| 00:00.24 | renatostore | usb0: no IPv6 routers present |
| 00:00.25 | renatostore | usb 3-1: USB disconnect, address 7 |
| 00:00.25 | renatostore | usb0: unregister 'cdc_subset' usb-0000:00:10.2-1, Linux Device |
| 00:00.25 | renatostore | usb 3-1: new full speed USB device using uhci_hcd and address 8 |
| 00:00.25 | renatostore | usb 3-1: configuration #1 chosen from 2 choices |
| 00:00.26 | renatostore | usb0: register 'cdc_subset' at usb-0000:00:10.2-1, Linux Device, be:e0:5f:30:fd:6e |
| 00:00.41 | renatostore | this is dmesg |
| 00:00.45 | renatostore | on my pc |
| 00:01.07 | cr2 | renatostore: is your eth0 also 192.168.0.* ? |
| 00:01.08 | BabelO | renatostore:type route and look at the ouput |
| 00:02.02 | renatostore | my eth0 is 192.168.178.* |
| 00:02.09 | cr2 | ok. |
| 00:02.32 | renatostore | Kernel IP routing table |
| 00:02.32 | renatostore | Destination Gateway Genmask Flags Metric Ref Use Iface |
| 00:02.32 | renatostore | 192.168.178.0 * 255.255.255.0 U 0 0 0 eth0 |
| 00:02.32 | renatostore | default fritz.fonwlan.b 0.0.0.0 UG 0 0 0 eth0 |
| 00:02.38 | renatostore | this is route |
| 00:02.52 | cr2 | where is your usb ? |
| 00:03.27 | renatostore | Kernel IP routing table |
| 00:03.27 | renatostore | Destination Gateway Genmask Flags Metric Ref Use Iface |
| 00:03.27 | renatostore | 192.168.178.0 * 255.255.255.0 U 0 0 0 eth0 |
| 00:03.27 | renatostore | 192.168.0.0 * 255.255.255.0 U 0 0 0 usb0 |
| 00:03.27 | renatostore | default fritz.fonwlan.b 0.0.0.0 UG 0 0 0 eth0 |
| 00:03.31 | renatostore | sorry |
| 00:03.56 | cr2 | ok. |
| 00:04.00 | cr2 | 00:43] <renatostore> RX packets:0 errors:8984 dropped:0 overruns:0 frame:0 |
| 00:04.00 | cr2 | [00:43] <renatostore> TX packets:0 errors:20 dropped:0 overruns:0 carrier:0 |
| 00:04.19 | cr2 | hmm. |
| 00:05.20 | renatostore | i cant softreset during install |
| 00:06.01 | cr2 | i'll look at the defconfig again. |
| 00:06.22 | renatostore | what do you think |
| 00:06.24 | renatostore | ? |
| 00:08.09 | renatostore | about the error |
| 00:09.01 | cr2 | hmm |
| 00:09.04 | cr2 | <M> Ethernet Gadget (with CDC Ethernet support) |
| 00:09.39 | cr2 | and it's not installed. but you are using the modules from universal, obviously. |
| 00:12.42 | cr2 | i'll remove RNDIS from the config. don't know if it will help. |
| 00:15.05 | cr2 | ok, update the CVS. pxa27x_udc is compiled into the kernel now. |
| 00:31.50 | renatostore | ok. i can ping now |
| 00:32.05 | cr2 | great. |
| 00:32.09 | cr2 | can you ssh ? |
| 00:32.42 | renatostore | yes |
| 00:32.58 | renatostore | but the passwod |
| 00:33.03 | renatostore | ? |
| 00:34.04 | cr2 | no password, just press enter. |
| 00:34.18 | renatostore | and now? |
| 00:34.32 | cr2 | cd /dev/input |
| 00:34.36 | cr2 | ls -l |
| 00:35.00 | renatostore | crw-rw---- 1 root root 13, 63 Jan 2 1995 mice |
| 00:35.11 | cr2 | no event0 ? |
| 00:35.16 | renatostore | no |
| 00:35.23 | cr2 | ok. |
| 00:35.38 | cr2 | look in the dmesg. do you have tsc2046-ts ? |
| 00:35.48 | cr2 | cat /proc/interrupts |
| 00:36.36 | renatostore | root@htcuniversal:/dev/input$ cat /proc/interrupts |
| 00:36.36 | renatostore | <PROTECTED> |
| 00:36.36 | renatostore | <PROTECTED> |
| 00:36.36 | renatostore | <PROTECTED> |
| 00:36.36 | renatostore | <PROTECTED> |
| 00:36.37 | renatostore | <PROTECTED> |
| 00:36.41 | renatostore | <PROTECTED> |
| 00:36.42 | ljp | BabelO: those functions are loaded as a server task. See etc/Tasks.cfg. the greenphone has an entry 'All' under [startup] that loads those |
| 00:36.43 | renatostore | <PROTECTED> |
| 00:36.45 | renatostore | <PROTECTED> |
| 00:36.47 | renatostore | <PROTECTED> |
| 00:36.49 | renatostore | <PROTECTED> |
| 00:36.51 | renatostore | Err: 0 |
| 00:37.17 | cr2 | ok. i'll look in the source. |
| 00:38.57 | BabelO | ljp: thanks, i have to look for how to compile it in devices tree |
| 00:42.24 | renatostore | cr2: if it is long we can finish tomorrow |
| 00:42.59 | cr2 | don't know. |
| 00:43.43 | cr2 | ah. |
| 00:43.47 | cr2 | <PROTECTED> |
| 00:43.47 | cr2 | <PROTECTED> |
| 00:43.47 | cr2 | <PROTECTED> |
| 00:45.03 | cr2 | static struct platform_device htcalpine_ts = { |
| 00:45.03 | cr2 | <PROTECTED> |
| 00:45.18 | cr2 | i'll name it htcuniversal. |
| 00:46.48 | cr2 | ok, updated. |
| 00:47.26 | renatostore | tomorrow ... good night |
| 00:47.33 | cr2 | f$%&/. we should use the generic driver. |
| 00:48.13 | cr2 | but 2 bugs squashed. good. |
| 00:48.47 | psokolovsky | cr2, what about himalaya? it needs update to tsc2200 soc too (a-la BA) |
| 00:54.11 | cr2 | psokolovsky: i don't have the device, and i think blueangel should be finished first. |
| 00:54.23 | cr2 | they are very similar. |
| 00:55.15 | psokolovsky | cr2, yep, that's what I mean. if someone propogated BA changes to himalaya... ;-) |
| 00:55.37 | Kevin2 | Hi |
| 00:58.23 | psokolovsky | Hi Kevin2! |
| 00:59.16 | Kevin2 | Hi psokolovsky |
| 01:02.52 | Kevin2 | I sent the mmu table that goxboxlive is seeing on the h5500. I'm a bit of a loss to understand what is happening. psokolovsky / cr2 can you take a look at it and see if it makes any sense to you? |
| 01:03.41 | psokolovsky | Kevin2, did goxboxlive try latest haret from HEAD? |
| 01:03.53 | Kevin2 | psokolovsky: Yes. Same problem. |
| 01:05.22 | Kevin2 | The gzip'd log is not from head, however. It also contains a lot of debug statements. You can "grep -v memPhysMap" to remove the bulk of the debug stuff. |
| 01:07.26 | cr2 | Kevin2: is the nk.exe available somewhere ? can he run 'vmalloc' in gnu-haret and post the log ? |
| 01:10.37 | Kevin2 | cr2: I don't know if goxboxlive has tried that. It is a ce3 pda. |
| 01:10.57 | cr2 | vmalloc is portable. |
| 01:11.21 | cr2 | it's virtualalloc+lockpages. should work on 2.0 |
| 01:15.21 | psokolovsky | Kevin2, 1) I never saw Coarse pages before |
| 01:16.53 | psokolovsky | Kevin2, 2) well, on h3900/h4000, I also kinda don't see mapping of loweset 32MB %) |
| 01:17.28 | psokolovsky | I probably should flash ppc2002 to h3900 and see wazzup with it. |
| 01:18.43 | Kevin2 | psokolovsky my pda uses coarse pages. |
| 01:19.26 | psokolovsky | Kevin2, so what made you say it's basicly empty? |
| 01:19.35 | psokolovsky | (h5000 map) |
| 01:20.03 | psokolovsky | Kevin2, also, what about mapping for current process on your devices? |
| 01:20.25 | Kevin2 | There are almost no application pages mapped in. (The 1Meg mappings are there, but almost no 4K pages.) |
| 01:20.27 | psokolovsky | Kevin2, do you have an idea if thats crewy "PID mapping" is always in use by ARMs? |
| 01:20.54 | Kevin2 | psokolovsky: It looks like it -- r13 is set. |
| 01:21.04 | Kevin2 | cp15r13 that is (see top of file). |
| 01:21.26 | psokolovsky | Kevin2, well, then tell me what address I should look at? |
| 01:22.50 | cr2 | psokolovsky: PID is used for 25bit process mapping switches. |
| 01:23.00 | cr2 | even on wince5. |
| 01:23.27 | Kevin2 | r13=20000000 -- so the virtual memory of haret is at 0x20000000. |
| 01:23.50 | Kevin2 | There is a "coarse" page there, but no 4k pages. Which doesn't make any sense, because the app itself wouldn't have its code pages even mapped in. |
| 01:28.21 | psokolovsky | Kevin2, well, I'm afraid I no too liitle about ARM virtmem to say anything useful... |
| 01:35.22 | cr2 | good night. |
| 01:38.39 | Kevin2 | Good night |
| 01:57.47 | *** join/#htc-linux Hawk|- (n=Hawk@p57A54020.dip0.t-ipconnect.de) |
| 02:37.41 | *** join/#htc-linux phongred (n=phongred@203.113.144.83) |
| 02:37.54 | phongred | hi all |
| 02:38.21 | phongred | my name Phong,from vietnam |
| 02:38.43 | phongred | i'm using HTC O2s Phone |
| 02:39.07 | phongred | i want run Linux,can u help me? |
| 02:39.12 | phongred | thanks you |
| 02:42.15 | phongred | hello |
| 02:42.29 | _scatterp | hi |
| 02:42.36 | _scatterp | is it the htc universal ? |
| 02:42.42 | _scatterp | your in the right place here |
| 02:43.08 | _scatterp | http://images.google.co.cr/images?hl=es&q=htc%20universal&ie=UTF-8&oe=UTF-8&sa=N&tab=wi |
| 02:43.12 | _scatterp | this phone ? |
| 02:43.18 | phongred | i using BluAngel |
| 02:43.32 | phongred | O2s (BlueAngel |
| 02:43.39 | _scatterp | ok i can not help with that more than tell you your in the right place and it can have linux |
| 02:43.44 | _scatterp | you need to wait for some one |
| 02:43.53 | _scatterp | well actualy no one will be here |
| 02:43.56 | _scatterp | come back tommorow |
| 02:43.58 | _scatterp | but more early |
| 02:44.03 | phongred | yes thanks |
| 02:44.06 | _scatterp | ok cya |
| 02:44.08 | _scatterp | :) |
| 02:44.08 | phongred | see you soon |
| 02:44.12 | phongred | lol |
| 05:46.48 | *** join/#htc-linux phongred (n=phongred@203.113.144.83) |
| 07:06.07 | *** join/#htc-linux goxboxlive (n=goxboxli@195.159.97.196) |
| 07:29.37 | *** join/#htc-linux Ralith (n=ralith@soggy202.drizzle.com) |
| 08:15.52 | *** join/#htc-linux Hawk|- (n=Hawk@p57A54020.dip0.t-ipconnect.de) |
| 08:53.25 | *** join/#htc-linux TripleDES (n=sergio@89.129.136.254) |
| 09:20.04 | *** join/#htc-linux BobOfDoom (i=ato@2002:d209:8c44:0:0:0:0:1) |
| 10:03.17 | *** join/#htc-linux pH5 (n=ph5@e178247013.adsl.alicedsl.de) |
| 10:39.20 | *** join/#htc-linux FossiFoo (n=Fossi@e176105051.adsl.alicedsl.de) |
| 10:51.48 | *** join/#htc-linux LunohoD (n=alex@e180127080.adsl.alicedsl.de) |
| 11:15.53 | *** join/#htc-linux tudenbart (n=willi@xdsl-81-173-174-168.netcologne.de) |
| 11:56.30 | *** join/#htc-linux jeanseb (n=jeanseb@88.164.32.155) |
| 11:58.04 | *** join/#htc-linux pleemans (n=peter@d51A5E612.access.telenet.be) |
| 12:08.08 | *** join/#htc-linux RoEn_PC (n=roen@p54A6713F.dip.t-dialin.net) |
| 12:39.16 | *** join/#htc-linux \bash (n=sps@95.pool85-53-8.dynamic.orange.es) |
| 12:41.39 | \bash | Hi, I have a simple question, is it possible to boot linux just executing haret.exe or do I have to enter into a special bootloader mode? |
| 12:43.29 | \bash | And another one, I have compiled an ARM kernel, and the last lines of make were: OBJCOPY arch/arm/boot/xipImage |
| 12:43.29 | \bash | <PROTECTED> |
| 12:43.29 | \bash | <PROTECTED> |
| 12:43.58 | \bash | but haret said: |
| 12:44.01 | \bash | HaRET(1)# bootlinux |
| 12:44.01 | \bash | Physical kernel address: a0008000 |
| 12:44.01 | \bash | WARNING: page 0 has addr 31eb5000, target addr a0008000, retrying |
| 12:44.01 | \bash | WARNING: page 0 has addr 31a0c000, target addr a0008000, retrying |
| 12:44.01 | \bash | WARNING: page 0 has addr 31562000, target addr a0008000, retrying |
| 12:44.02 | \bash | WARNING: page 0 has addr 310b9000, target addr a0008000, retrying |
| 12:44.03 | \bash | FATAL: Not enough memory for kernel bundle! |
| 12:44.05 | \bash | HaRET(2)# |
| 12:44.45 | \bash | any tip? |
| 12:45.21 | pH5 | \bash: just executing haret. what is the size of your xipImage? I think there is an upper limit |
| 12:57.59 | \bash | 6MB |
| 12:58.12 | \bash | I also tried with an smaller xImage |
| 12:58.16 | \bash | zImage |
| 12:58.19 | \bash | 1.2MB |
| 12:58.45 | \bash | thanks for your answer |
| 12:59.12 | \bash | I will try remove more things from my kernel, |
| 13:00.06 | *** join/#htc-linux VisN (n=VisualN@ip227.131.adsl.wplus.ru) |
| 13:01.08 | \bash | Do I have to adjust [*] Kernel Execute-In-Place from ROM x x |
| 13:01.09 | \bash | <PROTECTED> |
| 13:03.20 | pH5 | i think i read yesterday that kernel+initrd have to be < 4MB in size for some reason |
| 13:03.51 | pH5 | XIP is not needed at all, as haret loads the kernel into ram |
| 13:04.11 | \bash | ok |
| 13:04.20 | \bash | I'm going to disable Xip |
| 13:06.43 | \bash | by the way, I'm trying to boot an htc hermes, which currently isn't supported, I think I will have more problems, but I will be happy if at least I see the kernel init function start |
| 13:13.48 | cr2 | \bash: have you already studied the serial port settings ? |
| 13:14.27 | \bash | I don't have a serial cable |
| 13:15.09 | \bash | I planned to make irda work |
| 13:15.10 | cr2 | nobody has it ;) but the 3 serial ports have some assignments. |
| 13:15.30 | \bash | I suppouse |
| 13:15.43 | cr2 | we need to check where is the gsm/umts port, and IR. |
| 13:15.43 | \bash | gsm processor and so on |
| 13:16.18 | cr2 | you can't boot under certain conditions. |
| 13:16.49 | \bash | so, we have to find out those settings debugging with haret? |
| 13:16.54 | cr2 | hmm. are you in haret now ? can you dump 6 regs ? |
| 13:17.03 | \bash | 1 second |
| 13:17.38 | cr2 | i've written some haret support function code for it, but can't test it now. |
| 13:18.01 | \bash | if you tell me the commands to launch |
| 13:18.29 | cr2 | pd 0x50000000 4 |
| 13:18.44 | cr2 | pd 0x50000004 4 |
| 13:18.47 | \bash | HaRET(1)# pd 0x50000000 4 |
| 13:18.47 | \bash | 50000000 | 00000000 | .... |
| 13:18.47 | \bash | HaRET(2)# |
| 13:19.01 | cr2 | pd 0x50004000 4 |
| 13:19.09 | cr2 | pd 0x50004004 4 |
| 13:19.19 | cr2 | pd 0x50008000 4 |
| 13:19.28 | cr2 | pd 0x50008004 4 |
| 13:20.02 | \bash | HaRET(1)# pd 0x50000000 4 |
| 13:20.04 | \bash | 50000000 | 00000000 | .... |
| 13:20.04 | \bash | HaRET(2)# pd 0x50000004 4 |
| 13:20.04 | \bash | 50000004 | 00000000 | .... |
| 13:20.04 | \bash | HaRET(3)# pd 0x50004000 |
| 13:20.04 | \bash | line 3: Expected <vaddr> <size> |
| 13:20.05 | \bash | HaRET(4)# pd 0x50004000 4 |
| 13:20.07 | \bash | 50004000 | 00000003 | .... |
| 13:20.09 | \bash | HaRET(5)# pd 0x50004004 |
| 13:20.11 | \bash | line 5: Expected <vaddr> <size> |
| 13:20.13 | \bash | HaRET(6)# pd 0x50004004 4 |
| 13:20.17 | \bash | 50004004 | 00000fc5 | .... |
| 13:20.20 | \bash | HaRET(7)# pd 0x50008000 4 |
| 13:20.21 | \bash | 50008000 | 00000003 | .... |
| 13:20.23 | \bash | HaRET(8)# pd 0x50008004 4 |
| 13:20.25 | \bash | 50008004 | 00008fc5 | .... |
| 13:20.40 | cr2 | ok. |
| 13:20.43 | \bash | what are these values? |
| 13:20.44 | *** join/#htc-linux BobOfDoom (i=ato@2002:d209:88e4:0:0:0:0:1) |
| 13:21.07 | cr2 | seems that the port 0 is unused. |
| 13:21.29 | cr2 | UART control registers. |
| 13:21.34 | \bash | ah |
| 13:21.37 | \bash | ok |
| 13:22.02 | cr2 | can you also dump the 3 +0x28 reg ? |
| 13:22.14 | cr2 | pd 0x50000028 4 |
| 13:22.18 | \bash | so, the kernel printks can go to serial port 0 safely? |
| 13:22.33 | \bash | 50000028 | 00000000 |
| 13:22.35 | cr2 | no, they may hang. |
| 13:22.42 | cr2 | pd 0x50004028 4 |
| 13:22.45 | cr2 | pd 0x50008028 4 |
| 13:23.15 | \bash | HaRET(15)# pd 0x50004028 4 |
| 13:23.16 | \bash | 50004028 | 00000017 | .... |
| 13:23.16 | \bash | HaRET(16)# pd 0x50008028 4 |
| 13:23.16 | \bash | 50008028 | 00000144 | D... |
| 13:23.22 | cr2 | it's better do disable the serial printks completely. |
| 13:23.33 | \bash | ok |
| 13:23.39 | cr2 | and write to the framebuffer ram. |
| 13:23.50 | \bash | So, how do we see those printks? |
| 13:23.52 | \bash | ok |
| 13:23.57 | \bash | the driver works? |
| 13:24.16 | cr2 | ok, thanks. now i should look into the cpu manual. |
| 13:24.20 | cr2 | it's vsfb. |
| 13:24.26 | \bash | ok |
| 13:24.41 | cr2 | and it's already setup. |
| 13:24.41 | \bash | I have recompiled, I'm gona give it a try |
| 13:24.45 | cr2 | ok. |
| 13:25.30 | cr2 | the problem are the early decompression messages. |
| 13:25.41 | \bash | aha |
| 13:25.42 | cr2 | Decompressing Linux........................... |
| 13:25.47 | \bash | I know |
| 13:25.56 | cr2 | you should disable them. |
| 13:26.01 | \bash | but it should be safe to send it to irda prot |
| 13:26.06 | \bash | port |
| 13:26.13 | cr2 | they are sent to the serial port, and may hang. |
| 13:26.37 | cr2 | yes, but you should setup the port in wince before jumping to the zimage decompress code. |
| 13:26.57 | cr2 | irda should be 9600 |
| 13:27.04 | \bash | ok |
| 13:27.05 | cr2 | and the phone 115200 |
| 13:27.08 | cr2 | my guesses. |
| 13:27.31 | cr2 | these are the +0x28 divisor settings, i need to check them. |
| 13:28.20 | cr2 | 0x17+1=0x18=16+8=24 |
| 13:29.09 | \bash | I think I need to see a manual which describes all those registers |
| 13:29.11 | cr2 | 24*16*baudrate=UARTCLK |
| 13:29.28 | \bash | I haven't done that homework |
| 13:29.29 | cr2 | hmm. there are 3 options for UARTCLK setup... |
| 13:29.30 | \bash | :D |
| 13:29.38 | cr2 | ok. |
| 13:30.11 | cr2 | 0x144+1=0x145 |
| 13:30.32 | \bash | HaRET(1)# bootlinux |
| 13:30.32 | \bash | Physical kernel address: a0008000 |
| 13:30.33 | \bash | WARNING: page 0 has addr 320e2000, target addr a0008000, retrying |
| 13:30.33 | \bash | WARNING: page 0 has addr 31bfa000, target addr a0008000, retrying |
| 13:30.33 | \bash | WARNING: page 0 has addr 31713000, target addr a0008000, retrying |
| 13:30.33 | \bash | WARNING: page 0 has addr 3122b000, target addr a0008000, retrying |
| 13:30.35 | \bash | FATAL: Not enough memory for kernel bundle! |
| 13:30.40 | cr2 | =325 |
| 13:30.47 | \bash | My zimage was 1.5MB |
| 13:31.11 | cr2 | 325 vs. 24, is it the same as 115200 vs. 9600 ? |
| 13:31.41 | \bash | Hugs.Base> 115200 / 9600 |
| 13:31.42 | cr2 | i wonder why Kevin2 does not use AllocPhysMem when available. |
| 13:31.42 | \bash | 12.0 |
| 13:31.42 | \bash | Hugs.Base> 325 / 24 |
| 13:31.42 | \bash | 13.5416666666667 |
| 13:32.11 | \bash | I'm not following those thoughts |
| 13:32.28 | cr2 | WARNING: page 0 has addr 320e2000, target addr a0008000, retrying |
| 13:32.43 | cr2 | it's too low in RAM ?? |
| 13:32.50 | \bash | all of them point to the same target addr |
| 13:32.59 | cr2 | but it's 32MB+ |
| 13:33.31 | cr2 | i need to look at the haret source. |
| 13:35.32 | \bash | what patches are you applying to the kernel? where can I find the pdf documents about cpu and peripherals registers? |
| 13:36.22 | cr2 | http://www.samsung.com/Products/Semiconductor/MobileSoC/ApplicationProcessor/ARM9Series/SC32442/SC32442A45_Users_Manual_Rev11.pdf |
| 13:36.32 | \bash | thanks |
| 13:36.38 | cr2 | the kernel is the htchermes_defconfig in hh.org CVS |
| 13:38.59 | \bash | hh.org? |
| 13:39.16 | cr2 | handhelds.org |
| 13:39.21 | \bash | ah |
| 13:39.21 | \bash | ok |
| 13:39.50 | \bash | i'm gona download it |
| 13:42.58 | Kevin2 | \bash - try using latest haret. |
| 13:44.13 | \bash | pre-0.4.6 is acceptable? |
| 13:45.59 | \bash | boot KERNEL=zimage INITRD=initrd |
| 13:45.59 | \bash | Opening file zimage |
| 13:45.59 | \bash | Opening file initrd |
| 13:45.59 | \bash | boot MTYPE=1213 CMDLINE='root=/dev/ram0 ro console=tty0' |
| 13:45.59 | \bash | Page at 00400000 not mapped |
| 13:45.59 | Kevin2 | Use http://www.handhelds.org/~koconnor/haret/haret-20070105.exe |
| 13:46.05 | \bash | ok |
| 13:46.07 | \bash | i'm going |
| 13:46.43 | Kevin2 | Which device do you have? |
| 13:48.38 | \bash | htc hermes |
| 13:48.55 | \bash | orange spv 3100 |
| 13:49.20 | cr2 | vodafone something. |
| 13:49.30 | \bash | orange |
| 13:49.48 | \bash | HaRET(1)# bootlinux |
| 13:49.48 | \bash | boot KERNEL=zimage INITRD=initrd |
| 13:49.48 | \bash | Opening file zimage |
| 13:49.48 | \bash | Opening file initrd |
| 13:49.48 | \bash | boot params: RAMADDR=30000000 RAMSIZE=07000000 MTYPE=1213 CMDLINE='root=/dev/ram0 ro console=tty0' |
| 13:49.49 | \bash | Boot FB feedback: 1 |
| 13:49.51 | \bash | Allocated load buffer at 00280020 of size 004ea000 |
| 13:49.53 | \bash | Built virtual to physical page mapping |
| 13:49.55 | \bash | Allocated 1257 pages (tags=00281000/320bb000 kernel=00282000/320bc000 initrd=006A8000/322e1000 index=00335000/32654000) |
| 13:49.58 | \bash | Built kernel tags area |
| 13:50.00 | \bash | Built page index |
| 13:50.02 | \bash | Video buffer at phys=10800000 |
| 13:50.04 | \bash | preload=700@00331000/32658000 sj=00331000 stack=00333000/32656000 data=00332000/32657000 exec=3265816c |
| 13:50.06 | \bash | Reading 1507168 bytes... |
| 13:50.08 | \bash | Read complete |
| 13:50.10 | \bash | Reading 3615275 bytes... |
| 13:50.12 | \bash | Read complete |
| 13:50.14 | \bash | Launching to physical address 3265800c |
| 13:50.18 | \bash | I saw lines in the screen |
| 13:50.22 | \bash | and it rebooted |
| 13:50.49 | \bash | I'm going to download your kernel |
| 13:51.32 | \bash | <PROTECTED> |
| 13:51.35 | Kevin2 | The lines drawn to the screen will help determine if the haret was able to successfully relocate the kernel. |
| 13:51.43 | *** join/#htc-linux g3gg0_ (n=g3gg0@ppp-82-135-70-216.dynamic.mnet-online.de) |
| 13:51.46 | Kevin2 | I'm off to work - bye. |
| 13:51.53 | \bash | ok |
| 13:51.57 | \bash | thanks |
| 13:53.14 | \bash | This will take a lot of time to download |
| 14:03.18 | *** join/#htc-linux parmaster (i=par@dipole.idlepattern.com) |
| 14:06.18 | *** join/#htc-linux TripleDES (n=sergio@89.129.136.254) |
| 14:43.28 | cr2 | samsung cpu is a PITA compared to pxa ;) |
| 14:49.53 | cr2 | FCLK=400MHz /44 |
| 14:49.59 | cr2 | hmm. confusing. |
| 14:59.10 | \bash | well, i'm still downloading the cvs kernel |
| 15:02.28 | cr2 | 8bit,no parity, clock is 400MHz/44. then i don't understand 0x17 and 0x144 divisors. |
| 15:02.46 | cr2 | do you have IR enabled ? the serial port's IR bit is off. |
| 15:04.18 | cr2 | i'd like to see the divisor settings with IR and phone enabled. |
| 15:04.22 | kimuSan^ | cr2: have you allready decoded it ? |
| 15:07.51 | cr2 | kimuSan^: manually, but the divisor does not make sense. |
| 15:08.21 | cr2 | can you dump the 0x5000[048]028 reg too ? |
| 15:10.16 | cr2 | and |
| 15:10.31 | cr2 | pd 0x59000000 0x34 |
| 15:17.24 | kimuSan^ | gaah how can I see my IP when connected via activesync? |
| 15:17.25 | *** join/#htc-linux progeny (n=progeny@asterx.upc.es) |
| 15:21.50 | kimuSan^ | cr2: I have to do it tonight. im on a lame windows box right now. cant do anything her |
| 15:25.22 | cr2 | netstat ? route ? |
| 15:26.11 | VisN | after running linux on my qtek s110 from SD card by this manual - http://userpage.fu-berlin.de/~zabel/magician/README, I could start windows only by Hard reset :( why? |
| 15:26.30 | cr2 | RAM is wiped. |
| 15:27.10 | cr2 | hehe. no wince5 for magician. |
| 15:27.40 | VisN | How to avoid it for next time? |
| 15:28.02 | cr2 | avoid what ? |
| 15:28.26 | VisN | RAM wiped |
| 15:29.02 | cr2 | do not run linux :) |
| 15:29.52 | VisN | Only in such a way? |
| 15:29.54 | cr2 | it's nearly impossible to avoid. probably can be done, but is completely unfeasible. |
| 15:30.14 | VisN | ok |
| 15:35.05 | kimuSan^ | cr2: the comp locks out the network that the pda get on. |
| 15:35.17 | kimuSan^ | corp security stuff |
| 15:35.35 | kimuSan^ | off for now |
| 15:41.01 | *** join/#htc-linux rpodgorny (n=rpodgorn@180.129.broadband3.iol.cz) |
| 15:42.07 | rpodgorny | Hi! Is Roy (who wrote me) here? |
| 15:47.53 | *** join/#htc-linux goxboxlive (n=goxboxli@9.80-202-160.nextgentel.com) |
| 15:58.29 | *** join/#htc-linux FossiFoo (n=Fossi@e176105051.adsl.alicedsl.de) |
| 16:15.46 | *** part/#htc-linux pH5 (n=ph5@e178247013.adsl.alicedsl.de) |
| 16:15.55 | *** join/#htc-linux pH5 (n=ph5@e178247013.adsl.alicedsl.de) |
| 16:16.45 | *** join/#htc-linux Ralith (n=ralith@66.150.12.86) |
| 16:27.58 | goxboxlive | cr2: HAs Universal this? #define QTOPIA_MUX_DATA_DEVICE " |
| 16:37.44 | *** join/#htc-linux rmoravcik (n=rmoravci@icm3-orange.orange.sk) |
| 16:39.30 | *** join/#htc-linux ellisway (n=ellis@host-87-74-241-174.bulldogdsl.com) |
| 16:44.44 | *** join/#htc-linux babel_work (n=Fabrice@faim1.itesoft.com) |
| 16:44.59 | babel_work | hi goxboxlive |
| 16:45.14 | cr2 | goxboxlive: not yet, but you can try it with the USB-host-serial |
| 16:45.27 | goxboxlive | hi babel_work |
| 16:45.30 | goxboxlive | hi cr2, ok |
| 16:45.51 | babel_work | QTOPIA_MUX_DATA_DEVICE is for BA because GPRS data are on ttyS8 and to start GPRS connection we need some at command on ttyS1 |
| 16:46.06 | goxboxlive | cr2: So it will not be #define QTOPIA_MUX_DATA_DEVICE "/dev/ttyS0" ? |
| 16:46.37 | goxboxlive | I should point it to /dev/ttyUSB0 right? |
| 16:46.52 | goxboxlive | i c |
| 16:47.40 | cr2 | babel_work: did you check the GPRS ? |
| 16:47.54 | goxboxlive | Babel_work: Wich file breakes the compilation when it tries to compile "scrible"? |
| 16:48.31 | babel_work | cr2yes but doesn't work, i see ipcp trame exchange but no password or login exchange |
| 16:48.36 | cr2 | goxboxlive: hmm. if this device is used for the AT commands, then it should be ttyS0. i can't exclude that we need to do something our own. |
| 16:49.16 | goxboxlive | cr2 ok |
| 16:49.17 | babel_work | goxboxlive : it is mainwindow.cpp in scribble directory, function ::open |
| 16:49.22 | *** join/#htc-linux FossiFoo (n=Fossi@e176122218.adsl.alicedsl.de) |
| 16:49.28 | goxboxlive | babel_work thx |
| 16:49.40 | cr2 | or even create a mux device that will cover |
| 16:49.48 | cr2 | both S0 and USB0 |
| 16:50.10 | babel_work | cr2 : in qtopia there is some example of doing a mux plugin |
| 16:50.42 | babel_work | cr2 http://doc.trolltech.com/qtopia4.2/syscust-gsm.html#gsm-modem-integration |
| 16:50.49 | babel_work | and http://doc.trolltech.com/qtopia4.2/tut-multiplexing.html |
| 16:51.54 | *** join/#htc-linux FossiFoo_ (n=Fossi@e176111154.adsl.alicedsl.de) |
| 16:54.04 | rpodgorny | goxboxlive: Hi! Why do you keep putting the picture into the table? It's so huge it gets out of the screen and the table cells become sa small they are hard to read. Consider putting there a much smaller picture or put this one out of the table or omit it at all (no real need to have the picture in the status page, it should go to "into" or "about device" page) |
| 16:54.37 | rpodgorny | ...i mean the UniversalStatus wiki page |
| 16:55.04 | goxboxlive | Hi rpogonrny |
| 16:55.23 | goxboxlive | I know wich site you mean, but i dont sgare your view. |
| 16:55.33 | goxboxlive | s/sgae/share/ |
| 16:56.10 | rpodgorny | what resolution do you use? |
| 16:56.20 | goxboxlive | Since there are colors in the cells, i mean the text are easier to read as it is, and not as you did it. |
| 16:56.33 | goxboxlive | 1400x1050 |
| 16:56.41 | *** join/#htc-linux Tjikkun (n=tjikkun@ip5451133d.direct-adsl.nl) |
| 16:57.03 | goxboxlive | But, this is not a big deal for me. if you want it that way, just change it back. |
| 16:57.43 | rpodgorny | yeah, the color are cool but i did it because the picture takes half the space and the table get vertically large and almost all the cells become multiline. you have to scroll to see the whole status table |
| 16:57.45 | goxboxlive | I thought that someone had edited it and did it wrong so the picture where below the table with an accident |
| 16:58.02 | goxboxlive | I c |
| 16:58.20 | goxboxlive | Do what ever you want, as i said, no big deal for me |
| 16:58.28 | rpodgorny | well i don't mind neither, i just thought it should be more 1024x768 friendly :-) |
| 16:59.18 | rpodgorny | alright... :-) |
| 17:04.42 | rpodgorny | ok so the page is modified so the table fits to one screen and almost all of the cells are now single line. moved the pic to the "home" page... |
| 17:05.00 | goxboxlive | ok |
| 17:06.48 | goxboxlive | why did you remove the BOLD fonts in half of the table? |
| 17:08.09 | rpodgorny | i didn't |
| 17:09.28 | cr2 | BabelO: 3GPP TS 07.10 multiplexing. this is the biggest question on universal and hermes, if it is used. |
| 17:09.56 | rpodgorny | ah, fixed, a missing ' in the half of the table |
| 17:10.20 | goxboxlive | :-) |
| 17:14.21 | rpodgorny | anyway i like to see the page getting greener and greener, if only blueangel one was a bit greener... :-) |
| 17:18.23 | cr2 | heh. i'm lazy to write the asic3_leds driver for the universal ;) |
| 17:23.00 | rpodgorny | write it for ba then :-) |
| 17:25.10 | pH5 | does anybody have gprs scripts for the ba? |
| 17:29.48 | *** join/#htc-linux renatostore (n=renato4@100-181-119-85.dyn4.digitaleitalia.it) |
| 17:31.31 | renatostore | cr2: hi, where i can put the alpine kernel ? |
| 17:32.20 | renatostore | now touchscreen works |
| 17:33.07 | renatostore | but i have some console error messages |
| 17:34.28 | *** part/#htc-linux renatostore (n=renato4@100-181-119-85.dyn4.digitaleitalia.it) |
| 17:35.09 | *** join/#htc-linux renatostore (n=renato4@100-181-119-85.dyn4.digitaleitalia.it) |
| 17:35.38 | goxboxlive | cr2 Well, dont be, let's make it as complete as posible. |
| 17:39.26 | babel_work | pH5 : here you have a script :) |
| 17:39.30 | babel_work | http://doc.trolltech.com/qtopia4.2/networkservices.html |
| 17:42.05 | *** join/#htc-linux rmoravcik (n=rmoravci@icm8-orange.orange.sk) |
| 17:44.03 | *** part/#htc-linux jeanseb (n=jeanseb@88.164.32.155) |
| 17:46.55 | cr2 | renatostore: you should look at the magician. alpine has a lot of similar hardware. |
| 17:47.45 | cr2 | babel_work: have you already started to write the qtopia modem server for ba ? :) |
| 17:48.34 | cr2 | goxboxlive: i'll try today. |
| 17:49.19 | goxboxlive | cr2: good to hear :-) |
| 17:49.46 | pH5 | I don't understand how to use the gsm data channel. should I send the AT+CG... commands to BTUART and then attach pppd to FFUART? |
| 17:50.03 | goxboxlive | It would be good to have it as complete as posible until OpenMoko arrives with a phone app. |
| 17:50.18 | goxboxlive | And then we can start looking at HTC Athena :-) |
| 17:50.54 | babel_work | cr2 : no i only copy/paste structure |
| 17:51.00 | cr2 | have you already bought it ? or do you have a firmware update. |
| 17:51.35 | cr2 | is there any half-working qtopia for universal ? i'd like to have a look at it. |
| 17:52.33 | renatostore | cr2: how can I upload kernel here - http://jornada820.sf.net/files/uni - ? |
| 17:53.43 | cr2 | renatostore: you can't :) maybe at xda-dev ftp ? |
| 17:55.32 | cr2 | or gnulinux.biz ? |
| 17:56.59 | *** join/#htc-linux rejon (n=rejon@adsl-75-5-124-98.dsl.pltn13.sbcglobal.net) |
| 17:57.33 | *** part/#htc-linux rejon (n=rejon@adsl-75-5-124-98.dsl.pltn13.sbcglobal.net) |
| 17:59.43 | cr2 | renatostore: you can upload it to the handhelds.org wiki |
| 18:01.21 | renatostore | how? |
| 18:02.14 | cr2 | i think wiki supports attachments. |
| 18:04.50 | renatostore | i never did this |
| 18:06.45 | cr2 | me too :) |
| 18:06.46 | *** join/#htc-linux asylumed (n=insanity@196.211.28.91) |
| 18:07.11 | renatostore | but you can upload in http://jornada820.sf.net/files/uni |
| 18:15.32 | *** join/#htc-linux WizMaui (n=WizMaui@62.112.90.231) |
| 18:18.30 | cr2 | i used it before because there was no better option. now i have removed most of this stuff from there, and will remove all soon. |
| 18:19.16 | cr2 | goxboxlive: what about hosting other zimages at gnulinux.biz ? |
| 18:21.33 | cr2 | pH5: do you know of any recent pxa27x_udc patches ? |
| 18:21.36 | cr2 | drivers/usb/gadget/pxa27x_udc.c: In function ‘pxa27x_ep_alloc_buffer’: |
| 18:21.36 | cr2 | drivers/usb/gadget/pxa27x_udc.c:370: warning: ‘virt_to_bus’ is deprecated (declared at include/asm/memory.h:192) |
| 18:22.01 | cr2 | this message makes me sick since years ;) |
| 18:22.45 | cr2 | foodtime. |
| 18:24.13 | pH5 | cr2: I don't. I think I'm still using an old openzaurus version of the udc patch. |
| 18:26.00 | pH5 | hm.. after I connecting with ATD*99# I am supposed to communicate with the gsm-data channel. but pppd just complains that it can't open the channel and after a timeout I get "+CME ERROR: 150" on gsm-command. |
| 18:28.25 | goxboxlive | cr2: I think that is a good idea to host other images at gnulinux.biz. I doubt Funklord has anything against that. |
| 18:28.29 | cr2 | have you traced ffuart on wince (while running gprs) ? |
| 18:29.16 | cr2 | goxboxlive: i think we need some clever naming scheme for zimages. |
| 18:30.45 | goxboxlive | what is naming schemes? |
| 18:31.11 | pH5 | cr2: good point. I'll do that. |
| 18:31.15 | goxboxlive | Or what do you mean about it. |
| 18:31.25 | pH5 | "zImage-version_machine(-date)" |
| 18:31.32 | pH5 | or something like that? |
| 18:32.09 | goxboxlive | yes i agree, but i think we should have separated folders for the machines as it is today: http://gnulinux.biz/files// |
| 18:35.48 | *** join/#htc-linux jpatota (n=jpatota@utopia.ccs.neu.edu) |
| 18:36.23 | *** part/#htc-linux babel_work (n=Fabrice@faim1.itesoft.com) |
| 18:56.53 | *** join/#htc-linux BabelO (n=Fabrice@lun34-2-82-238-28-28.fbx.proxad.net) |
| 18:57.26 | BabelO | re |
| 18:57.46 | *** join/#htc-linux asylumed (n=insanity@196.211.116.2) |
| 19:00.06 | *** join/#htc-linux rmoravcik (n=rmoravci@icm8-orange.orange.sk) |
| 19:03.21 | pH5 | 002.057920-002.057920 wdata: 08 |
| 19:03.25 | pH5 | 002.059395-002.059451 rdata: 7d 27 7d 22 7d 28 7d 22 e1 d4 7e |
| 19:03.32 | pH5 | 002.090592-002.090843 wdata: 7e ff 7d 23 c0 21 7d 21 7d 20 7d 20 7d 2e 7d 22 7d 26 7d 20 7d 20 7d 20 7d 20 7d 27 7d 22 7d 28 7d 22 dd 31 7e |
| 19:03.51 | pH5 | this is the beginning of the ffuart communication |
| 19:03.56 | BabelO | pH5: so the GPRS script works ? |
| 19:04.11 | pH5 | BabelO: no, I'm not that far |
| 19:04.32 | pH5 | this is a wince trace |
| 19:05.33 | *** join/#htc-linux lilliput (n=Touriste@82-47-214-88.stb.ubr11.brad.blueyonder.co.uk) |
| 19:10.06 | *** join/#htc-linux rob_w (n=bob@p85.212.131.207.tisdip.tiscali.de) |
| 19:11.17 | *** mode/#htc-linux [+o rob_w] by ChanServ |
| 19:11.24 | *** mode/#htc-linux [-v cr2] by rob_w |
| 19:11.31 | rob_w | hey room |
| 19:14.26 | pH5 | hey rob_w |
| 19:14.35 | BabelO | ola rob_w |
| 19:14.45 | rob_w | pH5, BabelO , sirs ! |
| 19:15.18 | lilliput | Hello all ;) |
| 19:17.41 | *** join/#htc-linux rob_w|umpc (n=bob@p85.212.131.207.tisdip.tiscali.de) |
| 19:19.02 | lilliput | I have seen that the GSM is partialy working |
| 19:19.12 | lilliput | that's reaally good |
| 19:21.18 | rob_w|umpc | lilliput, good mood is always welcome |
| 19:22.22 | lilliput | I'm following the devel from far I'll give a help when more available but this is really a good news |
| 19:22.57 | lilliput | I'm just waiting for phone / sms to work to totally switch to it. |
| 19:23.25 | pH5 | lilliput: don't we all :) |
| 19:23.44 | rob_w|umpc | yeah |
| 19:24.13 | rob_w|umpc | but its not just that |
| 19:24.43 | lilliput | battery is not much an issue for the moment |
| 19:24.47 | rob_w|umpc | u need to have other things also , suspend n |
| 19:25.00 | lilliput | I have usb every for the moment |
| 19:25.10 | rob_w|umpc | lilliput, why??, |
| 19:25.28 | rob_w|umpc | how much batterys do u own |
| 19:27.43 | lilliput | I mean that I mostly work in front of computers |
| 19:28.15 | lilliput | and even 100% on linux, I could even say that I'm working to produce GPL code |
| 19:29.02 | lilliput | so having the mda pro plug onto a computer is not a pb |
| 19:29.47 | *** join/#htc-linux rob_w|umpc (n=bob@p85.212.131.207.tisdip.tiscali.de) |
| 19:37.36 | pH5 | I wish I could figure out how to wake up the cpu from suspend when there is an incoming call.. |
| 19:40.32 | rob_w|umpc | pH5, i know in heory u pull certain gpios , then pxa wakes up on them |
| 19:41.31 | *** join/#htc-linux psokolovsky_ (n=psokolov@238.usernat.ip.net.ua) |
| 19:42.19 | rob_w|umpc | psoko dude |
| 19:42.37 | pH5 | rob_w: right. i know two gpios are configured as input (10 and 108) connected to the phone. only 10 can be used as a wake-up source on pxa27x, but it just doesn't work. |
| 19:42.39 | pH5 | hey psokolovsky |
| 19:45.36 | rob_w|umpc | pH5, maybe we miss ther general "use external wake ups " gpio |
| 19:49.01 | pH5 | rob_w|umpc: good idea. i'll double check this. |
| 19:52.19 | pH5 | wow. gomunicator works on the magician. but I need a way to customize the frame postfix. |
| 20:03.44 | goxboxlive | BabelO: Yesterday when i made a image i was using the release source and not the svn, today i tried with the svn source (on both using your htcphone). It seems like for me that the fisrt release is bether than the svn version. |
| 20:06.32 | BabelO | goxboxlive: why ? you see some bug ? |
| 20:08.34 | goxboxlive | well, for instance Apperance wouldnt start. And it stated with theme crisp, not the default one |
| 20:09.14 | *** join/#htc-linux rmoravcik (n=rmoravci@icm8-orange.orange.sk) |
| 20:09.38 | goxboxlive | and it seems very slow |
| 20:09.54 | goxboxlive | and the screen flashes alot |
| 20:10.00 | BabelO | goxboxlive: yes i see this error , appearence fail .. |
| 20:10.23 | goxboxlive | yes, that didnt happend with the tar.gz source |
| 20:10.50 | BabelO | yesturday i remove some line from task.cfg, and he don't flash then but we can t start app by click |
| 20:11.17 | goxboxlive | ok |
| 20:12.33 | goxboxlive | Did not receive a connection event from the qws server |
| 20:12.34 | goxboxlive | apm: Device or resource busy |
| 20:14.08 | goxboxlive | This is also happening in the release source: http://pastebin.ca/306984 |
| 20:17.20 | cr2 | goxboxlive: what are this keycodes ? |
| 20:17.47 | cr2 | fcking wince on hermes drives me crazy. it does not want to connect to the wifi ap. |
| 20:18.10 | cr2 | ba/universal/sable all work as expected. |
| 20:18.52 | goxboxlive | The keycodes are some bugs, I am not using any keydriver a.t.m. |
| 20:27.13 | BabelO | goxboxlive: ok i m starting dev qtopia application.... |
| 20:27.45 | *** join/#htc-linux TripleDES (n=sergio@173.red-62-57-1.user.auna.net) |
| 20:28.33 | goxboxlive | ok |
| 20:50.15 | *** join/#htc-linux cr2 (n=konversa@crpl22.physik.uni-wuppertal.de) |
| 20:55.12 | goxboxlive | What is this: /dev/.udev/failed/devices@platform@htcuniversal_button |
| 21:17.51 | *** join/#htc-linux rejon (n=rejon@adsl-75-5-124-98.dsl.pltn13.sbcglobal.net) |
| 21:18.24 | *** part/#htc-linux rejon (n=rejon@adsl-75-5-124-98.dsl.pltn13.sbcglobal.net) |
| 21:25.50 | kimuSan^ | hola ppl |
| 21:26.04 | kimuSan^ | cr2: which registers should I dump for you? |
| 21:27.30 | cr2 | pd 0x59000000 0x34 |
| 21:27.33 | cr2 | and |
| 21:27.46 | cr2 | pd 0x50000028 0x4 |
| 21:27.50 | cr2 | pd 0x50004028 0x4 |
| 21:27.52 | cr2 | pd 0x50008028 0x4 |
| 21:28.11 | cr2 | i can't connect to hermes over wifi, and over usb anyway. |
| 21:28.49 | kimuSan^ | others? |
| 21:29.03 | cr2 | no yet. |
| 21:29.30 | cr2 | but we need to peek at the usb host registers. |
| 21:29.45 | cr2 | and gpio of course. |
| 21:31.53 | kimuSan^ | http://www.schulz.dk/trinity-linux/trindump.txt |
| 21:32.26 | cr2 | ok, thanks. |
| 21:32.30 | cr2 | static void putc(int ch) |
| 21:32.41 | cr2 | here |
| 21:32.43 | cr2 | ./include/asm-arm/arch-s3c2410/uncompress.h |
| 21:33.00 | cr2 | i think we can replace it with a dummy for now. |
| 21:34.06 | cr2 | hmm. 00 is ok, 0x17 is the same, 0x120 for the second port ? |
| 21:34.18 | cr2 | ah, you have trinity, not hermes. |
| 21:34.37 | cr2 | btw, are your IR and phone switched on ? |
| 21:35.51 | kimuSan^ | dont think so, but wifi is (I connect through it |
| 21:36.05 | kimuSan^ | yes trinity (hence the url) |
| 21:37.41 | cr2 | ok. then switch them on, and dump the 0x50000000, 0x50000004 and 0x50000028 (and +4000 and +8000) |
| 21:38.33 | kimuSan^ | what do you mean by switching phone on? it is always on as far as I know |
| 21:38.48 | kimuSan^ | unless I am in flight mode |
| 21:39.53 | *** join/#htc-linux maniacxs (n=maniacxs@pD95463C8.dip0.t-ipconnect.de) |
| 21:40.22 | kimuSan^ | actually IR is on. at least it is set to accept incomming connections |
| 21:41.05 | maniacxs | hi there, i wanted to give the universal one more try :) has the naming of the mmc card changed? |
| 21:41.11 | maniacxs | (the devicename) |
| 21:42.29 | cr2 | <PROTECTED> |
| 21:43.11 | maniacxs | in startup.txt is following: root=/dev/mmcblk0p2 |
| 21:43.40 | cr2 | yes. and rootdelay=5 |
| 21:43.48 | BabelO | cr2: :) |
| 21:44.08 | pH5 | is qomunicator using the same phoneComms codebase as gomunicator? |
| 21:44.25 | cr2 | it's some weird mess. |
| 21:45.25 | cr2 | i doubt it works at all. |
| 21:45.27 | maniacxs | cr2: do you know if the device has problems with the higher cpu freq? |
| 21:45.43 | pH5 | :( extrapolating from the mess that is gomunicator, I can imagine |
| 21:46.43 | *** join/#htc-linux g3gg0__ (n=g3gg0@ppp-82-135-3-33.dynamic.mnet-online.de) |
| 21:46.48 | kimuSan^ | here is with phone+ir turned off : http://www.schulz.dk/trinity-linux/trindump2.txt |
| 21:46.48 | pH5 | cr2: do you know the range of the "%HTCCSQ: %d" link quality messages? |
| 21:46.54 | maniacxs | with 5seconds delay it works :) |
| 21:47.18 | cr2 | pH5: no. |
| 21:48.59 | kimuSan^ | cr2: did not seem to change anything |
| 21:49.57 | cr2 | ok. |
| 21:51.16 | kimuSan^ | ohh wait I did not get the 0x500000000 |
| 21:54.13 | kimuSan^ | hmm nothing there either |
| 21:59.16 | *** join/#htc-linux renatostore (n=renato4@100-181-119-85.dyn4.digitaleitalia.it) |
| 21:59.31 | kimuSan^ | nothing is really changing anywhere. tried to turn it on/off without any changes |
| 22:00.46 | cr2 | ok. |
| 22:00.54 | cr2 | can you check |
| 22:01.24 | cr2 | 0x4900003c |
| 22:01.35 | cr2 | is it's a msec counter ? |
| 22:01.41 | cr2 | 16bit |
| 22:05.37 | kimuSan^ | 4900003c | 0000dfa8 00002a2f 00000628 02001202 | ..../*..(....... |
| 22:06.09 | kimuSan^ | I can see that it counts |
| 22:06.41 | cr2 | ok, so the OHCI is running. |
| 22:06.55 | cr2 | can you |
| 22:07.07 | cr2 | pd 0x49000000 0x100 |
| 22:07.09 | cr2 | ? |
| 22:07.31 | maniacxs | wow gpe does really take long time to boot the first time. |
| 22:07.40 | cr2 | yeah. |
| 22:07.53 | kimuSan^ | cr2: sure. sec. |
| 22:09.04 | renatostore | cr2: hi, can we talk about alpine? |
| 22:09.20 | kimuSan^ | http://www.schulz.dk/trinity-linux/dump3.txt |
| 22:10.27 | cr2 | kimuSan^: pd 0x4c00000c 4 |
| 22:10.34 | cr2 | and i'll be very happy :) |
| 22:11.19 | kimuSan^ | 4c00000c | 0007ff70 | p... |
| 22:11.28 | cr2 | ok. thanks. |
| 22:11.45 | cr2 | renatostore: alpine ? |
| 22:12.19 | kimuSan^ | cr2: so do you see anything from all this ? |
| 22:12.28 | renatostore | yes, 2 question: |
| 22:12.39 | cr2 | kimuSan^: yes. |
| 22:13.01 | renatostore | 1- the device screen after few minuts became white |
| 22:13.18 | renatostore | and i cant change it |
| 22:13.29 | cr2 | renatostore: it's non-working suspend. |
| 22:13.43 | cr2 | we need to find the power on/off gpios. |
| 22:13.50 | renatostore | how |
| 22:13.51 | renatostore | ? |
| 22:13.53 | cr2 | for the LCD. |
| 22:14.18 | cr2 | hmm. by tracing gpios. |
| 22:14.31 | cr2 | but, ok. what is the second problem ? |
| 22:16.26 | cr2 | kimuSan^: NAND, LCDC, USBH and so on are enabled. |
| 22:16.54 | kimuSan^ | ok |
| 22:16.57 | cr2 | only IDLE and POWER are off. |
| 22:17.16 | cr2 | hmm. need to decode them all. |
| 22:17.32 | cr2 | still don't understand this serial divisor stuff ;) |
| 22:17.41 | kimuSan^ | the 44? |
| 22:17.54 | renatostore | 2- i open a terminal on alpine and |
| 22:18.25 | renatostore | opie disapear and i see a lot of error on console |
| 22:18.52 | renatostore | 3- how can i use the phone? |
| 22:19.16 | kimuSan^ | have to go. the girlfriend needs some attention...I will be back tomorrow morning. |
| 22:20.59 | cr2 | ok. |
| 22:21.56 | maniacxs | cr2: do you know if there are now keymaps? it disapeared in the 'bug' list |
| 22:21.59 | cr2 | renatostore: 2. it's an opie image for the universal, sone things may be different (serial ports, etc) |
| 22:22.10 | cr2 | 3. it's too early to talk about. |
| 22:22.36 | cr2 | maniacxs: for what layout ? |
| 22:22.37 | maniacxs | de |
| 22:23.08 | cr2 | i have not done it. Fn is AltGr, so you need to write a table for 'loadkeys' |
| 22:23.36 | cr2 | the default font does not habe euro symbol. |
| 22:23.38 | maniacxs | i tried to create one some time ago, but not all keys i needed had a keycode |
| 22:24.02 | cr2 | probably another font should be loaded. |
| 22:24.04 | maniacxs | it was with the 2.6.16 linux |
| 22:24.20 | cr2 | afaik all 64keys (8x8) have a key now. |
| 22:24.39 | cr2 | .16 is obsolete and should be deleted :) |
| 22:25.08 | cr2 | check wth showkey |
| 22:25.32 | maniacxs | i give it one more try, when it finished booting ;) |
| 22:25.44 | *** join/#htc-linux drno (n=drno@eki.student.utwente.nl) |
| 22:26.01 | drno | meh, finaly found the channel again |
| 22:27.49 | renatostore | cr2: so what is the next item? |
| 22:28.28 | cr2 | gpio tracing, but only you can do it. |
| 22:28.42 | renatostore | how? |
| 22:30.04 | cr2 | not so easy to explain... |
| 22:30.08 | cr2 | http://wiki.xda-developers.com/index.php?pagename=AlpineGPIO |
| 22:30.20 | cr2 | 9 Backlight O 1 0 |
| 22:30.41 | cr2 | hmm. seems that we can control the backlight |
| 22:31.13 | cr2 | PWM_OUT0 |
| 22:32.21 | cr2 | it seems to me that wifi uses pcmcia interface. |
| 22:32.26 | cr2 | like on ba. |
| 22:34.10 | cr2 | the sound and cpld are like on magician. you should cooperate with pH5 on this. |
| 22:34.24 | cr2 | and i guess the phone too. |
| 22:34.32 | cr2 | battery - also. |
| 22:35.39 | renatostore | is there a magician opie image? maybe it is better than universal |
| 22:37.10 | cr2 | ask pH5 |
| 22:38.40 | cr2 | http://wiki.xda-developers.com/index.php?pagename=AlpineMemoryMap |
| 22:39.37 | pH5 | no, there is no magician opie image. is there an opie user with a magician out there? |
| 22:40.38 | cr2 | i guess there should not be a special magician image. we need a common setup. |
| 22:42.38 | maniacxs | has wifi to be enabled in windows before booting gpe with universal? |
| 22:43.15 | pH5 | cr2: agreed. just there is no magician opie user currently, so the opie images might or might not work at all. |
| 22:44.24 | pH5 | I'd be very interested in learning about the alpine's CPLD register layout |
| 22:44.34 | pH5 | http://wiki.xda-developers.com/index.php?pagename=AlpineCPLD is not very verbose |
| 22:48.00 | cr2 | maniacxs: does not matter. |
| 22:48.36 | cr2 | pH5: AlpineCPLD is a quick-look with IDA ;) |
| 22:48.49 | pH5 | cr2: ah, cool :) |
| 22:49.01 | cr2 | i don't have the device. |
| 22:49.13 | cr2 | but it's very similar to magician. |
| 22:49.25 | cr2 | the only PITA is the asic5. |
| 22:50.03 | pH5 | what is it used for? |
| 22:50.22 | cr2 | gsm_data ;) |
| 22:50.35 | cr2 | it has a serial port and 2 pcmcia slots afaik. |
| 22:50.48 | cr2 | the last are used for the backpack. |
| 22:50.51 | pH5 | oy. this looks like a time sink. |
| 22:51.02 | cr2 | serial port for the gsm_data |
| 22:51.30 | cr2 | i don't think it's very complex, but certainly not worth the time. |
| 22:51.50 | cr2 | at least not now. |
| 22:52.48 | pH5 | do you think there will be other devices with this asic? |
| 22:55.00 | cr2 | no. only himalaya. |
| 22:55.32 | cr2 | himalaya has BT on asic5 serial. |
| 22:56.35 | renatostore | there is anything I can do now? |
| 22:56.53 | renatostore | some tests? |
| 22:58.12 | maniacxs | hm what ist oom-killer? it seems to hang. |
| 22:58.23 | pH5 | renatostore: what are the next big tasks? gsm? battery? sound? |
| 22:59.47 | renatostore | i think gsm |
| 23:00.55 | renatostore | but maybe we can reach first the esasy things |
| 23:01.10 | renatostore | (battery ?) |
| 23:01.34 | pH5 | renatostore: you need to know which (e)gpios to switch to enable and disable the phone |
| 23:02.02 | renatostore | how? |
| 23:03.26 | pH5 | pxa gpios can be traced with wgpio |
| 23:04.00 | renatostore | the command pls |
| 23:04.37 | pH5 | start haret, connect via telnet and enter "wgpio 1" |
| 23:06.20 | renatostore | can i perform a non-interactive analisys? "wgpio 1 output.txt" |
| 23:06.44 | pH5 | you can enter "log output.txt" before wgpio 1 and "unlog" afterwards |
| 23:07.52 | pH5 | and you can enter "set igpio xx 1" for all known gpios from the AlpineGPIO page |
| 23:08.35 | renatostore | i can't connect linux-wince, this is the reason why I want to use haret without telnet |
| 23:09.38 | renatostore | i'm going to test |
| 23:10.08 | pH5 | ok. so you are writing scripts and executing them on the device? |
| 23:10.18 | renatostore | yes |
| 23:15.29 | pH5 | renatostore: and after you find gpios that change when you enable or disable flight mode, you can go hunting for the egpios on the CPLD |
| 23:15.57 | renatostore | i did wgpio 1 |
| 23:16.08 | *** join/#htc-linux tudenbart (n=willi@xdsl-213-196-246-66.netcologne.de) |
| 23:16.29 | renatostore | do i need to repeat with fligh mode on? |
| 23:18.08 | *** join/#htc-linux rob_w (n=bob@p85.212.131.207.tisdip.tiscali.de) |
| 23:19.46 | pH5 | you should run wgpio and then turn flight mode off or on. we want wgpio to capture the changing gpios during the process. for that it is probably good to watch gpios for a longer time (it is "wgpio <seconds>") and then turn on/off flight mode. |
| 23:21.05 | pH5 | renatostore: and you can try another trace "wi 1" to see which IRQs are triggering constantly so we can mute them for the EGPIO traces. |
| 23:21.39 | pH5 | to capture whatever is written to or read from the CPLD chip, you have to do |
| 23:21.44 | pH5 | set trace 0xa9500000 |
| 23:21.47 | pH5 | set tracemask 0xff |
| 23:21.55 | pH5 | wi 10 |
| 23:24.45 | renatostore | i think the best way is to connect by telnet. can you explain this process |
| 23:24.47 | renatostore | ? |
| 23:26.03 | pH5 | renatostore: the easiest way is to install synce |
| 23:28.10 | pH5 | I have synce's vdccm daemon running as user, and when the magician is plugged in via usb-serial, I run synce-serial-start as root (actually udev does). after this I can ping wince at 192.168.131.201 |
| 23:28.16 | renatostore | did and after? |
| 23:30.34 | pH5 | renatostore: at what step are you? usb driver loaded? dccm running? synce-serial-start called? |
| 23:32.35 | renatostore | i ran dccm and pluged device |
| 23:32.59 | pH5 | is the alpine a wm2005 device? |
| 23:33.10 | renatostore | 2003se |
| 23:34.26 | pH5 | then you should run synce-serial-start, if the device was detected as usb-serial. |
| 23:34.52 | pH5 | when I do this, I see the connection notification on the magician. |
| 23:37.40 | *** join/#htc-linux Ralith (n=ralith@soggy202.drizzle.com) |
| 23:38.47 | renatostore | i can ping |
| 23:41.44 | renatostore | i'm inharet |
| 23:45.26 | renatostore | pH5: if i run wgpio 10 and during the list i turn on flight mode I can't see the difference |
| 23:45.47 | renatostore | what do you exoect to see? |
| 23:46.58 | pH5 | renatostore: great. I'd expect some GPLR change messages. |
| 23:48.21 | renatostore | i see a list like this |
| 23:48.22 | pH5 | renatostore: can you do "wi 5" and then "set ii <num> 1" for num=all the irqs you see? then set trace and tracemask and do wi 10 before turning on flight mode |
| 23:48.23 | renatostore | GPLR[76] changed to 1 |
| 23:50.55 | renatostore | one step at once |
| 23:51.07 | renatostore | what about wgpio |
| 23:51.41 | pH5 | is 76 the only gpio that changed the level? |
| 23:52.01 | pH5 | I'd expect one of 10,108 to switch and also some in the 81-87 range |
| 23:52.01 | renatostore | i don't know |
| 23:52.40 | renatostore | can i do wgpio 1 with flight mode on |
| 23:52.55 | renatostore | and wgpio 1 with flight mode off |
| 23:52.58 | renatostore | ? |
| 23:55.06 | pH5 | renatostore: for that can use "dump gpio". |
| 23:55.46 | pH5 | but that way we will miss the interrupt and reset gpios that are only triggered for a short time |
| 23:57.22 | renatostore | it is difficult to find differences with wgpio |
| 23:58.39 | pH5 | renatostore: you don't need to find differences with wgpio |
| 23:59.02 | renatostore | i didn't understand |
| 23:59.13 | pH5 | renatostore: you just have to silence known gpios from the AlpineGPIO list with "set igpio <num> 1" |
| 23:59.31 | pH5 | and then the next time you run wgpio only the unknown gpios will be watched. |