| 00:00.13 | Kevin2 | handhelds.org/~koconnor/HTCHermes/ |
| 00:01.24 | cr2 | ok, thanks. |
| 00:01.50 | cr2 | let's solve the 12 vs. 16.3xx MHz question. |
| 00:02.44 | cr2 | you use 16, but i've seen in your IR log that then the clock is funny. how do we check that hermes runs at 400MHz in linux ? |
| 00:04.18 | Kevin2 | I'm not sure - the only way I can think of would be to dump the clock registers and verify what they are set to. |
| 00:04.38 | cr2 | bogomips is about 200 |
| 00:04.49 | Kevin2 | bogomips doesn't mean anything though. |
| 00:04.54 | cr2 | but i don't know how representative is this number. |
| 00:05.00 | cr2 | ok. |
| 00:05.21 | cr2 | can you change to 12 and try to boot ? |
| 00:05.54 | Kevin2 | I'm pretty sure it boots okay - I think I had it at that setting earlier. |
| 00:06.06 | cr2 | ok. |
| 00:06.19 | cr2 | i'm a bit confused about the NAND timing. |
| 00:06.42 | cr2 | the numbers in dmesg are not looking like what i've expected. |
| 00:06.59 | cr2 | from reading the manual. |
| 00:07.48 | cr2 | if you are sure about 16.3 MHz then we need to revert the CVS to this setting. |
| 00:07.56 | Kevin2 | Hrmm. The samsung clock stuff is pretty cryptic. I think wm5 tries to scale the clock too, which makes it difficult to see what wm5 is doing. |
| 00:08.12 | cr2 | the CPU manual also says about 16.3 MHz for 400MHz CPU hclk. |
| 00:08.23 | Kevin2 | cr2: Heh, I put in that number because you recommended it - I don't have a clue what it should be set to. |
| 00:08.54 | cr2 | i've set it to 16.3 first. after reading the manual. |
| 00:09.11 | cr2 | but then i've seen your bootlog with 288MHz clock. |
| 00:09.27 | cr2 | that confused me. |
| 00:10.13 | cr2 | and the manual does not give you any accurate formulas for the calculations. |
| 00:10.24 | cr2 | that's all only in the kernel source. |
| 00:18.19 | cr2 | it's really late now. good night. |
| 00:18.27 | Kevin2 | Good night. |
| 01:28.27 | *** join/#htc-linux cyrill62 (n=cyrill62@135.247.6.195.dynamic.adsl.abo.nordnet.fr) |
| 02:15.51 | *** join/#htc-linux cyrill62 (n=cyrill62@80.220.20.81.dynamic.adsl.abo.nordnet.fr) |
| 02:22.11 | BabelO | cr2: it works... long time but compiling finish, and i can start opie. Maybe time to go to bed |
| 02:22.57 | BabelO | another thing really strange is now suspend resume works well with LCD too, i ll look with you tomorrow |
| 02:56.08 | BabelO | good night |
| 05:02.32 | *** join/#htc-linux scorpio16v (n=scorpio1@ACB3468B.ipt.aol.com) |
| 05:20.58 | *** join/#htc-linux sadeness_ (n=LamersIn@nat2.rlan.ru) |
| 05:27.22 | *** join/#htc-linux hugo_nz (n=hugo@60-234-142-71.bitstream.orcon.net.nz) |
| 06:11.17 | *** join/#htc-linux i386 (n=james@ppp167-236-180.static.internode.on.net) |
| 06:21.53 | *** join/#htc-linux rmoravcik (n=rmoravci@adsl-dyn49.91-127-60.t-com.sk) |
| 06:27.55 | *** join/#htc-linux pwr (n=pwr@86.121.234.245) |
| 06:32.41 | *** join/#htc-linux RoEn_PC (n=roen@p54A64890.dip.t-dialin.net) |
| 06:51.38 | *** join/#htc-linux goxboxlive (n=goxboxli@176.84-48-210.nextgentel.com) |
| 07:24.33 | goxboxlive | someone around? I need some hlep |
| 07:29.51 | RoEn | hi goxboxlive |
| 07:29.59 | RoEn | good morning |
| 07:30.15 | RoEn | yyyou need same help ? ;) |
| 07:33.33 | goxboxlive | yes |
| 07:34.43 | goxboxlive | where can i locate the headers files wich are defined like this in a *.cpp file: #include <misc.h> |
| 07:34.54 | RoEn | oooooooooooooooooh ;) |
| 07:55.40 | *** join/#htc-linux psokolovsky (n=psokolov@82.193.98.1) |
| 07:57.01 | goxboxlive | cr2: Are you awake? |
| 07:58.03 | *** join/#htc-linux rob_w (n=bob@p85.212.38.2.tisdip.tiscali.de) |
| 07:59.39 | *** join/#htc-linux twostupiddogs (n=towstupi@84.18.144.39) |
| 08:00.00 | twostupiddogs | goxboxlive: I might answer to this. |
| 08:00.22 | twostupiddogs | Usually they are located in a /usr/include folder which is the default |
| 08:00.46 | twostupiddogs | Though you can configure the compiler to have a different default location |
| 08:00.54 | twostupiddogs | like in cross compiling |
| 08:01.25 | twostupiddogs | Then with the Makefile you specify where headers are located (other than the default) with the -I directive |
| 08:01.35 | goxboxlive | ok, the problem is that opie2 is looking for some gnokii files (3rdparty) but it cant fiond it |
| 08:02.13 | twostupiddogs | I think we have a broken opie2 tree |
| 08:02.30 | twostupiddogs | they missed or stopped migrating from 4.1.7 to 4.2.1 |
| 08:02.54 | twostupiddogs | though qtopia 4.2.2 looks more complete. Ans should be used as a base... |
| 08:02.56 | goxboxlive | Yes we have, but this has something to do with gnokii wich iosent a part of it. And it might be that i have placed gnokii in a wrng folder. Hold on i'll pastebin |
| 08:03.22 | twostupiddogs | ok which exactly is the source file |
| 08:03.59 | twostupiddogs | ? |
| 08:04.11 | goxboxlive | hold on |
| 08:04.46 | goxboxlive | pastebin.co.uk/13619 |
| 08:05.47 | goxboxlive | I have placed my gnokii directory in: ~/cvs/opie/trunk/src/3rdparty/gnokii |
| 08:06.00 | twostupiddogs | checking ... |
| 08:06.03 | goxboxlive | where all the includes are |
| 08:07.00 | goxboxlive | ingen slik fil eller filkatalog = Nosuch file or directory |
| 08:07.18 | twostupiddogs | htcphone is BabelO work I suppose... |
| 08:07.42 | goxboxlive | yes |
| 08:08.00 | goxboxlive | it's located at xanadux if you want to try to build too |
| 08:08.07 | twostupiddogs | is it the one in Xanadux CVS? |
| 08:08.26 | goxboxlive | yes |
| 08:08.30 | goxboxlive | as opie |
| 08:08.57 | twostupiddogs | Well ok. I think you should change the Makefile to include the gnokii path |
| 08:09.11 | twostupiddogs | I think cr2 did this too. |
| 08:09.20 | goxboxlive | ok |
| 08:09.29 | twostupiddogs | you know how? |
| 08:09.40 | goxboxlive | no |
| 08:09.42 | goxboxlive | :-) |
| 08:09.48 | goxboxlive | i dont know where it is |
| 08:09.55 | goxboxlive | is it the regular one? |
| 08:10.24 | twostupiddogs | Wait checking out the cvs. |
| 08:10.29 | goxboxlive | thx |
| 08:11.31 | *** join/#htc-linux pleemans (n=peter@d51A5E76A.access.telenet.be) |
| 08:12.15 | twostupiddogs | You sure you updated your CVS? the gnokii source is in the CVS... |
| 08:12.16 | goxboxlive | twostupiddog: Why dont you also try to build it. I have all the headers and stuff, i can mail it to you if you like. It would have been great if we could have opie2 running. I heard that BabelO had sms working allready |
| 08:12.45 | goxboxlive | yes, couple of days ago |
| 08:13.06 | twostupiddogs | I tryed building it outside OE, native building failes too |
| 08:13.18 | twostupiddogs | the original one without any device... |
| 08:13.43 | goxboxlive | ok |
| 08:14.28 | twostupiddogs | HMMM there is a /usr/local/arm/include which makes me think BabelO has put gnokii there |
| 08:15.26 | goxboxlive | No he hasent. He sent me the /usr/loca/arm directory yesterday wich i am using now. And i also tried to put the gnokii in the, but it failed also |
| 08:17.04 | twostupiddogs | well the misc.h file is right there in the directory. |
| 08:17.25 | twostupiddogs | The problem seems some types which sould be defined somewhere else |
| 08:17.30 | goxboxlive | <twostupiddogs> Yes i know in the gnokii/include |
| 08:17.54 | twostupiddogs | ok sorry. |
| 08:18.00 | goxboxlive | <twostupiddogs> You dont have to waste your time with this. I can ask cr2 or BabelO when they arrive |
| 08:18.09 | *** part/#htc-linux scorpio16v (n=scorpio1@ACB3468B.ipt.aol.com) |
| 08:22.33 | twostupiddogs | They are also placed in thhe trunk/devices/htcphone/src/phone ... |
| 08:23.27 | twostupiddogs | to make compilation go on you can take those and put them into one of the included directoris |
| 08:24.44 | twostupiddogs | by the way. I'd like to build opie2 myself, can you send me your confs and hacks? |
| 08:25.43 | goxboxlive | 01:07cr2how is gnokii binded into the opie2 build process ? |
| 08:25.44 | goxboxlive | 01:08BabelOwe put it in libraries |
| 08:25.44 | goxboxlive | 01:08BabelOand add it to pro files include line |
| 08:25.44 | goxboxlive | 01:08cr2so i need to link it to the 3rdparty ? |
| 08:25.56 | goxboxlive | <twostupiddogs> of course, but i need your mail adress |
| 08:26.13 | goxboxlive | do you know mine? If so, send me a mail and i reply |
| 08:26.19 | goxboxlive | it's my user name at gmail |
| 08:26.40 | twostupiddogs | ok sending it. |
| 08:27.24 | twostupiddogs | sent |
| 08:28.28 | twostupiddogs | you didn't do anything that BabelO said above? |
| 08:28.57 | goxboxlive | I have just copied the gnokii liberay to 3rdparty folder |
| 08:29.12 | goxboxlive | I havent got your mail yet |
| 08:29.39 | goxboxlive | goxboxlive _****at*****_ gmail ______*****dot******______ com |
| 08:30.04 | twostupiddogs | yep got it right. :) |
| 08:30.08 | goxboxlive | :-) |
| 08:30.50 | twostupiddogs | Mail server queue is empty...ù |
| 08:30.57 | twostupiddogs | s/ù// |
| 08:31.10 | twostupiddogs | Stupid italian keyboard. |
| 08:31.14 | twostupiddogs | :-/ |
| 08:31.16 | goxboxlive | :-) |
| 08:33.34 | twostupiddogs | by the way, the CVS reports gnokii to be in src/3rdparty/libraries/gnokii |
| 08:35.36 | goxboxlive | ok thx i'll try that , havent got your mail yet. |
| 08:35.44 | twostupiddogs | hm strange. |
| 08:35.51 | twostupiddogs | I'll try another one... |
| 08:37.25 | goxboxlive | Well i have crying child. I'll send you my stuff when i get your mail. Have to feed my child :-) bbl |
| 08:41.26 | twostupiddogs | ok now the question here is which of the .pro files we should edit? the one in 3rdparty libraries or the one |
| 08:41.36 | twostupiddogs | :) I know the situation |
| 08:44.36 | twostupiddogs | bbl |
| 08:45.59 | *** join/#htc-linux rmoravcik (n=rmoravci@adsl-dyn49.91-127-60.t-com.sk) |
| 08:46.16 | *** join/#htc-linux rob_w (n=bob@p85.212.38.2.tisdip.tiscali.de) |
| 08:54.27 | twostupiddogs | BabelO it is in src server directory |
| 09:12.08 | *** join/#htc-linux i386 (n=james@ppp167-236-180.static.internode.on.net) |
| 09:23.39 | goxboxlive | <twostupiddogs I still havent received your mail |
| 09:23.53 | twostupiddogs | hm strange, very strnge. |
| 09:24.08 | twostupiddogs | I'll try another account... |
| 09:24.24 | goxboxlive | yes |
| 09:27.01 | goxboxlive | got it |
| 09:27.05 | twostupiddogs | ok sent via gmail, but this is pretty strange though! My mailserver queue is empty, so the mail has been delivered to gmail... Well it's saturday, I'll check next week |
| 09:28.38 | twostupiddogs | I think is gmail SMTP queue... |
| 09:30.34 | goxboxlive | ok, sent it to the twostupiddogs... adress |
| 09:30.49 | twostupiddogs | ok will wait for that |
| 09:31.09 | twostupiddogs | Reading IRC logs turns out they Edited the Makefile to add the -I and -L |
| 09:32.13 | goxboxlive | The one in trunk? |
| 09:32.31 | twostupiddogs | actually Makefile.target in src/servers or devices/htcphone/servers didn't understand it (thiugh as the failing process is in devices/htcphone/servers) |
| 09:32.40 | twostupiddogs | Yes |
| 09:32.53 | twostupiddogs | ok got the mail |
| 09:32.59 | goxboxlive | good |
| 09:34.00 | twostupiddogs | is the gnokii the one babelo sent to you? |
| 09:34.47 | goxboxlive | yes |
| 09:35.32 | goxboxlive | There is no Makefile in htcphone/server |
| 09:35.40 | goxboxlive | So it has to be src/server |
| 09:35.45 | goxboxlive | But where |
| 09:35.49 | twostupiddogs | -dbus -dbuspath /tmp/console/usr ? |
| 09:36.20 | goxboxlive | Yes, it's where i have the dbus-1.so. It's working |
| 09:36.58 | goxboxlive | It is a console image i just have extracted. BabeO told me to do it that way |
| 09:37.02 | twostupiddogs | I think is the one in devices/htcphone/server/src |
| 09:37.05 | goxboxlive | If it failes configure will tell you that dbus failed and continuing without dbus |
| 09:37.09 | goxboxlive | ok |
| 09:38.15 | goxboxlive | There is no devices/htcphone/server/src |
| 09:38.29 | twostupiddogs | in the trunk? |
| 09:39.07 | goxboxlive | yes |
| 09:39.38 | goxboxlive | jrs@linuxserver:~/cvs/opie/trunk/devices/htcphone$ ls -la server/ |
| 09:39.38 | goxboxlive | totalt 32 |
| 09:39.38 | goxboxlive | drwxr-xr-x 3 jrs jrs 4096 2007-04-26 12:18 . |
| 09:39.38 | goxboxlive | drwxr-xr-x 8 jrs jrs 4096 2007-04-26 12:18 .. |
| 09:39.39 | goxboxlive | drwxr-xr-x 2 jrs jrs 4096 2007-04-26 12:18 CVS |
| 09:39.39 | goxboxlive | -rw-r--r-- 1 jrs jrs 9789 2007-04-26 12:18 htcphonehardware.cpp |
| 09:39.41 | goxboxlive | -rw-r--r-- 1 jrs jrs 1940 2007-04-26 12:18 htcphonehardware.h |
| 09:39.43 | goxboxlive | -rw-r--r-- 1 jrs jrs 1813 2007-04-26 12:18 htcphonesuspend.cpp |
| 09:39.45 | goxboxlive | jrs@linuxserver:~/cvs/opie/trunk/devices/htcphone$ |
| 09:40.36 | twostupiddogs | ok you are right. |
| 09:41.07 | *** join/#htc-linux rmoravcik (n=rmoravci@adsl-dyn49.91-127-60.t-com.sk) |
| 09:41.34 | twostupiddogs | I think it's in the build dir you should fine one |
| 09:42.00 | goxboxlive | ok |
| 09:42.16 | twostupiddogs | devices/htcphone/src/phone |
| 09:42.23 | goxboxlive | jrs@linuxserver:~/cvs/opie/trunk/devices/htcphone$ find -name Makefile |
| 09:42.23 | goxboxlive | ./src/phone/Makefile |
| 09:42.23 | goxboxlive | ./src/plugins/phonevendors/htcphone/Makefile |
| 09:42.24 | goxboxlive | ./src/plugins/qtopiacore/kbddrivers/htcbuttons/Makefile |
| 09:42.24 | goxboxlive | ./src/plugins/qtopiacore/kbddrivers/htckeyboard/Makefile |
| 09:42.24 | goxboxlive | ./src/plugins/qtopiacore/kbddrivers/kernelkeymap/Makefile |
| 09:42.26 | goxboxlive | ./src/plugins/qtopiacore/kbddrivers/Makefile |
| 09:42.28 | goxboxlive | ./src/plugins/qtopiacore/Makefile |
| 09:42.30 | goxboxlive | ./src/plugins/Makefile |
| 09:42.34 | goxboxlive | ./src/Makefile |
| 09:43.16 | twostupiddogs | wait reading the irc log again... |
| 09:43.44 | goxboxlive | ok |
| 09:46.22 | twostupiddogs | ok there should be a Makefile.target |
| 09:46.44 | twostupiddogs | as it fails to configure for me now, I'll try with native build |
| 09:47.11 | goxboxlive | ok |
| 09:47.33 | goxboxlive | bbi10min |
| 09:49.30 | twostupiddogs | ok there should be a Makefile.target in the main folder... |
| 09:51.48 | twostupiddogs | ok me too |
| 10:02.19 | goxboxlive | ok |
| 10:28.20 | *** join/#htc-linux BabelO (n=pocketir@lun34-2-82-238-28-28.fbx.proxad.net) |
| 10:28.36 | twostupiddogs | Hi BabelO. |
| 10:28.41 | goxboxlive | Hi BabelO you are so welcome |
| 10:28.45 | goxboxlive | :;-) |
| 10:28.45 | BabelO | hi |
| 10:29.08 | goxboxlive | now, twostupiddogs explain for BabelO our problme |
| 10:29.49 | twostupiddogs | well, goxboxlive is stuck at the gnokii -I -L |
| 10:29.56 | goxboxlive | first of all i can make a pastebin |
| 10:30.15 | twostupiddogs | which file does he have to put the include path? |
| 10:30.55 | BabelO | ok wait i connect to my computer first |
| 10:32.50 | goxboxlive | pastebin.co.uk/13622 |
| 10:33.32 | goxboxlive | This is wiothout gnokii.h and misc.h in /usr/local/arm/include. If i copy thoose two files twi it it also failes with another message. |
| 10:34.09 | twostupiddogs | Cause of the missing libraries... |
| 10:34.43 | goxboxlive | I have placed gnokii in src/3rdparty/libraries |
| 10:35.26 | goxboxlive | BabelO: I am using the gnokii you sent me for a while ago (jan/feb) |
| 10:36.30 | BabelO | yes it is this one |
| 10:38.36 | *** join/#htc-linux BabelOued (n=Fabrice@lun34-2-82-238-28-28.fbx.proxad.net) |
| 10:38.53 | BabelO | /quit |
| 10:38.56 | twostupiddogs | ok what Makefile.target did you add the include and libs of gnokii? |
| 10:39.39 | BabelO | ok so |
| 10:39.57 | BabelO | did you put gnokii.h and misc.h to your include path ? |
| 10:40.30 | goxboxlive | yes i have also tried that. Hold i will and then i pastebin again |
| 10:43.43 | goxboxlive | This is with misc.h and gnokii.h in /usr/local/arm/include: pastebin.co.uk/13623 |
| 10:44.20 | goxboxlive | Ingen slik fil eller filkatalog = No such file or directory |
| 10:44.39 | BabelO | goxboxlive: yes this error is normal |
| 10:44.45 | goxboxlive | :-) |
| 10:44.47 | BabelO | i dodn't setup gnokii to run in rdparty |
| 10:44.59 | goxboxlive | ok, where should it be added? |
| 10:45.08 | BabelO | so it is good to copy this two file to your /usr/include |
| 10:45.18 | BabelO | but need some additional include file |
| 10:45.31 | BabelO | in your usr/include/gnokii |
| 10:46.51 | goxboxlive | so you are saying that my whole gnokii folder should be copied to usr/include? |
| 10:47.05 | BabelO | twostupiddogs: the Makefile.target to midfy is the one in src/server directory |
| 10:47.32 | BabelO | goxboxlive: no, there is an include directory in gnokii subtree |
| 10:47.35 | twostupiddogs | ok, but I'm far from getting to there... |
| 10:48.12 | twostupiddogs | BabelO: The tslib functionality test failed! |
| 10:48.45 | BabelO | twostupiddogs: do you use same include files as goxboxlive? |
| 10:48.50 | goxboxlive | <twostupiddogs> it's because of the crosscompiler, you have to make symlinks in your crosscompiler |
| 10:49.07 | twostupiddogs | /usr/local/arm ? yes he sent them to me |
| 10:49.25 | goxboxlive | Wich crosscompiler are you using? |
| 10:49.30 | twostupiddogs | also the configure in htcphone (changing paths to dbus) |
| 10:49.31 | goxboxlive | I had the same problmem yesterday |
| 10:50.09 | twostupiddogs | it seems it is not using the configure from htcphone, though in config.status the -I and -L is there... :/ |
| 10:50.18 | goxboxlive | Yes, but it hasent anything to do with tslib, it is the crosscompiler wich needs symlinks: look here i'll pastebin |
| 10:50.56 | twostupiddogs | you mean that need to do g++ and not arm-linux-g++ |
| 10:52.49 | BabelO | goxboxlive: in my gnokii directory i have a include sub directory, copy it s content to your arm include path for the moment |
| 10:53.00 | goxboxlive | ok |
| 10:53.05 | BabelO | goxboxlive: directory i send you yesturday |
| 10:53.11 | goxboxlive | yes |
| 10:53.17 | twostupiddogs | but in the command line to test it i see no -I/usr/local/arm/include |
| 10:54.11 | goxboxlive | http://pastebin.co.uk/13624 |
| 10:55.43 | *** join/#htc-linux pleemans (n=peter@d51A5E76A.access.telenet.be) |
| 10:56.03 | BabelO | goxboxlive: i ve to test with my gnokii change today ;) |
| 10:56.21 | goxboxlive | :-) |
| 10:56.23 | goxboxlive | cool |
| 10:56.37 | BabelO | yesturday i test opie2 standard, with some custom + helix player |
| 10:57.14 | goxboxlive | did the helix player work? |
| 10:57.20 | BabelO | if you want, i can compress my qtopia folter if you want to try |
| 10:57.35 | BabelO | yes it is working, but didn't find how to play video :( |
| 10:57.56 | goxboxlive | of course i want to try, but wait until you have included the latest gnokii changes. |
| 10:58.09 | BabelO | goxboxlive: ok |
| 10:58.16 | goxboxlive | What about the LCD/TS does it still flash when you navigate? |
| 10:58.32 | BabelO | i ve to eat, because yesturday i forgot about that and sleep at 5:00am |
| 10:58.40 | goxboxlive | :-) |
| 10:58.50 | goxboxlive | it is compiling gnokii now |
| 10:59.17 | goxboxlive | ok, now another bug :-) |
| 10:59.53 | BabelO | ah :) there is some missing file in opie too i fix all with qtopia-4.2.2 sources |
| 11:00.18 | BabelO | what is the error ? |
| 11:00.33 | goxboxlive | could it be a idea to just unzip all the files from 4.2.2 to opie/trunk? |
| 11:00.35 | goxboxlive | hold on have to pastebin |
| 11:00.57 | BabelO | goxboxlive: no i don't think |
| 11:02.25 | goxboxlive | BabelO: You go and eat, i am building over VNC and it is so much delay now (buggy wifi on my laptop ) . I'll post the pastebin later. Bon apetit |
| 11:02.45 | BabelO | merci |
| 11:03.10 | BabelO | good french :) |
| 11:03.24 | goxboxlive | :-) |
| 11:07.06 | goxboxlive | BabelO : http://pastebin.co.uk/13625 |
| 11:08.30 | twostupiddogs | goxboxlive: how did you solve the configure problem with tslib test? |
| 11:08.45 | goxboxlive | twostupiddogs: |
| 11:08.47 | goxboxlive | linuxserver:/home/jrs/cvs/opie/trunk/src/3rdparty/libraries/gnokii/include# ls -la /home/jrs/cvs/opie/trunk/devices/htcphone/mkspecs/qws/ |
| 11:08.47 | goxboxlive | totalt 16 |
| 11:08.47 | goxboxlive | drwxr-xr-x 4 jrs jrs 4096 2007-04-28 01:15 . |
| 11:08.47 | goxboxlive | drwxr-xr-x 4 jrs jrs 4096 2007-04-26 12:18 .. |
| 11:08.47 | goxboxlive | drwxr-xr-x 2 jrs jrs 4096 2007-04-28 01:14 CVS |
| 11:08.49 | goxboxlive | lrwxrwxrwx 1 jrs jrs 19 2007-04-28 01:15 linux-arm-g++ -> linux-blueangel-g++ |
| 11:08.51 | goxboxlive | drwxr-xr-x 3 jrs jrs 4096 2007-04-28 01:14 linux-blueangel-g++ |
| 11:08.53 | goxboxlive | lrwxrwxrwx 1 jrs jrs 19 2007-04-28 01:15 linux-htcuniversal-g++ -> linux-blueangel-g++ |
| 11:09.25 | goxboxlive | And making the symlinks in the crosscompiler as i told you |
| 11:12.47 | BabelO | goxboxlive: it is really strange, i got same error yesturday, but not at same time :) |
| 11:12.59 | goxboxlive | hmm |
| 11:14.11 | goxboxlive | how did you override it? |
| 11:15.33 | BabelO | this one, i nerver got it |
| 11:15.35 | BabelO | undefined reference to `QValueSpaceObject::setAttribute(char const*, QVariant const&)' |
| 11:19.28 | goxboxlive | <twostupiddogs> is it working now? |
| 11:19.35 | twostupiddogs | nope. |
| 11:19.56 | goxboxlive | have you made the symlinks? |
| 11:20.15 | twostupiddogs | Do I need a host tslib too??? |
| 11:20.35 | twostupiddogs | ok changing compiler... |
| 11:21.43 | BabelO | goxboxlive: try replacing alarmcontrol.cpp with the one in qtopia 4.2.2 |
| 11:21.48 | goxboxlive | ok |
| 11:22.02 | BabelO | why do you use VNC ? |
| 11:22.17 | BabelO | freenx is better ;) |
| 11:22.25 | twostupiddogs | :) |
| 11:26.03 | goxboxlive | same |
| 11:26.09 | twostupiddogs | babelo: as I have a x86_64 I'm using the compiler from codesourcery.com whould thi be ok? |
| 11:27.53 | goxboxlive | <twostupiddogs> i used that myself, and tslib failed |
| 11:28.03 | twostupiddogs | ho! |
| 11:28.27 | goxboxlive | but i havent got a 64 machne though |
| 11:29.01 | twostupiddogs | so I need to build a 32bit toolchain with OE? how do I do that? cr2 has an x86_64 how did he solve this? |
| 11:29.02 | BabelO | twostupiddogs: cr2 say something about -m32 |
| 11:29.21 | BabelO | a compiler option |
| 11:29.35 | BabelO | compatibility mode |
| 11:29.50 | twostupiddogs | well -m32 is there but if I use the one in OE qtopia won't configure |
| 11:30.04 | twostupiddogs | should I put an -m 32 in the configure you mean? |
| 11:30.21 | twostupiddogs | and use the OE x86_64 compiler? |
| 11:30.45 | BabelO | i don't know |
| 11:31.04 | twostupiddogs | well trying is no harm :) |
| 11:33.11 | twostupiddogs | -m32 is not accepted by configure... |
| 11:34.09 | twostupiddogs | WARNING: Qtopia does not support x86_64. Using -platform linux-g++-32 |
| 11:34.23 | twostupiddogs | is this going to use my host g++ I suppose... |
| 11:35.48 | twostupiddogs | ok, probably I was missing the link of the blueangel, cause now it does not complain... |
| 11:36.05 | BabelO | twostupiddogs: look here around 22:32 http://irclog.iclem.net/?chan=htc-linux&day=26 |
| 11:38.30 | twostupiddogs | ok. though I was using the 32bit gnueabi version... Anyway now it configured correctly... |
| 11:38.43 | twostupiddogs | WARNING: Failure to find: qbootsourceaccessory.cpp |
| 11:38.46 | twostupiddogs | known issue |
| 11:38.53 | twostupiddogs | what where the missing files? |
| 11:39.37 | goxboxlive | <twostupiddogs> take it form the 4.2.2 source |
| 11:39.45 | twostupiddogs | Doing it. |
| 11:39.49 | goxboxlive | good |
| 11:40.23 | goxboxlive | And remember to copy content of gnokii/include to /usr/local/arm/include before you do make. |
| 11:40.39 | goxboxlive | also subfolders, i tried without :-) |
| 11:40.54 | twostupiddogs | ok |
| 11:44.16 | twostupiddogs | I copied also the itemcontrol.cpp |
| 11:44.23 | twostupiddogs | which was missing |
| 11:44.46 | BabelO | twostupiddogs: yes itemcomtrol.cpp and .h |
| 11:45.53 | twostupiddogs | gnokii includes goin in /usr/local/arm/include directly or in a gnokii subfolder? As I see a <gnokii.h> I suppose in the main on, he? |
| 11:46.05 | twostupiddogs | ok done |
| 11:46.20 | twostupiddogs | ok starting to make |
| 11:46.58 | twostupiddogs | babelO: to do -j 3 you use icecc or distcc? |
| 11:48.00 | BabelO | twostupiddogs: no standard make |
| 11:48.27 | twostupiddogs | So you have a big server only |
| 11:48.28 | goxboxlive | pastebin.no/1435 Seems like there is something with libdbus-1.so. Look at at the top of the pastebin |
| 11:48.29 | twostupiddogs | _ |
| 11:48.37 | twostupiddogs | s/_/?/ |
| 11:49.10 | *** join/#htc-linux asylumed (n=insanity@vc-196-207-41-251.3g.vodacom.co.za) |
| 11:49.16 | BabelO | twostupiddogs: no i set a vpn with other computer i have and use MOSIX :) |
| 11:49.17 | twostupiddogs | stupid italian keyboard again. On laptops not an opition here :( |
| 11:49.25 | twostupiddogs | ho. |
| 11:49.46 | twostupiddogs | does it work with OE too? |
| 11:50.02 | BabelO | i don't know, not enopught place for OE ;) |
| 11:50.18 | BabelO | maybe i buy a harddrive this afternoon :) |
| 11:51.27 | twostupiddogs | I have a lot of powerfull servers around (my customers) so was wandering if I could steal some power while they are not working :) |
| 11:51.54 | twostupiddogs | kidding, though using my own servers, and my two/three PC's would really be great |
| 11:52.36 | BabelO | twostupiddogs: sometimes i test yafray and blender with this :) |
| 11:52.51 | twostupiddogs | :) |
| 11:53.10 | BabelO | MOSIX is hard to setup but very usefull |
| 11:54.13 | goxboxlive | bbl |
| 11:54.15 | twostupiddogs | yep. OE works with icecc (which is easyer and less intrusive in the system), but I only did a small research, and still haven't tested it yet |
| 11:54.29 | twostupiddogs | bbiaf |
| 12:01.30 | twostupiddogs | BabelO: what is in the opie2 which isn't in qtopia? |
| 12:05.11 | BabelO | twostupiddogs: at the moment, nothing :) |
| 12:05.35 | twostupiddogs | I thought so. Why don't we try building qtopia-4.2.2 then? |
| 12:05.42 | twostupiddogs | it seems more complete. |
| 12:06.12 | twostupiddogs | is it simpy 'cause of the htcphone dir needs tobe migrated? |
| 12:06.33 | BabelO | yes, you can try |
| 12:06.51 | BabelO | htcphone dir can works on qtopia or opie |
| 12:06.56 | twostupiddogs | ok, I'll try it, next task |
| 12:07.25 | twostupiddogs | I only need to merge the xanadux cvs right? |
| 12:08.31 | twostupiddogs | by the way, how do I add the dbus, tslib , and the gnokii libs to 3rdparty ? |
| 12:08.50 | twostupiddogs | what should I add in the .pro? |
| 12:09.29 | BabelO | yes, it is from xanadux cvs, you can coment out all gnokii related function... dbus and tslib is same in qtopia |
| 12:09.52 | BabelO | i ve to look at helix.pro file to know how to add gnokii :) |
| 12:10.07 | twostupiddogs | ok :) |
| 12:20.21 | *** join/#htc-linux rob__w (n=bob@p85.212.65.110.tisdip.tiscali.de) |
| 12:31.31 | twostupiddogs | BabelO: htcphonehardware.cpp:(.text+0x384): undefined reference to `gn_lib_phone_close |
| 12:31.53 | twostupiddogs | it seemsit is not finding the gnokii lib |
| 12:32.28 | BabelO | twostupiddogs: yes ;) |
| 12:32.44 | BabelO | you need to add -lgnokii to your Makefile.target |
| 12:33.14 | twostupiddogs | oops forgot to copy the lib also :) |
| 12:33.25 | twostupiddogs | ho that too |
| 12:33.41 | twostupiddogs | the one in src/servers ? |
| 12:34.14 | BabelO | yes i think look after you error name or directory you aer leaving |
| 12:34.25 | BabelO | take care about -j3 option ;) |
| 12:35.33 | twostupiddogs | will :) |
| 12:41.20 | *** join/#htc-linux RoEn_PC (n=roen@p54A64890.dip.t-dialin.net) |
| 12:50.37 | *** join/#htc-linux asylumed (n=insanity@196.30.118.76) |
| 12:55.28 | twostupiddogs | BabelO: U there? |
| 12:55.29 | BabelO | yes |
| 12:55.29 | BabelO | another message |
| 12:55.38 | BabelO | bt_sco ? |
| 12:55.48 | twostupiddogs | why is libgnoii linking to my libX11 ??? |
| 12:55.54 | twostupiddogs | do I need this one too? |
| 12:56.00 | BabelO | no ? |
| 12:56.13 | twostupiddogs | bitbake gnokii built it |
| 12:56.20 | BabelO | it is because gnokii provide a gui |
| 12:56.26 | twostupiddogs | I mean not the host, but the target one |
| 12:56.44 | twostupiddogs | ho ok, so I need that one too and all dependencies |
| 12:57.06 | BabelO | no gnokii gui is not usefull |
| 12:57.11 | twostupiddogs | shouldn't it be easyer to build a rootfs with all the necessary libraries? |
| 12:57.17 | BabelO | can you diable it ? |
| 12:57.39 | twostupiddogs | no idea. I'll check. I saw a post about this by cr2 too |
| 12:57.48 | BabelO | s/diable/disable/ |
| 12:59.05 | twostupiddogs | you have also libusb, libbluetooth and all the others in /usr/local/arm/lib ? |
| 13:00.01 | BabelO | no, i point my lib folder directly to opie image, so i don t check :) |
| 13:01.04 | twostupiddogs | shouldn't I link the /usr/loca/arm/lib to the staging of OE? |
| 13:04.22 | *** join/#htc-linux RoEn_PC (n=roen@p54A64890.dip.t-dialin.net) |
| 13:22.04 | *** join/#htc-linux hugo_nz (n=hugo@60-234-142-71.bitstream.orcon.net.nz) |
| 13:24.02 | *** join/#htc-linux asylumed (n=insanity@196.30.118.76) |
| 13:28.07 | *** join/#htc-linux scorpio16v (n=scorpio1@ACB3468B.ipt.aol.com) |
| 13:33.35 | cr2 | hi |
| 13:33.46 | BabelO | hi |
| 13:33.50 | cr2 | BabelO: does the resume work for you now ? |
| 13:34.10 | BabelO | yes and i don't understand why |
| 13:34.28 | BabelO | maybe your new clk settings |
| 13:35.37 | cr2 | i have modified some gpio settings and the timing between them. |
| 13:36.07 | cr2 | the backlight pwm control is still incomplete. thinking about asic3_pwm driver now. |
| 13:36.37 | BabelO | ok :) first i do when i saw that is to check i m ok with cvs |
| 13:37.08 | BabelO | you change this in blueangel_lcd ? |
| 13:37.08 | cr2 | does opie2 work for you now ? |
| 13:37.21 | cr2 | what ? |
| 13:37.27 | BabelO | yes, i finish compile it at 4:45am an test it |
| 13:37.55 | cr2 | i'm surprised it works. |
| 13:38.09 | cr2 | would be more complicated on the universal. |
| 13:38.58 | BabelO | i can gzip my Qtopia folter, why more complicated on Universal ? |
| 13:40.18 | cr2 | sound control. |
| 13:41.05 | twostupiddogs | BabelO: l have a strange error here: libgnokii.so needs libusb libbluetooth, they are in /usr/local/arm/lib, but ld cannot find them??? |
| 13:41.06 | BabelO | ah yes ;) i compile my kenerl with snd-oss support |
| 13:41.06 | BabelO | but can't control sound, no mixer :( |
| 13:42.07 | cr2 | twostupiddogs: do you explicitely link to them ? |
| 13:42.11 | BabelO | twostupiddogs: i don't know :( |
| 13:42.29 | twostupiddogs | nope libgnokii from OE |
| 13:42.56 | twostupiddogs | I copied it over the rootfs where the /usr/local/arm/lib links |
| 13:43.08 | twostupiddogs | the libs are there though |
| 13:43.33 | twostupiddogs | if I try putting a -lusb or -lusb-0 it complains about not finding them :( |
| 13:43.47 | cr2 | you use -lgnokii -lusb ? |
| 13:44.14 | twostupiddogs | I tryed but does not find the libusb ... |
| 13:44.25 | twostupiddogs | This is really strange. |
| 13:44.30 | cr2 | is it compiled with the same compiler ? |
| 13:44.55 | twostupiddogs | yes, only that opie2 is using the -m32 |
| 13:45.01 | twostupiddogs | x86_64 here. |
| 13:45.22 | cr2 | it should have nothing to do with gnokii |
| 13:45.38 | twostupiddogs | I know. |
| 13:45.54 | cr2 | you only compile some tools with -m32, because qtopia wants that for some reason. |
| 13:46.00 | twostupiddogs | it also links to libX11 ??? |
| 13:46.09 | cr2 | gnokii ? |
| 13:46.12 | twostupiddogs | ok there is an interface, but why in the lib |
| 13:46.15 | twostupiddogs | yes |
| 13:46.31 | cr2 | maybe, because it depends on libxpm |
| 13:46.32 | twostupiddogs | I'll try rebuilding gnokii |
| 13:46.45 | cr2 | with different flags |
| 13:46.51 | cr2 | for ./configure |
| 13:47.07 | cr2 | to removed all unneeded junk |
| 13:47.08 | twostupiddogs | he? |
| 13:47.19 | twostupiddogs | ho, ok |
| 13:47.22 | cr2 | like ringtones and so on. |
| 13:47.35 | twostupiddogs | you have a list? |
| 13:47.47 | cr2 | run .configure for gnokii |
| 13:47.58 | cr2 | ./configure --help |
| 13:48.18 | twostupiddogs | bitbake cleaning. |
| 13:51.39 | twostupiddogs | not many explanation here about options |
| 13:53.47 | twostupiddogs | ok gotta go, I'll try this this evenig. THX |
| 13:53.51 | twostupiddogs | cya |
| 13:54.44 | *** join/#htc-linux twostupiddogs (n=towstupi@84.18.144.39) |
| 13:55.16 | twostupiddogs | cr2: I see a Build Static Lib: yes isn't it maybe that I should use that? |
| 13:55.29 | twostupiddogs | really gotta go now, will read response later. |
| 15:20.28 | *** join/#htc-linux WizMaui (n=WizMaui@62.112.90.250) |
| 15:25.54 | BabelO | cr2: are you around ? |
| 15:26.41 | BabelO | is there a daemon that manage this device in greephone /dev/omega_detect ? |
| 15:32.53 | *** join/#htc-linux goxboxlive (n=goxboxli@176.84-48-210.nextgentel.com) |
| 15:39.25 | goxboxlive | aloha |
| 15:39.39 | BabelO | :) |
| 15:40.03 | goxboxlive | well 'm back trying again to compile this opie2 stuff. |
| 15:40.27 | goxboxlive | I havent edited any file is my opie2 source. Should i do that? |
| 15:40.50 | BabelO | goxboxlive: no depend on error message |
| 15:41.51 | goxboxlive | But since i have the same source as you and cr2. WHy it this happening only to me? |
| 15:42.12 | goxboxlive | we are also using the same crosscompiler with symlinks |
| 15:43.28 | goxboxlive | Take a look at this http://pastebin.no/1435 could it be dbuis related? Look at the end of line 1 |
| 15:44.59 | cr2 | goxboxlive: i've not compiled to an end. |
| 15:45.10 | cr2 | QValueSpaceObject <- where is it defined = |
| 15:45.13 | goxboxlive | cr2: Where did it failed for you? |
| 15:45.41 | cr2 | it did not fail, i need to put this item* file into opie2 source. |
| 15:45.55 | goxboxlive | ok |
| 15:46.04 | *** join/#htc-linux Whacko (n=Whacko@s5593e8a2.adsl.wanadoo.nl) |
| 15:46.14 | cr2 | bt_sco* is probably in some lowlevel bluetooth library, it's not opie - related. |
| 15:49.25 | BabelO | goxboxlive: QValueSpaceObject:: is inside opie |
| 15:49.32 | goxboxlive | hmm i have added this file now, but still the same: itemcontrol.h qbootsourceaccessory.cpp qbootsourceaccessory.h |
| 15:49.48 | BabelO | i remove bt_sco from files because it is sound related |
| 15:51.39 | goxboxlive | ok, thx |
| 15:52.26 | goxboxlive | I deleted all in my build directory. I'll try a new attempt |
| 15:52.31 | goxboxlive | ~ping ljp |
| 15:52.33 | apt | pong ljp |
| 15:53.38 | goxboxlive | BabelO: Does this look ok? configure -device htcphone -image /media/usbdisk-2 or should i add something else? |
| 15:57.32 | *** join/#htc-linux BabelOued (n=Fabrice@lun34-2-82-238-28-28.fbx.proxad.net) |
| 16:00.07 | BabelOued | goxboxlive: i use only -device htcphone :) |
| 16:00.11 | BabelOued | so it is ok |
| 16:00.43 | goxboxlive | ok, i have to add image because i am installing it straight to a sd card with console image on |
| 16:01.04 | BabelOued | ~ping BabelO |
| 16:01.07 | apt | pong BabelO |
| 16:01.34 | goxboxlive | BabelO: Why isent there any files in gnokii at xanadux sf? |
| 16:01.37 | BabelOued | strange |
| 16:01.46 | goxboxlive | http://xanadux.cvs.sourceforge.net/xanadux/opie2/src/3rdparty/libraries/gnokii/ only folders |
| 16:02.01 | BabelOued | goxboxlive: because standard gnokii is working since pH5 kernel module |
| 16:02.11 | goxboxlive | that's right, you told me that |
| 16:02.20 | BabelOued | only some update or a patch to support special HTC command |
| 16:02.36 | goxboxlive | Do you know if universal is using it? I havent noticed |
| 16:03.43 | BabelOued | i don't know for universal, do you need gsmd running to send at command to ttyS0 ? |
| 16:04.11 | goxboxlive | I havent tried so i dont know. Have to ask cr2. |
| 16:07.39 | cr2 | BabelOued: then we should remove the gnokii subdirectory names from CVS |
| 16:08.07 | cr2 | and also change the linux-blueangel-g++ to linux-htcphone-g++ |
| 16:08.44 | BabelOued | yes |
| 16:08.50 | BabelOued | what is omega_detect ? |
| 16:09.46 | BabelOued | i understand what it is and it use, but where is coming from ? |
| 16:09.57 | BabelOued | kernel module or daemon ? |
| 16:11.03 | goxboxlive | cr2: Are we using the module pH5 made? If we not, can we use it? |
| 16:11.32 | BabelOued | goxboxlive: if you not use it then it is not needed |
| 16:11.43 | *** join/#htc-linux shirour (n=shirour@80.178.124.53.adsl.012.net.il) |
| 16:11.52 | goxboxlive | ok |
| 16:11.57 | shirour | hi goxboxlive |
| 16:12.06 | goxboxlive | hi there |
| 16:12.16 | BabelOued | it is for BA /hima/magician to speak to modem whitout saying 0x16/0x2 stuff |
| 16:12.25 | goxboxlive | ok |
| 16:12.43 | shirour | hi everybody - i'm trying to compile qtopia as well. my goal is to get helix and tpanel working.... is anyone here familiar with tpanel? |
| 16:13.01 | BabelO | what is tpanel ? |
| 16:15.02 | shirour | touchscreen driver for qtopia... (i've been using export QWS_MOUSE_PROTO=TPanel:/dev/input/event0) |
| 16:15.16 | shirour | i have a precompiled version that works, but i want to compile one on my own |
| 16:15.22 | BabelO | ok, we use tslib here |
| 16:15.56 | BabelO | what is your device ? |
| 16:16.16 | shirour | it's a mp3 player with arm cpu |
| 16:16.37 | BabelO | ok :) |
| 16:40.42 | cr2 | BabelOued: a kernel driver |
| 16:40.59 | BabelO | ok bad... |
| 16:41.04 | cr2 | goxboxlive: we don't need any driver from pH5 |
| 16:41.27 | cr2 | because our AT channel is plain ascii, and not multiplexed in any way. |
| 16:41.31 | BabelO | we can do same think with a daemon |
| 16:41.46 | BabelO | they use this to detect all event |
| 16:42.06 | cr2 | BabelO: i wish they have written a 2.6 kernel |
| 16:42.49 | cr2 | otherwise it's the same sharp-zaurus approach which leads to heave development fragmentation. |
| 16:43.20 | cr2 | if i had a greenphone, i've already registered the 2.6 kernel project ;) |
| 16:43.41 | BabelO | :) |
| 16:43.54 | cr2 | most of the hardware can be easily supported, and disassembling the rest is not rocket science. |
| 16:44.04 | BabelO | i can do same thing in opie directly without a kernel module |
| 16:44.28 | cr2 | yes. |
| 16:49.59 | goxboxlive | ok |
| 16:53.15 | goxboxlive | seems like there will be an upgrade to 1.2.21 next week. Are we ready for that? |
| 16:53.20 | goxboxlive | s/1.2.21/2.6.21/ |
| 17:00.31 | BabelO | what's new in 2.6.21 |
| 17:00.50 | cr2 | i think nothing pxa-related. |
| 17:01.29 | goxboxlive | ok |
| 17:04.09 | goxboxlive | cr2: I dont think it is qtopia-4.2.2 we are compiling. Seems lik eit is 4.2.1 |
| 17:04.33 | BabelO | goxboxlive: yes, but look at release note |
| 17:04.36 | goxboxlive | http://projects.linuxtogo.org/plugins/scmsvn/viewcvs.php/?root=opie |
| 17:04.37 | goxboxlive | ok |
| 17:05.02 | goxboxlive | I haveent got any mail about updates. |
| 17:05.10 | goxboxlive | Probably the mailing list isent working |
| 17:06.13 | BabelO | i ll look at qtopia, i send you link in around 30mn |
| 17:07.51 | goxboxlive | BebelO Did you know that you also are able to build ipk's ? |
| 17:19.56 | *** join/#htc-linux elementz (i=elementz@ip40.214.reserved.ish.de) |
| 17:21.23 | elementz | hi everybody - whats a good channel to get help on my new tytan - am wondering on how to sync with linux, and how to share network connection via usb - maybe somebody can point me into the right direction? |
| 17:27.59 | goxboxlive | synce |
| 17:28.09 | elementz | huh? |
| 17:28.39 | goxboxlive | google for synce |
| 17:28.48 | elementz | ah thx |
| 17:29.02 | BabelO | goxboxlive: i don't know for ipk |
| 17:29.40 | elementz | very nice, thx |
| 17:29.54 | elementz | how about network sharing - on either windows or linux? |
| 17:30.23 | goxboxlive | BabelO: I have done it. But i don't remember how i did. |
| 17:31.49 | goxboxlive | BabelO: Mine is failing at bt_sco. Where do i remove the bt_sco stuff? |
| 17:32.00 | BabelO | elementz: network sharing on BA or computer ? |
| 17:32.10 | BabelO | yes :) |
| 17:32.16 | elementz | sry BA means what? |
| 17:32.44 | BabelO | sorry, network sharing on your mobile device ? |
| 17:32.51 | BabelO | or for your mobile device ? |
| 17:33.14 | goxboxlive | pastebin.no/1436 |
| 17:33.21 | elementz | well i'd love to acces the inet from my mobile via my pc since i don't have wlan right now - maybe it's even possible to do that via bt? |
| 17:33.40 | goxboxlive | elementz: Everything is here: http://www.synce.org/index.php/SynCE-Wiki |
| 17:34.03 | elementz | ok thx - does that go for win as well? |
| 17:34.13 | goxboxlive | no idea |
| 17:34.17 | elementz | kk |
| 17:34.26 | BabelO | elementz: so it s like this if your pc is running linux |
| 17:34.28 | BabelO | echo 1 > /proc/sys/net/ipv4/ip_forward |
| 17:34.28 | BabelO | iptables -t nat -A POSTROUTING -s 10.0.0.0/24 -o eth0 -j MASQUERADE |
| 17:34.50 | elementz | kk - i'll have a look into that |
| 17:34.52 | BabelO | where 10.0.0.0 is your source network, ip address of your mobile device |
| 17:35.42 | elementz | one more question - how likely is it that linux will be completely portet to the tytn? |
| 17:37.01 | BabelO | goxboxlive: it is better now ;) |
| 17:37.01 | *** join/#htc-linux FossiFoo (n=Fossi@e176120168.adsl.alicedsl.de) |
| 17:37.02 | BabelO | you have to coment bt_sco, i don't know from which library it is coming from |
| 17:37.03 | goxboxlive | ok |
| 17:37.09 | goxboxlive | could it be qbluetoothhsservice.cpp |
| 17:38.04 | goxboxlive | QBluetoothHeadsetService::~QBluetoothHeadsetService() |
| 17:38.05 | goxboxlive | { |
| 17:38.05 | goxboxlive | <PROTECTED> |
| 17:38.05 | goxboxlive | <PROTECTED> |
| 17:38.05 | goxboxlive | <PROTECTED> |
| 17:38.05 | goxboxlive | <PROTECTED> |
| 17:38.05 | goxboxlive | <PROTECTED> |
| 17:38.06 | goxboxlive | <PROTECTED> |
| 17:38.06 | goxboxlive | <PROTECTED> |
| 17:38.06 | goxboxlive | <PROTECTED> |
| 17:38.06 | goxboxlive | } |
| 17:38.07 | BabelO | yes only bt_sco line |
| 17:38.28 | BabelO | there are other line like this |
| 17:38.50 | goxboxlive | ok i'll try |
| 17:49.21 | *** join/#htc-linux BabelOued (n=Fabrice@lun34-2-82-238-28-28.fbx.proxad.net) |
| 18:13.42 | *** join/#htc-linux apt (i=ibot@pdpc/supporter/active/TimRiker/bot/apt) |
| 18:13.42 | *** topic/#htc-linux is HTC Linux Channel: Find logs at http://apt.rikers.org/%23htc-linux/ | please check http://handhelds.org/moin/moin.cgi/HTC_2dPhones | http://wiki.xda-developers.com/index.php?pagename=Xanadux | <cr2> let's define a common setup. |
| 18:15.53 | goxboxlive | BabelOued: Why is it saying this? pastebin.no/1437 |
| 18:16.01 | goxboxlive | It's actually 4.2.2 |
| 18:16.13 | goxboxlive | dbus ok, and bluetooth not ok |
| 18:20.22 | *** join/#htc-linux scorpio16v (n=scorpio1@ACB3468B.ipt.aol.com) |
| 18:25.38 | *** join/#htc-linux cyrill62 (n=cyrill62@80.220.20.81.dynamic.adsl.abo.nordnet.fr) |
| 18:37.19 | *** join/#htc-linux MrVanx (n=chatzill@82-69-60-250.dsl.in-addr.zen.co.uk) |
| 18:47.50 | BabelO | goxboxlive: you have fixed bluetooth ? |
| 18:54.36 | *** join/#htc-linux g3gg0_ (n=g3gg0@ppp-82-135-86-181.dynamic.mnet-online.de) |
| 19:16.14 | *** join/#htc-linux pleemans (n=peter@d51A5E76A.access.telenet.be) |
| 19:24.20 | *** join/#htc-linux Tjikkun (n=tjikkun@82-204-54-115.dsl.bbeyond.nl) |
| 19:43.07 | BabelO | nobody this evening ? |
| 19:45.10 | *** join/#htc-linux goxboxlive (n=goxboxli@176.84-48-210.nextgentel.com) |
| 20:18.29 | goxboxlive | ok, i am now tired of kubuntu. It hangs my system so much. I'll replace it again. |
| 20:18.30 | BabelO | goxboxlive: you use kunbuntu ? not suse ? |
| 20:18.31 | goxboxlive | BabelO: I have never tried SUSE. I have mostl been using debian, but has also tried out kubuntu (allmost debian) and redhat/fedora |
| 20:18.33 | goxboxlive | A friend of mine uses suse and he is saying that is realy great, but i am so used to the apt-get so i stick to debian. |
| 20:18.34 | goxboxlive | Well, i'll be back on a couple of hours :-) Reinstalling. |
| 20:19.13 | BabelO | :) |
| 20:19.22 | *** join/#htc-linux twostupiddogs (n=towstupi@62.123.180.130) |
| 20:20.10 | twostupiddogs | BabelO: good evening. |
| 20:20.19 | Kevin2 | cr2: Are you still here? |
| 20:20.20 | twostupiddogs | is gnokii-0.6.14 a good version? |
| 20:20.21 | BabelO | good evening |
| 20:20.38 | BabelO | hum if you can compile it then yes |
| 20:21.03 | twostupiddogs | well, it is the one that's giving me problems with linked libs ... |
| 20:21.36 | twostupiddogs | anyway it is the one used by angstrom in OE so it should be ok |
| 20:28.19 | *** join/#htc-linux goxboxlive (n=goxboxli@176.84-48-210.nextgentel.com) |
| 20:35.36 | *** join/#htc-linux apt (i=ibot@pdpc/supporter/active/TimRiker/bot/apt) |
| 20:35.36 | *** topic/#htc-linux is HTC Linux Channel: Find logs at http://apt.rikers.org/%23htc-linux/ | please check http://handhelds.org/moin/moin.cgi/HTC_2dPhones | http://wiki.xda-developers.com/index.php?pagename=Xanadux | <cr2> let's define a common setup. |
| 20:35.48 | Kevin2 | cr2: Looks like wifi on hermes is attached to IIS. |
| 20:36.31 | cr2 | hi |
| 20:37.02 | cr2 | Kevin2: what is the purpose ? |
| 20:37.49 | cr2 | i2s is like msb spi, but it sounds unrealistic |
| 20:38.01 | Kevin2 | If I trace reads/writes to IIS registers, I get in a feedback loop with wifi. So, I'm guessing the wifi chip is fed via IIS. |
| 20:38.25 | cr2 | what about ak4641 ? |
| 20:38.48 | Kevin2 | I don't see why that would cause a feedback loop. I'm not playing any sounds. |
| 20:39.00 | cr2 | it must be also attached somewhere . |
| 20:39.44 | cr2 | i've put ? in wiki on the i2s registers, because the decoded gpcon did not show it |
| 20:40.06 | cr2 | maybe we should decode them when the sound is played. |
| 20:40.26 | Kevin2 | What do you suspect is on i2c? |
| 20:40.42 | cr2 | i2c is a control channel |
| 20:41.25 | cr2 | i know 3 wifi configurations used by htc now |
| 20:41.40 | cr2 | 1. memory-mapped which is supported in linux |
| 20:42.05 | cr2 | 2. pcmcia, which we still can't make run |
| 20:42.23 | psokolovsky | Kevin2: hi! |
| 20:42.31 | cr2 | 3. something using pxa-mci (probably SDIO) on athena. |
| 20:42.54 | psokolovsky | Kevin2: we'd like to switch htcapache which is currently broken regarding battery stuff to adc_battery driver. ok? |
| 20:42.55 | cr2 | using i2s for wifi sounds crazy |
| 20:43.40 | Kevin2 | psokolovsky: I'm okay with it, my apache is in a weird state, so I don't know if I will be able to test. |
| 20:44.00 | Kevin2 | cr2: How do you telnet into hermes? Via usb or wifi? |
| 20:44.10 | cr2 | wifi |
| 20:44.26 | cr2 | usb should use rndis, and it's normally not supported |
| 20:45.14 | psokolovsky | Kevin2: I see. ok, that can wait. it is still better than to leave it broken or fix old code. the driver itself works for bunch of other devices, so should work for apache, or would easy to fix in rare case it wouldn't |
| 20:45.39 | cr2 | psokolovsky: is it the ad7877 ? |
| 20:46.29 | psokolovsky | cr2: well, apache has ad7877, there's an ADC driver for it, than there's a generic ADC battery driver. the talk about the latter. |
| 20:47.31 | cr2 | ok, but ad7877 is also used on athena, so we will need it in the future and it will be used and tested. |
| 20:47.52 | psokolovsky | cr2: perfect! all drivers are already there ;-) |
| 20:48.30 | cr2 | great. |
| 20:55.42 | *** part/#htc-linux rmoravcik (n=rmoravci@adsl-dyn49.91-127-60.t-com.sk) |
| 20:58.10 | cr2 | psokolovsky: what are your plans on asic3 ? will you create the "flat" version of *_[sg]et_dir() and *_[sg]et_alt() ? |
| 21:00.36 | Kevin2 | cr2: Ughh.. You are right. |
| 21:01.53 | Kevin2 | I wasn't tracing iis - I was tracing SD registers. 0x5A000000 |
| 21:02.11 | cr2 | hm. interesting |
| 21:02.28 | cr2 | that can explain why the SD card does not work. |
| 21:02.54 | cr2 | then it's a bad sign, actually. |
| 21:03.09 | Kevin2 | Give it a shot . Do a "cvs up", and then run: ignoreirqwatch 38 ; addlist mmutrace p2v(0x5a000008) 4096 |
| 21:03.53 | Kevin2 | I've expanded mmutrace so that it can handle arbitrary addresses and ranges. |
| 21:04.14 | cr2 | i need to reboot the notebook to connect to the ap. will take some time. pmcia support on amd64 is not great. |
| 21:05.47 | cr2 | so if i understand you correctly, wifi is on s3c2442 sdio, and SD is on ati. |
| 21:06.01 | cr2 | the SDHC.dll supports both. |
| 21:06.38 | cr2 | on athena the wifi is on pxa270 -sdio. don't know where is the miniSD. |
| 21:06.44 | Kevin2 | Can't they both be on s3c2442 sdio? (Not saying they are, but couldn't they be?) |
| 21:06.45 | cr2 | sounds consistent. |
| 21:06.48 | psokolovsky | cr2: well, you know, we're demand-driven ;-) I don't have such need, but if you need, please do, or I can add it to my queue. the nearest plan is to submit it to mainline ;-) |
| 21:07.30 | cr2 | psokolovsky: i think there is a lot of junk in the asic3_base |
| 21:07.53 | psokolovsky | cr2: possibly, some |
| 21:08.40 | cr2 | i vote for getting rid of the split *_a,b,c,d api completely. |
| 21:08.46 | Kevin2 | cr2: I'm not tracing i2c registers, but I don't see any accesses. Any idea what would be attached to it? |
| 21:08.51 | Kevin2 | s/not/now/ |
| 21:09.34 | cr2 | Kevin2: ak4641. play the sound and change volume. |
| 21:09.45 | psokolovsky | cr2: nice plan, we would need to do that eventually. but I don't think that's a priority, we cna do that gradually. your recent commits are good start for that |
| 21:09.50 | cr2 | or record the sound. |
| 21:10.56 | cr2 | psokolovsky:_ that's why i'd like to have a common _dir() and _alt(). i've already cleaned himalaya, and see the necessity. |
| 21:11.23 | psokolovsky | cr2: plus, don't forget that anility to set/get few GPIOs in once still might be needed once in infinity ;-). but I agree that standard accessors should be flat namespace ones |
| 21:11.57 | Kevin2 | cr2: You're right - sound causes i2c activity. |
| 21:12.07 | psokolovsky | cr2: ok, as I as say, feel free to do that, or I can do some time later. but .21 upgrade probably more priority still |
| 21:12.13 | cr2 | i'm also not completely happy with the asic3 init by a huge 16bit values structure. |
| 21:12.33 | cr2 | ok. i'm always trying not to break other ports anyway. |
| 21:15.45 | cr2 | i'm targeting at something like cpld->gpio->[sg]et_value(N) for several other devices too. |
| 21:19.37 | Kevin2 | cr2: Do we know what keyboard chip is in use? |
| 21:21.12 | cr2 | it's a 16f* microcontroller connected over spi. like on the blueangel. |
| 21:21.32 | cr2 | all the keycodes are in xda-dev wiki. |
| 21:24.35 | Kevin2 | Neat. Trace of spi shows keycodes also. |
| 21:25.55 | cr2 | well, that's how i got them :) |
| 21:27.02 | Kevin2 | :-) |
| 22:30.44 | *** join/#htc-linux goxboxlive (n=goxboxli@176.84-48-210.nextgentel.com) |
| 22:32.59 | *** join/#htc-linux goxboxlive (n=goxboxli@176.84-48-210.nextgentel.com) |
| 22:33.26 | goxboxlive | test |
| 22:33.45 | goxboxlive | talk to me |
| 22:33.51 | goxboxlive | i need to set colors |
| 22:36.59 | *** join/#htc-linux goxboxlive (n=goxboxli@176.84-48-210.nextgentel.com) |
| 22:38.40 | goxboxlive | test |
| 22:40.14 | Kevin2 | Hi goxboxlive |
| 22:40.18 | Kevin2 | test |
| 22:40.26 | goxboxlive | hi Kevin2, thx :-) |
| 23:01.14 | twostupiddogs | BabelO: you here? |
| 23:02.01 | twostupiddogs | goxboxlive: does your screen turn off when you close the universal? I mean is hinge working for you? |
| 23:02.24 | twostupiddogs | in opie-image |
| 23:02.53 | goxboxlive | twostupiddogs hi, no its not. It because we need to update the odevice_htc.cpp |
| 23:04.08 | tsdogs | ok, just to have a confirmation. I have looked at the code, but it seems that the driver is not even sending messages to the odevice code :/ |
| 23:04.34 | tsdogs | anyway, I'm still trying to do a opie2 build but have troubles with the gnokii lib |
| 23:04.49 | tsdogs | is the libusb and libbluethoot needed for this? |
| 23:04.51 | goxboxlive | ok, it worked before, but after we moved over to hh.org it hasent worked |
| 23:05.24 | goxboxlive | i dint think so, mine compiled but buetooth failed for me |
| 23:05.29 | tsdogs | could it be a kernel issue? the backlinght |
| 23:05.41 | tsdogs | s/linght/light/ |
| 23:05.43 | goxboxlive | no the |
| 23:06.02 | tsdogs | he? |
| 23:06.11 | goxboxlive | backlight is wroking as it should, but we need to clean up the odevice_htc |
| 23:06.33 | tsdogs | sorry I mean the hinge. |
| 23:06.59 | goxboxlive | we had it like swithces before, now it's under /dev/event/input2 |
| 23:07.11 | tsdogs | also the /dev/input/event1 coded is not very nice :( |
| 23:07.23 | goxboxlive | in opie? |
| 23:07.33 | tsdogs | the code is opening the input1 |
| 23:08.06 | tsdogs | the odevice is also saying that he initialized it well |
| 23:08.13 | tsdogs | :( |
| 23:08.19 | tsdogs | you sure it's event2 |
| 23:08.19 | goxboxlive | yes i know it's hardcoded. The guy who fixed this he looked how the zaurus was doing it. We better look at the ipaq, they have done it as it should be |
| 23:08.49 | tsdogs | ok I'll check that out and test it |
| 23:09.14 | goxboxlive | event0 = TS, event1 = Powerbutton, event2 = all buttons and hinge, event3 = keybaord |
| 23:09.27 | tsdogs | what about gnokii (do you have thoose libs in /usr/local/arm/lib?) |
| 23:09.28 | tsdogs | ok |
| 23:09.43 | goxboxlive | tsdogs, do youknow that the key leds are working? |
| 23:10.06 | tsdogs | you mean the leds behynd the keyboard? |
| 23:10.10 | goxboxlive | yes |
| 23:10.38 | tsdogs | I was wondering how it works, has it got a light sensor somewhere? |
| 23:10.40 | goxboxlive | echo 1 > /sys/clas/leds/blabala/keyleds/brigthness |
| 23:10.45 | goxboxlive | no |
| 23:11.08 | goxboxlive | we have a lightsensor, but it is comment in the source. It kills our TS |
| 23:11.27 | goxboxlive | ANd the fun part with oie and key-led |
| 23:11.29 | tsdogs | well in wince the keyboard lights up only when it's dark |
| 23:12.09 | tsdogs | no wait, it's hinge related |
| 23:12.12 | goxboxlive | when you use power setup that lcd should be turned off agfter xx sec. the key-led is also shutting off. When you hit the keyboard or ts the lcd turns on and the ley-led also :-) |
| 23:12.31 | goxboxlive | tsdogs: I know, but thats wince |
| 23:12.59 | goxboxlive | We should also had it like that, but no rush, we need to have the driver working first (light sensor) |
| 23:13.24 | tsdogs | ok I thought it would be cool to use the camera to see if there's enough light and then light it up :) |
| 23:13.37 | tsdogs | but that's for future work :) |
| 23:14.14 | goxboxlive | yes that would also be cool |
| 23:15.07 | tsdogs | anyway back to gnokii |
| 23:15.30 | tsdogs | do you have thoose libs (libusb and libbluethooth) in /usr/local/arm/lib? |
| 23:16.03 | tsdogs | btw I have tested kubuntu too, but as you found out is way too much unstable. |
| 23:16.32 | goxboxlive | yes it looks good, but it failed so much |
| 23:16.40 | goxboxlive | no |
| 23:17.20 | goxboxlive | jrs@linuxserver:/usr/local/arm/lib$ ls |
| 23:17.20 | goxboxlive | libdbus-1.so libts-0.0.so.0 libts-0.0.so.0.1.1 libts.la libts.so pkgconfig ts |
| 23:17.32 | tsdogs | i'm using fedora. the only thing i really would want to have is apt-get. yum is so slow |
| 23:17.40 | tsdogs | where's your libgnokii = |
| 23:17.47 | tsdogs | s/=/?/ |
| 23:19.29 | *** join/#htc-linux hugo_nz (n=hugo@60-234-142-71.bitstream.orcon.net.nz) |
| 23:20.11 | goxboxlive | in 3rdparty/libaries/gnokii i guess |
| 23:21.12 | tsdogs | You haven't managed to compile further then ? it won't build in there anyway untill we edit the .pro file |
| 23:21.38 | tsdogs | do you know if we need the usb / bluetooth features? |
| 23:22.09 | tsdogs | I think I could drop the bluetooth but not usb, as I saw you talking about ttyUSB0 for gnokii |
| 23:22.54 | goxboxlive | yes the ttyUSB0 is our gprs/UMTS port |
| 23:23.09 | goxboxlive | just copy the libusb in arm/lib |
| 23:23.45 | tsdogs | done this morning, but it complains that ld is not finding it ??? |
| 23:24.02 | tsdogs | warning: libusb-0.1.so.4, needed by /usr/local/arm/lib/libgnokii.so, not found (try using -rpath or -rpath-link) |
| 23:24.56 | tsdogs | ho, maybe compiler is right, the libs should go in /usr/lib so it's expecting them to be in that path? |
| 23:27.16 | tsdogs | nope, don't think this is my case. rpath is for something else |
| 23:36.13 | tsdogs | goxboxlive: how far did you go with opie2? |
| 23:36.22 | tsdogs | still here btw? |
| 23:36.35 | goxboxlive | i'm here |
| 23:36.52 | goxboxlive | i got to some bt stuff, hold on i show you |
| 23:37.17 | goxboxlive | http://pastebin.no/1436 |
| 23:38.03 | tsdogs | ok simple, almost where i am |
| 23:38.22 | tsdogs | edit in the build dir the src/server/Makefile.target |
| 23:38.53 | goxboxlive | how do i edit it? |
| 23:39.06 | tsdogs | add -lgnokii at the end of LIBS = row |
| 23:39.21 | tsdogs | though you'll need libgnokii.so |
| 23:39.40 | tsdogs | I'm using the one from OE, with removed X deps |
| 23:39.55 | goxboxlive | ok |
| 23:39.55 | goxboxlive | thx |
| 23:40.22 | tsdogs | and then I'm here stuck with this stupid error ... |
| 23:40.32 | goxboxlive | i c |
| 23:40.46 | tsdogs | I'm thinking it's an OE my environment problem... :/ |
| 23:41.09 | goxboxlive | ok |
| 23:42.45 | goxboxlive | how is BabelO doing it with the gnokii.so? |
| 23:42.55 | tsdogs | if you want I built gnokii with this opition added to the bb EXTRA_OECONF = "--without-xgnokiidir --without-x" |
| 23:43.16 | tsdogs | I have no idea, also cr2 has had no problem. |
| 23:43.31 | tsdogs | That's why I'm thinking about my OE env. |
| 23:43.45 | tsdogs | If you pass this, it defenatly is my env |
| 23:43.55 | goxboxlive | the OE version is .14 the one BabelO is using is .13 |