| 00:32.58 | *** join/#elive Elive_user31_en (~Elive_use@189.236.85.17) |
| 01:23.16 | *** join/#elive Elive_user51_es (~Elive_use@200.109.208.137) |
| 01:23.45 | *** part/#elive Elive_user51_es (~Elive_use@200.109.208.137) |
| 01:45.40 | *** join/#elive Theoden (~quassel@c-98-234-161-226.hsd1.ca.comcast.net) |
| 01:51.28 | *** join/#elive DammitJim (~Elive_use@99-75-58-21.lightspeed.dybhfl.sbcglobal.net) |
| 02:14.55 | *** join/#elive Elive_user90 (~Elive_use@190.67.102.141) |
| 02:19.28 | *** join/#elive gwildor (~gwildor@24-180-216-167.dhcp.aldl.mi.charter.com) |
| 02:55.09 | *** join/#elive Elive_user83_en (~Elive_use@ppp112-228.static.internode.on.net) |
| 03:01.35 | *** join/#elive Theoden (~quassel@c-98-234-161-226.hsd1.ca.comcast.net) |
| 03:02.45 | *** part/#elive acces (~acces@189.158.64.235) |
| 03:05.45 | *** join/#elive Pacma (~Spirit@81.184.153.181.dyn.user.ono.com) |
| 03:17.30 | *** join/#elive Elive_user6 (~Elive_use@190.241.46.149) |
| 04:36.06 | *** join/#elive Elive_user15_es (~Elive_use@200.109.208.137) |
| 04:36.18 | *** part/#elive Elive_user15_es (~Elive_use@200.109.208.137) |
| 06:41.33 | *** join/#elive tejota (~saltwater@cm-93-156-107-132.telecable.es) |
| 07:03.42 | *** join/#elive Isylae (~Celine@95.11.102-84.rev.gaoland.net) |
| 07:45.47 | *** join/#elive Elive_user87_en (~Elive_use@76.89.65.68) |
| 07:47.26 | mindlesslogic | Anyone know why streaming videos online keep freezing after a few seconds? |
| 07:47.39 | mindlesslogic | Is there a temp folder that maybe full? |
| 07:47.54 | keyra | mindlesslogic: microsoft says that a folder is something between the desktop and the trash, just in face of your books and pencils |
| 08:46.26 | *** join/#elive Elive_user1_de (~Elive_use@tmo-105-214.customers.d1-online.com) |
| 09:27.58 | *** join/#elive Elive_user17_de (~Elive_use@p5496C039.dip.t-dialin.net) |
| 09:28.22 | *** part/#elive Elive_user17_de (~Elive_use@p5496C039.dip.t-dialin.net) |
| 09:48.32 | *** join/#elive Spami|Thug_ (~Spami|Thu@ALyon-153-1-58-115.w86-197.abo.wanadoo.fr) |
| 09:51.32 | *** join/#elive Elive_user63_es (~Elive_use@83.45.209.14) |
| 12:36.04 | *** join/#elive OpenSpace (~ja@109.93.242.154) |
| 13:12.54 | *** join/#elive Elive_user83_en (~Elive_use@ppp112-228.static.internode.on.net) |
| 13:12.54 | *** join/#elive Elive_user0_en (~Elive_use@ppp112-228.static.internode.on.net) |
| 13:15.37 | Elive_user83_en | Hi, elive is fantastic. I'm not used to such a good operating system, have I installed it wrong? |
| 13:19.50 | Elive_user83_en | Is there a "compatibility mode" which causes me to swear and bitch all the time? |
| 13:20.11 | Elive_user83_en | if there is, I cant't find it!! |
| 13:20.51 | evryanz | The nurse mode ? |
| 13:20.54 | *** join/#elive Elive_user18_en (~Elive_use@109.92.211.230) |
| 13:21.00 | Elive_user18_en | hmm |
| 13:21.16 | evryanz | You can choose it while booting |
| 13:21.52 | Elive_user83_en | Nurse mode, no I haven't needed to try it. |
| 13:24.17 | Elive_user83_en | Usually use finnix for troubleshooting, I like to be in a completely different environment when troubleshooting |
| 13:24.28 | Elive_user83_en | Just to be carefull, and sure |
| 13:25.09 | *** join/#elive Elive_user18_en (~Elive_use@109.92.211.230) |
| 13:27.20 | Elive_user83_en | Viewless, you will have to contribute more than 'hmm' to be part of the converstation. |
| 13:27.39 | Elive_user83_en | I can do 'hmm' by leaning on the keyboard!! |
| 13:27.39 | elmo40 | moo? |
| 13:28.01 | Elive_user18_en | hey |
| 13:28.18 | Elive_user18_en | how can i put new server here? |
| 13:28.32 | Elive_user18_en | i am on live cd version |
| 13:28.42 | Elive_user18_en | and i am here first time |
| 13:29.59 | evryanz | Elive_user83_en: He came after you asked the question. |
| 13:30.42 | Elive_user18_en | yes i wanna learn somethings about linux |
| 13:30.50 | Elive_user18_en | and i dont know nothing |
| 13:31.00 | Elive_user18_en | :( |
| 13:31.04 | Elive_user83_en | Apols - did not see the join message |
| 13:31.26 | elmo40 | Elive_user18_en: server? |
| 13:31.31 | elmo40 | for IRC ? |
| 13:31.35 | Elive_user18_en | i see now |
| 13:31.44 | Elive_user18_en | yes for irc |
| 13:31.45 | elmo40 | <PROTECTED> |
| 13:31.53 | Elive_user18_en | aaaaaaaaaaaaham |
| 13:31.53 | Elive_user18_en | ok |
| 13:31.56 | Elive_user18_en | tnx |
| 13:33.13 | elmo40 | new to Linux? |
| 13:33.25 | elmo40 | it is a wonderful world. hope you explore and learn :) |
| 13:35.57 | Elive_user83_en | No, Viewless quit and was replaced by another Elive_user18_en. |
| 13:37.12 | elmo40 | one issue with E17. it is not backwards compatible |
| 13:37.18 | elmo40 | can't load something like this in the latest. http://exchange.enlightenment.org/theme/show/694 |
| 13:38.40 | Viewlles | i know that is server |
| 13:38.43 | Viewlles | tnx |
| 13:38.54 | Viewlles | i am first time here with linux elive |
| 13:41.57 | Elive_user83_en | These are pooled connection names, or are they part of the install code? |
| 13:41.58 | elmo40 | Viewlles: Elive is great. Linux is great. Any questions so far? |
| 13:45.35 | Elive_user83_en | elmo40 & Viewlless, elive is great, different thinking but compatible with everything you can learn a lot |
| 13:45.54 | Elive_user83_en | Been with elive since pre gem, loved it always. |
| 13:47.09 | Viewlles | hmm |
| 13:47.37 | Elive_user83_en | Heard that before!! :-) |
| 13:48.07 | elmo40 | Elive_user83_en: what is your nick? |
| 13:48.46 | Elive_user83_en | Don't have one as such. |
| 13:49.27 | Elive_user83_en | Found that learning how to set screen name was too hard and detracted from programming. |
| 13:49.44 | Elive_user83_en | Don't need to be permenant as such. |
| 13:50.13 | elmo40 | if you have been here for a while you should know a little about me. |
| 13:50.22 | elmo40 | I too have been using Elive before GEM. |
| 13:50.29 | elmo40 | since 0.3, to be precise |
| 13:50.51 | Elive_user83_en | Have had a break for about for about 2 years. |
| 13:51.15 | elmo40 | been helping thana over the past 5 years ;) |
| 13:51.26 | Elive_user83_en | Good work!!! |
| 13:51.39 | Elive_user83_en | Left windows in 2002 |
| 13:52.29 | Elive_user83_en | been through slakware (1992) suse, debian, elive, ubuntu and now back to elive |
| 13:53.17 | Elive_user83_en | Might have had a nic of vineman on this group years ago |
| 13:53.38 | elmo40 | Viewlles: now, one thing you need to know, Elive 2.0 is based on Debian Lenny. Many programs are NOT up to date due to how Lenny releases software. |
| 13:53.53 | keyra | elmo40: Debian is the SH%$T my friend ! |
| 13:54.08 | elmo40 | if you want the latest of any software you may have to learn something about compiling... not something I recommend for a first timmer. ;) |
| 13:54.42 | Elive_user83_en | sorry keyra, debian is one of the best, if not the best. |
| 13:54.57 | keyra | Elive_user83_en: np :) |
| 13:56.24 | Elive_user83_en | Oh yeah, there was redhat in there too! call me immature but I liked the logo! |
| 13:59.12 | Elive_user83_en | Ok, so should I choose to change my screen name, how would I do it ??? |
| 13:59.27 | keyra | Elive_user83_en: press Control + S to change your nickname :) |
| 13:59.47 | elmo40 | <PROTECTED> |
| 14:00.08 | vineman | Cool thanks!! |
| 14:00.16 | elmo40 | anytime |
| 14:00.19 | elmo40 | I am here to help |
| 14:00.33 | vineman | I'm not too old to learn, just too old to go looking!! |
| 14:01.34 | vineman | Look, I'm just trying to drumm up a bit of conversation here |
| 14:01.49 | elmo40 | I hear ya |
| 14:01.59 | vineman | 3 years ago, you could not get a word in edge ways. |
| 14:03.38 | elmo40 | what are you working on these days? |
| 14:03.50 | elmo40 | I am trying to retrofit my new toy :) |
| 14:04.18 | elmo40 | 1945'ish Sears 109.0703 http://bayimg.com/BAMdGAaCI |
| 14:04.34 | vineman | Not much computer wise - forth on avr is the my current project |
| 14:05.05 | vineman | was object pascal guru |
| 14:05.26 | vineman | keep looking at current software and it is crap! |
| 14:05.49 | elmo40 | I hear ya |
| 14:06.00 | elmo40 | I keep wondering why firefox gets heavier and heavier. |
| 14:06.22 | elmo40 | but I can't code that well, don't know how to update 1.x to handle all the stuff 3.x handles |
| 14:06.28 | elmo40 | like facebook stuff |
| 14:06.57 | vineman | because the management have lost connection with the users - I mean real users, not marketing victims |
| 14:07.32 | vineman | elive was a disruptive technology - it made you old hardware work |
| 14:07.33 | elmo40 | opera and others are not what I want, either... |
| 14:07.41 | elmo40 | ya, I know :P |
| 14:07.51 | vineman | but went against the grain |
| 14:07.56 | elmo40 | 2.0 is still good with 'sorta' old hardware, but it too is getting more heavy |
| 14:08.26 | elmo40 | compiz is a waste, in my mind |
| 14:08.40 | keyra | elmo40: to enable compiz just go to the e17 modules and enable the 'ecomorph' one |
| 14:09.11 | vineman | Look, glitz (compiz) is nice and it stops us getting bored |
| 14:09.56 | vineman | but 98% of the world can't get computers - glitz or no glitz |
| 14:10.48 | vineman | How much more output does a new comuter gize us? elive is plenty fast |
| 14:11.40 | vineman | I really liked pre-gem openoffice blender etc in a bootable cd - awesome |
| 14:11.55 | vineman | show someone that and they were hooked |
| 14:12.49 | elmo40 | that is what I mean. no more cool apps put into it since it is getting more 'bloat' |
| 14:13.01 | elmo40 | don't know what is consuming all the space... |
| 14:14.15 | vineman | probably 2.6 kernel (could be wrong) but I think we have have lost sight of the target and gone on the ver 2 is better than 1 because the number is higher |
| 14:15.15 | vineman | I still run routers on 2.4 kernels they are just as secure, but don't support more modern hardware |
| 14:16.54 | vineman | btw, love your toy |
| 14:17.05 | vineman | you have a lot of work to do. |
| 14:17.51 | vineman | I run 12x24 lathe, mill and surface grinder here in some other work I do |
| 14:20.07 | elmo40 | what I run at work is damn amazing. |
| 14:20.16 | elmo40 | brand new 4 and 5-axis CNC machines |
| 14:20.35 | elmo40 | and two 5-axis lathes |
| 14:20.47 | elmo40 | 7, if you count the second spindle and tool holders. |
| 14:21.30 | elmo40 | hrmm... |
| 14:21.31 | elmo40 | http://www.elive.pro/ |
| 14:23.24 | vineman | Never was in the cnc biz, unless you do volume well, niche is the only way to go |
| 14:23.47 | vineman | maybe a thought for elive? |
| 14:26.20 | elmo40 | different kind of elive |
| 14:26.31 | elmo40 | something about broadcasting and live commenting |
| 14:26.36 | elmo40 | nothing to do with Linux |
| 14:26.41 | elmo40 | other then their server is LAMP |
| 14:27.55 | vineman | So watcha going to do with the old sears? |
| 14:28.17 | vineman | What size is it? |
| 14:28.20 | elmo40 | use http://linuxcnc.org and modernize it |
| 14:28.21 | elmo40 | :P |
| 14:28.30 | elmo40 | 2.0 > 1.0, right? |
| 14:28.31 | elmo40 | lol |
| 14:29.07 | vineman | yeah, but 1.9 ~ 2.0 for large values of 1.9 |
| 14:30.00 | *** join/#elive AlexAnteMachina (~Elive_use@p57941E81.dip.t-dialin.net) |
| 14:30.03 | elmo40 | >_< |
| 14:30.21 | vineman | I'd love to do a cnc conversion, but the backlash is always a killer |
| 14:30.48 | elmo40 | but if I ln(1.9) and ln(2.0) it is only 0.05 difference. |
| 14:31.01 | elmo40 | ya, I will make a new brass nut for it |
| 14:31.22 | vineman | unless you got ball screws or equiv, a trained operator beats it hands down. |
| 14:31.45 | elmo40 | ya, I know |
| 14:31.50 | vineman | ignoring ln(0) |
| 14:31.56 | elmo40 | you can program backlash, lathe would be simple enough |
| 14:32.01 | elmo40 | you go one way anwyays |
| 14:32.54 | vineman | no, the tool bites in, makes a groove and you pull it back to the correct position using software |
| 14:33.47 | vineman | If the tool does not move! |
| 14:34.01 | elmo40 | lathes usually push into the part. unless you are facing it or parting it off there isn't much backlash, except the feed in to center. |
| 14:34.08 | elmo40 | cross feed is fine to have backlash |
| 14:34.12 | elmo40 | but yes, the less the better |
| 14:35.43 | vineman | Yes the push + backlash is the problem - you are held on the rear flanck of thread while pushing, then the bit moves you the front of the next flank |
| 14:36.56 | vineman | that should be you are at the front of the next of next flank - and probably without moving the encoder |
| 14:38.31 | vineman | Let me try that whole sentance again! |
| 14:38.46 | elmo40 | lol |
| 14:38.48 | elmo40 | I understand |
| 14:39.02 | elmo40 | trust me, I deal with 'chinglish' at work... |
| 14:40.24 | vineman | Everyone says "software" but the rate terms you must derive for this problem are non-trivial and don't inculed backlash |
| 14:40.52 | vineman | Anyway - back to elive asap |
| 14:41.28 | vineman | Don't want to hijak this thread |
| 14:41.48 | vineman | but love old machines! |
| 14:42.14 | elmo40 | there is no serial number on my machine, but I believe it is pre-1050 ! |
| 14:42.31 | vineman | That would be dark ages! |
| 14:42.55 | elmo40 | before my time |
| 14:43.05 | vineman | mee to |
| 14:43.11 | vineman | How are the ways? |
| 14:43.35 | elmo40 | a little rusty |
| 14:43.39 | elmo40 | but livable |
| 14:44.35 | vineman | a bit of tlc, hours of time should see what it can do |
| 14:44.46 | vineman | All machinery is a work in progress |
| 14:45.04 | vineman | a bridge to what you think you want |
| 14:45.39 | vineman | You should remember clearly those that were fun, and those that made you money! |
| 14:45.57 | elmo40 | true |
| 14:46.05 | elmo40 | this ismy first lathe conversion |
| 14:46.16 | elmo40 | I have a little cnc mill, already |
| 14:46.47 | vineman | cool, stepper or servo (for both) |
| 14:47.21 | *** join/#elive Elive_user (~Elive_use@190.139.209.200) |
| 14:48.19 | vineman | you doing pcb with the cnc - or is it a bit bigger? |
| 14:48.51 | elmo40 | stepper for the ways, but I want a servo for the spindle so I can thread with it |
| 14:49.29 | elmo40 | I have a driver board already, for the steppers. http://www.hobbycnc.com/products/hobbycnc-pro-chopper-driver-board-kits/ |
| 14:49.47 | elmo40 | and 3 x 1100oz.in steppers |
| 14:49.50 | elmo40 | only need 2 :P |
| 14:50.01 | vineman | Steppers will *really* limit your depth of cut |
| 14:50.19 | vineman | but that means you don't need coolant <g> |
| 14:50.28 | elmo40 | didn't you see the lathe? :P I can only take a 0.020" cut anyways, LOL |
| 14:50.50 | vineman | not if you put 3hp on it! |
| 14:51.19 | elmo40 | on that small thing? |
| 14:51.21 | elmo40 | not a chance |
| 14:51.25 | elmo40 | 1Hp MAX |
| 14:51.35 | elmo40 | even then, probably only gong to use 1/2 Hp |
| 14:51.47 | elmo40 | mmm, beer&pizza& 10am is good |
| 14:51.51 | vineman | Just kidding! |
| 14:51.51 | elmo40 | should do it more often |
| 14:52.15 | vineman | Yeah, 12:50 am here in Orange NSW |
| 14:52.36 | vineman | Oh, yeah, Australia |
| 14:54.57 | vineman | elmo40, you doing (or hope to) do commercial work with your setup? |
| 14:58.16 | elmo40 | I try to make all my purchases to produce an income |
| 14:58.26 | elmo40 | *try*... being the operative word |
| 14:59.30 | vineman | where are you? |
| 14:59.59 | elmo40 | apt: elmo40 |
| 14:59.59 | apt | i guess elmo40 is a canuck of estonian descent, and the master of nick completion |
| 15:00.07 | elmo40 | Canada |
| 15:00.14 | *** join/#elive Elive_user6 (~Elive_use@164.73.136.180) |
| 15:00.14 | elmo40 | (canuck) |
| 15:00.45 | vineman | How is the GFC (global fried chicken) hitting your manufacturing over there? |
| 15:01.09 | elmo40 | fried chicken? |
| 15:01.17 | elmo40 | shit, we don't manufacture anything any more |
| 15:02.00 | vineman | Sorry, global financial crisis, but is sounds so much more friendly as a chicken |
| 15:02.46 | elmo40 | I suppose |
| 15:02.49 | elmo40 | I am in debt |
| 15:02.52 | elmo40 | the country is in debt |
| 15:02.55 | elmo40 | the IMF owns us all |
| 15:03.03 | elmo40 | they are about to bankrupt OPEC |
| 15:03.10 | elmo40 | and will own all the Oil soon |
| 15:03.19 | elmo40 | then our ass is theirs! |
| 15:03.33 | elmo40 | so... to put a rosy picture in place, I am still alive |
| 15:03.38 | vineman | The theory says if you are in sh!t, you might as well be in deep sh!t |
| 15:03.39 | elmo40 | making 'the man' rich. |
| 15:04.49 | vineman | greece does not look good, nor the ramifications of the gulf of mexico - deepwater horizon blowout |
| 15:05.48 | vineman | We are somewhat untouched here in Australia, but we are a major iron and coal exporter to china |
| 15:06.27 | elmo40 | BP --> Busted Pipe... Broken Promise... Blank Paper... |
| 15:06.40 | elmo40 | untouched? what on earth are you talking about? |
| 15:06.48 | *** join/#elive PrinceAMD (~princeamd@unaffiliated/princeamd) |
| 15:06.53 | elmo40 | you have such censorship it is insane! |
| 15:06.55 | AlexAnteMachina | hey PrinceAMD |
| 15:06.56 | AlexAnteMachina | o/ |
| 15:06.58 | elmo40 | your gov't OWNS you |
| 15:07.16 | vineman | yeah, true |
| 15:07.28 | elmo40 | they even control the net |
| 15:07.31 | elmo40 | like China... |
| 15:07.46 | vineman | Don't start me!!!!! |
| 15:08.14 | *** join/#elive DammitJim (~Elive_use@99-75-58-21.lightspeed.dybhfl.sbcglobal.net) |
| 15:08.30 | vineman | Yes, we are relativly untouched |
| 15:08.34 | elmo40 | :P |
| 15:08.40 | elmo40 | keep telling yoruself that |
| 15:08.56 | vineman | manufacturing has gone offshore |
| 15:09.25 | vineman | it is now cheaper to have injection moulding dies made in china and shipped here |
| 15:09.26 | elmo40 | to where you export Coal and Iron! |
| 15:09.41 | elmo40 | why even ship them? just make the parts in china as well! |
| 15:10.10 | vineman | If you want control, you still do the grunt work here, hi tech is gone |
| 15:11.43 | vineman | but there is still a good supply of repair and maintanance shops, but it is too expensive to train new people |
| 15:12.32 | PrinceAMD | hey |
| 15:12.34 | PrinceAMD | hey AlexAnteMachina |
| 15:12.38 | AlexAnteMachina | ho, PrinceAMD |
| 15:13.07 | vineman | I fear this will be the end of trained of mechanical specialist, just like we will see the end of hard core kernel programmers |
| 15:13.14 | PrinceAMD | AlexAnteMachina, just got home from paying some bills :/ |
| 15:13.26 | AlexAnteMachina | lol |
| 15:13.57 | AlexAnteMachina | And I've just (nearly) finished elive-translations. Just 1 single Message is left. |
| 15:14.05 | AlexAnteMachina | :) |
| 15:14.12 | keyra | AlexAnteMachina: eltrans is the Elive translator tool, a very easy and guided way to made translations for Elive (and e17 too), it sends automatically your translations, you can download it from http://us.repository.elive-systems.com/pool/main/e/eltrans/ , ask me about poedit before to use eltrans |
| 15:14.57 | vineman | elmo40, thanks for the chat, got to get some snooze. |
| 15:15.42 | vineman | what should I do to pause my interaction to the group and the rejoin? |
| 15:21.19 | vineman | is away: Screenshot of Elive: http://elivecd.org/Main/Screenshots |
| 15:21.57 | AlexAnteMachina | PrinceAMD, I will have to pay some bills these days, too. |
| 15:22.23 | AlexAnteMachina | is still waiting for the big donations to come... |
| 15:22.42 | PrinceAMD | :) AlexAnteMachina lol, brb going game alittle then study M$$ |
| 15:28.35 | elmo40 | paying bills sucks |
| 15:28.46 | AlexAnteMachina | yep. absolutely. |
| 15:28.49 | keyra | elmo40: The first thing to do if anything sucks is to report it to http://bugs.elivecd.org ! Or do you think things might get fixed magically without anybody knowing?? |
| 15:28.53 | AlexAnteMachina | LOOL |
| 15:29.03 | AlexAnteMachina | yes, elmo40 do as keyra tells! |
| 15:29.17 | keyra | AlexAnteMachina: :) |
| 15:41.04 | AlexAnteMachina | c'mon, elmo40, write a report for thana about how much paying bills sucks |
| 15:41.07 | AlexAnteMachina | *gg* |
| 15:41.19 | keyra | AlexAnteMachina: The first thing to do if anything sucks is to report it to http://bugs.elivecd.org ! Or do you think things might get fixed magically without anybody knowing?? |
| 15:41.49 | AlexAnteMachina | Maybe he'll write a app... "reject-all-bill"... or something similar. |
| 15:41.51 | AlexAnteMachina | ;) |
| 15:43.39 | *** join/#elive OpenSpace (~ja@109.93.99.159) |
| 15:44.47 | elmo40 | I should... but he can't help us all |
| 15:44.54 | elmo40 | apt-get remove bills |
| 15:46.01 | AlexAnteMachina | apt-get install money |
| 15:48.30 | *** join/#elive Elive_user57_de (~Elive_use@dslb-094-219-247-217.pools.arcor-ip.net) |
| 15:50.34 | elmo40 | apt-get install money-tree |
| 15:52.39 | AlexAnteMachina | lol... |
| 15:52.56 | AlexAnteMachina | elmo40, you need to be /root |
| 15:52.57 | AlexAnteMachina | ;) |
| 15:53.07 | AlexAnteMachina | trees need /roots |
| 16:05.26 | *** join/#elive Elive_user54_es (~Elive_use@200.109.208.137) |
| 16:05.51 | *** part/#elive Elive_user54_es (~Elive_use@200.109.208.137) |
| 16:08.51 | elmo40 | >_< |
| 16:14.15 | *** join/#elive Elive_user11_de (~Elive_use@pD9E4E38F.dip.t-dialin.net) |
| 16:51.52 | *** join/#elive Elive_user8_de (~Elive_use@dslb-092-078-135-172.pools.arcor-ip.net) |
| 17:16.52 | *** join/#elive she_dyed (~jazz@adsl-64-237-22.mia.bellsouth.net) |
| 17:17.11 | *** part/#elive she_dyed (~jazz@adsl-64-237-22.mia.bellsouth.net) |
| 17:17.33 | *** join/#elive Elive_user48_en (~Elive_use@89-212-69-32.dynamic.dsl.t-2.net) |
| 18:01.48 | *** join/#elive Elive_user6_es (~Elive_use@189.130.86.163) |
| 18:01.59 | Elive_user6_es | @seen thanatermesis |
| 18:02.04 | Elive_user6_es | !seen thanatermesis |
| 18:02.33 | *** join/#elive mathesis (~Elive_use@unaffiliated/mathesis) |
| 18:02.34 | mathesis | !seen thanatermesis |
| 18:02.43 | mathesis | @seen thanatermesis |
| 18:03.13 | DammitJim | keyra |
| 18:06.04 | AlexAnteMachina | mathesis, ping |
| 18:06.20 | AlexAnteMachina | apt, seen thanatermesis |
| 18:06.22 | apt | thanatermesis <~unknown@unaffiliated/thanatermesis> was last seen on IRC in channel #elive, 59d 19h 50m 57s ago, saying: 'MrSandman, have you see this email ?'. |
| 18:06.52 | mathesis | ufff 2 months |
| 18:13.03 | DammitJim | MrSandman, where are you? |
| 18:21.20 | *** join/#elive Elive_user77_de (~Elive_use@dslb-088-070-077-091.pools.arcor-ip.net) |
| 18:33.21 | *** join/#elive Theoden (~quassel@c-98-234-161-226.hsd1.ca.comcast.net) |
| 18:48.02 | *** join/#elive Elive_user47_es (~Elive_use@190.228.255.60) |
| 19:33.47 | *** join/#elive Elive_user61_es (~Elive_use@189.188.7.11) |
| 19:56.31 | *** join/#elive Elive_user91_es (~Elive_use@190.67.174.252) |
| 20:00.18 | *** join/#elive Elive_user59 (~Elive_use@cablelink113-169.telefonia.intercable.net) |
| 20:05.51 | *** join/#elive Elive_user37_en (~Elive_use@41.234.162.178) |
| 20:34.11 | *** join/#elive Elive_user11 (~Elive_use@189.216.36.226) |
| 21:19.44 | *** join/#elive dronan (~dronan@jabber.org.by) |
| 21:20.40 | *** part/#elive dronan (~dronan@jabber.org.by) |
| 21:36.49 | *** join/#elive ma_tex (~matex@87-205-28-152.ip.netia.com.pl) |
| 21:50.54 | ma_tex | hi |
| 22:03.31 | *** join/#elive Theoden (~quassel@c-98-234-161-226.hsd1.ca.comcast.net) |
| 22:39.18 | LinuxNIT | hi |
| 22:40.30 | gwildor | hiya LinuxNIT |
| 22:40.46 | LinuxNIT | he gwildor |
| 22:40.52 | LinuxNIT | hey |
| 22:41.17 | gwildor | how you been? |
| 22:41.26 | LinuxNIT | been good and your self? |
| 22:41.26 | gwildor | GAH i need to fix my space bar |
| 22:41.30 | gwildor | im alright |
| 22:45.02 | LinuxNIT | wrote a nice fat check yesterday :) |
| 22:45.23 | LinuxNIT | paid off the wifes student loan... that felt good |
| 22:46.51 | gwildor | yeah, till they send you for collections for not paying $0.00 |
| 22:47.13 | LinuxNIT | LOL |
| 22:56.38 | ma_tex | I have one question if I have installed Elive Gem 1.0 upgrade and turn it removes me vale Elive if I need to change the repo |
| 22:59.16 | gwildor | "vale elive" |
| 23:01.25 | *** join/#elive Elive_user63_fr (1009@77-56-203-84.dclient.hispeed.ch) |
| 23:02.11 | ma_tex | does not understand |
| 23:05.42 | gwildor | me neither |
| 23:08.20 | ma_tex | hmm |
| 23:08.38 | ma_tex | well we have problem |
| 23:09.22 | gwildor | i dont understand your question can you as again? |
| 23:10.08 | gwildor | yeah ,imma have to dosomething |
| 23:14.17 | ma_tex | jeÅli zainstaluje elive gem 1.0 i bÄde chciaÅ przeprowadzic aktualizacje to usunie mi cale elive czy musze zmieniÄ repo |
| 23:14.57 | gwildor | yeah.....english plz |
| 23:15.14 | gwildor | atleast, if you expect me to answer |
| 23:16.02 | gwildor | awesome....fixe my space bar with a few pieces of scotch tape |
| 23:18.39 | ma_tex | gwildor, ok my englisch is sack :( |
| 23:20.52 | gwildor | you have gem installed, and want to change repos...right? |
| 23:21.40 | ma_tex | yes |
| 23:21.41 | gwildor | let me see if i can translate what you said |
| 23:22.12 | gwildor | ma_tex, what language is that? |
| 23:23.23 | gwildor | polish? |
| 23:23.49 | ma_tex | I tried in English |
| 23:24.32 | ma_tex | yes I just come from Polish |
| 23:25.47 | gwildor | can you try to ask 1 more time in english? |
| 23:26.17 | gwildor | Czy można spróbowaÄ do zadawania 1 wiÄcej czasu w jÄzyku angielskim, idź powolne. |
| 23:26.57 | ma_tex | can lie down again, and how the work is wypooczne ask again |
| 23:27.27 | gwildor | Jestem stara siÄ pomóc, wiem zero polski, zapewne Pan wie niewiele angielski. Musimy wiÄc wykorzystanie angielski |
| 23:27.35 | gwildor | my polish no good? |
| 23:27.43 | ma_tex | sorry but 12h work is tiring |
| 23:28.06 | gwildor | yes, i know....trying to use translate |
| 23:28.14 | ma_tex | no your polish i very well :) |
| 23:29.55 | ma_tex | but my eanglish i very bad |
| 23:31.02 | gwildor | Ok, Pan zainstalowane elive gem, i chce zmieniÄ repos, ale też chce zlikwidowaÄ elive?? Odpowiedzi w jÄzyku polskim |
| 23:31.41 | gwildor | Jeżeli chce zlikwidowaÄ opakowaÅ, powinien jedynie zmiany systemu paÅstwa bardzo niewiele. bÄdzie nadal "wyglÄ
d" te same |
| 23:32.59 | ma_tex | I fear that I would lose a whole Elive invisible from where proud new repo |
| 23:33.44 | gwildor | Czy można powiedzieÄ to, co opakowaÅ chce zlikwidowaÄ? |
| 23:34.22 | ma_tex | I'm sorry but I am a chef and sometimes does not understand how someone writes to me in English |
| 23:34.40 | gwildor | it is ok, write in polish |
| 23:36.05 | gwildor | you understand my polish? |
| 23:37.06 | ma_tex | me write in english |
| 23:37.11 | ma_tex | :) |
| 23:37.33 | ma_tex | you use google/translate? |
| 23:37.37 | gwildor | yes |
| 23:37.43 | ma_tex | ok |
| 23:38.36 | ma_tex | fillers may I ask is even support for Elive 1.0 Gem |
| 23:39.14 | gwildor | Nie rozumiem, proszÄ mówiÄ w jÄzyku polskim |
| 23:39.40 | gwildor | OH, ok |
| 23:39.55 | gwildor | yes, there is still some support for elive gem |
| 23:40.10 | gwildor | fillers == first |
| 23:41.29 | ma_tex | :) |
| 23:41.35 | ma_tex | ok |
| 23:41.37 | gwildor | Dla dużych problemów, niektóre mogÄ
powiedzieÄ: "modernizacji do topaz" |
| 23:41.58 | ma_tex | wÅaÅnie chodziÅo mi o topaz |
| 23:42.11 | gwildor | Dla maÅych problemów, gem jest ok |
| 23:42.30 | ma_tex | wiec Åwietnie |
| 23:43.01 | gwildor | Aby uzyskaÄ peÅnÄ
topaz, musisz zainstalowaÄ z ISO |
| 23:44.40 | ma_tex | I apologize for the fact that my questions were not too clear but I try how can I thank you so much and with the aid |
| 23:45.27 | gwildor | Nie stanowi problemu, i pomoże dowolnym czasie. przykro nie pamiÄtam polski do lepszej |
| 23:45.50 | ma_tex | ohhh I don't mony tu pey :( I have to make do with gem |
| 23:47.44 | gwildor | ohhh, I dont't money to pay : ( i have to make do with gem |
| 23:47.50 | gwildor | Apt-bÄda modernizacji gem jest dobry system. lub wykorzystanie mogÄ
skorzystaÄ z najnowszych wersji dev. bÄdÄ pastÄ link |
| 23:48.10 | ma_tex | my English is good for nothing because it is not polished because no time and I forget a lot but big thanks for the help |
| 23:48.37 | gwildor | http://www.elivecd.org/Download/Development |
| 23:49.10 | gwildor | Można pobraÄ ze strony tej uzyskaÄ niemal topaz, lepszym niż gem. |
| 23:50.06 | ma_tex | hmm |
| 23:50.56 | ma_tex | good idea |
| 23:51.06 | gwildor | Nie jest 100% topaz, to jest 99% topaz, gem topaz jest 50% |
| 23:52.59 | ma_tex | big thanks for helping me a very useful and even sometimes sleep idze |
| 23:53.17 | ma_tex | good night |
| 23:54.11 | ma_tex | I hope you understand my English |
| 23:54.50 | ma_tex | very thanks to help |
| 23:55.20 | ma_tex | gwildor, |
| 23:55.44 | ma_tex | goes to sleep peacefully |
| 23:56.24 | gwildor | good nite ma_tex |
| 23:56.36 | gwildor | your last english is good |
| 23:57.12 | ma_tex | :) |
| 23:57.33 | ma_tex | thanks |
| 23:57.49 | gwildor | any time |
| 23:57.54 | gwildor | no problem |
| 23:58.08 | *** part/#elive ma_tex (~matex@87-205-28-152.ip.netia.com.pl) |