| 00:00.46 | clem | yes |
| 00:02.10 | rob__ | i told the ipad to use 10.0.0.2 and its still using 192.168.0.202 anyway! |
| 00:02.12 | rob__ | sheesh |
| 00:02.49 | clem | since a Familiar iPAQ expects by default to be on 192.168.0.200/255.255.255.0 (that's 192.168.0.0/24), you can put your PC eth0 address (and the other private IP addresses on your ethernet network) say on 192.168.10.0/24 |
| 00:03.00 | clem | <PROTECTED> |
| 00:03.05 | clem | on the iPAQ |
| 00:03.15 | rob__ | there are quite a few pc's on this network though |
| 00:03.29 | clem | ok, then the 10.0 solution is the best one |
| 00:03.39 | clem | (for you ipaq) |
| 00:04.15 | rob__ | Horay |
| 00:04.25 | rob__ | Pc is now responding to ping |
| 00:05.07 | rob__ | dont know if nat is working yet though |
| 00:05.13 | rob__ | doesnt look like it is :( |
| 00:06.31 | rob__ | cant ping google, by name or by ip |
| 00:07.22 | clem | ok, you need to check iptables and the ip_forward stuff in /proc |
| 00:07.29 | clem | and the gateway address of course |
| 00:07.45 | rob__ | gateway on ipaq is set as 10.0.0.1 |
| 00:07.52 | rob__ | which is the Pc |
| 00:08.39 | rob__ | what should subnet be? |
| 00:08.46 | rob__ | buth are on 255.0.0.0 now |
| 00:08.58 | rob__ | 192.168.0.0 * 255.255.255.0 U 0 0 0 eth0 |
| 00:08.58 | rob__ | 10.0.0.0 * 255.0.0.0 U 0 0 0 usb0 |
| 00:08.58 | rob__ | loopback * 255.0.0.0 U 0 0 0 lo |
| 00:08.58 | rob__ | default gateway.mshome. 0.0.0.0 UG 0 0 0 eth0 |
| 00:09.44 | clem | what does cat /proc/sys/net/ipv4/ip_forward do? |
| 00:10.22 | clem | did you try to ping machines on your 192.168.* ethernet network? |
| 00:10.31 | rob__ | 1 |
| 00:10.35 | rob__ | no, but will do |
| 00:11.09 | clem | do you see MASQUERADE all -- iPAQ_IP anywhere if you type iptables -L -t nat? |
| 00:11.35 | rob__ | all empty |
| 00:11.46 | clem | do you have any other firewalling rule, and did you try to remove them all but this one? |
| 00:11.49 | clem | empty? |
| 00:12.05 | rob__ | bash-2.05b# iptables -L -t nat |
| 00:12.05 | rob__ | Chain PREROUTING (policy ACCEPT) |
| 00:12.05 | rob__ | target prot opt source destination |
| 00:12.05 | rob__ | Chain POSTROUTING (policy ACCEPT) |
| 00:12.06 | rob__ | target prot opt source destination |
| 00:12.10 | rob__ | Chain OUTPUT (policy ACCEPT) |
| 00:12.12 | rob__ | target prot opt source destination |
| 00:12.53 | rob__ | machine will not ping within local net |
| 00:13.03 | rob__ | is the nat bit that is being pain |
| 00:15.21 | clem | you forgot to run iptables -t nat -A POSTROUTING -s iPAQ_IP -j MASQUERADE |
| 00:15.26 | clem | (see http://dudu.dyn.2-h.org/nist/ipaq.php#t3.3) |
| 00:15.30 | rob__ | distcc? |
| 00:15.40 | rob__ | sorry, wrong part of thread |
| 00:15.41 | clem | of course you need to have the masquerade support in your iptables |
| 00:15.45 | clem | :) |
| 00:15.49 | rob__ | hmm |
| 00:16.14 | rob__ | bash-2.05b# iptables -L -t nat |
| 00:16.14 | rob__ | Chain PREROUTING (policy ACCEPT) |
| 00:16.14 | rob__ | target prot opt source destination |
| 00:16.14 | rob__ | Chain POSTROUTING (policy ACCEPT) |
| 00:16.15 | rob__ | target prot opt source destination |
| 00:16.17 | rob__ | MASQUERADE all -- 10.0.0.2 anywhere |
| 00:16.21 | rob__ | Chain OUTPUT (policy ACCEPT) |
| 00:16.23 | rob__ | target prot opt source destination |
| 00:16.25 | rob__ | thats better |
| 00:16.33 | clem | yes |
| 00:17.05 | rob__ | PING FROM GOOGLE! |
| 00:17.18 | clem | yeah, you see it was easy ;) |
| 00:17.19 | rob__ | very slow, 184 |
| 00:17.24 | clem | it's normal |
| 00:17.29 | clem | it's an iPAQ after all ;) |
| 00:17.58 | rob__ | clem, i owe you a drink. iread practically every howto/wikki about and it was no help |
| 00:18.01 | rob__ | thanks man |
| 00:18.30 | rob__ | will try deb sometime soon... |
| 00:18.31 | rob__ | :) |
| 00:18.55 | rob__ | now downloading updates etc |
| 00:19.42 | clem | hehe, don't feel compelled to try debian for that ;) |
| 00:19.55 | rob__ | wanted to for a while now |
| 00:20.05 | rob__ | but not 2night. |
| 00:20.07 | clem | I prefer your idea of a drink, so email me if you happen to be in washington DC ;) |
| 00:20.27 | clem | hehe, I guess you deserve to sleep now ;) |
| 00:20.30 | rob__ | next time im in the states (which isnt that often) |
| 00:20.35 | rob__ | many thanks clem |
| 00:20.44 | rob__ | cya - Rob Clark |
| 00:21.38 | clem | ok :) |
| 00:22.44 | rob__ | one thing. |
| 00:23.16 | rob__ | why wont ipkg let me use "update" |
| 00:25.26 | clem | no output is normal, if ipkg -v is 0.99.105 |
| 00:25.47 | rob__ | hmm |
| 00:25.54 | clem | (besides you need to check there is a Package file where your feed addresses, in /etc/ipkg*, point to) |
| 00:26.04 | rob__ | # ipkg install xirc2ps-modules_2.4.19-rmk6-pxa1-hh36.5_ipaqpxa.ipk |
| 00:26.04 | rob__ | SIGSEGV |
| 00:26.16 | clem | and if you do have this version, I really think you should consider to upgrade it, since it's often buggy ;) |
| 00:26.16 | rob__ | im guessing SIGSEGV isnt a good thing? |
| 00:26.21 | clem | more details here: http://dudu.dyn.2-h.org/nist/ipaq.php#t3.3 |
| 00:26.32 | clem | it's the bugginess I was starting to talk about ;) |
| 00:26.39 | rob__ | lol |
| 00:26.40 | clem | err not the right sublink |
| 00:26.41 | rob__ | yeah |
| 00:26.51 | rob__ | well thats good then :( |
| 00:27.01 | rob__ | xirc -- my drivers :( |
| 00:27.06 | clem | here, it's quite documented: http://dudu.dyn.2-h.org/nist/ipaq.php#ipkgFix |
| 00:27.09 | clem | see ya! |
| 00:27.26 | clem | :) |
| 01:28.49 | *** join/#familiar cwa (~chris@ool-43514ebb.dyn.optonline.net) |
| 01:29.01 | cwa | anybody know if you can run linux on the ipaq 4155 |