| 01:28.07 | *** join/#handhelds Thrae (~ircuser@generalmx-1-pt.tunnel.tserv13.ash1.ipv6.he.net) |
| 06:25.42 | *** join/#handhelds martchukov (~antonm@algol.ru-spb-hm.net.martchukov.com) |
| 06:48.58 | *** join/#handhelds MattEMatt (~matt@cpe-67-246-101-212.twcny.res.rr.com) |
| 07:00.39 | aquadran | MattEMatt: any luck to get pda working ? |
| 07:01.24 | MattEMatt | negitive I got no output whatsoever on the serial port (serial debug i believe it was called) |
| 07:04.01 | MattEMatt | I ended up trying pretty much every combo I could come up with. |
| 07:10.16 | aquadran | tried 38400 and 115200 ? |
| 07:10.47 | MattEMatt | yup, and 19200,9600 |
| 07:11.12 | MattEMatt | 8n1 no flow control (hardware or software) |
| 07:13.02 | aquadran | and you have two leds on ? |
| 07:13.10 | MattEMatt | yup |
| 07:13.19 | aquadran | leds i think are software controlled |
| 07:13.50 | aquadran | there is some tests over jtag which switch leds |
| 07:13.58 | MattEMatt | yeah I haven't found much info on them.... all I know is they come on when there is no bootloader |
| 07:14.12 | aquadran | so i guess first loader is still there |
| 07:14.47 | MattEMatt | I'm going to assemble a jtag cable tonight I think |
| 07:15.06 | aquadran | yes, you should |
| 07:16.28 | aquadran | i suggest instead solder wires but small gold pins connector for 2x5 pins |
| 07:16.37 | aquadran | and then wires |
| 07:17.20 | aquadran | solder directly to pads always risk destroy pads |
| 07:22.24 | MattEMatt | not sure I understand what you are getting at... I'm assuming that you are suggesting not soldering to the pads on the 2215 board |
| 07:25.10 | aquadran | you can pull by accedent wire and destroy pad, it's quite easy. with such connector it's very strong. |
| 07:25.23 | aquadran | http://download.maritex.com.pl/pdfs/co/PLHDXXs.pdf |
| 07:25.31 | aquadran | i think it's 1.27 mm |
| 07:26.40 | MattEMatt | AHHH okay, i gotcha |
| 07:26.55 | MattEMatt | I'll have to see what I have kickin around |
| 07:31.06 | aquadran | and TRST must be no connected if you using that lpt jtag |
| 07:32.47 | aquadran | and you need solder two points on bords, it's place where is not soldered resistor or condesator to make jtag to work |
| 07:33.21 | aquadran | also jtag to cpu, not asic |
| 07:38.45 | mzb | got serial output enabled on the command line? |
| 07:39.17 | mzb | depending on the source for your kernel, the default arguments may not be what you expect |
| 07:39.29 | mzb | kernel config is the only way to tell for sure |
| 07:40.10 | mzb | there's also a possibility if it IS working that there's no getty on the serial port ... which won't help you much either ;) |
| 07:40.34 | MattEMatt | yeah I honestly don't remember which I loaded on it last |
| 07:41.28 | aquadran | MattEMatt: tried without battery ? |
| 07:41.38 | aquadran | how leds react |
| 07:43.59 | MattEMatt | when plugging into serial with no battery, nothing happens |
| 07:44.12 | MattEMatt | USB, let me check |
| 07:44.27 | aquadran | make sure button is pressed at near battery |
| 07:44.51 | MattEMatt | like the battery door is closed correct? |
| 07:44.55 | aquadran | that one from battery door |
| 07:45.00 | aquadran | yes |
| 07:45.01 | MattEMatt | k |
| 07:46.50 | MattEMatt | nada |
| 07:47.18 | MattEMatt | if i power it externally the lights come on... but thats probably doing the same as the battery |
| 08:19.07 | aquadran | MattEMatt: i don't undestand you. the same thing as with/out battery when it's powered externally ? |
| 08:20.14 | MattEMatt | yes, just 2 lihgts come on, and no response from any serial debugging |
| 08:21.23 | MattEMatt | I have not yet completed my jtag cable |
| 08:21.31 | MattEMatt | (working on it as we speak) |
| 08:22.21 | *** join/#handhelds tris (tristan@2001:1868:a00a::4) |
| 09:04.36 | MattEMatt | okay, one row of pins is done... |
| 09:11.51 | *** join/#handhelds tris (tristan@2001:1868:a00a::4) |
| 09:13.44 | aquadran | top board from bottom: nc, tdo, tck, tms, trst(nc in this case) |
| 09:14.06 | aquadran | other side: nc, nc, tdi, nc, nc |
| 09:14.31 | aquadran | ah i think miss gnd |
| 09:14.51 | aquadran | other side: gnd, nc, tdi, nc, nc |
| 09:15.49 | aquadran | so you need only 5 wires |
| 09:50.54 | *** join/#handhelds MattEMatt (~matt@cpe-67-246-101-212.twcny.res.rr.com) |
| 09:51.40 | MattEMatt | cool. after a bit of mucking around, and testing all connections... looks like im good... |
| 09:52.05 | MattEMatt | when you say from bottom, I am assuming you mean from the end closest to the battery |
| 10:35.38 | aquadran | i mean when you look at pda from front |
| 10:35.53 | MattEMatt | gotcha |
| 10:35.56 | aquadran | so at right of side you have connector |
| 10:36.00 | aquadran | jtag |
| 10:36.05 | MattEMatt | k |
| 10:36.21 | MattEMatt | any of those NCs ground? |
| 10:36.50 | aquadran | i mean no connect them |
| 10:37.07 | aquadran | they are not gnd |
| 10:37.38 | MattEMatt | mkay |
| 10:38.09 | aquadran | you need make connection on board |
| 10:38.38 | MattEMatt | okay, I'll find one |
| 10:38.43 | aquadran | let me upload photo, which joshua made once |
| 10:38.59 | MattEMatt | k |
| 10:40.05 | aquadran | http://dl.dropbox.com/u/12617418/h2210-annotated.png |
| 10:43.35 | MattEMatt | should I connect both pads like that? |
| 10:43.53 | aquadran | yes |
| 10:45.01 | aquadran | http://web.archive.org/web/20090628205835/http://www.handhelds.org/projects/h2200.html |
| 10:45.10 | aquadran | verify with this |
| 10:45.25 | aquadran | however it has bug |
| 10:45.49 | aquadran | i mean verify pin position, |
| 10:46.56 | aquadran | on front side are 1,3,5,7,9 back side 2,4,6,8,10 |
| 10:48.08 | aquadran | on this page pin 3: TDO-ASIC should be tdo-cpu |
| 10:49.59 | MattEMatt | ::nods:: looks good |
| 10:50.17 | aquadran | http://dl.dropbox.com/u/12617418/hamcop.tgz |
| 10:50.19 | MattEMatt | okay, I am going to get some sleep, and I will attack this tomorrow night :) |
| 10:50.31 | aquadran | ok, good night :) |
| 10:51.00 | MattEMatt | thanks again! |
| 10:51.07 | MattEMatt | got that file |
| 23:38.41 | *** join/#handhelds dijenerate (~dijenerat@204.212.240.159) |
