| 00:03.46 | *** join/#debian hmca (~hmca@2001:8a0:60db:9101:905e:4254:75da:5ab6) |
| 00:04.04 | tremon | nokt: yes, but if you only need it once it's easier to just set it on the command line: sudo ip addr add w.x.y.z/24 dev eth0 |
| 00:04.05 | *** join/#debian sm4sh (~smash@ip4-83-240-63-212.cust.nbox.cz) |
| 00:04.30 | *** join/#debian reverse_light (~reverse_l@ntszok054080.szok.nt.adsl.ppp.infoweb.ne.jp) |
| 00:04.44 | *** join/#debian jeep (~jeep@104.157.22.252) |
| 00:08.00 | *** mode/#debian [+l 1635] by debhelper |
| 00:08.53 | *** join/#debian johnnyfive (~johnnyfiv@unaffiliated/isalive) |
| 00:11.27 | *** join/#debian murfjr (~douseiais@185.21.216.185) |
| 00:13.07 | *** part/#debian menace (~knorr@unaffiliated/menace) |
| 00:14.01 | *** join/#debian cdbob (~cdbob@S0106bc4dfb7ac303.ed.shawcable.net) |
| 00:17.28 | *** join/#debian Stevie-O (~Stevie-O@pool-98-115-0-8.phlapa.fios.verizon.net) |
| 00:17.37 | Stevie-O | hello |
| 00:17.50 | bezaban | o/ |
| 00:18.00 | Stevie-O | something has gone wrong with one of my Debian machines and systemd is asking for the root password for maintenance |
| 00:18.24 | Stevie-O | unfortunately, I set this machine up years ago and have no idea what the root password is |
| 00:19.03 | Stevie-O | and init=/bin/sh or init=/bin/bash seems to be a non-starter, because it boots to a prompt, complains about not being able to access the tty, and I can't type |
| 00:19.15 | bezaban | hurray. I'm afraid I'm not sure I've done this with systemd, but you might be able to do it the old way... oh |
| 00:19.28 | Stevie-O | Yeah :( |
| 00:19.29 | *** join/#debian efdetonator (~efdetonat@177.206.199.23.dynamic.adsl.gvt.net.br) |
| 00:19.52 | tremon | are you booting without initramfs? |
| 00:19.57 | Stevie-O | uh |
| 00:20.00 | Stevie-O | I don't think so? |
| 00:20.14 | Stevie-O | I just tacked on 'init=/bin/bash' after the 'ro quiet' line in grub |
| 00:20.31 | tremon | I can't think of another reason why it couldn't access the tty |
| 00:20.37 | maurer | Stevie-O: So, this is not the "right way" to do it, but the easiest way may be to boot another linux boot media, chroot into your debian system, then run passwd |
| 00:20.47 | bezaban | you could always boot some live distro and change /etc/shadow |
| 00:20.47 | *** join/#debian Yukiteru (~Yukiteru@unaffiliated/yukiteru) |
| 00:21.02 | Stevie-O | yeah, I don't have any such thing handy and was hoping to avoid that |
| 00:21.04 | bezaban | or as maurer suggests |
| 00:21.29 | tremon | there's another way out then: use break=init to drop to a shell in the initramfs, and chroot from there |
| 00:21.39 | Stevie-O | break=init ? |
| 00:21.51 | Stevie-O | tries |
| 00:21.55 | Stevie-O | hold on, dog wants to go out |
| 00:22.08 | tremon | lemme check, not sure of the exact breakpoint |
| 00:22.14 | *** join/#debian hyfrehyfre (~hyfrehyfr@static-186-121-197-102.acelerate.net) |
| 00:22.25 | Stevie-O | <PROTECTED> |
| 00:22.28 | Stevie-O | and typing does nothing |
| 00:22.39 | *** join/#debian fstd_ (~fstd@unaffiliated/fisted) |
| 00:22.43 | tremon | usb keyboard? |
| 00:22.55 | tremon | the job control is just a warning, not an error |
| 00:23.30 | tremon | if you don't have the usb modules in the initramfs, usb keyboards won't work until the boot is quite far along |
| 00:24.03 | tremon | that also rules out the initramfs escape, and alternate boot/rescue media is your best option |
| 00:24.14 | jmcnaught | Stevie-O: you can also try adding "systemd.debug-shell" to the boot parameters, which should give you a root shell on tty9 during early boot |
| 00:24.58 | Stevie-O | ah |
| 00:25.04 | Stevie-O | yeah, it's a usb keyboard >:( |
| 00:25.10 | Stevie-O | okay imma have to run some errands then |
| 00:25.12 | *** part/#debian pencilandpaper (~skribblez@unaffiliated/pencilandpaper) |
| 00:25.14 | tremon | (just for the record, break=init would indeed be correct) |
| 00:25.50 | *** join/#debian Lokke (~Thunderbi@ip5f5ad235.dynamic.kabel-deutschland.de) |
| 00:25.50 | tremon | (at that point in the boot, the real root would be mounted at /root, not /) |
| 00:25.56 | maurer | Does anyone know if it's possible to convince xterm/urxvt/some other similar no-frills terminal to use two fonts, one as a fallback font? |
| 00:26.12 | maurer | I'm editing a file with a lot of unicode, and Source Code Pro doesn't have all the codepoints mapped |
| 00:26.26 | maurer | Unifont does, but is really ugly |
| 00:26.38 | maurer | I'd like to have my terminal use SCP if the codepoint is present, and Unifont otherwise |
| 00:28.00 | *** mode/#debian [+l 1627] by debhelper |
| 00:28.01 | *** join/#debian PlasmaStar (Plasma@unaffiliated/plasmastar) |
| 00:31.00 | maurer | Uh, nevermind, I figured it out. In case this shows up in a log search later, the answer is that you can comma separate your font list in your .Xdefaults file |
| 00:32.23 | *** join/#debian sm4sh (~smash@ip4-83-240-63-212.cust.nbox.cz) |
| 00:34.36 | *** join/#debian Marsjan (~marsjanin@elen.niewiarowski.it) |
| 00:36.54 | *** join/#debian controll (~a@233.94.223.87.dynamic.jazztel.es) |
| 00:39.47 | *** join/#debian Belkaar (~Belkaar@unaffiliated/belkaar) |
| 00:41.14 | *** join/#debian sndb (~kiri@komori.sandbag.in) |
| 00:44.19 | *** join/#debian awal1 (~awal1@199.241.132.84) |
| 00:45.02 | *** join/#debian pixdamix (~pix@unaffiliated/pixdamix) |
| 00:45.04 | *** join/#debian BWMerlin (~Thunderbi@142.45.233.220.static.exetel.com.au) |
| 00:45.35 | *** join/#debian pencilandpaper (~skribblez@unaffiliated/pencilandpaper) |
| 00:46.29 | *** join/#debian AC1D_FLOW (~AC1D_FLOW@189.122.61.234) |
| 00:46.31 | *** part/#debian pencilandpaper (~skribblez@unaffiliated/pencilandpaper) |
| 00:47.08 | *** join/#debian angerman (~m@bb219-75-53-219.singnet.com.sg) |
| 00:48.03 | *** join/#debian lesik (~lesik@p5DCF428A.dip0.t-ipconnect.de) |
| 00:49.25 | *** join/#debian Tetrazene (~Carp@2601:49:c302:560:41b4:b5d8:ae49:1908) |
| 00:50.55 | *** join/#debian sm4sh (~smash@ip4-83-240-63-212.cust.nbox.cz) |
| 00:52.01 | *** join/#debian jak2000 (~jak2000@189.244.142.161) |
| 00:52.04 | *** join/#debian SilverWhitefish (~hidden@68-200-88-239.res.bhn.net) |
| 00:52.23 | *** join/#debian rbern (~rbern@unaffiliated/rbern) |
| 00:53.49 | *** join/#debian pencilandpaper (~skribblez@dynamic-acs-24-101-226-127.zoominternet.net) |
| 00:53.59 | *** join/#debian pencilandpaper (~skribblez@unaffiliated/pencilandpaper) |
| 00:54.48 | *** part/#debian pencilandpaper (~skribblez@unaffiliated/pencilandpaper) |
| 00:54.54 | *** join/#debian marcidy (~marcidy@unaffiliated/marcidy) |
| 00:58.26 | *** join/#debian somazero (~somazero@ip72-198-80-101.ok.ok.cox.net) |
| 01:05.16 | *** join/#debian sidmo_ (~sidmo@p5489D524.dip0.t-ipconnect.de) |
| 01:07.19 | *** join/#debian sm4sh (~smash@ip4-83-240-63-212.cust.nbox.cz) |
| 01:07.54 | *** join/#debian blueness (~blueness@gentoo/developer/blueness) |
| 01:10.55 | *** join/#debian hackp_ (~hackp@cpe-75-181-82-48.carolina.res.rr.com) |
| 01:11.37 | *** join/#debian mutante (mutante@wikimedia/mutante) |
| 01:17.09 | *** join/#debian raonyguimaraes (~T0rch@89-79-132-230.dynamic.chello.pl) |
| 01:17.14 | *** join/#debian AlexLikeRock (~AlexLikeR@unaffiliated/alexlikerock) |
| 01:17.16 | AlexLikeRock | hi |
| 01:17.28 | AlexLikeRock | <PROTECTED> |
| 01:18.00 | *** mode/#debian [+l 1618] by debhelper |
| 01:18.05 | *** join/#debian GunshipPenguin (~GunshipPe@d75-155-205-164.bchsia.telus.net) |
| 01:19.42 | *** join/#debian internat (~nf@60-241-102-25.static.tpgi.com.au) |
| 01:21.00 | *** join/#debian hiexpo (~hiexpo@Aircrack-NG/User/hiexpo) |
| 01:21.48 | *** join/#debian AndyBotwin (~Gustavo@unaffiliated/andybotwin) |
| 01:22.25 | *** join/#debian TiCPU (~owrt@unaffiliated/ticpu) |
| 01:23.06 | *** join/#debian lelo (~lelo@unaffiliated/allure) |
| 01:23.29 | awal1 | AlexLikeRock, caring about privacy/security? Create your own mail server :P |
| 01:23.51 | dvs | be a Hilary! |
| 01:24.00 | AlexLikeRock | no awal1 |
| 01:24.16 | awal1 | or use hotmail/microsoft live :D :P |
| 01:24.17 | ZeuxBlack | is back from: $null - was away for: 2427wks 2days 24mins 28secs |
| 01:24.43 | *** join/#debian texla (~ray@h229.203.20.98.dynamic.ip.windstream.net) |
| 01:24.54 | TomTomTosch | ZeuxBlack: that script of yours running every day now? |
| 01:26.06 | *** join/#debian MoonkYang (~moonkyang@de.bbido.com.yang.red) |
| 01:26.42 | *** join/#debian wobeling1rs (~wobelinge@p54B1869D.dip0.t-ipconnect.de) |
| 01:27.35 | *** join/#debian curtis22 (~curtis@216-104-122-239.eastlink.ca) |
| 01:27.37 | *** join/#debian willmore (~willmore@98.220.133.20) |
| 01:27.54 | *** join/#debian Butt3rfly (~sona@37.152.228.218) |
| 01:27.54 | *** join/#debian Dr_Disk (~errNumb@gateway/vpn/privateinternetaccess/drdisk/x-96108029) |
| 01:28.29 | *** join/#debian Tetrazene (~Carp@2601:49:c302:560:41b4:b5d8:ae49:1908) |
| 01:29.35 | awal1 | AlexLikeRock, I guess people uses Tor because of privacy, security and anonymousness. But if you run tor but you will use google, yahoo, microsoft live... and adobe flash, pepperflash ..., for example, so anonymoussness = 0 |
| 01:31.39 | awal1 | not sure about html5 (multimedia contents), if it uses tracking cookies and similar stuff |
| 01:32.00 | TomTomTosch | which the tor browser blocks. |
| 01:32.20 | awal1 | right |
| 01:32.33 | *** join/#debian Yukiteru (~Yukiteru@unaffiliated/yukiteru) |
| 01:33.50 | TomTomTosch | the problem with those providers mentioned above is that they make you leave either your phone number or a second email address. there are a few which don't, you will find them with a quick search. |
| 01:35.00 | *** join/#debian frg (~frg@c-73-27-72-31.hsd1.fl.comcast.net) |
| 01:36.11 | frg | hi - is there a way in the debian expert graphical install to install grub to /sda3 rather than the default /sda? |
| 01:36.12 | awal1 | if found, it will be an unsolvable truthfulness problematic... |
| 01:36.52 | *** join/#debian skrb_ (~skrb@p5B0F106F.dip0.t-ipconnect.de) |
| 01:37.03 | TomTomTosch | you are not meant to put personal information on that, obviously. |
| 01:37.40 | frg | having some recurring efi/bootloader issues... thanks |
| 01:37.51 | *** join/#debian galex-713 (~galex-713@static-176-158-131-7.ftth.abo.bbox.fr) |
| 01:38.26 | awal1 | frg, with standard install the installer ask you where you want the grub, i believe expert mode does too; thats EXPERT MODE |
| 01:38.45 | *** join/#debian mastokley (~mastokley@75-165-54-193.tukw.qwest.net) |
| 01:40.24 | frg | hmm, i'm using the dvd on usb, do you mean the cd installer? |
| 01:41.02 | frg | the dvd definitely does not ask - nor does the expert graphical |
| 01:41.52 | *** join/#debian x032cx (~lxuser@unaffiliated/tdis) |
| 01:41.56 | awal1 | havent have to use expert mode bcoz of x reason, so no clue, sorry |
| 01:42.06 | frg | i mean, it asks to install or skip near the end after everything else is installed - but no other options |
| 01:42.14 | awal1 | I haven't had ^ |
| 01:42.56 | frg | ok - so the automated install will ask where to install grub? |
| 01:43.09 | awal1 | yeah |
| 01:43.56 | frg | hmm - i thought i tried that... and it just auto installs to /sda |
| 01:44.27 | *** join/#debian raonyguimaraes (~T0rch@89-79-132-230.dynamic.chello.pl) |
| 01:44.50 | *** join/#debian mfyll (~mfyll@public-vip01.theserver.no) |
| 01:44.55 | frg | it used to work, but the newer grub with 8.5 is giving me problems |
| 01:45.14 | *** join/#debian Pscion (~chatzilla@ip98-167-195-74.ph.ph.cox.net) |
| 01:45.33 | awal1 | you will have 2 options when in grub-install step: /dev/sda or "...manually...", I dont rember the exact sentence; also I I always used sda, so no clue what happens if you choose manual |
| 01:45.54 | frg | but thanks for the info |
| 01:46.26 | *** join/#debian badiane (~badiane@64.58.67.5) |
| 01:47.21 | frg | ok - are you refering to the non-graphical auto debian installer? |
| 01:47.42 | awal1 | frg, the expert mode should have more option then the automated one, that's why it's called expert |
| 01:48.04 | awal1 | both graphical and text modes will offer you that choice |
| 01:48.26 | frg | thank you, i presumed as much, but theres no such options there |
| 01:49.09 | awal1 | I usually use netinst cd, and it does |
| 01:49.29 | *** join/#debian Hunterkll (~Hunterkll@2001:470:8b06:100:7d83:b1cf:1704:4207) |
| 01:49.32 | frg | oh, ok |
| 01:49.34 | awal1 | all the time playing with debian installs in VM's , so no doubt |
| 01:50.19 | awal1 | frg, talking about debian iso's , right? |
| 01:50.59 | frg | well, i'll give that a try - it will at least fail quicker if it doesnt work for me - ha |
| 01:51.46 | frg | yes, 8.5 dvd1 |
| 01:52.48 | frg | both auto graphical and expert graphical have only two grub options - install to /sda or skip |
| 01:53.03 | awal1 | with minimal install (no DE), you reach that step in 10/15 minutes |
| 01:53.12 | awal1 | no clue about dvd iso |
| 01:53.22 | awal1 | try netinst |
| 01:54.15 | awal1 | shouldn't be different in that feature, I believe |
| 01:55.02 | awal1 | the installer, the technical side is the same no matters which iso you choose; the difference is the content |
| 01:57.27 | frg | ok nice - |
| 01:57.28 | frg | just one quick question (the reason i didnt keep netinst before) |
| 01:57.28 | frg | a game, 0ad appeared red in synaptic with the netinst base - how would i fix that? |
| 01:57.30 | frg | i assume missing underlying dependencies? |
| 01:57.30 | *** kick/#debian [frg!~debhelper@unaffiliated/debhelper] by debhelper (flood. Please use http://paste.debian.net instead.) |
| 01:57.36 | awal1 | windows needs 3 or 5 hours for finish the install and around 24/48 hours for updates (pack 1, 2 ...) |
| 01:58.15 | *** join/#debian AusteritySucks (~Austerity@unaffiliated/austeritysucks) |
| 01:59.26 | *** join/#debian AlexLikeRock2 (~AlexLikeR@200.92.80.10) |
| 02:03.53 | *** join/#debian AndyBotwin (~Gustavo@unaffiliated/andybotwin) |
| 02:05.38 | *** join/#debian jim_carry (~jim_carry@unaffiliated/jim-carry/x-1372289) |
| 02:06.35 | AlexLikeRock2 | whow to make a email by browser tor |
| 02:06.37 | AlexLikeRock2 | ?? |
| 02:08.01 | *** mode/#debian [+l 1611] by debhelper |
| 02:10.23 | markybob | !tell AlexLikeRock2 about es |
| 02:11.23 | *** join/#debian sm4sh (~smash@ip4-83-240-63-212.cust.nbox.cz) |
| 02:11.39 | *** join/#debian theviajerock (~victor@cable201-232-160-169.epm.net.co) |
| 02:12.12 | *** join/#debian c0mrad3 (uid26809@gateway/web/irccloud.com/x-wqpkhochldnfzeux) |
| 02:12.49 | *** join/#debian Korolev (~Korolev@2601:586:c403:a570:81c1:15e2:86f3:7d28) |
| 02:13.32 | *** join/#debian tobinski_ (~tobinski@p5DE0C4E4.dip0.t-ipconnect.de) |
| 02:15.10 | *** join/#debian acidfu_ (~acidfoo@208.114.164.73) |
| 02:15.31 | *** join/#debian neitzer (~neitzer@108-64-84-127.lightspeed.tukrga.sbcglobal.net) |
| 02:16.02 | *** join/#debian jim_carry (~jim_carry@unaffiliated/jim-carry/x-1372289) |
| 02:16.11 | *** join/#debian cra1g321 (~user@5.80.165.228) |
| 02:17.45 | *** join/#debian cnsy (~cnsy@unaffiliated/cnsy) |
| 02:21.57 | *** join/#debian jim_carry (~jim_carry@unaffiliated/jim-carry/x-1372289) |
| 02:23.23 | *** join/#debian sm4sh (~smash@ip4-83-240-63-212.cust.nbox.cz) |
| 02:23.27 | awal1 | AlexLikeRock2, what you want exactly? |
| 02:24.56 | *** join/#debian wobelingers (~wobelinge@p54B1869D.dip0.t-ipconnect.de) |
| 02:25.54 | awal1 | if you want to be anonymous, create your own mail server if you know how; if you want send recieve e.mails search for mail servers which doesn't require javascripts, which doesn't use tracking/persistent cookies and similar stuff |
| 02:26.26 | *** join/#debian hexagoxel (~hexagoxel@p5B29AF4F.dip0.t-ipconnect.de) |
| 02:27.31 | *** join/#debian internat (~nf@60-241-102-25.static.tpgi.com.au) |
| 02:27.49 | awal1 | anonymousness is hard, very hard to achieve really |
| 02:28.44 | *** join/#debian aindilis (~aindilis@173-165-36-107-Illinois.hfc.comcastbusiness.net) |
| 02:29.17 | *** join/#debian sm4sh (~smash@ip4-83-240-63-212.cust.nbox.cz) |
| 02:31.32 | awal1 | AlexLikeRock2, start with https://en.wikipedia.org/wiki/Anonymous_web_browsing |
| 02:31.51 | *** join/#debian MrC0de (mrc0de@cpe-24-25-204-166.san.res.rr.com) |
| 02:32.05 | *** join/#debian MaBunny (~Peter@117.194.198.35) |
| 02:32.32 | AlexLikeRock2 | i done |
| 02:32.34 | AlexLikeRock2 | i make |
| 02:32.37 | AlexLikeRock2 | <PROTECTED> |
| 02:32.38 | *** join/#debian booboy_laptop (~booboy@159.203.86.114) |
| 02:33.39 | *** join/#debian KindOne_ (kindone@freenude/topless/kindone) |
| 02:33.54 | *** join/#debian mumixam (~m@unaffiliated/mumixam) |
| 02:35.36 | *** join/#debian sm4sh (~smash@ip4-83-240-63-212.cust.nbox.cz) |
| 02:36.05 | *** join/#debian internat (~nf@60-241-102-25.static.tpgi.com.au) |
| 02:37.02 | *** join/#debian bp0 (~bp@unaffiliated/bp0) |
| 02:37.32 | *** join/#debian GunshipPenguin (~GunshipPe@d207-6-48-34.bchsia.telus.net) |
| 02:39.27 | *** join/#debian crafty1 (~rdamminge@2601:98b:8201:3078:c5f0:19e7:f1fa:d275) |
| 02:44.30 | *** join/#debian chachasmooth (~chachasmo@unaffiliated/chachasmooth) |
| 02:44.55 | *** join/#debian Bennux (~Bennux@186-107-156-188.baf.movistar.cl) |
| 02:45.07 | *** join/#debian Velveeta_Chef (~secure@24-151-37-213.dhcp.nwtn.ct.charter.com) |
| 02:45.32 | *** join/#debian Velveeta_Chef (~secure@fsf/member/Velveeta-Chef) |
| 02:48.18 | *** join/#debian Velveeta_Chef (~Nope@24-151-37-213.dhcp.nwtn.ct.charter.com) |
| 02:48.18 | *** join/#debian Velveeta_Chef (~Nope@fsf/member/Velveeta-Chef) |
| 02:48.53 | *** join/#debian arcvile (~quassel@108-245-107-91.lightspeed.sbndin.sbcglobal.net) |
| 02:49.55 | *** join/#debian internat (~nf@60-241-102-25.static.tpgi.com.au) |
| 02:50.20 | *** join/#debian efdetonator (~efdetonat@177.206.199.23.dynamic.adsl.gvt.net.br) |
| 02:53.45 | *** part/#debian xcel_ (~xcel@149.13.91.75) |
| 02:54.58 | *** join/#debian Mortumm (~Mortumtz@t157.ip1.netikka.fi) |
| 02:55.08 | *** join/#debian sm4sh (~smash@ip4-83-240-63-212.cust.nbox.cz) |
| 02:55.15 | *** join/#debian cra1g321 (~craig@5.80.165.228) |
| 02:56.53 | *** join/#debian GunshipPenguin (~GunshipPe@d207-6-48-34.bchsia.telus.net) |
| 02:57.17 | *** join/#debian GunshipPenguin (~GunshipPe@d207-6-48-34.bchsia.telus.net) |
| 02:57.38 | *** join/#debian phelpsiv (~phelpsiv@c-50-139-41-1.hsd1.or.comcast.net) |
| 02:57.55 | *** part/#debian phelpsiv (~phelpsiv@c-50-139-41-1.hsd1.or.comcast.net) |
| 02:59.27 | *** join/#debian phelpsiv (~phelpsiv@c-50-139-41-1.hsd1.or.comcast.net) |
| 02:59.37 | *** join/#debian awal1_ (~awal1@199.241.132.84) |
| 03:01.40 | *** join/#debian sm4sh (~smash@ip4-83-240-63-212.cust.nbox.cz) |
| 03:02.08 | *** part/#debian phelpsiv (~phelpsiv@c-50-139-41-1.hsd1.or.comcast.net) |
| 03:03.32 | *** join/#debian klow (~textual@c-98-247-49-57.hsd1.wa.comcast.net) |
| 03:03.53 | *** join/#debian internat (~nf@60-241-102-25.static.tpgi.com.au) |
| 03:04.19 | *** join/#debian SilverWhitefish (~hidden@68-200-88-239.res.bhn.net) |
| 03:04.25 | *** join/#debian awal1 (~awal1@199.241.132.84) |
| 03:04.40 | *** join/#debian TurBoss (~Jauria@71.217.15.37.dynamic.jazztel.es) |
| 03:04.45 | TurBoss | Hi |
| 03:05.05 | TurBoss | I'm on debian Jessie and i'm trying to install zoneminder from backports |
| 03:05.11 | *** join/#debian earthundead (~earthunde@78.25.123.2) |
| 03:06.26 | TurBoss | on aan it tells that libpam-systemd has no candidate |
| 03:06.35 | TurBoss | is a fresh install |
| 03:07.50 | *** join/#debian RA3OR (~demon@unaffiliated/ra3or) |
| 03:08.05 | *** join/#debian Phate (~Phate@2601:1c2:4a00:fb24:4444:4858:842c:2bb7) |
| 03:09.08 | *** join/#debian bhurstpdx1 (~bhurstpdx@c-24-21-131-224.hsd1.or.comcast.net) |
| 03:12.56 | *** join/#debian jass93 (~ifillj@dhcp-18-111-72-71.dyn.mit.edu) |
| 03:13.22 | *** join/#debian austin987 (~null@cpe-72-182-39-163.austin.res.rr.com) |
| 03:16.37 | *** join/#debian kuldeep (~kuldeepdh@unaffiliated/kuldeepdhaka) |
| 03:17.49 | *** join/#debian murfjr (~douseiais@185.21.216.185) |
| 03:19.31 | *** join/#debian internat (~nf@60-241-102-25.static.tpgi.com.au) |
| 03:20.06 | *** join/#debian sm4sh (~smash@ip4-83-240-63-212.cust.nbox.cz) |
| 03:20.19 | kuldeep | Hello, anyone would like to be a mantainer for our not-for-profit softwares (Data Acquisition - Scientific Software). you can know about us at http://madresistor.org/ and get all the source code from https://gitlab.com/madresistor/ All our softwares are released under GNU GPLv3+ |
| 03:20.49 | kuldeep | *not-for-profit organisation softwares |
| 03:21.24 | kuldeep | and all hardware design are also under GNU GPLv3+ (Open Hardware) |
| 03:21.37 | *** join/#debian treaki__ (~treaki@p5B11CD87.dip0.t-ipconnect.de) |
| 03:23.22 | Stevie-O | gah |
| 03:23.27 | Stevie-O | I can't get a freaking usb stick to boot |
| 03:23.55 | *** join/#debian GunshipPenguin (~GunshipPe@d207-6-48-34.bchsia.telus.net) |
| 03:24.23 | *** join/#debian GunshipPenguin (~GunshipPe@d207-6-48-34.bchsia.telus.net) |
| 03:24.47 | *** join/#debian GunshipPenguin (~GunshipPe@d207-6-48-34.bchsia.telus.net) |
| 03:25.13 | *** join/#debian GunshipPenguin (~GunshipPe@d207-6-48-34.bchsia.telus.net) |
| 03:25.38 | *** join/#debian GunshipPenguin (~GunshipPe@d207-6-48-34.bchsia.telus.net) |
| 03:29.21 | kuldeep | Stevie-O, boot configuration ok? |
| 03:29.39 | *** join/#debian weilancys (~Thunderbi@113.128.75.121) |
| 03:29.40 | Stevie-O | not sure what you're referring to |
| 03:29.43 | kuldeep | BIOS or whatever you have |
| 03:29.46 | *** join/#debian Tempesta (~Tempesta@unaffiliated/tempesta) |
| 03:29.54 | Stevie-O | I have no reason to believe it's not |
| 03:30.26 | *** part/#debian TurBoss (~Jauria@71.217.15.37.dynamic.jazztel.es) |
| 03:30.55 | *** part/#debian weilancys (~Thunderbi@113.128.75.121) |
| 03:31.16 | kuldeep | Stevie-O, at boot time, you could press <special-key-as-per-your-hardware> to give you a list of bootable medium |
| 03:31.29 | Stevie-O | yes, I'm doing that |
| 03:31.35 | kuldeep | usually F12 F2 etc.. |
| 03:31.37 | Stevie-O | the problem is that I keep getting boot errors |
| 03:31.43 | Stevie-O | (F11 on ASRock BIOS) |
| 03:32.07 | kuldeep | Stevie-O, boot errors? (kernel)? |
| 03:32.17 | Stevie-O | I have tried three different ways so far |
| 03:32.36 | Stevie-O | (1) UUI (2) UNetBootIn (3) Rawrite32 |
| 03:32.56 | Stevie-O | pulling down a fresh Debian Live image for next test |
| 03:33.02 | *** join/#debian patterson_ (~patterson@73.93.142.214) |
| 03:34.10 | *** join/#debian internat (~nf@60-241-102-25.static.tpgi.com.au) |
| 03:34.23 | *** join/#debian de-facto_ (~de-facto@unaffiliated/de-facto) |
| 03:36.21 | *** join/#debian dkas (~dkas@p4FEAA36C.dip0.t-ipconnect.de) |
| 03:36.33 | *** join/#debian stephanie92 (~stephanie@c-71-57-140-3.hsd1.fl.comcast.net) |
| 03:37.15 | Stevie-O | okay, newest live image seems to be working |
| 03:38.00 | *** mode/#debian [+l 1604] by debhelper |
| 03:38.20 | *** join/#debian llucenic (~Thunderbi@rev-185-22-215-103.radiolan.sk) |
| 03:40.20 | *** join/#debian SpaceAce (~SpaceAce@203-206-30-11.dyn.iinet.net.au) |
| 03:41.15 | Stevie-O | well this isn't good |
| 03:41.26 | Stevie-O | lvm2 postinst is hanging |
| 03:41.59 | *** join/#debian krups (~krups@unaffiliated/krups) |
| 03:42.13 | *** join/#debian pitiye (~pitiye@112.134.81.115) |
| 03:42.23 | Stevie-O | what the hell is wrong with this machine? :( |
| 03:43.02 | *** join/#debian evanvarvell (~evanvarve@97-88-184-50.dhcp.stls.mo.charter.com) |
| 03:43.55 | *** join/#debian internat (~nf@60-241-102-25.static.tpgi.com.au) |
| 03:44.42 | *** join/#debian sm4sh (~smash@ip4-83-240-63-212.cust.nbox.cz) |
| 03:44.49 | *** join/#debian Cavedude (~Cavedude@unaffiliated/cavedude) |
| 03:44.51 | *** join/#debian vmod (~vmod@120.60.133.199) |
| 03:49.47 | *** join/#debian internat (~nf@60-241-102-25.static.tpgi.com.au) |
| 03:51.00 | *** join/#debian sm4sh (~smash@ip4-83-240-63-212.cust.nbox.cz) |
| 03:51.23 | *** join/#debian nokt (~nokt@181.46.158.157) |
| 03:51.27 | *** join/#debian Yukiteru (~Yukiteru@unaffiliated/yukiteru) |
| 03:53.18 | Stevie-O | unit systemdremount-fs.service has failed |
| 03:54.19 | *** join/#debian Shentino (~Shentino@gentoo/contributor/shentino) |
| 03:55.42 | *** join/#debian s4ndm4n (~sandman@27.34.56.201) |
| 03:55.42 | *** join/#debian s4ndm4n (~sandman@unaffiliated/sandman13) |
| 03:58.02 | *** join/#debian internat (~nf@60-241-102-25.static.tpgi.com.au) |
| 03:59.18 | *** join/#debian SpaceAce (~SpaceAce@124-170-159-172.dyn.iinet.net.au) |
| 03:59.21 | *** join/#debian MaBunny (~Peter@117.194.208.197) |
| 03:59.47 | *** join/#debian Rusty1_ (~kanotix@cpe-24-194-200-69.nycap.res.rr.com) |
| 04:05.08 | *** join/#debian canopus (~canopus@unaffiliated/pierrot) |
| 04:07.19 | *** join/#debian asterismo_m (~asterismo@179.26.171.147) |
| 04:08.00 | *** mode/#debian [+l 1598] by debhelper |
| 04:08.03 | *** join/#debian asterismo_m (~asterismo@179.26.171.147) |
| 04:08.15 | *** join/#debian michaelni (~michael@chello213047041020.graz.surfer.at) |
| 04:08.15 | *** join/#debian asterismo_m (~asterismo@179.26.171.147) |
| 04:08.25 | *** join/#debian asterismo_m (~asterismo@179.26.171.147) |
| 04:08.35 | *** join/#debian asterismo_m (~asterismo@179.26.171.147) |
| 04:09.09 | *** join/#debian asterismo_m (~asterismo@179.26.171.147) |
| 04:09.21 | *** join/#debian asterismo_m (~asterismo@179.26.171.147) |
| 04:14.46 | *** join/#debian SpaceAce (~SpaceAce@124-170-159-172.dyn.iinet.net.au) |
| 04:15.21 | *** join/#debian Nickle1 (~xu@58.210.62.50) |
| 04:15.33 | *** join/#debian BenNZ (~Ben__@118-93-28-232.dsl.dyn.ihug.co.nz) |
| 04:18.41 | *** join/#debian SilverWhitefish (~hidden@68-200-88-239.res.bhn.net) |
| 04:20.36 | *** join/#debian Strife89 (~quassel@adsl-98-80-185-110.mcn.bellsouth.net) |
| 04:21.07 | *** part/#debian Stevie-O (~Stevie-O@pool-98-115-0-8.phlapa.fios.verizon.net) |
| 04:22.02 | ZeuxBlack | is back from: $null - was away for: 2427wks 2days 3hrs 22mins 12secs |
| 04:24.30 | *** part/#debian Nickle1 (~xu@58.210.62.50) |
| 04:24.59 | *** join/#debian master_o1_master (~master_of@p4FF245B0.dip0.t-ipconnect.de) |
| 04:27.39 | *** join/#debian internat (~nf@60-241-102-25.static.tpgi.com.au) |
| 04:28.26 | *** join/#debian Velveeta_Chef (~Nope@fsf/member/Velveeta-Chef) |
| 04:28.47 | *** join/#debian boudiccas (~boudiccas@13.195.125.91.dyn.plus.net) |
| 04:29.53 | *** join/#debian Nnnavd (~Nnavd@d50-92-9-182.bchsia.telus.net) |
| 04:29.58 | *** join/#debian veebull_ (~veebull@66.172.107.27) |
| 04:31.01 | *** join/#debian supersoju (~ajones@c-73-69-169-212.hsd1.vt.comcast.net) |
| 04:32.35 | *** join/#debian prototron (~prototron@cable-192.222.220.114.electronicbox.net) |
| 04:32.45 | prototron | hell |
| 04:32.46 | prototron | hello |
| 04:34.04 | *** join/#debian internat (~nf@60-241-102-25.static.tpgi.com.au) |
| 04:34.05 | prototron | Hey I am trying to mount my NFS share with specific user/group ownership but I can't get it to work |
| 04:34.08 | *** join/#debian badiane (~badiane@cpe-24-193-80-159.nyc.res.rr.com) |
| 04:35.05 | *** join/#debian Rust3dCor3 (~Rust3dCor@unaffiliated/rust3dcor3) |
| 04:36.06 | prototron | i user fstab to mount it |
| 04:36.11 | prototron | i use * |
| 04:38.20 | *** join/#debian timahvo1 (~rogue@197.237.131.64) |
| 04:38.45 | *** join/#debian Epakai (~coweater@96.226.15.117) |
| 04:40.53 | *** join/#debian Strife89 (~quassel@adsl-98-80-187-162.mcn.bellsouth.net) |
| 04:41.43 | *** join/#debian sm4sh (~smash@ip4-83-240-63-212.cust.nbox.cz) |
| 04:43.38 | *** join/#debian socomm (~socomm@96-40-156-20.dhcp.mtpk.ca.charter.com) |
| 04:43.39 | *** join/#debian Strife89|Quassel (~quassel@adsl-98-67-58-83.mcn.bellsouth.net) |
| 04:45.00 | veggi3s0 | any of you use Stretch instead of jessie version? |
| 04:45.08 | veggi3s0 | i just started using stretch today |
| 04:45.30 | *** join/#debian internat (~nf@60-241-102-25.static.tpgi.com.au) |
| 04:45.59 | *** join/#debian poeticrpm (~poeticrpm@109.163.226.153) |
| 04:47.23 | *** join/#debian borei (~dan@node-1w7jr9qle4x5ix2kjybp8d4fv.ipv6.telus.net) |
| 04:47.31 | borei | hi all |
| 04:47.55 | borei | i have qestion about multiboot USB drive(hdd or flash) |
| 04:48.00 | *** join/#debian Cabanossi (~Cabanossi@p5DD7A38E.dip0.t-ipconnect.de) |
| 04:48.18 | borei | i created it for debian, once there were only one ISO everything were working ok |
| 04:48.35 | *** join/#debian ShapeShifter499 (~ShapeShif@unaffiliated/shapeshifter499) |
| 04:48.47 | borei | i added ubuntu 16, and now debian installed is picking ubuntu 16 iso |
| 04:49.35 | borei | in the log i see that it's trying debian iso, detecting it as jessiw, but finally picking ubuntu |
| 04:50.02 | borei | any idea about it ? |
| 04:54.10 | *** join/#debian Gnomethrower (~B@unaffiliated/gnomethrower) |
| 04:55.50 | *** join/#debian angerman (~m@bb219-75-53-219.singnet.com.sg) |
| 04:56.15 | *** join/#debian internat (~nf@60-241-102-25.static.tpgi.com.au) |
| 04:56.53 | *** join/#debian cnsy (~cnsy@unaffiliated/cnsy) |
| 04:57.12 | zykotick9 | veggi3s0: try #debian-next on the OFTC network, you'll find testing/unstable users there. |
| 04:57.15 | *** join/#debian Mortumm (~Mortumtz@t157.ip1.netikka.fi) |
| 04:58.38 | *** join/#debian x032cx (~lxuser@unaffiliated/tdis) |
| 04:58.40 | *** join/#debian gnugr_ (~gnugr@ppp-2-85-36-164.home.otenet.gr) |
| 05:01.38 | *** join/#debian soee (~soee@user-164-127-128-179.play-internet.pl) |
| 05:02.10 | *** join/#debian sm4sh (~smash@ip4-83-240-63-212.cust.nbox.cz) |
| 05:05.12 | *** join/#debian angerman (~m@bb219-75-53-219.singnet.com.sg) |
| 05:06.30 | *** join/#debian btf (~btf@185.83.12.159) |
| 05:06.52 | *** join/#debian jaggz (~jaggz@unaffiliated/jaggz) |
| 05:07.17 | jaggz | how do I update specific packages, which may not be manually installed (but may be dependencies)? |
| 05:07.22 | *** join/#debian sm4sh (~smash@ip4-83-240-63-212.cust.nbox.cz) |
| 05:07.52 | *** join/#debian serduk (~IceChat78@193.110.113.74) |
| 05:07.53 | *** join/#debian sphenxes02 (~sphenxes@178-191-168-121.adsl.highway.telekom.at) |
| 05:09.31 | *** join/#debian internat (~nf@60-241-102-25.static.tpgi.com.au) |
| 05:09.42 | *** join/#debian veebull_ (~veebull@66.172.107.27) |
| 05:11.46 | *** join/#debian steveballmer (~arch-linu@173.153.35.219) |
| 05:14.00 | *** join/#debian philipballew (~philip@ubuntu/member/philipballew) |
| 05:15.57 | *** join/#debian sm4sh (~smash@ip4-83-240-63-212.cust.nbox.cz) |
| 05:16.27 | *** join/#debian tacocat (~GLolol@unaffiliated/glolol) |
| 05:16.30 | *** join/#debian internat (~nf@60-241-102-25.static.tpgi.com.au) |
| 05:17.24 | *** join/#debian N3X15 (~Rob@2602:ae:18f0:5400:a0e9:44c0:e147:3e3e) |
| 05:17.56 | *** join/#debian ffatman (~tupac-ama@2a01:e35:8ad7:6b60:5097:7f62:1eda:9920) |
| 05:18.47 | *** join/#debian txtd (~txd@c-98-199-246-132.hsd1.tx.comcast.net) |
| 05:26.03 | *** join/#debian aaro (~aaro@unaffiliated/xyox/x-040147) |
| 05:26.19 | *** join/#debian Guest85892 (~sona@trivialand/genius/butt3rfly) |
| 05:26.57 | *** join/#debian Pwnna (~Pwnna@mushroom.thekks.net) |
| 05:28.46 | Pwnna | not sure if this is the right place to ask but i figure i'd give it a shot: is there a way to use overlayfs but exclude one path in the merged path? |
| 05:29.21 | *** join/#debian jaggz (~jaggz@unaffiliated/jaggz) |
| 05:29.23 | Pwnna | so lower => /srv/base-image, upper => /srv/upper, merged => /srv/combined, and then /srv/combined/data is mount to /dev/sdb or something like that |
| 05:29.59 | *** join/#debian lucaswang (~lucaswang@14.47.125.218) |
| 05:32.31 | *** join/#debian internat (~nf@60-241-102-25.static.tpgi.com.au) |
| 05:32.42 | *** join/#debian agurs (~t7DS@179.178.197.75) |
| 05:36.13 | MaBunny | does ubuntu hav a pip command? |
| 05:37.49 | *** join/#debian babak (uid19622@gateway/web/irccloud.com/x-xvtqsekdjtunfewr) |
| 05:39.38 | *** join/#debian internat (~nf@60-241-102-25.static.tpgi.com.au) |
| 05:39.52 | imr | MaBunny: yes, it should. If it isn't installed just install python-pip or python3-pip from apt-get |
| 05:40.38 | MaBunny | ok i just found tht debian has it too |
| 05:41.24 | borei | solved |
| 05:45.08 | *** join/#debian soee (~soee@user-109-243-162-247.play-internet.pl) |
| 05:50.22 | plasmoduck | How can I show the motd at the login screen before I login? |
| 05:50.43 | plasmoduck | or some kind of msg |
| 05:50.57 | *** join/#debian de-facto (~de-facto@unaffiliated/de-facto) |
| 05:53.13 | *** join/#debian JPT (~jpt@classified.name) |
| 05:56.35 | *** join/#debian sm4sh (~smash@ip4-83-240-63-212.cust.nbox.cz) |
| 05:58.00 | *** mode/#debian [+l 1591] by debhelper |
| 05:59.01 | *** join/#debian badiane (~badiane@cpe-24-193-80-159.nyc.res.rr.com) |
| 06:00.18 | *** join/#debian we6jbo2 (~we6jbo2@cpe-75-80-39-152.san.res.rr.com) |
| 06:01.23 | *** join/#debian gtrotcko (~Thunderbi@bzq-82-81-213-77.cablep.bezeqint.net) |
| 06:01.34 | *** join/#debian sm4sh (~smash@ip4-83-240-63-212.cust.nbox.cz) |
| 06:04.33 | *** join/#debian Kenrin (~kenrin@68-112-23-82.dhcp.ahvl.nc.charter.com) |
| 06:05.36 | *** join/#debian internat (~nf@60-241-102-25.static.tpgi.com.au) |
| 06:12.23 | *** join/#debian bertbob (~bertbob@reriding.dsl.xmission.com) |
| 06:15.17 | *** join/#debian internat (~nf@60-241-102-25.static.tpgi.com.au) |
| 06:16.32 | *** join/#debian fearnothing (~nothing@unaffiliated/fearnothing) |
| 06:17.58 | Pwnna | what's a "secure" way to get jessie backport stuff? |
| 06:18.02 | Pwnna | like i want to upgrade the kernel |
| 06:19.07 | *** join/#debian BenNZ (~Ben__@118-93-28-232.dsl.dyn.ihug.co.nz) |
| 06:19.35 | stephanie92 | O-o |
| 06:20.01 | stephanie92 | Pwnna: Just add the backports repo to your sources.list - update and then install whichever backported kernel you please. |
| 06:20.25 | Pwnna | stephanie92: i see the current latest in bp is like linux-image-4.6.0-0.bpo.1-amd64 |
| 06:20.36 | Pwnna | but linux-image-amd64 is not pointed to that |
| 06:20.46 | Pwnna | so if there's an update to the linux-image in backports i won't get it unless i default to it |
| 06:21.02 | Pwnna | unless linux-image-amd64 defaults to bp****8 |
| 06:21.05 | Pwnna | does that make sense? |
| 06:21.25 | stephanie92 | linux-image-4.6.0-0.bpo.1-rt-amd64 |
| 06:21.28 | stephanie92 | that is the one you want |
| 06:21.36 | stephanie92 | if you want the latest one, that is |
| 06:21.40 | Pwnna | rt? |
| 06:21.52 | jim | realtime |
| 06:22.03 | Pwnna | i don't need realtime stuff? |
| 06:22.03 | *** join/#debian SilverWhitefish (~hidden@68-200-88-239.res.bhn.net) |
| 06:22.17 | jim | ok |
| 06:22.24 | Pwnna | my problem is let's say if jessie-backports gets a security update or something for 4.6 |
| 06:22.42 | *** join/#debian dionysus69 (~Icedove@unaffiliated/dionysus69) |
| 06:22.44 | Pwnna | since linux kernel images are packaged per version.. and i'm explicitly installing linux-image-4.6.0-0.bpo.1-amd64 |
| 06:22.50 | Pwnna | i will not get 4.6.1 or something |
| 06:22.53 | Pwnna | does that make sense? |
| 06:22.59 | jim | you could try apt-cache search linux-image to see what'e there |
| 06:23.00 | stephanie92 | jim$: lmao |
| 06:23.17 | Pwnna | yeah i looked around and i don't see a meta package from backports that points to the latest backported version :/ |
| 06:23.26 | stephanie92 | Pwnna: if there is an upgrade for your kernel, it will upgrade when you apt-get update/upgrade |
| 06:23.34 | *** join/#debian AngeFede (~f3d3@2a01:e34:ee83:bd10:85c1:b388:d555:506a) |
| 06:23.37 | Pwnna | how would it know? |
| 06:23.47 | stephanie92 | Pwnna: because that's the way the package manager works. |
| 06:23.53 | stephanie92 | by-design |
| 06:24.03 | stephanie92 | it would be a pretty shitty package manager if it didn't |
| 06:24.09 | Pwnna | that implies that the package maintainer needs to update linux-image-4.6.0-0.bpo.1-amd64 |
| 06:24.14 | Pwnna | rather than releasing linux-image-4.6.1-0.bpo.1-amd64 |
| 06:24.22 | Pwnna | and use meta packages to update the dependency |
| 06:24.29 | Pwnna | which is what traditionally debian packages for the kernel does |
| 06:24.38 | stephanie92 | yep |
| 06:24.40 | Pwnna | except for backports, there's no meta package that points to the backported linux kernel |
| 06:24.42 | stephanie92 | so no worries |
| 06:24.43 | Pwnna | afaict |
| 06:24.59 | stephanie92 | Pwnna: it will auto update, trust |
| 06:25.00 | Pwnna | which means, if a new version of kernel comes out, nothing will update unless the maintainer only updates linux-image-4.6.0-0.bpo.1-amd64 |
| 06:25.09 | Pwnna | how do i verify that? |
| 06:25.25 | stephanie92 | Pwnna: idk, do i look like google? xD |
| 06:25.50 | stephanie92 | Pwnna: But i've had updates pushed out to my back ported kernels O_o |
| 06:25.53 | Pwnna | afaik, from the years i've worked with this stuff, it doesn't autoupdate. |
| 06:26.06 | stephanie92 | If you say so >.> but it does for me |
| 06:26.11 | stephanie92 | maybe it just likes me better ;) |
| 06:26.18 | Pwnna | .. oh |
| 06:26.22 | Pwnna | i missed this somehow |
| 06:26.23 | Pwnna | https://packages.debian.org/jessie-backports/linux-image-amd64 |
| 06:26.38 | Pwnna | facepalms. |
| 06:26.54 | Pwnna | i swear i was looking for that earlier and i couldn't find it |
| 06:26.59 | stephanie92 | Pwnna: lmaooo |
| 06:27.44 | Pwnna | stephanie92: so both of us are correct. if i installed just linux-image-4.6.0... it will not autoupdate.. i was under the impression that linux-image-amd64 didn't exist on backport from like an hour of fiddling earlier |
| 06:28.04 | stephanie92 | Pwnna: Ah, i see :) |
| 06:28.08 | *** join/#debian dreaded (~dreaded@2602:306:cea4:92e0::44) |
| 06:28.36 | Pwnna | i think i was looking in wheezy-backports earlier >_> |
| 06:28.48 | Pwnna | and i saw like 3.16 which looked like jessie's version |
| 06:28.58 | stephanie92 | oh geez |
| 06:29.28 | stephanie92 | brb |
| 06:29.45 | *** join/#debian wobelingers (~wobelinge@p54B1869D.dip0.t-ipconnect.de) |
| 06:29.52 | Pwnna | anyhow thanks. |
| 06:29.57 | Pwnna | i was just dumb :\ |
| 06:32.00 | *** join/#debian Codfection (~Codfectio@unaffiliated/codfection) |
| 06:32.29 | *** join/#debian sm4sh (~smash@ip4-83-240-63-212.cust.nbox.cz) |
| 06:34.24 | *** join/#debian dayten (~gnoid@185.3.32.92) |
| 06:35.30 | poeticrpm | im installing debian from an arch install. I want to make sure that initramfs is generated with the necessary bits to be able to unlock my luks partition. I have aes xts plain 64 encryption via luks on the device. do I need anything else besides 'xts' and 'aes_amd64' in /etc/initramfs-tools/modules? |
| 06:35.48 | *** join/#debian ullisse (~root@188.173.247.170) |
| 06:36.23 | poeticrpm | i cant install debian stable from an install usb/cd since kernels prior to 3.2 have corruption issues on luks when using btrfs, so hence why im installing from arch |
| 06:36.59 | *** join/#debian BalTun (~BalTun@5.149.211.122) |
| 06:37.24 | poeticrpm | and i already know what I need on grub, how /etc/crpyttab and /etc/fstab are to be setup |
| 06:38.11 | poeticrpm | on arch id add 'encrypt' to the modules line in /etc/mkinitcpio.conf, but debian is different. This is the first time installing debian on a luks partition |
| 06:39.38 | *** join/#debian archer121 (0e8bb972@gateway/web/freenode/ip.14.139.185.114) |
| 06:39.42 | archer121 | I am having a wierd issue on this debian server. I am trying to assign it an ip of 192.168.240.9, which is free. But when I restart networking, I see a ipv6 address instead. But it is perfectly fine when I assign another ip (192.168.240.167). Both the IPs are not being used in any another machine. WHat could I be doing wrong? |
| 06:39.44 | archer121 | I am assigning the ip by changing the address in /etc/network/interefaces and then restarting the 'networking' service. |
| 06:39.47 | poeticrpm | if anyone has an idea, ping me with a suggestion. Gonna crash- my client should log it |
| 06:42.29 | *** join/#debian sm4sh (~smash@ip4-83-240-63-212.cust.nbox.cz) |
| 06:42.55 | *** join/#debian klow (~textual@c-98-247-49-57.hsd1.wa.comcast.net) |
| 06:46.12 | *** join/#debian Lowl3v3l (~Lowl3v3l@dslb-094-218-184-123.094.218.pools.vodafone-ip.de) |
| 06:46.18 | *** join/#debian ccsdss (~ray@36.46.208.54) |
| 06:46.23 | *** part/#debian ccsdss (~ray@36.46.208.54) |
| 06:46.48 | *** join/#debian XXOOXX (~dzc@27.153.66.72) |
| 06:47.07 | *** join/#debian bbabich (~bbabich@au2008a-gw0.activeservices.net.au) |
| 06:47.29 | *** join/#debian sm4sh (~smash@ip4-83-240-63-212.cust.nbox.cz) |
| 06:47.40 | *** part/#debian XXOOXX (~dzc@27.153.66.72) |
| 06:49.48 | *** join/#debian smdeep (~smdeep@dynamic-19.103.142.202.sitibroadband.in) |
| 06:51.44 | *** join/#debian Nickle1 (~xu@58.210.62.50) |
| 06:52.19 | *** join/#debian Nickle1 (~xu@58.210.62.50) |
| 06:54.34 | *** join/#debian Nickle1 (~xu@58.210.62.50) |
| 06:56.34 | *** join/#debian xstation (~amma@106.219.29.16) |
| 06:57.03 | xstation | how to start network mananger applet as root? |
| 06:57.19 | *** join/#debian dionysus70 (~Icedove@unaffiliated/dionysus69) |
| 06:57.59 | *** join/#debian cyan__ (~cyan@d152-122.icpnet.pl) |
| 06:59.57 | xstation | cannot edit under manual and save unless network manager is root |
| 07:00.59 | *** join/#debian Nickle1 (~xu@58.210.62.50) |
| 07:01.18 | *** join/#debian dutchfish (~wil@unaffiliated/dutchfish) |
| 07:03.09 | *** join/#debian cdown (~cdown@82.132.184.21) |
| 07:05.03 | *** join/#debian sm4sh (~smash@ip4-83-240-63-212.cust.nbox.cz) |
| 07:06.24 | jaggz | anyone know an x11 clipboard that lets you copy into lettered buffers (kinda like vim)? |
| 07:08.02 | *** join/#debian SilverWhitefish (~hidden@68-200-88-239.res.bhn.net) |
| 07:09.53 | MaBunny | theres a prog for copying terminal outputs/letters to a graphical program |
| 07:10.21 | *** join/#debian woshty (~irc@HSI-KBW-078-043-007-065.hsi4.kabel-badenwuerttemberg.de) |
| 07:10.29 | MaBunny | like echo "ddd...." > IDK |
| 07:10.33 | MaBunny | and paste |
| 07:10.52 | MaBunny | IDK is the programs name...i dont remeber /cant |
| 07:11.05 | *** join/#debian Codfection (~Codfectio@unaffiliated/codfection) |
| 07:11.33 | poeticrpm | xstation, if you cannot edit network-manager unless root, you need to change permissions for something- NOT run the applet as root |
| 07:11.48 | poeticrpm | bb |
| 07:12.15 | *** join/#debian Codfection (~Codfectio@unaffiliated/codfection) |
| 07:12.24 | *** join/#debian BenNZ (~Ben__@118-93-28-232.dsl.dyn.ihug.co.nz) |
| 07:13.17 | MaBunny | use chown or chgrp |
| 07:13.37 | xstation | poeticrpm: i can edit ethernet under manual ipv4 but I cannot save the settings |
| 07:14.01 | xstation | the save button is grayed out |
| 07:15.01 | poeticrpm | xstation, yeah and you should be able to. I havent had this problem with network manager, but I would aim my google searches at network manager and permissions to figure out what chown or chgrp command you need to run to have proper permissions- NOT run network manager itself as root |
| 07:15.09 | *** join/#debian julius_ (~jason4@dslb-092-077-007-115.092.077.pools.vodafone-ip.de) |
| 07:15.18 | *** join/#debian jason3 (~jason4@dslb-092-077-007-115.092.077.pools.vodafone-ip.de) |
| 07:15.26 | poeticrpm | and actually, you should be looking for permissions related stuff on network-manager-applet |
| 07:15.32 | poeticrpm | but anyways |
| 07:15.46 | *** join/#debian sm4sh (~smash@ip4-83-240-63-212.cust.nbox.cz) |
| 07:16.14 | *** join/#debian btf (~btf@185.83.12.159) |
| 07:17.35 | *** join/#debian bobe (~bobe@x4d0a1b8e.dyn.telefonica.de) |
| 07:19.57 | *** join/#debian Internope (4b611588@gateway/web/freenode/ip.75.97.21.136) |
| 07:20.05 | Internope | Hello |
| 07:20.10 | Internope | I am trying to get my pi to connect to the Internet via Ethernet on my PC. I am using Raspbian Jessie. |
| 07:20.46 | *** join/#debian g2000 (~g2000@ipservice-092-210-048-204.092.210.pools.vodafone-ip.de) |
| 07:20.46 | *** join/#debian sm4sh (~smash@ip4-83-240-63-212.cust.nbox.cz) |
| 07:20.53 | up2late | respond to the guy trying to help u in #raspberrypi |
| 07:21.26 | Internope | <PROTECTED> |
| 07:25.09 | xstation | poeticrpm: ok will google see if anything comes up |
| 07:25.27 | *** join/#debian jackbrown (~se@unaffiliated/jackbrown) |
| 07:27.15 | *** join/#debian Agiofws (~agiofws@2a02:582:7cae:5100:f033:970:56fc:a1a7) |
| 07:28.04 | *** join/#debian SlaGTaTs (~bilbo@cpc68385-donc11-2-0-cust226.17-1.cable.virginm.net) |
| 07:29.11 | *** join/#debian sm4sh (~smash@ip4-83-240-63-212.cust.nbox.cz) |
| 07:31.34 | *** join/#debian zlatan (~Zlatan@137.158.22.94) |
| 07:31.45 | *** part/#debian zlatan (~Zlatan@137.158.22.94) |
| 07:33.04 | *** join/#debian japash (d2a29c64@gateway/web/freenode/ip.210.162.156.100) |
| 07:34.52 | *** join/#debian mazert (~mazert@ANice-653-1-415-160.w86-193.abo.wanadoo.fr) |
| 07:36.28 | *** join/#debian sm4sh (~smash@ip4-83-240-63-212.cust.nbox.cz) |
| 07:37.47 | *** join/#debian Loeb (~ok@estatus.olaninfo.com) |
| 07:41.27 | *** join/#debian sm4sh (~smash@ip4-83-240-63-212.cust.nbox.cz) |
| 07:41.34 | *** join/#debian psaifi (~ron@151.26.30.127) |
| 07:46.54 | *** join/#debian eLeEt (admin@cracking.cf) |
| 07:46.59 | *** part/#debian eLeEt (admin@cracking.cf) |
| 07:46.59 | *** join/#debian chuugar (~charles@82.11.128.77.rev.sfr.net) |
| 07:47.34 | stephanie92 | Anyone here have any experience with proxmox? |
| 07:47.53 | *** join/#debian Nickle1 (~xu@58.210.62.50) |
| 07:48.50 | *** join/#debian gmelis (~gmelis@ppp-2-84-11-91.home.otenet.gr) |
| 07:49.18 | *** join/#debian multi_io (~olaf@x55b24ed5.dyn.telefonica.de) |
| 07:49.26 | babilen | dpkg: proxmox |
| 07:49.26 | dpkg | Proxmox Virtual Environment (Proxmox VE) is a GNU/Linux distribution <based on Debian>, providing a virtualization platform with <OpenVZ> and <KVM>. It is not supported in #debian. There's an unofficial ##proxmox channel on Freenode. For official venues, see http://pve.proxmox.com/wiki/Get_support |
| 07:49.33 | babilen | stephanie92: Try their channel ^ |
| 07:49.51 | stephanie92 | >.> I know about their channel ;3 |
| 07:50.10 | *** join/#debian Nickle1 (~xu@58.210.62.50) |
| 07:50.15 | babilen | I would expect people in there to be, at least vaguely, familiar with it |
| 07:50.43 | stephanie92 | babilen: The channel is dead as usual. |
| 07:50.52 | *** join/#debian Nnavd (~Nnavd@d50-92-9-182.bchsia.telus.net) |
| 07:51.54 | *** join/#debian rjsalts (~rjsalts@2001:41d0:8:9272::1) |
| 07:52.12 | *** join/#debian karimb (~karimb@87.pool85-52-16.dynamic.orange.es) |
| 07:52.54 | *** join/#debian Nickle1 (~xu@58.210.62.50) |
| 07:53.26 | *** part/#debian Nickle1 (~xu@58.210.62.50) |
| 07:53.39 | *** join/#debian jackbrown (~se@unaffiliated/jackbrown) |
| 07:54.59 | *** join/#debian lo0m (~Mutter@178.255.168.110) |
| 07:55.27 | *** join/#debian Gi0 (~Gi0@unaffiliated/gi0) |
| 07:56.56 | *** join/#debian serduk (~IceChat78@193.110.113.74) |
| 07:57.49 | jackbrown | anyone an help me with grub ? |
| 07:58.00 | *** mode/#debian [+l 1600] by debhelper |
| 07:59.04 | *** part/#debian lo0m (~Mutter@178.255.168.110) |
| 07:59.18 | babilen | Depends on your problem, I guess |
| 08:05.45 | *** join/#debian Tiffon (~name@unaffiliated/tiff0n) |
| 08:06.04 | *** join/#debian superusr (~usr@p5B2448BD.dip0.t-ipconnect.de) |
| 08:08.22 | *** join/#debian SpaceAce (~SpaceAce@124-170-159-172.dyn.iinet.net.au) |
| 08:08.55 | *** join/#debian ynanm (~quassel@2001:8a0:62fe:2f01:6d97:c524:83a1:a90e) |
| 08:08.55 | *** join/#debian Bonn333 (~Bonn333@unaffiliated/bonn333) |
| 08:09.53 | Bonn333 | Hi |
| 08:12.27 | *** join/#debian sm4sh (~smash@ip4-83-240-63-212.cust.nbox.cz) |
| 08:13.08 | *** join/#debian asterismo (~santiago@179.26.171.147) |
| 08:13.21 | *** join/#debian level7 (~quassel@31.44.17.250) |
| 08:13.26 | *** join/#debian yeticry (~yeticry@60.168.59.171) |
| 08:14.29 | *** join/#debian zytrix (~zytrix@7.4b.01a8.ip4.static.sl-reverse.com) |
| 08:18.25 | *** join/#debian woshty (~irc@HSI-KBW-078-043-006-022.hsi4.kabel-badenwuerttemberg.de) |
| 08:18.59 | *** join/#debian B[]rG (~Borg@46-150-40-173.cable.teleing.net) |
| 08:19.29 | *** join/#debian PseudoNoob (~PseudoNoo@unaffiliated/pseudonoob) |
| 08:20.57 | *** join/#debian blawiz (~DD_comman@unaffiliated/blawiz) |
| 08:22.02 | *** join/#debian ven00m (~ven00m@62-131-113-92.pool.ukrtel.net) |
| 08:22.19 | blawiz | is there a software that is good at analysing security images to determine if there is some actual movement/difference between pics (my camera reacts to changes in light from the sun/clouds) |
| 08:22.20 | *** join/#debian Strife89 (~quassel@adsl-98-67-58-133.mcn.bellsouth.net) |
| 08:22.57 | *** join/#debian jackbrown (~se@unaffiliated/jackbrown) |
| 08:23.26 | *** join/#debian Piratmajor (~Piratmajo@ti0013a400-1814.bb.online.no) |
| 08:25.14 | *** join/#debian Haxxa (~Harrison@120.147.48.206) |
| 08:25.28 | rozie | blawiz: program name is motion, and you are lookin for "motion detection linux" |
| 08:25.48 | rozie | https://www.howtoforge.com/tutorial/motion-detection-on-linux/ |
| 08:26.02 | *** join/#debian AusteritySucks (~Austerity@unaffiliated/austeritysucks) |
| 08:28.22 | *** join/#debian rebrec (~quassel@jau72-3-88-177-195-234.fbx.proxad.net) |
| 08:29.44 | *** join/#debian asterismo (~santiago@179.26.145.128) |
| 08:32.15 | blawiz | ty rozie o/ |
| 08:32.45 | *** join/#debian TyrfingMjolnir (~Tyrfing@62.92.82.250) |
| 08:32.51 | *** join/#debian cuqa (d4e0462b@gateway/web/freenode/ip.212.224.70.43) |
| 08:33.07 | *** join/#debian jim_carry (~jim_carry@unaffiliated/jim-carry/x-1372289) |
| 08:33.33 | cuqa | hello, I have installed Debian 8 with netinstaller and did the network configuration in /etc/network/interfaces but when rebooting there is no default gateway being set |
| 08:33.46 | *** join/#debian jackbrown (~se@unaffiliated/jackbrown) |
| 08:33.48 | *** join/#debian japash (d2a29c64@gateway/web/freenode/ip.210.162.156.100) |
| 08:33.56 | *** join/#debian sm4sh (~smash@ip4-83-240-63-212.cust.nbox.cz) |
| 08:34.46 | *** join/#debian llorephie (~Thunderbi@2001:470:6f:6b7::980) |
| 08:34.49 | blawiz | rozie: but it can be used on images stored on the computer? (my webcam sends them to my by email, from my office) |
| 08:35.04 | blawiz | its a standalone security camera |
| 08:37.35 | *** join/#debian tendavis (~root@flk2-de.quadhost.net) |
| 08:37.40 | babilen | cuqa: Might help if you were to paste your /e/n/i somewhere |
| 08:38.00 | babilen | (not pastebin.com) |
| 08:38.00 | *** mode/#debian [+l 1607] by debhelper |
| 08:38.09 | *** join/#debian BalTun (~BalTun@5.149.211.122) |
| 08:38.18 | *** join/#debian infowizard (~user@124.197.75.1) |
| 08:39.29 | *** join/#debian RebelCoder (~jurisl85@cpc74579-lewi13-2-0-cust201.2-4.cable.virginm.net) |
| 08:40.06 | *** join/#debian reverse_1ight (~reverse_l@ntszok094069.szok.nt.adsl.ppp.infoweb.ne.jp) |
| 08:40.20 | *** join/#debian sm4sh (~smash@ip4-83-240-63-212.cust.nbox.cz) |
| 08:41.52 | *** join/#debian Quatroking (~Quatrokin@5070983A.static.ziggozakelijk.nl) |
| 08:41.54 | *** join/#debian EnergyCoffee (~irc@216.105.40.250) |
| 08:42.02 | *** join/#debian TheCoffeMaker (~TheCoffeM@unaffiliated/thecoffemaker) |
| 08:42.14 | *** part/#debian tendavis (~root@flk2-de.quadhost.net) |
| 08:43.54 | *** join/#debian SilverWhitefish (~hidden@68-200-88-239.res.bhn.net) |
| 08:44.25 | cuqa | babilen: http://pastie.org/private/zu9tbgbyzhvuv6ydxulug |
| 08:44.30 | *** join/#debian jackbrown (~se@unaffiliated/jackbrown) |
| 08:44.39 | *** join/#debian kiao2938 (~mj@dslb-088-066-253-070.088.066.pools.vodafone-ip.de) |
| 08:44.46 | cuqa | the ip configuration does work, only the default route is not being set |
| 08:45.18 | cuqa | I can ping the gateway, but nothing behind .. until I do: route add default gateway 192.168.0.1 dev eth0 |
| 08:45.40 | teraflops | cuqa: mind pasting the output of `ip route show` too? |
| 08:47.47 | *** join/#debian serduk (~IceChat78@193.110.113.74) |
| 08:48.18 | babilen | Anything in /etc/network/interfaces.d ? |
| 08:50.04 | *** join/#debian chalcedny (~chalcedon@unaffiliated/chalcedony) |
| 08:50.18 | *** join/#debian sm4sh (~smash@ip4-83-240-63-212.cust.nbox.cz) |
| 08:50.26 | *** join/#debian wobelingers (~wobelinge@p54B1869D.dip0.t-ipconnect.de) |
| 08:50.36 | *** join/#debian nhhc (~nhhc@AMarseille-654-1-551-248.w92-158.abo.wanadoo.fr) |
| 08:54.08 | *** join/#debian pyface (~pyface@about/security/contributor/pyface) |
| 08:54.59 | *** join/#debian jackbrown (~se@unaffiliated/jackbrown) |
| 08:55.25 | *** join/#debian l3archos (~Icedove@unaffiliated/l3archos) |
| 08:59.24 | *** join/#debian karimb (~karimb@87.pool85-52-16.dynamic.orange.es) |
| 09:00.30 | *** join/#debian buumi (~quassel@163.172.157.22) |
| 09:01.47 | *** join/#debian jmd (~user@de.cellform.com) |
| 09:02.21 | jmd | I've inadvertently overwritten my /etc/fstab How can I recover it? |
| 09:02.50 | *** join/#debian lucdalton (~lucdalton@176.248.230.253) |
| 09:04.26 | *** join/#debian Agiofws (~agiofws@2a02:582:7cae:5100:f033:970:56fc:a1a7) |
| 09:05.30 | *** join/#debian TomTomTosch (~henryk@unaffiliated/tomtomtosch) |
| 09:05.37 | *** join/#debian dr4kk4r^ (~dr4kk4r^@unaffiliated/dr4kk4r/x-7373305) |
| 09:05.52 | *** part/#debian dr4kk4r^ (~dr4kk4r^@unaffiliated/dr4kk4r/x-7373305) |
| 09:06.29 | *** join/#debian edyp87 (~marek@public-gprs386689.centertel.pl) |
| 09:09.02 | hexnewbie | jmd: You have no backup anywhere? |
| 09:09.09 | *** join/#debian zlatan (~Zlatan@137.158.22.94) |
| 09:09.17 | *** part/#debian zlatan (~Zlatan@137.158.22.94) |
| 09:09.39 | *** join/#debian jackbrown (~se@unaffiliated/jackbrown) |
| 09:10.01 | hexnewbie | jmd: If you're familiar with how to create an fstab file, you can pick the lines from /etc/mtab (or /proc/mounts) that seem relevant, fix them, and use them as fstab. |
| 09:12.04 | *** join/#debian bertbob (~bertbob@reriding.dsl.xmission.com) |
| 09:13.03 | *** join/#debian zeemz (~zeemz@201.102.105.251) |
| 09:13.09 | *** join/#debian cdown (~cdown@82.132.184.21) |
| 09:13.33 | *** join/#debian Haxxa (~Harrison@120.147.48.206) |
| 09:13.42 | *** join/#debian Wizek (~Wizek@94-21-229-143.pool.digikabel.hu) |
| 09:15.00 | *** join/#debian brokencycle (~brokencyc@36.110.119.54) |
| 09:18.17 | jmd | hexnewbie: ok I'll try to gleem the info from /etc/mtab |
| 09:18.19 | jmd | Thanks |
| 09:19.31 | *** join/#debian Strife89 (~quassel@adsl-98-67-58-133.mcn.bellsouth.net) |
| 09:19.50 | *** join/#debian SpaceAce (~SpaceAce@124-170-159-172.dyn.iinet.net.au) |
| 09:20.07 | *** join/#debian buumi_ (~buumi@163.172.157.22) |
| 09:20.28 | *** join/#debian sm4sh (~smash@ip4-83-240-63-212.cust.nbox.cz) |
| 09:21.01 | *** join/#debian arcvile_ (~quassel@108-245-107-91.lightspeed.sbndin.sbcglobal.net) |
| 09:23.34 | *** join/#debian wabuh (~wabuh@host-149-154-197-230.dynamic.voo.be) |
| 09:24.15 | *** join/#debian jason3 (~jason4@dslb-092-077-007-115.092.077.pools.vodafone-ip.de) |
| 09:24.25 | *** join/#debian julius_ (~jason4@dslb-092-077-007-115.092.077.pools.vodafone-ip.de) |
| 09:25.25 | *** join/#debian sm4sh (~smash@ip4-83-240-63-212.cust.nbox.cz) |
| 09:25.44 | *** join/#debian lucdalton (~lucdalton@2a02:c7d:b7d9:5c00:603b:a2e6:11c1:5191) |
| 09:25.59 | *** join/#debian jazz (~jazz@2a03:7220:8081:da02:5e51:4fff:fecc:5254) |
| 09:26.04 | *** join/#debian lucdalto_ (~lucdalton@2a02:c7d:b7d9:5c00:408e:fdb1:b062:1dda) |
| 09:27.35 | *** join/#debian alxy (uid115853@gateway/web/irccloud.com/x-inhbxzgchwdbokqj) |
| 09:28.00 | *** mode/#debian [+l 1616] by debhelper |
| 09:28.20 | *** join/#debian donoban (~user@199.58.81.144) |
| 09:28.36 | *** join/#debian tallbarr (~none@unaffiliated/tallbarr) |
| 09:30.29 | *** join/#debian sm4sh (~smash@ip4-83-240-63-212.cust.nbox.cz) |
| 09:32.05 | *** join/#debian buruma (~unknown@37.220.13.53) |
| 09:32.15 | *** join/#debian Ad1_RN (~Ad1_RnR@88-199-45-84.matcom.com.pl) |
| 09:32.26 | *** join/#debian timahvo1 (~rogue@197.237.131.64) |
| 09:32.27 | *** join/#debian we6jbo2 (~we6jbo2@cpe-75-80-39-152.san.res.rr.com) |
| 09:33.02 | *** join/#debian ToBeCloud (uid51591@wikimedia/ToBeFree) |
| 09:33.38 | buruma | I'm trying to disable wakeup by usb, by editing /proc/acpi/wakeup. But each time I save the file, it immediately gets reverted to the file before editing it. Does anyone know how to fix this? |
| 09:34.03 | *** join/#debian thebrush (~Icedove@host170-55-static.2-79-b.business.telecomitalia.it) |
| 09:34.31 | *** join/#debian Codfection (~Codfectio@unaffiliated/codfection) |
| 09:37.47 | *** join/#debian Nyctophilia (~IamHereFo@unaffiliated/nyctophilia) |
| 09:37.54 | *** join/#debian blind (~blind@unaffiliated/blind) |
| 09:38.06 | *** join/#debian catsup (d@ps38852.dreamhost.com) |
| 09:38.06 | *** join/#debian aau (~aau@5.141.219.182) |
| 09:38.08 | *** join/#debian arcvile___ (~quassel@108-245-107-91.lightspeed.sbndin.sbcglobal.net) |
| 09:41.15 | *** join/#debian kunaaljain______ (~kunaaljai@122.167.124.238) |
| 09:41.43 | jmd | In which /var/log/* file should remote mount requests be logged? |
| 09:42.18 | *** join/#debian sm4sh (~smash@ip4-83-240-63-212.cust.nbox.cz) |
| 09:42.31 | *** join/#debian kiao2938 (~mj@p578E13D0.dip0.t-ipconnect.de) |
| 09:43.09 | *** join/#debian antgel (~topdog@77.124.118.170) |
| 09:44.26 | hexnewbie | buruma: How are you editing /proc/acpi/wakeup? |
| 09:44.54 | buruma | hexnewbie: sudo emacs |
| 09:45.39 | *** join/#debian winb (~pi@c2FA4BF51.dhcp.as2116.net) |
| 09:46.12 | hexnewbie | buruma: /proc/acpi/wakeup is not a normal file (even though stat() says it's a regular one). Editing it with a text editor should fail with EINVAL, most likely. |
| 09:47.42 | buruma | hexnewbie: is it possible to edit it by another method? |
| 09:48.07 | *** join/#debian catsup (d@ps38852.dreamhost.com) |
| 09:48.59 | hexnewbie | buruma: You can't edit it, but you can write things to it, with echo for example. But I am not familiar with the syntax. I know "echo DEVICE > /proc/acpi/wakeup" switches DEVICE to enabled status, but I don't know how to disable it. |
| 09:50.02 | hexnewbie | Perhaps "echo -DEVICE > ...", because other proc files operate that way, but I don't actually know if that's correct |
| 09:50.43 | *** join/#debian f10_ (~flo@2001:470:52af:1:7154:9677:ab5c:79d3) |
| 09:50.44 | *** join/#debian wobelingers (~wobelinge@p54B1869D.dip0.t-ipconnect.de) |
| 09:51.06 | *** join/#debian nikoma (~nikoma@95.82.135.130) |
| 09:51.08 | hexnewbie | buruma: Better find the device's "wakeup" file in /sys, and run "echo disabled > /sys/...device.../power/wakeup" |
| 09:51.16 | *** join/#debian tallbarr (~none@unaffiliated/tallbarr) |
| 09:51.34 | *** join/#debian lesta (~user@unaffiliated/jimlesta) |
| 09:52.10 | *** join/#debian ArchNoob (~ArchNoob@unaffiliated/archnoob) |
| 09:54.26 | buruma | hexnewbie: thanks, I'll try that |
| 09:55.22 | *** join/#debian Knaldgas (~pdj@85.204.137.153.ip4.gigabit.dk) |
| 09:56.30 | *** join/#debian davi (~davi@gnu/davi) |
| 09:56.43 | *** join/#debian infowizard (~user@124.197.75.1) |
| 09:58.01 | *** mode/#debian [+l 1627] by debhelper |
| 09:58.48 | *** join/#debian yeticry (~yeticry@60.168.59.171) |
| 10:01.43 | *** join/#debian mayhew (~mayhew@hlfxns016cw-142068187229.dhcp-dynamic.FibreOp.ns.bellaliant.net) |
| 10:02.51 | *** join/#debian sm4sh (~smash@ip4-83-240-63-212.cust.nbox.cz) |
| 10:06.13 | *** join/#debian eSa| (~esa@host175-170-dynamic.50-82-r.retail.telecomitalia.it) |
| 10:06.39 | *** join/#debian Rephlexie (~Rephlexie@c-73-211-82-29.hsd1.il.comcast.net) |
| 10:08.06 | *** join/#debian timahvo1 (~rogue@197.237.131.64) |
| 10:08.26 | *** join/#debian sm4sh (~smash@ip4-83-240-63-212.cust.nbox.cz) |
| 10:09.07 | *** join/#debian level7_ (~quassel@31.44.17.250) |
| 10:09.08 | *** join/#debian Uf0 (~luna@078f-0000-0000-0000-cd00-4200-07d0-2001.sta.estpak.ee) |
| 10:09.18 | *** join/#debian navlys (~smuxi@87-231-23-206.rev.numericable.fr) |
| 10:10.12 | *** join/#debian woshty (~irc@HSI-KBW-078-043-006-022.hsi4.kabel-badenwuerttemberg.de) |
| 10:10.39 | *** join/#debian cdown_ (~cdown@82.132.184.21) |
| 10:10.40 | *** join/#debian aau (~aau@5.141.219.182) |
| 10:10.50 | *** join/#debian Korolev (~Korolev@2601:586:c403:a570:81c1:15e2:86f3:7d28) |
| 10:11.37 | *** join/#debian aau (~aau@5.141.219.182) |
| 10:14.32 | *** join/#debian dselect (~dselect@unaffiliated/themill/bot/dselect) |
| 10:15.15 | *** join/#debian towo` (~towo@unaffiliated/towo/x-4064351) |
| 10:15.20 | *** join/#debian LNJ2GO (~lnj@x55b2cec1.dyn.telefonica.de) |
| 10:15.32 | *** join/#debian juantelez (~juantelez@unaffiliated/juantelez) |
| 10:18.20 | *** join/#debian LNJ2GO (~lnj@x55b2cec1.dyn.telefonica.de) |
| 10:22.17 | *** part/#debian BoBeR182 (~BoBeR182@unaffiliated/bober182) |
| 10:22.27 | *** join/#debian CHCl3 (~CHCl3@95.61.147.160) |
| 10:26.53 | *** join/#debian CapsAdmin (~CapsAdmin@ti0115a400-1989.bb.online.no) |
| 10:29.48 | *** join/#debian xSmurf (MrSmurf@gateway/vpn/mullvad/x-wumamgeijghwkade) |
| 10:30.45 | *** join/#debian root (~root@200.106.89.98) |
| 10:30.48 | *** join/#debian TheRealGitGud (~GitGud@unaffiliated/gitgud) |
| 10:31.58 | *** join/#debian StathisA (~StathisA@unaffiliated/stathisa) |
| 10:31.59 | *** join/#debian AvatarA (~avatara@unaffiliated/avatara) |
| 10:32.59 | *** join/#debian sm4sh (~smash@ip4-83-240-63-212.cust.nbox.cz) |
| 10:33.00 | *** join/#debian The_Witcher (~Witcher_R@103.240.96.137) |
| 10:33.07 | marlinc | I'm trying to package a Fedora project for Debian but I'm stuck with a PAM service file. I'm not sure how to get it to work on Debian. |
| 10:34.38 | *** join/#debian Gnomethrower (~B@unaffiliated/gnomethrower) |
| 10:35.32 | *** join/#debian GJ_ (~Thunderbi@88.159.120.241) |
| 10:38.30 | *** join/#debian jim_carry (~jim_carry@unaffiliated/jim-carry/x-1372289) |
| 10:39.54 | *** join/#debian Komputer- (~KomputerK@komputerkid.net) |
| 10:40.17 | *** join/#debian sm4sh (~smash@ip4-83-240-63-212.cust.nbox.cz) |
| 10:42.31 | jelly | marlinc: if you plan to upload to debian, ask in #debian-mentors over on irc.oftc.net |
| 10:44.26 | *** join/#debian Dinux (~Yorick@2a02:a212:8600:2700:2586:803d:540a:b925) |
| 10:48.54 | marlinc | Thank you jelly |
| 10:49.23 | marlinc | Will do |
| 10:50.22 | *** join/#debian sm4sh (~smash@ip4-83-240-63-212.cust.nbox.cz) |
| 10:53.07 | *** join/#debian SCHAAP137 (~dorian@unaffiliated/schaap137) |
| 10:54.55 | *** join/#debian afx237 (~afx237@107.170.10.178) |
| 10:58.01 | *** mode/#debian [+l 1618] by debhelper |
| 10:58.13 | *** join/#debian thebrush (~Icedove@host170-55-static.2-79-b.business.telecomitalia.it) |
| 10:59.42 | flog | Hi, i've got som issues with apt-get after adding repos for spotify. seems like spotify prohibits me from installing other software via apt. |
| 11:00.51 | *** join/#debian lucdalton (~lucdalton@90.193.46.218) |
| 11:01.25 | *** join/#debian BalTun (~BalTun@5.149.211.122) |
| 11:01.29 | *** join/#debian aaro (~aaro@unaffiliated/xyox/x-040147) |
| 11:01.54 | *** join/#debian Makaveli7 (~Makaveli7@46.197.149.93) |
| 11:02.11 | *** join/#debian amcorreia (~amcorreia@2804:7f5:280:329f::2) |
| 11:02.37 | *** join/#debian RebelCoder (~jurisl85@cpc74579-lewi13-2-0-cust201.2-4.cable.virginm.net) |
| 11:04.54 | flog | http://pastie.org/private/byv0c2pdgfnxhyzlheaj1w |
| 11:05.19 | *** join/#debian marvn (~marvn@46.33.broadband3.iol.cz) |
| 11:05.46 | *** join/#debian dpkg (~dpkg@unaffiliated/dpkg) |
| 11:05.47 | flog | any ideas? |
| 11:06.51 | *** join/#debian Butt3rfly (~sona@173.104.112.87.dyn.plus.net) |
| 11:07.51 | *** join/#debian Guest97326 (~sona@trivialand/genius/butt3rfly) |
| 11:09.08 | *** join/#debian cuechan (~paul@x55b08813.dyn.telefonica.de) |
| 11:09.48 | *** join/#debian Anonymes (uid168604@gateway/web/irccloud.com/x-szpycbznbowdfasg) |
| 11:11.35 | RebelCoder | flog, I remember coming across the article about Spotify on Debian.. |
| 11:12.00 | *** join/#debian ArchNoob (~ArchNoob@unaffiliated/archnoob) |
| 11:12.15 | RebelCoder | flog, s now known as Guest97326 |
| 11:12.26 | RebelCoder | upss.. |
| 11:12.26 | RebelCoder | https://goo.gl/439GRC |
| 11:12.28 | RebelCoder | This ? |
| 11:12.47 | flog | Ive seen that article too. |
| 11:13.21 | flog | The problem is that i cant remove spotify either. |
| 11:13.39 | RebelCoder | That is what you get when you install non-free software |
| 11:13.40 | RebelCoder | =) |
| 11:14.03 | flog | doh... |
| 11:14.36 | RebelCoder | have you tried - sudo apt-get --purge remove spotify* |
| 11:14.37 | RebelCoder | & |
| 11:14.39 | RebelCoder | ? |
| 11:14.45 | *** join/#debian brammator (~brammator@109.111.31.14) |
| 11:14.51 | *** join/#debian bertbob (~bertbob@reriding.dsl.xmission.com) |
| 11:15.09 | *** join/#debian b (~glen@unaffiliated/ridout) |
| 11:15.15 | flog | same as results as previous posted pastie |
| 11:15.16 | flog | :( |
| 11:16.08 | RebelCoder | So you are just trying to remove it |
| 11:16.09 | RebelCoder | right ? |
| 11:16.11 | flog | yeah |
| 11:16.14 | *** join/#debian rimdeker (~rimdeker@unaffiliated/rimdeker) |
| 11:16.52 | flog | since i cant install anything else... |
| 11:16.59 | flog | http://pastie.org/private/npurhjrn66udot7vq5whbq |
| 11:17.30 | RebelCoder | ok, this seems to be Language problem then... |
| 11:17.42 | RebelCoder | Did you set your language other then ENG ? |
| 11:18.21 | flog | Probably did, dont really remember to be honest. Im swedish but like my os in english. Like to be able to typ åäö though. |
| 11:18.36 | RebelCoder | This is a different thing... |
| 11:18.43 | RebelCoder | system is confused... |
| 11:18.48 | RebelCoder | let's try fixing it... |
| 11:19.07 | RebelCoder | can you try: |
| 11:19.11 | flog | Thanks! Havent been using linux for about 10 years. Cant remember everything... |
| 11:19.14 | RebelCoder | sudo locale-gen |
| 11:19.30 | flog | gen complete |
| 11:19.31 | RebelCoder | so it should re-generate languages |
| 11:19.38 | RebelCoder | try uninstall or install again ? |
| 11:20.36 | *** join/#debian Brigo (~Brigo@164.11.60.178.dynamic.reverse-mundo-r.com) |
| 11:20.41 | RebelCoder | Result ? |
| 11:20.50 | *** join/#debian Strife89 (~quassel@adsl-98-80-192-238.mcn.bellsouth.net) |
| 11:20.51 | flog | seems like i actually got vsftpd installed earlier but I got confused by the spotify-client error that i got. |
| 11:21.07 | RebelCoder | so install works and no Language error ? |
| 11:21.09 | RebelCoder | Correct ? |
| 11:21.20 | flog | still getting language errors |
| 11:21.25 | flog | let me paste |
| 11:21.51 | *** join/#debian Butt3rfl1 (~sona@31.185.233.218) |
| 11:21.52 | flog | http://pastie.org/10902652 |
| 11:22.08 | jelly | those perl locale warnings may not be the cause of removal failure. |
| 11:22.26 | RebelCoder | maybe... |
| 11:22.47 | *** join/#debian Butt3rfl1 (~sona@trivialand/genius/butt3rfly) |
| 11:23.02 | RebelCoder | Try correcting Lang errors: |
| 11:23.07 | RebelCoder | sudo apt-get install locales-all |
| 11:23.10 | jelly | !locales |
| 11:23.10 | dpkg | Use 'dpkg-reconfigure locales' to get it up and running. This generates <locale> definitions and also edits /etc/default/locale which sets the $LANG environment variable at login time. Use "LANG=C command" to change the output language for a one off command, ask me about <localised errors>. See also <mac locales>. http://wiki.debian.org/Locale |
| 11:23.16 | RebelCoder | apt-get install locales --reinstall |
| 11:23.20 | *** join/#debian bluenemo (~bluenemo@unaffiliated/bluenemo) |
| 11:23.27 | RebelCoder | sudo dpkg-reconfigure locales |
| 11:23.30 | jelly | there's no need to reinstall the locales package. |
| 11:23.32 | RebelCoder | all 3 comands with sudo |
| 11:23.54 | jelly | there's no need to install locales-all, either, but it's a viable alternative. |
| 11:24.45 | RebelCoder | flog, after all 3 commands, try Spotify again and let us see the output |
| 11:24.59 | *** join/#debian Strife89|Quassel (~quassel@adsl-98-80-181-210.mcn.bellsouth.net) |
| 11:25.04 | flog | no language errors anymore |
| 11:25.08 | RebelCoder | Cool. |
| 11:25.16 | RebelCoder | So Spotify output will be cleaner |
| 11:25.29 | flog | though uninstalling spotify-client still fails. But that's probably not related then. |
| 11:26.17 | RebelCoder | paste new output |
| 11:26.30 | *** join/#debian fennesz (~fennesz@adsl-75.37.6.247.tellas.gr) |
| 11:26.41 | flog | http://pastie.org/private/hkypuxujf1ldlgpxrnpzmg |
| 11:26.42 | *** join/#debian sona (~sona@230.93.99.195.dyn.plus.net) |
| 11:26.42 | *** join/#debian sona (~sona@trivialand/genius/butt3rfly) |
| 11:26.53 | jelly | RebelCoder: if locales-all is installed, there's no reason to reinstall or dpkg-reconfigure "locales", because locales-all provides precompiled files for all the locales (hence the name) |
| 11:27.26 | *** join/#debian careta (~botto@129.82.54.77.rev.vodafone.pt) |
| 11:28.00 | *** mode/#debian [+l 1627] by debhelper |
| 11:28.14 | RebelCoder | Strange. Never seen this kind of error |
| 11:28.15 | RebelCoder | .... |
| 11:28.19 | flog | While where still at it with apt-get stuff, getting this when apt-get update: W: GPG error: http://download.opensuse.org Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 2CE2AC08D880C8E4 |
| 11:28.25 | *** join/#debian Darcidride (~Darcidrid@158.69.114.146) |
| 11:28.42 | RebelCoder | That is OK as you did not add the PGP Key... |
| 11:28.45 | RebelCoder | just a warning... |
| 11:28.53 | RebelCoder | *GPG Key |
| 11:28.55 | *** join/#debian LarArT (~LarArT@unaffiliated/larart) |
| 11:28.57 | Rephlexie | can you install stuff? |
| 11:29.17 | flog | I can install stuff. I was tricked by the spotify-client errors. |
| 11:29.28 | Rephlexie | trying apt-get install xdg-utils |
| 11:29.29 | flog | I get that with everything i install. |
| 11:29.36 | Rephlexie | ahh |
| 11:29.40 | *** join/#debian smica (~smica@host-87-242-15-132.prtelecom.hu) |
| 11:30.09 | flog | Rephlexie: that fixed the spotify warnings. |
| 11:30.27 | Rephlexie | nice, should be able to uninstall it now i think |
| 11:31.06 | flog | I actually want to have spotify installed. But the whole thing with the spotify errors caused me to thing i needed to get rid of it. |
| 11:31.15 | *** join/#debian Qann (~Nomad@hades.golgeli.net) |
| 11:31.44 | RebelCoder | flog, |
| 11:31.52 | flog | yeah? |
| 11:32.08 | RebelCoder | that GPG error is due you adding some software and NOT adding GPG key for it... |
| 11:32.15 | RebelCoder | See Second Step: https://linuxconfig.org/installation-of-spotify-client-on-debian-linux-8-jessie-64-bit |
| 11:32.36 | RebelCoder | See how GPG is added to make sure software is original, not modified . |
| 11:33.00 | RebelCoder | This is for Spotify for example... |
| 11:33.00 | flog | I did add the key listed on spotifys official linux installation page. |
| 11:33.12 | *** join/#debian Lokke (~Thunderbi@ip5f5ad235.dynamic.kabel-deutschland.de) |
| 11:34.56 | *** join/#debian TsukiRa (~tsukira@79-170-251-152.cust.avonet.cz) |
| 11:35.25 | RebelCoder | can you try installing Spotify and force all packages again..... |
| 11:35.29 | *** join/#debian Yukiteru (~Yukiteru@unaffiliated/yukiteru) |
| 11:35.57 | RebelCoder | sudo aptitude -f install spotyfy* |
| 11:36.22 | RebelCoder | See if you can get it REInstalled with force (-f)... |
| 11:36.24 | *** join/#debian SpaceAce (~SpaceAce@124-150-92-152.dyn.iinet.net.au) |
| 11:36.33 | RebelCoder | Any errors ? |
| 11:36.35 | flog | No packages will be installed, upgraded, or removed. |
| 11:37.05 | flog | Guess that means it's properly installed now. |
| 11:37.18 | *** join/#debian nolie (~nolie@cac94-8-82-245-27-76.fbx.proxad.net) |
| 11:37.32 | RebelCoder | BTW, does it work ? |
| 11:38.20 | RebelCoder | sudo aptitude autoclean |
| 11:38.27 | RebelCoder | sudo aptitude purge spotify |
| 11:38.38 | flog | just a second |
| 11:41.10 | *** join/#debian Butt3rfly (~sona@83.216.135.239) |
| 11:42.44 | *** join/#debian LNJ2GO (~lnj@x55b2cec1.dyn.telefonica.de) |
| 11:43.06 | *** join/#debian tokage (308213@unaffiliated/tokage) |
| 11:44.56 | *** join/#debian Envil (~envil@x4db3bcc5.dyn.telefonica.de) |
| 11:46.13 | *** join/#debian Butt3rfl1 (~sona@30.217.113.87.dyn.plus.net) |
| 11:46.22 | *** join/#debian robotroll (~robotroll@unaffiliated/robotroll) |
| 11:47.45 | *** join/#debian mekeor (~quassel@HSI-KBW-046-005-253-095.hsi8.kabel-badenwuerttemberg.de) |
| 11:49.02 | *** join/#debian bumpy (~bouncing@cpc1-cmbg18-2-0-cust192.5-4.cable.virginm.net) |
| 11:49.03 | *** join/#debian xrlabs (uid168270@gateway/web/irccloud.com/x-pefftpxwiidulrsd) |
| 11:49.28 | *** join/#debian Butt3rfl1 (~sona@trivialand/genius/butt3rfly) |
| 11:50.02 | *** join/#debian jaggz (~jaggz@unaffiliated/jaggz) |
| 11:52.20 | *** join/#debian tokage (308213@unaffiliated/tokage) |
| 11:53.28 | *** join/#debian cruncher (~cruncher@unaffiliated/cruncher) |
| 11:53.44 | *** join/#debian ToBeCloud (uid51591@wikimedia/ToBeFree) |
| 11:54.12 | *** join/#debian towo` (~towo@unaffiliated/towo/x-4064351) |
| 11:55.46 | *** join/#debian jim_carry (~jim_carry@unaffiliated/jim-carry/x-1372289) |
| 11:55.55 | *** join/#debian P6hjakonn (~Tinker@f60c-7a28-2ffc-6c40-2d80-8a2c-07d0-2001.dyn.estpak.ee) |
| 11:58.21 | *** join/#debian dvs (~Robert@cwv.teksavvy.com) |
| 11:59.27 | flog | RebelCoder: getting spotify to run on my headless box will unfortunately have to wait. But thanks a lot for helping me with the apt errors. |
| 12:00.26 | RebelCoder | Cool |
| 12:00.31 | *** join/#debian JPT (~jpt@classified.name) |
| 12:01.18 | flog | I was actually about to set up vsftpd when i encountered the spotify stuff. So Im back on doing that. |
| 12:02.22 | *** join/#debian kunaaljain______ (~kunaaljai@122.167.124.238) |
| 12:02.37 | *** join/#debian Sucimini (~androirc@2804:7f1:c180:a5e1:ac06:1f25:ebc4:9e41) |
| 12:05.18 | *** join/#debian FnorZ (~FnorZ@unaffiliated/fnorz) |
| 12:05.26 | *** join/#debian roptat (~roptat@2083.rez-gif.supelec.fr) |
| 12:06.03 | *** join/#debian raidi22 (~raiding@89.15.236.251) |
| 12:06.41 | *** join/#debian MoonkYang (~moonkyang@de.bbido.com.yang.red) |
| 12:06.44 | *** join/#debian interki (~arch_@CPE-101-183-213-128.lnse6.woo.bigpond.net.au) |
| 12:08.00 | *** mode/#debian [+l 1633] by debhelper |
| 12:09.25 | *** join/#debian Discovery (~Discovery@178.239.49.67) |
| 12:09.37 | *** join/#debian zlatan (~Zlatan@137.158.22.94) |
| 12:09.45 | *** part/#debian zlatan (~Zlatan@137.158.22.94) |
| 12:10.47 | teraflops | flog: setting up spotify in headless box? wasn't mopidy-spotify the way to go? |
| 12:11.14 | flog | teraflops: that would probably be a better idea. |
| 12:11.20 | flog | didnt know about that. |
| 12:12.21 | *** join/#debian IlNominePatre (~Discovery@178.239.49.67) |
| 12:13.38 | *** join/#debian aax (~xaa@11.51-65-87.adsl-dyn.isp.belgacom.be) |
| 12:14.30 | teraflops | flog: tbh if you pay for it I prefer google play music over spotify, it also has better _headless_ support (mpd + gmusicproxy) and a better catalog |
| 12:15.14 | flog | teraflops: i've been a spotify-premium user for years. Due to work I need the offline mode using spotify. |
| 12:16.06 | teraflops | idk if mopidy-spotify supports offline mode |
| 12:16.23 | flog | i dont need the offline mode on this machine. |
| 12:16.38 | flog | but the offline mode is one reason why i use spotify. |
| 12:16.43 | teraflops | then google play supports offline mode too e.g smartphone |
| 12:17.18 | flog | I also like the play on remote client feature. |
| 12:17.31 | teraflops | flog: just saying I said it because i've premium user on both platforms and I already pay for google play music |
| 12:18.34 | teraflops | flog: if you do mpd you can stream whenever you want, either from mpd itself or just via wireless play from a smartphone |
| 12:19.14 | *** join/#debian lesik (~lesik@p200300514D111F015EC5D4FFFEBBE8FB.dip0.t-ipconnect.de) |
| 12:19.18 | teraflops | I'm just sharing my thoughts since I tested both platforms |
| 12:20.04 | flog | I see. Didnt mean to start a flameware on music services ^^ |
| 12:20.09 | flog | *flame war |
| 12:20.26 | teraflops | neither me :P |
| 12:20.52 | teraflops | use whatever suits you best is what I think |
| 12:20.56 | flog | Anyway the intel nuc is a cute little machine. |
| 12:21.02 | teraflops | indeed |
| 12:21.19 | *** join/#debian treehug88 (~textual@cpe-68-173-227-135.nyc.res.rr.com) |
| 12:21.39 | *** join/#debian Velveeta_Chef (~Nope@24-151-37-213.dhcp.nwtn.ct.charter.com) |
| 12:21.39 | *** join/#debian Velveeta_Chef (~Nope@fsf/member/Velveeta-Chef) |
| 12:21.48 | flog | Dont know why i did set it up as a headless machine. THought it would be a cleaner install. Atm im using it as a teamspeak server, but planning to stream music to it since it sits in my stereo bench. |
| 12:23.32 | flog | Oh god its nice to be back on a decent internet connection. Going from 1Mbit shared satlink to 250/100Mbit at home gives me tunnel vision |
| 12:23.40 | *** join/#debian wobelingers (~wobelinge@p54B1869D.dip0.t-ipconnect.de) |
| 12:24.13 | *** join/#debian brokency1le (~brokencyc@60.247.127.214) |
| 12:25.03 | *** join/#debian julius_ (~jason4@dslb-092-077-007-115.092.077.pools.vodafone-ip.de) |
| 12:25.09 | *** join/#debian jason3 (~jason4@dslb-092-077-007-115.092.077.pools.vodafone-ip.de) |
| 12:25.12 | teraflops | flog: I do google play music this way https://ptpb.pw/Ah9k.webm |
| 12:25.36 | flog | You got some good music taste ^^ |
| 12:25.55 | teraflops | heh |
| 12:26.23 | *** join/#debian czesmir (~stefan@afo177.neoplus.adsl.tpnet.pl) |
| 12:26.26 | flog | I used mpd back in the days when I tried to be a linux geek. running gentoo, tiling VMs and stuff. |
| 12:28.01 | *** mode/#debian [+l 1639] by debhelper |
| 12:29.58 | teraflops | flog: I got fiber recently I passed from 20/2 to 300/300 :P |
| 12:30.15 | *** join/#debian wonderworld (~ww@ip-176-198-123-154.hsi05.unitymediagroup.de) |
| 12:30.23 | teraflops | for almost the same price ^ |
| 12:30.26 | polyzen | wat |
| 12:30.37 | teraflops | that ^ |
| 12:30.40 | flog | Got a deal with the appartmentcomplex 6euro/month for 250/100 + basic tv package |
| 12:30.51 | teraflops | flog: looks pretty decent |
| 12:30.57 | polyzen | I pay $50/mo for 50/50 :| |
| 12:31.23 | flog | teraflops: 100/100 + tv would have been 0<insert currency here>/month |
| 12:31.28 | teraflops | polyzen: I pay 67⬠tax included for 300/300 and mobile |
| 12:31.38 | polyzen | :| |
| 12:31.53 | flog | about 6 euro for the 250 downstream addon. |
| 12:31.57 | teraflops | oh |
| 12:32.28 | *** join/#debian jak2000 (~jak2000@189.244.142.161) |
| 12:32.51 | teraflops | here is unmetered (by now) |
| 12:32.51 | flog | 1000/100 would have been 900sek or 95euro /month. |
| 12:32.58 | flog | not worth it. |
| 12:33.04 | teraflops | nope ^ |
| 12:33.37 | abrotman | looks around .. |
| 12:33.39 | flog | No limit on data amount either. |
| 12:34.15 | teraflops | from 100 upload speed you can consider running some servers at home |
| 12:34.21 | markybob | enjoys being looked at |
| 12:34.34 | *** join/#debian AirPlanes (~ShortBob@bzq-79-183-44-63.red.bezeqint.net) |
| 12:34.54 | flog | Ive seen as low as 600sek/month for 1000/100 here in sweden. |
| 12:35.11 | teraflops | noticed the warns and returns to the idling |
| 12:35.35 | teraflops | flog: we are about to being warned about offtopic :P |
| 12:35.50 | flog | should probably head back to configuring mopidy then... |
| 12:35.54 | teraflops | heh |
| 12:36.57 | *** join/#debian brokency1le (~brokencyc@60.247.127.214) |
| 12:41.44 | *** join/#debian ]3n19m4[ (~]3n19m4@155.170.117.91.dynamic.reverse-mundo-r.com) |
| 12:41.55 | *** join/#debian lucdalton (~lucdalton@2a02:c7d:b7d9:5c00:408e:fdb1:b062:1dda) |
| 12:44.19 | *** join/#debian B[]rG (~Borg@46-150-40-173.cable.teleing.net) |
| 12:45.29 | *** join/#debian Gregor3000 (~quassel@BSN-77-54-206.static.siol.net) |
| 12:47.02 | *** join/#debian Lokke (~Thunderbi@ip5f5ad235.dynamic.kabel-deutschland.de) |
| 12:47.58 | *** join/#debian z0ran (~z0ran@77.105.40.98) |
| 12:50.13 | *** join/#debian acidfu_ (~acidfoo@208.114.164.73) |
| 12:51.55 | *** join/#debian nog3_ (~tud3@arsenigladkov.plus.com) |
| 12:52.43 | *** part/#debian Gregor3000 (~quassel@BSN-77-54-206.static.siol.net) |
| 12:53.13 | *** join/#debian Uaoi5 (~Uaoi5@cac94-8-82-245-27-76.fbx.proxad.net) |
| 12:53.31 | *** join/#debian ArchNoob (~ArchNoob@unaffiliated/archnoob) |
| 12:54.08 | plasmoduck | fun police |
| 12:59.00 | *** join/#debian lucdalton (~lucdalton@83.217.96.156) |
| 12:59.28 | *** join/#debian netzfisch (~Thunderbi@x55b0609b.dyn.telefonica.de) |
| 13:01.28 | *** join/#debian dmr (~dmr@fsf/member/dmr) |
| 13:04.11 | *** join/#debian davi (~davi@198.199.92.152) |
| 13:04.12 | *** join/#debian davi (~davi@gnu/davi) |
| 13:04.29 | *** join/#debian wobelingers (~wobelinge@p54B1869D.dip0.t-ipconnect.de) |
| 13:07.47 | plasmoduck | lol\ |
| 13:07.57 | plasmoduck | sorry wrong window |
| 13:08.04 | *** join/#debian dethos (~dethos@84.23.213.204) |
| 13:09.39 | *** join/#debian binezap (~binezap@S0106602ad07e96a2.vc.shawcable.net) |
| 13:12.10 | *** join/#debian micronn (~micronn@2a03:b0c0:3:d0::3c:d001) |
| 13:12.34 | *** join/#debian Sdr24 (~Sdr24@c-71-62-227-221.hsd1.va.comcast.net) |
| 13:17.56 | *** join/#debian dArK_IcE (~DARKICEPT@a95-92-107-215.cpe.netcabo.pt) |
| 13:18.36 | *** join/#debian root-x (~root-x@unaffiliated/root-x) |
| 13:20.35 | *** join/#debian aaro (~aaro@unaffiliated/xyox/x-040147) |
| 13:23.23 | *** join/#debian v01t (~v01t@p4FE445A5.dip0.t-ipconnect.de) |
| 13:24.25 | *** join/#debian kiao2938 (~mj@dslb-088-066-253-070.088.066.pools.vodafone-ip.de) |
| 13:25.25 | *** join/#debian AgentClank (AgentClank@unaffiliated/agentclank) |
| 13:25.27 | *** join/#debian nixhed (~nixhed@108-66-245-63.lightspeed.snantx.sbcglobal.net) |
| 13:26.28 | flog | teraflops: was it mopidy you showed off with that video earlier? |
| 13:26.36 | *** join/#debian monkey_master (~user@173.44.55.155) |
| 13:26.44 | teraflops | nope, it was gmusicproxy |
| 13:26.48 | flog | ah. |
| 13:26.57 | *** join/#debian Zvmdyv (~Zvmdyv@unaffiliated/zvmdyv) |
| 13:27.40 | *** join/#debian mayhew (~mayhew@hlfxns016cw-142068187229.dhcp-dynamic.FibreOp.ns.bellaliant.net) |
| 13:28.16 | *** join/#debian kiao2938 (~mj@dslb-088-066-253-070.088.066.pools.vodafone-ip.de) |
| 13:29.54 | *** join/#debian prototron (~prototron@cable-192.222.220.114.electronicbox.net) |
| 13:30.06 | *** join/#debian Strife89 (~quassel@adsl-98-80-187-67.mcn.bellsouth.net) |
| 13:31.17 | flog | teraflops: still not sure what is needed to get some sound out of my nuc. |
| 13:32.25 | *** join/#debian rimdeker (~rimdeker@unaffiliated/rimdeker) |
| 13:32.35 | prototron | hello. I have a USB drive auto mounted in /etc/fstab byt everything is mounted as a certain user, with persmission 777. I want mnt/sda1/pgsql_data to be owned by 'postgres:postgres'. How should I do that in order to use this folder as a PostgreSQL cluster, with the service starting at boot? |
| 13:33.16 | *** join/#debian MoonkYang (~moonkyang@de.bbido.com.yang.red) |
| 13:35.42 | teraflops | flog: what do you mean? no sound there? |
| 13:35.53 | *** join/#debian lesik (~lesik@p200300514D111F015EC5D4FFFEBBE8FB.dip0.t-ipconnect.de) |
| 13:37.01 | teraflops | flog: if you do pulseaudio, it works per-user and if you dont do xorg youll have bad times on jessie, I'd recommend alsa if you do cli |
| 13:37.19 | jelly | flog, what did you try so far? |
| 13:37.33 | teraflops | flog: unless you want pulseaudio systemwide (not a great idea) |
| 13:38.06 | flog | basically just installed mopidy. |
| 13:38.14 | poeticrpm | does the init image need anything more than 'xts' and 'aes_amd64' in /etc/initramfs-tools/modules? |
| 13:38.17 | *** join/#debian jackbrown (~se@unaffiliated/jackbrown) |
| 13:38.21 | poeticrpm | if i use luks |
| 13:38.24 | poeticrpm | sorry |
| 13:38.39 | flog | teraflops: so also would be the way to go. |
| 13:38.56 | *** join/#debian AirPlanes (~ShortBob@bzq-79-183-44-63.red.bezeqint.net) |
| 13:38.57 | poeticrpm | it might be also 'aes_x86_64', but I cant find it in the wiki or google. |
| 13:39.34 | *** join/#debian davi (~davi@gnu/davi) |
| 13:39.50 | *** join/#debian ktchk (~eddie6929@n219079227098.netvigator.com) |
| 13:39.59 | *** join/#debian jackbrown (~se@unaffiliated/jackbrown) |
| 13:40.25 | teraflops | flog: yes, alsa or https://gist.github.com/Earnestly/4acc782087c0a9d9db58 |
| 13:40.58 | *** join/#debian iWaldo (iWaldo___@unaffiliated/iwaldo) |
| 13:41.08 | teraflops | flog: ^or pulseadio systemwide (bad idea if you ask me) |
| 13:42.27 | *** join/#debian v01t (~v01t@p4FE445A5.dip0.t-ipconnect.de) |
| 13:42.54 | *** join/#debian Tom01 (~tom@p5DDFED8E.dip0.t-ipconnect.de) |
| 13:44.03 | *** join/#debian mtn (~mtn@72.168.160.12) |
| 13:44.29 | *** join/#debian aau (~aau@5.141.219.182) |
| 13:45.03 | *** join/#debian Guest51884 (~Artpicre@vit94-10-78-240-193-57.fbx.proxad.net) |
| 13:46.42 | *** join/#debian youellet__ (~youellet@QUBCPQ14-1168110674.sdsl.bell.ca) |
| 13:46.55 | *** join/#debian marvn (~marvn@46.33.broadband3.iol.cz) |
| 13:47.20 | flog | teraflops: just getting unable to open slave on audiotesting with alsa. |
| 13:47.57 | teraflops | flog: please paste the exact error output and what are you trying to do |
| 13:48.18 | *** join/#debian raonyguimaraes (~T0rch@pac113.internetdsl.tpnet.pl) |
| 13:48.22 | *** join/#debian penguinguru (~penguingu@120.146.12.20) |
| 13:48.40 | *** join/#debian plasm0duck (~cjg@103.251.66.171) |
| 13:49.00 | flog | http://pastie.org/private/pmrft8qyh1xxyobar3eq |
| 13:50.41 | teraflops | flog: do you have a ~/.asoundrc file? |
| 13:50.45 | tokage | official debian gnu/hurd when? |
| 13:51.15 | flog | let me check |
| 13:51.34 | flog | teraflops: nope |
| 13:51.56 | *** join/#debian CHCl3 (~CHCl3@95.61.147.160) |
| 13:52.15 | teraflops | flog: then check /etc/asound.conf for systemwide |
| 13:52.47 | flog | no asound.conf |
| 13:52.57 | *** join/#debian Velveeta_Chef (~Nope@24-151-37-213.dhcp.nwtn.ct.charter.com) |
| 13:52.57 | *** join/#debian Velveeta_Chef (~Nope@fsf/member/Velveeta-Chef) |
| 13:54.05 | *** join/#debian somazero (~somazero@ip72-198-80-101.ok.ok.cox.net) |
| 13:54.17 | teraflops | flog: my alsa-fu is a joke, take a look at https://wiki.archlinux.org/index.php/Advanced_Linux_Sound_Architecture/Troubleshooting or some other troubleshooting guide is my best advice |
| 13:54.32 | *** join/#debian WormDude (~wormfood@113.89.206.168) |
| 13:55.37 | flog | mkay will do. |
| 13:56.40 | *** join/#debian yeats (~chris@unaffiliated/yeats) |
| 13:57.29 | *** join/#debian MoonkYang (~moonkyang@de.bbido.com.yang.red) |
| 13:57.42 | *** join/#debian AirPlanes (~ShortBob@bzq-79-183-44-63.red.bezeqint.net) |
| 13:58.22 | *** join/#debian b (~glen@unaffiliated/ridout) |
| 13:58.43 | *** join/#debian Portable_Cheese (~Dani@24-151-37-213.dhcp.nwtn.ct.charter.com) |
| 13:58.55 | *** join/#debian jim_carry (~jim_carry@unaffiliated/jim-carry/x-1372289) |
| 14:02.38 | flog | teraflops: could not having an audio group be an issue? |
| 14:02.57 | *** join/#debian jackbrown (~se@unaffiliated/jackbrown) |
| 14:04.18 | *** join/#debian nog3_ (~tud3@arsenigladkov.plus.com) |
| 14:04.42 | *** join/#debian jackbrown (~se@unaffiliated/jackbrown) |
| 14:05.06 | *** join/#debian SCHAAP137 (~dorian@unaffiliated/schaap137) |
| 14:05.18 | *** join/#debian nog3_ (~tud3@arsenigladkov.plus.com) |
| 14:05.25 | *** join/#debian pavlushka (~Pavel@unaffiliated/pavlushka) |
| 14:05.46 | *** join/#debian Korolev (~Korolev@2601:586:c403:a570:81c1:15e2:86f3:7d28) |
| 14:06.43 | *** join/#debian aliasnumber11 (~AN@cpe-76-167-192-248.san.res.rr.com) |
| 14:06.56 | teraflops | for alsa? yes |
| 14:07.05 | teraflops | flog: https://wiki.debian.org/ALSA |
| 14:07.14 | *** join/#debian dionysus69 (~Icedove@unaffiliated/dionysus69) |
| 14:07.51 | *** join/#debian Strife89|Quassel (~quassel@adsl-98-80-184-74.mcn.bellsouth.net) |
| 14:08.00 | *** mode/#debian [+l 1646] by debhelper |
| 14:09.01 | *** join/#debian SpeccyMan (~nick@94.197.121.128.threembb.co.uk) |
| 14:09.47 | *** join/#debian Al3xG0 (~t7DS@unaffiliated/al3xg0) |
| 14:10.04 | flog | oh i was member of audio. |
| 14:10.41 | *** join/#debian Qann (~Nomad@hades.golgeli.net) |
| 14:13.05 | *** join/#debian sonOfRa (sonOfRa@btbn.de) |
| 14:13.50 | *** join/#debian ArchNoob (~ArchNoob@unaffiliated/archnoob) |
| 14:15.27 | *** join/#debian lucdalton (~lucdalton@host86-171-96-235.range86-171.btcentralplus.com) |
| 14:16.18 | *** join/#debian onyx (~onyx@184.75.215.178) |
| 14:16.18 | *** join/#debian anuxivm (~anuxi@92.185.151.238) |
| 14:16.38 | Guest70820 | I'm trying to get my system to recognize my xbox 360 controller so I can play emulators. it's not being recognized. the light is lit though but I can't get it to be recognized. I installed xboxdrv and blacklisted xpad. here's some additional information: http://dpaste.com/1ZENJW9 can anyone help me? It would be appreciated. i installed the drivers and got the xbox 360 light on to 1 light but qjoypad won't respond and neither will it respond on my VBA |
| 14:16.38 | Guest70820 | emulator. But it does seem to work with jstest-gtk. There is button response when using that program. |
| 14:17.14 | *** join/#debian Strife89 (~quassel@adsl-98-67-58-244.mcn.bellsouth.net) |
| 14:19.48 | *** join/#debian ven00m (~ven00m@230-148-113-92.pool.ukrtel.net) |
| 14:20.16 | *** join/#debian silverhom (~silverhom@c83-252-233-107.bredband.comhem.se) |
| 14:24.29 | *** join/#debian jim_carry (~jim_carry@unaffiliated/jim-carry/x-1372289) |
| 14:24.40 | *** join/#debian D-Boy (~D-Boy@unaffiliated/cain) |
| 14:25.22 | *** join/#debian badiane (~badiane@cpe-24-193-80-159.nyc.res.rr.com) |
| 14:26.33 | *** join/#debian K|nG (~Thunderbi@82.114.89.146) |
| 14:27.02 | K|nG | hiu |
| 14:27.22 | *** join/#debian ChubaDuba (~ChubaDuba@93.178.89.51) |
| 14:27.44 | *** join/#debian CapsAdmin (~CapsAdmin@ti0115a400-1989.bb.online.no) |
| 14:28.10 | *** join/#debian AusteritySucks (~Austerity@unaffiliated/austeritysucks) |
| 14:30.00 | *** join/#debian n0wje (~anthony@71-36-51-107.albq.qwest.net) |
| 14:30.47 | *** join/#debian kunaaljain______ (~kunaaljai@122.167.124.238) |
| 14:32.18 | *** join/#debian Strife89|Quassel (~quassel@adsl-98-80-188-92.mcn.bellsouth.net) |
| 14:33.30 | *** join/#debian ven00m (~ven00m@230-148-113-92.pool.ukrtel.net) |
| 14:33.57 | *** join/#debian RebelCoder (~jurisl85@cpc74579-lewi13-2-0-cust201.2-4.cable.virginm.net) |
| 14:34.48 | *** join/#debian efdetonator (~efdetonat@177.206.199.23.dynamic.adsl.gvt.net.br) |
| 14:36.27 | *** join/#debian ArchNoob (~ArchNoob@unaffiliated/archnoob) |
| 14:38.01 | *** mode/#debian [+l 1640] by debhelper |
| 14:39.49 | *** join/#debian AirPlanes (~ShortBob@bzq-79-183-44-63.red.bezeqint.net) |
| 14:40.22 | *** join/#debian Velveeta_Chef (~Nope@fsf/member/Velveeta-Chef) |
| 14:40.31 | *** join/#debian nikoma (~nikoma@95.82.135.130) |
| 14:40.38 | *** join/#debian controll (~a@233.94.223.87.dynamic.jazztel.es) |
| 14:41.57 | *** join/#debian thunderrd (~thunderrd@110.77.239.88) |
| 14:43.08 | *** join/#debian renergy (~renergy@187.234.broadband11.iol.cz) |
| 14:46.42 | *** join/#debian jim_carry (~jim_carry@unaffiliated/jim-carry/x-1372289) |
| 14:47.46 | *** join/#debian VladimirVolkov (~VladimirV@37.204.196.81) |
| 14:48.33 | *** join/#debian Tetrazene (~Carp@2601:49:c302:560:41b4:b5d8:ae49:1908) |
| 14:48.57 | *** join/#debian Fomina (~Discovery@ip-176-199-137-160.hsi06.unitymediagroup.de) |
| 14:49.21 | *** join/#debian rsx (~dummy@ppp-93-104-43-255.dynamic.mnet-online.de) |
| 14:50.07 | *** join/#debian epochsal (~epochsal@208.167.254.224) |
| 14:52.18 | *** join/#debian brokencycle (~brokencyc@114.245.96.27) |
| 14:52.24 | *** join/#debian jim_carry (~jim_carry@unaffiliated/jim-carry/x-1372289) |
| 14:52.37 | *** join/#debian RebelCoder (~jurisl85@cpc74579-lewi13-2-0-cust201.2-4.cable.virginm.net) |
| 14:54.08 | *** join/#debian Korolev (~Korolev@2601:586:c403:a570:81c1:15e2:86f3:7d28) |
| 14:55.44 | *** join/#debian AndyBotwin (~Gustavo@unaffiliated/andybotwin) |
| 14:55.50 | kuldeep | earlier i was posted for request looking for "mantainer" i meant "debian packages mantainer" (not the software development). |
| 14:56.56 | kuldeep | if someone missed, we are looking for debian packages mantainer for http://madresistor.org/box0 softwares. (source at http://gitlab.com/madresistor/). (Software/Hardware GPLv3+, Data Acquisition - Scientific Software) |
| 14:57.18 | *** join/#debian ven00m (~ven00m@230-148-113-92.pool.ukrtel.net) |
| 14:58.49 | *** join/#debian mekeor (~quassel@2a02:8070:d293:ff00:c6d9:87ff:fe26:2947) |
| 14:59.04 | kuldeep | any tip what should i do next? (maybe if this is not the right approch or place) |
| 15:00.04 | *** join/#debian fanderal (~chatzilla@142-254-29-23.dsl.dynamic.fusionbroadband.com) |
| 15:01.41 | blawiz | in 'echo -e "\e[00;31m\nfoobar\e[00m"|less -R' less -R doesnt show the text as red unless the \n is removed... is it a bug? eg 'more' show the right color |
| 15:02.35 | *** join/#debian cuechan (~paul@x55b08813.dyn.telefonica.de) |
| 15:02.36 | *** part/#debian fanderal (~chatzilla@142-254-29-23.dsl.dynamic.fusionbroadband.com) |
| 15:03.51 | *** join/#debian benkard (~benkard@2001:a61:15a:fb01:8842:6a36:d7a:6df5) |
| 15:04.34 | *** join/#debian dionysus69 (~Icedove@unaffiliated/dionysus69) |
| 15:04.42 | *** join/#debian jim_carry (~jim_carry@unaffiliated/jim-carry/x-1372289) |
| 15:05.27 | *** join/#debian theviajerock (~victor@cable201-232-160-169.epm.net.co) |
| 15:05.32 | careta | I'm going insane with gtk3 themes |
| 15:05.41 | careta | my gnome calculator doesn't show any buttons, they are all flat |
| 15:05.47 | *** join/#debian Meerkat (~meerkat@unaffiliated/meerkat) |
| 15:05.53 | careta | how do I reset all gtk3 settings and then change it using lxappearance? |
| 15:06.24 | *** join/#debian rudar (~rudar@94.161.213.110) |
| 15:06.37 | *** join/#debian oish (~charlie@159.22.169.217.in-addr.arpa) |
| 15:06.47 | teraflops | careta: are you in jessie? |
| 15:06.47 | *** join/#debian Anselmo (~Anselmo@184.101.115.127) |
| 15:07.33 | careta | teraflops, mix stable with testing |
| 15:07.38 | *** join/#debian vjacob (~vjacob@ip1.c3268.amb314.cust.comxnet.dk) |
| 15:07.48 | teraflops | pining? |
| 15:07.53 | Meerkat | recently xscreensaver started activating the unlock window every time the timer runs out. I unplugged the mouse and keyboard just incase one of them caused some kind of input but it still happens. Is this a known issue on Debian 8? |
| 15:08.00 | *** mode/#debian [+l 1649] by debhelper |
| 15:08.19 | careta | teraflops, yes, most of it is stable but I have some testing packages such as vbox |
| 15:08.32 | vjacob | hi all. what can I do besides "dpkg --configure -a" to finish a problematic dpkg install round? |
| 15:09.08 | vjacob | Presently I just want to do one thing, but I am unsure how: I want to cancel or drop the installation of the package in question simply |
| 15:09.41 | *** join/#debian ArchDuke (~ArchDuke@unaffiliated/archduker) |
| 15:09.48 | *** join/#debian easyshekels (~easysheke@bzq-109-67-218-206.red.bezeqint.net) |
| 15:09.51 | vjacob | the reason? dpkg is just hanging there without anything going on when I do "dpkg --configure -a" |
| 15:09.53 | teraflops | careta: which version is gtk+3.0 there? |
| 15:11.41 | teraflops | careta: I ask it because 3.20 is a major release and many gtk3 themes are broken with that version |
| 15:12.02 | careta | teraflops, I'm being dumb, what's the package name again? |
| 15:12.15 | *** join/#debian f10_ (~flo@2001:470:52af:1:7154:9677:ab5c:79d3) |
| 15:12.18 | teraflops | ,v gtk+3.0 |
| 15:12.19 | judd | No package named 'gtk+3.0' was found in amd64. |
| 15:12.24 | teraflops | dang |
| 15:12.37 | teraflops | ,v gtk+ |
| 15:12.38 | judd | No package named 'gtk+' was found in amd64. |
| 15:12.50 | teraflops | ok I bail on the bot |
| 15:13.13 | careta | weird, I'm able to find libgtk2.0 (v 2.24.30) but can't find any gtk3 lib package |
| 15:13.34 | *** join/#debian jass93 (~ifillj@dhcp-18-111-6-136.dyn.MIT.EDU) |
| 15:13.36 | *** join/#debian jubo2 (~juboxi@176-93-56-182.bb.dnainternet.fi) |
| 15:13.36 | *** join/#debian jubo2 (~juboxi@wikipedia/jukeboksi) |
| 15:14.04 | careta | either installed or not |
| 15:14.16 | *** join/#debian sydney_untangle (~sydney@supertux/sydney) |
| 15:14.22 | *** join/#debian ArchNoob (~ArchNoob@unaffiliated/archnoob) |
| 15:14.26 | teraflops | ,v libgtk-3-0 |
| 15:14.27 | judd | Package: libgtk-3-0 on amd64 -- wheezy: 3.4.2-7+deb7u1; jessie: 3.14.5-1+deb8u1; stretch: 3.20.6-2; sid: 3.20.6-2 |
| 15:14.30 | teraflops | ^ |
| 15:14.55 | careta | yup 3.20 |
| 15:15.28 | careta | the thing is: today I did an upgrade, and because of some testing lib I had to remove the gtk3-engines-oxygen package (it doesn't exist more in testing) |
| 15:15.36 | careta | after that all gtk3 apps look like crap |
| 15:15.39 | teraflops | well, just check the themes youre installing are gtk+3.20 compatibles |
| 15:15.54 | *** join/#debian lasdam (john@unaffiliated/lasdam) |
| 15:15.54 | *** join/#debian lasdam (john@gateway/vpn/mullvad/x-hqnknqqzlseixhpz) |
| 15:15.55 | careta | I've used lxappearance to change to lots of different themes, still have the same problem |
| 15:15.58 | careta | even with system themes |
| 15:16.10 | careta | it must be some retarded setting on a config file |
| 15:16.28 | vjacob | no ideas anyone? |
| 15:17.04 | *** join/#debian Quatroking_ (~Quatrokin@5070983A.static.ziggozakelijk.nl) |
| 15:17.34 | teraflops | careta: delete your ~/.config/gtk-3.0/ then and start over |
| 15:17.41 | teraflops | s/delete/rename |
| 15:18.05 | *** join/#debian Iruoy_ (~Iruoy@188.207.126.86) |
| 15:18.41 | *** join/#debian dob1 (~federico@151.51.154.243) |
| 15:19.12 | dob1 | hi, how is the support for skylake for jessie? |
| 15:19.26 | teraflops | careta: oh that branch mix issue may cause it too, I cannot help you with that though |
| 15:25.35 | *** join/#debian BalTun (~BalTun@5.149.211.122) |
| 15:26.52 | *** join/#debian awal1 (~awal1@199.241.132.84) |
| 15:29.46 | *** join/#debian TrivialGravitas (~Zero@c-50-160-118-46.hsd1.ut.comcast.net) |
| 15:30.12 | vjacob | dpkg -r -a ... and dpkg -P -a ...are also not of much help |
| 15:30.12 | dpkg | removes -a ... and dpkg -P -a ...are also not of much help along with a pound of flesh from vjacob's body, then staples vjacob back up with a staple gun. |
| 15:30.30 | vjacob | nice one. |
| 15:31.48 | *** join/#debian _0bitcount (~Big_Byte@92.176.142.156) |
| 15:31.56 | careta | teraflops, looks like gtk3 is still using the old theme |
| 15:32.00 | careta | doesn't update to the new one |
| 15:32.11 | careta | when I start gnome-calculator, it refers to a file in the old theme |
| 15:33.08 | careta | I have no idea where it is picking up that config... it's not in my .config/gtk-3.0/settings.ini |
| 15:33.13 | careta | that file points to the new theme |
| 15:33.27 | *** join/#debian patterson_ (~patterson@73.93.142.234) |
| 15:33.53 | *** join/#debian Pr0t3us (~Pr0t3us@gateway/vpn/privateinternetaccess/pr0t3us) |
| 15:34.35 | *** join/#debian Pr0t3us (~Pr0t3us@gateway/vpn/privateinternetaccess/pr0t3us) |
| 15:34.56 | *** join/#debian asterismo_m (~asterismo@r179-29-27-164.dialup.mobile.ancel.net.uy) |
| 15:35.04 | *** join/#debian eric (~eric@200.106.89.98) |
| 15:35.15 | *** join/#debian asterismo_m (~asterismo@r179-29-27-164.dialup.mobile.ancel.net.uy) |
| 15:36.52 | *** join/#debian kpease (~kpease@pool-108-20-29-33.bstnma.fios.verizon.net) |
| 15:37.35 | teraflops | careta: no idea sorry, youre mixing branches and I dont know if it's related to your issue or not |
| 15:37.59 | *** join/#debian mtn (~mtn@72.168.160.80) |
| 15:38.25 | Guest59288 | hello |
| 15:38.35 | *** join/#debian somiaj (~jaimos@unaffiliated/somiaj) |
| 15:38.56 | *** join/#debian AirPlanes (~ShortBob@bzq-79-183-44-63.red.bezeqint.net) |
| 15:39.09 | *** part/#debian Guest59288 (~eric@200.106.89.98) |
| 15:39.31 | *** join/#debian PryMar56 (~prymar@unaffiliated/prymar56) |
| 15:39.58 | *** join/#debian jim_carry (~jim_carry@unaffiliated/jim-carry/x-1372289) |
| 15:40.44 | *** join/#debian Makaveli7 (~Makaveli7@46.197.149.93) |
| 15:40.53 | *** join/#debian wulllst (~msi@dslb-088-073-173-232.088.073.pools.vodafone-ip.de) |
| 15:41.13 | *** join/#debian poeticrpm (~poeticrpm@109.163.226.153) |
| 15:41.39 | *** join/#debian asterismo_m (~asterismo@179.26.145.128) |
| 15:41.54 | *** join/#debian asterismo_m (~asterismo@179.26.145.128) |
| 15:41.59 | *** join/#debian LtL (~ltl@unaffiliated/ltl) |
| 15:42.18 | *** join/#debian cuechan (~paul@x55b08813.dyn.telefonica.de) |
| 15:42.59 | *** join/#debian mirage335 (~mirage335@64.79.53.118) |
| 15:44.12 | *** join/#debian crafty1 (~crafty1@2601:98b:8201:3078:c5f0:19e7:f1fa:d275) |
| 15:45.19 | wulllst | on my system (debian jessie, openbox, no display manager) it is not possible to shut down the system as a normal user. i know, i can change that eihter by editing the sudoers file accordingly or (as man shutdown suggests) creating /etc/shutdown.allow an put the names of authorized users into that file. |
| 15:45.40 | *** join/#debian timahvo1 (~rogue@197.237.131.64) |
| 15:46.20 | *** join/#debian lucaswang (~lucaswang@183.167.211.9) |
| 15:47.07 | *** join/#debian RA3OR (~demon@unaffiliated/ra3or) |
| 15:48.02 | Pr0t3us | wullst was there a question there? ;p |
| 15:48.43 | *** join/#debian Maxou56800 (~Maxou5680@195.154.241.61) |
| 15:48.48 | *** join/#debian blueness (~blueness@gentoo/developer/blueness) |
| 15:49.07 | wulllst | Pr0t3us: just the intro to a question. i'm of the slow kind and think a lot. |
| 15:49.22 | *** join/#debian v01t (~v01t@p4FE445A5.dip0.t-ipconnect.de) |
| 15:50.04 | *** join/#debian bluenemo (~bluenemo@unaffiliated/bluenemo) |
| 15:50.20 | wulllst | now, i was wondering which of these is the best or standard way to do it. so, i installed debian (wheezy, for it was the only thing i had laying around) with the standard desktop environment on a test machine. strangely, the sudoers file of that system does not include any line allowing me or a specific group to shutdown the system. also, there is no /etc/shutdown.allow file. still, i can shut the machien downand reboot. so, |
| 15:50.33 | vjacob | a reboot did the trick. thankfully. |
| 15:50.36 | *** part/#debian vjacob (~vjacob@ip1.c3268.amb314.cust.comxnet.dk) |
| 15:51.16 | *** join/#debian bluenemo (~bluenemo@unaffiliated/bluenemo) |
| 15:52.03 | *** join/#debian AirPlanes (~ShortBob@bzq-79-183-44-63.red.bezeqint.net) |
| 15:52.06 | *** join/#debian krytarik (~krytarik@xebian/developer/krytarik) |
| 15:53.06 | wulllst | ok, i see gdm 3 is run by root... |
| 15:53.22 | *** join/#debian jim_carry (~jim_carry@unaffiliated/jim-carry/x-1372289) |
| 15:53.32 | wulllst | that's clever |
| 15:53.52 | *** join/#debian ustreamer-81981 (~ustreamer@112.136.40.125.er.eaccess.ne.jp) |
| 15:59.50 | RebelCoder | Guys, is there a way to force OpenGL application, that runs in a full screen, to run on 1 of 2 of the screens? It does not have native support for choosing which screen to run on. |
| 16:00.18 | RebelCoder | An maxes out on both and messes up the desktop... |
| 16:00.39 | *** join/#debian jim_carry (~jim_carry@unaffiliated/jim-carry/x-1372289) |
| 16:00.58 | *** join/#debian Putti (~Putti@unaffiliated/putti) |
| 16:02.04 | *** join/#debian s4ndm4n (~sandman@unaffiliated/sandman13) |
| 16:02.32 | *** join/#debian s4ndm4n (~sandman@unaffiliated/sandman13) |
| 16:02.46 | *** part/#debian blawiz (~DD_comman@unaffiliated/blawiz) |
| 16:02.48 | *** join/#debian philipballew (~philip@ubuntu/member/philipballew) |
| 16:02.55 | Putti | Is there any installer to get straight into sid? |
| 16:03.04 | Putti | I only see for stable and testing |
| 16:03.35 | *** join/#debian efdetonator (~efdetonat@177.206.199.23.dynamic.adsl.gvt.net.br) |
| 16:03.38 | Putti | So to get to sid should I install for example testing and then update the sources list to point to sid? |
| 16:04.02 | *** join/#debian SilverWhitefish (~hidden@68-200-88-239.res.bhn.net) |
| 16:04.26 | Epakai | yes |
| 16:04.32 | Putti | ok |
| 16:06.04 | TomTomTosch | Putti: no, you should install stable then upgrade. |
| 16:06.11 | TomTomTosch | !testing installer |
| 16:06.11 | dpkg | Repeat after me: the testing installer is for testing the <installer>, not for installing <testing>. To install testing, do a minimal installation using the <stable> installer and ask me about <stable->testing>. Installer bugs should be filed against the debian-installer pseudopackage. https://www.debian.org/devel/debian-installer/ |
| 16:06.26 | *** join/#debian safe (~safe@unaffiliated/safe) |
| 16:06.33 | Putti | TomTomTosch, well the stable installer ain't gonna work for me, so I have to go for the testing |
| 16:07.39 | *** join/#debian canopus (~canopus@unaffiliated/pierrot) |
| 16:07.47 | TomTomTosch | why wouldn't it and have you actually tried? |
| 16:07.53 | *** join/#debian jim_carry (~jim_carry@unaffiliated/jim-carry/x-1372289) |
| 16:08.01 | *** mode/#debian [+l 1656] by debhelper |
| 16:08.19 | Putti | TomTomTosch, I'm using a skylake system and it needs minimum of 4.4 kerne |
| 16:08.33 | *** join/#debian texla (~ray@h215.203.20.98.dynamic.ip.windstream.net) |
| 16:08.39 | TomTomTosch | then good luck. |
| 16:09.10 | Putti | TomTomTosch, haha, so I have always wanted to contribute really to Debian so now I can start filing some bugs as I will be using sid |
| 16:09.15 | *** join/#debian sebastianlutter (~sebastian@x4db3cfe4.dyn.telefonica.de) |
| 16:12.56 | *** join/#debian eichenwald (~eichenwal@unaffiliated/eichenwald) |
| 16:13.03 | *** join/#debian acerna (sid35969@gateway/web/irccloud.com/x-adjglioczzxgibcr) |
| 16:14.19 | *** join/#debian prototron (~prototron@cable-192.222.220.114.electronicbox.net) |
| 16:14.51 | *** join/#debian cra1g321 (~craig@5.80.165.228) |
| 16:16.55 | *** join/#debian TZander (~quassel@kde/zander) |
| 16:17.36 | *** join/#debian cyan__ (~cyan@d152-122.icpnet.pl) |
| 16:18.02 | TZander | anyone here uses stretch and KDE ? Since an update a couple of days ago various core features in kde stopped working. Can anyone confirm they areseeing the same? |
| 16:18.31 | TZander | for instance 'search' in the start menu or the whole 'krunner' fails to function |
| 16:18.34 | *** join/#debian Iruoy (~Iruoy@541AB51C.cm-5-3c.dynamic.ziggo.nl) |
| 16:19.38 | *** join/#debian l3archos (~Icedove@unaffiliated/l3archos) |
| 16:20.27 | *** join/#debian CeBe (~CeBe@a81-14-235-90.net-htp.de) |
| 16:20.42 | *** join/#debian jim_carry (~jim_carry@unaffiliated/jim-carry/x-1372289) |
| 16:20.50 | *** join/#debian ven00m (~ven00m@230-148-113-92.pool.ukrtel.net) |
| 16:21.17 | *** part/#debian serduk (~IceChat78@193.110.113.74) |
| 16:21.40 | *** join/#debian Velveeta_Chef (~Nope@fsf/member/Velveeta-Chef) |
| 16:25.19 | *** join/#debian InfoTest (~Thunderbi@tgn.149.24.207.dts.mg) |
| 16:26.22 | *** join/#debian com33 (~com33@c-69-141-134-89.hsd1.nj.comcast.net) |
| 16:28.29 | *** part/#debian tgunr (~davec@cpe-66-91-34-168.hawaii.res.rr.com) |
| 16:29.00 | *** join/#debian m8 (~m8@unaffiliated/m8) |
| 16:29.07 | *** join/#debian benkard (~benkard@2001:a61:15a:fb01:88e0:a1e6:a152:eb20) |
| 16:32.31 | *** join/#debian raonyguimaraes (~T0rch@pac113.internetdsl.tpnet.pl) |
| 16:33.41 | *** join/#debian Uf0 (~luna@4.164.250.195.sta.estpak.ee) |
| 16:35.43 | *** join/#debian Iruoy (~Iruoy@ip211-144-172-82.adsl2.static.versatel.nl) |
| 16:38.42 | *** join/#debian seoner (~usr@unaffiliated/sand3r) |
| 16:40.28 | *** join/#debian robotroll (~robotroll@unaffiliated/robotroll) |
| 16:40.36 | *** join/#debian msteinberg (~msteinber@c-73-237-162-150.hsd1.ga.comcast.net) |
| 16:41.13 | *** join/#debian wildlander (~wild@unaffiliated/wildlander) |
| 16:44.00 | *** join/#debian electro33 (uid613@gateway/web/irccloud.com/x-bmhtcnhxakhfnliv) |
| 16:44.09 | *** join/#debian dmr (~dmr@fsf/member/dmr) |
| 16:44.10 | *** join/#debian aaro (~aaro@unaffiliated/xyox/x-040147) |
| 16:44.16 | *** join/#debian cra1g321 (~craig@5.80.165.228) |
| 16:44.25 | *** join/#debian slicepaperwords (~slicepape@c-76-29-44-233.hsd1.il.comcast.net) |
| 16:44.56 | *** join/#debian ArchNoob (~ArchNoob@unaffiliated/archnoob) |
| 16:45.15 | RebelCoder | guys, how to list displays and names for them ? I have 2 connected |
| 16:45.25 | RebelCoder | they are not called Device0 and Device1 for me... |
| 16:46.35 | TomTomTosch | RebelCoder: xrandr -q |
| 16:47.09 | *** join/#debian Yukiteru (~Yukiteru@unaffiliated/yukiteru) |
| 16:48.08 | *** join/#debian Tarjaizaid (~Sylvain@unaffiliated/tarjaizaid) |
| 16:48.47 | *** join/#debian oish (~charlie@159.22.169.217.in-addr.arpa) |
| 16:48.59 | *** join/#debian Makaveli7 (~Makaveli7@46.197.149.93) |
| 16:51.00 | *** join/#debian plasmoduck (~cjg@103.27.224.135) |
| 16:51.18 | *** join/#debian AirPlanes (~ShortBob@bzq-79-183-44-63.red.bezeqint.net) |
| 16:53.02 | RebelCoder | TomTomTosch, thanks, that is almost it, but it does not list names of displays... |
| 16:53.28 | RebelCoder | I am trying to run this openGL app and it needs the name of display |
| 16:53.42 | RebelCoder | primusrun glxgears -display <name> |
| 16:54.17 | *** join/#debian de-facto (~de-facto@unaffiliated/de-facto) |
| 16:54.32 | *** join/#debian eSa| (~esa@host117-236-dynamic.54-82-r.retail.telecomitalia.it) |
| 16:55.29 | *** join/#debian T4ng10r (~Tanglor@90-156-73-132.internetia.net.pl) |
| 16:56.10 | TomTomTosch | ah, you can type echo "$DISPLAY" to see the display name or just pass the DISPLAY variable to that command. |
| 16:56.24 | *** join/#debian Strife89 (~quassel@adsl-98-80-192-52.mcn.bellsouth.net) |
| 16:57.12 | RebelCoder | But echo only shows 1 Display and the name is just :0 |
| 16:57.18 | RebelCoder | Ok... I will keep hacking |
| 16:57.24 | *** join/#debian mastokley (~mastokley@75-165-54-193.tukw.qwest.net) |
| 16:58.01 | *** mode/#debian [+l 1662] by debhelper |
| 16:58.27 | *** join/#debian VladimirVolkov (~VladimirV@37.204.196.81) |
| 16:58.34 | shadows | RebelCoder: "display" is an X11 terminology |
| 16:58.51 | shadows | RebelCoder: the "display" can have multiple monitor outputs |
| 16:58.54 | *** join/#debian b (~glen@unaffiliated/ridout) |
| 16:59.17 | shadows | think of it like the display in memory and not the visual what you see on your physical screens |
| 16:59.26 | TomTomTosch | your frame buffer is simply the size of your two screens. |
| 16:59.30 | shadows | RebelCoder: use 'xrandr' for more detail about a "display" |
| 17:00.44 | *** join/#debian AirPlanes (~ShortBob@bzq-79-183-44-63.red.bezeqint.net) |
| 17:01.01 | *** join/#debian tlab (~tlab@104.235.20.44) |
| 17:01.22 | *** join/#debian nmschulte (~nmschulte@97-119-28-212.omah.qwest.net) |
| 17:01.23 | *** join/#debian garn32 (~James@50-78-68-121-static.hfc.comcastbusiness.net) |
| 17:01.30 | *** join/#debian lucaswang (~lucaswang@14.47.125.218) |
| 17:01.47 | *** join/#debian Guest99875 (~nmschulte@unaffiliated/reklipz) |
| 17:02.37 | *** part/#debian wingman2 (~wingman2@web.innestech.net) |
| 17:02.56 | *** join/#debian Tom012 (~tom@p5DDFF1BD.dip0.t-ipconnect.de) |
| 17:02.58 | garn32 | I'm on debian 8.4 and when using at Display Port monitor I cannot get anything on my screen when I enter in to a TTY via ctl+alt+F<N>, any one have a clue on how to fix this? |
| 17:03.29 | *** join/#debian MrAlexandr0 (~MrAlexand@43.232.251.212.customer.cdi.no) |
| 17:03.55 | shadows | garn32: not unusual |
| 17:04.00 | jelly | garn32: but with VGA or DVD or HDMI it works? |
| 17:04.08 | jelly | DVI* |
| 17:04.11 | *** join/#debian dionysus69 (~Icedove@unaffiliated/dionysus69) |
| 17:04.30 | garn32 | jelly, I hav a second DVI monitor to compensate for the issue but would love to ditch the second monitor |
| 17:04.36 | *** join/#debian cdown_ (~cdown@82-132-231-226.dab.02.net) |
| 17:05.34 | jelly | garn32: if you disconnect the second monitor and reboot, do you see initial bootup console messages on the DP connected display? |
| 17:06.26 | garn32 | jelly: I don't think so but I've updated a few times since the last test now that you mention it, I'll be back in just a bit |
| 17:08.01 | *** join/#debian amcorreia (~amcorreia@2804:7f5:280:329f::2) |
| 17:10.32 | *** join/#debian silverhom (~silverhom@c83-252-233-107.bredband.comhem.se) |
| 17:10.47 | *** join/#debian lucaswan_ (~lucaswang@183.167.211.9) |
| 17:11.19 | *** join/#debian garn32 (~James@50-78-68-121-static.hfc.comcastbusiness.net) |
| 17:11.42 | garn32 | jelly: nope when boot no image to the DP monitor if no other monitors are connected |
| 17:15.21 | *** join/#debian js9601 (~Thunderbi@87-57-20-106-dynamic.dk.customer.tdc.net) |
| 17:15.36 | *** join/#debian sm4sh (~smash@ip4-83-240-63-212.cust.nbox.cz) |
| 17:15.37 | *** join/#debian QORRiE (~dorian@unaffiliated/schaap137) |
| 17:16.03 | *** join/#debian hosttor (~user@c-73-68-219-125.hsd1.ma.comcast.net) |
| 17:16.41 | *** join/#debian lsv (~nn@CPE84948c2eddc1-CM84948c2eddc0.cpe.net.cable.rogers.com) |
| 17:18.01 | *** mode/#debian [+l 1655] by debhelper |
| 17:19.04 | *** join/#debian asterismo_m2 (~asterismo@r179-29-184-42.dialup.mobile.ancel.net.uy) |
| 17:19.14 | *** join/#debian asterismo_m2 (~asterismo@r179-29-184-42.dialup.mobile.ancel.net.uy) |
| 17:19.34 | *** join/#debian asterismo_m2 (~asterismo@r179-29-184-42.dialup.mobile.ancel.net.uy) |
| 17:20.06 | *** join/#debian polyphagia (~polyphagi@wnpgmb0412w-ds01-223-14.dynamic.mtsallstream.net) |
| 17:20.21 | *** join/#debian cyan__ (~cyan@d152-122.icpnet.pl) |
| 17:21.24 | awal1 | garn32, output of xrandr ? |
| 17:22.53 | *** join/#debian pavlushka (~Pavel@unaffiliated/pavlushka) |
| 17:22.56 | *** join/#debian w00die (~pi@95.73.39.237) |
| 17:23.59 | *** part/#debian polyphagia (~polyphagi@wnpgmb0412w-ds01-223-14.dynamic.mtsallstream.net) |
| 17:25.01 | garn32 | awal1: http://pastebin.com/AZjKiuVW |
| 17:25.40 | *** join/#debian sm4sh (~smash@ip4-83-240-63-212.cust.nbox.cz) |
| 17:26.43 | *** join/#debian Dyonisos (~Dyonisos@unaffiliated/dyonisos) |
| 17:27.33 | *** join/#debian bertbob (~bertbob@reriding.dsl.xmission.com) |
| 17:27.33 | *** join/#debian kuldeep (~kuldeepdh@unaffiliated/kuldeepdhaka) |
| 17:28.14 | *** join/#debian douzer (~douzer@unaffiliated/douzer) |
| 17:29.09 | awal1 | garn32, can you enable the dvi? |
| 17:30.17 | garn32 | awal1: I usually I have a dvi monitor attached, and it works perfectly fine, but the goal is to remove the dvi monitor and just have a single display, or am I misunderstanding your question? |
| 17:30.17 | awal1 | enable dp and dvi and check if you get ttys working in both |
| 17:30.25 | *** join/#debian superusr (~usr@p5B2448BD.dip0.t-ipconnect.de) |
| 17:30.40 | garn32 | awal1: when the dvi is connected only the dvi screen show the ttys |
| 17:30.46 | *** join/#debian earthundead (~earthunde@78.25.121.109) |
| 17:30.56 | garn32 | awal1: the dp screen reports no signal |
| 17:31.14 | *** join/#debian sm4sh (~smash@ip4-83-240-63-212.cust.nbox.cz) |
| 17:31.32 | awal1 | garn32, dp screen is not detected att all, no matters if the dvi is on or off? |
| 17:31.43 | jelly | garn32: the fact you don't even get an image on DP at boot even if it's the only output connected suggests the kernel driver has problems with it |
| 17:32.13 | garn32 | awal1: when in a graphical mode (init 3) the dp works fine |
| 17:32.19 | awal1 | exact, your problem garn32 is that your DP is not detected at boot time |
| 17:32.26 | garn32 | jelly: I would not be surprised |
| 17:33.16 | jelly | garn32: which gpu are you using and which driver? Show the "lspci -nn" line for it and pastebin your /var/log/Xorg.0.log |
| 17:33.36 | *** join/#debian Lokke (~Thunderbi@ip5f5ad235.dynamic.kabel-deutschland.de) |
| 17:33.46 | *** join/#debian benkard (~benkard@2001:a61:15a:fb01:d4bd:a01:5d17:655) |
| 17:34.43 | *** join/#debian timahvo1 (~rogue@197.237.131.64) |
| 17:35.12 | *** join/#debian efdetonator (~efdetonat@177.206.199.23.dynamic.adsl.gvt.net.br) |
| 17:36.17 | *** join/#debian edwardly (~edwardly@pool-108-26-225-137.bstnma.fios.verizon.net) |
| 17:36.17 | *** join/#debian edwardly (~edwardly@unaffiliated/edwardly) |
| 17:36.26 | *** join/#debian Warrigal (~tswett@192.241.237.138) |
| 17:37.43 | garn32 | jelly: http://pastebin.com/BSu6As3u |
| 17:37.54 | *** join/#debian pioiytr_ (~pioiytr@2601:246:8000:8380:50a4:6a7d:6303:4220) |
| 17:38.05 | garn32 | jelly: might have had an issue on the pastebin one moment |
| 17:38.33 | *** join/#debian factor (~factor@ip70-185-223-172.ok.ok.cox.net) |
| 17:39.00 | garn32 | jelly: that link should be correct |
| 17:39.09 | jelly | garn32: oh, you're using the closed nvidia driver. This is normal then, it often screws up text mode. |
| 17:39.26 | *** join/#debian bp0 (~bp@unaffiliated/bp0) |
| 17:39.29 | garn32 | jelly: does noveau actually fix this issue? |
| 17:39.59 | *** join/#debian b (~glen@unaffiliated/ridout) |
| 17:40.24 | jelly | garn32: yes, but whether nouveau works with your card well enough is another question |
| 17:40.39 | jelly | garn32: I'd say forget about text console, keep using X |
| 17:40.58 | *** join/#debian timahvo1 (~rogue@197.237.131.64) |
| 17:41.06 | garn32 | jelly: I did some looking for my card already, and it basically halves the performance, plus I need the CUDA stuff so not an option |
| 17:41.17 | garn32 | jelly: thanks for the help |
| 17:41.22 | garn32 | awal1: thanks for the help |
| 17:42.03 | awal1 | garn32, I haven't been utile , but, np :) |
| 17:42.16 | *** join/#debian RL (~reilly@OTWAON1140W-LP140-03-1176332979.dsl.bell.ca) |
| 17:42.28 | jelly | I have the same symptom when using nvidia driver, on a DVI monitor, however my GT720 works well enough with recent nouveau |
| 17:43.08 | garn32 | jelly: CUDA is the cinch for me |
| 17:43.57 | *** join/#debian davidkart (~bbear@LFbn-1-3336-222.w90-127.abo.wanadoo.fr) |
| 17:44.19 | T4ng10r | hi |
| 17:45.02 | T4ng10r | how can I track application calls to system? I mean I/O operation, system calls, etc |
| 17:45.21 | T4ng10r | ie - track_command_app application_to_track |
| 17:46.02 | *** join/#debian msteinberg (~msteinber@c-73-237-162-150.hsd1.ga.comcast.net) |
| 17:47.43 | *** join/#debian murfjr (~douseiais@185.21.216.185) |
| 17:47.44 | petemc | T4ng10r: strace |
| 17:47.45 | debidi | T4ng10r: strace ? |
| 17:48.31 | *** join/#debian Iruoy (~Iruoy@ip211-144-172-82.adsl2.static.versatel.nl) |
| 17:48.42 | *** join/#debian davi (~davi@gnu/davi) |
| 17:49.52 | *** join/#debian oish (~charlie@159.22.169.217.in-addr.arpa) |
| 17:50.18 | *** join/#debian timahvo1 (~rogue@197.237.131.64) |
| 17:50.57 | *** join/#debian Brigo (~Brigo@164.11.60.178.dynamic.reverse-mundo-r.com) |
| 17:51.44 | *** join/#debian ShapeShifter499 (~ShapeShif@unaffiliated/shapeshifter499) |
| 17:51.45 | *** join/#debian mazert (~mazert@ANice-653-1-415-160.w86-193.abo.wanadoo.fr) |
| 17:52.51 | *** join/#debian pavlushka (~Pavel@unaffiliated/pavlushka) |
| 17:52.58 | *** part/#debian wulllst (~msi@dslb-088-073-173-232.088.073.pools.vodafone-ip.de) |
| 17:53.44 | *** join/#debian andril (~andril@97.68.237.19) |
| 17:53.55 | *** join/#debian Sue (~sue@2601:204:c600:ff32:6600:6aff:fe4e:4542) |
| 17:53.59 | *** join/#debian Sue (~sue@unaffiliated/sue) |
| 17:54.11 | *** join/#debian aldo (~lennycz@225.218.broadband2.iol.cz) |
| 17:54.28 | *** join/#debian klow (~textual@c-98-247-49-57.hsd1.wa.comcast.net) |
| 17:54.48 | *** join/#debian sm4sh (~smash@ip4-83-240-63-212.cust.nbox.cz) |
| 17:55.35 | *** join/#debian bn` (~Patrice@ip5f59e129.dynamic.kabel-deutschland.de) |
| 17:57.21 | *** join/#debian pavlushka_ (~Pavel@unaffiliated/pavlushka) |
| 17:57.37 | *** join/#debian melvin (~melvin@c-73-154-77-46.hsd1.pa.comcast.net) |
| 17:58.53 | *** join/#debian b (~glen@unaffiliated/ridout) |
| 17:59.37 | *** join/#debian Eduard_Munteanu (~Eduard_Mu@82.77.166.229) |
| 18:00.15 | *** join/#debian bluenemo (~bluenemo@unaffiliated/bluenemo) |
| 18:00.48 | *** join/#debian Putti (~Putti@x5ce19877.dyn.telefonica.de) |
| 18:01.22 | Putti | Is there any free driver alternative to this package: firmware-iwlwifi ? |
| 18:01.47 | *** join/#debian Devastator_ (~devas@186.214.78.118) |
| 18:01.51 | *** join/#debian rocksteady (~tyfoo@ip4d166781.dynamic.kabel-deutschland.de) |
| 18:01.53 | *** join/#debian Devastator_ (~devas@unaffiliated/devastator) |
| 18:02.10 | jelly | Putti: no, not really |
| 18:02.12 | *** join/#debian lsv_ (~nn@CPE84948c2eddc1-CM84948c2eddc0.cpe.net.cable.rogers.com) |
| 18:02.27 | Putti | I see that a module called iwlwifi is loaded on my debian sid install, but it doesn't enable wifi for me |
| 18:02.54 | Putti | jelly, can I get the wifi working with that module which is already loaded? |
| 18:03.09 | Putti | jelly, in Fedora 24 they got it somehow working with free software |
| 18:03.34 | jelly | Putti: did they, or did they just ship some of the firmware with the driver |
| 18:04.12 | Putti | jelly, I think Fedora doesn't ship any non-free software by default. |
| 18:04.49 | jelly | their definition of "free software" may differ from DFSG |
| 18:05.17 | Putti | oh, I see. hmm, what will I do now :D |
| 18:05.37 | *** join/#debian QORRiE (~dorian@unaffiliated/schaap137) |
| 18:05.39 | *** join/#debian lasdam (john@gateway/vpn/mullvad/x-welyqrigknddclei) |
| 18:05.40 | *** join/#debian lasdam (john@unaffiliated/lasdam) |
| 18:05.40 | *** join/#debian lasdam (john@gateway/vpn/mullvad/x-welyqrigknddclei) |
| 18:05.44 | *** join/#debian fearnothing (~nothing@unaffiliated/fearnothing) |
| 18:05.57 | jelly | a) buy a wifi card that has free drivers b) get the firmware necessary to make your wifi card work |
| 18:06.05 | jelly | c) find an ethernet cable |
| 18:06.22 | jelly | !debian-next |
| 18:06.22 | dpkg | #debian-next is the channel for testing/unstable support on the OFTC network (irc.oftc.net), *not* on Freenode. If you get "Cannot join #debian-next (Channel is invite only)." it means you did not read it's on irc.oftc.net. |
| 18:06.23 | *** join/#debian antgel (~topdog@77.124.118.170) |
| 18:06.33 | Putti | jelly, running on ethernet cable atm, but I think this card should have free drivers |
| 18:06.37 | *** join/#debian Qann (~Nomad@unaffiliated/qann) |
| 18:06.48 | cra1g321 | telling us the card/chipset would maybe help |
| 18:06.59 | jelly | as a sid user you should probably know where to check for and report bugs, if there are any. |
| 18:07.07 | teraflops | "I think" and "should have" ^ |
| 18:07.38 | *** join/#debian msteinberg (~msteinber@c-50-155-71-220.hsd1.ga.comcast.net) |
| 18:07.40 | *** join/#debian js9600 (~Thunderbi@87-57-20-106-dynamic.dk.customer.tdc.net) |
| 18:07.52 | Putti | cra1g321, I try to find the model somehow, a minute. |
| 18:08.01 | *** mode/#debian [+l 1661] by debhelper |
| 18:08.08 | jelly | cra1g321: does it really matter, no iwlwifi hw works without firmware (afaik) |
| 18:08.25 | *** join/#debian controll (~a@233.94.223.87.dynamic.jazztel.es) |
| 18:09.08 | *** join/#debian AngeFede (~f3d3@2a01:e34:ee83:bd10:d48d:1664:d74b:dd56) |
| 18:09.09 | *** join/#debian easyshekels (~easysheke@bzq-109-67-218-206.red.bezeqint.net) |
| 18:09.10 | Putti | cra1g321, it is Intel Corporation Wireless 8260 |
| 18:09.25 | cra1g321 | if only there was a helpful wiki page... |
| 18:09.28 | cra1g321 | oh look https://wiki.debian.org/iwlwifi |
| 18:09.49 | *** join/#debian Liberium_ (~Liberium@205-154-190-109.dsl.ovh.fr) |
| 18:10.04 | *** join/#debian happy-dude (uid62780@gateway/web/irccloud.com/x-ugzzjcvondxlttln) |
| 18:10.20 | cra1g321 | 8260 is listed in the "supported devices" |
| 18:10.36 | Putti | "Non-free firmware is required" :( |
| 18:11.07 | *** join/#debian lasdam (john@gateway/vpn/mullvad/x-opwytsoivmtrhegk) |
| 18:11.20 | cra1g321 | looking here https://packages.debian.org/jessie/firmware-iwlwifi |
| 18:11.30 | jelly | dpkg, tell Putti about non-free sources |
| 18:11.36 | cra1g321 | the contents doesn't list the 8260 for jessie package, but it does for jessie-backports |
| 18:11.47 | jelly | Putti is apparently on sid. |
| 18:11.50 | Putti | I don't want to use non-free |
| 18:11.54 | Putti | yes I am |
| 18:12.02 | *** join/#debian lasdam (john@gateway/vpn/mullvad/x-evspmekpmgpbuoiy) |
| 18:12.02 | *** join/#debian lasdam (john@unaffiliated/lasdam) |
| 18:12.02 | *** join/#debian lasdam (john@gateway/vpn/mullvad/x-evspmekpmgpbuoiy) |
| 18:12.13 | cra1g321 | well if you dont want to use non-free you won't be using that wifi chipset then it seems |
| 18:12.34 | jelly | that's options a) or c) yes. |
| 18:12.43 | Putti | going to shop now |
| 18:13.06 | jelly | investigate your hardware well before buying to run linux on |
| 18:13.21 | babilen | Putti: Your processor is likely to use some non-free microcode also |
| 18:13.24 | jelly | esp. if you care about DFSG |
| 18:13.33 | cra1g321 | babilen, lol don't start that... |
| 18:13.46 | babilen | cra1g321: It's true |
| 18:13.51 | babilen | dpkg: microcode |
| 18:13.51 | dpkg | Microcode are instructions/structures for implementing high-level machine code within processors. The Linux kernel can load updated microcode on most x86 processors. Microcode patches for Intel and AMD64 CPUs are packaged for Debian as intel-microcode and amd64-microcode respectively; installing the relevant package is recommended to ensure system stability. Ask me about <non-free sources>. http://wiki.debian.org/Microcode |
| 18:13.53 | Putti | babilen, yes, hopefully someday I will get a fully free system |
| 18:13.53 | jelly | babilen: the wired ethernet card too! Oh the humanity! |
| 18:14.02 | teraflops | heh |
| 18:14.23 | babilen | It's a shame, but it is *really* hard to get around non-free |
| 18:14.45 | cra1g321 | non-free honestly doesn't bother me, if it makes my hardware work then great, that's what i want |
| 18:14.48 | babilen | I kind of liked the idea of separating these "necessary evils" into a separate "firmware" suite |
| 18:14.48 | teraflops | s/hard/expensive |
| 18:15.32 | *** join/#debian kuldeep (~kuldeepdh@unaffiliated/kuldeepdhaka) |
| 18:17.35 | *** join/#debian sm4sh (~smash@ip4-83-240-63-212.cust.nbox.cz) |
| 18:18.00 | *** mode/#debian [+l 1655] by debhelper |
| 18:18.47 | *** join/#debian rainfyre (~rainfyre@white.dreamhost.com) |
| 18:19.31 | *** join/#debian LtL (~ltl@unaffiliated/ltl) |
| 18:19.50 | *** join/#debian bollocks_k (~bollocks@ip98-181-3-125.br.br.cox.net) |
| 18:20.16 | *** join/#debian Yukiteru (~Yukiteru@unaffiliated/yukiteru) |
| 18:21.16 | *** join/#debian canopus (~canopus@unaffiliated/pierrot) |
| 18:21.33 | *** join/#debian Caplain (~shayne@d14-69-122-103.try.wideopenwest.com) |
| 18:22.19 | poeticrpm | does anyone here have debian setup with luks using a keyfile on a USB drive? |
| 18:23.03 | poeticrpm | im hoping someone who has this setup can tell me what they have in /etc/initramfs-tools/modules |
| 18:23.25 | poeticrpm | because I cant seem to get debian to read the keyfile. |
| 18:23.48 | *** join/#debian sm4sh (~smash@ip4-83-240-63-212.cust.nbox.cz) |
| 18:23.54 | poeticrpm | or rather, get debians initramfs to read the usb drive and then the keyfile |
| 18:24.17 | *** join/#debian miskatonic (~miskatoni@ipbcc0cd88.dynamic.kabel-deutschland.de) |
| 18:24.53 | *** join/#debian tallbarr (~none@unaffiliated/tallbarr) |
| 18:25.38 | *** join/#debian lsv (~nn@CPE84948c2eddc1-CM84948c2eddc0.cpe.net.cable.rogers.com) |
| 18:26.49 | *** join/#debian finlstrm (~finlstrm@ip72-200-182-134.ri.ri.cox.net) |
| 18:33.08 | *** join/#debian Brigo (~Brigo@164.11.60.178.dynamic.reverse-mundo-r.com) |
| 18:33.26 | *** join/#debian dayten (~gnoid@85.26.186.29) |
| 18:33.55 | *** join/#debian amcorreia (~amcorreia@177.134.88.245) |
| 18:34.02 | *** join/#debian dtux (~dmtucker@2604:4080:115d:21:85ec:7691:ef8f:510d) |
| 18:35.45 | *** join/#debian earthundead (~earthunde@78.25.121.215) |
| 18:35.50 | *** join/#debian jadz (~UFCking1@63.245.67.54) |
| 18:36.05 | *** join/#debian wildlander (~wild@unaffiliated/wildlander) |
| 18:36.08 | *** join/#debian philipballew (~philip@ubuntu/member/philipballew) |
| 18:36.08 | *** join/#debian T4ng10r (~Tanglor@90-156-73-132.internetia.net.pl) |
| 18:36.43 | *** join/#debian zeemz (~zeemz@201.102.105.251) |
| 18:37.26 | *** join/#debian Dro (~Dro@unaffiliated/dro/x-1548038) |
| 18:37.29 | *** join/#debian pioiytr_ (~pioiytr@2601:246:8000:8380:50a4:6a7d:6303:4220) |
| 18:38.00 | *** mode/#debian [+l 1664] by debhelper |
| 18:38.22 | *** join/#debian hyfrehyfre (~hyfrehyfr@static-186-121-197-102.acelerate.net) |
| 18:39.11 | *** join/#debian macrobat (~beep@h-39-187.a328.priv.bahnhof.se) |
| 18:39.15 | *** join/#debian tadej (~universe@tadej.nl) |
| 18:41.48 | T4ng10r | Hi, |
| 18:42.26 | T4ng10r | I've installed some packet after which one of my apps start showing 'Vector smash protection is enabled" and doesn't show some of dialog windows |
| 18:42.30 | *** join/#debian asterismo_m (~asterismo@r179-29-184-42.dialup.mobile.ancel.net.uy) |
| 18:42.46 | T4ng10r | I don't know which packet triggered this behavior or how to solved it |
| 18:42.49 | T4ng10r | can you help me? |
| 18:43.34 | T4ng10r | previously this app worked clean and without problem |
| 18:44.45 | *** join/#debian Portable_Cheese (~Dani@24-151-37-213.dhcp.nwtn.ct.charter.com) |
| 18:45.31 | *** join/#debian plasmoduck (~cjg@103.251.66.37) |
| 18:45.35 | *** join/#debian tadej (~universe@unaffiliated/tadej) |
| 18:47.37 | *** join/#debian gnugr (~gnugr@unaffiliated/gnugr) |
| 18:48.05 | *** join/#debian IlNominePatre (~Discovery@109.235.52.5) |
| 18:48.30 | *** join/#debian Colti (Miramar-FL@unaffiliated/miramar-fl) |
| 18:48.57 | *** join/#debian _atomik (~Brad@d154-5-141-27.bchsia.telus.net) |
| 18:49.25 | *** join/#debian dionysus69 (~Icedove@unaffiliated/dionysus69) |
| 18:49.43 | *** join/#debian root-x (~root-x@unaffiliated/root-x) |
| 18:49.55 | *** join/#debian Levure (~quassel@188.62-244-81.adsl-dyn.isp.belgacom.be) |
| 18:50.33 | *** join/#debian asc232 (~Keith@179.38.163.199) |
| 18:50.35 | *** join/#debian Discovery (~Discovery@109.235.52.5) |
| 18:51.28 | jmcnaught | T4ng10r: what program are you having trouble with? |
| 18:51.46 | T4ng10r | TeamViz |
| 18:52.00 | davidkart | hi ppl. |
| 18:52.00 | *** join/#debian SilverWhitefish (~hidden@68-200-88-239.res.bhn.net) |
| 18:52.05 | davidkart | I'm trying to set up a squid server |
| 18:52.13 | davidkart | But that's not working that much |
| 18:52.14 | T4ng10r | from what I see - this is something wrote in Javascript in Titanium framwork |
| 18:52.22 | jmcnaught | T4ng10r: is that in Debian? You might need to ask upstream support |
| 18:52.38 | *** join/#debian mazert (~mazert@ANice-653-1-415-160.w86-193.abo.wanadoo.fr) |
| 18:53.12 | T4ng10r | puzzling is that TV reports this - as strace show it |
| 18:53.15 | davidkart | http://pastie.org/10902899 |
| 18:53.47 | T4ng10r | but in code I can't find anything - so it seam this OS is doing so |
| 18:54.22 | *** join/#debian Kurogane (~kuro@179.5.103.48) |
| 18:54.59 | Kurogane | Hi, debian 8 support Ed25519 SSH host keys? |
| 18:55.52 | *** join/#debian Quatroking_ (~Quatrokin@5070983A.static.ziggozakelijk.nl) |
| 18:55.55 | jmcnaught | Kurogane: yes |
| 18:56.32 | *** join/#debian __jwe__ (~jwe@host213-122-158-156.range213-122.btcentralplus.com) |
| 18:57.14 | *** join/#debian timahvo1 (~rogue@197.237.131.64) |
| 18:59.48 | *** join/#debian oish (~charlie@46.165.240.174) |
| 19:01.22 | *** part/#debian julius_ (~jason4@dslb-092-077-007-115.092.077.pools.vodafone-ip.de) |
| 19:01.54 | *** join/#debian ]3n19m4[_ (~]3n19m4@155.170.117.91.dynamic.reverse-mundo-r.com) |
| 19:01.56 | *** join/#debian lasdam (lasdam@gateway/vpn/mullvad/x-yinywpqtepqhzzgm) |
| 19:02.31 | jelly | T4ng10r: are you sure it's a package installation that introduced the behaviour? Can you create a fresh new user, log in as them and then try to run the same app? |
| 19:02.42 | *** join/#debian Kappa (~Kappa@ANancy-652-1-498-233.w92-148.abo.wanadoo.fr) |
| 19:03.18 | *** join/#debian rimdeker (~rimdeker@unaffiliated/rimdeker) |
| 19:03.28 | *** join/#debian easyshekels (~easysheke@bzq-109-67-218-206.red.bezeqint.net) |
| 19:03.33 | *** join/#debian tokage (308213@unaffiliated/tokage) |
| 19:04.23 | *** join/#debian _0bitcount (~Big_Byte@92.176.142.156) |
| 19:04.32 | *** join/#debian klow (~textual@c-98-247-49-57.hsd1.wa.comcast.net) |
| 19:04.53 | *** join/#debian Tom01 (~tom@p5DDFC411.dip0.t-ipconnect.de) |
| 19:06.16 | *** join/#debian lasdam (lasdam@gateway/vpn/mullvad/x-fwigfulfwahasujs) |
| 19:07.54 | *** part/#debian crafty1 (~crafty1@2601:98b:8201:3078:c5f0:19e7:f1fa:d275) |
| 19:08.18 | *** join/#debian julius_ (~jason4@dslb-092-077-007-115.092.077.pools.vodafone-ip.de) |
| 19:08.19 | julius_ | hi |
| 19:08.48 | julius_ | to be able to use wake on lan i added: iface eth0 inet dhcp ethernet-wol g to /etc/network/interfaces but now the interface does not come on after boot..why? |
| 19:09.40 | ZeuxBlack | is back from: $null - was away for: 2427wks 2days 18hrs 9mins 32secs |
| 19:09.57 | *** join/#debian _atomik (~Brad@104.200.154.10) |
| 19:12.39 | *** join/#debian gnugr_ (~gnugr@athedsl-96502.home.otenet.gr) |
| 19:12.47 | *** join/#debian Putti (~Putti@x5ce19877.dyn.telefonica.de) |
| 19:13.10 | *** join/#debian iik (~IIK@staticline-31-183-41-96.toya.net.pl) |
| 19:14.08 | *** join/#debian prototron (~prototron@cable-192.222.220.114.electronicbox.net) |
| 19:14.23 | *** join/#debian stoimenow (~stoimenow@212-5-158-16.ip.btc-net.bg) |
| 19:15.38 | *** join/#debian canopus (~canopus@unaffiliated/pierrot) |
| 19:16.53 | T4ng10r | jelly: good idea - i'll try it |
| 19:17.14 | *** join/#debian Spec (~Spec@unaffiliated/spec) |
| 19:17.53 | *** join/#debian astrofog (~astrofog@unaffiliated/astrofog) |
| 19:19.02 | Putti | Hi, again, so instead of the intel non-free wifi card I got realtek 8192cu wifi usb card. It connects fine to wifi and gets and ip but I cannot access any web pages. There was some problems in dmesg, log here: http://paste.debian.net/780002/ |
| 19:19.41 | *** join/#debian oish_ (~charlie@46.165.240.174) |
| 19:19.59 | *** join/#debian jackbrown (~se@unaffiliated/jackbrown) |
| 19:20.30 | *** join/#debian cra1g321 (~craig@5.80.165.228) |
| 19:21.16 | markybob | Putti: so you didn't install firmware-realtek? |
| 19:21.25 | Putti | no |
| 19:21.39 | markybob | Putti: so do it. and why do you keep asking sid questions in here? |
| 19:21.58 | *** join/#debian AndyBotwin (~Gustavo@unaffiliated/andybotwin) |
| 19:22.40 | Putti | markybob, oh yeah, forgot, I will go to the #debian-next. |
| 19:22.47 | *** join/#debian msteinberg (~msteinber@73.106.72.180) |
| 19:22.54 | Putti | markybob, but there should be free version available too |
| 19:23.05 | *** join/#debian L0aD1nG (~L0aD1nG@unaffiliated/l0ad1ng) |
| 19:23.06 | TomTomTosch | i don't think there is. |
| 19:23.09 | Putti | markybob, and looks like it works somehow but there is now some bug |
| 19:23.11 | markybob | i should be rich |
| 19:23.30 | *** join/#debian Ad1 (~adrian@aayb242.neoplus.adsl.tpnet.pl) |
| 19:24.07 | TomTomTosch | h-node says no. https://h-node.org/wifi/catalogue/en/1/1?search_string=rtl8192cu&submit=Search |
| 19:24.17 | *** join/#debian lesik (~lesik@p200300874F207B125EC5D4FFFEBBE8FB.dip0.t-ipconnect.de) |
| 19:24.56 | Putti | :/ |
| 19:25.10 | TomTomTosch | Putti: free does not mean gratis. there are gratis drivers but they are not free software. |
| 19:25.42 | Putti | yup, I was talking the whole time about libre firmware |
| 19:25.51 | *** join/#debian marcidy (~marcidy@unaffiliated/marcidy) |
| 19:27.52 | *** join/#debian Sdr24_ (~Sdr24@c-71-62-227-221.hsd1.va.comcast.net) |
| 19:28.06 | *** join/#debian cra1g321 (~craig@5.80.165.228) |
| 19:28.23 | *** join/#debian sebastianlutter (~sebastian@x4db3cfe4.dyn.telefonica.de) |
| 19:28.55 | Putti | Btw, what is this that I see in the dmesg: "Loading alternative firmware rtlwifi/rtl8192cufw.bin" ? |
| 19:29.09 | Putti | Is there some non-free firmware in debian? O.o |
| 19:30.32 | miskatonic | I use an ethernat-USB adapter in order to acess the internet |
| 19:31.05 | miskatonic | this way, I don't need that evil formware for my built-in realtek |
| 19:31.45 | TomTomTosch | Putti: that file '/lib/firmware/rtlwifi/rtl8192cufw.bin' can only be found in the non-free firmware-realtek. check if you have it. you will not if you never installed non-free stuff. |
| 19:31.52 | *** join/#debian msteinberg (~msteinber@45.56.148.212) |
| 19:32.31 | *** join/#debian babyblood (~GitGud@unaffiliated/gitgud) |
| 19:34.42 | *** join/#debian bogusdisk (~user@user-12hch0f.cable.mindspring.com) |
| 19:35.16 | *** join/#debian canopus (~canopus@unaffiliated/pierrot) |
| 19:35.37 | *** join/#debian diniwed (~gavron@ool-45746e24.dyn.optonline.net) |
| 19:35.51 | Putti | I gotta start studying how these wifi chips work so I could help developing a free replacement for these firmware files... |
| 19:36.10 | *** join/#debian sm00th (~sm00th@unaffiliated/sm00th) |
| 19:36.31 | TomTomTosch | that would be greately appreciated. good luck. |
| 19:37.31 | miskatonic | most of them would need to be reverse engineered as the vendors don't hand out documentation |
| 19:38.23 | Putti | yeah |
| 19:39.34 | markybob | good luck not getting sued to death also |
| 19:40.46 | *** join/#debian timahvo1 (~rogue@197.237.131.64) |
| 19:40.54 | *** join/#debian hggdh (~hggdh@ubuntu/member/hggdh) |
| 19:41.23 | *** join/#debian CHCl3 (~CHCl3@95.61.147.160) |
| 19:42.09 | *** join/#debian blueness (~blueness@gentoo/developer/blueness) |
| 19:45.37 | *** join/#debian lsv_ (~nn@CPE84948c2eddc1-CM84948c2eddc0.cpe.net.cable.rogers.com) |
| 19:46.17 | *** join/#debian damentz (~damentz@cpe-70-122-17-194.austin.res.rr.com) |
| 19:46.17 | *** join/#debian d4rklit3 (~textual@cpe-76-90-191-36.socal.res.rr.com) |
| 19:46.49 | *** join/#debian sm4sh (~smash@ip4-83-240-63-212.cust.nbox.cz) |
| 19:46.58 | *** join/#debian canopus (~canopus@unaffiliated/pierrot) |
| 19:48.49 | *** join/#debian Bae (~GitGud@unaffiliated/gitgud) |
| 19:49.26 | *** join/#debian roshanavand (~roshanava@62.65.209.54.cable.starman.ee) |
| 19:50.11 | *** join/#debian xet7 (~xet7@line-10032.dyn.kponet.fi) |
| 19:50.42 | *** join/#debian philipballew (~philip@ubuntu/member/philipballew) |
| 19:50.56 | *** join/#debian robotroll (~robotroll@unaffiliated/robotroll) |
| 19:51.00 | *** join/#debian we6jbo2 (~we6jbo2@cpe-75-80-39-152.san.res.rr.com) |
| 19:53.05 | *** join/#debian sm4sh (~smash@ip4-83-240-63-212.cust.nbox.cz) |
| 19:54.00 | *** join/#debian h9 (Elite17198@ipv6.4.chi.elitebnc.org) |
| 19:54.06 | *** join/#debian towo` (~towo@unaffiliated/towo/x-4064351) |
| 19:55.10 | *** join/#debian klow (~textual@c-98-247-49-57.hsd1.wa.comcast.net) |
| 19:56.09 | *** join/#debian ]3n19m4[ (~]3n19m4@155.170.117.91.dynamic.reverse-mundo-r.com) |
| 19:57.10 | *** join/#debian __jwe__ (~jwe@host213-122-158-156.range213-122.btcentralplus.com) |
| 19:57.36 | *** join/#debian gnugr (~gnugr@unaffiliated/gnugr) |
| 19:58.01 | *** mode/#debian [+l 1671] by debhelper |
| 19:58.04 | *** join/#debian sm4sh (~smash@ip4-83-240-63-212.cust.nbox.cz) |
| 19:59.20 | *** join/#debian vmod__ (~vmod@120.60.130.146) |
| 20:00.44 | *** join/#debian Aorious (~prakash@cpc99624-brnt2-2-0-cust523.4-2.cable.virginm.net) |
| 20:01.00 | *** join/#debian oish (~charlie@46.165.240.174) |
| 20:02.29 | *** part/#debian __jwe__ (~jwe@host213-122-158-156.range213-122.btcentralplus.com) |
| 20:02.38 | *** join/#debian Eduard_Munteanu (~Eduard_Mu@5-12-133-237.residential.rdsnet.ro) |
| 20:03.14 | *** join/#debian roshanavand (~roshanava@62.65.209.54.cable.starman.ee) |
| 20:05.11 | *** join/#debian civillian (~nick@174.202.49.122-static.velocitynet.com.au) |
| 20:05.36 | *** join/#debian navlys (~smuxi@87-231-23-206.rev.numericable.fr) |
| 20:07.00 | *** join/#debian LaptopBrain (brain@2001:470:1f09:d7d:c8f3:1445:3734:5a22) |
| 20:08.11 | *** join/#debian lukaso666 (~lukaso666@andr-h4.satkol.pl) |
| 20:08.22 | *** join/#debian nokt (~nokt@181.46.158.157) |
| 20:08.55 | *** join/#debian WifiBrain (brain@cortex.brainbox.cc) |
| 20:10.33 | *** join/#debian aldo (~lennycz@225.218.broadband2.iol.cz) |
| 20:10.56 | *** join/#debian pioiytr_ (~pioiytr@2601:246:8000:8380:50a4:6a7d:6303:4220) |
| 20:10.56 | plasmoduck | if mplayer can play movies in console uring fb, why can't we have a console web browser that can display images using fb? |
| 20:11.26 | plasmoduck | or is there? |
| 20:12.08 | plasmoduck | Ah NetSurf |
| 20:12.25 | petemc | w3m as wel |
| 20:12.57 | *** join/#debian jackian (~jackian@host213-122-158-156.range213-122.btcentralplus.com) |
| 20:14.02 | jhutchins | plasmoduck: Yeah, there have been several, all require some work. |
| 20:14.03 | *** join/#debian msteinberg (~msteinber@45.56.148.237) |
| 20:14.20 | *** join/#debian iWaldo (iWaldo___@unaffiliated/iwaldo) |
| 20:14.24 | plasmoduck | thats pretty neat |
| 20:14.30 | plasmoduck | I have no need for X now :) |
| 20:14.54 | *** join/#debian benkard (~benkard@2001:a61:15a:fb01:10c4:40c:1d92:7bee) |
| 20:15.14 | teraflops | ^ |
| 20:15.36 | *** join/#debian Shentino (~Shentino@gentoo/contributor/shentino) |
| 20:16.04 | jhutchins | plasmoduck: No personal expericence, but framebuffer has been criticised as being extremely slow despite it's simplicity. |
| 20:16.37 | plasmoduck | jhutchins, noted. |
| 20:16.51 | plasmoduck | how can I show tux in my console with fbdev? |
| 20:17.03 | plasmoduck | like representing cpu cores like gentoo |
| 20:18.06 | plasmoduck | jhutchins, There is now a library DirectFB which provides a framework for hardware acceleration of the Linux framebuffer. |
| 20:18.49 | *** join/#debian d4rklit3 (~textual@cpe-76-90-191-36.socal.res.rr.com) |
| 20:20.43 | *** join/#debian oish_ (~charlie@linux-frankfurt.cryptostorm.net) |
| 20:20.51 | teraflops | mover does hw cceleration via egl |
| 20:20.55 | teraflops | mpv |
| 20:22.05 | davidkart | can someone help me for a good proxy ? |
| 20:22.30 | TomTomTosch | a good proxy is one you pay for. |
| 20:24.01 | *** join/#debian jackian (~jackian@host213-122-158-156.range213-122.btcentralplus.com) |
| 20:24.17 | *** join/#debian jackbrown (~se@unaffiliated/jackbrown) |
| 20:25.34 | *** join/#debian moozer (~moz@5cf3f715.rev.dansknet.dk) |
| 20:25.36 | *** join/#debian RebelCoder (~jurisl85@cpc74579-lewi13-2-0-cust201.2-4.cable.virginm.net) |
| 20:25.50 | *** join/#debian oish (~charlie@linux-frankfurt.cryptostorm.net) |
| 20:26.16 | davidkart | I want to run a web proxy on my vpn |
| 20:26.21 | davidkart | (i mean my vps debian) |
| 20:26.29 | davidkart | I tried squid but : error on the box |
| 20:26.38 | davidkart | I want to go with something else, with authentication please. |
| 20:27.50 | jhutchins | davidkart: I would suggest that you work out the error on squid first, even if it's not what you end up with. |
| 20:28.01 | jhutchins | davidkart: squid is fairly well known and documented. |
| 20:28.31 | davidkart | jhutchins: http://pastie.org/10902899 <-- error with squid |
| 20:28.46 | *** join/#debian CapsAdmin (~CapsAdmin@ti0115a400-1989.bb.online.no) |
| 20:28.49 | davidkart | Squid is well documented but when I point my browser to it, it is not working |
| 20:29.44 | jhutchins | davidkart: So you have something set up wrong, figure it out and you'll be that much further ahead if you try something else. |
| 20:29.51 | *** join/#debian bemawi (~bemawi@2a01:e35:8b48:4200:6137:bf79:32a2:58f1) |
| 20:29.54 | davidkart | I do http://myvpnadress.eu:3128 and I got this error message. |
| 20:31.21 | *** join/#debian oish_ (~charlie@46.165.240.174) |
| 20:31.26 | jhutchins | !squid |
| 20:31.26 | dpkg | Squid is a caching web proxy supporting HTTP/S, FTP and others. Debian's squid packages are not built with SSL support (Debian bug #180886), ask about <package rebuild> and supply "--enable-ssl" for this. See also <squid deb caching>, <transparent proxy>. /usr/share/doc/squid{,3}/* http://wiki.squid-cache.org/SquidFaq http://squid-cache.org/ #squid on irc.freenode.net. |
| 20:31.31 | *** join/#debian shtrb (~shtrb@unaffiliated/shtrb) |
| 20:31.55 | *** join/#debian suexec (~suexec@2001:16d8:ee92:9afa:47d0:3070:4883:d95e) |
| 20:32.31 | *** join/#debian Kruppt (~Kirk_Krup@104.169.32.8) |
| 20:33.08 | shtrb | Is anyone with FF (45.1 and up) can pass the OWA login (on debian , on windows works without any problem) , checked with konqueror works without problem (FF seems to be stuck in a login loop even with a brand new user) ? |
| 20:33.16 | shtrb | *owa office 365 login |
| 20:33.44 | *** join/#debian m5w_ (~matthew@2600:1004:b001:3577:1879:5fc6:ae58:77dd) |
| 20:34.02 | *** join/#debian Shentino (~Shentino@gentoo/contributor/shentino) |
| 20:34.02 | *** join/#debian cypherman (~santiago@179.26.149.100) |
| 20:34.08 | davidkart | it makes me cringe sorry to late in the game |
| 20:34.24 | *** join/#debian iiaann (~ian@cpc76508-clyd5-2-0-cust137.14-1.cable.virginm.net) |
| 20:35.43 | *** join/#debian cra1g321 (~cra1g321@104.131.33.224) |
| 20:35.53 | *** join/#debian manjaroCinnamon1 (~Manjarous@host-92-25-204-84.as13285.net) |
| 20:36.32 | *** join/#debian AirPlanes (~ShortBob@bzq-79-183-44-63.red.bezeqint.net) |
| 20:37.46 | m5w_ | Hello. I am trying to install debian on my laptop. I have done netinst several times in the past, so I booted to a USB with 8.4 netinst. While it boots to grub without any issues, I cannot procede any further. I have a GeForce 940M and have used debian with nvidia cards before, so I added nomodeset as a parameter and noquiet so I could see what was going on. It shows something about EDD and then goes to a black screen with a flashing |
| 20:39.03 | *** join/#debian p3rror (~p3rror@ec2-52-88-62-26.us-west-2.compute.amazonaws.com) |
| 20:39.08 | *** join/#debian oish (~charlie@linux-frankfurt.cryptostorm.net) |
| 20:40.03 | *** join/#debian klow (~textual@c-98-247-49-57.hsd1.wa.comcast.net) |
| 20:42.20 | *** join/#debian chalcedony (~chalcedon@unaffiliated/chalcedony) |
| 20:44.39 | *** join/#debian oish_ (~charlie@46.165.240.174) |
| 20:44.50 | m5w_ | I also tried booting to gparted live, as I wanted to do some partitioning. It complained about BAR 6 failing to assign memory and spit out a bunch of messages about PCI |
| 20:45.32 | jhutchins | m5w_: Sounds a lot like bad RAM. Reseat. |
| 20:47.25 | *** join/#debian sm4sh (~smash@ip4-83-240-63-212.cust.nbox.cz) |
| 20:47.38 | Aorious | Hi, I am attempting to create a "simple" backport of libvirt0, from stretch to jessie, using the guide on the Debian wiki. However, when I run 'dpkg-buildpackage', it displays missing dependencies. Here is the output of mk-build-deps, https://paste.debian.net/hidden/aa86f22c/. Were did I go wrong? |
| 20:49.04 | m5w_ | jhutchins: interesting; it runs Win 10 just fine. I'll see if I can get MemTest to run |
| 20:49.35 | markybob | ,checkbackport libvirt0 |
| 20:49.36 | judd | Backporting package libvirt0 in sidâjessie/amd64: unsatisfiable build dependencies: Build-Depends: libxml2-dev (>= 2.9.2+really2.9.1+dfsg1-0.2). |
| 20:49.39 | markybob | good luck |
| 20:50.03 | Putti | hi m5w_ ! :D |
| 20:50.15 | m5w_ | hey Putti |
| 20:50.17 | *** join/#debian imr (imr@gateway/shell/elitebnc/x-ncntkrrfwuqktdty) |
| 20:50.24 | *** part/#debian shtrb (~shtrb@unaffiliated/shtrb) |
| 20:50.59 | *** join/#debian inex (~inex@unaffiliated/inex) |
| 20:51.15 | *** join/#debian moetunes (~Jean-luc@203.194.53.243) |
| 20:52.57 | *** join/#debian rimdeker (~rimdeker@unaffiliated/rimdeker) |
| 20:53.23 | Aorious | markybob, I do not understand, ",checkbackport libvirt0". Check the jessie-backports repo? An offical backport does not exist. |
| 20:53.45 | *** join/#debian sm4sh (~smash@ip4-83-240-63-212.cust.nbox.cz) |
| 20:54.05 | TomTomTosch | >> /msg judd help checkbackport |
| 20:54.10 | markybob | Aorious: that's the bot telling you ssb won't work. jessie just doesn't have the depends |
| 20:54.14 | *** join/#debian nikoma (~nikoma@95.82.135.178) |
| 20:55.58 | *** join/#debian patterson (~patterson@73.93.142.234) |
| 20:56.27 | Aorious | markybob, Okay. Are there any alternatives? I understand "apt pinning" is something that can be used, but is not recommended. |
| 20:56.58 | *** join/#debian Specialist (~tg@2001:4dd0:fe44:0:2ad2:44ff:feaf:fa74) |
| 20:57.57 | babilen | judd: checkbackport libxml2-dev |
| 20:57.58 | judd | Backporting package libxml2-dev in sidâjessie/amd64: all build-dependencies satisfied using jessie. |
| 20:58.08 | babilen | Aorious: You could backport libxml2-dev first |
| 20:58.17 | *** join/#debian dreamon (~dreamon@unaffiliated/dreamon) |
| 21:00.04 | *** join/#debian sm4sh (~smash@ip4-83-240-63-212.cust.nbox.cz) |
| 21:00.21 | *** join/#debian dtux (~dmtucker@2604:4080:115d:21:644b:52e1:9ada:1092) |
| 21:00.23 | Aorious | babilen, Okay thanks! |
| 21:00.47 | jmcnaught | Aorious: do you need a new feature available only in the newer libvirt? If you can make it work with the libvirt in jessie you'll have a lot less ongoing maintenance to do |
| 21:00.51 | *** join/#debian klow (~textual@c-98-247-49-57.hsd1.wa.comcast.net) |
| 21:01.38 | Aorious | However, there were many other unmet dependencies. https://paste.debian.net/780039/ How do I use mk-build-deps to get these? |
| 21:02.29 | Aorious | jmcnaught: Yes, I need a specific bug fix, I believe could be avalible in the new version. |
| 21:02.56 | jmcnaught | Aorious: did you use "apt-get build-dep" on the package? What is the bug? |
| 21:03.07 | *** join/#debian lsv (~nn@CPE84948c2eddc1-CM84948c2eddc0.cpe.net.cable.rogers.com) |
| 21:03.57 | markybob | what will build-dep possibly do when it's not satisfiable? judd doesn't just lie :P |
| 21:04.45 | Aorious | jmcnaught, No I did not, I was merely following the wiki SimpleBackportCreation guide. I will do it now. This is the bug, https://bugzilla.redhat.com/show_bug.cgi?id=1147584 |
| 21:05.17 | babilen | You'll habe to have access to jessie-backports |
| 21:05.27 | Aorious | markybob: I think we understand that there is one that is not satisfiable. However, I was asking about all the other deps that are unmet. |
| 21:05.43 | *** join/#debian kunaaljain______ (~kunaaljai@122.167.124.238) |
| 21:06.07 | markybob | that bug was fixed in 1.2.8. jessie has 1.2.9 |
| 21:06.10 | markybob | so... |
| 21:06.21 | *** join/#debian imr (imr@unaffiliated/imr) |
| 21:06.21 | *** join/#debian imr (imr@gateway/shell/elitebnc/x-ncntkrrfwuqktdty) |
| 21:06.40 | *** join/#debian RebelCoder (~jurisl85@cpc74579-lewi13-2-0-cust201.2-4.cable.virginm.net) |
| 21:08.00 | *** mode/#debian [+l 1664] by debhelper |
| 21:09.20 | *** join/#debian shad0VV (~shad0VV@130.43.58.141.dsl.dyn.forthnet.gr) |
| 21:09.35 | *** join/#debian anton02 (~quassel@lal1651212.lnk.telstra.net) |
| 21:09.52 | Aorious | markybob, Okay. I guess I have other problems I will need to research. |
| 21:11.15 | jmcnaught | that bug is fixed in libvirt-1.2.8-5.el7 in redhat, but they could have backported a fix. I couldn't see a similar bug on the Debian BTS for the libvirt source package |
| 21:13.24 | *** join/#debian xet7 (~xet7@line-10032.dyn.kponet.fi) |
| 21:13.30 | *** join/#debian LtL (~ltl@unaffiliated/ltl) |
| 21:13.56 | m5w_ | jhutchins: starting memtest now |
| 21:15.35 | *** join/#debian stenofilen (~stenofile@c-447f71d5.02-101-6c756e10.cust.bredbandsbolaget.se) |
| 21:15.50 | *** join/#debian jak2000 (~jak2000@189.244.142.161) |
| 21:17.07 | *** join/#debian thunderrd_ (~thunderrd@119.42.85.50) |
| 21:18.24 | Aorious | jmcnaught, Unsure whether that means I should continue my efforts to backport libvirt0 from jessie to stretch. Out of interest, I ran 'apt-get build-dep', although 'dpkg-buildpackage' stills shows unmet dependencies (dh-apparmor libpolkit-gobject-1-dev xsltproc qemu-system-common), asides from the unsatisfiable libxml2-dev. For future reference, is this normal, or can I automate this with another command (apart from sudo |
| 21:18.26 | Aorious | apt-get install ...)? |
| 21:19.23 | Aorious | **Installing the unmet dependencies. |
| 21:19.29 | jmcnaught | Aorious: i thought that apt-get build-dep might help fetch build deps that can be satisfied. |
| 21:19.48 | *** join/#debian barajasfab (~barajasfa@2606:6000:6105:fc00:c078:a42b:1f11:cce9) |
| 21:20.16 | Aorious | Aorious, Okay, it did, for most but not all. |
| 21:20.41 | Aorious | jmcnaught, Okay, thanks. It did, for most but not all. |
| 21:20.44 | jmcnaught | Aorious: personally i would look at whether the managedsave feature is worth this effort (which you'll need to repeat for security updates) |
| 21:21.15 | *** join/#debian finnpixel (~finnpixel@av-217-129-135-231.netvisao.pt) |
| 21:21.20 | *** join/#debian RebelCoder (~jurisl85@cpc74579-lewi13-2-0-cust201.2-4.cable.virginm.net) |
| 21:21.46 | jmcnaught | Aorious: if you can find the patch that fixes the bug you could also try rebuilding the jessie version with the patch |
| 21:23.49 | Aorious | jmcnaught, Thats seems safer. I will try that. |
| 21:24.44 | babilen | You will still have to maintain it in the future and rebuild it for every security release. Depending on your usecase that might not be advisable. |
| 21:26.10 | *** join/#debian aax (~xaa@11.51-65-87.adsl-dyn.isp.belgacom.be) |
| 21:27.32 | *** join/#debian pioiytr_ (~pioiytr@2601:246:8000:8380:50a4:6a7d:6303:4220) |
| 21:27.42 | Aorious | babilen, I will keep that in mind. |
| 21:28.56 | *** join/#debian roshanavand (~roshanava@62.65.209.54.cable.starman.ee) |
| 21:29.03 | *** join/#debian pioiytr_ (~pioiytr@2601:246:8000:8380:50a4:6a7d:6303:4220) |
| 21:29.13 | Aorious | In that case, I should just ask. Is there any other way to take and restore .qcow2 snapshots in debian stable, without the bugged virt-manager, libvirt (bugged with my specific cpu config). |
| 21:29.33 | *** join/#debian pioiytr_ (~pioiytr@2601:246:8000:8380:50a4:6a7d:6303:4220) |
| 21:30.30 | *** join/#debian f10 (~flo@2001:470:52af:1:1ccb:cffc:a7a5:787c) |
| 21:30.57 | *** join/#debian FierceDeityLink (~shayne@d14-69-122-103.try.wideopenwest.com) |
| 21:31.22 | *** join/#debian ChemTom (~unknown@108-93-34-231.lightspeed.cicril.sbcglobal.net) |
| 21:34.15 | *** join/#debian f10 (~flo@2001:470:52af:1:4107:d698:56db:e73e) |
| 21:35.47 | *** part/#debian mekeor (~quassel@2a02:8070:d293:ff00:c6d9:87ff:fe26:2947) |
| 21:35.58 | *** join/#debian mekeor (~quassel@2a02:8070:d293:ff00:c6d9:87ff:fe26:2947) |
| 21:36.04 | *** part/#debian mekeor (~quassel@2a02:8070:d293:ff00:c6d9:87ff:fe26:2947) |
| 21:36.53 | *** join/#debian koltrast (2fe98474@h77-53-57-114.cust.se.alltele.net) |
| 21:36.56 | *** join/#debian cdown_ (~cdown@82-132-231-226.dab.02.net) |
| 21:37.37 | *** join/#debian Anwarias (~quassel@xdsl-89-0-2-70.netcologne.de) |
| 21:39.08 | *** join/#debian xet7 (~xet7@line-10032.dyn.kponet.fi) |
| 21:41.17 | *** join/#debian r3m_ (~r3m@irssi/user/r3m) |
| 21:44.52 | *** join/#debian lucdalton (~lucdalton@host-2-100-166-217.as13285.net) |
| 21:47.20 | *** join/#debian Ricardo__ (~rick@unaffiliated/ricardo--/x-7903455) |
| 21:49.00 | *** join/#debian Strife89 (~quassel@adsl-98-80-195-110.mcn.bellsouth.net) |
| 21:50.06 | *** join/#debian roshanavand (~roshanava@62.65.209.54.cable.starman.ee) |
| 21:50.45 | *** join/#debian ScutulatIum (~scutulati@24.171.220.82) |
| 21:52.06 | *** join/#debian timahvo1 (~rogue@197.237.131.64) |
| 21:52.21 | *** join/#debian menace (~knorr@unaffiliated/menace) |
| 21:53.04 | *** join/#debian AirPlanes (~ShortBob@bzq-79-183-44-63.red.bezeqint.net) |
| 21:53.43 | *** join/#debian aaro (~aaro@unaffiliated/xyox/x-040147) |
| 21:55.51 | *** join/#debian juantelez (~juantelez@unaffiliated/juantelez) |
| 21:56.19 | *** join/#debian Portable_Cheese (~Dani@24-151-37-213.dhcp.nwtn.ct.charter.com) |
| 21:56.36 | *** join/#debian buu (~buu@75.108.219.77) |
| 21:56.47 | buu | Is there some way to make screen -Q work while inside a screen session? |
| 21:57.30 | Loeb | I need to set a process with the highest possible priority, realtime if possible. Do I need to compile a kernel for this? |
| 21:57.48 | *** join/#debian jb0 (~jb0@CPE0030488cfd6c-CM7cb21bc2bf32.cpe.net.cable.rogers.com) |
| 21:57.51 | Loeb | I've done some chrt commands and it says that the process is running with SCHED_FIFO and priority 99 right now |
| 21:59.27 | *** join/#debian dvs (~hibbard@cwv.teksavvy.com) |
| 22:00.23 | *** join/#debian iu0Aihoo (~Instantbi@free-03.protectednetgroup.com) |
| 22:03.46 | *** join/#debian jak2000 (~jak2000@189.244.142.161) |
| 22:05.30 | *** join/#debian a1batr0ss (~a1batr0ss@unaffiliated/a1batr0ss) |
| 22:06.06 | a1batr0ss | Hi I managed to get the sound working, but I cannot adjust the volume at all. How can I fix this? |
| 22:07.47 | *** join/#debian pioiytr_ (~pioiytr@2601:246:8000:8380:50a4:6a7d:6303:4220) |
| 22:08.58 | *** part/#debian buu (~buu@75.108.219.77) |
| 22:09.04 | *** join/#debian l0xas (~vIka@unaffiliated/l0xas) |
| 22:09.12 | *** join/#debian pioiytr_ (~pioiytr@2601:246:8000:8380:50a4:6a7d:6303:4220) |
| 22:09.15 | *** join/#debian atis (~atis@62.85.92.192) |
| 22:10.54 | *** join/#debian Pscion (~chatzilla@ip98-167-195-74.ph.ph.cox.net) |
| 22:11.30 | *** join/#debian TomasCZ (~TomasCZ@yes.tenlab.net) |
| 22:13.06 | RebelCoder | Guys, what is the best way to see mu NVidia driver version if I am running Bumblebee ? |
| 22:13.16 | armin | hi. i'm on a notebook where i only have 2 trackpad buttons i could use for pasting text, so i obviously don't have that fancy click-two-buttons-to-paste-thing in Xorg present, yet. could anyone get me going how to proceed? please forgive the fact i'm damn drunk, thank you. |
| 22:13.36 | *** join/#debian gmelis (~gmelis@ppp-2-84-11-91.home.otenet.gr) |
| 22:13.57 | *** join/#debian RippyDippy (~wpgriggs@2601:190:201:d360:1510:319a:5170:5198) |
| 22:14.00 | *** join/#debian roshanavand (~roshanava@62.65.209.54.cable.starman.ee) |
| 22:14.45 | armin | also i just had the funniest taxi ride of my life, with an ex software developer. |
| 22:15.01 | *** join/#debian ggate (~earth@c-69-181-81-48.hsd1.ca.comcast.net) |
| 22:15.07 | *** join/#debian msteinberg (~msteinber@45.56.148.237) |
| 22:15.45 | *** join/#debian ScutulatIum (~scutulati@24.171.220.82) |
| 22:16.14 | *** join/#debian trewe (~trewe@bl20-21-193.dsl.telepac.pt) |
| 22:16.31 | *** join/#debian FierceDeityLink (~shayne@d14-69-122-103.try.wideopenwest.com) |
| 22:19.02 | *** join/#debian FierceDeityLink (~shayne@d14-69-122-103.try.wideopenwest.com) |
| 22:19.11 | a1batr0ss | armin: what kind of conversation did you guys have in the taxi? :) |
| 22:20.29 | d3lphi | hi all. I did run a process that certainly required lots of memory, I know that because I tracked it while it was in action. The memory (24GB) were occupied totally, then swap was used also. After the process terminated the swap space is still in use (free -h shows that). Why is the swap not deleted? currently RAM is used 6/24GB but swap still fully occupied |
| 22:21.50 | *** join/#debian campeao (~unix@2001:1284:f006:743c:211:aff:fe08:186) |
| 22:23.00 | *** join/#debian dob1 (~federico@151.51.154.243) |
| 22:23.14 | dob1 | hi, is skylake processors supported by jessie kernel? |
| 22:23.20 | *** join/#debian Korolev (~Korolev@2601:586:c400:6ace:a909:7065:ed0d:116) |
| 22:23.20 | dob1 | *are |
| 22:23.25 | *** join/#debian docsnuggles (~who@p57A68841.dip0.t-ipconnect.de) |
| 22:23.41 | dvs | dob1, it works for me (i5-6500) |
| 22:23.43 | markybob | mostly. there's a power issue that jessie-backports kernel fixes |
| 22:25.31 | dob1 | but i can boot to install the system, right? i would like to buy DS67U from shuttle to use as debian server, and it has a skylake processor (celeron 3855U) |
| 22:25.36 | spacebug^ | d3lphi: I think that even though no process is actually using the memory, the kernel still has it claimed. In short, it's not in use |
| 22:25.43 | *** join/#debian mtn (~mtn@72.168.160.80) |
| 22:25.53 | d3lphi | spacebug^: how do I free the swap space? |
| 22:25.53 | markybob | dob1: yes |
| 22:26.32 | dob1 | markybob, thanks |
| 22:28.00 | *** mode/#debian [+l 1657] by debhelper |
| 22:29.00 | *** join/#debian dtux_ (~dmtucker@2604:4080:115d:21:edcd:eae5:6c89:d8de) |
| 22:29.04 | spacebug^ | d3lphi: if you do not want the swap then use swapoff |
| 22:29.31 | d3lphi | spacebug^: but I NEED it. I don't want to disable it at all, I just want to "free" it |
| 22:29.57 | spacebug^ | d3lphi: I think it is free |
| 22:31.31 | *** join/#debian jfdh (~jfdh@unaffiliated/jfdh) |
| 22:32.41 | *** join/#debian cdown_ (~cdown@82-132-231-226.dab.02.net) |
| 22:32.56 | spacebug^ | d3lphi: Though I might be wrong. You can however change some of the behavior http://askubuntu.com/questions/157793/why-is-swap-being-used-even-though-i-have-plenty-of-free-ram and http://unix.stackexchange.com/questions/123168/why-is-swap-used-when-a-lot-of-memory-is-still-free |
| 22:32.59 | d3lphi | spacebug^: definitely not, "free -h" proofs it |
| 22:34.07 | *** join/#debian Antimattercarp (~Carp@2601:49:c302:560:ecf1:2230:2afc:a917) |
| 22:34.07 | *** join/#debian Tetrazene (~Carp@2601:49:c302:560:ecf1:2230:2afc:a917) |
| 22:35.14 | spacebug^ | d3lphi: and if you read down on one of those site you see what I mean about "free" |
| 22:37.07 | *** join/#debian Velveeta_Chef (~Nope@24-151-37-213.dhcp.nwtn.ct.charter.com) |
| 22:37.07 | *** join/#debian Velveeta_Chef (~Nope@fsf/member/Velveeta-Chef) |
| 22:42.17 | *** join/#debian chinesesausage (~esr@201.175.174.12) |
| 22:43.00 | *** join/#debian ]3n19m4[ (~]3n19m4@155.170.117.91.dynamic.reverse-mundo-r.com) |
| 22:45.55 | *** join/#debian reubenabrams (~reubenabr@104.200.154.5) |
| 22:47.02 | *** join/#debian bertbob (~bertbob@reriding.dsl.xmission.com) |
| 22:48.16 | *** part/#debian jaggz (~jaggz@unaffiliated/jaggz) |
| 22:50.02 | *** join/#debian mtn (~kde@72.168.160.80) |
| 22:52.37 | d3lphi | spacebug^: "swapoff -a && swapon -a" did the job what I wanted to (=freeing the space) |
| 22:53.00 | *** join/#debian githogori (~githogori@c-73-70-12-67.hsd1.ca.comcast.net) |
| 22:53.04 | markybob | still doesn't mean it made any sense |
| 22:53.16 | *** join/#debian AirPlanes (~ShortBob@bzq-79-183-44-63.red.bezeqint.net) |
| 22:54.02 | markybob | ram/swap doesn't want to be free |
| 22:54.05 | *** join/#debian BWMerlin (~Thunderbi@142.45.233.220.static.exetel.com.au) |
| 22:54.54 | *** join/#debian amcorreia (~amcorreia@2804:7f5:280:f92::1) |
| 22:56.34 | spacebug^ | Yeah. If the data was in use, it now resides in RAM instead. If it was free but chached, then nothing happened. Since swap (file or partition) is fixed size, no more free space on drive was achived either |
| 22:57.21 | *** join/#debian RL (~reilly@OTWAON1140W-LP140-03-1176332979.dsl.bell.ca) |
| 22:58.01 | *** mode/#debian [+l 1647] by debhelper |
| 22:59.07 | *** join/#debian andykay (~AndyKay@unaffiliated/andykay) |
| 22:59.43 | *** join/#debian githogori (~githogori@c-73-70-12-67.hsd1.ca.comcast.net) |
| 23:00.02 | *** join/#debian binezap (~binezap@S0106602ad07e96a2.vc.shawcable.net) |
| 23:01.37 | *** join/#debian Scourje (uid63311@gateway/web/irccloud.com/x-vwjdqjzzioqhvqhq) |
| 23:01.42 | *** join/#debian aaro (~aaro@unaffiliated/xyox/x-040147) |
| 23:04.39 | *** join/#debian RL (~reilly@OTWAON1140W-LP140-03-1176332979.dsl.bell.ca) |
| 23:05.26 | *** join/#debian fernie (~jarkko@n6khtkbtay1acmkj-3.v6.elisa-mobile.fi) |
| 23:05.27 | *** join/#debian a1batr0ss (~a1batr0ss@unaffiliated/a1batr0ss) |
| 23:05.43 | *** part/#debian menace (~knorr@unaffiliated/menace) |
| 23:09.23 | *** join/#debian Korolev (~Korolev@2601:586:c403:a570:81c1:15e2:86f3:7d28) |
| 23:10.03 | *** join/#debian moitest (~yaaictest@ptr-178-51-115-149.dyn.mobistar.be) |
| 23:11.59 | *** join/#debian Caplain (~shayne@d14-69-122-103.try.wideopenwest.com) |
| 23:14.33 | *** join/#debian awal1 (~awal1@199.241.132.84) |
| 23:16.01 | *** join/#debian msteinberg (~msteinber@45.56.148.237) |
| 23:16.07 | *** join/#debian sm4sh (~smash@ip4-83-240-63-212.cust.nbox.cz) |
| 23:25.14 | *** join/#debian RL (~reilly@OTWAON1140W-LP140-03-1176332979.dsl.bell.ca) |
| 23:27.53 | *** join/#debian ska (~skatinolo@unaffiliated/ska) |
| 23:28.00 | *** mode/#debian [+l 1641] by debhelper |
| 23:28.52 | *** join/#debian timahvo1 (~rogue@197.237.131.64) |
| 23:29.45 | ska | On debian8, what is the easiest way to get Usb3-ethernet support? In backports, it jumps from 3.16 to 4.5 and 4.6 kernels. There is not 3.18 for example. |
| 23:29.57 | *** join/#debian f10 (~flo@2001:470:52af:1:4107:d698:56db:e73e) |
| 23:30.08 | *** join/#debian mastokley (~mastokley@174-24-236-86.tukw.qwest.net) |
| 23:30.25 | *** join/#debian lsv_ (~nn@CPE84948c2eddc1-CM84948c2eddc0.cpe.net.cable.rogers.com) |
| 23:30.53 | ska | What would be the minimal upgrade path? |
| 23:33.23 | *** join/#debian RL (~reilly@OTWAON1140W-LP140-03-1176332979.dsl.bell.ca) |
| 23:33.38 | *** join/#debian SpaceAce (~SpaceAce@124-150-92-152.dyn.iinet.net.au) |
| 23:34.07 | *** join/#debian SpaceAce (~SpaceAce@124-150-92-152.dyn.iinet.net.au) |
| 23:34.15 | *** join/#debian lsv (~nn@CPE84948c2eddc1-CM84948c2eddc0.cpe.net.cable.rogers.com) |
| 23:36.40 | *** join/#debian RickXy (~zncadmin@115.99.100.29) |
| 23:38.08 | *** join/#debian de-facto (~de-facto@unaffiliated/de-facto) |
| 23:38.43 | *** join/#debian f10 (~flo@2001:470:52af:1:99d2:11f6:d7e8:ae1d) |
| 23:39.10 | *** join/#debian lsv_ (~nn@CPE84948c2eddc1-CM84948c2eddc0.cpe.net.cable.rogers.com) |
| 23:42.40 | *** join/#debian lsv (~nn@CPE84948c2eddc1-CM84948c2eddc0.cpe.net.cable.rogers.com) |
| 23:46.42 | *** join/#debian sm4sh (~smash@ip4-83-240-63-212.cust.nbox.cz) |
| 23:49.15 | *** join/#debian WR47HANZ (~henbone@unaffiliated/wr47hanz) |
| 23:52.27 | ska | Should upgrade to 4.X kernel be considered safe? |
| 23:52.47 | *** join/#debian philipballew (~philip@ubuntu/member/philipballew) |
| 23:53.42 | *** join/#debian AirPlanes (~ShortBob@bzq-79-183-44-63.red.bezeqint.net) |
| 23:56.37 | *** join/#debian methyl (~methyl@c-24-14-150-227.hsd1.il.comcast.net) |
| 23:56.49 | *** join/#debian N3X15 (~Rob@2602:ae:18f0:5400:ed5b:2db0:2666:ebe3) |
| 23:58.01 | awal1 | ska, many people uses the last kernel version available in backports, you can try... |
| 23:58.33 | awal1 | ,v kernels |
| 23:58.34 | judd | No package named 'kernels' was found in amd64. |
| 23:58.59 | awal1 | ,v linux-image-amd64 |
| 23:59.00 | judd | Package: linux-image-amd64 on amd64 -- squeeze: 2.6.32+29; squeeze-backports: 3.2+46~bpo60+1; wheezy: 3.2+46; wheezy-backports: 3.16+63~bpo70+1; jessie: 3.16+63; jessie-backports: 4.6+74~bpo8+1; sid: 4.6+74; stretch: 4.6+74 |
| 23:59.32 | ska | judd: perhaps he meant linux-image |