| 00:00.01 | cr2 | 16bit |
| 00:00.21 | Kevin2 | There is just one 16 bit register for irc sources? |
| 00:00.27 | Kevin2 | s/irc/irq/ |
| 00:00.45 | cr2 | for the clear irq |
| 00:01.02 | cr2 | and the code says bits 1-5 are not for acks. |
| 00:01.11 | cr2 | so only 11 irqs |
| 00:01.16 | Kevin2 | There needs to be some register where the source can read what sub-line triggered the EINT1 signal. |
| 00:01.40 | cr2 | didn#t dig that deep yet :) |
| 00:01.58 | cr2 | they registers have shadow copies in RAM. |
| 00:02.02 | Kevin2 | Hrmm. Let's see if l1trace will find it. :-) |
| 00:02.05 | cr2 | i may even know the addresses. |
| 00:02.15 | cr2 | :) |
| 00:03.06 | Kevin2 | 000.000(0000000) 80053a8c: e1d320b4 ldrh r2, [r3, #4] # r2=00000002 r3=b4700004 |
| 00:03.55 | Kevin2 | 000.000(0000000) 094f5ea0: e1d330b8 ldrh r3, [r3, #8] # r3=00000500 |
| 00:04.31 | cr2 | loads ? |
| 00:04.58 | Kevin2 | Yeah, you need to ldrh the register to see what sub-line raised the irq. |
| 00:05.24 | cr2 | 8 is ok. |
| 00:05.39 | cr2 | hm. and 4 is 0x2, which is also allowed. |
| 00:06.17 | cr2 | compile the new hack-haret. with SD enabled. if that will work.... :D |
| 00:06.45 | cr2 | btw, the USB_PUEN pin is also known. no real need to pull in/out the cable. |
| 00:07.28 | Kevin2 | I need to "cvs up" on hh.org kernel26? |
| 00:08.13 | cr2 | yes. |
| 00:08.55 | cr2 | well, i've enabled SD, but not yet PUEN. |
| 00:09.58 | Kevin2 | Okay, but I wont be able to test that tonight. |
| 00:13.00 | cr2 | ok. |
| 00:18.10 | cr2 | if you'll upload it i can test later. |
| 00:18.34 | Kevin2 | cr2: Does normal haret boot not work for you? |
| 00:19.24 | cr2 | it works, but i'm lazy. |
| 00:21.52 | Kevin2 | I've got to run - I'll try to take a look at this stuff later. |
| 00:23.14 | cr2 | till later. |
| 01:05.57 | *** join/#htc-linux Ro__En_PC (n=roen@p54A66E25.dip.t-dialin.net) |
| 03:56.32 | *** join/#htc-linux psokolovsky_ (n=psokolov@82.193.98.4) |
| 05:15.16 | *** join/#htc-linux sadeness_ (n=LamersIn@nat1.rlan.ru) |
| 05:19.55 | *** join/#htc-linux _law_ (n=law@mail.stiftadmont.at) |
| 06:04.56 | *** join/#htc-linux pleemans (n=peter@d5152D19B.access.telenet.be) |
| 06:07.41 | *** join/#htc-linux RoEn_PC (n=roen@p54A66E25.dip.t-dialin.net) |
| 06:32.29 | *** part/#htc-linux rmoravci1 (n=rmoravci@pc-3s0zt5w2e4y0vzmhnrzq3a21zqajzfw.users.student.utc.sk) |
| 06:32.49 | *** join/#htc-linux rmoravci1 (n=rmoravci@pc-3s0zt5w2e4y0vzmhnrzq3a21zqajzfw.users.student.utc.sk) |
| 07:16.18 | *** join/#htc-linux Fossi (n=cmewes@195.177.48.115) |
| 07:40.25 | *** join/#htc-linux sadeness_ (n=LamersIn@nat2.rlan.ru) |
| 07:58.54 | *** join/#htc-linux tudenbart (n=willi@xdsl-81-173-174-78.netcologne.de) |
| 08:05.39 | *** join/#htc-linux kdag (n=aeroflot@84-74-29-80.dclient.hispeed.ch) |
| 09:32.47 | *** join/#htc-linux g3gg0_ (n=g3gg0@ppp-82-135-14-105.dynamic.mnet-online.de) |
| 09:35.30 | *** join/#htc-linux goxboxlive (n=goxboxli@195.159.97.196) |
| 10:00.23 | je | hmm. a bit off topic perhaps, but anyone know anything about the "persistent storage" feature introduced in windows mobile 5? before wm5 all user data, such as contacts, the calendar etc were stored in a dedicated area of the RAM, now it's stored in flash if i've understood it correctly. i'm interested in using htc-linux for forensic purposes if possible, e.g. for dumping the user data. |
| 10:47.20 | *** join/#htc-linux eremias (n=fdsfs@ACB2A1D5.ipt.aol.com) |
| 10:47.53 | *** join/#htc-linux goxboxlive (n=goxboxli@195.159.97.196) |
| 10:51.02 | *** join/#htc-linux rob_w (n=bob@p213.54.6.168.tisdip.tiscali.de) |
| 11:23.04 | *** join/#htc-linux TripleDES (n=sergio@89.129.180.111) |
| 11:56.44 | *** join/#htc-linux eremias (n=fdsfs@ACB2A1D5.ipt.aol.com) |
| 11:59.42 | goxboxlive | hello |
| 12:04.40 | RoEn_PC | moin goxboxlive |
| 12:26.08 | goxboxlive | hi there |
| 12:35.56 | *** join/#htc-linux root1 (n=root@lun34-2-82-238-28-28.fbx.proxad.net) |
| 13:21.15 | *** join/#htc-linux SmallR2002 (n=SmallR20@88-107-88-222.dynamic.dsl.as9105.com) |
| 14:22.14 | *** join/#htc-linux WizMaui (n=WizMaui@62.112.90.250) |
| 14:30.18 | *** join/#htc-linux g3gg0__ (n=g3gg0@ppp-82-135-14-105.dynamic.mnet-online.de) |
| 14:34.45 | *** join/#htc-linux scorpio16v (n=fdsfs@ACB2A1D5.ipt.aol.com) |
| 15:17.57 | *** join/#htc-linux goxboxlive (n=goxboxli@206.80-202-161.nextgentel.com) |
| 16:00.57 | *** join/#htc-linux BabelO (n=root@lun34-2-82-238-28-28.fbx.proxad.net) |
| 16:01.39 | goxboxlive | hi BabelO |
| 16:05.47 | BabelO | hi |
| 16:05.58 | BabelO | sound is working for you ? |
| 16:14.00 | goxboxlive | BabelO: no |
| 16:14.05 | goxboxlive | for you? |
| 16:14.30 | goxboxlive | cr2 took a look at it yesterday, but i dont know how it went. |
| 16:15.31 | BabelO | ok |
| 16:15.50 | BabelO | i have to ask to pH5 because i can't compile magician module too |
| 16:16.07 | goxboxlive | ok |
| 16:16.27 | BabelO | maybe cr2 go back this evening :) |
| 16:16.53 | goxboxlive | yes i hope so. Lets not hope he has went to soumi again :-) |
| 16:18.37 | *** join/#htc-linux rmoravcik (n=rmoravci@pc-nbhcnceqpo8wov6n0m468h4u6ax6am4.users.student.utc.sk) |
| 16:26.42 | BabelO | soumi ? what is this ? |
| 16:35.10 | goxboxlive | finland |
| 16:54.04 | *** join/#htc-linux pleemans (n=peter@d51A5E76A.access.telenet.be) |
| 17:06.08 | *** join/#htc-linux scorpio16v (n=ubuntu@ACB2A1D5.ipt.aol.com) |
| 17:07.05 | *** part/#htc-linux scorpio16v (n=ubuntu@ACB2A1D5.ipt.aol.com) |
| 17:08.16 | *** join/#htc-linux cr2 (n=konversa@crpl22.physik.uni-wuppertal.de) |
| 17:13.08 | BabelO | hi cr2 :) |
| 17:13.14 | BabelO | you come back |
| 17:13.26 | goxboxlive | We thought had moved to Finland again |
| 17:13.43 | goxboxlive | s/moved/traveled/ |
| 17:17.44 | cr2 | yeah, etelä-karjala is a nice place :) |
| 17:18.16 | goxboxlive | :-) how did it went with the sound driver yesterday, did you manage to have mic working? |
| 17:18.33 | cr2 | you mean the hack ? |
| 17:18.35 | goxboxlive | Or do you want to wait until we have it fully working? |
| 17:18.37 | goxboxlive | Yes |
| 17:19.15 | cr2 | but how are you going to use it ? |
| 17:20.30 | cr2 | without patching openmoko-dialer. |
| 17:20.48 | cr2 | is somebody working on the openmoko-dialer at all ? |
| 17:21.04 | cr2 | gsmd is another issue. |
| 17:23.07 | cr2 | food time. bbl. |
| 17:53.36 | *** join/#htc-linux g3gg0_ (n=g3gg0@ppp-82-135-75-7.dynamic.mnet-online.de) |
| 18:06.27 | *** join/#htc-linux eremias (n=fdsfs@ACB2A1D5.ipt.aol.com) |
| 18:13.40 | *** join/#htc-linux RoEn_PC (n=roen@p54A66E25.dip.t-dialin.net) |
| 18:34.46 | goxboxlive | cr2: The first time you tried out my cab installer you got a failure message when it tried to boot the rootfs. What was the reason, was it because you had the wrong root path in your startup.txt? |
| 19:04.05 | cr2 | goxboxlive: it was the kernel message that the card don't want to switch to 512byte block size. |
| 19:04.20 | cr2 | never seen that before. |
| 19:04.29 | cr2 | it works on bluenagel. |
| 19:04.35 | cr2 | and on hima. |
| 19:15.08 | goxboxlive | ok |
| 19:20.05 | *** join/#htc-linux Foxdie (i=Foxdie@77-98-48-193.cable.ubr05.harb.blueyonder.co.uk) |
| 19:38.18 | *** join/#htc-linux J-Man5 (i=J-Man5@cpe-72-183-241-242.satx.res.rr.com) |
| 19:42.51 | *** join/#htc-linux BabelO (n=kvirc@lun34-2-82-238-28-28.fbx.proxad.net) |
| 19:46.49 | cr2 | BabelO: do you have the asic3 leds driver ? |
| 19:48.18 | BabelO | oh yes ;) |
| 19:48.24 | BabelO | in two part |
| 19:49.19 | BabelO | what is prefered parameters for cvs diff ? |
| 19:49.37 | cr2 | does not matter. |
| 19:49.40 | cr2 | -u |
| 19:50.19 | BabelO | it is to have a nice diff format not the one with < characters |
| 19:52.13 | cr2 | yes. |
| 19:52.31 | BabelO | ok good |
| 20:00.43 | *** join/#htc-linux sanmiauz (n=sdsds@61.6.204.172) |
| 20:04.09 | *** join/#htc-linux tudenbart (n=willi@xdsl-81-173-227-222.netcologne.de) |
| 20:04.13 | BabelO | cr2: http://pastebin.ca/435143 sorry for the delay |
| 20:07.32 | BabelO | the second file http://pastebin.ca/435148 |
| 20:08.34 | cr2 | ok. i'll look at it. |
| 20:09.43 | BabelO | have another question for you |
| 20:10.10 | BabelO | is magician driver compiling with your source tree ? |
| 20:17.28 | cr2 | did not try. i'm editing wiki now. |
| 20:29.27 | *** part/#htc-linux sanmiauz (n=sdsds@61.6.204.172) |
| 20:36.56 | cr2 | (Stripping trailing CRs from patch.) |
| 20:38.54 | BabelO | outch ... sorry |
| 20:39.18 | BabelO | this version works, need to clean it after |
| 20:41.01 | cr2 | btw, why do you have the leds twice ? |
| 20:41.08 | cr2 | the asic3 leds in leds file |
| 20:42.16 | cr2 | i'll remove it. |
| 20:42.48 | BabelO | ok maybe, i do this work late in evening... only Copy /Paste with two finger no more :) |
| 20:43.45 | cr2 | :) |
| 20:43.47 | cr2 | <PROTECTED> |
| 20:43.59 | cr2 | the ds1wm will do the same. |
| 20:44.10 | BabelO | yes ;) easy way |
| 20:44.32 | cr2 | ok, we will think about it later. |
| 20:44.50 | BabelO | pH5 want to like asi3 soc driver for AIC2 |
| 20:44.53 | cr2 | it's actually the same chip all over again. |
| 20:44.56 | cr2 | http://wiki.xda-developers.com/index.php?pagename=MagicianAIC3 |
| 20:45.02 | BabelO | usefull only for magician and BA |
| 20:45.12 | cr2 | not only |
| 20:45.19 | BabelO | ok not :) |
| 20:45.25 | cr2 | himalaya and alpine. |
| 20:46.12 | cr2 | "GPIO" comes from pH5, but these are some PWM control registers. |
| 20:46.53 | BabelO | i nerver look here when WIFI comes up :) |
| 20:47.42 | cr2 | :) |
| 20:48.02 | cr2 | btw, there is no "extra power" |
| 20:51.29 | BabelO | :( |
| 20:52.22 | BabelO | it is really strange that on ba it is so different from hx4700 |
| 20:52.40 | cr2 | it seems to be the same on alpine. |
| 20:53.00 | cr2 | gpio75 on ba is just some notification gpio. |
| 20:53.10 | cr2 | it is switched to I on power up. |
| 20:53.18 | BabelO | yes |
| 20:53.21 | cr2 | seen in pcmcia.dll |
| 20:54.07 | cr2 | there is also a PASIC2 irq. |
| 20:54.22 | cr2 | don't know it's purpose. |
| 20:54.22 | BabelO | you think about something un pcmcia.dll like settings times |
| 20:55.14 | cr2 | there are some ASIC3 PCMCIA manipulations there. clocks and so on. |
| 20:55.19 | cr2 | like on hx4700. |
| 20:55.35 | cr2 | but the hx4700 code is actualy buggy. |
| 20:55.51 | cr2 | i've compared it to the pcmcia.dll on hx4700 some time ago. |
| 20:56.16 | cr2 | ok, i've applied your patches :) |
| 20:56.22 | cr2 | will try to compile. |
| 20:56.33 | BabelO | ok, now sound :) |
| 20:56.41 | BabelO | musika :) |
| 20:57.04 | cr2 | i'll try to compile the blueangel too. |
| 20:57.14 | cr2 | did you repair the ds1wm ? |
| 20:57.57 | *** join/#htc-linux rmoravcik (n=rmoravci@pc-3s0zt5w2e4y0vzmhnrzq3a21zqajzfw.users.student.utc.sk) |
| 20:58.03 | BabelO | hum no only file i sent to you |
| 20:58.21 | BabelO | got some strange asic3 irq demux message |
| 20:58.27 | BabelO | when ds1wm modprobed |
| 20:59.43 | cr2 | did i apply your ds1wm patch ? |
| 20:59.58 | cr2 | error: ‘HTC_WIFI_LED’ undeclared here |
| 21:00.20 | BabelO | oups |
| 21:00.26 | BabelO | blueangel_leds.h missing |
| 21:00.50 | BabelO | #define HTC_WIFI_LED 6 |
| 21:00.50 | cr2 | yes. |
| 21:00.50 | BabelO | #define HTC_BT_LED 7 |
| 21:00.50 | BabelO | void blueangel_led_brightness_set(struct led_classdev *led_cdev, enum led_brightness value); |
| 21:00.55 | *** part/#htc-linux J-Man5 (i=J-Man5@cpe-72-183-241-242.satx.res.rr.com) |
| 21:01.10 | BabelO | only three lines |
| 21:01.14 | cr2 | ok. |
| 21:02.02 | cr2 | blueangel_battery is unhappy. |
| 21:02.41 | cr2 | found your patch. |
| 21:03.28 | cr2 | (Stripping trailing CRs from patch.) |
| 21:03.39 | BabelO | again ? |
| 21:04.00 | BabelO | is it the complete file ? |
| 21:04.13 | cr2 | rejects to apply. |
| 21:04.35 | BabelO | i think i post the whole file not a patch |
| 21:05.01 | cr2 | blueangel_battery.c ? |
| 21:05.08 | BabelO | yes |
| 21:05.09 | cr2 | pastebin it again. |
| 21:06.34 | BabelO | here http://pastebin.ca/435244 |
| 21:06.42 | cr2 | error: invalid use of undefined type ‘struct ds2760_status’ |
| 21:06.44 | BabelO | there is no supplychanged detetc |
| 21:07.03 | cr2 | ok. |
| 21:08.04 | cr2 | does it replace the blueangel_battery.c file ? |
| 21:08.25 | BabelO | yes |
| 21:08.36 | BabelO | i take it from h4000 i think |
| 21:08.40 | cr2 | ok. |
| 21:09.26 | cr2 | compiles :) |
| 21:09.37 | BabelO | good |
| 21:10.06 | BabelO | is it same battery driver on himalaya ? |
| 21:12.50 | cr2 | it should be. |
| 21:12.59 | cr2 | but it's not implemented in wince :) |
| 21:14.17 | BabelO | i see you remove lot of thing from blueangel.c |
| 21:14.22 | BabelO | like default value port |
| 21:16.28 | cr2 | i'll remove even more. |
| 21:17.07 | cr2 | undefined reference to `led_classdev_resume' |
| 21:17.21 | cr2 | hm. it shoould select it in Kconfig |
| 21:17.47 | BabelO | and there is a old trace from lkcl maybe to debug with vibra ;) |
| 21:19.33 | cr2 | drivers/leds/ledtrig-shared.c: In function ‘shared_trig_activate’: |
| 21:19.33 | cr2 | drivers/leds/ledtrig-shared.c:23: error: dereferencing pointer to incomplete type |
| 21:19.37 | cr2 | uff. |
| 21:20.58 | cr2 | BabelO: leds-magician.c |
| 21:21.19 | cr2 | this is more or less good wifi/bt driver for blueangel. |
| 21:21.38 | BabelO | i did'nt actiavte leds sharing in config |
| 21:23.19 | cr2 | ok. |
| 21:24.35 | cr2 | compiled. don't know if it works. |
| 21:25.07 | BabelO | leds works |
| 21:25.16 | BabelO | and ds1wm show values :) |
| 21:26.56 | cr2 | btw, how does opie/whatever deal with 2 batteries ? |
| 21:28.08 | cr2 | ok, compiling magician now. |
| 21:29.09 | BabelO | ok ;) let me know if sound comile |
| 21:29.22 | BabelO | s/comile/compile/ |
| 21:31.04 | cr2 | yes. |
| 21:32.48 | cr2 | complies. |
| 21:32.51 | cr2 | <PROTECTED> |
| 21:32.55 | cr2 | sound/soc/pxa/magician.c:59:1: warning: "GPIO53_SSP1SYSCLK_MD" redefined |
| 21:32.59 | cr2 | In file included from sound/soc/pxa/magician.c:31: |
| 21:33.03 | cr2 | include/asm/arch/magician.h:173:1: warning: this is the location of the previous definition |
| 21:33.07 | cr2 | sound/soc/pxa/magician.c: In function ‘magician_set_input’: |
| 21:33.07 | cr2 | sound/soc/pxa/magician.c:335: warning: unused variable ‘codec’ |
| 21:33.07 | cr2 | sound/soc/pxa/magician.c: In function ‘magician_playback_hw_params’: |
| 21:33.08 | cr2 | sound/soc/pxa/magician.c:129: warning: ‘acds’ may be used uninitialized in this function |
| 21:33.08 | cr2 | sound/soc/pxa/magician.c:129: warning: ‘acps’ may be used uninitialized in this function |
| 21:34.30 | BabelO | got a problem on my config then |
| 21:34.42 | BabelO | or a missing module |
| 21:36.11 | cr2 | warning: "GPIO53_SSP1SYSCLK_MD" redefined |
| 21:36.18 | cr2 | we have an external clock here. |
| 21:42.22 | BabelO | where is magician default value config? |
| 21:43.01 | cr2 | which default ? |
| 21:43.15 | BabelO | like htcblueangel_defconfig file |
| 21:44.16 | BabelO | arch/arm/configs :) |
| 21:45.39 | cr2 | magician_defconfig |
| 21:53.12 | BabelO | CC [M] sound/soc/pxa/pxa2xx-ssp.o |
| 21:53.13 | BabelO | sound/soc/pxa/pxa2xx-ssp.c: In function 'pxa2xx_ssp_set_dai_sysclk': |
| 21:53.13 | BabelO | sound/soc/pxa/pxa2xx-ssp.c:238: error: 'SSCR0_MOD' undeclared (first use in this function) |
| 21:54.25 | cr2 | ok. |
| 21:54.32 | cr2 | you have pxa263 cpu |
| 21:54.52 | cr2 | it may make a difference. he has pxa272 |
| 21:55.05 | cr2 | pxa27x has different ssp setup. |
| 21:55.09 | cr2 | and bits. |
| 21:55.16 | BabelO | argh :( |
| 21:55.35 | BabelO | you right |
| 21:55.50 | BabelO | how can i solve this ? |
| 21:55.58 | BabelO | using pxa datasheet ? |
| 21:57.07 | cr2 | yes. and pxa-regs.h |
| 22:00.04 | psokolovsky_ | Hi! |
| 22:00.31 | BabelO | ok i m looking for my pxa datasheet n my hard drive |
| 22:00.34 | BabelO | hi psokolovsky_ |
| 22:00.53 | psokolovsky_ | BabelO: thanks for your patches for BA. it's just you happen to run into another refactor of battery/power stuff. bd2 works on fixing magician, etc issues |
| 22:02.20 | *** part/#htc-linux rmoravcik (n=rmoravci@pc-3s0zt5w2e4y0vzmhnrzq3a21zqajzfw.users.student.utc.sk) |
| 22:02.45 | BabelO | ok where can i have some sample, maybe i receive mail at kernel discuss |
| 22:03.59 | psokolovsky_ | BabelO: any changes are posted and discussed on kernel-discuss before committing |
| 22:05.17 | BabelO | ok i take a look into my mailbox |
| 22:06.14 | BabelO | i use same code as for hx4700 |
| 22:07.49 | psokolovsky_ | BabelO: yes, using *new* hx4700 code is just right. you can just follow its changes. |
| 22:10.22 | cr2 | psokolovsky_: what do you think about a PWM API ? |
| 22:11.16 | psokolovsky_ | cr2: if that's about (pseudo)patch you posted, sorry, didn't yet have chance to look at |
| 22:11.47 | cr2 | BabelO: keep in mind that the ba wifi/bt leds driver needs to be rewriteen once pH5 appears :) based on the magician-led.c |
| 22:12.32 | cr2 | psokolovsky_: yes. it is some kind of a patch, but the API needs some refinement. |
| 22:13.20 | psokolovsky_ | cr2: will have a look tomorrow. just clearing the queue of stuff people submitted over holidays ;-) |
| 22:18.40 | cr2 | ok. |
| 22:19.27 | BabelO | cr2: why all this register are not declared ? |
| 22:19.37 | cr2 | which ? |
| 22:20.00 | cr2 | you mean the bit names ? |
| 22:20.00 | BabelO | SSCR0_MOD and other for my pxa263 cpu |
| 22:20.08 | BabelO | yes |
| 22:20.12 | cr2 | just missing. |
| 22:20.23 | cr2 | i've added many of them to pxa-regs.h |
| 22:20.28 | BabelO | because this kernel is used by some platform developpement no ? |
| 22:20.49 | cr2 | nobody just needed these bits :) |
| 22:20.52 | cr2 | before. |
| 22:21.27 | cr2 | write a patch for pxa-regs.h |
| 22:30.17 | cr2 | BabelO: are you sure you need SSCR0_MOD ? |
| 22:31.49 | BabelO | not sure, i take magician structure code into sound/soc/pxa |
| 22:32.24 | cr2 | don't see this bit |
| 22:32.27 | BabelO | but there is nothing to do with pxa2xx-ssp file , so i think al lregister i needed if they exists in pxa263 arch |
| 22:33.15 | cr2 | i think pH5 needed it to enable SSP clock on pxa272 |
| 22:33.29 | cr2 | we don't need it, just setup the external clock. |
| 22:33.42 | cr2 | look how it's done in blueangel_audio.c |
| 22:33.46 | cr2 | ssp_init() |
| 22:34.03 | BabelO | ok |
| 22:36.02 | BabelO | so maybe i never need pxa2xx-ssp.c ? |
| 22:37.30 | cr2 | either/or. |
| 22:37.44 | cr2 | where is pxa2xx-ssp.c ? |
| 22:37.49 | cr2 | i'll look at it. |
| 22:38.19 | cr2 | found. |
| 22:38.24 | BabelO | ok |
| 22:38.58 | cr2 | this code is pxa27x specific. |
| 22:39.11 | cr2 | it probably needs an #ifdef PXA27x |
| 22:39.22 | BabelO | ok i look in my code |
| 22:39.53 | cr2 | #if defined (CONFIG_PXA27x) |
| 22:39.53 | cr2 | static int cken[3] = {CKEN23_SSP1, CKEN3_SSP2, CKEN4_SSP3}; |
| 22:39.53 | cr2 | #else |
| 22:39.53 | cr2 | static int cken[3] = {CKEN3_SSP, CKEN9_NSSP, CKEN10_ASSP}; |
| 22:39.53 | cr2 | #endif |
| 22:40.02 | cr2 | so be careful. |
| 22:40.32 | cr2 | <PROTECTED> |
| 22:40.37 | cr2 | this is your case. |
| 22:45.21 | cr2 | #elif defined(CONFIG_PXA27x) || defined(CONFIG_PXA26x) |
| 22:45.30 | cr2 | for SSCR0_MOD |
| 22:45.52 | BabelO | yes :) |
| 22:46.15 | BabelO | i look into lkcl blueangel.c file which compile and activate correctly uda1380 |
| 22:46.58 | cr2 | probably only because wince did it. |
| 22:48.28 | cr2 | CONFIG_PXA26x |
| 22:48.42 | cr2 | is used only in ./drivers/misc/adc/ads7846_adc_ssp.c |
| 22:48.58 | cr2 | and never defined. |
| 22:49.14 | cr2 | it seems we should set it. |
| 22:49.16 | BabelO | ok so |
| 22:51.34 | cr2 | hm. |
| 22:51.47 | cr2 | config PXA25x |
| 22:51.48 | cr2 | <PROTECTED> |
| 22:51.48 | cr2 | <PROTECTED> |
| 22:51.48 | cr2 | <PROTECTED> |
| 22:52.04 | cr2 | does not look quite right. |
| 22:52.24 | cr2 | because of SSP. |
| 22:54.04 | cr2 | config PXA26x |
| 22:54.04 | cr2 | <PROTECTED> |
| 22:54.04 | cr2 | <PROTECTED> |
| 22:54.04 | cr2 | <PROTECTED> |
| 22:54.08 | cr2 | let's try. |
| 22:54.44 | BabelO | ok where did you find this ? |
| 22:56.31 | cr2 | i've added it myself. |
| 22:56.34 | cr2 | ./arch/arm/mach-pxa/htcblueangel/Kconfig: select PXA_SSP |
| 22:56.49 | cr2 | this should probably go away eventually. |
| 22:57.46 | cr2 | ok, himalaya is retarded ;) |
| 22:57.49 | cr2 | ./arch/arm/mach-pxa/h4000/Kconfig: select PXA_SSP |
| 22:58.01 | cr2 | but this one we should discuss with psokolovsky. |
| 22:59.11 | BabelO | i see ssp in arch/arm/mach-pxa/Makefile |
| 22:59.47 | cr2 | do we need select PXA_SSP ? |
| 23:00.05 | cr2 | there is a lot of obsolete code :) |
| 23:03.48 | cr2 | added. |
| 23:03.54 | cr2 | update the CVS. |
| 23:03.59 | BabelO | ok |
| 23:06.17 | BabelO | ok i see why pslov say use new code of hx4700 :) |
| 23:06.46 | BabelO | now it is hx4700_power2.c :( |
| 23:06.59 | BabelO | hard job to do all changes |
| 23:12.31 | BabelO | ok battery didn't compile now :( |
| 23:13.47 | cr2 | hehe :) |
| 23:14.16 | cr2 | i'll wait with the himalaya code ;) |
| 23:15.16 | BabelO | again i took code from hx4700 for battery, they are really close |
| 23:16.16 | cr2 | we may conside unifying the code later. |
| 23:16.44 | cr2 | can you compile asoc now with the PXA26x enabled ? |
| 23:16.58 | BabelO | oh oh new structure is really nice |
| 23:17.02 | BabelO | yees i try |
| 23:18.43 | BabelO | one more step :) |
| 23:19.45 | BabelO | http://pastebin.ca/435496 |
| 23:25.15 | cr2 | #if defined (CONFIG_PXA27x) |
| 23:25.32 | cr2 | need to look into the PXA26x manual. |
| 23:27.27 | cr2 | nothing |
| 23:28.00 | BabelO | i put these function into a big define :) |
| 23:28.26 | BabelO | if clock is external, do not need to adjust it here |
| 23:28.50 | cr2 | the sound/soc/pxa/pxa2xx-ssp.c and pxa-regs.h are not quite kosher. |
| 23:29.23 | BabelO | what is meaning of kosher.? |
| 23:29.46 | cr2 | yes, this is pxa27x -specific code. |
| 23:29.52 | cr2 | not clean. |
| 23:30.04 | BabelO | ok |
| 23:30.21 | cr2 | +0x3c reg |
| 23:30.47 | cr2 | it must be ifdef'd in both files. |
| 23:31.48 | cr2 | they do not exist on PXA25x and PXA26x |
| 23:32.15 | cr2 | <PROTECTED> |
| 23:32.15 | cr2 | <PROTECTED> |
| 23:32.15 | cr2 | <PROTECTED> |
| 23:32.19 | cr2 | this is ok. |
| 23:32.34 | cr2 | <PROTECTED> |
| 23:32.38 | cr2 | <PROTECTED> |
| 23:32.42 | cr2 | <PROTECTED> |
| 23:32.46 | cr2 | <PROTECTED> |
| 23:32.50 | cr2 | <PROTECTED> |
| 23:32.54 | cr2 | <PROTECTED> |
| 23:32.58 | cr2 | <PROTECTED> |
| 23:32.58 | cr2 | <PROTECTED> |
| 23:32.58 | cr2 | <PROTECTED> |
| 23:32.59 | cr2 | this should get an ifdef. |
| 23:33.14 | BabelO | ok |
| 23:35.01 | cr2 | try to ifdef it, and compile again |
| 23:35.26 | cr2 | #if defined (CONFIG_PXA27x) |
| 23:35.58 | BabelO | ok now line 317 and 354 i do same thing |
| 23:36.03 | cr2 | for SSACD and SSTSA related things. |
| 23:36.44 | cr2 | 317 - ifdef too. |
| 23:37.12 | BabelO | yes but the whole funciton |
| 23:37.15 | cr2 | 354 -too. |
| 23:37.16 | *** join/#htc-linux psokolovsky (n=psokolov@82.193.98.4) |
| 23:38.16 | cr2 | psokolovsky: we've hit some config misfeature here. |
| 23:38.23 | psokolovsky | ? |
| 23:38.40 | cr2 | CONFIG_PXA26x does not exist. |
| 23:38.54 | cr2 | but is needed by some SSP-related drivers. |
| 23:39.12 | cr2 | like ads7846* and asoc. |
| 23:39.19 | cr2 | i've enabled it now. |
| 23:40.01 | bd2 | guys, regarding battery/power, please bother me if something is unclear ;-) |
| 23:41.02 | bd2 | I can mach-* stuff I've missed, if you point me to |
| 23:41.02 | psokolovsky | cr2: ok, I'll have a look later |
| 23:41.06 | bd2 | I can convert ... |
| 23:41.07 | cr2 | bd2: will the tps65021 driver fit in your infrastructure ? |
| 23:41.19 | bd2 | cr2, is it in -hh tree? |
| 23:41.36 | psokolovsky | bd2: magacian and htcapache broke, see busyb |
| 23:41.47 | cr2 | bd2: tps65011 afaik |
| 23:41.51 | cr2 | wait. |
| 23:41.52 | bd2 | psokolovsky, yeah, I'll fix them |
| 23:42.07 | cr2 | ./drivers/i2c/chips/tps65010.c |
| 23:42.22 | psokolovsky | bd2: please post your patches soon, so others don't duplicate work ;-) |
| 23:42.33 | cr2 | but hermes has 65021 so i'll try to adapt it. |
| 23:42.34 | bd2 | psokolovsky, ok. |
| 23:42.53 | bd2 | psokolovsky, I was busy mailing LKML. it's big excuse ;-) |
| 23:43.51 | psokolovsky | bd2: sure, no big hurry at all ;-). and thanks for doing that! |
| 23:44.36 | psokolovsky | bd2: I hope you get my mail to Matt to regarding clk stuff. 2.6.22 window will be open soon, so we should think what core stuff we want to get into it. |
| 23:45.34 | bd2 | psokolovsky, I guess we still not solved SoC depenecy issues. nor anyone cleaned up any SoC chip/infrastructure |
| 23:46.49 | psokolovsky | bd2, cr2: see my reply to RMK's mail on how irq bases for SoC could/should be handled. that would be a good start for cleanup. |
| 23:47.03 | cr2 | i'd like to have 2 pwm and 1 ssp for asic3. i'm stopped only by the API issues. |
| 23:47.19 | psokolovsky | bd2: as for soc's, we're not yet ready, true, but we should think what' on critical path to it at least |
| 23:47.26 | cr2 | psokolovsky: how many such "soc" devices do we have ? |
| 23:47.45 | psokolovsky | cr2: see drivers/soc/ ~5 IIRC ;-) |
| 23:47.55 | cr2 | sa1111, sa1101, locomo, samcop, asic2, asic3, ... |
| 23:48.00 | bd2 | cr2, tps65010.c seems rather *huge*. I will read it later, but I'm not familiar with I2C interface, thus if I2C will permit to split code to battery/power then I don't see any problems |
| 23:48.34 | cr2 | bd2: ok, i've just wanted to attract your attention. |
| 23:48.55 | cr2 | htc switched to tps* from ds276x in new devices. |
| 23:49.04 | bd2 | oh.. it also contains LED stuff. tps65010 is some kind of ASIC on I2C bus? ;-) |
| 23:50.24 | BabelO | cr2: pxa2xx_ssp_set_clock(&pxa_ssp_dai[0], PXA2XX_SSP_CLK_AUDIO); is PXA27x specifics |
| 23:50.36 | cr2 | BabelO: yes. |
| 23:50.54 | cr2 | CLK_AUDIO is pxa27x feature. |
| 23:51.22 | bd2 | cr2, so.. you obviously need to split that big driver to smaller ones (like tps-base, tps-leds, tps-battery, tps-power etc) |
| 23:51.41 | cr2 | ok, sounds reasonable. |
| 23:53.31 | cr2 | BabelO: there is a reason they have used external clock ;) |
| 23:54.15 | BabelO | cr2: yes i understand, we have some funciton to set this clock rate ? |
| 23:54.23 | BabelO | it is from asic ? |
| 23:57.02 | cr2 | i'm not quite sure where does it come from. maybe from uda1380, but i didn't read its datasheet in such detail. |
| 23:57.45 | cr2 | asic3 clock is switched on too, but it may be for the BT PCM codec. |