| 00:05.56 | *** join/#edev MonMotha (n=monmotha@pool-71-127-113-22.aubnin.fios.verizon.net) |
| 00:22.43 | landley | What's an Arduino and proto shield kit? |
| 00:23.21 | landley | ponders inflicting Kubuntu 8.04 on his laptop. |
| 00:23.45 | landley | But do I go with the "long term support for old stuff" version or the "community support only, but it may actually fix the bugs you've been seeing" version? |
| 00:24.27 | RobotGuy | landley: Arduino is an AVR based open source platform. |
| 00:25.07 | RobotGuy | Do you need support for the "old stuff" ? |
| 00:25.12 | landley | What's an AVR again? |
| 00:25.17 | landley | I think I knew at one point, but I forgot... |
| 00:25.27 | RobotGuy | Atmel's answer to Microchip's PICs. |
| 00:25.33 | landley | RobotGuy: there's a Kubuntu 8.04 with KDE3, and a Kubuntu 8.04 "remix" with kde4. |
| 00:25.52 | landley | I've hit bugs in just about everything. Konquer, Kmail, Klipper... |
| 00:26.12 | landley | Never built KDE from source (it's a pain), so I've never tried to track down and fix any of 'em... |
| 00:26.13 | RobotGuy | I would stay away from the remix. I tried it, and even though it does look nice, a lot of the KDE apps are not ported to the new KDE4 yet. |
| 00:26.46 | landley | ok |
| 00:27.05 | landley | That's plenty of a tiebreaker for me. |
| 00:28.11 | RobotGuy | Even KMail wasn't ported when I tried KDE4, which surprised me. |
| 00:38.37 | RobotGuy | I'm sticking with KDE3 for awhile. |
| 01:14.39 | *** join/#edev samuelr (n=samuelr@dsl093-061-094.pit1.dsl.speakeasy.net) |
| 01:19.13 | *** join/#edev RobotGuy (n=robotguy@dsl093-038-070.pdx1.dsl.speakeasy.net) |
| 01:41.44 | *** join/#edev SowWn (n=sowwn@68-189-241-60.dhcp.oxfr.ma.charter.com) |
| 01:41.54 | *** part/#edev SowWn (n=sowwn@68-189-241-60.dhcp.oxfr.ma.charter.com) |
| 04:02.45 | *** join/#edev DrZimmerman (n=theo@84-72-44-60.dclient.hispeed.ch) |
| 04:39.40 | *** join/#edev RobotGuy (n=robotguy@dsl093-038-070.pdx1.dsl.speakeasy.net) |
| 05:40.09 | *** join/#edev lyakh (n=lyakh@p57BD257E.dip0.t-ipconnect.de) |
| 06:24.24 | *** join/#edev drath_ (i=vmaster@p5B07F5EB.dip.t-dialin.net) |
| 06:36.13 | *** join/#edev methril (n=Methril@213.27.233.98) |
| 06:42.29 | *** join/#edev mbuf (n=shakthim@61.16.248.242) |
| 06:48.34 | methril | morning |
| 06:53.37 | *** join/#edev [AD]Turbo (n=turbo@host250-0-dynamic.11-87-r.retail.telecomitalia.it) |
| 06:54.54 | [AD]Turbo | yo all |
| 07:41.24 | *** join/#edev harpal (n=Harpal@122.169.108.195) |
| 10:11.53 | *** join/#edev hw (n=hw@p578b3905.dip0.t-ipconnect.de) |
| 10:17.12 | *** join/#edev Ei5GTB_ (n=Paul@194.125.117.39) |
| 11:10.19 | *** join/#edev g1powermac (n=g1powerm@unaffiliated/g1powermac) |
| 11:10.54 | *** join/#edev mne (n=mne@85-127-234-102.dynamic.xdsl-line.inode.at) |
| 11:14.26 | mne | Hi. I was wondering how I can write to the internal flash (boot) memory of my at91sam9260 with openocd. As far as I understand, I have to define a flash region first using something like "flash bank cfi 0x0 0x100000 2 2 0". Writing to that region should then be possible with something like "load_image imagefile 0x00 <length>". Is that correct ? It doesn't seems to work. At least I can't probe the configured memory bank. Is the "cfi" dri |
| 11:14.27 | mne | ver the correct one for the at91sam9260 internal flash ?? |
| 11:15.58 | *** join/#edev g1powermac_PB (n=g1powerm@unaffiliated/g1powermac) |
| 12:02.37 | *** join/#edev chouimat (n=dieu@kde/developer/chouinard) |
| 12:55.56 | *** join/#edev linac (n=lin@121.41.49.13) |
| 13:12.15 | *** join/#edev GPSFan (n=kenm@12.10.255.246) |
| 13:12.15 | *** mode/#edev [+o GPSFan] by ChanServ |
| 13:12.27 | *** join/#edev frikker (n=blaine@107.135.68.216.DED-DSL.fuse.net) |
| 13:40.13 | *** join/#edev prpplague (n=dave@mail.americanmicrosystems.com) |
| 13:47.40 | *** join/#edev chouimat|work (n=dieu@kde/developer/chouinard) |
| 14:08.00 | g1powermac_PB | morning prpplague |
| 14:14.50 | *** join/#edev RobotGuy (n=robotguy@dsl093-038-070.pdx1.dsl.speakeasy.net) |
| 14:15.41 | prpplague | greetings earthlings |
| 14:15.56 | RobotGuy | Beep beep |
| 14:16.02 | RobotGuy | looks around for the earthlings. |
| 14:16.04 | RobotGuy | sets power on stun. :) |
| 14:16.21 | RobotGuy | grins |
| 14:17.00 | RobotGuy | prpplague: Do you have a tracking number for my displays? |
| 14:17.12 | RobotGuy | And G'Morning too. :) |
| 14:17.47 | RobotGuy | Finally got the week turned around to be better. :) Monday up to Wednesday morning were awful! |
| 14:17.48 | prpplague | RobotGuy: not at the momment, i'll get it for you, i sent them UPS ground |
| 14:17.55 | RobotGuy | Oh, OK. |
| 14:19.25 | RobotGuy | I decided I want to get the Jazzy 600 chair to replace this current piece of junk I have to use now. I have no idea at present how I am going to pay for the remaining 10% though. |
| 14:20.01 | RobotGuy | There is no way this chair was designed for all around use, but the Jazzy definitely is. |
| 14:21.12 | RobotGuy | I saw an inexpensive (around $60.00) controller board at the July PARTs meeting that would handle the motors in my current chair.. :D:D |
| 14:22.25 | RobotGuy | Maybe it will eventually become a HammerChair[tm].. :D |
| 14:28.58 | RobotGuy | I need to open up my main PC and make sure all the cables are seated properly. That could cause disk problems if the cables are loose, and I have not checked them for a very long time. |
| 14:33.44 | *** join/#edev CosmicPenguin (n=nobody@163.181.251.103) |
| 14:33.45 | *** mode/#edev [+o CosmicPenguin] by ChanServ |
| 14:34.15 | RobotGuy | puts on his penquin protective gear. :) |
| 14:34.20 | RobotGuy | G'Morning CosmicPenguin |
| 14:36.35 | g1powermac | gets out his EMP gun. . . |
| 14:46.50 | *** join/#edev Zagrophyte (n=TRosenba@74.7.129.242) |
| 14:48.40 | prpplague | Zagrophyte: greetings |
| 14:48.54 | RobotGuy | Zagrophyte: Hello |
| 14:49.01 | prpplague | Zagrophyte: RobotGuy is planning to do some hammer based robotics |
| 14:49.07 | Zagrophyte | hey |
| 14:49.14 | Zagrophyte | cool |
| 14:49.21 | prpplague | Zagrophyte: he's been working on the specs for the RDP(robotics development platform) |
| 14:49.30 | Zagrophyte | now does hammer run an OS, or is it program driven |
| 14:49.39 | RobotGuy | Yes, indeed I am! I finally got the rest of the interface components and brackets I need to complete assembly of W.A.L.T.E.R. 2.0. :) |
| 14:49.53 | RobotGuy | Hammer runs full Linux with kernel 2.x.* |
| 14:49.57 | RobotGuy | 2.6.* |
| 14:49.59 | Zagrophyte | wow |
| 14:50.30 | Zagrophyte | I just want an easy cheap linux chipset for my robot, looks like the beagle has a ways to go before stable |
| 14:50.37 | RobotGuy | 32 MB RAM, 16 MB Flash, 200 MHz Samsung S3C2410A ARM9 processor in a 40 pin standard DIP. |
| 14:50.54 | CosmicPenguin | it also cleans your teeth while you sleep |
| 14:50.56 | Zagrophyte | cool, power requirements? |
| 14:51.13 | g1powermac | and dishes too |
| 14:51.33 | RobotGuy | I am now able to modify my hammer carrier board for battery operation too. :) |
| 14:52.02 | prpplague | Zagrophyte: base runs about 120mA |
| 14:52.08 | RobotGuy | All of what I do will find its way onto the Hammer Wiki (http:/www.elinux.org/Hammer_Board) |
| 14:52.25 | Zagrophyte | nice |
| 14:52.46 | RobotGuy | Zagrophyte: There is also a Hammer-RDP (Robotics Development Platform) carrier board for Hammer in development now. |
| 14:52.49 | prpplague | RobotGuy: just a note, when you do urls in a post, make sure you have spaces before and after so the irc client can read it and make it "clickable" |
| 14:53.01 | RobotGuy | prpplague: Yeah, I forgot about that. |
| 14:53.41 | RobotGuy | I also forgot the second / in my excitement. |
| 14:53.42 | Zagrophyte | RobotGuy: Nice, any idea what the cost will be? |
| 14:53.49 | prpplague | Zagrophyte: hammer has full jtag support and can be run either from flash or sdram |
| 14:53.58 | Zagrophyte | http:/www.elinux.org/Hammer_Board |
| 14:54.08 | prpplague | Zagrophyte: http://www.tincantools.com |
| 14:54.08 | Zagrophyte | weird, still not linkified |
| 14:54.13 | RobotGuy | Zagrophyte: I do not know at present. I don't work for TinCanTools, but have been helping with the development of the Hammer-RDP. |
| 14:54.29 | prpplague | Zagrophyte: a complete hammer kit is something like $239USD |
| 14:54.37 | RobotGuy | http://www.elinux,org/Hammer_Board |
| 14:54.40 | prpplague | Zagrophyte: my guess is the RDP will be about $49 |
| 14:54.48 | RobotGuy | You have to have the full proper URL. |
| 14:55.04 | prpplague | RobotGuy: without the comma of course, hehe |
| 14:55.26 | RobotGuy | Dang, this keyboard doesn't understand URLs very well. ;) |
| 14:55.36 | prpplague | Zagrophyte: http://www.elinux.org/Hammer_Board |
| 14:55.56 | prpplague | "how many #edev channel members does it take to post a single url?" |
| 14:56.12 | CosmicPenguin | We're not a bright crowd |
| 14:57.36 | RobotGuy | Well, maybe CosmicPenguin isn't the brightest bulb here.. Hee hee |
| 14:57.40 | RobotGuy | ducks and runs |
| 14:57.57 | CosmicPenguin | clearly not |
| 14:58.25 | RobotGuy | prpplague: Hmmm, let me see, it must take at least 3 |
| 15:00.34 | RobotGuy | Zagrophyte: I and others have Hammer running completely self contained from flash. |
| 15:02.49 | Zagrophyte | awesome |
| 15:03.31 | RobotGuy | Zagrophyte: I even have Python, DJango, Phenny (IRC bot), which are all Python based, on my Hammer. |
| 15:04.18 | Zagrophyte | what language do you program in? |
| 15:04.20 | prpplague | RobotGuy: CosmicPenguin isn't a bulb, he's a blue LED |
| 15:04.27 | RobotGuy | I have to figure out how to pair down my software on flash though, to just what I absolutely need to do what I want to do with W.A.L.T.E.R. |
| 15:04.28 | CosmicPenguin | a very dim blue led |
| 15:04.36 | CosmicPenguin | connnected to an unreliable power supply |
| 15:04.40 | prpplague | hehe |
| 15:04.49 | RobotGuy | prpplague: Oh yeah, I forgot about him being an LED.. Maybe he is a BlinkM LED! |
| 15:05.02 | Zagrophyte | my robot is named Ping, after the PING))) ultrasonic sensor he uses to see |
| 15:05.20 | RobotGuy | Zagrophyte: I use PINGs on W.A.L.T.E.R. also. |
| 15:05.40 | RobotGuy | It's a very easy ultrasonic sensor to use and write code for. |
| 15:05.58 | Zagrophyte | http://www.youtube.com/watch?v=H5NsdY1xMMk early "sight" test |
| 15:06.04 | Zagrophyte | it is, I love it |
| 15:06.24 | RobotGuy | I also just got an Arduino with Proto Shield kit that I hope I can get working as a sub controller for Hammer. |
| 15:06.59 | Zagrophyte | I also have serial-controlled Pololu 8-channel servo controller, and a BlueSmiRF bluetooth serial modem, and a pulse-controlled stepper motor |
| 15:07.16 | Zagrophyte | RobotGuy: Ping uses arduino, great platform |
| 15:07.37 | Zagrophyte | the proto shield kit is great, I got a breadboard to stick on top of it |
| 15:07.37 | RobotGuy | I have a serial bluetooth module I am connecting to the console port of Hammer. |
| 15:07.54 | RobotGuy | I should have ordered the little breadboard too. |
| 15:08.16 | CosmicPenguin | RobotGuy: where did you order from? |
| 15:08.24 | Zagrophyte | sparkfun? |
| 15:08.35 | RobotGuy | I have this idea of putting the Arduino on a pan/tilt platform, connecting everything to Hammer. |
| 15:08.40 | Zagrophyte | http://www.sparkfun.com is where I got mine |
| 15:09.00 | RobotGuy | CosmicPenguin: I got mine from Spark Fun because I also wanted the BlinkM LEDs and another JTAG unit. |
| 15:09.21 | Zagrophyte | can you do USB programming, or is JTAG the only way? |
| 15:09.29 | RobotGuy | Otherwise I would have ordered my Arduino from Trossen Robotics. |
| 15:09.47 | RobotGuy | Zagrophyte: What do you mean by USB programming? Boot loading? |
| 15:09.49 | prpplague | CosmicPenguin: the folks who using the arduino seem to have a lot of trouble programmer under an OS like on the hammer |
| 15:09.55 | Zagrophyte | RobotGuy: yeah |
| 15:10.15 | Zagrophyte | I guess I haven't graduated to debug-mode programming yet |
| 15:10.18 | CosmicPenguin | prpplague: I think thats an agenda, mainly |
| 15:10.32 | RobotGuy | prpplague: It may have to do with the way Arduino uses the USB interface, and I will be finding out soon |
| 15:10.38 | prpplague | Zagrophyte: the usb host and slave can be used for networking the device, and in additional you can use the serial power for a console |
| 15:11.22 | prpplague | CosmicPenguin: well from what i gather, alot of the folks have trouble understanding the hardware seperation for the OS |
| 15:11.31 | CosmicPenguin | trouble or refusal? |
| 15:11.33 | prpplague | CosmicPenguin: they are so used to toggling a gpio directly |
| 15:11.45 | CosmicPenguin | Like I said, I think there is a lot of personal grudges in there |
| 15:11.50 | Zagrophyte | not refusal, arduino just makes it so darn simple |
| 15:11.56 | Zagrophyte | I'm really excited about a real OS |
| 15:12.04 | CosmicPenguin | And a good smattering of not being able to apply the right tool to the right job |
| 15:12.11 | prpplague | CosmicPenguin: from my personal feedback its always been that they just don't understand the seperation |
| 15:12.21 | Zagrophyte | I'm a fulltime C# programmer as well, so I can understand it from a systems perspective |
| 15:13.55 | Zagrophyte | I run linux at home, but don't develop in it, that's the learning curve I will have to overcome first |
| 15:14.45 | RobotGuy | prpplague: There are several Arduino compatible (but not yet certified) boards available now, including the DorkBoard and several from SFE. |
| 15:17.26 | prpplague | RobotGuy: yea |
| 15:20.37 | RobotGuy | The DorkBoard is as small as you will likely see that uses the DIP of the Atmega168. |
| 15:25.48 | RobotGuy | prpplague: I might rename the Hammer version of openocd to hammer-ocd and have it work with buildroot. I hadn't thought of that easy solution the other day. |
| 15:26.38 | solar | whats the propblem with using openocd with buildroot? |
| 15:27.24 | RobotGuy | solar: It's just a version thing, I think. I can't get the Gentoo version to work with the officially supported Hammer Buildroot stuff. |
| 15:28.14 | RobotGuy | I'm going to probably have to completely rebuild my Gentoo setup on my main PC though. :( Some sort of hard drive problem is eating files. |
| 15:28.44 | solar | RobotGuy: of course not. The openocd off the CD uses commands that are obsolete. The gentoo one is really just a svn/cvs/git pull from the given day you merged it. |
| 15:29.11 | RobotGuy | solar: Ah, OK. |
| 15:29.29 | prpplague | RobotGuy: which is what i had told you as well |
| 15:30.15 | RobotGuy | I knew there was some sort of command difference between the versions. I just wasn't figuring out what needed to be changed. |
| 15:30.42 | RobotGuy | That's what I needed help with, but probably didn't communicate it properly. |
| 15:31.03 | RobotGuy | My week started out very badly. :( |
| 15:32.19 | solar | RobotGuy: afaik prpplague got the basics merged with openocd trunk. So it probably nearly matches the gentoo stuff. |
| 15:32.47 | prpplague | yea, the lastest svn has all of the hammer/flyswatter stuff merged |
| 15:33.06 | RobotGuy | Hmmmm, I don't know what I was doing wrong then. |
| 15:33.26 | RobotGuy | Maybe I over complicated the setup. |
| 15:34.06 | prpplague | yea just checked, its in svn |
| 15:34.43 | solar | RobotGuy: so the only diff there is the stuff I use blinks on/off the lights a few time when flashing. |
| 15:35.11 | RobotGuy | I was trying to just port over the Gentoo Embedded openocd files to work with buildroot. That looks like it was not a good way to go now. |
| 15:35.44 | solar | should be trivial really |
| 15:36.27 | Crofton | http://uk.youtube.com/watch?v=-gFJ2QfQcb4 |
| 15:36.31 | Crofton | sfw and on topic |
| 15:36.58 | Zagrophyte | wow dorkboard is tiny |
| 15:38.10 | RobotGuy | Zagrophyte: Yes, it is just large enough for the chip and headers all around it. |
| 15:41.22 | Zagrophyte | so you guys use C++? |
| 15:41.30 | solar | likes the arduino diecimila. small is cute but functional is better. |
| 15:41.42 | RobotGuy | solar: My usual tag line is: "I can handle complexity.. It's the simple things that confound me." :) |
| 15:41.42 | Zagrophyte | I guess technically I do too, with arduino |
| 15:41.47 | prpplague | Zagrophyte: only when people force me to |
| 15:42.17 | RobotGuy | Will the Arduino USB keep me from using it as a peripheral to Hammer? |
| 15:42.30 | solar | I learned it and opted to never use it++ |
| 15:42.45 | RobotGuy | I don't use C++ at all. |
| 15:44.38 | chouimat|work | use C++ but that depend on the project |
| 15:44.44 | RobotGuy | I do plan to use the OO features of Python though. |
| 15:45.15 | RobotGuy | Well, I need to get some food, so will be AFK for a bit. |
| 15:46.14 | solar | the use of python to me on an embedded device.. make me go hrmmm.. But to each is his own idea of embedded. |
| 15:47.08 | prpplague | solar: same here |
| 15:47.31 | RobotGuy-Out | As prpplague says, I don't look at things the same way many do. :D BBIAB. |
| 15:47.49 | Zagrophyte | robotguy: you should be able to use serial |
| 15:48.02 | Zagrophyte | it supports softwareserial even if you didnt want to use main RX/TX |
| 15:48.11 | Zagrophyte | any two GPIO |
| 15:50.31 | solar | yeah. Exactly how he should interface the hammer. Via sending custom serial commands to the nail |
| 15:50.44 | solar | from his avrboard |
| 15:51.56 | Zagrophyte | lol |
| 15:56.38 | RobotGuy-Out | Hammer only has a two serial ports and I need the second one for an SSC-32, but then, hmmm, got to see how many serial ports Arduino has.. OK, REALLY AFK now. :P |
| 15:57.13 | solar | prpplague: found the link. http://www.flickr.com/photos/rossturk/ |
| 15:57.42 | prpplague | solar: ahh thanks |
| 15:58.04 | prpplague | RobotGuy-Out: plug in a ft2232 and you got two more serial ports |
| 15:59.49 | prpplague | solar: did they have to reposition your pcb tatt? |
| 15:59.50 | solar | RobotGuy-Out: one. But thats where you are going to get power for the arduino. nail->usb-connector-A arduino->usb-connector-B |
| 16:00.11 | solar | prpplague: yeah. it was a little to low on the calf at first placement |
| 16:01.21 | solar | prpplague: this is the pic that insipred me. http://www.thereminworld.com/pics/schematics/SiliconChip/sc-pcb.gif |
| 16:01.51 | prpplague | hehe cute |
| 16:29.38 | solar | RobotGuy-Out: yeah just looked at the sheild from SFE. Unlike the makershed one. The SFE pkg lacks the extra 1/4 sized BB, but it looks like you can pick one up for about $7.50 USD |
| 16:30.18 | solar | personally. I'd just spend the $15 and order another full shield from makershed |
| 16:33.15 | solar | RobotGuy-Out: n/m even the one on Make: lacks it. I guess I lucked out by getting a complete kit vs trying to pieice to together. |
| 17:16.24 | RobotGuy | solar: Cool. Maybe those kits were specially put together for OSCON. |
| 17:18.45 | RobotGuy | Keil has something going where you can register to win an LPC2460 ARM7 kit. http://www.keil.com/nx/mcb2460 I already registered, since I really like the NXP ARM stuff. |
| 17:26.22 | *** join/#edev roxfan2 (n=dunno@54.216-200-80.adsl-dyn.isp.belgacom.be) |
| 17:36.09 | *** join/#edev MothaWork (n=monmotha@mail.forwardengineering.com) |
| 17:36.54 | MothaWork | anyone in here used the USB gadget stuff much? Is it pretty much "load the module and play" or is it more complicated? |
| 17:42.56 | chouimat|work | CPU running @ 1200Mhz <--- nice :) |
| 17:43.17 | RobotGuy | Show off.. :p |
| 17:43.49 | chouimat|work | RobotGuy: first arm cpu I see over 1Ghz ;) |
| 17:44.28 | MothaWork | what core? |
| 17:44.32 | RobotGuy | ARM over 1 GHz? Ummmm, WHICH? |
| 17:44.50 | RobotGuy | Left or Right? |
| 17:45.00 | chouimat|work | MothaWork: Marvell kirkwood (88F6281 iirc) |
| 17:45.52 | *** join/#edev sjhill (n=sjhill@real.realitydiluted.com) |
| 17:45.52 | *** mode/#edev [+o sjhill] by ChanServ |
| 17:49.28 | MothaWork | chouimat|away: ok, well, that's a beefy one to begin with |
| 17:51.29 | chouimat|work | MothaWork: it's a nice one ... if I could get it to boot |
| 17:51.32 | MothaWork | heh |
| 17:51.37 | MothaWork | we actually just had a Marvell rep here today |
| 17:51.49 | MothaWork | they have so many products I can't keep them straight |
| 17:51.54 | MothaWork | heck, their sales reps can't keep them straight |
| 18:04.13 | *** join/#edev bbradley (n=bbradley@78-105-167-16.zone3.bethere.co.uk) |
| 18:22.52 | *** join/#edev roxfan (n=dunno@54.216-200-80.adsl-dyn.isp.belgacom.be) |
| 19:05.56 | *** join/#edev bbradley (n=bbradley@78-105-167-16.zone3.bethere.co.uk) |
| 19:07.16 | ds2 | quiet morning |
| 19:09.54 | *** join/#edev RobotGuy (n=robotguy@dsl093-038-070.pdx1.dsl.speakeasy.net) |
| 19:16.03 | *** join/#edev g1powermac_PB (n=g1powerm@unaffiliated/g1powermac) |
| 19:17.45 | solar | indeed |
| 19:18.04 | MothaWork | ja |
| 19:53.25 | *** join/#edev methril|laptop (n=methril@141.72.220.87.dynamic.jazztel.es) |
| 20:07.49 | chouimat|work | http://www.linuxdevices.com/news/NS9909143423.html |
| 20:21.59 | MothaWork | I wonder if that's available without the integrated controller |
| 20:32.01 | *** join/#edev magnetron (n=magnetro@unaffiliated/magnetron) |
| 20:39.50 | *** join/#edev prpplague (n=dave123_@ppp-70-244-161-13.dsl.rcsntx.swbell.net) |
| 20:41.00 | *** join/#edev Chocobo (n=swinchen@strongbad.eece.maine.edu) |
| 20:48.51 | prpplague | ho ho ho, merry freakin thursday |
| 20:49.08 | ds2 | at least it is almost over for you! |
| 20:49.13 | ds2 | #@%@#!@$#!@$# PDT |
| 20:51.19 | solar | enjoys working |
| 20:54.52 | agaffney | solar: I do most days |
| 20:55.01 | agaffney | but there's always the "bad" day |
| 20:55.45 | chouimat|work | like today :( |
| 20:56.49 | solar | sorry to hear |
| 20:57.19 | chouimat|work | I think I will need a few weeks to fix all the crap I did today |
| 20:58.36 | chouimat|work | so I guess I won't try to bootstrap gentoo on my new kurobox pro today :) |
| 21:06.18 | solar | chouimat|away: thats armv5te-softfloat-linux-gnueabi afaik. You can pull bins from here. http://tinderbox.dev.gentoo.org/embedded/linwizard/All/ and be done in the next ~hr or so. |
| 21:07.14 | chouimat|work | solar: no stages? |
| 21:08.15 | solar | choum: it's all cross compiled. But if you want to make a stageball. Then just unpack the equiv of 'system' to a dir. |
| 21:08.39 | solar | .tbz2 is just .tar.bz2 with a little extra metadata appended to the end of the tarball |
| 21:08.39 | chouimat|work | k |
| 21:09.11 | chouimat|work | why I have a nice thunderstorm just before I'm ready to go back home ? |
| 21:09.37 | solar | http://tinderbox.x86.dev.gentoo.org/cross-amd64/armv5te-softfloat-linux-gnueabi/All/ (the cross compiler used to make the .tbz2) |
| 21:11.39 | chouimat|work | solar: recent version? |
| 21:12.25 | chouimat|work | nm |
| 21:13.00 | solar | about as recent of a toolchain before I started to focus on the Nail |
| 21:14.04 | chouimat|work | solar: my other options is to use same arm distro we have here ... it's based on es4 :) |
| 21:15.58 | solar | ya. use whatever works for ya. I was just trying to point you at some time/speed saving tips so you could get to work sooner vs later |
| 21:16.56 | chouimat|work | solar: and I appreciate this a lot ... I like gentoo a lot more than redhat es4 or 5 :) |
| 21:19.31 | solar | chouimat|away: this might even be a somewhat official repo for that device. http://buffalo.nas-central.org/download/LSPro_ARM9/Distributions/Genlink/Binaries/armv5tejl-softfloat-linux-gnueabi/ |
| 21:20.09 | chouimat|work | I know this one |
| 21:24.03 | chouimat|work | ok later time to go have a few beers |
| 21:26.51 | *** join/#edev likewise (n=likewise@82-171-51-231.ip.telfort.nl) |
| 21:42.54 | *** join/#edev CosmicPenguin (n=nobody@163.181.251.103) |
| 21:42.54 | *** mode/#edev [+o CosmicPenguin] by ChanServ |
| 21:56.36 | *** join/#edev RobotGuy (n=robotguy@dsl093-038-070.pdx1.dsl.speakeasy.net) |
| 22:53.14 | RobotGuy | Oh, wow, I have $16.46 in my PayPal account now. |
| 23:15.20 | *** join/#edev landley (n=landley@rrcs-71-41-203-118.sw.biz.rr.com) |
| 23:15.20 | *** mode/#edev [+o landley] by ChanServ |
| 23:18.26 | *** join/#edev landley_ (n=landley@rrcs-71-41-203-118.sw.biz.rr.com) |
| 23:21.34 | *** join/#edev landley__ (n=landley@rrcs-71-41-203-118.sw.biz.rr.com) |
| 23:30.57 | solar | living large |
| 23:53.52 | *** join/#edev roxfan2 (n=dunno@253.54-136-217.adsl-dyn.isp.belgacom.be) |
| 23:55.00 | *** join/#edev dijenerate (n=dijenera@69.73.223.106) |
