| 00:04.42 | cmw | prpplague: so did you find any broken out but unused i2c or gpio's ? |
| 00:04.54 | cmw | i saw they use an IOX |
| 00:29.27 | prpplague | cmw: bummer, i don't care for uboot at all, but oh well |
| 00:29.36 | prpplague | cmw: yea there appears to be a number of unused GPIO |
| 00:30.08 | prpplague | cmw: i suspect they had planned on having some additional devices onboard |
| 00:30.19 | prpplague | cmw: but i'm not sure what they had planned |
| 01:14.00 | cmw | prpplague: broken out? |
| 01:45.23 | prpplague | cmw: i.e. pads for a couple small chips |
| 01:51.11 | cmw | prpplague: nice.. specially if they break out the pwm interface. |
| 02:03.39 | cmw | prpplague: making some progress... :) |
| 02:19.56 | prpplague | cmw: you gonna share? |
| 02:20.00 | prpplague | cmw: whats the word? |
| 02:20.13 | prpplague | cmw: i'm not gonna have time untill next week to hack |
| 02:29.43 | cmw | prpplague: dumped most of the firmware out and started an idb for it |
| 02:29.58 | cmw | trying to reverse the uart comms |
| 02:30.07 | cmw | start with that and general hardware init |
| 02:30.21 | cmw | not having an mmu actually helps a lot |
| 02:44.44 | *** join/#edev natdefreitas_mob (n=natdefre@m4c5736d0.tmodns.net) |
| 02:55.48 | *** join/#edev natdefreitas_mob (n=natdefre@m3c5736d0.tmodns.net) |
| 03:11.43 | prpplague | cmw: dandy |
| 03:12.43 | solar | really enjoys his evenings. Don't take them granted |
| 03:19.17 | *** join/#edev natdefreitas_mob (n=natdefre@m4c5736d0.tmodns.net) |
| 03:29.01 | *** join/#edev natdefreitas (n=nathan@user-387hj96.cable.mindspring.com) |
| 03:38.01 | *** join/#edev kergoth (n=kergoth@ip98-167-215-86.ph.ph.cox.net) |
| 03:48.57 | m4t | http://cgi.ebay.com/WYSE-3150SE-TERMINAL-MAIN-LOGIC-BOARD-FTD-841791-02R_W0QQitemZ110407799514QQcmdZViewItemQQptZCOMP_EN_Workstations?hash=item19b4d152da&_trksid=p4634.c0.m14.l1262&_trkparms=|293%3A4|294%3A30 |
| 03:49.04 | m4t | you guys see anything interesting on that? |
| 03:49.38 | m4t | http://tinyurl.com/nvc8mh |
| 03:52.10 | m4t | amd geode/32mb flash/128 ram |
| 04:28.14 | *** join/#edev natdefreitas (n=nathan@user-387hj96.cable.mindspring.com) |
| 05:34.55 | *** join/#edev devilsadvocate (n=quassel@202.3.77.11) |
| 05:41.14 | *** join/#edev mbuf (n=user@59.92.73.133) |
| 06:58.59 | *** join/#edev zsircusr (n=zsirc@160.sub-75-197-103.myvzw.com) |
| 07:07.44 | *** join/#edev devilsadvocate (n=quassel@202.3.77.11) |
| 07:08.43 | *** join/#edev lyakh (n=lyakh@p57BD062A.dip0.t-ipconnect.de) |
| 07:09.28 | *** join/#edev Madsy (n=Madsy@fu/coder/madsy) [NETSPLIT VICTIM] |
| 07:09.28 | *** join/#edev mnemoc (n=amery@shell.opensde.net) [NETSPLIT VICTIM] |
| 07:09.29 | *** join/#edev mnemoc (n=amery@shell.opensde.net) |
| 07:14.35 | *** join/#edev lyakh (n=lyakh@p57BD062A.dip0.t-ipconnect.de) |
| 08:37.20 | *** join/#edev linac (n=lin@122.90.91.203) |
| 08:44.40 | *** join/#edev sunoke (n=sunoke@86.92.247.241) |
| 09:00.20 | *** join/#edev Christos_N (n=Christos@ppp-94-66-54-74.home.otenet.gr) |
| 09:12.19 | Christos_N | Good morning everybody, I'm looking for a guide on how to have buildroot with codesourcery and arm omap35 cortex-a8 |
| 09:13.09 | *** join/#edev mne (n=mne@unaffiliated/mne) |
| 09:13.54 | *** join/#edev yet (n=yet@81.214.107.121) |
| 10:03.23 | *** join/#edev pirho (i=pirho@gateway/gpg-tor/key-0x2CEEC9CB) |
| 10:52.30 | wmat | Christos_N: you're best bet is to send a msg to CodeSourcery's ARM toolchain mailing list |
| 10:53.10 | wmat | Christos_N: http://www.codesourcery.com/archives/arm-gnu/maillist.html |
| 11:13.55 | *** join/#edev g1powermac (n=g1powerm@unaffiliated/g1powermac) |
| 12:09.33 | *** join/#edev brolin (n=brolin@190.158.89.183) |
| 12:30.28 | *** join/#edev GPSFan (n=kenm@64.92.145.112) |
| 12:30.28 | *** mode/#edev [+o GPSFan] by ChanServ |
| 12:55.00 | *** join/#edev sunoke_ (n=irchon@86.92.247.241) |
| 13:04.54 | *** join/#edev sunoke_ (n=sunoke@86.92.247.241) |
| 13:08.06 | *** join/#edev sunoke__ (n=sunoke@86.92.247.241) |
| 13:18.37 | *** join/#edev sunoke_ (n=sunoke@86.92.247.241) |
| 13:44.37 | *** join/#edev mbuf (n=user@59.96.13.61) |
| 13:46.02 | *** join/#edev prpplague (n=prpplagu@70.242.126.101) |
| 13:49.48 | *** join/#edev sunoke_ (n=sunoke@95.98.215.210) |
| 13:56.13 | *** join/#edev miknix (n=miknix@bl4-95-228.dsl.telepac.pt) |
| 13:58.09 | *** join/#edev pirho (i=pirho@gateway/gpg-tor/key-0x2CEEC9CB) |
| 14:54.26 | *** join/#edev solar (n=solar@smtp.gentoo.org) |
| 14:54.26 | *** join/#edev HcE (i=egtvedt@egtvedt.no) |
| 14:54.26 | *** join/#edev MonMotha (i=monmotha@pool-71-127-66-49.aubnin.fios.verizon.net) [NETSPLIT VICTIM] |
| 14:54.26 | *** join/#edev cbrake_away (n=cbrake@oh-69-34-21-229.sta.embarqhsd.net) [NETSPLIT VICTIM] |
| 14:54.27 | *** join/#edev dfarnsworth (n=dfarnswo@65.200.49.156) [NETSPLIT VICTIM] |
| 15:06.03 | *** join/#edev natdefreitas (n=nathan@user-387hj96.cable.mindspring.com) |
| 15:23.54 | *** join/#edev chouimat (n=quassel@CPE002129b5a060-CM0011e6c40c15.cpe.net.cable.rogers.com) |
| 15:24.59 | *** join/#edev linac (n=lin@122.90.84.196) |
| 15:43.25 | *** join/#edev bsdfox__ (n=h36sa@c-71-197-73-68.hsd1.ca.comcast.net) |
| 16:33.35 | *** join/#edev orges (n=yet@81.214.107.121) |
| 16:46.11 | *** join/#edev miknix (n=miknix@81.193.82.203) |
| 16:55.54 | *** join/#edev lyakh (n=lyakh@p57BD062A.dip0.t-ipconnect.de) |
| 19:04.14 | *** join/#edev Christos_N (n=Christos@ppp-94-66-54-74.home.otenet.gr) |
| 20:01.37 | rektide | oh what the fuck |
| 20:01.46 | rektide | i'm trying to order by OpenRD-base board |
| 20:01.53 | rektide | $149 is plastered all over the fucking site |
| 20:01.58 | rektide | but if i add it to my cart its $98 |
| 20:02.03 | rektide | $298 |
| 20:02.12 | rektide | _bastards_ |
| 20:02.58 | Madsy | haha |
| 20:03.07 | agaffney | rektide: probably a volume price |
| 20:03.20 | Madsy | ..or just a scam. |
| 20:03.52 | Madsy | Occam's razor ;-) |
| 20:06.01 | rektide | i think they're just dingbats who dont know how to run a web site |
| 20:10.32 | chouimat | rektide: I got mine for 199 ... openrd-client ... (no case) |
| 20:10.47 | m4t | my dht-walnut psu arrived |
| 20:11.01 | m4t | it fits i dunno if the center pin touches though |
| 20:11.49 | chouimat | I get the openrd-base at 149 |
| 20:12.24 | rektide | yeah thats what i'm expecting |
| 20:12.41 | rektide | it just shows up at $298 in my cart when i add it |
| 20:12.57 | chouimat | check if you have 2 item ;) |
| 20:13.19 | rektide | it says 1. :/ |
| 20:13.51 | rektide | ahhh and this bastardo i bought my laptop from on paypal, he only shipped my laptop yesterday! after a week of sitting around on my payment. |
| 20:16.22 | *** join/#edev roxfan (n=dunno@91.182.229.78) |
| 20:17.24 | *** join/#edev Christos_N (n=Christos@ppp-94-66-54-74.home.otenet.gr) |
| 20:22.26 | *** join/#edev lyakh_ (n=lyakh@p57BD0B9E.dip0.t-ipconnect.de) |
| 20:24.09 | *** join/#edev florian (n=fuchs@g228192055.adsl.alicedsl.de) |
| 20:27.54 | rektide | florian, what kirkwood platform do you have |
| 20:31.39 | florian | hi all |
| 20:32.18 | florian | rektide: a sheevaplug, why do you ask? |
| 20:33.29 | rektide | i'm (attempting to) purchase an openrd platform at the moment |
| 20:33.34 | rektide | and i saw your openwrt commit |
| 20:34.30 | rektide | hopefully the openrd platform isnt so different as to be trouble. i just need the SATA it has, but I know i'm buying myself trouble by not getting a shivaplug, like everyone else. |
| 20:36.26 | m4t | PPCBoot 1.1.2 (Feb 13 2002 - 15:46:54) |
| 20:36.26 | m4t | CPU: IBM PowerPC 405GP Rev. E at 264 MHz (PLB=66, OPB=33, EBC=33 MHz) |
| 20:36.26 | m4t | <PROTECTED> |
| 20:36.27 | m4t | Board: ### No HW ID - assuming WALNUT405 |
| 20:36.31 | m4t | :-) |
| 20:36.39 | Madsy | sheevaplug* |
| 20:36.39 | Madsy | ;-) |
| 20:36.51 | Madsy | Oh. rektide got it right |
| 20:37.19 | Madsy | Several people here have written shivaplug before, which resulted in me searching for the wrong term on google :-) |
| 20:38.00 | rektide | i didnt even notice the spelling difference |
| 20:38.19 | Madsy | They seem to be finally shipping sheevas now with european sockets. |
| 20:39.11 | florian | rektide: the openwrt florian is [florian] :) |
| 20:41.00 | rektide | ah very good. amusing you too got a kirkwood platform. |
| 20:42.37 | rektide | purchasing car inverters by their no-load power draw... this is a "fun" game |
| 20:46.20 | florian | :-) |
| 20:46.40 | florian | rektide: in fact i thought about buying an openrd too :) |
| 21:05.43 | m4t | uImage.elinux boots then panics at mounting the rootfs, which is good |
| 21:05.58 | m4t | need 'setenv bootargs console=ttyS0,9600' |
| 21:07.25 | m4t | the thing is quite fast i think |
| 21:10.31 | m4t | hrm, 2.6.30 still doesnt boot |
| 21:12.46 | m4t | i wonder if its expecting an etc or smth |
| 21:12.54 | m4t | rtc* |
| 21:18.05 | m4t | static int __init walnut_device_probe(void) |
| 21:18.48 | m4t | ... of_instantiate_rtc(); |
| 21:18.48 | m4t | i bet thats it |
| 21:18.48 | *** join/#edev ZeZu (n=null@c-98-227-56-17.hsd1.in.comcast.net) |
| 21:18.49 | m4t | thats near where gdb showed the kernel going into panic |
| 21:31.53 | m4t | i think the board init/probe function returns 0 if the rtc init fails |
| 21:31.59 | m4t | maybe sending it in to panic there |
| 21:32.46 | *** join/#edev orges (n=yet@81.214.107.121) |
| 21:40.17 | *** join/#edev natdefreitas (n=nathan@user-387hj96.cable.mindspring.com) |
| 22:06.06 | *** join/#edev natdefreitas_ (n=nathan@user-387hj96.cable.mindspring.com) |
| 22:09.59 | *** join/#edev natdefreitas (n=nathan@user-387hj96.cable.mindspring.com) |
| 22:10.23 | m4t | alright 2.6.30 compiled with some rtc things removed |
| 22:10.26 | m4t | vmlinux/uImage |
| 22:14.26 | m4t | hrm still no go |
| 22:20.43 | rektide | damn this clamp meter doesnt do A(dc) |
| 22:20.54 | ZeZu | :| |
| 22:21.11 | rektide | thats what i bought it for; coudl've sworn it was specced for it |
| 22:42.14 | m4t | i think the story goes, the 20$ board gets depcrecated in the name of the 1000$ board |
| 22:59.20 | *** join/#edev likewise_ (n=chatzill@82-171-51-231.ip.telfort.nl) |
| 23:14.45 | *** join/#edev lyakh_ (n=lyakh@p57BD0B9E.dip0.t-ipconnect.de) |
| 23:32.57 | m4t | argh |
| 23:33.17 | m4t | i dunno if its the rtc code there or not |
| 23:33.24 | m4t | i pretty much removed it completely |
| 23:33.27 | m4t | still no output |
| 23:40.51 | m4t | could it be that the .dts is off? |