| 00:21.17 | *** join/#debianppc Mestapheles (~Mestaphel@d142-179-128-213.abhsia.telus.net) |
| 00:34.42 | *** join/#debianppc penghb (~penghb@202.108.130.164) |
| 00:48.36 | Mestapheles | hey does xconfig work on and updated and upgraded sarge release? I installed libqt3-dev package as well made sure gcc, gnu make, binutils, util-linux, module-init-tools, procps, and e2fsprogs were installed and up to date. |
| 00:49.02 | simonrvn | xconfig is a POS. use menuconfig |
| 00:49.28 | Mestapheles | k |
| 00:49.59 | simonrvn | all you need (other than gcc and such) is libncurses5-dev |
| 01:00.56 | shadows | simonrvn, any idea why i can assign a NIC an IP address on my nubus pmac but i can't reach the rest of the network? |
| 01:06.38 | *** join/#debianppc [MA]MTM84|X| (~mtm84@ca-fulrtn-cuda1e-76.lmdaca.adelphia.net) |
| 01:17.59 | simonrvn | check your routing table(s) and networks. more info would help ;) |
| 01:26.02 | *** join/#debianppc peterrooney (~peterroon@S01060040052f6d20.gv.shawcable.net) |
| 01:26.31 | *** part/#debianppc peterrooney (~peterroon@S01060040052f6d20.gv.shawcable.net) |
| 01:28.27 | *** join/#debianppc muffinpeddler (~root@adsl-69-211-79-95.dsl.milwwi.ameritech.net) |
| 01:28.27 | *** mode/#debianppc [+b *!~root@*] by ChanServ |
| 01:28.27 | *** part/#debianppc muffinpeddler (~root@adsl-69-211-79-95.dsl.milwwi.ameritech.net) |
| 01:32.30 | *** join/#debianppc muffinpeddler (~max@adsl-69-211-79-95.dsl.milwwi.ameritech.net) |
| 01:33.19 | muffinpeddler | pahartik: I am going to compile a new kernel (again) so do you recommend I not include initial ramdisk support? And what about the ATA support? |
| 01:34.46 | muffinpeddler | actually I should have addressed that to anyone, he had just been helping me |
| 01:35.22 | *** part/#debianppc muffinpeddler (~max@adsl-69-211-79-95.dsl.milwwi.ameritech.net) |
| 01:35.29 | *** join/#debianppc muffinpeddler (~max@adsl-69-211-79-95.dsl.milwwi.ameritech.net) |
| 01:37.20 | simonrvn | muffinpeddler: on or off doesn't matter, but i'm experimenting with bootx, and it seems to not like kernels with initrd and ramdisk support without an initrd. but i'm still checking it out |
| 01:37.22 | pahartik | muffinpeddler: it is easier if you build everything needed for boot-up as built-in drivers and not as modules |
| 01:38.50 | muffinpeddler | alright |
| 01:39.01 | muffinpeddler | because I built both a 2.4.27 and a 2.6.8 |
| 01:39.21 | muffinpeddler | and the former booted, but my keyboard layout seemed messed up, so I went to try the 2.6.8 |
| 01:39.34 | muffinpeddler | and it wouldn't get past the openfirmware message screen |
| 01:39.55 | muffinpeddler | so I think I shouldn't include the open firmware message support option I remember adding |
| 01:40.17 | simonrvn | um, no you *want* that |
| 01:43.51 | *** join/#debianppc blackblob (~blackblob@sebounet.net2.nerim.net) |
| 01:47.44 | muffinpeddler | alright |
| 01:48.01 | muffinpeddler | do you have any idea why it would freeze on the open firmware messages? |
| 01:50.30 | simonrvn | something is making lock up. it surely isn't locking up on the messages themselves |
| 01:51.55 | muffinpeddler | should I enable ADB? |
| 01:52.25 | simonrvn | what machine is this again? |
| 01:52.26 | muffinpeddler | or maybe I should be asking if there is anything that I SHOULDN'T be adding |
| 01:52.29 | muffinpeddler | powermac g3 |
| 01:52.32 | muffinpeddler | blue and white |
| 01:52.40 | simonrvn | yes |
| 01:56.35 | simonrvn | muffinpeddler: better yet, paste what lspci says in #flood, and dcc me your config or put it up somewhere i can see it |
| 01:58.13 | muffinpeddler | after I finish this config? |
| 01:58.27 | simonrvn | yes |
| 01:58.32 | muffinpeddler | Because I deleted the kernel image I had made to get a fresh start |
| 01:58.36 | muffinpeddler | alright |
| 02:00.39 | simonrvn | you need ip_conntrack_irc |
| 02:00.46 | muffinpeddler | me? |
| 02:00.47 | simonrvn | (02:00) DCC can't connect to 192.168.2.31 port 1285 |
| 02:01.00 | muffinpeddler | hmm |
| 02:01.49 | muffinpeddler | I am going to post in flood right now |
| 02:01.57 | simonrvn | do you have some www host you can put it on? |
| 02:02.22 | muffinpeddler | sure |
| 02:02.26 | muffinpeddler | hold on |
| 02:06.36 | *** join/#debianppc gadek (~gadek@80.28.internet.uqam.ca) |
| 02:07.24 | muffinpeddler | simonrvn: http://muffinpeddler.com/linux/.config |
| 02:07.50 | simonrvn | cool |
| 02:08.15 | muffinpeddler | :) |
| 02:08.35 | muffinpeddler | I will be right back, so if you have any suggestions, I will come back later and see them |
| 02:08.46 | muffinpeddler | thanks, and I posted lspci in flood for ya |
| 02:11.24 | simonrvn | yup, saw that, thanks |
| 02:13.03 | simonrvn | muffinpeddler: why build altivec on a g3? |
| 02:14.25 | *** join/#debianppc michael__ (~sadjester@d60-65-124-214.col.wideopenwest.com) |
| 02:20.35 | simonrvn | muffinpeddler: enable TAU, and maybe the averaging, but not the other option; disable RAMDISK; it doesn't have an ata-100 bus on that thing, disable; the AIC reset delay doesn't have to be so large, you can set it to 6000 or more, but 15000 is too long (15 sec) and the commands it can take up to 253, better set it much lower, like 32-64; you have pcilynx firewire but you didn't enable it; you should maybe enable pmu and cuda both, i don't know what a ... |
| 02:20.41 | simonrvn | ... B&W g3 has; might want to enable appletalk if you have other macs on the lan; |
| 02:22.27 | simonrvn | muffinpeddler: why netradio? i don't see a card for such a thing in lspci; if you're going to enable ppp, i suggest enabling the other stuff - and why SLIP? do you need that?; no need for CONFIG_INPUT_MOUSEDEV_PSAUX=y either; |
| 02:25.17 | simonrvn | muffinpeddler: the serial stuff is for x86, disable, and enable the powermac serial stuff if you have serial ports; do you need ps/2 stuff at all?; enable GEN_RTC, you need it; over-configuring the video, cut out what you don't have; enable framebuffer console, you *have* to have it on powermacs; |
| 02:27.34 | simonrvn | muffinpeddler: modularise the sound drivers, enable alsa and alsa's OSS emulation you're going to get conflicts otherwise with both as =y; i'm not sure which host controller opti is but i think it's uhci or ohci; |
| 02:29.31 | simonrvn | muffinpeddler: might as well enable tmpfs, it's useful, same for hfsplus ; you should modularise your kernel more, that's a waste and makes your kernel too big; enable bootx_text; |
| 02:32.00 | *** join/#debianppc blackblo1 (~blackblob@sebounet.net2.nerim.net) |
| 02:32.52 | *** join/#debianppc sfire||mouse (~cwevans@uv5a-230.resnet.csupomona.edu) |
| 02:35.50 | *** join/#debianppc sk1p_ (alex@pD958C8A6.dip.t-dialin.net) |
| 02:44.53 | muffinpeddler | thanks I am going to look into this...unfortunately I had chosen this config too quickly with things not chosen before, but you are helping a lot anyways |
| 02:46.31 | muffinpeddler | so I don't have to enable much in the way of ata support? |
| 02:46.42 | simonrvn | not ata-100 anyway |
| 02:47.00 | simonrvn | unless you have a card that isn't seen in lspci (i.e., not installed) |