| 00:02.53 | Madsy | roxfan: ARMARM had the answer :-) |
| 00:03.25 | roxfan2 | yeah that's where i looked... |
| 00:03.36 | Madsy | Instructions with the following opcodes are undefined in the instruction space: opcode[27:25] opcode[4] = 1 The meaning of instructions in the undefined instruction space is UNDEFINED on all versions of the ARM architecture. |
| 00:03.45 | Madsy | In general, undefined instructions might be used to extend the ARM instrucion sets in the future. However, it is intended that the instructions with the following encoding will not be used for this: [cond][0111][1111][xxxx][xxxx][xxxx][1111][xxxx]. If a programmer wants to use an undefined instruction for software purposes, with a minimal risk that future hardware will treat it as a defined instruction, one of the instructions with this encodin |
| 00:05.58 | Madsy | So an instruction with an opcode-field matching a defined instruction, yet without the correct SBO/SBZ, is unpredictable. Instructions *without* a matching opcode field is undefined, and causes an exception. |
| 00:06.52 | Madsy | Which means I did a good thing by adding the SBO and SBZ field as a part of my masks. |
| 00:16.06 | prpplague | ho ho hum |
| 00:16.19 | prpplague | ds2 really bites that i didn't check the openmoko git first |
| 00:16.30 | prpplague | ds2 i just figured i had coded something incorrectly |
| 00:16.44 | ds2 | is the openmoko repo the defacto repo for the Samsung stuff? |
| 00:18.13 | prpplague | ds2 no, just one of the ones that has in the past had alot of the "undocumented" code fixes |
| 00:18.30 | ds2 | prpplague: oh |
| 00:18.35 | ds2 | have to remember that |
| 00:18.53 | *** join/#edev sunrunner20|prom (n=jamesdoe@pool-71-123-220-151.dllstx.fios.verizon.net) |
| 00:23.38 | g1powermac | alright, new zipit site: http://zipit2system.sourceforge.net/wp/ |
| 00:23.39 | prpplague | ds2 does feel good that i was able to find the bug before i knew someone else had found it |
| 00:23.53 | g1powermac | I'm still adding content, but I made it live now |
| 00:38.08 | GPSFan | g1powermac: here is a pic of where to get vtarget; http://imagebin.ca/view/3Ktey3C.html |
| 01:18.11 | g1powermac | woot, woot |
| 01:18.36 | g1powermac | got my usb floppy drive, super small soldering iron tip, and a really nice macro lens for my camcorder today |
| 01:19.52 | g1powermac | GPSFan, ahh, nice |
| 01:20.45 | Madsy | http://code.google.com/p/gp2xemu/source/diff?r=13&format=side&path=/trunk/gp2x-emu/src/opcodelist.h \o |
| 01:20.57 | Madsy | code.google.com owns Sourceforge.net any day. |
| 01:21.57 | g1powermac | hmm |
| 01:33.41 | g1powermac | GPSFan, btw, you do have access to the sf cvs repo, so you can add files to the misc module if you want |
| 01:33.52 | g1powermac | stuff like the config file for the jtag |
| 01:40.24 | g1powermac | GPSFan, just added your vtarget image |
| 01:49.50 | *** join/#edev Appleman1234 (n=Appleman@131.181.98.224) |
| 01:55.51 | *** join/#edev Tom_itx (n=Tl@ip68-102-124-72.ks.ok.cox.net) |
| 01:57.25 | g1powermac | alright, the z2 config file is up now |
| 01:59.01 | *** join/#edev ][ologramMan (n=xar@host6-136-dynamic.54-82-r.retail.telecomitalia.it) |
| 01:59.32 | ][ologramMan | Hi all, I have a question about ARM + Eclipse, anyone? |
| 02:13.32 | Tom_itx | checks for a pulse |
| 02:16.10 | Madsy | ][ologramMan: Don't ask to ask |
| 02:16.13 | Madsy | Just ask. |
| 02:17.39 | ][ologramMan | Thanks Madsy, I have a board with a FPGA and a ARM, the board is nice and I use it with Xilinx tools for the FPGA part. I would like to use it with eclipse, and so far I was able to compile and debug simple programs |
| 02:18.45 | ][ologramMan | the question is: how could I redirect the printf in a way that it will use a serial port of the ARM? |
| 02:19.34 | ][ologramMan | or if I put in another way, how could I have a "console" redirected to the serial port each time the ARM is powered on? |
| 02:20.40 | ][ologramMan | I would like to use printf, the best suggestion I got was to redefine the function int __putchar(int ch) |
| 02:23.40 | ][ologramMan | the guy that told me how he did uses Crossworks I use yagarto + OpenOCD |
| 02:32.53 | ][ologramMan | overhemed by the answers...I will try again tomorrow... |
| 02:33.05 | ][ologramMan | nite Madsy thanks again |
| 02:36.33 | *** part/#edev Tom_itx (n=Tl@ip68-102-124-72.ks.ok.cox.net) |
| 02:53.41 | *** join/#edev Appleman1234 (n=Appleman@131.181.98.224) |
| 03:28.04 | *** join/#edev Appleman1234 (n=Appleman@131.181.98.224) |
| 03:31.06 | *** join/#edev RobotGuy (n=robotguy@dsl093-038-072.pdx1.dsl.speakeasy.net) |
| 03:33.59 | RobotGuy | Beep beep |
| 04:01.01 | *** join/#edev DrZimmerman (n=theo@77-56-255-28.dclient.hispeed.ch) |
| 05:17.48 | RobotGuy | I think the problem is something to do with emerge and related modules, but have no idea how to fix it. |
| 05:36.00 | *** join/#edev lyakh (n=lyakh@p57BD2A76.dip0.t-ipconnect.de) |
| 06:01.41 | *** join/#edev mbuf (n=shakthim@61.16.248.242) |
| 06:02.13 | *** join/#edev jdav_gone (n=james@d75-157-13-250.bchsia.telus.net) |
| 06:22.32 | *** join/#edev drath_ (i=vmaster@p5B07FBB5.dip.t-dialin.net) |
| 06:48.28 | *** join/#edev [AD]Turbo (n=turbo@host250-0-dynamic.11-87-r.retail.telecomitalia.it) |
| 07:03.34 | *** join/#edev methril (n=Methril@213.27.233.98) |
| 07:04.17 | methril | morning |
| 07:08.53 | [AD]Turbo | hola |
| 07:13.05 | Madsy | [AD]Turbo \o |
| 07:13.17 | Madsy | What are you doing here? |
| 07:24.23 | *** join/#edev hw_ (n=hw@p578b3905.dip0.t-ipconnect.de) |
| 07:29.34 | [AD]Turbo | good and sane idling :) |
| 07:30.15 | methril | <[AD]Turbo> did you make the test in the TI OMAP2420 and Freescale i.MX31 processors? |
| 07:30.24 | methril | i was taking a look to your web page :) |
| 07:31.52 | [AD]Turbo | yes |
| 07:32.04 | methril | do you have sign some NDAs? |
| 07:32.41 | [AD]Turbo | for imx31 yes, for tiomap i just bought a nokia n93 :) |
| 07:33.23 | methril | oh!! nice!! |
| 07:33.43 | methril | did you take a look to the glamo chipset? |
| 07:33.57 | [AD]Turbo | no, what is it? some links pls :) |
| 07:34.18 | methril | (openmoko accelerator in the neoFreerunner open phone) |
| 07:34.54 | methril | http://www.smediatech.com/product3362.htm |
| 07:35.07 | methril | http://wiki.openmoko.org/wiki/Neo_FreeRunner_GTA02_Hardware |
| 07:35.23 | methril | the last one is for the openmoko hardware |
| 07:38.42 | [AD]Turbo | nice hw |
| 07:38.57 | [AD]Turbo | maybe arm9 instead of an arm11 is the main weak point |
| 07:42.28 | methril | well, they get the maximum of the graphic chipset |
| 07:43.17 | methril | and this gives some bad refresh times (not really god accel in video, for example) |
| 07:45.21 | [AD]Turbo | 3d chip is opengl es 1.1 CM ? |
| 07:47.02 | Madsy | [AD]Turbo: Want to help me out with my ARM emulator perhaps? ;) |
| 07:51.59 | methril | i think so, but i'm not sure |
| 07:57.28 | [AD]Turbo | Madsy, sorry i can't help you |
| 07:57.44 | [AD]Turbo | do you mean qemu? |
| 08:00.24 | *** join/#edev harpal (n=Harpal@122.169.108.195) |
| 08:01.49 | Madsy | Nope. |
| 08:02.03 | Madsy | My emulator specifically targets the GP2X handheld |
| 08:02.39 | Madsy | Here's my project page http://code.google.com/p/gp2xemu/wiki/Main |
| 08:05.01 | [AD]Turbo | sorry i can't help ypu in this case :) |
| 08:06.38 | Madsy | :\ |
| 08:06.59 | Madsy | Been coding for the last 36 hours. Time for a break. |
| 08:19.32 | methril | it's this for the pandora one too? |
| 08:19.53 | methril | looks nice |
| 08:20.08 | methril | you have to read a lot of datasheets isn't it? |
| 08:20.10 | methril | :) |
| 08:46.44 | *** join/#edev like2wise (n=likewise@84-104-101-183.cable.quicknet.nl) |
| 10:16.52 | *** join/#edev Ei5GTB_ (n=Paul@78.16.148.90) |
| 11:13.34 | *** join/#edev g1powermac_PB (n=g1powerm@unaffiliated/g1powermac) |
| 11:40.44 | *** join/#edev like2wise (n=likewise@84-104-101-183.cable.quicknet.nl) |
| 11:42.08 | g1powermac_PB | morning prpplague |
| 12:10.01 | *** join/#edev like2wise (n=likewise@84-104-101-183.cable.quicknet.nl) |
| 12:10.12 | *** join/#edev g1powermac (n=g1powerm@unaffiliated/g1powermac) |
| 12:25.20 | *** join/#edev like2wise (n=likewise@84-104-101-183.cable.quicknet.nl) |
| 12:54.13 | *** join/#edev like2wise (n=likewise@84-104-101-183.cable.quicknet.nl) |
| 13:03.43 | *** join/#edev like2wise (n=likewise@84-104-101-183.cable.quicknet.nl) |
| 13:06.17 | *** join/#edev prpplague^2 (n=dave@mail.americanmicrosystems.com) |
| 13:14.23 | prpplague | jokes with chouimat |
| 13:14.45 | prpplague | chouimat: sooo, been taking the bus alot lately? from the news, i think you might have been |
| 13:15.33 | *** join/#edev prpplague^2 (n=dave123_@ppp-70-244-161-13.dsl.rcsntx.swbell.net) |
| 13:17.03 | *** join/#edev linac (n=lin@121.41.49.13) |
| 13:22.38 | chouimat | prpplague around town yes, everyday. took the train this weekend :) |
| 13:23.12 | prpplague | chouimat: hehe, i think my joke wasn't very clear, hehe |
| 13:23.36 | chouimat | prpplague I just woke up, I have a nice day off :) |
| 13:23.58 | prpplague | chouimat: ahh |
| 13:24.13 | prpplague | chouimat: i was making a joke about the person who got their head chopped off |
| 13:25.10 | chouimat | prpplague hehehe the best part of this story is now in Winnipeg every person that look weird caring a knife are shot by the police :) |
| 13:25.35 | prpplague | hehe |
| 13:25.41 | prpplague | chouimat: i'd be dead |
| 13:32.49 | chouimat | prpplague hehe |
| 13:41.24 | *** join/#edev magnetron (n=magnetro@unaffiliated/magnetron) |
| 13:52.50 | *** join/#edev RobotGuy (n=robotguy@dsl093-038-072.pdx1.dsl.speakeasy.net) |
| 13:55.39 | *** join/#edev CosmicPenguin (n=nobody@163.181.251.103) |
| 13:55.39 | *** mode/#edev [+o CosmicPenguin] by ChanServ |
| 13:56.52 | g1powermac | morning prpplague and RobotGuy |
| 13:57.10 | RobotGuy | g1powermac: Mornin' |
| 13:57.11 | prpplague | g1powermac: greetings |
| 13:59.07 | g1powermac | doing a batch of documentation for the zipit hacking stuff |
| 13:59.18 | RobotGuy | prpplague: Mornin' |
| 13:59.33 | prpplague | RobotGuy: greetings |
| 14:01.01 | chouimat | hi RobotGuy g1powermac |
| 14:01.24 | g1powermac | heya chouimat |
| 14:01.44 | chouimat | is trying to reflash his new neo freerunner |
| 14:01.46 | RobotGuy | chouimat: Mornin' |
| 14:02.06 | RobotGuy | thinks Freerunnuner needs a redesign |
| 14:02.42 | RobotGuy | Hopefully the next version will correct the current hardware deficiencies. |
| 14:03.30 | chouimat | RobotGuy: or the software ones :) |
| 14:04.16 | RobotGuy | chouimat: There is only so much that can be fixed in software. I'd rather see it with a full speed display interface, for instance. |
| 14:04.45 | RobotGuy | I love the idea of the OpenMoko phone and continue to watch the development closely. :) |
| 14:05.02 | chouimat | RobotGuy: I'm flashing the qtopia image because it seems more stable and complete than the "2007.2 (gtk)" based one |
| 14:05.22 | RobotGuy | chouimat: I have been hearing about problems with GTK, in general. |
| 14:06.56 | RobotGuy | hopes today will NOT be a repeate of yesterday. |
| 14:07.28 | RobotGuy | Although, yesterday was not completely snafu - just real close. |
| 14:07.31 | methril | greetings RobotGuy |
| 14:07.38 | RobotGuy | methril: oy oy. :) |
| 14:07.43 | methril | :) |
| 14:08.07 | RobotGuy | methril: How goes everything? |
| 14:08.21 | methril | well, today i'm so tired |
| 14:08.46 | methril | it's warm here (not now in the offic, but it's in my appartment) |
| 14:08.50 | RobotGuy | I was out from 8:30 AM until almost dusk yesterday. |
| 14:08.53 | methril | and i can not sleep relly well |
| 14:09.09 | RobotGuy | I did not sleep well last night. |
| 14:09.23 | methril | neither do i |
| 14:09.42 | RobotGuy | Almost got hit by a lady in a car who was talking on a cell phone while turning. |
| 14:09.50 | methril | we are around 40 ÂșC |
| 14:10.06 | methril | uf!! |
| 14:10.11 | methril | i need holidays |
| 14:10.13 | methril | :) |
| 14:10.52 | RobotGuy | My chair has been majorly cranky, including all of yesterday, and almost didn't get to my doctor appointment. |
| 14:11.16 | methril | you still doesn't have the new one? |
| 14:11.51 | RobotGuy | methril: No. I can't afford even the 10% payment my insurance does not pay. Even that 10% comes to $1500.00 USD. |
| 14:12.17 | methril | you need a good project that gives you this amount of money ;) |
| 14:12.58 | RobotGuy | methril: -sigh- it is frustrating to not be able to get what I need. I always end up having to settle for less. |
| 14:13.17 | methril | happens the same with me |
| 14:13.31 | methril | i'm not so lucky to get everything |
| 14:13.41 | methril | but it could be worst (or better) |
| 14:13.42 | methril | ;) |
| 14:14.07 | RobotGuy | I just don't think the chair I would have to settle with will be able to handle the way I need to use it completely. |
| 14:16.05 | RobotGuy | What I need: http://www.pridejazzy.com/600.shtml and what I would have to settle for: http://www.pridejazzy.com/jazzyselect14xl.shtml |
| 14:17.39 | RobotGuy | I have to admit, that getting a new chair would leave open some interesting possibilities for the current chair.. |
| 14:18.44 | RobotGuy | I would be free to "experiment" with the current chair.. |
| 14:24.26 | RobotGuy | I would like to analyze the signals going from the controller to the motors. |
| 14:38.03 | RobotGuy | g1powermac: I aquired two Python books yesterday. :) |
| 14:38.14 | RobotGuy | Plus a book about making Live CDs. |
| 14:40.28 | frikker | RobotGuy: do you know python yet? |
| 14:40.55 | frikker | RobotGuy: careful. its a very dangerous language. I hope you know what you're doing :) |
| 14:41.30 | RobotGuy | frikker: I know some of Python, but not all. How is Python a dangerous language?? |
| 14:41.37 | g1powermac | well, that was interesting |
| 14:41.46 | g1powermac | I had to dremel my zipit a bit |
| 14:41.52 | CosmicPenguin | Pythons can swollow you whole, don't you know |
| 14:41.59 | RobotGuy | g1powermac: Did it survive? |
| 14:42.15 | g1powermac | I had taken it apart to take pics of my serial setup, but one of the leads kept falling off the solder points |
| 14:42.36 | g1powermac | so, I put a big blob of solder on that point to make it stick |
| 14:42.48 | frikker | RobotGuy: because it will change the way you think about the world |
| 14:42.52 | g1powermac | that then caused issues with getting it back together |
| 14:43.04 | frikker | RobotGuy: it is my savior. I wake up in cold sweats thinking about the days when I didnt know Python |
| 14:43.07 | g1powermac | so I just make a little space for the blob |
| 14:43.15 | g1powermac | everything still seems to work |
| 14:43.20 | prpplague | g1powermac: fun fun |
| 14:43.27 | frikker | RobotGuy: you wont want to touch any other language once your productivity level skyrockets 400% |
| 14:44.15 | RobotGuy | frikker: Even Python is not the be all end all of programming languages. Each programming language has its own strengths and weaknesses. |
| 14:44.24 | frikker | RobotGuy: ... and then you figure out about all the third party libraries, and then Psyco, and then Pyrex. |
| 14:44.33 | frikker | RobotGuy: oh i know, i'm just being satirical |
| 14:44.50 | frikker | RobotGuy: i do embedded programming, so i dont get to use python all the time |
| 14:45.27 | RobotGuy | frikker: I am using Python for embedded systems programming. |
| 14:45.27 | frikker | RobotGuy: but when i write simulations for school projects, it feels great to get done in an afternoon rather than a couple days |
| 14:45.48 | frikker | RobotGuy: I have before, right now we're not |
| 14:46.04 | frikker | RobotGuy: what kind of applications? high level (gui) or lower level stuff? |
| 14:46.22 | RobotGuy | frikker: Software for my robot. :) |
| 14:47.01 | RobotGuy | frikker: I have a #WALTER channel if you would like to discuss this further. |
| 15:07.07 | RobotGuy | I won't be going far in my chair anymore - it shut down more than 50 times on the way into Portland yesterday and at least that many times on the way back. |
| 15:11.29 | g1powermac | alright, serial port stuff is now fully documented: http://zipit2system.sourceforge.net/wp/?page_id=82 |
| 15:18.46 | RobotGuy | Cool |
| 15:35.28 | *** join/#edev like2wise (n=likewise@84-104-101-183.cable.quicknet.nl) |
| 15:39.16 | *** join/#edev MothaWork (n=monmotha@mail.forwardengineering.com) |
| 16:08.34 | *** join/#edev ccjoe (n=joeg@75-169-39-184.slkc.qwest.net) [NETSPLIT VICTIM] |
| 16:08.34 | *** join/#edev cbrake (n=cbrake@oh-69-34-21-229.sta.embarqhsd.net) [NETSPLIT VICTIM] |
| 16:08.34 | *** join/#edev solar (n=solar@smtp.gentoo.org) [NETSPLIT VICTIM] |
| 16:08.36 | *** join/#edev RobotGuy-Out (n=robotguy@dsl093-038-072.pdx1.dsl.speakeasy.net) |
| 16:08.36 | *** join/#edev methril|away (n=Methril@213.27.233.98) [NETSPLIT VICTIM] |
| 16:08.37 | *** join/#edev agaffney (n=agaffney@gentoo/developer/pdpc.active.agaffney) [NETSPLIT VICTIM] |
| 16:08.37 | *** join/#edev Crofton (n=balister@66-207-66-26.black.dmt.ntelos.net) |
| 16:09.30 | *** join/#edev MothaWork (n=monmotha@mail.forwardengineering.com) [NETSPLIT VICTIM] |
| 16:09.30 | *** join/#edev like2wise (n=likewise@84-104-101-183.cable.quicknet.nl) |
| 16:09.30 | *** join/#edev lyakh (n=lyakh@p57BD2A76.dip0.t-ipconnect.de) |
| 16:09.30 | *** join/#edev frikker (n=blaine@107.135.68.216.DED-DSL.fuse.net) |
| 16:09.30 | *** join/#edev Madsy (n=madman@ti500710a342-0991.bb.online.no) [NETSPLIT VICTIM] |
| 16:09.30 | *** join/#edev samuelr (n=samuelr@dsl093-061-094.pit1.dsl.speakeasy.net) [NETSPLIT VICTIM] |
| 16:09.31 | *** join/#edev gandhijee (i=akp@host-66-202-34-165.spr.choiceone.net) [NETSPLIT VICTIM] |
| 16:09.31 | *** join/#edev wmat (n=btraynor@gromit.mixdown.ca) |
| 16:09.43 | *** join/#edev g1powermac (n=g1powerm@unaffiliated/g1powermac) [NETSPLIT VICTIM] |
| 16:11.01 | *** join/#edev hw_ (n=hw@p578b3905.dip0.t-ipconnect.de) [NETSPLIT VICTIM] |
| 16:11.01 | *** join/#edev file (n=file@asterisk/developer-and-muffin-lover/file) |
| 16:11.01 | *** join/#edev kergoth (n=kergoth@neutrino.joshua-colp.com) [NETSPLIT VICTIM] |
| 16:11.01 | *** join/#edev rsc2 (n=rsc@83.236.181.13) [NETSPLIT VICTIM] |
| 16:11.54 | *** join/#edev CosmicPenguin (n=nobody@163.181.251.103) |
| 16:11.54 | *** join/#edev ohsix (i=ohsix@66.220.111.222) |
| 16:11.54 | *** join/#edev Jx_ (i=Jx_@81.180.252.139) |
| 16:11.54 | *** join/#edev drath (i=vmaster@p5B07FBB5.dip.t-dialin.net) |
| 16:11.55 | *** join/#edev linac (n=lin@121.41.49.13) |
| 16:11.55 | *** join/#edev ejdav_gon (n=james@d75-157-13-250.bchsia.telus.net) |
| 16:11.56 | *** join/#edev prpplague^2 (n=dave123_@ppp-70-244-161-13.dsl.rcsntx.swbell.net) |
| 16:11.56 | *** join/#edev prpplague (n=dave@mail.americanmicrosystems.com) |
| 16:11.56 | *** join/#edev [AD]Turbo (n=turbo@host250-0-dynamic.11-87-r.retail.telecomitalia.it) [NETSPLIT VICTIM] |
| 16:11.56 | *** join/#edev ce_geek (n=ce_geek@c-66-31-5-98.hsd1.nh.comcast.net) |
| 16:11.56 | *** join/#edev dfarnsworth (n=dfarnswo@65.200.49.156) [NETSPLIT VICTIM] |
| 16:11.56 | *** join/#edev ChanServ (ChanServ@services.) |
| 16:11.56 | *** mode/#edev [+oo CosmicPenguin ChanServ] by irc.freenode.net |
| 16:11.57 | *** join/#edev CP|home (n=nobody@www.crouse-house.com) |
| 16:11.57 | *** join/#edev visitors (n=pulstar@198-tar-2.acn.waw.pl) |
| 16:11.57 | *** join/#edev Mirell (n=mirell@static-71-162-243-5.phlapa.fios.verizon.net) |
| 16:11.57 | *** join/#edev _trine (n=trine@38.100.90.3) [NETSPLIT VICTIM] |
| 16:11.57 | *** join/#edev g1powermac_PB (n=g1powerm@unaffiliated/g1powermac) [NETSPLIT VICTIM] |
| 16:11.57 | *** join/#edev ds2 (i=noinf@netblock-66-245-251-24.dslextreme.com) [NETSPLIT VICTIM] |
| 16:11.57 | *** join/#edev Redhatter (n=vk4fsjl@gentoo/developer/redhatter) |
| 16:11.57 | *** join/#edev roxfan2 (n=dunno@216.8-200-80.adsl-dyn.isp.belgacom.be) [NETSPLIT VICTIM] |
| 16:11.57 | *** join/#edev magnetron (n=magnetro@unaffiliated/magnetron) [NETSPLIT VICTIM] |
| 16:11.57 | *** join/#edev EI5GTB (n=Paul@78.16.148.90) [NETSPLIT VICTIM] |
| 16:11.57 | *** join/#edev DrZimmerman (n=theo@77-56-255-28.dclient.hispeed.ch) |
| 16:11.57 | *** join/#edev chouimat (n=dieu@kde/developer/chouinard) |
| 16:11.57 | *** join/#edev xzcvczx (n=simon@gentoo/user/xzcvczx) [NETSPLIT VICTIM] |
| 16:11.57 | *** join/#edev Sascha (n=sisawess@cssun.rrze.uni-erlangen.de) |
| 16:11.57 | *** join/#edev mpk (i=mp@solute.xen-host.de) [NETSPLIT VICTIM] |
| 16:12.50 | *** join/#edev cbrake_ (n=cbrake@oh-69-34-21-229.sta.embarqhsd.net) |
| 16:12.50 | *** join/#edev menomc (n=amery@yoda.expert-erp.net) |
| 16:12.52 | MothaWork | frikker: netsplit |
| 16:12.52 | MothaWork | welcome to Freenode |
| 16:14.40 | prpplague | ho ho hum |
| 16:14.40 | prpplague | still no sound |
| 16:14.52 | prpplague | wonders what is wrong now |
| 16:15.59 | chouimat | BOOO |
| 16:16.28 | prpplague | hehe |
| 16:19.29 | solar | prpplague: think 2 x 4.2V@130~150mA should be enough solar cells to power/recharge the nail? |
| 16:20.08 | prpplague | solar: depends on what is powered up at the time |
| 16:20.12 | prpplague | solar: generally yea |
| 16:21.45 | prpplague | ho ho hum |
| 16:21.46 | solar | assuming standalone. Maybe tie a PIR sensor |
| 16:21.57 | prpplague | isn't sure where to look now for this audio issue |
| 16:22.02 | prpplague | PIR? |
| 16:22.18 | solar | Passive Infra Red |
| 16:22.22 | prpplague | ahh |
| 16:22.40 | prpplague | solar: should be about right then |
| 16:24.42 | solar | http://tinyurl.com/5dd9vj (was cheap) |
| 16:25.55 | prpplague | ahh cute |
| 16:31.33 | g1powermac | btw, here's what my zipit looks like now: http://zipit2system.sourceforge.net/images/zipitnewboard.jpg |
| 16:31.49 | g1powermac | not the best of shots, but still pretty good coming from a cheap end camcorder |
| 16:33.57 | solar | g1powermac_PB: those z2 devices are in the sub $50 market? |
| 16:36.44 | prpplague | solar: yea |
| 16:38.32 | g1powermac | now they are. yes |
| 16:39.07 | *** join/#edev sunrunner20 (n=jamesdoe@pool-71-123-220-151.dllstx.fios.verizon.net) |
| 16:44.04 | *** join/#edev T0mW (n=Tom@host-66-202-71-238.har.choiceone.net) |
| 16:53.07 | prpplague | bangs head on desk |
| 16:53.18 | prpplague | can't seem to get this audio codec to do anything |
| 17:15.18 | wmat | prpplague: do you find the forced capitalization of uploaded file names as annoying as I do in mediawiki? |
| 17:15.30 | prpplague | wmat: absolutely |
| 17:16.07 | wmat | I can turn it off, but the switch makes the whole namespace case-sensitive |
| 17:17.05 | wmat | that sounds a little scary at this point |
| 17:19.35 | prpplague | yea it should have been done early on since the pages were already done case-sensitive before the switch |
| 17:20.08 | *** join/#edev kergoth`work (n=clarson@65.200.49.156) |
| 17:21.12 | kergoth`work | ah ha, thats why my automount wasnt working... gnome-volume-manager had it disabled so nautilus could do it, but i'm not using nautilus.. |
| 17:21.13 | kergoth`work | heh |
| 17:25.40 | prpplague | i must be totally missing something, this driver looks incomplete |
| 17:25.49 | prpplague | it doesn't even seem to set power on registers |
| 17:32.21 | *** join/#edev RobotGuy (n=robotguy@dsl093-038-072.pdx1.dsl.speakeasy.net) |
| 17:34.27 | *** join/#edev linac (n=lin@121.41.49.13) |
| 17:35.01 | RobotGuy | did not authorize a netsplit while he was gone. :) |
| 17:35.32 | RobotGuy | Hmmmm, I might still be gone. |
| 17:48.22 | g1powermac | RobotGuy, nope, you're here, now mentally. . .its another story. . . |
| 17:48.24 | g1powermac | ducks ;-) |
| 17:48.47 | RobotGuy | g1powermac: Hmmmmm, facinating.. |
| 17:49.05 | g1powermac | just playin with ya :-) |
| 17:49.07 | RobotGuy | sends W.A.L.T.E.R. to have a "discussion" with g1powermac.. :) |
| 17:49.25 | RobotGuy | :p |
| 17:49.57 | RobotGuy | Today is going MUCH better than yesterday. |
| 17:51.37 | prpplague | CosmicPenguin: this audio codec stuff is driving me nutter than normal |
| 17:52.54 | CosmicPenguin | Thats a bold statement |
| 17:53.21 | prpplague | CosmicPenguin: indeed |
| 17:54.15 | RobotGuy | prpplague: Wow, sounds pretty serious to me. ;P |
| 17:54.28 | RobotGuy | grins and runs |
| 17:54.52 | prpplague | CosmicPenguin: seems like there is a mapping that is incorrect |
| 17:54.53 | RobotGuy | hides behind W.A.L.T.E.R. |
| 17:55.12 | prpplague | CosmicPenguin: the driver mapping has one turn on the DAC, but it doesn't seemed to be mapped to the mixer properly |
| 17:55.41 | RobotGuy | was just kidding, really, he thinks.. :D |
| 17:56.46 | CosmicPenguin | prpplague: I didn't grok that |
| 17:57.25 | RobotGuy | doesn't grok people lately. |
| 17:57.53 | prpplague | CosmicPenguin: the codec driver has a mapping turn on the power to the DAC, the SoC driver is suppose to map that to the mixer, but isn't |
| 17:57.58 | RobotGuy | I should get another copy of that book. It was really, umm, interesting. |
| 17:58.14 | RobotGuy | prpplague: What is the codec for? |
| 17:58.29 | prpplague | RobotGuy: the m8050 |
| 17:58.39 | RobotGuy | Ahh, AML stuff. |
| 17:59.22 | RobotGuy | Is there a good source to learn about display drivers for embedded stuff? |
| 17:59.59 | RobotGuy | wishes he could farm some of the stuff he needs to do out. |
| 18:00.20 | kergoth`work | http://consumerist.com/5032351/demystify-car-repair-prices-with-repairpalcom |
| 18:00.27 | prpplague | RobotGuy: what else would it be for? |
| 18:00.50 | RobotGuy | prpplague: Sorry, I was just curious. |
| 18:01.46 | prpplague | RobotGuy: np, just surprised that you'd think it was for any other that who pays me |
| 18:02.20 | RobotGuy | I'm going to go see what other software I can break. Bye. |
| 18:04.33 | *** join/#edev bbradley (n=bbradley@78-105-167-16.zone3.bethere.co.uk) |
| 18:05.16 | g1powermac | hehe, I got a 4gb hdd running on my mac classic II :-) |
| 18:24.02 | prpplague | definetly something broken |
| 18:31.44 | *** join/#edev like2wise (n=likewise@84-104-101-183.cable.quicknet.nl) |
| 18:44.06 | prpplague | CosmicPenguin: problem is the wolfson folks are in the UK, and only available for help untill around 11am cst |
| 18:46.41 | prpplague | solar: boss just called from LWE |
| 18:46.54 | prpplague | solar: you made it to the tincantools booth yet? |
| 18:49.26 | solar | prpplague: nope. I'm heading up tmw. |
| 18:50.01 | solar | probably ~10 others have all planned to be there then |
| 18:50.14 | prpplague | solar: ahh |
| 18:50.32 | solar | who is there from tct? |
| 18:50.42 | solar | The rusty guy? |
| 18:51.36 | prpplague | solar: yea, Rusty Herod , he is the owner of AML and TinCanTools |
| 18:51.53 | prpplague | solar: *cough* be sure and tell him in a freakin coding god |
| 18:51.58 | prpplague | hehehe |
| 18:52.08 | prpplague | jokes with solar |
| 19:21.02 | solar | s/in/I'm/ ? |
| 19:23.15 | prpplague | solar: yea |
| 19:23.18 | prpplague | long day |
| 19:58.47 | *** join/#edev mne (n=mne@85.127.60.181) |
| 19:58.50 | mne | hi, I'm trying to use openocd with a at91sam9260 based board. Unfortunately, openocd fails with the error "Error validating JTAG scan chain, IR mismatch, ...". Are you guys familiar with openocd ? |
| 20:00.00 | prpplague | mne: that usually mean the device isn't powered on, or that the jtag interface was not connected to the device properly |
| 20:00.55 | MothaWork | mne: we just discovered that, at least on our 9263 board, if there are any other devices on the scan chain, ICE won't work |
| 20:01.33 | MothaWork | don't know if that's an OpenOCD issue, a particular to our board, an issue with the 9263 (and the 9260 would likely be the same), or if ARM ICE just doesn't work with other stuff on the scan chain |
| 20:01.40 | MothaWork | fortunately, our board lets us isolate just the uC |
| 20:02.19 | mne | hmm, the device is turned on. I'm using the Olimex OpenOCD JTAG dongle. On the board there is a jtag socket so which I connected the JTAG connector. I also looked if there are any special jumpers I need to set but found none. The JTAG dongle seems to sucessfully reset and halt the cpu. However, after that it still exits with the mentioned error |
| 20:02.45 | MothaWork | is the uC the only thing on the scan chain? |
| 20:02.56 | mne | AFAICS the at91sam9260 is the only device in the jtag chain |
| 20:03.13 | mne | The board is an Olimex at91sam9260 evaluation board. |
| 20:03.58 | mne | this is the board: http://www.olimex.com/dev/sam9-L9260.html |
| 20:04.15 | mne | And the schematic: http://www.olimex.com/dev/images/ARM/ATMEL/SAM9-L9260-REV-B-sch.gif |
| 20:06.18 | mne | Just to make it more clean, here's the full (debug) output of openocd: http://rafb.net/p/kuaMmQ98.html |
| 20:06.39 | mne | To me it looks like openocd can successfully talk to the jtag dongle, right ? |
| 20:08.07 | mne | arm926ejs should also be the correct core variant for the sam9260 I guess |
| 20:32.51 | prpplague | boy is the #alsa-soc channel unfriendly |
| 20:35.40 | chouimat|away | beer time :) |
| 20:36.48 | wmat | mne: did you check that forum I pointed you at? |
| 20:38.45 | mne | forum ? Did you send a link ? I didn't get anything |
| 20:39.08 | wmat | I posted it in the #elinux channel |
| 20:39.48 | mne | nope, nothing there. can you post it again in this channel ? |
| 20:42.03 | wmat | mne: http://forum.sparkfun.com/viewforum.php?f=18 |
| 20:42.11 | mne | thanks |
| 20:42.14 | wmat | np |
| 20:48.49 | *** join/#edev ][ologramMan (n=giuseppe@host6-136-dynamic.54-82-r.retail.telecomitalia.it) |
| 20:50.45 | ][ologramMan | Hi all, I would like to know how to redirect printf to a serial port with a LPC2138 board? |
| 20:56.20 | prpplague | ][ologramMan: we generally discus using linux on devices here |
| 20:56.28 | prpplague | ][ologramMan: might check on ##microcontrollers |
| 20:59.07 | ][ologramMan | sorry, I was thinking it was ARM related anyway, too tiny to run linux on it |
| 20:59.34 | ][ologramMan | even if I guess issomething gcc related so... |
| 21:01.00 | ][ologramMan | thanks anyway, I will bug others in microcontrollers |
| 21:04.53 | g1powermac | prpplague, unfortunately we don't have many arm experts in ##microcontrollers |
| 21:17.49 | mne | Hmm, the error message is exactly the same if i completely disconnect the jtag dongle from the board. I'll now try to resolder the JTAG connector. I just saw a solder junction that might be bad. |
| 21:45.48 | *** join/#edev like2wise (n=likewise@82-171-51-231.ip.telfort.nl) |
| 21:47.49 | *** join/#edev CosmicPe1guin (n=nobody@163.181.251.103) |
| 21:48.24 | *** mode/#edev [+o CosmicPenguin] by ChanServ |
| 22:18.16 | *** join/#edev mpare (n=mpare@drupal.org/user/72507/view) |
| 22:26.32 | *** join/#edev dijenerate (n=dijenera@69.73.223.106) |
| 22:27.42 | *** join/#edev ChanServ (ChanServ@services.) |
| 22:27.42 | *** mode/#edev [+o ChanServ] by irc.freenode.net |
| 22:38.23 | *** join/#edev ChanServ (ChanServ@services.) |
| 22:38.23 | *** mode/#edev [+o ChanServ] by irc.freenode.net |
| 22:44.01 | *** join/#edev GPSFan (n=kenm@12.10.255.246) |
| 22:44.01 | *** mode/#edev [+o GPSFan] by ChanServ |
