp |
| 00:05.07 | architek | igitur: and auto eth0 right? |
| 00:05.35 | igitur | hmm, not that's not there |
| 00:05.50 | igitur | allow-hotplug eth0 is there, what's that? |
| 00:06.25 | architek | igitur: something for hotplugable device |
| 00:06.41 | architek | igitur: if there's not the auto line then the initscript is not going to bring itr up |
| 00:07.17 | *** join/#debian CannedCorn (~CannedCor@cpe-66-65-102-78.nyc.res.rr.com) |
| 00:07.18 | igitur | ok, lemme try. thanks |
| 00:07.27 | architek | igitur: you have auto lo? |
| 00:07.56 | architek | you need these 3 lines |
| 00:07.58 | igitur | yes |
| 00:08.22 | igitur | lo is there. my NAS services (NFS, apache, FTP, etc) start up... but only on lo |
| 00:08.31 | *** join/#debian ubiquito1s1980 (~ubiquitou@CPE-120-145-159-246.lnse2.pie.bigpond.net.au) |
| 00:09.40 | *** join/#debian Strife89 (~Strife89@207-144-19-39.cstel.net) |
| 00:10.47 | architek | network is started by /etc/init.d/network script. start action should do ifup -a which brings up all 'auto' lines in interfaces files. |
| 00:12.13 | ubiquito1s1980 | I have a Pioneer DVR-111D drive which will only burn at 4x with wodim, whereas under windows isoburn, I can burn at 16x...any logical explanation? |
| 00:12.14 | igitur | networkING? |
| 00:13.13 | architek | igitur: actually YES :) |
| 00:13.17 | *** join/#debian unkmar (~unkmar@adsl-074-183-061-041.sip.cha.bellsouth.net) |
| 00:13.51 | unkmar | I'm a cli email dummy, so enlighten me. |
| 00:13.55 | igitur | and log entries for /etc/init.d/networking are written to syslog? |
| 00:14.06 | unkmar | I have my fetchmail and mutt currently setup and all works great. |
| 00:14.24 | unkmar | However, I am about to reinstall and I do not wish to lose my mail and email settings. |
| 00:14.39 | *** join/#debian Strife1989 (~Strife89@207.144.201.128) |
| 00:14.40 | *** join/#debian garme (~garme@201009045095.user.veloxzone.com.br) |
| 00:14.51 | unkmar | more importantly, I moved the /var/mail/user file to another folder and am concerned that fetchmail won't know where to find it. |
| 00:15.04 | unkmar | I informed .muttrc where the new location is. |
| 00:15.51 | unkmar | will that be enough? |
| 00:17.30 | unkmar | in fact, I already KNOW that it has fouled up. |
| 00:17.32 | unkmar | Dang it. |
| 00:18.16 | somiaj | isn't the user info for fetchmail contained in a .fetcmhamilrc or whatnot |
| 00:19.35 | unkmar | somiaj: user info? yes. file location? didn't see it in there. |
| 00:19.40 | *** join/#debian drinkycrow (~dead@c-68-58-76-30.hsd1.il.comcast.net) |
| 00:19.55 | *** join/#debian igitur (~Francois_@41.87.244.235) |
| 00:20.15 | *** join/#debian hardnrgg (~roycable@124-168-96-92.dyn.iinet.net.au) |
| 00:21.40 | *** join/#debian t4lk3rs (~heliar@aaax198.neoplus.adsl.tpnet.pl) |
| 00:23.58 | *** join/#debian eSa| (~esa@host108-234-dynamic.245-95-r.retail.telecomitalia.it) |
| 00:24.00 | *** mode/#debian [+l 1108] by debhelper |
| 00:25.05 | *** join/#debian computerX (~computerX@41.214.250.135) |
| 00:25.44 | computerX | on linux without a GUI. |
| 00:25.46 | computerX | how to connect to the internet with a 3G dongle ? |
| 00:27.16 | *** join/#debian popkill (~popkill@unaffiliated/popkill) |
| 00:27.29 | *** join/#debian compy386 (~sh333ts@rrcs-70-61-235-81.central.biz.rr.com) |
| 00:28.26 | *** join/#debian trifolio6 (~h@62.43.53.100.dyn.user.ono.com) |
| 00:30.37 | *** join/#debian asarch (~asarch@187.171.165.26) |
| 00:30.47 | unkmar | well, if it works, it works. if not, I'll not have email for a week, maybe 2. |
| 00:30.51 | *** part/#debian unkmar (~unkmar@adsl-074-183-061-041.sip.cha.bellsouth.net) |
| 00:34.39 | somiaj | computerX: probabaly depends on how the drivers work. Do you get an interface that you can just use ifconfig with? |
| 00:35.01 | somiaj | computerX: once you plug it in, ifconfig -a, will list all interfaces you have |
| 00:36.53 | *** part/#debian computerX (~computerX@41.214.250.135) |
| 00:40.45 | *** join/#debian th0r (~steve@rrcs-24-73-135-207.se.biz.rr.com) |
| 00:41.38 | th0r | I just updated my debian vm install, and forgot I had an old linux drive plugged into the usb slot. If I just run 'update-grub again will it eliminate the listing for /dev/sdb1? |
| 00:41.46 | *** join/#debian DammitJim (~me@99-75-56-77.lightspeed.dybhfl.sbcglobal.net) |
| 00:41.55 | *** join/#debian wo0f (~wo0f@5add9201.bb.sky.com) |
| 00:42.41 | somiaj | th0r: it should, update-grub just runs a series of scripts to create the grub config file |
| 00:42.50 | *** join/#debian dspace (~dspace@74-131-161-158.dhcp.insightbb.com) |
| 00:43.14 | th0r | somiaj: I thought so, but haven't messed with grub in a while...not even sure if debian is using grub2 or the original <smile> |
| 00:43.43 | *** join/#debian asarch (~asarch@187.132.115.89) |
| 00:43.55 | somiaj | th0r: grub2 |
| 00:44.01 | somiaj | th0r: since squeeze. |
| 00:44.17 | *** join/#debian nutron (~dserban@24.67.96.21) |
| 00:45.09 | th0r | somiaj: yup...I am running squeeze. Thanks |
| 00:45.35 | somiaj | th0r: I think grub1 is still around as an option, but its not default. |
| 00:45.56 | *** join/#debian Guest22956 (~Ard1t@213.207.33.72) |
| 00:49.06 | *** join/#debian CannedCorn (~CannedCor@cpe-66-65-102-78.nyc.res.rr.com) |
| 00:49.08 | *** join/#debian SpeedyG_ (~speedyg@ip9135cd7a.speed.planet.nl) |
| 00:51.25 | *** join/#debian oldtopman (~oldtopman@71-33-182-174.hlrn.qwest.net) |
| 00:51.25 | *** join/#debian oldtopman (~oldtopman@unaffiliated/oldtopman) |
| 00:52.41 | *** part/#debian th0r (~steve@rrcs-24-73-135-207.se.biz.rr.com) |
| 00:53.15 | acu | I want to install remotely and interactively (internet) a system from the bare metal - the system is wired to the internet and I can assign a static IP - what would be best method ? |
| 00:54.00 | *** mode/#debian [+l 1099] by debhelper |
| 00:55.10 | *** join/#debian Se-bash (~seba@unaffiliated/se-bash) |
| 00:57.07 | *** join/#debian debsan (~debsan@190.245.74.16) |
| 00:59.50 | somiaj | acu: the method with a livecd running sshd and debootstrap didn't work for you? |
| 01:00.33 | somiaj | acu: you need to get a base system + sshd installed and then the rest is easy. Could the remote place go though installing the base system for you? |
| 01:01.26 | *** join/#debian lyte (~lyte@114-198-88-98.dyn.iinet.net.au) |
| 01:01.26 | *** join/#debian lyte (~lyte@unaffiliated/neerolyte) |
| 01:02.50 | *** join/#debian TheDreamer (~Youri@2001:0:5ef5:79fd:14f5:f856:ac5e:f7d7) |
| 01:03.01 | *** join/#debian wizoz (~wizard@91.198.48.20) |
| 01:04.01 | *** mode/#debian [+l 1092] by debhelper |
| 01:04.58 | *** join/#debian Jayro (~jarred@142.68.36.184) |
| 01:05.28 | *** join/#debian mentor (~mentor@80.65.241.16) |
| 01:05.32 | Jayro | Hello, I have both a built in mic, and an external one and i cant get sound recorder to record from either, everythin in alsamixer is turned up, any ideas? |
| 01:05.34 | wizoz | Could anyone of you recommend a graphing managment tool, e.g. cachi which should be easier to maininace. |
| 01:05.42 | wizoz | and set up. |
| 01:07.08 | somiaj | wizoz: what do you mean by graphing managment tool? |
| 01:08.14 | Jayro | anyone |
| 01:08.15 | Jayro | ? |
| 01:11.26 | *** join/#debian Guest81990 (~Ard1t@213.207.33.72) |
| 01:12.00 | *** join/#debian Sweetshark (~bjoern@canonical/sweetshark) |
| 01:14.14 | *** join/#debian liable (~liable@101.171.1.149) |
| 01:14.14 | *** join/#debian liable (~liable@unaffiliated/liable) |
| 01:15.46 | Crypticfortune | DSFG question: can someone get a look at the copyright for libsvm2 (http://paste.debian.net/138988/ ) and tell me, does this actually meet DSFG requirements? it's in lenny+squeeze/main, but as I interpret that copyright, anything derived from libsvm2 would have to be copyright Chih-Chung Chang...? Is that ok by DSFG? |
| 01:15.54 | *** join/#debian xyan (xyan@l.uni.cx) |
| 01:16.16 | Crypticfortune | s/DSFG/DFSG/g |
| 01:17.43 | rww | Crypticfortune: that appears to be pretty much the 3-clause BSD license, which is DFSG free |
| 01:18.16 | *** join/#debian lyte (~lyte@unaffiliated/neerolyte) |
| 01:20.08 | *** join/#debian Miesco_ (~mugsy@d67-193-122-59.home3.cgocable.net) |
| 01:20.20 | rww | (specifically, it's linked from http://www.debian.org/legal/licenses/ as "Modified BSD License (common)" |
| 01:20.23 | rww | ) |
| 01:20.44 | *** join/#debian phogg (~phogg@173-10-190-217-BusName-washingtonDC.hfc.comcastbusiness.net) |
| 01:21.25 | Crypticfortune | rww: ah, thanks very much. I'm still confused by that license though. does that mean any derivations would still be copyright Chih-Chung Chang? |
| 01:22.57 | acu | somiaj: I will attempt - it seem to me too many neurons where required - if at boot of the installer I could have got some ssh or some interaction - they could install a base system - the problem is I want to configure the installing partitions etc - and once it is installed I am kind of limited - but I have to see - perhaps a live system with vnc or ssh will do it |
| 01:23.05 | Jayro | could someone help me with my mic? I have a pretty girl waiting for me to go on skype |
| 01:23.17 | *** join/#debian luist__ (~luist@189.59.130.95.dynamic.adsl.gvt.net.br) |
| 01:23.33 | tensorpudding | seriously? |
| 01:23.42 | *** join/#debian daniel-s (~daniel-s@r180-216-41-71.cpe.vividwireless.net.au) |
| 01:23.45 | Jayro | i am being honest here. |
| 01:23.50 | somiaj | acu: well that is why I suggested a livecd + debootstrap. If the live cd has all the tools you need, you can set up all the partitions, etc, install a kernel, grub, and the likes |
| 01:25.43 | tensorpudding | skype is finicky |
| 01:25.49 | tensorpudding | it might not be a supported mic |
| 01:25.59 | Jayro | sound recordor dosnt ssee the input either |
| 01:27.31 | tensorpudding | you should figure out what model it is |
| 01:27.40 | tensorpudding | is it usb? |
| 01:33.28 | acu | somiaj: I do not know why I have a fear of the unknown - debootstrap chroot etc :) |
| 01:34.00 | *** mode/#debian [+l 1082] by debhelper |
| 01:35.08 | *** join/#debian martianlobster (~csims@nmd.sbx08244.charlsc.wayport.net) |
| 01:35.42 | somiaj | acu: well if they put in a livecd with sshd running and you can ssh inthere, debootstrap and chroot is easy. Once your in the chroot its easy to. The only 'catch' is making sure your work boots afterwards |
| 01:36.02 | martianlobster | how can I tell which device driver I am using for my hardware clock? I need to use the rtc-cmos driver, in order to get access to the high precession clock. |
| 01:37.19 | somiaj | martianlobster: dmesg | grep rtc (my default debian kernel shows rtc_cmos) |
| 01:37.28 | martianlobster | thanks! |
| 01:37.33 | *** join/#debian ajikeshi__ (~ajikeshi@unaffiliated/ajikeshi) |
| 01:37.36 | somiaj | martianlobster: you can also parse, that should give you any message of modules loaded |
| 01:40.57 | *** join/#debian konsumer (~konsumer@p5B05B271.dip.t-dialin.net) |
| 01:45.03 | karlpinc | acu: The installer has a ssh option in expert mode. You do need to go through a few questions about keyboard and stuff first though. See the install guide. |
| 01:46.17 | *** join/#debian LegalEagle (~chip@pdpc/supporter/student/legaleagle) |
| 01:52.48 | *** join/#debian asias (~asias@184.82.19.92) |
| 01:52.56 | *** join/#debian unkmar (~unkmar@adsl-074-183-061-041.sip.cha.bellsouth.net) |
| 01:53.15 | unkmar | yep |
| 01:53.30 | *** join/#debian Guest22956 (~Ard1t@213.207.33.72) |
| 01:53.46 | unkmar | Trying to install. I have network access. Can ping the mirrors, and I get errors reaching the mirror during the install. |
| 01:54.31 | *** join/#debian dddbmt (~dddbmt@ip1.c356.ksv130.cust.comxnet.dk) |
| 01:54.33 | unkmar | Any suggestions better than a brain wipe so I won't remember how painful installs can be? |
| 01:54.42 | *** join/#debian AlecTaylor (~chatzilla@unaffiliated/alectaylor) |
| 01:55.14 | acu | karlpinc: so I can ssh remotely ? I am going now through install |
| 01:55.16 | AlecTaylor | Can I do an package search via CLI? - so if I was searching for anything containing "libjpeg" it'd return the list available? |
| 01:55.17 | unkmar | and I have attempted several different mirrors. such as ftp.us.debian.org |
| 01:55.34 | *** join/#debian PhoenixSTF (~rudi@78.29.150.91) |
| 01:55.40 | unkmar | AlecTaylor: apt-cache search libjp |
| 01:55.53 | unkmar | AlecTaylor: or aptitude search libjp |
| 01:56.27 | AlecTaylor | Thanks! :] |
| 01:57.09 | unkmar | AlecTaylor: the kinds of results are somewhat different. |
| 01:58.20 | *** join/#debian urlin2u (~urlin2u@unaffiliated/urlin2u) |
| 01:58.54 | *** join/#debian Guest14416 (~mentor@217.28.0.103) |
| 01:58.57 | *** join/#debian Fragggy (~Fragggy@bitsplit.de) |
| 01:59.05 | dddbmt | I have dowloaded some C source code and want to compile it. Does it matter which directory the files are placed in? If so, which directory would be a good choice? |
| 01:59.06 | *** join/#debian maik (~maik@76.178.145.78) |
| 01:59.46 | AlecTaylor | dddbmt: Just put it in your home dir |
| 01:59.55 | AlecTaylor | Or in /opt/ |
| 02:01.04 | *** join/#debian lyte (~lyte@220-253-27-35.VIC.netspace.net.au) |
| 02:01.04 | *** join/#debian lyte (~lyte@unaffiliated/neerolyte) |
| 02:01.40 | dddbmt | AlecTaylor, thank you. Is your answer different if I say that it should be accessable(?) from PHP on the webserver. <?php exec("cmd");?> |
| 02:02.41 | AlecTaylor | -_- |
| 02:02.49 | AlecTaylor | php exec should die |
| 02:02.56 | AlecTaylor | But yes, my answer would change |
| 02:03.14 | AlecTaylor | make sure you set the permissions correctly... in fact, I'd recommend adding a separate mountpoint for it |
| 02:03.25 | AlecTaylor | just to be on the safe side |
| 02:05.26 | *** join/#debian nasofe (~nasofe@72.52.65.20) |
| 02:05.36 | dddbmt | Thanks! I'll check the permissions. About exec your probably right, I've just been told to make it happen ;) |
| 02:05.47 | AlecTaylor | more info! |
| 02:06.01 | *** join/#debian sauvin (~sauvin@about/linux/staff/sauvin) |
| 02:07.36 | *** join/#debian lyte (~lyte@unaffiliated/neerolyte) |
| 02:11.00 | *** join/#debian despoil (debberup@75.11.9.194) |
| 02:11.33 | AlecTaylor | How do I fix this unmet dependency error? - http://pastebin.com/jURubKkU |
| 02:14.09 | *** join/#debian dgm_077 (~dgm_077@port-92-206-56-41.dynamic.qsc.de) |
| 02:14.15 | peterrooney | AlecTaylor: unhold the package? or apt-get --ignore-hold, if I understand correctly. |
| 02:14.34 | *** join/#debian propman (~propman@S01060017318c9a2b.du.shawcable.net) |
| 02:14.36 | peterrooney | AlecTaylor: following my advice blindly could break your system more. |
| 02:18.00 | *** join/#debian Talon_ (~Talon_@50.51.3.102) |
| 02:18.02 | *** join/#debian cygnus011 (~janik@xdsl-83-150-84-65.nebulazone.fi) |
| 02:18.08 | *** join/#debian Ex-Opesa (~Ex-Opesa@unaffiliated/ex-opesa) |
| 02:18.38 | *** join/#debian popkill (~popkill@unaffiliated/popkill) |
| 02:18.55 | Talon_ | is there a tray app for gnome2 that just checks if you have mail? I'd like mail notifications but I use thunderbird. I don't wanna haveto leave it open all the time... |
| 02:19.44 | *** join/#debian gusnan (~gusnan@h238n2c1o269.bredband.skanova.com) |
| 02:20.58 | *** join/#debian hardnrgg (~roycable@124-168-96-92.dyn.iinet.net.au) |
| 02:21.44 | *** join/#debian blackest_mamba (~blackest_@c-98-220-201-219.hsd1.il.comcast.net) |
| 02:23.23 | *** join/#debian DimmuR (~DimmuR@unaffiliated/dimmur) |
| 02:24.05 | *** join/#debian Veg-Unit (~Veg-Unit@178.73.194.197) |
| 02:24.31 | *** join/#debian rrrreimer (~rrrreimer@krsn-5d800911.pool.mediaWays.net) |
| 02:24.49 | dddbmt | Let's say I've just installed a C program from source. By "make" and "make install". Now I've made a minor change in the source - how can I "make" it again, and get rid of the old one? |
| 02:25.33 | Talon_ | make clean? |
| 02:25.56 | AlecTaylor | ;) |
| 02:26.05 | *** join/#debian SterNiX (~LessIsMor@unaffiliated/nu253r/x-0655220) |
| 02:27.03 | dddbmt | Talon_, as simple as that? I've never installed from source before. |
| 02:27.06 | tensorpudding | no |
| 02:27.14 | tensorpudding | make clean just cleans locally |
| 02:27.26 | tensorpudding | uninstalling is a lot harder |
| 02:27.32 | simonlnu | make |
| 02:27.33 | tensorpudding | there might be a rule for it, but it doesn't seem likely |
| 02:27.56 | *** join/#debian fty (~f@90.Red-79-152-55.dynamicIP.rima-tde.net) |
| 02:27.58 | simonlnu | then make install again; the first run will catch the mtime change |
| 02:28.05 | Talon_ | might be simple to figure out what it copies where by examining the rules in the Makefile |
| 02:28.07 | tensorpudding | yes, that will overwrite |
| 02:28.09 | tensorpudding | though |
| 02:28.15 | *** join/#debian Transformer (~Transform@ool-4a59e397.dyn.optonline.net) |
| 02:28.15 | fty | hi |
| 02:28.20 | tensorpudding | if files existed in the first install that didn't exist in the second they will still exist |
| 02:28.28 | *** part/#debian Transformer (~Transform@ool-4a59e397.dyn.optonline.net) |
| 02:28.29 | fty | is supported kde 4.7 on debian? |
| 02:28.35 | simonlnu | nowadays it's getting harder to find a project using autoconf that doesn't have an uninstall target |
| 02:28.35 | *** part/#debian amero (~amero@unaffiliated/amero) |
| 02:28.37 | dddbmt | simonlnu, so if I just do "make" and "make install" again, it'll override the existing? |
| 02:28.47 | simonlnu | fty: it's not in the repos yet so no |
| 02:29.13 | fty | simonlnu: a manual compilation will fail? |
| 02:29.51 | simonlnu | what you do to your machine is your business but i'd wait. if you're using stable (squeeeze) you'll never see it. |
| 02:30.07 | fty | i'm on unstable |
| 02:30.12 | *** join/#debian Anderson_Belo_Ma (~Anderson_@189.81.34.114) |
| 02:30.56 | simonlnu | then you should know it'll be there in due time. |
| 02:31.38 | fty | what's the problem for this delay? |
| 02:31.49 | simonlnu | ask the kde team |
| 02:32.32 | simonlnu | !snss |
| 02:32.43 | simonlnu | dpkg: test |
| 02:32.44 | dpkg | Test failed. |
| 02:32.49 | simonlnu | !sns |
| 02:32.49 | dpkg | Shiny New Shit Syndrome is a serious disorder, which usually breaks out into an epidemic every time something new is released. If you have SNS, ask me about <backports> and <ssb>; these are better options than upgrading to <testing> because it is a <moving target>. |
| 02:33.08 | *** join/#debian BlueZomig (~dash@24-117-199-135.cpe.cableone.net) |
| 02:33.11 | BlueZomig | hello |
| 02:33.40 | *** join/#debian ib-mobile (~quassel@ns2.webconx.net) |
| 02:33.41 | *** join/#debian ib-mobile_ (~quassel@ns2.webconx.net) |
| 02:33.44 | tensorpudding | i have SNS too, one reason i don't stay with debian very long on the desktop |
| 02:34.40 | *** join/#debian xyan (xyan@l.uni.cx) |
| 02:35.28 | *** join/#debian Guest81990 (~Ard1t@213.207.33.72) |
| 02:35.58 | *** join/#debian phogg (~phogg@173-10-190-217-BusName-washingtonDC.hfc.comcastbusiness.net) |
| 02:38.09 | *** join/#debian eSa| (~esa@host236-232-dynamic.248-95-r.retail.telecomitalia.it) |
| 02:39.07 | *** join/#debian DimmuR (~DimmuR@unaffiliated/dimmur) |
| 02:39.19 | *** join/#debian abaddon (nox@immunix.net) |
| 02:39.30 | *** join/#debian adam8157 (~adam@unaffiliated/adam8157) |
| 02:41.32 | *** join/#debian lyte (~lyte@114-198-93-192.dyn.iinet.net.au) |
| 02:41.32 | *** join/#debian lyte (~lyte@unaffiliated/neerolyte) |
| 02:41.34 | *** join/#debian popkill (~popkill@unaffiliated/popkill) |
| 02:42.18 | *** join/#debian noahfx (~noahfx@190.148.139.192) |
| 02:46.20 | *** join/#debian newyork (~newyork@p3E990D21.dip.t-dialin.net) |
| 02:46.29 | AlecTaylor | How do I fix this unmet dependency error? - http://pastebin.com/jURubKkU |
| 02:47.25 | *** join/#debian cakeb0ss (nightowl@213.155.190.139) |
| 02:47.56 | *** join/#debian bier (~bier@p57A66612.dip.t-dialin.net) |
| 02:47.57 | *** join/#debian bier|tp (~bier@p57A66612.dip.t-dialin.net) |
| 02:49.30 | *** join/#debian K_Dallas (~Korbain@cpe-24-210-246-135.woh.res.rr.com) |
| 02:51.56 | *** join/#debian omeddragon (~ome@pool-71-163-38-16.washdc.fios.verizon.net) |
| 02:52.18 | *** join/#debian cakeb0ss (nightowl@213.155.190.139) |
| 02:52.51 | *** join/#debian kkreamer (~Kevin@cpe-069-134-011-061.nc.res.rr.com) |
| 02:53.38 | *** join/#debian Datz (~datz@76-202-150-122.lightspeed.milwwi.sbcglobal.net) |
| 02:54.01 | *** mode/#debian [+l 1075] by debhelper |
| 02:54.01 | *** join/#debian kkreamer (~Kevin@cpe-069-134-011-061.nc.res.rr.com) |
| 02:54.08 | *** join/#debian mouche (~mouche@unaffiliated/mouche) |
| 02:54.38 | *** join/#debian cakeb0ss (nightowl@213.155.190.139) |
| 02:55.19 | *** join/#debian freakazoid0223 (~matt@pool-173-49-209-91.phlapa.fios.verizon.net) |
| 02:56.11 | *** join/#debian thisthat (~im@74-139-35-225.dhcp.insightbb.com) |
| 02:56.23 | somiaj | AlecTaylor: what version of debian? |
| 02:56.30 | Datz | hello. I was wondering if wheezy uses gnome2 or gnome3? |
| 02:56.41 | kkreamer | anyone else have a issue when upgrading sid, where the initramfs is b0rked? |
| 02:56.45 | Datz | or are there multiple packages? |
| 02:57.05 | kkreamer | gnome2 |
| 02:57.10 | rww | Datz: It's currently transitioning to GNOME 3. See http://www.0d.be/debian/debian-gnome-3.0-status.html |
| 02:57.17 | somiaj | Datz: wheezy will eventally be using gnome3. Its under transition right now |
| 02:57.29 | somiaj | kkreamer: sid breaks thing, if 'anyone' has issues they report them to the bts |
| 02:57.56 | somiaj | AlecTaylor: have you tried to install the missing dependency, 'apt-get install libjpeg-dev' |
| 02:58.20 | thisthat | my apt-mirror said it was going to download 60 gigs |
| 02:58.27 | thisthat | now i can't get it to download anything |
| 02:58.47 | kkreamer | somiaj: well, yeah ... after I'm able to get that far, I'll go report it to the BTS :-) |
| 02:59.20 | somiaj | thisthat: do you want to mirror all arch? Or just a paticular one? (you can limit the size that way). Though maybe give more info as to errors, info as why it isn't downloading things |
| 02:59.21 | Datz | rww, somiaj: ah I see. thanks |
| 02:59.25 | fty | anyone knows any gui for cpufreq? |
| 02:59.29 | unkmar | eh, I got AROUND my problem. I have others now, but I will avoid them for the moment. |
| 02:59.36 | *** part/#debian unkmar (~unkmar@adsl-074-183-061-041.sip.cha.bellsouth.net) |
| 02:59.40 | thisthat | somiaj i would like to mirror all of i386 |
| 02:59.56 | thisthat | the only info i am getting is |
| 03:00.10 | thisthat | 0.0 bytes in 0 files and 0 directories can be freed...run /mirror/var/clean.sh for this purpose |
| 03:00.25 | somiaj | thisthat: afiak you can configure apt-mirror to only mirror that (Should limit the size of the mirror), on top of that decide if you want to mirror src packages or just binaries. |
| 03:00.39 | thisthat | when i run that clean.sh script it removes nothing and just says done |
| 03:01.07 | karlpinc | thisthat: Or you can go the website page at debian.org that describes how to mirror using their unpackaged tool. |
| 03:01.08 | TrueDD | Good night everybody |
| 03:01.21 | thisthat | i just know it initially said it was going to use 60 gigs of space, it has used only 9 gigs and i feel it is not done downloading |
| 03:01.42 | thisthat | i would entertain apt-mirror alternatives |
| 03:02.04 | *** join/#debian omeddragon (~ome@pool-71-163-38-16.washdc.fios.verizon.net) |
| 03:02.11 | karlpinc | !tell thisthat about mirror |
| 03:04.46 | kkreamer | somiaj: actually, thanks for the pointer... it looks like #337176 is my problem |
| 03:04.55 | peterrooney | mirroring seem like a perfect application for bittorrent |
| 03:06.14 | thisthat | indeed |
| 03:06.34 | *** join/#debian garme (~garme@201009045095.user.veloxzone.com.br) |
| 03:06.39 | Datz | Has there been any talk of gnome2 fork "Mate"? |
| 03:06.53 | thisthat | i just want a machine that will keep all the i386 repo up to date automatically and allow access to my network |
| 03:07.13 | thisthat | so i don't have to wait when building something |
| 03:07.21 | *** join/#debian albech (~thomas@61.7.177.18) |
| 03:08.25 | somiaj | Datz: In what sense? afiak debian isn't planning on supporting gnome2 after squeeze, due to the large size of the project and no upstream support. |
| 03:09.35 | Datz | somiaj: right. but the mate project would be supported by its own devs I'd assume. |
| 03:09.47 | Datz | I wouldn;t expect debian to maintain it. |
| 03:10.04 | Datz | I'm just wondering, as I'm not too fond of gnome3 |
| 03:10.13 | Kamping_Kaiser | Datz: i've not seen any ITP for a gnome fork, nor discussion on debian-devel |
| 03:10.26 | Kamping_Kaiser | Datz: the gnome team list archive may have discussion; you'd have to look there |
| 03:10.27 | *** join/#debian DimmuR (~DimmuR@unaffiliated/dimmur) |
| 03:10.36 | somiaj | Datz: well squeeze will be supported by debian for at least 2 years, by then once wheezy stabilizes a lot of the gnome3 stuff may hopefully be worked out. |
| 03:11.10 | Datz | ah, I see. |
| 03:11.18 | somiaj | Datz: but my suggestion is stick with squeeze and wait to see what happens with gnome3. When gnome2 came out it had lots of the same issues until the bugs got worked out. |
| 03:11.20 | Datz | Kamping_Kaiser: I'll have a look. thanks |
| 03:11.50 | rww | yeah, I'm doing what somiaj said, personally. |
| 03:11.55 | Datz | somiaj: I see. That's what I plan on doing. :) |
| 03:12.09 | Kamping_Kaiser | at least 3 will have been out for some time before debian releases with it |
| 03:12.13 | *** join/#debian Devon_ (~chatzilla@63.214.236.169) |
| 03:13.44 | *** join/#debian lwizardl (~lwizardl@c-68-62-80-172.hsd1.mi.comcast.net) |
| 03:14.31 | *** join/#debian maxd (maxd@213.180.96.4) |
| 03:14.44 | Datz | that's true. I guess linux mint reworked gnome2 quite a bit, maybe gnome3 can be reworked in some way |
| 03:15.00 | *** join/#debian popkill (~popkill@unaffiliated/popkill) |
| 03:15.15 | *** join/#debian omeddragon (~ome@pool-71-163-38-16.washdc.fios.verizon.net) |
| 03:16.57 | *** join/#debian Guest22956 (~Ard1t@213.207.33.72) |
| 03:17.42 | *** join/#debian Rusty1 (~Rusty1@cpe-74-67-45-166.nycap.res.rr.com) |
| 03:17.48 | *** join/#debian gasgesgos (~apples@97-112-210-67.frgo.qwest.net) |
| 03:17.52 | *** join/#debian ajaykools (~ajay@117.192.194.17) |
| 03:21.42 | *** join/#debian Bry8Star (~Bry8Star@gateway/tor-sasl/bry8star) |
| 03:29.11 | *** join/#debian drinkycrow (~dead@c-68-58-76-30.hsd1.il.comcast.net) |
| 03:30.18 | *** join/#debian atmark (~atmark@ch4.cproxy.cz) |
| 03:30.25 | *** join/#debian atmark (~atmark@fedora/atmark) |
| 03:32.16 | *** join/#debian MmikeDOMA (~msplival@cpe-188-129-73-242.dynamic.amis.hr) |
| 03:33.50 | *** join/#debian omeddragon (~ome@pool-71-163-38-16.washdc.fios.verizon.net) |
| 03:36.49 | *** join/#debian mentor (~mentor@217.28.0.103) |
| 03:37.10 | *** join/#debian mentor (~mentor@unaffiliated/mentor) |
| 03:37.18 | *** join/#debian omeddragon (~ome@pool-71-163-38-16.washdc.fios.verizon.net) |
| 03:37.28 | *** join/#debian s3phir0th115 (~s3phir0th@c-71-63-35-155.hsd1.va.comcast.net) |
| 03:40.22 | *** join/#debian Okazaki-san (~Ota-kun@adsl-76-200-149-227.dsl.pltn13.sbcglobal.net) |
| 03:44.22 | *** join/#debian bregma (~stephenw@74.198.165.55) |
| 03:46.17 | *** join/#debian eSa| (~esa@host219-25-dynamic.244-95-r.retail.telecomitalia.it) |
| 03:47.08 | *** join/#debian pickcoder (~madmax@pdpc/supporter/active/pickcoder) |
| 03:47.26 | *** join/#debian Draecos (~Draecos@203-206-42-146.dyn.iinet.net.au) |
| 03:53.27 | *** join/#debian Guest81990 (~Ard1t@213.207.33.72) |
| 03:53.33 | Datz | <PROTECTED> |
| 03:55.53 | *** part/#debian thisthat (~im@74-139-35-225.dhcp.insightbb.com) |
| 03:56.10 | *** join/#debian fisted (~fisted@unaffiliated/fisted) |
| 03:57.19 | *** join/#debian fty (~f@138.Red-79-153-75.dynamicIP.rima-tde.net) |
| 03:57.22 | *** join/#debian s0d0 (~sod@host81-141-48-29.wlms-broadband.com) |
| 03:58.44 | *** join/#debian MSTRCNVS (~rafael@189.120.134.61) |
| 03:59.19 | *** join/#debian luist_ (~luist@189.59.130.95.dynamic.adsl.gvt.net.br) |
| 03:59.39 | *** join/#debian testi (~quassel@84-72-125-244.dclient.hispeed.ch) |
| 04:00.21 | fty | I wrote this script: http://paste.pocoo.org/show/496759/, then I chmod with 755 and I make the script run at boot time with: update-rc.d change_cpufreq defaults. The script works fine executing manually but don't starts at boot. I'm missing something? |
| 04:00.58 | MSTRCNVS | I've downloaded a firefox package from mozilla's website, now I'm moving it to /opt and trying to execute /opt/firefox/firefox, but it says "file does not exist", but it does exist... |
| 04:01.11 | *** join/#debian lyte (~lyte@unaffiliated/neerolyte) |
| 04:01.42 | Kamping_Kaiser | fty: yes, you are |
| 04:01.50 | Kamping_Kaiser | specifically, what rulevels to start/stop at |
| 04:01.51 | *** join/#debian arran-g (~arran@host109-158-84-188.range109-158.btcentralplus.com) |
| 04:01.53 | *** join/#debian aidalgol (~user@114-134-8-121.rurallink.co.nz) |
| 04:02.08 | *** join/#debian blackest_mamba (~blackest_@c-98-220-201-219.hsd1.il.comcast.net) |
| 04:02.44 | *** join/#debian garme (~garme@201009056061.user.veloxzone.com.br) |
| 04:03.18 | *** join/#debian jaytaph (~jaytaph@c-24-6-39-102.hsd1.ca.comcast.net) |
| 04:03.53 | fty | Kamping_Kaiser: what's the way to specify that? |
| 04:04.25 | *** join/#debian asias (~asias@184.82.19.92) |
| 04:04.59 | *** join/#debian SashaNeko (~SashaNeko@68-190-132-96.dhcp.eucl.wi.charter.com) |
| 04:05.01 | Kamping_Kaiser | fty: check the man page, i'm guessing rom my quck skim adding 'defaults' to the end of your command |
| 04:06.18 | *** join/#debian sencha (~sencha@184-218-174-112.pools.spcsdns.net) |
| 04:10.45 | *** join/#debian krux (~krux@221-134.186-72.tampabay.res.rr.com) |
| 04:12.45 | *** join/#debian TheDreamer (~Youri@2001:0:5ef5:79fd:1878:f856:ac5e:f7d7) |
| 04:13.30 | *** join/#debian JurassicJon (~textual@d24-141-38-66.home.cgocable.net) |
| 04:14.51 | *** join/#debian arvind_khadri (~arvind@unaffiliated/arvind-khadri/x-2237230) |
| 04:17.55 | *** join/#debian allisterb (~allisterb@190.213.181.74) |
| 04:19.44 | *** join/#debian metalspike (~metalspik@222-155-195-4.jetstream.xtra.co.nz) |
| 04:20.29 | *** join/#debian echoznc (~echoznc@199.167.199.245) |
| 04:20.57 | *** join/#debian nasofe (~nasofe@72.52.65.20) |
| 04:23.07 | *** join/#debian atmark (~atmark@fedora/atmark) |
| 04:24.40 | *** join/#debian MUILTFN (~MLINTH@adsl-98-80-213-111.mcn.bellsouth.net) |
| 04:26.18 | *** join/#debian MUILTFN (~MLINTH@adsl-98-80-213-111.mcn.bellsouth.net) |
| 04:27.04 | *** join/#debian Kaede (~Kaede@unaffiliated/kaede) |
| 04:29.59 | *** join/#debian AgentC_ (~quassel@dyndsl-085-016-232-170.ewe-ip-backbone.de) |
| 04:32.59 | daniel-s | has anyone else had issues with animated .gifs and squeeze? |
| 04:33.18 | *** join/#debian napping (~brandon@c-98-228-139-19.hsd1.il.comcast.net) |
| 04:35.09 | tensorpudding | issues with them where? |
| 04:35.24 | tensorpudding | in eog? in iceweasel? |
| 04:35.51 | *** join/#debian drinkycrow (~dead@c-68-58-76-30.hsd1.il.comcast.net) |
| 04:36.29 | *** join/#debian aindilis (~aindilis@173-165-36-107-Illinois.hfc.comcastbusiness.net) |
| 04:37.11 | *** join/#debian iiiii (~iiiii@unaffiliated/wongbater) |
| 04:37.21 | daniel-s | anywhere that I open them |
| 04:37.33 | daniel-s | in any web browser |
| 04:37.34 | napping | I am having trouble with apt-file. sudo apt-file update downloaded an index, but "apt-file search bash" and similar commands do not return any results |
| 04:37.43 | daniel-s | or in the regular image view app on Gnome |
| 04:37.53 | tensorpudding | odd |
| 04:37.57 | tensorpudding | what issue |
| 04:39.27 | *** join/#debian Guest22956 (~Ard1t@213.207.33.72) |
| 04:40.07 | *** join/#debian icedtea (~paul@76.226.21.84) |
| 04:40.18 | *** join/#debian eikenberry (~jae@c-24-22-0-175.hsd1.or.comcast.net) |
| 04:40.48 | iiiii | i wonder if apt-file db messed up somehow.... did you try apt-file purge |
| 04:42.58 | daniel-s | http://i.imgur.com/gUv9o.jpg |
| 04:42.59 | *** join/#debian sencha (~sencha@184-218-174-112.pools.spcsdns.net) |
| 04:43.15 | napping | I just tried, then apt-file update downloaded an index again but I still see no results. Also, adding -V prints the version (2.4.0) and a 2002 copyright line, but adds no other information |
| 04:43.17 | daniel-s | .gifs look similar to that |
| 04:43.31 | daniel-s | and they're also static, they're not animated, even though they're supposed to be |
| 04:43.34 | somiaj | napping: have you tried apt-file search /usr/bin/bash |
| 04:43.59 | *** join/#debian fisted (~fisted@unaffiliated/fisted) |
| 04:44.05 | *** join/#debian neerolyte (~lyte@unaffiliated/neerolyte) |
| 04:44.54 | somiaj | daniel-s: try to --reinstall the gif libary, apt-get --reinstall install libgif4 |
| 04:45.45 | somiaj | daniel-s: dpkg -l | grep gif to see if you have any other gif libaries. If you don't have to download the new deb, you may want to remove the old deb from /var/cache/apt/archives. [wondering if you have a croupt libary] |
| 04:46.24 | napping | somiaj: No results - I don't have /usr/bin/bash, I have /bin/bash - no results for that either. |
| 04:46.33 | *** join/#debian CannedCorn (~CannedCor@cpe-66-65-102-78.nyc.res.rr.com) |
| 04:46.59 | somiaj | napping: what version of debian? |
| 04:47.45 | napping | stable, cat /etc/debian_version says 6.0.3 |
| 04:48.22 | daniel-s | somiaj: libgif4 is the only gif library I have installed |
| 04:50.01 | *** join/#debian holycow (~holycow@host-64-151-208-2.bchsia.in2net.net) |
| 04:50.05 | somiaj | napping: are you running any of these as root or a user? |
| 04:50.08 | *** join/#debian eSa| (~esa@host153-234-dynamic.248-95-r.retail.telecomitalia.it) |
| 04:50.16 | park_supervisor | What happened to the bitchx package for Debian? As in, why can't I "apt-get install bitchx"? |
| 04:50.29 | napping | ah - I shouldn't have been doing sudo apt-get update. (just noticed that in strace apt_file) |
| 04:50.42 | napping | Thanks, it seems to work now |
| 04:51.04 | somiaj | park_supervisor: it was removed from debian, I forget why though |
| 04:51.20 | *** join/#debian bastidrazor (~razor@unaffiliated/crazychicken) |
| 04:51.46 | rww | !bitchx |
| 04:51.47 | dpkg | BitchX is an old and unmaintained <IRC> client built on epic and ircII. It was abandoned by its upstream, has known security issues and was removed from Debian post-Etch to resolve bug #451373. Ask me instead about <irssi>, <xchat>, <konversation>, <weechat>. To ignore BitchX quit messages in irssi, ask me about <literal bitchxignore>. |
| 04:52.02 | MaXim_ | !weechat |
| 04:52.03 | dpkg | WeeChat is a light and extensible cross-platform <IRC> client that promises a lot, and has some unique features like console nick list and horizontally split windows. http://weechat.org/files/doc/weechat_faq.en.html http://weechat.org/ #weechat on irc.freenode.net. |
| 04:52.09 | rww | or irssi, but yes :) |
| 04:52.20 | park_supervisor | rww: Oh, okay. Irssi seems pretty legit so far, so I'm not sad. |
| 04:52.30 | park_supervisor | somiaj: Thanks. |
| 04:52.36 | sencha | it's not PC :P |
| 04:52.54 | *** part/#debian SashaNeko (~SashaNeko@68-190-132-96.dhcp.eucl.wi.charter.com) |
| 04:53.19 | *** join/#debian Milos (~Milos@pdpc/supporter/student/milos) |
| 04:54.49 | *** join/#debian Jayro (~jarred@142.68.36.184) |
| 04:54.51 | *** part/#debian holycow (~holycow@host-64-151-208-2.bchsia.in2net.net) |
| 04:56.43 | *** join/#debian sameerthahir (~smartbhai@111.92.78.46) |
| 04:56.45 | *** join/#debian lyte (~lyte@unaffiliated/neerolyte) |
| 04:57.06 | *** part/#debian xuser (~xuser@unaffiliated/xuser) |
| 04:58.05 | *** join/#debian aidalgol (~user@114-134-8-121.rurallink.co.nz) |
| 04:59.15 | *** part/#debian icedtea (~paul@76.226.21.84) |
| 05:01.31 | sencha | does squeeze support ext4? |
| 05:01.40 | rww | sencha: yes |
| 05:01.55 | sencha | okay, good, thanks |
| 05:02.31 | rww | (though Debian defaults to ext3 during installation, fyi) |
| 05:02.37 | rww | s/Debian/squeeze/ |
| 05:02.49 | *** join/#debian arvind_khadri (~arvind@unaffiliated/arvind-khadri/x-2237230) |
| 05:03.22 | ectospasm | rww: does it? I don't remember having to pick ext4... (/me looks) |
| 05:03.32 | rww | !ext4 |
| 05:03.33 | dpkg | ext4 (fourth extended filesystem) supports volumes up to one exabyte (1024 petabytes) and extents, available since Linux 2.6.28. Ask me about <ext3->ext4> and <ext4->ext3>. ext4 is not supported by GRUB Legacy (Debian bug #511121) and not the default filesystem in Squeeze (Debian bug #603084). http://wiki.debian.org/Ext4 http://ext4.wiki.kernel.org/ #ext4 and #linuxfs on irc.oftc.net. |
| 05:03.48 | rww | also, my / is ext3, so yes :) |
| 05:04.02 | ectospasm | rww: my / is ext4, and I know I didn't change it |
| 05:04.19 | rww | ectospasm: apparently you have a bad memory, then :) |
| 05:04.30 | ectospasm | could be, I fill it with more useful things |
| 05:04.51 | *** part/#debian napping (~brandon@c-98-228-139-19.hsd1.il.comcast.net) |
| 05:05.55 | *** join/#debian liable (~liable@1.152.219.36) |
| 05:05.55 | *** join/#debian liable (~liable@unaffiliated/liable) |
| 05:08.16 | *** join/#debian hartzie (~hartzie@77-22-118-184-dynip.superkabel.de) |
| 05:09.02 | *** join/#debian DimmuR (~DimmuR@unaffiliated/dimmur) |
| 05:12.04 | sencha | squeeze defaulted to ext3 for me |
| 05:12.12 | sencha | on the text install, at least |
| 05:12.39 | aypea[2] | you have it as na option |
| 05:12.54 | somiaj | if you use expert mode, I belive it lets you choose |
| 05:13.06 | aypea[2] | even in normal mode it lets you choose |
| 05:13.50 | somiaj | aypea[2]: even if you just opt for it to automically partition and install...I think you have to at least choose to do manual choices |
| 05:15.14 | aypea[2] | well yes. it's supported but not the default. just because it's not the default does not mean it's not supported. |
| 05:16.17 | *** join/#debian pappe (~pappe@109.230.236.93) |
| 05:16.31 | *** join/#debian MorrisC (~morrisc@60.248.16.65) |
| 05:18.25 | *** join/#debian ShapeShifter499 (~ShapeShif@c-98-244-33-205.hsd1.ca.comcast.net) |
| 05:19.43 | *** join/#debian gaurang (~gaurang@182.68.187.172) |
| 05:19.52 | *** join/#debian madsci44 (~Tom@toronto44-3429232067.sdsl.bell.ca) |
| 05:19.58 | *** join/#debian lollo64it (~lorenzo@93-58-3-33.ip156.fastwebnet.it) |
| 05:21.02 | *** join/#debian froggyman (~seth@50.105.149.180) |
| 05:21.03 | *** join/#debian froggyman (~seth@unaffiliated/froggyman) |
| 05:25.20 | *** join/#debian adam8157 (~adam@125.33.183.100) |
| 05:25.28 | *** join/#debian adam8157 (~adam@unaffiliated/adam8157) |
| 05:25.34 | *** join/#debian philipballew (~philipbal@ubuntu/member/philipballew) |
| 05:25.48 | *** join/#debian stefuNz (~stefuNz@port-92-204-116-228.dynamic.qsc.de) |
| 05:26.42 | *** join/#debian rrrreimer (~rrrreimer@krsn-5d800911.pool.mediaWays.net) |
| 05:30.16 | *** join/#debian dajhorn (~dajhorn@99-74-253-20.lightspeed.rcsntx.sbcglobal.net) |
| 05:30.58 | *** join/#debian Ratty (~Ratty@96.27.155.255) |
| 05:31.24 | *** join/#debian urlin2u (~urlin2u@unaffiliated/urlin2u) |
| 05:34.12 | *** join/#debian Okazaki-san (~Ota-kun@adsl-76-200-149-227.dsl.pltn13.sbcglobal.net) |
| 05:35.07 | *** join/#debian nielsle_ (~nielsle@3239059-cl69.boa.fiberby.dk) |
| 05:36.31 | *** join/#debian waka__ (~wakariera@unaffiliated/waka) |
| 05:38.05 | *** join/#debian EmleyMoor (phil@topdeck.tinsleyviaduct.com) |
| 05:39.54 | *** join/#debian jair (~jair@173-15-38-126-Illinois.hfc.comcastbusiness.net) |
| 05:41.53 | *** join/#debian MrCoffee (~glen@unaffiliated/ridout) |
| 05:42.26 | *** join/#debian negge (~sam@cs109108025024.pp.htv.fi) |
| 05:44.00 | *** mode/#debian [+l 1081] by debhelper |
| 05:45.12 | *** join/#debian DimmuR (~DimmuR@unaffiliated/dimmur) |
| 05:46.16 | *** join/#debian aminpy (~aminpy@31.47.40.12) |
| 05:49.12 | jokar | hello all |
| 05:49.14 | jokar | all: |
| 05:49.15 | jokar | http://paste.ubuntu.com/716641/ |
| 05:49.18 | jokar | please see it |
| 05:50.13 | somiaj | jokar: #ubuntu |
| 05:50.42 | jokar | soorry |
| 05:50.55 | jokar | they don't know |
| 05:51.08 | *** join/#debian avernos (~avernos@222.128.136.181) |
| 05:51.45 | somiaj | well this is support for debian. |
| 05:52.00 | sencha | jokar, so you finally got it to boot? |
| 05:52.20 | sencha | jokar, what was wrong? |
| 05:52.20 | *** join/#debian rrrreimer (~rrrreimer@krsn-5d800911.pool.mediaWays.net) |
| 05:52.28 | *** join/#debian hele (~hele@cs109108031214.pp.htv.fi) |
| 05:52.41 | *** join/#debian ajaykools (~ajay@117.192.217.234) |
| 05:52.43 | jokar | sencha: it is not booted |
| 05:52.51 | jokar | sencha: i install it but not booted |
| 05:53.00 | sencha | jokar, I mean the cd, I thought you were having issues yesterday getting the cd to boot |
| 05:53.21 | jokar | sencha: yes |
| 05:53.27 | *** join/#debian dutchfish (~wil@unaffiliated/dutchfish) |
| 05:53.29 | sencha | one step closer then :) |
| 05:53.34 | jokar | sencha: i booted with cd and install ubuntu |
| 05:53.48 | jokar | sencha: but after install it is not booted |
| 05:53.58 | *** join/#debian waka__ (~wakariera@unaffiliated/waka) |
| 05:55.28 | jokar | sencha: you can see my partition at http://paste.ubuntu.com/716641/ |
| 05:55.37 | *** join/#debian xi4oyin (~xi4oyin@59.56.205.246) |
| 05:56.20 | sencha | jokar, what happens when you boot? any error messages? |
| 05:56.56 | boudiccas | jokar; we dont support ubuntu, please ask in #ubuntu. exactly as you were told yesterday |
| 05:57.07 | jokar | sencha: when i power on,show me a blue screen and "?" |
| 05:57.31 | boudiccas | !ubuntu |
| 05:58.56 | *** join/#debian sencha_ (~sencha@184-218-174-112.pools.spcsdns.net) |
| 05:59.08 | dpkg | Ubuntu is based on Debian, but it is not Debian. Only Debian is supported on #debian. Use #ubuntu (irc.freenode.net) instead. Even if the channel happens to be less helpful, support for distributions other than Debian is offtopic on #debian. See also <based on debian>. |
| 06:00.58 | *** join/#debian omid8bimo (~omid8bimo@unaffiliated/omid8bimo) |
| 06:01.12 | *** join/#debian daya (~daya@unaffiliated/daya) |
| 06:01.25 | *** join/#debian philipballew (~philipbal@ubuntu/member/philipballew) |
| 06:02.38 | *** join/#debian edog (~edog@office.wargaming.net) |
| 06:03.03 | sencha | I have a wireless network with WPA, which the installer doesn't support |
| 06:03.24 | sencha | if I choose to not configure the network during install, will I have to set anything special up after installation ? like mirrors.list or? |
| 06:03.58 | *** join/#debian aktest (~nodebot@ip68-106-248-207.ph.ph.cox.net) |
| 06:06.03 | sencha | or sources.list or whatever the file is |
| 06:07.56 | *** join/#debian LegolasV (~whoeiii35@kde/developer/sverberkt) |
| 06:08.12 | abaddon | !based on debian |
| 06:08.12 | dpkg | Your distribution may be based on and have software in common with Debian, but it is not Debian. We don't know what changes were made by your distribution. #debian only supports Debian; please respect our choice to volunteer here to help Debian users. Support other distributions is off-topic on #debian, even if your own distro's channel is clueless or non-existent. |
| 06:08.45 | *** join/#debian aktest (~nodebot@ip68-106-248-207.ph.ph.cox.net) |
| 06:08.56 | sencha | abaddon, is that for me? |
| 06:09.07 | abaddon | no, just curious |
| 06:09.16 | sencha | ah, okay :) |
| 06:09.35 | *** join/#debian omeddragon (~ome@pool-71-163-38-16.washdc.fios.verizon.net) |
| 06:10.32 | *** join/#debian propman (~propman@S01060017318c9a2b.du.shawcable.net) |
| 06:10.33 | *** join/#debian yk (~yk@unaffiliated/yk) |
| 06:10.41 | abaddon | sencha i always use the bare minimum for wifi networks, that is wpasupplicant and wireless-tools, dpkg -L them to see the readme's .. if you learn them, they're all you need |
| 06:11.06 | *** join/#debian zeroedout (~quassel@S0106000e0c3c6fb3.vc.shawcable.net) |
| 06:13.05 | *** join/#debian aktest (~nodebot@ip68-106-248-207.ph.ph.cox.net) |
| 06:13.56 | sencha | abaddon, do wpa_supplicant and wireless-tools come on CD1? |
| 06:14.28 | *** join/#debian bony (~user@swecha/bony) |
| 06:14.33 | abaddon | try apt-get'ing them, if not just add the relevant debian repo to your /etc/apt/sources.list |
| 06:15.14 | *** join/#debian Kaede (~Kaede@unaffiliated/kaede) |
| 06:15.17 | *** join/#debian zuse_ (~zuse@HSI-KBW-095-208-069-069.hsi5.kabel-badenwuerttemberg.de) |
| 06:15.31 | *** join/#debian sameerthahir (~smartbhai@111.92.78.46) |
| 06:15.45 | *** join/#debian brammat0r (~brammator@balance.altair-tv.ru) |
| 06:15.56 | sencha | abaddon, okay thanks |
| 06:17.44 | *** join/#debian asiekierka (~asiekierk@178235033012.elblag.vectranet.pl) |
| 06:18.55 | *** join/#debian fisted (~fisted@unaffiliated/fisted) |
| 06:20.48 | *** join/#debian skrewler (~skrewler@70-36-139-123.dsl.dynamic.sonic.net) |
| 06:21.23 | *** join/#debian neron (~Neron@109-184-139-19.dynamic.mts-nn.ru) |
| 06:22.00 | *** join/#debian Eryn_1983_FL (~Eryn_1983@184.91.132.0) |
| 06:22.31 | *** join/#debian Gottaname (~Gottaname@bb121-6-147-6.singnet.com.sg) |
| 06:23.20 | *** join/#debian mavhc (~mavhc@cpc3-basf10-2-0-cust617.12-3.cable.virginmedia.com) |
| 06:23.36 | *** join/#debian mavhc (~mavhc@cpc3-basf10-2-0-cust617.12-3.cable.virginmedia.com) |
| 06:24.18 | *** join/#debian Mr_Queue (~Mr_Queue@173.214.171.243) |
| 06:24.20 | *** join/#debian vinian (~vinian@219.142.192.149) |
| 06:25.12 | *** join/#debian Mr_Queue (~Mr_Queue@173.214.171.243) |
| 06:25.38 | *** join/#debian skrewler (~skrewler@70-36-139-123.dsl.dynamic.sonic.net) |
| 06:25.55 | *** join/#debian Mr_Queue (~Mr_Queue@173.214.171.243) |
| 06:29.15 | *** join/#debian popkill (~popkill@unaffiliated/popkill) |
| 06:32.28 | *** join/#debian aktest (~nodebot@ip68-106-248-207.ph.ph.cox.net) |
| 06:32.48 | *** join/#debian compy386 (~sh333ts@rrcs-70-61-235-81.central.biz.rr.com) |
| 06:33.04 | *** join/#debian Kaede_ (~Kaede@unaffiliated/kaede) |
| 06:33.30 | *** part/#debian Talon_ (~Talon_@50.51.3.102) |
| 06:35.48 | *** join/#debian tekzilla (~jon@hmbg-5f77c0a6.pool.mediaWays.net) |
| 06:37.40 | *** join/#debian desti (~desti@dslb-092-072-217-233.pools.arcor-ip.net) |
| 06:42.40 | *** join/#debian jokar1 (~jokar@91.98.183.139) |
| 06:46.37 | *** join/#debian shadowm_laptop (ignacio@wesnoth/developer/shadowmaster) |
| 06:47.31 | *** join/#debian eSa| (~esa@host35-232-dynamic.17-79-r.retail.telecomitalia.it) |
| 06:50.23 | *** join/#debian delimax (~max@h189.124.232.68.dynamic.ip.windstream.net) |
| 06:52.00 | *** join/#debian urlin2u (~urlin2u@unaffiliated/urlin2u) |
| 06:52.11 | *** join/#debian TheDreamer (~Youri@2001:0:5ef5:79fd:1461:f856:ac5e:f7d7) |
| 06:54.16 | *** join/#debian pbase (~pbase@unaffiliated/pbase) |
| 06:55.13 | *** mode/#debian [+o Hydroxide] by ChanServ |
| 06:55.25 | *** mode/#debian [-b *!*@gateway/web/freenode/*] by Hydroxide |
| 06:55.31 | *** mode/#debian [-o Hydroxide] by Hydroxide |
| 06:56.29 | *** join/#debian pdtpatrick___ (~pdtpatric@ip72-211-209-214.oc.oc.cox.net) |
| 06:57.13 | *** part/#debian madsci44 (~Tom@toronto44-3429232067.sdsl.bell.ca) |
| 06:57.58 | *** join/#debian stoffepojken (~stoffe@h-120-45.a254.priv.bahnhof.se) |
| 06:59.44 | *** join/#debian CpuID (~nathan@gentoo/contributor/cpuid) |
| 07:00.38 | *** join/#debian Benkinooby (~Benkinoob@unaffiliated/benkinooby) |
| 07:01.02 | pbase | is there an update to the log viewer? I can't see any logs in the viewer by deafult |
| 07:08.09 | *** join/#debian bocaneri (~sauvin@about/linux/staff/sauvin) |
| 07:08.26 | *** part/#debian pbase (~pbase@unaffiliated/pbase) |
| 07:08.41 | *** join/#debian huglester (~quassel@78.157.71.116) |
| 07:08.55 | *** join/#debian B08 (~quassel@70-100-131-37.dsl1-field.roch.ny.frontiernet.net) |
| 07:10.25 | *** join/#debian bobweaver (~quassel@unaffiliated/bobweaver) |
| 07:12.32 | *** join/#debian Mkaysi|ZNC (~Mkaysi@TouchLay/Member/Mkaysi) |
| 07:12.49 | *** join/#debian mark76 (~mark76@cpc10-nfds14-2-0-cust293.8-2.cable.virginmedia.com) |
| 07:15.27 | *** join/#debian hele (~hele@cs109108031214.pp.htv.fi) |
| 07:16.59 | *** join/#debian densone (~densone@c-76-118-232-193.hsd1.ma.comcast.net) |
| 07:17.13 | *** join/#debian acathur (~acathur@31.56.90.16) |
| 07:17.13 | *** join/#debian acathur (~acathur@unaffiliated/acathur) |
| 07:18.04 | *** join/#debian josh99 (~oren@cpe-76-172-9-207.socal.res.rr.com) |
| 07:18.55 | *** join/#debian Benkinooby (~Benkinoob@unaffiliated/benkinooby) |
| 07:19.14 | *** join/#debian EvilDaniel0108 (~Daniel010@2001:4ba0:cafe:4d8::1) |
| 07:20.40 | *** join/#debian MUILTFN (~MLINTH@adsl-98-80-222-227.mcn.bellsouth.net) |
| 07:21.48 | *** join/#debian cahoot (~radix@pdpc/supporter/active/cahoot) |
| 07:22.00 | *** join/#debian StefandeVries (~stefan@unaffiliated/stefandevries) |
