| 00:02.56 | *** part/#debian ozette (~ozette@unaffiliated/ozette) |
| 00:05.32 | *** join/#debian |oop (~pool@c-68-81-109-22.hsd1.pa.comcast.net) |
| 00:09.10 | *** join/#debian bollullera1 (~anuxi@89.7.24.109) |
| 00:09.16 | *** part/#debian bollullera1 (~anuxi@89.7.24.109) |
| 00:09.35 | *** join/#debian bollullera1 (~anuxi@89.7.24.109) |
| 00:09.49 | *** join/#debian vxtr9 (~maxiu@c-50-139-56-146.hsd1.or.comcast.net) |
| 00:10.22 | *** join/#debian kaen (~master@unaffiliated/hail) |
| 00:14.42 | *** join/#debian chatsiri_ (~chatsiri_@171.6.174.58) |
| 00:16.13 | *** join/#debian bit0 (~josea@61.Red-80-24-119.staticIP.rima-tde.net) |
| 00:16.46 | hashmaster1 | Any other suggestions for |
| 00:17.13 | mrdeb | for what |
| 00:17.41 | *** join/#debian mesoderm (~annie@2601:8:9f00:796:80a3:c7b0:35d6:ad44) |
| 00:17.42 | hashmaster1 | No internet, |
| 00:17.57 | hashmaster1 | Sorry got cut off |
| 00:17.57 | mrdeb | did u set it up for hdcp |
| 00:18.05 | mrdeb | or network manager |
| 00:18.45 | *** join/#debian ThatCantBe (~irc@dsl.dyn-206.53.180.79.tbinet.bm) |
| 00:18.48 | hashmaster1 | It was a fresh install from the non free firmware usb, im connected to my wifi but no actual internet |
| 00:19.28 | *** join/#debian m4ggus (marcus@unaffiliated/m4ggus) |
| 00:19.30 | mrdeb | idk what that means |
| 00:19.48 | mrdeb | if u use 7.1 iso, u can configure dhcp or network-manager-gnome |
| 00:19.54 | mrdeb | or there is other way |
| 00:20.03 | *** join/#debian crus (~crusader@crus0r.soho.on.net) |
| 00:20.27 | *** join/#debian Guest64201 (~Canaima@unaffiliated/mellamo-ismael) |
| 00:21.30 | hashmaster1 | Well I installed from a usb, dvds didnt burn right, set up went good, connected through lan line for install, did the wireless setup im connected to the wifi nwtwork but cant access the internet |
| 00:22.38 | *** join/#debian ese (~ese@unaffiliated/ese) |
| 00:23.17 | *** join/#debian sysrqalt1 (~brock@2601:7:1c40:103:5054:ff:fec0:b173) |
| 00:24.10 | mrdeb | do u have network manager installed |
| 00:24.21 | mrdeb | or read wiki on setting up wifi |
| 00:25.21 | *** part/#debian Guest64201 (~Canaima@unaffiliated/mellamo-ismael) |
| 00:25.50 | *** join/#debian Ricardo__ (~rick@unaffiliated/ricardo--/x-7903455) |
| 00:27.44 | hashmaster1 | Mrdeb: Ive been going through the wikis, but not a highly advanced linux user, theres no "network manager" under applications just a network connection and network tools |
| 00:27.48 | *** part/#debian hiyo (~puppy@unaffiliated/hiyo) |
| 00:28.03 | *** join/#debian sysrqalt (~brock@2601:7:1c40:103:5054:ff:fec0:b173) |
| 00:28.04 | *** join/#debian patterson (~patterson@c-67-188-24-218.hsd1.ca.comcast.net) |
| 00:28.06 | abrotman | hashmaster1: on gnome3? |
| 00:28.37 | mrdeb | hashmaster, can u get connected at all |
| 00:29.22 | hashmaster1 | Shit did I do gnome |
| 00:29.49 | hashmaster1 | Yeah I have connection to my router, cant do anything else after that |
| 00:32.42 | *** join/#debian john_rambo (~tux@unaffiliated/john-rambo/x-5460353) |
| 00:34.01 | john_rambo | When I start Icedove I am getting this >>>>> http://paste.debian.net/36691/ |
| 00:34.17 | *** join/#debian b2_ (~b2@62.73.116.195) |
| 00:34.36 | abrotman | john_rambo: did you install it form another repo ? |
| 00:34.49 | john_rambo | abrotman, No |
| 00:35.16 | abrotman | john_rambo: wheezy? |
| 00:35.27 | *** join/#debian merjord (~merjord@94.242.205.235) |
| 00:35.36 | john_rambo | abrotman, squeeze |
| 00:35.50 | abrotman | john_rambo: and this just started? |
| 00:37.15 | john_rambo | abrotman, I finished installing the distro an hour back. Now I am installing the softwares one by one. SO far all have installed and starter successfully leaving Icedove |
| 00:37.31 | *** join/#debian sysrqalt (~brock@2601:7:1c40:103:5054:ff:fec0:b173) |
| 00:38.37 | abrotman | john_rambo: you just installed squeeze? why not wheezy? |
| 00:38.38 | mrdeb | john_rambo: i am enjoying your movies, thank u |
| 00:38.47 | abrotman | dpkg: tell mrdeb about u |
| 00:39.41 | john_rambo | abrotman, coz I want stability |
| 00:40.05 | mrdeb | deb 7 is stable |
| 00:40.10 | john_rambo | mrdeb, keep watching |
| 00:40.15 | mrdeb | waht |
| 00:40.21 | abrotman | john_rambo: wheezy is stable, squeeze is old stable |
| 00:40.27 | mrdeb | watching what |
| 00:40.44 | john_rambo | mrdeb, The Rambo series |
| 00:40.52 | abrotman | please let it end ... |
| 00:40.59 | mrdeb | oh yes |
| 00:41.06 | *** join/#debian DonRichie (~DonRichie@dslb-084-059-164-194.pools.arcor-ip.net) |
| 00:41.32 | *** join/#debian bollullera (~anuxi@89.7.24.109) |
| 00:42.06 | karlpinc | john_rambo: In fact, squeeze will go out of security support one of these days pretty soon. You only get 6 months after release of the next stable of oldstable security support. |
| 00:43.06 | john_rambo | karlpinc, Do you know the exact date of expiry ? |
| 00:43.20 | *** join/#debian disarone (~disa@xdsl-81-173-248-187.netcologne.de) |
| 00:43.46 | mrdeb | feb 2014 |
| 00:44.07 | mrdeb | but you can just wait for debian 8 |
| 00:44.17 | mrdeb | as long as you update iceweasel |
| 00:44.29 | john_rambo | mrdeb, I will do that then |
| 00:44.57 | abrotman | i wouldn't do that |
| 00:45.00 | magnulu | I am so afraid of updating my nas from squeeze to wheezy... terrified.. |
| 00:45.03 | *** join/#debian cmoy (~lollies@58-6-201-185.dyn.iinet.net.au) |
| 00:45.08 | abrotman | john_rambo: why not use wheezy? |
| 00:45.14 | mrdeb | up to you |
| 00:45.29 | mrdeb | i mean i have installed deb6/7 back and forth about 30 times over past year to test |
| 00:45.35 | mrdeb | compare speed etc |
| 00:45.51 | mrdeb | 7 is good if you dont use gnome 3 |
| 00:46.04 | abrotman | it has nothing to do with gnome |
| 00:46.10 | abrotman | mrdeb: please stop making stuff up |
| 00:46.27 | mrdeb | opinion |
| 00:46.36 | john_rambo | abrotman, I just fished downloading and installing sqeeze ......let me use it for a while ... I will move one |
| 00:46.59 | abrotman | mrdeb: 7 is good, if you don't like gnome3, use another window manager. Stop making shit up |
| 00:47.16 | mrdeb | that is what i said |
| 00:47.22 | abrotman | no, you didn't |
| 00:47.24 | mrdeb | i use openbox with 7, bec i would not use gnome with 7 |
| 00:48.50 | reavengrey | What is going on |
| 00:48.56 | reavengrey | I am reading stupidity |
| 00:48.59 | reavengrey | whyyyy |
| 00:49.12 | abrotman | you sure are |
| 00:49.53 | mrdeb | how are you tonight |
| 00:50.59 | *** join/#debian Bry8Star_ (~Bry8Star@gateway/tor-sasl/bry8star) |
| 00:51.23 | *** join/#debian red_dragon (~a@c83-248-227-30.bredband.comhem.se) |
| 00:51.52 | *** join/#debian unixninja92 (~unixninja@c-46-162-92-126.cust.bredband2.com) |
| 00:52.33 | *** join/#debian przemoc (~przemoc@unaffiliated/przemoc) |
| 00:53.23 | red_dragon | hey! from my server I am able to ping ftp.debian.org, but I can't wget the homepage or update from it. If I go to that server from this computer the site works fine. |
| 00:53.36 | red_dragon | how can I identify the problem? |
| 00:55.06 | *** join/#debian githogori (~githogori@c-50-156-57-127.hsd1.ca.comcast.net) |
| 00:55.14 | *** join/#debian sailerboy (~sailerboy@sailerboy.net) |
| 00:55.41 | *** join/#debian Atlas (atlas@unaffiliated/atlas-) |
| 00:55.55 | *** part/#debian mavzuna (~mavzuna@unaffiliated/mavzuna) |
| 00:57.58 | *** join/#debian frustrum (~frustrum@ip68-4-122-232.oc.oc.cox.net) |
| 00:58.08 | *** join/#debian id10t (~sj@h141.80.91.75.dynamic.ip.windstream.net) |
| 00:58.10 | *** join/#debian xcynthi (~xcynthx@unaffiliated/xcynthi) |
| 00:58.17 | id10t | 'lo all... |
| 00:58.21 | *** join/#debian sysrqalt (~brock@2601:7:1c40:103:5054:ff:fec0:b173) |
| 00:58.32 | *** join/#debian shingouz (~doowop@85-76-140-104-nat.elisa-mobile.fi) |
| 00:59.00 | *** join/#debian timahvo1 (~rogue@197.237.174.93) |
| 00:59.43 | id10t | i'm tryin to get something working that was abandoned early 2012 and based on Sid ... i know dist-upgrading will break what I have (and badly). would wheezy be close to what was in sid 18 months ago? |
| 00:59.46 | *** join/#debian schlarpc (~schlarpc@cpe-098-026-019-153.nc.res.rr.com) |
| 01:02.09 | *** part/#debian TheUser (~B@14.150.126.23) |
| 01:02.11 | *** join/#debian mumpitze1 (~mumpitzel@p5DD06A3C.dip0.t-ipconnect.de) |
| 01:02.52 | *** join/#debian koroshiya (~koroshiya@94.102.51.133) |
| 01:03.44 | *** join/#debian seb___ (~seb___@132.212.143.194) |
| 01:09.07 | *** join/#debian jasonwert (~w3rt@96-42-150-164.dhcp.trcy.mi.charter.com) |
| 01:09.27 | *** join/#debian chaiz (~chaiz@ppp-124-121-55-184.revip2.asianet.co.th) |
| 01:10.01 | *** mode/#debian [+l 1353] by debhelper |
| 01:11.24 | abrotman | id10t: we really vcan't answer that |
| 01:11.40 | abrotman | red_dragon: you sohuldn't use ftp.debian.org nayway |
| 01:11.42 | abrotman | anyway |
| 01:12.18 | id10t | abrotman: thanks. i'll dd an image backup and try |
| 01:12.48 | red_dragon | abrotman: I just use the defaults, I tried to change to ftp.se.debian.org (it was some netherlands place), but that did not work either |
| 01:13.37 | id10t | red_dragon: what are you trying to find? i can /msg you a mirror I run for myself and my students |
| 01:14.28 | red_dragon | I just want the normal debian packages, but I don't get a response from any one from that server |
| 01:14.35 | red_dragon | ping works, but not any http requests |
| 01:14.53 | red_dragon | and on my windows computer to check if the servers are down, they work fine |
| 01:15.00 | id10t | proxy or anything like that in your way? |
| 01:15.02 | red_dragon | a wget to google also works |
| 01:15.16 | id10t | mind if i /msg you? |
| 01:15.26 | red_dragon | please do :) |
| 01:16.11 | abrotman | red_dragon: .se implies sweden ? |
| 01:16.19 | abrotman | red_dragon: pastebin your sources.list |
| 01:16.32 | abrotman | red_dragon: id10t please keep ti in the channel |
| 01:17.26 | id10t | abrotman: i run this mirror for my students and myself to use at work... i can't have it become super public due to bandwidth restrictions |
| 01:18.06 | abrotman | id10t: so he should be using public mirrors, not a private one |
| 01:18.42 | id10t | abrotman: unless there is some issue with the mirror(s) he is trying to use |
| 01:18.48 | *** join/#debian jrgill (~jrgill@unaffiliated/jrgill) |
| 01:18.51 | abrotman | id10t: all of them? |
| 01:18.55 | id10t | abrotman: which of course there shouldn't be... but.... |
| 01:19.02 | abrotman | id10t: thus, keep it in the channel |
| 01:19.52 | id10t | red_dragon: did my mirror work for ya? |
| 01:20.17 | red_dragon | it worked fine, but I still don't understand why the 2 mirrors I tried at first did not work |
| 01:20.35 | abrotman | red_dragon: pastebin your sources.list |
| 01:21.12 | red_dragon | my original sources.list was just the default ftp.debian.org and security.debian.org |
| 01:21.25 | mrdeb | how come debian install does not come with sources populated |
| 01:21.30 | abrotman | it does |
| 01:21.35 | abrotman | red_dragon: do not use ftp.debian.org |
| 01:21.46 | red_dragon | you told me that already |
| 01:21.53 | abrotman | dpkg: tell red_dragon about wheezy sources.list |
| 01:21.54 | red_dragon | I also tried ftp.se.debian.org |
| 01:22.02 | *** join/#debian reavengrey (~reavengre@unaffiliated/reavengrey) |
| 01:23.30 | red_dragon | http.debian.org also does not work |
| 01:23.55 | red_dragon | oh, that said .net |
| 01:24.10 | *** join/#debian basic6_ (~basic6@p549A0E69.dip0.t-ipconnect.de) |
| 01:25.56 | red_dragon | http.debian.net does not work, ftp.ds.karen.hj.se/debian does not work. aw well. |
| 01:26.06 | red_dragon | id10t's server worked fine |
| 01:26.06 | *** join/#debian peter (~peter@p548211D1.dip0.t-ipconnect.de) |
| 01:26.10 | abrotman | what part does not work ? |
| 01:26.20 | abrotman | they don't work when you 'aptitude update' ? |
| 01:26.22 | *** join/#debian joako (~joako@opensuse/member/joak0) |
| 01:26.24 | red_dragon | yup |
| 01:26.45 | abrotman | red_dragon: please pastebin that error |
| 01:27.17 | red_dragon | just waiting for headers |
| 01:27.23 | red_dragon | and then nothing for ages |
| 01:28.10 | *** join/#debian reavengrey (~reavengre@unaffiliated/reavengrey) |
| 01:28.53 | abrotman | red_dragon: so you have a proxy or firewall controlling access? |
| 01:33.09 | abrotman | okay then |
| 01:33.30 | red_dragon | I am not 100% sure on how to check if I have a proxy |
| 01:33.33 | *** join/#debian Se-bash (~seba@unaffiliated/se-bash) |
| 01:33.42 | red_dragon | my ifconfig looks fine |
| 01:34.01 | abrotman | won't show there |
| 01:34.35 | red_dragon | and iptables is clean. |
| 01:36.29 | *** join/#debian virusuy (~virusuy@unaffiliated/virusuy) |
| 01:36.34 | red_dragon | a wget of whatismyip.com gives a timeout |
| 01:36.42 | red_dragon | sigh, what is going on |
| 01:37.40 | abrotman | but your browser works ? |
| 01:37.51 | red_dragon | browser is on windows computer |
| 01:37.55 | *** join/#debian chrisss404 (~chrisss40@85-127-161-80.dynamic.xdsl-line.inode.at) |
| 01:37.57 | red_dragon | only wget on server |
| 01:38.03 | abrotman | you also have w3m |
| 01:38.31 | red_dragon | not installed, and apt-get will not behave |
| 01:38.37 | *** join/#debian f10 (~f10@188-192-183-84-dynip.superkabel.de) |
| 01:38.41 | abrotman | it should be installed |
| 01:38.42 | id10t | abrotman: don't forget he could get to my server fine (on a .edu address in Florida) |
| 01:39.05 | red_dragon | wget on reddit...failed |
| 01:39.39 | abrotman | id10t: and what? |
| 01:40.01 | *** mode/#debian [+l 1346] by debhelper |
| 01:40.33 | *** join/#debian BenNZ (~Ben__@226.7.252.27.dyn.cust.vf.net.nz) |
| 01:41.21 | id10t | abrotman: well, that means dns works, and any proxy is allowing connections to *.edu (highly unlikely it would allow a host in a subdomain on my little community college domain thru by default? if it is blocking traffic to ftp.us.debian.org or wherever) |
| 01:41.38 | abrotman | id10t: or your host isn't popular enough to be cached, etc ? |
| 01:42.18 | id10t | abrotman: shouldn't a caching proxy go out and get a copy and deliver that if the file/site/wahtever isn't in its cache already? |
| 01:42.29 | abrotman | id10t: okay, then tell him why reddit doesn't work ? |
| 01:42.49 | id10t | ah, no one should go there anyway :) |
| 01:43.01 | abrotman | not helpful |
| 01:43.17 | id10t | red_dragon: lets start over. what is in /etc/resolv.conf for your nameserver entry(ies) |
| 01:43.39 | red_dragon | 8.8.8.8 and 8.8.4.4 |
| 01:43.39 | id10t | and is it the same as on your windows box? |
| 01:43.43 | red_dragon | yes |
| 01:43.55 | id10t | ok... i guess we can assume that google knows how to keep a DNS box up and running :) |
| 01:44.11 | id10t | who is your service provider? can you get to their website? |
| 01:44.27 | red_dragon | http://www.weloveservers.net/ works fine |
| 01:45.13 | abrotman | wonders if beardy is awake .. |
| 01:45.45 | beardy | is |
| 01:46.00 | id10t | when you try reddit, is it failing at dns or at actually getting a page? |
| 01:46.47 | red_dragon | for wikipedia I got 200ok with length 60k text/html and it stops at 0% |
| 01:47.07 | abrotman | does it print the IP ? |
| 01:47.12 | red_dragon | yep |
| 01:47.16 | red_dragon | and it is the right one |
| 01:47.59 | *** join/#debian roboman2444 (~roboman24@unaffiliated/roboman2444) |
| 01:48.53 | id10t | can you get to itsjustcrap.com ? (on my linode machine) |
| 01:49.14 | red_dragon | yep |
| 01:49.56 | id10t | and is your ip currently 109.73.172.223 |
| 01:50.24 | red_dragon | yep |
| 01:50.59 | id10t | hrm... when you run nslookup reddit.com what ips do you get? |
| 01:51.23 | *** join/#debian fedesilva (~fedesilva@r186-52-146-30.dialup.adsl.anteldata.net.uy) |
| 01:51.23 | beardy | red_dragon: Is that the IP-address of the amchine you have problems with? |
| 01:51.30 | red_dragon | yep |
| 01:51.45 | beardy | red_dragon: That's in US, Florida.. why are you not using a US mirror. |
| 01:51.48 | red_dragon | id10t: command not found :) |
| 01:52.06 | red_dragon | I bought one in the UK. |
| 01:52.08 | red_dragon | hmm |
| 01:52.15 | id10t | wait what.... |
| 01:52.26 | id10t | i thought you were testing from your machine in hte UK ? |
| 01:52.42 | red_dragon | ah, sorry, the server is in the UK, I am in sweden |
| 01:53.11 | *** join/#debian lcafiero (d1cb4502@gateway/web/freenode/ip.209.203.69.2) |
| 01:53.29 | id10t | the ip i saw in my logs on itsjustcrap.com is the one i sent |
| 01:53.44 | beardy | red_dragon: Ah.. yes. Machine in the UK, US-owned. |
| 01:53.52 | id10t | is that the machine that can't get to reddit.com ? |
| 01:54.00 | red_dragon | yes |
| 01:54.06 | red_dragon | or many other sites |
| 01:54.18 | red_dragon | or most debian package servers |
| 01:54.51 | *** join/#debian bizarro_1 (~bizarro_1@51.Red-88-19-141.staticIP.rima-tde.net) |
| 01:55.25 | id10t | i hate to say it but you'll need to check with your host provider... i don't think it is on your machine... you are using the same DNS servers I am, your real ip is showing on remote machines (that you can get to) ... i don't think it is anything on your end |
| 01:55.29 | beardy | Did you try using UK mirrors? |
| 01:56.10 | beardy | But yes, it is besides the point a bit. You should check with the VPS/VM or network provider. |
| 01:56.19 | red_dragon | one in netherlands and one in sweden, will check uk one now. |
| 01:56.22 | beardy | Also do a traceroute to something you have trouble with. |
| 01:56.35 | beardy | Make up your mind? |
| 01:56.44 | beardy | Which do you have problems with? |
| 01:57.47 | red_dragon | uk.debian, se.debian and normal debian does not work |
| 01:58.03 | red_dragon | a semi-private one by id10t works |
| 01:59.17 | beardy | I suspect IPv6 records and your box being confused about its v6 capability. |
| 01:59.32 | red_dragon | oooh |
| 01:59.37 | beardy | Or, that there are routing issues from your provider outwards. |
| 01:59.43 | red_dragon | that might explain the randomness |
| 01:59.47 | beardy | Yes. |
| 01:59.51 | red_dragon | that too, but it has been happening for a while |
| 02:00.25 | beardy | !disable ipv6 |
| 02:00.26 | dpkg | From Debian 6.0 "Squeeze" onwards, <IPv6> is built into the Linux kernel (excluding the loongson-2f flavour). To disable IPv6, add the kernel command line option ipv6.disable=1 to your bootloader. |
| 02:00.26 | Dagger2 | I heard v6. *starts reading backlog* |
| 02:00.37 | beardy | Or look at the Debian wiki, it has some other pointers. |
| 02:00.47 | Dagger2 | and no, don't just disable v6 at first wiff of a problem, fix the damn problem :/ |
| 02:01.02 | beardy | You fix it. |
| 02:01.41 | Dagger2 | red_dragon: check the "Resolving" line of wget. does it list v6 addresses first with v4 addresses afterwards? for, say, ftp.debian.org? |
| 02:01.57 | *** join/#debian icedtea (~paul@141.217.220.94) |
| 02:01.59 | abrotman | Dagger2: is that in your highlights? :) |
| 02:02.06 | Dagger2 | yes :) |
| 02:02.24 | red_dragon | Dagger2: it lists it last |
| 02:03.02 | *** join/#debian onitaL (~Lat@pool-173-72-180-239.clppva.fios.verizon.net) |
| 02:03.37 | Dagger2 | red_dragon: then it shouldn't be v6 causing the problem, because it should be trying v4 first |
| 02:04.01 | red_dragon | and just trying to wget from a ipv4 directly also gives problems |
| 02:04.06 | *** join/#debian jiohdi (~jiohdi@pool-173-65-75-42.tampfl.fios.verizon.net) |
| 02:04.12 | onitaL | Hello, I've heard two beepings from my box (twice already) and can't figure out what was it. X is off, so no GUI could have done it. dmesg doesn't show anything unusual, temps are lower than 40C |
| 02:04.26 | *** join/#debian james41382 (~james@c-71-197-239-106.hsd1.wa.comcast.net) |
| 02:04.32 | onitaL | it's a dell, and all the leds lights are ok |
| 02:05.22 | id10t | onitaL: one beep or a series of beeps? |
| 02:05.22 | abrotman | is anything happening on the box? |
| 02:05.27 | *** join/#debian Berry6510 (~Berry@5356AEE3.cm-6-7c.dynamic.ziggo.nl) |
| 02:05.31 | abrotman | like, hitting 'Esc' twice while in vi ? |
| 02:05.33 | onitaL | it was either 2 or 3 |
| 02:05.46 | *** join/#debian dvs (~colin@cwv.teksavvy.com) |
| 02:05.59 | onitaL | I gotta put attention next time how many are |
| 02:06.43 | onitaL | I guess your question is if its the system bell. I believe is the system bell |
| 02:07.27 | james41382 | What's happening? |
| 02:07.35 | icedtea | onitaL: where you in any type of editor at the time? |
| 02:07.39 | onitaL | no |
| 02:08.55 | onitaL | that pc is a supybot/smb/ftp server, so I wasn't even touching it (maybe a pc in the network) |
| 02:14.05 | abrotman | onitaL: does your BIOS record events? |
| 02:14.45 | onitaL | I know it records when the case have been open, so I guess taht's what you're talking about |
| 02:15.01 | *** join/#debian jasonwert (~w3rt@96-42-150-164.dhcp.trcy.mi.charter.com) |
| 02:15.08 | abrotman | ish, yes |
| 02:16.35 | id10t | wow. took over an hour to install build-essential on my little arm5 netbook |
| 02:19.41 | *** join/#debian Vicissitude (~Vicissitu@pdpc/supporter/active/vicissitude) |
| 02:22.49 | *** join/#debian Ephemeris959 (~binny@pool-72-77-96-114.pitbpa.east.verizon.net) |
| 02:23.40 | *** join/#debian ledestin (~ledestin@119.224.34.17) |
| 02:24.46 | *** join/#debian glebihan (~glebihan@unaffiliated/glebihan) |
| 02:26.19 | *** join/#debian binaryhat (~binaryhat@pool-96-224-67-193.nycmny.east.verizon.net) |
| 02:31.30 | *** mode/#debian [+o eir] by ChanServ |
| 02:31.31 | *** mode/#debian [-bo *!*@187.153.35.168 eir] by eir |
| 02:34.11 | *** join/#debian tnguyen (~Thunderbi@c-68-35-49-173.hsd1.nm.comcast.net) |
| 02:35.19 | onitaL | ok, it just did it again. Two beeps |
| 02:35.42 | abrotman | do you think the system will self destruct in 10 seconds? |
| 02:35.54 | abrotman | were you doing anything on the box? |
| 02:36.00 | abrotman | did you check syslog and messages? |
| 02:36.00 | onitaL | I wonder now if it will do it again in 30mins |
| 02:36.06 | somiaj | do you have the pcspkr module loaded, I thought it was black listed by default? |
| 02:36.11 | onitaL | dmesg, yes, where else? |
| 02:36.12 | abrotman | onitaL: is it random, or timed? |
| 02:36.26 | abrotman | somiaj: but i think he wants to find the source of the beeps, not stop them / |
| 02:36.30 | onitaL | abrotman, it seems it's every 30mins, I haven't confirmed taht |
| 02:36.53 | somiaj | abrotman: well if pcspkr isn't loaded could it be some warning from the mobo...just a random thought mostly |
| 02:36.54 | onitaL | pcskr is loaded |
| 02:37.06 | somiaj | wonder if you can watch that device and see what uses it |
| 02:37.25 | *** join/#debian s3phir0th115 (~s3phir0th@pool-71-113-22-17.rcmdva.east.verizon.net) |
| 02:38.45 | *** join/#debian s3phir0th115 (~s3phir0th@pool-71-113-22-17.rcmdva.east.verizon.net) |
| 02:38.55 | onitaL | can a partition (not system partion) trigger beeps if they're full? |
| 02:39.19 | abrotman | not likely |
| 02:39.21 | *** join/#debian PantheraRazorK (~panthera@213.233.103.187) |
| 02:39.52 | onitaL | what /var/log files should I check? |
| 02:40.32 | icedtea | messages |
| 02:40.55 | icedtea | kern.log |
| 02:41.45 | icedtea | syslog |
| 02:44.09 | *** join/#debian hashmaster1 (~androirc@ip68-7-207-87.sd.sd.cox.net) |
| 02:44.14 | *** join/#debian mobileblue (~mobileblu@dslb-094-218-066-149.pools.arcor-ip.net) |
| 02:44.30 | onitaL | messages and kern.log have the last entries an hour ago. syslog looks normal to me. the times doesn't conside with the time the beeps ocurred |
| 02:44.41 | onitaL | 15mins to go to confirm if it is every 30mins |
| 02:46.40 | *** join/#debian MoSh_ (mosh@68.49.255.141) |
| 02:47.48 | *** join/#debian Vicissitude (~Vicissitu@pdpc/supporter/active/vicissitude) |
| 02:54.41 | *** join/#debian Konomi (~Konomi@unaffiliated/konomi) |
| 02:54.51 | *** join/#debian alexandros_c (~alexandro@unaffiliated/alexandros-c/x-1684531) |
| 02:56.02 | *** join/#debian doleyb (~pwickis@pool-173-48-101-14.bstnma.fios.verizon.net) |
| 02:56.18 | *** join/#debian pattonb (~chatzilla@mail.network1.ca) |
| 02:56.24 | *** join/#debian SineTheCreator (~darked@cpe-174-096-023-200.carolina.res.rr.com) |
| 02:56.53 | *** join/#debian reavengrey (~reavengre@unaffiliated/reavengrey) |
| 02:59.05 | *** join/#debian fghd (~fghd@188.186.84.12) |
| 02:59.27 | fghd | hello! |
| 02:59.29 | *** join/#debian safejav (~safejav@190.188.180.54) |
| 02:59.57 | fghd | sorry for my english, but i have a two interesting questions |
| 02:59.58 | *** join/#debian cypherman (~cypherman@r179-31-73-107.dialup.mobile.ancel.net.uy) |
| 03:00.49 | fghd | assume that we have one file. how we can copy file from self to self? |
| 03:01.05 | abrotman | why would you? the result would be the same as the original? |
| 03:01.17 | dvs | touch it1 |
| 03:01.42 | fghd | i use some combinations of pipe, input/output redirection |
| 03:01.46 | *** join/#debian spade (~rheturd@cm-84.209.1.11.getinternet.no) |
| 03:02.33 | fghd | but i failed to achieve results |
| 03:03.35 | *** join/#debian vladuke__ (~vladuke@178.130.42.7) |
| 03:03.40 | onitaL | facepalms |
| 03:03.59 | onitaL | sighs in relief |
| 03:05.30 | abrotman | onitaL: it was the blender? |
| 03:05.42 | onitaL | very close |
| 03:05.56 | onitaL | it was my phone begging for food |
| 03:06.02 | abrotman | heh |
| 03:06.15 | abrotman | so, not the dell at all eh? |
| 03:06.26 | onitaL | no, lol |
| 03:07.01 | onitaL | phone was already at 2%. My old phone would make more noise when the battery was always dead |
| 03:07.07 | red_dragon | fghd: please try to explain more thoroughly what it is you want to do. |
| 03:07.35 | *** join/#debian winsen (~winsen_m@90.84.144.13) |
| 03:07.36 | *** join/#debian winsen (~winsen_m@unaffiliated/winsen) |
| 03:07.36 | onitaL | this is the first time I let the battery go this slow |
| 03:08.13 | *** join/#debian Damter (~damter@ool-43538ac1.dyn.optonline.net) |
| 03:08.44 | *** join/#debian dorito_125 (~dorito_12@108-71-149-228.lightspeed.mmphtn.sbcglobal.net) |
| 03:09.16 | *** join/#debian eax74 (~maxiu@c-50-139-56-146.hsd1.or.comcast.net) |
| 03:09.17 | *** join/#debian HazardX (~HazardX3@pool-96-237-60-237.bstnma.fios.verizon.net) |
| 03:09.25 | fghd | red_dragon: i have one file, i need copy this file to itself uses pipe,tee or input/output redirections |
| 03:09.49 | fghd | sorry for my english |
| 03:10.10 | onitaL | what language do you speak? |
| 03:11.01 | onitaL | and I wonder if what you want is to append >> |
| 03:11.13 | fghd | russian |
| 03:11.44 | LtL | onitaL: friendly hint - it's always wise to prefix a statement or question with a user's nick :) (saves confusion) |
| 03:11.50 | fghd | onitaL: no, i dont want that :) |
| 03:12.00 | Damter | Quien habla espa~ol aqui?? |
| 03:12.14 | onitaL | LtL, you're right, sorry |
| 03:12.35 | LtL | onitaL: no problem at all, good reminder for all. |
| 03:12.57 | fghd | yeah, i found the solution |
| 03:13.02 | LtL | Damter: try #debian-es |
| 03:13.14 | red_dragon | fghd: debian-russian has about 20 people in it |
| 03:13.53 | fghd | red_dragon: russian community is horrible |
| 03:14.01 | red_dragon | :( |
| 03:14.08 | *** join/#debian colt (~noreply@96.241.64.28) |
| 03:14.24 | onitaL | fghd, what command are you using so far? |
| 03:14.41 | red_dragon | well, it's good that you found the solution, hope you have better luck beating the language barrier next time. :) |
| 03:14.43 | fghd | ugh, my solution is borken |
| 03:15.27 | *** join/#debian Malsasa (~quassel@114.79.63.54) |
| 03:15.30 | *** join/#debian hando (~radu@ip70-176-176-198.ph.ph.cox.net) |
| 03:16.35 | *** part/#debian xcynthi (~xcynthx@unaffiliated/xcynthi) |
| 03:17.11 | LtL | fghd: touch file2 ; cat file1 > file2 ; cat file1 >> file2 .. not pretty but it will work. |
| 03:17.30 | *** join/#debian raSter^ (raster@gateway/shell/elitebnc/x-eawdynmxjsrrwwkh) |
| 03:17.37 | fghd | onitaL: pipe and output redirections, like fghd@fghd-RoverBook:~/Документы/Unixex$ echo "Test.txt" > test.txt |
| 03:17.38 | fghd | fghd@fghd-RoverBook:~/Документы/Unixex$ cat test.txt | tee test.txt |
| 03:17.38 | fghd | Test.txt |
| 03:19.11 | *** join/#debian BenNZ (~Ben__@226.7.252.27.dyn.cust.vf.net.nz) |
| 03:19.40 | fghd | but i also have an another interesting question :) |
| 03:21.11 | onitaL | fghd, I don't undestand what you are trying to accomplish |
| 03:21.43 | *** join/#debian Konomi (~Konomi@unaffiliated/konomi) |
| 03:22.10 | LtL | onitaL: he wants one file repeated into itself. appended more accurately |
| 03:22.19 | LtL | i think! |
| 03:22.36 | onitaL | lt_dan, what's what I thought so and asked, and he said he doesn't want to append |
| 03:22.39 | onitaL | err |
| 03:22.43 | onitaL | LtL, ^ |
| 03:22.59 | fghd | onitaL: copy the contents of the file in the same file |
| 03:24.22 | LtL | fghd: i told you what will work in cli. in a gui, well.. easy. |
| 03:25.18 | Some_Person | My dad needs to be able to access a site that relies on an ActiveX control. What's the best way to do this? |
| 03:25.21 | LtL | onitaL: ah, well then.. i'm befuddled :) |
| 03:25.30 | *** join/#debian sysrqalt (~brock@2601:7:1c40:103:5054:ff:fec0:b173) |
| 03:26.33 | fghd | LtL: we can't use another file :) |
| 03:27.10 | LtL | fghd: you can rename it back again, i don't see a problem |
| 03:27.16 | Some_Person | Am I going to have to install IE in Wine? |
| 03:28.02 | LtL | fghd: are you on a server, if not just use a GUI app. |
| 03:28.16 | LtL | perish the thought. |
| 03:29.08 | Vicissitude | Some_Person, or run a virtual machine |
| 03:29.32 | Some_Person | Vicissitude: I don't think a VM would work too well on the PC he's using. |
| 03:30.00 | Some_Person | It's an older single-core machine with no hardware virtualization |
| 03:30.00 | *** mode/#debian [+l 1338] by debhelper |
| 03:30.34 | *** join/#debian kj4 (~sparzok@cpe-075-181-092-128.carolina.res.rr.com) |
| 03:31.35 | Some_Person | Why are companies still using ActiveX in 2013? |
| 03:31.50 | Vicissitude | most likely because people are still using IE |
| 03:32.12 | onitaL | or can't afford to upgrade systems |
| 03:33.19 | *** join/#debian spade (~rheturd@cm-84.209.1.11.getinternet.no) |
| 03:33.33 | Some_Person | It's a camera system at my dad's work that he wants to be able to monitor from home |
| 03:33.51 | *** join/#debian codesoup (~codesoup@69-165-138-68.dsl.teksavvy.com) |
| 03:34.25 | Some_Person | was installed this year |
| 03:34.53 | LtL | Some_Person: doesn't the cam system have a java option instead of activex? |
| 03:34.54 | *** part/#debian bollullera (~anuxi@89.7.24.109) |
| 03:36.00 | Some_Person | LtL: Not that I can see. If you try to access it in a browser other than IE it just tells you to use IE |
| 03:36.02 | *** join/#debian Dan39 (~ddan39@unaffiliated/dan39) |
| 03:36.31 | *** join/#debian Rusty1 (~Rusty1@cpe-74-70-250-84.nycap.res.rr.com) |
| 03:36.39 | *** join/#debian k-t_ (~kt@p5DE861A2.dip0.t-ipconnect.de) |
| 03:37.17 | LtL | Some_Person: I see, dreadful. I'd rather drink paint than use MSIE. |
| 03:37.33 | Some_Person | As far as I know, the ActiveX control and an iOS app are the only way the cameras can be accessed |
| 03:40.32 | LtL | Some_Person: I hope he didn't pay much for the program. </ot> |
| 03:40.54 | Some_Person | LtL: He has no control over what they buy |
| 03:40.59 | LtL | Some_Person: webcam live used to do both, but that was years ago. |
| 03:41.47 | LtL | Some_Person: get a second box. or do the VM thing, which i don't even know if it would do activex in a VM. |
| 03:42.13 | Some_Person | A second box just to access the cameras? That would be overkill |
| 03:42.46 | LtL | Some_Person: agreed, but hey can be had cheap |
| 03:42.53 | LtL | *they |
| 03:43.06 | *** join/#debian Yitro (~Yitro@101.164.245.158) |
| 03:43.31 | Some_Person | I'm guessing there's no other way I can try to get into these cameras, right? |
| 03:43.57 | LtL | Some_Person: not without ActiveX |
| 03:44.22 | LtL | MS strikes again. |
| 03:44.22 | Some_Person | The iOS app isn't using ActiveX though |
| 03:44.24 | onitaL | Some_Person, I was thinking that the cams might broadcast in udp/tcp and vlc could stream. the problem would be to forward the ports out of the router |
| 03:44.26 | red_dragon | I thought wine had support for activex? |
| 03:44.58 | james41382 | What does anyone think about trying to upgrade cryptsetup to 1.6 in wheezy? I know this is the package in sid and that installing packages from sid is a bad idea. |
| 03:45.06 | Some_Person | onitaL: Yeah, I'm the one who set up the router, and only port 80 is forwarded |
| 03:45.19 | Some_Person | which is enough for both the ActiveX and iOS app to work |
| 03:45.40 | LtL | Some_Person: iOS is MAC right... interesting |
| 03:45.46 | onitaL | Some_Person, ok, nmap the cams, or google the model to see if they broadcast |
| 03:45.54 | *** part/#debian fghd (~fghd@188.186.84.12) |
| 03:46.38 | LtL | Some_Person: change the user-agent if browser config :) longshot |
| 03:46.43 | LtL | *in |
| 03:46.51 | onitaL | Some_Person, it's usually vlc rtsp://cams-ip |
| 03:47.17 | *** join/#debian locate (~Icedove@27.10.105.32) |
| 03:47.18 | onitaL | rstp* or something like that |
| 03:47.36 | Some_Person | onitaL: It's multiple cams on a server though |
| 03:48.27 | *** join/#debian optimusprimem (~globo_com@177.53.180.133) |
| 03:48.27 | *** join/#debian optimusprimem (~globo_com@unaffiliated/optimusprimem) |
| 03:49.50 | LtL | Some_Person: i'm not a wine person, but i would try it. |
| 03:51.11 | *** join/#debian Se-bash (~seba@unaffiliated/se-bash) |
| 03:51.35 | Some_Person | onitaL: I don't have a model number unfortunately. |
| 03:52.08 | Some_Person | And yeah, it says "Please Use Microsoft Internet Explorer 7 or Higher. Your Browser is : Netscape" |
| 03:52.45 | *** join/#debian vladuke__ (~vladuke@178.130.42.7) |
| 03:53.25 | Some_Person | LtL: I don't typically use wine either, but I see no real alternative here |
| 03:53.44 | *** join/#debian yano (yano@freenode/staff/yano) |
| 03:53.47 | LtL | Some_Person: i think you're right. |
| 03:54.15 | *** join/#debian deadalnix (~deadalnix@i118-21-142-231.s30.a048.ap.plala.or.jp) |
| 03:55.17 | red_dragon | Some_Person: the browser in wine is a modified firefox with activex support, try that first, but if that does not work, install ie7 with "winetricks". |
| 03:55.32 | Some_Person | red_dragon: Wine comes with a browser? |
| 03:55.58 | red_dragon | i...maybe...it was so long ago, I think it did once |
| 03:56.07 | Some_Person | And firefox can have ActiveX support? |
| 03:56.18 | red_dragon | it can on windows |
| 03:56.34 | *** join/#debian AlexandreMBM (~alexandre@wikimedia/AlexandreMBM) |
| 04:00.26 | *** join/#debian Garda (7bf37a60@gateway/web/freenode/ip.123.243.122.96) |
| 04:01.29 | *** join/#debian DemonJester (~DemonJest@fedora/DemonJester) |
| 04:04.55 | *** join/#debian edgar-rft (~GOD@HSI-KBW-078-043-120-047.hsi4.kabel-badenwuerttemberg.de) |
| 04:05.31 | *** join/#debian wathek_ (~wathek@183.83.138.58) |
| 04:07.10 | james41382 | Well there you go just install Windows... =] |
| 04:07.26 | dvs | !lart james41382 |
| 04:07.27 | dpkg | pushes the wall down onto james41382 whilst whistling innocently |
| 04:07.44 | LtL | hehe |
| 04:08.29 | *** join/#debian fmph (5fd3bc33@gateway/web/freenode/ip.95.211.188.51) |
| 04:08.37 | james41382 | crawls out from under the rubble |
| 04:09.22 | LtL | Some_Person: james41382 is right i fear. |
| 04:09.39 | fmph | Can somebody please help with my problem? My mouse seems to flicker when I try to move windows, drag scroll bars, etc. Really anything involving the left mouse button. It might be a nouveau problem, but I added nomodeset to the boot options. I'm running Debian 7.1, with KDE 4.8.4. What could be causing this, and how can I fix it? |
| 04:10.02 | Some_Person | I've finally got my dad using Linux after years of resistance, but this is a legitimate problem that may force him off it |
| 04:10.51 | LtL | fmph: trying changing anything in mouse preferences, then change it. strange ideas sometimes work |
| 04:10.57 | *** join/#debian MekkaGodzilla (~MekkaGodz@cxr69-3-82-224-150-128.fbx.proxad.net) |
| 04:11.03 | LtL | change it back. argh |
| 04:11.13 | fmph | LtL: Alright, I'll try |
| 04:11.16 | *** part/#debian red_dragon (~a@c83-248-227-30.bredband.comhem.se) |
| 04:11.23 | james41382 | He needs activex support for a system of security cameras at home? |
| 04:11.41 | Shadur | That sounds like an absolutely horrible setup. |
| 04:11.52 | LtL | james41382: at his worksite, remote i believe |
| 04:12.14 | fmph | LtL: That didn't work, it still flickers like it did before. |
| 04:12.16 | james41382 | So he uses a VPN to access his office to view the cameras? |
| 04:12.22 | LtL | Some_Person: get a second box! used ones are like... free |
| 04:12.37 | Shadur | ActiveX is a pile of garbage and secuity nightmares all wrapped up in a proprietary package of attempted browser/OS lockout. |
| 04:12.56 | Some_Person | james41382: He's a manager for a condominium, and he wants to be able to view the security cameras from home |
| 04:13.13 | Some_Person | They're accessed through a web browser (no VPN) |
| 04:13.27 | LtL | Some_Person: that'd be cool. too bad the company bought cheap software. |
| 04:13.44 | james41382 | Anything here.. ? https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-fbdev/+bug/1034470 |
| 04:13.51 | LtL | well, maybe not cheap, certainly not versatile. |
| 04:14.09 | Some_Person | They apparently have an Android app now. Does that help me? |
| 04:14.10 | *** join/#debian Steeler (~steeler@dynamic-adsl-94-34-52-204.clienti.tiscali.it) |
| 04:14.22 | fmph | james41382: I believe I've looked through that bug report and didn't find anything. I'll give it a go again though. |
| 04:14.31 | james41382 | Some_Person: So he puts in http://www.mycondos.com/cameras and it forwards to a page with cameras? |
| 04:14.48 | james41382 | fmph: Sorry just skimming google.. I didn't really read through.. =] |
| 04:15.24 | *** join/#debian fraktor (~fraktor@174-19-92-120.omah.qwest.net) |
| 04:15.30 | Some_Person | james41382: He puts http://ip_address_of_the_camera_server into IE, logs in, and it shows the cameras |
| 04:15.33 | LtL | james41382: there's tons of nice multiple cam monitor software out there. it's pretty cool actually. |
| 04:15.41 | fraktor | hey guys |
| 04:15.52 | LtL | fraktor: greetings |
| 04:15.55 | fraktor | I've had this debian (well, not exactly 'pure' debian, but debian-based) install for a while |
| 04:16.06 | fraktor | and I'd like to revert it to a freshly installed state without using the install disk. |
| 04:16.16 | fraktor | I can copy my home folder to an external drive, tho. |
| 04:17.13 | james41382 | fraktor: You can copy it anywhere you like. |
| 04:17.16 | LtL | fraktor: should be able to with cp -a |
| 04:17.23 | fraktor | well, yes. |
| 04:17.35 | fraktor | but how would I go about reverting my install without using the install disk? |
| 04:17.50 | fraktor | what I want to do is basically uninstall all non-default packages, reinstall all default packages, reset configs, etc. |
| 04:18.01 | james41382 | Some_Person: Interesting.. never used anything like that. For that he needs activex? |
| 04:18.03 | LtL | fraktor: download debian. |
| 04:18.04 | *** join/#debian PcJamesy (~James@unaffiliated/pcjamesy) |
| 04:18.22 | fraktor | well, I'm not using pure debian. |
| 04:18.23 | james41382 | LtL: I haven't used any camera / video monitoring software |
| 04:18.26 | fraktor | also, what do you mean, "download" it? |
| 04:18.44 | LtL | fraktor: no offense, but 'based on debian' distro's are taboo in #debian |
| 04:18.51 | Some_Person | james41382: Unfortunately, yes, it requires ActiveX |
| 04:18.51 | *** join/#debian vrkalak (~vrkalak@173.5.40.200) |
| 04:18.55 | fraktor | alright. |
| 04:19.02 | fraktor | but the people in #crunchbang aren't responsive. |
| 04:19.06 | LtL | james41382: it's great but you need windows afiak. |
| 04:19.32 | *** part/#debian AlexandreMBM (~alexandre@wikimedia/AlexandreMBM) |
| 04:19.36 | Some_Person | If you try to access it from a browser other than IE, you get a message saying "Please Use Microsoft Internet Explorer 7 or Higher. Your Browser is : Netscape" |
| 04:19.43 | james41382 | fraktor: You can download the netinst iso from the debian site it's not too big. I fits on one cd and then install from network. But maybe first research if your hardware is supported by Debian or check if you need to download any firmware for the networking devices.. ie wireless adapter or ethernet. |
| 04:19.45 | LtL | fraktor: well, you can save/copy /home/ not a problem. |
| 04:20.21 | james41382 | I run Windows... heh. |
| 04:20.25 | james41382 | hides from dpkg |
| 04:20.26 | *** join/#debian MekkaGodzilla (~MekkaGodz@cxr69-3-82-224-150-128.fbx.proxad.net) |
| 04:20.34 | fraktor | james41382, I installed Fedora from a net install disk before. However, sometime after I installed crunchbang, something went rather wrong with my disk drive. |
| 04:20.36 | fraktor | *disc |
| 04:20.46 | fraktor | it was wonky before, but now I can't boot from it. |
| 04:21.01 | Some_Person | I really think it's sad that ActiveX is still used in these sorts of applications |
| 04:21.05 | james41382 | fraktor: Is it just the Crunchbang on there now? |
| 04:21.19 | *** join/#debian MekkaGodzilla (~MekkaGodz@cxr69-3-82-224-150-128.fbx.proxad.net) |
| 04:21.23 | james41382 | Some_Person: Like people using Flash when they should all just go to HTML5? |
| 04:21.49 | *** join/#debian Ard1t (~ard1t@unaffiliated/ard1t) |
| 04:21.49 | *** join/#debian anonnumberanon (~anonnumbe@cpe-69-203-110-205.nyc.res.rr.com) |
| 04:22.00 | Some_Person | james41382: ActiveX is far worse than Flash. At least Flash works in browsers other than IE |
| 04:22.11 | james41382 | Some_Person: Point taken. |
| 04:22.23 | Some_Person | and on operating systems other than Windows |
| 04:22.45 | james41382 | Some_Person: I recall recently trying to get Netflix to run on Debian.. what an ordeal.. lol. |
| 04:22.55 | Some_Person | james41382: That's Silverlight |
| 04:23.03 | *** part/#debian alnr (~alan@unaffiliated/alnr) |
| 04:23.24 | Some_Person | which thankfully is being discontinued |
| 04:23.27 | james41382 | Some_Person: Yeah.. someone worked out something with Wine and a bit of finesse I think, but I didn't bother with it. |
| 04:23.31 | LtL | add silverlight to the $hitlist. |
| 04:26.22 | Damter | !join #md5decrypter |
| 04:27.03 | james41382 | Some_Person: If he has to use ActiveX just keep a Windows box around on the home network, but that's no reason Linux can't be his main OS. You know? |
| 04:27.22 | Some_Person | james41382: He's not going to want to switch between computers or OSes |
| 04:28.31 | james41382 | Some_Person: No I suppose not. I would.. heh. |
| 04:29.19 | *** join/#debian Rosco2 (~RossGammo@188-178-212-240-dynamic.dk.customer.tdc.net) |
| 04:29.34 | *** join/#debian nvz (~nvz@unaffiliated/nvz) |
| 04:32.27 | *** join/#debian DemonJester (~DemonJest@cpe-184-153-69-193.buffalo.res.rr.com) |
| 04:32.27 | *** join/#debian DemonJester (~DemonJest@fedora/DemonJester) |
| 04:32.42 | *** join/#debian fedesilva (~fedesilva@r186-52-146-30.dialup.adsl.anteldata.net.uy) |
| 04:33.05 | james41382 | I am inexperienced and used a mainstream router for years with stock firmware. Recently switched to DD-WRT and I have been getting into it a little bit. It's amazing everyday at least one person tries to get into ssh. |
| 04:36.29 | LtL | james41382: install fail2ban |
| 04:36.45 | Some_Person | What the hell? I have to enable multiarch to install wine on a 64-bit system? |
| 04:36.51 | james41382 | LtL: eh? |
| 04:37.47 | LtL | james41382: fail2ban is a great for cutting down on those pesky ssh login nuisances |
| 04:38.07 | LtL | Some_Person: yes i think wine is only 32bit |
| 04:38.46 | james41382 | I am wondering if it is the same person because both yesterday and today there were from the same area. |
| 04:38.53 | fraktor | james41382, no, it's a dual boot system. |
| 04:38.58 | fraktor | sorry, was AFK. |
| 04:38.59 | james41382 | China.. damn chinese trying to hack my router.. pfft. |
| 04:39.25 | james41382 | fraktor: Fedora and Crunchbang? |
| 04:39.34 | fraktor | no |
| 04:39.39 | fraktor | windows and Crunchbang. |
| 04:39.46 | *** join/#debian lulz0r (~lulz0r@aftr-37-24-146-62.unity-media.net) |
| 04:39.48 | fraktor | I replaced fedora, which left me with a LVM partition mess. |
| 04:39.48 | james41382 | Oh.. |
| 04:40.02 | fraktor | I think I'll just try to reinstall crunchbang from the disk. |
| 04:40.05 | fraktor | *disc |
| 04:40.09 | james41382 | Why didn't you just save your files and repartition? |
| 04:40.11 | fraktor | maybe my disc drive will work by then. |
| 04:40.17 | fraktor | I don't know. |
| 04:40.35 | fraktor | I planned to remount the home thing, but didn't do it at install, and didn't want to ruin my system with a broken fstab. |
| 04:40.45 | james41382 | Okay.. I installed LVM2 this time around... we'll see what happens. I like the idea of being able to resize my partitions though. |
| 04:41.23 | fraktor | so I have this partition that is 260GB. |
| 04:41.29 | fraktor | but I can only use 50 because of how I set it up. |
| 04:42.02 | fraktor | hold on for a bit |
| 04:44.33 | Some_Person | I never thought I'd be setting up IE on a Linux system |
| 04:46.14 | *** join/#debian shabius (~shaburov1@128-68-67-74.broadband.corbina.ru) |
| 04:47.09 | *** join/#debian rog1121 (~rog1121@unaffiliated/rog1121) |
| 04:47.34 | rog1121 | I cant seem to remove a source from updating in apt, I removed it in the sources list but it keeps showing up |
| 04:48.53 | *** join/#debian xlinkz0 (~xlinkz0@5-13-199-32.residential.rdsnet.ro) |
| 04:49.17 | james41382 | I wonder if I can make fail2ban from source on my dd-wrt router.. |
| 04:49.26 | xlinkz0 | i have a virtualbox instance of wheezy that sometimes has an ipv6 IP and sometimes an ipv4 ip, can I make it constantly use ipv4? |
| 04:49.34 | james41382 | rog1121: apt-get update |
| 04:49.56 | rog1121 | james41382, it keeps showing up in ther |
| 04:49.58 | rog1121 | there* |
| 04:50.04 | rog1121 | Ive removed it form sources.list |
| 04:50.11 | james41382 | rog1121: Okay.. that's wierd. |
| 04:50.15 | *** join/#debian rryoumaa (~unknown@ip68-226-110-213.ph.ph.cox.net) |
| 04:50.52 | rog1121 | I only have debian.org and one other repo for plex |
| 04:50.58 | rryoumaa | after i install iceweasel-noscript, and exit and restart iceweasel, noscript should appear, right? |
| 04:51.09 | rog1121 | but this ubuntu launchpad source wont quit |
| 04:51.13 | rryoumaa | is there anything else i should do to get it to appear? |
| 04:51.20 | LtL | rog1121: aptitude hold package, but installed from source? not sure |
| 04:52.45 | LtL | rog1121: /join #ubuntu ? |
| 04:53.02 | rog1121 | LtL, its wheezy |
| 04:53.16 | rog1121 | I just added this source for sabnzbd a while back |
| 04:53.29 | rog1121 | I dont have aptitude |
| 04:53.53 | ectospasm | I am having a brain fart: if I install a new kernel, and then hibernate the machine... when I thaw it back out it should have the new kernel loaded, shouldn't it? |
| 04:53.55 | *** join/#debian MrHotsauce (~NeedleInY@c-67-173-96-28.hsd1.in.comcast.net) |
| 04:54.22 | ectospasm | I'm tired of starting with an empty pair of workspaces |
| 04:55.30 | *** join/#debian trifolio6 (~h@62.43.62.203.dyn.user.ono.com) |
| 04:55.52 | mumpitze1 | ectospasm: no, there won't be a new kernel running then |
| 04:56.38 | ectospasm | mumpitze1: would grub know that it had been hibernated, and load the old kernel? |
| 04:57.09 | fmph | I need some help with my TTY. When I go to TTY1-6, the resolution is pretty low. It makes it hard to write scripts or use elinks in TTY1-6. I'm using a laptop that has nVidia, so I get nouveau errors when I don't add "nomodeset" to the boot options in grub. Is this the cause of the low resolution, and is there a way to fix it? I'm using Debian 7.1 and KDE 4.8. |
| 04:57.39 | *** join/#debian Henesy (~Henesy@adsl-75-23-120-177.dsl.peoril.sbcglobal.net) |
| 05:02.33 | *** join/#debian rog1121 (~rog1121@unaffiliated/rog1121) |
| 05:06.09 | mumpitze1 | !tell fmph about errors |
| 05:06.32 | somiaj | fmph: do you require the 3d of the non-free nvidia drivers? |
| 05:06.45 | *** join/#debian piedpipe1 (~pi@CPE-121-218-209-79.lnse4.cht.bigpond.net.au) |
| 05:07.19 | somiaj | fmph: in general framebuffers for tty's and nvidia non-free don't always work together. It has been known to work with the vesa (old school) framebuffer, but most of those options have been depricated. |
| 05:07.28 | mumpitze1 | he already runs nouveau, so that's unlikely |
| 05:07.41 | fmph | mumpitze1: I cant get the exact error message without rebooting. The problem isn't the nouveau error, the problem is the mouse flickering |
| 05:07.52 | somiaj | oh nouveau is using kms, so he should be able to change the resolutions fairly easy |
| 05:08.08 | mumpitze1 | fmph: most probably the nomodeset causes the flickering |
| 05:08.35 | fmph | mumpitze1: I'm not able to boot without adding nomodeset though. It freezes while it boots. |
| 05:08.38 | somiaj | fmph: does the mouse only flicker in X? |
| 05:08.50 | mumpitze1 | nomodeset disables kms |
| 05:08.57 | fmph | somiaj: Yes, where else would it flicker? |
| 05:09.08 | somiaj | fmph: you can have gpm mouse in a console |
| 05:09.11 | mumpitze1 | fmph: you can have mouse support in a tty withz gpm |
| 05:09.24 | somiaj | fmph: can you set weither xorg uses a hardware vs software cursor....let me see |
| 05:09.32 | Some_Person | Ugh, it seems I may need a newer version of wine than the one in debian stable's repos |
| 05:09.32 | *** join/#debian SeySayux (SeySayux@libsylph/developer/seysayux) |
| 05:09.34 | mumpitze1 | fmph: running the proprietary nvidia driver is not an option? |
| 05:09.54 | fmph | mumpitze1: I'm not sure, I don't know too much about nvidia |
| 05:10.01 | *** mode/#debian [+l 1332] by debhelper |
| 05:10.02 | mumpitze1 | fmph: what nvidia chip is it? |
| 05:10.10 | mumpitze1 | and what laptop? |
| 05:10.35 | somiaj | looks like you can disable HWCursor, one second |
| 05:10.46 | fmph | fmph: I don't know what nvidia chip it is, "lspci -nn | grep VGA" doesn't give a model |
| 05:10.52 | somiaj | Some_Person: it isn't that hard to compile a custom wine package, care for some instructions? |
| 05:11.16 | somiaj | fmph: my guess is your /var/log/Xorg.0.log will say what chipset you have |
| 05:11.16 | Some_Person | somiaj: Really? I have to do that just so my dad can access the stupid cameras at his work |
| 05:11.26 | somiaj | Some_Person: do you use 64 bit? |
| 05:11.32 | Some_Person | somiaj: Yes |
| 05:11.34 | mumpitze1 | fmph: please pastebin the output of lspci -nn then |
| 05:11.37 | *** join/#debian vivid (~vivid@c-76-104-215-159.hsd1.wa.comcast.net) |
| 05:11.42 | *** join/#debian dwiz1 (~dan@60-242-244-18.static.tpgi.com.au) |
| 05:12.43 | *** join/#debian aarcane (~aarcane@99-42-64-115.lightspeed.irvnca.sbcglobal.net) |
| 05:13.20 | somiaj | fmph: there is a HWCursor and SWCursor option for the nouveau driver. My guess is you are using HW and if you switch to software you will get the flickering to go away (at a preformace hit) |
| 05:13.38 | somiaj | Some_Person: do you know how to build a 32bit chroot with debootstrap? |
| 05:13.43 | Some_Person | No |
| 05:13.56 | fmph | somiaj: How would I go about switching it? I haven't installed any drivers yet. |
| 05:14.25 | somiaj | fmph: you will have to write a custom xorg.conf file, so far not finding any thing that would be easy to follow on the net. |
| 05:15.10 | somiaj | Some_Person: it is very easy, basically you will have to 1) install debootstrap, 2) use it to install a 32bit version of debian in your file system $HOME/wheezy_32bit/ will work, or any directory |
| 05:15.19 | fmph | somiaj: I don't know if I know enough to create a custom xorg.conf file |
| 05:15.47 | *** join/#debian Quashie (~boingredd@38.116.199.162) |
| 05:15.51 | somiaj | fmph: luckly you will only need the lines to set the SWCursor option the rest should be automatic, also paste your /var/log/Xorg.0.log at paste.debian.net |
| 05:16.21 | somiaj | Some_Person: installing the chroot is easy, 'deboostrap <some options> <directory>', once you build it you will have to mount --bind /proc, /dev and /sys inside the chroot |
| 05:16.47 | fmph | somiaj: My /var/log/Xorg.0.log file is >1k lines, what would I grep for to find relevant lines? |
| 05:17.19 | somiaj | Some_Person: after that you run the command 'chroot $HOME/wheezy_32bit/' and you will become root inside the 32bit chroot (now you are inside the new install it will have small set of tools). |
| 05:17.37 | somiaj | Some_Person: inside the 32bit chroot you can follow these instructions to build a wine package, http://paste.debian.net/36758/ |
| 05:17.52 | somiaj | Some_Person: Note you don't have to do this on the same machine you will install the package on. Just make sure your chroot is the same version of debian |
| 05:17.53 | Some_Person | There's no way for me to just install the latest stable wine? |
| 05:18.15 | somiaj | Some_Person: there are no packages made for debian wheezy from winehq.org |
| 05:18.29 | Some_Person | great... |
| 05:18.45 | somiaj | Some_Person: you have to build it as 32bit software, and building a package inside the chroot I think is eaier than the hassel of just compiling the source |
| 05:19.00 | *** join/#debian olegfusion (~olegfusio@46.191.226.49) |
| 05:19.11 | somiaj | fmph: why so big? has xorg been running for a while. Could you quit xorg (stop your display manager) then restart xrog so I can get a fresh log file to look at? |
| 05:19.19 | somiaj | fmph: I'd preer the whole thing |
| 05:19.41 | rog1121 | im getting quite mad over this whole luchpad source |
| 05:19.45 | rog1121 | it just wont go away |
| 05:19.51 | Some_Person | somiaj: I could go through all that and then have it not work anyway |
| 05:19.54 | rog1121 | I specified not to use pdiffs |
| 05:19.59 | rog1121 | I rebooted |
| 05:20.02 | rog1121 | removed the source |
| 05:20.10 | rog1121 | and its still updating with it in the list |
| 05:20.12 | fmph | somiaj: Yes, Xorg has been running for about 20 hours. If I restart X, will that close out my browser? |
| 05:20.39 | somiaj | fmph: yes, but most browsers can restore the session that was there when it closed |
| 05:20.44 | Some_Person | The site he needs isn't working in IE on this version of wine (clicking the login button does nothing, haven't even gotten to installing the ActiveX control yet); I don't know for sure that later versions fix it |
| 05:21.04 | somiaj | Some_Person: well seems 1.4.1 is the only packages I can find premade for wheezy. If you need newer you'll have to make one yourself |
| 05:21.11 | somiaj | Some_Person: the only packages I'm finding are compiled for sid |
| 05:21.22 | *** join/#debian xzz (836bc075@gateway/web/freenode/ip.131.107.192.117) |
| 05:21.36 | fmph | somiaj: Right now I'm also talking with another person on my browser on a different site, I'll restart X after I'm done talking with him. |
| 05:22.10 | somiaj | fmph: no problem. Again I think figuring out how to switch from HWCursor to SWCursor may stop the flickering. But no guarntee |
| 05:22.28 | somiaj | fmph: the xorg log file will just help me see what the defaults are being detected as |
| 05:22.40 | Some_Person | somiaj: I would just hate to go through all this work just to find out the stupid button still doesn't work |
| 05:22.44 | rog1121 | has anyone had problems with an ubuntu launchpad source not clearing from wheezy |
| 05:23.06 | *** join/#debian Konomi (~Konomi@unaffiliated/konomi) |
| 05:23.41 | somiaj | rog1121: what do you mean? Why did you have ubuntu sources in wheezy in the first place? |
| 05:23.45 | somiaj | no sane person should have that issue |
| 05:23.51 | rog1121 | it was for sabnzbd |
| 05:23.55 | rog1121 | installed once package |
| 05:23.58 | rog1121 | removed it long time ago |
| 05:24.04 | rog1121 | removed the source as well |
| 05:24.21 | rog1121 | it shows up in apt-get update though |
| 05:25.04 | somiaj | rog1121: check /etc/apt/sources.list.d/ -- do you see any additional files there with the sources? |
| 05:25.22 | somiaj | rog1121: also very very very bad juju. Don't mix, you get to deal with what ever damage was caused. |
| 05:25.39 | rog1121 | it was off this |
| 05:25.39 | rog1121 | https://forums.sabnzbd.org/viewtopic.php?f=16&t=9844 |
| 05:26.17 | rog1121 | ok wow |
| 05:26.21 | rog1121 | it was in there |
| 05:26.27 | rog1121 | cant believe i didnt think of that |
| 05:28.14 | somiaj | rog1121: and anything off the internet can be trusted? |
| 05:28.21 | *** join/#debian dorito_125 (~dorito_12@108-71-149-228.lightspeed.mmphtn.sbcglobal.net) |
| 05:28.31 | rog1121 | thats not what I said, that was just so you knew what i did |
| 05:28.35 | *** join/#debian Interruptus (~Interrupt@46-116-4-105.bb.netvision.net.il) |
| 05:28.46 | rog1121 | sorry for the trouble |
| 05:29.02 | somiaj | rog1121: ahh, really don't care. Just saying dno't every add no debian sources or mix debian versions. Very bad juju if you do. |
| 05:29.09 | somiaj | rog1121: no problem, glad you found that hidden source, (: |
| 05:29.29 | rog1121 | thanks, its somehow still showing up in apt-cache policy though |
| 05:29.37 | rog1121 | guess il reboot one more time |
| 05:32.15 | rog1121 | any idea how I would get rid of this? |
| 05:32.16 | rog1121 | root@nas:~# apt-cache policy sabnzbdplus |
| 05:32.16 | rog1121 | sabnzbdplus: |
| 05:32.16 | rog1121 | <PROTECTED> |
| 05:32.16 | rog1121 | <PROTECTED> |
| 05:32.16 | *** kick/#debian [rog1121!~debhelper@unaffiliated/debhelper] by debhelper (flood) |
| 05:32.17 | *** join/#debian adam8157 (~adam@unaffiliated/adam8157) |
| 05:32.30 | *** join/#debian rog1121 (~rog1121@unaffiliated/rog1121) |
| 05:32.37 | rog1121 | guess I should have used pastebin |
| 05:34.39 | somiaj | rog1121: what do you mean get rid of that, all that does is give you info about that package |
| 05:34.58 | rog1121 | somiaj, it should be listing the ubuntu version though |
| 05:35.03 | rog1121 | I think |
| 05:35.26 | somiaj | rog1121: once you updated it no longer knows that sources, and according to what I saw, that packge is not installed |
| 05:35.35 | somiaj | rog1121: rember you removed the ubuntu source which is good |
| 05:35.46 | zacts | where is wheel group on debian 7? |
| 05:35.49 | *** join/#debian vivid (~vivid@c-76-104-215-159.hsd1.wa.comcast.net) |
| 05:36.01 | LtL | rog1121: run updatedb, maybe the box will forget it. |
| 05:36.22 | LtL | install aptitude, put a hold on it. |
| 05:36.39 | somiaj | zacts: I don't think it is really used, what do you want to do? |
| 05:36.55 | zacts | somiaj: I want to disable users from being able to su into root |
| 05:36.59 | rog1121 | so it just remembers it somehow? I dont have to worry about getting it from that source? |
| 05:37.11 | mumpitze1 | !wheel |
| 05:37.11 | dpkg | well, wheel is the traditional name of security group 0 in BSD (from slang for "big wheel" as a powerful person). This group is irrelevant in the default Debian configs but you can use the "sudo" group to give users the ability to run commands as root through sudo; ask me about <sudoers>. Alternatively, look at the pam_wheel module for <PAM> which will only allow su to root from members of the wheel group. |
| 05:37.24 | rog1121 | I would like updates, just not from there |
| 05:37.26 | LtL | probably won't work though, rog1121 that ubuntu repo put a hex on you. no pun intended :) |
| 05:37.32 | rog1121 | ill be install from backports |
| 05:37.40 | *** join/#debian dexter2 (~dexter3@71-212-130-174.hlrn.qwest.net) |
| 05:37.42 | *** join/#debian safejav (~safejav@190.188.180.54) |
| 05:37.51 | somiaj | rog1121: you'll have to do it yourself, change the permission of /bin/su (be careful updates my change them back to debian's defaults unforntally) |
| 05:38.03 | zacts | ok, thanks mumpitze1 |
| 05:38.21 | somiaj | rog1121: type 'apt-cache policy', those are the only sources you have access to. I think you got rid of the ubuntu ones |
| 05:38.57 | somiaj | zacts: note my second to last statement to rog1121. But you chould change the permissions of /bin/su and make it so only members of a certain group can run it if you so desire. |
| 05:39.01 | rog1121 | yesh its not in the policy list |
| 05:39.17 | rog1121 | but its in the policy for that certain package |
| 05:39.20 | rog1121 | I guess its nothing |
| 05:39.55 | somiaj | rog1121: it does keep a local record of any installed package. |
| 05:40.03 | rog1121 | ah |
| 05:40.03 | zacts | ok |
| 05:40.32 | rog1121 | damn |
| 05:40.38 | rog1121 | wheezy backports doesent have it |
| 05:40.45 | rog1121 | ill run from source I guess |
| 05:41.52 | somiaj | rog1121: does sid have it? If so /msg dpkg ssb |
| 05:42.01 | rog1121 | sid has it for sure |
| 05:42.04 | rog1121 | I know that |
| 05:42.10 | *** join/#debian oleo (~oleo@xdsl-78-35-143-92.netcologne.de) |
| 05:42.43 | somiaj | you might be able to compile the sid version on wheezy thus making your own backport |
| 05:43.02 | *** join/#debian kj4 (~sparzok@107.228.13.3) |
| 05:43.21 | rog1121 | how would I do that |
| 05:43.35 | *** join/#debian kj4_ (~sparzok@cpe-075-181-092-128.carolina.res.rr.com) |
| 05:44.09 | rog1121 | seems like I add deb-src |
| 05:44.39 | LtL | rog1121: correct |
| 05:45.50 | somiaj | rog1121: /msg dpkg ssb |
| 05:45.59 | somiaj | follow the instructions (Skip the look in backports since you already did that) |
| 05:46.17 | rog1121 | what are the advantages of aptitude |
| 05:46.20 | rog1121 | over apt |
| 05:47.34 | LtL | rog1121: it has far more functions and good at solving dependancies. |
| 05:47.50 | somiaj | rog1121: /msg dpkg why aptitude, /msg dpgk why apt-get |
| 05:48.08 | somiaj | rog1121: I prefer apt-get except for the search ability of aptitude. It is far superior to apt-cache |
| 05:48.32 | rog1121 | what doesent that bot know |
| 05:50.32 | *** join/#debian tnguyen (~Thunderbi@c-68-35-49-173.hsd1.nm.comcast.net) |
| 05:50.36 | rog1121 | I probably should have cd'ed into antoher folder |
| 05:50.46 | rog1121 | my bin directory is full of deb files now |
| 05:51.05 | somiaj | dpkg: what do you not know? |
| 05:51.07 | dpkg | somiaj: I wish you would RTFM. |
| 05:53.01 | *** join/#debian alphazulu (~alphazulu@173-228-31-194.static.sonic.net) |
| 05:55.28 | *** join/#debian elvora (~elvora@c-24-8-156-40.hsd1.co.comcast.net) |
| 05:58.26 | *** join/#debian runners (~chatzilla@AStrasbourg-651-1-82-104.w90-39.abo.wanadoo.fr) |
| 05:59.32 | *** join/#debian mcrandello (~mcrandell@node200.seg75.ucf.edu) |
| 06:00.36 | *** part/#debian mcrandello (~mcrandell@node200.seg75.ucf.edu) |
| 06:01.59 | *** join/#debian fraktor (~fraktor@174-19-92-120.omah.qwest.net) |
| 06:02.22 | fraktor | james41382, I discovered something. |
| 06:02.33 | fraktor | I CAN boot from a CD, but it takes two tries, no matter what. |
| 06:05.33 | *** join/#debian Corerris (~ribe@c83-255-131-198.bredband.comhem.se) |
| 06:05.47 | james41382 | fraktor: That's also strange. You boot and then press something like F12 to select a boot device other than the primary master drive typically. |
| 06:06.38 | james41382 | I have not much experience with iptables can someone take a look at this and tell me is the commands in sshcheck will help prevent someone from attempting to hack into my ssh? http://paste.debian.net/36762/ |
| 06:06.49 | james41382 | s/is/if/ |
| 06:06.52 | fraktor | james41382, yes, that's what happens. |
| 06:07.02 | fraktor | the first time, it just blinks a cursor until I turn it off. |
| 06:07.14 | fraktor | the second time, it blinks for 20 seconds, then comes up with the cd boot screen. |
| 06:07.25 | fraktor | (both of these are after selecting CD from the boot menu) |
| 06:07.30 | james41382 | fraktor: You tested it and repeatedly and the behavior is consistent? |
| 06:08.16 | fraktor | yes. |
| 06:08.32 | fraktor | I remember this happening with the fedora install disk, my crunchbang install disk, and when I rebooted the crunchbang disk, it did the same thing. |
| 06:08.51 | james41382 | fraktor: That sounds really bizarre. |
| 06:09.03 | james41382 | fraktor: So now what? |
| 06:09.10 | Streusel | Anyone know how to truncate a mysql table via command line? or is this #sql stuff? :/ |
| 06:09.44 | fraktor | so now, I make a tarfile of my home folder, copy to an external hard drive, and reinstall. |
| 06:10.30 | somiaj | Streusel: what do you mean by truncate? And yes you can use the mysql shell to send SQL commands to the server via a shell |
| 06:10.34 | *** join/#debian acu2 (~acu@96-42-248-177.dhcp.roch.mn.charter.com) |
| 06:11.03 | Streusel | somiaj empty a table |
| 06:11.12 | somiaj | Streusel: empty or drop? |
| 06:11.13 | james41382 | fraktor: Oh yes... that's right. Nice.. |
| 06:11.19 | Streusel | somiaj empty |
| 06:11.41 | james41382 | fraktor: It sounds like something is wrong with your cd drive.. =] |
| 06:11.43 | somiaj | Streusel: delete from table where 1 |
| 06:11.46 | *** join/#debian locate (~Icedove@27.10.111.60) |
| 06:11.51 | somiaj | Streusel: deletes every row from a table |
| 06:11.54 | fraktor | yes. |
| 06:11.58 | fraktor | it doesn't burn anything either. |
| 06:12.06 | Streusel | somiaj I want to create a cron job that deletes every item in a given table |
| 06:12.08 | fraktor | I'm thinking of replacing it, but I don't know where you get laptop replacement drives. |
| 06:12.17 | james41382 | fraktor: google. |
| 06:12.48 | fraktor | yes. |
| 06:12.50 | fraktor | I mean, I haven't looked. |
| 06:12.51 | somiaj | Streusel: read the man page for mysql (the cli command), you can set it up to do that, and I gave you the sql command |
| 06:13.19 | Streusel | thanks |
| 06:13.23 | Streusel | I'll have a look |
| 06:13.45 | themill | Note that "truncate foo" and "delete from foo where 1" are subtly different operations |
| 06:14.11 | Streusel | truncate also resets auto increments and such if I'm correct |
| 06:14.18 | Streusel | delete just erases every entry in the table |
| 06:14.27 | themill | yes. truncate is also normally faster |
| 06:14.27 | vlt | Hello. I want to install a few pkgs on a machine w/o net. How to download all the depending pkgs so that I can put then to /var/cache/apt manually? |
| 06:14.36 | *** join/#debian spal (~susam@pdpc/supporter/active/spal) |
| 06:14.55 | vlt | aptitude? |
| 06:15.34 | somiaj | Streusel: I think it is something like 'mysql --user foo --password bar database < file.sql'. mysql will then run the sql commands in that file |
| 06:15.46 | Streusel | yeah |
| 06:15.55 | *** join/#debian Leoneof (~Leoneof@unaffiliated/leoneof) |
| 06:16.12 | somiaj | vlt: you can download the packages from packages.debian.org. Once you have them down loaded you can use dpkg -i to install them. NOte you may have to deal/fix any depends that arrise doing this |
| 06:16.17 | *** join/#debian dgeary2_ (~debian@pa49-187-84-39.pa.nsw.optusnet.com.au) |
| 06:16.49 | *** join/#debian jpo (~jpo@unaffiliated/jpo) |
| 06:17.00 | vlt | somiaj: Wasn't there something easier? |
| 06:17.19 | vlt | Like an apt-get command? |
| 06:17.29 | *** join/#debian Konomi (~Konomi@unaffiliated/konomi) |
| 06:17.31 | somiaj | themill: ahh didn't realize there was a truncate command. (: |
| 06:17.54 | Streusel | apt-get update and apt-get upgrade sure creates a lot of cache |
| 06:17.57 | somiaj | vlt: what do you mean? You could download a whole debian cd, and then use apt-cdrom to scan the cd. After that you can install pacakges off that cd with apt-get or aptitude |
| 06:18.30 | somiaj | there are ways of making a custom cd, but if you just want a few packages, I would just grab the .debs you need and use dpkg and not worry about the hassel of setting apt to know about them |
| 06:18.46 | themill | vlt: if apt knows the specific versions you have, then yes, you can copy the .debs into /var/cache/apt/archives |
| 06:19.16 | themill | dpkg: tell vlt about apt offline |
| 06:21.58 | vlt | somiaj, themill: I mean something like "apt-get download-but-not-install pkg1 pkg2" |
| 06:22.14 | themill | vlt: what dpkg just told you |
| 06:22.27 | *** join/#debian mavhc (~mavhc@cpc3-basf10-2-0-cust617.12-3.cable.virginmedia.com) |
| 06:22.28 | vlt | themill: Thanks |
| 06:23.54 | somiaj | vlt: there is a --download-only option for apt-get |
| 06:25.27 | *** part/#debian fraktor (~fraktor@174-19-92-120.omah.qwest.net) |
| 06:26.16 | *** join/#debian matanya (~matanya@wikimedia/matanya) |
| 06:27.26 | *** join/#debian mavhc (~mavhc@cpc3-basf10-2-0-cust617.12-3.cable.virginmedia.com) |
| 06:28.21 | Streusel | where does the file save to if you use crontab -e ? |
| 06:29.46 | *** join/#debian patterson (~patterson@c-67-188-24-218.hsd1.ca.comcast.net) |
| 06:30.55 | *** join/#debian zhulikas (~meh@78-60-186-41.static.zebra.lt) |
| 06:31.00 | zhulikas | hey fellas |
| 06:31.09 | zhulikas | my inner ip is dynamically assigned by a router |
| 06:31.18 | zhulikas | is there a way to get notified about when does my inner ip change? |
| 06:31.33 | zhulikas | there is a /etc/network, where apparently I can put scripts which will get executed upon network change |
| 06:32.06 | zhulikas | could I do that here? |
| 06:32.07 | onitaL | seems you'd prefer to have static ip |
| 06:32.48 | zhulikas | I would, but I cannot get to router administrative pages |
| 06:33.23 | Streusel | ahh found it |
| 06:33.58 | zhulikas | this device is raspberry pi |
| 06:34.01 | zhulikas | and I always want to know |
| 06:34.06 | zhulikas | to which IP I need to ssh |
| 06:34.15 | zhulikas | so I created a web service which accepts calls |
| 06:34.19 | zhulikas | and saves latest IP address of it |
| 06:34.22 | zhulikas | so I could look it up |
| 06:35.01 | *** join/#debian SubjectOne (~section1@78-20-192-197.access.telenet.be) |
| 06:35.18 | *** join/#debian Zitter (~danilo@host52-231-static.242-95-b.business.telecomitalia.it) |
| 06:35.24 | zhulikas | so now I need to call that service providing my inner ip from pi |
| 06:36.53 | Yitro | Streusel, looks like /var/spool/cron/crontabs/username |
| 06:37.04 | Streusel | yeah |
| 06:37.11 | Streusel | that's where I found it |
| 06:37.28 | *** join/#debian drixter (~drixter@fido.e-utp.net) |
| 06:38.35 | *** join/#debian aggelis6 (~aggelis6@178-149-188.dynamic.cyta.gr) |
| 06:40.25 | *** join/#debian adc (~adc@gateway/tor-sasl/adc) |
| 06:40.37 | *** join/#debian phorce1_home (~gvl2@pdpc/supporter/active/phorce1) |
| 06:41.18 | *** join/#debian bullgard4 (~chatzilla@dslb-088-075-241-185.pools.arcor-ip.net) |
| 06:42.02 | *** join/#debian codygman (~cody@dsl081-114-015.dfw1.dsl.speakeasy.net) |
| 06:43.42 | *** join/#debian `vesrah (~crunchit@ip70-176-67-7.ph.ph.cox.net) |
| 06:44.07 | `vesrah | so i'm trying to install something with dpkg - sudo dpkg -i virtualbox-4.2_4.2.18-88780~Debian~wheezy_amd64.deb --kernelsourcedir=/usr/src/linux-headers-3.10.2/ |
| 06:44.29 | `vesrah | and it says |
| 06:44.30 | `vesrah | Please install the linux-headers-3.10.2 package, |
| 06:44.30 | `vesrah | or use the --kernelsourcedir option to tell DKMS where it's located |
| 06:44.38 | `vesrah | obviously it's not passing my argument |
| 06:44.45 | `vesrah | how do i add arguments with dpkg |
| 06:45.31 | *** join/#debian Ealdor (~Ealdor@247.Red-79-158-160.staticIP.rima-tde.net) |
| 06:46.10 | *** join/#debian aggelis6 (~aggelis6@178-149-188.dynamic.cyta.gr) |
| 06:46.42 | *** join/#debian Sambler (~OKASO@185.Red-81-36-11.dynamicIP.rima-tde.net) |
| 06:46.45 | *** join/#debian Sambler (~OKASO@unaffiliated/sambler) |
| 06:47.15 | rryoumaa | any idea why gtk-redshift does not show any dialog or anything? does it require the existence of a desktop environment? |
| 06:52.27 | *** join/#debian ulmer (~gnulix@dslb-092-075-013-155.pools.arcor-ip.net) |
| 06:52.40 | *** join/#debian dash_ (~d45h@unaffiliated/dash-/x-7576607) |
| 06:56.43 | rryoumaa | how come iceweasel has all sorts of extensions in debian, but chromium has none? |
| 06:57.23 | *** join/#debian rbnielsen (~rbnielsen@2-109-204-209-dynamic.dk.customer.tdc.net) |
| 06:57.49 | *** join/#debian matanya (~matanya@wikimedia/matanya) |
| 06:58.32 | ulmer | hi |
| 06:59.37 | rryoumaa | how do you integrate an integrity checker (integrit, aide, samhain, tripwire, etc.) with the package manager so you don't keep triggering it? |
| 07:00.00 | rryoumaa | will stop asking questions if none of the 3 gets an answer |
| 07:00.01 | *** mode/#debian [+l 1339] by debhelper |
| 07:00.45 | `vesrah | i don't think there are answers here |
| 07:00.47 | `vesrah | just questions |
| 07:00.48 | `vesrah | ;/ |
| 07:02.06 | themill | rryoumaa: gtk-reshift displays in the system tray |
| 07:06.38 | ulmer | how do I remove txt-files the are <1MB in one folder? |
| 07:07.30 | themill | `vesrah: what's uname -r there |
| 07:07.31 | ulmer | I mine a command |
| 07:07.58 | `vesrah | Linux opsek 3.10.2 #1 SMP Mon Jul 22 13:41:06 MST 2013 x86_64 GNU/Linux |
| 07:08.06 | rryoumaa | thanks |
| 07:08.49 | themill | notes that's not uname -r |
| 07:08.51 | *** join/#debian blubberdiblub (~foobar@blubberdiblub.org) |
| 07:08.54 | `vesrah | 3.10.2 |
| 07:09.18 | themill | dkms should already be looking in the right place then |
| 07:09.23 | `vesrah | i have the sources, they are at /usr/src/linux-headers-3.10.2 |
| 07:09.42 | `vesrah | for whatever reason it just doesn't see them and i'm not sure how to pass the build flag through dpkg |
| 07:09.47 | themill | You don't |
| 07:10.11 | *** join/#debian xpd259 (~Icedove@2a01:348:6:81ee:52e5:49ff:fe5a:3e5b) |
| 07:10.19 | themill | The debian kernel packages work with the debian virtualbox packages.... |
| 07:10.20 | *** join/#debian xpd259 (~Icedove@2a01:348:6:81ee:52e5:49ff:fe5a:3e5b) |
| 07:10.26 | `vesrah | @opsek:~/tmp$ ls /usr/src/ | grep 3.10.2 |
| 07:10.28 | `vesrah | linux-headers-3.10.2 |
| 07:11.01 | `vesrah | yes but if i try to do that it won't install because i get |
| 07:11.01 | `vesrah | <PROTECTED> |
| 07:11.20 | themill | No... don't mix packages for sid into your wheezy box |
| 07:11.28 | themill | dpkg: tell `vesrah about bdo |
| 07:11.53 | ulmer | how to remover files in one folder, the are <1MB? |
| 07:12.04 | `vesrah | do i need to comment out the repos in my sources.lst? |
| 07:12.08 | *** join/#debian FilipeMaia (~filipe@h136n4-u-a31.ias.bredband.telia.com) |
| 07:12.20 | themill | `vesrah: "the repos"? |
| 07:12.36 | `vesrah | ulmer: find . -size -1m { while read file do rm $file done; } |
| 07:12.55 | `vesrah | you're saying don't mix packages, how do i prevent that |
| 07:12.58 | themill | itym -delete |
| 07:13.09 | *** join/#debian jetscreamer (~jetscream@unaffiliated/jetscreamer) |
| 07:13.21 | themill | `vesrah: you shouldn't have anything other than "wheezy" "wheezy-updates" "wheezy/updates" "wheezy-backports" in your sources.list |
| 07:13.57 | ulmer | it works with *.txt files? |
| 07:15.40 | themill | ulmer: «find -maxdepth 1 -size -1M -a -name \*txt»; add -delete to have it do something. Make sure it's doing what you want before deleting lots. |
| 07:15.44 | themill | dpkg: tell ulmer about using find |
| 07:16.34 | *** join/#debian sysrqalt1 (~brock@2601:7:1c40:103:5054:ff:fec0:b173) |
| 07:17.24 | `vesrah | i think this will work, ulmer, i had all of the repos for vbox listed there |
| 07:17.59 | `vesrah | nope |
| 07:18.00 | `vesrah | :/ |
| 07:18.08 | `vesrah | same thing about the headers now |
| 07:18.28 | themill | that doesn't tell anyone much |
| 07:20.18 | `vesrah | http://paste.debian.net/36780/ |
| 07:20.35 | *** join/#debian e-mc^2 (~night_rid@gateway/tor-sasl/e-mc2/x-92663163) |
| 07:20.48 | themill | "virtualbox-4.2" isn't a package in debian. |
| 07:21.20 | `vesrah | what is the correct debian package |
| 07:21.21 | *** join/#debian daveX7 (~py@adfb55be.cst.lightpath.net) |
| 07:21.37 | *** join/#debian sysrqalt (~brock@c-67-171-178-125.hsd1.or.comcast.net) |
| 07:21.40 | `vesrah | virtualbox, correct? |
| 07:21.52 | ulmer | thank you `vesrah! |
| 07:23.08 | *** join/#debian Sambler (~OKASO@unaffiliated/sambler) |
| 07:23.26 | *** join/#debian timahvo1 (~rogue@197.237.174.93) |
| 07:24.15 | *** join/#debian kaede|sheepy (~Kaede@99.195.79.89) |
| 07:24.45 | *** join/#debian tryagain (~tryagain@178.216.76.18) |
| 07:25.12 | `vesrah | http://paste.debian.net/36781/ |
| 07:25.15 | `vesrah | you have to be kidding me |
| 07:25.39 | *** join/#debian codygman (~cody@dsl081-114-015.dfw1.dsl.speakeasy.net) |
| 07:26.37 | themill | you've not cleaned up the crap from the oracle packages yet. You also seem to have chosen not to install packages that you will need. |
| 07:27.12 | themill | (or perhaps you have virtualbox-dkms from oracle still?) |
| 07:27.20 | *** join/#debian lord4163 (~lord4163@81-232-61-81-no226.tbcn.telia.com) |
| 07:27.58 | `vesrah | i tried purging virtualbox*, it didn't remove anything |
| 07:28.41 | *** join/#debian BenNZ (~Ben__@226.7.252.27.dyn.cust.vf.net.nz) |
| 07:29.44 | *** join/#debian well_laid_lawn (~Jean-luc@d58-106-18-163.rdl801.qld.optusnet.com.au) |
| 07:30.05 | *** join/#debian AciD` (~gni@jau72-5-78-223-56-21.fbx.proxad.net) |
| 07:30.06 | `vesrah | okay, i think i got it. sudo apt-get purge virtualbox-\* |
| 07:35.38 | *** join/#debian RussellB28 (russell@krypton.rbradford.me) |
| 07:36.00 | *** join/#debian ledestin (~ledestin@119.224.34.17) |
| 07:36.55 | *** join/#debian firecode (~irc@unaffiliated/firecode) |
| 07:39.45 | *** join/#debian Super-noob (~no@83.177.79.23) |
| 07:40.14 | *** join/#debian m8 (~m@unaffiliated/m8) |
| 07:42.58 | *** join/#debian sysrqalt (~brock@2601:7:1c40:103:5054:ff:fec0:b173) |
| 07:44.42 | *** join/#debian kain88 (~kain88@kel30.kel.studentenwerk-goettingen.de) |
| 07:49.01 | *** join/#debian bn` (~Amunet@95-89-138-106-dynip.superkabel.de) |
| 07:49.07 | *** join/#debian bn` (~Amunet@unaffiliated/bn/x-6686386) |
| 07:49.37 | *** join/#debian GentileBen (~RaycisCha@cpc5-lutn10-2-0-cust681.9-3.cable.virginmedia.com) |
| 07:49.46 | *** join/#debian oberling (~oberling@141.45.146.80) |
| 07:49.51 | *** join/#debian lennox (lennox@addaitechnologies.com) |
| 07:50.38 | *** join/#debian DocMAX (DocMAX@g224155064.adsl.alicedsl.de) |
| 07:50.44 | DocMAX | hello |
| 07:50.55 | *** join/#debian ne0sis (~quassel@41-135-71-132.dsl.mweb.co.za) |
| 07:51.03 | DocMAX | i did a fresh debian install |
| 07:51.25 | DocMAX | but how do i setup my DVB-T stick? |
| 07:52.41 | *** join/#debian project2501a (~kot@lopsa/member/project2501a) |
| 07:52.49 | *** join/#debian vladuke__ (~vladuke@178.130.42.7) |
| 07:54.30 | well_laid_lawn | I'm sure there'll be a wiki article about that DocMAX |
| 07:55.12 | well_laid_lawn | DocMAX: https://wiki.debian.org/USB-DVBT%20Stick |
| 07:55.26 | musca | !dvb |
| 07:55.27 | dpkg | Digital Video Broadcasting (DVB) is a suite of standards for digital television (http://en.wikipedia.org/wiki/DVB). Drivers for a large number of DVB devices are included in the Linux kernel, see http://www.linuxtv.org/wiki/ for more information. For USB DVB bridge firmware, ask me about <af9015>, <dib0700>. See also <atsc>, <dvb-apps>, <e506r>, <mantis>, <saa7134>, <saa716x>, <stv22>. #linuxtv on irc.freenode.net. |
| 07:55.37 | *** join/#debian Sambler (~OKASO@unaffiliated/sambler) |
| 07:56.45 | *** join/#debian sysrqalt1 (~brock@c-67-171-178-125.hsd1.or.comcast.net) |
| 07:58.58 | *** join/#debian sysrqalt (~brock@c-67-171-178-125.hsd1.or.comcast.net) |
| 08:00.19 | *** join/#debian DarkKnightCZ (~lukas@ip-4-11.hlucinnet.cz) |
| 08:00.21 | musca | DocMAX: check your dmesg for messages after connecting the device: dmesg | tail -n 20 |
| 08:00.23 | *** join/#debian Cr0iX (~jp@bouncer.mx0.eu) |
| 08:01.04 | musca | DocMAX: you can paste it in http://paste.debian.net |
| 08:02.02 | *** join/#debian MekkaGodzilla (~MekkaGodz@cxr69-3-82-224-150-128.fbx.proxad.net) |
| 08:02.27 | DocMAX | http://paste.debian.net/36790 |
| 08:03.36 | DocMAX | doesn't debian kernel support dvb out of the box?? |
| 08:03.40 | *** join/#debian sysrqalt1 (~brock@c-67-171-178-125.hsd1.or.comcast.net) |
| 08:04.06 | DocMAX | in ubuntu when i connect i see DVB: entrys from kernel |
| 08:04.18 | DocMAX | along with module load |
| 08:04.26 | DocMAX | but not in debian |
| 08:06.47 | jned | I would like to disable all outside access to my computer, so that you can only access via terminal |
| 08:06.48 | *** join/#debian dayangkun_ (~dayangkun@123.118.223.238) |
| 08:06.54 | jned | like via infront of the computer |
| 08:07.08 | DocMAX | maybe i need to recompile kernel with dvb support? |
| 08:07.17 | *** join/#debian tormen__ (~me@no-panic.eu) |
| 08:07.23 | rryoumaa | jned: ifdown? |
| 08:07.40 | themill | DocMAX: Have you compared the kernel versions? Worked out what module is used? |
| 08:07.46 | jned | rryoumaa, I would still like to use internet |
| 08:08.03 | *** join/#debian RA3OR (~demon@46.108.180.9) |
| 08:08.03 | *** join/#debian RA3OR (~demon@unaffiliated/ra3or) |
| 08:08.23 | Deeps | jned: on a simplistic level, iptables -P INPUT DROP; iptables -P FORWARD DROP; iptables -I INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT |
| 08:08.24 | well_laid_lawn | jned: what makes you think someone can access your computer while not in front of it? |
| 08:08.40 | Deeps | jned: well_laid_lawn's question is definitely worth pursuing though. |
| 08:09.04 | jned | Deeps, forget about securing it? |
| 08:09.10 | DocMAX | compare with what? |
| 08:09.18 | *** join/#debian sysrqalt (~brock@c-67-171-178-125.hsd1.or.comcast.net) |
| 08:09.23 | rryoumaa | what types of access are there? |
| 08:09.31 | Deeps | jned: well_laid_lawn's question is along the lines of securing it. i'm just giving you a one line solution that doesn't actually identify the root cause of the problem |
| 08:09.32 | themill | DocMAX: the ubuntu machine you say this works with |
| 08:09.36 | jned | local and remote |
| 08:09.48 | rryoumaa | what types of remote access are there? |
| 08:10.03 | jned | root and user |
| 08:10.10 | themill | jned: they aren't methods of access |
| 08:10.42 | digdilem | ssh, telnet, rdp, vpn and more |
| 08:10.57 | jned | close all the ports? |
| 08:11.04 | Deeps | jned: what methods of remote access do you actually have installed? |
| 08:11.13 | jned | default setup |
| 08:11.19 | Deeps | define 'default setup' |
| 08:11.22 | digdilem | http can be considered remote access if you have scripts serverside that Do Stuff |
| 08:11.25 | Deeps | my default setup is debian minimal |
| 08:11.33 | Deeps | which installs nothing |
| 08:11.38 | jned | debian stable installation |
| 08:11.52 | Deeps | gives up |
| 08:12.42 | DocMAX | themill: it uses em28xx_dvb |
| 08:13.22 | DocMAX | and there are extra entries beginning with DVB: loading modules.. bla bla |
| 08:13.51 | digdilem | jned, your original question: there is no "totally" safe option here, only one of gradients. Start with everything disabled and yourself behind a nat firewall, or a local firewall, and open ports as you requre and when you understand what they do |
| 08:14.00 | DocMAX | has it something to do with udev rules? |
| 08:14.42 | jned | can I just remove sshd? But I still need ssh to my vps |
| 08:14.48 | *** join/#debian futex (~futex@99.ip-37-187-51.eu) |
| 08:15.10 | digdilem | you can disable sshd (rather than remove) and leave ssh usable, yes |
| 08:15.20 | digdilem | (sorry, have to afk now) |
| 08:15.52 | *** join/#debian Brilliant (~brilliant@p57BB5D4B.dip0.t-ipconnect.de) |
| 08:16.39 | DocMAX | themill: in ubuntu looks like this when i connect: http://paste.debian.net/36795/ |
| 08:18.54 | *** join/#debian glebihan_ (~glebihan@unaffiliated/glebihan) |
| 08:19.41 | themill | DocMAX: the debian kernels have that module too. Does "modinfo em28xx|grep ^version" give different output between the two kernels? |
| 08:20.20 | *** join/#debian dreamon (~dreamon@unaffiliated/dreamon) |
| 08:20.24 | Riztonnn | how is it possible to set two different libs with the same name for 2 different users please ? |
| 08:20.46 | *** join/#debian qrz7 (~pku@ppp-93-104-130-188.dynamic.mnet-online.de) |
| 08:21.02 | DocMAX | themill: module not found... |
| 08:21.05 | DocMAX | why? |
| 08:21.18 | DocMAX | isnt it included with V4L ? |
| 08:21.22 | *** join/#debian m3g9tr0n (~magnum@ppp-94-64-194-118.home.otenet.gr) |
| 08:21.27 | DocMAX | i compiled and installed! |
| 08:21.46 | *** join/#debian e1z0 (~null@netlinux/founder/e1z0) |
| 08:21.56 | themill | you compiled and installed what? |
| 08:22.05 | Riztonnn | I mean is there any specific folder for that ? /usr/lib cannot contain 2 files with the same name ? |
| 08:22.28 | themill | Riztonnn: what are you really trying to do? |
| 08:22.40 | DocMAX | themill: V4L drivers |
| 08:22.53 | *** join/#debian ghostlines (~ghost@92.109.90.61) |
| 08:22.56 | Riztonnn | I am developping an app and there is the test environnement and the prod environnement, that's why |
| 08:23.04 | DocMAX | http://linuxtv.org/wiki/index.php/How_to_Obtain,_Build_and_Install_V4L-DVB_Device_Drivers |
| 08:23.09 | Riztonnn | it is 2 different user on my debian server |
| 08:23.28 | DocMAX | themill: shouldn't there be all known drivers? |
| 08:24.07 | themill | DocMAX: the debian kernel already included all you needed. I have no idea what you've compiled or why or what kernel modules you've overwritten or broken in the process. |
| 08:24.33 | *** join/#debian TomasCZ (~TomasCZ@yes.tenlab.net) |
| 08:24.43 | *** join/#debian Roland- (~pro@79.119.105.107) |
| 08:24.54 | themill | Riztonnn: you could set LD_LIBRARY_PATH differently for the two users (or set it to be $HOME/lib/ for both of them even) |
| 08:25.16 | themill | Riztonnn: or of course you could use a chroot or a VM depending on what level of isolation is required |
| 08:25.17 | *** join/#debian nova_ (~nova@catv-80-99-240-71.catv.broadband.hu) |
| 08:25.25 | Some_Person | I've figured out how to access the camera streams manually |
| 08:25.37 | Some_Person | Now I just need a program that can display them nicely |
| 08:26.06 | *** join/#debian bst_ (~bst@net55-0-245-109.mbb.telenor.rs) |
| 08:26.32 | *** join/#debian Havis (~Havis@adsl-dyn-236.95-102-57.t-com.sk) |
| 08:26.40 | well_laid_lawn | try mplayer |
| 08:26.43 | jned | Some_Person, what camera streams? |
| 08:26.43 | Riztonnn | if my libraries are in /home/$user/lib I dont need to change anything in the LD_LIBRARY_PATH ? |
| 08:26.53 | *** join/#debian whtthy (~whtthy@5.199.203.218) |
| 08:27.06 | Riztonnn | I mean $home/lib/ mean /home/$user/lib ? |
| 08:27.06 | Some_Person | My dad wants to be able to access the security cameras from his work at home. Problem is that the web interface for this uses ActiveX |
| 08:27.07 | themill | Riztonnn: well you'd export LD_LIBRARY_PATH=$HOME/lib for both users |
| 08:27.27 | Some_Person | mplayer won't work because it can only show one stream at a time |
| 08:27.48 | Riztonnn | why do you use $home/lib ? isnt it LD_LIBRARY_PATH=~/lib ? |
| 08:27.53 | pirret | use internet explorer? |
| 08:28.05 | Some_Person | pirret: I tried that. It doesn't work very reliably with wine |
| 08:28.14 | pirret | mmh |
| 08:28.17 | Riztonnn | themill> and if I reboot the server, the setting is not lost ? |
| 08:28.46 | Some_Person | I've figured out how to access each stream (just normal http streams), but I need some way to actually display them |
| 08:29.17 | pirret | write a webpage thats shows all streams :) |
| 08:29.27 | themill | Riztonnn: it's an environment variable that setting is only persistent for the life of the process that has it and any processes it creates. You'd need to put that setting in the startup script that starts the test and development instances |
| 08:30.00 | *** mode/#debian [+l 1352] by debhelper |
| 08:31.23 | Riztonnn | themill> and how to set the variable for one user persistent without having to do it each time ? |
| 08:31.53 | Some_Person | Is there a program that can just show a bunch of video streams at once? |
| 08:32.07 | themill | Riztonnn: how do you start this application? |
| 08:33.04 | *** join/#debian scoobertron (~tom@66.172.11.27) |
| 08:33.31 | *** join/#debian sysrqalt1 (~brock@c-67-171-178-125.hsd1.or.comcast.net) |
| 08:33.55 | Riztonnn | themille> my node.js server uses commands that requires the libs, it is the same problem also for the commands, the same command has to be different in both environment |
| 08:34.27 | *** join/#debian Guest54957 (~quassel@li89-226.members.linode.com) |
| 08:34.37 | *** join/#debian xmx (~xmx@antii.info) |
| 08:34.39 | *** join/#debian v2k (~v2k@li603-177.members.linode.com) |
| 08:34.41 | *** join/#debian initself (~initself@li547-249.members.linode.com) |
| 08:34.46 | *** join/#debian gear (~gear@antii.info) |
| 08:35.17 | *** join/#debian billybob1 (~billybob@wulfman.com) |
| 08:35.52 | *** join/#debian blagora (~blagora@host86-190-232-204.wlms-broadband.com) |
| 08:35.56 | *** join/#debian STMelon|afk (znc@ridley.fastlizard4.org) |
| 08:35.56 | *** join/#debian STMelon|afk (znc@pdpc/supporter/active/stmelon) |
| 08:36.09 | *** join/#debian codygman (~cody@dsl081-114-015.dfw1.dsl.speakeasy.net) |
| 08:36.16 | *** join/#debian ghostlines_ (~ghost@92.109.90.61) |
| 08:37.41 | *** join/#debian dgeary2_ (~debian@pa49-187-82-72.pa.nsw.optusnet.com.au) |
| 08:38.21 | *** join/#debian redrs (~redrs@tube0ut.mooo.com) |
| 08:38.27 | *** join/#debian codygman (~cody@dsl081-114-015.dfw1.dsl.speakeasy.net) |
| 08:40.43 | *** join/#debian Silmarilion (~Silmarili@cable-188-2-243-82.dynamic.sbb.rs) |
| 08:43.28 | *** join/#debian sysrqalt (~brock@c-67-171-178-125.hsd1.or.comcast.net) |
| 08:44.03 | *** join/#debian Leryan (~florent@2a01:e35:8a3f:81f0:1a03:73ff:fe61:8f61) |
| 08:45.10 | *** join/#debian Tiffon (~name@unaffiliated/tiff0n) |
| 08:45.31 | Riztonnn | themill> ? |
| 08:46.41 | themill | The one node.js server is starting both the test and the production? |
| 08:48.38 | Riztonnn | ouais my 2 node.js server starts on different port |
| 08:48.46 | *** join/#debian harrison (~quassel@li89-226.members.linode.com) |
| 08:49.33 | Riztonnn | sorry I mean there are 2 differents node js server on two different ports |
| 08:50.05 | *** join/#debian chattr (~regnad_kc@72.239.113.237) |
| 08:53.00 | themill | Ahh, so you should be able to set this environment variable in the script that starts the nodejs server. |
| 08:53.30 | *** join/#debian HisaoNakai (~HisaoNaka@unaffiliated/contrapunctus) |
| 08:53.31 | *** join/#debian _goTAN (~goTAN@HSI-KBW-095-208-250-116.hsi5.kabel-badenwuerttemberg.de) |
| 08:53.31 | themill | Two servers will have two startup scripts (in one way or another) so you can set the different environment variable there |
| 08:58.37 | *** join/#debian Leryan (~florent@2a01:e35:8a3f:81f0:1a03:73ff:fe61:8f61) |
| 08:59.05 | *** join/#debian kimda (~kim@s55979c2d.adsl.online.nl) |
| 08:59.21 | *** join/#debian e1z0 (~null@netlinux/founder/e1z0) |
| 08:59.53 | Riztonnn | what about adding export LD_LIBRARY_PATH=LD_LIBRARY_PATH+/home/lib in the bashrc ? |
| 09:01.10 | *** join/#debian e1z0_ (~null@88.216.5.200) |
| 09:01.40 | *** join/#debian Kenran (~jo@g228010012.adsl.alicedsl.de) |
| 09:02.17 | Kenran | Hey again guys |
| 09:02.27 | *** join/#debian Leoneof (~Leoneof@unaffiliated/leoneof) |
| 09:02.49 | Kenran | don't know if you remember, but I had that "BUG - soft lookup! CPU#1 was stuck for 23s!" bug on startup of Debian |
| 09:03.26 | Kenran | well, it's appearing again. I thought the temporary fix to set NO_HZ=y in /etc/default/grub and then updating grup would do the trick, but apparently it doesn't |
| 09:03.31 | *** join/#debian jskinner (~jskinner@50-80-52-210.client.mchsi.com) |
| 09:03.38 | Kenran | I also have amd64-microcode installed, so that's not it either |
| 09:04.15 | Kenran | do you have any idea what that could be? |
| 09:04.43 | Kenran | I never updated a kernel in Debian yet, but I think if there's no easier fix I have to look for some backported kernel (or what it's called) |
| 09:05.20 | kimda | hi. I am experiencing intermitted network connection issues. Most of the time I can connect really fast via ssh. And sometimes it will take a couple of seconds to get the login prompt. Any ideas what could be causing this? |
| 09:06.32 | *** join/#debian dnai23 (~daniel@HSI-KBW-091-089-154-223.hsi2.kabel-badenwuerttemberg.de) |
| 09:08.37 | musca | !tell Kenran about bdo kernel |
| 09:09.01 | musca | Kenran: it's not hard or difficult :) |
| 09:09.40 | Kenran | musca: arghs, I can't ALT+# any longer to switch channels in irssi oO let me figure out how to find the message xD |
| 09:10.23 | *** join/#debian Buumi (~Jori@dsl-vsabrasgw1-50df29-6.dhcp.inet.fi) |
| 09:11.06 | *** join/#debian bmr (~bmr@88-105-57-141.dynamic.dsl.as9105.com) |
| 09:11.37 | *** join/#debian Screedo (~Screedo@h100n4-ld-c-d1.ias.bredband.telia.com) |
| 09:12.39 | *** join/#debian nova_ (~nova@catv-80-99-240-71.catv.broadband.hu) |
| 09:12.48 | *** join/#debian blubberdiblub (~foobar@blubberdiblub.org) |
| 09:12.54 | *** join/#debian Nexen (~Nexen@AClermont-Ferrand-654-1-379-131.w90-9.abo.wanadoo.fr) |
| 09:13.53 | *** join/#debian Berry6510 (~Berry@5356AEE3.cm-6-7c.dynamic.ziggo.nl) |
| 09:14.52 | *** join/#debian e1z0 (~null@netlinux/founder/e1z0) |
| 09:16.20 | *** join/#debian valgrind (~valgrind@76.Red-83-61-163.dynamicIP.rima-tde.net) |
| 09:16.44 | *** join/#debian AsumFace (~asumface@31-17-37-41-dynip.superkabel.de) |
| 09:17.54 | *** join/#debian zophy (~sy@host-49-142-220-24.midco.net) |
| 09:18.11 | *** join/#debian dooglus (~biufter@rincevent.net) |
| 09:18.11 | *** join/#debian dooglus (~biufter@unaffiliated/dooglus) |
| 09:18.28 | kimda | I think I found the cause of the problem.. http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=681089 |
| 09:18.39 | *** join/#debian valgrind (~valgrind@76.Red-83-61-163.dynamicIP.rima-tde.net) |
| 09:18.42 | *** join/#debian darsie (~darsie@91-119-214-109.dynamic.xdsl-line.inode.at) |
| 09:18.42 | *** join/#debian MaddinXx_ (~racksteri@zux221-153-203.adsl.green.ch) |
| 09:18.53 | zophy | hi everybody |
| 09:20.21 | *** join/#debian FilipeMaia (~filipe@h136n4-u-a31.ias.bredband.telia.com) |
| 09:23.05 | *** join/#debian tvm (~tom@ip-89-102-125-73.net.upcbroadband.cz) |
| 09:23.06 | *** join/#debian sysrqalt1 (~brock@c-67-171-178-125.hsd1.or.comcast.net) |
| 09:23.37 | WilliamDotSI | would it be a good iudea to crossconnect servers by serial |
| 09:23.44 | WilliamDotSI | to use as emergency console when required remotely? |
| 09:23.49 | WilliamDotSI | does that work still at all? |
| 09:26.09 | *** join/#debian tormen__ (~me@no-panic.eu) |
| 09:27.16 | *** join/#debian drhouse123 (~drhouse12@2.134.154.171) |
| 09:28.33 | *** join/#debian e1z0_ (~null@88.216.5.200) |
| 09:29.48 | *** join/#debian Kenran (~jo@g228010012.adsl.alicedsl.de) |
| 09:30.00 | *** mode/#debian [+l 1360] by debhelper |
| 09:30.04 | *** join/#debian ToApolytoXaos (~ToApolyto@46.21.62.128) |
| 09:31.40 | *** join/#debian hio (b2bfb3c4@gateway/web/freenode/ip.178.191.179.196) |
| 09:31.52 | hio | why does debian have such an old kernel? |
| 09:32.40 | *** join/#debian oo_miguel (~miguel@87-207-228-147.dynamic.chello.pl) |
| 09:32.57 | *** join/#debian catsup (~d@64.111.123.163) |
| 09:33.16 | oo_miguel | Hi, is it possible to create a directory where user foo can put files into, but can not read them nor change/remove them anymore? |
| 09:33.36 | *** join/#debian azcodex (~azcodex_@4.Red-79-145-49.dynamicIP.rima-tde.net) |
| 09:34.01 | *** join/#debian b_52globe (~b_52globe@41.248.203.52) |
| 09:34.03 | *** join/#debian Xanthor (~Xanthor@ip-173.net-81-220-233.bruay.rev.numericable.fr) |
| 09:34.36 | *** join/#debian calbasi (~joan@207.7.14.37.dynamic.jazztel.es) |
| 09:35.35 | JyZyXEL | jelly-home: after 20 hours and 9 passes of memtest there were no errors, so now im trying the file copy with a backported kernel :I |
| 09:36.03 | Kenran | musca: wow, that aptitude command to install a backported kernel... just wow :D |
| 09:36.13 | *** join/#debian Sambler (~OKASO@unaffiliated/sambler) |
| 09:37.12 | Kenran | so, after the installation went through, do I have to do anything specific (besides booting into the new kernel I guess)? |
| 09:37.14 | musca | Kenran: and does the newer kernel solve your issue? |
| 09:37.36 | Kenran | Like changing my sources.list, /etc/default/grub and such, or will they all stay the same? |
| 09:37.53 | musca | Kenran: any proprietary driver moduls to compile for the new kernel? |
| 09:38.06 | Kenran | since I just got a warning that some required firmware my be missing and that I'd have to enable contrib and non-free, which I did before |
| 09:38.46 | Kenran | musca: I don't really get what you mean, so I guess "no" :D |
| 09:38.54 | *** join/#debian sysrqalt (~brock@c-67-171-178-125.hsd1.or.comcast.net) |
| 09:39.19 | musca | Kenran: is there an nvidia or fglrx driver installed? |
| 09:39.30 | Kenran | musca: no |
| 09:39.40 | *** join/#debian b2_ (~b2@ip-27-36.powernet.bg) |
| 09:39.47 | Kenran | I have and ATI Mobility Radeon in here, but didn't install any specific drivers myself |
| 09:39.52 | *** join/#debian carif (~mcarifio@cpe-74-78-54-137.maine.res.rr.com) |
| 09:39.57 | Kenran | and = an |
| 09:40.33 | musca | the free xorg radeon driver willt continue to work with the new kernel. |
| 09:41.08 | *** join/#debian harobed (~stephane-@sab57-2-82-236-241-203.fbx.proxad.net) |
| 09:41.11 | Kenran | ah, so this was just a generic warning |
| 09:41.31 | Kenran | okay, I'm gonna reboot (more than once) now, since the problem doesn't occur everytime unfortunately |
| 09:41.36 | musca | some network cards require firmware ... |
| 09:41.49 | Kenran | musca: thanks for the help, brb :) |
| 09:43.01 | musca | hio: debian has a recent 3.10 kernel in wheezy-backports |
| 09:43.29 | musca | !tell hio about bdo kernel |
| 09:44.13 | hio | cool |
| 09:45.38 | *** join/#debian sysrqalt1 (~brock@c-67-171-178-125.hsd1.or.comcast.net) |
| 09:46.55 | *** join/#debian _0bitcount (~bitcount@81.61.208.23.dyn.user.ono.com) |
| 09:47.18 | *** join/#debian bizarro_1 (~bizarro_1@51.Red-88-19-141.staticIP.rima-tde.net) |
| 09:49.19 | *** join/#debian Kenran (~jo@g228010012.adsl.alicedsl.de) |
| 09:49.41 | Kenran | hey again |
| 09:49.48 | Kenran | I just booted in the backported 3.10 kernel |
| 09:50.07 | Brilliant | oo_miguel: do you have a solution? |
| 09:50.07 | Kenran | and it seems like the problem still persists, just now I get one more line: it's basically these three: |
| 09:50.41 | Kenran | INFO: rcu_sched detected stalls on CPUs/tasks: {0} detected by 1, t=5252 jiffies, g=..... |
| 09:50.51 | *** join/#debian Morsicus (~Morsicus@lns-bzn-52-82-65-84-129.adsl.proxad.net) |
| 09:50.57 | oo_miguel | Brilliant: not yet |
| 09:51.04 | Kenran | BUG: soft lookup - CPU#1 stuck for 23s! [migration/1:12] |
| 09:51.14 | Kenran | ACPI: [Package] has zero elements. |
| 09:51.40 | oo_miguel | Brilliant: I thought just about running some cronjob, once in a while and remove the write permission on the files in the directory |
| 09:51.53 | Kenran | can you make anything out of these? I'm pretty helpless right now. I can find some stuff regarding similar issues on the web, but they're mostly way above my level of understanding |
| 09:52.01 | oo_miguel | Brilliant: but this will be bad, if the user is JUST writing a file I suppose... |
| 09:52.49 | *** join/#debian jubei (~jubei@p13007-ipngn100502osakakita.osaka.ocn.ne.jp) |
| 09:52.54 | *** part/#debian jubei (~jubei@p13007-ipngn100502osakakita.osaka.ocn.ne.jp) |
| 09:53.06 | *** join/#debian R430R (~demon@46.108.180.9) |
| 09:53.15 | hio | just run a filewatcher |
| 09:54.28 | musca | Kenran: what kind of hardware is it? And did you update to latest firmware/BIOS? |
| 09:55.35 | Kenran | musca: it's an AMD Athlon II dual core P320 |
| 09:55.57 | Kenran | I don't think I ever updated anything BIOS-related |
| 09:56.19 | Kenran | I'm going to google how that works and then maybe try to do it :) |
| 09:56.40 | *** join/#debian darkskiez (~darkskiez@fsf/member/darkskiez) |
| 09:57.09 | *** join/#debian e1z0 (~null@netlinux/founder/e1z0) |
| 09:58.08 | *** join/#debian whirli (~whirli@a88-113-159-160.elisa-laajakaista.fi) |
| 10:00.36 | *** join/#debian Shirakawasuna (~Shirakawa@184-77-202-94.war.clearwire-wmx.net) |
| 10:05.29 | *** join/#debian Selveste1 (~hds@31.25.23.230) |
| 10:09.44 | *** join/#debian mowgl3y (~cejj@unaffiliated/mowgl3y) |
| 10:10.10 | *** join/#debian Kh05p3r (~Kh05p3r@gw3.tacwap.org) |
| 10:10.14 | mowgl3y | hi guys. where can i get sources.list for testing/jessie? |
| 10:11.50 | *** join/#debian Tom01 (~tom@p5DDFC980.dip0.t-ipconnect.de) |
| 10:13.33 | *** join/#debian g_r_eek (~g_r_eek@ppp-94-69-23-217.home.otenet.gr) |
| 10:13.40 | *** join/#debian f10 (~f10@188-192-183-84-dynip.superkabel.de) |
| 10:16.04 | musca | mowgl3y: From /etc/apt/sources.list, remove stable-specific lines like wheezy-updates and backports, and change "wheezy" to "jessie". don't forget to apt-get update |
| 10:16.12 | *** join/#debian archtimmy (~archtimmy@lk.92.63.16.170.dc.cable.static.lj-kabel.net) |
| 10:16.57 | *** join/#debian diniwed (~gavron@ool-457f587c.dyn.optonline.net) |
| 10:18.05 | *** join/#debian whore (~meh@78-60-186-41.static.zebra.lt) |
| 10:19.23 | mowgl3y | musca: i've done that. and i have also done an update. but i get 404 errors for testing-updates. |
| 10:19.36 | *** join/#debian KiSM (~KiSM@CPE-124-182-178-195.lns6.pie.bigpond.net.au) |
| 10:19.38 | *** join/#debian Voxx (~Voxx@voxx3-adsl.demon.co.uk) |
| 10:19.42 | *** join/#debian f10 (~f10@188-192-183-84-dynip.superkabel.de) |
| 10:20.00 | *** mode/#debian [+l 1369] by debhelper |
| 10:20.15 | mowgl3y | musca: is it supposed to be 'testing-proposed-updates' instead of 'testing-updates'? |
| 10:22.02 | mowgl3y | musca: oh and i put 'testing' instead of 'jessie'. both are the same right? |
| 10:22.22 | *** join/#debian Brigo (~Brigo@233.58.27.77.dynamic.mundo-r.com) |
| 10:22.49 | musca | they are the same until jessie becomes stable |
| 10:23.25 | mowgl3y | right. and i am getting 404 errors for testing-updates links |
| 10:23.38 | *** join/#debian MrHotsauce (~NeedleInY@c-67-173-96-28.hsd1.in.comcast.net) |
| 10:23.58 | mumpitze1 | mowgl3y: do not put in "testing" or "stable" into your sources.list |
| 10:24.06 | mumpitze1 | mowgl3y: of course you are |
| 10:24.24 | mowgl3y | ok should i just put jessie then? |
| 10:24.51 | mowgl3y | or should i put 'testing-proposed-updates'? |
| 10:24.57 | musca | /testing-proposed-updates/ exists, but i doubt it is useful. |
| 10:25.05 | mowgl3y | i see |
| 10:25.15 | babilen | mowgl3y: You have to remove stable specific entries such as wheezy-updates (having that doesn't make sense for testing) -- Are you *sure* that you want to run a development branch of Debian? |
| 10:25.16 | Voxx | Hi - could someone give me a hand at fixing a broken typo3 install? I can't remove or reconfigure it after cancelling giving the install script the mysql pw |
| 10:25.29 | babilen | musca: It is definitely useful |
| 10:25.35 | mumpitze1 | mowgl3y: why do you want to track jessie? |
| 10:25.48 | *** join/#debian dash_ (~d45h@unaffiliated/dash-/x-7576607) |
| 10:25.52 | mowgl3y | ya i can just do that i guess |
| 10:26.00 | *** join/#debian _Paul (~Paul@pD9E1DB04.dip0.t-ipconnect.de) |
| 10:26.33 | *** join/#debian Interruptus (~Interrupt@46-116-4-105.bb.netvision.net.il) |
| 10:26.55 | *** join/#debian iderik (~idk@h-209-5.a197.priv.bahnhof.se) |
| 10:27.22 | *** join/#debian Mac101 (~Mac@host86-177-219-106.range86-177.btcentralplus.com) |
| 10:28.19 | *** join/#debian caf (caf@bitchx/dev/caf) |
| 10:28.26 | Brilliant | oo_miguel: i had tested 702 mode, but it does not work |
| 10:28.27 | *** join/#debian clefebvre (~clem@86.44.62.251) |
| 10:29.11 | mowgl3y | these are the errors i am getting after apt-get update http://paste.debian.net/36832/ |
| 10:29.35 | *** join/#debian pLk (~scooper@xdslas242.osnanet.de) |
| 10:29.43 | Brilliant | oo_miguel: mode 703 is working |
| 10:30.00 | *** join/#debian jubo2 (~jubo2@188-67-237-196.bb.dnainternet.fi) |
| 10:30.01 | *** mode/#debian [+l 1375] by debhelper |
| 10:30.01 | babilen | mowgl3y: Would you like to understand them? |
| 10:30.09 | *** join/#debian ismlages (~ismlages@212.174.109.55) |
| 10:30.10 | mowgl3y | yes please |
| 10:30.23 | babilen | mowgl3y: And you might want to use a different mirror for the time being (http.debian.net is a good metamirror) |
| 10:30.28 | Brilliant | oo_miguel: make the directory as root, then chmod mode 703 to the directory.. then its ok |
| 10:30.29 | *** part/#debian jubo2 (~jubo2@188-67-237-196.bb.dnainternet.fi) |
| 10:30.35 | babilen | mowgl3y: Do you know what wheezy-updates is being used for? |
| 10:30.36 | mowgl3y | http://paste.debian.net/36834/ this is my sources.list |
| 10:30.43 | *** join/#debian jubo2 (~jubo2@188-67-237-196.bb.dnainternet.fi) |
| 10:30.43 | musca | ah, thanks babilen, i read about /testing-proposed-updates/ http://www.debian.org/doc/manuals/developers-reference/pkgs.html#t-p-u |
| 10:30.50 | mowgl3y | stable updates right? |
| 10:31.10 | mowgl3y | packages moved from testing to stable? |
| 10:31.31 | jubo2 | So.. to overtake a normal USB key will accept any sudo user on any machine whatever it is you want to write there |
| 10:31.47 | Brilliant | oo_miguel: drwx----wx 2 root root 4,0K Jun 27 16:39 |
| 10:32.45 | jubo2 | any sudo user will do for a normal USB memory stick whatever the owner of the fs is |
| 10:32.51 | jubo2 | ..? |
| 10:33.45 | *** join/#debian wathek_ (~wathek@183.83.138.58) |
| 10:33.59 | *** join/#debian Rorschachh (~Iori@pa3-84-90-6-65.netvisao.pt) |
| 10:34.26 | babilen | mowgl3y: No, that never happens. Stable is *stable* and doesn't change. There are some packages though for which you need updates to make them useful (think virus scanners, ...) |
| 10:34.30 | babilen | dpkg: tell mowgl3y -about stable |
| 10:34.38 | babilen | dpkg: tell mowgl3y about stable-updates |
| 10:35.21 | mowgl3y | i see |
| 10:35.23 | babilen | mowgl3y: As packages can migrate from unstable to testing already this "extra" route is not needed nor does it make sense, which brings us to testing-proposed-updates |
| 10:35.41 | babilen | dpkg: tell mowgl3y about testing-proposed-updates |
| 10:35.48 | *** join/#debian Sambler (~OKASO@unaffiliated/sambler) |
| 10:35.56 | *** join/#debian r00tN (~r00t@217.218.78.42) |
| 10:36.21 | mowgl3y | babilen: when you do 'tell mowgley *****' nothing happens though |
| 10:36.41 | *** join/#debian pruegeLknabe (~scooper@xdslas242.osnanet.de) |
| 10:37.03 | mowgl3y | babilen: ok my bad. it does. |
| 10:37.04 | *** join/#debian RA3OR (~demon@46.108.180.9) |
| 10:37.04 | *** join/#debian RA3OR (~demon@unaffiliated/ra3or) |
| 10:37.53 | *** join/#debian whirli (~whirli@a88-113-159-160.elisa-laajakaista.fi) |
| 10:38.35 | kimda | Is there a way to disable netqueue feature of the tg3 driver? I have a BCM5719 ethernet port and it becomes unresponsive. |
| 10:38.49 | *** join/#debian marlinc (~marlinc@ip565fa73c.direct-adsl.nl) |
| 10:38.50 | *** join/#debian Amandil (~Amandil@gw3.tacwap.org) |
| 10:40.01 | *** mode/#debian [+l 1381] by debhelper |
| 10:40.01 | *** join/#debian jeffreyio2 (~quassel@ip70-190-254-163.ph.ph.cox.net) |
| 10:40.20 | mowgl3y | babilen: ok i think i got that |
| 10:42.10 | *** join/#debian jeffreyio2_ (~quassel@ip70-190-254-163.ph.ph.cox.net) |
| 10:42.19 | *** join/#debian zappy (~zuppy@xdslgj119.osnanet.de) |
| 10:42.25 | babilen | mowgl3y: I would also recommend to read https://wiki.debian.org/DebianUnstable and take the precautionary measures described therein. Another important tip is: Don't just run upgrades blindly without thinking, but verify that the proposed action(s) is/are what you want. |
| 10:43.44 | mowgl3y | babilen: alright ill do that. once again great help. appreciate it. :) |
| 10:44.29 | *** join/#debian KiSM (~KiSM@CPE-124-182-178-195.lns6.pie.bigpond.net.au) |
| 10:45.24 | *** join/#debian Corerris (~ribe@c83-255-131-198.bredband.comhem.se) |
| 10:45.46 | *** join/#debian jeffreyio2 (~quassel@ip70-190-254-163.ph.ph.cox.net) |
| 10:46.05 | *** join/#debian ragedragon (~ragedrago@78.214.148.27) |
| 10:46.27 | *** join/#debian dFence (~dFence@cpc6-papw6-2-0-cust104.5-3.cable.virginmedia.com) |
| 10:47.02 | dFence | hey guys! where can I find infos on connected cameras (v4l) in /sys? (vendor / product ID would suffice for starters) |
| 10:47.28 | *** join/#debian calvinx (~calvinx@203.117.37.56) |
| 10:50.39 | *** join/#debian _Paul (~Paul@pD9E1DB04.dip0.t-ipconnect.de) |
| 10:51.34 | *** join/#debian whirli (~whirli@91.227.221.114) |
| 10:51.34 | *** join/#debian TLH (~sin@amnezia.2f30.org) |
| 10:53.12 | *** join/#debian hashashin (~hashashin@unaffiliated/hashashin) |
| 10:53.17 | *** join/#debian m8 (~m@unaffiliated/m8) |
| 10:54.17 | *** join/#debian fikst (~fikst@d54C442D5.access.telenet.be) |
| 10:55.12 | *** join/#debian m8 (~m@unaffiliated/m8) |
| 10:58.46 | *** join/#debian sysrqalt (~brock@2601:7:1c00:1fe:5054:ff:fec0:b173) |
| 10:59.03 | *** join/#debian xchg (~xchg@94.229.33.133) |
| 11:00.20 | *** join/#debian juser (~juser@grm-studby-128-39-149-158.studby.uia.no) |
| 11:00.34 | *** join/#debian usr1 (~Thunderbi@grm-studby-128-39-149-158.studby.uia.no) |
| 11:01.13 | *** join/#debian hjubal (~hjubal@unaffiliated/hjubal) |
| 11:01.58 | *** join/#debian jehan (~jehan@kiel4-dmz.gis.de) |
| 11:05.54 | *** join/#debian dpkg (~dpkg@unaffiliated/dpkg) |
| 11:05.54 | *** join/#debian oufo_ (~ET@46.246.188.118.dsl.dyn.forthnet.gr) |
| 11:08.32 | *** join/#debian adc (~adc@gateway/tor-sasl/adc) |
| 11:10.16 | *** join/#debian tormen__ (~me@no-panic.eu) |
| 11:11.47 | Brilliant | oo_miguel: get it? |
| 11:12.07 | *** join/#debian sysrqalt (~brock@2601:7:1c00:1fe:5054:ff:fec0:b173) |
| 11:12.47 | *** join/#debian disposable (disposable@shell.websupport.sk) |
| 11:13.03 | *** join/#debian StephenS (~StephenS@premiumus.xshellz.com) |
| 11:15.47 | *** join/#debian HelenaKitty (~s98259@97e716f0.skybroadband.com) |
| 11:16.53 | *** join/#debian forcefsck (~forcefsck@80.111.109.243) |
| 11:17.05 | *** join/#debian mirak (~mirak@static-176-182-51-103.ncc.abo.bbox.fr) |
| 11:18.02 | *** join/#debian jeffreyio2 (~quassel@ip70-190-254-163.ph.ph.cox.net) |
| 11:19.35 | *** join/#debian ShaneCurran (~shane@89.100.110.32) |
| 11:19.35 | *** join/#debian ShaneCurran (~shane@orchestra/user/TechieShane) |
| 11:19.50 | dreamon | Is there a way to be connected by Lan and Wlan at the same time on same network. Only if one is disconnted the other takes its function. |
| 11:20.43 | blip2 | yes but most network managers won't do it for you |
| 11:21.05 | Deeps | create a bonded interface, active/standby |
| 11:21.13 | dreamon | blip2, which one will do the job? |
| 11:21.40 | blip2 | well actually if you just want failover, nm or wicd do that afaik |
| 11:22.02 | blip2 | or do you want both connected at once? |
| 11:22.27 | dreamon | Deeps, where can I learn it, how to do. "nm" I have.. couldnt found the feature. |
| 11:22.56 | Deeps | dreamon: first hit on google for 'debian bonded interface active/standby' |
| 11:22.59 | Deeps | https://wiki.debian.org/Bonding |
| 11:23.10 | Deeps | that doesn't use nm/wicd though |
| 11:23.19 | Deeps | and might add complication if you do |
| 11:23.44 | dreamon | Deeps, Cool. Thanks! |
| 11:24.55 | *** join/#debian e-anima (~eanima@p5DD8E02F.dip0.t-ipconnect.de) |
| 11:26.22 | *** join/#debian kresp0 (~kresp0@109.Red-79-144-71.dynamicIP.rima-tde.net) |
| 11:27.24 | *** join/#debian waka (~wakariera@unaffiliated/waka) |
| 11:28.10 | *** join/#debian teeteewhy (~teeteewhy@no.ra.pe) |
| 11:28.49 | *** join/#debian Almtesh (~Almtesh@unaffiliated/almtesh) |
| 11:29.01 | Almtesh | Hi everyone. |
| 11:29.41 | Almtesh | I'm looking for the debian package that automaticlly sets the iptable rules on startup. |
| 11:30.24 | Deeps | iptables-persistent maybe? |
| 11:31.33 | Almtesh | Deeps, great, without any wizzard. |
| 11:31.46 | Almtesh | Deeps, exactly what I was looking for. |
| 11:31.53 | *** join/#debian whirli (~whirli@a88-113-159-160.elisa-laajakaista.fi) |
| 11:32.46 | Almtesh | Deeps, it seems to be what I was looking for. |
| 11:33.10 | *** join/#debian goldkatze (~nobody@unaffiliated/goldkatze) |
| 11:33.12 | Almtesh | Deeps, another package exists for that, but it's too complex for my use. |
| 11:33.18 | Almtesh | Deeps, thanks very much. |
| 11:34.08 | *** join/#debian cyberspace- (20253@ninthfloor.org) |
| 11:34.15 | *** join/#debian fedesilva (~fedesilva@r190-135-78-35.dialup.adsl.anteldata.net.uy) |
| 11:34.24 | Brilliant | Almtesh: firestarter maybe |
| 11:34.47 | Almtesh | Brilliant, no gui, sorry. |
| 11:34.54 | *** join/#debian JotaK (~Bihotz@unaffiliated/jotak) |
| 11:35.23 | Brilliant | Almtesh: then you need a script in rc.local |
| 11:35.29 | *** join/#debian mpkossen (~mpkossen@kos.quateria.net) |
| 11:35.35 | *** join/#debian dgeary2_ (~debian@pa49-187-91-221.pa.nsw.optusnet.com.au) |
| 11:35.41 | *** join/#debian up365 (~up365@c-24-0-135-202.hsd1.nj.comcast.net) |
| 11:35.44 | Almtesh | I'm gone. |
| 11:36.22 | *** join/#debian calvinx (~calvinx@103.11.49.53) |
| 11:38.03 | *** join/#debian xpd259 (~Icedove@2a01:348:6:81ee:52e5:49ff:fe5a:3e5b) |
| 11:38.10 | *** join/#debian sysrqalt (~brock@2601:7:1c00:1fe:5054:ff:fec0:b173) |
| 11:39.30 | *** join/#debian Vicissitude (~Vicissitu@pdpc/supporter/active/vicissitude) |
| 11:41.23 | *** join/#debian arare (~Aramur@153.68.117.91.dynamic.mundo-r.com) |
| 11:42.14 | *** join/#debian Axlin (~Axlin@252.142-205-66.ftth.swbr.surewest.net) |
| 11:47.31 | *** join/#debian LordShiva (~shiva@gateway/tor-sasl/lordshiva) |
| 11:48.19 | *** join/#debian grzesag (~grzesag@cpc1-oxfd10-0-0-cust463.4-3.cable.virginmedia.com) |
| 11:48.42 | *** join/#debian ]3n19m4[ (~]3n19m4@95.Red-79-158-106.staticIP.rima-tde.net) |
| 11:49.06 | *** join/#debian asterismo (~asterismo@r186-54-48-137.dialup.adsl.anteldata.net.uy) |
| 11:49.07 | *** join/#debian dreamon (~dreamon@unaffiliated/dreamon) |
| 11:49.50 | JyZyXEL | is kernel-image the new linux-image? |
| 11:50.00 | *** mode/#debian [+l 1387] by debhelper |
| 11:50.11 | *** join/#debian HALEB0B (~HALEB0B@unaffiliated/haleb0b) |
| 11:50.38 | abrotman | JyZyXEL: why would you think that? |
| 11:50.44 | JyZyXEL | oh wait its probably just something that the di uses |
| 11:51.32 | JyZyXEL | abrotman: because i didn't notice the packages.debian.org was suppressing some search results |
| 11:52.10 | oo_miguel | Brilliant: oh just read your message |
| 11:52.12 | oo_miguel | will try it ! |
| 11:52.14 | oo_miguel | thanks Brilliant |
| 11:52.50 | *** join/#debian whirli (~whirli@95.211.137.134) |
| 11:53.08 | oo_miguel | but I have to change the owning group of the directory to foo right? |
| 11:53.54 | *** join/#debian ongolaBoy (~ongolaBoy@unaffiliated/ongolaboy) |
| 11:53.58 | *** join/#debian kriger (~norge@71-90-14-51.dhcp.ftbg.wi.charter.com) |
| 11:55.32 | *** join/#debian deadalnix_ (~deadalnix@i118-21-142-231.s30.a048.ap.plala.or.jp) |
| 11:55.49 | *** join/#debian dgeary2__ (~debian@pa49-187-88-166.pa.nsw.optusnet.com.au) |
| 11:55.56 | JyZyXEL | abrotman: someone was claiming linux 3.11 was gonna be on backports on monday, i was wondering is there some way of confirming that? |
| 11:56.54 | JyZyXEL | i see that 3.11 is currently in the experimental repo, so once it becomes the new sid kernel im thinking it will get backported to wheezy? |
| 11:57.42 | *** join/#debian ubitus (~ubitus@p509208E6.dip0.t-ipconnect.de) |
| 11:58.05 | *** join/#debian Sambler (~OKASO@unaffiliated/sambler) |
| 11:58.26 | *** join/#debian Tuxist (~quassel@p4FEEC1F2.dip0.t-ipconnect.de) |
| 12:01.37 | abrotman | JyZyXEL: no |
| 12:03.23 | *** join/#debian wathek_ (~wathek@183.83.138.58) |
| 12:03.53 | *** join/#debian schreber (~schreber@99-25-238-7.lightspeed.rcsntx.sbcglobal.net) |
| 12:04.00 | dreamon | Deeps, That works perfect. an old dream came true! |
| 12:06.27 | *** join/#debian Fiu2 (~Fiutu@89-68-147-184.dynamic.chello.pl) |
| 12:07.11 | *** join/#debian charl_ (~charl@524AAA7D.cm-4-3c.dynamic.ziggo.nl) |
| 12:08.36 | *** join/#debian RushNY (~Rush.NY@cpe-74-65-68-95.stny.res.rr.com) |
| 12:10.26 | *** join/#debian Droolio (~drool@host217-42-219-64.range217-42.btcentralplus.com) |
| 12:10.35 | *** join/#debian reavengrey (~reavengre@unaffiliated/reavengrey) |
| 12:11.03 | ubitus | Hi guys, quick question: I'm struggeling with the KDE-PIM version of stable and I'm tempted to upgrade to testing on my laptop. I was wondering what the current status of testing is? Is it reasonably stable, considering that the release of stable has been not that long ago? |
| 12:11.58 | abrotman | ubitus: it could be stable today, a mess tomorrow, lots of transitions going on. It's very much dependant on the package set you use |
| 12:12.49 | Brilliant | oo_miguel: in this solution, yes |
| 12:13.00 | ubitus | hmm, unfortunately there's no backport of kde-pim and I'm not skillful enough to make one myself |
| 12:14.40 | abrotman | are you even sure it would fix your problem? |
| 12:15.19 | oo_miguel | Brilliant: with 703 I can not copy a file into the directory :( |
| 12:15.41 | *** join/#debian rgr (~user@g224129178.adsl.alicedsl.de) |
| 12:15.43 | *** join/#debian HazardX (~HazardX3@pool-96-237-60-237.bstnma.fios.verizon.net) |
| 12:15.58 | Brilliant | oo_miguel: i have test it with drag and drop |
| 12:16.04 | oo_miguel | wait sorry |
| 12:16.15 | ubitus | it would give me support for Kolab2 in Kontact, etc. |
| 12:16.25 | Brilliant | oo_miguel: you can drop it, its in there but no access to directory |
| 12:16.45 | oo_miguel | Brilliant: yes you are right! |
| 12:16.51 | oo_miguel | I can copy files, but can not list them |
| 12:17.00 | oo_miguel | however I can remove the file, when I know its naem.. |
| 12:17.02 | oo_miguel | name |
| 12:17.57 | Brilliant | oo_miguel: i dont know if its enough for you? |
| 12:18.08 | oo_miguel | I think thats ok for a start, thank you very much |
| 12:18.15 | *** join/#debian teeteewhy (~teeteewhy@no.ra.pe) |
| 12:19.15 | Brilliant | oo_miguel: if you dont want that other can delete files, then you need to change permissions to the files |
| 12:19.31 | oo_miguel | yes, makes sense.. |
| 12:19.48 | oo_miguel | So I can run some cronjob to change them after a while |
| 12:19.49 | Brilliant | but let me try |
| 12:19.50 | *** join/#debian crus (~crusader@2001:0:4137:9e76:3ca4:292e:c458:154d) |
| 12:20.03 | themill | ubitus: kdepim in jessie doesn't sound like much fun judging by the bugs its accummulating |
| 12:20.55 | themill | ubitus: kdepim2 sounds like it's a long way from being a piece of working software |
| 12:21.10 | Brilliant | oo_miguel: there is maybe a better solution, but i dont know, what your project is.. |
| 12:21.53 | oo_miguel | I am fine with this one for a start, thax a lot! |
| 12:22.02 | ubitus | hmm that is a problem then... |
| 12:22.17 | ubitus | have to admit that I didn't give the state of kdepim much thought |
| 12:23.20 | *** join/#debian azcodex (~azcodex_@4.Red-79-145-49.dynamicIP.rima-tde.net) |
| 12:23.31 | themill | ubitus: the great kdepim rewriteâ„¢ has been going for a few years now and it's still a long way from complete. Some people are certainly using it on a daily basis now, but I don't intend to touch it for as long as possible |
| 12:24.09 | Brilliant | oo_miguel: take a look to umask, maybe that is a better solution |
| 12:24.16 | *** join/#debian m4ggus (marcus@unaffiliated/m4ggus) |
| 12:24.24 | oo_miguel | hmmm |
| 12:24.28 | oo_miguel | okt hanks |
| 12:25.18 | *** join/#debian crus` (~crusader@2001:44b8:319e:2900:fc12:c999:946d:524b) |
| 12:26.08 | *** join/#debian freeayu (~freeayu2@120.42.195.13) |
| 12:26.22 | *** join/#debian hashashin (~hashashin@unaffiliated/hashashin) |
| 12:28.42 | *** join/#debian lasers (~lasers@unaffiliated/lasers) |
| 12:30.00 | *** mode/#debian [+l 1393] by debhelper |
| 12:30.20 | *** join/#debian Malsasa (~quassel@114.79.60.18) |
| 12:32.09 | *** join/#debian mrrcp (~cp@23.29.120.218) |
| 12:32.46 | *** join/#debian tuxIO (~tuxIO@95.210.192.3) |
| 12:35.34 | *** join/#debian HisaoNakai (~HisaoNaka@14.98.172.38) |
| 12:35.34 | *** join/#debian HisaoNakai (~HisaoNaka@unaffiliated/contrapunctus) |
| 12:36.44 | *** join/#debian jasonwert (~w3rt@96-42-150-164.dhcp.trcy.mi.charter.com) |
| 12:39.23 | *** join/#debian LordShiva (~shiva@gateway/tor-sasl/lordshiva) |
| 12:40.27 | *** join/#debian aracon (~quassel@gateway/tor-sasl/aracon) |
| 12:43.26 | *** join/#debian Buumi (~Jori@dsl-vsabrasgw1-50df29-6.dhcp.inet.fi) |
| 12:46.35 | *** join/#debian dvs (~colin@cwv.teksavvy.com) |
| 12:48.20 | *** join/#debian \\Mr_C\\ (mrc@68-186-204-95.dhcp.leds.al.charter.com) |
| 12:50.01 | *** mode/#debian [+l 1401] by debhelper |
| 13:00.00 | *** join/#debian e1z0_ (~null@88.216.5.200) |
| 13:00.36 | *** join/#debian f10 (~f10@softbank126116113037.bbtec.net) |
| 13:00.37 | *** join/#debian pl0nktr (~plonk@212.255.43.239) |
| 13:00.51 | *** part/#debian pl0nktr (~plonk@212.255.43.239) |
| 13:01.22 | *** join/#debian StephenS (~StephenS@xshellz/founder/StephenS) |
| 13:04.01 | kimda | I have a ProLiant DL380p Gen8 server with Debian Squeeze installed onto it. What I am experiencing is intermittend networking failure (not accessible) or a lag when trying to log in remotely via ssh and at other times it is responding the way it should (fast and responsive). The driver is a tg3 (squeeze backports - firmware-linux-nonfree). Any ideas how I can resolve these issues? |
| 13:04.38 | OpenTokix | kimda: do you see anything in dmesg or syslog? |
| 13:04.43 | *** join/#debian josaf_ (josaf_@cpe-67-255-118-162.stny.res.rr.com) |
| 13:04.59 | abrotman | kimda: eh, why are you using squeze? |
| 13:05.06 | abrotman | squeeze even |
| 13:05.17 | kimda | OpenTokix, no I do not see any indications in dmesg or syslog. I even had a HP representative check the hardware and everything is fine accorindg to them. |
| 13:05.23 | abrotman | kimda: are you also using the backports kernel? |
| 13:05.31 | kimda | abrotman, yes backport kernel |
| 13:05.43 | abrotman | Aren't Gen8 only two years old? |
| 13:06.08 | kimda | abrotman, I have to use squeeze because of a certain piece of software |
| 13:06.20 | *** join/#debian michaelni_ (~michael@178-191-70-41.adsl.highway.telekom.at) |
| 13:06.20 | abrotman | ew |
| 13:06.25 | kimda | abrotman, fairly new I think |
| 13:06.34 | kimda | abrotman, yeah I know |
| 13:06.56 | musca | and hp supports only squeeze until now. |
| 13:06.58 | abrotman | kimda: is it only this one server? |
| 13:07.04 | kimda | yes |
| 13:07.13 | abrotman | musca: that's nice, but G8 systtems are fairly new, and squeeze isn't |
| 13:07.16 | *** join/#debian f10 (~f10@p2211-ipbfp2102osakakita.osaka.ocn.ne.jp) |
| 13:07.37 | abrotman | kimda: is it handy that you could try to add a second (firmwareless?) NIC ? |
| 13:07.37 | jelly-home | <PROTECTED> |
| 13:07.55 | kimda | abrotman, I installed the squeeze backport and tg3 driver |
| 13:08.25 | abrotman | kimda: i know, but those bits are still older, wheezy's kernel is from 12 months ago or so |
| 13:08.40 | *** join/#debian badiane_ka (~gdurand@cpe-72-229-36-216.nyc.res.rr.com) |
| 13:08.47 | kimda | abrotman, yes this could be an option unfortunately its a 1,5 hour drive from here so that will be my second option |
| 13:08.52 | abrotman | ah okay |
| 13:08.57 | abrotman | "not handy" |
| 13:09.13 | *** join/#debian e1z0 (~null@netlinux/founder/e1z0) |
| 13:09.19 | kimda | yeah not easy to add a card in there. so i am looking for other options |
| 13:09.44 | kimda | maybe someone here is familiar with these issues |
| 13:10.01 | abrotman | kimda: do you do anything to resolve it? or it fixes itself? |
| 13:10.16 | kimda | abrotman, it fixes itself |
| 13:10.28 | kimda | after a while i can ssh to it fast again. |
| 13:10.52 | *** join/#debian Leoneof (~Leoneof@unaffiliated/leoneof) |
| 13:10.52 | kimda | but sometimes it takes a couple of seconds to get the login prompt |
| 13:11.18 | kimda | what i found is this link: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2035701 |
| 13:11.42 | kimda | unfortunately i am not running it on vmware. its bare metal machine. |
| 13:12.03 | kimda | but maybe there is a way to pass these parameters to the driver to get the same result |
| 13:12.38 | *** join/#debian gm152 (~ridout@unaffiliated/ridout) |
| 13:12.55 | *** join/#debian kain88 (~kain88@kel30.kel.studentenwerk-goettingen.de) |
| 13:14.25 | *** join/#debian guampa (~guampa@gateway/tor-sasl/guampa) |
| 13:18.37 | *** join/#debian jehan (~jehan@kiel4-dmz.gis.de) |
| 13:21.09 | *** join/#debian unixninja92 (~unixninja@c-46-162-92-126.cust.bredband2.com) |
| 13:21.17 | *** join/#debian DocMAX2 (DocMAX@g224242125.adsl.alicedsl.de) |
| 13:21.23 | *** join/#debian Moonk__ (~textual@182.55.91.34) |
| 13:21.47 | kimda | abrotman, would another option be to compile the latest broadcom driver against the backport kernel (and headers) and testing if this fixes these issues? |
| 13:23.43 | *** join/#debian MaddinXx (~racksteri@zux221-153-203.adsl.green.ch) |
| 13:24.15 | *** join/#debian phuzion_ (~phuzion@ipv6.irc.teh-server.com) |
| 13:25.44 | *** join/#debian HisaoNakai (~HisaoNaka@unaffiliated/contrapunctus) |
| 13:26.01 | *** join/#debian OpenToki1 (peter@plab.emediate.eu) |
| 13:26.30 | *** join/#debian koollman (samson_t@sp1.kooll.info) |
| 13:26.42 | *** join/#debian DLange (~DLange@about/linux/staff/dlange) |
| 13:26.43 | *** join/#debian lotherk (~lotherk@office.corpex-net.de) |
| 13:26.44 | *** join/#debian micols (~t@shell1.rlogin.dk) |
| 13:26.54 | *** join/#debian liori (~liori@slarti.exroot.org) |
| 13:27.13 | *** join/#debian kdox- (Elite6019@gateway/shell/elitebnc/x-xwbowbcjgntxwtfc) |
| 13:27.17 | *** join/#debian pythonsnake (~pythonsna@fedora/pythonsnake) |
| 13:27.20 | *** join/#debian z0lty (~zolty@niezle.info) |
| 13:27.29 | *** join/#debian Dad` (~Dad@unaffiliated/dad/x-6432127) |
| 13:27.29 | *** join/#debian DelphicOkami (~lukosanth@pixie.lukos.co) |
| 13:27.33 | *** join/#debian LordDeath (~LordDeath@cable-81-173-165-96.netcologne.de) |
| 13:28.07 | *** join/#debian ArchDuke (~ArchDuke@unaffiliated/archduker) |
| 13:28.10 | *** join/#debian grobda24 (~djbarney@silentflame/member/grobda24) |
| 13:28.21 | *** join/#debian bharrison (~bharrison@mta.backbone-tech.com) |
| 13:28.22 | *** join/#debian Bish (~Bish@78.46.37.79) |
| 13:28.27 | *** join/#debian PaulePanter (~paul@mail.gw90.de) |
| 13:28.59 | *** join/#debian Fli-c (~c@119.97.188.90.etth.tomsknet.ru) |
| 13:29.12 | *** join/#debian optraz (~cyzie@115.132.69.4) |
| 13:29.57 | *** join/#debian Kh05p3r (~Kh05p3r@gw3.tacwap.org) |
| 13:30.00 | *** mode/#debian [+l 1394] by debhelper |
| 13:30.16 | *** join/#debian safejav (~safejav@190.188.180.54) |
| 13:31.49 | *** join/#debian SKyrter (~SKyrter@117-191.198-178.cust.bluewin.ch) |
| 13:32.16 | *** join/#debian asakura0 (~asakura@gateway/tor-sasl/asakura) |
| 13:32.37 | *** join/#debian vrkalak (~vrkalak@108.103.118.22) |
| 13:35.14 | *** join/#debian soul (~quassel@82.198.113.42) |
| 13:36.26 | *** join/#debian bakaneko (~bakaneko_@kuzh.polytechnique.fr) |
| 13:36.57 | abrotman | kimda: sure, or maybe just trying newer firmware |
| 13:37.08 | *** join/#debian dgeary2_ (~debian@pa49-187-88-50.pa.nsw.optusnet.com.au) |
| 13:37.26 | kimda | abrotman, what do you mean...like installing the non-free drivers from testing? |
| 13:37.41 | *** join/#debian lord4163 (~lord4163@81-232-61-81-no226.tbcn.telia.com) |
| 13:38.28 | abrotman | just the firmware, ISTR tg3 is in the kernel, just the firmware is in non-free |
| 13:39.14 | *** join/#debian rgr (~user@g224129178.adsl.alicedsl.de) |
| 13:39.22 | *** join/#debian yano (yano@freenode/staff/yano) |
| 13:39.44 | kimda | abrotman, I already have the non-free backport firmware installed from squeeze backports |
| 13:40.17 | *** join/#debian Henesy (~Henesy@adsl-75-23-117-168.dsl.peoril.sbcglobal.net) |
| 13:42.50 | *** join/#debian project2501b (~kot@109.171.130.210) |
| 13:43.15 | *** join/#debian DarkKnightCZ (~lukas@ip-4-11.hlucinnet.cz) |
| 13:43.41 | *** join/#debian DarkCow (~DarkCow@cpc22-acto3-2-0-cust128.4-2.cable.virginmedia.com) |
| 13:44.27 | *** join/#debian nabblet (~benedict@unaffiliated/benkinooby) |
| 13:45.12 | themill | istr tg3 only needs firmware for some fancy TSO stuff that noone uses. |
| 13:45.35 | *** join/#debian Silmarilion (~Silmarili@cable-188-2-243-82.dynamic.sbb.rs) |
| 13:46.09 | *** join/#debian p0g0 (~pogo@206.28.50.242) |
| 13:46.10 | *** join/#debian p0g0 (~pogo@unaffiliated/p0g0) |
| 13:46.41 | kimda | themill, how do i load the other firmware? |
| 13:49.46 | *** join/#debian bariumbitmap (~nbeaver@108-241-79-18.lightspeed.cicril.sbcglobal.net) |
| 13:50.49 | *** join/#debian flux242 (~chatzilla@82.113.121.95) |
| 13:50.51 | *** join/#debian wildc4rd (~nick@82.153.98.100) |
| 13:51.14 | *** join/#debian freeayu__ (~freeayu2@110.81.58.2) |
| 13:52.45 | mumpitze1 | kimda: the easiest way is to install the (non-free) firmware package and reboot |
| 13:52.52 | *** join/#debian galex-713 (~galex-713@71.45.142.88.rev.sfr.net) |
| 13:52.59 | mumpitze1 | kimda: the kernel will load the firmware automatically if it's installed |
| 13:53.32 | kimda | mumpitze1, I have installed the non-free firmware already. And when I do a lsmod I see the driver tg3 |
| 13:54.21 | *** join/#debian pbn (pbn@k-lined.info) |
| 13:54.23 | kimda | this driver is causing all the problems unfortunately |
| 13:54.48 | *** join/#debian pbn (pbn@k-lined.info) |
| 13:55.13 | *** join/#debian e1z0_ (~null@88.216.5.200) |
| 13:55.45 | *** join/#debian gusnan (~gusnan@81-230-126-193-no160.bredband.skanova.com) |
| 13:55.50 | *** join/#debian zappy (~zuppy@xdslgj119.osnanet.de) |
| 13:57.11 | *** part/#debian koroshiya (~koroshiya@94.102.51.133) |
| 13:57.58 | *** join/#debian hele (~hele@212-149-213-33.bb.dnainternet.fi) |
| 13:58.46 | *** join/#debian Moonk__ (~textual@182.55.91.34) |
| 13:59.24 | *** join/#debian nosuid (~nosuid@unaffiliated/nosuid) |
| 14:00.00 | *** join/#debian raSter^ (raster@gateway/shell/elitebnc/x-tulruvavdvsbhpsq) |
| 14:01.11 | kimda | mumpitze1, abrotman, themill if i would remove the non free driver would I still have a working functioning nic after reboot ? |
| 14:01.52 | *** join/#debian e1z0 (~null@88.216.5.200) |
| 14:01.52 | *** join/#debian e1z0 (~null@netlinux/founder/e1z0) |
| 14:02.27 | *** join/#debian b_52globe (~b_52globe@41.249.131.120) |
| 14:02.51 | mumpitze1 | kimda: the driver is not "non-free". what exact ethernet card do you have (pci id) |
| 14:02.55 | *** join/#debian badass (~badass@unaffiliated/badass) |
| 14:03.22 | kimda | Broadcom Corporation NetXtreme BCM5719 Gigabit Ethernet PCIe (rev 01) |
| 14:03.59 | dvs | not a pci id |
| 14:04.08 | kimda | 03:00.0 |
| 14:04.14 | dvs | not a pci id |
| 14:04.30 | dvs | [xxxx:yyyy] |
| 14:04.34 | *** join/#debian _william_ (~will@this.reverse.dns.is.as.hot.as.william.si) |
| 14:04.41 | kimda | dvs, how do i find this id? |
| 14:04.51 | *** join/#debian adam8157 (~adam@unaffiliated/adam8157) |
| 14:04.55 | dvs | lspci -n |
| 14:05.18 | *** join/#debian e1z0__ (~null@88.216.5.200) |
| 14:05.25 | *** join/#debian _william_ (~will@this.reverse.dns.is.as.hot.as.william.si) |
| 14:05.36 | kimda | 03:00.0 0200: 14e4:1657 (rev 01) |
| 14:05.38 | *** join/#debian blawiz (~DD@unaffiliated/blawiz) |
| 14:05.49 | blawiz | gksudo not in stable rep? |
| 14:05.53 | dvs | ,pciid 14e4:1657 |
| 14:05.54 | judd | [14e4:1657] is 'NetXtreme BCM5719 Gigabit Ethernet PCIe' from 'Broadcom Corporation' with kernel module 'tg3' in wheezy. See also http://kmuto.jp/debian/hcl/index.rhtmlx?check=1&lspci=14e4:1657 |
| 14:06.11 | *** join/#debian harrison (~quassel@74.207.247.226) |
| 14:06.58 | *** join/#debian ZetaNeta (~LoCoZeNoz@unaffiliated/zetaneta) |
| 14:07.39 | *** join/#debian w|t (~ok@unaffiliated/wt/x-8228070) |
| 14:07.51 | *** join/#debian p0g0 (~pogo@206.28.50.242) |
| 14:07.52 | *** join/#debian p0g0 (~pogo@unaffiliated/p0g0) |
| 14:08.06 | _william_ | any way to check/fill ram from the normal OS without reboot? |
| 14:08.17 | _william_ | i changed some rack sticks but cant run memtest86, no HDMI adapter for the screen |
| 14:08.19 | _william_ | :( |
| 14:08.22 | *** join/#debian w|t (~ok@unaffiliated/wt/x-8228070) |
| 14:08.23 | _william_ | *ram |
| 14:08.39 | zykotick9 | blawiz: as a guess, try installing gksu |
| 14:08.54 | *** join/#debian w|t (~ok@unaffiliated/wt/x-8228070) |
| 14:09.09 | *** join/#debian azerus (~badass@unaffiliated/badass) |
| 14:09.56 | *** join/#debian Modeuse (~Modeuse@p5797FB72.dip0.t-ipconnect.de) |
| 14:10.01 | *** mode/#debian [+l 1408] by debhelper |
| 14:10.15 | *** join/#debian PhoenixSTF (~rudi@78.29.129.234) |
| 14:10.20 | *** join/#debian FilipeMaia (~filipe@h136n4-u-a31.ias.bredband.telia.com) |
| 14:11.25 | blawiz | zykotick9, that was it :) ty |
| 14:11.50 | blawiz | is there a way to search the rep more throughotly? |
| 14:12.29 | *** part/#debian DarkKnightCZ (~lukas@ip-4-11.hlucinnet.cz) |
| 14:13.57 | *** join/#debian pbn (pbn@wopr.geekshells.org) |
| 14:16.23 | *** join/#debian phrozen77 (~phrozen77@individualwebhosting.com) |
| 14:17.53 | *** join/#debian deadalnix__ (~deadalnix@i118-21-142-231.s30.a048.ap.plala.or.jp) |
| 14:18.18 | *** join/#debian Moonk__ (~textual@182.55.91.34) |
| 14:19.01 | *** join/#debian Seryth (~Matrix@unaffiliated/mang0) |
| 14:19.22 | *** join/#debian p0g0 (~pogo@unaffiliated/p0g0) |
| 14:20.24 | *** join/#debian badass (~badass@unaffiliated/badass) |
| 14:20.56 | *** join/#debian e1z0 (~null@netlinux/founder/e1z0) |
| 14:22.18 | *** join/#debian e1z0_ (~null@88.216.5.200) |
| 14:22.33 | *** join/#debian chaiz (~chaiz@ppp-124-121-55-184.revip2.asianet.co.th) |
| 14:23.06 | *** join/#debian Steeler (~steeler@dynamic-adsl-94-34-52-204.clienti.tiscali.it) |
| 14:23.22 | *** join/#debian lduros (~user@fsf/member/lduros) |
| 14:23.31 | *** join/#debian fraktor (~walt-crun@174-19-92-120.omah.qwest.net) |
| 14:24.42 | *** join/#debian e1z0__ (~null@88.216.5.200) |
| 14:26.26 | *** join/#debian guampa (~guampa@gateway/tor-sasl/guampa) |
| 14:28.09 | *** join/#debian mavzuna (~mavzuna@unaffiliated/mavzuna) |
| 14:28.42 | *** join/#debian virusuy (~virusuy@r186-54-255-6.dialup.adsl.anteldata.net.uy) |
| 14:28.42 | *** join/#debian virusuy (~virusuy@unaffiliated/virusuy) |
| 14:28.56 | *** join/#debian zir0faive (~zir0faive@cty37-1-78-214-92-19.fbx.proxad.net) |
| 14:29.45 | *** join/#debian harrison (~quassel@li89-226.members.linode.com) |
| 14:31.43 | *** join/#debian e1z0 (~null@88.216.5.200) |
| 14:31.45 | *** join/#debian e1z0 (~null@netlinux/founder/e1z0) |
| 14:33.00 | *** join/#debian ankso (~conf@unaffiliated/r1nu-) |
| 14:36.28 | *** join/#debian badass (~badass@unaffiliated/badass) |
| 14:36.32 | *** join/#debian tvm (~tom@ip-89-102-125-73.net.upcbroadband.cz) |
| 14:37.29 | *** join/#debian McMAGIC--Copy (~McMAGIC--@gateway/tor-sasl/mcmagic--copy) |
| 14:37.36 | *** join/#debian p0g0 (~pogo@unaffiliated/p0g0) |
| 14:37.38 | kimda | i installed the non-free drivers but how can I get to load them? will these non free drivers load automatically on reboot? |
| 14:38.16 | tvm | kimda: depends, modprobe might be necessary, if they're firmware 'microcodes' they load automatically |
| 14:38.26 | tvm | kimda: check your dmesg output to see what's happening |
| 14:38.35 | *** join/#debian e1z0_ (~null@88.216.5.200) |
| 14:39.44 | kimda | tvm, because i already rebooted once with these non free drivers byt they did not load automatically |
| 14:41.00 | tvm | kimda: depends, are they just 'firmware' that gets sourced by other drivers/modules ? |
| 14:41.21 | tvm | kimda: paste your dmesg somewhere and point out what driver are we talking about |
| 14:42.42 | *** join/#debian azerus (~badass@unaffiliated/badass) |
| 14:42.58 | kimda | tvm, Ethernet controller: Broadcom Corporation NetXtreme BCM5719 Gigabit Ethernet PCIe (rev 01) this is the card and it is running now on the tg gpl driver |
| 14:43.33 | tvm | kimda: is the device working ? |
| 14:44.00 | kimda | yes its working but there are networking issues with it. |
| 14:44.24 | *** join/#debian dFence (~dFence@cpc6-papw6-2-0-cust104.5-3.cable.virginmedia.com) |
| 14:44.56 | tvm | well, it's all up to the closed source driver, that you've installed |
| 14:46.31 | *** join/#debian Okee (~123@50-0-108-248.dsl.dynamic.sonic.net) |
| 14:47.38 | *** join/#debian HelenaKitty (~s98259@97e716f0.skybroadband.com) |
| 14:47.55 | Okee | Is there a way to find out what is available in the total debian repository? I would like to find a calendar program that is already in the packaging manager. I am running mint-debian, and it came with Orage by default, but Orage only shows you one day at a time. Supposedly Mozilla has Lightning, which is a predecessor of Sunbird, but I am not sure how to install either one of them. |
| 14:48.11 | *** join/#debian Havis (~Havis@adsl-dyn-236.95-102-57.t-com.sk) |
| 14:48.44 | *** join/#debian cappicrd (~cappicard@78.18.43.126) |
| 14:48.56 | *** join/#debian m3g9tr0n (~magnum@ppp-94-64-194-118.home.otenet.gr) |
| 14:49.25 | tvm | Okee: generally, you search the repository with apt-search foo |
| 14:49.52 | tvm | Okee: foo being, the name of package or part of the description |
| 14:50.01 | *** join/#debian RougeR (~RougeR@5.42.129.198) |
| 14:50.01 | *** join/#debian RougeR (~RougeR@unaffiliated/rouger) |
| 14:50.02 | *** join/#debian no_gravity (~user@p5482D185.dip0.t-ipconnect.de) |
| 14:50.20 | *** join/#debian e1z0 (~null@netlinux/founder/e1z0) |
| 14:50.25 | tvm | Okee: that would be the standard way to solve this without a graphical frontend |
| 14:50.30 | no_gravity | Is there a reason, that Debian tells me every few minutes that my battery is 19%, 17%, 18%... etc etc? |
| 14:50.30 | *** join/#debian m3g9tr0n_ (~magnum@ppp-94-64-194-118.home.otenet.gr) |
| 14:50.39 | *** join/#debian john_rambo (~tux@unaffiliated/john-rambo/x-5460353) |
| 14:50.55 | Okee | Is there a way to find a list of descriptions? I am just not that creative or intuitive. |
| 14:51.10 | *** join/#debian m3g9tr0n_ (~magnum@ppp-94-64-194-118.home.otenet.gr) |
| 14:51.27 | Okee | The Mozilla Lighting program I was mentioning is located here -->http://www.mylinuxsoftware.com/linux_calendar_software.html |
| 14:52.12 | tvm | Okee: i don't know nor use that package |
| 14:52.23 | tvm | Okee: but just try apt-cache search calendar and you'll see yourself |
| 14:53.28 | john_rambo | I am running squeeze. This is my sources.list >>>> http://paste.debian.net/36928/ ...............I am getting 404 Not Found in case of the backports |
| 14:53.49 | *** join/#debian bakaneko (~bakaneko_@kuzh.polytechnique.fr) |
| 14:54.57 | Okee | thanks. That did the trick. |
| 14:54.59 | tvm | john_rambo: correct, the URL is invalid |
| 14:58.19 | john_rambo | tvm, I just changed it to deb http://backports.debian.org/debian-backports/ squeeze-backports(-sloppy) main ............as written here >>>>http://backports.debian.org/ ...........but stil the 404 error |
| 14:58.40 | *** join/#debian e1z0 (~null@88.216.5.200) |
| 14:58.41 | *** join/#debian e1z0 (~null@netlinux/founder/e1z0) |
| 14:59.03 | *** join/#debian ScottG (~scott@198.46.142.213) |
| 14:59.37 | *** join/#debian Rosco2 (~RossGammo@188-178-212-240-dynamic.dk.customer.tdc.net) |
| 14:59.58 | *** join/#debian e1z0_ (~null@88.216.5.200) |
| 15:00.00 | tvm | john_rambo: paste your sources.list once again, |
| 15:00.05 | tvm | there will be some error |
| 15:00.06 | *** join/#debian whirli (~whirli@a88-113-159-160.elisa-laajakaista.fi) |
| 15:01.00 | john_rambo | tvm, http://paste.debian.net/36929/ |
| 15:04.32 | tvm | john_rambo: hmm, what's the exact error ? |
| 15:05.33 | john_rambo | tvm, http://paste.debian.net/36931/ |
| 15:05.42 | *** join/#debian dj13692 (~androirc@f-paris.org) |
| 15:06.50 | *** join/#debian e1z0 (~null@88.216.5.200) |
| 15:06.50 | *** join/#debian e1z0 (~null@netlinux/founder/e1z0) |
| 15:06.51 | ScottG | I just installed ntpd and it's running but my time still seems a little off. How do i force a sync? |
| 15:08.28 | *** join/#debian Soru (~quassel@82.198.113.42) |
| 15:09.47 | kimda | I give up. Tried to install new firmware but it gives me an error message while compiling. I am going to buy a new card and put it in the server. Hopefully this time one with a driver that works properly. Thank you guys for helping me. |
| 15:10.01 | *** mode/#debian [+l 1402] by debhelper |
| 15:10.08 | tvm | john_rambo: sorry, i don't know what is wrong :| |
| 15:10.33 | *** join/#debian giuscri (~giuscri@host69-17-dynamic.21-79-r.retail.telecomitalia.it) |
| 15:10.34 | tvm | kimda: double check beforhand if the given model is properly supported by the Linux kernel |
| 15:10.51 | *** join/#debian r0tha (~r0tha@76-218-126-126.lightspeed.sntcca.sbcglobal.net) |
| 15:10.56 | kimda | tvm, yes i will do a thorough search for it. |
| 15:11.12 | kimda | tvm, and others thanks again for helping me. |
| 15:12.10 | *** join/#debian Soru_ (~quassel@27.Red-83-59-60.dynamicIP.rima-tde.net) |
| 15:13.21 | *** join/#debian asarch (~asarch@189.151.12.49) |
| 15:13.28 | asarch | A Twitter client for GNOME? |
| 15:14.23 | *** join/#debian karakedi (~eAC53C340@78.181.120.4) |
| 15:14.23 | *** join/#debian karakedi (~eAC53C340@unaffiliated/orphan) |
| 15:14.41 | Brilliant | asarch: apt-cache search twitter |
| 15:16.08 | *** join/#debian mtn (~mtn@174.32.161.70) |
| 15:16.18 | asarch | There was an app called Gwibber |
| 15:16.34 | asarch | But it seems that is not longer available (at least for stable) |
| 15:21.30 | *** join/#debian dtcrshr (~dataCrshr@187.39.85.126) |
| 15:21.30 | *** join/#debian dtcrshr (~dataCrshr@unaffiliated/datacrusher) |
| 15:22.24 | *** join/#debian Ryushin (chris@2001:1938:2a5::7008) |
| 15:22.40 | Brilliant | asarch: then, i dont know |
| 15:23.27 | *** join/#debian a-l-e (~quassel@72-77.195-178.cust.bluewin.ch) |
| 15:23.41 | *** join/#debian smica (~smica@host-88-132-114-184.prtelecom.hu) |
| 15:25.50 | asarch | Anyway, thank you Brilliant |
| 15:25.52 | *** join/#debian e1z0_ (~null@88.216.5.200) |
| 15:25.55 | asarch | Thank you very much :-) |
| 15:26.12 | *** join/#debian flux242 (~chatzilla@82.113.121.95) |
| 15:27.13 | *** join/#debian Giuuu (~Giuuuuu@host178-118-dynamic.15-87-r.retail.telecomitalia.it) |
| 15:27.33 | *** join/#debian StephenS (~StephenS@xshellz/founder/StephenS) |
| 15:27.36 | *** join/#debian e-mc^2 (~night_rid@gateway/tor-sasl/e-mc2/x-92663163) |
| 15:28.01 | *** join/#debian e1z0__ (~null@88.216.5.200) |
| 15:29.12 | *** join/#debian g_r_eek (~g_r_eek@ppp-94-69-23-217.home.otenet.gr) |
| 15:29.17 | *** join/#debian Havis (~Havis@adsl-dyn-236.95-102-57.t-com.sk) |
| 15:29.53 | *** join/#debian giuscri (~giuscri@host69-17-dynamic.21-79-r.retail.telecomitalia.it) |
| 15:29.54 | *** join/#debian ImageJPEG (~ImageJPEG@205.221.122.227) |
| 15:30.42 | *** part/#debian ImageJPEG (~ImageJPEG@205.221.122.227) |
| 15:31.04 | *** part/#debian giuscri (~giuscri@host69-17-dynamic.21-79-r.retail.telecomitalia.it) |
| 15:32.11 | *** join/#debian smica (~smica@host-88-132-114-184.prtelecom.hu) |
| 15:33.30 | *** join/#debian harobed (~stephane-@sab57-2-82-236-241-203.fbx.proxad.net) |
| 15:34.50 | a-l-e | hi. is there a (not too long) how-to explaining the setup of named virtual hosts (that should only available locally) with apache and debian testing? |
| 15:36.01 | a-l-e | i've been following http://www.debian-administration.org/articles/412 but beside the fact that it's not 100% correct anymore for the current debian testing, i don't find there how to get apache to serve my local site locally... |
| 15:36.58 | *** join/#debian alessand1o (~alessandr@thalion.alessandrovermeulen.me) |
| 15:39.03 | *** join/#debian StephenS (~new@xshellz/founder/StephenS) |
| 15:39.53 | *** join/#debian ksinny (~quassel@kde/developer/sinnykumari) |
| 15:40.41 | *** join/#debian giuscri (~giuscri@host69-17-dynamic.21-79-r.retail.telecomitalia.it) |
| 15:42.00 | *** join/#debian amaldo (~yaaic@pdpc/supporter/student/amaldo) |
| 15:45.41 | *** join/#debian Pascuas (547b84eb@gateway/web/freenode/ip.84.123.132.235) |
| 15:46.33 | Pascuas | Hello. I've got libc6 2.13 and I need (>= 2.15). WHat I do? |
| 15:46.44 | Pascuas | No be in synaptic |
| 15:46.58 | mumpitze1 | Pascuas: what do you need it for? |
| 15:47.08 | Pascuas | mumpitzel: aicrack-ng |
| 15:47.32 | Pascuas | mumpitzel: I need libc6 => 2.15 |
| 15:47.53 | flux242 | Pascuas: you're trying to install a package but it was compiled with a higher lib version& |
| 15:47.55 | flux242 | ? |
| 15:48.04 | rog1121 | uh, is there any the reboot command wouldnt be found? |
| 15:48.08 | Pascuas | flux242: yes |
| 15:48.09 | rog1121 | reason* |
| 15:48.09 | mumpitze1 | Pascuas: what repo are you getting this aircrack-ng from? url? |
| 15:48.23 | mumpitze1 | rog1121: you don't have sbin in your path, you are not root |
| 15:48.27 | Pascuas | http://ftp.fr.debian.org/debian/pool/main/a/aircrack-ng/aircrack-ng_1.1-6_amd64.deb |
| 15:48.37 | mumpitze1 | ,v aircrack-ng |
| 15:48.38 | judd | Package: aircrack-ng on i386 -- wheezy-backports: 1:1.1-6~bpo70+1; jessie: 1:1.1-6; sid: 1:1.1-6 |
| 15:49.01 | Pascuas | ?????????????????????????' |
| 15:49.03 | mumpitze1 | Pascuas: I suggest you get it from wheezy-backports. /msg dpkg backports |
| 15:49.21 | Pascuas | What? I don't understand nothing :S |
| 15:49.22 | flux242 | Pascuas: you may try to edit control file inside of the deb file and repack it |
| 15:49.40 | mumpitze1 | flux242: bad advice. it's already available via backports |
| 15:50.06 | Pascuas | flux242: and What I do? |
| 15:50.42 | mumpitze1 | Pascuas: ignore flux242's advice |
| 15:52.13 | Pascuas | edit control file, what f.. is this? |
| 15:53.04 | *** join/#debian wildc4rd (~nick@82.153.98.100) |
| 15:53.08 | armin | m( |
| 15:53.58 | *** join/#debian ShaneCurran (~shane@89.100.110.32) |
| 15:53.58 | *** join/#debian ShaneCurran (~shane@orchestra/user/TechieShane) |
| 15:54.36 | *** join/#debian bitwave (~bitwave@c-68-47-12-21.hsd1.ga.comcast.net) |
| 15:59.55 | *** join/#debian poncha (~poncha@unaffiliated/poncha) |
| 16:02.05 | *** join/#debian x-treme (~x-treme@unaffiliated/x-treme) |
| 16:04.32 | *** join/#debian mg (~mg@77-58-39-250.dclient.hispeed.ch) |
| 16:05.49 | *** join/#debian hashashin (~hashashin@unaffiliated/hashashin) |
| 16:07.10 | *** join/#debian guard163 (~misha163@80.234.90.47) |
| 16:07.27 | *** join/#debian darknyan (~darknyan@unaffiliated/darknyan) |
| 16:07.35 | *** join/#debian thunderrd (~thunderrd@119.42.79.179) |
| 16:07.48 | *** join/#debian richardb (~ribe@c83-255-131-198.bredband.comhem.se) |
| 16:08.57 | *** join/#debian DemonJester (~DemonJest@cpe-184-153-69-193.buffalo.res.rr.com) |
| 16:08.57 | *** join/#debian DemonJester (~DemonJest@fedora/DemonJester) |
| 16:10.42 | *** join/#debian cam (~cam@198.144.158.151) |
| 16:10.43 | *** join/#debian cam (~cam@trivialand/beta/cam) |
| 16:10.51 | *** part/#debian cam (~cam@trivialand/beta/cam) |
| 16:11.49 | *** join/#debian Guest5802 (1f0b5757@gateway/web/freenode/ip.31.11.87.87) |
| 16:11.56 | Guest5802 | if i install debian are i have installed gui ? |
| 16:12.21 | babilen | Guest5802: Depends on your selection, but yes. |
| 16:12.26 | babilen | dpkg: tell Guest5802 -about install debian |
| 16:12.50 | *** join/#debian e1z0 (~null@netlinux/founder/e1z0) |
| 16:12.56 | *** join/#debian gnuweb (~j@cpe-75-84-117-60.socal.res.rr.com) |
| 16:12.59 | *** join/#debian Soru (~quassel@27.Red-83-59-60.dynamicIP.rima-tde.net) |
| 16:13.03 | babilen | Guest5802: Which desktop environment would you like to use? (e.g. Gnome, XFCE, KDE, LXDE) Do you have a working internet connection during the installation? |
| 16:13.18 | babilen | Guest5802: |
| 16:14.28 | babilen | Guest5802: At the end of the installation you are being asked to select various "tasks" and one of them (Desktop) is the graphical system you are asking about. There are, as always, many ways to install the graphical system, but simply selecting that during the initial installation is the easiest. |
| 16:15.50 | *** join/#debian Sambler (~OKASO@unaffiliated/sambler) |
| 16:17.00 | *** join/#debian e1z0_ (~null@88.216.5.200) |
| 16:18.15 | *** join/#debian e1z0 (~null@88.216.5.200) |
| 16:18.15 | *** join/#debian e1z0 (~null@netlinux/founder/e1z0) |
| 16:19.25 | *** join/#debian yano (yano@freenode/staff/yano) |
| 16:20.10 | Some_Person | I'm trying to figure out the best way to give my dad access to the camera system at his work. The intended way to do this requires an ActiveX control, so that's out, but I've figured out how to access the MPEG4 stream from each camera |
| 16:22.07 | Some_Person | I've tried creating a webpage that uses HTML5 video to play them, but I get "Video format or MIME type not supported" |
| 16:22.52 | *** join/#debian amaldo (~yaaic@24-134-161-34-dynip.superkabel.de) |
| 16:22.53 | *** join/#debian amaldo (~yaaic@pdpc/supporter/student/amaldo) |
| 16:24.56 | *** join/#debian Auriga (~Malcom@host-2-102-162-186.as13285.net) |
| 16:25.40 | *** join/#debian l0p3n (~kristian@unaffiliated/l0p3n) |
| 16:25.44 | *** join/#debian impulse150 (~impulse15@port790.ds1-arc.adsl.cybercity.dk) |
| 16:26.36 | *** join/#debian bluesceada (~dennis@unaffiliated/bluesceada) |
| 16:27.06 | *** join/#debian HisaoNakai (~HisaoNaka@unaffiliated/contrapunctus) |
| 16:27.55 | oo_miguel | My server had a hard-disk failiure and I lost a couple of files, however I think it is nothing crucial. The following files are gone/corrupted: http://www.pastebin.ca/2445857 . Can somebody tell me if I can reconstruct them easily? |
| 16:27.56 | *** join/#debian _BJFreeman (~bjfree@101.sub-75-233-202.myvzw.com) |
| 16:28.02 | *** join/#debian e1z0 (~null@88.216.5.200) |
| 16:28.03 | *** join/#debian e1z0 (~null@netlinux/founder/e1z0) |
| 16:28.06 | *** join/#debian fenix (~kvirc@093105173050.bielskobiala.vectranet.pl) |
| 16:29.04 | *** part/#debian fenix (~kvirc@093105173050.bielskobiala.vectranet.pl) |
| 16:29.05 | mumpitze1 | oo_miguel: reinstall the packages which contain these files |
| 16:29.37 | oo_miguel | allright |
| 16:30.05 | *** join/#debian strop (~strop@a89-154-137-41.cpe.netcabo.pt) |
| 16:30.11 | strop | hi there |
| 16:30.34 | oo_miguel | thanks mumpitze1 |
| 16:30.52 | *** join/#debian mtn (~mtn@174.32.161.70) |
| 16:32.30 | Linuturk | what's the best way to install icedtea-7-plugin from sid to testing? |
| 16:32.31 | *** join/#debian dorito_125 (~dorito_12@108-71-149-228.lightspeed.mmphtn.sbcglobal.net) |
| 16:32.54 | *** join/#debian Havis (~Havis@adsl-dyn-236.95-102-57.t-com.sk) |
| 16:33.49 | *** join/#debian x-treme (~x-treme@unaffiliated/x-treme) |
| 16:34.27 | *** join/#debian porkchopdiet (~phw@82.211.8.243) |
| 16:34.44 | porkchopdiet | I ma looking for a calendar application (console based) that supports caldav. any hints? |
| 16:35.02 | *** join/#debian compcube (~compcube@pdpc/supporter/student/compcube) |
| 16:35.06 | oo_miguel | can I safely simply remover everything in /var/cache/apt/ ? |
| 16:37.32 | *** join/#debian MekkaGodzilla (~MekkaGodz@cxr69-3-82-224-150-128.fbx.proxad.net) |
| 16:39.56 | *** join/#debian MaddinXx (~racksteri@zux221-153-203.adsl.green.ch) |
| 16:40.32 | abrotman | oo_miguel: why do you need to? |
| 16:40.48 | *** join/#debian bullgard4 (~chatzilla@dslb-094-223-009-115.pools.arcor-ip.net) |
| 16:41.08 | *** join/#debian strixbg (~asd@93.123.41.167) |
| 16:41.14 | *** join/#debian expect (~expect@unaffiliated/expect) |
| 16:41.51 | oo_miguel | because the files in that directory are partly corrupted |
| 16:42.01 | oo_miguel | but i just did apt-get clean |
| 16:42.02 | abrotman | which files? |
| 16:42.12 | abrotman | they can't be "partly" corrupted, they are or they are not :) |
| 16:42.23 | strop | abrotman: lol, good point |
| 16:42.34 | *** join/#debian vladi (~vladi@93.123.41.167) |
| 16:42.49 | oo_miguel | abrotman: hehe :) |
| 16:43.06 | oo_miguel | abrotman: only *.deb files where affectd |
| 16:43.07 | *** join/#debian Berry6510 (~Berry@5356aee3.cm-6-7c.dynamic.ziggo.nl) |
| 16:43.12 | *** part/#debian compcube (~compcube@pdpc/supporter/student/compcube) |
| 16:43.20 | oo_miguel | but tbe apt-get clean removed them, so I think im allright now |
| 16:43.52 | oo_miguel | abrotman: with "partly" I meant that not ALL, but just some of the files are corrupted. |
| 16:43.53 | abrotman | oo_miguel: good deal |
| 16:43.55 | *** join/#debian e1z0 (~null@netlinux/founder/e1z0) |
| 16:44.58 | *** join/#debian whirlii (~whirli@a88-113-159-160.elisa-laajakaista.fi) |
| 16:45.02 | oo_miguel | :) |
| 16:47.22 | *** join/#debian ghostlines (~ghost@92.109.90.61) |
| 16:48.38 | *** join/#debian jstnc (jstnc@nat/rackspace/x-eseuktauyhfqqmuw) |
| 16:49.18 | *** join/#debian koshie (~koshie@ks3291815.kimsufi.com) |
| 16:50.23 | *** join/#debian wathek_ (~wathek@183.83.138.58) |
| 16:51.46 | JyZyXEL | what was the version of pastebinit that works? |
| 16:52.58 | *** join/#debian s3phir0th115 (~s3phir0th@pool-71-113-22-17.rcmdva.east.verizon.net) |
| 16:53.46 | *** join/#debian adb (~IonMoldom@47-122.1-85.cust.bluewin.ch) |
| 16:54.51 | *** join/#debian McMAGIC--Copy (~McMAGIC--@gateway/tor-sasl/mcmagic--copy) |
| 16:56.05 | *** join/#debian caravel (~caravel@83.230.147.44) |
| 16:56.24 | *** join/#debian redarrow_ (~redarrow@unaffiliated/redarrow) |
| 16:56.55 | *** join/#debian zmode (~zmode@unaffiliated/zmode) |
| 16:57.27 | *** join/#debian dawud (~dawud@238.Red-88-14-144.dynamicIP.rima-tde.net) |
| 16:57.37 | *** join/#debian timahvo1 (~rogue@197.237.174.93) |
| 16:57.54 | *** join/#debian landmerke (~landmerke@189-18-174-169.dsl.telesp.net.br) |
| 16:59.17 | *** join/#debian zr0 (~something@unaffiliated/zr0) |
| 16:59.49 | *** join/#debian dnai23 (~daniel@HSI-KBW-091-089-154-223.hsi2.kabel-badenwuerttemberg.de) |
| 17:01.20 | *** join/#debian patterson (~patterson@c-67-188-24-218.hsd1.ca.comcast.net) |
| 17:01.33 | *** join/#debian amkamk (~amk@5.178.64.237) |
| 17:01.39 | babilen | JyZyXEL: nopaste |
| 17:01.43 | *** part/#debian porkchopdiet (~phw@82.211.8.243) |
| 17:02.16 | *** join/#debian frustrum (~frustrum@ip68-4-122-232.oc.oc.cox.net) |
| 17:02.54 | *** join/#debian Mikrop (~mikrop@AMontsouris-651-1-141-100.w90-46.abo.wanadoo.fr) |
| 17:03.04 | *** join/#debian b_52globe (~b_52globe@41.249.11.137) |
| 17:06.09 | *** join/#debian chrisss404 (~chrisss40@85-127-252-172.dynamic.xdsl-line.inode.at) |
| 17:06.45 | *** join/#debian jehan (~jehan@kiel4-dmz.gis.de) |
| 17:06.52 | *** join/#debian Kaede (~Kaede@unaffiliated/kaede) |
| 17:07.06 | *** join/#debian Aramur (~arare@28.Red-81-32-228.dynamicIP.rima-tde.net) |
| 17:08.30 | *** join/#debian e1z0_ (~null@88.216.5.200) |
| 17:08.38 | *** join/#debian jned (~jned@d24-36-3-196.home1.cgocable.net) |
| 17:09.06 | *** join/#debian dna44 (~dna@pool-108-7-48-76.bstnma.fios.verizon.net) |
| 17:09.26 | *** join/#debian e1z0__ (~null@88.216.5.200) |
| 17:10.00 | *** mode/#debian [+l 1412] by debhelper |
| 17:10.14 | *** join/#debian polaco (~polaco@unaffiliated/polaco) |
| 17:10.42 | *** join/#debian alexei_ (~amgarchin@p4FD63881.dip0.t-ipconnect.de) |
| 17:10.47 | *** join/#debian tallest_red (~CNZ@ip98-169-205-124.dc.dc.cox.net) |
| 17:10.51 | *** join/#debian ribamar (~ribamar@187.113.74.72) |
| 17:12.31 | polaco | hello fellow debian users. I want to setup a proper VPN service on my digital ocean VM so I can use it when on public networks. Any good tips? What about OpenVPN? |
| 17:15.36 | *** join/#debian Doyle (~quassel@108.162.185.26) |
| 17:15.49 | *** part/#debian owen1 (~oren@2602:306:ce35:a00:2a92:4aff:fe30:7136) |
| 17:15.55 | Some_Person | It seems gecko-mediaplayer can do what I want, with one small issue: is there any way to make it stretch a video to 4:3? |
| 17:16.15 | *** join/#debian Mikrop (~mikrop@AMontsouris-651-1-141-100.w90-46.abo.wanadoo.fr) |
| 17:16.28 | *** join/#debian Buumi (~Jori@dsl-vsabrasgw1-50df29-6.dhcp.inet.fi) |
| 17:17.09 | *** join/#debian phrozen77 (~phrozen77@pdpc/supporter/77for7/phrozen77) |
| 17:17.51 | *** join/#debian Selveste1 (~hds@31.25.23.230) |
| 17:19.29 | *** join/#debian impulse150 (~impulse15@port790.ds1-arc.adsl.cybercity.dk) |
| 17:19.47 | *** join/#debian grandie (~Grandad@p57ACC8FB.dip0.t-ipconnect.de) |
| 17:20.06 | *** join/#debian nse1 (~leo@177.158.241.58) |
| 17:20.09 | *** join/#debian bluenemo (~bluenemo@g230185101.adsl.alicedsl.de) |
| 17:20.09 | *** join/#debian bluenemo (~bluenemo@unaffiliated/bluenemo) |
| 17:20.47 | *** join/#debian vladuke (~vladuke@178.130.42.7) |
| 17:22.07 | *** join/#debian patterson_ (~patterson@c-67-188-24-218.hsd1.ca.comcast.net) |
| 17:23.23 | *** join/#debian reazem (~reazem@unaffiliated/reazem) |
| 17:23.41 | *** join/#debian socomm (~socomm@96-40-132-102.dhcp.mtpk.ca.charter.com) |
| 17:23.49 | *** join/#debian d_arcy (~Day_dream@gar31-4-82-240-199-124.fbx.proxad.net) |
| 17:24.02 | *** join/#debian reavengrey (~reavengre@unaffiliated/reavengrey) |
| 17:25.18 | *** join/#debian DemonJester (~DemonJest@cpe-184-153-69-193.buffalo.res.rr.com) |
| 17:25.18 | *** join/#debian DemonJester (~DemonJest@fedora/DemonJester) |
| 17:25.24 | *** join/#debian reazem (~reazem@unaffiliated/reazem) |
| 17:26.21 | *** join/#debian alaunus (~connor@c-98-250-2-86.hsd1.mi.comcast.net) |
| 17:26.32 | *** join/#debian chaiz (~chaiz@ppp-124-121-55-184.revip2.asianet.co.th) |
| 17:27.42 | *** join/#debian f10 (~f10@p2211-ipbfp2102osakakita.osaka.ocn.ne.jp) |
| 17:27.42 | *** join/#debian MekkaGodzilla (~MekkaGodz@cxr69-3-82-224-150-128.fbx.proxad.net) |
| 17:28.00 | *** join/#debian x-treme (~x-treme@unaffiliated/x-treme) |
| 17:28.41 | *** join/#debian CyberGabber (~CyberGabb@188-180-ftth.onsbrabantnet.nl) |
| 17:28.43 | *** join/#debian amaldo (~yaaic@pdpc/supporter/student/amaldo) |
| 17:30.01 | *** mode/#debian [+l 1420] by debhelper |
| 17:30.32 | *** join/#debian CyberGabber (~CyberGabb@188-180-ftth.onsbrabantnet.nl) |
| 17:30.43 | *** join/#debian theows (~theows@66.55.141.84) |
| 17:30.46 | *** join/#debian JimLesta (~uzzer@unaffiliated/jimlesta) |
| 17:31.52 | Some_Person | There has to be some way to make it possible to view these cameras properly |
| 17:32.15 | Some_Person | gecko-mediaplayer seems unreliable for this (on a page with all the cameras, some randomly don't play) |
| 17:34.35 | gnarface | Some_Person: view what cameras now? |
| 17:34.55 | Some_Person | gnarface: Security cameras at my dad's work. I need to implement some way for him to access them in Linux |
| 17:35.03 | gnarface | Some_Person: you mean streaming video in a web browser, not actually a local camera device? |
| 17:35.06 | Some_Person | The normal way is through a web interface, but that relies on ActiveX |
| 17:35.11 | gnarface | ah |
| 17:35.25 | Some_Person | I've managed to access the MPEG4 stream of each camera directly, but need some way to display them |
| 17:35.48 | *** join/#debian mav (~mav@ibx.stepserver.nl) |
| 17:35.54 | gnarface | well i can just about guarantee that the activeX solution was cleverly designed to prevent that from working anywhere but the one version of windows they were sold in tandem with |
| 17:36.26 | *** join/#debian mowgl3y (~cejj@unaffiliated/mowgl3y) |
| 17:36.54 | *** join/#debian r00tN (~r00t@185.2.12.155) |
| 17:37.08 | Some_Person | Ideally, I want just a grid showing all the cameras, with the ability to click one to show it in full resolution (or perhaps fullscreen) |
| 17:37.12 | gnarface | if you can do some basic web coding though it should be possible to stream those mpeg4 streams (possibly with some transcoding) to some more universal web plugin (flash or the vlc plugin would be good options on linux) |
| 17:37.25 | Some_Person | vlc can't seem to play some of them for whatever reason. mplayer can |
| 17:37.39 | gnarface | they must be different cameras, or different video formats |
| 17:37.50 | gnarface | or maybe just older versions of the streaming server software |
| 17:38.02 | mowgl3y | hi guys. my wireless connection just disappeared. dmesg shows 'iwlwifi 0000:04:00.0: Time out reading EEPROM[0]' |
| 17:38.05 | Some_Person | They're all MPEG4 as far as I can tell, and coming off of the same server |
| 17:38.35 | alaunus | I just reinstalled Jessie with XFCE, but my notifications are really ugly (http://i.imgur.com/D0t44Vv.png) -- any idea how to fix them? |
| 17:38.48 | Some_Person | I tried using gecko-mediaplayer (mplayer plugin for firefox), but it randomly doesn't load some of them if I create a page showing all the cameras |
| 17:38.52 | Some_Person | so that's no good |
| 17:38.54 | gnarface | Some_Person: without knowing more specifics all i can give you is that its possible and mencoder or avconv/ffmpeg are the typical key piece to make it happen. the "grid view" for sorting and browsing though you're gonna need to make yourself or find elsewhere |
| 17:39.12 | Some_Person | I don't need sorting or anything though |
| 17:39.20 | *** join/#debian firecode (~irc@unaffiliated/firecode) |
| 17:39.38 | *** join/#debian azcodex (~azcodex_@4.Red-79-145-49.dynamicIP.rima-tde.net) |
| 17:39.50 | gnarface | alaunus: my assumption is you're missing some core gtk themes/engines or something like that |
| 17:40.23 | *** join/#debian Silmarilion (~Silmarili@cable-188-2-243-82.dynamic.sbb.rs) |
| 17:40.35 | Some_Person | It doesn't help that I'm not much of a coder |
| 17:40.58 | alaunus | gnarface: that's what I thought, too. Is there any way to check which ones it might be? |
| 17:41.25 | flux242 | Some_Person: there are projects in linux to show streams from different cameras, I just cannot recall the name |
| 17:41.26 | mowgl3y | i am on debian wheezy and it started asking for wireless password repeatedly and then the wireless connection disappeared. |
| 17:41.34 | *** join/#debian m4ggus (marcus@unaffiliated/m4ggus) |
| 17:41.39 | *** join/#debian hashmaster (~androirc@ip68-7-207-87.sd.sd.cox.net) |
| 17:42.09 | Some_Person | flux242: I've only found one (zoneminder), but it remains connected to the cameras 24/7 and I'm not sure I like that |
| 17:42.41 | flux242 | no, that's not it |
| 17:42.49 | gnarface | alaunus: that's a great question. sorry i don't know. if you know someone with the same window manager for whom its working right, you'd compare your package lists |
| 17:43.13 | gnarface | mowgl3y: sounds like your wifi device got hacked |
| 17:43.15 | *** join/#debian wathek_ (~wathek@183.83.138.58) |
| 17:43.24 | flux242 | Some_Person: check motion |
| 17:44.01 | Some_Person | I do also have the ability to get a live JPEG image from each camera too by the way, but I'm not sure that helps me |
| 17:44.05 | gnarface | Some_Person: check zoneminder too (no relation to the windows NT commercial firewall product) |
| 17:44.32 | Some_Person | gnarface: I just said that I don't like how zoneminder runs in the background and remains connected to the cameras |
| 17:44.39 | mowgl3y | gnarface: anyway i can make sure? whats the way out now? |
| 17:44.46 | *** part/#debian theows (~theows@66.55.141.84) |
| 17:44.47 | gnarface | Some_Person: most usb webcams output in motion jpeg natively; most do NOT natively output in mpeg4; that could explain the different behavior; different model cameras |
| 17:44.58 | Some_Person | It's not motion jpeg unfortunately, just plain jpeg |
| 17:45.03 | hashmaster | Ok so im back again, went through 4 different versions of linux, all the sameproblem. I can connect to my wifi but have no internet. Im reinstalling debian again and when its done ill jump on that box here, but until then any ideas |
| 17:45.24 | flux242 | Some_Person: http://en.wikipedia.org/wiki/Motion_%28surveillance_software%29 |
| 17:46.08 | mowgl3y | gnarface: my router isn't hacked. i have other systems on it. the password is same. |
| 17:46.20 | gnarface | mowgl3y: if its got a web console you can connect directly to with wired ethernet there should be some console where you can see mac addresses of connected clients/reserved dhcp leases; if you see anyone on there but you that's BAD. unfortunately i can't give you any specific information because i don't know your wifi router |
| 17:46.24 | *** join/#debian motto (~m@95.238.178.229) |
| 17:46.45 | gnarface | mowgl3y: if its got other clients and they're fine, you could have interference; check on the other clients |
| 17:47.18 | mowgl3y | gnarface: i checked on other clients. they all work. |
| 17:47.26 | gnarface | mowgl3y: #1 most common cause of bizarre unexplained wifi outages not related to hacking attempts by your neighbors or the government; microwaving your breakfast |
| 17:47.50 | mowgl3y | gnarface: 'iwlwifi 0000:04:00.0: Time out reading EEPROM[0]' is what i see in dmesg |
| 17:48.09 | gnarface | mowgl3y: *that* looks like hardware failure |
| 17:48.23 | gnarface | mowgl3y: but it could just be some race condition |
| 17:48.33 | mowgl3y | gnarface: race condition? |
| 17:48.38 | *** join/#debian drhouse123 (~drhouse12@2.134.154.171) |
| 17:49.03 | Some_Person | I almost feel like logging into the server and changing the cameras from MPEG4 to MJPEG (there actually is a setting for this, though my dad would not want me to touch it) |
| 17:49.17 | gnarface | mowgl3y: race condition: two programs contesting for computing resources at once and usually win the fight in the right order but sometimes don't, and then fail |
| 17:49.39 | gnarface | Some_Person: MJPEG is crushingly punishing on bandwidth usage |
| 17:49.52 | Some_Person | gnarface: Yeah, that's a good point |
| 17:50.01 | gnarface | Some_Person: if you have a lot of these cameras its likely some of them were put in mpeg4 mode on purpose to keep the network up |
| 17:50.10 | Some_Person | gnarface: They're all in mpeg4 mode |
| 17:50.35 | gnarface | Some_Person: but some just don't work i mpeg4 mode? and they're all the same model?... that's troubling... |
| 17:50.42 | *** join/#debian marlinc (~marlinc@2001:5c0:1505:e300:78:e5d2:2318:b01) |
| 17:50.48 | Some_Person | Some won't play in vlc. They all play in mplayer |
| 17:50.54 | mowgl3y | gnarface: ok. but i havent installed anything new and my wifi has been sound for months without any issues. |
| 17:51.20 | Some_Person | and no, they're not all the same model (though they are all coming off the same server) |
| 17:51.22 | *** join/#debian BotaniCar (~BotaniCar@93-139-45-143.adsl.net.t-com.hr) |
| 17:51.36 | mowgl3y | gnarface: should i try reinstalling the iwlwifi driver? |
| 17:52.31 | flux242 | mowgl3y: iwlwifi is probably in the kernel |
| 17:52.57 | *** join/#debian reazem (~reazem@unaffiliated/reazem) |
| 17:53.25 | flux242 | ah, no, it's marked as a module |
| 17:53.26 | *** join/#debian oleo (~oleo@xdsl-78-35-176-124.netcologne.de) |
| 17:53.44 | mowgl3y | flux242: how do i solve this then? i am clueless. |
| 17:53.59 | tvm | mowgl3y: firmware-iwlwifi is present ? |
| 17:54.10 | *** join/#debian rustyrazorblade (~rustyrazo@pool-71-118-174-148.lsanca.fios.verizon.net) |
| 17:54.15 | flux242 | I was just saying. Don't know the reason for your problem |
| 17:54.16 | gnarface | mowgl3y: intermittence will not be solved by a re-install. you should check for newer versions of the driver though... and anything else on your system... |
| 17:54.43 | mowgl3y | i installed it when installing the system. i never removed it. |
| 17:55.04 | tvm | mowgl3y: how are you connecting to the ap ? |
| 17:55.16 | *** join/#debian hellome (~lua@192.73.239.25) |
| 17:55.20 | mowgl3y | network-manager-kde |
| 17:55.22 | tvm | mowgl3y: could be 'network manager' issue ? tried to connect over plain wpa_supplicant ? |
| 17:55.41 | flux242 | mowgl3y: can you boot another distribution? maybe even windows |
| 17:55.51 | mowgl3y | no other distros. |
| 17:56.01 | *** join/#debian _p0g0_ (~jason@172-3-140-140.lightspeed.sntcca.sbcglobal.net) |
| 17:56.04 | Some_Person | Maybe I should just use zoneminder (though I really don't like the idea of a PC constantly accessing 29 mpeg4 streams |
| 17:56.08 | mowgl3y | i used live ubuntu usb. same issue. |
| 17:56.19 | mowgl3y | no wireless hardware. |
| 17:56.22 | *** join/#debian bitwave (~bitwave@c-68-47-12-21.hsd1.ga.comcast.net) |
| 17:56.23 | tvm | mowgl3y: hrm, the setup worked ? |
| 17:56.31 | *** join/#debian hellome (~lua@192.73.239.25) |
| 17:56.42 | Some_Person | That would have to take up a lot of bandwidth |
| 17:56.44 | flux242 | hm, maybe your wireless card has fried? |
| 17:56.52 | tvm | mowgl3y: i'd still try to using just basic tools, iwconfig and wpa_supplicant possibly |
| 17:56.56 | mowgl3y | i didnt set up. i just booted with the usb to check whether ubuntu detects my wrieless. it didnt. |
| 17:56.57 | *** join/#debian format_c (~format_c@2001:4dd0:ff00:8421:6e62:6dff:fe4a:e47d) |
| 17:57.15 | *** join/#debian papapep (~papapep@ubuntu/member/papapep) |
| 17:57.30 | *** part/#debian mg (~mg@77-58-39-250.dclient.hispeed.ch) |
| 17:57.37 | mowgl3y | ok. how do i check whether firmware-iwlwifi is present? |
| 17:58.12 | flux242 | what does say 'lshw -C net' |
| 17:58.15 | tvm | mowgl3y: dpkg -l firmware-iwlwifi for example |
| 17:58.45 | mowgl3y | ok iwconfig says 'no wireless extension' |
| 17:58.59 | tvm | so, it's not detected at all. |
| 17:59.07 | mowgl3y | no :( |
| 17:59.07 | *** join/#debian OneST8 (~onest8@76-10-128-88.dsl.teksavvy.com) |
| 17:59.08 | giuscri | mowgl3y: or simpler, just try `apt-get install firmware-iwlwifi`, no? |
| 17:59.16 | tvm | mowgl3y: could you paste dmesg somewhere ? |
| 17:59.20 | mowgl3y | and the firmware-iwlwifi is present |
| 17:59.30 | mowgl3y | ya sure i will. |
| 17:59.32 | mowgl3y | just a sec |
| 17:59.42 | flux242 | mowgl3y: check lshw first as I said |
| 17:59.56 | *** join/#debian dep_ (~marcus@c-62-220-183-22.cust.bredband2.com) |
| 18:00.23 | *** part/#debian giuscri (~giuscri@host69-17-dynamic.21-79-r.retail.telecomitalia.it) |
| 18:00.39 | mowgl3y | this is the dmesg http://paste.debian.net/37033/ |
| 18:00.46 | OneST8 | Hi all, I'm researching my migration away from google apps... looking for replacement services for the following: imap, caldav/ical and carddav... does anyone have suggestions/experience? |
| 18:00.47 | *** join/#debian CutMeOwnThroat (~boo@unaffiliated/iridos) |
| 18:01.20 | *** join/#debian sferry (~samuel@173-23-232-28.client.mchsi.com) |
| 18:01.20 | *** join/#debian sferry (~samuel@atheme/member/samferry) |
| 18:01.25 | *** join/#debian BenNZ (~Ben__@226.7.252.27.dyn.cust.vf.net.nz) |
| 18:01.33 | mowgl3y | lshw command not found |
| 18:01.41 | *** join/#debian reavengrey (~reavengre@190-59-1-64.dynamic.tstt.net.tt) |
| 18:01.45 | *** join/#debian reavengrey (~reavengre@unaffiliated/reavengrey) |
| 18:02.07 | abrotman | install it |
| 18:02.20 | tvm | mowgl3y: this looks like hardware problem |
| 18:02.45 | mowgl3y | tvm: fuck |
| 18:03.43 | flux242 | yep, eeprom is damaged or something |
| 18:04.32 | tvm | or the device is in some odd state that can't be handled by the driver |
| 18:04.40 | *** join/#debian rmdashrf (~rmdashrf@128.54.202.114) |
| 18:04.49 | *** join/#debian rmdashrf (~rmdashrf@unaffiliated/rmdashrf) |
| 18:05.19 | tvm | mowgl3y: perhaps try to remove the iwlwifi module and reload it |
| 18:05.21 | mowgl3y | btw this is the lshw output http://paste.debian.net/37038/ |
| 18:05.28 | tvm | mowgl3y: rmmod iwlwifi; modprobe iwlwifi |
| 18:05.35 | mowgl3y | ok |
| 18:05.36 | tvm | and check the dmesg |
| 18:06.09 | *** join/#debian e1z0 (~null@netlinux/founder/e1z0) |
| 18:06.44 | *** join/#debian binaryhat (~binaryhat@pool-96-224-67-193.nycmny.east.verizon.net) |
| 18:07.20 | mowgl3y | this is the dmesg output http://paste.debian.net/37039/ |
| 18:07.25 | *** join/#debian sting_auer (18023beb@gateway/web/freenode/ip.24.2.59.235) |
| 18:07.31 | mowgl3y | of rmmod iwlwifi; modprobe iwlwifi |
| 18:07.40 | *** join/#debian Myconix (~Myconix@c-76-18-186-82.hsd1.tn.comcast.net) |
| 18:07.47 | tvm | hmm, still same. |
| 18:07.52 | mowgl3y | ya |
| 18:08.00 | flux242 | mowgl3y: buy a new card |
| 18:08.07 | flux242 | they are chep |
| 18:08.10 | flux242 | cheap |
| 18:08.11 | tvm | i'll check the kernel sources |
| 18:08.15 | *** join/#debian arif-ali (~arif-ali@2.28.240.18) |
| 18:08.30 | *** join/#debian Konrad127123 (~konrad@bband-dyn76.178-40-79.t-com.sk) |
| 18:08.32 | mowgl3y | flux242: i might have to. this laptop is like 4 years old. |
| 18:09.04 | *** join/#debian azcodex (~azcodex_@4.Red-79-145-49.dynamicIP.rima-tde.net) |
| 18:09.08 | mowgl3y | i might have to buy the usb wifi cards. because i bought this laptop abroad and no one here is going to touch it. |
| 18:09.50 | *** join/#debian iscream_ (5e156bb3@gateway/web/freenode/ip.94.21.107.179) |
| 18:10.33 | *** join/#debian drhouse123 (~drhouse12@2.134.154.171) |
| 18:10.50 | iscream_ | hello, could someone help me to get hard disks shown in Dolphin? I installed a minimal KDE and have no idea what it needs for that. |
| 18:11.03 | *** join/#debian xSmurf (~MrSmurf@unaffiliated/mrsmurf) |
| 18:11.08 | abrotman | so install the rest of kde? |
| 18:11.25 | iscream_ | I don't need the rest of KDE... |
| 18:11.30 | abrotman | oh okay |
| 18:11.34 | *** join/#debian Arsenik (~Cyanure@81-64-170-44.rev.numericable.fr) |
| 18:11.35 | *** part/#debian Myconix (~Myconix@c-76-18-186-82.hsd1.tn.comcast.net) |
| 18:12.03 | iscream_ | thus why I installed the minimum and then what specific KDE apps I needed. But I don't know what is needed for Dolphin to show them |
| 18:12.11 | *** part/#debian sting_auer (18023beb@gateway/web/freenode/ip.24.2.59.235) |
| 18:12.23 | mowgl3y | anyways thanks a lot guys!! :) |
| 18:12.54 | babilen | tvm: I'd generally recommend to use "modprobe -r" rather than "rmmod" to remove modules. |
| 18:13.52 | tvm | babilen: yeah, i know now, back in 2007 when i was doing my LPIC certification, rmmod was the "way", so i'm stuck with that in my head, but i'm aware of modprobe -r |
| 18:13.58 | tvm | babilen: as it handles dependencies aswell, iirc |
| 18:14.00 | *** join/#debian dep_ (~marcus@c-62-220-183-22.cust.bredband2.com) |
| 18:14.11 | *** join/#debian pkv (~pkv@dau94-2-82-66-64-67.fbx.proxad.net) |
| 18:14.53 | *** join/#debian dep_ (~marcus@c-62-220-183-22.cust.bredband2.com) |
| 18:15.00 | flux242 | I really do not understand the paradigm of the kde desktops. What the hack is an activity? |
| 18:15.07 | mowgl3y | 2 wireless cards down in 3 days. fml |
| 18:15.21 | *** join/#debian dep_ (~marcus@c-62-220-183-22.cust.bredband2.com) |
| 18:15.33 | *** part/#debian JimLesta (~uzzer@unaffiliated/jimlesta) |
| 18:16.18 | tvm | mowgl3y: i've checked the sources, the driver tries to obtain data from the EEPROM, namely MAC address and does some sanity (ECC) checks |
| 18:16.33 | tvm | mowgl3y: if it isn't able to obtain sane data, it throws you the error you just saw |
| 18:16.39 | *** join/#debian na1rb (~nairb@unaffiliated/na1rb) |
| 18:16.45 | *** join/#debian teonat (UNi@5.9.67.238) |
| 18:17.00 | *** join/#debian Sambler (~OKASO@unaffiliated/sambler) |
| 18:17.01 | tvm | mowgl3y: you might be able to flash the EEPROM though and fix it |
| 18:17.16 | mowgl3y | tvm: how do i do it? |
| 18:17.36 | babilen | tvm: exactly :) |
| 18:19.11 | mowgl3y | tvm: can i try this at home? |
| 18:19.46 | *** join/#debian impulse150 (~impulse15@port790.ds1-arc.adsl.cybercity.dk) |
| 18:23.50 | mowgl3y | i don't think flashing eeprom is something i can do. |
| 18:24.19 | *** join/#debian grandie (~Grandad@p57ACC8FB.dip0.t-ipconnect.de) |
| 18:25.26 | tvm | well, yeah, it won't be easy that's for sure, i still think that the device is in some odd state though, read only EEPROM will not just suddenly break (in most cases) |
| 18:25.26 | *** join/#debian mrtux (~mrtux@unaffiliated/mrtux) |
| 18:25.30 | mrtux | Hi |
| 18:25.35 | mrtux | I have a quick question |
| 18:25.42 | mrtux | I'm going to switch from arch linux to debian |
| 18:25.49 | mrtux | but theres a few issues i can think of |
| 18:26.11 | mrtux | My computer for some reason puts dellutility on the first partition on the disk. |
| 18:26.35 | Nik05 | you can keep it there |
| 18:26.40 | gnarface | mrtnt: how is that an issue? delete it |
| 18:26.47 | Nik05 | or delete it :) |
| 18:26.48 | mrtux | and then i have a seperate home partition |
| 18:26.54 | mrtux | if i delete it it comes back. |
| 18:26.59 | gnarface | fascinating |
| 18:27.03 | *** join/#debian milosn (~milosn@cable-178-149-0-183.dynamic.sbb.rs) |
| 18:27.09 | gnarface | never happened to me... |
| 18:27.17 | mowgl3y | tvm: ya thats beyond me. ok. thanks a lot. cheers. |
| 18:27.18 | gnarface | never had a new dell though |
| 18:27.26 | mrtux | ah my system is an older one |
| 18:27.30 | mrtux | dimension 4600 |
| 18:27.33 | abrotman | !enter |
| 18:27.33 | dpkg | The enter key is not a substitute for punctuation. Hitting enter unnecessarily makes it difficult to follow what you are saying. Consider using ',', '. ', ';', '...', '---', or ':' instead. If you hit enter too often, you will be autokicked by debhelper for flooding the channel. |
| 18:28.48 | smw | Is there a way to install a package (with all required package) to a chroot? I don't want a full debian system (debootstrap), but I want a specific service and dependency that I can run in a chroot/lxc container |
| 18:29.12 | *** part/#debian mrtux (~mrtux@unaffiliated/mrtux) |
| 18:29.14 | tvm | mowgl3y: wait for a bit, maybe i have something here |
| 18:29.17 | *** part/#debian papapep (~papapep@ubuntu/member/papapep) |
| 18:30.01 | *** mode/#debian [+l 1411] by debhelper |
| 18:30.45 | *** join/#debian Chetic (~Chetic@c83-250-75-148.bredband.comhem.se) |
| 18:31.00 | mowgl3y | tvm: i am here. |
| 18:31.06 | *** join/#debian blackest_mamba (~blackest_@c-50-141-243-243.hsd1.il.comcast.net) |
| 18:33.11 | *** join/#debian DocMAX (DocMAX@g231052157.adsl.alicedsl.de) |
| 18:35.08 | hashmaster | Ok so now im confused, debian installed, rebooted and disconnected for the wired internet connection, connecred via wifi internet was good. Rebooted again and checked, still worked. Now 1 odd thing I went to power off and it just rebooted my computer, so I just turned it off and moved it to its location in the garage, booted up connected to my wifi network and no internet. The only 2 things that have changes are the mouse& keyboard connect |
| 18:35.59 | *** join/#debian mczcoder (~Anonmcz@189-81-23-243.user.veloxzone.com.br) |
| 18:36.33 | *** join/#debian White_Light (~Riot@76.84.90.221) |
| 18:37.21 | tvm | mowgl3y: modprobe -r iwlwifi; modprobe iwlwifi fw_restart=1 wd_disable=1 power_save=1 amsdu_size_8K=0 |
| 18:37.47 | tvm | mowgl3y: try that as last resort, the next step would be to use kernel with enabled debugging for iwlwifi, to get more info, what is wrong |
| 18:37.59 | tvm | mowgl3y: as it isn't compiled in by default |
| 18:39.15 | *** join/#debian drhouse123 (~drhouse12@2.134.154.171) |
| 18:39.23 | mowgl3y | tvm: alright. i will try those. |
| 18:39.51 | *** join/#debian codesoup (~codesoup@76-10-140-212.dsl.teksavvy.com) |
| 18:39.57 | *** join/#debian codekK (codekK@unaffiliated/codekk) |
| 18:40.13 | tvm | hashmaster: what is your network configuration ? can you ping ? paste your /etc/network/interfaces somewhere |
| 18:40.26 | tvm | hashmaster: also, are you using some 'connection manager' ? |
| 18:40.52 | *** join/#debian ex-parrot (~ex-parrot@2401:f000:20:0:7256:81ff:fea3:465) |
| 18:41.22 | *** join/#debian mtn (~mtn@174.32.161.70) |
| 18:42.14 | codekK | Hi all, i have a problem after a few time without use my laptop with debian sid, i upgrade it (aptitude update & aptitude safe-upgrade) and now when i try aptitude update i get this message: E: Release file for http://ftp.es.debian.org/debian/dists/sid/InRelease is expired ... Updates for this repostiroy will not be applied and if i try upgrade or install i cant because i think he is calling |
| 18:42.14 | codekK | to this repository |
| 18:42.19 | codekK | (sry for my english) :( |
| 18:42.21 | mowgl3y | tvm: i did. nothing comes up in dmesg |
| 18:42.47 | hashmaster | I brought the box back inside hold on a sec |
| 18:43.05 | *** join/#debian arif-ali (~arif-ali@2.28.240.18) |
| 18:44.08 | *** join/#debian xandrea (~andrea@37.183.33.19) |
| 18:44.11 | mowgl3y | tvm: this bit is new. after those 2 commands. http://paste.debian.net/37053/ |
| 18:44.20 | *** join/#debian mayhew (~mayhew@hlfxns0163w-047055060204.dhcp-dynamic.FibreOp.ns.bellaliant.net) |
| 18:44.22 | *** join/#debian bariumbitmap (~nbeaver@108-241-79-18.lightspeed.cicril.sbcglobal.net) |
| 18:45.01 | *** join/#debian ghostlines (~ghost@92.109.90.61) |
| 18:45.28 | mowgl3y | tvm: brb 2 mins. |
| 18:46.01 | codekK | cant help me? :( |
| 18:46.09 | *** join/#debian Vicissitude (~Vicissitu@pdpc/supporter/active/vicissitude) |
| 18:47.10 | mumpitze1 | codekK: you run sid. you should help yourself. heck, you didn't even do basic troubleshooting like checking modules, iwlist, etc |
| 18:47.48 | codekK | i use sid just for it |
| 18:47.50 | abrotman | mumpitze1: i think you got channels crossed ? |
| 18:47.54 | codekK | for learn more about linux |
| 18:47.59 | comradekingu | codekK: I think that was fixed in apt recently |
| 18:47.59 | codekK | now i solve it |
| 18:48.15 | mumpitze1 | abrotman: probably |
| 18:48.19 | *** join/#debian mowgl3y (~cejj@unaffiliated/mowgl3y) |
| 18:48.30 | codekK | but mumpitze1 but just im learning and sometimes need help when im trying a one think about a hour |
| 18:48.37 | codekK | and i dont solve it :S |
| 18:48.37 | comradekingu | codekK: I remember reading about it in the changelogs |
| 18:48.43 | codekK | ok |
| 18:48.44 | codekK | i solve it |
| 18:48.48 | codekK | thanks anyway |
| 18:48.59 | comradekingu | codekK: :) |
| 18:49.06 | xandrea | hi guys |
| 18:49.10 | xandrea | I really really cannot understand why my bind configuration doesn't work |
| 18:49.12 | codekK | just sry for ask but i think this is a channel for talk about debian or not? |
| 18:49.52 | tvm | mowgl3y: what kernel are you running ? |
| 18:50.00 | *** join/#debian x2_4_16_256 (~Thunderbi@cpe-184-57-58-33.columbus.res.rr.com) |
| 18:50.02 | *** join/#debian Buumi (~jori@dsl-vsabrasgw1-50df29-6.dhcp.inet.fi) |
| 18:50.06 | *** join/#debian zr0 (~something@unaffiliated/zr0) |
| 18:50.15 | *** join/#debian x2_4_16_256 (~Thunderbi@cpe-184-57-58-33.columbus.res.rr.com) |
| 18:50.19 | mowgl3y | tvm: 3.2 |
| 18:50.22 | xandrea | I want to setup dns server in my lan, coz need a local mail server |
| 18:50.43 | mowgl3y | tvm: Kernel: 3.2.0-4-amd64 |
| 18:51.07 | *** part/#debian HALEB0B (~HALEB0B@unaffiliated/haleb0b) |
| 18:51.11 | *** join/#debian waka (~wakariera@unaffiliated/waka) |
| 18:51.17 | xandrea | I reader a lot of how to … and I think it's correct… but doesn't work |
| 18:51.20 | *** join/#debian reavengrey (~reavengre@unaffiliated/reavengrey) |
| 18:51.27 | *** join/#debian e1z0 (~null@88.216.5.200) |
| 18:51.27 | *** join/#debian e1z0 (~null@netlinux/founder/e1z0) |
| 18:53.06 | *** join/#debian ke-esc (~ken@unaffiliated/ke-esc) |
| 18:53.30 | *** join/#debian valgrind (~valgrind@76.Red-83-61-163.dynamicIP.rima-tde.net) |
| 18:53.53 | tvm | mowgl3y: i'd try newer kernel perhaps, if possible |
| 18:54.01 | *** join/#debian zerick2 (~zerick@190.118.37.136) |
| 18:54.14 | tvm | mowgl3y: or download some other distro with bleeding edge kernel onto USB stick and try booting it ? |
| 18:54.18 | *** join/#debian hashmaster1 (4407cf57@gateway/web/freenode/ip.68.7.207.87) |
| 18:54.25 | hashmaster1 | ok |
| 18:54.27 | babilen | xandrea: I'd recommend setting up unbound unless you *really* need to run an authorative server. And in that case you can run unbound and NSD |
| 18:54.41 | *** part/#debian vjarjadian_ (~IceChat77@176.254.37.210) |
| 18:54.43 | ke-esc | Using Jessie, I'm having some issues setting up an OpenVPN connection in network manager.. Firstly, if I try to import the ovpn file, the window just closes and nothing is imported. If I try to set up manually I just get a connection timeout in syslog... Running openvpn ~/airvpn.ovpn works just fine though |
| 18:54.47 | babilen | xandrea: Basic setup is discussed in README.Debian* |
| 18:55.02 | hashmaster1 | ok so i had to find a weebbased irc since i cant seem to get a regular irc |
| 18:55.27 | babilen | ke-esc: You want #debian-next - Please also provide information about your session (which window manager/desktop environment and how do you start it?) |
| 18:55.37 | babilen | ke-esc: Ah, #debian-next on irc.oftc.net |
| 18:55.42 | hashmaster1 | and im connected via wifi, it works here next to my router. but as soon as i move it no more internet |
| 18:55.47 | abrotman | ke-esc: is this with gnome3 ? |
| 18:55.58 | mowgl3y | tvm: ya i might do it. but i have to backup my data first. |
| 18:56.04 | *** join/#debian rryoumaa (~unknown@ip68-226-110-213.ph.ph.cox.net) |
| 18:56.10 | ke-esc | babilen, ahh sorry then for ot question.. is oftc.net on freenode? |
| 18:56.18 | ke-esc | abrotman, yea |
| 18:56.33 | abrotman | ke-esc: there was a package you had to install that was not installed by default IIRC |
| 18:56.34 | tvm | mowgl3y: you don't need to reinstall anything, just compile/install newer kernel, you don't need to reinstall anything |
| 18:56.39 | mowgl3y | tvm: also 1 more thing. i just rebooted and i dont find the 'EEPROM message' in dmesg. is this normal? |
| 18:57.01 | tvm | mowgl3y: eh ? so what's there then ? |
| 18:57.20 | *** join/#debian hesco (~hesco@c-50-147-240-136.hsd1.ga.comcast.net) |
| 18:57.22 | *** join/#debian reavengr1y (~reavengre@unaffiliated/reavengrey) |
| 18:57.27 | babilen | ke-esc: No, oftc.net is a different IRC network. (irc.oftc.net or irc.debian.org) -- see /topic too. |
| 18:57.28 | mowgl3y | tvm: theres other messages but nothing regarding EEPROM |
| 18:57.35 | abrotman | ke-esc: is network-manager-vpnc-gnome installed? |
| 18:57.36 | tvm | mowgl3y: paste |
| 18:57.38 | mowgl3y | tvm: wait |
| 18:57.42 | rryoumaa | installing 0ad results in a bug about tex-gyre being owned by adobe or similar. i presume this means the source is available for inspection but not under dfsg terms? |
| 18:57.51 | *** join/#debian Sjors (~sgielen@foo.kassala.de) |
| 18:57.56 | *** join/#debian case` (~case@90.218.115.208) |
| 18:58.19 | *** join/#debian eval (~eval@net-93-148-146-189.cust.dsl.teletu.it) |
| 18:58.26 | ke-esc | abrotman, no, isn't vpnc for cisco vps? |
| 18:58.33 | hashmaster1 | tvm: http://paste.debian.net/37064/ |
| 18:58.38 | ke-esc | babilen, ok thank you- will head over there |
| 18:58.41 | mowgl3y | tvm: here it is http://paste.debian.net/37065/ |
| 18:58.44 | *** join/#debian olegfusion (~olegfusio@46.191.226.49) |
| 18:58.49 | abrotman | ke-esc: or whatever what you need, so network-manager-gnome-openvpn or whichever you need |
| 18:59.07 | abrotman | network-manager-openvpn-gnome |
| 18:59.12 | rryoumaa | also, does apt-listbugs understand when you are running wheezy and not show you bugs that don't apply to wheezy? |
| 18:59.17 | babilen | ke-esc: Please make sure you have *both* network-manager-openvpn-gnome and network-manager-openvpn installed. Which login manager do you use? |
| 18:59.17 | ke-esc | abrotman, ok yes well i have installed network-manager-openvpn-gnome |
| 18:59.40 | tvm | mowgl3y: it completely missed the wireless card, what if you modprobe iwlwifi now ? |
| 18:59.50 | hesco | working with a fresh (two week old) installation of D7/wheezy, having just rebooted my machine, I managed to free up the RAM, but my load average continues to hover around 43 +/-. Top is consistently listing this process at the top: /usr/bin/Xorg :0 -br -verbose -novtswitch -auth /var/run/gdm3/auth-for-Debian-gdm-tQ91MO/database -nolisten tcp vt7 |
| 19:00.00 | *** mode/#debian [+l 1419] by debhelper |
| 19:00.24 | hesco | what can I do please to reclaim this machine, apparently from my Xorg process? |
| 19:00.28 | *** join/#debian Steeler (~steeler@dynamic-adsl-94-34-52-204.clienti.tiscali.it) |
| 19:00.32 | tvm | hashmaster1: your configuration doesn't configure your network interfaces in any way, no wonder that nothing works |
| 19:00.49 | *** join/#debian Tuxist (~quassel@p4FEEC1F2.dip0.t-ipconnect.de) |
| 19:01.08 | ke-esc | babilen, I do... I'm actually not sure what login manager actually...i'm guessing gdm :) |
| 19:01.19 | mowgl3y | tvm: ok |
| 19:01.20 | hashmaster1 | tvm: yet im connected to the wifi right now |
| 19:01.26 | *** join/#debian mentor (~mentor@178.16.11.167) |
| 19:01.31 | *** join/#debian frustrum (~frustrum@ip68-4-122-232.oc.oc.cox.net) |
| 19:01.33 | babilen | ke-esc: Could you check your ~/.xsession-errors and/or paste it to http://paste.debian.net ? Please also take a look at #696966 #703892 and #714373 if you haven't already. |
| 19:01.46 | *** join/#debian mentor (~mentor@unaffiliated/mentor) |
| 19:01.46 | tvm | hashmaster1: so, you apparently use some other software to configure and start your network |
| 19:01.47 | babilen | ke-esc: Well, check which login manager you use please. |
| 19:02.08 | tvm | hashmaster1: so, everything depends solely on the configuration of that given software |
| 19:02.35 | mowgl3y | tvm: this is the new bit http://paste.debian.net/37068/ |
| 19:02.46 | ke-esc | babilen, gdm3 |
| 19:02.50 | babilen | ack, ta |
| 19:03.00 | *** join/#debian fedesilva (~fedesilva@r190-135-78-35.dialup.adsl.anteldata.net.uy) |
| 19:03.07 | hashmaster1 | tvm: idk. as soon as i move my tower away from my router to put it where its supposed to go i lose the ability to get online. but i can still connect to my wifi network |
| 19:03.12 | *** join/#debian Leryan (~florent@2a01:e35:8a3f:81f0:1a03:73ff:fe61:8f61) |
| 19:04.33 | tvm | hashmaster1: *how* do you connect ? |
| 19:04.41 | *** join/#debian Zyferus (Zyferus@c-24-2-8-110.hsd1.mo.comcast.net) |
| 19:04.56 | tvm | mowgl3y: is there something after that ? |
| 19:05.11 | *** join/#debian Guest41260 (1f0b5371@gateway/web/freenode/ip.31.11.83.113) |
| 19:05.24 | ke-esc | babilen, http://paste.debian.net/37069/- about to pull up the other references you gave.. are those paste ids? |
| 19:05.25 | mowgl3y | tvm: nope. nothing. |
| 19:06.32 | JyZyXEL | what is the timecode dmesg displays called? |
| 19:06.47 | JyZyXEL | [ 307.103620] kjournald starting. Commit interval 5 seconds |
| 19:06.50 | JyZyXEL | that 307.103620 |
| 19:06.55 | hashmaster1 | tvm: well it has my wifi info stored, automaticly connects to my wifi, once i turn on my tower. ive even disconnected, forgot and reconnected to my network nothing different |
| 19:07.18 | *** join/#debian xBytez (~xbytez@2a00:f48:1025:feed:b00b:feed:7ae9:4cde) |
| 19:07.33 | tvm | JyZyXEL: it's just time delta, you can use dmesg -T for human readable format |
| 19:07.45 | JyZyXEL | tvm: how do i get the current delta? |
| 19:07.49 | tvm | hashmaster1: it's matter of your software |
| 19:08.03 | hashmaster1 | tvm: ok |
| 19:08.12 | JyZyXEL | tvm: there are no current lines on my dmesg so i don't know what the current delta is :\ |
| 19:08.29 | tvm | JyZyXEL: tried dmesg -T ? |
| 19:08.41 | hashmaster1 | tvm: what might be the software reason |
| 19:08.43 | JyZyXEL | oh yeah... :p |
| 19:09.03 | *** join/#debian e1z0 (~null@netlinux/founder/e1z0) |
| 19:09.15 | tvm | hashmaster1: well, i still don't know what you're using to connect to wifi |
| 19:09.19 | JyZyXEL | tvm: wait no actually its a special case where i need to know what the current non-human readable delta is |
| 19:09.35 | hashmaster1 | a sabrent usb wifi dongle |
| 19:09.38 | *** join/#debian deni (~deni@daenerys.initeq.net) |
| 19:09.39 | JyZyXEL | i need to compare it to something earlier |
| 19:09.57 | mowgl3y | tvm: brb rebooting |
| 19:10.00 | *** mode/#debian [+l 1413] by debhelper |
| 19:10.01 | JyZyXEL | can i do something that will generate a dmesg event? :p |
| 19:10.08 | *** join/#debian sary (~sm1ble@pdpc/supporter/student/sary) |
| 19:10.08 | deni | can anyone help me with setting up postfix.... i'm getting an error that doesn't make sense: http://pastebin.com/zws9nGKZ |
| 19:10.15 | *** join/#debian greenride (~purplehaz@71.202.102.140) |
| 19:10.16 | deni | it's telling me to add a filter that's already there |
| 19:10.22 | JyZyXEL | preferably something that doesn't destroy the ssytem |
| 19:11.00 | abrotman | deni: there is a #postfix |
| 19:11.12 | hashmaster1 | tvm: Bus 001 Device 003: ID 0bda:8176 Realtek Semiconductor Corp. RTL8188CUS 802.11n WLAN Adapter |
| 19:11.29 | *** join/#debian drhouse123 (~drhouse12@2.134.154.171) |
| 19:11.33 | tvm | JyZyXEL: echo 'Right now!' > /dev/kmsg |
| 19:11.39 | tvm | JyZyXEL: as root, apparently |
| 19:11.48 | *** join/#debian spade (~rheturd@109.201.152.228) |
| 19:12.04 | JyZyXEL | oh yeah that does it |
| 19:12.44 | greenride | When I run `apt-get install hplip`, I get the error message `Can't open /etc/hp/hplip.conf: No such file or directory.` |
| 19:12.54 | babilen | ke-esc: Are you sure that you ovpn file is correct? (you get lots of " WARNING **: Invalid setting VPN: ca" errors) |
| 19:13.27 | deni | abrotman: and there is no activity there i know :D |
| 19:13.37 | *** join/#debian mowgl3y (~cejj@unaffiliated/mowgl3y) |
| 19:13.39 | *** join/#debian robcsi (~robcsi@188.24.105.80) |
| 19:14.08 | *** join/#debian well_laid_lawn (~Jean-luc@d58-106-18-163.rdl801.qld.optusnet.com.au) |
| 19:14.14 | ke-esc | babilen, when using OpenVPN directly (i.e. "#openvpn ~/.airvpn/airvpn.ovpn"), it connects properly so I would assume it to be fine |
| 19:14.16 | *** join/#debian tormen__ (~me@no-panic.eu) |
| 19:14.18 | *** join/#debian m8 (~m@unaffiliated/m8) |
| 19:14.49 | *** part/#debian ke-esc (~ken@unaffiliated/ke-esc) |
| 19:15.23 | *** join/#debian reavengrey (~reavengre@unaffiliated/reavengrey) |
| 19:15.52 | guampa | do you guys know some docs on best practices on using sid? specifically upgrade strategies, frequency of upgrades, making decisions on if and when to upgrade, stay informed about problematic upgrades, and so |
| 19:16.36 | mowgl3y | tvm: i rebooted again. and it skipped the wireless bit again. http://paste.debian.net/37071/ |
| 19:17.04 | jelly-home | guampa: have you read the sid faq? /msg dpkg sid faq |
| 19:17.04 | rryoumaa | when i run sensible-browser from apt-listbugs, it breaks because it tries w3m in a dumb terminal. the man page for sensible-browser fails to show options for it. update-alternatives does not understand it. how do i change sensible-browser? |
| 19:17.05 | tvm | mowgl3y: modprobe iwlwifi does anything ? |
| 19:17.27 | mayhew | guampa: look into apt-listbugs |
| 19:17.37 | abrotman | guampa: if you have to ask, please don't |
| 19:17.50 | guampa | i have to start somewhere |
| 19:17.53 | jelly-home | at least he's asking right questions |
| 19:18.02 | mowgl3y | tvm: 1 sec |
| 19:18.04 | guampa | installed apt-listbugs already |
| 19:18.11 | *** join/#debian blagora (~blagora@host86-190-232-204.wlms-broadband.com) |
| 19:18.12 | guampa | thanks for the pointers! |
| 19:18.23 | jelly-home | guampa: sid isn't for "using" as much as "fixing" |
| 19:18.51 | guampa | two months already and so far all good |
| 19:18.53 | mayhew | jelly-home: IDK, I know lots of people using sid without issues |
| 19:18.55 | *** join/#debian b_52globe (~b_52globe@41.248.181.146) |
| 19:18.56 | *** join/#debian nighter (nighter@nighter.se) |
| 19:18.59 | *** join/#debian Stygia (~gmpsaifi@94.191.134.172.bredband.3.dk) |
| 19:19.12 | abrotman | mayhew: they're lucky |
| 19:19.15 | mowgl3y | tvm: http://paste.debian.net/37077/ na man. it doesnt. |
| 19:19.18 | abrotman | or not using it correctly |
| 19:19.27 | mayhew | jelly-home: keep in mind Ubuntu pulls from sid, so it's not *that* unstable unless major changes are happening |
| 19:19.37 | hashmaster1 | ok off to my other issue since wifi seems to be a dead end. Why when i click "power off" it reboots my tower? |
| 19:19.37 | abrotman | mayhew: it doesn't "pull" from sid |
| 19:19.46 | smw | Will jessie have systemd by default? |
| 19:19.51 | abrotman | smw: not likely |
| 19:19.53 | rryoumaa | has been striking out on questions in #debian over the past few days. wonders if there are other debian channels? or is debian-user mailing list the best place to ask questions? or other places? |
| 19:19.55 | guampa | it pulls from testing i think |
| 19:19.56 | tvm | mowgl3y: iwlconfig shows no devices ? |
| 19:19.57 | mayhew | abrotman: ? |
| 19:19.57 | mowgl3y | tvm: should i upgrade the kernel? |
| 19:20.00 | smw | aboman, why not? |
| 19:20.02 | abrotman | smw: it will have it available, but not enabled |
| 19:20.04 | jelly-home | mayhew: ubuntu does a lot of cherry picking, pulling from upstream and about four months of stabilization |
| 19:20.05 | abrotman | mayhew: ! |
| 19:20.16 | abrotman | mayhew: what you said was incorrect |
| 19:20.18 | smw | abrotman, isn't it available in wheezy? |
| 19:20.22 | mayhew | abrotman: how so? |
| 19:20.25 | abrotman | smw: sure, just like in jessie |
| 19:20.27 | mowgl3y | tvm: no wireless extensions |
| 19:20.34 | mowgl3y | tvm: in iwconfig |
| 19:20.36 | abrotman | mayhew: Ubuntu doesn't "pull" from sid |
| 19:20.40 | tvm | mowgl3y: try newer kernel, i'm out of ideas |
| 19:20.40 | smw | abrotman, anyways, why do you think it will be default? |
| 19:20.47 | abrotman | smw: whatever the default is now |
| 19:20.49 | jelly-home | mayhew: they also do not have a rule about basing on "unstable" or "testing"; they have picked both as base in the past |
| 19:21.10 | mayhew | jelly-home: LTS releases are based on testing, non-LTS on sid |
| 19:21.12 | mowgl3y | tvm: i will. i am on debian stable though. it won't mess up anything right? |
| 19:21.15 | smw | aboman, sorry, I meant why do you think it won't be the default* |
| 19:21.19 | guampa | ah, wasn't aware. i always though that ubuntu was based off testing |
| 19:21.22 | abrotman | smw: abro<tab> |
| 19:21.25 | jelly-home | mayhew: nah, that's not strict |
| 19:21.28 | abrotman | smw: why would it be? |
| 19:21.28 | guampa | *t |
| 19:21.44 | abrotman | dpkg: tell smw about systemd |
| 19:21.46 | smw | abrotman, faster boot times? |
| 19:21.48 | *** join/#debian Streusel (~Streusel@S01061859334846a2.vc.shawcable.net) |
| 19:21.48 | *** join/#debian Streusel (~Streusel@unaffiliated/streusel) |
| 19:21.57 | *** join/#debian BenNZ (~Ben__@226.7.252.27.dyn.cust.vf.net.nz) |
| 19:22.05 | abrotman | smw: okay, if you can fix all the issues with it, maybe |
| 19:22.15 | *** join/#debian FilipeMaia (~filipe@h136n4-u-a31.ias.bredband.telia.com) |
| 19:22.17 | smw | abrotman, what issues are there? |
| 19:22.19 | jelly-home | mayhew: in any case, it doesn't say much about feasibility of sid for daily usage |
| 19:22.30 | abrotman | smw: so you haven't actually done research? |
| 19:23.16 | smw | abrotman, my research has more been around what it can do... not what it has problems with :-\ |
| 19:23.27 | mayhew | jelly-home: I agree, Ubuntu non-LTS releases aren't really stable. There are a lot of people using sid for daily usage mainly without issue though. |
| 19:23.31 | smw | abrotman, got a link for me to look at? |
| 19:23.32 | *** join/#debian reavengrey (~reavengre@unaffiliated/reavengrey) |
| 19:23.46 | abrotman | smw: google.com "Debian systemd" |
| 19:23.58 | abrotman | mayhew: see my earlier comments, lucky or using it incorrectly |
| 19:24.10 | *** part/#debian deni (~deni@daenerys.initeq.net) |
| 19:24.12 | abrotman | it's not built for stability |
| 19:24.12 | jelly-home | mayhew: that might just mean they don't upgrade it often enough |
| 19:24.19 | *** part/#debian abyxcos (~abyxcos@mnetic.ch) |
| 19:24.22 | abrotman | or ever |
| 19:24.45 | smw | abrotman, I have done that search. Didn't find reasons not to include it |
| 19:24.49 | *** join/#debian x-treme (~x-treme@unaffiliated/x-treme) |
| 19:25.11 | smw | abrotman, just issues with installing it do to it interfering with sysv |
| 19:25.20 | abrotman | i'm not doing your homework for you .. it's well documented in multiple places |
| 19:25.29 | *** join/#debian fideloper (~fideloper@c-76-28-92-81.hsd1.ct.comcast.net) |
| 19:25.31 | guampa | i don't mind occasional unstability, i trust i can downgrade/pin/keep packages to counter issues |
| 19:25.41 | abrotman | guampa: downgrades may or may not work |
| 19:26.12 | *** join/#debian jehan (~jehan@kiel4-dmz.gis.de) |
| 19:26.20 | *** join/#debian funky (~funky@unaffiliated/funky) |
| 19:26.23 | funky | hi ppl |
| 19:26.34 | guampa | in all, this is a test drive, i'll use it for a while and see how things go |
| 19:26.35 | mowgl3y | tvm: cheers. thanks again man. i will read up a bit before i do the kernel upgrade. |
| 19:26.54 | guampa | so far it's been two months and everything works really good |
| 19:26.56 | funky | does gnome on debian have anything to configure a bit deeper the whole desktop? something like gconf interface or whatever, this interface is extermely limited |
| 19:27.02 | *** join/#debian PhilSliderS (~kvirc@2a01:e35:2f26:89b0:e4d8:1fb4:45e6:72fa) |
| 19:27.12 | guampa | i should add a backup strategy perhaps |
| 19:27.15 | tvm | mowgl3y: you can only install new kernel (find something in backports) and keep the old one too, or you can roll your own from sources |
| 19:27.40 | tvm | mowgl3y: or as i said, find some distro with new kernel, install it onto flash and try booting it, it might be faster |
| 19:28.09 | mowgl3y | tvm: i did try ubuntu 13.04 from usb. i didnt detect the wireless. |
| 19:28.38 | smw | abrotman, btw, I have tried to find information and failed. You haven't given me a single piece of helpful info that I could use to find it |
| 19:28.41 | mayhew | funky: Tweak Tool is probably the best you'll get |
| 19:28.42 | tvm | mowgl3y: i'm not sure what kernel is there ? perhaps try the unloading/loading procedure with the module as shown above and check the dmesg again |
| 19:28.43 | *** join/#debian pauel (~chinaski@g231165180.adsl.alicedsl.de) |
| 19:28.49 | *** part/#debian polaco (~polaco@unaffiliated/polaco) |
| 19:28.53 | *** join/#debian drhouse123 (~drhouse12@2.134.154.171) |
| 19:28.53 | mowgl3y | tvm: i havent done anything with backports before. so it is a bit alien to me. thats why i need to read up a bit. |
| 19:29.14 | funky | mayhew: I'll take a look, thanks |
| 19:29.27 | abrotman | funky: there's also extensions you can add |
| 19:30.04 | mowgl3y | tvm: ubuntu 13.04 has Linux kernel 3.8.8 |
| 19:30.06 | funky | abrotman: which one? |
| 19:30.42 | mowgl3y | tvm: unloading/loading modules. i dunno how to do that. |
| 19:30.43 | funky | ah, you mean shell extension |
| 19:30.45 | funky | I guess |
| 19:31.10 | jelly-home | smw: taken a look at http://bugs.debian.org/systemd yet |
| 19:31.31 | abrotman | funky: yes |
| 19:31.33 | smw | jelly-home, nope, thanks :-) |
| 19:31.39 | abrotman | jelly-home: google is hard |
| 19:31.56 | funky | that's what I used to use on squeezy, since yesterday I'm on wheezy, and this time I wanted to use debian as-is, but this is so limited I think I'll have to swith again to shell ext. or any other desktop |
| 19:32.01 | mowgl3y | tvm: i will have to do a bit of reading before i do it. |
| 19:32.17 | jelly-home | smw: or systemd videos from debconf13 http://meetings-archive.debian.net/pub/debian-meetings/2013/debconf13/webm-high/ |
| 19:32.30 | smw | abrotman, google is easy, knowing what to search is hard. IRC tends to be good for getting those |
| 19:32.36 | mtn | funky: might take a little time to learn it, it might not be as limited as you think |
| 19:32.40 | *** join/#debian bullgard4 (~chatzilla@dslb-088-075-140-193.pools.arcor-ip.net) |
| 19:32.42 | abrotman | it's the first link .. damn lazy people |
| 19:32.44 | tvm | mowgl3y: loading/unloading that's the modprobe -r iwlwifi; modprobe iwlwifi command |
| 19:32.54 | funky | mtn: that's what I'd like to find out |
| 19:33.03 | abrotman | there's an entire wiki page, which includes links to issues and the BTS .. try reading |
| 19:33.18 | smw | abrotman, um, no, the first link for me said nothing bad about systemd |
| 19:33.27 | smw | jelly-home, thanks again |
| 19:33.29 | mtn | funky: if you feel the need to tweak every little thing, gnome is probably not for you. more likely kde |
| 19:33.36 | jelly-home | smw: uh, have you googled for debian systemd |
| 19:33.43 | funky | I'm really open to learn gnome3, but I can't find any tool for setting all the stuff up, besides that minimal configuration menu |
| 19:33.44 | abrotman | https://www.google.com/#q=debian+systemd .. what's the first link ? the wiki |
| 19:33.50 | smw | jelly-home, yeah, got the wiki page |
| 19:33.54 | abrotman | smw: at least pretend you tried |
| 19:33.56 | smw | it talked about how to install it |
| 19:34.02 | jelly-home | smw: and it links to the bts |
| 19:34.04 | abrotman | you didn't read |
| 19:34.15 | smw | it mentioned issues with sysv |
| 19:34.15 | mowgl3y | tvm: oh ok. |
| 19:34.15 | mtn | funky: there are gnome-tweak-tool, gconf-editor and dconf-editor |
| 19:34.23 | abrotman | AND A LINK TO THE BTS |
| 19:34.34 | mowgl3y | tvm: i will do it then with the ubuntu live usb. |
| 19:34.36 | abrotman | read the damn page .. it's not difficult |
| 19:34.45 | smw | ah... that would have been a good link to click... |
| 19:34.52 | abrotman | duh .. |
| 19:34.57 | funky | mtn: I know the gconf-editor, I expected something a bit more user-friendly this time, anyway I'm gonna take a look at that tweak-tool |
| 19:35.03 | trewas | smw: I think the main point against systemd (or upstart for that matter) as default is that without making the chosen init-system the only supported one most of the benefits of those newer initds are wasted |
| 19:35.36 | abrotman | there's also a very long thread about the pros/cons of systemd in Debian |
| 19:35.43 | *** join/#debian Se-bash (~seba@unaffiliated/se-bash) |
| 19:36.09 | *** join/#debian bitwave (~bitwave@c-68-47-12-21.hsd1.ga.comcast.net) |
| 19:36.13 | *** join/#debian vectory (~vectory@unaffiliated/vectory) |
| 19:36.16 | smw | trewas, ah, it would be very difficult to make them backward compatible and use the new features :-\ |
| 19:36.43 | funky | oh that tweak-tool is at least a begining |
| 19:37.14 | smw | trewas, but that type of thinking will just hold back new features... |
| 19:37.17 | smw | shrugs |
| 19:38.19 | *** join/#debian Leryan (~florent@2a01:e35:8a3f:81f0:1a03:73ff:fe61:8f61) |
| 19:38.28 | *** join/#debian JoAkKiNeN (~joakkinen@234.18.165.83.dynamic.mundo-r.com) |
| 19:38.44 | trewas | smw: yeah, but deciding to support only one initd does not happen easily in debian, even more so that there is the choice between systemd and upstart |
| 19:38.48 | *** join/#debian PhilSli7 (~kvirc@2a01:e35:2f26:89b0:8877:2fd8:663c:2036) |
| 19:39.11 | *** join/#debian sferry_ (~samuel@173-23-232-28.client.mchsi.com) |
| 19:39.15 | *** join/#debian Pyrat (~xan@host-2-100-249-94.as13285.net) |
| 19:39.16 | smw | trewas, yeah, I could see that taking 5 years to sort out |
| 19:39.30 | *** join/#debian PhilSli7 (~kvirc@2a01:e35:2f26:89b0:8877:2fd8:663c:2036) |
| 19:39.32 | *** join/#debian na1rb (~nairb@unaffiliated/na1rb) |
| 19:40.41 | *** join/#debian frustrum (~frustrum@ip68-4-122-232.oc.oc.cox.net) |
| 19:41.18 | *** join/#debian m3g9tr0n (~magnum@ppp-94-64-194-118.home.otenet.gr) |
| 19:41.53 | mowgl3y | tvm: brb man i going to boot up ubuntulive and unload/load |
| 19:42.47 | *** part/#debian murmelbahn (~schuschu@212.12.35.45) |
| 19:42.51 | *** join/#debian Avrilanda (~Avrilanda@ip-5-146-129-110.unitymediagroup.de) |
| 19:43.19 | *** part/#debian pauel (~chinaski@g231165180.adsl.alicedsl.de) |
| 19:43.43 | *** join/#debian dansushi (~dan@ool-45755bf2.dyn.optonline.net) |
| 19:45.21 | *** join/#debian Shirakawasuna (~Shirakawa@184-77-202-94.war.clearwire-wmx.net) |
| 19:46.05 | *** join/#debian nighter (nighter@nighter.se) |
| 19:46.46 | *** join/#debian b_52globe (~b_52globe@41.140.3.10) |
| 19:47.34 | *** join/#debian RougeR_ (~RougeR@5.42.129.198) |
| 19:48.50 | *** join/#debian Emmanuel_Chanel (~emmanuel@O090160.ppp.dion.ne.jp) |
| 19:49.14 | *** join/#debian RushNY (~Rush.NY@cpe-74-65-68-95.stny.res.rr.com) |
| 19:49.24 | *** join/#debian sary (~sm1ble@pdpc/supporter/student/sary) |
| 19:49.44 | *** join/#debian hashmaster_ (4407cf57@gateway/web/freenode/ip.68.7.207.87) |
| 19:51.35 | hashmaster_ | how do i determin what kernel i am currently using, trying to see if its the cause of my power off= reboot situation |
| 19:51.57 | tvm | hashmaster_: uname -r |
| 19:52.01 | Pyrat | uname -r |
| 19:52.10 | *** join/#debian kimda (~kim@s55979c2d.adsl.online.nl) |
| 19:52.55 | kimda | hi. I just compiled a driver as a dkms module. After the reboot i see with modinfo the version i build but when i do ethtool -i eth0 i see another driver. Which driver is loaded? |
| 19:53.31 | *** join/#debian ghenry (~ghenry@pdpc/supporter/monthlybyte/ghenry) |
| 19:54.48 | well_laid_lawn | tried looking in lsmod ? |
| 19:54.53 | *** join/#debian franquin (~kenssin@24-226-179-21.al.cgocable.ca) |
| 19:55.09 | abrotman | modinfo? |
| 19:58.00 | *** join/#debian ompaul (~ompaul@unaffiliated/ompaul) |
| 19:58.18 | *** join/#debian FreezingCold (~FreezingC@198-91-168-144.cpe.distributel.net) |
| 19:58.41 | *** join/#debian s0d0 (~john@host81-141-160-27.wlms-broadband.com) |
| 19:59.56 | *** join/#debian Noskcaj (~Noskcaj@ubuntu/member/noskcaj) |
| 20:00.00 | *** mode/#debian [+l 1405] by debhelper |
| 20:00.50 | *** join/#debian Zyferus (~Zyferus@c-24-2-8-110.hsd1.mo.comcast.net) |
| 20:01.22 | Some_Person | I'm trying to figure out the best way for my dad to access the camera system at his work from a Linux box at home. The normal way to access them is through a web interface, but that requires ActiveX. I have figured out how to directly access the MPEG4 stream from each camera, but I need some way to display them. Any ideas? |
| 20:02.02 | Some_Person | I tried using a web page showing all the cameras using the mplayer and vlc browser plugins, but neither one is able to play them all smoothly simultaneously |
| 20:02.24 | *** join/#debian drhouse123 (~drhouse12@2.134.154.171) |
| 20:02.26 | *** join/#debian luser0 (~chatzilla@2602:306:36bb:3d99:21d:72ff:fea4:5b69) |
| 20:02.49 | *** join/#debian franquin (~kenssin@24-226-179-21.al.cgocable.ca) |
| 20:03.09 | Some_Person | There has to be a way to do this |
| 20:03.43 | *** join/#debian drhouse123 (~drhouse12@2.134.154.171) |
| 20:04.22 | abrotman | if it requires activeX, that's what it requires |
| 20:04.41 | abrotman | Some_Person: you've tried vlc and mplayer? |
| 20:05.03 | Some_Person | abrotman: They can both play them fine, but the problem is displaying all 29 video streams simultaneously |
| 20:07.13 | abrotman | Some_Person: and he can't just arrange them ? |
| 20:07.25 | Some_Person | abrotman: How? |
| 20:07.32 | abrotman | with a mouse? |
| 20:07.33 | *** join/#debian kleanchap (~kleanchap@p5DC0FF43.dip0.t-ipconnect.de) |
| 20:07.36 | Some_Person | ??? |
| 20:07.50 | abrotman | open all 29 streams, move them around? |
| 20:08.00 | Some_Person | 29 windows all open at once? |
| 20:08.14 | Some_Person | That doesn't sound like a good solution |
| 20:08.43 | luser0 | windows frames are a problem for garbage collections? |
| 20:09.10 | Some_Person | He'd have to spend like 10 minutes just getting them all positioned each time |
| 20:09.31 | luser0 | what desktop is used? |
| 20:09.40 | *** join/#debian vmlx_ (~vmlx@ool-4352b161.dyn.optonline.net) |
| 20:09.45 | Some_Person | He's using MATE |
| 20:10.04 | *** join/#debian deadalnix_ (~deadalnix@i118-21-142-231.s30.a048.ap.plala.or.jp) |
| 20:10.09 | luser0 | how do you store a workspace in mate with 29 windows open? |
| 20:10.09 | *** join/#debian deadalnix__ (~deadalnix@i118-21-142-231.s30.a048.ap.plala.or.jp) |
| 20:10.50 | Some_Person | I really don't think this is a very good solution |
| 20:10.55 | *** join/#debian lcafiero (~lcafiero@c-50-136-212-63.hsd1.ca.comcast.net) |
| 20:11.16 | *** join/#debian phy1729_ (~phy1729@unaffiliated/phy1729) |
| 20:11.17 | luser0 | no ten minutes; what is this differing from setting positions in a script? |
| 20:11.20 | *** join/#debian Dewio (~dewi@sh.disobedi.net) |
| 20:11.29 | *** join/#debian DustyDingo (~nonamen@atommuell.mum.jku.at) |
| 20:11.38 | *** join/#debian mowgl3y (~cejj@unaffiliated/mowgl3y) |
| 20:11.50 | Some_Person | So you're saying I should make a script that opens 29 copies of mplayer, resizes them, and moves them to the proper positions? |
| 20:12.01 | luser0 | why not? |
| 20:12.05 | *** join/#debian _guitarm1n_ (~guitarman@mail.wootangent.net) |
| 20:12.15 | Some_Person | Wouldn't that require a hell of a lot of RAM? |
| 20:12.22 | *** join/#debian amgarchIn9 (~amgarchin@p4FD63881.dip0.t-ipconnect.de) |
| 20:12.26 | mowgl3y | tvm: paste.debian.net/ 37101, 37105, 37106 |
| 20:12.28 | *** join/#debian nisstyre (~yours@oftn/member/Nisstyre) |
| 20:12.34 | *** join/#debian Bichito- (Bichito@cl.panicbnc.net) |
| 20:12.42 | luser0 | versus what other solution; where is the overhead coming from on your window opens? |
| 20:13.08 | guampa | activex isn't the only way to stream video in web pages |
| 20:13.10 | *** join/#debian antihero_ (~antihero@37.139.5.204) |
| 20:13.20 | *** join/#debian Firartix (artix@unaffiliated/fira) |
| 20:13.21 | Some_Person | I doubt the performance would be much better than when I tried the mplayer and vlc plugins |
| 20:13.24 | *** join/#debian zaq (~dsafds@4206ds4-ryv.0.fullrate.dk) |
| 20:13.35 | *** join/#debian Metavers1 (~Freud@149.210.141.149) |
| 20:13.36 | nisstyre | Hi, I've installed Debian from a usb drive (the dvd version, amd64). I need to get make and gcc installed in order to build my wifi driver (not included in the kernel). What would be the simplest way of doing that? Can I download those as individual .deb files somewhere? |
| 20:13.45 | *** mode/#debian [+l 1397] by debhelper |
| 20:13.46 | *** join/#debian deadalnix (~deadalnix@i118-21-142-231.s30.a048.ap.plala.or.jp) |
| 20:13.47 | well_laid_lawn | each stream will need it's own window, all an app will do is have those windows arranged for you |
| 20:13.48 | abrotman | isn't that what you just said the issue was? |
| 20:13.48 | *** join/#debian Emmanuel_Chanel (~emmanuel@O090160.ppp.dion.ne.jp) |
| 20:13.49 | *** join/#debian Cms-M0ulin (~M0ulin@ANancy-652-1-416-15.w90-6.abo.wanadoo.fr) |
| 20:13.49 | abrotman | Some_Person: you just said that was the issue! what else were you expecting ? |
| 20:13.52 | abrotman | nisstyre: do you have wired internet? |
| 20:13.56 | nisstyre | abrotman: no |
| 20:14.05 | abrotman | not available? or just not currently? |
| 20:14.06 | Some_Person | abrotman: There has to be a better way |
| 20:14.18 | abrotman | Some_Person: kill and open new streams? |
| 20:14.24 | Some_Person | I can't accept that the original ActiveX web interface is the only way to do it |
| 20:14.24 | pirret | there is: install windows.. |
| 20:14.29 | nisstyre | abrotman: I have an ethernet adapter but no way to use wired internet atm |
| 20:14.39 | abrotman | nisstyre: which wifi device is this? |
| 20:14.52 | nisstyre | abrotman: dlink-dwa160, see: http://bernaerts.dyndns.org/linux/74-ubuntu/229-ubuntu-precise-dlink-dwa160-revb2 |
| 20:15.00 | abrotman | nisstyre: if you have the DVD version, the gcc bits should be tehre |
| 20:15.02 | nisstyre | abrotman: I've built it before and the drivers work |
| 20:15.10 | nisstyre | abrotman: what about make? |
| 20:15.14 | abrotman | it'll be there |
| 20:15.15 | nisstyre | it's not installed |
| 20:15.17 | *** join/#debian uuni (~Jellyfish@c-69-136-41-212.hsd1.ga.comcast.net) |
| 20:15.19 | abrotman | it's on the DVD |
| 20:15.31 | nisstyre | oh I get it |
| 20:15.31 | *** join/#debian CowboyNeal (~pater@unaffiliated/cowboyneal) |
| 20:15.33 | pirret | or, install windows on a virtual machine |
| 20:15.39 | nisstyre | so I have to mount the "dvd" in order to install it? |
| 20:15.45 | pirret | windows xp should do fine |
| 20:15.52 | abrotman | nisstyre: those drivers should already be in Debian ? |
| 20:16.01 | nisstyre | abrotman: they aren't in the linux kernel |
| 20:16.02 | *** join/#debian dorito_125 (~dorito_12@108-71-149-228.lightspeed.mmphtn.sbcglobal.net) |
| 20:16.13 | nisstyre | abrotman: there is a similar device that does have drivers in the kernel, but this one is slightly different |
| 20:16.20 | abrotman | nisstyre: i understand that |
| 20:16.34 | *** join/#debian nullby7e (~null@unaffiliated/nullby7e) |
| 20:16.37 | *** join/#debian Arieh_ (sbnc@srver.nl) |
| 20:17.04 | *** join/#debian b_52globe (~b_52globe@105.158.147.2) |
| 20:17.06 | nisstyre | well, I don't think they are in debian yet, but I'd be glad to be proven wrong |
| 20:17.12 | *** join/#debian blackest_mamba (~blackest_@c-50-141-243-243.hsd1.il.comcast.net) |
| 20:17.17 | *** part/#debian luser0 (~chatzilla@2602:306:36bb:3d99:21d:72ff:fea4:5b69) |
| 20:17.24 | abrotman | nisstyre: it's the STA driver? |
| 20:17.46 | *** join/#debian psnider85 (~Snider@80.35.96.58.static.exetel.com.au) |
| 20:17.47 | nisstyre | abrotman: yeah, though I think the naming scheme is messed up, there are a couple revisions |
| 20:17.57 | abrotman | probably |
| 20:18.00 | *** join/#debian Geek_Juice (~Bryanstei@68.67.76.71) |
| 20:18.12 | *** join/#debian vivenzio (~vivenzio@dslb-188-099-206-042.pools.arcor-ip.net) |
| 20:18.48 | elkingrey | Does anybody know of a way to stream SWF 10 without the use of nonfree software? |
| 20:18.52 | nisstyre | way back when I bought this I tried modprobing the STA driver in the kernel and it sort of kinda worked, but it was extremely buggy |
| 20:19.01 | nisstyre | then I found out ralink has a different driver for it |
| 20:19.02 | elkingrey | I've got something I'd really like to watch, and Gnash isn't cutting it. |
| 20:19.06 | abrotman | nisstyre: there is a broadcom-sta-dkms, not sure if it's what you want |
| 20:19.15 | abrotman | elkingrey: lightspark ? |
| 20:19.17 | *** join/#debian s3phir0th115 (~s3phir0th@pool-71-113-22-17.rcmdva.east.verizon.net) |
| 20:19.32 | *** join/#debian azcodex (~azcodex_@4.Red-79-145-49.dynamicIP.rima-tde.net) |
| 20:19.34 | abrotman | nisstyre: anyway, the build-essential stuff will be on DVD1 |
| 20:19.38 | elkingrey | abrotman: I'm pretty sure I've got the newest version of lightspark installed and it still won't help. |
| 20:19.53 | abrotman | swfdec? |
| 20:19.53 | nisstyre | abrotman: ok |
| 20:19.57 | *** join/#debian dnai23 (~daniel@HSI-KBW-091-089-154-223.hsi2.kabel-badenwuerttemberg.de) |
| 20:20.19 | abrotman | nisstyre: there is a broadcom-sta-dkms alrady in Debian, but you'd have to look for the patches you need |
| 20:20.56 | nisstyre | abrotman: yeah I was planning on using dkms once I got it up and running |
| 20:22.18 | hashmaster | Ok, so the box is back in the garage, wifi is connected. iceweasel unable to contact server, pinging my router results in icmp destination host unreachable, only difference now is the location |
| 20:23.06 | *** join/#debian drhouse123 (~drhouse12@2.134.154.171) |
| 20:24.37 | *** join/#debian DocMAX (DocMAX@g231052157.adsl.alicedsl.de) |
| 20:24.40 | *** join/#debian hellspy (~chatzilla@187.120.34.30) |
| 20:27.14 | *** join/#debian zir0faive (~zir0faive@cty37-1-78-214-92-19.fbx.proxad.net) |
| 20:27.32 | grobda24 | Is there a way to have file system access to Cd audio ? I know about cdda:// but applications like Mixxx don't accept the path |
| 20:27.34 | ScarZy | For all my trying - I still don't understand the 'touch' command |
| 20:27.53 | *** join/#debian Shirakawasuna (~Shirakawa@184-77-202-94.war.clearwire-wmx.net) |
| 20:27.58 | *** part/#debian vivenzio (~vivenzio@dslb-188-099-206-042.pools.arcor-ip.net) |
| 20:28.10 | *** join/#debian Lecter (~lecter@ACA3578E.ipt.aol.com) |
| 20:28.17 | *** join/#debian plot (~plot@gw.vpn.autistici.org) |
| 20:30.10 | abrotman | ScarZy: to do what? |
| 20:30.25 | ScarZy | I just dont understand it's usage |
| 20:30.56 | ScarZy | why I need it |
| 20:31.04 | hashmaster | Any suggestions on getiing "power off" to turn off my machine, ive read through http://forums.debian.net/viewtopic.php?f=7&t=86316 nothing is helping and dpkg is giving me error when I try to change my kernel |
| 20:31.08 | zaq | guys - I'm in what feels like a bermuda triangle of debian issues: could there be a link between dbus-xmonad(or any xorg window manager)-wicd(wifi manager)? I woke up to my system not booting, I narrowed down the issue to something between wicd-xsession interaction, but also dbus comes into the scene |
| 20:31.18 | abrotman | ScarZy: okay, then don't use it |
| 20:31.46 | *** join/#debian reavengr1y (~reavengre@unaffiliated/reavengrey) |
| 20:32.25 | Lecter | hello, is there someone who networked with debian-windows machines a bit here? |
| 20:32.33 | armin | with what |
| 20:32.38 | zaq | but can't really wrap my head around it; when xorg doesn't kick me out/freeze - then wifi doesn't connect (wlan0 is there,sees ssid, but can't do anything with any) |
| 20:32.47 | ScarZy | abrotman - I just had to use it again on my fresh install with MPD - but I don't get what it does |
| 20:33.17 | *** join/#debian reavengr2y (~reavengre@unaffiliated/reavengrey) |
| 20:33.45 | armin | ScarZy: it just does what it says: change the file timestamps. |
| 20:33.49 | *** join/#debian mowgl3y_ (~cejj@unaffiliated/mowgl3y) |
| 20:33.55 | armin | ScarZy: or create a file, if it doesn't exist. |
| 20:33.57 | *** join/#debian Mysterytrain (~George@host-44-193-169-209.midco.net) |
| 20:34.12 | mowgl3y_ | tvm: doesn't work man. it keeps asking me for the password. |
| 20:34.39 | tvm | mowgl3y_: but the device is apparently detected |
| 20:34.45 | ScarZy | I guess I'm thinking it should be more elaborate than it really is, armin. Thanks! |
| 20:34.46 | armin | ScarZy: it's often used to create an empty file if it doesn't exist yet in howtos, so that's probably what you stumbled upon. |
| 20:34.52 | mowgl3y_ | tvm: yes i know. |
| 20:34.52 | tvm | mowgl3y_: trying to connec to AP ? |
| 20:34.57 | mowgl3y_ | AP? |
| 20:35.01 | tvm | mowgl3y_: access point |
| 20:35.08 | mowgl3y_ | tvm: yes |
| 20:35.19 | ScarZy | I was just wondering since it's strange there is not file-type that you have to set for mpd (which you can do if preferred by putting the extension) |
| 20:35.22 | tvm | mowgl3y_: well, did you choose right encryption ? |
| 20:35.36 | mowgl3y_ | tvm: yes everything is right. |
| 20:35.36 | *** join/#debian githogori (~githogori@c-50-156-57-127.hsd1.ca.comcast.net) |
| 20:35.50 | mowgl3y_ | tvm: thing is |
| 20:36.18 | *** join/#debian Sambler (~OKASO@unaffiliated/sambler) |
| 20:36.23 | mowgl3y_ | tvm: when i logged into ubuntu. i created a new wifi network. |
| 20:36.39 | mowgl3y_ | tvm: so it was showing me just 1 hidden network |
| 20:36.50 | mowgl3y_ | tvm: no other networks were being shown. |
| 20:37.12 | mowgl3y_ | tvm: now that i am back in debian. it just connected to the AP for like a min. |
| 20:37.28 | mowgl3y_ | tvm: and now its again going on and off. |
| 20:37.30 | *** join/#debian bolt (~r00t@unaffiliated/bolt) |
| 20:37.53 | tvm | mowgl3y_: check the logs of your network manager and you can also check the syslog of the AP |
| 20:37.57 | mowgl3y_ | tvm: keeps asking me for authentication when the same authentication was working before. |
| 20:38.01 | tvm | mowgl3y_: if you have access to it |
| 20:38.28 | mowgl3y_ | tvm: yes i have access. i will check the logs. |
| 20:39.12 | tvm | you might see a reason there, if it's sane AP, some log just client authenticated/deauthenticated |
| 20:39.16 | tvm | and MAC address |
| 20:39.23 | *** join/#debian mambaw (~mambaw@c-50-141-243-243.hsd1.il.comcast.net) |
| 20:39.45 | mowgl3y_ | tvm: now if i reboot debian i am pretty sure it wont detect my wireless. |
| 20:39.58 | mowgl3y_ | hmm |
| 20:40.20 | mowgl3y_ | tvm: are you going to be around for a while? |
| 20:40.27 | tvm | mowgl3y_: it's driver problem, yeah, i'll be around for a bit |
| 20:41.01 | *** join/#debian schreber (~schreber@99-25-238-7.lightspeed.rcsntx.sbcglobal.net) |
| 20:41.24 | mowgl3y_ | tvm: so how to i solve the driver problem. as firmware-iwlwifi is in the kernel? |
| 20:42.05 | *** join/#debian tacpacpoc (~tacpacpoc@chello080109040009.8.14.vie.surfer.at) |
| 20:42.13 | *** join/#debian dawud (~dawud@238.Red-88-14-144.dynamicIP.rima-tde.net) |
| 20:42.23 | *** join/#debian FilipeMaia (~filipe@h136n4-u-a31.ias.bredband.telia.com) |
| 20:42.56 | mowgl3y_ | tvm: just few seconds back it was detecting all the APs but now it can't detect any. |
| 20:43.06 | hashmaster | Anyone ideas on the power off issue |
| 20:43.35 | mowgl3y_ | tvm: anyways i have to go now. if you could leave me a few pointers on how to solve the driver problem that would be great. |
| 20:43.42 | tacpacpoc | the best game REAL GOLD : http://www.goldentowns.com?i=7386 |
| 20:43.57 | tvm | mowgl3y_: firmware-iwlwifi is just closed source part of the driver |
| 20:44.04 | tvm | mowgl3y_: second part is in kernel |
| 20:44.31 | tvm | mowgl3y_: try to find backported kernel for wheezy and install it, it might be simple as that |
| 20:45.00 | mowgl3y_ | tvm: i see. alright mate. cool. thanks a lot for your help. really really appreciated. |
| 20:45.13 | mowgl3y_ | tvm: i gotta go now. catch you around tomorrow. |
| 20:45.45 | mowgl3y_ | tvm: ill keep you posted how this goes along. |
| 20:45.55 | mowgl3y_ | tvm: bbye. cheers again :) |
| 20:46.01 | *** join/#debian Pengoo (~Pengoo@S0106602ad0726c1f.vf.shawcable.net) |
| 20:49.45 | abrotman | win 6 |
| 20:49.54 | *** join/#debian nisstyre (~yours@oftn/member/Nisstyre) |
| 20:50.00 | *** mode/#debian [+l 1391] by debhelper |
| 20:50.14 | *** join/#debian Berry6510 (~Berry@5356AEE3.cm-6-7c.dynamic.ziggo.nl) |
| 20:50.51 | hashmaster | Yay internet issue inthe gatage fixed. Apparently my table might have been acting as a faraday cage, but I could still connect to my network. |
| 20:51.28 | *** join/#debian fideloper (~fideloper@c-76-28-92-81.hsd1.ct.comcast.net) |
| 20:51.39 | *** join/#debian [1]Avrilanda (~Avrilanda@ip-5-146-129-110.unitymediagroup.de) |
| 20:51.59 | *** join/#debian xingu (~xingu@cl-1734.lon-02.gb.sixxs.net) |
| 20:52.09 | *** join/#debian Fritte (~arved@p4FF74C61.dip0.t-ipconnect.de) |
| 20:52.24 | *** join/#debian fedesilva (~fedesilva@r190-135-78-35.dialup.adsl.anteldata.net.uy) |
| 20:52.29 | hashmaster | Now I need to fix my power issue |
| 20:53.41 | *** join/#debian BenNZ (~Ben__@226.7.252.27.dyn.cust.vf.net.nz) |
| 20:54.35 | *** join/#debian HisaoNakai (~HisaoNaka@unaffiliated/contrapunctus) |
| 20:54.47 | *** part/#debian HisaoNakai (~HisaoNaka@unaffiliated/contrapunctus) |
| 20:54.56 | *** join/#debian happyworld (~happyworl@g226075019.adsl.alicedsl.de) |
| 20:55.10 | *** join/#debian Carlitos__ (be514cbb@gateway/web/freenode/ip.190.81.76.187) |
| 20:55.17 | Carlitos__ | hola a todos |
| 20:55.21 | Carlitos__ | como estan? |
| 20:56.21 | Carlitos__ | please somebody can tell me how can i set up a C-Media Electronics, Inc. CM106 Like Sound Device ? because the sound is with a noise |
| 20:56.29 | Carlitos__ | I would like to fix it |
| 20:56.58 | *** join/#debian c0mrade_ (c0mrade@unaffiliated/c0mrade/x-3310965) |
| 20:57.04 | c0mrade_ | WriteLn.Console("Hello"); |
| 20:57.16 | c0mrade_ | Where can I dowload a stage 1 gentoo tar? |
| 20:57.29 | *** join/#debian HelenaKitty (~s98259@97e716f0.skybroadband.com) |
| 20:57.43 | somiaj | c0mrade_: might want to ask in #gentoo, this is #debian |
| 20:58.01 | *** join/#debian drhouse123 (~drhouse12@2.134.154.171) |
| 20:58.53 | *** join/#debian DemonJester (~DemonJest@fedora/DemonJester) |
| 20:58.56 | *** join/#debian |oop (~pool@c-68-81-109-22.hsd1.pa.comcast.net) |
| 20:59.12 | bolt | on a computer with two interfaces, both of which can access the internet, how do i set the primary one to use for resolv.conf nameservers and default route? |
| 21:00.46 | hashmaster | Anyone know how to fix the power off issue, everytime I click power off it just reboots |
| 21:00.53 | elkingrey | I'm looking to find the browser-plugin-lightspark tarball so I can compile from source. Can't find it, but it must exist. Can anybody help me? |
| 21:01.08 | *** join/#debian Olanzapin (~suck@c83-191-65-236.cust.tele2.se) |
| 21:01.12 | *** join/#debian Seryth (~Matrix@cpc5-nail3-2-0-cust910.aztw.cable.virginmedia.com) |
| 21:01.12 | *** join/#debian Seryth (~Matrix@unaffiliated/mang0) |
| 21:02.27 | *** join/#debian badass (~badass@unaffiliated/badass) |
| 21:03.30 | *** join/#debian TheCoffeMaker (~TheCoffeM@unaffiliated/thecoffemaker) |
| 21:03.34 | *** join/#debian testingsomething (44058fab@gateway/web/freenode/ip.68.5.143.171) |
| 21:04.10 | *** join/#debian c0mrade__ (c0mrade@93.126.201.100) |
| 21:04.42 | *** part/#debian testingsomething (44058fab@gateway/web/freenode/ip.68.5.143.171) |
| 21:05.02 | *** part/#debian Fritte (~arved@p4FF74C61.dip0.t-ipconnect.de) |
| 21:05.18 | *** join/#debian lab (4407cf57@gateway/web/freenode/ip.68.7.207.87) |
| 21:05.40 | lab | yo |
| 21:06.48 | lab | i got an issue with my computer. i cant turn it off. it just keeps rebooting |
| 21:07.43 | *** join/#debian ShaneCurran (~shane@89.100.110.32) |
| 21:07.43 | *** join/#debian ShaneCurran (~shane@orchestra/user/TechieShane) |
| 21:08.26 | *** join/#debian knf (~KeyboardN@unaffiliated/keyboardnotfound) |
| 21:08.33 | knf | how in panel to show all actives windows ? |
| 21:08.39 | knf | and minimized not only one |
| 21:08.39 | *** join/#debian berarma (~bernat@141.Red-88-15-53.dynamicIP.rima-tde.net) |
| 21:09.34 | *** join/#debian format_c (~format_c@2001:4dd0:ff00:8421:6e62:6dff:fe4a:e47d) |
| 21:10.40 | *** join/#debian s3phir0th115 (~s3phir0th@pool-71-113-22-17.rcmdva.east.verizon.net) |
| 21:10.41 | *** join/#debian hashashin (~hashashin@unaffiliated/hashashin) |
| 21:10.47 | *** join/#debian Fritte (~arved@p4FF74C61.dip0.t-ipconnect.de) |
| 21:10.55 | lab | anyone thought or ideas on how to turn my computer off |
| 21:11.26 | *** join/#debian drhouse123 (~drhouse12@2.134.154.171) |
| 21:12.16 | lab | aside from holding the power button or pulling the plug |
| 21:14.07 | *** join/#debian vxxr9 (~maxiu@c-50-139-56-146.hsd1.or.comcast.net) |
| 21:15.03 | *** join/#debian lightcap (~lightcap@218.b161.bendtel.net) |
| 21:15.24 | *** join/#debian drhouse123 (~drhouse12@2.134.154.171) |
| 21:16.39 | knf | i missing the firmware for my wireless adapter, how to install it ? |
| 21:16.45 | *** join/#debian frustrum (~frustrum@ip68-4-122-232.oc.oc.cox.net) |
| 21:17.34 | *** join/#debian LordShiva (~shiva@gateway/tor-sasl/lordshiva) |
| 21:18.00 | hashmaster | Knf did u install with the non free firmware disk or the regular disk? |
| 21:18.16 | knf | regular disk |
| 21:18.25 | knf | can i install the firmware without reinstalling debian ? |
| 21:18.25 | *** join/#debian shardz (~recfor@173-166-112-249-newengland.hfc.comcastbusiness.net) |
| 21:19.03 | hashmaster | I couldnot get the wireless firmware to load via the regular install, had to go back with the n8n free disk and reindtall |
| 21:19.26 | shardz | The installer has failed on "Select and install software" twice now and offers 0 explanation as to why. |
| 21:20.49 | hashmaster | Kns: Non free firmware installed really quick, are currently installi g now? |
| 21:20.50 | *** join/#debian msl09 (~marcelo@189-105-10-211.user.veloxzone.com.br) |
| 21:21.45 | *** join/#debian koshie (~koshie@ks3291815.kimsufi.com) |
| 21:22.45 | *** join/#debian tekkbuzz (~oijvlj@unaffiliated/tekkbuzz) |
| 21:23.03 | *** join/#debian ghostlines (~ghost@92.109.90.61) |
| 21:23.37 | *** join/#debian ledestin (~ledestin@119.224.34.17) |
| 21:24.12 | *** join/#debian mczhb (~mczhb@p4FF9B72D.dip0.t-ipconnect.de) |
| 21:25.07 | *** join/#debian RafaelK (~RafaelK@dslb-088-069-141-040.pools.arcor-ip.net) |
| 21:25.20 | RafaelK | hello folks |
| 21:25.37 | hashmaster | Hi |
| 21:25.42 | Olanzapin | is away -( bbl )- at 11:25p -( P:On / L:On )- |
| 21:28.02 | bolt | how can I get dhclient to not update resolv.conf for eth1, only for eth0? they're both on dhcp |
| 21:28.11 | *** join/#debian guk (~chris@spaceheater.solosoft.ca) |
| 21:28.57 | *** join/#debian bariumbitmap (~nbeaver@108-241-79-18.lightspeed.cicril.sbcglobal.net) |
| 21:29.05 | hashmaster | kns: try this about 4th post down |
| 21:29.26 | hashmaster | kns: http://forums.debian.net/viewtopic.php?f=17&t=73204 forgot the link |
| 21:29.40 | *** join/#debian FilipeMaia (~filipe@h136n4-u-a31.ias.bredband.telia.com) |
| 21:30.11 | *** join/#debian ayansa (ayansa@141.136.87.32) |
| 21:30.12 | *** join/#debian c0mrade__ (c0mrade@unaffiliated/c0mrade/x-1816193) |
| 21:30.28 | *** part/#debian ayansa (ayansa@141.136.87.32) |
| 21:30.52 | *** join/#debian tormen__ (~me@no-panic.eu) |
| 21:30.58 | *** join/#debian optimusprimem (~globo_com@177.53.180.133) |
| 21:30.58 | *** join/#debian optimusprimem (~globo_com@unaffiliated/optimusprimem) |
| 21:32.11 | babilen | shardz: Check on tty4 (alt-f4) for errors |
| 21:32.54 | shardz | Apparently 4GB is not enough for root. |
| 21:33.09 | shardz | (It's an eeepc.) |
| 21:34.01 | babilen | depends on what you install, but yeah |
| 21:34.29 | hashmaster | Still cant figure this power off issue |
| 21:34.39 | shardz | The graphical package has a lot of stuff in it, apparently. |
| 21:34.45 | babilen | shardz: See http://www.debian.org/releases/stable/amd64/apds02.html.en |
| 21:35.09 | *** part/#debian amkamk (~amk@5.178.64.237) |
| 21:35.26 | *** join/#debian RougeR (~RougeR@5.42.129.198) |
| 21:35.27 | *** join/#debian RougeR (~RougeR@unaffiliated/rouger) |
| 21:41.31 | *** join/#debian RougeR_ (~RougeR@5.42.129.198) |
| 21:43.04 | cusco | hi |
| 21:43.11 | poorrick | Ok, I put sid in my sources.list for a little while to install a single package. I accidentally did apt-get upgrade, but stopped it in the middle of the download because I realized it was pulling from sid. Now I can't install any i386 libraries because of broken packages. Can anyone help me? |
| 21:43.23 | cusco | I connected a composite cable to the tv, xrandr show as S-Video |
| 21:43.40 | cusco | grub shows fine, but X shows all greem and garbled |
| 21:43.44 | cusco | what can I do? |
| 21:44.07 | *** join/#debian tranceNRG (~tranceNRG@unaffiliated/trancenrg) |
| 21:44.16 | poorrick | Running wheezy amd64 with i386 in the architecture list btw |
| 21:44.21 | berarma | poorrick: that was a very bad idea |
| 21:45.11 | *** join/#debian slv (~silvermec@209-6-52-182.c3-0.smr-ubr1.sbo-smr.ma.cable.rcn.com) |
| 21:45.46 | *** join/#debian Olanzapine (~suck@c83-191-65-236.cust.tele2.se) |
| 21:46.05 | *** join/#debian MaddinXx (~racksteri@zux221-153-203.adsl.green.ch) |
| 21:46.29 | *** part/#debian c0mrade__ (c0mrade@unaffiliated/c0mrade/x-1816193) |
| 21:47.14 | *** join/#debian glebihan_ (~glebihan@unaffiliated/glebihan) |
| 21:47.40 | poorrick | berarma: Duh. I can't remember what it was, but I don't do stuff like that unless i really really really really really really really really really really really really really really really really really really really really really really mean it |
| 21:48.32 | poorrick | Other packages install perfectly fine, though, so I thought it might be salvagable |
| 21:49.03 | *** join/#debian amgarchIn9 (~amgarchin@p4FD63881.dip0.t-ipconnect.de) |
| 21:49.06 | hashmaster | So power off reboots my computer instead of turning it off any ideas |
| 21:49.53 | *** join/#debian ajb (~albert@pool-71-255-87-104.nwrknj.east.verizon.net) |
| 21:49.57 | gnarface | poorrick: all you can do now other than restore from backup is complete the upgrade and hope for the best. its highly unlikely you'll be able to find one of the handful of people who knows how to undo what you've done manually, much less afford their time, and there is no supported way to downgrade either, i'm sorry :-/ |
| 21:50.41 | gnarface | poorrick: in the future, instead of mixing distros (which was your first and primary mistake) use backports |
| 21:50.53 | *** join/#debian mtn (~mtn@174.32.161.70) |
| 21:50.59 | *** join/#debian Aramur (~arare@28.Red-81-32-228.dynamicIP.rima-tde.net) |
| 21:51.00 | zaq | <PROTECTED> |
| 21:51.57 | poorrick | gnarface: The presence of the backports in the sources-list when i got in there suggested that it wasn't in there either. I remember the sid repo making it ridictulously easier |
| 21:52.21 | poorrick | zaq: I have no idea what that is, so maybe? |
| 21:52.46 | gnarface | poorrick: follow the bot factlet tree - there is instructions on how to make your own backport from sid. just because its not in the repo doesn't mean you grab the sid version; that just breaks shit unecessarily |
| 21:52.51 | *** part/#debian RafaelK (~RafaelK@dslb-088-069-141-040.pools.arcor-ip.net) |
| 21:53.21 | poorrick | gnarface: Well now I know, thanks |
| 21:53.37 | zaq | poorrick, don't count that I;d know how to help you; but I have i386 sources in my amd64 debian sid - I followed a guide on how to add skype packages to make it work on amd64 |
| 21:53.52 | *** join/#debian ledestin (~ledestin@119.224.34.17) |
| 21:53.55 | gnarface | poorrick: specifically i think you want to ask the bot about "ssb" but it also has some other info in there you should really read too probably |
| 21:53.57 | zaq | and they don;t go into my way at all, |
| 21:54.41 | gnarface | poorrick: if the package you backport depends on other sid packages, you may have to repeat the instructions on each of them, backporting the lot - before you can even install it |
| 21:54.55 | poorrick | fair enough. |
| 21:55.19 | gnarface | its a slippery slope... |
| 21:55.29 | *** join/#debian bitwave (~bitwave@c-68-47-12-21.hsd1.ga.comcast.net) |
| 21:56.02 | cusco | I'm not sure if it is the refresh rate |
| 21:56.02 | gnarface | personally, when i have to backport more than 20-30 packages to get something from unstable, i just prefer to run unstable instead |
| 21:56.09 | cusco | I tried changing it... |
| 21:56.22 | *** join/#debian merica (~merica@anon-36-236.vpn.ipredator.se) |
| 21:56.47 | gnarface | if you only have to backport 10-15 packages, or less, i'd say go for it |
| 21:57.08 | *** join/#debian FilipeMaia_ (~filipe@h136n4-u-a31.ias.bredband.telia.com) |
| 21:57.30 | poorrick | Is there any way to figure out what's from sid and gut it out? |
| 21:58.24 | poorrick | I'm not opposed to gruelling processes, I don't want to redo all my services, i just got them finished T.T |
| 21:58.24 | *** join/#debian KeyboardNotFound (~KeyboardN@unaffiliated/keyboardnotfound) |
| 21:58.25 | *** join/#debian Pengoo (~Pengoo@S0106602ad0726c1f.vf.shawcable.net) |
| 21:58.48 | KeyboardNotFound | how i can edit the toolbar on top of monitor ? |
| 21:58.53 | *** join/#debian Yoshi11 (~yoshi@dsl-207-112-45-241.tor.primus.ca) |
| 21:59.15 | *** join/#debian karlpinc` (~user@meme-net.meme.com) |
| 22:00.46 | *** join/#debian mikel888 (~chatzilla@p4FE13E07.dip0.t-ipconnect.de) |
| 22:00.49 | *** join/#debian weeb1e_ (~quassel@41.86.98.15) |
| 22:01.34 | zaq | guys, I've been fighting this for hours today; I believe that an issue with dbus is making my wm crash right upon launching. I believe it's dbus, as at the same time wifi authentication stopped working in wicd |
| 22:01.36 | *** join/#debian BiGBOi_ (~michael@174.143.128.166) |
| 22:01.55 | zaq | I just did a dist-upgrade on my debian sid, to no avail |
| 22:02.02 | *** join/#debian _darxun (darxun@has.never.ever.been.afraid.org) |
| 22:02.57 | zaq | the most peculiar thing is that when I run it the usual way, my wm crashes (xmonad); when I go through rescue mode, the switch user to the usual one, xmonad runs normally, but wicd doens't work because of missing dbus socket |
| 22:03.24 | poorrick | ARRRIGHT |
| 22:03.26 | KeyboardNotFound | how i can edit the toolbar on top of monitor ? |
| 22:03.30 | poorrick | muthaeffert |
| 22:03.44 | poorrick | 3 days on and off and i goddit |
| 22:03.52 | zaq | poorrick, how? |
| 22:04.09 | *** join/#debian _0bitcount (~bitcount@81.61.208.23.dyn.user.ono.com) |
| 22:04.32 | poorrick | zaq: preferences file in /etc/apt that adds pin-priority |
| 22:04.41 | zaq | thats what I meant! |
| 22:04.42 | *** join/#debian scoopex_ (~scoopex@85.214.140.184) |
| 22:04.48 | zaq | sorry I couldn't explain it better |
| 22:04.55 | poorrick | Ok, yeah |
| 22:04.58 | *** join/#debian JengYiC (~jengyic@mail.daemonland.org) |
| 22:05.08 | *** join/#debian Webchef (~Webchef@p579C8CDB.dip0.t-ipconnect.de) |
| 22:05.11 | poorrick | But i'd seen it around, and the pin-priority was set to 2012 in those |
| 22:05.27 | poorrick | I bring it down to 1001 according to one tutorial and it downgrades 3 font packages |
| 22:05.50 | *** join/#debian nosuid (~nosuid@unaffiliated/nosuid) |
| 22:05.59 | poorrick | arrighty, thanks for your attention gaiz |
| 22:06.04 | *** join/#debian Freeaqingme_ (~Freeaqing@91.214.168.110) |
| 22:06.05 | *** join/#debian weltzooo (~weltzooo@ec2-54-241-122-161.us-west-1.compute.amazonaws.com) |
| 22:06.15 | *** join/#debian copec_ (copec@schrodbox.unaen.org) |
| 22:06.19 | *** join/#debian xorpp (~xorp@ec2-50-16-219-79.compute-1.amazonaws.com) |
| 22:08.06 | *** join/#debian Will| (~wrboyce@88.198.95.211) |
| 22:08.16 | *** join/#debian ikonia (~irc@unaffiliated/ikonia) |
| 22:08.36 | *** join/#debian luckman212 (~luckman21@unaffiliated/luckman212) |
| 22:08.37 | *** join/#debian kermit (unknown@pdpc/supporter/bronze/kermit) |
| 22:09.07 | *** join/#debian weltzooo (~weltzooo@ec2-54-241-122-161.us-west-1.compute.amazonaws.com) |
| 22:09.34 | *** join/#debian paddymahoney (~paddymaho@24.137.221.230) |
| 22:10.26 | *** join/#debian zw01 (~zev@107-199-61-12.lightspeed.sntcca.sbcglobal.net) |
| 22:10.29 | *** join/#debian Naoy (~Yoan@backtrack.naoy.fr) |
| 22:10.59 | *** join/#debian daniel-s_ (~daniel-s@2001:388:608c:4c40:f9d8:3bf9:361a:1c6f) |
| 22:11.01 | poorrick | And now to play dwarf fortress over ssh |
| 22:11.03 | poorrick | Good day! |
| 22:11.40 | *** join/#debian Roland- (Roland-@79.119.105.107) |
| 22:11.46 | *** join/#debian Roland- (Roland-@unaffiliated/roland-) |
| 22:11.56 | *** join/#debian optimusprimem (~globo_com@177.53.180.133) |
| 22:11.56 | *** join/#debian CowboyNeal (~pater@76-198-41-113.lightspeed.clmboh.sbcglobal.net) |
| 22:11.56 | *** join/#debian Yong (Yong11@77.66.14.254) |
| 22:11.56 | *** join/#debian ag4ve (~ag4ve@96.26.67.194) |
| 22:12.22 | cusco | .test |
| 22:12.27 | cusco | ,test |
| 22:12.37 | cusco | what is dpkg replacement? |
| 22:12.43 | *** join/#debian spade (~rheturd@109.201.152.228) |
| 22:12.43 | *** join/#debian caf (caf@bitchx/dev/caf) |
| 22:12.43 | *** join/#debian Coburn (~coburn@2607:ff68:100:24:1::3f) |
| 22:12.43 | *** join/#debian jannic (~jan@volga.hitnet.rwth-aachen.de) |
| 22:12.43 | *** join/#debian useall (~lb@2001:0:53aa:64c:c34:2e3f:d1b6:6966) |
| 22:12.43 | *** join/#debian karupanerura (~karupaner@www13355ui.sakura.ne.jp) |
| 22:12.43 | *** join/#debian civillian (~nick@174.202.49.122-static.velocitynet.com.au) |
| 22:12.43 | *** join/#debian Tabmow (~tabmow@freenode/staff/tabmow) |
| 22:12.43 | *** join/#debian MaXim_ (~SSL88@ec2-54-252-42-234.ap-southeast-2.compute.amazonaws.com) |
| 22:13.13 | cusco | Ã/w dpkg |
| 22:13.24 | babilen | cusco: Can we help you? |
| 22:13.46 | cusco | well |
| 22:13.48 | cusco | sure |
| 22:14.02 | cusco | I connected tv to svideo from gfx card |
| 22:14.07 | *** join/#debian reavengrey (~reavengre@unaffiliated/reavengrey) |
| 22:14.14 | cusco | grub shows fine, untill the (dkms?) kicks in? |
| 22:14.19 | *** join/#debian CowboyNeal (~pater@unaffiliated/cowboyneal) |
| 22:14.23 | *** join/#debian mathisen (~mathisen@89.221.247.142) |
| 22:14.24 | cusco | when booting the letters show slightly smaller |
| 22:14.31 | cusco | and the screen gets green |
| 22:14.36 | cusco | and a bit garbled |
| 22:14.43 | cusco | I tried playing with xrandr |
| 22:14.53 | cusco | setting different refresh rate and all... |
| 22:14.59 | cusco | I am just clueless |
| 22:15.11 | *** join/#debian koroshiya (~koroshiya@94.102.51.133) |
| 22:15.47 | KeyboardNotFound | HOW I CAN EDIT THE TOOLBAR ON TOP OF MONITOR ? |
| 22:16.18 | rog1121 | KeyboardNotFound, by turning off caps lock |
| 22:16.55 | rog1121 | KeyboardNotFound, also that depends on the DWM you're using |
| 22:17.09 | *** join/#debian Adran (adran@botters/staff/adran) |
| 22:17.59 | KeyboardNotFound | rog1121, i dont which dwm i use |
| 22:18.07 | *** join/#debian lightcap (~lightcap@208.100.164.50) |
| 22:18.11 | rog1121 | KeyboardNotFound, which version of debian did you download |
| 22:18.17 | cusco | I guess I wanted to disable dkms |
| 22:18.22 | cusco | temporarely |
| 22:18.29 | *** join/#debian miniyo (~amospalla@amospalla.es) |
| 22:18.29 | *** join/#debian ivan`` (~ivan@li125-242.members.linode.com) |
| 22:18.29 | *** join/#debian Rn0` (~Rn0@88.191.134.175) |
| 22:18.29 | *** join/#debian flan_ (~flan@23.17.143.186) |
| 22:18.29 | *** join/#debian bitwave (~bitwave@c-68-47-12-21.hsd1.ga.comcast.net) |
| 22:18.29 | *** join/#debian berarma (~bernat@141.Red-88-15-53.dynamicIP.rima-tde.net) |
| 22:18.29 | *** join/#debian Seryth (~Matrix@unaffiliated/mang0) |
| 22:18.29 | *** join/#debian HelenaKitty (~s98259@97e716f0.skybroadband.com) |
| 22:18.29 | *** join/#debian schreber (~schreber@99-25-238-7.lightspeed.rcsntx.sbcglobal.net) |
| 22:18.29 | *** join/#debian bolt (~r00t@unaffiliated/bolt) |
| 22:18.29 | *** join/#debian franquin (~kenssin@24-226-179-21.al.cgocable.ca) |
| 22:18.29 | *** join/#debian vectory (~vectory@unaffiliated/vectory) |
| 22:18.29 | *** join/#debian Se-bash (~seba@unaffiliated/se-bash) |
| 22:18.29 | *** join/#debian jehan (~jehan@kiel4-dmz.gis.de) |
| 22:18.29 | *** join/#debian mentor (~mentor@unaffiliated/mentor) |
| 22:18.29 | *** join/#debian waka (~wakariera@unaffiliated/waka) |
| 22:18.29 | *** join/#debian Chetic (~Chetic@c83-250-75-148.bredband.comhem.se) |
| 22:18.29 | *** join/#debian Konrad127123 (~konrad@bband-dyn76.178-40-79.t-com.sk) |
| 22:18.29 | *** join/#debian MekkaGodzilla (~MekkaGodz@cxr69-3-82-224-150-128.fbx.proxad.net) |
| 22:18.29 | *** join/#debian Selveste1 (~hds@31.25.23.230) |
| 22:18.29 | *** join/#debian chrisss404 (~chrisss40@85-127-252-172.dynamic.xdsl-line.inode.at) |
| 22:18.29 | *** join/#debian gnuweb (~j@cpe-75-84-117-60.socal.res.rr.com) |
| 22:18.29 | *** join/#debian p0g0 (~pogo@unaffiliated/p0g0) |
| 22:18.29 | *** join/#debian raSter^ (raster@gateway/shell/elitebnc/x-tulruvavdvsbhpsq) |
| 22:18.29 | *** join/#debian kdox- (Elite6019@gateway/shell/elitebnc/x-xwbowbcjgntxwtfc) |
| 22:18.29 | *** join/#debian unixninja92 (~unixninja@c-46-162-92-126.cust.bredband2.com) |
| 22:18.29 | *** join/#debian kain88 (~kain88@kel30.kel.studentenwerk-goettingen.de) |
| 22:18.30 | *** join/#debian kriger (~norge@71-90-14-51.dhcp.ftbg.wi.charter.com) |
| 22:18.30 | *** join/#debian dreamon (~dreamon@unaffiliated/dreamon) |
| 22:18.30 | *** join/#debian arare (~Aramur@153.68.117.91.dynamic.mundo-r.com) |
| 22:18.30 | *** join/#debian mirak (~mirak@static-176-182-51-103.ncc.abo.bbox.fr) |
| 22:18.30 | *** join/#debian Amandil (~Amandil@gw3.tacwap.org) |
| 22:18.30 | *** join/#debian RA3OR (~demon@unaffiliated/ra3or) |
| 22:18.30 | *** join/#debian lulz0r (~lulz0r@aftr-37-24-146-62.unity-media.net) |
| 22:18.30 | *** join/#debian PcJamesy (~James@unaffiliated/pcjamesy) |
| 22:18.30 | *** join/#debian schlarpc (~schlarpc@cpe-098-026-019-153.nc.res.rr.com) |
| 22:18.30 | *** join/#debian Walzmy_ (~quassel@71.28.175.64) |
| 22:18.30 | *** join/#debian holmgren (magnus@h-79-68.a163.priv.bahnhof.se) |
| 22:18.30 | *** join/#debian Rest_In_Peace (~UPP@76-225-50-216.lightspeed.bkfdca.sbcglobal.net) |
| 22:18.30 | *** join/#debian aegis (~aegis@184.75.214.82) |
| 22:18.30 | *** join/#debian djace (~djace@unaffiliated/djace) |
| 22:18.30 | *** join/#debian zagabar (~zagabar@unaffiliated/zagabar) |
| 22:18.30 | *** join/#debian ScarZy (~ScarZy@87.117.225.186) |
| 22:18.30 | *** join/#debian on1ald (~ben@178-117-90-253.access.telenet.be) |
| 22:18.30 | *** join/#debian k4tfish (~k4t@web.reniced.net) |
| 22:18.30 | *** join/#debian Bomfunk (f00b47@last.fm/user/MrBomfunk) |
| 22:18.30 | *** join/#debian pingveno (adevore@rita.cat.pdx.edu) |
| 22:18.30 | *** join/#debian cybrNaut (cybrNaut@unaffiliated/cybrnaut) |
| 22:18.30 | *** join/#debian mephx (~mephx@newton.ist.utl.pt) |
| 22:18.30 | *** join/#debian steff (~steff@d40aab56.rev.stofanet.dk) |
| 22:18.30 | *** join/#debian voxadam (voxadam@unaffiliated/voxadam) |
| 22:18.30 | *** join/#debian George_OConnor (~goconnor@goconnor-mp.just1.com) |
| 22:18.30 | *** join/#debian pbxbrian (~pbxbrian@unaffiliated/brian98) |
| 22:18.30 | *** join/#debian cstdio (thomasross@i.am.th0masr0ss.com) |
| 22:18.31 | *** join/#debian Utility (thomasross@i.am.th0masr0ss.com) |
| 22:18.31 | *** join/#debian grim4593 (~grim4593@76-227-191-23.lightspeed.livnmi.sbcglobal.net) |
| 22:18.31 | *** join/#debian Obi-Wan (~obifn@unaffiliated/obi-wan) |
| 22:18.31 | *** join/#debian Aha2Y (~Shiny@unaffiliated/aha2y) |
| 22:18.31 | *** join/#debian Hexeon (kvirc@unaffiliated/hexeon) |
| 22:18.31 | *** join/#debian blz37 (~minsa@c-24-130-180-195.hsd1.ca.comcast.net) |
| 22:18.31 | *** join/#debian luese (~luese@HSI-KBW-078-043-097-091.hsi4.kabel-badenwuerttemberg.de) |
| 22:18.31 | *** join/#debian surfdue (surfdue@unaffiliated/surfdue) |
| 22:18.31 | *** join/#debian eAndrius (~andrew@motoko.sutas.eu) |
| 22:18.31 | *** join/#debian gernot (~gernot@unaffiliated/gernot) |
| 22:18.31 | *** join/#debian elik (~elik@unaffiliated/elik) |
| 22:18.31 | *** join/#debian emilsedgh (~emilsedgh@kde/developer/esedgh) |
| 22:18.31 | *** join/#debian darkc0met (darkcomet@gateway/shell/trekweb.org/x-zgubxaoiuxpxkbcz) |
| 22:18.31 | *** join/#debian lapache (~jon@unaffiliated/lapache) |
| 22:18.31 | *** join/#debian wolrah (~wolrah@24.239.210.140) |
| 22:18.31 | *** join/#debian dflurker (~dimon@metaportal.ru) |
| 22:18.31 | *** join/#debian HardDisk_WP (~marco@wikipedia/harddisk) |
| 22:18.31 | *** join/#debian _br_ (~bjoern_fr@213-239-215-232.clients.your-server.de) |
| 22:18.31 | *** join/#debian bucketm0use (~bucketmou@unaffiliated/bucketm0use) |
| 22:18.31 | *** join/#debian folivora (~out@46.19.34.64) |
| 22:18.31 | *** join/#debian ozzloy (~ozzloy@unaffiliated/ozzloy) |
| 22:18.37 | *** join/#debian sferry (~samuel@143.226.94.218) |
| 22:18.37 | *** join/#debian vt0r (ZNC@nbg1.shellvatore.us) |
| 22:18.37 | *** join/#debian tabris|a1ay (~northman@174.84.219.181) |
| 22:18.37 | *** join/#debian detha (~detha@196.41.3.190) |
| 22:18.37 | *** join/#debian benf (benf2004@unaffiliated/benf2004) |
| 22:18.37 | *** join/#debian jwash (~jwash@173.13.186.66) |
| 22:18.37 | *** join/#debian mumixam (~m@unaffiliated/mumixam) |
| 22:18.37 | *** join/#debian bfortified (~bfortifie@unaffiliated/bfortified) |
| 22:18.37 | *** join/#debian Neal__ (neal@felix.ineal.me) |
| 22:18.37 | *** join/#debian OALM (~OALM@r200-40-210-130.static.adinet.com.uy) |
| 22:18.37 | *** join/#debian xdr_ (~xdr@h9n5-aahm-a11.ias.bredband.telia.com) |
| 22:18.37 | *** join/#debian dimir (~dimir@dimir.eu) |
| 22:18.37 | *** join/#debian rudi_s (~simon@austria125.server4you.de) |
| 22:18.37 | *** join/#debian milobit (~milobit@unaffiliated/milobit) |
| 22:18.37 | *** join/#debian mackwerk (~Mackwerk@83.221.154.225) |
| 22:18.37 | *** join/#debian nonconvergent (~neuromanc@c-24-30-40-161.hsd1.ga.comcast.net) |
| 22:18.37 | *** join/#debian habstinat (~habs@pool-74-108-24-34.nycmny.fios.verizon.net) |
| 22:18.37 | *** join/#debian nitz (~nitz@unaffiliated/nitz) |
| 22:18.38 | *** join/#debian mikul (~mikul@c83-248-196-245.bredband.comhem.se) |
| 22:18.38 | *** join/#debian willmore (~willmore@c-98-220-135-28.hsd1.in.comcast.net) |
| 22:18.38 | *** join/#debian abrotman (~abrotman@pdpc/supporter/active/abrotman) |
| 22:18.38 | *** join/#debian nocoast (~quassel@2607:f3f0:2::cf34:f2b0) |
| 22:18.38 | *** join/#debian Eryn_1983_FL (~Eryn_1983@72.238.104.100) |
| 22:18.38 | *** join/#debian tattoli_ (~wat@pool-173-70-26-142.nwrknj.fios.verizon.net) |
| 22:18.38 | *** join/#debian RobbyF (~HSB@vps1.hostingsharedbox.com) |
| 22:18.38 | *** join/#debian JonathanD (~JonathanD@freenode/staff/jonathand) |
| 22:18.38 | *** join/#debian rasusto (~devnull@208.58.60.35) |
| 22:18.38 | *** join/#debian pmo (~dark@pdpc/supporter/base/pmo) |
| 22:18.38 | *** join/#debian K4k (~K4k@unaffiliated/k4k) |
| 22:18.38 | *** join/#debian crashmag (~crashmag@crashmag.net) |
| 22:18.38 | *** join/#debian grn (~grn@gateway/shell/mydevil.net/x-adiakclujjuqzfuk) |
| 22:18.38 | *** join/#debian DrRen (Des@drren.d-d-o-s.us) |
| 22:18.38 | *** join/#debian _bt (foobar@77.240.12.157) |
| 22:18.38 | *** join/#debian firztspawn (~firztspaw@unaffiliated/firztspawn) |
| 22:18.38 | *** join/#debian eir (~eir@freenode/utility-bot/eir) |
| 22:18.38 | *** join/#debian rabbieth (~bunny@2a01:4f8:120:9466:fee1:bad:dead:c0de) |
| 22:18.38 | *** join/#debian XSoul (~XRule@tooms.ddns.cablebg.net) |
| 22:18.38 | *** join/#debian Sthebig (~Sthebig@unaffiliated/sthebig) |
| 22:18.38 | *** join/#debian p8m (~p8m@mattli.us) |
| 22:18.38 | *** join/#debian Kamilion (kamilion@copper.sllabs.com) |
| 22:18.41 | *** join/#debian LaptopBrain (~brain@cpc48-mfld14-2-0-cust259.13-1.cable.virginmedia.com) |
| 22:18.49 | *** join/#debian jdoles (~jdoles@unaffiliated/jdoles) |
| 22:19.27 | *** join/#debian scoopex (~scoopex@85.214.140.184) |
| 22:19.27 | *** join/#debian maroloccio (~marolocci@222.Red-79-156-232.staticIP.rima-tde.net) |
| 22:19.27 | *** join/#debian raxo (~nx@b0tnet.me) |
| 22:19.27 | *** join/#debian blink_ (b20@gateway/shell/blinkenshell.org/session) |
| 22:19.27 | *** join/#debian Aramur (~arare@28.Red-81-32-228.dynamicIP.rima-tde.net) |
| 22:19.27 | *** join/#debian mtn (~mtn@174.32.161.70) |
| 22:19.27 | *** join/#debian ajb (~albert@pool-71-255-87-104.nwrknj.east.verizon.net) |
| 22:19.27 | *** join/#debian uuni (~Jellyfish@c-69-136-41-212.hsd1.ga.comcast.net) |
| 22:19.27 | *** join/#debian FreezingCold (~FreezingC@198-91-168-144.cpe.distributel.net) |
| 22:19.27 | *** join/#debian RushNY (~Rush.NY@cpe-74-65-68-95.stny.res.rr.com) |
| 22:19.27 | *** join/#debian m8 (~m@unaffiliated/m8) |
| 22:19.27 | *** join/#debian robcsi (~robcsi@188.24.105.80) |
| 22:19.27 | *** join/#debian codesoup (~codesoup@76-10-140-212.dsl.teksavvy.com) |
| 22:19.27 | *** join/#debian reazem (~reazem@unaffiliated/reazem) |
| 22:19.27 | *** join/#debian firecode (~irc@unaffiliated/firecode) |
| 22:19.27 | *** join/#debian tallest_red (~CNZ@ip98-169-205-124.dc.dc.cox.net) |
| 22:19.27 | *** join/#debian jned (~jned@d24-36-3-196.home1.cgocable.net) |
| 22:19.27 | *** join/#debian thunderrd (~thunderrd@119.42.79.179) |
| 22:19.27 | *** join/#debian karakedi (~eAC53C340@unaffiliated/orphan) |
| 22:19.27 | *** join/#debian lotherk (~lotherk@office.corpex-net.de) |
| 22:19.27 | *** join/#debian Leoneof (~Leoneof@unaffiliated/leoneof) |
| 22:19.27 | *** join/#debian ]3n19m4[ (~]3n19m4@95.Red-79-158-106.staticIP.rima-tde.net) |
| 22:19.27 | *** join/#debian goldkatze (~nobody@unaffiliated/goldkatze) |
| 22:19.27 | *** join/#debian darsie (~darsie@91-119-214-109.dynamic.xdsl-line.inode.at) |
| 22:19.27 | *** join/#debian Screedo (~Screedo@h100n4-ld-c-d1.ias.bredband.telia.com) |
| 22:19.27 | *** join/#debian oberling (~oberling@141.45.146.80) |
| 22:19.27 | *** join/#debian piedpipe1 (~pi@CPE-121-218-209-79.lnse4.cht.bigpond.net.au) |
| 22:19.28 | *** join/#debian shabius (~shaburov1@128-68-67-74.broadband.corbina.ru) |
| 22:19.28 | *** join/#debian james41382 (~james@c-71-197-239-106.hsd1.wa.comcast.net) |
| 22:19.28 | *** join/#debian jiohdi (~jiohdi@pool-173-65-75-42.tampfl.fios.verizon.net) |
| 22:19.28 | *** join/#debian magnulu (~magnulu@ti0025a380-dhcp1460.bb.online.no) |
| 22:19.28 | *** join/#debian wolfinterval (~wolfinter@173-164-237-81-SFBA.hfc.comcastbusiness.net) |
| 22:19.28 | *** join/#debian soletti (~syn@ks220860.kimsufi.com) |
| 22:19.28 | *** join/#debian Riztonnn (~toto@172.165.27.109.rev.sfr.net) |
| 22:19.28 | *** join/#debian WormFood (~wormfood@14.155.223.162) |
| 22:19.28 | *** join/#debian totte (~totte@unaffiliated/totte) |
| 22:19.28 | *** join/#debian Zeroedout (~quassel@69.172.148.201) |
| 22:19.28 | *** join/#debian somiaj (~jaimos@70-36-226-227.dsl.static.sonic.net) |
| 22:19.28 | *** join/#debian bipolar (~bipolar@204.186.46.94) |
| 22:19.28 | *** join/#debian frew (~frew@li490-218.members.linode.com) |
| 22:19.28 | *** join/#debian tharkun (~0@unaffiliated/tharkun) |
| 22:19.28 | *** join/#debian defnordic (~def@defnordic.at) |
| 22:19.28 | *** join/#debian ix (kvamtroe@unaffiliated/ix) |
| 22:19.28 | *** join/#debian makukasu (~mkasu@marc-kastner.com) |
| 22:19.28 | *** join/#debian tiron (~jeuk@cpe-72-129-111-247.socal.res.rr.com) |
| 22:19.28 | *** join/#debian packetologist (~kc@cpe-071-076-033-052.sc.res.rr.com) |
| 22:19.28 | *** join/#debian sukaeto (~sukaeto@li65-44.members.linode.com) |
| 22:19.28 | *** join/#debian PhantomGamers (~~phantom@unaffiliated/phantomgamers) |
| 22:19.28 | *** join/#debian Maple__ (Maple@trivialand/player/maple) |
| 22:19.28 | *** join/#debian gabedwrds (~gabriel@unaffiliated/gabesubdo) |
| 22:19.28 | *** join/#debian rdz (~rdz@netpd.org) |
| 22:19.28 | *** join/#debian DonVitoCorleone (DonVitoCor@unaffiliated/donvitocorleone) |
| 22:19.28 | *** join/#debian bla__ (bla@vivane.thera.be) |
| 22:19.28 | *** join/#debian thiagoss (thiagoss@pasanda.collabora.co.uk) |
| 22:19.29 | *** join/#debian Mr_Queue (~Mr_Queue@slug.centos6server.com) |
| 22:19.29 | *** join/#debian Rootert (~Rootert@54694E34.cm-12-2b.dynamic.ziggo.nl) |
| 22:19.29 | *** join/#debian sevenfourk (~sevenfour@unaffiliated/sevenfourk) |
| 22:19.29 | *** join/#debian Quimby (~Quimby@pollux.local.li) |
| 22:19.29 | *** join/#debian Pancakez (~me@71-87-88-129.dhcp.krny.ne.charter.com) |
| 22:19.29 | *** join/#debian shifty (~user@114-198-26-180.dyn.iinet.net.au) |
| 22:19.29 | *** join/#debian naquad (~naquad@naquad.me) |
| 22:19.29 | *** join/#debian pirret (~pirret@saho.tk) |
| 22:19.29 | *** join/#debian rafw (~rafw@cabestan.voilelatine.ch) |
| 22:19.29 | *** join/#debian zacts (~zacts@unaffiliated/zacts) |
| 22:19.29 | *** join/#debian SirLagz (~sirlagz@ppp121-45-232-21.lns20.per1.internode.on.net) |
| 22:19.29 | *** join/#debian jmcnaught (~jeremy@shelley.deptadapt.org) |
| 22:19.29 | *** join/#debian drinkycrow (~drinkycro@c-98-212-215-137.hsd1.in.comcast.net) |
| 22:19.29 | *** join/#debian mactimes_ (~mactimes@unaffiliated/mactimes) |
| 22:19.29 | *** join/#debian dbristow (~dbristow@nylug/member/dbristow) |
| 22:19.29 | *** join/#debian mist (~mrmist@freenode/staff/mist) |
| 22:19.29 | *** join/#debian ribasushi (~riba@mujunyku.leporine.io) |
| 22:19.29 | *** join/#debian entitativity (~entity@c-50-136-180-20.hsd1.ca.comcast.net) |
| 22:19.29 | *** join/#debian keith4 (~keith@unaffiliated/keith4) |
| 22:19.29 | *** join/#debian HeavyMetal (~heavymeta@unaffiliated/heavymetal) |
| 22:19.29 | *** join/#debian johskar (~johskar@h.skartland.net) |
| 22:19.29 | *** join/#debian JC_SoCal (uid1590@gateway/web/irccloud.com/x-wgmlmztolsdepyhn) |
| 22:19.29 | *** join/#debian KyleCloud (uid12278@gateway/web/irccloud.com/x-ptzxllbtxaotgnyd) |
| 22:19.29 | *** join/#debian semente (uid10507@gateway/web/irccloud.com/x-vgwyxcsmaduylkcq) |
| 22:19.29 | *** join/#debian DrOwl (~drowl@n36l.23.me.uk) |
| 22:19.29 | *** join/#debian fredsted (~simon@s2.fredsted.me) |
| 22:19.29 | *** join/#debian Cultist (~Cultist@c-71-194-185-109.hsd1.il.comcast.net) |
| 22:19.30 | *** join/#debian arnoldB (~arnoldB@vsr5.bechtoldt-srv.com) |
| 22:19.30 | *** join/#debian feitingen (~feitingen@gangsto.cz) |
| 22:19.30 | *** join/#debian cooldude (~cooldude1@unaffiliated/cooldude13233) |
| 22:19.30 | *** join/#debian musca (musca@tyrael.eu) |
| 22:19.30 | *** join/#debian joschi (~joschi@zuse.schalanda.name) |
| 22:19.30 | *** join/#debian cbmuser (~glaubitz@zlogin2.physik.fu-berlin.de) |
| 22:19.30 | *** join/#debian idl0r (~idl0r@gentoo/developer/idl0r) |
| 22:19.30 | *** join/#debian Serano (~serano@rooty.be) |
| 22:19.30 | *** join/#debian mjessome (~mjessome@108.174.53.58) |
| 22:19.30 | *** join/#debian beet0l (~beet0l@cpe-74-72-87-242.nyc.res.rr.com) |
| 22:19.30 | *** join/#debian cm13g09 (~chrism@panther.cmtechserv.co.uk) |
| 22:19.30 | *** join/#debian CissWit (~cisswit@6-8.fr) |
| 22:19.36 | *** join/#debian blink_ (b20@gateway/shell/blinkenshell.org/x-ufvralkcggmwybot) |
| 22:19.36 | *** join/#debian ksdncv (~ksdncv@unaffiliated/ksdncv) |
| 22:19.44 | *** join/#debian debhelper (~debhelper@crito.ucr.edu) |
| 22:19.44 | *** join/#debian iter_ (iter@ralphwiggum.org) |
| 22:19.44 | *** join/#debian mczhb (~mczhb@p4FF9B72D.dip0.t-ipconnect.de) |
| 22:19.44 | *** join/#debian fedesilva (~fedesilva@r190-135-78-35.dialup.adsl.anteldata.net.uy) |
| 22:19.44 | *** join/#debian fideloper (~fideloper@c-76-28-92-81.hsd1.ct.comcast.net) |
| 22:19.44 | *** join/#debian psnider85 (~Snider@80.35.96.58.static.exetel.com.au) |
| 22:19.44 | *** join/#debian M0ulin (~M0ulin@ANancy-652-1-416-15.w90-6.abo.wanadoo.fr) |
| 22:19.44 | *** join/#debian Emmanuel_Chanel (~emmanuel@O090160.ppp.dion.ne.jp) |
| 22:19.44 | *** join/#debian funky (~funky@unaffiliated/funky) |
| 22:19.45 | *** join/#debian caravel (~caravel@83.230.147.44) |
| 22:19.45 | *** join/#debian dtcrshr (~dataCrshr@unaffiliated/datacrusher) |
| 22:19.45 | *** join/#debian harrison (~quassel@li89-226.members.linode.com) |
| 22:19.45 | *** join/#debian optraz (~cyzie@115.132.69.4) |
| 22:19.45 | *** join/#debian Bish (~Bish@78.46.37.79) |
| 22:19.45 | *** join/#debian ArchDuke (~ArchDuke@unaffiliated/archduker) |
| 22:19.45 | *** join/#debian Dad` (~Dad@unaffiliated/dad/x-6432127) |
| 22:19.45 | *** join/#debian badiane_ka (~gdurand@cpe-72-229-36-216.nyc.res.rr.com) |
| 22:19.45 | *** join/#debian jasonwert (~w3rt@96-42-150-164.dhcp.trcy.mi.charter.com) |
| 22:19.45 | *** join/#debian asterismo (~asterismo@r186-54-48-137.dialup.adsl.anteldata.net.uy) |
| 22:19.45 | *** join/#debian Axlin (~Axlin@252.142-205-66.ftth.swbr.surewest.net) |
| 22:19.45 | *** join/#debian up365 (~up365@c-24-0-135-202.hsd1.nj.comcast.net) |
| 22:19.45 | *** join/#debian disposable (disposable@shell.websupport.sk) |
| 22:19.45 | *** join/#debian dpkg (~dpkg@unaffiliated/dpkg) |
| 22:19.45 | *** join/#debian TLH (~sin@amnezia.2f30.org) |
| 22:19.45 | *** join/#debian chattr (~regnad_kc@72.239.113.237) |
| 22:19.45 | *** join/#debian initself (~initself@li547-249.members.linode.com) |
| 22:19.45 | *** join/#debian spal (~susam@pdpc/supporter/active/spal) |
| 22:19.45 | *** join/#debian jrgill (~jrgill@unaffiliated/jrgill) |
| 22:19.45 | *** join/#debian sailerboy (~sailerboy@sailerboy.net) |
| 22:19.45 | *** join/#debian przemoc (~przemoc@unaffiliated/przemoc) |
| 22:19.45 | *** join/#debian transfinite (~ecc@unaffiliated/transfinite) |
| 22:19.45 | *** join/#debian chomwitt (~chomwitt@ppp-94-67-61-191.home.otenet.gr) |
| 22:19.45 | *** join/#debian Ex-Opesa (~Ex-Opesa@unaffiliated/ex-opesa) |
| 22:19.45 | *** join/#debian Opiumozor (~opiumozor@ip-169.net-81-220-123.rev.numericable.fr) |
| 22:19.45 | *** join/#debian gnarface (~gnarface@108-227-52-42.lightspeed.irvnca.sbcglobal.net) |
| 22:19.46 | *** join/#debian rvncerr (~rvncerr@unaffiliated/rvncerr) |
| 22:19.46 | *** join/#debian GNU\colossus (colo@truschnigg.info) |
| 22:19.46 | *** join/#debian Seji (~Seji@66.42.168.138) |
| 22:19.46 | *** join/#debian Hydroxide (~jimmy@debian/developer/jimmy) |
| 22:19.46 | *** join/#debian ankso (~conf@unaffiliated/r1nu-) |
| 22:19.46 | *** join/#debian StupidWeasel (~i.am@weasel.stupidweasel.com) |
| 22:19.46 | *** join/#debian Slugze (~Slugze@arb69-1-88-165-67-80.fbx.proxad.net) |
| 22:19.46 | *** join/#debian tjbenator (~tjbenator@c-67-160-48-249.hsd1.wa.comcast.net) |
| 22:19.46 | *** join/#debian offdutypirate (~offdutypi@250.31.135.216.muhlon.com) |
| 22:19.46 | *** join/#debian underdog` (~underdog`@blargo.org) |
| 22:19.46 | *** join/#debian nabziF (~msimons@wsip-70-182-190-125.dc.dc.cox.net) |
| 22:19.46 | *** join/#debian sphenxes (~sphenxes@91-119-85-22.dynamic.xdsl-line.inode.at) |
| 22:19.46 | *** join/#debian Rovanion (~rovanion@h-72-129.a163.priv.bahnhof.se) |
| 22:19.46 | *** join/#debian Wyzard (~mike@pool-71-166-54-46.bltmmd.fios.verizon.net) |
| 22:19.46 | *** join/#debian joar (~joar@fsf/member/jwandborg) |
| 22:19.46 | *** join/#debian Storfiskaren (~robert@s83-180-233-204.cust.tele2.se) |
| 22:19.46 | *** join/#debian Celelibi (celelibi@244.64.80.79.rev.sfr.net) |
| 22:19.46 | *** join/#debian WiXZlo (~WiXZlo@213.108.36.50) |
| 22:19.46 | *** join/#debian pfoo (~pfoo@unaffiliated/pfoo) |
| 22:19.46 | *** join/#debian plustwo (~quassel@unaffiliated/plustwo) |
| 22:19.46 | *** join/#debian fulgore (~fulgore@173.255.210.45) |
| 22:19.46 | *** join/#debian FlyingFoXy (~quassel@sanktwendel.weh.rwth-aachen.de) |
| 22:19.46 | *** join/#debian Ikarus (~ikarus@ip51cdc735.speed.planet.nl) |
| 22:19.46 | *** join/#debian Iridos (~k@unaffiliated/iridos) |
| 22:19.46 | *** join/#debian JoshuaP (~joshuap@admin.zannie.co.uk) |
| 22:19.46 | *** join/#debian SpeedyG (~speedyg@unaffiliated/speedyg) |
| 22:19.47 | *** join/#debian Kaboon (~Kaboon@524A5520.cm-4-3b.dynamic.ziggo.nl) |
| 22:19.47 | *** join/#debian Sharker (~pi@172.Red-83-36-220.dynamicIP.rima-tde.net) |
| 22:19.47 | *** join/#debian hipodilski (~hipo@pc-freak.net) |
| 22:19.47 | *** join/#debian talso (sixshot@S0106f0ad4e00e6a3.cg.shawcable.net) |
| 22:19.47 | *** join/#debian pseubodot (~p-dot@unaffiliated/pseubodot) |
| 22:19.47 | *** join/#debian Trellmor (~Trellmor@94.242.205.254) |
| 22:19.47 | *** join/#debian terr1 (~terr1@unaffiliated/terr1) |
| 22:19.47 | *** join/#debian Rame (~Rame@5.231.50.82) |
| 22:19.47 | *** join/#debian SATS (~SATS@unaffiliated/sats) |
| 22:19.47 | *** join/#debian xxtjaxx (~xxtjaxx@kde/developer/marschke) |
| 22:19.47 | *** join/#debian hourd (~dan@hourd.net) |
| 22:19.47 | *** join/#debian shroud (gunnar@icinga/team/shroud) |
| 22:19.47 | *** join/#debian jakenl (~jakenl@195.242.97.150) |
| 22:19.47 | *** join/#debian mrrothhcloud___ (uid4697@gateway/web/irccloud.com/x-lqlxbexdafxuttjk) |
| 22:19.47 | *** join/#debian robmozart (uid12935@gateway/web/irccloud.com/x-kbbyldrnjnmdavcx) |
| 22:19.47 | *** join/#debian CableNinja (cableninja@slippin.through.cat6.like.a.cableninja.net) |
| 22:19.47 | *** join/#debian ross` (~ross@spam.im) |
| 22:19.47 | *** join/#debian alexlist (~alexlist@static.198.17.47.78.clients.your-server.de) |
| 22:19.47 | *** join/#debian suy (~quassel@roger.badopi.com) |
| 22:19.47 | *** join/#debian Rydekull (rydekull@luda/rydekull) |
| 22:19.47 | *** join/#debian _KaszpiR_ (~kaszpir@unaffiliated/kaszpir/x-3157048) |
| 22:19.47 | *** join/#debian ashka (~postmaste@pdpc/supporter/active/ashka) |
| 22:19.47 | *** join/#debian phantomik (phantom@unicorn.chsh.org) |
| 22:19.47 | *** join/#debian rax-Y (~rax-@bnc.localh0st.co.uk) |
| 22:19.47 | *** join/#debian Gokee2 (~gokee2@24-113-140-9.wavecable.com) |
| 22:19.48 | *** join/#debian spacepluk (~spacepluk@ec2-50-19-126-100.compute-1.amazonaws.com) |
| 22:19.48 | *** join/#debian thebananafish (~IAMTHELIZ@192.249.62.146) |
| 22:19.48 | *** join/#debian kirkland (~kirkland@ec2-184-73-24-103.compute-1.amazonaws.com) |
| 22:19.48 | *** join/#debian Supernico (~nico@ks390725.kimsufi.com) |
| 22:19.48 | *** join/#debian frikinz (~frikinz@quinput.org) |
| 22:19.48 | *** join/#debian Sabbie (~sabbie@unaffiliated/sabbie) |
| 22:19.48 | *** join/#debian Pici (~Pici@ubuntu/member/pdpc.professional.pici) |
| 22:19.48 | *** join/#debian Disson (disson@virtual.disson.fi) |
| 22:19.49 | *** join/#debian vt0r (ZNC@unaffiliated/vt0r) |
| 22:20.02 | rog1121 | damn freenode |
| 22:20.03 | *** join/#debian debhelper (~debhelper@unaffiliated/debhelper) |
| 22:20.03 | *** mode/#debian [+o debhelper] by ChanServ |
| 22:20.08 | *** join/#debian optimusprimem (~globo_com@177.53.180.133) |
| 22:20.08 | *** join/#debian optimusprimem (~globo_com@unaffiliated/optimusprimem) |
| 22:20.38 | KeyboardNotFound | rog1121, debian 7 |
| 22:20.59 | rog1121 | KeyboardNotFound, which version of debian 7 |
| 22:21.04 | *** join/#debian maroloccio (~marolocci@222.Red-79-156-232.staticIP.rima-tde.net) |
| 22:21.15 | *** join/#debian f8l (~f8l@87-205-67-129.adsl.inetia.pl) |
| 22:21.53 | *** join/#debian MrGeneral (~MrGeneral@82.155.222.12) |
| 22:21.56 | *** join/#debian jayne (~jayne@freenode/staff/jayne) |
| 22:22.32 | *** join/#debian MrGeneral (~MrGeneral@bl6-222-12.dsl.telepac.pt) |
| 22:22.34 | rog1121 | ill just pretend you siad gnome |
| 22:24.02 | *** join/#debian kain88 (~kain88@kel30.kel.studentenwerk-goettingen.de) |
| 22:28.36 | *** join/#debian azcodex (~azcodex_@4.Red-79-145-49.dynamicIP.rima-tde.net) |
| 22:29.09 | *** join/#debian philipballew (~philip@ubuntu/member/philipballew) |
| 22:30.01 | *** mode/#debian [+l 1367] by debhelper |
| 22:30.06 | *** join/#debian HelenaKitty (~s98259@97e716f0.skybroadband.com) |
| 22:31.08 | *** join/#debian Berry6510 (~Berry@5356AEE3.cm-6-7c.dynamic.ziggo.nl) |
| 22:31.52 | *** join/#debian jmc-be (~jmc-be@unaffiliated/jmc-be) |
| 22:32.12 | cusco | so |
| 22:32.21 | cusco | I tried in single user mode |
| 22:32.23 | *** join/#debian JotaK (~ViV@unaffiliated/jotak) |
| 22:32.24 | cusco | then booted |
| 22:32.31 | cusco | and until Xorg is started |
| 22:32.38 | cusco | image is OK on svideo |
| 22:32.44 | babilen | dpkg: enter |
| 22:32.45 | dpkg | The enter key is not a substitute for punctuation. Hitting enter unnecessarily makes it difficult to follow what you are saying. Consider using ',', '. ', ';', '...', '---', or ':' instead. If you hit enter too often, you will be autokicked by debhelper for flooding the channel. |
| 22:32.46 | cusco | then it gets green ish |
| 22:32.51 | cusco | ok sorry |
| 22:33.05 | babilen | It's just much easier to follow you :) |
| 22:33.22 | cusco | and then once I go back to tty1 (alt ctrl f1) |
| 22:33.36 | cusco | image stays green ish ... what can I do? |
| 22:34.19 | *** join/#debian themill (~stuart@unaffiliated/themill) |
| 22:34.40 | *** join/#debian dreamon (~dreamon@unaffiliated/dreamon) |
| 22:34.50 | cusco | :/ |
| 22:34.59 | *** join/#debian Olanzapin (~suck@c83-191-65-236.cust.tele2.se) |
| 22:35.01 | *** join/#debian detha (~detha@196.41.3.190) |
| 22:35.29 | *** join/#debian Roenie (~Roenie@D978E338.cm-3-1d.dynamic.ziggo.nl) |
| 22:35.37 | *** join/#debian bariumbitmap (~nbeaver@108-241-79-18.lightspeed.cicril.sbcglobal.net) |
| 22:37.32 | *** join/#debian hash_ (4407cf57@gateway/web/freenode/ip.68.7.207.87) |
| 22:38.00 | *** join/#debian eir (~eir@freenode/utility-bot/eir) |
| 22:38.31 | hash_ | ok got the power off issue, dpkg finally got the image installed, how do i remove the old one |
| 22:38.42 | *** join/#debian adc (~adc@gateway/tor-sasl/adc) |
| 22:39.13 | *** join/#debian LinuxGuy2020 (~mark@cpe-65-25-56-177.neo.res.rr.com) |
| 22:39.53 | zaq | <PROTECTED> |
| 22:42.21 | KeyboardNotFound | can i change the toolbar in top of my monitor i use gnome debian 7 |
| 22:42.40 | hash_ | used dpkg --install linux-image-3.2.0-2-686-pae-dbg_3.2.13-1_i386.deb to add that image how do i remove the 3.2.0-4 image |
| 22:43.03 | *** join/#debian blagora (~blagora@host86-190-232-204.wlms-broadband.com) |
| 22:43.40 | mtn | KeyboardNotFound: not very much. you can add some things to it. they are called extensions |
| 22:45.11 | *** join/#debian LordShiva (~shiva@gateway/tor-sasl/lordshiva) |
| 22:46.11 | *** join/#debian dArK_IcE (~DARKICEPT@a79-168-154-69.cpe.netcabo.pt) |
| 22:46.48 | LinuxGuy2020 | Im not sure how I can take a deep folder hierarchy that contain many files and move them recursively. Take them from each seperate folder and place them all into a single folder. The files are all the same type so a wildcard would work. |
| 22:47.20 | *** join/#debian lcafiero (~lcafiero@c-50-136-212-63.hsd1.ca.comcast.net) |
| 22:47.32 | rryoumaa | LinuxGuy2020: rsync can do it |
| 22:47.38 | LinuxGuy2020 | k thanks |
| 22:47.41 | *** part/#debian LinuxGuy2020 (~mark@cpe-65-25-56-177.neo.res.rr.com) |
| 22:48.10 | rryoumaa | didn't have time to elaborate |
| 22:48.24 | babilen | KeyboardNotFound: https://extensions.gnome.org/ that is, other desktop environments are different in this regard (XFCE, KDE) -- You might also want to look in taskbar alternatives such as tint2 or so. It really depends on what you want. |
| 22:49.31 | rryoumaa | is there a way to make arbitrary programs (gkrellm, tint2) auto-hide? |
| 22:49.54 | *** join/#debian Niamkik (~Niamkik@s.oci.re) |
| 22:50.05 | babilen | I am not aware of a general method, no. |
| 22:50.06 | *** join/#debian YesCode (~NoCode@unaffiliated/nocode) |
| 22:50.36 | babilen | (might exist in some WMs/DEs or there might even be tools that achieve that, but I haven't really encountered anything like that) |
| 22:50.37 | *** join/#debian merica (~merica@46.246.44.73) |
| 22:52.22 | *** join/#debian jehan (~jehan@kiel4-dmz.gis.de) |
| 22:52.45 | *** join/#debian hash_ (4407cf57@gateway/web/freenode/ip.68.7.207.87) |
| 22:53.09 | hash_ | ok so how do i remove the 3.2.0-4 kernel |
| 22:53.16 | *** join/#debian Xeph (~Xeph@wikipedia/Xeph) |
| 22:53.22 | mtn | hash_: use synaptic |
| 22:53.37 | hash_ | ah ok ill try that |
| 22:55.11 | zaq | what should I be checking if any window manager is freezing a few seconds upon launch, but only if I run it the usual way - if ran from rescue mode and then 'su mysuer' openbox/xmonad won't freeze |
| 22:55.30 | babilen | hash_: Just remove the package, apt-get, aptitude or other package management tools can be used. Note that you should not remove the currently used kernel and I would recommend to keep at least two kernel versions installed if you stray from the default configuration. See http://debian-handbook.info/browse/stable/apt.html for an introduction to package management on Debian. |
| 22:55.34 | *** join/#debian burn (~quassel@77.73.96.239) |
| 22:55.37 | KeyboardNotFound | mtn, can i show all running programs, not only selected ? |
| 22:55.38 | *** join/#debian tuxIO (~tuxIO@95-210-192-3.ip.skylogicnet.com) |
| 22:56.03 | *** join/#debian LaptopBrain (~brain@cpc48-mfld14-2-0-cust259.13-1.cable.virginmedia.com) |
| 22:56.13 | babilen | KeyboardNotFound: Such an extension might exist .. tint2 or other stand alone panels can definitely do it. |
| 22:56.18 | mtn | KeyboardNotFound: upper right corner, or hit super (windows) key. is that what you mean? |
| 22:56.27 | mtn | upper left, sorry |
| 22:56.32 | babilen | KeyboardNotFound: You might want to ask these questions in a gnome specific channel (e.g. #gnome on irc.gnome.org) |
| 22:57.07 | *** join/#debian Will| (~wrboyce@88.198.95.211) |
| 22:57.28 | zaq | if xinit works, and xstart freezes - where could be the difference? |
| 22:57.30 | *** join/#debian johskar (~johskar@h.skartland.net) |
| 22:58.04 | *** join/#debian Roenie (~Roenie@D978E338.cm-3-1d.dynamic.ziggo.nl) |
| 22:58.15 | *** join/#debian Lolla1 (~LollaCorn@87-194-56-210.bethere.co.uk) |
| 22:59.09 | *** join/#debian sexyshape (~sexyshape@AAnnecy-652-1-532-68.w86-209.abo.wanadoo.fr) |
| 22:59.23 | *** join/#debian badass (~badass@unaffiliated/badass) |
| 23:00.40 | *** join/#debian azerus (~badass@unaffiliated/badass) |
| 23:02.34 | *** join/#debian tranceNRG (~tranceNRG@unaffiliated/trancenrg) |
| 23:03.55 | *** join/#debian lightcap (~lightcap@75-175-37-206.ptld.qwest.net) |
| 23:06.36 | *** join/#debian skule (~svs@exitus.logiva.dk) |
| 23:06.45 | *** part/#debian merica (~merica@46.246.44.73) |
| 23:08.01 | *** join/#debian mackwerk (~Mackwerk@83.221.154.225) |
| 23:08.18 | *** join/#debian codesoup (~codesoup@76-10-140-212.dsl.teksavvy.com) |
| 23:08.21 | *** join/#debian goose (~they.call@my.name.is.captain-kickass.net) |
| 23:10.00 | *** mode/#debian [+l 1354] by debhelper |
| 23:10.35 | goose | I've been getting this error anytime I run apt-get after upgrading from squeeze to wheezy: http://pastie.org/private/lunz6pjx0sh11vsv2cmyw |
| 23:10.52 | *** join/#debian j0hnlam (~j0hnlam@76-10-160-45.dsl.teksavvy.com) |
| 23:13.03 | *** join/#debian ajb (~albert@pool-71-251-43-152.nwrknj.east.verizon.net) |
| 23:14.58 | goose | disregard, fixed it |
| 23:15.03 | *** part/#debian goose (~they.call@my.name.is.captain-kickass.net) |
| 23:16.29 | *** join/#debian Bry8Star (~Bry8Star@gateway/tor-sasl/bry8star) |
| 23:18.20 | *** join/#debian thunderrd (~thunderrd@119.42.79.52) |
| 23:21.02 | *** join/#debian dorito_125 (~dorito_12@108-71-149-228.lightspeed.mmphtn.sbcglobal.net) |
| 23:22.32 | *** join/#debian dvs (~colin@cwv.teksavvy.com) |
| 23:23.45 | *** join/#debian witchmaster_ (~Bananaram@p5B0B331C.dip0.t-ipconnect.de) |
| 23:26.03 | *** join/#debian LordShiva (~shiva@gateway/tor-sasl/lordshiva) |
| 23:34.06 | *** join/#debian McMAGIC--Copy (~McMAGIC--@gateway/tor-sasl/mcmagic--copy) |
| 23:35.00 | *** join/#debian fedesilv_ (~fedesilva@r190-135-60-190.dialup.adsl.anteldata.net.uy) |
| 23:36.21 | *** join/#debian Selveste1 (~hds@31.25.23.230) |
| 23:38.50 | *** join/#debian asterismo (~asterismo@r190-135-131-237.dialup.adsl.anteldata.net.uy) |
| 23:39.26 | *** join/#debian reavengrey (~reavengre@unaffiliated/reavengrey) |
| 23:40.00 | *** mode/#debian [+l 1347] by debhelper |
| 23:40.45 | *** join/#debian dorito_125 (~dorito_12@108-71-149-228.lightspeed.mmphtn.sbcglobal.net) |
| 23:43.00 | *** join/#debian bollullera (~anuxi@89.7.24.109) |
| 23:43.09 | *** part/#debian rog1121 (~rog1121@unaffiliated/rog1121) |
| 23:45.24 | *** join/#debian guampa (~guampa@gateway/tor-sasl/guampa) |
| 23:46.10 | *** join/#debian LinuxGuy2020 (~mark@cpe-65-25-56-177.neo.res.rr.com) |
| 23:46.21 | *** join/#debian ImaLamer (foobar@cpe-65-189-51-74.cinci.res.rr.com) |
| 23:46.40 | *** join/#debian Quashie (~boingredd@CPEbcc810079c87-CMbcc810079c84.cpe.net.cable.rogers.com) |
| 23:48.16 | LinuxGuy2020 | I have a server running debian and I was wondering what file I can edit to run minetest-server for the game minetest? |
| 23:48.43 | abrotman | don't they have a support channel |
| 23:48.44 | abrotman | ? |
| 23:49.06 | LinuxGuy2020 | This has nothing to do with minetest itself. Read the question |
| 23:49.17 | LinuxGuy2020 | Better yet you just ignore me. |
| 23:49.35 | LinuxGuy2020 | What file on the system do I edit to launch commands at startup? |
| 23:50.18 | dvs | LinuxGuy2020: To run once or to run for the duration the system is on? |
| 23:51.21 | *** mode/#debian [+o abrotman] by ChanServ |
| 23:51.22 | *** mode/#debian [+q *!*@cpe-65-25-56-177.neo.res.rr.com] by abrotman |
| 23:51.22 | *** mode/#debian [-o abrotman] by abrotman |
| 23:51.28 | cthuluh | I guess rc.local is the answer, though a proper initscript would be better |
| 23:51.47 | dvs | Oh I guess we won't get an answer now. |
| 23:51.51 | abrotman | LinuxGuy2020: if you want to be impolite, please do it elsewhere, thank you. |
| 23:54.27 | *** part/#debian LinuxGuy2020 (~mark@cpe-65-25-56-177.neo.res.rr.com) |
| 23:58.32 | *** join/#debian p014k (~p014k@unaffiliated/p014k) |
| 23:58.36 | Riztonnn | how is it possible to set a color scheme for vim ? |
| 23:59.16 | *** join/#debian fideloper (~fideloper@c-76-28-92-81.hsd1.ct.comcast.net) |
| 23:59.36 | Riztonnn | I have create a folder .vim and then inside another folder 'colors', then I have copied the file inside, to finish in my .bashrc I have added the line "colorscheme toto.vim" but then I got the error : Cannot find color scheme adrian.vim |
| 23:59.40 | *** join/#debian dgeary2 (~debian@pa49-187-88-50.pa.nsw.optusnet.com.au) |
){kind=link}