| 00:00.17 | *** join/#debian e14 (~e14@2601:184:487f:ff30:c86b:ebd0:fe43:e5d3) |
| 00:00.38 | *** join/#debian Cabanossi (~Cabanossi@p57995CEB.dip0.t-ipconnect.de) |
| 00:01.45 | *** join/#debian deb (~MalConsej@201.164.204.192) |
| 00:01.46 | codebam | tharkun: the problem isn't that I can't get a lease, the problem is that networkmanager can't get a lease |
| 00:01.50 | *** join/#debian de-facto (~de-facto@gateway/tor-sasl/de-facto) |
| 00:02.30 | jmcnaught | codebam: it looks like the DHCP request is timing out. By the way with journalctl you can use "--since=-5min" for the last 5 minutes. So maybe if you disconnect/disable wifi, then connect again, then show us a shortened log past with only the most recent connection attempt in it |
| 00:02.44 | archifriend | I have a Brother Scanner (DCP-7065DN) on my network that used to work under Debian Stretch and stopped some months ago. gscan2pdf can no longer find the scanner. scanimage -L segfaults. I've followed the installation instructions (which indicate success) again to no avail. I've googled far and wide. Any ideas? |
| 00:02.46 | codebam | okay I can do that |
| 00:04.12 | *** join/#debian valdyn (~valdyn@host-88-217-143-53.customer.m-online.net) |
| 00:04.31 | jmcnaught | codebam: also look at/paste /etc/NetworkManager/system-connections/$NETWORK_NAME (note this will include WPA passwords if the connection is available to everybody). Maybe try making a copy of that file, then telling NM to forget that network, then try again? |
| 00:05.31 | *** join/#debian blitzed (~blitzed@cpe-75-80-44-59.san.res.rr.com) |
| 00:07.26 | codebam | jmcnaught: https://ptpb.pw/qrsj.txt |
| 00:07.33 | codebam | (sorry if that send twice) |
| 00:07.37 | codebam | *sent |
| 00:08.46 | codebam | also resolvconf is setting my dns to 127.0.0.1 every time I reconnect |
| 00:09.30 | *** part/#debian oty (~oty___@ARennes-651-1-135-175.w2-2.abo.wanadoo.fr) |
| 00:10.28 | *** join/#debian kdlsp (~k@37-46-168-202.customers.ownit.se) |
| 00:10.29 | jmcnaught | codebam: :P did you look at your paste? also NM uses dnsmasq as a forwarding resolver |
| 00:10.38 | tharkun | codebam: Sorry the first step is to check the other end of the line. Connections ar terrible down here sorry to be of no assistance. |
| 00:11.35 | codebam | jmcnaught: but it's commented out inside it's configuration. I had it enabled before, but it shouldn't be now |
| 00:12.12 | codebam | ohh sorry |
| 00:12.15 | codebam | I'll paste it |
| 00:12.23 | *** join/#debian friiq (freq@yenn.ulegend.net) |
| 00:12.38 | friiq | https://goo.gl/6Nh13J hoping i got it right this time |
| 00:14.09 | *** join/#debian GJdan (~dan@d75-157-130-131.bchsia.telus.net) |
| 00:14.17 | jmcnaught | !ops friiq link is spam |
| 00:14.17 | dpkg | Hydroxide, dondelelcaro, LoRez, RichiH, mentor, abrotman, Maulkin, stew, peterS, Myon, Ganneff, weasel, zobel, themill, babilen, SynrG, jm_, somiaj, jelly: jmcnaught complains about: friiq link is spam |
| 00:14.32 | friiq | :/ |
| 00:14.38 | *** join/#debian f10 (~flo@ip5b40643f.dynamic.kabel-deutschland.de) |
| 00:15.03 | friiq | fine i will ask in another chan |
| 00:15.07 | *** part/#debian friiq (freq@yenn.ulegend.net) |
| 00:16.35 | *** join/#debian deznuts (uid92154@gateway/web/irccloud.com/x-ztrrvudtfwsbhgqw) |
| 00:17.39 | *** join/#debian GDiaX (~gdiax@188.251.57.44) |
| 00:18.08 | *** join/#debian OS-28660 (~OS-28660@2602:306:3062:6fb0::49) |
| 00:18.09 | jmcnaught | codebam: my computer using NetworkManager is still on jessie, and does not use dnsmasq, its /etc/NetworkManager/NetworkManager.conf is identical to one on a stretch system (which has NM disabled) |
| 00:18.12 | OS-28660 | <PROTECTED> |
| 00:22.33 | *** join/#debian apt (~apt@rikers.org) |
| 00:22.33 | *** topic/#debian is Debian Stretch is here: /msg dpkg stretch ; /msg dpkg jessie->stretch; /msg dpkg install stretch | Oldstable: Debian Jessie /msg dpkg jessie ; /msg dpkg 8.8 | NO FLOOD: /msg dpkg paste | /msg bots NOT people | offtopic: #debian-offtopic | testing/unstable: #debian-next (irc.oftc.net) | chanlogs: /msg dpkg irclog |
| 00:23.02 | *** join/#debian ToBeCloud (uid51591@wikimedia/ToBeFree) |
| 00:24.06 | jmcnaught | pierrot: any third party package or repository could interfere with the upgrade. In my experience it's more important to make sure that third party repos are temporarily removed. There doesn't look like very much overlap between your list of external packages and package names provided by Debian so your risk may be low |
| 00:24.27 | *** join/#debian Countess_Bathory (~Tess@unaffiliated/bloodcountess) |
| 00:24.58 | nvz | codebam: http://paste.debian.net/974837/ |
| 00:25.14 | jmcnaught | codebam: i thought capturing the backscroll while disconnected was the point of ZNC. Anyways I asked you a while back to disconnect/disable wifi, then connect using NM and show "journalctl -u NetworkManager --since=-2min" and the paste that you shared was just a permission error |
| 00:25.48 | codebam | oh so that message never sent |
| 00:25.53 | codebam | I did a paste |
| 00:25.55 | codebam | https://ptpb.pw/95P7.txt |
| 00:26.11 | nvz | codebam: thats just last 2hrs of /laslog codebam |
| 00:26.21 | codebam | jmcnaught: yeah it is lol, I guess it couldn't tell that I disconnected though |
| 00:26.24 | codebam | nvz: thank you |
| 00:26.28 | nvz | np |
| 00:27.11 | codebam | what is dns set to in a default networkmanager configuration? |
| 00:27.19 | pierrot | jmcnaught: I have a folder /etc/apt/sources.list.d/ which content is: dropbox.list dropbox.list.save google-chrome.list google-chrome.list.save google-talkplugin.list google-talkplugin.list.save skype-stable.list skype-stable.list.save stebbins-handbrake-releases-jessie.list |
| 00:27.22 | *** join/#debian woyzeck_ (~woyzeck@2804:14c:f286:1070:2e1f:bc80:9205:4b38) |
| 00:27.51 | *** join/#debian colcha (~colcha@186-93-235-95.genericrev.cantv.net) |
| 00:27.52 | jmcnaught | pierrot: you could move all of those files somewhere else for now, or edit each one to comment out the repo lines |
| 00:28.03 | codebam | but other than that I haven't touched my networkmanager configuration. it was working fine before I started trying to get wpa_supplicant working |
| 00:28.25 | jmcnaught | codebam: this is default NetworkManager.conf on stretch: http://paste.debian.net/974838/ |
| 00:28.48 | codebam | okay, that's identical to mine other than my commented out dnsmasq line |
| 00:28.54 | pierrot | jmcnaught: so I move them to any other location... thanks. |
| 00:29.11 | pierrot | but it's enough to do so, or in addition should I remove that software as well? |
| 00:29.48 | jmcnaught | pierrot: if it were me i would probably try without removing any software, though i typically don't install very much from outside of Debian's repos |
| 00:30.17 | codebam | why is it failing to get a dhcp lease? |
| 00:30.21 | jmcnaught | pierrot: you have a backup right? ⺠|
| 00:30.24 | codebam | and why is my dns being reset |
| 00:30.29 | codebam | where can I look? |
| 00:30.32 | pierrot | Yes, I've done it |
| 00:30.37 | *** join/#debian diniwed (~gavron@ool-457f31af.dyn.optonline.net) |
| 00:30.49 | jmcnaught | pierrot: then you're already miles ahead of most people |
| 00:31.03 | jmcnaught | if you run into errors during the upgrade let us know |
| 00:31.07 | pierrot | or I've "made" it sounds more natural than "done" I think :P |
| 00:31.18 | pierrot | jmcnaught: heh |
| 00:33.22 | *** join/#debian josiasdv (~josias@cpe-72-181-110-203.satx.res.rr.com) |
| 00:33.40 | jmcnaught | codebam: you can watch "journalctl -f" on a terminal while you connect to the network using NM. Obviously it's verbose, but you can either watch it in screen to search the backscroll, or if you spot something use journalctl's filter options to find the message |
| 00:34.31 | codebam | hmm okay |
| 00:36.12 | jmcnaught | i would not be surprised to find that you have dnsmasq.service active if you've been experimenting |
| 00:38.07 | *** join/#debian peterbec` (~peterbeci@75-142-96-216.static.mtpk.ca.charter.com) |
| 00:40.56 | *** join/#debian ski (~ski@remote11.chalmers.se) |
| 00:42.49 | *** join/#debian donatas (~donatas@78-57-243-222.static.zebra.lt) |
| 00:45.42 | *** join/#debian Cabanossi (~Cabanossi@p57995CEB.dip0.t-ipconnect.de) |
| 00:46.23 | *** join/#debian transhuman_ (~transhuma@pool-71-174-169-34.bstnma.east.verizon.net) |
| 00:47.35 | *** join/#debian Sri_Designer (~Sir_Desig@wikipedia/mareklug) |
| 00:48.20 | *** join/#debian lanu (~Douglas@39.169.168.65) |
| 00:50.35 | mrr0butt | lol https://packages.debian.org/sid/kernel/linux-image-amd64 |
| 00:50.52 | mrr0butt | kernel pkg missing in sid? |
| 00:51.58 | *** join/#debian codebam_ (d83a2195@gateway/web/freenode/ip.216.58.33.149) |
| 00:52.08 | *** join/#debian patterson_ (~patterson@98.210.76.223) |
| 00:52.17 | *** join/#debian VlijmenFileer (~vlijmenfi@199.195.193.181) |
| 00:52.22 | codebam_ | the issue is with dhclient. it can't get a lease |
| 00:52.31 | codebam_ | I ran it manually, doesn't work at all |
| 00:52.59 | codebam_ | I haven't even touched it's config, how do I fix it? |
| 00:53.18 | *** join/#debian Adalid_Negro (~said@186.84.15.56) |
| 00:53.19 | jmcnaught | codebam: are you able to see the logs of the dhcp server? If it's a consumer router it might have a logs section |
| 00:53.24 | mrr0butt | codebam_ wireless? |
| 00:53.37 | codebam_ | yes |
| 00:54.01 | codebam_ | mrr0butt: ^ |
| 00:54.34 | codebam_ | I'm able to connect to it fine, dhclient just can't get a lease |
| 00:55.15 | mrr0butt | dhclient -r ; dhclient -v wlan0 |
| 00:56.29 | mrr0butt | you need to disable network-manager if connecting manualy |
| 00:56.59 | mrr0butt | boot with "net.ifnames=0" boot parameter could maybe help2 |
| 00:57.06 | *** join/#debian GJdan (~dan@gateway/vpn/privateinternetaccess/gjdan) |
| 00:58.15 | codebam_ | mrr0butt: https://ptpb.pw/QcPz.jpg |
| 00:58.28 | codebam_ | I can't paste, I don't have internet |
| 00:58.50 | *** join/#debian dayten (~gnoid@188.170.193.68) |
| 01:00.00 | jmcnaught | codebam: can you check the logs of the DHCP server somehow? |
| 01:00.42 | *** join/#debian L00thar__ (~L00thar@dhcp-bc-4d-fb-f0-7e-e1.cpe.sourcecable.net) |
| 01:00.49 | codebam_ | jmcnaught: no not really, and it's not an issue with the server. my phone can connect fine |
| 01:01.09 | jmcnaught | codebam_: for insight on why no DHCP offers are being made |
| 01:01.40 | codebam_ | I still can't, it's just a regular router and I don't have access to DHCP logs |
| 01:03.06 | codebam_ | it's obviously an issue with dhclient, because dhcpcd can get a lease just fine |
| 01:03.28 | codebam_ | or it could before I uninstalled it to make sure it wasn't causing any issues |
| 01:05.32 | mrr0butt | apt-get remove leaves the deb files in /var/cache/apt/archives/ so you can reinstall it without inet |
| 01:05.54 | codebam_ | okay fine, but that still doesn't fix my issue |
| 01:06.41 | codebam_ | what should I do? |
| 01:06.58 | mrr0butt | try boot with "net.ifnames=0" boot option |
| 01:07.17 | *** join/#debian feneco (uid135851@gateway/web/irccloud.com/x-jeiyvxrjtufhpdui) |
| 01:07.19 | codebam_ | it worked without that before |
| 01:07.30 | codebam_ | I'm not wasting my time |
| 01:08.01 | mrr0butt | never change a running system :D |
| 01:08.15 | codebam_ | hmm? |
| 01:08.22 | codebam_ | oh |
| 01:08.47 | jmcnaught | codebam_: the version of NM in stretch has a MAC address randomizer feature. Maybe try that? Also I have seen consumer routers with DHCP or system logs, so maybe take another look. Some of them also put limits on how many DHCP clients can have leases at one time. |
| 01:09.50 | *** join/#debian socomm (~socomm@47.41.211.76) |
| 01:09.59 | *** part/#debian socomm (~socomm@47.41.211.76) |
| 01:10.23 | codebam_ | I fixed it. sort of |
| 01:10.32 | codebam_ | like it got assigned an address |
| 01:10.50 | codebam_ | I had static DHCP enabled for my mac address |
| 01:10.53 | *** join/#debian Hyp3ri0n (~OtakuSenp@unaffiliated/otakusenpai) |
| 01:11.01 | *** join/#debian qncfj (~qncfj@ip70-188-147-36.ri.ri.cox.net) |
| 01:11.01 | codebam_ | although that was working before, so I'm not sure why it wouldn't now |
| 01:11.08 | codebam_ | but meh |
| 01:12.28 | jmcnaught | \o/ |
| 01:13.26 | codebam_ | why is dhclient not smart enough to allow the router to assign it it's own ip |
| 01:14.42 | jmcnaught | to me it sounds like the router was sometimes not responding with an offer |
| 01:14.51 | *** join/#debian Hyp3ri0n (~OtakuSenp@unaffiliated/otakusenpai) |
| 01:15.38 | codebam_ | oh hmm |
| 01:15.53 | codebam_ | it was responding with an offer when I used dhcpcd though |
| 01:16.08 | ozzloy | jmcnaught, nvz, i sent a response email to https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=867135 but i'm not seeing it show up |
| 01:18.17 | *** join/#debian sidetracking (~quassel@99-101-249-43.lightspeed.rcsntx.sbcglobal.net) |
| 01:18.19 | *** join/#debian pingfloyd (~pingfloyd@unaffiliated/pingfloyd) |
| 01:18.28 | ozzloy | oh there it is |
| 01:18.33 | ozzloy | i was just impatient |
| 01:19.57 | codebam_ | I can't do static DHCP now |
| 01:20.08 | codebam_ | that's really annoying |
| 01:20.14 | codebam_ | I want to know why |
| 01:23.34 | *** join/#debian spinbee (~spinbee@modemcable176.93-203-24.mc.videotron.ca) |
| 01:23.56 | *** join/#debian dirae (~rea@41.254.9.199) |
| 01:25.07 | *** join/#debian dvs (~hibbard@cwv.teksavvy.com) |
| 01:25.41 | dirae | Hi, when I look at my GPU in setting (debian stretch/gnome) I get that the used card is Intel (The cpu's card) not the GPU itself (AMD/ATI). How would I fix that? |
| 01:26.18 | codebam_ | when I manually assign it an address it works, the router shows it as connected on the IP I specified, but ping says network unreachable |
| 01:26.20 | pacha | dirae: have you installed the drivers? |
| 01:26.36 | *** part/#debian dax (~dax@gateway/tor-sasl/dax) |
| 01:26.52 | dirae | pacha: yes |
| 01:26.54 | dirae | the driver is amdgpu |
| 01:26.57 | codebam_ | and when I don't set it manually but set it inside the router, it won't take the address that the router offers |
| 01:27.26 | codebam_ | the only way to get it working is automatically assign |
| 01:27.37 | codebam_ | how do I fix it |
| 01:28.43 | *** join/#debian KindTwo (kindone@freenode/father-christmas/kindone) |
| 01:29.15 | pacha | dirae: run this: glxinfo|egrep "OpenGL vendor|OpenGL renderer" |
| 01:29.21 | *** join/#debian L3gacy (~L3gacy@2601:8d:502:4345:1dcc:6661:21e2:88a) |
| 01:29.40 | *** join/#debian erle (~erle@124-169-6-31.dyn.iinet.net.au) |
| 01:29.48 | *** join/#debian dirae (~rea@41.254.9.199) |
| 01:30.36 | *** join/#debian GJdan (~dan@d75-157-130-131.bchsia.telus.net) |
| 01:34.55 | *** join/#debian dirae (~rea@41.254.9.199) |
| 01:38.19 | *** join/#debian vjacob (~vjacob@82.103.135.167) |
| 01:39.01 | *** join/#debian electrikapricot (~electrika@70.44.214.8.res-cmts.flt4.ptd.net) |
| 01:39.13 | *** join/#debian fhdrin (~fhdrin@104.168.154.50) |
| 01:41.15 | *** join/#debian erre (~erre@unaffiliated/erre) |
| 01:41.24 | *** join/#debian donatas (~donatas@78-57-243-222.static.zebra.lt) |
| 01:41.52 | *** join/#debian OS-30315 (~OS-30315@host-176-37-62-101.la.net.ua) |
| 01:42.44 | *** join/#debian th0r (~th0r@65.131.231.48) |
| 01:43.14 | *** join/#debian LjL (~ljl@unaffiliated/ljl) |
| 01:44.16 | *** join/#debian citypw (~citypw@207.226.142.235) |
| 01:44.27 | *** join/#debian UngratefulLoliRe (~Ungratefu@187.36.218.206) |
| 01:44.38 | jmcnaught | dirae: do you have the firmware-amd-graphics package installed? |
| 01:45.13 | dirae | jmcnaught: yes it's installed |
| 01:45.22 | codebam_ | can I tell networkmanager to use dhcpcd instead of dhclient? |
| 01:46.50 | jmcnaught | dirae: did you see https://wiki.debian.org/AtiHowTo#Hybrid_Graphics this? |
| 01:48.47 | dirae | jmncaught: No, I'll try their solution! |
| 01:49.54 | *** join/#debian peterbec` (~peterbeci@75-142-96-216.static.mtpk.ca.charter.com) |
| 01:49.55 | *** join/#debian Sri_Designer (~Sir_Desig@wikipedia/mareklug) |
| 01:50.11 | dirae | I get: Could not find provider with name radeon? |
| 01:51.31 | dirae | The list of my providers:Provider 0: id: 0x75 cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 3 outputs: 3 associated providers: 0 name:modesetting |
| 01:51.31 | dirae | Provider 1: id: 0x4f cap: 0xd, Source Output, Source Offload, Sink Offload crtcs: 0 outputs: 0 associated providers: 0 name:TOPAZ @ pci:0000:01:00.0 |
| 01:52.08 | *** join/#debian sidmo (~ilven@p5B24EA74.dip0.t-ipconnect.de) |
| 01:53.47 | *** join/#debian qncfj (~qncfj@ip70-188-147-36.ri.ri.cox.net) |
| 01:54.03 | dirae | When I run "DRI_PRIME=1 glxinfo | grep "OpenGL renderer"" I get: OpenGL renderer string: Gallium 0.4 on AMD ICELAND (DRM 3.8.0 / 4.9.0-3-amd64, LLVM 3.9.1) |
| 01:54.33 | *** join/#debian sorin-mihai (equinox@unaffiliated/sorin-mihai) |
| 01:56.29 | *** join/#debian sumyunseal1 (~sumyunsea@cpe-108-185-166-234.socal.res.rr.com) |
| 01:58.17 | *** join/#debian Mahe (~mahe@p5B2F2370.dip0.t-ipconnect.de) |
| 01:58.45 | *** join/#debian Se-bash (~seba@unaffiliated/se-bash) |
| 02:00.37 | *** part/#debian spinbee (~spinbee@modemcable176.93-203-24.mc.videotron.ca) |
| 02:01.54 | *** join/#debian uNmowed (~Mayu@st0160.nas811.p-yamagata.nttpc.ne.jp) |
| 02:01.56 | leibniz | hello |
| 02:02.37 | leibniz | i am trying to chmod 777 /var/www/html/* so i can upload and delete files on ftp |
| 02:02.43 | leibniz | but it's not working for some reason |
| 02:03.28 | *** part/#debian qncfj (~qncfj@ip70-188-147-36.ri.ri.cox.net) |
| 02:04.21 | *** join/#debian domovoy_ (~domovoy@37.169.82.133) |
| 02:05.32 | *** join/#debian spinbee (~spinbee@modemcable176.93-203-24.mc.videotron.ca) |
| 02:07.34 | *** join/#debian mdorenka (~mdorenka@unaffiliated/mdorenka) |
| 02:09.00 | *** mode/#debian [+l 1652] by debhelper |
| 02:10.40 | Arianna | What is the URL for downloading jessie DVD images via jigdo? |
| 02:11.02 | *** join/#debian nils_ (~nils_@pdpc/supporter/35for7/nils) |
| 02:11.26 | dvs | Arianna, where even the .jigdo file is. |
| 02:11.27 | abrotman | leibniz: please don't do that, it's completely insecure |
| 02:11.34 | *** join/#debian wilbert (~wilbert@unaffiliated/wilbert) |
| 02:14.30 | Arianna | I looked at https://cdimage.debian.org/debian-cd/current/i386/jigdo-dvd/ but that's not jessie and has no link to it |
| 02:16.16 | *** join/#debian r0Oter (~r00ter@p5DDF2DDE.dip0.t-ipconnect.de) |
| 02:17.59 | *** join/#debian Hyp3ri0n (~OtakuSenp@unaffiliated/otakusenpai) |
| 02:20.25 | *** join/#debian sorin-mihai (equinox@unaffiliated/sorin-mihai) |
| 02:21.18 | dvs | Arianna, https://cdimage.debian.org/debian-cd/current/i386/jigdo-dvd/debian-9.0.0-i386-DVD-1.jigdo |
| 02:21.39 | *** join/#debian OS-30315 (~OS-30315@46.102.245.202) |
| 02:23.04 | *** join/#debian nona (~nona@catv-89-132-115-162.catv.broadband.hu) |
| 02:23.46 | leibniz | how do i make it so i can edit the files in /var/www/html |
| 02:23.48 | leibniz | ? |
| 02:25.17 | jmcnaught | leibniz: you can add your user to the www-data group. Or you could make a directory in /var/www/html that is owned by your user |
| 02:25.43 | leibniz | but then i'd have to use a / after the url |
| 02:25.47 | jmcnaught | leibniz: chmod 777 would make everything writable by everyone, not a good policy |
| 02:26.16 | dvs | Arianna, http://cdimage.debian.org/cdimage/archive/8.8.0/amd64/jigdo-dvd/debian-8.8.0-amd64-DVD-1.jigdo |
| 02:27.12 | leibniz | ok |
| 02:27.30 | leibniz | well i changed the directory to the user /home/user/ |
| 02:27.33 | leibniz | or whatnot |
| 02:27.47 | leibniz | and that didn't seem to work |
| 02:28.03 | leibniz | i just want to be able to edit the files in /var/www/html without being root |
| 02:28.08 | leibniz | edit add files too |
| 02:30.53 | *** join/#debian Cabanossi (~Cabanossi@p57995CEB.dip0.t-ipconnect.de) |
| 02:32.03 | *** join/#debian renzhi (~renzhi@116.247.71.178) |
| 02:33.16 | *** join/#debian CBF16888 (~CBF16888@106.1.224.236) |
| 02:33.27 | *** join/#debian strive (~strive@unaffiliated/strive/x-8457361) |
| 02:35.05 | *** join/#debian dirae (~rea@41.254.9.199) |
| 02:35.06 | leibniz | i found it |
| 02:35.11 | leibniz | you guys couldn't help me |
| 02:35.13 | leibniz | :O |
| 02:39.10 | pacha | dirae: that means that you have the AMD GPU enabled and running, what program are you using for checking out your gpu information? |
| 02:43.31 | dirae | pacha: settings? ^^. What a program would you recommend? and if the AMD GPU enabled why can't I get hashcat to run properly? I get clGetPlatformIDs(): CL_PLATFORM_NOT_FOUND_KHR |
| 02:43.49 | *** join/#debian dirae (~rea@41.254.9.199) |
| 02:44.45 | pacha | dirae: I think that depends on your DE/WM. I havent used Gnome too much but I dont remember a "GPU settings" option there |
| 02:45.22 | *** join/#debian a1f (~user@213.152.161.244) |
| 02:45.48 | pacha | dirae: that output of glxinfo (which is what matters) tells you that you are running everything that needs OpenGL through your GPU. never used hashcat so no idea what that error mean |
| 02:46.29 | *** join/#debian Kulrak (~101001101@115.143.215.218.dyn.iprimus.net.au) |
| 02:46.29 | *** join/#debian Kulrak (~101001101@tlug/member/kulrak) |
| 02:47.41 | dirae | pacha: Thanks. It seems like I have to load the "amdgpu-pro" driver instead of "amdgpu"?. I downloaded the "amdgpu-pro" driver for ubuntu (no support for debian from the official amd website) and when I try to install it it says unsupport os. |
| 02:48.16 | *** join/#debian dasher00 (~dasher00@185.23.213.22) |
| 02:48.46 | pacha | dirae: https://wiki.debian.org/AtiHowTo follow this, step by step. use the free drivers, fglrx is dead. I had no problems at all, and I set up this a lot of times on different machines |
| 02:49.01 | *** mode/#debian [+l 1646] by debhelper |
| 02:50.02 | pacha | but probably it has something to do with hashcat, and not related to gpus at all |
| 02:50.49 | *** join/#debian peterbec` (~peterbeci@75-142-96-216.static.mtpk.ca.charter.com) |
| 02:51.24 | *** join/#debian chachasmooth (~chachasmo@unaffiliated/chachasmooth) |
| 02:51.35 | *** join/#debian qqumber (~qqumber@gateway/tor-sasl/qqumber) |
| 02:51.36 | qqumber | why, why should I exercise or brush my teeth? Who cares, right? We all die in the end anyway, I don't care. So why should I? I enjoy being homeless. |
| 02:52.15 | dirae | Ok i'll try that out. Thanks! |
| 02:53.09 | *** join/#debian vaidik (~vaidik@182.64.25.10) |
| 02:55.33 | *** join/#debian pfoo (~pfood@unaffiliated/pfoo) |
| 02:58.07 | *** join/#debian davimore (~davimore@185.143.230.224) |
| 03:00.56 | *** join/#debian Cabanossi (~Cabanossi@p57995CEB.dip0.t-ipconnect.de) |
| 03:05.59 | *** join/#debian e14 (~e14@2601:184:487f:ff30:c86b:ebd0:fe43:e5d3) |
| 03:06.08 | *** join/#debian dirae (~rea@41.254.9.199) |
| 03:12.36 | *** join/#debian pingfloyd (~pingfloyd@unaffiliated/pingfloyd) |
| 03:12.52 | *** join/#debian Adbray (~Adbray@2001:470:c692:666:9599:afe7:20fd:1b64) |
| 03:13.12 | *** join/#debian user34345 (~user66@cpe-70-117-132-249.hot.res.rr.com) |
| 03:16.32 | *** join/#debian dirae (~rea@41.254.9.199) |
| 03:16.32 | *** join/#debian singer22 (~singer22@gateway/tor-sasl/singer22) |
| 03:20.05 | *** join/#debian Rokixz (~rokas@5.199.160.9) |
| 03:21.44 | *** join/#debian password2 (~password@192-143-165-214.ip.airmobile.co.za) |
| 03:22.17 | *** join/#debian password2 (~password@unaffiliated/password2) |
| 03:23.32 | *** join/#debian Zvmdyv (~Zvmdyv@unaffiliated/zvmdyv) |
| 03:35.31 | *** join/#debian kryptoz (~kryptoz@49.207.60.194) |
| 03:36.10 | password2 | I'm so glad I finally got stable to install on my desktop |
| 03:37.56 | dvs | yay |
| 03:38.16 | *** join/#debian vaidik (~vaidik@223.239.252.61) |
| 03:41.22 | *** join/#debian HasanAtizaz (~hasan@39.50.186.59) |
| 03:41.52 | *** join/#debian hemebond (~james@2406:e001:3a30:1:dc5d:7d0d:4c8f:ba4f) |
| 03:45.38 | hemebond | So I'm seeing `W: Failed to fetch http://cloudfront.debian.net/debian/dists/jessie-backports/main/source/SourcesIndex Hash Sum mismatch` |
| 03:45.48 | hemebond | Do I have to tell the server to update its key or something? |
| 03:45.53 | *** join/#debian Cabanossi (~Cabanossi@p57995CEB.dip0.t-ipconnect.de) |
| 03:45.56 | *** join/#debian Rusty1_ (~kanotix@cpe-24-194-198-94.nycap.res.rr.com) |
| 03:50.52 | *** join/#debian Ticho_ (~Ticho@unaffiliated/ticho) |
| 03:53.07 | *** join/#debian ryouma (~user@unaffiliated/ryouma) |
| 03:53.56 | *** join/#debian vaidik (~vaidik@223.239.252.61) |
| 03:54.36 | *** join/#debian Butt3rfly (~Butt3rfly@94.8.147.94) |
| 03:54.36 | *** join/#debian Butt3rfly (~Butt3rfly@trivialand/genius/butt3rfly) |
| 03:54.46 | *** join/#debian Ticho (~Ticho@unaffiliated/ticho) |
| 03:55.02 | *** join/#debian HasanAtizaz (~hasan@39.50.186.59) |
| 03:56.21 | *** join/#debian wwwwwwww (~wwww@cpe-66-75-241-16.san.res.rr.com) |
| 03:57.11 | wwwwwwww | how do i install a downloaded program as a normal package? |
| 03:57.14 | wwwwwwww | https://i.imgur.com/pXA6CI7.png |
| 03:57.29 | wwwwwwww | so I can manage it with dpkg, and so that it shows up in rofi/d-menu |
| 03:57.33 | *** join/#debian erabti (~mae@41.254.9.199) |
| 03:57.33 | *** join/#debian king1337-2 (~king1337@S0106bcd165689a83.vs.shawcable.net) |
| 03:57.36 | *** part/#debian king1337-2 (~king1337@S0106bcd165689a83.vs.shawcable.net) |
| 03:57.40 | wwwwwwww | i dont want it just sitting in my home directory |
| 03:58.09 | *** join/#debian Ticho_ (~Ticho@unaffiliated/ticho) |
| 03:58.11 | jmcnaught | !nmg |
| 03:58.11 | dpkg | The packaging tutorial (http://deb.li/QYyI) and the New Maintainer's Guide (http://deb.li/3DiDA) are good places to start learning about Debian packaging. You should also ask me about <devref> and <policy> to understand how packages should be maintained and how they should interact with each other. Ask me about <package basics>, <mentors>, <best practices> <build without helper>. http://www.debian.org/devel/ |
| 03:58.24 | *** join/#debian jeffspeff (~Jeff@209.141.208.197) |
| 03:58.34 | *** join/#debian fstd_ (~fstd@unaffiliated/fisted) |
| 03:59.55 | *** join/#debian Cabanossi (~Cabanossi@p57995BB5.dip0.t-ipconnect.de) |
| 04:00.03 | *** join/#debian v01t (~v01t@p4FE44AFB.dip0.t-ipconnect.de) |
| 04:00.31 | jmcnaught | wwwwwwww: in this specific case it looks like you are trying to run some fork of firefox, I suggest that you are better off running the firefox-esr package included with Debian, which is supported by Debian's security team, and also indirectly by Mozilla's security team |
| 04:00.32 | *** join/#debian bnw (~bnw@unaffiliated/bnw) |
| 04:02.06 | *** join/#debian Ticho (~Ticho@unaffiliated/ticho) |
| 04:02.46 | *** join/#debian Epakai (~coweater@47.188.49.58) |
| 04:04.26 | *** join/#debian MikZyth (~mikhail@77.34.44.0) |
| 04:04.31 | *** join/#debian Lyberta (~Lyberta@fsf/member/FaTony) |
| 04:05.14 | Lyberta | hi, I'm running a debian VM using KVM/QEMU, how can I ssh into it from the host which is also debian? |
| 04:05.50 | *** join/#debian ralinux (~ralinux@47.60.50.239) |
| 04:05.52 | *** join/#debian kajika (~kajika@unaffiliated/kajika) |
| 04:05.52 | jmcnaught | Lyberta: do you know the hostname or IP address of the Debian VM? |
| 04:06.07 | Lyberta | jmcnaught, it doesn't respond to ping |
| 04:06.22 | jmcnaught | Lyberta: are you using libvirt? |
| 04:06.52 | Lyberta | jmcnaught, I think yes, I use virt-manager GUI to create it and run it |
| 04:06.57 | *** join/#debian cadillac_ (~omab@r167-61-108-157.dialup.adsl.anteldata.net.uy) |
| 04:07.00 | *** join/#debian k0nsl (~k0nsl@feel.the.power.feel.the.k3k.su) |
| 04:07.00 | *** join/#debian k0nsl (~k0nsl@unaffiliated/k0nsl) |
| 04:07.08 | *** join/#debian sleepyhead (~sleepyhea@unaffiliated/sleepyhead) |
| 04:07.26 | jmcnaught | Lyberta: yeah, that's a front-end for libvirt. Is the VM configured to use the 'default' network that libvirt automatically created? |
| 04:07.52 | *** join/#debian elninja44 (~arrr@c-73-36-111-215.hsd1.in.comcast.net) |
| 04:08.30 | *** join/#debian fyrril2 (~fyrril@2605:a601:7014:1800:1df:f424:2778:ffa1) |
| 04:08.41 | Lyberta | jmcnaught, no, it says that it is inactive and doesn't launch with it, I selected "Host device eth0 macvtap" |
| 04:10.08 | *** join/#debian cerebro (~cerebro@goo.atnf.csiro.au) |
| 04:10.15 | jmcnaught | Lyberta: let's start with the basic default network created by libvirt. In virt-manager you can double-click on a connection (the line that says QEMU/KVM) and start the connection in the virtual networks tab. |
| 04:11.04 | *** join/#debian XXOOXX (~XXOOXX@58.22.114.50) |
| 04:11.16 | jmcnaught | Lyberta: then change the network source of the NIC device (in the details for the VM) to the virtual network: default |
| 04:11.45 | jmcnaught | ,i libnss-libvirt |
| 04:11.47 | judd | Package libnss-libvirt (libs, extra) in stretch/amd64: nss plugin providing IP add ress resolution for virtual machines. Version: 3.0.0-4; Size: 157.8k; Installed: 356k; Homepage: http://libvirt.org |
| 04:12.18 | jmcnaught | Lyberta: and install the libnss-libvirt package described above on the host |
| 04:12.30 | *** join/#debian internat (~nf@220-245-56-111.tpgi.com.au) |
| 04:12.38 | *** join/#debian marcoslater (~marcoslat@freenode/sponsor/halothe23) |
| 04:13.16 | *** join/#debian renzhi (~renzhi@116.247.71.178) |
| 04:13.31 | Lyberta | jmcnaught, done |
| 04:13.38 | *** join/#debian erre (~erre@unaffiliated/erre) |
| 04:14.13 | *** join/#debian numjer (~numjer@gateway/tor-sasl/numjer) |
| 04:14.58 | Lyberta | what's next? |
| 04:16.40 | *** part/#debian MikZyth (~mikhail@77.34.44.0) |
| 04:17.31 | *** join/#debian datasmurf (~datasmurf@unaffiliated/datasmurf) |
| 04:19.45 | *** join/#debian Frikilinux (~Friki@unaffiliated/frikilinux) |
| 04:21.31 | *** join/#debian peterbec` (~peterbeci@75-142-96-216.static.mtpk.ca.charter.com) |
| 04:21.33 | *** join/#debian pav (~pav@78-0-228-236.adsl.net.t-com.hr) |
| 04:22.28 | *** join/#debian kongkong (~atomic@221.192.179.55) |
| 04:22.42 | *** join/#debian robotroll (~robotroll@unaffiliated/robotroll) |
| 04:23.45 | jmcnaught | Lyberta: look at /etc/nsswitch.conf on the host, confirm that libvirt is on the hosts line |
| 04:24.11 | *** join/#debian RTFM[away] (~RTFMaway]@unaffiliated/rtfmaway/x-3892344) |
| 04:24.21 | hemebond | Yay, cloudfront is fixed. |
| 04:26.02 | jmcnaught | Lyberta: then restart the VM, if its network interface is configured, you should be able to resolve the hostname of the VM |
| 04:26.59 | jmcnaught | Lyberta: https://libvirt.org/nss.html that's the documentation for this package that we've installed |
| 04:27.04 | *** join/#debian oberstein (~ober@2605:6400:20:748::ddee:deee) |
| 04:27.40 | *** join/#debian ofg|brtr (~ofog@unaffiliated/ofogbartar/x-0816739) |
| 04:28.23 | *** join/#debian XXOOXX (~XXOOXX@58.22.114.50) |
| 04:29.15 | *** join/#debian slugmx (~slugmx@189.226.87.158) |
| 04:29.56 | *** join/#debian Cabanossi (~Cabanossi@p57995BB5.dip0.t-ipconnect.de) |
| 04:29.58 | ofg|brtr | I want to beautify my bash prompt. I found airline bash prompt called promptline. Are there any similar things around for tweaking coloring hello and other fancy stuff for bash prompt? |
| 04:30.14 | *** join/#debian UngratefulLoliRe (~Ungratefu@187.36.145.150) |
| 04:31.54 | *** join/#debian juantelez (~juantelez@unaffiliated/juantelez) |
| 04:33.27 | Lyberta | jmcnaught, I don't see libvirt in nsswitch.conf, here's the line: hosts: files mdns4_minimal [NOTFOUND=return] dns mdns4 |
| 04:33.48 | *** join/#debian maxwell (~maxwell@ipbcc26c3e.dynamic.kabel-deutschland.de) |
| 04:35.46 | jmcnaught | Lyberta: add libvirt between [NOTFOUND=return] and dns |
| 04:35.49 | TomG2 | ofg|brtr, i'd search the web in general, or uhm apt-cache search |
| 04:36.03 | TomG2 | ofg|brtr, there are archives of configuration files on the web |
| 04:36.07 | *** part/#debian hemebond (~james@2406:e001:3a30:1:dc5d:7d0d:4c8f:ba4f) |
| 04:36.12 | TomG2 | at least there used to be, i think |
| 04:36.36 | ofg|brtr | TomG2: could you be any specific? |
| 04:36.39 | ofg|brtr | name? |
| 04:36.43 | ofg|brtr | where it was? |
| 04:37.27 | TomG2 | no, i don't remember. i probably am not helping at all |
| 04:37.58 | Lyberta | jmcnaught, added, so how do I resolve now? |
| 04:38.42 | *** join/#debian pills (~root@223.230.74.171) |
| 04:39.37 | *** join/#debian jmcnaught (~jeremy@unaffiliated/jmcnaught) |
| 04:39.59 | jmcnaught | you cannot resolve the hostname of the VM? |
| 04:40.04 | *** join/#debian VentGrey (~VentGrey@189.253.180.188) |
| 04:40.28 | VentGrey | Hello Im the kernel guy that was here like 4 hours ago |
| 04:41.28 | VentGrey | I tried to build the kernel with this command : make deb-pkg LOCALVERSION=-falcot KDEB_PKGVERSION=$(make kernelversion)-1 |
| 04:41.57 | VentGrey | It finished with no errors but i cannot find my .deb packages anywhere, they are not installed nor deleted |
| 04:44.03 | *** join/#debian Butt3rfly (~Butt3rfly@94.8.147.94) |
| 04:44.03 | *** join/#debian Butt3rfly (~Butt3rfly@trivialand/genius/butt3rfly) |
| 04:46.14 | *** join/#debian vjacob (~vjacob@82.103.135.167) |
| 04:47.39 | Lyberta | jmcnaught, I don't know how |
| 04:48.18 | jmcnaught | Lyberta: resolve just means that the hostname gets translated automatically to the IP address by whatever program you're using |
| 04:48.47 | jmcnaught | Lyberta: does "ssh lyberta@hostnameofvm" work? |
| 04:49.15 | Lyberta | jmcnaught, ah yes, I didn't know it works this way |
| 04:49.35 | peterrooney | VentGrey: try ``ls ..'' |
| 04:50.22 | VentGrey | I found them in the trashbin |
| 04:50.45 | VentGrey | of a certain user >~> that shouldn't have a trashbin |
| 04:52.28 | Lyberta | jmcnaught, alright, that works. now is there a way to use libvirt as non-root? a disk image and CD-ROM images I used became owned by root |
| 04:52.58 | *** join/#debian fhdrin (~fhdrin@104.168.154.50) |
| 04:53.29 | *** join/#debian freenoodle (~jr@p4FC7FFB9.dip0.t-ipconnect.de) |
| 04:54.19 | *** join/#debian boris_t (~boris_t@94.190.2.146) |
| 04:54.48 | jmcnaught | Lyberta: add your user account to the libvirt group "adduser lyberta libvirt" |
| 04:57.41 | *** join/#debian Ametrine (~Butt3rfly@94.8.147.94) |
| 04:57.41 | *** join/#debian Ametrine (~Butt3rfly@trivialand/genius/butt3rfly) |
| 04:58.31 | *** join/#debian freenoodle (~jr@193.96.224.244) |
| 04:58.50 | *** join/#debian k0nsl (~k0nsl@feel.the.power.feel.the.k3k.su) |
| 04:58.50 | *** join/#debian k0nsl (~k0nsl@unaffiliated/k0nsl) |
| 04:59.47 | *** join/#debian dirae (~rea@41.254.9.199) |
| 05:03.29 | tripkin | Sometime back I upgraded from mysql to mariadb to resolve some issues. At the time, I chose to upgrade to mariadb-10.2 and so I used the repo information at mariadb.org. I want to drop back to v10.1 so I can use the debian repos instead. I have stopped and purged 10.2, removed the repo from sources.list.d, but apt policy still shows 10.2 and no installation candidates for 10.1. Any ideas on how I can fix this, short of reinstalling? |
| 05:03.29 | tripkin | Any help would be appreciated! |
| 05:03.43 | *** join/#debian luckman212 (~luckman21@unaffiliated/luckman212) |
| 05:04.09 | *** join/#debian Drzacek (~Drzacek@dslb-084-062-081-207.084.062.pools.vodafone-ip.de) |
| 05:06.01 | *** part/#debian dirae (~rea@41.254.9.199) |
| 05:06.27 | *** join/#debian dirae (~rea@41.254.9.199) |
| 05:06.55 | *** join/#debian nona (~nona@catv-89-132-115-162.catv.broadband.hu) |
| 05:07.04 | jmcnaught | !bat |
| 05:07.05 | dpkg | In order to troubleshoot your problem with apt-get, apt or aptitude we need ALL OF THE FOLLOWING information: 1. complete output of your apt-get/apt/aptitude run (including the command used) 2. output from "apt-cache policy pkg1 pkg2..." for ALL packages mentioned ANYWHERE in the problem, and 3. "apt-cache policy". Use http://paste.debian.net/ to provide us with this information. Also ask me about <localized errors>. |
| 05:07.08 | *** join/#debian sleepyhead (~sleepyhea@unaffiliated/sleepyhead) |
| 05:07.13 | jmcnaught | tripkin: can you provide the above please? |
| 05:07.51 | tripkin | jmcnaught, I will do it right now. |
| 05:08.36 | *** join/#debian dec0n (~dec0n@draugas.gis-centras.lt) |
| 05:09.01 | *** mode/#debian [+l 1640] by debhelper |
| 05:09.47 | *** join/#debian Butt3rfly (~Butt3rfly@94.8.147.94) |
| 05:09.47 | *** join/#debian Butt3rfly (~Butt3rfly@trivialand/genius/butt3rfly) |
| 05:14.20 | *** join/#debian nast (~nast@45.62.248.146) |
| 05:14.55 | tripkin | jmcnaught, it looks like 10.2 is gone now, but 10.1 is still not a candidate... http://paste.debian.net/974854/ |
| 05:15.05 | *** join/#debian Wulf (~Wulf@unaffiliated/wulf) |
| 05:16.54 | jmcnaught | ,v mariadb-server |
| 05:16.55 | judd | Package: mariadb-server on amd64 -- jessie-security: 10.0.25-0+deb8u1; jessie: 10.0.25-0+deb8u1; jessie-security: 10.0.30-0+deb8u1; jessie: 10.0.30-0+deb8u2; stretch: 10.1.23-9+deb9u1; buster: 10.1.24-6; sid: 10.1.24-6; experimental: 10.3.0-0+exp1; experimental: 10.3.0-0+exp2 |
| 05:17.37 | tripkin | Ah. Thanks. For some reason I was under the impression that 10.1 was available now in Jessie. |
| 05:17.37 | jmcnaught | tripkin: it looks like you're still on jessie which has 10.0, you need to upgrade to stretch to get 10.1 |
| 05:17.56 | jmcnaught | https://www.debian.org/releases/stretch/amd64/release-notes/ there are upgrade instructions in the stretch release notes |
| 05:18.13 | tripkin | Fantastic! Thanks for your jelp jmcnaught. I will look that up. |
| 05:18.52 | *** join/#debian freenoodle (~jr@p4FC7FFB9.dip0.t-ipconnect.de) |
| 05:18.58 | *** join/#debian hexnewbie (~hexnewbie@unaffiliated/hexnewbie) |
| 05:20.28 | *** join/#debian k0nsl (~k0nsl@feel.the.power.feel.the.k3k.su) |
| 05:20.28 | *** join/#debian k0nsl (~k0nsl@unaffiliated/k0nsl) |
| 05:21.09 | *** join/#debian Kulrak (~101001101@115.143.215.218.dyn.iprimus.net.au) |
| 05:21.09 | *** join/#debian Kulrak (~101001101@tlug/member/kulrak) |
| 05:21.33 | *** join/#debian chachasmooth (~chachasmo@unaffiliated/chachasmooth) |
| 05:22.15 | *** join/#debian peterbec` (~peterbeci@75-142-96-216.static.mtpk.ca.charter.com) |
| 05:24.58 | *** join/#debian k0nsl (~k0nsl@feel.the.power.feel.the.k3k.su) |
| 05:24.58 | *** join/#debian k0nsl (~k0nsl@unaffiliated/k0nsl) |
| 05:25.48 | *** join/#debian GJdan (~dan@gateway/vpn/privateinternetaccess/gjdan) |
| 05:26.43 | *** join/#debian smidlers (smyers@redhat/smyers) |
| 05:28.10 | *** join/#debian oberstein (~ober@2605:6400:20:748::ddee:deee) |
| 05:29.25 | *** join/#debian lost_soul (~shawn@cpe-74-79-246-76.twcny.res.rr.com) |
| 05:30.41 | *** join/#debian Elirips (~Elirips@242.109.22.178.ftth.as8758.net) |
| 05:31.45 | *** join/#debian Butt3rfly (~Butt3rfly@94.8.147.94) |
| 05:31.45 | *** join/#debian Butt3rfly (~Butt3rfly@trivialand/genius/butt3rfly) |
| 05:33.24 | *** join/#debian mar77i (~mar77i@77-56-218-203.dclient.hispeed.ch) |
| 05:36.07 | *** join/#debian nona (~nona@catv-89-132-115-162.catv.broadband.hu) |
| 05:36.37 | *** join/#debian me (~meme@176-114-240-37.rychlydrat.cz) |
| 05:37.46 | *** join/#debian sander85 (~sander@105-70-157-37.sta.estpak.ee) |
| 05:40.02 | *** join/#debian gwolf23 (~gwolf@80.232.163.46) |
| 05:40.14 | *** join/#debian sadf (bc14f012@gateway/web/freenode/ip.188.20.240.18) |
| 05:41.31 | sadf | hi |
| 05:41.57 | sadf | i´d like to know if smb encryption will be backported to stretch... anybody knows? |
| 05:41.58 | sadf | https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1670508 |
| 05:45.03 | *** join/#debian Cabanossi (~Cabanossi@p57995BB5.dip0.t-ipconnect.de) |
| 05:46.03 | *** join/#debian vaidik (~vaidik@115.248.81.253) |
| 05:46.26 | *** join/#debian sidetracking (~quassel@99-101-249-43.lightspeed.rcsntx.sbcglobal.net) |
| 05:46.38 | *** join/#debian super_gollum (~ich@5.146.210.93) |
| 05:47.09 | *** join/#debian dreamon (~dreamon@unaffiliated/dreamon) |
| 05:48.34 | *** join/#debian cyphase (~cyphase@unaffiliated/cyphase) |
| 05:49.01 | *** join/#debian robsta_sa (~robsta_sa@196.25.35.178) |
| 05:49.41 | *** join/#debian cyphase (~cyphase@unaffiliated/cyphase) |
| 05:50.44 | *** join/#debian cyphase (~cyphase@unaffiliated/cyphase) |
| 05:50.55 | *** join/#debian adoua (~adoua@unaffiliated/adoua) |
| 05:51.11 | *** join/#debian GJdan (~dan@gateway/vpn/privateinternetaccess/gjdan) |
| 05:51.40 | *** join/#debian k0nsl (~k0nsl@feel.the.power.feel.the.k3k.su) |
| 05:51.40 | *** join/#debian k0nsl (~k0nsl@unaffiliated/k0nsl) |
| 05:52.06 | *** join/#debian lost_soul (~shawn@cpe-74-79-246-76.twcny.res.rr.com) |
| 05:52.26 | *** join/#debian cyphase (~cyphase@unaffiliated/cyphase) |
| 05:54.04 | *** join/#debian cyphase (~cyphase@unaffiliated/cyphase) |
| 05:54.52 | *** join/#debian njumdl2014 (~njumdl201@221.6.40.178) |
| 05:55.33 | *** join/#debian LucaTM (~LucaTM@unaffiliated/lucatm) |
| 05:56.11 | *** join/#debian oish_ (~charlie@159.22.169.217.in-addr.arpa) |
| 05:56.33 | *** join/#debian cyphase (~cyphase@unaffiliated/cyphase) |
| 05:59.05 | *** join/#debian jurisl__ (~Yuriy@broadband-46-188-127-66.2com.net) |
| 06:00.36 | *** join/#debian sumyunseal1 (~sumyunsea@cpe-108-185-166-234.socal.res.rr.com) |
| 06:01.49 | GJdan | Having issues trying to sort out a dns leak while dabbling with PIA |
| 06:02.24 | GJdan | it seems the dns entries in my ASUS router are being leaked no matter what I do on my rig |
| 06:02.44 | GJdan | using openvpn to connect |
| 06:03.00 | *** join/#debian Wizek_ (~Wizek@catv-89-132-132-110.catv.broadband.hu) |
| 06:03.32 | *** join/#debian GaryJdan (~AndChat17@d75-157-130-131.bchsia.telus.net) |
| 06:04.46 | GJdan | I've tried playing with all the openresolv and systemd-resolved up down scripts before realizing that the router's DNS entries seem to get used no matter what resolv.conf says (the ones in resolv.conf get used as well) |
| 06:04.48 | sadf | will linux 4.11 be backported to stretch? |
| 06:05.01 | *** join/#debian shannara (~Stanislas@130.193.24.135) |
| 06:06.51 | *** join/#debian malademental (~emixam@LFbn-1-13375-63.w83-194.abo.wanadoo.fr) |
| 06:08.17 | *** join/#debian njumdl2014_ (~njumdl201@114.212.85.93) |
| 06:08.54 | *** join/#debian venkat_330 (~Thunderbi@115.252.65.26) |
| 06:09.00 | *** mode/#debian [+l 1651] by debhelper |
| 06:10.08 | *** join/#debian indistylo (~indistylo@122.172.249.166) |
| 06:10.42 | *** join/#debian ogny (~orkun@unaffiliated/ogny) |
| 06:11.01 | *** join/#debian h1t3sh (~h1t3sh@14.140.221.228) |
| 06:13.12 | *** join/#debian overlord_tm (~andraz@89-212-104-188.dynamic.t-2.net) |
| 06:13.15 | *** join/#debian danwellby (~danwellby@host86-184-109-215.range86-184.btcentralplus.com) |
| 06:13.36 | *** join/#debian xanacas (~xanacas__@dslb-094-219-232-149.094.219.pools.vodafone-ip.de) |
| 06:14.56 | *** join/#debian woshty (~irc@HSI-KBW-109-192-071-110.hsi6.kabel-badenwuerttemberg.de) |
| 06:15.18 | *** join/#debian peewhy (~peewhy@80.214.147.208) |
| 06:16.17 | *** join/#debian katyucha_ (~katyucha@68.149.2.109.rev.sfr.net) |
| 06:22.49 | *** join/#debian GJdan (~dan@gateway/vpn/privateinternetaccess/gjdan) |
| 06:23.53 | *** join/#debian pills (~root@223.230.74.171) |
| 06:24.59 | *** join/#debian Nawab (~OtakuSenp@unaffiliated/otakusenpai) |
| 06:25.10 | *** join/#debian unborn (~ugly@unaffiliated/unborn) |
| 06:25.24 | unborn | does anyone know how to turn this on ? http://i.imgur.com/saTE5A7.png |
| 06:25.26 | *** join/#debian nibble_zero (~chatzilla@37.244.231.177) |
| 06:26.16 | iodev | unborn: oh that looks like a gnome 3 extension |
| 06:26.34 | *** join/#debian os_ (~os@141.105.162.250) |
| 06:26.34 | *** join/#debian os_ (~os@unaffiliated/os-/x-7903479) |
| 06:27.50 | *** join/#debian __marco (~marco@2001:7e8:c80d:e600:e6a4:71ff:fef2:bce6) |
| 06:31.14 | *** join/#debian Cybertinus (~Cybertinu@cybertinus.customer.cloud.nl) |
| 06:32.15 | unborn | iodev: i think its build into gnome |
| 06:32.48 | jmcnaught | it looks like the system tray in GNOME 3.22 |
| 06:33.13 | *** join/#debian ptn (~ptn@c-24-20-89-127.hsd1.wa.comcast.net) |
| 06:33.24 | *** join/#debian robsta_sa (~robsta_sa@196.25.35.178) |
| 06:33.32 | *** join/#debian bvdk (~bvdkfreen@91.183.197.222) |
| 06:34.00 | *** part/#debian ptn (~ptn@c-24-20-89-127.hsd1.wa.comcast.net) |
| 06:34.56 | *** join/#debian hexnewbie (~hexnewbie@unaffiliated/hexnewbie) |
| 06:35.17 | *** join/#debian imm (~imm@107-168-195-217.cust.centrio.cz) |
| 06:35.18 | *** join/#debian donatas (~donatas@78-57-243-222.static.zebra.lt) |
| 06:37.34 | *** join/#debian nast (~nast@45.62.248.146) |
| 06:37.34 | *** join/#debian iViLe (~bob@c110-22-77-178.chirn3.vic.optusnet.com.au) |
| 06:39.39 | *** join/#debian Xanthor (~Xanthor@213-245-39-201.rev.numericable.fr) |
| 06:40.47 | *** join/#debian vaidik (~vaidik@115.248.81.253) |
| 06:41.47 | *** join/#debian michaelni (~michael@213-47-41-20.cable.dynamic.surfer.at) |
| 06:43.07 | *** join/#debian t0mmy (~tprrt@217.114.201.133) |
| 06:43.37 | *** join/#debian jackNemrod (~Thunderbi@185.75.141.25) |
| 06:44.26 | *** join/#debian solrize (~solrize@unaffiliated/solrize) |
| 06:45.24 | *** join/#debian robsta_sa (~robsta_sa@169-1-186-91.ip.afrihost.co.za) |
| 06:45.33 | *** join/#debian GJdan (~dan@d75-157-130-131.bchsia.telus.net) |
| 06:46.22 | *** join/#debian vaidik (~vaidik@115.248.81.253) |
| 06:47.02 | *** join/#debian dirae (~rea@41.254.9.199) |
| 06:49.00 | *** mode/#debian [+l 1658] by debhelper |
| 06:49.55 | *** join/#debian dionysus69 (~Thunderbi@unaffiliated/dionysus69) |
| 06:52.34 | *** join/#debian vadimkolchev (~vkolchev@87.255.70.158) |
| 06:53.05 | unborn | yeah.. Im on older version so i guess only 3.22+ have that |
| 06:54.22 | jmcnaught | the version of GNOME in jessie does not have that, it has the message bar at the bottom that pops up when you mouse down |
| 06:57.24 | *** join/#debian Baudelaire (~Baudelair@wikipedia/Baudelaire) |
| 06:58.10 | *** join/#debian robsta_s_ (~robsta_sa@196.25.35.178) |
| 06:58.40 | *** join/#debian Baudelaire (~Baudelair@wikipedia/Baudelaire) |
| 07:02.04 | *** join/#debian oish_ (~charlie@159.22.169.217.in-addr.arpa) |
| 07:02.20 | *** part/#debian unborn (~ugly@unaffiliated/unborn) |
| 07:02.23 | *** join/#debian nix64bit (~Thunderbi@197.155.4.163) |
| 07:02.36 | *** join/#debian Wizek_ (~Wizek@catv-89-132-132-110.catv.broadband.hu) |
| 07:04.44 | *** join/#debian eberna (~eberna@host226-197-static.95-94-b.business.telecomitalia.it) |
| 07:04.56 | *** join/#debian kharloss (~kharloss@5.2.152.203) |
| 07:05.18 | *** join/#debian sdx23 (~sdx23@unaffiliated/sdx23) |
| 07:06.34 | imm | q |
| 07:06.55 | *** join/#debian Texou (~Texou@unaffiliated/texou) |
| 07:07.47 | *** join/#debian Haudegen (~quassel@178.115.237.87) |
| 07:08.07 | *** join/#debian kongkong (~atomic@221.192.179.55) |
| 07:08.54 | *** join/#debian martinus__ (~martin@111.239.24.109.rev.sfr.net) |
| 07:10.20 | ofg|brtr | How could I block all incomming traffic from a domain name to my server with IPTABLES? consider the domain name in question (that I want it gone) is wickeddomain.num for example. |
| 07:11.41 | *** join/#debian CrazyEddy (crazyed@wrongplanet/CrazyEddy) |
| 07:12.16 | *** join/#debian lanu (~host@unaffiliated/lanu) |
| 07:13.22 | sleepyhead | ofg|brtr: iptables -I INPUT -p tcp -s host.domain.com -j DROP |
| 07:13.25 | *** join/#debian nast (~nast@45.62.248.146) |
| 07:13.43 | sleepyhead | not sure whether iptables can do dns lookups. if yo know the webserver's ip then just do this |
| 07:13.58 | sleepyhead | ofg|brtr: iptables -I INPUT -p tcp -s ip.addr.e.ss -j DROP |
| 07:14.35 | sleepyhead | ofg|brtr: by host.domain.com i mean wickeddomain.num |
| 07:14.57 | *** join/#debian linuxthefish (~linuxthef@unaffiliated/edmundf) |
| 07:15.36 | *** join/#debian MACscr (~MACscr@c-73-9-230-5.hsd1.il.comcast.net) |
| 07:15.45 | *** join/#debian luckman212 (~luckman21@unaffiliated/luckman212) |
| 07:15.47 | *** join/#debian Pjusur (~Pjusur@ti0035a400-0403.bb.online.no) |
| 07:15.49 | *** join/#debian hgnoel1980 (~hgnoel198@host213-123-120-65.in-addr.btopenworld.com) |
| 07:17.05 | ofg|brtr | sleepyhead: by the last answer; I solved the problem but that I have another question. does it block or say DROP all the variants www.wickeddomain.num w3.wickeddomain.num sub2.sub1.wickeddomain.com and so on |
| 07:17.24 | *** join/#debian kryptoz (~kryptoz@49.207.60.194) |
| 07:17.43 | sleepyhead | ofg|brtr: not unless you add additional rules for those domains. if they are all on one ip address then an ip rule alone will suffice. |
| 07:18.00 | sleepyhead | ofg|brtr: once again i'm not sure iptables will do a dns lookup. i've only ever blocked ips |
| 07:18.03 | *** join/#debian f-a (~f-a@151.48.56.228) |
| 07:19.02 | *** join/#debian stu_meat (~stu_meat@S0106000acd2b4298.cg.shawcable.net) |
| 07:19.05 | f-a | my laptop wasn't resuming after I sent it to sleep, even after rebooting. I fixed it by adding `noresume` in the boot parameters. |
| 07:19.47 | f-a | my question: I do believe/think `noresume` should be default in recovery mode, where should I report the suggestion? grub? |
| 07:20.25 | *** join/#debian kryptoz (~kryptoz@49.207.60.194) |
| 07:21.22 | *** join/#debian tripkin (~tripkin@S0106000acd2b4298.cg.shawcable.net) |
| 07:21.37 | ofg|brtr | sleepyhead: right now all are on one ip address. then what would be the revised IPTABLES command with IP address instead of the domain? |
| 07:21.51 | *** join/#debian vaidik (~vaidik@115.248.81.253) |
| 07:21.53 | sleepyhead | ofg|brtr: yep |
| 07:22.01 | sleepyhead | ofg|brtr: iptables -I INPUT -p tcp -s ip.addr.e.ss -j DROP |
| 07:22.03 | *** join/#debian garathem (~garathem@fw-front.credativ.com) |
| 07:22.09 | *** join/#debian cryptic (~cryptic@67-8-35-31.res.bhn.net) |
| 07:22.38 | ofg|brtr | sleepyhead: I or A? should go at the top of the IPTABLES? |
| 07:22.55 | sleepyhead | ofg|brtr: 'I' will put it to the top. 'A' will put it at the bottom |
| 07:22.59 | *** join/#debian RebelCoder (~Yuriy@5.134.222.156) |
| 07:23.05 | *** join/#debian peterbec` (~peterbeci@75-142-96-216.static.mtpk.ca.charter.com) |
| 07:23.44 | *** join/#debian bvdk (~bvdkfreen@91.183.197.222) |
| 07:24.05 | sleepyhead | ofg|brtr: do you have iptables-persistent installed? if not install that package to persist these changes across reboot |
| 07:24.32 | sleepyhead | ofg|brtr: also do a `dpkg-reconfigure iptables-persistent` to save the rules any time you make changes. |
| 07:26.29 | *** join/#debian cerbere (~cerbere@155.210.31.93.rev.sfr.net) |
| 07:26.52 | *** join/#debian _KaszpiR_ (quasselcor@unaffiliated/kaszpir/x-3157048) |
| 07:27.33 | *** join/#debian aruns (~indistylo@122.171.45.8) |
| 07:27.42 | *** join/#debian _bsurfer_ (~bsurfer@131.228.2.20) |
| 07:28.55 | *** join/#debian jackNemrod_ (~Thunderbi@217.74.105.4) |
| 07:29.01 | *** mode/#debian [+l 1668] by debhelper |
| 07:29.06 | *** join/#debian HornyNegress (~negress@192.200.120.52) |
| 07:29.10 | HornyNegress | Hello |
| 07:30.21 | *** join/#debian SabakuRou (~Sabaku@69.255.195.77.rev.sfr.net) |
| 07:31.46 | *** join/#debian saaar (~saaar@195.251.208.13) |
| 07:34.50 | *** join/#debian pherecratus (~pherecrat@ipb218a139.dynamic.kabel-deutschland.de) |
| 07:36.10 | *** join/#debian sim590 (~sim590@96-127-219-18.qc.cable.ebox.net) |
| 07:36.31 | *** join/#debian _bsurfer (~bsurfer@131.228.2.20) |
| 07:37.17 | *** join/#debian turfal (~Thunderbi@27.red-213-97-245.staticip.rima-tde.net) |
| 07:37.58 | sleepyhead | hi |
| 07:38.14 | *** join/#debian afuentes (~kusanagi@201.165.35.37.dynamic.jazztel.es) |
| 07:39.22 | *** join/#debian fr0tzed (~fr0tzed@194.135.90.220) |
| 07:39.30 | *** join/#debian fr0tzed (~fr0tzed@unaffiliated/fr0tzed) |
| 07:39.32 | *** join/#debian f10 (~flo@ip5b40643f.dynamic.kabel-deutschland.de) |
| 07:40.33 | Mahe | hey |
| 07:41.25 | *** join/#debian alfred_ (~quassel@91.112.129.86) |
| 07:42.27 | *** join/#debian HeOS (~heos@broadband-95-84-240-142.moscow.rt.ru) |
| 07:43.22 | *** join/#debian sidetracking (~quassel@99-101-249-43.lightspeed.rcsntx.sbcglobal.net) |
| 07:43.34 | *** join/#debian fghjb3567 (~Mutter@153.101.71.72) |
| 07:43.51 | HornyNegress | I'm a negress |
| 07:43.56 | *** join/#debian overlord_tm (~andraz@5-255-217-91.xlab.si) |
| 07:43.59 | HornyNegress | anyone ever heard that word before? |
| 07:44.01 | *** join/#debian Voovode (~Alex@88.97.18.78) |
| 07:44.05 | *** join/#debian Olufunmilayo (~Olufunmil@unaffiliated/olufunmilayo) |
| 07:44.09 | HornyNegress | it's the feminine form of "nigger" |
| 07:44.14 | jmcnaught | !ops HornyNegress |
| 07:44.15 | dpkg | Hydroxide, dondelelcaro, LoRez, RichiH, mentor, abrotman, Maulkin, stew, peterS, Myon, Ganneff, weasel, zobel, themill, babilen, SynrG, jm_, somiaj, jelly: jmcnaught complains about: HornyNegress |
| 07:44.30 | HornyNegress | !ops jmcnaught |
| 07:44.30 | dpkg | Hydroxide, dondelelcaro, LoRez, RichiH, mentor, abrotman, Maulkin, stew, peterS, Myon, Ganneff, weasel, zobel, themill, babilen, SynrG, jm_, somiaj, jelly: hornynegress complains about: jmcnaught |
| 07:44.39 | HornyNegress | what's the purpose of dpkg? |
| 07:44.48 | *** join/#debian Cabanossi (~Cabanossi@p57995BB5.dip0.t-ipconnect.de) |
| 07:44.52 | *** join/#debian pills (~root@223.230.74.171) |
| 07:44.53 | HornyNegress | seems like a publicly triggerable mass-ping spambot |
| 07:44.54 | *** mode/#debian [+o babilen] by ChanServ |
| 07:44.54 | *** mode/#debian [+b *!*@192.200.120.52] by babilen |
| 07:44.54 | *** kick/#debian [HornyNegress!~babilen@unaffiliated/babilen] by babilen (you should know better) |
| 07:44.59 | *** mode/#debian [-o babilen] by babilen |
| 07:45.04 | babilen | jmcnaught: ta |
| 07:45.22 | *** join/#debian meldron_ (rIIAoxKO4I@bootes.uberspace.de) |
| 07:45.28 | *** join/#debian bnw (~bnw@unaffiliated/bnw) |
| 07:47.03 | *** join/#debian m0j0dj0dj0 (~m0j0dj0dj@unaffiliated/m0j0dj0dj0) |
| 07:48.11 | meldron | hi guys, on my debian jessie system two ethernet interfaces get renamed by udev (eth1->eth3 & wlan0 -> wlan2), does anybody know why this could happen? |
| 07:49.29 | *** join/#debian hplar (~ralph@unable-to-package.org) |
| 07:50.07 | *** join/#debian danwellby (~danwellby@gateway/vpn/privateinternetaccess/danwellby) |
| 07:51.16 | *** join/#debian sumyunseal (~sumyunsea@cpe-108-185-166-234.socal.res.rr.com) |
| 07:51.57 | *** join/#debian yareckonirc (~yareckoni@p4FC0DF04.dip0.t-ipconnect.de) |
| 07:53.08 | *** join/#debian antgel (~topdog@82.166.98.41) |
| 07:53.21 | *** join/#debian CrypticSquared (~CrypticS_@unaffiliated/crypticsquared) |
| 07:55.13 | rudi_s | meldron: persistent-rules? Renamed when? |
| 07:57.29 | *** join/#debian Quatroking (~Quatrokin@507098BE.static.ziggozakelijk.nl) |
| 07:57.58 | *** mode/#debian [+o jelly] by ChanServ |
| 07:57.59 | *** mode/#debian [-b *!*@192.200.120.52] by jelly |
| 07:58.00 | *** mode/#debian [-o jelly] by ChanServ |
| 07:58.25 | jelly | babilen, moved that +b to a more appropriate place |
| 07:59.57 | *** join/#debian Jonwel (~Jonwel@541971C3.cm-5-2b.dynamic.ziggo.nl) |
| 08:00.31 | meldron | rudi_s: thanks found some rules added to /etc/udev/rules.d/010_netinterfaces.rules |
| 08:00.59 | rudi_s | np |
| 08:02.17 | *** join/#debian nast_ (~nast@45.62.248.146) |
| 08:05.17 | *** join/#debian alexlist (~alexlist@bjoerk.list.priv.at) |
| 08:09.23 | *** join/#debian dirae (~rea@41.254.9.199) |
| 08:10.03 | *** join/#debian timahvo1 (~rogue@197.232.18.157) |
| 08:10.30 | *** join/#debian hgnoel1980 (~hgnoel198@host213-123-120-65.in-addr.btopenworld.com) |
| 08:10.31 | *** join/#debian Attoy_ (~attoy@ybox00.ybox.it) |
| 08:10.32 | *** join/#debian Guest75842 (~gg@2a01:e35:2e29:a880:16da:e9ff:feab:d12f) |
| 08:10.37 | Guest75842 | Hello all |
| 08:12.51 | Guest75842 | I would like to install a specific version of openjdk-8-jr_headless (openjdk-8-jre-headless: Installed: 8u111-b14-2~bpo8+1) |
| 08:13.12 | Guest75842 | i added backport default on debian8 |
| 08:13.18 | Guest75842 | but can't found it |
| 08:13.33 | *** join/#debian sca_ebe (~Thunderbi@185.75.141.25) |
| 08:14.50 | petn-randall | ,v openjdk-8-jre-headless |
| 08:14.51 | judd | Package: openjdk-8-jre-headless on amd64 -- jessie-backports: 8u131-b11-1~bpo8+1; buster: 8u131-b11-2; stretch: 8u131-b11-2; sid: 8u131-b11-2 |
| 08:15.14 | *** join/#debian Puggy (~FASDFSF@unaffiliated/fasdfsf) |
| 08:15.19 | petn-randall | Guest75842: You can find a newer version in jessie-backports. |
| 08:16.33 | *** join/#debian m0j0dj0dj0 (~m0j0dj0dj@unaffiliated/m0j0dj0dj0) |
| 08:19.40 | *** join/#debian sca_ebe (~Thunderbi@185.75.141.25) |
| 08:21.40 | *** join/#debian sca_ebe (~Thunderbi@185.75.141.25) |
| 08:21.41 | *** join/#debian Linlz (~Linlz@unaffiliated/linlz) |
| 08:21.43 | *** join/#debian in1t3r_ (~shiva@unaffiliated/lordshiva) |
| 08:21.53 | *** join/#debian dreamon (~dreamon@unaffiliated/dreamon) |
| 08:22.01 | *** join/#debian aruns (~indistylo@122.171.45.8) |
| 08:23.46 | Aebian | ln -s what was the syntax again? <target? <source> right? I tried 'man ln' but its not listed there or I'm to dumb to read the manual lol |
| 08:24.09 | *** join/#debian shiva__ (~shiva@unaffiliated/lordshiva) |
| 08:24.30 | rudi_s | Aebian: src dst |
| 08:25.05 | rudi_s | (The problem is that the TARGET in the man page refers to the link-TARGET, which is where the link will point to.) |
| 08:25.05 | sleepyhead | Aebian: destination is optional |
| 08:25.21 | rudi_s | It helps to think of cp which has the same order of arguments. |
| 08:26.11 | jelly | cp has the opposite order |
| 08:27.05 | jelly | either "ln -s where-to-put-symlink original-path" or just "ln -s original-path" |
| 08:27.09 | *** join/#debian lucad111 (~lucad111@linaro/lucad111) |
| 08:28.05 | jelly | oh, I'm wrong |
| 08:28.06 | Aebian | jelly: rly? I mean cp <S> T<T> 'cp /stuff/to/copy /place/to/store |
| 08:28.22 | petn-randall | it's 'ln -s file-i-want-to-link-to link-i-want-to-create' |
| 08:28.27 | jelly | yes |
| 08:29.21 | *** join/#debian maxwell (~maxwell@ipbcc26c3e.dynamic.kabel-deutschland.de) |
| 08:29.27 | colo-work | can anyone recommend a howto/guide on setting up nfs4 (without kerberos) on Debian Stretch? |
| 08:29.43 | Aebian | ah gotcha so ln -s .irssi/scripts/blabla.pl .irssi/scripts/autorun/blabbla.pl |
| 08:29.46 | Aebian | ok |
| 08:30.36 | jelly | ln -fs ../blabla.pl .irssi/scripts/autorun/blabbla.pl |
| 08:30.53 | jelly | or even (cd .irssi/scripts/autorun; ln -s ../bla<TAB>) |
| 08:31.19 | *** join/#debian timahvo1 (~rogue@197.232.18.157) |
| 08:31.35 | sleepyhead | be careful -f means remove destination files. |
| 08:32.14 | *** join/#debian ghost43 (~daer@gateway/tor-sasl/daer) |
| 08:32.20 | Aebian | yeah I just did it out of ~ so that works fine |
| 08:34.56 | jelly | Aebian, that command would not do what you wanted it to, but |
| 08:34.57 | jelly | ln -s .irssi/scripts/blabla.pl .irssi/scripts/autorun/blabbla.pl |
| 08:35.04 | jelly | lrwxrwxrwx 1 jelly jelly 24 Srp 5 10:34 .irssi/scripts/autorun/blabbla.pl -> .irssi/scripts/blabla.pl |
| 08:35.09 | *** join/#debian vaidik (~vaidik@115.248.81.253) |
| 08:35.34 | *** join/#debian dohfish (~oemillak@85.191.223.6) |
| 08:35.47 | Aebian | hmm I see |
| 08:35.57 | jelly | symlink is dereferenced from its directory, so that would point to .irssi/scripts/autorun/.irssi/scripts/blabla.pl |
| 08:36.30 | Aebian | its not a absolute path |
| 08:36.32 | Aebian | hmm yeah |
| 08:37.34 | *** part/#debian f-a (~f-a@151.48.56.228) |
| 08:37.45 | *** join/#debian bhuddah (~michael@unaffiliated/bhuddah) |
| 08:37.58 | jelly | either an absolute path for source, or correct one relative to destination's directory |
| 08:38.10 | jelly | so... ln -s ../blabla.pl .irssi/scripts/autorun/blabbla.pl |
| 08:39.00 | *** mode/#debian [+l 1674] by debhelper |
| 08:39.44 | *** join/#debian ghost43 (~daer@gateway/tor-sasl/daer) |
| 08:39.50 | Aebian | I just cd'ed into ~/.irssi/scripts/autorun and did a ln -s ../scriptname.pl from there |
| 08:41.33 | *** join/#debian LorD_n1c0w (~rhodan@2804:1b0:f389:2ab8::3) |
| 08:42.56 | *** join/#debian _KaszpiR_ (quasselcor@unaffiliated/kaszpir/x-3157048) |
| 08:43.22 | *** join/#debian tonythomas (uid25971@wikimedia/-01tonythomas) |
| 08:44.43 | *** join/#debian Cabanossi (~Cabanossi@p57995BB5.dip0.t-ipconnect.de) |
| 08:46.07 | *** join/#debian bananadev (~onlyester@117.6.99.240) |
| 08:47.06 | *** join/#debian TheWild (053cff8f@gateway/web/freenode/ip.5.60.255.143) |
| 08:48.05 | *** join/#debian UUID02 (~UUID00@BSN-182-165-79.dynamic.siol.net) |
| 08:49.44 | TheWild | hello |
| 08:50.12 | *** join/#debian enovella (~enovella@188.205.16.19) |
| 08:50.31 | TheWild | my yesterday Debian installation on SD card is finally running after fixing the GRUB under another Linux. |
| 08:51.28 | bolt | congratulations |
| 08:55.00 | *** join/#debian dirae (~rea@41.254.9.199) |
| 08:55.55 | *** join/#debian onee-chan (~onee-chan@213.149.56.130) |
| 08:56.00 | onee-chan | hi |
| 08:56.23 | onee-chan | is Buster gonna get a new kernel any time soon? |
| 08:56.55 | *** join/#debian N3X15 (~Rob@2602:47:d44c:5b00:5059:7ae5:bbde:61d0) |
| 08:57.33 | petn-randall | onee-chan: Probably, but there are no ETAs. |
| 08:57.49 | petn-randall | ,kernels |
| 08:57.51 | judd | Available kernel versions are: experimental: 4.11.0-trunk-686 (4.11.3-1~exp1); sid: 4.11.0-1-686 (4.11.6-1); buster: 4.11.0-1-686 (4.11.6-1); stretch: 4.9.0-3-686 (4.9.30-2+deb9u2); jessie-backports: 4.9.0-0.bpo.3-686 (4.9.30-2~bpo8+1); jessie: 3.16.0-4-686-pae (3.16.43-2+deb8u2); wheezy-backports: 3.16.0-0.bpo.4-686-pae (3.16.39-1+deb8u1~bpo70+1); wheezy: 3.2.0-4-686-pae |
| 08:57.51 | judd | (3.2.89-2) |
| 08:58.13 | TheWild | hell, Debian worked for a while and crashed to completely black screen, without blinking cursor. Sometimes it reads/writes something to SD card. |
| 08:58.40 | onee-chan | amd64 is still on kernel 4.9 |
| 09:00.01 | *** join/#debian moetunes (~Jean-luc@61.68.71.118) |
| 09:00.13 | meldron | hey guys anybody else with gdm black screen after lockout (i tried with different window manager: gnome, i3)? |
| 09:00.33 | *** join/#debian ralpheeee (~ralpheeee@gateway/vpn/privateinternetaccess/ralpheeee) |
| 09:00.55 | petn-randall | onee-chan: I see 4.11 there. |
| 09:01.32 | *** join/#debian evilman_work (~evilman@87.244.6.228) |
| 09:01.39 | onee-chan | https://packages.debian.org/search?keywords=linux-image-amd64 |
| 09:01.40 | meldron | forgot to mention i am running jessie |
| 09:02.05 | *** join/#debian gratcy (~quassel@182.253.73.30) |
| 09:02.07 | *** join/#debian TomasCZ (~TomasCZ@yes.tenlab.net) |
| 09:02.12 | *** join/#debian vaidik (~vaidik@115.248.81.253) |
| 09:02.31 | *** join/#debian notebox (~textual@82.197.136.118) |
| 09:02.43 | *** join/#debian cwood (~user@static-b2-72.highspeed.eol.ca) |
| 09:03.11 | cwood | jessie->stretch |
| 09:03.31 | TheWild | going to console via Ctrl+Alt+F3, logging in, doing stuff then typing exit crashes the system. What the...? Is that intentional? |
| 09:04.07 | *** join/#debian f4cl3y (~f4cl3y@unaffiliated/f4cl3y) |
| 09:04.46 | *** join/#debian davimore (~davimore@185.143.230.224) |
| 09:04.52 | jmcnaught | TheWild: crashes the system, like it reboots? |
| 09:05.46 | TheWild | no, previously it completely hung the system; this time hung, but I was able to gracefully shut it down by power button. |
| 09:06.17 | jmcnaught | TheWild: you are unable to switch to other virtual consoles? |
| 09:06.25 | TheWild | yup |
| 09:06.36 | *** join/#debian phinxy (~tehhhd@unaffiliated/phinxy) |
| 09:06.36 | bolt | TheWild: are you sure your sd card is good? |
| 09:06.40 | *** join/#debian kneekoo__ (~Nicu@p2E5B84D0.dip0.t-ipconnect.de) |
| 09:06.48 | *** join/#debian The_Loko (~The_Loko@152.red-83-61-214.dynamicip.rima-tde.net) |
| 09:06.48 | boser | !info |
| 09:07.01 | *** join/#debian gratcy (~quassel@182.253.73.30) |
| 09:07.04 | jmcnaught | TheWild: can you find anything about it in /var/log/syslog after you reboot? |
| 09:07.42 | *** part/#debian gratcy (~quassel@182.253.73.30) |
| 09:07.49 | *** join/#debian gratcy (~quassel@182.253.73.30) |
| 09:09.00 | *** mode/#debian [+l 1685] by debhelper |
| 09:09.32 | *** join/#debian pesho (5eecf385@gateway/web/cgi-irc/kiwiirc.com/ip.94.236.243.133) |
| 09:09.35 | bolt | jmcnaught: in the case of a possibly bad card, having logs elsewhere is golden. either remote rsyslogging or a usb stick for logs |
| 09:09.42 | bolt | TheWild: --^ |
| 09:09.44 | bolt | oops |
| 09:09.48 | pesho | Hello |
| 09:10.04 | *** join/#debian nast_ (~nast@45.62.248.146) |
| 09:10.06 | bolt | !greet pesho |
| 09:10.06 | dpkg | G'day, pesho |
| 09:10.28 | pesho | With who I need to talk about Verifying authenticity of Debian CDs? |
| 09:10.52 | jmcnaught | what about it? |
| 09:11.37 | TheWild | quite hard to read the syslog having just cat, tail and nano |
| 09:11.41 | pesho | jmcnaught there is options to verify in the Debian's site but not a single instruction how to do it |
| 09:11.45 | TheWild | but I can't spot any seriuos errors |
| 09:11.57 | *** join/#debian RalphBa (~RalphBa@a.ralphs-tech.com) |
| 09:11.57 | bolt | pesho: https://www.debian.org/CD/verify |
| 09:12.06 | *** join/#debian remi_ (~remi@orage.inrialpes.fr) |
| 09:12.57 | pesho | bolt THis is what I mena |
| 09:13.12 | pesho | I read it but I don't know how to do it |
| 09:14.32 | pesho | With who I need to talk about to ask to instruct me how to do the check? |
| 09:14.36 | bolt | pesho: it tells you to use sha256sum or sha512sum |
| 09:14.45 | bolt | pesho: those tools are pretty self explanatory |
| 09:14.50 | *** part/#debian gratcy (~quassel@182.253.73.30) |
| 09:14.54 | *** join/#debian littlekitty (uid234006@gateway/web/irccloud.com/x-befgflmtpefwsjuh) |
| 09:14.59 | *** join/#debian gratcy (~quassel@182.253.73.30) |
| 09:15.14 | bolt | pesho: feed them your iso or the path to your dvdrom with the disc in it |
| 09:15.15 | *** join/#debian err404 (~err404@163.172.158.42) |
| 09:15.36 | pesho | bolt I'm on Windows 7 and I don't know how to perform sha256sum or sha512sum |
| 09:16.08 | bolt | pesho: you can use powershell's Get-FileHash |
| 09:16.16 | bolt | pesho: ..or cygwin |
| 09:16.35 | bolt | pesho: or any tool google shows you for sha256sum windows. i'm sure someone compiled it. |
| 09:16.52 | pesho | bolt I know what is powershell but I don't know cygwin. Did I need to download cygwin |
| 09:17.06 | bolt | pesho: powershell will do fine |
| 09:17.41 | *** join/#debian OxOO (~OxOO@unaffiliated/0x00/x-2817549) |
| 09:17.51 | pesho | bolt so I need to type in powershell bar............ Get-FileHash nameofiso.iso |
| 09:18.17 | bolt | pesho: get-help get-filehash |
| 09:18.29 | venkat_330 | pesho: https://msdn.microsoft.com/en-us/powershell/reference/5.1/microsoft.powershell.utility/get-filehash |
| 09:18.34 | bolt | pesho: powershell is kind of out of the scope of this channel though. and google would help you. |
| 09:20.09 | pesho | Thank you. bolt venkat_330 Aftre I get the sum I need to compare it with what? |
| 09:20.22 | sleepyhead | pesho: with the value in the SHA256SUMS file |
| 09:20.33 | bolt | pesho: https://www.debian.org/CD/verify |
| 09:20.35 | sleepyhead | pesho: you also have to check the gpg sig of that file. |
| 09:20.35 | pesho | Thank you |
| 09:20.39 | bolt | pesho: it tells you the sums are right next to the images |
| 09:20.44 | sleepyhead | pesho: now that'll be fun on Windows |
| 09:20.51 | bolt | cygwin :) |
| 09:20.56 | OxOO | I'm considering buying this laser printer "HP LaserJet Pro M402dne" ( http://m.hp.com/ie/en/products/printers/product-detail.do?oid=11544736 ). Specs says it is compatible with "DEBIAN (6.0, 6.0.1, 6.0.2, 6.0.3, 6.0.4, 6.0.5, 6.0.6, 6.0.7, 6.0.8, 6.0.9, 6.0.10, 7.0, 7.1, 7.2, 7.3, 7.4, 7.5, 7.6)". Do you guys think it will work ok with debian stable? |
| 09:21.04 | sleepyhead | OxOO: yep |
| 09:21.15 | sleepyhead | OxOO: hp printers have excellent linux compatibility |
| 09:21.32 | pesho | bolt Did I need to download cygwin? sleepyhead I don't know how to check the gpg |
| 09:21.34 | OxOO | :-). awesome. thanks sleepyhead |
| 09:22.00 | sleepyhead | pesho: google "checking gpg sig on windows" |
| 09:22.12 | pesho | sleepyhead ok |
| 09:22.37 | bolt | pesho: not that security isn't a good thing, but why are you so concerned about the images? did you verify the checksums of your windows image after grabbing it from msdn or wherever? |
| 09:22.42 | sleepyhead | pesho: you don't need cygwin btw |
| 09:22.55 | sleepyhead | bolt: those are delivered over ssl |
| 09:22.55 | *** join/#debian dirae (~rea@41.254.9.199) |
| 09:23.08 | sleepyhead | bolt: and ms doesn't publish the checksums so you can't do that even if you wanted to |
| 09:23.27 | bolt | sleepyhead: i've seen checksums on msdn i believe |
| 09:23.41 | pesho | bolt If it wasn't important I won't go to Debian instead to stay on WIndows |
| 09:23.48 | pesho | sleepyhead ok |
| 09:23.51 | sleepyhead | bolt: ok then i'm wrong there. you can actually just download teh windows iso. anyone can. it's free |
| 09:24.00 | sleepyhead | bolt: i mean even if you don't have msdn access |
| 09:24.12 | *** join/#debian peterbec` (~peterbeci@75-142-96-216.static.mtpk.ca.charter.com) |
| 09:24.22 | bolt | sleepyhead: also, ssl is no guarantee the image hasn't been tampered with. it just kind of insures you're not having a man in the middle. |
| 09:24.50 | *** join/#debian jackNemrod_ (~Thunderbi@217.74.105.4) |
| 09:24.57 | bolt | that is if your root certs are up to date and none have been stolen without people finding out about it |
| 09:25.03 | sleepyhead | bolt: it's the best you can do with a windows image. like i said if you download it from microsoft (not msdn) then you don't get checksums or gpg sigs. you only have the ssl guarantee. |
| 09:25.21 | sleepyhead | bolt: my root certs are not secret |
| 09:25.37 | sleepyhead | bolt: they come with the OS and the browser. |
| 09:26.27 | sleepyhead | bolt: btw ssl connections are encrypted so they can't be tampered with in transit. they could have been tampered with at MS' end though. |
| 09:26.53 | *** join/#debian Madda (~Madda@host160-233-dynamic.244-95-r.retail.telecomitalia.it) |
| 09:27.02 | bolt | sleepyhead: i mean that no root ca's have had their private keys stolen |
| 09:27.21 | bolt | sleepyhead: and if they had, you could perfectly well tamper with an ssl connection |
| 09:27.40 | bolt | sleepyhead: ..which is why you have to have up to date root certs and hope none have been stolen |
| 09:27.56 | *** join/#debian humbot (~i@unaffiliated/humbag) |
| 09:28.19 | sleepyhead | bolt: i rely on OS vendor to handle that |
| 09:28.33 | bolt | sleepyhead: many people do |
| 09:29.16 | bolt | sleepyhead: several browsers use their own stores though, so if you're downloading via one of those, the os vendor has no say in the matter |
| 09:29.27 | *** join/#debian treegor (~gary@bzq-82-81-213-77.cablep.bezeqint.net) |
| 09:29.47 | *** join/#debian Cabanossi (~Cabanossi@p57995BB5.dip0.t-ipconnect.de) |
| 09:29.55 | sleepyhead | bolt: i use linux so the OS vendor provides me with the browser and updates to it too |
| 09:30.27 | bolt | sleepyhead: let's hope they know about any stolen root certificate then :) |
| 09:31.07 | *** join/#debian th0r (~th0r@65.131.231.48) |
| 09:32.09 | pesho | bolt things are like that |
| 09:33.04 | *** join/#debian f10 (~flo@ip5b40643f.dynamic.kabel-deutschland.de) |
| 09:33.06 | pesho | bolt vendors should do the job because not everybody knows everything and it's impossible for most part of the population |
| 09:34.00 | bolt | i know they're like that. but it was argued that ssl connections implied security, and i wanted to raise a few counter points. |
| 09:34.12 | *** join/#debian betandr (~betandr@132.185.158.36) |
| 09:34.19 | pesho | users which are concerned about that hope that vendors did the job |
| 09:34.43 | pesho | bolt nothing is secure until somebody check it. |
| 09:35.29 | pesho | even ssl. Sorry for the decomposed comment |
| 09:35.42 | *** join/#debian anao2 (~anao@p57A1339D.dip0.t-ipconnect.de) |
| 09:35.45 | onee-chan | nothing is secure |
| 09:36.01 | bolt | --^ |
| 09:36.33 | *** join/#debian electro33 (uid613@gateway/web/irccloud.com/x-xwxpyyhsavkgrewm) |
| 09:36.48 | onee-chan | Unless perhaps you bury your pc under 2m of concrete. |
| 09:37.31 | bolt | that doesn't work to keep fibre cables out of harm's way, so i doubt it would help a pc |
| 09:38.02 | pesho | I asked about checking the integrity because this is the way to check for man in the middle. In other words did somebody change the iso while it coming to you |
| 09:38.25 | onee-chan | And that is cool. |
| 09:39.44 | pesho | If downloade iso is that you ask to download it means it isn't changed not iso is secure |
| 09:40.00 | bolt | sub-zero, even |
| 09:40.20 | pesho | I don't know what is sub zero |
| 09:40.31 | *** join/#debian remo (~user@d0-138.ltk.com.ua) |
| 09:40.42 | bolt | generally cooler than cool |
| 09:40.49 | *** join/#debian randombrein (~textual@81.215.201.125) |
| 09:40.59 | pesho | :D ok |
| 09:42.49 | *** join/#debian nvz (~user@unaffiliated/jscoder) |
| 09:43.34 | *** join/#debian Aebian (~Aebian@unaffiliated/aebian) |
| 09:44.25 | *** join/#debian spinbee (spinbee@modemcable176.93-203-24.mc.videotron.ca) |
| 09:45.21 | pesho | if there is still somebody who knows more than me about Debian gpg and checking it a qustion to him or to them. If I'm going to check gpg with what compare it? |
| 09:45.30 | *** join/#debian RalphBa (~RalphBa@a.ralphs-tech.com) |
| 09:45.55 | *** join/#debian Aebian (~Aebian@unaffiliated/aebian) |
| 09:47.22 | *** join/#debian zOthix (~zOthix@39.41.148.131) |
| 09:48.17 | Iridos | that's bizarre. I cannot see any images on http://dell.com with the firefox in jessie ⦠e.g. http://i.dell.com/images/global/brand/ui/logo-wt-bl.png seems to be forwarded to https://a248.e.akamai.net/f/1058/5566/8/i.dell.com/images/global/brand/ui/logo-wt-bl.png where I get an "access denied" |
| 09:48.28 | Iridos | the page loads fine in chromium, though |
| 09:48.50 | sleepyhead | pesho: i don't know how it's done in windows but i do know how gpg works so if you have a question you should just ask. |
| 09:49.01 | Iridos | I've also tried a 2nd FF profile that I rarely use for testing with the same result |
| 09:49.08 | *** join/#debian ShockingIsntIt (~ShockingI@ip68-0-178-69.tc.ph.cox.net) |
| 09:49.55 | sleepyhead | Iridos: maybe they've blocked your IP address user agent combo. that's why it works with chromium and not with firefox |
| 09:50.08 | sleepyhead | Iridos: use one of those user agent string modification addons in firefox. or a proxy. |
| 09:50.19 | pesho | sleepyhead you told me to not only check shasum but even gpg. I google what you said and I find a program but if this program shows something I'd need to compare it with something |
| 09:51.04 | Iridos | I switched user agent to the one of chromium and that doesn't change anything |
| 09:51.18 | sleepyhead | Iridos: well it was just a theory |
| 09:51.25 | Iridos | anyway, why would they do that |
| 09:51.36 | *** join/#debian th0r (~th0r@65.131.231.48) |
| 09:51.50 | sleepyhead | Iridos: because the last person who got your IP did something malicious. Does your ISP assign IPs dynamically from a pool? |
| 09:52.17 | Iridos | my IP is static |
| 09:52.23 | sleepyhead | Iridos: good for you. |
| 09:52.32 | sleepyhead | Iridos: carry on. i'm out of ideas. |
| 09:52.33 | Iridos | work pc at university |
| 09:53.16 | Iridos | well, someone could try dell.com with firefox in jessie from somewhere else |
| 09:53.23 | sleepyhead | pesho: idk what to say. you add the debian signing key to your key ring. then you run gpg on the signature for that sha256sum file. if it says the sig was good then you are ok. |
| 09:53.41 | sleepyhead | pesho: i'm honestly not sure how you would do that on windows. you really need to learn to google this stuff. |
| 09:55.04 | *** join/#debian czesmir (~stefan@dcd209.neoplus.adsl.tpnet.pl) |
| 09:55.26 | Iridos | hm, maybe I should upgrade, there's a newer one |
| 09:55.37 | pesho | sleepyhead I go to https://keyring.debian.org/ but I don't find signing key of Debian |
| 09:56.14 | sleepyhead | pesho: forget about it mate. just post the iso name and the sha256sum you got here. i will check it and tell you if its correct. happy? |
| 09:56.58 | *** join/#debian err404 (~err404@163.172.158.42) |
| 09:57.58 | pesho | yes but only if you're still online because this machine is laptop and laptop doesn't have a chance to burn. So I need to wait a family member to get out of the desktop pc to sit and to burn |
| 09:58.12 | *** join/#debian err404 (~err404@163.172.158.42) |
| 09:58.14 | *** join/#debian mdorenka (~mdorenka@unaffiliated/mdorenka) |
| 09:58.26 | sleepyhead | pesho: sorry i can't help you with this. maybe somebody else has experience with windows and gpg. |
| 09:58.27 | *** join/#debian RalphBa (~RalphBa@a.ralphs-tech.com) |
| 09:58.48 | pesho | sleepyhead if you're not online according to me I'd do a magic if I made everything |
| 09:59.12 | *** join/#debian Older_Dog (~don@h87.103.17.98.dynamic.ip.windstream.net) |
| 09:59.34 | *** join/#debian OS-30315 (~OS-30315@46.102.245.202) |
| 09:59.49 | *** join/#debian Cabanossi (~Cabanossi@p57995BB5.dip0.t-ipconnect.de) |
| 10:00.03 | *** join/#debian v01t (~v01t@p4FE44AFB.dip0.t-ipconnect.de) |
| 10:00.06 | pesho | sleepyhead ok. If I don't find anybody I'll try with magic |
| 10:00.20 | sleepyhead | pesho: the key is this one: DF9B 9C49 EAA9 2984 3258 9D76 DA87 E80D 6294 BE9B |
| 10:00.51 | pesho | sleepyhead thank you for that |
| 10:01.12 | sleepyhead | pesho: if you were using linux it would simply be a case of grabbing teh key like this: `gpg --recv-keys 0xDF9B9C49EAA9298432589D76DA87E80D6294BE9B` |
| 10:01.35 | sleepyhead | pesho: then you verify the SHA256SUM file like this `gpg --verify SHA256SUMS.sign SHA256SUMS.txt` |
| 10:01.56 | sleepyhead | pesho: obviously you need to download SHA256SUM.txt and SHA256SUMS.sign first |
| 10:02.17 | sleepyhead | pesho: non of this helps you on windows though because like i said a million times already I HAVE NO CLUE HOW WINDOWS WORKS |
| 10:02.24 | *** join/#debian cyphase (~cyphase@unaffiliated/cyphase) |
| 10:02.33 | *** part/#debian OS-30315 (~OS-30315@46.102.245.202) |
| 10:02.38 | *** join/#debian Texou (~Texou@unaffiliated/texou) |
| 10:02.42 | th0r | sleepyhead, have they fixed it? does windows work now? |
| 10:02.53 | sleepyhead | th0r: i'm sure it does. just not for me |
| 10:03.40 | pesho | sleepyhead according to me even some of the programers in Microsoft don't know how windows works. I'm not a linux user and I'll made my first steps with Debian. |
| 10:03.59 | *** join/#debian strk (~strk@unaffiliated/strk) |
| 10:04.09 | strk | where's the default password for mariadb database ? |
| 10:04.11 | pesho | sleepyhead Are you an Debian user? |
| 10:04.28 | sleepyhead | pesho: no i use opensuse |
| 10:04.34 | pesho | thor windows is going from worse to worse |
| 10:04.46 | sleepyhead | pesho: i use debian on my vps though |
| 10:04.51 | Ke | strk: no password, if you connect as root |
| 10:05.11 | pesho | sleepyhead WHat is vps? |
| 10:05.25 | sleepyhead | pesho: it's a slice of the resources of a larger computer |
| 10:05.33 | sleepyhead | pesho: a slice of a server's resources |
| 10:05.45 | onee-chan | I remember hearing some ranting suipposed Windows developer about how bad the windows codebase is on some IRC... |
| 10:06.08 | *** join/#debian RalphBa (~RalphBa@a.ralphs-tech.com) |
| 10:06.10 | *** join/#debian cyphase (~cyphase@unaffiliated/cyphase) |
| 10:06.31 | pesho | sleepyhead clear. I saw that Debian and openSUSE are for advenced users but Ubuntu isn't better according to me |
| 10:06.31 | Ke | onee-chan: any big codebase contains stuff that should not see the light of day |
| 10:07.54 | sleepyhead | pesho: opensuse is actually pretty user friendly. i wouldn't say it is for advanced users. it's a desktop distro. |
| 10:08.10 | *** join/#debian cyphase (~cyphase@unaffiliated/cyphase) |
| 10:09.06 | onee-chan | Ke true, but if what he said is correct, then their whole workflow is destroyed because of their overengineered codebase. |
| 10:09.50 | pesho | onee-chan I heared from an exemployee of windows that windows isn't focused to make the operating system better for users but focused on take as much money as microsoft can from users of windows and other microsoft products |
| 10:10.09 | strk | Ke: doesn't look like it, but --defaults-file=/etc/mysql/debian.cnf works fine |
| 10:10.39 | onee-chan | pesho ofc. that is true. |
| 10:11.15 | zOthix | what is a frame pointer? |
| 10:11.20 | *** join/#debian dselect (~dselect@unaffiliated/themill/bot/dselect) |
| 10:12.02 | *** join/#debian raynold (uid201163@gateway/web/irccloud.com/x-bxficazgorsfcyyt) |
| 10:12.27 | *** join/#debian cyphase (~cyphase@unaffiliated/cyphase) |
| 10:12.40 | bolt | zOthix: a copy of the stack pointer for the frame below |
| 10:12.50 | bolt | zOthix: the return address |
| 10:13.08 | zOthix | ouh, thanks! |
| 10:13.09 | *** join/#debian Delta-One (~zero@2001:2002:51e2:7ba1:6391:acc7:b55f:c617) |
| 10:14.29 | *** join/#debian cyphase (~cyphase@unaffiliated/cyphase) |
| 10:15.17 | *** join/#debian dirae (~rea@41.254.9.247) |
| 10:15.20 | *** join/#debian tymczenko (~tymczenko@unaffiliated/tymczenko) |
| 10:16.58 | *** join/#debian cyphase (~cyphase@unaffiliated/cyphase) |
| 10:18.20 | *** join/#debian RalphBa (~RalphBa@a.ralphs-tech.com) |
| 10:18.32 | *** join/#debian fnlkj (~fnlkj@vps-16.205.170.217.stwvps.net) |
| 10:19.55 | *** join/#debian HeOS (~heos@46.52.179.186) |
| 10:21.05 | *** join/#debian nils_ (~nils_@pdpc/supporter/35for7/nils) |
| 10:23.17 | *** join/#debian _bsurfer (~bsurfer@131.228.2.20) |
| 10:24.20 | *** join/#debian j08nY (~j08nY@31.170.82.41) |
| 10:24.28 | *** join/#debian Tiffon (~name@unaffiliated/tiff0n) |
| 10:26.28 | *** join/#debian xk (~xk@60.222.143.233) |
| 10:26.49 | *** join/#debian jackNemrod_ (~Thunderbi@217.74.105.4) |
| 10:27.28 | xk | debian 9 is a mature version, but there's a serious problem. firefox is messed up. |
| 10:27.35 | xk | I just found that out |
| 10:27.43 | *** join/#debian RalphBa (~RalphBa@a.ralphs-tech.com) |
| 10:27.56 | petn-randall | !ask |
| 10:27.56 | dpkg | If you have a question, just ask! For example: "I have a problem with ___; I'm running Debian version ___. When I try to do ___ I get the following output ___. I expected it to do ___." Don't ask if you can ask, if anyone uses it, or pick one person to ask. We're all volunteers; make it easy for us to help you. If you don't get an answer try a few hours later or on debian-user@lists.debian.org. See <smart questions><errors>. |
| 10:28.18 | petn-randall | xk: Can you describe the problem? See above. ^^^ |
| 10:28.18 | *** join/#debian awal1 (~awal1@197.113.20.37) |
| 10:28.41 | *** join/#debian bazquxer (~bazquxer@gateway/tor-sasl/bazquxer) |
| 10:28.49 | *** join/#debian mzf (~mzf@unaffiliated/mzf) |
| 10:30.12 | xk | petn-randall, it chews lots of swap spaces and sometimes stucks for seconds, and sometimes freezes, and there's no refresh button, but after I downloaded ff from their site all of the problems have gone. |
| 10:30.57 | xk | you know what's like when swap spaces are being used, I at first thought my harddrive is dying. |
| 10:31.06 | *** join/#debian [HeOS] (~heos@46.52.179.186) |
| 10:31.17 | petn-randall | xk: I can't reproduce any of those issues, and I'm running stretch with firefox. |
| 10:31.22 | petn-randall | !bat |
| 10:31.22 | dpkg | In order to troubleshoot your problem with apt-get, apt or aptitude we need ALL OF THE FOLLOWING information: 1. complete output of your apt-get/apt/aptitude run (including the command used) 2. output from "apt-cache policy pkg1 pkg2..." for ALL packages mentioned ANYWHERE in the problem, and 3. "apt-cache policy". Use http://paste.debian.net/ to provide us with this information. Also ask me about <localized errors>. |
| 10:32.13 | petn-randall | xk: Can you provide the info above? Steps 2+3, with 'firefox-esr' as the package. |
| 10:32.19 | *** join/#debian notebox (~textual@82.197.136.118) |
| 10:32.26 | xk | petn-randall, really? maybe because you have a bigger memory. but for me, that's the case. original ff is better than pre-installed one. |
| 10:33.38 | xk | hey I m not whining or blaming for something, I m just saying this so that maybe you can pay attention and make it better. |
| 10:34.47 | xk | petn-randall, I already purged firefox-esr. |
| 10:35.02 | *** join/#debian fyrril (~fyrril@2605:a601:7014:1800:1df:f424:2778:ffa1) |
| 10:35.35 | petn-randall | xk: How can we make it better if we don't have anything to debug on? |
| 10:35.39 | xk | and I really appreciate all the hard work debian developers have done |
| 10:36.14 | xk | petn-randall, well but why do any changes to ff then ? |
| 10:36.48 | petn-randall | xk: Did you check if there are any? |
| 10:37.12 | xk | petn-randall, yeah, like I said, there's no refresh button on the troublehsooting page. |
| 10:38.02 | *** join/#debian XXOOXX (~XXOOXX@58.22.114.50) |
| 10:39.02 | xk | I m sorry maybe this is inapproporate for me to say this at here. I just got excited to solve the very annoying problem of my own. I mean no offense at all |
| 10:39.20 | xk | inappropriate |
| 10:40.15 | xk | sometimes I m really stupid. |
| 10:40.25 | xk | pls forgive me. |
| 10:40.37 | *** join/#debian [HeOS] (~heos@95.131.181.74) |
| 10:40.53 | xk | see you guys. |
| 10:42.04 | *** join/#debian shtrb (~shtrb@unaffiliated/shtrb) |
| 10:42.13 | petn-randall | xk: I'm pretty sure the refresh button is also missing in upstream Firefox ESR. I would be surprised if Debian patched that out. |
| 10:43.42 | *** join/#debian eshlox (uid44222@gateway/web/irccloud.com/x-ffdtoefqqnsjpiya) |
| 10:44.43 | *** join/#debian Cabanossi (~Cabanossi@p57995BB5.dip0.t-ipconnect.de) |
| 10:44.59 | missmbob | i'm not sure debian would be *allowed* to. we can do minor things but i think that'd be too much |
| 10:45.04 | *** join/#debian notebox (~textual@82.197.136.118) |
| 10:45.43 | *** join/#debian danwellby-1 (~danwellby@gateway/vpn/privateinternetaccess/danwellby) |
| 10:45.52 | *** join/#debian err404 (~err404@163.172.158.42) |
| 10:48.15 | *** join/#debian television (~alex@unaffiliated/arexr) |
| 10:48.35 | *** join/#debian Ericounet (~Eric@2a01:e0a:54:c220:24ab:10ab:2532:1a35) |
| 10:51.56 | *** join/#debian killian99 (~killian99@jol13-4-78-235-25-248.fbx.proxad.net) |
| 10:54.49 | *** join/#debian turfal (~Thunderbi@27.red-213-97-245.staticip.rima-tde.net) |
| 10:55.21 | *** join/#debian mibo (~mibo@ip-89-103-85-113.net.upcbroadband.cz) |
| 10:58.31 | *** join/#debian sh00p (~z@84.216.39.31) |
| 10:59.55 | *** join/#debian Unline (~Unline@gateway/tor-sasl/unline) |
| 10:59.59 | *** join/#debian notebox (~textual@82.197.136.118) |
| 11:00.31 | *** join/#debian Nawab (~OtakuSenp@unaffiliated/otakusenpai) |
| 11:01.00 | *** join/#debian czesmir (~stefan@dcd209.neoplus.adsl.tpnet.pl) |
| 11:02.05 | *** join/#debian BCMM (~BCMM@unaffiliated/bcmm) |
| 11:05.05 | *** join/#debian Lowl3v3l (~lowl3v3l@dslb-088-073-235-011.088.073.pools.vodafone-ip.de) |
| 11:05.21 | *** join/#debian woyzeck_ (~woyzeck@2804:14c:f286:1070:2e1f:bc80:9205:4b38) |
| 11:05.24 | *** join/#debian sondr3 (~sondr3@2a01:79d:b7dd:e4e8:f09f:15e2:272f:d546) |
| 11:05.44 | *** join/#debian dpkg (~dpkg@unaffiliated/dpkg) |
| 11:06.04 | *** join/#debian optimus (optimus@optimus.science) |
| 11:08.57 | *** join/#debian _bsurfer (~bsurfer@131.228.2.20) |
| 11:09.00 | *** mode/#debian [+l 1692] by debhelper |
| 11:10.18 | *** join/#debian MrCoffee (~glen@unaffiliated/ridout) |
| 11:10.29 | *** join/#debian Tempesta (Tempesta@unaffiliated/tempesta) |
| 11:15.12 | *** join/#debian llucenic_ (~Thunderbi@rev-185-22-215-103.radiolan.sk) |
| 11:16.25 | *** join/#debian spuz (~spuz@90.199.218.80) |
| 11:16.32 | *** join/#debian fmerges (~fmerges@161.72.100.50) |
| 11:17.32 | *** join/#debian MewMewMaLazerBea (~imew@222-153-253-126.jetstream.xtra.co.nz) |
| 11:17.45 | *** join/#debian MewMewMaLazerBea (~imew@unaffiliated/mewmewmalazerbea) |
| 11:18.01 | *** part/#debian Son0fFlynn (~imew@unaffiliated/mewmewmalazerbea) |
| 11:18.34 | *** join/#debian ksft (~k@wikipedia/KSFT) |
| 11:18.45 | *** join/#debian fmerges (~fmerges@161.72.100.50) |
| 11:18.51 | *** join/#debian kaimo (~kaimo@host86-177-254-101.range86-177.btcentralplus.com) |
| 11:18.56 | *** join/#debian kongkong (~atomic@221.192.179.55) |
| 11:19.22 | *** join/#debian dirae (~rea@41.254.9.247) |
| 11:21.48 | *** join/#debian astrofog (~astrofog@unaffiliated/astrofog) |
| 11:22.08 | *** join/#debian kryptoz (~kryptoz@49.207.60.194) |
| 11:23.30 | *** part/#debian metaphysician (~meta-code@unaffiliated/meta-coder) |
| 11:24.02 | *** join/#debian theraspberry (~theraspbe@unaffiliated/theraspberry) |
| 11:24.03 | *** join/#debian xormor (~xormor@unaffiliated/xormor) |
| 11:25.02 | *** join/#debian peterbec` (~peterbeci@75-142-96-216.static.mtpk.ca.charter.com) |
| 11:25.05 | venkat_330 | how to disable keyring, I am sure keyring daemon is not running. When i execute GKSU it pops "remember password" , I want to disable both remember password and save to key ring feature. Request some guidance |
| 11:25.26 | *** join/#debian kedare (~kedare@hq.lodgify.net) |
| 11:29.49 | *** join/#debian f0ff (~f0ff@unaffiliated/f0ff) |
| 11:29.51 | *** join/#debian RalphBa (~RalphBa@a.ralphs-tech.com) |
| 11:31.22 | *** join/#debian Unline (~Unline@gateway/tor-sasl/unline) |
| 11:35.36 | bnw | Seems this bug has not been fixed, d-i preseed broken with apt-cacher-ng mirror: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=642159 |
| 11:35.37 | judd | Bug http://bugs.debian.org/642159 in choose-mirror (open, d-i): «debian-installer preseed broken with apt-cacher-ng mirror»; severity: normal; opened: 2011-09-19; last modified: 2013-12-10. |
| 11:35.48 | *** join/#debian RalphBa (~RalphBa@a.ralphs-tech.com) |
| 11:35.50 | *** join/#debian nvz (~user@unaffiliated/jscoder) |
| 11:36.48 | *** join/#debian BluesKaj (~Blues@gateway/vpn/privateinternetaccess/blueskaj) |
| 11:37.12 | BluesKaj | Howdy folks |
| 11:40.26 | *** join/#debian frozenrouter (~andrew@cpc105074-sgyl40-2-0-cust124.18-2.cable.virginm.net) |
| 11:41.11 | *** join/#debian Elirips (~Elirips@178.22.109.242) |
| 11:41.33 | *** join/#debian nvz (~user@unaffiliated/jscoder) |
| 11:42.26 | *** join/#debian ChunkzZ (uid233645@gateway/web/irccloud.com/x-xsimmfmfhbnjbumk) |
| 11:43.19 | *** join/#debian forcerecon (~quassel@gateway/tor-sasl/forcerecon) |
| 11:43.58 | *** join/#debian ChunkzZ (uid233645@unaffiliated/chunkzz) |
| 11:43.58 | *** join/#debian ChunkzZ (uid233645@gateway/web/irccloud.com/x-xsimmfmfhbnjbumk) |
| 11:44.46 | *** join/#debian __marco (~marco@2001:7e8:c80d:e600:e6a4:71ff:fef2:bce6) |
| 11:44.55 | *** join/#debian Cabanossi (~Cabanossi@p57995BB5.dip0.t-ipconnect.de) |
| 11:45.10 | *** join/#debian RebelCoder (~Yuriy@5.134.222.156) |
| 11:45.17 | *** join/#debian Eryn_1983_FL (~Eryn_1983@50-89-157-130.res.bhn.net) |
| 11:47.27 | *** join/#debian fghjb3567 (~Mutter@153.101.71.72) |
| 11:47.48 | *** join/#debian Geekologist (~geek@207.154.216.115) |
| 11:47.58 | *** join/#debian fghjb3567 (~Mutter@153.101.71.72) |
| 11:48.34 | *** join/#debian vaidik (~vaidik@115.248.81.253) |
| 11:49.00 | *** mode/#debian [+l 1700] by debhelper |
| 11:50.14 | *** join/#debian m0j0dj0dj0 (~m0j0dj0dj@unaffiliated/m0j0dj0dj0) |
| 11:50.49 | *** join/#debian earthundead (~earthunde@188.170.80.104) |
| 11:52.57 | *** join/#debian __C_P__ (~aaa@193.159.171.205) |
| 11:53.20 | *** join/#debian tymczenko (~tymczenko@unaffiliated/tymczenko) |
| 11:54.24 | *** join/#debian dasher00 (~dasher00@185.23.213.22) |
| 11:55.03 | *** join/#debian atmosx (~lnx@ec2-35-156-12-142.eu-central-1.compute.amazonaws.com) |
| 11:55.41 | *** join/#debian spuz (~spuz@host-78-145-17-162.as13285.net) |
| 11:57.06 | *** join/#debian kryptoz (~kryptoz@49.207.60.194) |
| 12:00.27 | *** join/#debian zamuro (~Samantha@8.red-212-170-62.staticip.rima-tde.net) |
| 12:00.28 | *** join/#debian zamuro (~Samantha@unaffiliated/zamuro) |
| 12:01.19 | awal1 | how to emulate middle mouse button clic on touchpad? |
| 12:01.56 | awal1 | i tried a few stuff with synclient but no luck |
| 12:01.56 | *** join/#debian Madda (~Madda@host160-233-dynamic.244-95-r.retail.telecomitalia.it) |
| 12:01.59 | sonOfRa | awal1: My touchpad has buttons, and if I click the left AND right button at the same time, that sends a middle click |
| 12:02.13 | shtrb | you can confgiure it on DE level (two fingers) |
| 12:02.25 | sonOfRa | Not sure how to do it with a touchpad without buttons |
| 12:02.59 | shtrb | sonOfRa , check your DE , 'KDE' has that option |
| 12:03.44 | shtrb | you also have "regions" on it that can be configured |
| 12:04.04 | awal1 | son0fRa, nice pressing left and right buttons at same time does the job without editing any stuff |
| 12:04.12 | awal1 | thanks |
| 12:04.24 | awal1 | thanks guys, problem solved |
| 12:04.33 | sonOfRa | shtrb: yeah, it's likely possible, but I'm used to the buttons anyhow. I bet it's somewhere in GNOME as well |
| 12:04.52 | shtrb | sorry , I meant to say that for awal1 |
| 12:05.07 | awal1 | shtrb, i just run wm's, no DE, but thanks |
| 12:05.11 | *** join/#debian Se-bash (~seba@unaffiliated/se-bash) |
| 12:05.34 | shtrb | in that case xorg and fdi to the rescue |
| 12:06.28 | awal1 | xorg config, i guess yeah. but for now left+right buttons is ok |
| 12:07.18 | *** join/#debian ghgfh (5cb175c2@gateway/web/cgi-irc/kiwiirc.com/ip.92.177.117.194) |
| 12:08.59 | *** join/#debian cadillac_ (~omab@r167-61-108-157.dialup.adsl.anteldata.net.uy) |
| 12:09.00 | *** mode/#debian [+l 1691] by debhelper |
| 12:10.50 | *** join/#debian xet7 (~xet7@80-186-0-180.elisa-mobile.fi) |
| 12:10.58 | tharkun | A new install is asking from a missing firmware files b43/ucode15.fw what is the package to download and where can I download it from. Its been a while since I laste poked at the Debian website. |
| 12:11.29 | shtrb | you can install the bcm firmware |
| 12:11.58 | *** join/#debian davimore (~davimore@185.143.230.224) |
| 12:12.02 | tharkun | shtrb: shure, where do I download it from? |
| 12:12.06 | *** join/#debian tanay (Elite19022@gateway/shell/elitebnc/x-vqlsdenymocaqmua) |
| 12:12.14 | tharkun | packages.debian.org changed a lot lately. |
| 12:12.41 | *** join/#debian e14 (~e14@2601:184:487f:ff30:c86b:ebd0:fe43:e5d3) |
| 12:12.50 | BluesKaj | tharkun, which b43 chip ? |
| 12:12.52 | shtrb | you may need to install the legacy driver (https://packages.debian.org/jessie/firmware-b43-installer) also https://wiki.debian.org/bcm43xx |
| 12:13.01 | *** join/#debian zachary (~zachary@c-98-200-208-125.hsd1.tx.comcast.net) |
| 12:13.07 | shtrb | you need to identify your card (because it's either that or the legacy) |
| 12:13.43 | tharkun | shtrb: it sounds about right. |
| 12:14.09 | *** join/#debian denisbr (~Denis@2804:7f5:d180:9cd7:3d62:791a:578f:49aa) |
| 12:14.15 | venkat_330 | what happen when "save for session password" is selected password prompt, Where does store and which service stores that. need some input |
| 12:14.17 | *** join/#debian luckman212 (~luckman21@unaffiliated/luckman212) |
| 12:14.35 | *** join/#debian Emmanuel_Chanel (~emmanuel@ZN024160.ppp.dion.ne.jp) |
| 12:15.59 | denisbr | venkat_330, in the browser? |
| 12:17.26 | venkat_330 | denisbr: for Linux application "GKSU" |
| 12:18.33 | *** join/#debian Scaniatrucker (~Scaniatru@78-56-98-5.static.zebra.lt) |
| 12:20.25 | denisbr | venkat_330, Ok, Sorry, I can´t help you with it |
| 12:22.04 | tharkun | How do I unpack the .deb file? |
| 12:23.46 | danwellby | what version of grub is installed with debian 9? |
| 12:24.00 | *** join/#debian lanu (~host@unaffiliated/lanu) |
| 12:24.07 | denisbr | tharkun, you can use following ar command: |
| 12:24.10 | denisbr | ar x example.deb |
| 12:24.21 | denisbr | or dpkg -x package.deb /tmp/out |
| 12:25.18 | *** join/#debian jackNemrod_ (~Thunderbi@185.75.141.25) |
| 12:26.25 | *** join/#debian notebox (~textual@82.197.136.118) |
| 12:26.49 | *** join/#debian rocksteady (~tyfoo@ip4d17e2d3.dynamic.kabel-deutschland.de) |
| 12:27.48 | towo^work | danwellby, 2.02~beta3-5 |
| 12:28.26 | tharkun | denisbr: Thanks |
| 12:29.06 | danwellby | thank you towo^work |
| 12:29.18 | denisbr | tharkun, you are welcome |
| 12:29.19 | *** join/#debian e14 (~e14@2601:184:487f:ff30:c86b:ebd0:fe43:e5d3) |
| 12:32.26 | *** join/#debian nils_ (~nils_@pdpc/supporter/35for7/nils) |
| 12:32.44 | *** join/#debian alexlist (~alexlist@bjoerk.list.priv.at) |
| 12:33.42 | TheAvatar | Say I have a remote ssl tunnel that ends up on my server at localhost:5080. How would I access that remotely from my windows machine, that is on the same subnet as the server? I figured an ssh tunnel in putty could do the trick? |
| 12:34.09 | *** join/#debian alexlist (~alexlist@bjoerk.list.priv.at) |
| 12:34.29 | *** join/#debian datasmurf1 (~datasmurf@185.103.110.204) |
| 12:34.38 | *** join/#debian datasmurf1 (~datasmurf@unaffiliated/datasmurf) |
| 12:35.14 | *** join/#debian alexlist (~alexlist@bjoerk.list.priv.at) |
| 12:35.21 | *** join/#debian Achylles (~Achylles@191.19.89.54) |
| 12:35.30 | *** join/#debian Brigo (~Brigo@43.10.60.178.dynamic.reverse-mundo-r.com) |
| 12:36.02 | *** join/#debian Se-bash^2 (~seba@unaffiliated/se-bash) |
| 12:36.42 | *** join/#debian domovoy_ (~domovoy@37.167.84.110) |
| 12:36.53 | *** join/#debian High_Priest (~hp@unaffiliated/high-priest/x-8117523) |
| 12:38.07 | *** join/#debian RalphBa (~RalphBa@a.ralphs-tech.com) |
| 12:38.11 | *** join/#debian err404 (~err404@ns300916.ip-91-121-67.eu) |
| 12:39.00 | *** mode/#debian [+l 1698] by debhelper |
| 12:39.29 | *** join/#debian gwolf23 (~gwolf@80.232.163.46) |
| 12:41.14 | *** join/#debian spinbee (spinbee@modemcable176.93-203-24.mc.videotron.ca) |
| 12:41.45 | *** join/#debian eduardas_m (~eduardas@213.197.143.19) |
| 12:42.25 | bolt | TheAvatar: if you want SSH to listen to a port on your box and allow other machines in the network to access that port, look into the GatewayPorts option in sshd |
| 12:42.28 | *** join/#debian Haudegen (~quassel@212-186-77-29.static.upcbusiness.at) |
| 12:42.30 | *** join/#debian hikiko_ (~hikiko@athedsl-59601.home.otenet.gr) |
| 12:46.40 | *** join/#debian dsai2iu2n (~username@58.146.199.155) |
| 12:46.40 | *** join/#debian sn00z (~storm@140-64-190-213.intermediasud.com) |
| 12:47.03 | TheAvatar | bolt, okay, thanks - will do that |
| 12:48.00 | *** join/#debian jackNemrod_ (~Thunderbi@217.74.105.4) |
| 12:48.27 | *** join/#debian alexlist (~alexlist@bjoerk.list.priv.at) |
| 12:48.39 | *** join/#debian hikiko (~hikiko@unaffiliated/hikiko) |
| 12:48.53 | Iridos | TheAvatar, probably⦠don't see why one shouldn't be able to chain forwards⦠except that it's a bit ⦠iffy or even⦠mucky ^^ |
| 12:54.19 | *** join/#debian smmcdev (~smmcdev@206.174.185.86) |
| 12:54.40 | *** join/#debian Cy-GorWork (~IceChat9@4.14.206.66) |
| 12:55.27 | *** join/#debian iqualfragile (~iqualfrag@unaffiliated/iqualfragile) |
| 12:55.33 | *** join/#debian oo_miguel (~miguel@89-65-253-109.dynamic.chello.pl) |
| 12:55.34 | *** join/#debian macartur (~macartur@alien.ime.usp.br) |
| 12:55.39 | oo_miguel | I have a BACKUP partition locally which i would like to sync to an remote server. however I |
| 12:55.42 | oo_miguel | <PROTECTED> |
| 12:55.45 | *** join/#debian sypher (~sypher@unaffiliated/sypher) |
| 12:55.45 | oo_miguel | <PROTECTED> |
| 12:57.00 | *** join/#debian dave0x6d (uid190567@gateway/web/irccloud.com/x-cnzxwpvnkfordrla) |
| 12:58.09 | *** join/#debian OS-26293 (~OS-26293@182.48.238.54) |
| 12:58.50 | *** join/#debian datasmurf1 (~datasmurf@unaffiliated/datasmurf) |
| 12:58.54 | *** join/#debian youngvision (~youngvisi@185.156.173.229) |
| 12:59.00 | *** mode/#debian [+l 1707] by debhelper |
| 12:59.15 | *** join/#debian electro33 (uid613@gateway/web/irccloud.com/x-meelrggvetmzmupl) |
| 12:59.23 | OS-26293 | Hi |
| 12:59.30 | youngvision | Hi |
| 12:59.34 | oo_miguel | hi |
| 13:00.22 | *** join/#debian betandr (~betandr@132.185.158.36) |
| 13:01.29 | *** join/#debian cdown (~cdown@199.201.66.0) |
| 13:01.32 | petn-randall | oo_miguel: I would create a LUKS container, put the data in there, and push the container file onto the remote server. |
| 13:02.08 | petn-randall | oo_miguel: Maybe even a version where the LUKS header is not synced over, too. Then you just need to keep the LUKS header backed up locally, you can have a few USB sticks for that. |
| 13:02.09 | oo_miguel | petn-randall: would this also work with incremental backups? |
| 13:02.26 | petn-randall | oo_miguel: sure, inside the container is just a normal filesystem. |
| 13:02.45 | petn-randall | oo_miguel: Would make sense if you can rsync the file, or access it directly. |
| 13:03.41 | oo_miguel | petn-randall: sounds good, I'll have a look at this. thank you! |
| 13:04.11 | *** join/#debian buffal0 (~buffal0@162.216.105.134) |
| 13:04.20 | *** join/#debian kongkong2 (~atomic@221.192.179.125) |
| 13:05.15 | *** join/#debian UnixMonky (~UnixMonky@64.27.210.98) |
| 13:05.38 | *** join/#debian Cy-GorWork (~IceChat9@4.14.206.66) |
| 13:05.58 | *** join/#debian shinnya (~shinnya@129.180.210.220.dy.bbexcite.jp) |
| 13:06.07 | *** join/#debian Jonwel (~Jonwel@541971C3.cm-5-2b.dynamic.ziggo.nl) |
| 13:09.55 | *** join/#debian UnixMonky_ (~UnixMonky@64.27.210.98) |
| 13:12.41 | *** join/#debian kongkong (~atomic@221.192.179.72) |
| 13:13.12 | *** join/#debian whiskey9 (~blargh@cos-128-210-107-25.science.purdue.edu) |
| 13:13.13 | *** join/#debian dave102 (~gt-ns@83.104.251.241) |
| 13:13.49 | dave102 | how do i generate a sha1 for data stored in a file generated per line ? |
| 13:14.17 | dave102 | im trying 'cat file.txt | xargs openssl sha1' |
| 13:14.25 | *** join/#debian mtn (~mtn@unaffiliated/mtn) |
| 13:14.32 | tx | xargs -L |
| 13:14.43 | tx | sets max lines per right-side command |
| 13:14.50 | tx | so xargs -L1 |
| 13:15.22 | *** join/#debian T601f (~T601f@www17.redstation.co.uk) |
| 13:15.44 | dave102 | tx: i get "no such file or directory" for each line in the file cattted to the screen |
| 13:15.44 | *** join/#debian amcorreia (~amcorreia@201.22.234.39.dynamic.adsl.gvt.net.br) |
| 13:15.53 | tx | hmm, what about -n1 |
| 13:16.05 | dave102 | same |
| 13:16.09 | tx | if that doesn't work use an if statement |
| 13:16.14 | abrotman | there is a sha1sum command ? |
| 13:16.21 | dave102 | at the end it says "xargs: unmatched single quote; by default quotes are special to xargs unless you use the -0 option" |
| 13:16.22 | tx | while read -r line; do sha1 $line; done |
| 13:16.36 | *** join/#debian mzf (~mzf@unaffiliated/mzf) |
| 13:16.46 | tx | abrotman: yes |
| 13:16.51 | abrotman | dave102: and you probably would get a better answer from #bash |
| 13:16.59 | petn-randall | tx: sha1 isn't a command. |
| 13:18.10 | abrotman | sha1sum is |
| 13:18.11 | *** join/#debian _foldLeft (~foldleft@c-69-243-51-149.hsd1.dc.comcast.net) |
| 13:18.59 | dave102 | ok thanks |
| 13:21.18 | *** join/#debian sag3 (~O@212.129.58.137) |
| 13:22.04 | *** join/#debian ltem (~ltem@h081217057026.dyn.cm.kabsi.at) |
| 13:22.38 | *** join/#debian Cy-GorWork (~IceChat9@4.14.206.66) |
| 13:23.25 | *** join/#debian sypher (~sypher@unaffiliated/sypher) |
| 13:23.32 | *** join/#debian zabow (~zabow@156.148.70.222) |
| 13:24.44 | *** join/#debian disposable2 (~Thunderbi@213.164.31.89) |
| 13:25.48 | *** join/#debian peterbec` (~peterbeci@75-142-96-216.static.mtpk.ca.charter.com) |
| 13:26.24 | *** join/#debian haylon (~quassel@ruby/user/haylon) |
| 13:26.27 | *** join/#debian turfal (~Thunderbi@27.red-213-97-245.staticip.rima-tde.net) |
| 13:30.04 | *** join/#debian Cabanossi (~Cabanossi@p57995BB5.dip0.t-ipconnect.de) |
| 13:31.13 | *** join/#debian Seto_Kaiba (~Hunterkll@2001:470:8b06:100:7882:9922:e509:4169) |
| 13:32.26 | *** join/#debian Mokuba_K (~Hunterkll@2001:470:8b06:100:7882:9922:e509:4169) |
| 13:33.05 | *** join/#debian jhutchins_wk (0c7e567a@gateway/web/freenode/ip.12.126.86.122) |
| 13:33.16 | *** join/#debian Resiliente (~user@92.190.133.10) |
| 13:34.16 | Resiliente | hello toeveryone, I have installed a few days ago debian and it did not ask me about how to configure the internal mail system with exim, how I shoudl do that? |
| 13:34.46 | *** part/#debian kaimo (~kaimo@host86-177-254-101.range86-177.btcentralplus.com) |
| 13:34.52 | *** join/#debian TinkerTiger (~will@96-42-6-119.dhcp.stpt.wi.charter.com) |
| 13:35.02 | petn-randall | Resiliente: What do you want to change? |
| 13:35.43 | *** join/#debian Hunterkll (~Hunterkll@remote.kisaracorporation.com) |
| 13:36.31 | Resiliente | petn-randall, mmmm I want to know 3 things: how can I acces the internal emaill (mutt maybe?) and how can I configure/reconfigure the system, and where is the actual configuration stored |
| 13:36.43 | youngvision | Resiliente: You can try : dpkg-reconfigure exim4-config |
| 13:37.10 | Resiliente | young that answers the question 2 |
| 13:37.12 | *** join/#debian b4d (~b4d@unaffiliated/b4d) |
| 13:37.22 | b4d | Hi, how can I disable and remove auditd? |
| 13:37.35 | *** join/#debian antgel (~topdog@82.166.98.41) |
| 13:38.25 | youngvision | the configuration file is located at /etc/exim4/update-exim4.conf.conf |
| 13:39.12 | *** join/#debian vaidik (~vaidik@182.69.136.108) |
| 13:39.17 | *** join/#debian abu0 (~abu0@cc3d8aabd7137.rev.snt.net.pl) |
| 13:39.41 | Resiliente | that answers the question 3ç |
| 13:39.43 | tharkun | Resiliente: What do you want to do with the internal mail server? |
| 13:39.50 | *** join/#debian lab (~test@wsip-24-249-97-197.ok.ok.cox.net) |
| 13:39.51 | *** join/#debian vaidik (~vaidik@182.69.136.108) |
| 13:40.06 | *** join/#debian BeamWatcher_ (~gashead76@208.117.74.236) |
| 13:40.07 | Resiliente | tharkun, mmm to read the messages from the users to start witth |
| 13:40.21 | Resiliente | internal mail by the moment |
| 13:40.37 | *** join/#debian vaidik (~vaidik@182.69.136.108) |
| 13:40.55 | tharkun | Resiliente: /var/spool/mail will hold all your local email on an mbox format mutt is the usual weapon of choice. |
| 13:40.57 | petn-randall | Resiliente: Depends on where you send the files with your config. |
| 13:41.08 | petn-randall | s/files/mails/ |
| 13:41.08 | *** join/#debian overlord_tm (~andraz@89-212-104-188.dynamic.t-2.net) |
| 13:41.24 | youngvision | b4d: 'service auditd stop' i think |
| 13:41.27 | tharkun | Yet if you need to grow from there you will end up setting up a full blown email system imap pop3 submission and all the rest of the goodies. |
| 13:41.36 | jhutchins_wk | Resiliente: mail/mailx is probably the lowest level mail reader. I usually like to install (al)pine. |
| 13:41.46 | *** join/#debian GDiaX (~gdiax@188.251.57.44) |
| 13:41.47 | Resiliente | tharkun, so I fire mutt and it reads the internal email |
| 13:42.01 | Resiliente | jhutchins, I used to use mutt, but it was long time ago |
| 13:42.20 | *** join/#debian betandr (~betandr@132.185.158.36) |
| 13:42.20 | *** join/#debian sz0 (uid110435@gateway/web/irccloud.com/x-zjnbnqqeemmrvpyp) |
| 13:42.51 | tharkun | Resiliente: I believe it will be configured out of the box but you can personalize it to taste. I began using mutt for the same reason long ago. |
| 13:43.05 | jhutchins_wk | I never managed to figure out mutt's configuration. |
| 13:43.52 | tharkun | Tricky at first then when you get the hang of it quite nice :) |
| 13:44.15 | Resiliente | mail: coomandnot found (same for mailx) |
| 13:44.25 | jelly | I used mutt ever since nether.net had 0.27 installed |
| 13:44.25 | *** join/#debian powi (~powi@201.33.146.77.rev.sfr.net) |
| 13:44.41 | tharkun | bragging |
| 13:45.09 | jelly | of course |
| 13:45.34 | pierrot | Hi. During the installation process of `apt-dist upgrade` some error happened with kde and now I don't see the menu bar neither I can maximize the terminal window where I had runned that command |
| 13:46.11 | jelly | Resiliente, install it. |
| 13:46.19 | Resiliente | jhutchins, mail: comman dnot found (same for mailx) |
| 13:46.26 | jelly | !installit |
| 13:46.26 | dpkg | Your box does not come with every application, tool and utility known to debiankind installed already. If you find that the program you've been told to use isn't there, install it. Also ask me about <search>. If someone suggests an application to you, it's highly likely that it's available via apt-get or aptitude. |
| 13:46.32 | pierrot | I tried with alt+tab but says "The Window Switcher installation is broken, resources are missing. Contact your distribution about this." |
| 13:47.01 | b4d | youngvision: thanks |
| 13:47.07 | Resiliente | jhutchins, mailx comes with bsd-mailx package? |
| 13:47.20 | youngvision | b4d: that works ? |
| 13:47.36 | *** join/#debian forcerecon (~quassel@gateway/tor-sasl/forcerecon) |
| 13:47.50 | *** join/#debian josecapurro (~jcapurro@host-242.172.52.190.copaco.com.py) |
| 13:47.55 | tharkun | iirc yes it does but mailx is a bit too low level for my taste. Better start with something like alpine or one of its cousins |
| 13:48.15 | jelly | Resiliente, heirloom-mailx is a nice mailx variant. |
| 13:48.16 | jelly | for interactive use, mutt or alpine will be nicer |
| 13:48.42 | *** join/#debian eymey (~eymey@AAubervilliers-157-1-6-36.w83-200.abo.wanadoo.fr) |
| 13:48.58 | jelly | Resiliente, there are a couple mailx variants available, bsd-mailx is one |
| 13:49.00 | *** mode/#debian [+l 1714] by debhelper |
| 13:49.32 | pierrot | basically now I don't know when to restart because I can't see the progression of `apt dist-upgrade` |
| 13:50.24 | jelly | pierrot, switch to text console, log in, check the process list to see if apt is still running or not |
| 13:50.50 | Resiliente | jelly aha I am searching with apt-cache search... do you know waht package is "mail" in? |
| 13:51.00 | jelly | Resiliente, same ones as mailx |
| 13:51.03 | *** join/#debian psychicist__ (~psychicis@ip127-8-212-87.adsl2.static.versatel.nl) |
| 13:52.12 | b4d | youngvision: yeah, i dont know how i did not try that :D |
| 13:52.24 | Resiliente | ah so mail is in fact mail/mailx? bsd-mailx and heirloom-,ailx? |
| 13:52.42 | pierrot | jelly: I listed the processes and it's still there |
| 13:52.50 | *** join/#debian Aristide (~quassel@2a01:e35:2f4a:7450:c2:8ff:fec1:936b) |
| 13:52.51 | *** join/#debian o33 (~o33@183.93.174.29) |
| 13:53.19 | jelly | Resiliente, on debian, yes |
| 13:53.36 | *** join/#debian Adalid_Negro (~said@181.143.135.13) |
| 13:53.40 | jelly | judd, whatprovides mailx |
| 13:53.45 | judd | Package mailx in stretch/amd64 is provided by: bsd-mailx, mailutils. |
| 13:53.51 | *** join/#debian Rockj (rockj@rockj.net) |
| 13:54.03 | jelly | that's weird |
| 13:54.06 | youngvision | b4d: Nice ;) |
| 13:54.10 | jelly | ,v heirloom-mailx |
| 13:54.11 | judd | Package: heirloom-mailx on amd64 -- wheezy-security: 12.5-2+deb7u1; wheezy: 12.5-2+deb7u1; jessie: 12.5-4; sid: 14.8.16-1; buster: 14.8.16-1; stretch: 14.8.16-1 |
| 13:54.22 | *** join/#debian jackNemrod_ (~Thunderbi@185.75.141.25) |
| 13:54.27 | Resiliente | jelly but mail/mailx are 2 programs, right? |
| 13:55.04 | jelly | Resiliente, they're two very similar commands, often implemented with one same binary |
| 13:55.41 | jelly | one that I _think_behaves slightly different depending on whether you call it as /usr/bin/mail or /usr/bin/mailx |
| 13:56.00 | Resiliente | that'ws why they are in the same package then |
| 13:57.04 | *** join/#debian Darby_Crash (~Darby_Cra@net-2-37-229-137.cust.vodafonedsl.it) |
| 13:57.09 | jhutchins_wk | Resiliente: mailx used to be a default package. |
| 13:58.01 | jelly | Resiliente, http://paste.debian.net/974939/ -- literally the same binary |
| 13:58.21 | pierrot | jelly: I did `ps aux | grep apt` and I don't see it any more. Since it was like 78% when the kde error happened, maybe the upgrade finished? |
| 13:58.36 | jelly | pierrot, could be |
| 13:58.48 | jelly | pierrot, try running it again from the console |
| 13:59.14 | *** join/#debian nils_ (~nils_@pdpc/supporter/35for7/nils) |
| 14:00.07 | *** join/#debian Cabanossi (~Cabanossi@p57995BB5.dip0.t-ipconnect.de) |
| 14:00.19 | pierrot | jelly: I did `apt-get update` and started to update |
| 14:00.34 | pierrot | so did it finish? |
| 14:00.56 | pierrot | I want to know if it's safe to reboot |
| 14:01.20 | Resiliente | jhutchins, that's waht I thought, but it seems like it is not installed... |
| 14:04.05 | *** join/#debian vaidik (~vaidik@182.69.136.108) |
| 14:04.42 | Resiliente | jhutchins, is it possible that the default installations of debian they don't installed a mail base sytem? |
| 14:04.47 | *** join/#debian nighty- (~nighty@s229123.ppp.asahi-net.or.jp) |
| 14:05.04 | *** join/#debian OS-13112 (~OS-13112@105.94.101.165) |
| 14:05.58 | *** join/#debian kobain (~kobain@unaffiliated/kobain) |
| 14:06.25 | *** join/#debian kobain (~kobain@unaffiliated/kobain) |
| 14:06.31 | *** join/#debian xet7 (~xet7@80-186-0-180.elisa-mobile.fi) |
| 14:07.24 | *** join/#debian RalphBa (~RalphBa@a.ralphs-tech.com) |
| 14:07.25 | *** join/#debian jdipierro (~jdipierro@67.151.160.34) |
| 14:07.26 | *** join/#debian cdown (~cdown@199.201.66.0) |
| 14:08.35 | *** join/#debian th0r (~th0r@65.131.231.48) |
| 14:09.20 | *** join/#debian vaidik (~vaidik@182.69.136.108) |
| 14:09.56 | jhutchins_wk | Resiliente: Yes. |
| 14:10.14 | *** join/#debian vaidik (~vaidik@182.69.136.108) |
| 14:10.35 | Resiliente | jhutchins, but it use to be the other way, and use to be mandatory to instyall a local emani system, right? |
| 14:11.12 | *** join/#debian kaimo (~kaimo@host86-177-254-101.range86-177.btcentralplus.com) |
| 14:11.54 | *** join/#debian err404 (~err404@ns300916.ip-91-121-67.eu) |
| 14:12.12 | kaimo | how do you take a screenshot in xfce debian |
| 14:12.22 | kaimo | printscreen doesnt do anything |
| 14:12.23 | *** join/#debian tty0_ (~NA@unaffiliated/tty0/x-3092968) |
| 14:12.29 | tw | yes, but the default mail system was local delivery only. |
| 14:12.41 | tw | (as I recall) |
| 14:12.48 | th0r | kaimo, install the xfce panel screenshot applet, part of xfce4-goodies I think |
| 14:12.55 | *** part/#debian shtrb (~shtrb@unaffiliated/shtrb) |
| 14:13.17 | *** join/#debian Achylles (~Achylles@191.19.89.54) |
| 14:13.42 | *** join/#debian Krakakanok (~k4@7.red-176-85-138.dynamicip.rima-tde.net) |
| 14:13.42 | *** join/#debian Krakakanok (~k4@unaffiliated/krakakanok) |
| 14:14.05 | kaimo | xfce4-goodies/stable,now 4.12.3 amd64 [installed,automatic] |
| 14:14.05 | kaimo | <PROTECTED> |
| 14:14.05 | kaimo | xfce4-screenshooter/stable,now 1.8.2-2 amd64 [installed,automatic] |
| 14:14.05 | kaimo | <PROTECTED> |
| 14:14.05 | kaimo | xfce4-screenshooter-plugin/stable 1.8.2-2 all |
| 14:14.06 | *** kick/#debian [kaimo!~debhelper@unaffiliated/debhelper] by debhelper (flood. Please use http://paste.debian.net instead.) |
| 14:15.40 | Resiliente | tw yes, it was local delivery by default, but it was mandatory to install ir, now it isn't |
| 14:16.06 | *** join/#debian donofrio (~donofrio@host-232.subnet-17.med.umich.edu) |
| 14:16.14 | *** join/#debian kaimo (~kaimo@host86-177-254-101.range86-177.btcentralplus.com) |
| 14:16.21 | kaimo | sorry for flood problem solved sorry for the inconvience |
| 14:16.29 | kaimo | tyvm again |
| 14:16.51 | *** join/#debian nighty- (~nighty@s229123.ppp.asahi-net.or.jp) |
| 14:17.38 | *** join/#debian blueness (~blueness@gentoo/developer/blueness) |
| 14:19.31 | *** join/#debian dboune (~dboune@host-24-52-189-34.cvcca.com) |
| 14:20.23 | *** join/#debian cyphase (~cyphase@unaffiliated/cyphase) |
| 14:20.32 | *** join/#debian in1t3r_ (~in1t3r@unaffiliated/lordshiva) |
| 14:23.28 | *** join/#debian GenteelBen (~GenteelBe@cpc111801-lutn14-2-0-cust55.9-3.cable.virginm.net) |
| 14:24.06 | *** join/#debian cluelessperson (~cluelessp@unaffiliated/cluelessperson) |
| 14:24.26 | cluelessperson | serious question, WHY would debian leave the naming scheme or interfaces? |
| 14:24.29 | cluelessperson | like eth0 etc |
| 14:25.29 | *** join/#debian cyphase (~cyphase@unaffiliated/cyphase) |
| 14:25.37 | babilen | cluelessperson: https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames/ |
| 14:26.41 | *** join/#debian cyphase (~cyphase@unaffiliated/cyphase) |
| 14:26.51 | *** join/#debian peterbec` (~peterbeci@75-142-96-216.static.mtpk.ca.charter.com) |
| 14:26.59 | *** join/#debian root (~root@p5494EDAA.dip0.t-ipconnect.de) |
| 14:27.38 | *** join/#debian Madda (~Madda@host160-233-dynamic.244-95-r.retail.telecomitalia.it) |
| 14:28.23 | *** join/#debian cyphase (~cyphase@unaffiliated/cyphase) |
| 14:28.41 | *** join/#debian DeaDSouL (~DeaDSouL@37.231.210.189) |
| 14:29.27 | *** join/#debian cyphase (~cyphase@unaffiliated/cyphase) |
| 14:29.30 | *** join/#debian f10 (~flo@ip5b40643f.dynamic.kabel-deutschland.de) |
| 14:29.53 | TheAvatar | bolt, that worked perfectly, thanks |
| 14:30.19 | TheAvatar | Iridos, I think that's initially what I tried, but without any luck though. GatewayPorts worked fine when binding to all IPs instead |
| 14:30.25 | *** join/#debian cyphase (~cyphase@unaffiliated/cyphase) |
| 14:30.26 | TheAvatar | (the device is firewalled) |
| 14:30.27 | *** join/#debian disposable2 (~Thunderbi@213.164.31.89) |
| 14:32.04 | jelly | cluelessperson, what do you mean by "leave" |
| 14:32.17 | jelly | leave it as it was? depart from what it was? |
| 14:32.41 | *** join/#debian HarveyPwca (~HarveyPwc@ip-64-134-173-214.public.wayport.net) |
| 14:33.17 | *** join/#debian huwjr (~huwjr@p203-spurfowl-gui.tch.virgin.net) |
| 14:33.33 | bolt | TheAvatar: :) |
| 14:36.09 | *** join/#debian musalbas (~musalbas@2001:bc8:30c2:ff00::) |
| 14:36.50 | *** join/#debian cdown (~cdown@199.201.66.0) |
| 14:39.16 | *** join/#debian err404 (~err404@163.172.158.42) |
| 14:39.27 | *** join/#debian Hyp3ri0n (~OtakuSenp@unaffiliated/otakusenpai) |
| 14:39.42 | *** join/#debian alexertech (~ab@unaffiliated/alexertech) |
| 14:40.55 | *** join/#debian cdown (~cdown@199.201.66.0) |
| 14:41.26 | *** join/#debian remo (~user@d0-138.ltk.com.ua) |
| 14:42.05 | *** join/#debian domovoy (~domovoy@37.165.83.55) |
| 14:42.21 | *** join/#debian whiskey9 (~blargh@cos-128-210-107-25.science.purdue.edu) |
| 14:42.41 | *** join/#debian wpppp (50bb723a@gateway/web/cgi-irc/kiwiirc.com/ip.80.187.114.58) |
| 14:43.37 | *** join/#debian ben_roose (~roose@roose.cs.wichita.edu) |
| 14:44.05 | wpppp | So why can't one just download Debian for ARM and slap it onto a RaspBerry PI? Why is there stuff like Raspian or Hypriot? |
| 14:44.23 | wpppp | this is confusing to me. Sure, one usually just follows some tutorial and installs an image - but WHY? |
| 14:44.37 | ralpheeee | what package can i use to notify me of any updates with a tiling window manager |
| 14:46.56 | *** join/#debian LorD_n1c0w1 (~igorhenri@187.45.177.18) |
| 14:47.05 | pierrot | I did the upgrade and seems to work fine, but after doing `apt-get purge $(dpkg -l | awk '/^rc/ { print $2 }')` a huge list of packages was removed. Some of them I think it shouldn't be removed like kdm. |
| 14:47.42 | *** join/#debian ChunkzZ (uid233645@gateway/web/irccloud.com/x-wyygqzdszwtxhedb) |
| 14:48.20 | *** join/#debian timahvo1 (~rogue@197.232.18.157) |
| 14:48.23 | *** join/#debian ChunkzZ (uid233645@unaffiliated/chunkzz) |
| 14:48.23 | *** join/#debian ChunkzZ (uid233645@gateway/web/irccloud.com/x-wyygqzdszwtxhedb) |
| 14:48.58 | elkmoose | wpppp specific hardware acceleration for raspberry pi can only be found in raspbian |
| 14:49.01 | Brigo | <PROTECTED> |
| 14:49.03 | *** join/#debian kculpis (~kculpic@unaffiliated/kculpic) |
| 14:49.07 | *** part/#debian denisbr (~Denis@2804:7f5:d180:9cd7:3d62:791a:578f:49aa) |
| 14:49.15 | *** join/#debian Grandolf (~NotGrando@2604:6000:d842:8600:6498:3e34:d3f7:75aa) |
| 14:49.16 | *** join/#debian remi_ (~remi@orage.inrialpes.fr) |
| 14:49.33 | *** join/#debian Grandolf (~NotGrando@unaffiliated/grandolf) |
| 14:49.40 | *** join/#debian jackNemrod_ (~Thunderbi@217.74.105.4) |
| 14:49.49 | *** join/#debian smmcdev (~smmcdev@206.174.185.86) |
| 14:49.49 | BluesKaj | wpppp, because debian default desktop is gnome and it's quite heavy going for an rpi cpu and RAM, hence a well desgned and easy to use desktop like pixel works great on raspbian |
| 14:49.56 | Brigo | elkmoose, wpppp at least in old raspberry. I think new ones are supported by debian default kernel. |
| 14:50.04 | *** join/#debian remi_ (~remi@orage.inrialpes.fr) |
| 14:51.35 | wpppp | elkmoose, BluesKaj, Brigo: So why can't one install this specific acceleration thing as Debian package or kernel module? Why a whole distro for that? |
| 14:51.36 | *** join/#debian towo` (~towo@unaffiliated/towo/x-4064351) |
| 14:51.52 | wpppp | and how much is the acceleration? is it worth it (probably is, right?)? I mean, does it speed up by 20% or so? |
| 14:52.21 | BluesKaj | wpppp, suggest you ask in #raspbian |
| 14:52.28 | wpppp | ok, will do that |
| 14:53.37 | *** join/#debian timahvo1 (~rogue@197.232.18.157) |
| 14:54.13 | *** join/#debian wilbert (~wilbert@unaffiliated/wilbert) |
| 14:56.10 | *** join/#debian alecov (~control@unaffiliated/control) |
| 14:56.55 | *** join/#debian Wulf (~Wulf@unaffiliated/wulf) |
| 14:57.10 | *** join/#debian RalphBa (~RalphBa@a.ralphs-tech.com) |
| 14:57.39 | kaimo | ive installed dbian into a virtual box to test it before leaving windows is there an apt-get for intel and nvida drivers? or must i treat it like windows adn go to the websites adn download them? |
| 14:57.55 | wpppp | aren't nvidia drivers non-free as binaries? |
| 14:58.06 | wpppp | some years ago nvidia offers some install script |
| 14:58.08 | wpppp | iirc |
| 14:58.54 | kaimo | non free as binaries can you translate this into english and not tech speak please |
| 14:58.59 | *** join/#debian timahvo1 (~rogue@197.232.18.157) |
| 14:59.32 | wpppp | https://wiki.debian.org/NvidiaGraphicsDrivers#Drivers |
| 15:00.09 | kaimo | so no ones for stretch only jessie? |
| 15:00.12 | *** join/#debian J1sy (~j1sy@vc-nat-gp-s-41-13-36-220.umts.vodacom.co.za) |
| 15:00.14 | *** join/#debian Cabanossi (~Cabanossi@p57995BB5.dip0.t-ipconnect.de) |
| 15:00.35 | *** join/#debian soee (~soee@user-94-254-232-136.play-internet.pl) |
| 15:01.08 | *** join/#debian fghjb3567 (~Mutter@49.80.75.123) |
| 15:01.08 | *** join/#debian Brigo (~Brigo@43.10.60.178.dynamic.reverse-mundo-r.com) |
| 15:01.19 | *** join/#debian f4cl3y (~f4cl3y@unaffiliated/f4cl3y) |
| 15:01.50 | *** part/#debian fghjb3567 (~Mutter@49.80.75.123) |
| 15:01.55 | wpppp | kaimo: not sure, maybe the nvidia ppl provide it |
| 15:01.56 | Brigo | wpppp, did you get your answer already? |
| 15:02.00 | wpppp | kaimo: debian stretch? :O |
| 15:02.06 | wpppp | Brigo: talking and waiting on it :D |
| 15:02.22 | *** join/#debian citypw (~citypw@207.226.142.235) |
| 15:02.33 | Brigo | wpppp, you need to recompile all the binaries. It's not just the kernel or some module. |
| 15:02.56 | wpppp | aha |
| 15:03.13 | wpppp | Brigo: and the debian guys haven't done that yet for debian arm? so others did this in separate distro? |
| 15:04.04 | wpppp | kaimo: https://packages.debian.org/stretch/nvidia-driver |
| 15:04.05 | wpppp | maybe? |
| 15:04.08 | *** join/#debian Hyp3ri0n (~OtakuSenp@unaffiliated/otakusenpai) |
| 15:04.32 | *** join/#debian timahvo1 (~rogue@197.232.18.157) |
| 15:04.39 | *** join/#debian dtux (~david@23.252.48.57) |
| 15:04.41 | *** join/#debian kedare (~kedare@hq.lodgify.net) |
| 15:04.44 | Brigo | wpppp, it's not just arm but a specifi kind of arm (a very old one). |
| 15:05.47 | Brigo | wpppp, https://www.raspbian.org/RaspbianFAQ |
| 15:05.49 | *** join/#debian Hyp3ri0n (~OtakuSenp@unaffiliated/otakusenpai) |
| 15:06.17 | *** join/#debian keantoken (~keantoken@69-92-5-169.cpe.cableone.net) |
| 15:06.22 | wpppp | Brigo: the latest raspi also got this very old arm? |
| 15:06.55 | keantoken | Where can I find commits for debian kernels? |
| 15:07.18 | Brigo | wpppp, i don't think so. |
| 15:07.54 | *** join/#debian antgel (~topdog@82.166.98.41) |
| 15:07.57 | wpppp | Brigo: so for the recent raspi the arm-compatibility argument doesn't count anymore :) |
| 15:08.01 | *** join/#debian dasher00 (~dasher00@185.23.213.22) |
| 15:08.34 | jelly | wpppp, r.pi 3 has a newer old arm inside that's just 5 years behind current processes not 10 |
| 15:08.51 | jelly | it is compatible with debian's armhf userspace |
| 15:09.48 | wpppp | jelly: thanks |
| 15:09.51 | *** join/#debian timahvo1 (~rogue@197.232.18.157) |
| 15:09.57 | *** join/#debian peewhy (~peewhy@80.215.85.53) |
| 15:11.01 | J1sy | Hello help my brother set my laptop monitor to no primary how do i set it to vga/laptop screen as primary since each time i get a white screen |
| 15:11.32 | *** join/#debian RalphBa (~RalphBa@a.ralphs-tech.com) |
| 15:11.34 | *** join/#debian chachasmooth (~chachasmo@unaffiliated/chachasmooth) |
| 15:11.35 | *** join/#debian kpease (~kpease@72.22.182.166) |
| 15:11.41 | *** join/#debian Lowl3v3l (~lowl3v3l@dslb-088-070-091-149.088.070.pools.vodafone-ip.de) |
| 15:13.54 | kaimo | tyvm |
| 15:14.08 | *** join/#debian HugsWontletgo (~HugsWontl@m77-219-4-88.cust.tele2.lv) |
| 15:14.19 | *** join/#debian cyborg-one (~cyborg-on@188-115-176-200.broadband.tenet.odessa.ua) |
| 15:14.27 | *** join/#debian ben_roose (~roose@roose.cs.wichita.edu) |
| 15:15.35 | *** join/#debian vaidik (~vaidik@182.69.136.108) |
| 15:16.33 | SwK | using cowbuilder with a local signed repo, however cowbuilder keeps complaining that the repo is not trusted... this only started with a new Stretch build box... any hints? (I even tried "[trusted=yes]" on my sources.list line but cowbuilder complains it cant parse that |
| 15:17.09 | *** part/#debian PhotoJim (jim@dubbo.ip6.photojim.ca) |
| 15:17.28 | *** join/#debian ssarah (~miguel@194.65.5.235) |
| 15:17.37 | pierrot | after doing `apt-get purge $(dpkg -l | awk '/^rc/ { print $2 }')` now the kde display manager (sddm) doesn't appear at startup. I have to login in a tty and do `startx` |
| 15:18.19 | pierrot | how could I solve this ir order to make sddm appear again? |
| 15:19.01 | *** join/#debian RalphBa (~RalphBa@a.ralphs-tech.com) |
| 15:19.13 | *** join/#debian roshanavand (~Thunderbi@ipb218ec90.dynamic.kabel-deutschland.de) |
| 15:20.09 | *** join/#debian nix64bit (~Thunderbi@197.155.4.163) |
| 15:21.03 | *** join/#debian atrapado_ (~atrapado@unaffiliated/atrapado) |
| 15:21.04 | BluesKaj | pierrot, sudo systemtl enable sddm, then, sudo systemctl start sddm, in the vt/tty, then reboot |
| 15:22.19 | *** join/#debian RalphBa (~RalphBa@a.ralphs-tech.com) |
| 15:22.35 | *** join/#debian mingdao (~mingdao@unaffiliated/mingdao) |
| 15:23.27 | *** join/#debian sumyunseal (~sumyunsea@cpe-108-185-166-234.socal.res.rr.com) |
| 15:24.40 | *** join/#debian Madda_ (~Madda@droidekas.m3cloud.it) |
| 15:25.01 | pierrot | BluesKaj: http://sprunge.us/eGdX |
| 15:25.11 | *** join/#debian fatalis (~fatalis@fatalis.pw) |
| 15:25.33 | pierrot | that's the output of `sudo systemtl enable sddm` |
| 15:25.44 | *** join/#debian cereal_poster (~Cereal@189.58.73.165.dynamic.adsl.gvt.net.br) |
| 15:25.54 | teraflops | in stretch you just systemctl enable --now sddm |
| 15:26.43 | pierrot | same output |
| 15:26.53 | *** join/#debian ChmEarl (~chmearl@unaffiliated/prymar56) |
| 15:26.56 | teraflops | --now just start it |
| 15:27.15 | teraflops | starts^ |
| 15:28.02 | pierrot | but there is an error. that output is not the expected one, isn't it? |
| 15:29.38 | BluesKaj | hmm, changes in systemd then |
| 15:29.38 | *** join/#debian DeadTOm (~deadtom@2001:4b98:dc0:41:216:3eff:fe58:44d0) |
| 15:30.16 | teraflops | pierrot: which debian release? |
| 15:30.18 | *** join/#debian Cabanossi (~Cabanossi@p57995BB5.dip0.t-ipconnect.de) |
| 15:31.26 | *** join/#debian suchademon (~suchademo@v22017022449145042.bestsrv.de) |
| 15:31.30 | suchademon | hi! |
| 15:32.00 | pierrot | I had Debian 8 until yesterday. Then I upgraded to 9 this morning and sddm worked fined. But... I executed `apt-get purge $(dpkg -l | awk '/^rc/ { print $2 }')` as suggested here https://www.debian.org/releases/stable/amd64/release-notes/ch-upgrading.es.html#for-next to purge removed packages |
| 15:32.06 | *** join/#debian Guest83690 (~renato@bl6-207-41.dsl.telepac.pt) |
| 15:32.09 | pierrot | after that command, I reboot |
| 15:32.47 | pierrot | and sddm didn't appear so I login in a console and did `startx` |
| 15:32.49 | suchademon | the control information of a debian package (that is extracted with dpkg -e), is that available for browsing on the web somewhere? i only find the actual content on sources.debian.net |
| 15:33.43 | BluesKaj | pierrot, best to to use sudo apt-get autoremove and autoclean for removing old unneeded packages |
| 15:33.52 | *** join/#debian Walakea (~Thunderbi@bband-dyn174.178-41-227.t-com.sk) |
| 15:34.50 | BluesKaj | not somebody's istring creation |
| 15:35.10 | pierrot | BluesKaj: I just followed the official Debian tutorial... |
| 15:35.18 | pierrot | for the upgrading process |
| 15:35.43 | BluesKaj | best to use apt not awk |
| 15:35.55 | *** join/#debian Madda (~Madda@host160-233-dynamic.244-95-r.retail.telecomitalia.it) |
| 15:36.29 | BluesKaj | never seen anything like that for officail package removal |
| 15:36.44 | pierrot | say that to who wrote that tutorial |
| 15:36.54 | towo` | that command only removes configs from removed packages |
| 15:37.04 | towo` | s/from/for |
| 15:37.25 | BluesKaj | guess it removed more that it was meant to |
| 15:37.27 | *** join/#debian qwebirc14941 (57a1339d@gateway/web/freenode/ip.87.161.51.157) |
| 15:37.40 | *** part/#debian qwebirc14941 (57a1339d@gateway/web/freenode/ip.87.161.51.157) |
| 15:37.43 | towo` | BluesKaj, no, it can't remove more than that |
| 15:37.48 | BluesKaj | that=than |
| 15:37.53 | teraflops | pierrot: tried reinstalling sddm package? |
| 15:38.22 | *** join/#debian blitzed (~blitzed@cpe-75-80-44-59.san.res.rr.com) |
| 15:38.47 | pierrot | teraflops: yeah, that was a possibility I was thinking about |
| 15:39.20 | teraflops | and why dont you try it? |
| 15:39.31 | BluesKaj | you mean youhaen't tried reinstalling sddm ??...oh lord |
| 15:40.36 | teraflops | you pipe awk to apt to remove packages without hesitation but still considering reinstalling a broken config package, hmmm |
| 15:40.40 | *** join/#debian RalphBa (~RalphBa@a.ralphs-tech.com) |
| 15:40.47 | *** join/#debian wonderworld (~ww@ip-176-198-197-145.hsi05.unitymediagroup.de) |
| 15:40.57 | teraflops | packages/configs |
| 15:41.00 | *** join/#debian polaris (~polaris_@189.222.235.125.dsl.dyn.telnor.net) |
| 15:41.59 | pierrot | reinstalled. I'll reboot |
| 15:43.15 | *** join/#debian magyar (~magyar@unaffiliated/magyar) |
| 15:43.31 | *** join/#debian ledeni_ (~ledeni@c49-177-40-65.dandn3.vic.optusnet.com.au) |
| 15:43.41 | *** join/#debian Nnavd (~Nnavd@d50-92-9-182.bchsia.telus.net) |
| 15:45.13 | teraflops | pierrot: also tried, dpkg-reconfigure sddm? |
| 15:46.17 | *** join/#debian Night-Shade (~tim@153.27.187.81.in-addr.arpa) |
| 15:46.27 | *** join/#debian Schmetterwurm (~Schmetter@p4FCEB7F3.dip0.t-ipconnect.de) |
| 15:46.44 | *** join/#debian RTFM[away] (~RTFMaway]@unaffiliated/rtfmaway/x-3892344) |
| 15:47.54 | *** join/#debian abu0 (~abu0@user-94-254-134-3.play-internet.pl) |
| 15:48.20 | *** join/#debian Krakakanok (~k4@204.red-176-85-125.dynamicip.rima-tde.net) |
| 15:48.20 | *** join/#debian Krakakanok (~k4@unaffiliated/krakakanok) |
| 15:49.53 | *** join/#debian Whiskey (~Whiskey@31.44.232.185) |
| 15:52.04 | *** join/#debian notebox (~textual@82.197.136.118) |
| 15:52.15 | *** join/#debian boris_t_ (~boris_t@82.112.41.207) |
| 15:52.25 | *** join/#debian Scaniatrucker (~Scaniatru@78-56-98-5.static.zebra.lt) |
| 15:53.50 | *** join/#debian RalphBa (~RalphBa@a.ralphs-tech.com) |
| 15:53.55 | *** join/#debian Tom01 (~tom@p5DDFEBC7.dip0.t-ipconnect.de) |
| 15:55.38 | *** join/#debian boris_t__ (~boris_t@82.112.41.207) |
| 15:56.54 | *** join/#debian thustra (~x@37.218.245.33) |
| 15:57.35 | pierrot | teraflops: sorry for the late response, I was rebooting. I purged sddm and reinstall it and it worked |
| 15:58.00 | pierrot | (with a different appearance than in the first time, but works) |
| 15:58.44 | teraflops | pierrot: np, glad you got it working |
| 15:59.09 | pierrot | and also, let me select ratposion, plasma and dwm as I have before the upgrade \o/ |
| 15:59.18 | pierrot | s/have/had/ |
| 15:59.42 | *** join/#debian Cabanossi (~Cabanossi@p57995BB5.dip0.t-ipconnect.de) |
| 15:59.47 | *** join/#debian mibo (~mibo@ip-89-103-85-113.net.upcbroadband.cz) |
| 15:59.55 | teraflops | pierrot: there are several theme packages you can install for sddm iirc |
| 16:00.02 | *** join/#debian v01t (~v01t@p4FE44AFB.dip0.t-ipconnect.de) |
| 16:00.32 | *** join/#debian Walakea (~Thunderbi@bband-dyn174.178-41-227.t-com.sk) |
| 16:01.40 | pierrot | thanks teraflops :) |
| 16:01.58 | *** join/#debian dontknow (~dontknow@unaffiliated/dontknow) |
| 16:02.28 | *** join/#debian Night-Shade (~tim@153.27.187.81.in-addr.arpa) |
| 16:04.32 | *** join/#debian cadillac__ (~omab@r167-61-73-157.dialup.adsl.anteldata.net.uy) |
| 16:04.33 | *** join/#debian boris_t_ (~boris_t@82.112.41.207) |
| 16:05.39 | *** join/#debian password4 (~password@192-143-225-229.ip.airmobile.co.za) |
| 16:05.57 | *** join/#debian NightShade (~tim@81.187.27.153) |
| 16:06.09 | *** join/#debian password4 (~password@unaffiliated/password2) |
| 16:07.07 | *** join/#debian RalphBa (~RalphBa@a.ralphs-tech.com) |
| 16:07.53 | *** join/#debian boris_t (~boris_t@82.112.41.207) |
| 16:10.29 | password4 | anyone ever experience errors copying form an mtp device? |
| 16:11.06 | password4 | it would just randomly stop for me |
| 16:11.10 | *** join/#debian Lal_ (uid175029@gateway/web/irccloud.com/x-rxcekcvnrmdvtmbu) |
| 16:16.55 | *** join/#debian Achylles (~Achylles@191.19.89.54) |
| 16:17.33 | jhutchins_wk | password4: Yes, I've seen that. |
| 16:17.49 | jhutchins_wk | password4: My work-around at the time was to move the sd card to another device. |
| 16:19.44 | *** join/#debian err404 (~err404@ns300916.ip-91-121-67.eu) |
| 16:20.14 | *** join/#debian timahvo1 (~rogue@197.232.18.157) |
| 16:22.38 | *** join/#debian kbeflo (~kbeflo___@180.191.112.196) |
| 16:24.06 | *** join/#debian dionysus69 (~Thunderbi@unaffiliated/dionysus69) |
| 16:25.33 | *** join/#debian err404 (~err404@163.172.158.42) |
| 16:27.38 | *** join/#debian peterbec` (~peterbeci@75-142-96-216.static.mtpk.ca.charter.com) |
| 16:28.02 | password4 | ah |
| 16:28.09 | password4 | Its onboard for me |
| 16:28.17 | *** join/#debian silverhom (~silverhom@c83-252-236-239.bredband.comhem.se) |
| 16:28.21 | *** join/#debian boris_t (~boris_t@82.112.41.207) |
| 16:29.00 | *** mode/#debian [+l 1708] by debhelper |
| 16:29.44 | *** join/#debian Cabanossi (~Cabanossi@p57995BB5.dip0.t-ipconnect.de) |
| 16:30.13 | *** join/#debian woyzeck_ (~woyzeck@187.255.242.183) |
| 16:31.23 | *** join/#debian trac3r_ (~chrx@173.208.100.116) |
| 16:32.20 | *** join/#debian f10 (~flo@ip5b40643f.dynamic.kabel-deutschland.de) |
| 16:34.13 | *** join/#debian boris_t (~boris_t@363103629.convex.ru) |
| 16:34.35 | *** join/#debian Twinkletoes (~chatzilla@cpc69053-oxfd25-2-0-cust887.4-3.cable.virginm.net) |
| 16:34.42 | *** join/#debian Violinist (~Violinist@216-14-19-83.static-ip.telepacific.net) |
| 16:36.32 | pierrot | At startup, I'm getting this error message: http://sprunge.us/ccVb. That didn't happen before the upgrade. |
| 16:36.48 | pierrot | Is it important? |
| 16:37.15 | towo` | install firmware-amd-graphics |
| 16:37.18 | pierrot | (those lines are from dmesg) |
| 16:37.24 | towo` | and yes, it is important |
| 16:37.54 | *** join/#debian jordanm (~jordanm@pdpc/supporter/active/jordanm) |
| 16:38.29 | *** join/#debian vaidik (~vaidik@122.162.19.27) |
| 16:38.36 | *** join/#debian graytron (~tero@81.197.159.217) |
| 16:38.43 | *** join/#debian password8 (~password@169-1-48-51.ip.afrihost.co.za) |
| 16:38.52 | pierrot | thanks towo` |
| 16:39.02 | *** join/#debian pacha (~user@unaffiliated/pacha) |
| 16:39.49 | *** join/#debian boris_t_ (~boris_t@82.112.41.207) |
| 16:39.57 | *** join/#debian Walakea (~Thunderbi@bband-dyn174.178-41-227.t-com.sk) |
| 16:40.27 | *** join/#debian dayten (~gnoid@188.170.196.68) |
| 16:40.37 | *** join/#debian HarveyPwca (~HarveyPwc@ip-64-134-173-214.public.wayport.net) |
| 16:40.50 | *** join/#debian boris_t__ (~boris_t@363103629.convex.ru) |
| 16:41.29 | *** join/#debian mzf (~mzf@unaffiliated/mzf) |
| 16:42.41 | *** join/#debian patterson_ (~patterson@98.210.76.223) |
| 16:43.01 | pierrot | also, when it's checked one of the partitions, it diplays the message "Superblock last write time is in the future. (by less than a day, probably due to the hardware clock being incorrectly set)" |
| 16:43.09 | *** join/#debian fFamousfFatman (~El@2a01:e35:8ad7:6b60:36f8:cdc2:e611:f44a) |
| 16:44.31 | *** part/#debian mike25 (~mike25@unaffiliated/mike25) |
| 16:44.45 | *** part/#debian ralpheeee (~ralpheeee@gateway/vpn/privateinternetaccess/ralpheeee) |
| 16:44.58 | *** join/#debian greycat (~wooledg@remote.wooledge.org) |
| 16:45.03 | towo` | pierrot, then fix that |
| 16:49.02 | *** join/#debian LtL (~ltl@unaffiliated/ltl) |
| 16:50.19 | *** join/#debian err404 (~err404@163.172.158.42) |
| 16:50.31 | *** join/#debian EnklereIT (~Christian@2a02:fe0:c150:4aa0:6202:b4ff:fe99:9833) |
| 16:51.14 | *** join/#debian flowmode (~user@gateway/tor-sasl/flowmode) |
| 16:51.43 | *** join/#debian catsup (~d@ps38852.dreamhost.com) |
| 16:51.53 | *** join/#debian cdown (~cdown@199.201.66.0) |
| 16:52.00 | *** join/#debian h0nus (~h0nus@47-35-27-205.dhcp.snlo.ca.charter.com) |
| 16:52.01 | *** join/#debian zarkos_ (~anna@137.59.252.174) |
| 16:52.17 | *** join/#debian rlange (~rlange@static-108-16-207-87.phlapa.fios.verizon.net) |
| 16:52.26 | Violinist | mine say iomen region |
| 16:52.30 | Violinist | and takes forver |
| 16:52.39 | Violinist | wth |
| 16:52.54 | *** join/#debian catsup (d@ps38852.dreamhost.com) |
| 16:53.20 | h0nus | has anyone had success with thunderbolt eGPU under Debian (on Mac hw, obviously)? |
| 16:54.08 | *** join/#debian patterson_ (~patterson@98.210.76.223) |
| 16:54.43 | *** join/#debian password4 (~password@192-143-56-213.ip.airmobile.co.za) |
| 16:54.48 | Resiliente | what's the difference between adding some user to the sudo system group and giving him execute permissions on a one-by-one basis? if I want some users to make admisnitrative duties, what group sohuld I add them to? |
| 16:55.19 | greycat | Users in the sudo group can run *everything* with sudo. Unless you make other changes. |
| 16:55.29 | *** join/#debian tobh___ (~tobh@c-71-63-147-168.hsd1.wa.comcast.net) |
| 16:56.10 | *** join/#debian soee_ (~soee@bhp141.neoplus.adsl.tpnet.pl) |
| 16:56.26 | *** join/#debian BluesKaj (~Blues@unaffiliated/blueskaj) |
| 16:56.39 | nkuttler | Resiliente: define admisnitrative duties |
| 16:56.59 | *** join/#debian monsterco (~monsterco@toroon474aw-lp130-04-70-48-151-166.dsl.bell.ca) |
| 16:57.06 | monsterco | what is cgamanger? it's using 100% of my cpu |
| 16:57.11 | *** join/#debian password4 (~password@unaffiliated/password2) |
| 16:58.11 | *** join/#debian singer22 (~singer22@gateway/tor-sasl/singer22) |
| 16:58.15 | Resiliente | nkuttler, a good question, apt-get update && dist-upgrade, adding/deleting users and maybe adding and removing disk drives (if you suggest other profiles I will listen :) ) |
| 16:58.38 | *** join/#debian AimHere (~David@cpc102316-sgyl38-2-0-cust632.18-2.cable.virginm.net) |
| 16:58.41 | *** join/#debian danwellby (~danwellby@gateway/vpn/privateinternetaccess/danwellby) |
| 16:58.44 | *** join/#debian binaryc (~binaryc@c-73-44-107-113.hsd1.il.comcast.net) |
| 16:59.08 | nkuttler | Resiliente: soudns like you should whitelist programs one by one |
| 16:59.18 | nkuttler | Resiliente: and look into visudo for fstab i guess |
| 16:59.28 | *** join/#debian ellenium1 (~Thunderbi@108.114.82.175) |
| 16:59.40 | *** join/#debian monpocchi (~monpocchi@unaffiliated/monpocchi) |
| 16:59.56 | Resiliente | nkuttler, and the sudo group what isfor |
| 17:00.19 | nkuttler | Resiliente: what greycat said |
| 17:00.48 | *** join/#debian password8 (~password@169-1-62-71.ip.afrihost.co.za) |
| 17:00.56 | Resiliente | nku, ah, I did not read what greycat said :) |
| 17:01.29 | Resiliente | nkuttler, , ah, I did not read what greycat said :) |
| 17:01.53 | *** join/#debian hlmjr (~herbmille@50-248-67-123-static.hfc.comcastbusiness.net) |
| 17:02.20 | *** join/#debian deznuts (uid92154@gateway/web/irccloud.com/x-eupzrdjsxaqnquzv) |
| 17:02.57 | Resiliente | what other groups? what are they for? where can I read about them? |
| 17:05.48 | *** join/#debian Bock (~bocaneri@about/linux/staff/sauvin) |
| 17:07.02 | Resiliente | mmm waht the group staff used for? |
| 17:07.40 | *** join/#debian pacha (~user@unaffiliated/pacha) |
| 17:10.25 | EmleyMoor | Resiliente: You could use it to help define who can use sudo, for example |
| 17:10.46 | *** join/#debian password8 (~password@unaffiliated/password2) |
| 17:11.47 | Resiliente | in https://wiki.debian.org/SystemGroups is said that " Allows users to add local modifications to the system (/usr/local) without needing root privileges"... hpw can this help define who can use sudo? |
| 17:12.10 | *** join/#debian mtn (~mtn@unaffiliated/mtn) |
| 17:14.38 | *** join/#debian CrowX- (~CrowX-@77.28.44.139) |
| 17:14.46 | CrowX- | what would happen if I restart cgmanager process? |
| 17:14.46 | CrowX- | <CrowX-> service cgmanager restart |
| 17:15.51 | *** join/#debian password4 (~password@192-143-164-153.ip.airmobile.co.za) |
| 17:16.02 | *** join/#debian password4 (~password@unaffiliated/password2) |
| 17:16.25 | *** join/#debian youngvision (~youngvisi@lou27-1-88-162-144-46.fbx.proxad.net) |
| 17:16.31 | EmleyMoor | Resiliente: Well, you could reference it in the sudoers file |
| 17:17.08 | *** join/#debian BluesKaj (~Blues@gateway/vpn/privateinternetaccess/blueskaj) |
| 17:17.27 | *** join/#debian s00x (594ce6f4@gateway/web/freenode/ip.89.76.230.244) |
| 17:18.29 | Resiliente | EmleyMoor, mmmI don't understand what this group can and cannot do... |
| 17:18.36 | *** part/#debian s00x (594ce6f4@gateway/web/freenode/ip.89.76.230.244) |
| 17:19.15 | EmleyMoor | Resiliente: as standard they have write access to /usr/local. |
| 17:19.41 | Resiliente | EmleyMoor, and this allows them to... install software? compile software? or what? |
| 17:20.47 | *** join/#debian abhikpal (~abhikpal@202.142.67.221) |
| 17:20.58 | EmleyMoor | Resiliente: They could, at least in theory, install software they have compiled there, or at least work on its source code and compile it |
| 17:21.13 | *** join/#debian ysfrb (~ysfrb@LFbn-1-4850-201.w92-171.abo.wanadoo.fr) |
| 17:21.32 | EmleyMoor | It would depend entirely on permissions in place |
| 17:21.52 | Resiliente | so they are the... ahem... install-ad-hoc-software-doers (hehe) right? |
| 17:22.45 | *** join/#debian Atomic_wiu9b (~atomic@95.98.36.72) |
| 17:22.52 | *** join/#debian sim590 (~sim590@96-127-219-18.qc.cable.ebox.net) |
| 17:23.50 | *** join/#debian p1x331 (~pixel@2a02:a03f:1298:d900:c975:3a18:b0e3:fd2f) |
| 17:23.51 | EmleyMoor | That's what the wiki suggests |
| 17:23.59 | mrr0butt | https://youtu.be/bffHSQy4hmw?t=25 |
| 17:24.32 | *** join/#debian ment0s (~devel@cpc80985-perr17-2-0-cust162.19-1.cable.virginm.net) |
| 17:24.34 | ment0s | hi, is there any way for iscsi initiator to have similar behaviour to "hard" option in nfs ? meaning that it will always keep on trying to connect to the target ? |
| 17:25.13 | Resiliente | so the sudo group is "line root", the staff group is "compile-from-external" and the group adm is for reading logs (and I suppose dmesg) |
| 17:26.57 | Resiliente | EmleyMoor, so the sudo group is "line root", the staff group is "compile-from-external" and the group adm is for reading logs (and I suppose dmesg) |
| 17:27.35 | *** join/#debian BluesKaj (~Blues@gateway/vpn/privateinternetaccess/blueskaj) |
| 17:27.54 | *** join/#debian Addp (~Addp@LFbn-1-4850-201.w92-171.abo.wanadoo.fr) |
| 17:28.26 | *** join/#debian peterbec` (~peterbeci@75-142-96-216.static.mtpk.ca.charter.com) |
| 17:29.00 | *** mode/#debian [+l 1715] by debhelper |
| 17:30.11 | *** join/#debian s00x (594ce6f4@gateway/web/freenode/ip.89.76.230.244) |
| 17:30.24 | *** join/#debian humbot (~i@unaffiliated/humbag) |
| 17:30.26 | s00x | hey, how can I change default mountpoint /media to /home/myMounts ? |
| 17:30.30 | s00x | is that even possible? |
| 17:31.01 | *** join/#debian GJdan (~dan@d75-157-130-131.bchsia.telus.net) |
| 17:31.08 | *** join/#debian asyn (~asyn@46.224.126.145) |
| 17:31.12 | *** join/#debian fyrril (~fyrril@2605:a601:7014:1800:1df:f424:2778:ffa1) |
| 17:31.38 | *** join/#debian questions (~questions@170.239.236.2) |
| 17:32.07 | mrr0butt | in /etc/fstab? |
| 17:33.04 | *** join/#debian tartampion (~guillaume@oikos.autre.org) |
| 17:33.20 | s00x | mrr0butt: I mean, for examle when I plug in external usb |
| 17:34.01 | jelly | s00x, stupid way: rmdir /media; ln -s /home/myMounts /media |
| 17:34.13 | *** join/#debian hele (~hele@a88-115-23-37.elisa-laajakaista.fi) |
| 17:35.21 | s00x | i got alreayd some entries in fstab to mount only cdrooms |
| 17:35.25 | s00x | to /media |
| 17:35.29 | s00x | i guess i also has to fix them? |
| 17:35.32 | s00x | before rmdir media ? |
| 17:35.54 | *** join/#debian thurin (thurin@thurin.org) |
| 17:36.04 | jelly | no, but make sure nothing is mounted under /media at that time |
| 17:36.25 | s00x | what could have happend if it was? |
| 17:36.30 | jelly | or yes, make sure all mountpoints exist |
| 17:36.43 | jelly | rmdir only works when a directory is empty |
| 17:37.13 | *** join/#debian CapsAdmin (~CapsAdmin@2001:4648:3832:0:fcbe:4137:ac22:a8b4) |
| 17:37.14 | jelly | so that the above as a general idea, not literal commands to make things work |
| 17:38.10 | *** join/#debian Haudegen (~quassel@178.115.237.87) |
| 17:38.32 | *** join/#debian vaidik (~vaidik@122.162.19.27) |
| 17:38.45 | *** join/#debian jurisl__ (~Yuriy@broadband-46-188-127-66.2com.net) |
| 17:39.27 | mrr0butt | udev rule bei disk uuid maybe? |
| 17:39.43 | s00x | ok, thank you! |
| 17:39.46 | mrr0butt | *by |
| 17:40.23 | *** join/#debian TrueDD (~truedd@unaffiliated/truedd) |
| 17:42.18 | *** join/#debian UnixMonky (~UnixMonky@64.27.210.98) |
| 17:43.19 | *** join/#debian aksn (~Username@144.178.138.108) |
| 17:44.34 | *** join/#debian h1t3sh (~h1t3sh@122.162.190.50) |
| 17:46.26 | *** join/#debian j0hn (~h1t3sh@182.69.177.130) |
| 17:46.53 | *** join/#debian rkta (~kt@p5DE866C0.dip0.t-ipconnect.de) |
| 17:49.23 | *** join/#debian h1t3sh- (~h1t3sh@182.69.1.89) |
| 17:49.55 | *** join/#debian pacha (~user@unaffiliated/pacha) |
| 17:50.37 | *** join/#debian Nekojimi (~jimj316@176.248.117.245) |
| 17:52.15 | *** join/#debian vjacob (~vjacob@82.103.135.167) |
| 17:53.04 | *** join/#debian bytesquid (~bytesquid@ec2-52-53-194-217.us-west-1.compute.amazonaws.com) |
| 17:53.35 | *** join/#debian clemens3 (~clemens@77-56-176-228.dclient.hispeed.ch) |
| 17:53.48 | *** join/#debian multi_io (~olaf@x55b24b59.dyn.telefonica.de) |
| 17:54.03 | *** join/#debian h1t3sh (~h1t3sh@182.69.164.217) |
| 17:54.22 | *** join/#debian Nh3xus (~Nh3xus@unaffiliated/nh3xus) |
| 17:55.14 | *** join/#debian BeamWatcher (~gashead76@208.117.74.236) |
| 17:55.14 | *** join/#debian Almtesh (~Almtesh@unaffiliated/almtesh) |
| 17:57.31 | *** join/#debian kryptoz (~kryptoz@49.207.60.194) |
| 17:58.52 | *** join/#debian Hexagenic (~Hexagenic@81-237-132-138-no71.tbcn.telia.com) |
| 18:00.11 | *** join/#debian Geekologist (~geek@207.154.216.115) |
| 18:00.11 | *** join/#debian sh00p (~z@84.216.39.31) |
| 18:00.16 | *** join/#debian Colti (Miramar-FL@unaffiliated/colti) |
| 18:00.19 | *** join/#debian McNam (~McNam@199.116.114.88) |
| 18:03.13 | *** join/#debian kobain (~kobain@unaffiliated/kobain) |
| 18:03.34 | *** join/#debian McNam (~McNam@199.116.114.88) |
| 18:04.13 | *** join/#debian netzfisch (~Thunderbi@x55b0641b.dyn.telefonica.de) |
| 18:04.48 | *** join/#debian err404 (~err404@163.172.158.42) |
| 18:05.00 | *** join/#debian Murda (~Murda@cpc88596-newt36-2-0-cust988.19-3.cable.virginm.net) |
| 18:05.19 | *** join/#debian kion (~kion@unaffiliated/kion) |
| 18:05.25 | *** join/#debian satbyy (satbyy@unaffiliated/satbyy) |
| 18:05.41 | *** join/#debian McNam (~McNam@199.116.114.88) |
| 18:05.43 | Murda | I changed LUKS encryption passphrase, but old 1 seems also still working. |
| 18:05.56 | Murda | How can I invoke old passphrase. |
| 18:06.39 | *** join/#debian EnklereIT (~Christian@178.73.218.124) |
| 18:06.54 | *** join/#debian orkan (~orkan@91.202.125.3) |
| 18:07.13 | *** join/#debian Murda (~Murda@cpc88596-newt36-2-0-cust988.19-3.cable.virginm.net) |
| 18:07.53 | *** join/#debian Levure (~quassel@91.179.6.172) |
| 18:07.58 | *** join/#debian tymczenko (~tymczenko@unaffiliated/tymczenko) |
| 18:08.44 | *** join/#debian dionysus70 (~Thunderbi@unaffiliated/dionysus69) |
| 18:08.47 | Resiliente | exit |
| 18:09.42 | *** join/#debian Comstock (~Comstock@unaffiliated/comstock) |
| 18:13.00 | *** join/#debian kooldavi (~kooldavi@p5DDD6668.dip0.t-ipconnect.de) |
| 18:13.01 | *** join/#debian Colti (Miramar-FL@unaffiliated/colti) |
| 18:16.11 | *** join/#debian alfred_ (~quassel@2001:470:1f0b:3d5::1006) |
| 18:16.27 | *** join/#debian wilbert (~wilbert@unaffiliated/wilbert) |
| 18:17.07 | mrr0butt | luks has 10 slots, you can use 10 paspharases/keyfiles |
| 18:17.39 | *** join/#debian cliluw (~cliluw@unaffiliated/cliluw) |
| 18:18.30 | mrr0butt | cryptsetup luksRemoveKey /dev/<device> |
| 18:18.54 | *** join/#debian cliluw (~cliluw@unaffiliated/cliluw) |
| 18:19.30 | *** join/#debian kw21 (~kw21@D978E830.cm-3-1d.dynamic.ziggo.nl) |
| 18:19.40 | mrr0butt | you can check how many slots are used |
| 18:19.48 | mrr0butt | cryptsetup luksDump /dev/<dev> |
| 18:20.15 | *** join/#debian Geekologist (~geek@207.154.216.115) |
| 18:20.32 | *** join/#debian j3nr0 (~Mutter@36-233-63-100.dynamic-ip.hinet.net) |
| 18:21.05 | *** join/#debian in1t3r_ (~in1t3r@unaffiliated/lordshiva) |
| 18:21.37 | mrr0butt | if you dont have the old key you can disable the slot with new key |
| 18:21.52 | mrr0butt | to remove the old key u need to enterthe key |
| 18:23.01 | *** join/#debian aruns (~indistylo@122.171.45.8) |
| 18:23.09 | *** join/#debian err404 (~err404@163.172.158.42) |
| 18:23.31 | *** join/#debian SuperTramp83 (~SuperTram@unaffiliated/supertramp83) |
| 18:24.15 | *** join/#debian satbyy (satbyy@unaffiliated/satbyy) |
| 18:25.53 | *** join/#debian Andy80_ (~andy80@ubuntu/member/andy80) |
| 18:26.33 | *** join/#debian raynold (uid201163@gateway/web/irccloud.com/x-yrhkbveywbtcyyqe) |
| 18:27.27 | *** join/#debian in1t3r_ (~in1t3r@unaffiliated/lordshiva) |
| 18:29.00 | *** mode/#debian [+l 1721] by debhelper |
| 18:29.36 | *** join/#debian soee__ (~soee@afny165.neoplus.adsl.tpnet.pl) |
| 18:30.10 | *** join/#debian Brigo (~Brigo@43.10.60.178.dynamic.reverse-mundo-r.com) |
| 18:30.38 | *** join/#debian Delta-One (~zero@2001:2002:51e2:7ba1:6391:acc7:b55f:c617) |
| 18:32.21 | *** join/#debian Drugo (~Drugo@62-11-1-95.dialup.tiscali.it) |
| 18:39.04 | *** join/#debian j3nr0 (~Mutter@36-233-63-100.dynamic-ip.hinet.net) |
| 18:40.47 | *** join/#debian L00thar (~L00thar@dhcp-bc-4d-fb-f0-7e-e1.cpe.sourcecable.net) |
| 18:40.57 | *** join/#debian whiskey9 (~blargh@cos-128-210-107-25.science.purdue.edu) |
| 18:41.12 | *** join/#debian ChubaDuba (~ChubaDuba@87.117.12.104) |
| 18:41.31 | *** join/#debian teroshan (~teroshan@2a01cb0405b9ee001acf5efffef40996.ipv6.abo.wanadoo.fr) |
| 18:41.48 | *** join/#debian metaphysician (~meta-code@unaffiliated/meta-coder) |
| 18:43.14 | *** join/#debian borrougagnou (~borrougag@AAubervilliers-655-1-88-21.w86-218.abo.wanadoo.fr) |
| 18:43.51 | *** join/#debian teroshan (~teroshan@2a01cb0405b9ee001acf5efffef40996.ipv6.abo.wanadoo.fr) |
| 18:44.59 | *** join/#debian j3nr0 (~Mutter@36-233-63-100.dynamic-ip.hinet.net) |
| 18:45.00 | *** join/#debian Cabanossi (~Cabanossi@p57995BB5.dip0.t-ipconnect.de) |
| 18:47.33 | *** join/#debian cdown (~cdown@my83-216-88-243.cust.relish.net) |
| 18:49.17 | *** join/#debian eshlox (uid44222@gateway/web/irccloud.com/x-gyvdrsyihthuoryt) |
| 18:53.04 | *** join/#debian alexertech (~ab@unaffiliated/alexertech) |
| 18:53.46 | *** join/#debian OS-25054 (~Mike@p57B3239F.dip0.t-ipconnect.de) |
| 18:53.52 | *** join/#debian BluesKaj (~Blues@gateway/vpn/privateinternetaccess/blueskaj) |
| 18:54.10 | *** join/#debian holmgren (magnus@h-70-93.A163.priv.bahnhof.se) |
| 18:55.51 | *** join/#debian ASpacy (~JeDa@lunar.spacytime.net.ve) |
| 18:56.11 | *** part/#debian metaphysician (~meta-code@unaffiliated/meta-coder) |
| 18:59.33 | *** join/#debian AimHere (~David@2001:67c:10ec:4b80::9d) |
| 18:59.37 | *** join/#debian ralinux (~ralinux@31.4.221.68) |
| 18:59.53 | *** join/#debian yareckonirc (~yareckoni@p578E7235.dip0.t-ipconnect.de) |
| 19:03.37 | *** join/#debian buffffal00 (~buffal0@47.201.64.168) |
| 19:04.24 | *** join/#debian Gaxpaxxo (~Gazpacho@42.red-2-136-251.dynamicip.rima-tde.net) |
| 19:05.59 | *** join/#debian gpcf (~user@p20030084AD321001D3B1E15D8A2D1EB4.dip0.t-ipconnect.de) |
| 19:06.10 | *** join/#debian Se-bash (~seba@unaffiliated/se-bash) |
| 19:06.57 | gpcf | hi, i have installed gnome-software on stretch with MATE, and it doesn't install any software, besides, it appears to be that apt forgot all pubkeys |
| 19:07.36 | gpcf | reinstalling debian-archive-keyring didn't fix this issue |
| 19:07.54 | gpcf | I ran gnome-software both as a regular user and as root |
| 19:07.54 | *** join/#debian sidetracking (~quassel@99-101-249-43.lightspeed.rcsntx.sbcglobal.net) |
| 19:08.40 | gpcf | does anyone know how i can setup gnome-software correctly? |
| 19:09.16 | greycat | gpcf: do you have an /etc/apt/trusted.gpg file, and if so, how large is it? |
| 19:11.28 | *** join/#debian alexertech_ (~ab@181-161-252-84.baf.movistar.cl) |
| 19:11.45 | gpcf | yes, there is one |
| 19:11.53 | greycat | How many bytes? |
| 19:12.19 | greycat | (how many teeth must a man pull before he can get to the root...) |
| 19:12.54 | *** join/#debian orkan (~orkan@user-94-254-131-225.play-internet.pl) |
| 19:12.56 | gpcf | no, sorry, no there isn't |
| 19:13.11 | gpcf | i just checked again, it's running on another computer |
| 19:13.22 | gpcf | and reinstalling debian-archive-keyring does not create it again |
| 19:13.40 | gpcf | there is a trusted.gpg.d directory, though, but it is empty |
| 19:13.49 | *** join/#debian die7 (~nino@p548A5624.dip0.t-ipconnect.de) |
| 19:13.50 | greycat | Was going to suggest removing it, per a recent debian-user thread. *shrug* |
| 19:14.08 | gpcf | apt-key list returns nothing |
| 19:15.27 | die7 | stupid question (I know it's wrong channel) how to continue the bash script after su - (need to reintialze login since new group added) |
| 19:16.19 | gpcf | die7: what do you mean? Restoring the session after typing "exit"? |
| 19:16.31 | *** join/#debian Se-bash (~seba@unaffiliated/se-bash) |
| 19:16.41 | jhutchins_wk | die7: Possibly how to exit su? |
| 19:16.42 | greycat | die7: you can't just stick su in the middle of a script. That's not how it works. su runs a single command (which could be a SECOND whole script) with altered UID |
| 19:16.58 | greycat | It does not mean "become root in the current process and continue". |
| 19:17.04 | greycat | It runs a CHILD process. |
| 19:17.27 | die7 | gpcf: OK, is there any poss to reintilaze groups for root instead of su - |
| 19:18.53 | greycat | Split the script into two scripts. |
| 19:19.00 | *** mode/#debian [+l 1713] by debhelper |
| 19:19.01 | greycat | su root -c ./second-script |
| 19:19.06 | die7 | greycat: gpcf has right with second statement...my script will install and deploy docker, add user root to docker group ..and should continue with docker image creation and run it on end |
| 19:19.34 | greycat | Oh, docker. I'm done. I won't /ignore you because this #debian and not #bash, but... still, I'm done. Will not help. Sorry. |
| 19:19.34 | die7 | greycat: yeah, but I wish to do it in one kick |
| 19:20.01 | gpcf | su twice? |
| 19:20.18 | die7 | gpcf: no 1x |
| 19:20.27 | jhutchins_wk | die7: the system shouldn't care what groups root is or is not a member of. |
| 19:21.17 | die7 | jhutchins_wk: well yes and no, if the root is not in the group it will not execute docker commands |
| 19:21.55 | gpcf | does anyone know what may have caused my problem? |
| 19:22.02 | die7 | jhutchins_wk: so I need to reint. login for group |
| 19:22.24 | die7 | gpcf: what is your prob? |
| 19:23.05 | gpcf | somehow all apt gpg keys were deleted and reinstalling debian-archive-keyring won't work |
| 19:23.15 | gpcf | and gnome-software doesn't work |
| 19:23.29 | *** join/#debian Murda_ (~Murda@120-49-46-176.dyn.estpak.ee) |
| 19:24.42 | *** join/#debian frostschutz (~frostschu@x2f66fef.dyn.telefonica.de) |
| 19:25.03 | die7 | gpcf: so nothing provided when you run apt-key list |
| 19:25.27 | *** join/#debian Seto_Kaiba (~Hunterkll@2001:470:8b06:100:7882:9922:e509:4169) |
| 19:25.35 | *** join/#debian gagrio (~gagrio@ip-78-102-117-95.net.upcbroadband.cz) |
| 19:26.09 | gpcf | no, nothing |
| 19:27.00 | *** join/#debian fr0tzed (~fr0tzed@194.135.90.220) |
| 19:27.01 | *** join/#debian fr0tzed (~fr0tzed@unaffiliated/fr0tzed) |
| 19:27.35 | jhutchins_wk | gpcf: WHat if you purge debian-archive-keyring, then install it? |
| 19:28.06 | gpcf | debian-archive-keyring takes lots of stuff with it, including apt |
| 19:28.21 | gpcf | how do i do this without removing dependencies? |
| 19:28.36 | die7 | gpcf: is your folder /etc/apt/trusted.gpg.d empty? |
| 19:29.02 | gpcf | yes |
| 19:30.48 | *** join/#debian ToBeCloud (uid51591@wikimedia/ToBeFree) |
| 19:31.32 | *** part/#debian LorD_n1c0w1 (~igorhenri@187.45.177.18) |
| 19:31.41 | jelly | gpcf, how, exactly, are you trying to reinstall that package? |
| 19:32.37 | *** join/#debian disi (~quassel@c-76-104-201-218.hsd1.wa.comcast.net) |
| 19:32.47 | *** join/#debian reekow (~reekow@ip68-99-23-136.om.om.cox.net) |
| 19:33.36 | die7 | gpcf: then you need to add it manualy |
| 19:34.51 | *** join/#debian Chinesium (~Chinesium@2a00:23c5:8781:ac00:9c81:9a95:c45e:25f5) |
| 19:35.16 | *** join/#debian feneco (uid135851@gateway/web/irccloud.com/x-ayewkppbrcbosexn) |
| 19:35.25 | *** join/#debian GJdan (~dan@gateway/vpn/privateinternetaccess/gjdan) |
| 19:35.46 | *** join/#debian aswen (~aswen@lochem.swen.nu) |
| 19:36.03 | *** join/#debian abhikpal (~abhikpal@202.142.67.221) |
| 19:36.31 | gpcf | apt-get install --reinstall debian-archive-keyring |
| 19:36.45 | greycat | you will probably have to download it by hand and dpkg -i |
| 19:36.56 | *** join/#debian buffal0 (~buffal0@162.216.105.134) |
| 19:37.07 | greycat | apt-get --print-uris --reinstall install debian-archive-keyring # may help |
| 19:37.13 | *** join/#debian dArK_IcE (~lawl@a95-92-100-122.cpe.netcabo.pt) |
| 19:37.22 | *** join/#debian nuno_nunes (~PC@a83-132-51-17.cpe.netcabo.pt) |
| 19:37.38 | *** join/#debian katyucha_ (~katyucha@68.149.2.109.rev.sfr.net) |
| 19:38.53 | gpcf | I'll try that |
| 19:40.36 | *** join/#debian robotroll (~robotroll@unaffiliated/robotroll) |
| 19:40.38 | *** join/#debian jackNemrod (~Thunderbi@217.74.105.4) |
| 19:40.44 | *** part/#debian spuc (~spuc@2001:41d0:a:f3f1::1) |
| 19:41.43 | gpcf | tried that, same story |
| 19:41.54 | greycat | !exact |
| 19:41.54 | dpkg | Please tell us exactly what you typed, and exactly what the error was. Please use a <pastebin> like http://paste.debian.net/ to show long output and, where possible, have the output in English (see <localised errors>). |
| 19:42.21 | aswen | Hi there, I want make a preseed partition recipe for use on a UEFI enabled server. That means it needs an efi type partition. I added that to my recipe. The rest of the disk should be added to an LVM partition and I want to create the rest of my partitions within that as a logical volume. Is it possible? If so: how? |
| 19:42.25 | *** join/#debian tymczenko (~tymczenko@unaffiliated/tymczenko) |
| 19:42.49 | die7 | gpcf: https://www.pastiebin.com/#&togetherjs=2gMRDEh7pQ |
| 19:43.48 | die7 | gpcf: should solve the issue, I just deleted keys, getting error with update, adding keys manualy, update runing again |
| 19:44.52 | *** join/#debian kaimo (~kaimo@host86-177-254-101.range86-177.btcentralplus.com) |
| 19:44.57 | *** join/#debian peewhy (~peewhy@80.215.85.53) |
| 19:45.13 | jhutchins_wk | die7: Please make a habit of using something other than pastebin.com, which is blocked (for good reason) by some networks. paste.debian.net is good. |
| 19:45.23 | *** join/#debian leexius (~leexius@2a01cb00078cc3004e72b9fffea307b3.ipv6.abo.wanadoo.fr) |
| 19:45.26 | *** join/#debian grumble (~grumble@freenode/staff/grumble) |
| 19:45.36 | greycat | pasteiebin.com != pastebin.com |
| 19:45.36 | die7 | jhutchins_wk: ok, sorry |
| 19:45.36 | *** join/#debian jnavila (~jnavila@2a01:e35:2ef1:f910:5006:1621:c385:7777) |
| 19:45.55 | jhutchins_wk | die7: Ah, pastiebin should be ok. |
| 19:45.59 | greycat | But near as I can tell, this "pastiebin.com" is WORSE> |
| 19:46.19 | aswen | I created a paste with the recipe I have: https://paste.debian.net/974999/ |
| 19:46.24 | greycat | I don't see any content at all. Does it require Javascript, like hate-bin? |
| 19:47.33 | *** join/#debian relaxed (~relaxed@unaffiliated/relaxed) |
| 19:48.33 | *** join/#debian tymczenko (~tymczenko@unaffiliated/tymczenko) |
| 19:49.25 | die7 | jhutchins_wk: tootaly forg. to use debian pastie, thnak you for refresh |
| 19:50.28 | *** join/#debian crownose (~weechat@2a02:8010:6173:0:2ab2:bdff:fe2b:c456) |
| 19:50.32 | *** join/#debian tymczenko (~tymczenko@unaffiliated/tymczenko) |
| 19:51.23 | aswen | when I use that recipe, everything becomes a partition on the disk, not a LVM as expected |
| 19:51.47 | *** join/#debian metax (~metax@gateway/tor-sasl/metax) |
| 19:52.03 | *** part/#debian leexius (~leexius@2a01cb00078cc3004e72b9fffea307b3.ipv6.abo.wanadoo.fr) |
| 19:52.10 | nvz | sawfish seems rather broken on stretch, not only does it seem to error on startup saying no such file: gnome, assuming gnome usage, but half the bindings don't work. It won't detect Ctrl, Win key, middle or left clicks, and those are just the things I've tried that it can't seem to detect |
| 19:52.18 | gpcf | ok, now my apt-key stuff works |
| 19:53.48 | nvz | 18 |
| 19:53.49 | *** join/#debian damolima (~fucking_n@52.92-221-58.customer.lyse.net) |
| 19:53.59 | *** join/#debian borrougagnou (~borrougag@AAubervilliers-655-1-88-21.w86-218.abo.wanadoo.fr) |
| 19:54.23 | jhutchins_wk | ,info sawfish |
| 19:54.24 | judd | Package sawfish (x11, optional) in stretch/amd64: window manager for X11. Version: 1:1.11.90-1+b1; Size: 482.6k; Installed: 1462k; Homepage: http://sawfish.tuxfamily.org/; Screenshot: https://screenshots.debian.net/package/sawfish |
| 19:55.33 | *** join/#debian Tramp (~mt@46-126-140-160.dynamic.hispeed.ch) |
| 19:55.38 | *** join/#debian netzfisch (~Thunderbi@x55b0641b.dyn.telefonica.de) |
| 19:55.59 | gpcf | back to this gnome-software problem |
| 19:56.06 | gpcf | how do i get it to work |
| 19:56.13 | gpcf | i can't search for debian software |
| 19:56.17 | *** join/#debian n4dir (~user@p200300C403C89500021A4BFFFE4896D9.dip0.t-ipconnect.de) |
| 19:56.22 | die7 | gpcf: explain again pls issue with gnome |
| 19:56.40 | gpcf | i have installed gnome-software |
| 19:57.04 | *** join/#debian wilbert (~wilbert@unaffiliated/wilbert) |
| 19:57.09 | gpcf | it only lists installed software and gnome shell extensions (gnome isn't even installed, the computer runs mate) |
| 19:57.46 | jhutchins_wk | Have you tried aptitude in menu mode? |
| 19:58.21 | gpcf | i am trying to install a fancy frontend for dpkg |
| 19:58.45 | gpcf | it is for a friend who's getting her first linux system |
| 19:58.46 | greycat | ... you mean synaptic? |
| 19:58.57 | *** join/#debian kasbah (~kasbah@catv-80-98-15-79.catv.broadband.hu) |
| 19:59.08 | *** join/#debian peterbec` (~peterbeci@75-142-96-216.static.mtpk.ca.charter.com) |
| 19:59.59 | gpcf | synaptic seems like a bit cluttered |
| 20:00.13 | greycat | Then I don't know what program you mean. |
| 20:00.18 | *** join/#debian vjacob (~vjacob@82.103.135.167) |
| 20:00.28 | gpcf | i have no problem with it, but it's not as beginner-friendly as gnome-software seems to be |
| 20:00.31 | missmbob | i thought it had to be synaptic |
| 20:00.42 | gpcf | I'm actually talking about "gnome-software" |
| 20:00.45 | gpcf | it's called like that |
| 20:00.49 | greycat | ,v gnome-software |
| 20:00.50 | judd | Package: gnome-software on amd64 -- sid: 3.22.5-1; buster: 3.22.5-1; stretch: 3.22.5-1; experimental: 3.25.3-1 |
| 20:00.50 | kasbah | hi, i recently updated my system from jessy to stretch and my bluetooth headset and speaker stopped to work correctly. Sometimes, blueman-manager completely blocks the desktop |
| 20:00.58 | greycat | Never heard of it. |
| 20:01.03 | missmbob | that's no front end to dpkgg |
| 20:01.15 | greycat | Are you asking how to *run* it? Use the dpkg -L list and try to guess which thing to run. |
| 20:01.26 | *** join/#debian na1rb (~nairb@unaffiliated/na1rb) |
| 20:01.31 | greycat | Or see if it has documentation in /usr/share/doc/pkgname/ |
| 20:02.05 | gpcf | i am able to run it, but it does not list the packages |
| 20:02.20 | teraflops | kasbah: which DE/WM/DM are you running there? |
| 20:02.22 | greycat | *What* are you running? |
| 20:02.23 | jhutchins_wk | gpcf: Perhaps it needs the equivalent of apt update? |
| 20:02.41 | kasbah | teraflops: mainly kde, but it is the same issue with gnome, mate etc |
| 20:02.47 | *** join/#debian josecapurro (~jcapurro@host-242.172.52.190.copaco.com.py) |
| 20:02.50 | greycat | I mean, we probably won't know a damned thing about it but hey, you might getlucky. But we have to know what you are running. |
| 20:02.53 | teraflops | which DM? |
| 20:03.02 | gpcf | a fresh debian-MATE install and i have just installed "gnome-software" |
| 20:03.06 | kasbah | teraflops: sddm |
| 20:03.13 | greycat | gpcf: no, what are you *running*? What program? |
| 20:04.09 | *** join/#debian youngvision_ (~youngvisi@185.156.173.229) |
| 20:04.23 | *** join/#debian Kun (~McNam@93.169.83.140) |
| 20:04.32 | gpcf | it is actually called "gnome-software" |
| 20:04.44 | kasbah | teraflops: before update, it worked just fine |
| 20:04.48 | gpcf | https://packages.debian.org/stretch/gnome-software |
| 20:05.00 | greycat | https://manpages.debian.org/stretch/gnome-software/gnome-software.1.en.html |
| 20:05.05 | greycat | ... I give up. |
| 20:05.21 | teraflops | worked as in now it doesnt work, but it used to work? |
| 20:05.42 | kasbah | teraflops: on jessy, it used to work without a glitch |
| 20:05.55 | kasbah | teraflops: on stretch, it does not work properly |
| 20:05.56 | *** join/#debian rolig (~rolig@unaffiliated/rollig) |
| 20:05.59 | teraflops | ok |
| 20:06.16 | teraflops | kasbah: did you try just plain bluetoothctl? at least for checking if that's blueman's fault |
| 20:06.25 | jhutchins_wk | kasbah: Anything in the release notes about it? |
| 20:06.37 | gpcf | i think it is packageKit's fault |
| 20:06.44 | jelly | ,i gnome-software |
| 20:06.45 | judd | Package gnome-software (gnome, optional) in stretch/amd64: Software Center for GNOME. Version: 3.22.5-1; Size: 326.6k; Installed: 1555k; Homepage: https://wiki.gnome.org/Apps/Software; Screenshot: https://screenshots.debian.net/package/gnome-software |
| 20:06.52 | gpcf | which doesn't get the software list |
| 20:07.30 | greycat | The man page is clearly just a stub so the pkg maintainer can say "I have a man page" |
| 20:07.37 | gpcf | yeah |
| 20:07.44 | gpcf | it's like that with a lot of GUI stuff |
| 20:08.10 | gpcf | I found some resources on freedesktop.org, I'll try to work through them |
| 20:08.22 | gpcf | thank you for your help |
| 20:08.23 | kasbah | jhutchins_wk: I did not find anything so far in it |
| 20:08.23 | gpcf | bye |
| 20:09.02 | phogg | gpcf: sounds like maybe gnome-software is missing a plugin |
| 20:09.06 | *** join/#debian kharloss (~kharloss@86.120.155.62) |
| 20:09.49 | kasbah | teraflops: I succeeded to connect via bluetoothctl, but pulseaudio cannot use the device that way |
| 20:09.51 | kasbah | it tells a2dp sink unavailable or so |
| 20:11.08 | *** join/#debian Olufunmilayo (~Olufunmil@unaffiliated/olufunmilayo) |
| 20:11.10 | *** join/#debian catfat (~wm@2a04:1980:3100:1aac:e61d:2dff:feb1:48b0) |
| 20:11.22 | gpcf | the classic |
| 20:11.31 | gpcf | i rebooted and it's working now :D |
| 20:11.54 | catfat | wow biggest channel ive ever seen member wise. cool |
| 20:11.56 | greycat | Oh, Windows emulation. |
| 20:12.00 | catfat | my new idle spot |
| 20:12.06 | catfat | greycatfat |
| 20:12.20 | catfat | :D |
| 20:12.31 | catfat | wine? |
| 20:12.47 | *** join/#debian wakd (~wakd@unaffiliated/wakd) |
| 20:12.55 | greycat | Please stop spewing random wors. If you just want to chat, try #debian-offtopic. |
| 20:13.03 | *** part/#debian LorD_n1c0w (~rhodan@2804:1b0:f389:2ab8::3) |
| 20:13.21 | catfat | sure, sorry |
| 20:14.32 | *** join/#debian Haudegen (~quassel@178.115.237.87) |
| 20:14.45 | *** join/#debian menace (~benutzer0@unaffiliated/menace) |
| 20:14.51 | *** join/#debian gigetoo (~gigetoo@c83-250-32-22.bredband.comhem.se) |
| 20:15.00 | *** join/#debian Cabanossi (~Cabanossi@p57995BB5.dip0.t-ipconnect.de) |
| 20:15.25 | *** part/#debian catfat (~wm@2a04:1980:3100:1aac:e61d:2dff:feb1:48b0) |
| 20:16.58 | *** join/#debian ScreamSupreme (1f33d9af@gateway/web/freenode/ip.31.51.217.175) |
| 20:17.17 | ScreamSupreme | Hi could somebody please help me. I am using Raspbian and have my apt repository set to jessie, however for one package (ddclient), I require a newer version, how can I install only that package from the stretch repository without upgrading all other packages? |
| 20:17.24 | greycat | !raspbian |
| 20:17.24 | dpkg | Raspbian is a distribution <based on Debian> made specifically for the <Raspberry Pi>. Raspbian is not Debian and it is not supported in #debian. Please use #raspbian on irc.freenode.net for support. http://www.raspbian.org/ |
| 20:17.33 | greycat | !frankendebian |
| 20:17.34 | dpkg | When you get random packages from random repositories, mix multiple releases of Debian, or mix Debian and derived distributions, you have a mess. There's no way anyone can support this "distribution of Frankenstein" and #debian certainly doesn't want to even try. See if you can convince ##linux to help. |
| 20:17.58 | ScreamSupreme | greycat: I just need one package to be newer (3.8.3 instead of 3.8.2) |
| 20:18.15 | greycat | *IF* you were running Debian 8, the correct answer would be "Use jessie-backports, or if there isn't a backport of this package, backport it yourself" |
| 20:18.39 | ScreamSupreme | Is there no way to set apt to use stretch instead of jessie for one package? |
| 20:18.43 | greycat | Since you are *NOT* running Debian 8, the correct answer is "ask #raspbian" |
| 20:19.13 | *** join/#debian ltem (~ltem@h081217057026.dyn.cm.kabsi.at) |
| 20:19.57 | *** join/#debian satbyy (satbyy@unaffiliated/satbyy) |
| 20:21.13 | ScreamSupreme | greycat: |
| 20:21.30 | ScreamSupreme | is there no way I can make it use stretch instead of jessie-backports? |
| 20:21.36 | greycat | !dontbreakdebian |
| 20:21.36 | dpkg | rumour has it, dont break debian is https://wiki.debian.org/DontBreakDebian |
| 20:21.37 | *** join/#debian alexertech (~ab@181-161-252-84.baf.movistar.cl) |
| 20:21.37 | *** join/#debian alexertech (~ab@unaffiliated/alexertech) |
| 20:22.18 | *** join/#debian cadeskywalker (~madoka@LFbn-1-12309-246.w90-91.abo.wanadoo.fr) |
| 20:22.22 | ellenium1 | you could install it manually using a .deb and dpkg but as greycat already hinted with the frankendebian reference that's a bad idea generally |
| 20:22.33 | *** join/#debian GJdan (~dan@gateway/vpn/privateinternetaccess/gjdan) |
| 20:22.41 | greycat | I was trying to be a lot stronger than "hinted" :( |
| 20:22.44 | ScreamSupreme | greycat you are actually a knob dude, I didn't ask for you to show me all these "don't mix packages" links, I have told you that I need to update one package and have asked if it is possible to set apt to stretch instead of jessie for one package. |
| 20:22.46 | ellenium1 | haha |
| 20:22.57 | *** mode/#debian [+o greycat] by ChanServ |
| 20:23.04 | jelly | ScreamSupreme, do a local build of newer version |
| 20:23.04 | *** mode/#debian [+b *!*@gateway/web/freenode/ip.31.51.217.175] by greycat |
| 20:23.12 | *** kick/#debian [ScreamSupreme!~wooledg@remote.wooledge.org] by greycat (ScreamSupreme) |
| 20:23.24 | *** mode/#debian [-o greycat] by greycat |
| 20:23.29 | jelly | dpkg, tell screamsupreme about ssb |
| 20:23.35 | *** join/#debian aksn (~Username@144.178.138.252) |
| 20:23.48 | *** join/#debian ledufakademy (~ledufakad@LFbn-1-4826-72.w92-171.abo.wanadoo.fr) |
| 20:24.31 | jelly | ellenium1, and no, in general you may not be able to install it with dpkg easily either |
| 20:24.35 | *** join/#debian shinnya (~shinnya@129.180.210.220.dy.bbexcite.jp) |
| 20:27.36 | *** join/#debian maxxe (~maxxe@unaffiliated/maxxe) |
| 20:27.44 | ellenium1 | would that be because of dependencies, or some other reason? |
| 20:27.58 | mrr0butt | inside debootstraped chroot maybe |
| 20:28.24 | mrr0butt | depends on the pkg |
| 20:29.37 | *** join/#debian jackNemrod (~Thunderbi@217.74.105.4) |
| 20:29.48 | *** join/#debian v01t (~v01t@p4FE44AFB.dip0.t-ipconnect.de) |
| 20:29.53 | *** join/#debian th0r (~Thor@65.131.231.48) |
| 20:31.05 | *** join/#debian Lyberta (~Lyberta@fsf/member/FaTony) |
| 20:31.06 | *** join/#debian mtn (~mtn@unaffiliated/mtn) |
| 20:31.29 | Lyberta | how to change mouse sensitivity? I'm using MATE and GUI app doesn't work |
| 20:32.21 | teraflops | Lyberta: you mean mouse acceleration? |
| 20:33.17 | Lyberta | no, sensitivity, acceleration changes based on the speed of movement, I want the baseline speed of movement |
| 20:33.47 | greycat | You could look at xset. |
| 20:35.00 | teraflops | Lyberta: I still think you mean speed |
| 20:35.23 | teraflops | s/speed/accel |
| 20:35.49 | *** join/#debian mel00010 (~mel00010@99-46-137-113.lightspeed.sntcca.sbcglobal.net) |
| 20:36.33 | Lyberta | teraflops, sensitivity and acceleration are different things, sensitivity doesn't change based on the speed of your movement, it doesn't matter how slow you move, the pointer will always move by the same amount |
| 20:36.41 | *** join/#debian v01t (~v01t@p4FE44AFB.dip0.t-ipconnect.de) |
| 20:38.02 | greycat | well, try "xset m 2 1" and see what happens |
| 20:38.11 | *** join/#debian vadimkolchev (~vadimkolc@217.26.170.95) |
| 20:38.22 | teraflops | Lyberta: mouse sensitivity is a thing? |
| 20:39.13 | *** join/#debian th0r (~th0r@65.131.231.48) |
| 20:39.17 | Lyberta | teraflops, of course, we gamers always completely disable acceleration and everyone of us has their favorite sensitivity |
| 20:39.30 | vadimkolchev | Hi all. Need advice. Is it okay that bug report is unanswered for more than 24 hours? Actually first time filing in Debian, and as far as I understood, my package is maintained by whole group of Debian maintainers, but nobody cares to answer, not sure why. |
| 20:39.49 | *** join/#debian paqcito (be68ec04@gateway/web/freenode/ip.190.104.236.4) |
| 20:40.27 | greycat | I'd say *most* bug reports are not answered quickly.... |
| 20:40.46 | teraflops | xset is for mouse accel, also when I say if it's a thing, I mean a thing that xset/ximput have in their man pages |
| 20:41.03 | vadimkolchev | greycat, okay, just don't know what to expect, that's why ask here |
| 20:41.05 | jelly | vadimkolchev, a week or a month is more realistic expectation of a response |
| 20:41.09 | paqcito | Hi. Im working on a VM on VirtualBox using Ubuntu Server. I'm a new user. I did googled, but with no results. I can't make internet conection work in here. Anyone knows about it? I tried with NAT and Bridge, any change on it. |
| 20:41.23 | vadimkolchev | jelly, thanks, good to know :) |
| 20:41.40 | vadimkolchev | jelly, and fix in next release :) |
| 20:41.58 | jelly | if maintainers are in northern hemisphere, they may be on summer vacation |
| 20:42.10 | greycat | Yesterday was also a major US holiday. |
| 20:42.20 | vadimkolchev | jelly, yes, maybe |
| 20:42.42 | vadimkolchev | greycat, sorry, missed something probably, I'm not from US. Congrats to everyone involved. |
| 20:43.44 | *** join/#debian bpsecret (~bpsecret@unaffiliated/bpsecret) |
| 20:45.34 | *** join/#debian Iridos (~iridos@unaffiliated/iridos) |
| 20:47.42 | *** join/#debian dunderproto (~dunderpro@122-117-44-11.HINET-IP.hinet.net) |
| 20:48.50 | *** join/#debian bpsecret (~bpsecret@unaffiliated/bpsecret) |
| 20:49.36 | *** join/#debian sbine (~sbine@tra78-6-88-186-13-233.fbx.proxad.net) |
| 20:50.12 | Lyberta | alright, this command can change sensitivity: xinput --set-prop 12 141 0.75 0 0 0 0.75 0 0 0 1 |
| 20:50.30 | Lyberta | where last 9 numbers is affine transformation matrix |
| 20:50.56 | borsin | Did an upgrade from Jessie > Stretch. Performed an update > upgrade > dist-upgrade, in that order with Jessie and then again with Stretch. Afterwards I'm having an issue with 3d - I can't get glxgears to run anymore and everything graphical seems slow and sloppy. Thoughts? |
| 20:51.12 | *** join/#debian sbine_ (~sbine@unaffiliated/sbine) |
| 20:51.30 | jhutchins_wk | My record for turn-around on bug reports is about two years for most. |
| 20:51.34 | *** join/#debian fhdrin (~fhdrin@104.168.154.50) |
| 20:51.58 | *** join/#debian sbine_ (~sbine@unaffiliated/sbine) |
| 20:52.01 | *** join/#debian p1x331 (~pixel@2a02:a03f:1298:d900:9585:c25f:b5c7:2447) |
| 20:52.08 | greycat | Record as in fastest, or slowest? |
| 20:52.51 | *** join/#debian josgalo (~josgalo@176.220.77.188.dynamic.jazztel.es) |
| 20:53.06 | *** join/#debian sidetracking (~quassel@99-101-249-43.lightspeed.rcsntx.sbcglobal.net) |
| 20:53.07 | *** join/#debian humbot (~i@unaffiliated/humbag) |
| 20:53.45 | mtn | borsin, video drivers. what card and driver are you running? |
| 20:54.47 | borsin | mtn: it's an intel card in a thinkpad. it suggests it's running on xserver-xorg-intel with i915 |
| 20:55.11 | *** join/#debian remo (~user@d0-138.ltk.com.ua) |
| 20:55.28 | greycat | borsin: (as root) dmesg | grep -i firmware |
| 20:55.52 | jhutchins_wk | greycat: Maybe two out of three right about at two years. That's time to release with a known fix in the initial report, and not entirely Debian. |
| 20:57.17 | borsin | greycat: http://termbin.com/ijvv |
| 20:57.32 | *** join/#debian DrNo (~DrNo@27.124.9.51.dyn.plus.net) |
| 20:57.50 | teraflops | I think modesetting kernel driver is way less buggy than xserver-xorg-intel one |
| 20:57.55 | towo` | borsin, pastebin the whole Xorg.0.log |
| 20:58.00 | greycat | ,file AthrBT_0x11020000.dfu |
| 20:58.04 | judd | Search for AthrBT_0x11020000.dfu in stretch/amd64: firmware-atheros: lib/firmware/ar3k/AthrBT_0x11020000.dfu |
| 20:58.07 | greycat | although that sounds like wireless, not video |
| 20:58.40 | *** join/#debian AimHere (~David@cpc102316-sgyl38-2-0-cust632.18-2.cable.virginm.net) |
| 20:58.56 | borsin | towo`: http://termbin.com/hwx7 |
| 20:59.54 | greycat | ,file dri/i965_dri.so |
| 20:59.54 | *** join/#debian peterbec` (~peterbeci@75-142-96-216.static.mtpk.ca.charter.com) |
| 20:59.58 | judd | Search for dri/i965_dri.so in stretch/amd64: libgl1-mesa-dri: usr/lib/x86_64-linux-gnu/dri/i965_dri.so |
| 21:00.14 | greycat | Try installing that ^^ |
| 21:00.56 | *** join/#debian srg___ (~srg@90.203.255.167) |
| 21:01.40 | borsin | what does the "c" mean in 'aptitude search'? |
| 21:01.57 | greycat | configured? |
| 21:01.58 | *** join/#debian Devastator_y (~Devastato@unaffiliated/devastator) |
| 21:05.16 | *** join/#debian shingouz_ (~doowop@80-186-200-174.elisa-mobile.fi) |
| 21:05.59 | borsin | Think that solved it or helped greatly. Glxgears runs now after installing 'libgl1-mesa-dri'. New Xorg.0.log: http://termbin.com/q0cd |
| 21:06.47 | *** join/#debian sbine_ (~sbine@unaffiliated/sbine) |
| 21:07.50 | *** join/#debian jdipierro (~jdipierro@67.151.160.34) |
| 21:09.00 | *** mode/#debian [+l 1701] by debhelper |
| 21:09.42 | *** join/#debian kzrl (~k@101.164.168.140) |
| 21:10.08 | *** join/#debian p1x331 (~pixel@164.191-244-81.adsl-dyn.isp.belgacom.be) |
| 21:10.42 | *** join/#debian tymczenko (~tymczenko@unaffiliated/tymczenko) |
| 21:11.09 | *** join/#debian sbine_ (~sbine@unaffiliated/sbine) |
| 21:11.59 | *** join/#debian Skaag (sid164385@gateway/web/irccloud.com/x-wadlimnmumbmzgop) |
| 21:12.27 | Skaag | I have an issue with only 4 serial ports being detected instead of the 6 supplied by my motherboard... |
| 21:12.59 | Skaag | I tried adding 8250.n_uarts=6 in grub.cfg, didn't help |
| 21:13.13 | Skaag | tried creating them manually via mknod, still doesn't work |
| 21:13.55 | *** join/#debian vivus (~vivus@unaffiliated/vivus) |
| 21:13.59 | vivus | Hello all |
| 21:14.09 | vivus | what is the .org version of youtube? |
| 21:14.21 | *** join/#debian GJdan (~dan@d75-157-130-131.bchsia.telus.net) |
| 21:16.01 | *** join/#debian th0r (~Thor@65.131.231.48) |
| 21:16.12 | *** join/#debian abu0 (~abu0@user-31-175-133-179.play-internet.pl) |
| 21:19.22 | *** join/#debian anuxivm (~anuxi@92.189.36.210) |
| 21:20.17 | Brigo | Skaag, did you run updage-grub after modif grub.cfg? |
| 21:20.19 | *** join/#debian e14 (~e14@2601:184:487f:ff30:c86b:ebd0:fe43:e5d3) |
| 21:21.50 | *** join/#debian cyborg-one (~cyborg-on@188-115-176-200.broadband.tenet.odessa.ua) |
| 21:22.08 | teraflops | vivus: theres no such thing |
| 21:23.00 | vivus | I should probably look for the person who shared that info with me |
| 21:23.20 | *** join/#debian youngvision__ (~youngvisi@lou27-1-88-162-144-46.fbx.proxad.net) |
| 21:24.10 | Skaag | Brigo: didn't know you need to do that |
| 21:24.33 | *** join/#debian dwb (~dwb@80.80.186.91) |
| 21:24.46 | Skaag | oh wait, yes, we did run upgrade-grub |
| 21:26.07 | teraflops | Skaag: you have to run upgrade-grub if you make changes to /etc/default/grub |
| 21:26.55 | teraflops | if you edit grub.cfg by hand, update-grub does the opposite, and it reverts the changes you made |
| 21:27.52 | *** join/#debian fcch (~Freddy@200.87.148.67) |
| 21:28.36 | *** join/#debian alxy (uid115853@gateway/web/irccloud.com/x-tycbaoeheevlqsny) |
| 21:29.00 | *** mode/#debian [+l 1694] by debhelper |
| 21:29.23 | *** join/#debian enoch85 (~enoch85@109-124-180-118.customer.t3.se) |
| 21:29.23 | *** join/#debian enoch85 (~enoch85@unaffiliated/enoch85) |
| 21:29.38 | *** join/#debian internat (~nf@220-245-56-111.tpgi.com.au) |
| 21:30.07 | *** join/#debian Cabanossi (~Cabanossi@p57995BB5.dip0.t-ipconnect.de) |
| 21:30.42 | *** join/#debian m-H7 (~mathias@adsl-84-226-255-15.adslplus.ch) |
| 21:31.40 | *** join/#debian Esti_Qatzi (~quassel@unaffiliated/esti-qatzi/x-1859420) |
| 21:33.57 | *** join/#debian Drugo (~Drugo@62-11-1-95.dialup.tiscali.it) |
| 21:35.54 | *** join/#debian llucenic_ (~Thunderbi@rev-185-22-215-103.radiolan.sk) |
| 21:37.39 | *** join/#debian crx (~crx@p5DD6D5D6.dip0.t-ipconnect.de) |
| 21:38.12 | *** part/#debian eMaks (~eMaks@unaffiliated/emaks) |
| 21:38.29 | *** join/#debian vadimkolchev (~vadimkolc@217.26.170.95) |
| 21:38.43 | *** join/#debian th0r (~Thor@65.131.231.48) |
| 21:39.11 | vadimkolchev | Just tried to install game, it installed okay into my home folder, so I try to execute starting sh script and it says No such file or directory. What can the problem be? |
| 21:40.13 | *** join/#debian chewchew (92732eca@gateway/web/freenode/ip.146.115.46.202) |
| 21:41.40 | *** join/#debian valcom (~valcom@2a02:a03f:2027:ee00:e4d3:26b6:a8ef:416e) |
| 21:42.11 | *** part/#debian valcom (~valcom@2a02:a03f:2027:ee00:e4d3:26b6:a8ef:416e) |
| 21:42.29 | wpppp | vadimkolchev: ./script.sh (with ./) |
| 21:42.36 | wpppp | not just script.sh because it will look in your PATH instead |
| 21:43.21 | vadimkolchev | wpppp, yes, i am doing it exactly like ./script.sh |
| 21:43.36 | srg___ | try chmod +x script.sh |
| 21:44.03 | wpppp | maybe No such file or directory comes from within that script.... |
| 21:44.07 | vadimkolchev | srg___, already did, permissions are okay and file is executable |
| 21:44.11 | wpppp | maybe No such file or directory comes from within that script.... |
| 21:44.27 | *** join/#debian SmearedBeard (~SmearedBe@unaffiliated/smearedbeard) |
| 21:44.28 | vadimkolchev | wpppp, tried different games, probably miss some libs? |
| 21:45.07 | wpppp | vadimkolchev: you are in that directory? |
| 21:45.12 | wpppp | can you do nano script.sh for example? |
| 21:45.56 | vadimkolchev | wpppp, yes, I am there and can nano this script |
| 21:46.12 | wpppp | how complex is that script file? |
| 21:46.14 | wpppp | how many lines |
| 21:46.16 | *** join/#debian buu (~buu@99-74-60-251.lightspeed.hstntx.sbcglobal.net) |
| 21:46.21 | vadimkolchev | wpppp, it also autocompletes if i Tab, so I am exactly there, I am not very noobish in file navigation) |
| 21:46.33 | buu | Is there any monitoring software in the same console world as htop that displays io and network information as well? |
| 21:46.33 | wpppp | how many lines? |
| 21:46.53 | vadimkolchev | wpppp, I think no more than 30 |
| 21:47.09 | wpppp | vadimkolchev: hm, can you see lines where other files are loaded or called in that script? |
| 21:48.02 | vadimkolchev | wpppp, probably here is something wrong? - CURRENT_DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )" Does this variable look good for you? |
| 21:48.27 | wpppp | https://www.gnu.org/software/bash/manual/html_node/Bash-Variables.html |
| 21:48.30 | wpppp | hmmm |
| 21:48.37 | wpppp | what game is it? |
| 21:48.53 | *** join/#debian na1rb (~nairb@cpe-70-121-109-211.austin.res.rr.com) |
| 21:48.53 | *** join/#debian na1rb (~nairb@unaffiliated/na1rb) |
| 21:49.32 | *** join/#debian kzrl (~k@101.164.168.140) |
| 21:49.49 | Tramp | vadimkolchev: what is the very first line of the script? |
| 21:50.09 | vadimkolchev | Tramp, #!/bin/bash though about it too, but looks okay for me |
| 21:50.11 | *** join/#debian Texou (~Texou@unaffiliated/texou) |
| 21:50.24 | wpppp | lol, the game is to start it - the start-me.sh game :P |
| 21:51.25 | vadimkolchev | wpppp, hmm, i installed i386 libs, now not found problem disappeared |
| 21:51.31 | *** part/#debian vivus (~vivus@unaffiliated/vivus) |
| 21:52.05 | vadimkolchev | wpppp, however game still does not run :) Says Running game and produces no errors |
| 21:52.16 | wpppp | vadimkolchev: you got some desktop environment x window? |
| 21:52.17 | wpppp | hmmmmm |
| 21:52.20 | wpppp | frustrating |
| 21:52.29 | vadimkolchev | wpppp, sure, default gnome-shell installation |
| 21:53.43 | vadimkolchev | wpppp, done it, thanks for trying to help |
| 21:54.03 | *** join/#debian Guest83690 (~renato@bl6-207-41.dsl.telepac.pt) |
| 21:54.20 | *** join/#debian monkwitdafunk (~yaaic@unaffiliated/monkwitdafunk) |
| 21:54.50 | *** join/#debian klone_1979 (~klone@2606:6000:d791:cb00::4) |
| 21:55.16 | *** part/#debian klone_1979 (~klone@2606:6000:d791:cb00::4) |
| 21:56.20 | mrr0butt | hey there was an kernel vulnerability tracker for debian right? |
| 21:56.34 | mrr0butt | and question nr2 |
| 21:57.07 | mrr0butt | why there is no tor repository for debian testing? |
| 21:57.09 | wpppp | vadimkolchev: so it works now? |
| 21:57.22 | *** join/#debian ralpheeee (~ralpheeee@gateway/vpn/privateinternetaccess/ralpheeee) |
| 21:57.25 | mrr0butt | there always used to be one? |
| 21:57.39 | *** join/#debian chachasmooth (~chachasmo@unaffiliated/chachasmooth) |
| 21:57.55 | vadimkolchev | wpppp, yes, think it was libs problem |
| 21:58.02 | wpppp | hm |
| 21:58.09 | wpppp | vadimkolchev: still the starter script could have told you |
| 21:58.10 | vadimkolchev | wpppp, however with no output it was just like - let me install i386 ones |
| 21:58.18 | vadimkolchev | wpppp, it didn't ( |
| 21:58.20 | wpppp | yes, I would even consider this a bug |
| 21:58.56 | vadimkolchev | wpppp, probably, however this is a proprietary thingy and I am not a paying one, so they won't care :) |
| 21:59.17 | wpppp | vadimkolchev: but you could help other vadimkolchevs in future :) |
| 21:59.21 | *** part/#debian ralpheeee (~ralpheeee@gateway/vpn/privateinternetaccess/ralpheeee) |
| 21:59.44 | *** join/#debian valcom (~valcom@2a02:a03f:2027:ee00:e4d3:26b6:a8ef:416e) |
| 21:59.51 | vadimkolchev | wpppp, yes, thinking about writing a book on it :) |
| 22:00.04 | *** join/#debian v01t (~v01t@p4FE44AFB.dip0.t-ipconnect.de) |
| 22:00.43 | *** join/#debian frankie (~frankie@klecker.ba.issia.cnr.it) |
| 22:00.49 | *** part/#debian valcom (~valcom@2a02:a03f:2027:ee00:e4d3:26b6:a8ef:416e) |
| 22:01.25 | *** join/#debian na1rb (~nairb@cpe-70-121-109-211.austin.res.rr.com) |
| 22:01.25 | *** join/#debian na1rb (~nairb@unaffiliated/na1rb) |
| 22:08.09 | *** join/#debian Hyp3ri0n (~OtakuSenp@unaffiliated/otakusenpai) |
| 22:08.44 | *** join/#debian LifeFrame (~smica83@86FF325B.dsl.pool.telekom.hu) |
| 22:09.01 | *** mode/#debian [+l 1685] by debhelper |
| 22:09.13 | *** join/#debian Epakai (~coweater@47.188.49.58) |
| 22:09.59 | *** join/#debian LifeFrame (~smica83@86FF325B.dsl.pool.telekom.hu) |
| 22:10.57 | *** join/#debian wilbert (~wilbert@unaffiliated/wilbert) |
| 22:11.24 | *** join/#debian idmistir_ (~idmistir@2a01:4f8:161:620b::2) |
| 22:12.28 | *** join/#debian idmistir (~idmistir@unaffiliated/idmistir) |
| 22:14.02 | Skaag | teraflops: so upgrade-grub to apply, not update-grub, yes? |
| 22:14.39 | Skaag | we tried this, we still only see ttyS0 to ttyS3. ttyS4 and ttyS5 are missing. |
| 22:15.47 | teraflops | there's no upgrade-grub command |
| 22:16.55 | Iridos | that might make it more difficult ^^ |
| 22:16.55 | *** join/#debian pog (~pogay@80.74.159.110) |
| 22:17.24 | Skaag | so if I change /boot/grub/grub.cfg what's the correct procedure to apply those changes? |
| 22:17.43 | teraflops | nothing |
| 22:18.09 | Skaag | my grub.cfg still contains the uart line: linux/boot/vmlinuz-4.9.0-3-amd64 root=UUID=7498023d-7a2a-4428-85ec-433b0b945b21 ro quiet usbhid.quirks=0xeef:0x1:0x40 8250.n_uarts=6 |
| 22:18.38 | teraflops | what I wrote above I think it's pretty clear |
| 22:19.00 | *** mode/#debian [+l 1679] by debhelper |
| 22:20.15 | Skaag | ok but running update-grub did not remove that parameter from my grub.cfg |
| 22:20.37 | Skaag | because we added it in /etc/default/grub |
| 22:20.58 | teraflops | https://wiki.debian.org/Grub#Configuring_GRUB_v2 |
| 22:22.50 | *** join/#debian fFamousfFatman (~El@2a01:e35:8ad7:6b60:36f8:cdc2:e611:f44a) |
| 22:22.53 | *** join/#debian Ekchuan (~RandyMars@2a02:c7f:610:2f00:4167:358c:d8f5:38b1) |
| 22:23.33 | *** part/#debian dwb (~dwb@80.80.186.91) |
| 22:24.13 | *** join/#debian jimbzy (~jim@69.29.218.224) |
| 22:24.33 | *** join/#debian lounge-user50 (0533e5ad@gateway/web/thelounge/ip.5.51.229.173) |
| 22:25.40 | lounge-user50 | Hello |
| 22:27.10 | Skaag | ok found the issue |
| 22:27.38 | *** join/#debian CrowX-- (~CrowX-@46.217.130.4) |
| 22:27.53 | mrr0butt | Skaag, dont change /boot/grub.cfg |
| 22:28.03 | Skaag | it should be nr_uarts instead of n_uarts |
| 22:28.08 | mrr0butt | edit /etc/default/grub.cfg |
| 22:28.10 | Skaag | no, I changed /etc/default/grub |
| 22:28.11 | mrr0butt | and do |
| 22:28.16 | Skaag | it works now |
| 22:30.19 | *** join/#debian atomi (~atomi@71-83-179-177.dhcp.lnbh.ca.charter.com) |
| 22:30.26 | *** mode/#debian [+o eir] by ChanServ |
| 22:30.27 | *** mode/#debian [-bo *!*@gateway/web/freenode/ip.31.51.217.175 eir] by eir |
| 22:31.01 | *** join/#debian tm4 (~tm4@193.142.159.133) |
| 22:31.01 | *** join/#debian tm4 (~tm4@unaffiliated/tm4) |
| 22:32.41 | *** join/#debian xfile (~xxx@90.254.119.202) |
| 22:33.13 | *** join/#debian tm4 (~tm4@unaffiliated/tm4) |
| 22:33.49 | *** join/#debian bazquxer (~bazquxer@gateway/tor-sasl/bazquxer) |
| 22:33.57 | *** join/#debian Texou (~Texou@unaffiliated/texou) |
| 22:34.33 | *** join/#debian Soul_Eater (~marcelo@200-216-109-232.user.veloxzone.com.br) |
| 22:34.38 | *** join/#debian Soul_Eater (~marcelo@unaffiliated/soul-eater/x-4649632) |
| 22:35.01 | TheWild | Tazmain: how is that? I can read files fine from the root without ntfs-3g, but I don't know how to make the mounted volume accessible to another user. |
| 22:36.54 | *** join/#debian numjer (~numjer@gateway/tor-sasl/numjer) |
| 22:37.38 | TheWild | how the hell I just typed here? Damn webchat. |
| 22:38.34 | *** join/#debian Murda_ (~Murda@cpc88596-newt36-2-0-cust988.19-3.cable.virginm.net) |
| 22:39.15 | *** join/#debian TheCoffeMaker (~TheCoffeM@unaffiliated/thecoffemaker) |
| 22:39.38 | *** join/#debian Delta-One (~zero@2001:2002:51e2:7ba1:6391:acc7:b55f:c617) |
| 22:40.19 | *** join/#debian ski7777 (~quassel@ip5b439bd3.dynamic.kabel-deutschland.de) |
| 22:41.26 | *** join/#debian BWMerlin (~Thunderbi@cpe-213-160-232-103.wireline.com.au) |
| 22:45.24 | *** join/#debian na1rb (~nairb@unaffiliated/na1rb) |
| 22:46.23 | *** join/#debian yokisuci (~yokisuci@c83-255-29-229.bredband.comhem.se) |
| 22:47.35 | *** join/#debian hanasaki (~hanasaki@pool-71-175-16-147.phlapa.fios.verizon.net) |
| 22:47.38 | *** join/#debian diniwed (~gavron@ool-457f31af.dyn.optonline.net) |
| 22:49.07 | hanasaki | firefox esr in a new install of deb 9 plays netflix fine with drm. in an existing system that was upgraded from debian 8, netflix says "problem occured...." nothing useful in the output. also tried with a new profile from scratch. thoughts on debugging? |
| 22:50.05 | *** join/#debian Ryokooo (~gon@din-213-169-231-77.ipcom.comunitel.net) |
| 22:50.33 | Ryokooo | Hola a tod@s |
| 22:50.39 | Ryokooo | <PROTECTED> |
| 22:52.06 | Ryokooo | <PROTECTED> |
| 22:52.17 | Ryokooo | Solo instalado y configurado con DVD,s oficiales Debian 9, MD5Dum, etc. |
| 22:52.33 | *** join/#debian yokisuci (~yokisuci@c83-255-29-229.bredband.comhem.se) |
| 22:54.08 | *** join/#debian gigetoo (~gigetoo@c83-250-32-22.bredband.comhem.se) |
| 22:54.12 | *** join/#debian knidos (~knidos@85.100.166.140) |
| 22:56.32 | *** join/#debian ward3n (~ward3n@2001:2012:122a:a400:1951:7c25:f820:e04a) |
| 22:56.48 | *** join/#debian woyzeck_ (~woyzeck@177.34.142.183) |
| 22:56.50 | *** join/#debian ward3n (~ward3n@unaffiliated/doc404) |
| 22:57.26 | *** join/#debian ski7777 (~quassel@95.88.73.52) |
| 22:57.40 | *** join/#debian si13nt (~si13nt@cpe-184-58-218-149.wi.res.rr.com) |
| 22:57.42 | *** join/#debian DeaDSouL (~DeaDSouL@37.231.210.189) |
| 22:57.47 | *** part/#debian si13nt (~si13nt@cpe-184-58-218-149.wi.res.rr.com) |
| 22:58.09 | *** join/#debian Brigo (~Brigo@43.10.60.178.dynamic.reverse-mundo-r.com) |
| 22:58.41 | *** join/#debian kmilogars (~kmilogars@dynamic-186-154-33-64.dynamic.etb.net.co) |
| 22:59.21 | *** join/#debian L3gacy (~L3gacy@2601:8d:502:4345:1dcc:6661:21e2:88a) |
| 22:59.49 | *** join/#debian sidetracking (~quassel@99-101-249-43.lightspeed.rcsntx.sbcglobal.net) |
| 23:00.47 | *** join/#debian peterbec` (~peterbeci@75-142-96-216.static.mtpk.ca.charter.com) |
| 23:00.52 | *** join/#debian neurot (~neurot@gateway/vpn/privateinternetaccess/neurot) |
| 23:00.52 | *** join/#debian bemawi (~bemawi@2a01:e0a:b:b040:feaa:14ff:fe28:741a) |
| 23:07.41 | *** join/#debian Namarrgon (~glei@archlinux/op/namarrgon) |
| 23:07.53 | *** join/#debian yokisuci (~yokisuci@c83-255-29-229.bredband.comhem.se) |
| 23:08.53 | Ryokooo | <PROTECTED> |
| 23:09.10 | *** join/#debian Bercik (~Yotsuba@unaffiliated/bercik) |
| 23:09.29 | *** join/#debian kongkong (~atomic@221.192.179.41) |
| 23:09.44 | *** join/#debian malademental (~emixam@LFbn-1-7635-69.w90-126.abo.wanadoo.fr) |
| 23:10.25 | Tramp | !es |
| 23:10.25 | dpkg | Este canal es de soporte técnico en Inglés para Debian. Si prefiere que el soporte sea en Español, puede ingresar en #debian-es tecleando /join #debian-es en la lÃnea de chat. |
| 23:11.19 | *** join/#debian v01t (~v01t@p4FE44AFB.dip0.t-ipconnect.de) |
| 23:11.56 | Ryokooo | Thanks |
| 23:14.23 | *** join/#debian lesik (~lesik@141.2.20.2) |
| 23:14.53 | *** join/#debian Gazooo (~Gazooo@72-238-64-134.res.bhn.net) |
| 23:15.24 | tharkun | Aloha, how do I install the ssb module? |
| 23:15.32 | tharkun | http://kmuto.jp/debian/hcl/index.rhtmlx?check=1&lspci=14e4:4315 |
| 23:15.59 | *** join/#debian thunderrd (~thunderrd@159.192.251.44) |
| 23:16.52 | *** join/#debian na1rb (~nairb@unaffiliated/na1rb) |
| 23:18.39 | *** join/#debian Brigo (~Brigo@43.10.60.178.dynamic.reverse-mundo-r.com) |
| 23:19.00 | *** mode/#debian [+l 1665] by debhelper |
| 23:19.18 | *** join/#debian davimore (~davimore@185.143.230.224) |
| 23:19.38 | *** join/#debian Noturno (~marcelo@179-197-167-80.user.veloxzone.com.br) |
| 23:21.00 | *** join/#debian afuentes (~kusanagi@201.165.35.37.dynamic.jazztel.es) |
| 23:22.02 | *** join/#debian sielicki (~sielicki@unaffiliated/n1cky) |
| 23:22.19 | *** join/#debian DeaDSouL (~DeaDSouL@37.231.210.189) |
| 23:22.41 | sielicki | Is there a name for the debian system installer software? |
| 23:24.19 | *** join/#debian Ricardo__ (~rick@unaffiliated/ricardo--/x-7903455) |
| 23:24.27 | *** join/#debian CrowX-- (~CrowX-@79.141.115.88) |
| 23:24.41 | *** join/#debian jandrusk (~jra@cpe-104-231-119-61.neo.res.rr.com) |
| 23:24.44 | *** join/#debian gonegirl (~gonegirl@S0106bcd1652f1058.cg.shawcable.net) |
| 23:25.54 | Tramp | sielicki: To my knowledge, it's always called "Debian installer" |
| 23:26.44 | *** join/#debian dvs (~hibbard@cwv.teksavvy.com) |
| 23:27.18 | sielicki | Gotcha. I know fedora calls theirs Anaconda, and there exists another called calamares that is used by some arch linux derivatives. I think suse works off their whole yast framework. |
| 23:27.57 | wpppp | sielicki: suse dumps yast? :O |
| 23:28.32 | sielicki | dumps? What do you mean? |
| 23:28.59 | wpppp | I mean, it stops supporting it? |
| 23:29.44 | sielicki | No, I think you misunderstand me, I didn't mean anything like that. |
| 23:29.51 | *** join/#debian Mitt (~timo@MEN-AI2-140-086.wcta.net) |
| 23:29.57 | sielicki | The suse installer is heavily based on YAST, is what I meant. |
| 23:31.02 | wpppp | ah ok :) |
| 23:32.24 | *** join/#debian yokisuci (~yokisuci@c83-255-29-229.bredband.comhem.se) |
| 23:36.01 | *** join/#debian th0r (~Thor@65.131.231.48) |
| 23:38.55 | *** join/#debian Tonkadoro (~tony@2602:306:8bb9:2830:219:b9ff:fe3e:5dba) |
| 23:39.46 | *** join/#debian Tonkadoro (~tony@2602:306:8bb9:2830:219:b9ff:fe3e:5dba) |
| 23:42.09 | *** join/#debian nvz (~user@unaffiliated/jscoder) |
| 23:44.27 | *** join/#debian kingsley (~kingsley@97-113-20-78.tukw.qwest.net) |
| 23:44.54 | *** join/#debian Cabanossi (~Cabanossi@p57995BB5.dip0.t-ipconnect.de) |
| 23:49.00 | *** mode/#debian [+l 1657] by debhelper |
| 23:49.46 | *** join/#debian cereal_poster (~Cereal@177.96.111.35) |
| 23:49.53 | *** join/#debian vvande (~vvande@167.88.112.90) |
| 23:51.34 | *** join/#debian codebam- (codebam@gateway/shell/panicbnc/x-apacsxbvivgfqzfp) |
| 23:51.47 | *** join/#debian yokisuci (~yokisuci@c83-255-29-229.bredband.comhem.se) |
| 23:51.49 | *** join/#debian littlebear (~littlebea@CPEa84e3fc91293-CMa84e3fc91290.cpe.net.cable.rogers.com) |
| 23:51.49 | *** join/#debian in1t3r_ (~in1t3r@unaffiliated/lordshiva) |
| 23:53.26 | *** join/#debian sidetracking (~quassel@99-101-249-43.lightspeed.rcsntx.sbcglobal.net) |
| 23:54.08 | *** join/#debian rkta_ (~kt@p5DE8647F.dip0.t-ipconnect.de) |
| 23:55.29 | *** join/#debian elninja44 (~arrr@c-73-36-111-215.hsd1.in.comcast.net) |
