| 03:52:58 | VerxHome | anyone here familiar with fdisk on an ipaq? |
| 03:53:11 | VerxHome | I think I need some more information, it isn't working as I would expect. . . |
| 03:54:32 | VerxHome | oh, I see |
| 03:54:40 | VerxHome | card eject makes the cf card invisible |
| 15:06:27 | phlegm | Hey all.... Just trying linux on the ipaq again after a couple of months absence. Windows removed all my files on the last sync so I figured it would be a good time. ANyways. I am at the point where I set up my ppp connection and I'm getting this error. |
| 15:06:46 | phlegm | May 26 07:07:32 islapn34 pppd[5099]: pppd 2.4.1 started by phlegm, uid 0 |
| 15:06:46 | phlegm | May 26 07:07:32 islapn34 chat[5100]: expect (ogin) |
| 15:06:46 | phlegm | May 26 07:07:35 islapn34 chat[5100]: alarm |
| 15:06:46 | phlegm | May 26 07:07:35 islapn34 chat[5100]: send (^M) |
| 15:06:46 | phlegm | May 26 07:07:35 islapn34 chat[5100]: expect (ogin:) |
| 15:06:47 | phlegm | May 26 07:07:35 islapn34 chat[5100]: ^M |
| 15:06:49 | phlegm | May 26 07:07:35 islapn34 chat[5100]: familiar login: |
| 15:06:51 | phlegm | May 26 07:07:35 islapn34 chat[5100]: -- got it |
| 15:06:53 | phlegm | May 26 07:07:35 islapn34 chat[5100]: send (ppp^M) |
| 15:06:55 | phlegm | May 26 07:07:35 islapn34 pppd[5099]: Serial connection established. |
| 15:06:57 | phlegm | May 26 07:07:35 islapn34 pppd[5099]: Using interface ppp0 |
| 15:07:01 | phlegm | May 26 07:07:35 islapn34 pppd[5099]: Connect: ppp0 <--> /dev/ttyS0 |
| 15:07:03 | phlegm | May 26 07:07:35 islapn34 /etc/hotplug/net.agent: assuming ppp0 is already up |
| 15:07:05 | phlegm | May 26 07:08:07 islapn34 pppd[5099]: LCP: timeout sending Config-Requests |
| 15:07:07 | phlegm | May 26 07:08:07 islapn34 pppd[5099]: Connection terminated. |
| 15:07:09 | phlegm | May 26 07:08:07 islapn34 pppd[5099]: Exit. |
| 15:07:11 | phlegm | May 26 07:08:07 islapn34 /etc/hotplug/net.agent: NET unregister event not supported |
| 15:07:13 | phlegm | Any Idead? |
| 15:07:15 | phlegm | Ideas? |
| 15:12:06 | MartinG | hplegm: what do you see if you log in as ppp at the serial console? |
| 15:12:46 | phlegm | hrmmm sec.. |
| 15:13:52 | phlegm | familiar login: ppp |
| 15:13:52 | phlegm | PAM_unix[161]: (login) session opened for user ppp by LOGIN(uid=0) |
| 15:13:52 | phlegm | -pppd: must be root to run -pppd, since it is not setuid-root |
| 15:14:04 | phlegm | hrmmm.... |
| 15:14:46 | MartinG | phlegm: its a problem with familiar 0.5.2 |
| 15:15:08 | MartinG | phlegm. sign on as root and do "chmod +s /usr/sbin/pppd" |
| 15:15:36 | MartinG | phlegm: and probably "modprobe ppp" while youre at it. then sign off and try again. |
| 15:16:31 | phlegm | Receive serial link is not 8-bit clean: |
| 15:16:31 | phlegm | Problem: all had bit 7 set to 0 |
| 15:16:51 | phlegm | I remember this one from last time. Is trhis when I need to add local to the end of optione? |
| 15:17:56 | MartinG | hmm. i remeber that too, but i didnt have to do it with 0.5.2 |
| 15:19:21 | phlegm | rebooting.... |
| 15:21:18 | MartinG | how are you running pppd on the pc side? |
| 15:21:36 | phlegm | I get "module /lib/modules/2.4.18-rmk3/pcmcia/prism2_cs.o not available" at boot so my wireless card doesn't work. That's why I'm trying the ppp so I can at least get the basics installed before playing around with the wireless nic.. |
| 15:22:01 | phlegm | pppd call ipaq. I made the changes to the files as in the howto... |
| 15:22:35 | MartinG | whats in your /etc/ppp/peers/ipaq ? (just to compate to mine in case its different) |
| 15:23:39 | phlegm | -detach |
| 15:23:39 | phlegm | noauth |
| 15:23:39 | phlegm | nocrtscts |
| 15:23:39 | phlegm | lock |
| 15:23:39 | phlegm | local |
| 15:23:40 | phlegm | user ppp |
| 15:23:42 | phlegm | connect '/usr/sbin/chat -v -t3 ogin--ogin: ppp' |
| 15:23:44 | phlegm | /dev/ttyS0 |
| 15:23:46 | phlegm | 115200 |
| 15:23:48 | phlegm | 192.168.1.100:192.168.1.101 |
| 15:25:08 | MartinG | same as mine, except i don't have the "local" line. cant remember what it means either.. |
| 15:25:26 | phlegm | I just tried without it... |
| 15:25:37 | phlegm | What dist are you running? |
| 15:25:45 | phlegm | RH 7.3 here... |
| 15:26:00 | MartinG | 7.2 |
| 15:26:27 | MartinG | what model is your ipaq? |
| 15:26:31 | MartinG | 3800 here. |
| 15:27:29 | phlegm | 3630.... I got it working. I had to add local to my options file on the ipaq. whoo hoo... |
| 15:27:45 | MartinG | nice one. |
| 15:28:14 | MartinG | now, if you get dns working from the ipaq let mw know how. thats where im stuck now. |
| 15:29:25 | phlegm | you have ssh working? When I try to connect it won't accept the rootme for the password.. |
| 15:30:11 | MartinG | thats strange. you sure you are doing "ssh root@192.168.1.101" and not just "ssh 192.168.1.101" ? |
| 15:30:11 | phlegm | nevermind... |
| 15:30:29 | sistie | Hi there! |
| 15:30:33 | phlegm | It worked with just ssh 192.168.1.101 but I had to be root for some reason. |
| 15:31:12 | MartinG | phlegm: because by default ssh will use the current user as the login for the remote machine. |
| 15:31:59 | sistie | Where can I tell linux that the filesystem of my microdrive is now reiserfs and not ext2? It tries to mount it with ext2. |
| 15:32:34 | MartinG | sistie: /etc/fstab |
| 15:33:10 | phlegm | MartinG: I had to add this to get my dns working "echo "nameserver 24.153.22.195" >> /etc/resolv.conf" |
| 15:33:59 | phlegm | ipkg is working. Wheee! |
| 15:34:34 | MartinG | phlegm: thats all you did on the ipaq and it works? |
| 15:36:32 | phlegm | Yep.... I had to do some stuff on the desktop side to do the masquerading. secc I'll post it. |
| 15:36:59 | phlegm | #Turn on masquerading |
| 15:36:59 | phlegm | echo 1 > /proc/sys/net/ipv4/ip_forward |
| 15:36:59 | phlegm | ipchains -F |
| 15:36:59 | phlegm | ipchains -A forward -s 192.168.1.101 -j MASQ |
| 15:36:59 | phlegm | ipchains -A forward -l -j DENY |
| 15:37:25 | phlegm | Try that on your desktop.... |
| 15:37:45 | phlegm | Hrmmm I want to install opie... do I need the full familiar prior? |
| 15:40:14 | VerxHome | anyone on the familiar list see Jamey's post about dual booting familiar? |
| 15:41:04 | phlegm | Anybody know what modules I need to install for a d-link dcw-650f CF wireless card? |
| 15:47:43 | VerxHome | phlegm: modprobe dlink-650f-run-for-30-seconds-then-lock-up.o |
| 15:48:15 | phlegm | huh |
| 15:48:17 | phlegm | ? |
| 15:48:37 | phlegm | It doesn't work??? Works great with ce and on my laptop.... |
| 15:48:55 | VerxHome | your laptop is running windows, right? |
| 15:49:19 | phlegm | I haven't got around to trying it under linux on it yet.. |
| 15:49:43 | VerxHome | phlegm: I have 3 of those cards |
| 15:49:47 | VerxHome | they run fine under windows |
| 15:49:52 | VerxHome | the one linux machine I have using one |
| 15:50:01 | VerxHome | I need to eject, re-insert the card about every 10 minutes |
| 15:50:04 | VerxHome | the driver just dies |
| 15:50:34 | phlegm | will it work on the ipaq? |
| 15:50:50 | VerxHome | I never even bothered to try |
| 15:50:57 | VerxHome | I need to get rid of the card I have |
| 15:51:01 | VerxHome | and get something useful |
| 15:51:03 | VerxHome | (for linux) |
| 15:54:52 | phlegm | VerxHome: What modules does it use under linux? |
| 15:55:20 | VerxHome | lemme go in the other room and eject the card/reinsert it |
| 15:55:23 | VerxHome | it died again |
| 15:56:17 | phlegm | heh heh... You are using the Compact Flash card right?? The pcmcia one works great on the linux box I use as a base statoion. |
| 15:57:23 | phlegm | be back in 5 |
| 15:58:42 | VerxHome | oh, crap |
| 15:58:47 | VerxHome | I compiled it in the kernel |
| 15:58:48 | VerxHome | no module |
| 15:58:56 | VerxHome | (that was the most stable way I could get it to work) |
| 15:59:06 | VerxHome | so I don't even remember what module name it is |
| 16:01:14 | phlegm | heh.. no probs |
| 16:01:36 | VerxHome | but no, I am not using the CF one |
| 16:01:40 | VerxHome | I am using the PCMCIA one |
| 16:01:48 | VerxHome | most flakey network box I have EVER used |
| 16:02:05 | phlegm | I;m using it and it works great on my desktop in an adapter card... |
| 16:02:12 | VerxHome | including the days when the intel ethernet cards had drivers that were reverse engineered |
| 16:02:29 | VerxHome | phlegm: Mine is in the adapter card from d-link that it came with |
| 16:02:51 | phlegm | Same here... weird... |
| 16:02:57 | VerxHome | dmesg is nothing but 10 BILLION of this message: |
| 16:03:05 | VerxHome | eth1: Error -110 writing packet header to BAP |
| 16:03:10 | VerxHome | it scrolled forevermore |
| 16:04:09 | VerxHome | er, scrolls |
| 16:04:40 | phlegm | weird... I installed the wlan and pcmcia packages from source and it just worked. heh |
| 16:05:38 | phlegm | wlan=wvlan |
| 16:06:19 | VerxHome | what kernel? |
| 16:07:20 | VerxHome | I haven't messed with this since november 26th of last year |
| 16:07:25 | VerxHome | it is running 2.4.14 SMP |
| 16:07:36 | VerxHome | I think some of my problems MIGHT be related to SMP |
| 16:09:19 | phlegm | 2.4.18-3 |
| 16:09:53 | phlegm | I do see lots of other people on google having the same probs... Some guy mentioned that when he went back to the wvlan drivers it worked fine. |
| 16:10:49 | VerxHome | ok |
| 16:10:52 | VerxHome | I will take a look |
| 16:11:06 | VerxHome | I need to get that system to run stable at some point anyway |
| 16:11:40 | VerxHome | I am hoping to use it to distribute video to my lan |
| 16:38:52 | phlegm | everything is up and running. Thanks everybody and see ya around. |
| 17:01:04 | VerxHome | anyone know what package contains mkcramfs ? |
| 17:49:22 | MartinG | can someone help me with dns lookups on my ipaq. i have the nameserver in resolv.conf, but it cant look up hosts. it reaches them fine if i use the IPs. any ideas? |
| 18:42:53 | Yorkshire | Anyone know if familiar will boot on a toshiba e570 ? |
| 19:06:22 | VerxHome | can anyone tell me if there are ipkgs for compiling qt apps? |
| 19:06:30 | VerxHome | ie, for the compiler and such |
| 19:08:22 | VerxHome | well crap |
| 19:08:39 | VerxHome | looking at stuff, it appears that the ONLY way I can do what I want is with intimate |
| 19:08:56 | VerxHome | and I think it is still too big to fit everything I need on a 256MB CF card |
| 21:17:05 | knobee | 'lo, all. |
| 21:21:55 | phlegm | Hey all. I installed Linux/Opie after a few month absence using the dreaded pocketpc. Everything works great and it looks like you guys have made some great progrss. Congrats. |
| 21:22:15 | phlegm | Now for the question. When I install my d-link wireless compact flash card I get the following. |
| 21:22:17 | phlegm | May 26 17:32:13 localhost cardmgr[587]: socket 0: Z-Com LANEscape/XI300 11Mb/s WLAN Card |
| 21:22:17 | phlegm | May 26 17:32:13 localhost cardmgr[587]: executing: 'modprobe prism2_cs' |
| 21:22:17 | phlegm | May 26 17:32:13 localhost cardmgr[587]: + modprobe: Can't locate module prism2_cs |
| 21:22:17 | phlegm | May 26 17:32:13 localhost cardmgr[587]: modprobe exited on signal 127 |
| 21:22:18 | phlegm | May 26 17:32:13 localhost cardmgr[587]: module /lib/modules/2.4.18-rmk3/pcmcia/prism2_cs.o not available |
| 21:22:18 | phlegm | May 26 17:32:14 localhost cardmgr[587]: get dev info on socket 0 failed: Resource temporarily unavailable |
| 21:22:31 | a7r | install the prism2_cs module. |
| 21:22:36 | | ipkgfind is at http://ipkgfind.48ers.dk/ or at http://ipkgfind.handhelds.org |
| 21:22:36 | a7r | ibot: ipkgfind? |
| 21:22:44 | a7r | look at that URL, and find out what packages you need. |
| 21:23:06 | phlegm | cool... I've been searching them and had no luck. I'll try this url. |
| 21:24:08 | phlegm | no packages found... Ugh.. |
| 21:24:56 | phlegm | I found this on an old mailing list. |
| 21:24:58 | phlegm | Package: wlan-ng-0.1.8-pre13-2.4.7-rmk2-np1-devfs |
| 21:24:58 | phlegm | Essential: no |
| 21:24:58 | phlegm | Priority: optional |
| 21:24:58 | phlegm | Version: fam4 |
| 21:24:58 | phlegm | Architecture: arm |
| 21:24:59 | phlegm | Maintainer: Steve Redler IV <steve@sr-tech.com> |
| 21:25:01 | phlegm | Depends: pcmcia-modules-2.4.7-rmk2-np1-devfs |
| 21:25:03 | phlegm | Filename: ./sjohnson/wlan-ng-0.1.8-pre13-2.4.7-rmk2-np1-devfs_fam4_arm.ipk |
| 21:25:05 | phlegm | Size: 153708 |
| 21:25:09 | phlegm | MD5Sum: 39cd3e278ebf78240139c45edd5d10b0 |
| 21:25:11 | phlegm | Description: prism2cs modules for kernel 2.4.7-rmk2-np1-devfs |
| 21:25:13 | phlegm | This package contains the prism2_cs, associated modules and |
| 21:25:15 | phlegm | configuration programs nessesary to enable the use of prism2 |
| 21:25:17 | phlegm | based pcmcia wireless lan cards on the iPaq. Read the doc file |
| 21:25:19 | phlegm | ooks like it existed at one point.. |
| 21:25:25 | knobee | ok, dumb question that I can't seem to find the answer to: how do I upgrade my bootloader? I want to try out the dual boot stuff, but I don't have WinCE installed to run bootblaster... |
| 21:27:02 | phlegm | hrmmm the package prism2-modules-2.4.18-rmk3 has a prism2.o and it inserts ok. Anybody know how I make the ipaq call this instead of prism2_cs.o or even what the difference is? |
| 21:27:31 | knobee | phlegm: I had to edit my /etc/pcmcia/ .. uh .. something.. look in the mailing list archives. |
| 21:27:57 | knobee | it took a while, but I found what I was looking for... it had to do with editing the entry for the WL11 and making it work for the Dlink. ;) |
| 21:28:37 | phlegm | cool... feel like posting your /etc/pcmcia ? ;) |
| 21:29:00 | knobee | don't have a working ipaq at the moment... ;) In the midst of upgrading the bootloader. |
| 21:29:32 | phlegm | Ugh... hey is there a way to search the archives? |
| 21:29:45 | knobee | yes. hold on and I'll find the URL... |
| 21:30:25 | knobee | http://www.handhelds.org/pipermail/familiar/ |
| 21:31:05 | phlegm | cool.. thanks.... |
| 21:31:52 | phlegm | Hey that's the url where I was.. There's no searching.... |
| 21:31:55 | phlegm | ;) |
| 21:32:08 | knobee | oh... hmmm... |
| 21:32:43 | phlegm | crap... dinners on the table. I'LL BE BACK..... |
| 21:32:50 | knobee | http://www.handhelds.org/cgi-bin/search.cgi?q=DWL-650&ps=20&o=0&m=all&ul= |
| 21:46:53 | knobee | it would seem the answer is get to the boot prompt and then do a "load bootldr" |
| 21:53:11 | phlegm | knobee: Hey guy.. is your card the compact flash wireless one or the full pcmcia card? |
| 21:53:54 | VerxHome | Can anyone help me? Installing intimate has prevented me from being able to boot up anymore |
| 21:55:32 | knobee | full pcmcia |
| 21:55:51 | knobee | woah!! New bootloader rocks |
| 21:56:23 | phlegm | ahhh. mine is the compact flash card. Looks like I found something though. |
| 21:56:33 | knobee | ah.... |
| 21:56:35 | knobee | cool. |
| 21:57:22 | knobee | I just bought a 5GB pcmcia card and now need a dual pcmcia card so I can have networking and Linux at the same time... ;) |
| 21:57:31 | knobee | dual pcmcia card sleeve... |
| 21:59:25 | knobee | phlegm: I think the trick for me was installing orinoco-modules-2.4.18.rmk3 (hh6) |
| 22:00:07 | phlegm | sweet... |
| 22:04:26 | knobee | VerxHome: you still there |
| 22:06:10 | knobee | phlegm: what ipaq do you have? |
| 22:07:42 | knobee | http://zealot.blacknet.de/ipaq/ |
| 22:17:53 | knobee | hey gonz. |
| 22:18:38 | gonz | hey knobee |
| 22:37:25 | knobee | gonz, any chance you have a 3800 rom image around? |
| 22:37:42 | gonz | nope, 3630 here |
| 22:37:49 | knobee | I'm trying out the dual-boot stuff and would actually like to put 2002 back on ;) |
| 22:38:25 | knobee | ah, thanks anyway. I'll google around and see what I can find. |
| 23:13:43 | knobee | anybody know how to determine if I need to drop the first XX bytes off of "h3800_image" before I send it to the iPAQ? |
| 23:15:45 | knobee | http://www.handhelds.org/feeds/wince/ |
| 23:20:14 | VerxHome | knobee: I am still here |
| 23:20:15 | VerxHome | why? |
| 23:21:22 | knobee | you said your iPAQ was unbootable. |
| 23:21:27 | knobee | I was interested in what happened. |
| 23:21:30 | VerxHome | oh |
| 23:21:39 | VerxHome | intimate's linuxrc doesn't work on my ipaq |
| 23:21:49 | VerxHome | I was able to revert back to the previous linuxrc |
| 23:21:49 | knobee | ah. |
| 23:22:03 | VerxHome | and am now trying to see what about the linuxrc.intimate is not working |
| 23:22:15 | knobee | cool. |
| 23:22:17 | VerxHome | I am very suspicious it is caused by busybox |
| 23:23:21 | knobee | I'm 28MB into a 33MB restore of WinCE ... |
| 23:23:28 | knobee | I'm hoping that it actually works. |
| 23:23:33 | VerxHome | bleh |
| 23:23:39 | VerxHome | I couldn't go back to wince now |
| 23:23:44 | VerxHome | no frigging way |
| 23:24:07 | knobee | I only want it for the games.. ;) |
| 23:24:19 | knobee | VerxHome: do you have a cross-development environment working? |
| 23:24:51 | knobee | is looking for a set of linux-wlan-ng drivers and the promiscuous mode patches for the Prism2 cards. |
| 23:24:52 | VerxHome | I have cross compile working for kernel stuff |
| 23:25:02 | VerxHome | I wrote my own compaq microkeyboard driver |
| 23:25:24 | | a7r was last seen on #familiar 2 hours, 2 minutes and 40 seconds ago, saying: look at that URL, and find out what packages you need. [Sun May 26 22:22:44 2002] |
| 23:25:24 | cruiserman | ibot seen a7r |
| 23:28:12 | cruiserman | knobee: im tryign to get a prism2 card working too! ive got a lucent card which works great but i also have a linksys WPC11 i cant seem to get going :( |
| 23:28:52 | knobee | I got a dlink working. |
| 23:29:21 | cruiserman | knobee: i plug it in an i get: |
| 23:29:22 | cruiserman | cardmgr[81]: unsupported card in socket 1 |
| 23:29:22 | cruiserman | cardmgr[81]: product info: "The Linksys Group, Inc.", "Instant Wireless Netwo" |
| 23:29:22 | cruiserman | cardmgr[81]: manfid: 0x0274, 0x1613 function: 6 (network) |
| 23:29:22 | knobee | orinoco-modules-2.4.18.rmk3 was the magic I ended up with... |
| 23:29:59 | cruiserman | you edit /etc/pcmcia/config with: |
| 23:30:00 | cruiserman | card "Linksys WPC11 Instant Wireless" |
| 23:30:00 | cruiserman | manfid 0x0274, 0x1613 |
| 23:30:00 | cruiserman | bind "orinoco_cs" |
| 23:30:05 | cruiserman | ? |
| 23:30:09 | knobee | as soon as I get the CF boot working, I'll try to document what I did. |
| 23:30:13 | knobee | yes, that sounds about right. |
| 23:30:40 | cruiserman | hmm |
| 23:30:42 | cruiserman | ok |
| 23:31:17 | knobee | I happen to have about a zillion wireless cards and lucked out that one or two were supported "out of the box" |
| 23:31:32 | cruiserman | knobee: i grabbed the linux-wlan-ng-0.1.14-pre3 and was gonna compile my self |
| 23:31:33 | knobee | but my goal is to get kismet running (http://www.kismetwireless.net) |
| 23:31:44 | cruiserman | dido |
| 23:31:45 | cruiserman | :) |
| 23:32:04 | knobee | see: http://alan.clegg.com (follow the 802.11 mapping project link) |
| 23:32:16 | cruiserman | thats why i bought this card, cuz to tell you the truth, i prefer the lucent/orinoco |
| 23:32:24 | knobee | I'm giving a talk in DC next Friday and would like to have it working by then. |
| 23:32:42 | cruiserman | talk for a wireless group? |
| 23:32:43 | knobee | the D-Link cards are best easy to modify for the external antenna. |
| 23:32:49 | knobee | SummerCon 2002 |
| 23:32:54 | knobee | http://www.summercon.org |
| 23:32:58 | cruiserman | kewl |
| 23:33:16 | cruiserman | i wish kismet worked with the lucent cards |
| 23:33:44 | knobee | lucent cards don't support monitor mode. |
| 23:33:49 | knobee | it's the card's fault ;) |
| 23:33:56 | cruiserman | oic |
| 23:34:09 | knobee | well, my WinCE install farked out, so I have a working DLink. |
| 23:34:28 | knobee | you need my entry from pcmcia/config? |
| 23:34:35 | cruiserman | btw, i wheel too! |
| 23:34:54 | cruiserman | you ever wheel here in CA? |
| 23:35:04 | knobee | nope, only here in NC. |
| 23:35:26 | cruiserman | id like to see your entry for the config, yes |
| 23:35:58 | knobee | orinoco_cs.c 0.11 (David Gibson <hermes@gibson.dropbear.id.au> and others) |
| 23:35:58 | knobee | eth0: Station identity 001f:0004:0001:0003 |
| 23:35:58 | knobee | eth0: Looks like an Intersil firmware version 1.03 |
| 23:36:31 | knobee | card "D-Link DL-650 PC Card" |
| 23:36:31 | knobee | manfid 0x0156, 0x0002 |
| 23:36:31 | knobee | bind "orinoco_cs" |
| 23:36:57 | cruiserman | hnn, you even kept the manfid, the guys on wireless said to ditch it but it still doenst work |
| 23:37:00 | cruiserman | :( |
| 23:37:04 | knobee | guess that does not halp much with your card... ;) |
| 23:37:12 | cruiserman | oh, well |
| 23:37:14 | cruiserman | thanks |
| 23:37:16 | knobee | sorry... |
| 23:37:31 | knobee | you know the Dlink cards are on sale at Best Buy for $50 |
| 23:37:39 | knobee | ($70 with a $20 rebate) |
| 23:37:48 | cruiserman | really! |
| 23:37:55 | knobee | they were here last week. |
| 23:38:08 | knobee | I've bought all of mine (3 now) on eBay. |
| 23:38:11 | cruiserman | i just bought it 2 days ago |
| 23:40:00 | VerxHome | knoebee: CF or PCMCIA? |
| 23:40:05 | knobee | pcmcia |
| 23:40:09 | VerxHome | ahhh |
| 23:40:11 | knobee | the CF ones are HIGH HIGH. |
| 23:40:14 | VerxHome | yeah, don't need any more of those |
| 23:40:15 | knobee | like $119 or so. |
| 23:40:43 | cruiserman | hmm, they dont even list it on there site |
| 23:41:15 | knobee | anybody have ideas on where I can pick up a (cheap) dual pcmcia sleeve? |
| 23:41:36 | cruiserman | i bought one but at full pop :( |
| 23:41:45 | cruiserman | but there nice |
| 23:41:50 | knobee | how cumbersome does it make the ipaq? it looks pretty big. |
| 23:42:09 | knobee | (I bought a 5GB pcmcia drive and want to use it and a wireless card at the same time) |
| 23:42:13 | cruiserman | cant really stick it in you pocket comfortabley |
| 23:42:25 | VerxHome | knobee: Let me put it this way |
| 23:42:27 | cruiserman | thats my next purchase |
| 23:42:29 | VerxHome | I have a CF sleeve |
| 23:42:35 | VerxHome | a single slot PCMCIA sleeve |
| 23:42:39 | VerxHome | and a dual slot PCMCIA sleeve |
| 23:42:47 | VerxHome | I only use the dual when I -*ABSOLUTELY*- have to |
| 23:42:56 | VerxHome | it is THAT bulky and ridiculously huge |
| 23:43:03 | knobee | VerxHome: right. I was afraid of that. |
| 23:44:07 | cruiserman | i carry a stowaway and the dual sleeve in my fanny pack to/from work so i dont find it *THAT* bad |
| 23:44:27 | VerxHome | well |
| 23:44:38 | VerxHome | I find that with the single slot pcmcia sleeve |
| 23:44:43 | VerxHome | and a microkeyboard |
| 23:44:55 | VerxHome | I have pretty much everything I need to if I run the busybox version of familiar |
| 23:45:02 | VerxHome | gives me several extra MB of storage |
| 23:49:13 | knobee | gotta reboot the laptop.. back in a few. |
| 23:52:33 | cruiserman | hmm, why is there an /lib/module/drivers/net/wireless/orinoco_cs.o and a prism2.o but no prism2_cs.o? |
| 23:53:18 | cruiserman | isnt there suppose to be? if prism2-module-2.4.18-rmk3 is loaded |