| 00:00.54 | prpplague | CosmicPenguin: http://buildroot.busybox.net/cgi-bin/viewcvs.cgi/trunk/buildroot/target/device/AMD/ |
| 00:17.18 | CosmicPenguin | nice |
| 00:24.38 | joe_bleau | prpplague: no word, no email bounces, no nothing. |
| 00:28.53 | CosmicPenguin | I saw the guy who runs the linux-hacker list for nanogui the other day - he's still around |
| 00:35.30 | joe_bleau | I wonder where sparkfun has their price breaks...if this BT job works out, I'll need 20-30 BT modules. |
| 00:38.52 | Puff-afk-worky | joe_bleau, far as I know they dont...but you can probably email them and ask. |
| 00:39.15 | Puff-n-Stuff | you might also look for the real manufacturer of them...a lot of their stuff is done by olimex... |
| 00:39.45 | joe_bleau | Yeah, 10-20 starts to get out of the hobby realm. |
| 00:40.00 | joe_bleau | I've got a couple of Olimex ARM dev boards...not all that impressed. |
| 00:40.09 | joe_bleau | They were cheap, and it shows. |
| 00:40.15 | Puff-n-Stuff | I like their little atmega128 board. |
| 00:40.30 | Puff-n-Stuff | except for the fact that it is square and I needed to cut up an old solderless breadboard to mate to it. |
| 00:41.59 | Puff-n-Stuff | I just got some of their little 2.4ghz wireless modules... |
| 00:42.09 | Puff-n-Stuff | so far they seem to work fine.. |
| 00:42.32 | Puff-n-Stuff | hooked them up and sent a datastream from one avr to another and back.. |
| 01:00.36 | *** mode/#edev [+o prpplague] by ChanServ |
| 01:24.53 | *** join/#edev agaffney (n=agaffney@gentoo/developer/pdpc.active.agaffney) |
| 01:25.15 | *** join/#edev agaffney (n=agaffney@gentoo/developer/pdpc.active.agaffney) |
| 02:00.07 | *** join/#edev leoncamel (n=leoncame@219.238.107.107) |
| 02:31.15 | *** join/#edev prpplague (n=dave@72.22.149.103) |
| 04:36.03 | jbevren | prpplague: ping |
| 05:09.33 | *** join/#edev tuxmaniac (n=aanjhan@59.92.35.186) |
| 05:14.50 | jbevren | prpplague: just in case you read backscroll, there's a pair of pads (as probably for a 0-ohm resistor) labelled CS1 on the pixterMM |
| 05:15.04 | jbevren | there's a trace between the pads, which will likely make it easy to disconnect the COB rom |
| 05:33.56 | *** join/#edev catastr0p (n=catastr0@d14-69-178-65.try.wideopenwest.com) |
| 05:55.23 | *** join/#edev aanjhan_ (n=aanjhan@59.92.37.138) |
| 06:26.00 | *** join/#edev redblue (i=star@ppp044.108-253-207.mtl.mt.videotron.ca) |
| 06:28.27 | *** join/#edev leoncamel (n=leoncame@219.238.107.107) |
| 08:22.10 | *** join/#edev bd2 (n=ufo@81.222.177.146) |
| 09:17.26 | *** join/#edev flyback (n=d3200@c-67-165-88-141.hsd1.pa.comcast.net) |
| 09:17.45 | flyback | how the hell can I confirm what chip is in a usb to ide cable without being able to physically take away the unit |
| 09:18.46 | flyback | I thought mabye usb id but getting weird stuff |
| 09:21.16 | flyback | this is so frustrating all I want to do is get the pdf so I know of any issues I have to work around |
| 09:32.07 | flyback | nm I found it |
| 09:32.12 | flyback | I found it the first time like I thought |
| 09:32.26 | flyback | they ass-backwards a chip not meant for this to work |
| 09:32.27 | flyback | ugh |
| 10:13.13 | Puff-n-Stuff | flyback, far as I know you need to open it and look at the chip. |
| 10:14.06 | Puff-n-Stuff | the two usb-to-ide devices I have opened were FPGA based...no specific usb chip.. |
| 12:03.07 | *** join/#edev leoncamel (n=leoncame@219.142.141.61) |
| 12:37.25 | *** join/#edev prpplague (n=billybob@72.22.131.137) |
| 12:48.27 | jbevren | yawn |
| 12:56.23 | prpplague | jbevren: you look at the lcd for a manufacturer? |
| 13:00.21 | jbevren | its a custom lcd |
| 13:00.31 | jbevren | no mfr, a couple codes that dont come up on search engines |
| 13:01.24 | prpplague | i suspect that its a microtip |
| 13:01.29 | prpplague | or dataimage |
| 13:01.32 | jbevren | ah |
| 13:01.43 | jbevren | it does have a pair of driver IC's on the glass |
| 13:02.15 | prpplague | jbevren: yea thats normal with tft |
| 13:02.30 | prpplague | jbevren: probably also the voltage conversion |
| 13:03.27 | jbevren | nod |
| 13:03.31 | jbevren | it does use an led backlight |
| 13:05.26 | prpplague | ahh good |
| 13:05.28 | *** join/#edev GPSFan (n=Ken@12.10.255.248) |
| 13:05.28 | *** mode/#edev [+o GPSFan] by ChanServ |
| 13:05.38 | prpplague | i should have some time starting around wed or thursday to start hacking |
| 13:05.46 | prpplague | i think i can get it booting with 4mb ram |
| 13:05.59 | prpplague | but i'm not sure what we can actually do with it from there |
| 13:07.36 | jbevren | nod |
| 13:07.41 | jbevren | did you catch my note about the CS1 pads? |
| 13:07.50 | jbevren | I as thinking about you talking of cs1 yesterday |
| 13:08.02 | jbevren | there are a pair of pads (I described them in the original wiki page) for cs1 |
| 13:08.05 | prpplague | jbevren: yea you had already posted that info on the pixtermm page |
| 13:09.27 | jbevren | heh just wanting to make sure you didnt forget it too :) |
| 13:10.14 | jbevren | brb |
| 13:10.57 | prpplague | jbevren: yea, i do my research, hehe |
| 13:11.09 | prpplague | jbevren: pixtermm page was also updated with the link for the lcd info |
| 13:17.03 | jbevren | cool |
| 13:26.21 | prpplague | http://www.elinux.org/wiki/enc28j60 |
| 13:26.35 | jbevren | btw, did you want the numeric codes off the lcd? |
| 13:27.13 | prpplague | jbevren: yes please |
| 13:27.26 | jbevren | (grammar cop) Error in the 2.4 driver paragraph: "This is <add a> VERY ugly.." |
| 13:27.29 | jbevren | (/grammar cop) |
| 13:27.33 | jbevren | ok, one sec |
| 13:27.40 | jbevren | this is on the plastic frame the lcd's in |
| 13:27.45 | jbevren | I'm not going to pry the lcd out of it :) |
| 13:28.15 | jbevren | LQ038B3DD01 |
| 13:28.28 | prpplague | thats a sharp lcd |
| 13:28.35 | jbevren | 05G061054A Q |
| 13:28.53 | jbevren | you know your lcd's better than I do for certain ;_ |
| 13:28.58 | jbevren | it does use an led backlight |
| 13:33.56 | prpplague | yea thats a custom sharp lcd |
| 13:34.31 | jbevren | oh |
| 13:34.38 | jbevren | I snapped the touch panel :( |
| 13:34.40 | jbevren | grumble |
| 13:34.42 | jbevren | heh |
| 13:34.44 | Puff-n-Stuff | oops. |
| 13:34.45 | prpplague | doh |
| 13:34.51 | jbevren | the lcd's fine though |
| 13:34.54 | jbevren | so I'm not totally out |
| 13:35.28 | jbevren | got any docs on the lcd then? |
| 13:35.49 | prpplague | jbevren: http://www.sharpsma.com/Page.aspx/americas/en/part/LQ030B7DD01/ |
| 13:35.59 | prpplague | jbevren: thats the double size version of it |
| 13:36.40 | prpplague | jbevren: can you double check to make sure that its LQ038 and not LQ030 ? |
| 13:37.07 | jbevren | Id mistake an 8 for a b, but not a 0 for an 8 (sharp doesnt cross their 0's) |
| 13:37.12 | jbevren | its certainly an lq038 |
| 13:37.45 | prpplague | ok just double checking |
| 13:37.49 | jbevren | yep np |
| 13:37.49 | prpplague | no offense intended |
| 13:37.56 | jbevren | none taken |
| 13:38.13 | jbevren | when I read it the first time last night, I read lq0388 instead of lq038b heh |
| 13:38.26 | jbevren | so, I understand 100% |
| 13:38.28 | jbevren | btw |
| 13:38.33 | jbevren | mattel LOVES masking tape |
| 13:40.37 | prpplague | jbevren: there is a scheme for the model number trying to look now |
| 13:40.58 | jbevren | nod |
| 13:41.16 | jbevren | hm |
| 13:41.23 | jbevren | I could handle a 320x240 one :D |
| 13:47.09 | prpplague | it appears that the only difference between the lq030 and lq038 is the quality of the screen |
| 13:49.56 | jbevren | 038 being lower I'm guessing (since its in an inexpensive device) |
| 13:50.43 | prpplague | jbevren: yea |
| 13:50.46 | jbevren | ohh sweet the enc28j60's available in pdip |
| 13:51.17 | prpplague | jbevren: looks like the lq038 has lower brightness and slightly larger pixel size |
| 13:51.24 | jbevren | ah |
| 13:51.30 | jbevren | yeah, there are 3 led's on the backlight |
| 13:51.44 | jbevren | I removed the backlight cause its soldered to the lcd board |
| 13:52.13 | jbevren | cool |
| 13:54.18 | Puff-n-Stuff | jbevren, it is also available as free samples. |
| 13:54.30 | Puff-n-Stuff | I have half a dozen of them here that microchip has sent me. |
| 13:56.15 | jbevren | heh |
| 13:56.20 | jbevren | indeed |
| 13:56.36 | Puff-n-Stuff | one thing I will give microchip..they are good for their free samples... |
| 13:58.59 | Puff-n-Stuff | though I consider PICs second class citizens compared to AVRs |
| 13:59.25 | Puff-n-Stuff | they do make some other nice chips though. |
| 13:59.36 | Puff-n-Stuff | I was rather impressed with their IRDA stack chips. |
| 14:01.28 | prpplague | jbevren: that second number you found is the Lot number |
| 14:01.44 | jbevren | they were on the same sticker |
| 14:01.47 | jbevren | I figured the second was irrelevant |
| 14:01.49 | jbevren | (sp?) |
| 14:03.14 | prpplague | jbevren: yea, doesn't really provide anything other than when it was manufacturered |
| 14:03.48 | jbevren | nod |
| 14:06.25 | prpplague | jbevren: interesting |
| 14:06.49 | prpplague | jbevren: seems the the LQ031B1DD01 is used in a palm IIIc |
| 14:07.04 | prpplague | jbevren: same 160x160 |
| 14:07.13 | Puff-n-Stuff | hehe. |
| 14:07.17 | jbevren | crazy |
| 14:07.23 | Puff-n-Stuff | should be plenty of documentation on that. |
| 14:07.27 | jbevren | yep |
| 14:07.36 | prpplague | i'm assuming the the LQ038 is a reference to the overall size |
| 14:07.54 | jbevren | formfactor eh? |
| 14:08.02 | prpplague | BxDD01 seems to be consistant with square formfactor |
| 14:08.09 | jbevren | gak. fingerprinted the lcd glass heh |
| 14:08.19 | jbevren | by golly |
| 14:08.20 | jbevren | it is square |
| 14:08.24 | jbevren | I never really looked to see :0 |
| 14:08.29 | Puff-n-Stuff | I need to get a small palmtop type puter...something I can put linux on and avr-gcc... |
| 14:08.29 | prpplague | where x=resolution |
| 14:08.51 | prpplague | B7DD01 appears to be 320x320 |
| 14:09.01 | jbevren | gah need to pay attention to work for a bit :D |
| 14:09.04 | prpplague | B1DD01 and B3DD01 appear to be 160x160 |
| 14:09.15 | prpplague | Puff-n-Stuff: plenty out there |
| 14:09.23 | Puff-n-Stuff | need cash too. |
| 14:09.24 | Puff-n-Stuff | hehe |
| 14:09.26 | prpplague | Puff-n-Stuff: toshiba libretto would work well for you |
| 14:09.41 | prpplague | Puff-n-Stuff: get that around $75-$100 |
| 14:10.02 | jbevren | remind me, do the librettos have parallel ports? |
| 14:10.10 | jbevren | . o O ( jtag wiggler box ) |
| 14:10.11 | jbevren | heh |
| 14:10.38 | Puff-n-Stuff | I have an IBM thinkpad x30 already. |
| 14:11.11 | jbevren | oh wait my fujitsu dock has a paraport |
| 14:12.59 | prpplague | x30 ? isn't that mips based? |
| 14:13.33 | Puff-n-Stuff | no. |
| 14:13.36 | Puff-n-Stuff | celeron. |
| 14:13.47 | jbevren | heh I like edtp's name for the breakout board |
| 14:13.50 | jbevren | "Frame thrower" |
| 14:14.16 | Puff-n-Stuff | Pentium-III-M 1.2ghz |
| 14:14.28 | Puff-n-Stuff | err |
| 14:14.36 | Puff-n-Stuff | Pentium-M-III 1.2ghz |
| 14:14.39 | Puff-n-Stuff | something like that. |
| 14:14.47 | Puff-n-Stuff | with 1gb of ram and a 40gb harddrive. |
| 14:15.02 | Puff-n-Stuff | nice little machine but I was hoping for something more pocketable. |
| 14:15.18 | Puff-n-Stuff | easier to shove into this dev case Im working on. |
| 14:15.21 | jbevren | I have a fujitsu B142 |
| 14:15.34 | jbevren | 300mhz celeron, subnotebook formfactor with touchscreen lcd |
| 14:15.43 | Puff-n-Stuff | wish I had a touchscreen. |
| 14:15.54 | prpplague | interesting |
| 14:15.56 | Puff-n-Stuff | well |
| 14:15.57 | Puff-n-Stuff | I do |
| 14:16.00 | Puff-n-Stuff | but its not portable. |
| 14:16.10 | prpplague | someone at sharp must have a sense of humor |
| 14:16.11 | Puff-n-Stuff | have a 15inch tft touchscreen from ELO |
| 14:16.36 | prpplague | the numbering scheme seems to hold "B square" hehe |
| 14:16.43 | Puff-n-Stuff | hehe |
| 14:17.56 | jbevren | http://yro.slashdot.org/article.pl?sid=06/06/02/1238237&from=rss |
| 14:18.00 | jbevren | Welcome to china, everyone |
| 14:18.09 | prpplague | LQ038B3DD01 , Low Quality, 3.8" |
| 14:18.18 | jbevren | us gov't: "Retain data ISPs, or we will make it law." |
| 14:23.58 | Puff-n-Stuff | I can see them requiring every packet transmitted to be recorded and retained. |
| 14:27.02 | jbevren | time to constantly stream internet radio from odd ports |
| 14:27.34 | Puff-n-Stuff | stream /dev/random on 22, 23, and 25 |
| 14:34.22 | *** join/#edev davidc___ (n=davidc__@24.86.106.127) |
| 14:47.15 | *** join/#edev davidc___ (n=davidc__@24.86.106.127) |
| 14:48.56 | *** join/#edev EvilDevil_ (n=miau@p54A6F078.dip.t-dialin.net) |
| 14:52.22 | jbevren | hmm |
| 14:52.30 | jbevren | spi-based storage, spi-based ethernet |
| 14:52.35 | jbevren | we just need spi-based wireless now |
| 14:52.42 | jbevren | yeah yeah tere's one from hongkong |
| 14:52.43 | jbevren | hehe |
| 14:53.01 | jbevren | is that one available stateside or is it still pipedream stuff |
| 14:53.12 | jbevren | (and why is digg.com offline) |
| 14:57.38 | prpplague | jbevren: there are about 5 chips now available |
| 14:57.47 | prpplague | jbevren: but the manufacturers are keeping them close |
| 14:57.56 | prpplague | jbevren: i've got three samples |
| 14:58.18 | prpplague | jbevren: one from phillips, one from marvel, and one from someone i can't disclose |
| 15:00.06 | davidc__ | my guess would be atheros/broadcom for his canot be told one ;) |
| 15:00.51 | davidc__ | I get to play with atheros chips at work... they're interesting to say the least |
| 15:01.14 | jbevren | what the f/ck is up with redhat |
| 15:01.21 | jbevren | its -not- runnig /etc/rc3.d/S99local |
| 15:02.40 | prpplague | hmmm, ok all the lcds that are 320x240 from sharp have a Q7 |
| 15:02.57 | prpplague | but the ones that are 240x320 have either Q1 or Q5 |
| 15:03.16 | jbevren | prpplague: lis it 240x320 vs 320x240? |
| 15:03.53 | prpplague | well i would expect that if that was the only case then it would be either Q1 or Q5 not both |
| 15:04.18 | prpplague | jbevren: the 320x320 models have B7 |
| 15:04.35 | prpplague | jbevren: but the 160x160 models have B1 , B2 and B3 |
| 15:04.41 | jbevren | ah |
| 15:05.01 | prpplague | just can't figure out an numbering scheme for that |
| 15:05.49 | prpplague | B7DD01 is a 320x320 , B3DD01 is 160x160 and B1DD01 is 160x160 |
| 15:10.02 | jbevren | prpplague: you know |
| 15:10.06 | jbevren | the thing has got to have flash somewhere |
| 15:10.20 | jbevren | it saves settings and you can store one of your drawings on it |
| 15:11.04 | prpplague | jbevren: ha |
| 15:11.08 | prpplague | jbevren: good point |
| 15:11.26 | prpplague | jbevren: wonder if the second blob is some small eeprom |
| 15:11.37 | jbevren | or the third (there are three) |
| 15:11.38 | prpplague | jbevren: hmm |
| 15:11.38 | jbevren | but yeah |
| 15:11.48 | prpplague | jbevren: well one question |
| 15:11.59 | prpplague | jbevren: wonder if it stores the picture after you remove the batteries |
| 15:12.13 | jbevren | it stores the settings after battery removal |
| 15:12.23 | jbevren | but that could be easily done with a tiny eeprom |
| 15:12.48 | jbevren | although 160x160 is only um 25,600 bytes |
| 15:12.51 | prpplague | hmm, i sure wish i could figure this out |
| 15:12.59 | jbevren | figure _ out? |
| 15:13.08 | jbevren | insert nda clause here? |
| 15:13.09 | jbevren | hehe |
| 15:13.12 | prpplague | hehe |
| 15:13.19 | prpplague | no the sharp number scheme |
| 15:21.21 | Puff-n-Stuff | random numbers ment to confuse you. |
| 15:21.31 | Puff-n-Stuff | the real model number is written in invisible ink on the front face. |
| 15:22.47 | prpplague | hehe |
| 15:23.03 | prpplague | i suspect there is some logic to it |
| 15:23.07 | prpplague | just not sure what |
| 15:23.19 | prpplague | i was able to identify most of the code |
| 15:23.26 | Puff-n-Stuff | there is logic to /dev/random too if you look at it long enough. |
| 15:23.42 | jbevren | that depends on whether or not you have a hardware rng installed |
| 15:23.54 | prpplague | jbevren: http://www.surpluscomputers.com/store/main.aspx?p=ItemDetail&item=CES10719 |
| 15:24.06 | prpplague | jbevren: basically identical to the pixter lcd just smaller |
| 15:24.17 | jbevren | is that the 3c lcd? |
| 15:24.22 | prpplague | yea |
| 15:24.25 | jbevren | cool |
| 15:24.34 | jbevren | btw, my palmcam should be here monday |
| 15:25.07 | Puff-n-Stuff | with a palmcam, a palm, and a wireless card...doubled...you can make a pair of lookie-talkies! |
| 15:25.21 | jbevren | heh lookie-talkie |
| 15:25.24 | Puff-n-Stuff | yea. |
| 15:25.27 | Puff-n-Stuff | like walkie talkies |
| 15:25.29 | Puff-n-Stuff | only with video. |
| 15:25.30 | jbevren | Puff-n-Stuff: alas, my palm3 only has one serial port |
| 15:25.33 | jbevren | and that's it for it's IO |
| 15:25.40 | Puff-n-Stuff | ouch. |
| 15:25.55 | jbevren | it's likely possible to add another serial port |
| 15:25.55 | Puff-n-Stuff | six years ago I had a palm clone with cf, spi, and serial ports. |
| 15:26.01 | Puff-n-Stuff | the TRG Pro. |
| 15:26.44 | jbevren | cool |
| 15:26.51 | jbevren | I have a couple palm IIIxe's |
| 15:26.54 | Puff-n-Stuff | never did anything with it though. |
| 15:26.59 | Puff-n-Stuff | used it for a toy.. |
| 15:27.06 | Puff-n-Stuff | not jack for software out for it at the time. |
| 15:27.20 | Puff-n-Stuff | it had twice the resolution of the other palms on the market at the time too... |
| 15:27.39 | Puff-n-Stuff | and a virtual writing area...which could be turned off to use that area for display. |
| 15:28.01 | Puff-n-Stuff | was a sweet little toy for the time. |
| 15:28.13 | jbevren | I run jshopper on mine |
| 15:28.17 | jbevren | nicely handy application |
| 15:28.26 | Puff-n-Stuff | no idea what jshopper is. |
| 15:28.38 | jbevren | its a shopping list manager with an integrated store database |
| 15:28.43 | Puff-n-Stuff | hehe. |
| 15:28.48 | Puff-n-Stuff | I don't do enough shopping for that. |
| 15:29.08 | Puff-n-Stuff | food from the grocery store....wood and tools from home depot. |
| 15:29.14 | Puff-n-Stuff | other stuff from walmart. |
| 15:38.18 | jbevren | shrug |
| 15:38.25 | jbevren | it's a good program imho |
| 15:38.32 | jbevren | it remembers price, aisle, etc |
| 15:43.16 | Puff-n-Stuff | takes all the fun outta shopping. |
| 15:44.04 | *** join/#edev T0mW (n=Tom@24.238.81.205.res-cmts.sth.ptd.net) |
| 15:44.13 | prpplague | wonder how long before the enc28j60 wiki page starts getting hits from google |
| 15:44.27 | Puff-n-Stuff | dunno. |
| 15:44.59 | jbevren | heh |
| 15:45.02 | jbevren | I referred sparkfun to it |
| 15:45.17 | CosmicPenguin | from the "who-the-hell-knows-what-an-3nc28j60-is" department |
| 15:45.25 | CosmicPenguin | prpplague: submit it upstream man! |
| 15:57.09 | *** join/#edev tuxmaniac (n=aanjhan@59.92.40.137) |
| 15:59.47 | jbevren | re tux |
| 16:13.51 | CosmicPenguin | crack is bad, mkay? |
| 16:14.22 | Puff-n-Stuff | yes..agreed..pull up the pants man! |
| 16:14.34 | jbevren | (_|_)? |
| 16:14.43 | Puff-n-Stuff | bash.org anyone? |
| 16:14.53 | CosmicPenguin | I don't think so |
| 16:15.04 | CosmicPenguin | that was a sub par exchange at best |
| 16:15.05 | Puff-n-Stuff | toot late |
| 16:15.17 | Puff-n-Stuff | it takes too long to get on anyhow. |
| 16:16.11 | Puff-n-Stuff | and I always get rejected anyhow. |
| 16:17.38 | jbevren | mine too |
| 16:17.40 | jbevren | even the good ones |
| 16:17.48 | CosmicPenguin | be more funny! |
| 16:17.49 | jbevren | cupid.de/irc is another fun place |
| 16:18.01 | Puff-n-Stuff | my last post was a real good one too. |
| 16:18.01 | jbevren | thats for ircnet #c-64 only, but they do get a fair number of witty exchanges |
| 16:18.14 | CosmicPenguin | c-64ers need to be witty - thats all they have |
| 16:20.12 | CosmicPenguin | thats right - I went there |
| 16:39.20 | prpplague | CosmicPenguin: naw, decided not to submit till i have the 2.6 spi subsystem working properly |
| 17:12.25 | jbevren | mmm spi |
| 17:31.55 | *** join/#edev flybackX (i=r3z@c-67-165-88-141.hsd1.pa.comcast.net) |
| 17:33.03 | flybackX | ok guys I am really stuck here |
| 17:33.20 | flybackX | I bought a usb 2.0 to ide adaptor and so far it appears to work well |
| 17:33.47 | flybackX | however being always curious I wanted to knwo what chip is inside so I can get the pdf spec file and learn as much as I can including how to work around any issues I Might run into |
| 17:33.55 | flybackX | my problem is this |
| 17:34.10 | flybackX | according to the usb id I am getting it's only a usb 1.1 solution |
| 17:34.28 | jbevren | check /proc/bus/usb/ |
| 17:34.32 | jbevren | it will tell you its operating speed |
| 17:34.55 | flybackX | thx |
| 17:34.59 | jbevren | :D |
| 17:35.13 | jbevren | also, dmesg will probably have helpful output after you connect it |
| 17:35.24 | flybackX | oh that was the first thing I tried |
| 17:35.25 | jbevren | full speed = 12Mbit |
| 17:35.25 | flybackX | nothing |
| 17:35.28 | flybackX | I know |
| 17:35.28 | jbevren | high speed = 480 |
| 17:35.43 | flybackX | <PROTECTED> |
| 17:36.04 | flybackX | stupid windows 2000 bug too |
| 17:36.20 | flybackX | it forgets to give you the disconnect icon |
| 17:39.51 | *** join/#edev tux1800 (n=eric@c66.110.147-33.clta.globetrotter.net) |
| 18:38.33 | flybackX | http://www.inspection.gc.ca/english/corpaffr/recarapp/2005/20050509e.shtml |
| 18:56.38 | *** join/#edev prpplague (n=billybob@72.22.131.137) |
| 19:23.40 | *** join/#edev prpplague (n=billybob@72.22.131.137) |
| 19:32.58 | jbevren | wb slacker :) |
| 19:49.42 | prpplague | ho ho ho |
| 19:49.45 | prpplague | merry freakin friday |
| 19:49.49 | jbevren | heh |
| 20:29.40 | *** join/#edev FireEgl (i=Atlantic@2001:5c0:84dc:0:0:0:0:0) |
| 20:36.26 | flybackX | ugh |
| 20:36.45 | flybackX | I just spent the last 1-2 hrs hosing down a monitor with orange clean, tons of water and now a final spray down with 91% alcohol in a few mins |
| 20:36.51 | flybackX | in a sink that isn't big enough for it |
| 20:36.55 | flybackX | this better be the last time :P |
| 20:37.55 | flybackX | I should think of some way to hack a outside faucet to offer hot water so he could do all this outside and be done in 1 day instead of getting soaked and breaking his back trying to slop around in a sink laundy tub |
| 21:22.59 | MonMotha | flyback: I question the wisdom of "hosing down a monitor" |
| 21:32.41 | jbevren | ".. with alchohol spray.." |
| 21:33.56 | MonMotha | I'd wait a while before turning it on :) |
| 21:38.36 | jbevren | get some HV arc through that alchohol vapor? |
| 22:33.29 | *** join/#edev joe_bleau (n=joe_blea@adsl-65-65-38-242.dsl.fyvlar.swbell.net) |
| 23:09.11 | *** join/#edev redblue (i=star@ppp047.109-253-207.mtl.mt.videotron.ca) |
| 23:26.12 | *** join/#edev joe_bleau (n=joe_blea@adsl-69-152-202-236.dsl.fyvlar.swbell.net) |
| 23:41.39 | *** join/#edev CosmicPenguin (n=nobody@aus-ext-proxy01.amd.com) |
| 23:55.29 | *** join/#edev agaffney (n=agaffney@gentoo/developer/pdpc.active.agaffney) |