| 00:07.48 | agaffney | chances are that unless someone else has already got something working with that mp3 player, you won't be able to |
| 00:08.52 | Eulex | yeah, beginning to realize that |
| 00:20.52 | *** join/#edev joe_bleau (n=joe_blea@ppp-69-154-118-239.dsl.fyvlar.swbell.net) |
| 00:42.07 | *** join/#edev EvilDevil (n=evildevi@p54A6FDDC.dip.t-dialin.net) |
| 01:16.36 | *** join/#edev joe_bleau (n=joe_blea@adsl-208-191-55-115.dsl.fyvlar.swbell.net) |
| 02:20.07 | *** join/#edev p-crat (n=p-crat@lns-bzn-41-82-64-218-21.adsl.proxad.net) |
| 03:08.12 | agaffney | mmm...now to test out alsa and my ens1371 with mpg321 :) |
| 03:35.36 | *** join/#edev catastrop (n=catastr0@d14-69-178-65.try.wideopenwest.com) |
| 03:47.13 | agaffney | hurray for ntpdate |
| 03:58.38 | joe_bleau | Wow. The uart on the MPC850 isn't an easy beast to config. |
| 04:34.08 | *** join/#edev redblue (i=star@ppp048.108-253-207.mtl.mt.videotron.ca) |
| 04:38.28 | WillyLaptop | Anyone know if uboot work ok on a x86, their ReadMe says it work on x86, but specify only one board. Mine is a mz104 from tri-m. |
| 06:15.15 | *** part/#edev joe_bleau (n=joe_blea@adsl-208-191-55-115.dsl.fyvlar.swbell.net) |
| 09:25.01 | *** join/#edev WillyLaptop (n=ofred562@modemcable060.96-203-24.mc.videotron.ca) |
| 10:00.31 | *** join/#edev Jacmet (n=jacmet@50C59F0E.flatrate.dk) |
| 12:30.48 | *** join/#edev prpplague (n=billybob@72.22.131.136) |
| 12:34.50 | *** mode/#edev [+o prpplague] by ChanServ |
| 12:35.21 | prpplague | everything quite lately since fishhead was banned? |
| 12:46.58 | agaffney | pretty much |
| 12:47.12 | agaffney | a lot more signal and a lot less noise :P |
| 12:49.51 | prpplague | hehe |
| 12:50.44 | agaffney | wait source ready timeout 0xffd0 [0x870000] |
| 12:50.45 | agaffney | wait source ready timeout 0xffd0 [0xe3873800] |
| 12:50.47 | agaffney | hmm |
| 12:50.55 | agaffney | my dmesg on the walnut is full of those |
| 12:52.46 | agaffney | appears to be audio-related |
| 12:54.08 | agaffney | hmm, yep...it comes from the ens137[01] driver |
| 12:59.57 | agaffney | can't really find anything that says what it means, though |
| 13:00.39 | prpplague | time to grep the source |
| 13:01.10 | agaffney | I see where it is in the source, but it doesn't help me :P |
| 13:02.36 | agaffney | r = inl(ES_REG(ensoniq, 1371_SMPRATE)); |
| 13:02.36 | agaffney | if ((r & ES_1371_SRC_RAM_BUSY) == 0) |
| 13:02.37 | agaffney | return r; |
| 13:02.42 | agaffney | all greek to me |
| 13:02.58 | agaffney | that's in a loop that checks so many times |
| 13:03.10 | agaffney | after the loop, there's the line that prints the error |
| 13:03.25 | agaffney | the function is called snd_es1371_wait_src_ready() |
| 13:05.04 | ohsix | http://www.ti.com/corp/docs/landing/ez430tool/index.htm?DCMP=430Day&HQS=Other+OT+ez430 tasty |
| 13:42.16 | prpplague | hehe tomorrow is a big day for sco |
| 13:42.25 | prpplague | and their stock just keeps going up |
| 13:58.07 | agaffney | wtf would people invest in sco? |
| 13:58.55 | ohsix | money |
| 13:59.12 | ohsix | if they pull it off, they'll retroactively be able to sue their way to billionaires |
| 13:59.22 | agaffney | but doesn't sco actually have to make some money for investors to make money? |
| 13:59.25 | jbevren | anyone knows that litigation is a sure-fire way to make fast money |
| 13:59.36 | agaffney | well, it's not working so well for sco |
| 13:59.43 | ohsix | sco hasn't made money off anything but litigation for ages |
| 13:59.52 | agaffney | how long has this thing been going on? 2 or 3 years? |
| 14:00.10 | agaffney | how are they making money? they haven't won anything yet |
| 14:00.36 | ohsix | they've collected protection money from some companies |
| 14:00.40 | ohsix | literally |
| 14:00.45 | jbevren | like ev1 |
| 14:01.54 | ohsix | "We might have a case, and we might sue, it will be expensive, moreso if you lose out", is mighty compelling when you can buy out early |
| 14:02.09 | jbevren | odds are better than vegas? |
| 14:02.22 | ohsix | well, they're still in business :P |
| 14:03.46 | ohsix | same reason most internet dweebs buckle when they get a c&d, even without merit |
| 14:04.34 | jbevren | that's because their ISP's say conform or go offline |
| 14:04.38 | ohsix | the RIAA/MPAA is doing the same thing to octegenarians |
| 14:05.01 | ohsix | ya even if the threat is baseless, if it looks official, its like 99% effective |
| 14:06.59 | ohsix | correspondence to abuse@* is a laugh riot |
| 14:07.24 | ohsix | the aformentioned sound to noise ratio is extremely low |
| 14:32.33 | agaffney | I have never gotten a response to a complaint sent to an abuse@* |
| 14:36.18 | prpplague | http://www.saelig.com/miva/merchant.mvc?Screen=PROD&Product_Code=SMD010&Category_Code=SMD |
| 14:37.16 | prpplague | totally execited about the pixter-mm dev board |
| 14:38.00 | jbevren | so I hear heh |
| 14:38.17 | jbevren | so, what sdrams do you plan to use? |
| 14:40.42 | prpplague | micron |
| 14:40.56 | prpplague | jbevren: thats what we use with all of our stuff so i have lots handy |
| 14:41.58 | jbevren | ah |
| 14:42.10 | jbevren | got a part number while I'm prepping an order for digikey? :P |
| 14:43.39 | prpplague | MT48LC16M16A2-75 |
| 14:44.45 | prpplague | for sdram |
| 14:44.46 | prpplague | and |
| 14:44.54 | prpplague | TE28F320 for the flash |
| 14:45.10 | prpplague | you could go with a TE28F640 |
| 14:47.27 | jbevren | 8Mx16 right? |
| 14:47.31 | jbevren | (sdram) |
| 14:49.37 | jbevren | . o O ( mcfly? ) |
| 14:49.39 | jbevren | hehe |
| 14:52.32 | prpplague | 256Mb device |
| 14:52.44 | prpplague | so if you divide that by 8 you get 32MB |
| 14:52.58 | prpplague | two of those together make 64MB ram |
| 14:54.11 | prpplague | really over kill |
| 14:54.23 | prpplague | probably would do better going with the 8M16 |
| 14:55.46 | jbevren | heh |
| 14:56.02 | jbevren | so 16-wide. I figured so,since the current rams are 16-wide |
| 14:56.13 | prpplague | right |
| 14:56.26 | prpplague | well we are assuming that they are 16-wide |
| 14:56.37 | prpplague | its possible that they maybe 32-bit but i doubt ti |
| 14:56.42 | jbevren | the part number indicates 16 wide? |
| 14:56.48 | jbevren | (I thought) :) |
| 14:56.53 | prpplague | doh |
| 14:56.57 | prpplague | yea you are right |
| 14:57.01 | jbevren | I figured they were running in parallel to get 32bits |
| 14:57.25 | prpplague | jbevren: well most sdram controlers have a method for banking |
| 14:57.41 | prpplague | jbevren: BA0 and BA1 |
| 14:57.43 | jbevren | for bandwidth yeah |
| 14:57.54 | jbevren | (that, and some dimms are double-bank) |
| 14:58.20 | prpplague | jbevren: well this allows it to read two x16 chips as a single 32bit |
| 15:00.14 | prpplague | jbevren: i'm wondering if i should configure the pixter-mm usb as host or slave |
| 15:01.28 | prpplague | jbevren: ahh nm, the 79524 only has slave |
| 15:01.58 | jbevren | yeah |
| 15:01.59 | jbevren | slave only |
| 15:02.00 | prpplague | cool beans |
| 15:02.11 | jbevren | host would be reasonably cool :) |
| 15:02.22 | prpplague | yea |
| 15:02.36 | prpplague | not hard to add since we have address/data available |
| 15:02.42 | jbevren | nod |
| 15:02.45 | jbevren | use an external HCI |
| 15:02.52 | prpplague | jbevren: were you able to trace down the boot configuration gpio's ? |
| 15:03.09 | jbevren | not yet. Last night was pretty busy |
| 15:03.17 | prpplague | np |
| 15:03.30 | jbevren | I'd like to though, being a step ahead of you is a bit fun ;-) |
| 15:03.43 | jbevren | :-D lol |
| 15:06.15 | jbevren | ah thats why I couldnt find it by partno |
| 15:06.19 | jbevren | MT48LC16M16A2P-75 IT:D TR |
| 15:06.21 | jbevren | they add a P |
| 15:06.40 | prpplague | hmm, i think thats a different model |
| 15:07.00 | prpplague | ahh no you are right |
| 15:47.34 | jbevren | hm |
| 15:47.37 | jbevren | $12.54 per IC |
| 15:47.41 | jbevren | gak. heh |
| 15:47.49 | jbevren | the 128Mbit ones are t.39 |
| 15:47.51 | jbevren | er 5.39 |
| 15:48.42 | prpplague | wow they really have those marked up |
| 15:49.01 | prpplague | guess we'll just go with the 8m16's |
| 15:52.16 | jbevren | well |
| 15:52.22 | jbevren | if you dont buy 1000 you dont get em cheap :) |
| 15:52.30 | jbevren | DK marks up pretty high either way |
| 16:06.48 | jbevren | but their techs are smart |
| 16:06.48 | jbevren | and open boxes for me to see what comes with items |
| 16:06.48 | jbevren | hehe |
| 16:06.48 | jbevren | I asked about the weller iron they have |
| 16:06.49 | jbevren | the 24v controlled-output one. They didnt know if it came with tips, so a tech got one and opened the box |
| 16:06.51 | jbevren | oh I mis-read. the 128Mbit in singles is 9.50 per IC |
| 16:06.53 | jbevren | its 5.39 in 1000s |
| 16:08.32 | *** join/#edev jbevren (n=jbevren@dumt-02-164.dsl.netins.net) |
| 16:10.38 | *** join/#edev JoseJX (n=JoseJX@c-67-171-66-14.hsd1.pa.comcast.net) |
| 16:18.21 | jbevren | doh |
| 16:18.26 | jbevren | stupid isp |
| 16:21.34 | *** mode/#edev [+o jbevren] by agaffney |
| 16:22.59 | jbevren | allo |
| 16:24.21 | *** join/#edev leoncamel (n=leoncame@219.142.132.189) |
| 16:59.56 | jbevren | I want to get header connectors that attach to one pin |
| 17:00.00 | jbevren | cant seem to find em heh |
| 17:00.15 | prpplague | jbevren: ?? |
| 17:00.27 | jbevren | prpplague: for the jtag dongle |
| 17:00.28 | prpplague | jbevren: what kind of headers? |
| 17:00.39 | jbevren | to connect to, for example, motherboard front panel pins |
| 17:00.53 | jbevren | the 2.54mm pitch headers |
| 17:01.15 | prpplague | jbevren: all the mb headers i've seen are .1" |
| 17:01.20 | jbevren | yeah |
| 17:01.26 | jbevren | thats 2.54mm isnt it? heh |
| 17:01.33 | prpplague | ahh |
| 17:01.36 | jbevren | but anyway, I need those connectors. I know they exist |
| 17:01.47 | prpplague | you want the header or the socket? |
| 17:01.50 | jbevren | prpplague: I know youre in a metric-using area, so I tend to speak metric. sorry :) |
| 17:02.01 | jbevren | you know the plugs for speaker, power, etc |
| 17:02.06 | jbevren | like the power is 2 pins |
| 17:02.12 | prpplague | jbevren: true, but i'm still english minded |
| 17:02.14 | jbevren | I want 1-pin ones :) |
| 17:02.21 | jbevren | I know they exist. heh |
| 17:02.25 | prpplague | jbevren: you want the sockets |
| 17:02.33 | jbevren | cable-end yeah |
| 17:02.49 | prpplague | jbevren: yea i suspect those would be hard to find perse |
| 17:03.01 | prpplague | jbevren: what you want it test pin cables |
| 17:03.03 | jbevren | maybe I should just call digikey heh |
| 17:03.07 | jbevren | ahh |
| 17:03.17 | prpplague | one sec let me see if i can get you a url |
| 17:03.34 | jbevren | preferrably from digikey atm, since I'm already getting a bunch of stuff |
| 17:03.35 | jbevren | lol |
| 17:04.42 | jbevren | http://rocky.digikey.com/WebLib/E-Z%20Hook/Web%20Photos/9167-24%20BLK.jpg <- shrinkwrap-covered end |
| 17:04.47 | jbevren | but without the wire attached |
| 17:04.48 | jbevren | hehe |
| 17:04.59 | jbevren | I guess I could just do their trick and shrinkwrap it |
| 17:05.11 | jbevren | that way I can buy regular plugs and just discard the plastic shell |
| 17:06.03 | prpplague | yea |
| 17:08.32 | jbevren | hrm |
| 17:08.37 | jbevren | now to find the plugs hehe |
| 17:10.52 | prpplague | you could always buy the 4 or 10 position packages and cut them |
| 17:10.57 | prpplague | i've done that before |
| 17:11.00 | jbevren | hehe |
| 17:11.18 | jbevren | well, I was thinking of getting the 4 or 10pos plugs and just using the metal bit with heatshrink tube :) |
| 17:11.20 | prpplague | hell you could almost pick up about of those pc header connectors at your local pc store |
| 17:13.33 | jbevren | I live in a small town |
| 17:13.36 | jbevren | no such thing :0 |
| 17:13.45 | jbevren | nearest thing is best buy, who want $35 for a 2port usb card |
| 17:13.55 | prpplague | jeeze |
| 17:16.32 | jbevren | no doubt they'll want $40 for one 10pin header :) |
| 17:16.47 | prpplague | hehe |
| 17:17.32 | jbevren | nearest likely store is in des moines |
| 17:17.37 | jbevren | 1.5 hours away |
| 17:17.43 | jbevren | and I dont know if one's actually there |
| 17:18.55 | prpplague | des moines is pretty large city isn't it? |
| 17:19.11 | prpplague | i would be surprised if you couldn't find a pc shop with some old cases |
| 17:20.09 | jbevren | lol |
| 17:20.11 | jbevren | choices: |
| 17:20.14 | jbevren | receptacle or socket |
| 17:49.18 | *** join/#edev catastr0p (n=catastr0@d14-69-178-65.try.wideopenwest.com) |
| 18:01.41 | jbevren | prpplague: schmartboard's is cheaper at $9.99 |
| 18:01.44 | jbevren | http://www.schmartboard.com/index.asp?page=products_so&id=56 |
| 18:03.09 | jbevren | that, and I'd like to try one heh |
| 18:04.52 | jbevren | hehe |
| 18:05.01 | jbevren | 4-72pin .8mm tsop schmartboard |
| 18:05.02 | prpplague | doesn't support tsop |
| 18:05.08 | prpplague | were |
| 18:05.10 | prpplague | ? |
| 18:05.19 | jbevren | SOP, 4 - 72 Pins 0.8mm Pitch, 2" X 2" Grid EZ Version |
| 18:05.21 | jbevren | http://www.schmartboard.com/index.asp?page=products_so&id=56 |
| 18:05.34 | prpplague | says only for TSSOP not TSOP |
| 18:06.06 | prpplague | plus it the pins don't look to be on .1" |
| 18:06.08 | prpplague | brb |
| 18:07.25 | jbevren | tsop tssop tssssssssssssoppararaeaurzzz |
| 18:07.27 | jbevren | whats the diff heh |
| 18:07.37 | jbevren | the legs are .8mm pitch |
| 18:07.41 | jbevren | the pads are too |
| 18:07.42 | jbevren | shrug |
| 18:07.51 | jbevren | :( |
| 18:09.48 | *** join/#edev prpplague (n=billybob@72.22.131.136) |
| 18:10.00 | jbevren | wb |
| 18:10.12 | jbevren | so waht's different betwen tsop and tssop? The legs and pats have the same pitch |
| 18:11.40 | prpplague | basically the orientation |
| 18:12.00 | prpplague | from what i gather |
| 18:12.30 | prpplague | i could look in more detail later |
| 18:12.39 | prpplague | trying to bring up a new board at the momment |
| 18:12.44 | jbevren | ah |
| 18:12.47 | *** mode/#edev [+o prpplague] by ChanServ |
| 18:15.19 | prpplague | give that url again |
| 18:17.42 | jbevren | I give up, I'll just chop the plug off hehe |
| 18:17.45 | jbevren | er |
| 18:17.45 | jbevren | wrong window |
| 18:17.49 | jbevren | http://www.schmartboard.com/index.asp?page=products_so&id=56 |
| 18:20.34 | jbevren | looks like tssop/tsop are a differenc ein width (between pin rows) |
| 18:21.22 | jbevren | and now that you point out that theyre not .100 centers, youre right |
| 18:21.27 | jbevren | theyre staggered heh |
| 18:21.38 | jbevren | maybe the others are a better idea after all for prototyping |
| 18:22.01 | prpplague | yea |
| 18:22.18 | prpplague | jbevren: those would be ok if you were doing custom pcb's for testing |
| 18:22.47 | jbevren | I know the .100" centered ones are better for breadboarding |
| 18:22.54 | jbevren | but I figured these would be ok for the pixter |
| 18:23.08 | jbevren | its goign to end up being run point-to-point anyway |
| 18:24.08 | prpplague | yea, just alot easier for me with .1" |
| 18:24.25 | jbevren | The pin layout isnt so close here imho though |
| 18:24.31 | jbevren | its just hex packing vs rectangular packing |
| 18:24.38 | prpplague | what i really need is something i solder in place of the sdram that has some headers |
| 18:24.55 | jbevren | however, since I'd liek to breadboard some of the sdram ICs, I'll get the ones from saelig |
| 18:26.23 | prpplague | jbevren: yea i think the ones from saelig are probably a better choice |
| 18:26.34 | prpplague | jbevren: easier to mount different packages imho |
| 18:26.40 | jbevren | not sure how the double-row headers will work on a breadboard :) |
| 18:26.49 | jbevren | but yeah, these support different packages |
| 18:39.42 | jbevren | digikey $340 me $0 |
| 18:39.45 | jbevren | so far theyre winning :( |
| 18:39.46 | jbevren | heh |
| 18:42.20 | prpplague | hehe |
| 18:42.29 | prpplague | jbevren: see theres what i say about radio shack |
| 18:42.46 | prpplague | jbevren: i spend on average $300USD month on parts |
| 18:42.57 | prpplague | jbevren: not a penny of that at radio shack |
| 18:43.07 | prpplague | jbevren: they totally alienated their client base |
| 18:43.51 | JoseJX | Don't they only sell cell phones? :p |
| 18:45.08 | jbevren | hehe |
| 18:45.22 | jbevren | the only thing I get at radio shack is plugs and gator clips |
| 18:45.33 | jbevren | Radio Shack: You have questions? We have blank stares. |
| 18:45.44 | jbevren | Radio Shack: You got money? We got pockets. |
| 18:46.14 | jbevren | :) |
| 18:46.24 | jbevren | prpplague: I dont imagine there's a radioshack near you |
| 18:52.11 | prpplague | jbevren: no not radio shack |
| 18:52.19 | prpplague | jbevren: or anything else that sells electronics |
| 18:52.30 | prpplague | jbevren: everything has to come from overseas |
| 18:52.44 | prpplague | jbevren: i've actually been tinkering with the idea of opening up a shop |
| 18:53.12 | jbevren | http://www.saelig.com/miva/merchant.mvc?Screen=PROD&Product_Code=PS1&Category_Code=PS1 |
| 18:53.13 | prpplague | jbevren: "Geeks Paradise" , components, gadgets, and games |
| 18:53.14 | jbevren | nice psu |
| 18:53.34 | jbevren | prpplague: What city? :) |
| 18:53.42 | prpplague | oh wow, never seen that |
| 18:53.48 | prpplague | jbevren: ??? |
| 18:54.03 | jbevren | your store |
| 18:54.24 | prpplague | jbevren: i still do not understand your question |
| 18:54.31 | jbevren | could get reseller deals with schmartboard and saelig heh |
| 18:54.43 | jbevren | prpp; what city are you pondering opening your store in? :) |
| 18:54.52 | jbevren | is there much demand for a geek store in barbados? :) |
| 18:54.57 | prpplague | hehe, the only city on the island |
| 18:55.12 | prpplague | jbevren: yes and no |
| 18:55.24 | prpplague | jbevren: like i said all the parts have to come from overseas |
| 18:55.39 | prpplague | jbevren: so sometimes ppl have to wait 3 or 4 weeks for something to be repaired |
| 18:56.19 | prpplague | jbevren: they don't sell little cheapy stuff like the small digital camera's or small dvd players |
| 18:56.30 | prpplague | jbevren: probably bring in alot of the stuff like that |
| 18:56.55 | prpplague | jbevren: basically make it kind of a "Game Stop" like place, just a little more generic |
| 18:57.04 | prpplague | jbevren: not so specialized in games |
| 18:58.15 | jbevren | ahhh |
| 19:00.21 | prpplague | jbevren: print up laminated cards for their "credit" accounts |
| 19:00.30 | prpplague | jbevren: have them trade games and dvd's in |
| 19:00.33 | jbevren | http://www.saelig.com/miva/merchant.mvc?Screen=PROD&Product_Code=U030&Category_Code=UB |
| 19:00.35 | jbevren | aint it cuuuute |
| 19:00.36 | prpplague | jbevren: as well as computer parts |
| 19:00.41 | jbevren | prpplague: cool |
| 19:01.04 | prpplague | jbevren: just an idea right now |
| 19:01.08 | jbevren | yeah |
| 19:01.09 | prpplague | jbevren: yea seen those before |
| 19:01.16 | prpplague | jbevren: i much prefer the ftdi chips |
| 19:01.24 | jbevren | I just thought the footprint was nice |
| 19:01.30 | jbevren | I have a ftdi adapter in the cart |
| 19:01.43 | prpplague | jbevren: i could go over to the states, buy a bunch of stuff cheap, and have it shipped here |
| 19:01.51 | prpplague | jbevren: which one? |
| 19:02.08 | jbevren | http://www.saelig.com/miva/merchant.mvc?Screen=PROD&Product_Code=U004 |
| 19:02.16 | jbevren | it's cheap, it does 921kbps |
| 19:02.21 | jbevren | what more do you need heh |
| 19:02.42 | prpplague | hmm, i wouldn't get that one |
| 19:02.46 | prpplague | but thats jsut me |
| 19:02.47 | jbevren | whyso |
| 19:03.13 | prpplague | you could get ft2232 that also has jtag,i2c and spi as well as rs-232 |
| 19:03.47 | prpplague | http://www.dlpdesign.com/usb/2232m.shtml |
| 19:03.57 | prpplague | it rocks |
| 19:04.20 | jbevren | see, |
| 19:04.29 | jbevren | I'm trying to not get 1 thing from each of 50 stores |
| 19:04.36 | prpplague | hehe |
| 19:04.43 | jbevren | and I want a 9pin port heh |
| 19:04.45 | prpplague | i think digikey sells those |
| 19:04.53 | jbevren | too late, I submitted the order to dk :) |
| 19:04.57 | jbevren | I'm at saelig now heh |
| 19:04.58 | prpplague | hehe |
| 19:05.17 | jbevren | http://www.saelig.com/miva/merchant.mvc?Screen=PROD&Product_Code=IO003&Category_Code=UB <- interfacing old 8bitters to usb |
| 19:05.22 | jbevren | have you used these? |
| 19:06.00 | prpplague | yea, i much prefer the ez-usb stuff |
| 19:06.41 | prpplague | jbevren: one sec and i'll give you a couple urls |
| 19:06.45 | jbevren | ok |
| 19:06.59 | prpplague | jbevren: basically the same item - http://www.the-console-corner.com/shop/product.php?productid=6546 |
| 19:07.17 | jbevren | a 24pin GPIO device |
| 19:07.19 | jbevren | versus a flash writer |
| 19:07.26 | jbevren | hehe |
| 19:07.28 | prpplague | jbevren: here is a full list including some commerical items - http://www.elinux.org/wiki/EzUsb |
| 19:07.41 | prpplague | jbevren: the flash write is nothing more than the same unit |
| 19:07.48 | prpplague | jbevren: the gpio's are used to do the flashing |
| 19:07.52 | jbevren | yeah with different firmware on the ubicom I guess :) |
| 19:07.56 | prpplague | yea |
| 19:08.02 | jbevren | I have a sx48 to dip board |
| 19:08.09 | jbevren | I played with the sx24 for a while |
| 19:08.19 | jbevren | started on a 65c02 emulation core for the sx48 |
| 19:08.34 | jbevren | then I realized that its barely too slow to do in-socket soft-emulation at 1mhz |
| 19:08.34 | jbevren | :( |
| 19:12.36 | jbevren | heh the DLP-USB232M is at saelig too |
| 19:13.18 | prpplague | but not the 2232? |
| 19:13.25 | jbevren | nope. |
| 19:13.40 | jbevren | I didnt see it in the serial or usb boar dlist anyway |
| 19:14.25 | jbevren | heh. funny, |
| 19:14.34 | jbevren | I look at saelig's lcd's and think.. the pixter was cheaper |
| 19:14.55 | jbevren | and my friend scoffed at me getting one |
| 19:15.39 | *** join/#edev redblue (i=star@ppp150.109-253-207.mtl.mt.videotron.ca) |
| 19:15.40 | prpplague | hehe |
| 19:17.33 | prpplague | the usb-wiz whip looks interesting |
| 19:18.23 | *** join/#edev Chocobo (n=swinchen@70-33-147-28.agstme.adelphia.net) |
| 19:19.05 | jbevren | hm link? |
| 19:19.37 | prpplague | http://www.saelig.com/miva/merchant.mvc?Screen=PROD&Product_Code=FF001&Category_Code=UB |
| 19:21.08 | jbevren | oh |
| 19:21.14 | jbevren | now that you link it I recognize it |
| 19:22.14 | jbevren | evilm an |
| 19:22.17 | jbevren | er evil man |
| 19:22.37 | jbevren | oh I'll need a breakout board too |
| 19:23.59 | jbevren | not 480Mbit |
| 19:24.31 | jbevren | reading the datasheet? |
| 19:26.35 | jbevren | it has jtag pins |
| 19:26.35 | jbevren | all labeled "leave unconnected" |
| 19:26.35 | jbevren | but named tms tck tdi tdo :) |
| 19:35.14 | jbevren | pdf says nothing about tcp/ip |
| 19:36.31 | jbevren | we know it has 64 pins but not what package they use heh |
| 19:39.17 | agaffney | who has a usb card working with the walnut? |
| 19:43.00 | prpplague | usb card? |
| 19:56.49 | jbevren | _o/ |
| 19:57.10 | jbevren | 0000:00:02.1 USB Controller: NEC Corporation USB (rev 43) |
| 20:00.17 | dfarnsworth | I tried out a generic ohci card without problems |
| 20:36.19 | agaffney | will you guys add that information to the hardware known to work page for the walnut? |
| 20:45.32 | dfarnsworth | agaffney, sorry. I think a hardware-known-*not*-to-work list is good, but not the known-to-work list, since my expectation is that most things do. |
| 20:45.47 | agaffney | well, both are on that page |
| 20:46.02 | dfarnsworth | yep, :) |
| 20:46.08 | agaffney | and the known-to-work is good for stuff like video cards |
| 20:46.56 | dfarnsworth | there, it should match the ppc known-to-work cards or maybe the non-x86 known-to-work cards. |
| 20:47.31 | dfarnsworth | not that I've looked for such lists. :( |
| 20:55.37 | *** join/#edev Chocobo (n=swinchen@70-33-147-28.agstme.adelphia.net) |
| 21:35.54 | *** join/#edev GPSFan (n=Ken@65.121.49.208) |
| 21:35.54 | *** mode/#edev [+o GPSFan] by ChanServ |
| 21:46.24 | jbevren | re gpsfan |
| 21:57.25 | GPSFan | jbevren: howdy, what's new? |
| 21:57.38 | jbevren | not much |
| 21:57.49 | jbevren | prpplague is evil and tempts me but thats normal |
| 21:57.51 | jbevren | lol :) |
| 21:58.03 | GPSFan | hehe |
| 21:58.12 | jbevren | I got junk from digikey and saelig |
| 21:58.36 | GPSFan | goodies? |
| 21:58.49 | jbevren | nod. Some caps to fix my nephew's computer from digikey |
| 21:58.56 | jbevren | plus finally a decent temp-controlled iron heh |
| 21:59.04 | jbevren | other assorted goodies, and some sdram ICs |
| 21:59.13 | GPSFan | ah, |
| 21:59.24 | jbevren | saelig has breakout boards for the sdram ICs |
| 21:59.36 | *** join/#edev EvilDevil (n=evildevi@p54A6D882.dip.t-dialin.net) |
| 21:59.45 | GPSFan | for your pixter? |
| 22:03.03 | jbevren | yeah |
| 22:03.12 | jbevren | I got four actually.. 2 for pixter, 2 for breadboarding |
| 23:01.04 | *** join/#edev Chocobo (n=swinchen@70-33-147-28.agstme.adelphia.net) |
| 23:11.51 | *** join/#edev p-crat (n=p-crat@lns-bzn-41-82-64-218-21.adsl.proxad.net) |
| 23:37.11 | agaffney | that's...odd |
| 23:37.20 | agaffney | I'm getting an I/O error writing to /dev/sound/dsp |
| 23:40.03 | *** join/#edev p-crat (n=p-crat@lns-bzn-41-82-64-218-21.adsl.proxad.net) |
| 23:50.48 | *** join/#edev joe_bleau (n=joe_blea@208.191.55.115) |
| 23:54.57 | agaffney | do_vfs_lock: VFS is out of sync with lock manager! |
| 23:54.59 | agaffney | is that bad? |
