| 00:25.24 | *** join/#edev chouimat (n=quassel@173.32.131.195) |
| 00:27.58 | *** join/#edev Geep (n=JoeBelow@bas21-toronto12-1242561276.dsl.bell.ca) |
| 00:28.25 | Mirell | Hmm... |
| 00:39.52 | *** join/#edev JoeLlama (n=snork@206.169.63.10) |
| 00:45.58 | prpplague^2 | yea whatever |
| 00:52.01 | g1powermac | hey prpplague^2 |
| 00:52.55 | chouimat | hi whateverman ... and the power thingy |
| 00:54.34 | Mirell | prpplague^2: To the 2nd power! |
| 00:55.53 | ds2 | not prpplague XOR 2? ;) |
| 00:56.19 | prpplague^2 | hehe |
| 00:56.29 | prpplague^2 | ds2 still no luck with the mmc/sd slot |
| 00:56.38 | prpplague^2 | ds2 i check the bga pins |
| 00:56.55 | ds2 | prpplague^2: I suspect there might be hard coded stuff for the TWL4030 |
| 00:57.10 | ds2 | what voltage is provided to the MMC/SD slot? |
| 00:57.14 | prpplague^2 | ds2 negatory, i check with TI today |
| 00:57.29 | prpplague^2 | 3.0v |
| 00:58.24 | prpplague^2 | ds2 the board is using a TPS65930, TI even provides a reference for omap3 + tps65930 |
| 01:00.10 | *** join/#edev kergoth (n=kergoth@ip68-108-193-231.ph.ph.cox.net) |
| 01:00.26 | prpplague^2 | kergy! |
| 01:00.35 | prpplague^2 | hands kergoth some beer and prozac |
| 01:00.43 | kergoth | hey |
| 01:02.58 | ds2 | prpplague: Oh.... THAT part... THAT IS a TWL4030 |
| 01:04.03 | prpplague^2 | where does it say that? |
| 01:04.14 | ds2 | no where ;) |
| 01:04.23 | prpplague^2 | from what i gather the twl4030 is basically a tps65950 |
| 01:04.40 | prpplague^2 | they pin for pin compatible |
| 01:04.49 | prpplague^2 | the tps65930 isn't |
| 01:05.13 | ds2 | well, fair enough... the 65930 is a cost reduced TWL4030 but for most purposes it is the same |
| 01:07.16 | prpplague^2 | ds2 yea that is what i gathered, the 65930 doesn't have the battery charging and doesn't have a number of smaller features |
| 01:07.40 | ds2 | that eliminates that possible problem |
| 01:07.58 | ds2 | does the SD card you are using work in a stock BB? |
| 01:08.09 | ds2 | there are a few cards that don't work |
| 01:08.34 | prpplague^2 | ds2 yea as well as two other omap35xx based devices |
| 01:09.23 | ds2 | what does it do currently? |
| 01:09.35 | prpplague^2 | gonna remove the sd/mmc slot tomorrow and attach debug area with a different slot |
| 01:09.42 | prpplague^2 | ds2 nothing |
| 01:09.55 | prpplague^2 | ds2 i basically acts as though there is no mmc1 available |
| 01:10.06 | ds2 | do you get the 40T or 40V thing on the serial or are you wired up to avoid serial boot? |
| 01:10.49 | prpplague^2 | ds2 yea it is wired identical to the peripheral boot on the beagle, which means it tries usb, uart3, then mmc1 |
| 01:11.01 | prpplague^2 | ds2 i get good i/o for both usb and uart |
| 01:11.07 | ds2 | ah |
| 01:11.17 | prpplague^2 | ds2 i can boot from either usb or uart with no issues |
| 01:12.17 | ds2 | and are you using the same 5way socket? |
| 01:12.26 | ds2 | or is it 6way |
| 01:13.15 | prpplague^2 | ds2 yep |
| 01:13.24 | prpplague^2 | ds2 all pinouts confirmed |
| 01:13.45 | prpplague^2 | i even depopulated one of the boards cpu's and rang out the pads |
| 01:14.13 | prpplague^2 | ds2 the whole thing feels like there is some software flag in the rom that is preventing booting |
| 01:14.34 | ds2 | shouldn't be |
| 01:14.40 | ds2 | unless you are using a 34xx part |
| 01:15.01 | prpplague^2 | ds2 nope its 3525 |
| 01:15.28 | ds2 | is it the same package as the BB? (0.4mm pitched balls) |
| 01:17.05 | prpplague^2 | no the BB is a CBB package and the one i'm using is the CBC |
| 01:17.24 | prpplague^2 | in addition this is a HiRel part |
| 01:19.35 | ds2 | and you double checked all the sysboot pins? |
| 01:19.52 | ds2 | when you boot via anything else, what does linux think of the MMC slot? |
| 01:22.12 | prpplague^2 | ds2 well the OS i'm running works with no problems |
| 01:22.48 | prpplague^2 | ds2 the sysboot pins are fine, i set the sysboot pins as gpio inputs and did a check |
| 01:23.10 | prpplague^2 | ds2 they read properly for the same peripheral boot config as the beagle |
| 01:25.25 | ds2 | what silicon is this? |
| 01:26.00 | ds2 | also the sysboot pins are only significant relative to reset... do you know if the are hard wired or driven by some other logic (that may be undefined during reset) |
| 01:28.51 | *** join/#edev lyakh__ (n=lyakh@p57BD1BFD.dip0.t-ipconnect.de) |
| 01:29.22 | prpplague^2 | ds2 hardwired |
| 01:30.39 | prpplague^2 | ds2 the other two omap3525 boards i've done have come up with no problems with regards to the mc |
| 01:30.40 | prpplague^2 | mmc |
| 01:35.02 | ds2 | what about the silicon version? |
| 01:35.28 | prpplague^2 | with regards to what? |
| 01:37.30 | *** join/#edev lampe (n=sugar@p4FC0547B.dip.t-dialin.net) |
| 01:39.34 | *** join/#edev linac (n=lin@59.61.124.212) |
| 01:41.29 | prpplague^2 | interesting, finding some conflicting info with regards to the pin info for vdd_mcc1 |
| 01:48.17 | prpplague^2 | ds2 looks like i found it |
| 01:48.22 | prpplague^2 | goes to the office |
| 01:55.32 | ds2 | ES2, ES3, etc |
| 01:56.31 | prpplague | ds2: just found some docs that indicate that the one of the pads on the CBC package need to be a NC |
| 01:57.04 | ds2 | oh... DOH |
| 01:57.38 | ds2 | wish people would say "DO NOT CONNECT, FACTORY USE ONLY" instead of just saying NC |
| 02:09.43 | joe_bleau | Yeah, everyone seems to learn that lesson the hard way. |
| 02:10.43 | ds2 | there was something that had a pin that says 'NC' but the notes say, connect all NC's to ground |
| 02:20.58 | prpplague | ds2: bingo |
| 02:21.01 | prpplague | ds2: that was it |
| 02:21.05 | prpplague | ds2: i'm done! |
| 02:21.10 | prpplague | goes home |
| 02:25.41 | ds2 | prpplague: good job! |
| 02:33.23 | prpplague^2 | ds2 yep looks like they connected the two NC's to the VDD_MMC |
| 02:33.45 | prpplague^2 | ds2 which from what i can tell are use for a VDD_MMC calibration test |
| 02:34.26 | ds2 | prpplague: too bad silicon makers aren't more open... would have been easier to justlook and see that is the case |
| 02:34.44 | prpplague^2 | ds2 indeed |
| 02:34.55 | ds2 | it is as bad as the SPI stuff |
| 02:53.04 | prpplague^2 | ds2 welp, do the doc work tomorrow, run a few tests and send out the bills |
| 03:11.01 | ds2 | Nice |
| 03:11.53 | Mirell | Mmm. |
| 03:22.26 | prpplague^2 | ds2 well now that i have 4 omap3 board bringups under my belt, should be able to market that a little more |
| 03:28.49 | ds2 | @%$@#%@$@$$$ |
| 03:28.52 | ds2 | (sorry) |
| 03:31.10 | Mirell | ? |
| 03:45.42 | prpplague^2 | ds2 ?? |
| 04:26.59 | *** join/#edev mbuf (n=mbuf@118.102.130.5) |
| 05:10.42 | *** join/#edev mbuf (n=mbuf@stargate.starnet.fi) |
| 05:35.11 | *** join/#edev mbuf (n=mbuf@118.102.130.5) |
| 06:02.29 | *** join/#edev tsjsieb (n=tsjsieb@dejongbeheer.nl) |
| 06:13.06 | *** join/#edev hw (n=hw@p578b3905.dip0.t-ipconnect.de) |
| 07:44.58 | *** join/#edev SandGorgon (n=OmNomNom@122.160.41.129) |
| 07:49.43 | *** join/#edev florian_kc (n=fuchs@port-217-146-132-69.static.qsc.de) |
| 07:51.40 | *** join/#edev JoeLlama (n=snork@pool-71-110-219-97.lsanca.dsl-w.verizon.net) |
| 07:59.46 | *** join/#edev lyakh_ (n=lyakh@p57BD28CD.dip0.t-ipconnect.de) |
| 08:17.06 | *** join/#edev calculus (n=calculus@gentoo/user/calculus) |
| 09:16.05 | *** join/#edev lyakh_ (n=lyakh@p57BD2419.dip0.t-ipconnect.de) |
| 10:41.52 | *** join/#edev pirho (i=pirho@gateway/gpg-tor/key-0x2CEEC9CB) |
| 11:43.38 | *** join/#edev g1powermac (n=g1powerm@unaffiliated/g1powermac) |
| 12:16.04 | *** join/#edev gustavoz (n=gustavoz@200.68.70.115) |
| 12:20.11 | *** join/#edev GPSFan (n=kenm@64.92.145.112) |
| 12:20.11 | *** mode/#edev [+o GPSFan] by ChanServ |
| 12:22.59 | Mirell | needs to read this company's pages deeply in order to drink the marvelous Kool-Aid for the interview... |
| 12:23.25 | agaffney | meh, a job is a job |
| 12:23.37 | agaffney | I'm working for a "shady" internet marketing company |
| 12:25.11 | agaffney | Mirell: which company? |
| 12:26.10 | Mirell | BazaarVoice |
| 12:31.05 | *** join/#edev davidc__ (n=davidc__@64.206.70.187) |
| 13:06.03 | *** join/#edev linac (n=lin@114.114.117.115) |
| 13:15.21 | *** join/#edev g1powermac_EPC (n=chatzill@unaffiliated/g1powermac) |
| 13:16.30 | Mirell | First attempt at omlette, failed! |
| 13:16.44 | g1powermac_EPC | doh |
| 13:17.44 | Mirell | It resulted in a burnt egg pancake with delicious fillings. |
| 13:18.01 | g1powermac_EPC | oh well, just eat the filling :-) |
| 13:18.15 | chouimat | <PROTECTED> |
| 13:18.22 | Mirell | 'swhat I did |
| 13:18.23 | g1powermac_EPC | morning chouimat |
| 13:18.25 | Mirell | mornin' |
| 13:35.59 | *** join/#edev mbuf (n=mbuf@124.123.179.151) |
| 13:42.57 | *** join/#edev Ghurr (n=kvirc@AMontpellier-159-1-69-183.w90-57.abo.wanadoo.fr) |
| 13:43.42 | Ghurr | hi |
| 13:56.00 | *** join/#edev lyakh_ (n=lyakh@p57BD0F70.dip0.t-ipconnect.de) |
| 14:21.33 | prpplague | ho ho hum |
| 14:22.18 | *** join/#edev CosmicPenguin (n=nobody@66-162-99-237.static.twtelecom.net) |
| 14:22.40 | chouimat | good morning prpplague and CosmicPenguin |
| 14:24.21 | prpplague | chouimat: greetings |
| 14:24.29 | florian | hi prpplague |
| 14:25.13 | prpplague | florian: hey bud |
| 14:25.19 | prpplague | florian: what;s cookin in userland dev? |
| 14:26.12 | florian | prpplague: not that much... I still spend most of the time on kernel and oe stuff |
| 14:26.32 | prpplague | florian: ahh i was under the impression you did more userland stuff |
| 14:27.26 | florian | prpplague: yes right... I used to do this but for some reason this has changed. |
| 14:27.37 | kergoth | morning guys |
| 14:27.42 | florian | hi kergoth |
| 14:27.46 | prpplague | kergoth: hey hey |
| 14:27.56 | chouimat | hi kergoth florian |
| 14:28.05 | florian | hi chouimat |
| 14:33.55 | g1powermac_EPC | hey prpplague |
| 14:34.03 | prpplague | g1powermac_EPC: greetings |
| 14:34.20 | g1powermac_EPC | prpplague: how's your business going? |
| 14:34.44 | prpplague | g1powermac_EPC: not to bad, finishing up a board bringup today, gotta do all the doc work and get an invoice out |
| 14:34.53 | g1powermac_EPC | awesome |
| 14:35.02 | prpplague | g1powermac_EPC: gotta get a better web page up |
| 14:35.13 | g1powermac_EPC | hmm |
| 14:35.17 | prpplague | g1powermac_EPC: gotta get a company logo and some business cards |
| 14:35.26 | prpplague | there is always something that has to be done |
| 14:35.50 | chouimat | prpplague: you can even start to imagine ;) |
| 14:35.55 | chouimat | s/can/can't |
| 14:35.55 | g1powermac_EPC | prpplague: you know, that kind of stuff is my specialty |
| 14:37.01 | g1powermac_EPC | i've done so much graphic design stuff for our business, its somewhat scary |
| 14:37.07 | g1powermac_EPC | i've done so much graphic design stuff for our business, its somewhat scary |
| 14:37.27 | g1powermac_EPC | oops |
| 14:37.37 | prpplague | g1powermac_EPC: http://www.rad-tech-labs.com |
| 14:38.12 | g1powermac_EPC | ahh, yea, definitely need a good logo |
| 14:38.20 | prpplague | g1powermac_EPC: i have someone that wants to do the web site, but i've not commited to it as of yet |
| 14:38.53 | chouimat | prpplague: look good |
| 14:39.02 | g1powermac_EPC | prpplague: ahh |
| 14:45.32 | CosmicPenguin | puts on his cape and flies off to save the world... again... |
| 14:46.02 | chouimat | CosmicPenguin: have fun |
| 14:47.31 | CosmicPenguin | Let me also say that the G1 android app is like crack |
| 14:47.38 | CosmicPenguin | sorry - the G1 android facebook app |
| 14:48.13 | chouimat | haha |
| 14:53.29 | *** join/#edev prpplague (n=Dave@adsl-99-57-148-25.dsl.rcsntx.sbcglobal.net) |
| 14:53.46 | prpplague | oops did realize i'd killed my irc client |
| 14:53.50 | prpplague | g1powermac_EPC: any ideas on a logo? |
| 14:55.01 | CosmicPenguin | prpplague: If you want additional quotes on logos / web guys, let me know - one of the AMD refugees has set up his own shop |
| 14:55.58 | prpplague | CosmicPenguin: okie dokie thanks, as soon as i put the final touches on this omap3525 bringup i've got to look at getting the pages done seriously |
| 14:56.36 | CosmicPenguin | Okay, let me know |
| 14:56.44 | CosmicPenguin | he also does firmware - he wrote the Geode BIOS with his own bare hands |
| 14:56.51 | CosmicPenguin | Marc Jones - if you recognize the name from the coreboot world |
| 14:56.54 | *** join/#edev SandGorgon (n=OmNomNom@122.163.214.130) |
| 14:57.06 | prpplague | CosmicPenguin: ahh yea does ring a bell |
| 14:57.21 | prpplague | i have so much work to do it isn't even funny |
| 14:57.44 | CosmicPenguin | same here |
| 15:12.01 | g1powermac | prpplague, not sure, I'd have to think about it for a bit |
| 15:14.11 | g1powermac | well, the kitchen remodel is basically done |
| 15:14.19 | g1powermac | went from this: http://thisoldgadget.com/IMG_5123.JPG |
| 15:14.28 | g1powermac | to this: http://thisoldgadget.com/IMG_5142.JPG |
| 15:14.37 | g1powermac | to this: http://thisoldgadget.com/IMG_5225.JPG |
| 15:15.37 | chouimat | g1powermac: I like the space in 5142 ;) |
| 15:15.55 | g1powermac | and the only guys we hired was an electrician, plumber, and tile installer |
| 15:16.32 | g1powermac | chouimat, hehe, of course, gutted kitchen and family room shots always look good :-) |
| 15:18.38 | g1powermac | would have done the electrical and tile work myself as well if there weren't major issues with both |
| 15:25.46 | *** join/#edev mnemoc (n=amery@shell.opensde.net) |
| 15:28.09 | *** join/#edev lyakh__ (n=lyakh@p57BD0770.dip0.t-ipconnect.de) |
| 15:30.44 | *** join/#edev lyakh (n=lyakh@p57BD07B2.dip0.t-ipconnect.de) |
| 15:53.49 | *** join/#edev lyakh (n=lyakh@p57BD07A1.dip0.t-ipconnect.de) |
| 15:55.28 | *** join/#edev workrat (n=chatzill@adsl-76-234-174-169.dsl.sfldmi.sbcglobal.net) |
| 15:58.40 | *** join/#edev lyakh_ (n=lyakh@p57BD06F8.dip0.t-ipconnect.de) |
| 16:38.32 | *** join/#edev lyakh_ (n=lyakh@p57BD0313.dip0.t-ipconnect.de) |
| 16:41.41 | *** join/#edev lyakh__ (n=lyakh@p57BD04EB.dip0.t-ipconnect.de) |
| 17:10.58 | *** join/#edev mbuf (n=mbuf@124.123.179.151) |
| 17:11.27 | *** join/#edev chouimat (n=quassel@CPE002129b5a060-CM0011e6c40c15.cpe.net.cable.rogers.com) |
| 17:50.41 | *** join/#edev dijenerate (n=dijenera@64.210.44.91) |
| 17:51.01 | *** join/#edev miknix (n=miknix@gentoo/developer/miknix) |
| 18:04.57 | *** join/#edev sav1o (n=savio@jagat.xored.org) |
| 18:38.56 | *** join/#edev _new_Dev_ (n=blabla@41.226.70.79) |
| 18:39.01 | _new_Dev_ | Hi all! |
| 18:39.11 | _new_Dev_ | how are you guys? |
| 19:33.11 | *** join/#edev florian (n=fuchs@f048204022.adsl.alicedsl.de) |
| 19:45.28 | *** join/#edev likewise (n=chatzill@82.171.51.231) |
| 19:45.32 | *** join/#edev lyakh_ (n=lyakh@p57BD2319.dip0.t-ipconnect.de) |
| 20:24.00 | *** join/#edev lyakh__ (n=lyakh@p57BD2107.dip0.t-ipconnect.de) |
| 20:48.17 | Madsy | http://www.arm.com/news/25922.html |
| 21:11.45 | *** join/#edev lyakh_ (n=lyakh@p57BD1E87.dip0.t-ipconnect.de) |
| 21:15.50 | *** join/#edev lyakh (n=lyakh@p57BD1D9B.dip0.t-ipconnect.de) |
| 21:27.41 | *** join/#edev lyakh__ (n=lyakh@p57BD1E9F.dip0.t-ipconnect.de) |
| 22:01.26 | *** join/#edev lyakh_ (n=lyakh@p57BD1A47.dip0.t-ipconnect.de) |
| 22:10.38 | *** join/#edev lyakh__ (n=lyakh@p57BD1BBC.dip0.t-ipconnect.de) |
| 22:21.27 | *** join/#edev lyakh_ (n=lyakh@p57BD19AB.dip0.t-ipconnect.de) |
| 22:34.19 | *** join/#edev davidc__ (n=davidc__@64.206.70.187) |
| 22:44.12 | *** join/#edev lyakh__ (n=lyakh@p57BD15D3.dip0.t-ipconnect.de) |
| 22:59.57 | *** join/#edev lyakh_ (n=lyakh@p57BD176D.dip0.t-ipconnect.de) |
| 23:05.22 | *** join/#edev linac (n=lin@116.205.43.210) |
| 23:32.46 | *** join/#edev chouimat (n=quassel@CPE002129b5a060-CM0011e6c40c15.cpe.net.cable.rogers.com) |
| 23:40.11 | chouimat | is back from the movie theater |
