| 00:27.27 | *** join/#edev joe_bleau (n=joe_blea@adsl-65-67-67-230.dsl.fyvlar.swbell.net) |
| 01:01.06 | *** join/#edev joe_bleau (n=joe_blea@adsl-67-66-233-171.dsl.fyvlar.swbell.net) |
| 04:31.41 | jbevren_ | yawn |
| 04:41.22 | *** join/#edev catastrop (n=catastr0@d14-69-178-65.try.wideopenwest.com) |
| 06:29.26 | jbevren_ | jbevren@ganymede:~$ echo `id` |
| 06:29.26 | jbevren_ | uid=1000(jbevren) gid=1000(jbevren) groups=20(dialout),24(cdrom),25(floppy),29(audio),40(src),44(video),46(plugdev),1000(jbevren) |
| 06:29.28 | jbevren_ | gah |
| 06:29.32 | jbevren_ | I hate Xming |
| 06:29.39 | jbevren_ | http://www.bgmicro.com/prodinfo.asp?prodid=COM1191 |
| 06:29.50 | jbevren_ | pc100 dimm |
| 06:29.55 | jbevren_ | pci, ppc 403ga |
| 06:30.07 | jbevren_ | bgmicro claims their techs have booted linux on it |
| 12:06.45 | *** join/#edev Genesis (n=genesis@dev.aimao.org) |
| 12:08.20 | Genesis | bonjour |
| 13:04.22 | *** join/#edev prpplague (n=billybob@72.22.141.137) |
| 13:06.48 | *** mode/#edev [+o prpplague] by ChanServ |
| 13:57.10 | *** join/#edev GPSFan (n=Ken@65.121.49.208) |
| 14:00.03 | prpplague | http://www.surpluscomputers.com/store/main.aspx?p=ItemDetail&item=ACC10692 |
| 14:00.15 | prpplague | man i can't believe the price on that |
| 14:00.23 | prpplague | its basically a ps2 keyboard port to rs-232 |
| 14:06.00 | jbevren_ | oh? |
| 14:06.11 | jbevren_ | prpplague: http://www.bgmicro.com/prodinfo.asp?prodid=COM1191 |
| 14:07.11 | prpplague | jbevren_: cute |
| 14:07.17 | prpplague | i've not done much with ppc |
| 14:07.38 | prpplague | jbevren_: wish that had a better pic of the board |
| 14:07.54 | jbevren_ | prpplague: Indeed. |
| 14:07.57 | jbevren_ | I ordered a couple no less |
| 14:08.14 | jbevren_ | they claim linux will boot, it has ide, eth, serial, and comes with a firewire card in one of the pci slots |
| 14:08.56 | jbevren_ | at any rate, the c64 crowd has used the palm -> ethernet gadgets to get the c64 on ethernet :) |
| 14:09.23 | jbevren_ | prpplague: so its pretty simple to adapt these to rs232 eh? |
| 14:09.31 | jbevren_ | I'm not familiar with the palm's extension prot |
| 14:09.33 | jbevren_ | port... |
| 14:09.47 | prpplague | jbevren_: the extension port is just a rs-232 |
| 14:10.00 | jbevren_ | even with correct voltages eh? |
| 14:10.03 | prpplague | yea |
| 14:10.14 | prpplague | jbevren_: you purchased from bgmirco before? |
| 14:10.30 | jbevren_ | yeah |
| 14:10.36 | jbevren_ | I did before I was on the internet lol |
| 14:10.41 | jbevren_ | I used to get their paper catalog |
| 14:11.09 | jbevren_ | I dont know how they are these days, but theyre trustable imho |
| 14:11.14 | jbevren_ | I dunno about international shipping tho |
| 14:11.59 | prpplague | i've never purchased from them |
| 14:12.09 | jbevren_ | nod |
| 14:12.16 | prpplague | jbevren_: i usually get stuff shipped to the states and then to me |
| 14:12.16 | jbevren_ | that was when I was in high school |
| 14:12.21 | jbevren_ | so dad ordered for me heh |
| 14:12.28 | jbevren_ | prpplague: ah, you have a proxy shipper? :) |
| 14:12.51 | prpplague | jbevren_: hehe, i'll tell my brother that is his new title |
| 14:16.53 | jbevren_ | hmm |
| 14:16.59 | jbevren_ | give dosemu direct access to its ports? :) |
| 14:17.19 | prpplague | jbevren_: i was thinking about a native client |
| 14:17.25 | jbevren_ | heh |
| 14:17.35 | jbevren_ | well, if you do that, you can watch how dosemu hits the card ;-) |
| 14:17.43 | jbevren_ | it's probably not that complex |
| 14:17.45 | jbevren_ | ohh is paraport |
| 14:17.50 | prpplague | yea thats what i was thinking |
| 14:18.00 | prpplague | probably just some basic bit banging |
| 14:18.10 | jbevren_ | or word-banging but yeah |
| 14:18.28 | jbevren_ | just a device with storage ram and a few registers |
| 14:18.33 | jbevren_ | dang I wish I'd have seen that :) |
| 14:21.14 | prpplague | yea |
| 14:21.20 | prpplague | probably |
| 14:24.58 | prpplague | hehe halted.com has the weller 12 watt pencil http://www.halted.com/commerce/ccp14771-12-watts--120v-pencil-thin-soldering-iron-wm120-wel073.htm |
| 14:25.04 | jbevren_ | could put a logic analyzer on the parallel port (chuckle) |
| 14:25.17 | jbevren_ | Ive had probs with <20w irons |
| 14:25.29 | jbevren_ | being unable to melt solder on device legs :X |
| 14:26.01 | prpplague | jbevren_: really? i love my 12watt iron |
| 14:26.08 | prpplague | jbevren_: perfect for micro hacks |
| 14:26.14 | jbevren_ | Ive lifted more pads with a 12w than with my 30w ;-) |
| 14:26.22 | jbevren_ | although, I bet application would be ok |
| 14:26.34 | prpplague | jbevren_: interesting |
| 14:26.49 | jbevren_ | I end up lifting the pad cause it takes so long to melth through-hole |
| 14:26.56 | jbevren_ | <PROTECTED> |
| 14:27.03 | prpplague | jbevren_: ohhh, you are doing through hole |
| 14:27.15 | prpplague | jbevren_: yea for through whole i usually use a 15 or 20watt |
| 14:27.21 | jbevren_ | I'm good at soldering, but selecting an appropriate iron I could use improvement on :) |
| 14:27.26 | prpplague | jbevren_: 12watt is for smd |
| 14:27.31 | jbevren_ | I see |
| 14:31.29 | jbevren_ | ebay 6781687714 |
| 14:31.31 | jbevren_ | aint it cute |
| 14:32.27 | prpplague | hehe yea |
| 14:32.36 | prpplague | funny the lnode80 is probably about the same size |
| 14:39.16 | *** join/#edev ShortWave (n=shortwav@67.151.73.146) |
| 14:39.16 | *** mode/#edev [+o ShortWave] by ChanServ |
| 14:42.55 | jbevren_ | woo |
| 14:42.59 | jbevren_ | gp2x is here :) |
| 14:43.59 | prpplague | jbevren_: cool |
| 14:47.59 | *** join/#edev samrobb_ (n=samrobb_@65-117-135-105.dia.cust.qwest.net) |
| 14:48.14 | jbevren_ | and of course, usb-storage freezes on load |
| 14:48.20 | jbevren_ | I'm really beginning to hate linux |
| 14:48.24 | jbevren_ | crap software :) |
| 14:48.41 | jbevren_ | sda: assuming drive cache: write through |
| 14:48.41 | jbevren_ | <PROTECTED> |
| 14:48.44 | jbevren_ | (dead) |
| 14:53.45 | jbevren_ | it'd be less disappointing if it werent the linux usb gadget driver that failed to work with linux :P |
| 14:54.54 | prpplague | jbevren_: blasphemer!! |
| 14:55.13 | jbevren_ | :) |
| 15:06.25 | jbevren_ | useless POS |
| 15:06.47 | jbevren_ | doesnt work with linux |
| 15:06.48 | prpplague | jbevren_: didn't know did Point-Of-Sale devices |
| 15:06.51 | jbevren_ | doesnt work with win2k |
| 15:06.56 | jbevren_ | doesnt work with winxp |
| 15:07.01 | jbevren_ | I have no idea what I'm supposed to do with it :P |
| 15:07.59 | jbevren_ | and my only SD reader that's not in the gp2x is wherever The Powers That Be decided to put my camera |
| 15:08.21 | jbevren_ | why do I bother? |
| 15:08.30 | prpplague | hehe |
| 15:08.50 | prpplague | jbevren_: this is the gp2x that you are trying to get working? |
| 15:09.53 | jbevren_ | yeah |
| 15:10.06 | prpplague | ahh |
| 15:10.07 | jbevren_ | the device itself works, but no block device driver in this residence can use it |
| 16:40.44 | *** join/#edev GPSFan (n=Ken@65.121.49.208) |
| 18:44.37 | *** join/#edev samrobb_ (n=samrobb_@65-117-135-105.dia.cust.qwest.net) |
| 22:14.58 | sunrunner20 | loll |
| 22:15.04 | sunrunner20 | my school collects cellphones |
| 22:15.09 | sunrunner20 | had a pretty good one |
| 22:15.11 | sunrunner20 | i took it |
| 22:15.21 | sunrunner20 | and paid them more than the place that they are collecting for does |
| 22:22.36 | jbevren_ | heh |
| 23:15.06 | sunrunner20 | need to figue out who makes moterola's lcd screens |
| 23:15.09 | sunrunner20 | maby moterola... |