| 00:00.01 | Loeb | So, I need to find a way to start kvm without using the 0000:02:00.1 hdmi audio device |
| 00:00.11 | neilthereildeil | can anyone else please help me install gnutls? |
| 00:00.24 | *** join/#debian JulioSaraiva (~juliosara@200.193.101.108) |
| 00:00.55 | somiaj | slystone: there are some core x11 packages that are very small and just common libs that packages can link against that could be used with x11 or without |
| 00:01.08 | somiaj | slystone: but for the most part yes, just realize some of the core ones (which aren't that big) may be needed |
| 00:01.13 | *** join/#debian diniwed (~gavron@ool-45746e24.dyn.optonline.net) |
| 00:02.24 | slystone | somiaj: how could I make sure to remove any graphical frontend without breaking stuff (for a command line usage)? |
| 00:03.02 | somiaj | slystone: easy, if you try to remove a package, and it removes packages you depend on, then you'll know |
| 00:03.23 | somiaj | slystone: i.e. apt-get remove packagename (it will list all other packages it wants to remove, check that list first) |
| 00:04.02 | slystone | Well, i tried to remove all xserver-xorg packages, but for a reason I can't fathom, the rest did not follow. è_é |
| 00:05.01 | slystone | Maybe I should try removing x11-common and x11-utils? =) |
| 00:05.06 | somiaj | slystone: only packages that depend on a package would get removed |
| 00:05.19 | somiaj | slystone: x11-common I think is one of the core ones I was talking about, but x11-utils I don't hthink you'll need |
| 00:05.39 | slystone | You don't think or you're sure? =) |
| 00:06.04 | somiaj | slystone: if any package you needs depends on one of those packges, you'll see it in the list of the packages you want to remove |
| 00:06.09 | slystone | (I'm a pain, but I've learnt to double check =)) |
| 00:06.12 | somiaj | slystone: and not if you happen to remove a bit to much, you can install it later. |
| 00:06.19 | somiaj | not=note |
| 00:06.25 | slystone | Fair enough! ;) |
| 00:06.28 | *** join/#debian bipul (~bipul@106.51.30.61) |
| 00:07.17 | *** join/#debian bipul (~bipul@106.51.30.61) |
| 00:07.56 | *** join/#debian bipul (~bipul@106.51.30.61) |
| 00:07.57 | *** join/#debian bipul (~bipul@linuxpadawan/padawan/bipul) |
| 00:08.40 | somiaj | slystone: another thing that might help: dpkg -l | grep "^rc" -- lists packages that are removed but still have configuration files on your system. |
| 00:10.02 | slystone | Cheers! Good one! :) |
| 00:10.34 | *** join/#debian subcache (~x@unaffiliated/subcache) |
| 00:11.06 | *** join/#debian FuriousGeorge_ (~chatzilla@pool-96-234-21-70.nwrknj.fios.verizon.net) |
| 00:12.50 | *** join/#debian ER_nesto (~ER_nesto@2e41edeb.skybroadband.com) |
| 00:13.09 | slystone | somiaj: http://zb.tdct.org/?7b43bacb32840395#OLCHy0AOkNLCd/x5T3wiHE9Aznw8WXL4cT+LOFu3VCk= |
| 00:15.33 | *** join/#debian patterson (~patterson@73.93.141.1) |
| 00:15.39 | *** join/#debian patterson_ (~patterson@73.93.141.1) |
| 00:15.52 | *** join/#debian Lokke (~Thunderbi@ip5f5ad252.dynamic.kabel-deutschland.de) |
| 00:16.20 | slystone | /dev/root 3.7G 3.4G 57M 99% / Little by little XD |
| 00:16.22 | *** join/#debian hR13_ (~hR13@h-217-22.a357.priv.bahnhof.se) |
| 00:16.31 | somiaj | slystone: you did have a lot of x11 stuff instaled, surprised. |
| 00:16.37 | *** join/#debian alexandros_c (~alexandro@unaffiliated/alexandros-c/x-1684531) |
| 00:16.49 | somiaj | slystone: those packages are all removed but contain configuration files. you can dpkg --purge each of those packages to remove their config files |
| 00:17.12 | somiaj | slystone: disclaimer: This will remove the configs, do this only on packages you don't want to keep a backup of the configs |
| 00:18.01 | *** mode/#debian [+l 1616] by debhelper |
| 00:21.00 | *** join/#debian Queenslayer (~Queenslay@78.157.207.144) |
| 00:21.14 | *** join/#debian ccsdss (~ray@36.46.210.53) |
| 00:21.56 | Loeb | uh |
| 00:22.04 | Loeb | how do I undo the last aptitude command I commited? |
| 00:22.06 | *** join/#debian alternate_nick (~user_name@unaffiliated/tjt263) |
| 00:22.31 | *** join/#debian juantelez (~juantelez@unaffiliated/juantelez) |
| 00:24.02 | *** join/#debian Ticho_ (~Ticho@unaffiliated/ticho) |
| 00:24.41 | somiaj | Loeb: aptitude doens't include an undo. But it does include /var/log/aptitude so you can see what it did and manually undo it. |
| 00:24.59 | Loeb | I tried putting some openGL driver on and it nuked a bunch of stuff |
| 00:25.07 | *** join/#debian _aeris_ (~aeris@imirhil.fr) |
| 00:25.10 | Loeb | I think it's gonna break things so I gotta undo all that junk |
| 00:25.14 | Loeb | probably a few dozen packages |
| 00:25.34 | somiaj | Loeb: there should be a list of all the packages it removed so you can reinstall them |
| 00:25.59 | *** join/#debian denisk (~denisk@60.225.173.162) |
| 00:26.36 | *** join/#debian alexandr1 (~alexandro@unaffiliated/alexandros-c/x-1684531) |
| 00:26.42 | slystone | Cheers! :) |
| 00:27.03 | *** join/#debian MoonkYang (~moonkyang@208.64.31.205) |
| 00:29.51 | *** join/#debian dreamon_ (~dreamon@unaffiliated/dreamon) |
| 00:30.00 | *** join/#debian ac1dh0n3ycl0ud (~rg00d@cpe-74-69-247-47.maine.res.rr.com) |
| 00:30.59 | *** join/#debian crazyglitch (~crazyglit@99.196.203.33) |
| 00:31.26 | Loeb | It's saying a lot of the packages can't be found somiaj |
| 00:31.35 | *** join/#debian MaBunny (~Peter@117.194.194.60) |
| 00:32.07 | *** join/#debian bipul_ (~bipul7@139.59.5.42) |
| 00:32.19 | *** join/#debian roger__ (~roger@2601:586:c480:4c30:ccc7:6e99:d261:acf) |
| 00:32.40 | slystone | somiaj: Thanks for the help. I'm not done yet, but I should manage. :) |
| 00:33.20 | Loeb | holy hell it uninstalled xorg |
| 00:33.39 | Loeb | Welp, guess I'm restarting from scratch then |
| 00:34.02 | SerajewelKS | does avconv have an input mode where inputs are read sequentially instead of merged together? |
| 00:34.50 | bipul_ | hi |
| 00:38.00 | *** mode/#debian [+l 1610] by debhelper |
| 00:38.25 | *** join/#debian denisk (~denisk@60.225.173.162) |
| 00:41.14 | *** join/#debian xaa (~xaa@91.178.24.103) |
| 00:41.54 | *** part/#debian neilthereildeil (hidden-use@unaffiliated/neilthereildeil) |
| 00:42.12 | bazhang | ,v avconf-utils |
| 00:42.13 | judd | No package named 'avconf-utils' was found in amd64. |
| 00:43.39 | *** join/#debian texla (~ray@h145.201.20.98.dynamic.ip.windstream.net) |
| 00:43.41 | *** join/#debian bipul (~bipul7@linuxpadawan/padawan/bipul) |
| 00:45.22 | *** join/#debian Sander^home (55a71184@gateway/web/freenode/ip.85.167.17.132) |
| 00:45.29 | *** join/#debian Cybert1nus (~Cybertinu@cybertinus.customer.cloud.nl) |
| 00:46.12 | *** join/#debian secrgb (~secrgb@123.142.159.217.sta.estpak.ee) |
| 00:46.35 | Sander^home | Hi. Do anyone here know how the virtualization/kernel space/userspace rings in the cpu works? |
| 00:46.47 | Loeb | magic |
| 00:47.01 | Sander^home | What is those rings called? |
| 00:47.34 | monoxane | Security rings iirc |
| 00:47.42 | *** join/#debian sleonard (~sleonard@adsl-184-36-81-192.asm.bellsouth.net) |
| 00:47.51 | Sander^home | Is systemd in such a ring? |
| 00:48.26 | monoxane | Protection rings, https://en.m.wikipedia.org/wiki/Protection_ring |
| 00:48.30 | monoxane | Dunno |
| 00:48.33 | *** join/#debian fstd_ (~fstd@unaffiliated/fisted) |
| 00:48.43 | monoxane | Probs in the kernel one |
| 00:48.55 | bipul | Hi,I am making a script that will run on debian, unfortunately my script http://sprunge.us/gGND ,giving me this error http://sprunge.us/MIId |
| 00:52.06 | *** join/#debian sulfyr (~bob@unaffiliated/sulfyr) |
| 00:52.22 | Sander^home | I've had an idea for some time now (as this is what windows7 does), that there should be an own "audit ring", which makes sure the health of all other rings is good, that can audit it like a honeypot does. |
| 00:53.05 | Sander^home | There is 4 bits reserved for rings. |
| 00:53.27 | Sander^home | Sorry, 2 bits, 4 rings. |
| 00:53.28 | Sander^home | I belive. |
| 00:54.14 | Sander^home | Yeah, the wiki also says so. |
| 00:54.19 | *** join/#debian murfjr (~douseiais@185.21.216.185) |
| 00:54.34 | Sander^home | Wondring if its hard to add another ring in the middle. |
| 00:54.37 | *** join/#debian SpaceAce (~SpaceAce@124-150-77-239.dyn.iinet.net.au) |
| 00:54.57 | *** join/#debian murfjr (~douseiais@185.21.216.185) |
| 00:55.24 | *** join/#debian Belkaar (~Belkaar@unaffiliated/belkaar) |
| 00:55.29 | *** join/#debian ER_nesto (~ER_nesto@2e41edeb.skybroadband.com) |
| 00:57.11 | Sander^home | As intel have rings -1 -2 and -3 for special hardware audits. But there is no audits which goes across all rings in software. |
| 00:59.34 | *** join/#debian ER_nesto (~ER_nesto@2e41edeb.skybroadband.com) |
| 00:59.53 | Sander^home | Unless intel have special code for Linux in the rom, then Linux aint auditted. |
| 01:00.41 | *** join/#debian cuechan (~paul@x55b09401.dyn.telefonica.de) |
| 01:01.02 | Sander^home | But some how, ms. did make it work, I wish I knew more details, but I think they used the virtualization ring as an audit ring. |
| 01:02.04 | Sander^home | In this weeks twit security now, the explains everything in a 2 hour video podcast. |
| 01:02.10 | Sander^home | they* |
| 01:03.40 | Sander^home | Oh well.. I guess its pretty secure theese days with the built in anti overrun protection. |
| 01:03.52 | Sander^home | But the stack aint protected by that. |
| 01:04.45 | *** join/#debian MetalGearSolid (~MetalGear@unaffiliated/metalgearsolid) |
| 01:07.22 | *** join/#debian figlfdev (183e6d83@gateway/web/freenode/ip.24.62.109.131) |
| 01:08.00 | *** mode/#debian [+l 1604] by debhelper |
| 01:09.29 | *** join/#debian shootbird (~quassel@beepbeep.serverpit.com) |
| 01:12.03 | *** join/#debian spacebison (~bison@184-12-210-18.dr04.ekgv.ca.frontiernet.net) |
| 01:14.09 | *** join/#debian kooldavi (~kooldavi@p54BF4581.dip0.t-ipconnect.de) |
| 01:14.19 | Sander^home | I wish ublock origin was built into firefox, So I could get it on ipad and iphone. |
| 01:14.31 | Sander^home | It works very nice for security. |
| 01:14.48 | Sander^home | Remove all ads and things you dont want. |
| 01:14.53 | Sander^home | removes* :-) |
| 01:15.45 | *** join/#debian ioudas^work (~ioudas@66.186.175.34) |
| 01:15.51 | *** join/#debian harrison (~quassel@li89-226.members.linode.com) |
| 01:16.14 | *** join/#debian magyar (~magyar@unaffiliated/magyar) |
| 01:16.47 | *** part/#debian figlfdev (183e6d83@gateway/web/freenode/ip.24.62.109.131) |
| 01:16.58 | Sander^home | Or maybe plugin support on firefox mobile edition would be enough:) |
| 01:17.27 | Sander^home | I'll check it up with firefox guys. |
| 01:17.27 | *** join/#debian harrison (~quassel@li89-226.members.linode.com) |
| 01:17.46 | Sander^home | I think its enabled on android mobile. |
| 01:18.09 | *** join/#debian sidmo_ (~sidmo@p5489DC2B.dip0.t-ipconnect.de) |
| 01:18.12 | *** join/#debian Cybertinus (~Cybertinu@cybertinus.customer.cloud.nl) |
| 01:18.55 | *** join/#debian boinkboink (~joe@unaffiliated/boinkboink) |
| 01:22.55 | Loeb | hey, someone do me a favor |
| 01:22.59 | Loeb | run aptitude install libgl1-nvidia-glx:i386 |
| 01:23.11 | Loeb | don't install it unless you want to reinstall your OS |
| 01:23.18 | *** join/#debian cypherman (~santiago@r186-48-67-234.dialup.adsl.anteldata.net.uy) |
| 01:23.43 | Loeb | that's the apt command I ran and it nuked about 400 packages, I had nvidia-driver installed and working with a 750ti |
| 01:24.45 | *** join/#debian diegorw (b19b8652@gateway/web/freenode/ip.177.155.134.82) |
| 01:26.31 | *** join/#debian thunderrd (~thunderrd@110.77.194.7) |
| 01:26.46 | Sander^home | Loeb: I guess such an audit ring could report this behaviour.. But Maybe systemd cant be in that ring. |
| 01:27.07 | Loeb | Don't look at me, I don't put taxes in my linux |
| 01:27.07 | Sander^home | Just thinking loud here. |
| 01:27.33 | Loeb | are you asking because of that intel management chip they found the other day that runs at ring -3 or -4 or some junk? |
| 01:27.47 | Sander^home | Loeb, yes. |
| 01:28.00 | *** mode/#debian [+l 1595] by debhelper |
| 01:28.34 | Loeb | don't think anyone here really cares about that, try the gentoo channel or something |
| 01:28.45 | *** join/#debian Sucks (~sucks@2804:7f1:2080:8eae:a891:779c:16a0:ce04) |
| 01:28.52 | Loeb | you wanna go for maximum tinfoil until someone actually backengineers that thing and it becomes a public issue |
| 01:29.59 | *** join/#debian thunderrd_ (~thunderrd@110.77.173.143) |
| 01:30.53 | *** join/#debian aaro1 (~aaro@unaffiliated/xyox/x-040147) |
| 01:32.53 | *** join/#debian timahvo1 (~rogue@197.237.174.52) |
| 01:33.45 | *** join/#debian d4rklit3 (~textual@cpe-76-90-191-36.socal.res.rr.com) |
| 01:33.59 | *** join/#debian Colti (Miramar-FL@unaffiliated/miramar-fl) |
| 01:34.24 | *** join/#debian kiao2938 (~mj@p3EE25AA8.dip0.t-ipconnect.de) |
| 01:35.45 | Sander^home | Loeb: Do you know if there is some kinda auto bug reporting in debian? |
| 01:36.35 | *** join/#debian ER_nesto (~ER_nesto@2e41edeb.skybroadband.com) |
| 01:36.54 | Loeb | don't look at me, I'm just switching my main OS over today |
| 01:37.05 | Loeb | or trying to, I had a whole day's worth of work nuked by a bad apt command |
| 01:37.13 | Loeb | now I can barely get the damn thing to reinstall |
| 01:37.24 | Loeb | it pukes with my 750ti so I have to switch my 950 back into the main port |
| 01:37.51 | petemc | k |
| 01:38.42 | Loeb | Why does the installer keep trying to grab from a cd? |
| 01:38.43 | Sander^home | Loeb: maybe you could report it in. |
| 01:39.17 | *** join/#debian guardianJ (~javaserve@58-7-217-75.dyn.iinet.net.au) |
| 01:40.05 | Sander^home | Loeb: Have you removed the cd entry in sources.list? |
| 01:40.19 | Loeb | why the hell would I need to do that to install from a USB drive? |
| 01:40.28 | Loeb | Moreover why is it doing this when this is EXACTLY THE SAME THING I DID YESTERDAY |
| 01:40.52 | *** join/#debian ki0 (~ki0@134.red-2-137-147.dynamicip.rima-tde.net) |
| 01:44.25 | *** join/#debian Otani (~Yukiteru@unaffiliated/yukiteru) |
| 01:44.41 | Loeb | yo ok |
| 01:44.47 | Loeb | why does it want to use lilo instead of grub now |
| 01:44.50 | Loeb | WHY IS EVERYTHING DIFFERENT |
| 01:45.18 | Sander^home | Loeb: which version of debian are you using? |
| 01:45.34 | Loeb | 8.5 |
| 01:45.41 | *** join/#debian rqyc (~rqyc@mar13-2-82-246-223-195.fbx.proxad.net) |
| 01:45.41 | Loeb | amd64 xfce |
| 01:45.57 | Loeb | why the hell is this entirely different from what it did yesterday |
| 01:45.59 | Loeb | this makes no sense |
| 01:46.43 | *** join/#debian odla (~aldo@2-225-168-52.ip176.fastwebnet.it) |
| 01:47.12 | *** join/#debian johefernan (~joheferna@187.153.10.213) |
| 01:48.11 | *** join/#debian alex1a (~alex1a@a81-84-222-27.cpe.netcabo.pt) |
| 01:48.11 | *** join/#debian Jerm1 (~Jerm1@2605:e000:4ddb:bf00:ed3c:6768:4f3e:6250) |
| 01:48.24 | *** join/#debian Devastator (~devas@unaffiliated/devastator) |
| 01:48.42 | *** part/#debian js9600 (~js9600@87-57-20-106-dynamic.dk.customer.tdc.net) |
| 01:50.17 | *** join/#debian rgr (~user@p20030086AB0214907EDD90FFFE49493A.dip0.t-ipconnect.de) |
| 01:51.38 | *** join/#debian roger__ (~roger@2601:586:c403:a570:81c1:15e2:86f3:7d28) |
| 01:51.43 | *** join/#debian skrb_ (~skrb@p5B0F1F04.dip0.t-ipconnect.de) |
| 01:53.38 | *** join/#debian ghenry (~ghenry@ghenry.plus.com) |
| 01:53.58 | *** join/#debian ghenry (~ghenry@pdpc/supporter/monthlybyte/ghenry) |
| 01:54.06 | Sander^home | Loeb: What diffrent did you do? |
| 01:55.05 | Sander^home | I think it dosnt matter if you use grub or lilo. |
| 01:55.16 | *** join/#debian ioudas^work (~ioudas@66.186.175.34) |
| 01:55.45 | *** join/#debian ER_nesto (~ER_nesto@2e41edeb.skybroadband.com) |
| 01:56.32 | *** join/#debian sbine (~sbine@unaffiliated/sbine) |
| 02:01.15 | Sander^home | Loeb: I would recommend installing from a cd anyway. |
| 02:01.23 | Loeb | no |
| 02:01.25 | Loeb | that's stupid |
| 02:01.26 | *** join/#debian cerebro (~cerebro@host02.distrikthotelips2.d.subnet.rcn.com) |
| 02:01.34 | Loeb | there's no reason a USB stick shouldn't work |
| 02:01.47 | Loeb | it turns out dd managed to corrupt part of the image whilst writing |
| 02:02.57 | *** join/#debian ioudas^work (~ioudas@66.186.175.34) |
| 02:03.12 | *** join/#debian awwal (~awwal@199.241.132.84) |
| 02:03.31 | Sander^home | Loeb: I dont know the details, but I suspect that can be the reason why fallbacking to lilo. |
| 02:03.47 | Loeb | no |
| 02:03.53 | Loeb | I reimaged the usb drive and it's using grub now |
| 02:04.49 | Sander^home | Ok, good:) Do you have a very new graphic card? |
| 02:04.54 | *** join/#debian inex (~inex@unaffiliated/inex) |
| 02:06.25 | Loeb | gtx 950 has graphical errors with the live boot |
| 02:06.27 | Loeb | er |
| 02:06.29 | Loeb | the 750ti does |
| 02:06.31 | Loeb | the 950 works fine |
| 02:08.58 | Sander^home | All I know is that specifically nvidia drivers are lagging atleast 1 years. |
| 02:09.30 | Sander^home | Unless nvidia did listed to linus statement past years. |
| 02:09.34 | Sander^home | listen |
| 02:10.16 | Loeb | the newer card works better than the old one |
| 02:10.22 | Loeb | and this is with the built in free drivers that run by default |
| 02:10.27 | Loeb | with nvidia-drivers installed they work fine |
| 02:11.31 | *** join/#debian butterly_crumpet (~butterly_@c-50-139-33-21.hsd1.or.comcast.net) |
| 02:11.56 | *** join/#debian butterly_crumpet (~butterly_@c-50-139-33-21.hsd1.or.comcast.net) |
| 02:13.28 | *** join/#debian guardianJ (~javaserve@58-7-217-75.dyn.iinet.net.au) |
| 02:16.35 | *** join/#debian rolig (~rolig@unaffiliated/rollig) |
| 02:17.38 | *** join/#debian controll (~a@217.124.218.87.dynamic.jazztel.es) |
| 02:18.09 | Sander^home | Loeb: Its always nice to have a backup installation cd laying around, saves the dd hassle. |
| 02:20.03 | *** join/#debian ER_nesto (~ER_nesto@2e41edeb.skybroadband.com) |
| 02:20.44 | Sander^home | Loeb: I wouldnt use nvidia drivers with Linux. |
| 02:21.03 | *** join/#debian smultron (~smultron@pl885.nas81a-3.kobe.nttpc.ne.jp) |
| 02:21.05 | Sander^home | Loeb: I would go and buy a another graphic card. |
| 02:21.26 | Loeb | Yes I'm going to buy a whole different graphics card because some OS is acting up |
| 02:21.28 | Loeb | that's a great idea |
| 02:21.31 | Loeb | you're very smart |
| 02:21.59 | Sander^home | https://www.youtube.com/watch?v=IVpOyKCNZYw |
| 02:22.16 | *** join/#debian THX1138 (~Zzyzx@unaffiliated/zzyzx) |
| 02:22.16 | Sander^home | Oh well, if it works, then I guess it dosnt matter, but I meant for next time:) |
| 02:24.02 | *** join/#debian socomm (~socomm@96-40-156-20.dhcp.mtpk.ca.charter.com) |
| 02:24.52 | Sander^home | Linus going maniac at nvidia saying fuck you. As it breaks everything. |
| 02:25.14 | petemc | thats pretty old |
| 02:25.20 | *** join/#debian Jaga-Jaga (~Jaga@147.203.126.169) |
| 02:25.30 | Sander^home | Ok, so its improved now? |
| 02:26.08 | petemc | yes |
| 02:26.12 | *** join/#debian MoonkYang (~moonkyang@uv.bbido.com.yang.red) |
| 02:26.14 | Sander^home | Nice:) |
| 02:26.44 | Jaga-Jaga | my space doesnt work so i need to assign another key for it, like right altfor example. what should i put as "command" ? |
| 02:26.45 | *** join/#debian rolig (~rolig@unaffiliated/rollig) |
| 02:27.11 | jelly | Sander^home: the context was "everything" but their ARM development at the time. |
| 02:27.13 | jelly | was not* |
| 02:28.56 | petemc | ? |
| 02:29.12 | *** join/#debian ChubaDuba (~ChubaDuba@188.114.42.138) |
| 02:30.12 | Sander^home | jelly: I see, it blocked arm dev. But does Linux use some of the rings for the grafic drivers? |
| 02:31.38 | *** join/#debian bblindy (~bblinder@cpe-74-71-156-244.si.res.rr.com) |
| 02:36.18 | *** join/#debian hexagoxel (~hexagoxel@p200300798F2EED00021E33FFFE2231E9.dip0.t-ipconnect.de) |
| 02:38.30 | Jaga-Jaga | how do i assign "space" to my ALT_R key ? |
| 02:39.40 | Devastator | ok, I've booted gparted, created GPT partition table on my brand new SSD, then I can use debian installer to make the partitions and after that install Windows for my dual boot? or should I create the partitions in gparted already? |
| 02:41.11 | *** join/#debian bob (~bob@c-73-27-72-31.hsd1.fl.comcast.net) |
| 02:41.32 | *** join/#debian aaro1 (~aaro@unaffiliated/xyox/x-040147) |
| 02:42.06 | Jaga-Jaga | what is the terminal command for "space"? (I want to assign it to another key) |
| 02:42.08 | *** join/#debian ki0 (~ki0@134.red-2-137-147.dynamicip.rima-tde.net) |
| 02:45.35 | *** part/#debian boinkboink (~joe@unaffiliated/boinkboink) |
| 02:46.25 | *** join/#debian ilCyx86_64 (~ilCyx86_6@h28.163.23.98.static.ip.windstream.net) |
| 02:46.31 | Devastator | somiaj ping :) |
| 02:46.33 | *** join/#debian chachasmooth (~chachasmo@unaffiliated/chachasmooth) |
| 02:49.30 | *** join/#debian quaker_ (b156c61a@gateway/web/freenode/ip.177.86.198.26) |
| 02:50.00 | quaker_ | games in fullscreen seems to run slower than windowed, regardless of resolution; is this a xorg issue or driver issue? e.g. warsow <http://warsow.gg> and ezquake <http://ezquake.sourceforge.net/download/>. in ezquake's case, running it in 640x480 seems slower than running in 1280x800 (both fullscreen) |
| 02:51.56 | *** join/#debian Queenslayer (~Queenslay@78.157.207.144) |
| 02:56.14 | *** join/#debian alvesadrian (~adrian@190.19.69.202) |
| 02:59.48 | *** join/#debian aaro (~aaro@unaffiliated/xyox/x-040147) |
| 03:01.59 | *** join/#debian babak (uid19622@gateway/web/irccloud.com/x-ipwbicrfwzsrajfj) |
| 03:05.48 | *** join/#debian r00tobo (~r00tobo@unaffiliated/r00tobo) |
| 03:05.49 | *** join/#debian booboy_laptop (~booboy@c-50-129-174-141.hsd1.il.comcast.net) |
| 03:08.03 | *** join/#debian RA3OR (~demon@unaffiliated/ra3or) |
| 03:08.08 | *** join/#debian Mutter (~Mutter@92-108-118-122.dynamic.upc.nl) |
| 03:08.24 | bipul | What does this error signify? E: Could not get lock /var/lib/dpkg/lock - open (11: Resource temporarily unavailable)" |
| 03:09.41 | petemc | another process running dpkg |
| 03:10.29 | *** join/#debian klow (~textual@c-98-247-49-57.hsd1.wa.comcast.net) |
| 03:11.23 | bipul | petemc, Only one process is allowed to run? not two? |
| 03:11.54 | petemc | not any more than one |
| 03:12.17 | petemc | hard to keep db consistent otherwise, etc |
| 03:12.22 | bipul | petemc, Why is that so? |
| 03:12.47 | bipul | You mean dpkg is linked with db? |
| 03:12.56 | petemc | yes |
| 03:13.45 | *** join/#debian booboy_laptop (~booboy@c-50-129-174-141.hsd1.il.comcast.net) |
| 03:13.54 | bipul | petemc, Do you have any link , where i can know more about it's entire architecture. How things work |
| 03:13.58 | *** join/#debian SpaceAce (~SpaceAce@203-206-243-6.dyn.iinet.net.au) |
| 03:14.11 | petemc | debian.org |
| 03:15.07 | bipul | Yes. |
| 03:15.09 | petemc | https://www.debian.org/doc/manuals/debian-reference/ch02.en.html |
| 03:18.12 | Loeb | Is there a way to blacklist a pci device in grub so the OS never even knows it exists? |
| 03:18.24 | zinx | Loeb: no |
| 03:18.35 | LambdaComplex | Loeb: what is the problem that you think that will solve? |
| 03:18.38 | zinx | Loeb: you can tell the kernel to ignore it, though. |
| 03:18.47 | *** join/#debian suspect1 (~max@CPE-139-168-192-128.lns1.way.bigpond.net.au) |
| 03:18.51 | zinx | Loeb: and you can do that via the kernel command line. |
| 03:19.52 | Loeb | I'm trying to use kvm/qemu with vga passthrough. The HDMI audio device will hang the system if I try to unbind it or launch the VM with it bound to vfio-pci. But since it's in the same IOMMU group (18), KVM wants both devices on vfio in order to boot |
| 03:20.54 | Loeb | since I can't get anyone to help me disable that requirement in KVM/Qemu/libvirt, I'm trying to just remove it from the group somehow. |
| 03:21.17 | Loeb | So far everything I've read is to just unbind it when the kernel loads. This may or may not work, if it doesn't it'll hang on boot. |
| 03:24.05 | *** join/#debian sauvin (~sauvin@about/linux/staff/sauvin) |
| 03:25.27 | *** join/#debian x032cx (~lxuser@unaffiliated/tdis) |
| 03:25.35 | Loeb | zinx, LambdaComplex Any ideas? |
| 03:26.17 | *** join/#debian pencilandpaper (~penciland@unaffiliated/pencilandpaper) |
| 03:26.18 | petemc | tried toggling bios settings? |
| 03:26.45 | Loeb | VT-d is enabled, not sure what else there is to toggle |
| 03:27.12 | Loeb | Unless there is a way to disable the HDMI audio in the GPU bios |
| 03:27.20 | Loeb | which would probably require a firmware mod, and windows to load the ROM |
| 03:28.18 | *** join/#debian pencilandpaper (~penciland@unaffiliated/pencilandpaper) |
| 03:28.45 | petemc | which gpu driver? |
| 03:28.57 | Loeb | nvidia-drivers |
| 03:29.03 | Loeb | I think lspci just says nvidia |
| 03:29.03 | petemc | perhaps boot argument |
| 03:29.24 | Loeb | I'm running a 950 to pass and a 750ti for the host, so I can't blacklist the driver |
| 03:30.07 | petemc | the plot thickens |
| 03:30.30 | Loeb | I can blacklist the audio driver |
| 03:30.37 | Loeb | that's how I got vfio-pci on the HDMI audio |
| 03:30.46 | Loeb | but it just hung the system when I started the VM |
| 03:30.46 | *** join/#debian BenNZ (~Ben__@118-93-25-22.dsl.dyn.ihug.co.nz) |
| 03:31.14 | Loeb | I actually had to hard shutdown after trying to unbind that device. It'd hang the terminal and after you shut down, it would unload everything except for one monitor and that monitor would stay black |
| 03:31.27 | Loeb | something was still runinng, and it only happened when I had tried to unbind that device |
| 03:32.55 | *** join/#debian Orbitrix (~Huevos@c-76-127-14-226.hsd1.nm.comcast.net) |
| 03:33.15 | *** join/#debian Orbitrix (~Huevos@c-76-127-14-226.hsd1.nm.comcast.net) |
| 03:33.25 | *** join/#debian npo (~np@c-66-31-34-186.hsd1.ma.comcast.net) |
| 03:34.58 | *** join/#debian mrrhq (~mrrhq@2602:b8:64c7:2200:227:10ff:fe25:d07c) |
| 03:34.59 | *** join/#debian pencilandpaper (~penciland@unaffiliated/pencilandpaper) |
| 03:35.59 | *** join/#debian dkas (~dkas@p4FEAA25B.dip0.t-ipconnect.de) |
| 03:37.04 | *** join/#debian simbalion` (~simba@96-32-132-82.dhcp.gwnt.ga.charter.com) |
| 03:37.34 | *** join/#debian firztspawn (~firztspaw@unaffiliated/firztspawn) |
| 03:37.56 | *** join/#debian denisk (~denisk@60.225.173.162) |
| 03:41.07 | Loeb | Can't seem to get vfio to grab either device from the stub now |
| 03:41.12 | Loeb | but the good news is it's hooking the stub on boot now |
| 03:41.21 | *** join/#debian s4ndm4n (~sandman@unaffiliated/sandman13) |
| 03:41.55 | *** join/#debian ghenry (~ghenry@pdpc/supporter/monthlybyte/ghenry) |
| 03:42.16 | *** join/#debian UDM (~UDM@cpc89502-haye24-2-0-cust354.17-4.cable.virginm.net) |
| 03:43.02 | *** join/#debian ki0 (~ki0@134.red-2-137-147.dynamicip.rima-tde.net) |
| 03:43.15 | *** part/#debian simbalion` (~simba@96-32-132-82.dhcp.gwnt.ga.charter.com) |
| 03:43.38 | *** join/#debian simbalion` (~simba@96-32-132-82.dhcp.gwnt.ga.charter.com) |
| 03:45.45 | *** join/#debian cobalt_ (40250e2f@gateway/web/freenode/ip.64.37.14.47) |
| 03:46.08 | Loeb | Progress: it doesn't hang when unbinding from pci-stub... |
| 03:46.28 | cobalt_ | Any encryption wizards about? |
| 03:47.17 | Loeb | holy hell it worked that time |
| 03:49.56 | cobalt_ | I was wondering if dd writing 100MB or so to the beginning of a full-disk encrypted Debian drive would render the data unreadable (at least, not able to be decrypted.) |
| 03:50.38 | petemc | of course |
| 03:51.04 | Loeb | I think the issue is it wasn't bound to pci-stub before I started |
| 03:51.11 | Loeb | if you don't do that, it'll throw all kinds of fits |
| 03:51.19 | Loeb | write this on the wall of knowledge for those who come after me |
| 03:51.38 | cobalt_ | petemc: Thanks. |
| 03:51.43 | cobalt_ | That's good to know. |
| 03:51.57 | *** join/#debian llucenic (~Thunderbi@rev-185-22-215-103.radiolan.sk) |
| 03:52.45 | *** join/#debian fekir (~fekir@2a02:8109:8c40:3700:225:d3ff:fec3:c8dc) |
| 03:52.57 | *** join/#debian pencilandpaper (~penciland@unaffiliated/pencilandpaper) |
| 03:53.24 | *** join/#debian sifeic (~sifeic@c-75-71-117-103.hsd1.co.comcast.net) |
| 03:56.43 | *** join/#debian jadz (~UFCking1@74.122.91.42) |
| 03:56.56 | *** join/#debian tytel (~tytel@209-6-45-101.c3-0.smr-ubr1.sbo-smr.ma.cable.rcn.com) |
| 03:58.09 | *** join/#debian Bae (~GitGud@unaffiliated/gitgud) |
| 03:59.01 | *** part/#debian sn0wmonster (~yeti@unaffiliated/sn0wmonster) |
| 03:59.51 | *** join/#debian scottj (~scott@unaffiliated/scottj) |
| 04:01.01 | *** join/#debian Croepha (~Croepha@maryannanddave.com) |
| 04:01.23 | *** join/#debian hasanatizaz2 (~hasan@39.50.152.217) |
| 04:02.36 | *** join/#debian simbalion` (~simba@96-32-132-82.dhcp.gwnt.ga.charter.com) |
| 04:05.00 | *** join/#debian ki0 (~ki0@134.red-2-137-147.dynamicip.rima-tde.net) |
| 04:05.10 | *** join/#debian Qann (~Nomad@hades.golgeli.net) |
| 04:05.29 | *** join/#debian n_blownapart (~john@2601:644:502:d470:9eef:d5ff:feff:34fe) |
| 04:05.41 | *** join/#debian Qann (~Nomad@unaffiliated/qann) |
| 04:07.39 | *** join/#debian ArchAngel_ (45f350c3@gateway/web/freenode/ip.69.243.80.195) |
| 04:08.23 | *** join/#debian lister (~test@64.145.94.118) |
| 04:08.29 | *** join/#debian markybob (~markybob@unaffiliated/markybob) |
| 04:10.12 | Guest14038 | hello? |
| 04:10.49 | Guest14038 | hello? |
| 04:11.18 | *** join/#debian jadz_ (~UFCking1@74.122.91.42) |
| 04:13.44 | *** join/#debian electro33 (uid613@gateway/web/irccloud.com/x-xwsexkndlxiqwwjw) |
| 04:15.38 | *** join/#debian rhizome (~rhizome@50-0-193-208.dsl.static.fusionbroadband.com) |
| 04:15.57 | *** join/#debian Arch_Angel (45f350c3@gateway/web/freenode/ip.69.243.80.195) |
| 04:16.14 | *** join/#debian hR13_ (~hR13@h-217-22.a357.priv.bahnhof.se) |
| 04:17.52 | Arch_Angel | hey i need help. How do you install Yaourt on a debian based computer. I don't know if its possible because if not i need to find a different way to install products like Steam |
| 04:18.20 | *** join/#debian Orbitrix (~Huevos@c-76-127-14-226.hsd1.nm.comcast.net) |
| 04:18.23 | simonlnu | don't need yaourt, just convert it |
| 04:18.41 | *** join/#debian Orbitrix (~Huevos@c-76-127-14-226.hsd1.nm.comcast.net) |
| 04:18.56 | Arch_Angel | yeah but where can i get steam in the repositories. it doesnt show |
| 04:19.30 | simonlnu | !non-free |
| 04:19.30 | dpkg | [non-free] a component which contains software that does not comply with the <DFSG>. To add non-free packages to your packages index, ask me about <non-free sources>. To see which non-free packages are installed ask me about <non-free list>. For the non-free tracking system, see http://nonfree.alioth.debian.org/ |
| 04:20.46 | simonlnu | or add non-free like above |
| 04:21.47 | Arch_Angel | how do you add them? |
| 04:22.31 | cobalt_ | I use Synaptic to add sources. |
| 04:22.56 | *** join/#debian ryouma (~user@unaffiliated/ryouma) |
| 04:23.40 | cobalt_ | Arch_Angel: But you can use the terminal with nano /etc/apt/sources.list |
| 04:23.43 | simonlnu | add non-free and contrib to your sources.list entries (i put them after main usually) |
| 04:23.51 | simonlnu | e.g. |
| 04:24.20 | simonlnu | deb http://httpredir.debian.org/debian/ jessie main non-free contrib |
| 04:25.23 | simonlnu | you'll need to run an update after |
| 04:25.31 | Arch_Angel | what do i type to add them? |
| 04:25.34 | *** join/#debian ki0 (~ki0@134.red-2-137-147.dynamicip.rima-tde.net) |
| 04:25.35 | simonlnu | apt-get update or using aptitude |
| 04:26.03 | simonlnu | look at the example i pasted |
| 04:26.23 | simonlnu | compare with yours |
| 04:26.29 | cobalt_ | Arch_Angel: It's a text file, so you'd need to use an editor. Such as: sudo nano /etc/apt/sources.list |
| 04:26.41 | Arch_Angel | yeah i have nano |
| 04:26.59 | *** join/#debian aaro (~aaro@unaffiliated/xyox/x-040147) |
| 04:27.05 | Sander^home | Do anyone know how far lxc have gotten regarding conteinerization, I think openvz have the history advantage, but is docker using lxc or? |
| 04:27.24 | cobalt_ | Or gnome-text-editor if you want a GUI. |
| 04:28.01 | *** mode/#debian [+l 1601] by debhelper |
| 04:29.53 | *** join/#debian phrozen77 (~phrozen77@ipbcc17662.dynamic.kabel-deutschland.de) |
| 04:30.56 | *** join/#debian mda1 (~UDM@cpc89502-haye24-2-0-cust354.17-4.cable.virginm.net) |
| 04:31.04 | *** join/#debian rhizome (~rhizome@50-0-193-208.dsl.static.fusionbroadband.com) |
| 04:39.05 | *** join/#debian edwardly (~edwardly@pool-108-26-225-137.bstnma.fios.verizon.net) |
| 04:39.05 | *** join/#debian edwardly (~edwardly@unaffiliated/edwardly) |
| 04:40.24 | Sander^home | At work we used to use openvz, but consider switching to lxc. |
| 04:40.46 | *** join/#debian HSKW (~HSKW@host23-198-dynamic.32-79-r.retail.telecomitalia.it) |
| 04:40.48 | HSKW | hell |
| 04:41.17 | HSKW | i've compiled ffmpeg but when i start the binary i receive this error: ffmpeg: error while loading shared libraries: libx264.so.132: cannot open shared object file: No such file or directory |
| 04:41.43 | somiaj | ,v ffmpeg |
| 04:41.45 | judd | Package: ffmpeg on amd64 -- squeeze-security: 4:0.5.10-1; squeeze: 4:0.5.10-1; squeeze-security-lts: 4:0.5.10-1+deb6u1; squeeze-backports: 6:0.8.6-1~bpo60+1; wheezy: 6:0.8.17-2; wheezy-security: 6:0.8.17-2+deb7u2; jessie-backports: 7:3.0.2-2~bpo8+1; sid: 7:3.0.2-4; stretch: 7:3.0.2-4; wheezy-multimedia: 8:1.0.10-dmo1; jessie-multimedia: 10:2.6.9-dmo1; sid-multimedia: |
| 04:41.46 | judd | 10:3.0.2-dmo2 |
| 04:41.52 | *** join/#debian slowmatt (~matt@c-98-213-36-145.hsd1.il.comcast.net) |
| 04:41.59 | somiaj | HSKW: any reason you are compling ffmpeg as opposed to using the version in jessie-backports? |
| 04:42.51 | HSKW | yes because the jessie not have the non free codec like fdk acc |
| 04:43.03 | Sander^home | HSKW: Have you followed the guide and including one and one library at a time, some might break. |
| 04:43.30 | HSKW | Sander^home: followed this https://trac.ffmpeg.org/wiki/CompilationGuide/Ubuntu |
| 04:43.33 | somiaj | ,v fdk-acc |
| 04:43.34 | judd | No package named 'fdk-acc' was found in amd64. |
| 04:43.52 | somiaj | ,v fdk-aac |
| 04:43.53 | judd | No package named 'fdk-aac' was found in amd64. |
| 04:43.56 | Sander^home | Maybe you need to install libx264-dev? |
| 04:44.08 | HSKW | i've compiled all... try to install |
| 04:44.33 | HSKW | THANKS |
| 04:44.34 | HSKW | it WORK |
| 04:44.39 | HSKW | :)) |
| 04:44.42 | somiaj | HSKW: looks like those codecs are avaialble in nonfree in the packages libfdk-aac0 |
| 04:44.46 | somiaj | ,v libfdk-aac0 |
| 04:44.47 | judd | Package: libfdk-aac0 on amd64 -- wheezy-multimedia: 0.1.1-dmo1; sid/non-free: 0.1.3+20140816-2; jessie/non-free: 0.1.3+20140816-2; stretch/non-free: 0.1.3+20140816-2 |
| 04:45.14 | *** join/#debian wingman2 (~wingman2@web.innestech.net) |
| 04:45.27 | *** join/#debian d4rklit3 (~textual@cpe-76-90-191-36.socal.res.rr.com) |
| 04:46.30 | HSKW | somiaj: how i can add this on apt-get? |
| 04:47.40 | somiaj | !non-free |
| 04:47.40 | dpkg | [non-free] a component which contains software that does not comply with the <DFSG>. To add non-free packages to your packages index, ask me about <non-free sources>. To see which non-free packages are installed ask me about <non-free list>. For the non-free tracking system, see http://nonfree.alioth.debian.org/ |
| 04:47.57 | somiaj | HSKW: you will have to add the non-free to your sources |
| 04:48.02 | somiaj | !non-free sources |
| 04:48.03 | dpkg | Edit /etc/apt/sources.list, ensure that the two main Debian mirror lines end with "main contrib non-free" rather than just "main", then «aptitude update». But bear in mind that you'll be installing <non-free> software. These may have onerous terms; check the licenses. See also <sources.list>. |
| 04:48.19 | somiaj | HSKW: and you'll have to add jessie-backports to your sources to get the ffmpeg from jessie-backports (jessie just has libav) |
| 04:48.23 | somiaj | !jessie-backports |
| 04:48.23 | dpkg | Selected packages intended for the Debian 9 "Stretch" release but recompiled for use with "Jessie" (8.x) can be found in the "jessie-backports" repository. Note that jessie-backports are on the regular mirror network, not on backports.debian.org. A suitable line for your sources.list is «deb http://httpredir.debian.org/debian/ jessie-backports main». Also ask me about <bdo>. |
| 04:50.28 | HSKW | somiaj: i use wheezy |
| 04:50.41 | HSKW | 4.7.2 |
| 04:51.03 | *** join/#debian tytel (~tytel@209-6-45-101.c3-0.smr-ubr1.sbo-smr.ma.cable.rcn.com) |
| 04:52.14 | *** join/#debian bobe (~bobe@x4d0a7db2.dyn.telefonica.de) |
| 04:52.52 | *** join/#debian curtan (~jip@unaffiliated/jippex) |
| 04:53.12 | *** join/#debian com33 (~com33@c-69-141-134-89.hsd1.nj.comcast.net) |
| 04:54.50 | somiaj | HSKW: you might want to consider upgrading to jessie if using a desktop, as wheezy-lts only really supports server software. |
| 04:55.04 | somiaj | HSKW: but yes my suggestions won't work in wheezy |
| 04:55.07 | *** join/#debian B11dy (~b@static-206-226-72-229.cust.tzulo.com) |
| 04:56.41 | *** join/#debian davidbz (~davidbz@cbl199-203-195-121.bb.netvision.net.il) |
| 04:57.26 | *** join/#debian Cabanossi (~Cabanossi@p5DD7B9E6.dip0.t-ipconnect.de) |
| 04:59.11 | *** join/#debian dreamon_ (~dreamon@unaffiliated/dreamon) |
| 04:59.48 | HSKW | somiaj: i user on server |
| 04:59.53 | HSKW | *use |
| 04:59.56 | *** join/#debian Chach_30 (~Chach_30@c-71-203-171-214.hsd1.fl.comcast.net) |
| 05:00.18 | HSKW | somiaj: solved with manual compiling... and the tips to install libx264-dev !! |
| 05:01.14 | *** join/#debian tomocha_____ (tomocha@bsd.gyojya.jp) |
| 05:02.08 | HSKW | infact ffmpeg is special for server-side |
| 05:02.52 | *** join/#debian fredl (~fredl@smtp.3dn.nl) |
| 05:03.32 | somiaj | Anyways you got it to work, I was just pointing out that software is now available in jessie. Maybe for future knowledge when you move to jessie |
| 05:05.01 | *** join/#debian peterS (peters@ip68-102-112-122.ks.ok.cox.net) |
| 05:05.59 | *** join/#debian simbalion` (~simba@tailpuff.net) |
| 05:07.02 | *** join/#debian sylvesterpillay (uid91040@gateway/web/irccloud.com/x-htvcaretbhpcahmp) |
| 05:07.18 | *** join/#debian VlijmenFileer (~vlijmenfi@199.195.193.181) |
| 05:09.07 | *** join/#debian simbalion (~simba@tailpuff.net) |
| 05:09.30 | Sander^home | HSKW: It didnt use to be very easy to compile ffmpeg from scratch, I think they would appriciate debian related feedback if documentation, but for some of those libraries, you cant turn on all functinality in the compile args, depending on which libraries you need to have. I remember it took a week of finding out which libraries was broken and not when I tried ages ago. |
| 05:10.31 | Sander^home | But its easy when you know which libs to compile in ahead. |
| 05:10.53 | Sander^home | I prefer as many libs as possible. |
| 05:11.07 | Sander^home | For best functionality. |
| 05:11.38 | *** join/#debian timahvo1 (~rogue@197.237.174.52) |
| 05:11.40 | *** join/#debian gmelis (~gmelis@ppp-2-84-9-229.home.otenet.gr) |
| 05:11.52 | *** join/#debian fredl (~fredl@smtp.3dn.nl) |
| 05:12.56 | *** join/#debian com33 (~com33@c-69-141-134-89.hsd1.nj.comcast.net) |
| 05:13.56 | *** join/#debian VlijmenFileer42 (~vlijmenfi@199.195.193.181) |
| 05:17.05 | *** join/#debian waitman (~waitman@dx.mehomi.com) |
| 05:18.15 | *** join/#debian AntiSpamMeta (~MetaBot@AntiSpamMeta/.) |
| 05:19.09 | *** join/#debian wyre (~wyre@gateway/shell/xshellz/x-ejxyilljnbbmwqzk) |
| 05:20.02 | *** join/#debian dr-ahti (~stiel@drahtigelgriller.de) |
| 05:20.07 | dr-ahti | hi |
| 05:21.17 | *** join/#debian pipeep (~pipeep@2605:6400:10:a15d:ca7:ea75:b12d:dead) |
| 05:21.26 | *** join/#debian guardianJ (~javaserve@58-7-217-75.dyn.iinet.net.au) |
| 05:22.04 | *** part/#debian guardianJ (~javaserve@58-7-217-75.dyn.iinet.net.au) |
| 05:22.48 | dr-ahti | i have a problem with my dvb-s equipment: kaffeine or me-tv could not scan and station. i get some error message like: "cannot parse scanfile.dvb" anyway if a scanfile.dvb is present or not. my favorit satelite is astra19.2e |
| 05:23.07 | *** join/#debian skiz (~skiz@96.238.223.6) |
| 05:26.21 | *** join/#debian aZz7eCh (~aZz7eCh@unaffiliated/azz7ech) |
| 05:28.11 | *** join/#debian cyan__ (~cyan@d159-225.icpnet.pl) |
| 05:28.13 | *** join/#debian CHCl3 (~CHCl3@95.61.147.160) |
| 05:30.50 | *** join/#debian rhizome (~rhizome@50-0-193-208.dsl.static.fusionbroadband.com) |
| 05:30.54 | *** join/#debian alexandr1 (~alexandro@unaffiliated/alexandros-c/x-1684531) |
| 05:31.01 | *** join/#debian JeremyE77 (~Jerm1@2605:e000:4ddb:bf00:ed3c:6768:4f3e:6250) |
| 05:37.18 | *** join/#debian wsky (~sexyboy@unaffiliated/sexyboy) |
| 05:37.21 | wsky | W: There is no public key available for the following key IDs: |
| 05:37.21 | wsky | 1397BC53640DB551 |
| 05:37.29 | wsky | what should i do with that, what changed |
| 05:37.32 | wsky | ? |
| 05:38.01 | wsky | it's on debian jessie |
| 05:39.40 | *** join/#debian d0lph1n98 (~d0lph1n@124.13.247.6) |
| 05:39.56 | SerajewelKS | wsky: you are using a third-party repo. i assume the google chrome repo. |
| 05:40.07 | wsky | let me check |
| 05:40.46 | SerajewelKS | wsky: basically you don't have the signing key added using apt-key, so apt can't verify that the repo contents are valid |
| 05:41.29 | *** join/#debian lucaswang (~lucaswang@114.111.166.13) |
| 05:42.41 | *** join/#debian GameOfTrolls (~GitGud@unaffiliated/gitgud) |
| 05:43.58 | wsky | SerajewelKS: thank you, it was actually the google-earth repository but also google |
| 05:44.01 | wsky | thanks |
| 05:44.01 | *** part/#debian wsky (~sexyboy@unaffiliated/sexyboy) |
| 05:45.20 | *** join/#debian tytel (~tytel@209-6-45-101.c3-0.smr-ubr1.sbo-smr.ma.cable.rcn.com) |
| 05:46.17 | *** join/#debian Wizek (~Wizek@94-21-229-90.pool.digikabel.hu) |
| 05:48.02 | *** join/#debian com33 (~com33@c-69-141-134-89.hsd1.nj.comcast.net) |
| 05:49.42 | *** join/#debian afernandez_ (~afernande@c-73-215-118-7.hsd1.nj.comcast.net) |
| 05:53.01 | *** join/#debian BenNZ (~Ben__@118-93-25-22.dsl.dyn.ihug.co.nz) |
| 05:53.50 | *** join/#debian sosby (~josh@unaffiliated/sosby) |
| 05:54.22 | *** join/#debian rnb (~Name@l49-88-77.cn.ru) |
| 05:56.19 | *** join/#debian Scourje (uid63311@gateway/web/irccloud.com/x-tjhujdfyskajjybl) |
| 05:58.48 | *** join/#debian tmh1999 (~tmh1999@14.177.226.215) |
| 06:06.47 | *** join/#debian placko (~user@188-155-85-95.dynamic.stcable.net) |
| 06:07.55 | *** join/#debian aaro1 (~aaro@unaffiliated/xyox/x-040147) |
| 06:08.01 | *** join/#debian ki0 (~ki0@134.red-2-137-147.dynamicip.rima-tde.net) |
| 06:10.51 | *** join/#debian neldogz (~neldogz@ool-4350296e.dyn.optonline.net) |
| 06:11.52 | *** join/#debian otirc (~crito@cpc2-burn7-2-0-cust351.10-1.cable.virginm.net) |
| 06:12.19 | placko | Hello, my eyes are no more in best shape. Can I setup to use huge cursor? It is sometimes hard for me to find cursor on screen |
| 06:12.48 | placko | I am using blackbox wm |
| 06:17.50 | *** join/#debian Wizek_ (~Wizek@94-21-229-90.pool.digikabel.hu) |
| 06:19.40 | somiaj | placko: I see a package called 'big-cursor' |
| 06:20.10 | *** join/#debian Mortumm (~Mortumtz@t157.ip1.netikka.fi) |
| 06:21.32 | *** join/#debian deznuts (uid92154@gateway/web/irccloud.com/x-ufaciamfpfozhgom) |
| 06:22.32 | *** part/#debian hobbily_ (~m@li1243-216.members.linode.com) |
| 06:22.41 | *** join/#debian bhuvi (~bhuvi@117.202.149.76) |
| 06:26.46 | *** join/#debian ephemer0l (~ephemer0l@unaffiliated/ephemer0l) |
| 06:27.47 | *** join/#debian bhuvi (~bhuvi@117.202.149.76) |
| 06:27.56 | *** join/#debian magyar_ (~magyar@unaffiliated/magyar) |
| 06:30.07 | *** join/#debian pavlushka (~Pavel@unaffiliated/pavlushka) |
| 06:31.37 | *** join/#debian Piratmajor (~Piratmajo@host-37-191-215-110.lynet.no) |
| 06:33.55 | *** join/#debian bhuvi (~bhuvi@117.202.149.76) |
| 06:35.54 | *** join/#debian MaBunny (~Peter@117.194.194.60) |
| 06:36.07 | *** join/#debian MisterGadfly (~MisterGad@unaffiliated/mistergadfly) |
| 06:36.24 | *** join/#debian aaro1 (~aaro@unaffiliated/xyox/x-040147) |
| 06:39.22 | *** join/#debian tytel (~tytel@209-6-45-101.c3-0.smr-ubr1.sbo-smr.ma.cable.rcn.com) |
| 06:40.42 | *** join/#debian uruk7 (~uruk@200.pool80-103-80.dynamic.orange.es) |
| 06:40.46 | uruk7 | hello can you help me -> ffmpeg -i "input.mp4"* -s '640x360' -b '350k' -ab '90k' -strict experimental "output.mp4" and then the error is ->The encoder 'aac' is experimental but experimental codecs are not enabled, add '-strict -2' if you want to use it |
| 06:41.20 | *** join/#debian bhuvi (~bhuvi@117.202.149.76) |
| 06:41.34 | *** join/#debian englishstudent (~englishst@181.90.18.185) |
| 06:42.20 | *** join/#debian Gnomethrower (~B@unaffiliated/gnomethrower) |
| 06:45.45 | *** join/#debian [cC] (~cc@cpe-74-140-139-64.cinci.res.rr.com) |
| 06:45.59 | *** join/#debian [cC] (~cc@unaffiliated/-cc-/x-0375068) |
| 06:47.48 | *** part/#debian [cC] (~cc@unaffiliated/-cc-/x-0375068) |
| 06:48.14 | *** join/#debian vvande_ (~vvande@168.235.86.179) |
| 06:49.03 | *** join/#debian bhuvi (~bhuvi@117.202.149.76) |
| 06:49.32 | *** join/#debian ki0 (~ki0@134.red-2-137-147.dynamicip.rima-tde.net) |
| 06:52.14 | *** join/#debian Trieste (~Trieste@unaffiliated/trieste) |
| 06:52.27 | *** join/#debian vvande (~vvande@168.235.86.179) |
| 06:52.56 | *** join/#debian davidbz (~davidbz@cbl199-203-195-121.bb.netvision.net.il) |
| 06:54.11 | *** join/#debian nils_ (~nils_@pdpc/supporter/35for7/nils) |
| 06:55.42 | *** join/#debian duoi (~duoi@unaffiliated/duoi) |
| 06:57.11 | *** join/#debian hasanatizaz2 (~hasan@39.50.152.217) |
| 06:57.43 | *** join/#debian cyan__ (~cyan@d159-225.icpnet.pl) |
| 06:59.41 | *** join/#debian NickCao_ (uid128134@gateway/web/irccloud.com/x-glvhlluvdwkbscrh) |
| 06:59.46 | *** join/#debian Rust3dCor3 (~Rust3dCor@unaffiliated/rust3dcor3) |
| 06:59.52 | *** join/#debian hasanatizaz2 (~hasan@39.50.152.217) |
| 07:00.15 | *** join/#debian teclo- (42@unaffiliated/teclo) |
| 07:00.23 | *** join/#debian Philip_Traum (~dodd242@2600:8800:4485:3500::1) |
| 07:07.18 | *** join/#debian NickCao1 (~NickCao@58.34.72.92) |
| 07:12.13 | *** join/#debian lucdalton (~lucdalton@90.213.71.151) |
| 07:13.29 | *** join/#debian lucaswang (~lucaswang@14.47.125.218) |
| 07:13.44 | *** join/#debian vrederv (~vrederv@chello212186163122.11.vie.surfer.at) |
| 07:14.46 | *** join/#debian NickCao1 (~NickCao@58.34.72.92) |
| 07:16.28 | *** join/#debian slax0r_ (slax0r@unaffiliated/slax0r) |
| 07:17.17 | *** join/#debian hasanatizaz2 (~hasan@39.50.152.217) |
| 07:18.49 | *** join/#debian de-facto (~de-facto@unaffiliated/de-facto) |
| 07:19.52 | *** join/#debian CeBe (~CeBe@a81-14-235-90.net-htp.de) |
| 07:20.19 | *** join/#debian crash_ (~pi@81-227-88-143-no186.bredband.skanova.com) |
| 07:20.24 | *** join/#debian antgel (~topdog@82.166.98.41) |
| 07:22.01 | *** join/#debian CarlFK (~carl@c-98-223-145-234.hsd1.il.comcast.net) |
| 07:27.59 | *** join/#debian bhuvi (~bhuvi@117.202.149.76) |
| 07:28.01 | *** mode/#debian [+l 1609] by debhelper |
| 07:28.09 | *** join/#debian SlaGTaTs (~bilbo@cpc68385-donc11-2-0-cust226.17-1.cable.virginm.net) |
| 07:31.40 | *** join/#debian GJ_ (~Thunderbi@88.159.120.241) |
| 07:31.55 | *** join/#debian spectie (~fran@unaffiliated/spectie) |
| 07:33.08 | placko | thanks somiaj, i installed big-cursor. now i am going to reboot computer to see how it works |
| 07:33.27 | *** join/#debian tytel (~tytel@209-6-45-101.c3-0.smr-ubr1.sbo-smr.ma.cable.rcn.com) |
| 07:37.35 | *** join/#debian bhuvi (~bhuvi@117.202.149.76) |
| 07:40.06 | *** join/#debian d0nn1e (~d0nn1e@cpe-75-183-8-113.triad.res.rr.com) |
| 07:40.42 | *** join/#debian Pr0metheus (~nezos@ppp046177064225.access.hol.gr) |
| 07:41.19 | *** join/#debian Levure (~quassel@229.222-201-80.adsl-dyn.isp.belgacom.be) |
| 07:42.26 | *** join/#debian volcX (3a089d06@gateway/web/freenode/ip.58.8.157.6) |
| 07:42.56 | *** join/#debian f10 (~flo@77.87.48.191) |
| 07:43.33 | *** join/#debian ragedragon (~ragedrago@hus54-1-78-214-148-27.fbx.proxad.net) |
| 07:44.32 | volcX | gnome/jessie no root terminal and su root gives authintiication error. Any ideas? |
| 07:45.26 | *** join/#debian bn` (~Patrice@ip5f5933a6.dynamic.kabel-deutschland.de) |
| 07:45.34 | *** join/#debian teclo- (42@unaffiliated/teclo) |
| 07:46.06 | *** join/#debian aaro1 (~aaro@unaffiliated/xyox/x-040147) |
| 07:47.46 | *** join/#debian multi_io (~olaf@x55b246ac.dyn.telefonica.de) |
| 07:48.59 | *** join/#debian paperd (~micas@96.229.216.153) |
| 07:49.30 | *** join/#debian iSlayWyverns (~uid18915@ppp005054038153.access.hol.gr) |
| 07:51.53 | *** join/#debian trueneu (~noone@94.230.162.227) |
| 07:52.26 | *** join/#debian f10_ (~flo@77.87.48.191) |
| 07:52.56 | *** join/#debian Envil (~envil@x4e30bd74.dyn.telefonica.de) |
| 07:54.06 | *** join/#debian Otani (~Yukiteru@unaffiliated/yukiteru) |
| 07:55.58 | *** join/#debian bhuvi (~bhuvi@117.202.149.76) |
| 07:56.59 | *** join/#debian klow (~textual@c-98-247-49-57.hsd1.wa.comcast.net) |
| 07:57.47 | *** join/#debian f10_ (~flo@77.87.48.191) |
| 08:11.04 | *** join/#debian bhuvi (~bhuvi@117.202.149.76) |
| 08:13.50 | *** join/#debian earthundead (~earthunde@78.25.122.189) |
| 08:13.55 | *** join/#debian scream (~scream@unaffiliated/scream) |
| 08:14.27 | *** join/#debian kiao2938 (~mj@p3EE25F63.dip0.t-ipconnect.de) |
| 08:15.49 | *** join/#debian MaxLanar (~user@197-136-190-109.dsl.ovh.fr) |
| 08:16.10 | *** join/#debian hR13_ (~hR13@h-217-22.a357.priv.bahnhof.se) |
| 08:17.25 | *** join/#debian mRokita (~ZNC@mrokita.pl) |
| 08:17.25 | *** join/#debian mRokita (~ZNC@unaffiliated/htmldp) |
| 08:18.43 | *** join/#debian jubo2 (~juboxi@wikipedia/jukeboksi) |
| 08:20.38 | *** join/#debian Jojan (~Jojan@90-229-214-144-no98.tbcn.telia.com) |
| 08:21.43 | *** join/#debian cyan__ (~cyan@d159-225.icpnet.pl) |
| 08:23.05 | *** join/#debian raphyduck (~raph@31.204.128.205) |
| 08:23.10 | *** join/#debian Dinux (~Yorick@2a02:a212:8600:2700:e8b3:ee79:1efd:4509) |
| 08:23.41 | *** join/#debian cdown_ (~cdown@82-132-234-75.dab.02.net) |
| 08:26.06 | *** join/#debian rimdeker (~rimdeker@unaffiliated/rimdeker) |
| 08:26.52 | *** join/#debian tallbarr (~none@unaffiliated/tallbarr) |
| 08:27.00 | *** join/#debian AntiSpamMeta (~MetaBot@AntiSpamMeta/.) |
| 08:27.40 | *** join/#debian tytel (~tytel@209-6-45-101.c3-0.smr-ubr1.sbo-smr.ma.cable.rcn.com) |
| 08:28.00 | *** mode/#debian [+l 1615] by debhelper |
| 08:28.10 | *** join/#debian aau__ (~aau@178.47.118.40) |
| 08:29.56 | *** join/#debian dreaded (~dreaded@2602:306:cea4:92e0::14) |
| 08:32.57 | *** join/#debian TomTomTo1 (~henryk@unaffiliated/tomtomtosch) |
| 08:34.50 | *** join/#debian weechat (~weechat@bull-srv04.bullhill.no) |
| 08:36.52 | *** join/#debian sunoano1 (~sa@unaffiliated/sunoano) |
| 08:36.55 | *** join/#debian denisk (~denisk@60.225.173.162) |
| 08:39.10 | *** join/#debian Makaveli7 (~emir@46.197.149.93) |
| 08:40.22 | *** join/#debian duoi (~duoi@unaffiliated/duoi) |
| 08:42.06 | *** join/#debian Niham (~textual@180.183.201.184) |
| 08:42.24 | *** join/#debian denisk (~denisk@60.225.173.162) |
| 08:43.11 | *** join/#debian bhuvi (~bhuvi@117.202.149.76) |
| 08:43.12 | *** join/#debian Cyph3r (~Cyph3r@m.eternal-wow.com) |
| 08:43.58 | *** join/#debian Niham (~textual@180.183.201.184) |
| 08:44.25 | Krigsforbryter | Hello, my server have got a load on 3.8 and i cant find any reason for that. When i try to test my disk with "hdparm -tT /dev/md2" (same with sda1 and sdb1) its output the device name and hang and not reacting on ctrl+c. /proc/mdstat says nothings is wrong, smart says nothing is wrong. help :( |
| 08:45.20 | *** join/#debian Niham (~textual@180.183.201.184) |
| 08:46.12 | brimonk | Krigsforbryter: Is your RAM full? Or rather, is /run or any other tmpfs full? |
| 08:46.36 | Krigsforbryter | brimonk: No, 28Gb free |
| 08:47.51 | *** join/#debian dutchfish (~wil@unaffiliated/dutchfish) |
| 08:48.10 | Krigsforbryter | brimonk: no mounts is full. /run have 1% use |
| 08:50.03 | brimonk | If you have iotop installed, you could try to run that and see what specifically is hogging the disk. |
| 08:51.20 | *** join/#debian sander85 (~sander@64.210.50.195.sta.estpak.ee) |
| 08:52.07 | Krigsforbryter | its upto 500K/s total diskwrite, mostly less |
| 08:53.17 | *** join/#debian trobotham (nitemare@bnc.ku.cx) |
| 08:53.45 | brimonk | Krigsforbryter: Is there some sort of verbosity mode that you can check out? Did you check dmesg for errors? |
| 08:54.05 | brimonk | 1/ |
| 08:55.42 | *** join/#debian pavlushka (~Pavel@unaffiliated/pavlushka) |
| 08:56.00 | *** join/#debian bhuvi (~bhuvi@117.202.149.76) |
| 08:56.33 | Krigsforbryter | no errors in dmesg, only a bad checksum on a UDP package the last month |
| 08:56.53 | *** join/#debian duoi (~duoi@unaffiliated/duoi) |
| 08:57.25 | *** join/#debian grimsley (~grimsley@2602:306:319e:c390:c00:e2c9:98c5:da5c) |
| 08:59.00 | TomasCZ | Krigsforbryter, try vmstat -S M 1 4 and pick two lines with numbers from it for me |
| 08:59.52 | Krigsforbryter | http://pastebin.com/ErPj8YF6 |
| 09:02.14 | *** join/#debian trueneu (~noone@94.230.162.227) |
| 09:03.31 | TomasCZ | Krigsforbryter, ok. wildshot, I don't see anything wrong. Did you do some operations with filesystems recently on some storage that errored out on IO or something? |
| 09:04.14 | *** join/#debian guardian (~guardian@planet-d.net) |
| 09:04.30 | *** join/#debian seoner (~usr@unaffiliated/sand3r) |
| 09:05.09 | Krigsforbryter | No, only change i have done the last month is add one domain to my vhost file in nginx and start a TeamSpeak3 server. And cant see that make a change |
| 09:05.14 | *** join/#debian up2late (~email@c-76-107-222-110.hsd1.tn.comcast.net) |
| 09:05.19 | up2late | anyone awake? |
| 09:05.27 | Krigsforbryter | I have try to stop the TS3 server without that help |
| 09:05.35 | *** join/#debian BadaBing (~kvirc@cpc84737-aztw28-2-0-cust401.18-1.cable.virginm.net) |
| 09:05.57 | TomasCZ | Krigsforbryter, second is what is the usual load you see? how many "cores" you have(if you have one skip next questions)? Did "top -d 1" or "htop -d 10" tell you what is using CPU most? |
| 09:06.07 | up2late | yay! can someone point me towards a img file for a debian install (similiar to the way bsd installer works) ? |
| 09:06.27 | TomasCZ | Krigsforbryter, if you use ts3server check updates and update? |
| 09:06.29 | *** join/#debian alexandros_c (~alexandro@unaffiliated/alexandros-c/x-1684531) |
| 09:06.40 | brimonk | up2late: Is it like, an installer from the net? |
| 09:06.49 | brimonk | up2late: Or is everything packaged alltogether? |
| 09:06.58 | *** join/#debian jt_ (~jt@ip-83-134-122-77.dsl.scarlet.be) |
| 09:06.58 | up2late | im trying to intall via a usb |
| 09:07.10 | brimonk | up2late: Do you have a connection to the internet? |
| 09:07.13 | up2late | but my bios only recognizes img wrote fiels |
| 09:07.13 | *** join/#debian jackbrown (~se@unaffiliated/jackbrown) |
| 09:07.37 | up2late | *files |
| 09:07.41 | brimonk | up2late: ... It sounds like you're writing the images to the usb wrong. |
| 09:07.42 | Krigsforbryter | TomasCZ: I have stoped the ts3 server, and it not help. I'am not running the TS3 server now |
| 09:08.39 | Krigsforbryter | TomasCZ: http://puu.sh/pGrWY/fe8d4f218a.png here is the load |
| 09:08.39 | *** join/#debian zxd (~zxd@85.64.21.250.dynamic.barak-online.net) |
| 09:09.01 | *** join/#debian piattino (~piattino@93-47-211-149.ip114.fastwebnet.it) |
| 09:09.47 | *** join/#debian bhuvi (~bhuvi@117.202.149.76) |
| 09:10.03 | *** join/#debian Hans-Martin (~ignore@i577BC113.versanet.de) |
| 09:10.34 | *** part/#debian Hans-Martin (~ignore@i577BC113.versanet.de) |
| 09:11.00 | *** join/#debian Felishia (~dev@unaffiliated/felishia) |
| 09:11.02 | Felishia | help |
| 09:11.05 | Felishia | debian is dead |
| 09:11.11 | Felishia | I can't do a wget |
| 09:11.26 | *** join/#debian Nnavd (~Nnavd@d50-92-9-182.bchsia.telus.net) |
| 09:11.32 | Felishia | it doesn't work it says `Resolving ipinfo.io (ipinfo.io)... failed: Name or service not known.` |
| 09:11.39 | Felishia | `wget: unable to resolve host address 'ipinfo.io'` |
| 09:12.32 | *** join/#debian clu5ter (~staff@unaffiliated/clu5ter) |
| 09:12.33 | Krigsforbryter | Felishia: try another url on wget? |
| 09:13.04 | alternate_nick | curl ipinfo.io |
| 09:13.21 | alternate_nick | curl ip-addr.tk |
| 09:13.34 | TomasCZ | Felishia, check your DNS servers are reachable, and inspect /etc/resolv.conf |
| 09:13.35 | Felishia | Krigsforbryter, none of them work |
| 09:13.52 | Felishia | what changed resolv.cong? |
| 09:13.58 | Krigsforbryter | ok, then the DNS settings is your problem |
| 09:14.07 | Felishia | not even an ip works |
| 09:14.14 | Felishia | I can't even ping outside the network |
| 09:14.31 | TomasCZ | Felishia, idk, I'm not NSA support to know your server |
| 09:14.36 | Felishia | 102 packets transmitted, 0 received, 100% packet loss, time 101807ms |
| 09:14.51 | Felishia | it's just a plain debian install |
| 09:15.08 | TomasCZ | Felishia, firewall? cable dead? at this point we don't even know where your problems are |
| 09:15.27 | Felishia | it was working until I ran sudo sysctl -p |
| 09:15.29 | *** join/#debian fennesz (~fennesz@80.106.199.205) |
| 09:15.32 | TomasCZ | Felishia, is your network interface even up? |
| 09:15.43 | *** join/#debian bhuvi (~bhuvi@117.202.149.76) |
| 09:15.44 | TomasCZ | aha |
| 09:16.29 | *** join/#debian AngeFede (~f3d3@vai87-2-78-232-53-248.fbx.proxad.net) |
| 09:17.55 | *** join/#debian catsup (~d@ps38852.dreamhost.com) |
| 09:18.14 | TomasCZ | Felishia, did you changed anything in configuration for sysctl? what was it? |
| 09:19.07 | *** join/#debian bolovanos (~bolovanos@91.201.22.5) |
| 09:19.21 | TomasCZ | Krigsforbryter, any networked filesystems? |
| 09:19.52 | TomasCZ | Krigsforbryter, did you try that top or htop? and observed it for few seconds? Are you running squid proxy? |
| 09:19.54 | *** join/#debian dayten (~gnoid@185.3.33.172) |
| 09:20.15 | *** join/#debian oish (~charlie@217.38.83.80) |
| 09:20.31 | Felishia | TomasCZ, yes I disabled ipv6 |
| 09:20.37 | Felishia | but then I enabled it again |
| 09:20.39 | *** join/#debian lotharkatt (~lotharkat@194.61.48.251) |
| 09:20.41 | Felishia | and nothing works this time |
| 09:21.08 | Felishia | #net.ipv6.conf.all.disable_ipv6 = 1 #net.ipv6.conf.default.disable_ipv6 = 1 #net.ipv6.conf.lo.disable_ipv6 = 1 |
| 09:21.14 | *** join/#debian guardianJ (~javaserve@58-7-217-75.dyn.iinet.net.au) |
| 09:21.15 | Felishia | now they are commented out |
| 09:21.20 | Felishia | it doesn't work at all |
| 09:21.49 | *** join/#debian tytel (~tytel@209-6-45-101.c3-0.smr-ubr1.sbo-smr.ma.cable.rcn.com) |
| 09:21.53 | TomasCZ | Felishia, are we talking about a box without IPv4 ? |
| 09:21.58 | *** join/#debian rumpole (~Rufu5@195-154-126-97.rev.poneytelecom.eu) |
| 09:22.00 | Felishia | no |
| 09:22.10 | Felishia | it has ipv4 |
| 09:22.15 | *** join/#debian bhuvi (~bhuvi@117.202.149.76) |
| 09:22.18 | TomasCZ | Felishia, ie: VPS with only ipv6 IP to the WAN |
| 09:22.23 | Felishia | no |
| 09:22.29 | Felishia | it's a fresh debian install |
| 09:22.35 | Felishia | I did that configuration... |
| 09:22.38 | Krigsforbryter | TomasCZ: no, only a md raid and a memdisk, no squid proxy. I cant see any problem in top, htop or glances |
| 09:22.49 | *** join/#debian davi (~davi@198.199.92.152) |
| 09:22.50 | *** join/#debian davi (~davi@gnu/davi) |
| 09:24.21 | TomasCZ | Krigsforbryter, well the only reasons I've asked on those filesystems and IO errors is that it sometimes happened to me and consequence of it was constantly higher cpu load avg most likely because system was unable to write something(hence is waiting for some device no longer present for example) |
| 09:24.53 | TomasCZ | Krigsforbryter, but that is just a theory. I've experienced it few times though. |
| 09:25.25 | *** join/#debian ynanm (~quassel@2001:8a0:62fe:2f01:a12c:9fb:1d6e:8ace) |
| 09:25.31 | TomasCZ | Krigsforbryter, try sync ? |
| 09:25.59 | Krigsforbryter | just the command "sync"? No parameters? |
| 09:26.09 | TomasCZ | yop |
| 09:26.33 | Krigsforbryter | shuld that take long time? |
| 09:26.53 | TomasCZ | Felishia, any errors when you ran sysctl -p in logs? ie: sudo tail -F /var/log/messages |
| 09:27.06 | *** join/#debian guardianJ (~javaserve@58-7-217-75.dyn.iinet.net.au) |
| 09:27.40 | TomasCZ | Krigsforbryter, usually not. but it might move us with logfiles towards what the problem might be caused by |
| 09:28.00 | *** mode/#debian [+l 1623] by debhelper |
| 09:28.05 | *** join/#debian bhuvi (~bhuvi@117.202.149.76) |
| 09:28.30 | Krigsforbryter | TomasCZ: I start it and i got no output from it, and its not reacting on ctrl+c. like hdparm -tT |
| 09:28.44 | *** join/#debian badabing (~badabing@cpc84737-aztw28-2-0-cust401.18-1.cable.virginm.net) |
| 09:28.58 | *** join/#debian SolEtGloria (~dushan@cable-178-149-124-230.dynamic.sbb.rs) |
| 09:29.04 | TomasCZ | Krigsforbryter, or yea a processes that are "hanging" for long time... Open another prompt and tail -F /var/logs/messages ....you can thing of interesting. |
| 09:29.04 | *** join/#debian alexandr1 (~alexandro@unaffiliated/alexandros-c/x-1684531) |
| 09:30.48 | Krigsforbryter | TomasCZ: the newest message there is 5hours old |
| 09:31.56 | *** join/#debian LNJ2GO (~lnj@x55b2d5fc.dyn.telefonica.de) |
| 09:33.36 | *** join/#debian whooo (75f0e762@gateway/web/freenode/ip.117.240.231.98) |
| 09:33.46 | whooo | i installed |
| 09:33.58 | whooo | debian but i can only see |
| 09:34.14 | whooo | black screen asking usename and password |
| 09:34.18 | *** join/#debian bhuvi (~bhuvi@117.202.149.76) |
| 09:34.39 | whooo | even after entering password I cannot see gnome desktop |
| 09:34.54 | whooo | anyone can help meto use gaphic desktop |
| 09:35.05 | Felishia | TomasCZ, Jun 26 09:27:51 debian kernel: [309534.045754] sysctl: The scan_unevictable_pages sysctl/node-interface has been disabled for lack of a legitimate use case. If you have one, please send an email to linux-mm@kvack.org |
| 09:35.22 | *** join/#debian GJ_ (~Thunderbi@88.159.120.241) |
| 09:35.23 | whooo | hello |
| 09:35.29 | TomTomTosch | whooo: okay short-winded friend, is gnome installed at all? |
| 09:35.42 | *** join/#debian jfdh (~jfdh@unaffiliated/jfdh) |
| 09:35.49 | whooo | i am new to debian , i think i skipped that part |
| 09:36.00 | whooo | @ tomtomtosch |
| 09:36.28 | TomTomTosch | whooo: dpkg -l gnome should say ii if gnome is installed |
| 09:37.24 | whooo | :) yep no gnome @ TomTomTosch |
| 09:37.34 | whooo | how can i install it ? |
| 09:37.46 | TomTomTosch | whooo: then as root: apt-get install task-gnome-desktop |
| 09:37.53 | whooo | i was using ubuntu , I have no idea about debian ! |
| 09:38.04 | TomasCZ | Felishia, can't you reboot the box? is it virtual or physical machine? |
| 09:38.21 | Felishia | physical |
| 09:38.36 | TomTomTosch | whooo: do you have an internet connection? |
| 09:38.59 | whooo | yeah I have . it says command not found |
| 09:39.01 | *** join/#debian Fjorgynn (~hej@unaffiliated/gothenburg) |
| 09:39.17 | Felishia | TomasCZ, how do I reboot it from console? |
| 09:39.33 | TomasCZ | whooo, you do realize that ubuntu is kind of based on debian? Just find how to get gnome. |
| 09:39.52 | *** join/#debian bhuvi (~bhuvi@117.202.149.76) |
| 09:39.53 | TomasCZ | Felishia, that's easy either infamous ctrl-alt-del or type shutdown -r now |
| 09:40.00 | TomTomTosch | whooo: paste the command and output to paste.debian.net please |
| 09:40.00 | whooo | TomTomTosch : why it says command not found |
| 09:40.15 | polyzen | WHOOHA |
| 09:40.52 | polyzen | when you step up in the place, you better step correct WHOOHA |
| 09:41.09 | polyzen | whooo, because the command cannot be found |
| 09:41.10 | Felishia | TomasCZ, none of them worked... apparently the commands are hidden in /sbin/ |
| 09:41.10 | TomTomTosch | whooo: which debian release are you using? |
| 09:41.33 | whooo | latest debian 8 |
| 09:41.37 | TomasCZ | Felishia, sorry obviously run the command with sudo in front |
| 09:41.41 | *** join/#debian dreamon_ (~dreamon@unaffiliated/dreamon) |
| 09:42.13 | Felishia | okay it works again |
| 09:42.21 | TomasCZ | Felishia, that's just me automatically having root shell open too. |
| 09:42.23 | Felishia | TomasCZ, yeah it just took me a while to find |
| 09:42.24 | whooo | I am running it on Vmware worskstaion 12 |
| 09:42.37 | Felishia | so can I just start openvpn now? and disable ipv6 |
| 09:42.41 | TomTomTosch | whooo: so just typing apt-get says command not found? |
| 09:42.44 | Felishia | or will it just fail again? |
| 09:43.02 | TomasCZ | Felishia, what are you tryin to achieve? |
| 09:43.15 | *** join/#debian das_ (~das@45.62.224.161) |
| 09:43.15 | TomTomTosch | whooo: or /usr/bin/apt-get |
| 09:43.46 | Felishia | TomasCZ, yes it just died again |
| 09:43.52 | whooo | TomTomTosch : no apt-get works fine |
| 09:43.52 | *** join/#debian agent66 (bc6824c5@gateway/web/freenode/ip.188.104.36.197) |
| 09:43.54 | Felishia | TomasCZ, use opnvpn |
| 09:44.12 | Felishia | but I can't because every time I disable ipv6 the whole internet dies |
| 09:44.34 | TomTomTosch | whooo: so apt-get install task-gnome-desktop it can't say command not found if apt-get works for you. |
| 09:44.48 | whooo | and when type apt-get install it asks am i root ? |
| 09:45.02 | whooo | are you root ? message |
| 09:45.03 | Felishia | so my system doesn't allow me to disable ipv6? |
| 09:45.03 | TomTomTosch | whooo: i said earlier, you need to be root. |
| 09:45.10 | Felishia | great |
| 09:45.29 | whooo | TomTomTosch : how can i root it |
| 09:45.55 | TomTomTosch | whooo: just type su and your password. |
| 09:46.01 | whooo | k |
| 09:46.10 | *** join/#debian bhuvi (~bhuvi@117.202.149.76) |
| 09:47.07 | *** join/#debian oish (~charlie@217.38.83.141) |
| 09:47.17 | Felishia | okay so it's no posible to disable ipv6 in debian |
| 09:47.36 | Felishia | because that means that the whole network interface is diabled |
| 09:47.55 | simbalion | Hi, I've got a server running jessie 8.5 and none of the bash startup files are loading for a user account.. |
| 09:48.12 | *** join/#debian Quatroking (~Quatrokin@5070983A.static.ziggozakelijk.nl) |
| 09:48.58 | whooo | TomTomTosch : root worked well |
| 09:49.17 | whooo | now it says unable to finf |
| 09:49.35 | whooo | unable to locate package |
| 09:50.09 | *** join/#debian rimdeker (~rimdeker@unaffiliated/rimdeker) |
| 09:50.20 | whooo | does that mean debian is not connected with internet |
| 09:50.29 | TomTomTosch | whooo: check if you can ping google.com |
| 09:51.16 | *** join/#debian towo` (~towo@unaffiliated/towo/x-4064351) |
| 09:51.50 | *** join/#debian ki0 (~ki0@134.red-2-137-147.dynamicip.rima-tde.net) |
| 09:52.17 | *** join/#debian trueneu (~noone@94.230.162.227) |
| 09:52.24 | *** join/#debian PseudoNoob (~PseudoNoo@unaffiliated/pseudonoob) |
| 09:53.04 | *** join/#debian bhuvi (~bhuvi@117.202.149.76) |
| 09:54.02 | *** join/#debian Youri (~youri@ip211-144-172-82.adsl2.static.versatel.nl) |
| 09:58.13 | *** join/#debian bhuvi (~bhuvi@117.202.149.76) |
| 09:58.19 | *** join/#debian guardianJ (~javaserve@58-7-217-75.dyn.iinet.net.au) |
| 09:59.08 | *** join/#debian eti (~eti@ABordeaux-652-1-118-50.w2-6.abo.wanadoo.fr) |
| 09:59.49 | *** join/#debian ravegen (~androirc@203.215.116.129) |
| 10:01.21 | *** part/#debian ravegen (~androirc@203.215.116.129) |
| 10:02.09 | *** join/#debian ER_nesto (~ER_nesto@2e41edeb.skybroadband.com) |
| 10:02.47 | *** join/#debian mbh (~pi@mhassack.plus.com) |
| 10:03.20 | *** join/#debian GJ_ (~Thunderbi@88.159.120.241) |
| 10:03.35 | *** join/#debian mangas (uid168018@gateway/web/irccloud.com/x-xtcxzzvzfkuicuey) |
| 10:03.43 | *** join/#debian err404 (~err404@195-154-72-21.rev.poneytelecom.eu) |
| 10:04.13 | *** part/#debian Felishia (~dev@unaffiliated/felishia) |
| 10:04.46 | *** join/#debian eSa| (~esa@host203-224-dynamic.54-82-r.retail.telecomitalia.it) |
| 10:06.31 | *** join/#debian bhuvi (~bhuvi@117.202.149.76) |
| 10:08.21 | *** join/#debian danxor (~none@145.133.255.103) |
| 10:09.13 | *** join/#debian enki (~enki@dynamic-78-30-156-27.adsl.eunet.rs) |
| 10:09.41 | *** join/#debian ScottE (~ScottE@unaffiliated/scotte) |
| 10:10.30 | *** join/#debian bhuvi (~bhuvi@117.202.149.76) |
| 10:11.21 | *** join/#debian plaxi (~plaxi@81-225-0-145-no185.bredband.skanova.com) |
| 10:11.31 | *** join/#debian spectie (~fran@unaffiliated/spectie) |
| 10:14.33 | *** join/#debian dselect (~dselect@unaffiliated/themill/bot/dselect) |
| 10:15.02 | *** join/#debian duoi (~duoi@unaffiliated/duoi) |
| 10:15.40 | *** join/#debian hR13_ (~hR13@h-217-22.a357.priv.bahnhof.se) |
| 10:15.50 | *** join/#debian tytel (~tytel@209-6-45-101.c3-0.smr-ubr1.sbo-smr.ma.cable.rcn.com) |
| 10:16.31 | *** join/#debian bhuvi (~bhuvi@117.202.149.76) |
| 10:18.00 | *** mode/#debian [+l 1630] by debhelper |
| 10:18.17 | *** join/#debian ER_nesto (~ER_nesto@2e41edeb.skybroadband.com) |
| 10:19.07 | *** join/#debian aax (~xaa@91.178.24.103) |
| 10:21.20 | *** join/#debian MachX (~MachX@27.106.120.111) |
| 10:21.26 | MachX | hi |
| 10:21.32 | MachX | anyone here? |
| 10:21.35 | *** join/#debian mazert (~mazert@ANice-653-1-467-12.w83-201.abo.wanadoo.fr) |
| 10:22.59 | dayten | yep |
| 10:24.49 | *** join/#debian bhuvi (~bhuvi@117.202.149.76) |
| 10:25.14 | *** join/#debian iSlayDragons (~uid18915@ppp089210158016.access.hol.gr) |
| 10:25.37 | *** join/#debian ribasushi (~riba@mujunyku.leporine.io) |
| 10:26.55 | *** join/#debian Rez_Doe (~Viowel@169.255.184.149) |
| 10:27.42 | *** join/#debian bhuvi (~bhuvi@117.202.149.76) |
| 10:27.48 | *** join/#debian Cabanossi (~Cabanossi@p5DD7B10D.dip0.t-ipconnect.de) |
| 10:29.23 | *** join/#debian SpaceAce (~SpaceAce@203-206-243-6.dyn.iinet.net.au) |
| 10:31.36 | *** join/#debian xaa__ (~xaa@91.178.24.103) |
| 10:31.41 | MachX | hi |
| 10:32.08 | *** join/#debian bolovanos_ (~bolovanos@91.201.22.5) |
| 10:32.15 | *** join/#debian xaa (~xaa@91.178.24.103) |
| 10:33.09 | *** join/#debian Lowl3v3l (~Lowl3v3l@ipservice-092-208-088-249.092.208.pools.vodafone-ip.de) |
| 10:33.12 | *** join/#debian Lowl3v3l_ (~Lowl3v3l@ipservice-092-208-088-249.092.208.pools.vodafone-ip.de) |
| 10:33.24 | *** join/#debian bhuvi (~bhuvi@117.202.149.76) |
| 10:34.58 | *** join/#debian Ex-Opesa (~Ex-Opesa@unaffiliated/ex-opesa) |
| 10:35.54 | *** join/#debian aax (~xaa@91.178.24.103) |
| 10:38.00 | *** mode/#debian [+l 1624] by debhelper |
| 10:38.28 | *** join/#debian bhuvi (~bhuvi@117.202.149.76) |
| 10:39.11 | *** join/#debian fennesz (~fennesz@80.106.199.83) |
| 10:42.10 | *** join/#debian Orphis (~orphis@adam.orphis.net) |
| 10:42.56 | *** join/#debian zanshin_ (~zanshin@krayt.ome.ksu.edu) |
| 10:43.52 | *** join/#debian folivora_ (~out@devnull.drwxr-xr-x.eu) |
| 10:44.05 | *** join/#debian jager_ (~quassel@fsf/member/jager) |
| 10:44.23 | *** join/#debian hays_ (~quassel@unaffiliated/hays) |
| 10:44.49 | *** join/#debian CHCl3 (~CHCl3@95.61.147.160) |
| 10:45.07 | *** join/#debian rkj (~rkj@trurl.r0x0r.me) |
| 10:45.37 | *** join/#debian GhostInTheShell (~melkor@chaosgate.angband.eu) |
| 10:45.50 | *** join/#debian trueneu (~noone@94.230.162.227) |
| 10:45.58 | *** join/#debian oish (~charlie@94.30.3.20) |
| 10:46.06 | *** join/#debian aegirs (~aegirs@lab75-6-88-185-126-91.fbx.proxad.net) |
| 10:46.16 | *** join/#debian tethra (~tethra@greyhound.shockingly.eu) |
| 10:46.16 | *** join/#debian tethra (~tethra@unaffiliated/tethra) |
| 10:46.43 | *** join/#debian bolt (r00t@unaffiliated/bolt) |
| 10:47.02 | *** join/#debian ashka (~postmaste@server2.shellgratuit.com) |
| 10:47.02 | *** join/#debian ashka (~postmaste@pdpc/supporter/active/ashka) |
| 10:47.15 | *** join/#debian iNs (~ins@krowkirobia.mooo.com) |
| 10:47.28 | *** join/#debian mactimes_ (~mactimes@unaffiliated/mactimes) |
| 10:47.43 | *** join/#debian js9600 (~js9600@87-57-20-106-dynamic.dk.customer.tdc.net) |
| 10:49.08 | *** join/#debian j08nY (~j08nY@31.170.82.41) |
| 10:49.08 | *** join/#debian HaMsTeRs (~SuperGayH@138019079169.ctinets.com) |
| 10:49.35 | *** join/#debian defekt (~defekt@46.102.241.111) |
| 10:49.59 | HaMsTeRs | good day everyone |
| 10:50.06 | *** part/#debian defekt (~defekt@46.102.241.111) |
| 10:51.31 | *** join/#debian pyface (~pyface@about/security/contributor/pyface) |
| 10:52.44 | *** join/#debian ki0 (~ki0@134.red-2-137-147.dynamicip.rima-tde.net) |
| 10:53.10 | *** join/#debian Strife89|Quassel (~quassel@adsl-98-80-186-65.mcn.bellsouth.net) |
| 10:53.40 | *** join/#debian CapsAdmin (~CapsAdmin@2a02:20c8:3450:106:54ec:18b7:4daf:70af) |
| 10:54.01 | *** join/#debian harobed3 (~harobed@aym57-1-78-235-112-40.fbx.proxad.net) |
| 10:54.06 | *** join/#debian harobed (~harobed@aym57-1-78-235-112-40.fbx.proxad.net) |
| 10:56.29 | *** join/#debian cdown (~cdown@82-132-234-75.dab.02.net) |
| 10:56.58 | *** join/#debian ki0 (~ki0@134.red-2-137-147.dynamicip.rima-tde.net) |
| 10:57.33 | *** join/#debian electro33 (uid613@gateway/web/irccloud.com/x-mclfuwvvddkjfyys) |
| 10:58.00 | *** mode/#debian [+l 1631] by debhelper |
| 10:58.15 | *** join/#debian mabigboy1 (~Thunderbi@support.modal.be) |
| 10:58.53 | mbh | 2 |
| 10:59.20 | *** join/#debian P6hjakonn (~NASA@61de-9288-a0cf-dd7f-2d80-8a2c-07d0-2001.dyn.estpak.ee) |
| 11:00.32 | *** join/#debian amcorreia (~amcorreia@2804:7f5:280:d95b::1) |
| 11:03.22 | *** join/#debian HaMmy (~SuperGayH@138019079169.ctinets.com) |
| 11:03.23 | *** join/#debian juantelez (~juantelez@unaffiliated/juantelez) |
| 11:03.56 | *** join/#debian Anonymes (uid168604@gateway/web/irccloud.com/x-arttfggkvvpasnat) |
| 11:04.07 | *** join/#debian Ad1_RN (~Ad1_RnR@88-199-45-84.matcom.com.pl) |
| 11:04.43 | *** join/#debian HaMmy (~SuperGayH@138019079169.ctinets.com) |
| 11:04.45 | *** join/#debian MisterGadfly (~MisterGad@unaffiliated/mistergadfly) |
| 11:05.21 | *** join/#debian Guest71 (~textual@13f067-a.v4-network.unstable.network) |
| 11:05.35 | *** join/#debian dpkg (~dpkg@unaffiliated/dpkg) |
| 11:08.00 | *** mode/#debian [+l 1637] by debhelper |
| 11:09.58 | *** join/#debian tytel (~tytel@209-6-45-101.c3-0.smr-ubr1.sbo-smr.ma.cable.rcn.com) |
| 11:12.36 | *** join/#debian flux242 (~chatzilla@89.204.138.51) |
| 11:12.37 | *** join/#debian lucdalton (~lucdalton@90.213.71.151) |
| 11:12.54 | *** join/#debian f10_ (~flo@77.87.48.191) |
| 11:13.49 | *** join/#debian blueness (~blueness@gentoo/developer/blueness) |
| 11:13.55 | *** join/#debian woshty (~irc@HSI-KBW-5-56-232-4.hsi17.kabel-badenwuerttemberg.de) |
| 11:16.04 | *** join/#debian oish_ (~charlie@94.30.3.20) |
| 11:16.52 | *** join/#debian galex|713 (~galex-713@static-176-158-131-7.ftth.abo.bbox.fr) |
| 11:16.56 | *** join/#debian jazz (~jazz@grichka.groove.nu) |
| 11:17.16 | *** join/#debian f10_ (~flo@77.87.48.191) |
| 11:20.33 | MisterGadfly | Why aren't the Jetbrains IDEs in the repos? |
| 11:20.36 | *** join/#debian xet7 (~xet7@85-76-77-61-nat.elisa-mobile.fi) |
| 11:21.22 | *** join/#debian realitysandwich (~realitysa@b2b-78-94-59-114.unitymedia.biz) |
| 11:22.04 | TomasCZ | simbalion, Are you positive you are using bash as your default shell? |
| 11:22.42 | *** join/#debian iSlayWyverns (~uid18915@ppp089210158016.access.hol.gr) |
| 11:23.04 | TomasCZ | simbalion, type bash and enter |
| 11:23.21 | SerajewelKS | MisterGadfly: because they are not DFSG-free |
| 11:23.35 | *** join/#debian shtirlic (~shtirlic@ec2-52-28-185-189.eu-central-1.compute.amazonaws.com) |
| 11:23.41 | MisterGadfly | Darn it |
| 11:23.43 | SerajewelKS | AFAICT they're not even freeware |
| 11:23.48 | SerajewelKS | you need to purchase a license |
| 11:24.13 | MisterGadfly | SerajewelKS: Idea CE is |
| 11:24.45 | *** join/#debian jackbrown (~se@unaffiliated/jackbrown) |
| 11:25.47 | SerajewelKS | MisterGadfly: then it *might* be eligible to be packaged in the nonfree section |
| 11:25.59 | *** join/#debian SilverWhitefish (~hidden@68-200-90-44.res.bhn.net) |
| 11:26.55 | TomTomTosch | the CE is compatible with DFSG, having the Apache 2.0 license, but as they get updated frequently and it's easy enough to get it from jetbrains directly probably nobody bothered. |
| 11:27.10 | *** join/#debian MY123 (~IceChat9@unaffiliated/kill--9-1/x-8776976) |
| 11:30.23 | *** join/#debian erre (~erre@unaffiliated/erre) |
| 11:30.35 | *** join/#debian spectie (~fran@177.72.2.81.in-addr.arpa) |
| 11:30.36 | *** join/#debian spectie (~fran@unaffiliated/spectie) |
| 11:32.20 | *** join/#debian alfred_ (~quassel@2001:470:6d:890::3a) |
| 11:34.04 | *** join/#debian bolt (r00t@unaffiliated/bolt) |
| 11:35.02 | *** join/#debian badiane (~badiane@cpe-24-193-80-159.nyc.res.rr.com) |
| 11:35.31 | *** join/#debian B[]rG (~Borg@46-150-40-173.cable.teleing.net) |
| 11:37.40 | MisterGadfly | Where should I put software that I can't find in the repos? /opt? |
| 11:37.58 | MisterGadfly | And for security purposes, should I make it owned by root? |
| 11:38.00 | *** mode/#debian [+l 1644] by debhelper |
| 11:38.32 | *** join/#debian aaro1 (~aaro@unaffiliated/xyox/x-040147) |
| 11:39.38 | TomTomTosch | i usually put it in /usr/local/bin and owned by my user. |
| 11:40.29 | MisterGadfly | Oh, moving the directories made them root. |
| 11:40.37 | MisterGadfly | So no need to make them |
| 11:42.00 | *** join/#debian davi (~davi@198.199.92.152) |
| 11:42.00 | *** join/#debian davi (~davi@gnu/davi) |
| 11:42.52 | *** join/#debian aaro (~aaro@unaffiliated/xyox/x-040147) |
| 11:44.30 | *** join/#debian stonerfish (~stonerfis@cpe-172-91-110-172.socal.res.rr.com) |
| 11:44.33 | *** join/#debian magyar (~magyar@unaffiliated/magyar) |
| 11:45.02 | *** join/#debian kunaaljain___ (~kunaaljai@106.51.31.23) |
| 11:47.59 | *** join/#debian netzfisch (~Thunderbi@x55b060b3.dyn.telefonica.de) |
| 11:48.12 | *** join/#debian sphenxes (~sphenxes@91-115-169-32.adsl.highway.telekom.at) |
| 11:49.14 | *** join/#debian teclo- (42@unaffiliated/teclo) |
| 11:50.14 | *** join/#debian Goonzu (~mojtaba@cpc1-newt35-2-0-cust3577.19-3.cable.virginm.net) |
| 11:50.41 | *** join/#debian HSKW (~HSKW@host23-198-dynamic.32-79-r.retail.telecomitalia.it) |
| 11:50.44 | HSKW | hello |
| 11:50.46 | *** join/#debian bytecounter (~mgreipl@dyndsl-037-138-005-249.ewe-ip-backbone.de) |
| 11:50.53 | *** join/#debian Akuw (~x@201.243.60.131) |
| 11:51.21 | *** join/#debian littlebear (~littlebea@CPE1cabc00e3113-CM1cabc00e3110.cpe.net.cable.rogers.com) |
| 11:52.07 | HSKW | on debian what is the correct /home/yourusername path? https://trac.ffmpeg.org/wiki/CompilationGuide/Ubuntu#Usage |
| 11:53.49 | *** join/#debian TsukiRa (~tsukira@79.170.251.152) |
| 11:54.16 | TomTomTosch | HSKW: how did you install ffmpeg? if you got it from a debian repo you don't need to give the full path. |
| 11:54.42 | HSKW | TomTomTosch: i cant use debian repo because need special fuction on ffmpeg.. and i must compile it |
| 11:54.55 | HSKW | btw... the guide install ffmpeg on special /bin... |
| 11:55.06 | *** join/#debian NeoBlaster (~N3oBl@st3r.net) |
| 11:55.08 | HSKW | what is the correct path to use with bash script? |
| 11:55.09 | TomTomTosch | HSKW: then the correct path is to whereever you put ffmpeg |
| 11:55.14 | *** join/#debian lotharkatt (~lotharkat@185.22.97.1) |
| 11:55.30 | HSKW | TomTomTosch: ~/bin ? |
| 11:55.36 | TomTomTosch | HSKW: how should we know where you put ffmpeg after compiling? |
| 11:55.44 | HSKW | see the guide... |
| 11:55.46 | HSKW | ~/bin |
| 11:56.02 | TomTomTosch | again, if you put it there, yes. |
| 11:56.12 | *** join/#debian v01t (~v01t@p4FFFC926.dip0.t-ipconnect.de) |
| 11:56.38 | HSKW | some application cant execute on this strange path... ~ |
| 11:57.06 | HSKW | i would know if is it possible to move it on standard /usr/bin or other normal path |
| 11:57.33 | *** join/#debian lucdalton (~lucdalton@90.213.71.151) |
| 11:58.01 | TomTomTosch | move the binary to /usr/local/bin if you feel like, it shouldn't make a difference. |
| 11:58.04 | *** join/#debian SpaceAce (~SpaceAce@124-150-74-135.dyn.iinet.net.au) |
| 11:58.23 | *** join/#debian rnd (~rnd@109.228.93.37) |
| 12:00.13 | TomTomTosch | if you put the binary in a place that is in echo "$PATH" you don't need to give the full path every time you call it. |
| 12:01.19 | TomTomTosch | /usr/local/bin is usually the place where one puts compiled stuff, the package manager does not touch that dir. |
| 12:01.40 | HSKW | ok better use $path... |
| 12:02.08 | HSKW | well if i launh "ffmpeg" without the full path it start |
| 12:02.12 | *** join/#debian wonderworld (~ww@ip-176-198-123-154.hsi05.unitymediagroup.de) |
| 12:02.43 | HSKW | but it start ever if i recall only "ffmpeg" on an program like nginx? |
| 12:02.59 | *** join/#debian dethos (~dethos@84.23.213.204) |
| 12:03.32 | HSKW | on some guide all exec ffmpeg with full path: /usr/bin/ffmpeg... i dont know if i write only ffmpeg on nginx it execute... i cant debug them |
| 12:04.04 | *** join/#debian tytel (~tytel@209-6-45-101.c3-0.smr-ubr1.sbo-smr.ma.cable.rcn.com) |
| 12:04.09 | TomTomTosch | type 'which git' and see what the full path is. |
| 12:05.36 | *** join/#debian corpsegrinder (~corpsegri@unaffiliated/corpsegrinder) |
| 12:06.52 | *** join/#debian jnavila (~jnavila@ita73-1-82-239-31-145.fbx.proxad.net) |
| 12:06.56 | TomTomTosch | i'm not sure how whatever language you use with nginx invoces the shell. it might be that PATH is not fully given, in which case it shouldn't be too hard to just give the full path to the binary. |
| 12:07.27 | HSKW | this is an example |
| 12:07.29 | HSKW | https://gist.github.com/Jack0r/c6d66aba1055460be519 |
| 12:07.29 | *** join/#debian brokencycle (~brokencyc@221.222.59.53) |
| 12:07.37 | simbalion | TomasCZ: I got it thanks :) |
| 12:07.47 | HSKW | look on rtmp.. exec ffmpeg -i |
| 12:07.50 | *** join/#debian maotm (~mao@81.24.87.134) |
| 12:08.00 | *** mode/#debian [+l 1651] by debhelper |
| 12:08.19 | HSKW | he invoke ffmpeg from this module... but for me dont work.. but if i invoke on bash all work |
| 12:08.24 | *** join/#debian corpsegrinder (~corpsegri@unaffiliated/corpsegrinder) |
| 12:08.57 | TomTomTosch | HSKW: then give the full path, or look into the nginx logs and see if it shows some errors. |
| 12:09.32 | *** join/#debian d0lph1n98 (~d0lph1n@124.13.247.6) |
| 12:09.35 | *** join/#debian corpsegrinder (~corpsegri@unaffiliated/corpsegrinder) |
| 12:10.56 | *** join/#debian corpsegrinder (~corpsegri@unaffiliated/corpsegrinder) |
| 12:11.55 | TomTomTosch | ^ 'which ffmpeg' it is obviously, not git. |
| 12:12.11 | *** join/#debian PETsounds (~newyork@wikipedia/girialam) |
| 12:12.34 | *** join/#debian Devastator (~devas@186.214.53.25) |
| 12:12.48 | *** join/#debian dvs (~hibbard@cwv.teksavvy.com) |
| 12:13.04 | TomTomTosch | there is also the #nginx channel. |
| 12:13.14 | *** join/#debian rimdeker (~rimdeker@unaffiliated/rimdeker) |
| 12:13.19 | *** join/#debian Devastator (~devas@unaffiliated/devastator) |
| 12:14.26 | *** join/#debian |DM| (~|DM|@93-87-210-28.dynamic.isp.telekom.rs) |
| 12:14.30 | *** join/#debian mayhew (~justin@hlfxns016cw-142068187229.dhcp-dynamic.FibreOp.ns.bellaliant.net) |
| 12:16.18 | jelly | ,v ffmpeg |
| 12:16.19 | judd | Package: ffmpeg on amd64 -- squeeze-security: 4:0.5.10-1; squeeze: 4:0.5.10-1; squeeze-security-lts: 4:0.5.10-1+deb6u1; squeeze-backports: 6:0.8.6-1~bpo60+1; wheezy: 6:0.8.17-2; wheezy-security: 6:0.8.17-2+deb7u2; jessie-backports: 7:3.0.2-2~bpo8+1; sid: 7:3.0.2-4; stretch: 7:3.0.2-4; wheezy-multimedia: 8:1.0.10-dmo1; jessie-multimedia: 10:2.6.9-dmo1; sid-multimedia: |
| 12:16.20 | judd | 10:3.0.2-dmo2 |
| 12:16.37 | jelly | oh, it's not present in jessie at all, only in backports |
| 12:21.15 | *** join/#debian skylite (~skylite@5402D6D9.dsl.pool.telekom.hu) |
| 12:22.06 | HSKW | thankss |
| 12:22.22 | HSKW | TomTomTosch: found /usr/local/bin/ffmpeg |
| 12:22.23 | HSKW | :DD |
| 12:22.39 | Devastator | I'm trying to install Debian and Windows 10 in dual boot on an SSD. I was told to create a GPT partition and then install them, am I correct to assume I just need to create GPT partition TABLE and leave the partition creation for the installers itself? |
| 12:23.46 | Goonzu | Devastator: create the partitions you want first then install windows 10 first then debian. |
| 12:24.47 | Devastator | Goonzu I've booted gparted, do you mean I need to create every partition in gparted, not just the table? |
| 12:26.05 | *** join/#debian silverhom (~silverhom@c83-252-233-107.bredband.comhem.se) |
| 12:27.44 | Goonzu | Devastator: oh I see, yeah create the GPT table and the partitions then install ur os's but I guess it would be simpler to create these partition during windows 10 installation let windows do its "funny businees" then leave enough space for your debian partition |
| 12:28.33 | Devastator | Goonzu well, let's try |
| 12:28.39 | *** part/#debian das_ (~das@45.62.224.161) |
| 12:32.01 | *** join/#debian Lionyx (~eng@187.180.151.35) |
| 12:32.45 | Lionyx | Hello! Does anybody knows a "mutt for calendar integration with gmail cal"? I mean, a textbased software that can sincronyze with google calendar. |
| 12:33.36 | *** join/#debian easyshekels (~easysheke@bzq-79-179-134-37.red.bezeqint.net) |
| 12:34.09 | *** join/#debian redd (~redd@unaffiliated/redd) |
| 12:34.11 | polyzen | khal or calcurse probably |
| 12:36.25 | HSKW | TomTomTosch: how i can watch the nginx error log? |
| 12:37.41 | TomTomTosch | HSKW: tail -f -r 500 /var/log/whateverthenginxlogis |
| 12:37.49 | *** join/#debian Ad1_RN (~Ad1_RnR@88-199-45-84.matcom.com.pl) |
| 12:37.59 | *** join/#debian joevedi (~Mutter@77-57-165-250.dclient.hispeed.ch) |
| 12:38.16 | *** join/#debian davi (~davi@gnu/davi) |
| 12:38.39 | Lionyx | polyzen: tks. also found this one https://github.com/insanum/gcalcli |
| 12:38.50 | polyzen | lol how could I forget that |
| 12:39.06 | TomTomTosch | HSKW: oops, that's -n 500 not -r 500 |
| 12:39.09 | *** join/#debian lucaswang (~lucaswang@116.216.30.13) |
| 12:39.16 | HSKW | ok TomTomTosch: ok |
| 12:39.32 | *** join/#debian lucaswang (~lucaswang@220.179.132.93) |
| 12:40.45 | *** join/#debian Guest76783 (~Sick@14.sub-70-193-172.myvzw.com) |
| 12:41.17 | *** join/#debian duoi (~duoi@unaffiliated/duoi) |
| 12:41.40 | *** join/#debian kiao2938 (~mj@p3EE25F63.dip0.t-ipconnect.de) |
| 12:42.06 | HSKW | TomTomTosch: wow some strange shit in the log!!! WOW |
| 12:42.51 | HSKW | xmlrpc!!! |
| 12:44.40 | *** join/#debian tnozyrox (~tnozyrox@unaffiliated/tnozyrox) |
| 12:46.10 | *** join/#debian edoardo (~edoardo@82.215.191.13) |
| 12:46.11 | *** join/#debian edoardo (~edoardo@unaffiliated/edoardo) |
| 12:46.48 | *** join/#debian zuzzas_ (~zuzzas@82.208.76.36) |
| 12:47.36 | Devastator | I wish there was a debian netinst installer with kernel from backports.. but I guess there isn't one.. |
| 12:48.44 | Joost | I've just upgraded to the 4.6 kernel in backports.. and now I'm getting a flickering LCD screen |
| 12:48.54 | Joost | i.e. this bug https://bugs.freedesktop.org/show_bug.cgi?id=95176 |
| 12:49.03 | Joost | any suggestions on how to proceed? |
| 12:49.40 | Devastator | any reason to use the kernel from backports? |
| 12:50.02 | abrotman | Devastator: you can create one if you have free time |
| 12:52.08 | Devastator | abrotman what do you recommend? 1- install debian from DVD-1 and download kernel from backports on another machine or 2- create a custom netinst with kernel from backports? I'm assuming I will need more things from backports along with the kernel, no? |
| 12:52.14 | *** join/#debian MisterGadfly (~MisterGad@unaffiliated/mistergadfly) |
| 12:52.36 | Joost | Devastator: newer drivers for new hardware was the initial reason |
| 12:53.12 | Devastator | Joost were the old drivers buggy or something? |
| 12:53.29 | abrotman | Devastator: depends how many times you'll use it |
| 12:53.50 | Devastator | abrotman maybe once hehe |
| 12:54.06 | *** join/#debian Mutter (~Mutter@77-57-165-250.dclient.hispeed.ch) |
| 12:54.08 | Joost | Devastator: yeah, but not this bad |
| 12:54.13 | Joost | Devastator: is there a way back? |
| 12:54.18 | *** join/#debian lucaswang (~lucaswang@14.47.125.218) |
| 12:54.31 | *** join/#debian trueneu (~noone@94.230.162.227) |
| 12:54.51 | *** join/#debian rnb_ (~Name@l49-88-77.cn.ru) |
| 12:54.54 | *** join/#debian netzfisch (~Thunderbi@x55b060b3.dyn.telefonica.de) |
| 12:55.32 | Devastator | Joost well, assuming you didn't remove the default kernel, you just reboot and choose advanced options, then you can select the old kernel, as a matter of fact you shouldn't need advanced options at all |
| 12:57.56 | *** join/#debian pseubodot (~p-dot@unaffiliated/pseubodot) |
| 12:58.00 | *** mode/#debian [+l 1644] by debhelper |
| 12:58.03 | Devastator | abrotman is this the right wiki? https://wiki.debian.org/DebianInstaller/Modify/CustomKernel |
| 12:58.03 | *** join/#debian talin (~talin@hydra.org) |
| 12:58.18 | *** join/#debian tytel (~tytel@209-6-45-101.c3-0.smr-ubr1.sbo-smr.ma.cable.rcn.com) |
| 12:59.00 | *** join/#debian mayhew (~justin@hlfxns016cw-142068187229.dhcp-dynamic.FibreOp.ns.bellaliant.net) |
| 13:00.32 | *** join/#debian jguillen (~jguillen@213.37.35.155.dyn.user.ono.com) |
| 13:00.34 | abrotman | That's one, yes |
| 13:00.43 | *** join/#debian Brigo (~Brigo@164.11.60.178.dynamic.reverse-mundo-r.com) |
| 13:01.09 | *** join/#debian SenpaiSilver (~SenpaiSil@2001:41d0:8:9411::1) |
| 13:01.11 | *** join/#debian Mutter (~Mutter@77-57-165-250.dclient.hispeed.ch) |
| 13:01.20 | *** join/#debian madmattco (~quassel@2a00:d880:5:5a6::2ab3) |
| 13:01.34 | *** join/#debian InFerNo_ (~infy@95.85.14.5) |
| 13:01.51 | *** join/#debian thunderrd (~thunderrd@110.77.173.143) |
| 13:02.22 | *** join/#debian nwmcsween (~nwmcsween@66.51.139.245.erx-static.cipherkey.com) |
| 13:02.24 | *** join/#debian electrostat (~dag@unaffiliated/electrostat) |
| 13:02.50 | *** join/#debian firztspawn (~firztspaw@unaffiliated/firztspawn) |
| 13:03.32 | *** join/#debian Brigo (~Brigo@164.11.60.178.dynamic.reverse-mundo-r.com) |
| 13:03.41 | *** join/#debian SpeccyMan (~nick@94.197.120.152.threembb.co.uk) |
| 13:03.42 | Devastator | abrotman can I check #debian-installer @ oftc or I should not bother them? |
| 13:03.57 | abrotman | you can |
| 13:04.21 | *** join/#debian AlexPortable (uid7568@gateway/web/irccloud.com/x-ghzgapqhaejhrxnk) |
| 13:06.59 | *** part/#debian pushpop (~pushpop@unaffiliated/pushpop) |
| 13:07.21 | *** join/#debian cruncher (~cruncher@unaffiliated/cruncher) |
| 13:07.22 | Devastator | abrotman also, do you happen to know from where judd get its data when you use ,pciid? |
| 13:08.00 | *** mode/#debian [+l 1652] by debhelper |
| 13:08.38 | TomTomTosch | Devastator: iirc judd is just an interface to: https://wiki.debian.org/UltimateDebianDatabase |
| 13:08.45 | *** join/#debian mayhew (~mayhew@hlfxns016cw-142068187229.dhcp-dynamic.FibreOp.ns.bellaliant.net) |
| 13:09.11 | *** join/#debian yk (~yk@unaffiliated/yk) |
| 13:09.50 | Devastator | TomTomTosch interesting, thanks! |
| 13:10.07 | *** join/#debian pkiller (~pkiller@unaffiliated/pkiller) |
| 13:11.08 | TomTomTosch | Devastator: here are more details about the pciid command: http://ircbots.debian.net/judd/#piccy-pciid |
| 13:11.44 | *** join/#debian lotharkatt (~lotharkat@194.61.48.251) |
| 13:12.40 | *** join/#debian Queenslayer (~Queenslay@78.157.207.144) |
| 13:14.02 | Devastator | TomTomTosch even better, I just didn't understand the modules.pcimap |
| 13:14.41 | *** join/#debian robotroll (~robotroll@unaffiliated/robotroll) |
| 13:15.18 | *** join/#debian LambdaCalculus37 (~robert@pool-108-53-0-60.nwrknj.fios.verizon.net) |
| 13:15.25 | *** join/#debian mayhew (~mayhew@hlfxns016cw-142068187229.dhcp-dynamic.FibreOp.ns.bellaliant.net) |
| 13:16.04 | *** join/#debian ki0 (~ki0@134.red-2-137-147.dynamicip.rima-tde.net) |
| 13:18.21 | *** join/#debian cuechan (~paul@x55b09401.dyn.telefonica.de) |
| 13:19.39 | smoutz | Why debian chose systemd ? |
| 13:20.08 | *** join/#debian hasanatizaz2 (~hasan@39.50.143.221) |
| 13:20.36 | TomTomTosch | Devastator: tbh, i think that part is outdated since jessie. not sure about that. |
| 13:21.05 | mayhew | smoutz: https://wiki.debian.org/Debate/initsystem/systemd |
| 13:21.28 | *** join/#debian lamer211 (~lame@2a00:a960:1002::234) |
| 13:21.34 | Devastator | TomTomTosch thank you, I thought about giving some feedback on that, but I don't think it worth heheh |
| 13:21.37 | *** join/#debian markybob (~markybob@unaffiliated/markybob) |
| 13:21.38 | *** join/#debian gm152 (~glen@unaffiliated/ridout) |
| 13:23.01 | *** join/#debian p3rs3us (~jduro@host86-177-56-53.range86-177.btcentralplus.com) |
| 13:24.48 | abrotman | Devastator: the drivers themselves probably |
| 13:24.51 | *** join/#debian electrostat (~dag@unaffiliated/electrostat) |
| 13:24.52 | smoutz | Why debian doesn't want to comply with the fsf guidelines for free software distros ? |
| 13:25.21 | *** join/#debian cypherman (~santiago@r186-48-90-66.dialup.adsl.anteldata.net.uy) |
| 13:26.03 | *** join/#debian edwinpaixao (~edwin@191.201.144.103) |
| 13:26.11 | Devastator | abrotman I see, it seems to check modules.pcimap in jessie-backports as well, the driver for my ethernet card is there, yet ,pciid gives a bogus result.. |
| 13:26.16 | edwinpaixao | bom dia senhores |
| 13:26.38 | neskau | bom dia! |
| 13:26.47 | edwinpaixao | como estão? |
| 13:26.47 | TomTomTosch | smoutz: you can read the debian free software guidelines in the social contract https://www.debian.org/social_contract.en.html |
| 13:26.48 | Devastator | abrotman I just thought about reporting it to someone, but as somiaj_ said, I should just move on hehe |
| 13:26.56 | Devastator | edwinpaixao english only |
| 13:27.20 | *** join/#debian NiLon (nilon@unaffiliated/nilon) |
| 13:27.34 | HSKW | TomTomTosch: found all logs... but a question: there are max size log or are till space over? |
| 13:27.34 | smoutz | TomTomTosch: That doesn't answer my question. My question is why they keep having non-free repos and thus as a result not having fsf endorsement |
| 13:27.52 | markybob | because it's fucking useful sometimes |
| 13:28.00 | *** mode/#debian [+l 1661] by debhelper |
| 13:28.43 | smoutz | markybob: are you answering to me ? |
| 13:28.47 | markybob | yes |
| 13:28.56 | TomTomTosch | smoutz: because debian wants to give the user the choice to use non-free software if they wish to. free software is the defaul though. |
| 13:29.31 | smoutz | Right |
| 13:29.38 | *** join/#debian sasukeskapa (~sasukeska@catv-176-63-154-152.catv.broadband.hu) |
| 13:29.42 | markybob | non-free firmware is essential for an awful lot of machines, for example |
| 13:30.00 | sypher | I don't give a damn about FSF endorsement. I care about function. I'm sure many Debian users and maintainers agree. |
| 13:30.10 | HSKW | smoutz: like me.. i need codec like libaac lamemp3... this is not GPL compilat and you must compile it from scratch |
| 13:30.20 | smoutz | HSKW yeah |
| 13:30.38 | TomTomTosch | and so everyone can devide if they want to go the free route or not. yay, choice. |
| 13:30.38 | *** join/#debian Almtesh (~Almtesh@unaffiliated/almtesh) |
| 13:31.00 | TomTomTosch | s/devide/decide damn fat fingers. |
| 13:31.08 | *** join/#debian mangas (uid168018@gateway/web/irccloud.com/x-fztumuammjbatszb) |
| 13:31.22 | markybob | TomTomTosch: you're fired :P |
| 13:31.27 | HSKW | TomTomTosch: my prof. said: GPL is like a virus.. if u use it code from GPL lic. you must "infect" all your code with GPL lic |
| 13:31.35 | TomTomTosch | markybob: do i get a payout? |
| 13:32.16 | HSKW | smoutz: my prof. said: GPL is like a virus.. if u use any code from GPL lic source. you must "infect" all your code with GPL lic |
| 13:32.18 | HSKW | :D |
| 13:32.23 | mayhew | I think Debian takes the best practical stance. Use `main` only if you care about using an entirely FSF-compliant distro. Contrib and non-free are much appreciated coming from Fedora where you have to add "third party" stuff like RPMFusion which is honestly a mess compared to Debian. |
| 13:32.26 | markybob | your professor is a moron |
| 13:32.52 | HSKW | markybob: i know :d |
| 13:32.56 | *** join/#debian murfjr (~douseiais@185.21.216.185) |
| 13:33.42 | *** join/#debian bhuvi (~bhuvi@117.202.149.76) |
| 13:33.44 | HSKW | If we are here it is only thanks GPL GNU |
| 13:33.54 | hicksd | next time he says that, point out that amazon use it perfectly well without opening up the code for their kindles beyond the base layer kernel changes. |
| 13:34.27 | hicksd | and that he's over simplfying things :) |
| 13:34.35 | HSKW | but... any help with nginx log... on debian all log on /var/log are cleaned after reboot? or still remain till space over? |
| 13:35.25 | markybob | so they're not "cleaned" if you mean deleted. they're rotated |
| 13:35.29 | TomTomTosch | HSKW: the -n option limits the number of lines. leave it out and tail will display the whole file. |
| 13:35.44 | *** join/#debian Makaveli7 (~emir@46.197.149.93) |
| 13:36.01 | smoutz | Could Debian do more to become more user friendly than Ubuntu ? |
| 13:36.09 | HSKW | rotated? well all log not fill all my hdd space? |
| 13:36.20 | sypher | If ubuntu is considered user-friendly, then no thank you. |
| 13:36.22 | markybob | that does happen sometimes |
| 13:36.48 | *** join/#debian ravegen (~androirc@203.215.116.129) |
| 13:37.02 | HSKW | markybob: i use nginx log, the friends tomtomtosch asked me how to watch but are a lot of line... i suppose that some day this log eat all my hdd space |
| 13:37.12 | *** part/#debian edwinpaixao (~edwin@191.201.144.103) |
| 13:37.20 | sypher | HSKW: How long rotated logs are retained is configurable. |
| 13:37.28 | markybob | HSKW: sure. if you don't pay attention and move the rotated logs elsewhere |
| 13:37.36 | sypher | Or that. |
| 13:37.53 | markybob | an admin shouldn't ever just delete logs. that's crazy |
| 13:37.57 | markybob | never* |
| 13:38.11 | *** join/#debian shingouz (~doowop@80-186-68-142.elisa-mobile.fi) |
| 13:38.21 | *** join/#debian hyfrehyfre (~hyfrehyfr@static-186-121-228-171.acelerate.net) |
| 13:38.22 | markybob | damnit i'm firing myself. can't type |
| 13:38.22 | HSKW | i've only this line on nginx conf: access_log /var/log/nginx_access.log combined; |
| 13:38.22 | HSKW | <PROTECTED> |
| 13:38.38 | sypher | Uh, no, that's not crazy at all. But okay. |
| 13:39.39 | markybob | hell why have them at all if you're just going to delete them |
| 13:39.49 | *** join/#debian MoonkYang (~moonkyang@208.64.31.205) |
| 13:39.56 | markybob | i'd be fired in an instant |
| 13:40.03 | HSKW | sypher: well the /var/log/ is maintained by operating system? |
| 13:40.22 | sypher | There's a time horizon beyond which logs are of no further use. A logfile from, say, four years ago isn't useful to me for anything. |
| 13:40.46 | HSKW | maintained to say rotation or avoid space eating space |
| 13:40.49 | HSKW | ? |
| 13:40.52 | markybob | not really. sometimes hacks go unnoticed for years |
| 13:41.39 | markybob | HSKW: i always just rotate and move to NAS or whatever you have |
| 13:41.59 | sypher | markybob: K. |
| 13:42.58 | HSKW | markybob: okay good, the i must create a cron script that copy on the hdd log only the current log and empty the /var/log |
| 13:43.20 | HSKW | this is mean ROTATE, right? |
| 13:43.53 | markybob | https://wiki.archlinux.org/index.php/Logrotate |
| 13:45.24 | *** join/#debian bhuvi (~bhuvi@117.202.149.76) |
| 13:45.52 | HSKW | markybob: THANKS, more simple to say that rates |
| 13:45.58 | *** part/#debian ravegen (~androirc@203.215.116.129) |
| 13:46.23 | *** join/#debian galex|713 (~galex-713@static-176-158-131-7.ftth.abo.bbox.fr) |
| 13:46.31 | sypher | HSKW: A lot of your space consumption worries are mitigated by the fact that logrotate can compress the not-current log. |
| 13:46.36 | *** join/#debian aaro (~aaro@unaffiliated/xyox/x-040147) |
| 13:46.45 | *** join/#debian theviajerock (~victor@cable201-232-160-169.epm.net.co) |
| 13:47.22 | *** join/#debian Kain (~Kain@96.84.121.61) |
| 13:48.24 | HSKW | sypher: yeah this is very important... logfile on server that run apache/nginx are very dangerous... |
| 13:48.35 | HSKW | if is not manage correctly |
| 13:49.50 | *** join/#debian bhuvi (~bhuvi@117.202.149.76) |
| 13:50.51 | *** join/#debian Lokke (~Thunderbi@ip5f5ad252.dynamic.kabel-deutschland.de) |
| 13:52.23 | *** join/#debian tytel (~tytel@209-6-45-101.c3-0.smr-ubr1.sbo-smr.ma.cable.rcn.com) |
| 13:59.02 | *** join/#debian aaro (~aaro@unaffiliated/xyox/x-040147) |
| 14:01.32 | *** join/#debian enki (~enki@dynamic-78-30-156-27.adsl.eunet.rs) |
| 14:02.27 | *** join/#debian aaro (~aaro@unaffiliated/xyox/x-040147) |
| 14:02.33 | *** join/#debian davi (~davi@198.199.92.152) |
| 14:02.33 | *** join/#debian davi (~davi@gnu/davi) |
| 14:02.39 | *** join/#debian lucdalton (~lucdalton@2a02:c7d:b7d9:5c00:d965:bc2b:c192:78b5) |
| 14:03.43 | *** join/#debian bemawi (~bemawi@2a01:e35:8b48:4200:3ced:a248:f2cc:c98d) |
| 14:03.44 | *** join/#debian relox (~weechat@aftr-88-217-181-153.dynamic.mnet-online.de) |
| 14:04.12 | *** join/#debian Voovode (~Alex@46.198.241.1) |
| 14:04.19 | *** join/#debian Mutter (~Mutter@77-57-165-250.dclient.hispeed.ch) |
| 14:05.02 | *** join/#debian plaxi (~plaxi@81-225-0-145-no185.bredband.skanova.com) |
| 14:07.56 | *** join/#debian sondr3 (~sondr3@cm-84.213.195.133.getinternet.no) |
| 14:12.59 | *** join/#debian fearnothing (~nothing@unaffiliated/fearnothing) |
| 14:13.40 | *** join/#debian cybrNaut (cybrNaut@2001:0:53aa:64c:2437:4113:bcca:66c4) |
| 14:13.40 | *** join/#debian mr_daemon (~supernaut@2001:470:1d:47e:dead:beef:100:9d94) |
| 14:14.34 | *** join/#debian PlasmaStar (Plasma@unaffiliated/plasmastar) |
| 14:16.17 | *** join/#debian eSa| (~esa@host167-169-dynamic.50-82-r.retail.telecomitalia.it) |
| 14:17.38 | *** join/#debian D-Boy (~D-Boy@unaffiliated/cain) |
| 14:17.52 | *** join/#debian superusr (~usr@p5B246B51.dip0.t-ipconnect.de) |
| 14:19.33 | *** join/#debian Lionyx (~eng@187.180.151.35) |
| 14:20.28 | *** join/#debian chuugar (~chuugar@218-204-190-109.dsl.ovh.fr) |
| 14:20.34 | *** join/#debian s4ndm4n (~sandman@unaffiliated/sandman13) |
| 14:20.54 | *** join/#debian AvatarA (~avatara@unaffiliated/avatara) |
| 14:22.07 | *** join/#debian wildlander (~wild@unaffiliated/wildlander) |
| 14:22.55 | *** join/#debian wildlander (~wild@unaffiliated/wildlander) |
| 14:23.00 | *** join/#debian MaBunny (~Peter@117.194.212.213) |
| 14:24.46 | *** part/#debian lamer211 (~lame@2a00:a960:1002::234) |
| 14:25.21 | *** join/#debian Tom01 (~tom@p5DDFF9DC.dip0.t-ipconnect.de) |
| 14:25.26 | *** join/#debian MisterGadfly (~MisterGad@unaffiliated/mistergadfly) |
| 14:26.04 | *** join/#debian refusist (~bax@80-62-117-142-mobile.dk.customer.tdc.net) |
| 14:26.16 | MisterGadfly | I want to store my /tmp in my RAM. I know how to mount it with fstab, but how can I remove all of the files in it before mounting it? |
| 14:26.18 | *** join/#debian jt_ (~jt@ip-83-134-122-77.dsl.scarlet.be) |
| 14:26.33 | *** join/#debian jnavila (~jnavila@2a01:e35:2ef1:f910:86a6:c8ff:fe05:d3e0) |
| 14:27.26 | *** join/#debian cdown (~cdown@199.201.66.3) |
| 14:28.26 | mayhew | MisterGadfly: you probably should just restart if you can, a program running might rely on those files. You could rm -rf it if you're feel like "risking" it. |
| 14:28.50 | *** join/#debian ER_nesto (~ER_nesto@2e41edeb.skybroadband.com) |
| 14:29.37 | MisterGadfly | mayhew: but after I mount "on top of it", the previous files and directories are still there |
| 14:30.14 | *** join/#debian biberu (~biberu@c-93d371d5.08-441-7570702.cust.bredbandsbolaget.se) |
| 14:30.51 | *** join/#debian Voovode (~Alex@46.198.241.1) |
| 14:32.00 | *** join/#debian TheCoffeMaker (~TheCoffeM@186.136.217.118) |
| 14:32.01 | *** join/#debian TheCoffeMaker (~TheCoffeM@unaffiliated/thecoffemaker) |
| 14:32.07 | *** join/#debian MaBunny (~Peter@117.194.212.213) |
| 14:32.33 | *** join/#debian thunderrd (~thunderrd@110.77.173.143) |
| 14:33.28 | MisterGadfly | Seems like the rm worked, mayhew |
| 14:35.02 | mayhew | nice :) I recently did the same thing myself, surprised it's not the default (but then again Debian is pretty conservative) |
| 14:35.49 | *** join/#debian SuperTramp83 (~gnu@5.79.86.129) |
| 14:36.42 | *** join/#debian corpsegrinder (~corpsegri@unaffiliated/corpsegrinder) |
| 14:37.05 | *** join/#debian GG (~GitGud@unaffiliated/gitgud) |
| 14:37.06 | *** join/#debian Voovod3 (~Alex@178-56-203.dynamic.cyta.gr) |
| 14:37.56 | *** join/#debian ER_nesto (~ER_nesto@2e41edeb.skybroadband.com) |
| 14:39.05 | *** join/#debian oish (~charlie@host86-187-163-52.range86-187.btcentralplus.com) |
| 14:40.39 | *** join/#debian corpsegrinder (~corpsegri@unaffiliated/corpsegrinder) |
| 14:40.59 | *** join/#debian Ricardo__ (~rick@unaffiliated/ricardo--/x-7903455) |
| 14:41.15 | *** join/#debian corpsegrinder (~corpsegri@unaffiliated/corpsegrinder) |
| 14:41.37 | *** join/#debian jnavila (~jnavila@ita73-1-82-239-31-145.fbx.proxad.net) |
| 14:41.45 | *** join/#debian butterly_crumpet (~butterly_@c-50-139-33-21.hsd1.or.comcast.net) |
| 14:41.58 | *** join/#debian MisterGadfly (~MisterGad@unaffiliated/mistergadfly) |
| 14:46.10 | *** join/#debian gchristensen (~gchristen@unaffiliated/grahamc) |
| 14:46.28 | *** join/#debian tytel (~tytel@209-6-45-101.c3-0.smr-ubr1.sbo-smr.ma.cable.rcn.com) |
| 14:46.43 | gchristensen | Hi, I'm trying to find the various patches applied to acpitool 0.5.1 and am not really sure where to look, as http://sources.debian.net/patches/acpitool/ has no links. anyone know where i can find them? |
| 14:46.47 | *** join/#debian efdetonator (~efdetonat@179.182.10.38) |
| 14:47.02 | *** join/#debian zarath (~holger@xdsl-89-1-49-162.netcologne.de) |
| 14:47.23 | zarath | hi there |
| 14:47.52 | zarath | went something wrong with the latest testing updates? |
| 14:48.31 | zarath | many packages are no longer available and have broken dependencies |
| 14:48.54 | mayhew | gchristensen: using `apt-get source pkg-name` will download the entire package source, including Debian-patches AFAIK |
| 14:50.06 | *** join/#debian shootbird (~quassel@beepbeep.serverpit.com) |
| 14:50.35 | TomTomTosch | well, the weather forecast for testing says sunny with no uninstallable packages on amd64. https://qa.debian.org/dose/debcheck/testing_main/index.html |
| 14:50.48 | *** join/#debian denisk (~denisk@60.225.173.162) |
| 14:50.59 | TomTomTosch | zarath: but maybe you should take your problem to #debian-next on irc.oftc.net |
| 14:51.27 | *** join/#debian I_Am_Kain (~Kain@96.84.121.61) |
| 14:52.34 | TomTomTosch | s/no/very few/ |
| 14:55.06 | zarath | strange. perhaps just broken mirrors |
| 14:55.19 | *** join/#debian MoonkYang (~moonkyang@208.64.31.205) |
| 14:56.07 | *** part/#debian zarath (~holger@xdsl-89-1-49-162.netcologne.de) |
| 14:56.33 | *** join/#debian olegfusion (~olegfusio@mail.mobileforsale.ru) |
| 15:00.08 | *** join/#debian krytarik (~krytarik@xebian/developer/krytarik) |
| 15:00.26 | *** join/#debian google77 (~zmaj@93-139-137-129.adsl.net.t-com.hr) |
| 15:00.31 | *** join/#debian ven00m (~ven00m@39-53-134-95.pool.ukrtel.net) |
| 15:01.11 | google77 | So, is it already possible to update the kernel without rebooting?(not neccessarily on debian though) |
| 15:01.28 | *** join/#debian Otani (~Yukiteru@unaffiliated/yukiteru) |
| 15:01.46 | *** join/#debian cuechan_ (~paul@x55b08bc3.dyn.telefonica.de) |
| 15:03.45 | *** join/#debian frangor (~frangor@unaffiliated/frangor) |
| 15:04.23 | *** join/#debian lucdalton (~lucdalton@2a02:c7d:b7d9:5c00:d965:bc2b:c192:78b5) |
| 15:06.15 | *** join/#debian trobotham (nitemare@bnc.ku.cx) |
| 15:06.25 | gchristensen | google77: yeah |
| 15:06.44 | *** join/#debian dionysus69 (~Icedove@unaffiliated/dionysus69) |
| 15:06.56 | google77 | cool...uptime is love, uptime is life :P |
| 15:08.00 | *** mode/#debian [+l 1667] by debhelper |
| 15:09.21 | *** join/#debian lucaswan_ (~lucaswang@114.111.166.13) |
| 15:09.54 | *** join/#debian Anwarias (~quassel@xdsl-89-0-17-82.netcologne.de) |
| 15:09.57 | *** join/#debian d0lph1n98 (~d0lph1n@124.13.247.6) |
| 15:10.20 | *** join/#debian aZz7eCh (~aZz7eCh@unaffiliated/azz7ech) |
| 15:10.39 | *** join/#debian AngelDeath (~AngelDeat@190.201.226.177) |
| 15:11.22 | *** join/#debian iiaann (~ian@cpc76508-clyd5-2-0-cust137.14-1.cable.virginm.net) |
| 15:11.48 | *** join/#debian SuperTramp83_ (~gnu@5.79.86.129) |
| 15:12.21 | *** join/#debian GeorgeJipa (~admin@5-12-45-100.residential.rdsnet.ro) |
| 15:12.21 | *** join/#debian GeorgeJipa (~admin@unaffiliated/georgejipa) |
| 15:12.46 | *** join/#debian cyborg-one (~cyborg-on@188-115-151-213.broadband.tenet.odessa.ua) |
| 15:12.48 | *** join/#debian derstrom (~derstrom@92.67.112.87.dyn.plus.net) |
| 15:13.48 | *** join/#debian tytel (~tytel@209-6-45-101.c3-0.smr-ubr1.sbo-smr.ma.cable.rcn.com) |
| 15:14.17 | *** join/#debian r1v3n (~r1v3n@198.50.245.89) |
| 15:14.17 | *** join/#debian Immanuel (~Manu@2.236.139.163) |
| 15:14.20 | *** join/#debian diniwed (~gavron@ool-45746e24.dyn.optonline.net) |
| 15:14.58 | *** join/#debian ScutulatIum (~scutulati@24.171.220.82) |
| 15:17.15 | *** join/#debian alexandr1 (~alexandro@unaffiliated/alexandros-c/x-1684531) |
| 15:18.00 | *** mode/#debian [+l 1675] by debhelper |
| 15:20.01 | *** join/#debian ragedragon (~ragedrago@hus54-1-78-214-148-27.fbx.proxad.net) |
| 15:20.02 | *** join/#debian Orbitrix (~Huevos@c-76-127-14-226.hsd1.nm.comcast.net) |
| 15:20.22 | *** join/#debian Orbitrix (~Huevos@c-76-127-14-226.hsd1.nm.comcast.net) |
| 15:21.15 | *** join/#debian I_Am_Kain (~Kain@96.84.121.61) |
| 15:22.48 | *** join/#debian alexandros_c (~alexandro@unaffiliated/alexandros-c/x-1684531) |
| 15:23.02 | *** join/#debian rosten (~rosten@cpe-45-48-9-161.socal.res.rr.com) |
| 15:24.35 | *** join/#debian Queenslayer (~Queenslay@78.157.207.144) |
| 15:24.53 | *** join/#debian timahvo1 (~rogue@197.237.174.52) |
| 15:25.56 | *** join/#debian Scourje (uid63311@gateway/web/irccloud.com/x-wkygdggufcsfgxvp) |
| 15:29.31 | *** join/#debian likevinyl (~freebeer@unaffiliated/likevinyl) |
| 15:30.11 | Devastator | ,kernels] |
| 15:30.19 | Devastator | ,kernels |
| 15:30.20 | judd | Available kernel versions are: experimental: 4.7.0-rc4-686-pae (4.7~rc4-1~exp1); sid: 4.6.0-1-686 (4.6.2-2); stretch: 4.6.0-1-686 (4.6.1-1); jessie-backports: 4.6.0-0.bpo.1-686-pae (4.6.1-1~bpo8+1); jessie: 3.16.0-4-686-pae (3.16.7-ckt25-2); wheezy-backports: 3.16.0-0.bpo.4-686-pae (3.16.7-ckt25-2~bpo70+1); wheezy: 3.2.0-4-686-pae (3.2.81-1) |
| 15:32.33 | *** join/#debian mtn (~mtn@72.168.160.38) |
| 15:33.13 | *** join/#debian _Sys5_ (~Stereo@a79-169-217-173.cpe.netcabo.pt) |
| 15:33.26 | *** join/#debian MisterGadfly (~MisterGad@unaffiliated/mistergadfly) |
| 15:33.45 | MisterGadfly | Why is Eclipse IDE so old, even in unstable? What the hell? |
| 15:34.16 | _Sys5_ | Hi, For some odd reason mouse disapears when you click on terminal window. any ideas? |
| 15:34.48 | MisterGadfly | This is bullshit |
| 15:35.18 | *** join/#debian bp0 (~bp@unaffiliated/bp0) |
| 15:35.27 | _Sys5_ | not much luck with update-alternatives -config x-cursor-theme |
| 15:37.50 | TomTomTosch | MisterGadfly: that bullshit is probably due to a lack of manpower. are you free to help out if you feel so strongly about it. |
| 15:38.02 | TomTomTosch | * you are |
| 15:38.12 | MisterGadfly | TomTomTosch: freaking Eclipse? A very popular IDE? |
| 15:38.25 | *** join/#debian Almtesh (~Almtesh@unaffiliated/almtesh) |
| 15:38.54 | _Sys5_ | so, no1 experienced this before? |
| 15:39.07 | *** join/#debian vgo (~OS-21482@213.37.210.229.dyn.user.ono.com) |
| 15:39.24 | *** join/#debian Orbitrix (~Huevos@c-76-127-14-226.hsd1.nm.comcast.net) |
| 15:39.41 | cyphix | is there a version of the debian usb installer that allows to test debian before installing it? |
| 15:39.45 | mayhew | MisterGadfly: you can also get it from the Eclipse website if you want an up-to-date version |
| 15:39.55 | *** join/#debian Orbitrix (~Huevos@c-76-127-14-226.hsd1.nm.comcast.net) |
| 15:40.01 | MisterGadfly | mayhew: that's what I'm doing, but an updated version should be in the repos |
| 15:40.02 | mayhew | cyphix: yes, there's live images |
| 15:40.16 | mayhew | cyphix: https://www.debian.org/CD/live/ |
| 15:40.28 | *** part/#debian vgo (~OS-21482@213.37.210.229.dyn.user.ono.com) |
| 15:41.31 | mayhew | MisterGadfly: https://www.reddit.com/r/debian/comments/3biz4i/why_does_eclipse_ide_not_get_updated_in_debian/ |
| 15:41.42 | TomTomTosch | MisterGadfly: yeah, freaking eclipse, if not many cared about the version in stable. |
| 15:41.44 | mayhew | Like TomTomTosch said, it's a manpower/interest issue it seems. |
| 15:41.51 | _Sys5_ | ok cool |
| 15:42.27 | mayhew | I don't think many Debian people use/like Java, I know a lot of people prefer IntelliJ or lightweight editors. |
| 15:42.57 | TomTomTosch | which use java as well :P |
| 15:43.29 | TomTomTosch | but those don't have active packages either. i guess it's because people want the up to date version. |
| 15:43.42 | mayhew | TomTomTosch: yeah, but I believe most of the Java community has moved on from Eclipse to IntelliJ.. Even Android Studio is based on it. |
| 15:44.03 | TomTomTosch | mayhew: i'd agree. |
| 15:44.37 | *** join/#debian aaro1 (~aaro@unaffiliated/xyox/x-040147) |
| 15:44.57 | cyphix | mayhew: Ok thank you! |
| 15:45.18 | MisterGadfly | I do use IntelliJ, but I sometimes need Eclipse |
| 15:46.43 | *** join/#debian VlijmenFileer (~vlijmenfi@li865-150.members.linode.com) |
| 15:46.46 | *** join/#debian f10 (~flo@77.87.48.191) |
| 15:48.56 | *** join/#debian f10_ (~flo@2001:470:52af:1:1015:ab7e:f808:4213) |
| 15:49.00 | *** join/#debian Antimattercarp (~Carp@2601:49:c302:560:9105:2e75:802f:c9b5) |
| 15:49.00 | *** join/#debian Tetrazene (~Carp@2601:49:c302:560:9105:2e75:802f:c9b5) |
| 15:50.01 | *** join/#debian I_Am_Kain (~Kain@96.84.121.61) |
| 15:51.04 | *** join/#debian aaro1 (~aaro@unaffiliated/xyox/x-040147) |
| 15:51.10 | *** join/#debian jolt (jolt@0x2a.se) |
| 15:51.49 | *** join/#debian qqz (~qqz@91-115-2-115.adsl.highway.telekom.at) |
| 15:52.00 | qqz | if I start firefox fromout of a kde session everything is scaled abnormally large |
| 15:52.09 | qqz | sicne I have used a higher dpi value to scale things right for the KDE plasma desktop |
| 15:52.19 | qqz | however that settings is needed for the KDE desktop only |
| 15:52.31 | qqz | firefox should behave the same when started fromout of a gnome session as when started fromout of a KDE plasma session |
| 15:52.42 | qqz | at least this is what I want |
| 15:52.48 | *** join/#debian _0bitcount (~Big_Byte@92.176.142.156) |
| 15:52.50 | qqz | anyone her who can help? |
| 15:52.58 | qqz | <PROTECTED> |
| 15:53.06 | qqz | what is the magic that makes firefox scale its screen appearance and its menus |
| 15:53.43 | Epakai | about:config layout.css.devPixelsPerPx |
| 15:54.04 | *** join/#debian lucdalton (~lucdalton@2a02:c7d:b7d9:5c00:d965:bc2b:c192:78b5) |
| 15:54.10 | *** join/#debian f10__ (~flo@2001:470:52af:1:3486:2bfb:3ad8:aef1) |
| 15:54.53 | qqz | ok; if set to one then everything is the same between gnome and kde |
| 15:55.23 | *** join/#debian olegfusion (~olegfusio@mail.mobileforsale.ru) |
| 15:55.48 | qqz | hope that will be o.kj. also when I wanna do some webdev |
| 15:56.40 | qqz | anyone here who knows what layout.css.dpi is |
| 15:57.03 | qqz | may I change the em/ex - value without affecting the px-values? |
| 15:57.22 | qqz | what if that parameter is non-zero? |
| 15:57.43 | *** join/#debian MisterGadfly (~MisterGad@unaffiliated/mistergadfly) |
| 15:58.07 | MisterGadfly | Ok, this is stupid. Whenever I create a new tmux pane, my .zprofile gets sourced, but when I try to make it source after logging in, it doesn't |
| 15:58.12 | MisterGadfly | What am I doing wrong? |
| 15:58.45 | *** join/#debian mambaw (~mambaw@2601:249:0:283b:3040:e16d:a5c5:8d75) |
| 15:59.25 | *** join/#debian Mutter_ (~Mutter@77-57-165-250.dclient.hispeed.ch) |
| 15:59.28 | *** join/#debian hasanatizaz2 (~hasan@39.50.243.21) |
| 16:00.04 | *** join/#debian smev81 (~smev@dyndsl-092-252-019-208.ewe-ip-backbone.de) |
| 16:02.35 | *** join/#debian lacsap_ (~lacsap@modemcable071.26-83-70.mc.videotron.ca) |
| 16:02.47 | *** join/#debian Lionyx (~eng@187.180.151.35) |
| 16:03.47 | *** join/#debian Mutter_ (~Mutter@77-57-165-250.dclient.hispeed.ch) |
| 16:03.48 | Lionyx | Hi! Is there any how use xinit /usr/bin/libreoffice -args and set an arg to height and width? I usually do it with chrome and firefox, but I can't seem to find an option for libreoffice. Is there any how make xinit force it? tks |
| 16:04.06 | *** join/#debian LtL (~irssi@unaffiliated/ltl) |
| 16:04.42 | qqz | Lionyx: I think you should start a window maanger to do so first |
| 16:04.53 | qqz | and not start libreoffice directly via xinit |
| 16:05.15 | qqz | start an xterm and invoke there kwin & lowriter & |
| 16:05.35 | *** join/#debian afernandez_ (~afernande@c-73-215-118-7.hsd1.nj.comcast.net) |
| 16:05.42 | qqz | and set the default width and height of the libreoffice window in the kwin setttings dialogue for specific windows |
| 16:06.09 | qqz | or invoke kwin & libreoffice fromout of a bash script if you need that often |
| 16:06.16 | *** join/#debian alvesadrian (~adrian@190.19.69.202) |
| 16:07.12 | smev81 | when i try to filter for apps that depend on gtk2 in synaptic it wont let me. If I revisit the filter configuration it is set to "NOT depend" instead of "depend". Did you have similar problems and found a workaround? |
| 16:07.21 | *** join/#debian YBook (~youri@541AB605.cm-5-3c.dynamic.ziggo.nl) |
| 16:11.31 | *** join/#debian Sucks (~sucks@2804:7f1:2080:8eae:a891:779c:16a0:ce04) |
| 16:11.36 | smev81 | I started aptitude which has a view for that, nevermind |
| 16:13.04 | *** join/#debian d-fence_ (~quassel@host-85-201-64-140.dynamic.voo.be) |
| 16:13.20 | *** join/#debian I_Am_Kain (~Kain@96.84.121.61) |
| 16:13.59 | *** join/#debian Martyn (~Martyn@cpe-24-242-68-74.austin.res.rr.com) |
| 16:14.15 | *** join/#debian cyborg-one (~cyborg-on@188-115-136-64.broadband.tenet.odessa.ua) |
| 16:14.30 | *** join/#debian linuxfool (~james@71-45-66-171.res.bhn.net) |
| 16:15.43 | *** join/#debian hR13_ (~hR13@h-217-22.a357.priv.bahnhof.se) |
| 16:16.13 | *** join/#debian BernhardPosselt (~bernhard@2a02:8388:7000:ab80:22cf:30ff:fe6e:fadb) |
| 16:16.35 | BernhardPosselt | where should your custom nginx config go? /etc/nginx/sites-enabled/default ? |
| 16:17.26 | *** join/#debian relox (~weechat@aftr-88-217-181-153.dynamic.mnet-online.de) |
| 16:17.34 | *** join/#debian jackbrown (~se@unaffiliated/jackbrown) |
| 16:18.27 | *** join/#debian Tiffon (~name@unaffiliated/tiff0n) |
| 16:19.32 | *** join/#debian Tetrazene (~Carp@2601:49:c302:560:9105:2e75:802f:c9b5) |
| 16:20.21 | DoctorD90 | Hi guys! Little issue...I got a Usb14gb drive...it must have some bad sector because I find out some corrupted file. I runned e2fsck, but it give 0 errors. I create thousand copies of a 10megabyte file, hashed them, and I find out 4-5 corrupted copies, so it has to exist bad sectors! ... |
| 16:20.23 | *** join/#debian diniwed (~gavron@ool-45746e24.dyn.optonline.net) |
| 16:20.24 | *** join/#debian slowmatt (~matt@c-98-213-36-145.hsd1.il.comcast.net) |
| 16:20.29 | mayhew | BernhardPosselt: it's entirely up to you, but the "Debian way" if you're hosting more than 1 site is to add files to /etc/nginx/sites-available and symlink them to /etc/nginx/sites-enabled if you want them to be enabled. |
| 16:20.37 | DoctorD90 | now im using directly badblocks, but it also gives 0 errors.... |
| 16:20.42 | BernhardPosselt | mayhew: ty |
| 16:20.43 | DoctorD90 | any idea? |
| 16:21.00 | *** join/#debian lucdalton (~lucdalton@2a02:c7d:b7d9:5c00:4d29:a216:354b:1b92) |
| 16:21.16 | unborn | DoctorD90: corrupted files does not mean bad sectors.. |
| 16:21.29 | DoctorD90 | unborn, and what they can mean? |
| 16:21.53 | unborn | DoctorD90: they are corrupted files.. heh it can happen anywhere.. |
| 16:22.05 | DoctorD90 | mainly it starts to give me corrupted files, after i go trougth airport checkpoint with Xray.... |
| 16:22.36 | unborn | DoctorD90: I usually got corrupted files when in windows scanning usb is clicked.. < that is just example |
| 16:22.39 | unborn | *for |
| 16:23.05 | DoctorD90 | unborn, i copied one 10mega file, 1373 times. I hashed them, and find out 4-5 files corrupted. I repeated this test, and I find out SAME numbered files corrupted :P |
| 16:23.52 | DoctorD90 | dd if=/dev/urandom of=Desktop/file bs=1M count=10 |
| 16:24.01 | unborn | DoctorD90: its still does not mean that you must have bad sectors on your ssd, hdd, usbdisk |
| 16:24.27 | *** join/#debian electro33 (uid613@gateway/web/irccloud.com/x-ibsvzgtqarxoluqm) |
| 16:24.30 | DoctorD90 | i created 1373 copies of that file on the usbstick, and for 4-5 files, hash doesnt match |
| 16:24.38 | unborn | if usb disk is low quality than it can occur |
| 16:24.55 | DoctorD90 | Kingston :P 3.0 :P 18⬠xD |
| 16:25.04 | DoctorD90 | 16gb |
| 16:25.20 | unborn | DoctorD90: what grade is that? |
| 16:25.31 | *** join/#debian XeonSquared (~ShadowKat@210.1.213.55) |
| 16:25.40 | unborn | i have kingston 16gb too but cost is £40 |
| 16:25.46 | unborn | never failed |
| 16:25.50 | *** join/#debian Gwetz (~Thunderbi@5.153.233.10) |
| 16:26.00 | DoctorD90 | the stuff that is strage, is that i do copy-hash stage 2 times, and in both, I find out the SAME file numbered corrutped |
| 16:26.09 | DoctorD90 | what do you mean with grade? |
| 16:27.44 | unborn | DoctorD90: there is difference between them.. just because you have kingstone it does not mean you have anything good. for example new standard ssd disk from kingstone are crap.. but same disk graded as A - ultra have completely different insides and also works much differently... |
| 16:27.52 | *** join/#debian tonk (~tony@2602:306:8bb9:2830:240:caff:fead:8b8a) |
| 16:28.05 | *** join/#debian Orbitrix (~Huevos@c-76-127-14-226.hsd1.nm.comcast.net) |
| 16:28.15 | *** join/#debian earthundead (~earthunde@78.25.123.149) |
| 16:28.23 | *** join/#debian MisterGadfly (~MisterGad@unaffiliated/mistergadfly) |
| 16:28.38 | MisterGadfly | How do I ignore the orphan packages? |
| 16:28.39 | unborn | DoctorD90: if you have any other usb stick try your test repeat on that |
| 16:28.55 | DoctorD90 | unborn, done :P |
| 16:29.01 | DoctorD90 | and it goes well... xD |
| 16:29.10 | DoctorD90 | due to this i thougth at bad sector |
| 16:29.40 | *** join/#debian s4ndm4n (~sandman@unaffiliated/sandman13) |
| 16:29.46 | unborn | DoctorD90: so you see? perhaps next time you purchase some usb stick, you may do research which is better (even same brand) |
| 16:29.57 | *** join/#debian spectie (~fran@177.72.2.81.in-addr.arpa) |
| 16:29.57 | *** join/#debian spectie (~fran@unaffiliated/spectie) |
| 16:30.06 | DoctorD90 | lol |
| 16:30.27 | DoctorD90 | so do you suggest that i have to trowh it in garbage? :P |
| 16:30.34 | *** join/#debian Ceber (~PHP5445-0@dslb-092-072-046-075.092.072.pools.vodafone-ip.de) |
| 16:30.39 | DoctorD90 | it is 3 years old |
| 16:30.42 | DoctorD90 | ....uff |
| 16:30.56 | unborn | DoctorD90: I didnt say that |
| 16:31.11 | unborn | perhaps you would use it normally for some crappy stuff |
| 16:31.29 | *** join/#debian lasdam (john@unaffiliated/lasdam) |
| 16:31.29 | *** join/#debian lasdam (john@gateway/vpn/mullvad/x-bgteiaqppxpxoxsm) |
| 16:32.10 | *** join/#debian dionysus70 (~Icedove@unaffiliated/dionysus69) |
| 16:32.15 | Lionyx | tks qqz |
| 16:33.10 | *** join/#debian Orbitrix (~Huevos@c-76-127-14-226.hsd1.nm.comcast.net) |
| 16:33.17 | DoctorD90 | ah, and any idea to elude that sectors? |
| 16:33.27 | DoctorD90 | ah ok |
| 16:33.30 | DoctorD90 | so no idea |
| 16:36.08 | MisterGadfly | How do I remove the "packages no longer required" message from apt-get? |
| 16:36.19 | *** join/#debian MaBunny (~Peter@117.194.207.222) |
| 16:36.36 | unborn | MisterGadfly: apt-get autoremove? |
| 16:36.45 | MisterGadfly | unborn: will that remove the packages? |
| 16:36.51 | *** join/#debian diniwed (~gavron@ool-45746e24.dyn.optonline.net) |
| 16:37.06 | MisterGadfly | unborn: I don't want them removed, I just want that message gone |
| 16:37.27 | *** join/#debian lucdalton (~lucdalton@2a02:c7d:b7d9:5c00:fcd3:12c7:3245:fb0e) |
| 16:37.29 | markybob | then manually apt-get install them |
| 16:37.31 | unborn | MisterGadfly: if you see msg that no longer required then usually on end it tells you what to do with it |
| 16:37.45 | MisterGadfly | markybob: all of them!? |
| 16:37.59 | markybob | it's copy and paste. not that difficult. it wont redownload/reinstall |
| 16:38.10 | unborn | ah message? meh did not read it properly MisterGadfly |
| 16:40.56 | *** join/#debian chachasmooth (~chachasmo@unaffiliated/chachasmooth) |
| 16:41.09 | *** join/#debian sondr3 (~sondr3@cm-84.213.195.133.getinternet.no) |
| 16:41.27 | *** join/#debian tytel (~tytel@209-6-45-101.c3-0.smr-ubr1.sbo-smr.ma.cable.rcn.com) |
| 16:42.07 | *** join/#debian crafty1 (~crafty1@c-98-237-115-56.hsd1.pa.comcast.net) |
| 16:42.45 | *** join/#debian Tundra_Mobile (~AndChat54@2600:380:4d60:38bc:1c8f:d77b:a9ea:fc26) |
| 16:43.59 | *** join/#debian aruna (~Icedove@65.95.118.151) |
| 16:44.35 | *** join/#debian Walakea_ (~marian@adsl-dyn-48.95-102-157.t-com.sk) |
| 16:44.39 | *** join/#debian doublehp (~DoubleHP@2a01:e35:8ba8:e140::52) |
| 16:47.20 | *** join/#debian I_Am_Kain (~Kain@96.84.121.61) |
| 16:47.26 | *** join/#debian sol (~sol@unaffiliated/sol) |
| 16:47.36 | sol | howdy folks |
| 16:47.43 | doublehp | teraflops: you told me a few days ago, that any phrase I adress to you make each time you a bit more confused ... I think i started using VirtualBox 2 days ago (or less, maybe 36h). I have already found a bug in it. People are often confused about my questions, and have dougts about my mental sanity; fact is, I am just asking for softwares to do what they claim they can do. And i have a special gift to find bugs. |
| 16:48.01 | *** mode/#debian [+l 1682] by debhelper |
| 16:48.05 | sol | I'm upgrading all my software from jessie to testing, and E: This installation run will require temporarily removing the essential package sysvinit-utils:amd64 due to a Conflicts/Pre-Depends loop. This is often bad, but if you really want to do it, activate the APT::Force-LoopBreak option. |
| 16:48.05 | sol | <PROTECTED> |
| 16:48.44 | sol | I'm wondering how I should proceed? I see that this bug was noted and apparently corrected by debian devs |
| 16:48.52 | sol | but I don't see any comment of how to get around it |
| 16:49.21 | sol | I'm not sure its safe to use Force-LoopBreak |
| 16:50.47 | markybob | ask #debian-next on irc.oftc.net per /topic |
| 16:51.27 | sol | thanks markybob |
| 16:55.12 | *** join/#debian soee_ (~soee@afgu58.neoplus.adsl.tpnet.pl) |
| 16:57.20 | *** join/#debian bin4ry (~bin4ry@110.159.241.219) |
| 16:57.40 | *** join/#debian phorce1_home (~gvl2@pdpc/supporter/active/phorce1) |
| 16:57.51 | *** join/#debian bin4ry (~bin4ry@110.159.241.219) |
| 16:58.01 | *** join/#debian dutchfish (~wil@unaffiliated/dutchfish) |
| 16:59.34 | *** join/#debian tytel (~tytel@209-6-45-101.c3-0.smr-ubr1.sbo-smr.ma.cable.rcn.com) |
| 17:01.41 | *** join/#debian spectie (~fran@unaffiliated/spectie) |
| 17:02.35 | *** join/#debian cdown_ (~cdown@82-132-234-75.dab.02.net) |
| 17:03.11 | *** join/#debian grubles (~grubles@unaffiliated/grubles) |
| 17:03.33 | *** join/#debian angerman (~m@bb219-75-53-219.singnet.com.sg) |
| 17:05.37 | *** join/#debian foetus (~norbi@dslb-088-072-048-118.088.072.pools.vodafone-ip.de) |
| 17:06.08 | *** part/#debian foetus (~norbi@dslb-088-072-048-118.088.072.pools.vodafone-ip.de) |
| 17:07.53 | *** join/#debian davi (~davi@gnu/davi) |
| 17:07.58 | *** join/#debian Ooze (~Ooze@unaffiliated/ooze) |
| 17:09.12 | *** join/#debian ilCyx86_64 (~ilCyx86_6@h28.163.23.98.static.ip.windstream.net) |
| 17:11.04 | *** join/#debian harobed3 (~harobed@aym57-1-78-235-112-40.fbx.proxad.net) |
| 17:11.05 | *** join/#debian harobed (~harobed@aym57-1-78-235-112-40.fbx.proxad.net) |
| 17:11.40 | *** join/#debian I_Am_Kain (~Kain@96.84.121.61) |
| 17:12.07 | *** join/#debian GeMiNniS (~geminnis@195.219.98.67) |
| 17:13.15 | *** join/#debian T0rch (~T0rch@89-79-132-230.dynamic.chello.pl) |
| 17:16.28 | *** join/#debian foetus (~norbi@dslb-088-072-048-118.088.072.pools.vodafone-ip.de) |
| 17:16.50 | *** join/#debian cdown__ (~cdown@199.201.66.0) |
| 17:17.35 | *** join/#debian jnavila (~jnavila@2a01:e35:2ef1:f910:86a6:c8ff:fe05:d3e0) |
| 17:17.52 | *** join/#debian I_Am_Kain (~Kain@96.84.121.61) |
| 17:19.27 | *** join/#debian Makaveli7 (~emir@46.197.149.93) |
| 17:19.31 | *** join/#debian sphenxes (~sphenxes@91-115-169-32.adsl.highway.telekom.at) |
| 17:20.25 | *** join/#debian Sleepy63 (~Sleepy63@71.97.91.117) |
| 17:20.26 | doublehp | teraflops: https://www.virtualbox.org/ticket/15548 . Bye ( /memo accepted ) |
| 17:20.35 | *** join/#debian derstrom (~derstrom@92.67.112.87.dyn.plus.net) |
| 17:21.43 | *** join/#debian derstrom (~derstrom@92.67.112.87.dyn.plus.net) |
| 17:22.37 | *** part/#debian foetus (~norbi@dslb-088-072-048-118.088.072.pools.vodafone-ip.de) |
| 17:23.00 | *** join/#debian foetus (~norbi@dslb-088-072-048-118.088.072.pools.vodafone-ip.de) |
| 17:23.33 | *** join/#debian Akuw (~x@201.243.60.131) |
| 17:24.24 | *** join/#debian sphenxes (~sphenxes@91-115-169-32.adsl.highway.telekom.at) |
| 17:25.51 | *** join/#debian efdetonator (~efdetonat@179.182.10.38) |
| 17:26.01 | *** join/#debian hasanatizaz2 (~hasan@39.50.250.5) |
| 17:27.13 | *** join/#debian foetus (~norbi@dslb-088-072-048-118.088.072.pools.vodafone-ip.de) |
| 17:27.24 | *** join/#debian riskc (~cell@p5B37513A.dip0.t-ipconnect.de) |
| 17:27.43 | *** join/#debian CHCl3 (~CHCl3@95.61.147.160) |
| 17:27.59 | *** join/#debian sm00th (~sm00th@unaffiliated/sm00th) |
| 17:28.33 | *** part/#debian foetus (~norbi@dslb-088-072-048-118.088.072.pools.vodafone-ip.de) |
| 17:28.57 | *** join/#debian Ceber (~PHP5445-0@dslb-092-072-046-075.092.072.pools.vodafone-ip.de) |
| 17:29.10 | *** join/#debian texla (~ray@h145.201.20.98.dynamic.ip.windstream.net) |
| 17:29.38 | *** join/#debian teclo- (42@unaffiliated/teclo) |
| 17:29.49 | riskc | on certain ACPI events, like connecting my laptop to an external power source, my usb mouse suddenly gets unrecognized. I have already had to replug it a billion times in the past for the reason. Any idea why (happens with differenz mice of diff vendors)? |
| 17:32.16 | *** join/#debian bin4ry (~bin4ry@110.159.241.219) |
| 17:33.02 | *** join/#debian cdown_ (~cdown@82-132-234-75.dab.02.net) |
| 17:33.34 | *** join/#debian bin4ry (~bin4ry@110.159.241.219) |
| 17:34.30 | *** join/#debian buglessdr (~buglessdr@ip72-208-109-38.ph.ph.cox.net) |
| 17:34.55 | *** join/#debian I_Am_Kain (~Kain@96.84.121.61) |
| 17:36.04 | *** join/#debian johefernan (~joheferna@187.153.10.208) |
| 17:36.12 | *** join/#debian de-facto (~de-facto@unaffiliated/de-facto) |
| 17:37.10 | *** join/#debian wonderworld (~ww@ip-176-198-123-154.hsi05.unitymediagroup.de) |
| 17:38.07 | *** join/#debian magyar_ (~magyar@unaffiliated/magyar) |
| 17:41.05 | *** join/#debian mazert (~mazert@ANice-653-1-467-12.w83-201.abo.wanadoo.fr) |
| 17:41.35 | *** join/#debian avis- (~identd@pdpc/supporter/student/avis) |
| 17:42.08 | *** join/#debian dionysus69 (~Icedove@unaffiliated/dionysus69) |
| 17:42.17 | *** join/#debian spectie (~fran@unaffiliated/spectie) |
| 17:44.31 | *** join/#debian efdetonator (~efdetonat@179.182.10.38) |
| 17:46.14 | *** join/#debian efdetonator (~efdetonat@179.182.10.38) |
| 17:47.20 | *** join/#debian denisk (~denisk@60.225.173.162) |
| 17:47.54 | *** join/#debian sphenxes01 (~sphenxes@178-190-239-251.adsl.highway.telekom.at) |
| 17:48.31 | *** join/#debian Ooze (~Ooze@unaffiliated/ooze) |
| 17:48.47 | *** join/#debian rudar (~rudar@94.163.57.20) |
| 17:51.26 | *** join/#debian hasanatizaz2 (~hasan@39.50.250.5) |
| 17:52.13 | *** join/#debian HasanAtizaz (~hasan@39.50.250.5) |
| 17:54.15 | MisterGadfly | It's nice that Debian's Firefox package has useless junk disabled by default |
| 17:54.44 | MisterGadfly | On Archlinux I had to google them out |
| 17:54.59 | *** join/#debian T0rch (~T0rch@89-79-132-230.dynamic.chello.pl) |
| 17:55.36 | *** join/#debian yeticry (~yeticry@60.168.45.196) |
| 17:55.37 | *** join/#debian jaggz (~jaggz@unaffiliated/jaggz) |
| 17:58.20 | *** join/#debian I_Am_Kain (~Kain@96.84.121.61) |
| 17:58.42 | *** mode/#debian [+o jelly] by ChanServ |
| 17:58.43 | *** mode/#debian [-o jelly] by ChanServ |
| 17:58.55 | *** part/#debian buglessdr (~buglessdr@ip72-208-109-38.ph.ph.cox.net) |
| 17:59.14 | *** join/#debian efdetonator (~efdetonat@179.182.10.38) |
| 18:00.10 | *** join/#debian naturaal_ (~natural@162.216.46.72) |
| 18:00.14 | rudar | MisterGadfly, what junk? |
| 18:01.27 | MisterGadfly | rudar: like some of the date reporting stuff |
| 18:01.33 | *** join/#debian shootbird (~quassel@beepbeep.serverpit.com) |
| 18:01.59 | *** join/#debian erre (~erre@unaffiliated/erre) |
| 18:02.09 | MisterGadfly | rudar: talking about this kind of stuff https://gist.github.com/haasn/69e19fc2fe0e25f3cff5 |
| 18:04.43 | *** join/#debian alexandr1 (~alexandro@unaffiliated/alexandros-c/x-1684531) |
| 18:05.01 | *** join/#debian aaro1 (~aaro@unaffiliated/xyox/x-040147) |
| 18:05.31 | *** join/#debian sphenxes (~sphenxes@178-190-239-251.adsl.highway.telekom.at) |
| 18:09.06 | *** join/#debian BlueByte (~walther@grimbart.blackx.net) |
| 18:10.26 | *** join/#debian aaro1 (~aaro@unaffiliated/xyox/x-040147) |
| 18:10.42 | *** join/#debian root-x (~root-x@unaffiliated/root-x) |
| 18:11.26 | *** join/#debian Poppa (Poppabear@cpe-71-64-205-170.cinci.res.rr.com) |
| 18:11.39 | *** join/#debian Nnavd (~Nnavd@d50-92-9-182.bchsia.telus.net) |
| 18:12.00 | *** join/#debian Devastator_ (~devas@186.214.78.253) |
| 18:12.46 | *** join/#debian fekir (~fekir@2a02:8109:8c40:3700:225:d3ff:fec3:c8dc) |
| 18:13.04 | *** join/#debian sphenxes (~sphenxes@178-190-239-251.adsl.highway.telekom.at) |
| 18:14.45 | *** join/#debian Poppabear (Poppabear@cpe-71-64-205-170.cinci.res.rr.com) |
| 18:14.46 | *** join/#debian Poppabear (Poppabear@eggheads/webdev/poppabear) |
| 18:15.57 | *** join/#debian aaro (~aaro@unaffiliated/xyox/x-040147) |
| 18:17.46 | *** join/#debian tdfischer (~tdfischer@kde/tdfischer) |
| 18:19.56 | *** join/#debian ki0 (~ki0@134.red-2-137-147.dynamicip.rima-tde.net) |
| 18:21.10 | *** mode/#debian [+o eir] by ChanServ |
| 18:21.11 | *** mode/#debian [-bo *!*@108-73-176-239.lightspeed.hstntx.sbcglobal.net eir] by eir |
| 18:24.23 | *** join/#debian iSlayWyverns (~uid18915@ppp089210158016.access.hol.gr) |
| 18:24.24 | *** join/#debian Nyctophilia (~IamHereFo@unaffiliated/nyctophilia) |
| 18:25.49 | *** join/#debian spectie (~fran@177.72.2.81.in-addr.arpa) |
| 18:25.49 | *** join/#debian spectie (~fran@unaffiliated/spectie) |
| 18:27.52 | *** join/#debian I_Am_Kain (~Kain@96.84.121.61) |
| 18:27.53 | *** join/#debian otirc (~crito@cpc2-burn7-2-0-cust351.10-1.cable.virginm.net) |
| 18:27.58 | *** join/#debian kunaaljain___ (~kunaaljai@115.99.239.26) |
| 18:29.49 | *** join/#debian sphenxes (~sphenxes@178-190-239-251.adsl.highway.telekom.at) |
| 18:30.47 | *** join/#debian lucdalton (~lucdalton@90.213.71.151) |
| 18:31.47 | *** join/#debian sauvin (~sauvin@about/linux/staff/sauvin) |
| 18:34.09 | *** join/#debian klow (~textual@c-98-247-49-57.hsd1.wa.comcast.net) |
| 18:35.47 | *** join/#debian metallic (~slowwind@96.red-83-52-127.dynamicip.rima-tde.net) |
| 18:40.24 | *** join/#debian kerimg_work (~kgueney@kyrene.trend-service.de) |
| 18:40.41 | *** join/#debian Levure (~quassel@229.222-201-80.adsl-dyn.isp.belgacom.be) |
| 18:41.14 | *** join/#debian Citizen1 (~linux@pie26-1-88-186-155-146.fbx.proxad.net) |
| 18:41.29 | *** join/#debian fennesz (~fennesz@adsl-171.37.6.247.tellas.gr) |
| 18:41.40 | *** part/#debian Citizen1 (~linux@pie26-1-88-186-155-146.fbx.proxad.net) |
| 18:41.49 | *** join/#debian denisk (~denisk@60.225.173.162) |
| 18:42.59 | *** join/#debian Citizen1 (~linux@pie26-1-88-186-155-146.fbx.proxad.net) |
| 18:43.00 | *** join/#debian Pscion (~chatzilla@ip98-167-195-74.ph.ph.cox.net) |
| 18:43.58 | *** join/#debian BasicWorker (ba415001@gateway/web/freenode/ip.186.65.80.1) |
| 18:44.04 | BasicWorker | Hello everyone |
| 18:44.10 | BasicWorker | Hello, I'm having an issue right now I'm trying to dpkg-reconfigure libnss-ldap and the output I get is "default start level arguments (2 3 4 5) do not match libnss-ldap default start value (none)" |
| 18:45.09 | *** join/#debian Cavedude (~Cavedude@unaffiliated/cavedude) |
| 18:46.00 | *** join/#debian bn` (~Patrice@ip5f593154.dynamic.kabel-deutschland.de) |
| 18:46.42 | *** join/#debian alex_732 (~smuxi@p50901072.dip0.t-ipconnect.de) |
| 18:48.09 | jelly | BasicWorker: which debian release are you using? is that the complete output? |
| 18:49.28 | BasicWorker | jelly that's pretty much the complete output the only thing missing is the "warning" at the beginning |
| 18:49.52 | BasicWorker | I'm using Linux Mint |
| 18:50.21 | BasicWorker | Linux Mint 17 |
| 18:50.50 | *** join/#debian enki (~enki@dynamic-78-30-156-27.adsl.eunet.rs) |
| 18:50.59 | *** join/#debian Ricardo__ (~rick@unaffiliated/ricardo--/x-7903455) |
| 18:51.12 | jelly | 1) a "Warning" isn't necessarily a problem 2) ask in the Mint channel, or reproduce the same issue on an actual debian installation |
| 18:51.14 | jelly | !mint |
| 18:51.15 | dpkg | Linux Mint is not Debian and is not supported in #debian. Please use their forums at http://forums.linuxmint.com/ or join #linuxmint-help on irc.spotchat.org for support. Linux Mint is variously based on <Ubuntu> with a "Linux Mint Debian Edition" (LMDE) also available. See also <based on debian>, <mintppc>. |
| 18:51.33 | jelly | BasicWorker: > #linuxmint-help on irc.spotchat.org |
| 18:51.52 | *** join/#debian CHCl3 (~CHCl3@95.61.147.160) |
| 18:52.03 | *** join/#debian netzfisch (~Thunderbi@x55b060b3.dyn.telefonica.de) |
| 18:55.17 | *** join/#debian harobed (~harobed@aym57-1-78-235-112-40.fbx.proxad.net) |
| 18:55.20 | *** join/#debian harobed3 (~harobed@aym57-1-78-235-112-40.fbx.proxad.net) |
| 18:56.06 | *** join/#debian I_Am_Kain (~Kain@96.84.121.61) |
| 18:56.43 | *** join/#debian dreaded (~dreaded@2602:306:cea4:92e0::14) |
| 18:57.34 | *** join/#debian f10_ (~flo@77.87.48.191) |
| 18:57.39 | *** join/#debian sm4sh (~smash@ip4-83-240-63-212.cust.nbox.cz) |
| 18:57.54 | *** join/#debian githogori (~githogori@c-73-70-12-67.hsd1.ca.comcast.net) |
| 18:58.00 | *** mode/#debian [+l 1688] by debhelper |
| 18:58.02 | *** join/#debian f10__ (~flo@77.87.48.191) |
| 19:00.00 | *** join/#debian iSlayWyverns (~uid18915@ppp089210158016.access.hol.gr) |
| 19:00.27 | *** join/#debian Makaveli7 (~Makaveli@46.197.149.93) |
| 19:00.33 | *** join/#debian mtn (~mtn@72.168.160.62) |
| 19:00.48 | *** join/#debian gtrotcko (~Thunderbi@bzq-82-81-213-77.cablep.bezeqint.net) |
| 19:02.12 | *** join/#debian Makaveli7 (~Makaveli@46.197.149.93) |
| 19:02.56 | *** join/#debian Orbitrix (~Huevos@c-76-127-14-226.hsd1.nm.comcast.net) |
| 19:03.15 | *** join/#debian Orbitrix (~Huevos@c-76-127-14-226.hsd1.nm.comcast.net) |
| 19:03.25 | *** join/#debian kunaaljain____ (~kunaaljai@115.99.239.26) |
| 19:03.49 | *** join/#debian Orbitrix (~Huevos@c-76-127-14-226.hsd1.nm.comcast.net) |
| 19:04.02 | *** join/#debian Makaveli7 (~Makaveli@46.197.149.93) |
| 19:04.25 | *** join/#debian bibble (~bibble@2a00:d880:5:579:a673:9349:c5e:a24b) |
| 19:05.09 | *** join/#debian kunaaljain_____ (~kunaaljai@115.99.239.26) |
| 19:05.50 | Citizen1 | mint .... |
| 19:05.54 | Citizen1 | what a noise |
| 19:08.10 | *** join/#debian cybrNaut (cybrNaut@2001:0:53aa:64c:2437:4113:bcca:66c4) |
| 19:08.40 | *** join/#debian cybrNaut (cybrNaut@2001:0:53aa:64c:2437:4113:bcca:66c4) |
| 19:10.04 | *** join/#debian dmr (~dmr@fsf/member/dmr) |
| 19:10.45 | *** join/#debian Makaveli7 (~Makaveli@46.197.149.93) |
| 19:10.47 | *** join/#debian aaro (~aaro@unaffiliated/xyox/x-040147) |
| 19:12.22 | *** join/#debian Projectns (574fb289@gateway/web/freenode/ip.87.79.178.137) |
| 19:12.34 | Projectns | Can somebody help me |
| 19:12.45 | *** join/#debian Makaveli7 (~Makaveli7@46.197.149.93) |
| 19:12.45 | Projectns | i have a vps with debian and i installed samba .. |
| 19:12.59 | Projectns | and also cifs-utils but i cant connect on the vps samba server with my mac |
| 19:13.50 | *** join/#debian hamster_sword (~hamster_s@pool-71-126-150-146.washdc.fios.verizon.net) |
| 19:14.54 | *** join/#debian sphenxes01 (~sphenxes@178-190-239-251.adsl.highway.telekom.at) |
| 19:16.17 | *** join/#debian spectie (~fran@177.72.2.81.in-addr.arpa) |
| 19:16.18 | *** join/#debian spectie (~fran@unaffiliated/spectie) |
| 19:16.27 | *** join/#debian muse (~muse@unaffiliated/grok) |
| 19:16.40 | *** join/#debian Makaveli7 (~Makaveli7@46.197.149.93) |
| 19:17.58 | *** join/#debian f10 (~flo@77.87.48.191) |
| 19:18.13 | Projectns | why cantttt i connect to smb :( |
| 19:18.16 | *** join/#debian aaro (~aaro@unaffiliated/xyox/x-040147) |
| 19:18.22 | *** join/#debian Makaveli7 (~Makaveli7@46.197.149.93) |
| 19:18.34 | abrotman | can you even connect to the ports? |
| 19:18.46 | *** join/#debian sealsniper (~user@177.35.21.117) |
| 19:19.04 | *** join/#debian Goonzu (~mojtaba@cpc1-newt35-2-0-cust3577.19-3.cable.virginm.net) |
| 19:19.19 | *** join/#debian iiaann (~ian@cpc76508-clyd5-2-0-cust137.14-1.cable.virginm.net) |
| 19:19.35 | *** join/#debian I_Am_Kain (~Kain@96.84.121.61) |
| 19:20.17 | *** join/#debian relox (~weechat@aftr-185-17-205-109.dynamic.mnet-online.de) |
| 19:20.25 | *** join/#debian pencilandpaper (~penciland@unaffiliated/pencilandpaper) |
| 19:20.34 | unborn | Projectns: ^^^ |
| 19:20.35 | Projectns | nope |
| 19:20.36 | Projectns | :( |
| 19:20.39 | unborn | 3020TCPUDPCIFS / SMB |
| 19:20.47 | Projectns | i see that the port 445 and 139 is open |
| 19:20.50 | *** join/#debian breakfast (490f4a57@gateway/web/freenode/ip.73.15.74.87) |
| 19:20.54 | Projectns | i checked it with telnet |
| 19:21.10 | unborn | 3020TCPUDPCIFS / SMB is port you need Projectns |
| 19:21.10 | Projectns | 3020 is closed |
| 19:21.18 | *** join/#debian kunaaljain____ (~kunaaljai@115.99.239.26) |
| 19:21.20 | Projectns | okay than its not online :/ |
| 19:21.21 | unborn | well why not ssh? |
| 19:21.34 | Projectns | i wanna mount my drive as a normal drive |
| 19:21.40 | unborn | yeah |
| 19:21.53 | unborn | you can use it as folder via ssh no? |
| 19:22.03 | Projectns | and how? ^^ |
| 19:22.04 | abrotman | Projectns: sshfs is a thing youcan use, and should |
| 19:22.07 | abrotman | !sshfs |
| 19:22.08 | dpkg | sshfs is a <FUSE>-based filesystem using <SSH> for securely mounting remote resources. See http://fuse.sf.net/sshfs.html and http://sf.net/apps/mediawiki/fuse?title=SshfsFaq for more information. Remember to add yourself to the 'fuse' group. If you have problems with stale sshfs mounts, set ServerAliveInterval 30 (for 30 seconds) in /etc/ssh/ssh_config or ~/.ssh/config. |
| 19:22.10 | *** join/#debian Yukiteru (~Yukiteru@unaffiliated/yukiteru) |
| 19:22.16 | Projectns | okay |
| 19:22.19 | unborn | Projectns: its quiet simple |
| 19:22.28 | Projectns | so its better to use sshfs as smb/cifs? |
| 19:22.32 | unborn | Projectns: you did setup ssh keys yeah? |
| 19:22.36 | Projectns | yes |
| 19:22.58 | unborn | sure.. you know how to 'connect to server' in your finder? |
| 19:23.04 | Projectns | yes :D |
| 19:23.09 | unborn | use that :) |
| 19:23.15 | unborn | one moment |
| 19:23.22 | Projectns | for sshfs ? |
| 19:23.28 | Projectns | or smb? |
| 19:24.38 | unborn | Projectns: sftp://your-username@your-vps.com/home/folder-with-files |
| 19:24.52 | Projectns | :D over ftp? |
| 19:25.04 | unborn | connect to it and make shortcut on desktop or save it to your favourites |
| 19:25.22 | Projectns | what can you recomend ? sshfs or sftp? |
| 19:25.30 | unborn | Projectns: sftp://debian@debian.dev/home/debian/public_html |
| 19:25.31 | Projectns | *recommend |
| 19:25.38 | unborn | just said it sftp |
| 19:25.46 | unborn | dont you read or something? |
| 19:26.12 | *** join/#debian cyan__ (~cyan@d159-225.icpnet.pl) |
| 19:26.40 | *** join/#debian edgrey (~edgrey@178.205.209.11) |
| 19:27.14 | jelly | Projectns: sshfs is just another sftp client. |
| 19:27.24 | jelly | so you're using sftp in both cases |
| 19:27.32 | *** join/#debian ragedragon (~ragedrago@hus54-1-78-214-148-27.fbx.proxad.net) |
| 19:27.38 | Projectns | ok |
| 19:28.00 | *** mode/#debian [+l 1695] by debhelper |
| 19:28.55 | *** join/#debian zorg24 (~zorg24@162.242.94.137) |
| 19:28.59 | *** join/#debian breakfast (490f4a57@gateway/web/freenode/ip.73.15.74.87) |
| 19:29.13 | *** join/#debian we6jbo2 (~we6jbo2@cpe-75-80-39-152.san.res.rr.com) |
| 19:29.21 | breakfast | so here is an ssh command to get around imgur being blocked ssh -L 9000:imgur.com:80 user@example.com |
| 19:30.01 | *** join/#debian Colti (Miramar-FL@unaffiliated/miramar-fl) |
| 19:30.02 | breakfast | is this telling your intermediate server at example.com to look at port 80 at imgur.com? |
| 19:30.43 | breakfast | and assigning port 9000 on the subnet thats blocking imgur to look at that server |
| 19:30.49 | breakfast | ? |
| 19:31.31 | hicksd | it's saying forward port 9000 locally to imgur.com port 80 via the example.com system |
| 19:31.51 | hicksd | see man ssh specifically the -L section for a bit more info. |
| 19:32.07 | breakfast | right so thats what i said right? im new to both networking and ssh |
| 19:32.13 | hicksd | yes |
| 19:32.16 | *** join/#debian papey (~papey@andarta.libricks.net) |
| 19:32.31 | *** join/#debian Bridouz (~justin@57.103.100.84.rev.sfr.net) |
| 19:32.36 | breakfast | the question i have is why this tyranical subnet would allow you to forward ports |
| 19:32.47 | breakfast | why would they allow that if they are blocking websites |
| 19:33.06 | hicksd | they're not allowing it, they don't know you're port forwarding |
| 19:33.09 | *** part/#debian Bridouz (~justin@57.103.100.84.rev.sfr.net) |
| 19:33.16 | hicksd | the only thingthey're allowing is you to run ssh connections to other hosts |
| 19:33.22 | hicksd | and you can tunnel over ssh. |
| 19:33.47 | hicksd | but "they" won't know that since ssh is encrypted. Only your machine and the example.com machine will know that |
| 19:34.59 | breakfast | hicksd: oh what i meant was that you are opening a port and why would they let you do that. but they have to let you do it because all normal applications are going to open random ports if they interact with the internet. |
| 19:35.00 | *** join/#debian Colti (Miramar-FL@unaffiliated/miramar-fl) |
| 19:35.54 | *** part/#debian Citizen1 (~linux@pie26-1-88-186-155-146.fbx.proxad.net) |
| 19:35.59 | *** join/#debian Citizen1 (~linux@pie26-1-88-186-155-146.fbx.proxad.net) |
| 19:36.08 | *** join/#debian RebelCoder (~jurisl85@cpc74579-lewi13-2-0-cust201.2-4.cable.virginm.net) |
| 19:36.14 | breakfast | i get it |
| 19:36.37 | breakfast | whats the best irc for learning more about networking stuff? |
| 19:38.23 | *** join/#debian neffs (~neffs@2a01:4f8:162:4c4::87) |
| 19:39.16 | up2late | i just installed debian, how do i set it to where i can ssh into it from anpother computer |
| 19:39.21 | *** join/#debian avis- (~identd@pdpc/supporter/student/avis) |
| 19:39.24 | up2late | do i have to open a port 22 or whatever |
| 19:39.55 | *** join/#debian PseudoNoob (~PseudoNoo@unaffiliated/pseudonoob) |
| 19:40.17 | TomTomTosch | up2late: all you need to do is install the ssh server. it's an option during the install too btw. |
| 19:40.39 | up2late | i beleive i did that |
| 19:40.55 | breakfast | what about forwarding port 22? |
| 19:40.57 | *** join/#debian GunshipPenguin (~GunshipPe@d75-155-205-164.bchsia.telus.net) |
| 19:41.15 | *** join/#debian theviajerock (~victor@cable201-232-160-169.epm.net.co) |
| 19:41.22 | TomTomTosch | why forwarding if you want to access it from the local network? |
| 19:41.37 | up2late | how can i see if i installed ssh server |
| 19:41.43 | up2late | im a debian noob |
| 19:41.48 | up2late | just trying it out |
| 19:41.53 | TomTomTosch | up2late: dpkg -l openssh-server |
| 19:42.35 | TomTomTosch | up2late: or systemctl status ssh.service to see if the server is up. |
| 19:42.54 | *** join/#debian efdetonator (~efdetonat@179.182.10.38) |
| 19:43.18 | Citizen1 | or apt install ssh |
| 19:43.38 | breakfast | is the ssh server always running by default? |
| 19:43.43 | breakfast | how to stop and start it? |
| 19:44.12 | *** join/#debian Anonymes (uid168604@gateway/web/irccloud.com/x-skffbqtwdhgsyura) |
| 19:44.21 | up2late | tomocha_____: says its activly running |
| 19:44.23 | up2late | err |
| 19:44.23 | TomTomTosch | systemctl stop ssh.service start/stop/disable/status |
| 19:44.24 | up2late | tomtom |
| 19:44.37 | up2late | says listnening on 0.0.0.0.0 tho |
| 19:44.38 | TomTomTosch | up2late: then you can connect from your local network. |
| 19:45.01 | Citizen1 | if he is modify the /etc/init.d/ssh its ok ? |
| 19:45.13 | Citizen1 | or systemctl is necessary ? |
| 19:45.16 | TomasCZ | don't modify that |
| 19:45.26 | up2late | TomTomTosch: how do i verify the ip im using is correct |
| 19:45.26 | *** join/#debian CrazyTux[m] (~CrazyTuxm@ip72-194-86-57.oc.oc.cox.net) |
| 19:45.44 | TomasCZ | ifconfig ? |
| 19:45.54 | *** join/#debian awal1 (~awal1@199.241.132.84) |
| 19:45.55 | TomTomTosch | up2late: 'ip addr' to see the ips your computer has. |
| 19:46.30 | Citizen1 | and modify /etc/default/ssh and put the option in its ok ? |
| 19:46.32 | TomasCZ | or that. |
| 19:46.54 | up2late | ahh, i used the wrong ip |
| 19:46.56 | bezaban | Citizen1: that works, but might as well just change it in the config file, but that is not needed for it to work (0.0.0.0) is all interfaces |
| 19:46.56 | up2late | thanks guys |
| 19:47.04 | bezaban | well all ipv4 interfaces anyway |
| 19:47.15 | *** join/#debian woshty (~irc@HSI-KBW-5-56-232-4.hsi17.kabel-badenwuerttemberg.de) |
| 19:47.36 | TomTomTosch | no problemo |
| 19:47.38 | *** part/#debian Citizen1 (~linux@pie26-1-88-186-155-146.fbx.proxad.net) |
| 19:47.48 | *** join/#debian wobelingers (~wobelinge@p54B1B19C.dip0.t-ipconnect.de) |
| 19:47.51 | *** join/#debian Citizen1 (~linux@pie26-1-88-186-155-146.fbx.proxad.net) |
| 19:48.02 | *** join/#debian kunaaljain____ (~kunaaljai@106.51.31.23) |
| 19:48.35 | *** join/#debian bazhang (~bazhang@unaffiliated/bazhang) |
| 19:48.38 | bezaban | Citizen1: also not really recommended if you are on a network with dynamic ip allocation or if you want to connect to another network |
| 19:48.49 | TomTomTosch | TomasCZ: those new tools are a change for me too, i try to condition myself to use them now, though ;D |
| 19:49.29 | *** join/#debian neffs (~neffs@2a01:4f8:162:4c4::87) |
| 19:49.43 | TomasCZ | I use them for advanced things. other than that it's just habit |
| 19:50.07 | TomasCZ | can't say but the formatting of ifconfig changed not so long ago. |
| 19:50.19 | *** join/#debian klow (~textual@c-98-247-49-57.hsd1.wa.comcast.net) |
| 19:51.12 | *** join/#debian wobeling1rs (~wobelinge@p54B1B19C.dip0.t-ipconnect.de) |
| 19:51.19 | bezaban | I find 'ip a' so much more comfortable than 'sudo ifconfig'. (or sudo /sbin/ifconfig on other distros) |
| 19:53.38 | *** join/#debian teclo- (42@unaffiliated/teclo) |
| 19:56.28 | *** join/#debian Devastator_ (~devas@unaffiliated/devastator) |
| 19:58.30 | *** join/#debian endgo (endgo@gateway/vpn/mullvad/x-pyecusagbploaajs) |
| 19:58.52 | *** join/#debian Vante (~Vante@92.241.252.136) |
| 19:59.34 | *** join/#debian cyborg-one (~cyborg-on@188-115-136-64.broadband.tenet.odessa.ua) |
| 20:00.25 | *** join/#debian amcorreia (~amcorreia@2804:7f5:280:9a2a::2) |
| 20:00.30 | *** join/#debian Sir_Designer (~Sir_Desig@wikipedia/mareklug) |
| 20:01.31 | *** join/#debian well_laid_lawn (~Jean-luc@c122-104-151-194.rochd6.qld.optusnet.com.au) |
| 20:01.36 | *** join/#debian jubo2 (~juboxi@wikipedia/jukeboksi) |
| 20:03.08 | *** join/#debian finnpixel (~finnpixel@av-217-129-135-231.netvisao.pt) |
| 20:04.25 | *** join/#debian jbitdrop (~jbitdrop@x4db40539.dyn.telefonica.de) |
| 20:04.26 | *** join/#debian digidog (~digidog@x4db40539.dyn.telefonica.de) |
| 20:05.14 | *** join/#debian trobotham (nitemare@bnc.ku.cx) |
| 20:06.03 | *** join/#debian alske (c869ba0b@gateway/web/freenode/ip.200.105.186.11) |
| 20:06.09 | alske | Hello. |
| 20:06.42 | alske | I am running mint right now. Is there a way to install debian without a usb or cd? Maybe just with mint? |
| 20:07.47 | sypher | alske: I THINK there are ways to boot into an installer from within the current OS, but I can't vouch for any personally. |
| 20:08.10 | abrotman | !debootstrap |
| 20:08.11 | dpkg | debootstrap can create a basic Debian system from scratch, without apt/dpkg. Useful for installing in a <chroot>. It is key to installing Debian GNU/Linux from a Unix/Linux system, ask me about <install guide>. http://wiki.debian.org/Debootstrap http://www.debian-administration.org/article/Installing_new_Debian_systems_with_debootstrap |
| 20:08.17 | alske | sypher: Thanks for answering. I would love to do it that way. |
| 20:08.53 | alske | abrotman: Have you tried to do this? Is it easy? |
| 20:10.10 | *** join/#debian neffs (~neffs@2a01:4f8:162:4c4::87) |
| 20:10.40 | *** join/#debian neffs (~neffs@2a01:4f8:162:4c4::87) |
| 20:10.46 | *** join/#debian d4rklit3 (~textual@cpe-76-90-191-36.socal.res.rr.com) |
| 20:11.31 | TomTomTosch | alske: there is a little bit more to it. here is a more in-depth explenation https://www.debian.org/releases/stable/amd64/apds03.html.en |
| 20:12.11 | alske | TomTomTosch: Thank you! It seems that i will download all the packages from the repos. Can I just get the packages from the iso I already have? |
| 20:13.13 | *** join/#debian metallic (~slowwind@96.red-83-52-127.dynamicip.rima-tde.net) |
| 20:14.55 | *** join/#debian N3X15 (~Rob@2602:ae:18f0:5400:fd56:34bf:cfcc:8fb7) |
| 20:15.42 | *** join/#debian hR13_ (~hR13@h-217-22.a357.priv.bahnhof.se) |
| 20:16.16 | *** join/#debian x032cx (~lxuser@unaffiliated/tdis) |
| 20:16.23 | TomTomTosch | debootstrap just pulls the base system. that's not that large. afterwards you can apt-cdrom to add a cd to your sources. i wouldn't bother, though. |
| 20:16.41 | TomTomTosch | * you can use |
| 20:16.44 | *** join/#debian awal1 (~awal1@199.241.132.84) |
| 20:17.52 | *** join/#debian Darcidride (~Darcidrid@158.69.114.146) |
| 20:18.00 | *** join/#debian dionysus69 (~Icedove@unaffiliated/dionysus69) |
| 20:19.20 | *** join/#debian woshty (~irc@HSI-KBW-5-56-232-4.hsi17.kabel-badenwuerttemberg.de) |
| 20:21.54 | *** join/#debian infra-red (~infra-red@216.241.178.19) |
| 20:22.27 | *** join/#debian byzant1ne (~byzant1ne@208.167.254.75) |
| 20:24.21 | *** join/#debian d4rklit3 (~textual@cpe-76-90-191-36.socal.res.rr.com) |
| 20:27.31 | *** join/#debian Tachyon` (tachyon@yuna.autie.net) |
| 20:28.18 | Tachyon` | hi, anyone know why oidentd is going rogue occasionally and maxing out the cpu / spawning lots of copies of itself? is there a simple identd I can use instead? |
| 20:28.47 | *** part/#debian AngeFede (~f3d3@vai87-2-78-232-53-248.fbx.proxad.net) |
| 20:30.02 | *** join/#debian denisk (~denisk@60.225.173.162) |
| 20:31.04 | *** join/#debian dvs (~hibbard@cwv.teksavvy.com) |
| 20:31.11 | *** join/#debian awal1 (~awal1@199.241.132.84) |
| 20:32.18 | *** join/#debian DebianNewbie (ba415001@gateway/web/freenode/ip.186.65.80.1) |
| 20:32.19 | *** join/#debian CutMeOwnThroat (~k@unaffiliated/iridos) |
| 20:33.14 | DebianNewbie | Hello everyone |
| 20:33.35 | *** join/#debian GunshipPenguin (~GunshipPe@d75-155-205-164.bchsia.telus.net) |
| 20:33.44 | *** part/#debian endgo (endgo@gateway/vpn/mullvad/x-pyecusagbploaajs) |
| 20:33.47 | *** join/#debian spectie (~fran@unaffiliated/spectie) |
| 20:33.47 | DebianNewbie | I try to do a apt-get install libnss-ldap on my debian 8 and it can't locate the package |
| 20:34.00 | *** join/#debian GunshipPenguin (~GunshipPe@d75-155-205-164.bchsia.telus.net) |
| 20:34.30 | *** part/#debian gchristensen (~gchristen@unaffiliated/grahamc) |
| 20:35.43 | *** join/#debian foetus (~norbi@dslb-088-072-048-118.088.072.pools.vodafone-ip.de) |
| 20:36.10 | *** join/#debian mtn (~mtn@72.168.160.62) |
| 20:36.35 | *** join/#debian Makaveli7 (~Makaveli7@46.197.149.93) |
| 20:36.40 | *** join/#debian foetus (~norbi@dslb-088-072-048-118.088.072.pools.vodafone-ip.de) |
| 20:36.48 | jelly | DebianNewbie: yay debian! verify the contents of your /etc/apt/sources.list are sane... pastebin the file |
| 20:36.53 | jelly | !jessie sources.list |
| 20:36.54 | dpkg | A suitable /etc/apt/sources.list for Debian 8 "Jessie" has three lines: "deb http://httpredir.debian.org/debian/ jessie main" "deb http://security.debian.org/ jessie/updates main" "deb http://httpredir.debian.org/debian/ jessie-updates main". Be sure to run «aptitude update» after editing sources.list. Also see <deb-src> <contrib> <non-free> <jessie/updates> <jessie-updates> <mirrors> and "man sources.list". |
| 20:39.06 | *** join/#debian d4rklit3 (~textual@cpe-76-90-191-36.socal.res.rr.com) |
| 20:39.08 | *** join/#debian Lokke (~Thunderbi@ip5f5ad252.dynamic.kabel-deutschland.de) |
| 20:41.10 | *** join/#debian mtn (~mtn@72.168.160.62) |
| 20:41.36 | *** join/#debian ynanm (~quassel@bl14-17-227.dsl.telepac.pt) |
| 20:41.38 | *** join/#debian Lokke (~Thunderbi@ip5f5ad252.dynamic.kabel-deutschland.de) |
| 20:42.10 | *** join/#debian danxor (~none@145.133.255.103) |
| 20:42.40 | *** join/#debian danxor (~none@145.133.255.103) |
| 20:45.29 | *** join/#debian pencilandpaper (~penciland@unaffiliated/pencilandpaper) |
| 20:45.37 | *** join/#debian mtn (~mtn@72.168.160.62) |
| 20:45.59 | *** join/#debian Darcidride (~Darcidrid@158.69.114.146) |
| 20:46.33 | *** join/#debian harro (~chinanum1@b.06.01a8.ip4.static.sl-reverse.com) |
| 20:48.01 | *** mode/#debian [+l 1688] by debhelper |
| 20:48.01 | *** join/#debian SpeccyMan (~nick@94.197.120.152.threembb.co.uk) |
| 20:48.16 | *** join/#debian naturaal (~natural@c-73-14-116-65.hsd1.co.comcast.net) |
| 20:51.26 | tonk | I finally had to add the "non-free" repository and get adobe flash. Couldn't watch porhub without it. |
| 20:52.42 | *** join/#debian mtn (~mtn@72.168.160.62) |
| 20:52.46 | *** join/#debian patterson (~patterson@73.93.143.97) |
| 20:53.27 | *** join/#debian zeemz (~zeemz@189.140.217.150) |
| 20:53.28 | *** join/#debian amcorreia (~amcorreia@2804:7f5:280:9a2a::2) |
| 20:53.31 | *** join/#debian aaro (~aaro@unaffiliated/xyox/x-040147) |
| 20:54.15 | H4ndy | I am pretty sure most of those sites work just fine without flash |
| 20:54.20 | H4ndy | :^) |
| 20:55.37 | *** join/#debian catsup (d@ps38852.dreamhost.com) |
| 20:56.24 | jelly | H4ndy: many do html5 only if your browser can pretend it's a mobile device well enough, else they still push flash |
| 20:56.30 | jelly | OR SO I HEAR |
| 20:56.30 | *** join/#debian Yukiteru (~Yukiteru@unaffiliated/yukiteru) |
| 20:56.56 | H4ndy | I heard of a friend who's using Firefox without plugins just fine |
| 20:57.15 | jelly | I have no plugins in firefox, sure. |
| 20:57.24 | jelly | use Chrome for all that crap ;-) |
| 20:58.01 | *** join/#debian jmyrv (~jmyrv@185.14.187.102) |
| 20:58.23 | jelly | it seems to have betterer hw acceleration features for video |
| 20:58.43 | H4ndy | well I am on windows with that, so I have no direct experience of that on deb |
| 20:59.25 | *** join/#debian tty0_ (~NA@unaffiliated/tty0/x-3092968) |
| 21:00.20 | *** join/#debian root-x (~root-x@unaffiliated/root-x) |
| 21:00.31 | jelly | you mean your friend is on windows. |
| 21:03.03 | *** join/#debian PP5MGT (~pi@186.216.145.35) |
| 21:05.10 | *** join/#debian spectie (~fran@unaffiliated/spectie) |
| 21:05.43 | *** join/#debian GunshipPenguin (~GunshipPe@d75-155-205-164.bchsia.telus.net) |
| 21:06.20 | *** join/#debian GunshipPenguin (~GunshipPe@d75-155-205-164.bchsia.telus.net) |
| 21:06.49 | *** join/#debian GunshipPenguin (~GunshipPe@d75-155-205-164.bchsia.telus.net) |
| 21:08.00 | *** mode/#debian [+l 1680] by debhelper |
| 21:09.12 | *** join/#debian Darcidride (~Darcidrid@158.69.114.146) |
| 21:09.13 | *** join/#debian zeemz (~zeemz@189.140.217.150) |
| 21:10.14 | *** join/#debian Paianni (~sailfish@cpc16-heme9-2-0-cust232.9-1.cable.virginm.net) |
| 21:10.51 | *** join/#debian f10_ (~flo@77.87.48.191) |
| 21:10.59 | *** join/#debian f10__ (~flo@2001:470:52af:1:3486:2bfb:3ad8:aef1) |
| 21:13.33 | H4ndy | jelly: erm.. yes, of course |
| 21:13.50 | H4ndy | I am on a terminal-linux only with lynx as my browser |
| 21:15.39 | *** join/#debian denisk (~denisk@60.225.173.162) |
| 21:15.48 | *** join/#debian d0nn1e (~d0nn1e@cpe-75-183-8-113.triad.res.rr.com) |
| 21:16.17 | *** join/#debian HasanAtizaz (~hasan@39.50.163.182) |
| 21:16.37 | *** join/#debian GunshipPenguin (~GunshipPe@d75-155-205-164.bchsia.telus.net) |
| 21:17.02 | *** join/#debian GunshipPenguin (~GunshipPe@d75-155-205-164.bchsia.telus.net) |
| 21:17.15 | *** join/#debian lasdam (john@gateway/vpn/mullvad/x-mezkqrrtguxuowsa) |
| 21:17.27 | *** join/#debian GunshipPenguin (~GunshipPe@d75-155-205-164.bchsia.telus.net) |
| 21:17.39 | *** join/#debian thunderrd_ (~thunderrd@110.77.212.65) |
| 21:17.54 | *** join/#debian GunshipPenguin (~GunshipPe@d75-155-205-164.bchsia.telus.net) |
| 21:19.18 | *** join/#debian f10_ (~flo@77.87.48.191) |
| 21:19.22 | *** join/#debian neffs (~neffs@cloud.o7o.de) |
| 21:19.55 | *** join/#debian f10__ (~flo@2001:470:52af:1:3486:2bfb:3ad8:aef1) |
| 21:20.08 | *** join/#debian spectie (~fran@177.72.2.81.in-addr.arpa) |
| 21:20.08 | *** join/#debian spectie (~fran@unaffiliated/spectie) |
| 21:22.27 | *** join/#debian cdown_ (~cdown@82-132-216-172.dab.02.net) |
| 21:25.42 | *** join/#debian slowmatt (~matt@108.61.228.12) |
| 21:27.38 | *** join/#debian f10_ (~flo@2001:470:52af:1:1015:ab7e:f808:4213) |
| 21:28.09 | *** join/#debian Pscion_ (~chatzilla@ip98-167-195-74.ph.ph.cox.net) |
| 21:28.14 | *** join/#debian iio7 (~iio7@104.238.169.152) |
| 21:28.18 | *** join/#debian pavlushka (~Pavel@unaffiliated/pavlushka) |
| 21:29.08 | iio7 | I am running Jessie on a box which has an 3.x kernel and a 4.6 from backports. Grub doesn't any longer provide both options, it just boots from 4.6, how do I make it so I can choose between the two? |
| 21:29.49 | *** join/#debian Queenslayer (~Queenslay@78.157.207.144) |
| 21:31.26 | *** join/#debian foetus (~foetus@dslb-088-072-048-118.088.072.pools.vodafone-ip.de) |
| 21:31.36 | iio7 | "Generating grub configuration file", it finds both, but during boot only the 4.6 is available. |
| 21:32.18 | *** join/#debian RichiH (~richih@freenode/senior-staff-emeritus/richih) |
| 21:34.53 | mtn | iio7: do you see Advanced Options in the grub menu? |
| 21:35.51 | iio7 | mtn, just found it in there. Thanks. |
| 21:36.27 | *** join/#debian ^v (~v^@2602:ffc5::d0d9:3ea) |
| 21:40.10 | *** join/#debian foetus (~foetus@dslb-088-072-048-118.088.072.pools.vodafone-ip.de) |
| 21:40.57 | *** join/#debian chx (~chx@unaffiliated/chx) |
| 21:41.10 | *** join/#debian Tetrazene (~Carp@2601:49:c302:560:9105:2e75:802f:c9b5) |
| 21:41.58 | *** part/#debian Citizen1 (~linux@pie26-1-88-186-155-146.fbx.proxad.net) |
| 21:42.36 | chx | hi. i am on oldstable. uname -a says 3.16.0-0.bpo.4-amd64 . modinfo fuse reports /lib/modules/3.16.0-0.bpo.4-amd64/kernel/fs/fuse/fuse.ko and vermagic 3.16.0-0.bpo.4-amd64 however when i try modprobe fuse it dies with https://paste.kde.org/pkymxomep |
| 21:43.17 | chx | sysfs_create_mount_point is a 4.2 thing. I have no idea where that comes from. |
| 21:43.48 | chx | running strings /lib/modules/3.16.0-0.bpo.4-amd64/kernel/fs/fuse/fuse.ko|grep sysfs does find that string, however. |
| 21:44.53 | *** join/#debian bollocks_k (~bollocks@ip98-181-22-69.br.br.cox.net) |
| 21:54.34 | *** join/#debian mrrhq (~mrrhq@2602:b8:64c7:2200:227:10ff:fe25:d07c) |
| 21:54.42 | *** join/#debian jfdh (~jfdh@unaffiliated/jfdh) |
| 21:55.31 | *** join/#debian linuxfool (~james@71-45-66-171.res.bhn.net) |
| 21:57.03 | *** join/#debian foetus (~foetus@dslb-088-072-048-118.088.072.pools.vodafone-ip.de) |
| 21:57.14 | *** join/#debian GG (~GitGud@unaffiliated/gitgud) |
| 21:58.36 | *** join/#debian nanoha-sama (~nanoha-sa@van-app-svr.ad.v10networks.ca) |
| 22:00.22 | *** join/#debian CrazyTux[m] (~CrazyTuxm@2600:1012:b155:5010:e14d:5070:f7aa:5213) |
| 22:00.28 | *** join/#debian benkard (~benkard@p200300864C02140130421B5420F35741.dip0.t-ipconnect.de) |
| 22:08.00 | *** mode/#debian [+l 1673] by debhelper |
| 22:09.37 | *** join/#debian bollocks_k (~bollocks@ip98-181-31-179.br.br.cox.net) |
| 22:10.46 | *** part/#debian linuxfool (~james@71-45-66-171.res.bhn.net) |
| 22:11.39 | *** join/#debian spectie (~fran@177.72.2.81.in-addr.arpa) |
| 22:11.39 | *** join/#debian spectie (~fran@unaffiliated/spectie) |
| 22:13.36 | *** join/#debian JPT (~jpt@classified.name) |
| 22:13.43 | *** join/#debian booboy (~booboy@c-50-129-174-141.hsd1.il.comcast.net) |
| 22:14.03 | *** join/#debian npo (~np@c-98-216-67-78.hsd1.ma.comcast.net) |
| 22:14.33 | *** join/#debian SteveRobbins (~steve@S010604a151e30003.wp.shawcable.net) |
| 22:14.49 | *** join/#debian danxor (~none@145.133.255.103) |
| 22:15.54 | *** join/#debian ragedragon (~ragedrago@hus54-1-78-214-148-27.fbx.proxad.net) |
| 22:16.16 | *** join/#debian HerculeP (~herc@ip-109-43-2-156.web.vodafone.de) |
| 22:16.25 | DebianNewbie | ahhh thank god I installed debian |
| 22:16.29 | DebianNewbie | It's working so well :_) |
| 22:16.35 | dvs | ??? |
| 22:17.15 | *** join/#debian paperd (~micas@96.229.216.153) |
| 22:18.42 | *** join/#debian bin4ry (~bin4ry@110.159.241.219) |
| 22:20.49 | *** join/#debian n_blownapart (~john@2601:644:502:d470:9eef:d5ff:feff:34fe) |
| 22:20.51 | *** join/#debian r4fkdebian (~r4fkdebia@179.110.150.64) |
| 22:21.02 | r4fkdebian | Hi all |
| 22:21.06 | *** join/#debian GunshipPenguin (~GunshipPe@d75-155-205-164.bchsia.telus.net) |
| 22:21.32 | *** join/#debian GunshipPenguin (~GunshipPe@d75-155-205-164.bchsia.telus.net) |
| 22:21.56 | *** join/#debian GunshipPenguin (~GunshipPe@d75-155-205-164.bchsia.telus.net) |
| 22:22.05 | r4fkdebian | I would like to know if there is any application in Debian Jessie through command line to convert video formats and record to media after conversion |
| 22:22.17 | r4fkdebian | everything through command line, without graphical interface resource |
| 22:22.21 | *** join/#debian GunshipPenguin (~GunshipPe@d75-155-205-164.bchsia.telus.net) |
| 22:23.59 | jercos | r4fkdebian: sounds like you're looking for avconv. libav-tools would be the package to install. |
| 22:24.28 | jercos | not sure what you mean by "media", if you're talking about DVD or blu-ray authoring I'm not familiar with the software used for that myself. |
| 22:25.00 | dvs | like wodem? |
| 22:25.35 | awal1 | Apart kdenlive, shotwell, kino and openshot, any audio/video/potho editor with gui you recommend ? |
| 22:25.37 | jercos | wodim will burn disc media from an image, I don't believe it will author a video disc. |
| 22:26.04 | awal1 | I have tried flowblade but why xfce hangs when I run it |
| 22:30.00 | *** join/#debian jak2000 (~jak2000@187.192.81.195) |
| 22:30.20 | jak2000 | hi all i changed this line in sudoers: Defaults:jsmith timestamp_timeout=30 for 30 minutes, but not work, any advice? |
| 22:33.32 | *** join/#debian GunshipPenguin (~GunshipPe@d75-155-205-164.bchsia.telus.net) |
| 22:33.40 | *** join/#debian VeggieMeat (~veggiemea@wsip-70-182-94-19.ok.ok.cox.net) |
| 22:33.58 | *** join/#debian GunshipPenguin (~GunshipPe@d75-155-205-164.bchsia.telus.net) |
| 22:34.14 | *** join/#debian harobed (~harobed@aym57-1-78-235-112-40.fbx.proxad.net) |
| 22:34.17 | *** join/#debian harobed3 (~harobed@aym57-1-78-235-112-40.fbx.proxad.net) |
| 22:34.23 | *** join/#debian GunshipPenguin (~GunshipPe@d75-155-205-164.bchsia.telus.net) |
| 22:38.00 | *** mode/#debian [+l 1666] by debhelper |
| 22:39.51 | *** join/#debian aaro (~aaro@unaffiliated/xyox/x-040147) |
| 22:41.31 | *** join/#debian bin4ry_ (~bin4ry@110.159.244.227) |
| 22:45.45 | *** join/#debian altin_ (~altin@flossk/altin) |
| 22:46.11 | *** join/#debian w00die (~pi@95.72.230.117) |
| 22:46.20 | *** join/#debian BenNZ (~Ben__@118-93-25-22.dsl.dyn.ihug.co.nz) |
| 22:47.07 | r4fkdebian | back again, sorry. Does it convert and record after, jercos (libav-tools) ? I have it installed already, just used it to download and convert videos |
| 22:47.12 | *** join/#debian GunshipPenguin (~GunshipPe@d75-155-205-164.bchsia.telus.net) |
| 22:47.31 | r4fkdebian | but is it possible to burn to dvd the conversion too ? |
| 22:47.39 | *** join/#debian GunshipPenguin (~GunshipPe@d75-155-205-164.bchsia.telus.net) |
| 22:48.00 | *** mode/#debian [+l 1658] by debhelper |
| 22:48.02 | r4fkdebian | Hi dvs, Please, what is wodem ? |
| 22:49.20 | dvs | !wodim |
| 22:49.20 | dpkg | wodim ("write optical disk media") is a <DFSG> compliant fork of <cdrecord>, part of <cdrkit> and available in the wodim package. See http://lwn.net/Articles/198171/ for the release notice. Use -pad for .wav files when burning audio. Use -swab if your CDR uses little endian or .cdr is in big endian -- basically if the audio on CD is static, use -swab. |
| 22:49.24 | *** join/#debian aaro1 (~aaro@unaffiliated/xyox/x-040147) |
| 22:49.45 | *** join/#debian spronk (~spronkey@247.177.69.111.dynamic.snap.net.nz) |
| 22:50.13 | *** join/#debian cesurasean (uid158645@gateway/web/irccloud.com/x-slknqurthropeyjc) |
| 22:52.14 | DebianNewbie | Hey, I'm configuring libpam-ldap on my debian and now I have to decide which PAM profile I want to enable, I have 4 options and I know I just need two but would it hurt to enable all 4? |
| 22:52.40 | *** join/#debian skiz (~skiz@96.238.223.6) |
| 22:53.41 | *** join/#debian banjo_ (~banjo@aftr-109-91-35-133.unity-media.net) |
| 22:54.07 | *** join/#debian spectie (~fran@177.72.2.81.in-addr.arpa) |
| 22:54.07 | *** join/#debian spectie (~fran@unaffiliated/spectie) |
| 22:56.12 | *** join/#debian TheCoffeMaker (~TheCoffeM@186.136.217.118) |
| 22:56.12 | *** join/#debian TheCoffeMaker (~TheCoffeM@unaffiliated/thecoffemaker) |
| 22:57.37 | *** join/#debian Caplain (~shayne@d14-69-122-103.try.wideopenwest.com) |
| 22:57.40 | *** join/#debian grimsley (~grimsley@2602:306:319e:c390:c00:e2c9:98c5:da5c) |
| 22:58.22 | *** join/#debian bolovanos_ (~bolovanos@91.201.22.5) |
| 23:00.16 | *** join/#debian controll (~a@217.124.218.87.dynamic.jazztel.es) |
| 23:00.32 | *** join/#debian sulfyr (~bob@unaffiliated/sulfyr) |
| 23:01.48 | *** join/#debian l0xas (~unix@138.36.34.13) |
| 23:01.48 | *** join/#debian l0xas (~unix@unaffiliated/l0xas) |
| 23:05.06 | *** join/#debian fernie (~jarkko@n4ucxyi7pr3p4qr4h-3.v6.elisa-mobile.fi) |
| 23:05.14 | *** join/#debian Fox682 (~fox@172.56.13.103) |
| 23:05.58 | *** join/#debian aroundthfur (~bla@84-114-87-141.dynamic.surfer.at) |
| 23:08.15 | *** join/#debian ScutulatIum (~scutulati@24.171.220.82) |
| 23:08.34 | *** join/#debian patterson (~patterson@73.93.143.97) |
| 23:10.53 | we6jbo2 | hi |
| 23:11.29 | we6jbo2 | I'm getting an error: Failed to fetch http://ftp.us.debian.org/debian/pool/main/a/apt/apt-transport-https_1.0.9.8.2_amd64.deb 404 Not Found [IP: 64.50.236.52 80] |
| 23:11.42 | *** join/#debian diniwed1 (~gavron@ool-45746e24.dyn.optonline.net) |
| 23:12.52 | DebianNewbie | I need help D: I installed LDAP and tried to use it as way to log in. My virtual machine now doesn't show any graphical interface and automatically denies the user I used to log in before |
| 23:12.57 | *** join/#debian amcorreia (~amcorreia@2804:7f5:280:9a2a::2) |
| 23:13.10 | awal1 | we6jbo2, may be just a temporal repository issue. try pointing apt to another mirrors |
| 23:16.32 | we6jbo2 | oh |
| 23:16.46 | we6jbo2 | How do I do that? |
| 23:17.16 | *** join/#debian LV-426 (~LV-426@2a02:ed0:53c6:500:ca60:ff:fe6a:1978) |
| 23:17.16 | *** join/#debian LV-426 (~LV-426@unaffiliated/lv-426) |
| 23:18.46 | *** join/#debian phorce1_home (~gvl2@cpe-70-115-5-210.gt.res.rr.com) |
| 23:18.46 | *** join/#debian phorce1_home (~gvl2@pdpc/supporter/active/phorce1) |
| 23:24.17 | *** join/#debian yk (~yk@123.20.41.20) |
| 23:24.18 | *** join/#debian yk (~yk@unaffiliated/yk) |
| 23:28.00 | *** mode/#debian [+l 1645] by debhelper |
| 23:28.26 | petn-randall | we6jbo2: When do you get this error? |
| 23:28.40 | petn-randall | ,v apt-transport-https |
| 23:28.41 | judd | Package: apt-transport-https on amd64 -- squeeze: 0.8.10.3+squeeze1; squeeze-security-lts: 0.8.10.3+squeeze7; wheezy-security: 0.9.7.9+deb7u6; wheezy: 0.9.7.9+deb7u7; jessie: 1.0.9.8.3; stretch: 1.2.13; sid: 1.2.14; experimental: 1.3~exp3 |
| 23:29.11 | petn-randall | we6jbo2: You need to run 'apt-get update' regularly to refresh the package list. |
| 23:32.07 | *** join/#debian foetus (~foetus@dslb-088-072-048-118.088.072.pools.vodafone-ip.de) |
| 23:33.01 | *** join/#debian magyar_ (~magyar@unaffiliated/magyar) |
| 23:33.43 | *** join/#debian socomm (~socomm@96-40-156-20.dhcp.mtpk.ca.charter.com) |
| 23:33.53 | *** join/#debian Butt3rfly (~Butt3rfly@trivialand/genius/butt3rfly) |
| 23:35.44 | DebianNewbie | Is there a way to check if one of my virtual machine is connected to the LDAP server located in another computer without trying to log in? |
| 23:36.18 | *** join/#debian RickXy (~zncadmin@115.99.100.29) |
| 23:36.48 | *** join/#debian foetus (~foetus@dslb-088-072-048-118.088.072.pools.vodafone-ip.de) |
| 23:36.55 | *** join/#debian GunshipPenguin (~GunshipPe@d75-155-205-164.bchsia.telus.net) |
| 23:38.01 | *** mode/#debian [+l 1638] by debhelper |
| 23:38.20 | *** join/#debian shad0VV (~shad0VV@46.246.235.106.dsl.dyn.forthnet.gr) |
| 23:41.51 | *** join/#debian lucdalton (~lucdalton@2a02:c7d:b7d9:5c00:74c2:648a:9bae:725a) |
| 23:46.28 | *** join/#debian lord_daemon (~newbie@unaffiliated/lord-daemon/x-3538029) |
| 23:46.53 | *** join/#debian snacs (~snacs.net@124-168-132-225.dyn.iinet.net.au) |
| 23:47.10 | *** join/#debian resixian (~akira@c-76-121-140-85.hsd1.wa.comcast.net) |
| 23:47.10 | *** join/#debian resixian (~akira@unaffiliated/resixian) |
| 23:49.34 | *** join/#debian benkard (~benkard@p200300864C0214011DC50AC2B8C969C6.dip0.t-ipconnect.de) |
| 23:49.47 | *** join/#debian kam270 (~kam270@103.240.241.126) |
| 23:50.06 | *** join/#debian Fox682 (~fox@172.56.13.103) |
| 23:51.34 | *** join/#debian GunshipPenguin (~GunshipPe@d75-155-205-164.bchsia.telus.net) |
| 23:52.01 | *** join/#debian GunshipPenguin (~GunshipPe@d75-155-205-164.bchsia.telus.net) |
| 23:52.05 | *** join/#debian JeDa (JeDa@unaffiliated/jeda) |
| 23:53.15 | *** join/#debian aaro1 (~aaro@unaffiliated/xyox/x-040147) |
| 23:54.39 | *** join/#debian yk (~yk@unaffiliated/yk) |
| 23:58.20 | *** join/#debian ki0 (~ki0@134.red-2-137-147.dynamicip.rima-tde.net) |
| 23:59.34 | *** join/#debian foetus (~norbi@dslb-088-072-048-118.088.072.pools.vodafone-ip.de) |
| 23:59.56 | *** join/#debian AfroThundr (~AfroThund@2601:147:c000:ef5e:50d1:e78b:cda9:e70d) |
